BIS - LIMS (Laboratory Information Management System)

Ace Test Labs & Metrology Pvt. Ltd., Sonipat

PLOT NO. 68, HSIIDC, INDUSTRIAL ESTATE,RAI, SONIPAT, Sonipat, Haryana, 131029

8816921177 info@acetestgroup.com

Scope List

Reset

99 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 11188 : Part 1 (2021)

Vault Strong Room doors Part 1 specification

298000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.1 (3)(Fire and stream hose IS 11188 (Part 3))	-	15000	-
11.1 (2)(Fire endurance IS 11188 (Part 3))	-	150000	-
11.1 (1)(Burglary resistance IS 11188 (Part 2))	-	150000	-
10.4(Alternate to Cl 10.4)	-	15000	-
10.3(Cross Hatch Test)	-	15000	-
10(FINISH)	-	15000	-
9.4(Vault Lighting Control)	-	15000	-
9.3(Foot Bridge)	-	15000	-
9.2(Handles)	-	15000	-
9.1.1(Adjusting Bolt)	-	15000	-
9.1(Hinges)	-	15000	-
9(DOOR FITTINGS)	-	15000	-
8.4.5(Automatic Relocking Device)	-	15000	-
8.4.4(Time Lock)	-	15000	-
8.4(Lock)	-	15000	-
8.3.2.2(Construction)	-	15000	-
8.3.2.1(The number of bolts and their minimum dimension)	-	15000	-
8.3.2(Bolt Work)	-	15000	-
8.3.1(Lock Case)	-	15000	-
8.3(Locking Mechanism)	-	15000	-
8.2.3(Crane Hinge Mechanism)	-	15000	-
8.2.2(Compression Mechanism)	-	15000	-
8.2.1(Rebate of the Door Frame)	-	15000	-
8.2(Doors Frame)	-	15000	-
8.1.2(Main Door (Outside))	-	15000	-
8.1.1(Ventilating Grill Gate (Inside))	-	15000	-
8.1 Fig. 1(Doors)	-	15000	-
8(CONSTRUCTION AND GENERALREQUIREMENTS)	-	15000	-
5 Table 1(bolts, Min)	-	15000	-
5 Table 1(xix) Depth of engagement of shooting)	-	15000	-
5 Table 1(cross sectional area, Min,sq mm)	-	15000	-
5 Table 1(xviii) Diameter of shooting bolts, Min)	-	15000	-
5 Table 1(xvi) Number of shooting bolts at top,Min)	-	15000	-
5 Table 1(xv) Number of shooting bolts on opposite side,Min)	-	15000	-
5 Table 1(xiv) Number of shooting bolts on hinge side, Min)	-	15000	-
5 Table 1(xiii) Number of locks)	-	15000	-
5 Table 1(xii) Wall thickness (recommendation))	-	15000	-
5 Table 1(xi) Thickness of drill and oxyacetylene torch resisting layer (excluding mild steel plates),Min)	-	15000	-
5 Table 1(ix) Thickness of doors slab, thickness over rebate)	-	15000	-
5 Table 1(viii) Pitch of grill gate rods)	-	15000	-
5 Table 1(vii) Diameter of grill gate rods, Min)	-	15000	-
5 Table 1(vi) Thickens of grill gate angles or section made out of M.S. plates, Min)	-	15000	-
5 Table 1(v) Dimension of the rebate coming under shear)	-	15000	-
5 Table 1(iv (b) Thickness of door frame, if fabricated from single plate to form channel/multi-bend section, Min)	-	15000	-
5 Table 1(ii (a) Height H, Min b) Width W, Min iv(a) Thickness of door frame angle, channel or section made out of M.S. plates, if built up to form a channel,Min)	-	15000	-
5 Table 1(iii) Inside dimension or clear opening when door shutters are swung open at 180 degree)	-	15000	-
5 Table 1(ii (b) Width W)	-	15000	-
5 Table 1(ii (a) Height, H)	-	15000	-
5 Table 1(ii) Overall dimension of vault door)	-	15000	-
5 Table 1(i) Door Type)	-	15000	-
4(Type)	-	15000	-
5(Table-1)(Type of Door)	-	15000	-
5(Table-1)(Overall dimesion of door)	-	15000	-
5(Table-1)(Inside dimension or clear opening of door)	-	15000	-
5(Table-1)(Thickness of door frame angle-made of Plate,if bulit up to form a channel)	-	15000	-
5(Table-1)(Thickness of door frame ,if fabricated or multibend)	-	15000	-
5(Table-1)(Dimension of the rebate coming under share)	-	15000	-
5(Table-1)(Thickness of grill gate angle/section)	-	15000	-
5(Table-1)(Diameter of grill gate rod)	-	15000	-
5(Table-1)(Pitch of grill gate rod)	-	15000	-
5(Table-1)(Thickness of door slab,thickness over rebate)	-	15000	-
5(Table-1)(Thickness of the door over lock)	-	15000	-
5(Table-1)(Thickness of drill & oxyacetylene torch resis. layer(exclue MS plate)	-	15000	-
5(Table-1)(Wall thickness)	-	15000	-
5(Table-1)(Number of locks)	-	15000	-
5(Table-1)(Number of shooting bolys on hinge side)	-	15000	-
5(Table-1)(Number of shooting bolts on opposite)	-	15000	-
5(Table-1)(Number of shooting bolts at top)	-	15000	-
5(Table-1)(Number of shooting bolts at bottom)	-	15000	-
5(Table-1)(Cross sectional area as per shooting bolt)	-	15000	-
5(Table-1)(Depth engagement of shooting)	-	15000	-
6(Materail)	-	15000	-
7(Classification)	-	15000	-
8 & 8.1.1(Ventilating Grill Gate (Inside))	-	15000	-
8.1.1.1(Locking device (unpickable dual control lock))	-	15000	-
8.1.2(Main Door- Outer & inner plate thickness)	-	15000	-
8.1.2.1(Door(Finish &Gap of frame/edge with any place))	-	15000	-
8.2(Door frame (No.of barckets & Size for gripping))	-	15000	-
8.2.1(Rebate of the door frame)	-	15000	-
8.2.2(Compression mechanism)	-	15000	-
8.2.3(Crane hinge mechanism)	-	15000	-
8.3(Lock case)	-	15000	-
8.3.2(Bolt work)	-	15000	-
8.3.2.2(Construction (of bolt work))	-	15000	-
8.3.2.3(Bearing piller)	-	15000	-
8.4.1(Shooting bolt control (By lock))	-	15000	-
8.4.2(Test of key-Lock)	-	15000	-
8.4.3(Lock fixing bolts)	-	15000	-
8.4.4(Time lock)	-	15000	-
8.4.5(Automatic Relocking devise)	-	15000	-
9 &9.1(Hinges)	-	15000	-
9.1.1(Adjusting bolt)	-	15000	-
9.2(Handles)	-	15000	-
9.3(Foot bringe)	-	15000	-
9.4(Vault lighting control)	-	15000	-
10 &10.1(Dents,Burrs & Edges)	-	15000	-
10.2(Colour coating thickness (Surafce paint))	-	15000	-
10.3(Cross Hatch test)	-	15000	-
10.4(Door (Stainless cladding))	-	15000	-
11.1 &11.2(Test criteria for confomity -Burglaty attack)	-	15000	-
11.1 &11.2(Test criteria for confomity -Fire resistancey)	-	15000	-
12(Marking of door)	-	15000	-
12.2(Marking on keys)	-	15000	-
4(Type)	-	15000	-
5(Table-1)(5(Table-1))	-	15000	-
5(Table-1)(Overall dimesion of door)	-	15000	-
5(Table-1)(Inside dimension or clear opening of door)	-	15000	-
5(Table-1)(Thickness of door frame angle-made of Plate,if bulit up to form a channel)	-	15000	-
5(Table-1)(Thickness of door frame ,if fabricated or multibend)	-	15000	-
5(Table-1)(Dimension of the rebate coming under share)	-	15000	-
5(Table-1)(Thickness of grill gate angle/section)	-	15000	-
5(Table-1)(Diameter of grill gate rod)	-	15000	-
5(Table-1)(Pitch of grill gate rod)	-	15000	-
5(Table-1)(Thickness of door slab,thickness over rebate)	-	15000	-
5(Table-1)(Thickness of the door over lock)	-	15000	-
5(Table-1)(Thickness of drill & oxyacetylene torch resis. layer(exclue MS plate)	-	15000	-
5(Table-1)(Wall thickness)	-	15000	-
5(Table-1)(Number of locks)	-	15000	-
5(Table-1)(Number of shooting bolys on hinge side)	-	15000	-
5(Table-1)(Number of shooting bolts at top)	-	15000	-
5(Table-1)(Number of shooting bolts at bottom)	-	15000	-
5(Table-1)(Cross sectional area as per shooting bolt)	-	15000	-
5(Table-1)(Depth engagement of shooting)	-	15000	-
6(Materail)	-	15000	-
7(Classification)	-	15000	-
8 & 8.1.1(Ventilating Grill Gate (Inside))	-	15000	-
8.1.1.1(Locking device (unpickable dual control lock))	-	15000	-
8.1.2(Main Door- Outer & inner plate thickness)	-	15000	-
8.1.2.1(Door(Finish &Gap of frame/edge with any place))	-	15000	-
8.2(Door frame (No.of barckets & Size for gripping))	-	15000	-
8.2.1(Rebate of the door frame)	-	15000	-
8.2.2(Compression mechanism)	-	15000	-
8.2.3(Crane hinge mechanism)	-	15000	-
8.3(Lock case)	-	15000	-
8.3.2(Bolt work)	-	15000	-
8.3.2.2(Construction (of bolt work))	-	15000	-
8.3.2.3(Bearing piller)	-	15000	-
8.4.1(Shooting bolt control (By lock))	-	15000	-
8.4.2(Test of key-Lock)	-	15000	-
8.4.3(Lock fixing bolts)	-	15000	-
8.4.4(Time lock)	-	15000	-
8.4.5(Automatic Relocking devise)	-	15000	-
9 &9.1(Hinges)	-	15000	-
9.1.1(Adjusting bolt)	-	15000	-
9.3(Foot bringe)	-	15000	-
9.4(Vault lighting control)	-	15000	-
10 &10.1(Dents,Burrs & Edges)	-	15000	-
10.2(Colour coating thickness (Surafce paint))	-	15000	-
10.3(Cross Hatch test)	-	15000	-
10.4(Door (Stainless cladding))	-	15000	-
11.1 &11.2(Test criteria for confomity -Burglaty attack)	-	15000	-
11.1 &11.2(Test criteria for confomity -Fire resistancey)	-	15000	-
12(Marking of door)	-	15000	-
12.2(Marking on keys)	-	15000	-
11.1 (3)(Fire and stream hose IS 11188 (Part 3))	-	15000	-
11.1 (2)(Fire endurance IS 11188 (Part 3))	-	150000	-
11.1 (1)(Burglary resistance IS 11188 (Part 2))	-	150000	-
10.4(Alternate to Cl 10.4)	-	15000	-
10.3(Cross Hatch Test)	-	15000	-
10(FINISH)	-	15000	-
9.4(Vault Lighting Control)	-	15000	-
9.3(Foot Bridge)	-	15000	-
9.2(Handles)	-	15000	-
9.1.1(Adjusting Bolt)	-	15000	-
9.1(Hinges)	-	15000	-
9(DOOR FITTINGS)	-	15000	-
8.4.5(Automatic Relocking Device)	-	15000	-
8.4.4(Time Lock)	-	15000	-
8.4(Lock)	-	15000	-
8.3.2.2(Construction)	-	15000	-
8.3.2.1(The number of bolts and their minimum dimension)	-	15000	-
8.3.2(Bolt Work)	-	15000	-
8.3.1(Lock Case)	-	15000	-
8.3(Locking Mechanism)	-	15000	-
8.2.3(Crane Hinge Mechanism)	-	15000	-
8.2.2(Compression Mechanism)	-	15000	-
8.2.1(Rebate of the Door Frame)	-	15000	-
8.2(Doors Frame)	-	15000	-
8.1.2(Main Door (Outside))	-	15000	-
8.1.1(Ventilating Grill Gate (Inside))	-	15000	-
8.1 Fig. 1(Doors)	-	15000	-
8(CONSTRUCTION AND GENERALREQUIREMENTS)	-	15000	-
5 Table 1(bolts, Min)	-	15000	-
5 Table 1(xix) Depth of engagement of shooting)	-	15000	-
5 Table 1(cross sectional area, Min,sq mm)	-	15000	-
5 Table 1(xviii) Diameter of shooting bolts, Min)	-	15000	-
5 Table 1(xvi) Number of shooting bolts at top,Min)	-	15000	-
5 Table 1(xv) Number of shooting bolts on opposite side,Min)	-	15000	-
5 Table 1(xiv) Number of shooting bolts on hinge side, Min)	-	15000	-
5 Table 1(xiii) Number of locks)	-	15000	-
5 Table 1(xii) Wall thickness (recommendation))	-	15000	-
5 Table 1(xi) Thickness of drill and oxyacetylene torch resisting layer (excluding mild steel plates),Min)	-	15000	-
5 Table 1(ix) Thickness of doors slab, thickness over rebate)	-	15000	-
5 Table 1(viii) Pitch of grill gate rods)	-	15000	-
5 Table 1(vii) Diameter of grill gate rods, Min)	-	15000	-
5 Table 1(vi) Thickens of grill gate angles or section made out of M.S. plates, Min)	-	15000	-
5 Table 1(v) Dimension of the rebate coming under shear)	-	15000	-
5 Table 1(iv (b) Thickness of door frame, if fabricated from single plate to form channel/multi-bend section, Min)	-	15000	-
5 Table 1(ii (a) Height H, Min b) Width W, Min iv(a) Thickness of door frame angle, channel or section made out of M.S. plates, if built up to form a channel,Min)	-	15000	-
5 Table 1(iii) Inside dimension or clear opening when door shutters are swung open at 180 degree)	-	15000	-
5 Table 1(ii (b) Width W)	-	15000	-
5 Table 1(ii (a) Height, H)	-	15000	-
5 Table 1(ii) Overall dimension of vault door)	-	15000	-
5 Table 1(i) Door Type)	-	15000	-
4(Type)	-	15000	-
5(Table-1)(Type of Door)	-	15000	-
5(Table-1)(Overall dimesion of door)	-	15000	-
5(Table-1)(Inside dimension or clear opening of door)	-	15000	-
5(Table-1)(Thickness of door frame angle-made of Plate,if bulit up to form a channel)	-	15000	-
5(Table-1)(Thickness of door frame ,if fabricated or multibend)	-	15000	-
5(Table-1)(Dimension of the rebate coming under share)	-	15000	-
5(Table-1)(Thickness of grill gate angle/section)	-	15000	-
5(Table-1)(Diameter of grill gate rod)	-	15000	-
5(Table-1)(Pitch of grill gate rod)	-	15000	-
5(Table-1)(Thickness of door slab,thickness over rebate)	-	15000	-
5(Table-1)(Thickness of the door over lock)	-	15000	-
5(Table-1)(Thickness of drill & oxyacetylene torch resis. layer(exclue MS plate)	-	15000	-
5(Table-1)(Wall thickness)	-	15000	-
5(Table-1)(Number of locks)	-	15000	-
5(Table-1)(Number of shooting bolys on hinge side)	-	15000	-
5(Table-1)(Number of shooting bolts on opposite)	-	15000	-
5(Table-1)(Number of shooting bolts at top)	-	15000	-
5(Table-1)(Number of shooting bolts at bottom)	-	15000	-
5(Table-1)(Cross sectional area as per shooting bolt)	-	15000	-
5(Table-1)(Depth engagement of shooting)	-	15000	-
6(Materail)	-	15000	-
7(Classification)	-	15000	-
8 & 8.1.1(Ventilating Grill Gate (Inside))	-	15000	-
8.1.1.1(Locking device (unpickable dual control lock))	-	15000	-
8.1.2(Main Door- Outer & inner plate thickness)	-	15000	-
8.1.2.1(Door(Finish &Gap of frame/edge with any place))	-	15000	-
8.2(Door frame (No.of barckets & Size for gripping))	-	15000	-
8.2.1(Rebate of the door frame)	-	15000	-
8.2.2(Compression mechanism)	-	15000	-
8.2.3(Crane hinge mechanism)	-	15000	-
8.3(Lock case)	-	15000	-
8.3.2(Bolt work)	-	15000	-
8.3.2.2(Construction (of bolt work))	-	15000	-
8.3.2.3(Bearing piller)	-	15000	-
8.4.1(Shooting bolt control (By lock))	-	15000	-
8.4.2(Test of key-Lock)	-	15000	-
8.4.3(Lock fixing bolts)	-	15000	-
8.4.4(Time lock)	-	15000	-
8.4.5(Automatic Relocking devise)	-	15000	-
9 &9.1(Hinges)	-	15000	-
9.1.1(Adjusting bolt)	-	15000	-
9.2(Handles)	-	15000	-
9.3(Foot bringe)	-	15000	-
9.4(Vault lighting control)	-	15000	-
10 &10.1(Dents,Burrs & Edges)	-	15000	-
10.2(Colour coating thickness (Surafce paint))	-	15000	-
10.3(Cross Hatch test)	-	15000	-
10.4(Door (Stainless cladding))	-	15000	-
11.1 &11.2(Test criteria for confomity -Burglaty attack)	-	15000	-
11.1 &11.2(Test criteria for confomity -Fire resistancey)	-	15000	-
12(Marking of door)	-	15000	-
12.2(Marking on keys)	-	15000	-
4(Type)	-	15000	-
5(Table-1)(5(Table-1))	-	15000	-
5(Table-1)(Overall dimesion of door)	-	15000	-
5(Table-1)(Inside dimension or clear opening of door)	-	15000	-
5(Table-1)(Thickness of door frame angle-made of Plate,if bulit up to form a channel)	-	15000	-
5(Table-1)(Thickness of door frame ,if fabricated or multibend)	-	15000	-
5(Table-1)(Dimension of the rebate coming under share)	-	15000	-
5(Table-1)(Thickness of grill gate angle/section)	-	15000	-
5(Table-1)(Diameter of grill gate rod)	-	15000	-
5(Table-1)(Pitch of grill gate rod)	-	15000	-
5(Table-1)(Thickness of door slab,thickness over rebate)	-	15000	-
5(Table-1)(Thickness of the door over lock)	-	15000	-
5(Table-1)(Thickness of drill & oxyacetylene torch resis. layer(exclue MS plate)	-	15000	-
5(Table-1)(Wall thickness)	-	15000	-
5(Table-1)(Number of locks)	-	15000	-
5(Table-1)(Number of shooting bolys on hinge side)	-	15000	-
5(Table-1)(Number of shooting bolts at top)	-	15000	-
5(Table-1)(Number of shooting bolts at bottom)	-	15000	-
5(Table-1)(Cross sectional area as per shooting bolt)	-	15000	-
5(Table-1)(Depth engagement of shooting)	-	15000	-
6(Materail)	-	15000	-
7(Classification)	-	15000	-
8 & 8.1.1(Ventilating Grill Gate (Inside))	-	15000	-
8.1.1.1(Locking device (unpickable dual control lock))	-	15000	-
8.1.2(Main Door- Outer & inner plate thickness)	-	15000	-
8.1.2.1(Door(Finish &Gap of frame/edge with any place))	-	15000	-
8.2(Door frame (No.of barckets & Size for gripping))	-	15000	-
8.2.1(Rebate of the door frame)	-	15000	-
8.2.2(Compression mechanism)	-	15000	-
8.2.3(Crane hinge mechanism)	-	15000	-
8.3(Lock case)	-	15000	-
8.3.2(Bolt work)	-	15000	-
8.3.2.2(Construction (of bolt work))	-	15000	-
8.3.2.3(Bearing piller)	-	15000	-
8.4.1(Shooting bolt control (By lock))	-	15000	-
8.4.2(Test of key-Lock)	-	15000	-
8.4.3(Lock fixing bolts)	-	15000	-
8.4.4(Time lock)	-	15000	-
8.4.5(Automatic Relocking devise)	-	15000	-
9 &9.1(Hinges)	-	15000	-
9.1.1(Adjusting bolt)	-	15000	-
9.3(Foot bringe)	-	15000	-
9.4(Vault lighting control)	-	15000	-
10 &10.1(Dents,Burrs & Edges)	-	15000	-
10.2(Colour coating thickness (Surafce paint))	-	15000	-
10.3(Cross Hatch test)	-	15000	-
10.4(Door (Stainless cladding))	-	15000	-
11.1 &11.2(Test criteria for confomity -Burglaty attack)	-	15000	-
11.1 &11.2(Test criteria for confomity -Fire resistancey)	-	15000	-
12(Marking of door)	-	5000	-
12.2(Marking on keys)	-	5000	-
11.1 (3)(Fire and stream hose IS 11188 (Part 3))	-	15000	-
11.1 (2)(Fire endurance IS 11188 (Part 3))	-	150000	-
11.1 (1)(Burglary resistance IS 11188 (Part 2))	-	150000	-
10.4(Alternate to Cl 10.4)	-	15000	-
10.3(Cross Hatch Test)	-	15000	-
10(FINISH)	-	15000	-
9.4(Vault Lighting Control)	-	15000	-
9.3(Foot Bridge)	-	15000	-
9.2(Handles)	-	15000	-
9.1.1(Adjusting Bolt)	-	15000	-
9.1(Hinges)	-	15000	-
9(DOOR FITTINGS)	-	15000	-
8.4.5(Automatic Relocking Device)	-	15000	-
8.4.4(Time Lock)	-	15000	-
8.4(Lock)	-	15000	-
8.3.2.2(Construction)	-	15000	-
8.3.2.1(The number of bolts and their minimum dimension)	-	15000	-
8.3.2(Bolt Work)	-	15000	-
8.3.1(Lock Case)	-	15000	-
8.3(Locking Mechanism)	-	15000	-
8.2.3(Crane Hinge Mechanism)	-	15000	-
8.2.2(Compression Mechanism)	-	15000	-
8.2.1(Rebate of the Door Frame)	-	15000	-
8.2(Doors Frame)	-	15000	-
8.1.2(Main Door (Outside))	-	15000	-
8.1.1(Ventilating Grill Gate (Inside))	-	15000	-
8.1 Fig. 1(Doors)	-	15000	-
8(CONSTRUCTION AND GENERALREQUIREMENTS)	-	15000	-
5 Table 1(bolts, Min)	-	15000	-
5 Table 1(xix) Depth of engagement of shooting)	-	15000	-
5 Table 1(cross sectional area, Min,sq mm)	-	15000	-
5 Table 1(xviii) Diameter of shooting bolts, Min)	-	15000	-
5 Table 1(xvi) Number of shooting bolts at top,Min)	-	15000	-
5 Table 1(xv) Number of shooting bolts on opposite side,Min)	-	15000	-
5 Table 1(xiv) Number of shooting bolts on hinge side, Min)	-	15000	-
5 Table 1(xiii) Number of locks)	-	15000	-
5 Table 1(xii) Wall thickness (recommendation))	-	15000	-
5 Table 1(xi) Thickness of drill and oxyacetylene torch resisting layer (excluding mild steel plates),Min)	-	15000	-
5 Table 1(ix) Thickness of doors slab, thickness over rebate)	-	15000	-
5 Table 1(viii) Pitch of grill gate rods)	-	15000	-
5 Table 1(vii) Diameter of grill gate rods, Min)	-	15000	-
5 Table 1(vi) Thickens of grill gate angles or section made out of M.S. plates, Min)	-	15000	-
5 Table 1(v) Dimension of the rebate coming under shear)	-	15000	-
5 Table 1(iv (b) Thickness of door frame, if fabricated from single plate to form channel/multi-bend section, Min)	-	15000	-
5 Table 1(ii (a) Height H, Min b) Width W, Min iv(a) Thickness of door frame angle, channel or section made out of M.S. plates, if built up to form a channel,Min)	-	15000	-
5 Table 1(iii) Inside dimension or clear opening when door shutters are swung open at 180 degree)	-	15000	-
5 Table 1(ii (b) Width W)	-	15000	-
5 Table 1(ii (a) Height, H)	-	15000	-
5 Table 1(ii) Overall dimension of vault door)	-	15000	-
5 Table 1(i) Door Type)	-	15000	-
4(Type)	-	15000	-
5(Table-1)(Type of Door)	-	15000	-
5(Table-1)(Overall dimesion of door)	-	15000	-
5(Table-1)(Inside dimension or clear opening of door)	-	15000	-
5(Table-1)(Thickness of door frame angle-made of Plate,if bulit up to form a channel)	-	15000	-
5(Table-1)(Thickness of door frame ,if fabricated or multibend)	-	15000	-
5(Table-1)(Dimension of the rebate coming under share)	-	15000	-
5(Table-1)(Thickness of grill gate angle/section)	-	15000	-
5(Table-1)(Diameter of grill gate rod)	-	15000	-
5(Table-1)(Pitch of grill gate rod)	-	15000	-
5(Table-1)(Thickness of door slab,thickness over rebate)	-	15000	-
5(Table-1)(Thickness of the door over lock)	-	15000	-
5(Table-1)(Thickness of drill & oxyacetylene torch resis. layer(exclue MS plate)	-	15000	-
5(Table-1)(Wall thickness)	-	15000	-
5(Table-1)(Number of locks)	-	15000	-
5(Table-1)(Number of shooting bolys on hinge side)	-	15000	-
5(Table-1)(Number of shooting bolts on opposite)	-	15000	-
5(Table-1)(Number of shooting bolts at top)	-	15000	-
5(Table-1)(Number of shooting bolts at bottom)	-	15000	-
5(Table-1)(Cross sectional area as per shooting bolt)	-	15000	-
5(Table-1)(Depth engagement of shooting)	-	15000	-
6(Materail)	-	15000	-
7(Classification)	-	15000	-
8 & 8.1.1(Ventilating Grill Gate (Inside))	-	15000	-
8.1.1.1(Locking device (unpickable dual control lock))	-	15000	-
8.1.2(Main Door- Outer & inner plate thickness)	-	15000	-
8.1.2.1(Door(Finish &Gap of frame/edge with any place))	-	15000	-
8.2(Door frame (No.of barckets & Size for gripping))	-	15000	-
8.2.1(Rebate of the door frame)	-	15000	-
8.2.2(Compression mechanism)	-	15000	-
8.2.3(Crane hinge mechanism)	-	15000	-
8.3(Lock case)	-	15000	-
8.3.2(Bolt work)	-	15000	-
8.3.2.2(Construction (of bolt work))	-	15000	-
8.3.2.3(Bearing piller)	-	15000	-
8.4.1(Shooting bolt control (By lock))	-	15000	-
8.4.2(Test of key-Lock)	-	15000	-
8.4.3(Lock fixing bolts)	-	15000	-
8.4.4(Time lock)	-	15000	-
8.4.5(Automatic Relocking devise)	-	15000	-
9 &9.1(Hinges)	-	15000	-
9.1.1(Adjusting bolt)	-	15000	-
9.2(Handles)	-	15000	-
9.3(Foot bringe)	-	15000	-
9.4(Vault lighting control)	-	15000	-
10 &10.1(Dents,Burrs & Edges)	-	15000	-
10.2(Colour coating thickness (Surafce paint))	-	15000	-
10.3(Cross Hatch test)	-	15000	-
10.4(Door (Stainless cladding))	-	15000	-
11.1 &11.2(Test criteria for confomity -Burglaty attack)	-	15000	-
11.1 &11.2(Test criteria for confomity -Fire resistancey)	-	15000	-
12(Marking of door)	-	15000	-
12.2(Marking on keys)	-	15000	-
4(Type)	-	15000	-
5(Table-1)(5(Table-1))	-	15000	-
5(Table-1)(Overall dimesion of door)	-	15000	-
5(Table-1)(Inside dimension or clear opening of door)	-	15000	-
5(Table-1)(Thickness of door frame angle-made of Plate,if bulit up to form a channel)	-	15000	-
5(Table-1)(Thickness of door frame ,if fabricated or multibend)	-	15000	-
5(Table-1)(Dimension of the rebate coming under share)	-	15000	-
5(Table-1)(Thickness of grill gate angle/section)	-	15000	-
5(Table-1)(Diameter of grill gate rod)	-	15000	-
5(Table-1)(Pitch of grill gate rod)	-	15000	-
5(Table-1)(Thickness of door slab,thickness over rebate)	-	15000	-
5(Table-1)(Thickness of the door over lock)	-	15000	-
5(Table-1)(Thickness of drill & oxyacetylene torch resis. layer(exclue MS plate)	-	15000	-
5(Table-1)(Wall thickness)	-	15000	-
5(Table-1)(Number of locks)	-	15000	-
5(Table-1)(Number of shooting bolys on hinge side)	-	15000	-
5(Table-1)(Number of shooting bolts at top)	-	15000	-
5(Table-1)(Number of shooting bolts at bottom)	-	15000	-
5(Table-1)(Cross sectional area as per shooting bolt)	-	15000	-
5(Table-1)(Depth engagement of shooting)	-	15000	-
6(Materail)	-	15000	-
7(Classification)	-	15000	-
8 & 8.1.1(Ventilating Grill Gate (Inside))	-	15000	-
8.1.1.1(Locking device (unpickable dual control lock))	-	15000	-
8.1.2(Main Door- Outer & inner plate thickness)	-	15000	-
8.1.2.1(Door(Finish &Gap of frame/edge with any place))	-	15000	-
8.2(Door frame (No.of barckets & Size for gripping))	-	15000	-
8.2.1(Rebate of the door frame)	-	15000	-
8.2.2(Compression mechanism)	-	15000	-
8.2.3(Crane hinge mechanism)	-	15000	-
8.3(Lock case)	-	15000	-
8.3.2(Bolt work)	-	15000	-
8.3.2.2(Construction (of bolt work))	-	15000	-
8.3.2.3(Bearing piller)	-	15000	-
8.4.1(Shooting bolt control (By lock))	-	15000	-
8.4.2(Test of key-Lock)	-	15000	-
8.4.3(Lock fixing bolts)	-	15000	-
8.4.4(Time lock)	-	15000	-
8.4.5(Automatic Relocking devise)	-	15000	-
9 &9.1(Hinges)	-	15000	-
9.1.1(Adjusting bolt)	-	15000	-
9.3(Foot bringe)	-	15000	-
9.4(Vault lighting control)	-	15000	-
10 &10.1(Dents,Burrs & Edges)	-	15000	-
10.2(Colour coating thickness (Surafce paint))	-	15000	-
10.3(Cross Hatch test)	-	15000	-
10.4(Door (Stainless cladding))	-	15000	-
11.1 &11.2(Test criteria for confomity -Burglaty attack)	-	15000	-
11.1 &11.2(Test criteria for confomity -Fire resistancey)	-	15000	-
12(Marking of door)	-	15000	-
12.2(Marking on keys)	-	15000	-

