BIS - LIMS (Laboratory Information Management System)

MSME Testing Centre, New Delhi

Shaheed Capt. Gaur Marg, Okhla Phase -III, New Delhi, South East, Delhi, 110020

9910201527 dctc-nr@dcmsme.gov.in

Scope List

Reset

45 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 13983 (1994)

Stainless Steel Sinks For Domestic Purposes

13300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9(Marking)	-	300	-
4(Type)	-	300	-
6(Thickness of sheet/strip)	-	300	-
6(Depth of bowl)	-	300	-
6(Internal dimensions of the bowl)	-	600	-
6(Bowl locating limits)	-	600	-
6(Co-ordinating sizes)	-	1800	-
7.1(Consruction and workmanship)	-	300	-
7.1.1(Consruction and workmanship)	-	300	-
7.2(Consruction and workmanship)	-	300	-
7.2.1(Consruction and workmanship)	-	300	-
7.3(Drainers)	-	300	-
7.4(Waste outlet)	-	300	-
7.5(Tap holes)	-	300	-
7.6(Overflows)	-	300	-
8(Finish)	-	300	-

Complete

IS 398 : Part 2 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 2 aluminium conuuctors, galvanized steel - Reinforced (Third Revision)

8276 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	1444	-
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	1444	-
13.5.1 (mech)(Wrapping Test Aluminium Wires Before Stranding)	-	1271	-
13.5.1 (mech)(Wrapping Test Aluminium Wires After Stranding)	-	1271	-
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1271	-
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires After Stranding)	-	1271	-
13.6 (elec)(Resistance test-Aluminium wire before Stranding)	-	1652	-
13.6 (elec)(Resistance test-Aluminium wire after stranding)	-	1652	-
13.7.2 (chem)(Mass of Zinc coating)	-	1386	-
13.7.2 (chem)(Uniformity of Zinc coating)	-	1386	-
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires Before Stranding)	-	559	Nominal Size
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires Before Stranding)	-	1444	-
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires Before Stranding)	-	559	Nominal Size
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires After Stranding)	-	559	Nominal Size
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires After Stranding)	-	559	Nominal Size
13.3 Table 2 (mech)(Breaking Load of Steel Wires Before Stranding)	-	1444	-
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires After Stranding)	-	1444	-
13.3 Table 2 (mech)(Breaking Load of Steel Wires After Stranding)	-	1444	-

Complete

IS 3589 (2001)

Steel pipes for water and sewage (168.3 To 2540 Mm Outside Diameter) - Specification (Third Revision)

Upto 457mm

15294 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1 Table 2 Table 3(Carbon Content IS 228)	-	4895	-
9.1(Tensile test-Strength)	-	1790	Tensile Strength, Yield Strength and Elongation
9.2.1(Flattening test for ERW pipes )	-	1525	-
9.3(Guided bend test(For SAW Pipes))	-	1790	-
11.1, Table 5.(Mass)	-	520	-
12.5(Strightness)	-	2234	Ovality and Straighness
14.1(Visual inspection, Appearance and Workmanship)	-	520	Workmanship

Complete

IS 4199 (2001)

Toilet soap, liquid - Specification (Third Revision)

11100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4.7.2.2(Dermatological Safety(Requirement for ECO MARK))	-	700	-
Cl 4.7.2.1(Phosphate (Requirement for ECO MARK))	-	700	-
Cl.4.6, 6.3.1 - Table 1 - Sl. No.iv)(Synthetic detergent)	-	700	-
Cl.4.6, 6.3.1 - Table 1 - Sl. No.iii)(Free caustic Alkali, as K2O)	-	700	-
Cl.4.6, 6.3.1 - Table 1 - Sl. No.ii)(Matter insoluble in alcohol)	-	700	-
Cl.4.6, 6.3.1 - Table 1 - Sl. No.i)(Total fatty matter)	-	700	-
Cl.4.5.1(Phenolic substances such as cresylic acid, if added)	-	700	-
Cl.4.4(Odour)	-	500	-
Cl.4.3(Sedimentation)	-	800	-
Cl.4.2(Storage)	-	4100	-
Cl.4.1(Description)	-	500	-

