BIS - LIMS (Laboratory Information Management System)

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

PLOT NO. 27, STREET NO. 2, ADJOINING FOCAL POINT ROAD, TRANSPORT NAGAR, JALANDHAR, PUNJAB, JALANDHAR, Jalandhar, Punjab, 144004

9988862929 jbstestingsolutions@gmail.com

Scope List

Reset

282 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 17636 (2021)

Bunk Beds - Specification

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CLAUSE 4(DESIGN AND WORKMANSHIP)	-	2000	-
CLAUSE 5(DIMENSIONS)	-	2000	-
CLAUSE 6(SURFACE PERFORMANCE)	-	2000	-
CLAUSE 6.2(Fabric and Leather (Synthetic and Natural) Performance)	-	2000	-
CLAUSE 7.5.1(Attachment, Deflection and Strength of Ladder and Treads)	-	2000	-
CLAUSE 7.6(Strength of Frame and Fastenings)	-	2000	-
CLAUSE 7.7(Stability Test)	-	2000	-
CLAUSE 7.8(Fastening of Upper Bed to Lower Bed)	-	2000	-
Cl-5(Dimensions)	-	2000	-
Cl-6.1 (a)(Resistance to mechanical damage)	-	2000	-
Cl-6.1 (b)(Pencil hardness)	-	2000	-
Cl-6.1 (c)(Resistance to wet heat)	-	2000	-
Cl-6.1 (d)(Resistance to dry heat)	-	2000	-
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	2000	-
Cl-6.1 (f)(Resistance to marking by cold oils and fats)	-	2000	-
Cl-6.1 (g)(Adhesive performance)	-	2000	-
Cl-6.2 (a) 1(Breaking load)	-	2000	-
Cl-6.2 (a) 2(Elongation at break)	-	2000	-
Cl-6.2 (a) 3(Tear strength)	-	2000	-
Cl-6.2 (a) 4(Colour fastness to light)	-	2000	-
Cl-6.2 (a) 5(Colour fastness to rubbing)	-	2000	-
Cl-6.2 (a) 6(Colour fastness to perspiration)	-	2000	-
Cl-6.2 (a) 7(Colour fastness to water)	-	2000	-
Cl-6.2 (a) 8(Pilling resistance)	-	2000	-
Cl-6.2 (a) 9(Coating adhesion strength)	-	2000	-
Cl-6.2 (a) 10(Seam slippage)	-	2000	-
Cl-6.2 (a) 11(Resistance to damage by flexing)	-	2000	-
Cl-6.2 (a) 12(Abrasion resistance)	-	2000	-
Cl-6.2 (a) 13(Bursting strength)	-	2000	-
Cl-6.2 (a) 14(Resistance to cold)	-	2000	-
Cl-6.2 (b) 1(Tear strength)	-	2000	-
Cl-6.2 (b) 2(Flexing endurance)	-	2000	-
Cl-6.2 (b) 3(Finish adhesion)	-	2000	-
Cl-6.2 (b) 4(Colour fastness to artificial light)	-	2000	-
Cl-6.2 (b) 5(Colour fastness to rubbing)	-	2000	-
Cl-6.2 (b) 6(Colour fastness to water spotting)	-	2000	-
Cl-6.2 (b) 7(Water vapour permeability)	-	2000	-
Cl-6.2 (b) 8(Colour fastness to water)	-	2000	-
Cl-7.1(general test conditions)	-	2000	-
Cl-7.2.1(Top Bed Safety Barriers)	-	2000	-
Cl-7.2.2(Top Bed Safety Barriers)	-	2000	-
Cl-7.2.3(Top Bed Safety Barriers)	-	2000	-
Cl-7.2.4(Top Bed Safety Barriers)	-	2000	-
Cl-7.3.1(Gaps)	-	2000	-
Cl-7.3.2(Gaps)	-	2000	-
Cl-7.4.1(Bed Base)	-	2000	-
Cl-7.4.2(Bed Base)	-	2000	-
Cl-7.5.1(Attachment, Deflection and Strength of Ladder and Treads)	-	2000	-
Cl-7.5.2(Dimensions of Treads)	-	2000	-
Cl-7.6(Strength of Frame and Fastenings)	-	2000	-
Cl-7.7(Stability)	-	2000	-
Cl-7.8(Fastening of Upper Bed to Lower Bed)	-	2000	-
Cl-10(Marking)	-	1000	-

-
-

IS 13801 (2013)

Chequered Cement Concrete Tiles -

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
(Cl 7, 8 &9)(Length, Breadth, Thickness, Difference in length of side between the longest side and shorterst side in the sample shall not exceed 1 mm, Half tiles, Difference in Thickness between the thickest and thinnest tile in the sample shall not exceed 10 percent of minimum thickness, Depth of chequred groove, Thickness of wearing layer.)	-	1000	-
Cl 12.1(Concavity & Convexity )	-	500	-
Cl 12.2(Longest gap between the arms of the square and the edge of the title shall not exceed 2 percent of the length.)	-	1000	-
Cl 12.3(Shall not exceed 1 percent of the length of the edge.)	-	1000	-
Cl 12.4(Water absorption)	-	1000	-
Cl 12.5(Wet transverse strength)	-	5000	-
Cl 12.6(Resistance to wear)	-	5000	-
Cl 11(Finish)	-	500	-
Annex G3.1(Aluminium oxide content)	-	0	-
(Cl 7, 8 &9)(Length, Breadth, Thickness, Difference in length of side between the longest side and shorterst side in the sample shall not exceed 1 mm, Half tiles, Difference in Thickness between the thickest and thinnest tile in the sample shall not exceed 10 percent of minimum thickness, Depth of chequred groove, Thickness of wearing layer.)	-	1000	-
Cl 12.1(Concavity & Convexity )	-	500	-
Cl 12.2(Longest gap between the arms of the square and the edge of the title shall not exceed 2 percent of the length.)	-	1000	-
Cl 12.3(Shall not exceed 1 percent of the length of the edge.)	-	1000	-
Cl 12.4(Water absorption)	-	1000	-
Cl 12.5(Wet transverse strength)	-	5000	-
Cl 12.6(Resistance to wear)	-	5000	-
Cl 11(Finish)	-	500	-
(Cl 7, 8 &9)(Length, Breadth, Thickness, Difference in length of side between the longest side and shorterst side in the sample shall not exceed 1 mm, Half tiles, Difference in Thickness between the thickest and thinnest tile in the sample shall not exceed 10 percent of minimum thickness, Depth of chequred groove, Thickness of wearing layer.)	-	1000	-
Cl 12.1(Concavity & Convexity )	-	500	-
Cl 12.2(Longest gap between the arms of the square and the edge of the title shall not exceed 2 percent of the length.)	-	1000	-
Cl 12.3(Shall not exceed 1 percent of the length of the edge.)	-	1000	-
Cl 12.4(Water absorption)	-	1000	-
Cl 12.5(Wet transverse strength)	-	5000	-
Cl 12.6(Resistance to wear)	-	5000	-
Cl 11(Finish)	-	500	-
Cl 11(Finish)	-	500	-
Cl 12.6(Resistance to wear)	-	5000	-
Cl 12.5(Wet transverse strength)	-	5000	-
Cl 12.4(Water absorption)	-	1000	-
Cl 12.3(Shall not exceed 1 percent of the length of the edge.)	-	1000	-
Cl 12.2(Longest gap between the arms of the square and the edge of the title shall not exceed 2 percent of the length.)	-	1000	-
Cl 12.1(Concavity & Convexity )	-	500	-
(Cl 7, 8 &9)(Length, Breadth, Thickness, Difference in length of side between the longest side and shorterst side in the sample shall not exceed 1 mm, Half tiles, Difference in Thickness between the thickest and thinnest tile in the sample shall not exceed 10 percent of minimum thickness, Depth of chequred groove, Thickness of wearing layer.)	-	1000	-
8.3(Thickness of wearing layer)	-	1000	-

-
included w.e.f 09.03.2026

IS 733 (2025)

Wrought Aluminium and Aluminium Alloy Bars, Rods, Sections, Extruded Tube, Hollow Sections and Profiles for General Engineering Purposes ? Specification (Fourth Revision)

