BIS - LIMS (Laboratory Information Management System)

Sleen India Biz venture Private Limited, Agra

RAHANKALAN ROAD, PART 295, BLOCK-A KUBERPUR, 300 METER FROM RAILWAY CROSSING CHALESHAR ROAD, Agra, Uttar Pradesh, India, 282006, Agra, Agra, Uttar Pradesh, 282006

8193022228 sleen.info@gmail.com

Scope List

Reset

138 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 5405 (2025)

Disposable Sanitary Napkin/Panty Liner/Maternity Pad/Period Panty - Specification ( Third Revision )

Sanitary Napkins

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Cover/Top sheet)	-	1000	-
3.2(Absorbent core)	-	500	-
3.3(Barrier or bottom sheet)	-	500	-
4.1(Types)	-	200	-
4.2(shapes)	-	300	-
5(Sizes)	-	1000	-
Cl. 5 Table-1(Type)	-	0	Test price for Clause 5 is 1000/-.
Cl. 5 Table-1(Size class)	-	0	Test price for Clause 5 is 1000/-.
Cl. 5 Table-1(Length (Absorbent core only))	-	0	Test price for Clause 5 is 1000/-.
Cl. 5 Table-1(Width (Absorbent core only))	-	0	Test price for Clause 5 is 1000/-.
6.1(Manufacture, workmanship and finish)	-	500	Test price for Clause 6 is 500/-.
6.2(Manufacture, workmanship and finish)	-	0	Test price for Clause 6 is 500/-.
7.1(pH value (IS 1390))	-	1000	-
7.2(Ability to withstand Pressure after absorption)	-	1000	-
7.3.1(Bacterial and Fungal Bioburden)	-	2000	-
7.3.2(Staphylococcus aureus)	-	2000	-
7.4(Biocompatibility evaluation - Cytotoxicity (IS/ISO 10993 P-5))	-	0	Under Exclusion.
7.4(Biocompatibility evaluation - Irritation (IS 17932 P-7))	-	0	Under Exclusion.
7.4(Biocompatibility evaluation - skin Sensitization (Optional) (IS 17932 P-6))	-	0	Under Exclusion.
Cl 7.5(Phthalate test- Combination)	-	6000	-
7.6(Compostability (Optional) (IS/ISO 17088))	-	0	Under Exclusion
7.7(Anti bacterial activity value (Optional) (IS/ISO 20743))	-	0	under exclusion
3.1(Cover/Top Sheet (non sterile gauze))	-	0	Test price for clause 3.1 is 800/-.
3.1(Cover/Top Sheet (sterile gauze))	-	0	Test price for clause 3.1 is 800/-.
5(Size)	-	0	Test price for Clause 5 is 1000/-.
Cl 7.5(Phthalate test- Di-iso-butyl phthalate (DIBP))	-	0	Complete test price for clause no. 7.5 is 6000/-.
Cl 7.5(Phthalate Test- Di-n-butyl phthalate (DBP))	-	0	Complete test price for clause no. 7.5 is 6000/-.
Cl 7.5(Phthalate Test- Benzylbutyl Phthalate (BBP))	-	0	Complete test price for clause no. 7.5 is 6000/-.
Cl 7.5(Phthalate Test- Bis-(2-ethylhexyl) phthalate (DEHP))	-	0	Complete test price for clause no. 7.5 is 6000/-.
Cl 7.5(Phthalate Test- Di-n-octyl phthalate (DNOP))	-	0	Complete test price for clause no. 7.5 is 6000/-.
Cl 7.5(Phthalate Test- Di-iso-nonylphthalate (DINP))	-	0	Complete test price for clause no. 7.5 is 6000/-.
Cl 7.5(Phthalate Test- Di-iso-decyl phthalate (DIDP))	-	0	Complete test price for clause no. 7.5 is 6000/-.

15 May, 2027

-
-

IS 9764 : Part 2 (2022)

Plain bearings Pressed bimetallic half thrust washers Features and tolerances

Outside diameter up to 160 mm

18450 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(Linear dimensions)	-	400	-
Cl-5(Angular dimensions)	-	400	-
Cl-6(Tolerance for the outside diameter, D)	-	400	-
Cl-6(Tolerance for the inside diameter, d)	-	400	-
Cl-6(Tolerances for heights HD and FD)	-	400	-
Cl-7(Total thickness, eT)	-	400	-
Cl-8.1(Lug width)	-	400	-
Cl-8.2(Notch recess)	-	500	-
Cl-8.3(Lug length)	-	400	-
Cl-9.1(Groove width, Gw)	-	400	-
Cl-10(Joint faces)	-	400	-
Cl-11.1(Radius on lug and joint faces and lug fillet radius, r2)	-	400	-
Cl-11.2(Joint face relief)	-	500	-
Cl-11.3(Chamfer or radius between the sliding surface and side faces, r3)	-	500	-
Cl-11.4(Chamfer or radius between back and external side face)	-	500	-
Cl-12(Flatness)	-	500	-
Cl-13.(Surface roughness)	-	4500	-
Cl-14, (National Annex A) Table-12 (1)(Tin-based white metal)	-	3000	-
Cl-14, (National Annex A) Table-12 (2)(Lead-based white metal)	-	0	Test Price for Clause no. 14-table-12 is 3000/-.
Cl-14, (National Annex A) Table-12 (3)(Copper-based alloys)	-	0	Test Price for Clause no. 14-table-12 is 3000/-.
Cl-14, (National Annex A) Table-12 (4)(Aluminum-based alloys)	-	0	Test Price for Clause no. 14-table-12 is 3000/-.
Cl-14, (National Annex A) Table-13(C)	-	2500	-
Cl-14, (National Annex A) Table-13(Mn)	-	0	Complete test price for clause no. 14-table-13 is 2500/-.
Cl-14, (National Annex A) Table-13(Si)	-	0	Complete test price for clause no. 14-table-13 is 2500/-.
Cl-14, (National Annex A) Table-13(S)	-	0	Complete test price for clause no. 14-table-13 is 2500/-.
Cl-14, (National Annex A) Table-13(P)	-	0	Complete test price for clause no. 14-table-13 is 2500/-.
Cl-14, (National Annex A) Table-13(Hardness Range HV10)	-	0	Complete test price for clause no. 14-table-13 is 2500/-.
Cl-15, (National Annex A)(Workmanship and Finish)	-	500	-
Cl-16, (National Annex B)(Marking)	-	250	-
Cl-9.2(Wall thickness at the back of the groove)	-	400	-
Cl-9.3(Groove position (with respect to the axis), Gx)	-	400	-

15 May, 2027

-
Included w.e.f 18.08.2025

IS 9764 : Part 1 (2022)

Plain bearings Ring type thrust washers made from strip Dimensions and tolerances

Inside diameters from 6 to 80 mm

10250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5, Table-2(Nominal bush housing diametera)	-	1500	-
Cl-5, Table-2(Inside diameter d)	-	0	Complete test price for clause no. 5 is 1500/-.
Cl-5, Table-2(Outside diameter D)	-	0	Complete test price for clause no. 5 is 1500/-.
Cl-5, Table-2(Thickness Et)	-	0	Complete test price for clause no. 5 is 1500/-.
Cl-5, Table-2(Pitch circle diameter C)	-	0	Complete test price for clause no. 5 is 1500/-.
Cl-5, Table-2(Dowel hole diameter F)	-	0	Complete test price for clause no. 5 is 1500/-.
Cl-6(OiI grooves)	-	500	-
Cl-7(Flatness of washer)	-	500	-
Cl-9, (National Annex A) Table-3 (1)(Tin-based white metal)	-	3000	-
Cl-9, (National Annex A) Table-3 (2)(Lead-based white metal)	-	0	Test price for clause no.9 Table 3 is 3000/- for each type of material.
Cl-9, (National Annex A) Table-3 (3)(Copper-based alloys)	-	0	Test price for clause no.9 Table 3 is 3000/- for each type of material.
Cl-9, (National Annex A) Table-3 (4)(Aluminum-based alloys)	-	0	Test price for clause no.9 Table 3 is 3000/- for each type of material.
Cl-9, (National Annex A) Table-4(C)	-	2500	Complete test price for clause no.9-Table-4 is 2500/- .
Cl-9, (National Annex A) Table-4(Mn)	-	0	Complete test price for clause no.9-Table-4 is 2500/- .
Cl-9, (National Annex A) Table-4(Si)	-	0	Complete test price for clause no.9-Table-4 is 2500/- .
Cl-9, (National Annex A) Table-4(S)	-	0	Complete test price for clause no.9-Table-4 is 2500/- .
Cl-9, (National Annex A) Table-4(P)	-	0	Complete test price for clause no.9-Table-4 is 2500/- .
Cl-9, (National Annex A) Table-4(Hardness Range HV10)	-	1500	-
Cl-10, (National Annex A)(Workmanship and Finish)	-	500	-
Cl-11, (National Annex B)(Marking)	-	250	-

15 May, 2027

-
Included w.e.f 18.08.2025

IS 6458 (1972)

Specification for double row cylindrical roller bearings

18500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Types )	-	500	-
4(Symbols )	-	500	-
5.1(Boondary Dimensions )	-	1500	-
5.2(Tolerances )	-	1500	-
5.3(Radial CIearances )	-	1500	-
6(General Requirements )	-	12500	-
7(Designation)	-	500	-

15 May, 2027

-
Included w.e.f 18.08.2025

IS 6456 (1972)

Specification for double row radial ball bearings

18500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Types )	-	500	-
4(Symbol)	-	500	-
5.1(Boundary Dimensions)	-	1500	-
5.2(Tolerances )	-	1500	-
5.3(Radial Clearances )	-	1500	-
6(General Requirements)	-	12500	-
7(Designation)	-	500	-

15 May, 2027

-
Included w.e.f 18.08.2025

IS 6455 (2020)

Single Row Deep Groove Ball Bearings — Specification ( First Revision )