Complete

IS 4270 (2001)

Steel tubes used for water wells specification (Third Revision)

11250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2(phosphorus)	-	3795	Chemical Composition
Cl 6(Tensile Test & Flattening Test)	-	1790	Tensile Test
Cl 6(Tensile Test & Flattening Test)	-	1525	Flattening Test
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	3705	Dimension Test
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	1352	Straightness
Cl 12(Bituminous Coating & Galvanizing )	-	1386	Coating Test
Cl 14(Workmanship)	-	520	-

Complete

IS 12592 (2002)

Precast concrete manhole cover and frame - Specification (First Revision)

11957 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2(Dimensions of cover- Diameter)	-	5198	-
3(Grade)	-	520	Marking
3(Type/Shape of Cover)	-	520	Visual Examination, Shape and Finishing
7.4.1(Edge Protection and Finishing - Frame)	-	1271	-
7.4.2(Edge Protection and Finishing - Cover)	-	520	-
8(LIFTING HOOKS)	-	520	-
9.1(General)	-	520	-
9.3 and Table and Annex C(Load Test)	-	2888	-
5.2 and Table 1(Dimensions of Frame - A)	-	520	-
5.2 and Table 1(Dimensions of Frame - B)	-	520	-
5.2 and Table 1(Dimensions of Frame - C)	-	520	-
5.2 and Table 1(Dimensions of Frame - D)	-	520	-
5.2 and Table 1(Dimensions of Frame - E)	-	520	-
5.2 and Table 1(Dimensions of Frame - F)	-	520	-
5.2(Clearance at top between the frame and the cover all round the periphery)	-	520	-
5.2(Top surface ofthe frame and cover is in level)	-	520	-
5.2(Suitable taper matching with taper given for the frame shall be provided to the periphery of the cover)	-	520	-
5.2 and Fig 1(Clear cover to reinforcement)	-	520	-
Clause No. 7.4.4(Compatitbilty of Seating of cover and frame)	-	520	-

Complete

IS 2888 (2004)

Toilet soap - Specification (Third Revision)

6450 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.5, Table-1 (vii), Grade-3(Lather)	-	500	-
5.5, Table-1 (vi), Grade-1, Grade-2 & Grade-3(Free carbonated alkali)	-	950	-
5.5, Table-1 (v), Grade-1, Grade-2 & Grade-3(Chloride (as sodium chloride), IS 286)	-	950	-
5.5, Table-1 (iv), Grade-2 & Grade-3(Matter insoluble in alcohol, IS 286)	-	950	-
5.5, Table-1 (iii), Grade-1, Gr-2 & Gr-3(Free caustic alkali, as sodium hydroxide (NaOH), IS 286)	-	950	-
5.5, Table-1 (ii), Grade-1, Gr-2 & Gr-3(Rosin acids, percent by mass of total fatty matter, IS 286 )	-	1050	-
5.5, Table-1 (i), Grade-3(Total fatty matter, IS 286)	-	1350	-
5.3(Phenolic substances, IS 286)	-	1000	-

Complete

IS 15558 (2005)

