BIS - LIMS (Laboratory Information Management System)

Stellar Test House, Noida

G-68, Sector-63, Noida, Gautam Buddha Nagar, Uttar Pradesh, 201301

8130190099 ankit@stellartesthouse.com

Scope List

Reset

150 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 302 : PART 1 (Warming Plates and Similar Appliances)

Warming Plates and Similar Appliances

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
32(Radiation hazards)	-	1000	-
31(Resistance to Rusting)	-	1000	-
30(Resistance to Heat & Fire)	-	1000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	1000	-
28(Screws & Connections)	-	1000	-
27(Provision For Earthing)	-	1000	-
26(Terminals For External Conductors)	-	1000	-
25(Supply Connection & External Flexible Cords)	-	1000	-
24(Components)	-	1000	-
23(Internal Wiring)	-	1000	-
22(Construction)	-	1000	-
21(Mechanical strength)	-	1000	-
20(Stability & Mechanical Hazards)	-	1000	-
19(Abnormal Operation)	-	1000	-
18(Endurance)	-	1000	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	1000	-
16(Insulation Resistance and Electric Strength/ Leakage Current and Electric Strength)	-	1000	-
15(Moisture Resistance)	-	1000	-
14("""Radio and Television Interference Suppression / Transient Over Voltage """)	-	1000	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	1000	-
12(Operation Under Overload Conditions of Appliances with heating Element)	-	1000	-
11(Temperature Rise/ Heating)	-	1000	-
10("""Power Input & Current""")	-	1000	-
9(Starting Of Motor Operated Appliances)	-	1000	-
8(Protection against Access to Live Parts)	-	1000	-
7(Marking)	-	500	-
6(Classification)	-	500	-
5(Rating)	-	500	-

26 Sep, 2028

-
included w.e.f 01.04.2026

IS 302 : PART 1 (Water-Bed Heaters)

Water-Bed Heaters

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classifications)	-	500	-
5(General conditions for tests)	-	500	-
4(General Requirement)	-	500	-
11.8(Temperature rise)	-	1000	-
11.7(Duration corresponding)	-	1000	-
11.6(Combined appliances)	-	1000	-
11.5(Motor-operated appliances)	-	1000	-
11.4(Heating appliances)	-	1000	-
8.1.5(Live parts of built-in appliances)	-	1000	-
18(Endurance)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
16(Leakage current and electric strength)	-	1000	-
4(General requirement)	-	500	-
32(Radiation Toxicity and Similar Hazards)	-	1000	-
31(Resistance to Rusting)	-	1000	-
30.2(Needle Flame Test)	-	1000	-
30.2(Glow Wire Test)	-	1000	-
30.1(Ball pressure test)	-	1000	-
29(clearance, creepage distances and solid insulation)	-	1000	-
28(Screw test and connections)	-	1000	-
27(Provision for earthing)	-	1000	-
26(Terminals for external conductors)	-	1000	-
25(Supply connection and external flexible cords)	-	1000	-
24(Components)	-	1000	-
23(General)	-	1000	-
22(Construction verification related test)	-	1000	-
21(Mechanical Strength Test)	-	1000	-
20(Stability test)	-	1000	-
19(Abnormal Operation)	-	1000	-
18(Endurance Test requirements and tests)	-	1000	-
17(Over Load Protection of Transformers and associated circuits)	-	1000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	1000	-
16.2(Leakage Current (after Clause 15))	-	1000	-
16.1(General)	-	1000	-
16.0(General)	-	1000	-
15.3(Humidity Test)	-	1000	-
15.2(Spillage Test)	-	1000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	1000	-
15.0(General)	-	1000	-
14(Transient Over Voltages)	-	1000	-
13.3(Electric Strength at operating temperature)	-	1000	-
13.2(Leakage current at operating temperature)	-	1000	-
13.1(General)	-	1000	-
11.3(Heating)	-	1000	-
11.2(General)	-	1000	-
11.1(General)	-	1000	-
10.2(Current input)	-	1000	-
10.1(Power input)	-	1000	-
9(Starting of motor operation test requirements and tests)	-	1000	-
8.1.4(Protection against live parts against protective impedance)	-	1000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	1000	-
8.1.2(Protection against live parts in openings)	-	1000	-
8.1.1(Protection against live parts in all positions)	-	1000	-
7(Marking and instructions)	-	500	-

26 Sep, 2028

IS 302 : PART 1 (Air-Cleaning Appliances)

Air-Cleaning Appliances

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classifications)	-	500	-
5(General conditions for tests)	-	500	-
4(General Requirement)	-	500	-
11.8(Temperature rise)	-	1000	-
11.7(Duration corresponding)	-	1000	-
11.6(Combined appliances)	-	1000	-
11.5(Motor-operated appliances)	-	1000	-
11.4(Heating appliances)	-	1000	-
8.1.5(Live parts of built-in appliances)	-	1000	-
18(Endurance)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
16(Leakage current and electric strength)	-	1000	-
4(General requirement)	-	1000	-
32(Radiation Toxicity and Similar Hazards)	-	1000	-
31(Resistance to Rusting)	-	1000	-
30.2(Needle Flame Test)	-	1000	-
30.2(Glow Wire Test)	-	1000	-
30.1(Ball pressure test)	-	1000	-
29(clearance, creepage distances and solid insulation)	-	1000	-
28(Screw test and connections)	-	1000	-
27(Provision for earthing)	-	1000	-
26(Terminals for external conductors)	-	1000	-
25(Supply connection and external flexible cords)	-	1000	-
24(Components)	-	1000	-
23(General)	-	1000	-
22(Construction verification related test)	-	1000	-
21(Mechanical Strength Test)	-	1000	-
20(Stability test)	-	1000	-
19(Abnormal Operation)	-	1000	-
18(Endurance Test requirements and tests)	-	1000	-
17(Over Load Protection of Transformers and associated circuits)	-	1000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	1000	-
16.2(Leakage Current (after Clause 15))	-	1000	-
16.1(General)	-	1000	-
16.0(General)	-	1000	-
15.3(Humidity Test)	-	1000	-
15.2(Spillage Test)	-	1000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	1000	-
15.0(General)	-	1000	-
14(Transient Over Voltages)	-	1000	-
13.3(Electric Strength at operating temperature)	-	1000	-
13.2(Leakage current at operating temperature)	-	1000	-
13.1(General)	-	1000	-
11.3(Heating)	-	1000	-
11.2(General)	-	1000	-
11.1(General)	-	1000	-
11.1(General)	-	1000	-
10.2(Current input)	-	1000	-
10.2(Current input)	-	1000	-
10.1(Power input)	-	1000	-
9(Starting of motor operation test requirements and tests)	-	1000	-
8.1.4(Protection against live parts against protective impedance)	-	1000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	1000	-
8.1.2(Protection against live parts in openings)	-	1000	-
8.1.1(Protection against live parts in all positions)	-	1000	-
7(Marking and instructions)	-	1000	-

26 Sep, 2028

IS 302 : PART 1 (Whirlpool Baths and Whirlpool Spas)

Whirlpool Baths and Whirlpool Spas

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classifications)	-	500	-
5(General conditions for tests)	-	500	-
4(General Requirement)	-	500	-
11.8(Temperature rise)	-	1000	-
11.7(Duration corresponding)	-	1000	-
11.6(Combined appliances)	-	1000	-
11.5(Motor-operated appliances)	-	1000	-
11.4(Heating appliances)	-	1000	-
8.1.5(Live parts of built-in appliances)	-	1000	-
18(Endurance)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
16(Leakage current and electric strength)	-	1000	-
4(General requirement)	-	500	-
32(Radiation Toxicity and Similar Hazards)	-	1000	-
31(Resistance to Rusting)	-	1000	-
30.2(Needle Flame Test)	-	1000	-
30.2(Glow Wire Test)	-	1000	-
30.1(Ball pressure test)	-	1000	-
29(clearance, creepage distances and solid insulation)	-	1000	-
28(Screw test and connections)	-	1000	-
27(Provision for earthing)	-	1000	-
26(Terminals for external conductors)	-	1000	-
25(Supply connection and external flexible cords)	-	1000	-
24(Components)	-	1000	-
23(General)	-	1000	-
22(Construction verification related test)	-	1000	-
21(Mechanical Strength Test)	-	1000	-
20(Stability test)	-	1000	-
19(Abnormal Operation)	-	1000	-
18(Endurance Test requirements and tests)	-	1000	-
17(Over Load Protection of Transformers and associated circuits)	-	1000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	1000	-
16.2(Leakage Current (after Clause 15))	-	1000	-
16.1(General)	-	1000	-
16.0(General)	-	1000	-
15.3(Humidity Test)	-	1000	-
15.2(Spillage Test)	-	1000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	1000	-
15.0(General)	-	1000	-
14(Transient Over Voltages)	-	1000	-
13.3(Electric Strength at operating temperature)	-	1000	-
13.2(Leakage current at operating temperature)	-	1000	-
13.1(General)	-	1000	-
11.3(Heating)	-	1000	-
11.2(General)	-	1000	-
11.1(General)	-	1000	-
10.2(Current input)	-	1000	-
10.1(Power input)	-	1000	-
9(Starting of motor operation test requirements and tests)	-	1000	-
8.1.4(Protection against live parts against protective impedance)	-	1000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	1000	-
8.1.2(Protection against live parts in openings)	-	1000	-
8.1.1(Protection against live parts in all positions)	-	1000	-
7(Marking and instructions)	-	500	-

26 Sep, 2028

IS 302 : PART 1 (Massage Appliances)

Massage Appliances

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
(CI. 6 IS 302-2-32 : 1994(Classification)	-	500	-
Cl. 7 302-2-32 : 1994(Marking)	-	500	-
Cl. 8 302-2-32 : 1994(Starting of motor operated appliances)	-	1000	-
Cl. 9 302-2-32 : 1994(Protection Against Electric Shock)	-	1000	-
Cl. 10 302-2-32 : 1994(Power Input and Current)	-	1000	-
Cl. 11 302-2-32 : 1994(Temperature Rise)	-	1000	-
Cl. 13 302-2-32 : 1994(Leakage Current & Electric Strength at Operating Temperature)	-	1000	-
Cl. 14 302-2-32 : 1994(Radio and television interference suppression / Transient over voltages)	-	1000	-
Cl. 15 302-2-32: 1994(Moisture Resistance Test)	-	1000	-
Cl. 16 302-2-32 : 1994(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	1000	-
Cl. 17 302-2-32 : 1994(Overload Protection of Transformers and Associated Circuit)	-	1000	-
Cl. 18 302-2-32 : 1994(Endurance)	-	1000	-
Cl. 19 302-2-32 : 1994(Abnormal Operation)	-	1000	-
Cl. 20 302-2-32 : 1994(Stability & Mechanical Hazards)	-	1000	-
Cl. 21 302-2-32 : 1994(Mechanical strength)	-	1000	-
Cl. 22 302-2-32 : 1994(Construction)	-	1000	-
Cl. 23 302-2-32 : 1994(Internal Wiring)	-	1000	-
Cl. 24 302-2-32 : 1994(Components)	-	1000	-
Cl. 25 302-2-32 : 1994(Supply Connection & External Flexible Cords)	-	1000	-
Cl. 26 302-2-32 : 1994(Terminals for External conductors)	-	1000	-
Cl. 27 302-2-32 : 1994(Provision for Earthing)	-	1000	-
Cl. 28 302-2-32 : 1994(Screws & Connections)	-	1000	-
Cl. 29 302-2-32 : 1994(Clearances, Creepage Distances & Solid insulation)	-	1000	-
Cl. 30 302-2-32 : 1994(Resistance to Heat Fire & Tracking)	-	1000	-
Cl. 31 302-2-32 : 1994(Resistance to Rusting)	-	1000	-
Cl. 32 302-2-32 : 1994(Radiation Hazards)	-	1000	-

26 Sep, 2028

-
"1 19.11.4.7 (Harmonics) EMI/EMC Test Test facilities not available 2 19.11.4.6 (Class 3 Voltage dips and interruptions) EMI/EMC Test Test facilities not available 3 19.11.4.5 (Immunity to conducted discharges) EMI/EMC Test Test facilities not available 4 19.11.4.4 (Surge immunity test) EMI/EMC Test Test facilities not available 5 19.11.4.3 (Fast transient bursts) EMI/EMC Test Test facilities not available 6 19.11.4.2 EMI/EMC Test Test facilities not available 7 19.11.4.2 EMI/EMC Test Test facilities not available 8 19.11.4.2 EMI/EMC Test Test facilities not available 9 19.11.4.2 EMI/EMC Test Test facilities not available 10 19.11.4.2 EMI/EMC Test Test facilities not available 11 19.11.4.2 EMI/EMC Test Test facilities not available 12 19.11.4.2 EMI/EMC Test Test facilities not available 13 19.11.4.2 (Radiated fields) EMI/EMC Test Test facilities not available 14 19.11.4.1 (Electrostatic discharges) EMI/EMC Test Test facilities not available" 15 32 (Radiation Toxicity and Similar Hazards) 16 24 (Components)

IS 302 : PART 1 (Commercial Electric Dishwashing Machines)

