BIS - LIMS (Laboratory Information Management System)

Atckon Laboratories LLP, Bahadurgarh

Plot NO. 45, Part A M.I.E, Bahadurgarh, Jhajjar, Haryana, Bahadurgarh, Jhajjar, Haryana, 124507

8570906101 info@atckonlabs.com

Scope List

Reset

114 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 7485 : Part 2 (2018)

Countersunk flat head screws (common head style) with type H or Type Z Cross Recess - Product Grade A part 2 Steel Screws of Property Class 8.8, Stainless Steel Screws and Non - Ferrous Metal Screws ( Third Revision)

ALL TYPES

19000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Dimensions)	-	4000	-
4, table 2(Material)	-	15000	-
4, table 2(Thread)	-	15000	-
4, table 2(Mechanical property)	-	15000	-
4, table 2(Tolerances)	-	15000	-
4, table 2(Cross recess)	-	15000	-
4, table 2(Finish - coating)	-	15000	-
4, table 2(Surface integrity)	-	15000	-
4, table 2(Acceptability)	-	15000	-
5(Designation)	-	4000	-

19 Jun, 2028

-
Included w.e.f 26.11.2025

IS 7485 : Part 1 (2018)

Countersunk Flat Head Screws (Common head Style) With Type H or Type Z Cross Recess - Product Grade A Part 1 Steel Screws of Property Class 4.8 ( Third Revision)

ALL TYPES

19000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Dimensions)	-	4000	-
4, table 2(Material)	-	15000	-
4, table 2(General requirements)	-	15000	-
4, table 2(Thread)	-	15000	-
4, table 2(Mechanical property)	-	15000	-
4, table 2(Tolerances)	-	15000	-
4, table 2(Cross recess)	-	15000	-
4, table 2(Finish - coating)	-	15000	-
4, table 2(Surface integrity)	-	15000	-
4, table 2(Acceptability)	-	15000	-
5(Designation)	-	4000	-

19 Jun, 2028

-
Included w.e.f 26.11.2025

IS 1363 : Part 3 (2018)

Hexagon Head Bolts, Screws and Nuts of Product Grade ˜C ™ Part 3 (Style 1) Hexagon Nuts ( Size Range M 5 to M 64 ) ( Fifth Revision )

ALL TYPES

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3-Table 1(Dimensions-D)	-	15000	-
3-Table 1(Dimensions-P)	-	15000	-
3-Table 1(Dimensions-dw(minimum))	-	15000	-
3-Table 1(Dimensions-e(minimum))	-	15000	-
3-Table 1(Dimensions-m(minimum))	-	15000	-
3-Table 1(Dimensions-m(maximum))	-	15000	-
3-Table 1(Dimensions-mw(minimum))	-	15000	-
3-Table 1(Dimensions-s(minimum))	-	15000	-
3-Table 1(Dimensions-s(maximum))	-	15000	-
3-Table 2(Dimensions-D)	-	15000	-
3-Table 2(Dimensions-P)	-	15000	-
3-Table 2(Dimensions-dw(minimum))	-	15000	-
3-Table 2(Dimensions-e(minimum))	-	15000	-
3-Table 2(Dimensions-m(minimum))	-	15000	-
3-Table 2(Dimensions-m(maximum))	-	15000	-
3-Table 2(Dimensions-mw(minimum))	-	15000	-
3-Table 2(Dimensions-s(minimum))	-	15000	-
3-Table 2(Dimensions-s(maximum))	-	15000	-
4-Table 3(General requirements)	-	15000	-
4-Table 3(Threads-ISO 724 & 965(1))	-	15000	-
4-Table 3(Mechanical property-Property class (ISO 898-1))	-	15000	-
4-Table 3(Mechanical property-Tensile strength (ISO 898-1))	-	15000	-
4-Table 3(Mechanical property-Lower yield strength (ISO 898-1) )	-	15000	-
4-Table 3(Mechanical property-Stress at 0,2 % non-proportional elongation (ISO 898-1))	-	15000	-
4-Table 3(Mechanical property-Stress at 0,0048d non-proportional elongation for full-size fasteners (ISO 898-1))	-	15000	-
4-Table 3(Mechanical property-Stress under proof load (ISO 898-1))	-	15000	-
4-Table 3(Mechanical property-Proof strength ratio (ISO 898-1))	-	15000	-
4-Table 3(Mechanical property-Percentage elongation after fracture for machined test pieces (ISO 898-1))	-	15000	-
4-Table 3(Mechanical property-Percentage reduction of area after fracture for machined test pieces (ISO 898-1))	-	15000	-
4-Table 3(Mechanical property-Elongation after fracture for full-size fasteners (ISO 898-1))	-	15000	-
4-Table 3(Mechanical property-Head soundness (ISO 898-1))	-	15000	-
4-Table 3(Mechanical property-Vickers hardness (ISO 898-1))	-	15000	-
4-Table 3(Mechanical property-Brinell hardness (ISO 898-1))	-	15000	-
4-Table 3(Mechanical property-Rockwell hardness (ISO 898-1) HRB)	-	15000	-
4-Table 3(Mechanical property-Rockwell hardness (ISO 898-1) HRC)	-	15000	-
4-Table 3(Mechanical property-Surface hardness (ISO 898-1))	-	15000	-
4-Table 3(Mechanical property-Non-carburization (ISO 898-1))	-	15000	-
4-Table 3(Mechanical property-Height of non-decarburized thread zone (ISO 898-1))	-	15000	-
4-Table 3(Mechanical property-Depth of complete decarburization in the thread (ISO 898-1))	-	15000	-
4-Table 3(Mechanical property-Reduction of hardness after retempering (ISO 898-1))	-	15000	-
4-Table 3(Mechanical property-Breaking torque (ISO 898-1))	-	15000	-
4-Table 3(Mechanical property-Impact strength (ISO 898-1))	-	15000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Quench Cracks(ISO 6157-1))	-	15000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging cracks (ISO 6157-1))	-	15000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts (ISO 6157-1)- Chamfer Circle)	-	15000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts (ISO 6157-1))	-	15000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts-Hexagon head screw (ISO 6157-1))	-	15000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts-Circular head screws (ISO 6157-1))	-	15000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging Bursts-Circular head screws (ISO 6157-1))	-	15000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts (ISO 6157-1) (Chamfer Circle))	-	15000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts (ISO 6157-1))	-	15000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screw (ISO 6157-1))	-	15000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear Bursts-Circular head screws (ISO 6157-1))	-	15000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Circular head screws (ISO 6157-1))	-	15000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Raw material seams and laps (ISO 6157-1))	-	15000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Voids (ISO 6157-1))	-	15000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Folds (ISO 6157-1))	-	15000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Tool marks (ISO 6157-1))	-	15000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Damages (ISO 6157-1) (Impairs Usability))	-	15000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Damages (ISO 6157-1))	-	15000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-- Quench cracks (ISO 6157-3))	-	15000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks - (ISO 6157-3))	-	15000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts (ISO 6157-3) Chamfer Circle)	-	15000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts (ISO 6157-3))	-	15000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts-Hexagon head screw (ISO 6157-3))	-	15000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts-Circular head screws (ISO 6157-3))	-	15000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts-Circular head screws (ISO 6157-3))	-	15000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screws-Width (ISO 6157-3))	-	15000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screws-Depth (ISO 6157-3))	-	15000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screws (ISO 6157-3))	-	15000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screws (ISO 6157-3))	-	15000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screws (ISO 6157-3))	-	15000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Circular head screws - (ISO 6157-3))	-	15000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Circular head screws - (ISO 6157-3))	-	15000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	15000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	15000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	15000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	15000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	15000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	15000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	15000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Raw material, seams and laps- (ISO 6157-3))	-	15000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Voids- (ISO 6157-3))	-	15000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Folds- (ISO 6157-3))	-	15000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Tool marks - (ISO 6157-3))	-	15000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Laps on the thread - (ISO 6157-3))	-	15000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Laps on the thread - (ISO 6157-3))	-	15000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Damages - (ISO 6157-3))	-	15000	-