Mini domestic water heater for use with LPG - Specification

15600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(Construction)	-	300	-
4.1.2(Construction)	-	300	-
4.1.3(Construction)	-	300	-
4.1.4(Construction)	-	300	-
4.1.5(Construction)	-	300	-
4.1.6(Construction)	-	300	-
4.1.7(Construction)	-	300	-
4.1.8(Construction)	-	300	-
4.1.10(Construction)	-	300	-
4.1.11(Construction)	-	300	-
4.1.12(Construction)	-	300	-
5.1(Materials)	-	300	-
5.2(Materials)	-	2500	-
5.3(Materials)	-	300	-
5.4(Materials)	-	300	-
6.1(Connections)	-	300	-
6.2(Connections)	-	300	-
6.3(Connections)	-	300	-
6.4(Connections)	-	300	-
6.5(Connections)	-	300	-
6.6(Gas Inlet Connections)	-	300	-
7(Flame Visibility)	-	300	-
8(Gas Taps)	-	2400	-
9(Flame Failure Device)	-	300	-
10(Ignition Device)	-	300	-
11(Protection Against Accidental Overheating)	-	1000	-
12(Water Rate Adjuster)	-	300	-
14(Gas Soundness)	-	300	-
15(Water Soundness)	-	300	-
16(Thermal Efficiency)	-	1000	-
17(Combustion)	-	300	-
18(Gas Consumption)	-	300	-
19.2(Ignition and flame travel)	-	300	-
20(Flame Stability)	-	300	-
21(Noise Control)	-	300	-
22(Flash Back)	-	300	-
23(Resistance to Draught)	-	300	-
24(Fire Hazard And Limiting Temperature )	-	1000	-
24(Fire Hazard And Limiting Temperature)	-	1000	-
24(Fire Hazard And Limiting Temperature)	-	1000	-
24(Fire Hazard And Limiting Temperature)	-	1000	-
25(Time For Temperature Rise)	-	1000	-
26(Hot Water Output Test)	-	1000	-
27(Marking)	-	300	-
16(Thermal Efficiency)	-	1000	-

Complete

IS 280 (2006)

Mild steel wire for general engineering purposes (Fourth Revision)

Upto 4mm

12780 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	520	Dimension
Cl 9(Tensile Test On UTM)	-	1444	-
Cl 13(Workmanship)	-	520	Freedom from defects
6 AND AS PER IS 7887(MICRO ALLOY)	-	4895	Chemical Composition
Cl 11(Workmanship)	-	2772	Coating Test
9.2(Wrapping Test)	-	1271	-
Cl 9(Tensile Test On UTM)	-	1358	Bend Test

Complete

IS 3601 (2006)

Steel tubes for mechanical and general engineering purposes - Specification (Second Revision)

16495 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Sulphur-Percentage by mass)	-	3795	Chemical Composition Test
8.0(Straightness)	-	1352	-
19.1.1, 24.1.1, 28.1.1, 33.1.1(Dimensions- Outside Dia)	-	2234	-
11.2(Surface Protection)	-	1386	-
13.1.3(Tensile Strength)	-	1790	Tensile, Yield Strength and Elongation
13.2(Flattening Test)	-	1525	-
13.3(Bend Test (Strip))	-	1444	-
13.4(Bend Test (Whole Tube))	-	1444	-
13.5(Drift Expansion Test)	-	1525	-

Complete

IS 302 : Part 2 : Sec 3 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 3 electric iron (First Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8( Protection Against Electric Shock, IS 302-1)	-	2000	-
10(Power Input and Current, IS 302-1)	-	2500	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	4000	-
14(Transient Over Voltages, IS 302-1)	-	2000	-
15.1(Moisture Resistance, IS 302-1)	-	4000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	4000	-
19.4(Abnormal Operation, IS 302-1)	-	2000	-
21.101(Mechanical Strength, IS 302-2-3)	-	2000	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
26(Terminals for External Conductors, IS 302-1)	-	2000	-
27.1(Provision for Earthing, IS 302-1)	-	2000	-
28(Screws & Connections, IS 302-1)	-	2000	-
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	4000	-
31(Resistance of Rusting, IS 302-1)	-	2500	-
11(Heating, IS 302-1)	-	2500	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	5000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	2500	-