All size

32500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Radial Ball Bearings with Flanged Outer Ring)	-	1000	-
4.2(Radial Ball Bearings)	-	1000	-
5(Tolerances and geometrical characteristics)	-	1500	-
6(Rolling element )	-	5000	-
7(Material of races and balls)	-	5000	-
8(Cage )	-	2500	-
9.2(Radial Internal clearance)	-	1000	-
10(Surface finish)	-	3000	-
11(Hardness)	-	2500	-
12(Load Rating)	-	6000	-
13(Workmanship and delivery requirement)	-	3500	-
14(Packing)	-	250	-
15(Marking)	-	250	-

15 May, 2027

-
Included w.e.f 18.08.2025

IS 16011 (2012)

Aluminium and aluminium alloy foil for pharmaceutical packaging - Specification

All type

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5- Table-1(Pin hole count- IS 16011)	-	250	-
6(Freedom from defects- IS 16011)	-	250	-
7.1(Al - IS 504)	-	250	-
7.1(Cu - IS 504)	-	250	-
7.1(Mn - IS 504)	-	250	-
7.1(Si - IS 504)	-	250	-
7.1(Fe- IS 504)	-	250	-
7.1(Mn- IS 504)	-	250	-
7.1(Zn- IS 504)	-	250	-
7.1(Cr- IS 504)	-	250	-
7.1(Ti- IS 504)	-	250	-
7.2(Material - IS 16011)	-	250	-
7.3(Material - IS 16011)	-	250	-
7.4(Material - IS 16011)	-	250	-
7.5(Material - IS 16011)	-	250	-
9(LUBRICANTS- IS 16011)	-	500	-
11(AVERAGE THICKNESS OF BARE FOIL - IS 16011)	-	500	-
12.1(Pharma Laminate - IS 16011)	-	500	-
12.2(Coated Blister Pack Foil- IS 16011)	-	500	-
12.3(Winding- IS 16011)	-	250	-
13.1(thickness of laminated products - IS 16011)	-	500	-
13.2(Width- IS 16011)	-	250	-
14.1-Tsable 4(Bursting strength for bare strip pack foil )	-	500	-
14.1-Tsable 4(Bursting strength for pharma laminate)	-	0	Complete test price for cl.14.1 Bursting Strength is 500/-.
14.2-Tsable 5(Peel Strength (for Pharma Laminate))	-	500	-
14.3-Tsable 6(Sealing Strength (for Coated Blister Pack Foil ))	-	500	-
14.3-Tsable 6(Sealing Strength (for Pharma Laminate))	-	0	Complete test price for cl.14.3 Sealing Strength is 500/-.
15.1(SURFACE CONDITION- IS16011)	-	500	-
15.2(SURFACE CONDITION- IS 16011)	-	0	Test price for cl.15 SURFACE CONDITION is 500/-.
5- Table-1(Pin hole count- IS 16011)	-	0	Repeated Clause.
6(Freedom from defects- IS 16011)	-	0	Repeated Clause.
7.1(Al - IS 504)	-	0	Repeated Clause.
7.1(Cu - IS 504)	-	0	Repeated Clause.
7.1(Mn - IS 504)	-	0	Repeated Clause.
7.1(Si - IS 504)	-	0	Repeated Clause.
7.1(Fe- IS 504)	-	0	Repeated Clause.
7.1(Mn- IS 504)	-	0	Repeated Clause.
7.1(Zn- IS 504)	-	0	Repeated Clause.
7.1(Cr- IS 504)	-	0	Repeated Clause.
7.1(Ti- IS 504)	-	0	Repeated Clause.
7.2(Material - IS 16011)	-	0	Repeated Clause.
7.3(Material - IS 16011)	-	0	Repeated Clause.
7.4(Material - IS 16011)	-	0	Repeated Clause.
7.5(Material - IS 16011)	-	0	Repeated Clause.
9(LUBRICANTS- IS 16011)	-	0	Repeated Clause.
11(AVERAGE THICKNESS OF BARE FOIL - IS 16011)	-	0	Repeated Clause.
12.1(Pharma Laminate - IS 16011)	-	0	Repeated Clause.
12.2(Coated Blister Pack Foil- IS 16011)	-	0	Repeated Clause.
12.3(Winding- IS 16011)	-	0	Repeated Clause.
13.1(thickness of laminated products - IS 16011)	-	0	Repeated Clause.
13.2(Width- IS 16011)	-	0	Repeated Clause.
14.1-Tsable 4(Bursting strength for bare strip pack foil )	-	0	Repeated Clause.
14.1-Tsable 4(Bursting strength for pharma laminate)	-	0	Repeated Clause.
14.3-Tsable 6(Sealing Strength (for Coated Blister Pack Foil ))	-	0	Repeated Clause.
14.3-Tsable 6(Sealing Strength (for Pharma Laminate))	-	0	V
15.1(SURFACE CONDITION- IS16011)	-	0	Repeated Clause.
15.2(SURFACE CONDITION- IS 16011)	-	0	Repeated Clause.
5 table -1(PINHOLE COUNT)	-	0	Repeated Clause.
6(FREEDOM FROM DEFECTS)	-	0	Repeated Clause.
7.1(MATERIAL)	-	0	Repeated Clause.
7.2(MATERIAL)	-	0	V
7.3(MATERIAL)	-	0	Repeated Clause.
7.4(MATERIAL)	-	0	Repeated Clause.
7.5(MATERIAL)	-	0	Repeated Clause.
8(SUPPLY OF MATERIAL)	-	0	Repeated Clause.
9(LUBRICANTS)	-	0	Repeated Clause.
10 TABLE -2(PREFERRED THICKNESSES)	-	300	-
11.2(AVERAGE THICKNESS OF BARE FOIL)	-	250	-
12.1(Pharma Laminate)	-	0	Repeated Clause.
12.2(Coated Blister Pack Foil)	-	0	Repeated Clause.
12.3(Winding)	-	0	Repeated Clause.
13.1(DIMENSIONS AND TOLERANCES)	-	0	Repeated Clause.
13.2 table 3(DIMENSIONS AND TOLERANCES)	-	0	Repeated Clause.
14.1 table -4(Bursting Strength)	-	0	Repeated Clause.
14.1.1(Bursting Strength)	-	500	Repeated Clause.
14.2 table -5(Peel Strength (for Pharma Laminate))	-	0	Repeated Clause.
14.3 table -6(Sealing Strength (for Coated Blister Pack Foil and Pharma Laminate))	-	0	Repeated Clause.
15.1(SURFACE CONDITION)	-	0	Repeated Clause.
15.2(SURFACE CONDITION)	-	0	Repeated Clause.
16.2.1 , table -7(SAMPLING)	-	250	-
16.2.2 ,table -7(SAMPLING)	-	250	-
18.1(marking)	-	250	-
14.2-Tsable 5(Peel Strength (for Pharma Laminate))	-	0	Repeated Clause.

15 May, 2027

-
Included w.e.f. 14.08.2025

IS 15138 (2024)

Textiles - Jute Bags For Packing 50 Kg Sugar - Specification (second revision)

All Types

6250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 4.1(Febric)	-	250	-
As per Clause 4.1.1(Febric)	-	250	-
As per Clause 4.2(Seam)	-	250	-
As per Clause 4.3(Hemming at the mouth)	-	250	-
As per Clause 4.4(Freedom from defects)	-	500	-
As per Clause 5,5.1,5.2(Table 1)(i). Dimension,(a.-outside length) (b.-outside width))	-	500	-
As per Clause 5,5.1,5.2(Table 1)(ii). Ends/dm)	-	500	-
As per Clause 5,5.1,5.2(Table 1)(iii). Picks/dm)	-	500	-
As per Clause 5,5.1,5.2(Table 1)(iv). Corrected mass per bags)	-	500	-
As per Clause 5,5.1,5.2(Table 1)(v). Average breaking load of sacking(a) warpway (b)weftway)	-	750	-
As per Clause 5,5.1,5.2(Table 1)(vi). Average breaking load of seam(a) warpway (b)weftway)	-	750	-
As per Clause 5,5.1,5.2(Table 1)(vii).Moisture regain)	-	500	-
As per Clause 5,5.1,5.2(Table 1)(viii).oil content)	-	750	-

15 May, 2027

-
Included w.e.f. 04.08.2025

IS 10203 (1982)

Technical supply conditions for thin - Walled plain bearings

13500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Materials)	-	2500	-
4(Dimensions and Tolerances )	-	1000	-
5(Workmanship)	-	1500	-
6(Surface Finish )	-	3000	-
7(Chemical Composition )	-	2500	-
9(Packing )	-	3000	-
10(Marking)	-	500	-

15 May, 2027

-
Included w.e.f 01.08.2025

IS 5149 (2020)

Specification for Maleic Anhydride, Technical ( Second Revision )

7400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.2.1(Description)	-	500	-
Cl.2.2, Table-1(i)(Crystallizing point)	-	1000	-
Cl.2.2, Table-1(ii)(Colour of the molten material)	-	1400	-
Cl.2.2, Table-1(iii)(Maleic acid content)	-	1000	-
Cl.2.2, Table-1(iv)(Maleic anhydride content)	-	1000	-
Cl.2.2, Table-1(v)(Ash)	-	500	-
Cl.2.2, Table-1(vi)(Iron content (as Fe))	-	2000	-

15 May, 2027

-
Included w.e.f 04.08.2025

IS 4605 (2020)

Crepe Bandage - Specification ( Second Revision )

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.5(Breaking Load)	-	450	-
8.3( Elasticity)	-	450	-
8.2( Weight per Unit Area)	-	250	-
8.1( Threads per Stated Length 2)Ends)	-	250	-
8.1( Threads per Stated Length 1)Ends)	-	0	Complete test price for cl. 8.1 is 500/-.
6.0( Workmanship and finish )	-	250	-
5.2(The selvedge )	-	250	-
5.1.2 (Weft Yarns)	-	400	-
5.1.1 (Warp Yarns)	-	0	Complete test price for cl. 5.12 is 500/-.
4 (Annexure B)(DIMENSIONS 2) Length (Stretched))	-	250	-
4.0( DIMENSIONS 1)Width (cm) (Unstretched))	-	250	-
3.0(MATERIAL)	-	400	-
Clause.8.7(Ether Soluble Substances)	-	400	-
Clause.8.6(Water Soluble Substances)	-	400	-
Clause.8.4(Chemical Neutrality)	-	500	-
Clause 3(Material used in manufacturing of crepe bandage)	-	0	-
Clause 3(Quality of Rayon)	-	0	-
Clause 4(Dimensions (width, cm and length , m))	-	0	-
Clause 5.1.1(Warp Yarns)	-	0	-
Clause 5.1.2(Weft Yarns)	-	0	-
Clause 8.1(Threads per Stated Length)	-	0	-
Clause 8.2(Weight per Unit Area)	-	0	-
Clause 8.3(Elasticity)	-	0	-
Clause 8.4(PH for Chemical neutrality)	-	0	-
Clause 8.5(Breaking Load , N)	-	0	-
Clause 8.6(Water Soluble Substances , percent)	-	0	-
Clause 8.7(Ether Soluble Substances, percent)	-	0	-

