BIS - LIMS (Laboratory Information Management System)

BIS, Central Laboratory (CL)

20/9, Site 4, Sahibabad Industrial Area, Sahibabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

- sample@bis.gov.in

Scope List

Reset

180 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 742 (1981)

Specification for zinc bash alloy dih castings (Second Revision)

Rs 1350/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 4.1 (Aluminium)	-
Cl 4.1 (Copper)	-
Cl 4.1 (Magnesium)	-
Cl 4.1 (Iron)	-
Cl 4.1 (Lead)	-
Cl 4.1 (Cadmium)	-
Cl 4.1 (Tin)	-
Cl 4.1 (Thalium+ Indium)	-
Cl 4.1 (Nickel)	-
Cl 4.1 (Zinc)	-

-
Sample having dia > 3mm and/or thickness > 0.8 mm shall be provided.

IS 10805 (2022)

Foot-Valves, Reflux Valves or NonReturn Valves and Bore Valves to be Used in Suction Lines of Agricultural Pumping Systems â Specification ( Second Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (Coatings)	-
3 (Dimensions)	-
7.1.1 (Seat Test)	-
7.1.2 (Housing Test)	-

-
Sample of 5 cutpc having dia > 3mm and thickness > 0.8 mm shall be provided. Grade/designation of material of component as per Cl. 4 of IS 10805 has to be declraed.

IS 2590 (1987)

Specification for primary aluminium ingots for remelting for general engineering purposes (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Table-1, Clause - 6.1.1 (Copper)	-
Table-1, Clause - 6.1.1 (Iron)	-
Table-1, Clause - 6.1.1 (Magnesium)	-
Table-1, Clause - 6.1.1 (Titanium + Vanadium)	-
Table-1, Clause - 6.1.1 (Silicon)	-
Table-1, Clause - 6.1.1 (Vanadium)	-
Table-1, Clause - 6.1.1 (Zinc)	-
Table-1, Clause - 6.1.1 (Other elements (each))	-
Table-1, Clause - 6.1.1 (Others Total)	-
Table-1, Clause - 6.1.1 (Aluminium)	-
Table-1, Clause - 6.1.1 (Manganese)	-

-
5 pcs of 5x5 cm sample having dia > 3mm and/or thickness > 0.8 mm shall be provided

IS 6754 (1972)

Specification for aluminium alloy ingots for bearings

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Table-1, Clause - 4.1 (Copper)	-
Table-1, Clause - 4.1 (Magnesium)	-
Table-1, Clause - 4.1 (Titanium)	-
Table-1, Clause - 4.1 (Silicon)	-
Table-1, Clause - 4.1 (Nickel)	-
Table-1, Clause - 4.1 (Tin)	-
Table-1, Clause - 4.1 (Other elements)	-
Table-1, Clause - 4.1 (Total of Fe+Si+Mn)	-
Table-1, Clause - 4.1 (Aluminium)	-
Table-1, Clause - 4.1 (Manganese)	-

-
5 pcs of 5x5 cm sample having dia > 3mm and/or thickness > 0.8 mm shall be provided

IS 16988 (2018)

Compressed natural gas cylinder valve integrated with solenoid operation (Remotely Controlled) for automotive use - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.4.1 (Tensile Strength and Elongation)	-
5.4.2 (Impact Strength)	-
6.2 (Valve Dimensions)	-
7.2 (Relief/Bursting Pressure)	-
Clause-8.1 & 9 (Copper)	-
Clause-8.1 & 9 (Lead)	-
Clause-8.1 & 9 (Tin)	-
Clause-8.1 & 9 (Iron)	-
Clause-8.1 & 9 (Aluminium)	-
Clause-8.1 & 9 (Manganese)	-
Clause-8.1 & 9 (Nickel)	-
Clause-8.1 & 9 (Silicon)	-
Clause-8.1 & 9 (Chromium)	-
Clause-8.1 & 9 (Cobalt)	-
Clause-8.1 & 9 (Zinc)	-
Clause-8.1 & 9 (Other Impurities)	-

-
Steel designation may be declared . 5 pcs of 5x5 cm sample having dia > 3mm and/or thickness > 0.8 mm shall be provided.

