BIS - LIMS (Laboratory Information Management System)

Bharat Test House Pvt Ltd 1474 Haryana

1474, HSIIDC Rai Industrial Estate, SONIPAT, Sonipat, Haryana, 131029

9310314585 bthrai@bharattesthouse.com

Scope List

Reset

101 Results

S.No.

Indian Standard No.

Product

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 16614 : Part 2 (2022)

Double-Capped LED Linear Lamps Part 2 Performance Specification

98500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Requirements on Tests)	-	0	-
5(Marking)	-	250	5% discount for BIS
6(Dimensions)	-	750	5% discount for BIS
7.1(General Test Conditions)	-	0	-
7.2(Creation of LED Lamp Families to reduce test effort)	-	0	-
8.1(Lamp Power)	-	1000	5% discount for BIS
8.2(Power Factor)	-	1000	5% discount for BIS
8.3(Harmonics)	-	5000	5% discount for BIS
8.4(Emission of Radio Frequency Disturbances)	-	5000	5% discount for BIS
9.1(Luminous Flux)	-	5000	5% discount for BIS
9.2(Luminous intensity distribution, peak intensity and beam angle)	-	2000	5% discount for BIS
9.3(Luminous Efficacy)	-	5000	5% discount for BIS
10(COLORIMETRIC CHARACTERISTICS)	-	2000	5% discount for BIS
11(Lamp Life)	-	67500	5% discount for BIS
12(Dimming)	-	0	-
14.1(Type Tests)	-	0	-
14.2(Acceptance Tests)	-	0	-

Complete

19 Mar, 2023

IS 16270 (2023)

Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

575000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Photovoltaic Energy System)	-	0	-
Cl-4.2(Secondary Cells and Batteries)	-	0	-
Cl-4.3(General Operating Conditions)	-	0	-
Cl-4.3.8(Storage)	-	0	-
Cl-4.3.9(Operating Temperature)	-	0	-
Cl-5.1(Mechanical Endurance)	-	0	-
Cl-5.2(Charge Efficiency)	-	0	-
Cl-5.3(Deep Discharge Protection)	-	0	-
Cl-5.4(Marking)	-	2500	-
Cl-5.5(Safety)	-	0	-
Cl-5.6(Documentation)	-	0	-
Cl-6(Functional characteristice)	-	0	-
Cl-7(General test conditions)	-	0	-
Cl-8.1(Capacity Test)	-	125000	-
Cl-8.2(Endurance Test)	-	132500	-
Cl-8.3(Charge Retention Test)	-	100000	-
Cl-8.4(Cycle Endurance in Photovoltaic Application (Extreme Conditions))	-	125000	-
Cl-8.5(Sulphation Test (Applicable for Lead Acid Batteries only))	-	42500	-
Cl-8.6(Water Loss Test (Valid for Flooded Lead Acid Batteries only))	-	47500	-
Cl-9.1(Type Tests)	-	0	-
Cl-9.2(Acceptance Test)	-	0	-

Complete

19 Mar, 2023

IS 302 : Part 2 : Sec 7 (2024)

Safety of Household And Similar Electrical Appliances Part 2 Particular Requirements Section 7: Domestic Electric Clothes Washing Machines

195000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(GENERAL REQUIREMENT)	-	1000	5% discount for BIS
6(CLASSIFICATION)	-	1000	5% discount for BIS
7(MARKING AND INSTRUCTIONS)	-	2000	5% discount for BIS
8(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	2500	5% discount for BIS
10(POWER INPUT AND CURRENT)	-	4000	5% discount for BIS
11(HEATING)	-	5000	5% discount for BIS
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	4500	5% discount for BIS
14(TRANSIENT OVERVOLTAGES)	-	5500	5% discount for BIS
15(MOISTURE RESISTANCE)	-	15000	5% discount for BIS
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	5000	5% discount for BIS
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	4000	5% discount for BIS
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	4000	5% discount for BIS
18(ENDURANCE)	-	10000	5% discount for BIS
19(ABNORMAL OPERATION)	-	45000	5% discount for BIS
19.11.4.1(Electrostatic discharges)	-	45000	5% discount for BIS
19.11.4.2(Radiated fields)	-	45000	5% discount for BIS
19.11.4.5(Immunity to conducted discharges)	-	45000	5% discount for BIS
19.11.4.6(Class 3 Voltage dips and interruptions)	-	45000	5% discount for BIS
19.11.4.7(Harmonics)	-	45000	5% discount for BIS
20(STABILITY AND MECHANICAL HAZARDS)	-	30000	5% discount for BIS
21(MECHANICAL STRENGTH)	-	5000	5% discount for BIS
22(CONSTRUCTION)	-	30000	5% discount for BIS
23(INTERNAL WIRING)	-	2500	5% discount for BIS
24(COMPONENTS)	-	2500	5% discount for BIS
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	2500	5% discount for BIS
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	3000	5% discount for BIS
27(PROVISION FOR EARTHING)	-	3000	5% discount for BIS
28(SCREWS AND CONNECTIONS)	-	3000	5% discount for BIS
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	2500	5% discount for BIS
30(RESISTANCE TO HEAT AND FIRE)	-	3000	5% discount for BIS
31(RESISTANCE TO RUSTING)	-	2500	5% discount for BIS
4(GENERAL REQUIREMENT)	-	0	-
6(CLASSIFICATION)	-	0	-
7(MARKING AND INSTRUCTIONS)	-	0	-
8(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	0	-
10(POWER INPUT AND CURRENT)	-	0	-
11(HEATING)	-	0	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	0	-
14(TRANSIENT OVERVOLTAGES)	-	0	-
15(MOISTURE RESISTANCE)	-	0	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	0	-
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	0	-
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	0	-
18(ENDURANCE)	-	0	-
19(ABNORMAL OPERATION)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
20(STABILITY AND MECHANICAL HAZARDS)	-	0	-
21(MECHANICAL STRENGTH)	-	0	-
22(CONSTRUCTION)	-	0	-
23(INTERNAL WIRING)	-	0	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	0	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
27(PROVISION FOR EARTHING)	-	0	-
28(SCREWS AND CONNECTIONS)	-	0	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	0	-
30(RESISTANCE TO HEAT AND FIRE)	-	0	-
31(RESISTANCE TO RUSTING)	-	0	-
19.11.4.3(Fast transient bursts)	-	45000	5% discount for BIS
19.11.4.4(Surge immunity test)	-	45000	5% discount for BIS
19.13(ABNORMAL OPERATION)	-	45000	5% discount for BIS
19.101(Abnormal Operation)	-	45000	5% discount for BIS
19.102(Abnormal Operation)	-	45000	5% discount for BIS

Complete

19 Mar, 2023

IS 15636 (2022)

Automotive vehicles - Pneumatic tyres for commercial vehicles - Diagonal and radial ply

65000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2.2(Technical specification-Declaration)	-	0	-
5(Marking)	-	500	5% discount for BIS
4.1(Tyre dimension- Section Width)	-	2000	5% discount for BIS
4.1(Tyre dimension- Outer diameter)	-	2000	5% discount for BIS
4.1.1(Tread wear Indicator)	-	2000	5% discount for BIS
4.5(Tyre strength (Plunger test))	-	10000	5% discount for BIS
4.2(Endurance test-Change in diameter)	-	35000	5% discount for BIS
4.3(Load & Speed test)	-	15000	5% discount for BIS
Cl. No. 4.1.1.1, Annex A, Table No. 6 to 28(Tyre Dimension_Section Width of Tyre)	-	2000	5% discount for BIS
Cl. No. 4.1.1.2, Annex A, Table No. 6 to 28(Tyre Dimension_Outer Diameter of Tyre)	-	2000	5% discount for BIS
Cl. No. 4.2, Annex B, Table No. 29(Endurance Test)	-	35000	5% discount for BIS
Cl. No. 4.2.5, Annex B, Table No. 29(Second Endurance Test)	-	35000	5% discount for BIS
Cl. No. 4.3, Annex C, Table No. 18(Load/ Speed Performance Test)	-	15000	5% discount for BIS
Cl. No. 4.4, Annex-A(Tread Wear Indicators)	-	2500	5% discount for BIS
Cl. No. 4.5, Annex D, Table No.30 to 33(Tyre Strength Test (Plunger Test)Test)	-	10000	5% discount for BIS
Cl. No. 5.1(a) to (m)(Markings)	-	500	5% discount for BIS
Cl. No. 5.2, Annex E,(Arrangement of Tyre Markings)	-	500	5% discount for BIS
Cl. No. 4.1.1.1, Annex A, Table No. 6 to 28(Tyre Dimension_Section Width of Tyre)	-	2000	5% discount for BIS
Cl. No. 4.1.1.2, Annex A, Table No. 6 to 28(Tyre Dimension_Outer Diameter of Tyre)	-	2000	5% discount for BIS
Cl. No. 4.2, Annex B, Table No. 29(Endurance Test)	-	35000	5% discount for BIS
Cl. No. 4.2.5, Annex B, Table No. 29(Second Endurance Test)	-	35000	5% discount for BIS
Cl. No. 4.3, Annex C, Table No. 18(Load/ Speed Performance Test)	-	15000	5% discount for BIS
Cl. No. 4.4, Annex-A(Tread Wear Indicators)	-	2500	5% discount for BIS
Cl. No. 4.5, Annex D, Table No.30 to 33(Tyre Strength Test (Plunger Test)Test)	-	10000	5% discount for BIS
Cl. No. 5.1(a) to (m)(Markings)	-	500	5% discount for BIS
Cl. No. 5.2, Annex E,(Arrangement of Tyre Markings)	-	500	5% discount for BIS

Complete

19 Mar, 2023

IS 15633 (2022)

Automotive vehicles - pneumatic tyres for passenger car vehicles - diagonal and radial ply

70000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2.2,Anx-J(Technical specification-Declaration)	-	0	-
5(Marking)	-	750	5% discount for BIS
4.1(Tyre dimension- Section Width)	-	2000	5% discount for BIS
4.1(Tyre dimension- Outer diameter)	-	2000	5% discount for BIS
4.5(Tread wear Indicator)	-	1250	5% discount for BIS
4.6(Tyre strength (Plunger test))	-	10000	5% discount for BIS
4.3(Endurance test)	-	28500	5% discount for BIS
4.2(Load & Speed test)	-	12500	5% discount for BIS
4.4(Bead Unseating Resistance)	-	15000	5% discount for BIS
Cl. No. 4.1.1.1, Annex A, B Table No. 9 to 15 & 16(Tyre Dimension_Section Width of Tyre)	-	2000	5% discount for BIS
Cl. No. 4.1.1.2, Annex A, B Table No. 9 to 15 & 16(Tyre Dimension_Outer Diameter of Tyre)	-	2000	5% discount for BIS
Cl. No. 4.2, Annex C, Table No. 17(Load/Speed Performance Test)	-	12500	5% discount for BIS
Cl. No. 4.3, Annex D, Table No. 18(Endurance Test)	-	28500	5% discount for BIS
Cl. No. 4.4, Annex E, Table No.19 to 21(Bead Unseating Resistance Test)	-	15000	5% discount for BIS
Cl. No. 4.5, Annex-B(Tread Wear Indicators)	-	1250	5% discount for BIS
Cl. No. 4.6, Annex-F, Table No. 22 to 24(Tyre Strength Test (Plunger Test))	-	10000	5% discount for BIS
Cl. No. 5.1 (a) to 5.1 (n)(Markings)	-	750	5% discount for BIS
Cl. No. 5.4, Annex H,(Arrangement of Tyre Markings)	-	750	5% discount for BIS
Cl. No. 4.1.1.1, Annex A, B Table No. 9 to 15 & 16(Tyre Dimension_Section Width of Tyre)	-	2000	5% discount for BIS
Cl. No. 4.1.1.2, Annex A, B Table No. 9 to 15 & 16(Tyre Dimension_Outer Diameter of Tyre)	-	2000	5% discount for BIS
Cl. No. 4.2, Annex C, Table No. 17(Load/Speed Performance Test)	-	12500	5% discount for BIS
Cl. No. 4.3, Annex D, Table No. 18(Endurance Test)	-	28500	5% discount for BIS
Cl. No. 4.4, Annex E, Table No.19 to 21(Bead Unseating Resistance Test)	-	15000	5% discount for BIS
Cl. No. 4.5, Annex-B(Tread Wear Indicators)	-	1250	5% discount for BIS
Cl. No. 4.6, Annex-F, Table No. 22 to 24(Tyre Strength Test (Plunger Test))	-	10000	5% discount for BIS
Cl. No. 5.1 (a) to 5.1 (n)(Markings)	-	750	5% discount for BIS
Cl. No. 5.4, Annex H,(Arrangement of Tyre Markings)	-	750	5% discount for BIS

Complete

19 Mar, 2023

IS 15627 (2022)

Automotive Vehicles - Pneumatic Tyres for Two and Three - Wheeled Motor Vehicles - Specification First Revision

65000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No. 4.1.1.1, Annex D, Table No. 5(a), 5(b), 6(a), 6(b), 7 to 12(Tyre Dimension_Section Width of Tyre)	-	2000	5% discount for BIS
Cl. No. 4.1.1.2, Annex D, Table No. 5(a), 5(b), 6(a), 6(b), 7 to 12(Tyre Dimension_Outer Diameter of Tyre)	-	2000	5% discount for BIS
Cl. No. 4.2 & E-1.2, Annex E, Table No. 13(Load/Speed Performance Test)	-	12500	5% discount for BIS
Cl. No. 4.3 & F-3.4, Annex F, Table No. 14(Dynamic Growth of Tyres)	-	12500	5% discount for BIS
Cl. No. 4.4, G-1, G-6.1 and G-6.3, Annex G, Table No.15 to 17(Tyre Strengtrh Test (Plunger Test))	-	10000	5% discount for BIS
Cl. No. 4.5, H-4 & E-1.2 Annex H, Table No. 18(Endurance Test)	-	25000	5% discount for BIS
Cl. No. 4.6,Annex-D(Tread Wear Indicators)	-	1500	5% discount for BIS
Cl. No. 5.1(a) to 5.1 (u)(Markings)	-	1500	5% discount for BIS
Cl. No. 5.2, Annex H, Table No. 19 & 20(Arrangement of Tyre Markings)	-	1500	5% discount for BIS
Cl. No. 5.2, Annex H, Table No. 19 & 20(Arrangement of Tyre Markings)	-	1500	5% discount for BIS
6.6.2,Anx-K(Technical specification-Declaration)	-	0	-
5(Marking)	-	1500	5% discount for BIS
4.1(Tyre dimension- Section Width)	-	2000	5% discount for BIS
4.1(Tyre dimension- Outer diameter)	-	2000	5% discount for BIS
4.6(Tread wear Indicator)	-	1500	5% discount for BIS
4.4(Tyre strength (Plunger test))	-	10000	5% discount for BIS
4.5(Endurance test)	-	25000	5% discount for BIS
4.2(Load & Speed test)	-	12500	5% discount for BIS
4.3(Dynamic growth of tyre)	-	12500	5% discount for BIS
5(Marking)	-	1500	5% discount for BIS
4.1(Tyre Dimensions)	-	2000	5% discount for BIS
4.2(Load/Speed Performance Test)	-	2000	5% discount for BIS
4.3(Dynamic Growth of Tyres)	-	12500	5% discount for BIS
4.4(Tyre Strength Test (Plunger Test))	-	10000	5% discount for BIS
4.5(Endurance Test)	-	25000	5% discount for BIS
4.6(Tread wear Indicators)	-	1500	5% discount for BIS
Cl. No. 4.1.1.1, Annex D, Table No. 5(a), 5(b), 6(a), 6(b), 7 to 12(Tyre Dimension_Section Width of Tyre)	-	12500	5% discount for BIS
Cl. No. 4.1.1.2, Annex D, Table No. 5(a), 5(b), 6(a), 6(b), 7 to 12(Tyre Dimension_Outer Diameter of Tyre)	-	12500	5% discount for BIS
Cl. No. 4.2 & E-1.2, Annex E, Table No. 13(Load/Speed Performance Test)	-	12500	5% discount for BIS
Cl. No. 4.3 & F-3.4, Annex F, Table No. 14(Dynamic Growth of Tyres)	-	12500	5% discount for BIS
Cl. No. 4.4, G-1, G-6.1 and G-6.3, Annex G, Table No.15 to 17(Tyre Strengtrh Test (Plunger Test))	-	10000	5% discount for BIS
Cl. No. 4.5, H-4 & E-1.2 Annex H, Table No. 18(Endurance Test)	-	25000	5% discount for BIS
Cl. No. 4.6,Annex-D(Tread Wear Indicators)	-	1500	5% discount for BIS
Cl. No. 5.1(a) to 5.1 (u)(Markings)	-	1500	5% discount for BIS
Cl. No. 5.2, Annex H, Table No. 19 & 20(Arrangement of Tyre Markings)	-	1500	5% discount for BIS
Cl. No. 4.1.1.1, Annex D, Table No. 5(a), 5(b), 6(a), 6(b), 7 to 12(Tyre Dimension_Section Width of Tyre)	-	2000	5% discount for BIS
Cl. No. 4.1.1.2, Annex D, Table No. 5(a), 5(b), 6(a), 6(b), 7 to 12(Tyre Dimension_Outer Diameter of Tyre)	-	2000	5% discount for BIS
Cl. No. 4.2 & E-1.2, Annex E, Table No. 13(Load/Speed Performance Test)	-	12500	5% discount for BIS
Cl. No. 4.3 & F-3.4, Annex F, Table No. 14(Dynamic Growth of Tyres)	-	12500	5% discount for BIS
Cl. No. 4.4, G-1, G-6.1 and G-6.3, Annex G, Table No.15 to 17(Tyre Strengtrh Test (Plunger Test))	-	10000	5% discount for BIS
Cl. No. 4.5, H-4 & E-1.2 Annex H, Table No. 18(Endurance Test)	-	25000	5% discount for BIS
Cl. No. 4.6,Annex-D(Tread Wear Indicators)	-	1500	5% discount for BIS
Cl. No. 5.1(a) to 5.1 (u)(Markings)	-	1500	5% discount for BIS
Cl. No. 5.2, Annex H, Table No. 19 & 20(Arrangement of Tyre Markings)	-	1500	5% discount for BIS

Complete

19 Mar, 2023

IS 302 : Part 2 : Sec 76 (1999)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 76 electric fence energizers

