BIS - LIMS (Laboratory Information Management System)

Atckon Laboratories LLP, Bahadurgarh

Plot NO. 45, Part A M.I.E, Bahadurgarh, Jhajjar, Haryana, Bahadurgarh, Jhajjar, Haryana, 124507

8570906101 info@atckonlabs.com

Scope List

Reset

101 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 1161 (2014)

Steel tubes for structural purposes - Specification (Fifth Revision)

ALL

7900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6(Outer Diameter, Thickness & Mass)	-	7900	-
Cl 7(Workmanship)	-	7900	-
Cl 8(Workmanship)	-	7900	-
Cl 9(Workmanship)	-	7900	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	7900	-
Cl 13(Workmanship)	-	7900	-
Cl 6(Outer Diameter, Thickness & Mass)	-	7900	-
Cl 7(Workmanship)	-	7900	-
Cl 8(Workmanship)	-	7900	-
Cl 9(Workmanship)	-	7900	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	7900	-
Cl 13(Workmanship)	-	7900	-
Cl 6(Outer Diameter, Thickness & Mass)	-	7900	-
Cl 7(Workmanship)	-	7900	-
Cl 8(Workmanship)	-	7900	-
Cl 9(Workmanship)	-	7900	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	7900	-
Cl 13(Workmanship)	-	7900	-
8 AND AS PER IS 4736(UNIFORMITY OF ZINC COATING)	-	7900	-
8 AND AS PER IS 4736(MASS OF ZINC COATING)	-	7900	-
5 AND AS PER IS 10748(COPPER)	-	7900	-
5 AND AS PER IS 10748(MICRO ALLOY)	-	7900	-
5 AND AS PER IS 10748(CARBON EQUIVALENT)	-	7900	-
5 AND AS PER IS 10748(CARBON)	-	7900	-
Clause - 5.1, Table-3( ALUMINIUM)	-	7900	-
Clause - 5.1, Table-3(SILICON)	-	7900	-
Clause - 5.1, Table-3(NITROGEN)	-	7900	-
Clause - 5.1, Table-3(MANGANESE)	-	7900	-
Clause - 5.1, Table-3(PHOSPHURS)	-	7900	-
Clause - 5.1, Table-3(SULPHUR)	-	7900	-
Clause - 5.1, Table-3( CARBON)	-	7900	-
9(Straightness)	-	7900	-
10(Lengths)	-	7900	-
Cl 11.3.1(Flattening test (over 50 mm NB))	-	7900	-
Cl 11.3.1(Cold bend test (upto & including 50 mm NB))	-	7900	-
Cl. 11.2 Table 2(Elongation)	-	7900	-
Cl. 11.2 Table 2(Yield strength)	-	7900	-
Cl. 6 , 6.2 Table 1(Square of radius of gyyration)	-	7900	-
Cl. 6 , 6.2 Table 1(Radius of gyration)	-	7900	-
Cl. 6 , 6.2 Table 1(Modulus of section)	-	7900	-
Cl. 6 , 6.2 Table 1(Moment of inertia)	-	7900	-
Cl. 6 , 6.2 Table 1(Surface internal)	-	7900	-
Cl. 6 , 6.2 Table 1(Surface external)	-	7900	-
Cl. 6 , 6.2 Table 1(Internal volume)	-	7900	-
Cl. 6 , 6.2 Table 1(Area of cross section)	-	7900	-
Cl. 6 , 6.2 Table 1(Weight)	-	7900	-
Cl. 6 , 6.2 Table 1(Thickness)	-	7900	-
Clause 11.2, Table -2(Elongation)	-	7900	-
Clause 11.2, Table -2(Yield Strength)	-	7900	-
Cl 13(Workmanship)	-	7900	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	7900	-
Cl 9(Workmanship)	-	7900	-
Cl 8(Workmanship)	-	7900	-
Cl 7(Workmanship)	-	7900	-
Cl 6(Outer Diameter, Thickness & Mass)	-	7900	-
Cl 6(Outer Diameter, Thickness & Mass)	-	7900	-
Cl 7(Workmanship)	-	7900	-
Cl 8(Workmanship)	-	7900	-
Cl 9(Workmanship)	-	7900	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	7900	-
Cl 13(Workmanship)	-	7900	-
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Outer Diameter - SOP MT-23)	-	7900	-
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Thickness - SOP MT-23)	-	7900	-
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Mass - SOP MT-23)	-	7900	-
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Area of Cross Section - SOP MT-23)	-	7900	-
8.0(Mass of Zinc coating - IS:6745)	-	7900	-
8.0(Freedom from defects - IS 4736)	-	7900	-
8.0(Uniformity of galvanized coating - IS 4736)	-	7900	-
8.0(Adhesion test-Pivoted Hammer Test - IS 4736)	-	7900	-
13.0(Oiling and Painting - Visual)	-	7900	-
12(Marking)	-	7900	-
CL 6("1.Outer dia (04) 2.Thickness (08)")	-	7900	-
CL 06(Minimum Outer dia (04))	-	7900	-
CL 06(Maximum Outer dia (04))	-	7900	-
CL 06(" Minimum Thickness (08)")	-	7900	-
CL 06(Maximum Thickness (08))	-	7900	-

19 Jun, 2028

-
Included w.e.f. 15.10.2025

IS 10748 (2004)

Hot - Rolled steel strip for welded tubes and pipes - Specification (Second Revision)

ALL

9400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8 & Table 3(UTM)	-	9400	-
Cl 9(Press)	-	9400	-
Cl 11(Workmanship)	-	9400	-
Cl 12 & 13(Length, Width & Thickness)	-	9400	-
Cl 8 & Table 3(UTM)	-	9400	-
Cl 9(Press)	-	9400	-
Cl 11(Workmanship)	-	9400	-
Cl 12 & 13(Length, Width & Thickness)	-	9400	-
Cl 8 & Table 3(UTM)	-	9400	-
Cl 9(Press)	-	9400	-
Cl 11(Workmanship)	-	9400	-
Cl 12 & 13(Length, Width & Thickness)	-	9400	-
7.1(Carbon %)	-	9400	-
7.1(Manganese %)	-	9400	-
7.1(Phosphorus %)	-	9400	-
7.1(Sulphur %)	-	9400	-
7.1(Silicon %)	-	9400	-
7.1( Copper %)	-	9400	-
7.1( Aluminium %)	-	9400	-
7.1( Nb)	-	9400	-
7.1(V)	-	9400	-
7.1( Ti)	-	9400	-
7.1(Cr)	-	9400	-
7.1(Mo)	-	9400	-
7.1(Ni)	-	9400	-
7.1( Nitrogen%)	-	9400	-
7.1(CE)	-	9400	-
7.1(Carbon %)	-	9400	-
7.1(Manganese %)	-	9400	-
7.1(Phosphorus %)	-	9400	-
7.1(Sulphur %)	-	9400	-
7.1(Silicon %)	-	9400	-
7.1( Copper %)	-	9400	-
7.1( Aluminium %)	-	9400	-
7.1( Nb)	-	9400	-
7.1(V)	-	9400	-
7.1( Ti)	-	9400	-
7.1(Cr)	-	9400	-
7.1(Mo)	-	9400	-
7.1(Ni)	-	9400	-
7.1( Nitrogen%)	-	9400	-
7.1(CE)	-	9400	-
7.1(Carbon %)	-	9400	-
7.1(Manganese %)	-	9400	-
7.1(Phosphorus %)	-	9400	-
7.1(Sulphur %)	-	9400	-
7.1(Silicon %)	-	9400	-
7.1( Copper %)	-	9400	-
7.1( Aluminium %)	-	9400	-
7.1( Nb)	-	9400	-
7.1(V)	-	9400	-
7.1( Ti)	-	9400	-
7.1(Cr)	-	9400	-
7.1(Mo)	-	9400	-
7.1(Ni)	-	9400	-
7.1( Nitrogen%)	-	9400	-
7.1(CE)	-	9400	-
Table 1 ( Clauses 7.1 ,7.2 )(TITANIUM)	-	9400	-
Table 1 ( Clauses 7.1 ,7.2 )(VANADIUM)	-	9400	-
Table 1 ( Clauses 7.1 ,7.2 )(NIOBIUM)	-	9400	-
Table 1 ( Clauses 7.1 ,7.2 )(CARBON EQUIVELENT )	-	9400	-
Table 1 ( Clauses 7.1 ,7.2 )(Molybdenum)	-	9400	-
Table 1 ( Clauses 7.1 ,7.2 )(Chromium)	-	9400	-
Table 1 ( Clauses 7.1 ,7.2 )(Nickel)	-	9400	-
Table 1 ( Clauses 7.1 ,7.2 )( ALUMINIUM)	-	9400	-
Table 1 ( Clauses 7.1 ,7.2 )(SILICON)	-	9400	-
Table 1 ( Clauses 7.1 ,7.2 )(NITROGEN)	-	9400	-
Table 1 ( Clauses 7.1 ,7.2 )(MANGANESE)	-	9400	-
Table 1 ( Clauses 7.1 ,7.2 )(PHOSPHURS)	-	9400	-
Table 1 ( Clauses 7.1 ,7.2 )(SULPHUR)	-	9400	-
Table 1 ( Clauses 7.1 ,7.2 )( CARBON)	-	9400	-
Cl. 14(Weight)	-	9400	-
Cl. 12, 13(Camber)	-	9400	-
Cl. 12, 13(Thickness)	-	9400	-
Cl. 8, Table 3(Elongation)	-	9400	-
Cl. 8, Table 3(Yield Stress)	-	9400	-
Cl 12 & 13(Length, Width & Thickness)	-	9400	-
Cl 11(Workmanship)	-	9400	-
Cl 9(Press)	-	9400	-
Cl 8 & Table 3(UTM)	-	9400	-
Cl 8 & Table 3(UTM)	-	9400	-
Cl 9(Press)	-	9400	-
Cl 11(Workmanship)	-	9400	-
Cl 12 & 13(Length, Width & Thickness)	-	9400	-
7.0 (7)(Micro Alloying elements - IS:8811)	-	9400	-
8.0 (1)(Tensile Strength-IS:1608(P1))	-	9400	-
8.0 (2)(Yield Strength-IS:1608(P1))	-	9400	-
8.0 (3)(Elongation on 5.65 SoA GL-IS:1608(P1))	-	9400	-
12 (1)(Width - SOP MT-23)	-	9400	-
12 (2)(Thickness- SOP MT-23)	-	9400	-
12 (3)(Mass of Strip- SOP MT-23)	-	9400	-
15.0 & 15.1(Coil edges - IS:10748)	-	9400	-
15.0 & 15.2(Surface finish - IS:10748)	-	9400	-
15.0 & 15.5(Telescopicity - IS:10748)	-	9400	-
15(Condition of Coil)	-	9400	-
16(Marking)	-	9400	-
3.4(Vehicle Fuel System)	-	9400	-
9(Protective Treatment)	-	9400	-
Table 1 ( Clauses 7.1 ,7.2 )(Tungsten (W))	-	9400	-
Table 1 ( Clauses 7.1 ,7.2 )(Boron (B))	-	9400	-
CL 12(Average Width (04))	-	9400	-
CL 12(Average Thickness (08))	-	9400	-

19 Jun, 2028

-
Included w.e.f. 15.10.2025

IS 15997 (2012)

Low nickel austenitic stainless steel sheet and strip for utensils and kitchen appliances - Specification

ALL

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 8.1, 8.1.1 & 10.1 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Copper -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
6(Freedom From Defects)	-	5000	-
9.3(Tensile Test-1608:Part 1)	-	5000	-
9.3, Table 3 (Yield Strength, Mpa)	-	5000	-
9.3, Table 3 (Tensile Strength, Mpa)	-	5000	-
9.3, Table 3 (Elongation, %)	-	5000	-
9.4(Erichsen Cupping Test,(Average depth of cupping) mm)	-	5000	-
11(Surface finish)	-	5000	-
12(Dimensions)	-	5000	-
14.1(Thickness,mm)	-	5000	-
14.2( Width, mm)	-	5000	-
14.3(Length, mm)	-	5000	-
14.4(Flatness, mm)	-	5000	-
14.5(Camber, mm)	-	5000	-
Clause 9.1, 9.2 & Table 3(IS 1608 Part 1)	-	5000	-
17(Marking)	-	5000	-
Clause 9.1, 9.2 & Table 3(0.2 Percent Yield Strength)	-	5000	-
4.1(General requirements)	-	5000	-
6(Freedom from defects)	-	5000	-
7(Heat treatment)	-	5000	-
8.1, table 1(C Si Mn Ni Cr S P Cu Ni)	-	5000	-
8.1.1, table 2(Carbon Silicon Manganese Nickel Chromium Sulphur Phosphorus Copper Nitrogen)	-	5000	-
9.1(Sample plan)	-	5000	-
9.2(Tensile test)	-	5000	-
9.3(Mechanical properties)	-	5000	-
9.4(Erichsen cupping test)	-	5000	-
10(Retests)	-	5000	-
11(Surface finish)	-	5000	-
12(Dimensions)	-	5000	-
13(Edge condition)	-	5000	-
14.1(Thickness)	-	5000	-
14.2.1(Mill Edge)	-	5000	-
14.2.2(Trimmed Edge)	-	5000	-
14.3(Length)	-	5000	-
14.4(Flatness)	-	5000	-
14.5(Camber)	-	5000	-
15(Inspection)	-	5000	-
17(Marking)	-	5000	-

19 Jun, 2028

-
Included w.e.f. 09.10.2025

IS 14650 (2023)

UNALLOYED AND ALLOYED STEEL INGOT AND SEMI-FINISHED PRODUCTS FOR RE-ROLLING PURPOSES - SPECIFICATION (First Revision)

ALL

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause - 7.1(CARBON)	-	6000	-
Clause - 7.1(SULPHUR)	-	6000	-
Clause - 7.1(PHOSPHURS)	-	6000	-
Clause - 7.1(MANGANESE)	-	6000	-
Clause - 7.1(NITROGEN)	-	6000	-
As per Clause 10(Dimension)	-	6000	-
As per Clause 10.1(Dimension Width)	-	6000	-
As per Clause 10.1(Dimension Thickness)	-	6000	-
As per Clause 10.2(Dimension Length)	-	6000	-
As per Clause 11/11.1/11.2/11.3/11.4(Tolerances)	-	6000	-
As per Clause 11.5(Bend)	-	6000	-
As per Clause 11.6(Camber)	-	6000	-
As per Clause 11.7 (i)(Out of Square)	-	6000	-
As per Clause 11.7 (ii)(Round Corners)	-	6000	-
As per Clause 11.7 (iii)(Ridges due to gas cutting)	-	6000	-
As per Clause 11.7 (iv)(Taper (Width variation on top and bottom surface at one location)	-	6000	-
As per Clause 11.7 (v)(Edge slanting (Width variation on top and bottom surface at one location)	-	6000	-
As per Clause 11.7 (vi)(Convexity(Difference in thickness from edge to curve)	-	6000	-
As per Clause 11.7 (vii)(Chamfering (Length variation on top and bottom surface at one location)	-	6000	-
As per Clause 11.7 (viii)(Wedge (Thickness variation at the edges along the cross section)	-	6000	-
As per Clause 11.7 (ix)(Scarfing pits)	-	6000	-
As per Clause 12/12.1/12.2/12.3(Freedom from defects)	-	6000	-
Clause. 13(Macro examination test.)	-	6000	-
Clause. 13(Macro examination test.)	-	6000	-
Clause. 13(Sulphur print.)	-	6000	-
Clause. 13(Inclusion content)	-	6000	-
Clause. 14(Marking)	-	6000	-
Clause.15(Ordering information)	-	6000	-
Clause.6.0(Manufacture)	-	6000	-
Clause.7.1(Silicon)	-	6000	-
Clause.7.1(Carbon Equbalant)	-	6000	-
Clause.7.1(Microalloy element)	-	6000	-

19 Jun, 2028

-
Included w.e.f. 09.10.2025

IS 210 (2009)

Grey iron castings - Specification (First Revision)

