BIS - LIMS (Laboratory Information Management System)

ABSOLUTE EXPERTISE TESTING LABORATORY LLP

PLOT NO.1, KH NO. 23/1, 1ST FLOOR, AMBEY GARDEN, VILLAGE LIBASPUR, NORTH WEST, DELHI-110042, NEW DELHI, North West, Delhi, 110042

7065432161 info.aetllab@gmail.com

Scope List

Reset

41 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 16102 : Part 1 (2012)

Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	1000	-
6(Interchangeability)	-	2000	-
7(Protection against accidental contact with live parts)	-	2000	-
8(Insulation Resistance and Electric Strength)	-	2500	-
9(MECHANICAL STRENGTH)	-	2500	-
10(cap temperature)	-	2500	-
11(Resistance to Heat)	-	2000	-
12(Resistance to Flame and Ignition)	-	2000	-
13(Fault conditions)	-	2000	-
14(Creepage distance and clearances)	-	1500	-
4(General requirement and General test requirements)	-	0	-
5(Marking)	-	1000	-
6(Interchangeability)	-	2000	-
7(Protection against accidental contact with live parts)	-	2000	-
8(Strength after humidity treatment)	-	2500	-
9(Mechanical strength)	-	2500	-
10(Cap temperature rise)	-	2500	-
11(Resistance to heat)	-	2000	-
12(Resistance to flame and ignition)	-	2000	-
13(Fault conditions)	-	2000	-
14(Creepage distances and clearances)	-	1500	-
15(Selection of lamps for tests (Sampling))	-	0	-
16(Condition of compliance)	-	0	-
17(Tests)	-	0	-
Annex A(Ovreview of systems composed of LED modules and control gear)	-	0	-
Annex B(Lamps with operating position limitations)	-	0	-
4(GENERAL REQUIREMENT AND GENERAL TEST REQUIREMENTS)	-	0	-

11 Mar, 2027

-
Included w.e.f. 11.06.2024

IS 302 : Part 2 : Sec 15 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 15 appliances for heating liquids (First Revision)

19000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General requirements)	-	0	-
5(General Conditions of tests)	-	0	-
6.0(Classification)	-	500	-
7(Marking and instructions)	-	500	-
8(Protection against live parts)	-	1000	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	0	-
10(POWER INPUT AND CURRENT)	-	1000	-
11(HEATING)	-	1000	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	1000	-
14(TRANSIENT OVERVOLTAGES)	-	1000	-
15(MOISTURE RESISTANCE)	-	1000	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1000	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	500	-
18(ENDURANCE)	-	0	-
19(ABNORMAL OPERATION)	-	1000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	1000	-
21(MECHANICAL STRENGTH)	-	1000	-
22(CONSTRUCTION)	-	1000	-
23(INTERNAL WIRING)	-	500	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	1000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	500	-
27(PROVISION FOR EARTHING)	-	1000	-
28(SCREWS AND CONNECTIONS)	-	500	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	1000	-
30(RESISTANCE TO HEAT AND FIRE)	-	1000	-
31(RESISTANCE TO RUSTING)	-	1000	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	500	-
22.16(Automatic cord reel)	-	500	-
22.47(Water pressure inlet)	-	0	-
22.106(Interlocks)	-	500	-
22.3(Flexing test)	-	1000	-

11 Mar, 2027

IS 302 : Part 2 : Sec 6 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 6 cooking ranges, hobs, ovens and similar appliances (First Revision)

23000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Requirements)	-	0	-
5(General condition for the tests)	-	0	-
6.0(Classification)	-	500	-
7.0(Marking and instructions)	-	1000	-
8.0(Protection against access to live part test)	-	1000	-
9.0(Starting of motor-operated appliances test)	-	0	-
10.0(Power Input and current test)	-	1000	-
11.0(Heating test)	-	1000	-
13.0(Leakage current and electric strength test)	-	1000	-
14.0(Transient voltages)	-	1000	-
15.0(Moisture Resistance)	-	1000	-
16.0(Leakage current and electric strength test)	-	1000	-
17.0(Overload protection of transformers test)	-	1000	-
18.0(Endurance test)	-	0	-
19.0(Abnormal Operations)	-	1500	-
20.0(Stability and Mechanical Hazards)	-	1000	-
21.0(Mechanical Strength)	-	1000	-
22.0(Construction verification related tests)	-	2000	-
23.0(Internal wiring)	-	1000	-
25.0(Supply connections and External Flexible Cords)	-	1000	-
26.0(Terminal for External Conductors)	-	1000	-
27.0(Provision for Earthing)	-	1000	-
28.0(Screws and connections)	-	500	-
29.0(Clearances and Creepage distances and solid insulation)	-	1200	-
30.0(Resistance to heat and fire)	-	1000	-
31.0(Resistance to rusting)	-	1000	-
32.0(Radiation, Toxicity and Similar hazards)	-	1000	-

11 Mar, 2027

IS 8978 (1992)