42500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6.1 OF IS:302-1:2008(Classification)	-	500	5% discount for BIS
Cl.6.2 OF IS:302-1:2008(Classification)	-	500	5% discount for BIS
CL. 1.1(VOLTAGE)	-	500	5% discount for BIS
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	750	5% discount for BIS
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	750	5% discount for BIS
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	750	5% discount for BIS
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	750	5% discount for BIS
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	750	5% discount for BIS
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	750	5% discount for BIS
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	750	5% discount for BIS
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	750	5% discount for BIS
Cl.7(Marking and Instructions)	-	750	5% discount for BIS
Cl.7(Marking and Instructions)	-	750	5% discount for BIS
Cl.7(Marking and Instructions)	-	750	5% discount for BIS
Cl.7.2(Marking and Instructions)	-	750	5% discount for BIS
Cl.7.3(Marking and Instructions)	-	750	5% discount for BIS
Cl.7.3(Marking and Instructions)	-	750	5% discount for BIS
Cl.7.3(Marking and Instructions)	-	750	5% discount for BIS
Cl.7.4(Marking and Instructions)	-	750	5% discount for BIS
Cl.7.5(Marking and Instructions)	-	750	5% discount for BIS
Cl.7.6 & IS:302-1:2008(Marking and Instructions)	-	750	5% discount for BIS
Cl.7.8 of IS :302-1:2008(Marking and Instructions)	-	750	5% discount for BIS
Cl.7.9 of IS :302-1:2008(Marking and Instructions)	-	750	5% discount for BIS
Cl.7.10 of IS :302-1:2008(Marking and Instructions)	-	750	5% discount for BIS
Cl.7.11 of IS :302-1:2008(Marking and Instructions)	-	750	5% discount for BIS
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	750	5% discount for BIS
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	750	5% discount for BIS
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	750	5% discount for BIS
Cl.7.12.2 OF IS:302-1:2008(Marking and Instructions)	-	750	5% discount for BIS
Cl.7.12.3 & IS:302-1:2008(Marking and Instructions)	-	750	5% discount for BIS
Cl.7.12.4 OF IS:302-1:2008(Marking and Instructions)	-	750	5% discount for BIS
Cl.7.12.5 OF IS:302-1:2008(Marking and Instructions)	-	750	5% discount for BIS
Cl.7.12.6 OF IS:302-1:2008(Marking and Instructions)	-	750	5% discount for BIS
Cl.7.12.7 OF IS:302-1:2008(Marking and Instructions)	-	750	5% discount for BIS
Cl.7.12.8 OF IS:302-1:2008(Marking and Instructions)	-	750	5% discount for BIS
Cl.7.13 of IS 302-1:2008(Marking and Instructions)	-	750	5% discount for BIS
Cl.7.14 of IS302-1:2008(Marking and Instructions)	-	750	5% discount for BIS
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	750	5% discount for BIS
Cl.7.16 of IS 302-1:2008(Marking and Instructions)	-	750	5% discount for BIS
Cl.7.101(Marking and Instructions)	-	750	5% discount for BIS
Cl.7.102(Marking and Instructions)	-	750	5% discount for BIS
Cl.8.1 OF IS:302-1:2008(Protection Against Access to Live Parts)	-	750	5% discount for BIS
Cl.8.1.1 OF IS:302-1:2008(Protection Against Access to Live Parts)	-	750	5% discount for BIS
Cl.8.1.2 OF IS:302-1:2008(Protection Against Access to Live Parts)	-	750	5% discount for BIS
Cl.8.1.3 OF IS:302-1:2008(Protection Against Access to Live Parts)	-	750	5% discount for BIS
Cl.8.1.4 OF IS:302-1:2008(Protection Against Access to Live Parts)	-	750	5% discount for BIS
Cl.8.1.5 OF IS:302-1:2008(Protection Against Access to Live Parts)	-	750	5% discount for BIS
Cl.8.2 OF IS:302-1:2008(Protection Against Access to Live Parts)	-	750	5% discount for BIS
Cl.10.1 OF IS:302-1:2008(Power Input and Current)	-	1250	5% discount for BIS
Cl.11.2 OF IS:302-1:2008(Heating)	-	1500	5% discount for BIS
Cl.11.3 OF IS:302-1:2008(Heating)	-	1500	5% discount for BIS
Cl.11.4 OF IS:302-1:2008(Heating)	-	1500	5% discount for BIS
Cl.11.5 OF IS:302-1:2008(Heating)	-	1500	5% discount for BIS
Cl.11.5 OF IS:302-1:2008(Heating)	-	1500	5% discount for BIS
Cl.11.6 OF IS:302-1:2008(Heating)	-	1500	5% discount for BIS
Cl.11.7 OF IS:302-1:2008(Heating)	-	1500	5% discount for BIS
Cl.11.8 OF IS:302-1:2008(Heating)	-	1500	5% discount for BIS
Cl.13.1 OF IS:302-1:2008(Leakage Current & Electric Strength at operating temp.)	-	1500	5% discount for BIS
Cl.13.2 OF IS:302-1:2008(Leakage Current & Electric Strength at operating temp.)	-	1499.99	5% discount for BIS
Cl.13.3 OF IS:302-1:2008(Leakage Current & Electric Strength at operating temp.)	-	1500	5% discount for BIS
Cl.14.101 OF IS:302-1:2008(TRANSIENT OVERVOLTAGE)	-	2000	5% discount for BIS
Cl.15 OF IS: 302-1:2008(Moisture Resistance)	-	2500	5% discount for BIS
Cl.15.3 of IS 302-1:200(Moisture Resistance)	-	2500	5% discount for BIS
Cl.16.1 OF IS:302-1:2008(Leakage Current & Electric Strength)	-	2500	5% discount for BIS
Cl.16.2 OF IS:302-1:2008(Leakage Current & Electric Strength)	-	2500	5% discount for BIS
Cl.16.3 OF IS:302-1:2008(Leakage Current & Electric Strength)	-	2500	5% discount for BIS
Cl.16.101 OF IS:302-1:2008(Leakage Current & Electric Strength)	-	2500	5% discount for BIS
Cl.16.102 OF IS:302-1:2008(Leakage Current & Electric Strength)	-	2500	5% discount for BIS
Cl.18(Endurance.)	-	10000	5% discount for BIS
Cl.19.1 OF IS:302-1:2008(Abnormal Operation.)	-	7500	5% discount for BIS
Cl.19.11 OF IS:302-1:2008(Abnormal Operation.)	-	7500	5% discount for BIS
Cl.19 OF IS:302-1:2008(Abnormal Operation.)	-	7500	5% discount for BIS
Cl.19 OF IS:302-1:2008(Abnormal Operation.)	-	7500	5% discount for BIS
Cl.19.101(Abnormal Operation.)	-	7500	5% discount for BIS
Cl.19.102(Abnormal Operation.)	-	7500	5% discount for BIS
Cl.19.103(Abnormal Operation.)	-	7500	5% discount for BIS
Cl.19.104(Abnormal Operation.)	-	7500	5% discount for BIS
Cl.19.105(Abnormal Operation.)	-	7500	5% discount for BIS
Cl.19.106(Abnormal Operation.)	-	7500	5% discount for BIS
Cl.21 & IS:302-1:2008)(Mechanical Strength.)	-	750	5% discount for BIS
Cl.21.2 of IS 302-1:2008(Mechanical Strength.)	-	750	5% discount for BIS
Cl.21.101(Mechanical Strength.)	-	750	5% discount for BIS
Cl.22.1 of IS 302-1:2008(Construction)	-	750	5% discount for BIS
Cl.22.2 of IS 302-1:2008(Construction)	-	750	5% discount for BIS
Cl.22.3 of IS 302-1:2008(Construction)	-	750	5% discount for BIS
Cl.22.4 of IS 302-1:2008(Construction)	-	750	5% discount for BIS
Cl.22.5 of IS 302-1:2008(Construction)	-	750	5% discount for BIS
Cl.22.6 of IS 302-1:2008(Construction)	-	750	5% discount for BIS
Cl.22.7 of IS 302-1:2008(Construction)	-	750	5% discount for BIS
Cl.22.8 of IS 302-1:2008(Construction)	-	750	5% discount for BIS
Cl.22.9 of IS 302-1:2008(Construction)	-	750	5% discount for BIS
Cl.22.10 of IS 302-1:2008(Construction)	-	750	5% discount for BIS
Cl.22.11(Construction)	-	750	5% discount for BIS
Cl.22.12 of IS 302-1:2008(Construction)	-	750	5% discount for BIS
Cl.22.13 of IS 302-1:2008(Construction)	-	750	5% discount for BIS
Cl.22.14 of IS 302-1:2008(Construction)	-	750	5% discount for BIS
Cl.22.15 of IS 302-1:2008(Construction)	-	750	5% discount for BIS
Cl.22.16 of IS 302-1:2008(Construction)	-	750	5% discount for BIS
Cl.22.17of IS 302-1:2008(Construction)	-	750	5% discount for BIS
Cl.22.18 of IS 302-1:2008(Construction)	-	750	5% discount for BIS
Cl.22.19 of IS 302-1:2008(Construction)	-	750	5% discount for BIS
Cl.22.20 of IS 302-1:2008(Construction)	-	750	5% discount for BIS
Cl.22.21 of IS 302-1:2008(Construction)	-	750	5% discount for BIS
Cl.22.22 of IS 302-1:2008(Construction)	-	750	5% discount for BIS
Cl.22.23 of IS 302-1:2008(Construction)	-	750	5% discount for BIS
Cl.22.24 of IS 302-1:2008(Construction)	-	750	5% discount for BIS
Cl.22.25 of IS 302-1:2008(Construction)	-	750	5% discount for BIS
Cl.22.26 of IS 302-1:2008(Construction)	-	750	5% discount for BIS
Cl.22.27 of IS 302-1:2008(Construction)	-	750	5% discount for BIS
Cl.22.28 of IS 302-1:2008(Construction)	-	750	5% discount for BIS
Cl.22.29 of IS 302-1:2008(Construction)	-	750	5% discount for BIS
Cl.22.31 of IS 302-1:2008(Construction)	-	750	5% discount for BIS
Cl.22.32 of IS 302-1:2008(Construction)	-	750	5% discount for BIS
Cl.22.33 of IS 302-1:2008(Construction)	-	750	5% discount for BIS
Cl.22.34 of IS 302-1:2008(Construction)	-	750	5% discount for BIS
Cl.22.35 of IS 302-1:2008(Construction)	-	750	5% discount for BIS
Cl.22.36 of IS 302-1:2008(Construction)	-	750	5% discount for BIS
Cl.22.37 of IS 302-1:2008(Construction)	-	750	5% discount for BIS
Cl.22.38 of IS 302-1:2008(Construction)	-	750	5% discount for BIS
Cl.22.39 of IS 302-1:2008(Construction)	-	750	5% discount for BIS
Cl.22.40 of IS 302-1:2008(Construction)	-	750	5% discount for BIS
Cl.22.41 of IS 302-1:2008(Construction)	-	750	5% discount for BIS
Cl.22.42 of IS 302-1:2008(Construction)	-	750	5% discount for BIS
Cl.22.43 of IS 302-1:2008(Construction)	-	750	5% discount for BIS
Cl.22.44 of IS 302-1:2008(Construction)	-	750	5% discount for BIS
Cl.22.45 of IS 302-1:2008(Construction)	-	750	5% discount for BIS
Cl.22.46 of IS 302-1:2008(Construction)	-	750	5% discount for BIS
Cl.22.47 of IS 302-1:2008(Construction)	-	750	5% discount for BIS
Cl.22.48 of IS 302-1:2008(Construction)	-	750	5% discount for BIS
Cl. 22.101(Construction)	-	750	5% discount for BIS
Cl. 22.102(Construction)	-	750	5% discount for BIS
Cl. 22.103(Construction)	-	750	5% discount for BIS
Cl. 22.104(Construction)	-	750	5% discount for BIS
Cl. 22.105(Construction)	-	750	5% discount for BIS
Cl. 22.106(Construction)	-	750	5% discount for BIS
Cl. 22.107(Construction)	-	750	5% discount for BIS
Cl. 22.108(Construction)	-	750	5% discount for BIS
Cl. 22.109(Construction)	-	750	5% discount for BIS
Cl.23.1 of IS:302-1:2008(Internal Wiring)	-	750	5% discount for BIS
Cl.23.2 of IS:302-1:2008(Internal Wiring)	-	750	5% discount for BIS
Cl.23.3 of IS:302-1:2008(Internal Wiring)	-	749.99	5% discount for BIS
Cl.23.4 of IS:302-1:2008(Internal Wiring)	-	750	5% discount for BIS
Cl.23.5 of IS:302-1:2008(Internal Wiring)	-	750	5% discount for BIS
Cl.23.6 of IS:302-1:2008(Internal Wiring)	-	750	5% discount for BIS
Cl.23.7 of IS:302-1:2008(Internal Wiring)	-	750	5% discount for BIS
Cl.23.8 of IS:302-1:2008(Internal Wiring)	-	750	5% discount for BIS
Cl.23.9 of IS:302-1:2008(Internal Wiring)	-	750	5% discount for BIS
Cl.23.10 of IS:302-1:2008(Internal Wiring)	-	750	5% discount for BIS
Cl.24.1 of IS 302-1:2008(Components)	-	500	5% discount for BIS
Cl.24.1.1 of IS 302-1:2008(Components)	-	500	5% discount for BIS
Cl.24.1.2 of IS 302-1:2008(Components)	-	500	5% discount for BIS
Cl.24.1.3 of IS 302-1:2008(Components)	-	500	5% discount for BIS
Cl.24.1.4 of IS 302-1:2008(Components)	-	500	5% discount for BIS
Cl.24.1.5 of IS 302-1:2008(Components)	-	500	5% discount for BIS
Cl.24.1.6 of IS 302-1:2008(Components)	-	500	5% discount for BIS
Cl.24.2 of IS 302-1:2008(Components)	-	500	5% discount for BIS
Cl.24.3 of IS 302-1:2008(Components)	-	500	5% discount for BIS
Cl.24.4 of IS 302-1:2008(Components)	-	500	5% discount for BIS
Cl.24.5 of IS 302-1:2008(Components)	-	500	5% discount for BIS
Cl.24.6 of IS 302-1:2008(Components)	-	500	5% discount for BIS
Cl.25.1 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	500	5% discount for BIS
Cl.25.1 -ADDITION(Supply Connection And External Flexible Cords)	-	500	5% discount for BIS
Cl.25.2 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	500	5% discount for BIS
Cl.25.3 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	500	5% discount for BIS
Cl.25.4 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	500	5% discount for BIS
Cl.25.5 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	500	5% discount for BIS
Cl.25.6 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	500	5% discount for BIS
Cl.25.7 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	500	5% discount for BIS
Cl.25.8 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	500	5% discount for BIS
Cl.25.9 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	500	5% discount for BIS
Cl.25.10 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	500	5% discount for BIS
Cl.25.11 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	500	5% discount for BIS
Cl.25.12 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	500	5% discount for BIS
Cl.25.13 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	500	5% discount for BIS
Cl.25.14 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	500	5% discount for BIS
Cl.25.15 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	500	5% discount for BIS
Cl.25.16 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	500	5% discount for BIS
Cl.25.17 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	500	5% discount for BIS
Cl.25.18 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	500	5% discount for BIS
Cl.25.19 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	500	5% discount for BIS
Cl.25.20 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	500	5% discount for BIS
Cl.25.21 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	500	5% discount for BIS
Cl.25.22 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	500	5% discount for BIS
Cl.25.23 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	500	5% discount for BIS
Cl.25.24 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	500	5% discount for BIS
Cl.25.25 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	500	5% discount for BIS
Cl.26.1 of IS 302-1:2008(Terminals for external conductors)	-	500	5% discount for BIS
Cl.26.2 of IS 302-1:2008(Terminals for external conductors)	-	500	5% discount for BIS
Cl.26.3 of IS 302-1:2008(Terminals for external conductors)	-	500	5% discount for BIS
Cl.26.4 of IS 302-1:2008(Terminals for external conductors)	-	500	5% discount for BIS
Cl.26.5 of IS 302-1:2008(Terminals for external conductors)	-	500	5% discount for BIS
Cl.26.6 of IS 302-1:2008(Terminals for external conductors)	-	500	5% discount for BIS
Cl.26.7 of IS 302-1:2008(Terminals for external conductors)	-	500	5% discount for BIS
Cl.26.8 of IS 302-1:2008(Terminals for external conductors)	-	500	5% discount for BIS
Cl.26.9 of IS 302-1:2008(Terminals for external conductors)	-	500	5% discount for BIS
Cl.26.10 of IS 302-1:2008(Terminals for external conductors)	-	500	5% discount for BIS
Cl.26.11 of IS 302-1:2008(Terminals for external conductors)	-	500	5% discount for BIS
Cl.26.101(Terminals for external conductors)	-	500	5% discount for BIS
Cl.26.102(Terminals for external conductors)	-	500	5% discount for BIS
Cl.26.103(Terminals for external conductors)	-	500	5% discount for BIS
Cl.27.1 of IS 302-1:2008(Provision For Earthing)	-	0	5% discount for BIS
Cl.27.2 of IS 302-1:2008(Provision For Earthing)	-	0	5% discount for BIS
Cl.27.3 of IS 302-1:2008(Provision For Earthing)	-	0	5% discount for BIS
Cl.27.4 of IS 302-1:2008(Provision For Earthing)	-	0	5% discount for BIS
Cl.27.5 of IS 302-1:2008(Provision For Earthing)	-	0	5% discount for BIS
Cl.27.6 of IS 302-1:2008(Provision For Earthing)	-	0	5% discount for BIS
Cl.28.1 of IS 302-1:2008(Screws and connections)	-	500	5% discount for BIS
Cl.28.2 of IS 302-1:2008(Screws and connections)	-	500	5% discount for BIS
Cl.28.3 of IS 302-1:2008(Screws and connections)	-	500	5% discount for BIS
Cl.28.4 of IS 302-1:2008(Screws and connections)	-	500	5% discount for BIS
CL.29 of IS 302-1:2008("Clearances, Creepage distances and solid insulation")	-	500	5% discount for BIS
CL.29.1 of IS 302-1:2008("Clearances, Creepage distances and solid insulation")	-	500	5% discount for BIS
CL.29.2 of IS 302-1:2008("Clearances, Creepage distances and solid insulation")	-	500	5% discount for BIS
CL.29.3 of IS 302-1:2008("Clearances, Creepage distances and solid insulation")	-	500	5% discount for BIS
CL.30.1 of IS 302-1:2008(Resistance to heat and fire)	-	500	5% discount for BIS
CL.30.2 of IS 302-1:2008(Resistance to heat and fire)	-	500	5% discount for BIS
CL.30.2.1 of IS 302-1:2008(Resistance to heat and fire)	-	500	5% discount for BIS
CL.30.2.2 of IS 302-1:2008(Resistance to heat and fire)	-	500	5% discount for BIS
CL.30.2.3 of IS 302-1:2008(Resistance to heat and fire)	-	500	5% discount for BIS
CL.30.2.4 of IS 302-1:2008(Resistance to heat and fire)	-	500	5% discount for BIS
CL.31 of IS 302-1:2008(Resistance to Rusting)	-	500	5% discount for BIS
CL.32 of IS 302-1:2008(Radiation, toxicity and similar hazards)	-	1000	5% discount for BIS
Cl.6.1 OF IS:302-1:2008(Classification)	-	0	-
Cl.6.2 OF IS:302-1:2008(Classification)	-	0	-
CL. 1.1(VOLTAGE)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7(Marking and Instructions)	-	0	-
Cl.7(Marking and Instructions)	-	0	-
Cl.7(Marking and Instructions)	-	0	-
Cl.7.2(Marking and Instructions)	-	0	-
Cl.7.3(Marking and Instructions)	-	0	-
Cl.7.3(Marking and Instructions)	-	0	-
Cl.7.3(Marking and Instructions)	-	0	-
Cl.7.4(Marking and Instructions)	-	0	-
Cl.7.5(Marking and Instructions)	-	0	-
Cl.7.6 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.8 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.9 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.10 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.11 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.2 OF IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.3 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.4 OF IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.5 OF IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.6 OF IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.7 OF IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.8 OF IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.13 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.14 of IS302-1:2008(Marking and Instructions)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.16 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.101(Marking and Instructions)	-	0	-
Cl.7.102(Marking and Instructions)	-	0	-
Cl.8.1 OF IS:302-1:2008(Protection Against Access to Live Parts)	-	0	-
Cl.8.1.1 OF IS:302-1:2008(Protection Against Access to Live Parts)	-	0	-
Cl.8.1.2 OF IS:302-1:2008(Protection Against Access to Live Parts)	-	0	-
Cl.8.1.3 OF IS:302-1:2008(Protection Against Access to Live Parts)	-	0	-
Cl.8.1.4 OF IS:302-1:2008(Protection Against Access to Live Parts)	-	0	-
Cl.8.1.5 OF IS:302-1:2008(Protection Against Access to Live Parts)	-	0	-
Cl.8.2 OF IS:302-1:2008(Protection Against Access to Live Parts)	-	0	-
Cl.10.1 OF IS:302-1:2008(Power Input and Current)	-	0	-
Cl.11.2 OF IS:302-1:2008(Heating)	-	0	-
Cl.11.3 OF IS:302-1:2008(Heating)	-	0	-
Cl.11.4 OF IS:302-1:2008(Heating)	-	0	-
Cl.11.5 OF IS:302-1:2008(Heating)	-	0	-
Cl.11.5 OF IS:302-1:2008(Heating)	-	0	-
Cl.11.6 OF IS:302-1:2008(Heating)	-	0	-
Cl.11.7 OF IS:302-1:2008(Heating)	-	0	-