ALL TYPES

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-	4000	-
7.1(WORKMANSHIP AND FINISH)	-	4000	-
10.1(FREEDOM FROM DEFECTS)	-	4000	-
10.2(FREEDOM FROM DEFECTS)	-	4000	-
13(SIZE OF TEST BARS-Diameter)	-	4000	-
13(SIZE OF TEST BARS-Length)	-	4000	-
15, Table 3(TENSIL.E TEST- IS 1608 Part1 )	-	4000	-
16, Table 3(Hardness Test)	-	4000	-
17,Annex B(TRANSVERSE TEST)	-	4000	-
18(HYDROSTATIC TEST)	-	4000	-
6(Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-	4000	-
7.1(WORKMANSHIP AND FINISH)	-	4000	-
10.1(FREEDOM FROM DEFECTS)	-	4000	-
10.2(FREEDOM FROM DEFECTS)	-	4000	-
13(SIZE OF TEST BARS-Diameter)	-	4000	-
13(SIZE OF TEST BARS-Length)	-	4000	-
15, Table 3(TENSIL.E TEST- IS 1608 Part1 )	-	4000	-
16, Table 3(Hardness Test)	-	4000	-
17,Annex B(TRANSVERSE TEST)	-	4000	-
18(HYDROSTATIC TEST)	-	4000	-
9(IS 7754)	-	4000	-
9(IS 7754)	-	4000	-
9(Microstructure)	-	4000	-
21(Marking)	-	4000	-
9(Microstructure)	-	4000	-
7.2(Casting dimensions)	-	4000	-
Cl-6(Phosprorus (P) - IS 12308 ( P-5))	-	4000	-

19 Jun, 2028

-
Included w.e.f. 09.10.2025

IS 4923 (2017)

Hollow steel sections for structural use - Specification (Third Revision)

ALL TYPES

6900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.7.1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6900	-
Cl.7.1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6900	-
Cl.7.1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6900	-
Cl.7.1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6900	-
Cl.7.1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6900	-
Cl.7.1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6900	-
Cl.7.1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6900	-
Cl.7.1(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6900	-
Cl.7.1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6900	-
Cl.7.1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6900	-
Cl.7.1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6900	-
Cl.7.1(Carbon Equivalent-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6900	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Depth))	-	6900	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Width))	-	6900	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Thickness))	-	6900	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Weigth))	-	6900	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Area of Section))	-	6900	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia))	-	6900	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about X-X))	-	6900	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about Y-Y))	-	6900	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration))	-	6900	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration about X-X))	-	6900	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Radius of Gyration about Y-Y))	-	6900	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Elastic Modulus))	-	6900	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about X-X))	-	6900	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about Y-Y))	-	6900	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus))	-	6900	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus about X-X))	-	6900	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Plastic Modulus about Y-Y))	-	6900	-
Cl. 10.1, 14.1, 18.1(Straightness)	-	6900	-
Cl. 10.2, Fig 1(Outside dimension (B))	-	6900	-
Cl. 10.2, Fig 1(Outside dimension (H))	-	6900	-
Cl. 10.2, Fig 1(Outside dimension (T))	-	6900	-
Cl. 10.4, Fig 2(Concavity, X1)	-	6900	-
Cl. 10.4, Fig 2(Convexity, X2)	-	6900	-
Cl. 10.5, Fig 3(Squareness of side)	-	6900	-
Cl. 10.6, Fig 4(External Corner Radius)	-	6900	-
Cl. 10.7, Fig 5(Total twist, V)	-	6900	-
Cl. 15.2, Table 3(Tensile Strength- IS 1608)	-	6900	-
Cl. 15.2, Table 3(Yield Strength- IS 1608)	-	6900	-
Cl. 15.2, Table 3(Elongation- IS 1608)	-	6900	-
Cl. 14.1(Exact Length)	-	6900	-
Cl. 14.1(Random Length)	-	6900	-
Cl. 14.1(Weight on individual length)	-	6900	-
Cl. 14.1(Weight on lots of 10 tonnes min)	-	6900	-
Cl. 18, Note 2(Internal Fin Height (Only for Cold Formed))	-	6900	-
7(Micro Alloying elements(Nb+V+Ti))	-	6900	-
7(Carbon equivalent as CE)	-	6900	-
10.4(Concavity/Convexity-SOP MT-23)	-	6900	-
10.5(Squareness of corner/Sides-SOP MT-23)	-	6900	-
10.6("External corner Radius/ Radii of corners-outside - SOP MT-23")	-	6900	-
11(Oiling & Painting - IS 4923)	-	6900	-
18.1(Height of the internal weld fin - IS 4923)	-	6900	-
10.3(Thickness - IS 4923)	-	6900	-
13(Marking)	-	6900	-
Cl-19(Mechanical Tests)	-	6900	-

19 Jun, 2028

-
Included w.e.f. 09.10.2025

IS 15911 (2010)

Structural steel (Ordinary Quality) - Specification

All Grades

7400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table-1, 5.1, 8.1 & 8.2(Carbon: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	7400	-
Table-1, 5.1, 8.1 & 8.2(Sulphur: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	7400	-
Table-1, 5.1, 8.1 & 8.2(Phosphorous: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	7400	-
Table-1, 5.1, 8.1 & 8.2(Manganese: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	7400	-
Table-1, 5.1, 8.1 & 8.2(Silicon: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	7400	-
Table-1, 5.1, 8.1 & 8.2(Chromium: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	7400	-
Table-1, 5.1, 8.1 & 8.2(Molybdenum: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	7400	-
Table-1, 5.1, 8.1 & 8.2(Vanadium: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	7400	-
Table-1, 5.1, 8.1 & 8.2(Nickel: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	7400	-
Table-1, 5.1, 8.1 & 8.2(Copper: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	7400	-
Table-1, 5.1, 8.1 & 8.2(Aluminium: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	7400	-
Table-1, 5.1, 8.1 & 8.2(Nitrogen: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	7400	-
Table-1, 5.1, 8.1 & 8.2(Niobium: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	7400	-
Table-1, 5.1, 8.1 & 8.2(Titanium: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	7400	-
Table-1, 5.1, 8.1 & 8.2(Boron: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	7400	-
7(Freedom from defects)	-	7400	-
5 and 10.3.1(Tensile strength. IS 1608)	-	7400	-
5 and 10.3.1(Yield Stress. IS 1608)	-	7400	-
5 and 10.3.1(Percentage Elongation. . IS 1608)	-	7400	-
5 and 10.3.1(Internal Bend Diameter)	-	7400	-
11.3( Bend Test. IS 1599)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(Mass. IS 808)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(Sectional Area. IS 808)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(D)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(B)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(t)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(T)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(Flange Slop, Max α , )	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(R1)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(R2)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(Ix)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(Iy)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(rx)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(ry)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(Zx)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(Zy)	-	7400	-
Cl 12 of IS 15911 and Table 2.2 of IS 808(Mass. IS 808)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(Sectional Area. IS 808)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(D)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(B)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(t)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(T)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(Flange Slop, Max α , )	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(R1)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(R2)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(Ix)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(Iy)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(rx)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(ry)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(Zx)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(Zy)	-	7400	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(Mass. IS 808)	-	7400	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(Sectional Area. IS 808)	-	7400	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(D)	-	7400	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(B)	-	7400	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(t)	-	7400	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(T)	-	7400	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(Flange Slop, Max α , )	-	7400	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(R1)	-	7400	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(R2)	-	7400	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(Ix)	-	7400	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(Iy)	-	7400	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(rx)	-	7400	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(ry)	-	7400	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(Zx)	-	7400	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(Zy)	-	7400	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(Mass. IS 808)	-	7400	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(Sectional Area. IS 808)	-	7400	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(D)	-	7400	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(B)	-	7400	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(t)	-	7400	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(T)	-	7400	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(Flange Slop, Max α , )	-	7400	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(R1)	-	7400	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(R2)	-	7400	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(Cy)	-	7400	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(Ix)	-	7400	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(Iy)	-	7400	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(rx)	-	7400	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(ry)	-	7400	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(Zx)	-	7400	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(Zy)	-	7400	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(Mass. IS 808)	-	7400	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(Sectional Area. IS 808)	-	7400	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(A*B)	-	7400	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(R1)	-	7400	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(R2)	-	7400	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(Cx)	-	7400	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(Cy)	-	7400	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(Ix)	-	7400	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(Iy)	-	7400	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(Ia( Max ))	-	7400	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(Iv( Max ))	-	7400	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(rx)	-	7400	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(ry)	-	7400	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(ru( Max ))	-	7400	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(rv( Min ))	-	7400	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(Zx)	-	7400	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(Zy )	-	7400	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(Mass. IS 808)	-	7400	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(Sectional Area. IS 808)	-	7400	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(A*B)	-	7400	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(R1)	-	7400	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(R2)	-	7400	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(Cx)	-	7400	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(Cy)	-	7400	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(Tanα)	-	7400	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(Ix)	-	7400	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(Iy)	-	7400	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(Ia( Max ))	-	7400	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(Iv( Max ))	-	7400	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(rx)	-	7400	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(ry)	-	7400	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(ru( Max ))	-	7400	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(rv( Min ))	-	7400	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(Zx)	-	7400	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(Zy )	-	7400	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(Mass. IS 808)	-	7400	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(Sectional Area. IS 808)	-	7400	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(A*B)	-	7400	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(R1)	-	7400	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(R2)	-	7400	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(Cx)	-	7400	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(Cy)	-	7400	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(Tanα)	-	7400	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(Ix)	-	7400	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(Iy)	-	7400	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(Ia( Max ))	-	7400	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(Iv( Max ))	-	7400	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(rx)	-	7400	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(ry)	-	7400	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(ru( Max ))	-	7400	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(rv( Min ))	-	7400	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(Zx)	-	7400	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(Zy )	-	7400	-
Cl 12 of IS 15911 and Table 1 of IS 1173(Clauses 3.1 , 5.1 and Table 1 of IS 1173)	-	7400	-
Cl 12 of IS 15911 and Table 1 of IS 1252(Clauses 4.1 , 6.1 and Table 1 of IS 1252)	-	7400	-
Cl 12 of IS 15911 and Table 2 of IS 1730(Clauses 4.1 , 4.2 and Table 1 of IS 1730)	-	7400	-
Cl 12 of IS 15911 and Table 2 of IS 1730(Clauses 4.2 and Table 1 of IS 1730)	-	7400	-
Cl 12 of IS 15911 and Table 3 of IS 1730(Clauses 4.3 and Table 1 of IS 1730)	-	7400	-
Cl 12 of IS 15911 and Table 4 of IS 1730(Clauses 5.1 and Table 1 of IS 1730)	-	7400	-
Cl 12 of IS 15911 and Table 5 of IS 1730(Clauses 5.2 and Table 1 of IS 1730)	-	7400	-
Cl 12 of IS 15911 and Table 6 of IS 1730(Clauses 6.1 and Table 1 of IS 1730)	-	7400	-
Cl 12 of IS 15911 and Table 7 of IS 1730(Clauses 6.2 and Table 1 of IS 1730)	-	7400	-
Cl 12 of IS 15911 and Table 8 of IS 1730(Clauses 7.1, 7.2 and Table 1 of IS 1730)	-	7400	-
Cl 12 of IS 15911 and Table 9 of IS 1730(Clauses 7.2 and Table 1 of IS 1730)	-	7400	-
Cl 12 of IS 15911 and Table 1 of IS 1732(Clauses 3.1, 4.1,4.1.1 and Table 1 of IS 1732)	-	7400	-
Cl 12 of IS 15911 and Table 2 of IS 1732(Clauses 3.1, 4.1,4.1.1 and Table 1 of IS 1732)	-	7400	-
Cl 12 of IS 15911 and Table 1 of IS 1863(Clauses 4.1, 5.5 and Table 1 of IS 1863)	-	7400	-
Cl 12 of IS 15911 and Table 2 of IS 1863(Clauses 5.1 and Table 2 of IS 1863)	-	7400	-
Cl 12 of IS 15911 and Table 3 of IS 1863(Clauses 5.2 and Table 2 of IS 1863)	-	7400	-
Cl 12 of IS 15911 and Table 1 of IS 3954(Clauses 4, 6.1 and Table 2 of IS 3954)	-	7400	-
13(Tolerances)	-	7400	-
17(Marking)	-	7400	-

19 Jun, 2028

-
Included w.e.f. 09.10.2025

IS 1341 (2018)

Steel Butt Hinges - Specification (Sixth Revision)

ALL TYPES

6400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3 Tables 2 to 9(Types)	-	6400	-
5.1 Tables 2 to 9 (2)(Size of Hinge)	-	6400	-
5.1 Tables 2 to 9 (3)(Length A)	-	6400	-
5.1 Tables 2 to 9 (4)(Breadth B)	-	6400	-
5.1 Tables 2 to 9 (4)(Breadth B1)	-	6400	-
5.1 Tables 2 to 9 (4)(Breadth B2)	-	6400	-
5.1 Tables 2 to 9 (5)(Thickness of Flap C)	-	6400	-
5.1 Tables 2 to 9 (6)(Diameter of Hinge Pin D)	-	6400	-
5.1 Tables 2 to 9 (7)(Number of Knuckles)	-	6400	-
5.1 Tables 2 to 9 (8)(Number of Screw Holes)	-	6400	-
5.1 Tables 2 to 9 (9)(Holes for Screw No.)	-	6400	-
6.1(General)	-	6400	-
6.1(General)	-	6400	-
6.1(General)	-	6400	-
6.2.1(Knuckles)	-	6400	-
6.3(Pins)	-	6400	-
6.4(Screw Holes)	-	6400	-
6.4.2(Position of Holes)	-	6400	-
6.4.2(X)	-	6400	-
6.4.2(Y)	-	6400	-
6.4.2(Z)	-	6400	-
6.4.2.1(Position of Holes)	-	6400	-
7(Finish)	-	6400	-
TABLE-1 (Clause-4)(TITANIUM)	-	6400	-
TABLE-1 (Clause-4)(VANADIUM)	-	6400	-
TABLE-1 (Clause-4)(NIOBIUM)	-	6400	-
TABLE-1 (Clause-4)(Molybdenum)	-	6400	-
TABLE-1 (Clause-4)(Chromium)	-	6400	-
TABLE-1 (Clause-4)(Nickel)	-	6400	-
TABLE-1 (Clause-4)( ALUMINIUM)	-	6400	-
TABLE-1 (Clause-4)(SILICON)	-	6400	-
TABLE-1 (Clause-4)(NITROGEN)	-	6400	-
TABLE-1 (Clause-4)(MANGANESE)	-	6400	-
TABLE-1 (Clause-4)(PHOSPHURS)	-	6400	-
TABLE-1 (Clause-4)(SULPHUR)	-	6400	-
TABLE-1 (Clause-4)( CARBON)	-	6400	-
Clause 4 Table 1(Manganese ( Pin))	-	6400	-
Clause 4 Table 1(Phosphorus ( Pin))	-	6400	-
Clause 4 Table 1(Sulphur ( Pin))	-	6400	-
Clause 4 Table 1(Carbon ( Pin))	-	6400	-
Clause 4 Table 1(Nitrogen ( Flap))	-	6400	-
Clause 4 Table 1(Manganese ( Flap))	-	6400	-
Clause 4 Table 1(Phosphorus ( Flap))	-	6400	-
Clause 4 Table 1(Sulphur ( Flap))	-	6400	-
Clause 4 Table 1(Carbon ( Flap))	-	6400	-
8(Marking)	-	6400	-
Cl 4 & Table 1(Sulphur- IS 228(Part 9))	-	6400	-
Cl 4 & Table 1(Carbon- IS 228(Part 1))	-	6400	-
Cl 4 & Table 1(Phosphorous- IS 228(Part 3))	-	6400	-
Cl 4 & Table 1(Manganese- IS 228(Part 2))	-	6400	-
Cl 4 & Table 1(Silicon- IS 228(Part 2))	-	6400	-
Cl 4 & Table 1(Nitrogen -IS 228(Part 19))	-	6400	-

19 Jun, 2028

-
Included w.e.f. 09.10.2025

IS 2062 (2011)

Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)

