BIS - LIMS (Laboratory Information Management System)

BIS, Hyderabad Branch Laboratory (HYBL)

Bureau of Indian Standards, Hyderabad Branch Laboratory, Plot no 1, Sy no 367/1, Moula ali, Hyderabad -500 040, Hyderabad, Hyderabad, Telangana, 500040

8096000013 hybl@bis.gov.in

Scope List

Reset

32 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 16008 : Part 2 (2016)

Agro textiles “ Shade nets for agriculture and horticulture purposes “ Specification Part 2 Shade nets made from mono filament yarns (first revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (HDPE Mono filament)	-
4.1 (HDPE Mono filament)	-
4.2 (Fabric)	-
4.3 (Colour)	-
5.0 (Types)	-
6.1 (Dimensions and mass)	-
6.2 Table 1 (Mass g/m2,Min)	-
6.2 Table 1 (Average breaking strength of shade nets fabric (Strip method,Warpway,Weftway 325 mm × 50 mm test piece with gauge length of 200 mm), N, Min )	-
6.2 Table 1 (Warpway Weftway)	-
6.2 Table 1 (Retention of breaking strength after UV exposure, N, Min)	-
6.2 Table 1 (Shading %)	-

Partial

Except raw material test, Colour fastness of artificial light and Bursting pressure test

IS 16008 : Part 1 (2016)

Agro textiles “ Shade nets for agriculture and horticulture purposes “ Specification Part 1 Shade nets made from tape yarns (first revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Dimensions and Mass - IS 1954)	-
6.2 Table 1 (Mass - IS 1964)	-
6.2 Table 1 (Average breaking strength of shade nets fabric (Strip method, 325 mm x 50 mm test piece with gauge length of 200 mm) - IS 1969 (Part 1))	-
6.2 Table 1 (Average breaking strength of shade nets fabric (Strip method, 325 mm x 50 mm test piece with gauge length of 200 mm) - IS 1969 (Part 1))	-
6.2 Table 1 (Retention of breaking strength after UV exposure - IS 1969 (Part 1))	-
4.3, 4 (Colour)	-
4.1, 4 ( HDPE Tapes Linear density )	-
4.1, 4 (HDPE Tapes Width )	-
4.1, 4 (HDPE Tapes UV stabilizer)	-
4.1, 4 (HDPE Tapes Material Identification )	-
6.2 Table 1 (Shading Percentage)	-

Partial

Except raw material test, Colour fastness of artificial light and Bursting pressure test

IS 17730 : Part 2 (2021)

Agro-Textiles Hail Protection Nets for Agriculture and Horticulture Purposes Specification Part 2 Woven Hail Protection Nets

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 7, Table 1, (i) (Mass in g/m2, (with a tolerance of ± 5 percent))	-
Clause 7, table 1, (ii) a ("Average breaking strength of Woven hail protection fabric (Strip method, 325 × 50 mm test piece with gauge length of 200 mm), N,Min,(a) Warpway")	-
Clause 7,table 1, (ii) b ("Average breaking strength of woven hail protection fabric (Strip method, 325 × 50 mm test piece with gauge length of 200 mm), N,Min,(b) Weftway")	-
Clause 7, table 1, (iii) ("Retention of breaking strength after UV exposure of 144 hours, percent, Min")	-
Clause 7, table 1, (vii) (Porosity, percent)	-
Clause 7, table 1, (ix) (Seam (joint) strength, percent, Min)	-
7.1 (Dimensions)	-
Cl-4.1 (HDPE Monofilament)	-
Cl-6.1 (Fabric)	-
Cl-6.2 (Reinforcement)	-
Cl-6.3 (Joints)	-
Cl-6.4 (Stitching)	-
Cl-6.5 (Colour)	-

Partial

Except Raw material, Colour fastness to artificial light, Bursting pressure, Shading percentage, Cold cracking resistance test and Limited test facility for UV resistance test.

IS 17730 : Part 1 (2021)

Agro-Textiles Hail Protection Nets for Agriculture and Horticulture Purposes Specification Part 1 Warp Knitted Hail Protection Nets

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 7, Table 1, (i) (Mass in g/m2, (with a tolerance of ± 5 percent))	-
Clause 7, table 1, (ii) a ("Average breaking strength of knitted hail protection fabric (Strip method, 325 × 50 mm test piece with gauge length of 200 mm), N,Min,(a) Wales direction")	-
Clause 7,table 1, (ii) b ("Average breaking strength of knitted hail protection fabric (Strip method, 325 × 50 mm test piece with gauge length of 200 mm), N,Min,(b) Course direction")	-
Clause 7, table 1, (iii) ("Retention of breaking strength after UV exposure of 144 hours, percent, Min")	-
Clause 7, table 1, (viii) (Seam (joint) strength, percent, Min)	-
4.1 (HDPE Monofilament (linear density))	-
6.1 (Fabric (width))	-
6.2 (Reinforcement)	-
6.3 (Joints)	-
6.4 (Stitching)	-
6.5 (Colour)	-
7.1 (Length, Width)	-

Partial

Except Raw material, Colour fastness to artificial light, Bursting pressure, Shading percentage, Cold cracking resistance test and Limited test facility for UV resistance test.

