BIS - LIMS (Laboratory Information Management System)

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

198-199, MIE, Industrial Area, Phase-1, Bahadurgarh, Haryana, Bahadurgarh, Jhajjar, Haryana, 124507

9818233966 info@alphatesthouse.com

Scope List

Reset

148 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

121

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

230000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	50000	(Extra EMI/EMC charges: 1,80,000/-)
8.1.1(Protection against live parts in all positions)	-	50000	-
8.1.2(Protection against live parts in openings)	-	50000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	50000	-
8.1.4(Protection against live parts against protective impedance)	-	50000	-
10.1(Power input)	-	50000	-
10.2(Current input)	-	50000	-
11.1(General)	-	50000	-
11.2(General)	-	50000	-
11.3(Heating)	-	50000	-
13.1(General)	-	50000	-
13.2(Leakage current at operating temperature)	-	50000	-
13.3(Electric Strength at operating temperature)	-	50000	-
14(Transient Over Voltages)	-	50000	-
15.0(General)	-	50000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	50000	-
15.2(Spillage Test)	-	50000	-
15.3(Humidity Test)	-	50000	-
16.0(General)	-	50000	-
16.1(General)	-	50000	-
16.2(Leakage Current (after Clause 15))	-	50000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	50000	-
17(Over Load Protection of Transformers and associated circuits)	-	50000	-
19(Abnormal Operation)	-	230000	(Extra EMI/EMC charges: 1,80,000/-)
20(Stability test)	-	50000	-
21(Mechanical Strength Test)	-	50000	-
22(Construction verification related test)	-	50000	-
23(General)	-	50000	-
24(Components)	-	50000	-
25(Supply connection and external flexible cords)	-	50000	-
26(Terminals for external conductors)	-	50000	-
27(Provision for earthing)	-	50000	-
28(Screw test and connections)	-	50000	-
29(clearance, creepage distances and solid insulation)	-	50000	-
30.1(Ball pressure test)	-	50000	-
30.2(Glow Wire Test)	-	50000	-
30.2(Needle Flame Test)	-	50000	-
4(General requirement)	-	50000	-
16(Leakage current and electric strength)	-	50000	-
17(Overload protection of transformers and associated circuits)	-	50000	-
18(Endurance)	-	50000	-
8.1.5(Live parts of built-in appliances)	-	50000	-
11.4(Heating appliances)	-	50000	-
11.5(Motor-operated appliances)	-	50000	-
11.6(Combined appliances)	-	50000	-
11.7(Duration corresponding)	-	50000	-
11.8(Temperature rise)	-	50000	-
4(General Requirement)	-	50000	-
5(General conditions for tests)	-	50000	-
6(Classification- IS 302-1)	-	50000	-
9(Starting of motor operation test requirements and tests)	-	50000	-
31(Resistance to Rusting)	-	50000	-
32(Radiation Toxicity and Similar Hazards)	-	50000	-
19.11.4.1(Electrostatic discharges)	-	50000	-
19.11.4.2(Radiated fields)	-	50000	-
19.11.4.3(Fast transient bursts)	-	50000	-
19.11.4.4(Surge immunity test)	-	50000	-
19.11.4.5(Immunity to conducted discharges)	-	50000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	50000	-
19.11.4.7(Harmonics)	-	50000	-
18(Endurance Test requirements and tests)	-	50000	(Extra EMI/EMC charges: 1,80,000/-)

08 May, 2028

-
Included w.e.f.19.06.2025 "(1)Cooking ranges, hobs, ovens and similar appliances, (2)Commercial Dispensing Appliances and Vending Machines, (3) spin extractors (For testing charges please refer relevant Part 2 standard in LIMS)"

122

IS 6587 (2023)

Textiles - Spun hemp yarn - Specification (second revision)

All

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Hemp Fibre)	-	5000	-
4.2(Yarn)	-	2000	-
4.3(Skein)	-	2000	-
5.1(Fibre Identification)	-	5000	-
5.3(Rot Proofing Treatment- Zinc content (in case Zinc Naphthenate is used))	-	1000	-
5.3(Rot Proofing Treatment- copper content (in case Copper Naphthenate is used))	-	1000	-
Cl. 5.2 Table-1(Variety no.)	-	1000	-
Cl. 5.2 Table-1(Linear Density- Untarred)	-	3000	-
Cl. 5.2 Table-1(Linear Density-Tarred)	-	3000	-
Cl. 5.2 Table-1(Turns Per Metre of Piled Yarn)	-	4000	-
Cl. 5.2 Table-1(Runnage (M/25 Kg),-Untarred)	-	4000	-
Cl. 5.2 Table-1(Runnage (M/25 Kg),-Tarred)	-	4000	-
Cl. 5.2 Table-1(Breaking Load (60cm Test Length) -Untarred)	-	4000	-
Cl. 5.2 Table-1(Breaking Load (60cm Test Length) - Tarred)	-	4000	-
Cl. 5.2 Table-1(Tar Content for Tarred Yarn)	-	2000	-
Cl. 5.2 Table-1(Ash Content)	-	2000	-
Cl. 5.2 Table-1(Water Soluble Matter Content)	-	3000	-
4.1(Hemp Fibre)	-	0	-
4.2(Yarn)	-	0	-
4.3(Skein)	-	0	-
5.1(Fibre Identification)	-	0	-
5.3(Rot Proofing Treatment- Zinc content (in case Zinc Naphthenate is used))	-	0	-
5.3(Rot Proofing Treatment- copper content (in case Copper Naphthenate is used))	-	0	-
Cl. 5.2 Table-1(Variety no.)	-	0	-
Cl. 5.2 Table-1(Linear Density- Untarred)	-	0	-
Cl. 5.2 Table-1(Linear Density-Tarred)	-	0	-
Cl. 5.2 Table-1(Turns Per Metre of Piled Yarn)	-	0	-
Cl. 5.2 Table-1(Runnage (M/25 Kg),-Untarred)	-	0	-
Cl. 5.2 Table-1(Runnage (M/25 Kg),-Tarred)	-	0	-
Cl. 5.2 Table-1(Breaking Load (60cm Test Length) -Untarred)	-	0	-
Cl. 5.2 Table-1(Breaking Load (60cm Test Length) - Tarred)	-	0	-
Cl. 5.2 Table-1(Tar Content for Tarred Yarn)	-	0	-
Cl. 5.2 Table-1(Ash Content)	-	0	-
Cl. 5.2 Table-1(Water Soluble Matter Content)	-	0	-
4.1(Hemp Fibre)	-	0	-
4.2(Yarn)	-	0	-
4.3(Skein)	-	0	-
5.1(Fibre Identification)	-	0	-
5.3(Rot Proofing Treatment- Zinc content (in case Zinc Naphthenate is used))	-	0	-
5.3(Rot Proofing Treatment- copper content (in case Copper Naphthenate is used))	-	0	-
Cl. 5.2 Table-1(Variety no.)	-	0	-
Cl. 5.2 Table-1(Linear Density- Untarred)	-	0	-
Cl. 5.2 Table-1(Linear Density-Tarred)	-	0	-
Cl. 5.2 Table-1(Turns Per Metre of Piled Yarn)	-	0	-
Cl. 5.2 Table-1(Runnage (M/25 Kg),-Untarred)	-	0	-
Cl. 5.2 Table-1(Runnage (M/25 Kg),-Tarred)	-	0	-
Cl. 5.2 Table-1(Breaking Load (60cm Test Length) -Untarred)	-	0	-
Cl. 5.2 Table-1(Breaking Load (60cm Test Length) - Tarred)	-	0	-
Cl. 5.2 Table-1(Tar Content for Tarred Yarn)	-	0	-
Cl. 5.2 Table-1(Ash Content)	-	0	-
Cl. 5.2 Table-1(Water Soluble Matter Content)	-	0	-
4.1(Hemp Fibre)	-	0	-
4.2(Yarn)	-	0	-
4.3(Skein)	-	0	-
5.1(Fibre Identification)	-	0	-
5.3(Rot Proofing Treatment- Zinc content (in case Zinc Naphthenate is used))	-	0	-
5.3(Rot Proofing Treatment- copper content (in case Copper Naphthenate is used))	-	0	-
Cl. 5.2 Table-1(Variety no.)	-	0	-
Cl. 5.2 Table-1(Linear Density- Untarred)	-	0	-
Cl. 5.2 Table-1(Linear Density-Tarred)	-	0	-
Cl. 5.2 Table-1(Turns Per Metre of Piled Yarn)	-	0	-
Cl. 5.2 Table-1(Runnage (M/25 Kg),-Untarred)	-	0	-
Cl. 5.2 Table-1(Runnage (M/25 Kg),-Tarred)	-	0	-
Cl. 5.2 Table-1(Breaking Load (60cm Test Length) -Untarred)	-	0	-
Cl. 5.2 Table-1(Breaking Load (60cm Test Length) - Tarred)	-	0	-
Cl. 5.2 Table-1(Tar Content for Tarred Yarn)	-	0	-
Cl. 5.2 Table-1(Ash Content)	-	0	-
Cl. 5.2 Table-1(Water Soluble Matter Content)	-	0	-

08 May, 2028

-
Included w.e.f 17.06.2025

123

IS 18161 (2023)

Textiles Light weight jute sacking bags for packing 50 kg mustard seed niger seed and ragi Specification

All

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Manufacture)	-	1000	-
4.1.1(Manufacture)	-	1000	-
4.2(Seam)	-	1000	-
4.2(Seam)	-	1000	-
4.2(Seam)	-	1000	-
Cl-4.2(Seam)	-	1000	-
4.3(Safety Stitch)	-	1000	-
4.3(Safety Stitch)	-	1000	-
4.4(Hemming at the Mouth)	-	1000	-
4.4(Hemming at the Mouth)	-	1000	-
Cl-4.5(Freedom from Defects)	-	1000	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	1000	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	1000	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	1000	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	1000	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	1000	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	1000	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	1000	-
Cl-4.1.1 & 5.1, Table 1, i (a)(Dimensions-Outside length, cm)	-	1000	-
Cl-4.1.1 & 5.1, Table 1, i (b)(Dimensions- Outside width, cm)	-	1000	-
Cl-4.1.1 & 5.1, Table 1 (ii)(Ends/dm)	-	1000	-
Cl-4.1.1 & 5.1, Table 1, iii(Picks/dm)	-	1000	-
Cl-4.1.1 & 5.1, Table 1, iv(Corrected mass/bag, g, percent)	-	2000	-
Cl-4.1.1 & 5.1, Table 1, v (a)(Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): - Warp way)	-	2000	-
Cl-4.1.1 & 5.1, Table 1, v (b)(Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): - Weft way)	-	2000	-
Cl-4.1.1 & 5.1, Table 1, vi(Average seam strength (5 cm × 20 cm ravelled strip), Min, N (kgf))	-	1000	-
Cl-4.1.1 & 5.1, Table 1, vii(Moisture regain, percent, Max)	-	2000	-
Cl-4.1.1 & 5.1, Table 1, viii(Oil content on dry de-oiled material, Max)	-	2000	-
Cl-5.2, Table 2 (i)(Total number of bags per bale)	-	2000	-
5.4.2.1, Table 3, i(Non-halogenated hydrocarbons)	-	5000	-
5.4.2.1, Table 3, ii(Pesticides (Sum parameter))	-	5000	-
5.4.2.1, Table 3, iii(pH of aqueous extract)	-	1000	-
5.4.2.1, Table 3, iv(Coupled amines from azo-dyes)	-	5000	-

08 May, 2028

-
-

124

IS 17788 (2021)

Medical Textiles Nonwoven Fabric for Wipes Specification

ALL

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 6.1, Table 1, (i)(Fibre identification)	-	10000	-
Clause 6.1, table 1, (ii)(Weight per square metre, g/m2)	-	1000	-
Caluse 6.1, Table 1, (iii) (a)(Absorption a) Sinking time, s, Max)	-	1000	-
Caluse 6.1, Table 1, (iii) (b)(Absorption b) Water holding capacity, percent, Min)	-	1000	-
Clause 6.1 , Table 1, (iv) (a)(Breaking strength (dry), N, Min a) Machine direction)	-	1000	-
Clause 6.1 , Table 1, (iv) (b)(Breaking strength (dry), N, Min b) Cross direction)	-	1000	-
Clause 6.1, Table 1, (v) (a)(Breaking strength (wet), N, Min a) Machine direction)	-	1000	-
Clause 6.1, Table 1, (v) (b)(Breaking strength (wet), N, Min b) Cross direction)	-	1000	-
Clause 6.1, Table 1, (vi)(pH)	-	1000	-

08 May, 2028

-
Included w.e.f 17.06.2025

125

IS 17349 (2020)

Medical textiles – Shoe covers – Specification

ALL

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Workmanship and finish)	-	1000	-
5.2 - Table 1 - (i)(Cleanliness - Microbial)	-	5000	-
5.2 - Table 1 - (ii)(Tensile Strength)	-	1000	-
5.2 - Table 1 - (iii)(Bursting Strength)	-	1000	-
6(Packing)	-	1000	-
7(Marking)	-	1000	-
5(Requirements)	-	1000	-
5.1(Workmanship and Finish)	-	1000	-
5.2- Table 1- i)(Cleanliness – Microbial)	-	5000	-
5.2- Table 1- ii)(Tensile strength)	-	1000	-
5.2- Table 1- iii)(Bursting strength)	-	2000	-
6(Packing)	-	1000	-
7(Marking)	-	1000	-

08 May, 2028

-
Included w.e.f 03.06.2025

126

IS 17634 (2022)

Storage Units - Specification

storage units

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CLAUSE 5(DIMENSIONS)	-	35000	-
CLAUSE 6(SURFACE PERFORMANCE)	-	35000	-
CLAUSE 6.2(Fabric and Leather (Synthetic and Natural) Performance)	-	35000	-
CLAUSE 7.1(SAFETY TESTS (General))	-	35000	-
CLAUSE 7.2(Test for Non-Movable Parts)	-	35000	-
CLAUSE 7.2.1(Shelves)	-	35000	-
CLAUSE 7.2.1.2(Deflection of shelves)	-	35000	-
CLAUSE 7.2.2.1(Sustained load test for tops and bottoms)	-	35000	-
CLAUSE 7.2.2.2(Static load test for tops and bottoms)	-	35000	-
CLAUSE 7.2.3.1(Strength of clothes-rail supports)	-	35000	-
CLAUSE 7.2.3.2(Dislodgement of clothes rail)	-	35000	-
CLAUSE 7.2.4.2(Drop test)	-	35000	-
CLAUSE 7.2.4.3(Tests for units with castors or wheels)	-	35000	-
CLAUSE 7.3.1(Pivoted Doors)	-	35000	-
CLAUSE 7.3.1.2.1(Vertical load on pivoted door)	-	35000	-
CLAUSE 7.3.1.2.2(Horizontal load on pivoted door)	-	35000	-
CLAUSE 7.3.1.3(Slam-shut test of pivoted doors)	-	35000	-
CLAUSE 7.3.1.4(Durability of pivoted doors)	-	35000	-
CLAUSE 7.3.2(Sliding Doors and Horizontal Roll-fronts)	-	35000	-
CLAUSE 7.3.2.2(Slam shut/open test of sliding doors and horizontal roll-fronts)	-	35000	-
CLAUSE 7.3.2.3(Durability of sliding doors and horizontal roll-fronts)	-	35000	-
CLAUSE 7.3.3(Flaps)	-	35000	-
CLAUSE 7.3.3.1(Strength of bottom-hinged flaps)	-	35000	-
CLAUSE 7.3.3.2(Durability of flaps)	-	35000	-
CLAUSE 7.3.3.3(Drop test for top-hinged flaps)	-	35000	-
CLAUSE 7.3.4(Vertical Roll-Fronts)	-	35000	-
CLAUSE 7.3.4.1(Slam shut/open test of vertical roll-fronts)	-	35000	-
CLAUSE 7.3.4.2(Durability of vertical roll-fronts)	-	35000	-
CLAUSE 7.3.5(Extension Element)	-	35000	-
CLAUSE 7.3.5.2(Strength of extension elements)	-	35000	-
CLAUSE 7.3.5.3(Durability of extension elements)	-	35000	-
CLAUSE 7.3.5.4(Slam shut/open test of extension element)	-	35000	-
CLAUSE 7.3.5.5(Displacement of extension element bottoms)	-	35000	-
CLAUSE 7.3.5.6(Interlock test)	-	35000	-
CLAUSE 7.3.6(Locking and Latching Mechanism Tests)	-	35000	-
CLAUSE 7.3.6.2(Strength test for locking and latching mechanisms for extension elements)	-	35000	-
CLAUSE 7.3.6.3(Locking and latching mechanisms for doors, flaps and roll-fronts)	-	35000	-
CLAUSE 7.3.6.4(Durability test of locking and latching mechanisms)	-	35000	-
CLAUSE 7.3.7(Pull Force Test)	-	35000	-
CLAUSE 7.3.7(Pull Force Test)	-	35000	-
CLAUSE 7.3.8(Top Load Ease Cycle Test)	-	35000	-
CLAUSE 7.3.9(Durability Test for Units with Seating Surfaces – Cyclic Impact)	-	35000	-
CLAUSE 7.3.10("Drop Test – Dynamic – for Units with Seat Surfaces")	-	35000	-
CLAUSE 7.4.1.3(Sustained load test (overload))	-	35000	-
CLAUSE 7.4.1.4(Dislodgement test)	-	35000	-
CLAUSE 7.5(Stability Tests)	-	35000	-
CLAUSE 7.5.2.1("Units that can be adjusted to a Height of 1 000 mm or less")	-	35000	-
CLAUSE 7.5.2.2("Units that can be adjusted to a height of more than 1 000 mm")	-	35000	-
CLAUSE 7.5.3(Opening Doors, Extension Elements and Flaps, All Storage Units Unloaded)	-	35000	-
CLAUSE 7.5.6(Vertical Force Stability Test for Storage Units)	-	35000	-
CLAUSE 7.5.7(Stability Test for Pedestals/Storage Units with Seat Surfaces)	-	35000	-
CLAUSE 7.5.8("Dynamic Stability Test for Units with Castors")	-	35000	-
CLAUSE 7.5.9(Strength Test for Wall Attachments)	-	35000	-
Cl-6.1 (a)(Resistance to mechanical damage)	-	35000	-
Cl-6.1 (b)(Pencil hardness)	-	35000	-
Cl-6.1 (c)(Resistance to wet heat)	-	35000	-
Cl-6.1 (d)Cl-6.1 (d)(Resistance to dry heat)	-	35000	-
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	35000	-
Cl-6.1 (f)(Resistance to marking by cold oils and fats Resistance to marking by cold oils and fats)	-	35000	-
Cl-6.1 (g)(Adhesive performance)	-	35000	-
Cl-6.2 (a) 1(Breaking load)	-	35000	-
Cl-6.2 (a) 2(Elongation at break)	-	35000	-
Cl-6.2 (a) 3(Tear strength)	-	35000	-
Cl-6.2 (a) 4(Colour fastness to light)	-	35000	-
Cl-6.2 (a) 5(Colour fastness to rubbing)	-	35000	-
Cl-6.2 (a) 6(Colour fastness to perspiration)	-	35000	-
Cl-6.2 (a) 7(Colour fastness to water)	-	35000	-
Cl-6.2 (a) 8(Pilling resistance)	-	35000	-
Cl-6.2 (a) 9(Coating adhesion strength)	-	35000	-
Cl-6.2 (a) 10(Seam slippage)	-	35000	-
Cl-6.2 (a) 11(Resistance to damage by flexing)	-	35000	-
Cl-6.2 (a) 12(Abrasion resistance)	-	35000	-
Cl-6.2 (a) 13(Bursting strength)	-	35000	-
Cl-6.2 (a) 14(Resistance to cold)	-	35000	-
Cl-6.2 (b) 1(Tear strength)	-	35000	-
Cl-6.2 (b) 2(Flexing endurance)	-	35000	-
Cl-6.2 (b) 3(Finish adhesion)	-	35000	-
Cl-6.2 (b) 4(Colour fastness to artificial light)	-	35000	-
Cl-6.2 (b) 5(Colour fastness to rubbing)	-	35000	-
Cl-6.2 (b) 6(Colour fastness to water spotting)	-	35000	-
Cl-6.2 (b) 7(Water vapour permeability)	-	35000	-
Cl-6.2 (b) 8(Colour fastness to water)	-	35000	-
Cl-7.1(General)	-	35000	-
Cl-7.2.1(Shelves)	-	35000	-
Cl-7.2.2(Tops and Bottoms)	-	35000	-
Cl-7.2.3(Strength of Clothes Rails and their Supports)	-	35000	-
Cl-7.2.4(Strength of the Structure)	-	35000	-
Cl-7.3.1(Pivoted Doors)	-	35000	-
Cl-7.3.2(Sliding Doors and Horizontal Roll-fronts)	-	35000	-
Cl-7.3.3(Flaps)	-	35000	-
Cl-7.3.4(Vertical Roll-Fronts)	-	35000	-
Cl-7.3.5(Extension Elements)	-	35000	-
Cl-7.3.6(Locking and Latching Mechanism Test)	-	35000	-
Cl-7.3.7(Pull Force Test)	-	35000	-
Cl-7.3.8(Top Load Ease Cycle Test)	-	35000	-
Cl-7.3.9(Durability Test for Units with Seating Surfaces – Cyclic Impact)	-	35000	-
Cl-7.3.10(Drop Test – Dynamic – for Units with Seat Surfaces)	-	35000	-
Cl-7.4.1(Units Not Supported by the Floor)	-	35000	-
Cl-7.4.2(Units Supported by the Floor)	-	35000	-
Cl-7.5.1(General)	-	35000	-
Cl-7.5.2(Doors, Extension Elements and Flaps Closed, All Storage Units Unloaded)	-	35000	-
Cl-7.5.3(Opening Doors, Extension Elements and Flaps, All Storage Units Unloaded)	-	35000	-
Cl-7.5.4(Doors, Extension Elements and Flaps Opened and Unlocked)	-	35000	-
Cl-7.5.5(Doors, Extension Elements and Flaps Closed and Locked, All Storage Units Loaded)	-	35000	-
Cl-7.5.6(Vertical Force Stability Test for Storage Units)	-	35000	-
Cl-7.5.7(Stability Test for Pedestals/Storage Units with Seat Surfaces)	-	35000	-
Cl-7.5.8(Dynamic Stability Test for Units with Castors)	-	35000	-
Cl-7.5.9(Strength Test for Wall Attachments)	-	35000	-
Cl-9(Marking)	-	35000	-

08 May, 2028

-
Included w.e.f 03.06.2025

127

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.5(Components)	-	50000	5% discount for BIS
1.6(Power interface .)	-	50000	5% discount for BIS
1.7(Markings and instructions)	-	50000	5% discount for BIS
2.1(Protection from electric shock and energy hazards)	-	50000	5% discount for BIS
2.2(SELV circuits)	-	50000	5% discount for BIS
2.3(TNV circuits)	-	50000	5% discount for BIS
2.4(Limited current circuits)	-	50000	5% discount for BIS
2.5(Limited power sources .)	-	50000	5% discount for BIS
2.6(Provisions for earthing and bonding)	-	50000	5% discount for BIS
2.7(Overcurrent and earth fault protection in primary circuits)	-	50000	5% discount for BIS
2.8(Safety interlocks)	-	50000	5% discount for BIS
2.9(Electrical insulation)	-	50000	5% discount for BIS
2.10(Clearances, creepage distances and distances through insulation)	-	50000	5% discount for BIS
3.1(General)	-	50000	5% discount for BIS
3.2(Connection to a mains supply)	-	50000	5% discount for BIS
3.3(Wiring terminals for connection of external conductors)	-	50000	5% discount for BIS
3.4(Disconnection from the mains supply)	-	50000	5% discount for BIS
3.5(Interconnection of equipment)	-	50000	5% discount for BIS
4.1(Stability)	-	50000	5% discount for BIS
4.2(Mechanical strength)	-	50000	5% discount for BIS
4.3(Design and construction)	-	50000	5% discount for BIS
4.4(Protection against hazardous moving parts)	-	50000	5% discount for BIS
4.5(Thermal requirements)	-	50000	5% discount for BIS
4.6(Openings in enclosures)	-	50000	5% discount for BIS
4.7(Resistance to fire)	-	50000	5% discount for BIS
5.1(Touch current and protective conductor curren)	-	50000	5% discount for BIS
5.2(Electric strength)	-	50000	5% discount for BIS
5.3(Abnormal operating and fault conditions)	-	50000	5% discount for BIS
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	50000	5% discount for BIS
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	50000	5% discount for BIS
6.3(Protection of the telecommunication wiring system from overheating)	-	50000	5% discount for BIS
7.1(General)	-	50000	5% discount for BIS
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	50000	5% discount for BIS
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	50000	5% discount for BIS
7.4(Insulation between primary circuits and cable distribution systems)	-	50000	5% discount for BIS
1.5(Components)	-	50000	5% discount for BIS
2.8.2/2.8.5(Interlock switches)	-	50000	5% discount for BIS
2.8.7(Switches and Relay)	-	50000	5% discount for BIS
2.10.4.2(Material Group and Comparative Tracking Index)	-	50000	5% discount for BIS
2.10.5.3(Insulating Compound as Solid Insulation)	-	50000	5% discount for BIS
2.10.5.6(Thin sheet materials)	-	50000	5% discount for BIS
2.10.5.11(SMPS Transformer and Inductor)	-	50000	5% discount for BIS
2.10.5.12(Wires in wound components)	-	50000	5% discount for BIS
2.10.5.13(Winding wire)	-	50000	5% discount for BIS
2.10.5.14(Additional insulation in wound components)	-	50000	5% discount for BIS
2.10.6(PCB material)	-	50000	5% discount for BIS
2.10.8.2(Thermal conditioning (thermal ageing))	-	50000	5% discount for BIS
2.10.8.4(Abrasion resistance test)	-	50000	5% discount for BIS
2.10.9(Thermal Cycling)	-	50000	5% discount for BIS
2.10.10(Test for Pollution Degree 1 environment and for insulating compound)	-	50000	5% discount for BIS
2.10.12(Enclosed and sealed parts)	-	50000	5% discount for BIS
3.1.4(Internal wire)	-	50000	5% discount for BIS
3.2.4(Appliance inlet /connector)	-	50000	5% discount for BIS
3.2.4(Appliance inlet /connector)	-	50000	5% discount for BIS
3.2.5(Non re-wirable plug with PVC sheathed cable)	-	50000	5% discount for BIS
4.3.8(Batteries)	-	50000	5% discount for BIS
4.3.10(Dust, powders, liquids and gases)	-	50000	5% discount for BIS
4.3.13.5(LED, laser class)	-	50000	5% discount for BIS
Annex A3(Hot flaming oil test)	-	50000	5% discount for BIS
Annex B(Motor tests under abnormal conditions)	-	50000	5% discount for BIS
Annex C(Transformers)	-	50000	5% discount for BIS
Annex DD(Requirements for the mounting means of a rack mounted equipment)	-	50000	5% discount for BIS
Annex EE(Household and home/ office document/ media shredders)	-	50000	5% discount for BIS
4.6.2(Bottoms of fire enclosures)	-	50000	5% discount for BIS
2.10.11(Tests for semiconductor devices and for cemented joints)	-	50000	5% discount for BIS
Annex Q(Voltage Dependent Resistors)	-	50000	5% discount for BIS

08 May, 2028

-
Included w.e.f 17.06.2025 Exclusions: Components (Cl.1.5), Moving parts (Cl.2.8.5), Switches and relays (Cl.2.8.7),Semiconductor devices (Cl.2.10.5.4), Non separable thin sheet material (Cl.2.10.5.8 Annex-AA), AC power supply cord (Cl.3.2.5.1), Cathode ray tubes (Cl.4.2.8), Batteries (Cl.4.3.8), Oil and grease (Cl.4.3.9), Protection in operator wedge probe (household and home/office document /media shredders) (Cl.4.4.2), Ionizing radiation (Cl.4.3.13.2), Effect of ultraviolet (UV) radiation on materials (Cl.4.3.13.3), Human exposure of to ultraviolet (UV) radiation (Cl.4.3.13.4), Effect of lasers (including LEDs) (Cl.4.3.13.5), Insulating winding wires (Annex-U), Evaluation of IC current limiters (Annex-CC), household and home/office document /media shredders (Annex-EE)

128

IS 17636 (2021)