Complete

IS 302 : Part 2 : Sec 30 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 30 room heaters (First Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.8 & IS:302-1:2008(Protection Against Access to Live Parts)	-	2500	-
Cl.10 & IS:302-1:2008(Power Input and Current)	-	2500	-
Cl.11 of IS:302-2:30: 2007(Heating : Temperature rise in winding)	-	3000	-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	4000	-
Cl.14 & IS:302-1:2008(Transient Over Voltages)	-	2000	-
Cl.15 & IS: 302-1:2008(Moisture Resistance )	-	4000	-
Cl.16 of IS:302-1:2008(Leakage current and Electric strength (After humidity): Leakage current )	-	4000	-
Cl.19.108(Abnormal Operation.)	-	2000	-
Cl.21 & IS:302-1:2008)(Mechanical Strength.)	-	2000	-
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords )	-	2000	-
Cl.26.1 of IS 302-1:2008(Terminal for External Conductors )	-	2000	-
Cl.27.1 of 302-1:2008(Provision for Earthing.)	-	2000	-
Cl.28 of 302-1:2008(Screws and Connections.)	-	2000	-
Cl.30 & IS:302-1:2008(Resistance to Heat and Fire)	-	4000	-
Cl.31 & IS:302-1:2008(Resistance to Rusting.)	-	2500	-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	2500	-
Cl.20 & IS:302-1:2008(Stability & Mechanical Hazards)	-	5000	-
Cl.22.7 of IS 302-1:2008(Construction)	-	2000	-
C.23.7 of 302-1:2008(Internal Wiring )	-	2000	2000
C.24.1.4(Component)	-	2000	-
Cl.32 & IS:302-1:2008(Radition,Toxicity and similar Hazards.)	-	2000	-
Cl.6 (Classification)	-	1000	-
Cl.17 & IS:302-1:2008(Over load Protection of Transformers and Associated Circuits )	-	2000	-
Cl.18 (Endurance. )	-	4000	-
Cl.6 (Classification)	-	2000	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7(Marking and Instructions)	-	2000	-
Cl.7.3(Marking and Instructions)	-	2000	-
Cl.7.3(Marking and Instructions)	-	2000	-
Cl.7.4(Marking and Instructions)	-	2000	-
Cl.7.5(Marking and Instructions)	-	2000	-
Cl.7.6 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.8 of IS :302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.9 of IS :302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.10 of IS :302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.11 of IS :302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.12.1 & IS:302-1:2009(Marking and Instructions)	-	2000	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.13 of IS 302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.14(Marking and Instructions)	-	2000	-
Cl.7.14 of IS302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.101(Marking and Instructions)	-	2000	-
Cl.11 & IS:302-1:2008(Heating)	-	3000	-
Cl.11 & IS:302-1:2008(Heating)	-	3000	-
Cl.11 & IS:302-1:2008(Heating)	-	3000	-
Cl.11 & IS:302-1:2008(Heating)	-	3000	-
Cl.11 & IS:302-1:2008(Heating)	-	3000	-
Cl.11 & IS:302-1:2008(Heating)	-	3000	-
Cl.11 & IS:302-1:2008(Heating)	-	3000	-
Cl.11 & IS:302-1:2008(Heating)	-	3000	-
Cl.11 & IS:302-1:2008(Heating)	-	3000	-
Cl.11 & IS:302-1:2008(Heating)	-	3000	-
Cl.11 & IS:302-1:2008(Heating)	-	3000	-
Cl.11 & IS:302-1:2008(Heating)	-	3000	-
Cl.11.8(Heating)	-	3000	-
Cl.11.8(Heating)	-	3000	-
Cl.11.8(Heating)	-	3000	-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	4000	-
Cl.15.3 of IS 302-1:200(Moisture Resistance )	-	4500	-
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	4000	-
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	4000	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	2000	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	2000	-