IS 17357 (2020)

Agro textiles – Harvest nets for agriculture and horticulture purposes - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause No. 4.1 (HDPE Monofilament density)	-
Clause No. 5.1 (Width of the Fabric)	-
Clause No. 6.2 (i) (Mass g/m²)	-
Clause No. 6.2 (ii) (Average breaking strength of wind shield net fabric (Strip method, 325×50 mm test piece with gauge length of 200 mm))	-
Clause No. 6.2 (iii) (Retention of breaking strength after UV exposure of 144 h)	-
Clause 7.1 (Length of the monofilament harvest nets)	-
4.1 (MATERIALS - HDPE Monofilament)	-
5.1 (MANUFACTURE - Fabric)	-
5.2 (MANUFACTURE - Colour)	-
5.3 (MANUFACTURE - Fixing of Eyelets)	-
7.1 (Packing)	-
7.2 (Marking)	-

Partial

Except Raw material Colour fastness to artificial light, Bursting pressure, Air permeability

IS 17356 (2020)

Agro textiles – Windshield nets for agriculture and horticulture purposes - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause No. 4.1 (HDPE Monofilament density)	-
Clause No. 5.1 (Width of the Fabric)	-
Clause No. 5.2.1 (Length of the Eyelet)	-
Clause No. 5.2.1 (Eyelet to Eyelet Edge Distance)	-
Clause No. 6 (Mass of the windshield nets)	-
Clause 7.2 (i) (Mass g/m²)	-
Clause 7.2 (ii) (Average breaking strength of wind shield net fabric (Strip method, 325×50 mm test piece with gauge length of 200 mm))	-
Clause 7.2 (iii) (Retention of breaking strength after UV exposure of 144 h)	-
5.1 (MANUFACTURE - Fabric)	-
5.3 (MANUFACTURE - Colour)	-
6 (TYPES - a) Type 1, b) Type 2)	-
8.1 (Packing)	-
8.2 (Marking)	-

Partial

Except Raw material, Colour fastness to artificial , Bursting pressure and Wind blockage.

IS 17355 (2020)

Agro textiles – Propylene spun bonded non-woven mulch mat for agricultural and horticultural applications - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause no. 6.1 & 8.3, Table-1 (i) (Lengthwise)	-
Clause no. 6.1 & 8.3, Table-1 (ii) (Width)	-
Clause no. 6.1 & 8.3, Table-1 (iii) (Mass)	-
Clause no. 6.1 & 8.3, Table-1 (iv) (Thickness)	-
Clause no. 6.1 & 8.3, Table-1 (v) a) (Tensile Strength, Machine Direction)	-
Clause no. 6.1 & 8.3, Table-1 (v) b) (Tensile Strength, Cross Direction)	-
Clause no. 6.1 & 8.3, Table-1 (vi) a) (Elongation, Machine Dir.)	-
Clause no. 6.1 & 8.3, Table-1 (vi) b) (Elongation, Cross Dir.)	-
Clause no. 6.1 & 8.3, Table-1 (vii) a) (UV stability, retained strength after UV exposure, Machine Dir.)	-
Clause no. 6.1 & 8.3, Table-1 (vii) b) (UV stability, retained strength after UV exposure, Cross Dir.)	-
Clause no. 6.1 & 8.3, Table-1 (viii) (Colour)	-
Clause no. 6.1 & 8.3, Table-1 (ix) (Ash Content)	-
Clause no. 6.1 & 8.3, Table-1 (x) a) (Trapezoid Tear Strength, Machine Direction)	-
Clause no. 6.1 & 8.3, Table-1 (x) b) (Trapezoid Tear Strength, Cross Direction)	-
Clause No. 4-(a) (Mass)	-

Partial

IS 16190 (2014)

Agro textiles - High density polyethylene (HDPE) laminated woven lay flat tube for irrigation purpose - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6. Table 2 v) IS 14714 (Abrasion resistance : Loss in breaking strength shall not be more than 15 percent)	-
6. Table 2 ix) a) IS 7016(Part 8) (Oven method) (Accelerated ageing test for 72 h at 70 ± 1°C: Loss in breaking strength shall not be more than 15 percent Wrap)	-
6. Table 2 iii) IS 1969 (Part 1) ( Elongation at break)	-
6.5 ( Length : Unless specified otherwise, the standard length shall be 30 m. A tolerance of +5 percent shall be permitted on the length prescribed for the lay flat tube by the purchaser. No negative tolerance shall be permitted)	-
6. Table 2 vi) a) IS 14293 ( Trapezoid tear strength: Wrap)	-
6. Table 2 vi) b) IS 14293 ( Trapezoid tear strength : Weft)	-
6. Table 2 i) IS 1964 (Mass)	-
6. Table 2 vii) Annex C (Puncture strength)	-
6. Table 2 ii) b) IS 1969 (Part 1) ( Breaking strength before UV exposure : Weft)	-
6. Table 2 ii) a) IS 1969 (Part 1) ( Breaking strength before UV exposure : Wrap)	-
4,4.1 IS 6192 ( MATERIALS HDPE Tapes)	-
4.2 IS 6899 (MATERIALS HDPE Fabric)	-
5,5.1 (MANUFACTURE Lamination )	-
6.7 IS 1969 (Part 1) (Welded Seam Strength Before UV Exposure : When a sample of fabric with seam cut from the lay flat tube is tested for welded seam strength as per the method specified in IS 1969 (Part 1), welded seam strength before UV exposure shall be not less than the 80 percent of the original actual fabric strength)	-

Partial

Except Raw material test, Retention of breaking strength after UV exposure of 500 h, Cold cracking resistance test, Hydrostatic Burst Pressure Test, Proof Pressure Test, Kink Test and Welded Seam Strength After UV Exposure

IS 16089 (2013)

Jute agro-textile – Sapling bags for growth of seedling/ sapling – Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 4, Table 1, (i) (Mass, g/m², Min)	-
Clause 4, Table 1, (ii) (Thickness, mm)	-
Clause 4, Table 1, (iii) (Open area, percent)	-
Clause 4, Table 1, (iv) a (Threads/dm, Warp)	-
Clause 4, Table 1, (iv) b (Threads/dm, Weft)	-
Clause 4, Table 1, (v) (Width of Hessian fabric, cm)	-
Clause 4, Table 1, (vi) (Length and width of sapling bags, cm, Min)	-
Clause 4, Table 1, (vii) (Water holding capacity, percent)	-
Clause 4, Table 1, (viii) a (Tensile strength, kN/m, Warp)	-
Clause 4, Table 1, (viii) b (Tensile strength, kN/m, Weft)	-