Commercial Electric Dishwashing Machines

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classifications)	-	500	-
5(General conditions for tests)	-	500	-
4(General Requirement)	-	500	-
11.8(Temperature rise)	-	1000	-
11.7(Duration corresponding)	-	1000	-
11.6(Combined appliances)	-	1000	-
11.5(Motor-operated appliances)	-	1000	-
11.4(Heating appliances)	-	1000	-
8.1.5(Live parts of built-in appliances)	-	1000	-
18(Endurance)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
16(Leakage current and electric strength)	-	1000	-
4(General requirement)	-	500	-
32(Radiation Toxicity and Similar Hazards)	-	1000	-
31(Resistance to Rusting)	-	1000	-
30.2(Needle Flame Test)	-	1000	-
30.2(Glow Wire Test)	-	1000	-
30.1(Ball pressure test)	-	1000	-
29(clearance, creepage distances and solid insulation)	-	1000	-
28(Screw test and connections)	-	1000	-
27(Provision for earthing)	-	1000	-
26(Terminals for external conductors)	-	1000	-
25(Supply connection and external flexible cords)	-	1000	-
24(Components)	-	1000	-
23(General)	-	1000	-
22(Construction verification related test)	-	1000	-
21(Mechanical Strength Test)	-	1000	-
20(Stability test)	-	1000	-
19(Abnormal Operation)	-	1000	-
18(Endurance Test requirements and tests)	-	1000	-
17(Over Load Protection of Transformers and associated circuits)	-	1000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	1000	-
16.2(Leakage Current (after Clause 15))	-	1000	-
16.1(General)	-	1000	-
16.0(General)	-	1000	-
15.3(Humidity Test)	-	1000	-
15.2(Spillage Test)	-	1000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	1000	-
15.0(General)	-	1000	-
14(Transient Over Voltages)	-	1000	-
13.3(Electric Strength at operating temperature)	-	1000	-
13.2(Leakage current at operating temperature)	-	1000	-
13.1(General)	-	1000	-
11.3(Heating)	-	1000	-
11.2(General)	-	1000	-
11.1(General)	-	1000	-
10.2(Current input)	-	1000	-
10.1(Power input)	-	1000	-
9(Starting of motor operation test requirements and tests)	-	1000	-
8.1.4(Protection against live parts against protective impedance)	-	1000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	1000	-
8.1.2(Protection against live parts in openings)	-	1000	-
8.1.1(Protection against live parts in all positions)	-	1000	-
7(Marking and instructions)	-	500	-

26 Sep, 2028

IS 302 : PART 1 (Dishwashers)

Dishwashers

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classifications)	-	500	-
5(General conditions for tests)	-	500	-
4(General Requirement)	-	500	-
11.8(Temperature rise)	-	1000	-
11.7(Duration corresponding)	-	1000	-
11.6(Combined appliances)	-	1000	-
11.5(Motor-operated appliances)	-	1000	-
11.4(Heating appliances)	-	1000	-
8.1.5(Live parts of built-in appliances)	-	1000	-
18(Endurance)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
16(Leakage current and electric strength)	-	1000	-
4(General requirement)	-	500	-
32(Radiation Toxicity and Similar Hazards)	-	1000	-
31(Resistance to Rusting)	-	1000	-
30.2(Needle Flame Test)	-	1000	-
30.2(Glow Wire Test)	-	1000	-
30.1(Ball pressure test)	-	1000	-
29(clearance, creepage distances and solid insulation)	-	1000	-
28(Screw test and connections)	-	1000	-
27(Provision for earthing)	-	1000	-
26(Terminals for external conductors)	-	1000	-
25(Supply connection and external flexible cords)	-	1000	-
24(Components)	-	1000	-
23(General)	-	1000	-
22(Construction verification related test)	-	1000	-
21(Mechanical Strength Test)	-	1000	-
20(Stability test)	-	1000	-
19(Abnormal Operation)	-	1000	-
18(Endurance Test requirements and tests)	-	1000	-
17(Over Load Protection of Transformers and associated circuits)	-	1000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	1000	-
16.2(Leakage Current (after Clause 15))	-	1000	-
16.1(General)	-	1000	-
16.0(General)	-	1000	-
15.3(Humidity Test)	-	1000	-
15.2(Spillage Test)	-	1000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	1000	-
15.0(General)	-	1000	-
14(Transient Over Voltages)	-	1000	-
13.3(Electric Strength at operating temperature)	-	1000	-
13.2(Leakage current at operating temperature)	-	1000	-
13.1(General)	-	1000	-
11.3(Heating)	-	1000	-
11.2(General)	-	1000	-
11.1(General)	-	1000	-
10.2(Current input)	-	1000	-
10.1(Power input)	-	1000	-
9(Starting of motor operation test requirements and tests)	-	1000	-
8.1.4(Protection against live parts against protective impedance)	-	1000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	1000	-
8.1.2(Protection against live parts in openings)	-	1000	-
8.1.1(Protection against live parts in all positions)	-	1000	-
7(Marking and instructions)	-	1000	-

26 Sep, 2028

IS 302 : PART 1 (Toilet Appliances)

Toilet Appliances

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classifications)	-	500	-
5(General conditions for tests)	-	500	-
4(General Requirement)	-	500	-
11.8(Temperature rise)	-	500	-
11.7(Duration corresponding)	-	500	-
11.6(Combined appliances)	-	500	-
11.5(Motor-operated appliances)	-	500	-
11.4(Heating appliances)	-	500	-
8.1.5(Live parts of built-in appliances)	-	1000	-
18(Endurance)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
16(Leakage current and electric strength)	-	1000	-
4(General requirement)	-	1000	-
32(Radiation Toxicity and Similar Hazards)	-	1000	-
31(Resistance to Rusting)	-	1000	-
30.2(Needle Flame Test)	-	1000	-
30.2(Glow Wire Test)	-	1000	-
30.1(Ball pressure test)	-	1000	-
29(clearance, creepage distances and solid insulation)	-	1000	-
28(Screw test and connections)	-	1000	-
27(Provision for earthing)	-	1000	-
26(Terminals for external conductors)	-	1000	-
25(Supply connection and external flexible cords)	-	1000	-
24(Components)	-	1000	-
23(General)	-	1000	-
22(Construction verification related test)	-	1000	-
21(Mechanical Strength Test)	-	1000	-
20(Stability test)	-	1000	-
19(Abnormal Operation)	-	1000	-
18(Endurance Test requirements and tests)	-	1000	-
17(Over Load Protection of Transformers and associated circuits)	-	1000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	1000	-
16.2(Leakage Current (after Clause 15))	-	1000	-
16.1(General)	-	1000	-
16.0(General)	-	1000	-
15.3(Humidity Test)	-	1000	-
15.2(Spillage Test)	-	1000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	1000	-
15.0(General)	-	1000	-
14(Transient Over Voltages)	-	1000	-
13.3(Electric Strength at operating temperature)	-	1000	-
13.2(Leakage current at operating temperature)	-	1000	-
13.1(General)	-	1000	-
11.3(Heating)	-	1000	-
11.1(General)	-	1000	-
10.2(Current input)	-	1000	-
10.1(Power input)	-	1000	-
9(Starting of motor operation test requirements and tests)	-	1000	-
8.1.4(Protection against live parts against protective impedance)	-	1000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	1000	-
8.1.2(Protection against live parts in openings)	-	1000	-
8.1.1(Protection against live parts in all positions)	-	1000	-
7(Marking and instructions)	-	1000	-

26 Sep, 2028

-
Included w.e.f. 18.06.2026 19.11.4.7 (Harmonics) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.4 (Surge immunity test) 19.11.4.3 (Fast transient bursts) 19.11.4.2 (Radiated fields) 19.11.4.1 (Electrostatic discharges)"

IS 302 : PART 1 (Vaporizers)

Vaporizers

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classifications)	-	500	-
5(General conditions for tests)	-	500	-
4(General Requirement)	-	500	-
11.8(Temperature rise)	-	1000	-
11.7(Duration corresponding)	-	1000	-
11.6(Combined appliances)	-	1000	-
11.5(Motor-operated appliances)	-	1000	-
11.4(Heating appliances)	-	1000	-
8.1.5(Live parts of built-in appliances)	-	1000	-
18(Endurance)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
16(Leakage current and electric strength)	-	1000	-
4(General requirement)	-	1000	-
32(Radiation Toxicity and Similar Hazards)	-	1000	-
31(Resistance to Rusting)	-	1000	-
30.2(Needle Flame Test)	-	1000	-
30.2(Glow Wire Test)	-	1000	-
30.1(Ball pressure test)	-	1000	-
29(clearance, creepage distances and solid insulation)	-	1000	-
28(Screw test and connections)	-	1000	-
27(Provision for earthing)	-	1000	-
26(Terminals for external conductors)	-	1000	-
25(Supply connection and external flexible cords)	-	1000	-
24(Components)	-	1000	-
23(General)	-	1000	-
22(Construction verification related test)	-	1000	-
21(Mechanical Strength Test)	-	1000	-
20(Stability test)	-	1000	-
19(Abnormal Operation)	-	1000	-
18(Endurance Test requirements and tests)	-	1000	-
17(Over Load Protection of Transformers and associated circuits)	-	1000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	1000	-
16.2(Leakage Current (after Clause 15))	-	1000	-
16.1(General)	-	1000	-
16.0(General)	-	1000	-
15.3(Humidity Test)	-	1000	-
15.2(Spillage Test)	-	1000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	1000	-
15.0(General)	-	1000	-
14(Transient Over Voltages)	-	1000	-
13.3(Electric Strength at operating temperature)	-	1000	-
13.2(Leakage current at operating temperature)	-	1000	-
13.1(General)	-	1000	-
11.3(Heating)	-	1000	-
11.2(General)	-	1000	-
11.1(General)	-	1000	-
10.2(Current input)	-	1000	-
10.1(Power input)	-	1000	-
9(Starting of motor operation test requirements and tests)	-	1000	-
8.1.4(Protection against live parts against protective impedance)	-	1000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	1000	-
8.1.2(Protection against live parts in openings)	-	1000	-
8.1.1(Protection against live parts in all positions)	-	1000	-
7(Marking and instructions)	-	1000	-

26 Sep, 2028

IS 302 : PART 1 (Commercial Vacuum Packaging Appliances)

Commercial Vacuum Packaging Appliances

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classifications)	-	500	-
5(General conditions for tests)	-	500	-
11.8(Temperature rise)	-	1000	-
11.7(Duration corresponding)	-	1000	-
11.6(Combined appliances)	-	1000	-
11.5(Motor-operated appliances)	-	1000	-
11.4(Heating appliances)	-	1000	-
8.1.5(Live parts of built-in appliances)	-	1000	-
18(Endurance)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
16(Leakage current and electric strength)	-	1000	-
4(General requirement)	-	500	-
32(Radiation Toxicity and Similar Hazards)	-	500	-
31(Resistance to Rusting)	-	1000	-
30.2(Needle Flame Test)	-	1000	-
30.2(Glow Wire Test)	-	1000	-
30.1(Ball pressure test)	-	1000	-
29(clearance, creepage distances and solid insulation)	-	1000	-
28(Screw test and connections)	-	1000	-
27(Provision for earthing)	-	1000	-
26(Terminals for external conductors)	-	1000	-
25(Supply connection and external flexible cords)	-	1000	-
24(Components)	-	1000	-
23(General)	-	1000	-
22(Construction verification related test)	-	1000	-
21(Mechanical Strength Test)	-	1000	-
20(Stability test)	-	1000	-
19(Abnormal Operation)	-	1000	-
18(Endurance Test requirements and tests)	-	1000	-
17(Over Load Protection of Transformers and associated circuits)	-	1000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	1000	-
16.2(Leakage Current (after Clause 15))	-	1000	-
16.1(General)	-	1000	-
16.0(General)	-	1000	-
15.3(Humidity Test)	-	1000	-
15.2(Spillage Test)	-	1000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	1000	-
15.0(General)	-	1000	-
14(Transient Over Voltages)	-	1000	-
13.3(Electric Strength at operating temperature)	-	1000	-
13.2(Leakage current at operating temperature)	-	1000	-
13.1(General)	-	1000	-
11.3(Heating)	-	1000	-
11.2(General)	-	1000	-
11.1(General)	-	1000	-
10.2(Current input)	-	1000	-
10.1(Power input)	-	1000	-
9(Starting of motor operation test requirements and tests)	-	1000	-
8.1.4(Protection against live parts against protective impedance)	-	1000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	1000	-
8.1.2(Protection against live parts in openings)	-	1000	-
8.1.1(Protection against live parts in all positions)	-	1000	-
7(Marking and instructions)	-	500	-

26 Sep, 2028

IS 302 : PART 1 (Oral Hygiene Appliances)

