BIS - LIMS (Laboratory Information Management System)

Sleen India Biz venture Private Limited, Agra

RAHANKALAN ROAD, PART 295, BLOCK-A KUBERPUR, 300 METER FROM RAILWAY CROSSING CHALESHAR ROAD, Agra, Uttar Pradesh, India, 282006, Agra, Agra, Uttar Pradesh, 282006

8193022228 sleen.info@gmail.com

Scope List

Reset

227 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

181

IS 3617 (2022)

Textiles Gents pullover knitted Specification Second Revision

13750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Class of Pullover)	-	250	10% Discount for BIS
4.2(Conformity of Yarn)	-	250	10% Discount for BIS
4.3(Conformity of Fabric)	-	250	10% Discount for BIS
4.4(Seams and Stitches)	-	250	10% Discount for BIS
4.5(Pullover – Shape, Welt (or tape), Border, High neck portion, reinforcements, freedom from defects)	-	250	10% Discount for BIS
5.1(Dimension and Tolerance)	-	500	10% Discount for BIS
5.2, Table 2(i) Construction)	-	250	10% Discount for BIS
5.2 Table 2(ii) Dimensional change)	-	500	10% Discount for BIS
5.2 Table 2(iii) Scouring loss)	-	500	10% Discount for BIS
5.2 Table 2(iv) Alkali Solubility)	-	500	10% Discount for BIS
5.2 Table 2(v) pH value of aqueous extract)	-	500	10% Discount for BIS
5.2 Table 2(vi) Minimum colour fastness ratings)	-	2500	10% Discount for BIS
5.2 Table 2(vii) Fibre composition)	-	1000	10% Discount for BIS
5.2 Table 2(viii) Fineness grade of wool (wollen pullover))	-	1000	10% Discount for BIS
6(Marking)	-	250	10% Discount for BIS
7(Packing)	-	250	10% Discount for BIS
4.1(Class of Pullover)	-	250	10% Discount for BIS
4.2(Yarn)	-	250	10% Discount for BIS
4.2.1("Yarn - The hosiery yarn, shall be 100 percent virgin wool, or 100 percent acrylic fibres, or blends of wool with acrylic fibres and/or polyester fibres (or)viscose rayon and polyamide (nylon) fibres")	-	500	10% Discount for BIS
4.3.1(Fabric - Moth Proofing)	-	500	10% Discount for BIS
4.3.2(Fabric - Shrink-proof)	-	500	10% Discount for BIS
4.4(Seams and Stitches)	-	250	10% Discount for BIS
4.4.1(All stitches made from one strand of sewing thread conforming to any one of the appropriate varieties)	-	250	10% Discount for BIS
4.4.2("In case of single colour pullover, same colour threads for stitching, in case of multi-colour pullover threads shall be of the major or ground colour")	-	250	10% Discount for BIS
4.4.3(The number of stitches shall not be less than 4 per cm)	-	250	10% Discount for BIS
4.5.1(Pullover shall be made of one piece with cuffs at sleeves and border at the bottom. welt at the neck shall be attached to the pullover by stitching or linking)	-	250	10% Discount for BIS
4.5.2(The pullover shall be of V-neck, round-reek or high-neck)	-	250	10% Discount for BIS
4.5.3(Welt (or Tape))	-	250	10% Discount for BIS
4.5.4(Border)	-	250	10% Discount for BIS
4.5.5(High Neck Portion)	-	250	10% Discount for BIS
4.5.6("All stitches shall be of even tension throughout with all the loose ends securely fastened. Stitching shall not give way when the pullover is stretched to one and a half times")	-	250	10% Discount for BIS
4.5.7(Freedom from Defects)	-	250	10% Discount for BIS
5.1(REQUIREMENTS - dimensions of the pullover)	-	0	NA
5.2- Table 2 i)(REQUIREMENTS - Construction a) Wales per 5 cm b) Courses per 5 cm)	-	0	NA
5.2- Table 2 ii)(REQUIREMENTS - Dimensional change (due to relaxation) percent)	-	0	NA
5.2- Table 2 iii)(REQUIREMENTS - Scouring loss, percent)	-	0	NA
5.2- Table 2 iv)("REQUIREMENTS - Alkali, solubility, percent, Max (not applicable for 100 percent acrylic) a) Bleached b) Dyed/mixed shade")	-	0	NA
5.2- Table 2 v)("REQUIREMENTS - pH value of aqueous extract a) All wool i) Bleached and stoved shaded ii) Other shades b) Acrylic or blended")	-	0	NA
5.2- Table 2 vi)("REQUIREMENTS - Minimum colour fastness rating a) Light b) Washing: Test A(1) i) Change in colour ii) Staining of adjacent fabric c) Rubbing (Dry and wet) d) Dry-cleaning")	-	0	NA
5.2- Table 2 vii)(REQUIREMENTS - Fibre composition, percent)	-	0	NA
5.2- Table 2 viii)(REQUIREMENTS - Fineness grade of wool (woollen pullover))	-	0	NA
6(MARKING)	-	0	NA
7(PACKING)	-	0	NA

-
Included w.e.f. 09.05.2024

182

IS 170 (2020)

Acetone — Specification ( Fifth Revision )

11700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Description)	-	200	10% Discount on BIS Sample.
3.2(Miscibility with Water)	-	300	10% Discount on BIS Sample.
4.1(Packing)	-	100	10% Discount on BIS Sample.
4.2(Marking)	-	100	10% Discount on BIS Sample.
3.3 & 6.1 - Table -1, Sl no. 1(Purity %, Annex A)	-	2500	10% Discount on BIS Sample.
3.3 & 6.1 - Table -1, Sl no. 2(Colour, Pt-Co scale, IS 8768)	-	1500	10% Discount on BIS Sample.
3.3 & 6.1 - Table -1, Sl no. 3(Relative density, 6 of IS 82)	-	500	10% Discount on BIS Sample.
3.3 & 6.1 - Table -1, Sl no. 4(Distillation range, IS 1448-Part 18)	-	500	10% Discount on BIS Sample.
3.3 & 6.1 - Table -1, Sl no. 5(Water content, %, IS 2362)	-	500	10% Discount on BIS Sample.
3.3 & 6.1 - Table -1, Sl no. 6(Residue on evaporation, mg/ 100 ml, 8 of IS 82)	-	500	10% Discount on BIS Sample.
3.3 & 6.1 - Table -1, Sl no. 7(Acidity, g/100 ml, Annex C)	-	1000	10% Discount on BIS Sample.
3.3 & 6.1 - Table -1, Sl no. 8(Alkalinity, Annex D)	-	1000	10% Discount on BIS Sample.
3.3 & 6.1 - Table -1, Sl no. 9(Permanganate test, minutes, Annex E)	-	500	10% Discount on BIS Sample.
3.3 & 6.1 - Table -1, Sl no. 10(Alcoholic impurities, Annex F)	-	500	10% Discount on BIS Sample.
3.3 & 6.1 - Table -1, Sl no. 11(Benzene content mg/kg, Annex A)	-	1000	10% Discount on BIS Sample.
3.3 & 6.1 - Table -1, Sl no. 12(Methanol content mg/kg, Annex A)	-	1000	10% Discount on BIS Sample.
Cl No 3.1( Description)	-	0	NA
Cl No 3.2(Miscibility with Water)	-	0	NA
Cl 3.3 and 6.1 ANNEX A [ Table 1, Sl No. (i) ](Purity)	-	0	NA
Cl 3.3 and 6.1 [ Table 1, Sl No. (ii) ] ref to IS 8768(Colour)	-	0	NA
Cl 3.3 and 6.1 [ Table 1, Sl No. (iii) ] ref to 6 of IS 82(Relative density, at 27/27 °C)	-	0	NA
Cl 3.3 and 6.1 [ Table 1, Sl No. (iv) ] IS 1448 (Part 18) with the thermometer containing to the requirements given to Annex B(*Distillation range)	-	0	NA
Cl 3.3 and 6.1 [ Table 1, Sl No. (v) ] ref to IS 2362(Water content)	-	0	NA
Cl 3.3 and 6.1 [ Table 1, Sl No. (vi) ] ref to 8 of IS 82(Residue on evaporation)	-	0	NA
Cl 3.3 and 6.1 ANNEX C [ Table 1, Sl No. (vii) ](Acidity (as CH3COOH),)	-	0	NA
Cl 3.3 and 6.1 ANNEX D [ Table 1, Sl No. (viii) ](Alkalinity)	-	0	NA
Cl 3.3 and 6.1 ANNEX E [ Table 1, Sl No. (ix) ](Permanganate test)	-	0	NA
Cl 3.3 and 6.1 ANNEX F [ Table 1, Sl No. (x) ](Alcoholic impurities)	-	0	NA
Cl 3.3 and 6.1 ANNEX A [ Table 1, Sl No. (xi) ](Benzene content)	-	0	NA
Cl 3.3 and 6.1 ANNEX A [ Table 1, Sl No. (xii) ](Methanol content)	-	0	NA

-
-

183

IS 2052 (2023)

Compounded feeds for cattle ï¿½ Specification

15050 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl no.4.1(General)	-	100	10% discount for BIS
Cl no.4.2(Ingredients)	-	100	10% discount for BIS
Cl no.4.3,7.1, Table no. 1(i)(Moisture)	-	500	10% discount for BIS
Cl no.4.3,7.1, Table no. 1(ii)(Crude protein (N × 6.25))	-	750	10% discount for BIS
Cl no.4.3, 7.1,Table no. 1(iii)(Crude fat)	-	750	10% discount for BIS
Cl no.4.3 ,7.1, Table no. 1(iv)(Crude fibre)	-	1000	10% discount for BIS
Cl no.4.3 ,7.1, Table no. 1(v)(Acid insoluble ash)	-	600	10% discount for BIS
Cl no.4.3,7.1Table no. 1(vi)("Salt (as NaCl based on Na or Cl), percent by mass")	-	500	10% discount for BIS
Cl no.4.3 7.1,Table no. 1(vii)(Calcium (as Ca))	-	500	10% discount for BIS
Cl no.4.3,7.1,Table no. 1(viii)(Total phosphorus)	-	800	10% discount for BIS
Cl no.4.3,7.1,Table no. 1(ix)(Available phosphorus)	-	800	10% discount for BIS
Cl no.4.3 ,7.1, Table no. 1(x)(Urea, percent by mass)	-	500	10% discount for BIS
Cl no.4.3,7.1, Table no. 1(xi)(Vitamin A)	-	1800	10% discount for BIS
Cl no.4.3,7.1,Table no. 1(xii)(Vitamin D)	-	1800	10% discount for BIS
Cl no.4.3 ,7.1, Table no. 1(xiii)(Vitamin E)	-	1800	10% discount for BIS
Cl no.4.3 ,7.1, Table no. 1(xiv)(Aflatoxin B1)	-	2000	10% discount for BIS
Cl no.4.3 ,7.1, Table no. 1(xv)(Cadmium)	-	500	10% discount for BIS
Cl no.5(Packing and marking)	-	250	10% discount for BIS
4.1(General)	-	0	NA
4.2.2(Ratio of total nitrogen to sulphur/ IS/ISO 5983 (Part 1)* or IS/ISO 5983 (Part 2) ISO 16634-Sulphur-AnnexB (IS 1664 or EN 15621))	-	0	NA
4.3 Table no.1 (i)(Moisture/4 of IS 7874 (Part 1))	-	0	NA
4.3 Table no.1 (ii)("Crude Protein(ODB)/IS/ISO 5983 (Part 1)* or IS 5983 (Part 2) or ISO 16634-1")	-	0	NA
4.3 Table no.1 (iii)(Crude fat (ODB) /IS/ISO 6492)	-	0	NA
4.3 Table no.1 (iv)("Crude fibre (ODB)/IS/ISO 6865 ")	-	0	NA
4.3 Table no.1 (v)(Acid insoluble ash (ODB)/Annex A of IS 1712 or IS 14826*)	-	0	NA
4.3 Table no.1 (vi)("Salt (ODB)(as NaCl based on Na or Cl)/4 of IS 7874 (Part 2)")	-	0	NA
4.3 Table no.1 (vii)(Calcium(ODB) (as Ca)/IS 13433 (Part 1) or IS 15121* or EN 15621)	-	0	NA
4.3 Table no.1 (viii)(Total phosphorus (ODB)/IS 14828* or EN 15621)	-	0	NA
4.3 Table no.1 (ix)(Available phosphorus (ODB)/Annex F of IS 1374)	-	0	NA
4.3 Table no.1 (x)(Urea (ODB)/IS 7874 (Part 1) or AOAC 967.07)	-	0	NA
4.3 Table no.1 (xi)(Vitamin A(ODB)/IS 15120)	-	0	NA
4.3 Table no.1 (xii)("Vitamin D3 (ODB)/Annex C * or J. AOAC Int. 2012, Vol. 95, No. 5, Pages 1487–1494")	-	0	NA
4.3 Table no.1 (xiii)(Vitamin E(ODB)/IS 15948)	-	0	NA
4.3 Table no.1 (xiv)("Aflatoxin B1 (ODB)/IS/ISO 14718* or ISO 17375 or AOAC 2003.02")	-	0	NA
4.3 Table no.1 (xv)(Cadmium (ODB)/EN 17053)	-	0	NA