ALL GRADES

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 18(Weight)	-	15000	-
Cl 15(Length, Width & Thickness)	-	15000	-
Cl 13(Y Groove Cracking Test)	-	15000	-
Cl 12(Sudden Load Applied)	-	15000	-
Cl 11.3(Press)	-	15000	-
Cl 10.3(UTM)	-	15000	-
Cl 7(Workmanship)	-	15000	-
Cl 18(Weight)	-	15000	-
Cl 15(Length, Width & Thickness)	-	15000	-
Cl 13(Y Groove Cracking Test)	-	15000	-
Cl 12(Sudden Load Applied)	-	15000	-
Cl 11.3(Press)	-	15000	-
Cl 10.3(UTM)	-	15000	-
Cl 7(Workmanship)	-	15000	-
Cl 18(Weight)	-	15000	-
Cl 15(Length, Width & Thickness)	-	15000	-
Cl 13(Y Groove Cracking Test)	-	15000	-
Cl 12(Sudden Load Applied)	-	15000	-
Cl 11.3(Press)	-	15000	-
Cl 10.3(UTM)	-	15000	-
Cl 7(Workmanship)	-	15000	-
Clause - 5, 8.1 & 8.2(E650, CARBON +EQUIVELENT )	-	15000	-
Cl. 15 (Cl. 15 Channel Section: Sweep)	-	15000	-
Cl. 15(Cl. 15 Channel Section: Camber)	-	15000	-
Cl. 15(Cl. 15 Channel Section: Flatness of Web (Concavity))	-	15000	-
Cl. 15(Cl. 15 Channel Section: Flatness of Web (Convexity))	-	15000	-
Cl. 15(Cl. 15 Channel Section: Flange Out of Square)	-	15000	-
Cl. 15(Cl. 15 Channel Section: Width of Flange)	-	15000	-
Cl. 15(Cl. 15 Channel Section: Depth)	-	15000	-
Cl. 15(Cl. 15 Square Bar: Out of Square)	-	15000	-
Cl. 15(Cl. 15 Square Bar: Side Width: Minimum)	-	15000	-
Cl. 15(Cl. 15 Square Bar: Side Width: Maximum)	-	15000	-
Cl. 15(Cl. 15 Round Bar: Out of Shape)	-	15000	-
Cl. 15(Cl. 15 Round Bar: Diameter Minimum)	-	15000	-
Cl. 15(Cl. 15 Round Bar: Diameter Maximum)	-	15000	-
Cl. 10.3 (Cl. 10.3 (Elongation %))	-	15000	-
Cl. 10.3 (Cl. 10.3 (Yield Stress))	-	15000	-
Cl. 10.3 (Cl. 10.3 (Tensile Strength))	-	15000	-
Clause - 5, 8.1 & 8.2(E650, ALUMINIUM)	-	15000	-
Clause - 5, 8.1 & 8.2(E650, SILICON)	-	15000	-
Clause - 5, 8.1 & 8.2(E650, NITROGEN)	-	15000	-
Clause - 5, 8.1 & 8.2(E650 ,MANGANESE)	-	15000	-
Clause - 5, 8.1 & 8.2(E650, PHOSPHURS)	-	15000	-
Clause - 5, 8.1 & 8.2(E650, SULPHUR)	-	15000	-
Clause - 5, 8.1 & 8.2(E650, CARBON)	-	15000	-
Clause - 5, 8.1 & 8.2(E600, CARBON +EQUIVELENT )	-	15000	-
Clause - 5, 8.1 & 8.2(E600, ALUMINIUM)	-	15000	-
Clause - 5, 8.1 & 8.2(E600, SILICON)	-	15000	-
Clause - 5, 8.1 & 8.2(E600, NITROGEN)	-	15000	-
Clause - 5, 8.1 & 8.2(E600 ,MANGANESE)	-	15000	-
Clause - 5, 8.1 & 8.2(E600, PHOSPHURS)	-	15000	-
Clause - 5, 8.1 & 8.2(E600, SULPHUR)	-	15000	-
Clause - 5, 8.1 & 8.2(E600, CARBON)	-	15000	-
Clause - 5, 8.1 & 8.2(E550, CARBON +EQUIVELENT )	-	15000	-
Clause - 5, 8.1 & 8.2(E550, ALUMINIUM)	-	15000	-
Clause - 5, 8.1 & 8.2(E550, SILICON)	-	15000	-
Clause - 5, 8.1 & 8.2(E550, NITROGEN)	-	15000	-
Clause - 5, 8.1 & 8.2(E550 ,MANGANESE)	-	15000	-
Clause - 5, 8.1 & 8.2(E550, PHOSPHURS)	-	15000	-
Clause - 5, 8.1 & 8.2(E550, SULPHUR)	-	15000	-
Clause - 5, 8.1 & 8.2(E550, CARBON)	-	15000	-
Clause - 5, 8.1 & 8.2(E450, CARBON +EQUIVELENT )	-	15000	-
Clause - 5, 8.1 & 8.2(E450, ALUMINIUM)	-	15000	-
Clause - 5, 8.1 & 8.2(E450, SILICON)	-	15000	-
Clause - 5, 8.1 & 8.2(E450, NITROGEN)	-	15000	-
Clause - 5, 8.1 & 8.2(E450 ,MANGANESE)	-	15000	-
Clause - 5, 8.1 & 8.2(E450, PHOSPHURS)	-	15000	-
Clause - 5, 8.1 & 8.2(E450, SULPHUR)	-	15000	-
Clause - 5, 8.1 & 8.2(E450, CARBON)	-	15000	-
Clause - 5, 8.1 & 8.2(E410, CARBON +EQUIVELENT )	-	15000	-
Clause - 5, 8.1 & 8.2(E410, ALUMINIUM)	-	15000	-
Clause - 5, 8.1 & 8.2(E410, SILICON)	-	15000	-
Clause - 5, 8.1 & 8.2(E410, NITROGEN)	-	15000	-
Clause - 5, 8.1 & 8.2(E410 ,MANGANESE)	-	15000	-
Clause - 5, 8.1 & 8.2(E410, PHOSPHURS)	-	15000	-
Clause - 5, 8.1 & 8.2(E410, SULPHUR)	-	15000	-
Clause - 5, 8.1 & 8.2(E410, CARBON)	-	15000	-
Clause - 5, 8.1 & 8.2(E350, CARBON +EQUIVELENT )	-	15000	-
Clause - 5, 8.1 & 8.2(E350, ALUMINIUM)	-	15000	-
Clause - 5, 8.1 & 8.2(E350, SILICON)	-	15000	-
Clause - 5, 8.1 & 8.2(E350, NITROGEN)	-	15000	-
Clause - 5, 8.1 & 8.2(E350 ,MANGANESE)	-	15000	-
Clause - 5, 8.1 & 8.2(E350, PHOSPHURS)	-	15000	-
Clause - 5, 8.1 & 8.2(E350, SULPHUR)	-	15000	-
Clause - 5, 8.1 & 8.2(E350, CARBON)	-	15000	-
Clause - 5, 8.1 & 8.2(E300, CARBON +EQUIVELENT )	-	15000	-
Clause - 5, 8.1 & 8.2(E300, ALUMINIUM)	-	15000	-
Clause - 5, 8.1 & 8.2(E300, SILICON)	-	15000	-
Clause - 5, 8.1 & 8.2(E300, NITROGEN)	-	15000	-
Clause - 5, 8.1 & 8.2(E300 ,MANGANESE)	-	15000	-
Clause - 5, 8.1 & 8.2(E300, PHOSPHURS)	-	15000	-
Clause - 5, 8.1 & 8.2(E300, SULPHUR)	-	15000	-
Clause - 5, 8.1 & 8.2(E300, CARBON)	-	15000	-
Clause - 5, 8.1 & 8.2(E275, CARBON +EQUIVELENT )	-	15000	-
Clause - 5, 8.1 & 8.2(E275, ALUMINIUM)	-	15000	-
Clause - 5, 8.1 & 8.2(E275, SILICON)	-	15000	-
Clause - 5, 8.1 & 8.2(E275, NITROGEN)	-	15000	-
Clause - 5, 8.1 & 8.2(E275 ,MANGANESE)	-	15000	-
Clause - 5, 8.1 & 8.2(E275, PHOSPHURS)	-	15000	-
Clause - 5, 8.1 & 8.2(E275, SULPHUR)	-	15000	-
Clause - 5, 8.1 & 8.2(E275, CARBON)	-	15000	-
Clause - 5, 8.1 & 8.2(E250, CARBON +EQUIVELENT )	-	15000	-
Clause - 5, 8.1 & 8.2(E250, ALUMINIUM)	-	15000	-
Clause - 5, 8.1 & 8.2(E250, SILICON)	-	15000	-
Clause - 5, 8.1 & 8.2(E250, NITROGEN)	-	15000	-
Clause - 5, 8.1 & 8.2(E250 ,MANGANESE)	-	15000	-
Clause - 5, 8.1 & 8.2(E250, PHOSPHURS)	-	15000	-
Clause - 5, 8.1 & 8.2(E250, SULPHUR)	-	15000	-
Clause - 5, 8.1 & 8.2(E250, CARBON)	-	15000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon Equivalent- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000	-
Cl. 15, 16(Off Centre of Web)	-	15000	-
Cl. 15, 16(Flange out of square (I beam))	-	15000	-
Cl. 15, 16(Width of flange (I Beam))	-	15000	-
Cl. 15, 16(Depth (I Beam))	-	15000	-
Cl. 15, 16(Mass (Plate))	-	15000	-
Cl. 15, 16(Flange Slope)	-	15000	-
Cl. 15, 16(Web Thickness)	-	15000	-
Cl. 15, 16(Flange Thickness)	-	15000	-
Cl. 15, 16(Out of Square (Flat))	-	15000	-
Cl. 15, 16(Width )	-	15000	-
Cl. 15, 16(Thickness )	-	15000	-
Cl. 15, 16(Sectional Area )	-	15000	-
Cl. 15, 16(Camber (Angle))	-	15000	-
Cl. 15, 16(Out of Square (Angle))	-	15000	-
Cl. 15, 16(Weight)	-	15000	-
Cl. 15, 16(Leg Length Difference (Angle))	-	15000	-
Cl. 15, 16(Leg Length B (Angle))	-	15000	-
Cl. 15, 16(Leg Length A (Angle))	-	15000	-
Cl. 15, 16(Toe Radius R2)	-	15000	-
Cl. 15, 16(Root Radius R1)	-	15000	-
Cl 18(Weight)	-	15000	-
Cl 15(Length, Width & Thickness)	-	15000	-
Cl 13(Y Groove Cracking Test)	-	15000	-
Cl 12(Sudden Load Applied)	-	15000	-
Cl 11.3(Press)	-	15000	-
Cl 10.3(UTM)	-	15000	-
Cl 7(Workmanship)	-	15000	-
14.1(Soundness test)	-	15000	-
14.2(Grain Size)	-	15000	-
14.2(Inclusion)	-	15000	-
Cl 7(Workmanship)	-	15000	-
Cl 10.3(UTM)	-	15000	-
Cl 11.3(Press)	-	15000	-
Cl 12(Sudden Load Applied)	-	15000	-
Cl 13(Y Groove Cracking Test)	-	15000	-
Cl 15(Length, Width & Thickness)	-	15000	-
Cl 18(Weight)	-	15000	-
Clause 8, Table 1, Note 2(Any Instrumental Method/Chemical Method)	-	15000	-
Clause 8, Table 1, Note 5(Any Instrumental Method/Chemical Method)	-	15000	-
Clause 8, Table 1, Note 5(Any Instrumental Method/Chemical Method)	-	15000	-
Clause 8, Table 1, Note 5(By Calculation)	-	15000	-
Clause 8, Table 1, Note 6(Any Instrumental Method/Chemical Method)	-	15000	-
Clause 8, Table 1, Note 6(By Calculation)	-	15000	-
Clause 7(IS 2062)	-	15000	-
Clause 11.3(IS 1599)	-	15000	-
Clause 12(IS 1757)	-	15000	-
Clause 15, Table 4(IS 2062)	-	15000	-
16(Tolerance)	-	15000	-
20(Marking)	-	15000	-
20(MARKING)	-	15000	-
8(Micro Alloying elements)	-	15000	-
8(Niobium as Nb)	-	15000	-
8(Vanadium as V)	-	15000	-
8(Titanium as Ti)	-	15000	-
10(Tensile Strength-IS:1608(P1)-22)	-	15000	-
10(Yield Stress-IS:1608(P1)-22)	-	15000	-
10(Elongation on SoA 5.65mm GL)	-	15000	-
15(Mass -SOP MT-23)	-	15000	-
15(Sectional Area)	-	15000	-
15(Dimension -D)	-	15000	-
15(Dimension -B)	-	15000	-
15(Thickness - t)	-	15000	-
15(Thickness - T)	-	15000	-
15(Flange Slope)	-	15000	-
15(Radius R1)	-	15000	-
15(Radius R2)	-	15000	-
15(Mass -SOP MT-23)	-	15000	-
15(Sectional Area)	-	15000	-
15(Dimension -D)	-	15000	-
15(Dimension -B)	-	15000	-
15(Thickness - t)	-	15000	-
15(Thickness - T)	-	15000	-
15(Radius R1)	-	15000	-
15(Radius R2)	-	15000	-
15(Mass -SOP MT-23)	-	15000	-
15(Sectional Area)	-	15000	-
15(Dimensions AxB)	-	15000	-
15(Thickness - t)	-	15000	-
15(Radius -R1)	-	15000	-
15(Radius -R2)	-	15000	-
15(Diameter)	-	15000	-
15(Sectional Area)	-	15000	-
15(Mass per metre)	-	15000	-
15(Mass per metre)	-	15000	-
15(Ovality)	-	15000	-
15(Side Width)	-	15000	-
15(Sectional Area)	-	15000	-
15(Mass per metre)	-	15000	-
15(Out of Square)	-	15000	-
9(Preparation of test sample)	-	15000	-
Clause 8, Table 1, Note 2(Aluminium)	-	15000	-
Clause 8, Table 1, Note 5(Niobium)	-	15000	-
Clause 8, Table 1, Note 5(Titanium)	-	15000	-
Clause 8, Table 1, Note 5(Nb+V+Ti)	-	15000	-
Clause 8, Table 1, Note 6(Boron)	-	15000	-
Clause 8, Table 1, Note 6(Cr+Ni)	-	15000	-
Clause 7(Freedom from Defect)	-	15000	-
Clause 11.3(Bend Test)	-	15000	-
Clause 12(Impact Test)	-	15000	-
Clause 15, Table 4(Dimension)	-	15000	-
5(General Requirements)	-	15000	-
4(MARKING)	-	15000	-