19 Jun, 2028

-
Included w.e.f 26.11.2025

IS 1364 : Part 6 (2018)

Hexagon Head Bolts, Screws and Nuts of Product Grades A and B Part 6 Hexagon Nuts, Style 2 ( First Revision )

ALL SIZES

24000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Dimensions)	-	4000	-
4, table 3(General requirements)	-	20000	-
4, table 3(Thread)	-	20000	-
4, table 3(Mechanical properties)	-	20000	-
4, table 3(Tolerances)	-	20000	-
4, table 3(Finish-coating)	-	20000	-
4, table 3(Surface integrity)	-	20000	-
4, table 3(Acceptability)	-	20000	-
5(Designation)	-	4000	-

19 Jun, 2028

-
Included w.e.f 26.11.2025

IS 1364 : Part 4 (2003)

Hexagon head bolts, screws and nuts of product grades A and B: Part 4 hexagon thin nuts (Chamfered) (Size Range M1.6t0 M64) (Fourth Revision)

ALL TYPES

24000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Dimensions)	-	4000	-
4, table 3(General requirements)	-	20000	-
4, table 3(Thread)	-	20000	-
4, table 3(Mechanical properties)	-	20000	-
4, table 3(Tolerances)	-	20000	-
4, table 3(Finish-coating)	-	20000	-
4, table 3(Surface integrity)	-	20000	-
4, table 3(Acceptability)	-	20000	-
5(Designation)	-	4000	-

19 Jun, 2028

-
Included w.e.f 20.11.2025

IS 1364 : Part 3 (2018)

Hexagon Head Bolts, Screws and Nuts of Product Grades A and B Part 2 Hexagon Head Screws ( Size Range M 1.6 to M 64 ) ( Fifth Revision )

ALL TYPES

22500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 3(Dimension)	-	5000	-
Cl. 4 and Table 3(Threads and tolerances)	-	17500	-
Cl. 4 and Table 3(Mechanical Properties)	-	17500	-
Cl. 4 and Table 3(Finish – Coating)	-	17500	-
Cl. 4 and Table 3(Surface integrity)	-	17500	-

19 Jun, 2028

-
Included w.e.f 20.11.2025

IS 1364 : Part 2 (2023)

Hexagon head bolts screws and nuts of product grades A and B Part 2 Hexagon head screws (Size range M1.6 to M64 ) (Sixth revision of IS 1364 (Part 2))

ALL TYPES

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(Dimensions)	-	5000	-
Cl-5, Table-5(General requirements)	-	10000	-
Cl-5, Table-5(Thread-Tolerance class)	-	10000	-
Cl-5, Table-5(Mechanical properties-Steel)	-	10000	-
Cl-5, Table-5(Mechanical properties-Stainless steel)	-	10000	-
Cl-5, Table-5(Tolerances- Product grade)	-	10000	-
Cl-5, Table-5(Surface condition -Electroplated coatings)	-	10000	-
Cl-5, Table-5(Surface condition- Non-electrolytically applied zinc flake)	-	10000	-
Cl-5, Table-5(Surface condition - Hot dip galvanized coatings)	-	10000	-
Cl-5, Table-5("Surface integrity -Limits for surface discontinuities")	-	10000	-
Cl-6(Marking)	-	5000	-

19 Jun, 2028

-
Included w.e.f 20.11.2025

IS 1364 : Part 1 (2023)

Hexagon head bolts, screws, and nuts of property grades A and B: Part 1 Hexagon head bolts (Size range M1.6 to M64) (sixth revision)

ALL TYPES

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(Dimensions)	-	4000	-
Cl-5, Table-7(General requirements)	-	10000	-
Cl-5, Table-7(Thread-Tolerance class)	-	10000	-
Cl-5, Table-7(Mechanical properties- Steel)	-	10000	-
Cl-5, Table-7(Mechanical properties-Stainless steel)	-	10000	-
Cl-5, Table-7(Tolerances-Product grade)	-	10000	-
Cl-5, Table-7(Surface condition -Electroplated coatings)	-	10000	-
Cl-5, Table-7(Surface condition- Non-electrolytically applied zinc flake)	-	10000	-
Cl-5, Table-7(Surface condition - Hot dip galvanized coatings)	-	10000	-
Cl-5, Table-7(Surface integrity- Limits for surface discontinuities)	-	10000	-
Cl-6(Marking)	-	4000	-

19 Jun, 2028

-
Included w.e.f 20.11.2025

IS 1363 : Part 2 (2023)

Hexagon head bolts, screws and nuts of product grade C Part 2 Hexagon head screws (Size range M5 to M64) (sixth revision)

All Types

16500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Dimensions)	-	5000	-
5- Table 4 -(i)(General requirements)	-	10000	-
5- Table 4 -(ii)(Thread)	-	10000	-
5- Table 4 -(iii)(Mechanical properties)	-	10000	-
5- Table 4 -(iv)(Tolerances)	-	10000	-
5- Table 4 -(v)(Surface condition)	-	10000	-
5- Table 4 -(vi)(Surface integrity)	-	10000	-
5- Table 4 -(vii)(Acceptability)	-	10000	-
6(Marking and labelling)	-	1000	-
7(Designation)	-	1000	-
4(Finish -Electrolite zinc coating)	-	1500	-

19 Jun, 2028

-
Included w.e.f 20.11.2025

IS 1363 : Part 1 (2023)

Hexagon head bolts, screws and nuts of product grade C Part 1 Hexagon head bolts (Size range M5 to M64) (sixth revision)

All Types

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Dimensions)	-	4000	-
5 - Table 5 (i)(General requirements)	-	10000	-
5 - Table 5 (ii)(Thread)	-	10000	-
5 - Table 5 (iii)(Mechanical properties)	-	10000	-
5 - Table 5 (iv)(Tolerances)	-	10000	-
5 - Table 5 (v)(Surface condition)	-	10000	-
5 - Table 5 (vi)(Surface integrity)	-	10000	-
5 - Table 5 (vii)(Acceptability)	-	10000	-
6(Marking and labelling)	-	1000	-
7(Designation)	-	1000	-

19 Jun, 2028

-
Included w.e.f 20.11.2025

IS 208 (2020)

Door Handles - Specification ( Sixth Revision )