15 May, 2027

-
Included w.e.f. 04.08.2025

IS 6100 (2021)

SPECIFICATION FOR SODIUM TRIPOLYPHOSPHATE ANHYDROUS TECHNICALSecond Revision of IS 6100

21800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Description - IS 6100:2021)	-	500	-
3.2(Sieve Analysis (Retained on 500 micron IS Sieve) - IS 6100:2021)	-	500	-
3.2(Sieve Analysis (Passing through 500 micron IS Sieve but retained on 150 micron IS sieve) - IS 6100:2021)	-	0	Complete test price for cl.3.2 is 500/-.
3.2(Sieve Analysis (Passing through 150 micron IS Sieve but retained on 75 micron IS sieve) - IS 6100:2021)	-	0	Complete test price for cl.3.2 is 500/-.
3.2(Sieve Analysis (Passing through 75 micron IS Sieve) - IS 6100:2021)	-	0	Complete test price for cl.3.2 is 500/-.
3.3/Table 1 (i)(Moisture - IS 6100:2021)	-	500	-
3.3/Table 1 (ii)(Matter insoluble in water - IS 6100:2021)	-	900	-
3.3/Table 1 (iii)(Phosphorus (as P2O5) - IS 6100:2021)	-	3000	-
3.3/Table 1 (iv)(pH - IS 6100:2021)	-	900	-
3.3/Table 1 (v)(Iron (as Fe2O3) - IS 6100:2021)	-	3000	-
3.3/Table 1 (vi)(Copper (as Cu) - IS 6100:2021)	-	3000	-
3.3/Table 1 (vii)(Lead (as Pb) - IS 6100:2021)	-	2000	-
3.3/Table 1 (viii)(Tripolyphosphate content (as Na5P3O10) - IS 6100:2021)	-	3000	-
3.3/Table 1 (ix)(Chloride (as NaCl) - IS 6100:2021)	-	1500	-
3.3/Table 1 (x)(Fluoride (as NaF) - IS 6100:2021)	-	1000	-
3.3/Table 1 (xi)(Bulk Density - IS 6100:2021)	-	1000	-
3.4(Temperature Rise - IS 6100:2021)	-	1500	-

15 May, 2027

-
Included w.e.f 01.08.2025

IS 4105 (2023)

Styrene (vinyl benzene) - Specification (Third Revision)

19500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3.1(Description)	-	500	-
Cl-3.1 & 6.1, Table-1 (i)(Colour, Pt-Co, Max)	-	500	-
Cl-3.1 & 6.1, Table-1 (ii)(Relative density at 27 °C /27 °C)	-	500	-
Cl-3.1 & 6.1, Table-1 (iii)(Refractive index at 27 ºC, Min)	-	1000	-
Cl-3.1 & 6.1, Table-1 (iv)(Freezing point, Min)	-	1000	-
Cl-3.1 & 6.1, Table-1 (v)(Assay, percent by mass, Min)	-	2000	-
Cl-3.1 & 6.1, Table-1 (vi)(Aldehyde, percent by mass (as benzaldehyde), Max)	-	2000	-
Cl-3.1 & 6.1, Table-1 (vii)(Peroxides, percent by mass (as H2O2 ), Max)	-	500	-
Cl-3.1 & 6.1, Table-1 (viii)(Sulphur, percent by mass, Max)	-	1000	-
Cl-3.1 & 6.1, Table-1 (ix)(Chlorides, percent by mass, Max)	-	1000	-
Cl-3.1 & 6.1, Table-1 (x)(Polymer content, ppm, Max)	-	1000	-
Cl-3.1 & 6.1, Table-1 (xii)(Inhibitor content (ptertiary butyl catechol) , ppm)	-	1000	-
Cl-3.1 & 6.1, Table-1 (xiii)(Ethyl benzene, percent by mass, Max)	-	2500	-
Cl-3.1 & 6.1, Table-1 (xiv)(Alpha methyl styrene, percent by mass, Max)	-	2500	-
Cl-3.1 & 6.1, Table-1 (xv)(Benzene, ppm, Max)	-	2500	-

15 May, 2027

-
Included w.e.f 01.08.2025

IS 2074 (2023)

Ready Mixed Paint Air Drying Red Oxide Zinc Chrome Priming -Specification (Fourth Revision)

25400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(The smell of the material shall not be objectionable during application)	-	500	-
Cl-5.1 (a)(Pigment)	-	500	-
Cl-5.1 (b)(Driers)	-	500	-
Cl-5.1.1 (a)("Zinc oxide content Chromic anhydride content")	-	700	-
Cl-5.1.1 (b)(Synthetic red oxides of iron or Natural red oxides of iron or A mixture of both which shall correspond to red oxide, percent by mass)	-	700	-
Cl-5.1.1 (c)(Suitable extenders)	-	500	-
Cl-5.1.2(volatile vehicle)	-	1000	-
Cl-5.2(Material)	-	800	-
Cl-5.3(Compatibility with Thinner)	-	500	-
Cl-5.4(Freedom from Objectionable Impurities)	-	700	-
Cl-5.5(Lead Restriction)	-	1000	-
Cl-5.6 & 8 Table-1 (i) (a)(Consistency)	-	300	-
Cl-5.6 & 8, Table-1 (i) (b)(Viscosity by ford cup No. 4 at 27±2°C)	-	500	-
Cl-5.6 & 8, Table-1 (ii)(Mass, in kg/10 1, Min)	-	300	-
Cl-5.6 & 8, Table-1 (iii)("Drying time, h, Max a) Surface dry b) Hard dry")	-	300	-
Cl-5.6 & 8, Table-1 (iv)(a) Finish)	-	200	-
Cl-5.6 & 8, Table-1 (iv)(b) Gloss 60° , Max)	-	500	-
Cl-5.6 & 8, Table-1 (v)(Fineness of grind, microns, Max)	-	500	-
Cl-5.6 & 8, Table-1 (vi)(Colour)	-	300	-
Cl-5.6 & 8,, Table-1 (vii) a)(Flexibility and adhesion: Bend test with 6.25mm dia mandrel and in type 1 apparatus)	-	500	-
Cl-5.6 & 8,, Table-1 (vii) b)(Flexibility and adhesion: Scratch hardness)	-	500	-
Cl-5.6 & 8, Table-1 (viii)(Flash point)	-	700	-
Cl-5.6 & 8,, Table-1 (ix)(Volume solids, percent)	-	800	-
Cl-5.6 & 8,, Table-1 (x) (a)(Resistance to humidity)	-	1500	-
Cl-5.6 & 8, Table-1 (x) (b)("Resistance to sea water (applicable for marine paints only)")	-	500	-
Cl-5.6 & 8, Table-1 (x) (c)(Resistance to salt spray)	-	500	-
Cl-5.6 & 8, Table-1 (xi)(Accelerated storage stability test)	-	500	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Visual observation (Corrosion and odour of putrefaction, rancidity or souring) ")	-	8000	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Change in skinning")	-	0	Complete test price for cl.5.6 & table-1 Keeping Properties is 10000/-.
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Degree of settling ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Observation of dried film ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Loss of mass resulting from Storage ")	-	0	-
Cl-5.7, Table-2 (i)(Consistency)	-	0	Test price as per Clause 5.6 table-1(a) is 300/-.
Cl-5.7, Table-2 (ii)(Hard dry, h, Max)	-	300	-
Cl-5.7, Table-2 (iii)(Non- volatile vehicle, percent, Min)	-	300	-
Cl-5.7, Table-2 (iv)(Wet opacity, m2 /10 l, Min)	-	800	-

15 May, 2027

-
Included w.e.f. 07.08.2025

IS 15041 (2001)

Textiles – Flat woven webbing slings made of man-made fibres for general services