14 Nov, 2027

-
Included w.e.f. 28.03.2025

IS 550 : Part 1 (2022)

Safes: Part 1 specification Fifth Revision

258000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Classification)	-	124999.97	-
5.1(Dimensions)	-	10000	-
5.2(Sizes)	-	10000	-
5.2(Table-2)(Inside dimensions)	-	10000	-
5.2(Table-2)(Tolerance on inside dimensions)	-	10000	-
5.2(Table-2)(Internal volume)	-	10000	-
5.2(Table-2)(Tolerance on interanal volume)	-	10000	-
5.2(Table-2)(Minumum Weight)	-	10000	-
5.2(Table-2)(Thickness of Plates (outer bodys& Door))	-	10000	-
5.2(Table-2)(Thickness of Door slab)	-	10000	-
5.2(Table-2)(Thickness of door overbolt work)	-	10000	-
5.2(Table-2)(Number of lock on the door)	-	10000	-
5.2(Table-2)(Any other type of lock)	-	10000	-
5.2(Table-2)(Number of bolt on hinge side)	-	10000	-
5.2(Table-2)(Number of bolt on opposite hinge)	-	10000	-
5.2(Table-2)(No.of bolt at the top)	-	10000	-
5.2(Table-2)(No.of bolt at the bottom)	-	10000	-
5.2(Table-2)(Size of each bolt (area of bolt section))	-	10000	-
5.2(Table-2)(Depth engagement of bolt)	-	10000	-
6(Material declaration)	-	10000	-
7(Desigantion-Delaration)	-	10000	-
8.1(Body (Construction & workmanship))	-	10000	-
8.2(Door (Gap))	-	10000	-
8.4.1(Hinges)	-	10000	-
8.4.2(Bolts)	-	10000	-
8.5(Handle)	-	10000	-
8.6.1(Lock (key type) Garde)	-	10000	-
8.6.1(Lock (key type)classification)	-	10000	-
8.6.1(Lock (key type)construction)	-	10000	-
8.6.1(Lock(key type) leaver thickness)	-	10000	-
8.6.1(Lock (key type)Material)	-	10000	-
8.6.1(Lock (key type)corrosion protection materail)	-	10000	-
8.6.1(Lock(key type) -Endurance test)	-	10000	-
8.6.1(Lock(key type)-Bolt forcing test)	-	10000	-
8.6.1(Lock(key type)-salt spray solution test)	-	10000	-
8.6.1(Lock(key type)-key strength test)	-	10000	-
8.6.1(Lock(key type) -Marking)	-	10000	-
8.6.1(Lock(Key type) -Key Marking)	-	10000	-
8.6.1(Mechanical combination lock -Classification)	-	10000	-
8.6.1(Mechanical combination lock -Construction)	-	10000	-
8.6.1(Mechanical combination lock -Metallic parts)	-	10000	-
8.6.1(Mechanical combination lock -Corrosion Prot)	-	10000	-
8.6.1(Mechanical combination lock -Operation test)	-	10000	-
8.6.1(Mechanical cmbination lock -Manipulation)	-	10000	-
8.6.1(Mechanical combination lock -Punching attack)	-	10000	-
8.6.1(Mechanical combination lock -Endurance test)	-	10000	-
8.6.1(Mechanical combination lock-Salt spary test)	-	10000	-
8.6.1(Mechanical combination lock-Strength test)	-	10000	-
8.6.1(Mechanical combination lock-Aging-stress Dist)	-	10000	-
8.6.1(Mechanical combination lock-Moisture Absorp)	-	10000	-
8.6.1(Mechanical combination lock-Vibration test)	-	10000	-
8.6.1(Mechanical combination lock-Marking)	-	10000	-
8.6.1(Any other lock)	-	10000	-
8.6.4(Lock Bolt engagement)	-	10000	-
8.6.5(Additional provision- retrofitting time lock)	-	10000	-
8.7(Automatic re-locking device)	-	10000	-
8.8(Cable hole size)	-	10000	-
9(Internal fixture)	-	10000	-
10(Painting)	-	10000	-
10.1(Cross hatch test)	-	10000	-
11.1(Marking of safe)	-	10000	-
12(Burglary attack)	-	99999.97	-
12(Fire Resistance)	-	150000	-
4(Classification)	-	100000	-
5.1(Dimensions)	-	10000	-
5.2(Sizes)	-	10000	-
5.2(Table-2)(Inside dimensions)	-	10000	-
5.2(Table-2)(Tolerance on inside dimensions)	-	10000	-
5.2(Table-2)(Internal volume)	-	10000	-
5.2(Table-2)(Tolerance on interanal volume)	-	10000	-
5.2(Table-2)(Minumum Weight)	-	10000	-
5.2(Table-2)(Thickness of Plates (outer bodys& Door))	-	10000	-
5.2(Table-2)(Thickness of Door slab)	-	10000	-
5.2(Table-2)(Thickness of door overbolt work)	-	10000	-
5.2(Table-2)(Number of lock on the door)	-	10000	-
5.2(Table-2)(Any other type of lock)	-	10000	-
5.2(Table-2)(Number of bolt on hinge side)	-	10000	-
5.2(Table-2)(Number of bolt on opposite hinge)	-	10000	-
5.2(Table-2)(No.of bolt at the top)	-	10000	-
5.2(Table-2)(No.of bolt at the bottom)	-	10000	-
5.2(Table-2)(Size of each bolt (area of bolt section))	-	10000	-
5.2(Table-2)(Depth engagement of bolt)	-	10000	-
6(Material declaration)	-	10000	-
7(Desigantion-Delaration)	-	10000	-
8.1(Body (Construction & workmanship))	-	10000	-
8.2(Door (Gap))	-	10000	-
8.4.1(Hinges)	-	10000	-
8.4.2(Bolts)	-	10000	-
8.5(Handle)	-	10000	-
8.6.1(Lock (key type) Garde)	-	10000	-
8.6.1(Lock (key type)classification)	-	10000	-
8.6.1(Lock (key type)construction)	-	10000	-
8.6.1(Lock(key type) leaver thickness)	-	10000	-
8.6.1(Lock (key type)Material)	-	10000	-
8.6.1(Lock (key type)corrosion protection materail)	-	10000	-
8.6.1(Lock(key type) -Endurance test)	-	10000	-
8.6.1(Lock(key type)-Bolt forcing test)	-	10000	-
8.6.1(Lock(key type)-salt spray solution test)	-	10000	-
8.6.1(Lock(key type)-key strength test)	-	10000	-
8.6.1(Lock(key type) -Marking)	-	10000	-
8.6.1(Lock(Key type) -Key Marking)	-	10000	-
8.6.1(Mechanical combination lock -Classification)	-	10000	-
8.6.1(Mechanical combination lock -Construction)	-	10000	-
8.6.1(Mechanical combination lock -Metallic parts)	-	10000	-
8.6.1(Mechanical combination lock -Corrosion Prot)	-	10000	-
8.6.1(Mechanical combination lock -Operation test)	-	10000	-
8.6.1(Mechanical cmbination lock -Manipulation)	-	10000	-
8.6.1(Mechanical combination lock -Punching attack)	-	10000	-
8.6.1(Mechanical combination lock -Endurance test)	-	10000	-
8.6.1(Mechanical combination lock-Salt spary test)	-	10000	-
8.6.1(Mechanical combination lock-Strength test)	-	10000	-
8.6.1(Mechanical combination lock-Aging-stress Dist)	-	10000	-
8.6.1(Mechanical combination lock-Moisture Absorp)	-	10000	-
8.6.1(Mechanical combination lock-Vibration test)	-	10000	-
8.6.1(Mechanical combination lock-Marking)	-	10000	-
8.6.1(Any other lock)	-	10000	-
8.6.4(Lock Bolt engagement)	-	10000	-
8.6.5(Additional provision- retrofitting time lock)	-	10000	-
8.7(Automatic re-locking device)	-	10000	-
8.8(Cable hole size)	-	10000	-
9(Internal fixture)	-	10000	-
10(Painting)	-	10000	-
10.1(Cross hatch test)	-	10000	-
11.1(Marking of safe)	-	10000	-
12(Burglary attack)	-	100000	-
12(Fire Resistance)	-	150000	-

14 Nov, 2027

-
Included w.e.f. 28.03.2025

IS 5244 (2020)

Safe Deposit Locker Cabinets — Specification ( Fourth Revision )

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4.1( Types )	-	1000	-
Cl. 6 (Fig-5)(Cabinet Size (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Finish)	-	1000	-
Table 1(Finish)	-	1000	-
Cl.6(Sizes (Minimum Inside Measurements of locker) Locker Size)	-	1000	-
Cl.6(Sizes (Minimum Inside Measurements of locker) Locker Size)	-	1000	-
Cl.6(Sizes (Minimum Inside Measurements of locker) Locker Size)	-	1000	-
Cl. 7.1(Design and Manufacture)	-	1000	-
Cl. 7.1(Design and Manufacture)	-	1000	-
Cl. 7.1(Design and Manufacture)	-	1000	-
Cl. 7.1(Design and Manufacture)	-	1000	-
Cl. 7.1(Design and Manufacture)	-	1000	-
Cl. 7.2(Design and Manufacture)	-	1000	-
Cl. 7.3(Design and Manufacture)	-	1000	-
Cl. 7.3(Design and Manufacture)	-	1000	-
Cl. 7.4(Design and Manufacture)	-	1000	-
Cl. 7.5(Design and Manufacture)	-	1000	-
Cl. 7.6(Design and Manufacture)	-	1000	-
Cl. 8(Workmanship)	-	1000	-
Cl. 8.2(Tolerance)	-	1000	-
Cl. 9.1(Testing)	-	1000	-
Cl. 9.2(Testing)	-	1000	-
Cl. 9.3(Cross Hatch Test)	-	1000	-
Cl. 10.1(Marking)	-	1000	-
Cl. 10.2(Marking)	-	1000	-
Cl. 10.3(Marking)	-	1000	-
Cl. 10.4(Marking on Keys)	-	1000	-
Cl. 11(Packing)	-	1000	-
Cl. 4.1( Types )	-	1000	-
Cl. 6 (Fig-5)(Cabinet Size (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Finish)	-	1000	-
Table 1(Finish)	-	1000	-
Cl.6(Sizes (Minimum Inside Measurements of locker) Locker Size)	-	1000	-
Cl.6(Sizes (Minimum Inside Measurements of locker) Locker Size)	-	1000	-
Cl.6(Sizes (Minimum Inside Measurements of locker) Locker Size)	-	1000	-
Cl. 7.1(Design and Manufacture)	-	1000	-
Cl. 7.1(Design and Manufacture)	-	1000	-
Cl. 7.1(Design and Manufacture)	-	1000	-
Cl. 7.1(Design and Manufacture)	-	1000	-
Cl. 7.1(Design and Manufacture)	-	1000	-
Cl. 7.2(Design and Manufacture)	-	1000	-
Cl. 7.3(Design and Manufacture)	-	1000	-
Cl. 7.3(Design and Manufacture)	-	1000	-
Cl. 7.4(Design and Manufacture)	-	1000	-
Cl. 7.5(Design and Manufacture)	-	1000	-
Cl. 7.6(Design and Manufacture)	-	1000	-
Cl. 8(Workmanship)	-	1000	-
Cl. 8.2(Tolerance)	-	1000	-
Cl. 9.1(Testing)	-	1000	-
Cl. 9.2(Testing)	-	1000	-
Cl. 9.3(Cross Hatch Test)	-	1000	-
Cl. 10.1(Marking)	-	1000	-
Cl. 10.2(Marking)	-	1000	-
Cl. 10.3(Marking)	-	1000	-
Cl. 10.4(Marking on Keys)	-	1000	-
Cl. 11(Packing)	-	1000	-
Cl. 4.1( Types )	-	1000	-
Cl. 6 (Fig-5)(Cabinet Size (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Finish)	-	1000	-
Table 1(Finish)	-	1000	-
Cl.6(Sizes (Minimum Inside Measurements of locker) Locker Size)	-	1000	-
Cl.6(Sizes (Minimum Inside Measurements of locker) Locker Size)	-	1000	-
Cl.6(Sizes (Minimum Inside Measurements of locker) Locker Size)	-	1000	-
Cl. 7.1(Design and Manufacture)	-	1000	-
Cl. 7.1(Design and Manufacture)	-	1000	-
Cl. 7.1(Design and Manufacture)	-	1000	-
Cl. 7.1(Design and Manufacture)	-	1000	-
Cl. 7.1(Design and Manufacture)	-	1000	-
Cl. 7.2(Design and Manufacture)	-	1000	-
Cl. 7.3(Design and Manufacture)	-	1000	-
Cl. 7.3(Design and Manufacture)	-	1000	-
Cl. 7.4(Design and Manufacture)	-	1000	-
Cl. 7.5(Design and Manufacture)	-	1000	-
Cl. 7.6(Design and Manufacture)	-	1000	-
Cl. 8(Workmanship)	-	1000	-
Cl. 8.2(Tolerance)	-	1000	-
Cl. 9.1(Testing)	-	1000	-
Cl. 9.2(Testing)	-	1000	-
Cl. 9.3(Cross Hatch Test)	-	1000	-
Cl. 10.1(Marking)	-	1000	-
Cl. 10.2(Marking)	-	1000	-
Cl. 10.3(Marking)	-	1000	-
Cl. 10.4(Marking on Keys)	-	1000	-
Cl. 11(Packing)	-	1000	-

14 Nov, 2027

-
Included w.e.f. 28.03.2025

IS 17541 (2021)

Modular panel for security of premises specification

355000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause-5(Dimensions)	-	5000	-
Clause-6(Materials)	-	25000	-
Clause-8(Construction and General Requirements)	-	45000	-
Clause-9(Fittings)	-	35000	-
Clause-10(Finish)	-	15000	-
Clause-10.1(Cross Hatch Test)	-	35000	-
Clause-11.2, 1(Full length panel (Continuous design panel))	-	150000	-
Clause-11.2, 2(Assemble panel/Segmented panel)	-	250000	-
Clause-12(Marking)	-	5000	-
Clause-5(Dimensions)	-	25000	-
Clause-6(Materials)	-	35000	-
Clause-8(Construction and General Requirements)	-	55000	-
Clause-9(Fittings)	-	55000	-
Clause-10(Finish)	-	25000	-
Clause-10.1(Cross Hatch Test)	-	55000	-
Clause-11.2, 1(Full length panel (Continuous design panel))	-	150000	-
Clause-11.2, 2(Assemble panel/Segmented panel)	-	250000	-
Clause-12(Marking)	-	5000	-

14 Nov, 2027

-
Included w.e.f. 28.03.2025

IS 14257 (2019)

Lead - Acid storage batteries for motor vehicles with light weight and high cranking performance - Specification (First Revision)

660000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Rating)	-	5000	-
6(Capacities, Dimensions, Mass & Layout)	-	5000	-
8(Marking)	-	5000	-
9.3.1(Physical Examination)	-	5000	-
9.3.2(Dimensions and Layout)	-	5000	-
9.3.3(Marking)	-	5000	-
9.3.4(Capacity (5h Rate) Test)	-	250000	-
9.3.5(High Rate Discharge Test)	-	100000	-
9.3.6(Cold Cranking Performance Test (CCA))	-	100000	-
9.3.7(Reserve Capacity Test)	-	100000	-
9.3.8(Charge acceptance test)	-	100000	-
9.3.9(Water Consumption Test)	-	100000	-
9.3.10(Charge Retention Test)	-	100000	-
9.3.11(Light Load Endurance (LLE) Test)	-	100000	-
9.3.12(Life Cycle Test)	-	350000	-
9.3.13(Overcharge Endurance Test)	-	100000	-
9.3.14(Electrolyte Retention Test)	-	100000	-
9.3.15(Vibration Resistance Test)	-	100000	-
9.3.16(Strength of Terminal Test)	-	100000	-
9.3.17(Robustness to Fastening Test)	-	100000	-
9.3.18(Test For Dry-Charged Battery)	-	100000	-
4, Table no. 1(Direct-Current Potentiometers Third Revision)	-	10000	-
5(RATING)	-	5000	-
6, Table no. 2(CAPACITIES, DIMENSIONS, MASS AND LAYOUT)	-	5000	-
7(CHARGING)	-	150000	-
8(MARKING)	-	5000	-
5(Rating)	-	5000	-
6(Capacities, Dimensions, Mass & Layout)	-	150000	-
8(Marking)	-	5000	-
9.3.1(Physical Examination)	-	10000	-
9.3.2(Dimensions and Layout)	-	10000	-
9.3.3(Marking)	-	5000	-
9.3.4(Capacity (5h Rate) Test)	-	150000	-
9.3.5(High Rate Discharge Test)	-	100000	-
9.3.6(Cold Cranking Performance Test (CCA))	-	100000	-
9.3.7(Reserve Capacity Test)	-	100000	-
9.3.8(Charge acceptance test)	-	100000	-
9.3.9(Water Consumption Test)	-	50000	-
9.3.10(Charge Retention Test)	-	100000	-
9.3.11(Light Load Endurance (LLE) Test)	-	80000	-
9.3.12(Life Cycle Test)	-	350000	-
9.3.13(Overcharge Endurance Test)	-	100000	-
9.3.14(Electrolyte Retention Test)	-	100000	-
9.3.15(Vibration Resistance Test)	-	85000	-
9.3.16(Strength of Terminal Test)	-	80000	-
9.3.17(Robustness to Fastening Test)	-	80000	-
9.3.18(Test For Dry-Charged Battery)	-	50000	-
4, Table no. 1(Direct-Current Potentiometers Third Revision)	-	5000	-
5(RATING)	-	5000	-
6, Table no. 2(CAPACITIES, DIMENSIONS, MASS AND LAYOUT)	-	5000	-
7(CHARGING)	-	5000	-
8(MARKING)	-	5000	-

14 Nov, 2027

-
Included w.e.f 05.05.2025

IS 13369 (1992)

Stationary lead - Acid batteries (With Tubular Positive Plates) in monobloc container - Specification

350000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 11.2(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
Cl. 11.4(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
Cl. 11.4(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
Cl. 11.5(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
Cl. 11.8(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
Cl. 11.6(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
Cl. 11.7(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
Cl. 11.9(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
Cl. 11.10(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
5(MATERIALS )	-	5000	-
6(CONSTRUCTIONAL REQUIREMENTS)	-	5000	-
7(CAPACITY AND DIMENSIONS)	-	10000	-
8(MARKING AND PACKING)	-	10000	-
10(GENERAL REQUIREMENTS FOR TESTS)	-	5000	-
11(TESTS)	-	150000	-
Cl. 11.2(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
Cl. 11.4(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
Cl. 11.4(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
Cl. 11.5(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
Cl. 11.8(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
Cl. 11.6(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
Cl. 11.7(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
Cl. 11.9(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
Cl. 11.10(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
5(MATERIALS )	-	5000	-
6(CONSTRUCTIONAL REQUIREMENTS)	-	5000	-
7(CAPACITY AND DIMENSIONS)	-	5000	-
8(MARKING AND PACKING)	-	5000	-
10(GENERAL REQUIREMENTS FOR TESTS)	-	5000	-
11(TESTS)	-	50000	-

14 Nov, 2027

-
Included w.e.f 05.05.2025

IS 15549 (2005)

