BIS - LIMS (Laboratory Information Management System)

Arihant Analytical Laboratory Pvt. Ltd., Sonipat

Plot No. 272, Sector-57, Phase-IV, HSIIDC Kundli, Sonipat Haryana, Sonipat, Sonipat, Haryana, 131028

9310022355 aalkundli@gmail.com

Scope List

Reset

48 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 17526 (2021)

STAINLESS STEEL VACUUM FLASKS - SPECIFICATION

All Type

25700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Manufacture and Workmanship)	-	25700	-
5.3(Manufacture and Workmanship)	-	25700	-
7.1.1(Material- Inner containers)	-	25700	-
7.1.2(Outer protective case and accessories - Thickness)	-	25700	-
7.1.2.1(Coating - Limit of lead)	-	25700	-
7.1.2.1(Coating - Limit of Cadmium)	-	25700	-
7.1.4(Auxillary closure "Bisphenol A (BPA)")	-	25700	-
7.3(Capacity)	-	25700	-
7.4(Heat Retention Capability)	-	25700	-
7.5(Cold Retention Capability)	-	25700	-
7.6.1(Drop Impact Test)	-	25700	-
7.6.2(Pendulum Impact Test)	-	25700	-
7.7(Fixing Strength of the Handle)	-	25700	-
7.8(Test for Strength of Shoulder Strap)	-	25700	-
7.8.1(Test for strength of cord)	-	25700	-
7.9(Leakage Test)	-	25700	-
7.10(Joint Leak Test)	-	25700	-
7.11(Staining Test)	-	25700	-
7.12(Length of the Shoulder Strap)	-	25700	-
7.13(Stability of Flask/Bottle)	-	25700	-
7.14(Pour Test)	-	25700	-
9.1(Marking)	-	25700	-
9.2(BIS certification marking)	-	25700	-
10(Packaging)	-	25700	-
7.1.2(Outer protective case and accessories - Material)	-	25700	-
7.1.2.1(Coating- Thickness test)	-	25700	-
7.1.2.1(Coating- Adhesion test)	-	25700	-
7.1.2.1(Coating- Salt Water corrosion test)	-	25700	-
7.2(Arrangement for holding and suspension)	-	25700	-
7.15 (Amendment 1)(Endurance test for O-Ring, Washer and Stopper)	-	25700	-
7.1.3(Overall migration)	-	25700	-
7.1.3 (Amendment 1)(O-Ring and washer- Hardness)	-	25700	-
7.1.3 (Amendment 1)(O-Ring and washer-- BPA)	-	25700	-
7.1.3(Stopper Material)	-	25700	-

02 Jun, 2027

-
-

IS 13801 (2013)

Chequered Cement Concrete Tiles -

All Type

5500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
(Cl 7, 8 &9)(Length, Breadth, Thickness, Difference in length of side between the longest side and shorterst side in the sample shall not exceed 1 mm, Half tiles, Difference in Thickness between the thickest and thinnest tile in the sample shall not exceed 10 percent of minimum thickness, Depth of chequred groove, Thickness of wearing layer.)	-	500	-
Cl 12.1(Concavity & Convexity )	-	500	-
Cl 12.2(Longest gap between the arms of the square and the edge of the title shall not exceed 2 percent of the length.)	-	500	-
Cl 12.3(Shall not exceed 1 percent of the length of the edge.)	-	500	-
Cl 12.4(Water absorption)	-	500	-
Cl 12.5(Wet transverse strength)	-	1500	-
Cl 12.6(Resistance to wear)	-	1500	-
Cl 11(Finish)	-	500	-
Annex G3.1(Aluminium oxide content)	-	500	-
(Cl 7, 8 &9)(Length, Breadth, Thickness, Difference in length of side between the longest side and shorterst side in the sample shall not exceed 1 mm, Half tiles, Difference in Thickness between the thickest and thinnest tile in the sample shall not exceed 10 percent of minimum thickness, Depth of chequred groove, Thickness of wearing layer.)	-	500	-
Cl 12.1(Concavity & Convexity )	-	500	-
Cl 12.2(Longest gap between the arms of the square and the edge of the title shall not exceed 2 percent of the length.)	-	500	-
Cl 12.3(Shall not exceed 1 percent of the length of the edge.)	-	500	-
Cl 12.4(Water absorption)	-	500	-
Cl 12.5(Wet transverse strength)	-	1500	-
Cl 12.6(Resistance to wear)	-	1500	-
Cl 11(Finish)	-	500	-
(Cl 7, 8 &9)(Length, Breadth, Thickness, Difference in length of side between the longest side and shorterst side in the sample shall not exceed 1 mm, Half tiles, Difference in Thickness between the thickest and thinnest tile in the sample shall not exceed 10 percent of minimum thickness, Depth of chequred groove, Thickness of wearing layer.)	-	500	-
Cl 12.1(Concavity & Convexity )	-	500	-
Cl 12.2(Longest gap between the arms of the square and the edge of the title shall not exceed 2 percent of the length.)	-	500	-
Cl 12.3(Shall not exceed 1 percent of the length of the edge.)	-	500	-
Cl 12.4(Water absorption)	-	500	-
Cl 12.5(Wet transverse strength)	-	1500	-
Cl 12.6(Resistance to wear)	-	1500	-
Cl 11(Finish)	-	500	-
Cl 11(Finish)	-	500	-
Cl 12.6(Resistance to wear)	-	1500	-
Cl 12.5(Wet transverse strength)	-	1500	-
Cl 12.4(Water absorption)	-	500	-
Cl 12.3(Shall not exceed 1 percent of the length of the edge.)	-	500	-
Cl 12.2(Longest gap between the arms of the square and the edge of the title shall not exceed 2 percent of the length.)	-	500	-
Cl 12.1(Concavity & Convexity )	-	500	-
(Cl 7, 8 &9)(Length, Breadth, Thickness, Difference in length of side between the longest side and shorterst side in the sample shall not exceed 1 mm, Half tiles, Difference in Thickness between the thickest and thinnest tile in the sample shall not exceed 10 percent of minimum thickness, Depth of chequred groove, Thickness of wearing layer.)	-	500	-
8.3(Thickness of wearing layer)	-	500	-

