BIS - LIMS (Laboratory Information Management System)

ABSOLUTE EXPERTISE TESTING LABORATORY LLP

PLOT NO.1, KH NO. 23/1, 1ST FLOOR, AMBEY GARDEN, VILLAGE LIBASPUR, NORTH WEST, DELHI-110042, NEW DELHI, North West, Delhi, 110042

7065432161 info.aetllab@gmail.com

Scope List

Reset

41 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 10322 (Part 5/Sec 7) (2026)

Luminaires Part 5: Particular requirements Section 7: Lighting chains (Second Revision)

84999.99 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-20.4(General test requirements)	-	6000	-
Cl-20.5.2(Protection against electric shock)	-	6000	-
Cl-20.6.1(Marking-General)	-	6000	-
Cl-20.6.2(Lighting chain marking)	-	6000	-
Cl-20.6.3(Lighting chain and packaging marking)	-	6000	-
Cl-20.6.4(Packaging or instructions marking)	-	6000	-
Cl-20.7.1(Construction- General)	-	5999.99	-
Cl-20.7.2(Lampholders)	-	5999.99	-
Cl-20.7.4(Terminals and supply connections)	-	6000	-
Cl-20.7.5(Gaskets)	-	6000	-
Cl-20.7.6(Mechanical strength)	-	6000	-
Cl-20.7.7(Lamp bridging devices)	-	5999.99	-
Cl-20.7.8(Control units and controlgear)	-	6000	-
Cl-20.7.9(Lamp rotation)	-	6000	-
Cl-20.7.10(Lamp insertion and withdrawal force)	-	6000	-
Cl-20.7.11(Lamp mechanical requirements)	-	6000	-
Cl-20.7.12(Temporarily installed protected lighting (TPL) chains)	-	6000	-
Cl-20.8(Creepage distances and clearances)	-	6000	-
Cl-20.10(Terminals)	-	6000	-
Cl-20.11.2(Cables for lighting chains)	-	6000	-
Cl-20.11.3(Cord anchorage test)	-	6000	-
Cl-20.11.4(Plugs and cable length)	-	6000	-
Cl-20.11.5(Maximum length of extendable class II lighting chains)	-	6000	-
Cl-20.12(Protection against electric shock)	-	6000	-
Cl-20.12.2(Divisible plug)	-	5999.99	-
Cl-20.12.3(Electrification of decorations)	-	6000	-
Cl-20.12.4(Contacts of push-in lampholders)	-	5999.98	-
Cl-20.12.5(Blanking plugs)	-	5999.99	-
Cl-20.13.2(Test voltage)	-	6000	-
Cl-20.13.3(Lamp bridging devices)	-	6000	-
Cl-20.13.4(Short-circuit test of rectifier)	-	5999.98	-
Cl-20.14(Resistance to dust, solid objects and moisture)	-	5999.98	-
Cl-20.15(Insulation resistance and electric strength)	-	6000	-
Cl-20.16(Resistance to heat, fire and tracking)	-	5999.98	-
Cl-20.4(General test requirements)	-	5999.99	-
Cl-20.5.2(Protection against electric shock)	-	6000	-
Cl-20.6.1(Marking-General)	-	6000	-
Cl-20.6.2(Lighting chain marking)	-	6000	-
Cl-20.6.3(Lighting chain and packaging marking)	-	6000	-
Cl-20.6.4(Packaging or instructions marking)	-	6000	-
Cl-20.7.1(Construction- General)	-	6000	-
Cl-20.7.2(Lampholders)	-	6000	-
Cl-20.7.4(Terminals and supply connections)	-	6000	-
Cl-20.7.5(Gaskets)	-	6000	-
Cl-20.7.6(Mechanical strength)	-	6000	-
Cl-20.7.7(Lamp bridging devices)	-	5999.99	-
Cl-20.7.8(Control units and controlgear)	-	6000	-
Cl-20.7.9(Lamp rotation)	-	6000	-
Cl-20.7.10(Lamp insertion and withdrawal force)	-	6000	-
Cl-20.7.11(Lamp mechanical requirements)	-	6000	-
Cl-20.7.12(Temporarily installed protected lighting (TPL) chains)	-	6000	-
Cl-20.8(Creepage distances and clearances)	-	6000	-
Cl-20.10(Terminals)	-	6000	-
Cl-20.11.2(Cables for lighting chains)	-	6000	-
Cl-20.11.3(Cord anchorage test)	-	6000	-
Cl-20.11.4(Plugs and cable length)	-	6000	-
Cl-20.11.5(Maximum length of extendable class II lighting chains)	-	6000	-
Cl-20.12(Protection against electric shock)	-	6000	-
Cl-20.12.2(Divisible plug)	-	6000	-
Cl-20.12.3(Electrification of decorations)	-	6000	-
Cl-20.12.4(Contacts of push-in lampholders)	-	6000	-
Cl-20.12.5(Blanking plugs)	-	6000	-
Cl-20.13.2(Test voltage)	-	6000	-
Cl-20.13.3(Lamp bridging devices)	-	6000	-
Cl-20.13.4(Short-circuit test of rectifier)	-	6000	-
Cl-20.14(Resistance to dust, solid objects and moisture)	-	6000	-
Cl-20.15(Insulation resistance and electric strength)	-	5999.98	-
Cl-20.16(Resistance to heat, fire and tracking)	-	6000	-
Cl-20.4(General test requirements)	-	5999.98	-
Cl-20.5.2(Protection against electric shock)	-	6000	-
Cl-20.6.1(Marking-General)	-	6000	-
Cl-20.6.2(Lighting chain marking)	-	6000	-
Cl-20.6.3(Lighting chain and packaging marking)	-	5999.98	-
Cl-20.6.4(Packaging or instructions marking)	-	6000	-
Cl-20.7.1(Construction- General)	-	6000	-
Cl-20.7.2(Lampholders)	-	6000	-
Cl-20.7.4(Terminals and supply connections)	-	5999.97	-
Cl-20.7.5(Gaskets)	-	5999.98	-
Cl-20.7.6(Mechanical strength)	-	6000	-
Cl-20.7.7(Lamp bridging devices)	-	6000	-
Cl-20.7.8(Control units and controlgear)	-	5999.98	-
Cl-20.7.9(Lamp rotation)	-	5999.98	-
Cl-20.7.10(Lamp insertion and withdrawal force)	-	6000	-
Cl-20.7.11(Lamp mechanical requirements)	-	5999.98	-
Cl-20.7.12(Temporarily installed protected lighting (TPL) chains)	-	6000	-
Cl-20.8(Creepage distances and clearances)	-	6000	-
Cl-20.10(Terminals)	-	6000	-
Cl-20.11.2(Cables for lighting chains)	-	6000	-
Cl-20.11.3(Cord anchorage test)	-	6000	-
Cl-20.11.4(Plugs and cable length)	-	6000	-
Cl-20.11.5(Maximum length of extendable class II lighting chains)	-	6000	-
Cl-20.12(Protection against electric shock)	-	6000	-
Cl-20.12.2(Divisible plug)	-	6000	-
Cl-20.12.3(Electrification of decorations)	-	6000	-
Cl-20.12.4(Contacts of push-in lampholders)	-	6000	-
Cl-20.12.5(Blanking plugs)	-	6000	-
Cl-20.13.2(Test voltage)	-	6000	-
Cl-20.13.3(Lamp bridging devices)	-	5999.98	-
Cl-20.13.4(Short-circuit test of rectifier)	-	6000	-
Cl-20.14(Resistance to dust, solid objects and moisture)	-	6000	-
Cl-20.15(Insulation resistance and electric strength)	-	5999.98	-
Cl-20.16(Resistance to heat, fire and tracking)	-	6000	-

11 Mar, 2027

-
Included w.e.f 07.08.2026 Exclusions: Cl-20.7.1 (Construction- General) Cl-20.14 (Resistance to dust, solid objects and moisture)

IS 10322 (Part 5/Sec 6) (2026)

Luminaires Part 5: Particular requirements Section 6: Handlamps (First Revision)

85000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-8.4(General test requirements)	-	7000	-
Cl-8.6(Marking)	-	7000	-
Cl-8.7(Construction)	-	8999.99	-
Cl-8.7.1(Handle of the handlamp)	-	7000	-
Cl-8.7.2(Lamp)	-	7000	-
Cl-8.7.4(Tungsten filament lamps)	-	7000	-
Cl-8.7.5(Flexible cable or cord)	-	7000	-
Cl-8.7.6(Mechanical strength)	-	6999.99	-
Cl-8.7.6.1(Translucent covers and protective covers)	-	7000	-
Cl-8.8(Creepage distances and clearances)	-	7000	-
Cl-8.10(Terminals)	-	7000	-
Cl-8.10.1(Terminals for supply connection)	-	7000	-
Cl-8.11(External and internal wiring)	-	7000	-
Cl-8.11.1(Rewirable handlamps)	-	7000	-
Cl-8.11.1(Non-rewirable handlamps)	-	7000	-
Cl-8.12(Protection against electric shock)	-	7000	-
Cl-8.13(Endurance tests and thermal tests)	-	9000	-
Cl-8.13.1(Endurance test)	-	7000	-
Cl-8.13.2(Thermal tests)	-	7000	-
Cl-8.13.3(Limiting temperature)	-	6999.98	-
Cl-8.14(Resistance to dust and moisture)	-	9000	-
Cl-8.15(Insulation resistance and electric strength)	-	7000	-
Cl-8.16(Resistance to heat, fire and tracking)	-	9000	-
Cl-8.4(General test requirements)	-	-	-
Cl-8.6(Marking)	-	-	-
Cl-8.7(Construction)	-	-	-
Cl-8.7.1(Handle of the handlamp)	-	-	-
Cl-8.7.2(Lamp)	-	-	-
Cl-8.7.4(Tungsten filament lamps)	-	-	-
Cl-8.7.5(Flexible cable or cord)	-	-	-
Cl-8.7.6(Mechanical strength)	-	-	-
Cl-8.7.6.1(Translucent covers and protective covers)	-	-	-
Cl-8.8(Creepage distances and clearances)	-	-	-
Cl-8.10(Terminals)	-	-	-
Cl-8.10.1(Terminals for supply connection)	-	-	-
Cl-8.11(External and internal wiring)	-	-	-
Cl-8.11.1(Rewirable handlamps)	-	-	-
Cl-8.11.1(Non-rewirable handlamps)	-	-	-
Cl-8.12(Protection against electric shock)	-	-	-
Cl-8.13(Endurance tests and thermal tests)	-	-	-
Cl-8.13.1(Endurance test)	-	-	-
Cl-8.13.2(Thermal tests)	-	-	-
Cl-8.13.3(Limiting temperature)	-	-	-
Cl-8.14(Resistance to dust and moisture)	-	-	-
Cl-8.15(Insulation resistance and electric strength)	-	-	-
Cl-8.16(Resistance to heat, fire and tracking)	-	-	-

11 Mar, 2027

-
Included w.e.f. 20.07.2026 Exclusion: "Cl-8.7 (Construction)Photobiological Hazard CL 7.34 OF IS 10322-1 Electromagnetic fields (EMF) Cl-8.14 (Resistance to dust and moisture) CL 11.2.12 & 11.2.13 OF IS 10322-1 High pressure and temperature water jet-proof luminaires - Tests for second characteristic IP numeral 9 (80 °C) & High pressure and cold water jet-proof luminaires - Tests for second characteristic IP numeral 9 (15°C)"

IS 16103 : Part 1 (2025)

LED Modules for General Lighting Part 1 Safety Specifications (First Revision)

32000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6(Marking)	-	4000	-
Cl-7.1(Integral terminals)	-	4000	-
Cl-7.2(Terminals other than integral terminals)	-	4000	-
Cl-8(Earthing)	-	4000	-
Cl-9(Protection against accidental contact with live parts)	-	4000	-
Cl-10(Moisture resistance and insulation)	-	7000	-
Cl-11(Electric strength)	-	4000	-
Cl-12.1(Fault conditions- General)	-	4000	-
Cl-12.2(Overpower condition)	-	7000	-
Cl-13(Conformity testing during manufacture)	-	0	-
Cl-15(Creepage distances and clearances)	-	4000	-
Cl-16(Screws, current-carrying parts and connections)	-	4000	-
Cl-17(Resistance to heat, fire and tracking)	-	7000	-
Cl-18(Resistance to corrosion)	-	5000	-
Cl-19(Information for luminaire design)	-	0	-
Cl-20.1(Heat management- General)	-	4000	-
Cl-20.2(Thermal interface material)	-	4000	-
Cl-20.3(Heat protection)	-	7000	-
Cl-6(Marking)	-	4000	-
Cl-7.1(Integral terminals)	-	4000	-
Cl-7.2(Terminals other than integral terminals)	-	3999.99	-
Cl-8(Earthing)	-	4999.98	-
Cl-9(Protection against accidental contact with live parts)	-	4000	-
Cl-10(Moisture resistance and insulation)	-	5999.99	-
Cl-11(Electric strength)	-	4999.98	-
Cl-12.1(Fault conditions- General)	-	3999.98	-
Cl-12.2(Overpower condition)	-	4000	-
Cl-13(Conformity testing during manufacture)	-	3999.98	-
Cl-15(Creepage distances and clearances)	-	4000	-
Cl-16(Screws, current-carrying parts and connections)	-	4000	-
Cl-17(Resistance to heat, fire and tracking)	-	6000	-
Cl-18(Resistance to corrosion)	-	4000	-
Cl-19(Information for luminaire design)	-	4000	-
Cl-20.1(Heat management- General)	-	3999.98	-
Cl-20.2(Thermal interface material)	-	4000	-
Cl-20.3(Heat protection)	-	4000	-
Cl-6(Marking)	-	4000	-
Cl-7.1(Integral terminals)	-	4000	-
Cl-7.2(Terminals other than integral terminals)	-	4000	-
Cl-8(Earthing)	-	7000	-
Cl-9(Protection against accidental contact with live parts)	-	6999.98	-
Cl-10(Moisture resistance and insulation)	-	7999.99	-
Cl-11(Electric strength)	-	3999.97	-
Cl-12.1(Fault conditions- General)	-	6999.98	-
Cl-12.2(Overpower condition)	-	4000	-
Cl-13(Conformity testing during manufacture)	-	4000	-
Cl-15(Creepage distances and clearances)	-	4000	-
Cl-16(Screws, current-carrying parts and connections)	-	4000	-
Cl-17(Resistance to heat, fire and tracking)	-	6999.99	-
Cl-18(Resistance to corrosion)	-	4000	-
Cl-19(Information for luminaire design)	-	3999.99	-
Cl-20.1(Heat management- General)	-	3999.99	-
Cl-20.2(Thermal interface material)	-	4000	-
Cl-20.3(Heat protection)	-	4000	-

11 Mar, 2027

-
Included w.e.f 22.07.2026 Exclusion: "Cl-13 (Conformity testing during manufacture) Cl-21.1 (UV radiation) Cl-21.2 (Blue light hazard)"

IS 10322 (Part 5/Sec 5) (2026)

Luminaires Part 5: Particular requirements Section 5: Floodlights (Second Revision)

85000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.5(Marking)	-	7000	-
Cl-5.6(Construction)	-	9000	-
Cl-5.6.8.1(Protection by the use of glass that fractures into small pieces)	-	7000	-
5.6.8.2(Protection by the use of high impact resistant glass (high mechanical strength.))	-	7000	-
Cl-5.6.8.2.1(Thermal endurance test)	-	9000	-
Cl-5.7(Creepage distances and clearances)	-	7000	-
Cl-5.8(Provision for earthing)	-	7000	-
Cl-5.9(Terminals)	-	7000	-
Cl-5.10(External and internal wiring)	-	7000	-
Cl-5.11(Protection against electric shock)	-	7000	-
Cl-5.12(Endurance tests and thermal tests)	-	9000	-
Cl-5.13(Resistance to dust and moisture)	-	9000	-
Cl-5.14(Insulation resistance and electric strength)	-	8000	-
Cl-5.15(Resistance to heat, fire and tracking)	-	9000	-

11 Mar, 2027

-
Included w.e.f. 09.06.2026 Exclusion: "Cl-5.6 (Construction) Cl-5.13 (Resistance to dust and moisture)" Photobiological Hazard

IS 10322 (Part 5/Sec 3) (2026)

Luminaires Part 5: Particular requirements Section 3: Luminaires for road and street lighting (Second Revision)

85000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3.2(General test requirements)	-	7000	-
Cl-3.5(Marking)	-	7000	-
Cl-3.6.1(All luminaires)	-	9000	-
Cl-3.6.2(Luminaires for suspension on span wires)	-	7000	-
Cl-3.6.3(Luminaire or external part)	-	7000	-
Cl-3.6.4(Lampholders or optical part)	-	7000	-
Cl-3.6.5(Breaking glass (glass covers))	-	7000	-
Cl-3.6.5.2.1(high mechanical strength)	-	7000	-
Cl-3.7(Creepage distances and clearances)	-	7000	-
Cl-3.8(Provision for earthing)	-	7000	-
Cl-3.8.1(Fixed part of the terminal)	-	7000	-
Cl-3.9(Terminals)	-	7000	-
Cl-3.10(External and internal wiring)	-	7000	-
Cl-3.10.1(Road and street lighting)	-	7000	-
Cl-3.11(Protection against electric shock)	-	7000	-
Cl-3.12(Endurance tests and thermal tests)	-	9000	-
Cl-3.13(Resistance to dust and moisture)	-	9000	-
Cl-3.14(Insulation resistance and electric strength)	-	8000	-
Cl-3.15(Resistance to heat, fire and tracking)	-	8000	-
Cl-3.15(Resistance to heat, fire and tracking)	-	8000	-
Cl-3.15(Resistance to heat, fire and tracking)	-	8000	-
Cl-3.15(Resistance to heat, fire and tracking)	-	8000	-

11 Mar, 2027

-
Included w.e.f. 09.06.2026 Exclusion: Cl-3.13 (Resistance to dust and moisture) Cl-3.6.1 (All luminaires) Photobiological Hazard

IS 10322 (Part 5/Sec 2) (2026)

Luminaires Part 5: Particular requirements Section 2: Recessed luminaires and recessed air-handling luminaires (Second Revision)

85000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-2.4(General test requirements)	-	6000	-
Cl-2.6.2(Marking)	-	6000	-
Cl-2.6.3(Marking)	-	6000	-
Cl-2.6.4(Marking)	-	6000	-
Cl-2.7(Construction)	-	7999.98	-
Cl-2.8(Creepage distances and clearances)	-	6000	-
Cl-2.9(Provision for earthing)	-	6000	-
Cl-2.10(Terminals)	-	6000	-
Cl-2.11(External and internal wiring)	-	6000	-
Cl-2.12(Protection against electric shock)	-	6000	-
Cl-2.13(Endurance tests and thermal tests)	-	8000	-
Cl-2.14(Resistance to dust and moisture)	-	8000	-
Cl-2.15(Insulation resistance and electric strength)	-	6000	-
Cl-2.16(Resistance to heat, fire and tracking)	-	8000	-
Cl-2.4(General test requirements)	-	6000	-
Cl-2.6.2(Marking)	-	8000	-
Cl-2.6.3(Marking)	-	7999.99	-
Cl-2.6.4(Marking)	-	7999.98	-
Cl-2.7(Construction)	-	6000	-
Cl-2.8(Creepage distances and clearances)	-	6000	-
Cl-2.9(Provision for earthing)	-	7999.98	-
Cl-2.10(Terminals)	-	5999.98	-
Cl-2.11(External and internal wiring)	-	5999.99	-
Cl-2.12(Protection against electric shock)	-	8000	-
Cl-2.13(Endurance tests and thermal tests)	-	8000	-
Cl-2.14(Resistance to dust and moisture)	-	8000	-
Cl-2.15(Insulation resistance and electric strength)	-	5999.98	-
Cl-2.16(Resistance to heat, fire and tracking)	-	8000	-

11 Mar, 2027

-
Included w.e..f 22.07.2026 Exclusion: "Cl-2.7 (Construction) photobiological Hazard Cl-2.14 (Resistance to dust and moisture)"

IS 10322 (Part 5/Sec 1) (2026)

Luminaires Part 5: Particular requirements Section 1: Fixed general purpose luminaires (Second Revision)

85000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-1.4(General test requirements)	-	6000	-
Cl-1.6(Marking)	-	6000	-
Cl-1.7(Construction)	-	8000	-
Cl-1.8(Creepage distances and clearances)	-	6000	-
Cl-1.9(Provision for earthing)	-	6000	-
Cl-1.10(Terminals)	-	6000	-
Cl-1.11(External and internal wiring)	-	6000	-
Cl-1.12(Protection against electric shock)	-	6000	-
Cl-1.12(Protection against electric shock)	-	6000	-
Cl-1.13(Endurance tests and thermal tests)	-	8000	-
Cl-1.14(Resistance to dust, solid objects and moistur)	-	8000	-
Cl-1.15(" Insulation resistance and electric strength, touch current and protective conductor current")	-	6000	-
Cl-1.16(Resistance to heat, fire and tracking)	-	8000	-
Cl-1.4(General test requirements)	-	6000	-
Cl-1.6(Marking)	-	7999.98	-
Cl-1.7(Construction)	-	6000	-
Cl-1.8(Creepage distances and clearances)	-	6000	-
Cl-1.9(Provision for earthing)	-	8000	-
Cl-1.10(Terminals)	-	6000	-
Cl-1.11(External and internal wiring)	-	6000	-
Cl-1.12(Protection against electric shock)	-	7999.99	-
Cl-1.12(Protection against electric shock)	-	7999.98	-
Cl-1.13(Endurance tests and thermal tests)	-	6000	-
Cl-1.14(Resistance to dust, solid objects and moistur)	-	7999.99	-
Cl-1.15(" Insulation resistance and electric strength, touch current and protective conductor current")	-	6000	-
Cl-1.16(Resistance to heat, fire and tracking)	-	8000	-

11 Mar, 2027

-
Included w.e.f. 22.07.2026 Exclusion: "Cl-2.7 (Construction) photobiological Hazard Cl-2.14 (Resistance to dust and moisture)"

IS 16102 (Part 1) (2026)

Self-Ballasted LED Lamps for General Lighting Services Part 1 Safety Requirements (First Revision)

75000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirenents and General Test Requirements)	-	8000	-
Cl-6.1(Cap Interchangeability)	-	8000	-
Cl-6.2(Bending Moment and Mass Imparted by the Lamp at the Lamp Holder)	-	8000	-
Cl-7(Protection Against Accidental Contact with live parts)	-	8000	-
Cl-8.1(Insulation resistance and electric strength)	-	8000	-
Cl-8.2(Insulation Resistance lamp)	-	8000	-
Cl-8.3(Electric Strength)	-	8000	-
Cl-9.1(Mechanical Strength Requirements)	-	8000	-
Cl-9.2.1(Torsion Resistance of Unused Lamps)	-	8000	-
Cl-9.2.2(Torsion Resistance of Lamps after a Defined Time of Usage)	-	8000	-
Cl-9.2.3(Externally Applied Axial Pull and Bending Moment)	-	8000	-
Cl-9.3(Axial Strength of Edison Caps)	-	8000	-
Cl-10(Cap Temperature Rise)	-	10000	-
Cl-11(Resistance to Heat)	-	8000	-
Cl-12(Resistance to Flame and Ignition)	-	8000	-
Cl-13.1(Fault Conditions- General Requirements)	-	8000	-
Cl-14(Creepage Distance and Clearances)	-	8000	-
Cl-15(Abnormal Operation)	-	8000	-
Cl-16(Test Conditions for Dimmable Lamps)	-	8000	-
Cl-18(Ingress Protection Requirements)	-	8000	-
Cl-20.3(Accidentally Broken Lamps)	-	0	-
Cl-5(Marking)	-	8000	-

11 Mar, 2027

-
Included w.e.f. 09.06.2026 Exclusion: "Cl-17.1 (UV Radiation) Cl-17.2 (Blue Light Hazard) Cl-19 (Information for luminaire design)"

IS/IEC 62368 : Part 1 (2023)

Audio Video Information and Communication Technology Equipment - Part 1: Safety Requirements (Second Revision)