Oral Hygiene Appliances

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classifications)	-	500	-
5(General conditions for tests)	-	500	-
4(General Requirement)	-	500	-
6(Classifications)	-	500	-
5(General conditions for tests)	-	500	-
4(General Requirement)	-	500	-
11.8(Temperature rise)	-	1000	-
11.7(Duration corresponding)	-	1000	-
11.6(Combined appliances)	-	1000	-
11.5(Motor-operated appliances)	-	1000	-
11.4(Heating appliances)	-	1000	-
8.1.5(Live parts of built-in appliances)	-	1000	-
18(Endurance)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
16(Leakage current and electric strength)	-	1000	-
4(General requirement)	-	500	-
32(Radiation Toxicity and Similar Hazards)	-	1000	-
31(Resistance to Rusting)	-	1000	-
30.2(Needle Flame Test)	-	1000	-
30.2(Glow Wire Test)	-	1000	-
30.1(Ball pressure test)	-	1000	-
29(clearance, creepage distances and solid insulation)	-	1000	-
28(Screw test and connections)	-	1000	-
27(Provision for earthing)	-	1000	-
26(Terminals for external conductors)	-	1000	-
25(Supply connection and external flexible cords)	-	1000	-
24(Components)	-	1000	-
23(General)	-	1000	-
22(Construction verification related test)	-	1000	-
21(Mechanical Strength Test)	-	1000	-
20(Stability test)	-	1000	-
19(Abnormal Operation)	-	1000	-
18(Endurance Test requirements and tests)	-	1000	-
17(Over Load Protection of Transformers and associated circuits)	-	1000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	1000	-
16.2(Leakage Current (after Clause 15))	-	1000	-
16.1(General)	-	1000	-
16.0(General)	-	1000	-
15.3(Humidity Test)	-	1000	-
15.2(Spillage Test)	-	1000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	1000	-
15.0(General)	-	1000	-
14(Transient Over Voltages)	-	1000	-
13.3(Electric Strength at operating temperature)	-	1000	-
13.2(Leakage current at operating temperature)	-	1000	-
13.1(General)	-	1000	-
11.3(Heating)	-	1000	-
11.2(General)	-	1000	-
11.1(General)	-	1000	-
10.2(Current input)	-	1000	-
10.1(Power input)	-	1000	-
9(Starting of motor operation test requirements and tests)	-	1000	-
8.1.4(Protection against live parts against protective impedance)	-	1000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	1000	-
8.1.2(Protection against live parts in openings)	-	1000	-
8.1.1(Protection against live parts in all positions)	-	1000	-
7(Marking and instructions)	-	500	-

26 Sep, 2028

-
Included w.e.f. 18.06.2026 19.11.4.7 (Harmonics) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.4 (Surge immunity test) 19.11.4.3 (Fast transient bursts) 19.11.4.2 (Radiated fields) 19.11.4.1 (Electrostatic discharges) 19.11.4.7 (Harmonics) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.5 19.11.4.4 (Surge immunity test) 19.11.4.3 (Fast transient bursts) 19.11.4.2 (Radiated fields) 19.11.4.1 (Electrostatic discharges)"

IS 302 : PART 1 (Clothes Dryers and Towel Rails)

Clothes Dryers and Towel Rails

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classifications)	-	500	-
5(General conditions for tests)	-	500	-
4(General Requirement)	-	500	-
11.8(Temperature rise)	-	1000	-
11.7(Duration corresponding)	-	1000	-
11.6(Combined appliances)	-	1000	-
11.5(Motor-operated appliances)	-	1000	-
11.4(Heating appliances)	-	1000	-
8.1.5(Live parts of built-in appliances)	-	1000	-
18(Endurance)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
16(Leakage current and electric strength)	-	1000	-
4(General requirement)	-	1000	-
32(Radiation Toxicity and Similar Hazards)	-	500	-
31(Resistance to Rusting)	-	1000	-
30.2(Needle Flame Test)	-	1000	-
30.2(Glow Wire Test)	-	1000	-
30.1(Ball pressure test)	-	1000	-
29(clearance, creepage distances and solid insulation)	-	1000	-
28(Screw test and connections)	-	1000	-
27(Provision for earthing)	-	1000	-
26(Terminals for external conductors)	-	1000	-
25(Supply connection and external flexible cords)	-	1000	-
24(Components)	-	1000	-
23(General)	-	1000	-
22(Construction verification related test)	-	1000	-
21(Mechanical Strength Test)	-	1000	-
20(Stability test)	-	1000	-
19(Abnormal Operation)	-	1000	-
18(Endurance Test requirements and tests)	-	1000	-
17(Over Load Protection of Transformers and associated circuits)	-	1000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	1000	-
16.2(Leakage Current (after Clause 15))	-	1000	-
16.1(General)	-	1000	-
16.0(General)	-	1000	-
15.3(Humidity Test)	-	1000	-
15.2(Spillage Test)	-	1000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	1000	-
15.0(General)	-	1000	-
14(Transient Over Voltages)	-	1000	-
13.3(Electric Strength at operating temperature)	-	1000	-
13.2(Leakage current at operating temperature)	-	1000	-
13.1(General)	-	1000	-
11.3(Heating)	-	1000	-
11.2(General)	-	1000	-
11.1(General)	-	1000	-
10.2(Current input)	-	1000	-
10.1(Power input)	-	1000	-
9(Starting of motor operation test requirements and tests)	-	1000	-
8.1.4(Protection against live parts against protective impedance)	-	1000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	1000	-
8.1.2(Protection against live parts in openings)	-	1000	-
8.1.1(Protection against live parts in all positions)	-	1000	-

26 Sep, 2028

IS 302 : PART 1 (Spin Extractors)

Spin Extractors

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
31(RESISTANCE TO RUSTING)	-	1000	-
30(RESISTANCE TO HEAT, FIRE AND TRACKING)	-	1000	-
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	1000	-
28(SCREWS AND CONNECTIONS)	-	500	-
27(PROVISION FOR EARTHING)	-	500	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	1000	-
24(COMPONENTS)	-	1000	-
23(INTERNAL WIRING)	-	1000	-
22(CONSTRUCTION)	-	1000	-
21(MECHANICAL STRENGTH)	-	1000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	1000	-
19(ABNORMAL OPERATION)	-	1000	-
17(OVERLOAD PROTECTION)	-	1000	-
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH (AFTER HUMIDITY TREATMENT))	-	1000	-
15(MOISTURE RESISTANCE)	-	1000	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	1000	-
11(HEATING)	-	1000	-
10(INPUT AND CURRENT)	-	1000	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	1000	-
8(PROTECTION AGAINST ELECTRIC SHOCK)	-	1000	-
7(MARKING)	-	500	-
6(CLASSIFICATION)	-	500	-
5(RATING)	-	500	-
4(GENERAL NOTES ON TESTS)	-	500	-
3(GENERAL REQUIREMENTS)	-	500	-

26 Sep, 2028

-
1. 19.11.4.7 (Harmonics) EMI/EMC Test Test facilities not available. 2. 19.11.4.6 (Class 3 Voltage dips and interruptions) EMI/EMC Test Test facilities not available. 3. 19.11.4.5 (Immunity to conducted discharges) EMI/EMC Test Test facilities not available. 4. 19.11.4.4 (Surge immunity test) EMI/EMC Test Test facilities not available. 5. 19.11.4.3 (Fast transient bursts) EMI/EMC Test Test facilities not available. 6. 19.11.4.2 (Radiated fields) EMI/EMC Test Test facilities not available. 7. 19.11.4.1 (Electrostatic discharges) EMI/EMC Test Test facilities not available. 8. 14 (RADIO AND TELEVISION INTERFERENCE SUPPRESSION) EMI/EMC Test Test facilities not available."

IS 15489 (2024)

Paint, Plastic Emulsion —Specification

All Grade / Type / Size / Designation

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6.1(Composition)	-	3500	-
Cl-6.7(Fastness to Light)	-	1500	-
Cl-6.9(Lead Restriction)	-	1500	-
Cl-6.10, Table-1 (v)(Colour)	-	1000	-
Cl-6.2(Conditions in the Container)	-	0	-
Cl-6.3(Thinning)	-	0	-
Cl-6.4(Application Properties)	-	1500	-
Cl-6.10, Table-1 (vii)(Resistance to alkali)	-	1500	-
Cl-6.10, Table-1 (x)(Recoating properties)	-	1500	-
Cl-6.10, Table-1 (xi)(Volatile organic compound, gm/litre)	-	1500	-
Cl-6.5(Mass in kg/10 litres)	-	500	-
Cl-6.6(Opacity)	-	1500	-
Cl-6.8.1(Registered Sample)	-	1000	-
Cl-6.8.2(Sample from Bulk Supply)	-	1000	-
Cl-6.10, Table-1 (i)(Consistency)	-	1000	-
Cl-6.10, Table-1 (ii)("Drying time, Max a) Surface dry b) Hard dry:")	-	2000	-
Cl-6.10, Table-1 (iii)(Finish)	-	500	-
Cl-6.10, Table-1 (iv)(Gloss at 60°: Class A, B, C, D)	-	1500	-
Cl-6.10, Table-1 (vi)(Fastness to light)	-	1500	-
Cl-6.10, Table-1 (viii)(Washability and cleanability)	-	1000	-
Cl-6.10, Table-1 (ix)(Accelerated storage stability)	-	1500	-
Cl-6.12(Additional Optional Requirements for ECO-Mark)	-	0	-
Cl-6.12.2(Specific Requirements)	-	0	-

26 Sep, 2028

-
Included w.e.f. 22.06.2026

IS 302 : PART 1 (Insect Killers)

Insect Killers

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classifications)	-	500	-
5(General conditions for tests)	-	500	-
4(General Requirement)	-	500	-
11.8(Temperature rise)	-	500	-
11.7(Duration corresponding)	-	500	-
11.6(Combined appliances)	-	500	-
11.5(Motor-operated appliances)	-	500	-
11.4(Heating appliances)	-	500	-
8.1.5(Live parts of built-in appliances)	-	500	-
18(Endurance)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
16(Leakage current and electric strength)	-	1000	-
4(General requirement)	-	500	-
32(Radiation Toxicity and Similar Hazards)	-	500	-
31(Resistance to Rusting)	-	1000	-
30.2(Needle Flame Test)	-	1000	-
30.2(Glow Wire Test)	-	1000	-
30.1(Ball pressure test)	-	1000	-
29(clearance, creepage distances and solid insulation)	-	1000	-
28(Screw test and connections)	-	1000	-
27(Provision for earthing)	-	1000	-
26(Terminals for external conductors)	-	1000	-
25(Supply connection and external flexible cords)	-	1000	-
24(Components)	-	500	-
23(General)	-	500	-
22(Construction verification related test)	-	1000	-
21(Mechanical Strength Test)	-	1000	-
20(Stability test)	-	1000	-
19(Abnormal Operation)	-	1000	-
18(Endurance Test requirements and tests)	-	1000	-
17(Over Load Protection of Transformers and associated circuits)	-	1000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	1000	-
16.2(Leakage Current (after Clause 15))	-	1000	-
16.1(General)	-	1000	-
16.0(General)	-	1000	-
15.3(Humidity Test)	-	1000	-
15.2(Spillage Test)	-	1000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	1000	-
15.0(General)	-	1000	-
14(Transient Over Voltages)	-	1000	-
13.3(Electric Strength at operating temperature)	-	1000	-
13.2(Leakage current at operating temperature)	-	1000	-
13.1(General)	-	1000	-
11.3(Heating)	-	1000	-
11.2(General)	-	1000	-
11.1(General)	-	1000	-
10.2(Current input)	-	1000	-
10.1(Power input)	-	1000	-
9(Starting of motor operation test requirements and tests)	-	1000	-
8.1.4(Protection against live parts against protective impedance)	-	1000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	1000	-
8.1.2(Protection against live parts in openings)	-	1000	-
8.1.1(Protection against live parts in all positions)	-	1000	-
7(Marking and instructions)	-	500	-

26 Sep, 2028

-
1. 19.11.4.7 (Harmonics) EMI/EMC Test Test facilities not available 2. 19.11.4.6 (Class 3 Voltage dips and interruptions) EMI/EMC Test Test facilities not available 3. 19.11.4.5 (Immunity to conducted discharges) EMI/EMC Test Test facilities not available 4. 19.11.4.4 (Surge immunity test) EMI/EMC Test Test facilities not available 5. 19.11.4.3 (Fast transient bursts) EMI/EMC Test Test facilities not available 6. 19.11.4.2 (Radiated fields) EMI/EMC Test Test facilities not available 7. 19.11.4.1 (Electrostatic discharges) EMI/EMC Test Test facilities not available"

IS 302 : PART 1 (Electric Centrifugal Juicers)

