BIS - LIMS (Laboratory Information Management System)

Arihant Analytical Laboratory Pvt. Ltd., Sonipat

Plot No. 272, Sector-57, Phase-IV, HSIIDC Kundli, Sonipat Haryana, Sonipat, Sonipat, Haryana, 131028

9310022355 aalkundli@gmail.com

Scope List

Reset

48 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 13757 (1993)

Burnt Clay Fly Ash Building Bricks-specification

All Type

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(GENERAL QUALITY)	-	4000	-
6.1(Dimensions)	-	4000	-
6.2(Tolerances)	-	4000	-
7.1(Compressive Strength)	-	4000	-
7.2(Water Absorption)	-	4000	-
7.3(Efforescence)	-	4000	-
9(Marking)	-	4000	-

02 Jun, 2027

-
included w.e.f 15.09.2026

IS 4885 (1988)

Specification for sewer bricks (First Revision)

All Type

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Dimensions)	-	5000	-
3.2(Tolerances)	-	5000	-
3.3(Warpage)	-	5000	-
4(General Quality)	-	5000	-
5(Compressive Strength)	-	5000	-
6(Water Absorption)	-	5000	-
7(Efflorescence)	-	5000	-
9(Marking)	-	5000	-

02 Jun, 2027

-
included w.e.f 15.09.2026

IS 17154 (2024)

Battery Operated Motorized Tricycle — Specification

All type

34000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-9(Marking)	-	34000	-
Cl-9(Marking)	-	34000	-
8.5(v)Test for finish)	-	34000	-
8.4(iv) Brake test)	-	34000	-
8.3(iii) Static load)	-	34000	-
8.2(ii) Manoeuverability)	-	34000	-
8.1(i) Road Test)	-	34000	-
8(TESTS)	-	34000	-
7(Finish)	-	34000	-
6(Requirements)	-	34000	-
4(Shape and Dimensions)	-	34000	-
Cl-8.5(Test for Finish)	-	34000	-
Cl-8.4(Brake Test)	-	34000	-
Cl-8.3(Static Load Test)	-	34000	-
Cl-8.2(Manoeuvrability)	-	34000	-
Cl-8.1(Road Test)	-	34000	-
Cl-7(Foinish)	-	34000	-
Cl-6.15(Servicing and Adjustment)	-	34000	-
Cl-6.14(Accessories)	-	34000	-
Cl-6.12(Lubrication)	-	34000	-
Cl-6.11(Armrest)	-	34000	-
Cl-6.10(Tool Box)	-	34000	-
Cl-6.9(Rear Wheel Hub)	-	34000	-
Cl-6.8(Front Wheel Hub)	-	34000	-
Cl-6.7(Brakes)	-	34000	-
Cl-6.6(Mudguards)	-	34000	-
Cl-6.5(Wheel Rims)	-	34000	-
Cl-6.4(Tyres and Tubes)	-	34000	-
Cl-6.3(Driving Mechanism)	-	34000	-
Cl-6.2(Steering Handle Bar)	-	34000	-
Cl-6.1(Frame)	-	34000	-
Cl-5.7(Timber)	-	34000	-
Cl-5.6(metallic components)	-	34000	-
Cl-5.5(Spring Wire)	-	34000	-
Cl-5.4.3(Tool Box)	-	34000	-
Cl-5.4.2(Seat Walls)	-	34000	-
Cl-5.4.1(Foot Rest)	-	34000	-
Cl-5.3.2(Back Rest)	-	34000	-
Cl-5.3.1(Seat)	-	34000	-
Cl-5.2(Standard Tricycle Components)	-	34000	-
5(Material)	-	34000	-
Cl-4(Shape and dimensions)	-	34000	-
Cl-5.1(Tubing)	-	34000	-
Cl-9(Marking)	-	34000	-
Cl-9(Marking)	-	34000	-
8.5(v)Test for finish)	-	34000	-
8.4(iv) Brake test)	-	34000	-
8.3(iii) Static load)	-	34000	-
8.2(ii) Manoeuverability)	-	34000	-
8.1(i) Road Test)	-	34000	-
8(TESTS)	-	34000	-
7(Finish)	-	34000	-
6(Requirements)	-	34000	-
4(Shape and Dimensions)	-	34000	-
Cl-8.5(Test for Finish)	-	34000	-
Cl-8.4(Brake Test)	-	34000	-
Cl-8.3(Static Load Test)	-	34000	-
Cl-8.2(Manoeuvrability)	-	34000	-
Cl-8.1(Road Test)	-	34000	-
Cl-7(Foinish)	-	34000	-
Cl-6.15(Servicing and Adjustment)	-	34000	-
Cl-6.14(Accessories)	-	34000	-
Cl-6.12(Lubrication)	-	34000	-
Cl-6.11(Armrest)	-	34000	-
Cl-6.10(Tool Box)	-	34000	-
Cl-6.9(Rear Wheel Hub)	-	34000	-
Cl-6.8(Front Wheel Hub)	-	34000	-
Cl-6.7(Brakes)	-	34000	-
Cl-6.6(Mudguards)	-	34000	-
Cl-6.5(Wheel Rims)	-	34000	-
Cl-6.3(Driving Mechanism)	-	34000	-
Cl-6.2(Steering Handle Bar)	-	34000	-
Cl-6.1(Frame)	-	34000	-
Cl-5.7(Timber)	-	34000	-
Cl-5.6(metallic components)	-	34000	-
Cl-5.5(Spring Wire)	-	34000	-
Cl-5.4.3(Tool Box)	-	34000	-
Cl-5.4.2(Seat Walls)	-	34000	-
Cl-5.4.1(Foot Rest)	-	34000	-
Cl-5.3.2(Back Rest)	-	34000	-
Cl-5.3.1(Seat)	-	34000	-
Cl-5.2(Standard Tricycle Components)	-	34000	-
5(Material)	-	34000	-
Cl-4(Shape and dimensions)	-	34000	-
Cl-5.1(Tubing)	-	34000	-
Cl-6.4(Tyres and Tubes)	-	34000	-
Cl-9(Marking)	-	34000	-
Cl-9(Marking)	-	34000	-
8.5(v)Test for finish)	-	34000	-
8.4(iv) Brake test)	-	34000	-
8.3(iii) Static load)	-	34000	-
8.2(ii) Manoeuverability)	-	34000	-
8.1(i) Road Test)	-	34000	-
8(TESTS)	-	34000	-
7(Finish)	-	34000	-
6(Requirements)	-	34000	-
4(Shape and Dimensions)	-	34000	-
Cl-8.5(Test for Finish)	-	34000	-
Cl-8.4(Brake Test)	-	34000	-
Cl-8.3(Static Load Test)	-	34000	-
Cl-8.2(Manoeuvrability)	-	34000	-
Cl-8.1(Road Test)	-	34000	-
Cl-7(Foinish)	-	34000	-
Cl-6.15(Servicing and Adjustment)	-	34000	-
Cl-6.14(Accessories)	-	34000	-
Cl-6.12(Lubrication)	-	34000	-
Cl-6.11(Armrest)	-	34000	-
Cl-6.10(Tool Box)	-	34000	-
Cl-6.9(Rear Wheel Hub)	-	34000	-
Cl-6.8(Front Wheel Hub)	-	34000	-
Cl-6.7(Brakes)	-	34000	-
Cl-6.6(Mudguards)	-	34000	-
Cl-6.5(Wheel Rims)	-	34000	-
Cl-6.3(Driving Mechanism)	-	34000	-
Cl-6.2(Steering Handle Bar)	-	34000	-
Cl-6.1(Frame)	-	34000	-
Cl-5.7(Timber)	-	34000	-
Cl-5.6(metallic components)	-	34000	-
Cl-5.5(Spring Wire)	-	34000	-
Cl-5.4.3(Tool Box)	-	34000	-
Cl-5.4.2(Seat Walls)	-	34000	-
Cl-5.4.1(Foot Rest)	-	34000	-
Cl-5.3.2(Back Rest)	-	34000	-
Cl-5.3.1(Seat)	-	34000	-
Cl-5.2(Standard Tricycle Components)	-	34000	-
5(Material)	-	34000	-
Cl-4(Shape and dimensions)	-	34000	-
Cl-5.1(Tubing)	-	34000	-
Cl-6.4(Tyres and Tubes)	-	34000	-
Cl-9(Marking)	-	34000	-
Cl-9(Marking)	-	34000	-
8.5(v)Test for finish)	-	34000	-
8.4(iv) Brake test)	-	34000	-
8.3(iii) Static load)	-	34000	-
8.2(ii) Manoeuverability)	-	34000	-
8.1(i) Road Test)	-	34000	-
8(TESTS)	-	34000	-
7(Finish)	-	34000	-
6(Requirements)	-	34000	-
4(Shape and Dimensions)	-	34000	-
Cl-8.5(Test for Finish)	-	34000	-
Cl-8.4(Brake Test)	-	34000	-
Cl-8.3(Static Load Test)	-	34000	-
Cl-8.2(Manoeuvrability)	-	34000	-
Cl-8.1(Road Test)	-	34000	-
Cl-7(Foinish)	-	34000	-
Cl-6.15(Servicing and Adjustment)	-	34000	-
Cl-6.14(Accessories)	-	34000	-
Cl-6.12(Lubrication)	-	34000	-
Cl-6.11(Armrest)	-	34000	-
Cl-6.10(Tool Box)	-	34000	-
Cl-6.9(Rear Wheel Hub)	-	34000	-
Cl-6.8(Front Wheel Hub)	-	34000	-
Cl-6.7(Brakes)	-	34000	-
Cl-6.6(Mudguards)	-	34000	-
Cl-6.5(Wheel Rims)	-	34000	-
Cl-6.3(Driving Mechanism)	-	34000	-
Cl-6.2(Steering Handle Bar)	-	34000	-
Cl-6.1(Frame)	-	34000	-
Cl-5.7(Timber)	-	34000	-
Cl-5.6(metallic components)	-	34000	-
Cl-5.5(Spring Wire)	-	34000	-
Cl-5.4.3(Tool Box)	-	34000	-
Cl-5.4.2(Seat Walls)	-	34000	-
Cl-5.4.1(Foot Rest)	-	34000	-
Cl-5.3.2(Back Rest)	-	34000	-
Cl-5.3.1(Seat)	-	34000	-
Cl-5.2(Standard Tricycle Components)	-	34000	-
5(Material)	-	34000	-
Cl-4(Shape and dimensions)	-	34000	-
Cl-5.1(Tubing)	-	34000	-
Cl-6.4(Tyres and Tubes)	-	34000	-

02 Jun, 2027

-
included w.e.f 17.08.2026

IS 740 (1977)

Specification for wrought aluminium and aluminium alloy rivet stock for general engineering purposes (Second Revision)

All Type

10000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1, Table 1of IS:740 (Designation & Condition 65032, 'W')(Tensile Strength of Size upto and including 25 mm)	-	10000.00	-
4.1, Table 1of IS:740 (Designation & Condition 64430, 'W')(Tensile Strength of Size upto and including 25 mm)	-	10000.00	-
4.1, Table 1of IS:740 (Designation & Condition 55000, 'OD')(Tensile Strength of Size upto and including 25 mm)	-	10000.00	-
4.1, Table 1of IS:740 (Designation & Condition 55000, 'O or M')(Tensile Strength of Size upto and including 25 mm)	-	10000.00	-
4.1, Table 1of IS:740 (Designation & Condition 53000, 'OD')(Tensile Strength of Size upto and including 25 mm)	-	10000.00	-
4.1, Table 1of IS:740 (Designation & Condition 53000, 'O or M')(Tensile Strength of Size upto and including 25 mm)	-	10000.00	-
4.1, Table 1of IS:740 (Designation & Condition 24345, 'W')(Tensile Strength of Size upto and including 12 mm)	-	10000.00	-
4.1, Table 1of IS:740 (Designation & Condition 19000, '112')(Tensile Strength of Size upto and including 12 mm)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 65032)(Aluminium)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 65032)(Either Cr or Mn shall present)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 65032)(Chromium)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 65032)(Titanium and or other grain refining elements)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 65032)(Zinc)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 65032)(Manganese)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 65032)(Iron)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 65032)(Silicon)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 65032)(Magnesium)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 65032)(Copper)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 64430)(Aluminium)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 64430)(Cr+Mn)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 64430)(Chromium)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 64430)(Titanium and or other grain refining elements)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 64430)(Zinc)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 64430)(Manganese)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 64430)(Iron)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 64430)(Silicon)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 64430)(Magnesium)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 64430)(Copper)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 55000)(Aluminium)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 55000)(Cr+Mn)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 55000)(Chromium)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 55000)(Titanium and or other grain refining elements)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 55000)(Zinc)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 55000)(Manganese)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 55000)(Iron)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 55000)(Silicon)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 55000)(Magnesium)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 55000)(Copper)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 53000)(Aluminium)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 53000)(Cr+Mn)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 53000)(Chromium)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 53000)(Titanium and or other grain refining elements)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 53000)(Zinc)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 53000)(Manganese)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 53000)(Iron)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 53000)(Silicon)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 53000)(Magnesium)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 53000)(Copper)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 24345)(Aluminium)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 24345)(Chromium)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 24345)(Titanium and or other grain refining elements)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 24345)(Zinc)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 24345)(Manganese)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 24345)(Iron)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 24345)(Silicon)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 24345)(Magnesium)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 24345)(Copper)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 19000)(Cu+Mg+Si+Fe+Mn+Zn)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 19000)(Aluminium)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 19000)(Zinc)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 19000)(Manganese)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 19000)(Iron)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 19000)(Silicon)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 19000)(Magnesium)	-	10000.00	-
4.1, Table 1of IS:740 (Designation 19000)(Copper)	-	10000.00	-
6(Freedom From Defects)	-	10000.00	-
7(Dmension And Tolerances)	-	10000.00	-
9.2(Head Forming Test)	-	10000.00	-
11(Marking)	-	10000.00	-