Bunk Beds - Specification

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CLAUSE 4(DESIGN AND WORKMANSHIP)	-	25000	-
CLAUSE 5(DIMENSIONS)	-	25000	-
CLAUSE 6(SURFACE PERFORMANCE)	-	25000	-
CLAUSE 7.5.1(Attachment, Deflection and Strength of Ladder and Treads)	-	25000	-
CLAUSE 7.6(Strength of Frame and Fastenings)	-	25000	-
CLAUSE 7.7(Stability Test)	-	25000	-
CLAUSE 7.8(Fastening of Upper Bed to Lower Bed)	-	25000	-
Cl-5(Dimensions)	-	25000	-
Cl-6.1 (a)(Resistance to mechanical damage)	-	25000	-
Cl-6.1 (b)(Pencil hardness)	-	25000	-
Cl-6.1 (c)(Resistance to wet heat)	-	25000	-
Cl-6.1 (d)(Resistance to dry heat)	-	25000	-
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	25000	-
Cl-6.1 (f)(Resistance to marking by cold oils and fats)	-	25000	-
Cl-6.1 (g)(Adhesive performance)	-	25000	-
Cl-6.2 (a) 1(Breaking load)	-	25000	-
Cl-6.2 (a) 2(Elongation at break)	-	25000	-
Cl-6.2 (a) 3(Tear strength)	-	25000	-
Cl-6.2 (a) 4(Colour fastness to light)	-	25000	-
Cl-6.2 (a) 5(Colour fastness to rubbing)	-	25000	-
Cl-6.2 (a) 6(Colour fastness to perspiration)	-	25000	-
Cl-6.2 (a) 7(Colour fastness to water)	-	25000	-
Cl-6.2 (a) 8(Pilling resistance)	-	25000	-
Cl-6.2 (a) 9(Coating adhesion strength)	-	25000	-
Cl-6.2 (a) 10(Seam slippage)	-	25000	-
Cl-6.2 (a) 11(Resistance to damage by flexing)	-	25000	-
Cl-6.2 (a) 12(Abrasion resistance)	-	25000	-
Cl-6.2 (a) 13(Bursting strength)	-	25000	-
Cl-6.2 (a) 14(Resistance to cold)	-	25000	-
Cl-6.2 (b) 1(Tear strength)	-	25000	-
Cl-6.2 (b) 2(Flexing endurance)	-	25000	-
Cl-6.2 (b) 3(Finish adhesion)	-	25000	-
Cl-6.2 (b) 4(Colour fastness to artificial light)	-	25000	-
Cl-6.2 (b) 5(Colour fastness to rubbing)	-	25000	-
Cl-6.2 (b) 6(Colour fastness to water spotting)	-	25000	-
Cl-6.2 (b) 7(Water vapour permeability)	-	25000	-
Cl-6.2 (b) 8(Colour fastness to water)	-	25000	-
Cl-7.1(general test conditions)	-	25000	-
Cl-7.2.1(Top Bed Safety Barriers)	-	25000	-
Cl-7.2.2(Top Bed Safety Barriers)	-	25000	-
Cl-7.2.3(Top Bed Safety Barriers)	-	25000	-
Cl-7.2.4(Top Bed Safety Barriers)	-	25000	-
Cl-7.3.1(Gaps)	-	25000	-
Cl-7.3.2(Gaps)	-	25000	-
Cl-7.4.1(Bed Base)	-	25000	-
Cl-7.4.2(Bed Base)	-	25000	-
Cl-7.5.1(Attachment, Deflection and Strength of Ladder and Treads)	-	25000	-
Cl-7.5.2(Dimensions of Treads)	-	25000	-
Cl-7.6(Strength of Frame and Fastenings)	-	25000	-
Cl-7.7(Stability)	-	25000	-
Cl-7.8(Fastening of Upper Bed to Lower Bed)	-	25000	-
Cl-10(Marking)	-	25000	-
CLAUSE 6.2(Fabric and Leather (Synthetic and Natural) Performance)	-	25000	-

08 May, 2028

-
Included w.e.f 03.06.2025

129

IS 17635 (2022)

Beds - Specification

ALL

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CLAUSE 4(Design and workmanship)	-	35000	-
CLAUSE 5(Dimensions)	-	35000	-
CLAUSE 6(SURFACE PERFORMANCE)	-	35000	-
CLAUSE 6.2(Fabric and Leather (Synthetic and Natural) Performance)	-	35000	-
CLAUSE 7(SAFETY TESTS)	-	35000	-
CLAUSE 7.3(Stability Test)	-	35000	-
CLAUSE 7.4(Vertical Static Load Tests)	-	35000	-
CLAUSE 7.5(Horizontal Static Load Tests)	-	35000	-
CLAUSE 7.5.2(Horizontal Static Load Test of Beds Without Headboard)	-	35000	-
CLAUSE 7.6.1(Vertical Durability Test of Bed Base)	-	35000	-
CLAUSE 7.6.2(Horizontal Durability Test of Bed Frame)	-	35000	-
CLAUSE 7.6.3(Horizontal Durability Test of Headboards)	-	35000	-
CLAUSE 7.7(Vertical Impact Test)	-	35000	-
CLAUSE 8.1(Mechanisms for Lifting Bed Bases)	-	35000	-
CLAUSE 8.2(Extendable Storage Elements)	-	35000	-
Cl-5(Dimensions)	-	35000	-
Cl-6.1 (a)(Resistance to mechanical damage)	-	35000	-
Cl-6.1 (b)(Pencil hardness)	-	35000	-
Cl-6.1 (c)(Resistance to wet heat)	-	35000	-
Cl-6.1 (d)(Resistance to dry heat)	-	35000	-
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	35000	-
Cl-6.1 (f)(Resistance to marking by cold oils and fats)	-	35000	-
Cl-6.1 (g)(Adhesive performance)	-	35000	-
Cl-6.2 (a) 1(Breaking load)	-	35000	-
Cl-6.2 (a) 2(Elongation at break)	-	35000	-
Cl-6.2 (a) 3(Tear strength)	-	35000	-
Cl-6.2 (a) 4(Colour fastness to light)	-	35000	-
Cl-6.2 (a) 5(Colour fastness to rubbing)	-	35000	-
Cl-6.2 (a) 6(Colour fastness to perspiration)	-	35000	-
Cl-6.2 (a) 7(Colour fastness to water)	-	35000	-
Cl-6.2 (a) 8(Pilling resistance)	-	35000	-
Cl-6.2 (a) 9(Coating adhesion strength)	-	35000	-
Cl-6.2 (a) 10(Seam slippage)	-	35000	-
Cl-6.2 (a) 11(Resistance to damage by flexing)	-	35000	-
Cl-6.2 (a) 12(Abrasion resistance)	-	35000	-
Cl-6.2 (a) 13(Bursting strength)	-	35000	-
Cl-6.2 (a) 14(Resistance to cold)	-	35000	-
Cl-6.2 (b) 1(Tear strength)	-	35000	-
Cl-6.2 (b) 2(Flexing endurance)	-	35000	-
Cl-6.2 (b) 3(Finish adhesion)	-	35000	-
Cl-6.2 (b) 4(Colour fastness to artificial light)	-	35000	-
Cl-6.2 (b) 5(Colour fastness to rubbing)	-	35000	-
Cl-6.2 (b) 6(Colour fastness to water spotting)	-	35000	-
Cl-6.2 (b) 7(Water vapour permeability)	-	35000	-
Cl-6.2 (b) 8(Colour fastness to water)	-	35000	-
Cl-7.1(Safety Tests)	-	35000	-
Cl-7.2(Safety Tests)	-	35000	-
Cl-7.3(Stability Test)	-	35000	-
Cl-7.4.1(Vertical Static Load on Bed Base)	-	35000	-
Cl-7.4.2(Vertical Static Load on Side Rail)	-	35000	-
Cl-7.5.1(Horizontal Static Load on Headboard)	-	35000	-
Cl-7.5.2(Horizontal Static Load Test of Beds Without Headboard)	-	35000	-
Cl-7.6.1(Vertical Durability Test of Bed Base)	-	35000	-
Cl-7.6.2(Horizontal Durability Test of Bed Frame)	-	35000	-
Cl-7.6.3(Horizontal Durability Test of Headboards)	-	35000	-
Cl-7.7(Vertical Impact Test)	-	35000	-
Cl-8.1.2(Durability of Mechanisms for Lifting Bed Bases)	-	35000	-
Cl-8.2.2(Durability of Extendable Storage Elements)	-	35000	-
Cl-10(Marking)	-	35000	-

08 May, 2028

-
Included w.e.f 03.06.2025

130

IS 17633 (2022)

Tables and Desks - Specification

ALL

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CLAUSE 4(Design and workmanship)	-	30000	-
ClAUSE 5(Dimensions)	-	30000	-
CLAUSE 6(SURFACE PERFORMANCE REQUIRMENTS)	-	30000	-
CLAUSE 7.2.1(Stability Under Vertical Load)	-	30000	-
CLAUSE 7.2.1.1(Test for tables that can be set to a height of 950 mm or less)	-	30000	-
CLAUSE 7.2.1.2(" Test for Tables that can be set to a height greater than 950 mm")	-	30000	-
CLAUSE 7.2.2(Stability with Extension Elements Open Place the table on the floor surface)	-	30000	-
CLAUSE 7.2.3(Stability Under Horizontal Load)	-	30000	-
CLAUSE 7.2.3.1(Test for tables that can be set to a height of 950 mm or less)	-	30000	-
CLAUSE 7.2.3.2(" Test for Tables that can be set to a height greater than 950 mm")	-	30000	-
CLAUSE 7.3.1(Strength under Vertical Static Force)	-	30000	-
CLAUSE 7.3.1.1(Stated load)	-	30000	-
CLAUSE 7.3.1.2(For occasional heavy loads)	-	30000	-
CLAUSE 7.3.2(Strength under horizontal static force)	-	30000	-
CLAUSE 7.4.1(Durability under Vertical Force)	-	30000	-
CLAUSE 7.4.2(Durability of the Height Adjustment Mechanism)	-	30000	-
CLAUSE 7.5.1(Durability and Stiffness Under Horizontal Force)	-	30000	-
CLAUSE 7.5.2(Durability under Horizontal Force)	-	30000	-
CLAUSE 7.5.3(Stiffness of the Structure Under Horizontal Force)	-	30000	-
CLAUSE 7.6.1(Vertical Impact Test)	-	30000	-
CLAUSE 7.6.2(Vertical Impact Test for Glass Table Tops)	-	30000	-
CLAUSE 7.6.3(Vertical Impact Test for All Other Table Tops)	-	30000	-
CLAUSE 7.7(Deflection of Table Tops)	-	30000	-
CLAUSE 7.8(Durability of Tables with Castors)	-	30000	-
CLAUSE 7.9(Drop Test)	-	30000	-
Cl - 5(Dimensions)	-	30000	-
Cl-6 (a)(Resistance to mechanical damage)	-	30000	-
Cl-6 (b)(Pencil hardness)	-	30000	-
Cl-6 (c)(Resistance to wet heat)	-	30000	-
Cl-6 (d)(Resistance to dry heat)	-	30000	-
Cl-6 (e)(Resistance to marking by cold liquids)	-	30000	-
Cl-6 (f)(Resistance to marking by cold oils and fats)	-	30000	-
Cl-6 (g)(Adhesive performance)	-	30000	-
Cl-7.2.1(Stability Under Vertical Load)	-	30000	-
Cl-7.2.2(Stability with Extension Elements Open)	-	30000	-
Cl-7.2.3(Stability Under Horizontal Load)	-	30000	-
Cl-7.3.1(Strength under Vertical Static Force)	-	30000	-
Cl-7.3.2(Strength under horizontal static force)	-	30000	-
Cl-7.4.1(Durability under Vertical Force)	-	30000	-
Cl-7.4.2(Durability of the Height Adjustment Mechanism)	-	30000	-
Cl-7.5.1(General)	-	30000	-
Cl-7.5.2(Durability under Horizontal Force)	-	30000	-
Cl-7.5.3(Stiffness of the Structure Under Horizontal Force)	-	30000	-
Cl-7.6.1(General)	-	30000	-
Cl-7.6.2(Vertical Impact Test for Glass Table Tops)	-	30000	-
Cl-7.6.3(Vertical Impact Test for All Other Table Tops)	-	30000	-
Cl-7.7(Deflection of Table Tops)	-	30000	-
Cl-7.8(Durability of Tables with Castors)	-	30000	-
Cl-7.9(Drop Test)	-	30000	-
Cl-9(Marking)	-	30000	-
7.1(General test conditions)	-	30000	-

08 May, 2028

-
Included w.e.f 02.06.2025

131

IS 17632 (2022)

General Purpose Chairs and Stools - Specification

ALL

62000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CLAUSE 5(DIMENSIONS)	-	62000	-
CLAUSE 6(SURFACE PERFORMANCE)	-	62000	-
CLAUSE 6.2(Fabric and Leather (Synthetic and Natural) Performance)	-	62000	-
CLAUSE 7.2.1(Forwards Overbalancing and Sideways Overbalancing for Chairs without Arms)	-	62000	-
CLAUSE 7.2.2(Rearwards Overbalancing)	-	62000	-
CLAUSE 7.2.3(Sideways Overbalancing for Chairs with Arms)	-	62000	-
CLAUSE 7.2.4(Sideways Overbalancing for Chairs with Arms)	-	62000	-
CLAUSE 7.3.1.1(Seat static load test)	-	62000	-
CLAUSE 7.3.1.2(Back static load test)	-	62000	-
CLAUSE 7.3.1.3(Armrests/Wings sideways static load test)	-	62000	-
CLAUSE 7.3.1.4(Arm downwards static load test)	-	62000	-
CLAUSE 7.3.1.5(Leg forward static load test)	-	62000	-
CLAUSE 7.3.1.6(Leg sideways static load test)	-	62000	-
CLAUSE 7.3.1.7(Diagonal base load test)	-	62000	-
CLAUSE 7.3.1.8(Foot rest static-load test)	-	62000	-
CLAUSE 7.3.2.1(Seat impact test)	-	62000	-
CLAUSE 7.3.2.2(Back impact test)	-	62000	-
CLAUSE 7.3.2.3(Arm impact test)	-	62000	-
CLAUSE 7.3.2.4(Drop test)	-	62000	-
CLAUSE 7.4.1(Seat Fatigue Test)	-	62000	-
CLAUSE 7.4.2(Back Fatigue Test)	-	62000	-
CLAUSE 7.4.3(Arm Rest Durability Test)	-	62000	-
Cl - 5(DIMENSIONS)	-	62000	-
Cl-6.1 (a)(Resistance to mechanical damage)	-	62000	-
Cl-6.1 (b)(Pencil hardness)	-	62000	-
Cl-6.1 (c)(Resistance to wet heat)	-	62000	-
Cl-6.1 (d)(Resistance to dry heat)	-	62000	-
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	62000	-
Cl-6.1 (f)(Resistance to marking by cold oils and fats)	-	62000	-
Cl-6.1 (g)(Adhesive performance)	-	62000	-
Cl-6.2 (a) 1(Breaking load)	-	62000	-
Cl-6.2 (a) 2(Elongation at break)	-	62000	-
Cl-6.2 (a) 3(Tear strength)	-	62000	-
Cl-6.2 (a) 4(Colour fastness to light)	-	62000	-
Cl-6.2 (a) 5(Colour fastness to rubbing)	-	62000	-
Cl-6.2 (a) 6(Colour fastness to perspiration)	-	62000	-
Cl-6.2 (a) 7(Colour fastness to water)	-	62000	-
Cl-6.2 (a) 8(Pilling resistance)	-	62000	-
Cl-6.2 (a) 9(Coating adhesion strength)	-	62000	-
Cl-6.2 (a) 10(Seam slippage)	-	62000	-
Cl-6.2 (a) 11(Resistance to damage by flexing)	-	62000	-
Cl-6.2 (a) 12(Abrasion resistance)	-	62000	-
Cl-6.2 (a) 13(Bursting strength)	-	62000	-
Cl-6.2 (a) 14(Resistance to cold)	-	62000	-
Cl-6.2 (b) 1(Tear strength)	-	62000	-
Cl-6.2 (b) 2(Flexing endurance)	-	62000	-
Cl-6.2 (b) 3(Finish adhesion)	-	62000	-
Cl-6.2 (b) 4(Colour fastness to artificial light)	-	62000	-
Cl-6.2 (b) 5(Colour fastness to rubbing)	-	62000	-
Cl-6.2 (b) 6(Colour fastness to water spotting)	-	62000	-
Cl-6.2 (b) 7(Water vapour permeability)	-	62000	-
Cl-6.2 (b) 8(Colour fastness to water)	-	62000	-
Cl-7.2.1(Forwards Overbalancing and Sideways Overbalancing for Chairs without Arms)	-	62000	-
Cl-7.2.2(Rearwards Overbalancing)	-	62000	-
Cl-7.2.3(Sideways Overbalancing for Chairs with Arms)	-	62000	-
Cl-7.2.4(Stools/ Poufs (All Directions))	-	62000	-
Cl-7.3.1(Static Load Test)	-	62000	-
Cl-7.3.2(Impact Test)	-	62000	-
Cl-7.4.1(Seat Fatigue Test)	-	62000	-
Cl-7.4.2(Back Fatigue Test)	-	62000	-
Cl-7.4.3(Arm Rest Durability)	-	62000	-
Cl-9(Marking)	-	62000	-
7.1(General test conditions)	-	62000	-

08 May, 2028

-
Included w.e.f 02.06.2025

132

IS 17631 (2022)

Work Chairs - Specification

ALL

80000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
clause 4(DESIGN AND WORKMANSHIP)	-	80000	-
clause 5(DIMENSIONS)	-	80000	-
Cl-6.1 (a)(Resistance to mechanical damage)	-	80000	-
Cl-6.2 (a) (1)(For Fabric and Synthetic Leather:- Breaking load)	-	80000	-
Cl-7.3.1(Front Edge Overturning)	-	80000	-
Cl-7.3.2(Forwards Overturning)	-	80000	-
Cl-7.3.3(Forwards Overturning for Chairs with Foot Rest)	-	80000	-
Cl-7.3.4(Sideways Overturning for Chairs Without Arm Rests)	-	80000	-
Cl-6.1 (b)(Pencil hardness)	-	80000	-
Cl-6.1 (c)(Resistance to wet heat;)	-	80000	-
Cl-6.1 (d)(Resistance to dry heat;)	-	80000	-
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	80000	-
Cl-6.1 (f)(Resistance to marking by cold oils and fats;)	-	80000	-
Cl-6.1 (g)(Adhesive performance)	-	80000	-
Cl-6.2 (a) (2)(For Fabric and Synthetic Leather:- Elongation at break)	-	80000	-
Cl-6.2 (a) (3)(For Fabric and Synthetic Leather:- Tear strength)	-	80000	-
Cl-6.2 (a) (4)(For Fabric and Synthetic Leather:- Colour fastness to light)	-	80000	-
Cl-6.2 (a) (5)(For Fabric and Synthetic Leather:- Colour fastness to rubbing)	-	80000	-
Cl-6.2 (a) (6)(For Fabric and Synthetic Leather:- Colour fastness to perspiration)	-	80000	-
Cl-6.2 (a) (7)(For Fabric and Synthetic Leather:- Colour fastness to water)	-	80000	-
Cl-6.2 (a) (8)(For Fabric and Synthetic Leather:- Pilling resistance)	-	80000	-
Cl-6.2 (a) (9)(For Fabric and Synthetic Leather:- Coating adhesion strength)	-	80000	-
Cl-6.2 (a) (10)(For Fabric and Synthetic Leather:- Seam slippage)	-	80000	-
Cl-6.2 (a) (11)(For Fabric and Synthetic Leather:- Resistance to damage by flexing)	-	80000	-
Cl-6.2 (a) (12)(For Fabric and Synthetic Leather:- Abrasion resistance)	-	80000	-
Cl-6.2 (a) (14)(For Fabric and Synthetic Leather:- Resistance to cold)	-	80000	-
Cl-6.2 (b) (2)(For Natural Leather:- Flexing endurance)	-	80000	-
Cl-6.2 (b) (1)(For Natural Leather:- Tear strength)	-	80000	-
Cl-6.2 (b) (3)(For Natural Leather: Finish adhesion)	-	80000	-
Cl-6.2 (b) (4)(For Natural Leather: Colour fastness to artificial light)	-	80000	-
Cl-6.2 (b) (5)(For Natural Leather: Colour fastness to rubbing)	-	80000	-
Cl-6.2 (b) (6)(For Natural Leather: Colour fastness to water spotting)	-	80000	-
Cl-6.2 (b) (7)(For Natural Leather: Water vapour permeability)	-	80000	-
Cl-6.2 (b) (8)(For Natural Leather: Colour fastness to water)	-	80000	-
Cl-7.3.5(Sideways Overturning for Chairs With Arm Rests)	-	80000	-
Cl-7.3.6(Rearwards Overturning for Chairs Without Back Rest Inclination)	-	80000	-
Cl-7.3.7(Rearwards Overturning for Chairs with Backrest Inclination)	-	80000	-
Cl-7.4.1(Seat Front Edge Static Load Test)	-	80000	-
Cl-7.4.2(Combined Seat and Back Static Load Test)	-	80000	-
Cl-7.4.3(Arm Rest Downward Static Load Test — Central)	-	80000	-
Cl-7.4.4(Arm Rest Downward Static Load Test — Front)	-	80000	-
Cl-7.4.5(Arm Rest Sideways Static Load Test)	-	80000	-
Cl-7.4.6(Foot Rest Static Load Test)	-	80000	-
Cl-7.5.1(Seat and Back Durability)	-	80000	-
Cl-7.5.2(Arm Rest Durability)	-	80000	-
Cl-7.5.3(Swivel Test)	-	80000	-
Cl-7.5.4(Foot-rest Durability)	-	80000	-
Cl-7.5.5(Castor and Chair-Base Durability)	-	80000	-
Cl-6.2 (a) (13)(For Fabric and Synthetic Leather:- Bursting strength)	-	80000	-

08 May, 2028

-
Included w.e.f 03.06.2025

133

IS 17043 : Part 2 (2024)