Polyamide,Polyester and Polypropylene HTCM

22500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(REQUIREMENTS :-Webbing)	-	2500	-
4.1.2.1(Weaving)	-	1500	-
4.1.2.2(Weaving)	-	500	-
4.1.3(Width)	-	1000	-
4.1.4(Thickness)	-	500	-
4.1.5( Dyeing)	-	3000	-
4.1.6(Other Treatments, Afiertreatments or Coverings)	-	3000	-
4.2.1(Sewing of Slings)	-	250	-
4.2.2(Sewing of Slings)	-	250	-
4.2.3(Sewing of Slings)	-	250	-
4.2.3.1(Sewing of Slings)	-	250	-
4.2.4 (Sewing of Slings)	-	250	-
4.2.4.1(Sewing of Slings)	-	250	-
4.2.5(Sewing of Slings)	-	250	-
4.2.5.1(Sewing of Slings)	-	250	-
4.3.1,Fig. 10(Soft Eyes)	-	500	-
4.3.2(Soft Eyes)	-	500	-
4.4.1(End Fittings :General)	-	500	-
4.4.2(End Fittings :Material)	-	1000	-
4.4.3 (End Fittings :-Finish)	-	500	-
4.4.4 (End Fittings :-Form)	-	500	-
4.4.5 & 5.4(End Fittings :-Proof Testing)	-	1000	-
4.5 & 5.2(Working Load Limit)	-	2000	-
4.6 & A-2(Maximum Safe Working Load)	-	2000	-
6.1 (a)(MARKING)	-	1000	-
6.1 (b)(MARKING)	-	0	Complete test price for cl. 6.1 Marking is 1000/-.
6.1 (c)(MARKING)	-	0	Complete test price for cl. 6.1 Marking is 1000/-.
6.1 (d)(MARKING)	-	0	Complete test price for cl. 6.1 Marking is 1000/-.
6.1 (e)(MARKING)	-	0	Complete test price for cl. 6.1 Marking is 1000/-.
6.2(MARKING)	-	0	Complete test price for cl. 6.1 Marking is 1000/-.
4.1.1(REQUIREMENTS :-Webbing)	-	0	Repeated Clause.
4.1.2.1(Weaving)	-	0	Repeated Clause.
4.1.2.2(Weaving)	-	0	Repeated Clause.
4.1.3(Width)	-	0	Repeated Clause.
4.1.4(Thickness)	-	0	Repeated Clause.
4.1.5( Dyeing)	-	0	Repeated Clause.
4.1.6(Other Treatments, Afiertreatments or Coverings)	-	0	Repeated Clause.
4.2.1(Sewing of Slings)	-	0	Repeated Clause.
4.2.2(Sewing of Slings)	-	0	Repeated Clause.
4.2.3(Sewing of Slings)	-	0	Repeated Clause.
4.2.3.1(Sewing of Slings)	-	0	Repeated Clause.
4.2.4 (Sewing of Slings)	-	0	Repeated Clause.
4.2.4.1(Sewing of Slings)	-	0	Repeated Clause.
4.2.5(Sewing of Slings)	-	0	Repeated Clause.
4.2.5.1(Sewing of Slings)	-	0	Repeated Clause.
4.3.1,Fig. 10(Soft Eyes)	-	0	Repeated Clause.
4.3.2(Soft Eyes)	-	0	Repeated Clause.
4.4.1(End Fittings :General)	-	0	Repeated Clause.
4.4.2(End Fittings :Material)	-	0	Repeated Clause.
4.4.3 (End Fittings :-Finish)	-	0	Repeated Clause.
4.4.4 (End Fittings :-Form)	-	0	Repeated Clause.
4.4.5 & 5.4(End Fittings :-Proof Testing)	-	0	Repeated Clause.
4.5 & 5.2(Working Load Limit)	-	0	Repeated Clause.
4.6 & A-2(Maximum Safe Working Load)	-	0	Repeated Clause.
6.1 (a)(MARKING)	-	0	Repeated Clause.
6.1 (b)(MARKING)	-	0	Repeated Clause.
6.1 (c)(MARKING)	-	0	Repeated Clause.
6.1 (d)(MARKING)	-	0	Repeated Clause.
6.1 (e)(MARKING)	-	0	Repeated Clause.
6.2(MARKING)	-	0	Repeated Clause.
4.1.1(REQUIREMENTS :-Webbing)	-	0	Repeated Clause.
4.1.2.1(Weaving)	-	0	Repeated Clause.
4.1.2.2(Weaving)	-	0	Repeated Clause.
4.1.3(Width)	-	0	Repeated Clause.
4.1.4(Thickness)	-	0	Repeated Clause.
4.1.5( Dyeing)	-	0	Repeated Clause.
4.1.6(Other Treatments, Afiertreatments or Coverings)	-	0	Repeated Clause.
4.2.1(Sewing of Slings)	-	0	Repeated Clause.
4.2.2(Sewing of Slings)	-	0	Repeated Clause.
4.2.3(Sewing of Slings)	-	0	Repeated Clause.
4.2.3.1(Sewing of Slings)	-	0	Repeated Clause.
4.2.4 (Sewing of Slings)	-	0	Repeated Clause.
4.2.4.1(Sewing of Slings)	-	0	Repeated Clause.
4.2.5(Sewing of Slings)	-	0	Repeated Clause.
4.2.5.1(Sewing of Slings)	-	0	Repeated Clause.
4.3.1,Fig. 10(Soft Eyes)	-	0	Repeated Clause.
4.3.2(Soft Eyes)	-	0	Repeated Clause.
4.4.1(End Fittings :General)	-	0	Repeated Clause.
4.4.2(End Fittings :Material)	-	0	Repeated Clause.
4.4.3 (End Fittings :-Finish)	-	0	Repeated Clause.
4.4.4 (End Fittings :-Form)	-	0	Repeated Clause.
4.4.5 & 5.4(End Fittings :-Proof Testing)	-	0	Repeated Clause.
4.5 & 5.2(Working Load Limit)	-	0	Repeated Clause.
4.6 & A-2(Maximum Safe Working Load)	-	0	Repeated Clause.
6.1 (a)(MARKING)	-	0	Repeated Clause.
6.1 (b)(MARKING)	-	0	Repeated Clause.
6.1 (c)(MARKING)	-	0	Repeated Clause.
6.1 (d)(MARKING)	-	0	Repeated Clause.
6.1 (e)(MARKING)	-	0	Repeated Clause.
6.2(MARKING)	-	0	Repeated Clause.
4.1.1(REQUIREMENTS :-Webbing)	-	0	Repeated Clause.
4.1.2.1(Weaving)	-	0	Repeated Clause.
4.1.2.2(Weaving)	-	0	Repeated Clause.
4.1.3(Width)	-	0	Repeated Clause.
4.1.4(Thickness)	-	0	Repeated Clause.
4.1.5( Dyeing)	-	0	Repeated Clause.
4.1.6(Other Treatments, Afiertreatments or Coverings)	-	0	Repeated Clause.
4.2.1(Sewing of Slings)	-	0	Repeated Clause.
4.2.3(Sewing of Slings)	-	0	Repeated Clause.
4.2.3.1(Sewing of Slings)	-	0	Repeated Clause.
4.2.4 (Sewing of Slings)	-	0	Repeated Clause.
4.2.4.1(Sewing of Slings)	-	0	Repeated Clause.
4.2.5(Sewing of Slings)	-	0	Repeated Clause.
4.2.5.1(Sewing of Slings)	-	0	Repeated Clause.
4.3.1,Fig. 10(Soft Eyes)	-	0	Repeated Clause.
4.3.2(Soft Eyes)	-	0	Repeated Clause.
4.4.1(End Fittings :General)	-	0	Repeated Clause.
4.4.2(End Fittings :Material)	-	0	Repeated Clause.
4.4.3 (End Fittings :-Finish)	-	0	Repeated Clause.
4.4.4 (End Fittings :-Form)	-	0	Repeated Clause.
4.4.5 & 5.4(End Fittings :-Proof Testing)	-	0	Repeated Clause.
4.5 & 5.2(Working Load Limit)	-	0	Repeated Clause.
4.6 & A-2(Maximum Safe Working Load)	-	0	Repeated Clause.
6.1 (a)(MARKING)	-	0	Repeated Clause.
6.1 (b)(MARKING)	-	0	Repeated Clause.
6.1 (c)(MARKING)	-	0	Repeated Clause.
6.1 (d)(MARKING)	-	0	Repeated Clause.
6.1 (e)(MARKING)	-	0	Repeated Clause.
6.2(MARKING)	-	0	Repeated Clause.
4.2.2(Sewing of Slings)	-	0	Repeated Clause.

15 May, 2027

-
Included w.e.f 28.07.2025

IS 8058 (2018)

Pyridine - Specification (First Revision)

Grade 1, Grade 2 and Grade 3

16200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.4 - Table 1 - Sl No - xi(Colour, HU (Pt-Co scale) - IS 8768)	-	1000	-
4.4 - Table 1 - Sl No - x(Moisture content - Annex L)	-	1000	-
4.4 - Table 1 - Sl No - ix(Sulphates (as SO4) - Annex K)	-	1000	-
4.4 - Table 1 - Sl No - viii(Oxidizable substances - Annex J)	-	1000	-
4.4 - Table 1 - Sl No - vii(Copper (as Cu) - Annex H)	-	1000	-
4.4 - Table 1 - Sl No - vi(Chlorides (as Cl) - Annex G)	-	1000	-
4.4 - Table 1 - Sl No - v(Ammonium compounds (as NH4) - Annex E)	-	1000	-
4.4 - Table 1 - Sl No - iv(Residue on evaporation - Annex D)	-	1000	-
4.4 - Table 1 - Sl No - iii(Boiling range at 760 mm Hg - Annex C)	-	1000	-
4.4 - Table 1 - Sl No - ii(Pyridine content - Annex B)	-	3000	-
4.4 - Table 1 - Sl No - i(Relative density at 250C/250C - Annex A)	-	1000	-
4.3(Identity and Purity - (Annex B))	-	3000	-
4.2(Solubility)	-	0	-
4.1(Description)	-	200	-

15 May, 2027

-
Included w.e.f. 28.07.2025

IS 14708 (1999)

Ethyl acrylate - Specification

19500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Packing)	-	250	-
4.2(Marking)	-	250	-
3.0- Table -1, Sl no. 1(Assay, percent by mass, Annex A)	-	5500	-
3.0- Table -1, Sl no. 2(Acidity (as acrylic acid), percent by mass, Annex B)	-	3000	-
3.0- Table -1, Sl no. 3(Colour, Pt-Co scale, IS 8768)	-	3000	-
3.0- Table -1, Sl no. 4(Water, percent by mass, IS 2362)	-	3000	-
3.0- Table -1, Sl no. 5(Inhibitors (as methyl etherhydroquinone), ppm, Annex C)	-	4500	-

15 May, 2027

-
Included w.e.f 28.07.2025

IS 11557 (1986)

Specification for 2 - Naphthylamine - 3 : 6 : 8 - Trisulphonic acid, technical

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(Description)	-	1000	-
2.2-Table 1-(i)(Matter insoluble in dilute sodium carbonate)	-	3000	-
2.2-Table 1-(ii)(Assay ( on dry basis ), percent by mass)	-	3000	-
2.2-Table 1-(iii)(Amide G. acid, percent by masss)	-	3500	-
3.1(Packing)	-	1000	-
3.2(Marking)	-	500	-

15 May, 2027

-
Included w.e.f. 28.07.2025

IS 17988 (2022)