Electric Centrifugal Juicers

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
29(Clearances, Creepage distances and Solid Insulation)	-	1000	-
27(Provision for Earthing)	-	1000	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	500	-
4(GENERAL REQUIREMENTS)	-	500	-
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	1000	-
31(Resistance of Rusting, IS 302-1)	-	1000	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	1000	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	1000	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
28(Screws & Connections, IS 302-1)	-	1000	-
27.5(Provision for Earthing, IS 302-1)	-	1000	-
27.4(Provision for Earthing, IS 302-1)	-	1000	-
27.3(Provision for Earthing, IS 302-1)	-	1000	-
27.2(Provision for Earthing, IS 302-1)	-	1000	-
27(Provision for Earthing, IS 302-1)	-	1000	-
26(Terminals for External Conductors, IS 302-1)	-	1000	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
24.6(Components, IS 302-1)	-	1000	-
24.5(Components, IS 302-1)	-	1000	-
24.2(Components, IS 302-1)	-	1000	-
24.1(Components, IS 302-1)	-	1000	-
23.10(Internal Wiring, IS 302-1)	-	1000	-
23.9(Internal Wiring, IS 302-1)	-	1000	-
23.8(Internal Wiring, IS 302-1)	-	1000	-
23.7(Internal Wiring, IS 302-1)	-	1000	-
23.6(Internal Wiring, IS 302-1)	-	1000	-
23.5(Internal Wiring, IS 302-1)	-	1000	-
23.4(Internal Wiring, IS 302-1)	-	1000	-
23.3(Internal Wiring, IS 302-1)	-	1000	-
23.2(Internal Wiring, IS 302-1)	-	1000	-
23.1(Internal Wiring, IS 302-1)	-	1000	-
22.101(Construction)	-	1000	-
22(Construction, IS 302-1)	-	1000	-
21.2(Mechanical Strength, IS 302-1)	-	1000	-
21.1(Mechanical Strength, IS 302-1)	-	1000	-
20.116(Stability & Mechanical Hazards)	-	1000	-
20.115(Stability & Mechanical Hazards)	-	1000	-
20.114(Stability & Mechanical Hazards)	-	1000	-
20.113(Stability & Mechanical Hazards)	-	1000	-
20.112(Stability & Mechanical Hazards)	-	1000	-
20.111(Stability & Mechanical Hazards)	-	1000	-
20.110(Stability & Mechanical Hazards)	-	1000	-
20.109(Stability & Mechanical Hazards)	-	1000	-
20.108(Slicing machines shall incorporate a guard surrounding the circular knife, its open sector being no larger than required for using the appliance Knife guards shall be non-detachable unless the motor cannot be switched on after their removal. It shall not be possible to operate interlocks by means of test probe B of IS 1401. Appliance shall satisfy requirements as per Cl. 20.108 of IS 302-2-14-2009)	-	1000	-
20.107(Stability & Mechanical Hazards)	-	1000	-
20.106(Stability & Mechanical Hazards)	-	1000	-
20.105(Stability & Mechanical Hazards)	-	1000	-
20.104(Stability & Mechanical Hazards)	-	1000	-
20.103(Stability & Mechanical Hazards)	-	1000	-
20.102(Stability & Mechanical Hazards)	-	1000	-
20.101(Stability & Mechanical Hazards)	-	1000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
19.1(Abnormal Operation, IS 302-1)	-	1000	-
19.9(Abnormal Operation, IS 302-1)	-	1000	-
19.8(Abnormal Operation, IS 302-1)	-	1000	-
19.7(Abnormal Operation, IS 302-1)	-	1000	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	1000	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
15(Moisture Resistance, IS 302-1)	-	1000	-
15.2(Moisture Resistance, IS 302-1)	-	1000	-
15.1(Moisture Resistance, IS 302-1)	-	1000	-
14(Transient Over Voltages, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
10(Power Input and Current, IS 302-1)	-	1000	-
8(Protection Against Electric Shock, IS 302-1)	-	1000	-
7.15(Marking- IS 302-1)	-	1000	-
7.14(Marking- IS 302-1)	-	1000	-
7.13(Marking- IS 302-1)	-	1000	-
7.12(Marking- IS 302-1)	-	1000	-
7.11(Marking- IS 302-1)	-	1000	-
7.8(Marking- IS 302-1)	-	1000	-
7.7(Marking- IS 302-1)	-	1000	-
7.6(Marking- IS 302-1)	-	1000	-
7.4(Marking- IS 302-1)	-	1000	-
7.3(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
6(Classification- IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
6(Classification- IS 302-1)	-	500	-
29(Clearances, Creepage distances and Solid Insulation)	-	1000	-
27(Provision for Earthing)	-	1000	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	500	-
4(GENERAL REQUIREMENTS)	-	500	-
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	1000	-
31(Resistance of Rusting, IS 302-1)	-	1000	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	1000	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	1000	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
28(Screws & Connections, IS 302-1)	-	1000	-
27.5(Provision for Earthing, IS 302-1)	-	1000	-
27.4(Provision for Earthing, IS 302-1)	-	1000	-
27.3(Provision for Earthing, IS 302-1)	-	1000	-
27.2(Provision for Earthing, IS 302-1)	-	1000	-
27(Provision for Earthing, IS 302-1)	-	1000	-
26(Terminals for External Conductors, IS 302-1)	-	1000	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
24.6(Components, IS 302-1)	-	1000	-
24.5(Components, IS 302-1)	-	1000	-
24.2(Components, IS 302-1)	-	1000	-
24.1(Components, IS 302-1)	-	1000	-
23.10(Internal Wiring, IS 302-1)	-	1000	-
23.9(Internal Wiring, IS 302-1)	-	1000	-
23.8(Internal Wiring, IS 302-1)	-	1000	-
23.7(Internal Wiring, IS 302-1)	-	1000	-
23.6(Internal Wiring, IS 302-1)	-	1000	-
23.5(Internal Wiring, IS 302-1)	-	1000	-
23.4(Internal Wiring, IS 302-1)	-	1000	-
23.3(Internal Wiring, IS 302-1)	-	1000	-
23.2(Internal Wiring, IS 302-1)	-	1000	-
23.1(Internal Wiring, IS 302-1)	-	1000	-
22.101(Construction)	-	1000	-
22(Construction, IS 302-1)	-	1000	-
21.2(Mechanical Strength, IS 302-1)	-	1000	-
21.1(Mechanical Strength, IS 302-1)	-	1000	-
20.116(Stability & Mechanical Hazards)	-	1000	-
20.115(Stability & Mechanical Hazards)	-	1000	-
20.114(Stability & Mechanical Hazards)	-	1000	-
20.113(Stability & Mechanical Hazards)	-	1000	-
20.112(Stability & Mechanical Hazards)	-	1000	-
20.111(Stability & Mechanical Hazards)	-	1000	-
20.110(Stability & Mechanical Hazards)	-	1000	-
20.109(Stability & Mechanical Hazards)	-	1000	-
20.108(Slicing machines shall incorporate a guard surrounding the circular knife, its open sector being no larger than required for using the appliance Knife guards shall be non-detachable unless the motor cannot be switched on after their removal. It shall not be possible to operate interlocks by means of test probe B of IS 1401. Appliance shall satisfy requirements as per Cl. 20.108 of IS 302-2-14-2009)	-	1000	-
20.107(Stability & Mechanical Hazards)	-	1000	-
20.106(Stability & Mechanical Hazards)	-	1000	-
20.105(Stability & Mechanical Hazards)	-	1000	-
20.104(Stability & Mechanical Hazards)	-	1000	-
20.103(Stability & Mechanical Hazards)	-	1000	-
20.102(Stability & Mechanical Hazards)	-	1000	-
20.101(Stability & Mechanical Hazards)	-	1000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
19.1(Abnormal Operation, IS 302-1)	-	1000	-
19.9(Abnormal Operation, IS 302-1)	-	1000	-
19.8(Abnormal Operation, IS 302-1)	-	1000	-
19.7(Abnormal Operation, IS 302-1)	-	1000	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	1000	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
15(Moisture Resistance, IS 302-1)	-	1000	-
15.2(Moisture Resistance, IS 302-1)	-	1000	-
15.1(Moisture Resistance, IS 302-1)	-	1000	-
14(Transient Over Voltages, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
10(Power Input and Current, IS 302-1)	-	1000	-
8(Protection Against Electric Shock, IS 302-1)	-	1000	-
7.15(Marking- IS 302-1)	-	500	-
7.14(Marking- IS 302-1)	-	500	-
7.13(Marking- IS 302-1)	-	500	-
7.12(Marking- IS 302-1)	-	500	-
7.11(Marking- IS 302-1)	-	500	-
7.8(Marking- IS 302-1)	-	500	-
7.7(Marking- IS 302-1)	-	500	-
7.6(Marking- IS 302-1)	-	500	-
7.4(Marking- IS 302-1)	-	500	-
7.3(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
6(Classification- IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
6(Classification- IS 302-1)	-	500	-
22.102(Construction)	-	500	-
19.102(Abnormal Operation)	-	500	-
19.101(Abnormal Operation)	-	500	-
7.101(Marking)	-	500	-
29(Clearances, Creepage distances and Solid Insulation)	-	-	-
27(Provision for Earthing)	-	-	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	-	-
4(GENERAL REQUIREMENTS)	-	-	-
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	-	-
31(Resistance of Rusting, IS 302-1)	-	-	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	-	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	-	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	-	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	-	-
28(Screws & Connections, IS 302-1)	-	-	-
27.5(Provision for Earthing, IS 302-1)	-	-	-
27.4(Provision for Earthing, IS 302-1)	-	-	-
27.3(Provision for Earthing, IS 302-1)	-	-	-
27.2(Provision for Earthing, IS 302-1)	-	-	-
27(Provision for Earthing, IS 302-1)	-	-	-
26(Terminals for External Conductors, IS 302-1)	-	-	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
24.6(Components, IS 302-1)	-	-	-
24.5(Components, IS 302-1)	-	-	-
24.2(Components, IS 302-1)	-	-	-
24.1(Components, IS 302-1)	-	-	-
23.10(Internal Wiring, IS 302-1)	-	-	-
23.9(Internal Wiring, IS 302-1)	-	-	-
23.8(Internal Wiring, IS 302-1)	-	-	-
23.7(Internal Wiring, IS 302-1)	-	-	-
23.6(Internal Wiring, IS 302-1)	-	-	-
23.5(Internal Wiring, IS 302-1)	-	-	-
23.4(Internal Wiring, IS 302-1)	-	-	-
23.3(Internal Wiring, IS 302-1)	-	-	-
23.2(Internal Wiring, IS 302-1)	-	-	-
23.1(Internal Wiring, IS 302-1)	-	-	-
22.101(Construction)	-	-	-
22(Construction, IS 302-1)	-	-	-
21.2(Mechanical Strength, IS 302-1)	-	-	-
21.1(Mechanical Strength, IS 302-1)	-	-	-
20.116(Stability & Mechanical Hazards)	-	-	-
20.115(Stability & Mechanical Hazards)	-	-	-
20.114(Stability & Mechanical Hazards)	-	-	-
20.113(Stability & Mechanical Hazards)	-	-	-
20.112(Stability & Mechanical Hazards)	-	-	-
20.111(Stability & Mechanical Hazards)	-	-	-
20.110(Stability & Mechanical Hazards)	-	-	-
20.109(Stability & Mechanical Hazards)	-	-	-
20.108(Slicing machines shall incorporate a guard surrounding the circular knife, its open sector being no larger than required for using the appliance Knife guards shall be non-detachable unless the motor cannot be switched on after their removal. It shall not be possible to operate interlocks by means of test probe B of IS 1401. Appliance shall satisfy requirements as per Cl. 20.108 of IS 302-2-14-2009)	-	-	-
20.107(Stability & Mechanical Hazards)	-	-	-
20.106(Stability & Mechanical Hazards)	-	-	-
20.105(Stability & Mechanical Hazards)	-	-	-
20.104(Stability & Mechanical Hazards)	-	-	-
20.103(Stability & Mechanical Hazards)	-	-	-
20.102(Stability & Mechanical Hazards)	-	-	-
20.101(Stability & Mechanical Hazards)	-	-	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	-	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	-	-
19.1(Abnormal Operation, IS 302-1)	-	-	-
19.9(Abnormal Operation, IS 302-1)	-	-	-
19.8(Abnormal Operation, IS 302-1)	-	-	-
19.7(Abnormal Operation, IS 302-1)	-	-	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	-	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	-	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	-	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	-	-
15(Moisture Resistance, IS 302-1)	-	-	-
15.2(Moisture Resistance, IS 302-1)	-	-	-
15.1(Moisture Resistance, IS 302-1)	-	-	-
14(Transient Over Voltages, IS 302-1)	-	-	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	-	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	-	-
11(Heating, IS 302-1)	-	-	-
10(Power Input and Current, IS 302-1)	-	-	-
8(Protection Against Electric Shock, IS 302-1)	-	-	-
7.15(Marking- IS 302-1)	-	-	-
7.14(Marking- IS 302-1)	-	-	-
7.13(Marking- IS 302-1)	-	-	-
7.12(Marking- IS 302-1)	-	-	-
7.11(Marking- IS 302-1)	-	-	-
7.8(Marking- IS 302-1)	-	-	-
7.7(Marking- IS 302-1)	-	-	-
7.6(Marking- IS 302-1)	-	-	-
7.4(Marking- IS 302-1)	-	-	-
7.3(Marking- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
6(Classification- IS 302-1)	-	-	-
11(Heating, IS 302-1)	-	-	-
11(Heating, IS 302-1)	-	-	-
11(Heating, IS 302-1)	-	-	-
11(Heating, IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
6(Classification- IS 302-1)	-	-	-
22.102(Construction)	-	-	-
19.102(Abnormal Operation)	-	-	-
19.101(Abnormal Operation)	-	-	-
7.101(Marking)	-	-	-

26 Sep, 2028

-
Included w.e.f. 08.04.2026 Exclusion 32 (Radiation, Toxicity and similar Hazard IS 302-1) "19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.4 (Surge immunity test) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Harmonics) "

IS 2202 : Part 1 (2023)