75000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(General- materials, components)	-	5000	-
Cl-4.2(Energy source classifications)	-	5000	-
Cl-4.3(Protection against energy sources)	-	5000	-
Cl-4.4(Safeguards)	-	5000	-
Cl-4.5(Explosion)	-	5000	-
Cl-4.6(Fixing of conductors and conductive parts)	-	5000	-
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	5000	-
Cl-4.8(Equipment containing coin or button cell batteries)	-	5000	-
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	5000	-
Cl-4.10(Components requirements)	-	5000	-
Cl-5.1(General- Electrically-caused injury)	-	5000	-
Cl-5.2(Classification and limits of electrical energy sources)	-	5000	-
Cl-5.3(Protection against electrical energy sources)	-	5000	-
Cl-5.4(Insulation materials and requirements)	-	5000	-
Cl-5.5(Components as safeguards)	-	5000	-
Cl-5.6(Protective conductor)	-	5000	-
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	5000	-
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	5000	-
Cl-6.1(General- Electrically-caused fire)	-	5000	-
Cl-6.2(Classification of power sources and potential ignition sources)	-	5000	-
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	5000	-
Cl-6.4(Safeguards against fire under single fault conditions)	-	5000	-
Cl-6.5(Internal and external wiring)	-	5000	-
Cl-7.2(Reduction of exposure to hazardous substances)	-	5000	-
Cl-7.1(General- Injury caused by hazardous substances)	-	5000	-
Cl-7.3(Ozone exposure)	-	5000	-
Cl-7.4(Use of personal safeguards or personal protective equipment (PPE)	-	5000	-
Cl-7.5(Use of instructional safeguards and instructions)	-	5000	-
Cl-8.1(General- Mechanically-caused injury)	-	5000	-
Cl-8.2(Mechanical energy source classifications)	-	5000	-
Cl-8.3(Safeguards against mechanical energy sources)	-	5000	-
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	5000	-
Cl-8.5(Safeguards against moving parts)	-	5000	-
Cl-8.6(Stability of equipment)	-	5000	-
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	5000	-
Cl-8.8(Handle strength)	-	5000	-
Cl-8.9(Wheels or casters attachment requirements)	-	5000	-
Cl-8.10(Carts, stands, and similar carriers)	-	5000	-
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	5000	-
Cl-9.1(General-Thermal burn injury)	-	5000	-
Cl-9.2(Thermal energy source classifications)	-	5000	-
Cl-9.3(Touch temperature limits)	-	5000	-
Cl-9.4(Safeguards against thermal energy sources)	-	5000	-
Cl-9.5(Requirements for safeguards)	-	5000	-
Cl-9.6(Requirements for wireless power transmitters)	-	5000	-
Annex A(Examples of equipment within the scope of this document)	-	5000	-
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	5000	-
Annex B-2(Normal operating conditions)	-	5000	-
Annex B-3(Simulated abnormal operating conditions)	-	5000	-
Annex B-4(Simulated single fault conditions)	-	5000	-
Annex D-1(Impulse test generators)	-	5000	-
Annex D-2(Antenna interface test generator)	-	5000	-
Annex D-3(Electronic pulse generator)	-	5000	-
Annex E-1(Electrical energy source classification for audio signals)	-	5000	-
Annex E-2(Audio signals used during test)	-	5000	-
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	5000	-
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	5000	-
Annex F-2(Letter symbols and graphical symbols)	-	5000	-
Annex F-3(Equipment markings)	-	5000	-
Annex F-4(Instructions)	-	5000	-
Annex F-5(Instructional safeguards)	-	5000	-
Annex G-1(Switches)	-	5000	-
Annex G-4(Connectors)	-	5000	-
Annex G-5(Wound components)	-	5000	-
Annex G-6(Wire insulation)	-	5000	-
Annex G-7(Mains power supply cords and interconnection cables)	-	5000	-
Annex G-8(Varistors)	-	5000	-
Annex G-10(Resistors)	-	5000	-
Annex G-11(Capacitors and RC units)	-	5000	-
Annex G-12(Optocouplers)	-	5000	-
Annex G-13(Printed boards)	-	5000	-
Annex G-14(Coatings on component terminals)	-	5000	-
Annex G-16(IC that includes a capacitor discharge function (ICX))	-	5000	-
Annex H-1(General- Criteria for telephone ringing signals)	-	5000	-
Annex H-2(Method A)	-	5000	-
Annex H-3(Method B)	-	5000	-
Annex I(Overvoltage categories (see IEC 60364-4-44))	-	5000	-
Annex J-1(General-Insulated winding wires for use without interleaved insulation)	-	5000	-
Annex J-2(Type tests)	-	5000	-
Annex J-3(Testing during manufacturing)	-	5000	-
Annex K-1(General- Safety interlocks)	-	5000	-
Annex K-2(Components of the safety interlock safeguard mechanism)	-	5000	-
Annex K-3(Inadvertent change of operating mode)	-	5000	-
Annex K-4(Interlock safeguard override)	-	5000	-
Annex K-5(Fail-safe)	-	5000	-
Annex K-6(Mechanically operated safety interlocks)	-	5000	-
Annex K-7(Interlock circuit isolation)	-	5000	-
Annex L-1(General requirements)	-	5000	-
Annex L-2(Permanently connected equipment)	-	5000	-
Annex L-3()	-	5000	-
Annex L-4(Single-phase equipment)	-	5000	-
Annex L-5(Three-phase equipment)	-	5000	-
Annex L-6(Switches as disconnect devices)	-	5000	-
Annex L-7(Plugs as disconnect devices)	-	5000	-
Annex L-8(Multiple power sources)	-	5000	-
Annex L-9(Compliance criteria)	-	5000	-
Annex M-1(General requirements)	-	5000	-
Annex M-2(Safety of batteries and their cells)	-	5000	-
Annex M-9(Preventing electrolyte spillage)	-	5000	-
Annex M-10(Instructions to prevent reasonably foreseeable misuse)	-	5000	-
Annex N(Electrochemical potentials (V))	-	5000	-
Annex O(Measurement of creepage distances and clearances)	-	5000	-
Annex P-1(General-Safeguards against conductive objects)	-	5000	-
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	5000	-
Annex P-3(Safeguards against spillage of internal liquids)	-	5000	-
Annex P-4(Metallized coatings and adhesives securing parts)	-	5000	-
Annex Q-1(Limited power source)	-	5000	-
Annex Q-2(Test for external circuits – paired conductor cable)	-	5000	-
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	5000	-
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	5000	-
Annex S-3(Flammability tests for the bottom of a fire enclosure)	-	5000	-
Annex S-4(Flammability classification of materials)	-	5000	-
Annex S-6(Grille covering material, cloth, and reticulated foam)	-	5000	-
Annex T-1(General-Mechanical strength tests)	-	5000	-
Annex T-2(Steady force test, 10 N)	-	5000	-
Annex T-3(Steady force test, 30 N)	-	5000	-
Annex T-4(Steady force test, 100 N)	-	5000	-
Annex T-5(Steady force test, 250 N)	-	5000	-
Annex T-6(Enclosure impact test)	-	5000	-
Annex T-7(Drop test)	-	5000	-
Annex T-8(Stress relief test)	-	5000	-
Annex T-9(Glass impact test)	-	5000	-
Annex T-10(Glass fragmentation test)	-	5000	-
Annex T-11(Test for telescoping or rod antennas)	-	5000	-
Annex V-1(Accessible parts of equipment)	-	5000	-
Annex V-2(Accessible part criterion)	-	5000	-
Annex W(Comparison of terms introduced in this document)	-	5000	-
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	5000	-
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	5000	-
Annex Y-3(Resistance to corrosion)	-	5000	-
Annex Y-4(Gaskets)	-	5000	-
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	5000	-
Annex Y-6(Mechanical strength of enclosures)	-	5000	-
Cl-4.1(General- materials, components)	-	5000	-
Cl-4.2(Energy source classifications)	-	5000	-
Cl-4.3(Protection against energy sources)	-	5000	-
Cl-4.4(Safeguards)	-	5000	-
Cl-4.5(Explosion)	-	5000	-
Cl-4.6(Fixing of conductors and conductive parts)	-	5000	-
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	5000	-
Cl-4.8(Equipment containing coin or button cell batteries)	-	5000	-
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	5000	-
Cl-4.10(Components requirements)	-	5000	-
Cl-5.1(General- Electrically-caused injury)	-	5000	-
Cl-5.2(Classification and limits of electrical energy sources)	-	5000	-
Cl-5.3(Protection against electrical energy sources)	-	5000	-
Cl-5.4(Insulation materials and requirements)	-	5000	-
Cl-5.5(Components as safeguards)	-	5000	-
Cl-5.6(Protective conductor)	-	5000	-
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	5000	-
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	5000	-
Cl-6.1(General- Electrically-caused fire)	-	5000	-
Cl-6.2(Classification of power sources and potential ignition sources)	-	5000	-
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	5000	-
Cl-6.4(Safeguards against fire under single fault conditions)	-	5000	-
Cl-6.5(Internal and external wiring)	-	5000	-
Cl-7.2(Reduction of exposure to hazardous substances)	-	5000	-
Cl-7.1(General- Injury caused by hazardous substances)	-	5000	-
Cl-7.3(Ozone exposure)	-	5000	-
Cl-7.4(Use of personal safeguards or personal protective equipment (PPE)	-	5000	-
Cl-7.5(Use of instructional safeguards and instructions)	-	5000	-
Cl-8.1(General- Mechanically-caused injury)	-	5000	-
Cl-8.2(Mechanical energy source classifications)	-	5000	-
Cl-8.3(Safeguards against mechanical energy sources)	-	5000	-
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	5000	-
Cl-8.5(Safeguards against moving parts)	-	5000	-
Cl-8.6(Stability of equipment)	-	5000	-
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	5000	-
Cl-8.8(Handle strength)	-	5000	-
Cl-8.9(Wheels or casters attachment requirements)	-	5000	-
Cl-8.10(Carts, stands, and similar carriers)	-	5000	-
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	5000	-
Cl-9.1(General-Thermal burn injury)	-	5000	-
Cl-9.2(Thermal energy source classifications)	-	5000	-
Cl-9.3(Touch temperature limits)	-	5000	-
Cl-9.4(Safeguards against thermal energy sources)	-	5000	-
Cl-9.5(Requirements for safeguards)	-	5000	-
Cl-9.6(Requirements for wireless power transmitters)	-	5000	-
Annex A(Examples of equipment within the scope of this document)	-	5000	-
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	5000	-
Annex B-2(Normal operating conditions)	-	5000	-
Annex B-3(Simulated abnormal operating conditions)	-	5000	-
Annex B-4(Simulated single fault conditions)	-	5000	-
Annex D-1(Impulse test generators)	-	5000	-
Annex D-2(Antenna interface test generator)	-	5000	-
Annex D-3(Electronic pulse generator)	-	5000	-
Annex E-1(Electrical energy source classification for audio signals)	-	5000	-
Annex E-2(Audio signals used during test)	-	5000	-
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	5000	-
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	5000	-
Annex F-2(Letter symbols and graphical symbols)	-	5000	-
Annex F-3(Equipment markings)	-	5000	-
Annex F-4(Instructions)	-	5000	-
Annex F-5(Instructional safeguards)	-	5000	-
Annex G-1(Switches)	-	5000	-
Annex G-4(Connectors)	-	5000	-
Annex G-5(Wound components)	-	5000	-
Annex G-6(Wire insulation)	-	5000	-
Annex G-7(Mains power supply cords and interconnection cables)	-	5000	-
Annex G-8(Varistors)	-	5000	-
Annex G-10(Resistors)	-	5000	-
Annex G-11(Capacitors and RC units)	-	5000	-
Annex G-12(Optocouplers)	-	5000	-
Annex G-13(Printed boards)	-	5000	-
Annex G-14(Coatings on component terminals)	-	5000	-
Annex G-16(IC that includes a capacitor discharge function (ICX))	-	5000	-
Annex H-1(General- Criteria for telephone ringing signals)	-	5000	-
Annex H-2(Method A)	-	5000	-
Annex H-3(Method B)	-	5000	-
Annex I(Overvoltage categories (see IEC 60364-4-44))	-	5000	-
Annex J-1(General-Insulated winding wires for use without interleaved insulation)	-	5000	-
Annex J-2(Type tests)	-	5000	-
Annex J-3(Testing during manufacturing)	-	5000	-
Annex K-1(General- Safety interlocks)	-	5000	-
Annex K-2(Components of the safety interlock safeguard mechanism)	-	5000	-
Annex K-3(Inadvertent change of operating mode)	-	5000	-
Annex K-4(Interlock safeguard override)	-	5000	-
Annex K-5(Fail-safe)	-	5000	-
Annex K-6(Mechanically operated safety interlocks)	-	5000	-
Annex K-7(Interlock circuit isolation)	-	5000	-
Annex L-1(General requirements)	-	5000	-
Annex L-2(Permanently connected equipment)	-	5000	-
Annex L-3()	-	5000	-
Annex L-4(Single-phase equipment)	-	5000	-
Annex L-5(Three-phase equipment)	-	5000	-
Annex L-6(Switches as disconnect devices)	-	5000	-
Annex L-7(Plugs as disconnect devices)	-	5000	-
Annex L-8(Multiple power sources)	-	5000	-
Annex L-9(Compliance criteria)	-	5000	-
Annex M-1(General requirements)	-	5000	-
Annex M-2(Safety of batteries and their cells)	-	5000	-
Annex M-9(Preventing electrolyte spillage)	-	5000	-
Annex M-10(Instructions to prevent reasonably foreseeable misuse)	-	5000	-
Annex N(Electrochemical potentials (V))	-	5000	-
Annex O(Measurement of creepage distances and clearances)	-	5000	-
Annex P-1(General-Safeguards against conductive objects)	-	5000	-
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	5000	-
Annex P-3(Safeguards against spillage of internal liquids)	-	5000	-
Annex P-4(Metallized coatings and adhesives securing parts)	-	5000	-
Annex Q-1(Limited power source)	-	5000	-
Annex Q-2(Test for external circuits – paired conductor cable)	-	5000	-
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	5000	-
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	5000	-
Annex S-3(Flammability tests for the bottom of a fire enclosure)	-	5000	-
Annex S-4(Flammability classification of materials)	-	5000	-
Annex S-6(Grille covering material, cloth, and reticulated foam)	-	5000	-
Annex T-1(General-Mechanical strength tests)	-	5000	-
Annex T-2(Steady force test, 10 N)	-	5000	-
Annex T-3(Steady force test, 30 N)	-	5000	-
Annex T-4(Steady force test, 100 N)	-	5000	-
Annex T-5(Steady force test, 250 N)	-	5000	-
Annex T-6(Enclosure impact test)	-	5000	-
Annex T-7(Drop test)	-	5000	-
Annex T-8(Stress relief test)	-	5000	-
Annex T-9(Glass impact test)	-	5000	-
Annex T-10(Glass fragmentation test)	-	5000	-
Annex T-11(Test for telescoping or rod antennas)	-	5000	-
Annex V-1(Accessible parts of equipment)	-	5000	-
Annex V-2(Accessible part criterion)	-	5000	-
Annex W(Comparison of terms introduced in this document)	-	5000	-
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	5000	-
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	5000	-
Annex Y-3(Resistance to corrosion)	-	5000	-
Annex Y-4(Gaskets)	-	5000	-
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	5000	-
Annex Y-6(Mechanical strength of enclosures)	-	5000	-

11 Mar, 2027

-
Included w.e.f. 04.06.2026 Exclusion: "Annex C-1 (Protection of materials in equipment from UV radiation) Annex C-2 (UV light conditioning test) Annex D-3 (Electronic pulse generator) Annex G-15 (Pressurized liquid filled components or LFC assemblies) Annex G-2 (Relays) Annex G-3 (Protective devices) Annex G-9 (Integrated circuit (IC) current limiters) Annex M-3 (Protection circuits for batteries provided within the equipment) Annex M-4 (Additional safeguards for equipment containing a secondary lithium battery) Annex M-5 (Risk of burn due to short-circuit during carrying) Annex M-6 (Safeguards against short-circuits) Annex M-7 (Risk of explosion from lead acid and NiCd batteries) Annex M-8 (""Protection against internal ignition from external spark sources of rechargeable batteries with aqueous electrolyte"") Annex R (Limited short-circuit test) Annex S-5 (Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W) Annex U (""Mechanical strength of CRTs and protection against the effects of implosion"") Annex Y-2 (Resistance to UV radiation) Cl-10.1 (General-Radiation) Cl-10.2 (Radiation energy source classifications) Cl-10.3 (Safeguards against laser radiation) Cl-10.4 (""Safeguards against optical radiation from lamps and lamp systems (including LED types)"") Cl-10.5 (Safeguards against X-radiation) Cl-10.6 (Safeguards against acoustic energy sources) "

IS 302 : Part 2 : Sec 74 (2024)

Household and Similar Electrical Appliancesï¿½Safety Part 2 Particular Requirements Section 74 Portable immersion heaters

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	2000	-
8(Protection against access to live parts)	-	2000	-
10(Power input and current)	-	2500	-
10(Power input and current)	-	2500	-
11(Heating)	-	4000	-
13.1 &13.2(Leakage current test)	-	2500	-
13.1 &13.3(Electric strength test)	-	2500	-
14(Transient overvoltages)	-	4000	-
15(Moisture resistance)	-	4000	-
15.3(Moisture resistance)	-	4000	-
16.1 &16.2(Leakage current test)	-	2500	-
16.1 & 16.3(Electric strength test)	-	2500	-
17(Overload protection of transformers and associated circuits)	-	2500	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	5000	-
20.1(Stability and mechanical hazards)	-	2500	-
20.2(Stability and mechanical hazards)	-	2500	-
21(Mechanical strength)	-	3000	-
22(Construction)	-	3000	-
23(Internal wiring)	-	3000	-
25("Supply connection and external flexible cords")	-	3000	-
26("Terminals for external conductors")	-	2000	-
27(Provision for earthing)	-	3500	-
28(Screws and connections)	-	2500	-
29("Clearances, creepage distances and solid insulation")	-	3000	-
30(Resistance to heat and fire)	-	3500	-
30.101(Resistance to heat and fire)	-	2000	-
24.101(Components)	-	2000	-
31(Resistance to rusting)	-	2000	-
32("Radiation, toxicity and similar hazards")	-	2000	-
Cl 19.11.4.4(Voltage surges)	-	4000	-
7(Marking and instructions)	-	2000	-
8(Protection against access to live parts)	-	3500	-
10(Power input and current)	-	3500	-
10(Power input and current)	-	3500	-
11(Heating)	-	4000	-
13.1 &13.2(Leakage current test)	-	3500	-
13.1 &13.3(Electric strength test)	-	3500	-
14(Transient overvoltages)	-	3500	-
15(Moisture resistance)	-	6000	-
15.3(Moisture resistance)	-	6000	-
16.1 &16.2(Leakage current test)	-	3500	-
16.1 & 16.3(Electric strength test)	-	3500	-
17(Overload protection of transformers and associated circuits)	-	3500	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	3500	-
20.1(Stability and mechanical hazards)	-	3500	-
20.2(Stability and mechanical hazards)	-	3500	-
21(Mechanical strength)	-	3500	-
22(Construction)	-	3500	-
23(Internal wiring)	-	2500	-
25("Supply connection and external flexible cords")	-	3500	-
26("Terminals for external conductors")	-	3500	-
27(Provision for earthing)	-	3500	-
28(Screws and connections)	-	3500	-
29("Clearances, creepage distances and solid insulation")	-	3500	-
30(Resistance to heat and fire)	-	3500	-
30.101(Resistance to heat and fire)	-	3500	-
24.101(Components)	-	3500	-
31(Resistance to rusting)	-	3500	-
32("Radiation, toxicity and similar hazards")	-	3500	-
Cl 19.11.4.4(Voltage surges)	-	4000	-
7(Marking and instructions)	-	2000	-
8(Protection against access to live parts)	-	3500	-
10(Power input and current)	-	3500	-
10(Power input and current)	-	3500	-
11(Heating)	-	4000	-
13.1 &13.2(Leakage current test)	-	3500	-
13.1 &13.3(Electric strength test)	-	3500	-
14(Transient overvoltages)	-	3500	-
15(Moisture resistance)	-	6000	-
15.3(Moisture resistance)	-	6000	-
16.1 &16.2(Leakage current test)	-	3500	-
16.1 & 16.3(Electric strength test)	-	3500	-
17(Overload protection of transformers and associated circuits)	-	3500	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	3500	-
20.1(Stability and mechanical hazards)	-	3500	-
20.2(Stability and mechanical hazards)	-	3500	-
21(Mechanical strength)	-	3500	-
22(Construction)	-	3500	-
23(Internal wiring)	-	2500	-
25("Supply connection and external flexible cords")	-	3500	-
26("Terminals for external conductors")	-	3500	-
27(Provision for earthing)	-	3500	-
28(Screws and connections)	-	3500	-
29("Clearances, creepage distances and solid insulation")	-	3500	-
30(Resistance to heat and fire)	-	3500	-
30.101(Resistance to heat and fire)	-	3500	-
24.101(Components)	-	3500	-
31(Resistance to rusting)	-	3500	-
Cl 19.11.4.4(Voltage surges)	-	3500	-
32("Radiation, toxicity and similar hazards")	-	3500	-

11 Mar, 2027

-
Included w.e.f 28.01.2026 Exclusion: Cl 19.11.4.1 (Electrostatic discharges), 19.11.4.2 (Radiated fields), 19.11.4.3 (Fast transient bursts), 19.11.4.5 (Immunity to conducted discharges), 19.11.4.6 (Class 3 Voltage dips and interruptions), 19.11.4.7 (Harmonics), Cl 19.11.4.8 (Abnormal operation), 24.0 (Components), 32.2 (Radiation ,Toxicity and similar hazards)

IS 2312 (1967)

Specification for propeller type AC ventilating fans (First Revision)

230000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
13.1(Marking)	-	2000	-
13.1 (a)(Marking)	-	1000	-
13.1 (b)(Marking)	-	1000	-
13.1 (c)(Marking)	-	1000	-
13.1 (d)(Marking)	-	1000	-
13.1 (e)(Marking)	-	1000	-
13.1 (f)(Marking)	-	1000	-
13.1 (g)(Marking)	-	1000	-
13.1 (h)(Marking)	-	1000	-
13.1 (j)(Marking)	-	1000	-
13.2(Marking)	-	1000	-
13.4(Marking)	-	1000	-
3.1(Sizes )	-	1000	-
4.1(Rated Voltage)	-	500	-
5.1(Rated frequency)	-	500	-
6.1(Design and General Construction)	-	1000	-
6.3(Design and General Construction)	-	1000	-
6.3(Design and General Construction)	-	1000	-
6.4(Design and General Construction)	-	1000	-
6.5(Design and General Construction)	-	1000	-
6.6(Design and General Construction)	-	1000	-
6.7(Design and General Construction)	-	1000	-
6.9(Design and General Construction)	-	1000	-
6.1(Design and General Construction)	-	1000	-
6.11(Design and General Construction)	-	1000	-
6.12(Design and General Construction)	-	1000	-
7.1(Design and General Construction)	-	1000	-
8.1(Design and General Construction)	-	1000	-
9(Design and General Construction)	-	1000	-
10.1(Starting )	-	2000	-
11.1(Interchangeability)	-	2000	-
14.2 & 15.1(Air Delivery)	-	60000	-
14.3.A(Temperature-Rise (for motors))	-	3000	-
14.3.A(Temperature-Rise (for motors))	-	3000	-
14.3.A(Temperature-Rise (for motors))	-	3000	-
14.3.A(Temperature-Rise (for motors))	-	3000	-
14.3.B(Temperature-Rise (for regulators))	-	3000	-
14.3.B(Temperature-Rise (for regulators))	-	3000	-
14.3.B(Moistureproofness (for regulators only))	-	3000	-
14.3.B(Moistureproofness (for regulators only))	-	3000	-
14.5(Mechanical Endurance (for regulators only))	-	2000	-
14.1 & 14.6(Power factor)	-	1000	-
14.7(ac leakage)	-	2000	-
14.8(High voltage test)	-	2000	-
14.9(Insulation-Resistance)	-	2000	-
14.1(Earthing continuity)	-	2000	-
14.11 & 15.1(Electrical Input)	-	2000	-
14.12 & 16(Fan Speed)	-	2000	-
13.1(Marking)	-	0	-
13.1 (a)(Marking)	-	0	-
13.1 (b)(Marking)	-	0	-
13.1 (c)(Marking)	-	0	-
13.1 (d)(Marking)	-	0	-
13.1 (e)(Marking)	-	0	-
13.1 (f)(Marking)	-	0	-
13.1 (g)(Marking)	-	0	-
13.1 (h)(Marking)	-	0	-
13.1 (j)(Marking)	-	0	-
13.2(Marking)	-	0	-
13.4(Marking)	-	0	-
3.1(Sizes )	-	0	-
4.1(Rated Voltage)	-	0	-
5.1(Rated frequency)	-	0	-
6.1(Design and General Construction)	-	0	-
6.3(Design and General Construction)	-	0	-
6.3(Design and General Construction)	-	0	-
6.4(Design and General Construction)	-	0	-
6.5(Design and General Construction)	-	0	-
6.6(Design and General Construction)	-	0	-
6.7(Design and General Construction)	-	0	-
6.9(Design and General Construction)	-	0	-
6.1(Design and General Construction)	-	0	-
6.11(Design and General Construction)	-	0	-
6.12(Design and General Construction)	-	0	-
7.1(Design and General Construction)	-	0	-
8.1(Design and General Construction)	-	0	-
9(Design and General Construction)	-	0	-
10.1(Starting )	-	0	-
11.1(Interchangeability)	-	0	-
14.2 & 15.1(Air Delivery)	-	0	-
14.3(Temperature-Rise)	-	0	-
14.3(Temperature-Rise)	-	0	-
14.3(Temperature-Rise)	-	0	-
14.3(Temperature-Rise)	-	0	-
14.3(Temperature-Rise)	-	0	-
14.3(Temperature-Rise)	-	0	-
14.3(Temperature-Rise)	-	0	-
14.4(Moistureproofness (for regulators only))	-	0	-
14.4(Moistureproofness (for regulators only))	-	0	-
14.5(Mechanical Endurance (for regulators only))	-	0	-
14.1 & 14.6(Power factor)	-	0	-
14.7(ac leakage)	-	0	-
14.8(High voltage test)	-	0	-
14.9(Insulation-Resistance)	-	0	-
14.1(Earthing continuity)	-	0	-
14.11 & 15.1(Electrical Input)	-	0	-
14.12 & 16(Fan Speed)	-	0	-
14.13(Flash Test)	-	2000	-
12(Silent Operation)	-	2000	-
Cl-16(Tolerances on ratings)	-	2000	-

11 Mar, 2027

-
included w.e.f 28.01.2026

IS 4250 (2025)

Electric Food-Mixers (Liquidizers and Grinders) and Centrifugal Juicers ï¿½ Specification ( Second Revision )

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	1000	-
Cl-5(General Conditions for the tests)	-	1000	-
Cl-6(Classification)	-	1000	-
Cl-7(Marking)	-	2000	-
Cl-8(Safety Requirements)	-	25000	-
Cl-9(Endurance fpr motor and base assembly)	-	6000	-
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	2000	-
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	2000	-
Cl-10.4(Idli Batter)	-	2000	-
Cl-10.5(Operational Tests for Juicers)	-	2000	-
Cl-11(Temperature Withstand Test for Bowl)	-	2000	-
Cl-12.1(Test for Switches)	-	2000	-
Cl-13(Strength of Assembly)	-	2000	-
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	2000	-
Cl-14.2, Table-2 (ii)(Power input and current)	-	2000	-
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	2000	-
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	3000	-
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	2000	-
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	1500	-
Cl-19.11.4.4(Surge immunity test)	-	5000	-
Cl-4(General Requirements)	-	1000	-
Cl-5(General Conditions for the tests)	-	1000	-
Cl-6(Classification)	-	1000	-
Cl-7(Marking)	-	2000	-
Cl-8(Safety Requirements)	-	20000	-
Cl-9(Endurance fpr motor and base assembly)	-	4500	-
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	4000	-
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	4000	-
Cl-10.4(Idli Batter)	-	4500	-
Cl-10.5(Operational Tests for Juicers)	-	4500	-
Cl-11(Temperature Withstand Test for Bowl)	-	4500	-
Cl-12.1(Test for Switches)	-	4000	-
Cl-13(Strength of Assembly)	-	3000	-
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	3500	-
Cl-14.2, Table-2 (ii)(Power input and current)	-	3500	-
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	3500	-
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	6000	-
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	3500	-
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	3500	-
Cl-19.11.4.4(Surge immunity test)	-	5000	-