-
Included w.e.f. 02.04.2024

184

IS 5676 (1995)

Moulded solid rubber soles and heels - SpecificatlOn (Second Revision)

7650 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5/5.3/5.3.1(REQUIREMENTS- Construction)	-	200	Bis sample 10% discount
5/5.5- Table1(REQUIREMENTS-Thickness)	-	200	Bis sample 10% discount
5/5.7- Table2(REQUIREMENTS- Physical Requirements- as per IS 3400 (Part 1, Part 2, Part 4, Part 9, Part 10, Part 16))	-	7500	Bis sample 10% discount
5/5.3/5.3.1(REQUIREMENTS- Construction)	-	200	Bis sample 10% discount
5/5.2- Fig. 1 to 5(REQUIREMENTS-Design)	-	200	Bis sample 10% discount
5/5.5- Table1(REQUIREMENTS-Thickness)	-	200	Bis sample 10% discount
5/5.7- Table2(REQUIREMENTS- Physical Requirements- as per IS 3400 (Part 1, Part 2, Part 4, Part 9, Part 10, Part 16))	-	7500	Bis sample 10% discount
5/5.3/5.3.1(REQUIREMENTS- Construction)	-	200	Bis sample 10% discount
5/5.2- Fig. 1 to 5(REQUIREMENTS-Design)	-	200	Bis sample 10% discount
5/5.5- Table1(REQUIREMENTS-Thickness)	-	200	Bis sample 10% discount
5/5.7- Table2(REQUIREMENTS- Physical Requirements- as per IS 3400 (Part 1, Part 2, Part 4, Part 9, Part 10, Part 16))	-	7500	Bis sample 10% discount
8.3(Measurement of thickness)	-	200	Bis sample 10% discount
Cl.8.3(Measurement of thickness ")	-	200	Bis sample 10% discount
5.5 (Amendment 1)(Thickness)	-	200	Bis sample 10% discount
5.7 Table 2 i) (Amendment 1)(Relative Density)	-	300	Bis sample 10% discount
5.7, Table 2 ii) (Amendment 1)(Hardness, degree, Shore A)	-	400	Bis sample 10% discount
5.7, Table 2 iv) (Amendment 1)(Abrasion Resistance at applied force of 10 N)	-	800	Bis sample 10% discount
5.7, Table 2 v) (Amendment 1)(Tensile strength)	-	700	Bis sample 10% discount
5.7, Table 2 vi) (Amendment 1)(Elongation at break)	-	500	Bis sample 10% discount
5.7, Table 2 vii) (Amendment 1)(Tear strength (average force))	-	600	Bis sample 10% discount
5.7, Table 2 iii) (Amendment 1)(Flexing resistance)	-	800	Bis sample 10% discount
5/5.1(REQUIREMENTS-General)	-	0	NA
5/5.2- Fig. 1 to 5(REQUIREMENTS-Design)	-	0	NA
5/5.6/5.6.1(REQUIREMENTS-Channel)	-	0	NA
5/5.1(REQUIREMENTS-General)	-	0	NA
5/5.6/5.6.1(REQUIREMENTS-Channel)	-	0	NA
5/5.1(REQUIREMENTS-General)	-	0	NA
5/5.6/5.6.1(REQUIREMENTS-Channel)	-	0	NA
6(Marking and packing)	-	0	NA
8.1(Test methods)	-	0	NA
Cl.6.1,6.2,6.3(Marking and packing)	-	0	NA
8.1(Test Methods)	-	0	NA

-
-

185

IS 10702 (2023)

