BIS - LIMS (Laboratory Information Management System)

BIS, Hyderabad Branch Laboratory (HYBL)

Bureau of Indian Standards, Hyderabad Branch Laboratory, Plot no 1, Sy no 367/1, Moula ali, Hyderabad -500 040, Hyderabad, Hyderabad, Telangana, 500040

8096000013 hybl@bis.gov.in

Scope List

Reset

63 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 15351 (2015)

Agro textiles – Laminated high density polyethylene (HDPE) woven geomembrane for water proof lining – Specification (second revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (HDPE Tapes)	-
3.2 (HDPE Fabric)	-
5 (MANUFACTURE)	-
5.1 (Lamination)	-
5.2 (Panel Width)	-
5.3 (Joints/Seams)	-
5.1.1 and 6.2 (Thickness, mm- IS 7016: Part 1)	-
5.1.1 and 6.2 (Mass, g/sq m)	-
5.1.1 and 6.2 (Dimensions, mm- Annexure A of IS 11652)	-
5.1.1 and 6.2 (Length)	-
5.1.1 and 6.2 (Width)	-
5.1.1 and 6.2 (Carbon black content, Percent- IS 2530)	-
5.1.1 and 6.2 (Breaking Load on 20 cm X 10 cm Strip, Min )	-
5.1.1 and 6.2 (Before UV exposure IS 13162 (Part 5)	-
5.1.1 and 6.2 (Strain at Maximum load, Percent-IS 13162 (Part 5)	-
5.1.1 and 6.2 (Impact failure load, at 1524 mm drop,)	-
5.1.1 and 6.2 (Tear resistance, N, Min-Method A1 of IS 7016 (Part 3))	-
5.1.1 and 6.2 (Puncture resistance, N, Min-Annex D)	-
5.1.1 and 6.2 (Bursting strength (Ball burst),N/cm², Min-)	-
5.1.1 and 6.2 (Seam strength before UV exposure (N/mm), Min-IS 15060)	-
5.1.1 and 6.2 (Hydrostatic resistance-Annex E)	-
5.1.1 and 6.2 (Ash content, percent, Max-Annex F)	-

-
except long term tests.

IS 14887 (2014)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2 (Tapes – Width and Thickness ( IS 6192/IS 11197))	-
3.2 (Tapes – Linear Density (IS 6192/IS 11197))	-
3.3.1 (Bottom seam (IS 10789))	-
4.1 and 3.4 (Mass of bale (Cl. 4.1), Capacity (Cl 3.4))	-
4.2 and Table 1 ii (Dimensions )	-
5.2 and Table 1 iii (Ends per dm )	-
5.2 and Table 1 iv (Picks per dm )	-
4.2 and Table 1 v (Mass of sack )	-
4.2 and Table 1 vi (Average breaking strength of fabric )	-
4.2 and Table 1 vi (Breaking strength of bottom seam )	-
4.2 and Table 1 viii (Elongation at break of fabric )	-
4.2 and Table 1 ix (Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-
4.2 and Table 1 x (Ash content )	-

-
Complete test facility

IS 14968 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing 50 Kg/25 kg sugar – Specification (first revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (TYPES)	-
4.1 (Raw Material)	-
4.2 (Tapes – Width IS 6192 and IS 11197)	-
4.2 (Tapes – Linear Density )	-
4.3 (Sacks)	-
4.3.1 (Bottom Seam)	-
4.3.1 (The two rows of stitches shall be separated from each other)	-
4.3.1 ( The outer stitch)	-
4.3.1 ( The stitching shall be done with double fold over seam to a depth )	-
4.3.1 (Stitches pass through a minimum of six layers of the fabric. )	-
4.3.1 (stitches/dm)	-
4.3.2 (Mouth)	-
4.4 (Liner IS 10146 or IS 10910.)	-
4.4 (Mass of the loose liner )	-
4.4 (Width of the loose liner)	-
4.4 (Length of the line)	-
4.4 (Bottom seam of the loose liner)	-
4.4.1 (Liner)	-
4.5 and Table 1 i (Capacity)	-
5.2 and Table 1 ii a (Dimensions Inside Length)	-
5.2 and Table 1 ii b (Dimensions Inside Width)	-
5.2 and Table 1 iii (Ends per dm )	-
5.2 and Table 1 iv (Picks per dm )	-
5.1 and Table 1 v a (Mass of unlaminated sack IS 1964)	-
5.1 and Table 1 v b (Mass of unlaminated sack with liner )	-
5.2 and Table 1 vi a (Average breaking strength of fabric Lengthwise IS 1969 (Part 1))	-
5.2 and Table 1 vi b (Average breaking strength of fabric Widthwise IS 1969 (Part 1))	-
5.2 and Table 1 vi (Breaking strength of bottom seam IS 9030 )	-
5.2 and Table 1 viii a (Elongation at break of fabric Lengthwise IS 1969 (Part 1))	-
5.2 and Table 1 viii b (Elongation at break of fabric Widthwise IS 1969 (Part 1))	-
5.2 and Table 1 ix (Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-
5.2 and Table 1 x (Ash content )	-

-
Complete test facility

Bureau of Indian Standards

The National Standards Body of India

BIS, Hyderabad Branch Laboratory (HYBL)

Bureau of Indian Standards, Hyderabad Branch Laboratory, Plot no 1, Sy no 367/1, Moula ali, Hyderabad -500 040, Hyderabad, Hyderabad, Telangana, 500040

8096000013 hybl@bis.gov.in

Scope List