BIS - LIMS (Laboratory Information Management System)

Stellar Test House, Noida

G-68, Sector-63, Noida, Gautam Buddha Nagar, Uttar Pradesh, 201301

8130190099 ankit@stellartesthouse.com

Scope List

Reset

77 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 3087 (2025)

Medium Density Particle Boards of Wood and other Lignocellulosic Materials for General Purpose - Specification ( Third Revision )

All Grade / Type / Size / Designation

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 7(Finish --IS 2380 (Part 2), IS 2380 (Part 3) & Visual)	-	500	-
As per Clause 8, Table 2(Length -IS 2380 (Part 2))	-	500	-
As per Clause 8, Table 2(Width - IS 2380 (Part 2))	-	500	-
As per Clause 8, Table 2(Thickness, Sanded/finished panel - IS 2380 (Part 2))	-	500	-
As per Clause 8, Table 2(Squareness, Max. - IS 2380 (Part 2))	-	300	-
As per Clause 8, Table 2(Edge straightness, Max. -IS 2380 (Part 2))	-	200	-
As per Clause 9.1 Table 3(Density -IS 2380 (Part 3))	-	500	-
As per Clause 9.1 Table 3(Variation from mean density, --IS 2380 (Part 3))	-	0	-
As per Clause 9.1 Table 3(Moisture Content -IS 2380 (Part 3))	-	500	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of rupture (MoR), Min.-IS 2380 (Part 4))	-	1000	-
As per Clause 9.1 Table 4, Table 6, Table 7(Modulus of elasticity (MoE), Min. -(IS 2380 (Part 4))	-	1000	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table7(Internal bond strength, Min. - IS 2380 (Part 5))	-	1000	-
As per Clause 9.1 Table 6, Table 7(24 h thickness swelling (due to general absorption) Max. - IS 2380 (Part 17))	-	500	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Screw withdrawal strength (face) , Min. -IS 2380 (Part 4))	-	500	-
As per Clause 9.1 Table 4, Table 5, table 6, Table 7(Screw withdrawal strength (edge) , Min. -IS 2380 (Part 4))	-	500	-
As per Clause 9.1 , Table 6, Table 7(Moisture Resistance : Option 1 : Cyclic test (1. )Internal bond strength Min. -IS 2380 (Part 5) see note 1)	-	1000	-
As per Clause 9.1 , Table 6, Table 7(Moisture Resistance : Option 2 : Boil test (1.) Internal bond strength , Min.- IS 2380 (Part 5) see note 2)	-	500	-
As per Clause 9.1 , Table 9(Formaldehyde content Fc, mg/100 g for oven dry board -IS 13745)	-	1000	-
As per Clause 9.1 , Table 9(Steady-state formaldehyde emission, Fc, mg/m3 (optional test))	-	1000	-

26 Sep, 2028

-
Included w.e.f. 24.03.2026

IS 302 : PART 1 (Massage Appliances)

Massage Appliances

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
(CI. 6 IS 302-2-32 : 1994(Classification)	-	500	-
Cl. 7 302-2-32 : 1994(Marking)	-	500	-
Cl. 8 302-2-32 : 1994(Starting of motor operated appliances)	-	1000	-
Cl. 9 302-2-32 : 1994(Protection Against Electric Shock)	-	1000	-
Cl. 10 302-2-32 : 1994(Power Input and Current)	-	1000	-
Cl. 11 302-2-32 : 1994(Temperature Rise)	-	1000	-
Cl. 13 302-2-32 : 1994(Leakage Current & Electric Strength at Operating Temperature)	-	1000	-
Cl. 14 302-2-32 : 1994(Radio and television interference suppression / Transient over voltages)	-	1000	-
Cl. 15 302-2-32: 1994(Moisture Resistance Test)	-	1000	-
Cl. 16 302-2-32 : 1994(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	1000	-
Cl. 17 302-2-32 : 1994(Overload Protection of Transformers and Associated Circuit)	-	1000	-
Cl. 18 302-2-32 : 1994(Endurance)	-	1000	-
Cl. 19 302-2-32 : 1994(Abnormal Operation)	-	1000	-
Cl. 20 302-2-32 : 1994(Stability & Mechanical Hazards)	-	1000	-
Cl. 21 302-2-32 : 1994(Mechanical strength)	-	1000	-
Cl. 22 302-2-32 : 1994(Construction)	-	1000	-
Cl. 23 302-2-32 : 1994(Internal Wiring)	-	1000	-
Cl. 24 302-2-32 : 1994(Components)	-	1000	-
Cl. 25 302-2-32 : 1994(Supply Connection & External Flexible Cords)	-	1000	-
Cl. 26 302-2-32 : 1994(Terminals for External conductors)	-	1000	-
Cl. 27 302-2-32 : 1994(Provision for Earthing)	-	1000	-
Cl. 28 302-2-32 : 1994(Screws & Connections)	-	1000	-
Cl. 29 302-2-32 : 1994(Clearances, Creepage Distances & Solid insulation)	-	1000	-
Cl. 30 302-2-32 : 1994(Resistance to Heat Fire & Tracking)	-	1000	-
Cl. 31 302-2-32 : 1994(Resistance to Rusting)	-	1000	-
Cl. 32 302-2-32 : 1994(Radiation Hazards)	-	1000	-

26 Sep, 2028

-
-

IS 302 : PART 1 (Commercial Electric Dishwashing Machines)

Commercial Electric Dishwashing Machines

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classifications)	-	500	-
5(General conditions for tests)	-	500	-
4(General Requirement)	-	500	-
11.8(Temperature rise)	-	1000	-
11.7(Duration corresponding)	-	1000	-
11.6(Combined appliances)	-	1000	-
11.5(Motor-operated appliances)	-	1000	-
11.4(Heating appliances)	-	1000	-
8.1.5(Live parts of built-in appliances)	-	1000	-
18(Endurance)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
16(Leakage current and electric strength)	-	1000	-
4(General requirement)	-	500	-
32(Radiation Toxicity and Similar Hazards)	-	1000	-
31(Resistance to Rusting)	-	1000	-
30.2(Needle Flame Test)	-	1000	-
30.2(Glow Wire Test)	-	1000	-
30.1(Ball pressure test)	-	1000	-
29(clearance, creepage distances and solid insulation)	-	1000	-
28(Screw test and connections)	-	1000	-
27(Provision for earthing)	-	1000	-
26(Terminals for external conductors)	-	1000	-
25(Supply connection and external flexible cords)	-	1000	-
24(Components)	-	1000	-
23(General)	-	1000	-
22(Construction verification related test)	-	1000	-
21(Mechanical Strength Test)	-	1000	-
20(Stability test)	-	1000	-
19(Abnormal Operation)	-	1000	-
18(Endurance Test requirements and tests)	-	1000	-
17(Over Load Protection of Transformers and associated circuits)	-	1000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	1000	-
16.2(Leakage Current (after Clause 15))	-	1000	-
16.1(General)	-	1000	-
16.0(General)	-	1000	-
15.3(Humidity Test)	-	1000	-
15.2(Spillage Test)	-	1000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	1000	-
15.0(General)	-	1000	-
14(Transient Over Voltages)	-	1000	-
13.3(Electric Strength at operating temperature)	-	1000	-
13.2(Leakage current at operating temperature)	-	1000	-
13.1(General)	-	1000	-
11.3(Heating)	-	1000	-
11.2(General)	-	1000	-
11.1(General)	-	1000	-
10.2(Current input)	-	1000	-
10.1(Power input)	-	1000	-
9(Starting of motor operation test requirements and tests)	-	1000	-
8.1.4(Protection against live parts against protective impedance)	-	1000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	1000	-
8.1.2(Protection against live parts in openings)	-	1000	-
8.1.1(Protection against live parts in all positions)	-	1000	-
7(Marking and instructions)	-	500	-

26 Sep, 2028

-
-

IS 302 : PART 1 (Dishwashers)

Dishwashers

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classifications)	-	500	-
5(General conditions for tests)	-	500	-
4(General Requirement)	-	500	-
11.8(Temperature rise)	-	1000	-
11.7(Duration corresponding)	-	1000	-
11.6(Combined appliances)	-	1000	-
11.5(Motor-operated appliances)	-	1000	-
11.4(Heating appliances)	-	1000	-
8.1.5(Live parts of built-in appliances)	-	1000	-
18(Endurance)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
16(Leakage current and electric strength)	-	1000	-
4(General requirement)	-	500	-
32(Radiation Toxicity and Similar Hazards)	-	1000	-
31(Resistance to Rusting)	-	1000	-
30.2(Needle Flame Test)	-	1000	-
30.2(Glow Wire Test)	-	1000	-
30.1(Ball pressure test)	-	1000	-
29(clearance, creepage distances and solid insulation)	-	1000	-
28(Screw test and connections)	-	1000	-
27(Provision for earthing)	-	1000	-
26(Terminals for external conductors)	-	1000	-
25(Supply connection and external flexible cords)	-	1000	-
24(Components)	-	1000	-
23(General)	-	1000	-
22(Construction verification related test)	-	1000	-
21(Mechanical Strength Test)	-	1000	-
20(Stability test)	-	1000	-
19(Abnormal Operation)	-	1000	-
18(Endurance Test requirements and tests)	-	1000	-
17(Over Load Protection of Transformers and associated circuits)	-	1000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	1000	-
16.2(Leakage Current (after Clause 15))	-	1000	-
16.1(General)	-	1000	-
16.0(General)	-	1000	-
15.3(Humidity Test)	-	1000	-
15.2(Spillage Test)	-	1000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	1000	-
15.0(General)	-	1000	-
14(Transient Over Voltages)	-	1000	-
13.3(Electric Strength at operating temperature)	-	1000	-
13.2(Leakage current at operating temperature)	-	1000	-
13.1(General)	-	1000	-
11.3(Heating)	-	1000	-
11.2(General)	-	1000	-
11.1(General)	-	1000	-
10.2(Current input)	-	1000	-
10.1(Power input)	-	1000	-
9(Starting of motor operation test requirements and tests)	-	1000	-
8.1.4(Protection against live parts against protective impedance)	-	1000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	1000	-
8.1.2(Protection against live parts in openings)	-	1000	-
8.1.1(Protection against live parts in all positions)	-	1000	-
7(Marking and instructions)	-	1000	-

26 Sep, 2028

-
-

IS 2202 : Part 1 (2023)

WOODEN FLUSH DOOR SHUTTERS SOLID CORE TYPE SPECIFICATION PART 1 PLYWOOD FACE PANELS Seventh Revision

All Grade / Type / Size / Designation

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.1(Workmanship & Finish)	-	0	-
9.2(Workmanship & Finish)	-	500	-
9.3(Workmanship & Finish)	-	0	-
11.1(Dimensions - Height)	-	500	-
11.1(Dimensions - Width)	-	500	-
11.1(Dimensions - Thickness)	-	500	-
11.1(Dimensions - Variation in thickness)	-	0	-
11.1(Dimensions - Squareness)	-	500	-
11.12(End immersion test)	-	1000	-
11.13(Knife Test)	-	1000	-
11.14(Glue Adhesion Test)	-	1000	-
4(GRADE)	-	0	-
4(TYPE)	-	0	-
5(SIZES)	-	0	-
7.1.1(CONSTRUCTION-Blockboard Core)	-	0	-
7.1.1(CONSTRUCTION-Blockboard Core)	-	0	-
7.1.2(CONSTRUCTION-Blockboard Core)	-	0	-
7.3.2(CONSTRUCTION-Stiles and Rails)	-	0	-
7.3.2(a)(CONSTRUCTION-Stiles and Rails-Joints)	-	0	-
7.3.2(b)(CONSTRUCTION-Stiles and Rails-Joints)	-	0	-
7.3.2(c)(CONSTRUCTION-Stiles and Rails-Joints)	-	0	-
7.3.3(CONSTRUCTION-Stiles and Rails)	-	0	-
9.1(WORKMANSHIP AND FINISH)	-	0	-
9.2(WORKMANSHIP AND FINISH)	-	0	-
9.3(WORKMANSHIP AND FINISH)	-	0	-
11.1(Dimensions and Squareness Test)	-	500	-
11.1(Dimensions and Squareness Test)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.2(General Flatness Test)	-	500	-
11.2(General Flatness Test)	-	0	-
11.2(General Flatness Test)	-	0	-
11.3(Local Planeness Test)	-	500	-
11.4(Impact Indentation Test)	-	500	-
11.4(Impact Indentation Test)	-	0	-
11.5(Flexure Test)	-	1000	-
11.5(Flexure Test)	-	1000	-
11.6(Edge Loading Test)	-	1000	-
11.6(Edge Loading Test)	-	0	-
11.6(Edge Loading Test)	-	0	-
11.6(Edge Loading Test)	-	0	-
11.7.1(Shock Resistance Test)	-	1000	-
11.7.2(Shock Resistance Test)	-	0	-
11.8(Buckling Test)	-	1000	-
11.8(Buckling Test)	-	0	-
11.8(Buckling Test)	-	0	-
11.9.2(Slamming Test)	-	1000	-
11.9.3(Slamming Test)	-	0	-
11.10(Misuse Test)	-	500	-
11.11(Varying Humidity Test)	-	1000	-
11.11(Varying Humidity Test)	-	0	-
11.12(End Immersion Test)	-	500	-
11.13(Knife Test)	-	500	-
11.14(Glue Adhesion Test)	-	500	-
11.15(Screw Withdrawal Resistance Test)	-	1000	-
11.15(Screw Withdrawal Resistance Test)	-	0	-
Clause 4.2(grades specified)	-	0	-
Clause 5(SIZES)	-	0	-
Clause 6.1.1(species of timber)	-	0	-
Clause 6.1.2(list of species)	-	0	-
Clause 6.1.3(moisture content)	-	0	-
Clause 6.2.1(Plywood)	-	0	-
Clause 6.2.2(Decorative plywood)	-	0	-
Clause 6.3(Cross-Bands)	-	0	-
Clause 6.4.1(Commercial Face Veneers)	-	0	-
Clause 6.4.2(Decorative Face Veneers)	-	0	-
Clause 6.6.1(Adhesives)	-	0	-
Clause 6.7(Particle Board)	-	0	-
Clause 6.8(Medium density fibre board)	-	0	-
Clause 6.9(Alternative Materials)	-	0	-
Clause 7.1(Blockboard Core)	-	0	-
Clause 7.2(Particle Board or Medium Density Fibre)	-	0	-
Clause 7.3(Stiles and Rails)	-	0	-
Clause 7.4(Levelling)	-	0	-
Clause 7.5(Face Panel)	-	0	-
Clause 7.6(Lipping)	-	0	-
Clause 7.7(Rebating)	-	0	-
Clause 7.8(Opening for Glazing)	-	0	-
Clause 7.9(Venetian)	-	0	-
Clause 8.1(Locks)	-	0	-
Clause 9(WORKMANSHIP AND FINISH)	-	0	-
Clause 10.1(Classification of Tests)	-	0	-
Clause 11.1(Dimensions and Squareness Test)	-	0	-
Clause 11.2(General Flatness Test)	-	0	-
Clause 11.3(Local Planeness Test)	-	0	-
Clause 11.4(Impact Indentation Test)	-	0	-
Clause 11.5(Flexure Test)	-	0	-
Clause 11.6(Edge Loading Test)	-	0	-
Clause 11.7(Shock Resistance Test)	-	0	-
Clause 11.8(Buckling Resistance Test)	-	0	-
Clause 11.9(Slamming Test)	-	0	-
Clause 11.10(Misuse Test)	-	0	-
Clause 11.11(Varying Humidity Test)	-	0	-
Clause 11.12(End Immersion Test)	-	0	-
Clause 11.13(Knife Test)	-	0	-
Clause 11.14(Glue Adhesion Test)	-	0	-
Clause 11.15(Screw Withdrawal Resistance Test)	-	0	-
Clause 12(SAMPLING AND CRITERIA FOR CONFORMITY)	-	0	-
Clause 13(ADDITIONAL REQUIREMENTS FOR ECO MARK)	-	0	-
Clause 14(Marking)	-	0	-
4(Grade, Type and Construction)	-	0	-
5(Sizes and Thickness)	-	0	-
6.1(Timber)	-	0	-
6.2(Plywood for flush door shutter)	-	0	-
6.3(Cross-Bands )	-	0	-
6.4.1(Commercial Face Veneers)	-	0	-
6.4.2(Decorative face veneers)	-	0	-
6.6(Adhesives)	-	0	-
6.7(Particle Board)	-	0	-
6.8(Medium Density Fibre)	-	0	-
6.9(Alternative Materials)	-	0	-
7(Construction)	-	0	-
8.1(Locks)	-	0	-
8.2(Other Fittings)	-	0	-
9(Workmanship and Finish)	-	0	-
10(Tests)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.2(General Flatness Test)	-	0	-
11.3(Local Planeness Test)	-	0	-
11.4(Impact Indentation Test)	-	0	-
11.5(Flexure Test)	-	0	-
11.6(Edge Loading Test)	-	0	-
11.7(Shock Resistance Test)	-	0	-
11.8(Buckling Resistance Test)	-	0	-
11.9(Slamming Test)	-	0	-
11.1(Misuse Test)	-	0	-
11.11(Varying Humidity Test)	-	0	-
11.12(End Immersion Test)	-	0	-
11.13(Knife Test)	-	0	-
11.14(Glue Adhesion Test)	-	0	-
11.15(Screw Withdrawal Resistance Test)	-	0	-
14(Marking )	-	0	-
Cl-13(ADDITIONAL REQUIREMENTS FOR ECO MARK)	-	0	-