19 Jun, 2028

-
Included w.e.f. 09.10.2025

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

ALL DESIGNATION

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9.4(Load In Other Direction From Bend)	-	16000	-
Cl 9.3(Load In One Direction)	-	16000	-
Cl 7.2(Weight)	-	16000	-
Cl 6.1(Length, Width & Thickness)	-	16000	-
Cl 5(Deformations and Surface Characteristics)	-	16000	-
Cl 9.4(Load In Other Direction From Bend)	-	16000	-
Cl 9.3(Load In One Direction)	-	16000	-
Cl 7.2(Weight)	-	16000	-
Cl 6.1(Length, Width & Thickness)	-	16000	-
Cl 5(Deformations and Surface Characteristics)	-	16000	-
Cl 9.4(Load In Other Direction From Bend)	-	16000	-
Cl 9.3(Load In One Direction)	-	16000	-
Cl 8.1(UTM)	-	16000	-
Cl 7.2(Weight)	-	16000	-
Cl 6.1(Length, Width & Thickness)	-	16000	-
Cl 5(Deformations and Surface Characteristics)	-	16000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON +EQUIVELENT )	-	16000	-
4.1(Sulphur and phosphorous)	-	16000	-
4.1(CE)	-	16000	-
4.1( Nitrogen%)	-	16000	-
4.1(Ni)	-	16000	-
4.1(Mo)	-	16000	-
4.1(Cr)	-	16000	-
4.1( Ti)	-	16000	-
4.1(V)	-	16000	-
4.1( Nb)	-	16000	-
4.1( Aluminium %)	-	16000	-
4.1( Copper %)	-	16000	-
4.1(Silicon %)	-	16000	-
4.1(Sulphur %)	-	16000	-
4.1(Phosphorus %)	-	16000	-
4.1(Manganese %)	-	16000	-
4.1(Carbon %)	-	16000	-
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	16000	-
Cl. 9.3, Table 4(Bend Test )	-	16000	-
Cl. 8.1 Table 3(Elongation, percentage)	-	16000	-
Cl. 8.1 Table 3(TS/YS ratio)	-	16000	-
Cl. 8.1 Table 3(Tensile Strength (TS))	-	16000	-
Cl. 8.1 Table 3(Yield Stress (YS))	-	16000	-
Cl. 7.2 Table -2 (Nominal Mass)	-	16000	-
Cl. 6.1(Nominal Size)	-	16000	-
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-	16000	-
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-	16000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR+PHOSPHUR)	-	16000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 MANGANESE)	-	16000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 NITROGEN)	-	16000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 PHOSPHURS)	-	16000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR)	-	16000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON )	-	16000	-
Cl.4.2 of IS 1786 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	16000	-
Cl.4.2 of IS 1786 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	16000	-
Cl.4.2 of IS 1786 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	16000	-
Cl.4.2 of IS 1786 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	16000	-
Cl.4.2 of IS 1786 (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	16000	-
Cl.4.2 of IS 1786 (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	16000	-
Cl.4.2 of IS 1786 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	16000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415D,Fe 415S, Fe 500D,Fe 500S,Fe 550D)(Carbon Equivalent)	-	16000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur & Phosphorous)	-	16000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Phosphorous- IS 228)	-	16000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur-IS 228)	-	16000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Carbon-IS 228)	-	16000	-
8.18.1 Table 3(Total elongation at maximum force)	-	16000	-
Cl 5(Deformations and Surface Characteristics)	-	16000	-
5.7(PullOut (Bond Test))	-	16000	-
4.2(Niobium (Nb))	-	16000	-
4.2(Boron (B))	-	16000	-
Cl. 5.7(Average compressive strength of cubes at 28 days)	-	16000	-
Cl. 5.7(Bond Strength at 0.25 mm slip)	-	16000	-
Cl. 5.7(Date of testing of concrete cubes)	-	16000	-
Cl. 5.7(Date of casting of concrete cubes)	-	16000	-
Cl. 8.1 Table 3(TS/YS Ratio)	-	16000	-
Cl. 5.3 (b)(The ribs contributing the projected area - Transverse Ribs)	-	16000	-
Cl. 5.3 (a)(The ribs contributing the projected area - Longitudinal Ribs)	-	16000	-
Cl. 8.1 Table 3(Maximum Extension)	-	16000	-
Cl. 8.1 Table 3(Total Elongation at Maximum Force)	-	16000	-
Cl. 6.2, 6.3 Table 1(Gross Cross Sectional Area, A)	-	16000	-
Cl. 4.3(Visual Inspection.)	-	16000	-
Cl. 5.2(Surface Characteristics)	-	16000	-
Clause 9.4(Rebend Test)	-	16000	-
Clause 6.3(Effective Cross-sectional Area)	-	16000	-
Clause 8.1(Table 3)(Total Elongation at Maximum Force)	-	16000	-
Cl 9.4(Load In Other Direction From Bend)	-	16000	-
Cl 9.3(Load In One Direction)	-	16000	-
Cl 8.1(UTM)	-	16000	-
Cl 7.2(Weight)	-	16000	-
Cl 6.1(Length, Width & Thickness)	-	16000	-
Cl 5(Deformations and Surface Characteristics)	-	16000	-
Cl 5(Deformations and Surface Characteristics)	-	16000	-
Cl 6.1(Length, Width & Thickness)	-	16000	-
Cl 7.2(Weight)	-	16000	-
Cl 8.1(UTM)	-	16000	-
Cl 9.3(Load In One Direction)	-	16000	-
Cl 9.4(Load In Other Direction From Bend)	-	16000	-
13(Identification and marking)	-	16000	-
5.7(Pull-out test - IS:2770(P1))	-	16000	-
7.0 & 7.1(Specified lengths - SOP MT-23)	-	16000	-
8.0 & 8.1("Total elongation at maximum force on 5.65 vSo mm GL. ")	-	16000	-
4.3(Rolling and cold working of bars/wire)	-	16000	-
7.1(Specified length)	-	16000	-
9.1(Preparation of test sample)	-	16000	-
9.2(Tensile test,IS:1608(Pt1)-2018)	-	16000	-
9.5(Retest)	-	16000	-
12(Inspection)	-	16000	-
Clause 4.2 Note 2, Amendment 1 & 3(Nb+V+B+Ti)	-	16000	-
Clause 4.2 Note 3, Amendment 1 & 3(Cr+Cu+Ni+Mo+P)	-	16000	-
Clause 4.2, Amendment 3 Note 4("In order to ascertain whether sufficient quantities of nitrogen binding elements are present, following formula may be used, where all elements are in ppm. (N−120)< (Al free/10)+((Ti+V)/7)+(Nb/14)")	-	16000	-
1()	-	16000	-

19 Jun, 2028

-
Included w.e.f. 09.10.2025

IS 280 (2006)

Mild steel wire for general engineering purposes (Fourth Revision)

ALL TYPES OF GRADES

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	6500	-
Cl 9(Tensile Test On UTM)	-	6500	-
Cl 11(Workmanship)	-	6500	-
Cl 13(Workmanship)	-	6500	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	6500	-
Cl 9(Tensile Test On UTM)	-	6500	-
Cl 11(Workmanship)	-	6500	-
Cl 13(Workmanship)	-	6500	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	6500	-
Cl 9(Tensile Test On UTM)	-	6500	-
Cl 11(Workmanship)	-	6500	-
Cl 13(Workmanship)	-	6500	-
6 AND AS PER IS 7887(MICRO ALLOY)	-	6500	-
6 AND AS PER IS 7887(ALUMINIUM)	-	6500	-
6 AND AS PER IS 7887(PHOSPHORUS)	-	6500	-
6 AND AS PER IS 7887(SULPHUR)	-	6500	-
6 AND AS PER IS 7887(MANGANESE)	-	6500	-
6 AND AS PER IS 7887(SILICON)	-	6500	-
6 AND AS PER IS 7887(CARBON)	-	6500	-
7 & 8(Ovality)	-	6500	-
7 & 8(Diameter)	-	6500	-
9.2(Wrapping Test)	-	6500	-
9.3(Bend test)	-	6500	-
10(Finish)	-	6500	-
11(Coating test)	-	6500	-
13(Freedom from defects)	-	6500	-
Cl 13(Workmanship)	-	6500	-
Cl 11(Workmanship)	-	6500	-
Cl 9(Tensile Test On UTM)	-	6500	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	6500	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	6500	-
Cl 9(Tensile Test On UTM)	-	6500	-
Cl 11(Workmanship)	-	6500	-
Cl 13(Workmanship)	-	6500	-
Clause 6 and Note 3 of IS 7887(Any Instrumental Method/Chemical Method)	-	6500	-
Clause 6 and Note 3 of IS 7887(Copper)	-	6500	-
14(Packing)	-	6500	-
15(Marking)	-	6500	-
Clause 6 and Note 3 of IS 7887(Copper)	-	6500	-
CL 08(AVG Outer dia (08))	-	6500	-
CL 08(MAX OVALITY (08))	-	6500	-

19 Jun, 2028

-
Included w.e.f. 09.10.2025

IS 733 (1983)

Specification for wrought aluminium and aluminium alloy bars, rods and sections (For General Engineering Purposes) (Third Revision)

ALL TYPES

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4(Freedom from Defects)	-	6000	-
Cl. 5.1, Table 2(0.2 Percent proof stress- IS 1816)	-	6000	-
Cl. 5.1, Table 2(Tensile Strength- IS 1816)	-	6000	-
Cl. 5.1, Table 2(Elongation on 50 mm or 5.65√So Gauge Length)	-	6000	-
Cl. 0.4, 5.1, Table 1(Aluminium- IS 504 or by any other suitable instrumental method)	-	6000	-
Cl. 0.4, 5.1, Table 1(Copper- IS 504 or by any other suitable instrumental method)	-	6000	-
Cl. 0.4, 5.1, Table 1(Magnesium- IS 504 or by any other suitable instrumental method)	-	6000	-
Cl. 0.4, 5.1, Table 1(Silicon- IS 504 or by any other suitable instrumental method)	-	6000	-
Cl. 0.4, 5.1, Table 1(Iron- IS 504 or by any other suitable instrumental method)	-	6000	-
Cl. 0.4, 5.1, Table 1(Zinc- IS 504 or by any other suitable instrumental method)	-	6000	-
Cl. 0.4, 5.1, Table 1(Aluminium- IS 504 or by any other suitable instrumental method)	-	6000	-
Cl. 0.4, 5.1, Table 1(Titanium and / or other grain refining elements - IS 504 or by any other suitable instrumental method)	-	6000	-
Cl. 0.4, 5.1, Table 1(Chromium- IS 504 or by any other suitable instrumental method)	-	6000	-
Cl. 0.4, 5.1, Table 1(Ti+ V- IS 504 or by any other suitable instrumental method)	-	6000	-
Cl. 0.4, 5.1, Table 1(Total Impurities- IS 504 or by any other suitable instrumental method)	-	6000	-
Cl. 0.4, 5.1, Table 1(Cr+ Mn- IS 504 or by any other suitable instrumental method)	-	6000	-
7(Dimension - IS 3965)	-	6000	-
11(Marking)	-	6000	-
Table-1, Clause - 5.1(Copper)	-	6000	-
Table-1, Clause - 5.1(Iron)	-	6000	-
Table-1, Clause - 5.1(Magnesium)	-	6000	-
Table-1, Clause - 5.1(Manganese)	-	6000	-
Table-1, Clause - 5.1(Titanium)	-	6000	-
Table-1, Clause - 5.1(Silicon)	-	6000	-
Table-1, Clause - 5.1(Chromium)	-	6000	-
Table-1, Clause - 5.1(Zinc)	-	6000	-

19 Jun, 2028

-
Included w.e.f. 09.10.2025

IS 617 (2024)

Aluminium and Aluminium Alloys Ingots for Remelting and Castings for General Engineering Purposes â Specification (Fourth Revision)

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6.1, Table-1(Si)	-	14500	-
Cl-6.1, Table-1(Fe)	-	14500	-
Cl-6.1, Table-1(Cu)	-	14500	-
Cl-6.1, Table-1(Mn)	-	14500	-
Cl-6.1, Table-1(Mg)	-	14500	-
Cl-6.1, Table-1(Cr)	-	14500	-
Cl-6.1, Table-1(Ni)	-	14500	-
Cl-6.1, Table-1(Zn)	-	14500	-
Cl-6.1, Table-1(Pb)	-	14500	-
Cl-6.1, Table-1(Sn)	-	14500	-
Cl-6.1, Table-1(Ti)	-	14500	-
Cl-6.1, Table-1(Others elements Each)	-	14500	-
Cl-6.1, Table-1(Others elements Total)	-	14500	-
Cl-6.1, Table-1(Aluminium)	-	14500	-
Cl-6.2(The chemical analysis)	-	14500	-
Cl-7.1, Table-2(Sand-Cast Alloys- Tensile Strength)	-	14500	-
Cl-7.1, Table-2(Sand-Cast Alloys- Proof Stress)	-	14500	-
Cl-7.1, Table-2(Sand-Cast Alloys- Elongation)	-	14500	-
Cl-7.1, Table-2(Sand-Cast Alloys- Brinell Hardness HBW)	-	14500	-
Cl-7.1, Table-3(Chill Cast Alloys- Tensile Strength)	-	14500	-
Cl-7.1, Table-3(Chill Cast Alloys- Proof Stress)	-	14500	-
Cl-7.1, Table-3(Chill Cast Alloys- Elongation)	-	14500	-
Cl-7.1, Table-3(Chill Cast Alloys- Brinell Hardness HBW)	-	14500	-
Cl-7.1, Table-4(Investment-Cast Alloys- Tensile Strength)	-	14500	-
Cl-7.1, Table-4(Investment-Cast Alloys- Proof Stress)	-	14500	-
Cl-7.1, Table-4(Investment-Cast Alloys- Elongation)	-	14500	-
Cl-7.1, Table-4(Investment-Cast Alloys-Brinell Hardness)	-	14500	-
Cl-7.2(Tensile Tests)	-	14500	-
Cl-7.3(Test Pieces)	-	14500	-
Cl-7.4(Hardness)	-	14500	-
Cl-8(Freedom from Defects)	-	14500	-
Cl-11(RETEST)	-	14500	-
Cl-13(Marking)	-	14500	-
Cl. 6(Silicon)	-	14500	-
Cl. 6(Iron)	-	14500	-
Cl. 6(Copper)	-	14500	-
Cl. 6(Manganese)	-	14500	-
Cl. 6(Magnesium)	-	14500	-
Cl. 6(Chromium)	-	14500	-
Cl. 6(Nickel)	-	14500	-
Cl. 6(Zinc)	-	14500	-
Cl. 6(Lead)	-	14500	-
Cl. 6(Tin)	-	14500	-
Cl. 6(Titanium)	-	14500	-
Cl. 6(Others Element Each)	-	14500	-
Cl. 6(Others Element Total)	-	14500	-
Cl. 6(Aluminium)	-	14500	-
Cl. 6(Silver)	-	14500	-
Cl. 6(Zirconium)	-	14500	-
Cl. 6(Titanium+Zirconium)	-	14500	-
Cl. 6(Antimony)	-	14500	-
Cl. 6(Cobalt)	-	14500	-
Cl. 6(Antimony+Cobalt)	-	14500	-
Cl. 6(Beryllium)	-	14500	-
10(Pressure Test)	-	14500	-

19 Jun, 2028

-
Included w.e.f. 09.10.2025

IS 18800 (2023)

Stainless steel feeding bottle for infants -- Specification

ALL GRADE

19000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4.1(Carbon - IS 228 and its parts or any other intrumental/chemical methods)	-	5000	-
Cl.4.1(Silicon - IS 228 and its parts or any other intrumental/chemical methods)	-	5000	-
Cl.4.1(Manganese - IS 228 and its parts or any other intrumental/chemical methods)	-	5000	-
Cl.4.1(Nickel - IS 228 and its parts or any other intrumental/chemical methods)	-	5000	-
Cl.4.1(Chromium - IS 228 and its parts or any other intrumental/chemical methods)	-	5000	-
Cl.4.1(Sulphur - IS 228 and its parts or any other intrumental/chemical methods)	-	5000	-
Cl.4.1(Phosphorous - IS 228 and its parts or any other intrumental/chemical methods)	-	5000	-
Cl.4.1(Nitrogen - IS 228 and its parts or any other intrumental/chemical methods)	-	5000	-
Cl.4.1(Molybdenum - IS 228 and its parts or any other intrumental/chemical methods)	-	5000	-
Cl.4.1(Copper - IS 228 and its parts or any other intrumental/chemical methods)	-	5000	-
Cl.4.1(Other Elements - IS 228 and its parts or any other intrumental/chemical methods)	-	5000	-
5.1.1(Description)	-	1000	-
5.1.2(Manufacture, Workmanship, Finish and Appearance)	-	1000	-
5.1.3(Wall Thickness)	-	1000	-
5.1.4(Capacity)	-	1000	-
5.2(Mechanical Requirements)	-	3000	-
5.3.1(Leakage Test)	-	1500	-
5.3.2(Drop Test)	-	1500	-
5.3.3(Compressive Deformation Resistance)	-	3000	-
5.3.4(Permanency of Pigments of Printed Container)	-	1000	-
5.1.1(Description)	-	1000	-
5.1.2(Manufacture, Workmanship, Finish and Appearance)	-	1000	-
5.1.3(Wall Thickness)	-	1000	-
5.1.4(Capacity)	-	1000	-
5.2(Mechanical Requirements)	-	3000	-
5.3.1(Leakage Test)	-	1500	-
5.3.2(Drop Test)	-	1500	-
5.3.3(Compressive Deformation Resistance)	-	3000	-
5.3.4(Permanency of Pigments of Printed Container)	-	1000	-
Cl.5.3.4(Permanency of Pigments - Annex D of IS 18800)	-	1000	-

19 Jun, 2028

-
Included w.e.f. 09.10.2025

IS 21 (2025)

Wrought Aluminium and Aluminium Alloys for Manufacture of Utensils - Specification (Fifth Revision)