Specification for electric instantaneous water heaters (Second Revision)

22300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(GENERAL REQUIREMENTS)	-	0	-
5(GENERAL NOTE ON TEST)	-	0	-
Cl.6 of IS 302-2-35:2017(Classification)	-	500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.8 of IS 302-2-35:2017(Protection Against Access To Live Parts)	-	1000	-
Cl.10 of IS 302-2- 35:2017(Power Input & Current )	-	1000	-
Cl.11 of 302-2-35:2017(Heating)	-	1500	-
Cl.13 of IS 302-2-35:2017(Leakage Current & Electrical Strength at Operating Temperature )	-	1000	-
Cl.14 of IS 302-2-35:2017(Transient Over Voltages )	-	1000	-
Cl.15 of IS 302-2-35:2017(Moisture Resistance )	-	1000	-
Cl.16 of IS 302-2-35:2017(Leakage Current and Electric Strength (After Humidity))	-	1000	-
Cl.17 IS 302-2-35:2017(Overload Protection of Transformers & Associated circuits )	-	1500	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	1500	-
Cl.20 of IS 302-2-35:2017(Stability & Mechanical Hazards )	-	500	-
Cl.21.1 of IS 302-2-35-2011(Mechanical strength)	-	1000	-
Cl. 21.2 of IS 302-1:2008(Mechanical strength)	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1500	-
Cl.23 of IS 302-2-35:2017(Internal Wiring)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	500	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	800	-
Cl.28 of IS 302-2-35:2017(Screws and Connections )	-	500	-
Cl.29 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation)	-	500	-
Cl.30 of IS 302-2-35: 2011(Resistance to Heat and Fire)	-	1000	-
Cl.31 of IS 302-2-35: 2017(Resistance to Rusting )	-	1000	-
Cl.32 of IS 302-2-35: 2011(Radiation, Toxicity and Similar Hazards )	-	500	-
Cl.10 of IS 8978 : 1992(Finish)	-	0	-
Cl.11 of IS 8978 : 1992(Operation of flow switch)	-	0	-
Cl.12 of IS 8978 : 1992(Endurance)	-	0	-
Cl.6 of IS 302-2-35:2017(Classification)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.10 of IS 302-2- 35:2011(Power Input & Current )	-	0	-
Cl.11 of 302-2-35:2017(Heating)	-	0	-
Cl.11 of 302-2-35:2017(Heating)	-	0	-
Cl.11 of 302-2-35:2017(Heating)	-	0	-
Cl.13 of IS 302-2-35:2017(Leakage Current & Electrical Strength at Operating Temperature )	-	0	-
Cl.15 of IS 302-2-35-2011(Moisture Resistance )	-	0	-
Cl.15 of IS 302-2-35-2011(Moisture Resistance )	-	0	-
Cl.16 of IS 302-2-35:2011(Leakage Current and Electric Strength)	-	0	-
Cl.16 of IS 302-2-35:2011(Leakage Current and Electric Strength)	-	0	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	0	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	0	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	0	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	0	-
Cl.20 of IS 302-2-35-2011(Stability & Mechanical Hazards )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	0	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	0	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	0	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	0	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	0	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	0	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	0	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	0	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	0	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	0	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	0	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	0	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	0	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	0	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	0	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	0	-
Cl.28 of IS 302-2-35:2017(Screws and Connections )	-	0	-
Cl.29 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation)	-	0	-
Cl.29 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation)	-	0	-
Cl.30 of IS 302-2-35: 2011(Resistance to Heat and Fire)	-	0	-
Cl.31 of IS 302-2-35: 2011(Resistance to Rusting )	-	0	-
Cl.12 of IS 8978 : 1992(Endurance)	-	0	-
Cl.10 of IS 8978 : 1992(Finish)	-	0	-
Cl.30.2 of IS 302-1:2008(Resistance to Heat and Fire)	-	0	-
Cl.30.1 of IS 302-1:2008(Resistance to Heat and Fire)	-	0	-
Cl.29.2 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation : Creepage distance )	-	0	-
Cl.29.1 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation : Clearance distance )	-	0	-
Cl.27.5 of IS 302-2-35:2017(Provision for Earthing : ECR )	-	0	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	0	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	0	-
Cl.25.18 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25.15 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Cord grip test - displacement )	-	0	-
Cl.25.15 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Cord grip test )	-	0	-
Cl.25.12 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Moulding of supply cord )	-	0	-
Cl.25.10 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Colour of Earthing conductor )	-	0	-
Cl.25.8 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Resistance of supply cord )	-	0	-
Cl.25.5 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Type of attachment )	-	0	-
Cl.25.1 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : connection to the supply mains)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.23 of IS 302-2-35:2017(Internal Wiring ; Colour of earthing conductor)	-	0	-
Cl.22.110 of IS 302-2-35:2017(Construction : Provision for fixing to wall )	-	0	-
Cl.22.109 of IS 302-2-35:2017(Construction : Operation of presure switch of open outlet water heater )	-	0	-
Cl.22.108 of IS 302-2-35:2017(Construction : Temperature of outlet water intended to supply for showring )	-	0	-
Cl.22.107 of IS 302-2-35:2017(Construction : Temperature of outlet )	-	0	-
Cl.22.106 of IS 302-2-35:2017(Construction : Operation of thermal cut out for closed water heater )	-	0	-
Cl.22.104 of IS 302-2-35:2017(Construction : Pressure in open outlet water heaters )	-	0	-
Cl.22.103 of IS 302-2-35:2017(Construction : Pressure relief device operation for closed water heater )	-	0	-
Cl.22.102 of IS 302-2-35:2017(Construction : excessive temperature of outlet )	-	0	-
Cl.22.101 of IS 302-2-35:2017(Construction : Rated pressure of closed water heater )	-	0	-
Cl.22.47 of IS 302-2-35:2017(Construction : Water pressure test )	-	0	-
Cl.22.44 of IS 302-1:2008(Construction : Shape and decoration )	-	0	-
Cl.22.34, Cl 22.35 of IS 302-1:2008(Construction : Shaft of operating Knobs )	-	0	-
Cl.22.33 of IS 302-1:2008(Construction : Direct contact of liquids )	-	0	-
Cl 22.26 ,Cl.22.28, Cl 22.29, Cl 22.30 , Cl 22.31, Cl 22.32 of IS 302-1:2008(Construction : Supplymentry/ double / reinforced insulation for Class II/ Class III appliance )	-	0	-
Cl.22.18 of IS 302-1:2008(Construction : Resistance to corrosion )	-	0	-
Cl.22.17 of IS 302-1:2008(Construction : Spacers )	-	0	-
Cl.22.14 of IS 302-1:2008(Construction : Ragged or sharp edges )	-	0	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knob, grips, levers and similar parts )	-	0	-
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable parts )	-	0	-
Cl.22.7 of IS 302-1:2008(Construction : safeguards against the risk of excessive pressure. )	-	0	-
Cl.22.6 of IS 302-2-35:2017(Construction : size of drain hole )	-	0	-
Cl.22.6 of IS 302-1:2008(Construction : effect of water on 3 insulation )	-	0	-
Cl.22.2 of IS 302-1:2008(Construction : connection to supply mains )	-	0	-
Cl.22.1 of IS 302-1:2008(Construction : IP test )	-	0	-
Cl. 21.2 of IS 302-1:2008(Mechanical strength : prevent penetration by sharp implements. )	-	0	-
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	0	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : effect on container)	-	0	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : High voltage)	-	0	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : Temperature rise of insulation of supply cord)	-	0	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : Temperature rise of test corner)	-	0	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : Emission of flames, molten metal ,or poisonous or ignitable gas)	-	0	-
Cl.16 of IS 302-2-35:2017(Leakage Current and Electric Strength (After Humidity))	-	0	-
Cl.14 of IS 302-2-35:2017(Transient Over Voltages )	-	0	-
Cl.13 of IS 302-2-35:2017(Leakage Current & 3 Strength at Operating Temperature : High voltage )	-	0	-
Cl.13 of IS 302-2-35:2017(Leakage Current & 3 Strength at Operating Temperature )	-	0	-
Cl.11 of 302-2-35:2017(Heating : room temperature)	-	0	-
Cl.11 of 302-2-35:2017(Heating : Insulation of supply cord)	-	0	-
Cl.11 of 302-2-35:2017(Heating : Temperature rise of test corner)	-	0	-
Cl.8 of IS 302-2-35:2017(Protection Against Access To Live Parts)	-	0	-
Cl.7.102 of IS 302-2-35:2017(Marking : Standard mark)	-	0	-
Cl.7.101 of IS 302-2-35:2017(Marking : Woter inlet and outlet idetification)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking : Position of marking)	-	0	-
Cl.7.14 of IS 302-1:2008(Marking ; Legibility and durability)	-	0	-
Cl.7.13 of IS 302-1:2008(Marking : Language)	-	0	-
Cl.7.10 & 7.11 of IS 302-1:2008(Marking : Indication for direction of control)	-	0	-
Cl.7.8 of IS 302-1:2008(Marking : Terminal for connection )	-	0	-
Cl.7.6 of IS 302-1:2008(Marking : Symbols)	-	0	-
Cl.7.1 of IS 302-2-35:2017(Marking : rated pressure)	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : Country of manufacture)	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : IP number )	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : Symbol for class II)	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : Molel or type)	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : Manufacture identification)	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : Rated power input)	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : Nature of supply)	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : Rated Voltage)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-