26 Sep, 2028

-
Included w.e.f 17.03.2026

IS 710 (2024)

MARINE PLYWOOD - SPECIFICATION (Third Revision)

All types & Grades

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Timber)	-	0	-
Cl-4.2(Adhesive)	-	500	-
Cl-5.1(Veneers)	-	0	-
Cl-5.2.1(Glueing)	-	0	-
Cl -5.2.2(Thickness of Veneers)	-	500	-
Cl - 5.2.3.1(Joint in Veneers)	-	0	-
Cl - 5.2.3.2(Edge joints)	-	0	-
Cl - 5.2.3.3(End joints)	-	0	-
Cl - 5.2.3.4(Scarf joints)	-	0	-
Cl - 5.2.4(Grain Direction)	-	0	-
Cl-5.3(Treatment)	-	0	-
Cl-5.4(Moisture Content)	-	1000	-
Cl-6.1(Dimensions (length))	-	500	-
Cl-6.2(Thickness)	-	500	-
Cl-6.3(Squareness)	-	500	-
Cl-7.1, 7.2, 7.3, 7.4, 7.5 & 7.6(Workmanship and finish)	-	500	-
Cl-9.3(Moisture Content)	-	1000	-
Cl-9.4.2(Glue Adhesion in Dry State- Adhesion of Plies)	-	1000	-
Cl-9.4.1(Glue Adhesion in Dry State- Glue Shear Strength -Average)	-	1000	-
Cl-9.5.1.1(Glue Adhesion in Water Resistance - Glue Shear Strength -Average)	-	1000	-
Cl-9.5.1.2(Water Resistance Test-Adhesion of plies)	-	1000	-
Cl-9.5.2(Water Resistance Test)	-	1000	-
Cl-9.6(Tensile Strength-Along the grain)	-	1000	-
Cl-9.7(Mycological Test -Adhesion)	-	1000	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1000	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1000	-
Cl-9.9, Table-3 (i) a((Modulus of Elasticity: Across the Face Grain: Average) Wet Bending)	-	1000	-
Cl-9.9, Table-3 (i) b((Modulus of Elasticity: Across the Face Grain: Minimum Individual) Wet Bending)	-	1000	-
Cl-9.4.2(Adhesion of Plies)	-	10000	-
5.1.1(Defects in veneers)	-	5000	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	1000	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	1000	-
Cl-9.9, Table-3 (ii) a((Modulus of Rupture: Across the Face Grain: Average) Wet Bending)	-	1000	-
Cl-9.9, Table-3 (ii) b((Modulus of Rupture: Across the Face Grain: Minimum Individual) Wet Bending)	-	1000	-
Cl-6.1(Dimensions (width))	-	500	-
Cl-8.3(Edge Straightness)	-	500	-
Cl-9.4.1(Glue Adhesion in Dry State- Glue Shear Strength –Minimum Individual)	-	1000	-
Cl-9.5.1.1(Glue Adhesion in Water Resistance - Glue Shear Strength –Minimum Individual)	-	1000	-
Cl-9.6(Tensile Strength-Across the grain)	-	1000	-
Cl-9.7(Glue Adhesion in Mycological test - Glue Shear Strength –Minimum Individual)	-	1000	-
Cl-9.7(Glue Adhesion in Mycological test - Glue Shear Strength -Average)	-	1000	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	1000	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	1000	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	1000	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	1000	-
Cl-11.1(Marking)	-	0	-
Cl-11.3(Marking)	-	0	-
Cl-9.10(Retention of Preservative)	-	1000	-
Cl-9.11(Formaldehyde Content Test)	-	1500	-
Cl-9.12(Steady-State Formaldehyde Emission Test)	-	15000	-

26 Sep, 2028

-
Included w.e.f 24.02.2026

IS 4990 (2024)

PLYWOOD FOR CONCRETE SHUTTERING WORKS SPECIFICATION (Fourth Revision)

All Grade & Type

23000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Timber)	-	0	-
Cl-5.2(Adhesives for Bonding of Veneers)	-	0	-
Cl-6.1(Manufacture)	-	0	-
Cl-6.2(Manufacture ( Thickness of veneers))	-	500	-
Cl-6.3(Manufacture ( Physical and mechanical properties of veneers))	-	0	-
Cl-6.4, 6.7(Manufacture (Plywood for concrete shuttering))	-	0	-
Cl-6.5(Manufacture (Scarf joints))	-	500	-
Cl-6.6(Manufacture ( Preservative treatment))	-	0	-
Cl-7.1(Dimensions -length)	-	500	-
Cl-7.2(Thickness)	-	500	-
Cl-7.3(Squareness)	-	500	-
Cl-8.1, 8.2(Workmanship and finish)	-	500	-
Cl-10.3(Moisture Content)	-	600	-
Cl-10.4.1(Glue Adhesion in Dry State - Glue Shear Strength-WOOD FAILURE, Average)	-	500	-
Cl-10.4.2(Glue Adhesion in Dry State - Adhesion of Plies)	-	500	-
Cl-10.5, 10.5.1(Resistance to water test- glue shear strength- WOOD Failure, Average)	-	1000	-
Cl-10.5.1.1(Water Resistance Test-Glue shear strength)	-	1000	-
Cl-10.5.1.2(Water Resistance Test-Adhesion of plies)	-	1000	-
Cl-10.5.2(Water Resistance Test (Alternate method))	-	1500	-
Cl-10.6(Water resistance test (Concrete shuttering Plywood))	-	1000	-
Cl-10.7.1, Table-2(Mycological Test- Glue shear strengt)	-	1000	-
Cl-10.7.2(Mycological Test- Adhesion of plies)	-	1000	-
Cl-10.8(Tensile Strength)	-	1000	-
Cl-10.9, Table-3 (i)(Along (parallel to the grain direction of the face veneer))	-	1000	-
Cl-10.9, Table-3 (ii)(Across (perpendicular to the grain direction of the face veneer))	-	1000	-
Cl-10.10, Table-4 (i) a((Modulus of Elasticity: Across the Face Grain: Average) Wet Bending)	-	800	-
Cl-10.10, Table-4 (i) b((Modulus of Rupture: Across the Face Grain: Minimum Individual) Wet Bending)	-	800	-
Cl-10.10, Table-4 (ii) a(Wet Bending Strength:- Modulus of Rupture: Across the Face Grain: Average))	-	800	-
Cl-10.10, Table-4, (ii) b(Wet Bending Strength; (Modulus of Rupture: Along the Face Grain: Minimum Individual))	-	800	-
Cl-10.4.1, 10.5.1.1 and 10.7.1, Table-2(Average Wood Failure)	-	0	-
Cl-10.4.1, 10.5.1.1 and 10.7.1, Table-2(Average Failure Load, N -Dry State)	-	0	-
Cl-10.4.1, 10.5.1.1 and 10.7.1, Table-2(Average Failure Load, N- Resistance to Water)	-	0	-
Cl-10.4.1, 10.5.1.1 and 10.7.1, Table-2(Average Failure Load, N - Resistance to Micro-Organisms)	-	0	-
Cl-10.8 (a)(Tensile strength)	-	1000	-
Cl-10.8 (b)(Tensile strength)	-	1000	-
Cl-10.8 (c)(Tensile strengths in both directions)	-	1000	-
Cl-7.1(Dimensions (width))	-	200	-
Cl-7.3(Edge Straightness)	-	200	-
Cl-10.12(Formaldehyde Content Test)	-	1500	-
Cl-10.13(Steady-State Formaldehyde Emission Test)	-	1000	-
Cl-10.11(Retention of Preservative)	-	1000	-

26 Sep, 2028

-
Included w.e.f 24.02.2026

IS 5509 (2021)

Fire Retardant Plywood - Specification ( Third Revision )

All type & Grade

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.3 (Table 1)(b) 6 mm and above)	-	500	-
4.1(Flame retardant chemicals)	-	500	-
4.2(Flame retardant and preservative treatment)	-	500	-
4.3(Treatment)	-	400	-
6.1.1(Treatment of Plywood by Pressure Impregnation after Manufacture)	-	400	-
6.1.2(Soaking Treatment)	-	400	-
6.2(Choice of Treatment)	-	400	-
7(CONDITIONING AFTER TREATMENT)	-	400	-
8.1(Dimensions)	-	1000	-
8.2(Thickness)	-	500	-
8.3, Taable-1 (i)(Tolerance- Length)	-	500	-
9(WORKMANSHIP AND FINISH)	-	500	-
10(SAMPLING AND CRITERIA FOR CONFORMITY)	-	200	-
11 (a)(For flammability)	-	1200	-
11 (b)(For flame penetration)	-	1200	-
11 (c)(For rate of burning)	-	1200	-
12.1 Table - 2 (i)(Moisture content, percent, Max)	-	500	-
12.1 Table - 2 (ii)(Flammability (see Note 1), minutes, Min)	-	1200	-
12.1 Table - 2 (iii)(Flame penetration (see Note 2), minutes, Min)	-	1200	-
12.1 Table - 2 (iv)(Rate of burning (see Note 3), minutes, Min)	-	1200	-
12.2(Other Tests)	-	500	-
14(Marking)	-	500	-
Cl-13(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	300	-
Cl-8.3, Table-1 (ii)(Tolerances-Width)	-	400	-
Cl-8.3, Table-1 (iii)(Tolerances- Thickness)	-	400	-
Cl-8.3, Table-1 (iv)(Edge straightness)	-	400	-
Cl-8.3, Table-1 (v)(Squareness,)	-	400	-
5(PREPARATION FOR TREATMENT)	-	400	-

26 Sep, 2028

-
Included w.e.f 17.03.2026

IS 1328 (2025)

Veneered Decorative Plywood - Specification ( Fourth Revision )

All type & Grade

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4.1(Grades)	-	500	-
Cl 4.2(Type)	-	500	-
Cl 4.3(Formaldehyde Class)	-	500	-
Cl 5.2(Adhesive)	-	500	-
Cl 7.1(Surface Requirements- For Type 1)	-	200	-
Cl 7.2(Surface Requirements- For Type 2)	-	200	-
Cl 7.3(Surface Requirements- For Type 3)	-	200	-
Cl 7.4(Surface Requirements- For Type 4)	-	200	-
Cl 8.1(Dimensions (Length and Width))	-	500	-
Cl 8.2(Dimensions (Thickness))	-	500	-
Cl 8.3(Squareness and Edge Straightness as Per Annex B)	-	500	-
Cl 8.4- Table 1(Tolerances)	-	200	-
Cl 11.3(Moisture Content)	-	500	-
Cl 11.4.1(a)(Water Resistance Test( For MR Grade))	-	1000	-
Cl 11.4.1(b)(Water Resistance Test( For BWR Grade))	-	1000	-
Cl 11.4.1(c)(Water Resistance Test( For BWP Grade))	-	1000	-
Cl 12(Marking)	-	200	-
Cl 11.5(Formaldehyde Content Test)	-	1000	-
Cl 11.6(Steady - State Formaldehyde Emission Test ( Optional Test))	-	1000	-

26 Sep, 2028

-
Included w.e.f 17.02.2026

IS 848 (2025)

Synthetic Resin Adhesives for Plywood (Phenolic, Aminoplastic and Bio-Materials Based) - Specification ( Third Revision )

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 4 Table 1(TYPES)	-	500	-
As per Clause 6.6(SETTING TIMES AND CONDITIONS)	-	1000	-
As per Clause 7.3.2 Table 1(i)(Cyclic Test For BWP Type)	-	2000	-
As per Clause 7.3.2 Table 1(ii)(Cyclic Test For BWR Type)	-	2000	-
As per Clause 7.3.2 Table 1(iii)(Cyclic Test For MR Type)	-	2000	-
As per Clause 7.4(Acidity And Alkalinity (pH))	-	1000	-
As per Clause 9(Marking)	-	500	-

26 Sep, 2028

-
Included w.e.f 17.02.2026

IS 428 (2013)

Washable distemper - Specification (Third Revision)

All types and grade

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. ix)(Accelerated storage stability)	-	2000	-
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. vii)(Recoating Properties)	-	1000	-
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. vi)(Residue on sieve, Type 2)	-	1000	-
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. vi)(Residue on sieve, Type 1)	-	1000	-
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. iii)(Finish)	-	500	-
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. ii)(Consistency )	-	1000	-
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. i) b)(Drying Time a) Hard Dry, Type 2)	-	1500	-
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. i) b)(Drying Time a) Hard Dry, Type 1)	-	1500	-
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. i) a)(Drying Time a) Surface Dry, Type 2)	-	1500	-
Cl.6.6(Keeping Proterties)	-	8000	-
Cl.6.3(Application)	-	500	-
Cl.6.2(Thining)	-	500	-
Cl. 6.9.2.2( Chromium VI and its compund (Requirement for Eco-Mark))	-	1500	-
Cl. 6.9.2.2(Cadmium (Requirement for Eco-Mark))	-	1500	-
Cl. 6.9.2.2(Lead (Requirement for Eco-Mark))	-	1500	-
Cl. 6.9.2.1(Volatile organic compounds (Requirement for Eco-Mark))	-	2000	-
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. viii)(Resistance to alkali)	-	1000	-
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. v)(Fastness to light)	-	1000	-
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. iv)(Colour)	-	1000	-
Cl.6.5(Lead Restriction)	-	1500	-
Cl.6.1(Foam and condition)	-	500	-

26 Sep, 2028

-
Included w.e.f 17.02.2026

IS 3854 (2023)