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6 Table 1 - Table 8(Sodium)	-	500	-
Cl. 6 Table 1 - Table 8(Strontium)	-	500	-
Cl. 6 Table 1 - Table 8(Antimony)	-	500	-
Cl. 6 Table 1 - Table 8(Phosphorus)	-	500	-
Cl. 6 Table 1 - Table 8(Zirconium +Titanium)	-	500	-
Cl-4(General requirements)	-	0	-
Cl-6.1, Table-1 to 8(Fe)	-	500	-
Cl-6.1, Table-1 to 8(Cu)	-	500	-
Cl-6.1, Table-1 to 8(Mn)	-	500	-
Cl-6.1, Table-1 to 8(Mg)	-	500	-
Cl-6.1, Table-1 to 8(Cr)	-	500	-
Cl-6.1, Table-1 to 8(Zn)	-	500	-
Cl-6.1, Table-1 to 8(Ti)	-	500	-
Cl-6.1, Table-1 to 8(V)	-	500	-
Cl-6.1, Table-1 to 8(Aluminium)	-	500	-
Cl-6.2(chemical analysis)	-	500	-
Cl-7.1, 7.2 & 7.3, Table-9(Dimensions)	-	1000	-
Cl-7.1, 7.2 & 7.3, Table-9(Rm MPa)	-	1000	-
Cl-7.1, 7.2 & 7.3, Table-9(Rp0.2 MPa)	-	1000	-
Cl-7.1, 7.2 & 7.3, Table-9(Elongation , Percent)	-	2000	-
Cl-9(Dimensions and Tolerances)	-	1000	-
Cl-12(Packaging and Marking)	-	0	-
Cl-7.1(Tensile test)	-	2000	-
Cl-5(Freedom from Defects)	-	0	-
Cl-6.1, Table-1 to 8(Si)	-	500	-
Cl. 6 Table 1 - Table 8(Sodium)	-	-	-
Cl. 6 Table 1 - Table 8(Strontium)	-	-	-
Cl. 6 Table 1 - Table 8(Antimony)	-	-	-
Cl. 6 Table 1 - Table 8(Phosphorus)	-	-	-
Cl. 6 Table 1 - Table 8(Zirconium +Titanium)	-	-	-
Cl-4(General requirements)	-	-	-
Cl-6.1, Table-1 to 8(Fe)	-	-	-
Cl-6.1, Table-1 to 8(Cu)	-	-	-
Cl-6.1, Table-1 to 8(Mn)	-	-	-
Cl-6.1, Table-1 to 8(Mg)	-	-	-
Cl-6.1, Table-1 to 8(Cr)	-	-	-
Cl-6.1, Table-1 to 8(Zn)	-	-	-
Cl-6.1, Table-1 to 8(Ti)	-	-	-
Cl-6.1, Table-1 to 8(V)	-	-	-
Cl-6.1, Table-1 to 8(Aluminium)	-	-	-
Cl-6.2(chemical analysis)	-	-	-
Cl-7.1, 7.2 & 7.3, Table-9(Dimensions)	-	-	-
Cl-7.1, 7.2 & 7.3, Table-9(Rm MPa)	-	-	-
Cl-7.1, 7.2 & 7.3, Table-9(Rp0.2 MPa)	-	-	-
Cl-7.1, 7.2 & 7.3, Table-9(Elongation , Percent)	-	-	-
Cl-9(Dimensions and Tolerances)	-	-	-
Cl-12(Packaging and Marking)	-	-	-
Cl-7.1(Tensile test)	-	-	-
Cl-5(Freedom from Defects)	-	-	-
Cl-6.1, Table-1 to 8(Si)	-	-	-

-
included w.e.f 09.03.2026

IS 5382 (2025)

RUBBER SEALS JOINT RINGS FOR WATER SUPPLY DRAINAGE AND SEWERAGE PIPELINES SPECIFICATION FOR MATERIALS ( Third Revision )

81000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5.1(General requirement)	-	81000		Stress relaxation:1,80,000 (additional, if required), Option tests: 27750 each (additional, if required)

-
-

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

26500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.10(Slow Crack Growth Rate)	-	1000	-
8.9 table-6(Elongation at Break)	-	1500	-
8.8(Tensile Strength for Butt-fusion)	-	1500	-
8.7(Density)	-	1000	-
8.5 (Oxidation Induction Time)	-	2000	-
8.4( Melt Flow Rate)	-	1500	-
8.2(Longitudinal Reversion Test)	-	1000	-
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	2000	-
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	2000	-
7.4.1.2(Ovality)	-	200	-
Cl-7.4(Mean Outside Diameter (For upto 50 mm take 8 reading, above 50mm take 6 reading & average will be reported))	-	200	-
7.2(Length)	-	200	-
6.2.1(6.1.1 Identification Stripes)	-	200	-
6.2(Colour)	-	200	-
6.1.4(PIPE DESCRIPTION)	-	200	-
6.1.3 (PIPE DESCRIPTION)	-	200	-
6, 6.1.2(PIPE DESCRIPTION)	-	200	-
6, 6.1.1(PIPE DESCRIPTION)	-	200	-
6, 6.1(PIPE DESCRIPTION)	-	200	-
8.6(Overall migration)	-	2000	-
8.3(Carbon black)	-	1000	-
5.4(Anti oxydent)	-	0	EXCLUSION REQUESTED
5.3(e)(Carbon Black Master Batch)	-	0	EXCLUSION REQUESTED
5.3(d)(Carbon Black Master Batch)	-	2500	-
5.3(c)(Carbon Black Master Batch)	-	2000	-
5.3(b)(Carbon Black Master Batch)	-	0	EXCLUSION REQUESTED
5.3 (a)(Carbon Black Master Batch)	-	2000	-
5.2(Polyethylene Resin)	-	2000	-
5, 5.1 table-1(MATERIALS)	-	200	-
7()	-	500	-
5.2(Density)	-	1000	-
5.2(MFI @ 1900C/5.0 Kg)	-	1000	-
5.2(Volatile matter Content)	-	1000	-
5.3(Toluene Extract)	-	1000	-
Clause 7.1(Visual Apperance)	-	200	-
Clause 7.3(Coiling)	-	200	-
Clause 8.3(Carbon Black content)	-	1500	-
Clause 8.3(Carbon Black Dispersion)	-	1000	-
Clause 8.6(Overall migration (stimulate))	-	2000	-
Clause 8.6(Overall migration (surface of material))	-	2000	-
7.1(Visual Appearance)	-	200	-
7.3(Coiling)	-	200	-
Table-2 (iii, iv)(Thermal Stability (Oxidation Induction Time), Volatile Matter)	-	2500	-
Cl. 8.3(Carbon Black Content)	-	1500	-
Cl. 8.3(Carbon Black Dispersion)	-	1000	-
5.2,T2(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963)	-	1500	-
8.7(Density-IS 7328:2020)	-	1000	-
8.7(Corrected Density- IS 7328:2020)	-	500	-
8.9,T6("Tensile - IS 4984-2016 (Annexure-H)")	-	2500	-
8.9,T6("Elongation -IS 4984-2016 (Annexure-H)")	-	2500	-
Cl 8.3(Carbon Black Content)	-	1000	-
Cl 8.3(Carbon Black Dispersion)	-	1000	-
CL 7.4(Wall Thickness (Take 8 reading & Minimum and Maximum reported))	-	1000	-
8.10(Slow Crack Growth Rate)	-	0	-
Cl-7.4(Mean Outside Diameter (For upto 50 mm take 8 reading, above 50mm take 6 reading & average will be reported))	-	0	-
7()	-	0.03	-
5.2(Density)	-	0	-
5.2(MFI @ 1900C/5.0 Kg)	-	0.03	-
5.2(Volatile matter Content)	-	0	-
5.3(Toluene Extract)	-	0.03	-
Clause 7.1(Visual Apperance)	-	0	-
Clause 7.3(Coiling)	-	0	-
Clause 8.3(Carbon Black content)	-	0	-
Clause 8.3(Carbon Black Dispersion)	-	0	-
Clause 8.6(Overall migration (stimulate))	-	0	-
Clause 8.6(Overall migration (surface of material))	-	0	-
7.1(Visual Appearance)	-	0	-
7.3(Coiling)	-	0.02	-
Table-2 (iii, iv)(Thermal Stability (Oxidation Induction Time), Volatile Matter)	-	0	-
Cl. 8.3(Carbon Black Content)	-	0	-
Cl. 8.3(Carbon Black Dispersion)	-	0	-
5.2,T2(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963)	-	0	-
8.7(Density-IS 7328:2020)	-	0.03	-
8.7(Corrected Density- IS 7328:2020)	-	0.03	-
8.9,T6("Tensile - IS 4984-2016 (Annexure-H)")	-	0.02	-
8.9,T6("Elongation -IS 4984-2016 (Annexure-H)")	-	0.02	-
Cl 8.3(Carbon Black Content)	-	0	-
Cl 8.3(Carbon Black Dispersion)	-	0	-
CL 7.4(Wall Thickness (Take 8 reading & Minimum and Maximum reported))	-	0	-

-
1. 5.4 (Anti oxydent) anti-oxydent 5.4 (Anti oxydent), 5.3(b) (Carbon Black Master Batch), 5.3 (Toluene Extract), Cl 5.2 Table 2 Sl No V Water content, Cl 5.3(a) Higher Olefin constituent additional requirement. 2. 5.3(b) (Carbon Black Master Batch) Carbon black master batch 5.4 (Anti oxydent), 5.3(b) (Carbon Black Master Batch), 5.3 (Toluene Extract), Cl 5.2 Table 2 Sl No V Water content, Cl 5.3(a) Higher Olefin constituent additional requirement. 3. 5.3(e) (Carbon Black Master Batch) carbon black master batch 5.4 (Anti oxydent), 5.3(b) (Carbon Black Master Batch), 5.3 (Toluene Extract), Cl 5.2 Table 2 Sl No V Water content, Cl 5.3(a) Higher Olefin constituent additional requirement.