Hawai Chappal-Specification

HAWAI CHAPPAL - SPECIFICATION

34481 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Material)	-	100	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
4.2(Length)	-	100	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
4.3(Thickness)	-	100	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
4.4 , Table No. 1 , i)(Density)	-	200	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
4.4 , Table No. 1 , ii)(2Compression set at constant stress)	-	500	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
4.4 , Table No. 1 , iii)(3Split tear strength)	-	500	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
4.4 , Table No. 1 , iv)("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber")	-	500	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
4.4 , Table No. 1 , v)(5Abrasion resistance at applied force)	-	800	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
4.4 , Table No. 1 , vi)(Flexing resistance: Maximum cut growth at 50 000 flexes)	-	800	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
4.4 , Table No. 1 , vii)(7 Hydrolysis resistance, Maximum cut growth at 50 000 flexes)	-	2400	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
4.4 , Table No . 2 , i)(Density , Solid strap, Cellular strap)	-	200	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
4.4 , Table No . 2 , ii)("Breaking strength , Strap to strap and Toe portion to strap , Elongation at break")	-	500	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
4.4 , Table No . 2 , iii)(Minimum cross section of the stud)	-	300	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
4.4 , Table No . 2 , iv)(Stud bolt)	-	300	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
4.4 , Table No . 3 , i)(Toe post attachment strength)	-	500	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
4.4 , Table No . 3 , ii)(Attachment strength of rear strap)	-	500	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
4.4 , Table No . 3 , iii)(Inter layer bond strength)	-	700	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
5(CHEMICAL REQUIREMENT FOR HAWAI CHAPPAL)	-	28000	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
Cl.No. 5.2(lead content)	-	1000	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
4.3(Thickness)	-	200	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
4.4 , Table No . 2 , iii)(Minimum cross section of the stud)	-	200	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
4.4 , Table No . 2 , iv)(Stud bolt)	-	200	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
Cl. No.5.1,Table no.1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	4500	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
Cl. No.5.1,Table no.1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	2200	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
Cl. No.5.1,Table no.1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	2200	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
Cl. No.5.1,Table no.1 of IS 17011(iv)(Chromium (VI))	-	1000	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
Cl. No.5.1,Table no.1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	2400	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
Cl. No.5.1,Table no.1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
Cl. No.5.1,Table no.1 of IS 17011(vii)(Formaldehyde)	-	1000	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
Cl. No.5.1,Table no.1 of IS 17011(viii)(Organotin compounds)	-	4500	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
Cl. No.5.1,Table no.1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	2400	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
Cl. No.5.1,Table no.1 of IS 17011(x)(pH)	-	300	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
Cl. No.5.1,Table no.1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	2800	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
Cl. No.5.1,Table no.1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	1500	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
Clause 4.1 - 4.1.1(Bottom Material)	-	100	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
Clause 4.1 - 4.1.2(Strap Material)	-	100	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
Clause 4.1 - 4.1.3(Material)	-	100	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
Clause 4.1 - 4.1.4(Material)	-	100	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
Clause 4.2(Material)	-	100	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
Clause 4.3 - 4.3.1(Thickness)	-	200	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
Clause 4.3 - 4.3.2(Thickness)	-	200	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
Clause 4.4 Table 1 -i)(Density, g/cm3, Min)	-	200	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
Clause 4.4 Table 1 -iii)(Split tear strength, kg, Min)	-	500	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
Clause 4.4 Table 1 -iv) - a("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, percent, Max")	-	500	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
Clause 4.4 Table 1 -iv) - b(Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber, percent, Max)	-	500	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
Clause 4.4 Table 1 -v)(Abrasion resistance at applied force 5 N)	-	800	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
Clause 4.4 Table 2 -i) - a("Density, g/cm3 Solid strap ")	-	200	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
Clause 4.4 Table 2 -i) - b(Density, g/cm3 Cellular strap)	-	200	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
Clause 4.4 Table 2 -ii) - a - 1("Breaking strength, kgf, Min Strap to strap(Solid Strap)")	-	500	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
Clause 4.4 Table 2 -ii) - a - 2("Breaking strength, kgf, Min Strap to strap(Cellular Strap)")	-	500	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
Clause 4.4 Table 2 -ii) - a - 3("Breaking strength, kgf, Min Toe portion to strap(Solid Strap)")	-	500	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
Clause 4.4 Table 2 -ii) - a - 4("Breaking strength, kgf, Min Toe portion to strap(Cellular Strap)")	-	500	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
Clause 4.4 Table 2 -ii) - b - 1("Elongation at break, percent (Applicable to strap to strap (V shape) Solid Strap")	-	500	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
Clause 4.4 Table 2 -ii) - b - 2("Elongation at break, percent (Applicable to strap to strap (V shape) Cellular Strap")	-	500	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
Clause 4.4 Table 2 -iii) - a("Minimum cross section of the stud, mm, Size 1 to 13 (Adult)")	-	200	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
Clause 4.4 Table 2 -iii) - b("Minimum cross section of the stud, mm, Size 3 to 13 (Children)")	-	200	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
Clause 4.4 Table 2 -iv) - a("Stud bolt, mm Diameter/edge to edge length")	-	200	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
Clause 4.4 Table 2 -iv) - b("Stud bolt, mm Thickness")	-	200	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
Clause 4.4 Table 3 -i)("Toe post attachment strength, N, Min")	-	500	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
Clause 4.4 Table 3 -ii)("Attachment strength of rear strap, N, Min")	-	4500	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
Clause 4.4 Table 3 -iii)("Inter layer bond strength, N/mm, Min")	-	700	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
5(CHEMICAL REQUIREMENT FOR HAWAI CHAPPAL)	-	2800	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
6(MARKING AND PACKING)	-	200	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
Cl. No.5.1,Table no.1 of IS 17011(iv)(Chromium (VI))	-	1200	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
Clause 4.4 Table 2 -iii) - a("Minimum cross section of the stud, mm, Size 1 to 13 (Adult)")	-	300	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
Clause 4.4 Table 2 -iii) - b("Minimum cross section of the stud, mm, Size 3 to 13 (Children)")	-	300	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
Clause 4.4 Table 2 -iv) - a("Stud bolt, mm Diameter/edge to edge length")	-	300	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
Clause 4.4 Table 2 -iv) - b("Stud bolt, mm Thickness")	-	300	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
Clause 4.4 Table 3 -ii)("Attachment strength of rear strap, N, Min")	-	500	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
6(MARKING AND PACKING)	-	100	15% Discount on BIS samples & 10% on CLE, AFMEC & FAFM Samples.
4.1(Material)	-	0	-
4.2(Length)	-	0	-
4.3(Thickness)	-	0	-
4.4 , Table No. 1 , i)(Density)	-	0	-
4.4 , Table No. 1 , ii)(2Compression set at constant stress)	-	0	-
4.4 , Table No. 1 , iii)(3Split tear strength)	-	0	-
4.4 , Table No. 1 , iv)("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber")	-	0	-
4.4 , Table No. 1 , v)(5Abrasion resistance at applied force)	-	0	-
4.4 , Table No. 1 , vi)(Flexing resistance: Maximum cut growth at 50 000 flexes)	-	0	-
4.4 , Table No. 1 , vii)(7 Hydrolysis resistance, Maximum cut growth at 50 000 flexes)	-	0	-
4.4 , Table No . 2 , i)(Density , Solid strap, Cellular strap)	-	0	-
4.4 , Table No . 2 , ii)("Breaking strength , Strap to strap and Toe portion to strap , Elongation at break")	-	0	-
4.4 , Table No . 2 , iii)(Minimum cross section of the stud)	-	0	-
4.4 , Table No . 2 , iv)(Stud bolt)	-	0	-
4.4 , Table No . 3 , i)(Toe post attachment strength)	-	0	-
4.4 , Table No . 3 , ii)(Attachment strength of rear strap)	-	0	-
4.4 , Table No . 3 , iii)(Inter layer bond strength)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	0	-
Cl.No. 5.2(lead content)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(iv)(Chromium (VI))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(vii)(Formaldehyde)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(viii)(Organotin compounds)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(x)(pH)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	0	-
Clause 4.1 - 4.1.1(Bottom Material)	-	0	-
Clause 4.1 - 4.1.2(Strap Material)	-	0	-
Clause 4.1 - 4.1.3(Material)	-	0	-
Clause 4.1 - 4.1.4(Material)	-	0	-
Clause 4.2(Material)	-	0	-
Clause 4.3 - 4.3.1(Thickness)	-	0	-
Clause 4.3 - 4.3.2(Thickness)	-	0	-
Clause 4.4 Table 1 -i)(Density, g/cm3, Min)	-	0	-
Clause 4.4 Table 1 -iii)(Split tear strength, kg, Min)	-	0	-
Clause 4.4 Table 1 -iv) - a("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, percent, Max")	-	0	-
Clause 4.4 Table 1 -iv) - b(Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber, percent, Max)	-	0	-
Clause 4.4 Table 1 -v)(Abrasion resistance at applied force 5 N)	-	0	-
Clause 4.4 Table 2 -i) - a("Density, g/cm3 Solid strap ")	-	0	-
Clause 4.4 Table 2 -i) - b(Density, g/cm3 Cellular strap)	-	0	-
Clause 4.4 Table 2 -ii) - a - 1("Breaking strength, kgf, Min Strap to strap(Solid Strap)")	-	0	-
Clause 4.4 Table 2 -ii) - a - 2("Breaking strength, kgf, Min Strap to strap(Cellular Strap)")	-	0	-
Clause 4.4 Table 2 -ii) - a - 3("Breaking strength, kgf, Min Toe portion to strap(Solid Strap)")	-	0	-
Clause 4.4 Table 2 -ii) - a - 4("Breaking strength, kgf, Min Toe portion to strap(Cellular Strap)")	-	0	-
Clause 4.4 Table 2 -ii) - b - 1("Elongation at break, percent (Applicable to strap to strap (V shape) Solid Strap")	-	0	-
Clause 4.4 Table 2 -ii) - b - 2("Elongation at break, percent (Applicable to strap to strap (V shape) Cellular Strap")	-	0	-
Clause 4.4 Table 2 -iii) - a("Minimum cross section of the stud, mm, Size 1 to 13 (Adult)")	-	0	-
Clause 4.4 Table 2 -iii) - b("Minimum cross section of the stud, mm, Size 3 to 13 (Children)")	-	0	-
Clause 4.4 Table 2 -iv) - a("Stud bolt, mm Diameter/edge to edge length")	-	0	-
Clause 4.4 Table 2 -iv) - b("Stud bolt, mm Thickness")	-	0	-
Clause 4.4 Table 3 -i)("Toe post attachment strength, N, Min")	-	0	-
Clause 4.4 Table 3 -ii)("Attachment strength of rear strap, N, Min")	-	0	-
Clause 4.4 Table 3 -iii)("Inter layer bond strength, N/mm, Min")	-	0	-
5(CHEMICAL REQUIREMENT FOR HAWAI CHAPPAL)	-	0	-
6(MARKING AND PACKING)	-	0	-
4.1(Material)	-	-	-
4.2(Length)	-	-	-
4.3(Thickness)	-	-	-
4.4 , Table No. 1 , i)(Density)	-	-	-
4.4 , Table No. 1 , ii)(2Compression set at constant stress)	-	-	-
4.4 , Table No. 1 , iii)(3Split tear strength)	-	-	-
4.4 , Table No. 1 , iv)("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber")	-	-	-
4.4 , Table No. 1 , v)(5Abrasion resistance at applied force)	-	-	-
4.4 , Table No. 1 , vi)(Flexing resistance: Maximum cut growth at 50 000 flexes)	-	-	-
4.4 , Table No. 1 , vii)(7 Hydrolysis resistance, Maximum cut growth at 50 000 flexes)	-	-	-
4.4 , Table No . 2 , i)(Density , Solid strap, Cellular strap)	-	-	-
4.4 , Table No . 2 , ii)("Breaking strength , Strap to strap and Toe portion to strap , Elongation at break")	-	-	-
4.4 , Table No . 2 , iii)(Minimum cross section of the stud)	-	-	-
4.4 , Table No . 2 , iv)(Stud bolt)	-	-	-
4.4 , Table No . 3 , i)(Toe post attachment strength)	-	-	-
4.4 , Table No . 3 , ii)(Attachment strength of rear strap)	-	-	-
4.4 , Table No . 3 , iii)(Inter layer bond strength)	-	-	-
Cl. No.5.1,Table no.1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	-	-
Cl.No. 5.2(lead content)	-	-	-
Cl. No.5.1,Table no.1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	-	-
Cl. No.5.1,Table no.1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	-	-
Cl. No.5.1,Table no.1 of IS 17011(iv)(Chromium (VI))	-	-	-
Cl. No.5.1,Table no.1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	-	-
Cl. No.5.1,Table no.1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	-	-
Cl. No.5.1,Table no.1 of IS 17011(vii)(Formaldehyde)	-	-	-
Cl. No.5.1,Table no.1 of IS 17011(viii)(Organotin compounds)	-	-	-
Cl. No.5.1,Table no.1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	-	-
Cl. No.5.1,Table no.1 of IS 17011(x)(pH)	-	-	-
Cl. No.5.1,Table no.1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	-	-
Cl. No.5.1,Table no.1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	-	-
Clause 4.1 - 4.1.1(Bottom Material)	-	-	-
Clause 4.1 - 4.1.2(Strap Material)	-	-	-
Clause 4.1 - 4.1.3(Material)	-	-	-
Clause 4.1 - 4.1.4(Material)	-	-	-
Clause 4.2(Material)	-	-	-
Clause 4.3 - 4.3.1(Thickness)	-	-	-
Clause 4.3 - 4.3.2(Thickness)	-	-	-
Clause 4.4 Table 1 -i)(Density, g/cm3, Min)	-	-	-
Clause 4.4 Table 1 -iii)(Split tear strength, kg, Min)	-	-	-
Clause 4.4 Table 1 -iv) - a("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, percent, Max")	-	-	-
Clause 4.4 Table 1 -iv) - b(Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber, percent, Max)	-	-	-
Clause 4.4 Table 1 -v)(Abrasion resistance at applied force 5 N)	-	-	-
Clause 4.4 Table 2 -i) - a("Density, g/cm3 Solid strap ")	-	-	-
Clause 4.4 Table 2 -i) - b(Density, g/cm3 Cellular strap)	-	-	-
Clause 4.4 Table 2 -ii) - a - 1("Breaking strength, kgf, Min Strap to strap(Solid Strap)")	-	-	-
Clause 4.4 Table 2 -ii) - a - 2("Breaking strength, kgf, Min Strap to strap(Cellular Strap)")	-	-	-
Clause 4.4 Table 2 -ii) - a - 3("Breaking strength, kgf, Min Toe portion to strap(Solid Strap)")	-	-	-
Clause 4.4 Table 2 -ii) - a - 4("Breaking strength, kgf, Min Toe portion to strap(Cellular Strap)")	-	-	-
Clause 4.4 Table 2 -ii) - b - 1("Elongation at break, percent (Applicable to strap to strap (V shape) Solid Strap")	-	-	-
Clause 4.4 Table 2 -ii) - b - 2("Elongation at break, percent (Applicable to strap to strap (V shape) Cellular Strap")	-	-	-
Clause 4.4 Table 2 -iii) - a("Minimum cross section of the stud, mm, Size 1 to 13 (Adult)")	-	-	-
Clause 4.4 Table 2 -iii) - b("Minimum cross section of the stud, mm, Size 3 to 13 (Children)")	-	-	-
Clause 4.4 Table 2 -iv) - a("Stud bolt, mm Diameter/edge to edge length")	-	-	-
Clause 4.4 Table 2 -iv) - b("Stud bolt, mm Thickness")	-	-	-
Clause 4.4 Table 3 -i)("Toe post attachment strength, N, Min")	-	-	-
Clause 4.4 Table 3 -ii)("Attachment strength of rear strap, N, Min")	-	-	-
Clause 4.4 Table 3 -iii)("Inter layer bond strength, N/mm, Min")	-	-	-
5(CHEMICAL REQUIREMENT FOR HAWAI CHAPPAL)	-	-	-
6(MARKING AND PACKING)	-	-	-

-
Included w.e.f. 05.03.2024 Amendment No.1 Included w.e.f. 01.05.2024

186

IS 15844 : Part 2 (2023)