Shoes: Shoes for General Purpose

ALL

50500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Shape and Design)	-	50500	-
Cl-5.3(Material)	-	50500	-
Cl-5.4, Table-1 (i)(Bond strength, N/mm, Min Upper to outsole, N/mm, Min)	-	50500	-
Cl-5.4, Table-1 (ii)(Inter layer bond strength,= N/mm, Min Midsole to outsole, N/mm, Min)	-	50500	-
Cl-5.4, Table-1 (iii)(Whole shoe flexing, flexes)	-	50500	-
Cl-5.4, Table-1 (iv)(Water proofness on complete shoe)	-	50500	-
Cl-5.4, Table-1 (v)(Slip resistance, Cof(1), Min dry and wet* (quarry tile))	-	50500	-
Cl-5.4, Table-1 (vi)(Attachment strength of strap and buckle/D-ring N)	-	50500	-
Cl-5.4, Table-1 (vii)(Attachment strength of strap and velcro , N, Min)	-	50500	-
Cl-5.4, Table-1 (viii)(Strength of eyelet attachment, N, Min)	-	50500	-
Cl-5.4, Table-1 (ix)(Heel pull off strength, N, Min)	-	50500	-
Cl-5.4, Table-1 (x)(Top piece attachment strength, N, Min)	-	50500	-
Cl-5.4, Table-1 (xi)(Seam strength, N/mm, Min)	-	50500	-
Cl-5.4, Table-1 (xii)(Whole shoe topline strength, N, Min)	-	50500	-
Cl-5.4, Table-1 (xiii)(Abrasion resistance (volume loss), mm3)	-	50500	-
Cl-5.4, Table-1 (xiv)(Chemical requirements(3))	-	50500	-
Cl-5.4, Table-1 (xv)(Lead content (as Pb) ppm, Max)	-	50500	-
Cl-5.4, Table-1 (xvi)(Hydrolysis resistance,(4) cut growth at 150 000 flexes, mm, Max)	-	50500	-
Cl-6.1.1, Table-2 (i)(Tear trength, N)	-	50500	-
Cl-6.1.1, Table-2 (ii)(Flexing resistance, flexes)	-	50500	-
Cl-6.1.1, Table-2 (iii)(Colour fastness to rubbing (marring/staining))	-	50500	-
Cl-6.1.1, Table-2 (iv)(Colour fastness to water (contact method- multi fabrics))	-	50500	-
Cl-6.1.1, Table-2 (v)(Water vapour permeability,mg/cm2 /h, Min Water vapour coefficient,mg/cm2 , Min)	-	50500	-
Cl-6.1.1, Table-2 (vi)(Stitch tear strength, N/mm, Min)	-	50500	-
Cl-6.1.1, Table-2 (vii)(Abrasion resistance)	-	50500	-
Cl-6.1.2, Table-3 (i)(Colour fastness to light, Marring, Min)	-	50500	-
Cl-6.1.2, Table-3 (ii)(Water resistance)	-	50500	-
Cl-6.1.2, Table-3 (iii)(Flexing resistance, flexes at (-) 5 °C 25 000 flexes)	-	50500	-
Cl-6.1.3, Table- 4 (i)(Breaking strength, N/mm, Min Elongation at break, percent, Min)	-	50500	-
Cl-6.1.3, Table- 4 (ii)(Tear Strength, N, Min)	-	50500	-
Cl-6.1.3, Table- 4 (iii)(Strength at needle perforation, N/mm, Min)	-	50500	-
Cl-6.1.3, Table- 4 (iv)(Flexing resistance, Flexes)	-	50500	-
Cl-6.1.3, Table- 4 (v)(Water vapour permeability (WVP), mg/cm2 /h, Min)	-	50500	-
Cl-6.1.3, Table- 4 (vi)(Hydrolysis resistance)	-	50500	-
Cl-6.1.3, Table- 4 (vii)(Abrasion resistance)	-	50500	-
Cl-6.1.4, Table-5 (i)(Colour fastness to light, Marring, Min)	-	50500	-
Cl-6.1.4, Table- 5 (ii)(Flexing resistance, flexes at (-) 5 ºC, s 25 000 flexes)	-	50500	-
Cl-6.2, Table-6 (i)(Tear strength, N, Min)	-	50500	-
Cl-6.2, Table-6 (ii)(Abrasion resistance)	-	50500	-
Cl-6.2, Table-6 (iii)(Colour fastness rubbing (crocking))	-	50500	-
Cl-6.2, Table-6 (iv)(Colour fastness to perspiration)	-	50500	-
Cl-6.2, Table-6 (v)(Water vapour permeability, mg/cm2 /h, Min Water vapour coefficient, mg/cm2, Min)	-	50500	-
Cl-6.3, Table-7 (i)(Flexing index, Min)	-	50500	-
Cl-6.3, Table-7 (ii)(Abrasion resistance at 400 cycles)	-	50500	-
Cl-6.3, Table-7 (iii)(Water absorption, mg/cm2 , Min Water desorption, percent, Min)	-	50500	-
Cl-6.4, Table-8 (i)(Thickness, mm, Min)	-	50500	-
Cl-6.4, Table-8 (ii)(Abrasion resistance)	-	50500	-
Cl-6.4, Table-8 (iii)(Water absorption, mg/cm2 , Min Water desorption, percent, Min)	-	50500	-
Cl-6.5.1, , Table-9 (i)(Flexing resistance)	-	50500	-
Cl-6.5.1, , Table-9 (ii)(Hydrolysis resistance, cut growth at 150 000 flexes, mm, Max)	-	50500	-
Cl-6.5.1, , Table-9 (iii)(Compression set, percent, Max)	-	50500	-
Cl-6.5.2.1, Table-10 (i)(Grain crack index, Min)	-	50500	-
Cl-6.5.2.1, Table-10 (ii)(Density, g/cm3 , Min)	-	50500	-
Cl-6.5.2.1, Table-10 (iii)(Abrasion resistance, mm/kcs, Max)	-	50500	-
Cl-6.5.2.2, Table-11 (i)(Water resistance, (dynamic method))	-	50500	-
Cl-6.5.2.3, Table-12 (i)(Hardness, Min)	-	50500	-
Cl-6.5.2.3, Table-12 (ii)(Density, g/cm3 , Max)	-	50500	-
Cl-6.5.2.3, Table-12 (iii)(Abrasion resistance (volume loss), mm3 , Max)	-	50500	-
Cl-6.5.2.3, Table-12 (iv)(Bond Strength between Rubber top-lift and adjacent material, N/mm, Min)	-	50500	-
Cl-6.6, Table-13 (i)(Heat shrinkage, percent, Max)	-	50500	-
Cl-6.6, Table-13 (ii)(Split tear strength, kg/25 mm, Min)	-	50500	-
Cl-6.6, Table-13 (iii)(Compression set, percent, Max)	-	50500	-
Cl-6.7, Table-14 (i)(Hardness, N)	-	50500	-
Cl-6.7, Table-14 (ii)(Resilience, percent)	-	50500	-
Cl-6.7, Table-14 (iii)(Moisture resistance, percent)	-	50500	-
Cl-6.10, Table-17 (i)(Lace breaking strength, N, Min)	-	50500	-
Cl-6.10, Table-17 (ii)(Lace tag strength, N, Min)	-	50500	-
Cl-6.10, Table-17 (iii)(Lace to lace abrasion resistance, cycles)	-	50500	-
Cl-6.10, Table-17 (iv)(Colour fastness to water for lace contact methodstaining Gray scale rate , Min)	-	50500	-
Cl-6.10, Table-17 (v)(Corrosion resistance)	-	50500	-
Cl-6.11, Table-18 (i)(Fatigue resistance, cycles, Min)	-	50500	-
Cl-6.11, Table-18 (ii)(Security of puller attachment strength, N, Min)	-	50500	-
Cl-6.11, Table-18 (iii)(Lateral load, N, Min)	-	50500	-
Cl-6.11, Table-18 (iv)(End attachment strength, N, Min)	-	50500	-
Cl-8.1(Marking)	-	50500	-
Cl-6.7, Table-14 (iv)(Area shape retention, percent (a) Initial, Min b) After 10 collapsing load, Min)	-	50500	-
Cl-6.7, Table-14 (v)(Adhesion strength, N/mm)	-	50500	-
Cl-6.8, Table-15 (i)(Peel strength, N/mm a) Initial, Min b) After 5 000 wear cycles, Min)	-	50500	-
Cl- 6.8, Table-15 (ii)(a) Shear strength, kPa b) Initial, Min)	-	50500	-
Cl- 6.9, Table-16 (i)(Limit of useful extension, percent, Min)	-	50500	-
Cl- 6.9, Table-16 (ii)(Needle strength, N/mm, Min)	-	50500	-
CL. 5.4, Table 1, Sl No (xiv) & Table 1 of IS 17011(pH, Min)	-	50500	-
CL. 5.4, Table 1, Sl No (xv)("Lead content (as Pb) ppm, Max (applicable only for PVC")	-	50500	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(i)(Allergenic and carcinogenic disperse dyes)	-	50500	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	50500	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	50500	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(iv)(Chromium (VI))	-	50500	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(v)(Dimethyl fumarate (DMFU))	-	50500	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(vi)(Formaldehyde (free or released by partial hydrolysis))	-	50500	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(vii)(Formaldehyde)	-	50500	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(viii)(Organotin compounds)	-	50500	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(ix)(PCP-TeCP-TriCP polychlorophenols)	-	50500	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(x)(pH)	-	50500	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(xi)(Phthalates (each individual phthalate))	-	50500	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(xii)(Nickel, on skin contact)	-	50500	-
Cl-5.1(Shape and Design)	-	1000	-
Cl-5.3(Material)	-	1000	-
Cl-5.4, Table-1 (i)(Bond strength, N/mm, Min Upper to outsole, N/mm, Min)	-	1000	-
Cl-5.4, Table-1 (ii)(Inter layer bond strength,= N/mm, Min Midsole to outsole, N/mm, Min)	-	1000	-
Cl-5.4, Table-1 (iii)(Whole shoe flexing, flexes)	-	1000	-
Cl-5.4, Table-1 (iv)(Water proofness on complete shoe)	-	1000	-
Cl-5.4, Table-1 (v)(Slip resistance, Cof(1), Min dry and wet* (quarry tile))	-	1000	-
Cl-5.4, Table-1 (vi)(Attachment strength of strap and buckle/D-ring N)	-	1000	-
Cl-5.4, Table-1 (vii)(Attachment strength of strap and velcro , N, Min)	-	1000	-
Cl-5.4, Table-1 (viii)(Strength of eyelet attachment, N, Min)	-	1000	-
Cl-5.4, Table-1 (ix)(Heel pull off strength, N, Min)	-	1000	-
Cl-5.4, Table-1 (x)(Top piece attachment strength, N, Min)	-	1000	-
Cl-5.4, Table-1 (xi)(Seam strength, N/mm, Min)	-	1000	-
Cl-5.4, Table-1 (xii)(Whole shoe topline strength, N, Min)	-	1000	-
Cl-5.4, Table-1 (xiii)(Abrasion resistance (volume loss), mm3)	-	1000	-
Cl-5.4, Table-1 (xiv)(Chemical requirements(3))	-	1000	-
Cl-5.4, Table-1 (xv)(Lead content (as Pb) ppm, Max)	-	1000	-
Cl-5.4, Table-1 (xvi)(Hydrolysis resistance,(4) cut growth at 150 000 flexes, mm, Max)	-	1000	-
Cl-6.1.1, Table-2 (i)(Tear trength, N)	-	1000	-
Cl-6.1.1, Table-2 (ii)(Flexing resistance, flexes)	-	1000	-
Cl-6.1.1, Table-2 (iii)(Colour fastness to rubbing (marring/staining))	-	1000	-
Cl-6.1.1, Table-2 (iv)(Colour fastness to water (contact method- multi fabrics))	-	1000	-
Cl-6.1.1, Table-2 (v)(Water vapour permeability,mg/cm2 /h, Min Water vapour coefficient,mg/cm2 , Min)	-	1000	-
Cl-6.1.1, Table-2 (vi)(Stitch tear strength, N/mm, Min)	-	1000	-
Cl-6.1.1, Table-2 (vii)(Abrasion resistance)	-	1000	-
Cl-6.1.2, Table-3 (i)(Colour fastness to light, Marring, Min)	-	1000	-
Cl-6.1.2, Table-3 (ii)(Water resistance)	-	1000	-
Cl-6.1.2, Table-3 (iii)(Flexing resistance, flexes at (-) 5 °C 25 000 flexes)	-	1000	-
Cl-6.1.3, Table- 4 (i)(Breaking strength, N/mm, Min Elongation at break, percent, Min)	-	1000	-
Cl-6.1.3, Table- 4 (ii)(Tear Strength, N, Min)	-	1000	-
Cl-6.1.3, Table- 4 (iii)(Strength at needle perforation, N/mm, Min)	-	1000	-
Cl-6.1.3, Table- 4 (iv)(Flexing resistance, Flexes)	-	1000	-
Cl-6.1.3, Table- 4 (v)(Water vapour permeability (WVP), mg/cm2 /h, Min)	-	1000	-
Cl-6.1.3, Table- 4 (vi)(Hydrolysis resistance)	-	1000	-
Cl-6.1.3, Table- 4 (vii)(Abrasion resistance)	-	1000	-
Cl-6.1.4, Table-5 (i)(Colour fastness to light, Marring, Min)	-	1000	-
Cl-6.1.4, Table- 5 (ii)(Flexing resistance, flexes at (-) 5 ºC, s 25 000 flexes)	-	1000	-
Cl-6.2, Table-6 (i)(Tear strength, N, Min)	-	1000	-
Cl-6.2, Table-6 (ii)(Abrasion resistance)	-	1000	-
Cl-6.2, Table-6 (iii)(Colour fastness rubbing (crocking))	-	1000	-
Cl-6.2, Table-6 (iv)(Colour fastness to perspiration)	-	1000	-
Cl-6.2, Table-6 (v)(Water vapour permeability, mg/cm2 /h, Min Water vapour coefficient, mg/cm2, Min)	-	1000	-
Cl-6.3, Table-7 (i)(Flexing index, Min)	-	1000	-
Cl-6.3, Table-7 (ii)(Abrasion resistance at 400 cycles)	-	1000	-
Cl-6.3, Table-7 (iii)(Water absorption, mg/cm2 , Min Water desorption, percent, Min)	-	1000	-
Cl-6.4, Table-8 (i)(Thickness, mm, Min)	-	1000	-
Cl-6.4, Table-8 (ii)(Abrasion resistance)	-	1000	-
Cl-6.4, Table-8 (iii)(Water absorption, mg/cm2 , Min Water desorption, percent, Min)	-	1000	-
Cl-6.5.1, , Table-9 (i)(Flexing resistance)	-	1000	-
Cl-6.5.1, , Table-9 (ii)(Hydrolysis resistance, cut growth at 150 000 flexes, mm, Max)	-	1000	-
Cl-6.5.1, , Table-9 (iii)(Compression set, percent, Max)	-	1000	-
Cl-6.5.2.1, Table-10 (i)(Grain crack index, Min)	-	1000	-
Cl-6.5.2.1, Table-10 (ii)(Density, g/cm3 , Min)	-	1000	-
Cl-6.5.2.1, Table-10 (iii)(Abrasion resistance, mm/kcs, Max)	-	1000	-
Cl-6.5.2.2, Table-11 (i)(Water resistance, (dynamic method))	-	1000	-
Cl-6.5.2.3, Table-12 (i)(Hardness, Min)	-	1000	-
Cl-6.5.2.3, Table-12 (ii)(Density, g/cm3 , Max)	-	1000	-
Cl-6.5.2.3, Table-12 (iii)(Abrasion resistance (volume loss), mm3 , Max)	-	1000	-
Cl-6.5.2.3, Table-12 (iv)(Bond Strength between Rubber top-lift and adjacent material, N/mm, Min)	-	1000	-
Cl-6.6, Table-13 (i)(Heat shrinkage, percent, Max)	-	1000	-
Cl-6.6, Table-13 (ii)(Split tear strength, kg/25 mm, Min)	-	1000	-
Cl-6.6, Table-13 (iii)(Compression set, percent, Max)	-	1000	-
Cl-6.7, Table-14 (i)(Hardness, N)	-	1000	-
Cl-6.7, Table-14 (ii)(Resilience, percent)	-	1000	-
Cl-6.7, Table-14 (iii)(Moisture resistance, percent)	-	1000	-
Cl-6.10, Table-17 (i)(Lace breaking strength, N, Min)	-	1000	-
Cl-6.10, Table-17 (ii)(Lace tag strength, N, Min)	-	1000	-
Cl-6.10, Table-17 (iii)(Lace to lace abrasion resistance, cycles)	-	1000	-
Cl-6.10, Table-17 (iv)(Colour fastness to water for lace contact methodstaining Gray scale rate , Min)	-	1000	-
Cl-6.10, Table-17 (v)(Corrosion resistance)	-	1000	-
Cl-6.11, Table-18 (i)(Fatigue resistance, cycles, Min)	-	1000	-
Cl-6.11, Table-18 (ii)(Security of puller attachment strength, N, Min)	-	1000	-
Cl-6.11, Table-18 (iii)(Lateral load, N, Min)	-	1000	-
Cl-6.11, Table-18 (iv)(End attachment strength, N, Min)	-	1000	-
Cl-8.1(Marking)	-	1000	-
Cl-6.7, Table-14 (iv)(Area shape retention, percent (a) Initial, Min b) After 10 collapsing load, Min)	-	1000	-
Cl-6.7, Table-14 (v)(Adhesion strength, N/mm)	-	1000	-
Cl-6.8, Table-15 (i)(Peel strength, N/mm a) Initial, Min b) After 5 000 wear cycles, Min)	-	1000	-
Cl- 6.8, Table-15 (ii)(a) Shear strength, kPa b) Initial, Min)	-	1000	-
Cl- 6.9, Table-16 (i)(Limit of useful extension, percent, Min)	-	1000	-
Cl- 6.9, Table-16 (ii)(Needle strength, N/mm, Min)	-	1000	-
CL. 5.4, Table 1, Sl No (xiv) & Table 1 of IS 17011(pH, Min)	-	1000	-
CL. 5.4, Table 1, Sl No (xv)("Lead content (as Pb) ppm, Max (applicable only for PVC")	-	1000	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(i)(Allergenic and carcinogenic disperse dyes)	-	1000	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	1000	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	1000	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(iv)(Chromium (VI))	-	1000	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(v)(Dimethyl fumarate (DMFU))	-	1000	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(vii)(Formaldehyde)	-	1000	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(viii)(Organotin compounds)	-	1000	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(ix)(PCP-TeCP-TriCP polychlorophenols)	-	1000	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(x)(pH)	-	1000	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(xi)(Phthalates (each individual phthalate))	-	1000	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(xii)(Nickel, on skin contact)	-	1000	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	1000	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	1000	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	1000	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	1000	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	1000	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	1000	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	1000	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	1000	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	1000	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	1000	-
Shoes: Shoes for General Purpose(Organotin: Monobutyltin)	-	1000	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	1000	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	1000	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	1000	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	1000	-
Cl.1.4.1 of IS 17011(DMFU)	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(Chromium)	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(pH)	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	1000	-
Cl.4.1 (Table B-1 Sl I)(Aromatic Amines: 4-aminobiphenyl)	-	1000	-
Cl.4.1 (Table B-1 Sl II)(Aromatic Amines: Benzidine)	-	1000	-
Cl.4.1 (Table B-1 Sl III)(Aromatic Amines: 4-chloro-o-toluidine)	-	1000	-
Cl.4.1 (Table B-1 Sl IV)(Aromatic Amines: 2-naphthylamine)	-	1000	-
Cl.4.1 (Table B-1 Sl V)(Aromatic Amines :o- aminoazotoluene)	-	1000	-
Cl.4.1 (Table B-1 Sl VI)(Aromatic Amines: 2-amino-4-nitrotoluenem)	-	1000	-
Cl.4.1 (Table B-1 Sl VII)(Aromatic Amines: p-chloroaniline)	-	1000	-
Cl.4.1 (Table B-1 Sl VIII)(Aromatic Amines: 2,4-diaminoanisole)	-	1000	-
Cl.4.1 (Table B-1 Sl X)(Aromatic Amines : 3,3’-dichlorobenzidine)	-	1000	-
Cl.4.1 (Table B-1 Sl XI)(Aromatic Amines : 3,3’-dimethoxybenzidine)	-	1000	-
Cl.4.1 (Table B-1 Sl XII)(Aromatic Amines : 3,3’-dimethylbenzidine)	-	1000	-
Cl.4.1 (Table B-1 Sl XIII)(Aromatic Amines: 3,3’-dimethyl-4,4’-diaminodiphenylmethane)	-	1000	-
Cl.4.1 (Table B-1 Sl XIV)(Aromatic Amines : p-cresi)	-	1000	-
Cl.4.1 (Table B-1 Sl XV)(Aromatic Amines : 4,4’-methylene-bis(2-chloroaniline):)	-	1000	-
Cl.4.1 (Table B-1 Sl XVI)(Aromatic Amines :4,4’-oxydianiline)	-	1000	-
Cl.4.1 (Table B-1 Sl XVII)(Aromatic Amines:4,4’-thiodianiline)	-	1000	-
Cl.4.1 (Table B-1 Sl XVIII)(Aromatic Amines :o-toluidine:)	-	1000	-
Cl.4.1 (Table B-1 Sl XIX)(Aromatic Amines: 2,4-toluylendiamine)	-	1000	-
Cl.4.1 (Table B-1 Sl XX)(Aromatic Amines: 2,4,5-trimethylaniline)	-	1000	-
Cl.4.1 (Table B-1 Sl XXI)(Aromatic Amines :2,4-dimethylaniline)	-	1000	-
Cl.4.1 (Table B-1 Sl XXII)(Aromatic Amines: 2,6-dimethylaniline:)	-	1000	-
Cl.4.1 (Table B-1 Sl XXIII)(Aromatic Amines :2-methoxyaniline)	-	1000	-
Cl.4.1 (Table B-1 Sl XXIV)(Aromatic Amines :4-aminoazobenzene)	-	1000	-
Cl.4.1 (Table B-3 Sl I)(Allergenic Disperse Dyes :Disperse blue 3)	-	1000	-
Cl.4.1 (Table B-3 Sl II)(Allergenic Disperse Dyes :Disperse blue 7)	-	1000	-
Cl.4.1 (Table B-3 Sl III)(Allergenic Disperse Dyes :Disperse blue 26)	-	1000	-
Cl.4.1 (Table B-3 Sl IV)(Allergenic Disperse Dyes :Disperse blue 102)	-	1000	-
Cl.4.1 (Table B-3 Sl V)(Allergenic Disperse Dyes: Disperse brown 1)	-	1000	-
Cl.4.1 (Table B-3 Sl VI)(Allergenic Disperse Dyes :Disperse yellow 1)	-	1000	-
Cl.4.1 (Table B-3 Sl VII)(Allergenic Disperse Dyes :Disperse yellow 9)	-	1000	-
Cl.4.1 (Table B-3 Sl VIII)(Allergenic Disperse Dyes :Disperse yellow 39)	-	1000	-
Cl.4.1 (Table B-3 Sl IX)(Allergenic Disperse Dyes :Disperse yellow 49)	-	1000	-
Cl.4.1 (Table B-3 Sl X)(Allergenic Disperse Dyes :Disperse orange 1)	-	1000	-
Cl.4.1 (Table B-3 Sl XI)(Allergenic Disperse Dyes :Disperse red 11)	-	1000	-
Cl.4.1 (Table B-3 Sl XII)(Allergenic Disperse Dyes :Disperse red 17)	-	1000	-
Cl.4.1 (Table B-3 Sl XIII)(Allergenic Disperse Dyes :Disperse yellow 7)	-	1000	-
Cl.4.1 (Table B-3 Sl XIV)(Allergenic Disperse Dyes :Disperse yellow 56)	-	1000	-
Cl.4.1 (Table B-3 Sl XV)(Allergenic Disperse Dyes :Disperse red 151)	-	1000	-
Cl.4.1 (Table B-3 Sl XVI)(Allergenic Disperse Dyes :Solvent red 23)	-	1000	-
Cl.4.1 (Table B-4 Sl I)(Carcinogenic Disperse Dyes :Navy blue)	-	1000	-
Cl.4.1 (Table B-4 Sl II)(Carcinogenic Disperse Dyes: Disperse blue 1)	-	1000	-
Cl.4.1 (Table B-4 Sl III)(Carcinogenic Disperse Dyes: Disperse blue 35)	-	1000	-
Cl.4.1 (Table B-4 Sl IV)(Carcinogenic Disperse Dyes :Disperse blue 106)	-	1000	-
Cl.4.1 (Table B-4 Sl V)(Carcinogenic Disperse Dyes: Disperse blue 124)	-	1000	-
Cl.4.1 (Table B-4 Sl VI)(Carcinogenic Disperse Dyes :Disperse yellow 3)	-	1000	-
Cl.4.1 (Table B-4 Sl VII)(Carcinogenic Disperse Dyes: Disperse orange 3)	-	1000	-
Cl.4.1 (Table B-4 Sl VIII)(Carcinogenic Disperse Dyes :Disperse orange 37/59/76a))	-	1000	-
Cl.4.1 (Table B-4 Sl IX)(Carcinogenic Disperse Dyes :Disperse red 1)	-	1000	-
Cl.4.1 (Table B-4 Sl X)(Carcinogenic Disperse Dyes :Basic red 9)	-	1000	-
Cl.4.1 (Table B-4 Sl XI)(Carcinogenic Disperse Dyes :Violet 3)	-	1000	-
Cl.4.1 (Table B-4 Sl XII)(Carcinogenic Disperse Dyes Disperse yellow 23)	-	1000	-

08 May, 2028

-
Included w.e.f 04.08.2025

134

IS 15844 : Part 2 (2023)

SPORTS FOOTWEAR PART -2 PERFORMANCE SPORTS FOOTWEAR

All

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(SAMPLING AND CONDITIONING)	-	60000	-
5(DESIGN)	-	60000	-
6(SIZE AND FITTINGS)	-	60000	-
7.1.1(Whole Footwear)	-	60000	-
7.1.2(Upper to Mid Sole/Out Sole Bond Performance)	-	60000	-
7.1.3("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	60000	-
7.1.4(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	60000	-
7.1.5(Energy Absorption at Seat Region)	-	60000	-
7.1.6(Complete Shoe Flexing)	-	60000	-
7.1.7(Washability)	-	60000	-
7.1.8(Slip Resistance)	-	60000	-
7.1.9(Heel Drop)	-	60000	-
7.2 , Table No. 2 , i)(Flexing resistance)	-	60000	-
7.2 , Table No. 2 , ii)(Tear strength (average force))	-	60000	-
7.2 , Table No. 2 , iii)("Colour fastness rubbing (To and fro) Grey scale rate Dry: (rubbing) Rating: (Marring and staining) ")	-	60000	-
7.2 , Table No. 2 , iv) ,a)(Water vapour permeability)	-	60000	-
7.2 , Table No. 2 , iv) ,b)(Water vapour coefficient)	-	60000	-
7.2 , Table No. 2 , v)(Stitch tear strength (double hole))	-	60000	-
7.2 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Rating: (Marring)")	-	60000	-
7.2 , Table No. 2 , vii)(Tensile strength)	-	60000	-
7.2 , Table No. 2 , viii)(Elongation at break,)	-	60000	-
7.2 , Table No. 2 , ix)("Water penetration and water absorption after 60 Minutes Water absorption %, Max Water penetration Gms, Max")	-	60000	-
7.2 , Table No. 2 , x)(Abrasion test (for unlined upper))	-	60000	-
7.2 , Table No. 3 , i)(Breaking strength "As per Method 1 of IS 7016 (Part 2)/ ISO 1421 : 2016 or ISO 17706")	-	60000	-
7.2 , Table No. 3 , ii)(Elongation at break)	-	60000	-
7.2 , Table No. 3 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	60000	-
7.2 , Table No. 3 , iv)(Strength at needle perforation)	-	60000	-
7.2 , Table No. 3 , v)("Flexing resistance, no crack/damage to coating/ lamination / upper material till prescribed cycles")	-	60000	-
7.2 , Table No. 3 , vi) , a)(Water vapour permeability,)	-	60000	-
7.2 , Table No. 3 , vi) , b)("Water vapour coefficient, ")	-	60000	-
7.2 , Table No. 3 , vii)(Hydrolysis resistance)	-	60000	-
7.2 , Table No. 3 , viii)(Colour fastness to light grey scale rate)	-	60000	-
7.2 , Table No. 3 , ix)(Bursting Strength,)	-	60000	-
7.3 , Table No. 4 , i)(Tear strength,)	-	60000	-
7.3 , Table No. 4 , ii)(Abrasion resistance, cycles)	-	60000	-
7.3 , Table No. 4 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, ")	-	60000	-
7.3 , Table No. 4 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, ")	-	60000	-
7.3 , Table No. 4 , v) , a)(Water vapour permeability,)	-	60000	-
7.3 , Table No. 4 , v) , b)("Water vapour coefficient, " As per IS 15298 (Part 1))	-	60000	-
7.4 , Table No. 5 , i)(Thickness)	-	60000	-
7.4 , Table No. 5 , ii)(Flexing index)	-	60000	-
7.4 , Table No. 5 , iii)(Abrasion resistance, at 400 cycles)	-	60000	-
7.4 , Table No. 5 , iv) , a)(Water Absorption,)	-	60000	-
7.4 , Table No. 5 , iv) , b)(Water Desorption)	-	60000	-
7.5 , Table No. 6 , i)(Thickness)	-	60000	-
7.5 , Table No. 6 , ii)(Abrasion resistance, cycles As per IS 15298 (Part 1))	-	60000	-
7.5 , Table No. 6 , iii) , a)(Water Absorption)	-	60000	-
7.5 , Table No. 6 , iii) , b)(Water Desorption)	-	60000	-
7.5 , Table No. 6 , iv)(Heat resistance shrinkage linear)	-	60000	-
7.6 , Table No. 7 , i)(Abrasion resistance (volume loss))	-	60000	-
7.6 , Table No. 7 , ii)(Flexing resistance)	-	60000	-
7.6 , Table No. 7 , iii)(Hydrolysis resistance, cut growth after 1 50 000 flexes)	-	60000	-
7.6 , Table No. 7 , iv)(Tear strength)	-	60000	-
7.6 , Table No. 7 , v)(Tensile strength)	-	60000	-
7.6 , Table No. 7 , vi)(Elongation at break)	-	60000	-
7.6 , Table No. 7 , vii)(Compression set)	-	60000	-
7.7 , Table No. 8 , i)(Compression set)	-	60000	-
7.7 , Table No. 8 , ii)(Split tear strength,)	-	60000	-
7.7 , Table No. 8 , iii)(Heat shrinkage,)	-	60000	-
7.7 , Table No. 8 , iv)(Elongation at break,)	-	60000	-
7.8 , Table No. 9 , i)(First dry collapsing load, hardness)	-	60000	-
7.8 , Table No. 9 , ii)(Resilience)	-	60000	-
7.8 , Table No. 9 , iii)(Moisture resistance)	-	60000	-
7.8 , Table No. 9 , iv) , a)(Initial dry area shape retention)	-	60000	-
7.8 , Table No. 9 , iv) , b)(Area shape retention after 10th collapse, dry)	-	60000	-
7.8 , Table No. 9 , v)(Peel strength)	-	60000	-
7.9 , Table No. 10 , i)(Peel strength)	-	60000	-
7.9 , Table No. 10 , ii)(Shear strength)	-	60000	-
7.10 , Table No. 11 , i)(Limit of useful extension,)	-	60000	-
7.10 , Table No. 11 , ii)(Needle strength,)	-	60000	-
7.11 , Table No. 12 , i)(Breaking strength of lace,)	-	60000	-
7.11 , Table No. 12 , ii)(Lace tag strength,)	-	60000	-
7.11 , Table No. 12 , iii)(Lace to lace abrasion,)	-	60000	-
7.11 , Table No. 12 , iv)("Colour fastness to water Gray Scale Rate")	-	60000	-
7.11 , Table No. 12 , v)(Strength of Buckle/Ski hook)	-	60000	-
7.11 , Table No. 12 , vi)(Corrosion resistance)	-	60000	-
7.12("Chemical Requirement on Complete Product for All Types of Sports Shoe")	-	60000	-
8(MARKING AND PACKING)	-	60000	-
7.12, Table no. 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	60000	-
7.12, Table no. 1 of IS 17011,(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	60000	-
7.12, Table no. 1 of IS 17011,(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	60000	-
7.12, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	60000	-
7.12, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	60000	-
7.12, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	60000	-
7.12, Table no. 1 of IS 17011,(vii)(Formaldehyde)	-	60000	-
7.12, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	60000	-
7.12, Table no. 1 of IS 17011,(ix)(PCP-TeCP-TriCP polychlorophenols)	-	60000	-
7.12, Table no. 1 of IS 17011,(x)(pH)	-	60000	-
7.12, Table no. 1 of IS 17011,(xi)(Phthalates (each individual phthalate))	-	60000	-
7.12, Table no. 1 of IS 17011,(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	60000	-
7.12.2 (Amendment 1)(Lead content)	-	60000	-

08 May, 2028

-
Included w.e.f 04.08.2025

135

IS 16240 (2023)

REVERSE OSMOSIS RO BASED POINT-OF-USE POU WATER TREATMENT SYSTEM FOR DRINKING PURPOSES SPECIFICATION first revision

all

145000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Overall migration limits)	-	65000	-
Cl-6.3.1(TDS Reduction)	-	65000	-
Cl-6.3.2.1, 6.3.3.1 and B-1.2,Table 1, sl.no-i(Arsenic)	-	65000	-
Cl-6.3.2.1, 6.3.3.1 and B-1.2,Table 1, sl.no-ii(Cadmium)	-	65000	-
Cl-6.3.2.1, 6.3.3.1 and B-1.2,Table 1, sl.no-iii(Chromium)	-	65000	-
Cl-6.3.2.1, 6.3.3.1 and B-1.2,Table 1, sl.no-iv(Copper)	-	65000	-
Cl-6.3.2.1, 6.3.3.1 and B-1.2,Table 1, sl.no-v(Fluoride)	-	65000	-
Cl-6.3.2.1, 6.3.3.1 and B-1.2,Table 1, sl.no-vi(Lead)	-	65000	-
Cl-6.3.2.1, 6.3.3.1 and B-1.2,Table 1, sl.no-vii(Mercury)	-	65000	-
Cl-6.3.2.1, 6.3.3.1 and B-1.2,Table 1, sl.no-viii(Nitrate)	-	65000	-
Cl-6.3.2.1, 6.3.3.1 and B-1.2,Table 1, sl.no-ix(Pesticides total)	-	65000	-
Cl-6.3.2.1, 6.3.3.1 and B-1.2,Table 1, sl.no-x(E. coli)	-	65000	-
Cl-6.3.2.1, 6.3.3.1 and B-1.2,Table 1, sl.no-xi(MS-2 Coliphage (Virus))	-	65000	-
Cl-6.3.3.2.1,Table 2,sl.no-i(Cryptosporidium parvum)	-	40000	-
Cl-6.3.3.2.1,Table 2,sl.no-ii(Giardia lamblia)	-	40000	-
Cl-6.4(Percent Recovery of Product Water and Hourly Production Rate)	-	65000	-
Cl-6.5.1(Excessive Leakage Current)	-	65000	-
Cl-6.5.2(High Voltage Test)	-	65000	-
Cl-6.5.3(Provision For Earthing)	-	65000	-
Cl-6.6(Power supply)	-	65000	-
Cl-6.7(Pressure Test (Hydrostatic Test) — Type Test)	-	65000	-
Cl-6.8.1(Routine Pressure Test (Pneumatic Test))	-	65000	-
Cl-6.8.2(Full Device Leakage Testing)	-	65000	-

08 May, 2028

-
Included w.e.f 17.06.2025

136

IS 6721 (2023)