02 Jun, 2027

-
Included w.e.f. 17.08.2026

IS 734 (1975)

Specification for wrought aluminium and aluminium alloy forging stock and forgings (For General Engineering Purposes) (Second Revision)

All Type

12000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1 table 1(chemical composition)	-	12000.00	-
5.1 table 2(0.2% proof strength)	-	12000.00	-
5.1 table 2(Tensile strength)	-	12000.00	-
5.1 table 2(Elongation)	-	12000.00	-
Cl.5.1(Aluminium - IS 504 and its parts or any other intrumental/chemical methods)	-	12000.00	-
Cl.5.1(Copper - IS 504 and its parts or any other intrumental/chemical methods)	-	12000.00	-
Cl.5.1(Magnesium - IS 504 and its parts or any other intrumental/chemical methods)	-	12000.00	-
Cl.5.1(Silicon - IS 504 and its parts or any other intrumental/chemical methods)	-	12000.00	-
Cl.5.1(Iron - IS 504 and its parts or any other intrumental/chemical methods)	-	12000.00	-
Cl.5.1(Manganese - IS 504 and its parts or any other intrumental/chemical methods)	-	12000.00	-
Cl.5.1(Zinc - IS 504 and its parts or any other intrumental/chemical methods)	-	12000.00	-
Cl.5.1(Titanium And/or Other Grain Refining Elements - IS 504 and its parts or any other intrumental/chemical methods)	-	12000.00	-
Cl.5.1(Chromium - IS 504 and its parts or any other intrumental/chemical methods)	-	12000.00	-
Cl.5.1(Remarks (Cu + Mg + Si + Fe + Mn + Zn) - IS 504 and its parts or any other intrumental/chemical methods)	-	12000.00	-
4.1(Freedom from defects)	-	12000.00	-
9.1(Tensile test)	-	12000.00	-

02 Jun, 2027

-
Included w.e.f. 17.08.2026

IS 15997 (2012)

Low nickel austenitic stainless steel sheet and strip for utensils and kitchen appliances - Specification

All Type

8000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 8.1, 8.1.1 & 10.1 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	8000.00	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	8000.00	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	8000.00	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	8000.00	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	8000.00	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	8000.00	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	8000.00	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Copper -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	8000.00	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	8000.00	-
6(Freedom From Defects)	-	8000.00	-
9.3(Tensile Test-1608:Part 1)	-	8000.00	-
9.3, Table 3 (Yield Strength, Mpa)	-	8000.00	-
9.3, Table 3 (Tensile Strength, Mpa)	-	8000.00	-
9.3, Table 3 (Elongation, %)	-	8000.00	-
9.4(Erichsen Cupping Test,(Average depth of cupping) mm)	-	8000.00	-
11(Surface finish)	-	8000.00	-
12(Dimensions)	-	8000.00	-
14.1(Thickness,mm)	-	8000.00	-
14.2( Width, mm)	-	8000.00	-
14.3(Length, mm)	-	8000.00	-
14.4(Flatness, mm)	-	8000.00	-
14.5(Camber, mm)	-	8000.00	-
Clause 9.1, 9.2 & Table 3(IS 1608 Part 1)	-	8000.00	-
17(Marking)	-	8000.00	-
Clause 9.1, 9.2 & Table 3(0.2 Percent Yield Strength)	-	8000.00	-
4.1(General requirements)	-	8000.00	-
6(Freedom from defects)	-	8000.00	-
7(Heat treatment)	-	8000.00	-
8.1, table 1(C Si Mn Ni Cr S P Cu Ni)	-	8000.00	-
8.1.1, table 2(Carbon Silicon Manganese Nickel Chromium Sulphur Phosphorus Copper Nitrogen)	-	8000.00	-
9.1(Sample plan)	-	8000.00	-
9.2(Tensile test)	-	8000.00	-
9.3(Mechanical properties)	-	8000.00	-
9.4(Erichsen cupping test)	-	8000.00	-
10(Retests)	-	8000.00	-
11(Surface finish)	-	8000.00	-
12(Dimensions)	-	8000.00	-
13(Edge condition)	-	8000.00	-
14.1(Thickness)	-	8000.00	-
14.2.1(Mill Edge)	-	8000.00	-
14.2.2(Trimmed Edge)	-	8000.00	-
14.3(Length)	-	8000.00	-
14.4(Flatness)	-	8000.00	-
14.5(Camber)	-	8000.00	-
15(Inspection)	-	8000.00	-
17(Marking)	-	8000.00	-

02 Jun, 2027

-
Included w.e.f. 17.08.2026

IS 6911 (2017)

Stainless steel plate, sheet and strip - Specification (Second Revision)

All Type

15000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.1 & 7.2 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000.00	-
Cl. 7.1 & 7.2 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000.00	-
Cl. 7.1 & 7.2 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000.00	-
Cl. 7.1 & 7.2 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000.00	-
Cl. 7.1 & 7.2 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000.00	-
Cl. 7.1 & 7.2 Table 1(Molybdenum -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000.00	-
Cl. 7.1 & 7.2 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000.00	-
Cl. 7.1 & 7.2 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000.00	-
Cl. 7.1 & 7.2 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000.00	-
Cl. 7.1 & 7.2 Table 1(Copper -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000.00	-
Cl. 7.1 & 7.2 Table 1(Others-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000.00	-
Cl. 7.1 & 7.2 Table 1(Titanium-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000.00	-
Cl. 7.1 & 7.2 Table 1(Niobium-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000.00	-
Cl.12(Corrosion Resistance- IS 10461(Part1))	-	15000.00	-
Cl.12(Corrosion Resistance- IS 10461(Part2))	-	15000.00	-
6(Freedom from defects , IS 6911)	-	15000.00	-
10.1,Table 4&Table 6(Tensile Test - IS 1608(Pt -1))	-	15000.00	-
10.2,Table 4&Table 5(Hardness Test- IS 1500(Pt -1),IS 1501 (Pt-1),IS 1586 (Pt -1))	-	15000.00	-
10.3(Bend Test - IS 1599)	-	15000.00	-
11,Table 7(Erichsen cupping test-IS 10175)	-	15000.00	-
15(Surface Finish)	-	15000.00	-
17(Dimension and tolerance)	-	15000.00	-
10.1 Amd 2(Yeild Strength)	-	15000.00	-
10.1 Amd 2(0.2 Percent Proof Stress)	-	15000.00	-
10.1 Amd 2(Elongation)	-	15000.00	-
Clause 17 , Table 9 to Table 19(Dimension (Length))	-	15000.00	-
Clause 17 , Table 9 to Table 19(Dimension (Width))	-	15000.00	-
Clause 17 , Table 9 to Table 19(Dimension (Thickness))	-	15000.00	-
Clause 17 , Table 9 to Table 19(Flatness)	-	15000.00	-
Clause 17 , Table 9 to Table 19(Camber)	-	15000.00	-
Table 1(Any Instrumental Method/Chemical Method)	-	15000.00	-
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	15000.00	-
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	15000.00	-
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	15000.00	-
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	15000.00	-
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	15000.00	-
10.1 Amd 2(Yeild Strength)	-	15000.00	-
10.1 Amd 2(0.2 Percent Proof Stress)	-	15000.00	-
10.1 Amd 2(Elongation)	-	15000.00	-
Clause 17 , Table 9 to Table 19(Dimension (Length))	-	15000.00	-
Clause 17 , Table 9 to Table 19(Dimension (Width))	-	15000.00	-
Clause 17 , Table 9 to Table 19(Dimension (Thickness))	-	15000.00	-
Clause 17 , Table 9 to Table 19(Flatness)	-	15000.00	-
Clause 17 , Table 9 to Table 19(Camber)	-	15000.00	-
Table 1(Any Instrumental Method/Chemical Method)	-	15000.00	-
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	15000.00	-
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	15000.00	-
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	15000.00	-
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	15000.00	-
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	15000.00	-
10.1 Amd 2(Yeild Strength)	-	15000.00	-
10.1 Amd 2(0.2 Percent Proof Stress)	-	15000.00	-
10.1 Amd 2(Elongation)	-	15000.00	-
Clause 17 , Table 9 to Table 19(Dimension (Length))	-	15000.00	-
Clause 17 , Table 9 to Table 19(Dimension (Width))	-	15000.00	-
10.1 Amd 2(0.2 Percent Proof Stress)	-	15000.00	-
10.1 Amd 2(Yeild Strength)	-	15000.00	-
10.1 Amd 2(0.2 Percent Proof Stress)	-	15000.00	-
10.1 Amd 2(Elongation)	-	15000.00	-
10.1 Amd 2(Yeild Strength)	-	15000.00	-
Clause 17 , Table 9 to Table 19(Dimension (Length))	-	15000.00	-
Clause 17 , Table 9 to Table 19(Dimension (Width))	-	15000.00	-
Clause 17 , Table 9 to Table 19(Dimension (Thickness))	-	15000.00	-
Clause 17 , Table 9 to Table 19(Flatness)	-	15000.00	-
Clause 17 , Table 9 to Table 19(Camber)	-	15000.00	-
Table 1(Any Instrumental Method/Chemical Method)	-	15000.00	-
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	15000.00	-
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	15000.00	-
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	15000.00	-
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	15000.00	-
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	15000.00	-
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	15000.00	-
4(Supply of Material)	-	15000.00	-
8(Heat Treatment)	-	15000.00	-
19(Marking)	-	15000.00	-
5(Manufacture)	-	15000.00	-
10.1 Amd 2(Yeild Strength)	-	15000.00	-
10.1 Amd 2(0.2 Percent Proof Stress)	-	15000.00	-
10.1 Amd 2(Elongation)	-	15000.00	-
Clause 17 , Table 9 to Table 19(Dimension (Length))	-	15000.00	-
Clause 17 , Table 9 to Table 19(Dimension (Width))	-	15000.00	-
Clause 17 , Table 9 to Table 19(Dimension (Thickness))	-	15000.00	-
Clause 17 , Table 9 to Table 19(Flatness)	-	15000.00	-
Clause 17 , Table 9 to Table 19(Camber)	-	15000.00	-
Table 1(Alumium)	-	15000.00	-
Table 1, Amendment 2(Zirconium)	-	15000.00	-
Table 1, Amendment 2(Tungstun)	-	15000.00	-
Table 1, Amendment 2(Tungstun)	-	15000.00	-
Table 1, Amendment 2(Ce)	-	15000.00	-
Table 1, Amendment 2(Cobalt)	-	15000.00	-
Table 1, Amendment 2(Ta)	-	15000.00	-
5.1 - 1(Carbon)	-	15000.00	-
5.1 - 1(Sulphur)	-	15000.00	-
5.1 - 1(Phosphorus)	-	15000.00	-
5.1 - 1(Manganese)	-	15000.00	-
5.1 - 1(Silicon)	-	15000.00	-
5.1 - 1(Nitrogen)	-	15000.00	-
5.1 - 1(Copper)	-	15000.00	-
5.1 - 1(Titanium)	-	15000.00	-
5.1 - 1(Aluminium)	-	15000.00	-
5.1 - 1(Niobium)	-	15000.00	-
5.1 - 1(Nickel)	-	15000.00	-
5.1 - 1(Chromium)	-	15000.00	-
5.1 - 1(Molybdenum)	-	15000.00	-
6(Freedom from defect)	-	15000.00	-
10.1 - 4(Tensile Test)	-	15000.00	-
10.1 - 4(Yield strength)	-	15000.00	-
10.1 - 4(Elongation % on 50mm)	-	15000.00	-
10.2(Hardness Test)	-	15000.00	-
10.3(Bend Test)	-	15000.00	-
11(Erichsen Cupping Test)	-	15000.00	-
17(Dimension and tolerance)	-	15000.00	-
12(Corrosion resistance)	-	15000.00	-
5.1 - 1(Carbon)	-	15000.00	-
5.1 - 1(Sulphur)	-	15000.00	-
5.1 - 1(Phosphorus)	-	15000.00	-
5.1 - 1(Manganese)	-	15000.00	-
5.1 - 1(Silicon)	-	15000.00	-
5.1 - 1(Nitrogen)	-	15000.00	-
5.1 - 1(Copper)	-	15000.00	-
5.1 - 1(Titanium)	-	15000.00	-
5.1 - 1(Aluminium)	-	15000.00	-
5.1 - 1(Niobium)	-	15000.00	-
5.1 - 1(Nickel)	-	15000.00	-
5.1 - 1(Chromium)	-	15000.00	-
5.1 - 1(Molybdenum)	-	15000.00	-
6(Freedom from defect)	-	15000.00	-
10.1 - 4(Tensile Test)	-	15000.00	-
10.1 - 4(Yield strength)	-	15000.00	-
10.1 - 4(Elongation % on 50mm)	-	15000.00	-
10.2(Hardness Test)	-	15000.00	-
10.3(Bend Test)	-	15000.00	-
11(Erichsen Cupping Test)	-	15000.00	-
17(Dimension and tolerance)	-	15000.00	-
12(Corrosion resistance)	-	15000.00	-

02 Jun, 2027

-
Included w.e.f. 17.08.2026

IS 5522 (2014)

Stainless steel sheets and strips for utensils - Specification (Third Revision)