CHLORINATED POLYVINYL CHLORIDE CPVC RESIN SPECIFICATION

Grade 1,Grade 2 and Grade 3

25500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Grades)	-	500	-
5.1(Basic Resin)	-	2000	-
5.2 Table - 1 (i)(K Value for PVC resin, Min)	-	2000	-
5.2 Table - 1 (ii)(Inherent Viscosity, Min)	-	2000	-
5.2 Table - 1 (iii)(Sieve Analysis, material retained on 250- micron sieve, percent by weight, Max)	-	1500	-
5.2 Table - 1 (iv)(Average Particle Size, micron)	-	1500	-
5.2 Table - 1 (v)(Apparent density, g/ml)	-	1500	-
5.2 Table - 1 (vi)(Dry Flow of 140 g, sec, Max)	-	1000	-
5.2 Table - 1 (vii)(Volatile Matter, percent, Max)	-	1000	-
5.2 Table - 1 (viii)(Chlorine Content, percent, Min)	-	3000	-
5.2 Table - 1 (ix)(RVCM Content, ppm, Max)	-	4500	-
5.2 Table - 1 (x)(Foreign Matter, Max)	-	1000	-
6(SPECIAL REQUIREMENTS OF POLYMER USED FOR MOULDING)	-	3750	-
7(Packing and Marking)	-	250	-

15 May, 2027

-
Included w.e.f. 28.07.2025

IS 2932 (2013)

Enamel, synthetic, exterior: (a) Undercoating (b) Finishing - Specification (Fourth Revision)

23500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.3(Freedom from Coarse Particles)	-	1200	-
6.4(Skin Formation)	-	1200	-
6.5(Thinning Properties)	-	1200	-
6.6(Application Properties)	-	1200	-
6.8(Lead Restriction)	-	1700	-
6.9 Table 2 (1) a. Consistency ( Undercoating and Finishing ) )	-	1200	-
6.9 Table 2 (1) b. Viscosity by ford 80-120 s )	-	1200	-
6.9 Table 2 ( 2) Mass, ( Under coating ) )	-	1200	-
6.9 Table 2 ( 2) Mass, (Finishing ) )	-	1200	-
6.9 Table 2 (3) Drying time, a) Surface dry, ( Under coating ) )	-	1200	-
6.9 Table 2 (3) Drying time, a) Surface dry, ( Finishing ) )	-	1200	-
6.9 Table 2 (b) Hard dry ( Under coating ) )	-	1200	-
6.9 Table 2 (b) Hard dry, (Finishing ) )	-	1200	-
6.9 Table 2 (c) Tack free ( Under coating (Finishing ) )	-	1200	-
6.9 Table 2 (4) a) Finish (Under coating ) )	-	1200	-
6.9 Table 2 (4) a) Finish (Finishing) )	-	1200	-
6.9 Table 2 (b) ) Gloss 60º (Under coating ) )	-	1200	-
6.9 Table 2 (b) ) Gloss 60º (Finishing) )	-	1200	-
6.9 Table 2 (5) Fineness of grind,(Under coating ))	-	1200	-
6.9 Table 2 (5) Fineness of grind,(Finishing))	-	1200	-
6.9 Table 2 (6) Colour , (Finishing))	-	1200	-
6.9 Table 2 (7) Flexibility and adhesion: a) Scratch hardness No such scratch as to show the bare metal after Clause 3 of — (Load 1 000 g) ( Under coating & Finishing ) )	-	1200	-
6.9 Table 2 (b) Bend test (with 6.25 mm 48 h of air in type 1 apparatus) ( Under coating & Finishing ) )	-	1200	-
6.9 Table 2 (8) Flash point ( Under coating & Finishing ) )	-	1200	-
6.9 Table 2 (9) Composition: a) Volume solids ( Under coating ))	-	3000	-
6.9 Table 2 (9) Composition: a) Volume solids ( Finishing))	-	3000	-
6.9 Table 2 (9) Composition:b) Phthalic anhydride content of non-volatile vehicle ( Under coating & Finishing ))	-	3000	-
6.9 Table 2 (10) Resistance to acid ( Under coating & Finishing ))	-	1200	-
6.9 Table 2 (11) Resistance to alkali ( Under coating & Finishing ))	-	1200	-
6.9 Table 2 (12) Accelerated storage stability test ( Under coating & Finishing ))	-	1200	-
6.9 Table 2 (13) Keeping properties ( Under coating & Finishing ))	-	2000	-
6.9 Table 2 (14) Wet opacity ( Under coating & Finishing ))	-	1200	-
6.3(Freedom from Coarse Particles)	-	0	Repeated Clause.
6.4(Skin Formation)	-	0	Repeated Clause.
6.5(Thinning Properties)	-	0	Repeated Clause.
6.6(Application Properties)	-	0	Repeated Clause.
6.8(Lead Restriction)	-	0	Repeated Clause.
6.9 Table 2 (1) a. Consistency ( Undercoating and Finishing ) )	-	0	Repeated Clause.
6.9 Table 2 (1) b. Viscosity by ford 80-120 s )	-	0	Repeated Clause.
6.9 Table 2 ( 2) Mass, ( Under coating ) )	-	0	Repeated Clause.
6.9 Table 2 ( 2) Mass, (Finishing ) )	-	0	Repeated Clause.
6.9 Table 2 (3) Drying time, a) Surface dry, ( Under coating ) )	-	0	Repeated Clause.
6.9 Table 2 (3) Drying time, a) Surface dry, ( Finishing ) )	-	0	Repeated Clause.
6.9 Table 2 (b) Hard dry ( Under coating ) )	-	0	Repeated Clause.
6.9 Table 2 (b) Hard dry, (Finishing ) )	-	0	Repeated Clause.
6.9 Table 2 (c) Tack free ( Under coating (Finishing ) )	-	0	Repeated Clause.
6.9 Table 2 (4) a) Finish (Under coating ) )	-	0	Repeated Clause.
6.9 Table 2 (4) a) Finish (Finishing) )	-	0	Repeated Clause.
6.9 Table 2 (b) ) Gloss 60º (Under coating ) )	-	0	Repeated Clause.
6.9 Table 2 (b) ) Gloss 60º (Finishing) )	-	0	Repeated Clause.
6.9 Table 2 (5) Fineness of grind,(Under coating ))	-	0	Repeated Clause.
6.9 Table 2 (5) Fineness of grind,(Finishing))	-	0	Repeated Clause.
6.9 Table 2 (6) Colour , (Finishing))	-	0	Repeated Clause.
6.9 Table 2 (7) Flexibility and adhesion: a) Scratch hardness No such scratch as to show the bare metal after Clause 3 of — (Load 1 000 g) ( Under coating & Finishing ) )	-	0	Repeated Clause.
6.9 Table 2 (b) Bend test (with 6.25 mm 48 h of air in type 1 apparatus) ( Under coating & Finishing ) )	-	0	Repeated Clause.
6.9 Table 2 (8) Flash point ( Under coating & Finishing ) )	-	0	Repeated Clause.
6.9 Table 2 (9) Composition: a) Volume solids ( Under coating ))	-	0	Repeated Clause.
6.9 Table 2 (9) Composition: a) Volume solids ( Finishing))	-	0	Repeated Clause.
6.9 Table 2 (9) Composition:b) Phthalic anhydride content of non-volatile vehicle ( Under coating & Finishing ))	-	0	Repeated Clause.
6.9 Table 2 (10) Resistance to acid ( Under coating & Finishing ))	-	0	Repeated Clause.
6.9 Table 2 (11) Resistance to alkali ( Under coating & Finishing ))	-	0	Repeated Clause.
6.9 Table 2 (12) Accelerated storage stability test ( Under coating & Finishing ))	-	0	Repeated Clause.
6.9 Table 2 (13) Keeping properties ( Under coating & Finishing ))	-	0	Repeated Clause.
6.9 Table 2 (14) Wet opacity ( Under coating & Finishing ))	-	0	Repeated Clause.
6.7.1.3(QUV apparatus)	-	8000	-
6.2(Condition in container)	-	0	Repeated Clause.
7.2(Marking)	-	250	Repeated Clause.
7.3(BIS Certification Marking)	-	250	0
6.1.1(General- Rosin test)	-	500	-
6.1.2(Total Non-Volatile Content)	-	500	-
6.7.2(Bulk supply)	-	2000	-
6.7.2.1(Bulk supply-Gloss (specular 60º) retention)	-	0	complete Test price for cl. 6.7.2 is 2000/-.
6.7.2.2(Bulk supply- Film characteristics- Colour)	-	0	complete Test price for cl. 6.7.2 is 2000/-.
6.7.2.2(Bulk supply- Film characteristics- Colour)	-	0	complete Test price for cl. 6.7.2 is 2000/-.
6.7.2.2(Bulk supply- Film characteristics-Freedom from Checking)	-	0	complete Test price for cl. 6.7.2 is 2000/-.
6.7.2.2(Bulk supply- Film characteristics-Freedom from Cracking)	-	0	complete Test price for cl. 6.7.2 is 2000/-.
6.7.2.2(Bulk supply- Film characteristics-Freedom from Flaking)	-	0	complete Test price for cl. 6.7.2 is 2000/-.
6.7.2.2(Bulk supply- Film characteristics-Freedom from Chalking)	-	0	complete Test price for cl. 6.7.2 is 2000/-.
6.7.2.2(Bulk supply- Film characteristics-Freedom from Spotting)	-	0	complete Test price for cl. 6.7.2 is 2000/-.
6.7.2.2(Bulk supply- Film characteristics-Freedom from Blisters and Corrosion)	-	0	complete Test price for cl. 6.7.2 is 2000/-.
6.7.2.2(Bulk supply- Film characteristics-Protection against corrosion)	-	0	complete Test price for cl. 6.7.2 is 2000/-.
" 6.9 Table 2, xiii) Keeping properties "("Keeping properties 1. Visual observation (Corrosion and odour of putrefaction, rancidity or souring) [Cl 3.1 of IS 101 (Part 6/Sec 2)]")	-	0	Repeated Clause.
" 6.9 Table 2, xiii) Keeping properties "("Keeping properties 2. Change in skinning [Cl.3.1,Table 1 of IS 101 (Part 6/Sec 2)]")	-	0	Repeated Clause.
" 6.9 Table 2, xiii) Keeping properties "("Keeping properties 3. Degree of settling [Cl.3.2,Table 2 of IS 101 (Part 6/Sec 2)]")	-	0	Repeated Clause.
" 6.9 Table 2, xiii) Keeping properties "("Keeping properties 4. Observation of dried film [Cl.3.4, Table 1 of IS 101 (Part 6/Sec 2)]")	-	0	Repeated Clause.
" 6.9 Table 2, xiii) Keeping properties "("Keeping properties 5. Loss of mass resulting from Storage [Cl.3.5 of IS 101 (Part 6/Sec 2)]")	-	0	Repeated Clause.
6.7.1.3(QUV apparatus)	-	0	-
6.2(Condition in container)	-	0	-
7.2(Marking)	-	0	-
7.3(BIS Certification Marking)	-	0	-
6.1.1(General- Rosin test)	-	0	-
6.1.2(Total Non-Volatile Content)	-	0	-
6.7.2(Bulk supply)	-	0	-
6.7.2.1(Bulk supply-Gloss (specular 60º) retention)	-	0	-
6.7.2.2(Bulk supply- Film characteristics- Colour)	-	0	-
6.7.2.2(Bulk supply- Film characteristics- Colour)	-	0	-
6.7.2.2(Bulk supply- Film characteristics-Freedom from Checking)	-	0	-
6.7.2.2(Bulk supply- Film characteristics-Freedom from Cracking)	-	0	-
6.7.2.2(Bulk supply- Film characteristics-Freedom from Flaking)	-	0	-
6.7.2.2(Bulk supply- Film characteristics-Freedom from Chalking)	-	0	-
6.7.2.2(Bulk supply- Film characteristics-Freedom from Spotting)	-	0	-
6.7.2.2(Bulk supply- Film characteristics-Freedom from Blisters and Corrosion)	-	0	-
6.7.2.2(Bulk supply- Film characteristics-Protection against corrosion)	-	0	-
" 6.9 Table 2, xiii) Keeping properties "("Keeping properties 1. Visual observation (Corrosion and odour of putrefaction, rancidity or souring) [Cl 3.1 of IS 101 (Part 6/Sec 2)]")	-	0	-
" 6.9 Table 2, xiii) Keeping properties "("Keeping properties 2. Change in skinning [Cl.3.1,Table 1 of IS 101 (Part 6/Sec 2)]")	-	0	-
" 6.9 Table 2, xiii) Keeping properties "("Keeping properties 3. Degree of settling [Cl.3.2,Table 2 of IS 101 (Part 6/Sec 2)]")	-	0	-
" 6.9 Table 2, xiii) Keeping properties "("Keeping properties 4. Observation of dried film [Cl.3.4, Table 1 of IS 101 (Part 6/Sec 2)]")	-	0	-
" 6.9 Table 2, xiii) Keeping properties "("Keeping properties 5. Loss of mass resulting from Storage [Cl.3.5 of IS 101 (Part 6/Sec 2)]")	-	0	-

