BIS - LIMS (Laboratory Information Management System)

Bharat Test House Pvt. Ltd. 1668 Sonipat

1668 (DIV-II), HSIIDC INDUSTRIAL ESTATE, RAI, DIST. SONEPAT, HARYANA, INDIA, Sonipat, Sonipat, Haryana, 131029

9310314585 bthdiv2@bharattesthouse.com

Scope List

Reset

215 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

181

IS 1660 (2009)

Wrought aluminium utensils - Specification (First Revision)

5750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Classification Heavy/Medium/L:ight)	-	100	5% discount for BIS
4(Material)	-	3000	5% discount for BIS
0.5(Fabrication)	-	200	5% discount for BIS
5.1(The utensil shall be pressed or spun from one piece)	-	200	5% discount for BIS
5.2( Body Thickness of the thinnest part of the finished utensil, mm Not declared )	-	200	5% discount for BIS
5.2(Lid Thickness of the finished utensil, mm)	-	200	5% discount for BIS
6.1 & Table 1( i) Name of Utensil )	-	150	5% discount for BIS
6.1 & Table 1(ii) Shape of Utensil)	-	150	5% discount for BIS
6.1 & Table 1( Nominal Size, mm)	-	150	5% discount for BIS
6.1 & Table 1(Inside dia, Φ D mm Not declared )	-	150	5% discount for BIS
6.1 & Table 1(Outside dia Ф NA)	-	150	5% discount for BIS
6.1 & Table 1(Height NA)	-	150	5% discount for BIS
6.1 & Table 1(Capacity, l NA)	-	150	5% discount for BIS
6.1( Minimum sheet thickness for nominal size )	-	150	5% discount for BIS
7.1(HANDLES ,When fitted shall be of aluminium, stainless steel or of other suitable fire resistance material These shall be fastened to the utensils by tightly drawn aluminium or stainless steel rivets, by welding, by screwing to cast bosses or by riveting between flange at the end of the handles. Handles shall be so shaped and positioned to facilitate the carrying and handling of the utensils in normal use )	-	150	5% discount for BIS
7.2(Handles shall be sufficiently strong to support a mass in the utensils equivalent to three times the mass of the water capacity of the utensils in the position of normal use without visible permanent deformation of the handle or utensil)	-	150	5% discount for BIS
8.1(The utensils shall be clean reasonably free from distortion, dents, wrinkles, wavy surface, burrs, scratches, pitting and deep tool marks and other surface defects)	-	200	5% discount for BIS
8.2(The design of the utensils shall be such that it is easy to clean and prevent accumulation of dirt)	-	200	5% discount for BIS
8.4.1.2( Finish of the coating: The coating shall be smooth continuous and uniform in appearance, and shall be adherent. It shall be free from powdery areas, loose films and discontinuities, such as breaks and scratches. The size and number of contact marks shall be minimum consistent with good practice.)	-	200	5% discount for BIS
8.4.2(A coating of thickness 25 to 100 microns is generally required)	-	200	5% discount for BIS
8.4.3(Abrasion Resistance When the coating surface is rubbed two or three times with emery paper with emery conforming to grit number 180 using medium finger pressure, it shall not abrade the surface but shall skid over the surface showing not more than a trace of whitening of the surface)	-	200	5% discount for BIS
8.4.4(The colour of the hard anodic coating varies depending upon the alloy, thickness of the coating and electrolye. Normally the colour may vary from dark grey (almost black) to light grey. )	-	50	5% discount for BIS
8.4.4(The film will appear dark grey when wet. )	-	50	5% discount for BIS
8.4.5 (When the coated surface is rubbed two or three times with fine emery paper grit number 180 using medium finger pressure, cloth or paper shall not abrade the surface. A faint trace of whitening on the cloth or paper is permissible)	-	200	5% discount for BIS
9(The manufacturer shall provide full instructions for use and cleaning for coated or hard anodized utensils)	-	200	5% discount for BIS
10(Each vessel shall be legibly and indelibly stamped on the outside surface or handle with the manufacturer’s name or registered trade-mark, size and thickness or class. )	-	100	5% discount for BIS
( Clauses 4, 4.1, 4.2 and 4.3)(Nitrogen of IS 6911)	-	100	5% discount for BIS
( Clauses 4, 4.1, 4.2 and 4.3)(Titanium of IS 6911)	-	100	5% discount for BIS
( Clauses 4, 4.1, 4.2 and 4.3)(Vanadium of IS 6911)	-	100	5% discount for BIS
( Clauses 4, 4.1, 4.2 and 4.3)(Boron of IS 6911)	-	100	5% discount for BIS
( Clauses 4, 4.1, 4.2 and 4.3)(Copper of IS 6911)	-	100	5% discount for BIS
( Clauses 4, 4.1, 4.2 and 4.3)(Molybdenum of IS 6911)	-	100	5% discount for BIS
( Clauses 4, 4.1, 4.2 and 4.3)(Nickel of IS 6911)	-	100	5% discount for BIS
( Clauses 4, 4.1, 4.2 and 4.3)(Chromium of IS 6911)	-	100	5% discount for BIS
( Clauses 4, 4.1, 4.2 and 4.3)(Aluminium of IS 6911)	-	50	5% discount for BIS
( Clauses 4, 4.1, 4.2 and 4.3)(Silicon of IS 6911)	-	100	5% discount for BIS
( Clauses 4, 4.1, 4.2 and 4.3)(Manganese of IS 6911)	-	100	5% discount for BIS
( Clauses 4, 4.1, 4.2 and 4.3)(Phosphorous of IS 6911)	-	100	5% discount for BIS
( Clauses 4, 4.1, 4.2 and 4.3)(Sulphor of IS 6911)	-	100	5% discount for BIS
( Clauses 4, 4.1, 4.2 and 4.3)(Carbon of IS 6911)	-	100	5% discount for BIS
( Clauses 4, 4.1, 4.2 and 4.3)(Titanium of IS 737)	-	100	5% discount for BIS
( Clauses 4, 4.1, 4.2 and 4.3)(Chromium of IS 737)	-	100	5% discount for BIS
( Clauses 4, 4.1, 4.2 and 4.3)(Zinc of IS 737)	-	100	5% discount for BIS
( Clauses 4, 4.1, 4.2 and 4.3)(Manganese of IS 737)	-	100	5% discount for BIS
( Clauses 4, 4.1, 4.2 and 4.3)(Iron of IS 737)	-	100	5% discount for BIS
( Clauses 4, 4.1, 4.2 and 4.3)(Silicon of IS 737)	-	100	5% discount for BIS
( Clauses 4, 4.1, 4.2 and 4.3)(Magnesium of IS 737)	-	100	5% discount for BIS
( Clauses 4, 4.1, 4.2 and 4.3)(Copper of IS 737)	-	100	5% discount for BIS
( Clauses 4, 4.1, 4.2 and 4.3)(Aluminium of IS 737)	-	100	5% discount for BIS
( Clauses 4, 4.1, 4.2 and 4.3)(Titanium / other Grain of IS 21)	-	100	5% discount for BIS
( Clauses 4, 4.1, 4.2 and 4.3)(Chromium of IS 21)	-	100	5% discount for BIS
( Clauses 4, 4.1, 4.2 and 4.3)(Zinc of IS 21)	-	100	5% discount for BIS
( Clauses 4, 4.1, 4.2 and 4.3)(Manganese of IS 21)	-	100	5% discount for BIS
( Clauses 4, 4.1, 4.2 and 4.3)(Iron of IS 21)	-	100	5% discount for BIS
( Clauses 4, 4.1, 4.2 and 4.3)(Silicon of IS 21)	-	100	5% discount for BIS
( Clauses 4, 4.1, 4.2 and 4.3)(Magnesium of IS 21)	-	100	5% discount for BIS
( Clauses 4, 4.1, 4.2 and 4.3)(Copper of IS 21)	-	100	5% discount for BIS
( Clauses 4, 4.1, 4.2 and 4.3)(Aluminium of IS 21)	-	100	5% discount for BIS
Clause 3.1.3, Table 2(Minimum Thickness at the bottom)	-	100	5% discount for BIS
Clause 3.1.3, Table 2(Minimum Thickness of wall at top edge)	-	100	5% discount for BIS
Clause 3.1.3, Table 2(Minimum Cover Thickness)	-	100	5% discount for BIS
Clause 8.6.1(Performance test)	-	200	5% discount for BIS
Clause 8.6.2(Ground Nut Oil Test for Leakage)	-	200	5% discount for BIS
5.4(Qualitative and Anodized Coating)	-	200	5% discount for BIS
5.5(Qualitative and Anodized Coating)	-	200	5% discount for BIS
8.3(Anodized Coating)	-	200	5% discount for BIS
8.5(Plastic Coating)	-	200	5% discount for BIS
8.1(Qualitative)	-	100	5% discount for BIS
Clause 3.1.3, Table 2(Minimum Thickness at the bottom)	-	100	5% discount for BIS
Clause 3.1.3, Table 2(Minimum Thickness of wall at top edge)	-	100	5% discount for BIS
Clause 3.1.3, Table 2(Minimum Cover Thickness)	-	100	5% discount for BIS
Clause 8.6.1(Performance test)	-	200	5% discount for BIS
Clause 8.6.2(Ground Nut Oil Test for Leakage)	-	200	5% discount for BIS

26 Jul, 2027

-
-

182

IS 617 (1994)

Cast aluminium and its alloys - Ingots and castings for general engineering purposes - Specification (Third Revision)

4750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9(TOLERANCES ON DIMENSIONS OF CASTINGS)	-	100	5% discount for BIS
7(FREEDOM FROM DEFECTS)	-	200	5% discount for BIS
6.2(Hardness)	-	150	5% discount for BIS
6, Table 2.(MECHANICAL PROPERTIES OF CASTINGS)	-	150	5% discount for BIS
5, Table 1.(Chemical Composition)	-	3650	5% discount for BIS
17(Marking)	-	100	5% discount for BIS
11()	-	300	5% discount for BIS
11(Pressure Test)	-	300	5% discount for BIS
17(Marking)	-	100	5% discount for BIS
11(Pressure Test)	-	300	5% discount for BIS
11(Pressure Test - IS 617)	-	300	5% discount for BIS
13(Marking)	-	100	5% discount for BIS
Table-1, Clause - 5.1(Copper)	-	300	5% discount for BIS
Table-1, Clause - 5.1(Iron)	-	300	5% discount for BIS
Table-1, Clause - 5.1(Magnesium)	-	300	5% discount for BIS
Table-1, Clause - 5.1(Manganese)	-	300	5% discount for BIS
Table-1, Clause - 5.1(Tin)	-	200	5% discount for BIS
Table-1, Clause - 5.1(Silicon)	-	350	5% discount for BIS
Table-1, Clause - 5.1(Nickel)	-	300	5% discount for BIS
Table-1, Clause - 5.1(Zinc)	-	300	5% discount for BIS
Table-1, Clause - 5.1(Other elements (each))	-	50	5% discount for BIS
Table-1, Clause - 5.1(Other elements (Total))	-	50	5% discount for BIS
Table-1, Clause - 5.1(Aluminium)	-	300	5% discount for BIS
Table-1, Clause - 5.1(Titanium)	-	300	5% discount for BIS
Table-1, Clause - 5.1(Lead)	-	300	5% discount for BIS
9(TOLERANCES ON DIMENSIONS OF CASTINGS)	-	-	-
7(FREEDOM FROM DEFECTS)	-	-	-
6.2(Hardness)	-	-	-
6, Table 2.(MECHANICAL PROPERTIES OF CASTINGS)	-	-	-
5, Table 1.(Chemical Composition)	-	-	-
17(Marking)	-	-	-
11()	-	-	-
11(Pressure Test)	-	-	-
17(Marking)	-	-	-
11(Pressure Test)	-	-	-
11(Pressure Test - IS 617)	-	-	-
13(Marking)	-	-	-
Table-1, Clause - 5.1(Copper)	-	-	-
Table-1, Clause - 5.1(Iron)	-	-	-
Table-1, Clause - 5.1(Magnesium)	-	-	-
Table-1, Clause - 5.1(Manganese)	-	-	-
Table-1, Clause - 5.1(Tin)	-	-	-
Table-1, Clause - 5.1(Silicon)	-	-	-
Table-1, Clause - 5.1(Nickel)	-	-	-
Table-1, Clause - 5.1(Zinc)	-	-	-
Table-1, Clause - 5.1(Other elements (each))	-	-	-
Table-1, Clause - 5.1(Other elements (Total))	-	-	-
Table-1, Clause - 5.1(Aluminium)	-	-	-
Table-1, Clause - 5.1(Titanium)	-	-	-
Table-1, Clause - 5.1(Lead)	-	-	-

26 Jul, 2027

-
-

183

IS 303 (1989)