All Type

7500.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.1 & 7.2 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	7500.00	-
Cl. 7.1 & 7.2 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	7500.00	-
Cl. 7.1 & 7.2 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	7500.00	-
Cl. 7.1 & 7.2 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	7500.00	-
Cl. 7.1 & 7.2 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	7500.00	-
Cl. 7.1 & 7.2 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	7500.00	-
Cl. 7.1 & 7.2 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	7500.00	-
8.2, Table 3(Tensile Test-1608:Part 1)	-	7500.00	-
8.2, Table 3(Proof Stress, N/mm2)	-	7500.00	-
8.2, Table 3(Tensile Strength, N/mm2)	-	7500.00	-
8.2, Table 3(Elongation, %)	-	7500.00	-
8.3(Hardness , max-IS 1500 or IS 1501 (Part 1) or IS 1586)	-	7500.00	-
8.4(Bend Test)	-	7500.00	-
8.5(Erichsen Cupping Test)	-	7500.00	-
10.1(Thickness, mm)	-	7500.00	-
10.2(width, mm)	-	7500.00	-
10.3(Length, mm)	-	7500.00	-
10.4(Flatness,mm)	-	7500.00	-
10.5(Camber, mm)	-	7500.00	-
11(Surface Finish)	-	7500.00	-
Cl . 6 .0(Freedom from defect)	-	7500.00	-
13(Marking)	-	7500.00	-
Cl. 7.1 & 7.2 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	7500.00	-

02 Jun, 2027

-
Included w.e.f. 17.03.2026

IS 21 (2025)

Wrought Aluminium and Aluminium Alloys for Manufacture of Utensils - Specification (Fifth Revision)

All Type

8000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General requirements)	-	8000.00	-
Cl-5.1(Material)	-	8000.00	-
Cl-5.2(Chemical composition and mechanical properties of grades in Cl 5.1)	-	8000.00	-
Cl-5.3.1 a("Wrought Aluminium (with Minimum 99 Percent Al Content)- Iron+ Silicon")	-	8000.00	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Chromium")	-	8000.00	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Magnesium")	-	8000.00	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Manganese")	-	8000.00	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Nickel")	-	8000.00	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Zinc")	-	8000.00	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Titanium")	-	8000.00	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Tin")	-	8000.00	-
Cl-5.3.1 c("Wrought Aluminium (with Minimum 99 Percent Al Content)- Copper")	-	8000.00	-
Cl-5.3.1 Note 1("Wrought Aluminium (with Minimum 99 Percent Al Content)- Aluminium")	-	8000.00	-
Cl-5.3.1 d("Wrought Aluminium (with Minimum 99 Percent Al Content)- Others")	-	8000.00	-
Cl-5.3.2, Table-1 (i)(Wrought Aluminium Alloys-Silicon)	-	8000.00	-
Cl-5.3.2, Table-1 (ii)(Wrought Aluminium Alloys-Iron)	-	8000.00	-
Cl-5.3.2, Table-1 (iii)(Wrought Aluminium Alloys-Copper)	-	8000.00	-
Cl-5.3.2, Table-1 (iv)(Wrought Aluminium Alloys-Manganese)	-	8000.00	-
Cl-5.3.2, Table-1 (v)(Wrought Aluminium Alloys-Magnesium)	-	8000.00	-
Cl-5.3.2, Table-1 (vi)(Wrought Aluminium Alloys-Chromium)	-	8000.00	-
Cl-5.3.2, Table-1 (vii)(Wrought Aluminium Alloys-Nickel)	-	8000.00	-
Cl-5.3.2, Table-1 (viii)(Wrought Aluminium Alloys-Zinc)	-	8000.00	-
Cl-5.3.2, Table-1 (ix)(Wrought Aluminium Alloys -Zirconium)	-	8000.00	-
Cl-5.3.2, Table-1 (x)(Wrought Aluminium Alloys - Titanium)	-	8000.00	-
Cl-5.3.2, Table-1 (Note 3)(Wrought Aluminium Alloys- Aluminium)	-	8000.00	-
Cl-5.3.2, Table-1 (xi)(Wrought Aluminium Alloys- Others)	-	8000.00	-
Cl 5.4(Lead)	-	8000.00	-
Cl 5.4(Cadmium)	-	8000.00	-
Cl 5.4(Arsenic)	-	8000.00	-
Cl-7(Dimension)	-	8000.00	-
Cl-8(EARING TEST (OPTIONAL TEST))	-	8000.00	-
Cl-5.2, (Cl-8,Table 2 of IS 737)(0.2% Proof Stress)	-	8000.00	-
Cl-5.2, (Cl-8,Table 2 of IS 737)(Tensile Strength)	-	8000.00	-
Cl-5.2, (Cl-8,Table 2 of IS 737)(Elongation)	-	8000.00	-
Cl-5.2, (Cl-8,Table 2 of IS 737)(Bend Test)	-	8000.00	-

02 Jun, 2027

-
Included w.e.f. 17.03.2026

IS 16415 (2015)

Composite cement - Specification

All Type

15500.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Chemical Requirements)	-	15500.00	-
7(Physical Requirement)	-	15500.00	-
6 -Table - 2 i(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	15500.00	-
6 -Table - 2 ii(Magnesia - Cl 4.8 of IS 4032:1985)	-	15500.00	-
6 -Table - 2 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	15500.00	-
6 -Table - 2 iv(Sulphide sulphur (S) - Cl 6.12 of IS 4032:1985)	-	15500.00	-
6 -Table - 2 v(Loss on ignition - Cl 4.2 of IS 4032:1985)	-	15500.00	-
6 -Table - 2 vi(Chloride content - Cl 4.13 of IS 4032:1985)	-	15500.00	-
7 and Table 3 i(Fineness IS 4031(Part 2))	-	15500.00	-
7 and Table 3 ii a(Soundness, Le-Chate1ier expansion IS 4031(Part 3) )	-	15500.00	-
7 and Table 3 ii b(Soundness, Autoclave expansion IS 4031(Part 3) )	-	15500.00	-
7 and Table 3 iii a(Setting Time ( by Vicat Apparatus), Initial IS 4031(Part 5))	-	15500.00	-
7 and Table 3 iii b(Setting Time ( by Vicat Apparatus ), Final IS 4031(Part 5))	-	15500.00	-
7 and Table 3 iv a(Compretsive Strenqth .72 ± 1 hr IS 4031(Part 6))	-	15500.00	-
7 and Table 3 iv b(Compretsive Strenqth 168 ± 2 hr IS 4031(Part 6))	-	15500.00	-
7 and Table 3 iv c(Compretsive Strenqth 672 ± 4 hr IS 4031(Part 6))	-	15500.00	-
7 and Table 3 v(Drying shrinkage IS 4031(Part 10))	-	15500.00	-
7 and Table 3 vi(Transverse strength (optional) IS 4031(Part 8) )	-	15500.00	-
6 -Table - 2 i(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	15500.00	-
6 -Table - 2 ii(Magnesia - Cl 4.8 of IS 4032:1985)	-	15500.00	-
6 -Table - 2 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	15500.00	-
6 -Table - 2 iv(Sulphide sulphur (S) - Cl 6.12 of IS 4032:1985)	-	15500.00	-
6 -Table - 2 v(Loss on ignition - Cl 4.2 of IS 4032:1985)	-	15500.00	-
6 -Table - 2 vi(Chloride content - Cl 4.13 of IS 4032:1985)	-	15500.00	-
7 and Table 3 i(Fineness IS 4031(Part 2))	-	15500.00	-
7 and Table 3 ii a(Soundness, Le-Chate1ier expansion IS 4031(Part 3) )	-	15500.00	-
7 and Table 3 ii b(Soundness, Autoclave expansion IS 4031(Part 3) )	-	15500.00	-
7 and Table 3 iii a(Setting Time ( by Vicat Apparatus), Initial IS 4031(Part 5))	-	15500.00	-
7 and Table 3 iii b(Setting Time ( by Vicat Apparatus ), Final IS 4031(Part 5))	-	15500.00	-
7 and Table 3 iv a(Compretsive Strenqth .72 ± 1 hr IS 4031(Part 6))	-	15500.00	-
7 and Table 3 iv b(Compretsive Strenqth 168 ± 2 hr IS 4031(Part 6))	-	15500.00	-
7 and Table 3 iv c(Compretsive Strenqth 672 ± 4 hr IS 4031(Part 6))	-	15500.00	-
7 and Table 3 v(Drying shrinkage IS 4031(Part 10))	-	15500.00	-
7 and Table 3 vi(Transverse strength (optional) IS 4031(Part 8) )	-	15500.00	-
Cl. 6.1,Table 2(Alkali content)	-	15500.00	-
Cl. 6.1,Table 2(Chloride content)	-	15500.00	-
Cl. 6.1,Table 2(Loss on ignition)	-	15500.00	-
Cl. 6.1,Table 2(Suilphide sulphur)	-	15500.00	-
Cl. 6.1,Table 2(Total sulphur content calculated as sulphuric anhydride)	-	15500.00	-
Cl. 6.1,Table 2(Magnesia)	-	15500.00	-
Cl. 6.1,Table 2(Insoluble residue)	-	15500.00	-

02 Jun, 2027

-
Included w.e.f. 02.03.2026

IS 8042 (2015)

White portland cement - Specification (Third Revision)

All Type

8200.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	8200.00	-
5 - Table - 1 ii(Iron oxide - Cl 4.5 of IS 4032:1985)	-	8200.00	-
5 - Table - 1 iii(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	8200.00	-
5 - Table - 1 iv(Magnesia - Cl 4.8 of IS 4032:1985)	-	8200.00	-
5 - Table - 1 v(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	8200.00	-
5 - Table - 1 vi(Loss on ignition - Cl 4.2 of IS 4032:1985)	-	8200.00	-
5 - Table - 1 vii(Chloride content - Cl 4.13 of IS 4032:1985)	-	8200.00	-
6 -Table 2- i(Fineness 4031 Part 2)	-	8200.00	-
6 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	8200.00	-
6 -Table 2- ii- a(Expansion after aeration - 4031 Part 3)	-	8200.00	-
6 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	8200.00	-
6-Table 2- ii- b(Expansion after aeration- 4031 Part 3)	-	8200.00	-
6 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	8200.00	-
6 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	8200.00	-
6 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	8200.00	-
6 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	8200.00	-
6 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	8200.00	-
6 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	8200.00	-
6 -Table 2- vi(Degree of whiteness-Annex B)	-	8200.00	-
5 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	8200.00	-
5 - Table - 1 ii(Iron oxide - Cl 4.5 of IS 4032:1985)	-	8200.00	-
5 - Table - 1 iii(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	8200.00	-
5 - Table - 1 iv(Magnesia - Cl 4.8 of IS 4032:1985)	-	8200.00	-
5 - Table - 1 v(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	8200.00	-
5 - Table - 1 vi(Loss on ignition - Cl 4.2 of IS 4032:1985)	-	8200.00	-
5 - Table - 1 vii(Chloride content - Cl 4.13 of IS 4032:1985)	-	8200.00	-
6 -Table 2- i(Fineness 4031 Part 2)	-	8200.00	-
6 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	8200.00	-
6 -Table 2- ii- a(Expansion after aeration - 4031 Part 3)	-	8200.00	-
6 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	8200.00	-
6-Table 2- ii- b(Expansion after aeration- 4031 Part 3)	-	8200.00	-
6 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	8200.00	-
6 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	8200.00	-
6 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	8200.00	-
6 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	8200.00	-
6 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	8200.00	-
6 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	8200.00	-
6 -Table 2- vi(Degree of whiteness-Annex B)	-	8200.00	-
6, table-2, ii(Whiteness)	-	8200.00	-
Clause 6 Table 2, SI No. (v) (Compressive strength of Transverse Specimen, 672 ± 4 h)	-	8200.00	-
Clause 6 Table 2, SI No. (v) (Compressive strength of Transverse Specimen, 168 ± 2 h)	-	8200.00	-
Clause 6 Table 2, SI No. (v) (Compressive strength of Transverse Specimen, 72 ± 1 h)	-	8200.00	-
Clause 6 Table 2, SI No. (v) (Transverse Strength, 672 ± 4 h)	-	8200.00	-
Clause 6 Table 2, SI No. (v) (Transverse Strength, 168 ± 2 h)	-	8200.00	-
Clause 6 Table 2, SI No. (v) (Transverse Strength, 72 ± 1 h)	-	8200.00	-

02 Jun, 2027

-
Included w.e.f. 02.03.2026

IS 455 (2015)