15 May, 2027

-
Included w.e.f. 07.08.2025

IS 3521 : Part 5 (2021)

Personal Fall Arrest Systems Specification Part 5 Connectors with self-closing and self-locking gates

28000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No. 4.1(General requirement)	-	2000	-
Clause No. 4.2.1(" Gate-face resistance ")	-	5000	-
Clause No. 4.2.2(" Gate side-load resistance ")	-	5000	-
Clause No. 4.3("Static strength ")	-	8000	-
Clause No. 4.4(" Corrosion resistance ")	-	7000	-
Clause No. 6.2(Marking)	-	1000	-
Clause No. 6.3(Packaging)	-	1000	-
Clause No. 4.1(General requirement)	-	0	-
Clause No. 4.2.1(" Gate-face resistance ")	-	0	-
Clause No. 4.2.2(" Gate side-load resistance ")	-	0	-
Clause No. 4.3("Static strength ")	-	0	-
Clause No. 4.4(" Corrosion resistance ")	-	0	-
Clause No. 6.2(Marking)	-	0	-
Clause No. 6.3(Packaging)	-	0	-

15 May, 2027

-
Included w.e.f 28.07.2025

IS 12069 (2023)

Coconut Fatty Acids - Specification (first revision of IS 12069)

Grade-1 and Grade-2

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Description)	-	250	-
4.2(Description)	-	250	-
4.3 Table 1 (i)(Moisture)	-	500	-
4.3 Table 1 (ii)(Saponification value)	-	1000	-
4.3 Table 1 (iii)(Acid value differ from Saponification value)	-	1000	-
4.3 Table 1 (iv)(Iodine value)	-	1500	-
4.3 Table 1 (v)(Mineral acidity)	-	1000	-
4.3 Table 1 (vi)(Ash,)	-	500	-
4.3 Table 1 (vii)(Unsaponifiable matter)	-	1000	-
4.3 Table 1 (viii)(Titre,)	-	1500	-
4.3 Table 1 (ix)(Flash point)	-	1000	-
4.4 Table 2 (i)(C6 : 0)	-	5000	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4 Table 2 (ii)(C8 : 0)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4 Table 2 (iii)(C10 : 0)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4 Table 2 (iv)(C12 : 0)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4Table 2 (v)(C14 : 0)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4Table 2 (vi)(C16 : 0)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4Table 2 (vii)(C16 :1)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4Table 2 (viii)(C17 : 0)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4Table 2 (ix)(C17 : 1)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4Table 2 (x)(C18 : 0)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4Table 2 (xi)(C18 : 1)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4Table 2 (xii)(C18 : 2)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4Table 2 (xiii)(C18 : 3)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4Table 2 (xiv)(C20 : 0)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4Table 2 (xv)(C20 : 1)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4Table 2 (xvi)(C20 : 2)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4Table 2 (xvii)(C22 : 0)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4Table 2 (xviii)(C22 : 1)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4Table 2 (xix)(C22 : 2)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4Table 2 (xx)(C24 : 0)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4Table 2 (xxi)(C24 : 1)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.3 Table 1 (ix)(Colour,)	-	500	-

15 May, 2027

-
Included w.e.f.23.07.2025

IS 12068 (1987)

Specification for rice bran fatty acids

12300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1/3.1.1/3.2(Description - IS 12068:1987)	-	500	-
3.3, 6.1 Table 1 (i)(Moisture - IS 548 (Part 1/Sec 2) : 2021)	-	1000	-
3.3, 6.1 Table 1 (ii)(Saponification - IS 548 (Part 1/Sec 2) : 2021)	-	1300	-
3.3, 6.1 Table 1 (iii)(Acid value - IS 548 (Part 1/Sec 2) : 2021)	-	1000	-
3.3, 6.1 Table 1 (iv)(Iodine Value - IS 548 (Part 1/Sec 2) : 2021)	-	2500	-
3.3, 6.1 Table 1 (v)(Mineral Acidity - IS 12068:1987)	-	1000	-
3.3, 6.1 Table 1 (vi)(Ash - IS 12068:1987)	-	500	-
3.3, 6.1 Table 1 (vii)(Unsaponifiable matter - IS 548 (Part 1/Sec 2) : 2021)	-	1000	-
3.3, 6.1 Table 1 (viii)(Titre - IS 548 (Part 1/Sec 2) : 2021)	-	2000	-
3.3, 6.1 Table 1 (ix)(Colour)	-	500	-
3.3, 6.1 Table 1 (x)(Flash Point - IS 1448 (P-21))	-	1000	-

15 May, 2027

-
Included w.e.f.23.07.2025

IS 12067 (2023)

Palm fatty acids - Specification (first revision of IS 12067)

All Grades

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1&4.2(Description)	-	800	-
Cl.4.3 (i)(Moisture - 6 of IS 548 (Part 1/Sec 2))	-	1200	-
Cl. 4.3 (ii)(Saponification Value - 16 of IS 548 (Part 1/Sec 2))	-	1500	-
Cl. 4.3 (iii)(Acid Value - 8 of IS 548 (Part 1/Sec 2))	-	1000	-
Cl. 4.3 (iv)(Iodine Value - 15 of IS 548 (Part 1/Sec 2))	-	1500	-
Cl. 4.3 (v)(Mineral Acidity - ANNEX A2 of IS 12067:2023)	-	1200	-
Cl. 4.3 (vi)(Ash - ANNEX A1 of IS 12067:2023)	-	800	-
Cl. 4.3 (vii)(Unsaponifiable matter - 9 of IS 548 (Part 1/ Sec 2))	-	1500	-
Cl. 4.3 (viii)(Titre Test - 13 of IS 548 (Part 1/Sec 2))	-	1500	-
Cl. 4.3 (ix)(Colour - 14.1 of IS 548 (Part 1/Sec 2))	-	2000	-
Cl. 4.3 (x)(Flash point - IS 1448 (Part 21))	-	2000	-
Cl. 4.4(Fatty Acid Composition of Palm Fatty Acids)	-	0	-
4.1(Description - IS 12067:2023)	-	0	-
4.2(Description - IS 12067:2023)	-	0	-
4.3, Table 1 (i)(Moisture - IS 548 (Part 1/Sec 2) : 2021)	-	0	-
4.3, Table 1 (ii)(Saponification - IS 548 (Part 1/Sec 2) : 2021)	-	0	-
4.3, Table 1 (iii)(Acid value shall not differ from saponification value - IS 548 (Part 1/Sec 2) : 2021)	-	0	-
4.3, Table 1 (iv)(Iodine Value - IS 548 (Part 1/Sec 2) : 2021)	-	0	-
4.3, Table 1 (v)(Mineral Acidity - IS 12067:1987)	-	0	-
4.3, Table 1 (vi)(Ash - IS 12067:1987)	-	0	-
4.3, Table 1 (vii)(Unsaponifiable matter - IS 548 (Part 1/Sec 2) : 2021)	-	0	-
4.3, Table 1 (viii)(Titre - IS 548 (Part 1/Sec 2) : 2021)	-	0	-
4.3, Table 1 (ix)(Colour, 1-inch cell, Y +5R)	-	0	-
4.3, Table 1 (x)(Flash Point - IS 1448 (P-21))	-	0	-
4.4, Table 2 (i)(C6 : 0)	-	0	-
4.4, Table 2 (ii)(C8 : 0)	-	0	-
4.4, Table 2 (iii)(C10 : 0)	-	0	`
4.4, Table 2 (iv)(C12 : 0)	-	0	-
4.4, Table 2 (v)(C14 : 0)	-	0	-
4.4, Table 2 (vi)(C16 : 0)	-	0	-
4.4, Table 2 (vii)(C16 :1)	-	0	-
4.4, Table 2 (viii)(C17 : 0)	-	0	-
4.4, Table 2 (ix)(C17 : 1)	-	0	-
4.4, Table 2 (x)(C18 : 0)	-	0	-
4.4, Table 2 (xi)(C18 : 1)	-	0	-
4.4, Table 2 (xii)(C18 : 2)	-	0	-
4.4, Table 2 (xiii)(C18 : 3)	-	0	-
4.4, Table 2 (xiv)(C20 : 0)	-	0	-
4.4, Table 2 (xv)(C20 : 1)	-	0	`
4.4, Table 2 (xvi)(C20 : 2)	-	0	-
4.4, Table 2 (xvii)(C22 : 0)	-	0	-
4.4, Table 2 (xviii)(C22 : 1)	-	0	-
4.4, Table 2 (xix)(C22 : 2)	-	0	-
4.4, Table 2 (xx)(C24 : 0)	-	0	-
4.4, Table 2 (xxi)(C24 : 1)	-	0	-