IS 10748 (2025)

Hot-Rolled Steel Strip for Welded Tubes and Pipes - Specification ( Third Revision)

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4(Supply of Materials)	-	14000		-

-
-

IS 12701 (1996)

Rotational moulded polyethylene water storage tanks - specification (First Revision)

21000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.3(Carbon Black Content )	-	2000	-
4.2.3(Carbon Dispersion Test)	-	2000	-
5(Types and Features )	-	1500	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	1500	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	1500	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	1500	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	1500	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	1500	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	1500	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	1500	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	1500	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	1500	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	1500	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	1500	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	1500	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	1500	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	1500	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	1500	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	1500	-
5.3(Types and Features )	-	1500	-
5.6(Types and Features )	-	1500	-
6.1(Finish)	-	500	-
7.1.1(Resistance to Deformation)	-	1000	-
7.1.2(Resistance to Deformation)	-	2000	-
7.2(Resistance to Impact)	-	3000	-
7.3(Test for Top Load Resistance)	-	3000	-
7.4(Tensile Strength)	-	5500	-
7.5(Flexural Modulus)	-	5500	-
7.6(overall Migration)	-	5500	-
9.2.1(Man-Hole and Hand-Hole Lids)	-	5500	-
9.2(Man-Hole and Hand-Hole Lids)	-	1000	-
9.1(Man-Hole and Hand-Hole Lids)	-	1000	-
9.1(Lid Thickness)	-	1000	-
7.3(Test for Top Load Resistance)	-	3000	-
6.1(Finish)	-	500	-
5.4(Wall Thickness above effective height)	-	1500	-
5.2 Table 2 (7)(Minimum Wall Thickness)	-	1500	-
5.1 Table 1 (7)(Minimum Weight of Tank (Without Lid))	-	1500	-
4.2.1(Density)	-	500	-
4.2.2(MFI)	-	500	-
7.6(overall Migration)	-	500	-
4.1(MATERIALS)	-	500	-
4.2.2(MFR)	-	500	-
4.2.1(Density)	-	500	-
5.4(Wall Thickness)	-	500	-
10(MARKING)	-	500	-
Cl-7.6(Overall Migration)	-	500	-

-
Included w.e.f. 02.03.2026

IS 1875 (2025)

Steel Ingots, Billets, Blooms, Slabs and Bars For Forging - Specification (Sixth Revision)

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 6(Freedom From Defects)	-	16000		-

-
-

IS 209 (2024)

Refined Zinc - Specification (Fifth Revision)

9900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7.1, Cl 7.2 & Table 1(Chemical Composition (Zinc))	-	1000	-
Cl 7.1, Cl 7.2 & Table 1(Chemical Composition (Lead))	-	1000	-
Cl 7.1, Cl 7.2 & Table 1(Chemical Composition (Iron))	-	1000	-
Cl 7.1, Cl 7.2 & Table 1(Chemical Composition (Cadmium))	-	1000	-
Cl 7.1, Cl 7.2 & Table 1(Chemical Composition (Aluminium))	-	1000	-
Cl 7.1, Cl 7.2 & Table 1(Chemical Composition (Copper))	-	1000	-
Cl 7.1, Cl 7.2 & Table 1(Chemical Composition (Tin))	-	1000	-
Cl 7.1, Cl 7.2 & Table 1(Chemical Composition (Total of All Impurities))	-	1500	-
Cl 9.1(Freedom from Defect)	-	1500	-

-
Included w.e.f. 26.02.2026

IS 1341 (2018)

Steel Butt Hinges - Specification (Sixth Revision)

1750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1 Tables 2 to 9 (2)(Size of Hinge)	-	1750	For Complete dimensional and qualitative tests
5.1 Tables 2 to 9 (3)(Length A)	-	1750	For Complete dimensional and qualitative tests
5.1 Tables 2 to 9 (4)(Breadth B)	-	1750	For Complete dimensional and qualitative tests
5.1 Tables 2 to 9 (4)(Breadth B1)	-	1750	For Complete dimensional and qualitative tests
5.1 Tables 2 to 9 (4)(Breadth B2)	-	1750	For Complete dimensional and qualitative tests
5.1 Tables 2 to 9 (5)(Thickness of Flap C)	-	1750	For Complete dimensional and qualitative tests
5.1 Tables 2 to 9 (6)(Diameter of Hinge Pin D)	-	1750	For Complete dimensional and qualitative tests
5.1 Tables 2 to 9 (7)(Number of Knuckles)	-	1750	For Complete dimensional and qualitative tests
5.1 Tables 2 to 9 (9)(Holes for Screw No.)	-	1750	For Complete dimensional and qualitative tests
6.1(General)	-	1750	For Complete dimensional and qualitative tests
7(Finish)	-	1750	For Complete dimensional and qualitative tests
5.1 Tables 2 to 9 (8)(Number of Screw Holes)	-	1750	For Complete dimensional and qualitative tests
TABLE-1 (Clause-4)( CARBON)	-	500	Additional testing charges, if required (per element)
TABLE-1 (Clause-4)(MANGANESE)	-	500	Additional testing charges, if required (per element)
TABLE-1 (Clause-4)(SULPHUR)	-	500	Additional testing charges, if required (per element)
TABLE-1 (Clause-4)(PHOSPHURS)	-	500	Additional testing charges, if required (per element)
TABLE-1 (Clause-4)(NITROGEN)	-	500	Additional testing charges, if required (per element)

-
-

IS 8329 (2000)

Centrifugally cast (Spun) ductile iron pressure pipes for water, gas and sewage - Specification (Third Revision)

Socket & spigot pipes, flanged pipes

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 10(Hardness & Tensile Test)	-	5000	For complete mech. test. * 7500 for 80 mm * 13000 from 100 to 250 mm 21000 from 300 to 600 mm 30000 from 700 to 1000 mm *40000 from 1100 to 1400 mm additional testing charges for amend. no. 6 as per applicability and coating, if required.
Cl 10(Hardness & Tensile Test)	-	5000	For complete mech. test. * 7500 for 80 mm * 13000 from 100 to 250 mm 21000 from 300 to 600 mm 30000 from 700 to 1000 mm *40000 from 1100 to 1400 mm additional testing charges for amend. no. 6 as per applicability and coating, if required.
Cl 11(Hydrostatic Test)	-	2500	For complete HST and dimension. * 7500 for 80 mm * 13000 from 100 to 250 mm 21000 from 300 to 600 mm 30000 from 700 to 1000 mm *40000 from 1100 to 1400 mm additional testing charges for amend. no. 6 as per applicability and coating, if required
Cl 13(Length, Diameter, Wall Thickness & Ovality)	-	2500	For complete HST and dimension. * 7500 for 80 mm * 13000 from 100 to 250 mm 21000 from 300 to 600 mm 30000 from 700 to 1000 mm *40000 from 1100 to 1400 mm additional testing charges for amend. no. 6 as per applicability and coating, if required

-
-

IS 5504 (1997)

Specification for spiral welded pipes (First Revision)

