BIS - LIMS (Laboratory Information Management System)

Advance Firetec and Research Lab Pvt. Ltd.

B-3, Mangolpuri, Industrial Area Phase II, NEW DELHI, North West, Delhi, 110034

9971032375 aftrlab@gmail.com

Scope List

Reset

35 Results

S.No.

Indian Standard No.

Product

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 8090 (1976)

Specification for couplings, branch pipe, nozzle used in hose reel tubing for fire fighting

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Tolerances)	-	0	-
4(Workmanship and Finish)	-	1000	-
5.1(Construction)	-	1000	-
5.3(Hydraulic test requirement)	-	3000	-
6.1(Dimensions)	-	1000	-
6.2(Construction)	-	1000	-
6.3(Hydraulic test requirement)	-	3000	-
7.1(Dimensions)	-	1000	-
7.2(Construction)	-	1000	-
7.3(Hydraulic requirement test)	-	3000	-
9(Marking)	-	0	-

Complete

01 Jul, 2024

IS 5612 : Part 2 (1977)

Specification for hose - Clamps and hose - Bandages for fire brigade use: Part 2 hose - Bandages (First Revision)

- View breakup
(Provisional testing charges): Rs.5,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

01 Jul, 2024

Except clause 3 (materials)

IS 4989 : Part 4 (2003)

Multipurpose aqueous film forming foam liquid concentrate for extinguishing hydrocarbon and polar solvent fires - Specification

- View breakup
(Provisional testing charges): Rs.57,600/

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

01 Jul, 2024

IS 15381 (2021)

Fire Blanket - Specification ( First Revision )

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4.1( Construction)	-	500	NA
4.2(Hand Holding Device)	-	500	NA
4.3(Shape & Dimension)	-	800	NA
4.4(Mass)	-	500	NA
4.5(Deformation)	-	500	NA
4.6(Force and Time for removing & unfolding)	-	800	NA
5(Electrical Resistance)	-	3500	NA
6.1 & 6.2(Fire Performance)	-	12900	Rs 8000.00 (Cooking Oil) + Rs 4900.00 (Hydrocarbon Fuel)
6.3(Temperature Resistance)	-	3500	NA
7(Workmanship and Finish)	-	500	NA
9,9.1 &9.2(Marking)	-	500	NA

Complete

01 Jul, 2024

IS 952 (2012)

Fog nozzle for fire brigade use - Specification (Second Revision)

- View breakup
(Provisional testing charges): Rs.10,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

01 Jul, 2024

IS 908 (1975)

Specification for fire hydrant, stand post type (Second Revision)

- View breakup
For BIS Samples: 1.5 times of BIS Testing Charges. For Others: Rs.15,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

01 Jul, 2024

Except clause 3 (materials)

IS 905 (1980)

Specification for delivery breechings, dividing and collecting, instantaneous pattern, for fire fighting purposes (Second Revision)

- View breakup
(Provisional testing charges): Rs.5,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

01 Jul, 2024

Except clause 3 (materials)

IS 910 (1980)

Specification for combined key for hydrant, hydrant cover and lower valve (Second Revision)

- View breakup
(Provisional testing charges): Rs.15,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

01 Jul, 2024

IS 927 (1981)

Specification for fire hooks (Second Revision)

- View breakup
(Provisional testing charges): Rs.8,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

01 Jul, 2024

IS 5714 (1981)

Specification for hydrant stand - Pipe for fire fighting (First Revision)

- View breakup
(Provisional testing charges): Rs.10,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

01 Jul, 2024

Except clause 3 to 3.5 (materials)

IS 904 (1983)

Specification for 2 - Way and 4 - Way suction collecting heads for fire fighting purposes

- View breakup
(Provisional testing charges): Rs.5,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

01 Jul, 2024

Except clause 2 (materials)

IS 4861 (1984)

Specification for Dry Powder for Fighting Fires in Burning Metals

- View breakup
For BIS Samples: 1.5 times of BIS Testing Charges. For Others: Rs.20,000/

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

01 Jul, 2024

Except fire test on radioactive materials

IS 926 (1985)

Specification For Fireman's Axe

- View breakup
(Provisional testing charges): Rs.5,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