Switches for Domestic and Similar Purposes - Specification (Third Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	500	-
Cl-5(General notes on tests)	-	500	-
Cl-6(Rating)	-	500	-
Cl-7(Classification)	-	500	-
Cl-8(Marking)	-	500	-
Cl-9(Checking of dimensions)	-	500	-
Cl-10.1, 10.2(Prevention of Access to Live Parts)	-	500	-
Cl-10.3(Requirements for Accessible Metal Parts)	-	500	-
Cl-10.4(Requirements for Insulation of the Mechanism)	-	500	-
Cl. 10.5(Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-	500	-
Cl-10.6(Requirements for Switches Operated Indirectly)	-	500	-
Cl-10.7(Requirements for Switches with Replaceable Pull Cord)	-	500	-
Cl-11(Provision for earthing)	-	1000	-
Cl-12(Terminals)	-	1000	-
Cl-13(Constructional requirements)	-	1500	-
Cl-14(Mechanism)	-	1000	-
Cl-15.1(Resistance to Ageing)	-	2000	-
Cl-15.2(Protection Provided by Enclosures of Switches)	-	1000	-
Cl-15.3(Resistance to Humidity)	-	1500	-
Cl-16.1(General)	-	500	-
Cl-16.2(Test for Measuring the Insulation Resistance)	-	1000	-
Cl-16.3(Electric Strength Test)	-	1000	-
Cl-17(Temperature rise)	-	1500	-
Cl-18(Making and breaking capacity)	-	1000	-
Cl-19(Normal operation)	-	1000	-
Cl-20(Mechanical strength)	-	1000	-
Cl-21(Resistance to heat)	-	1000	-
Cl-22(Screws, current carrying parts and connections)	-	1000	-
Cl-23(Creepage distances, clearances and distance through sealing compound)	-	500	-
Cl-24.1(Resistance to abnormal heat and fire)	-	1000	-
Cl-24.2(Resistance to tracking)	-	1000	-
Cl-25(Resistance to rusting)	-	1000	-
19.1(Test for Switches Intended for Inductive Loads)	-	1000	-
19.2(Test for Switches Intended for Externally Ballasted Lamp Loads)	-	1000	-
19.3(Test for Switches Intended for Self-ballasted Lamp Loads)	-	1000	-
13.5(Attachment of knobs)	-	1500	-
12.3.11(Table 11)(Test Current for the Verification of Electrical and Thermal Stresses in Normal Use of Screwless Terminals)	-	1000	-
12.3.12(Table 13)(Deflection Test Forces)	-	1000	-
Cl-4(General Requirements)	-	500	-
Cl-5(General notes on tests)	-	500	-
Cl-6(Rating)	-	500	-
Cl-7(Classification)	-	500	-
Cl-8(Marking)	-	500	-
Cl-9(Checking of dimensions)	-	500	-
Cl-10.1, 10.2(Prevention of Access to Live Parts)	-	500	-
Cl-10.3(Requirements for Accessible Metal Parts)	-	500	-
Cl-10.4(Requirements for Insulation of the Mechanism)	-	500	-
Cl. 10.5(Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-	500	-
Cl-10.6(Requirements for Switches Operated Indirectly)	-	1000	-
Cl-10.7(Requirements for Switches with Replaceable Pull Cord)	-	500	-
Cl-11(Provision for earthing)	-	1000	-
Cl-12(Terminals)	-	1000	-
Cl-13(Constructional requirements)	-	1000	-
Cl-14(Mechanism)	-	1000	-
Cl-15.1(Resistance to Ageing)	-	1000	-
Cl-15.2(Protection Provided by Enclosures of Switches)	-	1000	-
Cl-15.3(Resistance to Humidity)	-	1000	-
Cl-16.1(General)	-	500	-
Cl-16.2(Test for Measuring the Insulation Resistance)	-	500	-
Cl-16.3(Electric Strength Test)	-	1000	-
Cl-17(Temperature rise)	-	1000	-
Cl-18(Making and breaking capacity)	-	1000	-
Cl-19(Normal operation)	-	1000	-
Cl-20(Mechanical strength)	-	1000	-
Cl-21(Resistance to heat)	-	1000	-
Cl-22(Screws, current carrying parts and connections)	-	1000	-
Cl-23(Creepage distances, clearances and distance through sealing compound)	-	500	-
Cl-24.1(Resistance to abnormal heat and fire)	-	1000	-
Cl-24.2(Resistance to tracking)	-	1000	-
Cl-25(Resistance to rusting)	-	1000	-
19.1(Test for Switches Intended for Inductive Loads)	-	1000	-
19.2(Test for Switches Intended for Externally Ballasted Lamp Loads)	-	1000	-
19.3(Test for Switches Intended for Self-ballasted Lamp Loads)	-	1000	-
13.5(Attachment of knobs)	-	500	-
12.3.11(Table 11)(Test Current for the Verification of Electrical and Thermal Stresses in Normal Use of Screwless Terminals)	-	500	-
12.3.12(Table 13)(Deflection Test Forces)	-	500	-
Cl-4(General Requirements)	-	500	-
Cl-5(General notes on tests)	-	500	-
Cl-6(Rating)	-	500	-
Cl-7(Classification)	-	500	-
Cl-8(Marking)	-	500	-
Cl-9(Checking of dimensions)	-	500	-
Cl-10.1, 10.2(Prevention of Access to Live Parts)	-	500	-
Cl-10.3(Requirements for Accessible Metal Parts)	-	500	-
Cl-10.4(Requirements for Insulation of the Mechanism)	-	500	-
Cl. 10.5(Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-	500	-
Cl-10.6(Requirements for Switches Operated Indirectly)	-	1000	-
Cl-10.7(Requirements for Switches with Replaceable Pull Cord)	-	1000	-
Cl-11(Provision for earthing)	-	1000	-
Cl-12(Terminals)	-	1000	-
Cl-13(Constructional requirements)	-	1000	-
Cl-14(Mechanism)	-	1500	-
Cl-15.1(Resistance to Ageing)	-	1000	-
Cl-15.2(Protection Provided by Enclosures of Switches)	-	1000	-
Cl-15.3(Resistance to Humidity)	-	1000	-
Cl-16.1(General)	-	500	-
Cl-16.2(Test for Measuring the Insulation Resistance)	-	500	-
Cl-16.3(Electric Strength Test)	-	1000	-
Cl-17(Temperature rise)	-	1000	-
Cl-18(Making and breaking capacity)	-	1000	-
Cl-19(Normal operation)	-	1000	-
Cl-20(Mechanical strength)	-	1000	-
Cl-21(Resistance to heat)	-	1000	-
Cl-22(Screws, current carrying parts and connections)	-	1000	-
Cl-23(Creepage distances, clearances and distance through sealing compound)	-	500	-
Cl-24.1(Resistance to abnormal heat and fire)	-	1000	-
Cl-24.2(Resistance to tracking)	-	1000	-
Cl-25(Resistance to rusting)	-	1000	-
19.1(Test for Switches Intended for Inductive Loads)	-	1000	-
19.2(Test for Switches Intended for Externally Ballasted Lamp Loads)	-	1000	-
19.3(Test for Switches Intended for Self-ballasted Lamp Loads)	-	1000	-
13.5(Attachment of knobs)	-	1000	-
12.3.11(Table 11)(Test Current for the Verification of Electrical and Thermal Stresses in Normal Use of Screwless Terminals)	-	1000	-
12.3.12(Table 13)(Deflection Test Forces)	-	1000	-
Cl-4(General Requirements)	-	500	-
Cl-5(General notes on tests)	-	500	-
Cl-6(Rating)	-	500	-
Cl-7(Classification)	-	500	-
Cl-8(Marking)	-	500	-
Cl-9(Checking of dimensions)	-	500	-
Cl-10.1, 10.2(Prevention of Access to Live Parts)	-	500	-
Cl-10.3(Requirements for Accessible Metal Parts)	-	500	-
Cl-10.4(Requirements for Insulation of the Mechanism)	-	500	-
Cl. 10.5(Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-	500	-
Cl-10.6(Requirements for Switches Operated Indirectly)	-	1000	-
Cl-10.7(Requirements for Switches with Replaceable Pull Cord)	-	1000	-
Cl-11(Provision for earthing)	-	1000	-
Cl-12(Terminals)	-	1000	-
Cl-13(Constructional requirements)	-	1500	-
Cl-14(Mechanism)	-	1500	-
Cl-15.1(Resistance to Ageing)	-	1000	-
Cl-15.2(Protection Provided by Enclosures of Switches)	-	1000	-
Cl-15.3(Resistance to Humidity)	-	1000	-
Cl-16.1(General)	-	500	-
Cl-16.2(Test for Measuring the Insulation Resistance)	-	1000	-
Cl-16.3(Electric Strength Test)	-	1000	-
Cl-17(Temperature rise)	-	1000	-
Cl-18(Making and breaking capacity)	-	1000	-
Cl-19(Normal operation)	-	1000	-
Cl-20(Mechanical strength)	-	1000	-
Cl-21(Resistance to heat)	-	1000	-
Cl-22(Screws, current carrying parts and connections)	-	1000	-
Cl-23(Creepage distances, clearances and distance through sealing compound)	-	500	-
Cl-24.1(Resistance to abnormal heat and fire)	-	1000	-
Cl-24.2(Resistance to tracking)	-	1000	-
Cl-25(Resistance to rusting)	-	1000	-
19.1(Test for Switches Intended for Inductive Loads)	-	1000	-
19.2(Test for Switches Intended for Externally Ballasted Lamp Loads)	-	1000	-
19.3(Test for Switches Intended for Self-ballasted Lamp Loads)	-	1000	-
13.5(Attachment of knobs)	-	1000	-
12.3.11(Table 11)(Test Current for the Verification of Electrical and Thermal Stresses in Normal Use of Screwless Terminals)	-	1000	-
12.3.12(Table 13)(Deflection Test Forces)	-	1000	-
Cl-4(General Requirements)	-	500	-
Cl-5(General notes on tests)	-	500	-
Cl-6(Rating)	-	500	-
Cl-7(Classification)	-	500	-
Cl-8(Marking)	-	500	-
Cl-9(Checking of dimensions)	-	500	-
Cl-10.1, 10.2(Prevention of Access to Live Parts)	-	1000	-
Cl-10.3(Requirements for Accessible Metal Parts)	-	1000	-
Cl-10.4(Requirements for Insulation of the Mechanism)	-	1000	-
Cl. 10.5(Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-	1000	-
Cl-10.6(Requirements for Switches Operated Indirectly)	-	1000	-
Cl-10.7(Requirements for Switches with Replaceable Pull Cord)	-	1000	-
Cl-11(Provision for earthing)	-	1000	-
Cl-12(Terminals)	-	1000	-
Cl-13(Constructional requirements)	-	1500	-
Cl-14(Mechanism)	-	1500	-
Cl-15.1(Resistance to Ageing)	-	1000	-
Cl-15.2(Protection Provided by Enclosures of Switches)	-	1000	-
Cl-15.3(Resistance to Humidity)	-	1500	-
Cl-16.1(General)	-	500	-
Cl-16.2(Test for Measuring the Insulation Resistance)	-	1000	-
Cl-16.3(Electric Strength Test)	-	1000	-
Cl-17(Temperature rise)	-	1000	-
Cl-18(Making and breaking capacity)	-	1000	-
Cl-19(Normal operation)	-	1000	-
Cl-20(Mechanical strength)	-	1500	-
Cl-21(Resistance to heat)	-	1000	-
Cl-22(Screws, current carrying parts and connections)	-	1500	-
Cl-23(Creepage distances, clearances and distance through sealing compound)	-	1000	-
Cl-24.1(Resistance to abnormal heat and fire)	-	1000	-
Cl-24.2(Resistance to tracking)	-	1000	-
Cl-25(Resistance to rusting)	-	1000	-
19.1(Test for Switches Intended for Inductive Loads)	-	1000	-
19.2(Test for Switches Intended for Externally Ballasted Lamp Loads)	-	1000	-
19.3(Test for Switches Intended for Self-ballasted Lamp Loads)	-	1000	-
13.5(Attachment of knobs)	-	1000	-
12.3.11(Table 11)(Test Current for the Verification of Electrical and Thermal Stresses in Normal Use of Screwless Terminals)	-	1000	-
12.3.12(Table 13)(Deflection Test Forces)	-	1000	-

26 Sep, 2028

-
Included w.e.f 24.02.2026

IS 12744 : Part 1 (2013)

Ready mixed paint, air drying, red oxide - Zinc phosphate, priming - Specification: Part 1 for domestic and decorative applications (First Revision)

All types and Grades

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5.3, 8.1 - Table 1 -xiii)(Keeping Properties)	-	10000	-
Cl.5.3, 8.1 - Table 1 -xii)(Mass)	-	1000	-
Cl.5.3, 8.1 - Table 1 -ix) b)(Flexibility and adhesion b) Bent Test (with 6.25 mm dia mendrel in type 1 apparatus)	-	1500	-
Cl.5.3, 8.1 - Table 1 -ix) a)(Flexibility and adhesion a) Scratch Hardness (Load 800 g))	-	1500	-
Cl.5.3, 8.1 - Table 1 -v)(Wet Opacity)	-	2000	-
Cl.5.3, 8.1 - Table 1 -iii)(Finish)	-	500	-
Cl.5.3, 8.1 - Table 1 -ii)(Consistency )	-	500	-
Cl.5.3, 8.1 - Table 1 -i)(Drying time hard dry)	-	1000	-
Cl.5.3, 8.1 - Table 1 -xi)(Flash Point)	-	1000	-
Cl.5.3, 8.1 - Table 1 -x) b)(Resistance to humidity under conditions of condensation a) Resistance to Salt Spray (for 96 Hours))	-	5000	-
Cl.5.3, 8.1 - Table 1 -x) a)(Resistance to humidity under conditions of condensation a) Resistance to humidity (for 7 days))	-	4000	-
Cl.5.3, 8.1 - Table 1 -viii)(Red Oxide (as Fe2O3) )	-	1500	-
Cl.5.3, 8.1 - Table 1 -vii)(Zinc Phosphate)	-	1500	-
Cl.5.3, 8.1 - Table 1 -vi)(Pigment Content)	-	2500	-
Cl.5.3, 8.1 - Table 1 -iv)(Colour in Natural Daylight)	-	1500	-
Cl.5.2(Lead Restriction)	-	1500	-

26 Sep, 2028

-
Included w.e.f 06.01.2026

IS 13759 (2017)

Polyurethane primer, zinc phosphate (Two - Pack) for exterior painting of railway coaches - Specification (First Revision)

All types and Grade

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause-4.3 & 7.1 Table-1 S.No-1 (v)(Colour)	-	1500	-
Clause-4.3 & 7.1 Table-1 S.No-1 (vii)(Volume solids percent, Min)	-	1500	-
Clause-4.3 & 7.1 Table-1 S.No-1 (ix)(Flash point, base and hardner each)	-	1000	-
Clause-4.3 & 7.1 Table-1 S.No-1 (x), a)(Resistance to humidity)	-	1000	-
Clause-4.3 & 7.1 Table-1 S.No-1 (x), b)(Resistance to salt spray expose for 500 h)	-	1000	-
Clause-4.2.1(Compounds of lead)	-	1500	-
Clause-4.3 & 7.1 Table-1 S.No-1 (i)(Consistency)	-	500	-
Clause-4.3 & 7.1 Table-1 S.No-1 (ii)(Viscosity by ford cup)	-	1000	-
Clause-4.3 & 7.1 Table-1 S.No-1 (iii)(Drying time, h, Max)	-	1500	-
Clause-4.3 & 7.1 Table-1 S.No-1 (iv)(Finish)	-	500	-
Clause-4.3 & 7.1 Table-1 S.No-1 (vi)(Dry film thickness, Min)	-	1000	-
Clause-4.3 & 7.1 Table-1 S.No-1 (viii), a)(Scratch hardness (Load 1 500 g))	-	1500	-
Clause-4.3 & 7.1 Table-1 S.No-1 (viii), b)(Bend test with 6.25 mm dia mandrel in type 1 apparatus )	-	1500	-
Clause-4.3 & 7.1 Table-2 S.No-1 (i)(Fineness of grind, Max)	-	1000	-
Clause-4.3 & 7.1 Table-2 S.No-1 (ii)(Pot life, h, Min)	-	1000	-
Clause-4.3 & 7.1 Table-2 S.No-1 (iii)(Mass, kg/10 litres, Min)	-	500	-
Clause-4.3 & 7.1 Table-2 S.No-1 (iv)(Keeping properties)	-	1000	-
Clause-5(Packing and Marking )	-	500	-
Clause-4.1 (Composition)	-	1500	-

26 Sep, 2028

-
Included w.e.f 14.10.2025

IS 7098 : Part 1 (2025)

Crosslinked Polyethylene Insulated Thermoplastic Sheathed Cables - Specification Part 1 For Working Voltages up to and Including 1 100 Volts (Second Revision)