02 Jun, 2027

-
-

IS 16218 (2014)

Forks - Specification

All Type

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(food grade stainless steel.)	-	14500	-
3.2 (i)(Brass as parent material)	-	14500	-
3.2(ii)(Brass plated with pure silver)	-	14500	-
3.3(Plastic handle)	-	14500	-
4(Shapes and Dimensions)	-	14500	-
5(Manufacture)	-	14500	-
6.1(Workmanship)	-	14500	-
6.2(Finish)	-	14500	-
9(Marking)	-	14500	-
10(Packing)	-	14500	-

02 Jun, 2027

-
Included w.e.f. 02.09.2025

IS 18755 (2024)

Tri-ply SS-AL-SS material used for manufacture of utensils and kitchen appliances Specification

All Type

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(Supply of material and designation)	-	12500	-
Cl-5(Manufacturer)	-	12500	-
Cl-6(Aluminium for use as matrix)	-	12500	-
Cl-6(Top-surface of the aluminium matrix)	-	12500	-
Cl-6(Bottom-surface of the aluminium matrix)	-	12500	-
Cl-7.1.1(Tensile properties)	-	12500	-
Cl-7.1.1(Apparent Yield Strength)	-	12500	-
Cl-7.1.1(Tensile Strength Mpa,)	-	12500	-
Cl-7.1.2(Test Specimen)	-	12500	-
Cl-7.1.3(Test Parameters)	-	12500	-
Cl-7.2.1(Bond strength of Tri-Ply)	-	12500	-
Cl-7.2.2(Sample Preparation and Test Specimen)	-	12500	-
Cl-7.2.3(Test Apparatus)	-	12500	-
Cl-7.2.4(Procedure)	-	12500	-
Cl-8.1(Sample of suitable size)	-	12500	-
Cl-8.2(specimen for peel strength)	-	12500	-
Cl-8.3, table-3(T-Peel Strength, N/mm, Min SS304 and Al 19500 interface)	-	12500	-
Cl-8.3, table-3(T-Peel Strength, N/mm, Min SS430 and Al 19500 interface)	-	12500	-
Cl-9.1(Thickness)	-	12500	-
Cl-9.2(Diameter)	-	12500	-
Cl-9.3(Flatness)	-	12500	-
Cl-10(surface finish)	-	12500	-
Cl-11(Workmanship, finish and appearance)	-	12500	-
Cl-14(Marking)	-	12500	-

02 Jun, 2027

-
Included w.e.f.29.07.2025

IS 737 (2024)

WROUGHT ALUMINIUM AND ALUMINIUM ALLOY SHEET AND STRIP FOR GENERAL ENGINEERING PURPOSES SPECIFICATION (Fifth Revision)

