BIS - LIMS (Laboratory Information Management System)

Vimta Labs Limited

Plot No.11/6, road No. 9, IDA, Nacharam, Rangareddy, Keesara, Hyderabad, Medchal Malkajgiri, Telangana, 500076

9704156476 info@emtac.in

Scope List

Reset

38 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 1046 (2014)

Cash boxes - Specification (Fourth Revision)

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause-5.1(Fabrication)	-	5000	NA
Clause-5.2(Body)	-	5000	Na
Clause-5.3(Bottom)	-	5000	Na
Clause-5.4(Lid)	-	5000	Na
Clause-5.5(Hinges)	-	5000	Na
Clause-5.6(Bolts)	-	5000	Na
Clause-5.7(Handle)	-	5000	Na
Clause-5.8(Lock)	-	5000	Na
Clause-5.8.1(Levers)	-	5000	Na
Clause-5.8.2(Lever Spring)	-	5000	Na
Clause-5.8.3(Key)	-	5000	Na
Clause-5.8.4(Unpickability)	-	5000	NA
Clause-5.8.5(Non-interchangeability)	-	5000	Na
Clause-6(Internal Fixtures)	-	5000	Na
Clause-8(Marking)	-	5000	Na

Complete

25 Oct, 2027

-
-

IS 11188 : Part 1 (2014)

Vault (Strong Room) doors: Part 1 specification (Second Revision)

300000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 Table 1(DIMENSIONS)	-	5000	-
5 Table 1(i) Door Type)	-	5000	-
5 Table 1(ii) Overall dimension of vault door)	-	5000	-
5 Table 1( a) Height,H)	-	5000	-
5 Table 1( b) Width W)	-	5000	-
5 Table 1(iii) Inside dimension or clear opening when door shutters are swung open at 180 degree)	-	5000	-
5 Table 1( a) Height H, Min b) Width W, Min iv) a) Thickness of door frame angle, channel or section made out of M.S. plates, if built up to form a channel,Min )	-	5000	-
5 Table 1( b) Thickness of door frame, if fabricated from single plate to form channel/multi-bend section, Min)	-	5000	-
5 Table 1( v) Dimension of the rebate coming under shear)	-	5000	-
5 Table 1( vi) Thickens of grill gate angles or section made out of M.S. plates, Min)	-	5000	-
5 Table 1( vii) Diameter of grill gate rods, Min)	-	5000	-
5 Table 1( viii) Pitch of grill gate rods)	-	5000	-
5 Table 1(ix) Thickness of doors slab, thickness over rebate)	-	5000	-
5 Table 1(xii) Wall thickness (recommendation))	-	5000	-
5 Table 1(xiii) Number of locks)	-	5000	-
5 Table 1(xiv) Number of shooting bolts on hinge side, Min)	-	5000	-
5 Table 1(xv) Number of shooting bolts on opposite side,Min)	-	5000	-
5 Table 1(xvi) Number of shooting bolts at top,Min)	-	5000	-
5 Table 1(xviii) Diameter of shooting bolts, Min)	-	5000	-
5 Table 1(xix) Depth of engagement of shooting)	-	5000	-
8( CONSTRUCTION AND GENERALREQUIREMENTS)	-	5000	-
8.1.1( Ventilating Grill Gate (Inside))	-	5000	-
8.1.2( Main Door (Outside))	-	5000	-
8.2(Doors Frame)	-	5000	-
8.2.1 (Rebate of the Door Frame)	-	5000	-
8.2.2 (Compression Mechanism)	-	5000	-
8.2.3 (Crane Hinge Mechanism)	-	5000	-
8.3(Locking Mechanism)	-	5000	-
8.3.1( Lock Case)	-	5000	-
8.3.2 (Bolt Work)	-	5000	-
8.3.2.1 Table 1.(The number of bolts and their minimum dimension)	-	5000	-
8.4(Lock)	-	5000	-
8.4.5 (Automatic Relocking Device)	-	5000	-
9( DOOR FITTINGS)	-	5000	-
9.1(Hinges)	-	5000	-
9.1.1( Adjusting Bolt)	-	5000	-
9.2( Handles)	-	5000	-
9.3( Foot Bridge)	-	5000	-
10(FINISH)	-	20000	-
10.3( Cross Hatch Test)	-	20000	-
IS 11188 (Part 2), 3.1 and 3.2( i)Net Working time, Minutes)	-	37500	-
IS 11188 (Part 3) Cl4.4(Fire endurance IS 11188 (Part 3))	-	85000	-
IS 11188 (Part 3) Cl 4.5(Fire and stream hose IS 11188 (Part 3))	-	85000	-
11(Burglary resistance IS 11188 (Part 2))	-	37500	-