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(Conductors -Material)	-	200	Complete testing charges=Rs.40000/- Rs.10000/- for Single core unarmoured cable; Rs.2000/- for each addl. Core; Rs.4000/- addl. For armoured cable; Rs.9000/- for addl. Tests for Cat-C1(FR); Rs.13000/- for addl. Tests for Cat-C2 (FR-LSH); Rs.20000/- for ad
Cl-5, Table-1 (i)(Tensile strength)	-	500	-
Cl-5, Table-1 (ii) (a)(Elongation at break- Ageing in air oven)	-	500	-
Cl-5, Table-1 (ii) (b)(Variation in tensile strength, from that without ageing)	-	300	-
Cl-5, Table-1 (ii) (c)(Variation in elongation at break, from that without ageing)	-	300	-
Cl-5, Table-1 (iii) (a)(Hot set- Treatment;)	-	1000	-
Cl-5, Table-1 (iii) (b)(Hot set- Elongation under load)	-	1000	-
Cl-5, Table-1 (iii) (c)(Hot set- Permanent elongation after cooling)	-	1000	-
Cl-5, Table-1 (iv)(Shrinkage)	-	500	-
Cl-5, Table-1 (v)(Water absorption (gravimetric))	-	3000	-
Cl-5, Table-1 (vi)(Volume resistivity)	-	500	-
Cl-6.1 (a)(Fillers and inner sheath- Vulcanized or unvulcanized rubber)	-	200	-
Cl-6.1 (B)(Fillers and inner sheath- Thermoplastic materials)	-	100	-
Cl-7(Armouring)	-	1000	-
Cl-8(Outer Sheath)	-	200	-
Cl-10.3(Tolerance on Thickness of Insulation)	-	250	-
Cl-11(Core Identification)	-	100	-
Cl-12(Laying up of Cores)	-	100	-
Cl-13(Inner Sheath (Common Covering))	-	100	-
Cl-14.1(Armouring- Application)	-	100	-
Cl-14.1.2(armour round wires/formed wires)	-	100	-
Cl-14.2(Type of Armour)	-	100	-
Cl-14.3(Dimensions)	-	100	-
Cl-14.4(Joints)	-	100	-
Cl-14.5(Resistance)	-	500	-
Cl-15.3(Thickness of Outer Sheath)	-	200	-
Cl-16.1 (i) (a)(Test on conductor: Annealing test (for copper);)	-	300	-
Cl-16.1 (i) (b)(Test on conductor: Tensile test (for aluminium);)	-	250	-
Cl-16.1 (i) (c)(Test on conductor: Wrapping test (for aluminium);)	-	250	-
Cl-16.1 (i) (d)(Test on conductor: Resistance test)	-	500	-
Cl-14.6 (a)(Physical tests on round wires/formed wires- Tensile strength)	-	200	-
Cl-14.6 (b)(Physical tests on round wires/formed wires- Elongation at break)	-	200	-
Cl-14.6 (c)(Physical tests on round wires/formed wires- Torsion test for round wires)	-	500	-
Cl-14.6 (d)(Physical tests on round wires/formed wires- Winding test for formed wires)	-	500	-
Cl-14.6 (e)(Physical tests on round wires/formed wires- Uniformity of zinc coating)	-	500	-
Cl-14.6 (f)(Physical tests on round wires/formed wires- Mass of zinc coating)	-	500	-
Cl-14.6 (g)(Physical tests on round wires/formed wires- Resistivity.)	-	500	-
Cl-10, 13, 15(Test for thickness of insulation and sheath)	-	250	-
Cl-16.1 (v) (1)(PVC Sheath- Tensile strength and elongation at break;)	-	250	-
Cl-16.1 (v) (2)(PVC Sheath- Ageing in air oven)	-	300	-
Cl-16.1 (v) (3)(PVC Sheath- Loss of mass in air oven)	-	300	-
Cl-16.1 (v) (6)(PVC Sheath- Heat shock test)	-	500	-
Cl-16.1 (v) (7)(PVC Sheath- Thermal stability)	-	500	-
Cl-8.3-Table 1A(PE Sheath- Carbon black content)	-	1000	-
Cl-8.3-Table 1A(PE Sheath- Tensile strength and elongation at break before and after ageing)	-	1000	-
Cl-8.3-Table 1A(PE Sheath- Hot deformation)	-	1000	-
Cl-8.3-Table 1A(PE Sheath- Shrinkage test.)	-	1000	-
Cl- Table 1B(LSHF Sheath- Tensile strength and elongation at break before and after ageing)	-	500	-
Cl- Table 1B(LSHF Sheath- Hot deformation)	-	500	-
Cl- Table 1B(LSHF Sheath- Shrinkage test)	-	500	-
Cl-17.2(High voltage test)	-	500	-
Cl-17.3(Flammability test)	-	500	-
Cl-17.4(Oxygen index test (FR, FR-LSH or LSHF Sheath))	-	10000	-
Cl-17.5(Flame retardance test on single cable)	-	5000	-
Cl-17.6(Flame retardance test on bunched cables (FR, FR-LSH or LSHF Sheathed Cables))	-	5000	-
Cl-17.7(Test for halogen acid evolution (FR-LSH or LSHF Outer Sheath))	-	5000	-
Cl-17.8(Smoke density test (FR-LSH or LSHF Sheath))	-	5000	-
Cl-17.9(Temperature index test; (FR, FR-LSH or LSHF Sheath))	-	5000	-
Cl-17.10(Test for pH and conductivity of LSHF Sheath)	-	500	-
Cl-17.11(Test for light transmission for LSHF Sheathed Cables)	-	500	-
Cl-16.4 (i)(Cold bend test for outer sheath)	-	500	-
Cl-16.4 (ii)(Cold impact test for outer sheath)	-	500	-
Cl-16.4 (iii)(Cold elongation test for LSHF sheath)	-	500	-
Cl-16.1 (v) (5)(PVC Sheath- Hot deformation test)	-	500	-
Cl- Table 1B(LSHF Sheath- Water absorption test)	-	2000	-
Cl-4(Conductors -Material)	-	200	-
Cl-5, Table-1 (i)(Tensile strength)	-	500	-
Cl-5, Table-1 (ii) (a)(Elongation at break- Ageing in air oven)	-	500	-
Cl-5, Table-1 (ii) (b)(Variation in tensile strength, from that without ageing)	-	500	-
Cl-5, Table-1 (ii) (c)(Variation in elongation at break, from that without ageing)	-	500	-
Cl-5, Table-1 (iii) (a)(Hot set- Treatment;)	-	500	-
Cl-5, Table-1 (iii) (b)(Hot set- Elongation under load)	-	500	-
Cl-5, Table-1 (iii) (c)(Hot set- Permanent elongation after cooling)	-	500	-
Cl-5, Table-1 (iv)(Shrinkage)	-	300	-
Cl-5, Table-1 (v)(Water absorption (gravimetric))	-	2000	-
Cl-5, Table-1 (vi)(Volume resistivity)	-	500	-
Cl-6.1 (a)(Fillers and inner sheath- Vulcanized or unvulcanized rubber)	-	200	-
Cl-6.1 (B)(Fillers and inner sheath- Thermoplastic materials)	-	200	-
Cl-7(Armouring)	-	500	-
Cl-8(Outer Sheath)	-	500	-
Cl-10.3(Tolerance on Thickness of Insulation)	-	200	-
Cl-11(Core Identification)	-	200	-
Cl-12(Laying up of Cores)	-	200	-
Cl-13(Inner Sheath (Common Covering))	-	200	-
Cl-14.1(Armouring- Application)	-	200	-
Cl-14.1.2(armour round wires/formed wires)	-	200	-
Cl-14.2(Type of Armour)	-	200	-
Cl-14.3(Dimensions)	-	200	-
Cl-14.4(Joints)	-	200	-
Cl-14.5(Resistance)	-	500	-
Cl-15.3(Thickness of Outer Sheath)	-	500	-
Cl-16.1 (i) (a)(Test on conductor: Annealing test (for copper);)	-	500	-
Cl-16.1 (i) (b)(Test on conductor: Tensile test (for aluminium);)	-	500	-
Cl-16.1 (i) (c)(Test on conductor: Wrapping test (for aluminium);)	-	500	-
Cl-16.1 (i) (d)(Test on conductor: Resistance test)	-	500	-
Cl-14.6 (a)(Physical tests on round wires/formed wires- Tensile strength)	-	500	-
Cl-14.6 (b)(Physical tests on round wires/formed wires- Elongation at break)	-	500	-
Cl-14.6 (c)(Physical tests on round wires/formed wires- Torsion test for round wires)	-	500	-
Cl-14.6 (d)(Physical tests on round wires/formed wires- Winding test for formed wires)	-	500	-
Cl-14.6 (e)(Physical tests on round wires/formed wires- Uniformity of zinc coating)	-	500	-
Cl-14.6 (f)(Physical tests on round wires/formed wires- Mass of zinc coating)	-	500	-
Cl-14.6 (g)(Physical tests on round wires/formed wires- Resistivity.)	-	500	-
Cl-10, 13, 15(Test for thickness of insulation and sheath)	-	200	-
Cl-16.1 (v) (1)(PVC Sheath- Tensile strength and elongation at break;)	-	200	-
Cl-16.1 (v) (2)(PVC Sheath- Ageing in air oven)	-	500	-
Cl-16.1 (v) (3)(PVC Sheath- Loss of mass in air oven)	-	500	-
Cl-16.1 (v) (6)(PVC Sheath- Heat shock test)	-	500	-
Cl-16.1 (v) (7)(PVC Sheath- Thermal stability)	-	500	-
Cl-8.3-Table 1A(PE Sheath- Carbon black content)	-	1000	-
Cl-8.3-Table 1A(PE Sheath- Tensile strength and elongation at break before and after ageing)	-	1000	-
Cl-8.3-Table 1A(PE Sheath- Hot deformation)	-	1000	-
Cl-8.3-Table 1A(PE Sheath- Shrinkage test.)	-	1000	-
Cl- Table 1B(LSHF Sheath- Tensile strength and elongation at break before and after ageing)	-	1000	-
Cl- Table 1B(LSHF Sheath- Hot deformation)	-	1000	-
Cl- Table 1B(LSHF Sheath- Shrinkage test)	-	1000	-
Cl-17.2(High voltage test)	-	500	-
Cl-17.3(Flammability test)	-	500	-
Cl-17.4(Oxygen index test (FR, FR-LSH or LSHF Sheath))	-	2500	-
Cl-17.5(Flame retardance test on single cable)	-	5000	-
Cl-17.6(Flame retardance test on bunched cables (FR, FR-LSH or LSHF Sheathed Cables))	-	5000	-
Cl-17.7(Test for halogen acid evolution (FR-LSH or LSHF Outer Sheath))	-	2500	-
Cl-17.8(Smoke density test (FR-LSH or LSHF Sheath))	-	2500	-
Cl-17.9(Temperature index test; (FR, FR-LSH or LSHF Sheath))	-	2500	-
Cl-17.10(Test for pH and conductivity of LSHF Sheath)	-	500	-
Cl-17.11(Test for light transmission for LSHF Sheathed Cables)	-	200	-
Cl-16.4 (i)(Cold bend test for outer sheath)	-	500	-
Cl-16.4 (ii)(Cold impact test for outer sheath)	-	500	-
Cl-16.4 (iii)(Cold elongation test for LSHF sheath)	-	500	-
Cl-16.1 (v) (5)(PVC Sheath- Hot deformation test)	-	500	-
Cl- Table 1B(LSHF Sheath- Water absorption test)	-	2000	-

26 Sep, 2028

-
Included w.e.f 12.09.2025

IS 427 (2013)

Distemper, dry, colour as required - Specification (Third Revision)

All Grade and Types

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3.1(Lead restriction)	-	500	-
4.2.2 & 7, Table-1(iv)(Colour)	-	1000	-
4.2.2 & 7, Table-1(v)(Fastness to light)	-	1500	-
4.2.2 & 7, Table-1(vii)(Recoating properties)	-	500	-
4.2.2 & 7, Table-1(viii)(Resistance to alkali)	-	500	-
4.2.2 & 7, Table-1(ix)(Resistance to dry rubbing)	-	500	-
4.1(Form and Condition)	-	200	-
4.2.1(Composition)	-	300	-
4.2.2 & 7, Table-1(i)(Drying time)	-	500	-
4.2.2 & 7, Table-1(ii)(Consistency)	-	500	-
4.2.2 & 7, Table-1(iii)(Finish)	-	500	-
4.2.2 & 7, Table-1(vi)(Residue on seive)	-	1000	-

26 Sep, 2028

-
Included w.e.f. 14.08.2025

IS 5410 (2013)

Cement paint - Specification (Second Revision)

All Grade and Types

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4.8, 7.1 - Table 1 ix)(Recoating Properties)	-	500	-
Cl.4.8, 7.1 - Table 1 vi)(Resistance to dry rubbing)	-	500	-
Cl.4.8, 7.1 - Table 1 iv)(Fastness to light)	-	1000	-
Cl.4.8, 7.1 - Table 1 iii)(Colour)	-	1000	-
Cl.4.4(Lead Restriction)	-	1000	-
Cl.4.1(Composition - Hydrated Lime)	-	500	-
Cl.4.1(Composition - Portland Cement)	-	500	-
Cl.4.7(Keeping Properties)	-	500	-
Cl.4.8, 7.1 - Table 1 viii)(Pot life of mixed paint)	-	500	-
Cl.4.8, 7.1 - Table 1 vii)(Water Repellency)	-	1000	-
Cl.4.8, 7.1 - Table 1 v)(Residue on sieve (on dry material))	-	500	-
Cl.4.8, 7.1 - Table 1 ii)(Finish)	-	500	-
Cl.4.8, 7.1 - Table 1 i)(Drying Time, Hard Dry)	-	500	-
Cl.4.6(Durability)	-	1000	-
Cl.4.2(Preparation for Use)	-	200	-
Cl.4.1.1(Freedom from Organic Binders)	-	300	-

26 Sep, 2028

-
Included w.e.f. 14.08.2025

IS 3536 (2016)

Ready mixed paint, brushing, wood primer - Specification (Second Revision)

All Types and Grade

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Lead Restriction)	-	1000	-
4.3, Table 1, (v)(Colour)	-	1000	-
4.3, Table 1, (vii)(Flash point)	-	500	-
4.3, Table 1, (viii),(a)(Volume solids, percent, Min)	-	500	-
4.3, Table 1, (ix)(Water content percent by mass, Max (if suspected to be present))	-	1000	-
4.3, Table 1, (x)(Resistance to water)	-	500	-
Clause-4.2(Lead Restriction)	-	1000	-
Clause-4.3 and 1.1 Table-1 S.No. 1 (v)(Colour)	-	1000	-
Clause-4.3 and 1.1 Table-1 S.No. 1 (vii)(Flash point)	-	500	-
Clause-4.3 and 1.1 Table-1 S.No. 1 (x)(Water content1) percent by mass,)	-	1000	-
Clause-4.3 and 1.1 Table-1 S.No. 1 (xi)(Resistance to water)	-	500	-
Clause-4.3 and 1.1 Table-1 S.No. 1 (ix)(Volume solids, percent, Min)	-	500	-
4.3 Table 1(i)(Drying time, h, Max)	-	500	-
4.3, Table 1,(i) (a)(Surface dry)	-	500	-
4.3, Table 1,(i) (b)(Hard dry)	-	500	-
4.3, Table 1, (ii)(Consistency)	-	500	-
4.3, Table 1, (iii)(Mass, in kg/10 litres, Min)	-	500	-
4.3, Table 1, (iv)(Finish)	-	300	-
4.3, Table 1, (vi), (a)(Bend test with Type 1 apparatus and 6.25 dia mandrel)	-	500	-
4.3, Table 1, (vi),(b)(Scratch hardness at a load of (500 g))	-	1000	-
4.3, Table 1, (xi)(Keeping properties)	-	500	-
5.1(Packing)	-	200	-
5.2(Marking)	-	200	-
Clause-4.3 and 1.1 Table-1 S.No. 1 (i)(Drying time,)	-	500	-
Clause-4.3 and 1.1 Table-1 S.No. 1 (ii)(Consistency)	-	500	-
Clause-4.3 and 1.1 Table-1 S.No. 1 (iii)(Mass, in kg/10 litres, Min)	-	500	-
Clause-4.3 and 1.1 Table-1 S.No. 1 (iv)(Finish)	-	300	-
Clause-4.3 and 1.1 Table-1 S.No. 1 (vi), (a)(Bend test with Type 1 apparatus and 6.25 dia mandrel)	-	500	-
Clause-4.3 and 1.1 Table-1 S.No. 1 (vi), (b)(Scratch hardness at a load of (500 g))	-	1000	-
Clause-4.3 and 1.1 Table-1 S.No. 1 (xii)(Keeping properties)	-	500	-
Clause-5(Packing and Marking )	-	200	-

26 Sep, 2028

-
Included w.e.f. 14.08.2025

IS 11883 (2017)

Ready mixed paint, brushing, red oxide, priming for metals specification (First Revision)

