BIS - LIMS (Laboratory Information Management System)

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET) : IPT-BHUBANESWAR

B/25, C.N.I complex, Patia, Bhubaneswar, BHUBANESWAR, Khordha, Odisha, 751024

7566177001 cipetbbsr@gmail.com

Scope List

Reset

94 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 2508 (2016)

Polyethylene films and sheets - Specification (Third Revision)

Type-I,II,III,IV

28400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.4(Density, Cl.5 of IS 13360(Part-3/Section-1))	-	500.00	nil
5.1.5(Melt Flow Index. Cl 6, 7 of IS 13360(Part-4/Section-1))	-	1100.00	nil
5.1.6a(Carbon Black Content, Annex-A)	-	925.00	nil
5.1.6b(Ash Content, Annex-A)	-	950.00	nil
5.1.6c(Carbon Black Dispersion, Cl.16 of IS 2530)	-	700.00	nil
5.2.2(Tolerance on Thickness, Annex-A)	-	500.00	nil
6.1, Table 1(Tensile strength at break. A) Machine Direction. IS 13360 (Part 5/Sec 1))	-	1350.00	nil
6.1, Table 1(Tensile strength at break. B) Transverse Direction. IS 13360 (Part 5/Sec 3))	-	1100.00	nil
6.1, Table 1(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 )	-	4300.00	nil
6.1, Table 1(Elongation at break ,A) Machine direction .IS 13360(Part-5/sec-1) )	-	0	nil
6.1, Table 1(Elongation at break ,B) Cross-machine direction..IS 13360(Part-5/sec-3) )	-	0	nil
6.1, Table 1(Dartimpact strength Method B of IS 13360 (Part-5/sec-6) )	-	1000.00	nil
6.1, Table 1(Tear resistence. A) Machine direction Annex B)	-	1000.00	nil
6.1, Table 1(Tear resistence. B) Transverse direction )	-	750.00	nil
7.1. Table 2(Tensile strength at break A) Machine direction IS 13360 (Part-5/sec-1) )	-	0	nil
7.1. Table 2(Tensile strength at break,B) Crosse machine direction IS 13360 (Part-5/sec-3) )	-	0	nil
7.1. Table 2(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 )	-	0	nil
7.1. Table 2(Elongation at break , A) Machine direction IS 13360 (Part-5/sec-3) IS 13360 (Part-5/sec-1) )	-	0	nil
7.1. Table 2(Elongation at break , A) Transverse direction IS 13360 (Part-5/sec-3) )	-	0	nil
7.1. Table 2(Dart impact strenght , Method A of IS 3360 (Part-5/sec-6) )	-	0	nil
8.1, Table 3(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	1350.00	nil
8.1, Table 3(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	nil
8.1, Table 3(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	nil
8.1, Table 3(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	nil
8.1, Table 3(Tear resistance , Annex B)	-	1000.00	nil
8.1, Table 3(Puncture resistance , Annex C)	-	1100.00	nil
9.1, Table 4(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	nil
9.1, Table 4(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	nil
9.1, Table 4(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	nil
9.1, Table 4(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	nil
9.1, Table 4(Tear resistance , Annex B)	-	1000.00	nil
9.1, Table 4(Puncture resistance , Annex C)	-	1100.00	nil
5.1.1(Appearance)	-	300.00	nil
5.1.2(Film Form)	-	0	nil
5.1.3(Odour)	-	0	nil

31 Dec, 2026

-
-

IS 16187 (2014)

Textiles - High density polyethylene (HDPE)/ polypropylene (PP) leno woven sacks for packaging and storage of fruits and vegetables - Specification