Portland slag cement - Specification

All Type

8200.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 Table 1 v(Transverse strength (optional) IS 4031(Part 8) )	-	8200.00	-
7 Table 1 iv c(Compretsive Strenqth 672 ± 4 hr IS 4031(Part 6))	-	8200.00	-
7 Table 1 iv b(Compretsive Strenqth 168 ± 2 hr IS 4031(Part 6))	-	8200.00	-
7 Table 1 iv a(Compretsive Strenqth .72 ± 1 hr IS 4031(Part 6))	-	8200.00	-
7 Table 1 iii b(Setting Time ( by Vicat Apparatus ), Final IS 4031(Part 5))	-	8200.00	-
7 Table 1 iii a(Setting Time ( by Vicat Apparatus ),Initial IS 4031(Part 5))	-	8200.00	-
7 Table 1 ii b(Soundness, Autoclave expansion IS 4031(Part 3) )	-	8200.00	-
7 Table 1 ii a(Soundness, Le-Chate1ier expansion IS 4031(Part 3) )	-	8200.00	-
7 Table 1 i(Fineness IS 4031(Part 2))	-	8200.00	-
6 - Table - 1 vii( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	8200.00	-
6 - Table - 1 vi(Chloride content - Cl 4.13 of IS 4032:1985)	-	8200.00	-
6 - Table - 1 v(Loss on ignition - Cl 6.2 of IS 4032:1985)	-	8200.00	-
6 - Table - 1 iv(Sulphide sulphur (S) - Cl 6.12 of IS 4032:1985)	-	8200.00	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 6.11 of IS 4032:1985)	-	8200.00	-
6 - Table - 1 ii(Magnesia - Cl 6.8 of IS 4032:1985)	-	8200.00	-
6 - Table - 1 i(Insoluble residue - Cl 6.9 of IS 4032:1985)	-	8200.00	-
7 Table 1 v(Transverse strength (optional) IS 4031(Part 8) )	-	8200.00	-
7 Table 1 iv c(Compretsive Strenqth 672 ± 4 hr IS 4031(Part 6))	-	8200.00	-
7 Table 1 iv b(Compretsive Strenqth 168 ± 2 hr IS 4031(Part 6))	-	8200.00	-
7 Table 1 iv a(Compretsive Strenqth .72 ± 1 hr IS 4031(Part 6))	-	8200.00	-
7 Table 1 iii b(Setting Time ( by Vicat Apparatus ), Final IS 4031(Part 5))	-	8200.00	-
7 Table 1 iii a(Setting Time ( by Vicat Apparatus ),Initial IS 4031(Part 5))	-	8200.00	-
7 Table 1 ii b(Soundness, Autoclave expansion IS 4031(Part 3) )	-	8200.00	-
7 Table 1 ii a(Soundness, Le-Chate1ier expansion IS 4031(Part 3) )	-	8200.00	-
7 Table 1 i(Fineness IS 4031(Part 2))	-	8200.00	-
6 - Table - 1 vii( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	8200.00	-
6 - Table - 1 vi(Chloride content - Cl 4.13 of IS 4032:1985)	-	8200.00	-
6 - Table - 1 v(Loss on ignition - Cl 6.2 of IS 4032:1985)	-	8200.00	-
6 - Table - 1 iv(Sulphide sulphur (S) - Cl 6.12 of IS 4032:1985)	-	8200.00	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 6.11 of IS 4032:1985)	-	8200.00	-
6 - Table - 1 ii(Magnesia - Cl 6.8 of IS 4032:1985)	-	8200.00	-
6 - Table - 1 i(Insoluble residue - Cl 6.9 of IS 4032:1985)	-	8200.00	-
Cl. 7 Table-2(Cl. 7 Table-2 i (Fineness ))	-	8200.00	-
Cl. 7 Table-2(Cl. 7 Table-2 ii a (Expansion after aeration ))	-	8200.00	-
Cl. 7 Table-2(Cl. 7 Table-2 ii a (Soundness , Le Chatelier Expansion ))	-	8200.00	-
Cl. 7 Table-2(Cl. 7 Table-2 ii b (Expansion after aeration ))	-	8200.00	-
Cl. 7 Table-2(Cl. 7 Table-2 ii b (Soundness , Autoclave Expansion ))	-	8200.00	-
Cl. 7 Table-2(Cl. 7 Table-2 iii a (Setting time Initial))	-	8200.00	-
Cl. 7 Table-2(Cl. 7 Table-2 iii b (Setting time Final))	-	8200.00	-
Cl. 7 Table-2(Cl. 7 Table-2 iv a (Compressive Strength 72±1 hr IS))	-	8200.00	-
Cl. 7 Table-2(Cl. 7 Table-2 iv b (Compressive Strength 168±2 hr ))	-	8200.00	-
Cl. 7 Table-2(Cl. 7 Table-2 iv c (Compressive Strength 672±4 hr) )	-	8200.00	-
Cl. 7 Table-2(Cl. 7 Table-2 v (Transverse Strength (Optional) )	-	8200.00	-
11.3(Consistency(IS:4031(Pt-4)-1988)	-	8200.00	-

02 Jun, 2027

-
Included w.e.f. 02.03.2026

IS 1341 (2018)

Steel Butt Hinges - Specification (Sixth Revision)

All Type

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3 Tables 2 to 9(Types)	-	6500	-
5.1 Tables 2 to 9 (2)(Size of Hinge)	-	6500	-
5.1 Tables 2 to 9 (3)(Length A)	-	6500	-
5.1 Tables 2 to 9 (4)(Breadth B)	-	6500	-
5.1 Tables 2 to 9 (4)(Breadth B1)	-	6500	-
5.1 Tables 2 to 9 (4)(Breadth B2)	-	6500	-
5.1 Tables 2 to 9 (5)(Thickness of Flap C)	-	6500	-
5.1 Tables 2 to 9 (6)(Diameter of Hinge Pin D)	-	6500	-
5.1 Tables 2 to 9 (7)(Number of Knuckles)	-	6500	-
5.1 Tables 2 to 9 (8)(Number of Screw Holes)	-	6500	-
5.1 Tables 2 to 9 (9)(Holes for Screw No.)	-	6500	-
6.1(General)	-	6500	-
6.1(General)	-	6500	-
6.1(General)	-	6500	-
6.2.1(Knuckles)	-	6500	-
6.3(Pins)	-	6500	-
6.4(Screw Holes)	-	6500	-
6.4.2(Position of Holes)	-	6500	-
6.4.2(X)	-	6500	-
6.4.2(Y)	-	6500	-
6.4.2(Z)	-	6500	-
6.4.2.1(Position of Holes)	-	6500	-
7(Finish)	-	6500	-
TABLE-1 (Clause-4)(TITANIUM)	-	6500	-
TABLE-1 (Clause-4)(VANADIUM)	-	6500	-
TABLE-1 (Clause-4)(NIOBIUM)	-	6500	-
TABLE-1 (Clause-4)(Molybdenum)	-	6500	-
TABLE-1 (Clause-4)(Chromium)	-	6500	-
TABLE-1 (Clause-4)(Nickel)	-	6500	-
TABLE-1 (Clause-4)( ALUMINIUM)	-	6500	-
TABLE-1 (Clause-4)(SILICON)	-	6500	-
TABLE-1 (Clause-4)(NITROGEN)	-	6500	-
TABLE-1 (Clause-4)(MANGANESE)	-	6500	-
TABLE-1 (Clause-4)(PHOSPHURS)	-	6500	-
TABLE-1 (Clause-4)(SULPHUR)	-	6500	-
TABLE-1 (Clause-4)( CARBON)	-	6500	-
Clause 4 Table 1(Manganese ( Pin))	-	6500	-
Clause 4 Table 1(Phosphorus ( Pin))	-	6500	-
Clause 4 Table 1(Sulphur ( Pin))	-	6500	-
Clause 4 Table 1(Carbon ( Pin))	-	6500	-
Clause 4 Table 1(Nitrogen ( Flap))	-	6500	-
Clause 4 Table 1(Manganese ( Flap))	-	6500	-
Clause 4 Table 1(Phosphorus ( Flap))	-	6500	-
Clause 4 Table 1(Sulphur ( Flap))	-	6500	-
Clause 4 Table 1(Carbon ( Flap))	-	6500	-
8(Marking)	-	6500	-
Cl 4 & Table 1(Sulphur- IS 228(Part 9))	-	6500	-
Cl 4 & Table 1(Carbon- IS 228(Part 1))	-	6500	-
Cl 4 & Table 1(Phosphorous- IS 228(Part 3))	-	6500	-
Cl 4 & Table 1(Manganese- IS 228(Part 2))	-	6500	-
Cl 4 & Table 1(Silicon- IS 228(Part 2))	-	6500	-
Cl 4 & Table 1(Nitrogen -IS 228(Part 19))	-	6500	-

02 Jun, 2027

-
Included w.e.f 31.12.2025

IS 2347 (2023)

DOMESTIC PRESSURE COOKER ï¿½ SPECIFICATION

All Type

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Gross capacity)	-	30000	-
4.2(Body Capacity)	-	30000	-
5.1(Body, Lid, Containers and Grid)	-	30000	-
5.1.2(Body and Lid )	-	30000	-
5.1.3(Stainless steel pressure cooker)	-	30000	-
5.1.4(Aluminium cooker )	-	30000	-
5.2(Safety Relief Device)	-	30000	-
5.3(Gasket)	-	30000	-
5.4(Handles and Knobs)	-	30000	-
5.5(Pressure Regulating Device )	-	30000	-
5.6(Vent Seal Pin for Pressure Regulating Device )	-	30000	-
5.7(Vent Pipe )	-	30000	-
5.8(Vent Pipe Nut )	-	30000	-
5.9(Spring )	-	30000	-
5.1(Material of Rim )	-	30000	-
5.11(Visual Pressure Indicator)	-	30000	-
5.12(Gasket Release System)	-	30000	-
6(Construction)	-	30000	-
7(Workmanship and Finish )	-	30000	-
8.1(Air Pressure Test )	-	30000	-
8.2(Proof Pressure Test )	-	30000	-
8.3(Operating Test for Pressure Regulating Device )	-	30000	-
8.4(Test for Safety Relief Device )	-	30000	-
8.5(Bursting Pressure Test )	-	30000	-
8.6(Test for Removal of Lid under Pressure )	-	30000	-
8.7(Test for Spring Loaded Mechanism )	-	30000	-
8.8(Composite Cooker Base )	-	30000	-
8.9(Aluminium induction compatible Base )	-	30000	-
8.1(Handles of cooker )	-	30000	-
8.11(External Coating)	-	30000	-
8.12(Internal Coating )	-	30000	-
8.13(Integral electrical heating)	-	30000	-
8.14(Ply construction cooker Body )	-	30000	-
8.15.1(Fragmentation Test )	-	30000	-
8.15.2(Ball Drop Test )	-	30000	-
8.15.3(Thermal Shock Test )	-	30000	-
8.15.4(Free Fall Test)	-	30000	-
8.17(Test for Effectiveness for Induction Bottom)	-	30000	-
11(Marking )	-	30000	-
12(Packing )	-	30000	-
4(Capacity)	-	30000	-
4.2(Body Capacity)	-	30000	-
5.1.1(Body, Lid, Containers and Grid)	-	30000	-
5.1.2(Body, Lid, Containers and Grid)	-	30000	-
5.1.3(Body, Lid, Containers and Grid)	-	30000	-
5.1.4(Body, Lid, Containers and Grid)	-	30000	-
5.1.5(Body, Lid, Containers and Grid)	-	30000	-
5.2.1(Destructive Type Safety Relief Device)	-	30000	-
5.2.2(Resettable Type Safety Relief Device)	-	30000	-
5.3(Gasket)	-	30000	-
5.4(Handles and Knobs)	-	30000	-
5.5(Pressure Regulating Device)	-	30000	-
5.6(Vent Seal Pin for Pressure Regulating Device)	-	30000	-
5.7(Vent Pipe)	-	30000	-
5.8(Vent Pipe Nut)	-	30000	-
5.9(Spring)	-	30000	-
5.10(Spring)	-	30000	-
5.11(Visual Pressure Indicator)	-	30000	-
5.12(Gasket Release System)	-	30000	-
6(CONSTRUCTION)	-	30000	-
6.1(Pressure Regulating Device)	-	30000	-
6.1.1(Pressure Regulating Device)	-	30000	-
6.1.1(Minimum Inside diameter of Vent Pipe.)	-	30000	-
6.1.2(Pressure Regulating Device)	-	30000	-
6.1.3(Pressure Regulating Device)	-	30000	-
6.1.4(Pressure Regulating Device)	-	30000	-
6.1.5(Pressure Regulating Device)	-	30000	-
6.1.6(Pressure Regulating Device)	-	30000	-
6.2(Safety Relief Device)	-	30000	-
6.2.1(Safety Relief Device)	-	30000	-
6.2.2(Safety Relief Device)	-	30000	-
6.2.3(Safety Relief Device)	-	30000	-
6.3.1(Temperature Responsive Safety Relief Device)	-	30000	-
6.3.2(Temperature Responsive Safety Relief Device)	-	30000	-
6.3.3(Temperature Responsive Safety Relief Device)	-	30000	-
6.4.1(Handles and Knobs)	-	30000	-
6.4.1.1(Handles and Knobs)	-	30000	-
6.4.2(Handles and Knobs)	-	30000	-
6.4.2.1(Handles and Knobs)	-	30000	-
6.5(CONSTRUCTION)	-	30000	-
6.6(CONSTRUCTION)	-	30000	-
6.7(Internal Level Marking)	-	30000	-
6.8(Internal Level Marking)	-	30000	-
7.1(WORKMANSHIP AND FINISH)	-	30000	-
7.2(WORKMANSHIP AND FINISH)	-	30000	-
8.17(Test for Effectiveness for Induction Bottom)	-	30000	-
8.16(PRD with chain)	-	30000	-
8.15.4.2(Glass lid without rim)	-	30000	-
8.15.4.1("Free Fall Test ( Glass lid with rim) ")	-	30000	-
8.15.3(Thermal Shock Test on Tempered Glass lid)	-	30000	-
8.15.2(Ball Drop Test on Tempered Glass lid)	-	30000	-
8.15.1(Fragmentation Test on Tempered Glass lid)	-	30000	-
8.14(3 ply construction cooker body)	-	30000	-
8.13(Pressure cooker with integral electrical heating)	-	30000	-
8.12(Internal Coating)	-	30000	-
7.3(WORKMANSHIP AND FINISH)	-	30000	-
7.4(WORKMANSHIP AND FINISH)	-	30000	-
8.1(Air Pressure Test)	-	30000	-
8.2(Proof Pressure Test)	-	30000	-
8.3.1(Operating Test for Pressure Regulating Device)	-	30000	-
8.4.1(Test for Safety Relief Device)	-	30000	-
8.4.2(Test for Safety Relief Device)	-	30000	-
8.4.2 NOTE(Test for Safety Relief Device)	-	30000	-
8.5(Bursting Pressure Test)	-	30000	-
8.6.1(Tests for Removal of Lid under Pressure For Outer Lid Cooker)	-	30000	-
8.6.2(Tests for Removal of Lid under Pressure For inner Lid Cooker)	-	30000	-
8.6.3(Tests for Removal of Lid under Pressure: For Cooker Fastened by Screw Clamps or Any Other Locking Device)	-	30000	-
8.6.4(Tests for Removal of Lid under Pressure in case of electrical pressure cooker)	-	30000	-
8.7(Test for Spring Loaded Mechanism)	-	30000	-
8.8(Test for stainless steel cookers)	-	30000	-
8.9("For stainless steel, aluminium induction compatible base and 3 ply cooker")	-	30000	-
8.10(Testing of Handles of the cooker)	-	30000	-
8.10 Note 3(Testing of Handles of the cooker)	-	30000	-
8.10 Note 4(Testing of Handles of the cooker)	-	30000	-
8.10 Note 5(Testing of Handles of the cooker)	-	30000	-
8.10 Note 6(Testing of Handles of the cooker)	-	30000	-
8.11.1(External Coating)	-	30000	-
8.10.1(Testing of Handles of the cooker)	-	30000	-