All grade and types

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause-4.2.1(Lead Restriction)	-	500	-
Clause-4.3 Table-1 S.No-1 (vi)(Colour)	-	500	-
Clause-4.3 Table-1 S.No-1 (vii)(Water content, percent by mass)	-	1000	-
Clause-4.3 Table-1 S.No-1 (ix), b)(Resistance to salt spray)	-	2000	-
Clause-4.3 Table-1 S.No-1 (x)(Flash point )	-	1000	-
Clause-4.1 (Composition-)	-	500	-
Clause-4.3 Table-1 S.No-1 (i)(Drying Time, h, Max)	-	1000	-
Clause-4.3 Table-1 S.No-1 (ii)(Consistency)	-	500	-
Clause-4.3 Table-1 S.No-1 (iii)(Finish)	-	500	-
Clause-4.3 Table-1 S.No-1 (iv)(Mass, kg/101, Min)	-	500	-
Clause-4.3 Table-1 S.No-1 (v)(Wet opacity )	-	500	-
Clause-4.3 Table-1 S.No-1 (viii), a)(Bend test (with 6.25 mm dia mandrel and type 1 apparatus))	-	500	-
Clause-4.3 Table-1 S.No-1 (viii), b)(Scratch hardness (load 1000 g))	-	1000	-
Clause-4.3 Table-1 S.No-1 (ix), a)(Resistance to humidity (expose for 4 days))	-	1000	-
Clause-4.3 Table-1 S.No-1 (xi)(Keeping properties)	-	500	-
Clause-5(Packing and Marking )	-	200	-
Clause-4.2.1(Lead Restriction)	-	0	-
Clause-4.3 Table-1 S.No-1 (vi)(Colour)	-	0	-
Clause-4.3 Table-1 S.No-1 (vii)(Water content, percent by mass)	-	0	-
Clause-4.3 Table-1 S.No-1 (ix), b)(Resistance to salt spray)	-	0	-
Clause-4.3 Table-1 S.No-1 (x)(Flash point )	-	0	-
Clause-4.1 (Composition-)	-	0	-
Clause-4.3 Table-1 S.No-1 (i)(Drying Time, h, Max)	-	0	-
Clause-4.3 Table-1 S.No-1 (ii)(Consistency)	-	0	-
Clause-4.3 Table-1 S.No-1 (iii)(Finish)	-	0	-
Clause-4.3 Table-1 S.No-1 (iv)(Mass, kg/101, Min)	-	0	-
Clause-4.3 Table-1 S.No-1 (v)(Wet opacity )	-	0	-
Clause-4.3 Table-1 S.No-1 (viii), a)(Bend test (with 6.25 mm dia mandrel and type 1 apparatus))	-	0	-
Clause-4.3 Table-1 S.No-1 (viii), b)(Scratch hardness (load 1000 g))	-	0	-
Clause-4.3 Table-1 S.No-1 (ix), a)(Resistance to humidity (expose for 4 days))	-	0	-
Clause-4.3 Table-1 S.No-1 (xi)(Keeping properties)	-	0	-
Clause-5(Packing and Marking )	-	0	-
Clause-4.2.1(Lead Restriction)	-	0	-
Clause-4.3 Table-1 S.No-1 (vi)(Colour)	-	0	-
Clause-4.3 Table-1 S.No-1 (vii)(Water content, percent by mass)	-	0	-
Clause-4.3 Table-1 S.No-1 (ix), b)(Resistance to salt spray)	-	0	-
Clause-4.3 Table-1 S.No-1 (x)(Flash point )	-	0	-
Clause-4.1 (Composition-)	-	0	-
Clause-4.3 Table-1 S.No-1 (i)(Drying Time, h, Max)	-	0	-
Clause-4.3 Table-1 S.No-1 (ii)(Consistency)	-	0	-
Clause-4.3 Table-1 S.No-1 (iii)(Finish)	-	0	-
Clause-4.3 Table-1 S.No-1 (iv)(Mass, kg/101, Min)	-	0	-
Clause-4.3 Table-1 S.No-1 (v)(Wet opacity )	-	0	-
Clause-4.3 Table-1 S.No-1 (viii), a)(Bend test (with 6.25 mm dia mandrel and type 1 apparatus))	-	0	-
Clause-4.3 Table-1 S.No-1 (viii), b)(Scratch hardness (load 1000 g))	-	0	-
Clause-4.3 Table-1 S.No-1 (ix), a)(Resistance to humidity (expose for 4 days))	-	0	-
Clause-4.3 Table-1 S.No-1 (xi)(Keeping properties)	-	0	-
Clause-5(Packing and Marking )	-	0	-
Clause-4.2.1(Lead Restriction)	-	0	-
Clause-4.3 Table-1 S.No-1 (vi)(Colour)	-	0	-
Clause-4.3 Table-1 S.No-1 (vii)(Water content, percent by mass)	-	0	-
Clause-4.3 Table-1 S.No-1 (ix), b)(Resistance to salt spray)	-	0	-
Clause-4.3 Table-1 S.No-1 (x)(Flash point )	-	0	-
Clause-4.1 (Composition-)	-	0	-
Clause-4.3 Table-1 S.No-1 (i)(Drying Time, h, Max)	-	0	-
Clause-4.3 Table-1 S.No-1 (ii)(Consistency)	-	0	-
Clause-4.3 Table-1 S.No-1 (iii)(Finish)	-	0	-
Clause-4.3 Table-1 S.No-1 (iv)(Mass, kg/101, Min)	-	0	-
Clause-4.3 Table-1 S.No-1 (v)(Wet opacity )	-	0	-
Clause-4.3 Table-1 S.No-1 (viii), a)(Bend test (with 6.25 mm dia mandrel and type 1 apparatus))	-	0	-
Clause-4.3 Table-1 S.No-1 (viii), b)(Scratch hardness (load 1000 g))	-	0	-
Clause-4.3 Table-1 S.No-1 (ix), a)(Resistance to humidity (expose for 4 days))	-	0	-
Clause-4.3 Table-1 S.No-1 (xi)(Keeping properties)	-	0	-
Clause-5(Packing and Marking )	-	0	-

26 Sep, 2028

-
included w.e.f 21.11.2025

IS 3315 (2024)

Direct Evaporative Air Cooler â Specification (Fourth Revision)

75000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Enclosure)	-	2000	-
Cl-5.2(Filter Pads)	-	2000	-
Cl-5.3(Sump Tank Capacities)	-	2000	-
Cl-5.4(Blower/Fan)	-	2000	-
Cl-5.4.3(Fan motor)	-	2000	-
Cl-5.5(Pump Set)	-	2000	-
Cl-5.6.1(Electrical wiring and connection)	-	2000	-
Cl-5.6.2(Suitable power cable)	-	2000	-
Cl-5.7(Switches)	-	4000	-
Cl-6(Rating Requirement)	-	1000	-
Cl-8.1(Performance Requirement)	-	4000	-
Cl-8.2(Sound Test)	-	4000	-
Cl-8.3(Air Delivery (Air Flow) Test)	-	8000	-
Cl-8.4(Cooling Efficiency Test)	-	8000	-
Cl-8.5(Power Consumption)	-	4000	-
Cl-8.6(EER Calculation Method)	-	4000	-
Cl-8.7(Drop Test)	-	2000	-
Cl-8.8(Air Cooler Blower/Fan Reliability Test)	-	5000	-
Cl-12.2.1(General Running Tests)	-	2000	-
Cl-12.2.2(Protection against Electric Shock)	-	2000	-
Cl-12.2.3(High Voltage Tests)	-	3000	-
Cl-12.2.4(Leakage Current)	-	2000	-
Cl-12.2.5(Provision for Earthing)	-	2000	-
Cl-12.2.6(Finish)	-	1000	-
Cl-13(Additional Requirement for ECO-Mark)	-	2000	-
Cl-14(Storage)	-	1000	-
Cl-5.1(Enclosure)	-	0	-
Cl-5.2(Filter Pads)	-	0	-
Cl-5.3(Sump Tank Capacities)	-	0	-
Cl-5.4(Blower/Fan)	-	0	-
Cl-5.4.3(Fan motor)	-	0	-
Cl-5.5(Pump Set)	-	0	-
Cl-5.6.1(Electrical wiring and connection)	-	0	-
Cl-5.6.2(Suitable power cable)	-	0	-
Cl-5.7(Switches)	-	0	-
Cl-6(Rating Requirement)	-	0	-
Cl-8.1(Performance Requirement)	-	0	-
Cl-8.2(Sound Test)	-	0	-
Cl-8.3(Air Delivery (Air Flow) Test)	-	0	-
Cl-8.4(Cooling Efficiency Test)	-	0	-
Cl-8.5(Power Consumption)	-	0	-
Cl-8.6(EER Calculation Method)	-	0	-
Cl-8.7(Drop Test)	-	0	-
Cl-8.8(Air Cooler Blower/Fan Reliability Test)	-	0	-
Cl-12.2.1(General Running Tests)	-	0	-
Cl-12.2.2(Protection against Electric Shock)	-	0	-
Cl-12.2.3(High Voltage Tests)	-	0	-
Cl-12.2.4(Leakage Current)	-	0	-
Cl-12.2.5(Provision for Earthing)	-	0	-
Cl-12.2.6(Finish)	-	0	-
Cl-13(Additional Requirement for ECO-Mark)	-	0	-
Cl-14(Storage)	-	0	-

26 Sep, 2028

-
Included w.e.f 28.07.2025

IS 712 (1984)

Specification for building limes (Third Revision)

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4.1 - Table 1 - i(Calcium and Magnesium Oxides, on ignited basis - IS 6932 (part 1) : 1973)	-	500	-
Cl. 4.1 - Table 1 - ii(Magnesium Oxides, on ignited basis - IS 6932 (part 1) : 1973)	-	500	-
Cl. 4.1 - Table 1 - iii(Silica, Alumina and Ferric oxide, on ignited basis - IS 6932 (part 1) : 1973)	-	500	-
Cl. 4.1 - Table 1 - iv(Unhydrated Magnesium oxide, on ignited basis - IS 6932 (part 5) : 1973)	-	500	-
Cl. 4.1 - Table 1 - v(Insoluble Residue in dilute acid and alkali, on ignited basis - IS 6932 (part 1) : 1973)	-	500	-
Cl. 4.1 - Table 1 - vi(Carbondioxide on oven dried basis - IS 6932 (part 2) : 1973)	-	500	-
Cl. 4.1 - Table 1 - vii(Free moisture content - IS 1514 : 1959)	-	300	-
Cl. 4.1 - Table 1 - viii(Available lime as CaO (dry basis) - IS 1514 : 1959)	-	700	-
Cl 4 ,Table 1(Chem reqd)	-	0	-
cl 4, Table 2(Physical reqd)	-	0	-
Clauses 5.1 Table No. 2, SI No. (ix) (Popping Pitting)	-	1000	-
Clauses 5.1 Table No. 2, SI No. (viii) (Soundness- Le chatelier Expansion)	-	1000	-
Clauses 5.1 Table No. 2, SI No. (vi) (Workability Bumps)	-	1000	-
Clauses 5.1 Table No. 2, SI No. (v) (Transverse strength at 28 days)	-	1500	-
Clauses 5.1 Table No. 2, SI No. (iv) b) (Compressive strength at 28 days)	-	750	-
Clauses 5.1 Table No. 2, SI No. (iv) a) (Compressive strength at 14 days)	-	750	-
Clauses 5.1 Table No. 2, SI No. (iii) b) (Final Setting time)	-	500	-
Clauses 5.1 Table No. 2, SI No. (iii) a) (Initial Setting time)	-	500	-
Clauses 5.1 Table No. 2, SI No. (ii) b) (Residue on slaking (Residue on 300 micron IS sieve))	-	500	-
Clauses 5.1 Table No. 2, SI No. (ii) a) (Residue on slaking (Residue on 850 micron IS sieve))	-	500	-
Clauses 5.1 Table No. 2, SI No. (i) c) (Fineness- (Residue on 212 micron IS Sieve))	-	500	-
Clauses 5.1 Table No. 2, SI No. (i) b) (Fineness- (Residue on 300 micron IS Sieve))	-	500	-
Clauses 5.1 Table No. 2, SI No. (i) a) (Fineness- (Residue on 2.36 mm IS Sieve))	-	500	-
Cl. 4.1 - Table 1 - i(Calcium and Magnesium Oxides, on ignited basis - IS 6932 (part 1) : 1973)	-	0	-
Cl. 4.1 - Table 1 - ii(Magnesium Oxides, on ignited basis - IS 6932 (part 1) : 1973)	-	0	-
Cl. 4.1 - Table 1 - iii(Silica, Alumina and Ferric oxide, on ignited basis - IS 6932 (part 1) : 1973)	-	0	-
Cl. 4.1 - Table 1 - iv(Unhydrated Magnesium oxide, on ignited basis - IS 6932 (part 5) : 1973)	-	0	-
Cl. 4.1 - Table 1 - v(Insoluble Residue in dilute acid and alkali, on ignited basis - IS 6932 (part 1) : 1973)	-	0	-
Cl. 4.1 - Table 1 - vi(Carbondioxide on oven dried basis - IS 6932 (part 2) : 1973)	-	0	-
Cl. 4.1 - Table 1 - vii(Free moisture content - IS 1514 : 1959)	-	0	-
Cl. 4.1 - Table 1 - viii(Available lime as CaO (dry basis) - IS 1514 : 1959)	-	0	-
Cl 4 ,Table 1(Chem reqd)	-	0	-
cl 4, Table 2(Physical reqd)	-	0	-
Clauses 5.1 Table No. 2, SI No. (ix) (Popping Pitting)	-	0	-
Clauses 5.1 Table No. 2, SI No. (viii) (Soundness- Le chatelier Expansion)	-	0	-
Clauses 5.1 Table No. 2, SI No. (vi) (Workability Bumps)	-	0	-
Clauses 5.1 Table No. 2, SI No. (v) (Transverse strength at 28 days)	-	0	-
Clauses 5.1 Table No. 2, SI No. (iv) b) (Compressive strength at 28 days)	-	0	-
Clauses 5.1 Table No. 2, SI No. (iv) a) (Compressive strength at 14 days)	-	0	-
Clauses 5.1 Table No. 2, SI No. (iii) b) (Final Setting time)	-	0	-
Clauses 5.1 Table No. 2, SI No. (iii) a) (Initial Setting time)	-	0	-
Clauses 5.1 Table No. 2, SI No. (ii) b) (Residue on slaking (Residue on 300 micron IS sieve))	-	0	-
Clauses 5.1 Table No. 2, SI No. (ii) a) (Residue on slaking (Residue on 850 micron IS sieve))	-	0	-
Clauses 5.1 Table No. 2, SI No. (i) c) (Fineness- (Residue on 212 micron IS Sieve))	-	0	-
Clauses 5.1 Table No. 2, SI No. (i) b) (Fineness- (Residue on 300 micron IS Sieve))	-	0	-
Clauses 5.1 Table No. 2, SI No. (i) a) (Fineness- (Residue on 2.36 mm IS Sieve))	-	0	-
Cl. 4.1 - Table 1 - i(Calcium and Magnesium Oxides, on ignited basis - IS 6932 (part 1) : 1973)	-	0	-
Cl. 4.1 - Table 1 - ii(Magnesium Oxides, on ignited basis - IS 6932 (part 1) : 1973)	-	0	-
Cl. 4.1 - Table 1 - iii(Silica, Alumina and Ferric oxide, on ignited basis - IS 6932 (part 1) : 1973)	-	0	-
Cl. 4.1 - Table 1 - iv(Unhydrated Magnesium oxide, on ignited basis - IS 6932 (part 5) : 1973)	-	0	-
Cl. 4.1 - Table 1 - v(Insoluble Residue in dilute acid and alkali, on ignited basis - IS 6932 (part 1) : 1973)	-	0	-
Cl. 4.1 - Table 1 - vi(Carbondioxide on oven dried basis - IS 6932 (part 2) : 1973)	-	0	-
Cl. 4.1 - Table 1 - vii(Free moisture content - IS 1514 : 1959)	-	0	-
Cl. 4.1 - Table 1 - viii(Available lime as CaO (dry basis) - IS 1514 : 1959)	-	0	-
Cl 4 ,Table 1(Chem reqd)	-	0	-
cl 4, Table 2(Physical reqd)	-	0	-
Clauses 5.1 Table No. 2, SI No. (ix) (Popping Pitting)	-	0	-
Clauses 5.1 Table No. 2, SI No. (viii) (Soundness- Le chatelier Expansion)	-	0	-
Clauses 5.1 Table No. 2, SI No. (vi) (Workability Bumps)	-	0	-
Clauses 5.1 Table No. 2, SI No. (v) (Transverse strength at 28 days)	-	0	-
Clauses 5.1 Table No. 2, SI No. (iv) b) (Compressive strength at 28 days)	-	0	-
Clauses 5.1 Table No. 2, SI No. (iv) a) (Compressive strength at 14 days)	-	0	-
Clauses 5.1 Table No. 2, SI No. (iii) b) (Final Setting time)	-	0	-
Clauses 5.1 Table No. 2, SI No. (iii) a) (Initial Setting time)	-	0	-
Clauses 5.1 Table No. 2, SI No. (ii) b) (Residue on slaking (Residue on 300 micron IS sieve))	-	0	-
Clauses 5.1 Table No. 2, SI No. (ii) a) (Residue on slaking (Residue on 850 micron IS sieve))	-	0	-
Clauses 5.1 Table No. 2, SI No. (i) c) (Fineness- (Residue on 212 micron IS Sieve))	-	0	-
Clauses 5.1 Table No. 2, SI No. (i) b) (Fineness- (Residue on 300 micron IS Sieve))	-	0	-
Clauses 5.1 Table No. 2, SI No. (i) a) (Fineness- (Residue on 2.36 mm IS Sieve))	-	0	-
Clauses 5.1 Table No. 2, SI No. (vii) (Volume yield)	-	1000	-
Cl. 4.1 - Table 1 - i(Calcium and Magnesium Oxides, on ignited basis - IS 6932 (part 1) : 1973)	-	0	-
Cl. 4.1 - Table 1 - ii(Magnesium Oxides, on ignited basis - IS 6932 (part 1) : 1973)	-	0	-
Cl. 4.1 - Table 1 - iii(Silica, Alumina and Ferric oxide, on ignited basis - IS 6932 (part 1) : 1973)	-	0	-
Cl. 4.1 - Table 1 - iv(Unhydrated Magnesium oxide, on ignited basis - IS 6932 (part 5) : 1973)	-	0	-
Cl. 4.1 - Table 1 - v(Insoluble Residue in dilute acid and alkali, on ignited basis - IS 6932 (part 1) : 1973)	-	0	-
Cl. 4.1 - Table 1 - vi(Carbondioxide on oven dried basis - IS 6932 (part 2) : 1973)	-	0	-
Cl. 4.1 - Table 1 - vii(Free moisture content - IS 1514 : 1959)	-	0	-
Cl. 4.1 - Table 1 - viii(Available lime as CaO (dry basis) - IS 1514 : 1959)	-	0	-
Cl 4 ,Table 1(Chem reqd)	-	0	-
cl 4, Table 2(Physical reqd)	-	0	-
Clauses 5.1 Table No. 2, SI No. (ix) (Popping Pitting)	-	0	-
Clauses 5.1 Table No. 2, SI No. (viii) (Soundness- Le chatelier Expansion)	-	0	-
Clauses 5.1 Table No. 2, SI No. (vi) (Workability Bumps)	-	0	-
Clauses 5.1 Table No. 2, SI No. (v) (Transverse strength at 28 days)	-	0	-
Clauses 5.1 Table No. 2, SI No. (iv) b) (Compressive strength at 28 days)	-	0	-
Clauses 5.1 Table No. 2, SI No. (iv) a) (Compressive strength at 14 days)	-	0	-
Clauses 5.1 Table No. 2, SI No. (iii) b) (Final Setting time)	-	0	-
Clauses 5.1 Table No. 2, SI No. (iii) a) (Initial Setting time)	-	0	-
Clauses 5.1 Table No. 2, SI No. (ii) b) (Residue on slaking (Residue on 300 micron IS sieve))	-	0	-
Clauses 5.1 Table No. 2, SI No. (ii) a) (Residue on slaking (Residue on 850 micron IS sieve))	-	0	-
Clauses 5.1 Table No. 2, SI No. (i) c) (Fineness- (Residue on 212 micron IS Sieve))	-	0	-
Clauses 5.1 Table No. 2, SI No. (i) b) (Fineness- (Residue on 300 micron IS Sieve))	-	0	-
Clauses 5.1 Table No. 2, SI No. (i) a) (Fineness- (Residue on 2.36 mm IS Sieve))	-	0	-
Clauses 5.1 Table No. 2, SI No. (vii) (Volume yield)	-	0	-

