BIS - LIMS (Laboratory Information Management System)

Bharat Test House Pvt. Ltd. 1668 Sonipat

1668 (DIV-II), HSIIDC INDUSTRIAL ESTATE, RAI, DIST. SONEPAT, HARYANA, INDIA, Sonipat, Sonipat, Haryana, 131029

9310314585 bthdiv2@bharattesthouse.com

Scope List

Reset

223 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

211

IS 319 (2007)

Free cutting brass bars, rods and section - Specification (Fifth Revision)

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Freedom from defects)	-	100	-
7.0(Dimension and Tolerances)	-	100	-
8.1 Table 1(Cu)	-	400	-
8.1 Table 1(Pb)	-	400	-
8.1 Table 1(Fe)	-	400	-
8.1 Table 1(Total other impurities excluding iron)	-	400	-
8.1 Table 1(Zn)	-	400	-
9.1 Table-2(Tensile Strength)	-	250	-
9.1 Table-2(Elongation)	-	200	-
9.2(Vickers Hardness)	-	200	-
10.1(Mercurous Nitrate Test)	-	250	-
14(Marking)	-	100	-
14(Marking)	-	0	-

-
-

212

IS 5522 (2014)

Stainless steel sheets and strips for utensils - Specification (Third Revision)

Stainless Steel Sheets and Strips for Utensils

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl . 6 .0(Freedom from defect)	-	100	-
Cl. 7.1 & 7.2 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl. 7.1 & 7.2 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl. 7.1 & 7.2 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl. 7.1 & 7.2 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl. 7.1 & 7.2 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl. 7.1 & 7.2 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl. 7.1 & 7.2 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl. 7.1 & 7.2 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
8.2, Table 3(Tensile Strength, N/mm2)	-	300	-
8.2, Table 3(Proof Stress, N/mm2)	-	300	-
8.2, Table 3(Elongation, %)	-	200	-
8.3(Hardness , max-IS 1500 or IS 1501 (Part 1) or IS 1586)	-	400	-
8.4(Bend Test)	-	400	-
8.5(Erichsen Cupping Test)	-	400	-
10.1(Thickness, mm)	-	50	-
10.2(width, mm)	-	50	-
10.3(Length, mm)	-	50	-
10.4(Flatness,mm)	-	50	-
10.5(Camber, mm)	-	100	-
11(Surface Finish)	-	100	-
13(Marking)	-	100	-
Cl . 6 .0(Freedom from defect)	-	0	-
Cl. 7.1 & 7.2 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 7.1 & 7.2 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 7.1 & 7.2 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 7.1 & 7.2 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 7.1 & 7.2 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 7.1 & 7.2 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 7.1 & 7.2 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 7.1 & 7.2 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
8.2, Table 3(Tensile Strength, N/mm2)	-	0	-
8.2, Table 3(Proof Stress, N/mm2)	-	0	-
8.2, Table 3(Elongation, %)	-	0	-
8.3(Hardness , max-IS 1500 or IS 1501 (Part 1) or IS 1586)	-	0	-
8.4(Bend Test)	-	0	-
8.5(Erichsen Cupping Test)	-	0	-
10.1(Thickness, mm)	-	0	-
10.2(width, mm)	-	0	-
10.3(Length, mm)	-	0	-
10.4(Flatness,mm)	-	0	-
10.5(Camber, mm)	-	0	-
11(Surface Finish)	-	0	-
13(Marking)	-	0	-

-
-

213

IS 737 (2008)

Wrought aluminium and aluminium alloy sheet and strip for general engineering purposes - Specification (Fourth Revision)

4800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Freedom from defects)	-	100	-
6 Table-1(Al)	-	400	-
6 Table-1(Cu)	-	300	-
6 Table-1(Mg)	-	400	-
6 Table-1(Si)	-	400	-
6 Table-1(Fe)	-	400	-
6 Table-1(Mn)	-	400	-
6 Table-1(Zn)	-	300	-
6 Table-1(Ti)	-	400	-
6 Table-1(Cr)	-	400	-
6 Table-1(Cu+Si+Fe)	-	0	-
6 Table-1(Cu+Si+Fe+Mn+Zn)	-	0	-
6 Table-1(Cu+Mg+Si+Fe+Mn+Zn)	-	0	-
6 Table-1(Zr)	-	400	-
6 Table-1(Cr+Mn)	-	0	-
7 Table-2(Tensile Strength)	-	200	-
7 Table-2(Elongation)	-	150	-
7 Table-2(0.2 % Proof Stress)	-	150	-
7 Table-2(Bend Test)	-	200	-
9(Dimension - IS 2676)	-	100	-
12(Marking)	-	100	-
9(Dimension - IS 2676)	-	100	-
12(Marking)	-	100	-
9(Dimension - IS 2676)	-	0	-
12(Marking)	-	0	-
9(Dimension - IS 2676)	-	0	-
12(Marking)	-	0	-
9(Dimension - IS 2676)	-	0	-
12(Marking)	-	0	-