ALL GRADES

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10(PACKING)	-	7000	-
9.1(BIS Certification Marking)	-	7000	-
9(MARKING)	-	7000	-
6.2(Tolerance)	-	7000	-
6.1 Table2A & 2B and Fig 1,2,3,4(DIMENSIONS - Size 1. No. in each Lug 2. No. in a plate when a continious plate is used 3. Size Designation of Counter-sunk Head Wood Screws (as per IS 6760: 1972))	-	7000	-
6.1 Table2A & 2B and Fig 1,2,3,4(DIMENSIONS - Size (A,B,C,D,E,F,G,H,I))	-	7000	-
5.1(MANUFACTURE- General)	-	7000	-
3(TYPES-Doors handle shall be of the following types according to the materials used:)	-	7000	-
4.2 -Table 1- viii (Ref. Cl 4.1, Table 1 of IS 742 : 1981)(Chemical composition - Zinc- IS 2600:1964)	-	7000	-
4.2 -Table 1- viii (Ref. Cl 4.1, Table 1 of IS 742 : 1981)(Chemical composition - Impurities-Nickel- IS 2600:1964)	-	7000	-
4.2 -Table 1- viii (Ref. Cl 4.1, Table 1 of IS 742 : 1981)(Chemical composition - Impurities-Thallium and Indium- IS 2600:1964)	-	7000	-
4.2 -Table 1- viii (Ref. Cl 4.1, Table 1 of IS 742 : 1981)(Chemical composition - Impurities-Tin- IS 2600:1964)	-	7000	-
4.2 -Table 1- viii (Ref. Cl 4.1, Table 1 of IS 742 : 1981)(Chemical composition - Impurities-Cadmium- IS 2600:1964)	-	7000	-
Cl.5.1(General)	-	7000	-
Cl.6(Dimension)	-	7000	-
Cl.7(Finish)	-	7000	-
Cl.8.2(Cossosion Test)	-	7000	-
Cl.8.3(Quench Test)	-	7000	-
Cl.9(Sampling and criterion for conformity)	-	7000	-
Cl.10(Marking)	-	7000	-
Cl.11(Packing)	-	7000	-
Cl.8.3 (Amendment 1)(Anodizing Test)	-	7000	-

19 Jun, 2028

-
Included w.e.f 18.11.2025

IS 1019 (1974)

Specification for rim latches (Second Revision)

ALL GRADES

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1 table 1 -i(mild steel)	-	12000	-
5.1 table 1 -ii(galvenised mild steel wire ( for rivets ))	-	12000	-
5.1 table 1 -iii(cast brass)	-	12000	-
5.1 table 1 -iv(brass sheet)	-	12000	-
5.1 table 1 -v(Phosphor bronze wire)	-	12000	-
5.1 table 1 -vi(steel wire for spring)	-	12000	-
5.1 table 1 -vii(leaded tin bronze)	-	12000	-
5.1 table 1-viii(aluminium alloy pressure die casting)	-	12000	-
5.1 table 1 -ix(aluminium alloy sheets)	-	12000	-
5.1 table 1 -x(Cast brass)	-	12000	-
8.2.1(body)	-	12000	-
8.2.2(Back Plate)	-	12000	-
8.2.3(latch Bolt)	-	12000	-
8.2.4(Follower)	-	12000	-
8.2.5(spring)	-	12000	-
8.2.6(LockingPin -)	-	12000	-
8.2.7(Spindle)	-	12000	-
8.2.8(Knob)	-	12000	-
8.29(disc)	-	12000	-
8.2.10(striking box)	-	12000	-
9.2()	-	12000	-
2-2.1(HANDING OF RIM LATeRES)	-	12000	-
Cl. 10(PERFORMANCE REQUIREMENTS)	-	12000	-

19 Jun, 2028

-
Included w.e.f 18.11.2025

IS 4992 (2024)

Door Handles for Mortice Locks â Specification (Second Revision)

All Grades

18500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6.1(Fastening Elements and Spindle)	-	500	-
Cl-6.2, Table-2 (i) a(Axial strength percent)	-	4000	-
Cl-6.2, Table-2 (i) b(Pre-load)	-	4000	-
Cl-6.2, Table-2 (i) c(Permanent deformation)	-	4000	-
Cl-6.3(Safety Requirements)	-	500	-
Cl-6.4, Table-3 (1) a(Number of cycles)	-	5000	-
Cl-6.4, Table-3 (1) b(Force “P”)	-	5000	-
Cl-6.5(Corrosion Resistance)	-	4000	-
Cl-6.6(Fire Resistance Test)	-	4000	-
Cl-8(Marking)	-	500	-

19 Jun, 2028

-
Included w.e.f 18.11.2025

IS 17296 (2020)

Stainless Steel Door Stoppers ” Specification

ALL GRADES

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 3,a(Single rod door stoppers)	-	2000	-
Clause 3,b(Double rod door stoppers)	-	2000	-
Clause 3,c(Long square rod door stoppers)	-	2000	-
Clause 4.1.1(Base Plate)	-	2000	-
Clause 4.1.2(Rod)	-	2000	-
Clause 4.1.3(Rubber)	-	2000	-
Clause 5(Sizes)	-	2000	-
Clause 7(Finish)	-	2000	-
Clause 8(Sampling and criteria for conformity)	-	2000	-
Clause 9(Marking)	-	2000	-
Clause 10(Packing)	-	2000	-

19 Jun, 2028

-
Included w.e.f 18.11.2025

IS 12817 (2020)

Stainless Steel Butt Hinges - Specification ( Third Revision )

ALL TYPES

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2, Table 1 to 6(Length , A -IS 12817)	-	14000	-
6.2, Table 1 to 6(Breadth, B-IS 12817)	-	14000	-
6.2, Table 1 to 6(Breadth, B1-IS 12817)	-	14000	-
6.2, Table 1 to 6(Breadth, B2-IS 12817)	-	14000	-
6.2, Table 1 to 6(Thickness of flap, C-IS 12817)	-	14000	-
6.2, Table 1 to 6(Dia. of Hinge pin, D-IS 12817 )	-	14000	-
6.2, Table 1 to 6(Number of Knuckles- IS 12817 )	-	14000	-
6.2, Table 1 to 6(Number of Screw Holes -IS 12817 )	-	14000	-
6.2, Table 1 to 6(Holes for Screw Number- IS 12817 )	-	14000	-
7.1(General - IS 12817 )	-	14000	-
7.2(Knuckles - IS 12817 )	-	14000	-
7.3(Pins- IS 12817 )	-	14000	-
7.4(Screw Holes- IS 12817 )	-	14000	-
7.4.2(Position of screw holes - IS 12817 )	-	14000	-
7.4.2, Fig 1(The distance of the screw holes from the end of the flap - IS 12817 )	-	14000	-
8.0(Finish - IS 12817 )	-	14000	-
Clause 4.1.2(Silicon (Pin) )	-	14000	-
Clause 4.1.2(Phosphorus (Pin) )	-	14000	-
Clause 4.1.2(Sulphur (Pin) )	-	14000	-
Clause 4.1.2(Manganese (Pin) )	-	14000	-
Clause 4.1.2(Carbon (Pin) )	-	14000	-
Clause 4.1.1(Silicon (Flap) )	-	14000	-
Clause 4.1.1(Phosphorus (Flap) )	-	14000	-
Clause 4.1.1(Sulphur (Flap) )	-	14000	-
Clause 4.1.1(Manganese (Flap) )	-	14000	-
Clause 4.1.1(Carbon (Flap) )	-	14000	-
Clause 7.4.2 (Dimension - Z )	-	14000	-
Clause 7.4.2 (Dimension - Y )	-	14000	-
Clause 7.4.2 (Dimension - X )	-	14000	-
Clause 7.4.1(Number of holes)	-	14000	-
As per Cl.4(Carbon)	-	14000	-
As per Cl.4(Sulphur)	-	14000	-
As per Cl.4(Phosphorus)	-	14000	-
As per Cl.4(Manganese)	-	14000	-
As per Cl.4(Nitrogen)	-	14000	-
As per Cl.4(Silicon)	-	14000	-
As per Cl.4(Aluminium)	-	14000	-
As per Cl.4(Chromium)	-	14000	-
As per Cl.4(Vanadium)	-	14000	-
As per Cl.4(Molybdenum)	-	14000	-
As per Cl.4(Niobium)	-	14000	-
As per Cl.4(Nickel)	-	14000	-
As per Cl.4(Copper)	-	14000	-
As per Cl.4(Titanium)	-	14000	-
As per Cl.4(Zirconium)	-	14000	-
As per Cl.4(Tungsten)	-	14000	-
As per Cl.4(Cerium)	-	14000	-
Cl.4(Other Elements - IS 228 and its parts or any other intrumental/chemical methods)	-	14000	-