Partial

complete test facility

IS 15907 (2010)

Agro textiles – High density polyethylene (HDPE) woven beds for vermiculture – Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.3 (Cord Beading - IS 15907)	-
5.2.1 (Thickness of coating film- method A of IS 13162 (Part 3))	-
5.2.2 (coating thickness of the sandwich lamination- method A of IS 13162 (Part 3))	-
5.3.1 (Construction- IS 15907)	-
5.3.1 (Construction- IS 15907)	-
5.3.1 (Construction- IS 15907)	-
5.3.1 (The width of the hem - IS 15907)	-
5.3.2 (Finished width of pocket - IS 15907)	-
5.4 (Bonding- IS 15907)	-
6- Table 1- SL.No (i) (Mass)	-
6- Table 1- SL.No (ii) (Breaking strength before UV exposure,warp - IS 1969 )	-
6- Table 1- SL.No (ii) (Breaking strength before UV exposure,weft - IS 1969 )	-
6- Table 1- SL.No (iii) (Elongation at break of fabric- IS 1969)	-
6- Table 1- SL.No (iv) (Retention of breaking strength after UV exposure, - Annex B of IS 15907 and IS 1969)	-
6- Table 1- SL.No (v) (Welded seam strength before UV exposure- IS 1969)	-
6- Table 1- SL.No (vi) (Welded seam strength after UV exposure- Annex B of IS 15907 and IS 1969)	-
6- Table 1- SL.No (vii) (Tear strength, Warp - Method A2 of IS 7016 (Part 3))	-
6- Table 1- SL.No (vii) (Tear strength, Weft - Method A2 of IS 7016 (Part 3))	-
6- Table 1- SL.No (viii) (Puncture strength - Annex C of IS 15907)	-
6.1 (Length -IS 15907)	-
6.1 (Width - IS 15907)	-
6.1 (Height - IS 15907)	-
4.1 (Linear Density)	-
4.1 (Width)	-

Partial

Except Raw material test, Colour fastness to artificial light, Bursting strength test, Environmental stress cracking test, Resistance to chemicals, change in the mass, Water Proofness and Limited test facility for UV stability test.

IS 17070 (2019)

Jute agrotextiles for growth of plant and suppression of weeds – Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5 -Table 1 -(i) (Mass at 20 percent moisture regain)	-
5 -Table 1 -(ii) (Thickness)	-
5 -Table 1 -(iii) (Width)	-
5 -Table 1 -(iv) (Wide width tensile strength)	-
5 -Table 1 -(v) (Tear strength)	-
5 -Table 1 -(vii) (Index Puncture resistance)	-
8 (Marking)	-

Partial

Except Air permeability test, Bursting strength.

IS 16202 (2014)

Agro textiles - Woven ground covers for horticulture application - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Linear Density, Denier)	-
4.2 (Plain Weave & Sett, ends & picks/dm)	-
4.3 (Colour)	-
5.1, Table-1 (Mass, g/m² , IS 1964)	-
5.1, Table-1 (Tensile Test, Kgf, IS 1969,Part-2)	-
5.1, Table-1 (Tear Strength, Kgf, IS 6489,Part-1)	-
5.1, Table-1 (Index puncture resistance, kgf, Annexure-B)	-
5.1, Table-1 (UV accelerated exposure testing, Annexure-C)	-
5.1, Table-1 (Water permeability, lt/m2 /s, IS 14324)	-
5.2 (Dimension and Mass)	-
Clause No. 7 (Packing thickness)	-

Partial

Except Raw material test, Air permeability test, Water vapour permeability and Limited test facility for UV stability test.

IS 16513 (2016)

Agro textiles “ Insect nets for agriculture and horticulture purposes “ Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6/6.1 ( REQUIREMENTS Dimensions and Mass a) Length)	-
6/6.1 ( REQUIREMENTS Dimensions and Mass b) width)	-
6/6.1 ( REQUIREMENTS Dimensions and Mass c) Mass gm/m2)	-
4.2 ( Netting Fabric)	-
4.2 ( Netting Fabric)	-
4.2 ( Netting Fabric)	-
5.0 (types a) Type I — having mesh of 30; b) Type II — having mesh of 40; andc) c) Type III — having mesh of 50)	-
4.3 ( Colour)	-
4.1 (Linear Density)	-
6.2/2 (Ends per Inch)	-
6.2/2 (Picks per Inch)	-
6.2/3 (cover factor)	-
6.2/4 (Breaking strength before U.V. Exposure (MD & TD))	-
6.2/5 (UV exposure 144 hours (100x65 + 44x40))	-
6.2/5 (Breaking strength after U.V. Exposure (MD & TD))	-

Partial

Except Raw material test, Air permeability test, Bursting strength test and Limited test facility for UV stability test.

IS 16718 (2021)

Textiles - Polypropylene Spun Bonded Non-Woven Crop Covers and Fruit Skirting Bags for Agricultural and Horticultural Applications - Specification (first revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.2.2 (Width of fabric)	-
5.4.2 -Table 1-(i) (Mango, Orange)	-
5.4.2 -Table 1-(ii) (Banana bunch)	-
5.4.2 -Table 1-(iii) (Grape bunch)	-
5.4.2 -Table 1-(iv) (Pomegranate)	-
5.4.2 -Table 1-(v) (Papaya)	-
5.4.2 - Table 2 - (i) (Thickness)	-
5.4.2 - Table 2 - (ii) (Fabric mass)	-
5.4.2 - Table 2 - (iii) (Breaking strength)	-
5.4.2 - Table 2 - (iv) (Elongation at break)	-
5.4.2 - Table 2 - (v) (Trapezoid tear strength)	-
5.4.2 - Table 2 - (viii) (UV stability test)	-
5.4.2 - Table 2 - (ix) (Ash content)	-
5.4.2 - Table 2 - (x) (Index puncture resistance)	-
5.4.2 - Table 2 - (xii) (Colour)	-
8.1.2 (Marking)	-

Partial

Except Raw material test, Air permeability test, Water vapour permeability test, Water absorption capacity test and Limited test facility for UV stability test.