All Types

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General requirements)	-	9000	-
Cl-5.1(Material)	-	9000	-
Cl-5.2(Chemical composition and mechanical properties of grades in Cl 5.1)	-	9000	-
Cl-5.3.1 a("Wrought Aluminium (with Minimum 99 Percent Al Content)- Iron+ Silicon")	-	9000	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Chromium")	-	9000	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Magnesium")	-	9000	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Manganese")	-	9000	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Nickel")	-	9000	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Zinc")	-	9000	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Titanium")	-	9000	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Tin")	-	9000	-
Cl-5.3.1 c("Wrought Aluminium (with Minimum 99 Percent Al Content)- Copper")	-	9000	-
Cl-5.3.1 Note 1("Wrought Aluminium (with Minimum 99 Percent Al Content)- Aluminium")	-	9000	-
Cl-5.3.1 d("Wrought Aluminium (with Minimum 99 Percent Al Content)- Others")	-	9000	-
Cl-5.3.2, Table-1 (i)(Wrought Aluminium Alloys-Silicon)	-	9000	-
Cl-5.3.2, Table-1 (ii)(Wrought Aluminium Alloys-Iron)	-	9000	-
Cl-5.3.2, Table-1 (iii)(Wrought Aluminium Alloys-Copper)	-	9000	-
Cl-5.3.2, Table-1 (iv)(Wrought Aluminium Alloys-Manganese)	-	9000	-
Cl-5.3.2, Table-1 (v)(Wrought Aluminium Alloys-Magnesium)	-	9000	-
Cl-5.3.2, Table-1 (vi)(Wrought Aluminium Alloys-Chromium)	-	9000	-
Cl-5.3.2, Table-1 (vii)(Wrought Aluminium Alloys-Nickel)	-	9000	-
Cl-5.3.2, Table-1 (viii)(Wrought Aluminium Alloys-Zinc)	-	9000	-
Cl-5.3.2, Table-1 (ix)(Wrought Aluminium Alloys -Zirconium)	-	9000	-
Cl-5.3.2, Table-1 (x)(Wrought Aluminium Alloys - Titanium)	-	9000	-
Cl-5.3.2, Table-1 (Note 3)(Wrought Aluminium Alloys- Aluminium)	-	9000	-
Cl-5.3.2, Table-1 (xi)(Wrought Aluminium Alloys- Others)	-	9000	-
Cl 5.4(Lead)	-	9000	-
Cl 5.4(Cadmium)	-	9000	-
Cl 5.4(Arsenic)	-	9000	-
Cl-7(Dimension)	-	9000	-
Cl-8(EARING TEST (OPTIONAL TEST))	-	9000	-

19 Jun, 2028

-
Included w.e.f.08.10.2025

IS 1285 (2023)

WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS EXTRUDED ROUND TUBE AND HOLLOW SECTIONS FOR GENERAL ENGINEERINGPURPOSES SPECIFICATION

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.9.1(Aluminium- IS 504 and its parts or any other intrumental/chemical methods)	-	7500	-
Cl.9.1(Copper- IS 504 and its parts or any other intrumental/chemical methods)	-	7500	-
Cl.9.1(Iron- IS 504 and its parts or any other intrumental/chemical methods)	-	7500	-
Cl.9.1(Magnesium- IS 504 and its parts or any other intrumental/chemical methods)	-	7500	-
Cl.9.1(Silicon- IS 504 and its parts or any other intrumental/chemical methods)	-	7500	-
Cl.9.1(Manganese- IS 504 and its parts or any other intrumental/chemical methods)	-	7500	-
Cl.9.1(Zinc- IS 504 and its parts or any other intrumental/chemical methods)	-	7500	-
Cl.9.1(Titanium and/ or other grain refining elements- IS 504 and its parts or any other intrumental/chemical methods)	-	7500	-
Cl.9.1(Chromium- IS 504 and its parts or any other intrumental/chemical methods)	-	7500	-
Cl.9.1(Remarks (Ti+V) - IS 504 and its parts or any other intrumental/chemical methods)	-	7500	-
Cl.9.1(Remarks (Cr+Mn) - IS 504 and its parts or any other intrumental/chemical methods)	-	7500	-
Cl.9.1(Remarks (Total Impurities)- IS 504 and its parts or any other intrumental/chemical methods)	-	7500	-
6(FREEDOM FROM DEFECTS)	-	7500	-
8(DIMENSIONS AND TOLERANCES)	-	7500	-
10(MECHANICAL PROPERTIES)	-	7500	-
Cl. 9(Aluminium)	-	7500	-
Cl. 9(Copper)	-	7500	-
Cl. 9(Magnesium)	-	7500	-
Cl. 9(Silicon)	-	7500	-
Cl. 9(Iron)	-	7500	-
Cl. 9(Manganese)	-	7500	-
Cl. 9(Zinc)	-	7500	-
Cl. 9(Titanium and/or other grain refining elements)	-	7500	-
Cl. 9(Chromium)	-	7500	-
Cl. 9(Ti+V)	-	7500	-
Cl. 9(Cr+Mn)	-	7500	-
Clause-10(Tensile strength)	-	7500	-
Cl.9.1(Aluminium- IS 504 and its parts or any other intrumental/chemical methods)	-	7500	-
Cl.9.1(Copper- IS 504 and its parts or any other intrumental/chemical methods)	-	7500	-
Cl.9.1(Iron- IS 504 and its parts or any other intrumental/chemical methods)	-	7500	-
Cl.9.1(Magnesium- IS 504 and its parts or any other intrumental/chemical methods)	-	7500	-
Cl.9.1(Silicon- IS 504 and its parts or any other intrumental/chemical methods)	-	7500	-
Cl.9.1(Manganese- IS 504 and its parts or any other intrumental/chemical methods)	-	7500	-
Cl.9.1(Zinc- IS 504 and its parts or any other intrumental/chemical methods)	-	7500	-
Cl.9.1(Titanium and/ or other grain refining elements- IS 504 and its parts or any other intrumental/chemical methods)	-	7500	-
Cl.9.1(Chromium- IS 504 and its parts or any other intrumental/chemical methods)	-	7500	-
Cl.9.1(Remarks (Ti+V) - IS 504 and its parts or any other intrumental/chemical methods)	-	7500	-
Cl.9.1(Remarks (Cr+Mn) - IS 504 and its parts or any other intrumental/chemical methods)	-	7500	-
Cl.9.1(Remarks (Total Impurities)- IS 504 and its parts or any other intrumental/chemical methods)	-	7500	-
6(FREEDOM FROM DEFECTS)	-	7500	-
8(DIMENSIONS AND TOLERANCES)	-	7500	-
10(MECHANICAL PROPERTIES)	-	7500	-
Cl. 9(Aluminium)	-	7500	-
Cl. 9(Copper)	-	7500	-
Cl. 9(Magnesium)	-	7500	-
Cl. 9(Silicon)	-	7500	-
Cl. 9(Iron)	-	7500	-
Cl. 9(Manganese)	-	7500	-
Cl. 9(Zinc)	-	7500	-
Cl. 9(Titanium and/or other grain refining elements)	-	7500	-
Cl. 9(Chromium)	-	7500	-
Cl. 9(Ti+V)	-	7500	-
Cl. 9(Cr+Mn)	-	7500	-
Clause-10(Tensile strength)	-	7500	-
Cl.9.1(Aluminium- IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.9.1(Copper- IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.9.1(Iron- IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.9.1(Magnesium- IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.9.1(Silicon- IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.9.1(Manganese- IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.9.1(Zinc- IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.9.1(Titanium and/ or other grain refining elements- IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.9.1(Chromium- IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.9.1(Remarks (Ti+V) - IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.9.1(Remarks (Cr+Mn) - IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.9.1(Remarks (Total Impurities)- IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
6(FREEDOM FROM DEFECTS)	-	0	-
8(DIMENSIONS AND TOLERANCES)	-	0	-
10(MECHANICAL PROPERTIES)	-	0	-
Cl. 9(Aluminium)	-	0	-
Cl. 9(Copper)	-	0	-
Cl. 9(Magnesium)	-	0	-
Cl. 9(Silicon)	-	0	-
Cl. 9(Iron)	-	0	-
Cl. 9(Manganese)	-	0	-
Cl. 9(Zinc)	-	0	-
Cl. 9(Titanium and/or other grain refining elements)	-	0	-
Cl. 9(Chromium)	-	0	-
Cl. 9(Ti+V)	-	0	-
Cl. 9(Cr+Mn)	-	0	-
Clause-10(Tensile strength)	-	0	-

19 Jun, 2028

-
Included w.e.f.08.10.2025

IS 7454 (2024)

Rehabilitation Equipment â Wheelchairs, Folding, Adult Size â Specification (Second Revision)

42000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(SHAPE AND DIMENSIONS)	-	500	-
Cl-6(Materials)	-	8000	-
Cl-7.1(Backrest and Seat)	-	500	-
Cl-7.2(Frame)	-	500	-
Cl-7.3(Footrests and Supports)	-	200	-
Cl-7.4(Armrests)	-	1000	-
Cl-7.5(Hand Rims)	-	1000	-
Cl-7.6(Brakes)	-	1000	-
Cl-7.7(Castors)	-	1000	-
Cl-7.8(Wheels)	-	1000	-
Cl-7.9(Clothing Guards)	-	3000	-
Cl-7.10(Folding Mechanism)	-	3000	-
Cl-7.11(Lubrication)	-	1000	-
Cl-8(Finish)	-	500	-
Cl-9.1(Test for Wheeling)	-	500	-
Cl-9.2(Hazard Running Test)	-	8000	-
Cl-9.3(Load Test)	-	5000	-
Cl-9.4(Test for Folding)	-	3000	-
Cl-9.5(Stability Test)	-	3000	-
Cl-11(Marking)	-	300	-
Cl-5(SHAPE AND DIMENSIONS)	-	0	-
Cl-6(Materials)	-	0	-
Cl-7.1(Backrest and Seat)	-	0	-
Cl-7.2(Frame)	-	0	-
Cl-7.3(Footrests and Supports)	-	0	-
Cl-7.4(Armrests)	-	0	-
Cl-7.5(Hand Rims)	-	0	-
Cl-7.6(Brakes)	-	0	-
Cl-7.7(Castors)	-	0	-
Cl-7.8(Wheels)	-	0	-
Cl-7.9(Clothing Guards)	-	0	-
Cl-7.10(Folding Mechanism)	-	0	-
Cl-7.11(Lubrication)	-	0	-
Cl-8(Finish)	-	0	-
Cl-9.1(Test for Wheeling)	-	0	-
Cl-9.2(Hazard Running Test)	-	0	-
Cl-9.3(Load Test)	-	0	-
Cl-9.4(Test for Folding)	-	0	-
Cl-9.5(Stability Test)	-	0	-
Cl-11(Marking)	-	0	-
Cl-5(SHAPE AND DIMENSIONS)	-	0	-
Cl-6(Materials)	-	0	-
Cl-7.1(Backrest and Seat)	-	0	-
Cl-7.2(Frame)	-	0	-
Cl-7.3(Footrests and Supports)	-	0	-
Cl-7.4(Armrests)	-	0	-
Cl-7.5(Hand Rims)	-	0	-
Cl-7.6(Brakes)	-	0	-
Cl-7.7(Castors)	-	0	-
Cl-7.8(Wheels)	-	0	-
Cl-7.9(Clothing Guards)	-	0	-
Cl-7.10(Folding Mechanism)	-	0	-
Cl-7.11(Lubrication)	-	0	-
Cl-8(Finish)	-	0	-
Cl-9.1(Test for Wheeling)	-	0	-
Cl-9.2(Hazard Running Test)	-	0	-
Cl-9.3(Load Test)	-	0	-
Cl-9.4(Test for Folding)	-	0	-
Cl-9.5(Stability Test)	-	0	-
Cl-11(Marking)	-	0	-

19 Jun, 2028

-
Included w.e.f.08.10.2025

IS 10701 (2012)

Structural plywood - Specification (First Revision)

21000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.3(Glue Shear strength in dry state)	-	20999.97	-
11.4.1(Resistance to Water)	-	20999.96	-
11.4.2(Resistance to Water)	-	20999.98	-
11.5(Resistance to Micro-organisms)	-	20999.98	-
11.6(Tensile Strength)	-	20999.99	-
11.7.1(Compressive Strength, Bending Strength, Panel Shear Strength, Plate Shear Strength and Rolling Shear Strngth)	-	20999.98	-
11.8(Wet Bending Strength)	-	21000	-
Clause 11.2(Moisture content)	-	20999.97	-
Cl-8(Dimension and tolerances)	-	20999.98	-
Cl-9(Workmanship and finish)	-	21000	-
Cl-7.1(Veneers)	-	20999.98	-
Cl-7.2(Construction)	-	21000	-
Cl-11.9(Retention of preservatives)	-	20999.98	-
Cl-4(Material)	-	21000	-
Cl-5(Plywood)	-	20999.97	-
Clause. 7.3(Consruction Inclination)	-	21000	-
Clause. 7.4(Moisture content)	-	20999.98	-
Cl-8.2(Thicnkess)	-	20999.97	-
Cl-8.3.1(Length)	-	20999.98	-
Cl-8.3.1(width)	-	21000	-
Cl-8.3.1(Tolerances- Thickness)	-	21000	-
Cl-8.3.1(Edge Straightness)	-	20999.98	-
Cl-8.3.1(Squareness)	-	20999.98	-
Cl-11.6, Table-3 (i)((Modulus of Rupture: Across the Face Grain: Min Ind.))	-	20999.97	-
Cl-11.8, Table-4((Modulus of Rupture: Across the Face Grain: Avg))	-	21000	-
Cl-11.8, Table-4((Modulus of Rupture: Along the Face Grain: Min Ind))	-	20999.99	-
Cl-11.8, Table-4(Modulus of Rupture: Along the Face Grain: Avg))	-	20999.98	-
Cl-11.8, Table-4(Modulus of Elasticity: Across the Face Grain: Min Ind)	-	21000	-
Cl-11.8, Table-4((Modulus of Elasticity: Across the Face Grain: Avg))	-	20999.99	-
Cl-11.8, Table-4((Modulus of Elasticity: Along the Face Grain: Min Ind))	-	21000	-

19 Jun, 2028

-
Included w.e.f.12.09.2025

IS 1328 (2025)

Veneered Decorative Plywood - Specification ( Fourth Revision )

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4.1(Grades)	-	7999.97	-
Cl 4.2(Type)	-	7999.96	-
Cl 4.3(Formaldehyde Class)	-	7999.98	-
Cl 5.2(Adhesive)	-	7999.98	-
Cl 7.1(Surface Requirements- For Type 1)	-	7999.98	-
Cl 7.2(Surface Requirements- For Type 2)	-	7999.97	-
Cl 7.3(Surface Requirements- For Type 3)	-	7999.97	-
Cl 7.4(Surface Requirements- For Type 4)	-	8000	-
Cl 8.1(Dimensions (Length and Width))	-	7999.98	-
Cl 8.2(Dimensions (Thickness))	-	7999.99	-
Cl 8.3(Squareness and Edge Straightness as Per Annex B)	-	7999.98	-
Cl 8.4- Table 1(Tolerances)	-	7999.97	-
Cl 11.3(Moisture Content)	-	7999.98	-
Cl 11.4.1(a)(Water Resistance Test( For MR Grade))	-	7999.98	-
Cl 11.4.1(b)(Water Resistance Test( For BWR Grade))	-	7999.98	-
Cl 11.4.1(c)(Water Resistance Test( For BWP Grade))	-	8000	-
Cl 11.5(Formaldehyde Content Test)	-	7999.98	-
Cl 11.6(Steady - State Formaldehyde Emission Test ( Optional Test))	-	7999.98	-
Cl 12(Marking)	-	8000	-

19 Jun, 2028

-
Included w.e.f.12.09.2025

IS 848 (2025)

Synthetic Resin Adhesives for Plywood (Phenolic, Aminoplastic and Bio-Materials Based) - Specification ( Third Revision )

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 4 Table 1(TYPES)	-	8500	-
As per Clause 6.6(SETTING TIMES AND CONDITIONS)	-	8500	-
As per Clause 7.3.2 Table 1(i)(Cyclic Test For BWP Type)	-	8500	-
As per Clause 7.3.2 Table 1(ii)(Cyclic Test For BWR Type)	-	8500	-
As per Clause 7.3.2 Table 1(iii)(Cyclic Test For MR Type)	-	8500	-
As per Clause 7.4(Acidity And Alkalinity (pH))	-	8500	-
As per Clause 9(Marking)	-	8500	-

19 Jun, 2028

-
Included w.e.f.12.09.2025

IS 2191 : Part 1 (2022)

WOODEN FLUSH DOOR SHUTTERS CELLULAR TUBULAR AND HOLLOW CORE TYPE SPECIFICATION PART 1 PLYWOOD FACE PANELS Fifth Revision

26000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(Sizes)	-	26000	-
Cl-6.1.1(Species of timber)	-	26000	-
Cl-6.3(Cross-Bands)	-	26000	-
Cl-6.4.1(Commercial face veneers)	-	26000	-
Cl-6.4.2(Decorative face veneers)	-	26000	-
Cl-6.7(Particle Board)	-	26000	-
Cl-6.8(Laminated veneer lumber (LVL), veneer laminated lumber (VLL), Medium Density Fibre (MDF))	-	26000	-
Cl-11.1(Dimensions and Squareness Test)	-	26000	-
Cl-11.2(General Flatness Test)	-	26000	-
Cl-11.3(Local Planeness Test)	-	26000	-
Cl-11.4(Impact Indentation Test)	-	26000	-
Cl-11.5(Flexure Test)	-	26000	-
Cl-11.6(Edge Loading Test)	-	26000	-
Cl-11.7(Shock Resistance Test)	-	26000	-
Cl-11.8(Buckling Resistance Test)	-	26000	-
Cl-11.9(Slamming Test)	-	26000	-
Cl-11.10(Misuse Test)	-	26000	-
Cl-11.11(Varying Humidity Test)	-	26000	-
Cl-11.12(End Immersion Test)	-	26000	-
Cl-11.13(Knife Test)	-	26000	-
Cl-11.14(Glue Adhesion Test)	-	26000	-
Cl-11.15(Screw Withdrawal Resistance Test)	-	26000	-
Cl-12.2(Sample Size)	-	26000	-
Cl-14(Marking)	-	26000	-
Cl-6.1.2(Moisture content of timber)	-	26000	-
Cl-9(Workmanship and Finish)	-	26000	-
Cl-6.1.3(Defects)	-	26000	-
Cl-6.2(Plywood)	-	26000	-
Cl-6.5(Cross-bands and face veneers)	-	26000	-
Cl-6.6(Adhesives)	-	26000	-
Cl-7(Construction)	-	26000	-
Cl-8(Fittings)	-	26000	-