Stationary valve regulated lead acid batteries - Specification

218000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.1(Endurance Life Cycle Test)	-	50000	-
12.9 & Annex C(Test for Oxygen Recombination Efficiency)	-	5000	-
12.8(Test for Vent Seal Operation)	-	5000	-
12.7 & Annex B(Test on Separators)	-	50000	-
12.6(Test for Retention of Charge)	-	50000	-
12.5(Watt Hour Efficiency)	-	50000	-
12.4(Ampere Hour Efficiency)	-	50000	-
12.3(Capacity Test at Other Discharge Rates)	-	100000	-
12.2(Test for C 1 Capacity)	-	100000	-
12.1(Test for C 10 Capacity)	-	100000	-
9(Temperature for Tests)	-	10000	-
8(Markings on Cell)	-	5000	-
7.5(Information to be Furnished by the Battery Supplier)	-	49999.98	-
7.4(Information to be Furnished by Purchaser with Enquiry/Order)	-	5000	-
7.3(Standard Cell Capacities)	-	5000	-
7.2(Designation of Cells)	-	5000	-
7.1(Rating )	-	5000	-
4(MATERIAL AND CONSTRUCTION)	-	5000	-
5(FLAME ARRESTOR)	-	5000	-
6(CHARGERS)	-	5000	-
7(RATING AND DESIGNATION)	-	5000	-
8(MARKINGS ON CELL)	-	5000	-
9(TEMPERATURE FOR TESTS)	-	5000	-
10(CLASSIFICATION OF TESTS)	-	5000	-
11(ACCEPTANCE TESTS)	-	100000	-
12(TESTS PROCEDURES)	-	10000	-
12.1(Endurance Life Cycle Test)	-	150000	-
12.9 & Annex C(Test for Oxygen Recombination Efficiency)	-	100000	-
12.8(Test for Vent Seal Operation)	-	10000	-
12.7 & Annex B(Test on Separators)	-	10000	-
12.6(Test for Retention of Charge)	-	100000	-
12.5(Watt Hour Efficiency)	-	100000	-
12.4(Ampere Hour Efficiency)	-	100000	-
12.3(Capacity Test at Other Discharge Rates)	-	100000	-
12.2(Test for C 1 Capacity)	-	100000	-
12.1(Test for C 10 Capacity)	-	100000	-
9(Temperature for Tests)	-	50000	-
8(Markings on Cell)	-	5000	-
7.5(Information to be Furnished by the Battery Supplier)	-	5000	-
7.4(Information to be Furnished by Purchaser with Enquiry/Order)	-	5000	-
7.3(Standard Cell Capacities)	-	5000	-
7.2(Designation of Cells)	-	5000	-
7.1(Rating )	-	5000	-
4(MATERIAL AND CONSTRUCTION)	-	5000	-
5(FLAME ARRESTOR)	-	5000	-
6(CHARGERS)	-	5000	-
7(RATING AND DESIGNATION)	-	5000	-
8(MARKINGS ON CELL)	-	5000	-
9(TEMPERATURE FOR TESTS)	-	50000	-
10(CLASSIFICATION OF TESTS)	-	5000	-
11(ACCEPTANCE TESTS)	-	100000	-
12(TESTS PROCEDURES)	-	5000	-

14 Nov, 2027

-
Included w.e.f 05.05.2025

IS 16543 (2024)

All-glass evacuated solar collector tubes - Specification (First revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4.1(Structure of All-Glass Evacuated Solar Collector Tube)	-	500	-
Cl 4.2 & table 1(Outer Diameter of Cover Glass Tube)	-	500	-
Cl 4.2 & table 1(Outer Diameter of Inner Glass Tube Including Coating)	-	500	-
Cl 4.2 & table 1(The Thickness of Cover and Inner Glass Tube)	-	499.97	-
Cl 4.2 & table 1(Tube Length)	-	1000	-
Cl 4.2 & table 1(Sealed off Part Length)	-	999.96	-
Cl 4.3(Absorber Area for Different Tube Sizes)	-	999.98	-
Cl 4.4(Solar Selective Absorbing Coating)	-	999.97	-
Cl 4.5(Calculation for Number of Tubes for The Heating System)	-	1000	-
Cl 5.1.1(Transmittance ratio ( material))	-	1000	-
Cl 5.1.2(Bubble & crack (material))	-	500	-
Cl 5.1.3(Knots (material))	-	500	-
Cl 5.1.4(Solar absorbing ratio (material))	-	500	-
Cl 5.2.1(Scratch length and visibility)	-	2500	-
Cl 5.2.2(Appearance of selective coating)	-	2000	-
Cl 5.2.3(Colour fading area)	-	2000	-
Cl 5.2.4(Strut member)	-	2000	-
Cl 5.2.5(The inner and cover tube at the open end)	-	2000	-
Cl 5.2.6(Length of an all-glass evacuated solar collector tube)	-	2000	-
Cl 5.2.7(Bending of the all-glass evacuated solar collector tube)	-	5000	-
Cl 5.2.8(Cross-section of the open end)	-	2500	-
Cl 5.2.9(Sealed end)	-	2500	-
Cl 7.2.2(Uniformity)	-	2500	-
Cl 7.4(Stagnation Performance Parameter Test)	-	5000	-
Cl 7.5(Stagnation Solar Irradiation Test)	-	5000	-
Cl 7.6(Average Heat Loss Coefficient Test)	-	5000	-
Cl 7.7(Vacuum Performance Test)	-	2000	-
Cl 7.8(Resistance to Thermal Shock Test)	-	2000	-
Cl 7.9(Resistance to Impact Test)	-	2000	-
Cl 7.10(0 Resistance to Internal Pressure Test)	-	2000	-
Cl 7.11(Absorptivity and Emissivity Test of the Selective Coating)	-	2000	-
Cl 9(Marking)	-	500	-
Cl 4.1(Structure of All-Glass Evacuated Solar Collector Tube)	-	500	-
Cl 4.2 & table 1(Outer Diameter of Cover Glass Tube)	-	500	-
Cl 4.2 & table 1(Outer Diameter of Inner Glass Tube Including Coating)	-	500	-
Cl 4.2 & table 1(The Thickness of Cover and Inner Glass Tube)	-	500	-
Cl 4.2 & table 1(Tube Length)	-	500	-
Cl 4.2 & table 1(Sealed off Part Length)	-	1000	-
Cl 4.3(Absorber Area for Different Tube Sizes)	-	1000	-
Cl 4.4(Solar Selective Absorbing Coating)	-	1000	-
Cl 4.5(Calculation for Number of Tubes for The Heating System)	-	500	-
Cl 5.1.1(Transmittance ratio ( material))	-	1000	-
Cl 5.1.2(Bubble & crack (material))	-	1000	-
Cl 5.1.3(Knots (material))	-	1000	-
Cl 5.1.4(Solar absorbing ratio (material))	-	1000	-
Cl 5.2.1(Scratch length and visibility)	-	1000	-
Cl 5.2.2(Appearance of selective coating)	-	1000	-
Cl 5.2.3(Colour fading area)	-	1000	-
Cl 5.2.4(Strut member)	-	1000	-
Cl 5.2.5(The inner and cover tube at the open end)	-	500	-
Cl 5.2.6(Length of an all-glass evacuated solar collector tube)	-	5000	-
Cl 5.2.7(Bending of the all-glass evacuated solar collector tube)	-	5000	-
Cl 5.2.8(Cross-section of the open end)	-	2500	-
Cl 5.2.9(Sealed end)	-	2500	-
Cl 7.2.2(Uniformity)	-	2500	-
Cl 7.4(Stagnation Performance Parameter Test)	-	2500	-
Cl 7.5(Stagnation Solar Irradiation Test)	-	2500	-
Cl 7.6(Average Heat Loss Coefficient Test)	-	5000	-
Cl 7.7(Vacuum Performance Test)	-	5000	-
Cl 7.8(Resistance to Thermal Shock Test)	-	10000	-
Cl 7.9(Resistance to Impact Test)	-	5000	-
Cl 7.10(0 Resistance to Internal Pressure Test)	-	2500	-
Cl 7.11(Absorptivity and Emissivity Test of the Selective Coating)	-	2500	-
Cl 9(Marking)	-	500	-

14 Nov, 2027

-
Included w.e.f 04.03.2025

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

43500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12(Charging of metal-ion batteries)	-	5000	-
6(Classification- IS 302-1)	-	500	-
5(General conditions for the tests)	-	1000	-
19.11.4.7(Harmonics)	-	25000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	25000	-
19.11.4.5(Immunity to conducted discharges)	-	25000	-
19.11.4.4(Surge immunity test)	-	25000	-
19.11.4.3(Fast transient bursts)	-	25000	-
19.11.4.2(Radiated fields)	-	25000	-
19.11.4.1(Electrostatic discharges)	-	25000	-
11.8(Temperature rise)	-	10000	-
11.7(Duration corresponding)	-	1000	-
11.6(Combined appliances)	-	25000	-
11.5(Motor-operated appliances)	-	25000	-
11.4(Heating appliances)	-	12000	-
8.1.5(Live parts of built-in appliances)	-	5000	-
18(Endurance)	-	15000	-
17(Overload protection of transformers and associated circuits)	-	7500	-
16(Leakage current and electric strength)	-	5000	-
4(General requirement)	-	5000	-
32.1(Radiation Toxicity and Similar Hazards)	-	10000	-
31(Resistance to Rusting)	-	10000	-
30.2(Needle Flame Test)	-	5000	-
30.2(Glow Wire Test)	-	5000	-
30.1(Ball pressure test)	-	5000	-
29(clearance, creepage distances and solid insulation)	-	5000	-
28(Screw test and connections)	-	5000	-
27.1(Provision for Earthing, IS 302-1)	-	5000	-
26(Terminals for external conductors)	-	5000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
24(Components)	-	5000	-
23.1(Internal Wiring, IS 302-1)	-	1200	-
22.1(Construction, IS 302-1)	-	5000	-
21.1(Mechanical Strength, IS 302-1)	-	1000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
19(Abnormal Operation)	-	2500	-
18(Endurance)	-	5000	-
17(Over Load Protection of Transformers and associated circuits)	-	5000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	5000	-
16.2(Leakage Current (after Clause 15))	-	1500	-
16.1(General)	-	1500	-
16.0(General)	-	1500	-
15.3(Humidity Test)	-	5000	-
15.2(Spillage Test)	-	1500	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	1500	-
15.0(Moisture resistance)	-	1500	-
14(Transient Over Voltages)	-	1500	-
13.3(Electric Strength at operating temperature)	-	1500	-
13.2(Leakage current at operating temperature)	-	1500	-
13(Leakage current and electric strength at operating temperature)	-	1500	-
11.3(Heating)	-	5000	-
11.2(General)	-	1500	-
11.1(General)	-	1500	-
10.2(Current input)	-	1500	-
10.1(Power input)	-	1500	-
9(Starting of motor operation test requirements and tests)	-	1500	-
8.1.4(Protection against live parts against protective impedance)	-	1500	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	1500	-
8.1.2(Protection against live parts in openings)	-	1500	-
8.1.1(Protection against live parts in all positions)	-	1500	-
7(Marking and instructions)	-	1500	-
A.2(Earth continuity test)	-	1500	-
Annex C(Ageing test on motors)	-	1500	-
Annex D(Thermal motor protectors)	-	1500	-
15.2(Moisture resistance)	-	1500	-
19.17(Abnormal Operation, IS 302-1)	-	1500	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	1500	-
21.2(Mechanical Strength, IS 302-1)	-	1500	-
21.3(Mechanical Strength, IS 302-1)	-	1500	-
22.5(Construction)	-	1500	-
22.6(Construction, IS 302-1)	-	1500	-
22.11(Construction, IS 302-1)	-	1500	-
22.16(Construction)	-	1500	-
22.32(Construction, IS 302-1)	-	1500	-
22.42(Construction)	-	1500	-
23.3(Internal Wiring, IS 302-1)	-	1500	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	1500	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	1500	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1500	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	1500	-
26.5(Terminals for external conductors)	-	1500	-
27.5(Provision for Earthing, IS 302-1)	-	1500	-
28.1(Screws and connections)	-	1500	-
22.2(Construction, IS 302-1)	-	1500	-
22.3(Construction, IS 302-1)	-	1500	-
B.22.4(Construction, IS 302-1)	-	1500	-
B.22.5(Construction, IS 302-1)	-	1500	-
12(Charging of metal-ion batteries)	-	-	-
6(Classification- IS 302-1)	-	-	-
5(General conditions for the tests)	-	-	-
19.11.4.7(Harmonics)	-	-	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	-	-
19.11.4.5(Immunity to conducted discharges)	-	-	-
19.11.4.4(Surge immunity test)	-	-	-
19.11.4.3(Fast transient bursts)	-	-	-
19.11.4.2(Radiated fields)	-	-	-
19.11.4.1(Electrostatic discharges)	-	-	-
11.8(Temperature rise)	-	-	-
11.7(Duration corresponding)	-	-	-
11.6(Combined appliances)	-	-	-
11.5(Motor-operated appliances)	-	-	-
11.4(Heating appliances)	-	-	-
8.1.5(Live parts of built-in appliances)	-	-	-
18(Endurance)	-	-	-
17(Overload protection of transformers and associated circuits)	-	-	-
16(Leakage current and electric strength)	-	-	-
4(General requirement)	-	-	-
32.1(Radiation Toxicity and Similar Hazards)	-	-	-
31(Resistance to Rusting)	-	-	-
30.2(Needle Flame Test)	-	-	-
30.2(Glow Wire Test)	-	-	-
30.1(Ball pressure test)	-	-	-
29(clearance, creepage distances and solid insulation)	-	-	-
28(Screw test and connections)	-	-	-
27.1(Provision for Earthing, IS 302-1)	-	-	-
26(Terminals for external conductors)	-	-	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
24(Components)	-	-	-
23.1(Internal Wiring, IS 302-1)	-	-	-
22.1(Construction, IS 302-1)	-	-	-
21.1(Mechanical Strength, IS 302-1)	-	-	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	-	-
19(Abnormal Operation)	-	-	-
18(Endurance)	-	-	-
17(Over Load Protection of Transformers and associated circuits)	-	-	-
16.3(Electric Strength (after clause 15 and 16.2))	-	-	-
16.2(Leakage Current (after Clause 15))	-	-	-
16.1(General)	-	-	-
16.0(General)	-	-	-
15.3(Humidity Test)	-	-	-
15.2(Spillage Test)	-	-	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	-	-
15.0(Moisture resistance)	-	-	-
14(Transient Over Voltages)	-	-	-
13.3(Electric Strength at operating temperature)	-	-	-
13.2(Leakage current at operating temperature)	-	-	-
13(Leakage current and electric strength at operating temperature)	-	-	-
11.3(Heating)	-	-	-
11.2(General)	-	-	-
11.1(General)	-	-	-
10.2(Current input)	-	-	-
10.1(Power input)	-	-	-
9(Starting of motor operation test requirements and tests)	-	-	-
8.1.4(Protection against live parts against protective impedance)	-	-	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	-	-
8.1.2(Protection against live parts in openings)	-	-	-
8.1.1(Protection against live parts in all positions)	-	-	-
7(Marking and instructions)	-	-	-
A.2(Earth continuity test)	-	-	-
Annex C(Ageing test on motors)	-	-	-
Annex D(Thermal motor protectors)	-	-	-
15.2(Moisture resistance)	-	-	-
19.17(Abnormal Operation, IS 302-1)	-	-	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	-	-
21.2(Mechanical Strength, IS 302-1)	-	-	-
21.3(Mechanical Strength, IS 302-1)	-	-	-
22.5(Construction)	-	-	-
22.6(Construction, IS 302-1)	-	-	-
22.11(Construction, IS 302-1)	-	-	-
22.16(Construction)	-	-	-
22.32(Construction, IS 302-1)	-	-	-
22.42(Construction)	-	-	-
23.3(Internal Wiring, IS 302-1)	-	-	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	-	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
26.5(Terminals for external conductors)	-	-	-
27.5(Provision for Earthing, IS 302-1)	-	-	-
28.1(Screws and connections)	-	-	-
22.2(Construction, IS 302-1)	-	-	-
22.3(Construction, IS 302-1)	-	-	-
B.22.4(Construction, IS 302-1)	-	-	-
B.22.5(Construction, IS 302-1)	-	-	-

14 Nov, 2027

-
Included.w.e.f.16.01.2025 Exclusion Cl 19.11.4.1 to 19.11.4.7 (EMI/EMC)

IS 16544 (2016)

All glass evacuated tubes solar water heating system

All

75000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Pre-Conditioning Test)	-	10000	-
6.2.1 (Annex - B)(Exterior Test)	-	10000	-
6.2.2 (Annex - C)(Leakage Test)	-	5000	-
6.2.3 (Annex - D)(Stagnation Test)	-	5000	-
6.2.4 (Annex - E)(External Thermal Shock Test)	-	5000	-
6.2.5 (Annex - F)(Internal Thermal Shock Test)	-	10000	-
6.2.6(Thermal Performance Test)	-	10000	-
6.2.7()	-	10000	-
5(General Requirements)	-	1000	-
6.1(Pre-Conditioning Test)	-	10000	-
6.2.1 (Annex - B)(Exterior Test)	-	10000	-
6.2.2 (Annex - C)(Leakage Test)	-	5000	-
6.2.3 (Annex - D)(Stagnation Test)	-	5000	-
6.2.4 (Annex - E)(External Thermal Shock Test)	-	5000	-
6.2.5 (Annex - F)(Internal Thermal Shock Test)	-	10000	-
6.2.6(Thermal Performance Test)	-	10000	-
6.2.7()	-	10000	-
5(General Requirements)	-	5000	-
6.1(Pre-Conditioning Test)	-	10000	-
6.2.1 (Annex - B)(Exterior Test)	-	10000	-
6.2.2 (Annex - C)(Leakage Test)	-	5000	-
6.2.3 (Annex - D)(Stagnation Test)	-	10000	-
6.2.4 (Annex - E)(External Thermal Shock Test)	-	10000	-
6.2.5 (Annex - F)(Internal Thermal Shock Test)	-	10000	-
6.2.6(Thermal Performance Test)	-	10000	-
6.2.7()	-	10000	-
5(General Requirements)	-	5000	-

14 Nov, 2027

-
Included w.e.f 04.03.2025

IS 16270 (2023)

Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

750000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Photovoltaic Energy System)	-	25000	-
Cl-4.2(Secondary Cells and Batteries)	-	25000	-
Cl-4.3(General Operating Conditions)	-	25000	-
Cl-4.3.8(Storage)	-	50000	-
Cl-4.3.9(Operating Temperature)	-	50000	-
Cl-5.1(Mechanical Endurance)	-	50000	-
Cl-5.2(Charge Efficiency)	-	25000	-
Cl-5.3(Deep Discharge Protection)	-	25000	-
Cl-5.4(Marking)	-	25000	-
Cl-5.5(Safety)	-	25000	-
Cl-5.6(Documentation)	-	25000	-
Cl-6(Functional characteristice)	-	25000	-
Cl-7(General test conditions)	-	25000	-
Cl-8.1(Capacity Test)	-	90000	-
Cl-8.2(Endurance Test)	-	500000	-
Cl-8.3(Charge Retention Test)	-	250000	-
Cl-8.4(Cycle Endurance in Photovoltaic Application (Extreme Conditions))	-	400000	-
Cl-8.5(Sulphation Test (Applicable for Lead Acid Batteries only))	-	60000	-
Cl-8.6(Water Loss Test (Valid for Flooded Lead Acid Batteries only))	-	150000	-
Cl-9.1(Type Tests)	-	750000	-
Cl-9.2(Acceptance Test)	-	100000	-
4.3.7.1(Specific gravity)	-	50000	-

14 Nov, 2027

-
Included w.e.f 04.03.2025

IS 2553 : Part 3 (2019)

Safety glass - Specification: Part 3 solar applications

100000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Raw Material)	-	5000	-
4.2 & 6(Dimensions)	-	15000	-
4.2 & 6(Squareness)	-	25000	-
4.2 & 6(Flatness)	-	25000	-
4.2 & 6(Fragmentation)	-	25000	-
4.2 & 6(Resistance to Shock (Ball Drop))	-	25000	-
4.2 & 6(Mechanical Strength)	-	35000	-
4.2 & 6(Hail Strength)	-	40000	-
5.2(Marking)	-	5000	-
As per Clause 6, Table 5(Solar Glas)	-	10000	-
4.1(Raw Material)	-	-	-
4.2 & 6(Dimensions)	-	-	-
4.2 & 6(Squareness)	-	-	-
4.2 & 6(Flatness)	-	-	-
4.2 & 6(Fragmentation)	-	-	-
4.2 & 6(Resistance to Shock (Ball Drop))	-	-	-
4.2 & 6(Mechanical Strength)	-	-	-
4.2 & 6(Hail Strength)	-	-	-
5.2(Marking)	-	-	-
As per Clause 6, Table 5(Solar Glas)	-	-	-

14 Nov, 2027

-
Included w.e.f. 06.01.2025

IS 374 (2019)

Specification for electric ceiling type fans and regulators (Third Revision)