-
-

214

IS 15997 (2012)

Low nickel austenitic stainless steel sheet and strip for utensils and kitchen appliances - Specification

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Freedom From Defects)	-	100	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Copper -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	-
9.3, Table 3 (Tensile Strength, Mpa)	-	300	-
9.3, Table 3 (Yield Strength, Mpa)	-	200	-
9.3, Table 3 (Elongation, %)	-	250	-
9.4(Erichsen Cupping Test,(Average depth of cupping) mm)	-	250	-
11(Surface finish)	-	100	-
12(Dimensions)	-	100	-
6(Freedom From Defects)	-	0	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Copper -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
9.3, Table 3 (Tensile Strength, Mpa)	-	0	-
9.3, Table 3 (Yield Strength, Mpa)	-	0	-
9.3, Table 3 (Elongation, %)	-	0	-
9.4(Erichsen Cupping Test,(Average depth of cupping) mm)	-	0	-
11(Surface finish)	-	0	-
12(Dimensions)	-	0	-
17(Marking)	-	100	-
6(Freedom From Defects)	-	0	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Copper -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
9.3, Table 3 (Tensile Strength, Mpa)	-	0	-
9.3, Table 3 (Yield Strength, Mpa)	-	0	-
9.3, Table 3 (Elongation, %)	-	0	-
9.4(Erichsen Cupping Test,(Average depth of cupping) mm)	-	0	-
11(Surface finish)	-	0	-
12(Dimensions)	-	0	-
17(Marking)	-	0	-

-
-

215

IS 4454 : Part 4 (2001)

Steel wires for mechanical springs: Part 4 stainless steel wire (Second Revision)

Stainless Steel Wire

8200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 1. Cl.1.1,1.2,7.1 & 7.2(Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	650	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	650	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	650	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Suphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	650	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Phosphorous- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	650	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Chromium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	650	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Molybdenum- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	650	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Nickel- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	650	-
8(Freedom from defects)	-	100	-
9(Dimensions & Tolerances)	-	300	-
10.1.1, Table 4(Tensile strength)	-	500	-
10.1.1, Table 4(Reduction in area)	-	200	-
10.2(Wrapping test)	-	500	-
10.3(Reverse torsion test)	-	300	-
10.4(Cast of the wire)	-	300	-
10.5(Bend test)	-	400	-
10.6(Coiling test)	-	200	-
11(Surface finish)	-	100	-
15.1(Marking)	-	100	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Suphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Phosphorous- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Chromium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Molybdenum- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Nickel- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	-
8(Freedom from defects)	-	0	-
9(Dimensions & Tolerances)	-	0	-
10.1.1, Table 4(Tensile strength)	-	0	-
10.1.1, Table 4(Reduction in area)	-	0	-
10.2(Wrapping test)	-	0	-
10.3(Reverse torsion test)	-	0	-
10.4(Cast of the wire)	-	0	-
10.5(Bend test)	-	0	-
10.6(Coiling test)	-	0	-
11(Surface finish)	-	0	-
15.1(Marking)	-	0	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Suphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Phosphorous- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Chromium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Molybdenum- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Nickel- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	-
8(Freedom from defects)	-	0	-
9(Dimensions & Tolerances)	-	0	-
10.1.1, Table 4(Tensile strength)	-	0	-
10.1.1, Table 4(Reduction in area)	-	0	-
10.2(Wrapping test)	-	0	-
10.3(Reverse torsion test)	-	0	-
10.4(Cast of the wire)	-	0	-
10.5(Bend test)	-	0	-
10.6(Coiling test)	-	0	-
11(Surface finish)	-	0	-
15.1(Marking)	-	0	-

-
-

216

IS 9873 : Part 7 (2017)

Safety of toys: Part 7 requirements and test methods for finger paints

5100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.5.2 - Table 3(Impurities - Benzo (α) pyrene - Annex C)	-	150	-
4.5.2 - Table 3(Impurities - Polychlorinated biphenyls - Annex C)	-	150	-
4.5.2 - Table 3(IImpurities- Hexachlorobenzene - Annex C)	-	150	-
4.6 - Table 4(Taste and smell - Finger paints shall not be sweetened, flavoured or fragranced - Cl 4.6)	-	150	-
4.6 - Table 4(Taste and smell - Finger paints shall not be sweetened, flavoured or fragranced - Cl 4.6)	-	150	-
4.7(pH value - ISO 787-9)	-	150	-
4.9(N-Nitrosamines - N-nitrosodiethanolamine (NDELA) - n EN 71–12:2013, 7.2.1 and Clause 8)	-	150	-
4.2.2 - Table 1, 2(Finger Paint shall not contain Azo colourants that by cleavage of one or more azo groups can produce the primary aromatic amines - Annex C)	-	4050	-

-
-

217

IS 277 (2018)

Galvanized steel strips and sheets (Plain And Corrugated) - Specification (Seventh Revision)