SANDAL AND SLIPPERS SPECIFICATION First revision

all

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No.4(SHAPE AND DESIGN)	-	45000	-
Cl. No.5("SIZE AND FITTINGS ")	-	45000	-
Cl. No.6("CONSTRUCTION ")	-	45000	-
Cl. No.7(MATERIAL)	-	45000	-
Cl. No.8.1, Table no. 1(i),a("Tear strength, (other than moulded upper material) ")	-	45000	-
Cl. No.8.1, Table no. 1(i),b("For all moulded upper material ")	-	45000	-
Cl. No.8.1, Table no. 1(ii)(Flexing endurance)	-	45000	-
Cl. No.8.2,Table no. 2(i)(Tear strength)	-	45000	-
Cl. No.8.2,Table no. 2(ii),a("Abrasion resistance- At dry condition")	-	45000	-
Cl. No.8.2,Table no. 2(ii),b("Abrasion resistance- At wet condition")	-	45000	-
Cl. No.8.3,Table no. 3(i)(Tear strength)	-	45000	-
Cl. No.8.3,Table no. 3(ii),a("Abrasion resistance- At dry condition")	-	45000	-
Cl. No.8.3,Table no. 3(ii),b("Abrasion resistance- At wet condition")	-	45000	-
Cl. No.8.4,Table no. 4(i)(Grain crack index)	-	45000	-
Cl. No.8.4,Table no. 4(ii)(Density)	-	45000	-
Cl. No.8.4,Table no. 4(iii)(Abrasion resistance)	-	45000	-
Cl. No.8.4,Table no. 5(i)(Density)	-	45000	-
Cl. No.8.4,Table no. 5(ii)("Abrasion resistance, Volume loss ")	-	45000	-
Cl. No.8.4, Table no. 5(iii)("Flexing resistance, At 30 000 flexes")	-	45000	-
Cl. No.8.5, Table no. 6(i)("Bond strength, N/mm, Min (Applicable when fore part is fully covered or strap width is more than 25 mm)")	-	45000	-
Cl. No.8.5, Table no. 6(ii)("Toe post attachment strength, N, Min (Applicable if toe post is present)")	-	45000	-
Cl. No.8.5, Table no. 6(iii)("Toe ring attachment strength, Min (Applicable if toe ring is not integral part of upper")	-	45000	-
Cl. No.8.5, Table no. 6(iv)(Strap to outsole strength)	-	45000	-
Cl. No.8.5, Table no. 6(v)("Attachment strength of back strap and Buckle/D-ring ")	-	45000	-
Cl. No.8.5, Table no. 6(vi)("Attachment strength of elastic, limit of useful extension, percent")	-	45000	-
Cl. No.8.5, Table no. 6(vii)("Attachment strength of back strap and velcro, N, Min (If, present)")	-	45000	-
Cl. No.8.5, Table no. 6(viii)("Hydrolysis resistance, Cut growth after 150 000 flexes, mm, Max (Applicable for PU sole only)")	-	45000	-
Cl. No.8.5, Table no. 6(ix)("Heel pull off strength, N, Min (Applicable for heel height 40 mm and above attached separately to the sandal/slipper)")	-	45000	-
Cl. No.8.5, Table no. 6(x)("Inter layer bond strength, N/mm, (Applicable for multi-layer sole)")	-	45000	-
Cl. No.8.5, Table no. 6(xi)("Slip Resistance, Coefficient of Friction (COF) (Not applicable for leather sole) (To be carried out on quarry tiles)")	-	45000	-
Cl. No.8.("Requirement of Complete Sandal and Slipper (Chemical Requirements) ")	-	45000	-
Cl. No.9.(MARKING AND PACKING)	-	45000	-
Cl. No.8.6.1,Table 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	45000	-
Cl. No.8.6.1,Table 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	45000	-
Cl. No.8.6.1,Table 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	45000	-
Cl. No.8.6.1,Table 1 of IS 17011(iv)(Chromium (VI))	-	45000	-
Cl. No.8.6.1,Table 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	45000	-
Cl. No.8.6.1,Table 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	45000	-
Cl. No.8.6.1,Table 1 of IS 17011(vii)(Formaldehyde)	-	45000	-
Cl. No.8.6.1,Table 1 of IS 17011(viii)(Organotin compounds)	-	45000	-
Cl. No.8.6.1,Table 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	45000	-
Cl. No.8.6.1,Table 1 of IS 17011(x)(pH)	-	45000	-
Cl. No.8.6.1,Table 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	45000	-
Cl. No.8.6.1,Table 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	45000	-
Cl. No.8.6.2(Lead content)	-	45000	-
Cl-5 ((Amendment No-1)(Category And Type)	-	45000	-
Cl.8 Table-1 S.No 1, (i) (Amendment No-1)(Bond strength , N/mm, Min)	-	45000	-
Cl.8 Table-1 S.No 1, (ii) (Amendment No-1)(Toe post attachment strength)	-	45000	-
Cl.8 Table-1 S.No 1, (iii) (Amendment No-1)(Toe ring attachment strength)	-	45000	-
Cl.8 Table-1 S.No 1, (iv) (Amendment No-1)(Strap to outsole strength N, Min)	-	45000	-
Cl.8 Table-1 S.No 1, (v) (Amendment No-1)(Attachment strength of back strap and buckle/D-ring N, Min)	-	45000	-
Cl.8 Table-1 S.No 1, (vi) (Amendment No-1)(Limit of useful extension, percent, Min)	-	45000	-
Cl.8 Table-1 S.No 1, (vii) (Amendment No-1)(Attachment strength of back strap and velcro, N, Mi)	-	45000	-
Cl.8 Table-1 S.No 1, (viii) (Amendment No-1)(Hydrolysis resistance)	-	45000	-
Cl.8 Table-1 S.No 1, (ix) (Amendment No-1)(Heel pull off strength)	-	45000	-
Cl.8 Table-1 S.No 1, (x) (Amendment No-1)(Inter layer bond strength)	-	45000	-
Cl.8 Table-1 S.No 1, (xi) (Amendment No-1)(Slip resistance, coefficient of friction (COF)3)	-	45000	-
Cl.8 Table-1 S.No 1, (xii) (Amendment No-1)(Abrasion resistance, (volume loss) mm3 , Max)	-	45000	-
Cl.8 Table-1 S.No 1, (xiii) (Amendment No-1)("Flexing resistance (Belt method or Bennewart flex method)")	-	45000	-
Cl.8 Table-1 S.No 1, (xiv) (Amendment No-1)(Chemical Requirements)	-	45000	-
Cl.8 Table-1 S.No 1, (xv) (Amendment No-1)(Lead content (as Pb)7 ppm)	-	45000	-
Cl.9 Table-2 S.No 1, (i) a (Amendment No-1)(Tear strength for other than moulded upper material)	-	45000	-
Cl.9 Table-2 S.No 1, (i) b (Amendment No-1)(Tear strength For all moulded upper material)	-	45000	-
Cl.9 Table-2 S.No 1, (ii) (Amendment No-1)(Flexing endurance)	-	45000	-
Cl.9 Table-3 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	45000	-
Cl.9 Table-3 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	45000	-
Cl.9 Table-4 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	45000	-
Cl.9 Table-4 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	45000	-
Cl.9 Table-5 S.No 1, (i) (Amendment No-1)(Grain crack index)	-	45000	-
Cl.9 Table-5 S.No 1, (ii) (Amendment No-1)(Density, g/cm3 , Min)	-	45000	-
Cl.9 Table-5 S.No 1, (iii) (Amendment No-1)(Abrasion resistance, mm/kcs)	-	45000	-
Cl.9 Table-6 S.No 1, (i) (Amendment No-1)("Density, g/cm3 , Min (a)-Cellular, (b) Solid ")	-	45000	-
Cl-10 (Amendment No-1)(Marking)	-	45000	-
Cl.8 - Table No 1 - Sl. No.-xiv(pH- IS 1390:2022)	-	45000	-
Cl.8 - Table No 1 - Sl. No.-xv("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	45000	-
Cl.8 - Table No 1 - Sl. No.-xiv(pH- IS 1390:2022)	-	45000	-
Cl.8 - Table No 1 - Sl. No.-xv("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	45000	-

08 May, 2028

-
Included w.e.f.18.07.2025

137

IS 10702 (2023)