01 Jul, 2024

Except clause 3 (materials)

IS 901 (1988)

Specification for couplings, double male and double female instantaneous pattern for fire fighting (Third Revision)

- View breakup
(Provisional testing charges): Rs.5,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

01 Jul, 2024

Except clause 2 (materials)

IS 906 (1988)

Specification for revolving branch pipe for fire fighting (Third Revision)

- View breakup
(Provisional testing charges): Rs.10,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

01 Jul, 2024

Except clause 3 (materials)

IS 902 (1992)

Suction hose couplings for fire fighting purposes - Specification (Third Revision)

- View breakup
(Provisional testing charges): Rs.7000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

01 Jul, 2024

Except clause 3 (materials)

IS 909 (1992)

Underground fire hydrant, sluice valve type - Specification (Third Revision)

- View breakup
For BIS Samples: 1.5 times of BIS Testing Charges. For Others: Rs.15,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

01 Jul, 2024

IS 4927 (1992)

Unlined flax canvas hose for fire fighting - Specification (First Revision)

- View breakup
For BIS Samples: 1.5 times of BIS Testing Charges. For Others: Rs.20,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

01 Jul, 2024

IS 8096 (1992)

Fire beaters - Specification (First Revision)

- View breakup
(Provisional testing charges): Rs.10,000/

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

01 Jul, 2024

IS 14609 (1999)

Dry chemical powder for fighting a,b,c, class fires specification

- View breakup
For BIS Samples: 1.5 times of BIS Testing Charges. For Others: Rs.25,200/

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

01 Jul, 2024

IS 903 (1993)

Specification for Fire Hose Delivery Couplings, Branch Pipe, Nozzles And Nozzle Spanner - Specificaion

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Finish and workmanship)	-	4000	NA
4(Marking)	-	2000	NA
5(Delivery hose coupling)	-	4000	NA
5.3(Size and Dimension )	-	4000	NA
5.4(Hydraulic test requirement)	-	6000	NA
6(Branch pipe)	-	4000	NA
6.3(Hydraulic test requirement)	-	6000	NA
7(Nozzle)	-	4000	NA
7.3(Hydraulic test requirement)	-	6000	Test for nozzle spanner are carried out and present in NABL Scope Sl No. 263, 268.

Complete

01 Jul, 2024

IS 16018 (2012)