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	1000	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	1000	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	1000	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	1000	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	1000	-
8.1,a(Marking )	-	500	-
8.1,b(Marking )	-	500	-
8.1,c(Marking )	-	500	-
8.1,d(Marking )	-	500	-
8.1,e(Marking )	-	500	-
8.1,f(Marking )	-	500	-
8.1,g(Marking )	-	500	-
8.2(Marking )	-	500	-
8.3,a(Marking )	-	500	-
8.3,b(Marking )	-	500	-
8.3,c(Marking )	-	500	-
8.3,d(Marking )	-	500	-
8.3,e(Marking )	-	500	-
8.4(Marking )	-	500	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	500	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	500	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	500	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	500	-
6.2(Rating)	-	500	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	1500	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	2500	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	4500	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	4500	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	4500	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	4500	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	4000	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	4000	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	2500	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	4500	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	4500	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	4500	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	4500	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	4500	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	4500	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	4500	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	4500	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	3500	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	3500	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	4000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	4000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	4000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	4000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	4000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	4000	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	4000	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	3000	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	3000	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	3000	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	2500	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	2500	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	2500	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	3000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	3500	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	3500	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	3500	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	3000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	1000	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	1000	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	1000	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	1000	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	1500	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	1500	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	1500	-
10.1(Speed Regulators)	-	1500	-
10.2(Speed Regulators)	-	1500	-
10.2(Speed Regulators)	-	1500	-
10.2(Speed Regulators)	-	1500	-
10.3(Speed Regulators)	-	1500	-
10.4(Speed Regulators)	-	500	-
10.5(Speed Regulators)	-	500	-
10.6(Speed Regulators)	-	500	-
10.7(Speed Regulators)	-	500	-
10.7(Speed Regulators)	-	500	-
10.8(Speed Regulators)	-	500	-
11.1(Starting)	-	1200	-
11.2(Starting)	-	1200	-
12(Interchangeability)	-	1200	-
13(Silent Operation)	-	1500	-
14.3 & Table 1(Test for Air Performance)	-	1500	-
14.3 & Table 1(Test for Air Performance)	-	10000	-
14.4(Measurement of Speed of the Fan )	-	10000	-
14.4(Measurement of Speed of the Fan )	-	10000	-
14.5(Measurement of Power factor and Power Input)	-	10000	-
14.5(Measurement of Power factor and Power Input)	-	10000	-
16(Endurance Test)	-	10000	-
16(Endurance Test)	-	10000	-
16(Endurance Test)	-	10000	-
16(Endurance Test)	-	10000	-
16(Endurance Test)	-	10000	-
16(Endurance Test)	-	10000	-
17(Test for Harmonic Distortion)	-	10000	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	1199.99	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	1200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	1200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	1200	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	500	`
8.1,a(Marking )	-	500	-
8.1,b(Marking )	-	500	-
8.1,c(Marking )	-	500	-
8.1,d(Marking )	-	500	-
8.1,e(Marking )	-	500	-
8.1,f(Marking )	-	500	-
8.1,g(Marking )	-	500	-
8.2(Marking )	-	500	-
8.3(Marking )	-	500	-
8.3,a(Marking )	-	500	-
8.3,b(Marking )	-	500	-
8.3,c(Marking )	-	500	-
8.3,d(Marking )	-	500	-
8.3,e(Marking )	-	500	-
8.4(Marking )	-	500	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	500	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	500	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	500	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	500	-
6.2(Rating)	-	500	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	5000	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	5000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	5000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	5000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	5000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	5000	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	5000	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	5000	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	5000	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	5000	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	5000	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	5000	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	5000	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	5000	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	5000	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	5000	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	5000	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	5000	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	5000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	5000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	5000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	5000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	5000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	5000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	5000	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	5000	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	5000	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	5000	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	5000	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	5000	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	5000	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	5000	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	5000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	5000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	5000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	5000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	5000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	5000	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	5000	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	5000	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	5000	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	5000	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	5000	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	5000	-
10.1(Speed Regulators)	-	5000	-
10.2(Speed Regulators)	-	5000	-
10.2(Speed Regulators)	-	5000	-
10.2(Speed Regulators)	-	5000	-
10.3(Speed Regulators)	-	5000	-
10.4(Speed Regulators)	-	5000	-
10.5(Speed Regulators)	-	5000	-
10.6(Speed Regulators)	-	5000	-
10.7(Speed Regulators)	-	5000	-
10.7(Speed Regulators)	-	5000	-
10.8(Speed Regulators)	-	5000	-
11.1(Starting)	-	5000	-
11.2(Starting)	-	5000	-
12(Interchangeability)	-	5000	-
13(Silent Operation)	-	5000	-
14.3 & Table 1(Test for Air Performance)	-	5000	-
14.3 & Table 1(Test for Air Performance)	-	5000	-
14.4(Measurement of Speed of the Fan )	-	5000	-
14.4(Measurement of Speed of the Fan )	-	5000	-
14.5(Measurement of Power factor and Power Input)	-	5000	-
14.5(Measurement of Power factor and Power Input)	-	5000	-
16(Endurance Test)	-	5000	-
16(Endurance Test)	-	5000	-
16(Endurance Test)	-	5000	-
16(Endurance Test)	-	5000	-
16(Endurance Test)	-	5000	-
16(Endurance Test)	-	5000	-
17(Test for Harmonic Distortion)	-	5000	-
4(GENERAL REQUIREMENTS)	-	5000	-
5(GENERAL NOTES ON TESTS)	-	5000	-
15.1, 15.2(Air delivery and service value)	-	5000	-
Cl-9 (Cl-19.101 of IS 302-1)(Abnormal Operation)	-	0	-
(Cl. 17 of IS 302-2-80 :2017)(Overload protection of transformers and associated circuits)	-	0	-
(Cl.4.4 of IS 374: 2019)(Bearings)	-	0	-
(Cl. 4.5 of IS 374: 2019)(Brushless DC Motor)	-	0	-
(Cl.4.6 of IS 374: 2019)(Enclosure)	-	0	-
(Cl. 7.6 of IS 302 Part 1)(Marking and Instructions)	-	0	-
Cl. 7.8 of IS 302-2-80 :2017(MARKING AND INSTRUCTIONS)	-	0	-
(Cl. 7.12 of IS 302-2-80 :2017)(Marking and Instructions)	-	0	-
(Cl. 7.12.1 of IS 302-2-80 :2017)(Marking and Instructions)	-	0	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 7.12.7 of IS 302-1: 2008(Marking and Instructions)	-	0	-
(Cl. 7.13 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 7.14 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 10.1 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.3 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.4 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.7 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.7 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.8 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 11.2 of IS 374: 2019)(STARTING)	-	0	-
(Cl. 13 of IS 374: 2019)(SILENT OPERATION)	-	0	-
(Cl. 15.1 of IS 374: 2019)(PERFORMANCE REQUIREMENTS)	-	0	-
(Cl. 15.1 of IS 374: 2019)(PERFORMANCE REQUIREMENTS)	-	0	-
(Cl. 17 of IS 374: 2019(Test for Harmonic Distortion)	-	0	-
(Cl. 8.2 of IS 302-1: 2008)(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	0	-
(Cl. 11 of IS 302-1: 2008)(HEATING)	-	0	-
(Cl. 15 of IS 302-1: 2008)(MOISTURE RESISTANCE)	-	0	-
(Cl. 15 of IS 302-1: 2008)(MOISTURE RESISTANCE)	-	0	-
(Cl. 15 of IS 302-1: 2008.(MOISTURE RESISTANCE)	-	0	-
(Cl. 17 of IS 302-1: 2008)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	0	-
(Cl. 17 of IS 302-1: 2008)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.7 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19 of IS 302-2-80 :2017)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 20.102 of IS 302-2-80 :2017)(STABILITY AND MECHANICAL HAZARDS)	-	0	-
(Cl. 22.2 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.14 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.18 of IS 302-1: 2008)(Electric Ceiling type fan-Specification)	-	0	-
(Cl. 22.21 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.22 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.41 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.44 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.101 of IS 302-2-80: 2017)(CONSTRUCTION)	-	0	-
(Cl. 23.1 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.2 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.4 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.5 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.6 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.7 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.9 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.10 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 24.1 of IS 302-1: 2008)(COMPONENTS)	-	0	-
(Cl. 24.5 of IS 302-1: 2008)(COMPONENTS)	-	0	-
(Cl. 24.105 of IS IS 302-2-80 :2017)(COMPONENTS)	-	0	-
(Cl. 26.1 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
(Cl. 26.8 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
(Cl. 26.9 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
(Cl. 26.10 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
(Cl. 27.1 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	0	-
(Cl. 27.2 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	0	-
(Cl. 27.4 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	0	-
(Cl. 27.5 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	0	-
(Cl. 28.4 of IS 302-1: 2008)(SCREWS AND CONNECTIONS)	-	0	-
(Cl. 30.2 of IS 302-1: 2008)(RESISTANCE TO HEAT AND FIRE)	-	0	-
(Cl. 30.2 of IS 302-1: 2008)(RESISTANCE TO HEAT AND FIRE)	-	0	-
(Cl. 32 of IS 302-1: 2008)(Radiation, toxicity and similar hazards)	-	0	-

14 Nov, 2027

-
-

IS 302 : Part 2 : Sec 21 (2024)

Household and Similar Electrical Appliancesï¿½Safety Part 2 Particular Requirements Section 21 Storage Water Heaters

31500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General requirement)	-	5000	-
5(General conditions for the tests)	-	5000	-
6(Classification)	-	5000	-
7(Marking and instructions)	-	5000	-
8(Protection against access to live parts)	-	5000	-
9(Starting of motor-operated appliances)	-	0	-
10(Power input and current)	-	10000	-
11(Heating)	-	10000	-
13(Leakage current and electric strength at operating temperature)	-	8000	-
14(Transient overvoltages)	-	15000	-
15(Moisture resistance)	-	15000	-
16(Leakage current and electric strength)	-	8000	-
17(Overload protection of transformers and associated circuits)	-	8000	-
18(Endurance)	-	0	-
19(Abnormal operation)	-	10000	-
20(Stability and mechanical hazards)	-	8000	-
21(Mechanical strength)	-	8000	-
22(Construction)	-	8000	-
23(Internal wiring)	-	8000	-
24(Components)	-	8000	-
25(Supply connection and external flexible cords)	-	5000	-
26(Terminals for external conductors)	-	8000	-
27(Provision for earthing)	-	8000	-
28(Screws and connections)	-	8000	-
29(Clearances, creepage distances and solid insulation)	-	8000	-
30(Resistance to heat and fire)	-	8000	-
31(Resistance to rusting)	-	5000	-
A.101(Pressure test)	-	5000	-
32(Radiation, toxicity and similar hazards)	-	5000	-
4(General requirement)	-	5000	-
5(General conditions for the tests)	-	5000	-
6(Classification)	-	5000	-
7(Marking and instructions)	-	5000	-
8(Protection against access to live parts)	-	5000	-
9(Starting of motor-operated appliances)	-	0	-
10(Power input and current)	-	10000	-
11(Heating)	-	10000	-
13(Leakage current and electric strength at operating temperature)	-	8000	-
14(Transient overvoltages)	-	15000	-
15(Moisture resistance)	-	15000	-
16(Leakage current and electric strength)	-	8000	-
17(Overload protection of transformers and associated circuits)	-	8000	-
18(Endurance)	-	0	-
19(Abnormal operation)	-	10000	-
20(Stability and mechanical hazards)	-	8000	-
21(Mechanical strength)	-	8000	-
22(Construction)	-	8000	-
23(Internal wiring)	-	8000	-
24(Components)	-	8000	-
25(Supply connection and external flexible cords)	-	5000	-
26(Terminals for external conductors)	-	8000	-
27(Provision for earthing)	-	8000	-
28(Screws and connections)	-	8000	-
29(Clearances, creepage distances and solid insulation)	-	8000	-
30(Resistance to heat and fire)	-	8000	-
31(Resistance to rusting)	-	5000	-
A.101(Pressure test)	-	5000	-
32(Radiation, toxicity and similar hazards)	-	5000	-

14 Nov, 2027

-
Exclusion: Cl 19.11.4.1 - 19.11.4.7 (EMI/EMC)

IS 11951 (2024)

PUMPSET FOR DIRECT EVAPORATIVE AIR COOLER â SPECIFICATION (Second Revision)

47000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Non-Submersible Pumpset)	-	15000	-
5.1.2(Submersible Pumpset)	-	15000	-
6.1, 7.3, 9.1, 9.4.2, Table-1(Discharge Head, m)	-	15000	-
6.1, 7.3, 9.1, 9.4.2,Table-1(Minimum Discharge, l/min)	-	15000	-
6.1, 7.3, 9.1, 9.4.2, Table-1(Type 1 Motor Wattage)	-	5000	-
6.1, 7.3, 9.1, 9.4.2, Table-1(Type 2 Motor Wattage)	-	12000	-
6.1, 7.3, 9.1, 9.4.2, Table-2(Motor Wattage)	-	12000	-
6.1, 7.3, 9.1,9.4.2, Table-2(Minimum Discharge Head, Hd)	-	15000	-
6.1, 7.3, 9.1, 9.4.2,Table-2(Discharge Measurement Height, h)	-	12000	-
6.1, 7.3, 9.1, 9.4.2, Table-2(Minimum, Discharge*)	-	12000	-
Cl-8(GENERAL REQUIREMENTS)	-	5000	-
9.2(Tests on motor)	-	25000	-
9.3(Water Requirement)	-	5000	-
9.4.1(Reliability Tests)	-	40000	-
9.4.3(Ingress protection test)	-	20000	-
9.4.6(Dry Run Test)	-	18000	-
9.5(Routine Test)	-	25000	-
9.6(Type Test)	-	30000	-
9.7(Leakage current and electric strength at operating temperature)	-	8000	-
9.7(Moisture resistance)	-	15000	-
9.7(Leakage current and electric strength)	-	8000	-

14 Nov, 2027

-
-

IS 2993 : Part 2 (2024)

a.c. Motor Capacitors Part 2 Motor Start Capacitors ( Third Revision )

348500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1.1(General)	-	4000	-
5.1.7(Voltage test between the terminals)	-	9000	-
5.1.8(Voltage test between terminals and case)	-	9000	-
5.1.9(Capacitance measurement)	-	231500	-
5.1.10(Check of dimensions)	-	4000	-
5.1.10(Check of dimensions)	-	4000	-
5.1.11.1(Robustness of terminations)	-	46000	-
5.1.11.2(Soldering)	-	10000	-
5.1.11.3(Vibration)	-	31500	-
5.1.12(Sealing test)	-	9000	-
5.1.13(Endurance test)	-	105000	-
5.1.14(Damp heat test)	-	76000	-
5.1.15(Self-healing test)	-	11000	-
5.1.16(Destruction test)	-	44000	-
5.1.17.1(Ball-pressure test)	-	5000	-
5.1.17.2(Glow-wire test)	-	5000	-
5.1.17.3(Tracking test)	-	5000	-
5.2(Overloads)	-	10000	-
5.3.1(Creepage distances and clearances)	-	10000	-
5.3.2(Terminals and connecting cables)	-	10000	-
5.3.3(Earth connections)	-	10000	-
5.3.4(Discharge devices)	-	10000	-
5.3.5(Pollution)	-	10000	-
5.4(Marking)	-	4000	-
6.1.6(Voltage test between the terminals)	-	10000	-
6.1.7(Voltage test between terminals and case)	-	10000	-
6.1.8(Capacitance and power factor measurement)	-	15000	-
6.1.9(Check of dimensions)	-	5000	-
6.1.10.1(Robustness of terminations)	-	40000	-
6.1.10.2(Soldering)	-	5000	-
6.1.10.3(Vibration)	-	25000	-
6.1.10.4(Fixing bolt or stud (if fitted))	-	1500	-
6.1.10.4(Fixing bolt or stud (if fitted))	-	25000	-
6.1.10.5(Rapid change of temperature)	-	35000	-
6.1.11(Sealing test)	-	14999.96	-
6.1.12(Endurance test)	-	107999.96	-
6.1.13(Damp heat test)	-	76000	-
6.1.14(Pressure relief test)	-	75000	-
6.1.15.1(Ball-pressure test)	-	5000	-
6.1.15.2(Glow-wire test)	-	10000	-
6.1.15.3(Tracking test)	-	10000	-
6.2(Overloads)	-	5000	-
6.3.1(Creepage distances and clearances)	-	5000	-
6.3.2(Terminals and connecting cables)	-	10000	-
6.3.3(Earth connections)	-	10000	-
6.3.4(Discharge devices)	-	5000	-
6.3.5(Pollution)	-	5000	-
6.4(Marking)	-	5000	-
7.2.1(Measurement of working voltage)	-	10000	-
7.2.2(Influence of capacitance)	-	4000	-
7.3(Checking capacitor temperature)	-	2000	-
7.4(Checking transients)	-	5000	-
7.5(Storage of electrolytic capacitors)	-	10000	-
Annex A(Test voltage)	-	10000	-
5.1.1.1(General)	-	5000	-
5.1.7(Voltage test between the terminals)	-	10000	-
5.1.8(Voltage test between terminals and case)	-	10000	-
5.1.9(Capacitance measurement)	-	231500	-
5.1.10(Check of dimensions)	-	10000	-
5.1.10(Check of dimensions)	-	10000	-
5.1.11.1(Robustness of terminations)	-	10000	-
5.1.11.2(Soldering)	-	10000	-
5.1.11.3(Vibration)	-	55000	-
5.1.12(Sealing test)	-	55000	-
5.1.13(Endurance test)	-	105000	-
5.1.14(Damp heat test)	-	76000	-
5.1.15(Self-healing test)	-	5000	-
5.1.16(Destruction test)	-	10000	-
5.1.17.1(Ball-pressure test)	-	10000	-
5.1.17.2(Glow-wire test)	-	10000	-
5.1.17.3(Tracking test)	-	10000	-
5.2(Overloads)	-	1000	-
5.3.1(Creepage distances and clearances)	-	10000	-
5.3.2(Terminals and connecting cables)	-	10000	-
5.3.3(Earth connections)	-	10000	-
5.3.4(Discharge devices)	-	10000	-
5.3.5(Pollution)	-	5000	-
5.4(Marking)	-	4000	-
6.1.6(Voltage test between the terminals)	-	5000	-
6.1.7(Voltage test between terminals and case)	-	5000	-
6.1.8(Capacitance and power factor measurement)	-	75000	-
6.1.9(Check of dimensions)	-	5000	-
6.1.10.1(Robustness of terminations)	-	10000	-
6.1.10.2(Soldering)	-	10000	-
6.1.10.3(Vibration)	-	55000	-
6.1.10.4(Fixing bolt or stud (if fitted))	-	10000	-
6.1.10.4(Fixing bolt or stud (if fitted))	-	10000	-
6.1.10.5(Rapid change of temperature)	-	35000	-
6.1.11(Sealing test)	-	25000	-
6.1.12(Endurance test)	-	231500	-
6.1.13(Damp heat test)	-	86000	-
6.1.14(Pressure relief test)	-	25000	-
6.1.15.1(Ball-pressure test)	-	10000	-
6.1.15.2(Glow-wire test)	-	10000	-
6.1.15.3(Tracking test)	-	10000	-
6.2(Overloads)	-	5000	-
6.3.1(Creepage distances and clearances)	-	10000	-
6.3.2(Terminals and connecting cables)	-	10000	-
6.3.3(Earth connections)	-	10000	-
6.3.4(Discharge devices)	-	10000	-
6.3.5(Pollution)	-	5000	-
6.4(Marking)	-	5000	-
7.2.1(Measurement of working voltage)	-	5000	-
7.2.2(Influence of capacitance)	-	5000	-
7.3(Checking capacitor temperature)	-	5000	-
7.4(Checking transients)	-	5000	-
7.5(Storage of electrolytic capacitors)	-	10000	-
Annex A(Test voltage)	-	100000	-
5.1.1.1(General)	-	-	-
5.1.7(Voltage test between the terminals)	-	-	-
5.1.8(Voltage test between terminals and case)	-	-	-
5.1.9(Capacitance measurement)	-	-	-
5.1.10(Check of dimensions)	-	-	-
5.1.10(Check of dimensions)	-	-	-
5.1.11.1(Robustness of terminations)	-	-	-
5.1.11.2(Soldering)	-	-	-
5.1.11.3(Vibration)	-	-	-
5.1.12(Sealing test)	-	-	-
5.1.13(Endurance test)	-	-	-
5.1.14(Damp heat test)	-	-	-
5.1.15(Self-healing test)	-	-	-
5.1.16(Destruction test)	-	-	-
5.1.17.1(Ball-pressure test)	-	-	-
5.1.17.2(Glow-wire test)	-	-	-
5.1.17.3(Tracking test)	-	-	-
5.2(Overloads)	-	-	-
5.3.1(Creepage distances and clearances)	-	-	-
5.3.2(Terminals and connecting cables)	-	-	-
5.3.3(Earth connections)	-	-	-
5.3.4(Discharge devices)	-	-	-
5.3.5(Pollution)	-	-	-
5.4(Marking)	-	-	-
6.1.6(Voltage test between the terminals)	-	-	-
6.1.7(Voltage test between terminals and case)	-	-	-
6.1.8(Capacitance and power factor measurement)	-	-	-
6.1.9(Check of dimensions)	-	-	-
6.1.10.1(Robustness of terminations)	-	-	-
6.1.10.2(Soldering)	-	-	-
6.1.10.3(Vibration)	-	-	-
6.1.10.4(Fixing bolt or stud (if fitted))	-	-	-
6.1.10.4(Fixing bolt or stud (if fitted))	-	-	-
6.1.10.5(Rapid change of temperature)	-	-	-
6.1.11(Sealing test)	-	-	-
6.1.12(Endurance test)	-	-	-
6.1.13(Damp heat test)	-	-	-
6.1.14(Pressure relief test)	-	-	-
6.1.15.1(Ball-pressure test)	-	-	-
6.1.15.2(Glow-wire test)	-	-	-
6.1.15.3(Tracking test)	-	-	-
6.2(Overloads)	-	-	-
6.3.1(Creepage distances and clearances)	-	-	-
6.3.2(Terminals and connecting cables)	-	-	-
6.3.3(Earth connections)	-	-	-
6.3.4(Discharge devices)	-	-	-
6.3.5(Pollution)	-	-	-
6.4(Marking)	-	-	-
7.2.1(Measurement of working voltage)	-	-	-
7.2.2(Influence of capacitance)	-	-	-
7.3(Checking capacitor temperature)	-	-	-
7.4(Checking transients)	-	-	-
7.5(Storage of electrolytic capacitors)	-	-	-
Annex A(Test voltage)	-	-	-

14 Nov, 2027

-
Included w.e.f. 09.11.2024

IS 13340 : PART 1 (2012)

Shunt power capacitors of the self - Healing type for AC systems having a rated voltage up to and including 1000 V: Part 1 general - Performance, testing and rating - Safety requirements - Guide for installation and operation (First Revision)

185000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
27(Marking of the Bank)	-	2000	-
26(Marking of the Unit)	-	2000	-
25(Other Safety Requirements)	-	10000	-
24(Protection of the Environment)	-	10000	-
23(Container Connections)	-	15000	-
22(Discharge Device)	-	35000	-
21(Maximum Permissible Current)	-	25000	-
20 &Table 3 - Admissible voltage levels in service(Maximum Permissible Voltage)	-	25000	-
19 & IEC 60831-2(Destruction Test)	-	25000	-
18 & IEC 60831-2(Self-Healing Test)	-	25000	-
17 & IEC 60831-2(Ageing Test)	-	25000	-
16(Discharge Test)	-	25000	-
15(Lightning impulse voltage test between terminals and container)	-	25000	-
14(Measurement of the tangent of the loss angle (tan δ) of the capacitor at elevated temperature)	-	25000	-
13 & Table 2-Ambient air temperature for the thermal stability test(Thermal Stability Test)	-	22000	-
12(Sealing Test)	-	25000	-
11(Test of Internal Discharge Device)	-	25000	-
10.2(Voltage test between terminals and container)	-	25000	-
10.1(Voltage test between terminals and container)	-	25000	-
9.2(Voltage test between terminals)	-	25000	-
9.1(Voltage test between terminals)	-	25000	-
8(Measurement of the tangent of the loss angle (tan δ) of the capacitor)	-	25000	-
7(Capacitance Measurement and Output Calculation)	-	25000	-
27(Marking of the Bank)	-	2000	-
26(Marking of the Unit)	-	2000	-
25(Other Safety Requirements)	-	10000	-
24(Protection of the Environment)	-	10000	-
23(Container Connections)	-	25000	-
22(Discharge Device)	-	35000	-
21(Maximum Permissible Current)	-	35000	-
20 &Table 3 - Admissible voltage levels in service(Maximum Permissible Voltage)	-	35000	-
19 & IEC 60831-2(Destruction Test)	-	25000	-
18 & IEC 60831-2(Self-Healing Test)	-	25000	-
17 & IEC 60831-2(Ageing Test)	-	25000	-
16(Discharge Test)	-	25000	-
15(Lightning impulse voltage test between terminals and container)	-	25000	-
14(Measurement of the tangent of the loss angle (tan δ) of the capacitor at elevated temperature)	-	25000	-
13 & Table 2-Ambient air temperature for the thermal stability test(Thermal Stability Test)	-	25000	-
12(Sealing Test)	-	25000	-
11(Test of Internal Discharge Device)	-	25000	-
10.2(Voltage test between terminals and container)	-	25000	-
10.1(Voltage test between terminals and container)	-	25000	-
9.2(Voltage test between terminals)	-	25000	-
9.1(Voltage test between terminals)	-	25000	-
8(Measurement of the tangent of the loss angle (tan δ) of the capacitor)	-	25000	-
7(Capacitance Measurement and Output Calculation)	-	25000	-

14 Nov, 2027

-
Included w.e.f. 09.11.2024

IS 302 : Part 2 : Sec 75 (2018)

Safety of Household and Similar Electrical Appliances Part 2 Particular Requirements Section 75 Commercial Dispensing Appliances and Vending Machines