Hawai Chappal-Specification

ALL

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Material)	-	40000	-
4.2(Length)	-	40000	-
4.3(Thickness)	-	40000	-
4.4 , Table No. 1 , i)(Density)	-	40000	-
4.4 , Table No. 1 , ii)(2Compression set at constant stress)	-	40000	-
4.4 , Table No. 1 , iii)(3Split tear strength)	-	40000	-
4.4 , Table No. 1 , iv)("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber")	-	40000	-
4.4 , Table No. 1 , v)(5Abrasion resistance at applied force)	-	40000	-
4.4 , Table No. 1 , vi)(Flexing resistance: Maximum cut growth at 50 000 flexes)	-	40000	-
4.4 , Table No. 1 , vii)(7 Hydrolysis resistance, Maximum cut growth at 50 000 flexes)	-	40000	-
4.4 , Table No . 2 , i)(Density , Solid strap, Cellular strap)	-	40000	-
4.4 , Table No . 2 , ii)("Breaking strength , Strap to strap and Toe portion to strap , Elongation at break")	-	40000	-
4.4 , Table No . 2 , iii)(Minimum cross section of the stud)	-	40000	-
4.4 , Table No . 2 , iv)(Stud bolt)	-	40000	-
4.4 , Table No . 3 , i)(Toe post attachment strength)	-	40000	-
4.4 , Table No . 3 , ii)(Attachment strength of rear strap)	-	40000	-
4.4 , Table No . 3 , iii)(Inter layer bond strength)	-	40000	-
5(CHEMICAL REQUIREMENT FOR HAWAI CHAPPAL)	-	40000	-
6(MARKING AND PACKING)	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(iv)(Chromium (VI))	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(vii)(Formaldehyde)	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(viii)(Organotin compounds)	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(x)(pH)	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	40000	-
Cl.No. 5.2(lead content)	-	40000	-
Clause 4.1 - 4.1.1(Bottom Material)	-	40000	-
Clause 4.1 - 4.1.2(Strap Material)	-	40000	-
Clause 4.1 - 4.1.3(Material)	-	40000	-
Clause 4.1 - 4.1.4(Material)	-	40000	-
Clause 4.2(Material)	-	40000	-
Clause 4.3 - 4.3.1(Thickness)	-	40000	-
Clause 4.3 - 4.3.2(Thickness)	-	40000	-
Clause 4.4 Table 1 -i)(Density, g/cm3, Min)	-	40000	-
Clause 4.4 Table 1 -iii)(Split tear strength, kg, Min)	-	40000	-
Clause 4.4 Table 1 -iv) - a("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, percent, Max")	-	40000	-
Clause 4.4 Table 1 -iv) - b(Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber, percent, Max)	-	40000	-
Clause 4.4 Table 1 -v)(Abrasion resistance at applied force 5 N)	-	40000	-
Clause 4.4 Table 2 -i) - a("Density, g/cm3 Solid strap ")	-	40000	-
Clause 4.4 Table 2 -i) - b(Density, g/cm3 Cellular strap)	-	40000	-
Clause 4.4 Table 2 -ii) - a - 1("Breaking strength, kgf, Min Strap to strap(Solid Strap)")	-	40000	-
Clause 4.4 Table 2 -ii) - a - 2("Breaking strength, kgf, Min Strap to strap(Cellular Strap)")	-	40000	-
Clause 4.4 Table 2 -ii) - a - 3("Breaking strength, kgf, Min Toe portion to strap(Solid Strap)")	-	40000	-
Clause 4.4 Table 2 -ii) - a - 4("Breaking strength, kgf, Min Toe portion to strap(Cellular Strap)")	-	40000	-
Clause 4.4 Table 2 -ii) - b - 1("Elongation at break, percent (Applicable to strap to strap (V shape) Solid Strap")	-	40000	-
Clause 4.4 Table 2 -ii) - b - 2("Elongation at break, percent (Applicable to strap to strap (V shape) Cellular Strap")	-	40000	-
Clause 4.4 Table 2 -iii) - a("Minimum cross section of the stud, mm, Size 1 to 13 (Adult)")	-	40000	-
Clause 4.4 Table 2 -iii) - b("Minimum cross section of the stud, mm, Size 3 to 13 (Children)")	-	40000	-
Clause 4.4 Table 2 -iv) - a("Stud bolt, mm Diameter/edge to edge length")	-	40000	-
Clause 4.4 Table 2 -iv) - b("Stud bolt, mm Thickness")	-	40000	-
Clause 4.4 Table 3 -i)("Toe post attachment strength, N, Min")	-	40000	-
Clause 4.4 Table 3 -ii)("Attachment strength of rear strap, N, Min")	-	40000	-
Clause 4.4 Table 3 -iii)("Inter layer bond strength, N/mm, Min")	-	40000	-
Cl-4 ((Amendment No-1)(Category And Type)	-	40000	-
Cl-4.4, Table -1 S. No-1 (i) (Amendment No-1)(Compression set at constant stress)	-	40000	-
Cl-4.4, Table -1 S. No-1 (ii) (Amendment No-1)(Split tear strength)	-	40000	-
Cl-4.4, Table -1 S. No-1 (iii) (a)(Amendment No-1)("Shrinkage at Shrinkage at 50 °C ± 1 °C for 2 h for polymeric material, percent, Max ")	-	40000	-
Cl-4.4, Table -1 S. No-1 (iii)(b) (Amendment No-1)(Shrinkage at 100 °C ± 1 °C for 1 h for rubber, percent, Max)	-	40000	-
Cl-4.4, Table -1 S. No-1 (iv) (Amendment No-1)(Abrasion resistance at applied force)	-	40000	-
Cl-4.4, Table -1 S. No-1 (v) (Amendment No-1)(Flexing resistance: Maximum cut growth,)	-	40000	-
Cl-4.4, Table -1 S. No-1 (vi) (Amendment No-1)(Hydrolysis resistance:Maximum cut growth)	-	40000	-
Cl-4.4, Table -1 S. No-1 (vii) (Amendment No-1)(Chemical requirements)	-	40000	-
Cl-4.4, Table -1 S. No-1 (viii) (Amendment No-1)("Lead content (as Pb), ppm, Max")	-	40000	-
Cl-4.4, Table -2 S. No-1 (i), a (Amendment No-1)("Breaking strength for Strap to strap 1-Solid strap 2-Cellular strap")	-	40000	-
Cl-4.4, Table -2 S. No-1 (i), b (Amendment No-1)("Breaking strength for Toe portion to strap 1-Solid strap 2-Cellular strap")	-	40000	-
Cl-4.4, Table -2 S. No-1 (i), c (Amendment No-1)("Elongation at break , percent, Min 1-Solid strap 2-Cellular strap")	-	40000	-
Cl-4.4, Table -2 S. No-1 (ii), (Amendment No-1)(Chemical requirements)	-	40000	-
Cl-4.4, Table -2 S. No-1 (iii), (Amendment No-1)(Lead content (as Pb), in ppm, Max)	-	40000	-
Cl-4.4, Table -3 S. No-1 (i), (Amendment No-1)(Toe post attachment strength)	-	40000	-
Cl-4.4, Table -3 S. No-1 (ii), (Amendment No-1)(Attachment strength of rear strap)	-	40000	-
Cl-4.4, Table -3 S. No-1 (iii), (Amendment No-1)(Inter layer bond strength)	-	40000	-
Cl.4.4 - Table No 1 - Sl. No.-vii(pH- IS 1390:2022)	-	40000	-
Cl.4.4 - Table No 1 - Sl. No.-viii("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	40000	-
4.1(Material)	-	40000	-
4.2(Length)	-	40000	-
4.3(Thickness)	-	40000	-
4.4 , Table No. 1 , i)(Density)	-	40000	-
4.4 , Table No. 1 , ii)(2Compression set at constant stress)	-	40000	-
4.4 , Table No. 1 , iii)(3Split tear strength)	-	40000	-
4.4 , Table No. 1 , iv)("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber")	-	40000	-
4.4 , Table No. 1 , v)(5Abrasion resistance at applied force)	-	40000	-
4.4 , Table No. 1 , vi)(Flexing resistance: Maximum cut growth at 50 000 flexes)	-	40000	-
4.4 , Table No. 1 , vii)(7 Hydrolysis resistance, Maximum cut growth at 50 000 flexes)	-	40000	-
4.4 , Table No . 2 , i)(Density , Solid strap, Cellular strap)	-	40000	-
4.4 , Table No . 2 , ii)("Breaking strength , Strap to strap and Toe portion to strap , Elongation at break")	-	40000	-
4.4 , Table No . 2 , iii)(Minimum cross section of the stud)	-	40000	-
4.4 , Table No . 2 , iv)(Stud bolt)	-	40000	-
4.4 , Table No . 3 , i)(Toe post attachment strength)	-	40000	-
4.4 , Table No . 3 , ii)(Attachment strength of rear strap)	-	40000	-
4.4 , Table No . 3 , iii)(Inter layer bond strength)	-	40000	-
5(CHEMICAL REQUIREMENT FOR HAWAI CHAPPAL)	-	40000	-
6(MARKING AND PACKING)	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(iv)(Chromium (VI))	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(vii)(Formaldehyde)	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(viii)(Organotin compounds)	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(x)(pH)	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	40000	-
Cl.No. 5.2(lead content)	-	40000	-
Clause 4.1 - 4.1.1(Bottom Material)	-	40000	-
Clause 4.1 - 4.1.2(Strap Material)	-	40000	-
Clause 4.1 - 4.1.3(Material)	-	40000	-
Clause 4.1 - 4.1.4(Material)	-	40000	-
Clause 4.2(Material)	-	40000	-
Clause 4.3 - 4.3.1(Thickness)	-	40000	-
Clause 4.3 - 4.3.2(Thickness)	-	40000	-
Clause 4.4 Table 1 -i)(Density, g/cm3, Min)	-	40000	-
Clause 4.4 Table 1 -iii)(Split tear strength, kg, Min)	-	40000	-
Clause 4.4 Table 1 -iv) - a("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, percent, Max")	-	40000	-
Clause 4.4 Table 1 -iv) - b(Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber, percent, Max)	-	40000	-
Clause 4.4 Table 1 -v)(Abrasion resistance at applied force 5 N)	-	40000	-
Clause 4.4 Table 2 -i) - a("Density, g/cm3 Solid strap ")	-	40000	-
Clause 4.4 Table 2 -i) - b(Density, g/cm3 Cellular strap)	-	40000	-
Clause 4.4 Table 2 -ii) - a - 1("Breaking strength, kgf, Min Strap to strap(Solid Strap)")	-	40000	-
Clause 4.4 Table 2 -ii) - a - 2("Breaking strength, kgf, Min Strap to strap(Cellular Strap)")	-	40000	-
Clause 4.4 Table 2 -ii) - a - 3("Breaking strength, kgf, Min Toe portion to strap(Solid Strap)")	-	40000	-
Clause 4.4 Table 2 -ii) - a - 4("Breaking strength, kgf, Min Toe portion to strap(Cellular Strap)")	-	40000	-
Clause 4.4 Table 2 -ii) - b - 1("Elongation at break, percent (Applicable to strap to strap (V shape) Solid Strap")	-	40000	-
Clause 4.4 Table 2 -ii) - b - 2("Elongation at break, percent (Applicable to strap to strap (V shape) Cellular Strap")	-	40000	-
Clause 4.4 Table 2 -iii) - a("Minimum cross section of the stud, mm, Size 1 to 13 (Adult)")	-	40000	-
Clause 4.4 Table 2 -iii) - b("Minimum cross section of the stud, mm, Size 3 to 13 (Children)")	-	40000	-
Clause 4.4 Table 2 -iv) - a("Stud bolt, mm Diameter/edge to edge length")	-	40000	-
Clause 4.4 Table 2 -iv) - b("Stud bolt, mm Thickness")	-	40000	-
Clause 4.4 Table 3 -i)("Toe post attachment strength, N, Min")	-	40000	-
Clause 4.4 Table 3 -ii)("Attachment strength of rear strap, N, Min")	-	40000	-
Clause 4.4 Table 3 -iii)("Inter layer bond strength, N/mm, Min")	-	40000	-
Cl-4 ((Amendment No-1)(Category And Type)	-	40000	-
Cl-4.4, Table -1 S. No-1 (i) (Amendment No-1)(Compression set at constant stress)	-	40000	-
Cl-4.4, Table -1 S. No-1 (ii) (Amendment No-1)(Split tear strength)	-	40000	-
Cl-4.4, Table -1 S. No-1 (iii) (a)(Amendment No-1)("Shrinkage at Shrinkage at 50 °C ± 1 °C for 2 h for polymeric material, percent, Max ")	-	40000	-
Cl-4.4, Table -1 S. No-1 (iii)(b) (Amendment No-1)(Shrinkage at 100 °C ± 1 °C for 1 h for rubber, percent, Max)	-	40000	-
Cl-4.4, Table -1 S. No-1 (iv) (Amendment No-1)(Abrasion resistance at applied force)	-	40000	-
Cl-4.4, Table -1 S. No-1 (v) (Amendment No-1)(Flexing resistance: Maximum cut growth,)	-	40000	-
Cl-4.4, Table -1 S. No-1 (vi) (Amendment No-1)(Hydrolysis resistance:Maximum cut growth)	-	40000	-
Cl-4.4, Table -1 S. No-1 (vii) (Amendment No-1)(Chemical requirements)	-	40000	-
Cl-4.4, Table -1 S. No-1 (viii) (Amendment No-1)("Lead content (as Pb), ppm, Max")	-	40000	-
Cl-4.4, Table -2 S. No-1 (i), a (Amendment No-1)("Breaking strength for Strap to strap 1-Solid strap 2-Cellular strap")	-	40000	-
Cl-4.4, Table -2 S. No-1 (i), b (Amendment No-1)("Breaking strength for Toe portion to strap 1-Solid strap 2-Cellular strap")	-	4000040000	-
Cl-4.4, Table -2 S. No-1 (i), c (Amendment No-1)("Elongation at break , percent, Min 1-Solid strap 2-Cellular strap")	-	40000	-
Cl-4.4, Table -2 S. No-1 (ii), (Amendment No-1)(Chemical requirements)	-	40000	-
Cl-4.4, Table -2 S. No-1 (iii), (Amendment No-1)(Lead content (as Pb), in ppm, Max)	-	40000	-
Cl-4.4, Table -3 S. No-1 (i), (Amendment No-1)(Toe post attachment strength)	-	40000	-
Cl-4.4, Table -3 S. No-1 (ii), (Amendment No-1)(Attachment strength of rear strap)	-	40000	-
Cl-4.4, Table -3 S. No-1 (iii), (Amendment No-1)(Inter layer bond strength)	-	40000	-
Cl.4.4 - Table No 1 - Sl. No.-vii(pH- IS 1390:2022)	-	40000	-
Cl.4.4 - Table No 1 - Sl. No.-viii("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	40000	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	40000	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	40000	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	40000	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	40000	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	40000	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	40000	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	40000	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	40000	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	40000	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	40000	-
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	40000	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	40000	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	40000	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	40000	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	40000	-
4.1(Material)	-	0	-
4.2(Length)	-	0	-
4.3(Thickness)	-	0	-
4.4 , Table No. 1 , i)(Density)	-	0	-
4.4 , Table No. 1 , ii)(2Compression set at constant stress)	-	0	-
4.4 , Table No. 1 , iii)(3Split tear strength)	-	0	-
4.4 , Table No. 1 , iv)("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber")	-	0	-
4.4 , Table No. 1 , v)(5Abrasion resistance at applied force)	-	0	-
4.4 , Table No. 1 , vi)(Flexing resistance: Maximum cut growth at 50 000 flexes)	-	0	-
4.4 , Table No. 1 , vii)(7 Hydrolysis resistance, Maximum cut growth at 50 000 flexes)	-	0	-
4.4 , Table No . 2 , i)(Density , Solid strap, Cellular strap)	-	0	-
4.4 , Table No . 2 , ii)("Breaking strength , Strap to strap and Toe portion to strap , Elongation at break")	-	0	-
4.4 , Table No . 2 , iii)(Minimum cross section of the stud)	-	0	-
4.4 , Table No . 2 , iv)(Stud bolt)	-	0	-
4.4 , Table No . 3 , i)(Toe post attachment strength)	-	0	-
4.4 , Table No . 3 , ii)(Attachment strength of rear strap)	-	0	-
4.4 , Table No . 3 , iii)(Inter layer bond strength)	-	0	-
5(CHEMICAL REQUIREMENT FOR HAWAI CHAPPAL)	-	0	-
6(MARKING AND PACKING)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(iv)(Chromium (VI))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(vii)(Formaldehyde)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(viii)(Organotin compounds)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(x)(pH)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	0	-
Cl.No. 5.2(lead content)	-	0	-
Clause 4.1 - 4.1.1(Bottom Material)	-	0	-
Clause 4.1 - 4.1.2(Strap Material)	-	0	-
Clause 4.1 - 4.1.3(Material)	-	0	-
Clause 4.1 - 4.1.4(Material)	-	0	-
Clause 4.2(Material)	-	0	-
Clause 4.3 - 4.3.1(Thickness)	-	0	-
Clause 4.3 - 4.3.2(Thickness)	-	0	-
Clause 4.4 Table 1 -i)(Density, g/cm3, Min)	-	0	-
Clause 4.4 Table 1 -iii)(Split tear strength, kg, Min)	-	0	-
Clause 4.4 Table 1 -iv) - a("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, percent, Max")	-	0	-
Clause 4.4 Table 1 -iv) - b(Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber, percent, Max)	-	0	-
Clause 4.4 Table 1 -v)(Abrasion resistance at applied force 5 N)	-	0	-
Clause 4.4 Table 2 -i) - a("Density, g/cm3 Solid strap ")	-	0	-
Clause 4.4 Table 2 -i) - b(Density, g/cm3 Cellular strap)	-	0	-
Clause 4.4 Table 2 -ii) - a - 1("Breaking strength, kgf, Min Strap to strap(Solid Strap)")	-	0	-
Clause 4.4 Table 2 -ii) - a - 2("Breaking strength, kgf, Min Strap to strap(Cellular Strap)")	-	0	-
Clause 4.4 Table 2 -ii) - a - 3("Breaking strength, kgf, Min Toe portion to strap(Solid Strap)")	-	0	-
Clause 4.4 Table 2 -ii) - a - 4("Breaking strength, kgf, Min Toe portion to strap(Cellular Strap)")	-	0	-
Clause 4.4 Table 2 -ii) - b - 1("Elongation at break, percent (Applicable to strap to strap (V shape) Solid Strap")	-	0	-
Clause 4.4 Table 2 -ii) - b - 2("Elongation at break, percent (Applicable to strap to strap (V shape) Cellular Strap")	-	0	-
Clause 4.4 Table 2 -iii) - a("Minimum cross section of the stud, mm, Size 1 to 13 (Adult)")	-	0	-
Clause 4.4 Table 2 -iii) - b("Minimum cross section of the stud, mm, Size 3 to 13 (Children)")	-	0	-
Clause 4.4 Table 2 -iv) - a("Stud bolt, mm Diameter/edge to edge length")	-	0	-
Clause 4.4 Table 2 -iv) - b("Stud bolt, mm Thickness")	-	0	-
Clause 4.4 Table 3 -i)("Toe post attachment strength, N, Min")	-	0	-
Clause 4.4 Table 3 -ii)("Attachment strength of rear strap, N, Min")	-	0	-
Clause 4.4 Table 3 -iii)("Inter layer bond strength, N/mm, Min")	-	0	-
Cl-4 ((Amendment No-1)(Category And Type)	-	0	-
Cl-4.4, Table -1 S. No-1 (i) (Amendment No-1)(Compression set at constant stress)	-	0	-
Cl-4.4, Table -1 S. No-1 (ii) (Amendment No-1)(Split tear strength)	-	0	-
Cl-4.4, Table -1 S. No-1 (iii) (a)(Amendment No-1)("Shrinkage at Shrinkage at 50 °C ± 1 °C for 2 h for polymeric material, percent, Max ")	-	0	-
Cl-4.4, Table -1 S. No-1 (iii)(b) (Amendment No-1)(Shrinkage at 100 °C ± 1 °C for 1 h for rubber, percent, Max)	-	0	-
Cl-4.4, Table -1 S. No-1 (iv) (Amendment No-1)(Abrasion resistance at applied force)	-	0	-
Cl-4.4, Table -1 S. No-1 (v) (Amendment No-1)(Flexing resistance: Maximum cut growth,)	-	0	-
Cl-4.4, Table -1 S. No-1 (vi) (Amendment No-1)(Hydrolysis resistance:Maximum cut growth)	-	0	-
Cl-4.4, Table -1 S. No-1 (vii) (Amendment No-1)(Chemical requirements)	-	0	-
Cl-4.4, Table -1 S. No-1 (viii) (Amendment No-1)("Lead content (as Pb), ppm, Max")	-	0	-
Cl-4.4, Table -2 S. No-1 (i), a (Amendment No-1)("Breaking strength for Strap to strap 1-Solid strap 2-Cellular strap")	-	0	-
Cl-4.4, Table -2 S. No-1 (i), b (Amendment No-1)("Breaking strength for Toe portion to strap 1-Solid strap 2-Cellular strap")	-	0	-
Cl-4.4, Table -2 S. No-1 (i), c (Amendment No-1)("Elongation at break , percent, Min 1-Solid strap 2-Cellular strap")	-	0	-
Cl-4.4, Table -2 S. No-1 (ii), (Amendment No-1)(Chemical requirements)	-	0	-
Cl-4.4, Table -2 S. No-1 (iii), (Amendment No-1)(Lead content (as Pb), in ppm, Max)	-	0	-
Cl-4.4, Table -3 S. No-1 (i), (Amendment No-1)(Toe post attachment strength)	-	0	-
Cl-4.4, Table -3 S. No-1 (ii), (Amendment No-1)(Attachment strength of rear strap)	-	0	-
Cl-4.4, Table -3 S. No-1 (iii), (Amendment No-1)(Inter layer bond strength)	-	0	-
Cl.4.4 - Table No 1 - Sl. No.-vii(pH- IS 1390:2022)	-	0	-
Cl.4.4 - Table No 1 - Sl. No.-viii("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	0	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	0	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	0	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	0	-
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	0	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	0	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	0	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	0	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	0	-
4.1(Material)	-	40000	-
4.2(Length)	-	40000	-
4.3(Thickness)	-	40000	-
4.4 , Table No. 1 , i)(Density)	-	40000	-
4.4 , Table No. 1 , ii)(2Compression set at constant stress)	-	40000	-
4.4 , Table No. 1 , iii)(3Split tear strength)	-	40000	-
4.4 , Table No. 1 , iv)("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber")	-	40000	-
4.4 , Table No. 1 , v)(5Abrasion resistance at applied force)	-	40000	-
4.4 , Table No. 1 , vi)(Flexing resistance: Maximum cut growth at 50 000 flexes)	-	40000	-
4.4 , Table No. 1 , vii)(7 Hydrolysis resistance, Maximum cut growth at 50 000 flexes)	-	40000	-
4.4 , Table No . 2 , i)(Density , Solid strap, Cellular strap)	-	40000	-
4.4 , Table No . 2 , ii)("Breaking strength , Strap to strap and Toe portion to strap , Elongation at break")	-	40000	-
4.4 , Table No . 2 , iii)(Minimum cross section of the stud)	-	40000	-
4.4 , Table No . 2 , iv)(Stud bolt)	-	40000	-
4.4 , Table No . 3 , i)(Toe post attachment strength)	-	40000	-
4.4 , Table No . 3 , ii)(Attachment strength of rear strap)	-	40000	-
4.4 , Table No . 3 , iii)(Inter layer bond strength)	-	40000	-
5(CHEMICAL REQUIREMENT FOR HAWAI CHAPPAL)	-	40000	-
6(MARKING AND PACKING)	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(iv)(Chromium (VI))	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(vii)(Formaldehyde)	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(viii)(Organotin compounds)	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(x)(pH)	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	40000	-
Cl.No. 5.2(lead content)	-	40000	-
Clause 4.1 - 4.1.1(Bottom Material)	-	40000	-
Clause 4.1 - 4.1.2(Strap Material)	-	40000	-
Clause 4.1 - 4.1.3(Material)	-	40000	-
Clause 4.1 - 4.1.4(Material)	-	40000	-
Clause 4.2(Material)	-	40000	-
Clause 4.3 - 4.3.1(Thickness)	-	40000	-
Clause 4.3 - 4.3.2(Thickness)	-	40000	-
Clause 4.4 Table 1 -i)(Density, g/cm3, Min)	-	40000	-
Clause 4.4 Table 1 -iii)(Split tear strength, kg, Min)	-	40000	-
Clause 4.4 Table 1 -iv) - a("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, percent, Max")	-	40000	-
Clause 4.4 Table 1 -iv) - b(Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber, percent, Max)	-	40000	-
Clause 4.4 Table 1 -v)(Abrasion resistance at applied force 5 N)	-	40000	-
Clause 4.4 Table 2 -i) - a("Density, g/cm3 Solid strap ")	-	40000	-
Clause 4.4 Table 2 -i) - b(Density, g/cm3 Cellular strap)	-	40000	-
Clause 4.4 Table 2 -ii) - a - 1("Breaking strength, kgf, Min Strap to strap(Solid Strap)")	-	40000	-
Clause 4.4 Table 2 -ii) - a - 2("Breaking strength, kgf, Min Strap to strap(Cellular Strap)")	-	40000	-
Clause 4.4 Table 2 -ii) - a - 3("Breaking strength, kgf, Min Toe portion to strap(Solid Strap)")	-	40000	-
Clause 4.4 Table 2 -ii) - a - 4("Breaking strength, kgf, Min Toe portion to strap(Cellular Strap)")	-	40000	-
Clause 4.4 Table 2 -ii) - b - 1("Elongation at break, percent (Applicable to strap to strap (V shape) Solid Strap")	-	40000	-
Clause 4.4 Table 2 -ii) - b - 2("Elongation at break, percent (Applicable to strap to strap (V shape) Cellular Strap")	-	40000	-
Clause 4.4 Table 2 -iii) - a("Minimum cross section of the stud, mm, Size 1 to 13 (Adult)")	-	40000	-
Clause 4.4 Table 2 -iii) - b("Minimum cross section of the stud, mm, Size 3 to 13 (Children)")	-	40000	-
Clause 4.4 Table 2 -iv) - a("Stud bolt, mm Diameter/edge to edge length")	-	40000	-
Clause 4.4 Table 2 -iv) - b("Stud bolt, mm Thickness")	-	40000	-
Clause 4.4 Table 3 -i)("Toe post attachment strength, N, Min")	-	40000	-
Clause 4.4 Table 3 -ii)("Attachment strength of rear strap, N, Min")	-	40000	-
Clause 4.4 Table 3 -iii)("Inter layer bond strength, N/mm, Min")	-	40000	-
Cl-4 ((Amendment No-1)(Category And Type)	-	40000	-
Cl-4.4, Table -1 S. No-1 (i) (Amendment No-1)(Compression set at constant stress)	-	40000	-
Cl-4.4, Table -1 S. No-1 (ii) (Amendment No-1)(Split tear strength)	-	40000	-
Cl-4.4, Table -1 S. No-1 (iii) (a)(Amendment No-1)("Shrinkage at Shrinkage at 50 °C ± 1 °C for 2 h for polymeric material, percent, Max ")	-	40000	-
Cl-4.4, Table -1 S. No-1 (iii)(b) (Amendment No-1)(Shrinkage at 100 °C ± 1 °C for 1 h for rubber, percent, Max)	-	40000	-
Cl-4.4, Table -1 S. No-1 (iv) (Amendment No-1)(Abrasion resistance at applied force)	-	40000	-
Cl-4.4, Table -1 S. No-1 (v) (Amendment No-1)(Flexing resistance: Maximum cut growth,)	-	40000	-
Cl-4.4, Table -1 S. No-1 (vi) (Amendment No-1)(Hydrolysis resistance:Maximum cut growth)	-	40000	-
Cl-4.4, Table -1 S. No-1 (vii) (Amendment No-1)(Chemical requirements)	-	40000	-
Cl-4.4, Table -1 S. No-1 (viii) (Amendment No-1)("Lead content (as Pb), ppm, Max")	-	40000	-
Cl-4.4, Table -2 S. No-1 (i), a (Amendment No-1)("Breaking strength for Strap to strap 1-Solid strap 2-Cellular strap")	-	40000	-
Cl-4.4, Table -2 S. No-1 (i), b (Amendment No-1)("Breaking strength for Toe portion to strap 1-Solid strap 2-Cellular strap")	-	40000	-
Cl-4.4, Table -2 S. No-1 (i), c (Amendment No-1)("Elongation at break , percent, Min 1-Solid strap 2-Cellular strap")	-	40000	-
Cl-4.4, Table -2 S. No-1 (ii), (Amendment No-1)(Chemical requirements)	-	40000	-
Cl-4.4, Table -2 S. No-1 (iii), (Amendment No-1)(Lead content (as Pb), in ppm, Max)	-	40000	-
Cl-4.4, Table -3 S. No-1 (i), (Amendment No-1)(Toe post attachment strength)	-	40000	-
Cl-4.4, Table -3 S. No-1 (ii), (Amendment No-1)(Attachment strength of rear strap)	-	40000	-
Cl-4.4, Table -3 S. No-1 (iii), (Amendment No-1)(Inter layer bond strength)	-	40000	-
Cl.4.4 - Table No 1 - Sl. No.-vii(pH- IS 1390:2022)	-	40000	-
Cl.4.4 - Table No 1 - Sl. No.-viii("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	40000	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	40000	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	40000	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	40000	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	40000	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	40000	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	40000	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	40000	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	40000	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	40000	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	40000	-
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	40000	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	40000	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	40000	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	40000	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	40000	-
4.1(Material)	-	0	-
4.2(Length)	-	0	-
4.3(Thickness)	-	0	-
4.4 , Table No. 1 , i)(Density)	-	0	-
4.4 , Table No. 1 , ii)(2Compression set at constant stress)	-	0	-
4.4 , Table No. 1 , iii)(3Split tear strength)	-	0	-
4.4 , Table No. 1 , iv)("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber")	-	0	-
4.4 , Table No. 1 , v)(5Abrasion resistance at applied force)	-	0	-
4.4 , Table No. 1 , vi)(Flexing resistance: Maximum cut growth at 50 000 flexes)	-	0	-
4.4 , Table No. 1 , vii)(7 Hydrolysis resistance, Maximum cut growth at 50 000 flexes)	-	0	-
4.4 , Table No . 2 , i)(Density , Solid strap, Cellular strap)	-	0	-
4.4 , Table No . 2 , ii)("Breaking strength , Strap to strap and Toe portion to strap , Elongation at break")	-	0	-
4.4 , Table No . 2 , iii)(Minimum cross section of the stud)	-	0	-
4.4 , Table No . 2 , iv)(Stud bolt)	-	0	-
4.4 , Table No . 3 , i)(Toe post attachment strength)	-	0	-
4.4 , Table No . 3 , ii)(Attachment strength of rear strap)	-	0	-
4.4 , Table No . 3 , iii)(Inter layer bond strength)	-	0	-
5(CHEMICAL REQUIREMENT FOR HAWAI CHAPPAL)	-	0	-
6(MARKING AND PACKING)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(iv)(Chromium (VI))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(vii)(Formaldehyde)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(viii)(Organotin compounds)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(x)(pH)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	0	-
Cl.No. 5.2(lead content)	-	0	-
Clause 4.1 - 4.1.1(Bottom Material)	-	0	-
Clause 4.1 - 4.1.2(Strap Material)	-	0	-
Clause 4.1 - 4.1.3(Material)	-	0	-
Clause 4.1 - 4.1.4(Material)	-	0	-
Clause 4.2(Material)	-	0	-
Clause 4.3 - 4.3.1(Thickness)	-	0	-
Clause 4.3 - 4.3.2(Thickness)	-	0	-
Clause 4.4 Table 1 -i)(Density, g/cm3, Min)	-	0	-
Clause 4.4 Table 1 -iii)(Split tear strength, kg, Min)	-	0	-
Clause 4.4 Table 1 -iv) - a("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, percent, Max")	-	0	-
Clause 4.4 Table 1 -iv) - b(Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber, percent, Max)	-	0	-
Clause 4.4 Table 1 -v)(Abrasion resistance at applied force 5 N)	-	0	-
Clause 4.4 Table 2 -i) - a("Density, g/cm3 Solid strap ")	-	0	-
Clause 4.4 Table 2 -i) - b(Density, g/cm3 Cellular strap)	-	0	-
Clause 4.4 Table 2 -ii) - a - 1("Breaking strength, kgf, Min Strap to strap(Solid Strap)")	-	0	-
Clause 4.4 Table 2 -ii) - a - 2("Breaking strength, kgf, Min Strap to strap(Cellular Strap)")	-	0	-
Clause 4.4 Table 2 -ii) - a - 3("Breaking strength, kgf, Min Toe portion to strap(Solid Strap)")	-	0	-
Clause 4.4 Table 2 -ii) - a - 4("Breaking strength, kgf, Min Toe portion to strap(Cellular Strap)")	-	0	-
Clause 4.4 Table 2 -ii) - b - 1("Elongation at break, percent (Applicable to strap to strap (V shape) Solid Strap")	-	0	-
Clause 4.4 Table 2 -ii) - b - 2("Elongation at break, percent (Applicable to strap to strap (V shape) Cellular Strap")	-	0	-
Clause 4.4 Table 2 -iii) - a("Minimum cross section of the stud, mm, Size 1 to 13 (Adult)")	-	0	-
Clause 4.4 Table 2 -iii) - b("Minimum cross section of the stud, mm, Size 3 to 13 (Children)")	-	0	-
Clause 4.4 Table 2 -iv) - a("Stud bolt, mm Diameter/edge to edge length")	-	0	-
Clause 4.4 Table 2 -iv) - b("Stud bolt, mm Thickness")	-	0	-
Clause 4.4 Table 3 -i)("Toe post attachment strength, N, Min")	-	0	-
Clause 4.4 Table 3 -ii)("Attachment strength of rear strap, N, Min")	-	0	-
Clause 4.4 Table 3 -iii)("Inter layer bond strength, N/mm, Min")	-	0	-
Cl-4 ((Amendment No-1)(Category And Type)	-	0	-
Cl-4.4, Table -1 S. No-1 (i) (Amendment No-1)(Compression set at constant stress)	-	0	-
Cl-4.4, Table -1 S. No-1 (ii) (Amendment No-1)(Split tear strength)	-	0	-
Cl-4.4, Table -1 S. No-1 (iii) (a)(Amendment No-1)("Shrinkage at Shrinkage at 50 °C ± 1 °C for 2 h for polymeric material, percent, Max ")	-	0	-
Cl-4.4, Table -1 S. No-1 (iii)(b) (Amendment No-1)(Shrinkage at 100 °C ± 1 °C for 1 h for rubber, percent, Max)	-	0	-
Cl-4.4, Table -1 S. No-1 (iv) (Amendment No-1)(Abrasion resistance at applied force)	-	0	-
Cl-4.4, Table -1 S. No-1 (v) (Amendment No-1)(Flexing resistance: Maximum cut growth,)	-	0	-
Cl-4.4, Table -1 S. No-1 (vi) (Amendment No-1)(Hydrolysis resistance:Maximum cut growth)	-	0	-
Cl-4.4, Table -1 S. No-1 (vii) (Amendment No-1)(Chemical requirements)	-	0	-
Cl-4.4, Table -1 S. No-1 (viii) (Amendment No-1)("Lead content (as Pb), ppm, Max")	-	0	-
Cl-4.4, Table -2 S. No-1 (i), a (Amendment No-1)("Breaking strength for Strap to strap 1-Solid strap 2-Cellular strap")	-	0	-
Cl-4.4, Table -2 S. No-1 (i), b (Amendment No-1)("Breaking strength for Toe portion to strap 1-Solid strap 2-Cellular strap")	-	0	-
Cl-4.4, Table -2 S. No-1 (i), c (Amendment No-1)("Elongation at break , percent, Min 1-Solid strap 2-Cellular strap")	-	0	-
Cl-4.4, Table -2 S. No-1 (ii), (Amendment No-1)(Chemical requirements)	-	0	-
Cl-4.4, Table -2 S. No-1 (iii), (Amendment No-1)(Lead content (as Pb), in ppm, Max)	-	0	-
Cl-4.4, Table -3 S. No-1 (i), (Amendment No-1)(Toe post attachment strength)	-	0	-
Cl-4.4, Table -3 S. No-1 (ii), (Amendment No-1)(Attachment strength of rear strap)	-	0	-
Cl-4.4, Table -3 S. No-1 (iii), (Amendment No-1)(Inter layer bond strength)	-	0	-
Cl.4.4 - Table No 1 - Sl. No.-vii(pH- IS 1390:2022)	-	0	-
Cl.4.4 - Table No 1 - Sl. No.-viii("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	0	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	0	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	0	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	0	-
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	0	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	0	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	0	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	0	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	0	-
4.1(Material)	-	0	-
4.2(Length)	-	0	-
4.3(Thickness)	-	0	-
4.4 , Table No. 1 , i)(Density)	-	0	-
4.4 , Table No. 1 , ii)(2Compression set at constant stress)	-	0	-
4.4 , Table No. 1 , iii)(3Split tear strength)	-	0	-
4.4 , Table No. 1 , iv)("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber")	-	0	-
4.4 , Table No. 1 , v)(5Abrasion resistance at applied force)	-	0	-
4.4 , Table No. 1 , vi)(Flexing resistance: Maximum cut growth at 50 000 flexes)	-	0	-
4.4 , Table No. 1 , vii)(7 Hydrolysis resistance, Maximum cut growth at 50 000 flexes)	-	0	-
4.4 , Table No . 2 , i)(Density , Solid strap, Cellular strap)	-	0	-
4.4 , Table No . 2 , ii)("Breaking strength , Strap to strap and Toe portion to strap , Elongation at break")	-	0	-
4.4 , Table No . 2 , iii)(Minimum cross section of the stud)	-	0	-
4.4 , Table No . 2 , iv)(Stud bolt)	-	0	-
4.4 , Table No . 3 , i)(Toe post attachment strength)	-	0	-
4.4 , Table No . 3 , ii)(Attachment strength of rear strap)	-	0	-
4.4 , Table No . 3 , iii)(Inter layer bond strength)	-	0	-
5(CHEMICAL REQUIREMENT FOR HAWAI CHAPPAL)	-	0	-
6(MARKING AND PACKING)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(iv)(Chromium (VI))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(vii)(Formaldehyde)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(viii)(Organotin compounds)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(x)(pH)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	0	-
Cl.No. 5.2(lead content)	-	0	-
Clause 4.1 - 4.1.1(Bottom Material)	-	0	-
Clause 4.1 - 4.1.2(Strap Material)	-	0	-
Clause 4.1 - 4.1.3(Material)	-	0	-
Clause 4.1 - 4.1.4(Material)	-	0	-
Clause 4.2(Material)	-	0	-
Clause 4.3 - 4.3.1(Thickness)	-	0	-
Clause 4.3 - 4.3.2(Thickness)	-	0	-
Clause 4.4 Table 1 -i)(Density, g/cm3, Min)	-	0	-
Clause 4.4 Table 1 -iii)(Split tear strength, kg, Min)	-	0	-
Clause 4.4 Table 1 -iv) - a("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, percent, Max")	-	0	-
Clause 4.4 Table 1 -iv) - b(Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber, percent, Max)	-	0	-
Clause 4.4 Table 1 -v)(Abrasion resistance at applied force 5 N)	-	0	-
Clause 4.4 Table 2 -i) - a("Density, g/cm3 Solid strap ")	-	0	-
Clause 4.4 Table 2 -i) - b(Density, g/cm3 Cellular strap)	-	0	-
Clause 4.4 Table 2 -ii) - a - 1("Breaking strength, kgf, Min Strap to strap(Solid Strap)")	-	0	-
Clause 4.4 Table 2 -ii) - a - 2("Breaking strength, kgf, Min Strap to strap(Cellular Strap)")	-	0	-
Clause 4.4 Table 2 -ii) - a - 3("Breaking strength, kgf, Min Toe portion to strap(Solid Strap)")	-	0	-
Clause 4.4 Table 2 -ii) - a - 4("Breaking strength, kgf, Min Toe portion to strap(Cellular Strap)")	-	0	-
Clause 4.4 Table 2 -ii) - b - 1("Elongation at break, percent (Applicable to strap to strap (V shape) Solid Strap")	-	0	-
Clause 4.4 Table 2 -ii) - b - 2("Elongation at break, percent (Applicable to strap to strap (V shape) Cellular Strap")	-	0	-
Clause 4.4 Table 2 -iii) - a("Minimum cross section of the stud, mm, Size 1 to 13 (Adult)")	-	0	-
Clause 4.4 Table 2 -iii) - b("Minimum cross section of the stud, mm, Size 3 to 13 (Children)")	-	0	-
Clause 4.4 Table 2 -iv) - a("Stud bolt, mm Diameter/edge to edge length")	-	0	-
Clause 4.4 Table 2 -iv) - b("Stud bolt, mm Thickness")	-	0	-
Clause 4.4 Table 3 -i)("Toe post attachment strength, N, Min")	-	0	-
Clause 4.4 Table 3 -ii)("Attachment strength of rear strap, N, Min")	-	0	-
Clause 4.4 Table 3 -iii)("Inter layer bond strength, N/mm, Min")	-	0	-
Cl-4 ((Amendment No-1)(Category And Type)	-	0	-
Cl-4.4, Table -1 S. No-1 (i) (Amendment No-1)(Compression set at constant stress)	-	0	-
Cl-4.4, Table -1 S. No-1 (ii) (Amendment No-1)(Split tear strength)	-	0	-
Cl-4.4, Table -1 S. No-1 (iii) (a)(Amendment No-1)("Shrinkage at Shrinkage at 50 °C ± 1 °C for 2 h for polymeric material, percent, Max ")	-	0	-
Cl-4.4, Table -1 S. No-1 (iii)(b) (Amendment No-1)(Shrinkage at 100 °C ± 1 °C for 1 h for rubber, percent, Max)	-	0	-
Cl-4.4, Table -1 S. No-1 (iv) (Amendment No-1)(Abrasion resistance at applied force)	-	0	-
Cl-4.4, Table -1 S. No-1 (v) (Amendment No-1)(Flexing resistance: Maximum cut growth,)	-	0	-
Cl-4.4, Table -1 S. No-1 (vi) (Amendment No-1)(Hydrolysis resistance:Maximum cut growth)	-	0	-
Cl-4.4, Table -1 S. No-1 (vii) (Amendment No-1)(Chemical requirements)	-	0	-
Cl-4.4, Table -1 S. No-1 (viii) (Amendment No-1)("Lead content (as Pb), ppm, Max")	-	0	-
Cl-4.4, Table -2 S. No-1 (i), a (Amendment No-1)("Breaking strength for Strap to strap 1-Solid strap 2-Cellular strap")	-	0	-
Cl-4.4, Table -2 S. No-1 (i), b (Amendment No-1)("Breaking strength for Toe portion to strap 1-Solid strap 2-Cellular strap")	-	0	-
Cl-4.4, Table -2 S. No-1 (i), c (Amendment No-1)("Elongation at break , percent, Min 1-Solid strap 2-Cellular strap")	-	0	-
Cl-4.4, Table -2 S. No-1 (ii), (Amendment No-1)(Chemical requirements)	-	0	-
Cl-4.4, Table -2 S. No-1 (iii), (Amendment No-1)(Lead content (as Pb), in ppm, Max)	-	0	-
Cl-4.4, Table -3 S. No-1 (i), (Amendment No-1)(Toe post attachment strength)	-	0	-
Cl-4.4, Table -3 S. No-1 (ii), (Amendment No-1)(Attachment strength of rear strap)	-	0	-
Cl-4.4, Table -3 S. No-1 (iii), (Amendment No-1)(Inter layer bond strength)	-	0	-
Cl.4.4 - Table No 1 - Sl. No.-vii(pH- IS 1390:2022)	-	0	-
Cl.4.4 - Table No 1 - Sl. No.-viii("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	0	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	0	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	0	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	0	-
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	0	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	0	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	0	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	0	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	0	-
4.1(Material)	-	0	-
4.2(Length)	-	0	-
4.3(Thickness)	-	0	-
4.4 , Table No. 1 , i)(Density)	-	0	-
4.4 , Table No. 1 , ii)(2Compression set at constant stress)	-	0	-
4.4 , Table No. 1 , iii)(3Split tear strength)	-	0	-
4.4 , Table No. 1 , iv)("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber")	-	0	-
4.4 , Table No. 1 , v)(5Abrasion resistance at applied force)	-	0	-
4.4 , Table No. 1 , vi)(Flexing resistance: Maximum cut growth at 50 000 flexes)	-	0	-
4.4 , Table No. 1 , vii)(7 Hydrolysis resistance, Maximum cut growth at 50 000 flexes)	-	0	-
4.4 , Table No . 2 , i)(Density , Solid strap, Cellular strap)	-	0	-
4.4 , Table No . 2 , ii)("Breaking strength , Strap to strap and Toe portion to strap , Elongation at break")	-	0	-
4.4 , Table No . 2 , iii)(Minimum cross section of the stud)	-	0	-
4.4 , Table No . 2 , iv)(Stud bolt)	-	0	-
4.4 , Table No . 3 , i)(Toe post attachment strength)	-	0	-
4.4 , Table No . 3 , ii)(Attachment strength of rear strap)	-	0	-
4.4 , Table No . 3 , iii)(Inter layer bond strength)	-	0	-
5(CHEMICAL REQUIREMENT FOR HAWAI CHAPPAL)	-	0	-
6(MARKING AND PACKING)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(iv)(Chromium (VI))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(vii)(Formaldehyde)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(viii)(Organotin compounds)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(x)(pH)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	0	-
Cl.No. 5.2(lead content)	-	0	-
Clause 4.1 - 4.1.1(Bottom Material)	-	0	-
Clause 4.1 - 4.1.2(Strap Material)	-	0	-
Clause 4.1 - 4.1.3(Material)	-	0	-
Clause 4.1 - 4.1.4(Material)	-	0	-
Clause 4.2(Material)	-	0	-
Clause 4.3 - 4.3.1(Thickness)	-	0	-
Clause 4.3 - 4.3.2(Thickness)	-	0	-
Clause 4.4 Table 1 -i)(Density, g/cm3, Min)	-	0	-
Clause 4.4 Table 1 -iii)(Split tear strength, kg, Min)	-	0	-
Clause 4.4 Table 1 -iv) - a("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, percent, Max")	-	0	-
Clause 4.4 Table 1 -iv) - b(Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber, percent, Max)	-	0	-
Clause 4.4 Table 1 -v)(Abrasion resistance at applied force 5 N)	-	0	-
Clause 4.4 Table 2 -i) - a("Density, g/cm3 Solid strap ")	-	0	-
Clause 4.4 Table 2 -i) - b(Density, g/cm3 Cellular strap)	-	0	-
Clause 4.4 Table 2 -ii) - a - 1("Breaking strength, kgf, Min Strap to strap(Solid Strap)")	-	0	-
Clause 4.4 Table 2 -ii) - a - 2("Breaking strength, kgf, Min Strap to strap(Cellular Strap)")	-	0	-
Clause 4.4 Table 2 -ii) - a - 3("Breaking strength, kgf, Min Toe portion to strap(Solid Strap)")	-	0	-
Clause 4.4 Table 2 -ii) - a - 4("Breaking strength, kgf, Min Toe portion to strap(Cellular Strap)")	-	0	-
Clause 4.4 Table 2 -ii) - b - 1("Elongation at break, percent (Applicable to strap to strap (V shape) Solid Strap")	-	0	-
Clause 4.4 Table 2 -ii) - b - 2("Elongation at break, percent (Applicable to strap to strap (V shape) Cellular Strap")	-	0	-
Clause 4.4 Table 2 -iii) - a("Minimum cross section of the stud, mm, Size 1 to 13 (Adult)")	-	0	-
Clause 4.4 Table 2 -iii) - b("Minimum cross section of the stud, mm, Size 3 to 13 (Children)")	-	0	-
Clause 4.4 Table 2 -iv) - a("Stud bolt, mm Diameter/edge to edge length")	-	0	-
Clause 4.4 Table 2 -iv) - b("Stud bolt, mm Thickness")	-	0	-
Clause 4.4 Table 3 -i)("Toe post attachment strength, N, Min")	-	0	-
Clause 4.4 Table 3 -ii)("Attachment strength of rear strap, N, Min")	-	0	-
Clause 4.4 Table 3 -iii)("Inter layer bond strength, N/mm, Min")	-	0	-
Cl-4 ((Amendment No-1)(Category And Type)	-	0	-
Cl-4.4, Table -1 S. No-1 (i) (Amendment No-1)(Compression set at constant stress)	-	0	-
Cl-4.4, Table -1 S. No-1 (ii) (Amendment No-1)(Split tear strength)	-	0	-
Cl-4.4, Table -1 S. No-1 (iii) (a)(Amendment No-1)("Shrinkage at Shrinkage at 50 °C ± 1 °C for 2 h for polymeric material, percent, Max ")	-	0	-
Cl-4.4, Table -1 S. No-1 (iii)(b) (Amendment No-1)(Shrinkage at 100 °C ± 1 °C for 1 h for rubber, percent, Max)	-	0	-
Cl-4.4, Table -1 S. No-1 (iv) (Amendment No-1)(Abrasion resistance at applied force)	-	0	-
Cl-4.4, Table -1 S. No-1 (v) (Amendment No-1)(Flexing resistance: Maximum cut growth,)	-	0	-
Cl-4.4, Table -1 S. No-1 (vi) (Amendment No-1)(Hydrolysis resistance:Maximum cut growth)	-	0	-
Cl-4.4, Table -1 S. No-1 (vii) (Amendment No-1)(Chemical requirements)	-	0	-
Cl-4.4, Table -1 S. No-1 (viii) (Amendment No-1)("Lead content (as Pb), ppm, Max")	-	0	-
Cl-4.4, Table -2 S. No-1 (i), a (Amendment No-1)("Breaking strength for Strap to strap 1-Solid strap 2-Cellular strap")	-	0	-
Cl-4.4, Table -2 S. No-1 (i), b (Amendment No-1)("Breaking strength for Toe portion to strap 1-Solid strap 2-Cellular strap")	-	0	-
Cl-4.4, Table -2 S. No-1 (i), c (Amendment No-1)("Elongation at break , percent, Min 1-Solid strap 2-Cellular strap")	-	0	-
Cl-4.4, Table -2 S. No-1 (ii), (Amendment No-1)(Chemical requirements)	-	0	-
Cl-4.4, Table -2 S. No-1 (iii), (Amendment No-1)(Lead content (as Pb), in ppm, Max)	-	0	-
Cl-4.4, Table -3 S. No-1 (i), (Amendment No-1)(Toe post attachment strength)	-	0	-
Cl-4.4, Table -3 S. No-1 (ii), (Amendment No-1)(Attachment strength of rear strap)	-	0	-
Cl-4.4, Table -3 S. No-1 (iii), (Amendment No-1)(Inter layer bond strength)	-	0	-
Cl.4.4 - Table No 1 - Sl. No.-vii(pH- IS 1390:2022)	-	0	-
Cl.4.4 - Table No 1 - Sl. No.-viii("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	0	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	0	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	0	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	0	-
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	0	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	0	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	0	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	0	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	0	-

08 May, 2028

-
Included w.e.f.18.07.2025

138

IS 15844 : Part 1 (2023)