11 Mar, 2027

-
Included w.e.f 28.01.2026 Exclusion: Cl19.11.4.1 (Electrostatic discharges), 19.11.4.2 (Radiated fields), 19.11.4.3 (Fast transient bursts), 19.11.4.5 (Immunity to conducted discharges), 19.11.4.6 (Class 3 Voltage dips and interruptions), 19.11.4.7 (Harmonics), 32 (Radiation ,Toxicity and similar hazards)

IS 302 : Part 2 : SEC 31 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 31 range hoods

37000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No - 5(GENERAL CONDITIONS FOR THE TESTS)	-	1000	-
Clause No - 5.18(linear and angular dimension)	-	1000	-
Clause No - 6.2(harmfull ingress of water)	-	1000	-
Clause No - 8.1.1("PROTECTION AGAINST ACCESS TO LIVE PART- test probe B")	-	1000	-
Clause No - 8.1.2("PROTECTION AGAINST ACCESS TO LIVE PART - test probe 13")	-	2000	-
Clause No - 8.2(Addition)	-	2000	-
Clause No - 10.1, Table No. -1(power input deviation)	-	2000	-
Clause No - 13.3("LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE")	-	2000	-
Clause No - 13.3,Table No.- 4(voltage for electrical strength)	-	2000	-
Clause No - 14(Impulse test voltage)	-	3000	-
Clause No - 15.1.1(MOISTURE RESISTANCE)	-	3000	-
Clause No -19.7(test is repeated with the capacitor short circuited)	-	3000	-
Clause No -19.11.4.4(Voltage dips and interruption)	-	3000	-
Clause No -21.1(Mechanical strength)	-	3000	-
Clause No -22.1(construction)	-	2000	-
Clause No -22.11(push force applied)	-	1500	-
Clause No -25.8, Table no -11(conductor resistance)	-	2000	-
Clause No -25.5(dimension for pins)	-	2000	-
Clause No -27.6(for circuit board)	-	2000	-
Clause No -29.2(comparative tracking index)	-	3000	-
Clause No -29.3.3(dry heat test)	-	5000	-
Clause No -30.2.1(glow wire test)	-	3000	-
Clause No -30.101("incorporate combustible material")	-	5000	-
15(MOISTURE RESISTANCE)	-	4000	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	2000	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	2000	-
18(ENDURANCE)	-	1000	-
28(SCREWS AND CONNECTIONS)	-	2000	-
31(RESISTANCE TO RUSTING)	-	2000	-
22(CONSTRUCTION)	-	2000	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	2000	-
11(Heating)	-	3000	-
Clause No - 5(GENERAL CONDITIONS FOR THE TESTS)	-	1000	-
Clause No - 5.18(linear and angular dimension)	-	3500	-
Clause No - 6.2(harmfull ingress of water)	-	3500	-
Clause No - 8.1.1("PROTECTION AGAINST ACCESS TO LIVE PART- test probe B")	-	3500	-
Clause No - 8.1.2("PROTECTION AGAINST ACCESS TO LIVE PART - test probe 13")	-	3500	-
Clause No - 8.2(Addition)	-	2500	-
Clause No - 10.1, Table No. -1(power input deviation)	-	3500	-
Clause No - 13.3("LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE")	-	3500	-
Clause No - 13.3,Table No.- 4(voltage for electrical strength)	-	3500	-
Clause No - 14(Impulse test voltage)	-	4500	-
Clause No - 15.1.1(MOISTURE RESISTANCE)	-	6000	-
Clause No -19.7(test is repeated with the capacitor short circuited)	-	3500	-
Clause No -19.11.4.4(Voltage dips and interruption)	-	3500	-
Clause No -21.1(Mechanical strength)	-	3500	-
Clause No -22.1(construction)	-	3500	-
Clause No -22.11(push force applied)	-	3500	-
Clause No -25.8, Table no -11(conductor resistance)	-	3500	-
Clause No -25.5(dimension for pins)	-	3500	-
Clause No -27.6(for circuit board)	-	3500	-
Clause No -29.2(comparative tracking index)	-	3500	-
Clause No -29.3.3(dry heat test)	-	4000	-
Clause No -30.2.1(glow wire test)	-	3500	-
Clause No -30.101("incorporate combustible material")	-	3500	-
15(MOISTURE RESISTANCE)	-	6000	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	3500	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	3500	-
18(ENDURANCE)	-	4000	-
28(SCREWS AND CONNECTIONS)	-	3500	-
31(RESISTANCE TO RUSTING)	-	3500	-
22(CONSTRUCTION)	-	3500	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	3500	-
11(Heating)	-	4000	-

11 Mar, 2027

-
Included w.e.f 28.01.2026 Exclusion: Cl 19.11.4.1 (Electrostatic discharges), 19.11.4.2 (Radiated fields), 19.11.4.3 (Fast transient bursts), 19.11.4.5 (Immunity to conducted discharges), 19.11.4.6 (Class 3 Voltage dips and interruptions), 19.11.4.7 (Harmonics), 24.0 (Components), 32.2 (Radiation ,Toxicity and similar hazards)

IS 302 : Part 2 : Sec 30 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 30 room heaters (First Revision)

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 (Classification)	-	1000	-
Cl.6 (Classification)	-	1000	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7(Marking and Instructions)	-	2000	-
Cl.7(Marking and Instructions)	-	2000	-
Cl.7(Marking and Instructions)	-	2000	-
Cl.7.3(Marking and Instructions)	-	2000	-
Cl.7.3(Marking and Instructions)	-	2000	-
Cl.7.3(Marking and Instructions)	-	2000	-
Cl.7.4(Marking and Instructions)	-	2000	-
Cl.7.5(Marking and Instructions)	-	2000	-
Cl.7.6 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.8 of IS :302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.9 of IS :302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.10 of IS :302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.11 of IS :302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.12.1 & IS:302-1:2009(Marking and Instructions)	-	2000	-
Cl.7.13 of IS 302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.14 of IS302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.14(Marking and Instructions)	-	2000	-
Cl.7.14(Marking and Instructions)	-	2000	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	2000	-
Cl.7.101(Marking and Instructions)	-	2000	-
Cl.8 & IS:302-1:2008(Protection Against Access to Live Parts)	-	3000	-
Cl.10 & IS:302-1:2008(Power Input and Current)	-	3000	-
Cl.11 & IS:302-1:2008(Heating)	-	3000	-
Cl.11 & IS:302-1:2008(Heating)	-	3000	-
Cl.11 & IS:302-1:2008(Heating)	-	3000	-
Cl.11 & IS:302-1:2008(Heating)	-	3000	-
Cl.11 & IS:302-1:2008(Heating)	-	3000	-
Cl.11 & IS:302-1:2008(Heating)	-	3000	-
Cl.11 & IS:302-1:2008(Heating)	-	3000	-
Cl.11 & IS:302-1:2008(Heating)	-	3000	-
Cl.11 & IS:302-1:2008(Heating)	-	3000	-
Cl.11 & IS:302-1:2008(Heating)	-	3000	-
Cl.11 & IS:302-1:2008(Heating)	-	3000	-
Cl.11 & IS:302-1:2008(Heating)	-	3000	-
Cl.11 & IS:302-1:2008(Heating)	-	3000	-
Cl.11 & IS:302-1:2008(Heating)	-	3000	-
Cl.11 & IS:302-1:2008(Heating)	-	3000	-
Cl.11 & IS:302-1:2008(Heating)	-	3000	-
Cl.11.8(Heating)	-	3000	-
Cl.11.8(Heating)	-	3000	-
Cl.11.8(Heating)	-	3000	-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	3000	-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	3000	-
Cl.14 & IS:302-1:2008(Transient Over Voltages)	-	3000	-
Cl.15 & IS: 302-1:2008(Moisture Resistance )	-	3000	-
Cl.15.3 of IS 302-1:200(Moisture Resistance )	-	3000	-
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	2000	-
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	2000	-
Cl.17 & IS:302-1:2008(Over load Protection of Transformers and Associated Circuits )	-	2000	-
Cl.18 (Endurance. )	-	500	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	3000	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	3000	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	3000	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	3000	-
Cl.19.101(Abnormal Operation.)	-	3000	-
Cl.19.102(Abnormal Operation.)	-	3000	-
Cl.19.103(Abnormal Operation.)	-	3000	-
Cl.19.104(Abnormal Operation.)	-	3000	-
Cl.19.105(Abnormal Operation.)	-	3000	-
Cl.19.106(Abnormal Operation.)	-	3000	-
Table 8 of IS 302-1:2008(Abnormal Operation.)	-	3000	-
Cl.19.107(Abnormal Operation.)	-	3000	-
Cl.19.108(Abnormal Operation.)	-	3000	-
Cl.19.109(Abnormal Operation.)	-	3000	-
Cl.19.110(Abnormal Operation.)	-	3000	-
Cl.19.111(Abnormal Operation.)	-	3000	-
Cl.19.112(Abnormal Operation.)	-	3000	-
Cl.19.113(Abnormal Operation.)	-	3000	-
Cl.19.114(Abnormal Operation.)	-	3000	-
Cl.20 & IS:302-1:2008(Stability & Mechanical Hazards)	-	2000	-
Cl.21 & IS:302-1:2008)(Mechanical Strength.)	-	2000	-
Cl.21.2 of IS 302-1:2008(Mechanical Strength.)	-	2000	-
Cl.21.101 (Mechanical Strength.)	-	2000	-
Cl.21.102(Mechanical Strength.)	-	2000	-
Cl.21.103(Mechanical Strength.)	-	2000	-
Cl.22.1 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.5 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.6 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.7 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.8 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.9 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.11(Construction)	-	2000	-
Cl.22.12 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.13 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.14 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.15 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.18 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.20 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.21 of IS 302-1:2008(Construction)	-	2000	-
Cl.23 & IS:302-1:2008(Internal Wiring )	-	2000	-
Cl.23.4 & Cl.29 of 302-1:2008(Internal Wiring )	-	2000	-
Cl.23.5 of 302-1:2008(Internal Wiring )	-	2000	-
Cl.23.7 of 302-1:2008(Internal Wiring )	-	2000	-
C.23.7 of 302-1:2008(Internal Wiring )	-	2000	-
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords )	-	2000	-
Cl. 25.2 of IS 3021:2008(Supply Connection and External Flexible Cords )	-	2000	-
Cl. 25.3 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	2000	-
Cl. 25.4 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	2000	-
Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords )	-	2000	-
Cl.25.6 of 302-1:2008(Supply Connection and External Flexible Cords )	-	2000	-
Cl.25.7.(Supply Connection and External Flexible Cords )	-	2000	-
Cl.25.8(Supply Connection and External Flexible Cords )	-	2000	-
Cl. 25.9(Supply Connection and External Flexible Cords )	-	2000	-
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords )	-	2000	-
Cl. 25.11(Supply Connection and External Flexible Cords )	-	2000	-
Cl. 25.12(Supply Connection and External Flexible Cords )	-	2000	-
Cl. 25.13(Supply Connection and External Flexible Cords )	-	2000	-
Cl.25.14 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	2000	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	2000	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	2000	-
Cl.25.17 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	2000	-
Cl.25.18(Supply Connection and External Flexible Cords )	-	2000	-
Cl.25.20(Supply Connection and External Flexible Cords )	-	2000	-
Cl.26.1 of IS 302-1:2008(Terminal for External Conductors )	-	2000	-
Cl.26.10 of IS 302-1:2008(Terminal for External Conductors )	-	2000	-
Cl.26.11 of IS 302-1:2008(Terminal for External Conductors )	-	2000	-
Cl.27.1 of 302-1:2008(Provision for Earthing.)	-	3000	-
Cl.27.5 of 302-1:2008(Provision for Earthing.)	-	3000	-
Cl.28 of 302-1:2008(Screws and Connections.)	-	2000	-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	2000	-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	2000	-
Cl.30 & IS:302-1:2008(Resistance to Heat and Fire)	-	3000	-
Cl.30.2.2 of 302-1:2008(Resistance to Heat and Fire)	-	3000	-
Cl.31 & IS:302-1:2008(Resistance to Rusting.)	-	3000	-
Cl.32 & IS:302-1:2008(Radition,Toxicity and similar Hazards.)	-	3000	-
Cl.31 of IS:302-1:2008(Resistance to Rusting.)	-	3000	-
Cl.30.2 of 302-1:2008(Resistance to Heat and Fire : Resistance to fire)	-	3000	-
Cl.30.1 of IS:302-1:2008(Resistance to Heat and Fire: Resistance to heat. )	-	3000	-
Cl.29.2 of IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage Distance)	-	2000	-
Cl.29.1 of IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance )	-	2000	-
Cl.28 of 302-1:2008(Screws and Connections.)	-	2000	-
Cl.27.5 of 302-1:2008(Provision for Earthing : ECR)	-	3000	-
Cl.27.1 of 302-1:2008(Provision for Earthing )	-	3000	-
Cl.26 of IS 302-1:2008(Terminal for External Conductors )	-	2000	-
Cl.25.20 of 302-1:2008(Supply Connection and External Flexible Cords : Additional insulation )	-	2000	-
Cl.25.18 of 302-1:2008(Supply Connection and External Flexible Cords : Arrangement of cord anchorages )	-	2000	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords : Cord grip test - displacement)	-	2000	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords : Cord grip test - strain at terminals )	-	2000	-
Cl. 25.13 of 302-1:2008(Supply Connection and External Flexible Cords : Inlet opening of supply cords )	-	2000	-
Cl. 25.12 of 302-1:2008(Supply Connection and External Flexible Cords : Moulding of cords )	-	2000	-
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords : Colour of earthing wire )	-	2000	-
Cl. 25.9 of 302-1:2008(Supply Connection and External Flexible Cords : Contact with sharp edge )	-	2000	-
Cl.25.8 of 302-1:2008(Supply Connection and External Flexible Cords : Resistance of supply wires )	-	2000	-
Cl.25.7 of IS:302-2-30:2007(Supply Connection and External Flexible Cords : Supply cords material )	-	2000	-
Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords : Type of attachments )	-	2000	-
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords : Means of connection )	-	2000	-
Cl.23.7 of 302-1:2008(Internal Wiring : Colour of earting conductor )	-	2000	-
Cl.23 of IS:302-1:2008(Internal Wiring )	-	2000	-
Cl.22.106 of IS:302-2-30:2007(Construction : Checking of thermostats, timers or similar means for visibl glowing radiant heaters)	-	2000	-
Cl.22.106 of IS:302-2-30:2007(Construction : Checking of openings on the underside)	-	2000	-
Cl.22.102 & Cl 22.103 of IS:302-2-30:2007(Construction : Fireguard )	-	2000	-
Cl.22.101 of IS:302-2-30:2007(Construction : Prevention to contact with heating element)	-	2000	-
Cl.22.24 of IS:302-2-30:2007(Construction : test of bare heating element)	-	2000	-
Cl.22.18 of IS 302-1:2008(Construction : Resistance to corrosion )	-	2000	-
Cl.22.15 of IS 302-1:2008(Construction : Storage hooks for flexible cords)	-	2000	-
Cl.22.14 of IS 302-1:2008(Construction : ragged and sharp edges)	-	2000	-
Cl.22.13 of IS 302-1:2008(Construction : Position of handles )	-	2000	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knobs,grips,lever and similer parts )	-	2000	-
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable parts )	-	2000	-
Cl.22.7 of IS:302-2-30:2007(Construction : Pressure test of oil heater )	-	2000	-
Cl.21.101 of IS:302-2-30:2007(Mechanical Strength : fire gaurd deformation test )	-	2000	-
Cl.21.2 of IS 302-1:2008(Mechanical Strength : Pentration by sharp implementation )	-	2000	-
Cl.21.1 of IS:302-1:2008)(Mechanical Strength : Rough handling )	-	2000	-
Cl.20 of IS:302-2-30:2007(Stability of Mechanical Hazards)	-	2000	-
Cl.19.114 of IS:302-2-30:2007(Abnormal Operation : the temp. of the surface of the container for oil heaters )	-	2000	-
Cl.19.112 of IS:302-2-30:2007(Abnormal Operation : Ignition of bleached cotton gauge)	-	2000	-
Cl.19.111 of IS:302-2-30:2007(Abnormal Operation : Ignition of flannelette for Visibly glowing heaters)	-	2000	-
Cl.19.110 of IS:302-2-30:2007(Abnormal Operation : operation against wall for visibly glowing radiant heaters )	-	2000	-
Cl.19.109 of IS:302-2-30:2007(Abnormal Operation : operation against wall for fan heater )	-	2000	-
Cl.19.106 of IS:302-2-30:2007(Abnormal Operation : Locked rotor of fan hetear )	-	2000	-
Cl.19.103 , Cl 19.104 of IS:302-2-30:2007(Abnormal Operation : Operation after Covering by cotton)	-	2000	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : High Voltage )	-	2000	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : temp rise of supply cord )	-	2000	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : Temp rise of test corner )	-	2000	-
Cl.19 of IS:302-1:2008(Abnormal Operation : Emission of molten or poisonous or ignitable gas)	-	2000	-
Cl.16 of IS:302-1:2008(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	2000	-
Cl.16 of IS:302-1:2008(Leakage current and Electric strength (After humidity): Leakage current )	-	2000	-
Cl.15 of IS 302-1:2008(Moisture Resistance )	-	3000	-
Cl.14 of IS:302-1:2008(Transient Over Voltages)	-	3000	-
Cl.13 of IS:302-1:2008(Leakage Current of Electric Strength at operating temp. )	-	2000	-
Cl.13 of IS:302-1:2008(Leakage Current of Electric Strength at operating temp. )	-	2000	-
Cl.11 of IS:302-2:30: 2007(Heating : Room temperature)	-	3000	-
Cl.11.8 of IS:302-2:30: 2007(Heating : For liquid filled radiators the temp. rise of the outer surface of the liquid container)	-	3000	-
Cl.11 of IS:302-2:30: 2007(Heating : Temperature rise in winding)	-	3000	-
Cl.11 of IS:302-2:30: 2007(Heating : Air-outlet grills)	-	3000	-
Cl.11 of IS:302-2:30: 2007(Heating : Surfaces of handles, knobs, grips and similar parts)	-	3000	-
Cl.11 of IS:302-2:30: 2007(Heating : Wooden supports, walls, ceiling and floor of the test corner)	-	3000	-
Cl.11 of IS:302-2:30: 2007(Heating : PVC Insulation )	-	3000	-
Cl.10 of IS:302-1:2008(Power Input and Current)	-	3000	-
Cl.8 of IS:302-1:2008(Protection Against Access to Live Parts)	-	3000	-
Cl.7.101 of IS:302-2:30: 2007(Marking and Instructions : standard mark. )	-	2000	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions : Visibility of marking concerning covering)	-	2000	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions : discernibility from the out side )	-	2000	-
Cl.7.14 of IS:302-2:30: 2007(Marking and Instructions : Height of “Do not cover”)	-	2000	-
Cl.7.14 of IS:302-2:30: 2007(Marking and Instructions : height of symbol)	-	2000	-
Cl.7.14 of IS302-1:2008(Marking and Instructions : Legibility and durability )	-	2000	-
Cl.7.13 of IS 302-1:2008(Marking and Instructions : Languge of instruction and texts )	-	2000	-
Cl.7.11 of IS :302-1:2008(Marking and Instructions : Controls )	-	2000	-
Cl.7.9 of IS :302-1:2008(Marking and Instructions : switches )	-	2000	-
Cl.7.8 of IS :302-1:2008(Marking and Instructions : terminals )	-	2000	-
Cl.7.6 of IS:302-1:2008(Marking and Instructions : Symbols )	-	2000	-
Cl.7.5 of IS:302-1:2008(Marking and Instructions : upper of lower limit of the rated power input )	-	2000	-
Cl 7.1 & Cl.7.6 of IS:302-2:30: 2007(Marking and Instructions : Do not cover )	-	2000	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Country of manufacture )	-	2000	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Symbol for Class-II )	-	2000	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Model or type )	-	2000	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Name , trade-mark or identification mark of the manufacturer )	-	2000	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : rated power input )	-	2000	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Nature of supply )	-	2000	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Rated Voltage )	-	2000	-
19.11.4.4(Surge immunity test)	-	4000	-
Cl.6 (Classification)	-	1000	-
Cl.6 (Classification)	-	1000	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7(Marking and Instructions)	-	1000	-
Cl.7(Marking and Instructions)	-	1000	-
Cl.7(Marking and Instructions)	-	1000	-
Cl.7.3(Marking and Instructions)	-	1000	-
Cl.7.3(Marking and Instructions)	-	1000	-
Cl.7.3(Marking and Instructions)	-	1000	-
Cl.7.4(Marking and Instructions)	-	1000	-
Cl.7.5(Marking and Instructions)	-	1000	-
Cl.7.6 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.8 of IS :302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.9 of IS :302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.10 of IS :302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.11 of IS :302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12.1 & IS:302-1:2009(Marking and Instructions)	-	1000	-
Cl.7.13 of IS 302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.14 of IS302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.14(Marking and Instructions)	-	1000	-
Cl.7.14(Marking and Instructions)	-	1000	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.101(Marking and Instructions)	-	1000	-
Cl.8 & IS:302-1:2008(Protection Against Access to Live Parts)	-	3500	-
Cl.10 & IS:302-1:2008(Power Input and Current)	-	3500	-
Cl.11 & IS:302-1:2008(Heating)	-	4000	-
Cl.11 & IS:302-1:2008(Heating)	-	4000	-
Cl.11 & IS:302-1:2008(Heating)	-	4000	-
Cl.11 & IS:302-1:2008(Heating)	-	4000	-
Cl.11 & IS:302-1:2008(Heating)	-	4000	-
Cl.11 & IS:302-1:2008(Heating)	-	4000	-
Cl.11 & IS:302-1:2008(Heating)	-	4000	-
Cl.11 & IS:302-1:2008(Heating)	-	4000	-
Cl.11 & IS:302-1:2008(Heating)	-	4000	-
Cl.11 & IS:302-1:2008(Heating)	-	4000	-
Cl.11 & IS:302-1:2008(Heating)	-	4000	-
Cl.11 & IS:302-1:2008(Heating)	-	4000	-
Cl.11 & IS:302-1:2008(Heating)	-	4000	-
Cl.11 & IS:302-1:2008(Heating)	-	4000	-
Cl.11 & IS:302-1:2008(Heating)	-	4000	-
Cl.11 & IS:302-1:2008(Heating)	-	4000	-
Cl.11.8(Heating)	-	4000	-
Cl.11.8(Heating)	-	4000	-
Cl.11.8(Heating)	-	4000	-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	3500	-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	3500	-
Cl.14 & IS:302-1:2008(Transient Over Voltages)	-	3500	-
Cl.15 & IS: 302-1:2008(Moisture Resistance )	-	6000	-
Cl.15.3 of IS 302-1:200(Moisture Resistance )	-	6000	-
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	3500	-
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	3500	-
Cl.17 & IS:302-1:2008(Over load Protection of Transformers and Associated Circuits )	-	3500	-
Cl.18 (Endurance. )	-	4500	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	3500	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	3500	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	3500	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	3500	-
Cl.19.101(Abnormal Operation.)	-	3500	-
Cl.19.102(Abnormal Operation.)	-	3500	-
Cl.19.103(Abnormal Operation.)	-	3500	-
Cl.19.104(Abnormal Operation.)	-	3500	-
Cl.19.105(Abnormal Operation.)	-	3500	-
Cl.19.106(Abnormal Operation.)	-	3500	-
Table 8 of IS 302-1:2008(Abnormal Operation.)	-	3500	-
Cl.19.107(Abnormal Operation.)	-	3500	-
Cl.19.108(Abnormal Operation.)	-	3500	-
Cl.19.109(Abnormal Operation.)	-	3500	-
Cl.19.110(Abnormal Operation.)	-	3500	-
Cl.19.111(Abnormal Operation.)	-	3500	-
Cl.19.112(Abnormal Operation.)	-	3500	-
Cl.19.113(Abnormal Operation.)	-	3500	-
Cl.19.114(Abnormal Operation.)	-	3500	-
Cl.20 & IS:302-1:2008(Stability & Mechanical Hazards)	-	3500	-
Cl.21 & IS:302-1:2008)(Mechanical Strength.)	-	3500	-
Cl.21.2 of IS 302-1:2008(Mechanical Strength.)	-	3500	-
Cl.21.101 (Mechanical Strength.)	-	3500	-
Cl.21.102(Mechanical Strength.)	-	3500	-
Cl.21.103(Mechanical Strength.)	-	3500	-
Cl.22.1 of IS 302-1:2008(Construction)	-	3500	-
Cl.22.5 of IS 302-1:2008(Construction)	-	3500	-
Cl.22.6 of IS 302-1:2008(Construction)	-	3500	-
Cl.22.7 of IS 302-1:2008(Construction)	-	3500	-
Cl.22.8 of IS 302-1:2008(Construction)	-	3500	-
Cl.22.9 of IS 302-1:2008(Construction)	-	3500	-
Cl.22.11(Construction)	-	3500	-
Cl.22.12 of IS 302-1:2008(Construction)	-	3500	-
Cl.22.13 of IS 302-1:2008(Construction)	-	3500	-
Cl.22.14 of IS 302-1:2008(Construction)	-	3500	-
Cl.22.15 of IS 302-1:2008(Construction)	-	3500	-
Cl.22.18 of IS 302-1:2008(Construction)	-	3500	-
Cl.22.20 of IS 302-1:2008(Construction)	-	3500	-
Cl.22.21 of IS 302-1:2008(Construction)	-	3500	-
Cl.23 & IS:302-1:2008(Internal Wiring )	-	2500	-
Cl.23.4 & Cl.29 of 302-1:2008(Internal Wiring )	-	2500	-
Cl.23.5 of 302-1:2008(Internal Wiring )	-	2500	-
Cl.23.7 of 302-1:2008(Internal Wiring )	-	2500	-
C.23.7 of 302-1:2008(Internal Wiring )	-	2500	-
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords )	-	3500	-
Cl. 25.2 of IS 3021:2008(Supply Connection and External Flexible Cords )	-	3500	-
Cl. 25.3 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	3500	-
Cl. 25.4 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	3500	-
Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords )	-	3500	-
Cl.25.6 of 302-1:2008(Supply Connection and External Flexible Cords )	-	3500	-
Cl.25.7.(Supply Connection and External Flexible Cords )	-	3500	-
Cl.25.8(Supply Connection and External Flexible Cords )	-	3500	-
Cl. 25.9(Supply Connection and External Flexible Cords )	-	3500	-
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords )	-	3500	-
Cl. 25.11(Supply Connection and External Flexible Cords )	-	3500	-
Cl. 25.12(Supply Connection and External Flexible Cords )	-	3500	-
Cl. 25.13(Supply Connection and External Flexible Cords )	-	3500	-
Cl.25.14 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	3500	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	3500	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	3500	-
Cl.25.17 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	3500	-
Cl.25.18(Supply Connection and External Flexible Cords )	-	3500	-
Cl.25.20(Supply Connection and External Flexible Cords )	-	3500	-
Cl.26.1 of IS 302-1:2008(Terminal for External Conductors )	-	3500	-
Cl.26.10 of IS 302-1:2008(Terminal for External Conductors )	-	3500	-
Cl.26.11 of IS 302-1:2008(Terminal for External Conductors )	-	3500	-
Cl.27.1 of 302-1:2008(Provision for Earthing.)	-	3500	-
Cl.27.5 of 302-1:2008(Provision for Earthing.)	-	3500	-
Cl.28 of 302-1:2008(Screws and Connections.)	-	3500	-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	3500	-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	3500	-
Cl.30 & IS:302-1:2008(Resistance to Heat and Fire)	-	3500	-
Cl.30.2.2 of 302-1:2008(Resistance to Heat and Fire)	-	3500	-
Cl.31 & IS:302-1:2008(Resistance to Rusting.)	-	3500	-
Cl.32 & IS:302-1:2008(Radition,Toxicity and similar Hazards.)	-	3500	-
19.11.4.4(Surge immunity test)	-	3500	-