15 May, 2027

-
Included w.e.f.23.07.2025

IS 13601 (1993)

Ethylene vinyl acetate (Eva) copolymers for its safe use in contact with foodstuffs, pharmaceuticals and drinking water - Specification

24500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(Vinyl Acetate (VA) Content,% of Annex B)	-	3000	-
4.1.2(Additive Concentrate,%)	-	3000	-
4.2(Material,% of IS 13349)	-	7000	-
4.3(Pigments and Colourants of IS 9833)	-	7000	-
4.4(Overall Migration of IS 9845)	-	4000	-
4.1.1(Vinyl Acetate (VA) Content,% of Annex B)	-	0	-
4.1.2(Additive Concentrate,%)	-	0	-
4.2(Material,% of IS 13349)	-	0	-
4.3(Pigments and Colourants of IS 9833)	-	0	-
4.4(Overall Migration of IS 9845)	-	0	-
4.1.1(Vinyl Acetate (VA) Content)	-	0	-
4.1.2(Additive Concentrates)	-	0	-
4.2(Material)	-	0	-
4.3(Pigments and Colourants)	-	0	-
4.4(Overall Migration)	-	0	-
4.5(Storage and Control)	-	250	-
5(Packing and Marking)	-	250	-

15 May, 2027

-
-

IS 17442 (2020)

Vinyl Chloride Monomer ” Specification

18500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 3.1,Table-1,Sl no.1(Appearance and colour, Annex- A)	-	2000	-
Clause 3.1,Table-1,Sl no.2(Water content in ppm, Annex-B/IS 2362/ASTM E203)	-	2500	-
Clause 3.1,Table-1,Sl no.3(Acidity by mass in ppm, Annex-C)	-	4000	-
Clause 3.1,Table-1,Sl no.3(Acidity by mass in ppm, Annex-C)	-	0	-
Clause 3.1,Table-1,Sl no.4(Non-volatile matter in ppm, Annex-D)	-	2000	-
Clause 3.1,Table-1,Sl no.5(Total iron by mass in ppm, Annex-E)	-	3000	-
Clause 3.1,Table-1,Sl no.6(Purity, percent in mass, Annex-F/ASTM D5507)	-	4000	-
Clause 3.1,Table-1,Sl no.1(Appearance and colour, Annex- A)	-	0	-
Clause 3.1,Table-1,Sl no.2(Water content in ppm, Annex-B/IS 2362/ASTM E203)	-	0	-
Clause 3.1,Table-1,Sl no.3(Acidity by mass in ppm, Annex-C)	-	0	-
Clause 3.1,Table-1,Sl no.4(Non-volatile matter in ppm, Annex-D)	-	0	-
Clause 3.1,Table-1,Sl no.5(Total iron by mass in ppm, Annex-E)	-	0	-
Clause 3.1,Table-1,Sl no.6(Purity, percent in mass, Annex-F/ASTM D5507)	-	0	-
3.1-Table 1-(i)(Appearance and colour)	-	0	-
3.1-Table 1-(ii)(Water content in ppm, Max)	-	0	-
3.1-Table 1-(iii)(Acidity by mass in ppm, Max)	-	0	-
3.1-Table 1-(iv)(Non-volatile matter in ppm, Max)	-	0	-
3.1-Table 1-(v)(Total iron by mass in ppm, Max)	-	0	-
3.1-Table 1-(vi)(Purity, percent in mass, Min)	-	0	-
3.2(Quality of Reagents)	-	500	-
4(Packing and Marking)	-	500	-
Clause 3.1,Table-1,Sl no.1(Appearance and colour, Annex- A)	-	0	-
Clause 3.1,Table-1,Sl no.2(Water content in ppm, Annex-B/IS 2362/ASTM E203)	-	0	-
Clause 3.1,Table-1,Sl no.3(Acidity by mass in ppm, Annex-C)	-	0	-
Clause 3.1,Table-1,Sl no.3(Acidity by mass in ppm, Annex-C)	-	0	-
Clause 3.1,Table-1,Sl no.4(Non-volatile matter in ppm, Annex-D)	-	0	-
Clause 3.1,Table-1,Sl no.5(Total iron by mass in ppm, Annex-E)	-	0	-
Clause 3.1,Table-1,Sl no.6(Purity, percent in mass, Annex-F/ASTM D5507)	-	0	-
Clause 3.1,Table-1,Sl no.1(Appearance and colour, Annex- A)	-	0	-
Clause 3.1,Table-1,Sl no.2(Water content in ppm, Annex-B/IS 2362/ASTM E203)	-	0	-
Clause 3.1,Table-1,Sl no.3(Acidity by mass in ppm, Annex-C)	-	0	-
Clause 3.1,Table-1,Sl no.4(Non-volatile matter in ppm, Annex-D)	-	0	-
Clause 3.1,Table-1,Sl no.5(Total iron by mass in ppm, Annex-E)	-	0	-
Clause 3.1,Table-1,Sl no.6(Purity, percent in mass, Annex-F/ASTM D5507)	-	0	-
3.1-Table 1-(i)(Appearance and colour)	-	0	-
3.1-Table 1-(ii)(Water content in ppm, Max)	-	0	-
3.1-Table 1-(iii)(Acidity by mass in ppm, Max)	-	0	-
3.1-Table 1-(iv)(Non-volatile matter in ppm, Max)	-	0	-
3.1-Table 1-(v)(Total iron by mass in ppm, Max)	-	0	-
3.1-Table 1-(vi)(Purity, percent in mass, Min)	-	0	-
3.2(Quality of Reagents)	-	0	-
4(Packing and Marking)	-	0	-
Clause 3.1,Table-1,Sl no.1(Appearance and colour, Annex- A)	-	0	-
Clause 3.1,Table-1,Sl no.2(Water content in ppm, Annex-B/IS 2362/ASTM E203)	-	0	-
Clause 3.1,Table-1,Sl no.3(Acidity by mass in ppm, Annex-C)	-	0	-
Clause 3.1,Table-1,Sl no.3(Acidity by mass in ppm, Annex-C)	-	0	-
Clause 3.1,Table-1,Sl no.4(Non-volatile matter in ppm, Annex-D)	-	0	-
Clause 3.1,Table-1,Sl no.5(Total iron by mass in ppm, Annex-E)	-	0	-
Clause 3.1,Table-1,Sl no.6(Purity, percent in mass, Annex-F/ASTM D5507)	-	0	-
Clause 3.1,Table-1,Sl no.1(Appearance and colour, Annex- A)	-	0	-
Clause 3.1,Table-1,Sl no.2(Water content in ppm, Annex-B/IS 2362/ASTM E203)	-	0	-
Clause 3.1,Table-1,Sl no.3(Acidity by mass in ppm, Annex-C)	-	0	-
Clause 3.1,Table-1,Sl no.4(Non-volatile matter in ppm, Annex-D)	-	0	-
Clause 3.1,Table-1,Sl no.5(Total iron by mass in ppm, Annex-E)	-	0	-
Clause 3.1,Table-1,Sl no.6(Purity, percent in mass, Annex-F/ASTM D5507)	-	0	-
3.1-Table 1-(i)(Appearance and colour)	-	0	-
3.1-Table 1-(ii)(Water content in ppm, Max)	-	0	-
3.1-Table 1-(iii)(Acidity by mass in ppm, Max)	-	0	-
3.1-Table 1-(iv)(Non-volatile matter in ppm, Max)	-	0	-
3.1-Table 1-(v)(Total iron by mass in ppm, Max)	-	0	-
3.1-Table 1-(vi)(Purity, percent in mass, Min)	-	0	-
3.2(Quality of Reagents)	-	0	-
4(Packing and Marking)	-	0	-

15 May, 2027

-
Included w.e.f.23.07.2025

IS 3521 : Part 1 (2021)

Personal Fall Arrest Systems Specification Part 1 Full Body Harness Fourth Revision