31500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
32(Radiation, toxicity and similar hazards)	-	5000	-
31(Resistance to rusting)	-	5000	-
30.2.4(Resistance to heat and fire)	-	5000	-
30.2(Resistance to heat and fire)	-	5000	-
30.1(Resistance to heat and fire)	-	5000	-
29.3(Clearances, creepage distances and solid insulation)	-	5000	-
29.2(Clearances, creepage distances and solid insulation)	-	5000	-
29.2(Clearances, creepage distances and solid insulation)	-	5000	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	5000	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	5000	-
28.2 to 28.4(Screws and connections)	-	5000	-
28.1, Table No.-14(Screws and connections)	-	5000	-
27.6(Provision for earthing)	-	5000	-
27.5(Provision for earthing)	-	5000	-
27.1 to 27.4(Provision for earthing)	-	5000	-
26.10 & 26.11(Terminals for external conductors)	-	5000	-
26.9(Terminals for external conductors)	-	5000	-
26.1 to 26.8(Terminals for external conductors)	-	5000	-
25.16 to 25.25(Supply connection and external flexible cords)	-	5000	-
25.15(Supply connection and external flexible cords)	-	5000	-
25.14(Supply connection and external flexible cords)	-	5000	-
25.9 to 25.13(Supply connection and external flexible cords)	-	5000	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	5000	-
25.5 to 25.7(Supply connection and external flexible cords)	-	5000	-
25.4(Supply connection and external flexible cords)	-	5000	-
25.3(Supply connection and external flexible cords)	-	5000	-
25.2(Supply connection and external flexible cords)	-	5000	-
25.1(Supply connection and external flexible cords)	-	5000	-
24.101 to 24.103(Components)	-	5000	-
24.2 to 24.6(Components)	-	5000	-
24.1(Components)	-	5000	-
23.101 to 23.102(Internal wiring)	-	5000	-
23.6 to 23.10(Internal wiring)	-	5000	-
23.5(Internal wiring)	-	5000	-
23.4(Internal wiring)	-	5000	-
23.3(Internal wiring)	-	5000	-
23.1 & 23.2(Internal wiring)	-	5000	-
22.101 to 22.114(Constructions)	-	15000	-
22.13 to 22.48(Constructions)	-	15000	-
22.12(Constructions)	-	15000	-
22.11(Constructions)	-	15000	-
22.11(Constructions)	-	15000	-
22.7 to 22.10(Constructions)	-	15000	-
22.6(Constructions)	-	15000	-
22.5(Constructions)	-	15000	-
22.4(Constructions)	-	15000	-
22.3(Constructions)	-	15000	-
22.2(Constructions)	-	15000	-
22.1(Constructions)	-	15000	-
21.2(MECHANICAL STRENGTH)	-	25000	-
21.1(MECHANICAL STRENGTH)	-	25000	-
20.2(Stability and mechanical hazards)	-	15000	-
20.1(Stability and mechanical hazards)	-	15000	-
19.101 and 19.102(ABNORMAL OPERATION)	-	10000	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	10000	-
17(Overload protection of transformers and associated circuits)	-	10000	-
16.3(Insulation resistance test)	-	10000	-
16.3(Electric strength test)	-	10000	-
16.1 & 16.2(Leakage current test)	-	10000	-
15.102(Moisture resistance)	-	10000	-
15.102(Moisture resistance)	-	10000	-
15.101(Moisture resistance)	-	10000	-
15.3(Moisture resistance)	-	10000	-
15.2(Moisture resistance)	-	10000	-
15.1(Moisture resistance)	-	10000	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	10000	-
13.3 and Table No.- 4(Electric strength test)	-	10000	-
13.1, 13.2(Leakage current test)	-	10000	-
11.1 to 11.8, Table No.-3(Heating)	-	10000	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	10000	-
8.1.5(Protection against access to live parts)	-	10000	-
8.1.4(Protection against access to live parts)	-	10000	-
8.1.3(Protection against access to live parts)	-	10000	-
8.1.2(Protection against access to live parts)	-	10000	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	10000	-
7.14(Legibility & Durability of Markings test)	-	10000	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	1000	-
32(Radiation, toxicity and similar hazards)	-	10000	-
31(Resistance to rusting)	-	10000	-
30.2.4(Resistance to heat and fire)	-	10000	-
30.2(Resistance to heat and fire)	-	10000	-
30.1(Resistance to heat and fire)	-	10000	-
29.3(Clearances, creepage distances and solid insulation)	-	10000	-
29.2(Clearances, creepage distances and solid insulation)	-	10000	-
29.2(Clearances, creepage distances and solid insulation)	-	10000	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	10000	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	10000	-
28.2 to 28.4(Screws and connections)	-	10000	-
28.1, Table No.-14(Screws and connections)	-	10000	-
27.6(Provision for earthing)	-	10000	-
27.5(Provision for earthing)	-	10000	-
27.1 to 27.4(Provision for earthing)	-	10000	-
26.10 & 26.11(Terminals for external conductors)	-	10000	-
26.9(Terminals for external conductors)	-	10000	-
26.1 to 26.8(Terminals for external conductors)	-	10000	-
25.16 to 25.25(Supply connection and external flexible cords)	-	10000	-
25.15(Supply connection and external flexible cords)	-	10000	-
25.14(Supply connection and external flexible cords)	-	10000	-
25.9 to 25.13(Supply connection and external flexible cords)	-	10000	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	10000	-
25.5 to 25.7(Supply connection and external flexible cords)	-	10000	-
25.4(Supply connection and external flexible cords)	-	10000	-
25.3(Supply connection and external flexible cords)	-	10000	-
25.2(Supply connection and external flexible cords)	-	10000	-
25.1(Supply connection and external flexible cords)	-	10000	-
24.101 to 24.103(Components)	-	10000	-
24.2 to 24.6(Components)	-	10000	-
24.1(Components)	-	10000	-
23.101 to 23.102(Internal wiring)	-	10000	-
23.6 to 23.10(Internal wiring)	-	10000	-
23.5(Internal wiring)	-	10000	-
23.4(Internal wiring)	-	10000	-
23.3(Internal wiring)	-	10000	-
23.1 & 23.2(Internal wiring)	-	10000	-
22.101 to 22.114(Constructions)	-	10000	-
22.13 to 22.48(Constructions)	-	10000	-
22.12(Constructions)	-	10000	-
22.11(Constructions)	-	10000	-
22.11(Constructions)	-	10000	-
22.7 to 22.10(Constructions)	-	10000	-
22.6(Constructions)	-	10000	-
22.5(Constructions)	-	10000	-
22.4(Constructions)	-	10000	-
22.3(Constructions)	-	10000	-
22.2(Constructions)	-	10000	-
22.1(Constructions)	-	10000	-
21.2(MECHANICAL STRENGTH)	-	10000	-
21.1(MECHANICAL STRENGTH)	-	10000	-
20.2(Stability and mechanical hazards)	-	10000	-
20.1(Stability and mechanical hazards)	-	10000	-
19.101 and 19.102(ABNORMAL OPERATION)	-	10000	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	10000	-
17(Overload protection of transformers and associated circuits)	-	10000	-
16.3(Insulation resistance test)	-	10000	-
16.3(Electric strength test)	-	10000	-
16.1 & 16.2(Leakage current test)	-	10000	-
15.102(Moisture resistance)	-	10000	-
15.102(Moisture resistance)	-	10000	-
15.101(Moisture resistance)	-	10000	-
15.3(Moisture resistance)	-	10000	-
15.2(Moisture resistance)	-	10000	-
15.1(Moisture resistance)	-	10000	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	10000	-
13.3 and Table No.- 4(Electric strength test)	-	10000	-
13.1, 13.2(Leakage current test)	-	10000	-
11.1 to 11.8, Table No.-3(Heating)	-	10000	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	10000	-
8.1.5(Protection against access to live parts)	-	10000	-
8.1.4(Protection against access to live parts)	-	10000	-
8.1.3(Protection against access to live parts)	-	10000	-
8.1.2(Protection against access to live parts)	-	10000	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	10000	-
7.14(Legibility & Durability of Markings test)	-	1000	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	1000	-

14 Nov, 2027

-
Exclusion: 19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.4 (Surge immunity test) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Harmonics)

IS 2082 (2018)

Stationary storage type electric water heaters - Specification (Fifth Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	2000	-
7(Marking)	-	2000	-
7(Marking)	-	2000	-
7(Marking)	-	2000	-
7(Marking)	-	2000	-
7(Marking)	-	2000	-
7(Marking)	-	2000	-
7(Marking)	-	2000	-
7(Marking)	-	2000	-
7(Marking)	-	2000	-
7(Marking)	-	2000	-
7(Marking)	-	2000	-
7(Marking)	-	2000	-
7(Marking)	-	2000	-
7(Marking)	-	2000	-
7(Marking)	-	2000	-
7(Marking)	-	2000	-
7(Marking)	-	2000	-
7(Marking)	-	2000	-
7(Marking)	-	2000	-
7(Marking)	-	2000	-
7(Marking)	-	2000	-
7(Marking)	-	2000	-
7(Marking)	-	2000	-
7(Marking)	-	2000	-
7(Marking)	-	2000	-
7(Marking)	-	2000	-
7(Marking)	-	2000	-
6(Classification )	-	2000	-
6(Classification )	-	2000	-
(Cl.8 of IS 302-2-21:2011)(Protection Against Access to Live Parts)	-	2000	-
(Cl.10 of IS 302-2-21: 2011)(Power Input & Current)	-	2000	-
(Cl.11 of 302-2-21:2011)(Heating)	-	2000	-
(Cl.11 of 302-2-21:2011)(Heating)	-	2000	-
(Cl.11 of 302-2-21:2011)(Heating)	-	2000	-
(Cl.13 of IS 302-2-21:2011)(Leakage Current )	-	2000	-
(Cl.13 of IS 302-2-21:2011)(Electrical Strength at Operating Temperature)	-	2000	-
(Cl.14ofIS302-2-21:2011)(Transient Over Voltages)	-	2000	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	2000	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	2000	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	2000	-
(Cl.17 of IS 302-2-21:2011)(Overload protection of transformers & associated circuits)	-	2000	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	2000	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	2000	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	2000	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	2000	-
(Cl.20 of IS 302-2-21:2011)(Stability & Mechanical Hazards)	-	2000	-
(Cl.21ofIS302-2-21:2011)(Mechanical strength)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	2000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	2000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	2000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	2000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	2000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	2000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	2000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	2000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	2000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	2000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	2000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	2000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	2000	-
(Cl.24ofIS302-221:2011)(Component)	-	2000	-
(Cl.24ofIS302-221:2011)(Component)	-	2000	-
(Cl.24ofIS302-221:2011)(Component)	-	2000	-
(Cl.24ofIS302-221:2011)(Component)	-	2000	-
(Cl.24ofIS302-221:2011)(Component)	-	2000	-
(Cl.24ofIS302-221:2011)(Component)	-	2000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	2000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	2000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	2000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	2000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	2000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	2000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	2000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	2000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	2000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	2000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	2000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	2000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	2000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	2000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	2000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	2000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	2000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	2000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	2000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	2000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	2000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	2000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	2000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	2000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	2000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	2000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	2000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	2000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	2000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	2000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	2000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	2000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	2000	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	2000	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	2000	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	2000	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	2000	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	2000	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	2000	-
(Cl.28 of IS 302-2-21:2011)(Screws & Connections)	-	2000	-
(Cl.29ofIS302-2-21:2011)(Clearances, Creepage Distances and Solid Insulation)	-	2000	-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	2000	-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	2000	-
(Cl.31 of IS 302-2-21:2011)(Resistance to Rusting)	-	2000	-
(Cl.15 of IS 2082:2018)(Verification of the Rated Capacity)	-	2000	-
(Cl.16 of IS 2082:2018)(Standing Loss per 24 Hours)	-	2000	-
(Cl.17 of IS 2082:2018)(Hot Water Output)	-	2000	-
(Cl.18 of IS 2082:2018)( Reheating Time)	-	2000	-
(Cl.19 of IS 2082:2018)(Mixing Factor)	-	2000	-
(Cl.20 of IS 2082:2018)(Deviation of Dial Calibration)	-	2000	-
(Cl.21 of IS 2082:2018)(Cyclic Temperature Variation)	-	2000	-
(Cl.22 of IS 2082:2018)(Finish)	-	2000	-
Cl.22 of IS 2082:2018(Finish)	-	2000	-
Cl.21 of IS 2082:2018(Cyclic Temperature Variation)	-	2000	-
Cl.20 of IS 2082:2018(Deviation of Dial Calibration)	-	2000	-
Cl.19 of IS 2082:2018(Mixing Factor)	-	2000	-
Cl.18 of IS 2082:2018( Reheating Time)	-	2000	-
Cl.17 of IS 2082:2018(Hot Water Output)	-	2000	-
Cl.16 of IS 2082:2018(Standing Loss per 24 Hours)	-	2000	-
Cl.15 of IS 2082:2018(Verification of the Rated Capacity)	-	2000	-
Cl.31 of IS 302-2-21:2018(Resistance to Rusting)	-	2000	-
Cl.30.2 of IS 302-1:2008(Resistance to Heat & Fire : Glow wire test )	-	2000	-
Cl.30.1 of IS 302-1:2008(Resistance to Heat & Fire : Ball pressure test )	-	2000	-
Cl.29.2 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage distance )	-	2000	-
Cl.29.1 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance distance )	-	2000	-
Cl.28 of IS 302-2-21:2018(Screws & Connections)	-	2000	-
Cl.27.5 of IS 302-1:2008(Provision for Earthing : ECR )	-	2000	-
Cl.27 of IS 302-2-21:2018(Provision for Earthing)	-	2000	-
Cl.26 of IS 302-2-21: 2018(Terminals for External Conductors)	-	2000	-
Cl.25.18 of IS 302-1:2008(Supply Connection & External Flexible Cords)	-	2000	-
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test - displacement )	-	2000	-
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test )	-	2000	-
Cl.25.12 of IS 302-1:2008(Supply Connection & External Flexible Cords : Moulding of supply cord )	-	2000	-
Cl.25.10 of IS 302-1:2008(Supply Connection & External Flexible Cords : Colour of Earthing conductor )	-	2000	-
Cl.25.8 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : Resistance of supply cord )	-	2000	-
Cl.25.5 of IS 302-1:2008(Supply Connection & External Flexible Cords : Type of attachment )	-	2000	-
Cl.25 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : connection to the supply mains)	-	2000	-
Cl.24.102 of IS 302-221:2018(Component : Operation of thermal cut-out )	-	2000	-
Cl.24.101 of IS302-221:2018(Component : Location of non self reseting thermal cut out )	-	2000	-
Cl.24of IS 302-221:2018(Component : Relevent Indian standards )	-	2000	-
Cl. 23 of IS 302-1:2008(Internal Wiring : color identification for earthing conductor )	-	2000	-
Cl. 23 of IS 302-1:2008(Internal Wiring )	-	2000	-
Cl.22.111 of IS 302-2-21:2018(Construction : Resistance to vacuum )	-	2000	-
Cl.22.110 of IS 302-2-21:2018(Construction : meterial of connections )	-	2000	-
Cl.22.110 of IS 302-2-21:2018(Construction : Material of Inner conatiner )	-	2000	-
Cl.22.109 of IS 302-2-21:2018(Construction : Drain for appliance having a capacity of more than 15 liter)	-	2000	-
Cl.22.108 of IS 302-2-21:2018(Construction : fixing to wall )	-	2000	-
Cl.22.107 of IS 302-2-21:2018(Construction : Position of Heating elements and thermal control sensor)	-	2000	-
Cl.22.106 of IS 302-2-21:2018(Construction : Operation of thermal cut- out )	-	2000	-
Cl.22.104 of IS 302-2-21:2018(Construction : Outlet of open outlet heater )	-	2000	-
Cl.22.103 of IS 302-2-21:2018(Construction : Operation of Pressure relieve devices )	-	2000	-
Cl.22.102 of IS 302-2-21:2018(Construction : repeated drawing of water temp )	-	2000	-
Cl.22.101 of IS 302-2-21:2018(Construction : rated pressure of closed water heater )	-	2000	-
Cl.22.47 of IS 302-2-21:2018 (Construction : Water pressure test )	-	2000	-
Cl.22.44 of IS 302-1:2008(Construction : Shape and decoration of enclosure)	-	2000	-
Cl.22.34, Cl 22.35 of IS 302-1:2008(Construction : Shaft of operating Knobs )	-	2000	-
Cl.22.33 of IS 302-1:2008(Construction : Direct contact of liquids )	-	2000	-
Cl 22.26 ,Cl.22.28, Cl 22.29, Cl 22.30 , Cl 22.31, Cl 22.32 of IS 302-1:2008(Construction : Supplymentry/ double / reinforced insulation for Class II/ Class III appliance )	-	2000	-
Cl.22.18 Of IS 302-1:2008(Construction : Resistance to corrosion )	-	2000	-
Cl.22.17 of IS 302-1:2008(Construction : Spacers )	-	2000	-
Cl.22.14 of IS 302-1:2008(Construction : ragged or sharp edges)	-	2000	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knob, grips, levers and similar parts)	-	2000	-
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable part )	-	2000	-
Cl.22.7 of IS 302-1:2008(Construction: adequate safeguards against the risk of excessive pressure)	-	2000	-
Cl.22.6 of IS 302-2-21:2018(Construction : Size of drain hole )	-	2000	-
Cl.22.6 of IS 302-1:2008(Construction : Effect of water on 3 insulation )	-	2000	-
Cl.22.2 of IS 302-1:2008(Construction : Provision to ensure all pole disconnection )	-	2000	-
Cl.22.1 of IS 302-1:2008(Construction : IP test )	-	2000	-
Cl.21.2 of IS 302-1:2008(Mechanical strength : prevent penetration by sharp implements. )	-	2000	-
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	2000	-
Cl.20 of IS 302-1:2008(Stability & Mechanical Hazards)	-	2000	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : leakage from container during test)	-	2000	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : High Voltage )	-	2000	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Insulation of the supply cable or cord)	-	2000	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Wall ceiling temp. of test corner )	-	2000	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : emission of flame or molten metal or poisonous or ignitable gas )	-	2000	-
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	2000	-
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Leakage current )	-	2000	-
Cl.15 of IS 302-2-21-2018(Moisture Resistance)	-	2000	-
Cl.14 of IS 302-2-21:2018(Transient Over Voltages)	-	2000	-
Cl.13 of IS 302-2-21:2018(3 Strength at Operating Temperature)	-	2000	-
Cl.13 of IS 302-2-21:2018(Leakage Current )	-	2000	-
Cl.11 of 302-2-21:2018(Heating : Room Temp.)	-	2000	-
Cl.11 of 302-2-21:2018(Heating : Temp of Rubber or PVC insulation of internal and external wiring)	-	2000	-
Cl.11 of 302-2-21:2018(Heating : Temp of Walls, ceilings and floor of the test corner )	-	2000	-
Cl.10 of IS 302-2-21: 2018(Power Input & Current)	-	2000	-
Cl.8 of IS 302-2-21:2018(Protection Against Access to Live Parts)	-	2000	-
7.101(Marking : Indifiction of water inlet and water outlet )	-	2000	-
7.14(Marking : Legibility and durability)	-	2000	-
7.13(Marking : Official language of Instruction )	-	2000	-
7.11(Marking : Indication of controls )	-	2000	-
7.8(Marking : Terminals )	-	2000	-
7.6(Marking : Symbol used )	-	2000	-
7.1(Marking : Warning for Open- outlet )	-	2000	-
7.1(Marking : Statement for pressure reducing valve ( For rated pressure less than 0.6 MPa))	-	2000	-
7.1(Marking : Statement for a pressure-relief device)	-	2000	-
7.1(Marking : Rated capacity)	-	2000	-
7.1(Marking : Rated pressure)	-	2000	-
7.1(Marking : Country of manufacture)	-	2000	-
7.1(Marking: IP Number)	-	2000	-
7.1(Marking: Symbol for Class II)	-	2000	-
7.1(Marking: Model or type reference)	-	2000	-
7.1(Marking: Name, trademark or identification mark of manufacturer )	-	2000	-
7.1(Marking : Rated power input)	-	2000	-
7.1(Marking : Symbol for nature of supply )	-	2000	-
7.1(Marking : Rated Voltage )	-	2000	-
Cl.32 of IS 302-1:2008()	-	2000	-
4(GENERAL REQUIREMENT)	-	2000	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	2000	-
12(THERMOSTAT SETTING)	-	2000	-
Cl-10(Mounting of the water heater)	-	2000	-
Cl-11(Measurements of stored water temperature)	-	2000	-
Cl-12(Thermostat setting)	-	2000	-
Cl-13(Measurement of energy consumption)	-	2000	-
Cl-14(Verification of the rated capacity)	-	2000	-

14 Nov, 2027

-
Included w.e.f 30.01.2025

IS 16046 : Part 2 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 2 Lithium Systems ( Second Revision )

141000 View breakup
Rs.121000/- for Nickel Battery, Rs.113000/- for Lithium cells, Rs.71000/- for Lithium battery (10% discount for BIS)under CRS

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(General Safety Considerations)	-	1000	10% Discount for BIS
5.1(General)	-	1000	10% Discount for BIS
5.2(Insulation and Wiring)	-	5000	10% Discount for BIS
5.3(Venting)	-	1000	10% Discount for BIS
5.4(Temperature, Voltage and Current Management)	-	10000	10% Discount for BIS
5.5(Terminal Contacts)	-	1000	10% Discount for BIS
5.6(Assembly of Cells into batteries)	-	1000	10% Discount for BIS
5.7(Quality Plan)	-	1000	10% Discount for BIS
6(Type Test and Sample Size)	-	14000	10% Discount for BIS
7(Specific requirements and tests)	-	1000	10% Discount for BIS
7.1(Charging procedure for test purposes)	-	14000	10% Discount for BIS
7.2(Intended Use)	-	20000	10% Discount for BIS
7.3(Reasonably foreseeable misuse)	-	50000	10% Discount for BIS
8(Information for safety)	-	5000	10% Discount for BIS
8.1(General)	-	1000	10% Discount for BIS
8.2(Small Cell and battery safety information)	-	10000	10% Discount for BIS
9.1(Cell Marking)	-	1000	10% Discount for BIS
9.2(Battery Marking)	-	1000	10% Discount for BIS
9.3(Caution for ingestion of small cells and batteries)	-	1000	10% Discount for BIS
9.4(Other information)	-	1000	10% Discount for BIS
10(Packaging)	-	1000	10% Discount for BIS

14 Nov, 2027

-
-

IS 18112 (2022)