IS 9685 (2002)

Textiles – Sand bags – Specification (first revision)

All

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4.1 (Sacking)	-
Cl-4.2 (Vent at the mouth, tying cord)	-
Cl-4.3 (Seam)	-
Cl-4.6 (Freedom from Defects)	-
Cl-5.1, Table-1 (i) ("Dimensions, cm a) Outside length")	-
Cl-5.1, Table-1 (i) ("Dimensions, cm b) Outside width")	-
Cl-5.1, Table-1 (ii) ("Corrected mass per bag, g: a) Unproofed")	-
Cl-5.1, Table-1 (ii) ("Corrected mass per bag, g: b) Proofed")	-
Cl-5.1, Table-1 (iii) (Average breaking load of seam [ ravened strip method, [5 cm x 20 cm] A4irr,N ( kgf): Warpway)	-
Cl-5.1, Table-1 (iii) (Average breaking load of seam [ ravened strip method, [5 cm x 20 cm] A4irr,N ( kgf): Weftway)	-
Cl-5.3, Table-2 (i) (Total number of bags per bale)	-
Cl-5.3, Table-2 (ii) (Number of joined bags per bundle of 25 bags)	-
Cl-5.3, Table-2 (iii) (Corrected net mass ofa bale)	-
Cl-5.3, Table-2 (iv) (Moisture regain, percent, Max)	-
Cl-5.4 (Moisture)	-
Cl-7 (Marking)	-

Partial

IS 16352 (2020)

Geosynthetics – High density polyethylene (HDPE) geomembranes for lining – Specification (first revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5,3.1, Table1,x) Type I / II / III / IV / V / VI / VII IS 2530 (Carbon black content)	-
5,3.1, Table 2,xi) Type I / II / III / IV / V / VI IS 2530 (Carbon black content)	-
5,3.1, Table2,iii) Type I / II / III / IV / V / VI Annex K (Lowest individual of 10 thickness value)	-
5,3.1, Table1,iii) Type I / II / III / IV / V / VI / VII Method A of IS 13162 (Part 3) (Lowest individual of 10 thickness value)	-
5,3.1, Table 2,v) d) Type I / II / III / IV / V / VI Annex B (Tensile properties: Breaking elongation)	-
5,3.1, Table1,iv) d) Type I / II / III / IV / V / VI / VII Annex B (Tensile properties: Breaking elongation)	-
3, 3.1 (MATERIAL AND MANUFACTURE)	-
3, 3.2 (MATERIAL AND MANUFACTURE If two or more pieces of geomembranes are used, the material shall be joined together by a suitable heat sealing process keeping an overlap of at least 2.5 cm. )	-
4, 4.1 (VARIETY AND TYPES : Based on the finish, HDPE geomembrane shall be of following varieties)	-
4.2,4.2.1 (Based on the thickness of HDPE geomembrane, the material shall be classified as under)	-
4.2,4.2.2 (Based on the thickness of HDPE geomembrane, the material shall be classified as under)	-
5,3.1, Table1,i) a) Type I / II / III / IV / V / VI / VII IS 7016 (Part 1) (Length)	-
5,3.1, Table 2,i) b) Type I / II / III / IV / V / VI IS 7016 (Part 1) (width)	-
5,3.1, Table1,ii) Type I / II / III / IV / V / VI / VII Method A of IS 13162 (Part 3) (Average thickness at a pressure of 2 ± 0.01 kPa)	-
5,3.1, Table1,iv) a) Type I / II / III / IV / V / VI / VII Annex B (Tensile properties: Yield strength,)	-
5,3.1, Table1,iv) b) Type I / II / III / IV / V / VI / VII Annex B (Tensile properties: Breaking strength,)	-
5,3.1, Table1,iv) c) Type I / II / III / IV / V / VI / VII Annex B (Tensile properties: Yield elongation)	-
5,3.1, Table1,v) Type I / II / III / IV / V / VI / VII Annex C (Tear resistance)	-
5,3.1, Table1,vi) Type I / II / III / IV / V / VI / VII Annex D (Puncture resistanc)	-
5,3.1, Table1,vii) Type I / II / III / IV / V / VI / VII Annex E (Low temperature crack resistance at minus 30°C±1°C)	-
5,3.1, Table1,viii) Type I / II / III / IV / V / VI / VII Annex F (Hydrostatic resistance)	-
5,3.1, Table1,ix) Type I / II / III / IV / V / VI / VII Annex G (Seam strength : 85 percent of the original actual fabric strength or unbreakable seam)	-
5,3.1, Table1,xi) Type I / II / III / IV / V / VI / VII IS 2530 (Carbon black dispersion)	-
5,3.1, Table1,xiv) Type I / II / III / IV / V / VI / VII Annex H (Retention of breaking strength after UV exposure of 144 h : 85 percent of the original actual fabric strength)	-
7, 7.1 Annex M (COLOUR, SURFACE CHARACTERISTICS AND FREEDOM FROM DEFECTS: )	-
7, 7.2 (COLOUR, SURFACE CHARACTERISTICS AND FREEDOM FROM DEFECTS)	-

Partial

Except Oxidative induction time (OIT) and STRESS CRACK RESISTANCE

IS 16654 (2017)