Wheeled fire extinguishers - Performance and construction - Specification

200500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4(Types of Wheeled Fire Extinguishers)	-	500	NA
Cl 5.3(Fill Density)	-	600	NA
Cl 5.4(Filling Tolerance)	-	600	NA
Cl 5.5.1(Nominal Charge)	-	500	NA
Cl 6.1(Operating Temperature)	-	500	NA
Cl 6.2.1(Effective Discharge Time)	-	600	NA
Cl 6.2.2(Bulk Range)	-	600	NA
Cl 6.3(Resistance To Temperature Changes)	-	2200	NA
Cl 6.5(Intermittent Discharge Test)	-	600	Relevant all tests of IS 16018 is covered in our NABL scope Sl. no.522 -578 and site testing at Sl. no. 142 -145
Clause 8.4.1.1(Phosphorus)	-	0	NA
5.5.2(Gross Mass)	-	500	NA
6.4(Retention of charge)	-	600	NA
6.6.1(External Corrosion Test)	-	6000	NA
6.6.2(Internal Corrosion Test)	-	6000	NA
6.7.1(Observation of Durability Test after Nozzle Drop Test and Displaced Test)	-	2500	NA
6.7.2(Durability test of trailer mounted fire extinguisher)	-	1000	NA
6.7.3(Nozzle Drop Test)	-	1000	NA
6.7.4(Displaced Test)	-	1500	NA
7.2(Class 'A' Fire Test 4A)	-	27000	NA
7.2(Class 'A' Fire Test 6A)	-	32000	NA
7.2(Class 'A' Fire Test 10A)	-	37000	NA
7.2(Class 'A' Fire Test 15A)	-	51000	NA
7.2(Class 'A' Fire Test 20A)	-	73000	NA
7.2(Class 'B' Fire Test 21B)	-	10000	NA
7.2(Class 'B' Fire Test 34B)	-	15000	NA
7.2(Class 'B' Fire Test 55B)	-	37000	NA
7.2(Class 'B' Fire Test 70B)	-	42000	NA
7.2(Class 'B' Fire Test 89B)	-	52000	NA
7.2(Class 'B' Fire Test 113B)	-	57000	NA
7.2(Class 'B' Fire Test 144B)	-	67000	NA
7.2(Class 'B' Fire Test 183B)	-	75000	NA
7.2(Class 'B' Fire Test 233B)	-	85000	NA
8.1.2(Leakage Observation during conditioning Test)	-	500	NA
8.1.3(Requirement of Welding)	-	600	NA
8.1.4(Construction Requirement)	-	0	NA
8.1.6(Thread of Plastic Components)	-	200	NA
8.1.7(Drain Plug)	-	200	NA
8.2(High Pressure Cylinder)	-	500	NA
8.3.1(Burst Test)	-	4400	NA
8.3.2(Deformation Test)	-	2000	NA
8.3.3(Pressure cycling Test)	-	1200	NA
8.6(Minimum wall thickness of the cylinder)	-	600	NA
8.7.1(Caps valves and closure)	-	2200	NA
8.7.2(Requirement of threaded connections on cylinder)	-	200	NA
8.7.3(Requirement of filling opening diameter)	-	200	NA
8.7.4(Requirement of collar)	-	0	NA
8.7.5(Requirement of burst test of cap,valve and closure)	-	2200	NA
8.7.6(Requirement of edges and surfaces)	-	0	NA
8.8(Safety and Anti-overfill devices)	-	500	NA
3.16 and 8.1.1(Determination of maximum service pressure)	-	300	NA
3.19 and 8.3(Determination of Service Pressure)	-	300	NA
8.9.2(Leakage Test)	-	600	NA
8.11.1(Requirement of the Discharge Assemblies)	-	400	NA
8.11.2(Requirement of hose and coupling system)	-	400	NA
8.11.3(Requirement of burst pressure of hose assemblies for except carbon dioxide fire extinguishers)	-	400	NA
8.11.3(Requirement of burst pressure of hose assemblies for carbon dioxide fire extinguishers)	-	400	NA
8.12(Control valve test)	-	600	NA
8.13.1(Horn of carbon dioxide extinguisher)	-	200	NA
8.13.2(Requirement to prevent loosening or detachment)	-	200	NA
8.13.3(Load test on discharge horn)	-	200	NA
8.14(Method of operation for carbon dioxide extinguishers)	-	1200	NA
8.14(Method of operation for gas cartridge type extinguishers)	-	1200	NA
8.15(Safety Locking Devices)	-	1200	NA
8.16(Pressure gauges for low pressure extinguishers)	-	5000	NA
8.17(Dip tubes and Filters for water based Extinguisher)	-	1200	NA
8.18.1(Carriage Assembly)	-	1100	NA
8.18.2(Mobility)	-	1200	NA
8.18.3(Hose Retaining Unit)	-	600	NA
9.1(Colour)	-	600	NA

Complete

01 Jul, 2024

IS 15683 (2018)

Portable Fire Extinguishers — Performance and Construction — Specification ( First Revision )