IS 7129 (2021)

POTASSIUM CARBONATE ANHYDROUS SPECIFICATION (Second Revision)

- View breakup
• Total testing charges for the Pure Grade: Rs. 7607/- • Total testing charges for the Technical Grade: Rs. 6489/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Description)	-
4.3 - Table 1 - Sl No - i (Total Alkalinity (as K2CO3) - Annex A 2)	-
4.3 - Table 1 - Sl No - ii (Potassium bicarbonate (as KHCO3) - Annex A 3)	-
4.3 - Table 1 - Sl No - ii (Free alkali (as KOH)- Annex A 3)	-
4.3 - Table 1 - Sl No - iii (Sulphates (as K2SO4) - Annex A 4)	-
4.3 - Table 1 - Sl No - iv (Chlorides (as KCl) - Annex A 5)	-
4.3 - Table 1 - Sl No - v (Matter insoluble in water - Annex A 6)	-
4.3 - Table 1 - Sl No - vi (Iron (as Fe) - Annex A 7 & A 12)	-
4.3 - Table 1 - Sl No - vii (Heavy metals (as Pb - Annex A 8 & A 12)	-
4.3 - Table 1 - Sl No - viii (Loss on heating at 150oC - Annex A 9)	-
4.3 - Table 1 - Sl No - ix (Sodium (as Na) - Annex A 10 & A 12)	-
4.3 - Table 1 - Sl No - x (Calcium - Annex A 11 & A 12)	-
4.3 - Table 1 - Sl No - xi (Magnesium - Annex A 11 & A 12)	-

-
Test facility is complete for this IS

IS 15834 (2020)

Stainless Steel Sliding Door Bolts ( Aldrops ) for Use With Padlocks - Specification ( First Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5 (DIMENSIONS AND TOLERANCES)	-
Cl 5 (DIMENSIONS AND TOLERANCES)	-
Cl 5 (DIMENSIONS AND TOLERANCES)	-
Cl 5 (DIMENSIONS AND TOLERANCES)	-
Cl 5 (DIMENSIONS AND TOLERANCES)	-
6 (MANUFACTURE)	-
7 (FINISH)	-
Cl.4 (Carbon)	-
Cl.4 (Sulphur)	-
Cl.4 (Phosphorus)	-
Cl.4 (Manganese)	-
Cl.4 (Silicon)	-
Cl.4 (Nickel)	-
Cl.4 (Chromium)	-
Cl.4 (Copper)	-
Cl.4 (Molybdenum)	-
Cl.4 (Nitrogen)	-
Cl.4 (Titanium)	-
Cl.4 (Niobium)	-

-
Material Grade/ designation as per relevant IS may please be declared. Sample dia > 3mm or thickness > 0.8 mm can only be tested

IS 6438 (1980)

Specification for aluminium phosphide formulations (First Revision)

Rs 1800/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.3.1 (Aluminium Phosphide Content)	-
2.2.1 (Description)	-
2.3.2 (Evolution of Gas)	-

-
-

IS 209 (1992)

Zinc ingot - Specification (Fourth Revision)

Rs.8430/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause -6, 6.1, 6.2, Table-1 (ZINC)	-
Clause -6, 6.1, 6.2, Table-1 (LEAD)	-
Clause -6, 6.1, 6.2, Table-1 (CADMIUM)	-
Clause -6, 6.1, 6.2, Table-1 (IRON)	-
Clause -6, 6.1, 6.2, Table-1 (TIN)	-
Clause -6, 6.1, 6.2, Table-1 (COPPER)	-
Clause -6, 6.1, 6.2, Table-1 (THALLIUM)	-
Clause -6, 6.1, 6.2, Table-1 (INDIUM)	-
Clause -6, 6.1, 6.2, Table-1 (ALUMINIUM)	-
Clause -6, 6.1, 6.2, Table-1 (TOTAL IMPURITIES)	-
7 (Free from defects)	-
8 (Mass)	-

-
Material Grade/ designation as per IS 209 may please be declared

IS 9359 (1995)

Pesticide - Phorate G encapsulated - Specification

Rs 3880/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Constituents)	-
3.2.1 (Physical -Description)	-
3.2.2 (Physical - Sieving Requiremenr)	-
3.2.2.1 (ratio of lower to upper sieve sixes)	-
3.2.5 (Moisture Content)	-
3.3.1 (Phorate Content)	-
3.3.2 (Acidity)	-
3.2.4.2 (Encapsulation- The active ingredient in the water (%, by Mass))	-