Textiles-High density polyethylene polypropylene (PP) l

27230 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Raw Material - The tape shall be manufactured from virgin food grade high density polyethylene (HDPE)/polypropylene (PP))	-	1500	-
Clause no. 3.1(Density)	-	525	-
Clause no. 3.1(Melt flow Index)	-	825	-
3.2(Fabric - The fabric used in the manufacture of HDPE/PP leno woven sacks shall be woven as a tube on circular loom from HDPE/PP tapes having width in the range of 2.0-2.5 mm)	-	1500	-
3.3.1(Sack - Leno sacks fabricated out of woven fabric shall have seam at the bottom and/or side.The stitching shall be done with two rows of either lock stitch or chain stitch)	-	375	-
3.3.2(The tape or thread used for stitching shall have at least 20 percent higher denier than that used for making of the sack)	-	375	-
3.3.3(Sack - Bag Mouth)	-	375	-
3.3.4("Sack - sacks shall have nominal holding capacities of 25 kg and Type 2, sacks shall have nominal holding capacities of 50 kg")	-	375	-
4.1- Table 1- i)(Requirements of HDPE/PP Leno Woven Sacks - Capacity)	-	375	-
4.1- Table 1- ii)(Requirements of HDPE/PP Leno Woven Sacks - Dimensions, cm a) Inside length b) Inside width)	-	375	-
4.1- Table 1- iii)(Requirements of HDPE/PP Leno Woven Sacks - Mass of fabric, g/m2)	-	375	-
4.1- Table 1- iv)(Requirements of HDPE/PP Leno Woven Sacks - Ends per dm)	-	375	-
4.1- Table 1- v)(Requirements of HDPE/PP Leno Woven Sacks - Picks per dm)	-	750	-
4.1- Table 1- vi)(Requirements of HDPE/PP Leno Woven Sacks - Average breaking strength of fabric (cut strip method), N (kgf) a) Lengthwise b) Widthwise)	-	1475	-
4.1- Table 1- vii)(Requirements of HDPE/PP Leno Woven Sacks - Average breaking strength of bottom /side seam (cut strip method), N (kgf))	-	975	-
4.2(Requirements - UV Resistance)	-	10180	-
4.3(Requirements - Mass of Bale As per Annex C)	-	375	-
5.1(LABELLING, PACKING AND MARKING - Labelling on Sacks)	-	0	-
Clause no. 3.1(Raw Material, as applicable: PP Granules (IS 10910) Overall Migration)	-	1775	-
Clause no. 3.1(Lead)	-	2250	-
Clause no. 3.1(Arsenic)	-	0	-
Clause no. 3.1(Mercury)	-	0	-
Clause no. 3.1(Cadmium)	-	0	-
Clause no. 3.1(Zinc)	-	0	-
Clause no. 3.1(Raw Material, as applicable: HDPE Granules (IS7328))	-	0	-
Clause no. 3.1(Density)	-	525	-
Clause no. 3.1(Melt flow Index)	-	825	-
Clause no. 3.1(Lead)	-	0	-
Clause no. 3.1(Arsenic)	-	0	-
Clause no. 3.1(Mercury)	-	0	-
Clause no. 3.1(Cadmium)	-	0	-
Clause no. 3.1(Zinc)	-	0	-
3.1(Raw Material - The tape shall be manufactured from virgin food grade high density polyethylene (HDPE)/polypropylene (PP))	-	0	-
3.2(Fabric - The fabric used in the manufacture of HDPE/PP leno woven sacks shall be woven as a tube on circular loom from HDPE/PP tapes having width in the range of 2.0-2.5 mm)	-	375	-
3.3.1(Sack - Leno sacks fabricated out of woven fabric shall have seam at the bottom and/or side.The stitching shall be done with two rows of either lock stitch or chain stitch)	-	0	-
3.3.2(The tape or thread used for stitching shall have at least 20 percent higher denier than that used for making of the sack)	-	0	-
3.3.3(Sack - Bag Mouth)	-	0	-
3.3.4("Sack - sacks shall have nominal holding capacities of 25 kg and Type 2, sacks shall have nominal holding capacities of 50 kg")	-	0	-