11 Mar, 2027

-
Exclusion: Cl.24 (Components Test)

IS 302 : Part 2 : Sec 35 (2017)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 35 electric instantaneous water heaters (Second Revision)

17500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(GENERAL REQUIREMENT)	-	0	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-
Cl. 6 IS 302-2-35(Classification)	-	500	-
Cl. 7 IS 302-2-35(Marking and Instruction)	-	500	-
Cl. 8 IS 302-2-35(Protection against access to live parts)	-	1000	-
Cl. 9 IS 302-2-35(Starting of motor operated appliances)	-	0	-
Cl. 10 IS 302-2-35(Power Input and Current )	-	1000	-
Cl. 11 IS 302-2-35(Heating)	-	1000	-
Cl. 13 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature)	-	1000	-
Cl. 14 IS 302-2-35(Radio and television interference suppression / Transient over voltages)	-	1000	-
Cl. 15 IS 302-2-35(Moisture Resistance Test )	-	1000	-
Cl. 16 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	1000	-
Cl. 17 IS 302-2-35(Overload Protection of Transformers and Associated Circuit)	-	1000	-
Cl. 18 IS 302-2-35(Endurance)	-	0	-
Cl. 19 IS 302-2-35(Abnormal Operation )	-	1000	-
Cl. 20 IS 302-2-35(Stability & Mechanical Hazards)	-	1000	-
Cl. 21 IS 302-2-35(Mechanical strength)	-	1000	-
Cl. 22 IS 302-2-35(Construction )	-	1000	-
Cl. 23 IS 302-2-35(Internal Wiring)	-	500	-
Cl. 25 IS 302-2-35(Supply Connection & External Flexible Cords)	-	1000	-
Cl. 26 IS 302-2-35(Terminals for External conductors )	-	500	-
Cl. 27 IS 302-2-35(Provision for Earthing )	-	1000	-
Cl. 28 IS 302-2-35(Screws & Connections)	-	500	-
Cl. 29 IS 302-2-35(Clearances, Creepage Distances & Solid insulation )	-	500	-
Cl. 30 IS 302-2-35(Resistance to Heat Fire & Tracking )	-	1000	-
Cl. 31 IS 302-2-35(Resistance to Rusting)	-	1000	-
Cl. 32 IS 302-2-35(Radiation, Toxicity and similar hazards)	-	500	-
Cl. 7(Verification)	-	0	-
Cl. 7(Verification)	-	0	-
Cl.8(Verification)	-	0	-
Cl.10(Verification)	-	0	-
Cl.11(Verification)	-	0	-
Cl.13(Verification)	-	0	-
Cl.14(Verification)	-	0	-
Cl.15(Verification)	-	0	-
Cl. 16(Verification)	-	0	-
Cl.17(Verification)	-	0	-
Cl.19(Verification)	-	0	-
Cl.20(Verification)	-	0	-
Cl.21(Verification)	-	0	-
Cl.22(Verification)	-	0	-
Cl.23(Verification)	-	0	-
Cl.24(Verification)	-	0	-
Cl.25(Verification)	-	0	-
Cl.26(Verification)	-	0	-
Cl.27(Verification)	-	0	-
Cl.28(Verification)	-	0	-
CL.29(Verification)	-	0	-
Cl.30(Verification)	-	0	-
Cl.31(Verification)	-	0	-
Cl.32(Verification)	-	0	-

11 Mar, 2027

-
(Electrostatic discharges), Cl. 19.11.4.2 (Radiated fields), Cl. 19.11.4.3 (Fast transient bursts), Cl. 19.11.4.4 (Surge immunity test), Cl. 19.11.4.5 (Immunity to conducted discharges), Cl. 19.11.4.6 (Class 3 Voltage dips and interruptions), Cl. 19.11.4.7 (Harmonics), Cl.24 (Components Test)

IS 2082 (2018)

Stationary storage type electric water heaters - Specification (Fifth Revision)