02 Jun, 2027

-
Included w.e.f 31.12.2025

IS 13713 (2021)

Plastic Chairs for General Purposes - Specification ( First Revision )

All Type

23000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Material)	-	23000	-
5(Design)	-	23000	-
6(Dimensions)	-	23000	-
6 Table 1i a(Seat: Seat height)	-	23000	-
6 Table 1i b(Seat: Effective seat depth)	-	23000	-
6 Table 1i c(Seat: Seat width)	-	23000	-
6 Table 1ii(Total height)	-	23000	-
6 Table 1iii a(Total width (For chair with arms))	-	23000	-
6 Table 1iii b(Total width (For chair without arms))	-	23000	-
6 Table 1iv a(Total depth (For chair with arms))	-	23000	-
6 Table 1iv b(Total depth (For chair without arms))	-	23000	-
7(Mass)	-	23000	-
8(Workmanship and finish)	-	23000	-
9.1.1(Strength Test-static test)	-	23000	-
9.1.1(Strength Test-fatigue test)	-	23000	-
9.1.1(Strength Test-Impact test)	-	23000	-
9.1.2(Stability Test)	-	23000	-
9.1.3(Free Fall Drop Test)	-	23000	-
9.1.4(Static Load Test for Leg Slippage and Distortion)	-	23000	-
9.1.5(Handle Impact Test)	-	23000	-
9.1.6(Vibration Test)	-	23000	-
9.1.7(Rigidity Test for Chair Shell)	-	23000	-
9.1.8(Colour Fastness to Daylight)	-	23000	-
9.1.9(Determination of Flammability by Oxygen Index)	-	23000	-

02 Jun, 2027

-
Included w.e.f. 29.10.2025

IS 7454 (2024)

Rehabilitation Equipment â Wheelchairs, Folding, Adult Size â Specification (Second Revision)

All Type

43000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(SHAPE AND DIMENSIONS)	-	43000	-
Cl-6(Materials)	-	43000	-
Cl-7.1(Backrest and Seat)	-	43000	-
Cl-7.2(Frame)	-	43000	-
Cl-7.3(Footrests and Supports)	-	43000	-
Cl-7.4(Armrests)	-	43000	-
Cl-7.5(Hand Rims)	-	43000	-
Cl-7.6(Brakes)	-	43000	-
Cl-7.7(Castors)	-	43000	-
Cl-7.8(Wheels)	-	43000	-
Cl-7.9(Clothing Guards)	-	43000	-
Cl-7.10(Folding Mechanism)	-	43000	-
Cl-7.11(Lubrication)	-	43000	-
Cl-8(Finish)	-	43000	-
Cl-9.1(Test for Wheeling)	-	43000	-
Cl-9.2(Hazard Running Test)	-	43000	-
Cl-9.3(Load Test)	-	43000	-
Cl-9.4(Test for Folding)	-	43000	-
Cl-9.5(Stability Test)	-	43000	-
Cl-11(Marking)	-	43000	-

02 Jun, 2027

-
Included w.e.f. 29.10.2025

IS 1237 (2012)

Cement Concrete Flooring Tiles - Specification

All Type

5500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7.1(Length, Breadth, Minimum thickness, Difference in length of side between the longest side and shorterst side, Half tiles, Difference in Thickness between the thickest and thinnest tile, Thickness of wearing layer)	-	500	-
Cl 12.2(Concavity & Convexity )	-	500	-
Cl 12.3(The Maximum gap between the arms of the square and the edge of the title shall notexceed 2 percent of the length.)	-	500	-
Cl 12.4(Shall not exceed 1 percent of the length of the edge.)	-	500	-
Cl 12.5(Water absorption)	-	500	-
Cl 12.6(Wet transverse strength )	-	1500	-
Cl 12.7(Resistance to wear)	-	1500	-
Cl 11(Suface Finish)	-	500	-
Cl 7.1(Length, Breadth, Minimum thickness, Difference in length of side between the longest side and shorterst side, Half tiles, Difference in Thickness between the thickest and thinnest tile, Thickness of wearing layer)	-	500	-
Cl 12.2(Concavity & Convexity )	-	500	-
Cl 12.3(The Maximum gap between the arms of the square and the edge of the title shall notexceed 2 percent of the length.)	-	500	-
Cl 12.4(Shall not exceed 1 percent of the length of the edge.)	-	500	-
Cl 12.5(Water absorption)	-	500	-
Cl 12.6(Wet transverse strength )	-	1500	-
Cl 12.7(Resistance to wear)	-	1500	-
Cl 11(Suface Finish)	-	500	-
Cl 7.1(Length, Breadth, Minimum thickness, Difference in length of side between the longest side and shorterst side, Half tiles, Difference in Thickness between the thickest and thinnest tile, Thickness of wearing layer)	-	500	-
Cl 12.2(Concavity & Convexity )	-	500	-
Cl 12.3(The Maximum gap between the arms of the square and the edge of the title shall notexceed 2 percent of the length.)	-	500	-
Cl 12.4(Shall not exceed 1 percent of the length of the edge.)	-	500	-
Cl 12.5(Water absorption)	-	500	-
Cl 12.6(Wet transverse strength )	-	1500	-
Cl 12.5(Water absorption)	-	500	-
Cl 12.7(Resistance to wear)	-	1500	-
Cl 11(Suface Finish)	-	500	-
Cl 12.7(Resistance to wear)	-	1500	-
Cl 11(Suface Finish)	-	500	-
Cl 7.1(Length, Breadth, Minimum thickness, Difference in length of side between the longest side and shorterst side, Half tiles, Difference in Thickness between the thickest and thinnest tile, Thickness of wearing layer)	-	500	-
Cl 12.2(Concavity & Convexity )	-	500	-
Cl 12.3(The Maximum gap between the arms of the square and the edge of the title shall notexceed 2 percent of the length.)	-	500	-
Cl 12.4(Shall not exceed 1 percent of the length of the edge.)	-	500	-
Cl 12.6(Wet transverse strength )	-	1500	-
Cl 7.1(Length, Breadth, Minimum thickness, Difference in length of side between the longest side and shorterst side, Half tiles, Difference in Thickness between the thickest and thinnest tile, Thickness of wearing layer)	-	500	-
Cl 12.2(Concavity & Convexity )	-	500	-
Cl 12.3(The Maximum gap between the arms of the square and the edge of the title shall notexceed 2 percent of the length.)	-	500	-
Cl 12.4(Shall not exceed 1 percent of the length of the edge.)	-	500	-
Cl 12.5(Water absorption)	-	500	-
Cl 12.6(Wet transverse strength )	-	1500	-
Cl 12.7(Resistance to wear)	-	1500	-
Cl 11(Suface Finish)	-	500	-
Cl 7.1(Length, Breadth, Minimum thickness, Difference in length of side between the longest side and shorterst side, Half tiles, Difference in Thickness between the thickest and thinnest tile, Thickness of wearing layer)	-	500	-
Cl 12.2(Concavity & Convexity )	-	500	-
Cl 12.3(The Maximum gap between the arms of the square and the edge of the title shall notexceed 2 percent of the length.)	-	500	-
Cl 12.4(Shall not exceed 1 percent of the length of the edge.)	-	500	-
Cl 12.5(Water absorption)	-	500	-
Cl 12.6(Wet transverse strength )	-	1500	-
Cl 12.7(Resistance to wear)	-	1500	-
Cl 11(Suface Finish)	-	500	-
Cl 11(Suface Finish)	-	500	-
Cl 12.7(Resistance to wear)	-	1500	-
Cl 12.6(Wet transverse strength )	-	1500	-
Cl 12.5(Water absorption)	-	500	-
Cl 12.4(Shall not exceed 1 percent of the length of the edge.)	-	500	-
Cl 12.3(The Maximum gap between the arms of the square and the edge of the title shall notexceed 2 percent of the length.)	-	500	-
Cl 12.2(Concavity & Convexity )	-	500	-
Cl 7.1(Length, Breadth, Minimum thickness, Difference in length of side between the longest side and shorterst side, Half tiles, Difference in Thickness between the thickest and thinnest tile, Thickness of wearing layer)	-	500	-

02 Jun, 2027

-
-

IS 14756 (2024)

Stainless Steel Utensils - Specification (THIRD REVISION)

All Type

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 3.1(Material used for manufacturing utensils)	-	25000	-
Cl 3.2(Material used for composite bottom)	-	25000	-
Cl 3.3(Material used for body of utensil of 3-ply construction)	-	25000	-
Cl 3.4(Material used for stainless steel lid)	-	25000	-
Cl 3.5(Material used for tempered glass lid)	-	25000	-
Cl 3.5(Material used for stainless steel rim)	-	25000	-
Cl 4.2 & Table 1(Minimum Sheet Thickness for Body of Utensil)	-	25000	-
Cl 4.2 & Table 2(Minimum Sheet Thickness for Lid of Utensil)	-	25000	-
Cl 4.2(Thickness of the finished utensil)	-	25000	-
Cl 4.3(Classification)	-	25000	-
Cl 4.4 (i)(Thickness of Aluminium disc/core)	-	25000	-
Cl 4.4 (ii)(Thickness of Protector/cowl)	-	25000	-
Cl 4.5(Minimum sheet thickness (3-ply utensil))	-	25000	-
Cl 4.5(Thickness of finished utensil (3-ply utensil))	-	25000	-
Cl 5.1(Manufacturing defect & visual appearance)	-	25000	-
CL 5.2(Accessibility for cleaning)	-	25000	-
Cl 5.3(Joining of handles to the utensils)	-	25000	-
Cl 5.4(Requirement for handles)	-	25000	-
Cl 5.5(Welding (Finish))	-	25000	-
Cl 5.6(Finish of 3-ply utensil)	-	25000	-
Cl 5.7(Requirement for coating)	-	25000	-
Cl 5.8(Coating thickness test)	-	25000	-
Cl 5.8(Coating adhesion test)	-	25000	-
Cl 5.8.1(Thermal shock test (Coating))	-	25000	-
Cl 6.1(Staining Test (Type Test - Frequency Once in a Year))	-	25000	-
Cl 6.2(Mechanical Shock Test (for Cladded Utensils Only))	-	25000	-
Cl 6.3(Thermal Shock Test (for Cladded Utensils Only))	-	25000	-
Cl 6.4(Dry Heat Test (for Cladded Utensils Only))	-	25000	-
Cl 6.5(Coating Thickness Test (for Copper Deposit))	-	25000	-
Cl 6.6(Thermal shock test (3-ply construction utensil body))	-	25000	-
Cl 6.7(Nominal Capacity Test)	-	25000	-
Cl 8(Marking)	-	25000	-
3.1(a) Carbon)	-	25000	-
3.1(b) Silicon)	-	25000	-
3.1(c)Manganese)	-	25000	-
3.1(d) Nickel)	-	25000	-
3.1(Chromium)	-	25000	-
3.1(Sulphu)	-	25000	-
3.1(Phosphorus)	-	25000	-
Stainless Steel Utensils - Specification (THIRD REVISION)(Copper)	-	25000	-
3.1(Nitrogen)	-	25000	-
3.2 a(a) Carbon)	-	25000	-
3.2 a(b) Silicon)	-	25000	-
68995(Manganese)	-	25000	-
3.2 a(d) Nickel)	-	25000	-
3.2 a(Chromium)	-	25000	-
3.2 a(Sulphur)	-	25000	-
3.2 a(g) Phosphorus)	-	25000	-
3.2 a(h) Copper)	-	25000	-
3.2 a(Nitrogen)	-	25000	-
3.2 b(a) Aluminium)	-	25000	-
3.2 b(b) Copper)	-	25000	-
3.2 b(c) Magnesium)	-	25000	-
3.2 b(d) Silicon)	-	25000	-
3.2 b(e) Iron)	-	25000	-
3.2 b(f) Manganese)	-	25000	-
3.2 b(d) Silicon)	-	25000	-
3.2 b(e) Iron)	-	25000	-
3.2 b(f) Manganese)	-	25000	-
3.2 b(g) Zinc)	-	25000	-
3.2 b(h) Titanium)	-	25000	-
3.2 b(i) Chromium)	-	25000	-
3.2 b(j) Cu+Si+Fe+Mn+Zn+mg)	-	25000	-
3.2 b(k) Lead)	-	25000	-
3.2 c(a) Carbon)	-	25000	-
3.2 c(b) Silicon)	-	25000	-
3.2 c(c) Manganese)	-	25000	-
3.2 c(d) Nickel)	-	25000	-
3.2 c(e) Chromium)	-	25000	-
3.2 c(f) Sulphur)	-	25000	-
3.2 c(g) Phosphorus)	-	25000	-
3.3(a) Inner layer)	-	25000	-
3.3(b) Middlelayer)	-	25000	-
3.3(c) Outerlayer)	-	25000	-
3.4(a) Carbon)	-	25000	-
3.4(b) Silicon)	-	25000	-
3.4(c) Manganese)	-	25000	-
3.4(d) Nickel)	-	25000	-
3.4(e) Chromium)	-	25000	-
3.4(f) Sulphur)	-	25000	-
3.4(g) Phosphorus)	-	25000	-
3.4(h) Copper)	-	25000	-
3.4(i) Nitrogen)	-	25000	-
3.4(Thickness stainless steel lid)	-	25000	-
3.5(If the utensils provided with tempered glass lid)	-	25000	-
4.1(Shapes and Dimensions)	-	25000	-
4.2(Thickness of the sheet)	-	25000	-
4.3(Classifications)	-	25000	-
4.3(Core Thickness for 3-ply Construction (asper IS15960))	-	25000	-
4.3(Thickness of protective layer (as per IS 15960))	-	25000	-
4.4(Thickness of 3ply full body utensil)	-	25000	-
5(Workmanship and finish)	-	25000	-
5.4(Handles)	-	25000	-
4.1 of IS 13395(Construction)	-	25000	-
4.2 of IS 13395(Materials)	-	25000	-
4.3 of IS 13395(Selection and Size)	-	25000	-
4.4 of Is 13395(Position of Handle and Knob with Respect to Cookware)	-	25000	-
4.5 of IS 13395(Attachment to Cookware)	-	25000	-
5.2 of IS 13395(Bending Strength)	-	25000	-
5.3 of IS 13395(Torque Strength)	-	25000	-
5.4 of IS 13395(Impact Strength)	-	25000	-
5.5 of IS 13395(Fatigue Resistance 15 000 cycles withstand)	-	25000	-
5.6 of IS 13395(Leakage)	-	25000	-
5.7 of IS 13395(Thermal Insulation)	-	25000	-
5.8 of IS 13395(Heat Resistance)	-	25000	-
5.9 of IS 13395(Washing Resistance)	-	25000	-
5.10 of IS 13395(Burning Resistance)	-	25000	-
5.5(Material comes in contact with food)	-	25000	-
6.1(Staining Test)	-	25000	-
6.2(Mechanical Shock Test)	-	25000	-
6.3(Thermal Shock Test)	-	25000	-
6.4(Dry Heat Test)	-	25000	-
6.6(Heat test)	-	25000	-
6.7.1(Nominal Capacity Test)	-	25000	-
6.7.2(Internal diameter of utensil)	-	25000	-
Annex C(Test for leaching)	-	25000	-
Annex C(Sensorial test)	-	25000	-