19 Jun, 2028

-
Included w.e.f.08.09.2025

IS 2191 : Part 2 (2022)

WOODEN FLUSH DOOR SHUTTERS (CELLULAR, HOLLOW AND TUBULAR CORE TYPE) - SPECIFICATION PART 2 PARTICLE BOARD, HIGH DENSITY FIBRE BOARD, MEDIUM DENSITY FIBRE BOARD AND FIBRE HARDBOARD FACE PANELS (Fourth Revision)

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(Sizes and Tolerances)	-	30000	-
Cl-6.1.(Timber)	-	30000	-
Cl-6.2(Laminated veneer lumber (LVL), veneer laminated lumber (VLL), medium density fibre board (MDF), high density fibre board (HDF))	-	30000	-
Cl-6.3.1(Particle board)	-	30000	-
Cl-6.3.2(MDF board and HDF board)	-	30000	-
Cl-6.3.5(shutters with fibre hardboard face)	-	30000	-
Cl-8.1(Locks)	-	30000	-
Cl-10.1(various test)	-	30000	-
Cl-10.2(End Immersion Test)	-	30000	-
Cl-10.3(Glue Adhesion Test)	-	30000	-
Cl-13(Marking)	-	30000	-
Cl-5(Sizes and Tolerances)	-	30000	-
Cl-6.1.(Timber)	-	30000	-
Cl-6.2(Laminated veneer lumber (LVL), veneer laminated lumber (VLL), medium density fibre board (MDF), high density fibre board (HDF))	-	30000	-
Cl-6.3.1(Particle board)	-	30000	-
Cl-6.3.2(MDF board and HDF board)	-	30000	-
Cl-6.3.5(shutters with fibre hardboard face)	-	30000	-
Cl-8.1(Locks)	-	30000	-
Cl-10.1(various test)	-	30000	-
Cl-10.2(End Immersion Test)	-	30000	-
Cl-10.3(Glue Adhesion Test)	-	30000	-
Cl-13(Marking)	-	30000	-

19 Jun, 2028

-
Included w.e.f.08.09.2025

IS 4990 (2024)

PLYWOOD FOR CONCRETE SHUTTERING WORKS SPECIFICATION (Fourth Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Timber)	-	25000	-
Cl-5.2(Adhesives for Bonding of Veneers)	-	25000	-
Cl-6.1(Manufacture)	-	25000	-
Cl-6.2(Manufacture ( Thickness of veneers))	-	25000	-
Cl-6.3(Manufacture ( Physical and mechanical properties of veneers))	-	25000	-
Cl-6.4, 6.7(Manufacture (Plywood for concrete shuttering))	-	25000	-
Cl-6.5(Manufacture (Scarf joints))	-	25000	-
Cl-6.6(Manufacture ( Preservative treatment))	-	25000	-
Cl-7.1(Dimensions -length)	-	25000	-
Cl-7.2(Thickness)	-	25000	-
Cl-7.3(Squareness)	-	25000	-
Cl-8.1, 8.2(Workmanship and finish)	-	25000	-
Cl-10.3(Moisture Content)	-	25000	-
Cl-10.4.1(Glue Adhesion in Dry State - Glue Shear Strength)	-	25000	-
Cl-10.4.2(Glue Adhesion in Dry State - Adhesion of Plies)	-	25000	-
Cl-10.5, 10.5.1(Resistance to Water Test)	-	25000	-
Cl-10.5.1.1(Water Resistance Test-Glue shear strength)	-	25000	-
Cl-10.5.1.2(Water Resistance Test-Adhesion of plies)	-	25000	-
Cl-10.5.2(Water Resistance Test (Alternate method))	-	25000	-
Cl-10.6(Water resistance test (Concrete shuttering Plywood))	-	25000	-
Cl-10.7.1, Table-2(Mycological Test- Glue shear strengt)	-	25000	-
Cl-10.7.2(Mycological Test- Adhesion of plies)	-	25000	-
Cl-10.8(Tensile Strength)	-	25000	-
Cl-10.9, Table-3 (i)(Along (parallel to the grain direction of the face veneer))	-	25000	-
Cl-10.9, Table-3 (ii)(Across (perpendicular to the grain direction of the face veneer))	-	25000	-
Cl-10.10, Table-4 (i) a(Wet Bending Strength -Modulus of Elasticity (MOE),- Average)	-	25000	-
Cl-10.10, Table-4 (i) b(Wet Bending Strength - Modulus of Elasticity (MOE),- Minimum individual)	-	25000	-
Cl-10.11(Retention of Preservative)	-	25000	-
Cl-10.12(Formaldehyde Content Test)	-	25000	-
Cl-10.13(Steady-State Formaldehyde Emission Test)	-	25000	-
Cl-10.10, Table-4 (ii) a(Wet Bending Strength:- Modulus of Rupture (MOR),- Average)	-	25000	-
Cl-10.10, Table-4, (ii) b(Wet Bending Strength; Modulus of Rupture (MOR),- Minimum individual)	-	25000	-
Cl-10.4.1, 10.5.1.1 and 10.7.1, Table-2(Average Wood Failure)	-	25000	-
Cl-10.4.1, 10.5.1.1 and 10.7.1, Table-2(Average Failure Load, N -Dry State)	-	25000	-
Cl-10.4.1, 10.5.1.1 and 10.7.1, Table-2(Average Failure Load, N- Resistance to Water)	-	25000	-
Cl-10.4.1, 10.5.1.1 and 10.7.1, Table-2(Average Failure Load, N - Resistance to Micro-Organisms)	-	25000	-
Cl-10.8 (a)(Tensile strength)	-	25000	-
Cl-10.8 (b)(Tensile strength)	-	25000	-
Cl-10.8 (c)(Tensile strengths in both directions)	-	25000	-
Cl-7.1(Dimensions (width))	-	25000	-
Cl-7.3(Edge Straightness)	-	25000	-

19 Jun, 2028

-
Included w.e.f.08.09.2025

IS 2202 : Part 2 (2022)

WOODEN FLUSH DOOR SHUTTERS SOLID CORE TYPE SPECIFICATION PART 2 PARTICLE BOARD HIGH DENSITY FIBRE BOARD MEDIUM DENSITY FIBRE BOARD AND HARDBOARD FACE PANELS Fourth Revision

28000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No - 6.1(Timber)	-	28000	-
Clause No -6.2(Alternative Materials (LVL)	-	28000	-
Clause No -6.2(Alternative Materials veneer laminated lumber (VLL))	-	28000	-
Clause No -6.2(Alternative Materials medium density fibre board (MDF))	-	28000	-
Clause No -6.2(Alternative Materials -plywood)	-	28000	-
Clause No -6.2(BWP grade flush door shutter)	-	28000	-
Clause No -6.3.1("Face Panels: Particle Board MDF/ HDF Fibre Hardboard")	-	28000	-
Clause No -6.4(Adhesive)	-	28000	-
Clause No -7.1(Construction)	-	28000	-
Clause No - 7.3(" MDF board or HDF board ")	-	28000	-
Clause No -9.2("Workmanship and finish")	-	28000	-
Clause No -10.1(tests for flush door shutters)	-	28000	-
Clause No -10.2(End Immersion Test)	-	27999.96	-
Clause No -10.3(Glue Adhesion Test)	-	28000	-
Clause No -11(SAMPLING AND CRITERIA FOR CONFORMITY)	-	28000	-
Clause No -12("ADDITIONAL REQUIREMENTS FOR ECO MARK")	-	28000	-
5(SIZES AND TOLERANCES)	-	28000	-
6.5(The swelling in thickness of the particle board, MDF and HDF board for core)	-	28000	-
Cl-6.3.3 (Amendment NO 1)(B D P V, P D P V and M D P V types of flush door)	-	28000	-
Cl-6.3.2(MDF board and HDF board)	-	28000	-
Cl-6.3.4(B N P V, P N P V and M N P V,)	-	28000	-
Cl-7.2(Face Panel)	-	28000	-
Cl-7.4 (Amendment No 1)(Door Blanks)	-	28000	-
Cl-8(Fittings)	-	28000	-
Clause No - 6.1(Timber)	-	27999.99	-
Clause No -6.2(Alternative Materials (LVL)	-	27999.98	-
Clause No -6.2(Alternative Materials veneer laminated lumber (VLL))	-	27999.98	-
Clause No -6.2(Alternative Materials medium density fibre board (MDF))	-	27999.97	-
Clause No -6.2(Alternative Materials -plywood)	-	27999.99	-
Clause No -6.2(BWP grade flush door shutter)	-	27999.98	-
Clause No -6.3.1("Face Panels: Particle Board MDF/ HDF Fibre Hardboard")	-	27999.98	-
Clause No -6.4(Adhesive)	-	27999.97	-
Clause No -7.1(Construction)	-	27999.98	-
Clause No - 7.3(" MDF board or HDF board ")	-	28000	-
Clause No -9.2("Workmanship and finish")	-	27999.99	-
Clause No -10.1(tests for flush door shutters)	-	27999.99	-
Clause No -10.2(End Immersion Test)	-	27999.99	-
Clause No -10.3(Glue Adhesion Test)	-	27999.98	-
Clause No -11(SAMPLING AND CRITERIA FOR CONFORMITY)	-	27999.97	-
Clause No -12("ADDITIONAL REQUIREMENTS FOR ECO MARK")	-	28000.03	-
5(SIZES AND TOLERANCES)	-	27999.98	-
6.5(The swelling in thickness of the particle board, MDF and HDF board for core)	-	27999.98	-
Cl-6.3.3 (Amendment NO 1)(B D P V, P D P V and M D P V types of flush door)	-	27999.98	-
Cl-6.3.2(MDF board and HDF board)	-	27999.98	-
Cl-6.3.4(B N P V, P N P V and M N P V,)	-	27999.96	-
Cl-7.2(Face Panel)	-	28000.02	-
Cl-7.4 (Amendment No 1)(Door Blanks)	-	27999.97	-
Cl-8(Fittings)	-	28000	-
Clause No - 6.1(Timber)	-	28000	-
Clause No -6.2(Alternative Materials (LVL)	-	28000	-
Clause No -6.2(Alternative Materials veneer laminated lumber (VLL))	-	28000	-
Clause No -6.2(Alternative Materials medium density fibre board (MDF))	-	28000	-
Clause No -6.2(Alternative Materials -plywood)	-	28000	-
Clause No -6.2(BWP grade flush door shutter)	-	28000	-
Clause No -6.3.1("Face Panels: Particle Board MDF/ HDF Fibre Hardboard")	-	28000	-
Clause No -6.4(Adhesive)	-	28000	-
Clause No -7.1(Construction)	-	28000	-
Clause No - 7.3(" MDF board or HDF board ")	-	28000	-
Clause No -9.2("Workmanship and finish")	-	28000	-
Clause No -10.1(tests for flush door shutters)	-	28000	-
Clause No -10.2(End Immersion Test)	-	28000	-
Clause No -10.3(Glue Adhesion Test)	-	28000	-
Clause No -11(SAMPLING AND CRITERIA FOR CONFORMITY)	-	28000	-
Clause No -12("ADDITIONAL REQUIREMENTS FOR ECO MARK")	-	28000	-
5(SIZES AND TOLERANCES)	-	28000	-
6.5(The swelling in thickness of the particle board, MDF and HDF board for core)	-	28000	-
Cl-6.3.3 (Amendment NO 1)(B D P V, P D P V and M D P V types of flush door)	-	28000	-
Cl-6.3.2(MDF board and HDF board)	-	28000	-
Cl-6.3.4(B N P V, P N P V and M N P V,)	-	28000	-
Cl-7.2(Face Panel)	-	28000	-
Cl-7.4 (Amendment No 1)(Door Blanks)	-	28000	-
Cl-8(Fittings)	-	28000	-

19 Jun, 2028

-
Included w.e.f.08.09.2025

IS 2202 : Part 1 (2023)