11 Mar, 2027

-
Included w.e.f 28.01.2026 Exclusion: Cl 19.11.4.1 (Electrostatic discharges), 19.11.4.2 (Radiated fields), 19.11.4.3 (Fast transient bursts), 19.11.4.5 (Immunity to conducted discharges), 19.11.4.6 (Class 3 Voltage dips and interruptions), 19.11.4.7 (Harmonics), 24.0 (Components), 32.2 (Radiation ,Toxicity and similar hazards)

IS 302 : Part 2 : Sec 23 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 23 appliances for skin or hair care (First Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
32(Radiation ,Toxicity and similar hazards)	-	2500	-
31(Resistance to Rusting)	-	3000	-
30(Resistance to Heat & Fire)	-	3500	-
29(Clearances, Creepage Distances & Solid Insulation)	-	2000	-
28(Screws & Connection)	-	2000	-
27(Provision For Earthing)	-	2500	-
26(Terminals For External Conductors)	-	2000	-
25(Supply Connection & External Flexible Cables and Cords)	-	2000	-
23(Internal wiring)	-	2500	-
22(Construction)	-	2500	-
21(Mechanical strength)	-	2500	-
20(Stability & Mechanical Hazards)	-	2500	-
19(Abnormal Operation)	-	3500	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	2500	-
16(Leakage Current and Electric Strength)	-	3500	-
15(Moisture Resistance)	-	5000	-
14(Transient Over Voltage)	-	2500	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	3000	-
11(Temperature Rise/Heating)	-	5000	-
10(Power Input & Current)	-	3000	-
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	2000	-
7(Marking/ Marking & Instructions)	-	2000	-
6(Classification)	-	1000	-
19.11.4.4(Surge immunity test)	-	3500	-
18(Endurance)	-	2000	-
9(Starting Of Motor Operated Appliances)	-	2000	-
22.32(CONSTRUCTION)	-	3500	-
32(Radiation ,Toxicity and similar hazards)	-	3500	-
31(Resistance to Rusting)	-	3500	-
30(Resistance to Heat & Fire)	-	3500	-
29(Clearances, Creepage Distances & Solid Insulation)	-	3500	-
28(Screws & Connection)	-	2500	-
27(Provision For Earthing)	-	3500	-
26(Terminals For External Conductors)	-	3500	-
25(Supply Connection & External Flexible Cables and Cords)	-	3500	-
23(Internal wiring)	-	2500	-
22(Construction)	-	3500	-
21(Mechanical strength)	-	3500	-
20(Stability & Mechanical Hazards)	-	3500	-
19(Abnormal Operation)	-	3500	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	3500	-
16(Leakage Current and Electric Strength)	-	3500	-
15(Moisture Resistance)	-	6000	-
14(Transient Over Voltage)	-	3500	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	3500	-
11(Temperature Rise/Heating)	-	4000	-
10(Power Input & Current)	-	4000	-
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	3500	-
7(Marking/ Marking & Instructions)	-	1000	-
6(Classification)	-	1000	-
18(Endurance)	-	4000	-
9(Starting Of Motor Operated Appliances)	-	3500	-
19.11.4.4(Surge immunity test)	-	4000	-

11 Mar, 2027

-
Included w.e.f 28.01.2026 Exclusion: Cl 19.11.4.1 (Electrostatic discharges), 19.11.4.2 (Radiated fields), 19.11.4.3 (Fast transient bursts), 19.11.4.5 (Immunity to conducted discharges), 19.11.4.6 (Class 3 Voltage dips and interruptions), 19.11.4.7 (Harmonics), 24.0 (Components), 22.32 (CONSTRUCTION), 32.2 (Radiation ,Toxicity and similar hazards)

IS 302 : Part 2 : Sec 14 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 14 electric kitchen machines (First Revision)

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	1000	-
6(Classification- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.3(Marking- IS 302-1)	-	2000	-
7.4(Marking- IS 302-1)	-	2000	-
7.6(Marking- IS 302-1)	-	2000	-
7.7(Marking- IS 302-1)	-	2000	-
7.8(Marking- IS 302-1)	-	2000	-
7.11(Marking- IS 302-1)	-	2000	-
7.12(Marking- IS 302-1)	-	2000	-
7.13(Marking- IS 302-1)	-	2000	-
7.14(Marking- IS 302-1)	-	2000	-
7.15(Marking- IS 302-1)	-	2000	-
7.101(Marking)	-	2000	-
8( Protection Against Electric Shock, IS 302-1)	-	2000	-
10(Power Input and Current, IS 302-1)	-	3000	-
11(Heating, IS 302-1)	-	5000	-
11(Heating, IS 302-1)	-	5000	-
11(Heating, IS 302-1)	-	5000	-
11(Heating, IS 302-1)	-	5000	-
11(Heating, IS 302-1)	-	5000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	2500	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	2500	-
14(Transient Over Voltages, IS 302-1)	-	3500	-
15.1(Moisture Resistance, IS 302-1)	-	5000	-
15.2(Moisture Resistance, IS 302-1)	-	5000	-
15(Moisture Resistance, IS 302-1)	-	5000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	2000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	2000	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	2000	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	2000	-
19.7(Abnormal Operation, IS 302-1)	-	3500	-
19.8(Abnormal Operation, IS 302-1)	-	3500	-
19.9(Abnormal Operation, IS 302-1)	-	3500	-
19.1(Abnormal Operation, IS 302-1)	-	3500	-
19.101(Abnormal Operation)	-	3500	-
19.102(Abnormal Operation)	-	3500	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	2500	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	2500	-
20.101(Stability & Mechanical Hazards)	-	2500	-
20.102(Stability & Mechanical Hazards)	-	2500	-
20.103(Stability & Mechanical Hazards)	-	2500	-
20.104(Stability & Mechanical Hazards)	-	2500	-
20.105(Stability & Mechanical Hazards)	-	2500	-
20.106(Stability & Mechanical Hazards)	-	2500	-
20.107(Stability & Mechanical Hazards)	-	2500	-
20.108(Stability & Mechanical Hazards)	-	2500	-
20.109(Stability & Mechanical Hazards)	-	2500	-
20.110(Stability & Mechanical Hazards)	-	2500	-
20.111(Stability & Mechanical Hazards)	-	2500	-
20.112(Stability & Mechanical Hazards)	-	2500	-
20.113(Stability & Mechanical Hazards)	-	2500	-
20.114(Stability & Mechanical Hazards)	-	2500	-
20.115(Stability & Mechanical Hazards)	-	2500	-
20.116(Stability & Mechanical Hazards)	-	2500	-
21.1(Mechanical Strength, IS 302-1)	-	2000	-
21.2(Mechanical Strength, IS 302-1)	-	2000	-
22(Construction, IS 302-1)	-	2500	-
22.101(Construction)	-	2500	-
22.102(Construction)	-	2500	-
23.1(Internal Wiring, IS 302-1)	-	2000	-
23.2(Internal Wiring, IS 302-1)	-	2000	-
23.3(Internal Wiring, IS 302-1)	-	2000	-
23.4(Internal Wiring, IS 302-1)	-	2000	-
23.5(Internal Wiring, IS 302-1)	-	2000	-
23.6(Internal Wiring, IS 302-1)	-	2000	-
23.7(Internal Wiring, IS 302-1)	-	2000	-
23.8(Internal Wiring, IS 302-1)	-	2000	-
23.9(Internal Wiring, IS 302-1)	-	2000	-
23.10(Internal Wiring, IS 302-1)	-	2000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
26(Terminals for External Conductors, IS 302-1)	-	3000	-
27(Provision for Earthing, IS 302-1)	-	2000	-
27.2(Provision for Earthing, IS 302-1)	-	2000	-
27.3(Provision for Earthing, IS 302-1)	-	2000	-
27.4(Provision for Earthing, IS 302-1)	-	2000	-
27.5(Provision for Earthing, IS 302-1)	-	2000	-
28(Screws & Connections, IS 302-1)	-	2000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	2000	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	2000	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	5000	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	5000	-
31(Resistance of Rusting, IS 302-1)	-	2500	-
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	2500	-
19.11.4.4(Surge immunity test)	-	3000	-
4(GENERAL REQUIREMENTS)	-	1000	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	1000	-
27(Provision for Earthing)	-	2000	-
29(Clearances, Creepage distances and Solid Insulation)	-	2000	-
6(Classification- IS 302-1 )	-	1000	-
6(Classification- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.3(Marking- IS 302-1)	-	1000	-
7.4(Marking- IS 302-1)	-	1000	-
7.6(Marking- IS 302-1)	-	1000	-
7.7(Marking- IS 302-1)	-	1000	-
7.8(Marking- IS 302-1)	-	1000	-
7.11(Marking- IS 302-1)	-	1000	-
7.12(Marking- IS 302-1)	-	1000	-
7.13(Marking- IS 302-1)	-	1000	-
7.14(Marking- IS 302-1)	-	1000	-
7.15(Marking- IS 302-1)	-	1000	-
7.101(Marking)	-	1000	-
8( Protection Against Electric Shock, IS 302-1)	-	3500	-
10(Power Input and Current, IS 302-1)	-	3500	-
11(Heating, IS 302-1)	-	4000	-
11(Heating, IS 302-1)	-	4000	-
11(Heating, IS 302-1)	-	4000	-
11(Heating, IS 302-1)	-	4000	-
11(Heating, IS 302-1)	-	4000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	3500	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	3500	-
14(Transient Over Voltages, IS 302-1)	-	3500	-
15.1(Moisture Resistance, IS 302-1)	-	6000	-
15.2(Moisture Resistance, IS 302-1)	-	6000	-
15(Moisture Resistance, IS 302-1)	-	6000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	3500	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	3500	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	3500	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	3500	-
19.7(Abnormal Operation, IS 302-1)	-	3500	-
19.8(Abnormal Operation, IS 302-1)	-	3500	-
19.9(Abnormal Operation, IS 302-1)	-	3500	-
19.1(Abnormal Operation, IS 302-1)	-	3500	-
19.101(Abnormal Operation)	-	3500	-
19.102(Abnormal Operation)	-	3500	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	3500	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	3500	-
20.101(Stability & Mechanical Hazards)	-	3500	-
20.102(Stability & Mechanical Hazards)	-	3500	-
20.103(Stability & Mechanical Hazards)	-	3500	-
20.104(Stability & Mechanical Hazards)	-	3500	-
20.105(Stability & Mechanical Hazards)	-	3500	-
20.106(Stability & Mechanical Hazards)	-	3500	-
20.107(Stability & Mechanical Hazards)	-	3500	-
20.108(Stability & Mechanical Hazards)	-	3500	-
20.109(Stability & Mechanical Hazards)	-	3500	-
20.110(Stability & Mechanical Hazards)	-	3500	-
20.111(Stability & Mechanical Hazards)	-	3500	-
20.112(Stability & Mechanical Hazards)	-	3500	-
20.113(Stability & Mechanical Hazards)	-	3500	-
20.114(Stability & Mechanical Hazards)	-	3500	-
20.115(Stability & Mechanical Hazards)	-	3500	-
20.116(Stability & Mechanical Hazards)	-	3500	-
21.1(Mechanical Strength, IS 302-1)	-	3500	-
21.2(Mechanical Strength, IS 302-1)	-	3500	-
22(Construction, IS 302-1)	-	3500	-
22.101(Construction)	-	3500	-
22.102(Construction)	-	3500	-
23.1(Internal Wiring, IS 302-1)	-	2500	-
23.2(Internal Wiring, IS 302-1)	-	2500	-
23.3(Internal Wiring, IS 302-1)	-	2500	-
23.4(Internal Wiring, IS 302-1)	-	2500	-
23.5(Internal Wiring, IS 302-1)	-	2500	-
23.6(Internal Wiring, IS 302-1)	-	2500	-
23.7(Internal Wiring, IS 302-1)	-	2500	-
23.8(Internal Wiring, IS 302-1)	-	2500	-
23.9(Internal Wiring, IS 302-1)	-	2500	-
23.10(Internal Wiring, IS 302-1)	-	2500	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
26(Terminals for External Conductors, IS 302-1)	-	3500	-
27(Provision for Earthing, IS 302-1)	-	3500	-
27.2(Provision for Earthing, IS 302-1)	-	3500	-
27.3(Provision for Earthing, IS 302-1)	-	3500	-
27.4(Provision for Earthing, IS 302-1)	-	3500	-
27.5(Provision for Earthing, IS 302-1)	-	3500	-
28(Screws & Connections, IS 302-1)	-	3500	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	3500	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	3500	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	3500	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	3500	-
31(Resistance of Rusting, IS 302-1)	-	3500	-
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	3500	-
19.11.4.4(Surge immunity test)	-	4000	-
4(GENERAL REQUIREMENTS)	-	1000	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	1000	-
27(Provision for Earthing)	-	3500	-
29(Clearances, Creepage distances and Solid Insulation)	-	3500	-

11 Mar, 2027

-
Included w.e.f 28.01.2026 Exclusion: Cl 19.11.4.1 (Electrostatic discharges), 19.11.4.2 (Radiated fields), 19.11.4.3 (Fast transient bursts), 19.11.4.5 (Immunity to conducted discharges), 19.11.4.6 (Class 3 Voltage dips and interruptions), 19.11.4.7 (Harmonics), 24.0 (Components), 32.2 (Radiation ,Toxicity and similar hazards)