2600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(carbon)	-	100	-
5.1(sulphur)	-	100	-
5.1(phosphorus)	-	100	-
5.1(manganese)	-	100	-
5.1(silicon )	-	100	-
5.1(nitrogen)	-	100	-
5.1(copper)	-	100	-
5.1(micro alloy)	-	500	-
5.1(aluminium)	-	100	-
cl 5.1, T-1, designation For GP 550(C)	-	100	-
cl 5.1, T-1, designation For GP 450(C)	-	100	-
cl 5.1, T-1, designation For GP 350 class-2(C)	-	100	-
cl 5.1, T-1, designation For GP 350 class-1(C)	-	100	-
cl 5.1, T-1, designation For GP 300(C)	-	100	-
cl 5.1, T-1, designation For GP275(C)	-	100	-
cl 5.1, T-1, designation For GP250(C)	-	100	-
cl 5.1, T-1, designation For GP230(C)	-	100	-
cl 5.1, T-1, designation For GPIF(C)	-	100	-
cl 5.1, T-1, designation For GPED(C)	-	100	-
cl 5.1, T-1, designation For GPD(C)	-	100	-
cl 5.1, T-1, designation For GPL(C)	-	100	-
cl 5.1, T-1, designation For GC(C)	-	100	-
cl 5.1, T-1, designation For GPH (C)	-	100	-
cl 5.1, T-1, designation For GP (C)	-	100	-
Cl 10(Galvanising Test)	-	100	-
7.4(Mass of Coating: Single Spot Test)	-	200	-
7.4(Mass of Coating: Triple Spot Test)	-	200	-
7.1 & 10.2(Mass of Coating: Single Spot Test)	-	200	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	200	-
cl 5.1, T-1, Note-6, For reinforced steel(P)	-	100	-
cl 5.1, T-1, designation For GP 550(P)	-	100	-
cl 5.1, T-1, designation For GP 350 class-2(P)	-	100	-
cl 5.1, T-1, designation For GP 350 class-1(P)	-	100	-
cl 5.1, T-1, designation For GP 300(P)	-	100	-
cl 5.1, T-1, designation For GP275(P)	-	100	-
cl 5.1, T-1, designation For GP250(P)	-	100	-
cl 5.1, T-1, designation For GP230(P)	-	100	-
cl 5.1, T-1, designation For GPIF(P)	-	100	-
cl 5.1, T-1, designation For GPED(P)	-	100	-
cl 5.1, T-1, designation For GPD(P)	-	100	-
cl 5.1, T-1, designation For GPL(P)	-	100	-
cl 5.1, T-1, designation For GC(P)	-	100	-
cl 5.1, T-1, designation For GPH (P)	-	100	-
cl 5.1, T-1, designation For GP (P)	-	100	-
cl 5.1, T-1, designation For GP 550(S)	-	100	-
cl 5.1, T-1, designation For GP 450(S)	-	100	-
cl 5.1, T-1, designation For GP 350 class-1(S)	-	100	-
cl 5.1, T-1, designation For GP 300(S)	-	100	-
cl 5.1, T-1, designation For GP275(S)	-	100	-
cl 5.1, T-1, designation For GP250(S)	-	100	-
cl 5.1, T-1, designation For GP230(S)	-	100	-
cl 5.1, T-1, designation For GPIF(S)	-	100	-
cl 5.1, T-1, designation For GPED(S)	-	100	-
cl 5.1, T-1, designation For GPD(S)	-	100	-
cl 5.1, T-1, designation For GPL(S)	-	100	-
cl 5.1, T-1, designation For GC(S)	-	100	-
cl 5.1, T-1, designation For GPH (S)	-	100	-
cl 5.1, T-1, designation For GP (S)	-	100	-
cl 5.1, T-1, designation For GP 550(Mn)	-	100	-
cl 5.1, T-1, designation For GP 450(Mn)	-	100	-
cl 5.1, T-1, designation For GP 350 class-2(Mn)	-	100	-
cl 5.1, T-1, designation For GP 350 class-1(Mn)	-	100	-
cl 5.1, T-1, designation For GP 300(Mn)	-	100	-
cl 5.1, T-1, designation For GP275(Mn)	-	100	-
cl 5.1, T-1, designation For GP250(Mn)	-	100	-
cl 5.1, T-1, designation For GPIF(Mn)	-	100	-
cl 5.1, T-1, designation For GP230(Mn)	-	100	-
cl 5.1, T-1, designation For GPED(Mn)	-	100	-
cl 5.1, T-1, designation For GPD(Mn)	-	100	-
cl 5.1, T-1, designation For GPL(Mn)	-	100	-
cl 5.1, T-1, designation For GC(Mn)	-	100	-
cl 5.1, T-1, designation For GPH (Mn)	-	100	-
cl 5.1, T-1, designation For GP (Mn)	-	100	-
Cl 12(Workmanship)	-	100	-
Cl 13(Weight)	-	50	-
Cl 14(Length, Width & Thickness)	-	100	-
Cl 8.2(Press)	-	100	-
5.1(Titanium)	-	100	-
Cl. 17(Marking )	-	50	-
Cl.12(Freedom from defects)	-	50	-
Cl. 8.1 (Cl. 8.1 (Percentage Elongation ))	-	100	-
Cl. 8.1 (Cl. 8.1 (Yield Stress))	-	100	-
Cl. 8.1 (Cl. 8.1 (Tensile Strength))	-	100	-
cl 5.1, T-1, Note-5, For Microalloying elements(B)	-	50	-
cl 5.1, T-1, Note-5, For Microalloying elements(V)	-	100	-
cl 5.1, T-1, Note-5, For Microalloying elements(Nb)	-	100	-
cl 5.1, T-1, Note-5, For Microalloying elements(Nb+V+Ti+B)	-	50	-
Cl 10(Galvanising Test)	-	0	-
Cl 12(Workmanship)	-	0	-
Cl 13(Weight)	-	0	-
Cl 14(Length, Width & Thickness)	-	0	-
Cl 8.2(Press)	-	0	-
Cl 10(Galvanising Test)	-	0	-
Cl 12(Workmanship)	-	0	-
Cl 13(Weight)	-	0	-
Cl 14(Length, Width & Thickness)	-	0	-
Cl 8.2(Press)	-	0	-