Geosynthetics - Polyprophylene multifilament woven geobags for coastal and waterways protection - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 4.1.1 Table 1 B (ii) (Apperent opening size)	-
Cl 4.1.1 Table 1 A (i) (a) (Tensile strength, Machine Direction)	-
Cl 4.1.1 Table 1 A (ii) (a) (Elongation at designed tensile strength, Machine Direction)	-
Cl 4.1.1 Table 1 A (iii) (Seam strength)	-
Cl 4.1.1 Table 1 A (iv) (a) (Abrasion resistance, Machine Direction)	-
Cl 4.1.1 Table 1 A (v) (a) (Trapezodial tear strength, Machine Direction)	-
Cl 4.1.1 Table 1 A (vi) (Puncture resistance)	-
Cl 4.1.1 Table 1 B (i) (Water permeability)	-
Cl 4.1.1 Table 1 C (i) (Mass)	-
Cl 4.1.1 Table 1 C (ii) (a) (Length of geobag, Small size)	-
Cl 4.1.1 Table 1 C (iii) (a) (Width of geobag, small size)	-
Cl 4.1.1 Table 1 C (iv) (a) (Mass of sand filled geobag, small size)	-
Cl 4.1.1 Table 1 A (i) (b) (Tensile strength, Cross Machine Direction)	-
Cl 4.1.1 Table 1 A (ii) (b) (Elongation at designed tensile strength, Cross Machine Direction)	-
Cl 4.1.1 Table 1 A (iv) (b) (Abrasion resistance, Cross Machine Direction)	-
Cl 4.1.1 Table 1 A (v) (b) (Trapezodial tear strength, Cross Machine Direction)	-
Cl 5 (Marking)	-
4.3 (Prefabrication of Geobags)	-

Partial

Except UV resistance weather condition.

IS 18161 (2023)

Textiles Light weight jute sacking bags for packing 50 kg mustard seed niger seed and ragi Specification

All

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Manufacture)	-
4.1.1 (Manufacture)	-
4.2 (Seam)	-
4.3 (Safety Stitch)	-
4.5 & 8.4.1 Annex- B (Freedom from Defects)	-
4.1 & 5.1, Table 1, i (Dimensions)	-
4.1 & 5.1, Table 1, i (Dimensions)	-
4.1 & 5.1, Table 1, i (Dimensions)	-
4.1 & 5.1, Table 1, iii (Dimensions)	-
4.1 & 5.1, Table 1, iv (Dimensions)	-
4.1 & 5.1, Table 1, v (Average Breaking strength)	-
4.1 & 5.1, Table 1, v (Average Breaking strength)	-
4.1 & 5.1, Table 1, vi (Average Breaking strength)	-
4.1 & 5.1, Table 1, vii (Moisture Regain, % IS 9113 (Cl.8.2))	-
4.1.1 & 5.1, Table 1, ii (Ends/dm)	-

Partial

IS 18163 (2023)

Textiles Light weight jute sacking bags for packing 35 kg groundnut with shell Specification

All

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Manufacture)	-
4.1.1 (Manufacture)	-
4.2 (Seam)	-
4.3 (Safety Stitch)	-
4.4 (Hemming at the Mouth)	-
4.5 & 8.4.1 Annex- B (Freedom from Defects)	-
4.1 & 5.1, Table 1, i (Dimensions)	-
4.1 & 5.1, Table 1, i (Dimensions)	-
4.1 & 5.1, Table 1, i (Dimensions)	-
4.1 & 5.1, Table 1, iii (Dimensions)	-
4.1 & 5.1, Table 1, iv (Dimensions)	-
4.1 & 5.1, Table 1, v (Average Breaking strength)	-
4.1 & 5.1, Table 1, v (Average Breaking strength)	-
4.1 & 5.1, Table 1, vi (Average Breaking strength)	-
4.1 & 5.1, Table 1, vii (Moisture Regain, IS 9113 (Cl.8.2))	-

Partial

IS 18162 (2023)

Textiles Light weight jute sacking bags for packing 50 kg pulses and soyabean Specification

All

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Manufacture)	-
4.1.1 (Manufacture)	-
4.2 (Seam)	-
4.3 (Safety Stitch)	-
4.4 (Hemming at the Mouth)	-
4.5 & 8.4.1 Annex- B (Freedom from Defects)	-
4.1 & 5.1, Table 1, i (Dimensions)	-
4.1 & 5.1, Table 1, i (Dimensions)	-
4.1 & 5.1, Table 1, i (Dimensions)	-
4.1 & 5.1, Table 1, iii (Dimensions)	-
4.1 & 5.1, Table 1, v (Average Breaking strength)	-
4.1 & 5.1, Table 1, v (Average Breaking strength)	-
4.1 & 5.1, Table 1, vi (Average Breaking strength)	-
4.1 & 5.1, Table 1, vii (Moisture Regain, % IS 9113 (Cl.8.2))	-
5.1, Table 1, v (Average breaking load of sacking (ravelled strip method, 10.0 cm × 20.0 cm), Min, N (kgf) Weftway:)	-

Partial

IS 16186 (2014)

Textiles - Light weight jute sacking bags for packing 50 kg foodgrains - Specification