All Type

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4(Ordering Information - IS 737)	-	12500	-
Cl. 4 (a)(Grade/ Thickness - IS 737)	-	12500	-
Cl. 4 (b)(Condition - IS 737)	-	12500	-
Cl. 4 (c)(Quantity in Kg - IS 737)	-	12500	-
Cl. 4 (d)(Size - Thickness X Width X Length (T X W X L) in mm for sheets and (T X W) in mm for Strips/ Coils - IS 737)	-	12500	-
Cl. 4 (e)(Coil ID and Coil Weight for Strips/ Coils - IS 737)	-	12500	-
Cl. 4 (f)(Core/ Spool Requirement for Coils - IS 737)	-	12500	-
Cl. 4 (g)(Packing Mode - IS 737)	-	12500	-
Cl. 5(Supply for Material - IS 737/ IS 10259)	-	12500	-
Cl. 6(Freedom from Defects - IS 737)	-	12500	-
Cl. 7(Chemical Composition - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	12500	-
Cl. 7(Si - IS 504 (Part-1)/ ASTM E 1251/ IS 11035)	-	12500	-
Cl. 7(Fe - IS 504 (Part-2)/ ASTM E 1251/ IS 11035)	-	12500	-
Cl. 7(Cu - IS 504 (Part-3)/ ASTM E 1251/ IS 11035)	-	12500	-
Cl. 7(Mn - IS 504 (Part-5)/ ASTM E 1251/ IS 11035)	-	12500	-
Cl. 7(Mg - IS 504 (Part-6)/ ASTM E 1251/ IS 11035)	-	12500	-
Cl. 7(Cr - IS 504 (Part-8)/ ASTM E 1251/ IS 11035)	-	12500	-
Cl. 7(Zn - IS 504 (Part-4)/ ASTM E 1251/ IS 11035)	-	12500	-
Cl. 7(Ti - IS 504 (Part-11)/ ASTM E 1251/ IS 11035)	-	12500	-
Cl. 7(Others (Each) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	12500	-
Cl. 7(Others (Total) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	12500	-
Cl. 7(Al - IS 504)	-	12500	-
Cl. 8(Mechanical Properties - IS 1608 (Part-1))	-	12500	-
Cl. 8.1(0.2% Proof Stress - IS 1608 (Part-1))	-	12500	-
Cl. 8.1(Tensile Strength - IS 1608 (Part-1))	-	12500	-
Cl. 8.1(Elongation on 50mm Gauge Length - IS 1608 (Part-1))	-	12500	-
Cl. 8.2(Bend Test - IS 1599)	-	12500	-
Cl. 9(Condition - IS 737/ IS 5052)	-	12500	-
Cl. 10(Dimensions and Tolerances - IS 737/ IS 2676)	-	12500	-
Cl. 11(Selection of Test Samples - IS 737)	-	12500	-
Cl. 11.1(Sheet and Strip of Aluminium or Non - Heat Treatable Aluminium Alloy - IS 737)	-	12500	-
Cl. 11.2(Sheet and Strip of Heat - Treatable Aluminium Alloys - IS 737)	-	12500	-
Cl. 12(Retests - IS 737/ IS 10259)	-	12500	-
Cl. 13(Packaging - IS 737/ IS 10259)	-	12500	-
Cl. 13.1(Marking - IS 737)	-	12500	-

02 Jun, 2027

-
Included w.e.f 30.06.2025

IS 1660 (2024)

Wrought and Cast Aluminium Utensils Specification ( Second Revision )