-
-

218

IS 6527 (1995)

Stainless steel wire rods - Specification (First Revision)

Stainless Steel Wire Rod

8600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(The wire rods shall be smooth on surface and free from harmful surface defects)	-	100	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Carbon)	-	500	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Sulphur)	-	500	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Phosphorous)	-	500	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Manganese)	-	500	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Silicon)	-	500	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Nitrogen)	-	500	-
7, Table 1of IS:6527 (Designation X30Cr13)(Copper)	-	500	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Titanium)	-	500	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Niobium)	-	500	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Nickel)	-	500	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Chromium)	-	500	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Molybdenum)	-	500	-
Cl 9(Tensile & Hardness)	-	500	-
Cl. 9 .1 Table 3(0.2 % Proof Stress )	-	500	-
Cl. 9 .1 Table 3(Elongation)	-	400	-
Cl 10(Diameter & Out Of Round)	-	100	-
10 & 10.1, Dia over 20 mm (Out of round)	-	0	-
10 & 10.1, Dia over 20 mm (Size, Tolerance)	-	0	-
10 & 10.1, Dia over 16 mm upto 20 mm (Out of round)	-	0	-
10 & 10.1, Dia over 16 mm upto 20 mm (Size, Tolerance)	-	0	-
10 & 10.1, Dia over 9.5 mm upto 16 mm (Out of round)	-	0	-
10 & 10.1, Dia over 9.5 mm upto 16 mm (Size, Tolerance)	-	0	-
10 & 10.1, Dia- (5.5-9.5 mm)(Out of round)	-	0	-
10 & 10.1, Dia- (5.5-9.5 mm)(Size, Tolerance)	-	0	-
13(Corrosion resistance-IS 10461,Part-1 & 2)	-	300	-
15(Marking)	-	100	-
6(The wire rods shall be smooth on surface and free from harmful surface defects)	-	100	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Carbon)	-	500	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Sulphur)	-	500	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Phosphorous)	-	500	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Manganese)	-	500	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Silicon)	-	500	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Nitrogen)	-	500	-
7, Table 1of IS:6527 (Designation X30Cr13)(Copper)	-	500	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Titanium)	-	500	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Niobium)	-	500	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Nickel)	-	500	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Chromium)	-	500	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Molybdenum)	-	500	-
Cl 9(Tensile & Hardness)	-	500	-
Cl. 9 .1 Table 3(0.2 % Proof Stress )	-	500	-
Cl. 9 .1 Table 3(Elongation)	-	500	-
Cl 10(Diameter & Out Of Round)	-	100	-
10 & 10.1, Dia over 20 mm (Out of round)	-	0	-
10 & 10.1, Dia over 20 mm (Size, Tolerance)	-	0	-
10 & 10.1, Dia over 16 mm upto 20 mm (Out of round)	-	0	-
10 & 10.1, Dia over 16 mm upto 20 mm (Size, Tolerance)	-	0	-
10 & 10.1, Dia over 9.5 mm upto 16 mm (Out of round)	-	0	-
10 & 10.1, Dia over 9.5 mm upto 16 mm (Size, Tolerance)	-	0	-
10 & 10.1, Dia- (5.5-9.5 mm)(Out of round)	-	0	-
10 & 10.1, Dia- (5.5-9.5 mm)(Size, Tolerance)	-	0	-
13(Corrosion resistance-IS 10461,Part-1 & 2)	-	300	-
15(Marking)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr17Ni12Mo2)(Ultimate Tensile Strength)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr17Ni12Mo2)(Ultimate Tensile Strength)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr17Ni12Mo2)(Ultimate Tensile Strength)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X07Cr18Ni9)(Ultimate Tensile Strength)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr18Ni10)(Ultimate Tensile Strength)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr18Ni11)(Ultimate Tensile Strength)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X20Cr13)(Ultimate Tensile Strength)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X12Cr13)(Ultimate Tensile Strength)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr13)(Ultimate Tensile Strength)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr17Ni12Mo2)(0.2% Proof Stress)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr17Ni12Mo2)(0.2% Proof Stress)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr17Ni12Mo2)(0.2% Proof Stress)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X07Cr18Ni9)(0.2% Proof Stress)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr18Ni10)(0.2% Proof Stress)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr18Ni11)(0.2% Proof Stress)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr13)(0.2% Proof Stress)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr17Ni12Mo2)(%Elongation)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr17Ni12Mo2)(%Elongation)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr17Ni12Mo2)(%Elongation)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X07Cr18Ni9)(%Elongation)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr18Ni10)(%Elongation)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr18Ni11)(%Elongation)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X12Cr13)(%Elongation)	-	500	-