19 Jun, 2028

-
Included w.e.f. 29.10.2025

IS 362 (1991)

Parliament Hinges -specification

ALL TYPES

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.1 (Brass parliament hinges shall have either bright or satin finish and shall be suitably protected against discoloration)	-	12000	-
Cl. 7.2 (Ref. Cl. 11.1 of IS 1868:1996)( appearance and Colour - shall be free from visible defects on the significant surface(s) when viewed from an agreed distance)	-	12000	-
Cl. 7.2 (Ref. Cl.9 of IS 1868:1996)(Aluminium shall be anodized to a bright, natural, sat or satin finish or dyed. )	-	12000	-
Cl. 7.2 (Ref. Cl.9 of IS 1868:1996)(Anodinc casting thickness (Cl. 9.2 of IS 1868:1996))	-	12000	-
Cl. 7.3(Mild steel parliament hinges shall be finished bright or electro-galvanized as specified by the purchaser)	-	12000	-
3(Type)	-	12000	-
5.1-able 2(Dlmenslons for Aluminium Alloy Parliament Hinges-Size)	-	12000	-
5.1-able 2(Dlmenslons for Aluminium Alloy Parliament Hinges-A)	-	12000	-
5.1-able 2(Dlmenslons for Aluminium Alloy Parliament Hinges-B)	-	12000	-
5.1-able 2(Dlmenslons for Aluminium Alloy Parliament Hinges-C)	-	12000	-
5.1-able 2(Dlmenslons for Aluminium Alloy Parliament Hinges-D)	-	12000	-
5.1-able 2(Dlmenslons for Aluminium Alloy Parliament Hinges-d)	-	12000	-
5.1-able 2(Dlmenslons for Aluminium Alloy Parliament Hinges-E)	-	12000	-
5.1-able 2(Dlmenslons for Aluminium Alloy Parliament Hinges-Thickness of Flap)	-	12000	-
5.1-able 2(Dlmenslons for Aluminium Alloy Parliament Hinges-No. of Screw holes)	-	12000	-
5.1-able 2(Dlmenslons for Aluminium Alloy Parliament Hinges-Holes for screw designation)	-	12000	-
5.1-able 3(Dimensions for Cast Brass Parliament Hinges-Size)	-	12000	-
5.1-able 3(Dimensions for Cast Brass Parliament Hinges-A)	-	12000	-
5.1-able 3(Dimensions for Cast Brass Parliament Hinges-B)	-	12000	-
5.1-able 3(Dimensions for Cast Brass Parliament Hinges-C)	-	12000	-
5.1-able 3(Dimensions for Cast Brass Parliament Hinges-D)	-	12000	-
5.1-able 3(Dimensions for Cast Brass Parliament Hinges-d)	-	12000	-
5.1-able 3(Dimensions for Cast Brass Parliament Hinges-E)	-	12000	-
5.1-able 3(Dimensions for Cast Brass Parliament Hinges-Thickness of Flap)	-	12000	-
5.1-able 3(Dimensions for Cast Brass Parliament Hinges-No. of Screw holes)	-	12000	-
5.1-able 3(Dimensions for Cast Brass Parliament Hinges-Holes for screw designation)	-	12000	-
5.1-Table 4(Dimensions for Mild Steel Parliament Hinges-Size)	-	12000	-
5.1-Table 4(Dimensions for Mild Steel Parliament Hinges-A)	-	12000	-
5.1-Table 4(Dimensions for Mild Steel Parliament Hinges-B)	-	12000	-
5.1-Table 4(Dimensions for Mild Steel Parliament Hinges-C)	-	12000	-
5.1-Table 4(Dimensions for Mild Steel Parliament Hinges-D)	-	12000	-
5.1-Table 4(Dimensions for Mild Steel Parliament Hinges-d)	-	12000	-
5.1-Table 4(Dimensions for Mild Steel Parliament Hinges-E)	-	12000	-
5.1-Table 4(Dimensions for Mild Steel Parliament Hinges-Thickness of Flap)	-	12000	-
5.1-Table 4(Dimensions for Mild Steel Parliament Hinges-No. of Screw holes)	-	12000	-
5.1-Table 4(Dimensions for Mild Steel Parliament Hinges-Holes for screw designation)	-	12000	-
6.1(MANUFACTURE-General)	-	12000	-
6.1(MANUFACTURE-General)	-	12000	-
6.1(MANUFACTURE-General)	-	12000	-
6.2(MANUFACTURE-Knuckles)	-	12000	-
6.2(MANUFACTURE-Knuckles)	-	12000	-
6.2(MANUFACTURE-Knuckles)	-	12000	-
6.2(MANUFACTURE-Knuckles)	-	12000	-
6.3(MANUFACTURE-Pins)	-	12000	-
6.3(MANUFACTURE-Pins)	-	12000	-
6.3(MANUFACTURE-Pins)	-	12000	-
6.3(MANUFACTURE-Pins)	-	12000	-
6.4(MANUFACTURE-Screw Holes)	-	12000	-
6.5(MANUFACTURE-Position of Holes)	-	12000	-
6.5(MANUFACTURE-Position of Holes)	-	12000	-
6.5(MANUFACTURE-Position of Holes-minimum distance from the ends of the flap)	-	12000	-
6.5(MANUFACTURE-Position of Holes-minimum distance from the inner edge)	-	12000	-
6.5(MANUFACTURE-Position of Holes)	-	12000	-
7.1(FINISH)	-	12000	-
7.3(FINISH)	-	12000	-

19 Jun, 2028

-
Included w.e.f. 29.10.2025

IS 18297 (2023)