Rs.8150.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Manufacture- IS16186)	-
4.1 (Fabric)	-
4.1 (i)The bags shall be made from single piece of 2/1 twill weave jute sacking of uniform construction with warp running along the length of the bag. )	-
4.1 (ii) The mass per square meter of sacking used in the fabric of the bag 504 g.)	-
4.2 (Seam-IS 9113 (Cl.5.1.2))	-
4.2.i) ( Type of stitches Herakle )	-
4.2.ii) ( Jute twine for stitches Two strands of 3-ply )	-
4.2.iii) ( Stitches/dm 10 ± 1 )	-
4.2.iv) (Tex of jute twine [ IS 9113 (Cl.5.1.2) ] 310 tex.X 3-ply )	-
4.3 (Union Safety Stitch-IS 9113 (Cl.5.1.2))	-
4.3.i) ( Stitches/dm 10 ± 1 )	-
4.3.ii) (Tex of jute twine )	-
4.3 ( 310 tex.X 2-ply )	-
4.4 (Hemming at the mouth-IS 9113 (Cl.5.1.2))	-
4.4 (Fabric shall be hemmed with jute yarn of 310 tex )	-
4.5 (Freedom from defects)	-
4.5, Annex A (GAW)	-
4.5, Annex A (Multiple broken/missing warp(end)-Two or more contiguous, regardless of length )	-
4.5, Annex A (Multiple broken weft(pick))	-
4.5, Annex A (Cut, hole, tear or patch-Two or more warp thread ruptured at adjoining points )	-
4.5, Annex A (Float-Fabric where warp and weft yarns escape)	-
4.5, Annex A (Gap stitching-Stitching missing)	-
4.5, Annex A (Mildew-Staining of fabric due to fungal or bacterial growth visible to naked eye)	-
4.1 & 5.1, Table 1 (Dimension-IS 9113 (Cl.8.3.2))	-
4.1 & 5.1, Table 1 (Outside Length, cm )	-
4.1 & 5.1, Table 1 (Outside Width, cm )	-
4.1 & 5.1, Table 1 (Ends /dm-IS 9113 (Cl.8.4.2))	-
4.1 & 5.1, Table 1 (Picks/dm-IS 9113 (Cl.8.4.2))	-
4.1 & 5.1, Table 1 (Corrected Mass/Bag,g-IS 9113 (Cl.8.5.2))	-
4.1 & 5.1, Table 1 (Average Breaking Strength in N)	-
4.1 & 5.1, Table 1 (Warpway -IS 9113 (Cl.8.6.2))	-
4.1 & 5.1, Table 1 (Weftway-IS 9113 (Cl.8.6.2))	-
4.1 & 5.1, Table 1 (Average Seam Strength in N-IS 9113 (Cl.8.7))	-
4.1 & 5.1, Table 1 (Moisture Regain, Percent-IS 9113 (Cl.8.2))	-

Partial

IS 16581 (2018)

High density polyethylene (HDPE)/polypropylene (PP) woven sacks for packing of solid ammonium nitrate for explosives - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 Table 1 (ii) (Ends per dm)	-
5.1 Table 1 (iii) (Picks per dm)	-
5.1 Table 1 (iv) (Mass of fabric, g/m2)	-
5.1 Table 1 (i) (Dimensions, mm)	-
5.1 Table 1 (vi) (Minimum breaking strength of bottom seam (Strip method), N²) (kgf), Min)	-
5.1 Table 1 (vii) (Elongation at break of fabric (Raveled strip method), percent :)	-
6 (PRINTING, PACKING AND MARKING)	-

Partial

complete test facility

IS 9755 (2021)

Textiles - High Density Polyethylene (HDPE) / Polypropylene (pp) Woven Sacks for Packing Fertilizers

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Raw Meterial)	-
4.2 ("Fabric a) Width of Tape")	-
4.2 ("Fabric b) Linear Density")	-
4.2 ("Fabric c) Mesh")	-
4.2 ("Fabric c) Mesh")	-
4.2 ("Fabric d) Unlaminated Fabric Mass")	-
4.3 (Sacks)	-
4.4.1 (Loose Liner)	-
4.4.1 (Thickness of Linear)	-
4.4.2 (Visual Observation)	-
4.4.3 (Bottom Seam of Loose Liner)	-
4.5 (Mass of The Lamination)	-
4.5 (Laminated Fabric)	-
4.5 (Lamination Over Hang of the fabric after trimming)	-
4.6.1 (Distance between the Two Row of Stitches)	-
4.6.1 (Distance of outer stitch from the edge of the bag)	-
4.6.1 (Depth of the Stitch( Double fold))	-
4.6.1 (No.of Stitches/dm)	-
4.6.2 (Breaking Load of the stitching material Non UV Stabilized sack)	-
4.6.2 (Breaking Load for UV Stabilized sack)	-
4.7 (Mouth of the Sack)	-
"Table 1 of Cl. No.5.1 Sl. No. i" ("Dimension a) Inside Length Type 1 & Type 2 ")	-
"Table 1 of Cl. No.5.1 Sl. No. i" ("Dimension b) Inside Width ")	-
"Table 1 of Cl. No.5.1 Sl. No. ii" (Ends/dm ( Type 1 & Type 2))	-
"Table 1 of Cl. No.5.1 Sl. No. iii" (Picks /dm ( Type 1 & Type 2))	-
"Table 1 of Cl. No.5.3 Sl. No. iv" ("Mass of Fabric a) Unlaminated Sack( Type 1 & Type 2)")	-
"Table 1 of Cl. No.5.3 Sl. No. iv" ("Mass of Fabric b) Laminated Sack( Type 1 & Type 2)")	-
"Table 1 of Cl. No.5.3 Sl. No. v" (Mass of Sack( Type 1 & Type 2))	-
"Table 1 of Cl. No.5.4 Sl. No. vi" (Avg. Breaking Strength Of fabric (Ravelled strip method)( 325mm X 25 mm))	-
"Table 1 of Cl. No.5.4 Sl. No. vii" (Breaking Strength of Bottom Seam (Ravelled strip method))	-
"Table 1 of Cl. No.5.1 Sl. No. viii" ("Elongation at Break of fabric a)Length(Type 1 & Type 2)")	-
"Table 1 of Cl. No.5.1 Sl. No. viii" ("Elongation at Break of fabric b) Width(Type 1 & Type 2)")	-
"Table 1 of Cl. No.5.5 Sl. No. ix" ("Ash Content a) For UV Stabilized Sack")	-
"Table 1 of Cl. No.5.5 Sl. No. ix" ("Ash Content b) For Non- UV Stabilized Sack")	-
Cl. No.5.7 (UV Resistance)	-
Cl. No.5.2 (Visual Observation)	-
Cl. No.5.3 (Mass of Bale)	-
Cl. No.6.1 (Printing on Sacks)	-
Cl. No.6.2. (Packaging)	-
Cl. No.6.3. (Marking on the Bale)	-
Cl. No.6.4. (BIS Certification Marking)	-
Cl. No.6.5. (Storage)	-

Partial

Except raw material testing, Drop test and limited test facility for UV exposure.