WOODEN FLUSH DOOR SHUTTERS SOLID CORE TYPE SPECIFICATION PART 1 PLYWOOD FACE PANELS Seventh Revision

28000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.1(Workmanship & Finish)	-	28000	-
9.2(Workmanship & Finish)	-	28000	-
9.3(Workmanship & Finish)	-	27999.98	-
11.1(Dimensions - Height)	-	28000	-
11.1(Dimensions - Width)	-	28000	-
11.1(Dimensions - Thickness)	-	28000	-
11.1(Dimensions - Variation in thickness)	-	28000	-
11.1(Dimensions - Squareness)	-	28000	-
11.12(End immersion test)	-	28000	-
11.13(Knife Test)	-	27999.97	-
11.14(Glue Adhesion Test)	-	27999.98	-
4(GRADE)	-	27999.98	-
4(TYPE)	-	27999.98	-
5(SIZES)	-	27999.98	-
7.1.1(CONSTRUCTION-Blockboard Core)	-	28000	-
7.1.1(CONSTRUCTION-Blockboard Core)	-	27999.98	-
7.1.2(CONSTRUCTION-Blockboard Core)	-	27999.98	-
7.3.2(CONSTRUCTION-Stiles and Rails)	-	27999.98	-
7.3.2(a)(CONSTRUCTION-Stiles and Rails-Joints)	-	27999.98	-
7.3.2(b)(CONSTRUCTION-Stiles and Rails-Joints)	-	27999.98	-
7.3.2(c)(CONSTRUCTION-Stiles and Rails-Joints)	-	27999.96	-
7.3.3(CONSTRUCTION-Stiles and Rails)	-	27999.97	-
9.1(WORKMANSHIP AND FINISH)	-	27999.98	-
9.2(WORKMANSHIP AND FINISH)	-	27999.98	-
9.3(WORKMANSHIP AND FINISH)	-	27999.97	-
11.1(Dimensions and Squareness Test)	-	27999.99	-
11.1(Dimensions and Squareness Test)	-	27999.98	-
11.1(Dimensions and Squareness Test)	-	27999.99	-
11.1(Dimensions and Squareness Test)	-	27999.98	-
11.1(Dimensions and Squareness Test)	-	27999.97	-
11.2(General Flatness Test)	-	27999.99	-
11.2(General Flatness Test)	-	27999.98	-
11.2(General Flatness Test)	-	27999.97	-
11.3(Local Planeness Test)	-	27999.99	-
11.4(Impact Indentation Test)	-	27999.99	-
11.4(Impact Indentation Test)	-	27999.98	-
11.5(Flexure Test)	-	27999.99	-
11.5(Flexure Test)	-	27999.98	-
11.6(Edge Loading Test)	-	27999.98	-
11.6(Edge Loading Test)	-	27999.99	-
11.6(Edge Loading Test)	-	27999.98	-
11.6(Edge Loading Test)	-	27999.97	-
11.7.1(Shock Resistance Test)	-	27999.98	-
11.7.2(Shock Resistance Test)	-	27999.97	-
11.8(Buckling Test)	-	27999.98	-
11.8(Buckling Test)	-	27999.98	-
11.8(Buckling Test)	-	28000	-
11.9.2(Slamming Test)	-	28000	-
11.9.3(Slamming Test)	-	27999.98	-
11.10(Misuse Test)	-	27999.98	-
11.11(Varying Humidity Test)	-	27999.98	-
11.11(Varying Humidity Test)	-	27999.98	-
11.12(End Immersion Test)	-	27999.98	-
11.13(Knife Test)	-	27999.99	-
11.14(Glue Adhesion Test)	-	27999.98	-
11.15(Screw Withdrawal Resistance Test)	-	27999.98	-
11.15(Screw Withdrawal Resistance Test)	-	27999.98	-
Clause 4.2(grades specified)	-	27999.98	-
Clause 5(SIZES)	-	27999.98	-
Clause 6.1.1(species of timber)	-	27999.99	-
Clause 6.1.2(list of species)	-	27999.99	-
Clause 6.1.3(moisture content)	-	27999.98	-
Clause 6.2.1(Plywood)	-	27999.98	-
Clause 6.2.2(Decorative plywood)	-	27999.99	-
Clause 6.3(Cross-Bands)	-	27999.98	-
Clause 6.4.1(Commercial Face Veneers)	-	27999.97	-
Clause 6.4.2(Decorative Face Veneers)	-	27999.99	-
Clause 6.6.1(Adhesives)	-	27999.97	-
Clause 6.7(Particle Board)	-	27999.99	-
Clause 6.8(Medium density fibre board)	-	27999.98	-
Clause 6.9(Alternative Materials)	-	27999.98	-
Clause 7.1(Blockboard Core)	-	27999.98	-
Clause 7.2(Particle Board or Medium Density Fibre)	-	27999.98	-
Clause 7.3(Stiles and Rails)	-	27999.98	-
Clause 7.4(Levelling)	-	28000.02	-
Clause 7.5(Face Panel)	-	27999.99	-
Clause 7.6(Lipping)	-	27999.98	-
Clause 7.7(Rebating)	-	27999.98	-
Clause 7.8(Opening for Glazing)	-	27999.99	-
Clause 7.9(Venetian)	-	27999.98	-
Clause 8.1(Locks)	-	27999.98	-
Clause 9(WORKMANSHIP AND FINISH)	-	27999.99	-
Clause 10.1(Classification of Tests)	-	28000.03	-
Clause 11.1(Dimensions and Squareness Test)	-	27999.98	-
Clause 11.2(General Flatness Test)	-	27999.98	-
Clause 11.3(Local Planeness Test)	-	27999.98	-
Clause 11.4(Impact Indentation Test)	-	27999.98	-
Clause 11.5(Flexure Test)	-	27999.97	-
Clause 11.6(Edge Loading Test)	-	28000	-
Clause 11.7(Shock Resistance Test)	-	27999.97	-
Clause 11.8(Buckling Resistance Test)	-	28000	-
Clause 11.9(Slamming Test)	-	27999.98	-
Clause 11.10(Misuse Test)	-	27999.97	-
Clause 11.11(Varying Humidity Test)	-	27999.98	-
Clause 11.12(End Immersion Test)	-	27999.98	-
Clause 11.13(Knife Test)	-	27999.98	-
Clause 11.14(Glue Adhesion Test)	-	27999.97	-
Clause 11.15(Screw Withdrawal Resistance Test)	-	27999.97	-
Clause 12(SAMPLING AND CRITERIA FOR CONFORMITY)	-	27999.98	-
Clause 13(ADDITIONAL REQUIREMENTS FOR ECO MARK)	-	27999.99	-
Clause 14(Marking)	-	27999.98	-
4(Grade, Type and Construction)	-	27999.97	-
5(Sizes and Thickness)	-	27999.97	-
6.1(Timber)	-	27999.97	-
6.2(Plywood for flush door shutter)	-	27999.98	-
6.3(Cross-Bands )	-	27999.98	-
6.4.1(Commercial Face Veneers)	-	27999.99	-
6.4.2(Decorative face veneers)	-	27999.99	-
6.6(Adhesives)	-	27999.97	-
6.7(Particle Board)	-	27999.98	-
6.8(Medium Density Fibre)	-	27999.98	-
6.9(Alternative Materials)	-	27999.98	-
7(Construction)	-	27999.98	-
8.1(Locks)	-	27999.97	-
8.2(Other Fittings)	-	28000	-
9(Workmanship and Finish)	-	27999.98	-
10(Tests)	-	27999.98	-
11.1(Dimensions and Squareness Test)	-	27999.99	-
11.2(General Flatness Test)	-	27999.99	-
11.3(Local Planeness Test)	-	27999.99	-
11.4(Impact Indentation Test)	-	27999.99	-
11.5(Flexure Test)	-	27999.98	-
11.6(Edge Loading Test)	-	27999.97	-
11.7(Shock Resistance Test)	-	27999.99	-
11.8(Buckling Resistance Test)	-	27999.99	-
11.9(Slamming Test)	-	27999.97	-
11.1(Misuse Test)	-	27999.98	-
11.11(Varying Humidity Test)	-	27999.97	-
11.12(End Immersion Test)	-	28000	-
11.13(Knife Test)	-	27999.98	-
11.14(Glue Adhesion Test)	-	27999.99	-
11.15(Screw Withdrawal Resistance Test)	-	27999.99	-
14(Marking )	-	27999.98	-
Cl-13(ADDITIONAL REQUIREMENTS FOR ECO MARK)	-	27999.97	-
9.1(Workmanship & Finish)	-	28000	-
9.2(Workmanship & Finish)	-	28000	-
9.3(Workmanship & Finish)	-	28000	-
11.1(Dimensions - Height)	-	28000	-
11.1(Dimensions - Width)	-	28000	-
11.1(Dimensions - Thickness)	-	28000	-
11.1(Dimensions - Variation in thickness)	-	28000	-
11.1(Dimensions - Squareness)	-	28000	-
11.12(End immersion test)	-	28000	-
11.13(Knife Test)	-	28000	-
11.14(Glue Adhesion Test)	-	28000	-
4(GRADE)	-	28000	-
4(TYPE)	-	28000	-
5(SIZES)	-	28000	-
7.1.1(CONSTRUCTION-Blockboard Core)	-	28000	-
7.1.1(CONSTRUCTION-Blockboard Core)	-	28000	-
7.1.2(CONSTRUCTION-Blockboard Core)	-	28000	-
7.3.2(CONSTRUCTION-Stiles and Rails)	-	28000	-
7.3.2(a)(CONSTRUCTION-Stiles and Rails-Joints)	-	28000	-
7.3.2(b)(CONSTRUCTION-Stiles and Rails-Joints)	-	28000	-
7.3.2(c)(CONSTRUCTION-Stiles and Rails-Joints)	-	28000	-
7.3.3(CONSTRUCTION-Stiles and Rails)	-	28000	-
9.1(WORKMANSHIP AND FINISH)	-	28000	-
9.2(WORKMANSHIP AND FINISH)	-	28000	-
9.3(WORKMANSHIP AND FINISH)	-	28000	-
11.1(Dimensions and Squareness Test)	-	28000	-
11.1(Dimensions and Squareness Test)	-	28000	-
11.1(Dimensions and Squareness Test)	-	28000	-
11.1(Dimensions and Squareness Test)	-	28000	-
11.1(Dimensions and Squareness Test)	-	28000	-
11.2(General Flatness Test)	-	28000	-
11.2(General Flatness Test)	-	28000	-
11.2(General Flatness Test)	-	28000	-
11.3(Local Planeness Test)	-	28000	-
11.4(Impact Indentation Test)	-	28000	-
11.4(Impact Indentation Test)	-	28000	-
11.5(Flexure Test)	-	28000	-
11.5(Flexure Test)	-	28000	-
11.6(Edge Loading Test)	-	28000	-
11.6(Edge Loading Test)	-	28000	-
11.6(Edge Loading Test)	-	28000	-
11.6(Edge Loading Test)	-	28000	-
11.7.1(Shock Resistance Test)	-	28000	-
11.7.2(Shock Resistance Test)	-	28000	-
11.8(Buckling Test)	-	28000	-
11.8(Buckling Test)	-	28000	-
11.8(Buckling Test)	-	28000	-
11.9.2(Slamming Test)	-	28000	-
11.9.3(Slamming Test)	-	28000	-
11.10(Misuse Test)	-	28000	-
11.11(Varying Humidity Test)	-	28000	-
11.11(Varying Humidity Test)	-	28000	-
11.12(End Immersion Test)	-	28000	-
11.13(Knife Test)	-	28000	-
11.14(Glue Adhesion Test)	-	28000	-
11.15(Screw Withdrawal Resistance Test)	-	28000	-
11.15(Screw Withdrawal Resistance Test)	-	28000	-
Clause 4.2(grades specified)	-	28000	-
Clause 5(SIZES)	-	28000	-
Clause 6.1.1(species of timber)	-	28000	-
Clause 6.1.2(list of species)	-	28000	-
Clause 6.1.3(moisture content)	-	28000	-
Clause 6.2.1(Plywood)	-	28000	-
Clause 6.2.2(Decorative plywood)	-	28000	-
Clause 6.3(Cross-Bands)	-	28000	-
Clause 6.4.1(Commercial Face Veneers)	-	28000	-
Clause 6.4.2(Decorative Face Veneers)	-	28000	-
Clause 6.6.1(Adhesives)	-	28000	-
Clause 6.7(Particle Board)	-	28000	-
Clause 6.8(Medium density fibre board)	-	28000	-
Clause 6.9(Alternative Materials)	-	28000	-
Clause 7.1(Blockboard Core)	-	28000	-
Clause 7.2(Particle Board or Medium Density Fibre)	-	28000	-
Clause 7.3(Stiles and Rails)	-	28000	-
Clause 7.4(Levelling)	-	28000	-
Clause 7.5(Face Panel)	-	28000	-
Clause 7.6(Lipping)	-	28000	-
Clause 7.7(Rebating)	-	28000	-
Clause 7.8(Opening for Glazing)	-	28000	-
Clause 7.9(Venetian)	-	28000	-
Clause 8.1(Locks)	-	28000	-
Clause 9(WORKMANSHIP AND FINISH)	-	28000	-
Clause 10.1(Classification of Tests)	-	28000	-
Clause 11.1(Dimensions and Squareness Test)	-	28000	-
Clause 11.2(General Flatness Test)	-	28000	-
Clause 11.3(Local Planeness Test)	-	28000	-
Clause 11.4(Impact Indentation Test)	-	28000	-
Clause 11.5(Flexure Test)	-	28000	-
Clause 11.6(Edge Loading Test)	-	28000	-
Clause 11.7(Shock Resistance Test)	-	28000	-
Clause 11.8(Buckling Resistance Test)	-	28000	-
Clause 11.9(Slamming Test)	-	28000	-
Clause 11.10(Misuse Test)	-	28000	-
Clause 11.11(Varying Humidity Test)	-	28000	-
Clause 11.12(End Immersion Test)	-	28000	-
Clause 11.13(Knife Test)	-	28000	-
Clause 11.14(Glue Adhesion Test)	-	28000	-
Clause 11.15(Screw Withdrawal Resistance Test)	-	28000	-
Clause 12(SAMPLING AND CRITERIA FOR CONFORMITY)	-	28000	-
Clause 13(ADDITIONAL REQUIREMENTS FOR ECO MARK)	-	28000	-
Clause 14(Marking)	-	28000	-
4(Grade, Type and Construction)	-	28000	-
5(Sizes and Thickness)	-	28000	-
6.1(Timber)	-	28000	-
6.2(Plywood for flush door shutter)	-	28000	-
6.3(Cross-Bands )	-	28000	-
6.4.1(Commercial Face Veneers)	-	28000	-
6.4.2(Decorative face veneers)	-	28000	-
6.6(Adhesives)	-	28000	-
6.7(Particle Board)	-	28000	-
6.8(Medium Density Fibre)	-	28000	-
6.9(Alternative Materials)	-	28000	-
7(Construction)	-	28000	-
8.1(Locks)	-	28000	-
8.2(Other Fittings)	-	28000	-
9(Workmanship and Finish)	-	28000	-
10(Tests)	-	28000	-
11.1(Dimensions and Squareness Test)	-	28000	-
11.2(General Flatness Test)	-	28000	-
11.3(Local Planeness Test)	-	28000	-
11.4(Impact Indentation Test)	-	28000	-
11.5(Flexure Test)	-	28000	-
11.6(Edge Loading Test)	-	28000	-
11.7(Shock Resistance Test)	-	28000	-
11.8(Buckling Resistance Test)	-	28000	-
11.9(Slamming Test)	-	28000	-
11.1(Misuse Test)	-	28000	-
11.11(Varying Humidity Test)	-	28000	-
11.12(End Immersion Test)	-	28000	-
11.13(Knife Test)	-	28000	-
11.14(Glue Adhesion Test)	-	28000	-
11.15(Screw Withdrawal Resistance Test)	-	28000	-
14(Marking )	-	28000	-
Cl-13(ADDITIONAL REQUIREMENTS FOR ECO MARK)	-	28000	-

19 Jun, 2028

-
Included w.e.f.08.09.2025

IS 1659 (2004)

Block boards - Specification (Fourth Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.2.6(Spot test - Annexure L)	-	10000	-
9.2.5(Modulus of elasticity - MINIMUM INDIVIDUAL - Annexure K)	-	10000	-
9.2.5(Modulus of elasticity - AVERAGE - Annexure K)	-	10000	-
9.2.5(Modulus of rupture - MINIMUM INDIVIDUAL - Annexure K)	-	10000	-
9.2.5(Modulus of rupture - AVERAGE - Annexure K)	-	10000	-
9.2.4(Mycological Test [for MR grade only] - Annexure J)	-	10000	-
9.2.3(Adhesion of Plies - Annexure H)	-	10000	-
9.2.2 (Resistance to water - Annexure G, Annexure H [For MR Grade])	-	10000	-
9.2.2 (Resistance to water - Annexure G, Annexure H [For BWP grade])	-	10000	-
9.2.1(Dimensional Changes caused by humidity Change in local planeness - Annexure F)	-	10000	-
9.2.1(Dimensional Changes caused by humidity - Delamination - Annexure F)	-	10000	-
9.2.1(Dimensional Changes caused by humidity - Change in thickness - at 40% RH - Annexure F)	-	10000	-
9.2.1(Dimensional Changes caused by humidity - Change in Thickness - at 90% RH - Annexure F)	-	10000	-
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 40% RH - Annexure F)	-	10000	-
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 90% RH - Annexure F)	-	10000	-
7.3(Dimensional Requirements - Variation in thickness - Annexure E)	-	10000	-
7.3(Dimensional Requirements - Squareness - Annexure D)	-	10000	-
7.3(Dimensional Requirements - Edge Straightness - Annexure D)	-	10000	-
7.3(Dimensional Requirements - Thickness - Annexure E)	-	10000	-
7.3(Dimensional Requirements - Width - 8.1.4)	-	10000	-
7.3(Dimensional Requirements - Length - 8.1.4)	-	10000	-
8.1.3, 6.3.3, IS 1328(Visual Inspection - Permissible Defects - IS 1328 [test method for DECORATIVE type])	-	10000	-
8.1.3, 6.3.3, IS 303(Visual Inspection - Permissible Defects - IS 303 [test method for COMMERCIAL type])	-	10000	-
9.2.6 (mechanical)(Spot test - Annexure L)	-	10000	-
cl. 11(marking)	-	10000	-
cl. 11.1(marking - BIS certification marking)	-	10000	-
Cl-10(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	10000	-
6.2(Core- Moisture & Width)	-	10000	-
6.3(Cross Bands and Faces- Moisture content)	-	10000	-
6.3.1(Thickness of cross band and face veneers)	-	10000	-
Cl-7.1(Thickness)	-	10000	-
Cl-7.2(Sizes)	-	10000	-
9.2.6(Spot test - Annexure L)	-	10000	-
9.2.6 (mechanical)(Spot test - Annexure L)	-	10000	-
cl. 11(marking)	-	10000	-
cl. 11.1(marking - BIS certification marking)	-	10000	-
Cl-10(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	10000	-
6.2(Core- Moisture & Width)	-	10000	-
6.3(Cross Bands and Faces- Moisture content)	-	10000	-
6.3.1(Thickness of cross band and face veneers)	-	10000	-
Cl-7.1(Thickness)	-	10000	-
Cl-7.2(Sizes)	-	10000	-
9.2.6(Spot test - Annexure L)	-	10000	-
9.2.6 (mechanical)(Spot test - Annexure L)	-	10000	-
cl. 11(marking)	-	10000	-
cl. 11.1(marking - BIS certification marking)	-	10000	-
Cl-10(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	10000	-
6.2(Core- Moisture & Width)	-	10000	-
6.3(Cross Bands and Faces- Moisture content)	-	10000	-
6.3.1(Thickness of cross band and face veneers)	-	10000	-
Cl-7.1(Thickness)	-	9999.97	-
Cl-7.2(Sizes)	-	10000	-
9.2.6(Spot test - Annexure L)	-	10000	-
9.2.6 (mechanical)(Spot test - Annexure L)	-	9999.99	-
cl. 11(marking)	-	9999.99	-
cl. 11.1(marking - BIS certification marking)	-	10000	-
Cl-10(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	9999.97	-
6.2(Core- Moisture & Width)	-	9999.98	-
6.3(Cross Bands and Faces- Moisture content)	-	10000	-
6.3.1(Thickness of cross band and face veneers)	-	10000	-
Cl-7.1(Thickness)	-	9999.98	-
Cl-7.2(Sizes)	-	10000	-
9.2.6(Spot test - Annexure L)	-	10000	-
9.2.6 (mechanical)(Spot test - Annexure L)	-	9999.97	-
cl. 11(marking)	-	10000	-
cl. 11.1(marking - BIS certification marking)	-	9999.99	-
Cl-10(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	10000	-
6.2(Core- Moisture & Width)	-	10000	-
6.3(Cross Bands and Faces- Moisture content)	-	10000	-
6.3.1(Thickness of cross band and face veneers)	-	9999.99	-
Cl-7.1(Thickness)	-	10000	-
Cl-7.2(Sizes)	-	10000	-