Complete

25 Oct, 2027

-
-

IS 14561 (2014)

Fire resisting (Insulating) filing cabinets - Specification (Second Revision)

335000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Types & Rating)	-	5000	-
3.1(i) The fire resisting filing cabinets shall be of two types: a) Vertical fire resisting filing cabinet, and b) Lateral fire resisting filing cabinet.)	-	5000	-
3.2(ii) The standard and lateral fire resisting filing cabinets shall have one-drawer or two-drawers or three drawers or four-drawers. A typical drawing of the fire resisting filing cabinet is given in Fig. 1.)	-	5000	-
3.3(iii) The fire resisting filing cabinets shall have fire resisting ratings of 60 min or 120 min or 180 min or 240 min)	-	5000	-
4(Dimensions and Tolerances, mm)	-	5000	-
4.1(Overall Dimensions of Fire Resisting Filing Cabinets: The internal usable space of the drawers of fire resisting (insulating) filing cabinets shall be as specified in Table 1 or any other size which is mutually agreed to between the purchaser and the supplier.)	-	5000	-
4.1(Internal usuable space of drawer, mm:)	-	5000	-
4.1(iv) Height of the bottom drawer above floor level)	-	5000	-
6(Designations: The filing cabinet shall be designated by the commonly used name, type, the fire rating and the number of this Indian Standard.)	-	5000	-
7(Constructions)	-	5000	-
7.2(Cabinets Sub-Assembly: The external body and drawer fronts of the fire resisting (insulating) filing cabinet shall be of double wall type with homogeneous insulating material filled in between. Further the construction of the cabinet shall be such that each drawer slides in an individual inner box. The inner boxes shall have a insulating layer between each other to prevent fire spreading from one drawer to another. The joining of inner box, intermediate piece and outer body shall be such that, it forms a cavity to receive drawer front )	-	5000	-
7.3(Filing Drawer: The drawer shall be made from mild steel or galvanized steel sheet of not less than 0.6 mm and not more than 1.0 mm nominal thickness and shall have an arrangement on the sides suitable for the drawer suspension system and an arrangement to stop it when fully pushed in.)	-	5000	-
7.3.1(Drawer Front: The drawer front shall be made from mild steel or galvanized steel sheet of not less than 0.6 mm and not more than 1.0 mm nominal thickness and shall be firmly secured to the drawer body by welding, screwing or riveting or any combination of these processes. The construction of drawer front shall be such that it snugly fits in the cavity provided for the same )	-	5000	-
7.4.1(Latch: Each drawer of the cabinet shall be removable but shall be fitted with a latch/positive stop to prevent inadvertent withdrawal and rebound. Such latch shall be lifted/unlocked by the pull of the handle or any other mechanism.)	-	5000	-
7.4.2(The locking mechanism shall be designed in such a manner so that there is minimum passage for direct conduction of heat from outside to inside)	-	5000	-
7.5(Drawer Suspension The drawer suspension shall be either of the following types to ensure withdrawal of the full depth of the drawer: a) Ball bearing / Roller bearing suspension (Movement), b) Solid roller suspension, and c) Telescopic slide suspension (Extension)	-	5000	-
7.6(Handles: Each drawer shall be provided either with a handle made from ferrous/non-ferrous material suitably coated for corrosion resistance, or any polymer and fixed to the front of the drawer or with a built in pulling mechanism)	-	5000	-