Cl.19.101(Abnormal Operation.)	-	2000	-
Cl.19.102(Abnormal Operation.)	-	2000	-
Cl.19.103(Abnormal Operation.)	-	2000	-
Cl.19.104(Abnormal Operation.)	-	2000	-
Cl.19.105(Abnormal Operation.)	-	2000	-
Cl.19.106(Abnormal Operation.)	-	2000	-
Table 8 of IS 302-1:2008(Abnormal Operation.)	-	2000	-
Cl.19.107(Abnormal Operation.)	-	2000	-
Cl.19.109(Abnormal Operation.)	-	2000	-
Cl.19.110(Abnormal Operation.)	-	2000	-
Cl.19.111(Abnormal Operation.)	-	2000	-
Cl.19.112(Abnormal Operation.)	-	2000	-
Cl.19.113(Abnormal Operation.)	-	2000	-
Cl.19.114(Abnormal Operation.)	-	2000	-
Cl.21.2 of IS 302-1:2008(Mechanical Strength.)	-	2000	-
Cl.21.101 (Mechanical Strength.)	-	2000	-
Cl.21.102(Mechanical Strength.)	-	2000	-
Cl.21.103(Mechanical Strength.)	-	2000	-
Cl.22.5 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.6 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.8 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.9 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.11(Construction)	-	2000	-
Cl.22.12 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.13 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.14 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.15 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.18 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.20 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.21 of IS 302-1:2008(Construction)	-	2000	-
Cl.23.4 & Cl.29 of 302-1:2008(Internal Wiring )	-	2000	-
Cl.23.5 of 302-1:2008(Internal Wiring )	-	2000	-
Cl.23.7 of 302-1:2008(Internal Wiring )	-	2000	-
Cl.24.1 of 302-1:2008(Component)	-	2000	-
Cl.24.1.3 (Component)	-	2000	-
Cl.24.1.3 (Component)	-	2000	-
Cl.24.1.3 (Component)	-	2000	-
Cl.24.1.3 (Component)	-	2000	-
C.24.2 of 302-1:2008(Component)	-	2000	-
Cl.24.10(Component)	-	2000	-
Cl. 25.2 of IS 3021:2008(Supply Connection and External Flexible Cords )	-	2000	-
Cl. 25.3 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	2000	-
Cl. 25.4 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	2000	-
Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords )	-	2000	-
Cl.25.6 of 302-1:2008(Supply Connection and External Flexible Cords )	-	2000	-
Cl.25.7.(Supply Connection and External Flexible Cords )	-	2000	-
Cl.25.8(Supply Connection and External Flexible Cords )	-	2000	-
Cl. 25.9(Supply Connection and External Flexible Cords )	-	2000	-
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords )	-	2000	-
Cl. 25.11(Supply Connection and External Flexible Cords )	-	2000	-
Cl. 25.12(Supply Connection and External Flexible Cords )	-	2000	-
Cl. 25.13(Supply Connection and External Flexible Cords )	-	2000	-
Cl.25.14 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	2000	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	2000	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	2000	-
Cl.25.17 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	2000	-
Cl.25.18(Supply Connection and External Flexible Cords )	-	2000	-
Cl.25.20(Supply Connection and External Flexible Cords )	-	2000	-
Cl.26.10 of IS 302-1:2008(Terminal for External Conductors )	-	2000	-
Cl.26.11 of IS 302-1:2008(Terminal for External Conductors )	-	2000	-
Cl.27.5 of 302-1:2008(Provision for Earthing.)	-	2000	-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	2500	-
Cl.30.2.2 of 302-1:2008(Resistance to Heat and Fire)	-	4000	-
Cl.31 of IS:302-1:2008(Resistance to Rusting.)	-	2500	-