SPORTS FOOTWEAR PART -2 PERFORMANCE SPORTS FOOTWEAR

62500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(DESIGN)	-	100	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
6(SIZE AND FITTINGS)	-	100	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.1.1(Whole Footwear)	-	100	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.1.2(Upper to Mid Sole/Out Sole Bond Performance)	-	500	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.1.3("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	500	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.1.4(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	500	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.1.5(Energy Absorption at Seat Region)	-	500	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.1.6(Complete Shoe Flexing)	-	600	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.1.7(Washability)	-	500	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.1.8(Slip Resistance)	-	1800	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.1.9(Heel Drop)	-	100	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.2 , Table No. 2 , i)(Flexing resistance)	-	600	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.2 , Table No. 2 , ii)(Tear strength (average force))	-	500	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.2 , Table No. 2 , iii)("Colour fastness rubbing (To and fro) Grey scale rate Dry: (rubbing) Rating: (Marring and staining) ")	-	300	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.2 , Table No. 2 , iv) ,a)(Water vapour permeability)	-	600	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.2 , Table No. 2 , iv) ,b)(Water vapour coefficient)	-	100	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.2 , Table No. 2 , v)(Stitch tear strength (double hole))	-	500	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.2 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Rating: (Marring)")	-	800	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.2 , Table No. 2 , vii)(Tensile strength)	-	500	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.2 , Table No. 2 , viii)(Elongation at break,)	-	100	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.2 , Table No. 2 , ix)("Water penetration and water absorption after 60 Minutes Water absorption %, Max Water penetration Gms, Max")	-	500	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.2 , Table No. 2 , x)(Abrasion test (for unlined upper))	-	600	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.2 , Table No. 3 , i)(Breaking strength "As per Method 1 of IS 7016 (Part 2)/ ISO 1421 : 2016 or ISO 17706")	-	500	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.2 , Table No. 3 , ii)(Elongation at break)	-	100	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.2 , Table No. 3 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	500	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.2 , Table No. 3 , iv)(Strength at needle perforation)	-	500	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.2 , Table No. 3 , v)("Flexing resistance, no crack/damage to coating/ lamination / upper material till prescribed cycles")	-	600	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.2 , Table No. 3 , vi) , a)(Water vapour permeability,)	-	600	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.2 , Table No. 3 , vi) , b)("Water vapour coefficient, ")	-	100	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.2 , Table No. 3 , vii)(Hydrolysis resistance)	-	1000	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.2 , Table No. 3 , viii)(Colour fastness to light grey scale rate)	-	800	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.2 , Table No. 3 , ix)(Bursting Strength,)	-	400	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.3 , Table No. 4 , i)(Tear strength,)	-	500	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.3 , Table No. 4 , ii)(Abrasion resistance, cycles)	-	500	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.3 , Table No. 4 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, ")	-	300	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.3 , Table No. 4 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, ")	-	400	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.3 , Table No. 4 , v) , a)(Water vapour permeability,)	-	600	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.3 , Table No. 4 , v) , b)("Water vapour coefficient, " As per IS 15298 (Part 1))	-	100	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.4 , Table No. 5 , i)(Thickness)	-	100	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.4 , Table No. 5 , ii)(Flexing index)	-	600	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.4 , Table No. 5 , iii)(Abrasion resistance, at 400 cycles)	-	600	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.4 , Table No. 5 , iv) , a)(Water Absorption,)	-	500	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.4 , Table No. 5 , iv) , b)(Water Desorption)	-	100	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.5 , Table No. 6 , i)(Thickness)	-	100	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.5 , Table No. 6 , ii)(Abrasion resistance, cycles As per IS 15298 (Part 1))	-	600	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.5 , Table No. 6 , iii) , a)(Water Absorption)	-	500	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.5 , Table No. 6 , iii) , b)(Water Desorption)	-	100	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.5 , Table No. 6 , iv)(Heat resistance shrinkage linear)	-	300	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.6 , Table No. 7 , i)(Abrasion resistance (volume loss))	-	800	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.6 , Table No. 7 , ii)(Flexing resistance)	-	600	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.6 , Table No. 7 , iii)(Hydrolysis resistance, cut growth after 1 50 000 flexes)	-	1000	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.6 , Table No. 7 , iv)(Tear strength)	-	500	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.6 , Table No. 7 , v)(Tensile strength)	-	500	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.6 , Table No. 7 , vi)(Elongation at break)	-	100	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.6 , Table No. 7 , vii)(Compression set)	-	500	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.7 , Table No. 8 , i)(Compression set)	-	500	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.7 , Table No. 8 , ii)(Split tear strength,)	-	500	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.7 , Table No. 8 , iii)(Heat shrinkage,)	-	500	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.7 , Table No. 8 , iv)(Elongation at break,)	-	100	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.8 , Table No. 9 , i)(First dry collapsing load, hardness)	-	250	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.8 , Table No. 9 , ii)(Resilience)	-	250	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.8 , Table No. 9 , iii)(Moisture resistance)	-	250	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.8 , Table No. 9 , iv) , a)(Initial dry area shape retention)	-	250	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.8 , Table No. 9 , iv) , b)(Area shape retention after 10th collapse, dry)	-	250	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.8 , Table No. 9 , v)(Peel strength)	-	500	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.9 , Table No. 10 , i)(Peel strength)	-	500	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.9 , Table No. 10 , ii)(Shear strength)	-	500	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.10 , Table No. 11 , i)(Limit of useful extension,)	-	500	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.10 , Table No. 11 , ii)(Needle strength,)	-	500	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.11 , Table No. 12 , i)(Breaking strength of lace,)	-	500	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.11 , Table No. 12 , ii)(Lace tag strength,)	-	500	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.11 , Table No. 12 , iii)(Lace to lace abrasion,)	-	500	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.11 , Table No. 12 , iv)("Colour fastness to water Gray Scale Rate")	-	200	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.11 , Table No. 12 , v)(Strength of Buckle/Ski hook)	-	500	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.11 , Table No. 12 , vi)(Corrosion resistance)	-	500	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.12("Chemical Requirement on Complete Product for All Types of Sports Shoe")	-	26000	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.1.1(Whole Footwear)	-	300	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.1.2(Upper to Mid Sole/Out Sole Bond Performance)	-	700	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.1.3("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	700	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.1.4(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	700	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.1.5(Energy Absorption at Seat Region)	-	800	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.1.6(Complete Shoe Flexing)	-	1150	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.1.7(Washability)	-	700	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.1.9(Heel Drop)	-	300	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.2 , Table No. 2 , i)(Flexing resistance)	-	700	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.2 , Table No. 2 , iv) ,a)(Water vapour permeability)	-	700	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.2 , Table No. 2 , iv) ,b)(Water vapour coefficient)	-	700	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.2 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Rating: (Marring)")	-	1000	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.2 , Table No. 2 , viii)(Elongation at break,)	-	500	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.2 , Table No. 2 , ix)("Water penetration and water absorption after 60 Minutes Water absorption %, Max Water penetration Gms, Max")	-	700	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.2 , Table No. 2 , x)(Abrasion test (for unlined upper))	-	800	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.2 , Table No. 3 , ii)(Elongation at break)	-	500	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.2 , Table No. 3 , iv)(Strength at needle perforation)	-	600	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.2 , Table No. 3 , v)("Flexing resistance, no crack/damage to coating/ lamination / upper material till prescribed cycles")	-	700	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.2 , Table No. 3 , vi) , a)(Water vapour permeability,)	-	800	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.2 , Table No. 3 , vi) , b)("Water vapour coefficient, ")	-	800	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.2 , Table No. 3 , vii)(Hydrolysis resistance)	-	2400	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.2 , Table No. 3 , viii)(Colour fastness to light grey scale rate)	-	1000	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.2 , Table No. 3 , ix)(Bursting Strength,)	-	700	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.3 , Table No. 4 , ii)(Abrasion resistance, cycles)	-	800	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.3 , Table No. 4 , v) , a)(Water vapour permeability,)	-	700	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.3 , Table No. 4 , v) , b)("Water vapour coefficient, " As per IS 15298 (Part 1))	-	700	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.4 , Table No. 5 , i)(Thickness)	-	200	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.4 , Table No. 5 , ii)(Flexing index)	-	800	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.4 , Table No. 5 , iii)(Abrasion resistance, at 400 cycles)	-	800	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.4 , Table No. 5 , iv) , a)(Water Absorption,)	-	800	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.4 , Table No. 5 , iv) , b)(Water Desorption)	-	800	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.5 , Table No. 6 , i)(Thickness)	-	200	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.5 , Table No. 6 , ii)(Abrasion resistance, cycles As per IS 15298 (Part 1))	-	800	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.5 , Table No. 6 , iii) , a)(Water Absorption)	-	800	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.5 , Table No. 6 , iii) , b)(Water Desorption)	-	800	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.5 , Table No. 6 , iv)(Heat resistance shrinkage linear)	-	500	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.6 , Table No. 7 , ii)(Flexing resistance)	-	700	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.6 , Table No. 7 , iii)(Hydrolysis resistance, cut growth after 1 50 000 flexes)	-	2400	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.6 , Table No. 7 , vi)(Elongation at break)	-	500	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.6 , Table No. 7 , vii)(Compression set)	-	700	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.7 , Table No. 8 , i)(Compression set)	-	700	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.7 , Table No. 8 , iv)(Elongation at break,)	-	500	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.8 , Table No. 9 , i)(First dry collapsing load, hardness)	-	400	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.8 , Table No. 9 , ii)(Resilience)	-	400	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.8 , Table No. 9 , iii)(Moisture resistance)	-	300	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.8 , Table No. 9 , iv) , a)(Initial dry area shape retention)	-	400	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.8 , Table No. 9 , iv) , b)(Area shape retention after 10th collapse, dry)	-	400	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.9 , Table No. 10 , ii)(Shear strength)	-	600	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.10 , Table No. 11 , i)(Limit of useful extension,)	-	700	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.10 , Table No. 11 , ii)(Needle strength,)	-	700	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.11 , Table No. 12 , iii)(Lace to lace abrasion,)	-	700	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.11 , Table No. 12 , iv)("Colour fastness to water Gray Scale Rate")	-	400	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.12, Table no. 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	4500	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.12, Table no. 1 of IS 17011,(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	2200	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.12, Table no. 1 of IS 17011,(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	2200	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.12, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	1200	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.12, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	2400	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.12, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.12, Table no. 1 of IS 17011,(vii)(Formaldehyde)	-	1000	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.12, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	4500	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.12, Table no. 1 of IS 17011,(ix)(PCP-TeCP-TriCP polychlorophenols)	-	2400	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.12, Table no. 1 of IS 17011,(x)(pH)	-	300	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.12, Table no. 1 of IS 17011,(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	1500	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
4(SAMPLING AND CONDITIONING)	-	100	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
7.12, Table no. 1 of IS 17011,(xi)(Phthalates (each individual phthalate))	-	2800	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
8(MARKING AND PACKING)	-	100	15% Discount on BIS samples & 10% Discount on CLE, AFMEC & FAFM samples
5(DESIGN)	-	0	-
6(SIZE AND FITTINGS)	-	0	-
7.1.1(Whole Footwear)	-	0	-
7.1.2(Upper to Mid Sole/Out Sole Bond Performance)	-	0	-
7.1.3("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	0	-
7.1.4(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	0	-
7.1.5(Energy Absorption at Seat Region)	-	0	-
7.1.6(Complete Shoe Flexing)	-	0	-
7.1.7(Washability)	-	0	-
7.1.8(Slip Resistance)	-	0	-
7.1.9(Heel Drop)	-	0	-
7.2 , Table No. 2 , i)(Flexing resistance)	-	0	-
7.2 , Table No. 2 , ii)(Tear strength (average force))	-	0	-
7.2 , Table No. 2 , iii)("Colour fastness rubbing (To and fro) Grey scale rate Dry: (rubbing) Rating: (Marring and staining) ")	-	0	-
7.2 , Table No. 2 , iv) ,a)(Water vapour permeability)	-	0	-
7.2 , Table No. 2 , iv) ,b)(Water vapour coefficient)	-	0	-
7.2 , Table No. 2 , v)(Stitch tear strength (double hole))	-	0	-
7.2 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Rating: (Marring)")	-	0	-
7.2 , Table No. 2 , vii)(Tensile strength)	-	0	-
7.2 , Table No. 2 , viii)(Elongation at break,)	-	0	-
7.2 , Table No. 2 , ix)("Water penetration and water absorption after 60 Minutes Water absorption %, Max Water penetration Gms, Max")	-	0	-
7.2 , Table No. 2 , x)(Abrasion test (for unlined upper))	-	0	-
7.2 , Table No. 3 , i)(Breaking strength "As per Method 1 of IS 7016 (Part 2)/ ISO 1421 : 2016 or ISO 17706")	-	0	-
7.2 , Table No. 3 , ii)(Elongation at break)	-	0	-
7.2 , Table No. 3 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	0	-
7.2 , Table No. 3 , iv)(Strength at needle perforation)	-	0	-
7.2 , Table No. 3 , v)("Flexing resistance, no crack/damage to coating/ lamination / upper material till prescribed cycles")	-	0	-
7.2 , Table No. 3 , vi) , a)(Water vapour permeability,)	-	0	-
7.2 , Table No. 3 , vi) , b)("Water vapour coefficient, ")	-	0	-
7.2 , Table No. 3 , vii)(Hydrolysis resistance)	-	0	-
7.2 , Table No. 3 , viii)(Colour fastness to light grey scale rate)	-	0	-
7.2 , Table No. 3 , ix)(Bursting Strength,)	-	0	-
7.3 , Table No. 4 , i)(Tear strength,)	-	0	-
7.3 , Table No. 4 , ii)(Abrasion resistance, cycles)	-	0	-
7.3 , Table No. 4 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, ")	-	0	-
7.3 , Table No. 4 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, ")	-	0	-
7.3 , Table No. 4 , v) , a)(Water vapour permeability,)	-	0	-
7.3 , Table No. 4 , v) , b)("Water vapour coefficient, " As per IS 15298 (Part 1))	-	0	-
7.4 , Table No. 5 , i)(Thickness)	-	0	-
7.4 , Table No. 5 , ii)(Flexing index)	-	0	-
7.4 , Table No. 5 , iii)(Abrasion resistance, at 400 cycles)	-	0	-
7.4 , Table No. 5 , iv) , a)(Water Absorption,)	-	0	-
7.4 , Table No. 5 , iv) , b)(Water Desorption)	-	0	-
7.5 , Table No. 6 , i)(Thickness)	-	0	-
7.5 , Table No. 6 , ii)(Abrasion resistance, cycles As per IS 15298 (Part 1))	-	0	-
7.5 , Table No. 6 , iii) , a)(Water Absorption)	-	0	-
7.5 , Table No. 6 , iii) , b)(Water Desorption)	-	0	-
7.5 , Table No. 6 , iv)(Heat resistance shrinkage linear)	-	0	-
7.6 , Table No. 7 , i)(Abrasion resistance (volume loss))	-	0	-
7.6 , Table No. 7 , ii)(Flexing resistance)	-	0	-
7.6 , Table No. 7 , iii)(Hydrolysis resistance, cut growth after 1 50 000 flexes)	-	0	-
7.6 , Table No. 7 , iv)(Tear strength)	-	0	-
7.6 , Table No. 7 , v)(Tensile strength)	-	0	-
7.6 , Table No. 7 , vi)(Elongation at break)	-	0	-
7.6 , Table No. 7 , vii)(Compression set)	-	0	-
7.7 , Table No. 8 , i)(Compression set)	-	0	-
7.7 , Table No. 8 , ii)(Split tear strength,)	-	0	-
7.7 , Table No. 8 , iii)(Heat shrinkage,)	-	0	-
7.7 , Table No. 8 , iv)(Elongation at break,)	-	0	-
7.8 , Table No. 9 , i)(First dry collapsing load, hardness)	-	0	-
7.8 , Table No. 9 , ii)(Resilience)	-	0	-
7.8 , Table No. 9 , iii)(Moisture resistance)	-	0	-
7.8 , Table No. 9 , iv) , a)(Initial dry area shape retention)	-	0	-
7.8 , Table No. 9 , iv) , b)(Area shape retention after 10th collapse, dry)	-	0	-
7.8 , Table No. 9 , v)(Peel strength)	-	0	-
7.9 , Table No. 10 , i)(Peel strength)	-	0	-
7.9 , Table No. 10 , ii)(Shear strength)	-	0	-
7.10 , Table No. 11 , i)(Limit of useful extension,)	-	0	-
7.10 , Table No. 11 , ii)(Needle strength,)	-	0	-
7.11 , Table No. 12 , i)(Breaking strength of lace,)	-	0	-
7.11 , Table No. 12 , ii)(Lace tag strength,)	-	0	-
7.11 , Table No. 12 , iii)(Lace to lace abrasion,)	-	0	-
7.11 , Table No. 12 , iv)("Colour fastness to water Gray Scale Rate")	-	0	-
7.11 , Table No. 12 , v)(Strength of Buckle/Ski hook)	-	0	-
7.11 , Table No. 12 , vi)(Corrosion resistance)	-	0	-
7.12, Table no. 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	0	-
7.12, Table no. 1 of IS 17011,(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
7.12, Table no. 1 of IS 17011,(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
7.12, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	0	-
7.12, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	0	-
7.12, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	-
7.12, Table no. 1 of IS 17011,(vii)(Formaldehyde)	-	0	-
7.12, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	0	-
7.12, Table no. 1 of IS 17011,(ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	-
7.12, Table no. 1 of IS 17011,(x)(pH)	-	0	-
7.12, Table no. 1 of IS 17011,(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	0	-
4(SAMPLING AND CONDITIONING)	-	0	-
7.12, Table no. 1 of IS 17011,(xi)(Phthalates (each individual phthalate))	-	0	-
7.12("Chemical Requirement on Complete Product for All Types of Sports Shoe")	-	0	-
8(MARKING AND PACKING)	-	0	-