WOODEN FLUSH DOOR SHUTTERS SOLID CORE TYPE SPECIFICATION PART 1 PLYWOOD FACE PANELS Seventh Revision

All Grade / Type / Size / Designation

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.1(Workmanship & Finish)	-	0	-
9.2(Workmanship & Finish)	-	500	-
9.3(Workmanship & Finish)	-	0	-
11.1(Dimensions - Height)	-	500	-
11.1(Dimensions - Width)	-	500	-
11.1(Dimensions - Thickness)	-	500	-
11.1(Dimensions - Variation in thickness)	-	0	-
11.1(Dimensions - Squareness)	-	500	-
11.12(End immersion test)	-	1000	-
11.13(Knife Test)	-	1000	-
11.14(Glue Adhesion Test)	-	1000	-
4(GRADE)	-	0	-
4(TYPE)	-	0	-
5(SIZES)	-	0	-
7.1.1(CONSTRUCTION-Blockboard Core)	-	0	-
7.1.1(CONSTRUCTION-Blockboard Core)	-	0	-
7.1.2(CONSTRUCTION-Blockboard Core)	-	0	-
7.3.2(CONSTRUCTION-Stiles and Rails)	-	0	-
7.3.2(a)(CONSTRUCTION-Stiles and Rails-Joints)	-	0	-
7.3.2(b)(CONSTRUCTION-Stiles and Rails-Joints)	-	0	-
7.3.2(c)(CONSTRUCTION-Stiles and Rails-Joints)	-	0	-
7.3.3(CONSTRUCTION-Stiles and Rails)	-	0	-
9.1(WORKMANSHIP AND FINISH)	-	0	-
9.2(WORKMANSHIP AND FINISH)	-	0	-
9.3(WORKMANSHIP AND FINISH)	-	0	-
11.1(Dimensions and Squareness Test)	-	500	-
11.1(Dimensions and Squareness Test)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.2(General Flatness Test)	-	500	-
11.2(General Flatness Test)	-	0	-
11.2(General Flatness Test)	-	0	-
11.3(Local Planeness Test)	-	500	-
11.4(Impact Indentation Test)	-	500	-
11.4(Impact Indentation Test)	-	0	-
11.5(Flexure Test)	-	1000	-
11.5(Flexure Test)	-	1000	-
11.6(Edge Loading Test)	-	1000	-
11.6(Edge Loading Test)	-	0	-
11.6(Edge Loading Test)	-	0	-
11.6(Edge Loading Test)	-	0	-
11.7.1(Shock Resistance Test)	-	1000	-
11.7.2(Shock Resistance Test)	-	0	-
11.8(Buckling Test)	-	1000	-
11.8(Buckling Test)	-	0	-
11.8(Buckling Test)	-	0	-
11.9.2(Slamming Test)	-	1000	-
11.9.3(Slamming Test)	-	0	-
11.10(Misuse Test)	-	500	-
11.11(Varying Humidity Test)	-	1000	-
11.11(Varying Humidity Test)	-	0	-
11.12(End Immersion Test)	-	500	-
11.13(Knife Test)	-	500	-
11.14(Glue Adhesion Test)	-	500	-
11.15(Screw Withdrawal Resistance Test)	-	1000	-
11.15(Screw Withdrawal Resistance Test)	-	0	-
Clause 4.2(grades specified)	-	0	-
Clause 5(SIZES)	-	0	-
Clause 6.1.1(species of timber)	-	0	-
Clause 6.1.2(list of species)	-	0	-
Clause 6.1.3(moisture content)	-	0	-
Clause 6.2.1(Plywood)	-	0	-
Clause 6.2.2(Decorative plywood)	-	0	-
Clause 6.3(Cross-Bands)	-	0	-
Clause 6.4.1(Commercial Face Veneers)	-	0	-
Clause 6.4.2(Decorative Face Veneers)	-	0	-
Clause 6.6.1(Adhesives)	-	0	-
Clause 6.7(Particle Board)	-	0	-
Clause 6.8(Medium density fibre board)	-	0	-
Clause 6.9(Alternative Materials)	-	0	-
Clause 7.1(Blockboard Core)	-	0	-
Clause 7.2(Particle Board or Medium Density Fibre)	-	0	-
Clause 7.3(Stiles and Rails)	-	0	-
Clause 7.4(Levelling)	-	0	-
Clause 7.5(Face Panel)	-	0	-
Clause 7.6(Lipping)	-	0	-
Clause 7.7(Rebating)	-	0	-
Clause 7.8(Opening for Glazing)	-	0	-
Clause 7.9(Venetian)	-	0	-
Clause 8.1(Locks)	-	0	-
Clause 9(WORKMANSHIP AND FINISH)	-	0	-
Clause 10.1(Classification of Tests)	-	0	-
Clause 11.1(Dimensions and Squareness Test)	-	0	-
Clause 11.2(General Flatness Test)	-	0	-
Clause 11.3(Local Planeness Test)	-	0	-
Clause 11.4(Impact Indentation Test)	-	0	-
Clause 11.5(Flexure Test)	-	0	-
Clause 11.6(Edge Loading Test)	-	0	-
Clause 11.7(Shock Resistance Test)	-	0	-
Clause 11.8(Buckling Resistance Test)	-	0	-
Clause 11.9(Slamming Test)	-	0	-
Clause 11.10(Misuse Test)	-	0	-
Clause 11.11(Varying Humidity Test)	-	0	-
Clause 11.12(End Immersion Test)	-	0	-
Clause 11.13(Knife Test)	-	0	-
Clause 11.14(Glue Adhesion Test)	-	0	-
Clause 11.15(Screw Withdrawal Resistance Test)	-	0	-
Clause 12(SAMPLING AND CRITERIA FOR CONFORMITY)	-	0	-
Clause 13(ADDITIONAL REQUIREMENTS FOR ECO MARK)	-	0	-
Clause 14(Marking)	-	0	-
4(Grade, Type and Construction)	-	0	-
5(Sizes and Thickness)	-	0	-
6.1(Timber)	-	0	-
6.2(Plywood for flush door shutter)	-	0	-
6.3(Cross-Bands )	-	0	-
6.4.1(Commercial Face Veneers)	-	0	-
6.4.2(Decorative face veneers)	-	0	-
6.6(Adhesives)	-	0	-
6.7(Particle Board)	-	0	-
6.8(Medium Density Fibre)	-	0	-
6.9(Alternative Materials)	-	0	-
7(Construction)	-	0	-
8.1(Locks)	-	0	-
8.2(Other Fittings)	-	0	-
9(Workmanship and Finish)	-	0	-
10(Tests)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.2(General Flatness Test)	-	0	-
11.3(Local Planeness Test)	-	0	-
11.4(Impact Indentation Test)	-	0	-
11.5(Flexure Test)	-	0	-
11.6(Edge Loading Test)	-	0	-
11.7(Shock Resistance Test)	-	0	-
11.8(Buckling Resistance Test)	-	0	-
11.9(Slamming Test)	-	0	-
11.1(Misuse Test)	-	0	-
11.11(Varying Humidity Test)	-	0	-
11.12(End Immersion Test)	-	0	-
11.13(Knife Test)	-	0	-
11.14(Glue Adhesion Test)	-	0	-
11.15(Screw Withdrawal Resistance Test)	-	0	-
14(Marking )	-	0	-
Cl-13(ADDITIONAL REQUIREMENTS FOR ECO MARK)	-	0	-

26 Sep, 2028

-
Included w.e.f 17.03.2026

IS 710 (2024)

MARINE PLYWOOD - SPECIFICATION (Third Revision)

All types & Grades

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Timber)	-	0	-
Cl-4.2(Adhesive)	-	500	-
Cl-5.1(Veneers)	-	0	-
Cl-5.2.1(Glueing)	-	0	-
Cl -5.2.2(Thickness of Veneers)	-	500	-
Cl - 5.2.3.1(Joint in Veneers)	-	0	-
Cl - 5.2.3.2(Edge joints)	-	0	-
Cl - 5.2.3.3(End joints)	-	0	-
Cl - 5.2.3.4(Scarf joints)	-	0	-
Cl - 5.2.4(Grain Direction)	-	0	-
Cl-5.3(Treatment)	-	0	-
Cl-5.4(Moisture Content)	-	1000	-
Cl-6.1(Dimensions (length))	-	500	-
Cl-6.2(Thickness)	-	500	-
Cl-6.3(Squareness)	-	500	-
Cl-7.1, 7.2, 7.3, 7.4, 7.5 & 7.6(Workmanship and finish)	-	500	-
Cl-9.3(Moisture Content)	-	1000	-
Cl-9.4.2(Glue Adhesion in Dry State- Adhesion of Plies)	-	1000	-
Cl-9.4.1(Glue Adhesion in Dry State- Glue Shear Strength -Average)	-	1000	-
Cl-9.5.1.1(Glue Adhesion in Water Resistance - Glue Shear Strength -Average)	-	1000	-
Cl-9.5.1.2(Water Resistance Test-Adhesion of plies)	-	1000	-
Cl-9.5.2(Water Resistance Test)	-	1000	-
Cl-9.6(Tensile Strength-Along the grain)	-	1000	-
Cl-9.7(Mycological Test -Adhesion)	-	1000	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1000	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1000	-
Cl-9.9, Table-3 (i) a((Modulus of Elasticity: Across the Face Grain: Average) Wet Bending)	-	1000	-
Cl-9.9, Table-3 (i) b((Modulus of Elasticity: Across the Face Grain: Minimum Individual) Wet Bending)	-	1000	-
Cl-9.4.2(Adhesion of Plies)	-	10000	-
5.1.1(Defects in veneers)	-	5000	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	1000	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	1000	-
Cl-9.9, Table-3 (ii) a((Modulus of Rupture: Across the Face Grain: Average) Wet Bending)	-	1000	-
Cl-9.9, Table-3 (ii) b((Modulus of Rupture: Across the Face Grain: Minimum Individual) Wet Bending)	-	1000	-
Cl-6.1(Dimensions (width))	-	500	-
Cl-8.3(Edge Straightness)	-	500	-
Cl-9.4.1(Glue Adhesion in Dry State- Glue Shear Strength –Minimum Individual)	-	1000	-
Cl-9.5.1.1(Glue Adhesion in Water Resistance - Glue Shear Strength –Minimum Individual)	-	1000	-
Cl-9.6(Tensile Strength-Across the grain)	-	1000	-
Cl-9.7(Glue Adhesion in Mycological test - Glue Shear Strength –Minimum Individual)	-	1000	-
Cl-9.7(Glue Adhesion in Mycological test - Glue Shear Strength -Average)	-	1000	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	1000	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	1000	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	1000	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	1000	-
Cl-11.1(Marking)	-	0	-
Cl-11.3(Marking)	-	0	-
Cl-9.10(Retention of Preservative)	-	1000	-
Cl-9.11(Formaldehyde Content Test)	-	1500	-
Cl-9.12(Steady-State Formaldehyde Emission Test)	-	15000	-

26 Sep, 2028

-
Included w.e.f 24.02.2026

IS 4990 (2024)

PLYWOOD FOR CONCRETE SHUTTERING WORKS SPECIFICATION (Fourth Revision)

All Grade & Type

23000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Timber)	-	0	-
Cl-5.2(Adhesives for Bonding of Veneers)	-	0	-
Cl-6.1(Manufacture)	-	0	-
Cl-6.2(Manufacture ( Thickness of veneers))	-	500	-
Cl-6.3(Manufacture ( Physical and mechanical properties of veneers))	-	0	-
Cl-6.4, 6.7(Manufacture (Plywood for concrete shuttering))	-	0	-
Cl-6.5(Manufacture (Scarf joints))	-	500	-
Cl-6.6(Manufacture ( Preservative treatment))	-	0	-
Cl-7.1(Dimensions -length)	-	500	-
Cl-7.2(Thickness)	-	500	-
Cl-7.3(Squareness)	-	500	-
Cl-8.1, 8.2(Workmanship and finish)	-	500	-
Cl-10.3(Moisture Content)	-	600	-
Cl-10.4.1(Glue Adhesion in Dry State - Glue Shear Strength-WOOD FAILURE, Average)	-	500	-
Cl-10.4.2(Glue Adhesion in Dry State - Adhesion of Plies)	-	500	-
Cl-10.5, 10.5.1(Resistance to water test- glue shear strength- WOOD Failure, Average)	-	1000	-
Cl-10.5.1.1(Water Resistance Test-Glue shear strength)	-	1000	-
Cl-10.5.1.2(Water Resistance Test-Adhesion of plies)	-	1000	-
Cl-10.5.2(Water Resistance Test (Alternate method))	-	1500	-
Cl-10.6(Water resistance test (Concrete shuttering Plywood))	-	1000	-
Cl-10.7.1, Table-2(Mycological Test- Glue shear strengt)	-	1000	-
Cl-10.7.2(Mycological Test- Adhesion of plies)	-	1000	-
Cl-10.8(Tensile Strength)	-	1000	-
Cl-10.9, Table-3 (i)(Along (parallel to the grain direction of the face veneer))	-	1000	-
Cl-10.9, Table-3 (ii)(Across (perpendicular to the grain direction of the face veneer))	-	1000	-
Cl-10.10, Table-4 (i) a((Modulus of Elasticity: Across the Face Grain: Average) Wet Bending)	-	800	-
Cl-10.10, Table-4 (i) b((Modulus of Rupture: Across the Face Grain: Minimum Individual) Wet Bending)	-	800	-
Cl-10.10, Table-4 (ii) a(Wet Bending Strength:- Modulus of Rupture: Across the Face Grain: Average))	-	800	-
Cl-10.10, Table-4, (ii) b(Wet Bending Strength; (Modulus of Rupture: Along the Face Grain: Minimum Individual))	-	800	-
Cl-10.4.1, 10.5.1.1 and 10.7.1, Table-2(Average Wood Failure)	-	0	-
Cl-10.4.1, 10.5.1.1 and 10.7.1, Table-2(Average Failure Load, N -Dry State)	-	0	-
Cl-10.4.1, 10.5.1.1 and 10.7.1, Table-2(Average Failure Load, N- Resistance to Water)	-	0	-
Cl-10.4.1, 10.5.1.1 and 10.7.1, Table-2(Average Failure Load, N - Resistance to Micro-Organisms)	-	0	-
Cl-10.8 (a)(Tensile strength)	-	1000	-
Cl-10.8 (b)(Tensile strength)	-	1000	-
Cl-10.8 (c)(Tensile strengths in both directions)	-	1000	-
Cl-7.1(Dimensions (width))	-	200	-
Cl-7.3(Edge Straightness)	-	200	-
Cl-10.12(Formaldehyde Content Test)	-	1500	-
Cl-10.13(Steady-State Formaldehyde Emission Test)	-	1000	-
Cl-10.11(Retention of Preservative)	-	1000	-