Plywood for General Purposes -

5500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	1000	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	1000	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	1000	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	1000	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	1000	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	1000	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1000	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1000	-
11.2.2(Glue Adhesion - Mycological test - 11.2.2, Part 7 of IS 1734 [for MR Garde only])	-	500	-
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for MR Grade])	-	500	-
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for BWR Grade])	-	500	-
11.3(Moisture Content - Part 1 of IS 1734)	-	500	-
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	500	-
8(Dimensions & Tolerances - Squareness - Annexure C)	-	500	-
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	500	-
8(Dimensions & Tolerances - Width - Cl. 8)	-	500	-
8(Dimensions & Tolerances - Length - Cl. 8)	-	500	-
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	100	-
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	100	-
5.2, Table 1, Table 2(Quality Requirements - Cl. 5.2)	-	100	-
5.1(Type - For BB Type)	-	100	-
5.1(Type - For AB Type)	-	100	-
5.1(Type - For AA Type)	-	100	-
4(Grade - For MR grade)	-	100	-
4(Grade - For BWR grade)	-	100	-
cl. 13.1(marking)	-	100	-
cl. 13.2(marking)	-	100	-

26 Jul, 2027

-
Included w.e.f 12.12.2024

184

IS 710 (2010)

Marine plywood - Specification (Second Revision)

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.1(MARKING)	-	100	-
11.2(MARKING)	-	100	-
7.1(WORKMANSHIP AND FINISH )	-	100	-
7.2(WORKMANSHIP AND FINISH )	-	100	-
7.3(WORKMANSHIP AND FINISH )	-	100	-
7.5(WORKMANSHIP AND FINISH )	-	100	-
6.1(DIMENSIONS)	-	100	-
6.1(DIMENSIONS)	-	100	-
6.2(DIMENSIONS)	-	100	-
6.3(DIMENSIONS)	-	100	-
6.3(DIMENSIONS)	-	100	-
9.1.1(MOISTURE CONTENT)	-	300	-
9.1.2 , 9.1.2.1(Glue Adhesion in Dry State)	-	300	-
9.1.2 , 9.1.2.2(Glue Adhesion in Dry State)	-	300	-
9.1.3 , 9.1.3.1.1(Water resistance test)	-	750	-
9.1.3 , 9.1.3.1.2(Water resistance test)	-	750	-
9.1.5(Mycological test)	-	500	-
9.1.5 , 9.1.3.1.1(Mycological test)	-	500	-
9.1.5 , 9.1.3.1.2(Mycological test)	-	500	-
9.1.4(Tensile strength)	-	200	-
9.1.6 (Table 3)(Static bending strength)	-	200	-
9.1.6 (Table 3)(Static bending strength)	-	200	-
9.1.7 (Table 4)(Wet bending strength)	-	200	-
9.1.7 (Table 4)(Wet bending strength)	-	200	-
9.1.8(Retention of preservative)	-	200	-
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Rupture: Across the Face Grain: Minimum Individual))	-	200	-
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Rupture: Across the Face Grain: Average))	-	200	-
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Rupture: Along the Face Grain: Minimum Individual))	-	200	-
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Rupture: Along the Face Grain: Average))	-	200	-
Cl. 9.1.7 (Table 4)(Cl. 9.1.7 (Table 4) (Modulus of Elasticity: Across the Face Grain: Minimum Individual))	-	200	-
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Elasticity: Across the Face Grain: Average))	-	200	-
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Elasticity: Along the Face Grain: Minimum Individual))	-	200	-
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Elasticity: Along the Face Grain: Average))	-	200	-
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Rupture: Across the Face Grain: Minimum Individual))	-	200	-
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Rupture: Across the Face Grain: Average))	-	200	-
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Rupture: Along the Face Grain: Minimum Individual))	-	200	-
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Rupture: Along the Face Grain: Average))	-	200	-
Cl. 9.1.6 (Table 3)(Cl. 9.1.6 (Table 3) (Modulus of Elasticity: Across the Face Grain: Minimum Individual))	-	200	-
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Elasticity: Across the Face Grain: Average))	-	200	-
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Elasticity: Along the Face Grain: Minimum Individual))	-	200	-
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Elasticity: Along the Face Grain: Average))	-	200	-
Cl. 9.1.4(Cl. 9.1.4 (Tensile Strength: Sum of the Tensile Strength in two directions))	-	200	-
Cl. 9.1.4 (Cl. 9.1.4 (Tensile Strength: Perpendicular to grain))	-	200	-
Cl. 9.1.4(Cl. 9.1.4 (Tensile Strength: Parallel to grain))	-	200	-
Cl.9.1.5,9.1.3.1.1(Cl.9.1.5 (Mycological Test),9.1.3.1.1 (Glue Shear Strength: Individual))	-	200	-
Cl.9.1.5,9.1.3.1.1(Cl.9.1.5 (Mycological Test),9.1.3.1.1 ( Glue Shear Strength: Average))	-	500	-
Cl. 9.1.3, 9.1.3.1.1 (Cl. 9.1.3 (Water Resistance Test) , 9.1.3.1.1 (Glue Shear Strength: Individual))	-	750	-
Cl. 9.1.3, 9.1.3.1.1 (Cl. 9.1.3 (Water Resistance Test ), 9.1.3.1.1 (Glue Shear Strength: Average))	-	750	-
Cl. 9.1.2, 9.1.2.1 (Cl. 9.1.2 (Glue Adhesion in Dry State), 9.1.2.1 ( Glue Shear Strength: Individual))	-	300	-
Cl. 9.1.2, 9.1.2.1 (Cl. 9.1.2 (Glue Adhesion in Dry State), 9.1.2.1 ( Glue Shear Strength: Average ))	-	300	-
cl.5.1(manufacture - Veneers)	-	100	-
cl.5.1(manufacture - Veneers - moisture content)	-	100	-
cl.5.1.1(manufacture - Veneers - Defects in Veneers)	-	100	-
cl.5.2.2(Assembly - Thickness of Veneers)	-	100	-

26 Jul, 2027

-
-

185

IS 11329 (2018)

Finned type heat exchanger for room air conditioner (First Revision)

225000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(CLASSIFICATION AND NOMENCLATURE)	-	500	-
5(MATERIALS)	-	105500	-
6(QUALITY REQUIREMENTS)	-	53500	-
7(TESTING)	-	0	-
7.1("Permissible Assembly Contamination Specification")	-	2000	-
7.1.1(Internal Contamination)	-	2000	-
7.2(Pressure Test for Assembly Tightness)	-	0	-
7.2.1(Water Leak Test)	-	10000	-
7.2.2(Helium Leak Test)	-	0	-
7.2.3(Vacuum Leak Test Process)	-	0	-
7.3(Test for Mechanical Strength)	-	2000	-
7.3.1(Burst Test)	-	10000	-
7.3.2(Fatigue Strength Test)	-	3000	-
7.4(Test for Corrosion Resistance)	-	17000	-
8(MARKING)	-	500	-
9()	-	0	-
7.1.2(Moisture content)	-	0	-

26 Jul, 2027

-
-

186

IS 12067 (2023)

Palm fatty acids - Specification (first revision of IS 12067)