SPORTS FOOTWEAR PART -1 GENERAL PURPOSEFirst Revision

all

59100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl No.4.1(Sampling and Conditioning)	-	59100	-
Cl No.4.2(Construction)	-	59100	-
Cl No.4.3(Whole Footwear)	-	59100	-
4.3.1(Insole)	-	59100	-
4.3.2(Toe spring height)	-	59100	-
4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	59100	-
4.3.4("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	59100	-
4.3.5(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	59100	-
4.3.6(Energy Absorption at Seat Region)	-	59100	-
4.3.7(Complete Shoe Flexing)	-	59100	-
4.3.8(Washability)	-	59100	-
4.3.9(Slip Resistance)	-	59100	-
Cl No.4.4 , Table No. 2 , i) , a)(Flexing resistance, Dry condition)	-	59100	-
Cl No.4.4 , Table No. 2 , i) , b)(Flexing resistance, Wet condition)	-	59100	-
Cl No.4.4 , Table No. 2 , ii)(Tear strength (average force), Min, N)	-	59100	-
Cl No.4.4 , Table No. 2 , iii) , a)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Dry: (rubbing) Rating: (Marring and staining) ")	-	59100	-
Cl No.4.4 , Table No. 2 , iii) , b)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Wet: (rubbing) Rating: (Marring and staining)")	-	59100	-
Cl No.4.4 , Table No. 2 , iv) , a)(Water vapour permeability, mg/cm2h, Min)	-	59100	-
Cl No.4.4 , Table No. 2 , iv) , b)(Water vapour coefficient, mg/cm2 , Min)	-	59100	-
Cl No.4.4 , Table No. 2 , v)(Stitch tear strength (double hole), N/mm, Min)	-	59100	-
Cl No.4.4 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Min Rating: (Marring)")	-	59100	-
Cl No.4.4 , Table No. 2 , i)(Breaking strength, N/mm, Min)	-	59100	-
Cl No.4.4 , Table No. 2 , ii)(Elongation at break, percent Min)	-	59100	-
Cl No.4.4 , Table No. 2 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	59100	-
Cl No.4.4 , Table No. 2 , iv) , a)(Flexing resistance, Dry condition)	-	59100	-
Cl No.4.4 , Table No. 2 , iv) , b)(Flexing resistance, ,Wet condition)	-	59100	-
Cl No.4.4 , Table No. 2 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	59100	-
Cl No.4.4 , Table No. 2 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	59100	-
Cl No.4.4 , Table No. 2 , vi)(Hydrolysis resistance)	-	59100	-
Cl No.4.4 , Table No. 2 , vii)(Bursting Strength, kg/cm2 , Min)	-	59100	-
Cl No.4.5 , Table No. 3 , i)(Tear strength, N, Min)	-	59100	-
Cl No.4.5 , Table No. 3 , ii)(Abrasion resistance, cycles)	-	59100	-
Cl No.4.5 , Table No. 3 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, Min")	-	59100	-
Cl No.4.5 , Table No. 3 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, Min")	-	59100	-
Cl No.4.5 , Table No. 3 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	59100	-
Cl No.4.5 , Table No. 3 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	59100	-
Cl No.4.6 , Table No. 4 , i)(Thickness, mm, Min)	-	59100	-
Cl No.4.6 , Table No. 4 , ii)(Flexing index, Min)	-	59100	-
Cl No.4.6 , Table No. 4 , iii)(Abrasion resistance, at 400 cycles)	-	59100	-
Cl No.4.6 , Table No. 4 , iv) , a)(Water Absorption, mg/cm2 , Min)	-	59100	-
Cl No.4.6 , Table No. 4 , iv) , b)(Water Desorption, percent, Min)	-	59100	-
Cl No.4.7, Table No. 5 , i)(Thickness, mm, Min)	-	59100	-
Cl No.4.7, Table No. 5 , ii)(Abrasion resistance, cycles)	-	59100	-
Cl No.4.7, Table No. 5 , iii) , a)(Water Absorption, mg/cm2 , Min)	-	59100	-
Cl No.4.7, Table No. 5 , iii) , b)(Water Desorption, percent, Min)	-	59100	-
Cl No.4.8 , Table No. 6 , i)(Abrasion resistance (Volume loss), mm3 , Max)	-	59100	-
Cl No.4.8 , Table No. 6 , ii)("Flexing resistance Belt Method at 90 diameter Mandrel or Bennewart method, cut growth, Max")	-	59100	-
Cl No.4.8 , Table No. 6 , iii)("Hydrolysis resistance, cut growth after 150 000 flexes, in mm, Max")	-	59100	-
Cl No.4.9 , Table No. 7 , i)(Compression set, percent, Max)	-	59100	-
Cl No.4.9 , Table No. 7 , ii)(Split tear strength, kg/25 mm, Min)	-	59100	-
Cl No.4.9 , Table No. 7 , iii)(Heat shrinkage, percent, Max)	-	59100	-
Cl No.4.10 , Table No. 8 , i)(First dry collapsing load, hardness, N, Min)	-	59100	-
Cl No.4.10 , Table No. 8 , ii)(Resilience, percent, Min)	-	59100	-
Cl No.4.10 , Table No. 8 , iii)(Moisture resistance, percent, Min)	-	59100	-
Cl No.4.10 , Table No. 8 , iv) , a)(Initial dry area shape retention, percent, Min)	-	59100	-
Cl No.4.10 , Table No. 8 , iv) , b)(Area shape retention after 10th collapse, dry, percent, Min)	-	59100	-
Cl No.4.11 , Table No. 9 , i)(Peel strength, N/mm, Min)	-	59100	-
Cl No.4.11 , Table No. 9 , ii)(Shear strength, kPa , Min)	-	59100	-
Cl No.4.12 , Table No. 10 , i)(Limit of useful extension, percent, Min)	-	59100	-
Cl No.4.13 , Table No. 11 , i)(Breaking strength of lace, N, Min)	-	59100	-
Cl No.4.13 , Table No. 11 , ii)(Lace tag strength, N, Min)	-	59100	-
Cl No.4.13 , Table No. 11 , iii)(Lace to lace abrasion,)	-	59100	-
Cl No.4.13 , Table No. 11 , iv)("Colour fastness to water Gray Scale Rate, Min Rating")	-	59100	-
Cl No.4.13 , Table No. 11 , v)(Strength of Buckle/Ski hook, N, Min)	-	59100	-
Cl No.4.13 , Table No. 11 , vi)(Corrosion resistance)	-	59100	-
Cl No . 4.14("Chemical Requirement on Complete Product for all Types of Sports Shoe")	-	59100	-
Cl No . 5(MARKING AND PACKING)	-	59100	-
Cl No . 4.14, Table no. 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	59100	-
Cl No . 4.14, Table no. 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	59100	-
Cl No . 4.14, Table no. 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	59100	-
Cl No . 4.14, Table no. 1 of IS 17011(iv)(Chromium (VI))	-	59100	-
Cl No . 4.14, Table no. 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	59100	-
Cl No . 4.14, Table no. 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	59100	-
Cl No . 4.14, Table no. 1 of IS 17011(vii)(Formaldehyde)	-	59100	-
Cl No . 4.14, Table no. 1 of IS 17011(viii)(Organotin compounds)	-	59100	-
Cl No . 4.14, Table no. 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	59100	-
Cl No . 4.14, Table no. 1 of IS 17011(x)(pH)	-	59100	-
Cl No . 4.14, Table no. 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	59100	-
Cl No . 4.14, Table no. 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	59100	-
Clause 4.2 - 4.2.1(Construction)	-	59100	-
Clause 4.2 - 4.2.2(Construction)	-	59100	-
Clause 4.3 - 4.3.1(Whole Footwear)	-	59100	-
Clause 4.3 - 4.3.2(Whole Footwear)	-	59100	-
Clause 4.3 - 4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	59100	-
Clause 4.3 - 4.3.4(Upper to Composite Sole Bond Performance(Applicable Only When the Sole is Composite))	-	59100	-
Clause 4.3 - 4.3.5(Out Sole to Mid Sole (Multilayer) Bond)	-	59100	-
Clause 4.3 - 4.3.7(Complete Shoe Flexing)	-	59100	-
Clause 4.4, Table 1 ii)(Tear strength)	-	59100	-
Clause 4.4, Table 1 iv)-a(Water Vapour Permeability)	-	59100	-
Clause 4.4, Table 1 iv)-b(Water Vapour Coeffecient)	-	59100	-
Clause 4.4, Table 1 v)(Stitch Tear Strength(Double Hole))	-	59100	-
Clause 4.4, Table 2 i)(Breaking Strength)	-	59100	-
Clause 4.4, Table 2 ii)(Elongation at break)	-	59100	-
Clause 4.4, Table 2 iii)(Tear strength)	-	59100	-
Clause 4.4, Table 2 v)-a(Water Vapour Permeability)	-	59100	-
Clause 4.4, Table 2 v)-b(Water Vapour Coeffecient)	-	59100	-
Clause 4.5, Table 3 i)(Tear strength)	-	59100	-
Clause 4.5, Table 3 ii)(Abrasion Resistance)	-	59100	-
Clause 4.5, Table 3 v)-a(Water Vapour Permeability)	-	59100	-
Clause 4.5, Table 3 v)-b(Water Vapour Coeffecient)	-	59100	-
Clause 4.6, Table 4 i)(Thickness)	-	59100	-
Clause 4.6, Table 4 ii)(Abrasion Resistance)	-	59100	-
Clause 4.6, Table 4 iv)-a(Water Absorption)	-	59100	-
Clause 4.6, Table 4 iv)-b(Water Desorption)	-	59100	-
Clause 4.7, Table 5 i)(Thickness)	-	59100	-
Clause 4.7, Table 5 ii)(Abrasion Resistance)	-	59100	-
Clause 4.7, Table 5 iii)-a(Water Absorption)	-	59100	-
Clause 4.7, Table 5 iii)-b(Water Desorption)	-	59100	-
Clause 4.8, Table 6 i)(Abrasion Resistance)	-	59100	-
Clause 4.8, Table 6 ii)(Flexing Resistance)	-	59100	-
Clause 4.8, Table 6 iii)(Hydrolysis Resistance)	-	59100	-
Clause 4.9, Table 7 ii)(Split Tear strength)	-	59100	-
Clause 4.9, Table 7 iii)(Heat shrinkage)	-	59100	-
Cl-5, Table -1 S. No-(i) (Amendment No-1)(Insole)	-	59100	-
Cl-5, Table -1 S. No- (ii) (Amendment No-1)(Toe spring height)	-	59100	-
Cl-5, Table -1 S. No- (iii) (Amendment No-1)("Bond performance (a) Upper to sole/mid sole/composite sole (b) Interlayer bond strength")	-	59100	-
Cl-5, Table -1 S. No- (iv) (Amendment No-1)(Energy absorption at seat region)	-	59100	-
Cl-5, Table -1 S. No- (v) (Amendment No-1)(Complete shoe flexing)	-	59100	-
Cl-5, Table -1 S. No-(vi) (Amendment No-1)(Washability)	-	59100	-
Cl-5, Table -1 S. No- (vii) (Amendment No-1)(Slip resistance, coefficient of friction (COF),)	-	59100	-
Cl-5, Table -1 S. No- (viii) (Amendment No-1)("Abrasion resistance a-Cellular sole b-Solid sole")	-	59100	-
Cl-5, Table -1 S. No- (x) (Amendment No-1)(Chemical requirements)	-	59100	-
Cl-5, Table -1 S. No- (xi) (Amendment No-1)(Hydrolysis resistance)	-	59100	-
Cl-5, Table -1 S. No- (xii) (Amendment No-1)(Lead content)	-	59100	-
Cl-6, Table -2 S. No- (i) (Amendment No-1)(Tear strength)	-	59100	-
Cl-6, Table -2 S. No- (ii) (Amendment No-1)("Colour fastness rubbing a-Dry: (rubbing) b-Wet: (rubbing)")	-	59100	-
Cl-6, Table -2 S. No- (iii), a) (Amendment No-1)(Water vapour permeability)	-	59100	-
Cl-6, Table -2 S. No- (iii), b) (Amendment No-1)(Water vapour coefficient)	-	59100	-
Cl-6, Table -2 S. No- (iv),(Amendment No-1)(Stitch tear strength)	-	59100	-
Cl-6, Table -2 S. No- (v),(Amendment No-1)(Colour fastness to light grey scale rate,)	-	59100	-
Cl-6, Table -3 S. No- (i),(Amendment No-1)(Breaking strength, N/mm, Min)	-	59100	-
Cl-6, Table -3 S. No- (ii),(Amendment No-1)("Elongation at break a-Tighter direction b-Stretch direction")	-	59100	-
Cl-6, Table -3 S. No- (iii),(Amendment No-1)("Tear strength, N, Min a) For fabric b) For all other materials")	-	59100	-
Cl-6, Table -3 S. No- (iv),(Amendment No-1)("Flexing resistance a- Dry condition b-Wet condition")	-	59100	-
Cl-6, Table -3 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	59100	-
Cl-6, Table -3 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	59100	-
Cl-6, Table -3 S. No- (vi), (Amendment No-1)(Hydrolysis resistance)	-	59100	-
Cl-6, Table -3 S. No- (vii), (Amendment No-1)(Bursting strength)	-	59100	-
Cl-6, Table -4 S. No- (i),(Amendment No-1)(Tear strength, N, Min)	-	59100	-
Cl-6, Table -4 S. No- (ii),(Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	59100	-
Cl-6, Table -4 S. No- (iii),(Amendment No-1)(Colour fastness to rubbing , grey scale rate with 10 rubs on dry or wet, Min)	-	59100	-
Cl-6, Table -4 S. No- (iv),(Amendment No-1)(Colour fastness to perspiration)	-	59100	-
Cl-6, Table -4 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	59100	-
Cl-6, Table -4 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	59100	-
Cl-6, Table -5 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	59100	-
Cl-6, Table -5 S. No-(ii), (Amendment No-1)(Flexing index, Min)	-	59100	-
Cl-6, Table -5 S. No-(iii), (Amendment No-1)(Abrasion resistance,)	-	59100	-
Cl-6, Table -5 S. No- (iv), a (Amendment No-1)(Water absorption)	-	59100	-
Cl-6, Table -5 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	59100	-
Cl-6, Table -6 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	59100	-
Cl-6, Table -6 S. No- (ii), (Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	59100	-
Cl-6, Table -6 S. No- (iii),a (Amendment No-1)(Water absorption)	-	59100	-
Cl-6, Table -6 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	59100	-
Cl-6, Table -7 S. No- (i), (Amendment No-1)(Flexing resistance (Belt method or Bennewart method))	-	59100	-
Cl-6, Table -7 S. No- (ii), (Amendment No-1)(Hydrolysis resistance, cut growth after flexes)	-	59100	-
Cl-6, Table -8 S. No- (i), (Amendment No-1)("Compression set, percent, Max a) For EVA b) For all other materials")	-	59100	-
Cl-6, Table -8 S. No- (ii), (Amendment No-1)(Split tear strength)	-	59100	-
Cl-6, Table -8 S. No- (iii), (Amendment No-1)(Heat shrinkage)	-	59100	-
Cl-6, Table -9 S. No- (i), (Amendment No-1)(First dry collapsing load, hardness)	-	59100	-
Cl-6, Table -9 S. No- (ii), (Amendment No-1)(Resilience, percent)	-	59100	-
Cl-6, Table -9 S. No- (iii), (Amendment No-1)(Moisture resistance)	-	59100	-
Cl-6, Table -9 S. No- (iv), a (Amendment No-1)(Initial dry area shape retention)	-	59100	-
Cl-6, Table -9 S. No- (iv), b (Amendment No-1)(Area shape retention after 10th collapse)	-	59100	-
Cl-6, Table -10 S. No- (i), (Amendment No-1)("Peel strength a) Initial b) After 5 000 wear cycles")	-	59100	-
Cl-6, Table -10 S. No- (ii), (Amendment No-1)("Shear strength a) Initial b) After 5 000 wear cycles")	-	59100	-
Cl-6, Table -11 S. No- (i), (Amendment No-1)(Limit of useful extension)	-	59100	-
Cl-6, Table -12 S. No- (i), (Amendment No-1)(Breaking strength of lace)	-	59100	-
Cl-6, Table -12 S. No- (ii), (Amendment No-1)(Lace tag strength)	-	59100	-
Cl-6, Table -12 S. No- (iii), (Amendment No-1)(Lace to lace abrasion)	-	59100	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	59100	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	59100	-
Cl-6, Table -12 S. No (v), (Amendment No-1)(Strength of buckle/ski hook)	-	59100	-
Cl-6, Table -12 S. No- (vi), (Amendment No-1)(Corrosion resistance)	-	59100	-

08 May, 2028

-
Inccluded w.e.f.18.07.2025

139

IS 7867 (2024)

Textiles ï¿½ Continuous Filament Polyamide (Nylon 6) Yarn ï¿½ Specification ( Second revision )

55000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Identification and Notation of Polyamide (Nylon 6) Yarns)	-	20000	-
Cl-5.1, 7.3 Table-2, 3 & 4 (i)(Cross section, circular,triangular,trilobal, slit,hollow, hexagonal)	-	10000	-
Cl-5.1, 7.3, Table-2, 3 & 4 (ii)(Linear density (Denier))	-	1000	-
Cl-5.1, 7.3, Table-2, 3 & 4 (iii)(No. of filaments (as declared))	-	1000	-
Cl-5.1, 7.3, Table-2, 3 & 4 (iv)(Tenacity, gpd,)	-	1000	-
Cl-5.1,7.3, Table-2, 3 & 4- (v)(Elongation at break, percent)	-	1000	-
Cl-5.1,7.3, Table-2, 3 & 4 (vi)(Boiling water shrinkage, percent)	-	1000	-
Cl-5.1,7.3, Table-2, 3 & 4 (vii)(Spin finish oil pick-up,percent,)	-	1000	-
Cl-5.1,7.3, Table-2, 3. & 4 (viii)(Unevenness of linear density (normal), percent,)	-	1000	-
Cl-5.1, 7.3, Table-2, 3 & 4 (ix)(Lustre, titanium dioxide content, percent,)	-	1000	-
Cl-5.1, 7.3, Table-2, 3 & 4 (ix)(Full dull (FD))	-	1000	-
Cl-5.1,7.3, Table-2, 3 & 4 (ix)(Semi dull (SD)/ SDOB)	-	1000	-
Cl-5.1, 7.3, Table-2, 3 & 4 (ix)(Bright (BRT)/OBRT)	-	1000	-
Cl-5.1,7.3, Table-2, 3 & 4 (x)(Moisture regain, percent, Max)	-	1000	-
Cl-5.1,7.3, Table-2, 3 & 4 (xi)(Water soluble matter, percent, Max)	-	1000	-
Cl-5.1, 7.3, Table-2, 3 & 4 (xii)(Limiting oxygen index, Min for fire retardant yarns only))	-	1000	-
Cl-5.1,7.3, Table-2, 3 & 4 (xiii)(Ultraviolet resistance, UV Blamp, 144 h, percent retained strength, Min)	-	5000	-
Cl-5.1, 7.3, Table-2, 3 & 4 (xiv)(Anti-microbial activity value, Min (for anti-microbial yarn only))	-	10000	-
Cl-5.1,7.3, Table-2, 3 & 4 (xv)(Colour strength with reference to standard yarn, percent)	-	1000	-
Cl-5.1,7.3, Table-2, 3 & 4 (xvi)(Colour difference with reference to standard yarn, measured as ΔE, Max)	-	1000	-
Cl-5.1,7.3 Table-2, 3 &4 (xvii)(Colour fastness to light (for dope dyed yarns only), Min)	-	1000	-
Cl-5.2(Freedom from Yarn Defects)	-	1000	-
Cl-5.3(Commercial Mass)	-	1000	-
Cl-5.4, Table-5 (i)(Total free and releasable formaldehyde, mg/kg (ppm), Max)	-	1000	-
Cl-5.4, Table-5 (ii) (a)(Mercury)	-	1000	-
Cl-5.4, Table-5 (ii) (b)(Chromium III)	-	1000	-
Cl-5.4, Table-5 (ii) (c)(Chromium VI)	-	1000	-
Cl-5.4, Table-5 (ii) (d)(Lead)	-	1000	-
Cl-5.4, Table-5 (ii) (e)(Cadmium)	-	1000	-
Cl-5.4, Table-5 (ii) (f)(Copper)	-	1000	-
Cl-5.4, Table-5 (ii) (g)(Antimony)	-	1000	-
Cl-5.4, Table-5 (iii)(Pentachlorophenol, ppm, Max)	-	1000	-
Cl-5.4, Table-5 (iv)(Pesticides, (sum parameter), ppm, Max)	-	5000	-
Cl-5.4, Table-5 (v)(Banned Pesticides, ppm, Max)	-	5000	-
Cl-5.4, Table-5 (vi)(Banned azo colourants (arylamines), ppm, Max (for dyed yarns only))	-	5000	-
Cl-7(Marking)	-	0	-
Cl-4.1(Identification and Notation of Polyamide (Nylon 6) Yarns)	-	10000	-
Cl-5.1, 7.3 Table-2, 3 & 4 (i)(Cross section, circular,triangular,trilobal, slit,hollow, hexagonal)	-	1000	-
Cl-5.1, 7.3, Table-2, 3 & 4 (ii)(Linear density (Denier))	-	1000	-
Cl-5.1, 7.3, Table-2, 3 & 4 (iii)(No. of filaments (as declared))	-	1000	-
Cl-5.1, 7.3, Table-2, 3 & 4 (iv)(Tenacity, gpd,)	-	1000	-
Cl-5.1,7.3, Table-2, 3 & 4- (v)(Elongation at break, percent)	-	1000	-
Cl-5.1,7.3, Table-2, 3 & 4 (vi)(Boiling water shrinkage, percent)	-	1000	-
Cl-5.1,7.3, Table-2, 3 & 4 (vii)(Spin finish oil pick-up,percent,)	-	1000	-
Cl-5.1,7.3, Table-2, 3. & 4 (viii)(Unevenness of linear density (normal), percent,)	-	1000	-
Cl-5.1, 7.3, Table-2, 3 & 4 (ix)(Lustre, titanium dioxide content, percent,)	-	1000	-
Cl-5.1, 7.3, Table-2, 3 & 4 (ix)(Full dull (FD))	-	1000	-
Cl-5.1,7.3, Table-2, 3 & 4 (ix)(Semi dull (SD)/ SDOB)	-	1000	-
Cl-5.1, 7.3, Table-2, 3 & 4 (ix)(Bright (BRT)/OBRT)	-	1000	-
Cl-5.1,7.3, Table-2, 3 & 4 (x)(Moisture regain, percent, Max)	-	1000	-
Cl-5.1,7.3, Table-2, 3 & 4 (xi)(Water soluble matter, percent, Max)	-	1000	-
Cl-5.1, 7.3, Table-2, 3 & 4 (xii)(Limiting oxygen index, Min for fire retardant yarns only))	-	1000	-
Cl-5.1,7.3, Table-2, 3 & 4 (xiii)(Ultraviolet resistance, UV Blamp, 144 h, percent retained strength, Min)	-	1000	-
Cl-5.1, 7.3, Table-2, 3 & 4 (xiv)(Anti-microbial activity value, Min (for anti-microbial yarn only))	-	10000	-
Cl-5.1,7.3, Table-2, 3 & 4 (xv)(Colour strength with reference to standard yarn, percent)	-	1000	-
Cl-5.1,7.3, Table-2, 3 & 4 (xvi)(Colour difference with reference to standard yarn, measured as ΔE, Max)	-	1000	-
Cl-5.1,7.3 Table-2, 3 &4 (xvii)(Colour fastness to light (for dope dyed yarns only), Min)	-	1000	-
Cl-5.2(Freedom from Yarn Defects)	-	1000	-
Cl-5.3(Commercial Mass)	-	1000	-
Cl-5.4, Table-5 (i)(Total free and releasable formaldehyde, mg/kg (ppm), Max)	-	1000	-
Cl-5.4, Table-5 (ii) (a)(Mercury)	-	1000	-
Cl-5.4, Table-5 (ii) (b)(Chromium III)	-	1000	-
Cl-5.4, Table-5 (ii) (c)(Chromium VI)	-	1000	00
Cl-5.4, Table-5 (ii) (d)(Lead)	-	1000	-
Cl-5.4, Table-5 (ii) (e)(Cadmium)	-	1000	-
Cl-5.4, Table-5 (ii) (f)(Copper)	-	1000	-
Cl-5.4, Table-5 (ii) (g)(Antimony)	-	1000	-
Cl-5.4, Table-5 (iii)(Pentachlorophenol, ppm, Max)	-	5000	-
Cl-5.4, Table-5 (iv)(Pesticides, (sum parameter), ppm, Max)	-	5000	-
Cl-5.4, Table-5 (v)(Banned Pesticides, ppm, Max)	-	5000	-
Cl-5.4, Table-5 (vi)(Banned azo colourants (arylamines), ppm, Max (for dyed yarns only))	-	5000	-
Cl-7(Marking)	-	1000	-
Cl-4.1(Identification and Notation of Polyamide (Nylon 6) Yarns)	-	1000	-
Cl-5.1, 7.3 Table-2, 3 & 4 (i)(Cross section, circular,triangular,trilobal, slit,hollow, hexagonal)	-	1000	-
Cl-5.1, 7.3, Table-2, 3 & 4 (ii)(Linear density (Denier))	-	1000	-
Cl-5.1, 7.3, Table-2, 3 & 4 (iii)(No. of filaments (as declared))	-	1000	-
Cl-5.1, 7.3, Table-2, 3 & 4 (iv)(Tenacity, gpd,)	-	1000	-
Cl-5.1,7.3, Table-2, 3 & 4- (v)(Elongation at break, percent)	-	1000	-
Cl-5.1,7.3, Table-2, 3 & 4 (vi)(Boiling water shrinkage, percent)	-	1000	-
Cl-5.1,7.3, Table-2, 3 & 4 (vii)(Spin finish oil pick-up,percent,)	-	1000	-
Cl-5.1,7.3, Table-2, 3. & 4 (viii)(Unevenness of linear density (normal), percent,)	-	1000	-
Cl-5.1, 7.3, Table-2, 3 & 4 (ix)(Lustre, titanium dioxide content, percent,)	-	1000	-
Cl-5.1, 7.3, Table-2, 3 & 4 (ix)(Full dull (FD))	-	1000	-
Cl-5.1,7.3, Table-2, 3 & 4 (ix)(Semi dull (SD)/ SDOB)	-	1000	-
Cl-5.1, 7.3, Table-2, 3 & 4 (ix)(Bright (BRT)/OBRT)	-	1000	-
Cl-5.1,7.3, Table-2, 3 & 4 (x)(Moisture regain, percent, Max)	-	1000	-
Cl-5.1,7.3, Table-2, 3 & 4 (xi)(Water soluble matter, percent, Max)	-	1000	-
Cl-5.1, 7.3, Table-2, 3 & 4 (xii)(Limiting oxygen index, Min for fire retardant yarns only))	-	1000	-
Cl-5.1,7.3, Table-2, 3 & 4 (xiii)(Ultraviolet resistance, UV Blamp, 144 h, percent retained strength, Min)	-	1000	-
Cl-5.1, 7.3, Table-2, 3 & 4 (xiv)(Anti-microbial activity value, Min (for anti-microbial yarn only))	-	1000	-
Cl-5.1,7.3, Table-2, 3 & 4 (xv)(Colour strength with reference to standard yarn, percent)	-	1000	-
Cl-5.1,7.3, Table-2, 3 & 4 (xvi)(Colour difference with reference to standard yarn, measured as ΔE, Max)	-	1000	-
Cl-5.1,7.3 Table-2, 3 &4 (xvii)(Colour fastness to light (for dope dyed yarns only), Min)	-	1000	-
Cl-5.2(Freedom from Yarn Defects)	-	1000	-
Cl-5.3(Commercial Mass)	-	1000	-
Cl-5.4, Table-5 (i)(Total free and releasable formaldehyde, mg/kg (ppm), Max)	-	1000	-
Cl-5.4, Table-5 (ii) (a)(Mercury)	-	1000	-
Cl-5.4, Table-5 (ii) (b)(Chromium III)	-	1000	-
Cl-5.4, Table-5 (ii) (c)(Chromium VI)	-	1000	-
Cl-5.4, Table-5 (ii) (d)(Lead)	-	1000	-
Cl-5.4, Table-5 (ii) (e)(Cadmium)	-	1000	-
Cl-5.4, Table-5 (ii) (f)(Copper)	-	1000	-
Cl-5.4, Table-5 (ii) (g)(Antimony)	-	1000	-
Cl-5.4, Table-5 (iii)(Pentachlorophenol, ppm, Max)	-	1000	-
Cl-5.4, Table-5 (iv)(Pesticides, (sum parameter), ppm, Max)	-	5000	-
Cl-5.4, Table-5 (v)(Banned Pesticides, ppm, Max)	-	5000	-
Cl-5.4, Table-5 (vi)(Banned azo colourants (arylamines), ppm, Max (for dyed yarns only))	-	5000	-
Cl-7(Marking)	-	0	-
Cl-4.1(Identification and Notation of Polyamide (Nylon 6) Yarns)	-	0	-
Cl-5.1, 7.3 Table-2, 3 & 4 (i)(Cross section, circular,triangular,trilobal, slit,hollow, hexagonal)	-	0	-
Cl-5.1, 7.3, Table-2, 3 & 4 (ii)(Linear density (Denier))	-	0	-
Cl-5.1, 7.3, Table-2, 3 & 4 (iii)(No. of filaments (as declared))	-	0	-
Cl-5.1, 7.3, Table-2, 3 & 4 (iv)(Tenacity, gpd,)	-	0	-
Cl-5.1,7.3, Table-2, 3 & 4- (v)(Elongation at break, percent)	-	0	-
Cl-5.1,7.3, Table-2, 3 & 4 (vi)(Boiling water shrinkage, percent)	-	0	-
Cl-5.1,7.3, Table-2, 3 & 4 (vii)(Spin finish oil pick-up,percent,)	-	0	-
Cl-5.1,7.3, Table-2, 3. & 4 (viii)(Unevenness of linear density (normal), percent,)	-	0	-
Cl-5.1, 7.3, Table-2, 3 & 4 (ix)(Lustre, titanium dioxide content, percent,)	-	0	-
Cl-5.1, 7.3, Table-2, 3 & 4 (ix)(Full dull (FD))	-	0	-
Cl-5.1,7.3, Table-2, 3 & 4 (ix)(Semi dull (SD)/ SDOB)	-	0	-
Cl-5.1, 7.3, Table-2, 3 & 4 (ix)(Bright (BRT)/OBRT)	-	0	-
Cl-5.1,7.3, Table-2, 3 & 4 (x)(Moisture regain, percent, Max)	-	0	-
Cl-5.1,7.3, Table-2, 3 & 4 (xi)(Water soluble matter, percent, Max)	-	0	-
Cl-5.1, 7.3, Table-2, 3 & 4 (xii)(Limiting oxygen index, Min for fire retardant yarns only))	-	0	-
Cl-5.1,7.3, Table-2, 3 & 4 (xiii)(Ultraviolet resistance, UV Blamp, 144 h, percent retained strength, Min)	-	0	-
Cl-5.1, 7.3, Table-2, 3 & 4 (xiv)(Anti-microbial activity value, Min (for anti-microbial yarn only))	-	10000	-
Cl-5.1,7.3, Table-2, 3 & 4 (xv)(Colour strength with reference to standard yarn, percent)	-	0	-
Cl-5.1,7.3, Table-2, 3 & 4 (xvi)(Colour difference with reference to standard yarn, measured as ΔE, Max)	-	0	-
Cl-5.1,7.3 Table-2, 3 &4 (xvii)(Colour fastness to light (for dope dyed yarns only), Min)	-	0	-
Cl-5.2(Freedom from Yarn Defects)	-	0	-
Cl-5.3(Commercial Mass)	-	0	-
Cl-5.4, Table-5 (i)(Total free and releasable formaldehyde, mg/kg (ppm), Max)	-	0	-
Cl-5.4, Table-5 (ii) (a)(Mercury)	-	0	-
Cl-5.4, Table-5 (ii) (b)(Chromium III)	-	0	-
Cl-5.4, Table-5 (ii) (c)(Chromium VI)	-	0	-
Cl-5.4, Table-5 (ii) (d)(Lead)	-	0	-
Cl-5.4, Table-5 (ii) (e)(Cadmium)	-	0	-
Cl-5.4, Table-5 (ii) (f)(Copper)	-	0	-
Cl-5.4, Table-5 (ii) (g)(Antimony)	-	0	-
Cl-5.4, Table-5 (iii)(Pentachlorophenol, ppm, Max)	-	0	-
Cl-5.4, Table-5 (iv)(Pesticides, (sum parameter), ppm, Max)	-	0	-
Cl-5.4, Table-5 (v)(Banned Pesticides, ppm, Max)	-	0	-
Cl-5.4, Table-5 (vi)(Banned azo colourants (arylamines), ppm, Max (for dyed yarns only))	-	0	-
Cl-7(Marking)	-	0	-
Cl-5.1, Table-3 (vi)(Hot air shrinkage, percent (as declared))	-	0	-
Table-2 (Note-5)(Interlace in nips)	-	0	-
Table-4 (Note-2)(Interlace in nips)	-	0	-
Cl-4.1(Identification and Notation of Polyamide (Nylon 6) Yarns)	-	0	-
Cl-5.1, 7.3 Table-2, 3 & 4 (i)(Cross section, circular,triangular,trilobal, slit,hollow, hexagonal)	-	0	-
Cl-5.1, 7.3, Table-2, 3 & 4 (ii)(Linear density (Denier))	-	0	-
Cl-5.1, 7.3, Table-2, 3 & 4 (iii)(No. of filaments (as declared))	-	0	-
Cl-5.1, 7.3, Table-2, 3 & 4 (iv)(Tenacity, gpd,)	-	0	-
Cl-5.1,7.3, Table-2, 3 & 4- (v)(Elongation at break, percent)	-	0	-
Cl-5.1,7.3, Table-2, 3 & 4 (vi)(Boiling water shrinkage, percent)	-	0	-
Cl-5.1,7.3, Table-2, 3 & 4 (vii)(Spin finish oil pick-up,percent,)	-	0	-
Cl-5.1,7.3, Table-2, 3. & 4 (viii)(Unevenness of linear density (normal), percent,)	-	0	-
Cl-5.1, 7.3, Table-2, 3 & 4 (ix)(Lustre, titanium dioxide content, percent,)	-	0	-
Cl-5.1, 7.3, Table-2, 3 & 4 (ix)(Full dull (FD))	-	0	-
Cl-5.1,7.3, Table-2, 3 & 4 (ix)(Semi dull (SD)/ SDOB)	-	0	-
Cl-5.1, 7.3, Table-2, 3 & 4 (ix)(Bright (BRT)/OBRT)	-	0	-
Cl-5.1,7.3, Table-2, 3 & 4 (x)(Moisture regain, percent, Max)	-	0	-
Cl-5.1,7.3, Table-2, 3 & 4 (xi)(Water soluble matter, percent, Max)	-	0	-
Cl-5.1, 7.3, Table-2, 3 & 4 (xii)(Limiting oxygen index, Min for fire retardant yarns only))	-	0	-
Cl-5.1,7.3, Table-2, 3 & 4 (xiii)(Ultraviolet resistance, UV Blamp, 144 h, percent retained strength, Min)	-	0	-
Cl-5.1, 7.3, Table-2, 3 & 4 (xiv)(Anti-microbial activity value, Min (for anti-microbial yarn only))	-	0	-
Cl-5.1,7.3, Table-2, 3 & 4 (xv)(Colour strength with reference to standard yarn, percent)	-	0	-
Cl-5.1,7.3, Table-2, 3 & 4 (xvi)(Colour difference with reference to standard yarn, measured as ΔE, Max)	-	0	-
Cl-5.1,7.3 Table-2, 3 &4 (xvii)(Colour fastness to light (for dope dyed yarns only), Min)	-	0	-
Cl-5.2(Freedom from Yarn Defects)	-	0	-
Cl-5.3(Commercial Mass)	-	0	-
Cl-5.4, Table-5 (i)(Total free and releasable formaldehyde, mg/kg (ppm), Max)	-	0	-
Cl-5.4, Table-5 (ii) (a)(Mercury)	-	0	-
Cl-5.4, Table-5 (ii) (b)(Chromium III)	-	0	-
Cl-5.4, Table-5 (ii) (c)(Chromium VI)	-	0	-
Cl-5.4, Table-5 (ii) (d)(Lead)	-	0	-
Cl-5.4, Table-5 (ii) (e)(Cadmium)	-	0	-
Cl-5.4, Table-5 (ii) (f)(Copper)	-	0	-
Cl-5.4, Table-5 (ii) (g)(Antimony)	-	0	-
Cl-5.4, Table-5 (iii)(Pentachlorophenol, ppm, Max)	-	0	-
Cl-5.4, Table-5 (iv)(Pesticides, (sum parameter), ppm, Max)	-	0	-
Cl-5.4, Table-5 (v)(Banned Pesticides, ppm, Max)	-	0	-
Cl-5.4, Table-5 (vi)(Banned azo colourants (arylamines), ppm, Max (for dyed yarns only))	-	0	-
Cl-7(Marking)	-	0	-
Cl-5.1, Table-3 (vi)(Hot air shrinkage, percent (as declared))	-	0	-
Table-2 (Note-5)(Interlace in nips)	-	0	-
Table-4 (Note-2)(Interlace in nips)	-	0	-