26 Sep, 2028

-
Included w.e.f 24.02.2026

IS 5509 (2021)

Fire Retardant Plywood - Specification ( Third Revision )

All type & Grade

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.3 (Table 1)(b) 6 mm and above)	-	500	-
4.1(Flame retardant chemicals)	-	500	-
4.2(Flame retardant and preservative treatment)	-	500	-
4.3(Treatment)	-	400	-
6.1.1(Treatment of Plywood by Pressure Impregnation after Manufacture)	-	400	-
6.1.2(Soaking Treatment)	-	400	-
6.2(Choice of Treatment)	-	400	-
7(CONDITIONING AFTER TREATMENT)	-	400	-
8.1(Dimensions)	-	1000	-
8.2(Thickness)	-	500	-
8.3, Taable-1 (i)(Tolerance- Length)	-	500	-
9(WORKMANSHIP AND FINISH)	-	500	-
10(SAMPLING AND CRITERIA FOR CONFORMITY)	-	200	-
11 (a)(For flammability)	-	1200	-
11 (b)(For flame penetration)	-	1200	-
11 (c)(For rate of burning)	-	1200	-
12.1 Table - 2 (i)(Moisture content, percent, Max)	-	500	-
12.1 Table - 2 (ii)(Flammability (see Note 1), minutes, Min)	-	1200	-
12.1 Table - 2 (iii)(Flame penetration (see Note 2), minutes, Min)	-	1200	-
12.1 Table - 2 (iv)(Rate of burning (see Note 3), minutes, Min)	-	1200	-
12.2(Other Tests)	-	500	-
14(Marking)	-	500	-
Cl-13(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	300	-
Cl-8.3, Table-1 (ii)(Tolerances-Width)	-	400	-
Cl-8.3, Table-1 (iii)(Tolerances- Thickness)	-	400	-
Cl-8.3, Table-1 (iv)(Edge straightness)	-	400	-
Cl-8.3, Table-1 (v)(Squareness,)	-	400	-
5(PREPARATION FOR TREATMENT)	-	400	-

26 Sep, 2028

-
Included w.e.f 17.03.2026

IS 1328 (2025)

Veneered Decorative Plywood - Specification ( Fourth Revision )

All type & Grade

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4.1(Grades)	-	500	-
Cl 4.2(Type)	-	500	-
Cl 4.3(Formaldehyde Class)	-	500	-
Cl 5.2(Adhesive)	-	500	-
Cl 7.1(Surface Requirements- For Type 1)	-	200	-
Cl 7.2(Surface Requirements- For Type 2)	-	200	-
Cl 7.3(Surface Requirements- For Type 3)	-	200	-
Cl 7.4(Surface Requirements- For Type 4)	-	200	-
Cl 8.1(Dimensions (Length and Width))	-	500	-
Cl 8.2(Dimensions (Thickness))	-	500	-
Cl 8.3(Squareness and Edge Straightness as Per Annex B)	-	500	-
Cl 8.4- Table 1(Tolerances)	-	200	-
Cl 11.3(Moisture Content)	-	500	-
Cl 11.4.1(a)(Water Resistance Test( For MR Grade))	-	1000	-
Cl 11.4.1(b)(Water Resistance Test( For BWR Grade))	-	1000	-
Cl 11.4.1(c)(Water Resistance Test( For BWP Grade))	-	1000	-
Cl 12(Marking)	-	200	-
Cl 11.5(Formaldehyde Content Test)	-	1000	-
Cl 11.6(Steady - State Formaldehyde Emission Test ( Optional Test))	-	1000	-

26 Sep, 2028

-
Included w.e.f 17.02.2026

IS 848 (2025)

Synthetic Resin Adhesives for Plywood (Phenolic, Aminoplastic and Bio-Materials Based) - Specification ( Third Revision )

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 4 Table 1(TYPES)	-	500	-
As per Clause 6.6(SETTING TIMES AND CONDITIONS)	-	1000	-
As per Clause 7.3.2 Table 1(i)(Cyclic Test For BWP Type)	-	2000	-
As per Clause 7.3.2 Table 1(ii)(Cyclic Test For BWR Type)	-	2000	-
As per Clause 7.3.2 Table 1(iii)(Cyclic Test For MR Type)	-	2000	-
As per Clause 7.4(Acidity And Alkalinity (pH))	-	1000	-
As per Clause 9(Marking)	-	500	-

26 Sep, 2028

-
Included w.e.f 17.02.2026

IS 1542 (1992)

Sand for plaster - Secification (Second Revision)

All types and grade

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(General)	-	500	-
4.2(Deterious Materials)	-	6000	-
4.3(Limits of Deleterious Materials)	-	1000	-
5(Grading of Sand)	-	1000	-
7(ADDITIONAL INFORMATION TO BE FURNISHED BY THE SUPPLIER)	-	0	-
4.1(General)	-	0	-
4.2(Deterious Materials)	-	0	-
4.3(Limits of Deleterious Materials)	-	0	-
5(Grading of Sand)	-	0	-
7(ADDITIONAL INFORMATION TO BE FURNISHED BY THE SUPPLIER)	-	0	-

26 Sep, 2028

-
included w.e.f 01.04.2026

IS 428 (2013)

Washable distemper - Specification (Third Revision)

All types and grade

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. ix)(Accelerated storage stability)	-	2000	-
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. vii)(Recoating Properties)	-	1000	-
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. vi)(Residue on sieve, Type 2)	-	1000	-
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. vi)(Residue on sieve, Type 1)	-	1000	-
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. iii)(Finish)	-	500	-
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. ii)(Consistency )	-	1000	-
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. i) b)(Drying Time a) Hard Dry, Type 2)	-	1500	-
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. i) b)(Drying Time a) Hard Dry, Type 1)	-	1500	-
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. i) a)(Drying Time a) Surface Dry, Type 2)	-	1500	-
Cl.6.6(Keeping Proterties)	-	8000	-
Cl.6.3(Application)	-	500	-
Cl.6.2(Thining)	-	500	-
Cl. 6.9.2.2( Chromium VI and its compund (Requirement for Eco-Mark))	-	1500	-
Cl. 6.9.2.2(Cadmium (Requirement for Eco-Mark))	-	1500	-
Cl. 6.9.2.2(Lead (Requirement for Eco-Mark))	-	1500	-
Cl. 6.9.2.1(Volatile organic compounds (Requirement for Eco-Mark))	-	2000	-
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. viii)(Resistance to alkali)	-	1000	-
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. v)(Fastness to light)	-	1000	-
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. iv)(Colour)	-	1000	-
Cl.6.5(Lead Restriction)	-	1500	-
Cl.6.1(Foam and condition)	-	500	-

26 Sep, 2028

-
Included w.e.f 17.02.2026

IS 3854 (2023)