Palm Fatty Acids

15190 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1&4.2(Description)	-	990	5% discount for BIS
Cl.4.3 (i)(Moisture - 6 of IS 548 (Part 1/Sec 2))	-	800	5% discount for BIS
Cl. 4.3 (ii)(Saponification Value - 16 of IS 548 (Part 1/Sec 2))	-	1200	5% discount for BIS
Cl. 4.3 (iii)(Acid Value - 8 of IS 548 (Part 1/Sec 2))	-	1000	5% discount for BIS
Cl. 4.3 (iv)(Iodine Value - 15 of IS 548 (Part 1/Sec 2))	-	1400	5% discount for BIS
Cl. 4.3 (v)(Mineral Acidity - ANNEX A2 of IS 12067:2023)	-	1200	5% discount for BIS
Cl. 4.3 (vi)(Ash - ANNEX A1 of IS 12067:2023)	-	800	5% discount for BIS
Cl. 4.3 (vii)(Unsaponifiable matter - 9 of IS 548 (Part 1/ Sec 2))	-	1500	5% discount for BIS
Cl. 4.3 (viii)(Titre Test - 13 of IS 548 (Part 1/Sec 2))	-	1500	5% discount for BIS
Cl. 4.3 (ix)(Colour - 14.1 of IS 548 (Part 1/Sec 2))	-	2000	5% discount for BIS
Cl. 4.3 (x)(Flash point - IS 1448 (Part 21))	-	800	5% discount for BIS
Cl. 4.4(Fatty Acid Composition of Palm Fatty Acids)	-	2000	5% discount for BIS
4.1&4.2(Description)	-	0	-
Cl.4.3 (i)(Moisture - 6 of IS 548 (Part 1/Sec 2))	-	0	-
Cl. 4.3 (ii)(Saponification Value - 16 of IS 548 (Part 1/Sec 2))	-	0	-
Cl. 4.3 (iii)(Acid Value - 8 of IS 548 (Part 1/Sec 2))	-	0	-
Cl. 4.3 (iv)(Iodine Value - 15 of IS 548 (Part 1/Sec 2))	-	0	-
Cl. 4.3 (v)(Mineral Acidity - ANNEX A2 of IS 12067:2023)	-	0	-
Cl. 4.3 (vi)(Ash - ANNEX A1 of IS 12067:2023)	-	0	-
Cl. 4.3 (vii)(Unsaponifiable matter - 9 of IS 548 (Part 1/ Sec 2))	-	0	-
Cl. 4.3 (viii)(Titre Test - 13 of IS 548 (Part 1/Sec 2))	-	0	-
Cl. 4.3 (ix)(Colour - 14.1 of IS 548 (Part 1/Sec 2))	-	0	-
Cl. 4.3 (x)(Flash point - IS 1448 (Part 21))	-	0	-
Cl. 4.4(Fatty Acid Composition of Palm Fatty Acids)	-	0	-
4.1(Description - IS 12067:2023)	-	0	-
4.2(Description - IS 12067:2023)	-	0	-
4.3, Table 1 (i)(Moisture - IS 548 (Part 1/Sec 2) : 2021)	-	0	-
4.3, Table 1 (ii)(Saponification - IS 548 (Part 1/Sec 2) : 2021)	-	0	-
4.3, Table 1 (iii)(Acid value shall not differ from saponification value - IS 548 (Part 1/Sec 2) : 2021)	-	0	-
4.3, Table 1 (iv)(Iodine Value - IS 548 (Part 1/Sec 2) : 2021)	-	0	-
4.3, Table 1 (v)(Mineral Acidity - IS 12067:1987)	-	0	-
4.3, Table 1 (vi)(Ash - IS 12067:1987)	-	0	-
4.3, Table 1 (vii)(Unsaponifiable matter - IS 548 (Part 1/Sec 2) : 2021)	-	0	-
4.3, Table 1 (viii)(Titre - IS 548 (Part 1/Sec 2) : 2021)	-	0	-
4.3, Table 1 (ix)(Colour, 1-inch cell, Y +5R)	-	0	-
4.3, Table 1 (x)(Flash Point - IS 1448 (P-21))	-	0	-
4.4, Table 2 (i)(C6 : 0)	-	0	-
4.4, Table 2 (ii)(C8 : 0)	-	0	-
4.4, Table 2 (iii)(C10 : 0)	-	0	-
4.4, Table 2 (iv)(C12 : 0)	-	0	-
4.4, Table 2 (v)(C14 : 0)	-	0	-
4.4, Table 2 (vi)(C16 : 0)	-	0	-
4.4, Table 2 (vii)(C16 :1)	-	0	-
4.4, Table 2 (viii)(C17 : 0)	-	0	-
4.4, Table 2 (ix)(C17 : 1)	-	0	-
4.4, Table 2 (x)(C18 : 0)	-	0	-
4.4, Table 2 (xi)(C18 : 1)	-	0	-
4.4, Table 2 (xii)(C18 : 2)	-	0	-
4.4, Table 2 (xiii)(C18 : 3)	-	0	-
4.4, Table 2 (xiv)(C20 : 0)	-	0	-
4.4, Table 2 (xv)(C20 : 1)	-	0	-
4.4, Table 2 (xvi)(C20 : 2)	-	0	-
4.4, Table 2 (xvii)(C22 : 0)	-	0	-
4.4, Table 2 (xviii)(C22 : 1)	-	0	-
4.4, Table 2 (xix)(C22 : 2)	-	0	-
4.4, Table 2 (xx)(C24 : 0)	-	0	-
4.4, Table 2 (xxi)(C24 : 1)	-	0	-
4.1&4.2(Description)	-	0	-
Cl.4.3 (i)(Moisture - 6 of IS 548 (Part 1/Sec 2))	-	0	-
Cl. 4.3 (ii)(Saponification Value - 16 of IS 548 (Part 1/Sec 2))	-	0	-
Cl. 4.3 (iii)(Acid Value - 8 of IS 548 (Part 1/Sec 2))	-	0	-
Cl. 4.3 (iv)(Iodine Value - 15 of IS 548 (Part 1/Sec 2))	-	0	-
Cl. 4.3 (v)(Mineral Acidity - ANNEX A2 of IS 12067:2023)	-	0	-
Cl. 4.3 (vi)(Ash - ANNEX A1 of IS 12067:2023)	-	0	-
Cl. 4.3 (vii)(Unsaponifiable matter - 9 of IS 548 (Part 1/ Sec 2))	-	0	-
Cl. 4.3 (viii)(Titre Test - 13 of IS 548 (Part 1/Sec 2))	-	0	-
Cl. 4.3 (ix)(Colour - 14.1 of IS 548 (Part 1/Sec 2))	-	0	-
Cl. 4.3 (x)(Flash point - IS 1448 (Part 21))	-	0	-
Cl. 4.4(Fatty Acid Composition of Palm Fatty Acids)	-	0	-
4.1(Description - IS 12067:2023)	-	0	-
4.2(Description - IS 12067:2023)	-	0	-
4.3, Table 1 (i)(Moisture - IS 548 (Part 1/Sec 2) : 2021)	-	0	-
4.3, Table 1 (ii)(Saponification - IS 548 (Part 1/Sec 2) : 2021)	-	0	-
4.3, Table 1 (iii)(Acid value shall not differ from saponification value - IS 548 (Part 1/Sec 2) : 2021)	-	0	-
4.3, Table 1 (iv)(Iodine Value - IS 548 (Part 1/Sec 2) : 2021)	-	0	-
4.3, Table 1 (v)(Mineral Acidity - IS 12067:1987)	-	0	-
4.3, Table 1 (vi)(Ash - IS 12067:1987)	-	0	-
4.3, Table 1 (vii)(Unsaponifiable matter - IS 548 (Part 1/Sec 2) : 2021)	-	0	-
4.3, Table 1 (viii)(Titre - IS 548 (Part 1/Sec 2) : 2021)	-	0	-
4.3, Table 1 (ix)(Colour, 1-inch cell, Y +5R)	-	0	-
4.3, Table 1 (x)(Flash Point - IS 1448 (P-21))	-	0	-
4.4, Table 2 (i)(C6 : 0)	-	0	-
4.4, Table 2 (ii)(C8 : 0)	-	0	-
4.4, Table 2 (iii)(C10 : 0)	-	0	-
4.4, Table 2 (iv)(C12 : 0)	-	0	-
4.4, Table 2 (v)(C14 : 0)	-	0	-
4.4, Table 2 (vi)(C16 : 0)	-	0	-
4.4, Table 2 (vii)(C16 :1)	-	0	-
4.4, Table 2 (viii)(C17 : 0)	-	0	-
4.4, Table 2 (ix)(C17 : 1)	-	0	-
4.4, Table 2 (x)(C18 : 0)	-	0	-
4.4, Table 2 (xi)(C18 : 1)	-	0	-
4.4, Table 2 (xii)(C18 : 2)	-	0	-
4.4, Table 2 (xiii)(C18 : 3)	-	0	-
4.4, Table 2 (xiv)(C20 : 0)	-	0	-
4.4, Table 2 (xv)(C20 : 1)	-	0	-
4.4, Table 2 (xvi)(C20 : 2)	-	0	-
4.4, Table 2 (xvii)(C22 : 0)	-	0	-
4.4, Table 2 (xviii)(C22 : 1)	-	0	-
4.4, Table 2 (xix)(C22 : 2)	-	0	-
4.4, Table 2 (xx)(C24 : 0)	-	0	-
4.4, Table 2 (xxi)(C24 : 1)	-	0	-
4.1&4.2(Description)	-	0	-
Cl.4.3 (i)(Moisture - 6 of IS 548 (Part 1/Sec 2))	-	0	-
Cl. 4.3 (ii)(Saponification Value - 16 of IS 548 (Part 1/Sec 2))	-	0	-
Cl. 4.3 (iii)(Acid Value - 8 of IS 548 (Part 1/Sec 2))	-	0	-
Cl. 4.3 (iv)(Iodine Value - 15 of IS 548 (Part 1/Sec 2))	-	0	-
Cl. 4.3 (v)(Mineral Acidity - ANNEX A2 of IS 12067:2023)	-	0	-
Cl. 4.3 (vi)(Ash - ANNEX A1 of IS 12067:2023)	-	0	-
Cl. 4.3 (vii)(Unsaponifiable matter - 9 of IS 548 (Part 1/ Sec 2))	-	0	-
Cl. 4.3 (viii)(Titre Test - 13 of IS 548 (Part 1/Sec 2))	-	0	-
Cl. 4.3 (ix)(Colour - 14.1 of IS 548 (Part 1/Sec 2))	-	0	-
Cl. 4.3 (x)(Flash point - IS 1448 (Part 21))	-	0	-
Cl. 4.4(Fatty Acid Composition of Palm Fatty Acids)	-	0	-
4.1(Description - IS 12067:2023)	-	0	-
4.2(Description - IS 12067:2023)	-	0	-
4.3, Table 1 (i)(Moisture - IS 548 (Part 1/Sec 2) : 2021)	-	0	-
4.3, Table 1 (ii)(Saponification - IS 548 (Part 1/Sec 2) : 2021)	-	0	-
4.3, Table 1 (iii)(Acid value shall not differ from saponification value - IS 548 (Part 1/Sec 2) : 2021)	-	0	-
4.3, Table 1 (iv)(Iodine Value - IS 548 (Part 1/Sec 2) : 2021)	-	0	-
4.3, Table 1 (v)(Mineral Acidity - IS 12067:1987)	-	0	-
4.3, Table 1 (vi)(Ash - IS 12067:1987)	-	0	-
4.3, Table 1 (vii)(Unsaponifiable matter - IS 548 (Part 1/Sec 2) : 2021)	-	0	-
4.3, Table 1 (viii)(Titre - IS 548 (Part 1/Sec 2) : 2021)	-	0	-
4.3, Table 1 (ix)(Colour, 1-inch cell, Y +5R)	-	0	-
4.3, Table 1 (x)(Flash Point - IS 1448 (P-21))	-	0	-
4.4, Table 2 (i)(C6 : 0)	-	0	-
4.4, Table 2 (ii)(C8 : 0)	-	0	-
4.4, Table 2 (iii)(C10 : 0)	-	0	-
4.4, Table 2 (iv)(C12 : 0)	-	0	-
4.4, Table 2 (v)(C14 : 0)	-	0	-
4.4, Table 2 (vi)(C16 : 0)	-	0	-
4.4, Table 2 (vii)(C16 :1)	-	0	-
4.4, Table 2 (viii)(C17 : 0)	-	0	-
4.4, Table 2 (ix)(C17 : 1)	-	0	-
4.4, Table 2 (x)(C18 : 0)	-	0	-
4.4, Table 2 (xi)(C18 : 1)	-	0	-
4.4, Table 2 (xii)(C18 : 2)	-	0	-
4.4, Table 2 (xiii)(C18 : 3)	-	0	-
4.4, Table 2 (xiv)(C20 : 0)	-	0	-
4.4, Table 2 (xv)(C20 : 1)	-	0	-
4.4, Table 2 (xvi)(C20 : 2)	-	0	-
4.4, Table 2 (xvii)(C22 : 0)	-	0	-
4.4, Table 2 (xviii)(C22 : 1)	-	0	-
4.4, Table 2 (xix)(C22 : 2)	-	0	-
4.4, Table 2 (xx)(C24 : 0)	-	0	-
4.4, Table 2 (xxi)(C24 : 1)	-	0	-
4.1&4.2(Description)	-	0	-
Cl.4.3 (i)(Moisture - 6 of IS 548 (Part 1/Sec 2))	-	0	-
Cl. 4.3 (ii)(Saponification Value - 16 of IS 548 (Part 1/Sec 2))	-	0	-
Cl. 4.3 (iii)(Acid Value - 8 of IS 548 (Part 1/Sec 2))	-	0	-
Cl. 4.3 (iv)(Iodine Value - 15 of IS 548 (Part 1/Sec 2))	-	0	-
Cl. 4.3 (v)(Mineral Acidity - ANNEX A2 of IS 12067:2023)	-	0	-
Cl. 4.3 (vi)(Ash - ANNEX A1 of IS 12067:2023)	-	0	-
Cl. 4.3 (vii)(Unsaponifiable matter - 9 of IS 548 (Part 1/ Sec 2))	-	0	-
Cl. 4.3 (viii)(Titre Test - 13 of IS 548 (Part 1/Sec 2))	-	0	-
Cl. 4.3 (ix)(Colour - 14.1 of IS 548 (Part 1/Sec 2))	-	0	-
Cl. 4.3 (x)(Flash point - IS 1448 (Part 21))	-	0	-
Cl. 4.4(Fatty Acid Composition of Palm Fatty Acids)	-	0	-
4.1(Description - IS 12067:2023)	-	0	-
4.2(Description - IS 12067:2023)	-	0	-
4.3, Table 1 (i)(Moisture - IS 548 (Part 1/Sec 2) : 2021)	-	0	-
4.3, Table 1 (ii)(Saponification - IS 548 (Part 1/Sec 2) : 2021)	-	0	-
4.3, Table 1 (iii)(Acid value shall not differ from saponification value - IS 548 (Part 1/Sec 2) : 2021)	-	0	-
4.3, Table 1 (iv)(Iodine Value - IS 548 (Part 1/Sec 2) : 2021)	-	0	-
4.3, Table 1 (v)(Mineral Acidity - IS 12067:1987)	-	0	-
4.3, Table 1 (vi)(Ash - IS 12067:1987)	-	0	-
4.3, Table 1 (vii)(Unsaponifiable matter - IS 548 (Part 1/Sec 2) : 2021)	-	0	-
4.3, Table 1 (viii)(Titre - IS 548 (Part 1/Sec 2) : 2021)	-	0	-
4.3, Table 1 (ix)(Colour, 1-inch cell, Y +5R)	-	0	-
4.3, Table 1 (x)(Flash Point - IS 1448 (P-21))	-	0	-
4.4, Table 2 (i)(C6 : 0)	-	0	-
4.4, Table 2 (ii)(C8 : 0)	-	0	-
4.4, Table 2 (iii)(C10 : 0)	-	0	-
4.4, Table 2 (iv)(C12 : 0)	-	0	-
4.4, Table 2 (v)(C14 : 0)	-	0	-
4.4, Table 2 (vi)(C16 : 0)	-	0	-
4.4, Table 2 (vii)(C16 :1)	-	0	-
4.4, Table 2 (viii)(C17 : 0)	-	0	-
4.4, Table 2 (ix)(C17 : 1)	-	0	-
4.4, Table 2 (x)(C18 : 0)	-	0	-
4.4, Table 2 (xi)(C18 : 1)	-	0	-
4.4, Table 2 (xii)(C18 : 2)	-	0	-
4.4, Table 2 (xiii)(C18 : 3)	-	0	-
4.4, Table 2 (xiv)(C20 : 0)	-	0	-
4.4, Table 2 (xv)(C20 : 1)	-	0	-
4.4, Table 2 (xvi)(C20 : 2)	-	0	-
4.4, Table 2 (xvii)(C22 : 0)	-	0	-
4.4, Table 2 (xviii)(C22 : 1)	-	0	-
4.4, Table 2 (xix)(C22 : 2)	-	0	-
4.4, Table 2 (xx)(C24 : 0)	-	0	-
4.4, Table 2 (xxi)(C24 : 1)	-	0	-
4.1&4.2(Description)	-	-	-
Cl.4.3 (i)(Moisture - 6 of IS 548 (Part 1/Sec 2))	-	-	-
Cl. 4.3 (ii)(Saponification Value - 16 of IS 548 (Part 1/Sec 2))	-	-	-
Cl. 4.3 (iii)(Acid Value - 8 of IS 548 (Part 1/Sec 2))	-	-	-
Cl. 4.3 (iv)(Iodine Value - 15 of IS 548 (Part 1/Sec 2))	-	-	-
Cl. 4.3 (v)(Mineral Acidity - ANNEX A2 of IS 12067:2023)	-	-	-
Cl. 4.3 (vi)(Ash - ANNEX A1 of IS 12067:2023)	-	-	-
Cl. 4.3 (vii)(Unsaponifiable matter - 9 of IS 548 (Part 1/ Sec 2))	-	-	-
Cl. 4.3 (viii)(Titre Test - 13 of IS 548 (Part 1/Sec 2))	-	-	-
Cl. 4.3 (ix)(Colour - 14.1 of IS 548 (Part 1/Sec 2))	-	-	-
Cl. 4.3 (x)(Flash point - IS 1448 (Part 21))	-	-	-
Cl. 4.4(Fatty Acid Composition of Palm Fatty Acids)	-	-	-
4.1(Description - IS 12067:2023)	-	-	-
4.2(Description - IS 12067:2023)	-	-	-
4.3, Table 1 (i)(Moisture - IS 548 (Part 1/Sec 2) : 2021)	-	-	-
4.3, Table 1 (ii)(Saponification - IS 548 (Part 1/Sec 2) : 2021)	-	-	-
4.3, Table 1 (iii)(Acid value shall not differ from saponification value - IS 548 (Part 1/Sec 2) : 2021)	-	-	-
4.3, Table 1 (iv)(Iodine Value - IS 548 (Part 1/Sec 2) : 2021)	-	-	-
4.3, Table 1 (v)(Mineral Acidity - IS 12067:1987)	-	-	-
4.3, Table 1 (vi)(Ash - IS 12067:1987)	-	-	-
4.3, Table 1 (vii)(Unsaponifiable matter - IS 548 (Part 1/Sec 2) : 2021)	-	-	-
4.3, Table 1 (viii)(Titre - IS 548 (Part 1/Sec 2) : 2021)	-	-	-
4.3, Table 1 (ix)(Colour, 1-inch cell, Y +5R)	-	-	-
4.3, Table 1 (x)(Flash Point - IS 1448 (P-21))	-	-	-
4.4, Table 2 (i)(C6 : 0)	-	-	-
4.4, Table 2 (ii)(C8 : 0)	-	-	-
4.4, Table 2 (iii)(C10 : 0)	-	-	-
4.4, Table 2 (iv)(C12 : 0)	-	-	-
4.4, Table 2 (v)(C14 : 0)	-	-	-
4.4, Table 2 (vi)(C16 : 0)	-	-	-
4.4, Table 2 (vii)(C16 :1)	-	-	-
4.4, Table 2 (viii)(C17 : 0)	-	-	-
4.4, Table 2 (ix)(C17 : 1)	-	-	-
4.4, Table 2 (x)(C18 : 0)	-	-	-
4.4, Table 2 (xi)(C18 : 1)	-	-	-
4.4, Table 2 (xii)(C18 : 2)	-	-	-
4.4, Table 2 (xiii)(C18 : 3)	-	-	-
4.4, Table 2 (xiv)(C20 : 0)	-	-	-
4.4, Table 2 (xv)(C20 : 1)	-	-	-
4.4, Table 2 (xvi)(C20 : 2)	-	-	-
4.4, Table 2 (xvii)(C22 : 0)	-	-	-
4.4, Table 2 (xviii)(C22 : 1)	-	-	-
4.4, Table 2 (xix)(C22 : 2)	-	-	-
4.4, Table 2 (xx)(C24 : 0)	-	-	-
4.4, Table 2 (xxi)(C24 : 1)	-	-	-