-
-

IS 9356 (1980)

Specification for butachlor emulsifiable concentrates

Rs 3500/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.2.3 (Flash Point)	-
2.2.2 (Cold Test)	-
2.2.4 (Emulsion Stability)	-
2.2.1 (Description)	-
2.3.2 (Acidity)	-
2.3.1 (Butachlor Content, NV upto 9)	-
2.3.1 (Butachlor Content, NV above 9 below 50)	-
2.3.1 (Butachlor Content, NV above 50)	-
2.1.1 (Constituents)	-
2.2.2 (Cold Test)	-

-
-

IS 8028 (1987)

Specification for quinalphos Be (First Revision)

Rs 2450.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.2.1 (Description)	-
2.2.2 (Cold Test)	-
2.3.2 (Acidity/Alkalinity)	-
2.2.4 (Emulsion Stability)	-

-
-

IS 5719 (2017)

Gelatin, food grade - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Description)	-
4.2.1 (Solubility)	-
4.2.2 (Precipitate formation)	-
4.2.3 (Development of turbidity)	-
Cl. 4.3 (Table 1, S. no i) (Loss on drying)	-
Cl. 4.3 (Table 1, S. no ii) (Gel strengt)	-
Cl. 4.3 (Table 1, S. no iii) (Total Ash)	-
Cl. 4.3 (Table 1, S. no iv) (Sulphur dioxide)	-
Cl. 4.3 (Table 1, S. no v) (Nitrogen)	-
Cl. 4.3 (Table 1, S. no vi) (Lead)	-
Cl. 5.7(Table 1, S. no vii) (Arsenic)	-
Cl. 5.7 (Table 1, S. no viii) (Mercury)	-
Cl. 5.7 (Table 1, S. no ix) (Cadmium)	-
Cl. 5.7 (Table 1, S. no x) (Chromium)	-
Cl. 5.7 (Table 1, S. no xi) (Heavy Metals)	-
Cl. 4.5 (Microbiological Requirements)	-

-
-

IS 9537 : Part 4 (1983)

Specification for conduits for electrical installations: Part 4 pliable self - Recovering conduits of insulating materials

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Marking, IS 9537-4)	-
6.1 (Marking, IS 9537-4)	-
6.1 (Marking, IS 9537-4)	-
6.1 (Marking, IS 9537-4)	-
6.2 (Marking, IS 9537-4)	-
6.2.1 (Marking, IS 9537-4)	-
6.3 (Marking, Cl. 6.4 of IS 9537-1)	-
6.4 (Marking, IS 9537-4)	-
7.1 (Dimensions (Maximum outside Diameter), IS 9537-4)	-
7.3.3 (Uniformity of wall thickness, IS 9537-4)	-
8.1 (Construction, Cl. 8 of IS 9537-1)	-
9.3 (Mechanical Properties (Compression Test), IS 9537-4)	-
9.4 (Mechanical Properties (Impact Test), Cl. 9.4 of IS 9537-1)	-
11 (Resistance to burning, Cl. 11 of IS 9537-1)	-
12 (Electrical Strength, Cl. 12.1.1 of IS 9537-1)	-
12 (Insulation Resistance, Cl. 12.1.2 of IS 9537-1)	-

-
-

IS 3623 (1978)

Specification for guide and rubbing ropes (First Revision)

- View breakup
Rs 7212/- + charges as per referred ISS excluding Lubrication For elements other than C, P & N: Rs 1004/- per element

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Size - IS 3623)	-
3.2 (Length - IS 3623)	-
4.3 (Galvanized Test - IS 3623)	-
5, Table 1, Table 2 (Mass)	-
5, Table 1, Table 2 Annex B (Minimum Breaking Force - IS 16594 )	-
6.1-fig-1 (Construction)	-
6.2.1 (Construction)	-
7.1 (Workmanship)	-
7.2 (Joints)	-
3.1 (Size - IS 3623)	-
3.2 (Length - IS 3623)	-

-
-

IS 2888 (2004)

Toilet soap - Specification (Third Revision)