4.1- Table 1- i)(Requirements of HDPE/PP Leno Woven Sacks - Capacity)	-	0	-
4.1- Table 1- ii)(Requirements of HDPE/PP Leno Woven Sacks - Dimensions, cm a) Inside length b) Inside width)	-	0	-
4.1- Table 1- iii)(Requirements of HDPE/PP Leno Woven Sacks - Mass of fabric, g/m2)	-	0	-
4.1- Table 1- iv)(Requirements of HDPE/PP Leno Woven Sacks - Ends per dm)	-	0	-
4.1- Table 1- v)(Requirements of HDPE/PP Leno Woven Sacks - Picks per dm)	-	0	-
4.1- Table 1- vi)(Requirements of HDPE/PP Leno Woven Sacks - Average breaking strength of fabric (cut strip method), N (kgf) a) Lengthwise b) Widthwise)	-	0	-
4.1- Table 1- vii)(Requirements of HDPE/PP Leno Woven Sacks - Average breaking strength of bottom /side seam (cut strip method), N (kgf))	-	0	-
4.2(Requirements - UV Resistance)	-	0	-
4.3(Requirements - Mass of Bale As per Annex C)	-	375	-
5.1(LABELLING, PACKING AND MARKING - Labelling on Sacks)	-	0	-
5.2(Packing)	-	0	-
5.3(Marking)	-	0	-
6(ATMOSPHERIC CONDITIONS, CONDITIONING AND TESTING)	-	0	-
Clause no. 3.1(Raw Material, as applicable: PP Granules (IS 10910) Overall Migration)	-	0	-
Clause no. 3.1(Lead)	-	0	-
Clause no. 3.1(Arsenic)	-	0	-
Clause no. 3.1(Mercury)	-	0	-
Clause no. 3.1(Cadmium)	-	0	-
Clause no. 3.1(Zinc)	-	0	-
Clause no. 3.1(Raw Material, as applicable: HDPE Granules (IS7328))	-	0	-
Clause no. 3.1(Density)	-	0	-
Clause no. 3.1(Melt flow Index)	-	0	-
Clause no. 3.1(Lead)	-	0	-
Clause no. 3.1(Arsenic)	-	0	-
Clause no. 3.1(Mercury)	-	0	-
Clause no. 3.1(Cadmium)	-	0	-
Clause no. 3.1(Zinc)	-	0	-
3.1(Raw Material - The tape shall be manufactured from virgin food grade high density polyethylene (HDPE)/polypropylene (PP))	-	0	-
3.2(Fabric - The fabric used in the manufacture of HDPE/PP leno woven sacks shall be woven as a tube on circular loom from HDPE/PP tapes having width in the range of 2.0-2.5 mm)	-	0	-
3.3.1(Sack - Leno sacks fabricated out of woven fabric shall have seam at the bottom and/or side.The stitching shall be done with two rows of either lock stitch or chain stitch)	-	0	-
3.3.2(The tape or thread used for stitching shall have at least 20 percent higher denier than that used for making of the sack)	-	0	-
3.3.3(Sack - Bag Mouth)	-	0	-
3.3.4("Sack - sacks shall have nominal holding capacities of 25 kg and Type 2, sacks shall have nominal holding capacities of 50 kg")	-	0	-
4.1- Table 1- i)(Requirements of HDPE/PP Leno Woven Sacks - Capacity)	-	0	-
4.1- Table 1- ii)(Requirements of HDPE/PP Leno Woven Sacks - Dimensions, cm a) Inside length b) Inside width)	-	0	-
4.1- Table 1- iii)(Requirements of HDPE/PP Leno Woven Sacks - Mass of fabric, g/m2)	-	0	-
4.1- Table 1- iv)(Requirements of HDPE/PP Leno Woven Sacks - Ends per dm)	-	0	-
4.1- Table 1- v)(Requirements of HDPE/PP Leno Woven Sacks - Picks per dm)	-	0	-
4.1- Table 1- vi)(Requirements of HDPE/PP Leno Woven Sacks - Average breaking strength of fabric (cut strip method), N (kgf) a) Lengthwise b) Widthwise)	-	0	-
4.1- Table 1- vii)(Requirements of HDPE/PP Leno Woven Sacks - Average breaking strength of bottom /side seam (cut strip method), N (kgf))	-	0	-
4.2(Requirements - UV Resistance)	-	0	-
4.3(Requirements - Mass of Bale As per Annex C)	-	0	-
5.1(LABELLING, PACKING AND MARKING - Labelling on Sacks)	-	0	-
5.2(Packing)	-	0	-
5.3(Marking)	-	0	-
6(ATMOSPHERIC CONDITIONS, CONDITIONING AND TESTING)	-	0	-