All Type

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3.1.1, 3.1.2(Minimum Thickness of Sheet)	-	25000	-
Cl-3.1.3, Table-2(Minimum Thickness at the Bottom)	-	25000	-
Cl-3.1.3, Table-2(Minimium Thickness of Wall at the Top Edge)	-	25000	-
Cl-3.1.3, Table-2(Minimum Cover Thickness)	-	25000	-
Cl-4.1(Main body of utensil)	-	25000	-
Cl-4.1(Cast cookware)	-	25000	-
Cl-4.1(Other aluminum components and parts)	-	25000	-
Cl-4.1.1(Lids (material))	-	25000	-
Cl-4.1.1(Minimum thickness of lid)	-	25000	-
Cl-4.1.2(Minimum thickness of glass)	-	25000	-
Cl-4.1.2(Material of rim)	-	25000	-
Cl-4.1.2(Minimum thickness of rim)	-	25000	-
Cl-4.2(Material of strips)	-	25000	-
Cl-4.2(Stainless steel handles, rivets and fittings)	-	25000	-
Cl-4.3(Clips of lunch box)	-	25000	-
Cl-4.3(Clips of lunch box)	-	25000	-
Cl-4.3(Rivets used in lunch box)	-	25000	-
Cl-4.4(Screws, studs/nuts, and locking loop)	-	25000	-
Cl-4.5(Rivets for fixing of handles)	-	25000	-
Cl-4.5(Material of cap)	-	25000	-
Cl-4.6(Strips used for flame guards)	-	25000	-
Cl-4.6(stainless steel)	-	25000	-
Cl-5(Fabrication)	-	25000	-
Cl-6(Shape and Dimensions)	-	25000	-
Cl-7.1(Handles, when fitted)	-	25000	-
Cl-7.2(Handles)	-	25000	-
Cl-7.3 (Cl- 4.1 of IS 13395)(Construction)	-	25000	-
Cl-7.3 (Cl- 4.2 of IS 13395)(Materials)	-	25000	-
Cl-7.3 (Cl- 4.3 of IS 13395)(Selection and Size)	-	25000	-
Cl-7.3 (Cl- 4.4 of IS 13395)(Position of Handle and Knob with Respect to Cookware)	-	25000	-
Cl-7.3 (Cl- 4.5 of IS 13395)(Attachment to Cookware)	-	25000	-
Cl-7.3 (Cl- 5.2 of IS 13395)(Bending Strength)	-	25000	-
Cl-7.3 (Cl- 5.3 of IS 13395)(Torque Strength)	-	25000	-
Cl-7.3 (Cl- 5.4 of IS 13395)(Impact Strength)	-	25000	-
Cl-7.3 (Cl- 5.5 of IS 13395)(Fatigue Resistance)	-	25000	-
Cl-7.3 (Cl- 5.6 of IS 13395)(Leakage)	-	25000	-
Cl-7.3 (Cl- 5.7 of IS 13395)(Thermal Insulation)	-	25000	-
Wrought and Cast Aluminium Utensils — Specification(Heat Resistance)	-	25000	-
Cl-7.3 (Cl- 5.9 of IS 13395)(Washing Resistance (Type Test))	-	25000	-
Cl-7.3 (Cl- 5.10 of IS 13395)(Burning Resistance)	-	25000	-
Cl-8(Workmanship and Finish)	-	25000	-
Cl-8.3(Utensils, if anodized, fully or partially)	-	25000	-
Cl-8.3(Minimum nominal thickness)	-	25000	-
Cl-8.3(Thickness of hard anodized)	-	25000	-
Cl-8.3(Finish and appearance of hard anodized)	-	25000	-
Cl-8.3(Abrasion resistance of hard anodized)	-	25000	-
Cl-8.3(Colour of hard anodized)	-	25000	-
Cl-8.3(Hardness of hard anodized)	-	25000	-
Wrought and Cast Aluminium Utensils — Specification(Lid of the cookware)	-	25000	-
Cl-8.5(Non-stick unreinforced PTFE)	-	25000	-
Cl-8.6(Ceramic coating)	-	25000	-
Cl-8.7(The thickness test, adhesion test)	-	25000	-
Cl-8.7(Minimum thickness of coating)	-	25000	-
Cl-8.7.1(Dry heat the cookware)	-	25000	-
Cl-8.8(Requirements of PTFE)	-	25000	-
Cl-8.9(Material for induction plate)	-	25000	-
Cl-8.9(Test for Induction compatible base)	-	25000	-
Cl-8.10.1(Tests for Lunch Boxes- Performance Test)	-	25000	-
Cl-8.10.1(Tests for Lunch Boxes- Performance Test)	-	25000	-
Cl-8.10.2(Tests for Lunch Boxes- Ground Nut Oil Test for Leakage)	-	25000	-
Cl-8.11.1(Test(s) on Tempered Glass Lid- Fragmentation Test)	-	25000	-
Cl-8.11.2(Test(s) on Tempered Glass Lid-Ball Drop Test)	-	25000	-
Cl-8.11.3(Test(s) on Tempered Glass Lid- Thermal Shock Test)	-	25000	-
Cl-8.11.4(Test(s) on Tempered Glass Lid- Free Fall Test)	-	25000	-
Cl-9.1(Normal Capacity)	-	25000	-
Cl-9.2(Normal Capacity of internal diameter)	-	25000	-

02 Jun, 2027

-
Included w.e.f.29.07.2025

IS 9396 : Part 2 (2012)

Round open top sanitary cans for foods and drinks - Specification: Part 2 sizes and general requirements (Second Revision)

All Type

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(Diameter)	-	15000	-
4.1.2(Capacities and Tinplate Thicknes)	-	15000	-
4.3(Internal Finish)	-	15000	-
4.4(External Treatment)	-	15000	-
5.1(Air Pressure Test)	-	15000	-
6( Packing And Conditions Of Supply)	-	15000	-
7(Marking)	-	15000	-