26 Sep, 2028

-
Included w.e.f 12.09.2025

IS 10322 : Part 5 : Sec 9 (2017)

Luminaires: Part 5 particular requirements: Sec 9 rope lights

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
21.4(General Test Requireements)	-	500	-
21.5(Classification of Luminaires')	-	500	-
21.6(Marking)	-	500	-
21.7(Construction)	-	2500	-
21.8(Creepage Distance and Clearances)	-	2500	-
21.9(Provision for earthing)	-	2500	-
21.10(Terminals)	-	3000	-
21.11(External & Internal Wiring)	-	2500	-
21.12(Protection against electric shock)	-	3000	-
21.13(Endurance Tests and Thermal Tests)	-	7000	-
21.14(Resistance to Dust & Moisture)	-	7000	-
21.15(Insulation Resistance and Electric Strength)	-	5000	-
21.16(Resistance to Heat , fire and tracking)	-	7000	-
21.7.1(General)	-	5000	-
21.7.3(Terminals and supply connections)	-	2500	-
21.7.4(Control units)	-	3000	-
21.7.5(Mechanical strength)	-	8000	-
21.4(General Test Requireements)	-	0	-
21.5(Classification of Luminaires')	-	0	-
21.6(Marking)	-	0	-
21.7(Construction)	-	0	-
21.8(Creepage Distance and Clearances)	-	0	-
21.9(Provision for earthing)	-	0	-
21.10(Terminals)	-	0	-
21.11(External & Internal Wiring)	-	0	-
21.12(Protection against electric shock)	-	0	-
21.13(Endurance Tests and Thermal Tests)	-	0	-
21.14(Resistance to Dust & Moisture)	-	0	-
21.15(Insulation Resistance and Electric Strength)	-	0	-
21.16(Resistance to Heat , fire and tracking)	-	0	-
21.7.1(General)	-	0	-
21.7.3(Terminals and supply connections)	-	0	-
21.7.4(Control units)	-	0	-
21.7.5(Mechanical strength)	-	0	-

26 Sep, 2028

-
Included w.e.f.28.07.2025 exclusion Cl.4.24 (UV Radiation) Cl. 4.20 Vibration

IS 10322 : Part 5 : Sec 7 (2017)

Luminaires: Part 5 particular requirements: Sec 7 lighting chains (First Revision)

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
20.4(General Test Requireements)	-	500	5% discount to BIS
20.5(Classification of Luminaires')	-	500	5% discount to BIS
20.6(Marking)	-	2000	5% discount to BIS
20.7(Construction)	-	2500	5% discount to BIS
20.8(Creepage Distance and Clearances)	-	2000	5% discount to BIS
20.9(Provision for earthing)	-	2000	5% discount to BIS
20.10(Terminals)	-	2500	5% discount to BIS
20.11(External & Internal Wiring)	-	2500	5% discount to BIS
20.12(Protection against electric shock)	-	2500	5% discount to BIS
20.13(Endurance Tests and Thermal Tests)	-	5000	5% discount to BIS
20.14(Resistance to Dust & Moisture)	-	3000	5% discount to BIS
20.15(Insulation Resistance and Electric Strength)	-	3000	5% discount to BIS
20.16(Resistance to Heat , fire and tracking)	-	3000	5% discount to BIS
20.4(General Test Requireements)	-	0	-
20.5(Classification of Luminaires')	-	0	-
20.6(Marking)	-	0	-
20.7(Construction)	-	0	-
20.8(Creepage Distance and Clearances)	-	0	-
20.9(Provision for earthing)	-	0	-
20.10(Terminals)	-	0	-
20.11(External & Internal Wiring)	-	0	-
20.12(Protection against electric shock)	-	0	-
20.13(Endurance Tests and Thermal Tests)	-	0	-
20.14(Resistance to Dust & Moisture)	-	0	-
20.15(Insulation Resistance and Electric Strength)	-	0	-
20.16(Resistance to Heat , fire and tracking)	-	0	-
20.4(General Test Requireements)	-	0	-
20.5(Classification of Luminaires')	-	0	-
20.6(Marking)	-	0	-
20.7(Construction)	-	0	-
20.8(Creepage Distance and Clearances)	-	0	-
20.9(Provision for earthing)	-	0	-
20.10(Terminals)	-	0	-
20.11(External & Internal Wiring)	-	0	-
20.12(Protection against electric shock)	-	0	-
20.13(Endurance Tests and Thermal Tests)	-	0	-
20.14(Resistance to Dust & Moisture)	-	0	-
20.15(Insulation Resistance and Electric Strength)	-	0	-
20.16(Resistance to Heat , fire and tracking)	-	0	-

26 Sep, 2028

-
Included w.e.f.28.07.2025 Exclusion Cl.4.24 (UV Radiation) Cl. 4.20 Vibration

IS 4250 (2025)

Electric Food-Mixers (Liquidizers and Grinders) and Centrifugal Juicers ï¿½ Specification ( Second Revision )

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	100	-
Cl-5(General Conditions for the tests)	-	100	-
Cl-6(Classification)	-	100	-
Cl-7(Marking)	-	100	-
Cl-8(Safety Requirements)	-	100	-
Cl-9(Endurance fpr motor and base assembly)	-	2000	-
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	2000	-
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	2000	-
Cl-10.4(Idli Batter)	-	2000	-
Cl-10.5(Operational Tests for Juicers)	-	2000	-
Cl-11(Temperature Withstand Test for Bowl)	-	2000	-
Cl-12.1(Test for Switches)	-	2000	-
Cl-13(Strength of Assembly)	-	2000	-
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	500	-
Cl-14.2, Table-2 (ii)(Power input and current)	-	2000	-
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	2000	-
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	2000	-
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	1000	-
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	1000	-

26 Sep, 2028

-
Included w.e.f 03.07.2025 Exclusion : Cl 19.11.4.1-19.11.4.7(EMI/EMC)

IS 302 : Part 2 : Sec 9 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 9 toasters, grills, roasters and similar appliances (First Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.32(Verification)	-	50	5% discount to BIS on testing charges
Cl.31(Verification)	-	50	-
Cl.30(Verification)	-	50	-
CL.29(Verification)	-	50	-
Cl.28(Verification)	-	50	-
Cl.27(Verification)	-	50	-
Cl.26(Verification)	-	50	-
Cl.25(Verification)	-	50	-
Cl.24(Verification)	-	50	-
Cl.23(Verification)	-	50	-
Cl.22(Verification)	-	50	-
Cl.21(Verification)	-	50	-
Cl.20(Verification)	-	50	-
Cl.19(Verification)	-	50	-
Cl. 16(Verification)	-	50	-
Cl.15.1(Moisture Resistance)	-	50	-
Cl.14(Verification)	-	50	-
Cl.13(Verification)	-	50	-
Cl.11(Verification)	-	50	-
Cl.10(Verification)	-	50	-
Cl.8(Verification)	-	50	-
Cl. 7(Verification)	-	50	-
Cl. 6(Classification- IS 302-1)	-	50	-
Cl. 32 IS 302-2-9(Radiation, Toxicity and similar hazards)	-	500	-
Cl. 31 IS 302-2-9(Resistance To Rusting )	-	500	-
Cl. 30 IS 302-2-9(Resistance To Heat, Fire And Tracking)	-	500	-
Cl. 29 IS 302-2-9(Creepage Distances, Clearances And Distances Through Insulation)	-	250	-
Cl. 28 IS 302-2-9(Screws and Connections)	-	500	-
Cl. 27 IS 302-2-9(Provision For Earthing )	-	250	-
Cl. 26 IS 302-2-9(Terminal For External Conductors )	-	500	-
Cl. 25 IS 302-2-9(Supply Connections and External Flexible Cables and Cords )	-	500	-
Cl. 24 IS 302-2-9(Components)	-	1000	-
Cl. 23 IS 302-2-9(Internal Wiring)	-	250	-
Cl. 22 IS 302-2-9(Construction )	-	500	-
Cl. 21 IS 302-2-9(Mechanical Strength)	-	100	-
Cl. 20 IS 302-2-9(Stability and mechanical Hazards)	-	200	-
Cl. 19 IS 302-2-9(Abnormal Operation )	-	500	-
Cl. 18 IS 302-2-9(Endurance)	-	500	-
Cl. 16 IS 302-2-9(Leakage Current and Electric strength )	-	500	-
Cl. 15 IS 302-2-9(Moisture Resistance)	-	2000	-
Cl. 14 IS 302-2-9(Transient overvoltage)	-	500	-
Cl. 13.3 IS 302-2-9(Leakage Current & Electric Strength at Operating Temperature)	-	1000	-
Cl. 11 IS 302-2-9(Heating)	-	1000	-
Cl. 10 IS 302-2-9(Power Input and Current )	-	1000	-
Cl. 9 IS 302-2-9(Starting of motor operated appliances)	-	250	-
Cl. 8 IS 302-2-9(Protection against access to live parts)	-	200	-
Cl. 7 IS 302-2-9(Marking and Instruction)	-	200	-
Cl. 6 IS 302-2-9(Classification- IS 302-1)	-	100	-
32(Radiation, toxicity and similar hazards)	-	500	-
31(Resistance to rusting)	-	500	-
31(Resistance to rusting)	-	500	-
30.2.4(Resistance to heat and fire)	-	500	-
30.2(Resistance to heat and fire)	-	500	-
30.1(Resistance to heat and fire)	-	500	-
29.3(Clearances, creepage distances and solid insulation)	-	250	-
29.2(Clearances, creepage distances and solid insulation)	-	250	-
29.2(Clearances, creepage distances and solid insulation)	-	250	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	-
28.2 to 28.4(Screws and connections)	-	0	-
28.1, Table No.-14(Screws and connections)	-	0	-
27.6(Provision for earthing)	-	0	-
27.5(Provision for earthing)	-	0	-
27.1 to 27.4(Provision for earthing)	-	0	-
26.10 & 26.11(Terminals for external conductors)	-	0	-
26.9(Terminals for external conductors)	-	0	-
26.1 to 26.8(Terminals for external conductors)	-	0	-
25.16 to 25.25(Supply connection and external flexible cords)	-	0	-
25.15(Supply connection and external flexible cords)	-	0	-
25.14(Supply connection and external flexible cords)	-	0	-
25.14(Supply connection and external flexible cords)	-	0	-
25.9 to 25.13(Supply connection and external flexible cords)	-	0	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	0	-
25.5 to 25.7(Supply connection and external flexible cords)	-	0	-
25.4(Supply connection and external flexible cords)	-	0	-
25.3(Supply connection and external flexible cords)	-	0	-
25.2(Supply connection and external flexible cords)	-	0	-
25.1(Supply connection and external flexible cords)	-	0	-
24.101(Components)	-	0	-
24.101(Components)	-	0	-
24.2 to 24.6(Components)	-	0	-
24.1(Components)	-	0	-
23.6 to 23.10(Internal wiring)	-	0	-
23.5(Internal wiring)	-	0	-
23.4(Internal wiring)	-	0	-
23.3(Internal wiring)	-	0	-
23.1 & 23.2(Internal wiring)	-	0	-
22.111(Constructions)	-	0	-
22.111(Constructions)	-	0	-
22.11o(Constructions)	-	0	-
22.109(Constructions)	-	0	-
22.108(Constructions)	-	0	-
22.101 to 22.107(Constructions)	-	0	-
22.13 to 22.48(Constructions)	-	0	-
22.12(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.7 to 22.10(Constructions)	-	0	-
22.6(Constructions)	-	0	-
22.5(Constructions)	-	0	-
22.4(Constructions)	-	0	-
22.3(Constructions)	-	0	-
22.2(Constructions)	-	0	-
22.1(Constructions)	-	0	-
21.101(MECHANICAL STRENGTH)	-	0	-
21.101(MECHANICAL STRENGTH)	-	0	-
21.2(MECHANICAL STRENGTH)	-	0	-
21.1(MECHANICAL STRENGTH)	-	0	-
20.2(Stability and mechanical hazards)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
19.104(ABNORMAL OPERATION)	-	0	-
19.103(ABNORMAL OPERATION)	-	0	-
19.102(ABNORMAL OPERATION)	-	0	-
19.101(ABNORMAL OPERATION)	-	0	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
16.3(Insulation resistance test)	-	0	-
16.3(Electric strength test)	-	0	-
16.1 & 16.2(Leakage current test)	-	0	-
15.3(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.1(Moisture resistance)	-	0	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	0	-
13.3 and Table No.- 4(Electric strength test)	-	0	-
13.1, 13.2(Leakage current test)	-	0	-
13.1, 13.2(Leakage current test)	-	0	-
11.101(Heating)	-	0	-
11.1 to 11.8, Table No.-3(Heating)	-	0	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	0	-
8.1.5(Protection against access to live parts)	-	0	-
8.1.4(Protection against access to live parts)	-	0	-
8.1.3(Protection against access to live parts)	-	0	-
8.1.2(Protection against access to live parts)	-	0	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	0	-
7.14(Legibility & Durability of Markings test)	-	0	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	0	-
32(Radiation, toxicity and similar hazards)	-	0	-
31(Resistance to rusting)	-	0	-
31(Resistance to rusting)	-	0	-
30.2.4(Resistance to heat and fire)	-	0	-
30.2(Resistance to heat and fire)	-	0	-
30.1(Resistance to heat and fire)	-	0	-
29.3(Clearances, creepage distances and solid insulation)	-	0	-
29.2(Clearances, creepage distances and solid insulation)	-	0	-
29.2(Clearances, creepage distances and solid insulation)	-	0	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	-
28.2 to 28.4(Screws and connections)	-	0	-
28.1, Table No.-14(Screws and connections)	-	0	-
27.6(Provision for earthing)	-	0	-
27.5(Provision for earthing)	-	0	-
27.1 to 27.4(Provision for earthing)	-	0	-
26.10 & 26.11(Terminals for external conductors)	-	0	-
26.9(Terminals for external conductors)	-	0	-
26.1 to 26.8(Terminals for external conductors)	-	0	-
25.16 to 25.25(Supply connection and external flexible cords)	-	0	-
25.15(Supply connection and external flexible cords)	-	0	-
25.14(Supply connection and external flexible cords)	-	0	-
25.14(Supply connection and external flexible cords)	-	0	-
25.9 to 25.13(Supply connection and external flexible cords)	-	0	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	0	-
25.5 to 25.7(Supply connection and external flexible cords)	-	0	-
25.4(Supply connection and external flexible cords)	-	0	-
25.3(Supply connection and external flexible cords)	-	0	-
25.2(Supply connection and external flexible cords)	-	0	-
25.1(Supply connection and external flexible cords)	-	0	-
24.101(Components)	-	0	-
24.101(Components)	-	0	-
24.2 to 24.6(Components)	-	0	-
24.1(Components)	-	0	-
23.6 to 23.10(Internal wiring)	-	0	-
23.5(Internal wiring)	-	0	-
23.4(Internal wiring)	-	0	-
23.3(Internal wiring)	-	0	-
23.1 & 23.2(Internal wiring)	-	0	-
22.111(Constructions)	-	0	-
22.111(Constructions)	-	0	-
22.11o(Constructions)	-	0	-
22.109(Constructions)	-	0	-
22.108(Constructions)	-	0	-
22.101 to 22.107(Constructions)	-	0	-
22.13 to 22.48(Constructions)	-	0	-
22.12(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.7 to 22.10(Constructions)	-	0	-
22.6(Constructions)	-	0	-
22.5(Constructions)	-	0	-
22.4(Constructions)	-	0	-
22.3(Constructions)	-	0	-
22.2(Constructions)	-	0	-
22.1(Constructions)	-	0	-
21.101(MECHANICAL STRENGTH)	-	0	-
21.101(MECHANICAL STRENGTH)	-	0	-
21.2(MECHANICAL STRENGTH)	-	0	-
21.1(MECHANICAL STRENGTH)	-	0	-
20.2(Stability and mechanical hazards)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
19.104(ABNORMAL OPERATION)	-	0	-
19.103(ABNORMAL OPERATION)	-	0	-
19.102(ABNORMAL OPERATION)	-	0	-
19.101(ABNORMAL OPERATION)	-	0	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
16.3(Insulation resistance test)	-	0	-
16.3(Electric strength test)	-	0	-
16.1 & 16.2(Leakage current test)	-	0	-
15.3(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.1(Moisture resistance)	-	0	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	0	-
13.3 and Table No.- 4(Electric strength test)	-	0	-
13.1, 13.2(Leakage current test)	-	0	-
13.1, 13.2(Leakage current test)	-	0	-
11.101(Heating)	-	0	-
11.1 to 11.8, Table No.-3(Heating)	-	0	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	0	-
8.1.5(Protection against access to live parts)	-	0	-
8.1.4(Protection against access to live parts)	-	0	-
8.1.3(Protection against access to live parts)	-	0	-
8.1.2(Protection against access to live parts)	-	0	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	0	-
7.14(Legibility & Durability of Markings test)	-	0	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	0	-
32(Radiation ,Toxicity and similar hazards)	-	0	-
31(Resistance to Rusting)	-	0	-
30(Resistance to Heat & Fire)	-	0	-
29(Clearances, Creepage Distances & Solid Insulation)	-	0	-
28(Screws & Connections)	-	0	-
27(Provision For Earthing)	-	0	-
26(Terminals For External Conductors)	-	0	-
25(Supply Connection & External Flexible Cords)	-	0	-
24(Components)	-	0	-
23(Internal wiring)	-	0	-
22(Construction)	-	0	-
21(Mechanical strength)	-	0	-
20(Stability & Mechanical Hazards)	-	0	-
19(Abnormal Operation)	-	0	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	0	-
16(Leakage Current and Electric Strength)	-	0	-
15(Moisture Resistance)	-	0	-
14(Transient Over Voltage)	-	0	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	0	-
11(Temperature Rise/ Heating)	-	0	-
10(Power Input & Current)	-	0	-
9(Starting Of Motor Operated Appliances)	-	0	-
8(Protection against access to live parts)	-	0	-
32(Radiation ,Toxicity and similar hazards)	-	0	-
31(Resistance to Rusting)	-	0	-
30(Resistance to Heat & Fire)	-	0	-
29(Clearances, Creepage Distances & Solid Insulation)	-	0	-
28(Screws & Connections)	-	0	-
27(Provision For Earthing)	-	0	-
26(Terminals For External Conductors)	-	0	-
25(Supply Connection & External Flexible Cords)	-	0	-
24(Components)	-	0	-
23(Internal wiring)	-	0	-
22(Construction)	-	0	-
21(Mechanical strength)	-	0	-
20(Stability & Mechanical Hazards)	-	0	-
19(Abnormal Operation)	-	0	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	0	-
16(Leakage Current and Electric Strength)	-	0	-
15(Moisture Resistance)	-	0	-
14(Transient Over Voltage)	-	0	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	0	-
11(Temperature Rise/ Heating)	-	0	-
10(Power Input & Current)	-	0	-
9(Starting Of Motor Operated Appliances)	-	0	-
8(Protection against access to live parts)	-	0	-
Cl. 17 IS 302-2-9(Overload protection of transformers and associated circuits.)	-	0	-