10800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4/4.1(MANUFACTURE)	-	1000	For complete qualitative tests
4/4.2(MANUFACTURE)	-	1000	For complete qualitative tests
4/4.3(MANUFACTURE)	-	1000	For complete qualitative tests
Cl. 5.1(Carbon)	-	1300	For complete chemical testing
Cl. 5.1(Sulphur)	-	1300	For complete chemical testing
Cl. 5.1(Phosphorus)	-	1300	For complete chemical testing
5.2(Product Analysis)	-	1300	For complete chemical testing
6.1(Tensile Test)	-	5000	For complete Mechanical testing
6.2(Flattening Test)	-	500	-
6.3/6.3.1.1(Submerged Arc Weld Test- Guided bend test)	-	500	-
7(Hydrostatic Test- Pressure)	-	500	-
8.1(Length)	-	1000	For complete dimensional testing
8.2(Dimensions)	-	1000	For complete dimensional testing
9/9.1(Finish)	-	1000	For complete qualititave testing
10(Repair by Welding)	-	500	-
11(Protective coating)	-	500	-
6.1(IS 1608 Part 1)	-	5000	For complete mechanical testing
6.1(IS 1608 Part 1)	-	5000	For complete mechanical testing
8.2(IS 5504)	-	0	-
8.2(IS 5504)	-	0	-
8.2.3(IS 5504)	-	0	-
Clause 4.2 & Annexure A, A2.2(IS 5504)	-	0	-
Clause 4.2 & Annexure A, A2.3(IS 5504)	-	0	-
Clause 4.2 & Annexure A, A2.4(IS 5504)	-	0	-
Clause 4.2 & Annexure A, A2.5(IS 5504)	-	0	-
6.1(IS 1608 Part 1)	-	0	-
6.1(IS 1608 Part 1)	-	0	-
8.2(IS 5504)	-	0	-
8.2(IS 5504)	-	0	-
8.2.3(IS 5504)	-	0	-
Clause 4.2 & Annexure A, A2.2(IS 5504)	-	0	-
Clause 4.2 & Annexure A, A2.3(IS 5504)	-	0	-
Clause 4.2 & Annexure A, A2.4(IS 5504)	-	0	-
Clause 4.2 & Annexure A, A2.5(IS 5504)	-	0	-
6.1(Yield Stress)	-	0	-
6.1(Elongation)	-	0	-
8.2(Thickness)	-	0	-
8.2(Diameter)	-	0	-
8.2.3(Ovality)	-	0	-
Clause 4.2 & Annexure A, A2.2(Transverse Tensile Strength)	-	0	-
Clause 4.2 & Annexure A, A2.3(Logitudinal Tensile-Elongation Test)	-	0	-
Clause 4.2 & Annexure A, A2.4(Transverse Guided Bend Test)	-	0	-
Clause 4.2 & Annexure A, A2.5(Nick Break Test)	-	0	-
6.1(Yield Stress)	-	0	-
6.1(Elongation)	-	0	-
8.2(Thickness)	-	0	-
8.2.3(Ovality)	-	0	-
Clause 4.2 & Annexure A, A2.2(Transverse Tensile Strength)	-	0	-
Clause 4.2 & Annexure A, A2.3(Logitudinal Tensile-Elongation Test)	-	0	-
Clause 4.2 & Annexure A, A2.4(Transverse Guided Bend Test)	-	0	-
Clause 4.2 & Annexure A, A2.5(Nick Break Test)	-	0	-
8.2.3(Diameter)	-	0	-

-
-

IS 17631 (2022)

Work Chairs - Specification

68000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
clause 4(DESIGN AND WORKMANSHIP)	-	1000	-
clause 5(DIMENSIONS)	-	1000	-
Cl-6.1 (a)(Resistance to mechanical damage)	-	4000	-
Cl-6.2 (a) (1)(For Fabric and Synthetic Leather:- Breaking load)	-	4000	-
Cl-7.3.1(Front Edge Overturning)	-	1500	-
Cl-7.3.2(Forwards Overturning)	-	1500	-
Cl-7.3.3(Forwards Overturning for Chairs with Foot Rest)	-	1500	-
Cl-7.3.4(Sideways Overturning for Chairs Without Arm Rests)	-	1500	-
Cl-6.1 (b)(Pencil hardness)	-	1000	-
Cl-6.1 (c)(Resistance to wet heat;)	-	1500	-
Cl-6.1 (d)(Resistance to dry heat;)	-	1500	-
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	1500	-
Cl-6.1 (f)(Resistance to marking by cold oils and fats;)	-	1500	-
Cl-6.1 (g)(Adhesive performance)	-	1000	-
Cl-6.2 (a) (2)(For Fabric and Synthetic Leather:- Elongation at break)	-	1000	-
Cl-6.2 (a) (3)(For Fabric and Synthetic Leather:- Tear strength)	-	1000	-
Cl-6.2 (a) (4)(For Fabric and Synthetic Leather:- Colour fastness to light)	-	1000	-
Cl-6.2 (a) (5)(For Fabric and Synthetic Leather:- Colour fastness to rubbing)	-	1000	-
Cl-6.2 (a) (6)(For Fabric and Synthetic Leather:- Colour fastness to perspiration)	-	1000	-
Cl-6.2 (a) (7)(For Fabric and Synthetic Leather:- Colour fastness to water)	-	1000	-
Cl-6.2 (a) (8)(For Fabric and Synthetic Leather:- Pilling resistance)	-	1000	-
Cl-6.2 (a) (9)(For Fabric and Synthetic Leather:- Coating adhesion strength)	-	1000	-
Cl-6.2 (a) (10)(For Fabric and Synthetic Leather:- Seam slippage)	-	1000	-
Cl-6.2 (a) (11)(For Fabric and Synthetic Leather:- Resistance to damage by flexing)	-	1000	-
Cl-6.2 (a) (12)(For Fabric and Synthetic Leather:- Abrasion resistance)	-	1000	-
Cl-6.2 (a) (13)(For Fabric and Synthetic Leather:- Bursting strength)	-	1000	-
Cl-6.2 (a) (14)(For Fabric and Synthetic Leather:- Resistance to cold)	-	1000	-
Cl-6.2 (b) (2)(For Natural Leather:- Flexing endurance)	-	1500	-
Cl-6.2 (b) (1)(For Natural Leather:- Tear strength)	-	1500	-
Cl-6.2 (b) (3)(For Natural Leather: Finish adhesion)	-	1000	-
Cl-6.2 (b) (4)(For Natural Leather: Colour fastness to artificial light)	-	1250	-
Cl-6.2 (b) (5)(For Natural Leather: Colour fastness to rubbing)	-	1250	-
Cl-6.2 (b) (6)(For Natural Leather: Colour fastness to water spotting)	-	1250	-
Cl-6.2 (b) (7)(For Natural Leather: Water vapour permeability)	-	1250	-
Cl-6.2 (b) (8)(For Natural Leather: Colour fastness to water)	-	1250	-
Cl-7.3.5(Sideways Overturning for Chairs With Arm Rests)	-	1000	-
Cl-7.3.6(Rearwards Overturning for Chairs Without Back Rest Inclination)	-	1000	-
Cl-7.3.7(Rearwards Overturning for Chairs with Backrest Inclination)	-	1000	-
Cl-7.4.1(Seat Front Edge Static Load Test)	-	1250	-
Cl-7.4.2(Combined Seat and Back Static Load Test)	-	1250	-
Cl-7.4.3(Arm Rest Downward Static Load Test — Central)	-	1250	-
Cl-7.4.4(Arm Rest Downward Static Load Test — Front)	-	1500	-
Cl-7.4.5(Arm Rest Sideways Static Load Test)	-	1500	-
Cl-7.4.6(Foot Rest Static Load Test)	-	1500	-
Cl-7.5.1(Seat and Back Durability)	-	19000	-
Cl-7.5.2(Arm Rest Durability)	-	15000	-
Cl-7.5.3(Swivel Test)	-	15000	-
Cl-7.5.4(Foot-rest Durability)	-	15000	-
Cl-7.5.5(Castor and Chair-Base Durability)	-	15000	-

-
-

IS 17632 (2022)