08 May, 2028

-
Included w.e.f 21.05.2025

140

IS 17265 (2023)

Textiles 100 Percent Polyester Spun Grey and White Yarns Specification Second Revision

55800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.No. 4(CLASSIFICATIONS)	-	1000	-
Cl.No. 5.1, Table no. 1("Designation of Yarn ")	-	1000	-
Cl.No.5.2 , Table no. 2(IDENTIFICATION AND DESCRIPTION)	-	10000	-
Cl.No. 6.1,6.2,8.2. Table no. 3(i)(Mean linear density (Count))	-	1000	-
Cl.No. 6.1,6.2,8.2. Table no. 3(ii)(Twist per metre,)	-	1000	-
Cl.No. 6.1,6.2,8.2. Table no. 3(iii)(Average Single yarn tenacity)	-	1000	-
Cl.No. 6.1,6.2,8.2. Table no. 3(iv)(Elongation)	-	1000	-
Cl.No. 6.1,6.2,8.2. Table no. 3(v)(Average Count strength product (CSP))	-	1000	-
Cl.No. 6.1,6.2,8.2. Table no. 3(vi)(Yarn hairiness index)	-	1000	-
Cl.No. 6.1,6.2,8.2. Table no. 3(vii)(Whiteness index of polyester spun yarn)	-	1000	-
Cl.No. 6.1,6.2 Table no. 4(i)(Moisture regain)	-	1000	-
Cl.No. 6.1,6.2 Table no. 4(ii)(Isophthalic Acid (IPA) content)	-	1000	-
Cl.No. 6.1,6.2 Table no. 4(iii)(Water soluble matter)	-	1000	-
Cl.No. 6.1,6.2 Table no. 4(iv)(Phosphorus content)	-	1000	-
Cl.No. 6.1,6.2 Table no. 4(v)(Ultraviolet resistance)	-	1000	-
Cl.No. 6.1,6.2 Table no. 4(vi)(Anti-microbial activity value)	-	10000	-
Cl.No. 6.1,6.2 Table no. 4(vii)("Wettability of woven or knitted fabrics (about 150 gsm) made from the yarns")	-	1000	-
Cl.No. 6.1,6.2,8.2. Table no. 4(viii)("Wicking characteristic of woven or knitted fabrics (about 150 gsm) made from the yarn")	-	1000	-
Cl.No. 6.3(Freedom from Yarn Defects)	-	1000	-
Cl.No. 6.4, Table no. 5(Yarn Unevenness and Yarn Imperfections)	-	1000	-
Cl.No. 6.5,(Objectionable Faults)	-	1000	-
Cl.No. 6.6(Commercial Mass)	-	1000	-
Cl.No. 6.7, Table no. 7(i)("Light ")	-	1000	-
Cl.No. 6.7, Table no. 7(ii)(Washing)	-	1000	-
Cl.No. 6.7, Table no. 7(iii)(Rubbing)	-	1000	-
Cl.No. 6.7, Table no. 7(iv)(Perspiration)	-	1000	-
Cl.No. 6.8, Table no. 8(i)(Free and releasable formaldehyde)	-	1000	-
Cl.No. 6.8, Table no. 8(ii)("Extractable heavy metals by artificial Acidic sweat/saliva")	-	5000	-
Cl.No. 6.8, Table no. 8(iii)(Pentachlorophenol)	-	1000	-
Cl.No. 6.8, Table no. 8(iv)(Pesticides (Sum parameter))	-	5000	-
Cl.No. 6.8, Table no. 8(v)(Banned Pesticides)	-	5000	-
Cl.No. 6.8, Table no. 8(vi)(Banned azo colourants (arylamines))	-	5000	-
Cl.No.8(MARKING)	-	0	-
Cl- 6.2.3(Lea breaking strength of folded yarn)	-	1000	-
Cl-6.2.4(Ply twist)	-	1000	-
Cl.No. 4(CLASSIFICATIONS)	-	1000	-
Cl.No. 5.1, Table no. 1("Designation of Yarn ")	-	1000	-
Cl.No.5.2 , Table no. 2(IDENTIFICATION AND DESCRIPTION)	-	10000	-
Cl.No. 6.1,6.2,8.2. Table no. 3(i)(Mean linear density (Count))	-	1000	-
Cl.No. 6.1,6.2,8.2. Table no. 3(ii)(Twist per metre,)	-	1000	-
Cl.No. 6.1,6.2,8.2. Table no. 3(iii)(Average Single yarn tenacity)	-	1000	-
Cl.No. 6.1,6.2,8.2. Table no. 3(iv)(Elongation)	-	1000	-
Cl.No. 6.1,6.2,8.2. Table no. 3(v)(Average Count strength product (CSP))	-	1000	-
Cl.No. 6.1,6.2,8.2. Table no. 3(vi)(Yarn hairiness index)	-	1000	-
Cl.No. 6.1,6.2,8.2. Table no. 3(vii)(Whiteness index of polyester spun yarn)	-	1000	-
Cl.No. 6.1,6.2 Table no. 4(i)(Moisture regain)	-	1000	-
Cl.No. 6.1,6.2 Table no. 4(ii)(Isophthalic Acid (IPA) content)	-	1000	-
Cl.No. 6.1,6.2 Table no. 4(iii)(Water soluble matter)	-	1000	-
Cl.No. 6.1,6.2 Table no. 4(iv)(Phosphorus content)	-	1000	-
Cl.No. 6.1,6.2 Table no. 4(v)(Ultraviolet resistance)	-	1000	-
Cl.No. 6.1,6.2 Table no. 4(vi)(Anti-microbial activity value)	-	10000	-
Cl.No. 6.1,6.2 Table no. 4(vii)("Wettability of woven or knitted fabrics (about 150 gsm) made from the yarns")	-	1000	-
Cl.No. 6.1,6.2,8.2. Table no. 4(viii)("Wicking characteristic of woven or knitted fabrics (about 150 gsm) made from the yarn")	-	1000	-
Cl.No. 6.3(Freedom from Yarn Defects)	-	1000	-
Cl.No. 6.4, Table no. 5(Yarn Unevenness and Yarn Imperfections)	-	1000	-
Cl.No. 6.5,(Objectionable Faults)	-	1000	-
Cl.No. 6.6(Commercial Mass)	-	1000	-
Cl.No. 6.7, Table no. 7(i)("Light ")	-	1000	-
Cl.No. 6.7, Table no. 7(ii)(Washing)	-	1000	-
Cl.No. 6.7, Table no. 7(iii)(Rubbing)	-	1000	-
Cl.No. 6.7, Table no. 7(iv)(Perspiration)	-	1000	-
Cl.No. 6.8, Table no. 8(i)(Free and releasable formaldehyde)	-	1000	-
Cl.No. 6.8, Table no. 8(ii)("Extractable heavy metals by artificial Acidic sweat/saliva")	-	5000	-
Cl.No. 6.8, Table no. 8(iii)(Pentachlorophenol)	-	5000	-
Cl.No. 6.8, Table no. 8(iv)(Pesticides (Sum parameter))	-	5000	-
Cl.No. 6.8, Table no. 8(v)(Banned Pesticides)	-	5000	-
Cl.No. 6.8, Table no. 8(vi)(Banned azo colourants (arylamines))	-	5000	-
Cl.No.8(MARKING)	-	0	-
Cl- 6.2.3(Lea breaking strength of folded yarn)	-	1000	-
Cl-6.2.4(Ply twist)	-	1000	-
Cl.No. 4(CLASSIFICATIONS)	-	1000	-
Cl.No. 5.1, Table no. 1("Designation of Yarn ")	-	1000	-
Cl.No.5.2 , Table no. 2(IDENTIFICATION AND DESCRIPTION)	-	1000	-
Cl.No. 6.1,6.2,8.2. Table no. 3(i)(Mean linear density (Count))	-	1000	-
Cl.No. 6.1,6.2,8.2. Table no. 3(ii)(Twist per metre,)	-	1000	-
Cl.No. 6.1,6.2,8.2. Table no. 3(iii)(Average Single yarn tenacity)	-	1000	-
Cl.No. 6.1,6.2,8.2. Table no. 3(iv)(Elongation)	-	1000	-
Cl.No. 6.1,6.2,8.2. Table no. 3(v)(Average Count strength product (CSP))	-	1000	-
Cl.No. 6.1,6.2,8.2. Table no. 3(vi)(Yarn hairiness index)	-	1000	-
Cl.No. 6.1,6.2,8.2. Table no. 3(vii)(Whiteness index of polyester spun yarn)	-	1000	-
Cl.No. 6.1,6.2 Table no. 4(i)(Moisture regain)	-	1000	-
Cl.No. 6.1,6.2 Table no. 4(ii)(Isophthalic Acid (IPA) content)	-	1000	-
Cl.No. 6.1,6.2 Table no. 4(iii)(Water soluble matter)	-	1000	-
Cl.No. 6.1,6.2 Table no. 4(iv)(Phosphorus content)	-	1000	-
Cl.No. 6.1,6.2 Table no. 4(v)(Ultraviolet resistance)	-	1000	-
Cl.No. 6.1,6.2 Table no. 4(vi)(Anti-microbial activity value)	-	1000	-
Cl.No. 6.1,6.2 Table no. 4(vii)("Wettability of woven or knitted fabrics (about 150 gsm) made from the yarns")	-	1000	-
Cl.No. 6.1,6.2,8.2. Table no. 4(viii)("Wicking characteristic of woven or knitted fabrics (about 150 gsm) made from the yarn")	-	1000	-
Cl.No. 6.3(Freedom from Yarn Defects)	-	1000	-
Cl.No. 6.4, Table no. 5(Yarn Unevenness and Yarn Imperfections)	-	1000	-
Cl.No. 6.5,(Objectionable Faults)	-	1000	-
Cl.No. 6.6(Commercial Mass)	-	1000	-
Cl.No. 6.7, Table no. 7(i)("Light ")	-	1000	-
Cl.No. 6.7, Table no. 7(ii)(Washing)	-	1000	-
Cl.No. 6.7, Table no. 7(iii)(Rubbing)	-	1000	-
Cl.No. 6.7, Table no. 7(iv)(Perspiration)	-	1000	-
Cl.No. 6.8, Table no. 8(i)(Free and releasable formaldehyde)	-	1000	-
Cl.No. 6.8, Table no. 8(ii)("Extractable heavy metals by artificial Acidic sweat/saliva")	-	1000	-
Cl.No. 6.8, Table no. 8(iii)(Pentachlorophenol)	-	1000	-
Cl.No. 6.8, Table no. 8(iv)(Pesticides (Sum parameter))	-	1000	-
Cl.No. 6.8, Table no. 8(v)(Banned Pesticides)	-	1000	-
Cl.No. 6.8, Table no. 8(vi)(Banned azo colourants (arylamines))	-	1000	-
Cl.No.8(MARKING)	-	1000	-
Cl- 6.2.3(Lea breaking strength of folded yarn)	-	1000	-
Cl-6.2.4(Ply twist)	-	1000	-
Cl.No. 4(CLASSIFICATIONS)	-	1000	-
Cl.No. 5.1, Table no. 1("Designation of Yarn ")	-	1000	-
Cl.No.5.2 , Table no. 2(IDENTIFICATION AND DESCRIPTION)	-	1000	-
Cl.No. 6.1,6.2,8.2. Table no. 3(i)(Mean linear density (Count))	-	1000	-
Cl.No. 6.1,6.2,8.2. Table no. 3(ii)(Twist per metre,)	-	1000	-
Cl.No. 6.1,6.2,8.2. Table no. 3(iii)(Average Single yarn tenacity)	-	1000	-
Cl.No. 6.1,6.2,8.2. Table no. 3(iv)(Elongation)	-	1000	-
Cl.No. 6.1,6.2,8.2. Table no. 3(v)(Average Count strength product (CSP))	-	1000	-
Cl.No. 6.1,6.2,8.2. Table no. 3(vi)(Yarn hairiness index)	-	1000	-
Cl.No. 6.1,6.2,8.2. Table no. 3(vii)(Whiteness index of polyester spun yarn)	-	1000	-
Cl.No. 6.1,6.2 Table no. 4(i)(Moisture regain)	-	1000	-
Cl.No. 6.1,6.2 Table no. 4(ii)(Isophthalic Acid (IPA) content)	-	1000	-
Cl.No. 6.1,6.2 Table no. 4(iii)(Water soluble matter)	-	1000	-
Cl.No. 6.1,6.2 Table no. 4(iv)(Phosphorus content)	-	1000	-
Cl.No. 6.1,6.2 Table no. 4(v)(Ultraviolet resistance)	-	1000	-
Cl.No. 6.1,6.2 Table no. 4(vi)(Anti-microbial activity value)	-	10000	-
Cl.No. 6.1,6.2 Table no. 4(vii)("Wettability of woven or knitted fabrics (about 150 gsm) made from the yarns")	-	1000	-
Cl.No. 6.1,6.2,8.2. Table no. 4(viii)("Wicking characteristic of woven or knitted fabrics (about 150 gsm) made from the yarn")	-	1000	-
Cl.No. 6.3(Freedom from Yarn Defects)	-	1000	-
Cl.No. 6.4, Table no. 5(Yarn Unevenness and Yarn Imperfections)	-	1000	-
Cl.No. 6.5,(Objectionable Faults)	-	1000	-
Cl.No. 6.6(Commercial Mass)	-	1000	-
Cl.No. 6.7, Table no. 7(i)("Light ")	-	1000	-
Cl.No. 6.7, Table no. 7(ii)(Washing)	-	1000	-
Cl.No. 6.7, Table no. 7(iii)(Rubbing)	-	1000	-
Cl.No. 6.7, Table no. 7(iv)(Perspiration)	-	1000	-
Cl.No. 6.8, Table no. 8(i)(Free and releasable formaldehyde)	-	5000	-
Cl.No. 6.8, Table no. 8(ii)("Extractable heavy metals by artificial Acidic sweat/saliva")	-	5000	-
Cl.No. 6.8, Table no. 8(iii)(Pentachlorophenol)	-	5000	-
Cl.No. 6.8, Table no. 8(iv)(Pesticides (Sum parameter))	-	5000	-
Cl.No. 6.8, Table no. 8(v)(Banned Pesticides)	-	5000	-
Cl.No. 6.8, Table no. 8(vi)(Banned azo colourants (arylamines))	-	5000	-
Cl.No.8(MARKING)	-	0	-
Cl- 6.2.3(Lea breaking strength of folded yarn)	-	1000	-
Cl-6.2.4(Ply twist)	-	1000	-

08 May, 2028

-
Included w.e.f 21.05.2025

141

IS 5405 (2025)

Disposable Sanitary Napkin/Panty Liner/Maternity Pad/Period Panty - Specification ( Third Revision )

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Cover/Top sheet)	-	1000	-
3.2(Absorbent core)	-	1000	-
3.3(Barrier or bottom sheet)	-	1000	-
4.1(Types)	-	1000	-
4.2(shapes)	-	1000	-
5(Sizes)	-	1000	-
Cl. 5 Table-1(Type)	-	1000	-
Cl. 5 Table-1(Size class)	-	1000	-
Cl. 5 Table-1(Length (Absorbent core only))	-	1000	-
Cl. 5 Table-1(Width (Absorbent core only))	-	1000	-
6.1(Manufacture, workmanship and finish)	-	1000	-
6.2(Manufacture, workmanship and finish)	-	1000	-
7.1(pH Test)	-	1000	-
7.2("Ability to Withstand Pressure after Absorption: Liquid Absorption ml, Min")	-	1000	-
7.3.1(Bacterial and Fungal Bioburden)	-	2000	-
7.3.2(Staphylococcus aureus)	-	2000	-
Cl 7.5(Phthalate test- Combination)	-	5000	-
7.7(Anti bacterial activity value (Optional) (IS/ISO 20743))	-	10000	-
3.1(Cover/Top Sheet (non sterile gauze))	-	1000	-
3.1(Cover/Top Sheet (sterile gauze))	-	1000	-
5(Size)	-	1000	-
3.1(Cover/Top sheet)	-	1000	-
3.2(Absorbent core)	-	1000	-
3.3(Barrier or bottom sheet)	-	1000	-
4.1(Types)	-	1000	-
4.2(shapes)	-	1000	-
5(Sizes)	-	1000	-
Cl. 5 Table-1(Type)	-	1000	-
Cl. 5 Table-1(Size class)	-	1000	-
Cl. 5 Table-1(Length (Absorbent core only))	-	1000	-
Cl. 5 Table-1(Width (Absorbent core only))	-	1000	-
6.1(Manufacture, workmanship and finish)	-	1000	-
6.2(Manufacture, workmanship and finish)	-	1000	-
7.1(pH Test)	-	1000	-
7.2("Ability to Withstand Pressure after Absorption: Liquid Absorption ml, Min")	-	1000	-
7.3.1(Bacterial and Fungal Bioburden)	-	1000	-
7.3.2(Staphylococcus aureus)	-	1000	-
Cl 7.5(Phthalate test- Combination)	-	1000	-
7.7(Anti bacterial activity value (Optional) (IS/ISO 20743))	-	10000	-
3.1(Cover/Top Sheet (non sterile gauze))	-	1000	-
3.1(Cover/Top Sheet (sterile gauze))	-	1000	-
5(Size)	-	1000	-
3.1(Cover/Top sheet)	-	1000	-
3.2(Absorbent core)	-	1000	-
3.3(Barrier or bottom sheet)	-	1000	-
4.1(Types)	-	1000	-
4.2(shapes)	-	1000	-
5(Sizes)	-	1000	-
Cl. 5 Table-1(Type)	-	1000	-
Cl. 5 Table-1(Size class)	-	1000	-
Cl. 5 Table-1(Length (Absorbent core only))	-	1000	-
Cl. 5 Table-1(Width (Absorbent core only))	-	1000	-
6.1(Manufacture, workmanship and finish)	-	1000	-
6.2(Manufacture, workmanship and finish)	-	1000	-
7.1(pH Test)	-	1000	-
7.2("Ability to Withstand Pressure after Absorption: Liquid Absorption ml, Min")	-	1000	-
7.3.1(Bacterial and Fungal Bioburden)	-	2000	-
7.3.2(Staphylococcus aureus)	-	2000	-
Cl 7.5(Phthalate test- Combination)	-	5000	-
7.7(Anti bacterial activity value (Optional) (IS/ISO 20743))	-	10000	-
3.1(Cover/Top Sheet (non sterile gauze))	-	1000	-
3.1(Cover/Top Sheet (sterile gauze))	-	1000	-
5(Size)	-	1000	-
3.1(Cover/Top sheet)	-	1000	-
3.2(Absorbent core)	-	1000	-
3.3(Barrier or bottom sheet)	-	1000	-
4.1(Types)	-	1000	-
4.2(shapes)	-	1000	-
5(Sizes)	-	1000	-
Cl. 5 Table-1(Type)	-	1000	-
Cl. 5 Table-1(Size class)	-	1000	-
Cl. 5 Table-1(Length (Absorbent core only))	-	1000	-
Cl. 5 Table-1(Width (Absorbent core only))	-	1000	-
6.1(Manufacture, workmanship and finish)	-	1000	-
6.2(Manufacture, workmanship and finish)	-	1000	-
7.1(pH Test)	-	1000	-
7.2("Ability to Withstand Pressure after Absorption: Liquid Absorption ml, Min")	-	1000	-
7.3.1(Bacterial and Fungal Bioburden)	-	1000	-
7.3.2(Staphylococcus aureus)	-	1000	-
Cl 7.5(Phthalate test- Combination)	-	1000	-
7.7(Anti bacterial activity value (Optional) (IS/ISO 20743))	-	1000	-
3.1(Cover/Top Sheet (non sterile gauze))	-	1000	-
3.1(Cover/Top Sheet (sterile gauze))	-	1000	-
5(Size)	-	1000	-

08 May, 2028

-
Included w.e.f 21.05.2025 Exclusion: Cl 7.4 (Biocompatibility evaluation - Cytotoxicity ),Cl 7.4 (Biocompatibility evaluation - Irritation), Cl 7.4 (Biocompatibility evaluation - skin Sensitization), Cl 7.6 (Compostability (Optional)

142

IS 7867 (2022)

Textiles - Continuous Filament Polyamide (Nylon) Yarn - Specification (first revision)

55000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 3.1 Table 1(Denier, deviation, percent-(IS 7703-1))	-	55000	-
As per Clause 3.1 Table 1(Tenacity, g/tex (or g/d)-(IS 7703-2))	-	55000	-
As per Clause 3.1 Table 1(Percentage elongation at break, percent-(IS 7703-2))	-	55000	-
As per Clause 3.1 Table 1(Mean linear irregularity o revenness (U%)-(IS 7703-5))	-	55000	-
As per Clause 3.1 Table 1(Tolerance on commercial mass, percent-(IS 7703-3))	-	55000	-
As per Clause 3.1 Table 1(Conventional allowance percent-(IS 7867))	-	55000	-
As per Clause 3.1 Table 1(Oil content, percent-(IS 7867))	-	55000	-
As per Clause 3.1 Table 1(Broken filaments-(IS 7867-Visual))	-	55000	-
As per Clause 3.1 Table 1(Undrawn yarn-(IS 7867))	-	55000	-
As per Clause 3.1 Table 1(Boiling water shrinkage-(IS 17087))	-	55000	-
As per Clause 3.1 Table 1(Hot air shrinkage, percent-(IS 17088))	-	55000	-
As per Clause 5(Packing-(IS 7867))	-	55000	-
As per Clause 8(Sampling-(IS 7867))	-	55000	-
As per Clause 4(Marking-(IS 7867))	-	55000	-

08 May, 2028

-
-

143

IS 17509 (2021)

Disposable Baby Diaper Specification

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause no. 3(Material)	-	22000	-
Clause no. 3.1(Top Cover / Top Sheet)	-	500	-
Clause no. 3.2(Absorbent Core)	-	500	-
Clause no. 3.3(Outer Protective Barrier or Back Sheet)	-	500	-
Clause no. 4(Fastening & Securing Mechanism)	-	500	-
Clause no. 5(ManufactureWorkmanship and Finish)	-	500	-
Clause no.6(Type and Size: FOR X LARGE)	-	500	-
Clause no.6(Diaper Length)	-	500	-
Clause no.6(Diaper Width)	-	500	-
Clause no.6(Diaper Crotch)	-	500	-
Clause no.6(Absorbent Core Length)	-	500	-
Clause no.6(Absorbent Core Width Back)	-	500	-
1()	-	500	-
Clause no.6(Absorbent Core Length)	-	500	-
Clause no.6(Absorbent Core Width Front)	-	500	-
Clause no.6(Core Cortch)	-	500	-
Clause no.7(Performance Requirements)	-	500	-
Clause no.7.1(pH Value)	-	500	-
Clause no.7.2 Table-2(Minimum absorption Capacity (X Large))	-	1000	-
Clause no.7.2 Table-2(Rewet under Load (All Sizes))	-	1000	-
Clause no.7.2 Table-2(Rate of Absorption (All Sizes))	-	500	-
Clause no.7.3(Hygiene Testing Requirement, Total Viable Count)	-	4500	-
Clause no.7.3(Hygiene Testing Requirement, Staphylococcus Aureus)	-	2500	-
Clause no.7.4(Biocompatibility Evaluation- Cytotoxicity)	-	0	-
Clause no. 7.4(Biocompatibility Evaluation- Irritation)	-	0	-
Clause no.7.4(Biocompatibility Evaluation- Skin Sensitization)	-	0	-
Clause no.7.5(Phthalate Test)	-	5000	-
Clause no.7.6(Biodegradability and Compostability (optional))	-	0	-
Clause no.7.7(Anti-Bacterial Activity Value (optional))	-	5000	-
9 & 9.1(Marking)	-	0	-
10(Packing)	-	0	-
CL 7.3(Total Viable Count)	-	0	-
CL 7.3(Staphylococcus aureus)	-	2500	-
CL 7.4(Biocompatibility Evaluation - Cytotoxicity, Irritation and Skin Sensitization)	-	0	-
CL 7.6(Biodegradability and Compostability (Optional))	-	0	-
CL 7.7(Anti-Bacterial Activity Value (Optional))	-	5000	-