- View breakup
Rs. 4050/- each for Gr.1 & Gr.2 Rs. 4700/- for Gr.3

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.5, Table-1 (vii), Grade-3 (Lather)	-
5.5, Table-1 (vii), Grade-2 (Lather)	-
5.5, Table-1 (vii), Grade-1 (Lather)	-
5.5, Table-1 (vi), Grade-1, Grade-2 & Grade-3 (Free carbonated alkali)	-
5.5, Table-1 (v), Grade-1, Grade-2 & Grade-3 (Chloride (as sodium chloride), IS 286)	-
5.5, Table-1 (iv), Grade-2 & Grade-3 (Matter insoluble in alcohol, IS 286)	-
5.5, Table-1 (iv), Grade-1 (Matter insoluble in alcohol, IS 286)	-
5.5, Table-1 (iii), Grade-1, Gr-2 & Gr-3 (Free caustic alkali, as sodium hydroxide (NaOH), IS 286)	-
5.5, Table-1 (ii), Grade-1, Gr-2 & Gr-3 (Rosin acids, percent by mass of total fatty matter, IS 286 )	-
5.5, Table-1 (i), Grade-3 (Total fatty matter, IS 286)	-
5.5, Table-1 (i), Grade-2 (Total fatty matter, IS 286)	-
5.5, Table-1 (i), Grade-1 (Total fatty matter, IS 286)	-
5.5, Table-1 (vii), Grade-3 (Lather)	-
5.5, Table-1 (vii), Grade-2 (Lather)	-
5.5, Table-1 (vii), Grade-1 (Lather)	-
5.5, Table-1 (vi), Grade-1, Grade-2 & Grade-3 (Free carbonated alkali)	-
5.5, Table-1 (v), Grade-1, Grade-2 & Grade-3 (Chloride (as sodium chloride), IS 286)	-
5.5, Table-1 (iv), Grade-2 & Grade-3 (Matter insoluble in alcohol, IS 286)	-
5.5, Table-1 (iv), Grade-1 (Matter insoluble in alcohol, IS 286)	-
5.5, Table-1 (iii), Grade-1, Gr-2 & Gr-3 (Free caustic alkali, as sodium hydroxide (NaOH), IS 286)	-
5.5, Table-1 (ii), Grade-1, Gr-2 & Gr-3 (Rosin acids, percent by mass of total fatty matter, IS 286 )	-
5.5, Table-1 (i), Grade-3 (Total fatty matter, IS 286)	-
5.5, Table-1 (i), Grade-2 (Total fatty matter, IS 286)	-
5.5, Table-1 (i), Grade-1 (Total fatty matter, IS 286)	-

-
Excluding Clause 5.3 Table 1 (vii) Lather

IS 6444 (1979)

Specification for sulphur dusting powders (First Revision)

Rs.2100.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.2 Table 1 (Sulphur Content, NV upto 9)	-
2.2 Table 1 (Sulphur Content, NV Above 9 below 50)	-
2.2 Table 1 (Sulphur Content, NV above 50)	-
2.2 Table 1 (Material passing through 75 micron sieve)	-
2.1 (Description)	-
2.2 Table 1 (Bulk Density after compacting)	-
2.2 Table 1 (Sulphur Content, NV upto 9)	-
2.2 Table 1 (Sulphur Content, NV Above 9 below 50)	-
2.2 Table 1 (Sulphur Content, NV above 50)	-
2.2 Table 1 (Material passing through 75 micron sieve)	-
2.1 (Description)	-
2.2 Table 1 (Bulk Density after compacting)	-
2.2 Table 1 (Sulphur Content, NV upto 9)	-
2.2 Table 1 (Sulphur Content, NV Above 9 below 50)	-
2.2 Table 1 (Sulphur Content, NV above 50)	-
2.2 Table 1 (Material passing through 75 micron sieve)	-
2.1 (Description)	-
2.2 Table 1 (Bulk Density after compacting)	-

-
-

IS 16333 : Part 3 (2017)

Mobile phone handsets: Part 3 indian language support for mobile phone handsets - Specific requirements (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (Inputting of text)	-
5.2 (Message Readability)	-

-
-

IS 2980 (1999)

Non - Pressure stoves - Specification (Third Revision)