-
Included w.e.f. 05.03.2024

187

IS 2080 (2021)

Specification for stabilized hydrogen peroxide First Revision

Industrial chemical

10000 View breakup
-

Clause No.	Exclusion	Remark
5.1(Packing)	-	NA
5.2(Marking)	-	NA
Annex C(Stability)	-	NA
4.1(Description - IS 2080:2021)	-	NA
4.2(Strength - IS 2080:2021)	-	NA
4.3(Stability - IS 2080:2021)	-	NA
4.4/Table 1 (i)(Acidity (as H2SO4) - IS 2080:2021)	-	NA
4.4/Table 1 (ii)(Residue on Evaporation - IS 2080:2021)	-	NA
4.4/Table 1 (iii)(Residue on Ignition - IS 2080:2021)	-	NA
4.4/Table 1 (iv)(Iron (as Fe) - IS 2080:2021)	-	NA
4.4/Table 1 (v)(Copper (as Cu) - IS 2080:2021)	-	NA
4.4/Table 1 (vi)(Lead (as Pb) - IS 2080:2021)	-	NA
4.4/Table 1 (vii)(Arsenic (as As2O3) - IS 2080:2021)	-	NA

-
Included w.e.f. 04.03.2024

188

IS 14968 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing 50 Kg/25 kg sugar – Specification (first revision)

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.5 and Table 1 i(Capacity)	-	250	10% Discount on BIS sample.
5.2 and Table 1 ii a(Dimensions Inside Length)	-	250	10% Discount on BIS sample.
5.2 and Table 1 iii(Ends per dm )	-	250	10% Discount on BIS sample.
5.2 and Table 1 iv(Picks per dm )	-	250	10% Discount on BIS sample.
5.1 and Table 1 v a(Mass of unlaminated sack IS 1964)	-	250	10% Discount on BIS sample.
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise IS 1969 (Part 1))	-	420	10% Discount on BIS sample.
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise IS 1969 (Part 1))	-	420	10% Discount on BIS sample.
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	7500	10% Discount on BIS sample.
5.2 and Table 1 x(Ash content )	-	900	10% Discount on BIS sample.
4.2(Tapes – Width IS 6192 and IS 11197)	-	200	10% Discount on BIS sample.
4.2(Tapes – Linear Density )	-	300	10% Discount on BIS sample.
4.2(Construction)	-	200	10% Discount on BIS sample.
4.3(Sacks)	-	300	10% Discount on BIS sample.
4.3.1(Bottom Seam)	-	600	10% Discount on BIS sample.
4.3.1(The two rows of stitches shall be separated from each other)	-	200	10% Discount on BIS sample.
4.3.1( The outer stitch)	-	200	10% Discount on BIS sample.
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	200	10% Discount on BIS sample.
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	200	10% Discount on BIS sample.
4.3.1(stitches/dm)	-	300	10% Discount on BIS sample.
4.3.2(Mouth)	-	200	10% Discount on BIS sample.
4.4(Mass of the loose liner )	-	300	10% Discount on BIS sample.
4.4(Width of the loose liner)	-	200	10% Discount on BIS sample.
4.4(Length of the line)	-	200	10% Discount on BIS sample.
4.4(Bottom seam of the loose liner)	-	600	10% Discount on BIS sample.
4.4.1(Liner)	-	200	10% Discount on BIS sample.
5.1 and Table 1 v b(Mass of unlaminated sack with liner )	-	300	10% Discount on BIS sample.
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise IS 1969 (Part 1))	-	600	10% Discount on BIS sample.
5.2 and Table 1 vi(Breaking strength of bottom seam IS 9030 )	-	600	10% Discount on BIS sample.

-
-

189

IS 3617 (1992)

Textiles – Gent’s pullover, knitted – Specification (first revision)

5160 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1( Dimensional changes)	-	420	EXCLUDING 18 % GST
5.2(Contruction )	-	120	EXCLUDING 18 % GST
5.2(Dimensional Changes )	-	420	EXCLUDING 18 % GST
5.2(Scouring Loss )	-	550	EXCLUDING 18 % GST
5.2(Alkali Solubility )	-	550	EXCLUDING 18 % GST
5.2(Colorfastness to light )	-	900	EXCLUDING 18 % GST
5.2(Colorfastness to Washing )	-	650	EXCLUDING 18 % GST
5.2(Colorfastness to Rubbing)	-	450	EXCLUDING 18 % GST
5.2(Colorfastness to dry cleaning)	-	450	EXCLUDING 18 % GST
5.2(Fiber content )	-	1050	EXCLUDING 18 % GST

-
-

190

IS 13995 (1995)

Unlined moulded rubber boots - Specification

5400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Thickness )	-	120	10% Discount on BIS sample.
5.1.1(Tensile Strength (before ageing))	-	420	10% Discount on BIS sample.
5.1.2(Tensile Strength (after ageing))	-	4200	10% Discount on BIS sample.
5.1.3(Tear Strength)	-	420	10% Discount on BIS sample.
5.1.4(Resistance to dry heat ageing )	-	550	10% Discount on BIS sample.
5.1.5(Flexing resistance of upper)	-	600	10% Discount on BIS sample.
5.1.6(Design)	-	120	10% Discount on BIS sample.
5.1.7(Size)	-	120	10% Discount on BIS sample.