7.6.1(The drawer handle shall be strong enough to take a minimum pull of 50 N for 2 min. There shall be no sharp corners or edges to avoid injury and damage to clothing)	-	5000	-
7.7.1(Locks: Top drawer shall be provided with single or dual control key lock having not less than 6 levers or pin cylinder lock having not less than 6 pins, with duplicate keys of stainless steel/nonferrous alloy. Alternatively if required by the purchaser a 3 wheel combination lock or electronic combination lock may be provided either in place of key lock or in addition to key lock)	-	5000	-
7.7.2(Each drawer may also be provided with individual key lock or pin cylinder lock or combination lock subject to agreement between the purchaser and the supplier.)	-	5000	-
7.8.1(The locking mechanism shall be such that when the top drawer is pushed-in fully, it actuates locking mechanism to lock all other drawers imultaneously, when they are in pushed-in position)	-	5000	-
7.8.1.1(At the time of locking the cabinet, if one of the drawers is not fully pushed-in, that drawer shall remain unlocked and can be used. As soon as that drawer is pushed-in fully, it shall get locked automatically without further operation of key by the user.)	-	5000	-
7.8.1.2(In addition to the above, isolation mechanism shall also be provided to permit independent locking/ use of other drawers. Such isolation mechanism provided on drawers shall be manually operated)	-	5000	-
8(Assemblies)	-	5000	-
8.1(The components shall be assembled by bolting, welding, riveting or by any combination of these processes)	-	5000	-
8.2(All joints between outer body and inner boxes, the drawer front and the outer body shall be such that, there is minimum direct conduction of heat from outer body to inner body)	-	5000	-
9.1(Drawer Suspension Test and Latch Test: The drawer loaded with evenly distributed load of 30 kg (excluding the weight of drawer) in any drawer shall be operated for 5 000 cycles at a rate of 300 cycles/h ±10 percent. One opening and one closing shall constitute one cycle. The test shall be carried out with maximum two breaks by using electrically or mechanically operated test equipment with a counter fitted on it. After 5 000 cycles the suspension slide and latch mechanism shall not show any apparent distortion, cracks, or failures to operate in a normal smooth manner)	-	5000	-
10.1(Finish: All dents, burrs and sharp edges shall be removed from the various components and they shall be thoroughly degreased and cleaned of rust and scale)	-	15000	-
10.2(The inside and outside surfaces of the fire resisting (Insulating) filing cabinet shall be painted or powder coated. In case of paint, an appropriate primer and undercoating shall be used in accordance to industry practices. The minimum overall thickness of the coatings shall be 50 μ for powder coating and 70 μ for liquid paint. Cross hatch test shall be conducted to confirm the adhesion of coating in accordance with 10.2.1)	-	15000	-
10.2.1(Cross Hatch Test)	-	15000	-
11.1(Fire endurance test)	-	150000	-
11.2(Fire and impact test)	-	100000	-
12.1(Marking of Cabinets:A metal plate showing classification of cabinet together with the manufacturer’s name, serial number and the year of manufacture shall be fixed inside surface of the top drawer of the cabinet in such a way that it is visible when it is opened.)	-	5000	-
12.2(Marking on Keys: The keys shall bear an identification number which shall not be the same as the serial number of the cabinet)	-	5000	-

Complete

25 Oct, 2027

-
-

IS 14562 (2014)

Fire resisting computer media protection cabinets - Specification (First Revision)