Cl.11.8 OF IS:302-1:2008(Heating)	-	0	-
Cl.13.1 OF IS:302-1:2008(Leakage Current & Electric Strength at operating temp.)	-	0	-
Cl.13.2 OF IS:302-1:2008(Leakage Current & Electric Strength at operating temp.)	-	0	-
Cl.13.3 OF IS:302-1:2008(Leakage Current & Electric Strength at operating temp.)	-	0	-
Cl.14.101 OF IS:302-1:2008(TRANSIENT OVERVOLTAGE)	-	0	-
Cl.15 OF IS: 302-1:2008(Moisture Resistance)	-	0	-
Cl.15.3 of IS 302-1:200(Moisture Resistance)	-	0	-
Cl.16.1 OF IS:302-1:2008(Leakage Current & Electric Strength)	-	0	-
Cl.16.2 OF IS:302-1:2008(Leakage Current & Electric Strength)	-	0	-
Cl.16.3 OF IS:302-1:2008(Leakage Current & Electric Strength)	-	0	-
Cl.16.101 OF IS:302-1:2008(Leakage Current & Electric Strength)	-	0	-
Cl.16.102 OF IS:302-1:2008(Leakage Current & Electric Strength)	-	0	-
Cl.18(Endurance.)	-	0	-
Cl.19.1 OF IS:302-1:2008(Abnormal Operation.)	-	0	-
Cl.19.11 OF IS:302-1:2008(Abnormal Operation.)	-	0	-
Cl.19 OF IS:302-1:2008(Abnormal Operation.)	-	0	-
Cl.19 OF IS:302-1:2008(Abnormal Operation.)	-	0	-
Cl.19.101(Abnormal Operation.)	-	0	-
Cl.19.102(Abnormal Operation.)	-	0	-
Cl.19.103(Abnormal Operation.)	-	0	-
Cl.19.104(Abnormal Operation.)	-	0	-
Cl.19.105(Abnormal Operation.)	-	0	-
Cl.19.106(Abnormal Operation.)	-	0	-
Cl.21 & IS:302-1:2008)(Mechanical Strength.)	-	0	-
Cl.21.2 of IS 302-1:2008(Mechanical Strength.)	-	0	-
Cl.21.101(Mechanical Strength.)	-	0	-
Cl.22.1 of IS 302-1:2008(Construction)	-	0	-
Cl.22.2 of IS 302-1:2008(Construction)	-	0	-
Cl.22.3 of IS 302-1:2008(Construction)	-	0	-
Cl.22.4 of IS 302-1:2008(Construction)	-	0	-
Cl.22.5 of IS 302-1:2008(Construction)	-	0	-
Cl.22.6 of IS 302-1:2008(Construction)	-	0	-
Cl.22.7 of IS 302-1:2008(Construction)	-	0	-
Cl.22.8 of IS 302-1:2008(Construction)	-	0	-
Cl.22.9 of IS 302-1:2008(Construction)	-	0	-
Cl.22.10 of IS 302-1:2008(Construction)	-	0	-
Cl.22.11(Construction)	-	0	-
Cl.22.12 of IS 302-1:2008(Construction)	-	0	-
Cl.22.13 of IS 302-1:2008(Construction)	-	0	-
Cl.22.14 of IS 302-1:2008(Construction)	-	0	-
Cl.22.15 of IS 302-1:2008(Construction)	-	0	-
Cl.22.16 of IS 302-1:2008(Construction)	-	0	-
Cl.22.17of IS 302-1:2008(Construction)	-	0	-
Cl.22.18 of IS 302-1:2008(Construction)	-	0	-
Cl.22.19 of IS 302-1:2008(Construction)	-	0	-
Cl.22.20 of IS 302-1:2008(Construction)	-	0	-
Cl.22.21 of IS 302-1:2008(Construction)	-	0	-
Cl.22.22 of IS 302-1:2008(Construction)	-	0	-
Cl.22.23 of IS 302-1:2008(Construction)	-	0	-
Cl.22.24 of IS 302-1:2008(Construction)	-	0	-
Cl.22.25 of IS 302-1:2008(Construction)	-	0	-
Cl.22.26 of IS 302-1:2008(Construction)	-	0	-
Cl.22.27 of IS 302-1:2008(Construction)	-	0	-
Cl.22.28 of IS 302-1:2008(Construction)	-	0	-
Cl.22.29 of IS 302-1:2008(Construction)	-	0	-
Cl.22.31 of IS 302-1:2008(Construction)	-	0	-
Cl.22.32 of IS 302-1:2008(Construction)	-	0	-
Cl.22.33 of IS 302-1:2008(Construction)	-	0	-
Cl.22.34 of IS 302-1:2008(Construction)	-	0	-
Cl.22.35 of IS 302-1:2008(Construction)	-	0	-
Cl.22.36 of IS 302-1:2008(Construction)	-	0	-
Cl.22.37 of IS 302-1:2008(Construction)	-	0	-
Cl.22.38 of IS 302-1:2008(Construction)	-	0	-
Cl.22.39 of IS 302-1:2008(Construction)	-	0	-
Cl.22.40 of IS 302-1:2008(Construction)	-	0	-
Cl.22.41 of IS 302-1:2008(Construction)	-	0	-
Cl.22.42 of IS 302-1:2008(Construction)	-	0	-
Cl.22.43 of IS 302-1:2008(Construction)	-	0	-
Cl.22.44 of IS 302-1:2008(Construction)	-	0	-
Cl.22.45 of IS 302-1:2008(Construction)	-	0	-
Cl.22.46 of IS 302-1:2008(Construction)	-	0	-
Cl.22.47 of IS 302-1:2008(Construction)	-	0	-
Cl.22.48 of IS 302-1:2008(Construction)	-	0	-
Cl. 22.101(Construction)	-	0	-
Cl. 22.102(Construction)	-	0	-
Cl. 22.103(Construction)	-	0	-
Cl. 22.104(Construction)	-	0	-
Cl. 22.105(Construction)	-	0	-
Cl. 22.106(Construction)	-	0	-
Cl. 22.107(Construction)	-	0	-
Cl. 22.108(Construction)	-	0	-
Cl. 22.109(Construction)	-	0	-
Cl.23.1 of IS:302-1:2008(Internal Wiring)	-	0	-
Cl.23.2 of IS:302-1:2008(Internal Wiring)	-	0	-
Cl.23.3 of IS:302-1:2008(Internal Wiring)	-	0	-
Cl.23.4 of IS:302-1:2008(Internal Wiring)	-	0	-
Cl.23.5 of IS:302-1:2008(Internal Wiring)	-	0	-
Cl.23.6 of IS:302-1:2008(Internal Wiring)	-	0	-
Cl.23.7 of IS:302-1:2008(Internal Wiring)	-	0	-
Cl.23.8 of IS:302-1:2008(Internal Wiring)	-	0	-
Cl.23.9 of IS:302-1:2008(Internal Wiring)	-	0	-
Cl.23.10 of IS:302-1:2008(Internal Wiring)	-	0	-
Cl.25.1 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.1 -ADDITION(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.2 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.3 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.4 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.5 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.6 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.7 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.8 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.9 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.10 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.11 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.12 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.13 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.14 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.15 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.16 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.17 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.18 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.19 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.20 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.21 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.22 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.23 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.24 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.25 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.26.1 of IS 302-1:2008(Terminals for external conductors)	-	0	-
Cl.26.2 of IS 302-1:2008(Terminals for external conductors)	-	0	-
Cl.26.3 of IS 302-1:2008(Terminals for external conductors)	-	0	-
Cl.26.4 of IS 302-1:2008(Terminals for external conductors)	-	0	-
Cl.26.5 of IS 302-1:2008(Terminals for external conductors)	-	0	-
Cl.26.6 of IS 302-1:2008(Terminals for external conductors)	-	0	-
Cl.26.7 of IS 302-1:2008(Terminals for external conductors)	-	0	-
Cl.26.8 of IS 302-1:2008(Terminals for external conductors)	-	0	-
Cl.26.9 of IS 302-1:2008(Terminals for external conductors)	-	0	-
Cl.26.10 of IS 302-1:2008(Terminals for external conductors)	-	0	-
Cl.26.11 of IS 302-1:2008(Terminals for external conductors)	-	0	-
Cl.26.101(Terminals for external conductors)	-	0	-
Cl.26.102(Terminals for external conductors)	-	0	-
Cl.26.103(Terminals for external conductors)	-	0	-
Cl.27.1 of IS 302-1:2008(Provision For Earthing)	-	0	-
Cl.27.2 of IS 302-1:2008(Provision For Earthing)	-	0	-
Cl.27.3 of IS 302-1:2008(Provision For Earthing)	-	0	-
Cl.27.4 of IS 302-1:2008(Provision For Earthing)	-	0	-
Cl.27.5 of IS 302-1:2008(Provision For Earthing)	-	0	-
Cl.27.6 of IS 302-1:2008(Provision For Earthing)	-	0	-
Cl.28.1 of IS 302-1:2008(Screws and connections)	-	0	-
Cl.28.2 of IS 302-1:2008(Screws and connections)	-	0	-
Cl.28.3 of IS 302-1:2008(Screws and connections)	-	0	-
Cl.28.4 of IS 302-1:2008(Screws and connections)	-	0	-
CL.29 of IS 302-1:2008("Clearances, Creepage distances and solid insulation")	-	0	-
CL.29.1 of IS 302-1:2008("Clearances, Creepage distances and solid insulation")	-	0	-
CL.29.2 of IS 302-1:2008("Clearances, Creepage distances and solid insulation")	-	0	-
CL.29.3 of IS 302-1:2008("Clearances, Creepage distances and solid insulation")	-	0	-
CL.30.1 of IS 302-1:2008(Resistance to heat and fire)	-	0	-
CL.30.2 of IS 302-1:2008(Resistance to heat and fire)	-	0	-
CL.30.2.1 of IS 302-1:2008(Resistance to heat and fire)	-	0	-
CL.30.2.2 of IS 302-1:2008(Resistance to heat and fire)	-	0	-
CL.30.2.3 of IS 302-1:2008(Resistance to heat and fire)	-	0	-
CL.30.2.4 of IS 302-1:2008(Resistance to heat and fire)	-	0	-
CL.31 of IS 302-1:2008(Resistance to Rusting)	-	0	-
CL.32 of IS 302-1:2008(Radiation, toxicity and similar hazards)	-	0	-
Cl.6.1 OF IS:302-1:2008(Classification)	-	0	-
Cl.6.2 OF IS:302-1:2008(Classification)	-	0	-
CL. 1.1(VOLTAGE)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7(Marking and Instructions)	-	0	-
Cl.7(Marking and Instructions)	-	0	-
Cl.7(Marking and Instructions)	-	0	-
Cl.7.2(Marking and Instructions)	-	0	-
Cl.7.3(Marking and Instructions)	-	0	-
Cl.7.3(Marking and Instructions)	-	0	-
Cl.7.3(Marking and Instructions)	-	0	-
Cl.7.4(Marking and Instructions)	-	0	-
Cl.7.5(Marking and Instructions)	-	0	-
Cl.7.6 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.8 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.9 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.10 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.11 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.2 OF IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.3 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.4 OF IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.5 OF IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.6 OF IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.7 OF IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.8 OF IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.13 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.14 of IS302-1:2008(Marking and Instructions)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.16 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.101(Marking and Instructions)	-	0	-
Cl.7.102(Marking and Instructions)	-	0	-
Cl.8.1 OF IS:302-1:2008(Protection Against Access to Live Parts)	-	0	-
Cl.8.1.1 OF IS:302-1:2008(Protection Against Access to Live Parts)	-	0	-
Cl.8.1.2 OF IS:302-1:2008(Protection Against Access to Live Parts)	-	0	-
Cl.8.1.3 OF IS:302-1:2008(Protection Against Access to Live Parts)	-	0	-
Cl.8.1.4 OF IS:302-1:2008(Protection Against Access to Live Parts)	-	0	-
Cl.8.1.5 OF IS:302-1:2008(Protection Against Access to Live Parts)	-	0	-
Cl.8.2 OF IS:302-1:2008(Protection Against Access to Live Parts)	-	0	-
Cl.10.1 OF IS:302-1:2008(Power Input and Current)	-	0	-
Cl.11.2 OF IS:302-1:2008(Heating)	-	0	-
Cl.11.3 OF IS:302-1:2008(Heating)	-	0	-
Cl.11.4 OF IS:302-1:2008(Heating)	-	0	-
Cl.11.5 OF IS:302-1:2008(Heating)	-	0	-
Cl.11.5 OF IS:302-1:2008(Heating)	-	0	-
Cl.11.6 OF IS:302-1:2008(Heating)	-	0	-
Cl.11.7 OF IS:302-1:2008(Heating)	-	0	-
Cl.11.8 OF IS:302-1:2008(Heating)	-	0	-
Cl.13.1 OF IS:302-1:2008(Leakage Current & Electric Strength at operating temp.)	-	0	-
Cl.13.2 OF IS:302-1:2008(Leakage Current & Electric Strength at operating temp.)	-	0	-
Cl.13.3 OF IS:302-1:2008(Leakage Current & Electric Strength at operating temp.)	-	0	-
Cl.14.101 OF IS:302-1:2008(TRANSIENT OVERVOLTAGE)	-	0	-
Cl.15 OF IS: 302-1:2008(Moisture Resistance)	-	0	-
Cl.15.3 of IS 302-1:200(Moisture Resistance)	-	0	-
Cl.16.1 OF IS:302-1:2008(Leakage Current & Electric Strength)	-	0	-
Cl.16.2 OF IS:302-1:2008(Leakage Current & Electric Strength)	-	0	-
Cl.16.3 OF IS:302-1:2008(Leakage Current & Electric Strength)	-	0	-
Cl.16.101 OF IS:302-1:2008(Leakage Current & Electric Strength)	-	0	-
Cl.16.102 OF IS:302-1:2008(Leakage Current & Electric Strength)	-	0	-
Cl.18(Endurance.)	-	0	-
Cl.19.1 OF IS:302-1:2008(Abnormal Operation.)	-	0	-
Cl.19.11 OF IS:302-1:2008(Abnormal Operation.)	-	0	-
Cl.19 OF IS:302-1:2008(Abnormal Operation.)	-	0	-
Cl.19 OF IS:302-1:2008(Abnormal Operation.)	-	0	-
Cl.19.101(Abnormal Operation.)	-	0	-
Cl.19.102(Abnormal Operation.)	-	0	-
Cl.19.103(Abnormal Operation.)	-	0	-
Cl.19.104(Abnormal Operation.)	-	0	-
Cl.19.105(Abnormal Operation.)	-	0	-
Cl.19.106(Abnormal Operation.)	-	0	-
Cl.21 & IS:302-1:2008)(Mechanical Strength.)	-	0	-
Cl.21.2 of IS 302-1:2008(Mechanical Strength.)	-	0	-
Cl.21.101(Mechanical Strength.)	-	0	-
Cl.22.1 of IS 302-1:2008(Construction)	-	0	-
Cl.22.2 of IS 302-1:2008(Construction)	-	0	-
Cl.22.3 of IS 302-1:2008(Construction)	-	0	-
Cl.22.4 of IS 302-1:2008(Construction)	-	0	-
Cl.22.5 of IS 302-1:2008(Construction)	-	0	-
Cl.22.6 of IS 302-1:2008(Construction)	-	0	-
Cl.22.7 of IS 302-1:2008(Construction)	-	0	-
Cl.22.8 of IS 302-1:2008(Construction)	-	0	-
Cl.22.9 of IS 302-1:2008(Construction)	-	0	-
Cl.22.10 of IS 302-1:2008(Construction)	-	0	-
Cl.22.11(Construction)	-	0	-
Cl.22.12 of IS 302-1:2008(Construction)	-	0	-
Cl.22.13 of IS 302-1:2008(Construction)	-	0	-
Cl.22.14 of IS 302-1:2008(Construction)	-	0	-
Cl.22.15 of IS 302-1:2008(Construction)	-	0	-
Cl.22.16 of IS 302-1:2008(Construction)	-	0	-
Cl.22.17of IS 302-1:2008(Construction)	-	0	-
Cl.22.18 of IS 302-1:2008(Construction)	-	0	-
Cl.22.19 of IS 302-1:2008(Construction)	-	0	-
Cl.22.20 of IS 302-1:2008(Construction)	-	0	-
Cl.22.21 of IS 302-1:2008(Construction)	-	0	-
Cl.22.22 of IS 302-1:2008(Construction)	-	0	-
Cl.22.23 of IS 302-1:2008(Construction)	-	0	-
Cl.22.24 of IS 302-1:2008(Construction)	-	0	-
Cl.22.25 of IS 302-1:2008(Construction)	-	0	-
Cl.22.26 of IS 302-1:2008(Construction)	-	0	-
Cl.22.27 of IS 302-1:2008(Construction)	-	0	-
Cl.22.28 of IS 302-1:2008(Construction)	-	0	-
Cl.22.29 of IS 302-1:2008(Construction)	-	0	-
Cl.22.31 of IS 302-1:2008(Construction)	-	0	-
Cl.22.32 of IS 302-1:2008(Construction)	-	0	-
Cl.22.33 of IS 302-1:2008(Construction)	-	0	-
Cl.22.34 of IS 302-1:2008(Construction)	-	0	-
Cl.22.35 of IS 302-1:2008(Construction)	-	0	-
Cl.22.36 of IS 302-1:2008(Construction)	-	0	-
Cl.22.37 of IS 302-1:2008(Construction)	-	0	-
Cl.22.38 of IS 302-1:2008(Construction)	-	0	-
Cl.22.39 of IS 302-1:2008(Construction)	-	0	-
Cl.22.40 of IS 302-1:2008(Construction)	-	0	-
Cl.22.41 of IS 302-1:2008(Construction)	-	0	-
Cl.22.42 of IS 302-1:2008(Construction)	-	0	-
Cl.22.43 of IS 302-1:2008(Construction)	-	0	-
Cl.22.44 of IS 302-1:2008(Construction)	-	0	-
Cl.22.45 of IS 302-1:2008(Construction)	-	0	-
Cl.22.46 of IS 302-1:2008(Construction)	-	0	-
Cl.22.47 of IS 302-1:2008(Construction)	-	0	-
Cl.22.48 of IS 302-1:2008(Construction)	-	0	-
Cl. 22.101(Construction)	-	0	-
Cl. 22.102(Construction)	-	0	-
Cl. 22.103(Construction)	-	0	-
Cl. 22.104(Construction)	-	0	-
Cl. 22.105(Construction)	-	0	-
Cl. 22.106(Construction)	-	0	-
Cl. 22.107(Construction)	-	0	-
Cl. 22.108(Construction)	-	0	-
Cl. 22.109(Construction)	-	0	-
Cl.23.1 of IS:302-1:2008(Internal Wiring)	-	0	-
Cl.23.2 of IS:302-1:2008(Internal Wiring)	-	0	-
Cl.23.3 of IS:302-1:2008(Internal Wiring)	-	0	-
Cl.23.4 of IS:302-1:2008(Internal Wiring)	-	0	-
Cl.23.5 of IS:302-1:2008(Internal Wiring)	-	0	-
Cl.23.6 of IS:302-1:2008(Internal Wiring)	-	0	-
Cl.23.7 of IS:302-1:2008(Internal Wiring)	-	0	-
Cl.23.8 of IS:302-1:2008(Internal Wiring)	-	0	-
Cl.23.9 of IS:302-1:2008(Internal Wiring)	-	0	-
Cl.23.10 of IS:302-1:2008(Internal Wiring)	-	0	-
Cl.25.1 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.1 -ADDITION(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.2 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.3 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.4 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.5 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.6 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.7 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.8 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.9 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.10 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.11 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.12 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.13 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.14 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.15 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.16 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.17 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.18 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.19 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.20 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.21 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.22 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.23 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.24 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.25 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.26.1 of IS 302-1:2008(Terminals for external conductors)	-	0	-
Cl.26.2 of IS 302-1:2008(Terminals for external conductors)	-	0	-
Cl.26.3 of IS 302-1:2008(Terminals for external conductors)	-	0	-
Cl.26.4 of IS 302-1:2008(Terminals for external conductors)	-	0	-
Cl.26.5 of IS 302-1:2008(Terminals for external conductors)	-	0	-
Cl.26.6 of IS 302-1:2008(Terminals for external conductors)	-	0	-
Cl.26.7 of IS 302-1:2008(Terminals for external conductors)	-	0	-
Cl.26.8 of IS 302-1:2008(Terminals for external conductors)	-	0	-
Cl.26.9 of IS 302-1:2008(Terminals for external conductors)	-	0	-
Cl.26.10 of IS 302-1:2008(Terminals for external conductors)	-	0	-
Cl.26.11 of IS 302-1:2008(Terminals for external conductors)	-	0	-
Cl.26.101(Terminals for external conductors)	-	0	-
Cl.26.102(Terminals for external conductors)	-	0	-
Cl.26.103(Terminals for external conductors)	-	0	-
Cl.27.1 of IS 302-1:2008(Provision For Earthing)	-	0	-
Cl.27.2 of IS 302-1:2008(Provision For Earthing)	-	0	-
Cl.27.3 of IS 302-1:2008(Provision For Earthing)	-	0	-
Cl.27.4 of IS 302-1:2008(Provision For Earthing)	-	0	-
Cl.27.5 of IS 302-1:2008(Provision For Earthing)	-	0	-
Cl.27.6 of IS 302-1:2008(Provision For Earthing)	-	0	-
Cl.28.1 of IS 302-1:2008(Screws and connections)	-	0	-
Cl.28.2 of IS 302-1:2008(Screws and connections)	-	0	-
Cl.28.3 of IS 302-1:2008(Screws and connections)	-	0	-
Cl.28.4 of IS 302-1:2008(Screws and connections)	-	0	-
CL.29 of IS 302-1:2008("Clearances, Creepage distances and solid insulation")	-	0	-
CL.29.1 of IS 302-1:2008("Clearances, Creepage distances and solid insulation")	-	0	-
CL.29.2 of IS 302-1:2008("Clearances, Creepage distances and solid insulation")	-	0	-
CL.29.3 of IS 302-1:2008("Clearances, Creepage distances and solid insulation")	-	0	-
CL.30.1 of IS 302-1:2008(Resistance to heat and fire)	-	0	-
CL.30.2 of IS 302-1:2008(Resistance to heat and fire)	-	0	-
CL.30.2.1 of IS 302-1:2008(Resistance to heat and fire)	-	0	-
CL.30.2.2 of IS 302-1:2008(Resistance to heat and fire)	-	0	-
CL.30.2.3 of IS 302-1:2008(Resistance to heat and fire)	-	0	-
CL.30.2.4 of IS 302-1:2008(Resistance to heat and fire)	-	0	-
CL.31 of IS 302-1:2008(Resistance to Rusting)	-	0	-
CL.32 of IS 302-1:2008(Radiation, toxicity and similar hazards)	-	0	-
Cl.14.102 OF IS:302-1:2008 (TRANSIENT OVERVOLTAGE)(TRANSIENT OVERVOLTAGE)	-	2000	-
Cl.14.103 OF IS:302-1:2008 (TRANSIENT OVERVOLTAGE)(TRANSIENT OVERVOLTAGE)	-	2000	-
Cl.14.104 OF IS:302-1:2008 (TRANSIENT OVERVOLTAGE)(TRANSIENT OVERVOLTAGE)	-	2000	-