13(Corrosion Resistance - IS 10461)	-	300	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Carbon)	-	500	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Carbon)	-	500	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Carbon)	-	500	-
7, Table 1of IS:6527 (Designation X04Cr13)(Carbon)	-	500	-
7, Table 1of IS:6527 (Designation X30Cr13)(Carbon)	-	500	-
7, Table 1of IS:6527 (Designation X20Cr13)(Carbon)	-	500	-
7, Table 1of IS:6527 (Designation X12Cr13)(Carbon)	-	500	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Sulphur)	-	500	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Sulphur)	-	500	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Sulphur)	-	500	-
7, Table 1of IS:6527 (Designation X30Cr13)(Sulphur)	-	500	-
7, Table 1of IS:6527 (Designation X20Cr13)(Sulphur)	-	500	-
7, Table 1of IS:6527 (Designation X04Cr13)(Sulphur)	-	500	-
7, Table 1of IS:6527 (Designation X12Cr13)(Sulphur)	-	500	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Phosphorous)	-	500	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Phosphorous)	-	500	-
7, Table 1of IS:6527 (Designation X30Cr13)(Phosphorous)	-	500	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Phosphorous)	-	500	-
7, Table 1of IS:6527 (Designation X04Cr13)(Phosphorous)	-	500	-
7, Table 1of IS:6527 (Designation X12Cr13)(Phosphorous)	-	500	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Manganese)	-	500	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Manganese)	-	500	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Manganese)	-	500	-
7, Table 1of IS:6527 (Designation X30Cr13)(Manganese)	-	500	-
7, Table 1of IS:6527 (Designation X20Cr13)(Manganese)	-	500	-
7, Table 1of IS:6527 (Designation X12Cr13)(Manganese)	-	500	-
7, Table 1of IS:6527 (Designation X04Cr13)(Manganese)	-	500	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Silicon)	-	500	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Silicon)	-	500	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Silicon)	-	500	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Silicon)	-	500	-
7, Table 1of IS:6527 (Designation X30Cr13)(Silicon)	-	500	-
7, Table 1of IS:6527 (Designation X20Cr13)(Silicon)	-	500	-
7, Table 1of IS:6527 (Designation X12Cr13)(Silicon)	-	500	-
7, Table 1of IS:6527 (Designation X04Cr13)(Silicon)	-	500	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Copper)	-	500	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Copper)	-	500	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Copper)	-	500	-
7, Table 1of IS:6527 (Designation X12Cr13)(Copper)	-	500	-
7, Table 1of IS:6527 (Designation X04Cr13)(Copper)	-	500	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Titanium)	-	500	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Titanium)	-	500	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Titanium)	-	500	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Chromium)	-	500	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Chromium)	-	500	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Chromium)	-	500	-
7, Table 1of IS:6527 (Designation X30Cr13)(Chromium)	-	500	-
7, Table 1of IS:6527 (Designation X12Cr13)(Chromium)	-	500	-
7, Table 1of IS:6527 (Designation X04Cr13)(Chromium)	-	500	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Niobium)	-	500	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Niobium)	-	500	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Niobium)	-	500	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Nickel)	-	500	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Nickel)	-	500	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Nickel)	-	500	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Nickel)	-	500	-
7, Table 1of IS:6527 (Designation X20Cr13)(Nickel)	-	500	-
7, Table 1of IS:6527 (Designation X30Cr13)(Nickel)	-	500	-
7, Table 1of IS:6527 (Designation X04Cr13)(Nickel)	-	500	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Molybdenum)	-	500	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Molybdenum)	-	500	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Molybdenum)	-	500	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Molybdenum)	-	500	-
7, Table 1of IS:6527 (Designation X30Cr13)(Molybdenum)	-	500	-

-
-

219

IS 9873 : Part 9 (2017)

Safety of Toys Part 9 Certain Phthalates Esters in Toys and Children's Products

5100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	2550		Bis (2-ethyl hexyl phthalate (DEHP) + Dibutyl phthalate (DBP) + Benzyl butyl phthalate (BBP)
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	2550		Di-isononyl phthalate (DINP) + Di-isodecyl phthalate (DIDP) + Di-n-octyl phthalate (DNOP)