325000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2(Nominal Size (Declared))	-	5000	NA
3(Type)	-	5000	NA
4(Materail(Declaration))	-	5000	NA
5(Dimension & Tolerance - Nominal Size)	-	5000	NA
5(Nomina Inside dimension - Height)	-	5000	NA
5(Nomina Inside dimension - Width)	-	5000	NA
5(Nomina Inside dimension - Depth)	-	5000	NA
6(Designation)	-	5000	NA
7(Construction)	-	5000	NA
8(Assembly)	-	5000	NA
9.1(Fabrication (Thickness of Internal steelsheet))	-	5000	NA
9.2(Shelf)	-	5000	Na
9.3(Door (Thickness of steel sheet))	-	5000	Na
9.3(Door (Thickness of steel sheet))	-	5000	NA
9.4(Handle)	-	5000	Na
9.5(Compression mechanism)	-	5000	NA
9.6(Weight)	-	15000	NA
10(Sampling (Sample quantity))	-	5000	NA
11(Tests - Fire Resistancy)	-	150000	NA
11(Tests - Fire Resistancy)	-	150000	NA
11.6(Criteria for conformity -Fire Endurance test)	-	50000	NA
11.6(Criteria for conformity -Fire Endurance test)	-	50000	NA
11.6(Criteria for conformity -Fire & Impcat test)	-	50000	NA
11.6(Criteria for conformity -Fire & Impcat test)	-	50000	na
11.6(Criteria for conformity -Fire Endurance test)	-	50000	NA
11.7(Test Report)	-	5000	NA
12.1(Paint-Coating thicknes)	-	25000	Na
12.2(Crotch hatch test)	-	25000	NA
12.3(Finish)	-	5000	NA
13.1(Marking)	-	5000	NA
13.1(Marking on keys)	-	5000	NA

Complete

25 Oct, 2027

-
-

IS 302 : Part 2 : Sec 80 (2017)

Household and similar electrical appliances - Safety: Part 2 - 80 particular requirements for fans (First Revision)

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Marking and Instructions)	-	200	-
7.0(Classification)	-	1000	-
8.0(Protection against access to live parts)	-	2300	-
10.0(Input and Current)	-	4000	-
11.0(Heating)	-	4000	-
13.0(Leakage Current and electric strength at operating temperature)	-	2800	-
14.0(Transient Overvoltage)	-	2000	-
15.0(Moisture resistance)	-	6000	-
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	3100	-
17.0(Overload Protection of transformer and associated circuit)	-	500	-
19.0(Abnormal Operation)	-	3000	-
20.0(Stability and mechanical hazards)	-	3500	-
21.0(Mechanical Strength)	-	2000	-
22.0(Construction)	-	500	-
23.0(Internal Wiring)	-	100	-
24.0(Components)	-	500	-
25.0(Supply Connection and External Flexible Cords)	-	1200	-
26.0(Terminals for external conductors)	-	500	-
27.0(Provision For Earthing)	-	3000	-
28.0(Screws and Connections)	-	2500	-
29.0(Creepage Distances and Clearances)	-	1500	-
30.0(Resistance To Heat and Fire)	-	4400	-
31.0(Resistance To Rusting)	-	500	-

Complete

25 Oct, 2027

-
-

IS 374 (2019)

Specification for electric ceiling type fans and regulators (Third Revision)