Complete

19 Mar, 2023

IS 302 : Part 2 : Sec 75 (2018)

Safety of Household and Similar Electrical Appliances Part 2 Particular Requirements Section 75 Commercial Dispensing Appliances and Vending Machines

32950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1 to 7.13, 7.15, 7.16(Marking)	-	250	5% discount for BIS
7.14(Legibility & Durability of Markings test)	-	250	5% discount for BIS
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	750	5% discount for BIS
8.1.2(Protection against access to live parts)	-	750	5% discount for BIS
8.1.3(Protection against access to live parts)	-	750	5% discount for BIS
8.1.4(Protection against access to live parts)	-	750	5% discount for BIS
8.1.5(Protection against access to live parts)	-	750	5% discount for BIS
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	500	5% discount for BIS
11.1 to 11.8, Table No.-3(Heating)	-	2500	5% discount for BIS
13.1, 13.2(Leakage current test)	-	1250	5% discount for BIS
13.3 and Table No.- 4(Electric strength test)	-	1250	5% discount for BIS
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	1250	5% discount for BIS
15.1(Moisture resistance)	-	1500	5% discount for BIS
15.2(Moisture resistance)	-	1500	5% discount for BIS
15.3(Moisture resistance)	-	1500	5% discount for BIS
15.101(Moisture resistance)	-	1500	5% discount for BIS
15.102(Moisture resistance)	-	1500	5% discount for BIS
15.102(Moisture resistance)	-	1500	5% discount for BIS
16.1 & 16.2(Leakage current test)	-	1250	5% discount for BIS
16.3(Electric strength test)	-	1250	5% discount for BIS
16.3(Insulation resistance test)	-	1250	5% discount for BIS
17(Overload protection of transformers and associated circuits)	-	750	5% discount for BIS
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	12500	5% discount for BIS
19.101 and 19.102(ABNORMAL OPERATION)	-	12500	5% discount for BIS
20.1(Stability and mechanical hazards)	-	500	5% discount for BIS
20.2(Stability and mechanical hazards)	-	500	5% discount for BIS
21.1(MECHANICAL STRENGTH)	-	1000	5% discount for BIS
21.2(MECHANICAL STRENGTH)	-	1000	5% discount for BIS
22.1(Constructions)	-	1250	5% discount for BIS
22.2(Constructions)	-	1250	5% discount for BIS
22.3(Constructions)	-	1250	5% discount for BIS
22.4(Constructions)	-	1250	5% discount for BIS
22.5(Constructions)	-	1250	5% discount for BIS
22.6(Constructions)	-	1250	5% discount for BIS
22.7 to 22.10(Constructions)	-	1250	5% discount for BIS
22.11(Constructions)	-	1250	5% discount for BIS
22.11(Constructions)	-	1250	5% discount for BIS
22.12(Constructions)	-	1250	5% discount for BIS
22.13 to 22.48(Constructions)	-	1250	5% discount for BIS
22.101 to 22.114(Constructions)	-	1250	5% discount for BIS
23.1 & 23.2(Internal wiring)	-	500	5% discount for BIS
23.3(Internal wiring)	-	500	5% discount for BIS
23.4(Internal wiring)	-	500	5% discount for BIS
23.5(Internal wiring)	-	500	5% discount for BIS
23.6 to 23.10(Internal wiring)	-	500	1250
23.101 to 23.102(Internal wiring)	-	500	5% discount for BIS
24.1(Components)	-	750	5% discount for BIS
24.2 to 24.6(Components)	-	750	5% discount for BIS
24.101 to 24.103(Components)	-	750	5% discount for BIS
25.1(Supply connection and external flexible cords)	-	500	5% discount for BIS
25.2(Supply connection and external flexible cords)	-	500	5% discount for BIS
25.3(Supply connection and external flexible cords)	-	500	5% discount for BIS
25.4(Supply connection and external flexible cords)	-	500	5% discount for BIS
25.5 to 25.7(Supply connection and external flexible cords)	-	500	5% discount for BIS
25.8, Table No.-11(Supply connection and external flexible cords)	-	500	5% discount for BIS
25.9 to 25.13(Supply connection and external flexible cords)	-	500	5% discount for BIS
25.14(Supply connection and external flexible cords)	-	500	5% discount for BIS
25.15(Supply connection and external flexible cords)	-	500	5% discount for BIS
25.16 to 25.25(Supply connection and external flexible cords)	-	500	5% discount for BIS
26.1 to 26.8(Terminals for external conductors)	-	500	5% discount for BIS
26.9(Terminals for external conductors)	-	500	5% discount for BIS
26.10 & 26.11(Terminals for external conductors)	-	500	5% discount for BIS
27.1 to 27.4(Provision for earthing)	-	500	5% discount for BIS
27.5(Provision for earthing)	-	500	5% discount for BIS
27.6(Provision for earthing)	-	500	5% discount for BIS
28.1, Table No.-14(Screws and connections)	-	750	5% discount for BIS
28.2 to 28.4(Screws and connections)	-	750	5% discount for BIS
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	500	5% discount for BIS
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	500	5% discount for BIS
29.2(Clearances, creepage distances and solid insulation)	-	500	5% discount for BIS
29.2(Clearances, creepage distances and solid insulation)	-	500	5% discount for BIS
29.3(Clearances, creepage distances and solid insulation)	-	500	5% discount for BIS
30.1(Resistance to heat and fire)	-	2000	5% discount for BIS
30.2(Resistance to heat and fire)	-	2000	5% discount for BIS
30.2.4(Resistance to heat and fire)	-	2000	5% discount for BIS
31(Resistance to rusting)	-	750	5% discount for BIS
32(Radiation, toxicity and similar hazards)	-	750	5% discount for BIS
7.1 to 7.13, 7.15, 7.16(Marking)	-	250	5% discount for BIS
7.14(Legibility & Durability of Markings test)	-	250	5% discount for BIS
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	750	5% discount for BIS
8.1.2(Protection against access to live parts)	-	750	5% discount for BIS
8.1.3(Protection against access to live parts)	-	750	5% discount for BIS
8.1.4(Protection against access to live parts)	-	750	5% discount for BIS
8.1.5(Protection against access to live parts)	-	750	5% discount for BIS
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	500	5% discount for BIS
11.1 to 11.8, Table No.-3(Heating)	-	2500	5% discount for BIS
13.1, 13.2(Leakage current test)	-	1250	5% discount for BIS
13.3 and Table No.- 4(Electric strength test)	-	1250	5% discount for BIS
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	1250	5% discount for BIS
15.1(Moisture resistance)	-	1500	5% discount for BIS
15.2(Moisture resistance)	-	1500	5% discount for BIS
15.3(Moisture resistance)	-	1500	5% discount for BIS
15.101(Moisture resistance)	-	1500	5% discount for BIS
15.102(Moisture resistance)	-	1500	5% discount for BIS
15.102(Moisture resistance)	-	1500	5% discount for BIS
16.1 & 16.2(Leakage current test)	-	1250	5% discount for BIS
16.3(Electric strength test)	-	1250	5% discount for BIS
16.3(Insulation resistance test)	-	1250	5% discount for BIS
17(Overload protection of transformers and associated circuits)	-	750	5% discount for BIS
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	12500	5% discount for BIS
19.101 and 19.102(ABNORMAL OPERATION)	-	12500	5% discount for BIS
20.1(Stability and mechanical hazards)	-	500	5% discount for BIS
20.2(Stability and mechanical hazards)	-	500	5% discount for BIS
21.1(MECHANICAL STRENGTH)	-	1000	5% discount for BIS
21.2(MECHANICAL STRENGTH)	-	1000	5% discount for BIS
22.1(Constructions)	-	1250	5% discount for BIS
22.2(Constructions)	-	1250	5% discount for BIS
22.3(Constructions)	-	1250	5% discount for BIS
22.4(Constructions)	-	1250	5% discount for BIS
22.5(Constructions)	-	1250	5% discount for BIS
22.6(Constructions)	-	1250	5% discount for BIS
22.7 to 22.10(Constructions)	-	1250	5% discount for BIS
22.11(Constructions)	-	1250	5% discount for BIS
22.11(Constructions)	-	1250	5% discount for BIS
22.12(Constructions)	-	1250	5% discount for BIS
22.13 to 22.48(Constructions)	-	1250	5% discount for BIS
22.101 to 22.114(Constructions)	-	1250	5% discount for BIS
23.1 & 23.2(Internal wiring)	-	500	5% discount for BIS
23.3(Internal wiring)	-	500	5% discount for BIS
23.4(Internal wiring)	-	500	5% discount for BIS
23.5(Internal wiring)	-	500	5% discount for BIS
23.6 to 23.10(Internal wiring)	-	500	5% discount for BIS
23.101 to 23.102(Internal wiring)	-	500	5% discount for BIS
24.1(Components)	-	750	5% discount for BIS
24.2 to 24.6(Components)	-	750	5% discount for BIS
24.101 to 24.103(Components)	-	750	5% discount for BIS
25.1(Supply connection and external flexible cords)	-	500	5% discount for BIS
25.2(Supply connection and external flexible cords)	-	500	5% discount for BIS
25.3(Supply connection and external flexible cords)	-	500	5% discount for BIS
25.4(Supply connection and external flexible cords)	-	500	5% discount for BIS
25.5 to 25.7(Supply connection and external flexible cords)	-	500	5% discount for BIS
25.8, Table No.-11(Supply connection and external flexible cords)	-	500	5% discount for BIS
25.9 to 25.13(Supply connection and external flexible cords)	-	500	5% discount for BIS
25.14(Supply connection and external flexible cords)	-	500	5% discount for BIS
25.15(Supply connection and external flexible cords)	-	500	5% discount for BIS
25.16 to 25.25(Supply connection and external flexible cords)	-	500	5% discount for BIS
26.1 to 26.8(Terminals for external conductors)	-	500	5% discount for BIS
26.9(Terminals for external conductors)	-	500	5% discount for BIS
26.10 & 26.11(Terminals for external conductors)	-	500	5% discount for BIS
27.1 to 27.4(Provision for earthing)	-	500	5% discount for BIS
27.5(Provision for earthing)	-	500	5% discount for BIS
27.6(Provision for earthing)	-	500	5% discount for BIS
28.1, Table No.-14(Screws and connections)	-	750	5% discount for BIS
28.2 to 28.4(Screws and connections)	-	750	5% discount for BIS
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	500	5% discount for BIS
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	500	5% discount for BIS
29.2(Clearances, creepage distances and solid insulation)	-	500	5% discount for BIS
29.2(Clearances, creepage distances and solid insulation)	-	500	5% discount for BIS
29.3(Clearances, creepage distances and solid insulation)	-	500	5% discount for BIS
30.1(Resistance to heat and fire)	-	2000	5% discount for BIS
30.2(Resistance to heat and fire)	-	2000	5% discount for BIS
30.2.4(Resistance to heat and fire)	-	2000	5% discount for BIS
31(Resistance to rusting)	-	750	5% discount for BIS
32(Radiation, toxicity and similar hazards)	-	750	5% discount for BIS
7.1 to 7.13, 7.15, 7.16(Marking)	-	0	-
7.14(Legibility & Durability of Markings test)	-	0	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	0	-
8.1.2(Protection against access to live parts)	-	0	-
8.1.3(Protection against access to live parts)	-	0	-
8.1.4(Protection against access to live parts)	-	0	-
8.1.5(Protection against access to live parts)	-	0	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	0	-
11.1 to 11.8, Table No.-3(Heating)	-	0	-
13.1, 13.2(Leakage current test)	-	0	-
13.3 and Table No.- 4(Electric strength test)	-	0	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	0	-
15.1(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.101(Moisture resistance)	-	0	-
15.102(Moisture resistance)	-	0	-
15.102(Moisture resistance)	-	0	-
16.1 & 16.2(Leakage current test)	-	0	-
16.3(Electric strength test)	-	0	-
16.3(Insulation resistance test)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	0	-
19.101 and 19.102(ABNORMAL OPERATION)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
20.2(Stability and mechanical hazards)	-	0	-
21.1(MECHANICAL STRENGTH)	-	0	-
21.2(MECHANICAL STRENGTH)	-	0	-
22.1(Constructions)	-	0	-
22.2(Constructions)	-	0	-
22.3(Constructions)	-	0	-
22.4(Constructions)	-	0	-
22.5(Constructions)	-	0	-
22.6(Constructions)	-	0	-
22.7 to 22.10(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.12(Constructions)	-	0	-
22.13 to 22.48(Constructions)	-	0	-
22.101 to 22.114(Constructions)	-	0	-
23.1 & 23.2(Internal wiring)	-	0	-
23.3(Internal wiring)	-	0	-
23.4(Internal wiring)	-	0	-
23.5(Internal wiring)	-	0	-
23.6 to 23.10(Internal wiring)	-	0	-
23.101 to 23.102(Internal wiring)	-	0	-
25.1(Supply connection and external flexible cords)	-	0	-
25.2(Supply connection and external flexible cords)	-	0	-
25.3(Supply connection and external flexible cords)	-	0	-
25.4(Supply connection and external flexible cords)	-	0	-
25.5 to 25.7(Supply connection and external flexible cords)	-	0	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	0	-
25.9 to 25.13(Supply connection and external flexible cords)	-	0	-
25.14(Supply connection and external flexible cords)	-	0	-
25.15(Supply connection and external flexible cords)	-	0	-
25.16 to 25.25(Supply connection and external flexible cords)	-	0	-
26.1 to 26.8(Terminals for external conductors)	-	0	-
26.9(Terminals for external conductors)	-	0	-
26.10 & 26.11(Terminals for external conductors)	-	0	-
27.1 to 27.4(Provision for earthing)	-	0	-
27.5(Provision for earthing)	-	0	-
27.6(Provision for earthing)	-	0	-
28.1, Table No.-14(Screws and connections)	-	0	-
28.2 to 28.4(Screws and connections)	-	0	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	-
29.2(Clearances, creepage distances and solid insulation)	-	0	-
29.2(Clearances, creepage distances and solid insulation)	-	0	-
29.3(Clearances, creepage distances and solid insulation)	-	0	-
30.1(Resistance to heat and fire)	-	0	-
30.2(Resistance to heat and fire)	-	0	-
30.2.4(Resistance to heat and fire)	-	0	-
31(Resistance to rusting)	-	0	-
32(Radiation, toxicity and similar hazards)	-	0	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	0	-
7.14(Legibility & Durability of Markings test)	-	0	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	0	-
8.1.2(Protection against access to live parts)	-	0	-
8.1.3(Protection against access to live parts)	-	0	-
8.1.4(Protection against access to live parts)	-	0	-
8.1.5(Protection against access to live parts)	-	0	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	0	-
11.1 to 11.8, Table No.-3(Heating)	-	0	-
13.1, 13.2(Leakage current test)	-	0	-
13.3 and Table No.- 4(Electric strength test)	-	0	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	0	-
15.1(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.101(Moisture resistance)	-	0	-
15.102(Moisture resistance)	-	0	-
15.102(Moisture resistance)	-	0	-
16.1 & 16.2(Leakage current test)	-	0	-
16.3(Electric strength test)	-	0	-
16.3(Insulation resistance test)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	0	-
19.101 and 19.102(ABNORMAL OPERATION)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
20.2(Stability and mechanical hazards)	-	0	-
21.1(MECHANICAL STRENGTH)	-	0	-
21.2(MECHANICAL STRENGTH)	-	0	-
22.1(Constructions)	-	0	-
22.2(Constructions)	-	0	-
22.3(Constructions)	-	0	-
22.4(Constructions)	-	0	-
22.5(Constructions)	-	0	-
22.6(Constructions)	-	0	-
22.7 to 22.10(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.12(Constructions)	-	0	-
22.13 to 22.48(Constructions)	-	0	-
22.101 to 22.114(Constructions)	-	0	-
23.1 & 23.2(Internal wiring)	-	0	-
23.3(Internal wiring)	-	0	-
23.4(Internal wiring)	-	0	-
23.5(Internal wiring)	-	0	-
23.6 to 23.10(Internal wiring)	-	0	-
23.101 to 23.102(Internal wiring)	-	0	-
25.1(Supply connection and external flexible cords)	-	0	-
25.2(Supply connection and external flexible cords)	-	0	-
25.3(Supply connection and external flexible cords)	-	0	-
25.4(Supply connection and external flexible cords)	-	0	-
25.5 to 25.7(Supply connection and external flexible cords)	-	0	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	0	-
25.9 to 25.13(Supply connection and external flexible cords)	-	0	-
25.14(Supply connection and external flexible cords)	-	0	-
25.15(Supply connection and external flexible cords)	-	0	-
25.16 to 25.25(Supply connection and external flexible cords)	-	0	-
26.1 to 26.8(Terminals for external conductors)	-	0	-
26.9(Terminals for external conductors)	-	0	-
26.10 & 26.11(Terminals for external conductors)	-	0	-
27.1 to 27.4(Provision for earthing)	-	0	-
27.5(Provision for earthing)	-	0	-
27.6(Provision for earthing)	-	0	-
28.1, Table No.-14(Screws and connections)	-	0	-
28.2 to 28.4(Screws and connections)	-	0	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	-
29.2(Clearances, creepage distances and solid insulation)	-	0	-
29.2(Clearances, creepage distances and solid insulation)	-	0	-
29.3(Clearances, creepage distances and solid insulation)	-	0	-
30.1(Resistance to heat and fire)	-	0	-
30.2(Resistance to heat and fire)	-	0	-
30.2.4(Resistance to heat and fire)	-	0	-
31(Resistance to rusting)	-	0	-
32(Radiation, toxicity and similar hazards)	-	0	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	0	-
7.14(Legibility & Durability of Markings test)	-	0	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	0	-
8.1.2(Protection against access to live parts)	-	0	-
8.1.3(Protection against access to live parts)	-	0	-
8.1.4(Protection against access to live parts)	-	0	-
8.1.5(Protection against access to live parts)	-	0	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	0	-
11.1 to 11.8, Table No.-3(Heating)	-	0	-
13.1, 13.2(Leakage current test)	-	0	-
13.3 and Table No.- 4(Electric strength test)	-	0	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	0	-
15.1(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.101(Moisture resistance)	-	0	-
15.102(Moisture resistance)	-	0	-
15.102(Moisture resistance)	-	0	-
16.1 & 16.2(Leakage current test)	-	0	-
16.3(Electric strength test)	-	0	-
16.3(Insulation resistance test)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	0	-
19.101 and 19.102(ABNORMAL OPERATION)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
20.2(Stability and mechanical hazards)	-	0	-
21.1(MECHANICAL STRENGTH)	-	0	-
21.2(MECHANICAL STRENGTH)	-	0	-
22.1(Constructions)	-	0	-
22.2(Constructions)	-	0	-
22.3(Constructions)	-	0	-
22.4(Constructions)	-	0	-
22.5(Constructions)	-	0	-
22.6(Constructions)	-	0	-
22.7 to 22.10(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.12(Constructions)	-	0	-
22.13 to 22.48(Constructions)	-	0	-
22.101 to 22.114(Constructions)	-	0	-
23.1 & 23.2(Internal wiring)	-	0	-
23.3(Internal wiring)	-	0	-
23.4(Internal wiring)	-	0	-
23.5(Internal wiring)	-	0	-
23.6 to 23.10(Internal wiring)	-	0	-
23.101 to 23.102(Internal wiring)	-	0	-
25.1(Supply connection and external flexible cords)	-	0	-
25.2(Supply connection and external flexible cords)	-	0	-
25.3(Supply connection and external flexible cords)	-	0	-
25.4(Supply connection and external flexible cords)	-	0	-
25.5 to 25.7(Supply connection and external flexible cords)	-	0	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	0	-
25.9 to 25.13(Supply connection and external flexible cords)	-	0	-
25.14(Supply connection and external flexible cords)	-	0	-
25.15(Supply connection and external flexible cords)	-	0	-
25.16 to 25.25(Supply connection and external flexible cords)	-	0	-
26.1 to 26.8(Terminals for external conductors)	-	0	-
26.9(Terminals for external conductors)	-	0	-
26.10 & 26.11(Terminals for external conductors)	-	0	-
27.1 to 27.4(Provision for earthing)	-	0	-
27.5(Provision for earthing)	-	0	-
27.6(Provision for earthing)	-	0	-
28.1, Table No.-14(Screws and connections)	-	0	-
28.2 to 28.4(Screws and connections)	-	0	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	-
29.2(Clearances, creepage distances and solid insulation)	-	0	-
29.2(Clearances, creepage distances and solid insulation)	-	0	-
29.3(Clearances, creepage distances and solid insulation)	-	0	-
30.1(Resistance to heat and fire)	-	0	-
30.2(Resistance to heat and fire)	-	0	-
30.2.4(Resistance to heat and fire)	-	0	-
31(Resistance to rusting)	-	0	-
32(Radiation, toxicity and similar hazards)	-	0	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	0	-
7.14(Legibility & Durability of Markings test)	-	0	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	0	-
8.1.2(Protection against access to live parts)	-	0	-
8.1.3(Protection against access to live parts)	-	0	-
8.1.4(Protection against access to live parts)	-	0	-
8.1.5(Protection against access to live parts)	-	0	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	0	-
11.1 to 11.8, Table No.-3(Heating)	-	0	-
13.1, 13.2(Leakage current test)	-	0	-
13.3 and Table No.- 4(Electric strength test)	-	0	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	0	-
15.1(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.101(Moisture resistance)	-	0	-
15.102(Moisture resistance)	-	0	-
15.102(Moisture resistance)	-	0	-
16.1 & 16.2(Leakage current test)	-	0	-
16.3(Electric strength test)	-	0	-
16.3(Insulation resistance test)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	0	-
19.101 and 19.102(ABNORMAL OPERATION)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
20.2(Stability and mechanical hazards)	-	0	-
21.1(MECHANICAL STRENGTH)	-	0	-
21.2(MECHANICAL STRENGTH)	-	0	-
22.1(Constructions)	-	0	-
22.2(Constructions)	-	0	-
22.3(Constructions)	-	0	-
22.4(Constructions)	-	0	-
22.5(Constructions)	-	0	-
22.6(Constructions)	-	0	-
22.7 to 22.10(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.12(Constructions)	-	0	-
22.13 to 22.48(Constructions)	-	0	-
22.101 to 22.114(Constructions)	-	0	-
23.1 & 23.2(Internal wiring)	-	0	-
23.3(Internal wiring)	-	0	-
23.4(Internal wiring)	-	0	-
23.5(Internal wiring)	-	0	-
23.6 to 23.10(Internal wiring)	-	0	-
23.101 to 23.102(Internal wiring)	-	0	-
25.1(Supply connection and external flexible cords)	-	0	-
25.2(Supply connection and external flexible cords)	-	0	-
25.3(Supply connection and external flexible cords)	-	0	-
25.4(Supply connection and external flexible cords)	-	0	-
25.5 to 25.7(Supply connection and external flexible cords)	-	0	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	0	-
25.9 to 25.13(Supply connection and external flexible cords)	-	0	-
25.14(Supply connection and external flexible cords)	-	0	-
25.15(Supply connection and external flexible cords)	-	0	-
25.16 to 25.25(Supply connection and external flexible cords)	-	0	-
26.1 to 26.8(Terminals for external conductors)	-	0	-
26.9(Terminals for external conductors)	-	0	-
26.10 & 26.11(Terminals for external conductors)	-	0	-
27.1 to 27.4(Provision for earthing)	-	0	-
27.5(Provision for earthing)	-	0	-
27.6(Provision for earthing)	-	0	-
28.1, Table No.-14(Screws and connections)	-	0	-
28.2 to 28.4(Screws and connections)	-	0	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	-
29.2(Clearances, creepage distances and solid insulation)	-	0	-
29.2(Clearances, creepage distances and solid insulation)	-	0	-
29.3(Clearances, creepage distances and solid insulation)	-	0	-
30.1(Resistance to heat and fire)	-	0	-
30.2(Resistance to heat and fire)	-	0	-
30.2.4(Resistance to heat and fire)	-	0	-
31(Resistance to rusting)	-	0	-
32(Radiation, toxicity and similar hazards)	-	0	-
19.11.4.1(Electrostatic discharges)	-	12500	-
19.11.4.2(Radiated fields)	-	12500	-
19.11.4.3(Fast transient bursts)	-	12500	-
19.11.4.4(Surge immunity test)	-	12500	-
19.11.4.5(Immunity to conducted discharges)	-	12500	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	12500	-
19.11.4.7(Harmonics)	-	12500	-