302300.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 5.3.1(Filling Requirements)	-	600	NA
Cl. 5.3.2(Filling Requirements)	-	600	NA
Cl. 5.3.3(Capacities)	-	600	NA
Cl. 6(PRESSURE REQUIREMENTS FOR LOW PRESSURE EXTINGUISHERS)	-	1000	NA
Cl. 6(PRESSURE REQUIREMENTS FOR LOW PRESSURE EXTINGUISHERS)	-	1000	NA
Cl. 7.1(GENERAL OPERATING PERFORMANCE REQUIREMENTS)	-	500	NA
Cl. 7.2 - Table 1(GENERAL OPERATING PERFORMANCE REQUIREMENTS)	-	500	NA
Cl. 7.3(Resistance to Temperature changes)	-	2200	NA
Cl 7.4.3( Leakage Test)	-	600	NA
Cl 7.5.1(Impact Resistance Test)	-	600	NA
Cl 7.5.2(Vibration Resistance Test)	-	1200	NA
Cl 7.6(Resistance to Corrosion)	-	12000	External & Internal
Cl 7.7(Tapping Test)	-	1200	NA
Cl 7.8(Intermittent Discharge Test)	-	600	NA
Cl 8.1(Rating Suitability for the Various Classes of Fire)	-	850000	1A – 14000, 2A – 16000, 3A – 18000, 4A – 27000, 6A – 32000, 10A – 37000,15A – 51000, 20A – 73000.21B- 10000, 34B- 15000, 55B – 37000 70 B – 42000, 89B – 52000, 133B – 57000 144B – 67000, 183B – 75000, 233B – 85000 D–10000,
Cl 8.6(Electrical Conductivity of Extinguisher Discharge)	-	30000	5F –5000, 15F –10000 25F–15000, 75F -25000 Composite cylinder - 5000
Cl 9(CONSTRUCTION REQUIREMENTS)	-	1800	NA
Cl 9.2.2(Burst Test)	-	4400	NA
Cl 9.2.3(Crushing Test)	-	1200	NA
Cl 9.2.4(Pressure Cycling Test)	-	1200	NA
Cl 9.2.5(Welded Low Carbon Steel Cylinder)	-	600	NA
Cl 9.2.6(Stainless Steel Cylinders)	-	600	NA
Cl 9.2.7(Aluminium Cylinders)	-	600	NA
Cl 9.3(Carrying Handle)	-	600	NA
Cl 9.4(Mounting)	-	600	NA
Cl 9.5(Caps, Valves and Closures)	-	2800	NA
Cl 9.7.1(Requirements for Plastics Components)	-	2000	NA
Cl 9.7.2(Requirements for Plastics Components)	-	1000	NA
Cl 9.7.3(Requirements for Plastics Components)	-	2000	NA
Cl 9.8(Hose Assemblies)	-	1500	NA
Cl 9.9 - Table 10(Method of Operation)	-	1200	NA
Cl 9.10(Safety-Locking Devices)	-	1200	NA
Cl 9.11.1(Requirements for Pressure Gauges and Indicators for Low-Pressure Extinguishers)	-	200	NA
Cl 9.11.2(Calibration Test - Gauges and Indicators)	-	2500	NA
Cl 9.11.3(Burst Strength Test — Gauges and Indicators)	-	1000	NA
Cl 9.11.4(Water Resistance Test — Gauges and Indicators)	-	1300	NA
Cl 9.12(Dip-Tubes and Filters — Water-Based Extinguishers)	-	1200	NA
Cl 9.13(Horn Test for Carbon Dioxide (CO2) Extinguishers)	-	600	NA
Cl 9.14(Requirements for Extinguishants Filled in the Extinguisher)	-	2400	MAP-2400 BC- 1200 ST-1200
Cl 10(MARKING AND COLOUR)	-	500	All test facilities available except carbon content.
Cl. 5.3.2(Filling Requirements)	-	600	-
7.4.1.(Retention of charge following partial discharge)	-	600	-
7.6.1(Internal Corrosion Test Test is applicable only for water based & clean agent PFEs)	-	6000	-
9.6(Safety Device)	-	300	-
9.2.8(Composite Cylinder)	-	5000	-
9.14.1(Content of Mono Ammonium Phosphate)	-	2400	-
9.14.2(Content of Sodium Bicarbonate/Potassium Picarbonate for BC Powder)	-	1200	-
9.14.3(Surface Tension of Foam Solution)	-	1200	-

Complete

01 Jul, 2024

IS 8442 (2008)

Stand post type water and foam monitor for fire fighting - Specification (First Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4, Table-2(Carbon)	-	25000		Relevant test of IS 8442:2008 is covered in NABL scope S.No. 488 to 496 and S.No. 127 to 130.