26 Jul, 2027

-
-

187

IS 12069 (2023)

Coconut Fatty Acids - Specification (first revision of IS 12069)

Coconut Fatty Acids

15190 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Description)	-	190	5% discount for BIS
4.2(Description)	-	800	5% discount for BIS
4.3 Table 1 (i)(Moisture)	-	800	5% discount for BIS
4.3 Table 1 (ii)(Saponification value)	-	1200	5% discount for BIS
4.3 Table 1 (iii)(Acid value differ from Saponification value)	-	1000	5% discount for BIS
4.3 Table 1 (iv)(Iodine value)	-	1400	5% discount for BIS
4.3 Table 1 (v)(Mineral acidity)	-	800	5% discount for BIS
4.3 Table 1 (vi)(Ash,)	-	1500	5% discount for BIS
4.3 Table 1 (vii)(Unsaponifiable matter)	-	1500	5% discount for BIS
4.3 Table 1 (viii)(Titre,)	-	2000	5% discount for BIS
4.3 Table 1 (ix)(Flash point)	-	800	5% discount for BIS
4.4 Table 2 (i)(C6 : 0)	-	2000	5% discount for BIS
4.4 Table 2 (ii)(C8 : 0)	-	0	5% discount for BIS
4.4 Table 2 (iii)(C10 : 0)	-	0	5% discount for BIS
4.4 Table 2 (iv)(C12 : 0)	-	0	5% discount for BIS
4.4Table 2 (v)(C14 : 0)	-	0	5% discount for BIS
4.4Table 2 (vi)(C16 : 0)	-	0	5% discount for BIS
4.4Table 2 (vii)(C16 :1)	-	0	5% discount for BIS
4.4Table 2 (viii)(C17 : 0)	-	0	5% discount for BIS
4.4Table 2 (ix)(C17 : 1)	-	0	5% discount for BIS
4.4Table 2 (x)(C18 : 0)	-	0	5% discount for BIS
4.4Table 2 (xi)(C18 : 1)	-	0	5% discount for BIS
4.4Table 2 (xii)(C18 : 2)	-	0	5% discount for BIS
4.4Table 2 (xiii)(C18 : 3)	-	0	5% discount for BIS
4.4Table 2 (xiv)(C20 : 0)	-	0	5% discount for BIS
4.4Table 2 (xv)(C20 : 1)	-	0	5% discount for BIS
4.4Table 2 (xvi)(C20 : 2)	-	0	5% discount for BIS
4.4Table 2 (xvii)(C22 : 0)	-	0	5% discount for BIS
4.4Table 2 (xviii)(C22 : 1)	-	0	5% discount for BIS
4.4Table 2 (xix)(C22 : 2)	-	0	5% discount for BIS
4.4Table 2 (xx)(C24 : 0)	-	0	5% discount for BIS
4.4Table 2 (xxi)(C24 : 1)	-	0	5% discount for BIS
4.1(Description)	-	0	5% discount for BIS
4.2(Description)	-	0	-
4.3 Table 1 (i)(Moisture)	-	0	5% discount for BIS
4.3 Table 1 (ii)(Saponification value)	-	0	5% discount for BIS
4.3 Table 1 (iii)(Acid value differ from Saponification value)	-	0	5% discount for BIS
4.3 Table 1 (iv)(Iodine value)	-	0	5% discount for BIS
4.3 Table 1 (v)(Mineral acidity)	-	0	5% discount for BIS
4.3 Table 1 (vi)(Ash,)	-	0	5% discount for BIS
4.3 Table 1 (vii)(Unsaponifiable matter)	-	0	5% discount for BIS
4.3 Table 1 (viii)(Titre,)	-	0	5% discount for BIS
4.3 Table 1 (ix)(Flash point)	-	0	5% discount for BIS
4.4 Table 2 (i)(C6 : 0)	-	0	5% discount for BIS
4.4 Table 2 (ii)(C8 : 0)	-	0	5% discount for BIS
4.4 Table 2 (iii)(C10 : 0)	-	0	5% discount for BIS
4.4 Table 2 (iv)(C12 : 0)	-	0	5% discount for BIS
4.4Table 2 (v)(C14 : 0)	-	0	5% discount for BIS
4.4Table 2 (vi)(C16 : 0)	-	0	5% discount for BIS
4.4Table 2 (vii)(C16 :1)	-	0	5% discount for BIS
4.4Table 2 (viii)(C17 : 0)	-	0	5% discount for BIS
4.4Table 2 (ix)(C17 : 1)	-	0	5% discount for BIS
4.4Table 2 (x)(C18 : 0)	-	0	5% discount for BIS
4.4Table 2 (xi)(C18 : 1)	-	0	5% discount for BIS
4.4Table 2 (xii)(C18 : 2)	-	0	5% discount for BIS
4.4Table 2 (xiii)(C18 : 3)	-	0	5% discount for BIS
4.4Table 2 (xiv)(C20 : 0)	-	0	5% discount for BIS
4.4Table 2 (xv)(C20 : 1)	-	0	5% discount for BIS
4.4Table 2 (xvi)(C20 : 2)	-	0	5% discount for BIS
4.4Table 2 (xvii)(C22 : 0)	-	0	5% discount for BIS
4.4Table 2 (xviii)(C22 : 1)	-	0	5% discount for BIS
4.4Table 2 (xix)(C22 : 2)	-	0	5% discount for BIS
4.4Table 2 (xx)(C24 : 0)	-	0	5% discount for BIS
4.4Table 2 (xxi)(C24 : 1)	-	0	5% discount for BIS
4.1(Description)	-	0	-
4.2(Description)	-	0	-
4.3 Table 1 (i)(Moisture)	-	0	-
4.3 Table 1 (ii)(Saponification value)	-	0	-
4.3 Table 1 (iii)(Acid value differ from Saponification value)	-	0	-
4.3 Table 1 (iv)(Iodine value)	-	0	-
4.3 Table 1 (v)(Mineral acidity)	-	0	-
4.3 Table 1 (vi)(Ash,)	-	0	-
4.3 Table 1 (vii)(Unsaponifiable matter)	-	0	-
4.3 Table 1 (viii)(Titre,)	-	0	-
4.3 Table 1 (ix)(Flash point)	-	0	-
4.4 Table 2 (i)(C6 : 0)	-	0	-
4.4 Table 2 (ii)(C8 : 0)	-	0	-
4.4 Table 2 (iii)(C10 : 0)	-	0	-
4.4 Table 2 (iv)(C12 : 0)	-	0	-
4.4Table 2 (v)(C14 : 0)	-	0	-
4.4Table 2 (vi)(C16 : 0)	-	0	-
4.4Table 2 (vii)(C16 :1)	-	0	-
4.4Table 2 (viii)(C17 : 0)	-	0	-
4.4Table 2 (ix)(C17 : 1)	-	0	-
4.4Table 2 (x)(C18 : 0)	-	0	-
4.4Table 2 (xi)(C18 : 1)	-	0	-
4.4Table 2 (xii)(C18 : 2)	-	0	-
4.4Table 2 (xiii)(C18 : 3)	-	0	-
4.4Table 2 (xiv)(C20 : 0)	-	0	-
4.4Table 2 (xv)(C20 : 1)	-	0	-
4.4Table 2 (xvi)(C20 : 2)	-	0	-
4.4Table 2 (xvii)(C22 : 0)	-	0	-
4.4Table 2 (xviii)(C22 : 1)	-	0	-
4.4Table 2 (xix)(C22 : 2)	-	0	-
4.4Table 2 (xx)(C24 : 0)	-	0	-
4.4Table 2 (xxi)(C24 : 1)	-	0	-
4.1(Description)	-	0	-
4.2(Description)	-	0	-
4.3 Table 1 (i)(Moisture)	-	0	-
4.3 Table 1 (ii)(Saponification value)	-	0	-
4.3 Table 1 (iii)(Acid value differ from Saponification value)	-	0	-
4.3 Table 1 (iv)(Iodine value)	-	0	-
4.3 Table 1 (v)(Mineral acidity)	-	0	-
4.3 Table 1 (vi)(Ash,)	-	0	-
4.3 Table 1 (vii)(Unsaponifiable matter)	-	0	-
4.3 Table 1 (viii)(Titre,)	-	0	-
4.3 Table 1 (ix)(Flash point)	-	0	-
4.4 Table 2 (i)(C6 : 0)	-	0	-
4.4 Table 2 (ii)(C8 : 0)	-	0	-
4.4 Table 2 (iii)(C10 : 0)	-	0	-
4.4 Table 2 (iv)(C12 : 0)	-	0	-
4.4Table 2 (v)(C14 : 0)	-	0	-
4.4Table 2 (vi)(C16 : 0)	-	0	-
4.4Table 2 (vii)(C16 :1)	-	0	-
4.4Table 2 (viii)(C17 : 0)	-	0	-
4.4Table 2 (ix)(C17 : 1)	-	0	-
4.4Table 2 (x)(C18 : 0)	-	0	-
4.4Table 2 (xi)(C18 : 1)	-	0	-
4.4Table 2 (xii)(C18 : 2)	-	0	-
4.4Table 2 (xiii)(C18 : 3)	-	0	-
4.4Table 2 (xiv)(C20 : 0)	-	0	-
4.4Table 2 (xv)(C20 : 1)	-	0	-
4.4Table 2 (xvi)(C20 : 2)	-	0	-
4.4Table 2 (xvii)(C22 : 0)	-	0	-
4.4Table 2 (xviii)(C22 : 1)	-	0	-
4.4Table 2 (xix)(C22 : 2)	-	0	-
4.4Table 2 (xx)(C24 : 0)	-	0	-
4.4Table 2 (xxi)(C24 : 1)	-	0	-
4.1(Description)	-	0	-
4.2(Description)	-	0	-
4.3 Table 1 (i)(Moisture)	-	0	-
4.3 Table 1 (ii)(Saponification value)	-	0	-
4.3 Table 1 (iii)(Acid value differ from Saponification value)	-	0	-
4.3 Table 1 (iv)(Iodine value)	-	0	-
4.3 Table 1 (v)(Mineral acidity)	-	0	-
4.3 Table 1 (vi)(Ash,)	-	0	-
4.3 Table 1 (vii)(Unsaponifiable matter)	-	0	-
4.3 Table 1 (viii)(Titre,)	-	0	-
4.3 Table 1 (ix)(Flash point)	-	0	-
4.4 Table 2 (i)(C6 : 0)	-	0	-
4.4 Table 2 (ii)(C8 : 0)	-	0	-
4.4 Table 2 (iii)(C10 : 0)	-	0	-
4.4 Table 2 (iv)(C12 : 0)	-	0	-
4.4Table 2 (v)(C14 : 0)	-	0	-
4.4Table 2 (vi)(C16 : 0)	-	0	-
4.4Table 2 (vii)(C16 :1)	-	0	-
4.4Table 2 (viii)(C17 : 0)	-	0	-
4.4Table 2 (ix)(C17 : 1)	-	0	-
4.4Table 2 (x)(C18 : 0)	-	0	-
4.4Table 2 (xi)(C18 : 1)	-	0	-
4.4Table 2 (xii)(C18 : 2)	-	0	-
4.4Table 2 (xiii)(C18 : 3)	-	0	-
4.4Table 2 (xiv)(C20 : 0)	-	0	-
4.4Table 2 (xv)(C20 : 1)	-	0	-
4.4Table 2 (xvi)(C20 : 2)	-	0	-
4.4Table 2 (xvii)(C22 : 0)	-	0	-
4.4Table 2 (xviii)(C22 : 1)	-	0	-
4.4Table 2 (xix)(C22 : 2)	-	0	-
4.4Table 2 (xx)(C24 : 0)	-	0	-
4.4Table 2 (xxi)(C24 : 1)	-	0	-
4.1(Description)	-	-	-
4.2(Description)	-	-	-
4.3 Table 1 (i)(Moisture)	-	-	-
4.3 Table 1 (ii)(Saponification value)	-	-	-
4.3 Table 1 (iii)(Acid value differ from Saponification value)	-	-	-
4.3 Table 1 (iv)(Iodine value)	-	-	-
4.3 Table 1 (v)(Mineral acidity)	-	-	-
4.3 Table 1 (vi)(Ash,)	-	-	-
4.3 Table 1 (vii)(Unsaponifiable matter)	-	-	-
4.3 Table 1 (viii)(Titre,)	-	-	-
4.3 Table 1 (ix)(Flash point)	-	-	-
4.4 Table 2 (i)(C6 : 0)	-	-	-
4.4 Table 2 (ii)(C8 : 0)	-	-	-
4.4 Table 2 (iii)(C10 : 0)	-	-	-
4.4 Table 2 (iv)(C12 : 0)	-	-	-
4.4Table 2 (v)(C14 : 0)	-	-	-
4.4Table 2 (vi)(C16 : 0)	-	-	-
4.4Table 2 (vii)(C16 :1)	-	-	-
4.4Table 2 (viii)(C17 : 0)	-	-	-
4.4Table 2 (ix)(C17 : 1)	-	-	-
4.4Table 2 (x)(C18 : 0)	-	-	-
4.4Table 2 (xi)(C18 : 1)	-	-	-
4.4Table 2 (xii)(C18 : 2)	-	-	-
4.4Table 2 (xiii)(C18 : 3)	-	-	-
4.4Table 2 (xiv)(C20 : 0)	-	-	-
4.4Table 2 (xv)(C20 : 1)	-	-	-
4.4Table 2 (xvi)(C20 : 2)	-	-	-
4.4Table 2 (xvii)(C22 : 0)	-	-	-
4.4Table 2 (xviii)(C22 : 1)	-	-	-
4.4Table 2 (xix)(C22 : 2)	-	-	-
4.4Table 2 (xx)(C24 : 0)	-	-	-
4.4Table 2 (xxi)(C24 : 1)	-	-	-
4.3 Table 1 (ix)(Colour,)	-	-	-