02 Jun, 2027

-
-

IS 15658 (2021)

Concrete Paving Blocks - Specification ( First Revision )

17500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 7.3, Annex G(Average Breaking Load)	-	1000	-
Clause 7.3, Annex G(Individual Breaking Load)	-	1000	-
Clause 7.3, Annex F(Average Failure Load per unit Length)	-	1000	-
Clause 7.3, Annex F(Individual Failure Load per unit Length)	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) b)(Average Flexural strength )	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength (i))	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) b)(Average Tensile splitting strength )	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength (i))	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) ii)(Wet Abrasion resistance (Average of three test specimens))	-	500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) i)( Indivdual Wet Abrasion Resistance )	-	500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) ii)(Dry Abrasion resistance (Average of three test specimens))	-	500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) i)( Indivdual Dry Abrasion Resistance )	-	500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Compressive strength (Average of eight test specimens))	-	500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) a)(Indivdual Compressive strength (i))	-	500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) b)(Water absorption (Average of three test specimens))	-	250	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) a)( Indivdual Water absorption)	-	250	-
Clause 7.2 & 9.1.3, Table 2, SI No. (ix)(Deviation from squareness)	-	250	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Indivdual Ratio of wearing face area and Plan area (Asw/Asp))	-	250	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Ratio of wearing face area and Plan area (Asw/Asp))	-	250	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Indivdual Plan Area (Asp))	-	250	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Plan Area (Asp))	-	250	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Indivdual Thickness of wearing Layer)	-	250	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Thickness of wearing Layer)	-	250	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Depth)	-	250	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Depth)	-	250	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Width)	-	250	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Width)	-	250	-
Clause 7.2, Table No. 2, SI No. (iv) (Indivdual Aspect Ratio, L/Th)	-	250	-
Clause 7.2, Table No. 2, SI No. (iv) (Aspect Ratio, L/Th)	-	250	-
Clause 7.2, Table No. 2, SI No. (iii) (Indivdual Thickness, Th)	-	250	-
Clause 7.2, Table No. 2, SI No. (iii) (Thickness, Th)	-	250	-
Clause 7.2, Table No. 2, SI No. (ii) (Indivdual Length, L)	-	250	-
Clause 7.2, Table No. 2, SI No. (ii) (Length, L)	-	250	-
Clause 7.2, Table No. 2, SI No. (i) (Indivdual Width, W)	-	250	-
Clause 7.2, Table No. 2, SI No. (i) (Width, W)	-	250	-
Clause 6.3 (Bonding and Delamination between the layers of paver blocks)	-	250	-
Clause 7.1.3 (Colour and Texture)	-	250	-
Clauses 7.1.2 & 9.1.2 (Visual Inspection)	-	250	-
Clause 7.1.1 (General Quality)	-	250	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Lower)	-	250	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Lower)	-	250	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Higher)	-	250	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Higher)	-	250	-
Clause 3.20(Spacer nibs)	-	250	-
10(Marking)	-	250	-
cl.5(Cement)	-	1000	-
5.2(Mineral Admixture)	-	1000	-
5.3(Chemical Admixtures)	-	1000	-
5.4(Coarse and Fine Aggregates)	-	1000	-
5.5(Pigments)	-	1000	-
5.6(Water)	-	1000	-

02 Jun, 2027

-
-

IS 4246 (2025)

DOMESTIC GAS STOVE AND BUILT IN HOB FOR USE WITH LPG SPECIFICATION (Sixth Revision )

All Type

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(General - IS 4246 : 2025)	-	14500	-
4.1(General - IS 4246 : 2025)	-	14500	-
4.1.1(General - IS 4246 : 2025)	-	14500	-
5(Materials - Cl. 5 of IS 5116)	-	14500	-
5.1.1(Materials - Toughened glass, if provided,)	-	14500	-
5.1.1(Materials - Toughened glass, if provided,)	-	14500	-
5.1.1(Materials - Toughened glass, if provided,)	-	14500	-
5.1.1(Materials - Toughened glass, if provided,)	-	14500	-
5.1.1(Materials - Toughened glass, if provided,)	-	14500	-
5.1.1(Materials - Toughened glass, if provided,)	-	14500	-
5.1.1(Materials - Toughened glass, if provided,)	-	14500	-
5.1.1(Materials - Toughened glass, if provided,)	-	14500	-
5.1.1(Materials - Toughened glass, if provided,)	-	14500	-
5.1(Materials - IS 5116)	-	14500	-
5.1(Materials - IS 5116)	-	14500	-
5.1.1(Materials - IS 5116)	-	14500	-
5.1.1(Materials - IS 5116)	-	14500	-
5.2(Materials - IS 5116)	-	14500	-
5.2(Materials - IS 5116)	-	14500	-
5.3(Materials - IS 5116)	-	14500	-
5.5(Materials - IS 5116)	-	14500	-
5.5(Materials - IS 5116)	-	14500	-
5.5(Materials - IS 5116)	-	14500	-
5.7(Materials - IS 5116)	-	14500	-
6.1(Design for Maintainance)	-	14500	-
6.1(Design for Maintainance)	-	14500	-
6.2(Design for Maintainance)	-	14500	-
6.2(Design for Maintainance)	-	14500	-
6.3(Design for Maintainance)	-	14500	-
6.4(Design for Maintainance)	-	14500	-
6.5(Design for Maintainance)	-	14500	-
6.6(Design for Maintainance)	-	14500	-
7.0(Rigidity and Stability)	-	14500	-
7.1(Rigidity and Stability)	-	14500	-
7.2(Rigidity and Stability)	-	14500	-
7.3(Rigidity and Stability)	-	14500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	14500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	14500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	14500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	14500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	14500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	14500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	14500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	14500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	14500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	14500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	14500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	14500	-
8.2(Workmanship and Finish -)	-	14500	-
8.3(Workmanship and Finish -)	-	14500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	14500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	14500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	14500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	14500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	14500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	14500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	14500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	14500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	14500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	14500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	14500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	14500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	14500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	14500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	14500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	14500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	14500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	14500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	14500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	14500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	14500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	14500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	14500	-
10(Injector Jets)	-	14500	-
10(Injector Jets)	-	14500	-
10(Injector Jets)	-	14500	-
10(Injector Jets)	-	14500	-
10(Injector Jets)	-	14500	-
10(Injector Jets)	-	14500	-
11.1(Burners- Cl. 10 of IS 5116)	-	14500	-
11.1(Burners- Cl. 10 of IS 5116)	-	14500	-
11.1(Burners- Cl. 10 of IS 5116)	-	14500	-
11.1(Burners- Cl. 10 of IS 5116)	-	14500	-
11.1(Burners- Cl. 10 of IS 5116)	-	14500	-
11.2(Burners)	-	14500	-
11.3(Burners)	-	14500	-
11.4(Burners)	-	14500	-
12.1(Burner Pan Support)	-	14500	-
12.2(Burner Pan Support)	-	14500	-
12.3(Burner Pan Support)	-	14500	-
13.1(Gas Soundness Test - Cl. 16 of IS 5116)	-	14500	-
13,2(Gas Soundness Test)	-	14500	-
13.2(Gas Leak Detector)	-	14500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	14500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	14500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	14500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	14500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	14500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	14500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	14500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	14500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	14500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	14500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	14500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	14500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	14500	-
14.2(Gas Inlet Connection)	-	14500	-
14.2(Gas Inlet Connection)	-	14500	-
14.2(Gas Inlet Connection)	-	14500	-
14.2(Gas Inlet Connection)	-	14500	-
14.3(Gas Inlet Connection)	-	14500	-
14.4(Gas Inlet Connection)	-	14500	-
14.5(Gas Inlet Connection - Cl. 17.3 of IS 5116)	-	14500	-
14.6(Gas Inlet Connection)	-	14500	-
15.0(Strength and Rigidity)	-	14500	-
15.0(Strength and Rigidity)	-	14500	-
15.0(Strength and Rigidity)	-	14500	-
15.0(Strength and Rigidity)	-	14500	-
17.0(Gas Consumption Test)	-	14500	-
17.0(Gas Consumption Test)	-	14500	-
17.0(Gas Consumption Test)	-	14500	-
17.0(Gas Consumption Test)	-	14500	-
17.0(Gas Consumption Test)	-	14500	-
17.0(Gas Consumption Test)	-	14500	-
17.2(Gas Consumption Test - For Gas Stoves)	-	14500	-
17.2 (a)(Gas Consumption Test - For Gas Stoves)	-	14500	-
17.2 (b)(Gas Consumption Test - For Gas Stoves)	-	14500	-
17.2 (c)(Gas Consumption Test - For Gas Stoves)	-	14500	-
17.3(Gas Consumption Test - For Built in Hobs)	-	14500	-
17.3.1(Gas Consumption Test - For Built in Hobs)	-	14500	-
17.3.2(Gas Consumption Test - For Built in Hobs)	-	14500	-
18.1(Ignition and Flame Travel)	-	14500	-
18.1(Ignition and Flame Travel)	-	14500	-
18.2(Ignition and Flame Travel)	-	14500	-
18.3(Ignition and Flame Travel)	-	14500	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	14500	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	14500	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	14500	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	14500	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	14500	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	14500	-
19.1(Flame Stability)	-	14500	-
19.1.1(Flame Stability)	-	14500	-
19.2(Flame Stability)	-	14500	-
19.3(Flame Stability)	-	14500	-
20(Noise Control)	-	14500	-
21(Flash Back)	-	14500	-
22(Formation of Soot)	-	14500	-
23(Resistance to Draught)	-	14500	-
24.1(Combustion)	-	14500	-
24.1(Combustion)	-	14500	-
24.2(Combustion)	-	14500	-
25.1(Fire Hazard and Limiting Temperatures)	-	14500	-
25.1(Fire Hazard and Limiting Temperatures)	-	14500	-
25.1(Fire Hazard and Limiting Temperatures)	-	14500	-
25.1(Fire Hazard and Limiting Temperatures)	-	14500	-
25.2(Fire Hazard and Limiting Temperatures)	-	14500	-
26.1(Thermal Efficiency- Gas Stoves)	-	14500	-
26.1(Thermal Efficiency- Gas Stoves)	-	14500	-
26.1(Thermal Efficiency- Gas Stoves)	-	14500	-
26.1(Thermal Efficiency- Gas Stoves)	-	14500	-
26.1(Thermal Efficiency- Gas Stoves)	-	14500	-
26.2(Thermal Efficiency- For Built in Hobs)	-	14500	-
26.2(Thermal Efficiency- For Built in Hobs)	-	14500	-
26.2(Thermal Efficiency- For Built in Hobs)	-	14500	-
26.2(Thermal Efficiency- For Built in Hobs)	-	14500	-
26.2(Thermal Efficiency- For Built in Hobs)	-	14500	-
4.1(General - IS 4246 : 2025)	-	14500	-
4.1(General - IS 4246 : 2025)	-	14500	-
4.1.1(General - IS 4246 : 2025)	-	14500	-
5(Materials - Cl. 5 of IS 5116)	-	14500	-
5.1.1(Materials - Toughened glass, if provided,)	-	14500	-
5.1.1(Materials - Toughened glass, if provided,)	-	14500	-
5.1.1(Materials - Toughened glass, if provided,)	-	14500	-
5.1.1(Materials - Toughened glass, if provided,)	-	14500	-
5.1.1(Materials - Toughened glass, if provided,)	-	14500	-
5.1.1(Materials - Toughened glass, if provided,)	-	14500	-
5.1.1(Materials - Toughened glass, if provided,)	-	14500	-
5.1.1(Materials - Toughened glass, if provided,)	-	14500	-
5.1.1(Materials - Toughened glass, if provided,)	-	14500	-
5.1(Materials - IS 5116)	-	14500	-
5.1(Materials - IS 5116)	-	14500	-
5.1.1(Materials - IS 5116)	-	14500	-
5.1.1(Materials - IS 5116)	-	14500	-
5.2(Materials - IS 5116)	-	14500	-
5.2(Materials - IS 5116)	-	14500	-
5.3(Materials - IS 5116)	-	14500	-
5.5(Materials - IS 5116)	-	14500	-
5.5(Materials - IS 5116)	-	14500	-
5.5(Materials - IS 5116)	-	14500	-
5.7(Materials - IS 5116)	-	14500	-
6.1(Design for Maintainance)	-	14500	-
6.1(Design for Maintainance)	-	14500	-
6.2(Design for Maintainance)	-	14500	-
6.2(Design for Maintainance)	-	14500	-
6.3(Design for Maintainance)	-	14500	-
6.4(Design for Maintainance)	-	14500	-
6.5(Design for Maintainance)	-	14500	-
6.6(Design for Maintainance)	-	14500	-
7.0(Rigidity and Stability)	-	14500	-
7.1(Rigidity and Stability)	-	14500	-
7.2(Rigidity and Stability)	-	14500	-
7.3(Rigidity and Stability)	-	14500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	14500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	14500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	14500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	14500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	14500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	14500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	14500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	14500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	14500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	14500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	14500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	14500	-
8.2(Workmanship and Finish -)	-	14500	-
8.3(Workmanship and Finish -)	-	14500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	14500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	14500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	14500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	14500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	14500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	14500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	14500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	14500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	14500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	14500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	14500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	14500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	14500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	14500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	14500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	14500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	14500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	14500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	14500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	14500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	14500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	14500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	14500	-
10(Injector Jets)	-	14500	-
10(Injector Jets)	-	14500	-
10(Injector Jets)	-	14500	-
10(Injector Jets)	-	14500	-
10(Injector Jets)	-	14500	-
10(Injector Jets)	-	14500	-
11.1(Burners- Cl. 10 of IS 5116)	-	14500	-
11.1(Burners- Cl. 10 of IS 5116)	-	14500	-
11.1(Burners- Cl. 10 of IS 5116)	-	14500	-
11.1(Burners- Cl. 10 of IS 5116)	-	14500	-
11.1(Burners- Cl. 10 of IS 5116)	-	14500	-
11.2(Burners)	-	14500	-
11.3(Burners)	-	14500	-
11.4(Burners)	-	14500	-
12.1(Burner Pan Support)	-	14500	-
12.2(Burner Pan Support)	-	14500	-
12.3(Burner Pan Support)	-	14500	-
13.1(Gas Soundness Test - Cl. 16 of IS 5116)	-	14500	-
13,2(Gas Soundness Test)	-	14500	-
13.2(Gas Leak Detector)	-	14500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	14500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	14500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	14500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	14500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	14500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	14500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	14500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	14500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	14500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	14500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	14500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	14500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	14500	-
14.2(Gas Inlet Connection)	-	14500	-
14.2(Gas Inlet Connection)	-	14500	-
14.2(Gas Inlet Connection)	-	14500	-
14.2(Gas Inlet Connection)	-	14500	-
14.3(Gas Inlet Connection)	-	14500	-
14.4(Gas Inlet Connection)	-	14500	-
14.5(Gas Inlet Connection - Cl. 17.3 of IS 5116)	-	14500	-
14.6(Gas Inlet Connection)	-	14500	-
15.0(Strength and Rigidity)	-	14500	-
15.0(Strength and Rigidity)	-	14500	-
15.0(Strength and Rigidity)	-	14500	-
15.0(Strength and Rigidity)	-	14500	-
17.0(Gas Consumption Test)	-	14500	-
17.0(Gas Consumption Test)	-	14500	-
17.0(Gas Consumption Test)	-	14500	-
17.0(Gas Consumption Test)	-	14500	-
17.0(Gas Consumption Test)	-	14500	-
17.0(Gas Consumption Test)	-	14500	-
17.2(Gas Consumption Test - For Gas Stoves)	-	14500	-
17.2 (a)(Gas Consumption Test - For Gas Stoves)	-	14500	-
17.2 (b)(Gas Consumption Test - For Gas Stoves)	-	14500	-
17.2 (c)(Gas Consumption Test - For Gas Stoves)	-	14500	-
17.3(Gas Consumption Test - For Built in Hobs)	-	14500	-
17.3.1(Gas Consumption Test - For Built in Hobs)	-	14500	-
17.3.2(Gas Consumption Test - For Built in Hobs)	-	14500	-
18.1(Ignition and Flame Travel)	-	14500	-
18.1(Ignition and Flame Travel)	-	14500	-
18.2(Ignition and Flame Travel)	-	14500	-
18.3(Ignition and Flame Travel)	-	14500	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	14500	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	14500	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	14500	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	14500	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	14500	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	14500	-
19.1(Flame Stability)	-	14500	-
19.1.1(Flame Stability)	-	14500	-
19.2(Flame Stability)	-	14500	-
19.3(Flame Stability)	-	14500	-
20(Noise Control)	-	14500	-
21(Flash Back)	-	14500	-
22(Formation of Soot)	-	14500	-
23(Resistance to Draught)	-	14500	-
24.1(Combustion)	-	14500	-
24.1(Combustion)	-	14500	-
24.2(Combustion)	-	14500	-
25.1(Fire Hazard and Limiting Temperatures)	-	14500	-
25.1(Fire Hazard and Limiting Temperatures)	-	14500	-
25.1(Fire Hazard and Limiting Temperatures)	-	14500	-
25.1(Fire Hazard and Limiting Temperatures)	-	14500	-
25.2(Fire Hazard and Limiting Temperatures)	-	14500	-
26.1(Thermal Efficiency- Gas Stoves)	-	14500	-
26.1(Thermal Efficiency- Gas Stoves)	-	14500	-
26.1(Thermal Efficiency- Gas Stoves)	-	14500	-
26.1(Thermal Efficiency- Gas Stoves)	-	14500	-
26.1(Thermal Efficiency- Gas Stoves)	-	14500	-
26.2(Thermal Efficiency- For Built in Hobs)	-	14500	-
26.2(Thermal Efficiency- For Built in Hobs)	-	14500	-
26.2(Thermal Efficiency- For Built in Hobs)	-	14500	-
26.2(Thermal Efficiency- For Built in Hobs)	-	14500	-
26.2(Thermal Efficiency- For Built in Hobs)	-	14500	-