- View breakup
Rs. 5400/- and Material testing charges as per respective Iss

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.0 (MATERIAL)	-
5.1 (construction of the stoves)	-
5.2 (Fuel Leakage)	-
5.3 (Fuel container)	-
5.4 (Knob fro winding)	-
5.5 (Various components of stoves of one make)	-
5.6 (Perforated Sleeves)	-
5.8 (For Single-Wick and Multi-Wick Stoves)	-
6.2 (Thermal Efficiency Test)	-
6.3 (Combustion Efficiency)	-
6.4 (Flame Stability Test)	-
6.5 (Fuel Creep)	-
6.6 (Surface Temperature Test)	-
6.7 (Fuel Temperature Test)	-
6.8 (Flame Flash-Back Test)	-
6.9 (Stability Test)	-

-
-

IS 7123 (2019)

Hair oils - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause no 4.4/Annex A (A-3) (4 Examination)	-
Clause 4.5 (Peroxide Value)	-
Clause 4.6 (Arsenic Oxide)	-
Clause 4.6 (Lead)	-
Clause 4.3 (Acid Value)	-
Clause 4.1 (Description)	-
4.3, A-2.2 (Acid value)	-
4.5, A-4 (Peroxide value)	-
4.6, A-4 (Heavy metals)	-

-
-

IS 12916 (1990)

Acephate SP- Specification

Rs.2000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Description)	-
3.3.1 Table 1 i (Acephate Content)	-
3.3.1 Table 1 ii (Acidity (as H2SO4))	-

-
-

IS 6760 (1972)

Specification for slotted countersunk head wood screws

Rs.900.0 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1, Table 1 (Screw No. (Screw Design))	-
3.1, Table 1 (Diameter of Unthreaded Shank d, Nominal)	-
3.1, Table 1 (Diameter of Unthreaded Shank d, maximum)	-
3.1, Table 1 (Diameter of Unthreaded Shank d, Minimum)	-
3.1, Table 1 (Pitch)	-
3.1, Table 1 (Diameter of Head, D, Maximum)	-
3.1, Table 1 (Diameter of Head, D, Minimum)	-
3.1, Table 1 (Depth of Head c†, maximum)	-
3.1, Table 1 (Depth of Head c†, minimum)	-
3.1, Table 1 (Width of Slot s, maximum)	-
3.1, Table 1 (Width of Slot s, minimum)	-
3.1, Table 1 (Depth Slot n‡, Maximum)	-
3.1, Table 1 (Depth Slot n‡, Mainimum)	-
4.0 (Designation)	-
5.0 (General Requirements)	-

-
-

IS 6046 (1982)

Specification for gypsum for agricultural use (First Revision)

3881.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.2 (Sodium Content)	-
2.2 (Calcium Sulphate Content)	-
2.1 (Fineness)	-
2.2 (Sodium Content)	-
2.2 (Calcium Sulphate Content)	-

-
-

IS 916 (2000)

Square tins for solid products - Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Capacity)	-
4.2 (Dimension and Tolerances)	-
4.3.1 (Nominal Thickness)	-
4.3.2 (Handle wire diameter)	-
4.3.2 (Handle wire material)	-
4.4.1 (Body)	-
4.4.2 (Sides)	-
4.4.3 (Top and Bottom)	-
4.4.4 (Top and Bottom embossing)	-
4.4.5 (Handle)	-
4.4.6 (Closure)	-
4.4.7 (Supply condition)	-
4.4.8 (Internal Finish)	-
4.4.9 (External Treatment)	-
5.1 (Air-Pressure Test)	-
5.2 (Handle Pull Test)	-

-
Excluding 5.1 Air-Pressure Test, 5.2 Handle Pull Test,

IS 4109 (1967)

Specification for kadahies

Rs. 750/- and testing charges as per referred Iss View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2 (Materials)	-
3 (a) Round Shape / Bowl Shape)	-
3 (b) Nominal dia. at top D1 mm)	-
3 (c) Nominal overall Height H1 mm)	-
3 (d) Thickness at bottom mm Min)	-
4 (Manufacture and Workmanship)	-
6 (Test)	-

-
-

IS 285 (1992)

Laundry soaps - Specification (Third Revision)