Cabinet Hinges

ALL TYPES

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Type & Size)	-	22000	-
4.1(Type (a) Full Overlay (Fig-1))	-	22000	-
4.2((b) Half Overlay (Fig-2))	-	22000	-
4.1((b) Half Overlay (Fig-2))	-	22000	-
4.1(c) Inset (Fig-2))	-	22000	-
4.2(Size (Fig-2))	-	22000	-
4.3(Manufacture & Purchaser)	-	22000	-
5(Material (IS 18297))	-	22000	-
6 Table 1(Manufacture(IS: 18297))	-	22000	-
7.1(General Test Requirement (IS: 18297))	-	22000	-
7.1.1(Preparatory Measures (IS:18297))	-	22000	-
7.1.2(Limiting Deviations (IS:18297))	-	22000	-
7.1.3(Application of Force (IS: 18297))	-	22000	-
7.1.4(Sequence of Testing (IS 18297))	-	22000	-
7.1.5.1(Mass (IS:18297))	-	22000	-
7.1.5.2((i) Face withdrawal of Screws (IS: 2380 P-14))	-	22000	-
7.1.5.2((ii) Density (IS 2380 P-3))	-	22000	-
7.2(Over Load Test (IS 18297))	-	22000	-
7.2.1(Overload Test - Vertical Static overload test)	-	22000	-
7.2.2(Overload Test - Horizontal Static overload test)	-	22000	-
Cabinet Hinges(Functional Test (IS: 18297))	-	22000	-
Cabinet Hinges(Functional Test (IS: 18297))	-	22000	-
7.3.2(First Vertical Static Load test (IS 18297))	-	22000	-
7.3.3(First Horizontal Static Load test (IS 18297))	-	22000	-
7.3.4(Slam shut test (IS 18297))	-	22000	-
7.3.6(Durability Test (IS 18297))	-	22000	-
7.3.7(Deflection Test (IS 18297))	-	22000	-
7.3.8(Second Vertical Static Test (IS 18297))	-	22000	-
7.3.9(Second Horizontal Static Test (IS: 18297))	-	22000	-
7.4(Crrosion Resistance (IS 18297))	-	22000	-
7.5(Finish (IS: 18297))	-	22000	-
7.3.1(Operating Forces)	-	22000	-
7.1.5.3(Standard door dimensions and masses)	-	22000	-
7.3.5(Determination of Reference Point for the Door Sagging)	-	22000	-

19 Jun, 2028

-
Included w.e.f. 29.10.2025

IS 3818 (1992)

Continuous (Piano) hinges -Specification

ALL GRADES

4100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6 (Ref. Cl.9 of IS 1868:1996)(Anodic casting thickness (Cl. 9.2 of IS 1868:1996))	-	4100	-
4-Fig 1(DIMENSIONS AND TOLERANCES-Nominal Size)	-	4100	-
4-Fig 1(DIMENSIONS AND TOLERANCES-B)	-	4100	-
4-Fig 1(DIMENSIONS AND TOLERANCES-C)	-	4100	-
4-Fig 1(DIMENSIONS AND TOLERANCES-D)	-	4100	-
4-Fig 1(DIMENSIONS AND TOLERANCES-T)	-	4100	-
4-Fig 1(DIMENSIONS AND TOLERANCES-CSK Screw No.)	-	4100	-
4-Fig 1(DIMENSIONS AND TOLERANCES-minimum distance of screw holes from the end of flap)	-	4100	-
4-Fig 1(DIMENSIONS AND TOLERANCES- Other Dimensions)	-	4100	-
4-Fig 2(DIMENSIONS AND TOLERANCES-CoNTINUOUS ( PIANO) HINGIS TYPB III; 50 min NOMINAL SID)	-	4100	-
4-Fig 3(DIMENSIONS AND TOLERANCES-B)	-	4100	-
4-Fig 3(DIMENSIONS AND TOLERANCES-B1)	-	4100	-
4-Fig 3(DIMENSIONS AND TOLERANCES-B2)	-	4100	-
4-Fig 3(DIMENSIONS AND TOLERANCES-C)	-	4100	-
4-Fig 3(DIMENSIONS AND TOLERANCES-D)	-	4100	-
4-Fig 3(DIMENSIONS AND TOLERANCES-T)	-	4100	-
4-Fig 3(DIMENSIONS AND TOLERANCES-CSK Screw No.)	-	4100	-
5.1(MANUFACTURE)	-	4100	-
5.2(MANUFACTURE-Knuekles)	-	4100	-
5.2(MANUFACTURE-Knuekles)	-	4100	-
5.3(MANUFACTURE-Pins)	-	4100	-
5.3(MANUFACTURE-Pins)	-	4100	-
5.3(MANUFACTURE-Pin-Anodized thickness)	-	4100	-
5.3(MANUFACTURE-Pins)	-	4100	-
5.4(MANUFACTURE-Screw Holes)	-	4100	-
6(Finish)	-	4100	-

19 Jun, 2028

-
Included w.e.f. 29.10.2025

IS 3843 (1995)

Steel back flap hinges -Specification

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5, 6, Table 1, Table 2(Dimensions)	-	1000	-
Clause 4 Table 3(i)(Flap)	-	1000	-
Clause 4 Table 3(ii)(Pin)	-	1000	-
Clause 5(Dimension and tolerance)	-	1000	-
Clause 8(Marking)	-	1000	-
Clause 9(Packing)	-	1000	-

19 Jun, 2028

-
Included w.e.f. 29.10.2025

IS 453 (1993)

Double Acting Spring Hinges -Specification

ALL GRADES

24500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(DIMENSIONS)	-	500	-
9(PERFORMANCE TESTS)	-	20000	-
Clause 4.1(Mild Steel Sheet)	-	2000	-
Clause 4.2(Mild Steel Wire)	-	2000	-
Clause 4.3(Cast Brass)	-	2000	-
Clause 4.4(Brass Sheets)	-	2000	-
Clause 4.5(Brass Rods)	-	2000	-
Clause 4.6(Steel Wire)	-	2000	-
Clause 4.7(Phosphor Bronze Wire)	-	2000	-
Clause 5(Sizes)	-	2000	-
Clause 6(Dimensions)	-	500	-
Clause 8(Finish)	-	2000	-
Clause 9(Performance Test)	-	20000	-
Clause 10(Marking)	-	500	-
Clause 11(Packing)	-	500	-
Cl-7.1(Mild Steel Hinges)	-	2000	-
Cl-7.1.1(Blank hinge shall be made from mild steel sheet)	-	2000	-
Cl-7.2(Brass Hinges)	-	2000	-
Cl-7.2.1(Blank hinges shall be made of cast brass)	-	2000	-
Clause-9.0(Performance Test)	-	20000	-

19 Jun, 2028

-
Included w.e.f. 29.10.2025

IS 3564 (1995)