Digital Television Receiver for Satellite Broadcast Transmission Specification

211500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.4, Table-2, ii)(RF characteristics to be supported by the DTV receiver)	-	15000	-
3.3(Specifications)	-	15000	-
3.5(Safety specification)	-	25000	-
4(Marking)	-	5000	-
5(Operating Life Test)	-	35000	-
3.1, Table-1, i) a)(Hardware specification)	-	15000	-
3.1, Table-1, i) b)(Decompression and decoding of SDTV video)	-	15000	-
3.1, Table-1, i) c)(Decompression and decoding of HDTV video)	-	15000	-
3.1, Table-1, i) d)(Decompression and decoding of audio)	-	15000	-
3.1, Table-1, i) e)(Active Format descriptors)	-	15000	-
3.1, Table-1, i) f)(Captioning and Sub-titling)	-	15000	-
3.1, Table-1, i) g)(Teletext)	-	15000	-
3.1, Table-1, i) h)(Multi-language support)	-	15000	-
3.1, Table-1, i) j)(DTV receiver mixed Audio Descriptio)	-	15000	-
3.1, Table-1, i) k)(Broadcast mixed audio description)	-	15000	-
3.1, Table-1, i) m)(Service demultiplexing)	-	15000	-
3.1, Table-1, i) n)(Data services)	-	15000	-
3.1, Table-1, i) p)(OSD)	-	15000	-
3.1, Table-1, i) q)(DTV Receiver character set)	-	15000	-
3.1, Table-1, i) r)(Electronic Service Guide (ESG) ‘Now/Next’)	-	15000	-
3.1, Table-1, i) s)(Time)	-	15000	-
3.1, Table-1, i) t)(Digital TV output)	-	15000	-
3.4, Table-2, i) b)(Frequency)	-	15000	-
3.4, Table-2, i) a)(Input voltage range)	-	15000	-
3.1, Table-1, ii) a)(Demodulation and FEC decoding)	-	15000	-
3.1, Table-1, ii) b)(DTV Receiver Installation)	-	15000	-
3.1, Table-1, ii) c)(Network evolution)	-	15000	-
3.4, Table-2, iii) c)(RF input impedance)	-	15000	-
3.1, Table-1, ii) d)(Services available)	-	15000	-
3.1, Table-1, ii) e)(Selection via Service List)	-	15000	-
3.1, Table-1, ii) f)(Selection via Numeric Entry)	-	15000	-
3.1, Table-1, ii) g)(Favourite Channel list)	-	15000	-
3.1, Table-1, ii) h)(Hidden Services)	-	15000	-
3.4, Table-2, iii) b)(Input frequency range)	-	15000	-
3.1, Table-1, ii) j)(Logical Channel Number for Satellite services)	-	15000	-
3.1, Table-1, ii) k)(RF input signal)	-	15000	-
3.1, Table-1, ii) m)(LNB supply current)	-	15000	-
3.1, Table-1, ii) n)(LNB supply voltage)	-	15000	-
3.1, Table-1, ii) p)(LNB Control)	-	15000	-
3.1, Table-1, ii) q)(Modulation/Demodulation parameters for DVB-S & DVB-S2 standard)	-	15000	-
3.4, Table-2, iii) a)(Input level per carrier)	-	15000	-
3.4, Table-2, iv) c)(RF input impedance)	-	15000	-
3.4, Table-2, iv) b)(Input frequency range)	-	15000	-
3.4, Table-2, iv) a)(Input level per carrier)	-	15000	-
3.4, Table-2, v)(Symbol rate)	-	15000	-
3.4, Table-2, vi)(RF input return loss)	-	15000	-
3.4, Table-2, vii)(DisEqC)	-	15000	-
3.4, Table-2, viii)(Operating ambient temperature range)	-	15000	-
3.4, Table-2, ix)(Operating humidity range)	-	15000	-
3.4, Table-2, x)(Power consumption)	-	25000	-
3.1, Table-1, iii) a)(Interfaces, Connectors)	-	15000	-
3.1, Table-1, iv)(Automatic software upgrade mechanism)	-	15000	-
3.1, Table-1, v) a)(Remote Control)	-	15000	-
3.1, Table-1, v) b)(Easy to use and simple documentation)	-	15000	-
3.1, Table-1, v) c)(Support package)	-	15000	-
3.4, Table-2, ii)(RF characteristics to be supported by the DTV receiver)	-	15000	-
3.3(Specifications)	-	15000	-
3.5(Safety specification)	-	15000	-
4(Marking)	-	15000	-
5(Operating Life Test)	-	15000	-
3.1, Table-1, i) a)(Hardware specification)	-	15000	-
3.1, Table-1, i) b)(Decompression and decoding of SDTV video)	-	15000	-
3.1, Table-1, i) c)(Decompression and decoding of HDTV video)	-	15000	-
3.1, Table-1, i) d)(Decompression and decoding of audio)	-	15000	-
3.1, Table-1, i) e)(Active Format descriptors)	-	15000	-
3.1, Table-1, i) f)(Captioning and Sub-titling)	-	15000	-
3.1, Table-1, i) g)(Teletext)	-	15000	-
3.1, Table-1, i) h)(Multi-language support)	-	15000	-
3.1, Table-1, i) j)(DTV receiver mixed Audio Descriptio)	-	15000	-
3.1, Table-1, i) k)(Broadcast mixed audio description)	-	15000	-
3.1, Table-1, i) m)(Service demultiplexing)	-	15000	-
3.1, Table-1, i) n)(Data services)	-	15000	-
3.1, Table-1, i) p)(OSD)	-	15000	-
3.1, Table-1, i) q)(DTV Receiver character set)	-	15000	-
3.1, Table-1, i) r)(Electronic Service Guide (ESG) ‘Now/Next’)	-	15000	-
3.1, Table-1, i) s)(Time)	-	15000	-
3.1, Table-1, i) t)(Digital TV output)	-	15000	-
3.4, Table-2, i) b)(Frequency)	-	15000	-
3.4, Table-2, i) a)(Input voltage range)	-	15000	-
3.1, Table-1, ii) a)(Demodulation and FEC decoding)	-	15000	-
3.1, Table-1, ii) b)(DTV Receiver Installation)	-	15000	-
3.1, Table-1, ii) c)(Network evolution)	-	15000	-
3.4, Table-2, iii) c)(RF input impedance)	-	15000	-
3.1, Table-1, ii) d)(Services available)	-	15000	-
3.1, Table-1, ii) e)(Selection via Service List)	-	15000	-
3.1, Table-1, ii) f)(Selection via Numeric Entry)	-	15000	-
3.1, Table-1, ii) g)(Favourite Channel list)	-	15000	-
3.1, Table-1, ii) h)(Hidden Services)	-	15000	-
3.4, Table-2, iii) b)(Input frequency range)	-	15000	-
3.1, Table-1, ii) j)(Logical Channel Number for Satellite services)	-	15000	-
3.1, Table-1, ii) k)(RF input signal)	-	15000	-
3.1, Table-1, ii) m)(LNB supply current)	-	15000	-
3.1, Table-1, ii) n)(LNB supply voltage)	-	15000	-
3.1, Table-1, ii) p)(LNB Control)	-	15000	-
3.1, Table-1, ii) q)(Modulation/Demodulation parameters for DVB-S & DVB-S2 standard)	-	15000	-
3.4, Table-2, iii) a)(Input level per carrier)	-	15000	-
3.4, Table-2, iv) c)(RF input impedance)	-	15000	-
3.4, Table-2, iv) b)(Input frequency range)	-	15000	-
3.4, Table-2, iv) a)(Input level per carrier)	-	15000	-
3.4, Table-2, v)(Symbol rate)	-	15000	-
3.4, Table-2, vi)(RF input return loss)	-	15000	-
3.4, Table-2, vii)(DisEqC)	-	15000	-
3.4, Table-2, viii)(Operating ambient temperature range)	-	15000	-
3.4, Table-2, ix)(Operating humidity range)	-	15000	-
3.4, Table-2, x)(Power consumption)	-	15000	-
3.1, Table-1, iii) a)(Interfaces, Connectors)	-	15000	-
3.1, Table-1, iv)(Automatic software upgrade mechanism)	-	15000	-
3.1, Table-1, v) a)(Remote Control)	-	15000	-
3.1, Table-1, v) b)(Easy to use and simple documentation)	-	15000	-
3.1, Table-1, v) c)(Support package)	-	15000	-
3.4, Table-2, ii)(RF characteristics to be supported by the DTV receiver)	-	15000	-
3.3(Specifications)	-	15000	-
3.5(Safety specification)	-	25000	-
4(Marking)	-	5000	-
5(Operating Life Test)	-	35000	-
3.1, Table-1, i) a)(Hardware specification)	-	15000	-
3.1, Table-1, i) b)(Decompression and decoding of SDTV video)	-	15000	-
3.1, Table-1, i) c)(Decompression and decoding of HDTV video)	-	15000	-
3.1, Table-1, i) d)(Decompression and decoding of audio)	-	15000	-
3.1, Table-1, i) e)(Active Format descriptors)	-	15000	-
3.1, Table-1, i) f)(Captioning and Sub-titling)	-	15000	-
3.1, Table-1, i) g)(Teletext)	-	15000	-
3.1, Table-1, i) h)(Multi-language support)	-	15000	-
3.1, Table-1, i) j)(DTV receiver mixed Audio Descriptio)	-	15000	-
3.1, Table-1, i) k)(Broadcast mixed audio description)	-	15000	-
3.1, Table-1, i) m)(Service demultiplexing)	-	15000	-
3.1, Table-1, i) n)(Data services)	-	15000	-
3.1, Table-1, i) p)(OSD)	-	15000	-
3.1, Table-1, i) q)(DTV Receiver character set)	-	15000	-
3.1, Table-1, i) r)(Electronic Service Guide (ESG) ‘Now/Next’)	-	15000	-
3.1, Table-1, i) s)(Time)	-	15000	-
3.1, Table-1, i) t)(Digital TV output)	-	15000	-
3.4, Table-2, i) b)(Frequency)	-	15000	-
3.4, Table-2, i) a)(Input voltage range)	-	15000	-
3.1, Table-1, ii) a)(Demodulation and FEC decoding)	-	15000	-
3.1, Table-1, ii) b)(DTV Receiver Installation)	-	15000	-
3.1, Table-1, ii) c)(Network evolution)	-	15000	-
3.4, Table-2, iii) c)(RF input impedance)	-	15000	-
3.1, Table-1, ii) d)(Services available)	-	15000	-
3.1, Table-1, ii) e)(Selection via Service List)	-	15000	-
3.1, Table-1, ii) f)(Selection via Numeric Entry)	-	15000	-
3.1, Table-1, ii) g)(Favourite Channel list)	-	15000	-
3.1, Table-1, ii) h)(Hidden Services)	-	15000	-
3.4, Table-2, iii) b)(Input frequency range)	-	15000	-
3.1, Table-1, ii) j)(Logical Channel Number for Satellite services)	-	15000	-
3.1, Table-1, ii) k)(RF input signal)	-	15000	-
3.1, Table-1, ii) m)(LNB supply current)	-	15000	-
3.1, Table-1, ii) n)(LNB supply voltage)	-	15000	-
3.1, Table-1, ii) p)(LNB Control)	-	15000	-
3.1, Table-1, ii) q)(Modulation/Demodulation parameters for DVB-S & DVB-S2 standard)	-	15000	-
3.4, Table-2, iii) a)(Input level per carrier)	-	15000	-
3.4, Table-2, iv) c)(RF input impedance)	-	15000	-
3.4, Table-2, iv) b)(Input frequency range)	-	15000	-
3.4, Table-2, iv) a)(Input level per carrier)	-	15000	-
3.4, Table-2, v)(Symbol rate)	-	15000	-
3.4, Table-2, vi)(RF input return loss)	-	15000	-
3.4, Table-2, vii)(DisEqC)	-	15000	-
3.4, Table-2, viii)(Operating ambient temperature range)	-	15000	-
3.4, Table-2, ix)(Operating humidity range)	-	15000	-
3.4, Table-2, x)(Power consumption)	-	15000	-
3.1, Table-1, iii) a)(Interfaces, Connectors)	-	15000	-
3.1, Table-1, iv)(Automatic software upgrade mechanism)	-	15000	-
3.1, Table-1, v) a)(Remote Control)	-	15000	-
3.1, Table-1, v) b)(Easy to use and simple documentation)	-	15000	-
3.1, Table-1, v) c)(Support package)	-	15000	-
3.4, Table-2, ii)(RF characteristics to be supported by the DTV receiver)	-	15000	-
3.3(Specifications)	-	15000	-
3.5(Safety specification)	-	15000	-
4(Marking)	-	15000	-
5(Operating Life Test)	-	15000	-
3.1, Table-1, i) a)(Hardware specification)	-	15000	-
3.1, Table-1, i) b)(Decompression and decoding of SDTV video)	-	15000	-
3.1, Table-1, i) c)(Decompression and decoding of HDTV video)	-	15000	-
3.1, Table-1, i) d)(Decompression and decoding of audio)	-	15000	-
3.1, Table-1, i) e)(Active Format descriptors)	-	15000	-
3.1, Table-1, i) f)(Captioning and Sub-titling)	-	15000	-
3.1, Table-1, i) g)(Teletext)	-	15000	-
3.1, Table-1, i) h)(Multi-language support)	-	15000	-
3.1, Table-1, i) j)(DTV receiver mixed Audio Descriptio)	-	15000	-
3.1, Table-1, i) k)(Broadcast mixed audio description)	-	15000	-
3.1, Table-1, i) m)(Service demultiplexing)	-	15000	-
3.1, Table-1, i) n)(Data services)	-	15000	-
3.1, Table-1, i) p)(OSD)	-	15000	-
3.1, Table-1, i) q)(DTV Receiver character set)	-	15000	-
3.1, Table-1, i) r)(Electronic Service Guide (ESG) ‘Now/Next’)	-	15000	-
3.1, Table-1, i) s)(Time)	-	15000	-
3.1, Table-1, i) t)(Digital TV output)	-	15000	-
3.4, Table-2, i) b)(Frequency)	-	15000	-
3.4, Table-2, i) a)(Input voltage range)	-	15000	-
3.1, Table-1, ii) a)(Demodulation and FEC decoding)	-	15000	-
3.1, Table-1, ii) b)(DTV Receiver Installation)	-	15000	-
3.1, Table-1, ii) c)(Network evolution)	-	15000	-
3.4, Table-2, iii) c)(RF input impedance)	-	15000	-
3.1, Table-1, ii) d)(Services available)	-	15000	-
3.1, Table-1, ii) e)(Selection via Service List)	-	15000	-
3.1, Table-1, ii) f)(Selection via Numeric Entry)	-	15000	-
3.1, Table-1, ii) g)(Favourite Channel list)	-	15000	-
3.1, Table-1, ii) h)(Hidden Services)	-	15000	-
3.4, Table-2, iii) b)(Input frequency range)	-	15000	-
3.1, Table-1, ii) j)(Logical Channel Number for Satellite services)	-	15000	-
3.1, Table-1, ii) k)(RF input signal)	-	15000	-
3.1, Table-1, ii) m)(LNB supply current)	-	15000	-
3.1, Table-1, ii) n)(LNB supply voltage)	-	15000	-
3.1, Table-1, ii) p)(LNB Control)	-	15000	-
3.1, Table-1, ii) q)(Modulation/Demodulation parameters for DVB-S & DVB-S2 standard)	-	15000	-
3.4, Table-2, iii) a)(Input level per carrier)	-	15000	-
3.4, Table-2, iv) c)(RF input impedance)	-	15000	-
3.4, Table-2, iv) b)(Input frequency range)	-	15000	-
3.4, Table-2, iv) a)(Input level per carrier)	-	15000	-
3.4, Table-2, v)(Symbol rate)	-	15000	-
3.4, Table-2, vi)(RF input return loss)	-	15000	-
3.4, Table-2, vii)(DisEqC)	-	15000	-
3.4, Table-2, viii)(Operating ambient temperature range)	-	15000	-
3.4, Table-2, ix)(Operating humidity range)	-	15000	-
3.4, Table-2, x)(Power consumption)	-	15000	-
3.1, Table-1, iii) a)(Interfaces, Connectors)	-	15000	-
3.1, Table-1, iv)(Automatic software upgrade mechanism)	-	15000	-
3.1, Table-1, v) a)(Remote Control)	-	15000	-
3.1, Table-1, v) b)(Easy to use and simple documentation)	-	15000	-
3.1, Table-1, v) c)(Support package)	-	15000	-
3.4, Table-2, ii)(RF characteristics to be supported by the DTV receiver)	-	15000	-
3.3(Specifications)	-	15000	-
3.5(Safety specification)	-	15000	-
4(Marking)	-	15000	-
5(Operating Life Test)	-	15000	-
3.1, Table-1, i) a)(Hardware specification)	-	15000	-
3.1, Table-1, i) b)(Decompression and decoding of SDTV video)	-	15000	-
3.1, Table-1, i) c)(Decompression and decoding of HDTV video)	-	15000	-
3.1, Table-1, i) d)(Decompression and decoding of audio)	-	15000	-
3.1, Table-1, i) e)(Active Format descriptors)	-	15000	-
3.1, Table-1, i) f)(Captioning and Sub-titling)	-	15000	-
3.1, Table-1, i) g)(Teletext)	-	15000	-
3.1, Table-1, i) h)(Multi-language support)	-	15000	-
3.1, Table-1, i) j)(DTV receiver mixed Audio Descriptio)	-	15000	-
3.1, Table-1, i) k)(Broadcast mixed audio description)	-	15000	-
3.1, Table-1, i) m)(Service demultiplexing)	-	15000	-
3.1, Table-1, i) n)(Data services)	-	15000	-
3.1, Table-1, i) p)(OSD)	-	15000	-
3.1, Table-1, i) q)(DTV Receiver character set)	-	15000	-
3.1, Table-1, i) r)(Electronic Service Guide (ESG) ‘Now/Next’)	-	15000	-
3.1, Table-1, i) s)(Time)	-	15000	-
3.1, Table-1, i) t)(Digital TV output)	-	15000	-
3.4, Table-2, i) b)(Frequency)	-	15000	-
3.4, Table-2, i) a)(Input voltage range)	-	15000	-
3.1, Table-1, ii) a)(Demodulation and FEC decoding)	-	15000	-
3.1, Table-1, ii) b)(DTV Receiver Installation)	-	15000	-
3.1, Table-1, ii) c)(Network evolution)	-	15000	-
3.4, Table-2, iii) c)(RF input impedance)	-	15000	-
3.1, Table-1, ii) d)(Services available)	-	15000	-
3.1, Table-1, ii) e)(Selection via Service List)	-	15000	-
3.1, Table-1, ii) f)(Selection via Numeric Entry)	-	15000	-
3.1, Table-1, ii) g)(Favourite Channel list)	-	15000	-
3.1, Table-1, ii) h)(Hidden Services)	-	15000	-
3.4, Table-2, iii) b)(Input frequency range)	-	15000	-
3.1, Table-1, ii) j)(Logical Channel Number for Satellite services)	-	15000	-
3.1, Table-1, ii) k)(RF input signal)	-	15000	-
3.1, Table-1, ii) m)(LNB supply current)	-	15000	-
3.1, Table-1, ii) n)(LNB supply voltage)	-	15000	-
3.1, Table-1, ii) p)(LNB Control)	-	15000	-
3.1, Table-1, ii) q)(Modulation/Demodulation parameters for DVB-S & DVB-S2 standard)	-	15000	-
3.4, Table-2, iii) a)(Input level per carrier)	-	15000	-
3.4, Table-2, iv) c)(RF input impedance)	-	15000	-
3.4, Table-2, iv) b)(Input frequency range)	-	15000	-
3.4, Table-2, iv) a)(Input level per carrier)	-	15000	-
3.4, Table-2, v)(Symbol rate)	-	15000	-
3.4, Table-2, vi)(RF input return loss)	-	15000	-
3.4, Table-2, vii)(DisEqC)	-	15000	-
3.4, Table-2, viii)(Operating ambient temperature range)	-	15000	-
3.4, Table-2, ix)(Operating humidity range)	-	15000	-
3.4, Table-2, x)(Power consumption)	-	15000	-
3.1, Table-1, iii) a)(Interfaces, Connectors)	-	15000	-
3.1, Table-1, iv)(Automatic software upgrade mechanism)	-	15000	-
3.1, Table-1, v) a)(Remote Control)	-	15000	-
3.1, Table-1, v) b)(Easy to use and simple documentation)	-	15000	-
3.1, Table-1, v) c)(Support package)	-	15000	-

14 Nov, 2027

-
Included w.e.f 21.04.2025 Exclusion : Cl 3.6 Electromagnetic Compatibility(EMC) Requirements, Cl 3.1 Table 1(i)(p) OSD

IS 1391 : Part 1 (2017)

Room air conditioners - Specification: Part 1 unitary air conditioners (Third Revision)

unitary air conditioners

500000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No. 16.4.2(Pressure Test or Leakage Test was conducted prior to start of Cooling Capacity Test using a Balanced Ambient Room-Type Calorimeter. )	-	25000	-
Clause No. 9.1.2, 10.4(Maximum Operating test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	50000	-
Clause No. 9.1.3, 10.5(Freeze Up (Air Blockage Test & Drip Test) Test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	50000	-
Clause No. 9.1.4, 10.6(Enclosure Sweat test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	25000	-
10.7(Condensate disposal test as per)	-	15000	-
Cooling Capacity Test (Cl. No. 9.1.1, 10.10), Power Factor Test (Cl. No. 10.3), Power Consumption Test for Cooling (Cl. No. 10.8) (Cooling Capacity Test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	25000	-
Cooling Capacity Test (Cl. No. 9.1.1, 10.10), Power Factor Test (Cl. No. 10.3), Power Consumption Test for Cooling (Cl. No. 10.8) (Cooling Capacity Test at Full Load and Half Load were conducted using a Balanced Ambient Room-Type Calorimeter. )	-	90000	-
Heating Capacity test (Clause No. 9.2.1), Power consumption test by heat pump ( Clause No. 10.9)(The Heating capacity test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	75000	-
Clause No. 15.3(Sound Test was conducted using Sound Level Meter. )	-	25000	-
Clause No. 16.2.3 & 16.3.3(b)(The High Voltage (Electric strength) Test was conducted using AC withstanding voltage/IR Tester. )	-	10000	-
Clause No. 16.2.4 & 16.3.3(d)(The 3 Leakage Current at Operating Temperature (Leakage Current Test) was conducted using Leak Current Hitester. )	-	10000	-
Clause No. 16.2.5 & 16.3.3(c)(The Provision for Earthing (Earth Resistance Test) was conducted using a Earth Continuity Tester. )	-	20000	-
Clause No. 16.3.3(a)(The Protection against access to the live part was conducted using Test Probe B.)	-	15000	-
Clause No. 9.2.2 (The Maximum Heating/Overload Test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	50000	-
Clause No. 5.1(Physical Verification)	-	5000	-
10.2(Safety Conditions for unit using A3 refrigerants)	-	10000	-
5.2(Material)	-	15000	-
5.3.5(Electrical Cable)	-	5000	-
5.4(Refrigerent Cycle)	-	15000	-
5.6(Grounding Terminal and Grounding Lead Wire)	-	5000	-
5.7(Air Filter)	-	15000	-
18(Marking- IS 1391 (Part 1))	-	1000	-
16.3.4(Electric Strength test)	-	5000	-
16.3.6(Leakage Current Test)	-	5000	-
16.3.7(Earthing Resistance Test)	-	5000	-
10.11, 15(Sound Test)	-	5000	-
10.12(Heating Capacity Test)	-	25000	-
10.14(Maximum Heating Performance Test)	-	25000	-
16.2.1(General Running Test)	-	10000	-
16.2.2(Pressure Test or Leakage Test)	-	5000	-
5.8(Temreture Sensing Controlers- IS 1391 (Part 1), IS/IEC 60730 Part 2 Section 9)	-	500	-
5.9(Hermetic Compressor)	-	500	-
5.10(Motors)	-	5000	-
5.11(Heat Exchanger)	-	10000	-
16.3.3(Protection Against Access to the live part)	-	5000	-
10.3, 16.3.1 (c)(Power Factor Test)	-	5000	-
10.4, 16.3.1 (d)(Maximum Operating Conditions Test)	-	25000	-
10.5, 16.3.1 (e)(Freeze up test)	-	15000	-
10.6, 16.3.1(f)(Enclosure Sweat test)	-	15000	-
10.8, 16.3.1 (g)(Power Consumption Test for Cooling-)	-	15000	-
10.9, 16.3.1 (g)(Power Consumption Test for Heating Pump)	-	15000	-
10.10(Cooling Capacity Test)	-	25000	-
7.2(Heat Pump Heating Capacity Ratings)	-	25000	-
7.7(Electrical Ratings)	-	10000	-

14 Nov, 2027

-
-

IS 1391 : Part 2 (2018)

Room air conditioners - Specification: Part 2 split air conditioners (Third Revision)

630000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No. 5.1(Physical Verification)	-	5000	-
Clause No. 8.2.2 (The Maximum Heating/Overload Test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	40000	-
9.2(Safety Conditions for A3 refrigerants)	-	10000	-
Clause No. 8.1.2, 9.4(Maximum Operating test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	80000	-
Clause No. 8.1.3, 9.5( Freeze Up (Air Blockage Test & Drip Test) Test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	60000	-
Clause No. 8.1.4, 9.6( Enclosure Sweat test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	30000	-
Cooling Capacity Test (Cl. No. 8.1.1, 9.9), Power Factor Test (Cl. No. 9.3), Power Consumption Test for Cooling (Cl. No. 9.7)(Cooling Capacity Test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	135000	-
Cooling Capacity Test (Cl. No. 8.1.1, 9.9), Power Factor Test (Cl. No. 9.3), Power Consumption Test for Cooling (Cl. No. 9.7)(Cooling Capacity Test at Full Load and Half Load were conducted using a Balanced Ambient Room-Type Calorimeter. )	-	50000	-
Clause No. 15.2.3 & 15.3.3(b)(High Voltage (Electric strength) Test was conducted using AC withstanding voltage/IR Tester. )	-	10000	-
Clause No. 15.2.4 & 15.3.3(d)( 3 Leakage Current at Operating Temperature (Leakage Current Test) was conducted using Leak Current Hitester.)	-	10000	-
Clause No. 15.2.5 & 15.3.3(c)(Provision for Earthing (Earth Resistance Test) was conducted using a Earth Continuity Tester. )	-	20000	-
Clause No. 15.3.3(a)(Protection against access to the live part was conducted using Test Probe B.)	-	25000	-
Clause No. 14.3( Sound Test was conducted using Sound Level Meter. )	-	40000	-
Heating Capacity test (Clause No. 8.2.1, 9.11), Power consumption test by heat pump (Clause No. 9.8)(The Heating capacity test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	120000	-
Clause No. 15.4.2( Pressure Test or Leakage Test was conducted prior to start of Cooling Capacity Test using a Balanced Ambient Room-Type Calorimeter. )	-	55000	-
9.12(Measurement of ISEER)	-	10000	-
5.2(Material- IS 1391 (Part 2))	-	15000	-
5.3(Electrical Charged Paerts- IS 1391 (Part 2))	-	5000	-
5.4(Refrigerent Circuit- IS 1391 (Part 2))	-	15000	-
5.6(Grounding Terminal and Grounding Lead Wire- IS 1391 (Part 2), IS 302 (Part 1))	-	5000	-
5.7(Air Filter- IS 1391 (Part 2))	-	5000	-
5.8(Temreture Sensing Controlers- IS 1391 (Part 1), IS/IEC 60730 Part 2 Section 9)	-	500	-
5.9(Hermetic Compressor- IS 1391 (Part 1), IS 10617)	-	500	-
5.10(Motors- IS 1391 (Part 1), IS 996)	-	5000	-
5.11(Heat Exchanger- IS 1391 (Part 1), IS 11329)	-	10000	-
15.12.1(General Running Test- IS 1391 (Part 2))	-	10000	-
15.12.2(Pressure Test or Leakage Test- IS 1391 (Part 2))	-	5000	-
15.12.3(High Voltage Test- IS 1391 (Part 2))	-	5000	-
15.12.4,13.2(Leakage Current Test- IS 1391 (Part 2), IS 302 (Part 1))	-	5000	-
9.3, 15.3.1 (c)(Power Factor Test- IS 1391 (Part 2))	-	5000	-
9.4, 15.3.1 (d)(Maximum Operating Conditions Test- IS 1391 (Part 2))	-	25000	-
9.5, 15.3.1 (e)(Freeze up test- IS 1391 (Part 2))	-	15000	-
9.6, 15.3.1(f)(Enclosure Sweat test- IS 1391 (Part 2))	-	15000	-
9.7, 15.3.1 (g)(Power Consumption Test for Cooling- IS 1391 (Part 2))	-	15000	-
9.8, 16.3.1 (g)(Power Consumption Test for Heating Pump- IS 1391 (Part 2))	-	15000	-
9.9(Cooling Capacity Test- IS 1391 (Part 2 ))	-	25000	-
9.10, 12(Sound Test- IS 1391 (Part 2))	-	10000	-
9.13(Maximum Heating Performance Test- IS 1391 (Part 2))	-	25000	-
9.12, 8.3, Annex-J(Measurement of ISEER- IS 1391 (Part 2))	-	0	-
9.11(Heating Capacity Test- IS 1391 (Part 2))	-	25000	-
15.12.5,15.3.3(c),27(Earthing Resistence Test (Provision for Earthing)- IS 1391 (Part 2), IS 302 (Part 1))	-	10000	-
17(Marking- IS 1391(Part 2))	-	1000	-
15.3.3(Protection Against Access to the live part- IS 302 (Part 1))	-	5000	-
15.3.3(Electric Strength Test- IS 302 (Part 1))	-	5000	-
15.3.3(Electrical Leakage Current Test at Operating Tempreture- IS 302 (Part 1))	-	5000	-
6.1(Cooling Capacity Ratings)	-	0	-
6.2(Heat Pump Heating Capacity Ratings)	-	0	-
6.3(Power Consumption Ratings for Heating by Heat Pump)	-	0	-
6.5(Electrical Heating Capacity Ratings)	-	0	-
6.6(Electrical Ratings)	-	0	-

14 Nov, 2027

-
-

IS 302 : Part 2 : Sec 7 (2024)

Safety of Household And Similar Electrical Appliances Part 2 Particular Requirements Section 7: Domestic Electric Clothes Washing Machines