General Purpose Chairs and Stools - Specification

57000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CLAUSE 5(DIMENSIONS)	-	1500	-
CLAUSE 6(SURFACE PERFORMANCE)	-	6500	-
CLAUSE 6.2(Fabric and Leather (Synthetic and Natural) Performance)	-	12500	-
CLAUSE 7.2.1(Forwards Overbalancing and Sideways Overbalancing for Chairs without Arms)	-	1000	-
CLAUSE 7.2.2(Rearwards Overbalancing)	-	1000	-
CLAUSE 7.2.3(Sideways Overbalancing for Chairs with Arms)	-	1000	-
CLAUSE 7.2.4(Sideways Overbalancing for Chairs with Arms)	-	1000	-
CLAUSE 7.3.1.1(Seat static load test)	-	1800	-
CLAUSE 7.3.1.2(Back static load test)	-	1800	-
CLAUSE 7.3.1.3(Armrests/Wings sideways static load test)	-	1800	-
CLAUSE 7.3.1.4(Arm downwards static load test)	-	1800	-
CLAUSE 7.3.1.5(Leg forward static load test)	-	1800	-
CLAUSE 7.3.1.6(Leg sideways static load test)	-	1800	-
CLAUSE 7.3.1.7(Diagonal base load test)	-	1800	-
CLAUSE 7.3.1.8(Foot rest static-load test)	-	1800	-
CLAUSE 7.3.2.1(Seat impact test)	-	1800	-
CLAUSE 7.3.2.2(Back impact test)	-	1800	-
CLAUSE 7.3.2.3(Arm impact test)	-	1800	-
CLAUSE 7.3.2.4(Drop test)	-	1800	-
CLAUSE 7.4.1(Seat Fatigue Test)	-	12500	-
CLAUSE 7.4.2(Back Fatigue Test)	-	13000	-
CLAUSE 7.4.3(Arm Rest Durability Test)	-	19000	-
Cl - 5(DIMENSIONS)	-	1500	-
Cl-6.1 (a)(Resistance to mechanical damage)	-	1000	-
Cl-6.1 (b)(Pencil hardness)	-	1000	-
Cl-6.1 (c)(Resistance to wet heat)	-	1500	-
Cl-6.1 (d)(Resistance to dry heat)	-	1500	-
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	1000	-
Cl-6.1 (f)(Resistance to marking by cold oils and fats)	-	1000	-
Cl-6.1 (g)(Adhesive performance)	-	1500	-
Cl-6.2 (a) 1(Breaking load)	-	1000	-
Cl-6.2 (a) 2(Elongation at break)	-	1000	-
Cl-6.2 (a) 3(Tear strength)	-	1000	-
Cl-6.2 (a) 4(Colour fastness to light)	-	1500	-
Cl-6.2 (a) 5(Colour fastness to rubbing)	-	1000	-
Cl-6.2 (a) 6(Colour fastness to perspiration)	-	1000	-
Cl-6.2 (a) 7(Colour fastness to water)	-	1000	-
Cl-6.2 (a) 8(Pilling resistance)	-	1000	-
Cl-6.2 (a) 9(Coating adhesion strength)	-	1000	-
Cl-6.2 (a) 10(Seam slippage)	-	1000	-
Cl-6.2 (a) 11(Resistance to damage by flexing)	-	1000	-
Cl-6.2 (a) 12(Abrasion resistance)	-	1000	-
Cl-6.2 (a) 13(Bursting strength)	-	1000	-
Cl-6.2 (a) 14(Resistance to cold)	-	1000	-
Cl-6.2 (b) 1(Tear strength)	-	1000	-
Cl-6.2 (b) 2(Flexing endurance)	-	1000	-
Cl-6.2 (b) 3(Finish adhesion)	-	1000	-
Cl-6.2 (b) 4(Colour fastness to artificial light)	-	1000	-
Cl-6.2 (b) 5(Colour fastness to rubbing)	-	1000	-
Cl-6.2 (b) 6(Colour fastness to water spotting)	-	1000	-
Cl-6.2 (b) 7(Water vapour permeability)	-	1000	-
Cl-6.2 (b) 8(Colour fastness to water)	-	1000	-
Cl-7.2.1(Forwards Overbalancing and Sideways Overbalancing for Chairs without Arms)	-	0	-
Cl-7.2.2(Rearwards Overbalancing)	-	0	-
Cl-7.2.3(Sideways Overbalancing for Chairs with Arms)	-	0	-
Cl-7.2.4(Stools/ Poufs (All Directions))	-	0	-
Cl-7.3.1(Static Load Test)	-	0	-
Cl-7.3.2(Impact Test)	-	0	-
Cl-7.4.1(Seat Fatigue Test)	-	0	-
Cl-7.4.2(Back Fatigue Test)	-	0	-
Cl-7.4.3(Arm Rest Durability)	-	0	-
Cl-9(Marking)	-	0	-
7.1(General test conditions)	-	0	-

-
-

IS 17633 (2022)

Tables and Desks - Specification

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CLAUSE 4(Design and workmanship)	-	1000	-
ClAUSE 5(Dimensions)	-	1000	-
CLAUSE 6(SURFACE PERFORMANCE REQUIRMENTS)	-	9000	-
CLAUSE 7.2.1(Stability Under Vertical Load)	-	1000	-
CLAUSE 7.2.1.1(Test for tables that can be set to a height of 950 mm or less)	-	1000	-
CLAUSE 7.2.1.2(" Test for Tables that can be set to a height greater than 950 mm")	-	1000	-
CLAUSE 7.2.2(Stability with Extension Elements Open Place the table on the floor surface)	-	1000	-
CLAUSE 7.2.3(Stability Under Horizontal Load)	-	1000	-
CLAUSE 7.2.3.1(Test for tables that can be set to a height of 950 mm or less)	-	1000	-
CLAUSE 7.2.3.2(" Test for Tables that can be set to a height greater than 950 mm")	-	1000	-
CLAUSE 7.3.1(Strength under Vertical Static Force)	-	2000	-
CLAUSE 7.3.1.1(Stated load)	-	2000	-
CLAUSE 7.3.1.2(For occasional heavy loads)	-	1000	-
CLAUSE 7.3.2(Strength under horizontal static force)	-	2000	-
CLAUSE 7.4.1(Durability under Vertical Force)	-	3500	-
CLAUSE 7.4.2(Durability of the Height Adjustment Mechanism)	-	3500	-
CLAUSE 7.5.1(Durability and Stiffness Under Horizontal Force)	-	6000	-
CLAUSE 7.5.2(Durability under Horizontal Force)	-	4000	-
CLAUSE 7.5.3(Stiffness of the Structure Under Horizontal Force)	-	2000	-
CLAUSE 7.6.1(Vertical Impact Test)	-	1000	-
CLAUSE 7.6.2(Vertical Impact Test for Glass Table Tops)	-	1500	-
CLAUSE 7.6.3(Vertical Impact Test for All Other Table Tops)	-	1500	-
CLAUSE 7.7(Deflection of Table Tops)	-	2000	-
CLAUSE 7.8(Durability of Tables with Castors)	-	8000	-
CLAUSE 7.9(Drop Test)	-	2000	-
Cl - 5(Dimensions)	-	1000	-
Cl-6 (a)(Resistance to mechanical damage)	-	3000	-
Cl-6 (b)(Pencil hardness)	-	1000	-
Cl-6 (c)(Resistance to wet heat)	-	2000	-
Cl-6 (d)(Resistance to dry heat)	-	2000	-
Cl-6 (e)(Resistance to marking by cold liquids)	-	3000	-
Cl-6 (f)(Resistance to marking by cold oils and fats)	-	2000	-
Cl-6 (g)(Adhesive performance)	-	2000	-
Cl-7.2.1(Stability Under Vertical Load)	-	0	-
Cl-7.2.2(Stability with Extension Elements Open)	-	0	-
Cl-7.2.3(Stability Under Horizontal Load)	-	0	-
Cl-7.3.1(Strength under Vertical Static Force)	-	0	-
Cl-7.3.2(Strength under horizontal static force)	-	0	-
Cl-7.4.1(Durability under Vertical Force)	-	0	-
Cl-7.4.2(Durability of the Height Adjustment Mechanism)	-	0	-
Cl-7.5.1(General)	-	0	-
Cl-7.5.2(Durability under Horizontal Force)	-	0	-
Cl-7.5.3(Stiffness of the Structure Under Horizontal Force)	-	0	-
Cl-7.6.1(General)	-	0	-
Cl-7.6.2(Vertical Impact Test for Glass Table Tops)	-	0	-
Cl-7.6.3(Vertical Impact Test for All Other Table Tops)	-	0	-
Cl-7.7(Deflection of Table Tops)	-	0	-
Cl-7.8(Durability of Tables with Castors)	-	0	-
Cl-7.9(Drop Test)	-	0	-
Cl-9(Marking)	-	0	-
7.1(General test conditions)	-	0	-

-
-

IS 17634 (2022)