Hydraulically Regulated Door Closers -Specification

ALL TYPES

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11(Marking)	-	9000	-
11(Marking)	-	9000	-
11(Marking)	-	9000	-
11(Marking)	-	9000	-
11(Marking)	-	9000	-
11(Marking)	-	9000	-
11(Marking)	-	9000	-
12(Packing)	-	9000	-
12(Packing)	-	9000	-
12(Packing)	-	9000	-
12(Packing)	-	9000	-
12(Packing)	-	9000	-
12(Packing)	-	9000	-
12(Packing)	-	9000	-
13(Accessories)	-	9000	-
13(Accessories)	-	9000	-
6(Nominal Sizes)	-	9000	-
6(Nominal Sizes)	-	9000	-
8(Essential Requirements)	-	9000	-
8(Essential Requirements)	-	9000	-
8(Essential Requirements)	-	9000	-
8(Essential Requirements)	-	9000	-
8(Essential Requirements)	-	9000	-
8(Essential Requirements)	-	9000	-
8(Essential Requirements)	-	9000	-
8(Essential Requirements)	-	9000	-
8(Essential Requirements)	-	9000	-
8(Essential Requirements)	-	9000	-
8(Essential Requirements)	-	9000	-
8(Essential Requirements)	-	9000	-
8(Essential Requirements)	-	9000	-
8(Essential Requirements)	-	9000	-
8(Essential Requirements)	-	9000	-
8(Essential Requirements)	-	9000	-
8(Essential Requirements)	-	9000	-
8(Essential Requirements)	-	9000	-
9(Finish)	-	9000	-
9(Finish)	-	9000	-
9(Finish)	-	9000	-
9(Finish)	-	9000	-
9(Finish)	-	9000	-
9(Finish)	-	9000	-
9(Finish)	-	9000	-
9(Finish)	-	9000	-
9(Finish)	-	9000	-
10Annex B(Test)	-	9000	-
B-1.2(a) Visual Inspection)	-	9000	-
B-1.3(b) Surface)	-	9000	-
B-1.3(b) Surface)	-	9000	-
B-1.4(c) Performance Requirements)	-	9000	-
B-1.4(c) Performance Requirements)	-	9000	-
B-1.4(c) Performance Requirements)	-	9000	-
B-1.4(c) Performance Requirements)	-	9000	-
B-1.5(d) Endurance Test)	-	9000	-
B-1.5(d) Endurance Test)	-	9000	-
B-1.5(d) Endurance Test)	-	9000	-
B-1.5(d) Endurance Test)	-	9000	-
B-1.5(d) Endurance Test)	-	9000	-
B-1.5(d) Endurance Test)	-	9000	-
Cl. 7 Table 2(Materials)	-	9000	-
Clause 7 (Table 2 - xvii)(Material for Top lid)	-	9000	-
Clause 7 (Table 2 - xvi)(Material for Pawl)	-	9000	-
Clause 7 (Table 2 - xv)(Material for Top nut)	-	9000	-
Clause 7 (Table 2 - xiv)(Material for Main arm bolt)	-	9000	-
Clause 7 (Table 2 - xiii)(Material for Internal bearing and gland )	-	9000	-
Clause 7 (Table 2 - xii)(Material for Material for Eccentric shaft )	-	9000	-
Clause 7 (Table 2 - xi)(Material for Concentric ratchet ( For bottle type ) )	-	9000	-
Clause 7 (Table 2 - x)(Material for Clamp)	-	9000	-
Clause 7 (Table 2 - ix)(Material for Main arm )	-	9000	-
Clause 7 (Table 2 - viii)(Material for Adjusting arm)	-	9000	-
Clause 7 (Table 2 - vii)(Material for All weather resistant homogeneous high viscosity hydraulic)	-	9000	-
Clause 7 (Table 2 - vi)(Material for Control valve screw)	-	9000	-
Clause 7 (Table 2 - v)(Material for Material for Packing/washers)	-	9000	-
Clause 7 (Table 2 - iv)(Material for Piston or Rack-piston/pinion)	-	9000	-
Clause 7 (Table 2 - iii)(Material for Nuts)	-	9000	-
Clause 7 (Table 2 - ii)(Material for Torsion spring helical spring)	-	9000	-

19 Jun, 2028

-
Included w.e.f. 29.10.2025

IS 14912 (2001)

Door closers, concealed type (Hydraulically Regulated) - Specification

All Types

17000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(NOMINAL SIZES)	-	500	-
6 table 2(material)	-	1000	-
7.2(CLOSING TIME)	-	1000	-
8.1(FINISH)	-	2500	-
8.2.2(FINISH)	-	2500	-
13.3.1 table 3(For Construction, Finish, Dimensions, Interchangeability of Parts and Performance Tests)	-	2500	-
13.3.2(Endurance Test)	-	12000	-
Clause 5(Nominal size)	-	500	-
Clause 6 Table 2(i)(Non-Porous body)	-	1000	-
Clause 6 Table 2(ii)(Piston)	-	1000	-
Clause 6 Table 2(iii)(End plug)	-	1000	-
Clause 6 Table 2(iv)(Main spring inner spring)	-	1000	-
Clause 6 Table 2(v)(Regulating valve packing)	-	1000	-
Clause 6 Table 2(vi)(Regulating valve)	-	1000	-
Clause 6 Table 2(vii)(All weather resistant homogenous high viscosity hydraulic fluid)	-	1000	-
Clause 6 Table 2(viii)(Top and bottom bearing bush)	-	1000	-
Clause 6 Table 2(ix)(Pinion)	-	1000	-
Clause 6 Table 2(x)(Top guide nut)	-	1000	-
Clause 6 Table 2(xi)(Shaft seal)	-	1000	-
Clause 6 Table 2(xii)(Seal retaining ring)	-	1000	-
Clause 6 Table 2(xiii)(Aluminium sheet cover )	-	1000	-
Clause 6 Table 2(xiv)(Holding plate)	-	1000	-
Clause 6 Table 2(xv)(Main arm)	-	1000	-
Clause 6 Table 2(xvi)(Nvlon runner)	-	1000	-
Clause 7(As per Table 1)	-	1000	-
Clause 8(Finish )	-	2500	-
Clause 9(Test )	-	12000	-
Clause 10(Marking)	-	1000	-
Clause 11(Packing)	-	1000	-

19 Jun, 2028

-
Included w.e.f. 29.10.2025

IS 6343 (1982)

Specification for Door Closers (Pneumatically Regulated) for Light Doors Weighing up to 40 kg

ALL

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Weight)	-	500	-
6.5(leakage in the air pressure.)	-	500	-
7.1(Angle)	-	500	-
7.2(Endurance test)	-	10000	-
8(Finish Test)	-	2000	-
Cl. 6.2(GENERAL REQUIREMENTS)	-	400	-
Cl. 6.3(GENERAL REQUIREMENTS)	-	400	-
Cl. 6.4(GENERAL REQUIREMENTS)	-	400	-
Cl. 6.6(GENERAL REQUIREMENTS)	-	300	-

19 Jun, 2028

-
Included w.e.f. 29.10.2025

IS 11329 (2018)

Finned type heat exchanger for room air conditioner (First Revision)

All

210000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(CLASSIFICATION AND NOMENCLATURE)	-	1000	-
5(MATERIALS)	-	2500	-
6(QUALITY REQUIREMENTS)	-	5000	-
7(TESTING)	-	200000	-
7.1("Permissible Assembly Contamination Specification")	-	50000	-
7.1.1(Internal Contamination)	-	50000	-
7.2(Pressure Test for Assembly Tightness)	-	50000	-
7.2.1(Water Leak Test)	-	50000	-
7.2.2(Helium Leak Test)	-	50000	-
7.2.3(Vacuum Leak Test Process)	-	50000	-
7.3(Test for Mechanical Strength)	-	50000	-
7.3.1(Burst Test)	-	50000	-
7.3.2(Fatigue Strength Test)	-	50000	-
7.4(Test for Corrosion Resistance)	-	50000	-
8(MARKING)	-	1500	-
9()	-	0	-
7.1.2(Moisture content)	-	50000	-
4.1.1(Fin Pack with Collar and Tube Type)	-	0	-
4.1.1.2(Copper inner groove/micro groove tube and aluminium fin)	-	0	-
4.1.1.4(Enhanced fin surfaces)	-	0	-
4.1.2(Micro Channel Aluminium Tube and Aluminium fin heat exchanger(MCHE))	-	0	-
5.1(Tube Material)	-	0	-
5.1 a(Copper Tube)	-	0	-
5.2 a(Fin Material)	-	0	-
5.2 b(Fin Material)	-	0	-
5.3 a(Tube Sheet /End Plate)	-	0	-
5.3 b(Tube Sheet /End Plate)	-	0	-
6.1(Workmanship)	-	0	-
6.2.1.1(Hairpin tube)	-	0	-
6.2.1.2(Fin forming)	-	0	-
6.2.1.3(Tube sheet/End plate)	-	0	-
6.2.1.4(Expanded fin tightness)	-	0	-
6.2.1.5(Brazing material selection)	-	0	-
6.2.1.6(Brazing joint)	-	0	-
6.2.3(Heat Exchanger Assembly)	-	0	-
7.2.2.1(Chamber test method)	-	0	-
7.4.5.2(Test requirement)	-	0	-
7.4.5.2 a(Test requirement)	-	0	-
8.1(Marking of Finned Type Heat Exchanger)	-	0	-
9.1(Type Test)	-	0	-
9.2(Routine Tests)	-	0	-