70000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(GENERAL REQUIREMENT)	-	15000	-
6(CLASSIFICATION)	-	15000	-
7(MARKING AND INSTRUCTIONS)	-	5000	-
8(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	15000	-
10(POWER INPUT AND CURRENT)	-	15000	-
11(HEATING)	-	25000	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	15000	-
14(TRANSIENT OVERVOLTAGES)	-	25000	-
15(MOISTURE RESISTANCE)	-	30000	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	15000	-
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	15000	-
18(ENDURANCE)	-	45000	-
19(ABNORMAL OPERATION)	-	30000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	30000	-
21(MECHANICAL STRENGTH)	-	30000	-
23(INTERNAL WIRING)	-	5000	-
24(COMPONENTS)	-	10000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	12000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	12000	-
27(PROVISION FOR EARTHING)	-	15000	-
28(SCREWS AND CONNECTIONS)	-	10000	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	12500	-
30(RESISTANCE TO HEAT AND FIRE)	-	15000	-
31(RESISTANCE TO RUSTING)	-	25000	-
22(CONSTRUCTION)	-	20000	-
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	20000	-
4(GENERAL REQUIREMENT)	-	15000	-
6(CLASSIFICATION)	-	15000	-
7(MARKING AND INSTRUCTIONS)	-	5000	-
8(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	15000	-
10(POWER INPUT AND CURRENT)	-	25000	-
11(HEATING)	-	35000	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	25000	-
14(TRANSIENT OVERVOLTAGES)	-	25000	-
15(MOISTURE RESISTANCE)	-	25000	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	25000	-
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	25000	-
18(ENDURANCE)	-	25000	-
19(ABNORMAL OPERATION)	-	25000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	25000	-
21(MECHANICAL STRENGTH)	-	25000	-
23(INTERNAL WIRING)	-	25000	-
24(COMPONENTS)	-	25000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	25000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	25000	-
27(PROVISION FOR EARTHING)	-	25000	-
28(SCREWS AND CONNECTIONS)	-	25000	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	25000	-
30(RESISTANCE TO HEAT AND FIRE)	-	25000	-
31(RESISTANCE TO RUSTING)	-	25000	-
22(CONSTRUCTION)	-	25000	-
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	25000	-
19.13(ABNORMAL OPERATION)	-	25000	-
19.101(Abnormal Operation)	-	25000	-
19.102(Abnormal Operation)	-	25000	-

14 Nov, 2027

IS 302 : Part 2 : SEC 31 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 31 range hoods

34000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No - 5(GENERAL CONDITIONS FOR THE TESTS)	-	5000	-
Clause No - 5.18(linear and angular dimension)	-	5000	-
Clause No - 6.2(harmfull ingress of water)	-	5000	-
Clause No - 8.1.1("PROTECTION AGAINST ACCESS TO LIVE PART- test probe B")	-	5000	-
Clause No - 8.1.2("PROTECTION AGAINST ACCESS TO LIVE PART - test probe 13")	-	5000	-
Clause No - 8.2(Addition)	-	5000	-
Clause No - 10.1, Table No. -1(power input deviation)	-	5000	-
Clause No - 13.3("LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE")	-	5000	-
Clause No - 13.3,Table No.- 4(voltage for electrical strength)	-	5000	-
Clause No - 14(Impulse test voltage)	-	5000	-
Clause No - 15.1.1(MOISTURE RESISTANCE)	-	5000	-
Clause No -19.7(test is repeated with the capacitor short circuited)	-	5000	-
Clause No -21.1(Mechanical strength)	-	5000	-
Clause No -22.1(construction)	-	5000	-
Clause No -22.11(push force applied)	-	5000	-
Clause No -24.1.2(safety isolating transformer)	-	5000	-
Clause No -24.1.3(for switches)	-	5000	-
Clause No -24.1.4(for automatic control)	-	5000	-
Clause No -24.1.5(for innterconnection couplers)	-	5000	-
Clause No -24.4(plug and socket)	-	5000	-
Clause No -25.8, Table no -11(conductor resistance)	-	5000	-
Clause No -25.5(dimension for pins)	-	5000	-
Clause No -27.6(for circuit board)	-	5000	-
Clause No -29.2(comparative tracking index)	-	5000	-
Clause No -29.3.3(dry heat test)	-	5000	-
Clause No -30.2.1(glow wire test)	-	5000	-
Clause No -30.101("incorporate combustible material")	-	5000	-
Clause No - 5(GENERAL CONDITIONS FOR THE TESTS)	-	5000	-
Clause No - 5.18(linear and angular dimension)	-	5000	-
Clause No - 6.2(harmfull ingress of water)	-	5000	-
Clause No - 8.1.1("PROTECTION AGAINST ACCESS TO LIVE PART- test probe B")	-	5000	-
Clause No - 8.1.2("PROTECTION AGAINST ACCESS TO LIVE PART - test probe 13")	-	5000	-
Clause No - 8.2(Addition)	-	5000	-
Clause No - 10.1, Table No. -1(power input deviation)	-	5000	-
Clause No - 13.3("LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE")	-	5000	-
Clause No - 13.3,Table No.- 4(voltage for electrical strength)	-	5000	-
Clause No - 14(Impulse test voltage)	-	5000	-
Clause No - 15.1.1(MOISTURE RESISTANCE)	-	5000	-
Clause No -19.7(test is repeated with the capacitor short circuited)	-	5000	-
Clause No -21.1(Mechanical strength)	-	5000	-
Clause No -22.1(construction)	-	5000	-
Clause No -22.11(push force applied)	-	5000	-
Clause No -24.1.2(safety isolating transformer)	-	5000	-
Clause No -24.1.3(for switches)	-	5000	-
Clause No -24.1.4(for automatic control)	-	5000	-
Clause No -24.1.5(for innterconnection couplers)	-	5000	-
Clause No -24.4(plug and socket)	-	5000	-
Clause No -25.8, Table no -11(conductor resistance)	-	5000	-
Clause No -25.5(dimension for pins)	-	5000	-
Clause No -27.6(for circuit board)	-	5000	-
Clause No -29.2(comparative tracking index)	-	5000	-
Clause No -29.3.3(dry heat test)	-	5000	-
Clause No -30.2.1(glow wire test)	-	5000	-
Clause No -30.101("incorporate combustible material")	-	5000	-
Clause No - 5(GENERAL CONDITIONS FOR THE TESTS)	-	5000	-
Clause No - 5.18(linear and angular dimension)	-	5000	-
Clause No - 6.2(harmfull ingress of water)	-	5000	-
Clause No - 8.1.1("PROTECTION AGAINST ACCESS TO LIVE PART- test probe B")	-	5000	-
Clause No - 8.1.2("PROTECTION AGAINST ACCESS TO LIVE PART - test probe 13")	-	5000	-
Clause No - 8.2(Addition)	-	5000	-
Clause No - 10.1, Table No. -1(power input deviation)	-	5000	-
Clause No - 13.3("LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE")	-	5000	-
Clause No - 13.3,Table No.- 4(voltage for electrical strength)	-	5000	-
Clause No - 14(Impulse test voltage)	-	5000	-
Clause No - 15.1.1(MOISTURE RESISTANCE)	-	5000	-
Clause No -19.7(test is repeated with the capacitor short circuited)	-	5000	-
Clause No -21.1(Mechanical strength)	-	5000	-
Clause No -22.1(construction)	-	5000	-
Clause No -22.11(push force applied)	-	5000	-
Clause No -24.1.2(safety isolating transformer)	-	5000	-
Clause No -24.1.3(for switches)	-	5000	-
Clause No -24.1.4(for automatic control)	-	5000	-
Clause No -24.1.5(for innterconnection couplers)	-	5000	-
Clause No -24.4(plug and socket)	-	5000	-
Clause No -25.8, Table no -11(conductor resistance)	-	5000	-
Clause No -25.5(dimension for pins)	-	5000	-
Clause No -27.6(for circuit board)	-	5000	-
Clause No -29.2(comparative tracking index)	-	5000	-
Clause No -29.3.3(dry heat test)	-	5000	-
Clause No -30.2.1(glow wire test)	-	5000	-
Clause No -30.101("incorporate combustible material")	-	5000	-

14 Nov, 2027

-
Exclusion: Clause No -19.11.4.1 (electrostatic discharge) Clause No -19.11.4.2 (radiated field) Clause No -19.11.4.3 (fast transient) Clause No -19.11.4.4 (Voltage dips and interruption)

IS 2553 : Part 2 (2019)

Safety glass - Specification: Part 2 for road transport (First Revision)

145500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Light Transmittance)	-	5000	-
5.1.1(Light Transmittance)	-	5000	-
5.1.2.1(Resistance to Abrasion)	-	7200	-
5.1.2.2(Resistance to Abrasion)	-	7200	-
5.1.2.3.1(Resistance to Abrasion)	-	7200	-
5.1.2.3.1(Resistance to Abrasion)	-	7200	-
5.1.2.3.2(Resistance to Abrasion)	-	7200	-
5.1.2.3.2(Resistance to Abrasion)	-	7200	-
5.2.1(Resistance to Temperature Changes)	-	7200	-
5.2.2(a) Resistance to Fire)	-	7200	-
5.2.2(b) Resistance to Fire)	-	7200	-
5.3.1 (Resistance to Radiation)	-	20000	-
5.3.2(Resistance to High Temperature)	-	6200	-
5.3.3.1(Resistance to Humidity)	-	45000	-
5.3.3.2(Resistance to Humidity)	-	45000	-
5.3.3.2(Resistance to Humidity)	-	45000	-
5.3.3.3(Resistance to Humidity)	-	45000	-
5.4.1(Optical Distortion)	-	5800	-
5.4.1.3 (Optical Distortion)	-	5800	-
5.4.2(Secondary image separation test-Vehicle Category M1 and N -Zone A)	-	5800	-
5.4.2(Secondary image separation test-Vehicle Category M1 and N -Zone B)	-	5800	-
5.4.2(Secondary image separation test-Vehicle Category L -Zone Primary area)	-	5800	-
5.4.2(Secondary image separation test-Vehicle Category L -Zone Secondary area)	-	5800	-
5.4.2(Secondary image separation test-Vehicle Category M2 , M3 and N -central area)	-	5800	-
5.4.2.3(Secondary image separation test)	-	5800	-
5.4.3.1(Head-form Test (Location of crack))	-	10000	-
5.4.3.3.2(Head-form Test)	-	10000	-
5.4.4(2.260 g Ball)	-	5500	-
5.4.5.1(227 g Ball)	-	9500	-
5.4.5.2(227 g Ball)	-	9500	-
5.4.5.3(227 g Ball)	-	9500	-
5.4.5.4(227 g Ball)	-	9500	-
5.5.1.1.1(Fragmentation Test)	-	9500	-
5.5.1.1.4(Fragmentation Test)	-	9500	-
5.5.1.1.5(Fragmentation Test)	-	9500	-
5.5.1.1.5.1(Fragmentation Test)	-	9500	-
5.5.1.1.5.2(Fragmentation Test)	-	9500	-
5.5.1.2(227 g ball test)	-	9500	-
5.5.2.1.1(227 g ball test)	-	9500	-
5.5.2.1.2(227 g ball test)	-	9500	-
5.5.2.1.3(227 g ball test)	-	9500	-
5.5.3.1(equirements Applicable only to Double-Glazed Units-Individual components)	-	9500	-
5.5.3.2.1( Head-form Test)	-	9500	-
5.5.3.2.2.1( Head-form Test)	-	9500	-
5.5.3.2.2.2( Head-form Test)	-	9500	-
5.5.3.2.2.3( Head-form Test)	-	9500	-
5.5.3.2.3-a( Head-form Test)	-	9500	-
5.5.3.2.3-b-1( Head-form Test)	-	9500	-
5.5.3.2.3-b-2( Head-form Test)	-	9500	-
5.5.3.2.3-b-3( Head-form Test)	-	9500	-
5.6.1.7( Head-form Test)	-	9500	-
5.6.1.8( Head-form Test-The HIC value )	-	9500	-
5.6.2.4-a(Mechanical Strength Test — 227g Ball)	-	9500	-
5.6.2.4-b(Mechanical Strength Test — 227g Ball)	-	9500	-
5.6.2.5(Mechanical Strength Test — 227g Ball test at –18° ± 2°C)	-	9500	-
5.6.2.5(Mechanical Strength Test — 227g Ball test at –18° ± 2°C)	-	9500	-
5.6.3.3(Flexibility and Fold Test)	-	9500	-
5.6.4.4-a(Weathering)	-	45000	-
5.6.4.4-b(Weathering)	-	45000	-
5.6.5.3-a(Cross-cut)	-	9500	-
5.6.5.3-b-1(Cross-cut)	-	9500	-
5.7.1.1(227 g Ball Test at 20 ± 5°C)	-	9500	-
5.7.2.1(227g Ball Test at –18° ± 2°C)	-	9500	-
5.7.3.1(Flexibility Test and Fold Test)	-	9500	-
5.7.3.1(Flexibility Test and Fold Test)	-	9500	-
5.4.5(227 g Ball test)	-	9500	-
5.4.3.2(Head-form Test (Interlayer adhesion))	-	9500	-
5.4.3.3.1(Head-form Test)	-	9500	-
5.4.3.1(Head-form Test (Location of crack))	-	9500	-
5.4.5(227 g Ball test)	-	9500	-
5.4.3.2(Head-form Test (Interlayer adhesion))	-	9500	-
5.4.3.1(Head-form Test (Location of crack))	-	-	-
5.4.5(227 g Ball test)	-	-	-
5.4.3.2(Head-form Test (Interlayer adhesion))	-	-	-
As per Clause 3.7(Wind screen and Panes)	-	-	-
As per Clause 4.1(Wind screen and Panes)	-	-	-
As per Clause 5.8.2(Wind screen)	-	-	-
As per Clause 5.8.3(Wind screen)	-	-	-

14 Nov, 2027

-
Complete testing charges for Toughened safety glass for Panes- Rs. 14,900/- Complete testing charges for Laminated safety glass for Panes- Rs. 79,500/- Complete testing charges for Laminated safety glass for Windscreen- Rs. 89,500/- Complete testing charges for Plastic Glazing Materials- Rs. 1,45,500/-

IS 2553 : Part 1 (2018)

Safety glass - Specification: Part 1 architectural, building and general uses (Fourth Revision)