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	100	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	115.7	-
8.1,a(Marking )	-	115.7	-
8.1,b(Marking )	-	115.7	-
8.1,c(Marking )	-	115.7	-
8.1,d(Marking )	-	115.7	-
8.1,e(Marking )	-	115.7	-
8.1,f(Marking )	-	115.7	-
8.1,g(Marking )	-	115.7	-
8.2(Marking )	-	115.7	-
8.3,a(Marking )	-	115.7	-
8.3,b(Marking )	-	115.7	-
8.3,c(Marking )	-	115.7	-
8.3,d(Marking )	-	115.7	-
8.3,e(Marking )	-	115.7	-
8.4(Marking )	-	115.7	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	115.7	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	115.7	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	115.7	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	15.7	-
6.2(Rating)	-	100	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	100	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	2000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	2900	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	2100	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	1000	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	7800	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	500	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	1500	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	1500	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	800	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	100	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	100	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	100	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	500	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	800	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	500	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	1000	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	100	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	800	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	2100	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	500	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	0	-
10.1(Speed Regulators)	-	1000	-
10.2(Speed Regulators)	-	1000	-
10.3(Speed Regulators)	-	1000	-
10.4(Speed Regulators)	-	900	-
10.5(Speed Regulators)	-	100	-
10.6(Speed Regulators)	-	1000	-
10.7(Speed Regulators)	-	1000	-
10.8(Speed Regulators)	-	1000	-
11.1(Starting)	-	250	-
11.2(Starting)	-	250	-
12(Interchangeability)	-	100	-
13(Silent Operation)	-	100	-
14.3 & Table 1(Test for Air Performance)	-	5000	-
14.4(Measurement of Speed of the Fan )	-	800	-
14.5(Measurement of Power factor and Power Input)	-	1200	-
16(Endurance Test)	-	3000	-
17(Test for Harmonic Distortion)	-	3000	-

Complete

25 Oct, 2027

-
-

IS 302 : Part 2 : Sec 21 (2024)

Household and Similar Electrical Appliancesï¿½Safety Part 2 Particular Requirements Section 21 Storage Water Heaters

52000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General requirement)	-	0	-
5(General conditions for the tests)	-	0	-
6(Classification)	-	0	-
7(Marking and instructions)	-	2000	-
8(Protection against access to live parts)	-	2500	-
10(Power input and current)	-	3000	-
11(Heating)	-	3000	-
13(Leakage current and electric strength at operating temperature)	-	5000	-
14(Transient overvoltages)	-	2500	-
15(Moisture resistance)	-	5000	-
16(Leakage current and electric strength)	-	5000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
19(Abnormal operation)	-	2500	-
20(Stability and mechanical hazards)	-	1000	-
21(Mechanical strength)	-	2500	-
22(Construction)	-	2000	-
23(Internal wiring)	-	500	-
25(Supply connection and external flexible cords)	-	1000	-
26(Terminals for external conductors)	-	500	-
27(Provision for earthing)	-	1000	-
28(Screws and connections)	-	500	-
29(Clearances, creepage distances and solid insulation)	-	2000	-
30(Resistance to heat and fire)	-	3000	-
31(Resistance to rusting)	-	1000	-
A.101(Pressure test)	-	2500	-
22.101(rated pressure)	-	500	-
22.102(Closed water heaters)	-	500	-
22.103(Addition)	-	500	-
22.104(Addition)	-	500	-
22.105(Cistern-type water heaters)	-	500	-
22.109(Addition)	-	500	-

Complete

25 Oct, 2027

-
Included w.e.f.25.03.2025 Exclusion Cl 19.11.4.1 to Cl 19.11.4.7 (EMI/EMC) Cl 32 (Radiation, toxicity and similar hazards) Cl 9 (Starting of motor-operated appliances) Cl 12 (Charging of metal-ion batteries) Cl 18 (Endurance) Cl 24 (Components)

IS 302 : Part 2 : Sec 3 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 3 electric iron (First Revision)