Complete

19 Mar, 2023

IS/IEC 60669 : Part 2 : Sec 1 (2021)

Switches for household and Similar fixed electrical installations Part 2-1: particular requirements electronic control devices

75000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General requirements)	-	0	-
Cl-5(General remarks on tests)	-	0	-
Cl-6(Ratings)	-	0	-
Cl-7(Classification)	-	0	Qualitative
Cl-8(Marking)	-	0	Qualitative
Cl-9(Checking of dimensions)	-	500	5% discount for BIS
Cl-10(Protection against electrical shock)	-	1000	5% discount for BIS
10.101(Requirements for fuse replacement or adjustment of control setting)	-	1000	5% discount for BIS
10.102(Ventilation openings)	-	1000	5% discount for BIS
10.103(SELV, PELV or FELV circuits)	-	1000	5% discount for BIS
Cl-11(Provision for earthing)	-	1000	5% discount for BIS
11.101(Protective earthing continuity via printed circuit boards)	-	1000	5% discount for BIS
Cl-12(Terminals)	-	1000	5% discount for BIS
Cl-13(Constructional requirements)	-	2500	5% discount for BIS
Cl-14(Mechanism)	-	2500	5% discount for BIS
Cl-15(Resistance to ageing, protection provided by enclosures of switches and resistance to humidity)	-	5000	5% discount for BIS
Cl-16(Insulation resistance and electric strength)	-	2500	5% discount for BIS
Cl-17(Temperature rise)	-	2500	5% discount for BIS
Cl-18(Making and breaking capacity)	-	5000	5% discount for BIS
Cl-19(Normal operation)	-	1500	5% discount for BIS
Cl-20(Mechanical strength)	-	1500	5% discount for BIS
Cl-21(Resistance to heat)	-	2000	5% discount for BIS
Cl-22(Screws, current-carrying parts and connections)	-	1000	5% discount for BIS
Cl-23(Creepage distances, clearances and distances through sealing compound)	-	1000	5% discount for BIS
Cl-23.101(Use of enamel wires)	-	1000	5% discount for BIS
Cl-24(Resistance of insulating material to abnormal heat, to fire and to tracking)	-	2500	5% discount for BIS
Cl-25(Resistance to rusting)	-	2500	5% discount for BIS
26.2.2(Voltage dips and short interruptions)	-	37500	5% discount for BIS
26.2.3(Surge)	-	37500	5% discount for BIS
26.2.4(Fast transients (burst))	-	37500	5% discount for BIS
26.2.5(Electrostatic discharge)	-	37500	5% discount for BIS
26.2.6(Radiated electromagnetic field test)	-	37500	5% discount for BIS
26.2.7(Radio frequency voltage)	-	37500	5% discount for BIS
26.2.8(Power frequency magnetic field test)	-	37500	5% discount for BIS
26.3.1(Low-frequency emission)	-	37500	5% discount for BIS
26.3.2(Conducted radio-frequency emission on main, load/or control terminal)	-	37500	5% discount for BIS
26.3.3(Conducted radio frequency emission 0,15 MHz to 30 MHz on TP media and communications terminals)	-	37500	5% discount for BIS
26.3.4(Radiated radio frequency emission above 30 MHz)	-	37500	5% discount for BIS
Cl-101(Abnormal conditions)	-	2000	5% discount for BIS
Cl-102(Components)	-	0	-
Cl-103(Electromagnetic fields (EMF))	-	0	-
Cl-10.104(Protection from touch current)	-	1000	5% discount for BIS

Complete

19 Mar, 2023

IS 302 : Part 2 : Sec 11 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 11 tumbler dryers

22500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(GENERAL REQUIREMENT)	-	0	-
4(GENERAL NOTES ON TESTS)	-	0	-
5(RATING)	-	100	5% discount for BIS
6(CLASSIFICATION)	-	100	5% discount for BIS
7(MARKING)	-	100	5% discount for BIS
8(PROTECTION AGAINST ELECTRIC SHOCK)	-	500	5% discount for BIS
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	1000	5% discount for BIS
10(INPUT AND CURRENT)	-	700	5% discount for BIS
11(HEATING)	-	1000	5% discount for BIS
12(OPERATION TJNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS)	-	0	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	1500	5% discount for BIS
14(RADIO AND TELEVISION INTERFERENCE SUPPRESSION)	-	1250	5% discount for BIS
15(MOISTURE RESISTANCE)	-	3000	5% discount for BIS
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	1500	5% discount for BIS
17(OVERLOAD PROTECTION)	-	500	5% discount for BIS
18(ENDURANCE )	-	0	5% discount for BIS
19(ABNORMAL OPERATION)	-	2500	5% discount for BIS
20(STABILITY AND MECHANICAL HAZARDS)	-	750	5% discount for BIS
21(MECHANICAL STRENGTH)	-	750	5% discount for BIS
22(CONSTRUCTION)	-	1250	5% discount for BIS
23(INTERNAL WIRING)	-	500	5% discount for BIS
24(COMPONENTS)	-	500	5% discount for BIS
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	750	5% discount for BIS
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	500	5% discount for BIS
27(PROVISION FOR EARTHING)	-	500	5% discount for BIS
28(SCREWS AND CONNECTIONS)	-	500	5% discount for BIS
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	500	5% discount for BIS
30(RESISTANCE TO HEAT, FIRE AND TACKING)	-	750	5% discount for BIS
31(RESISTANCE TO RUSTING)	-	750	5% discount for BIS
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	750	5% discount for BIS
101.1(Type Tests)	-	0	-
101.2(Acceptance Tests)	-	0	-
101.3(Routine Tests)	-	0	-
3(GENERAL REQUIREMENT)	-	0	-
4(GENERAL NOTES ON TESTS)	-	0	-
5(RATING)	-	0	-
6(CLASSIFICATION)	-	0	-
7(MARKING)	-	0	-
8(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	0	-
10(INPUT AND CURRENT)	-	0	-
11(HEATING)	-	0	-
12(OPERATION TJNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS)	-	0	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	0	-
14(RADIO AND TELEVISION INTERFERENCE SUPPRESSION)	-	0	-
15(MOISTURE RESISTANCE)	-	0	-
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	-
17(OVERLOAD PROTECTION)	-	0	-
18(ENDURANCE )	-	0	-
19(ABNORMAL OPERATION)	-	0	-
20(STABILITY AND MECHANICAL HAZARDS)	-	0	-
21(MECHANICAL STRENGTH)	-	0	-
22(CONSTRUCTION)	-	0	-
23(INTERNAL WIRING)	-	0	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	0	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
27(PROVISION FOR EARTHING)	-	0	-
28(SCREWS AND CONNECTIONS)	-	0	-
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	0	-
30(RESISTANCE TO HEAT, FIRE AND TACKING)	-	0	-
31(RESISTANCE TO RUSTING)	-	0	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	0	-
101.1(Type Tests)	-	0	-
101.2(Acceptance Tests)	-	0	-
101.3(Routine Tests)	-	0	-

Complete

19 Mar, 2023

IS 15885 : PART 2 : SEC 9 (2011)

Safety of lamp control gear: Part 2 particular requirements: Sec 9 ballasts for discharge lamps (Excluding Fluorescent Lamps)

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
21(Resistance to Corrosion)	-	5200	5% discount for BIS
20(Resistance to heat, fire and tracking )	-	6500	5% discount for BIS
19(Screws, current-carrying parts and Connections )	-	2000	5% discount for BIS
18(Creepage distances and Clearance )	-	1000	5% discount for BIS
17(Construction)	-	3000	5% discount for BIS
16(Fault Conditions)	-	2000	5% discount for BIS
15(High Voltage Impulse Testing)	-	2000	5% discount for BIS
14(Ballast Heating)	-	5000	5% discount for BIS
13(Thermal endurance test for windings )	-	8000	5% discount for BIS
12(Electric strength)	-	2000	5% discount for BIS
11(Moisture resistance and insulation)	-	10000	5% discount for BIS
10(Provisions for earthing)	-	1000	5% discount for BIS
9(Terminals)	-	1000	5% discount for BIS
8(Protection against accidental contact with live parts)	-	1000	5% discount for BIS
7(Marking)	-	200	5% discount for BIS
6(Classification)	-	100	5% discount for BIS

Complete

19 Mar, 2023

IS 15885 : PART 2 : SEC 8 (2011)

Safety of lamp control gear: Part 2 particular requirements: Sec 8 ballasts for fluorescent lamps

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
21(Resistance to Corrosion)	-	5200	5% discount for BIS
20(Resistance to heat, fire and tracking )	-	6500	5% discount for BIS
19(Screws, current-carrying parts and Connections )	-	2000	5% discount for BIS
18(Creepage distances and Clearance )	-	1000	5% discount for BIS
17(Construction)	-	3000	5% discount for BIS
16(Fault Conditions)	-	2000	5% discount for BIS
15(High Voltage Impulse Testing)	-	2000	5% discount for BIS
14(Ballast Heating)	-	5000	5% discount for BIS
13(Thermal endurance test for windings )	-	8000	5% discount for BIS
12(Electric strength)	-	2000	5% discount for BIS
11(Moisture resistance and insulation)	-	10000	5% discount for BIS
10(Provisions for earthing)	-	1000	5% discount for BIS
9(Terminals)	-	1000	5% discount for BIS
8(Protection against accidental contact with live parts)	-	1000	5% discount for BIS
7(Marking)	-	200	5% discount for BIS
6(Classification)	-	1000	5% discount for BIS

Complete

19 Mar, 2023

IS 15885 : PART 2 : SEC 3 (2011)

Safety of lamp control gear: Part 2 particular requirements: Sec 3 ac supplied electronic ballasts for fluorescent lamps

42000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
21(Resistance to Corrosion)	-	5200	5% discount for BIS
20(Resistance to heat, fire and tracking )	-	2500	5% discount for BIS
19(Screws, current-carrying parts and Connections )	-	2000	5% discount for BIS
18(Creepage distances and Clearance )	-	1000	5% discount for BIS
17(Construction)	-	3000	5% discount for BIS
16(Abnormal Condition)	-	7000	5% discount for BIS
15(Protection of associated Components)	-	3000	5% discount for BIS
14(Fault Conditions)	-	2000	5% discount for BIS
13(Thermal endurance test for windings )	-	5000	5% discount for BIS
12(Electric strength)	-	2000	5% discount for BIS
11(Moisture resistance and insulation)	-	5000	5% discount for BIS
10(Provisions for earthing)	-	1000	5% discount for BIS
9(Terminals)	-	1000	5% discount for BIS
8(Protection against accidental contact with live parts)	-	1000	5% discount for BIS
7(Marking)	-	200	5% discount for BIS
6(Classification)	-	100	5% discount for BIS

Complete

19 Mar, 2023

IS 15885 : PART 2 : SEC 1 (2011)

Safety of lamp control gear: Part 2 particular requirements: Sec 1 starting devices (Other Than Glow Starters)

50050 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
22(Resistance to Corrosion)	-	5200	5% discount for BIS
21(Resistance to heat, fire and tracking)	-	6500	5% discount for BIS
20(Screws, current-carrying parts and Connections)	-	3000	5% discount for BIS
19(Creepage distances and Clearance )	-	1000	5% discount for BIS
18(Construction)	-	3000	5% discount for BIS
17(Mechanical Strength)	-	1000	5% discount for BIS
16(Pulse Voltage of Ignitors)	-	7000	5% discount for BIS
15(Heating of independent starting Devices)	-	3000	5% discount for BIS
14(Fault Conditions)	-	2000	5% discount for BIS
13(Thermal endurance test for windings )	-	8000	5% discount for BIS
12(Electric strength)	-	2000	5% discount for BIS
11(Moisture resistance and insulation)	-	5000	5% discount for BIS
10(Provisions for earthing)	-	1000	5% discount for BIS
9(Terminals)	-	1000	5% discount for BIS
8(Protection against accidental contact with live parts)	-	1000	5% discount for BIS
7(Marking)	-	250	5% discount for BIS
6(Classification)	-	100	5% discount for BIS

Complete

19 Mar, 2023

IS 15882 (2009)

Ballasts for discharge lamps (Excluding Tubular Fluorescent Lamps) - Performance requirements

42500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
15(Electrical requirements for Ballasts for high-pressure sodium Vapour lamps)	-	5000	5% discount for BIS
14(Electrical requirements for Ballasts for metal halide lamps)	-	5000	5% discount for BIS
13(Electrical requirements for Ballasts for low-pressure sodium Vapour lamps)	-	5000	5% discount for BIS
12(Electrical requirements for ballasts For high-pressure mercury)	-	5000	5% discount for BIS
11(Ignitors)	-	12500	5% discount for BIS
10(Magnetic Screening)	-	2250	5% discount for BIS
9(Current Waveform)	-	3000	5% discount for BIS
8(Supply Current)	-	2500	5% discount for BIS
7(Circuit Power factor)	-	1500	5% discount for BIS
6(Ballasts designed to operate various supply voltages)	-	500	5% discount for BIS
5(Marking)	-	250	5% discount for BIS

Complete

19 Mar, 2023

IS 15518 : Part 1 (2004)

Safety requirements for incandescent lamps: Part 1 tungsten filament lamps for domestic and similar general lighting purposes

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.1(Mandatory Markings)	-	100	5% discount to BIS
4.2.2(Standard Mark)	-	100	5% discount to BIS
4.2.3(Dichroic Reflectorized (Cool Beam) Lamps and Bowl Mirror Lamps)	-	100	5% discount to BIS
4.2.4(Lamps with Operating Positions Limitations)	-	100	5% discount to BIS
4.3, Table 1(Lamp Cap)	-	800	5% discount to BIS
4.3, Table 1(Gauge)	-	800	5% discount to BIS
4.3.1(E14 Capped Lamps)	-	800	5% discount to BIS
4.4.1(Average Cap Temperature Rise)	-	5000	5% discount to BIS
4.4.2(Compliance)	-	5000	5% discount to BIS
4.4.1, 4.4.2, Table 2(Group Number)	-	5000	5% discount to BIS
4.4.1, 4.4.2, Table 2(Wattage (Note 1))	-	5000	5% discount to BIS
4.4.1, 4.4.2, Table 2(Bulb Shape)	-	5000	5% discount to BIS
4.4.1, 4.4.2, Table 2(t3, B15d)	-	5000	5% discount to BIS
4.4.1, 4.4.2, Table 2(t3, B22d)	-	5000	5% discount to BIS
4.4.1, 4.4.2, Table 2(t3, E12)	-	5000	5% discount to BIS
4.4.1, 4.4.2, Table 2(t3, E14)	-	5000	5% discount to BIS
4.4.1, 4.4.2, Table 2(t3, E27)	-	5000	5% discount to BIS
4.4.3(Batch Testing)	-	5000	5% discount to BIS
4.5.1(Resistance to Torque, Caps)	-	1000	5% discount to BIS
4.5.2(Resistance to Torque, Unused Lamps)	-	1000	5% discount to BIS
4.5.2, Table 3(Cap type)	-	1000	5% discount to BIS
4.5.2, Table 3(Torque Value)	-	1000	5% discount to BIS
4.5.3(Resistance to Heat)	-	1000	5% discount to BIS
4.5.3, Table 4(Cap type)	-	5000	5% discount to BIS
4.5.3, Table 4(Torque Value)	-	1000	5% discount to BIS
4.5.4(Heating Treatment Temperatures)	-	1000	5% discount to BIS
4.6(Insulation Resistance of B15d, B22d and E27/51 × 39 Capped Lamps and Other Lamps having Insulated Skirts)	-	1000	5% discount to BIS
4.7.1(Metal Parts Intended to be Insulated from Live Parts)	-	1100	5% discount to BIS
4.7.2(Bayonet Caps)	-	1100	5% discount to BIS
4.7.3(Edison Screw Caps)	-	1100	5% discount to BIS
4.8(Creepage Distances for B15d and B22d Capped Lamps)	-	500	5% discount to BIS
4.9(Safety at End of Life)	-	10000	5% discount to BIS
4.1(Interchangeability)	-	1000	5% discount to BIS
4.10, Table 5(Lamp Cap)	-	1000	5% discount to BIS
4.10, Table 5(Cap Dimensions to be Checked by the Gauges)	-	1000	5% discount to BIS
4.10, Table 5(Data Sheet)	-	1000	5% discount to BIS