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(GENERAL REQUIREMENT)	-	0	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-
6(Classification )	-	200	-
7(Marking)	-	500	-
Cl.8 of IS 302-2-21:2018(Protection Against Access to Live Parts)	-	500	-
Cl.10 of IS 302-2-21: 2018(Power Input & Current)	-	1000	-
Cl.11 of 302-2-21:2018(Heating : Temp of Walls, ceilings and floor of the test corner )	-	1000	-
Cl.13 of IS 302-2-21:2018(Leakage Current )	-	500	-
Cl.13 of IS 302-2-21:2018(3 Strength at Operating Temperature)	-	500	-
Cl.14 of IS 302-2-21:2018(Transient Over Voltages)	-	1000	-
Cl.15 of IS 302-2-21-2018(Moisture Resistance)	-	1000	-
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Leakage current )	-	500	-
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	500	-
(Cl.17 of IS 302-2-21:2011)(Overload protection of transformers & associated circuits)	-	1500	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Wall ceiling temp. of test corner )	-	1500	-
(Cl.20 of IS 302-2-21:2011)(Stability & Mechanical Hazards)	-	500	-
(Cl.21ofIS302-2-21:2011)(Mechanical strength)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
Cl.25 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : connection to the supply mains)	-	500	-
Cl.25.8 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : Resistance of supply cord )	-	500	-
Cl.26 of IS 302-2-21: 2018(Terminals for External Conductors)	-	500	-
Cl.27 of IS 302-2-21:2018(Provision for Earthing)	-	500	-
Cl.28 of IS 302-2-21:2018(Screws & Connections)	-	500	-
(Cl.29ofIS302-2-21:2011)(Clearances, Creepage Distances and Solid Insulation)	-	500	-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	1500	-
Cl.31 of IS 302-2-21:2018(Resistance to Rusting)	-	1000	-
Cl.32 of IS 302-1:2008()	-	500	-
12(THERMOSTAT SETTING)	-	1500	-
(Cl.15 of IS 2082:2018)(Verification of the Rated Capacity)	-	200	-
(Cl.16 of IS 2082:2018)(Standing Loss per 24 Hours)	-	5000	-
(Cl.17 of IS 2082:2018)(Hot Water Output)	-	300	-
(Cl.18 of IS 2082:2018)( Reheating Time)	-	500	-
(Cl.19 of IS 2082:2018)(Mixing Factor)	-	300	-
(Cl.20 of IS 2082:2018)(Deviation of Dial Calibration)	-	500	-
(Cl.21 of IS 2082:2018)(Cyclic Temperature Variation)	-	250	-
(Cl.22 of IS 2082:2018)(Finish)	-	250	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
(Cl.8 of IS 302-2-21:2011)(Protection Against Access to Live Parts)	-	0	-
(Cl.10 of IS 302-2-21: 2011)(Power Input & Current)	-	0	-
(Cl.11 of 302-2-21:2011)(Heating)	-	0	-
(Cl.11 of 302-2-21:2011)(Heating)	-	0	-
(Cl.11 of 302-2-21:2011)(Heating)	-	0	-
Cl.11 of 302-2-21:2018(Heating : Temp of Rubber or PVC insulation of internal and external wiring)	-	0	-
Cl.11 of 302-2-21:2018(Heating : Room Temp.)	-	0	-
(Cl.13 of IS 302-2-21:2011)(Leakage Current )	-	0	-
(Cl.13 of IS 302-2-21:2011)(Electrical Strength at Operating Temperature)	-	0	-
(Cl.14ofIS302-2-21:2011)(Transient Over Voltages)	-	0	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	0	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	0	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	0	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	0	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	0	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	0	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	0	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : emission of flame or molten metal or poisonous or ignitable gas )	-	0	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Insulation of the supply cable or cord)	-	0	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : High Voltage )	-	0	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : leakage from container during test)	-	0	-
Cl.20 of IS 302-1:2008(Stability & Mechanical Hazards)	-	0	-
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	0	-
Cl.21.2 of IS 302-1:2008(Mechanical strength : prevent penetration by sharp implements. )	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
Cl.22.1 of IS 302-1:2008(Construction : IP test )	-	0	-
Cl.22.2 of IS 302-1:2008(Construction : Provision to ensure all pole disconnection )	-	0	-
Cl.22.6 of IS 302-1:2008(Construction : Effect of water on 3 insulation )	-	0	-
Cl.22.6 of IS 302-2-21:2018(Construction : Size of drain hole )	-	0	-
Cl.22.7 of IS 302-1:2008(Construction: adequate safeguards against the risk of excessive pressure)	-	0	-
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable part )	-	0	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knob, grips, levers and similar parts)	-	0	-
Cl.22.14 of IS 302-1:2008(Construction : ragged or sharp edges)	-	0	-
Cl.22.17 of IS 302-1:2008(Construction : Spacers )	-	0	-