02 Jun, 2027

-
Included w.e.f.29.09.2025

IS 18297 (2023)

Cabinet Hinges

Level 1/ Level 2/ Level 3

23000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Type & Size)	-	23000	-
4.1(Type (a) Full Overlay (Fig-1))	-	23000	-
4.2((b) Half Overlay (Fig-2))	-	23000	-
4.1((b) Half Overlay (Fig-2))	-	23000	-
4.1(c) Inset (Fig-2))	-	23000	-
4.2(Size (Fig-2))	-	23000	-
4.3(Manufacture & Purchaser)	-	23000	-
5(Material (IS 18297))	-	23000	-
6 Table 1(Manufacture(IS: 18297))	-	23000	-
7.1(General Test Requirement (IS: 18297))	-	23000	-
7.1.1(Preparatory Measures (IS:18297))	-	23000	-
7.1.2(Limiting Deviations (IS:18297))	-	23000	-
7.1.3(Application of Force (IS: 18297))	-	23000	-
7.1.4(Sequence of Testing (IS 18297))	-	23000	-
7.1.5.1(Mass (IS:18297))	-	23000	-
7.1.5.2((i) Face withdrawal of Screws (IS: 2380 P-14))	-	23000	-
7.1.5.2((ii) Density (IS 2380 P-3))	-	23000	-
7.2(Over Load Test (IS 18297))	-	23000	-
7.2.1(Overload Test - Vertical Static overload test)	-	23000	-
7.2.2(Overload Test - Horizontal Static overload test)	-	23000	-
Cabinet Hinges(Functional Test (IS: 18297))	-	23000	-
Cabinet Hinges(Functional Test (IS: 18297))	-	23000	-
7.3.2(First Vertical Static Load test (IS 18297))	-	23000	-
7.3.3(First Horizontal Static Load test (IS 18297))	-	23000	-
7.3.4(Slam shut test (IS 18297))	-	23000	-
7.3.6(Durability Test (IS 18297))	-	23000	-
7.3.7(Deflection Test (IS 18297))	-	23000	-
7.3.8(Second Vertical Static Test (IS 18297))	-	23000	-
7.3.9(Second Horizontal Static Test (IS: 18297))	-	23000	-
7.4(Crrosion Resistance (IS 18297))	-	23000	-
7.5(Finish (IS: 18297))	-	23000	-
7.3.1(Operating Forces)	-	23000	-

02 Jun, 2027

-
-

IS 17954 (2023)

TELESCOPIC BALL BEARING DRAWER SLIDE SPECIFICATION

23000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.2, Table- 2 (i)(Internal channel)	-	23000	-
Cl-4.2, Table- 2 (ii)(Outer channel)	-	23000	-
Cl-4.2, Table- 2 (iii)(Track up to 550 mm)	-	23000	-
Cl-4.2, Table- 2 (iv)(Track from 600 mm onwards)	-	23000	-
Cl-4.2, Table- 2 (v)(Ball cage)	-	23000	-
Cl-4.2, Table- 2 (vi)(Ball spacer)	-	23000	-
Cl-5(Components and Manufacture)	-	23000	-
Cl-5(Components and Manufacture)	-	23000	-
Cl-6.1(Preparatory Measures)	-	23000	-
Cl-6.2 (a)(Limiting Deviations- Force)	-	23000	-
Cl-6.2 (b)(Limiting Deviations- Speed)	-	23000	-
Cl-6.2 (c)(Limiting Deviations- Weights)	-	23000	-
Cl-6.2 (d)(Limiting Deviations- Dimension)	-	23000	-
Cl-6.3(Application of Forces)	-	23000	-
Cl-6.4(Testing Equipment)	-	23000	-
Cl-6.5(Sequence of testing)	-	23000	-
Cl-7(Vertical Load Test)	-	23000	-
Cl-8(Horizontal Load Test)	-	23000	-
Cl-9(Durability Test)	-	23000	-
Cl-10(Deflection Test)	-	23000	-
Cl-11(Slam Test)	-	23000	-
Cl-12(Finish)	-	23000	-
Cl-5.11(Ball)	-	23000	-
Cl-5.10(Rivets)	-	23000	-

02 Jun, 2027

-
-

IS/ISO 22702 (2018)

Utility lighters Safety specifications First Revision

20500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Flame generation)	-	20500	-
4.2(Flame heights)	-	20500	-
4.3(Flame- height adjustment)	-	20500	-
4.4("Resistance to Spitting or Sputtering and flaring")	-	20500	-
4.5(Flame extinction)	-	20500	-
4.6(Volumetric Displacement)	-	20500	-
5.2(Resistance to dropping)	-	20500	-
5.3(Resistance to elevated temperature)	-	20500	-
5.4(Burning behavior)	-	20500	-
5.5(Resistance to continuous burn)	-	20500	-
5.6(Resistance to cyclic burn)	-	20500	-
5.7(External Finish)	-	20500	-
5.8(Compatibility with fuel)	-	20500	-
5.9(Resistance to internal pressure)	-	20500	-
6(Refilling Test)	-	20500	-

02 Jun, 2027

-
-

IS/ISO 9994 (2018)

Lighters Safety specifications First Revision

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4(Flame Generation)	-	18000	-
Cl.4.2(Flame Height)	-	18000	-
Cl.4.3(Flame-Height adjustment)	-	18000	-
Cl.4.4(Resistance to spitting or sputtering and flaring)	-	18000	-
Cl.4.5(Flame Extinction)	-	18000	-
Cl.4.6(Volumetric displacement of Fuel)	-	18000	-
Cl.4.7(Mass of Fuel)	-	18000	-
Cl.5.1(External Finish)	-	18000	-
Cl.5.2(Compatibility of Fuel)	-	18000	-
Cl.5.3(Resistance to Fuel Loss)	-	18000	-
Cl.5.4(Resistance to dropping)	-	18000	-
Cl.5.5(Resistance to elevated Temperature)	-	18000	-
Cl.5.6(Resistance to internal Pressure)	-	18000	-
Cl.5.7(Burning Behavior)	-	18000	-
Cl.5.8(Resistance to cyclic burning)	-	18000	-
Cl.5.9(Resistance to Continue Burning)	-	18000	-
6.6, 6.6.3.1(Refilling test-IS/ISO 9994)	-	18000	-
6.6, 6.6.3.2(Refilling test-IS/ISO 9994)	-	18000	-

02 Jun, 2027

-
-

IS 4246 (2002)

Domestic gas stoves for use with liquefied petroleum gases - Specification (Fifth Revision)

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.24(Annexure E)(on no account the carbon monoxidel carbon dioxide ratio of the exhaust gases of any burner. operating at any consumption at which the burner is stable at gas inlet pressure from 2452 kN/m2 to 3432 kN/m2 (25 gf/cm2 to 35 gf/cm2), exceed 0.02.)	-	14000	-
Cl.23(There shall be no extinction of the flames on any of the burners operating at maximum consumption when the appliance is placed in a general (not localized) current of air with a velocity of 2 m/s, as measured with a rotating vane anemometer. The location of the appliance relative to neighboring walls and the direction of the draught shall be varied to correspond to likely conditions of appliance installation. This applies for all pressures from 2452 kN/m2 to 3432 kN/m2 (25 gf/cm2 to 35 gf/cm2).)	-	14000	-
24 (Annex - E)(Combustion (CO and CO2 ratio))	-	14000	-
4.1(Requirement)	-	14000	-
5(Materials)	-	14000	-
6(Design for Maintenance)	-	14000	-
7(Rigidity and Stability)	-	14000	-
8(Workmanship and Finish)	-	14000	-
9(Gas Taps)	-	14000	-
10(Injector Jets)	-	14000	-
11(Burners)	-	14000	-
12(Burner Pan Supports)	-	14000	-
13.1(Gas Soundness)	-	14000	-
13.2(Gas Leak Detector)	-	14000	-
14(Gas Inlet Connections)	-	14000	-
15(Strength and Rigidity)	-	14000	-
16(General Conditions of Test)	-	14000	-
17.1.1(Gas Consumption)	-	14000	-
18(Ignition and Flame Travel)	-	14000	-
19(Flame Stability)	-	14000	-
20(Noise Control)	-	14000	-
21(Flash Back)	-	14000	-
22(Formation of Soot)	-	14000	-
23(Resistance to Draught)	-	14000	-
24(Combustion)	-	14000	-
25(Fire Hazard and Limiting Temperature)	-	14000	-
26(Thermal Efficiency)	-	14000	-
27.1(Type Tests)	-	14000	-
27.2(Routine Tests)	-	14000	-
29(Marking)	-	14000	-
30(Packing)	-	14000	-