96500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Types)	-	1000	-
5.1.1(General)	-	5000	-
5.1.2(Optical Faults-IS 14900)	-	15000	-
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	15000	-
5.1.2(Reams, Strings and Lines-IS 14900)	-	15000	-
5.1.2(Linear / Extended Faults -IS 14900)	-	15000	-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	4000	-
5.2.2.1( Dimensions- Width )	-	2000	-
5.2.2.1( Dimensions- Length)	-	2000	-
5.2.2.2( Squareness)	-	2000	-
5.2.3 (Fragmentation Test- IS 17004)	-	7000	-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	1100	-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	1100	-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	1100	-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	1100	-
5.2.4.1 (Other distortions)	-	1100	-
5.2.5.1( Resistance to shock- IS 17004)	-	6500	-
5.2.5.2( Resistance to human impact- IS 17004)	-	16000	-
5.2.6( Surface Compression (Optional)- IS 17004)	-	20000	-
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	21000	-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	15000	-
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	5000	-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	12000	-
5.3.2.1( Dimensions and squareness- Width )	-	12000	-
5.3.2.1( Dimensions and squareness- Length)	-	12000	-
5.3.2.1( Dimensions and squareness-Squareness)	-	12000	-
5.3.2.2 (Edge displacement)	-	12000	-
5.3.3( Light Stability Test-IS 17004)	-	12000	-
5.3.3( Light Stability Test-IS 17004)	-	12000	-
5.3.4( Boil and Bake Tests-IS 17004)	-	4000	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	4000	-
5.3.6.1( Spot defects in the central area)	-	1000	-
5.3.6.2 (Linear defects in the central area)	-	1000	-
5.3.6.3( Defects in the outer area for framed edges)	-	1000	-
5.3.6.4( Vents)	-	2000	-
5.3.6.5( Creases and streaks)	-	2000	-
5.3.6.6( Defects on edge which will not be framed)	-	2000	-
5.3.7( Humidity Test – Optional)	-	32000	-
5.3.8( Resistance to Human Impact Test)	-	16000	-
4(Types)	-	0	-
5.1.1(General)	-	0	-
5.1.2(Optical Faults-IS 14900)	-	0	-
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	0	-
5.1.2(Reams, Strings and Lines-IS 14900)	-	0	-
5.1.2(Linear / Extended Faults -IS 14900)	-	0	-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	0	-
5.2.2.1( Dimensions- Width )	-	0	-
5.2.2.1( Dimensions- Length)	-	0	-
5.2.2.2( Squareness)	-	0	-
5.2.3 (Fragmentation Test- IS 17004)	-	0	-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	0	-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	0	-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	0	-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	0	-
5.2.5.1( Resistance to shock- IS 17004)	-	0	-
5.2.5.2( Resistance to human impact- IS 17004)	-	0	-
5.2.6( Surface Compression (Optional)- IS 17004)	-	0	-
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	0	-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	0	-
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	0	-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	0	-
5.3.2.1( Dimensions and squareness- Width )	-	0	-
5.3.2.1( Dimensions and squareness- Length)	-	0	-
5.3.2.1( Dimensions and squareness-Squareness)	-	0	-
5.3.2.2 (Edge displacement)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.4( Boil and Bake Tests-IS 17004)	-	0	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	0	-
5.3.6.1( Spot defects in the central area)	-	0	-
5.3.6.2 (Linear defects in the central area)	-	0	-
5.3.6.3( Defects in the outer area for framed edges)	-	0	-
5.3.6.6( Defects on edge which will not be framed)	-	0	-
5.3.8( Resistance to Human Impact Test)	-	16000	-
5.2.1(Thickness)	-	0	-
5.2.2(Dimension and Squarenes)	-	0	-
5.2.4(Overall Bow)	-	0	-
5.2.4(Measurement of wave and roller wave)	-	0	-
5.2.4(Edge lift)	-	0	-
5.2.4(Local distortion)	-	0	-
5.2.3(Fragmentation test)	-	0	-
5.2.7(Four point bending)	-	0	-
5.2.6(Surface compression)	-	0	-
5.2.5.1(Resistance to shock)	-	0	-
5.2.5.2(Resistance to human impact)	-	0	-
5.3.1(Thickness test)	-	0	-
5.3.2.1(Dimension and Squarenes test)	-	0	-
5.3.6(Defects in central area test)	-	0	-
5.3.6.7(Defects in central area test)	-	0	-
5.3.5(Fracture and adhesion)	-	0	-
5.3.8(Resistance to human impact)	-	0	-
5.3.4(Boil test)	-	0	-
5.3.4(Bake test)	-	0	-
5.3.7(Humidity test with condensation)	-	32000	-
5.3.7(Humidity test without condensation)	-	32000	-
5.3.3(Light stability test)	-	12000	-
5.3.2.2(Edge displacement test)	-	0	-
5.2.2(5.2.2 Dimension and Squarenes test)	-	0	-
5.2.4(measurement of wave and roller wave)	-	0	-
5.2.8(Fabrication in Glass)	-	0	-
Cl. No. 5.2.2.3.1, Table No. 1A(Shape accuracy, girth and length)	-	0	-
Cl. No. 5.2.2.3.2(Edge straightness deviation)	-	0	-
Cl. No. 5.2.2.3.3(Maximum cross-curve deviation)	-	0	-
5.2.4.1 (Other distortions)	-	0	-
5.3.6.4( Vents)	-	0	-
5.3.6.5( Creases and streaks)	-	0	-
5.3.7( Humidity Test – Optional)	-	0	-
4(Types)	-	0	-
5.1.1(General)	-	0	-
5.1.2(Optical Faults-IS 14900)	-	0	-
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	0	-
5.1.2(Reams, Strings and Lines-IS 14900)	-	0	-
5.1.2(Linear / Extended Faults -IS 14900)	-	0	-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	0	-
5.2.2.1( Dimensions- Width )	-	0	-
5.2.2.1( Dimensions- Length)	-	0	-
5.2.2.2( Squareness)	-	0	-
5.2.3 (Fragmentation Test- IS 17004)	-	0	-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	0	-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	0	-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	0	-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	0	-
5.2.4.1 (Other distortions)	-	0	-
5.2.5.1( Resistance to shock- IS 17004)	-	0	-
5.2.5.2( Resistance to human impact- IS 17004)	-	0	-
5.2.6( Surface Compression (Optional)- IS 17004)	-	0	-
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	0	-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	0	-
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	0	-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	0	-
5.3.2.1( Dimensions and squareness- Width )	-	0	-
5.3.2.1( Dimensions and squareness- Length)	-	0	-
5.3.2.1( Dimensions and squareness-Squareness)	-	0	-
5.3.2.2 (Edge displacement)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.4( Boil and Bake Tests-IS 17004)	-	0	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	0	-
5.3.6.1( Spot defects in the central area)	-	0	-
5.3.6.2 (Linear defects in the central area)	-	0	-
5.3.6.3( Defects in the outer area for framed edges)	-	0	-
5.3.6.4( Vents)	-	0	-
5.3.6.5( Creases and streaks)	-	0	-
5.3.6.6( Defects on edge which will not be framed)	-	0	-
5.3.7( Humidity Test – Optional)	-	0	-
5.3.8( Resistance to Human Impact Test)	-	0	-
4(Types)	-	0	-
5.1.1(General)	-	0	-
5.1.2(Optical Faults-IS 14900)	-	0	-
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	0	-
5.1.2(Reams, Strings and Lines-IS 14900)	-	0	-
5.1.2(Linear / Extended Faults -IS 14900)	-	0	-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	0	-
5.2.2.1( Dimensions- Width )	-	0	-
5.2.2.1( Dimensions- Length)	-	0	-
5.2.2.2( Squareness)	-	0	-
5.2.3 (Fragmentation Test- IS 17004)	-	0	-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	0	-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	0	-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	0	-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	0	-
5.2.5.1( Resistance to shock- IS 17004)	-	0	-
5.2.5.2( Resistance to human impact- IS 17004)	-	0	-
5.2.6( Surface Compression (Optional)- IS 17004)	-	0	-
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	0	-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	0	-
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	0	-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	0	-
5.3.2.1( Dimensions and squareness- Width )	-	0	-
5.3.2.1( Dimensions and squareness- Length)	-	0	-
5.3.2.1( Dimensions and squareness-Squareness)	-	0	-
5.3.2.2 (Edge displacement)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.4( Boil and Bake Tests-IS 17004)	-	0	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	0	-
5.3.6.1( Spot defects in the central area)	-	0	-
5.3.6.2 (Linear defects in the central area)	-	0	-
5.3.6.3( Defects in the outer area for framed edges)	-	0	-
5.3.6.6( Defects on edge which will not be framed)	-	0	-
5.3.8( Resistance to Human Impact Test)	-	0	-
5.2.1(Thickness)	-	0	-
5.2.2(Dimension and Squarenes)	-	0	-
5.2.4(Overall Bow)	-	0	-
5.2.4(Measurement of wave and roller wave)	-	0	-
5.2.4(Edge lift)	-	0	-
5.2.4(Local distortion)	-	0	-
5.2.3(Fragmentation test)	-	0	-
5.2.7(Four point bending)	-	0	-
5.2.6(Surface compression)	-	0	-
5.2.5.1(Resistance to shock)	-	0	-
5.2.5.2(Resistance to human impact)	-	0	-
5.3.1(Thickness test)	-	0	-
5.3.2.1(Dimension and Squarenes test)	-	0	-
5.3.6(Defects in central area test)	-	0	-
5.3.6.7(Defects in central area test)	-	0	-
5.3.5(Fracture and adhesion)	-	0	-
5.3.8(Resistance to human impact)	-	0	-
5.3.4(Boil test)	-	0	-
5.3.4(Bake test)	-	0	-
5.3.7(Humidity test with condensation)	-	0	-
5.3.7(Humidity test without condensation)	-	0	-
5.3.3(Light stability test)	-	0	-
5.3.2.2(Edge displacement test)	-	0	-
5.2.2(5.2.2 Dimension and Squarenes test)	-	0	-
5.2.4(measurement of wave and roller wave)	-	0	-
5.2.8(Fabrication in Glass)	-	0	-
Cl. No. 5.2.2.3.1, Table No. 1A(Shape accuracy, girth and length)	-	0	-
Cl. No. 5.2.2.3.2(Edge straightness deviation)	-	0	-
Cl. No. 5.2.2.3.3(Maximum cross-curve deviation)	-	0	-
5.2.4.1 (Other distortions)	-	0	-
5.3.6.4( Vents)	-	0	-
5.3.6.5( Creases and streaks)	-	0	-
5.3.7( Humidity Test – Optional)	-	0	-
4(Types)	-	0	-
5.1.1(General)	-	0	-
5.1.2(Optical Faults-IS 14900)	-	0	-
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	0	-
5.1.2(Reams, Strings and Lines-IS 14900)	-	0	-
5.1.2(Linear / Extended Faults -IS 14900)	-	0	-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	0	-
5.2.2.1( Dimensions- Width )	-	0	-
5.2.2.1( Dimensions- Length)	-	0	-
5.2.2.2( Squareness)	-	0	-
5.2.3 (Fragmentation Test- IS 17004)	-	0	-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	0	-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	0	-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	0	-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	0	-
5.2.4.1 (Other distortions)	-	0	-
5.2.5.1( Resistance to shock- IS 17004)	-	0	-
5.2.5.2( Resistance to human impact- IS 17004)	-	0	-
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	0	-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	0	-
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	0	-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	0	-
5.3.2.1( Dimensions and squareness- Width )	-	0	-
5.3.2.1( Dimensions and squareness- Length)	-	0	-
5.3.2.1( Dimensions and squareness-Squareness)	-	0	-
5.3.2.2 (Edge displacement)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.4( Boil and Bake Tests-IS 17004)	-	0	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	0	-
5.3.6.1( Spot defects in the central area)	-	0	-
5.3.6.2 (Linear defects in the central area)	-	0	-
5.3.6.3( Defects in the outer area for framed edges)	-	0	-
5.3.6.4( Vents)	-	0	-
5.3.6.5( Creases and streaks)	-	0	-
5.3.6.6( Defects on edge which will not be framed)	-	0	-
5.3.7( Humidity Test – Optional)	-	0	-
5.3.8( Resistance to Human Impact Test)	-	0	-
4(Types)	-	0	-
5.1.1(General)	-	0	-
5.1.2(Optical Faults-IS 14900)	-	0	-
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	0	-
5.1.2(Reams, Strings and Lines-IS 14900)	-	0	-
5.1.2(Linear / Extended Faults -IS 14900)	-	0	-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	0	-
5.2.2.1( Dimensions- Width )	-	0	-
5.2.2.1( Dimensions- Length)	-	0	-
5.2.2.2( Squareness)	-	0	-
5.2.3 (Fragmentation Test- IS 17004)	-	0	-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	0	-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	0	-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	0	-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	0	-
5.2.5.1( Resistance to shock- IS 17004)	-	0	-
5.2.5.2( Resistance to human impact- IS 17004)	-	0	-
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	0	-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	0	-
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	0	-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	0	-
5.3.2.1( Dimensions and squareness- Width )	-	0	-
5.3.2.1( Dimensions and squareness- Length)	-	0	-
5.3.2.1( Dimensions and squareness-Squareness)	-	0	-
5.3.2.2 (Edge displacement)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.4( Boil and Bake Tests-IS 17004)	-	0	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	0	-
5.3.6.1( Spot defects in the central area)	-	0	-
5.3.6.2 (Linear defects in the central area)	-	0	-
5.3.6.3( Defects in the outer area for framed edges)	-	0	-
5.3.6.6( Defects on edge which will not be framed)	-	0	-
5.3.8( Resistance to Human Impact Test)	-	0	-
5.2.1(Thickness)	-	0	-
5.2.2(Dimension and Squarenes)	-	0	-
5.2.4(Overall Bow)	-	0	-
5.2.4(Measurement of wave and roller wave)	-	0	-
5.2.4(Edge lift)	-	0	-
5.2.4(Local distortion)	-	0	-
5.2.3(Fragmentation test)	-	0	-
5.2.7(Four point bending)	-	0	-
5.2.6(Surface compression)	-	0	-
5.2.5.1(Resistance to shock)	-	0	-
5.2.5.2(Resistance to human impact)	-	0	-
5.3.1(Thickness test)	-	0	-
5.3.2.1(Dimension and Squarenes test)	-	0	-
5.3.6(Defects in central area test)	-	0	-
5.3.6.7(Defects in central area test)	-	0	-
5.3.5(Fracture and adhesion)	-	0	-
5.3.8(Resistance to human impact)	-	0	-
5.3.4(Boil test)	-	0	-
5.3.4(Bake test)	-	0	-
5.3.7(Humidity test with condensation)	-	0	-
5.3.7(Humidity test without condensation)	-	0	-
5.3.3(Light stability test)	-	0	-
5.3.2.2(Edge displacement test)	-	0	-
5.2.2(5.2.2 Dimension and Squarenes test)	-	0	-
5.2.4(measurement of wave and roller wave)	-	0	-
5.2.8(Fabrication in Glass)	-	0	-
Cl. No. 5.2.2.3.1, Table No. 1A(Shape accuracy, girth and length)	-	0	-
Cl. No. 5.2.2.3.2(Edge straightness deviation)	-	0	-
Cl. No. 5.2.2.3.3(Maximum cross-curve deviation)	-	0	-
5.2.4.1 (Other distortions)	-	0	-
5.3.6.4( Vents)	-	0	-
5.3.6.5( Creases and streaks)	-	0	-
5.3.7( Humidity Test – Optional)	-	0	-
4(Types)	-	0	-
5.1.1(General)	-	0	-
5.1.2(Optical Faults-IS 14900)	-	0	-
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	0	-
5.1.2(Reams, Strings and Lines-IS 14900)	-	0	-
5.1.2(Linear / Extended Faults -IS 14900)	-	0	-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	0	-
5.2.2.1( Dimensions- Width )	-	0	-
5.2.2.1( Dimensions- Length)	-	0	-
5.2.2.2( Squareness)	-	0	-
5.2.3 (Fragmentation Test- IS 17004)	-	0	-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	0	-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	0	-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	0	-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	0	-
5.2.4.1 (Other distortions)	-	0	-
5.2.5.1( Resistance to shock- IS 17004)	-	0	-
5.2.5.2( Resistance to human impact- IS 17004)	-	0	-
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	0	-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	0	-
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	0	-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	0	-
5.3.2.1( Dimensions and squareness- Width )	-	0	-
5.3.2.1( Dimensions and squareness- Length)	-	0	-
5.3.2.1( Dimensions and squareness-Squareness)	-	0	-
5.3.2.2 (Edge displacement)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.4( Boil and Bake Tests-IS 17004)	-	0	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	0	-
5.3.6.1( Spot defects in the central area)	-	0	-
5.3.6.2 (Linear defects in the central area)	-	0	-
5.3.6.3( Defects in the outer area for framed edges)	-	0	-
5.3.6.4( Vents)	-	0	-
5.3.6.5( Creases and streaks)	-	0	-
5.3.6.6( Defects on edge which will not be framed)	-	0	-
5.3.7( Humidity Test – Optional)	-	0	-
5.3.8( Resistance to Human Impact Test)	-	0	-
4(Types)	-	0	-
5.1.1(General)	-	0	-
5.1.2(Optical Faults-IS 14900)	-	0	0
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	0	-
5.1.2(Reams, Strings and Lines-IS 14900)	-	0	0
5.1.2(Linear / Extended Faults -IS 14900)	-	0	-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	0	-
5.2.2.1( Dimensions- Width )	-	0	-
5.2.2.1( Dimensions- Length)	-	0	-
5.2.2.2( Squareness)	-	0	-
5.2.3 (Fragmentation Test- IS 17004)	-	0	-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	0	-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	0	-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	0	-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	0	-
5.2.5.1( Resistance to shock- IS 17004)	-	0	-
5.2.5.2( Resistance to human impact- IS 17004)	-	0	-
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	0	-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	0	-
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	0	-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	0	-
5.3.2.1( Dimensions and squareness- Width )	-	0	-
5.3.2.1( Dimensions and squareness- Length)	-	0	-
5.3.2.1( Dimensions and squareness-Squareness)	-	0	-
5.3.2.2 (Edge displacement)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.4( Boil and Bake Tests-IS 17004)	-	0	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	0	-
5.3.6.1( Spot defects in the central area)	-	0	-
5.3.6.2 (Linear defects in the central area)	-	0	-
5.3.6.3( Defects in the outer area for framed edges)	-	0	-
5.3.6.6( Defects on edge which will not be framed)	-	0	0
5.3.8( Resistance to Human Impact Test)	-	0	-
5.2.1(Thickness)	-	0	-
5.2.2(Dimension and Squarenes)	-	0	-
5.2.4(Overall Bow)	-	0	-
5.2.4(Measurement of wave and roller wave)	-	0	-
5.2.4(Edge lift)	-	0	-
5.2.4(Local distortion)	-	0	-
5.2.3(Fragmentation test)	-	0	-
5.2.7(Four point bending)	-	0	-
5.2.5.1(Resistance to shock)	-	0	-
5.2.5.2(Resistance to human impact)	-	0	-
5.3.1(Thickness test)	-	0	-
5.3.2.1(Dimension and Squarenes test)	-	0	-
5.3.6(Defects in central area test)	-	0	-
5.3.6.7(Defects in central area test)	-	0	-
5.3.5(Fracture and adhesion)	-	0	-
5.3.8(Resistance to human impact)	-	0	-
5.3.4(Boil test)	-	0	-
5.3.4(Bake test)	-	0	-
5.3.7(Humidity test with condensation)	-	0	-
5.3.7(Humidity test without condensation)	-	0	-
5.3.3(Light stability test)	-	0	-
5.3.2.2(Edge displacement test)	-	0	-
5.2.2(5.2.2 Dimension and Squarenes test)	-	0	-
5.2.4(measurement of wave and roller wave)	-	0	-
5.2.8(Fabrication in Glass)	-	0	-
Cl. No. 5.2.2.3.1, Table No. 1A(Shape accuracy, girth and length)	-	0	-
Cl. No. 5.2.2.3.2(Edge straightness deviation)	-	0	-
Cl. No. 5.2.2.3.3(Maximum cross-curve deviation)	-	0	-
5.2.4.1 (Other distortions)	-	0	-
5.3.6.4( Vents)	-	0	-
5.3.6.5( Creases and streaks)	-	0	-
5.3.7( Humidity Test – Optional)	-	0	-
4(Types)	-	-	-
5.1.1(General)	-	-	-
5.1.2(Optical Faults-IS 14900)	-	-	-
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	-	-
5.1.2(Reams, Strings and Lines-IS 14900)	-	-	-
5.1.2(Linear / Extended Faults -IS 14900)	-	-	-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	-	-
5.2.2.1( Dimensions- Width )	-	-	-
5.2.2.1( Dimensions- Length)	-	-	-
5.2.2.2( Squareness)	-	-	-
5.2.3 (Fragmentation Test- IS 17004)	-	-	-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	-	-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	-	-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	-	-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	-	-
5.2.4.1 (Other distortions)	-	-	-
5.2.5.1( Resistance to shock- IS 17004)	-	-	-
5.2.5.2( Resistance to human impact- IS 17004)	-	-	-
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	-	-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	-	-
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	-	-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	-	-
5.3.2.1( Dimensions and squareness- Width )	-	-	-
5.3.2.1( Dimensions and squareness- Length)	-	-	-
5.3.2.1( Dimensions and squareness-Squareness)	-	-	-
5.3.2.2 (Edge displacement)	-	-	-
5.3.3( Light Stability Test-IS 17004)	-	-	-
5.3.3( Light Stability Test-IS 17004)	-	-	-
5.3.4( Boil and Bake Tests-IS 17004)	-	-	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	-	-
5.3.6.1( Spot defects in the central area)	-	-	-
5.3.6.2 (Linear defects in the central area)	-	-	-
5.3.6.3( Defects in the outer area for framed edges)	-	-	-
5.3.6.4( Vents)	-	-	-
5.3.6.5( Creases and streaks)	-	-	-
5.3.6.6( Defects on edge which will not be framed)	-	-	-
5.3.7( Humidity Test – Optional)	-	-	-
5.3.8( Resistance to Human Impact Test)	-	-	-
4(Types)	-	-	-
5.1.1(General)	-	-	-
5.1.2(Optical Faults-IS 14900)	-	-	-
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	-	-
5.1.2(Reams, Strings and Lines-IS 14900)	-	-	-
5.1.2(Linear / Extended Faults -IS 14900)	-	-	-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	-	-
5.2.2.1( Dimensions- Width )	-	-	-
5.2.2.1( Dimensions- Length)	-	-	-
5.2.2.2( Squareness)	-	-	-
5.2.3 (Fragmentation Test- IS 17004)	-	-	-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	-	-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	-	-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	-	-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	-	-
5.2.5.1( Resistance to shock- IS 17004)	-	-	-
5.2.5.2( Resistance to human impact- IS 17004)	-	-	-
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	-	-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	-	-
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	-	-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	-	-
5.3.2.1( Dimensions and squareness- Width )	-	-	-
5.3.2.1( Dimensions and squareness- Length)	-	-	-
5.3.2.1( Dimensions and squareness-Squareness)	-	-	-
5.3.2.2 (Edge displacement)	-	-	-
5.3.3( Light Stability Test-IS 17004)	-	-	-
5.3.3( Light Stability Test-IS 17004)	-	-	-
5.3.4( Boil and Bake Tests-IS 17004)	-	-	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	-	-
5.3.6.1( Spot defects in the central area)	-	-	-
5.3.6.2 (Linear defects in the central area)	-	-	-
5.3.6.3( Defects in the outer area for framed edges)	-	-	-
5.3.6.6( Defects on edge which will not be framed)	-	-	-
5.3.8( Resistance to Human Impact Test)	-	-	-
5.2.1(Thickness)	-	-	-
5.2.2(Dimension and Squarenes)	-	-	-
5.2.4(Overall Bow)	-	-	-
5.2.4(Measurement of wave and roller wave)	-	-	-
5.2.4(Edge lift)	-	-	-
5.2.4(Local distortion)	-	-	-
5.2.3(Fragmentation test)	-	-	-
5.2.7(Four point bending)	-	-	-
5.2.5.1(Resistance to shock)	-	-	-
5.2.5.2(Resistance to human impact)	-	-	-
5.3.1(Thickness test)	-	-	-
5.3.2.1(Dimension and Squarenes test)	-	-	-
5.3.6(Defects in central area test)	-	-	-
5.3.6.7(Defects in central area test)	-	-	-
5.3.5(Fracture and adhesion)	-	-	-
5.3.8(Resistance to human impact)	-	-	-
5.3.4(Boil test)	-	-	-
5.3.4(Bake test)	-	-	-
5.3.7(Humidity test with condensation)	-	-	-
5.3.7(Humidity test without condensation)	-	-	-
5.3.3(Light stability test)	-	-	-
5.3.2.2(Edge displacement test)	-	-	-
5.2.2(5.2.2 Dimension and Squarenes test)	-	-	-
5.2.4(measurement of wave and roller wave)	-	-	-
5.2.8(Fabrication in Glass)	-	-	-
Cl. No. 5.2.2.3.1, Table No. 1A(Shape accuracy, girth and length)	-	-	-
Cl. No. 5.2.2.3.2(Edge straightness deviation)	-	-	-
Cl. No. 5.2.2.3.3(Maximum cross-curve deviation)	-	-	-
5.2.4.1 (Other distortions)	-	-	-
5.3.6.4( Vents)	-	-	-
5.3.6.5( Creases and streaks)	-	-	-
5.3.7( Humidity Test – Optional)	-	-	-
5.2.6( Surface Compression (Optional)- IS 17004)	-	-	-
5.2.6( Surface Compression (Optional)- IS 17004)	-	-	-
5.2.6(Surface compression)	-	-	-
As per Clause 5.3.9(Laminated Glass)	-	-	-
As per Clause 5.2.8.2(Toughened)	-	-	-
As per Clause 5.2.8.4(Toughened)	-	-	-
As per Clause 5.2.9(Toughened)	-	-	-
As per Clause 5.3.6.4(Laminated Glass)	-	-	-
As per Clause 5.3.6.5(Laminated Glass)	-	-	-
As per Clause 5.3.6.6(Laminated Glass)	-	-	-
As per Clause 5.5.2.1(Laminated Glass and Glass-Plastic Panes)	-	-	-
As per Clause 5.5.3.2(Laminated Glass and Glass-Plastic Panes)	-	-	-
As per Clause 5.6.2(Rigid Plastic Glazing)	-	-	-
As per Clause 5.7.1(Flexible Plastic)	-	-	-
As per Clause 3.7(Wind screen and Panes)	-	-	-
As per Clause 4.1(Wind screen and Panes)	-	-	-

14 Nov, 2027

-
Complete testing charges for Toughened safety glass (for mandatory test only)- Rs. 21,500/- Complete testing charges for Laminated safety glass (for mandatory test only)- Rs. 47,500/- Complete testing charges for Toughened safety glass (including optional tests)- Rs. 70,500/- Complete testing charges for Laminated safety glass (including optional tests)- Rs. 96,500/-

IS 3315 (2019)

Evaporative air coolers (Desert Coolers?) - Specification (Third Revision)

67500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
15.3(BIS Certification Marking)	-	1000	-
15( MARKING AND INFORMATION)	-	1000	-
10.5( Stable Operating Conditions)	-	5500	-
10.2(Standard Ratings)	-	1000	-
10(GENERAL TEST CONDITIONS)	-	5500	-
9.5( Energy Consumption)	-	12500	-
9.3(Noise Level)	-	12500	-
9(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	1500	-
8.3.1 ,8.4.2, & 6.2(Cooling Efficiency and Air Delivery Test)	-	25000	-
8.2.8, 8.4.3,& 6.2©(Power Consumption Test)	-	25000	-
8.2.7( Finish )	-	5500	-
8.2.6( Earthing Connections Tests)	-	4500	-
8.2.5( Leakage Current)	-	4500	-
8.2.4(Insulation Resistance Test)	-	4500	-
8.2.3 (High Voltage Tests)	-	4500	-
8.2.2(Protection against Electric Shock )	-	4500	-
6(PERFORMANCE REQUIREMENTS)	-	1500	-
15.3(BIS Certification Marking)	-	1000	-
15( MARKING AND INFORMATION)	-	1000	-
10.5( Stable Operating Conditions)	-	5500	-
10.2(Standard Ratings)	-	1500	-
10(GENERAL TEST CONDITIONS)	-	1000	-
9.5( Energy Consumption)	-	12500	-
9.3(Noise Level)	-	12500	-
9(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	1500	-
8.3.1 ,8.4.2, & 6.2(Cooling Efficiency and Air Delivery Test)	-	25000	-
8.2.8, 8.4.3,& 6.2©(Power Consumption Test)	-	25000	-
8.2.7( Finish )	-	1500	-
8.2.6( Earthing Connections Tests)	-	5000	-
8.2.5( Leakage Current)	-	5000	-
8.2.4(Insulation Resistance Test)	-	5000	-
8.2.3 (High Voltage Tests)	-	5000	-
8.2.2(Protection against Electric Shock )	-	5000	-
6(PERFORMANCE REQUIREMENTS)	-	1500	-
5(Manufacture and construction)	-	1500	-
7(Electrical equipment)	-	5000	-
8.2.1(General running tests)	-	5000	-
8.3.2(Rated frequency)	-	5000	-
8.4.1 a)(Verification of marking)	-	1000	-

14 Nov, 2027

-
-

IS 1391 : Part 2 (2023)

Room Air Conditioners Specification Part 2 Split Air Conditioners Fourth Revision

630000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Construction )("The air conditioner and its parts shall be constructed with the strength and rigidity adequate for normal conditions of handling, transport, and usage.")	-	5000	-
5.2((Electrically Charged Parts))	-	25000	-
5.3((Refrigerant Circuit))	-	25000	-
5.4((Provision for Earthing))	-	25000	-
5.5((Air Filter))	-	25000	-
5.6((Temperature Sensing Controls))	-	85000	-
5.7((Hermetic Compressors))	-	625000	-
5.8((Heat Exchanger))	-	258000	-
5.9((Motors))	-	25000	-
6((RATING REQUIREMENTS))	-	5000	-
7(RATINGS BASED ON FUNCTION)	-	5000	-
8(RATING AND TEST CONDITIONS)	-	5000	-
8.1(Cooling Test)	-	50000	-
8.1.2((Maximum Operating Test Conditions))	-	50000	-
8.1.3((Freeze-Up Test Conditions))	-	50000	-
8.1.4((Enclosure Sweat Test Conditions))	-	50000	-
8.2((Heating Test))	-	50000	-
8.2.1((Heating Capacity Test Conditions))	-	50000	-
"8.2.2((Heating by Heat Pump Overload Rating Test Conditions (Maximum Heating Performance Test))")	-	50000	-
"8.3((Method of Measurement of Indian Seasonal Energy Efficiency Ratio (ISEER))")	-	50000	-
9((PERFORMANCE REQUIREMENTS))	-	50000	-
9.1((Variations Allowed in Performance Test Conditions))	-	50000	-
9.2((Safety))	-	50000	-
9.3((Power Factor Test))	-	150000	-
9.4((Maximum Operating Conditions Test))	-	150000	-
9.5((Freeze-Up Tests))	-	150000	-
9.5.3((Air Blockage Test))	-	150000	-
9.5.4(( Drip Test))	-	150000	-
9.6((Enclosure Sweat Test))	-	150000	-
9.7((Power Consumption Test for Cooling))	-	150000	-
9.8((Power Consumption Test for Heating by Heat Pump))	-	150000	-
9.9(( Cooling Capacity Test))	-	150000	-
9.10((Heating Capacity Test))	-	150000	-
"9.11((Method of Measurement of Indian Seasonal Energy Efficiency Ratio (ISEER))")	-	150000	-
9.12((Maximum Heating Performance Test))	-	150000	-
9.13((Sound Pressure Test))	-	100000	-
10((CALCULATIONS))	-	15000	-
11((INSTRUMENTS))	-	15000	-
12.1((Classification of Tests))	-	15000	-
12.2.1((General Running Test))	-	100000	-
12.2.2(( Leakage Test))	-	25000	-
12.2.3((High Voltage Test))	-	25000	-
12.2.4(Leakage Current Test))	-	25000	-
"12.2.5(Provisions for Earthing (Earth Resistance Test)")	-	25000	-
12.3.3(Safety Tests)	-	25000	-
12.4(Acceptance Test)	-	250000	-
12.4.1(Performance Test)	-	150000	-
12.4.2(Pressure Test or Leakage Test)	-	25000	-
12.4.3(Leakage Current Test)	-	25000	-
13(MARKING)	-	25000	-

14 Nov, 2027

-
-

IS 7872 (2020)

Deep Freezers - Specification ( Second Revision )

150000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.2.12(Temperature rise test)	-	50000	-
10.2.11(Measurement )	-	25000	-
10.2.10.1(Test packages and life time)	-	20000	-
10.2.10(Full load test)	-	50000	-
10.2.8(Earth resistance test )	-	25000	-
10.2.7(Leakage current test )	-	20000	-
10.2.6(Insulation resistance test)	-	20000	-
10.2.5(High voltage test)	-	20000	-
10.2.3(Thermal insulation test )	-	20000	-
10.2.2(Machanical strength of shelves and similar components)	-	50000	-
10.2.1(Door seal test )	-	50000	-
9.2.2(Power consumption & percentage running time)	-	150000	-
9.2.1(Pull down time)	-	75000	-
9.1(No load test)	-	50000	-
6.11(Volume measurement Water fill method)	-	75000	-
6(Measurement of freezer storage capacity)	-	50000	-
5.1(Sound level)	-	50000	-
5.6(External surface condensation test)	-	50000	-
5.5(Strength Pressure test for components)	-	50000	-
4.8(Doors & Fittings)	-	75000	-
13(Marking and Instruction)	-	20000	-
11.7(Pressure Test)	-	50000	-
11.6(Thermal Insulation Test ( External Condensation))	-	25000	-
11.5(Mechanical Strength of Shelves and Similar Components)	-	20000	-
11.4(Door Seal Test)	-	20000	-
11.3(Temperature Rise Test)	-	50000	-
11.2(Energy Consumption Test)	-	150000	-
11.1(No load Pull down Test)	-	75000	-
8(Freezer Storage Capacity)	-	75000	-
7(Sound Pressure Level)	-	75000	-
6(Safety Requirements)	-	50000	-
5.4.4(Fatigue Test)	-	50000	-
5.4.3(Individual Strength - Pressure Test)	-	50000	-
5.4.2(Individual Strength - Pressure Test)	-	50000	-
4.8(Door and Fittings)	-	75000	-
13(Marking and Instruction)	-	15000	-
11.7(Pressure Test)	-	20000	-
11.6(Thermal Insulation Test ( External Condensation))	-	50000	-
11.5(Mechanical Strength of Shelves and Similar Components)	-	50000	-
11.4(Door Seal Test)	-	50000	-
11.3(Temperature Rise Test)	-	50000	-
11.2(Energy Consumption Test)	-	150000	-
11.1(No load Pull down Test)	-	50000	-
8(Freezer Storage Capacity)	-	50000	-
7(Sound Pressure Level)	-	75000	-
6(Safety Requirements)	-	50000	-
5.4.4(Fatigue Test)	-	50000	-
5.4.3(Individual Strength - Pressure Test)	-	50000	-
5.4.2(Individual Strength - Pressure Test)	-	50000	-
4.8(Door and Fittings)	-	50000	-
5(Refrigeration system)	-	50000	-

14 Nov, 2027

-
-

First
Prev
1
2
3
4
Next
Last

Bureau of Indian Standards

The National Standards Body of India

Ace Test Labs & Metrology Pvt. Ltd., Sonipat

PLOT NO. 68, HSIIDC, INDUSTRIAL ESTATE,RAI, SONIPAT, Sonipat, Haryana, 131029

8816921177 info@acetestgroup.com

Scope List