26 Jul, 2027

-
-

188

IS 12068 (1987)

Specification for rice bran fatty acids

Rice Bran Fatty Acids

13190 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1/3.1.1/3.2(Description - IS 12068:1987)	-	990	5% discount for BIS
3.3, 6.1 Table 1 (i)(Moisture - IS 548 (Part 1/Sec 2) : 2021)	-	800	5% discount for BIS
3.3, 6.1 Table 1 (ii)(Saponification - IS 548 (Part 1/Sec 2) : 2021)	-	1200	5% discount for BIS
3.3, 6.1 Table 1 (iii)(Acid value - IS 548 (Part 1/Sec 2) : 2021)	-	1000	5% discount for BIS
3.3, 6.1 Table 1 (iv)(Iodine Value - IS 548 (Part 1/Sec 2) : 2021)	-	1400	5% discount for BIS
3.3, 6.1 Table 1 (v)(Mineral Acidity - IS 12068:1987)	-	1200	5% discount for BIS
3.3, 6.1 Table 1 (vi)(Ash - IS 12068:1987)	-	800	5% discount for BIS
3.3, 6.1 Table 1 (vii)(Unsaponifiable matter - IS 548 (Part 1/Sec 2) : 2021)	-	1500	5% discount for BIS
3.3, 6.1 Table 1 (viii)(Titre - IS 548 (Part 1/Sec 2) : 2021)	-	1500	5% discount for BIS
3.3, 6.1 Table 1 (ix)(Colour)	-	2000	5% discount for BIS
3.3, 6.1 Table 1 (x)(Flash Point - IS 1448 (P-21))	-	800	5% discount for BIS
3.1/3.1.1/3.2(Description - IS 12068:1987)	-	0	5% discount for BIS
3.3, 6.1 Table 1 (i)(Moisture - IS 548 (Part 1/Sec 2) : 2021)	-	0	5% discount for BIS
3.3, 6.1 Table 1 (ii)(Saponification - IS 548 (Part 1/Sec 2) : 2021)	-	0	5% discount for BIS
3.3, 6.1 Table 1 (iii)(Acid value - IS 548 (Part 1/Sec 2) : 2021)	-	0	5% discount for BIS
3.3, 6.1 Table 1 (iv)(Iodine Value - IS 548 (Part 1/Sec 2) : 2021)	-	0	5% discount for BIS
3.3, 6.1 Table 1 (v)(Mineral Acidity - IS 12068:1987)	-	0	5% discount for BIS
3.3, 6.1 Table 1 (vi)(Ash - IS 12068:1987)	-	0	5% discount for BIS
3.3, 6.1 Table 1 (vii)(Unsaponifiable matter - IS 548 (Part 1/Sec 2) : 2021)	-	0	5% discount for BIS
3.3, 6.1 Table 1 (viii)(Titre - IS 548 (Part 1/Sec 2) : 2021)	-	0	5% discount for BIS
3.3, 6.1 Table 1 (ix)(Colour)	-	0	5% discount for BIS
3.3, 6.1 Table 1 (x)(Flash Point - IS 1448 (P-21))	-	0	5% discount for BIS
3.1/3.1.1/3.2(Description - IS 12068:1987)	-	0	-
3.3, 6.1 Table 1 (i)(Moisture - IS 548 (Part 1/Sec 2) : 2021)	-	0	-
3.3, 6.1 Table 1 (ii)(Saponification - IS 548 (Part 1/Sec 2) : 2021)	-	0	-
3.3, 6.1 Table 1 (iii)(Acid value - IS 548 (Part 1/Sec 2) : 2021)	-	0	-
3.3, 6.1 Table 1 (iv)(Iodine Value - IS 548 (Part 1/Sec 2) : 2021)	-	0	-
3.3, 6.1 Table 1 (v)(Mineral Acidity - IS 12068:1987)	-	0	-
3.3, 6.1 Table 1 (vi)(Ash - IS 12068:1987)	-	0	-
3.3, 6.1 Table 1 (vii)(Unsaponifiable matter - IS 548 (Part 1/Sec 2) : 2021)	-	0	-
3.3, 6.1 Table 1 (viii)(Titre - IS 548 (Part 1/Sec 2) : 2021)	-	0	-
3.3, 6.1 Table 1 (ix)(Colour)	-	0	-
3.3, 6.1 Table 1 (x)(Flash Point - IS 1448 (P-21))	-	0	-
3.1/3.1.1/3.2(Description - IS 12068:1987)	-	0	-
3.3, 6.1 Table 1 (i)(Moisture - IS 548 (Part 1/Sec 2) : 2021)	-	0	-
3.3, 6.1 Table 1 (ii)(Saponification - IS 548 (Part 1/Sec 2) : 2021)	-	0	-
3.3, 6.1 Table 1 (iii)(Acid value - IS 548 (Part 1/Sec 2) : 2021)	-	0	-
3.3, 6.1 Table 1 (iv)(Iodine Value - IS 548 (Part 1/Sec 2) : 2021)	-	0	-
3.3, 6.1 Table 1 (v)(Mineral Acidity - IS 12068:1987)	-	0	-
3.3, 6.1 Table 1 (vi)(Ash - IS 12068:1987)	-	0	-
3.3, 6.1 Table 1 (vii)(Unsaponifiable matter - IS 548 (Part 1/Sec 2) : 2021)	-	0	-
3.3, 6.1 Table 1 (viii)(Titre - IS 548 (Part 1/Sec 2) : 2021)	-	0	-
3.3, 6.1 Table 1 (ix)(Colour)	-	0	-
3.3, 6.1 Table 1 (x)(Flash Point - IS 1448 (P-21))	-	0	-
3.1/3.1.1/3.2(Description - IS 12068:1987)	-	0	-
3.3, 6.1 Table 1 (i)(Moisture - IS 548 (Part 1/Sec 2) : 2021)	-	0	-
3.3, 6.1 Table 1 (ii)(Saponification - IS 548 (Part 1/Sec 2) : 2021)	-	0	-
3.3, 6.1 Table 1 (iii)(Acid value - IS 548 (Part 1/Sec 2) : 2021)	-	0	-
3.3, 6.1 Table 1 (iv)(Iodine Value - IS 548 (Part 1/Sec 2) : 2021)	-	0	-
3.3, 6.1 Table 1 (v)(Mineral Acidity - IS 12068:1987)	-	0	-
3.3, 6.1 Table 1 (vi)(Ash - IS 12068:1987)	-	0	-
3.3, 6.1 Table 1 (vii)(Unsaponifiable matter - IS 548 (Part 1/Sec 2) : 2021)	-	0	-
3.3, 6.1 Table 1 (viii)(Titre - IS 548 (Part 1/Sec 2) : 2021)	-	0	-
3.3, 6.1 Table 1 (ix)(Colour)	-	0	-
3.3, 6.1 Table 1 (x)(Flash Point - IS 1448 (P-21))	-	0	-

26 Jul, 2027

-
-

189

IS 17569 (2021)

Insulated Containers for Food Storage — Specification

33250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Manufacture and Workmanship)	-	500	-
5.3(Manufacture and Workmanship)	-	500	-
7.1(Material)	-	500	-
7.1.2(Thickness)	-	500	-
7.1.2.1(Requirements and Tests(Material) – Outer Protective Case and Accessories – Lead)	-	2000	-
7.1.2.1(Requirements and Tests(Material) – Outer Protective Case and Accessories – Cadmium)	-	2000	-
7.1.2.8(Bisphenol A(BPA))	-	1000	-
7.3(Capacity)	-	250	-
7.4(Heat Retention Capability)	-	750	-
7.5(Cold Retention Capability)	-	750	-
7.6.1(Drop Impact Test)	-	250	-
7.6.2(Pendulum Impact Test)	-	250	-
7.7(Fixing Strength of the Handle)	-	500	-
7.8(Test for Strength of Shoulder Strap)	-	500	-
7.9(Leakage Test)	-	500	-
7.10(Joint Leak Test)	-	500	-
7.11(Staining Test)	-	500	-
7.12("Check for PUF (Polyurethane Foam) or any Other Similar Thermal Insulation Material ")	-	500	-
7.13.1(Length of the Shoulder Strap)	-	250	-
7.13.2(Stability of Insulated Container)	-	250	-
7.13.3(Cleaning)	-	250	-
7.14(Seepage Test)	-	250	-
9.1(Marking)	-	250	-
9.2(BIS certification marking)	-	250	-
10(Packaging)	-	250	-

26 Jul, 2027

-
-

190

IS 5856 (2022)

Welding consumables Wire electrodes strip electrodes wires and rods for arc welding of stainless and heat resisting steels Classification (Third Revision)

22500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0 Table 1(Carbon)	-	1250	-
6.0 Table 1(Sulphur)	-	1250	-
6.0 Table 1(Phosphorus)	-	1250	-
6.0 Table 1(Manganese)	-	1250	-
6.0 Table 1(Silicon)	-	1250	-
6.0 Table 1(Nitrogen)	-	1250	-
6.0 Table 1(Copper)	-	1250	-
6.0 Table 1(Titanium)	-	1250	-
6.0 Table 1(Aluminium)	-	1250	-
6.0 Table 1(Niobium)	-	1250	-
6.0 Table 1(Nickel)	-	1250	-
6.0 Table 1(Chromium)	-	1250	-
6.0 Table 1(Molybdenum)	-	1250	-
6.0 Table 1(Tungsten)	-	1250	-
6.0 Table 1(Vanadium)	-	1250	-
5.0 Annex A(proof strength)	-	1000	-
5.0 Annex A(Tensile strength)	-	1250	-
5.0 Annex A(Elongation)	-	1500	-