Complete

19 Mar, 2023

IS 13021 : Part 2 (1991)

AC supplied electronic ballasts for tubular fluorescent lamps - Specification: Part 2 performance requirements

34000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(mandatory markings:)	-	500	5% discount for BIS
5.2(addition to the mandatory marking)	-	500	5% discount for BIS
5.3(Non-mandatory information)	-	500	5% discount for BIS
5.4(BIS Standard Mark)	-	500	5% discount for BIS
6.1(GENERAL STATEMENT)	-	250	5% discount for BIS
7.0(STARTING CONDITIONS)	-	1000	5% discount for BIS
7.1(Ballast for Current Controlled Preheat Starting Mode)	-	1000	5% discount for BIS
7.2(Ballasts for Voltage-Controlled Preheat Starting Mode)	-	1000	5% discount for BIS
7.3(Ballast for Non-preheat Starting Mode)	-	1000	5% discount for BIS
7.3.1(Open Circuit Voltage)	-	1000	5% discount for BIS
7.3.2(Ballast Impedance Test)	-	1000	5% discount for BIS
7.3.3(Cathode Current)	-	1000	5% discount for BIS
7.4(Starting Aid and Distances)	-	1000	5% discount for BIS
8.1(ballast lumen factor)	-	3500	5% discount for BIS
8.2(total circuit power)	-	3500	5% discount for BIS
8.3(Requirements for dimming)	-	3500	5% discount for BIS
9.1(CIRCUIT POWER FACTOR)	-	2000	5% discount for BIS
10.1(SUPPLY CURRENT)	-	2000	5% discount for BIS
11.1(MAXIMUM CURRENT IN ANY LEAD TO A CATHODE)	-	3000	5% discount for BIS
12.1, 12.1.1, 12.1.5, Table 1(Harmonic Order)	-	2750	5% discount for BIS
12.1, 12.1.1, 12.1.5, Table 1(Maximum Value Expressed as a% of the Fundamental Current of the Luminaire)	-	2750	5% discount for BIS
12.1.2(Luminaire)	-	2750	5% discount for BIS
12.1.4, Table 2(Harmonic Order)	-	2750	5% discount for BIS
12.1.4, Table 2(Maximum Value Expressed as a% of the Fundamental Current of the Luminaire)	-	2750	5% discount for BIS
12.2(Lamp Operating Current Waveform)	-	2750	5% discount for BIS
13.1(MAGNETIC SCREENING)	-	1500	5% discount for BIS
14.1(Impedance fo Audio-Frequencies)	-	2500	5% discount for BIS
15.1(MAINS TRANSIENT OVERVOLTAGE)	-	3000	5% discount for BIS
16.1(Removal of Lamp(s))	-	5000	5% discount for BIS
16.2(Lamp Fails to Start)	-	5000	5% discount for BIS
17.0(ENDURANCE)	-	7000	5% discount for BIS

Complete

19 Mar, 2023

IS 12449 : Part 2 (1988)

Specification For starting devices (Other Than Glow Starters) : Part 2 performance requirements

42500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.4(Resistance to dust and moisture)	-	21000	5% discount for BIS
6.3(Construction)	-	21000	5% discount for BIS
6.2(Provisions for protective earthing)	-	21000	5% discount for BIS
5.4(Terminals)	-	21000	5% discount for BIS
5.3(Protection against accidental contact with live parts)	-	21000	5% discount for BIS
5.2(Marking)	-	21000	5% discount for BIS
4(Classification )	-	500	5% discount for BIS

Complete

19 Mar, 2023

IS 12449 : Part 1 (1988)

Specification For starting devices (Other Than Glow Starters) : Part 1 general and safety requirements

55000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
20(Resistance to Corrosion)	-	5250	5% discount for BIS
19(Resistance to heat, fire and tracking)	-	6500	5% discount for BIS
18(Creepage distances and Clearance )	-	1000	5% discount for BIS
17(Screws, current-carrying parts and Connections)	-	2000	5% discount for BIS
16(Mechanical Strength)	-	5000	5% discount for BIS
15(Pulse Voltage of Ignitors)	-	2500	5% discount for BIS
14(Heating of independent starting Devices)	-	7000	5% discount for BIS
13(Fault Conditions)	-	3000	5% discount for BIS
12(Insulation resistance and Electric strength)	-	10000	5% discount for BIS
11(Resistance to dust and moisture)	-	8000	5% discount for BIS
10(Construction)	-	1500	5% discount for BIS
9(Provisions for protective earthing)	-	1000	5% discount for BIS
8(Terminals)	-	1000	5% discount for BIS
7(Protection against accidental contact with live parts)	-	1000	5% discount for BIS
6(Marking)	-	250	5% discount for BIS
5(Classification )	-	0	-

Complete

19 Mar, 2023

IS 9974 : Part 1 (1981)

Specification for high pressure sodium vapour lamps: Part 1 general requirements and tests

55000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(MARKING : Mark of origin)	-	400	5% discount for BIS
5.1(MARKING : Rated wattage; )	-	400	5% discount for BIS
5.1(MARKING : Country of manufacture; )	-	400	5% discount for BIS
5.1(MARKING : Lamp designation )	-	400	5% discount for BIS
5.1(MARKING : Rated voltage or voltage range. )	-	400	5% discount for BIS
5.1.1(MARKING)	-	400	5% discount for BIS
6(LAMP CAPS )	-	1200	5% discount for BIS
7.2.1(Lamp Starting Test : Lamp with External Starter)	-	12500	5% discount for BIS
7.2.2(Lamp Starting Test : Lamp with Internal Starter)	-	12500	5% discount for BIS
7.3.1(Lamp Worm-Up Test)	-	12500	5% discount for BIS
7.3.2(Lamp Worm-Up Test)	-	12500	5% discount for BIS
7.4.1(Lamp Electrical Characteristics : Ageing)	-	12500	5% discount for BIS
7.4.2(Lamp Electrical Characteristics : Ageing)	-	12500	5% discount for BIS
8.1(Open Circuit Voltage)	-	12500	5% discount for BIS
8.2.1(Starting Pulse Characteristics )	-	12500	5% discount for BIS
8.2.2(Starting Pulse Characteristics )	-	12500	5% discount for BIS
8.2.3(Starting Pulse Characteristics )	-	12500	5% discount for BIS
8.2.4.1(Starting Pulse Characteristics : General guidance)	-	12500	5% discount for BIS
8.2.4.2(Starting Pulse Characteristics : General guidance)	-	12500	5% discount for BIS
8.2.4.3(Starting Pulse Characteristics : General guidance)	-	12500	5% discount for BIS
8.3(Lamp Warm-Up Current )	-	12500	5% discount for BIS
8.4(Current Crest Factor )	-	12500	5% discount for BIS
9.1(Voltage Increase at Lamp Terminals)	-	12500	5% discount for BIS
9.2(Lamp Envelope Temperatures )	-	12500	5% discount for BIS
9.3(Permissible Cap Temperatures )	-	12500	5% discount for BIS
4.1(Lamp Dimensions )	-	600	5% discount for BIS
4.2(Glass Bulb)	-	600	5% discount for BIS
4.3.1(Caps)	-	600	5% discount for BIS
4.3.2(Caps)	-	600	5% discount for BIS
4.3.3(Caps)	-	600	5% discount for BIS
4.3.4(Caps : Insulation Resistance)	-	600	5% discount for BIS
10.1(5 000 hours operation, )	-	15000	5% discount for BIS
10.2(Life Test)	-	15000	5% discount for BIS
10.2.1(Switching ‘on’ and switching ‘off’ during life test)	-	15000	5% discount for BIS
11.1( General Conditions )	-	200	5% discount for BIS
11.2(Mechanical, Physical and Marking Requirements )	-	200	5% discount for BIS
11.3.1( Lamp Starting, Warm-up and Electrical Characteristica )	-	200	5% discount for BIS
11.4(Lumen Maintenmce)	-	200	5% discount for BIS
3.1(Starting and operating conditions)	-	100	5% discount for BIS
4(Mechnical and Physical Requirements)	-	600	5% discount for BIS

Complete

19 Mar, 2023

IS 2418 : Part 1 (2018)

Tubular fluorescent lamps for general lighting service: Part 1 safety requirements (Second Revision)

29500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No. 4.10(Lamp minimum overall length)	-	1500	5% discount for BIS
Clause No. 4.9(Lamp cap temperature rise)	-	3500	5% discount for BIS
Clause No. 4.8(Creepage distance for caps)	-	1500	5% discount for BIS
Clause No. 4.7(Resistance to heat & fire)	-	4250	5% discount for BIS
Clause No. 4.6(Parts which can become accidentally live)	-	1250	5% discount for BIS
Clause No. 4.5(Electric strength )	-	4000	5% discount for BIS
Clause No. 4.4(Insulation Resistance Measurement)	-	2500	5% discount for BIS
Clause No. 4.3(Mechanical requirement for caps)	-	1500	5% discount for BIS
Clause No. 4.2 (Marking.)	-	500	5% discount for BIS
3.9(Routine test)	-	0	-
7.1.3(Routine Tests)	-	0	-
4.11(Information for Luminaire Design)	-	4500	5% discount for BIS
4.12(Information for Ballast Design)	-	4500	5% discount for BIS

Complete

19 Mar, 2023

IS 2215 (2006)

Starters for fluorescent lamps (Third Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11(Information for Ballast Design)	-	500	5% discount for BIS
10(Deactivated Lamp Test)	-	500	5% discount for BIS
9(Endurance Test)	-	3500	5% discount for BIS
8(Starting Test)	-	1800	5% discount for BIS
7.13(Heating of Starters with operating time limitation)	-	5000	5% discount for BIS
7.12(Radio Interference Suppression Capacitors)	-	3300	5% discount for BIS
7.11(Quality of Marking)	-	200	5% discount for BIS
7.1(Resistance to Heat and Fire)	-	500	5% discount for BIS
7.9(Connections)	-	500	5% discount for BIS
7.8(Mechanical Strength)	-	500	5% discount for BIS
7.7(Torsion Test)	-	500	5% discount for BIS
7.6(Dimensions)	-	500	5% discount for BIS
7.5(Dielectric Strength)	-	500	5% discount for BIS
7.4(Insulation Resistance under Humidity Conditions)	-	2000	5% discount for BIS
7.3(Protection Against Accidental Electric Shocks)	-	100	5% discount for BIS
6(Marking)	-	100	5% discount for BIS

Complete

19 Mar, 2023

IS 2418 : Part 2 (2018)

Tubular fluorescent lamps for general lighting service: Part 2 performance requirements (Second Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5 of IS 2418:2:2018(MECHANCIAL, PHYSICAL AND STARTING REQUIREMENTS)	-	500	5% discount for BIS
Cl 5.1.2 of IS 2418:2:2018(Caps)	-	500	5% discount for BIS
Cl 5.1.2 of IS 2418:2:2018(Caps)	-	500	5% discount for BIS
Cl 5.1.2 of IS 2418:2:2018(Caps)	-	500	5% discount for BIS
Cl 5.1.2 of IS 2418:2:2018(Caps)	-	500	5% discount for BIS
Cl 5.1.2 of IS 2418:2:2018(Caps)	-	500	5% discount for BIS
Cl 5.1.3 of IS 2418:2:2018(Dimensions)	-	500	5% discount for BIS
Cl 5.2 of IS 2418:2:2018( Starting Requirements)	-	750	5% discount for BIS
Cl 6 of IS 2418:2:2018(MARKING)	-	250	5% discount for BIS
Cl 6 of IS 2418:2:2018(MARKING)	-	250	5% discount for BIS
Cl 6 of IS 2418:2:2018(MARKING)	-	250	5% discount for BIS
Cl 6 of IS 2418:2:2018(MARKING)	-	250	5% discount for BIS
Cl 6 of IS 2418:2:2018(MARKING)	-	250	5% discount for BIS
Cl 6 of IS 2418:2:2018(MARKING)	-	250	5% discount for BIS
Cl 6 of IS 2418:2:2018(MARKING)	-	250	5% discount for BIS
Cl 6 of IS 2418:2:2018(MARKING)	-	250	5% discount for BIS
Cl 7.3 of IS 2418:2:2018(Visual Examination and Checking for Marking)	-	250	5% discount for BIS
Cl 7.4 of IS 2418:2:2018(Burning Test)	-	7500	5% discount for BIS
Cl 7.5 of IS 2418:2:2018(Starting Characteristics)	-	7500	5% discount for BIS
Cl 7.6 of IS 2418:2:2018(Test for Electrical Luminous and Colour Characteristics)	-	10000	5% discount for BIS
Cl 7.7 of IS 2418:2:2018(Chromaticity Co-ordinates )	-	10000	5% discount for BIS
Cl 7.8 of IS 2418:2:2018(Life and Lumen Maintenance)	-	7000	5% discount for BIS
Cl 7.8 of IS 2418:2:2018(Life and Lumen Maintenance)	-	7000	5% discount for BIS
Cl 7.8 of IS 2418:2:2018(Life and Lumen Maintenance)	-	7000	5% discount for BIS
Clause No. 7.8(Life and Lumen Maintenance)	-	7000	5% discount for BIS
Clause No. 7.7(Chromaticity Co-ordinates)	-	10000	5% discount for BIS
Clause No. 7.6(Test for Electrical Luminous and Colour Characteristics)	-	10000	5% discount for BIS
Clause No. 7.4 & & 7.5(Burning Test & Starting Characteristics)	-	15000	5% discount for BIS
Clause No. 7.3 (Visual Examination and Checking for Marking.)	-	250	5% discount for BIS
3.15(Routine Test)	-	0	-
7.1.3(Routine tests)	-	0	-
4.12 of IS 2418 : Part 1 (2018)(Information for Ballast Design)	-	0	-
4.11 of IS 2418 : Part 1 (2018)(Information for Luminaire Design)	-	0	-
7.1.3 of IS 2418 : Part 1 (2018)(Routine Tests)	-	0	-
3.9 of IS 2418 : Part 1 (2018)(Routine test)	-	0	-
4.2 of IS 2418 : Part 1 (2018(Marking.)	-	500	5% discount for BIS
4.3 of IS 2418 : Part 1 (2018)(Mechanical requirement for caps)	-	1500	5% discount for BIS
4.4 of IS 2418 : Part 1 (2018)(Insulation Resistance Measurement)	-	2500	5% discount for BIS
4.5 of IS 2418 : Part 1 (2018)(Electric strength)	-	4000	5% discount for BIS
4.6 of IS 2418 : Part 1 (2018)(Parts which can become accidentally live)	-	1250	5% discount for BIS
4.7 of IS 2418 : Part 1 (2018)(Resistance to heat & fire)	-	4250	5% discount for BIS
4.8 of IS 2418 : Part 1 (2018)(Creepage distance for caps)	-	1500	5% discount for BIS
4.9 of IS 2418 : Part 1 (2018)(Lamp cap temperature rise)	-	3500	5% discount for BIS
4.10 of IS 2418 : Part 1 (2018)(Lamp minimum overall length)	-	1500	5% discount for BIS
Cl 5 of IS 2418:2:2018(MECHANCIAL, PHYSICAL AND STARTING REQUIREMENTS)	-	0	-
Cl 5.1.2 of IS 2418:2:2018(Caps)	-	0	-
Cl 5.1.2 of IS 2418:2:2018(Caps)	-	0	-
Cl 5.1.2 of IS 2418:2:2018(Caps)	-	0	-
Cl 5.1.2 of IS 2418:2:2018(Caps)	-	0	-
Cl 5.1.2 of IS 2418:2:2018(Caps)	-	0	-
Cl 5.1.3 of IS 2418:2:2018(Dimensions)	-	0	-
Cl 5.2 of IS 2418:2:2018( Starting Requirements)	-	0	-
Cl 6 of IS 2418:2:2018(MARKING)	-	0	-
Cl 6 of IS 2418:2:2018(MARKING)	-	0	-
Cl 6 of IS 2418:2:2018(MARKING)	-	0	-
Cl 6 of IS 2418:2:2018(MARKING)	-	0	-
Cl 6 of IS 2418:2:2018(MARKING)	-	0	-
Cl 6 of IS 2418:2:2018(MARKING)	-	0	-
Cl 6 of IS 2418:2:2018(MARKING)	-	0	-
Cl 6 of IS 2418:2:2018(MARKING)	-	0	-
Cl 7.3 of IS 2418:2:2018(Visual Examination and Checking for Marking)	-	0	-
Cl 7.4 of IS 2418:2:2018(Burning Test)	-	0	-
Cl 7.5 of IS 2418:2:2018(Starting Characteristics)	-	0	-
Cl 7.6 of IS 2418:2:2018(Test for Electrical Luminous and Colour Characteristics)	-	0	-
Cl 7.7 of IS 2418:2:2018(Chromaticity Co-ordinates )	-	0	-
Cl 7.8 of IS 2418:2:2018(Life and Lumen Maintenance)	-	0	-
Cl 7.8 of IS 2418:2:2018(Life and Lumen Maintenance)	-	0	-
Cl 7.8 of IS 2418:2:2018(Life and Lumen Maintenance)	-	0	-
3.15(Routine Test)	-	0	-
7.1.3(Routine tests)	-	0	-
4.12 of IS 2418 : Part 1 (2018)(Information for Ballast Design)	-	0	-
4.11 of IS 2418 : Part 1 (2018)(Information for Luminaire Design)	-	0	-
7.1.3 of IS 2418 : Part 1 (2018)(Routine Tests)	-	0	-
3.9 of IS 2418 : Part 1 (2018)(Routine test)	-	0	-
4.2 of IS 2418 : Part 1 (2018(Marking.)	-	0	-
4.3 of IS 2418 : Part 1 (2018)(Mechanical requirement for caps)	-	0	-
4.4 of IS 2418 : Part 1 (2018)(Insulation Resistance Measurement)	-	0	-
4.5 of IS 2418 : Part 1 (2018)(Electric strength)	-	0	-
4.6 of IS 2418 : Part 1 (2018)(Parts which can become accidentally live)	-	0	-
4.7 of IS 2418 : Part 1 (2018)(Resistance to heat & fire)	-	0	-
4.8 of IS 2418 : Part 1 (2018)(Creepage distance for caps)	-	0	-
4.9 of IS 2418 : Part 1 (2018)(Lamp cap temperature rise)	-	0	-
4.10 of IS 2418 : Part 1 (2018)(Lamp minimum overall length)	-	0	-

Complete

19 Mar, 2023

IS/IEC 61730 : PART 2 (2019)

Photovoltaic (PV) module safety qualification: Part 2 requirements for testing (First Revision)