-
-

220

IS 6603 (2001)

Stainless steel bars and flats - Specification (First Revision)

Stainless Steel Bars and Flats

8200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Freedom from defects:)	-	100	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Carbon -Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	500	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Silicon- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	500	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Manganese- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	500	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Nickel -Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	500	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Chromium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	500	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Molybdenum- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	500	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Titanium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	500	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Niobium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	500	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Sulphur- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	500	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Phosphorus- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	500	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Others (Nitrogen)- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	500	-
9.1, Table 3(0.2 Percent Proof Stress, MPa)	-	200	-
9.2, Table 3(Tensile Strength, MPa)	-	500	-
9.3, Table 3(Elongation ,Percent)	-	200	-
9.4, Table 3(Annealed Hardness, HB-IS 1500: Pt 1)	-	400	-
Cl. 9.3 Table 3(Bend Test)	-	400	-
9.5, Table 3(Charpy Impact Test, J-IS 1499)	-	300	-
12(Dimensions & Tolerances, mm-IS 6603)	-	300	-
12(Diameter, mm)	-	0	-
12(Out of Round , mm)	-	0	-
12(Length , mm)	-	0	-
12(Variation in Straightness)	-	0	-
Cl. 12 Table 9, 11 & 13 (Square Size)	-	0	-
Cl. 12 Table 11,13 & 14(Thickness of Flat)	-	0	-
Cl. 12 Table 11,13 & 14(Width of Flat)	-	0	-
Cl. 12 Table 10 & 13(Hexagonal Size)	-	0	-
Cl. 12 Table 9(Out of Square)	-	0	-
Cl. 12 Table 10(Maximum Differences in Three Measurements for Hexagons)	-	0	-
15(Marking)	-	100	-
6(Freedom from defects:)	-	0	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Carbon -Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	0	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Silicon- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	0	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Manganese- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	0	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Nickel -Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	0	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Chromium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	0	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Molybdenum- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	0	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Titanium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	0	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Niobium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	0	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Sulphur- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	0	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Phosphorus- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	0	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Others (Nitrogen)- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	0	-
9.1, Table 3(0.2 Percent Proof Stress, MPa)	-	0	-
9.2, Table 3(Tensile Strength, MPa)	-	0	-
9.3, Table 3(Elongation ,Percent)	-	0	-
9.4, Table 3(Annealed Hardness, HB-IS 1500: Pt 1)	-	0	-
Cl. 9.3 Table 3(Bend Test)	-	0	-
9.5, Table 3(Charpy Impact Test, J-IS 1499)	-	0	-
12(Dimensions & Tolerances, mm-IS 6603)	-	0	-
12(Diameter, mm)	-	0	-
12(Out of Round , mm)	-	0	-
12(Length , mm)	-	0	-
12(Variation in Straightness)	-	0	-
Cl. 12 Table 9, 11 & 13 (Square Size)	-	0	-
Cl. 12 Table 11,13 & 14(Thickness of Flat)	-	0	-
Cl. 12 Table 11,13 & 14(Width of Flat)	-	0	-
Cl. 12 Table 10 & 13(Hexagonal Size)	-	0	-
Cl. 12 Table 9(Out of Square)	-	0	-
Cl. 12 Table 10(Maximum Differences in Three Measurements for Hexagons)	-	0	-
15(Marking)	-	0	-
Cl.14.1(Corrosion Resistance- IS 10461(Part1))	-	100	-
Cl.14.1(Corrosion Resistance- IS 10461(Part2))	-	100	-
6(Freedom from defects:)	-	0	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Carbon -Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	0	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Silicon- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	0	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Manganese- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	0	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Nickel -Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	0	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Chromium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	0	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Molybdenum- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	0	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Titanium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	0	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Niobium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	0	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Sulphur- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	0	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Phosphorus- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	0	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Others (Nitrogen)- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	0	-
9.1, Table 3(0.2 Percent Proof Stress, MPa)	-	0	-
9.2, Table 3(Tensile Strength, MPa)	-	0	-
9.3, Table 3(Elongation ,Percent)	-	0	-
9.4, Table 3(Annealed Hardness, HB-IS 1500: Pt 1)	-	0	-
Cl. 9.3 Table 3(Bend Test)	-	0	-
9.5, Table 3(Charpy Impact Test, J-IS 1499)	-	0	-
12(Dimensions & Tolerances, mm-IS 6603)	-	0	-
12(Diameter, mm)	-	0	-
12(Out of Round , mm)	-	0	-
12(Length , mm)	-	0	-
12(Variation in Straightness)	-	0	-
Cl. 12 Table 9, 11 & 13 (Square Size)	-	0	-
Cl. 12 Table 11,13 & 14(Thickness of Flat)	-	0	-
Cl. 12 Table 11,13 & 14(Width of Flat)	-	0	-
Cl. 12 Table 10 & 13(Hexagonal Size)	-	0	-
Cl. 12 Table 9(Out of Square)	-	0	-
Cl. 12 Table 10(Maximum Differences in Three Measurements for Hexagons)	-	0	-
15(Marking)	-	100	-
Cl.14.1(Corrosion Resistance- IS 10461(Part1))	-	0	-
Cl.14.1(Corrosion Resistance- IS 10461(Part2))	-	0	-
6(Freedom from defects:)	-	0	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Carbon -Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	0	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Silicon- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	0	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Manganese- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	0	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Nickel -Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	0	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Chromium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	0	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Molybdenum- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	0	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Titanium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	0	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Niobium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	0	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Sulphur- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	0	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Phosphorus- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	0	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Others (Nitrogen)- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	0	-
9.1, Table 3(0.2 Percent Proof Stress, MPa)	-	0	-
9.2, Table 3(Tensile Strength, MPa)	-	0	-
9.3, Table 3(Elongation ,Percent)	-	0	-
9.4, Table 3(Annealed Hardness, HB-IS 1500: Pt 1)	-	0	-
Cl. 9.3 Table 3(Bend Test)	-	0	-
9.5, Table 3(Charpy Impact Test, J-IS 1499)	-	0	-
12(Dimensions & Tolerances, mm-IS 6603)	-	0	-
12(Diameter, mm)	-	0	-
12(Out of Round , mm)	-	0	-
12(Length , mm)	-	0	-
12(Variation in Straightness)	-	0	-
Cl. 12 Table 9, 11 & 13 (Square Size)	-	0	-
Cl. 12 Table 11,13 & 14(Thickness of Flat)	-	0	-
Cl. 12 Table 11,13 & 14(Width of Flat)	-	0	-
Cl. 12 Table 10 & 13(Hexagonal Size)	-	0	-
Cl. 12 Table 9(Out of Square)	-	0	-
Cl. 12 Table 10(Maximum Differences in Three Measurements for Hexagons)	-	0	-
15(Marking)	-	0	-
Cl.14.1(Corrosion Resistance- IS 10461(Part1))	-	0	-
Cl.14.1(Corrosion Resistance- IS 10461(Part2))	-	0	-
6(Freedom from defects:)	-	-	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Carbon -Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	-	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Silicon- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	-	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Manganese- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	-	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Nickel -Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	-	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Chromium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	-	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Molybdenum- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	-	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Titanium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	-	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Niobium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	-	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Sulphur- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	-	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Phosphorus- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	-	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Others (Nitrogen)- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	-	-
9.1, Table 3(0.2 Percent Proof Stress, MPa)	-	-	-
9.2, Table 3(Tensile Strength, MPa)	-	-	-
9.3, Table 3(Elongation ,Percent)	-	-	-
9.4, Table 3(Annealed Hardness, HB-IS 1500: Pt 1)	-	-	-
Cl. 9.3 Table 3(Bend Test)	-	-	-
9.5, Table 3(Charpy Impact Test, J-IS 1499)	-	-	-
12(Dimensions & Tolerances, mm-IS 6603)	-	-	-
12(Diameter, mm)	-	-	-
12(Out of Round , mm)	-	-	-
12(Length , mm)	-	-	-
12(Variation in Straightness)	-	-	-
Cl. 12 Table 9, 11 & 13 (Square Size)	-	-	-
Cl. 12 Table 11,13 & 14(Thickness of Flat)	-	-	-
Cl. 12 Table 11,13 & 14(Width of Flat)	-	-	-
Cl. 12 Table 10 & 13(Hexagonal Size)	-	-	-
Cl. 12 Table 9(Out of Square)	-	-	-
Cl. 12 Table 10(Maximum Differences in Three Measurements for Hexagons)	-	-	-
15(Marking)	-	-	-
Cl.14.1(Corrosion Resistance- IS 10461(Part1))	-	-	-
Cl.14.1(Corrosion Resistance- IS 10461(Part2))	-	-	-