Cl.22.18 Of IS 302-1:2008(Construction : Resistance to corrosion )	-	0	-
Cl 22.26 ,Cl.22.28, Cl 22.29, Cl 22.30 , Cl 22.31, Cl 22.32 of IS 302-1:2008(Construction : Supplymentry/ double / reinforced insulation for Class II/ Class III appliance )	-	0	-
Cl.22.33 of IS 302-1:2008(Construction : Direct contact of liquids )	-	0	-
Cl.22.34, Cl 22.35 of IS 302-1:2008(Construction : Shaft of operating Knobs )	-	0	-
Cl.22.44 of IS 302-1:2008(Construction : Shape and decoration of enclosure)	-	0	-
Cl.22.47 of IS 302-2-21:2018 (Construction : Water pressure test )	-	0	-
Cl.22.101 of IS 302-2-21:2018(Construction : rated pressure of closed water heater )	-	0	-
Cl.22.102 of IS 302-2-21:2018(Construction : repeated drawing of water temp )	-	0	-
Cl.22.103 of IS 302-2-21:2018(Construction : Operation of Pressure relieve devices )	-	0	-
Cl.22.104 of IS 302-2-21:2018(Construction : Outlet of open outlet heater )	-	0	-
Cl.22.106 of IS 302-2-21:2018(Construction : Operation of thermal cut- out )	-	0	-
Cl.22.107 of IS 302-2-21:2018(Construction : Position of Heating elements and thermal control sensor)	-	0	-
Cl.22.108 of IS 302-2-21:2018(Construction : fixing to wall )	-	0	-
Cl.22.109 of IS 302-2-21:2018(Construction : Drain for appliance having a capacity of more than 15 liter)	-	0	-
Cl.22.110 of IS 302-2-21:2018(Construction : Material of Inner conatiner )	-	0	-
Cl.22.110 of IS 302-2-21:2018(Construction : meterial of connections )	-	0	-
Cl.22.111 of IS 302-2-21:2018(Construction : Resistance to vacuum )	-	0	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	-
Cl. 23 of IS 302-1:2008(Internal Wiring )	-	0	-
Cl. 23 of IS 302-1:2008(Internal Wiring : color identification for earthing conductor )	-	0	-
Cl.25.5 of IS 302-1:2008(Supply Connection & External Flexible Cords : Type of attachment )	-	0	-
Cl.25.10 of IS 302-1:2008(Supply Connection & External Flexible Cords : Colour of Earthing conductor )	-	0	-
Cl.25.12 of IS 302-1:2008(Supply Connection & External Flexible Cords : Moulding of supply cord )	-	0	-
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test )	-	0	-
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test - displacement )	-	0	-
Cl.25.18 of IS 302-1:2008(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
Cl.27.5 of IS 302-1:2008(Provision for Earthing : ECR )	-	0	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	0	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	0	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	0	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	0	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	0	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	0	-
(Cl.28 of IS 302-2-21:2011)(Screws & Connections)	-	0	-
Cl.29.1 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance distance )	-	0	-
Cl.29.2 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage distance )	-	0	-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	0	-
Cl.30.1 of IS 302-1:2008(Resistance to Heat & Fire : Ball pressure test )	-	0	-
Cl.30.2 of IS 302-1:2008(Resistance to Heat & Fire : Glow wire test )	-	0	-
(Cl.31 of IS 302-2-21:2011)(Resistance to Rusting)	-	0	-
Cl.15 of IS 2082:2018(Verification of the Rated Capacity)	-	0	-
Cl.16 of IS 2082:2018(Standing Loss per 24 Hours)	-	0	-
Cl.17 of IS 2082:2018(Hot Water Output)	-	0	-
Cl.18 of IS 2082:2018( Reheating Time)	-	0	-
Cl.19 of IS 2082:2018(Mixing Factor)	-	0	-
Cl.20 of IS 2082:2018(Deviation of Dial Calibration)	-	0	-
Cl.21 of IS 2082:2018(Cyclic Temperature Variation)	-	0	-
Cl.22 of IS 2082:2018(Finish)	-	0	-
7.1(Marking : Rated Voltage )	-	0	-
7.1(Marking : Symbol for nature of supply )	-	0	-
7.1(Marking : Rated power input)	-	0	-
7.1(Marking: Name, trademark or identification mark of manufacturer )	-	0	-
7.1(Marking: Model or type reference)	-	0	-
7.1(Marking: Symbol for Class II)	-	0	-
7.1(Marking: IP Number)	-	0	-
7.1(Marking : Country of manufacture)	-	0	-
7.1(Marking : Rated pressure)	-	0	-
7.1(Marking : Rated capacity)	-	0	-
7.1(Marking : Statement for a pressure-relief device)	-	0	-
7.1(Marking : Statement for pressure reducing valve ( For rated pressure less than 0.6 MPa))	-	0	-
7.1(Marking : Warning for Open- outlet )	-	0	-
7.6(Marking : Symbol used )	-	0	-
7.8(Marking : Terminals )	-	0	-
7.11(Marking : Indication of controls )	-	0	-
7.13(Marking : Official language of Instruction )	-	0	-
7.14(Marking : Legibility and durability)	-	0	-
7.101(Marking : Indifiction of water inlet and water outlet )	-	0	-
6(Classification )	-	0	-
Cl.24.101 of IS302-221:2018(Component : Location of non self reseting thermal cut out )	-	400	-
Cl.24.102 of IS 302-221:2018(Component : Operation of thermal cut-out )	-	600	-