Cl.30.2 of 302-1:2008(Resistance to Heat and Fire : Resistance to fire)	-	4000	-
Cl.30.1 of IS:302-1:2008(Resistance to Heat and Fire: Resistance to heat. )	-	4000	-
Cl.29.2 of IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage Distance)	-	2500	-
Cl.29.1 of IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance )	-	2500	-
Cl.28 of 302-1:2008(Screws and Connections.)	-	2000	-
Cl.27.5 of 302-1:2008(Provision for Earthing : ECR)	-	2000	-
Cl.27.1 of 302-1:2008(Provision for Earthing )	-	2000	-
Cl.26 of IS 302-1:2008(Terminal for External Conductors )	-	2000	-
Cl.25.20 of 302-1:2008(Supply Connection and External Flexible Cords : Additional insulation )	-	2000	-
Cl.25.18 of 302-1:2008(Supply Connection and External Flexible Cords : Arrangement of cord anchorages )	-	2000	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords : Cord grip test - displacement)	-	2000	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords : Cord grip test - strain at terminals )	-	2000	-
Cl. 25.13 of 302-1:2008(Supply Connection and External Flexible Cords : Inlet opening of supply cords )	-	2000	-
Cl. 25.12 of 302-1:2008(Supply Connection and External Flexible Cords : Moulding of cords )	-	2000	-
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords : Colour of earthing wire )	-	2000	-
Cl. 25.9 of 302-1:2008(Supply Connection and External Flexible Cords : Contact with sharp edge )	-	2000	-
Cl.25.8 of 302-1:2008(Supply Connection and External Flexible Cords : Resistance of supply wires )	-	2000	-
Cl.25.7 of IS:302-2-30:2007(Supply Connection and External Flexible Cords : Supply cords material )	-	2000	-
Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords : Type of attachments )	-	2000	-
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords : Means of connection )	-	2000	-
Cl.24 of IS:302-2-30:2007(Component)	-	2000	-
Cl.23.7 of 302-1:2008(Internal Wiring : Colour of earting conductor )	-	2000	-
Cl.23 of IS:302-1:2008(Internal Wiring )	-	2000	-
Cl.22.106 of IS:302-2-30:2007(Construction : Checking of thermostats, timers or similar means for visibl glowing radiant heaters)	-	2000	-
Cl.22.106 of IS:302-2-30:2007(Construction : Checking of openings on the underside)	-	2000	-
Cl.22.102 & Cl 22.103 of IS:302-2-30:2007(Construction : Fireguard )	-	2000	-
Cl.22.101 of IS:302-2-30:2007(Construction : Prevention to contact with heating element)	-	2000	-
Cl.22.24 of IS:302-2-30:2007(Construction : test of bare heating element)	-	2000	-
Cl.22.18 of IS 302-1:2008(Construction : Resistance to corrosion )	-	2000	-
Cl.22.14 of IS 302-1:2008(Construction : ragged and sharp edges)	-	2000	-
Cl.22.13 of IS 302-1:2008(Construction : Position of handles )	-	2000	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knobs,grips,lever and similer parts )	-	2000	-
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable parts )	-	2000	-
Cl.22.7 of IS:302-2-30:2007(Construction : Pressure test of oil heater )	-	2000	-
Cl.21.101 of IS:302-2-30:2007(Mechanical Strength : fire gaurd deformation test )	-	2000	-
Cl.21.2 of IS 302-1:2008(Mechanical Strength : Pentration by sharp implementation )	-	2000	-
Cl.21.1 of IS:302-1:2008)(Mechanical Strength : Rough handling )	-	2000	-
Cl.20 of IS:302-2-30:2007(Stability of Mechanical Hazards)	-	5000	-
Cl.19.114 of IS:302-2-30:2007(Abnormal Operation : the temp. of the surface of the container for oil heaters )	-	2000	-