08 May, 2028

-
Exclusions -CL 7.4 (Biocompatibility Evaluation - Cytotoxicity, Irritation and Skin Sensitization), CL 7.6 (Biodegradability and Compostability (Optional))

144

IS 17262 (2022)

Textiles - Polyester partially oriented yarn (POY) - Specification (first revision)

45800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2(Identification and Description, Annex J of IS 16481 & IS 667)	-	7500	-
6.1 & 8.2 - Table -3, Sl no. 1(Nominal linear density, denier, IS 7703 (Part 1))	-	2500	-
6.1 & 8.2 - Table -3, Sl no. 2(Cross section)	-	2000	-
6.1 & 8.2 - Table -3, Sl no. 3(No. of filaments)	-	2000	-
6.1 & 8.2 - Table -3, Sl no. 4(Declared average tenacity, gpd, IS 7703 (Part 2))	-	2500	-
6.1 & 8.2 - Table -3, Sl no. 5(Declared elongation, percent, IS 7703 (Part 2))	-	2500	-
6.1 & 8.2 - Table -3, Sl no. 6(Interlace as nips per metre, Annex B)	-	2500	-
6.1 & 8.2 - Table -3, Sl no. 7(Unevenness of linear density, IS 7703 (Part 5))	-	10500	-
6.2- Table -4, Sl no. 1(Moisture regain, percent, Annex C)	-	2000	-
6.2- Table -4, Sl no. 2(Isophthalic acid (IPA) content in Virgin polyester yarn, Percent, Annex C of IS 16481)	-	2500	-
6.2- Table -4, Sl no. 2(Isophthalic acid (IPA) content in Dope dyed/white yarn, Percent, Annex C of IS 16482)	-	2500	-
6.2- Table -4, Sl no. 2(Isophthalic acid (IPA) content in Recycled polyester yarn, Percent, Annex C of IS 16483)	-	2500	-
6.2- Table -4, Sl no. 3(Water soluble matter, Percent, IS 3456)	-	2500	-
6.2- Table -4, Sl no. 4(Finish oil pick-up, percent, Annex D)	-	2500	-
6.2- Table -4, Sl no. 5(Phosphorus content, percent, Annex E)	-	2500	-
6.2- Table -4, Sl no. 6(Ultraviolet resistance, 500 h Percent retained strength, IS 13162 (Part 2))	-	50000	-
6.2- Table -4, Sl no. 7(Anti-microbial activity value, IS/ISO 20743)	-	35000	-
6.2- Table -4, Sl no. 8(Colour strength with reference to standard yarn, Percent, Annex F)	-	2500	-
6.2- Table -4, Sl no. 9(Colour difference with reference to standard yarn, measured as ΔE, Annex F)	-	2500	-
6.3(Freedom from Yarn Defects)	-	3500	-
6.4(Lustre/Brightness)	-	4500	-
6.5- Table -6, Sl no. 1(Light, Change in colour, IS/ISO 105-B01 or IS/ISO 105-B02)	-	7500	-
6.5- Table -6, Sl no. 2(Washing,IS/ISO 105-C10)	-	3500	-
6.5- Table -6, Sl no. 3(Rubbing, IS/ISO 105-X12)	-	3500	-
6.5- Table -6, Sl no. 4(Perspiration (acidic and alkaline), IS/ISO 105-E04)	-	3500	-
6.7- Table -7, Sl no. 1("Free and releasable formaldehyde, mg/kg (ppm),IS 14563 (Part 1) and IS 14563 (Part 2)")	-	9500	-
6.7- Table -7, Sl no. 2(Extractable heavy metals by artificial Acidic sweat/saliva, ppm, Annex A of IS 15651)	-	1000	-
6.7- Table -7, Sl no. 2(Mercury,ppm,Annex A of IS 15651)	-	1000	-
6.7- Table -7, Sl no. 2(Chromium III,ppm,Annex A of IS 15651)	-	1000	-
6.7- Table -7, Sl no. 2(Chromium VI,ppm,Annex A of IS 15651)	-	1000	-
6.7- Table -7, Sl no. 2(Lead,ppm,Annex A of IS 15651)	-	1000	-
6.7- Table -7, Sl no. 2(Cadmium,ppm,Annex A of IS 15651)	-	1000	-
6.7- Table -7, Sl no. 2(Copper,ppm,Annex A of IS 15651)	-	1000	-
6.7- Table -7, Sl no. 2(Antimony,ppm,Annex A of IS 15651)	-	1000	-
6.7- Table -7, Sl no. 3(Pentachlorophenol, ppm, Annex B of IS 15651)	-	1000	-
6.7- Table -7, Sl no. 4(Pesticides (Sum parameter), ppm, Annex D of IS 15651)	-	1000	-
6.7- Table -7, Sl no. 5(Banned Pesticides, ppm, Annex D of IS 15651)	-	1000	-
6.7- Table -7, Sl no. 6("Banned azo colourants (arylamines), mg/kg (ppm), IS 15570")	-	1000	-
6.1 & 8.2 - Table -3, Sl no. 7 (a)(All deniers except microdeniers)	-	1000	-
6.1 & 8.2 - Table -3, Sl no. 7 (b)(Microdeniers)	-	1000	-
6.1 & 8.2 - Table -3, Sl no. 7 ©(Dope dyed (all deniers))	-	1000	-
6.3(Freedom from Yarn Defects)	-	1000	-
6.4(Lustre/Brightness)	-	1000	-
6.5(Colour Fastness Properties of Dyed POY)	-	1000	-
6.1 Table -3, Sl no. 1(Nominal linear density, denier, IS 7703 (Part 1))	-	1000	-
6.1 Table -3, Sl no. 2(Cross section)	-	1000	-
6.1 & 8.2 - Table -3, Sl no. 1(Nominal linear density, denier, IS 7703 (Part 1))	-	1000	-
6.1 & 8.2 - Table -3, Sl no. 2(Cross section)	-	1000	-
6.1 & 8.2 - Table -3, Sl no. 2(Cross section)	-	1000	-
6.1 & 8.2 - Table -3, Sl no. 3(No. of filaments)	-	1000	-
6.1 & 8.2 - Table -3, Sl no. 4(Declared average tenacity, gpd, IS 7703 (Part 2))	-	1000	-
6.1 & 8.2 - Table -3, Sl no. 5(Declared elongation, percent, IS 7703 (Part 2))	-	1000	-
6.1 & 8.2 - Table -3, Sl no. 6(Interlace as nips per metre, Annex B)	-	1000	-
6.5- Table -6, Sl no. 2 (a)(Washing, Change in colour IS/ISO 105-C10)	-	1000	-
6.5- Table -6, Sl no. 2 (b)(Washing, Staining IS/ISO 105-C11)	-	1000	-
6.5- Table -6, Sl no. 3 (a)(Rubbing, Dry IS/ISO 105-X12)	-	1000	-
6.5- Table -6, Sl no. 3 (b)(Rubbing, Wet IS/ISO 105-X13)	-	1000	-
6.5- Table -6, Sl no. 4 (a)(Perspiration (acidic and alkaline), chenge in colour IS/ISO 105-E04)	-	1000	-
6.5- Table -6, Sl no. 4 (b)(Perspiration (acidic and alkaline), staining IS/ISO 105-E05)	-	1000	-
6.6(Commercial mass)	-	1000	-
6.4 Table 5(Colour Fastness to Light)	-	1000	-
6.1 Table 4(Water soluble matter %)	-	1000	-
6.2 Table 4(Finish Oil Pickup, %)	-	1000	-
6.2 Table 4(Colour difference with reference to srtandard yarn, measured as DE)	-	1000	-
6.5 Table 6(Colour Fastness to light)	-	1000	-
6.5 Table 6(Colour Fastness to Rubbing)	-	1000	-
6.5 Table 6(Colour Fastness to perspiration)	-	1000	-
6.5 Table 6(Colour Fastness to perspiration)	-	1000	-
6.1 Table 3(Colour Fastness to washing , test 2)	-	1000	-
6.1 Table 3(Nominal Linear Density,denier)	-	1000	-
6.1 Table 3(Cross Section)	-	1000	-
6.1 Table 3(No of Filaments)	-	1000	-
6.1 Table 3(Average Tenacity,gpd)	-	1000	-
6.1 Table 3(Elongation ,Percent,Average)	-	1000	-
6.1 Table 3(Interlace as nips per meter)	-	1000	-
6.1 Table 3(Unevenness ,U Percent)	-	1000	-

08 May, 2028

-
-

145

IS 17266 (2019)

Textiles – Viscose staple fibres – Specification

46500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.5(Commercial Mass)	-	46500	-
3.1(Oil Pickup Unit)	-	46500	-
3.2(Abnormal Fibre and Other Matters)	-	46500	-
4/4.1 Table 1.( REQUIREMENTS)	-	46500	-
4.3(Freedom from Defects)	-	46500	-
4.3.1( Dirt/Grease)	-	46500	-
4.3.2 (Damaged/Bumped Fibres)	-	46500	-
4.3.3(Finish Oil Contamination)	-	46500	-
4.3.4(Texture Colour/Appearance)	-	46500	-
4.3.5(Fluorescent Oil)	-	46500	-
4.3.6(Slubs/Loops/Kinks)	-	46500	-
4.3.7(None)	-	46500	-
Table -2 4.2(Additional Requirements for ECO-Mark (Optional))	-	46500	-
4.5(Commercial Mass)	-	46500	-
3.1(Oil Pickup Unit)	-	46500	-
3.2(Abnormal Fibre and Other Matters)	-	46500	-
4/4.1 Table 1.( REQUIREMENTS)	-	46500	-
4.3(Freedom from Defects)	-	46500	-
4.3.1( Dirt/Grease)	-	46500	-
4.3.2 (Damaged/Bumped Fibres)	-	46500	-
4.3.3(Finish Oil Contamination)	-	46500	-
4.3.4(Texture Colour/Appearance)	-	46500	-
4.3.5(Fluorescent Oil)	-	46500	-
4.3.6(Slubs/Loops/Kinks)	-	46500	-
4.3.7(None)	-	46500	-
Table -2 4.2(Additional Requirements for ECO-Mark (Optional))	-	46500	-
4.5(Commercial Mass)	-	46500	-
3.1(Oil Pickup Unit)	-	46500	-
3.2(Abnormal Fibre and Other Matters)	-	46500	-
4/4.1 Table 1.( REQUIREMENTS)	-	46500	-
4.3(Freedom from Defects)	-	46500	-
4.3.1( Dirt/Grease)	-	46500	-
4.3.2 (Damaged/Bumped Fibres)	-	46500	-
4.3.3(Finish Oil Contamination)	-	46500	-
4.3.4(Texture Colour/Appearance)	-	46500	-
4.3.5(Fluorescent Oil)	-	46500	-
4.3.6(Slubs/Loops/Kinks)	-	46500	-
4.3.7(None)	-	46500	-
Table -2 4.2(Additional Requirements for ECO-Mark (Optional))	-	46500	-
4.5(Commercial Mass)	-	46500	-
3.1(Oil Pickup Unit)	-	46500	-
3.2(Abnormal Fibre and Other Matters)	-	46500	-
4/4.1 Table 1.( REQUIREMENTS)	-	46500	-
4.3(Freedom from Defects)	-	46500	-
4.3.1( Dirt/Grease)	-	46500	-
4.3.2 (Damaged/Bumped Fibres)	-	46500	-
4.3.3(Finish Oil Contamination)	-	46500	-
4.3.4(Texture Colour/Appearance)	-	46500	-
4.3.5(Fluorescent Oil)	-	46500	-
4.3.6(Slubs/Loops/Kinks)	-	46500	-
4.3.7(None)	-	46500	-
Table -2 4.2(Additional Requirements for ECO-Mark (Optional))	-	46500	-
4.5(Commercial Mass)	-	46500	-
3.1(Oil Pickup Unit)	-	46500	-
3.2(Abnormal Fibre and Other Matters)	-	46500	-
4/4.1 Table 1.( REQUIREMENTS)	-	46500	-
4.3(Freedom from Defects)	-	46500	-
4.3.1( Dirt/Grease)	-	46500	-
4.3.2 (Damaged/Bumped Fibres)	-	46500	-
4.3.3(Finish Oil Contamination)	-	46500	-
4.3.4(Texture Colour/Appearance)	-	46500	-
4.3.5(Fluorescent Oil)	-	46500	-
4.3.6(Slubs/Loops/Kinks)	-	46500	-
4.3.7()	-	46500	-
Table -2 4.2(Additional Requirements for ECO-Mark (Optional))	-	46500	-
Cl-4.2, Table-1 (i)(Denier (1.2), Max)	-	46500	-
Cl-4.2, Table-1 (ii)(Conditional tenacity, gpd Min)	-	46500	-
Cl-4.2, Table-1 (iii)(Whiteness (berger), percent, Min)	-	46500	-
Cl-4.2, Table-1 (iv)(Length, mm)	-	46500	-
Cl-4.2, Table-1 (vi)(Spinning faults, (> 19 mm) Max)	-	46500	-
Cl-4.2, Table-1 (vi)(Shirley faults, mg/kg, Max)	-	46500	-
Cl-4.2, Table-1 (vii)(Moisture, percent)	-	46500	-
Cl-4.2, Table-1 (viii)(Oil pickup, percent)	-	46500	-
Cl-4.2, Table-1 (ix)(pH)	-	46500	-
Cl-4.4, Table-2 (i)(Free and releasable formaldehyde, mg/kg (ppm), Max)	-	46500	-
Cl-4.4, Table-2 (ii)(Extractable artificial sweat/saliva, heavy metals, mercury, ppm, Max)	-	46500	-
Cl-4.4, Table-2 (iii)(Chromium III, ppm, Max)	-	46500	-
Cl-4.4, Table-2 (iv)(Chromium VI, ppm, Max)	-	46500	-
Cl-4.4, Table-2 (v)(Sum parameters (as lead), ppm, Max)	-	46500	-
Cl-4.4, Table-2 (vi)(Pentachlorophenol, ppm, Max)	-	46500	-
Cl-4.4, Table-2 (vii)(Volatile hydrocarbons, ppm, Max (Non-halogens))	-	46500	-
Cl-4.4, Table-2 (viii)(Volatile halogenated organics, ppm, Max)	-	46500	-
Cl-4.4, Table-2 (ix)(Pesticides (sum parameter))	-	46500	-
Cl-4.4, Table-2 (x)(Banned pesticides)	-	46500	-
Cl-4.4, Table-2 (xi)(Coupled amines released from azo dyes (sum parameters))	-	46500	-

08 May, 2028

-
-

146

IS 17264 (2022)

Textiles - Polyester industrial yarn - Specification (first revision)

46500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Designation of Yarn (IS 17264))	-	7500	-
1(Microscopic and dissolution (IS 667))	-	40000	-
5.2.1 a(melting point)	-	2500	-
5.2.1 b(Staining Test (IS 667))	-	3500	-
5.2.2 & Table-1(Classification (IS 17264))	-	1500	-
5.2.2 & Table-1(Identification)	-	40000	-
6.3(Freedom from defects (IS 17264))	-	3500	-
6.1 & Table-3(Linear Density (IS 7703 Part-1))	-	2500	-
6.1 & Table-3(Tenacity (IS 7703 Part-2))	-	2500	-
6.1 & Table-3(Elongation (IS 7703 Part-2))	-	2500	-
6.1 & Table-3(Hot Air Shrinkage (IS 17264))	-	2500	-
6.2 & Table-4(Moisture regain (IS 17264))	-	2000	-
6.2 & Table-4(Isophthalic acid (IPA) content (IS 16481))	-	2500	-
6.2 & Table-4(Water soluble matter (IS 3456))	-	2500	-
6.2 & Table-4(Finish oil pick-up (IS 17264))	-	2500	-
6.2 & Table-4(Phosphorus content (IS 17264))	-	2500	-
6.2 & Table-4(Ultraviolet resistance (IS 13162 Part-2))	-	40000	-
6.2 & Table-4(Colour strength with reference to standard yarn (IS 17264))	-	2500	-
6.2 & Table-4(Colour difference with reference to standard yarn, measured as ΔE (IS 17264))	-	2500	-
6.4 & Table-5(Colour Fastness Rating to light (IS/ISO 105-B01))	-	7500	-
6.4 & Table-5(Colour Fastness Rating to Rubbing (IS/ISO 105-X12))	-	3500	-
8(Marking (IS 17264))	-	0	-
6.6 & Table-6(Free and releasable formaldehyde (IS 14563 Part-1 & 2))	-	9500	-
6.6 & Table-6(Mercury (IS 15651))	-	0	-
6.6 & Table-6(Chromium III (IS 15651))	-	0	-
6.6 & Table-6(Chromium VI (IS 15651))	-	0	-
6.6 & Table-6(Lead (IS 15651))	-	0	-
6.6 & Table-6(Cadmium (IS 15651))	-	0	-
6.6 & Table-6(Copper (IS 15651))	-	0	-
6.6 & Table-6(Antimony (IS 15651))	-	0	-
6.6 & Table-6(Pesticides (sum parameter) (IS 15651))	-	0	-
6.6 & Table-6(Banned pesticides (IS 15651))	-	0	-
6.6 & Table-6(Banned azo colourants (arylamines) (IS 15570))	-	0	-
5.2(Identification and Description, Annex J of IS 16481 & IS 667)	-	40000	-
6.4- Table -5, Sl no. 2 (a)(Rubbing, Dry IS/ISO 105-X12)	-	3500	-
6.4- Table -5, Sl no. 2 (b)(Rubbing, Wet IS/ISO 105-X13)	-	3500	-
6.5(Commercial mass)	-	2500	-
6.2 Table 4(Finish Oil Pickup)	-	2500	-
6.2 Table 4(Phosporus content)	-	2500	-
6.2 Table 4(Colour strength with reference to std yarn %)	-	2500	-
6.4 Table 5(Colour Fastness to Rubbing)	-	3500	-
6.1 Table 3(Linear Density, Denier (dtex))	-	2500	-
6.1 Table 3(Tenacity,gpd (cN/dtex))	-	2500	-
6.1 Table 3(Elongation %)	-	2500	-
6.1 Table 3(Hot Air Shrinkage %)	-	2500	-
6.6 & Table-6(Pentachlorophenol (IS 15651))	-	0	-

08 May, 2028

-
-

147

IS 17263 (2022)

Textiles - Polyester staples fibres - Specification (first revision)

45800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Classification (IS 17263))	-	1500	-
5(Identification (IS 17263))	-	40000	-
6 & Table-3(Mean Linear Density (IS 234))	-	2500	-
6 & Table-3(Cut Length (IS 10014 Part-1))	-	2500	-
6 & Table-3(Average Elongation at Break (IS 235))	-	2500	-
6 & Table-3(Average Tenacity (IS 235))	-	2500	-
6 & Table-3(Hollowness (IS 17263))	-	2500	-
6 & Table-3(Crimp Reoval (For filing nonwoven Fiber Only) (IS 17263))	-	2500	-
6 & Table-3(Sinking Time (For spun lace fiber only)(IS 17263))	-	2500	-
6 & Table-4(Moisture Regain (IS 17263))	-	2500	-
6 & Table-4(Isophthalic Acid (IS 16481))	-	2500	-
6 & Table-4(Phosphorus Content (IS 17263))	-	2500	-
6 & Table-4(Ultraviolet Resistence (IS 13162 Part-2))	-	45000	-
6 & Table-4(Water Soluble Matter (IS 3456))	-	2500	-
6 & Table-4(Anti Microbial activity Value (IS/ISO 20743))	-	35000	-
6 & Table-4(Silicon Content (IS 17263))	-	2500	-
6 & Table-4(Colour strength with reference to standard shade (IS 17263))	-	2500	-
6 & Table-4(Colour difference with reference to standard shade (IS 17263))	-	2500	-
6 & Table-4(L Colour Value (IS 17263))	-	2500	-
6 & Table-4(Whiteness Index (IS 17263))	-	2500	-
6 & Table-4(Resistance to ageing (fibres in sheet form at 40ºC for 168 h) (IS 7016Part-8))	-	45000	-
6 & Table-4(Dry heat (hot air) shrinkage at 180ºC, for 30 min (IS 17263))	-	2500	-
Cl-6.5(Commercial Mass (IS 7703 Part-3))	-	2000	-
6.4 & Table 6(Colour Fastness to Light (IS/ISO 105-B01))	-	7500	-
6.4 & Table 6(Colour Fastness to Washing (IS/ISO 105-C10))	-	3500	-
6.4 & Table 6(Colour Fastness to Rubbing (IS/ISO 105-X12))	-	3500	-
6.4 & Table 6("Colour Fastness to Perspiration (acidic and alkaline) (IS/ISO 105-E04)")	-	3500	-
6.6 & Table-7(Free and releasable formaldehyde,)	-	9500	-
6.6 & Table-7(Extractable heavy metals by artificial Acidic sweat/saliva (IS 15651))	-	3500	-
6.6 & Table-7(Mercury (IS 15651))	-	0	-
6.6 & Table-7(b) Chromium III (IS 15651))	-	0	-
6.6 & Table-7(c) Chromium VI (IS 15651))	-	0	-
6.6 & Table-7(d) Lead (IS 15651))	-	0	-
6.6 & Table-7(e) Cadmium (IS 15651))	-	0	-
6.6 & Table-7(f) Copper (IS 15651))	-	0	-
6.6 & Table-7(g) Antimony (IS 15651))	-	0	-
6.6 & Table-7(Pentachlorophenol (IS 15651))	-	0	-
6.6 & Table-7(Pesticides (Sum parameter) (IS 15651))	-	0	-
6.6 & Table-7(Banned pesticides (IS 15651))	-	0	-
6.6 & Table-7(Banned azo colourants (arylamines) (IS 15570))	-	0	-
8(Marking (IS 17263))	-	0	-
6.2(Freedom from Major Defects)	-	3500	-
6.3(Lustre/Brightness)	-	4500	-
6.4- Table -6, Sl no. 2 (a)(Washing, Change in colour IS/ISO 105-C10)	-	3500	-
6.4- Table -6, Sl no. 2 (b)(Washing, Staining IS/ISO 105-C11)	-	3500	-
6.4- Table -6, Sl no. 3 (a)(Rubbing, Dry IS/ISO 105-X12)	-	3500	-
6.4- Table -6, Sl no. 3 (b)(Rubbing, Wet IS/ISO 105-X13)	-	3500	-
6.4- Table -6, Sl no. 4 (a)(Perspiration (acidic and alkaline), chenge in colour IS/ISO 105-E04)	-	3500	-
6.4- Table -6, Sl no. 4 (b)(Perspiration (acidic and alkaline), staining IS/ISO 105-E05)	-	3500	-
6.1 Table 4(Moisture regain % Max at equilibrium condition)	-	2000	-
6.2 Table 4(Colour Strength with reference to standard yarn, %)	-	2500	-
6.1 Table 4(Phosphorus content)	-	2500	-
6.1 Table 4(Water soluble matter %)	-	2500	-
6.1 Table 4(Colour strength with reference to std shade %)	-	2500	-
6.1 Table 4(Colour difference with ref to std shade measured asDE)	-	2500	-
6.1 Table 4(L colour value %)	-	2500	-
6.1 Table 3(Sinking time, s)	-	2500	-
6.1 Table 4(Whiteness index)	-	2500	-
6.4 Table 6(Colour Fastness to light)	-	7500	-
6.4 Table 6(Colour Fastness to washing , test 2)	-	3500	-
6.4 Table 6(Colour Fastness to Rubbing)	-	3500	-
6.4 Table 6(Colour Fastness to perspiration)	-	3500	-
6.1 Table 3(Mean Linear Density ,Denier)	-	2500	-
6.1 Table 3(Cut Length)	-	2500	-
6.1 Table 3(Average elongation at break, %)	-	2500	-
6.1 Table 3(Average tenacity,gpd)	-	2500	-
6.1 Table 3(Hollowness, %)	-	2500	-
6.1 Table 3(Crimp removal %)	-	2500	-
6.1 Table 3(Sinking time,s)	-	2500	-

08 May, 2028

-
-

148

IS 17261 (2022)

Textiles - Polyester continuous filament fully drawn yarns - Specification (first revision)

46500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Classification (IS 17261))	-	1500	-
5(Designation ( IS 17261))	-	7500	-
6.1 & Table-3(Linear Density)	-	2500	-
6.1 & Table-3(Uneveness U)	-	10500	-
6.1 & Table-3(Tenacity)	-	2500	-
6.1 & Table-3(Elongation)	-	2500	-
6.2 & Table-4(Moisture regain ( IS17261))	-	2000	-
6.2 & Table-4(Isophthalic acid (IPA) content (IS 16481))	-	2500	-
6.2 & Table-4(Water soluble matter (IS 3456))	-	2500	-
6.2 & Table-4(Finish oil pick-up ( IS17261))	-	2500	-
6.2 & Table-4(Phosphorus content ( IS17261))	-	2500	-
6.2 & Table-4(Ultraviolet resistance (IS 13162 (Part-2))	-	50000	-
6.2 & Table-4(Ultraviolet resistance (IS 13162 (Part-2))	-	50000	-
6.2 & Table-4(Anti-microbial activity value (IS/ISO 20743))	-	35000	-
6.2 & Table-4(Colour strength with reference to standard yarn ( IS17261))	-	2500	-
6.2 & Table-4(Colour difference with reference to standard yarn, measured as ΔE ( IS17261))	-	2500	-
6.3(Freedom From Defects)	-	3500	-
6.4 & Table-5(Lustre/Brightness TiO2 Content)	-	4500	-
6.5 & Table-6(Colour Fastness Rating To Light Change in colour)	-	7500	-
6.5 & Table-7(Colour Fastness Rating To Washing Change in colour)	-	3500	-
6.5 & Table-8(Colour Fastness Rating To Washing Staining)	-	3500	-
6.5 & Table-9(Colour Fastness Rating To Rubbing Dry)	-	3500	-
6.5 & Table-10(Colour Fastness Rating To Rubbing Wet)	-	3500	-
6.5 & Table-11(Colour Fastness Rating To Perspiration (acidic and alkaline) Change in colour)	-	3500	-
6.5 & Table-12(Colour Fastness Rating To Perspiration (acidic and alkaline) Staining)	-	3500	-
6.7 & table-7(Free and releasable formaldehyde)	-	9500	-
6.7 & table-7(Mercury (IS 15651))	-	0	-
6.7 & table-7(Chromium III (IS 15651))	-	0	-
6.7 & table-7(Chromium VI (IS 15651))	-	0	-
6.7 & table-7(Lead (IS 15651))	-	0	-
6.7 & table-7(Cadmium (IS 15651))	-	0	-
6.7 & table-7(Copper (IS 15651))	-	0	-
6.7 & table-7(Antimony (IS 15651))	-	0	-
6.7 & table-7(Pentachlorophenol (IS 15651))	-	0	-
6.7 & table-7(Pesticides (IS 15651))	-	0	-
6.7 & table-7(Banned Pesticides (IS 15651))	-	0	-
6.7 & table-7(Banned azo colourants (arylamines) (IS 15570))	-	0	-
8(Marking (IS 17261))	-	0	-
6.7 & Table 7(Colour Fastness Rating To Light Change in colour (IS/ISO 105-B01 or IS/ISO 105-B02))	-	3500	-
5.2(Identification and Description, Annex J of IS 16481 & IS 667)	-	40000	-
6.1 Table -3(Boiling water shrinkage, IS 17087)	-	2500	-
6.1 Table -3(Interlace as nips per metre, Annex B of IS 17262)	-	2500	-
6.1 Table -3(No. of filaments in multifilament yarn)	-	2500	-
6.2- Table -4, Sl no. 2 (a)(Isophthalic acid (IPA) content in Virgin polyester yarn, Percent, Annex C of IS 16481)	-	2500	-
6.2- Table -4, Sl no. 2 (b)(Isophthalic acid (IPA) content in Dope dyed/white yarn, Percent, Annex C of IS 16482)	-	2500	-
6.2- Table -4, Sl no. 2 (c)(Isophthalic acid (IPA) content in Recycled polyester yarn, Percent, Annex C of IS 16483)	-	2500	-
6.6(Commercial Mass, IS 7703)	-	0	-
6.5 Table 6(Colour Fastness to Light)	-	7500	-
6.5 Table 6(Colour Fatness to Washing, Test 2)	-	3500	-
6.5 Table 6(Colour Fastness to Rubbing)	-	3500	-
6.5 Table 6(Colour Fastness to perspiration)	-	3500	-
6.2 Table 4(Moisture Regain , %)	-	2000	-
6.2 Table 4(Water soluble matter %)	-	2500	-
6.2 Table 4(Finish oil pickup, %)	-	2500	-
6.2 Table 4(Phosphorus content , %)	-	2500	-
6.2 Table 4(Phosphorus content , %)	-	2500	-
6.2 Table 4(Colour strength with refernce to standard yarn, %)	-	2500	-
6.2 Table 4(Colour difference with referece standard yarn, measure as DE)	-	2500	-
6.1 Table 3(Linear Density ,Denier (dtex))	-	2500	-
6.1 Table 3(Unevenness ,(U %))	-	2500	-
6.1 Table 3(Tenacity,gpd (cN/dtex))	-	2500	-
6.1 Table 3(Elongation %)	-	2500	-
6.1 Table 3(Boiling Water Shrinkage %)	-	2500	-

08 May, 2028

-
-

Bureau of Indian Standards

The National Standards Body of India

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

198-199, MIE, Industrial Area, Phase-1, Bahadurgarh, Haryana, Bahadurgarh, Jhajjar, Haryana, 124507

9818233966 info@alphatesthouse.com

Scope List