26 Jul, 2027

-
-

191

IS 17790 (2022)

INSULATED FLASK FOR DOMESTIC USE SPECIFICATION

30500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Manufacture and Workmanship)	-	0	-
5.3(Welding Defects)	-	0	-
7.1(Material)	-	0	-
7.1.2.1 & 7.1.2.2(Thickness)	-	250	-
7.1.3(Coating Thickness)	-	1250	-
7.1.3(Material – coating cadmium)	-	1000	-
7.1.2.2(Bisphenol A (BPA))	-	1250	-
7.1.4.3(O-Ring / Washer- Defects)	-	250	-
7.2(Capacity)	-	250	-
7.3(Heat Retention Capability)	-	750	-
7.4(Cold Retention Capability)	-	750	-
7.5.1(Drop Impact Test)	-	250	-
7.5.2(Pendulum Impact Test)	-	250	-
7.6(Fixing Strength of the Handle)	-	500	-
7.7(Test for Strength of Shoulder Strap)	-	500	-
7.8(Test for strength of cord)	-	500	-
7.9(Leakage Test)	-	500	-
7.10(Joint Leak Test)	-	500	-
7.11(Staining Test)	-	500	-
7.13(Seepage test)	-	500	-
7.14(Test for Lever, device for operating Or regulating flow test)	-	500	-
7.15(Test for length of the shoulder cap)	-	250	-
7.16(Stability of Flask)	-	250	-
7.17(Pour Test)	-	500	-
9.1(Marking)	-	100	-
9.2(BIS certification marking)	-	100	-
10(Packaging)	-	100	-

26 Jul, 2027

-
-

192

IS 17526 (2021)

STAINLESS STEEL VACUUM FLASKS - SPECIFICATION

29000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Manufacture and Workmanship)	-	0	-
5.3(Manufacture and Workmanship)	-	0	-
7.1.1(Material- Inner containers)	-	0	-
7.1.2(Outer protective case and accessories - Thickness)	-	250	-
7.1.2.1(Coating - Limit of lead)	-	1250	-
7.1.2.1(Coating - Limit of Cadmium)	-	1000	-
7.1.4(Auxillary closure "Bisphenol A (BPA)")	-	1000	-
7.3(Capacity)	-	250	-
7.4(Heat Retention Capability)	-	750	-
7.5(Cold Retention Capability)	-	750	-
7.6.1(Drop Impact Test)	-	250	-
7.6.2(Pendulum Impact Test)	-	250	-
7.7(Fixing Strength of the Handle)	-	500	-
7.8(Test for Strength of Shoulder Strap)	-	500	-
7.8.1(Test for strength of cord)	-	500	-
7.9(Leakage Test)	-	500	-
7.10(Joint Leak Test)	-	500	-
7.11(Staining Test)	-	500	-
7.12(Length of the Shoulder Strap)	-	250	-
7.13(Stability of Flask/Bottle)	-	250	-
7.14(Pour Test)	-	500	-
9.1(Marking)	-	100	-
9.2(BIS certification marking)	-	100	-
10(Packaging)	-	100	-

26 Jul, 2027

-
-

193

IS 415 (2022)

SHUTTLECOCKS SPECIFICATION

2000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.3(Classification)	-	200	-
Cl.4(Material)	-	200	-
Cl.5.1(Dimension)	-	250	-
Cl.5.2(Weight)	-	250	-
Cl.6.1(For Grade 1 Shuttlecock)	-	250	-
Cl.6.2(For Grade 2 Shuttlecock)	-	250	-
Cl.8.1(Pace and Flight)	-	500	-
Cl.9(Packing and Marking)	-	100	-

26 Jul, 2027

-
-

194

IS/ISO 9994 (2018)

Lighters Safety specifications First Revision

Lighters

18500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4(Flame Generation)	-	500	5% discount for BIS
Cl.4.2(Flame Height)	-	500	5% discount for BIS
Cl.4.3(Flame-Height adjustment)	-	750	5% discount for BIS
Cl.4.4(Resistance to spitting or sputtering and flaring)	-	1250	5% discount for BIS
Cl.4.5(Flame Extinction)	-	1250	5% discount for BIS
Cl.4.6(Volumetric displacement of Fuel)	-	1250	5% discount for BIS
Cl.4.7(Mass of Fuel)	-	500	5% discount for BIS
Cl.5.1(External Finish)	-	250	5% discount for BIS
Cl.5.2(Compatibility of Fuel)	-	1500	5% discount for BIS
Cl.5.3(Resistance to Fuel Loss)	-	1000	5% discount for BIS
Cl.5.4(Resistance to dropping)	-	1750	5% discount for BIS
Cl.5.5(Resistance to elevated Temperature)	-	2000	5% discount for BIS
Cl.5.7(Burning Behavior)	-	1250	5% discount for BIS
Cl.5.9(Resistance to Continue Burning)	-	1500	5% discount for BIS
Cl.5.6(Resistance to internal Pressure)	-	1750	5% discount for BIS
Cl.4(Flame Generation)	-	0	-
Cl.4.2(Flame Height)	-	0	-
Cl.4.3(Flame-Height adjustment)	-	0	-
Cl.4.4(Resistance to spitting or sputtering and flaring)	-	0	-
Cl.4.5(Flame Extinction)	-	0	-
Cl.4.6(Volumetric displacement of Fuel)	-	0	-
Cl.4.7(Mass of Fuel)	-	0	-
Cl.5.1(External Finish)	-	0	-
Cl.5.2(Compatibility of Fuel)	-	0	-
Cl.5.3(Resistance to Fuel Loss)	-	0	-
Cl.5.4(Resistance to dropping)	-	0	-
Cl.5.5(Resistance to elevated Temperature)	-	0	-
Cl.5.7(Burning Behavior)	-	0	-
Cl.5.9(Resistance to Continue Burning)	-	0	-
Cl.5.6(Resistance to internal Pressure)	-	0	-
Cl.5.8(Resistance to cyclic burning)	-	1500	5% discount for BIS

26 Jul, 2027

-
-

195

IS 12425 (2022)

SPECIFICATION FOR STEEPLECHASE HURDLES First Revision

1250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.2(Top Bar)	-	250	-
Cl.2.1(Dimension)	-	500	-
Cl.2.2(Mass)	-	250	-
Cl.3(Packing and Marking)	-	250	-

26 Jul, 2027

-
-

196

IS 4630 (2022)

Indian Standard SPECIFICATION FOR BARBELL SET First Revision

Barbell Set

1250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.2.1(Bars)	-	250	5% Discount to BIS
Cl.2.2(Discs)	-	250	5% Discount to BIS
Cl.2.3(Collar)	-	250	5% Discount to BIS
Cl.2.1(Bars)	-	0	-
Cl.2.2(Discs)	-	0	-
Cl.2.3(Collar)	-	0	-
Cl.2.1(Bars)	-	0	-
Cl.2.2(Discs)	-	0	-
Cl.2.3(Collar)	-	0	-

26 Jul, 2027

-
-

197

IS 5460 (2022)

SOFTBALL SPECIFICATION

3250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4.1(Materials)	-	500	-
Cl.4.1.2(Cover)	-	500	-
Cl.4.1.3(Inks)	-	1500	-
Cl.4.2(Shape, Dimensions And Weight)	-	250	-
Cl.5(Construction and Workmanship)	-	250	-
Cl.6(Packing and Marking)	-	250	-
Cl.4.1(Materials)	-	0	-
Cl.4.1.2(Cover)	-	0	-
Cl.4.1.3(Inks)	-	0	-
Cl.4.2(Shape, Dimensions And Weight)	-	0	-
Cl.5(Construction and Workmanship)	-	0	-
Cl.6(Packing and Marking)	-	0	-

26 Jul, 2027

-
-

198

IS 4386 (2022)

SPECIFICATION FOR PUTTING SHOTS Second Revision

1800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.2(Types)	-	100	-
Cl.3.1(Material)	-	100	-
Cl.3.2(Weight and Diameter)	-	700	-
Cl.5(Test for Center of Gravity)	-	500	-
Cl.6(Packing and Marking)	-	200	-
Cl.4(Manufacture, Workmanship and Finish)	-	200	-
Cl.2(Types)	-	0	-
Cl.3.1(Material)	-	0	-
Cl.3.2(Weight and Diameter)	-	0	-
Cl.5(Test for Center of Gravity)	-	0	-
Cl.6(Packing and Marking)	-	0	-
Cl.4(Manufacture, Workmanship and Finish)	-	0	-

26 Jul, 2027

-
-

199

IS 2463 (2022)

RING USED IN GYMNASTICS - SPECIFICATION

RING USED IN GYMNASTICS

2700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4(Construction and Workmanship)	-	100	5% Discount to BIS
Cl.5.1.1(Swing Rope)	-	750	5% Discount to BIS
Cl.5.1.2(Tension Rope)	-	750	5% Discount to BIS
Cl.5.1.3(Frame)	-	200	5% Discount to BIS
Cl.5.1.4(Strap)	-	100	5% Discount to BIS
Cl.5.1.5(Ring)	-	100	5% Discount to BIS
Cl.5.2(Shape and Dimension)	-	200	5% Discount to BIS
CL.6(Performance Requirement)	-	300	5% Discount to BIS
Cl.7(Packing and Marking)	-	200	5% Discount to BIS
Cl.4(Construction and Workmanship)	-	0	-
Cl.5.1.1(Swing Rope)	-	0	-
Cl.5.1.2(Tension Rope)	-	0	-
Cl.5.1.3(Frame)	-	0	-
Cl.5.1.4(Strap)	-	0	-
Cl.5.1.5(Ring)	-	0	-
Cl.5.2(Shape and Dimension)	-	0	-
CL.6(Performance Requirement)	-	0	-
Cl.7(Packing and Marking)	-	0	-
Cl.4(Construction and Workmanship)	-	0	-
Cl.5.1.1(Swing Rope)	-	0	-
Cl.5.1.2(Tension Rope)	-	0	-
Cl.5.1.3(Frame)	-	0	-
Cl.5.1.4(Strap)	-	0	-
Cl.5.1.5(Ring)	-	0	-
Cl.5.2(Shape and Dimension)	-	0	-
CL.6(Performance Requirement)	-	0	-
Cl.7(Packing and Marking)	-	0	-

26 Jul, 2027

-
-

200

IS 2494 : Part 1 (1994)

V - Belts - Endless V - Belts for industrial purposes: Part 1 general purpose - Specification (Second Revision)

4250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.0(Marking)	-	250	-
10.1(Elongation)	-	875	-
10.1(Tensile Strength)	-	875	-
7.2.2(Matched Belts - Code)	-	250	-
7.1(Belt Pitch Length)	-	500	-
6.0(Designation)	-	250	-
5 Table 2B(Cross sectional dimension)	-	100	-
5 Table 2A(Cross sectional dimension)	-	100	-
5 Table 1(Cross sectional dimension)	-	100	-
4.1(Material and Workmanship)	-	250	-
7.2(Test Matched Belts)	-	250	-
Clause 5 Table 1(Nominal Pitch Width (Wp))	-	100	-
Clause 5 Table 1(Nominal Height (T))	-	100	-
Clause 5 Table 1(Nominal Pitch Width (W))	-	100	-
Clause 5 Table 1(Nominal Included Angle (A))	-	150	-

26 Jul, 2027

-
-

201

IS 1068 (1993)

Electroplated coatings of nickel plus chromium and copper plus nickel plus chromium - Specification (Third Revision)

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 7.2.4.1(Thickness of Chromium coating)	-	800	-
Clause 7.2.3.1(Thickness of Nickel coating)	-	800	-
7.1(Apperance)	-	100	-
7.2.2(Thicness of Copper Coating - IS 1068)	-	800	-
7.3(Adhesion - IS 1068)	-	800	-
7.4(Corrosion Resistance - IS 1068)	-	1600	-
10(Marking)	-	100	-
Clause 7.2.4.1(Thickness of Chromium coating)	-	0	-
Clause 7.2.3.1(Thickness of Nickel coating)	-	0	-
7.1(Apperance)	-	0	-
7.2.2(Thicness of Copper Coating - IS 1068)	-	0	-
7.3(Adhesion - IS 1068)	-	0	-
7.4(Corrosion Resistance - IS 1068)	-	0	-
10(Marking)	-	0	-
Clause 7.2.4.1(Thickness of Chromium coating)	-	0	-
Clause 7.2.3.1(Thickness of Nickel coating)	-	0	-
7.1(Apperance)	-	0	-
7.2.2(Thicness of Copper Coating - IS 1068)	-	0	-
7.3(Adhesion - IS 1068)	-	0	-
7.4(Corrosion Resistance - IS 1068)	-	0	-
10(Marking)	-	0	-