Cl.19.112 of IS:302-2-30:2007(Abnormal Operation : Ignition of bleached cotton gauge)	-	2000	-
Cl.19.111 of IS:302-2-30:2007(Abnormal Operation : Ignition of flannelette for Visibly glowing heaters)	-	2000	-
Cl.19.110 of IS:302-2-30:2007(Abnormal Operation : operation against wall for visibly glowing radiant heaters )	-	2000	-
Cl.19.109 of IS:302-2-30:2007(Abnormal Operation : operation against wall for fan heater )	-	2000	-
Cl.19.106 of IS:302-2-30:2007(Abnormal Operation : Locked rotor of fan hetear )	-	2000	-
Cl.19.103 , Cl 19.104 of IS:302-2-30:2007(Abnormal Operation : Operation after Covering by cotton)	-	2000	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : High Voltage )	-	2000	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : temp rise of supply cord )	-	2000	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : Temp rise of test corner )	-	2000	-
Cl.19 of IS:302-1:2008(Abnormal Operation : Emission of molten or poisonous or ignitable gas)	-	2000	-
Cl.15 of IS 302-1:2008(Moisture Resistance )	-	4000	-
Cl.14 of IS:302-1:2008(Transient Over Voltages)	-	2000	-
Cl.13 of IS:302-1:2008(Leakage Current of Electric Strength at operating temp. )	-	4000	-
Cl.13 of IS:302-1:2008(Leakage Current of Electric Strength at operating temp. )	-	4000	-
Cl.11 of IS:302-2:30: 2007(Heating : Room temperature)	-	3000	-
Cl.11.8 of IS:302-2:30: 2007(Heating : For liquid filled radiators the temp. rise of the outer surface of the liquid container)	-	3000	-
Cl.11 of IS:302-2:30: 2007(Heating : Air-outlet grills)	-	3000	-
Cl.11 of IS:302-2:30: 2007(Heating : Surfaces of handles, knobs, grips and similar parts)	-	3000	-
Cl.11 of IS:302-2:30: 2007(Heating : Wooden supports, walls, ceiling and floor of the test corner)	-	3000	-
Cl.11 of IS:302-2:30: 2007(Heating : PVC Insulation )	-	3000	-
Cl.10 of IS:302-1:2008(Power Input and Current)	-	2500	-
Cl.8 of IS:302-1:2008(Protection Against Access to Live Parts)	-	2500	-
Cl.7.101 of IS:302-2:30: 2007(Marking and Instructions : standard mark. )	-	2000	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions : Visibility of marking concerning covering)	-	2000	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions : discernibility from the out side )	-	2000	-
Cl.7.14 of IS:302-2:30: 2007(Marking and Instructions : Height of “Do not cover”)	-	2000	-
Cl.7.14 of IS:302-2:30: 2007(Marking and Instructions : height of symbol)	-	2000	-
Cl.7.13 of IS 302-1:2008(Marking and Instructions : Languge of instruction and texts )	-	2000	-
Cl.7.11 of IS :302-1:2008(Marking and Instructions : Controls )	-	2000	-
Cl.7.9 of IS :302-1:2008(Marking and Instructions : switches )	-	2000	-
Cl.7.8 of IS :302-1:2008(Marking and Instructions : terminals )	-	2000	-
Cl.7.6 of IS:302-1:2008(Marking and Instructions : Symbols )	-	2000	-
Cl.7.5 of IS:302-1:2008(Marking and Instructions : upper of lower limit of the rated power input )	-	2000	-
Cl 7.1 & Cl.7.6 of IS:302-2:30: 2007(Marking and Instructions : Do not cover )	-	2000	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Country of manufacture )	-	2000	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Symbol for Class-II )	-	2000	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : rated power input )	-	2000	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Nature of supply )	-	2000	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Rated Voltage )	-	2000	-