02 Jun, 2027

-
Included w.e.f.04.07.2025

IS 9396 : Part 1 (1987)

Specification for round open top sanitary cans for foods and drinks: Part 1 tinplate (First Revision)

All Type

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Tinplate- Carbon %)	-	15000	-
3.1(Tinplate- Manganese %)	-	15000	-
3.1(Tinplate- Phosphorus %)	-	15000	-
3.1(Tinplate- Sulphur %)	-	15000	-
3.1(Tinplate- Silicon %)	-	15000	-
3.1(Tinplate- Copper %)	-	15000	-
3.3(Tin Coating Mass- Body)	-	15000	-
3.3(Tin Coating Mass- Ends)	-	15000	-
3.2(Tinplate Thickness and Dimension : Thickness)	-	15000	-
3.2(Tinplate Thickness and Dimension : Feather Edge: the thickness when measured at a distance of 10 mm from the mill trimmed edge shall not deviate from the actual centre thickness by more than −6 %)	-	15000	-
3.2(Tinplate Thickness and Dimension: width)	-	15000	-
3.2(Tinplate Thickness and Dimension : length)	-	15000	-
3.2(Tinplate Thickness and Dimension : Edge camber)	-	15000	-
3.2(Tinplate Thickness and Dimension :Out of squareness of sheet )	-	15000	-
3.2(Tinplate Thickness and Dimension : Flatness)	-	15000	-
3.4(Surface Finish)	-	15000	-
3.4(Surface Finish)	-	15000	-
3.5 Appendix A(Tin Grain Size)	-	15000	-
3.6 Appendix B(Iron Solution Value)	-	15000	-
3.7(Surface Oil Coating)	-	15000	-
3.9(Shape)	-	15000	-
3.1O(Mechanical Properties )	-	15000	-
3.1O(Mechanical Properties )	-	15000	-
3.1(Tinplate- Carbon %)	-	-	-
3.1(Tinplate- Manganese %)	-	-	-
3.1(Tinplate- Phosphorus %)	-	-	-
3.1(Tinplate- Sulphur %)	-	-	-
3.1(Tinplate- Silicon %)	-	-	-
3.1(Tinplate- Copper %)	-	-	-
3.3(Tin Coating Mass- Body)	-	-	-
3.3(Tin Coating Mass- Ends)	-	-	-
3.2(Tinplate Thickness and Dimension : Thickness)	-	-	-
3.2(Tinplate Thickness and Dimension : Feather Edge: the thickness when measured at a distance of 10 mm from the mill trimmed edge shall not deviate from the actual centre thickness by more than −6 %)	-	-	-
3.2(Tinplate Thickness and Dimension: width)	-	-	-
3.2(Tinplate Thickness and Dimension : length)	-	-	-
3.2(Tinplate Thickness and Dimension : Edge camber)	-	-	-
3.2(Tinplate Thickness and Dimension :Out of squareness of sheet )	-	-	-
3.2(Tinplate Thickness and Dimension : Flatness)	-	-	-
3.4(Surface Finish)	-	-	-
3.4(Surface Finish)	-	-	-
3.5 Appendix A(Tin Grain Size)	-	-	-
3.6 Appendix B(Iron Solution Value)	-	-	-
3.7(Surface Oil Coating)	-	-	-
3.9(Shape)	-	-	-
3.1O(Mechanical Properties )	-	-	-
3.1O(Mechanical Properties )	-	-	-

02 Jun, 2027

-
Included w.e.f.04.07.2025

IS 16286 (2014)

Spoons - Specification

All Type

21000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(food grade stainless steel.)	-	21000.00	-
3.3(Plastic handle)	-	21000.00	-
4(Shapes and Dimensions)	-	21000.00	-
5.1(Manufacture)	-	21000.00	-
5.2(Workmanship)	-	21000.00	-
5.3(Finish)	-	21000.00	-
8(Marking)	-	21000.00	-
9(Packing)	-	21000.00	-
Cl-6.1(Staining Test)	-	21000.00	-
Cl-6.2(Bending Test)	-	21000.00	-
Cl-6.3(Load Test)	-	21000.00	-
Cl-6.4.1(Boiling)	-	21000.00	-
Cl-6.4.2(Impact)	-	21000.00	-
Cl-6.4.3(Staining)	-	21000.00	-

02 Jun, 2027

-
Included w.e.f 18.07.2025

IS 9873 : Part 9 (2017)