- View breakup
For Type 1 -Rs.6000/-, For Type 2 Gr.1- Rs.4800/-, For Type 2 Gr.2-Rs.5100/- Average testing charges (all types and grades)-Rs.5300.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.4, Table-1 (ix) Type-2 (Built soap) Gr-2 (LSD/NSD content, IS 4955)	-
5.4, Table-1 (viii) Type-2 (Built soap) Gr-1 & Gr-2 (Chloride (as sodium chloride), IS 286)	-
5.4, Table-1 (viii) Type-1 (Pure soap) (Chloride (as sodium chloride), IS 286)	-
5.4, Table-1 (vii) Type-1 (Pure soap) (Glycerol, IS 286)	-
5.4, Table-1 (v) Type-2 (Built soap) Gr-1 (Matter insoluble in alcohol, IS 286)	-
5.4, Table-1 (v) Type-1 (Pure soap) (Matter insoluble in alcohol, IS 286)	-
5.4, Table-1 (iv) (Free caustic alkali, as sodium hydroxide (NaOH), IS 286)	-
5.4, Table-1 (iii) (Unsaponified fatty matter, IS 286)	-
5.4, Table-1 (ii) (Rosin acids, percent by mass of total fatty matter, IS 286 )	-
5.4, Table-1 (i) Type-2 (Built soap) Gr-2 (Total fatty matter, IS 286)	-
5.4, Table-1 (i) Type-2 (Built soap) Gr-1 (Total fatty matter, IS 286)	-
5.4, Table-1 (i) Type-1 (Pure soap) (Total fatty matter, IS 286)	-
5.3 (Odour and Lathering Properties, IS 286)	-
5.4, Table-1 (ix) Type-2 (Built soap) Gr-2 (LSD/NSD content, IS 4955)	-
5.4, Table-1 (viii) Type-2 (Built soap) Gr-1 & Gr-2 (Chloride (as sodium chloride), IS 286)	-
5.4, Table-1 (viii) Type-1 (Pure soap) (Chloride (as sodium chloride), IS 286)	-
5.4, Table-1 (v) Type-2 (Built soap) Gr-1 (Matter insoluble in alcohol, IS 286)	-
5.4, Table-1 (v) Type-1 (Pure soap) (Matter insoluble in alcohol, IS 286)	-
5.4, Table-1 (iv) (Free caustic alkali, as sodium hydroxide (NaOH), IS 286)	-
5.4, Table-1 (iii) (Unsaponified fatty matter, IS 286)	-
5.4, Table-1 (ii) (Rosin acids, percent by mass of total fatty matter, IS 286 )	-
5.4, Table-1 (i) Type-2 (Built soap) Gr-2 (Total fatty matter, IS 286)	-
5.4, Table-1 (i) Type-2 (Built soap) Gr-1 (Total fatty matter, IS 286)	-
5.4, Table-1 (i) Type-1 (Pure soap) (Total fatty matter, IS 286)	-
5.3 (Odour and Lathering Properties, IS 286)	-

-
-

IS 8074 (1990)

Monocrotophossl - Specification (Second Revision)

Rs.2750.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2 (Physical)	-
3.2.1 (Description)	-
3.2.2 (Cold Test)	-
3.2.3 (Flash Point ( Abel ))	-
3.3 (Chemical)	-
3.3.1 (Monocrotophos Content)	-
3.3.1.1 (actual value of the monocrotophos content)	-
3.3.1.2 (average monocrotophos content)	-
3.3.2 (Free Aceto-Acetic Acid Monomethyl-amide ( MMA ) Content)	-
3.3.3 (Acidit)	-

-
-

IS 10350 (2020)

Powder Hair Dyes — Specification ( Third Revision )