31 Dec, 2026

-
iNCLUDED W.E.F.03.07.2025 EXCLUSION Cl 3.1 (pigments & Colours)

IS 6192 (2023)

Textiles Monoaxially oriented high density polyethylene HDPE and polypropylene PP tapes Specification

Pigmented/Unpigmented tapes

25138 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(MATERIAL(Refer IS 7328 :1974))	-	1150.00	-
5.1(Linear density (For test method Refer IS 6193:1971 and IS 7703 Part 1))	-	525	-
5.2(Tenacity (For test method Refer IS 6193:1971))	-	825	-
5.3(Elongation (For test method Refer IS 6193:1971))	-	975	-
5.4(Finished width (For test method Refer IS 6193:1971))	-	375	-
5.5(Thickness (For test method Refer IS 6193:1971))	-	375	-
5.6(Heat Shrinkage at 60 degree C(For test method Refer IS 6193:1971) )	-	1275	-
5.6(Heat Shrinkage at 95 degree C(For test method Refer IS 6193:1971) )	-	0	-
5.7( pigmented tapes(Refer IS 2454))	-	19638	-
4(MATERIAL(Refer IS 7328 :1974))	-	0.00	-
5.1(Linear density (For test method Refer IS 6193:1971 and IS 7703 Part 1))	-	0.00	-
5.2(Tenacity (For test method Refer IS 6193:1971))	-	0.00	-
5.3(Elongation (For test method Refer IS 6193:1971))	-	0.00	-
5.4(Finished width (For test method Refer IS 6193:1971))	-	0	-
5.5(Thickness (For test method Refer IS 6193:1971))	-	0.00	-
5.6(Heat Shrinkage at 60 degree C(For test method Refer IS 6193:1971) )	-	0.00	-
5.6(Heat Shrinkage at 95 degree C(For test method Refer IS 6193:1971) )	-	0.00	-
5.7( pigmented tapes(Refer IS 2454))	-	0.00	-
Cl-4.1(High Density Polyethylene Tapes)	-	0	-
Cl-4.2(Polypropylene Tapes)	-	0	-
Cl-5.1.8(Ash Content)	-	0	-
Cl-6.1(Marking)	-	0	-
Cl-5.1.1(Finished tape width)	-	0	-
Cl-5.1.2(Thickness of the tape)	-	0	-
Cl-5.1.3(Linear density of tape)	-	0	-
Cl-5.1.4(Polypropylene Tapes)	-	0	-
Cl-5.1.5(Average value of the elongation at break of tape)	-	0	-
Cl-5.1.6(UV radiation exposure)	-	0	-
Cl-5.1.7(Average heat shrinkage of HDPE tapes)	-	0	-
Cl-5.1.6(UV stabilized HDPE and PP resins)	-	0	-
Cl-4.1(High Density Polyethylene Tapes)	-	0	-
Cl-4.2(Polypropylene Tapes)	-	0	-
Cl-5.1.8(Ash Content)	-	0	-
Cl-6.1(Marking)	-	0	-
Cl-5.1.1(Finished tape width)	-	0	-
Cl-5.1.2(Thickness of the tape)	-	0	-
Cl-5.1.3(Linear density of tape)	-	0	-
Cl-5.1.4(Polypropylene Tapes)	-	0	-
Cl-5.1.5(Average value of the elongation at break of tape)	-	0	-
Cl-5.1.6(UV radiation exposure)	-	0	-
Cl-5.1.7(Average heat shrinkage of HDPE tapes)	-	0	-
Cl-5.1.6(UV stabilized HDPE and PP resins)	-	0	-
Cl-4.1(High Density Polyethylene Tapes)	-	0	-
Cl-4.2(Polypropylene Tapes)	-	0	-
Cl-5.1.8(Ash Content)	-	0	-
Cl-6.1(Marking)	-	0	-
Cl-5.1.1(Finished tape width)	-	0	-
Cl-5.1.2(Thickness of the tape)	-	0	-
Cl-5.1.3(Linear density of tape)	-	0	-
Cl-5.1.4(Polypropylene Tapes)	-	0	-
Cl-5.1.5(Average value of the elongation at break of tape)	-	0	-
Cl-5.1.6(UV radiation exposure)	-	0	-
Cl-5.1.7(Average heat shrinkage of HDPE tapes)	-	0	-
Cl-5.1.6(UV stabilized HDPE and PP resins)	-	0	-
Cl-4.1(High Density Polyethylene Tapes)	-	0	-
Cl-4.2(Polypropylene Tapes)	-	0	-
Cl-5.1.8(Ash Content)	-	0	-
Cl-6.1(Marking)	-	0	-
Cl-5.1.1(Finished tape width)	-	0	-
Cl-5.1.2(Thickness of the tape)	-	0	-
Cl-5.1.3(Linear density of tape)	-	0	-
Cl-5.1.4(Polypropylene Tapes)	-	0	-
Cl-5.1.5(Average value of the elongation at break of tape)	-	0	-
Cl-5.1.6(UV radiation exposure)	-	0	-
Cl-5.1.7(Average heat shrinkage of HDPE tapes)	-	0	-
Cl-5.1.6(UV stabilized HDPE and PP resins)	-	0	-