Safety of Toys Part 9 Certain Phthalates Esters in Toys and Children's Products

All type

3500.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	500	-
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	500	-
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	500	-
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	500	-
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	500	-
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	500	-
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	500	-
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	500	-

02 Jun, 2027

-
Included w.e.f.12.09.2025

IS 9873 : Part 3 (2017)

Safety of toys: Part 3 migration of certain elements (Second Revision)

All

3000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1 - Table 1(Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	-
4.1 - Table 1(Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	-
4.1 - Table 1(Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	-
4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	-
4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	-
4.1 - Table 1(Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	-
4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	-
4.1 - Table 1(Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	-
4.1 - Table 1(Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	-
4.1 - Table 1(Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	-
4.1 - Table 1(Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	-
4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	-
4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	-
4.1 - Table 1(Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	-
4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	-
4.1 - Table 1(Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	-

02 Jun, 2027

-
Included w.e.f 14.08.2025

IS 2185 : Part 2 (1983)

Specification for concrete masonry units: Part 2 hollow and solid lightweight concrete blocks (First Revision)

All Type

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.7(Moisture Movement)	-	15000	-
8.6(Drying shrinkage)	-	15000	-
8.5, Table 1(Water Absorption)	-	15000	-
8.4, Table 1(Compressive strength)	-	15000	-
8.3(Block Density)	-	15000	-
3.2.5(Thickness of Web)	-	15000	-
3.2.5(Face Shell Thickness)	-	15000	-
3.2(Width)	-	15000	-
3.2(Height)	-	15000	-
3.2(Length)	-	15000	-
8.1(General)	-	15000	-
8.2(Deimension (Length))	-	15000	-
8.2(Deimension (Height))	-	15000	-
8.2(Deimension (Width))	-	15000	-
8.3(Block Density)	-	15000	-
8.4(Compressive Strength)	-	15000	-
8.5(Water Absorption)	-	15000	-
8.6(Drying Shrinkage)	-	15000	-
8.7(Moisture Movement)	-	15000	-

02 Jun, 2027

-
Included w.e.f 13.01.2025

IS 2185 : Part 1 (2005)

Concrete masonry units - Specification: Part 1 hollow and solid concrete blocks (Third Revision)

All Type

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.1(PHYSICAL REQUIREMENTS-General)	-	15000	-
9.2 & 4.2(PHYSICAL REQUIREMENTS-Nominal Dimensions 1.Length 2.Hight 3. Width)	-	15000	-
9.2 & 4.2.3(Nominal Dimensions-variation in the length of units )	-	15000	-
9.2 & 4.2.3(Nominal Dimensions -variation in height and width of units )	-	15000	-
9.2 & 4.2.4, Table-1(Nominal Dimensions-thickness of the face shell)	-	15000	-
9.2 & 4.2.4, Table-1(Nominal Dimensions-thickness of the Web shell)	-	15000	-
9.3 & 5.1 & 5.2 Table 2(PHYSICAL REQUIREMENTS-Blocks Density - 1.Hollow (Open and Closed Cavity) Concrete Block- Grade Aor Grade B 2.Solid Concrete Block — Grade C)	-	15000	-
9.4- Table 2(PHYSICAL REQUIREMENTS - Compressive Strength 1.Minimum Average Compressive Strength of Units 2.Minimum Average Compressive Strength of Individual Unit)	-	15000	-
9.5(PHYSICAL REQUIREMENTS -Water Absorption)	-	15000	-
9.6(PHYSICAL REQUIREMENTS -Drying Shrinkage)	-	15000	-
9.7(PHYSICAL REQUIREMENTS -Moisture Movement)	-	15000	-
15(Marking)	-	15000	-

02 Jun, 2027

-
Included w.e.f 13.01.2025

IS 2185 : Part 3 (1984)