-
-

191

IS 11544 (1986)

Specification for slipper, rubber

3220 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Shape & Design)	-	120	EXCLUDING 18 % GST
3.2(Relative density )	-	400	EXCLUDING 18 % GST
3.2(Hardness (IRHD))	-	500	EXCLUDING 18 % GST
3.2(Hardness after ageing)	-	550	EXCLUDING 18 % GST
3.2(Flexural endurance)	-	800	EXCLUDING 18 % GST
3.2.4(Mass per unit area)	-	150	EXCLUDING 18 % GST
3.2.4(End per cm)	-	150	EXCLUDING 18 % GST
3.2.4(Picks per cm)	-	150	EXCLUDING 18 % GST
3.2.4(Colour fasntess to washing)	-	400	EXCLUDING 18 % GST
3.2.5(Type of Thread)	-	120	EXCLUDING 18 % GST
3.2.6(Thickness of components)	-	400	EXCLUDING 18 % GST

-
-

192

IS 6664 (1992)

Rubber microcellular sheets for soles and heels - Specification (First Revision)

6950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Size & Thickness )	-	350	10% Discount on BIS Sample.
4.2(Hardness (Shore A))	-	350	10% Discount on BIS Sample.
4.2(Compression set)	-	300	10% Discount on BIS Sample.
4.2(Split tear strength)	-	420	10% Discount on BIS Sample.
4.2(Shrinkage at room temp)	-	4200	10% Discount on BIS Sample.
4.2(Heat Shrinkage )	-	550	10% Discount on BIS Sample.
4.2(Water absorption)	-	300	10% Discount on BIS Sample.
4.2(Flexing resistance )	-	1100	10% Discount on BIS Sample.

-
-

193

IS 297 (2001)

Sodium sulphide, technical - Specification (Second Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2 (i)(Total Sulphide ( as Na2S))	-	1250	EXCLUDING 18 % GST
3.2 (ii)(Sodium )	-	1250	-
3.2 (iii)(Excess Alkali (as Na2CO3))	-	1250	EXCLUDING 18 % GST
3.2 (vi)(Reducing)	-	1250	EXCLUDING 18 % GST
3.2 (v)(Iron and aluminum compound (Fe2O3))	-	1250	EXCLUDING 18 % GST
3.2 (vi)(Sodium Sulphate (Na2SO4))	-	1250	EXCLUDING 18 % GST
3.2 (vii)(Sodium Chloride ( as NaCI))	-	1250	EXCLUDING 18 % GST
3.2 (viii)(Water insoluble)	-	1250	EXCLUDING 18 % GST

-
-

194

IS 3736 (1995)

Canvas boots, rubber sole - Specification (Second Revision)

20695 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4.1.1 upper IS 1969(Breaking load in N.Min (5 × 20 cm grip): a) Wrap)	-	420	10% Discount on BIS Sample.
4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast to daylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454 : 1985.)	-	720	10% Discount on BIS Sample.
4.1.2 Lining Material(195 ± 5 picks/dm shall be used.)	-	660	10% Discount on BIS Sample.
Cl.4.1.3 Binding Material IS 1954:1990(Cotton tape NEWAR used as binding material shall conform to the requirements as mentioned in Table 2, when tested in accordance with the methods referred to in col 4 of Table 2. 1)Width, mm. Min )	-	2940	10% Discount on BIS Sample.
Cl.4.1.4 Reinforcement Material(The back seam, joining two quarters at the back of the heel shall be reinforced with a not less than 25 mm wide tape made out of material conforming to Sl No. (i) of Table 1)	-	120	10% Discount on BIS Sample.
Cl.4.1.5 Thread for Upper Closing Cl.4.1.5.1 (IS 1670:1991)(Sewing thread cotton, man made or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other blend of thread would have breaking load not less than above referred requirements. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other blend of thread would have breaking load not less than above referred requirement of specification.')	-	2490	10% Discount on BIS Sample.
4.1.6 Fabric Laces Cl.4.1.6.1( The boots shall be provided with braided of cotton or man made or blended fabric laces 115 ± 5 cm in length, matching the colour of the upper. )	-	2710	10% Discount on BIS Sample.
Cl.4.1.7.2 IS 3400 (Part 9) : 1978( The rubber components shall conform to Table 4 when tested.' ( Page 3, Table 4, Note 1) — 'However in case it is not possible then 4.2.5.3 of IS 13695:1993 shall be followed. 1)Relative density, Max)	-	3095	10% Discount on BIS Sample.
Cl.4.1.7.4 Ageing(The boots shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the soles and heels of the boots shall conform to the physical requirements prescribed in Table 5. i) Tensile Length)	-	3500	10% Discount on BIS Sample.
Cl.4.1.7.5 Thickness of components(Individual components of the boots shall comply with the thickness and material requirements prescribed in Table 6.)	-	1000	10% Discount on BIS Sample.
4.1.2 Lining Material(195 ± 5 picks/dm shall be used.)	-	120	10% Discount on BIS Sample.
Cl.4.3 Leg Height(The leg height of the boots for size 8 shall be 160 ± 2 mm with an increase or decrease of 4 mm of the nominal height for each bigger or smaller sizes respectively when measured at the inside from the back of the boot from insole to the top.)	-	120	10% Discount on BIS Sample.
Cl.4.4.5 ( Table 1.)( in case of half bellow. Thefull bellow tongue shall be made out of canvas cloth as prescribed in Sl No. (i) of Table 1. Breaking load in N, Min a) Warp )	-	120	10% Discount on BIS Sample.
Cl.4.8 Adhesion Test(From the upper foxing portion where it is adhered to the canvas cut a strip of 8.0 ± 0.5 mm width along with the length of the sole at the waist portion and of sufficient lengh to permit separation over a length of at least 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100 ± 10 mm per minute in accordance with IS 3400 (Part 5):1986 or the Static Dead Load Method as given in Annex C. The individual adhesion value noted/recorded shall not be less than 8 N (0.8 kgf) for each of the test pieces ( see Note under 4.7 ).')	-	720	10% Discount on BIS Sample.
Cl.4.7 Consolidation Test(From the quarter, cut a strip of 25.0 ± 0. 5 mm width along the length of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100 ± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30 N (3.0 kgf) for each of the test pieces)	-	720	10% Discount on BIS Sample.

-
-

195

IS 4505 (2015)

Sodium formaldehyde sulphoxylate - Specification (First Revision)

13215 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl no 4.3 [ Table 1, Sl no.(i) ] Annex A-2 Grade-1(Sodium formaldehyde sulphoxylate dihydrate (NaHSO2.CH2O.2H2O))	-	2000	10% Discount on BIS Sample.
Cl no 4.3 [ Table 1, Sl no.(i) ] Annex A-2 Grade-2(Sodium formaldehyde sulphoxylate dihydrate (NaHSO2.CH2O.2H2O))	-	2000	10% Discount on BIS Sample.
Cl no 4.3 [ Table 1, Sl no.(iii) ] Annex A-2 Grade-1 & Grade 2(Sodium sulphite (Na2SO3))	-	2000	10% Discount on BIS Sample.
Cl no 4.3 [ Table 1, Sl no.(iv) ] Annex A-3 Grade-1 & Grade 2(pH (of 1 percent solution))	-	500	10% Discount on BIS Sample.
Cl no 4.3 [ Table 1, Sl no.(v) ] Annex A-4 Grade-1 (Iron (as Fe))	-	1500	10% Discount on BIS Sample.
Cl no 4.3 [ Table 1, Sl no.(vi) ] Ref to IS 12074 Grade-1 & Grade 2(Lead (as Pb))	-	1500	10% Discount on BIS Sample.
Cl no 4.3 [ Table 1, Sl no.(vii) ] Annex A-5 Grade-1 & Grade 2(Copper (as Cu))	-	1500	10% Discount on BIS Sample.
Cl no 4.3 [ Table 1, Sl no.(viii) ] Annex A-6 Grade-1 (Zinc (as Zn))	-	1500	10% Discount on BIS Sample.

-
-

196

IS 11226 (1993)

Leather safety footwear having direct moulded rubber sole specification (First Revision)

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.11(Materials)	-	4080	10% Discount on BIS Sample.
5.2.11.2(Materials)	-	3910	10% Discount on BIS Sample.
5.3(Components)	-	2620	10% Discount on BIS Sample.
5.4( Manufacture )	-	3910	10% Discount on BIS Sample.
5.4.8(Workmanship and Finish)	-	1930	10% Discount on BIS Sample.
5.5(Mass)	-	420	10% Discount on BIS Sample.
5.6(Performance Test)	-	1500	10% Discount on BIS Sample.
5.7(Adhesion Test on Moulded Bottoms)	-	350	10% Discount on BIS Sample.

-
-

197

IS 12254 (1993)

Polyvinyl chloride (PVC) Industrial boots - Specification (First Revision)

8800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Shape and Dimension)	-	120	EXCLUDING 18 % GST
5.2(Shape and Dimension)	-	120	EXCLUDING 18 % GST
5.3.1(Thickness)	-	550	EXCLUDING 18 % GST
5.4 Table 2(Hardness, IS 12240 (Part 2))	-	700	EXCLUDING 18 % GST
5.5(Relative Density, IS 12240 (Part 3))	-	350	-
5.6(Volatility, IS 12240 ( Part 2) )	-	550	EXCLUDING 18 % GST
5.7(Lead Content )	-	550	EXCLUDING 18 % GST
5.8 Table 3(Tensile Requirements, Upper, IS 12240 ( Part 6) )	-	840	EXCLUDING 18 % GST
5.9(Resistance to Cut Growth (Flexing test) for Sole, IS 12240 (Part 7))	-	600	EXCLUDING 18 % GST
5.1(Resistance to Flexing for Upper, IS 12240 (Part 8))	-	600	EXCLUDING 18 % GST
5.11(Leg Height, IS 12240 (part 9))	-	120	EXCLUDING 18 % GST
5.12(Leakage Resistance)	-	1100	EXCLUDING 18 % GST
5.13(Cold Flex Temperature)	-	1500	EXCLUDING 18 % GST
5.15(Performance)	-	1100	EXCLUDING 18 % GST

-
Included w.e.f. 31.07.2024 Exclusion: Cl.5.5.5 (Upper Cold Flex Resistance)

198

IS 14544 (1998)

Leather safety foot wear with direct moulded polyvinyl chloride (PVC) sole - Specification

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.2(Materials - Insole Material )	-	3910	EXCLUDING 18 % GST
5.2.3(Materials - Stiffener )	-	2620	EXCLUDING 18 % GST
5.2.4(Materials - Lining Material )	-	3910	EXCLUDING 18 % GST
5.2.5(Materials - Threads )	-	420	EXCLUDING 18 % GST
5.2.6, 5.2.6.1(Materials - Grinderies - Lasting tacks )	-	590	EXCLUDING 18 % GST
5.2.6, 5.2.6.2(Materials - Grinderies - Shanks)	-	590	EXCLUDING 18 % GST
5.2.6, 5.2.6.3(Materials - Grinderies - Eyelets)	-	470	EXCLUDING 18 % GST
5.2.7(Materials - Cotton NEWAR)	-	540	EXCLUDING 18 % GST
5.2.8(Materials - Toe-Compound)	-	570	EXCLUDING 18 % GST
5.2.9(Materials - Laces)	-	1930	EXCLUDING 18 % GST
5.2.10(Materials - Steel Toe Cap)	-	1970	EXCLUDING 18 % GST
5.2.11.1 (Table 1)(Sole and Heel )	-	350	EXCLUDING 18 % GST
5.2.11.2(Sole and Heel )	-	350	EXCLUDING 18 % GST
5.2.11.4(Sole and Heel )	-	420	EXCLUDING 18 % GST
5.3 (Table 3)(Components)	-	350	EXCLUDING 18 % GST
5.4.8.3(Workmanship and Finish)	-	350	EXCLUDING 18 % GST
5.5, 5.5.1(Mass)	-	350	EXCLUDING 18 % GST
5.6(Performance Test)	-	350	EXCLUDING 18 % GST
5.7, 5.7.1(Adhesion Test on Moulded Bottoms)	-	420	EXCLUDING 18 % GST