IS 14252 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sack for filling sand – Specification (second revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Raw Material)	-
3.2 (Tapes – Width )	-
3.2 (Tapes – Linear Density )	-
3.3 (Tying Cord)	-
3.3 (Tying Cord)	-
3.3 (Tying Cord)	-
3.4 (Sack)	-
3.4.1 (Seam)	-
3.4.1 (Seam)	-
3.4.1 (Seam)	-
3.4.1 (Seam)	-
4.1 and Table 1 i a (Dimensions Outside Length)	-
4.1 and Table 1 i b (Dimensions Outside Width)	-
4.1 and Table 1 ii (Ends per dm )	-
4.1 and Table 1 iii (Picks per dm )	-
4.2 and Table 1 iv (Mass of sack )	-
4.1 and Table 1 v a (Average breaking strength of fabric Warpway )	-
4.1 and Table 1 v b (Average breaking strength of fabric Weftway )	-
4.1 and Table 1 vi (Average Breaking strength of bottom seam )	-
4.1 and Table 1 vii a (Elongation at break of fabric Lengthwise)	-
4.1 and Table 1 vii b (Elongation at break of fabric Widthwise )	-
4.1 and Table 1 viii (Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-
4.1 and Table 1 ix (Ash content )	-

Partial

Limited test facility for long term test (UV ageing), Monthly capacity for long term test is only 4 samples.

IS 16208 (2015)

Textiles - High density polyethylene (HDPE)/polypropylene (PP) woven sacks for packaging 10 kg, 15 kg, 20 kg, 25 kg and 30 kg foodgrains - Specification

Rs.19750/- (including all parameters), Rs.10450/- (excl View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (TYPES)	-
4.1 (Raw Material)	-
4.2 (Tapes – Width IS 6192 and IS 11197)	-
4.2 (Tapes – Linear Density )	-
4.2 (Construction)	-
4.3 (Sacks)	-
4.3.1 (Bottom Seam)	-
4.3.1 ( The two rows of stitches shall be separated from each other)	-
4.3.1 ( The stitching shall be done with double fold over seam to a depth )	-
4.3.1 (Stitches pass through a minimum of six layers of the fabric. )	-
4.3.1 (The number of stitches/dm)	-
4.3.2 (Mouth)	-
4.4 and Table 1 i (Capacity)	-
5.2 and Table 1 ii a (Dimensions Inside Length)	-
5.2 and Table 1 ii b (Dimensions Inside Width)	-
5.2 and Table 1 iii (Ends per dm )	-
5.2 and Table 1 iv (Picks per dm )	-
5.1 and Table 1 v (Mass of sack )	-
5.2 and Table 1 vi a (Average breaking strength of fabric Lengthwise )	-
5.2 and Table 1 vi b (Average breaking strength of fabric Widthwise )	-
5.2 and Table 1 vi (Breaking strength of bottom seam )	-
5.2 and Table 1 viii a (Elongation at break of fabric Lengthwise)	-
5.2 and Table 1 viii b (Elongation at break of fabric Widthwise )	-
5.2 and Table 1 ix (Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-
5.2 and Table 1 x (Ash content )	-

Partial

Limited test facility for long term test (UV ageing), Monthly capacity for long term test is only 4 samples.

IS 16703 (2017)

Textiles - High density polyethylene (HDPE) polypropylene (PP) woven sacks for packaging of 25 kg polymer materials - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (Mass of Bale)	-
5.2 Table 1 (Dimensions)	-
5.2 Table 1 (Dimensions)	-
5.2 Table 1 (Dimensions)	-
5.2 Table 1 (Dimensions)	-
5.2 Table 1 (Ends per dm)	-
5.2 Table 1 (Picks per dm)	-
5.2 Table 1 (Mass of sack, Gusseted type, g - IS 1964)	-
5.2 Table 1 (Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N) (kgf): - IS 1969 (Part 1))	-
5.2 Table 1 (Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N2) (kgf): - IS 1969 (Part 1))	-
5.2 Table 1 (Breaking strength of bottom seam (Ravelled strip method), Min, N) (kgf) - IS 9030)	-
5.2 Table 1 (Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-
5.2 Table 1 (Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,a) For UV stabilized sacks)	-
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,b) For non- UV stabilized sacks)	-
4.6 (Capacity)	-
4.3.1 (Bottom Seam)	-
4.3 (Sacks)	-
4.2,5.1,5.2,5.3,5.4 (Breaking strenght after U.V. Exposure (Warp/Weft))	-
4.2,5.1,5.2,5.3,5.4, (UV Resistance (192 hrs)(100 x 65+92x40))	-
4.2 (Linear Density)	-
4.2 (Width of tape)	-

Partial

Drop impact strength facility not available .

IS 11652 (2017)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg cement – Specification (third revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-
4.5 (and the remaining overhang shall not be more than 5 mm after trimming.)	-
4.1 (Raw Material )	-
4.2 (Fabric)	-
4.2 (Linear Density, 900 denier)	-
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-
4.3 (Sacks)	-
4.4 (Seam )	-
4.4 (Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-
4.4 (Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-
4.4 (Seam The stitching shall be done with double fold over seam to)	-
4.4 (to a depth of minimum 25 mm, so that so that)	-
4.4 (that the stitches pass through a minimum of six layers of the fabric.)	-
4.4 (The number of stitches/dm shall be 14 ± 2.)	-
4.4 (The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-
4.4 (Seam)	-
4.5 (Lamination )	-
4.5 (Lamination )	-
4.5 (Lamination )	-
4.6 (Capacity The sack shall have the nominal filling capacity of 50 kg)	-
4.7 (There shall be a double fold at the top seam and)	-
4.7 (and then stitching shall be done through six layers.)	-
4.7 (The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-
4.7 (and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-
5/5.1-Table 1-Sr. no. iv (Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-
5/5.1-Table 1-Sr. no. iv (Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-
5/5.3-Table 1-Sr. no.v (Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-
5/5.3-Table 1-Sr. no.v (Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-
5/5.3-Table 1-Sr. no.vi (Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-
5/5.3-Table 1-Sr. no.vi (Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-
5/5.3-Table 1-Sr. no.vii (Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-
5/5.3-Table 1-Sr. no.vii (Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-
5/5.5-Table 1-Sr. no.viii (Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-
5/5.5-Table 1-Sr. no.viii (Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-