-
-

221

IS 13395 (2021)

Performance of Handles and Handle Assemblies Attached to Cookware - Specification ( First Revision )

6800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Construction)	-	30	-
4.2(Materials)	-	20	-
4.3(Selection and Size)	-	20	-
4.4(Position of handle and knob with respect to cookware)	-	10	-
4.5(Attachment to cookware)	-	20	-
5.1(General)	-	100	-
5.2(Bending strength)	-	750	-
5.3(Torque strength)	-	750	-
5.4(Impact strength)	-	750	-
5.5(Fatigue resistance)	-	750	-
5.6(Leakage)	-	750	-
5.7(Thermal insulation)	-	750	-
5.8(Heat resistance)	-	900	-
5.9(Washing resistance)	-	600	-
5.10(Burning resistance)	-	600	-
4.1(Construction)	-	-	-
4.2(Materials)	-	-	-
4.3(Selection and Size)	-	-	-
4.4(Position of handle and knob with respect to cookware)	-	-	-
4.5(Attachment to cookware)	-	-	-
5.1(General)	-	-	-
5.2(Bending strength)	-	-	-
5.3(Torque strength)	-	-	-
5.4(Impact strength)	-	-	-
5.5(Fatigue resistance)	-	-	-
5.6(Leakage)	-	-	-
5.7(Thermal insulation)	-	-	-
5.8(Heat resistance)	-	-	-
5.9(Washing resistance)	-	-	-
5.10(Burning resistance)	-	-	-