Concrete Masonry Units Part 3 Autoclaved Cellular Aerated Concrete Blocks

All Grade/Type/Size Designation

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Physical requirments)	-	25000	-
8.2(Physical requirments-Dimensions-Length)	-	25000	-
8.2(Physical requirments-Dimensions-Height)	-	25000	-
8.2(Physical requirments-Dimensions-Width)	-	25000	-
8.3(Physical requirments- Block density)	-	25000	-
8.4(Physical requirments- Compressive strength)	-	25000	-
8.5(Thermal Conductivity)	-	25000	-
8.6( Drying Shrinkage )	-	25000	-
8.4, 9.2 & 11.3(Indivisual Moisture Content)	-	25000	-
8.4, 9.2 & 11.3(Indivisual Bulk density)	-	25000	-
8.4, 9.2 & 11.3 & Table 1(Indivisual Compressive strength)	-	25000	-
8.3 & 9.1(Indivisual Moisture Content)	-	25000	-
8.3 & 9.1 Table 1(Indivisual Block Density)	-	25000	-
3.2 & 8.2(Indivisual Height)	-	25000	-
3.2 & 8.2(Indivisual Width)	-	25000	-
3.2 & 8.2(Indivisual Length)	-	25000	-
8.6, 9.4 & 11.5(Grade)	-	25000	-
3.4(Special Faces)	-	25000	-
3.3(Faces & Arises)	-	25000	-
3.1(Shape)	-	25000	-
8.1.1(General (Exposed wall construction))	-	25000	-
5(MATERIALS)	-	25000	-
7(SURFACE TEXTURE AND FINISH)	-	25000	-
9.3(Thermal Conductivity)	-	25000	-
15(Marking)	-	25000	-

02 Jun, 2027

-
Included w.e.f 30.05.2025

IS 456 (2000)

Plain and reinforced concrete - Code of practice (Fourth Revision)

Construction Water

2000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4-(a)-IS: 3025 (P-22)(Volume of 0.02 N NaOH to neutralized 100 ml of water using phenolphthalein indicator)	-	300.00	We have declared our charges. However we shall accept BIS approved rates.
5.4-(b)-IS: 3025 (P-23)(Volume of 0.02 N H2SO4 to neutralized 100 ml of water using mixed indicator)	-	300.00	We have declared our charges. However we shall accept BIS approved rates.
Cl 5.4 .2(pH)	-	200.00	We have declared our charges. However we shall accept BIS approved rates.
Cl 5.4 Table 1 (i)(Organic Solids)	-	250.00	We have declared our charges. However we shall accept BIS approved rates.
Cl 5.4 Table 1 (ii)(Inorganic Solids)	-	250.00	We have declared our charges. However we shall accept BIS approved rates.
Cl 5.4 Table 1 (iii)(Sulphate)	-	200.00	We have declared our charges. However we shall accept BIS approved rates.
Cl 5.4 Table 1 (iv)(Chloride)	-	300.00	We have declared our charges. However we shall accept BIS approved rates.
Cl 5.4 Table 1 (v)(Suspended Matter)	-	200.00	We have declared our charges. However we shall accept BIS approved rates.

02 Jun, 2027

-
-

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

Diameter 8mm to 32mm TMT Steel

15500.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.2 Table -2 (Nominal Mass)	-	500.00	We have declared our charges. However we shall accept BIS approved rates.
Cl. 8.1 Table 3(Yield Stress (YS))	-	800.00	We have declared our charges. However we shall accept BIS approved rates.
Cl. 8.1 Table 3(Elongation, percentage)	-	0.00	We have declared our charges. However we shall accept BIS approved rates.
Cl. 8.1 Table 3(Tensile Strength (TS))	-	1200.00	We have declared our charges. However we shall accept BIS approved rates.
Cl. 9.3, Table 4(Bend Test )	-	1000.00	We have declared our charges. However we shall accept BIS approved rates.
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	1000.00	We have declared our charges. However we shall accept BIS approved rates.
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-	500.00	We have declared our charges. However we shall accept BIS approved rates.
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON )	-	1000.00	We have declared our charges. However we shall accept BIS approved rates.
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR)	-	1000.00	We have declared our charges. However we shall accept BIS approved rates.
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 PHOSPHURS)	-	1000.00	We have declared our charges. However we shall accept BIS approved rates.
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 NITROGEN)	-	1000.00	We have declared our charges. However we shall accept BIS approved rates.
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON +EQUIVELENT )	-	6500.00	We have declared our charges. However we shall accept BIS approved rates.
5.7(Pull-out test - IS:2770(P1))	-	5000.00	We have declared our charges. However we shall accept BIS approved rates.
Cl.4.2 of IS 1786 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500.00	We have declared our charges. However we shall accept BIS approved rates.
Cl.4.2 of IS 1786 (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500.00	We have declared our charges. However we shall accept BIS approved rates.
Cl.4.2 of IS 1786 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500.00	We have declared our charges. However we shall accept BIS approved rates.
Cl.4.2 of IS 1786 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500.00	We have declared our charges. However we shall accept BIS approved rates.
Cl.4.2 of IS 1786 (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500.00	We have declared our charges. However we shall accept BIS approved rates.
Cl.4.2 of IS 1786 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500.00	We have declared our charges. However we shall accept BIS approved rates.