44500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3.2.1(Breaking strength of Synthetic fibre)	-	500	-
4.3.2.1(Breaking strength of webbing)	-	3000	-
4.3.2.2(Width of the webbing)	-	500	-
4.3.2.3(No of stitches per cm)	-	500	-
4.3.2.4(Flammability)	-	4000	-
4.4(Thickness of metal plating)	-	500	-
4.4(Corrosion resistance)	-	5000	-
4.5(Buckle Uncoupling and Slippage)	-	500	-
4.6(Static Strength)	-	4000	-
4.7(Dynamic Performance)	-	6000	-
4.9(Static Suspension Angle Test for Class AE FBH)	-	3000	-
4.8(Static Suspension Test)	-	3000	-
4.9(Static Suspension Angle Test for Class AE FBH)	-	0	-
5.2(Corrosion Test)	-	0	-
5.3(Buckle Shake Test)	-	500	-
5.8(Static Suspension Test for Fall-arrest Attachment Elements)	-	3000	-
5.9(Static suspension Angle Test for Class AE FBH)	-	0	-
5.10(Flammability Resistance Test)	-	0	-
5.7(Dynamic Performance Tests)	-	0	-
5.4(Static Strength Test for Fall-arrest Attachment Elements)	-	3000	-
5.5(Static Strength Test for Controlled-descent Attachment Elements)	-	3000	-
5.6(Static Strength Test for Confined-space Access Attachment Elements)	-	0	-
4.1(General)	-	3000	-
4.2(Classification)	-	500	-
4.3(Design and Construction)	-	500	-
4.4(Corrosion Resistance)	-	0	-
4.5(Buckle Uncoupling and slippage)	-	0	-
4.5(Buckle Uncoupling and slippage)	-	0	-
4.6(Static Strength)	-	0	-
4.7(Dynamic Performance)	-	0	-
4.8(Static Suspension Test)	-	0	-
4.9(Static Suspension Angle test)	-	0	-
5.1.1(Torso test mass for the Static test)	-	0	-
5.1.2(Torso test mass for the Static test)	-	0	-
5.1.3(Test Layard)	-	0	-
5.1.4(Test Structure)	-	0	-
5.1.5(Static strength test apparatus)	-	0	-
5.1.6(Quick-release Device)	-	0	-
5.1.7(Test Yoke)	-	0	-
5.1.8(Force-measuring instrumentation)	-	0	-
5.2(Force-measuring instrumentation)	-	0	-
5.2(Corrosion Test)	-	0	-
5.3(Buckle Shake Test)	-	0	-
5.4(Static strength test for fall-arrest attachment elements)	-	0	-
5.5(Static strength test for controlled-descent attachment elements)	-	0	-
5.6(Static strength test for confined- space access attachment elements)	-	0	-
5.7(Dynamic Performance Test)	-	0	-
5.8(Static Suspension test for fall-arrest attachment elements)	-	0	-
5.9(Static suspension angle test)	-	0	-
5.10(Flammability Resistance Test)	-	0	-
6.2(Marking)	-	500	-

15 May, 2027

-
Included w.e.f.23.07.2025

IS 869 (2020)

Specification for Ethylene Dichloride ( Third Revision )

Industrial Chemical-Ethylene Dichloride

24500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Description)	-	500	-
3.1.1(Solubility)	-	500	-
4.1()	-	500	-
4.2(Marking)	-	500	-
3.2 Table -1, Sl no. 1(Relative density at 15°C/15°C, Annex A2)	-	2000	-
3.2 Table -1, Sl no. 2(1,2 Dichloroethane (EDC), weight percent, ASTM D 6806)	-	8500	-
3.2 Table -1, Sl no. 3(Residue on evaporation, percent by mass, Annex A3)	-	3000	-
3.2 Table -1, Sl no. 4(Acidity (as HCl), percent by mass, Annex A4)	-	3000	-
3.2 Table -1, Sl no. 5(Colour, Annex A6)	-	3000	-
3.2 Table -1, Sl no. 6(Moisture content, percent by mass, Annex A5)	-	3000	-
3.1(Description)	-	0	-
3.1.1(Solubility)	-	0	-
4.1()	-	0	-
4.2(Marking)	-	0	-
3.2 Table -1, Sl no. 1(Relative density at 15°C/15°C, Annex A2)	-	0	-
3.2 Table -1, Sl no. 2(1,2 Dichloroethane (EDC), weight percent, ASTM D 6806)	-	0	-
3.2 Table -1, Sl no. 3(Residue on evaporation, percent by mass, Annex A3)	-	0	-
3.2 Table -1, Sl no. 4(Acidity (as HCl), percent by mass, Annex A4)	-	0	-
3.2 Table -1, Sl no. 5(Colour, Annex A6)	-	0	-
3.2 Table -1, Sl no. 6(Moisture content, percent by mass, Annex A5)	-	0	-

15 May, 2027

-
Included w.e.f 30.06.2025

IS 12029 (2023)

Acid Oil - Specification (first revision of IS 12029)

Industrial Fine chemical-Acid Oil

13800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Iodine Value)	-	800	-
4.2 Table 1 (i)(Total Fatty Matter (TFM) - IS 286 : 2018)	-	2000	-
4.2 Table 1 (ii)(Moisture and volatile matter - IS 286 : 2018)	-	2000	-
4.2 Table 1 (iii)(Free fatty Acid - IS 548 (Part 1/Sec 2) : 2021)	-	2000	-
4.2 Table 1 (iv)(Free Mineral Acid ( As H₂SO₄) - IS 12029:2023)	-	1000	-
4.2 Table 1 (v)(Unsaponifiable matter - IS 548 (Part 1/Sec 2) : 2021)	-	1000	-
4.2 Table 1 (vi)(Oxidized Fatty Acid - IS 12029:2023)	-	2000	-
4.2 Table 1 (vii)(Iron - IS 12029:2023)	-	2000	-
4.2 Table 1 (viii)(Ash - IS 12029:2023)	-	1000	-
4.1(Iodine Value)	-	0	-
4.2 Table 1 (i)(Total Fatty Matter (TFM) - IS 286 : 2018)	-	0	-
4.2 Table 1 (ii)(Moisture and volatile matter - IS 286 : 2018)	-	0	-
4.2 Table 1 (iii)(Free fatty Acid - IS 548 (Part 1/Sec 2) : 2021)	-	0	-
4.2 Table 1 (iv)(Free Mineral Acid ( As H₂SO₄) - IS 12029:2023)	-	0	-
4.2 Table 1 (v)(Unsaponifiable matter - IS 548 (Part 1/Sec 2) : 2021)	-	0	-
4.2 Table 1 (vi)(Oxidized Fatty Acid - IS 12029:2023)	-	0	-
4.2 Table 1 (vii)(Iron - IS 12029:2023)	-	0	-
4.2 Table 1 (viii)(Ash - IS 12029:2023)	-	0	-

15 May, 2027

-
Included w.e.f 30.06.2025

IS 10931 (2023)

Lauric Acid - Specification (first revision of IS 10931)

All type

15800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Description)	-	300	-
4.2 Table 1 (i)(Moisture)	-	500	-
4.2 Table 1 (ii)(Saponification value)	-	1000	-
4.2 Table 1 (iii)(Acid value differ from Saponification value)	-	1000	-
4.2 Table 1 (iv)(Iodine value)	-	3000	-
4.2 Table 1 (v)(Unsaponifiable matter)	-	2000	-
4.2 Table 1 (vi)(Titre)	-	3000	-
4.2 Table 1 (vii)(Colour, 51/4 inch cell, Y + 5R)	-	1000	-
4.3 Table 2 (i)(C8:0 + C10 : 0)	-	4000	-
4.3 Table 2 (ii)(C12 : 0)	-	0	Combined test price for cl.4.3 is 4000/-.
4.3 Table 2 (i)(C14 : 0 + C16 : 0)	-	0	Combined test price for cl.4.3 is 4000/-.
4.3 Table 3 (i)(C8 : 0 + C10 : 0)	-	0	Combined test price for cl.4.3 is 4000/-.
4.3 Table 3 (ii)(C12 : 0)	-	0	Combined test price for cl.4.3 is 4000/-.
4.3 Table 3 (iii)(C14 : 0)	-	0	Combined test price for cl.4.3 is 4000/-.
4.3 Table 2 (iv)(C16 : 0)	-	0	Combined test price for cl.4.3 is 4000/-.
4.3 Table 2 (v)(Others)	-	0	Combined test price for cl.4.3 is 4000/-.
4.1(Description)	-	0	-
4.2 Table 1 (i)(Moisture)	-	0	-
4.2 Table 1 (ii)(Saponification value)	-	0	-
4.2 Table 1 (iii)(Acid value differ from Saponification value)	-	0	-
4.2 Table 1 (iv)(Iodine value)	-	0	-
4.2 Table 1 (v)(Unsaponifiable matter)	-	0	-
4.2 Table 1 (vi)(Titre)	-	0	-
4.2 Table 1 (vii)(Colour, 51/4 inch cell, Y + 5R)	-	0	-
4.3 Table 2 (i)(C8:0 + C10 : 0)	-	0	-
4.3 Table 2 (ii)(C12 : 0)	-	0	-
4.3 Table 2 (i)(C14 : 0 + C16 : 0)	-	0	-
4.3 Table 3 (i)(C8 : 0 + C10 : 0)	-	0	-
4.3 Table 3 (ii)(C12 : 0)	-	0	-
4.3 Table 3 (iii)(C14 : 0)	-	0	-
4.3 Table 2 (iv)(C16 : 0)	-	0	-
4.3 Table 2 (v)(Others)	-	0	-
4.1(Description)	-	0	-
4.2 Table 1 (i)(Moisture)	-	0	-
4.2 Table 1 (ii)(Saponification value)	-	0	-
4.2 Table 1 (iii)(Acid value differ from Saponification value)	-	0	-
4.2 Table 1 (iv)(Iodine value)	-	0	-
4.2 Table 1 (v)(Unsaponifiable matter)	-	0	-
4.2 Table 1 (vi)(Titre)	-	0	-
4.2 Table 1 (vii)(Colour, 51/4 inch cell, Y + 5R)	-	0	-
4.3 Table 2 (i)(C8:0 + C10 : 0)	-	0	-
4.3 Table 2 (ii)(C12 : 0)	-	0	-
4.3 Table 2 (i)(C14 : 0 + C16 : 0)	-	0	-
4.3 Table 3 (i)(C8 : 0 + C10 : 0)	-	0	-
4.3 Table 3 (ii)(C12 : 0)	-	0	-
4.3 Table 3 (iii)(C14 : 0)	-	0	-
4.3 Table 2 (iv)(C16 : 0)	-	0	-
4.3 Table 2 (v)(Others)	-	0	-

15 May, 2027

-
Included w.e.f 09.07.2025

1
2
3
Next
Last

Bureau of Indian Standards

The National Standards Body of India

Sleen India Biz venture Private Limited, Agra

RAHANKALAN ROAD, PART 295, BLOCK-A KUBERPUR, 300 METER FROM RAILWAY CROSSING CHALESHAR ROAD, Agra, Uttar Pradesh, India, 282006, Agra, Agra, Uttar Pradesh, 282006

8193022228 sleen.info@gmail.com

Scope List