Storage Units - Specification

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CLAUSE 5(DIMENSIONS)	-	5000	For cl 5 & 9
CLAUSE 6(SURFACE PERFORMANCE)	-	2500	For cl 6.1
CLAUSE 6.2(Fabric and Leather (Synthetic and Natural) Performance)	-	12500	For cl 6.2 and 7.5, additional if required
CLAUSE 7.1(SAFETY TESTS (General))	-	12500	For cl 7.1
CLAUSE 7.2(Test for Non-Movable Parts)	-	13000	For cl 7.2
CLAUSE 7.2.1(Shelves)	-	13000	For cl 7.2
CLAUSE 7.2.1.2(Deflection of shelves)	-	13000	For cl 7.2
CLAUSE 7.2.2.1(Sustained load test for tops and bottoms)	-	13000	For cl 7.2
CLAUSE 7.2.2.2(Static load test for tops and bottoms)	-	13000	For cl 7.2
CLAUSE 7.2.3.1(Strength of clothes-rail supports)	-	13000	For cl 7.2
CLAUSE 7.2.3.2(Dislodgement of clothes rail)	-	13000	For cl 7.2
CLAUSE 7.2.4.2(Drop test)	-	13000	For cl 7.2
CLAUSE 7.2.4.3(Tests for units with castors or wheels)	-	13000	For cl 7.2
CLAUSE 7.3.1(Pivoted Doors)	-	10000	For cl 7.3 and 7.4
CLAUSE 7.3.1.2.1(Vertical load on pivoted door)	-	10000	For cl 7.3 and 7.4
CLAUSE 7.3.1.2.2(Horizontal load on pivoted door)	-	10000	For cl 7.3 and 7.4
CLAUSE 7.3.1.3(Slam-shut test of pivoted doors)	-	10000	For cl 7.3 and 7.4
CLAUSE 7.3.1.4(Durability of pivoted doors)	-	10000	For cl 7.3 and 7.4
CLAUSE 7.3.2(Sliding Doors and Horizontal Roll-fronts)	-	10000	For cl 7.3 and 7.4
CLAUSE 7.3.2.2(Slam shut/open test of sliding doors and horizontal roll-fronts)	-	10000	For cl 7.3 and 7.4
CLAUSE 7.3.2.3(Durability of sliding doors and horizontal roll-fronts)	-	10000	For cl 7.3 and 7.4
CLAUSE 7.3.3(Flaps)	-	10000	For cl 7.3 and 7.4
CLAUSE 7.3.3.1(Strength of bottom-hinged flaps)	-	10000	For cl 7.3 and 7.4
CLAUSE 7.3.3.2(Durability of flaps)	-	10000	For cl 7.3 and 7.4
CLAUSE 7.3.3.3(Drop test for top-hinged flaps)	-	10000	For cl 7.3 and 7.4
CLAUSE 7.3.4(Vertical Roll-Fronts)	-	10000	For cl 7.3 and 7.4
CLAUSE 7.3.4.1(Slam shut/open test of vertical roll-fronts)	-	10000	For cl 7.3 and 7.4
CLAUSE 7.3.4.2(Durability of vertical roll-fronts)	-	10000	For cl 7.3 and 7.4
CLAUSE 7.3.5(Extension Element)	-	10000	For cl 7.3 and 7.4
CLAUSE 7.3.5.2(Strength of extension elements)	-	10000	For cl 7.3 and 7.4
CLAUSE 7.3.5.3(Durability of extension elements)	-	10000	For cl 7.3 and 7.4
CLAUSE 7.3.5.4(Slam shut/open test of extension element)	-	10000	For cl 7.3 and 7.4
CLAUSE 7.3.5.5(Displacement of extension element bottoms)	-	10000	For cl 7.3 and 7.4
CLAUSE 7.3.5.6(Interlock test)	-	10000	For cl 7.3 and 7.4
CLAUSE 7.3.6(Locking and Latching Mechanism Tests)	-	10000	For cl 7.3 and 7.4
CLAUSE 7.3.6.2(Strength test for locking and latching mechanisms for extension elements)	-	10000	For cl 7.3 and 7.4
CLAUSE 7.3.6.3(Locking and latching mechanisms for doors, flaps and roll-fronts)	-	10000	For cl 7.3 and 7.4
CLAUSE 7.3.6.4(Durability test of locking and latching mechanisms)	-	10000	For cl 7.3 and 7.4
CLAUSE 7.3.7(Pull Force Test)	-	10000	For cl 7.3 and 7.4
CLAUSE 7.3.7(Pull Force Test)	-	10000	For cl 7.3 and 7.4
CLAUSE 7.3.8(Top Load Ease Cycle Test)	-	10000	For cl 7.3 and 7.4
CLAUSE 7.3.9(Durability Test for Units with Seating Surfaces – Cyclic Impact)	-	10000	For cl 7.3 and 7.4
CLAUSE 7.3.10("Drop Test – Dynamic – for Units with Seat Surfaces")	-	10000	For cl 7.3 and 7.4
CLAUSE 7.4.1.3(Sustained load test (overload))	-	10000	For cl 7.3 and 7.4
CLAUSE 7.4.1.4(Dislodgement test)	-	10000	For cl 7.3 and 7.4
CLAUSE 7.5(Stability Tests)	-	12500	For cl 6.2 and 7.5
CLAUSE 7.5.2.1("Units that can be adjusted to a Height of 1 000 mm or less")	-	12500	For cl 6.2 and 7.5
CLAUSE 7.5.2.2("Units that can be adjusted to a height of more than 1 000 mm")	-	12500	For cl 6.2 and 7.5
CLAUSE 7.5.3(Opening Doors, Extension Elements and Flaps, All Storage Units Unloaded)	-	12500	For cl 6.2 and 7.5
CLAUSE 7.5.6(Vertical Force Stability Test for Storage Units)	-	12500	For cl 6.2 and 7.5
CLAUSE 7.5.7(Stability Test for Pedestals/Storage Units with Seat Surfaces)	-	12500	For cl 6.2 and 7.5
CLAUSE 7.5.8("Dynamic Stability Test for Units with Castors")	-	12500	For cl 6.2 and 7.5
CLAUSE 7.5.9(Strength Test for Wall Attachments)	-	12500	For cl 6.2 and 7.5
Cl-6.1 (a)(Resistance to mechanical damage)	-	5000	For cl 6.1
Cl-6.1 (b)(Pencil hardness)	-	5000	For cl 6.1
Cl-6.1 (c)(Resistance to wet heat)	-	5000	For cl 6.1
Cl-6.1 (d)Cl-6.1 (d)(Resistance to dry heat)	-	5000	For cl 6.1
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	5000	For cl 6.1
Cl-6.1 (f)(Resistance to marking by cold oils and fats Resistance to marking by cold oils and fats)	-	5000	For cl 6.1
Cl-6.1 (g)(Adhesive performance)	-	5000	For cl 6.1
Cl-6.2 (a) 1(Breaking load)	-	12500	For cl 6.2 and 7.5
Cl-6.2 (a) 2(Elongation at break)	-	12500	For cl 6.2 and 7.5
Cl-6.2 (a) 3(Tear strength)	-	12500	For cl 6.2 and 7.5
Cl-6.2 (a) 4(Colour fastness to light)	-	12500	For cl 6.2 and 7.5
Cl-6.2 (a) 5(Colour fastness to rubbing)	-	12500	For cl 6.2 and 7.5
Cl-6.2 (a) 6(Colour fastness to perspiration)	-	12500	For cl 6.2 and 7.5
Cl-6.2 (a) 7(Colour fastness to water)	-	12500	For cl 6.2 and 7.5
Cl-6.2 (a) 8(Pilling resistance)	-	12500	For cl 6.2 and 7.5
Cl-6.2 (a) 9(Coating adhesion strength)	-	12500	For cl 6.2 and 7.5
Cl-6.2 (a) 10(Seam slippage)	-	12500	For cl 6.2 and 7.5
Cl-6.2 (a) 11(Resistance to damage by flexing)	-	12500	For cl 6.2 and 7.5
Cl-6.2 (a) 12(Abrasion resistance)	-	12500	For cl 6.2 and 7.5
Cl-6.2 (a) 13(Bursting strength)	-	12500	For cl 6.2 and 7.5
Cl-6.2 (a) 14(Resistance to cold)	-	12500	For cl 6.2 and 7.5
Cl-6.2 (b) 1(Tear strength)	-	12500	For cl 6.2 and 7.5
Cl-6.2 (b) 2(Flexing endurance)	-	12500	For cl 6.2 and 7.5
Cl-6.2 (b) 3(Finish adhesion)	-	12500	For cl 6.2 and 7.5
Cl-6.2 (b) 4(Colour fastness to artificial light)	-	12500	For cl 6.2 and 7.5
Cl-6.2 (b) 5(Colour fastness to rubbing)	-	12500	For cl 6.2 and 7.5
Cl-6.2 (b) 6(Colour fastness to water spotting)	-	12500	For cl 6.2 and 7.5
Cl-6.2 (b) 7(Water vapour permeability)	-	12500	For cl 6.2 and 7.5
Cl-6.2 (b) 8(Colour fastness to water)	-	12500	For cl 6.2 and 7.5
Cl-7.1(General)	-	8500	For cl 7.1
Cl-7.2.1(Shelves)	-	13000	For cl 7.2
Cl-7.2.2(Tops and Bottoms)	-	13000	For cl 7.2
Cl-7.2.3(Strength of Clothes Rails and their Supports)	-	13000	For cl 7.2
Cl-7.2.4(Strength of the Structure)	-	13000	For cl 7.2
Cl-7.3.1(Pivoted Doors)	-	10000	For cl 7.3 and 7.4
Cl-7.3.2(Sliding Doors and Horizontal Roll-fronts)	-	10000	For cl 7.3 and 7.4
Cl-7.3.3(Flaps)	-	10000	For cl 7.3 and 7.4
Cl-7.3.4(Vertical Roll-Fronts)	-	10000	For cl 7.3 and 7.4
Cl-7.3.5(Extension Elements)	-	10000	For cl 7.3 and 7.4
Cl-7.3.6(Locking and Latching Mechanism Test)	-	10000	For cl 7.3 and 7.4
Cl-7.3.7(Pull Force Test)	-	10000	For cl 7.3 and 7.4
Cl-7.3.8(Top Load Ease Cycle Test)	-	10000	For cl 7.3 and 7.4
Cl-7.3.9(Durability Test for Units with Seating Surfaces – Cyclic Impact)	-	10000	For cl 7.3 and 7.4
Cl-7.3.10(Drop Test – Dynamic – for Units with Seat Surfaces)	-	10000	For cl 7.3 and 7.4
Cl-7.4.1(Units Not Supported by the Floor)	-	10000	For cl 7.3 and 7.4
Cl-7.4.2(Units Supported by the Floor)	-	10000	For cl 7.3 and 7.4
Cl-7.5.1(General)	-	12500	For cl 6.2 and 7.5
Cl-7.5.2(Doors, Extension Elements and Flaps Closed, All Storage Units Unloaded)	-	12500	For cl 6.2 and 7.5
Cl-7.5.3(Opening Doors, Extension Elements and Flaps, All Storage Units Unloaded)	-	12500	For cl 6.2 and 7.5
Cl-7.5.4(Doors, Extension Elements and Flaps Opened and Unlocked)	-	12500	For cl 6.2 and 7.5
Cl-7.5.5(Doors, Extension Elements and Flaps Closed and Locked, All Storage Units Loaded)	-	12500	For cl 6.2 and 7.5
Cl-7.5.6(Vertical Force Stability Test for Storage Units)	-	12500	For cl 6.2 and 7.5
Cl-7.5.7(Stability Test for Pedestals/Storage Units with Seat Surfaces)	-	12500	For cl 6.2 and 7.5
Cl-7.5.8(Dynamic Stability Test for Units with Castors)	-	12500	For cl 6.2 and 7.5
Cl-7.5.9(Strength Test for Wall Attachments)	-	12500	For cl 6.2 and 7.5
Cl-9(Marking)	-	5000	For cl 5 and 9