19 Jun, 2028

-
Included w.e.f. 29.10.2025

IS 12406 (2025)

Medium Density Fibre Boards of Wood and Other Lignocellulosic Materials for General Purpose - Specification ( Third Revision )

ALL

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 7(Finish --IS 2380 (Part 2), IS 2380 (Part 3) & Visual)	-	12000	-
As per Clause 8, Table 2(Length -IS 2380 (Part 2))	-	12000	-
As per Clause 8, Table 2(Width - IS 2380 (Part 2))	-	12000	-
As per Clause 8, Table 2(Thickness - IS 2380 (Part 2))	-	12000	-
As per Clause 8, Table 2(Squareness, Max. - IS 2380 (Part 2))	-	12000	-
As per Clause 8, Table 2(Edge straightness, Max.)	-	12000	-
As per Clause 9.1 Table 3(Density -IS 2380 (Part 3))	-	12000	-
As per Clause 9.1 Table 3(Variation from mean density, --IS 2380 (Part 3))	-	12000	-
As per Clause 9.1 Table 3(Moisture Content -IS 2380 (Part 3))	-	12000	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of rupture (MoR), Min.-IS 2380 (Part 4))	-	12000	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of elasticity (MoE), Min. -(IS 2380 (Part 4))	-	12000	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table7(Internal bond strength, Min. - IS 2380 (Part 5))	-	12000	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(24 h thickness swelling (due to general absorption) Max. - IS 2380 (Part 17))	-	12000	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Screw withdrawal strength (face) , Min. -IS 2380 (Part 4))	-	12000	-
As per Clause 9.1 Table 4, Table 5, table 6, Table 7(Screw withdrawal strength (edge) , Min. -IS 2380 (Part 4))	-	12000	-
As per Clause 9.1 , Table 5, Table 6, Table 7(Moisture Resistance : Option 1 : Cyclic test (1. )Internal bond strength Min. -IS 2380 (Part 5) see note 1)	-	12000	-
As per Clause 9.1 , Table 5, Table 6, Table 7(Moisture Resistance : Option 2 : Boil test (1.) Internal bond strength , Min.- IS 2380 (Part 5) see note 2)	-	12000	-
As per Clause 9.1 , Table 9(Formaldehyde content Fc, mg/100 g for oven dry board -IS 13745)	-	12000	-
As per Clause 9.1 , Table 9(Steady-state formaldehyde emission, Fc, mg/m3 (optional test))	-	12000	-
Cl-5.1(Wood and Any Other Lignocellulosic Material)	-	12000	-
Cl-5.2(Adhesive)	-	12000	-
Cl-5.3(Sizing Material)	-	12000	-
Cl-5.4(Preservative Treatment)	-	12000	-
Cl-6(MANUFACTURE)	-	12000	-

19 Jun, 2028

-
Included w.e.f. 29.10.2025

IS 12823 (2025)

Prelaminated Medium Density Particle Boards from Wood and other Lignocellulosic Material Specification (Second Revision)

ALL GRADES

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 5(Material - IS 3087)	-	22000	-
As per Clause 8 Table 2(Length -IS 2380 (Part 2))	-	22000	-
As per Clause 8 Table 2(Width - IS 2380 (Part 2))	-	22000	-
As per Clause 8 Table 2(Thickness - IS 2380 (Part 2))	-	22000	-
As per Clause 8 Table 2(Squareness, Max -IS 2380 (Part 2))	-	22000	-
As per Clause 8 Table 2(Edge Straighness, Max - IS 2380 (Part 2))	-	22000	-
As per Clause 9.1 Table 3(Density -IS 2380 (Part 3))	-	22000	-
As per Clause 9.1 Table 3(Variation from mean density, --IS 2380 (Part 3))	-	22000	-
As per Clause 9.1 Table 3(Moisture Content -IS 2380 (Part 3))	-	22000	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of rupture (MoR), Min.-IS 2380 (Part 4))	-	22000	-
As per Clause 9.1 Table 4, Table 6, Table 7(Modulus of elasticity (MoE), Min. -(IS 2380 (Part 4))	-	22000	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table7(Internal bond strength, Min. - IS 2380 (Part 5))	-	22000	-
As per Clause 9.1 Table 6, Table 7(24 h thickness swelling (due to general absorption) Max. - IS 2380 (Part 17))	-	22000	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Screw withdrawal strength (face) , Min. -IS 2380 (Part 4))	-	22000	-
As per Clause 9.1 Table 4, Table 5, table 6, Table 7(Screw withdrawal strength (edge) , Min. -IS 2380 (Part 4))	-	22000	-
As per Clause 9.1 , Table 6, Table 7(Moisture Resistance : Option 1 : Cyclic test (1. )Internal bond strength Min. -IS 2380 (Part 5) see note 1)	-	22000	-
As per Clause 9.1 , Table 6, Table 7(Moisture Resistance : Option 2 : Boil test (1.) Internal bond strength , Min.- IS 2380 (Part 5) see note 2)	-	22000	-
As per Clause 9.1 , Table 8(Abrasion resistance in number of revolutions Min. --Annex. B)	-	22000	-
As per Clause 9.1 , Table 8(Resiatnce to stream/water vapour - Annex. C)	-	22000	-
As per Clause 9.1 , Table 8(Resitance to crack -Annex. D)	-	22000	-
As per Clause 9.1 , Table 8(Resistance to cigarette burn -Annex. E)	-	22000	-
As per Clause 9.1 , Table 8(Resiatnce to stain - Annex. F)	-	22000	-
As per Clause 9.1 , Table 9(Formaldehyde content Fc, mg/100 g for oven dry board -IS 13745)	-	22000	-
As per Clause 9.1 , Table 9(Steady-state formaldehyde emission, Fc, mg/m3 (optional test))	-	22000	-

19 Jun, 2028

-
Included w.e.f. 29.10.2025

IS 14587 (2025)

Prelaminated Medium Density Fibre Boards of Wood and Other Lignocellulosic Materials - Specification ( Second Revision )