Complete

01 Jul, 2024

IS 8423 (1994)

Specification for controlled percolating hose for fire fighting

20000 View breakup
For BIS Samples: 1.5 times of BIS Testing Charges. For Others: Rs.20,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl3(The bose shall be made of a jacket of cotton or synthetic material or their combination. The jacket shall be treated internally with any suitable coating agent to ensure controlled percolation. The jacke.t shall be free from visible defects. such as dlrt, knots, lumps and irregulari ty of twists. )	-	500	NA
Cl.4.1.1(The nominal internal diameter of hose shall be 38, SO, 63 and 70 rom.The internal diameter of the hose shall be measured by a suitable tapered plug gauge, and shall conform to the specified diameter within a tolerance of + 2·0 mm. -0'0)	-	500	NA
Cl.5.(The hose length shall be 30 m or of such length as required.)	-	500	NA
Cl.6(The hose shall be flexible and on being machine coiled, the diameter of the coil of 30 m hose shall not exceed 45 em for all slzes in dry state without coupling. The coil diameter shall be measured at the widest part of the coil.)	-	500	NA
Cl.7(The average mass oC hose per metre shall not be more than that prescribed in Table 1. For determination of mass, sample of the hose shall be conditioned at 27 ± 2°C and 65 ± 5 percent relative humidity Cor a period of at least 48 hours and then shall be weighed under same conditions.)	-	500	NA
Cl.8(The percolation, when tested in accordance with the procedure laid down in 8.1.1 shall not exceed the limits prescribed in Table 2.)	-	3000	NA
Cl.9(The full length sample of the dry hose is connected to the pump fitted with water and pressure built up to. 7 kaf/cn,' (70 N/cm' ) steadily over a period of two minutes. After the hose has been at pressure 7 kif/em' ( 70 NIemi) for a period of S minutes, a visual inspection I is made of the length to ascertain the evenness and degree of wetting out along the complete length of hose and at least 75 percent of the hose jacket shall be evenly and consistently wetted out in this manner.)	-	1000	NA
Cl.10(Full length of hose shall be subjected to an internal hydraulic pressure of 2'1 MPa (21'4 kgf/ems ) at the rate of I MPa ( 10'2 kaf/em· )/ minute in ac.cordance with 1.3 of IS 443 : 191~ and maintained for a period of one minute. During this test. the hose shan not show breakage of yarn.)	-	13500	Testing charge of Proof Pressure, Hydrostatic Burst pressure, Flammability, Kink Test & change in size are included as Cl 11.1, Cl 12.1, Cl 13.1 & Cl 14.1 are missing in portal.

Complete

01 Jul, 2024

IS 4989 (2018)

Foam concentrate for producing mechanical foam for fire fighting - Specification (Fourth Revision)

116000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4.1, Table 1, Sr. No. 1 (Visual Examination )	-	200	AFFF - 69,200 PF - 66,800 FP - 66,800 FFFP - 69,200 SF - 6800 AR-AFFF - 1,16,000 AR-FFFP - 1,16,000 AR-FP -1,13,600
Cl. 4.1, Table 1, Sr. No. 2(Freezing and thrawing)	-	599.98	NA
Cl. 4.1, Table 1, Sr. No. 3(pH (Original Sample))	-	300	NA
Cl. 4.1, Table 1, Sr. No. 3(pH (ageing Sample))	-	300	NA
Cl. 4.1, Table 1, Sr. No. 4(Miscibility with distilled water)	-	600	Specific Gravity for both Original and Ageing - Rs 600
Cl. 4.1, Table 1, Sr. No. 5(Viscosity)	-	600	NA
Cl. 4.1, Table 1, Sr. No. 6(pour point)	-	600	NA
Cl. 4.1, Table 1, Sr. No. 7(Sludge content)	-	600	NA
Cl. 4.1, Table 1, Sr. No. 8(Surface tension)	-	1200	Expansion - Rs 1200 25% - Rs 1200
Cl. 4.1, Table 1, Sr. No. 10(spreading coefficient)	-	1200	Fire Test on Polar solvent (Fresh Water) - Rs 30000 Fire Test on Polar Solvent (Salt Water) - Rs 30000 Fire Test on Non Polar Solvent (Fresh Water) - Rs 24000 Fire Test on Non Polar Solvent (Salt Water) - Rs 2400 expansion Rs 1200

Complete

01 Jul, 2024

IS 4308 (2019)

Dry Chemical Powders for Fire Fighting — BC, ABC and D Types — Specification ( Third Revision )