02 Jun, 2027

-
-

IS 13983 (1994)

Stainless Steel Sinks For Domestic Purposes

18500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9(Marking)	-	500	-
4(Type)	-	500	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Carbon Content)	-	800	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Silicon Content)	-	800	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Manganese Content)	-	800	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Nickel Content)	-	800	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Chromium Content)	-	800	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Sulphur Content)	-	800	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Phouphorous Content)	-	800	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Nitrogen Content)	-	800	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Carbon Content)	-	800	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Silicon Content)	-	800	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Manganese Content)	-	800	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Nickel Content)	-	800	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Chromium Content)	-	800	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Sulphur Content)	-	800	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Phouphorous Content)	-	800	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Nitrogen Content)	-	800	-
6(Thickness of sheet/strip)	-	500	-
6(Depth of bowl)	-	500	-
6(Internal dimensions of the bowl)	-	500	-
6(Bowl locating limits)	-	500	-
6(Co-ordinating sizes)	-	500	-
7.1(Consruction and workmanship)	-	500	-
7.1.1(Consruction and workmanship)	-	500	-
7.2(Consruction and workmanship)	-	500	-
7.2.1(Consruction and workmanship)	-	500	-
7.3(Drainers)	-	500	-
7.4(Waste outlet)	-	500	-
7.5(Tap holes)	-	200	-
7.6(Overflows)	-	200	-
8(Finish)	-	300	-
5(MATERIALS)	-	11000	-
6.1.1(Thickness of Sheet/Strip)	-	500	-
6.1.2(Thickness of Sheet/Strip)	-	500	-
6.2(Depth of Bowls)	-	500	-
6.3(Internal Dimensions of Bowls)	-	500	-
6.4.1(Bowl Locating Limits)	-	500	-
6.5(Coordinating Sizes)	-	500	-
7.1(CONSTRUCTION AND WORKMANSHIP)	-	500	-
7.1.1(CONSTRUCTION AND WORKMANSHIP)	-	500	-
7.2.1(CONSTRUCTION AND WORKMANSHIP)	-	500	-
7.3(CONSTRUCTION AND WORKMANSHIP)	-	500	-
7.4(Waste Outlet)	-	500	-
7.5(Tap Holes)	-	200	-
7.6(OVERFLOW)	-	200	-
Clause no. 4(types)	-	500	-
Caluse no. 5("Material -Austenitic stainless steel of Grade Designation")	-	500	-
Clause no. 6.1(Thickness of sheet)	-	500	-
Clause no. 6.2(Depth of Bowls)	-	500	-
Clause no. 6.3(Internal dimensions of bowls)	-	500	-
Clause no. 6.4(Bowl Locating Limits)	-	500	-
Clause no. 6.5, Table No. 1(Dimension of the sink)	-	500	-
Clause no. 7(Construction and workmanship)	-	500	-
Clause no. 8(Finish)	-	300	-
Clause no. 9(Mark)	-	500	-

02 Jun, 2027

-
-

IS 15833 (2009)

Stainless Steel Tower Bolts -specification

All Type

5000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.2(Carbon Content)	-	5000.00	-
Clause 4.2(Silicon)	-	5000.00	-
Clause 4.2(Manganese)	-	5000.00	-
Clause 4.2(nickel)	-	5000.00	-
Clause 4.2(Chromium)	-	5000.00	-
Clause 4.2(Sulphur)	-	5000.00	-
Clause 4.2(Phosphorus)	-	5000.00	-
Clause 4.2(Carbon Content)	-	5000.00	-
Clause 4.2(Silicon)	-	5000.00	-
Clause 4.2(Manganese)	-	5000.00	-
Clause 4.2(nickel)	-	5000.00	-
Clause 4.2(Chromium)	-	5000.00	-
Clause 4.2(Sulphur)	-	5000.00	-
Clause 4.2(Phosphorus)	-	5000.00	-
Clause 4.2(Mech)(Phosphorus)	-	5000.00	-
Clause 4.2(Mech)(Sulphur)	-	5000.00	-
Clause 4.2(Mech)(Chromium)	-	5000.00	-
Clause 4.2(Mech)(nickel)	-	5000.00	-
Clause 4.2(Mech)(Manganese)	-	5000.00	-
Clause 4.2(Mech)(Silicon)	-	5000.00	-
Clause 4.2(Mech)(Carbon Content)	-	5000.00	-
Cl 7(0)	-	5000.00	-
Cl 6(DIMENSIONS)	-	5000.00	-
Cl 6(DIMENSIONS)	-	5000.00	-
Cl 6(DIMENSIONS)	-	5000.00	-
Cl 6(DIMENSIONS)	-	5000.00	-
Cl 6(DIMENSIONS)	-	5000.00	-
Cl 6(DIMENSIONS)	-	5000.00	-
Cl 6(DIMENSIONS)	-	5000.00	-
Cl 6(DIMENSIONS)	-	5000.00	-
Cl 6(DIMENSIONS)	-	5000.00	-
Cl 6(DIMENSIONS)	-	5000.00	-
Cl 5(MANUFACTURE)	-	5000.00	-
Cl 4(MATERIAL)	-	5000.00	-
Cl 3(NOMINAL SIZES)	-	5000.00	-
Cl 3(NOMINAL SIZES)	-	5000.00	-
8(Marking)	-	5000.00	-

02 Jun, 2027

-
-

IS 15834 (2020)

Stainless Steel Sliding Door Bolts ( Aldrops ) for Use With Padlocks - Specification ( First Revision )

All Type

6500.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5(DIMENSIONS AND TOLERANCES)	-	6500.00	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	6500.00	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	6500.00	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	6500.00	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	6500.00	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	6500.00	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	6500.00	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	6500.00	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	6500.00	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	6500.00	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	6500.00	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	6500.00	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	6500.00	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	6500.00	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	6500.00	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	6500.00	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	6500.00	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	6500.00	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	6500.00	-
Cl 6(MANUFACTURE)	-	6500.00	-
Cl 7(FINISH)	-	6500.00	-
5(DIMENSIONS AND TOLERANCES)	-	6500.00	-
5(DIMENSIONS AND TOLERANCES)	-	6500.00	-
5(DIMENSIONS AND TOLERANCES)	-	6500.00	-
5(DIMENSIONS AND TOLERANCES)	-	6500.00	-
5(DIMENSIONS AND TOLERANCES)	-	6500.00	-
5(DIMENSIONS AND TOLERANCES)	-	6500.00	-
5(DIMENSIONS AND TOLERANCES)	-	6500.00	-
5(DIMENSIONS AND TOLERANCES)	-	6500.00	-
5(DIMENSIONS AND TOLERANCES)	-	6500.00	-
5(DIMENSIONS AND TOLERANCES)	-	6500.00	-
5(DIMENSIONS AND TOLERANCES)	-	6500.00	-
5(DIMENSIONS AND TOLERANCES)	-	6500.00	-
5(DIMENSIONS AND TOLERANCES)	-	6500.00	-
5(DIMENSIONS AND TOLERANCES)	-	6500.00	-
5(DIMENSIONS AND TOLERANCES)	-	6500.00	-
5(DIMENSIONS AND TOLERANCES)	-	6500.00	-
5(DIMENSIONS AND TOLERANCES)	-	6500.00	-
5(DIMENSIONS AND TOLERANCES)	-	6500.00	-
5(DIMENSIONS AND TOLERANCES)	-	6500.00	-
5(DIMENSIONS AND TOLERANCES)	-	6500.00	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	6500.00	-
6(MANUFACTURE)	-	6500.00	-
7(FINISH)	-	6500.00	-
8(Marking)	-	6500.00	-
8(Marking)	-	6500.00	-
Cl.4(Carbon)	-	6500.00	-
Cl.4(Sulphur)	-	6500.00	-
Cl.4(Phosphorus)	-	6500.00	-
Cl.4(Manganese)	-	6500.00	-
Cl.4(Silicon)	-	6500.00	-
Cl.4(Nickel)	-	6500.00	-
Cl.4(Chromium)	-	6500.00	-
Cl.4(Copper)	-	6500.00	-
Cl.4(Molybdenum)	-	6500.00	-
Cl.4(Nitrogen)	-	6500.00	-
Cl.4(Titanium)	-	6500.00	-
Cl.4(Niobium)	-	6500.00	-
Sub-Clause. 10.3.1(Dimension)	-	6500.00	-
Sub-Clause. 10.3.2(Tensile test)	-	6500.00	-
Sub-Clause. 10.3.3(corrosion resistance)	-	6500.00	-

02 Jun, 2027

-
-

IS 18800 (2023)

Stainless steel feeding bottle for infants -- Specification

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4.1(Carbon - IS 228 and its parts or any other intrumental/chemical methods)	-	30000	-
Cl.4.1(Silicon - IS 228 and its parts or any other intrumental/chemical methods)	-	30000	-
Cl.4.1(Manganese - IS 228 and its parts or any other intrumental/chemical methods)	-	30000	-
Cl.4.1(Nickel - IS 228 and its parts or any other intrumental/chemical methods)	-	30000	-
Cl.4.1(Chromium - IS 228 and its parts or any other intrumental/chemical methods)	-	30000	-
Cl.4.1(Sulphur - IS 228 and its parts or any other intrumental/chemical methods)	-	30000	-
Cl.4.1(Phosphorous - IS 228 and its parts or any other intrumental/chemical methods)	-	30000	-
Cl.4.1(Nitrogen - IS 228 and its parts or any other intrumental/chemical methods)	-	30000	-
Cl.4.1(Molybdenum - IS 228 and its parts or any other intrumental/chemical methods)	-	30000	-
Cl.4.1(Copper - IS 228 and its parts or any other intrumental/chemical methods)	-	30000	-
Cl.4.1(Other Elements - IS 228 and its parts or any other intrumental/chemical methods)	-	30000	-
5.1.1(Description)	-	30000	-
5.1.2(Manufacture, Workmanship, Finish and Appearance)	-	30000	-
5.1.3(Wall Thickness)	-	30000	-
5.1.4(Capacity)	-	30000	-
5.2(Mechanical Requirements)	-	30000	-
5.3.1(Leakage Test)	-	30000	-
5.3.2(Drop Test)	-	30000	-
5.3.3(Compressive Deformation Resistance)	-	30000	-
5.3.4(Permanency of Pigments of Printed Container)	-	30000	-
5.1.1(Description)	-	30000	-
5.1.2(Manufacture, Workmanship, Finish and Appearance)	-	30000	-
5.1.3(Wall Thickness)	-	30000	-
5.1.4(Capacity)	-	30000	-
5.2(Mechanical Requirements)	-	30000	-
5.3.1(Leakage Test)	-	30000	-
5.3.2(Drop Test)	-	30000	-
5.3.3(Compressive Deformation Resistance)	-	30000	-
5.3.4(Permanency of Pigments of Printed Container)	-	30000	-

02 Jun, 2027

-
-

IS 17790 (2022)

INSULATED FLASK FOR DOMESTIC USE SPECIFICATION

All Type

28500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Manufacture and Workmanship)	-	28500	-
5.3(Welding Defects)	-	28500	-
7.1(Material)	-	28500	-
7.1.2.1 & 7.1.2.2(Thickness)	-	28500	-
7.1.3(Coating Thickness)	-	28500	-
7.1.3(Material – coating cadmium)	-	28500	-
7.1.2.2(Bisphenol A (BPA))	-	28500	-
7.1.4.3(O-Ring / Washer- Defects)	-	28500	-
7.2(Capacity)	-	28500	-
7.3(Heat Retention Capability)	-	28500	-
7.4(Cold Retention Capability)	-	28500	-
7.5.1(Drop Impact Test)	-	28500	-
7.5.2(Pendulum Impact Test)	-	28500	-
7.6(Fixing Strength of the Handle)	-	28500	-
7.7(Test for Strength of Shoulder Strap)	-	28500	-
7.8(Test for strength of cord)	-	28500	-
7.9(Leakage Test)	-	28500	-
7.10(Joint Leak Test)	-	28500	-
7.11(Staining Test)	-	28500	-
7.13(Seepage test)	-	28500	-
7.14(Test for Lever, device for operating Or regulating flow test)	-	28500	-
7.15(Test for length of the shoulder cap)	-	28500	-
7.16(Stability of Flask)	-	28500	-
7.17(Pour Test)	-	28500	-
9.1(Marking)	-	28500	-
9.2(BIS certification marking)	-	28500	-
10(Packaging)	-	28500	-
7.1.3(Coating- Adhesion test)	-	28500	-
7.1.3(Coating - Thickness test)	-	28500	-
7.1.3(Coating- Salt water corrosion test)	-	28500	-
7.1.4.1(Stopper)	-	28500	-
7.1.4.2(O-ring/washer- Overall migration)	-	28500	-
7.1.4.2(O-ring/washer- Shore hardness)	-	28500	-
7.1.4.2(O-ring/washer- BPA)	-	28500	-
7.1.5(Auxillary closure)	-	28500	-
7.12(Check for PUF (Polyurethane Foam) or Any Other Similar Thermal Insulation Material)	-	28500	-
7.18(Endurance Test for O-Ring, Washer and Stopper)	-	28500	-

02 Jun, 2027

-
-

Bureau of Indian Standards

The National Standards Body of India

Arihant Analytical Laboratory Pvt. Ltd., Sonipat

Plot No. 272, Sector-57, Phase-IV, HSIIDC Kundli, Sonipat Haryana, Sonipat, Sonipat, Haryana, 131028

9310022355 aalkundli@gmail.com

Scope List