IS 302 : Part 2 : Sec 9 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 9 toasters, grills, roasters and similar appliances (First Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.32(Verification)	-	2000	-
Cl.31(Verification)	-	2000	-
Cl.30(Verification)	-	2000	-
CL.29(Verification)	-	2000	-
Cl.28(Verification)	-	2000	-
Cl.27(Verification)	-	2000	-
Cl.26(Verification)	-	2000	-
Cl.25(Verification)	-	3000	-
Cl.23(Verification)	-	2000	-
Cl.22(Verification)	-	2000	-
Cl.21(Verification)	-	2000	-
Cl.20(Verification)	-	3000	-
Cl.19(Verification)	-	3500	-
Cl. 16(Verification)	-	2500	-
Cl.15.1(Moisture Resistance)	-	5000	-
Cl.14(Verification)	-	2000	-
Cl.13(Verification)	-	2500	-
Cl.11(Verification)	-	4500	-
Cl.10(Verification)	-	2500	-
Cl.8(Verification)	-	2000	-
Cl. 7(Verification)	-	2000	-
Cl. 6(Classification- IS 302-1)	-	1000	-
Cl. 32 IS 302-2-9(Radiation, Toxicity and similar hazards)	-	2000	-
Cl. 31 IS 302-2-9(Resistance To Rusting )	-	2000	-
Cl. 30 IS 302-2-9(Resistance To Heat, Fire And Tracking)	-	2000	-
Cl. 29 IS 302-2-9(Creepage Distances, Clearances And Distances Through Insulation)	-	2000	-
Cl. 28 IS 302-2-9(Screws and Connections)	-	2000	-
Cl. 27 IS 302-2-9(Provision For Earthing )	-	2500	-
Cl. 26 IS 302-2-9(Terminal For External Conductors )	-	2000	-
Cl. 25 IS 302-2-9(Supply Connections and External Flexible Cables and Cords )	-	2500	-
Cl. 23 IS 302-2-9(Internal Wiring)	-	2000	-
Cl. 22 IS 302-2-9(Construction )	-	2000	-
Cl. 21 IS 302-2-9(Mechanical Strength)	-	2000	-
Cl. 20 IS 302-2-9(Stability and mechanical Hazards)	-	2000	-
Cl. 19 IS 302-2-9(Abnormal Operation )	-	3500	-
Cl. 18 IS 302-2-9(Endurance)	-	2000	-
Cl. 17 IS 302-2-9(Overload protection of transformers and associated circuits.)	-	3500	-
Cl. 16 IS 302-2-9(Leakage Current and Electric strength )	-	2500	-
Cl. 15 IS 302-2-9(Moisture Resistance)	-	5000	-
Cl. 14 IS 302-2-9(Transient overvoltage)	-	2000	-
Cl. 13.3 IS 302-2-9(Leakage Current & Electric Strength at Operating Temperature)	-	2500	-
Cl. 11 IS 302-2-9(Heating)	-	4500	-
Cl. 10 IS 302-2-9(Power Input and Current )	-	2500	-
Cl. 9 IS 302-2-9(Starting of motor operated appliances)	-	2000	-
Cl. 8 IS 302-2-9(Protection against access to live parts)	-	2000	-
Cl. 7 IS 302-2-9(Marking and Instruction)	-	2000	-
Cl. 6 IS 302-2-9(Classification- IS 302-1)	-	1000	-
32(Radiation, toxicity and similar hazards)	-	2000	-
31(Resistance to rusting)	-	2000	-
31(Resistance to rusting)	-	2000	-
30.2.4(Resistance to heat and fire)	-	2000	-
30.2(Resistance to heat and fire)	-	2000	-
30.1(Resistance to heat and fire)	-	2000	-
29.3(Clearances, creepage distances and solid insulation)	-	2000	-
29.2(Clearances, creepage distances and solid insulation)	-	2000	-
29.2(Clearances, creepage distances and solid insulation)	-	2000	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	2000	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	2000	-
28.2 to 28.4(Screws and connections)	-	2000	-
28.1, Table No.-14(Screws and connections)	-	2000	-
27.6(Provision for earthing)	-	2500	-
27.5(Provision for earthing)	-	2500	-
27.1 to 27.4(Provision for earthing)	-	2500	-
26.10 & 26.11(Terminals for external conductors)	-	2000	-
26.9(Terminals for external conductors)	-	2000	-
26.1 to 26.8(Terminals for external conductors)	-	2000	-
25.16 to 25.25(Supply connection and external flexible cords)	-	2500	-
25.15(Supply connection and external flexible cords)	-	2500	-
25.14(Supply connection and external flexible cords)	-	2500	-
25.14(Supply connection and external flexible cords)	-	2500	-
25.9 to 25.13(Supply connection and external flexible cords)	-	2500	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	2500	-
25.5 to 25.7(Supply connection and external flexible cords)	-	2500	-
25.4(Supply connection and external flexible cords)	-	2500	-
25.3(Supply connection and external flexible cords)	-	2500	-
25.2(Supply connection and external flexible cords)	-	2500	-
25.1(Supply connection and external flexible cords)	-	2500	-
23.6 to 23.10(Internal wiring)	-	2000	-
23.5(Internal wiring)	-	2000	-
23.4(Internal wiring)	-	2000	-
23.3(Internal wiring)	-	2000	-
23.1 & 23.2(Internal wiring)	-	2000	-
22.111(Constructions)	-	2000	-
22.111(Constructions)	-	2000	-
22.11o(Constructions)	-	2000	-
22.109(Constructions)	-	2000	-
22.108(Constructions)	-	2000	-
22.101 to 22.107(Constructions)	-	2000	-
22.13 to 22.48(Constructions)	-	2000	-
22.12(Constructions)	-	2000	-
22.11(Constructions)	-	2000	-
22.11(Constructions)	-	2000	-
22.7 to 22.10(Constructions)	-	2000	-
22.6(Constructions)	-	2000	-
22.5(Constructions)	-	2000	-
22.4(Constructions)	-	2000	-
22.3(Constructions)	-	2000	-
22.2(Constructions)	-	2000	-
22.1(Constructions)	-	2000	-
21.101(MECHANICAL STRENGTH)	-	2000	-
21.101(MECHANICAL STRENGTH)	-	2000	-
21.2(MECHANICAL STRENGTH)	-	2000	-
21.1(MECHANICAL STRENGTH)	-	2000	-
20.2(Stability and mechanical hazards)	-	2000	-
16.1 & 16.2(Leakage current test)	-	2500	-
20.1(Stability and mechanical hazards)	-	2000	-
19.104(ABNORMAL OPERATION)	-	3500	-
19.103(ABNORMAL OPERATION)	-	3500	-
19.102(ABNORMAL OPERATION)	-	3500	-
19.101(ABNORMAL OPERATION)	-	3500	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	3500	-
17(Overload protection of transformers and associated circuits)	-	3500	-
16.3(Insulation resistance test)	-	2500	-
16.3(Electric strength test)	-	2500	-
15.3(Moisture resistance)	-	5000	-
15.3(Moisture resistance)	-	5000	-
15.3(Moisture resistance)	-	5000	-
15.2(Moisture resistance)	-	5000	-
15.2(Moisture resistance)	-	5000	-
15.2(Moisture resistance)	-	5000	-
15.2(Moisture resistance)	-	5000	-
15.1(Moisture resistance)	-	5000	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	2000	-
13.3 and Table No.- 4(Electric strength test)	-	2500	-
13.1, 13.2(Leakage current test)	-	2500	-
13.1, 13.2(Leakage current test)	-	2500	-
11.101(Heating)	-	4500	-
11.1 to 11.8, Table No.-3(Heating)	-	4500	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	2500	-
8.1.5(Protection against access to live parts)	-	2000	-
8.1.4(Protection against access to live parts)	-	2000	-
8.1.3(Protection against access to live parts)	-	2000	-
8.1.2(Protection against access to live parts)	-	2000	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	2000	-
7.14(Legibility & Durability of Markings test)	-	2000	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	2000	-
32(Radiation, toxicity and similar hazards)	-	2000	-
31(Resistance to rusting)	-	2000	-
31(Resistance to rusting)	-	2000	-
30.2.4(Resistance to heat and fire)	-	2000	-
30.2(Resistance to heat and fire)	-	2000	-
30.1(Resistance to heat and fire)	-	2000	-
29.3(Clearances, creepage distances and solid insulation)	-	2000	-
29.2(Clearances, creepage distances and solid insulation)	-	2000	-
29.2(Clearances, creepage distances and solid insulation)	-	2000	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	2000	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	2000	-
28.2 to 28.4(Screws and connections)	-	2000	-
28.1, Table No.-14(Screws and connections)	-	2000	-
27.6(Provision for earthing)	-	2000	-
27.5(Provision for earthing)	-	2500	-
27.1 to 27.4(Provision for earthing)	-	2500	-
26.10 & 26.11(Terminals for external conductors)	-	2000	-
26.9(Terminals for external conductors)	-	2000	-
26.1 to 26.8(Terminals for external conductors)	-	2000	-
25.16 to 25.25(Supply connection and external flexible cords)	-	2500	-
25.15(Supply connection and external flexible cords)	-	2500	-
25.14(Supply connection and external flexible cords)	-	2500	-
25.14(Supply connection and external flexible cords)	-	2500	-
25.9 to 25.13(Supply connection and external flexible cords)	-	2500	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	2500	-
25.5 to 25.7(Supply connection and external flexible cords)	-	2500	-
25.4(Supply connection and external flexible cords)	-	2500	-
25.3(Supply connection and external flexible cords)	-	2500	-
25.2(Supply connection and external flexible cords)	-	2500	-
25.1(Supply connection and external flexible cords)	-	2500	-
23.6 to 23.10(Internal wiring)	-	2000	-
23.5(Internal wiring)	-	2000	-
23.4(Internal wiring)	-	2000	-
23.3(Internal wiring)	-	2000	-
23.1 & 23.2(Internal wiring)	-	2000	-
22.111(Constructions)	-	2000	-
22.111(Constructions)	-	2000	-
22.11o(Constructions)	-	2000	-
22.109(Constructions)	-	2000	-
22.108(Constructions)	-	2000	-
22.101 to 22.107(Constructions)	-	2000	-
22.13 to 22.48(Constructions)	-	2000	-
22.12(Constructions)	-	2000	-
22.11(Constructions)	-	2000	-
22.11(Constructions)	-	2000	-
22.7 to 22.10(Constructions)	-	2000	-
22.6(Constructions)	-	2000	-
22.5(Constructions)	-	2000	-
22.4(Constructions)	-	2000	-
22.3(Constructions)	-	2000	-
22.2(Constructions)	-	2000	-
22.1(Constructions)	-	2000	-
21.101(MECHANICAL STRENGTH)	-	2000	-
21.101(MECHANICAL STRENGTH)	-	2000	-
21.2(MECHANICAL STRENGTH)	-	2000	-
21.1(MECHANICAL STRENGTH)	-	2000	-
20.2(Stability and mechanical hazards)	-	2000	-
20.1(Stability and mechanical hazards)	-	2000	-
19.104(ABNORMAL OPERATION)	-	3500	-
19.103(ABNORMAL OPERATION)	-	3500	-
19.102(ABNORMAL OPERATION)	-	3500	-
19.101(ABNORMAL OPERATION)	-	3500	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	3500	-
17(Overload protection of transformers and associated circuits)	-	2000	-
16.3(Insulation resistance test)	-	2500	-
16.3(Electric strength test)	-	2500	-
16.1 & 16.2(Leakage current test)	-	2500	-
15.3(Moisture resistance)	-	5000	-
15.3(Moisture resistance)	-	5000	-
15.3(Moisture resistance)	-	5000	-
15.2(Moisture resistance)	-	5000	-
15.2(Moisture resistance)	-	5000	-
15.2(Moisture resistance)	-	5000	-
15.2(Moisture resistance)	-	5000	-
15.1(Moisture resistance)	-	5000	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	2000	-
13.3 and Table No.- 4(Electric strength test)	-	2500	-
13.1, 13.2(Leakage current test)	-	2500	-
13.1, 13.2(Leakage current test)	-	2500	-
11.101(Heating)	-	4500	-
11.1 to 11.8, Table No.-3(Heating)	-	4500	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	2500	-
8.1.5(Protection against access to live parts)	-	2000	-
8.1.4(Protection against access to live parts)	-	2000	-
8.1.3(Protection against access to live parts)	-	2000	-
8.1.2(Protection against access to live parts)	-	2000	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	2000	-
7.14(Legibility & Durability of Markings test)	-	2000	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	2000	-
32(Radiation ,Toxicity and similar hazards)	-	2000	-
31(Resistance to Rusting)	-	2000	-
30(Resistance to Heat & Fire)	-	2000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	2000	-
28(Screws & Connections)	-	2000	-
27(Provision For Earthing)	-	2500	-
26(Terminals For External Conductors)	-	2000	-
25(Supply Connection & External Flexible Cords)	-	2500	-
23(Internal wiring)	-	2000	-
22(Construction)	-	2000	-
21(Mechanical strength)	-	2000	-
20(Stability & Mechanical Hazards)	-	2000	-
19(Abnormal Operation)	-	3500	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	2000	-
16(Leakage Current and Electric Strength)	-	2500	-
15(Moisture Resistance)	-	5000	-
14(Transient Over Voltage)	-	2000	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	2500	-
11(Temperature Rise/ Heating)	-	4500	-
10(Power Input & Current)	-	2500	-
9(Starting Of Motor Operated Appliances)	-	2000	-
8(Protection against access to live parts)	-	2000	-
32(Radiation ,Toxicity and similar hazards)	-	2000	-
31(Resistance to Rusting)	-	2000	-
30(Resistance to Heat & Fire)	-	2000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	2000	-
28(Screws & Connections)	-	2000	-
27(Provision For Earthing)	-	2500	-
26(Terminals For External Conductors)	-	2000	-
25(Supply Connection & External Flexible Cords)	-	2500	-
23(Internal wiring)	-	2000	-
22(Construction)	-	2000	-
21(Mechanical strength)	-	2000	-
20(Stability & Mechanical Hazards)	-	2000	-
19(Abnormal Operation)	-	3500	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	2000	-
16(Leakage Current and Electric Strength)	-	2500	-
15(Moisture Resistance)	-	5000	-
14(Transient Over Voltage)	-	2000	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	2500	-
11(Temperature Rise/ Heating)	-	4500	-
10(Power Input & Current)	-	2500	-
9(Starting Of Motor Operated Appliances)	-	2000	-
8(Protection against access to live parts)	-	2000	-
19.11.4.4(Surge immunity test)	-	3500	-
6(Classification- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking, IS 302-2-9)	-	2000	-
7.3(Marking- IS 302-1)	-	2000	-
7.4(Marking- IS 302-1)	-	2000	-
7.5(Marking- IS 302-1)	-	2000	-
7.5(Marking- IS 302-1)	-	2000	-
7.6(Marking- IS 302-1)	-	2000	-
7.7(Marking- IS 302-1)	-	2000	-
7.8(Marking- IS 302-1)	-	2000	-
7.9(Marking- IS 302-1)	-	2000	-
7.1O(Marking- IS 302-1)	-	2000	-
7.11(Marking- IS 302-1)	-	2000	-
7.12(Marking- IS 302-2-9)	-	2000	-
7.13(Marking- IS 302-1)	-	2000	-
7.14(Marking- IS 302-1)	-	2000	-
7.14(Marking- IS 302-2-9)	-	2000	-
7.15(Marking- IS 302-1)	-	2000	-
7.101(Marking- IS 302-2-9)	-	2000	-
8(Protection Against Access To live parts)	-	2000	-
11(Heating, IS 302-1, Table -3)	-	4500	-
11(Heating, IS 302-1, Table -3)	-	4500	-
11(Heating, IS 302-1, Table -3)	-	4500	-
11(Heating, IS 302-1, Table -3)	-	4500	-
11(Heating, IS 302-1, Table -3)	-	4500	-
11(Heating, IS 302-1, Table -3)	-	4500	-
11(Heating, IS 302-1)	-	4500	-
11.101(Heating, IS 302-2-9)	-	4500	-
13.2(Leakage Current And Electrical Strength At Operating Temperature)	-	2500	-
13.3(Leakage Current And Electrical Strength At Operating Temperature)	-	2500	-
14(Trasient Overvoltage)	-	2000	-
15.1(Moisture Resistance)	-	5000	-
15.101(Moisture Resistance)	-	5000	-
16.2(Leakage Current And Electrical Strength At Operating Temperature)	-	2500	-
16.3(Leakage Current And Electrical Strength At Operating Temperature)	-	2500	-
17(Over Load Protection of Transformers and associated circuits)	-	3500	-
19.2(Abnormal Operation, IS 302-1)	-	3500	-
19.3(Abnormal Operation, IS 302-1)	-	3500	-
19.4(Abnormal Operation, IS 302-1)	-	3500	-
19.5(Abnormal Operation, IS 302-1)	-	3500	-
19.6(Abnormal Operation, IS 302-1)	-	3500	-
19.7(Abnormal Operation, IS 302-1)	-	3500	-
19.9(Abnormal Operation, IS 302-1)	-	3500	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	3500	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	3500	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	3500	-
19.17(Abnormal Operation, IS 302-1)	-	3500	-
19.17(Abnormal Operation, IS 302-1)	-	3500	-
19.101(Abnormal Operation , IS 302-2-9)	-	3500	-
19.102(Abnormal Operation , IS 302-2-9)	-	3500	-
19.103(Abnormal Operation , IS 302-2-9)	-	3500	-
19.104(Abnormal Operation , IS 302-2-9)	-	3500	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	2000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	2000	-
20.101(Stability & Mechanical Hazards, IS 302-2-9)	-	2000	-
21.1(Mechanical Strength, IS 302-1)	-	2000	-
21.2(Mechanical Strength, IS 302-1)	-	2000	-
21.3(Mechanical Strength, IS 302-1)	-	2000	-
21.101(Mechanical Strength, IS 302-2-9)	-	2000	-
22(Construction, IS 302-1)	-	2000	-
22.101(Construction, IS 302-2-9)	-	2000	-
22.102(Construction, IS 302-2-9)	-	2000	-
22.103(Construction, IS 302-2-9)	-	2000	-
22.104(Construction, IS 302-2-9)	-	2000	-
22.105(Construction, IS 302-2-9)	-	2000	-
22.106(Construction, IS 302-2-9)	-	2000	-
22.107(Construction, IS 302-2-9)	-	2000	-
22.108(Construction, IS 302-2-9)	-	2000	-
22.109(Construction, IS 302-2-9)	-	2000	-
22.110(Construction, IS 302-2-9)	-	2000	-
22.111(Construction, IS 302-2-9)	-	2000	-
22.112(Construction, IS 302-2-9)	-	2000	-
23.1(Internal Wiring, IS 302-1)	-	2000	-
23.2(Internal Wiring, IS 302-1)	-	2000	-
23.3(Internal Wiring, IS 302-1)	-	2000	-
23.4(Internal Wiring, IS 302-1)	-	2000	-
23.6(Internal Wiring, IS 302-1)	-	2000	-
23.7(Internal Wiring, IS 302-1)	-	2000	-
23.8(Internal Wiring, IS 302-1)	-	2000	-
23.9(Internal Wiring, IS 302-1)	-	2000	-
23.10(Internal Wiring, IS 302-1)	-	2000	-
25.1(Supply connection and external flexible cords, IS 302-2-9)	-	2500	-
25.2(Supply connection and external flexible cords, IS 302-1)	-	2500	-
25.3(Supply connection and external flexible cords, IS 302-1)	-	2500	-
25.4(Supply connection and external flexible cords, IS 302-1)	-	2500	-
25.5(Supply connection and external flexible cords, IS 302-1)	-	2500	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	2500	-
25.7(Supply Connection and External Flexible Cords, IS 302-2-9)	-	2500	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	2500	-
25.9(Supply Connection and External Flexible Cords, IS 302-1)	-	2500	-
25.10(Supply Connection and External Flexible Cords, IS 302-1)	-	2500	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	2500	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	2500	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	2500	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	2500	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	2500	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	2500	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	2500	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	2500	-
25.20(Supply Connection and External Flexible Cords, IS 302-1)	-	2500	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	2500	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	2500	-
25.23(Supply Connection and External Flexible Cords, IS 302-1)	-	2500	-
25.24(Supply Connection and External Flexible Cords, IS 302-1)	-	2500	-
Cl.15.1(Moisture Resistance)	-	3000	-
Cl. 6(Classification- IS 302-1)	-	1000	-
Cl. 32 IS 302-2-9(Radiation, Toxicity and similar hazards)	-	3500	-
Cl. 31 IS 302-2-9(Resistance To Rusting )	-	3500	-
Cl. 30 IS 302-2-9(Resistance To Heat, Fire And Tracking)	-	3500	-
Cl. 29 IS 302-2-9(Creepage Distances, Clearances And Distances Through Insulation)	-	3500	-
Cl. 28 IS 302-2-9(Screws and Connections)	-	3000	-
Cl. 27 IS 302-2-9(Provision For Earthing )	-	3500	-
Cl. 26 IS 302-2-9(Terminal For External Conductors )	-	3000	-
Cl. 25 IS 302-2-9(Supply Connections and External Flexible Cables and Cords )	-	3000	-
Cl. 23 IS 302-2-9(Internal Wiring)	-	3000	-
Cl. 22 IS 302-2-9(Construction )	-	3000	-
Cl. 21 IS 302-2-9(Mechanical Strength)	-	3000	-
Cl. 20 IS 302-2-9(Stability and mechanical Hazards)	-	3000	-
Cl. 19 IS 302-2-9(Abnormal Operation )	-	3500	-
Cl. 18 IS 302-2-9(Endurance)	-	4500	-
Cl. 17 IS 302-2-9(Overload protection of transformers and associated circuits.)	-	3500	-
Cl. 16 IS 302-2-9(Leakage Current and Electric strength )	-	3500	-
Cl. 15 IS 302-2-9(Moisture Resistance)	-	6000	-
Cl. 14 IS 302-2-9(Transient overvoltage)	-	4000	-
Cl. 13.3 IS 302-2-9(Leakage Current & Electric Strength at Operating Temperature)	-	3500	-
Cl. 11 IS 302-2-9(Heating)	-	5000	-
Cl. 10 IS 302-2-9(Power Input and Current )	-	2500	-
Cl. 9 IS 302-2-9(Starting of motor operated appliances)	-	2500	-
Cl. 8 IS 302-2-9(Protection against access to live parts)	-	2500	-
Cl. 7 IS 302-2-9(Marking and Instruction)	-	1000	-
Cl. 6 IS 302-2-9(Classification- IS 302-1)	-	1000	-
32(Radiation, toxicity and similar hazards)	-	3500	-
31(Resistance to rusting)	-	3500	-
31(Resistance to rusting)	-	3500	-
30.2.4(Resistance to heat and fire)	-	3500	-
30.2(Resistance to heat and fire)	-	3500	-
30.1(Resistance to heat and fire)	-	3500	-
29.3(Clearances, creepage distances and solid insulation)	-	3500	-
29.2(Clearances, creepage distances and solid insulation)	-	3500	-
29.2(Clearances, creepage distances and solid insulation)	-	3500	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	3500	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	3500	-
28.2 to 28.4(Screws and connections)	-	3000	-
28.1, Table No.-14(Screws and connections)	-	3000	-
27.6(Provision for earthing)	-	3500	-
27.5(Provision for earthing)	-	3500	-
27.1 to 27.4(Provision for earthing)	-	3500	-
26.10 & 26.11(Terminals for external conductors)	-	3500	-
26.9(Terminals for external conductors)	-	3500	-
26.1 to 26.8(Terminals for external conductors)	-	3500	-
25.16 to 25.25(Supply connection and external flexible cords)	-	3500	-
25.15(Supply connection and external flexible cords)	-	3500	-
25.14(Supply connection and external flexible cords)	-	3500	-
25.14(Supply connection and external flexible cords)	-	3500	-
25.9 to 25.13(Supply connection and external flexible cords)	-	3500	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	3500	-
25.5 to 25.7(Supply connection and external flexible cords)	-	3500	-
25.4(Supply connection and external flexible cords)	-	3500	-
25.3(Supply connection and external flexible cords)	-	3500	-
25.2(Supply connection and external flexible cords)	-	3500	-
25.1(Supply connection and external flexible cords)	-	3500	-
23.6 to 23.10(Internal wiring)	-	2500	-
23.5(Internal wiring)	-	2500	-
23.4(Internal wiring)	-	2500	-
23.3(Internal wiring)	-	2500	-
23.1 & 23.2(Internal wiring)	-	2500	-
22.111(Constructions)	-	3500	-
22.111(Constructions)	-	3500	-
22.11o(Constructions)	-	3500	-
22.109(Constructions)	-	3500	-
22.108(Constructions)	-	3500	-
22.101 to 22.107(Constructions)	-	3500	-
22.13 to 22.48(Constructions)	-	3500	-
22.12(Constructions)	-	3500	-
22.11(Constructions)	-	3500	-
22.11(Constructions)	-	3500	-
22.7 to 22.10(Constructions)	-	3500	-
22.6(Constructions)	-	3500	-
22.5(Constructions)	-	3500	-
22.4(Constructions)	-	3500	-
22.3(Constructions)	-	3500	-
22.2(Constructions)	-	3500	-
22.1(Constructions)	-	3500	-
21.101(MECHANICAL STRENGTH)	-	3000	-
21.101(MECHANICAL STRENGTH)	-	3000	-
21.2(MECHANICAL STRENGTH)	-	3000	-
21.1(MECHANICAL STRENGTH)	-	3000	-
20.2(Stability and mechanical hazards)	-	3500	-
16.1 & 16.2(Leakage current test)	-	4000	-
20.1(Stability and mechanical hazards)	-	3500	-
19.104(ABNORMAL OPERATION)	-	4000	-
19.103(ABNORMAL OPERATION)	-	4000	-
19.102(ABNORMAL OPERATION)	-	4000	-
19.101(ABNORMAL OPERATION)	-	4000	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	4000	-
17(Overload protection of transformers and associated circuits)	-	3500	-
16.3(Insulation resistance test)	-	3500	-
16.3(Electric strength test)	-	3500	-
15.3(Moisture resistance)	-	6000	-
15.3(Moisture resistance)	-	6000	-
15.3(Moisture resistance)	-	6000	-
15.2(Moisture resistance)	-	6000	-
15.2(Moisture resistance)	-	6000	-
15.2(Moisture resistance)	-	6000	-
15.2(Moisture resistance)	-	6000	-
15.1(Moisture resistance)	-	6000	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	3500	-
13.3 and Table No.- 4(Electric strength test)	-	3500	-
13.1, 13.2(Leakage current test)	-	4000	-
13.1, 13.2(Leakage current test)	-	4000	-
11.101(Heating)	-	5000	-
11.1 to 11.8, Table No.-3(Heating)	-	5000	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	3500	-
8.1.5(Protection against access to live parts)	-	2500	-
8.1.4(Protection against access to live parts)	-	2500	-
8.1.3(Protection against access to live parts)	-	2500	-
8.1.2(Protection against access to live parts)	-	2500	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	2500	-
7.14(Legibility & Durability of Markings test)	-	1000	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	1000	-
32(Radiation, toxicity and similar hazards)	-	3500	-
31(Resistance to rusting)	-	3500	-
31(Resistance to rusting)	-	3500	-
30.2.4(Resistance to heat and fire)	-	3500	-
30.2(Resistance to heat and fire)	-	3500	-
30.1(Resistance to heat and fire)	-	3500	-
29.3(Clearances, creepage distances and solid insulation)	-	3500	-
29.2(Clearances, creepage distances and solid insulation)	-	3500	-
29.2(Clearances, creepage distances and solid insulation)	-	3500	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	3500	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	3500	-
28.2 to 28.4(Screws and connections)	-	3500	-
28.1, Table No.-14(Screws and connections)	-	3500	-
27.6(Provision for earthing)	-	3500	-
27.5(Provision for earthing)	-	3500	-
27.1 to 27.4(Provision for earthing)	-	3500	-
26.10 & 26.11(Terminals for external conductors)	-	3500	-
26.9(Terminals for external conductors)	-	3500	-
26.1 to 26.8(Terminals for external conductors)	-	3500	-
25.16 to 25.25(Supply connection and external flexible cords)	-	3500	-
25.15(Supply connection and external flexible cords)	-	3500	-
25.14(Supply connection and external flexible cords)	-	3500	-
25.14(Supply connection and external flexible cords)	-	3500	-
25.9 to 25.13(Supply connection and external flexible cords)	-	3500	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	3500	-
25.5 to 25.7(Supply connection and external flexible cords)	-	3500	-
25.4(Supply connection and external flexible cords)	-	3500	-
25.3(Supply connection and external flexible cords)	-	3500	-
25.2(Supply connection and external flexible cords)	-	3500	-
25.1(Supply connection and external flexible cords)	-	3500	-
23.6 to 23.10(Internal wiring)	-	2500	-
23.5(Internal wiring)	-	2500	-
23.4(Internal wiring)	-	2500	-
23.3(Internal wiring)	-	2500	-
23.1 & 23.2(Internal wiring)	-	2500	-
22.111(Constructions)	-	2500	-
22.111(Constructions)	-	3500	-
22.11o(Constructions)	-	3500	-
22.109(Constructions)	-	3500	-
22.108(Constructions)	-	3500	-
22.101 to 22.107(Constructions)	-	3500	-
22.13 to 22.48(Constructions)	-	3500	-
22.12(Constructions)	-	3500	-
22.11(Constructions)	-	3500	-
22.11(Constructions)	-	3500	-
22.7 to 22.10(Constructions)	-	3500	-
22.6(Constructions)	-	3500	-
22.5(Constructions)	-	3500	-
22.4(Constructions)	-	3500	-
22.3(Constructions)	-	3500	-
22.2(Constructions)	-	3500	-
22.1(Constructions)	-	3500	-
21.101(MECHANICAL STRENGTH)	-	3500	-
21.101(MECHANICAL STRENGTH)	-	3500	-
21.2(MECHANICAL STRENGTH)	-	3500	-
21.1(MECHANICAL STRENGTH)	-	3500	-
20.2(Stability and mechanical hazards)	-	3500	-
20.1(Stability and mechanical hazards)	-	3500	-
19.104(ABNORMAL OPERATION)	-	4000	-
19.103(ABNORMAL OPERATION)	-	4000	-
19.102(ABNORMAL OPERATION)	-	4000	-
19.101(ABNORMAL OPERATION)	-	4000	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	4000	-
17(Overload protection of transformers and associated circuits)	-	3500	-
16.3(Insulation resistance test)	-	3500	-
16.3(Electric strength test)	-	3500	-
16.1 & 16.2(Leakage current test)	-	3500	-
15.3(Moisture resistance)	-	3500	-
15.3(Moisture resistance)	-	6000	-
15.3(Moisture resistance)	-	6000	-
15.2(Moisture resistance)	-	6000	-
15.2(Moisture resistance)	-	6000	-
15.2(Moisture resistance)	-	6000	-
15.2(Moisture resistance)	-	6000	-
15.1(Moisture resistance)	-	6000	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	3500	-
13.3 and Table No.- 4(Electric strength test)	-	3500	-
13.1, 13.2(Leakage current test)	-	3500	-
13.1, 13.2(Leakage current test)	-	3500	-
11.101(Heating)	-	4000	-
11.1 to 11.8, Table No.-3(Heating)	-	4000	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	3500	-
8.1.5(Protection against access to live parts)	-	2500	-
8.1.4(Protection against access to live parts)	-	2500	-
8.1.3(Protection against access to live parts)	-	2500	-
8.1.2(Protection against access to live parts)	-	2500	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	2500	-
7.14(Legibility & Durability of Markings test)	-	1000	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	1000	-
32(Radiation ,Toxicity and similar hazards)	-	3500	-
31(Resistance to Rusting)	-	3500	-
30(Resistance to Heat & Fire)	-	3500	-
29(Clearances, Creepage Distances & Solid Insulation)	-	3500	-
28(Screws & Connections)	-	3500	-
27(Provision For Earthing)	-	3500	-
26(Terminals For External Conductors)	-	3500	-
25(Supply Connection & External Flexible Cords)	-	3500	-
23(Internal wiring)	-	2500	-
22(Construction)	-	3500	-
21(Mechanical strength)	-	3500	-
20(Stability & Mechanical Hazards)	-	3500	-
19(Abnormal Operation)	-	4000	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	3500	-
16(Leakage Current and Electric Strength)	-	3500	-
15(Moisture Resistance)	-	6000	-
14(Transient Over Voltage)	-	3500	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	3500	-
11(Temperature Rise/ Heating)	-	3500	-
10(Power Input & Current)	-	3500	-
9(Starting Of Motor Operated Appliances)	-	3500	-
8(Protection against access to live parts)	-	3500	-
32(Radiation ,Toxicity and similar hazards)	-	3500	-
31(Resistance to Rusting)	-	3500	-
30(Resistance to Heat & Fire)	-	3500	-
29(Clearances, Creepage Distances & Solid Insulation)	-	3500	-
28(Screws & Connections)	-	3500	-
27(Provision For Earthing)	-	3500	-
26(Terminals For External Conductors)	-	3500	-
25(Supply Connection & External Flexible Cords)	-	3500	-
23(Internal wiring)	-	2500	-
22(Construction)	-	3500	-
21(Mechanical strength)	-	3500	-
20(Stability & Mechanical Hazards)	-	3500	-
19(Abnormal Operation)	-	3500	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	3500	-
16(Leakage Current and Electric Strength)	-	3500	-
15(Moisture Resistance)	-	6000	-
14(Transient Over Voltage)	-	3500	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	3500	-
11(Temperature Rise/ Heating)	-	3500	-
10(Power Input & Current)	-	3500	-
9(Starting Of Motor Operated Appliances)	-	3500	-
8(Protection against access to live parts)	-	3500	-
19.11.4.4(Surge immunity test)	-	4000	-
6(Classification- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking, IS 302-2-9)	-	1000	-
7.3(Marking- IS 302-1)	-	1000	-
7.4(Marking- IS 302-1)	-	1000	-
7.5(Marking- IS 302-1)	-	1000	-
7.5(Marking- IS 302-1)	-	1000	-
7.6(Marking- IS 302-1)	-	1000	-
7.7(Marking- IS 302-1)	-	1000	-
7.8(Marking- IS 302-1)	-	1000	-
7.9(Marking- IS 302-1)	-	1000	-
7.1O(Marking- IS 302-1)	-	1000	-
7.11(Marking- IS 302-1)	-	1000	-
7.12(Marking- IS 302-2-9)	-	1000	-
7.13(Marking- IS 302-1)	-	1000	-
7.14(Marking- IS 302-1)	-	1000	-
7.14(Marking- IS 302-2-9)	-	1000	-
7.15(Marking- IS 302-1)	-	1000	-
7.101(Marking- IS 302-2-9)	-	1000	-
8(Protection Against Access To live parts)	-	3500	-
11(Heating, IS 302-1, Table -3)	-	4000	-
11(Heating, IS 302-1, Table -3)	-	4000	-
11(Heating, IS 302-1, Table -3)	-	4000	-
11(Heating, IS 302-1, Table -3)	-	4000	-
11(Heating, IS 302-1, Table -3)	-	4000	-
11(Heating, IS 302-1, Table -3)	-	4000	-
11(Heating, IS 302-1)	-	4000	-
11.101(Heating, IS 302-2-9)	-	4000	-
13.2(Leakage Current And Electrical Strength At Operating Temperature)	-	3500	-
13.3(Leakage Current And Electrical Strength At Operating Temperature)	-	3500	-
14(Trasient Overvoltage)	-	3500	-
15.1(Moisture Resistance)	-	3500	-
15.101(Moisture Resistance)	-	6000	-
16.2(Leakage Current And Electrical Strength At Operating Temperature)	-	3500	-
16.3(Leakage Current And Electrical Strength At Operating Temperature)	-	3500	-
17(Over Load Protection of Transformers and associated circuits)	-	3500	-
19.2(Abnormal Operation, IS 302-1)	-	3500	-
19.3(Abnormal Operation, IS 302-1)	-	3500	-
19.4(Abnormal Operation, IS 302-1)	-	3500	-
19.5(Abnormal Operation, IS 302-1)	-	3500	-
19.6(Abnormal Operation, IS 302-1)	-	3500	-
19.7(Abnormal Operation, IS 302-1)	-	3500	-
19.9(Abnormal Operation, IS 302-1)	-	3500	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	3500	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	3500	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	3500	-
19.17(Abnormal Operation, IS 302-1)	-	3500	-
19.17(Abnormal Operation, IS 302-1)	-	3500	-
19.101(Abnormal Operation , IS 302-2-9)	-	3500	-
19.102(Abnormal Operation , IS 302-2-9)	-	3500	-
19.103(Abnormal Operation , IS 302-2-9)	-	3500	-
19.104(Abnormal Operation , IS 302-2-9)	-	3500	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	3500	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	3500	-
20.101(Stability & Mechanical Hazards, IS 302-2-9)	-	3500	-
21.1(Mechanical Strength, IS 302-1)	-	3500	-
21.2(Mechanical Strength, IS 302-1)	-	3500	-
21.3(Mechanical Strength, IS 302-1)	-	3500	-
21.101(Mechanical Strength, IS 302-2-9)	-	3500	-
22(Construction, IS 302-1)	-	3500	-
22.101(Construction, IS 302-2-9)	-	3500	-
22.102(Construction, IS 302-2-9)	-	3500	-
22.103(Construction, IS 302-2-9)	-	3500	-
22.104(Construction, IS 302-2-9)	-	3500	-
22.105(Construction, IS 302-2-9)	-	3500	-
22.106(Construction, IS 302-2-9)	-	3500	-
22.107(Construction, IS 302-2-9)	-	3500	-
22.108(Construction, IS 302-2-9)	-	3500	-
22.109(Construction, IS 302-2-9)	-	3500	-
22.110(Construction, IS 302-2-9)	-	3500	-
22.111(Construction, IS 302-2-9)	-	3500	-
22.112(Construction, IS 302-2-9)	-	3500	-
23.1(Internal Wiring, IS 302-1)	-	2500	-
23.2(Internal Wiring, IS 302-1)	-	2500	-
23.3(Internal Wiring, IS 302-1)	-	2500	-
23.4(Internal Wiring, IS 302-1)	-	2500	-
23.6(Internal Wiring, IS 302-1)	-	2500	-
23.7(Internal Wiring, IS 302-1)	-	2500	-
23.8(Internal Wiring, IS 302-1)	-	2500	-
23.9(Internal Wiring, IS 302-1)	-	2500	-
23.10(Internal Wiring, IS 302-1)	-	2500	-
25.1(Supply connection and external flexible cords, IS 302-2-9)	-	3500	-
25.2(Supply connection and external flexible cords, IS 302-1)	-	3500	-
25.3(Supply connection and external flexible cords, IS 302-1)	-	3500	-
25.4(Supply connection and external flexible cords, IS 302-1)	-	3500	-
25.5(Supply connection and external flexible cords, IS 302-1)	-	3500	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	3500	-
25.7(Supply Connection and External Flexible Cords, IS 302-2-9)	-	3500	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.9(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.10(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.20(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.23(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.24(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-