Partial

Drop impact strength test facility not available

IS 16653 (2017)

Geosynthetics â€“ Needle punched nonwoven geobags for coastal and waterways protection â€“ Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 4.1.1 Table 1 A (iii) (Seam strength, percentage of actual fabric strength)	-
Cl 4.1.1 Table 1 A (vi) (CBR Puncture resistance (N))	-
Cl 4.1.1 Table 1 A (i) (a) (Wide with tensile strength , Machine direction)	-
Cl 4.1.1 Table 1 A (ii) (a) (Elongation, Machine Direction)	-
Cl 4.1.1 Table 1 A (iv) (Abrasion Resistance)	-
Cl 4.1.1 Table 1 A (v) (a) (Trapezoidal tear strength, Machine Direction)	-
Cl 4.1.1 Table 1 B (i) (Permittivity)	-
Cl 4.1.1 Table 1 B (ii) (Water permittivity)	-
Cl 4.1.1 Table 1 B (iii) (Apparent opening size)	-
Cl 4.1.1 Table 1 C (i) (Thickness at 2kpa)	-
Cl 4.1.1 Table 1 C (ii) (Polymer types)	-
Cl 4.1.1 Table 1 C (iii) (Mass)	-
Cl 4.1.1 Table 1 C (iv) (a) (Length of geobag, Small size)	-
Cl 4.1.1 Table 1 C (v) (a) (Width of geobag, small size)	-
Cl 4.1.1 Table 1 C (vi) (a) (Mass of sand filled geobag, small size)	-
Cl 4.1.1 Table 1 C (iv) (b) (Length of geobag, large size)	-
Cl 4.1.1 Table 1 C (v) (a) (Width of geobag, small size)	-
Cl 4.1.1 Table 1 C (vi) (b) (Mass of sand filled geobag, large size)	-
Cl 5 (Marking)	-
Cl 4.3 (Prefabrication of Geobags)	-

Partial

Long term test facility not available

IS 16391 (2015)

Geosynthetics â€“ Geotextiles used in sub-grade separation in pavement structures â€“ Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 4.3 Table 1 (i) (a) (Type of geotextile)	-
Cl 4.3 Table 1 (i) (b) (Roll length, m, Min)	-
Cl 4.3 Table 1 (i) (c) (Roll width, m)	-
Cl 4.3 Table 1 (i) (d) (Grab strength, N)	-
Cl 4.3 Table 1 (i) (e) (Sewn seam strength, N)	-
Cl 4.3 Table 1 (i) (f) (Trapezidal tear strength, N)	-
Cl 4.3 Table 1 (i) (g) (CBR puncture strength, N)	-
Cl 4.3 Table 1 (ii) (a) (Permitttivity, s-1)	-
Cl 4.3 Table 1 (ii) (b) (Apparent opening size (AOS), mm)	-
4.2, Amd-1 (Carbon Black Content)	-
4.2 (Carbon black and carbon black dispersion)	-
6 (Marking)	-

Partial

Partial test facility only

IS 15351 (2015)

Agro textiles – Laminated high density polyethylene (HDPE) woven geomembrane for water proof lining – Specification (second revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (HDPE Tapes)	-
3.2 (HDPE Fabric)	-
5 (MANUFACTURE)	-
5.1 (Lamination)	-
5.2 (Panel Width)	-
5.3 (Joints/Seams)	-
5.1.1 and 6.2 (Thickness, mm- IS 7016: Part 1)	-
5.1.1 and 6.2 (Mass, g/sq m)	-
5.1.1 and 6.2 (Dimensions, mm- Annexure A of IS 11652)	-
5.1.1 and 6.2 (Length)	-
5.1.1 and 6.2 (Width)	-
5.1.1 and 6.2 (Carbon black content, Percent- IS 2530)	-
5.1.1 and 6.2 (Breaking Load on 20 cm X 10 cm Strip, Min )	-
5.1.1 and 6.2 (Before UV exposure IS 13162 (Part 5)	-
5.1.1 and 6.2 (Strain at Maximum load, Percent-IS 13162 (Part 5)	-
5.1.1 and 6.2 (Impact failure load, at 1524 mm drop,)	-
5.1.1 and 6.2 (Tear resistance, N, Min-Method A1 of IS 7016 (Part 3))	-
5.1.1 and 6.2 (Puncture resistance, N, Min-Annex D)	-
5.1.1 and 6.2 (Bursting strength (Ball burst),N/cm², Min-)	-
5.1.1 and 6.2 (Seam strength before UV exposure (N/mm), Min-IS 15060)	-
5.1.1 and 6.2 (Hydrostatic resistance-Annex E)	-
5.1.1 and 6.2 (Ash content, percent, Max-Annex F)	-

Partial

No facility for long term tests and raw material test.

Bureau of Indian Standards

The National Standards Body of India

BIS, Hyderabad Branch Laboratory (HYBL)

Bureau of Indian Standards, Hyderabad Branch Laboratory, Plot no 1, Sy no 367/1, Moula ali, Hyderabad -500 040, Hyderabad, Hyderabad, Telangana, 500040

8096000013 hybl@bis.gov.in

Scope List