All Types

14400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 8 Table 2(Length -IS 2380 (Part 2))	-	200	-
As per Clause 8 Table 2(Width - IS 2380 (Part 2))	-	200	-
As per Clause 8 Table 2(Thickness - IS 2380 (Part 2))	-	200	-
As per Clause 8 Table 2(Squareness, Max -IS 2380 (Part 2))	-	200	-
As per Clause 8 Table 2(Edge Straighness, Max - IS 2380 (Part 2))	-	200	-
As per Clause 9.1 Table 3(Density -IS 2380 (Part 3))	-	500	-
As per Clause 9.1 Table 3(Variation from mean density, --IS 2380 (Part 3))	-	500	-
As per Clause 9.1 Table 3(Moisture Content -IS 2380 (Part 3))	-	1000	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of rupture (MoR), Min.-IS 2380 (Part 4))	-	3000	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of elasticity (MoE), Min. -(IS 2380 (Part 4))	-	3000	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table7(Internal bond strength, Min. - IS 2380 (Part 5))	-	1000	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(24 h thickness swelling (due to general absorption) Max. - IS 2380 (Part 17))	-	1000	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Screw withdrawal strength (face) , Min. -IS 2380 (Part 4))	-	1000	-
As per Clause 9.1 Table 4, Table 5, table 6, Table 7(Screw withdrawal strength (edge) , Min. -IS 2380 (Part 4))	-	1000	-
As per Clause 9.1 , Table 5, Table 6, Table 7(Moisture Resistance : Option 1 : Cyclic test (1. )Internal bond strength Min. -IS 2380 (Part 5) see note 1)	-	1000	-
As per Clause 9.1 , Table 5, Table 6, Table 7(Moisture Resistance : Option 2 : Boil test (1.) Internal bond strength , Min.- IS 2380 (Part 5) see note 2)	-	1000	-
As per Clause 9.1 , Table 8(Abrasion resistance in number of revolutions Min. --Annex. B)	-	1000	-
As per Clause 9.1 , Table 8(Resiatnce to stream/water vapour - Annex. C)	-	1000	-
As per Clause 9.1 , Table 8(Resitance to crack -Annex. D)	-	500	-
As per Clause 9.1 , Table 8(Resistance to cigarette burn -Annex. E)	-	200	-
As per Clause 9.1 , Table 8(Resiatnce to stain - Annex. F)	-	200	-
As per Clause 9.1 , Table 8(Resiatnce to stain - Annex. F)	-	200	-
As per Clause 9.1 , Table 9(Formaldehyde content Fc, mg/100 g for oven dry board -IS 13745)	-	2000	-
As per Clause 9.1 , Table 9(Steady-state formaldehyde emission, Fc, mg/m3 (optional test))	-	0	-

19 Jun, 2028

-
Included w.e.f. 29.10.2025

IS 3097 (2025)

Veneered Medium Density Particle Boards from Wood and other Lignocellulosic Material - Specification ( Third Revision )

ALL

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4.1 and Table 1(Classification based on surface characteristics)	-	500	-
Cl. 4.1 and Table 1(Grade)	-	500	-
Cl. 4.2(Formaldehyde Classes)	-	500	-
Cl. 8.1 and Table 2(i)(Dimensions and Tolerances(Length))	-	1000	-
Cl. 8.1 and Table 2(ii)(Dimensions and Tolerances(Width))	-	1000	-
Cl. 8.2 and Table 2(iii)(Dimensions and Tolerances(Thickness))	-	1000	-
Cl. 8.3 and Table 2(iv)(Squareness)	-	1000	-
Cl. 8.3 and Table 2(v)(Edge Straightness)	-	1000	-
Cl. 9.1 and Table 3(i)(Density)	-	3500	-
Cl. 9.1 and Table 3(ii)(Variation from mean density)	-	3500	-
Cl. 9.1 and Table 3(iii)(Moisture Content)	-	3500	-
Cl. 9.1 and Table 4(i)/5(i)/6(i)/7(i)(Modulus of Rupture(MoR))	-	5000	-
Cl. 9.1 and Table 4(ii)/6(ii)/7(ii)(Modulus of Elasticity(MoE))	-	5000	-
Cl. 9.1 and Table 4(iii)/5(ii)/6(iii)/7(iii)(Internal bond strength)	-	1000	-
Cl. 9.1 and Table 6(iv)/7(iv)(24 h thickness swelling(due to general water absorption))	-	1000	-
Cl. 9.1 and Table 4(iv)/5(iii)/6(v)/7(v)("Screw withdrawal strength (face)")	-	3000	-
Cl. 9.1 and Table 4(v)/5(iv)/6(vi)/7(vi)("Screw withdrawal strength (edge)")	-	3000	-
Cl. 9.1 and Table 6(vii)(a)/7(vii)(a)(Internal bond strength(after cyclic test))	-	3000	-
Cl. 9.1 and Table 6(vii)(b)/7(vii)(b)(Internal bond strength(boil test))	-	3000	-
Cl. 9.4 and Table 8(i)(Formaldehyde content)	-	5000	-
Cl. 9.4 and Table 8(ii)(Steady-state formaldehyde emmision (optional test))	-	0	-
Cl. 9.3.1(Adhesion of Plies)	-	3000	-

19 Jun, 2028

-
Included w.e.f. 29.10.2025

IS 5509 (2021)

Fire Retardant Plywood - Specification ( Third Revision )

all

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.3 (Table 1)(b) 6 mm and above)	-	9500	-
4.1(Flame retardant chemicals)	-	9500	-
4.2(Flame retardant and preservative treatment)	-	9500	-
4.3(Treatment)	-	9500	-
5(PREPARATION FOR TREATMENT)	-	9500	-
6.1.1(Treatment of Plywood by Pressure Impregnation after Manufacture)	-	9500	-
6.1.2(Soaking Treatment)	-	9500	-
6.2(Choice of Treatment)	-	9500	-
7(CONDITIONING AFTER TREATMENT)	-	9500	-
8.1(Dimensions)	-	9500	-
8.2(Thickness)	-	9500	-
8.3, Taable-1 (i)(Tolerance- Length)	-	9500	-
9(WORKMANSHIP AND FINISH)	-	9500	-
10(SAMPLING AND CRITERIA FOR CONFORMITY)	-	9500	-
11 (a)(For flammability)	-	9500	-
11 (b)(For flame penetration)	-	9500	-
11 (c)(For rate of burning)	-	9500	-
12.1 Table - 2 (i)(Moisture content, percent, Max)	-	9500	-
12.1 Table - 2 (ii)(Flammability (see Note 1), minutes, Min)	-	9500	-
12.1 Table - 2 (iii)(Flame penetration (see Note 2), minutes, Min)	-	9500	-
12.1 Table - 2 (iv)(Rate of burning (see Note 3), minutes, Min)	-	9500	-
12.2(Other Tests)	-	9500	-
14(Marking)	-	9500	-
Cl-13(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	9500	-
Cl-8.3, Table-1 (ii)(Tolerances-Width)	-	9500	-
Cl-8.3, Table-1 (iii)(Tolerances- Thickness)	-	9500	-
Cl-8.3, Table-1 (iv)(Edge straightness)	-	9500	-
Cl-8.3, Table-1 (v)(Squareness,)	-	9500	-

19 Jun, 2028

-
Included w.e.f. 29.10.2025

IS 17190 (2020)

Grouts for Filling of Joints of Tiles and Stones - Specification

24000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5-Table 1-(i)(Linear shrinkage, percent, Max)	-	2750	-
5-Table 1-(ii)(Water absorption after 30 min, percent, Max)	-	2750	-
5-Table 1-(iii)(Water absorption after 240 min, percent, Max (optional))	-	2750	-
5-Table 1-(iv)(Compressive strength, MPa, Min)	-	2750	-
5-Table 1-(v)(Flexural strength, MPa, Min)	-	2750	-
5-Table 1-(vi)(Abrasion resistance, percent, Max)	-	2750	-
5-Table 1-(vii)(Chemical resistance (optional))	-	2750	-
5-Table 1-(viii)(Transverse deformation, mm, Min)	-	2750	-
6(Packing)	-	1000	-
7(Marking)	-	1000	-

19 Jun, 2028

-
Included w.e.f. 29.10.2025

First
Prev
1
2
3
4
Next
Last

Bureau of Indian Standards

The National Standards Body of India

Atckon Laboratories LLP, Bahadurgarh

Plot NO. 45, Part A M.I.E, Bahadurgarh, Jhajjar, Haryana, Bahadurgarh, Jhajjar, Haryana, 124507

8570906101 info@atckonlabs.com

Scope List