-
-

199

IS 3735 (1996)

Canvas Shoes, Rubber Sole

17500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1 Upper, Sl No. (i) of Table 1(The upper shall consist of over layer of cotton, manmade or blended conforming' to the requirements given in Sl No. (i) of Table 1 as an overlayer and cotton drill conforming to the requirements given in Sl No. (ii) of Table 1, as an inner layer or lining. The two fabrics shall be firmly adhered together with rubber compound. )	-	2140	10% discount on BIS sample.
Cl.4.1.2 Binding Material(IS 1954 : 1990) (IS1969 : 1985)(Cotton tape NEWAR used as binding material shall conform to the requirements prescribed in col 3 of Table 2, when tested in accordance with the methods referred to in col 4 of the table.)	-	2940	10% discount on BIS sample.
Cl.4.1.3.1( Sewing thread cotton, manmade or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification.')	-	2490	10% discount on BIS sample.
Cl.4.1.5 Laces( The shoes shall be provided with fabric braided laces either matching the shade of the upper or black or The length of the lace shall be 60 ± 3 cm )	-	990	10% discount on BIS sample.
Cl.4.1.6 Rubber Components(The rubber components shall conform to the requirements given in Table 4, when tested from finished boots.However in case it is not possible to cut the test pieces from the made up boots then 4.1.5.3 of IS 13695 : 1993 shall be followed.')	-	3095	10% discount on BIS sample.
Cl.4.1.6.2 Ageing col 4 of Table 5.(The shoes shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the shoes shall conform to the physical requirements prescribed in col 4 of Table 5. )	-	3500	10% discount on BIS sample.
CL.4.2 Shape and Design IS 1638 : 1969(Cl 4.2.1 The shoes shall be made according to design and pattern as agreed to between the purchaser and the supplier. Size and fittings of the shoes shall be in accordance with IS 1638 : 1969 unless otherwise specified by the purchaser.)	-	420	10% discount on BIS sample.
Cl.4.3 Construction Cl 4.3.1( The upper shall be stitched on a lock stitch machine and the number of stitches shall be 30 to 40 per dm.)	-	550	10% discount on BIS sample.
Cl.4.4 Adhesion Test(From the upper-foxing portion where it is adhered to the canvas, parallel to the waist of sole, cut a strip of length 100 mm and width 8 mm. Separate out the plies initially by breaking the bond to a length of about 75 mm. Carry out the test on two specimens in accordance with IS 3400 (Part 5) : 1986. There shall be no further separation within 1 minute at a load of 1 kg for each of the two specimens.)	-	720	10% discount on BIS sample.
Cl.4.5 Consolidation Test IS 3400 (Part 5) : 1986 (From the quarter, cut a strip of 25.0 ± 0.5 mm width along the leagth of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30N (3.0 kgf) for each of the teat piecea (see Note under 4.4).')	-	720	10% discount on BIS sample.
CL.4.6 Mass(The mass of one pair of finished shoes of size 8 shall not exceed 750 g with an increase or decrease of 25 g for each bigger or smaller size respectively)	-	120	10% discount on BIS sample.

-
-

200

IS 16208 (2015)

Textiles - High density polyethylene (HDPE)/polypropylene (PP) woven sacks for packaging 10 kg, 15 kg, 20 kg, 25 kg and 30 kg foodgrains - Specification

15500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.4 and Table 1 i(Capacity)	-	250	10% Discount on BIS sample.
5.2 and Table 1 ii a(Dimensions Inside Length)	-	250	10% Discount on BIS sample.
5.2 and Table 1 iii(Ends per dm )	-	250	10% Discount on BIS sample.
5.2 and Table 1 iv(Picks per dm )	-	250	10% Discount on BIS sample.
5.1 and Table 1 v(Mass of sack )	-	250	10% Discount on BIS sample.
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	420	10% Discount on BIS sample.
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	420	10% Discount on BIS sample.
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	420	10% Discount on BIS sample.
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	10500	10% Discount on BIS sample.
5.2 and Table 1 x(Ash content )	-	450	10% Discount on BIS sample.

-
-

201

IS 14887 (2014)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1 and 3.4(Mass of bale (Cl. 4.1), Capacity (Cl 3.4))	-	250	10% Discount on BIS sample.
4.2 and Table 1 ii(Dimensions )	-	250	10% Discount on BIS sample.
5.2 and Table 1 iii(Ends per dm )	-	250	10% Discount on BIS sample.
5.2 and Table 1 iv(Picks per dm )	-	250	10% Discount on BIS sample.
4.2 and Table 1 v(Mass of sack )	-	250	10% Discount on BIS sample.
4.2 and Table 1 vi(Average breaking strength of fabric )	-	420	10% Discount on BIS sample.
4.2 and Table 1 vi(Breaking strength of bottom seam )	-	420	10% Discount on BIS sample.
4.2 and Table 1 viii(Elongation at break of fabric )	-	420	10% Discount on BIS sample.
4.2 and Table 1 x(Ash content )	-	450	10% Discount on BIS sample.

-
-

202

IS 14252 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sack for filling sand – Specification (second revision)

17500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1 and Table 1 i a(Dimensions Outside Length)	-	250	10% Discount on BIS sample.
4.1 and Table 1 ii(Ends per dm )	-	250	10% Discount on BIS sample.
4.1 and Table 1 iii(Picks per dm )	-	250	10% Discount on BIS sample.
4.2 and Table 1 iv(Mass of sack )	-	250	10% Discount on BIS sample.
4.1 and Table 1 v a(Average breaking strength of fabric Warpway )	-	420	10% Discount on BIS sample.
4.1 and Table 1 vii a(Elongation at break of fabric Lengthwise)	-	420	10% Discount on BIS sample.
4.1 and Table 1 viii(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	10500	10% Discount on BIS sample.
4.1 and Table 1 ix(Ash content )	-	900	10% Discount on BIS sample.

-
-

203

IS 3976 (2018)

Safety Rubber Canvas Boots for Miners Ã¢â‚¬ Specification ( Sixth Revision )

13350 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5.2.1.4 ( Type 2 footwear, the composite upper material shall comply with requirements of water coefficient as prescribed in 5.4.6 of IS 15298 (Part 2).)	-	420	EXCLUDING 18% GST
Cl.5.2.1.4 ( Type 2 footwear, the composite upper material shall comply with requirements of water vapour permeability as prescribed in 5.4.6 of IS 15298 (Part 2).)	-	420	EXCLUDING 18% GST
Cl.5.2.1.5( Inner layer of upper shall meet requirement of abrasion resistance as prescribed in 5.5.2 of IS 15298 (Part 2).)	-	3060	EXCLUDING 18% GST
Cl.5.2.2 Compact Insole/Compact Insocks/Counter Stiffener Lining(Textile material shall be used as lining material for compact insole/compact insocks / counter stiffener. It shall meet the requirement of tear strength as prescribed in 5.6.1 of IS 15298 (Part 2).)	-	1320	EXCLUDING 18% GST
Cl.5.2.3 Coated Binding Material Annex C(ii) Breaking load in N, Min (50 cm grip length test specimen) )	-	1090	EXCLUDING 18% GST
Cl.5.2.5 Compact Sole Heel Cl. 5.2.5.1 (The compact sole heel shall be made out of polymeric/rubber components and the typical design recommendation (not mandatory) of compact sole heel is as shown in Fig. 3. Sectional view of Type 1/Type 2 ) toe position is given in Fig. 4.)	-	2160	EXCLUDING 18% GST
Cl.5.2.6 Thread for Upper Closing( The length (m/kg) and construction of sewing thread shall conform to requirements as prescribed in Table 4.)	-	670	EXCLUDING 18% GST
Cl.5.2.7 Safety Toe Cap(Safety toe cap as per 3.6 shall be fitted into the footwear and must not come out while in use.)	-	400	EXCLUDING 18% GST
Cl.5.2.8.1( The boots shall be provided with laces having minimum length of 115 cm for Type 1 and minimum 100 cm for Type 2.)	-	120	EXCLUDING 18% GST
Cl.5.2.8.2 (Minimum breaking load of 60 kg is to be achieved when tested between 18 cm grip length in accordance with Annex C.)	-	420	EXCLUDING 18% GST
Cl.5.2.8.3( In case of cotton lace of black colour, the same shall be free from sulphur dyes when tested in accordance with Annex B. Two ends of the laces shall be provided with plastic tips.)	-	550	EXCLUDING 18% GST
Cl.5.2.9 Eyelets( Aluminum eyelets of external collar diameter not less than 10 mm and wall thickness of 0.30 to 0.35 mm shall be used.)	-	240	EXCLUDING 18% GST
CL.5.2.10 Counter Stiffener( A counter stiffener, made out of textile reinforced withpolymer/rubber including (thermoplastic) having thickness not less than 1.5 mm is to be stitched at inside of upper so as to fortify the back of the footwear at joints of quarter.)	-	120	EXCLUDING 18% GST
Cl.5.3.7( Two pairs of detachable insocks are to be provided. The insocks shall be compact in nature having thickness not less than 2 mm.)	-	400	EXCLUDING 18% GST
Cl.5.4 Finish( In appearance, general workmanship and in all other respects with regard to finish and get up of the footwear, the footwear shall be matching to the approved sample of the purchaser.)	-	120	EXCLUDING 18% GST
Cl.5.5 Mass(The mass of one pair of finished footwear of size 8 shall not exceed 1 500 g for Type 1 and 1 400 g for Type 2 with an increase or decrease of 100 g for each bigger or smaller size, respectively.)	-	120	EXCLUDING 18% GST
Cl.5.6( Height of Upper Height of upper of the boots shall conform to column 5 (Design C) and column 4 (Design B) of 5.2.2, Table 4 of IS 15298 (Part 2) for Type 1 and Type 2, respectively when measured as per 6.2 of IS 15298 (Part 1) on the inside of the back of the footwear and from seat of the insole to top edge of the upper.)	-	120	EXCLUDING 18% GST
Cl.5.7 Performance Test(When safety footwear is tested in accordance with the method described in 5.4 of IS 15298 (Part 1), at an impact energy of (200 ± 4) J, the clearance under the toecap at the moment of impact shall be in accordance with Table 5. In addition, the toecap shall not develop any cracks which go through the material, that is, through which light can be seen.)	-	400	EXCLUDING 18% GST
Cl.5.8 Upper/Outsole Bond Strength(When the footwear is tested in accordance with the method prescribed in 5.2 of IS 15298 (Part 1), the bond strength shall not be less than 4.0 N/mm, unless there is tearing of the sole in which case the bond strength shall not be less than 3.0 N/mm.)	-	420	EXCLUDING 18% GST
Cl.5.9 Sole Interlayer Bond Strength for Bi-polymer( and Bi-density Sole When tested in accordance with 5.2 of IS 15298 (Part 1), the bond strength between the outer or cleated layer and the adjacent layer shall not be less than 4.0 N/mm unless there is tearing of any part of the sole, in which case the bond strength shall not be less than 3.0 N/mm.)	-	420	EXCLUDING 18% GST
Cl.5.10 Consolidation Test( Representative sample of width 25 ± 0.5 mm are cut out from the quarter of the upper along the length of boot. The plies are separated by breaking the bond. Carry out the test on two specimens in accordance with IS 3400 (Part 5). Th)	-	420	EXCLUDING 18% GST
Cl.5.11 Compression Resistance( 5.11.1 When safety boots are tested in accordance with 5.5 of IS 15298 (Part 1), the clearance under the toe cap at a compression load of 15 kN ± 0.1 kN shall be in accordance with Table 5.)	-	400	EXCLUDING 18% GST
Cl.5.12 Internal Length of Toe Cap( For safety boots, internal length of the toe cap shall meet the specification given in Table 5 of IS 15298 (Part 2) when tested as per 5.3 of IS 15298 (Part 1).)	-	120	EXCLUDING 18% GST
Cl.5.13 Energy Absorption Test(When footwear is tested in accordance with the method prescribed in 5.14 of IS 15298 (Part 1), the energy absorption of the seat region shall not be less than 20 J.)	-	400	EXCLUDING 18% GST
Cl.6.1 Abrasion Resistance of Compact Outsole( When outsole is tested in accordance with 8.3 of IS 15298 (Part 1), the relative volume loss shall not be greater than 250 mm³ for materials having density 0.9 g/cm³ or less, and not greater than 150 mm³ for materials with density greater than 0.9 g/cm³.)	-	900	EXCLUDING 18% GST
Cl.6.2 Flexing Resistance of Compact Outsole( When outsole is tested in accordance with 8.4 of IS 15298 (Part 1), the cut growth shall not be greater than 4 mm before 30 000 cycles.)	-	600	EXCLUDING 18% GST
Cl.6.3 Tear Strength of Compact Outsole( When outsoles are tested in accordance to 8.2 of IS 15298 (Part 1), the tear strength shall be not less than 8 kN/m for material having density higher than 0.9/cm³ and when density of material is less than or equal to 0.9 g/cm³, tear strength shall not be less than 5 kN/m.)	-	420	EXCLUDING 18% GST
Cl.6.4 Resistance to Hot Contact( — Sole Heel When sole heel is tested in accordance with 8.7 of IS 15298 (Part 1), the material shall not melt/deform and shall not develop any cracks when bent around the mandrel.)	-	400	EXCLUDING 18% GST
Cl.6.5 Hydrolysis( When bottom sole or other components are made out of polyurethane, the same shall be tested in accordance with 8.5 of IS 15298 (Part 1) and the same shall comply with 5.8.5 of IS 15298 (Part 2).)	-	600	EXCLUDING 18% GST