31 Dec, 2026

-
Included w.e.f.03.07.2025 Exclusion Cl 4.3

IS 14885 (2022)

Polyethylene Pipes for the Supply of Gaseous Fuels ï¿½ Specification (First Revision)

PE 80 and PE 100(– SDR 17 / SDR 13.6 / SDR 11 / SDR 9)

402000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Grade of material)	-	0	nil
4.3(Nominal Diameter)	-	0	nil
4.4(Colour)	-	0	nil
5.1(Polyethylene compound)	-	4575	nil
5.5(Effect of Gas condensate on the Hydrostatic strength)	-	4750	nil
5.7(PE Compound Quality Evaluation)	-	300000	nil
5.6(Resistance to Weathering)	-	11875	nil
6.1(Outside Diameter)	-	375	nil
6.1(Out of Roundness (Ovality))	-	0.00	nil
6.2(Wall Thickness)	-	375	nil
7(Finish)	-	375	nil
8.1(Internal pressure creep rupture test for plain at 80 deg. C for 165h)	-	8250	nil
8.1(Internal pressure creep rupture test for plain pipes at 20 deg. C for 100h)	-	3500	nil
8.1(Internal pressure creep rupture test for plain pipes at 80 deg. C for 1000 h)	-	4100	nil
8.2(Reversion Test)	-	525	nil
8.3(Density)	-	525	nil
8.6(Thermal Stability (Oxidation Induction Time))	-	1650	nil
8.7(Volatile Matter Content)	-	525	nil
8.8(Tensile Properties (Tensile Yield Strength and Elongation at Break))	-	1475	nil
8.9(Resistance to Weathering)	-	1875	nil
6.4(Length of Pipe)	-	375	nil
8.4(Melt Flow Rate (MFR))	-	825	nil
8.5(Pigment Dispersion)	-	525	nil
8.10(Slow Crack Growth Rate Test)	-	8225	nil
8.11(Squeeze-off)	-	5075	nil
4.2(Grade of material)	-	0.00	-
4.3(Nominal Diameter)	-	0.00	-
4.4(Colour)	-	0	-
5.1(Polyethylene compound)	-	0	-
5.5(Effect of Gas condensate on the Hydrostatic strength)	-	0	-
5.7(PE Compound Quality Evaluation)	-	0.00	-
5.6(Resistance to Weathering)	-	0	-
6.1(Outside Diameter)	-	0	-
6.1(Out of Roundness (Ovality))	-	0.00	-
6.2(Wall Thickness)	-	0.00	-
7(Finish)	-	0	-
8.1(Internal pressure creep rupture test for plain at 80 deg. C for 165h)	-	0	-
8.1(Internal pressure creep rupture test for plain pipes at 20 deg. C for 100h)	-	0	-
8.1(Internal pressure creep rupture test for plain pipes at 80 deg. C for 1000 h)	-	0	-
8.2(Reversion Test)	-	0	-
8.3(Density)	-	0	-
8.6(Thermal Stability (Oxidation Induction Time))	-	0	-
8.7(Volatile Matter Content)	-	0	-
8.8(Tensile Properties (Tensile Yield Strength and Elongation at Break))	-	0	-
8.9(Resistance to Weathering)	-	0.00	-