847500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.2 IS/IEC 61730-2( Visual inspection MST01)	-	7500	5% discount for BIS
10.3 IS/IEC 61730-2(Performance at STC MST 02)	-	7500	5% discount for BIS
10.4 IS/IEC 61730-2(Maximum power determination MST 03)	-	12500	5% discount for BIS
10.5 IS/IEC 61730-2(Insulation thickness test MST 04)	-	15000	5% discount for BIS
10.6 IS/IEC 61730-2(Durability of marking MST 05)	-	15000	5% discount for BIS
10.7 IS/IEC 61730-2(Sharp edge test MST 06)	-	15000	5% discount for BIS
10.8 IS/IEC 61730-2(Bypass diode functionality test MST 07)	-	15000	5% discount for BIS
10.9 IS/IEC 61730-2(Accessibility test MST 11)	-	15000	5% discount for BIS
10.10 IS/IEC 61730-2(Cut susceptibility test MST 12)	-	15000	5% discount for BIS
10.11 IS/IEC 61730-2(Continuity test of equipotential bonding MST 13)	-	20000	5% discount for BIS
10.12 IS/IEC 61730-2(Impulse voltage test MST 14)	-	22500	5% discount for BIS
10.13 IS/IEC 61730-2( Insulation test MST 16)	-	25000	5% discount for BIS
10.14 IS/IEC 61730-2( Wet leakage current test MST 17)	-	15000	5% discount for BIS
10.15 IS/IEC 61730-2( Temperature test MST 21)	-	45000	5% discount for BIS
10.16 IS/IEC 61730-2(Hot-spot endurance test MST 22)	-	22500	5% discount for BIS
10.17 IS/IEC 61730-2( Fire test MST 23)	-	175000	5% discount for BIS
10.18 IS/IEC 61730-2(Ignitability test MST 24)	-	12500	5% discount for BIS
10.19 IS/IEC 61730-2( Bypass diode thermal test MST 25)	-	12500	5% discount for BIS
10.20 IS/IEC 61730-2( Reverse current overload test MST 25)	-	55000	5% discount for BIS
10.21 IS/IEC 61730-2( Module breakage test MST 32)	-	27500	5% discount for BIS
10.22 IS/IEC 61730-2(Screw connections test MST 33)	-	32500	5% discount for BIS
10.23 IS/IEC 61730-2( Static Mechanical load test MST 34)	-	12500	5% discount for BIS
10.24 IS/IEC 61730-2( Peel test MST 35)	-	12500	5% discount for BIS
10.25 IS/IEC 61730-2( Lap shear strength test MST 36)	-	5000	5% discount for BIS
10.26 IS/IEC 61730-2(Materials creep test MST 37)	-	12500	5% discount for BIS
10.27 IS/IEC 61730-2( Robutness of terminations test MST 42)	-	12500	5% discount for BIS
10.28 IS/IEC 61730-2(Thermal cycling test MST 51)	-	17500	5% discount for BIS
10.29 IS/IEC 61730-2( Humidity-freeze test MST 52)	-	55000	5% discount for BIS
10.30 IS/IEC 61730-2( Damp heat test MST 53)	-	40000	5% discount for BIS
10.31 IS/IEC 61730-2(UV test MST 54)	-	27500	5% discount for BIS
10.32 IS/IEC 61730-2( Cold conditioning MST 55)	-	40000	5% discount for BIS
10.33 IS/IEC 61730-2( Dry heat conditioning MST 56)	-	30000	5% discount for BIS

Complete

19 Mar, 2023

IS 16169 (2014)

Utility - Interconnected photovoltaic inverters - Test procedure of islanding prevention measures

100000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7, (Elec)(Documentation)	-	0	-
6 to 6.2, (Elec)(Test for single or multi-phase inverter to Pass/fail criteria)	-	100000	5% discount for BIS
Annex A, (Elec)(Islanding as it applies to PV systems)	-	0	-
Annex B, (Elec)(Test for independent islanding device)	-	0	-
6, (Elec)(Test for single or multi-phase inverter)	-	100000	5% discount for BIS

Complete

19 Mar, 2023

IS/IEC 61730 : PART 2 (2004)

Photovoltaic (PV) Module Safety Qualification Part 2 Requirements for Testing

837500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1(Visual Inspection (MST 01))	-	7500	5% discount for BIS
10.2(Accessibility test (MST 11))	-	22500	5% discount for BIS
10.3(Cut susceptibility test (MST 12))	-	27500	5% discount for BIS
10.4(Ground Continuity Test (MST 13))	-	35000	5% discount for BIS
10.5(Impulse voltage test (MST 14))	-	42500	5% discount for BIS
10.6(Dielectric withstand test (MST 16))	-	47500	5% discount for BIS
10.7(Temperature test (MST 21))	-	85000	5% discount for BIS
10.8(Fire test (MST 23))	-	175000	5% discount for BIS
10.9(Reverse Current overload test (MST 26))	-	90000	5% discount for BIS
10.10(Module breakage test (MST 32))	-	55000	5% discount for BIS
11.1(Partial discharge-test (MST 15))	-	60000	5% discount for BIS
11.2(Conduit Bending test (MST 33))	-	55000	5% discount for BIS
11.3(Terminal box knockout tests (MST 44))	-	55000	5% discount for BIS
Cl.5, Table 7(Thermal cycling (T200) (MST 51))	-	0	5% discount for BIS
Cl.5, Table 7(Thermal cycling (T50) (MST 51))	-	0	5% discount for BIS
Cl.5, Table 7(Humidity freeze (10HF) (MST 52))	-	0	5% discount for BIS
Cl.5, Table 7(Damp heat (DH1000) (MST 53))	-	0	5% discount for BIS
Cl.5, Table 7(UV resistance (MST 54))	-	0	5% discount for BIS
Cl.5, Table 7(Wet leakage current test (MST 17))	-	0	5% discount for BIS
Cl.5, Table 7(Robustness of termination test (MST 42))	-	0	5% discount for BIS
Cl.5, Table 7(Hot spot test (MST 22))	-	0	5% discount for BIS
Cl.5, Table 7(Mechanical load test (MST 34))	-	0	5% discount for BIS

Complete

19 Mar, 2023

IS 9873 : Part 1 (2019)

Safety of toys: Part 1 safety aspects related to mechanical and physical properties (Fourth Revision)

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 - 5.24.2( Reasonably foreseeable abuse -Drop Test)	-	750	5% discount for BIS
4.2 - 5.24.3( Reasonably foreseeable abuse -Tip-over test for large and bulky toys)	-	750	5% discount for BIS
4.2 - 5.24.4( Reasonably foreseeable abuse -Dynamic strength test for wheeled ride-on toys other than toy scooters)	-	750	5% discount for BIS
4.2 - 5.24.5( Reasonably foreseeable abuse -Torque test)	-	750	5% discount for BIS
4.2 - 5.24.6.2( Reasonably foreseeable abuse -Tension test for seams in soft-filled (stuffed) toys. beanbag-type toys, and other similar filled toys)	-	750	5% discount for BIS
4.2 - 5.24.6.3( Reasonably foreseeable abuse -Tension test for pompoms)	-	750	5% discount for BIS
4.2 - 5.24.6.4( Reasonably foreseeable abuse -Tension test for protective components)	-	750	5% discount for BIS
4.2 - 5.24.6.5( Reasonably foreseeable abuse -Tension test for a projectile with a suction cup)	-	750	5% discount for BIS
4.2 - 5.24.7( Reasonably foreseeable abuse -Compression test)	-	750	5% discount for BIS
4.2 - 5.24.8.2( Reasonably foreseeable abuse-Flexure test-Wires and other metallic components intended to be bent)	-	750	5% discount for BIS
4.2 - 5.24.8.3( Reasonably foreseeable abuse -Flexure test-Wires likely to be bent)	-	750	5% discount for BIS
4.3.2 - 5.21( Expanding materials)	-	500	5% discount for BIS
4.4.1 - 5.2(Small parts-For children under 36 months)	-	100	5% discount for BIS
4.4.2 - 5.2(Small parts-For children 36 months and over but under 72 months )	-	100	5% discount for BIS
4.5.1.2 - 5.3(Shape, size and strength of certain toys-Squeeze toys, rattles, and certain other toys and components of toys-Test for shape and size of certain toys)	-	100	5% discount for BIS
4.5.1.3 - 5.3(Shape, size and strength of certain toys-Other toys or components of toys with nearly spherical, hemispherical, circular flared, or dome-shaped ends of toys having a mass less than 0,5 kg and intended for children under 18 months-Test for shape and size of certain toys)	-	100	5% discount for BIS
4.5.1.4 - 5.3(Shape, size and strength of certain toys-Toy fasteners (e.g. nails, bolts, screws, and pegs) with nearly spherical, hemispherical, or dome-shaped ends intended for children 18 months and over but under 48 months-Test for shape and size of certain toys)	-	100	5% discount for BIS
4.5.2 - 5.4(Shape, size and strength of certain toys-Small balls-Small balls test)	-	100	5% discount for BIS
4.5.3 - 5.5(Shape, size and strength of certain toys-Pompoms-Test for pompoms)	-	100	5% discount for BIS
4.5.4 - 5.6(Shape, size and strength of certain toys- Pre-school play figures-Test for pre-school play figures)	-	100	5% discount for BIS
4.5.5(Shape, size and strength of certain toys-Toy pacifiers-Nipple length)	-	100	5% discount for BIS
4.5.6(Shape, size and strength of certain toys-Balloons)	-	100	5% discount for BIS
4.5.7(Shape, size and strength of certain toys-Marbles)	-	100	5% discount for BIS
4.5.8 - a(Shape, size and strength of certain toys-Hemispheric-shaped toys-No of Opening)	-	100	5% discount for BIS
4.5.8 - a(Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening in Base)	-	100	5% discount for BIS
4.5.8 - a(Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening not in Base)	-	100	5% discount for BIS
4.5.8 - b(Shape, size and strength of certain toys-Hemispheric-shaped toys-Extension of divider)	-	100	5% discount for BIS
4.5.8 - c(Shape, size and strength of certain toys-Hemispheric-shaped toys-No of Opening)	-	100	5% discount for BIS
4.5.8 - c(Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening )	-	100	5% discount for BIS
4.5.8 - c(Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening )	-	100	5% discount for BIS
4.5.8 - d(Shape, size and strength of certain toys-Hemispheric-shaped toys)	-	100	5% discount for BIS
4.5.8 - d(Shape, size and strength of certain toys-Hemispheric-shaped toys-The maximum distance between centrelines of adjacent peaks )	-	100	5% discount for BIS
4.5.8 - d(Shape, size and strength of certain toys-Hemispheric-shaped toys-Minimum depth)	-	100	5% discount for BIS
4.6.1 a - 5.8(Edges-Accessible sharp edges of glass or metal-Sharp edge test)	-	250	5% discount for BIS
4.6.1 b(Edges-Accessible sharp edges of glass or metal- gap between the edge and the adjacent surface)	-	250	5% discount for BIS
4.6.2(Edges-Functional sharp edges)	-	250	5% discount for BIS
4.6.3 - 5.8(Edges-Edges on metal toys-Sharp edge test)	-	250	5% discount for BIS
4.6.4( Edges-Edges on moulded toys)	-	250	5% discount for BIS
4.6.5( Edges-Edges on exposed bolts or threaded rod)	-	250	5% discount for BIS
4.7.1 - 5.9(Points-Accessible sharp points-sharp-point test)	-	150	5% discount for BIS
4.7.2 - a(Points-Functional sharp points)	-	150	5% discount for BIS
4.7.2 - b(Points-Functional sharp points)	-	150	5% discount for BIS
4.7.3 (Wooden toys)	-	150	5% discount for BIS
4.8.1(Projections-General requirments)	-	100	5% discount for BIS
4.9(a) - 5.24.8.2( Metal wires and rods-wires and other metallic components intended to be bent)	-	750	5% discount for BIS
4.9(b) - 5.24.8.3( Metal wires and rods-wires likely to be bent)	-	750	5% discount for BIS
4.9 - c( Metal wires and rods)	-	750	5% discount for BIS
4.9 - c - 5.8( Metal wires and rods-Sharp edge test)	-	250	5% discount for BIS
4.9 - c - 5.9( Metal wires and rods-Sharp Point test)	-	150	5% discount for BIS
4.9 - c( Metal wires and rods-Minimum dia of spokes)	-	100	5% discount for BIS
4.9 - c( Metal wires and rods-Spokes ends)	-	100	5% discount for BIS
4.10(a) - 5.10(Plastic film or plastic bags in packaging and in toys-average thickness)	-	100	5% discount for BIS
4.10(a) - 5.10(Plastic film or plastic bags in packaging and in toys- individual thickness)	-	100	5% discount for BIS
4.11.2.1(a) - 5.11.2( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-Length of cords and electrical cables)	-	150	5% discount for BIS
4.11.2.1(b) - 5.11.3( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-breakaway feature separation test)	-	150	5% discount for BIS
4.11.2.1(b) - 5.11.2( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-Length of cords and electrical cables after breakaway feature separation test)	-	150	5% discount for BIS
4.11.2.2 - 5.11.2( Cords-Cords in toys intended for children under 18 months--Other cords-free length )	-	150	5% discount for BIS
4.11.3.1(a) - 5.11.2( Cords-Cords in toys intended for children 18 months and over but under 36 months-Cords with the potential to tangle-Length of cords and electrical cables)	-	150	5% discount for BIS
4.11.3.1(b) - 5.11.3( Cords-Cords in toys intended for children 18 months and over but under 36 months-Cords with the potential to tangle-breakaway feature separation test)	-	150	5% discount for BIS
4.11.3.1(b) - 5.11.2( Cords-Cords in toys intended for children 18 months and over but under 36 months-Cords with the potential to tangle-Length of cords and electrical cables after breakaway feature separation test)	-	150	5% discount for BIS
4.11.3.2( Cords-Cords in toys intended for children 18 months and over but under 36 months-Other cords)	-	150	5% discount for BIS
4.11.3.3 ( Cords-Cords in toys intended for children 18 months and over but under 36 months-Other cords without a free end )	-	150	5% discount for BIS
4.11.4(a) - 5.11.4.1(Cords-Fixed loops and nooses intended for children under 36 months-Test for fixed loops and nooses-Head probe push test)	-	150	5% discount for BIS
4.11.4(a) - 5.11.4.2(Cords-Fixed loops and nooses intended for children under 36 months-Test for fixed loops and nooses-Elastic materials)	-	150	5% discount for BIS
4.11.4(b) - 5.11.3(Cords-Fixed loops and nooses intended for children under 36 months-Breakaway feature separation test)	-	150	5% discount for BIS
4.11.5 - 5.11.2(Cords-Cords on pull toys-free length)	-	150	5% discount for BIS
4.11.6(Cords- Electrical cables)	-	150	5% discount for BIS
4.11.7 - 5.11.1(Cords- Diameter of certain cords intended for children under 36 months-cords cross-sectional dimension)	-	150	5% discount for BIS
4.11.8 - 5.11.5(Cords- Self-retracting cords intended for children under 36 months-self-retracting cords)	-	150	5% discount for BIS
4.11.9.1(Cords-Toys intended to be strung across a cradle, cot, perambulator or carriage)	-	150	5% discount for BIS
4.11.9.2 (Cords-Toys otherwise intended to be attached to a cradle, cot, perambulator or carriage)	-	150	5% discount for BIS
4.11.9.2 (Cords-Toys otherwise intended to be attached to a cradle, cot, perambulator or carriage)	-	150	5% discount for BIS
4.11.10(Cords-Cords on toy bags)	-	150	5% discount for BIS
4.11.11 - 5.11.6( Cords, strings and lines for flying toys- electrical resistance)	-	150	5% discount for BIS
4.11.11( Cords, strings and lines for flying toys- )	-	150	5% discount for BIS
4.12.1(a - 1)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	250	5% discount for BIS
4.12.1(a - 2)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	250	5% discount for BIS
4.12.1(a - 3) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys-toy pushchairs and perambulators)	-	250	5% discount for BIS
4.12.1(a - 4)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	250	5% discount for BIS
4.12.1(a - 5) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	250	5% discount for BIS
4.12.1(b - 1)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	250	5% discount for BIS
4.12.1(b - 2) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	250	5% discount for BIS
4.12.1(b - 3) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	250	5% discount for BIS
4.12.2 (a) - 5.22.3(Folding mechanisms-Other toys with folding mechanisms)	-	250	5% discount for BIS
4.12.2 (b)(Folding mechanisms-Other toys with folding mechanisms)	-	250	5% discount for BIS
4.12.3(Folding mechanisms-Hinge line clearance)	-	250	5% discount for BIS
4.13.1(Holes, clearances and accessibility of mechanisms-Circular holes in rigid materials)	-	100	5% discount for BIS
4.13.2 (Holes, clearances and accessibility of mechanisms-Accessible clearances for movable segments)	-	100	5% discount for BIS
4.13.3(Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys)	-	100	5% discount for BIS
4.13.3 - 5.7(Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys-accessibility of a part or component)	-	100	5% discount for BIS
4.13.4(Holes, clearances and accessibility of mechanisms-Other driving mechanisms)	-	100	5% discount for BIS
4.13.5(Holes, clearances and accessibility of mechanisms-Winding keys)	-	100	5% discount for BIS
4.14(a)(Springs)	-	100	5% discount for BIS
4.14(b)(Springs)	-	100	5% discount for BIS
4.14(c)(Springs)	-	100	5% discount for BIS
4.15.1.1 - 5.12.2( Stability and overload requirements-Stability of ride-on toys and seats-Sideways stability, feet available for stabilization)	-	200	5% discount for BIS
4.15.1.2 - 5.12.3( Stability and overload requirements-Stability of ride-on toys and seats-Sideways stability, feet unavailable for stabilization)	-	200	5% discount for BIS
4.15.1.3 - 5.12.4( Stability and overload requirements-Stability of ride-on toys and seats-Fore and aft stability Test)	-	200	5% discount for BIS
4.15.2 - 5.12.5( Stability and overload requirements-Overload requirements for ride-on toys and seats-overload test for ride-on toys and seats)	-	200	5% discount for BIS
4.15.2 - 5.24.4( Stability and overload requirements-Overload requirements for ride-on toys and seats-dynamic strength test for wheeled ride-on toys other than toy scooters)	-	750	5% discount for BIS
4.15.3 - 5.12.6( Stability and overload requirements-Stability of stationary floor toy-Stability test of stationary floor toys)	-	200	5% discount for BIS
4.16.1(Enclosures-Ventilation)	-	500	5% discount for BIS
4.16.1(Enclosures-Ventilation-No of openings)	-	500	5% discount for BIS
4.16.1(Enclosures-Ventilation-Area of Each openings(If two openings))	-	500	5% discount for BIS
4.16.1(Enclosures-Ventilation-Distance between openings(If two openings))	-	500	5% discount for BIS
4.16.1(Enclosures-Ventilation-Area of Each openings(If One opening))	-	500	5% discount for BIS
4.16.1(Enclosures-Ventilation-spacing(If One opening))	-	500	5% discount for BIS
4.16.2.1(Enclosures-Closures-Lids, doors and similar devices)	-	500	5% discount for BIS
4.16.2.1 - 5.13.1(Enclosures-Closures-Lids, doors and similar devices-Test For closures)	-	500	5% discount for BIS
4.16.2.2(a)(Enclosures-Closures-Lid support for toy chests and similar toys)	-	500	5% discount for BIS
4.16.2.2(a) - 5.13.2.1(Enclosures-Closures-Lid support for toy chests and similar toys-Test For lid support)	-	500	5% discount for BIS
4.16.2.2(a) - 5.13.2.2(Enclosures-Closures-Lid support for toy chests and similar toys- After durability test for toy chest lids)	-	500	5% discount for BIS
4.16.2.2(a) - 5.13.2.2(Enclosures-Closures-Lid support for toy chests and similar toys-Test For lid support After durability test for toy chest lids)	-	500	5% discount for BIS
4.16.2.2(b) - 5.13.2.2(Enclosures-Closures-Lid support for toy chests and similar toys-durability test for toy chest lids)	-	500	5% discount for BIS
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 1)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	5% discount for BIS
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 2)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	5% discount for BIS
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 3) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys-toy pushchairs and perambulators)	-	500	5% discount for BIS
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 4)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	5% discount for BIS
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 5) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	5% discount for BIS
4.16.2.2(c) - 5.13.2.2 - 4.12.1(b - 1)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	5% discount for BIS
4.16.2.2(c) - 5.13.2.2 - 4.12.1(b - 2) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	5% discount for BIS
4.16.2.2(c) - 5.13.2.2 - 4.12.1(b - 3) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	5% discount for BIS
4.16.2.2(c) - 5.13.2.2 - 4.12.2 (a) - 5.22.3(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Other toys with folding mechanisms)	-	500	5% discount for BIS
4.16.2.2(c) - 5.13.2.2 - 4.12.2 (b)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Other toys with folding mechanisms)	-	500	5% discount for BIS
4.16.2.2(c) - 5.13.2.2 - 4.12.3(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Hinge line clearance)	-	500	5% discount for BIS
4.16.2.2(d)(Enclosures-Closures-Lid support for toy chests and similar toys)	-	500	5% discount for BIS
4.16.3(Enclosures-Toys that enclose the head)	-	500	5% discount for BIS
4.16.3(Enclosures-Toys that enclose the head-No of openings)	-	500	5% discount for BIS
4.16.3(Enclosures-Toys that enclose the head-Area of Each openings(If two openings))	-	500	5% discount for BIS
4.16.3(Enclosures-Toys that enclose the head-Distance between openings(If two openings))	-	500	5% discount for BIS
4.16.3(Enclosures-Toys that enclose the head-Area of Each openings(If One opening))	-	500	5% discount for BIS
4.17 - 5.14(Simulated protective equipment, such as helmets, hats and goggles-Impact test for toys that cover the face)	-	100	5% discount for BIS
4.17(Simulated protective equipment, such as helmets, hats and goggles)	-	100	5% discount for BIS
4.18.2(a) - 5.36(Projectile toys-Projectiles-tip assessment of rigid projectiles)	-	100	5% discount for BIS
4.18.2(b)(Projectile toys-Projectiles)	-	100	5% discount for BIS
4.18.2(c)(Projectile toys-Projectiles)	-	100	5% discount for BIS
4.18.2(c)(Projectile toys-Projectiles-Radius)	-	100	5% discount for BIS
4.18.2(d) - 5.37(Projectile toys-Projectiles-length of suction cup projectiles)	-	100	5% discount for BIS
4.18.2(d) - 5.37 - 5.24.5(Projectile toys-Projectiles-length of suction cup projectiles After torque test)	-	100	5% discount for BIS
4.18.2(d) - 5.37 - 5.24.6.5(Projectile toys-Projectiles-length of suction cup projectiles After tension test for a projectile with a suction cup)	-	100	5% discount for BIS
4.18.2 - e - 5.24.5(Projectile toys-Projectiles-torque test)	-	100	5% discount for BIS
4.18.2 - e - 5.24.6.5(Projectile toys-Projectiles-tension test for a projectile with a suction cup)	-	100	5% discount for BIS
4.18.3(a) - 5.2(Projectile toys-Projectile toys with stored energy-small parts test)	-	100	5% discount for BIS
4.18.3(a) - 5.3 - 5.24(Projectile toys-Projectile toys with stored energy-small parts test after reasonably foreseeable abuse testing)	-	100	5% discount for BIS
4.18.3(a) - 5.4(Projectile toys-Projectile toys with stored energy--small parts test after (wall impact test for projectiles)	-	100	5% discount for BIS
4.18.3(b)(Projectile toys-Projectile toys with stored energy)	-	100	5% discount for BIS
4.18.3(b) - 5.15.1.3.3(Projectile toys-Projectile toys with stored energy-determination of kinetic energy per area of contact)	-	200	5% discount for BIS
4.18.3(c ) - 5.24.5(Projectile toys-Projectile toys with stored energy-torque test)	-	100	5% discount for BIS
4.18.3(c ) - 5.24.6.4(Projectile toys-Projectile toys with stored energy- tension test for protective components)	-	100	5% discount for BIS
4.18.3(c )(Projectile toys-Projectile toys with stored energy)	-	100	5% discount for BIS
4.18.3(d) - 5.15.2(Projectile toys-Projectile toys with stored energy-Wall impact test for projectiles)	-	200	5% discount for BIS
4.18.3(e )(Projectile toys-Projectile toys with stored energystored energy-Discharge mechanism)	-	200	5% discount for BIS
4.18.4.1 - 5.20(Projectile toys-Projectile toys without stored energy-Mouth-actuated projectile toys-durability of mouth-actuated toys)	-	250	5% discount for BIS
4.18.4.2(a) - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-determination of the kinetic energy per area of contact when the contact area of the dart shall be at least 3 cm^2)	-	200	5% discount for BIS
4.18.4.2(b)(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart)	-	200	5% discount for BIS
4.18.4.2(c ) - 5.24.5(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After torque test)	-	200	5% discount for BIS
4.18.4.2(c ) - 5.24.5(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-Contact area After torque test)	-	200	5% discount for BIS
4.18.4.2(c ) - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After tension test for protective components)	-	200	5% discount for BIS
4.18.4.2(c ) - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-Contact area After tension test for protective components)	-	200	5% discount for BIS
4.18.4.6 - 5.24.6.4 - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-kinetic energy per area After tension test for protective components)	-	200	5% discount for BIS
4.19(Rotors and propellers)	-	250	5% discount for BIS
4.2(Aquatic toys)	-	200	5% discount for BIS
4.21(a)(Braking)	-	250	5% discount for BIS
4.21(a)(Braking-brake performance for mechanically or electrically powered ride-on toys other than toy bicycles)	-	250	5% discount for BIS
4.22.1(Toy bicycles-Instructions for use)	-	250	5% discount for BIS
4.22.2(Toy bicycles-Determination of maximum saddle height)	-	250	5% discount for BIS
4.22.3 - 5.16.1(Toy bicycles-Braking requirements-determination of free-wheeling facility)	-	250	5% discount for BIS
4.22.3 (Toy bicycles-Braking requirements- brake lever dimension(d))	-	250	5% discount for BIS
4.22.3 (Toy bicycles-Braking requirements- lever Length(l))	-	250	5% discount for BIS
4.22.3 - 5.16.3(Toy bicycles-Braking requirements- brake performance for toy bicycles)	-	250	5% discount for BIS
4.23 - 5.17(Speed limitation of electrically driven ride-on toys-determination of speed of electrically driven ride-on toys)	-	500	5% discount for BIS
4.24(a) - 5.18(Toys containing a heat source-determination of temperature increases)	-	300	5% discount for BIS
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand-(Parts made of metals))	-	300	5% discount for BIS
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand(Parts made of glass or porcelain))	-	300	5% discount for BIS
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand(Parts made of Plastic or wood ))	-	300	5% discount for BIS
4.24(c) - 5.18(Toys containing a heat source- rise in temperature of other accessible parts of the toy(Parts made of metals))	-	300	5% discount for BIS
4.24(c) - 5.18(Toys containing a heat source- rise in temperature of other accessible parts of the toy( Parts made of other materials))	-	300	5% discount for BIS
4.25 - 5.19(Liquid-filled toys-leakage of liquid-filled toys)	-	150	5% discount for BIS
4.26(a) - 5.2( Mouth-actuated toys-small parts test)	-	100	5% discount for BIS
4.26(b) - 5.24.5 - 5.3( Mouth-actuated toys-small parts test after torque test)	-	100	5% discount for BIS
4.26(b) - 5.24.6.1 - 5.4( Mouth-actuated toys-small parts test after tension test, general procedure)	-	100	5% discount for BIS
4.26(c ) - 5.20 - 5.2( Mouth-actuated toys-small parts test after durability of mouth-actuated toys)	-	100	5% discount for BIS
4.27(Toy roller skates, toy inline skates and toy skateboards)	-	200	5% discount for BIS
4.28( Percussion caps specifically designed for use in toys)	-	200	5% discount for BIS
4.29(a) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	250	5% discount for BIS
4.29(b) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	250	5% discount for BIS
4.29(c) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	250	5% discount for BIS
4.29(d) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	250	5% discount for BIS
4.29(e) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	250	5% discount for BIS
4.29(f) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	250	5% discount for BIS
4.29(g) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	250	5% discount for BIS
4.30.2(Toy scooters-Warnings and instructions for use)	-	200	5% discount for BIS
4.30.3 - 5.26 - 5.8(Toy scooters-Strength-After static strength for toy scooters- sharp edge test)	-	200	5% discount for BIS
4.30.3 - 5.26 - 5.9(Toy scooters-Strength-static strength for toy scooters-sharp-point test)	-	200	5% discount for BIS
4.30.3 - 5.26(Toy scooters-Strength-static strength for toy scooters)	-	200	5% discount for BIS
4.30.3 - 5.27 - 5.8(Toy scooters-Strength-dynamic strength for toy scooters- sharp-edge test)	-	250	5% discount for BIS
4.30.3 - 5.27 - 5.9(Toy scooters-Strength-dynamic strength for toy scooters-sharp-point test)	-	250	5% discount for BIS
4.30.3 - 5.29(Toy scooters-Strength-strength of toy scooter steering tubes)	-	150	5% discount for BIS
4.30.3 - 5.27(Toy scooters-Strength-dynamic strength for toy scooters)	-	250	5% discount for BIS
4.30.4 - 5.12.2(Toy scooters-Stability-sideways stability test, feet available for stabilization)	-	200	5% discount for BIS
4.30.5(a)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	200	5% discount for BIS
4.30.5(a)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	200	5% discount for BIS
4.30.5(b)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	200	5% discount for BIS
4.30.5(c)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	200	5% discount for BIS
4.30.5(d)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	200	5% discount for BIS
4.30.5(e)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	200	5% discount for BIS
4.30.5(f) - 5.30( Toy scooters-Adjustable and folding steering tubes and handlebars-resistance to separation of handlebar)	-	100	5% discount for BIS
4.30.6 ( Toy scooters-Braking)	-	250	5% discount for BIS
4.30.6 ( Toy scooters-Braking)	-	250	5% discount for BIS
4.30.6 - 5.28( Toy scooters-Braking- force required to hold the toy)	-	250	5% discount for BIS
4.30.7( Toy scooters-Wheel size(diameter))	-	200	5% discount for BIS
4.30.8(Toy scooters-Projections)	-	250	5% discount for BIS
4.30.8(Toy scooters-Projections(rounded handlebar grips or plugs Diameter))	-	250	5% discount for BIS
4.30.8(Toy scooters-Projections(rounded handlebar grips or plugs space from end))	-	250	5% discount for BIS
4.31(Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over)	-	100	5% discount for BIS
4.31.1 - 5.32(Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over-magnetic flux index)	-	100	5% discount for BIS
4.31.1 - 5.2(Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over-small parts test)	-	100	5% discount for BIS
4.31.2(a) - 5.32(Magnets and magnetic components-All other toys with magnets and magnetic components-magnetic flux index)	-	100	5% discount for BIS
4.31.2(a) - 5.32(Magnets and magnetic components-All other toys with magnets and magnetic components-small parts test)	-	100	5% discount for BIS
4.31.2(b) - 5.34 - 5.2(Magnets and magnetic components-All other toys with magnets and magnetic components-soaking test for magnets-small parts test)	-	200	5% discount for BIS
4.31.2(c ) - 5.31 - 5.24.2 - 5.24.3 - 5.24.5 - 5.24.6.1 - 5.24.6.2 - 5.33 - 5.31 - 5.32(Magnets and magnetic components-All other toys with magnets and magnetic components-magnetic flux index After Following tests: -tension test for magnets; -drop test/tip over test for large and bulky toys; -torque test; -tension test, general procedure; -tension test for seams in soft-filled (stuffed) toys, beanbag-type toys and other similar filled toys, if applicable; -impact test for magnets; -compression test; -tension test for magnets;)	-	200	5% discount for BIS
4.31.2(c ) - 5.31 - 5.24.2 - 5.24.3 - 5.24.5 - 5.24.6.1 - 5.24.6.2 - 5.33 - 5.31 - 5.2(Magnets and magnetic components-All other toys with magnets and magnetic components-small parts test After Following tests: -tension test for magnets; -drop test/tip over test for large and bulky toys; -torque test; -tension test, general procedure; -tension test for seams in soft-filled (stuffed) toys, beanbag-type toys and other similar filled toys, if applicable; -impact test for magnets; -compression test; -tension test for magnets;)	-	200	5% discount for BIS
4.32 - 5.38.2( Yo-yo balls - length (lo) of the yo-yo ball tether)	-	200	5% discount for BIS
4.32 - 5.38.1( Yo-yo balls - The ratio of the mass m (in grams) to the elastic constant k of the yo-yo ball tether(m/k))	-	200	5% discount for BIS
4.33 - 5.11.3(Straps intended to be worn fully or partially around the neck-breakaway feature separation test)	-	150	5% discount for BIS
4.34(Sledges and toboggans with cords for pulling)	-	200	5% discount for BIS
4.35.3 - 5.39(Jaw entrapment in handles and steering wheels-jaw entrapment test)	-	100	5% discount for BIS