26 Jul, 2027

-
-

202

IS 2927 (1975)

Specification for fazing alloys (First Revision)

5500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1 - 1(Copper)	-	300	-
3.1 - 1(zinc)	-	300	-
3.1 - 1(Manganese)	-	300	-
3.1 - 1(Magnesium)	-	300	-
3.1 - 1(Aluminium)	-	300	-
3.1 - 1(Silicon)	-	300	-
3.1 - 1(Iron)	-	300	-
3.1 - 1(Other element each)	-	300	-
3.1 - 1(Other element total)	-	300	-
3.1 - 1(Nickel)	-	300	-
3.1 - 1(Melting range (solidus))	-	300	-
3.1 - 1(Melting range (liquidus))	-	300	-
3.1 - 3(Copper)	-	300	-
3.1 - 3(Silver)	-	300	-
3.1 - 3(Phosphorus)	-	300	-
3.1 - 3(Other elements total)	-	300	-
3.1 - 3(Melting range (solidus))	-	250	-
3.1 - 3(Melting range (liquidus))	-	250	-
Cl. 5(Freedom From Defect)	-	100	-

26 Jul, 2027

-
-

203

IS 319 (2007)

Free cutting brass bars, rods and section - Specification (Fifth Revision)

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Freedom from defects)	-	100	-
7.0(Dimension and Tolerances)	-	100	-
8.1 Table 1(Cu)	-	400	-
8.1 Table 1(Pb)	-	400	-
8.1 Table 1(Fe)	-	400	-
8.1 Table 1(Total other impurities excluding iron)	-	400	-
8.1 Table 1(Zn)	-	400	-
9.1 Table-2(Tensile Strength)	-	250	-
9.1 Table-2(Elongation)	-	200	-
9.2(Vickers Hardness)	-	200	-
10.1(Mercurous Nitrate Test)	-	250	-
14(Marking)	-	100	-
14(Marking)	-	0	-

26 Jul, 2027

-
-

204

IS 5522 (2014)

Stainless steel sheets and strips for utensils - Specification (Third Revision)

Stainless Steel Sheets and Strips for Utensils

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl . 6 .0(Freedom from defect)	-	100	-
Cl. 7.1 & 7.2 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl. 7.1 & 7.2 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl. 7.1 & 7.2 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl. 7.1 & 7.2 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl. 7.1 & 7.2 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl. 7.1 & 7.2 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl. 7.1 & 7.2 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl. 7.1 & 7.2 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
8.2, Table 3(Tensile Strength, N/mm2)	-	300	-
8.2, Table 3(Proof Stress, N/mm2)	-	300	-
8.2, Table 3(Elongation, %)	-	200	-
8.3(Hardness , max-IS 1500 or IS 1501 (Part 1) or IS 1586)	-	400	-
8.4(Bend Test)	-	400	-
8.5(Erichsen Cupping Test)	-	400	-
10.1(Thickness, mm)	-	50	-
10.2(width, mm)	-	50	-
10.3(Length, mm)	-	50	-
10.4(Flatness,mm)	-	50	-
10.5(Camber, mm)	-	100	-
11(Surface Finish)	-	100	-
13(Marking)	-	100	-
Cl . 6 .0(Freedom from defect)	-	0	-
Cl. 7.1 & 7.2 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 7.1 & 7.2 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 7.1 & 7.2 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 7.1 & 7.2 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 7.1 & 7.2 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 7.1 & 7.2 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 7.1 & 7.2 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 7.1 & 7.2 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
8.2, Table 3(Tensile Strength, N/mm2)	-	0	-
8.2, Table 3(Proof Stress, N/mm2)	-	0	-
8.2, Table 3(Elongation, %)	-	0	-
8.3(Hardness , max-IS 1500 or IS 1501 (Part 1) or IS 1586)	-	0	-
8.4(Bend Test)	-	0	-
8.5(Erichsen Cupping Test)	-	0	-
10.1(Thickness, mm)	-	0	-
10.2(width, mm)	-	0	-
10.3(Length, mm)	-	0	-
10.4(Flatness,mm)	-	0	-
10.5(Camber, mm)	-	0	-
11(Surface Finish)	-	0	-
13(Marking)	-	0	-

26 Jul, 2027

-
-

205

IS 737 (2008)

Wrought aluminium and aluminium alloy sheet and strip for general engineering purposes - Specification (Fourth Revision)

4800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Freedom from defects)	-	100	-
6 Table-1(Al)	-	400	-
6 Table-1(Cu)	-	300	-
6 Table-1(Mg)	-	400	-
6 Table-1(Si)	-	400	-
6 Table-1(Fe)	-	400	-
6 Table-1(Mn)	-	400	-
6 Table-1(Zn)	-	300	-
6 Table-1(Ti)	-	400	-
6 Table-1(Cr)	-	400	-
6 Table-1(Cu+Si+Fe)	-	0	-
6 Table-1(Cu+Si+Fe+Mn+Zn)	-	0	-
6 Table-1(Cu+Mg+Si+Fe+Mn+Zn)	-	0	-
6 Table-1(Zr)	-	400	-
6 Table-1(Cr+Mn)	-	0	-
7 Table-2(Tensile Strength)	-	200	-
7 Table-2(Elongation)	-	150	-
7 Table-2(0.2 % Proof Stress)	-	150	-
7 Table-2(Bend Test)	-	200	-
9(Dimension - IS 2676)	-	100	-
12(Marking)	-	100	-
9(Dimension - IS 2676)	-	100	-
12(Marking)	-	100	-
9(Dimension - IS 2676)	-	0	-
12(Marking)	-	0	-
9(Dimension - IS 2676)	-	0	-
12(Marking)	-	0	-
9(Dimension - IS 2676)	-	0	-
12(Marking)	-	0	-

26 Jul, 2027

-
-

206

IS 15997 (2012)

Low nickel austenitic stainless steel sheet and strip for utensils and kitchen appliances - Specification

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Freedom From Defects)	-	100	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Copper -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	-
9.3, Table 3 (Tensile Strength, Mpa)	-	300	-
9.3, Table 3 (Yield Strength, Mpa)	-	200	-
9.3, Table 3 (Elongation, %)	-	250	-
9.4(Erichsen Cupping Test,(Average depth of cupping) mm)	-	250	-
11(Surface finish)	-	100	-
12(Dimensions)	-	100	-
6(Freedom From Defects)	-	0	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Copper -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
9.3, Table 3 (Tensile Strength, Mpa)	-	0	-
9.3, Table 3 (Yield Strength, Mpa)	-	0	-
9.3, Table 3 (Elongation, %)	-	0	-
9.4(Erichsen Cupping Test,(Average depth of cupping) mm)	-	0	-
11(Surface finish)	-	0	-
12(Dimensions)	-	0	-
17(Marking)	-	100	-
6(Freedom From Defects)	-	0	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Copper -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
9.3, Table 3 (Tensile Strength, Mpa)	-	0	-
9.3, Table 3 (Yield Strength, Mpa)	-	0	-
9.3, Table 3 (Elongation, %)	-	0	-
9.4(Erichsen Cupping Test,(Average depth of cupping) mm)	-	0	-
11(Surface finish)	-	0	-
12(Dimensions)	-	0	-
17(Marking)	-	0	-

26 Jul, 2027

-
-

207

IS 4454 : Part 4 (2001)

Steel wires for mechanical springs: Part 4 stainless steel wire (Second Revision)

Stainless Steel Wire

8200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 1. Cl.1.1,1.2,7.1 & 7.2(Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	650	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	650	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	650	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Suphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	650	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Phosphorous- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	650	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Chromium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	650	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Molybdenum- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	650	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Nickel- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	650	-
8(Freedom from defects)	-	100	-
9(Dimensions & Tolerances)	-	300	-
10.1.1, Table 4(Tensile strength)	-	500	-
10.1.1, Table 4(Reduction in area)	-	200	-
10.2(Wrapping test)	-	500	-
10.3(Reverse torsion test)	-	300	-
10.4(Cast of the wire)	-	300	-
10.5(Bend test)	-	400	-
10.6(Coiling test)	-	200	-
11(Surface finish)	-	100	-
15.1(Marking)	-	100	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Suphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Phosphorous- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Chromium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Molybdenum- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Nickel- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	-
8(Freedom from defects)	-	0	-
9(Dimensions & Tolerances)	-	0	-
10.1.1, Table 4(Tensile strength)	-	0	-
10.1.1, Table 4(Reduction in area)	-	0	-
10.2(Wrapping test)	-	0	-
10.3(Reverse torsion test)	-	0	-
10.4(Cast of the wire)	-	0	-
10.5(Bend test)	-	0	-
10.6(Coiling test)	-	0	-
11(Surface finish)	-	0	-
15.1(Marking)	-	0	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Suphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Phosphorous- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Chromium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Molybdenum- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	-
Table 1. Cl.1.1,1.2,7.1 & 7.2(Nickel- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	-
8(Freedom from defects)	-	0	-
9(Dimensions & Tolerances)	-	0	-
10.1.1, Table 4(Tensile strength)	-	0	-
10.1.1, Table 4(Reduction in area)	-	0	-
10.2(Wrapping test)	-	0	-
10.3(Reverse torsion test)	-	0	-
10.4(Cast of the wire)	-	0	-
10.5(Bend test)	-	0	-
10.6(Coiling test)	-	0	-
11(Surface finish)	-	0	-
15.1(Marking)	-	0	-

26 Jul, 2027

-
-

208

IS 9873 : Part 7 (2017)

Safety of toys: Part 7 requirements and test methods for finger paints

5100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.5.2 - Table 3(Impurities - Benzo (α) pyrene - Annex C)	-	150	-
4.5.2 - Table 3(Impurities - Polychlorinated biphenyls - Annex C)	-	150	-
4.5.2 - Table 3(IImpurities- Hexachlorobenzene - Annex C)	-	150	-
4.6 - Table 4(Taste and smell - Finger paints shall not be sweetened, flavoured or fragranced - Cl 4.6)	-	150	-
4.6 - Table 4(Taste and smell - Finger paints shall not be sweetened, flavoured or fragranced - Cl 4.6)	-	150	-
4.7(pH value - ISO 787-9)	-	150	-
4.9(N-Nitrosamines - N-nitrosodiethanolamine (NDELA) - n EN 71–12:2013, 7.2.1 and Clause 8)	-	150	-
4.2.2 - Table 1, 2(Finger Paint shall not contain Azo colourants that by cleavage of one or more azo groups can produce the primary aromatic amines - Annex C)	-	4050	-

26 Jul, 2027

-
-

209

IS 277 (2018)

Galvanized steel strips and sheets (Plain And Corrugated) - Specification (Seventh Revision)