6.4(Length of Pipe)	-	0.00	-
8.4(Melt Flow Rate (MFR))	-	0	-
8.5(Pigment Dispersion)	-	0	-
8.10(Slow Crack Growth Rate Test)	-	0	-
8.11(Squeeze-off)	-	0	-
4.2(Grade of material)	-	0	-
4.3(Nominal Diameter)	-	0	-
4.4(Colour)	-	0	-
5.1(Polyethylene compound)	-	0	-
5.7(PE Compound Quality Evaluation)	-	0	-
5.5(Effect of Gas condensate on the Hydrostatic strength)	-	0	-
5.6(Resistance to Weathering)	-	42225	-
6.1(Outside Diameter)	-	0	-
6.1(Out of Roundness (Ovality))	-	0	-
6.2(Wall Thickness)	-	0	-
7(Finish)	-	0	-
8.1(Internal pressure creep rupture test for plain at 80 deg. C for 165h)	-	0	-
8.1(Internal pressure creep rupture test for plain pipes at 20 deg. C for 100h)	-	0	-
8.1(Internal pressure creep rupture test for plain pipes at 80 deg. C for 1000 h)	-	0	-
8.2(Reversion Test)	-	0	-
8.3(Density)	-	0	-
8.6(Thermal Stability (Oxidation Induction Time))	-	0	-
8.7(Volatile Matter Content)	-	0	-
8.8(Tensile Properties (Tensile Yield Strength and Elongation at Break))	-	0	-
8.9(Resistance to Weathering)	-	0	-
6.4(Length of Pipe)	-	0	-
8.4(Melt Flow Rate (MFR))	-	0	-
8.5(Pigment Dispersion)	-	0	-
8.10(Slow Crack Growth Rate Test)	-	0	-
8.11(Squeeze-off)	-	0	-
5.1, 5.7 Table 2(i) Conventional density (of base polymer))	-	0	-
5.1, 5.7 Table 2(ii) Melt flow rate (MFR))	-	0	-
5.1, 5.7 Table 2(iii) Thermal stability (oxidation induction time))	-	0	-
5.1, 5.7 Table 2(iv) Volatile content)	-	0	-
5.1, 5.7 Table 2(v) Water content1))	-	0	-
5.1, 5.7 Table 2(vi) Pigment dispersion)	-	0	-
5.1, 5.7 Table 3(iv) Resistance to slow crack growth rate)	-	0	-
5.5(Effects of Gas Condensate on the Hydrostatic Strength)	-	0	-
5.6(ii) Hydraulic characteristics)	-	0	-
5.6(iii) Thermal stability (Oxidation induction time))	-	0	-
6(Dimensions of pipes)	-	0	-
7(Finish)	-	0	-
8.1(Hydraulic Characteristics)	-	0	-
8.2(Reversion test)	-	0	-
8.3(Density)	-	0	-
8.4(Melt Flow Rate)	-	0	-
8.5(Pigment Dispersion)	-	0	-
8.6(Thermal Stability (Oxidation Induction Time))	-	0	-
8.7(Volatile Matter Content)	-	0	-
8.9(Resistance to Weathering)	-	0	-
8.8(Tensile Properties (Tensile Yield Strength and Elongation at Break))	-	0	-
8.10(Slow Crack Growth Rate Test)	-	0	-
8.11(Squeeze-of)	-	0	-
10(Marking)	-	0	-
4.2(Grade of material)	-	0	-
4.3(Nominal Diameter)	-	0	-
4.4(Colour)	-	0	-