11 Mar, 2027

-
Included w.e.f 28.01.2026 Exclusion: Cl 19.11.4.1 (Electrostatic discharges), 19.11.4.2 (Radiated fields), 19.11.4.3 (Fast transient bursts), 19.11.4.5 (Immunity to conducted discharges), 19.11.4.6 (Class 3 Voltage dips and interruptions), 19.11.4.7 (Harmonics), 24.0 (Components), 32.2 (Radiation ,Toxicity and similar hazards)

IS 374 (2019)

Specification for electric ceiling type fans and regulators (Third Revision)

28000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	1000	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	1000	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	1000	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	1000	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	2000	-
8.1,a(Marking )	-	2000	-
8.1,b(Marking )	-	2000	-
8.1,c(Marking )	-	2000	-
8.1,d(Marking )	-	2000	-
8.1,e(Marking )	-	2000	-
8.1,f(Marking )	-	2000	-
8.1,g(Marking )	-	2000	-
8.2(Marking )	-	2000	-
8.3,a(Marking )	-	2000	-
8.3,b(Marking )	-	2000	-
8.3,c(Marking )	-	2000	-
8.3,d(Marking )	-	2000	-
8.3,e(Marking )	-	2000	-
8.4(Marking )	-	2000	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	2000	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	2000	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	2000	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	2000	-
6.2(Rating)	-	1000	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	2000	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	3500	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	5000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	3000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	3000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	3000	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	2000	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	2000	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	3000	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	5000	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	5000	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	2000	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	3000	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	3000	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	3000	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	2000	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	2000	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	2000	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	2000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	2000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	2000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	2000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	2000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	2000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	2000	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	1500	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	2000	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	2000	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	2000	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	2000	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	2000	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	2500	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	2000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	2500	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	2500	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	2500	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	2500	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	2500	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	2000	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	2000	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	2000	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	3000	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	2000	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	2000	-
10.1(Speed Regulators)	-	2000	-
10.2(Speed Regulators)	-	2000	-
10.2(Speed Regulators)	-	2000	-
10.2(Speed Regulators)	-	2000	-
10.3(Speed Regulators)	-	2000	-
10.4(Speed Regulators)	-	2000	-
10.5(Speed Regulators)	-	2000	-
10.6(Speed Regulators)	-	2000	-
10.7(Speed Regulators)	-	2000	-
10.7(Speed Regulators)	-	2000	-
10.8(Speed Regulators)	-	2000	-
11.1(Starting)	-	3000	-
11.2(Starting)	-	3000	-
12(Interchangeability)	-	2000	-
13(Silent Operation)	-	2000	-
14.3 & Table 1(Test for Air Performance)	-	6000	-
14.3 & Table 1(Test for Air Performance)	-	6000	-
14.4(Measurement of Speed of the Fan )	-	2000	-
14.4(Measurement of Speed of the Fan )	-	2000	-
14.5(Measurement of Power factor and Power Input)	-	2000	-
14.5(Measurement of Power factor and Power Input)	-	2000	-
16(Endurance Test)	-	5000	-
16(Endurance Test)	-	5000	-
16(Endurance Test)	-	5000	-
16(Endurance Test)	-	5000	-
16(Endurance Test)	-	5000	-
16(Endurance Test)	-	5000	-
17(Test for Harmonic Distortion)	-	3000	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	1000	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	1000	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	1000	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	1000	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	2000	-
8.1,a(Marking )	-	2000	-
8.1,b(Marking )	-	2000	-
8.1,c(Marking )	-	2000	-
8.1,d(Marking )	-	2000	-
8.1,e(Marking )	-	2000	-
8.1,f(Marking )	-	2000	-
8.1,g(Marking )	-	2000	-
8.2(Marking )	-	2000	-
8.3(Marking )	-	2000	-
8.3,a(Marking )	-	2000	-
8.3,b(Marking )	-	2000	-
8.3,c(Marking )	-	2000	-
8.3,d(Marking )	-	2000	-
8.3,e(Marking )	-	2000	-
8.4(Marking )	-	2000	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	2000	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	2000	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	2000	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	2000	-
6.2(Rating)	-	1000	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	2000	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	3000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	5000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	5000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	5000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	5000	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	2000	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	2000	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	2000	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	5000	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	5000	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	2000	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	2500	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	2500	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	2500	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	2000	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	2000	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	2000	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	2000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	2000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	2000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	2000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	2000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	2000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	2000	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	2000	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	2000	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	2000	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	2000	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	1000	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	1000	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	2000	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	2000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	2000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	2000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	2000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	2000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	2000	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	2000	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	2000	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	2000	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	3000	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	3000	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	2000	-
10.1(Speed Regulators)	-	2000	-
10.2(Speed Regulators)	-	2000	-
10.2(Speed Regulators)	-	2000	-
10.2(Speed Regulators)	-	2000	-
10.3(Speed Regulators)	-	2000	-
10.4(Speed Regulators)	-	2000	-
10.5(Speed Regulators)	-	2000	-
10.6(Speed Regulators)	-	2000	-
10.8(Speed Regulators)	-	2000	-
11.1(Starting)	-	2000	-
11.2(Starting)	-	2000	-
12(Interchangeability)	-	1000	-
13(Silent Operation)	-	1000	-
14.3 & Table 1(Test for Air Performance)	-	6000	-
14.3 & Table 1(Test for Air Performance)	-	6000	-
14.4(Measurement of Speed of the Fan )	-	2000	-
14.4(Measurement of Speed of the Fan )	-	2000	-
14.5(Measurement of Power factor and Power Input)	-	2000	-
14.5(Measurement of Power factor and Power Input)	-	2000	-
16(Endurance Test)	-	5000	-
16(Endurance Test)	-	5000	-
16(Endurance Test)	-	5000	-
16(Endurance Test)	-	5000	-
16(Endurance Test)	-	5000	-
16(Endurance Test)	-	5000	-
17(Test for Harmonic Distortion)	-	2500	-
4(GENERAL REQUIREMENTS)	-	1000	-
5(GENERAL NOTES ON TESTS)	-	1000	-
15.1, 15.2(Air delivery and service value)	-	6000	-
Cl-9 (Cl-19.11.4.4 of IS 302-1)(Surge Immunity test)	-	2500	-
Cl-9 (Cl-19.101 of IS 302-1)(Abnormal Operation)	-	2000	-
(Cl. 17 of IS 302-2-80 :2017)(Overload protection of transformers and associated circuits)	-	2500	-
(Cl.4.4 of IS 374: 2019)(Bearings)	-	2000	-
(Cl. 4.5 of IS 374: 2019)(Brushless DC Motor)	-	1500	-
(Cl.4.6 of IS 374: 2019)(Enclosure)	-	1500	-
(Cl. 7.6 of IS 302 Part 1)(Marking and Instructions)	-	1500	-
Cl. 7.8 of IS 302-2-80 :2017(MARKING AND INSTRUCTIONS)	-	1500	-
(Cl. 7.12 of IS 302-2-80 :2017)(Marking and Instructions)	-	1500	-
(Cl. 7.12.1 of IS 302-2-80 :2017)(Marking and Instructions)	-	1500	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	1500	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	1500	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	1500	-
(Cl. 7.12.7 of IS 302-1: 2008(Marking and Instructions)	-	1500	-
(Cl. 7.13 of IS 302-1: 2008)(Marking and Instructions)	-	1500	-
(Cl. 7.14 of IS 302-1: 2008)(Marking and Instructions)	-	1500	-
(Cl. 10.1 of IS 374: 2019)(SPEED REGULATORS)	-	2000	-
(Cl. 10.3 of IS 374: 2019)(SPEED REGULATORS)	-	2000	-
(Cl. 10.4 of IS 374: 2019)(SPEED REGULATORS)	-	2000	-
(Cl. 10.7 of IS 374: 2019)(SPEED REGULATORS)	-	2000	-
(Cl. 10.7 of IS 374: 2019)(SPEED REGULATORS)	-	2000	-
(Cl. 10.8 of IS 374: 2019)(SPEED REGULATORS)	-	2000	-
(Cl. 11.2 of IS 374: 2019)(STARTING)	-	2000	-
(Cl. 13 of IS 374: 2019)(SILENT OPERATION)	-	1000	-
(Cl. 15.1 of IS 374: 2019)(PERFORMANCE REQUIREMENTS)	-	6000	-
(Cl. 15.1 of IS 374: 2019)(PERFORMANCE REQUIREMENTS)	-	6000	-
(Cl. 17 of IS 374: 2019(Test for Harmonic Distortion)	-	2500	-
(Cl. 8.2 of IS 302-1: 2008)(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	2000	-
(Cl. 11 of IS 302-1: 2008)(HEATING)	-	3000	-
(Cl. 15 of IS 302-1: 2008)(MOISTURE RESISTANCE)	-	5000	-
(Cl. 15 of IS 302-1: 2008)(MOISTURE RESISTANCE)	-	5000	-
(Cl. 15 of IS 302-1: 2008.(MOISTURE RESISTANCE)	-	5000	-
(Cl. 17 of IS 302-1: 2008)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	2500	-
(Cl. 17 of IS 302-1: 2008)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	2500	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	2500	-
(Cl. 19.7 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	2500	-
(Cl. 19 of IS 302-2-80 :2017)(ABNORMAL OPERATION)	-	2500	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	2500	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	2500	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	2500	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	2500	-
(Cl. 20.102 of IS 302-2-80 :2017)(STABILITY AND MECHANICAL HAZARDS)	-	2000	-
(Cl. 22.14 of IS 302-1: 2008)(CONSTRUCTION)	-	3000	-
(Cl. 22.18 of IS 302-1: 2008)(Electric Ceiling type fan-Specification)	-	3000	-
(Cl. 22.21 of IS 302-1: 2008)(CONSTRUCTION)	-	3000	-
(Cl. 22.22 of IS 302-1: 2008)(CONSTRUCTION)	-	3000	-
(Cl. 22.41 of IS 302-1: 2008)(CONSTRUCTION)	-	2000	-
(Cl. 22.44 of IS 302-1: 2008)(CONSTRUCTION)	-	2000	-
(Cl. 22.101 of IS 302-2-80: 2017)(CONSTRUCTION)	-	2000	-
(Cl. 23.1 of IS 302-1: 2008)(INTERNAL WIRING)	-	2000	-
(Cl. 23.2 of IS 302-1: 2008)(INTERNAL WIRING)	-	2000	-
(Cl. 23.4 of IS 302-1: 2008)(INTERNAL WIRING)	-	2000	-
(Cl. 23.5 of IS 302-1: 2008)(INTERNAL WIRING)	-	2000	-
(Cl. 23.6 of IS 302-1: 2008)(INTERNAL WIRING)	-	2000	-
(Cl. 23.7 of IS 302-1: 2008)(INTERNAL WIRING)	-	2000	-
(Cl. 23.9 of IS 302-1: 2008)(INTERNAL WIRING)	-	2000	-
(Cl. 23.10 of IS 302-1: 2008)(INTERNAL WIRING)	-	2000	-
(Cl. 26.1 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	2000	-
(Cl. 26.8 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	2000	-
(Cl. 26.9 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	2000	-
(Cl. 26.10 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	2000	-
(Cl. 27.1 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	2000	-
(Cl. 27.2 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	2000	-
(Cl. 27.4 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	2000	-
(Cl. 27.5 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	2000	-
(Cl. 28.4 of IS 302-1: 2008)(SCREWS AND CONNECTIONS)	-	2000	-
(Cl. 30.2 of IS 302-1: 2008)(RESISTANCE TO HEAT AND FIRE)	-	3000	-
(Cl. 30.2 of IS 302-1: 2008)(RESISTANCE TO HEAT AND FIRE)	-	3000	-
(Cl. 32 of IS 302-1: 2008)(Radiation, toxicity and similar hazards)	-	2000	-
10.7(Speed Regulators)	-	2000	-
10.7(Speed Regulators)	-	2000	-
(Cl. 22.2 of IS 302-1: 2008)(CONSTRUCTION)	-	2000	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	1000	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	1000	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	1000	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	1000	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	2000	-
8.1,a(Marking )	-	2000	-
8.1,b(Marking )	-	2000	-
8.1,c(Marking )	-	2000	-
8.1,d(Marking )	-	2000	-
8.1,e(Marking )	-	2000	-
8.1,f(Marking )	-	2000	-
8.1,g(Marking )	-	2000	-
8.2(Marking )	-	2000	-
8.3,a(Marking )	-	2000	-
8.3,b(Marking )	-	2000	-
8.3,c(Marking )	-	2000	-
8.3,d(Marking )	-	2000	-
8.3,e(Marking )	-	2000	-
8.4(Marking )	-	2000	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	2000	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	2000	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	2000	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	2000	-
6.2(Rating)	-	2000	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	2000	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	2000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	2000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	3000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	3000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	3000	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	3000	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	3000	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	4000	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	6000	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	6000	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	3500	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	3500	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	3500	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	3500	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	3500	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	3500	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	3500	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	3500	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	3500	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	3500	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	3500	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	3500	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	3500	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	3500	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	3500	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	2000	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	2000	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	2000	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	2000	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	2000	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	3500	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	3500	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	3500	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	3500	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	3500	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	3500	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	3500	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	2000	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	3500	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	3500	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	3500	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	3500	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	3500	-
10.1(Speed Regulators)	-	3500	-
10.2(Speed Regulators)	-	3500	-
10.2(Speed Regulators)	-	3500	-
10.2(Speed Regulators)	-	3500	-
10.3(Speed Regulators)	-	3500	-
10.4(Speed Regulators)	-	3500	-
10.5(Speed Regulators)	-	3500	-
10.6(Speed Regulators)	-	3500	-
10.7(Speed Regulators)	-	3500	-
10.7(Speed Regulators)	-	3500	-
10.8(Speed Regulators)	-	3500	-
11.1(Starting)	-	3500	-
11.2(Starting)	-	3500	-
12(Interchangeability)	-	3500	-
13(Silent Operation)	-	3500	-
14.3 & Table 1(Test for Air Performance)	-	3500	-
14.3 & Table 1(Test for Air Performance)	-	3500	-
14.4(Measurement of Speed of the Fan )	-	3500	-
14.4(Measurement of Speed of the Fan )	-	3500	-
14.5(Measurement of Power factor and Power Input)	-	3500	-
14.5(Measurement of Power factor and Power Input)	-	3500	-
16(Endurance Test)	-	4000	-
16(Endurance Test)	-	4000	-
16(Endurance Test)	-	4000	-
16(Endurance Test)	-	4000	-
16(Endurance Test)	-	4000	-
16(Endurance Test)	-	4000	-
17(Test for Harmonic Distortion)	-	4000	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	1000	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	1000	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	1000	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	1000	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	2000	-
8.1,a(Marking )	-	2000	-
8.1,b(Marking )	-	2000	-
8.1,c(Marking )	-	2000	-
8.1,d(Marking )	-	2000	-
8.1,e(Marking )	-	2000	-
8.1,f(Marking )	-	2000	-
8.1,g(Marking )	-	2000	-
8.2(Marking )	-	2000	-
8.3(Marking )	-	2000	-
8.3,a(Marking )	-	2000	-
8.3,b(Marking )	-	2000	-
8.3,c(Marking )	-	2000	-
8.3,d(Marking )	-	2000	-
8.3,e(Marking )	-	2000	-
8.4(Marking )	-	2000	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	2000	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	2000	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	2000	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	2000	-
6.2(Rating)	-	1000	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	3500	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	3500	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	4000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	4000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	4000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	4000	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	3500	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	3500	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	5000	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	6000	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	6000	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	4000	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	4000	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	4000	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	4000	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	3500	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	3500	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	3500	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	3500	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	3500	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	3500	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	3500	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	3500	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	3500	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	3500	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	3500	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	2000	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	2000	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	2000	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	2000	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	2000	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	3500	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	3500	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	3500	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	3500	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	3500	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	3500	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	3500	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	3500	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	3500	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	3500	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	3500	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	3500	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	3500	-
10.1(Speed Regulators)	-	3500	-
10.2(Speed Regulators)	-	3500	-
10.2(Speed Regulators)	-	3500	-
10.2(Speed Regulators)	-	3500	-
10.3(Speed Regulators)	-	3500	-
10.4(Speed Regulators)	-	3500	-
10.5(Speed Regulators)	-	3500	-
10.6(Speed Regulators)	-	3500	-
10.8(Speed Regulators)	-	3500	-
11.1(Starting)	-	3500	-
11.2(Starting)	-	3500	-
12(Interchangeability)	-	3500	-
13(Silent Operation)	-	3500	-
14.3 & Table 1(Test for Air Performance)	-	8000	-
14.3 & Table 1(Test for Air Performance)	-	8000	-
14.4(Measurement of Speed of the Fan )	-	3500	-
14.4(Measurement of Speed of the Fan )	-	3500	-
14.5(Measurement of Power factor and Power Input)	-	3500	-
14.5(Measurement of Power factor and Power Input)	-	3500	-
16(Endurance Test)	-	4000	-
16(Endurance Test)	-	4000	-
16(Endurance Test)	-	4000	-
16(Endurance Test)	-	4000	-
16(Endurance Test)	-	4000	-
16(Endurance Test)	-	4000	-
17(Test for Harmonic Distortion)	-	4000	-
4(GENERAL REQUIREMENTS)	-	1000	-
5(GENERAL NOTES ON TESTS)	-	1000	-
15.1, 15.2(Air delivery and service value)	-	8000	-
Cl-9 (Cl-19.11.4.4 of IS 302-1)(Surge Immunity test)	-	4000	-
Cl-9 (Cl-19.101 of IS 302-1)(Abnormal Operation)	-	4000	-
(Cl. 17 of IS 302-2-80 :2017)(Overload protection of transformers and associated circuits)	-	4000	-
(Cl.4.4 of IS 374: 2019)(Bearings)	-	4000	-
(Cl. 4.5 of IS 374: 2019)(Brushless DC Motor)	-	4000	-
(Cl.4.6 of IS 374: 2019)(Enclosure)	-	4000	-
(Cl. 7.6 of IS 302 Part 1)(Marking and Instructions)	-	2000	-
Cl. 7.8 of IS 302-2-80 :2017(MARKING AND INSTRUCTIONS)	-	2000	-
(Cl. 7.12 of IS 302-2-80 :2017)(Marking and Instructions)	-	2000	-
(Cl. 7.12.1 of IS 302-2-80 :2017)(Marking and Instructions)	-	2000	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	2000	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	2000	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	2000	-
(Cl. 7.12.7 of IS 302-1: 2008(Marking and Instructions)	-	2000	-
(Cl. 7.13 of IS 302-1: 2008)(Marking and Instructions)	-	2000	-
(Cl. 7.14 of IS 302-1: 2008)(Marking and Instructions)	-	2000	-
(Cl. 10.1 of IS 374: 2019)(SPEED REGULATORS)	-	3500	-
(Cl. 10.3 of IS 374: 2019)(SPEED REGULATORS)	-	3500	-
(Cl. 10.4 of IS 374: 2019)(SPEED REGULATORS)	-	3500	-
(Cl. 10.7 of IS 374: 2019)(SPEED REGULATORS)	-	3500	-
(Cl. 10.7 of IS 374: 2019)(SPEED REGULATORS)	-	3500	-
(Cl. 10.8 of IS 374: 2019)(SPEED REGULATORS)	-	3500	-
(Cl. 11.2 of IS 374: 2019)(STARTING)	-	3500	-
(Cl. 13 of IS 374: 2019)(SILENT OPERATION)	-	3500	-
(Cl. 15.1 of IS 374: 2019)(PERFORMANCE REQUIREMENTS)	-	8000	-
(Cl. 15.1 of IS 374: 2019)(PERFORMANCE REQUIREMENTS)	-	8000	-
(Cl. 17 of IS 374: 2019(Test for Harmonic Distortion)	-	3500	-
(Cl. 8.2 of IS 302-1: 2008)(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	3500	-
(Cl. 11 of IS 302-1: 2008)(HEATING)	-	5000	-
(Cl. 15 of IS 302-1: 2008)(MOISTURE RESISTANCE)	-	6000	-
(Cl. 15 of IS 302-1: 2008)(MOISTURE RESISTANCE)	-	6000	-
(Cl. 15 of IS 302-1: 2008.(MOISTURE RESISTANCE)	-	6000	-
(Cl. 17 of IS 302-1: 2008)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	4000	-
(Cl. 17 of IS 302-1: 2008)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	4000	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	4000	-
(Cl. 19.7 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	4000	-
(Cl. 19 of IS 302-2-80 :2017)(ABNORMAL OPERATION)	-	4000	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	4000	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	4000	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	4000	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	4000	-
(Cl. 20.102 of IS 302-2-80 :2017)(STABILITY AND MECHANICAL HAZARDS)	-	3500	-
(Cl. 22.14 of IS 302-1: 2008)(CONSTRUCTION)	-	3500	-
(Cl. 22.18 of IS 302-1: 2008)(Electric Ceiling type fan-Specification)	-	3500	-
(Cl. 22.21 of IS 302-1: 2008)(CONSTRUCTION)	-	3500	-
(Cl. 22.22 of IS 302-1: 2008)(CONSTRUCTION)	-	3500	-
(Cl. 22.41 of IS 302-1: 2008)(CONSTRUCTION)	-	3500	-
(Cl. 22.44 of IS 302-1: 2008)(CONSTRUCTION)	-	3500	-
(Cl. 22.101 of IS 302-2-80: 2017)(CONSTRUCTION)	-	3500	-
(Cl. 23.1 of IS 302-1: 2008)(INTERNAL WIRING)	-	3500	-
(Cl. 23.2 of IS 302-1: 2008)(INTERNAL WIRING)	-	3500	-
(Cl. 23.4 of IS 302-1: 2008)(INTERNAL WIRING)	-	3500	-
(Cl. 23.5 of IS 302-1: 2008)(INTERNAL WIRING)	-	3500	-
(Cl. 23.6 of IS 302-1: 2008)(INTERNAL WIRING)	-	3500	-
(Cl. 23.7 of IS 302-1: 2008)(INTERNAL WIRING)	-	3500	-
(Cl. 23.9 of IS 302-1: 2008)(INTERNAL WIRING)	-	3500	-
(Cl. 23.10 of IS 302-1: 2008)(INTERNAL WIRING)	-	3500	-
(Cl. 26.1 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	3500	-
(Cl. 26.8 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	3500	-
(Cl. 26.9 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	3500	-
(Cl. 26.10 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	3500	-
(Cl. 27.1 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	3500	-
(Cl. 27.2 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	3500	-
(Cl. 27.4 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	3500	-
(Cl. 27.5 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	3500	-
(Cl. 28.4 of IS 302-1: 2008)(SCREWS AND CONNECTIONS)	-	3500	-
(Cl. 30.2 of IS 302-1: 2008)(RESISTANCE TO HEAT AND FIRE)	-	4000	-
(Cl. 30.2 of IS 302-1: 2008)(RESISTANCE TO HEAT AND FIRE)	-	4000	-
(Cl. 32 of IS 302-1: 2008)(Radiation, toxicity and similar hazards)	-	4000	-
10.7(Speed Regulators)	-	3500	-
10.7(Speed Regulators)	-	3500	-
(Cl. 22.2 of IS 302-1: 2008)(CONSTRUCTION)	-	3500	-

11 Mar, 2027

-
Included w.e.f 28.01.2026 Exclusion: Cl 19.11.4.1 (Electrostatic discharges), 19.11.4.2 (Radiated fields), 19.11.4.3 (Fast transient bursts), 19.11.4.5 (Immunity to conducted discharges), 19.11.4.6 (Class 3 Voltage dips and interruptions), 19.11.4.7 (Harmonics), 24.0 (Components), 32.2 (Radiation ,Toxicity and similar hazards)

IS 302 : Part 2 : Sec 80 (2017)

Household and similar electrical appliances - Safety: Part 2 - 80 particular requirements for fans (First Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(GENERAL REQUIREMENT)	-	500	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	500	-
6.0(Marking and Instructions)	-	1000	-
7.0(Classification)	-	1000	-
8.0(Protection against access to live parts)	-	1000	-
10.0(Input and Current)	-	2000	-
11.0(Heating)	-	5000	-
13.0(Leakage Current and electric strength at operating temperature)	-	2500	-
14.0(Transient Overvoltage)	-	2000	-
15.0(Moisture resistance)	-	5000	-
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	1000	-
17.0(Overload Protection of transformer and associated circuit)	-	1000	-
19.11.4.4(Surge immunity test)	-	3000	-
20.0(Stability and mechanical hazards)	-	2000	-
21.0(Mechanical Strength)	-	2500	-
22.0(Construction)	-	3000	-
23.0(Internal Wiring)	-	1000	-
25.0(Supply Connection and External Flexible Cords)	-	2500	-
26.0(Terminals for external conductors)	-	2000	-
27.0(Provision For Earthing)	-	3000	-
28.0(Screws and Connections)	-	1000	-
29.0(Creepage Distances and Clearances)	-	1500	-
30.0(Resistance To Heat and Fire)	-	2500	-
31.0(Resistance To Rusting)	-	1000	-
32.0(Radiation, Toxicity and Similar Hazards)	-	1000	-
19.0(Abnormal Operation)	-	5000	-
4(GENERAL REQUIREMENT)	-	1000	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	1000	-
19.11.4.4(Surge immunity test)	-	5000	-

11 Mar, 2027

-
Included w.e.f 28.01.2026 Exclusion: Cl19.11.4.1 (Electrostatic discharges), 19.11.4.2 (Radiated fields), 19.11.4.3 (Fast transient bursts), 19.11.4.5 (Immunity to conducted discharges), 19.11.4.6 (Class 3 Voltage dips and interruptions), 19.11.4.7 (Harmonics), 24.0 (Components), 32.2 (Radiation ,Toxicity and similar hazards)