11 Mar, 2027

-
Exclusion: Cl. 24 (Components)

IS 302 : Part 2 : Sec 21 (2018)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 21 stationary storage type electric water heaters (Second Revision)

16500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(GENERAL REQUIREMENTS)	-	0	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-
6.0(Classification)	-	500	-
7.0(Marking and Instructions)	-	500	-
8.0(Protection against access to live parts)	-	1000	-
10.0(Input and Current)	-	1000	-
11.0(Heating)	-	1000	-
13.0(Leakage Current and electric strength at operating temperature)	-	1000	-
14.0(Transient Overvoltage)	-	1000	-
15.0(Moisture resistance)	-	1000	-
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	1000	-
17.0(Overload Protection of transformer and associated circuit)	-	500	-
19.0(Abnormal Operation)	-	1000	-
20.0(Stability and mechanical hazards)	-	1000	-
21.0(Mechanical Strength)	-	1000	-
22.0(Construction)	-	1000	-
23.0(Internal Wiring)	-	500	-
25.0(Supply Connection and External Flexible Cords)	-	1000	-
26.0(Terminals for external conductors)	-	500	-
27.0(Provision For Earthing)	-	1000	-
28.0(Screws and Connections)	-	500	-
29.0(Creepage Distances and Clearances)	-	1000	-
30.0(Resistance To Heat and Fire)	-	1000	-
31.0(Resistance To Rusting)	-	1000	-
32(RADIATION TOXICITY AND SIMILAR HAZARDS)	-	1000	-