19 Jun, 2028

-
Included w.e.f. 02.09.2025

IS 710 (2024)

MARINE PLYWOOD - SPECIFICATION (Third Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Timber)	-	15000	-
Cl-4.2(Adhesive)	-	15000	-
Cl-5.1(Veneers)	-	15000	-
Cl-5.2.1(Glueing)	-	15000	-
Cl -5.2.2(Thickness of Veneers)	-	15000	-
Cl - 5.2.3.1(Joint in Veneers)	-	15000	-
Cl - 5.2.3.2(Edge joints)	-	15000	-
Cl - 5.2.3.3(End joints)	-	15000	-
Cl - 5.2.3.4(Scarf joints)	-	15000	-
Cl - 5.2.4(Grain Direction)	-	15000	-
Cl-5.3(Treatment)	-	15000	-
Cl-5.4(Moisture Content)	-	15000	-
Cl-6.1(Dimensions (length))	-	15000	-
Cl-6.2(Thickness)	-	15000	-
Cl-6.3(Squareness)	-	15000	-
Cl-7.1, 7.2, 7.3, 7.4, 7.5 & 7.6(Workmanship and finish)	-	15000	-
Cl-9.3(Moisture Content)	-	15000	-
Cl-9.4.2(Glue Adhesion in Dry State- Adhesion of Plies)	-	15000	-
Cl-9.4.1(Glue Adhesion in Dry State- Glue Shear Strength -Average)	-	15000	-
Cl-9.5.1.1(Glue Adhesion in Water Resistance - Glue Shear Strength -Average)	-	15000	-
Cl-9.5.1.2(Water Resistance Test-Adhesion of plies)	-	15000	-
Cl-9.5.2(Water Resistance Test)	-	15000	-
Cl-9.6(Tensile Strength-Along the grain)	-	15000	-
Cl-9.7(Mycological Test -Adhesion)	-	15000	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	15000	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	15000	-
Cl-9.9, Table-3 (i) a(Wet Bending Strength- Modulus of Elasticity (MOE)- Average)	-	15000	-
Cl-9.9, Table-3 (i) b(Wet Bending Strength- Modulus of Elasticity (MOE),-Minimum individual)	-	15000	-
Cl-9.10(Retention of Preservative)	-	15000	-
Cl-9.11(Formaldehyde Content Test)	-	15000	-
Cl-9.12(Steady-State Formaldehyde Emission Test)	-	15000	-
Cl-9.4.2(Adhesion of Plies)	-	15000	-
5.1.1(Defects in veneers)	-	15000	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	15000	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	15000	-
Cl-9.9, Table-3 (ii) a(Wet Bending Strength- Modulus of Rupture (MOR)-Average)	-	15000	-
Cl-9.9, Table-3 (ii) b(Wet Bending Strength- Modulus of Rupture (MOR), -Minimum individual)	-	15000	-
Cl-6.1(Dimensions (width))	-	15000	-
Cl-8.3(Edge Straightness)	-	15000	-
Cl-9.4.1(Glue Adhesion in Dry State- Glue Shear Strength –Minimum Individual)	-	15000	-
Cl-9.5.1.1(Glue Adhesion in Water Resistance - Glue Shear Strength –Minimum Individual)	-	15000	-
Cl-9.6(Tensile Strength-Across the grain)	-	15000	-
Cl-9.7(Glue Adhesion in Mycological test - Glue Shear Strength –Minimum Individual)	-	15000	-
Cl-9.7(Glue Adhesion in Mycological test - Glue Shear Strength -Average)	-	15000	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	15000	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	15000	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	15000	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	15000	-
Cl-11.1(Marking)	-	15000	-
Cl-11.3(Marking)	-	15000	-
Cl-4.1(Timber)	-	15000	-
Cl-4.2(Adhesive)	-	15000	-
Cl-5.1(Veneers)	-	15000	-
Cl-5.2.1(Glueing)	-	14999.97	-
Cl -5.2.2(Thickness of Veneers)	-	15000	-
Cl - 5.2.3.1(Joint in Veneers)	-	14999.97	-
Cl - 5.2.3.2(Edge joints)	-	15000	-
Cl - 5.2.3.3(End joints)	-	14999.95	-
Cl - 5.2.3.4(Scarf joints)	-	15000	-
Cl - 5.2.4(Grain Direction)	-	15000	-
Cl-5.3(Treatment)	-	15000	-
Cl-5.4(Moisture Content)	-	14999.98	-
Cl-6.1(Dimensions (length))	-	15000	-
Cl-6.2(Thickness)	-	15000	-
Cl-6.3(Squareness)	-	15000	-
Cl-7.1, 7.2, 7.3, 7.4, 7.5 & 7.6(Workmanship and finish)	-	15000	-
Cl-9.3(Moisture Content)	-	15000	-
Cl-9.4.2(Glue Adhesion in Dry State- Adhesion of Plies)	-	15000	-
Cl-9.4.1(Glue Adhesion in Dry State- Glue Shear Strength -Average)	-	15000	-
Cl-9.5.1.1(Glue Adhesion in Water Resistance - Glue Shear Strength -Average)	-	15000	-
Cl-9.5.1.2(Water Resistance Test-Adhesion of plies)	-	15000	-
Cl-9.5.2(Water Resistance Test)	-	15000	-
Cl-9.6(Tensile Strength-Along the grain)	-	15000	-
Cl-9.7(Mycological Test -Adhesion)	-	15000	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	15000	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	15000	-
Cl-9.9, Table-3 (i) a(Wet Bending Strength- Modulus of Elasticity (MOE)- Average)	-	15000	-
Cl-9.9, Table-3 (i) b(Wet Bending Strength- Modulus of Elasticity (MOE),-Minimum individual)	-	15000	-
Cl-9.10(Retention of Preservative)	-	15000	-
Cl-9.11(Formaldehyde Content Test)	-	15000	-
Cl-9.12(Steady-State Formaldehyde Emission Test)	-	15000	-
Cl-9.4.2(Adhesion of Plies)	-	15000	-
5.1.1(Defects in veneers)	-	15000	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	15000	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	15000	-
Cl-9.9, Table-3 (ii) a(Wet Bending Strength- Modulus of Rupture (MOR)-Average)	-	15000	-
Cl-9.9, Table-3 (ii) b(Wet Bending Strength- Modulus of Rupture (MOR), -Minimum individual)	-	15000	-
Cl-6.1(Dimensions (width))	-	15000	-
Cl-8.3(Edge Straightness)	-	15000	-
Cl-9.4.1(Glue Adhesion in Dry State- Glue Shear Strength –Minimum Individual)	-	15000	-
Cl-9.5.1.1(Glue Adhesion in Water Resistance - Glue Shear Strength –Minimum Individual)	-	15000	-
Cl-9.6(Tensile Strength-Across the grain)	-	15000	-
Cl-9.7(Glue Adhesion in Mycological test - Glue Shear Strength –Minimum Individual)	-	15000	-
Cl-9.7(Glue Adhesion in Mycological test - Glue Shear Strength -Average)	-	15000	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	15000	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	15000	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	15000	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	15000	-
Cl-11.1(Marking)	-	15000	-
Cl-11.3(Marking)	-	15000	-

19 Jun, 2028

-
Included w.e.f. 02.09.2025

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification by appearance)	-	15000	-
Cl-5.2, Table- 1 (i)(Blister)	-	15000	-
Cl-5.2, Table- 1 (ii)(Checks)	-	15000	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	15000	-
Cl-5.2, Table- 1 (iv)(Dote)	-	14999.99	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	15000	-
Cl-5.2, Table- 1 (vi)(Joints)	-	15000	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	15000	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	15000	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	15000	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	15000	-
Cl-5.2, Table- 1 (xi)(Patches)	-	15000	-
Cl-5.2, Table- 1 (xii)(Splits)	-	15000	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	15000	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	15000	-
Cl-6.1(Timber)	-	15000	-
Cl-6.2(Adhesive)	-	15000	-
Cl-7.2.1(Thickness of veneers)	-	15000	-
Cl-7.2.3(Grain Direction)	-	15000	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	15000	-
Cl-7.2.5.2(Splits)	-	15000	-
Cl-7.2.5.3(Overlap)	-	15000	-
Cl-8.1(Dimensions -length)	-	15000	-
Cl-8.2(Thickness of the plywood boards)	-	15000	-
Cl-8.3(Squareness)	-	15000	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	15000	-
Cl-11.3.2(Mycological Test)	-	15000	-
Cl-11.4(Moisture Content)	-	15000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	15000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	15000	-
Cl-11.6(Formaldehyde Content Test)	-	15000	-
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	15000	-
Cl-9(WORKMANSHIP AND FINISH)	-	15000	-
Cl-7.2.4(Scarf Joints)	-	15000	-
Cl. 4(Grades)	-	15000	-
Cl.5.1(Type based on classification by appearance)	-	15000	-
Cl.5.2(Quality Requirements of Plywood for General Purposes)	-	15000	-
Cl.8.1(Dimensions -width)	-	15000	-
Cl.8, 8.3 & Annex C(Edge Straightness)	-	15000	-
Cl.8, 8.3 & Annex C(Edge Squareness)	-	15000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	15000	-
Cl-11.5, Table-4,(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	15000	-
Cl-8.3(Edge Straightness)	-	15000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	15000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	15000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	15000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	15000	-
Cl-13(Marking)	-	15000	-
Cl-5.1(Classification by appearance)	-	15000	-
Cl-5.2, Table- 1 (i)(Blister)	-	15000	-
Cl-5.2, Table- 1 (ii)(Checks)	-	15000	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	15000	-
Cl-5.2, Table- 1 (iv)(Dote)	-	15000	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	14999.96	-
Cl-5.2, Table- 1 (vi)(Joints)	-	15000	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	14999.97	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	15000	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	15000	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	15000	-
Cl-5.2, Table- 1 (xi)(Patches)	-	15000	-
Cl-5.2, Table- 1 (xii)(Splits)	-	15000	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	15000	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	15000	-
Cl-6.1(Timber)	-	15000	-
Cl-6.2(Adhesive)	-	15000	-
Cl-7.2.1(Thickness of veneers)	-	15000	-
Cl-7.2.3(Grain Direction)	-	15000	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	15000	-
Cl-7.2.5.2(Splits)	-	15000	-
Cl-7.2.5.3(Overlap)	-	15000	-
Cl-8.1(Dimensions -length)	-	15000	-
Cl-8.2(Thickness of the plywood boards)	-	15000	-
Cl-8.3(Squareness)	-	15000	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	15000	-
Cl-11.3.2(Mycological Test)	-	15000	-
Cl-11.4(Moisture Content)	-	15000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	15000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	15000	-
Cl-11.6(Formaldehyde Content Test)	-	15000	-
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	15000	-
Cl-9(WORKMANSHIP AND FINISH)	-	15000	-
Cl-7.2.4(Scarf Joints)	-	15000	-
Cl. 4(Grades)	-	15000	-
Cl.5.1(Type based on classification by appearance)	-	15000	-
Cl.5.2(Quality Requirements of Plywood for General Purposes)	-	15000	-
Cl.8.1(Dimensions -width)	-	15000	-
Cl.8, 8.3 & Annex C(Edge Straightness)	-	15000	-
Cl.8, 8.3 & Annex C(Edge Squareness)	-	15000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	15000	-
Cl-11.5, Table-4,(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	15000	-
Cl-8.3(Edge Straightness)	-	15000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	15000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	15000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	15000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	15000	-
Cl-13(Marking)	-	15000	-
Cl-5.1(Classification by appearance)	-	15000	-
Cl-5.2, Table- 1 (i)(Blister)	-	15000	-
Cl-5.2, Table- 1 (ii)(Checks)	-	14999.98	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	15000	-
Cl-5.2, Table- 1 (iv)(Dote)	-	14999.98	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	15000	-
Cl-5.2, Table- 1 (vi)(Joints)	-	15000	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	15000	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	15000	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	15000	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	14999.99	-
Cl-5.2, Table- 1 (xi)(Patches)	-	14999.98	-
Cl-5.2, Table- 1 (xii)(Splits)	-	14999.99	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	14999.99	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	15000	-
Cl-6.1(Timber)	-	15000	-
Cl-6.2(Adhesive)	-	15000	-
Cl-7.2.1(Thickness of veneers)	-	14999.98	-
Cl-7.2.3(Grain Direction)	-	14999.99	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	14999.97	-
Cl-7.2.5.2(Splits)	-	14999.98	-
Cl-7.2.5.3(Overlap)	-	14999.98	-
Cl-8.1(Dimensions -length)	-	14999.98	-
Cl-8.2(Thickness of the plywood boards)	-	14999.98	-
Cl-8.3(Squareness)	-	14999.97	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	14999.97	-
Cl-11.3.2(Mycological Test)	-	14999.98	-
Cl-11.4(Moisture Content)	-	14999.97	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	14999.98	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	14999.97	-
Cl-11.6(Formaldehyde Content Test)	-	14999.98	-
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	14999.97	-
Cl-9(WORKMANSHIP AND FINISH)	-	14999.98	-
Cl-7.2.4(Scarf Joints)	-	14999.98	-
Cl. 4(Grades)	-	14999.98	-
Cl.5.1(Type based on classification by appearance)	-	14999.98	-
Cl.5.2(Quality Requirements of Plywood for General Purposes)	-	15000	-
Cl.8.1(Dimensions -width)	-	14999.96	-
Cl.8, 8.3 & Annex C(Edge Straightness)	-	14999.97	-
Cl.8, 8.3 & Annex C(Edge Squareness)	-	15000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	15000	-
Cl-11.5, Table-4,(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	15000	-
Cl-8.3(Edge Straightness)	-	15000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	14999.97	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	15000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	15000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	14999.98	-
Cl-13(Marking)	-	15000	-

19 Jun, 2028

-
Included w.e.f. 02.09.2025

IS 14261 (1995)

Transmission devices - V - Belts endless narrowv - Belts for industrial use - Specification

ALL

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4(Material And Workmanship)	-	35000	-
Cl 5.1(Cross-Section Dimensions)	-	35000	-
Cl 5.2(Cross-Section Dimensions)	-	35000	-
Cl 6(DESIGNATION)	-	35000	-
Cl 7(Length Measurement And Tolerances)	-	35000	-
Cl 7.2.1(Determination of Pitch Length)	-	35000	-
Cl 7.2.2(Determination of Pitch Length)	-	35000	-
Cl 7.2.3(Determination of Pitch Length)	-	35000	-
Cl 7.3(Matched Belts)	-	35000	-

19 Jun, 2028

-
Included w.e.f.28.08.2025

IS 2494 : Part 2 (1993)

V - Belts - Endless V - Belts for industrial purposes: Part 2 fire resistant and antistatic V - Belts - Specification

ALL

35400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Fire Resistant Antistatic V-belts)	-	35400	-
3.2(Antistatic V-belts)	-	35400	-
5(Requirements)	-	35400	-
7.1(Fire Resistance Test)	-	35400	-
7.2(Electrical Resistance Test)	-	35400	-
7.3(Tensile Test)	-	35400	-
8(Designation)	-	35400	-
9(Marking)	-	35400	-

19 Jun, 2028

-
Included w.e.f.26.08.2025

Bureau of Indian Standards

The National Standards Body of India

Atckon Laboratories LLP, Bahadurgarh

Plot NO. 45, Part A M.I.E, Bahadurgarh, Jhajjar, Haryana, Bahadurgarh, Jhajjar, Haryana, 124507

8570906101 info@atckonlabs.com

Scope List