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

32000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1)	-	500	-
5(General conditions for the tests)	-	500	-
11.8(Temperature rise)	-	2000	-
11.7(Duration corresponding)	-	200	-
11.6(Combined appliances)	-	200	-
11.5(Motor-operated appliances)	-	200	-
11.4(Heating appliances)	-	200	-
8.1.5(Live parts of built-in appliances)	-	800	-
18(Endurance)	-	0	-
17(Overload protection of transformers and associated circuits)	-	1000	-
16(Leakage current and electric strength)	-	1000	-
4(General requirement)	-	500	-
31(Resistance to Rusting)	-	1000	-
30.2(Needle Flame Test)	-	1000	-
30.1(Ball pressure test)	-	1000	-
29(clearance, creepage distances and solid insulation)	-	1000	-
28(Screw test and connections)	-	1000	-
27.1(Provision for Earthing, IS 302-1)	-	1000	-
26(Terminals for external conductors)	-	1000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
23.1(Internal Wiring, IS 302-1)	-	1000	-
22.1(Construction, IS 302-1)	-	1000	-
21.1(Mechanical Strength, IS 302-1)	-	2000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
19(Abnormal Operation)	-	2000	-
18(Endurance)	-	0	-
17(Over Load Protection of Transformers and associated circuits)	-	1000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	500	-
16.2(Leakage Current (after Clause 15))	-	500	-
16.1(General)	-	1000	-
16.0(General)	-	1000	-
15.3(Humidity Test)	-	1000	-
15.2(Spillage Test)	-	0	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	1000	-
15.0(Moisture resistance)	-	1000	-
14(Transient Over Voltages)	-	1000	-
13.3(Electric Strength at operating temperature)	-	500	-
13.2(Leakage current at operating temperature)	-	500	-
13(Leakage current and electric strength at operating temperature)	-	1000	-
11.3(Heating)	-	500	-
11.2(General)	-	500	-
11.1(General)	-	500	-
10.2(Current input)	-	1000	-
10.1(Power input)	-	1000	-
9(Starting of motor operation test requirements and tests)	-	0	-
8.1.4(Protection against live parts against protective impedance)	-	200	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	200	-
8.1.2(Protection against live parts in openings)	-	200	-
8.1.1(Protection against live parts in all positions)	-	200	-
7(Marking and instructions)	-	500	-
A.2(Earth continuity test)	-	500	-
Annex C(Ageing test on motors)	-	800	-
Annex D(Thermal motor protectors)	-	500	-
15.2(Moisture resistance)	-	800	-
19.17(Abnormal Operation, IS 302-1)	-	500	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	500	-
21.2(Mechanical Strength, IS 302-1)	-	1000	-
21.3(Mechanical Strength, IS 302-1)	-	500	-
22.5(Construction)	-	500	-
22.6(Construction, IS 302-1)	-	500	-
22.11(Construction, IS 302-1)	-	500	-
22.16(Construction)	-	500	-
22.32(Construction, IS 302-1)	-	500	-
22.42(Construction)	-	500	-
23.3(Internal Wiring, IS 302-1)	-	500	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	500	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
26.5(Terminals for external conductors)	-	500	-
27.5(Provision for Earthing, IS 302-1)	-	500	-
28.1(Screws and connections)	-	500	-
22.2(Construction, IS 302-1)	-	500	-
22.3(Construction, IS 302-1)	-	500	-
B.22.4(Construction, IS 302-1)	-	500	-
B.22.5(Construction, IS 302-1)	-	500	-
30.2(Glow Wire Test)	-	500	-

11 Mar, 2027

-
Included w.e.f 17.03.2025 Exclusion: Cl 19.11.4.1- Cl 19.11.4.7(EMI/EMC), Cl 24 (Components) "Domestic Electric Clothes Washing Machines (For testing charges please refer part 2 standard in LIMS)"

IS 302 : Part 2 : Sec 21 (2024)

Household and Similar Electrical Appliancesï¿½Safety Part 2 Particular Requirements Section 21 Storage Water Heaters

32000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General requirement)	-	0	-
5(General conditions for the tests)	-	0	-
6(Classification)	-	1000	-
7(Marking and instructions)	-	1000	-
8(Protection against access to live parts)	-	1000	-
9(Starting of motor-operated appliances)	-	0	-
10(Power input and current)	-	2000	-
11(Heating)	-	2000	-
13(Leakage current and electric strength at operating temperature)	-	2000	-
14(Transient overvoltages)	-	2000	-
15(Moisture resistance)	-	2000	-
16(Leakage current and electric strength)	-	2000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
18(Endurance)	-	0	-
19(Abnormal operation)	-	2000	-
20(Stability and mechanical hazards)	-	1000	-
21(Mechanical strength)	-	1000	-
22(Construction)	-	2000	-
23(Internal wiring)	-	1000	-
25(Supply connection and external flexible cords)	-	1000	-
26(Terminals for external conductors)	-	1000	-
27(Provision for earthing)	-	2000	-
28(Screws and connections)	-	1000	-
29(Clearances, creepage distances and solid insulation)	-	1000	-
30(Resistance to heat and fire)	-	2000	-
31(Resistance to rusting)	-	500	-
32(Radiation, toxicity and similar hazards)	-	500	-
A.101(Pressure test)	-	0	-
4(General requirement)	-	0	-
5(General conditions for the tests)	-	0	-
6(Classification)	-	1000	-
7(Marking and instructions)	-	1000	-
8(Protection against access to live parts)	-	1000	-
9(Starting of motor-operated appliances)	-	0	-
10(Power input and current)	-	2000	-
11(Heating)	-	2000	-
13(Leakage current and electric strength at operating temperature)	-	2000	-
14(Transient overvoltages)	-	2000	-
15(Moisture resistance)	-	2000	-
16(Leakage current and electric strength)	-	2000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
18(Endurance)	-	0	-
19(Abnormal operation)	-	2000	-
20(Stability and mechanical hazards)	-	1000	-
21(Mechanical strength)	-	1000	-
22(Construction)	-	2000	-
23(Internal wiring)	-	1000	-
25(Supply connection and external flexible cords)	-	1000	-
26(Terminals for external conductors)	-	1000	-
27(Provision for earthing)	-	2000	-
28(Screws and connections)	-	1000	-
29(Clearances, creepage distances and solid insulation)	-	1000	-
30(Resistance to heat and fire)	-	2000	-
31(Resistance to rusting)	-	500	-
32(Radiation, toxicity and similar hazards)	-	500	-
A.101(Pressure test)	-	0	-

11 Mar, 2027

-
Included Revised version of IS 302(P-2/S-21):2024 w.e.f. 05.09.2024 Exclusion: EMI/EMC, Cl.24 (Components)

IS 16333 : Part 3 (2022)

Mobile phone handsets: Part 3 Indian language support for mobile phone handsets - Specific requirements(Second Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Inputting of text)	-	6000	-
5.2(Message Readability)	-	6000	-
6(Marking)	-	1000	-
"Cl.6.1 "(Marking)	-	1000	-
"Cl.6.2 "(BIS Certification Marking)	-	1000	-
4(Requirements)	-	0	-
5(Tests)	-	0	-
6(Marking)	-	0	-
5.1(Inputting of text)	-	-	-
5.2(Message Readability)	-	-	-
6(Marking)	-	-	-
"Cl.6.1 "(Marking)	-	-	-
"Cl.6.2 "(BIS Certification Marking)	-	-	-
4(Requirements)	-	-	-
5(Tests)	-	-	-
6(Marking)	-	-	-

11 Mar, 2027

-
Included w.e.f. 11.06.2024

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

48000 View breakup
Product: Information technology equipment - Safety: Part 1 general requirements (Second Revision) (Automatic Data Processing Machine, Laptop/Notebook/ Tablet, Printer, Plotter, Scanner, Set Top Box, Telephone answering machines, Visual display unit, videos monitors of screen size 32" & above, Cash Registers, Copying machine/ duplicator, Point of sale terminal, Mail processing machine/ postage machine/ Franking machine, Power adaptor for IT equipments, Visual display unit, videos monitors of screen size upto 32", Passport Reader, Power bank for use in portable applications, Mobile phones, Smart card reader, CCTV Camera/ CCTV Recorders, USB driven Barcode readers, Barcode scanners, iris scanners, Optical Fingerprint Scanners, Smart watches, Wireless Keyboard, Keyboard, Automatic Teller Cash Dispensing Machines, USB Type External Hard Disk Drive, USB type External Solid State Storage Devices (above 256 GB Capacity), Standalone Switch Modñe Power supplies (SMPS) with output Voltage 48 V (max.), Digital Camera.) Grade/Variety/Designations applied for-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.6(Power interface .)	-	2000	-
1.7(Markings and instructions)	-	1000	-
2.1(Protection from electric shock and energy hazards)	-	2000	-
2.2(SELV circuits)	-	2000	-
2.3(TNV circuits)	-	1000	-
2.4(Limited current circuits)	-	2000	-
2.5(Limited power sources .)	-	2000	-
2.6(Provisions for earthing and bonding)	-	2000	-
2.7(Overcurrent and earth fault protection in primary circuits)	-	2000	-
2.8(Safety interlocks)	-	2000	-
2.9(Electrical insulation)	-	1000	-
2.10(Clearances, creepage distances and distances through insulation)	-	1000	-
3.1(General)	-	1000	-
3.2(Connection to a mains supply)	-	1000	-
3.3(Wiring terminals for connection of external conductors)	-	1000	-
3.4(Disconnection from the mains supply)	-	1000	-
3.5(Interconnection of equipment)	-	1000	-
4.1(Stability)	-	2000	-
4.2(Mechanical strength)	-	2000	-
4.3(Design and construction)	-	1000	-
4.4(Protection against hazardous moving parts)	-	1000	-
4.5(Thermal requirements)	-	2000	-
4.6(Openings in enclosures)	-	1000	-
4.7(Resistance to fire)	-	2000	-
5.1(Touch current and protective conductor curren)	-	1000	-
5.2(Electric strength)	-	2000	-
5.3(Abnormal operating and fault conditions)	-	2000	-
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	1000	-
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	1000	-
6.3(Protection of the telecommunication wiring system from overheating)	-	1000	-
7.1(General)	-	1000	-
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	1000	-
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	1000	-
7.4(Insulation between primary circuits and cable distribution systems)	-	1000	-
2.8.2/2.8.5(Interlock switches)	-	0	-
2.10.4.2(Material Group and Comparative Tracking Index)	-	0	-
2.10.5.3(Insulating Compound as Solid Insulation)	-	0	-
2.10.5.6(Thin sheet materials)	-	0	-
2.10.6(PCB material)	-	0	-
2.10.8.2(Thermal conditioning (thermal ageing))	-	0	-
2.10.8.4(Abrasion resistance test)	-	0	-
2.10.9(Thermal Cycling)	-	0	-
2.10.10(Test for Pollution Degree 1 environment and for insulating compound)	-	0	-
2.10.11(Tests for semiconductor devices and for cemented joints)	-	0	-
2.10.12(Enclosed and sealed parts)	-	0	-
3.1.4(Internal wire)	-	0	-
3.2.4(Appliance inlet /connector)	-	0	-
3.2.4(Appliance inlet /connector)	-	0	-
3.2.5(Non re-wirable plug with PVC sheathed cable)	-	0	-
4.3.10(Dust, powders, liquids and gases)	-	0	-
4.3.11(Containers for liquids or gases)	-	0	-
4.3.12(Flammable liquids)	-	0	-
Annex A3(Hot flaming oil test)	-	0	-
Annex U(Insulating winding wires for use without interleaved insulation)	-	0	-
Annex K(Thermal Control)	-	0	-
Annex B(Motor tests under abnormal conditions)	-	0	-
Annex C(Transformers)	-	0	-
Annex DD(Requirements for the mounting means of a rack mounted equipment)	-	0	-
Annex EE(Household and home/ office document/ media shredders)	-	0	-
4.6.2(Bottoms of fire enclosures)	-	0	-
2.10.5.11(SMPS Transformer and Inductor)	-	0	-
2.10.5.12(Wires in wound components)	-	0	-
2.10.5.13(Winding wire)	-	0	-
2.10.5.14(Additional insulation in wound components)	-	0	-

11 Mar, 2027

-
Included w.e.f. 11.06.2024 Exclusion: Cl. 1.5 (Components), Cl. 2.8.2/2.8.5 (Interlock switches), Cl. 2.8.7 (Switches and Relay), Cl. 2.10.5.4 (Opto-coupler), Cl. 3.2.5 (Non re-wirable plug with PVC sheathed cable), Cl. 4.2.8 (Cathode Ray Tubes), Cl. 4.3.8 (Batteries), Cl. 4.3.13.2 (Ionizing radiation), Cl. 4.3.13.3/ Annex Y (Effect of UV radiation on material/Ultraviolet conditioning test), Cl. 4.3.13.4 (Human exposure to ultraviolet (UV) radiation), Cl. 4.3.13.5 (LED, laser class), Annex CC (Evaluation of integrated circuit (IC) current limiters), Annex Q (Voltage Dependent Resistors)

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

52000 View breakup
Product: Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision) (Amplifiers with input power 2000W and above, Electronic games (Video), Plasma/LCD/LED TV of screen size 32" & above, Electronic musical system with input power 200W and above, Optical disc player with built in amplifiers of input power 200W and above, Power adopters for audio, video & similar electronic apparatus, Plasma/ LCD/LED TV of screen size up to 32", Wireless headphone and earphone, Electronic Musical System with input power below 200W, Television other than plasma/LCD/LED/ TVs, Wireless microphone, Video camera, Webcam (Finished product), Smart speaker (with and without display), Bluetooth speakers) Grade/Variety/Designations applied for