-
-

IS 1783 : Part 2 (2014)

Drums large, fixed ends - Specification: Part 2 grade B drums (Fourth Revision)

42200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Capacity)	-	600	-
5(Dimensions (Type 1 C Drums Figure 1))	-	1050	-
5(Dimensions (Type 1 C Drums Figure 1))	-	1050	-
5(Dimensions (Type 1 C Drums Figure 1))	-	1050	-
5(Dimensions (Type 1 C Drums Figure 1))	-	1050	-
5(Dimensions (Type 1 C Drums Figure 1))	-	1050	-
5(Dimensions (Type 1 C Drums Figure 1))	-	1050	-
5(Dimensions (Type 1 C Drums Figure 1))	-	1050	-
5(Dimensions (Type 1 C Drums Figure 1))	-	1050	-
5(Dimensions (Type 1 D Drums Figure 1))	-	1050	-
5(Dimensions (Type 1 D Drums Figure 1))	-	1050	-
5(Dimensions (Type 1 D Drums Figure 1))	-	1050	-
5(Dimensions (Type 1 D Drums Figure 1))	-	1050	-
5(Dimensions (Type 1 D Drums Figure 1))	-	1050	-
5(Dimensions (Type 1 D Drums Figure 1))	-	1050	-
5(Dimensions (Type 1 D Drums Figure 1))	-	1050	-
5(Dimensions (Type 1 D Drums Figure 1))	-	1050	-
5(Dimensions (Type 1 C Drums Figure 2))	-	1050	-
5(Dimensions (Type 1 C Drums Figure 2))	-	1050	-
5(Dimensions (Type 1 C Drums Figure 2))	-	1050	-
5(Dimensions (Type 1 C Drums Figure 2))	-	1050	-
5(Dimensions (Type 1 C Drums Figure 2))	-	1050	-
5(Dimensions (Type 1 C Drums Figure 2))	-	1050	-
5(Dimensions (Type 1 C Drums Figure 2))	-	1050	-
5(Dimensions (Type 1 C Drums Figure 2))	-	1050	-
5(Dimensions (Type 1 D Drums Figure 2))	-	1050	-
5(Dimensions (Type 1 D Drums Figure 2))	-	1050	-
5(Dimensions (Type 1 D Drums Figure 2))	-	1050	-
5(Dimensions (Type 1 D Drums Figure 2))	-	1050	-
5(Dimensions (Type 1 D Drums Figure 2))	-	1050	-
5(Dimensions (Type 1 D Drums Figure 2))	-	1050	-
5(Dimensions (Type 1 D Drums Figure 2))	-	1050	-
5(Dimensions (Type 1 D Drums Figure 2))	-	1050	-
6(Material)	-	550	-
7(Construction)	-	600	-
7.1(Construction)	-	600	-
7.2(Construction)	-	600	-
7.3(Construction)	-	600	-
7.4(Construction)	-	600	-
7.5(Construction)	-	600	-
7.7(Construction)	-	600	-
8(Finish )	-	600	-
9.1(Leakage at air pressure )	-	1000	-
9.2(Drop Test)	-	2700	-
9.3(Hydraulic Pressure Test)	-	1700	-
5(Dimensions (Type 2 C Drums Figure 2))	-	1050	-
5(Dimensions (Type 2 C Drums Figure 2))	-	1050	-
5(Dimensions (Type 2 C Drums Figure 2))	-	1050	-
5(Dimensions (Type 2 C Drums Figure 2))	-	1050	-
5(Dimensions (Type 2 C Drums Figure 2))	-	1050	-
5(Dimensions (Type 2 C Drums Figure 2))	-	1050	-
5(Dimensions (Type 2 C Drums Figure 2))	-	1050	-
5(Dimensions (Type 2 C Drums Figure 2))	-	1050	-
5(Dimensions (Type 2 C Drums Figure 2))	-	1050	-
5(Dimensions (Type 2 C Drums Figure 2))	-	1050	-
5(Dimensions (Type 2 D Drums Figure 2))	-	1050	-
5(Dimensions (Type 2 D Drums Figure 2))	-	1050	-
5(Dimensions (Type 2 D Drums Figure 2))	-	1050	-
5(Dimensions (Type 2 D Drums Figure 2))	-	1050	-
5(Dimensions (Type 2 D Drums Figure 2))	-	1050	-
5(Dimensions (Type 2 D Drums Figure 2))	-	1050	-
5(Dimensions (Type 2 D Drums Figure 2))	-	1050	-
5(Dimensions (Type 2 D Drums Figure 2))	-	1050	-
5(Dimensions (Type 2 D Drums Figure 2))	-	1050	-
5(Dimensions (Type 2 D Drums Figure 2))	-	1050	-
5(Dimensions (Type 2 D Drums Figure 2))	-	1050	-
6(Material)	-	600	-
6(Material)	-	600	-
4(Capacity)	-	-	-
5(Dimensions (Type 1 C Drums Figure 1))	-	-	-
5(Dimensions (Type 1 C Drums Figure 1))	-	-	-
5(Dimensions (Type 1 C Drums Figure 1))	-	-	-
5(Dimensions (Type 1 C Drums Figure 1))	-	-	-
5(Dimensions (Type 1 C Drums Figure 1))	-	-	-
5(Dimensions (Type 1 C Drums Figure 1))	-	-	-
5(Dimensions (Type 1 C Drums Figure 1))	-	-	-
5(Dimensions (Type 1 C Drums Figure 1))	-	-	-
5(Dimensions (Type 1 D Drums Figure 1))	-	-	-
5(Dimensions (Type 1 D Drums Figure 1))	-	-	-
5(Dimensions (Type 1 D Drums Figure 1))	-	-	-
5(Dimensions (Type 1 D Drums Figure 1))	-	-	-
5(Dimensions (Type 1 D Drums Figure 1))	-	-	-
5(Dimensions (Type 1 D Drums Figure 1))	-	-	-
5(Dimensions (Type 1 D Drums Figure 1))	-	-	-
5(Dimensions (Type 1 D Drums Figure 1))	-	-	-
5(Dimensions (Type 1 C Drums Figure 2))	-	-	-
5(Dimensions (Type 1 C Drums Figure 2))	-	-	-
5(Dimensions (Type 1 C Drums Figure 2))	-	-	-
5(Dimensions (Type 1 C Drums Figure 2))	-	-	-
5(Dimensions (Type 1 C Drums Figure 2))	-	-	-
5(Dimensions (Type 1 C Drums Figure 2))	-	-	-
5(Dimensions (Type 1 C Drums Figure 2))	-	-	-
5(Dimensions (Type 1 C Drums Figure 2))	-	-	-
5(Dimensions (Type 1 D Drums Figure 2))	-	-	-
5(Dimensions (Type 1 D Drums Figure 2))	-	-	-
5(Dimensions (Type 1 D Drums Figure 2))	-	-	-
5(Dimensions (Type 1 D Drums Figure 2))	-	-	-
5(Dimensions (Type 1 D Drums Figure 2))	-	-	-
5(Dimensions (Type 1 D Drums Figure 2))	-	-	-
5(Dimensions (Type 1 D Drums Figure 2))	-	-	-
5(Dimensions (Type 1 D Drums Figure 2))	-	-	-
6(Material)	-	-	-
7(Construction)	-	-	-
7.1(Construction)	-	-	-
7.2(Construction)	-	-	-
7.3(Construction)	-	-	-
7.4(Construction)	-	-	-
7.5(Construction)	-	-	-
7.7(Construction)	-	-	-
8(Finish )	-	-	-
9.1(Leakage at air pressure )	-	-	-
9.2(Drop Test)	-	-	-
9.3(Hydraulic Pressure Test)	-	-	-
5(Dimensions (Type 2 C Drums Figure 2))	-	-	-
5(Dimensions (Type 2 C Drums Figure 2))	-	-	-
5(Dimensions (Type 2 C Drums Figure 2))	-	-	-
5(Dimensions (Type 2 C Drums Figure 2))	-	-	-
5(Dimensions (Type 2 C Drums Figure 2))	-	-	-
5(Dimensions (Type 2 C Drums Figure 2))	-	-	-
5(Dimensions (Type 2 C Drums Figure 2))	-	-	-
5(Dimensions (Type 2 C Drums Figure 2))	-	-	-
5(Dimensions (Type 2 C Drums Figure 2))	-	-	-
5(Dimensions (Type 2 C Drums Figure 2))	-	-	-
5(Dimensions (Type 2 D Drums Figure 2))	-	-	-
5(Dimensions (Type 2 D Drums Figure 2))	-	-	-
5(Dimensions (Type 2 D Drums Figure 2))	-	-	-
5(Dimensions (Type 2 D Drums Figure 2))	-	-	-
5(Dimensions (Type 2 D Drums Figure 2))	-	-	-
5(Dimensions (Type 2 D Drums Figure 2))	-	-	-
5(Dimensions (Type 2 D Drums Figure 2))	-	-	-
5(Dimensions (Type 2 D Drums Figure 2))	-	-	-
5(Dimensions (Type 2 D Drums Figure 2))	-	-	-
5(Dimensions (Type 2 D Drums Figure 2))	-	-	-
5(Dimensions (Type 2 D Drums Figure 2))	-	-	-
6(Material)	-	-	-
6(Material)	-	-	-
Cl- 6(C)	-	-	-
Cl- 6(Mn)	-	-	-
Cl- 6(S)	-	-	-
Cl- 6(P)	-	-	-
Cl- 6(Al)	-	-	-
Cl- 6(Si)	-	-	-
Cl- 6(N)	-	-	-
Cl- 6(Cr+Ni+Nb+V+Ti+Mo+B+C)	-	-	-