11 Mar, 2027

IS 4159 (2021)

Mineral Filled Sheathed Heating Elements

22500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
"Cl. 6 IS 4159:2021"(Classification)	-	500	-
"Cl. 8 IS 4159:2021"(Protection against access to live parts)	-	1000	-
"Cl. 9 IS 4159:2021"(Starting of motor operated appliances)	-	0	-
"Cl. 10 IS 4159:2021"(Power Input and Current)	-	1000	-
"Cl. 11 IS 4159:2021"(Heating)	-	1000	-
"Cl. 13 IS 4159:2021"(Leakage Current & Electrical Strength at Operating Temperature)	-	1000	-
"Cl. 14 IS 4159:2021"(Transient Over Voltage)	-	1000	-
"Cl. 15 IS 4159:2021"(Moisture Resistance)	-	1000	-
"Cl. 16 IS 4159:2021"(Leakage Current and Electric strength)	-	1000	-
"Cl. 17 IS 4159:2021"(Overload protection of transformers and associated circuits.)	-	1000	-
"Cl. 18 IS 4159:2021"(Endurance)	-	0	-
"Cl. 19 IS 4159:2021"(Abnormal Operation)	-	1000	-
"Cl. 20 IS 4159:2021"(Stability and mechanical Hazards)	-	500	-
"Cl. 21 IS 4159:2021"(Mechanical Strength)	-	1000	-
"Cl. 22 IS 4159:2021"(Construction)	-	1000	-
"Cl. 23 IS 4159:2021"(Internal Wiring)	-	500	-
"Cl. 25 IS 4159:2021"(Supply Connections and External Flexible Cables and Cords)	-	1000	-
"Cl. 26 IS 4159:2021"(Terminal For External Conductors)	-	1000	-
"Cl. 27 IS 4159:2021"(Provision For Earthing)	-	1000	-
"Cl. 28 IS 4159:2021"(Screws and Connections)	-	1000	-
"Cl. 29 IS 4159:2021"(Creepage Distances, Clearances And Distances Through Insulation)	-	1000	-
"Cl. 30 IS 4159:2021"(Resistance To Heat, Fire And Tracking)	-	1000	-
"Cl. 31 IS 4159:2021"(Resistance To Rusting)	-	1000	-
"Cl. 102 IS 4159:2021"(Leakage and hydrostatic strength (for oil heating elements))	-	1000	-
Cl.22.106(CONSTRUCTION)	-	1000	-

11 Mar, 2027

-
Exclusion: Cl. 24(Components Test), EMI/EMC (Cl.19.11.4.1 to 19.11.4.7)

IS 368 (2014)

Electric immersion water heaters - Specification (Fifth Revision)

20200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 of IS 302-‐2-‐201:2008(Classification)	-	200	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.8 of IS 302‐2-201: 2008(Protection Against Access to Live Parts)	-	1000	-
Cl.10 of IS 302‐2‐201:2008(Power Input and Current )	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl. 12 of IS 368:2014(Operation under overload conditions of appliances with heating elements)	-	1000	-
Cl.13 of IS 302-2-201: 2008(Leakage Current & Electric Strength at Operating Temperature)	-	1000	-
Cl.14 of IS 302‐2-201:2008(Transient Over Voltages )	-	1000	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	1000	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	1000	-
Cl.17 of IS 302‐2-201: 2008(Overload Protection of Transformers & Associated Circuits)	-	800	-
Cl.18 of IS 368:2014(Endurance)	-	1200	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.20 of IS 302-2-201: 2008(Stability & Mechanical Hazards)	-	500	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	1000	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	500	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	500	-
Cl.26 of IS 302-2-201: 2008(Terminals for External Conductors)	-	500	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.28 of IS 302-2-201: 2008(Screws & Connections )	-	500	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	1000	-
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	1000	-
Cl.31 of IS 302-2-201:2008(Resistance of Rusting )	-	500	-
Cl.32 of IS 302-2-201:2008(Radiation, Toxicity and Similar Hazards)	-	500	-
4(GENERAL REQUIREMENT)	-	0	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.13 of IS 302-2-201: 2009(Leakage Current & Electric Strength at Operating Temperature)	-	0	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	0	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	0	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	0	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	0	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	0	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	0	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	0	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	0	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	0	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	0	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	0	-
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	0	-