5.1(Polyethylene compound)	-	0	-
5.7(PE Compound Quality Evaluation)	-	0	-
5.5(Effect of Gas condensate on the Hydrostatic strength)	-	0	-
5.6(Resistance to Weathering)	-	0	-
6.1(Outside Diameter)	-	0	-
6.1(Out of Roundness (Ovality))	-	0	-
6.2(Wall Thickness)	-	0	-
7(Finish)	-	0	-
8.1(Internal pressure creep rupture test for plain at 80 deg. C for 165h)	-	0	-
8.1(Internal pressure creep rupture test for plain pipes at 20 deg. C for 100h)	-	0	-
8.1(Internal pressure creep rupture test for plain pipes at 80 deg. C for 1000 h)	-	0	-
8.2(Reversion Test)	-	0	-
8.3(Density)	-	0	-
8.6(Thermal Stability (Oxidation Induction Time))	-	0	-
8.7(Volatile Matter Content)	-	0	-
8.8(Tensile Properties (Tensile Yield Strength and Elongation at Break))	-	0	-
8.9(Resistance to Weathering)	-	0	-
6.4(Length of Pipe)	-	0	-
8.4(Melt Flow Rate (MFR))	-	0	-
8.5(Pigment Dispersion)	-	0	-
8.10(Slow Crack Growth Rate Test)	-	0	-
8.11(Squeeze-off)	-	0	-
5.1, 5.7 Table 2(i) Conventional density (of base polymer))	-	0	-
5.1, 5.7 Table 2(ii) Melt flow rate (MFR))	-	0	-
5.1, 5.7 Table 2(iii) Thermal stability (oxidation induction time))	-	0	-
5.1, 5.7 Table 2(iv) Volatile content)	-	0	-
5.1, 5.7 Table 2(v) Water content1))	-	0	-
5.1, 5.7 Table 2(vi) Pigment dispersion)	-	0	-
5.1, 5.7 Table 3(iv) Resistance to slow crack growth rate)	-	0	-
5.5(Effects of Gas Condensate on the Hydrostatic Strength)	-	0	-
5.6(ii) Hydraulic characteristics)	-	0	-
5.6(iii) Thermal stability (Oxidation induction time))	-	0	-
6(Dimensions of pipes)	-	0	-
7(Finish)	-	0	-
8.1(Hydraulic Characteristics)	-	0	-
8.2(Reversion test)	-	0	-
8.3(Density)	-	0	-
8.4(Melt Flow Rate)	-	0	-
8.5(Pigment Dispersion)	-	0	-
8.6(Thermal Stability (Oxidation Induction Time))	-	0	-
8.7(Volatile Matter Content)	-	0	-
8.9(Resistance to Weathering)	-	0	-
8.8(Tensile Properties (Tensile Yield Strength and Elongation at Break))	-	0	-
8.10(Slow Crack Growth Rate Test)	-	0	-
8.11(Squeeze-of)	-	0	-
10(Marking)	-	0	-

31 Dec, 2026

-
Included w.e.f.03.07.2025 Exclusion Cl 5.3, Cl 5.4

Bureau of Indian Standards

The National Standards Body of India

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET) : IPT-BHUBANESWAR

B/25, C.N.I complex, Patia, Bhubaneswar, BHUBANESWAR, Khordha, Odisha, 751024

7566177001 cipetbbsr@gmail.com

Scope List