26 Sep, 2028

-
Included w.e.f 03.07.2025 Exclusion : Cl 19.11.4.1-19.11.4.7(EMI/EMC)

IS 9968 : Part 1 (1988)

Specification for elastomer insulatedcables: Part 1 for working voltages up to and including 1100 volts (First Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1( Copper Cooduetor)	-	250	Single core Rs.12,000/- additional each extra core Rs.1,500/
3.2(Aluminium conductor)	-	250	-
4.1(INSULATION : lnsulation for General Service)	-	250	-
4.2(INSULATION : Heat Resisting insulation)	-	250	-
4.3(INSULATION : Silicone Rubber Insulation)	-	250	-
5.1(TAPE : Proofed Tape)	-	250	-
5.2(TAPE : 2 Polyethyl_ Terephthalate ( PETP ) Tape or Plastic: Tape or Any Other SlIIitable Tape )	-	250	-
5.3(TAPE : Giass Tape)	-	250	-
6.1(FILLERS : )	-	250	-
7.1(BRAID : Textile Braid)	-	250	-
7.2(BRAID : Glass Braid )	-	250	-
8.1(SHEATH : General Service Insulated Cables and Flexible Cords)	-	250	-
8.2(SHEATH :Heat Resisting Insulated Cables)	-	250	-
9.1(PresenRtive Compound)	-	250	-
9.2(Varnish)	-	100	-
10( Conductor )	-	250	-
11(Separator tape)	-	100	-
12.2(Insulation : Thickness of Insufatien)	-	100	-
12.4(Insulation : Allplication of Insulation)	-	100	-
13(CORE IDENTiFICATlON)	-	100	-
14(Tape)	-	100	-
15(BRAIDING)	-	250	-
16(COMPOUNDING AND VARNISHING)	-	250	-
17(LAYING UP OF CORES)	-	250	-
18( Binder tape)	-	250	-
19.2(Sheath : Thickness of Sheath)	-	250	-
19.4( Sheath :Colour)	-	250	-
20( Overall diameter)	-	250	-
21. (a)(Persulphate tests (for copper))	-	250	-
21. (b)(Annealing Test (for coper))	-	250	-
21. (c)( Tensile Test (for aluminium))	-	250	-
21. (d)( Wrapping Test (for aluminium))	-	250	-
21. (e)(Conductor Resistance )	-	250	-
21.1( Tensile strength )	-	500	-
22.1( Elongation)	-	500	-
21.1(type test : Ageing In air oven)	-	500	-
21.1(type test : Ageing in air bomb)	-	500	-
21.1(type test : Ageing In oxygen bomb)	-	500	-
21.1(type test : Hot set elongation)	-	500	-
21.1(type test : Tear resistance )	-	500	-
22.2(type test :Insulauon resistance High voltage (water immersron ) test)	-	500	-
22.2(type test : Flammability test ( applicable to cables finished With SE 3 and SE 4 sheaths only) )	-	500	-
21(Water absorption test)	-	500	-
23(identification)	-	500	-
Cl No. 4.1(Ageing in oxygen bomb - Elongation)	-	500	-
Cl No. 4.1(Ageing in oxygen bomb - Tensile strength )	-	500	-
Cl No. 4.1(Ageing in air bomb - Elongation)	-	500	-
Cl No. 4.1(Ageing in air bomb - Tensile strength )	-	500	-
Cl No. 4.1(Ageing in air oven - Elongation)	-	500	-
Cl No. 4.1(Ageing in air oven - Tensile strength )	-	500	-
Cl No. 22.2(High Voltage Test (Water Immersion))	-	500	-
Cl No. 4.1(Insulation resistance)	-	500	-
Cl No. 22.4, Appendix B (Flexing test for cords for use with electric iron )	-	500	-
Cl No. 22.2.2/22.2.3(High Voltage Test / Spark test)	-	500	-
Cl No. 23.1, 23.2(Identification)	-	500	-
21.1((f) Oil resistance)	-	500	-
Cl.9.1(Compound and Varnish)	-	500	-
Cl.9.2(Compound and Varnish)	-	500	-
Cl.21.1 & Table 2 of IS: 6380-1984(Water Absorption Test)	-	500	-
Cl.19.1(Application of Sheath)	-	500	-
Cl.21.1 & Table 3 of IS: 6380-1984(Physical Test on outer sheath (Without Ageing))	-	500	-
Cl.21.1 & Table 3 of IS: 6380-1984(Physical Test on outer sheath (Without Ageing))	-	500	-
Cl.21.1 & Table 3 of IS: 6380-1984(Physical Test on outer sheath (Without Ageing))	-	500	-
Cl.21.1 & Table 3 of IS: 6380-1984(Physical Test on outer sheath (After ageing in air oven))	-	500	-
Cl.21.1 & Table 3 of IS: 6380-1984(Physical Test on outer sheath (After ageing in air oven))	-	500	-
Cl.21.1 & Table 3 of IS: 6380-1984(Physical Test on outer sheath (After ageing in air Bomb ))	-	500	-
Cl.21.1 & Table 3 of IS: 6380-1984(Physical Test on outer sheath (After ageing in air Bomb ))	-	500	-
Cl.21.1 & Table 3 of IS: 6380-1984(Physical Test on outer sheath (Oil Resistance Test ))	-	500	-
Cl.21.1 & Table 3 of IS: 6380-1984(Physical Test on outer sheath (Oil Resistance Test ) Variation on Elongation (Percentage))	-	500	-
Cl.21.1 & Table 3 of IS: 6380-1984(Physical Test on outer sheath (Hot Set Test))	-	500	-
Cl.21.1 & Table 3 of IS: 6380-1984(Physical Test on outer sheath (Hot Set Test))	-	500	-
Cl.21.1 & Table 2 of IS: 6380-1984(Insulation Resistance Test)	-	500	-
Cl.21.1 & Table 2 of IS: 6380-1984(Insulation Resistance Test)	-	500	-

26 Sep, 2028

-
Included w.e.f 16.07.2025

IS 15909 (2020)

PVC Geomembranes for Lining - Specification ( Second Revision )

160000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0(Types)	-	200	-
5,Table 1(Requirements)	-	0	-
5,Table 1(Length )	-	500	-
5,Table 1(Width )	-	500	-
5,Table 1(Thickness)	-	500	-
5,Table 1(Specific Gravity)	-	1500	-
5,Table 1( Tensile strength (Longitudinal) ,kg/m2)	-	1500	-
5,Table 1(Elongation at break (Longitudinal),250 % ,Min)	-	1000	-
5,Table 1( Tensile strength (Transverse) ,kg/m2)	-	1500	-
5,Table 1(Elongation at break (Transverse),250 % ,Min)	-	1000	-
5,Table 1(Tear resistance (machine direction))	-	2500	-
5,Table 1(Tear resistance (Cross direction))	-	2500	-
5,Table 1(Low temperature crack resistance)	-	5000	-
5,Table 1(Hydrostatic resistance,kg/cm2,Min)	-	8000	-
5,Table 1(Seam strength,kg,Min)	-	3500	-
5,Table 1(Volatile Loss ,% ,Max)	-	2500	-
5,Table 1(Peel strength,kN/m,Min)	-	5000	-
5,Table 1(Resistance to soil burial)	-	7000	-
5,Table 1(Tensile strength (Longitudinal),% change)	-	1500	-
5,Table 1(Elongation at break (Longitudinal),% change)	-	1000	-
5,Table 1(Tensile strength (Transverse),% change)	-	1500	-
5,Table 1(Elongation at break (Transverse),% change)	-	1000	-
5,Table 1(Water extraction,% loss in weight)	-	4500	-
5,Table 1(Stability to ultraviolet radiations,% retension in Tensile strength)	-	15000	-
5,Table 1(Stability to ultraviolet radiations,% retension in Elongation at break)	-	15000	-
6.0(Dimensions and tolerances)	-	1000	-
5, Table-2(Length)	-	500	-
5, Table-2(Width)	-	500	-
5, Table-2(Thickness at 20kPa pressure)	-	500	-
5, Table-2(Tensile Strength (Longitudinal))	-	1500	-
5, Table-2(Tensile Strength (Transverse))	-	1500	-
5, Table-2(Elongation at break (Longitudinal))	-	1000	-
5, Table-2(Elongation at break (Transverse))	-	1000	-
5, Table-2(Tear Strength (Machine direction))	-	2500	-
5, Table-2(Tear Strength (Cross direction))	-	2500	-
5, Table-2(Behaviour during perforation)	-	4000	-
5, Table-2(Height of fall without perforation)	-	2000	-
5, Table-2(Cold crack resistance at low temperature)	-	5000	-
5, Table-2(Hydrostatic Pressure Resistance)	-	7000	-
5, Table-2(Dimensional Stability at 80 degree C)	-	15000	-
5, Table-2(Change in length after heating)	-	4000	-
5, Table-2(Change in width after heating)	-	4000	-
5, Table-2(Resistance to acid and alkali)	-	6000	-
5, Table-2(Strength of welded seam shear resistance)	-	3500	-
5, Table-2(Resistance to static puncturing)	-	2500	-
5, Table-2(Horizontal rate of burning)	-	40000	-
5, Table-2(Vertical rate of burning)	-	40000	-
7.0(Colour ,Surface characteristics and fredom from defects)	-	500	-
7.1(Colour ,Surface characteristics and fredom from defects)	-	500	-
7.2(Colour ,Surface characteristics and fredom from defects)	-	500	-
5,Table 2(Specific Gravity)	-	0	-
5,Table 1(Index puncture resistance,N)	-	3500	-

26 Sep, 2028

-
Included w.e.f 19.05.2025

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification by appearance)	-	200	-
Cl-5.2, Table- 1 (i)(Blister)	-	200	-
Cl-5.2, Table- 1 (ii)(Checks)	-	200	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	200	-
Cl-5.2, Table- 1 (iv)(Dote)	-	200	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	200	-
Cl-5.2, Table- 1 (vi)(Joints)	-	200	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	200	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	200	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	200	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	200	-
Cl-5.2, Table- 1 (xi)(Patches)	-	200	-
Cl-5.2, Table- 1 (xii)(Splits)	-	200	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	200	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	200	-
Cl-6.1(Timber)	-	0	-
Cl-6.2(Adhesive)	-	0	-
Cl-7.2.1(Thickness of veneers)	-	500	-
Cl-7.2.3(Grain Direction)	-	500	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	200	-
Cl-7.2.5.2(Splits)	-	200	-
Cl-7.2.5.3(Overlap)	-	100	-
Cl-8.1(Dimensions -length)	-	1000	-
Cl-8.2(Thickness of the plywood boards)	-	500	-
Cl-8.3(Squareness)	-	1000	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	1000	-
Cl-11.3.2(Mycological Test)	-	1000	-
Cl-11.4(Moisture Content)	-	500	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1500	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	0	-
Cl-9(WORKMANSHIP AND FINISH)	-	0	-
Cl-7.2.4(Scarf Joints)	-	0	-

26 Sep, 2028

-
Included w.e.f 08.05.2025 Exclusion: Cl-11.6 (Formaldehyde Content Test), Cl-11.7 (Steady-State Formaldehyde Emission Test)