-
-

222

IS 9730 (2008)

Non - Stick unreinforced plastics coatings on domestic cooking utensils - Specification (First Revision)

5800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Material)	-	300	-
4.2(Visual Defects)	-	500	-
4.3 & 7.2(Thickness)	-	500	-
4.4 & 7.3(Non-stick Quality)	-	1200	-
4.5 & 7.4(Salt Water Corrosion Resistance)	-	1800	-
4.6, 7.5.2 & 7.5.3(Adhesion Test)	-	1200	-
5(Marking)	-	200	-
6(Instructions for use)	-	100	-

-
-

223

IS 733 (1983)

Specification for wrought aluminium and aluminium alloy bars, rods and sections (For General Engineering Purposes) (Third Revision)

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4(Freedom from Defects)	-	100	-
Cl. 5.1, Table 2(0.2 Percent proof stress- IS 1816)	-	200	-
Cl. 5.1, Table 2(Tensile Strength- IS 1816)	-	200	-
Cl. 5.1, Table 2(Elongation on 50 mm or 5.65√So Gauge Length)	-	100	-
Cl. 0.4, 5.1, Table 1(Aluminium- IS 504 or by any other suitable instrumental method)	-	200	-
Cl. 0.4, 5.1, Table 1(Copper- IS 504 or by any other suitable instrumental method)	-	300	-
Cl. 0.4, 5.1, Table 1(Magnesium- IS 504 or by any other suitable instrumental method)	-	400	-
Cl. 0.4, 5.1, Table 1(Silicon- IS 504 or by any other suitable instrumental method)	-	400	-
Cl. 0.4, 5.1, Table 1(Iron- IS 504 or by any other suitable instrumental method)	-	300	-
Cl. 0.4, 5.1, Table 1(Zinc- IS 504 or by any other suitable instrumental method)	-	300	-
Cl. 0.4, 5.1, Table 1(Aluminium- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Titanium and / or other grain refining elements - IS 504 or by any other suitable instrumental method)	-	400	-
Cl. 0.4, 5.1, Table 1(Chromium- IS 504 or by any other suitable instrumental method)	-	300	-
Cl. 0.4, 5.1, Table 1(Ti+ V- IS 504 or by any other suitable instrumental method)	-	500	-
Cl. 0.4, 5.1, Table 1(Total Impurities- IS 504 or by any other suitable instrumental method)	-	100	-
Cl. 0.4, 5.1, Table 1(Cr+ Mn- IS 504 or by any other suitable instrumental method)	-	500	-
7(Dimension - IS 3965)	-	100	-
11(Marking)	-	100	-
Cl. 4(Freedom from Defects)	-	0	-
Cl. 5.1, Table 2(0.2 Percent proof stress- IS 1816)	-	0	-
Cl. 5.1, Table 2(Tensile Strength- IS 1816)	-	0	-
Cl. 5.1, Table 2(Elongation on 50 mm or 5.65√So Gauge Length)	-	0	-
Cl. 0.4, 5.1, Table 1(Aluminium- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Copper- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Magnesium- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Silicon- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Iron- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Zinc- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Aluminium- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Titanium and / or other grain refining elements - IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Chromium- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Ti+ V- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Total Impurities- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Cr+ Mn- IS 504 or by any other suitable instrumental method)	-	0	-
7(Dimension - IS 3965)	-	0	-
11(Marking)	-	0	-
Cl. 4(Freedom from Defects)	-	0	-
Cl. 5.1, Table 2(0.2 Percent proof stress- IS 1816)	-	0	-
Cl. 5.1, Table 2(Tensile Strength- IS 1816)	-	0	-
Cl. 5.1, Table 2(Elongation on 50 mm or 5.65√So Gauge Length)	-	0	-
Cl. 0.4, 5.1, Table 1(Aluminium- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Copper- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Magnesium- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Silicon- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Iron- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Zinc- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Aluminium- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Titanium and / or other grain refining elements - IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Chromium- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Ti+ V- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Total Impurities- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Cr+ Mn- IS 504 or by any other suitable instrumental method)	-	0	-
7(Dimension - IS 3965)	-	0	-
11(Marking)	-	0	-

-
-

Bureau of Indian Standards

The National Standards Body of India

Bharat Test House Pvt. Ltd. 1668 Sonipat

1668 (DIV-II), HSIIDC INDUSTRIAL ESTATE, RAI, DIST. SONEPAT, HARYANA, INDIA, Sonipat, Sonipat, Haryana, 131029

9310314585 bthdiv2@bharattesthouse.com

Scope List