2600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(carbon)	-	100	-
5.1(sulphur)	-	100	-
5.1(phosphorus)	-	100	-
5.1(manganese)	-	100	-
5.1(silicon )	-	100	-
5.1(nitrogen)	-	100	-
5.1(copper)	-	100	-
5.1(micro alloy)	-	500	-
5.1(aluminium)	-	100	-
cl 5.1, T-1, designation For GP 550(C)	-	100	-
cl 5.1, T-1, designation For GP 450(C)	-	100	-
cl 5.1, T-1, designation For GP 350 class-2(C)	-	100	-
cl 5.1, T-1, designation For GP 350 class-1(C)	-	100	-
cl 5.1, T-1, designation For GP 300(C)	-	100	-
cl 5.1, T-1, designation For GP275(C)	-	100	-
cl 5.1, T-1, designation For GP250(C)	-	100	-
cl 5.1, T-1, designation For GP230(C)	-	100	-
cl 5.1, T-1, designation For GPIF(C)	-	100	-
cl 5.1, T-1, designation For GPED(C)	-	100	-
cl 5.1, T-1, designation For GPD(C)	-	100	-
cl 5.1, T-1, designation For GPL(C)	-	100	-
cl 5.1, T-1, designation For GC(C)	-	100	-
cl 5.1, T-1, designation For GPH (C)	-	100	-
cl 5.1, T-1, designation For GP (C)	-	100	-
Cl 10(Galvanising Test)	-	100	-
7.4(Mass of Coating: Single Spot Test)	-	200	-
7.4(Mass of Coating: Triple Spot Test)	-	200	-
7.1 & 10.2(Mass of Coating: Single Spot Test)	-	200	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	200	-
cl 5.1, T-1, Note-6, For reinforced steel(P)	-	100	-
cl 5.1, T-1, designation For GP 550(P)	-	100	-
cl 5.1, T-1, designation For GP 350 class-2(P)	-	100	-
cl 5.1, T-1, designation For GP 350 class-1(P)	-	100	-
cl 5.1, T-1, designation For GP 300(P)	-	100	-
cl 5.1, T-1, designation For GP275(P)	-	100	-
cl 5.1, T-1, designation For GP250(P)	-	100	-
cl 5.1, T-1, designation For GP230(P)	-	100	-
cl 5.1, T-1, designation For GPIF(P)	-	100	-
cl 5.1, T-1, designation For GPED(P)	-	100	-
cl 5.1, T-1, designation For GPD(P)	-	100	-
cl 5.1, T-1, designation For GPL(P)	-	100	-
cl 5.1, T-1, designation For GC(P)	-	100	-
cl 5.1, T-1, designation For GPH (P)	-	100	-
cl 5.1, T-1, designation For GP (P)	-	100	-
cl 5.1, T-1, designation For GP 550(S)	-	100	-
cl 5.1, T-1, designation For GP 450(S)	-	100	-
cl 5.1, T-1, designation For GP 350 class-1(S)	-	100	-
cl 5.1, T-1, designation For GP 300(S)	-	100	-
cl 5.1, T-1, designation For GP275(S)	-	100	-
cl 5.1, T-1, designation For GP250(S)	-	100	-
cl 5.1, T-1, designation For GP230(S)	-	100	-
cl 5.1, T-1, designation For GPIF(S)	-	100	-
cl 5.1, T-1, designation For GPED(S)	-	100	-
cl 5.1, T-1, designation For GPD(S)	-	100	-
cl 5.1, T-1, designation For GPL(S)	-	100	-
cl 5.1, T-1, designation For GC(S)	-	100	-
cl 5.1, T-1, designation For GPH (S)	-	100	-
cl 5.1, T-1, designation For GP (S)	-	100	-
cl 5.1, T-1, designation For GP 550(Mn)	-	100	-
cl 5.1, T-1, designation For GP 450(Mn)	-	100	-
cl 5.1, T-1, designation For GP 350 class-2(Mn)	-	100	-
cl 5.1, T-1, designation For GP 350 class-1(Mn)	-	100	-
cl 5.1, T-1, designation For GP 300(Mn)	-	100	-
cl 5.1, T-1, designation For GP275(Mn)	-	100	-
cl 5.1, T-1, designation For GP250(Mn)	-	100	-
cl 5.1, T-1, designation For GPIF(Mn)	-	100	-
cl 5.1, T-1, designation For GP230(Mn)	-	100	-
cl 5.1, T-1, designation For GPED(Mn)	-	100	-
cl 5.1, T-1, designation For GPD(Mn)	-	100	-
cl 5.1, T-1, designation For GPL(Mn)	-	100	-
cl 5.1, T-1, designation For GC(Mn)	-	100	-
cl 5.1, T-1, designation For GPH (Mn)	-	100	-
cl 5.1, T-1, designation For GP (Mn)	-	100	-
Cl 12(Workmanship)	-	100	-
Cl 13(Weight)	-	50	-
Cl 14(Length, Width & Thickness)	-	100	-
Cl 8.2(Press)	-	100	-
5.1(Titanium)	-	100	-
Cl. 17(Marking )	-	50	-
Cl.12(Freedom from defects)	-	50	-
Cl. 8.1 (Cl. 8.1 (Percentage Elongation ))	-	100	-
Cl. 8.1 (Cl. 8.1 (Yield Stress))	-	100	-
Cl. 8.1 (Cl. 8.1 (Tensile Strength))	-	100	-
cl 5.1, T-1, Note-5, For Microalloying elements(B)	-	50	-
cl 5.1, T-1, Note-5, For Microalloying elements(V)	-	100	-
cl 5.1, T-1, Note-5, For Microalloying elements(Nb)	-	100	-
cl 5.1, T-1, Note-5, For Microalloying elements(Nb+V+Ti+B)	-	50	-
Cl 10(Galvanising Test)	-	0	-
Cl 12(Workmanship)	-	0	-
Cl 13(Weight)	-	0	-
Cl 14(Length, Width & Thickness)	-	0	-
Cl 8.2(Press)	-	0	-
Cl 10(Galvanising Test)	-	0	-
Cl 12(Workmanship)	-	0	-
Cl 13(Weight)	-	0	-
Cl 14(Length, Width & Thickness)	-	0	-
Cl 8.2(Press)	-	0	-

26 Jul, 2027

-
-

210

IS 6527 (1995)

Stainless steel wire rods - Specification (First Revision)

Stainless Steel Wire Rod

8600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(The wire rods shall be smooth on surface and free from harmful surface defects)	-	100	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Carbon)	-	500	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Sulphur)	-	500	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Phosphorous)	-	500	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Manganese)	-	500	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Silicon)	-	500	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Nitrogen)	-	500	-
7, Table 1of IS:6527 (Designation X30Cr13)(Copper)	-	500	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Titanium)	-	500	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Niobium)	-	500	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Nickel)	-	500	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Chromium)	-	500	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Molybdenum)	-	500	-
Cl 9(Tensile & Hardness)	-	500	-
Cl. 9 .1 Table 3(0.2 % Proof Stress )	-	500	-
Cl. 9 .1 Table 3(Elongation)	-	400	-
Cl 10(Diameter & Out Of Round)	-	100	-
10 & 10.1, Dia over 20 mm (Out of round)	-	0	-
10 & 10.1, Dia over 20 mm (Size, Tolerance)	-	0	-
10 & 10.1, Dia over 16 mm upto 20 mm (Out of round)	-	0	-
10 & 10.1, Dia over 16 mm upto 20 mm (Size, Tolerance)	-	0	-
10 & 10.1, Dia over 9.5 mm upto 16 mm (Out of round)	-	0	-
10 & 10.1, Dia over 9.5 mm upto 16 mm (Size, Tolerance)	-	0	-
10 & 10.1, Dia- (5.5-9.5 mm)(Out of round)	-	0	-
10 & 10.1, Dia- (5.5-9.5 mm)(Size, Tolerance)	-	0	-
13(Corrosion resistance-IS 10461,Part-1 & 2)	-	300	-
15(Marking)	-	100	-
6(The wire rods shall be smooth on surface and free from harmful surface defects)	-	100	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Carbon)	-	500	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Sulphur)	-	500	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Phosphorous)	-	500	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Manganese)	-	500	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Silicon)	-	500	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Nitrogen)	-	500	-
7, Table 1of IS:6527 (Designation X30Cr13)(Copper)	-	500	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Titanium)	-	500	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Niobium)	-	500	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Nickel)	-	500	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Chromium)	-	500	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Molybdenum)	-	500	-
Cl 9(Tensile & Hardness)	-	500	-
Cl. 9 .1 Table 3(0.2 % Proof Stress )	-	500	-
Cl. 9 .1 Table 3(Elongation)	-	500	-
Cl 10(Diameter & Out Of Round)	-	100	-
10 & 10.1, Dia over 20 mm (Out of round)	-	0	-
10 & 10.1, Dia over 20 mm (Size, Tolerance)	-	0	-
10 & 10.1, Dia over 16 mm upto 20 mm (Out of round)	-	0	-
10 & 10.1, Dia over 16 mm upto 20 mm (Size, Tolerance)	-	0	-
10 & 10.1, Dia over 9.5 mm upto 16 mm (Out of round)	-	0	-
10 & 10.1, Dia over 9.5 mm upto 16 mm (Size, Tolerance)	-	0	-
10 & 10.1, Dia- (5.5-9.5 mm)(Out of round)	-	0	-
10 & 10.1, Dia- (5.5-9.5 mm)(Size, Tolerance)	-	0	-
13(Corrosion resistance-IS 10461,Part-1 & 2)	-	300	-
15(Marking)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr17Ni12Mo2)(Ultimate Tensile Strength)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr17Ni12Mo2)(Ultimate Tensile Strength)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr17Ni12Mo2)(Ultimate Tensile Strength)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X07Cr18Ni9)(Ultimate Tensile Strength)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr18Ni10)(Ultimate Tensile Strength)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr18Ni11)(Ultimate Tensile Strength)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X20Cr13)(Ultimate Tensile Strength)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X12Cr13)(Ultimate Tensile Strength)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr13)(Ultimate Tensile Strength)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr17Ni12Mo2)(0.2% Proof Stress)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr17Ni12Mo2)(0.2% Proof Stress)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr17Ni12Mo2)(0.2% Proof Stress)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X07Cr18Ni9)(0.2% Proof Stress)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr18Ni10)(0.2% Proof Stress)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr18Ni11)(0.2% Proof Stress)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr13)(0.2% Proof Stress)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr17Ni12Mo2)(%Elongation)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr17Ni12Mo2)(%Elongation)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr17Ni12Mo2)(%Elongation)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X07Cr18Ni9)(%Elongation)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr18Ni10)(%Elongation)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr18Ni11)(%Elongation)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X12Cr13)(%Elongation)	-	500	-
13(Corrosion Resistance - IS 10461)	-	300	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Carbon)	-	500	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Carbon)	-	500	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Carbon)	-	500	-
7, Table 1of IS:6527 (Designation X04Cr13)(Carbon)	-	500	-
7, Table 1of IS:6527 (Designation X30Cr13)(Carbon)	-	500	-
7, Table 1of IS:6527 (Designation X20Cr13)(Carbon)	-	500	-
7, Table 1of IS:6527 (Designation X12Cr13)(Carbon)	-	500	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Sulphur)	-	500	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Sulphur)	-	500	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Sulphur)	-	500	-
7, Table 1of IS:6527 (Designation X30Cr13)(Sulphur)	-	500	-
7, Table 1of IS:6527 (Designation X20Cr13)(Sulphur)	-	500	-
7, Table 1of IS:6527 (Designation X04Cr13)(Sulphur)	-	500	-
7, Table 1of IS:6527 (Designation X12Cr13)(Sulphur)	-	500	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Phosphorous)	-	500	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Phosphorous)	-	500	-
7, Table 1of IS:6527 (Designation X30Cr13)(Phosphorous)	-	500	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Phosphorous)	-	500	-
7, Table 1of IS:6527 (Designation X04Cr13)(Phosphorous)	-	500	-
7, Table 1of IS:6527 (Designation X12Cr13)(Phosphorous)	-	500	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Manganese)	-	500	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Manganese)	-	500	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Manganese)	-	500	-
7, Table 1of IS:6527 (Designation X30Cr13)(Manganese)	-	500	-
7, Table 1of IS:6527 (Designation X20Cr13)(Manganese)	-	500	-
7, Table 1of IS:6527 (Designation X12Cr13)(Manganese)	-	500	-
7, Table 1of IS:6527 (Designation X04Cr13)(Manganese)	-	500	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Silicon)	-	500	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Silicon)	-	500	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Silicon)	-	500	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Silicon)	-	500	-
7, Table 1of IS:6527 (Designation X30Cr13)(Silicon)	-	500	-
7, Table 1of IS:6527 (Designation X20Cr13)(Silicon)	-	500	-
7, Table 1of IS:6527 (Designation X12Cr13)(Silicon)	-	500	-
7, Table 1of IS:6527 (Designation X04Cr13)(Silicon)	-	500	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Copper)	-	500	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Copper)	-	500	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Copper)	-	500	-
7, Table 1of IS:6527 (Designation X12Cr13)(Copper)	-	500	-
7, Table 1of IS:6527 (Designation X04Cr13)(Copper)	-	500	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Titanium)	-	500	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Titanium)	-	500	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Titanium)	-	500	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Chromium)	-	500	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Chromium)	-	500	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Chromium)	-	500	-
7, Table 1of IS:6527 (Designation X30Cr13)(Chromium)	-	500	-
7, Table 1of IS:6527 (Designation X12Cr13)(Chromium)	-	500	-
7, Table 1of IS:6527 (Designation X04Cr13)(Chromium)	-	500	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Niobium)	-	500	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Niobium)	-	500	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Niobium)	-	500	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Nickel)	-	500	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Nickel)	-	500	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Nickel)	-	500	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Nickel)	-	500	-
7, Table 1of IS:6527 (Designation X20Cr13)(Nickel)	-	500	-
7, Table 1of IS:6527 (Designation X30Cr13)(Nickel)	-	500	-
7, Table 1of IS:6527 (Designation X04Cr13)(Nickel)	-	500	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Molybdenum)	-	500	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Molybdenum)	-	500	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Molybdenum)	-	500	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Molybdenum)	-	500	-
7, Table 1of IS:6527 (Designation X30Cr13)(Molybdenum)	-	500	-

26 Jul, 2027

-
-

Bureau of Indian Standards

The National Standards Body of India

Bharat Test House Pvt. Ltd. 1668 Sonipat

1668 (DIV-II), HSIIDC INDUSTRIAL ESTATE, RAI, DIST. SONEPAT, HARYANA, INDIA, Sonipat, Sonipat, Haryana, 131029

9310314585 bthdiv2@bharattesthouse.com

Scope List