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

24000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12(Charging of metal-ion batteries)	-	1500	-
6(Classification- IS 302-1)	-	100	-
5(General conditions for the tests)	-	100	-
11.8(Temperature rise)	-	1000	-
11.7(Duration corresponding)	-	100	-
11.6(Combined appliances)	-	100	-
11.5(Motor-operated appliances)	-	100	-
11.4(Heating appliances)	-	100	-
8.1.5(Live parts of built-in appliances)	-	200	-
18(Endurance)	-	100	-
17(Overload protection of transformers and associated circuits)	-	600	-
16(Leakage current and electric strength)	-	500	-
4(General requirement)	-	100	-
32.1(Radiation Toxicity and Similar Hazards)	-	400	-
31(Resistance to Rusting)	-	500	-
30.2(Needle Flame Test)	-	500	-
30.2(Glow Wire Test)	-	500	-
30.1(Ball pressure test)	-	500	-
29(clearance, creepage distances and solid insulation)	-	500	-
28(Screw test and connections)	-	500	-
27.1(Provision for Earthing, IS 302-1)	-	1000	-
26(Terminals for external conductors)	-	500	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
24(Components)	-	100	-
23.1(Internal Wiring, IS 302-1)	-	400	-
22.1(Construction, IS 302-1)	-	500	-
21.1(Mechanical Strength, IS 302-1)	-	100	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
19(Abnormal Operation)	-	1000	-
18(Endurance)	-	100	-
17(Over Load Protection of Transformers and associated circuits)	-	600	-
16.3(Electric Strength (after clause 15 and 16.2))	-	500	-
16.2(Leakage Current (after Clause 15))	-	100	-
16.1(General)	-	100	-
16.0(General)	-	100	-
15.3(Humidity Test)	-	2000	-
15.2(Spillage Test)	-	300	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	500	-
15.0(Moisture resistance)	-	100	-
14(Transient Over Voltages)	-	400	-
13.3(Electric Strength at operating temperature)	-	500	-
13.2(Leakage current at operating temperature)	-	500	-
13(Leakage current and electric strength at operating temperature)	-	500	-
11.3(Heating)	-	500	-
11.2(General)	-	100	-
11.1(General)	-	100	-
10.2(Current input)	-	100	-
10.1(Power input)	-	100	-
9(Starting of motor operation test requirements and tests)	-	100	-
8.1.4(Protection against live parts against protective impedance)	-	100	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	100	-
8.1.2(Protection against live parts in openings)	-	100	-
8.1.1(Protection against live parts in all positions)	-	100	-
7(Marking and instructions)	-	100	-
A.2(Earth continuity test)	-	100	-
Annex C(Ageing test on motors)	-	100	-
Annex D(Thermal motor protectors)	-	100	-
15.2(Moisture resistance)	-	100	-
19.17(Abnormal Operation, IS 302-1)	-	100	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	100	-
21.2(Mechanical Strength, IS 302-1)	-	100	-
21.3(Mechanical Strength, IS 302-1)	-	100	-
22.5(Construction)	-	100	-
22.6(Construction, IS 302-1)	-	100	-
22.11(Construction, IS 302-1)	-	100	-
22.16(Construction)	-	100	-
22.32(Construction, IS 302-1)	-	100	-
22.42(Construction)	-	100	-
23.3(Internal Wiring, IS 302-1)	-	100	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	100	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
26.5(Terminals for external conductors)	-	100	-
27.5(Provision for Earthing, IS 302-1)	-	100	-
28.1(Screws and connections)	-	100	-
22.2(Construction, IS 302-1)	-	100	-
22.3(Construction, IS 302-1)	-	100	-
B.22.4(Construction, IS 302-1)	-	100	-
B.22.5(Construction, IS 302-1)	-	200	-
12(Charging of metal-ion batteries)	-	1500	-
6(Classification- IS 302-1)	-	100	-
5(General conditions for the tests)	-	100	-
11.8(Temperature rise)	-	1000	-
11.7(Duration corresponding)	-	100	-
11.6(Combined appliances)	-	100	-
11.5(Motor-operated appliances)	-	100	-
11.4(Heating appliances)	-	100	-
8.1.5(Live parts of built-in appliances)	-	200	-
18(Endurance)	-	100	-
17(Overload protection of transformers and associated circuits)	-	600	-
16(Leakage current and electric strength)	-	200	-
4(General requirement)	-	100	-
32.1(Radiation Toxicity and Similar Hazards)	-	200	-
31(Resistance to Rusting)	-	500	-
30.2(Needle Flame Test)	-	500	-
30.2(Glow Wire Test)	-	500	-
30.1(Ball pressure test)	-	500	-
29(clearance, creepage distances and solid insulation)	-	500	-
28(Screw test and connections)	-	400	-
27.1(Provision for Earthing, IS 302-1)	-	500	-
26(Terminals for external conductors)	-	200	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
24(Components)	-	200	-
23.1(Internal Wiring, IS 302-1)	-	500	-
22.1(Construction, IS 302-1)	-	200	-
21.1(Mechanical Strength, IS 302-1)	-	700	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	400	-
19(Abnormal Operation)	-	1000	-
18(Endurance)	-	100	-
17(Over Load Protection of Transformers and associated circuits)	-	600	-
16.3(Electric Strength (after clause 15 and 16.2))	-	500	-
16.2(Leakage Current (after Clause 15))	-	500	-
16.1(General)	-	100	-
16.0(General)	-	100	-
15.3(Humidity Test)	-	500	-
15.2(Spillage Test)	-	200	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	200	-
15.0(Moisture resistance)	-	500	-
14(Transient Over Voltages)	-	100	-
13.3(Electric Strength at operating temperature)	-	500	-
13.2(Leakage current at operating temperature)	-	500	-
13(Leakage current and electric strength at operating temperature)	-	500	-
11.3(Heating)	-	1000	-
11.2(General)	-	100	-
11.1(General)	-	100	-
10.2(Current input)	-	500	-
10.1(Power input)	-	500	-
9(Starting of motor operation test requirements and tests)	-	100	-
8.1.4(Protection against live parts against protective impedance)	-	500	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	500	-
8.1.2(Protection against live parts in openings)	-	500	-
8.1.1(Protection against live parts in all positions)	-	500	-
7(Marking and instructions)	-	200	-
A.2(Earth continuity test)	-	400	-
Annex C(Ageing test on motors)	-	200	-
Annex D(Thermal motor protectors)	-	100	-
15.2(Moisture resistance)	-	500	-
19.17(Abnormal Operation, IS 302-1)	-	1000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	500	-
21.2(Mechanical Strength, IS 302-1)	-	200	-
21.3(Mechanical Strength, IS 302-1)	-	200	-
22.5(Construction)	-	100	-
22.6(Construction, IS 302-1)	-	100	-
22.11(Construction, IS 302-1)	-	200	-
22.16(Construction)	-	100	-
22.32(Construction, IS 302-1)	-	100	-
22.42(Construction)	-	100	-
23.3(Internal Wiring, IS 302-1)	-	100	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	100	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
26.5(Terminals for external conductors)	-	500	-
27.5(Provision for Earthing, IS 302-1)	-	500	-
28.1(Screws and connections)	-	400	-
22.2(Construction, IS 302-1)	-	200	-
22.3(Construction, IS 302-1)	-	200	-
B.22.4(Construction, IS 302-1)	-	100	-
B.22.5(Construction, IS 302-1)	-	100	-

26 Sep, 2028

-
Included w.e.f 25.03.2025 Exclusion: Cl 19.11.4.1 to Cl 19.11.4.7 (EMI/EMC) "Domestic Electric Clothes Washing Machines (For testing charges please refer part 2 standard in LIMS)"

IS 17293 (2020)

Electric Cables for Photovoltaic Systems for Rated Voltage 1 500 V d.c.

1151400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	1000	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	750	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	1200	-
Annex G and Table 3 of IS 17293:2020(Ozone Resistance test)	-	65000	-
IS 191 : 2007, IS 440(Copper purity test)	-	4000	-
Table 3 of IS 17293:2020 & IS 10810 (Part 63)(Smoke density test.)	-	150000	-
Cl 6.4.3 and Table 3 of IS 8130(Diameter of wire in conductor)	-	500	-
Table-3 & Annex-F of IS 17293:2020 and IS 10810 (Part 7) 1984(Elongation at low temperature (Cold Elongation))	-	7500	-
Annex H and Table 3 of IS 17293:2020(Damp Heat test)	-	35000	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	250	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	3700	-
Cl 11.2.3 & Table-3 of IS 17293:2020 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	3500	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	6000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	3500	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(IS 17293)	-	7500	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	4000	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(IS 10810-30)	-	500	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	750000	-
Annex D and Table 3 of IS 17293:2020(Dynamic Penetration test)	-	7500	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	7500	-
Annex C of IS 17293:2020 & IS:10810 (Part 21)-1984(Cold impact test)	-	1000	-
Annex - B of IS 17293:2020(Compatibility test)	-	7500	-
Table 3 of IS 17293:2020 & IS:10810 (Part 20)-1984(Cold bend test)	-	1000	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Cl 5.3 of IS 17048:2018 & IS:10810 (Part 53)-1984(Flammability Test)	-	2000	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	0	-
Cl 11.2.1 of IS 17293:2020 & IS:10810 (Part 45)-1984(High voltage test)	-	3000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Conductivity)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(Hot set test)	-	0	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	0	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	0	-
Annex - B of IS 17293:2020(Compatibility test)	-	0	-
Table 3 of IS 17293:2020 & IS:10810 (Part 12)-1984(Shrinkage test)	-	1500	-
Annex - E of IS 17293 : 2020(UV resistance)	-	35000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(pH)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Conductivity)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(HCl and HBr)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	0	-
11.2.4(Long-term Resistance of Insulation to d.c.)	-	5000	-
11.2.5(Surface Resistance of Sheath)	-	4000	-
11.3.1(Sheath Colour)	-	0	-
11.3.2(Sheath Marking)	-	0	-
11.3.3(Overall Diameters and Ovality)	-	500	-
Annex J(Assessment of Halogens)	-	0	-
5.1, 6.1, Table 11, 1.1(Properties before ageing b)	-	0	-
5.1, 6.1, Table 11, 1.2(Properties after ageing in oven)	-	0	-
5.1, 6.1, Table 11, 1.3(Hot set test b)	-	0	-
5.1, 6.1, Table 11, 1.4(Thermal endurance Test conditions b)	-	0	-
5.1, 6.1, Table 11, 1.5(Bending at low temperature)	-	0	-
5.1, 6.1, Table 11, 1.6(Elongation at low temperature Insulated conductor/cable overall diameter)	-	0	-
5.1, 6.1, Table 11, 1.7(Sheath resistance against acid and alkaline solution)	-	0	-
5.1, 6.1, Table 11, 1.8(Compatibility test)	-	0	-
5.2(Application to the Conductor)	-	0	-
6.2(Sheath application)	-	0	-
6.3(Sheath Thickness)	-	0	-
6.4(Sheath Colour)	-	0	-
7(Overall Dimension)	-	0	-
8.1(Continuity of Marking)	-	0	-
8.2(Durability)	-	500	-
8.3(Legibility)	-	0	-
9(Core Identification)	-	0	-
12(Packing and Marking)	-	0	-
4.1(Resistance)	-	1500	-
7.1.2.1, 7.2.3(Annealing)	-	500	-
Table 3, (IS 10810 Part 53)(Test for vertical flame propagation on complete cable)	-	1500	-
5.3(Thickness)	-	500	-
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	0	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	0	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	0	-
Annex G and Table 3 of IS 17293:2020(Ozone Resistance test)	-	0	-
IS 191 : 2007, IS 440(Copper purity test)	-	0	-
Table 3 of IS 17293:2020 & IS 10810 (Part 63)(Smoke density test.)	-	0	-
Cl 6.4.3 and Table 3 of IS 8130(Diameter of wire in conductor)	-	0	-
Table-3 & Annex-F of IS 17293:2020 and IS 10810 (Part 7) 1984(Elongation at low temperature (Cold Elongation))	-	0	-
Annex H and Table 3 of IS 17293:2020(Damp Heat test)	-	0	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	0	-
Cl 11.2.3 & Table-3 of IS 17293:2020 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(IS 17293)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(IS 10810-30)	-	0	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	0	-
Annex D and Table 3 of IS 17293:2020(Dynamic Penetration test)	-	0	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	0	-
Annex C of IS 17293:2020 & IS:10810 (Part 21)-1984(Cold impact test)	-	0	-
Annex - B of IS 17293:2020(Compatibility test)	-	0	-
Table 3 of IS 17293:2020 & IS:10810 (Part 20)-1984(Cold bend test)	-	0	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Cl 5.3 of IS 17048:2018 & IS:10810 (Part 53)-1984(Flammability Test)	-	2500	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	0	-
Cl 11.2.1 of IS 17293:2020 & IS:10810 (Part 45)-1984(High voltage test)	-	2000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Conductivity)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(Hot set test)	-	0	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	0	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	0	-
Annex - B of IS 17293:2020(Compatibility test)	-	0	-
Table 3 of IS 17293:2020 & IS:10810 (Part 12)-1984(Shrinkage test)	-	1500	-
Annex - E of IS 17293 : 2020(UV resistance)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(pH)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Conductivity)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(HCl and HBr)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	0	-
11.2.4(Long-term Resistance of Insulation to d.c.)	-	3500	-
11.2.5(Surface Resistance of Sheath)	-	3500	-
11.3.1(Sheath Colour)	-	0	-
11.3.2(Sheath Marking)	-	0	-
11.3.3(Overall Diameters and Ovality)	-	1000	-
Annex J(Assessment of Halogens)	-	0	-
5.1, 6.1, Table 11, 1.1(Properties before ageing b)	-	2500	-
5.1, 6.1, Table 11, 1.2(Properties after ageing in oven)	-	5000	-
5.1, 6.1, Table 11, 1.3(Hot set test b)	-	2000	-
5.1, 6.1, Table 11, 1.4(Thermal endurance Test conditions b)	-	0	-
5.1, 6.1, Table 11, 1.5(Bending at low temperature)	-	1500	-
5.1, 6.1, Table 11, 1.6(Elongation at low temperature Insulated conductor/cable overall diameter)	-	2500	-
5.1, 6.1, Table 11, 1.7(Sheath resistance against acid and alkaline solution)	-	0	-
5.1, 6.1, Table 11, 1.8(Compatibility test)	-	0	-
5.2(Application to the Conductor)	-	0	-
6.2(Sheath application)	-	0	-
6.3(Sheath Thickness)	-	1000	-
6.4(Sheath Colour)	-	0	-
7(Overall Dimension)	-	500	-
8.1(Continuity of Marking)	-	0	-
8.2(Durability)	-	500	-
8.3(Legibility)	-	0	-
9(Core Identification)	-	0	-
12(Packing and Marking)	-	0	-
4.1(Resistance)	-	0	-
7.1.2.1, 7.2.3(Annealing)	-	0	-
Table 3, (IS 10810 Part 53)(Test for vertical flame propagation on complete cable)	-	0	-
5.3(Thickness)	-	0	-
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	0	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	0	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	0	-
Annex G and Table 3 of IS 17293:2020(Ozone Resistance test)	-	0	-
IS 191 : 2007, IS 440(Copper purity test)	-	0	-
Table 3 of IS 17293:2020 & IS 10810 (Part 63)(Smoke density test.)	-	0	-
Cl 6.4.3 and Table 3 of IS 8130(Diameter of wire in conductor)	-	0	-
Table-3 & Annex-F of IS 17293:2020 and IS 10810 (Part 7) 1984(Elongation at low temperature (Cold Elongation))	-	0	-
Annex H and Table 3 of IS 17293:2020(Damp Heat test)	-	0	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	0	-
Cl 11.2.3 & Table-3 of IS 17293:2020 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(IS 17293)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(IS 10810-30)	-	0	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	0	-
Annex D and Table 3 of IS 17293:2020(Dynamic Penetration test)	-	0	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	0	-
Annex C of IS 17293:2020 & IS:10810 (Part 21)-1984(Cold impact test)	-	0	-
Annex - B of IS 17293:2020(Compatibility test)	-	0	-
Table 3 of IS 17293:2020 & IS:10810 (Part 20)-1984(Cold bend test)	-	0	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Cl 5.3 of IS 17048:2018 & IS:10810 (Part 53)-1984(Flammability Test)	-	0	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	0	-
Cl 11.2.1 of IS 17293:2020 & IS:10810 (Part 45)-1984(High voltage test)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Conductivity)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(Hot set test)	-	0	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	0	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	0	-
Annex - B of IS 17293:2020(Compatibility test)	-	0	-
Table 3 of IS 17293:2020 & IS:10810 (Part 12)-1984(Shrinkage test)	-	0	-
Annex - E of IS 17293 : 2020(UV resistance)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(pH)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Conductivity)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(HCl and HBr)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	0	-
11.2.4(Long-term Resistance of Insulation to d.c.)	-	0	-
11.2.5(Surface Resistance of Sheath)	-	0	-
11.3.1(Sheath Colour)	-	0	-
11.3.2(Sheath Marking)	-	0	-
11.3.3(Overall Diameters and Ovality)	-	0	-
Annex J(Assessment of Halogens)	-	0	-
5.1, 6.1, Table 11, 1.1(Properties before ageing b)	-	0	-
5.1, 6.1, Table 11, 1.2(Properties after ageing in oven)	-	0	-
5.1, 6.1, Table 11, 1.3(Hot set test b)	-	0	-
5.1, 6.1, Table 11, 1.4(Thermal endurance Test conditions b)	-	0	-
5.1, 6.1, Table 11, 1.5(Bending at low temperature)	-	0	-
5.1, 6.1, Table 11, 1.6(Elongation at low temperature Insulated conductor/cable overall diameter)	-	0	-
5.1, 6.1, Table 11, 1.7(Sheath resistance against acid and alkaline solution)	-	0	-
5.1, 6.1, Table 11, 1.8(Compatibility test)	-	0	-
5.2(Application to the Conductor)	-	0	-
6.2(Sheath application)	-	0	-
6.3(Sheath Thickness)	-	0	-
6.4(Sheath Colour)	-	0	-
7(Overall Dimension)	-	0	-
8.1(Continuity of Marking)	-	0	-
8.2(Durability)	-	0	-
8.3(Legibility)	-	0	-
9(Core Identification)	-	0	-
12(Packing and Marking)	-	0	-
4.1(Resistance)	-	0	-
7.1.2.1, 7.2.3(Annealing)	-	0	-
Table 3, (IS 10810 Part 53)(Test for vertical flame propagation on complete cable)	-	0	-
5.3(Thickness)	-	0	-

26 Sep, 2028

-
Included w.e.f 02.01.2025 Exclusion : Cl 11.2.2 (Spark Test)

1
2
3
Next
Last

Bureau of Indian Standards

The National Standards Body of India

Stellar Test House, Noida

G-68, Sector-63, Noida, Gautam Buddha Nagar, Uttar Pradesh, 201301

8130190099 ankit@stellartesthouse.com

Scope List