Complete

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

Upto 32mm

10756 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Carbon-IS 228)	-	3795	-
Cl 5(Deformations and Surface Characteristics)	-	2195	-
Cl 7.2(Weight)	-	520	-
Cl 8.1(UTM)	-	1444	Tensile Test
Cl 9.3(Load In One Direction)	-	1358	Bend Test
Cl 9.4(Load In Other Direction From Bend)	-	1444	Rebend Test

Complete

IS 302 : Part 2 : Sec 14 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 14 electric kitchen machines (First Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Marking- IS 302-1)	-	2000	-
8( Protection Against Electric Shock, IS 302-1)	-	2500	-
10(Power Input and Current, IS 302-1)	-	2500	-
11(Heating, IS 302-1)	-	3000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	4000	-
14(Transient Over Voltages, IS 302-1)	-	2000	-
15.2(Moisture Resistance, IS 302-1)	-	4000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	4000	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	2000	-
19.1(Abnormal Operation, IS 302-1)	-	2000	-
21.1(Mechanical Strength, IS 302-1)	-	5000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
26(Terminals for External Conductors, IS 302-1)	-	2000	-
27(Provision for Earthing, IS 302-1)	-	2000	-
28(Screws & Connections, IS 302-1)	-	2000	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	4000	-
31(Resistance of Rusting, IS 302-1)	-	2500	-
20.115(Stability & Mechanical Hazards)	-	5000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	2000	-
22(Construction, IS 302-1)	-	2000	-
23.1(Internal Wiring, IS 302-1)	-	2000	-
24.1(Components, IS 302-1)	-	2000	-
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	2000	-
6(Classification- IS 302-1 )	-	1000	-
6(Classification- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.3(Marking- IS 302-1)	-	2000	-
7.4(Marking- IS 302-1)	-	2000	-
7.6(Marking- IS 302-1)	-	2000	-
7.7(Marking- IS 302-1)	-	2000	-
7.8(Marking- IS 302-1)	-	2000	-
7.11(Marking- IS 302-1)	-	2000	-
7.12(Marking- IS 302-1)	-	2000	-
7.13(Marking- IS 302-1)	-	2000	-
7.14(Marking- IS 302-1)	-	2000	-
7.15(Marking- IS 302-1)	-	2000	-
7.101(Marking)	-	2000	-
11(Heating, IS 302-1)	-	3000	-
11(Heating, IS 302-1)	-	3000	-
11(Heating, IS 302-1)	-	3000	-
11(Heating, IS 302-1)	-	3000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	4000	-
15(Moisture Resistance, IS 302-1)	-	4500	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	4000	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	2000	-
19.8(Abnormal Operation, IS 302-1)	-	2000	-
19.9(Abnormal Operation, IS 302-1)	-	2000	-
19.101(Abnormal Operation)	-	2000	-
19.102(Abnormal Operation)	-	2000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	5000	-
20.101(Stability & Mechanical Hazards)	-	5000	-
20.102(Stability & Mechanical Hazards)	-	5000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	5000	-
20.103(Stability & Mechanical Hazards)	-	5000	-
20.104(Stability & Mechanical Hazards)	-	5000	-
20.105(Stability & Mechanical Hazards)	-	5000	-
20.106(Stability & Mechanical Hazards)	-	5000	-
20.107(Stability & Mechanical Hazards)	-	5000	-
20.108(Stability & Mechanical Hazards)	-	5000	-
20.109(Stability & Mechanical Hazards)	-	5000	-
20.110(Stability & Mechanical Hazards)	-	5000	-
20.111(Stability & Mechanical Hazards)	-	5000	-
20.112(Stability & Mechanical Hazards)	-	5000	-
20.113(Stability & Mechanical Hazards)	-	5000	-
20.114(Stability & Mechanical Hazards)	-	5000	-
20.116(Stability & Mechanical Hazards)	-	5000	-
21.2(Mechanical Strength, IS 302-1)	-	5000	-
22.101(Construction)	-	2000	-
22.102(Construction)	-	2000	-
23.2(Internal Wiring, IS 302-1)	-	2000	-
23.3(Internal Wiring, IS 302-1)	-	2000	-
23.4(Internal Wiring, IS 302-1)	-	2000	-
23.5(Internal Wiring, IS 302-1)	-	2000	-
23.6(Internal Wiring, IS 302-1)	-	2000	-
23.7(Internal Wiring, IS 302-1)	-	2000	-
23.8(Internal Wiring, IS 302-1)	-	2000	-
23.9(Internal Wiring, IS 302-1)	-	2000	-
23.10(Internal Wiring, IS 302-1)	-	2000	-
24.2(Components, IS 302-1)	-	2000	-
24.5(Components, IS 302-1)	-	2000	-
24.6(Components, IS 302-1)	-	2000	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
27.2(Provision for Earthing, IS 302-1)	-	2000	-
27.3(Provision for Earthing, IS 302-1)	-	2000	-
27.4(Provision for Earthing, IS 302-1)	-	2000	-
27.5(Provision for Earthing, IS 302-1)	-	2000	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	2000	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	4000	-

Complete

IS 302 : Part 2 : Sec 15 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 15 appliances for heating liquids (First Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	2000	-
8(Protection against live parts)	-	2500	-
10(POWER INPUT AND CURRENT)	-	2500	-
11(HEATING)	-	3000	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	4000	-
14(TRANSIENT OVERVOLTAGES)	-	2000	-
15(MOISTURE RESISTANCE)	-	4000	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	4000	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	2000	-
19(ABNORMAL OPERATION)	-	2000	-
21(MECHANICAL STRENGTH)	-	5000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	2000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	2000	-
27(PROVISION FOR EARTHING)	-	2000	-
28(SCREWS AND CONNECTIONS)	-	2000	-
30(RESISTANCE TO HEAT AND FIRE)	-	4000	-
31(RESISTANCE TO RUSTING)	-	2500	-
20(STABILITY AND MECHANICAL HAZARDS)	-	5000	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	2000	-

Complete

Bureau of Indian Standards

The National Standards Body of India

MSME Testing Centre, New Delhi

Shaheed Capt. Gaur Marg, Okhla Phase -III, New Delhi, South East, Delhi, 110020

9910201527 dctc-nr@dcmsme.gov.in

Scope List