11 Mar, 2027

IS 302 : Part 2 : Sec 201 (2008)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 201 electric immersion water heaters (First Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 of IS 302-‐2-‐201:2008(Classification)	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.8 of IS 302‐2-201: 2008(Protection Against Access to Live Parts)	-	1000	-
Cl.10 of IS 302‐2‐201:2008(Power Input and Current )	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.13 of IS 302-2-201: 2008(Leakage Current & Electric Strength at Operating Temperature)	-	1000	-
Cl.14 of IS 302‐2-201:2008(Transient Over Voltages )	-	1000	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	1000	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	1000	-
Cl.17 of IS 302‐2-201: 2008(Overload Protection of Transformers & Associated Circuits)	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.20 of IS 302-2-201: 2008(Stability & Mechanical Hazards)	-	1000	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	1000	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	500	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	500	-
Cl.26 of IS 302-2-201: 2008(Terminals for External Conductors)	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.28 of IS 302-2-201: 2008(Screws & Connections )	-	500	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	1000	-
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	1000	-
Cl.31 of IS 302-2-201:2008(Resistance of Rusting )	-	500	-
Cl.32 of IS 302-2-201:2008(Radiation, Toxicity and Similar Hazards)	-	500	-
4(GENERAL REQUIREMENTS)	-	0	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	0	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	0	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	0	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	0	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	0	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	0	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-

11 Mar, 2027

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	500	-
8.1.1(Protection against live parts in all positions)	-	500	-
8.1.2(Protection against live parts in openings)	-	500	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	500	-
8.1.4(Protection against live parts against protective impedance)	-	500	-
10.1(Power input)	-	1000	-
10.2(Current input)	-	1000	-
11.1(General)	-	500	-
11.2(General)	-	500	-
11.3(Heating)	-	500	-
13.1(General)	-	1000	-
13.2(Leakage current at operating temperature)	-	1000	-
13.3(Electric Strength at operating temperature)	-	1000	-
14(Transient Over Voltages)	-	1000	-
15.0(General)	-	3000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	3000	-
15.2(Spillage Test)	-	1000	-
15.3(Humidity Test)	-	1500	-
16.0(General)	-	1000	-
16.1(General)	-	1000	-
16.2(Leakage Current (after Clause 15))	-	1000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	1000	-
17(Over Load Protection of Transformers and associated circuits)	-	1000	-
18(Endurance Test requirements and tests)	-	0	-
19(Abnormal Operation)	-	2000	-
20(Stability test)	-	1000	-
21(Mechanical Strength Test)	-	2000	-
22(Construction verification related test)	-	2000	-
23(General)	-	500	-
25(Supply connection and external flexible cords)	-	1000	-
26(Terminals for external conductors)	-	1000	-
27(Provision for earthing)	-	1000	-
28(Screw test and connections)	-	1000	-
29(clearance, creepage distances and solid insulation)	-	1000	-
30.1(Ball pressure test)	-	1000	-
30.2(Glow Wire Test)	-	1000	-
30.2(Needle Flame Test)	-	1000	-
31(Resistance to Rusting)	-	1000	-
32(Radiation Toxicity and Similar Hazards)	-	500	-
4(General Requirement)	-	0	-
5(General conditions for tests)	-	0	-
6(Classification- IS 302-1)	-	500	-
9(Starting of motor operation test requirements and tests)	-	0	-
8.1.5(Live parts of built-in appliances)	-	500	-
11.4(Heating appliances)	-	500	-
11.5(Motor-operated appliances)	-	500	-
11.6(Combined appliances)	-	500	-
11.7(Duration corresponding)	-	500	-
11.8(Temperature rise)	-	500	-
16(Leakage current and electric strength)	-	500	-
4(General requirement)	-	0	-
17(Overload protection of transformers and associated circuits)	-	500	-
18(Endurance)	-	0	-

11 Mar, 2027

-
Exclusion: Cl. 19.11.4.1 (Electrostatic discharges), Cl. 19.11.4.2 (Radiated fields), Cl. 19.11.4.3 (Fast transient bursts), Cl. 19.11.4.4 (Surge immunity test), Cl. 19.11.4.5 (Immunity to conducted discharges), Cl. 19.11.4.6 (Class 3 Voltage dips and interruptions), Cl. 19.11.4.7 (Harmonics), Cl. 24 (Components) "(1)Cooking ranges, hobs, ovens and similar appliances, (2)Commercial Dispensing Appliances and Vending Machines, (3) spin extractors (For testing charges please refer relevant Part 2 standard in LIMS)"

Bureau of Indian Standards

The National Standards Body of India

ABSOLUTE EXPERTISE TESTING LABORATORY LLP

PLOT NO.1, KH NO. 23/1, 1ST FLOOR, AMBEY GARDEN, VILLAGE LIBASPUR, NORTH WEST, DELHI-110042, NEW DELHI, North West, Delhi, 110042

7065432161 info.aetllab@gmail.com

Scope List