-
-

204

IS 1989 : Part 2 (1986)

Specification for leather safety boots and shoes: Part 2 for heavy metal industries (Fourth Revision)

11500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(a) Upper Leather)	-	2450	EXCLUDING 18% GST
8(b) Lining Leather)	-	3950	EXCLUDING 18% GST
8(c) Bottom Material)	-	1920	EXCLUDING 18% GST
8(d) Steel Toe Cap)	-	760	EXCLUDING 18% GST
8(f) Bottom Filling)	-	2970	EXCLUDING 18% GST
8(g) Eyelet)	-	360	EXCLUDING 18% GST
8(k) Screw Wire)	-	1040	EXCLUDING 18% GST
16(Finish)	-	120	EXCLUDING 18% GST
8(n) Laces)	-	1090	EXCLUDING 18% GST
10(Finish)	-	120	EXCLUDING 18% GST
8(c) Bottom Material)	-	1920	EXCLUDING 18% GST
8(g) Eyelet)	-	360	EXCLUDING 18% GST

-
-

205

IS 1989 : Part 1 (1986)

Specification for leather safety boots and shoes: Part 1 for miners (Fourth Revision)

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1(Design)	-	120		EXCLUDING GST 18%

-
-

206

IS 15392 (2003)

Aluminium and aluminium alloy bare foil for food packaging - Specification

5500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 5 Table 1(PINHOLE COUNT)	-	350	10% Discount on BIS sample.
Clause 6(FREEDOM FROM DEFECTS)	-	120	10% Discount on BIS sample.
Clause 7 Sub-Clause 7.1(Material)	-	4000	10% Discount on BIS sample.
Clause 10 Table 2(Preferred Thickness)	-	120	10% Discount on BIS sample.
Clause 12(Dimension and Tolerances: I) Width)	-	120	10% Discount on BIS sample.
Clause 12(Dimension and Tolerances: 2) Length)	-	120	10% Discount on BIS sample.
Clause 14(Surface condition)	-	500	10% Discount on BIS sample.

-
-

207

IS 15298 : Part 3 (2019)

Personal protective equipment: Part 3 protective footwear (Second Revision)

52000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.2 Table-2(Height of upper)	-	120	10% Discount on BIS sample.
5.2.3 Table-2(Seat Region)	-	120	10% Discount on BIS sample.
5.3.1.1 Table-2(Construction)	-	120	10% Discount on BIS sample.
5.3.1.2 Table-2(Upper/Outsole Bond)	-	720	10% Discount on BIS sample.
5.3.2.2 Table-2(Internal Length of toe cap)	-	200	10% Discount on BIS sample.
5.3.2.1 Table-2(General)	-	200	10% Discount on BIS sample.
5.3.2.3 Table-2(Impact Resistance -T- )	-	400	10% Discount on BIS sample.
5.3.2.4 Table-2(Compression)	-	400	10% Discount on BIS sample.
5.3.3 Table-2(Leak Proofness)	-	300	10% Discount on BIS sample.
5.3.4 Table-2(Specific Ergonomic)	-	600	10% Discount on BIS sample.
5.3.5.2 Table-2(Slip Resistance SRA)	-	1500	10% Discount on BIS sample.
5.4.1 Table-2(General)	-	120	10% Discount on BIS sample.
5.4.2 Table-2(Thickness)	-	120	10% Discount on BIS sample.
5 4 3 Table-2(Tear Strength)	-	420	10% Discount on BIS sample.
5.4.4 Table-2(Tensile Properties)	-	420	10% Discount on BIS sample.
5.4.5 Table-2(Flexing Resistance)	-	600	10% Discount on BIS sample.
5.4.6 Table-2(Water Vapour Permeability & Coefficient)	-	420	10% Discount on BIS sample.
5 4.7 Table-2( )	-	420	10% Discount on BIS sample.
5 4.8 Table-2(Hydrolysis)	-	3000	10% Discount on BIS sample.
5.4 9 Table-2(Chrome VI)	-	720	10% Discount on BIS sample.
5.5.1 Table-2(Tear Strength)	-	420	10% Discount on BIS sample.
5.5.2 Table-2(Abrasion Resistance)	-	900	10% Discount on BIS sample.
5.5.3 Table-2(Water Vapour Permeability & Coefficient)	-	420	10% Discount on BIS sample.
5.5.4 Table-2(pH Value)	-	180	10% Discount on BIS sample.
5.5.5 Table-2(Chrome VI)	-	720	10% Discount on BIS sample.
6.2.1 Table-I8(Penetration Resistance)	-	420	10% Discount on BIS sample.
6.2.2.1 Table-18(Electrical Properties)	-	420	10% Discount on BIS sample.
Table-18(Conductive Footwear)	-	3000	10% Discount on BIS sample.
6.2.2.2 Table-18(Antistatic Footwear)	-	3000	10% Discount on BIS sample.
6.2.2.3 Table-18(Electrically Insulated)	-	3000	10% Discount on BIS sample.
6.2.3.1 Table-18(Heat Insulated Comp)	-	600	10% Discount on BIS sample.
6.2.3.2 Table-18(Cold Insulated)	-	600	10% Discount on BIS sample.
6.2.4 Table-18(Energy Absorption of seat region)	-	420	10% Discount on BIS sample.
6.2.5 Table-18(Water Resistance)	-	300	10% Discount on BIS sample.
6.2.7 Table-18(Ankle Protection)	-	800	10% Discount on BIS sample.
6.3 Table-18(Water Penetration & Absorption)	-	720	10% Discount on BIS sample.
6.2.8 Table-18(Cut Resistance)	-	1000	10% Discount on BIS sample.
6.4.1 Table-18(Resistance to Hot Contact)	-	300	10% Discount on BIS sample.

-
-

208

IS 4148 (1989)

Surgical rubber gloves - Specification (First Revision)

11500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Dimensions Fig 1 and Table 1)	-	1000	10% Discount on BIS Sample.
4.3(Thickness)	-	500	10% Discount on BIS Sample.
4.4.1(Physical Properties)	-	2500	10% Discount on BIS Sample.
4.4.3(After heat ageing in autoclave)	-	2500	10% Discount on BIS Sample.
4.4.4(Tension Set)	-	1000	10% Discount on BIS Sample.
4.5(pH of Aqueous Extract )	-	500	10% Discount on BIS Sample.

-
-

209

IS 8521 : Part 1 (1977)

Specification for industrial safety face shields: Part 1 with plastics visor

5625 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 4(Visual and Dimensional Examination & Physical Requirements (Impact Resistance, Penetration Resistance, Visible Transmittance, Flammability & Disinfection))	-	10000		EXCLUDING GST 18%

-
-

210

IS 16289 (2014)

Medical textiles - Surgical face masks - Specification

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(Materials and Construction)	-	500	10% Discount on BIS sample.
4.1.2(Design)	-	500	10% Discount on BIS sample.
4.2 Table 1 i)(Bacterial Filtration Efficiency)	-	8000	10% Discount on BIS sample.
4.2 Table 1 ii)(Differential Pressure)	-	5000	10% Discount on BIS sample.
4.2 Table 1 iii)(Splash Resistance)	-	6000	10% Discount on BIS sample.
4.2 Table 1 iv)(Sub-micron particulate filtration efficiency at 0.1 µ)	-	10000	10% Discount on BIS sample.
4.1.1(Materials and Construction)	-	0	NA
4.1.2(Design)	-	0	NA
4.2 Table 1 i)(Bacterial Filtration Efficiency)	-	0	NA
4.2 Table 1 ii)(Differential Pressure)	-	0	NA
4.2 Table 1 iii)(Splash Resistance)	-	0	NA
4.2 Table 1 iv)(Sub-micron particulate filtration efficiency at 0.1 µ)	-	0	NA
Cl 4.1.1(Materials and Construction)	-	0	NA
Cl 4.1.2(Design)	-	0	NA
Cl 4.2 and Table-1(Diffirential Pressure)	-	0	NA
Cl 4.2 and Table-1(Splash Resistance)	-	0	NA

-
-

Bureau of Indian Standards

The National Standards Body of India

Sleen India Biz venture Private Limited, Agra

RAHANKALAN ROAD, PART 295, BLOCK-A KUBERPUR, 300 METER FROM RAILWAY CROSSING CHALESHAR ROAD, Agra, Uttar Pradesh, India, 282006, Agra, Agra, Uttar Pradesh, 282006

8193022228 sleen.info@gmail.com

Scope List