Switches for Domestic and Similar Purposes - Specification (Third Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	500	-
Cl-5(General notes on tests)	-	500	-
Cl-6(Rating)	-	500	-
Cl-7(Classification)	-	500	-
Cl-8(Marking)	-	500	-
Cl-9(Checking of dimensions)	-	500	-
Cl-10.1, 10.2(Prevention of Access to Live Parts)	-	500	-
Cl-10.3(Requirements for Accessible Metal Parts)	-	500	-
Cl-10.4(Requirements for Insulation of the Mechanism)	-	500	-
Cl. 10.5(Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-	500	-
Cl-10.6(Requirements for Switches Operated Indirectly)	-	500	-
Cl-10.7(Requirements for Switches with Replaceable Pull Cord)	-	500	-
Cl-11(Provision for earthing)	-	1000	-
Cl-12(Terminals)	-	1000	-
Cl-13(Constructional requirements)	-	1500	-
Cl-14(Mechanism)	-	1000	-
Cl-15.1(Resistance to Ageing)	-	2000	-
Cl-15.2(Protection Provided by Enclosures of Switches)	-	1000	-
Cl-15.3(Resistance to Humidity)	-	1500	-
Cl-16.1(General)	-	500	-
Cl-16.2(Test for Measuring the Insulation Resistance)	-	1000	-
Cl-16.3(Electric Strength Test)	-	1000	-
Cl-17(Temperature rise)	-	1500	-
Cl-18(Making and breaking capacity)	-	1000	-
Cl-19(Normal operation)	-	1000	-
Cl-20(Mechanical strength)	-	1000	-
Cl-21(Resistance to heat)	-	1000	-
Cl-22(Screws, current carrying parts and connections)	-	1000	-
Cl-23(Creepage distances, clearances and distance through sealing compound)	-	500	-
Cl-24.1(Resistance to abnormal heat and fire)	-	1000	-
Cl-24.2(Resistance to tracking)	-	1000	-
Cl-25(Resistance to rusting)	-	1000	-
19.1(Test for Switches Intended for Inductive Loads)	-	1000	-
19.2(Test for Switches Intended for Externally Ballasted Lamp Loads)	-	1000	-
19.3(Test for Switches Intended for Self-ballasted Lamp Loads)	-	1000	-
13.5(Attachment of knobs)	-	1500	-
12.3.11(Table 11)(Test Current for the Verification of Electrical and Thermal Stresses in Normal Use of Screwless Terminals)	-	1000	-
12.3.12(Table 13)(Deflection Test Forces)	-	1000	-
Cl-4(General Requirements)	-	500	-
Cl-5(General notes on tests)	-	500	-
Cl-6(Rating)	-	500	-
Cl-7(Classification)	-	500	-
Cl-8(Marking)	-	500	-
Cl-9(Checking of dimensions)	-	500	-
Cl-10.1, 10.2(Prevention of Access to Live Parts)	-	500	-
Cl-10.3(Requirements for Accessible Metal Parts)	-	500	-
Cl-10.4(Requirements for Insulation of the Mechanism)	-	500	-
Cl. 10.5(Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-	500	-
Cl-10.6(Requirements for Switches Operated Indirectly)	-	1000	-
Cl-10.7(Requirements for Switches with Replaceable Pull Cord)	-	500	-
Cl-11(Provision for earthing)	-	1000	-
Cl-12(Terminals)	-	1000	-
Cl-13(Constructional requirements)	-	1000	-
Cl-14(Mechanism)	-	1000	-
Cl-15.1(Resistance to Ageing)	-	1000	-
Cl-15.2(Protection Provided by Enclosures of Switches)	-	1000	-
Cl-15.3(Resistance to Humidity)	-	1000	-
Cl-16.1(General)	-	500	-
Cl-16.2(Test for Measuring the Insulation Resistance)	-	500	-
Cl-16.3(Electric Strength Test)	-	1000	-
Cl-17(Temperature rise)	-	1000	-
Cl-18(Making and breaking capacity)	-	1000	-
Cl-19(Normal operation)	-	1000	-
Cl-20(Mechanical strength)	-	1000	-
Cl-21(Resistance to heat)	-	1000	-
Cl-22(Screws, current carrying parts and connections)	-	1000	-
Cl-23(Creepage distances, clearances and distance through sealing compound)	-	500	-
Cl-24.1(Resistance to abnormal heat and fire)	-	1000	-
Cl-24.2(Resistance to tracking)	-	1000	-
Cl-25(Resistance to rusting)	-	1000	-
19.1(Test for Switches Intended for Inductive Loads)	-	1000	-
19.2(Test for Switches Intended for Externally Ballasted Lamp Loads)	-	1000	-
19.3(Test for Switches Intended for Self-ballasted Lamp Loads)	-	1000	-
13.5(Attachment of knobs)	-	500	-
12.3.11(Table 11)(Test Current for the Verification of Electrical and Thermal Stresses in Normal Use of Screwless Terminals)	-	500	-
12.3.12(Table 13)(Deflection Test Forces)	-	500	-
Cl-4(General Requirements)	-	500	-
Cl-5(General notes on tests)	-	500	-
Cl-6(Rating)	-	500	-
Cl-7(Classification)	-	500	-
Cl-8(Marking)	-	500	-
Cl-9(Checking of dimensions)	-	500	-
Cl-10.1, 10.2(Prevention of Access to Live Parts)	-	500	-
Cl-10.3(Requirements for Accessible Metal Parts)	-	500	-
Cl-10.4(Requirements for Insulation of the Mechanism)	-	500	-
Cl. 10.5(Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-	500	-
Cl-10.6(Requirements for Switches Operated Indirectly)	-	1000	-
Cl-10.7(Requirements for Switches with Replaceable Pull Cord)	-	1000	-
Cl-11(Provision for earthing)	-	1000	-
Cl-12(Terminals)	-	1000	-
Cl-13(Constructional requirements)	-	1000	-
Cl-14(Mechanism)	-	1500	-
Cl-15.1(Resistance to Ageing)	-	1000	-
Cl-15.2(Protection Provided by Enclosures of Switches)	-	1000	-
Cl-15.3(Resistance to Humidity)	-	1000	-
Cl-16.1(General)	-	500	-
Cl-16.2(Test for Measuring the Insulation Resistance)	-	500	-
Cl-16.3(Electric Strength Test)	-	1000	-
Cl-17(Temperature rise)	-	1000	-
Cl-18(Making and breaking capacity)	-	1000	-
Cl-19(Normal operation)	-	1000	-
Cl-20(Mechanical strength)	-	1000	-
Cl-21(Resistance to heat)	-	1000	-
Cl-22(Screws, current carrying parts and connections)	-	1000	-
Cl-23(Creepage distances, clearances and distance through sealing compound)	-	500	-
Cl-24.1(Resistance to abnormal heat and fire)	-	1000	-
Cl-24.2(Resistance to tracking)	-	1000	-
Cl-25(Resistance to rusting)	-	1000	-
19.1(Test for Switches Intended for Inductive Loads)	-	1000	-
19.2(Test for Switches Intended for Externally Ballasted Lamp Loads)	-	1000	-
19.3(Test for Switches Intended for Self-ballasted Lamp Loads)	-	1000	-
13.5(Attachment of knobs)	-	1000	-
12.3.11(Table 11)(Test Current for the Verification of Electrical and Thermal Stresses in Normal Use of Screwless Terminals)	-	1000	-
12.3.12(Table 13)(Deflection Test Forces)	-	1000	-
Cl-4(General Requirements)	-	500	-
Cl-5(General notes on tests)	-	500	-
Cl-6(Rating)	-	500	-
Cl-7(Classification)	-	500	-
Cl-8(Marking)	-	500	-
Cl-9(Checking of dimensions)	-	500	-
Cl-10.1, 10.2(Prevention of Access to Live Parts)	-	500	-
Cl-10.3(Requirements for Accessible Metal Parts)	-	500	-
Cl-10.4(Requirements for Insulation of the Mechanism)	-	500	-
Cl. 10.5(Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-	500	-
Cl-10.6(Requirements for Switches Operated Indirectly)	-	1000	-
Cl-10.7(Requirements for Switches with Replaceable Pull Cord)	-	1000	-
Cl-11(Provision for earthing)	-	1000	-
Cl-12(Terminals)	-	1000	-
Cl-13(Constructional requirements)	-	1500	-
Cl-14(Mechanism)	-	1500	-
Cl-15.1(Resistance to Ageing)	-	1000	-
Cl-15.2(Protection Provided by Enclosures of Switches)	-	1000	-
Cl-15.3(Resistance to Humidity)	-	1000	-
Cl-16.1(General)	-	500	-
Cl-16.2(Test for Measuring the Insulation Resistance)	-	1000	-
Cl-16.3(Electric Strength Test)	-	1000	-
Cl-17(Temperature rise)	-	1000	-
Cl-18(Making and breaking capacity)	-	1000	-
Cl-19(Normal operation)	-	1000	-
Cl-20(Mechanical strength)	-	1000	-
Cl-21(Resistance to heat)	-	1000	-
Cl-22(Screws, current carrying parts and connections)	-	1000	-
Cl-23(Creepage distances, clearances and distance through sealing compound)	-	500	-
Cl-24.1(Resistance to abnormal heat and fire)	-	1000	-
Cl-24.2(Resistance to tracking)	-	1000	-
Cl-25(Resistance to rusting)	-	1000	-
19.1(Test for Switches Intended for Inductive Loads)	-	1000	-
19.2(Test for Switches Intended for Externally Ballasted Lamp Loads)	-	1000	-
19.3(Test for Switches Intended for Self-ballasted Lamp Loads)	-	1000	-
13.5(Attachment of knobs)	-	1000	-
12.3.11(Table 11)(Test Current for the Verification of Electrical and Thermal Stresses in Normal Use of Screwless Terminals)	-	1000	-
12.3.12(Table 13)(Deflection Test Forces)	-	1000	-
Cl-4(General Requirements)	-	500	-
Cl-5(General notes on tests)	-	500	-
Cl-6(Rating)	-	500	-
Cl-7(Classification)	-	500	-
Cl-8(Marking)	-	500	-
Cl-9(Checking of dimensions)	-	500	-
Cl-10.1, 10.2(Prevention of Access to Live Parts)	-	1000	-
Cl-10.3(Requirements for Accessible Metal Parts)	-	1000	-
Cl-10.4(Requirements for Insulation of the Mechanism)	-	1000	-
Cl. 10.5(Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-	1000	-
Cl-10.6(Requirements for Switches Operated Indirectly)	-	1000	-
Cl-10.7(Requirements for Switches with Replaceable Pull Cord)	-	1000	-
Cl-11(Provision for earthing)	-	1000	-
Cl-12(Terminals)	-	1000	-
Cl-13(Constructional requirements)	-	1500	-
Cl-14(Mechanism)	-	1500	-
Cl-15.1(Resistance to Ageing)	-	1000	-
Cl-15.2(Protection Provided by Enclosures of Switches)	-	1000	-
Cl-15.3(Resistance to Humidity)	-	1500	-
Cl-16.1(General)	-	500	-
Cl-16.2(Test for Measuring the Insulation Resistance)	-	1000	-
Cl-16.3(Electric Strength Test)	-	1000	-
Cl-17(Temperature rise)	-	1000	-
Cl-18(Making and breaking capacity)	-	1000	-
Cl-19(Normal operation)	-	1000	-
Cl-20(Mechanical strength)	-	1500	-
Cl-21(Resistance to heat)	-	1000	-
Cl-22(Screws, current carrying parts and connections)	-	1500	-
Cl-23(Creepage distances, clearances and distance through sealing compound)	-	1000	-
Cl-24.1(Resistance to abnormal heat and fire)	-	1000	-
Cl-24.2(Resistance to tracking)	-	1000	-
Cl-25(Resistance to rusting)	-	1000	-
19.1(Test for Switches Intended for Inductive Loads)	-	1000	-
19.2(Test for Switches Intended for Externally Ballasted Lamp Loads)	-	1000	-
19.3(Test for Switches Intended for Self-ballasted Lamp Loads)	-	1000	-
13.5(Attachment of knobs)	-	1000	-
12.3.11(Table 11)(Test Current for the Verification of Electrical and Thermal Stresses in Normal Use of Screwless Terminals)	-	1000	-
12.3.12(Table 13)(Deflection Test Forces)	-	1000	-

26 Sep, 2028

-
Included w.e.f 24.02.2026

IS 12744 (2013)

Ready mixed paint, air drying, red oxide - Zinc phosphate, priming - Specification: Part 1 for domestic and decorative applications (First Revision)

All types and Grades

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5.3, 8.1 - Table 1 -xiii)(Keeping Properties)	-	10000	-
Cl.5.3, 8.1 - Table 1 -xii)(Mass)	-	1000	-
Cl.5.3, 8.1 - Table 1 -ix) b)(Flexibility and adhesion b) Bent Test (with 6.25 mm dia mendrel in type 1 apparatus)	-	1500	-
Cl.5.3, 8.1 - Table 1 -ix) a)(Flexibility and adhesion a) Scratch Hardness (Load 800 g))	-	1500	-
Cl.5.3, 8.1 - Table 1 -v)(Wet Opacity)	-	2000	-
Cl.5.3, 8.1 - Table 1 -iii)(Finish)	-	500	-
Cl.5.3, 8.1 - Table 1 -ii)(Consistency )	-	500	-
Cl.5.3, 8.1 - Table 1 -i)(Drying time hard dry)	-	1000	-
Cl.5.3, 8.1 - Table 1 -xi)(Flash Point)	-	1000	-
Cl.5.3, 8.1 - Table 1 -x) b)(Resistance to humidity under conditions of condensation a) Resistance to Salt Spray (for 96 Hours))	-	5000	-
Cl.5.3, 8.1 - Table 1 -x) a)(Resistance to humidity under conditions of condensation a) Resistance to humidity (for 7 days))	-	4000	-
Cl.5.3, 8.1 - Table 1 -viii)(Red Oxide (as Fe2O3) )	-	1500	-
Cl.5.3, 8.1 - Table 1 -vii)(Zinc Phosphate)	-	1500	-
Cl.5.3, 8.1 - Table 1 -vi)(Pigment Content)	-	2500	-
Cl.5.3, 8.1 - Table 1 -iv)(Colour in Natural Daylight)	-	1500	-
Cl.5.2(Lead Restriction)	-	1500	-

26 Sep, 2028

-
Included w.e.f 06.01.2026

IS 13759 (2017)

Polyurethane primer, zinc phosphate (Two - Pack) for exterior painting of railway coaches - Specification (First Revision)

All types and Grade

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause-4.3 & 7.1 Table-1 S.No-1 (v)(Colour)	-	1500	-
Clause-4.3 & 7.1 Table-1 S.No-1 (vii)(Volume solids percent, Min)	-	1500	-
Clause-4.3 & 7.1 Table-1 S.No-1 (ix)(Flash point, base and hardner each)	-	1000	-
Clause-4.3 & 7.1 Table-1 S.No-1 (x), a)(Resistance to humidity)	-	1000	-
Clause-4.3 & 7.1 Table-1 S.No-1 (x), b)(Resistance to salt spray expose for 500 h)	-	1000	-
Clause-4.2.1(Compounds of lead)	-	1500	-
Clause-4.3 & 7.1 Table-1 S.No-1 (i)(Consistency)	-	500	-
Clause-4.3 & 7.1 Table-1 S.No-1 (ii)(Viscosity by ford cup)	-	1000	-
Clause-4.3 & 7.1 Table-1 S.No-1 (iii)(Drying time, h, Max)	-	1500	-
Clause-4.3 & 7.1 Table-1 S.No-1 (iv)(Finish)	-	500	-
Clause-4.3 & 7.1 Table-1 S.No-1 (vi)(Dry film thickness, Min)	-	1000	-
Clause-4.3 & 7.1 Table-1 S.No-1 (viii), a)(Scratch hardness (Load 1 500 g))	-	1500	-
Clause-4.3 & 7.1 Table-1 S.No-1 (viii), b)(Bend test with 6.25 mm dia mandrel in type 1 apparatus )	-	1500	-
Clause-4.3 & 7.1 Table-2 S.No-1 (i)(Fineness of grind, Max)	-	1000	-
Clause-4.3 & 7.1 Table-2 S.No-1 (ii)(Pot life, h, Min)	-	1000	-
Clause-4.3 & 7.1 Table-2 S.No-1 (iii)(Mass, kg/10 litres, Min)	-	500	-
Clause-4.3 & 7.1 Table-2 S.No-1 (iv)(Keeping properties)	-	1000	-
Clause-5(Packing and Marking )	-	500	-
Clause-4.1 (Composition)	-	1500	-

26 Sep, 2028

-
Included w.e.f 14.10.2025

IS 7098 : Part 1 (2025)

Crosslinked Polyethylene Insulated Thermoplastic Sheathed Cables - Specification Part 1 For Working Voltages up to and Including 1 100 Volts (Second Revision)