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	500	-
6(Classification- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	5000	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.3(Marking- IS 302-1)	-	500	-
7.4(Marking- IS 302-1)	-	500	-
7.6(Marking- IS 302-1)	-	500	-
7.7(Marking- IS 302-1)	-	500	-
7.8(Marking- IS 302-1)	-	500	-
7.11(Marking- IS 302-1)	-	500	-
7.12(Marking- IS 302-1)	-	500	-
7.13(Marking- IS 302-1)	-	500	-
7.14(Marking- IS 302-1)	-	500	-
7.15(Marking- IS 302-1)	-	500	-
7.101(Marking)	-	500	-
8( Protection Against Electric Shock, IS 302-1)	-	1000	-
10(Power Input and Current, IS 302-1)	-	2000	-
11(Heating, IS 302-1)	-	2000	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
14(Transient Over Voltages, IS 302-1)	-	2000	-
15.1(Moisture Resistance, IS 302-1)	-	500	-
15.2(Moisture Resistance, IS 302-1)	-	500	-
15.3(Moisture Resistance, IS 302-1)	-	5000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
19.4(Abnormal Operation, IS 302-1)	-	1000	-
19.4(Abnormal Operation, IS 302-1)	-	0	-
19.5(Abnormal Operation, IS 302-1)	-	1000	-
19.5(Abnormal Operation, IS 302-1)	-	0	-
19.7(Abnormal Operation)	-	1200	-
19.9(Abnormal Operation)	-	500	-
19.1(Abnormal Operation)	-	500	-
19.101(Abnormal Operation)	-	1000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	300	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	200	-
21.1(Mechanical Strength, IS 302-1)	-	200	-
21.2(Mechanical Strength, IS 302-1)	-	300	-
21.101(Mechanical Strength, IS 302-2-3)	-	2000	-
22(Construction, IS 302-1)	-	1000	-
22.101(Construction)	-	500	-
22.102(Construction)	-	500	-
22.103(Construction)	-	200	-
22.104(Construction)	-	200	-
22.106(Construction)	-	100	-
22.107(Construction)	-	100	-
23.1(Internal Wiring, IS 302-1)	-	200	-
23.2(Internal Wiring, IS 302-1)	-	200	-
23.3(Internal Wiring, IS 302-1)	-	100	-
23.4(Internal Wiring, IS 302-1)	-	100	-
23.5(Internal Wiring, IS 302-1)	-	100	-
23.6(Internal Wiring, IS 302-1)	-	100	-
23.7(Internal Wiring, IS 302-1)	-	100	-
23.8(Internal Wiring, IS 302-1)	-	100	-
23.9(Internal Wiring, IS 302-1)	-	100	-
23.10(Internal Wiring, IS 302-1)	-	100	-
24.1(Components, IS 302-1)	-	500	-
24.2(Components, IS 302-1)	-	0	-
24.4(Components, IS 302-1)	-	0	-
24.5(Components, IS 302-1)	-	0	-
24.6(Components, IS 302-1)	-	0	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	200	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	200	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	300	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	200	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	200	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
26(Terminals for External Conductors, IS 302-1)	-	100	-
27.1(Provision for Earthing, IS 302-1)	-	100	-
27.2(Provision for Earthing, IS 302-1)	-	100	-
27.3(Provision for Earthing, IS 302-1)	-	100	-
27.4(Provision for Earthing, IS 302-1)	-	100	-
27.5(Provision for Earthing, IS 302-1)	-	1000	-
28(Screws & Connections, IS 302-1)	-	500	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	500	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	500	-
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	1000	-
30.2(Resistance to Heat, Fire & Tracking, IS 302-1)	-	1000	-
31(Resistance of Rusting, IS 302-1)	-	500	-
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	0	-
4(General requirement)	-	100	-
16(Leakage current and electric strength)	-	0	-
19(Abnormal operation)	-	0	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	100	-
25(Supply Connection and External Flexible Cords)	-	0	-

Complete

25 Oct, 2027

-
Included w.e.f 04.03.2025 Exclusion : Cl 22.105 (Construction), Cl 17 (Overload protection of transformers and associated circuits), Cl19.11.4.1- 19.11.4.7(EMI/EMC)

Bureau of Indian Standards

The National Standards Body of India

Vimta Labs Limited

Plot No.11/6, road No. 9, IDA, Nacharam, Rangareddy, Keesara, Hyderabad, Medchal Malkajgiri, Telangana, 500076

9704156476 info@emtac.in

Scope List