Complete

19 Mar, 2023

IS 16444 : Part 2 (2017)

AC static transformer operated watthour and var - Hour smart meters, class 0.2 S, 0.5 S and 1.0 S: Part 2 specification transformer operated smart meters

229500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.8.1(Additional information)	-	0	Charges Covered in Marking of meter Name plate Cl. 6.8
6.8(Connection diagrams and terminal marking)	-	0	Charges Covered in Marking of meter Name plate Cl. 6.8
6.8(BIS Standard Mark)	-	0	Charges Covered in Marking of meter Name plate Cl. 6.8
6.8(Marking of meters Name plate)	-	1200	5% discount for BIS
6.3(Clearance and creepage distances)	-	500	5% discount for BIS
10.0(Smart Meter Functional Requirements)	-	12000	5% discount for BIS
9.3(Test of Display)	-	200	5% discount for BIS
7, 9.4(Data Exchange for Electricity Meter Reading, Tariff and Load Control Companion Specification (The requirement as per IS 15959 : Part 1 & Part 3 shall apply))	-	56000	5% discount for BIS
6.4(Test of resistance to heat and fire)	-	4000	5% discount for BIS
Note b of Table 1(Access and data read test)	-	1500	5% discount for BIS
Note a of Table 1(Accuracy of the meter at pre-defined points)	-	200	5% discount for BIS
6.5(Test of protection against penetration of dust and water)	-	5500	5% discount for BIS
6.5(Spring hammer test)	-	300	5% discount for BIS
6.5(Shock test)	-	4500	5% discount for BIS
6.5(Vibration test)	-	7000	5% discount for BIS
6.9(Damp heat cyclic test)	-	5800	5% discount for BIS
6.9(Cold test)	-	4000	5% discount for BIS
6.9(Dry heat test)	-	1200	5% discount for BIS
6.11(Test of immunity to electrostatic discharge)	-	7500	5% discount for BIS
6.11(Fast transient burst test)	-	12500	5% discount for BIS
6.11(Radio interference measurement)	-	25000	5% discount for BIS
6.10.7(Test of immunity to earth/phase fault)	-	2500	5% discount for BIS
6.10.5(Test of influence of heating)	-	1500	5% discount for BIS
6.10.4(Test of influence of self-heating)	-	1200	5% discount for BIS
6.10.3(Test of influence of short time over currents)	-	5000	5% discount for BIS
6.10.2(Test of influence of supply voltage)	-	10500	5% discount for BIS
6.10.1(Test of power consumption)	-	700	5% discount for BIS
6.12(Operation of Accessories)	-	1000	5% discount for BIS
6.12(Abnormal Magnetic Induction of External Origin 10mT)	-	1500	5% discount for BIS
6.12(Magnetic induction of External Origin 0.5mT)	-	1500	5% discount for BIS
6.12(Continuous Magnetic Induction of External Origin 0.2 Tesla)	-	1500	5% discount for BIS
6.12(Continuous Magnetic Induction of External Origin 67 milli Tesla)	-	1500	5% discount for BIS
6.12(Voltage Unbalanced)	-	500	5% discount for BIS
6.12(Reversed Phase Sequence)	-	500	5% discount for BIS
6.12(Waveform 10% of 3rd Harmonics)	-	1200	5% discount for BIS
6.12(Frequency Variation)	-	500	5% discount for BIS
6.12(Voltage Variation)	-	500	5% discount for BIS
6.12(Test of influence quantities)	-	2000	additional Test wise charges as per added
6.12(Test of repeatability of error)	-	3500	5% discount for BIS
6.12(Test of ambient temperature influence)	-	2500	5% discount for BIS
6.12(Test of no-load condition)	-	500	5% discount for BIS
6.12(Test of starting condition)	-	500	5% discount for BIS
6.12(Test of meter constant)	-	1000	5% discount for BIS
6.12(Test on limits of error)	-	2000	5% discount for BIS
6.10.6(Insulation test)	-	500	5% discount for BIS
6.10.6(ac high voltage test)	-	500	5% discount for BIS
6.10.6(Impulse voltage test)	-	4000	5% discount for BIS
6.7(Output device)	-	1500	5% discount for BIS
6.6(Display of measured values)	-	500	5% discount for BIS
6.2.2(Insulating encased meter)	-	0	Charges Covered in General and constructional requirements Cl. 6.2
6.2.2(Terminal Cover(s))	-	0	Charges Covered in General and constructional requirements Cl. 6.2
6.2.1(Terminals, terminal block and protective earth terminal)	-	0	Charges Covered in General and constructional requirements Cl. 6.2
6.2(Communication module)	-	0	Charges Covered in General and constructional requirements Cl. 6.2
6.2(Window)	-	0	Charges Covered in General and constructional requirements Cl. 6.2
6.2(Meter case)	-	0	Charges Covered in General and constructional requirements Cl. 6.2
6.2(General Constructional requirements)	-	2000	5% discount for BIS
6.1(Electrical Requirments)	-	0	Qualitative
6.1(Electrical Requirments)	-	0	Qualitative
6.1(Electrical Requirments)	-	0	Qualitative
6.1(Electrical Requirments)	-	0	Qualitative
6.1(Electrical Requirments)	-	0	Qualitative
6.12((11 of IS 14697 ) Accuracy Requirement )	-	0	Test wise charges as per added
6.8(Inspection )	-	0	Charges Covered in Marking of meter Name plate Cl. 6.8
6.8(Inspection ( 7 of IS 14697) )	-	0	Charges Covered in Marking of meter Name plate Cl. 6.8
8, 9.5(Smart Meter Communicability)	-	18000	5% discount for BIS
6.11(Surge Immunity test)	-	10000	5% discount for BIS
6.11(Test of immunity to electromagnetic HF field)	-	12500	5% discount for BIS

Complete

19 Mar, 2023

IS 16102 : Part 2 (2017)

Self - Ballasted led lamps for general lighting services: Part 2 performance requirements (First Revision)

190000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Dimensions)	-	2500	5% discount for BIS
8(Lamp Input)	-	15000	5% discount for BIS
9(light output)	-	17500	5% discount for BIS
10(Colour Nomenclature, Variation and Rendering)	-	30000	5% discount for BIS
11(Lamp Life)	-	125000	5% discount for BIS

Complete

19 Mar, 2023

IS 7872 (2020)

Deep Freezers - Specification ( Second Revision )

162500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.8(Doors & Fittings)	-	0	-
5.5(Strength Pressure test for components)	-	0	-
5.6(External surface condensation test)	-	0	-
5.1(Sound level)	-	0	-
6(Measurement of freezer storage capacity)	-	0	-
6.11(Volume measurement Water fill method)	-	0	-
9.1(No load test)	-	0	-
9.2.1(Pull down time)	-	0	-
9.2.2(Power consumption & percentage running time)	-	0	-
10.2.1(Door seal test )	-	0	-
10.2.2(Machanical strength of shelves and similar components)	-	0	-
10.2.3(Thermal insulation test )	-	0	-
10.2.5(High voltage test)	-	0	-
10.2.6(Insulation resistance test)	-	0	-
10.2.7(Leakage current test )	-	0	-
10.2.8(Earth resistance test )	-	0	-
10.2.10(Full load test)	-	0	-
10.2.11(Measurement )	-	0	-
10.2.12(Temperature rise test)	-	0	-
5(Refrigeration system)	-	0	-
6(Safety Requirements)	-	76000	5% discount for BIS
7(Sound Pressure Level)	-	5000	5% discount for BIS
8(Freezer Storage Capacity)	-	7500	5% discount for BIS
11.1(No load Pull down Test)	-	10000	5% discount for BIS
11.2(Energy Consumption Test)	-	22500	5% discount for BIS
11.3(Temperature Rise Test)	-	10000	5% discount for BIS
11.4(Door Seal Test)	-	4000	5% discount for BIS
11.5(Mechanical Strength of Shelves and Similar Components)	-	4000	5% discount for BIS
11.6(Thermal Insulation Test ( External Condensation))	-	5000	5% discount for BIS
11.7(Pressure Test)	-	12000	5% discount for BIS
13(Marking and Instruction)	-	1000	5% discount for BIS

Complete

19 Mar, 2023

1
2
3
Next
Last

Bureau of Indian Standards

The National Standards Body of India

Bharat Test House Pvt Ltd 1474 Haryana

1474, HSIIDC Rai Industrial Estate, SONIPAT, Sonipat, Haryana, 131029

9310314585 bthrai@bharattesthouse.com

Scope List