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(Conductors -Material)	-	200	Complete testing charges=Rs.40000/- Rs.10000/- for Single core unarmoured cable; Rs.2000/- for each addl. Core; Rs.4000/- addl. For armoured cable; Rs.9000/- for addl. Tests for Cat-C1(FR); Rs.13000/- for addl. Tests for Cat-C2 (FR-LSH); Rs.20000/- for ad
Cl-5, Table-1 (i)(Tensile strength)	-	500	-
Cl-5, Table-1 (ii) (a)(Elongation at break- Ageing in air oven)	-	500	-
Cl-5, Table-1 (ii) (b)(Variation in tensile strength, from that without ageing)	-	300	-
Cl-5, Table-1 (ii) (c)(Variation in elongation at break, from that without ageing)	-	300	-
Cl-5, Table-1 (iii) (a)(Hot set- Treatment;)	-	1000	-
Cl-5, Table-1 (iii) (b)(Hot set- Elongation under load)	-	1000	-
Cl-5, Table-1 (iii) (c)(Hot set- Permanent elongation after cooling)	-	1000	-
Cl-5, Table-1 (iv)(Shrinkage)	-	500	-
Cl-5, Table-1 (v)(Water absorption (gravimetric))	-	3000	-
Cl-5, Table-1 (vi)(Volume resistivity)	-	500	-
Cl-6.1 (a)(Fillers and inner sheath- Vulcanized or unvulcanized rubber)	-	200	-
Cl-6.1 (B)(Fillers and inner sheath- Thermoplastic materials)	-	100	-
Cl-7(Armouring)	-	1000	-
Cl-8(Outer Sheath)	-	200	-
Cl-10.3(Tolerance on Thickness of Insulation)	-	250	-
Cl-11(Core Identification)	-	100	-
Cl-12(Laying up of Cores)	-	100	-
Cl-13(Inner Sheath (Common Covering))	-	100	-
Cl-14.1(Armouring- Application)	-	100	-
Cl-14.1.2(armour round wires/formed wires)	-	100	-
Cl-14.2(Type of Armour)	-	100	-
Cl-14.3(Dimensions)	-	100	-
Cl-14.4(Joints)	-	100	-
Cl-14.5(Resistance)	-	500	-
Cl-15.3(Thickness of Outer Sheath)	-	200	-
Cl-16.1 (i) (a)(Test on conductor: Annealing test (for copper);)	-	300	-
Cl-16.1 (i) (b)(Test on conductor: Tensile test (for aluminium);)	-	250	-
Cl-16.1 (i) (c)(Test on conductor: Wrapping test (for aluminium);)	-	250	-
Cl-16.1 (i) (d)(Test on conductor: Resistance test)	-	500	-
Cl-14.6 (a)(Physical tests on round wires/formed wires- Tensile strength)	-	200	-
Cl-14.6 (b)(Physical tests on round wires/formed wires- Elongation at break)	-	200	-
Cl-14.6 (c)(Physical tests on round wires/formed wires- Torsion test for round wires)	-	500	-
Cl-14.6 (d)(Physical tests on round wires/formed wires- Winding test for formed wires)	-	500	-
Cl-14.6 (e)(Physical tests on round wires/formed wires- Uniformity of zinc coating)	-	500	-
Cl-14.6 (f)(Physical tests on round wires/formed wires- Mass of zinc coating)	-	500	-
Cl-14.6 (g)(Physical tests on round wires/formed wires- Resistivity.)	-	500	-
Cl-10, 13, 15(Test for thickness of insulation and sheath)	-	250	-
Cl-16.1 (v) (1)(PVC Sheath- Tensile strength and elongation at break;)	-	250	-
Cl-16.1 (v) (2)(PVC Sheath- Ageing in air oven)	-	300	-
Cl-16.1 (v) (3)(PVC Sheath- Loss of mass in air oven)	-	300	-
Cl-16.1 (v) (6)(PVC Sheath- Heat shock test)	-	500	-
Cl-16.1 (v) (7)(PVC Sheath- Thermal stability)	-	500	-
Cl-8.3-Table 1A(PE Sheath- Carbon black content)	-	1000	-
Cl-8.3-Table 1A(PE Sheath- Tensile strength and elongation at break before and after ageing)	-	1000	-
Cl-8.3-Table 1A(PE Sheath- Hot deformation)	-	1000	-
Cl-8.3-Table 1A(PE Sheath- Shrinkage test.)	-	1000	-
Cl- Table 1B(LSHF Sheath- Tensile strength and elongation at break before and after ageing)	-	500	-
Cl- Table 1B(LSHF Sheath- Hot deformation)	-	500	-
Cl- Table 1B(LSHF Sheath- Shrinkage test)	-	500	-
Cl-17.2(High voltage test)	-	500	-
Cl-17.3(Flammability test)	-	500	-
Cl-17.4(Oxygen index test (FR, FR-LSH or LSHF Sheath))	-	10000	-
Cl-17.5(Flame retardance test on single cable)	-	5000	-
Cl-17.6(Flame retardance test on bunched cables (FR, FR-LSH or LSHF Sheathed Cables))	-	5000	-
Cl-17.7(Test for halogen acid evolution (FR-LSH or LSHF Outer Sheath))	-	5000	-
Cl-17.8(Smoke density test (FR-LSH or LSHF Sheath))	-	5000	-
Cl-17.9(Temperature index test; (FR, FR-LSH or LSHF Sheath))	-	5000	-
Cl-17.10(Test for pH and conductivity of LSHF Sheath)	-	500	-
Cl-17.11(Test for light transmission for LSHF Sheathed Cables)	-	500	-
Cl-16.4 (i)(Cold bend test for outer sheath)	-	500	-
Cl-16.4 (ii)(Cold impact test for outer sheath)	-	500	-
Cl-16.4 (iii)(Cold elongation test for LSHF sheath)	-	500	-
Cl-16.1 (v) (5)(PVC Sheath- Hot deformation test)	-	500	-
Cl- Table 1B(LSHF Sheath- Water absorption test)	-	2000	-
Cl-4(Conductors -Material)	-	200	-
Cl-5, Table-1 (i)(Tensile strength)	-	500	-
Cl-5, Table-1 (ii) (a)(Elongation at break- Ageing in air oven)	-	500	-
Cl-5, Table-1 (ii) (b)(Variation in tensile strength, from that without ageing)	-	500	-
Cl-5, Table-1 (ii) (c)(Variation in elongation at break, from that without ageing)	-	500	-
Cl-5, Table-1 (iii) (a)(Hot set- Treatment;)	-	500	-
Cl-5, Table-1 (iii) (b)(Hot set- Elongation under load)	-	500	-
Cl-5, Table-1 (iii) (c)(Hot set- Permanent elongation after cooling)	-	500	-
Cl-5, Table-1 (iv)(Shrinkage)	-	300	-
Cl-5, Table-1 (v)(Water absorption (gravimetric))	-	2000	-
Cl-5, Table-1 (vi)(Volume resistivity)	-	500	-
Cl-6.1 (a)(Fillers and inner sheath- Vulcanized or unvulcanized rubber)	-	200	-
Cl-6.1 (B)(Fillers and inner sheath- Thermoplastic materials)	-	200	-
Cl-7(Armouring)	-	500	-
Cl-8(Outer Sheath)	-	500	-
Cl-10.3(Tolerance on Thickness of Insulation)	-	200	-
Cl-11(Core Identification)	-	200	-
Cl-12(Laying up of Cores)	-	200	-
Cl-13(Inner Sheath (Common Covering))	-	200	-
Cl-14.1(Armouring- Application)	-	200	-
Cl-14.1.2(armour round wires/formed wires)	-	200	-
Cl-14.2(Type of Armour)	-	200	-
Cl-14.3(Dimensions)	-	200	-
Cl-14.4(Joints)	-	200	-
Cl-14.5(Resistance)	-	500	-
Cl-15.3(Thickness of Outer Sheath)	-	500	-
Cl-16.1 (i) (a)(Test on conductor: Annealing test (for copper);)	-	500	-
Cl-16.1 (i) (b)(Test on conductor: Tensile test (for aluminium);)	-	500	-
Cl-16.1 (i) (c)(Test on conductor: Wrapping test (for aluminium);)	-	500	-
Cl-16.1 (i) (d)(Test on conductor: Resistance test)	-	500	-
Cl-14.6 (a)(Physical tests on round wires/formed wires- Tensile strength)	-	500	-
Cl-14.6 (b)(Physical tests on round wires/formed wires- Elongation at break)	-	500	-
Cl-14.6 (c)(Physical tests on round wires/formed wires- Torsion test for round wires)	-	500	-
Cl-14.6 (d)(Physical tests on round wires/formed wires- Winding test for formed wires)	-	500	-
Cl-14.6 (e)(Physical tests on round wires/formed wires- Uniformity of zinc coating)	-	500	-
Cl-14.6 (f)(Physical tests on round wires/formed wires- Mass of zinc coating)	-	500	-
Cl-14.6 (g)(Physical tests on round wires/formed wires- Resistivity.)	-	500	-
Cl-10, 13, 15(Test for thickness of insulation and sheath)	-	200	-
Cl-16.1 (v) (1)(PVC Sheath- Tensile strength and elongation at break;)	-	200	-
Cl-16.1 (v) (2)(PVC Sheath- Ageing in air oven)	-	500	-
Cl-16.1 (v) (3)(PVC Sheath- Loss of mass in air oven)	-	500	-
Cl-16.1 (v) (6)(PVC Sheath- Heat shock test)	-	500	-
Cl-16.1 (v) (7)(PVC Sheath- Thermal stability)	-	500	-
Cl-8.3-Table 1A(PE Sheath- Carbon black content)	-	1000	-
Cl-8.3-Table 1A(PE Sheath- Tensile strength and elongation at break before and after ageing)	-	1000	-
Cl-8.3-Table 1A(PE Sheath- Hot deformation)	-	1000	-
Cl-8.3-Table 1A(PE Sheath- Shrinkage test.)	-	1000	-
Cl- Table 1B(LSHF Sheath- Tensile strength and elongation at break before and after ageing)	-	1000	-
Cl- Table 1B(LSHF Sheath- Hot deformation)	-	1000	-
Cl- Table 1B(LSHF Sheath- Shrinkage test)	-	1000	-
Cl-17.2(High voltage test)	-	500	-
Cl-17.3(Flammability test)	-	500	-
Cl-17.4(Oxygen index test (FR, FR-LSH or LSHF Sheath))	-	2500	-
Cl-17.5(Flame retardance test on single cable)	-	5000	-
Cl-17.6(Flame retardance test on bunched cables (FR, FR-LSH or LSHF Sheathed Cables))	-	5000	-
Cl-17.7(Test for halogen acid evolution (FR-LSH or LSHF Outer Sheath))	-	2500	-
Cl-17.8(Smoke density test (FR-LSH or LSHF Sheath))	-	2500	-
Cl-17.9(Temperature index test; (FR, FR-LSH or LSHF Sheath))	-	2500	-
Cl-17.10(Test for pH and conductivity of LSHF Sheath)	-	500	-
Cl-17.11(Test for light transmission for LSHF Sheathed Cables)	-	200	-
Cl-16.4 (i)(Cold bend test for outer sheath)	-	500	-
Cl-16.4 (ii)(Cold impact test for outer sheath)	-	500	-
Cl-16.4 (iii)(Cold elongation test for LSHF sheath)	-	500	-
Cl-16.1 (v) (5)(PVC Sheath- Hot deformation test)	-	500	-
Cl- Table 1B(LSHF Sheath- Water absorption test)	-	2000	-

26 Sep, 2028

-
Included w.e.f 12.09.2025

IS 427 (2013)

Distemper, dry, colour as required - Specification (Third Revision)

All Grade and Types

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3.1(Lead restriction)	-	500	-
4.2.2 & 7, Table-1(iv)(Colour)	-	1000	-
4.2.2 & 7, Table-1(v)(Fastness to light)	-	1500	-
4.2.2 & 7, Table-1(vii)(Recoating properties)	-	500	-
4.2.2 & 7, Table-1(viii)(Resistance to alkali)	-	500	-
4.2.2 & 7, Table-1(ix)(Resistance to dry rubbing)	-	500	-
4.1(Form and Condition)	-	200	-
4.2.1(Composition)	-	300	-
4.2.2 & 7, Table-1(i)(Drying time)	-	500	-
4.2.2 & 7, Table-1(ii)(Consistency)	-	500	-
4.2.2 & 7, Table-1(iii)(Finish)	-	500	-
4.2.2 & 7, Table-1(vi)(Residue on seive)	-	1000	-

26 Sep, 2028

-
Included w.e.f. 14.08.2025

IS 5410 (2013)

Cement paint - Specification (Second Revision)

All Grade and Types

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4.8, 7.1 - Table 1 ix)(Recoating Properties)	-	500	-
Cl.4.8, 7.1 - Table 1 vi)(Resistance to dry rubbing)	-	500	-
Cl.4.8, 7.1 - Table 1 iv)(Fastness to light)	-	1000	-
Cl.4.8, 7.1 - Table 1 iii)(Colour)	-	1000	-
Cl.4.4(Lead Restriction)	-	1000	-
Cl.4.1(Composition - Hydrated Lime)	-	500	-
Cl.4.1(Composition - Portland Cement)	-	500	-
Cl.4.7(Keeping Properties)	-	500	-
Cl.4.8, 7.1 - Table 1 viii)(Pot life of mixed paint)	-	500	-
Cl.4.8, 7.1 - Table 1 vii)(Water Repellency)	-	1000	-
Cl.4.8, 7.1 - Table 1 v)(Residue on sieve (on dry material))	-	500	-
Cl.4.8, 7.1 - Table 1 ii)(Finish)	-	500	-
Cl.4.8, 7.1 - Table 1 i)(Drying Time, Hard Dry)	-	500	-
Cl.4.6(Durability)	-	1000	-
Cl.4.2(Preparation for Use)	-	200	-
Cl.4.1.1(Freedom from Organic Binders)	-	300	-

26 Sep, 2028

-
Included w.e.f. 14.08.2025

First
Prev
2
3
4
5
Next
Last

Bureau of Indian Standards

The National Standards Body of India

Stellar Test House, Noida

G-68, Sector-63, Noida, Gautam Buddha Nagar, Uttar Pradesh, 201301

8130190099 ankit@stellartesthouse.com

Scope List