- View breakup
Rs.3700/- (excluding Solder testing) and Rs.1500/- for solder testing.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.6 Table 2 () Calculated active matter (as PPD) in the solution after recommended dilution with water/diluent, type 1)	-
4.5 Table 1 (Arsenic (as As2 O3 ), for all types)	-
4.6 Table 2 () Calculated active matter (as PPD) in the solution after recommended dilution with water/diluent, type 1)	-
4.6 Table 2 () Calculated active matter (as PPD) in the solution after recommended dilution with water/diluent, type 1)	-
4.5 Table 2 (pH, Type 3)	-
4.5 Table 1 (pH, type 1 and 2)	-
4.5 Table 1 (Active matter as PPD content, Type 1)	-
4.1 (description)	-
4.6 Table 2 () Calculated active matter (as PPD) in the solution after recommended dilution with water/diluent, type 1)	-
4.5 Table 1 (Arsenic (as As2 O3 ), for all types)	-
4.6 Table 2 () Calculated active matter (as PPD) in the solution after recommended dilution with water/diluent, type 1)	-
4.5 Table 1 (pH, type 1 and 2)	-
4.5 Table 1 (Heavy metals (as Pb), for all types)	-
4.5 Table 1 (Active matter as PPD content, Type 1)	-
4.1 (description)	-
4.5 Table 1 (Dye ingredients, type 3 only)	-

-
-

IS 4003 : Part 2 (1986)

Specification for pipe wrenches: Part 2 heavy duty (First Revision)

Rs. 3900/- and testing charges as per referred Iss View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 AND AS PER IS 1570 PART 2 (CARBON)	-
4 AND AS PER IS 1570 PART 2 (SULPHUR)	-
4 AND AS PER IS 1570 PART 2 (PHOSPHORUS)	-
4 AND AS PER IS 1570 PART 2 (MANGANESE)	-
4 AND AS PER IS 4454 PART 1 (CARBON)	-
4 AND AS PER IS 4454 PART 1 (SULPHUR)	-
4 AND AS PER IS 4454 PART 1 (PHOSPHORUS)	-
4 AND AS PER IS 4454 PART 1 (MANGANESE)	-
4 AND AS PER IS 4454 PART 1 (SILICON)	-
4 AND AS PER IS 4454 PART 1 (COPPER)	-
4 AND AS PER IS 4454 PART 1 (NITROGEN)	-
4 AND AS PER IS 4454 PART 1 (cu + cr + ni)	-
4 AND AS PER IS 4454 PART 1 (SULPHUR+ PHOSPHORUS)	-
4 AND AS PER IS 4454 PART 1 (MICRO ALLOY)	-
4 AND AS PER IS 2707 (CARBON)	-
4 AND AS PER IS 2707 (SULPHUR)	-
4 AND AS PER IS 2707 (PHOSPHORUS)	-
4 AND AS PER IS 2707 (MANGANESE)	-
4 AND AS PER IS 2707 (SILICON)	-
4 AND AS PER IS 2707 (MICRO ALLOY)	-
3 (Dimensions- Nominal Size)	-
3 (Dimensions-Capacity D min)	-
3 (Dimensions- Capacity D max)	-
3 (Dimensions- Jaw Thickness,T min)	-
3 (Dimensions- Length of movablejae, l1)	-
3 (Dimensions- Length of Handle, l2)	-
3 (Dimensions- Width of Nut, N)	-
5 (Hardness- Movable and heel Jaws)	-
5 (Hardness- Shank of movable Jaw)	-
5 (Hardness- Adjustable nut)	-
6.1 (Manufacture- Handel)	-
6.1 (Manufacture- Handel)	-
6.2 (Movable Jaw)	-
6.2 (Movable Jaw)	-
6.3 (Heel jaw)	-
6.3 (Heel jaw)	-
6.4 (Adjusting Nut)	-
6.4 (Adjusting Nut)	-
6.4 (Adjusting Nut)	-
6.5 (Springs)	-
6.5 (Springs)	-
7 (Workmanship & Finish)	-
7 (Workmanship & Finish)	-
8 (Operation)	-
11.1 (Static Load Test)	-
11.1 (Static Load Test)	-

-
Suitable grade of Material as per relevant IS may please be declared. Sample Size 5 pcs of 5x5 cm having dia> 3mm and thickness > 0.8 mm;

IS 9360 (1980)

Specification for carbofuran granules, bncapsulated

7200/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.3.2 (Acidity)	-
2.2.3 (Dust)	-
2.2.4 (Encapsulation)	-
2.2.6 (Moisture Content)	-
2.3.1 (Carbofuran Content, NV upto 9)	-
2.2.2 (Particle Size)	-

-
-

1
2
3
Next
Last

Bureau of Indian Standards

The National Standards Body of India

BIS, Central Laboratory (CL)

20/9, Site 4, Sahibabad Industrial Area, Sahibabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

- sample@bis.gov.in

Scope List