135200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 5 Table 1(i)(Main Chemical constituent-Sodium/Potassium bicarbonate )	-	1200	BC powder - Rs 1200 ABC - Rs 2400 D powder - Rs 600
Clause 5 Table 1(iii)(Apparent density (Declared value by the manufacturer))	-	600	BC - Rs 600 ABC -Rs 600 D - Rs 600
Clause 5 Table 1(iv)(Particle size / sieve analysis (Declared value by the manufacturer))	-	600	BC - Rs 600 ABC - Rs 600 D - Rs 600
Clause 5 Table 1(vi)(Water repellency)	-	1200	BC - Rs 1200 ABC - Rs 1200 D - Rs 1200
Clause 5 Table 1(vii)(Moisture content)	-	600	BC - Rs 600 ABC - Rs 600 D - Rs 600
Clause 5 Table 1(viii)(Rate of flow)	-	600	BC - Rs 600 ABC - Rs 600 D - Rs 600
Clause 5 Table 1(ix)(Foam compatibility (required if declared by the manufacturer))	-	5000	BC - Rs 5000 ABC - Rs 5000 D - NA
Clause 5 Table 1(x)(Fire test)	-	37000	BC - Rs 37000 ABC - Rs 53000 D - Rs 10000
Clause 5 Table 1(xi)(Temperature resistance test)	-	2000	BC - Rs 2000 ABC - Rs 2000 D - Rs 2000
Clause 5 Table 1(i)(Main chemical constituent-(Monoammonuim phosphate))	-	2400	BC - Rs 1200 ABC - Rs 2400 D - Rs 600
Clause 5 Table 1(x)(Fire test)	-	53000	BC - Rs 37000 ABC - Rs 53000 D - Rs 10000
Clause 5 Table 1(i)(Main chemical constituent(Eutectic mixture of chlorides of sodium, potassium and barium))	-	600	BC - Rs 1200 ABC - Rs 2400 D - Rs 600
Clause 5 Table 1(x)(Fire test)	-	10000	BC - Rs 37000 ABC - Rs 53000 D - Rs 10000
Clause 5 Table 1(xii)(colour)	-	200	BC - Rs 200 ABC - Rs 200 D - Rs 200

Complete

01 Jul, 2024

IS 2925 (1984)

Specification for industrial safety helmets (Second Revision)

8200 View breakup
Rs.8200/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Harness)	-	250	NA
3.3(Metal Parts)	-	1000	NA
4.1(Sizes)	-	200	NA
5.1(Shell)	-	300	NA
5.2(Harness)	-	500	NA
5.3(Chin Strap or Nape Strap)	-	300	NA
5.4(Lamp Bracket)	-	300	NA
5.5(Cable Clip)	-	300	NA
6.1(Workmanship & Finish)	-	200	NA
7.1(Mass)	-	200	NA
8.1(Shock Absorption Resistance)	-	1700	NA
8.2(Penetration Resistance)	-	500	NA
8.3(Flamability Resistance)	-	400	NA
8.4(Electrical Resistance)	-	700	NA
8.5(Water Absorption)	-	400	NA
8.6(Heat Resistance)	-	700	NA

Complete

01 Jul, 2024

IS 2871 (2012)

Branch pipe, universal for fire fighting purpose - Specification (Second Revision)

10000 View breakup
For BIS Samples: 1.5 times of BIS Testing Charges. For Others: Rs.10,000/

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4(Shape & Dimensions)	-	2000	NA
Cl 5(Workmanship & finish)	-	2000	NA
Cl 6.1(Hydraulic Test)	-	3000	NA
Cl 6.2(Operational Test)	-	3000	NA

Complete

01 Jul, 2024

IS 2546 (1974)

Specification for galvanized mild steel fire bucket (First Revision)

6000 View breakup
Rs.6000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 2.1,2.2,2.3(Carbon)	-	6000		Relevant Tests of the Standard are included in Sl.No. 298 to 307 of NABL Scope.

Complete

01 Jul, 2024

Bureau of Indian Standards

The National Standards Body of India

Advance Firetec and Research Lab Pvt. Ltd.

B-3, Mangolpuri, Industrial Area Phase II, NEW DELHI, North West, Delhi, 110034

9971032375 aftrlab@gmail.com

Scope List

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found