02 Jun, 2027

-
Pull out test is already under exclusion, and the same will be under exclusion in the renewed scope Exclusion: Pull out test

IS 1489 (Part 1) (2015)

Portland pozzolana cement - Specification: Part 1 fly Ash Based

PPC

8000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	400.00	We have declared our charges. However we shall accept BIS approved rates.
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	500.00	We have declared our charges. However we shall accept BIS approved rates.
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	500.00	We have declared our charges. However we shall accept BIS approved rates.
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	400.00	We have declared our charges. However we shall accept BIS approved rates.
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	700.00	We have declared our charges. However we shall accept BIS approved rates.
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	500.00	We have declared our charges. However we shall accept BIS approved rates.
7 -Table 2- i(Fineness 4031 Part 2)	-	500.00	We have declared our charges. However we shall accept BIS approved rates.
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	500.00	We have declared our charges. However we shall accept BIS approved rates.
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	700.00	We have declared our charges. However we shall accept BIS approved rates.
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	400.00	We have declared our charges. However we shall accept BIS approved rates.
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	400.00	We have declared our charges. However we shall accept BIS approved rates.
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	500.00	We have declared our charges. However we shall accept BIS approved rates.
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	700.00	We have declared our charges. However we shall accept BIS approved rates.
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	800.00	We have declared our charges. However we shall accept BIS approved rates.
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	500.00	We have declared our charges. However we shall accept BIS approved rates.
Clause 7Table 2 SI No. (v)(Transverse Strength, 72 ± 1 h)	-	500	We have declared our charges. However we shall accept BIS approved rates.
Clause 7Table 2 SI No. (v)(Transverse Strength, 168 ± 2 h)	-	700	We have declared our charges. However we shall accept BIS approved rates.
Clause 7 Table 2 SI No. (v) (Transverse Strength, 672 ± 4 h)	-	800	We have declared our charges. However we shall accept BIS approved rates.

02 Jun, 2027

-
Transverse strength test is already under exclusion, and the same will be under exclusion in the renewed scope Exclusion: Transverse test (Table no.3)

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

OPC-33, OPC-43, OPC-53

9000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	2300.00	We have declared our charges. However we shall accept BIS approved rates.
6.1 Table-2 iii.(Insoluble residue)	-	400.00	We have declared our charges. However we shall accept BIS approved rates.
6.1 Table-2 iv(Magnesia)	-	400.00	We have declared our charges. However we shall accept BIS approved rates.
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	300.00	We have declared our charges. However we shall accept BIS approved rates.
6 - Table - 1 vi(Loss on ignition - Cl 4.2 of IS 4032:1985)	-	300.00	We have declared our charges. However we shall accept BIS approved rates.
6.1 Table-2 vii(Chloride content)	-	250.00	We have declared our charges. However we shall accept BIS approved rates.
6 - Table - 1 viii(Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	250.00	We have declared our charges. However we shall accept BIS approved rates.
6.1 Table-2 viii(Alkali content)	-	300.00	We have declared our charges. However we shall accept BIS approved rates.
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	1000.00	We have declared our charges. However we shall accept BIS approved rates.
7 Table-3 i.(Fineness)	-	400.00	We have declared our charges. However we shall accept BIS approved rates.
7 Table-3 ii a(Expansion by Le Chatelier)	-	500.00	We have declared our charges. However we shall accept BIS approved rates.
7 Table-3 ii b(Expansion by Autoclave)	-	800.00	We have declared our charges. However we shall accept BIS approved rates.
7 Table-3 iii a(Setting Time Initial)	-	500.00	We have declared our charges. However we shall accept BIS approved rates.
7 Table-3 iii b(Setting Time Final)	-	500.00	We have declared our charges. However we shall accept BIS approved rates.
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	300.00	We have declared our charges. However we shall accept BIS approved rates.
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	400.00	We have declared our charges. However we shall accept BIS approved rates.
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	600.00	We have declared our charges. However we shall accept BIS approved rates.
7 Table-3 v(Transverse Strength - IS 4031 Part 8 (Optional))	-	1000	We have declared our charges. However we shall accept BIS approved rates.

02 Jun, 2027

-
Transverse strength test is already under exclusion, and the same will be under exclusion in the renewed scope Exclusion: Transverse test (Table no.3)

Bureau of Indian Standards

The National Standards Body of India

Arihant Analytical Laboratory Pvt. Ltd., Sonipat

Plot No. 272, Sector-57, Phase-IV, HSIIDC Kundli, Sonipat Haryana, Sonipat, Sonipat, Haryana, 131028

9310022355 aalkundli@gmail.com

Scope List