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	3000	-
6(Hazardous radiations)	-	0	-
7(Heating under normal operating conditions)	-	4000	-
8(Constructional requirements with regard to the protection against electric shock)	-	4000	-
9(Electric shock hazard under normal operating conditions)	-	4000	-
10(Insulation requirements)	-	6000	-
11(Fault conditions)	-	3000	-
12(Mechanical strength)	-	6000	-
13(CLEARANCES and CREEPAGE DISTANCES)	-	3000	-
15(TERMINALS)	-	3000	-
16(External flexible cords)	-	2500	-
17(Electrical connections and mechanical fixings)	-	2500	-
19(Stability and mechanical hazards)	-	3000	-
20(Resistance to fire)	-	6000	-
6.3()	-	0	-
15(Internal wires and power cords)	-	0	-
20.2.4(Printed Boards)	-	0	-
3(General requirements)	-	0	-
4(General test conditions)	-	0	-
Annex-A(Additional requirements for apparatus with protection against splashing water)	-	2000	-
Annex-B(Apparatus to be connected to the TELECOMMUNICATION NETWORKS)	-	0	-
Annex-L(Additional requirements for electronic flash apparatus for photographic purposes)	-	0	-
Cl.5.1 of Cl.5(General requirements)	-	0	-
Cl.5.1-i) of Cl.5(Comprehensible and easily discernible)	-	0	-
Cl.5.1-ii) of Cl.5(Permanent durability against water and petroleum spirit)	-	0	-
Cl.5.2 of Cl.5(Identification and supply ratings)	-	0	-
Cl.5.2 a) of Cl.5(Identification, maker)	-	0	-
Cl.5.2 b) of Cl.5(Model number or type reference)	-	0	-
Cl.5.2 d) of Cl.5(Nature of supply)	-	0	-
Cl.5.2 e) of Cl.5(Rated supply voltage)	-	0	-
Cl.5.2 f) of Cl.5(Mains frequency if safety dependant)	-	0	-
Cl.5.2 g) of Cl.5(Rated current or power consumption for apparatus supplied by supply apparatus for general use, on apparatus or in instruction manual: Measured current or power consumption: Deviation % (max 10%):)	-	0	-
Cl.5.2 h) of Cl.5(Rated current or power consumption for apparatus intended for connection to an a.c. mains supply:Measured current or power consumption for Television set: Deviation % (max 10%):)	-	0	-
Cl.5.2 h)-i) of Cl.5(appliance coupler for Class I is used for Class II equipment with functional earth connection, the requirements of Clause 15 and Clause 16 related to Class I construction shall be applied up to the connecting point of the protective(earthing) conductor to the functional earth.)	-	0	-
Cl.5.2 h)-ii) of Cl.5(Graphical symbols placed on the apparatus, whether required by this standard or not, shall be in accordance with IEC 60417 or ISO 3864-2 or ISO 7000, if available. In the absence of suitable symbols, the manufacturer may design specific graphical symbols.)	-	0	-
Cl.5.2 h)-iii) of Cl.5(Care shall be taken so that additional markings and instructions not required by this standard do not contradict the markings and instructions required by this standard . Symbols placed on the Equipment shall be explained in the user manual.)	-	0	-
Cl.5.3 of Cl.5(Terminals)	-	0	-
Cl.5.3a) of Cl.5(Earth terminal)	-	0	-
Cl.5.3b) of Cl.5(Hazardous live terminals)	-	0	-
Cl.5.3c) of Cl.5(Markings on supply output terminals)	-	0	-
Cl.5.4 of Cl.5(Caution marking)	-	0	-
Cl.5.4a) of Cl.5(Use of triangle with exclamation mark)	-	0	-
Cl.5.4b) of Cl.5(Marking on loudspeaker grille, IEC 60417-5036)	-	0	-
Cl.5.4c) of Cl.5(User-replaceable coin / button cell battery marking)	-	0	-
Cl.5.5 of Cl.5(Instructions)	-	0	-
Cl.5.5 of Cl.5(Instructions)	-	0	-
Cl.5.5 of Cl.5(Instructions)	-	0	-
Cl.5.5.1 of Cl.5.5(Safety relevant information)	-	0	-
Cl.5.5.2 a) of Cl.5.5(Mains powered equipment not exposed to dripping or splashing. Warning concerning objects filled with liquid, etc.)	-	0	-
Cl.5.5.2 b) of Cl.5.5(Hazardous live terminals, instructions for wiring)	-	0	-
Cl.5.5.2 c) of Cl.5.5(Instructions for replacing lithium battery)	-	0	-
Cl.5.5.2 d) of Cl.5.5(Class I earth connection warning)	-	0	-
Cl.5.5.2 e) of Cl.5.5(Instructions for multimedia system connection)	-	0	-
Cl.5.5.2 f) of Cl.5.5(Special stability warning for attachment of the apparatus to the floor/wall)	-	0	-
Cl.5.5.2 g) of Cl.5.5(Warning: battery exposure to heat)	-	0	-
Cl.5.5.2 h) of Cl.5.5(Warning: protective film on CRT face)	-	0	-
Cl.5.5.2 i) of Cl.5.5("Warning: Non-floor standing TV >7kg")	-	0	-
Cl.5.5.2 j) of Cl.5.5("Warning: User replaceable coin / button cell battery")	-	0	-
Cl.5.5.3 (a-b) of Cl.5.5(Disconnect device: plug/coupler or all-pole mains switch location, accessibility and markings)	-	0	-
Cl.5.5.3 c) of Cl.5.5(Instructions for permanently connected equipment)	-	0	-
Cl.5.5.3 c) i) of Cl.5.5(Marking, signal lamps or similar for completely disconnection from the mains)	-	0	-
Cl.7.1 of Cl.7(General)	-	0	-
"Cl.7.1.1 of Cl.7.1 Table-3"(Requirements)	-	0	-
"Cl.7.1.2 of Cl.7.1 Table-3"(Accessible parts)	-	0	-
"Cl.7.1.3 of Cl.7.1 Table-3"(Parts, other than windings and printed boards, providing electrical insulation)	-	0	-
"Cl.7.1.4 of Cl.7.1 Table-3"(Parts acting as a support or a mechanical barrier)	-	0	-
"Cl.7.1.5 of Cl.7.1 Table-3"(Windings)	-	0	-
"Cl.7.1.6 of Cl.7.1 Table-3"(Parts not subject to a limit under7.1.1 to 7.1.4)	-	0	-
Cl.7.2 of Cl.7(Softening temperature of insulating material supporting parts conductively connected to the mains carrying a current> 0.2 A, shall be at least 150ºC)	-	0	-
Cl.8.1 of Cl.8(Conductive parts covered by lacquer, paper, untreated textile oxide films and beads etc. considered to be bare*)	-	0	-
Cl.8.2 of Cl.8(No shock hazard when changing voltage setting device, fuse-links or handling drawers etc.)	-	0	-
Cl.8.3 of Cl.8(Insulation of hazardous live parts not provided by hygroscopic material)	-	0	-
Cl.8.4 of Cl.8(No risk of electric shock from accessible parts or from parts rendered accessible following the removal of a cover which can be removed by hand)	-	0	-
Cl.8.5 of Cl.8(Class I apparatus*)	-	0	-
Cl.8.5 i) of Cl.8(Basic insulation between hazardous live parts and earthed accessible parts *)	-	0	-
Cl.8.5 ii) of Cl.8(Resistors bridging basic insulation shall complying with 14.1 a) *)	-	0	-
Cl.8.5 iii) of Cl.8(Capacitors bridging basic insulation shall complying with 14.2.1 a) *)	-	0	-
Cl.8.5 iv) of Cl.8(Protective earthing terminal *)	-	0	-
Cl.8.6 of Cl.8(Class II apparatus)	-	0	-
Cl.8.6 a) of Cl.8(Basic and supplementary insulation between hazardous live parts and accessible parts *)	-	0	-
Cl.8.6 b) of Cl.8(Reinforced insulation between hazardous live parts and accessible parts *)	-	0	-
Cl.8.7 of Cl.8(Components bridging insulation)	-	0	-
Cl.8.7 i) of Cl.8(Basic insulation bridged by components complying with 14.4.5.3)	-	0	-
Cl.8.7 ii) of Cl.8(Components bridging basic, supplementary, double or reinforced insulation complying with 14.2 a) or 14.4)	-	0	-
Cl.8.7 iii) of Cl.8(Basic and supplementary insulation each being bridged by a capacitor or RC-unit complying with 14.3.2 a))	-	0	-
Cl.8.7 iv) of Cl.8(Double or reinforced insulation being bridged with 2 capacitors or RC-units in series complying with 14.3.2 a))	-	0	-
Cl.8.7 v) of Cl.8(Double or reinforced insulation being bridged with a single capacitor or RC-unit complying with 14.3.2 b))	-	0	-
Cl.8.8 of Cl.8(Insulation thickness and thin sheet materials)	-	0	-
Cl.8.8 i) of Cl.8(Basic or supplementary insulation > 0,4 mm (mm)*)	-	0	-
Cl.8.8 ii) of Cl.8(Reinforced insulation > 0,4 mm (mm) *)	-	0	-
Cl.8.8 iii) of Cl.8(Thin sheet material used inside the equipment)	-	0	-
Cl.8.8 iv) of Cl.8(Basic or supplementary insulation, atleast two layers, each meeting10.4)	-	0	-
Cl.8.8 v) of Cl.8(Basic or supplementary insulation, three layers any two of which meet10.4)	-	0	-
Cl.8.8 vi) of Cl.8(Reinforced insulation, two layers each of which meet 10.4)	-	0	-
Cl.8.9 of Cl.8(Adequate insulation between internal hazardous live conductors and accessible parts, or between internal hazardous live parts and conductors connected to accessible parts)	-	0	-
Cl.8.10 of Cl.8(Double insulation between accessible parts and conductors connected to the mains)	-	0	-
Cl.8.10 of Cl.8(Double insulation between conductors connected to accessible parts and parts connected to the mains)	-	0	-
Cl.8.11 of Cl.8(Detaching of wires)	-	0	-
Cl.8.11 i) of Cl.8(Noun due reduction of creepage or clearance distances if wires become detached)	-	0	-
Cl.8.11 ii) of Cl.8(Vibration test carried out)	-	0	-
Cl.8.12 of Cl.8(Adequate fastening of windows, lenses, lamp covers etc. (pull test 20 N for 10 s))	-	0	-
Cl.8.13 of Cl.8(Adequate fastening of windows, lenses, lamp covers etc. (pull test 20 N for 10 s))	-	0	-
Cl.8.14 of Cl.8(No risk of damage to the insulation of internal wiring due to hot parts or sharp edges)	-	0	-
Cl.8.15 of Cl.8(Only special supply equipment can be used*)	-	0	-
Cl.8.18 of Cl.8(Disconnection from the mains)	-	0	-
Cl.8.18 i) of Cl.8(Disconnect device used in apparatus)	-	0	-
Cl.8.18 ii) of Cl.8(All-pole switch or circuit breaker with >3mm contact separation.)	-	0	-
Cl.8.18 iii) of Cl.8(Mains switch ON indication *)	-	0	-
Cl.8.19 of Cl.8(Switch not fitted in the mains cord *)	-	0	-
Cl.8.20 of Cl.8(Bridging components comply with clause 14)	-	0	-
Cl.8.21 of Cl.8(Non-separable thin sheet material)	-	0	-
Cl.9.1 of Cl.9(Testing on the outside)	-	0	-
Cl.9.1.1 of Cl.9.1(Requirements)	-	0	-
Cl.9.1.1 i) of Cl.9.1(Accessible parts shall not be hazardous live)	-	0	-
Cl.9.1.1 ii) of Cl.9.1(Inaccessible terminals are not accessible or comply with relevant requirements)	-	0	-
Cl.9.1.1 iii) of Cl.9.1(For voltages >1000 V ac or >1500 V dc complies with clause 13.3.1 for basic insulation)	-	0	-
Cl.9.1.1.2 of Cl.9.1.1(Determination of hazardous live parts)	-	0	-
Cl.9.1.1.2 a) of Cl.9.1.1(Open circuit voltages)	-	0	-
Touch current measured from terminal devices using the network in annex D(Touch current measured from terminal devices using the network in annex D)	-	0	-
Cl.9.1.1.2 c) of Cl.9.1.1(The charge exceeds 45 μC)	-	0	-
Cl.9.1.1.2 d) of Cl.9.1.1(Energy of discharge not exceeding 350 mJ)	-	0	-
Cl.9.1.1.3 of Cl.9.1.1(Test with test finger and test probe)	-	0	-
Cl.9.1.2 of Cl.9.1(Shafts of operating knobs, handles, levers and the like)	-	0	-
Cl.9.1.3 of Cl.9.1(Openings ofthe enclosure)	-	0	-
Cl.9.1.4 of Cl.9.1(Terminals)	-	0	-
Cl.9.1.4 i) of Cl.9.1(Terminals)	-	0	-
Cl.9.1.4 ii) of Cl.9.1(Terminals)	-	0	-
Cl.9.1.5 of Cl.9.1(Pre-set controls)	-	0	-
Cl.9.1.6 of Cl.9.1(Withdrawal of the mains plug:)	-	0	-
Cl.9.1.6 i) of Cl.9.1(Withdrawal of the mains plug:)	-	0	-
Cl.9.1.6 ii) of Cl.9.1(Withdrawal of the mains plug:)	-	0	-
Cl.9.1.6 iii) of Cl.9.1(Withdrawal of the mains plug:)	-	0	-
Cl.9.1.7 of Cl.9.1(Resistance to external forces)	-	0	-
Cl.9.1.7 a) of Cl.9.1(Resistance to external forces)	-	0	-
Cl.9.1.7 b) of Cl.9.1(Resistance to external forces)	-	0	-
Cl.9.1.7 c) of Cl.9.1(Resistance to external forces)	-	0	-
Cl.9.2 of Cl.9(Removal of protective covers)	-	0	-
Cl.10.2 of Cl.10(Surge Test)	-	0	-
Cl.10.2 a) of Cl.10(Surge Test)	-	0	-
Cl.10.2 b) of Cl.10(Surge Test)	-	0	-
Cl.10.2 b) (i) of Cl.10(Surge Test)	-	0	-
Cl.10.2 b) (ii) of Cl.10(Surge Test)	-	0	-
Cl.10.2 b) (iii) of Cl.10(Surge Test)	-	0	-
Cl.10.3 of Cl.10(Humidity treatment)	-	0	-
Cl.10.4 of Cl.10(Insulation resistance and dielectric strength)	-	0	-
Cl.10.4.1 of Cl.10.4(Insulation of the insulating materials)	-	0	-
Cl.10.4.2 of Cl.10.4(Between parts of different polarity directly connected to the mains Between parts of different polarity directly connected to the mains)	-	0	-
Cl.10.4.2 i) of Cl.10.4(Between parts separated by BASIC or SUPPLEMENTARY insulation)	-	0	-
Cl.10.4.2 ii) of Cl.10.4(Between parts separated by REINFORCED insulation)	-	0	-
Cl.11.1 of Cl.11(Electric Shock Hazard)	-	0	-
Cl.11.1 a) of Cl.11(Electric Shock Hazard)	-	0	-
Cl.11.1 b) of Cl.11(Electric Shock Hazard)	-	0	-
Cl.11.2 of Cl.11(Heating)	-	0	-
Cl.11.2.1 of Cl.11.2(Requirements)	-	0	-
Cl.11.2.1 i) of Cl.11.2(No danger of fire to the surroundings)	-	0	-
Cl.11.2.1 ii) of Cl.11.2(Safety not impaired by abnormal heat)	-	0	-
Cl.11.2.1 of Cl.11.2(Flames extinguish within 10 seconds)	-	0	-
Cl.11.2.1 of Cl.11.2(No hazard from softening solder)	-	0	-
Cl.11.2.1 of Cl.11.2(Soldered terminations not used as protective mechanism)	-	0	-
Cl.11.2.2 of Cl.11.2(Measurement of temperature rises)	-	0	-
Cl.11.2.3 of Cl.11.2(Accessible parts)	-	0	-
Cl.11.2.4 of Cl.11.2(Parts, other than windings and printed boards, providing electrical insulation)	-	0	-
Cl.11.2.5 of Cl.11.2(Parts acting as a support or a mechanical barrier)	-	0	-
Cl.11.2.6 of Cl.11.2(Windings )	-	0	-
Cl.11.2.7 of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 i) of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 i) a) of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 i) b) of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 ii) of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 iii) of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.8 of Cl.11.2(Parts not subject to a limit under7.1.1 to 7.1.4)	-	0	-
Cl.12.1.1 of Cl.12.1(Requirements)	-	0	-
Cl.12.1.2 of Cl.12.1(Bump test )	-	0	-
Cl.12.1.3 of Cl.12.1(Vibration test)	-	0	-
Cl.12.1.4 of Cl.12.1(Impact test)	-	0	-
Cl.12.1.4 i) of Cl.12.1(Impact test)	-	0	-
Cl.12.1.4 ii) of Cl.12.1(Impact test)	-	0	-
Cl.12.1.5 of Cl.12.1(Drop test)	-	0	-
Cl.12.1.6 of Cl.12.1(Stress relief test)	-	0	-
Cl.12.2 of Cl.12(Fixing of actuating elements)	-	0	-
Cl.12.3 of Cl.12(Remote control devices held in hand)	-	0	-
Cl.12.4 of Cl.12(Drawers )	-	0	-
Cl.12.5 of Cl.12(Antenna coaxial sockets mounted on the apparatus)	-	0	-
Cl.12.5 a) of Cl.12(Endurance test,)	-	0	-
Cl.12.5 b) of Cl.12(Impact test,)	-	0	-
Cl.12.5 c) of Cl.12(Torque test)	-	0	-
Cl.12.6 of Cl.12(Telescoping or rod antennas)	-	0	-
Cl.12.6.1 of Cl.12.6(General requirements)	-	0	-
Cl.12.6.1 i) of Cl.12.6(General requirements)	-	0	-
Cl.12.6.2 of Cl.12.6(Physical securement)	-	0	-
Cl.12.7 of Cl.12(Apparatus containing coin / button cell batteries)	-	0	-
Cl.12.7.1 of Cl.12.7(Coin/button cell batteries with a diameter of 32 mm or less.)	-	0	-
Cl.12.7.2 of Cl.12.7(Construction requirementss)	-	0	-
Cl.12.7.3 of Cl.12.7(Tests)	-	0	-
Cl.12.7.3.2 of Cl.12.7.3(Stress relief test)	-	0	-
Cl.12.7.3.3 of Cl.12.7.3(Battery replacement test)	-	0	-
Cl.12.7.3.4 of Cl.12.7.3(Drop test)	-	0	-
Cl.12.7.3.5 of Cl.12.7.3(Impact test)	-	0	-
Cl.12.7.3.6 of Cl.12.7.3(Crush test)	-	0	-
Cl.12.7.4 of Cl.12.7(Compliance)	-	0	-
Cl.13.1 of Cl.13(General)	-	0	-
Cl.13.2 of Cl.13(Determination of Working voltage)	-	0	-
Cl.13.3 of Cl.13(Clearances)	-	0	-
Cl.13.3.1 of Cl.13.3(General)	-	0	-
Cl.13.3.2 of Cl.13.3(Clearances in circuits conductively connected to the mains)	-	0	-
Cl.13.3.3 of Cl.13.3(Clearances in circuits not conductively connected to the mains)	-	0	-
Cl.13.3.4 of Cl.13(Measurement of transient voltages)	-	0	-
Cl.13.4 a) of Cl.13(Creepage distances )	-	0	-
Cl.13.4 b) of Cl.13(Creepage distances )	-	0	-
Cl.13.4 c) of Cl.13(Creepage distances )	-	0	-
Cl.13.6 a) of Cl.13(Jointed insulation )	-	0	-
Cl.13.6 b) of Cl.13(Jointed insulation )	-	0	-
Cl.13.6 c) of Cl.13(Jointed insulation )	-	0	-
Cl.13.6 d) of Cl.13(Jointed insulation )	-	0	-
Cl.13.7 of Cl.13(Enclosed and sealed parts)	-	0	-
Cl.13.8 of Cl.13(Parts filled with insulating compound, meeting the requirements of 8.8)	-	0	-
Cl.15.1 of Cl.15(Plugs and Sockets*)	-	0	-
Cl.15.1.1 of Cl.15.1(Plugs and Sockets*)	-	0	-
Cl.15.1.1 i) of Cl.15.1(Plugs and Sockets*)	-	0	-
Cl.15.1.1 ii) of Cl.15.1(Plugs and Sockets*)	-	0	-
Cl.15.1.2 of Cl.15.1(Design of connectors other than for mains power *)	-	0	-
Cl.15.1.2 i) of Cl.15.1(Design of sockets with symbol of 5.3 b) design *)	-	0	-
Cl.15.1.3 of Cl.15.1(Design of terminals and connectors used in output circuits of supply apparatus*)	-	0	-
Cl.15.2 of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.2 i) of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.2 ii) of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.2 iii) of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.2 iv) of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.2 v) of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.3 of Cl.15(Terminals for external flexible cords and for permanent connection to the mains supply*)	-	0	-
Cl.15.3.1 of Cl.15.3(Adequate terminals for connection of permanent wiring*)	-	0	-
Cl.15.3.2 of Cl.15.3(Reliable connection of non-detachable cords)	-	0	-
Cl.15.3.2 i) of Cl.15.3(Not soldered to conductors of a printed circuit board)	-	0	-
Cl.15.3.2 ii) of Cl.15.3(Adequate clearances and creepage distances between connections should a wire break away)	-	0	-
Cl.15.3.2 iii) of Cl.15.3(Wire secured by additional means to the conductor)	-	0	-
Cl.15.3.3 of Cl.15.3(Screws and nuts clamping conductors have adequate threads: ISO 261, ISO 262 or similar*)	-	0	-
Cl.15.3.4 of Cl.15.3(Conductors adequately fixed (two independent fixings) *)	-	0	-
Cl.15.3.5 of Cl.15.3(Terminals allow connection of conductors having appropriate cross-sectional area)	-	0	-
Cl.15.3.6 of Cl.15.3(Terminals to 15.3.3 have sizes required by table 16)	-	0	-
Cl.15.3.7 of Cl.15.3(Terminals clamp conductors between metal and have adequate pressure)	-	0	-
Cl.15.3.7 i) of Cl.15.3(Terminals designed to avoid conductor slipping out when tightened)	-	0	-
Cl.15.3.7 ii) of Cl.15.3(Terminals adequately fixed when tightened or loosened (no loosening, wiring not stressed, distances not reduced))	-	0	-
Cl.15.3.8 of Cl.15.3(Terminals carrying a current more than)	-	0	-
Cl.15.3.8 i) of Cl.15.3(0.2 A, contact pressure not transmitted by insulating material except ceramic*)	-	0	-
Cl.15.3.9 of Cl.15.3(Termination of non-detachable cords: wires terminated near to each other)	-	0	-
Cl.15.3.9 i) of Cl.15.3(Terminals located and shielded: test with 8 mm strand)	-	0	-
Cl.15.4 of Cl.15(Devices forming a part of the mains plug*)	-	0	-
Cl.15.4.1 of Cl.15.4(No undue strain on mains socket-outlets.)	-	0	-
Cl.15.4.1 i) of Cl.15.4(Device shall be tested on the equipment as per Fig.11: Torque to be applied : 0.25 Nm (Max))	-	0	-
Cl.15.4.2 of Cl.15.4(Device complies with standard for dimensions of mains plugs)	-	0	-
Cl.15.4.3 of Cl.15.4(Device has adequate mechanical strength (tests a,b,c))	-	0	-
Cl.16.1 a) of Cl.16(Mains supply flexible cords shall be sheathed type, complying with IEC 60227 for PVC cords or as per IEC 60245 for synthetic rubber cords)	-	0	-
Cl.16.1 b) of Cl.16(Non-detachable cords for Class I have green/yellow core for protective earth)	-	0	-
Cl.16.2 of Cl.16(Mains cords conductors shall have a nominal cross-sectional area not less than the values given in Table 18, for rated current consumption of the apparatus)	-	0	-
Cl.16.3 a) of Cl.16(Flexiblecordsnotcomplyingwith16.1, used for interconnections between separate units of equipment used in combination and carrying hazardous live voltages, have adequate dielectric strength as perCl.10.3)	-	0	-
Cl.16.4 of Cl.16(Flexible cords used for connection between equipment have adequate cross-sectional areas to avoid temperature rise under normal and fault conditions)	-	0	-
Cl.16.5 a) of Cl.16(Adequate strain relief on external flexible cords)	-	0	-
Cl.16.5 b) of Cl.16(Not possible to push cord back into equipment)	-	0	-
Cl.16.5 c) of Cl.16(Strain relief device unlikely to damage flexible cord)	-	0	-
Cl.16.5 d) of Cl.16(For mains cords of Class I equipment, hazardous live conductors become taut before earth conductor)	-	0	-
Cl.16.6 of Cl.16(Apertures for external flexible cord: no risk of damage to the cord during assembly or movement in use)	-	0	-
Cl.16.7 a) of Cl.16(Transportable apparatus fitted with detachable cord sets with appliance inlet as perIEC60320-1 or)	-	0	-
Cl.16.7 b) of Cl.16(Transportable apparatus shall have a means of stowage to protect the cord)	-	0	-
17.1 a) of Cl.17(Screws are loosened and then tightened with a torque according to table20)	-	0	-
Cl.17.1 b) of Cl.17(5 times in the case of screws operating in a thread of metal)	-	0	-
Cl.17.1 c) of Cl.17(10 times in the case of screws operating in wood or in a thread in insulating material:)	-	0	-
Cl.17.2 of Cl.17(Correct introduction of screws into female threads in non-metallic material)	-	0	-
Cl.17.3 a) of Cl.17(Screws or other fixing devices intended to fix Covers, legs, stands or the like, shall be captive in order to prevent replacement during servicing by screws or other fixing devices……)	-	0	-
Cl.17.3 b) of Cl.17(Non-captive fixing screws: no hazard when replaced by a screw whose length is 10 times its diameter)	-	0	-
Cl.17.4 of Cl.17(No loosening of conductive parts carrying a current > 0.2 A)	-	0	-
Cl.17.5 of Cl.17(Contact pressure not transmitted through plastic other than ceramic for connections carrying a current > 0.2 A*)	-	0	-
Cl.17.6 of Cl.17(Stranded conductors of flexible supply cords carrying a current > 0.2 A with screw terminals not consolidated by solder *)	-	0	-
Cl.17.7 of Cl.17(Cover fixing devices other than screws have adequate strength and their positioning is unambiguous)	-	0	-
Cl.17.8 of Cl.17(Detachable legs or stands supplied by the manufacturer of the apparatus shall be delivered with the relevant fixing means *)	-	0	-
Cl.17.9 a) of Cl.17(Internal pluggable connections, affecting safety, unlikely to become disconnected)	-	0	-
Cl.17.9 b) of Cl.17(By applying a 2N pull force in any direction to the connection, in case of doubt)	-	0	-
Cl.19.1 of Cl.19(Stability and mechanical hazards)	-	0	-
Cl.19.1 of Cl.19(Stability requirements)	-	0	-
Cl.19.1 i) of Cl.19(Stability requirements)	-	0	-
Cl.19.2 of Cl.19(Test at 10° to the horizontal)	-	0	-
Cl.19.3 of Cl.19(Vertical force test )	-	0	-
Cl.19.4 of Cl.19(Horizontal force test)	-	0	-
Cl.19.5 of Cl.19(Test of edges and corners)	-	0	-
Cl.19.6 of Cl.19(Mechanical strength of glass)	-	0	-
Cl.19.6.1 of Cl.19.6(Requirements)	-	0	-
Cl.19.6.2 of Cl.19.6(Fragmentation test)	-	0	-
Cl.19.7 of Cl.19(Wall or ceiling mounting means)	-	0	-
Cl.19.7.1 of Cl.19..7(Requirements)	-	0	-
Cl.19.7.3 of Cl.19.7(Compliance)	-	0	-
Cl.20.1 of Cl.20(Requirements)	-	0	-
Cl.20.2 of Cl.20(Electrical components and mechanical parts)	-	0	-
Cl.20.2.1 a) of Cl.20.2(Exemption for components contained in an enclosure of material V-0 to IEC60695- 11-10 with openings not exceeding 1 mm in width)	-	0	-
Cl.20.2.1 b) of Cl.20.2(Exemption for small components)	-	0	-
Cl.20.2.2 of Cl.20.2(Electrical components )	-	0	-
Cl.20.2.3 of Cl.20.2(Internal wiring)	-	0	-
Cl.20.2.4 of Cl.20.2(Printed boards)	-	0	-
Cl.20.2.4 i) of Cl.20.2(Printed boards)	-	0	-
Cl.20.2.5 of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	0	-
Cl.20.2.5 i) of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	0	-
Cl.20.2.5 ii) of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	0	-
Cl.20.3 of Cl.20(Fire enclosure*)	-	0	-
Cl.20.3.1 of Cl.20.3(Fire enclosure*)	-	0	-
Cl.20.3.2 of Cl.20.3(Fire enclosure*)	-	0	-
Cl.20.3.3 of Cl.20.3(Fire enclosure*)	-	0	-

11 Mar, 2027

-
Included w.e.f. 11.06.2024 Exclusion: Cl.14 (Components), Cl.6.1 (Ionizing radiation), Cl. 6.2 (Laser Radiation), Cl. 8.16/ H 2.2/ H 2.3 (Requirements for insulated winding wires for use without additional interleaved insulation), Cl. 8.16 (Wound Component), Cl. 16.3b (Cord Bending Test), Cl. 18 (Mechanical strength of Picture tubes and protection against the effect of implosion), Cl. Cl.8.16 of Cl.8 (Insulated winding wire without additional interleaved insulation)

IS 15885 : Part 2 : Sec 13 (2012)

Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules

42000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	1000	-
8(Protection against accidental contact with live parts)	-	1500	-
9(Terminals)	-	1500	-
10(PROVISION FOR EARTHING)	-	1500	-
11(MOISTURE RESISTANCE)	-	2000	-
12(Electric Strength)	-	1500	-
13(Thermal endurance test for winding of ballasts)	-	0	-
14(Fault conditions)	-	2000	-
15(Transformer heating)	-	2000	-
16(Construction)	-	1000	-
17(Creepage distance and clearances)	-	2000	-
18(Screws, current carrying parts and connections)	-	2000	-
19(Resistance to heat, fire and tracking)	-	2000	-
20(Resistance to corrosion)	-	1000	-
7(Marking)	-	1000	-
8("PROTECTION AGAINST ACCIDENTAL CONTACT WITH LIVE PARTS")	-	1500	-
9(TERMINALS)	-	1500	-
10(PROVISIONS FOR PROTECTIVE EARTHING)	-	1500	-
11(MOISTURE RESISTANCE AND INSULATION)	-	2000	-
12(ELECTRIC STRENGTH)	-	1500	-
14(FAULT CONDITIONS)	-	2000	-
15(TRANSFORMER HEATING)	-	2000	-
16(CONSTRUCTION)	-	1000	-
17(CREEPAGE DISTANCES AND CLEARANCES)	-	2000	-
18("SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS")	-	2000	-
19(RESISTANCE TO HEAT, FIRE AND TRACKING)	-	2000	-
20(RESISTANCE TO CORROSION)	-	1000	-
4(GENERAL REQUIREMENTS)	-	0	-
5(GENERAL NOTES ON TESTS)	-	0	-
6(CLASSIFICATION)	-	0	-
19(Terminals)	-	0	-
7(Marking)	-	-	-
8(Protection against accidental contact with live parts)	-	-	-
9(Terminals)	-	-	-
10(PROVISION FOR EARTHING)	-	-	-
11(MOISTURE RESISTANCE)	-	-	-
12(Electric Strength)	-	-	-
13(Thermal endurance test for winding of ballasts)	-	-	-
14(Fault conditions)	-	-	-
15(Transformer heating)	-	-	-
16(Construction)	-	-	-
17(Creepage distance and clearances)	-	-	-
18(Screws, current carrying parts and connections)	-	-	-
19(Resistance to heat, fire and tracking)	-	-	-
20(Resistance to corrosion)	-	-	-
7(Marking)	-	-	-
8("PROTECTION AGAINST ACCIDENTAL CONTACT WITH LIVE PARTS")	-	-	-
9(TERMINALS)	-	-	-
10(PROVISIONS FOR PROTECTIVE EARTHING)	-	-	-
11(MOISTURE RESISTANCE AND INSULATION)	-	-	-
12(ELECTRIC STRENGTH)	-	-	-
14(FAULT CONDITIONS)	-	-	-
15(TRANSFORMER HEATING)	-	-	-
16(CONSTRUCTION)	-	-	-
17(CREEPAGE DISTANCES AND CLEARANCES)	-	-	-
18("SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS")	-	-	-
19(RESISTANCE TO HEAT, FIRE AND TRACKING)	-	-	-
20(RESISTANCE TO CORROSION)	-	-	-
4(GENERAL REQUIREMENTS)	-	-	-
5(GENERAL NOTES ON TESTS)	-	-	-
6(CLASSIFICATION)	-	-	-
19(Terminals)	-	-	-

11 Mar, 2027

-
Included w.e.f. 11.06.2024 Exclusion: Cl. 16 (Enclosures, (Bridging resistor in primary circuit, Capacitor and RC units, RF suppression (X-Y capacitors), Inductor, MOV/VDR, SMPS/Mains Transformer, PCB material, Insulated tape, Heat shrinkage sleeve, Connector, Fuse, Internal wire, LED, Opto-coupler, EMI/EMC filter, Winding wire, Thin sheet materials), Cl. 19 (Metal base PCB for LED, Transparent cover, Bobbin)

IS 16103 : Part 1 (2012)

Led modules for general lighting: Part 1 safety requirements

31500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	1000	-
8(Terminals)	-	3000	-
9(PROVISION FOR EARTHING)	-	2000	-
10(Protection against accidental contact with live parts)	-	2000	-
11(Mositure Resistance and Insulation)	-	3000	-
12(Electric Strength)	-	2000	-
13(Fault conditions)	-	4000	-
15(Construction)	-	2000	-
16(Creepage distance and clearances)	-	2000	-
17(Screws, current carrying parts and connections)	-	2500	-
18(Resistance to heat, fire and tracking)	-	4000	-
19(Resistance to corrosion)	-	3000	-
21(Heat management)	-	1000	-
21(Heat management)	-	0	-

11 Mar, 2027

-
Included w.e.f. 11.06.2024

IS 10322 : Part 5 : Sec 9 (2017)

Luminaires: Part 5 particular requirements: Sec 9 rope lights

48000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
21.4(General Test Requireements)	-	1000	-
21.5(Classification of Luminaires')	-	1000	-
21.6(Marking)	-	3000	-
21.7(Construction)	-	3000	-
21.8(Creepage Distance and Clearances)	-	4000	-
21.9(Provision for earthing)	-	0	-
21.10(Terminals)	-	4000	-
21.11(External & Internal Wiring)	-	4000	-
21.12(Protection against electric shock)	-	5000	-
21.13(Endurance Tests and Thermal Tests)	-	5000	-
21.14(Resistance to Dust & Moisture)	-	5000	-
21.15(Insulation Resistance and Electric Strength)	-	5000	-
21.16(Resistance to Heat , fire and tracking)	-	5000	-
21.7.1(General)	-	500	-
21.7.3(Terminals and supply connections)	-	500	-
21.7.4(Control units)	-	500	-
21.7.5(Mechanical strength)	-	1500	-

11 Mar, 2027

-
Included w.e.f. 11.06.2024

IS 10322 : Part 5 : Sec 7 (2017)

Luminaires: Part 5 particular requirements: Sec 7 lighting chains (First Revision)

48000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
20.4(General Test Requireements)	-	1000	-
20.5(Classification of Luminaires')	-	1000	-
20.6(Marking)	-	3000	-
20.7(Construction)	-	6000	-
20.8(Creepage Distance and Clearances)	-	4000	-
20.9(Provision for earthing)	-	0	-
20.10(Terminals)	-	4000	-
20.11(External & Internal Wiring)	-	4000	-
20.12(Protection against electric shock)	-	5000	-
20.13(Endurance Tests and Thermal Tests)	-	5000	-
20.14(Resistance to Dust & Moisture)	-	5000	-
20.15(Insulation Resistance and Electric Strength)	-	5000	-
20.16(Resistance to Heat , fire and tracking)	-	5000	-

11 Mar, 2027

-
Included w.e.f. 11.06.2024

IS 10322 : Part 5 : Sec 6 (2013)

Luminaires: Part 5 particular requirements: Sec 6 handlamps

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	1000	-
5(Classification of Luminaires')	-	1000	-
6.0(Marking)	-	3000	-
7.0(Construction)	-	6000	-
8.0(Creepage Distance and Clearances)	-	4000	-
10.0(Terminals)	-	4000	-
9.0(Provision for earthing)	-	0	-
11.0(External & Internal Wiring)	-	4000	-
12.0(Protection against electric shock)	-	4000	-
13.0(Endurance Tests and Thermal Tests)	-	5000	-
14.0(Resistance to Dust & Moisture)	-	4000	-
15.0(Insulation Resistance and Electric Strength)	-	4000	-
16.0(Resistance to Heat , fire and tracking)	-	5000	-
8.2(Packing -Each Package shall bear the following Particulars)	-	0	-
8.2(Packing -Each Package shall bear the following Particulars)	-	0	-

11 Mar, 2027

-
Included w.e.f. 11.06.2024

IS 10322 : Part 5 : Sec 1 (2012)

Luminaires: Part 5 particular requirements: Sec 1 fixed general purpose luminaires (First Revision)

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	1000	-
5(Classification of Luminaires')	-	1000	-
6.0(Marking)	-	2000	-
7.0(Construction)	-	5000	-
8.0(Creepage Distance and Clearances)	-	3000	-
9.0(Provision for earthing)	-	2000	-
10.0(Terminals)	-	3000	-
11.0(External & Internal Wiring)	-	3000	-
12.0(Protection against electric shock)	-	3000	-
13.0(Endurance Tests and Thermal Tests)	-	3000	-
14.0(Resistance to Dust & Moisture)	-	3000	-
15.0(Insulation Resistance and Electric Strength)	-	3000	-
16.0(Resistance to Heat , fire and tracking)	-	3000	-
4(General Test Requireements)	-	-	-
5(Classification of Luminaires')	-	-	-
6.0(Marking)	-	-	-
7.0(Construction)	-	-	-
8.0(Creepage Distance and Clearances)	-	-	-
9.0(Provision for earthing)	-	-	-
10.0(Terminals)	-	-	-
11.0(External & Internal Wiring)	-	-	-
12.0(Protection against electric shock)	-	-	-
13.0(Endurance Tests and Thermal Tests)	-	-	-
14.0(Resistance to Dust & Moisture)	-	-	-
15.0(Insulation Resistance and Electric Strength)	-	-	-
16.0(Resistance to Heat , fire and tracking)	-	-	-

11 Mar, 2027

-
Included w.e.f. 11.06.2024 Exclusion: Cl.17.0 (Photometric Test)

Bureau of Indian Standards

The National Standards Body of India

ABSOLUTE EXPERTISE TESTING LABORATORY LLP

PLOT NO.1, KH NO. 23/1, 1ST FLOOR, AMBEY GARDEN, VILLAGE LIBASPUR, NORTH WEST, DELHI-110042, NEW DELHI, North West, Delhi, 110042

7065432161 info.aetllab@gmail.com

Scope List