-
Included w.e.f. 26.02.2026

IS 1783 : Part 1 (2014)

Drums large, fixed ends - Specification: Part 1 grade A drums (Fourth Revision)

39200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Capacity)	-	3000	-
5(Dimensions (Type 1 C Drums Figure 1))	-	500	-
5(Dimensions (Type 1 C Drums Figure 1))	-	500	-
5(Dimensions (Type 1 C Drums Figure 1))	-	500	-
5(Dimensions (Type 1 C Drums Figure 1))	-	500	-
5(Dimensions (Type 1 C Drums Figure 1))	-	500	-
5(Dimensions (Type 1 C Drums Figure 1))	-	500	-
5(Dimensions (Type 1 C Drums Figure 1))	-	500	-
5(Dimensions (Type 1 C Drums Figure 1))	-	500	-
5(Dimensions (Type 1 D Drums Figure 1))	-	500	-
5(Dimensions (Type 1 D Drums Figure 1))	-	500	-
5(Dimensions (Type 1 D Drums Figure 1))	-	500	-
5(Dimensions (Type 1 D Drums Figure 1))	-	500	-
5(Dimensions (Type 1 D Drums Figure 1))	-	500	-
5(Dimensions (Type 1 D Drums Figure 1))	-	500	-
5(Dimensions (Type 1 D Drums Figure 1))	-	500	-
5(Dimensions (Type 1 D Drums Figure 1))	-	500	-
5(Dimensions (Type 1 C Drums Figure 2))	-	500	-
5(Dimensions (Type 1 C Drums Figure 2))	-	500	-
5(Dimensions (Type 1 C Drums Figure 2))	-	500	-
5(Dimensions (Type 1 C Drums Figure 2))	-	500	-
5(Dimensions (Type 1 C Drums Figure 2))	-	500	-
5(Dimensions (Type 1 C Drums Figure 2))	-	500	-
5(Dimensions (Type 1 C Drums Figure 2))	-	500	-
5(Dimensions (Type 1 C Drums Figure 2))	-	500	-
5(Dimensions (Type 1 D Drums Figure 2))	-	500	-
5(Dimensions (Type 1 D Drums Figure 2))	-	500	-
5(Dimensions (Type 1 D Drums Figure 2))	-	500	-
5(Dimensions (Type 1 D Drums Figure 2))	-	500	-
5(Dimensions (Type 1 D Drums Figure 2))	-	500	-
5(Dimensions (Type 1 D Drums Figure 2))	-	500	-
5(Dimensions (Type 1 D Drums Figure 2))	-	0	-
5(Dimensions (Type 1 D Drums Figure 2))	-	0	-
6(Material)	-	3000	-
7.1(Construction)	-	700	-
7.2(Construction)	-	700	-
7.3(Construction)	-	700	-
7.4(Construction)	-	700	-
7.5(Construction)	-	700	-
7.6(Construction)	-	700	-
8(Finish )	-	1000	-
9.1(Leakage at air pressure )	-	3000	-
9.2(Drop Test)	-	2500	-
9.3(Hydraulic Pressure Test)	-	5000	-
8.3(Finish)	-	1000	-
8.2(Finish)	-	1000	-
8.1(Finish)	-	1000	-
7.6(Closures)	-	2500	-
7.6(Closures)	-	2500	-
7.5(CONSTRUCTION)	-	700	-
7.4(CONSTRUCTION)	-	700	-
7.4(CONSTRUCTION)	-	700	-
7.3(CONSTRUCTION)	-	700	-
7.2(CONSTRUCTION)	-	700	-
6, b(Thickness of ends(1.25± 0.09))	-	500	-
5, Fig 2(Type 2 D(h3: 4 min))	-	500	-
5, Fig 2(Type 2 D(D1: 571.5 ± 2))	-	1000	-
5, Fig 2(Type 2 C(h3: 4 min))	-	0	-
5, Fig 2(Type 2 C( D1: 571.5 ± 2))	-	0	-
5, Fig 1(Type 1 D(h3: 4 min))	-	0	-
5, Fig 1(Type 1 D(D1: 571.5 ± 2))	-	0	-
5, Fig 1(Type 1 C(h3: 4 min))	-	0	-
5, Fig 1(Type 1 C( D1: 571.5 ± 2))	-	0	-
5(Dimensions (Type 2 C Drums Figure 2))	-	500	-
5(Dimensions (Type 2 C Drums Figure 2))	-	500	-
5(Dimensions (Type 2 C Drums Figure 2))	-	500	-
5(Dimensions (Type 2 C Drums Figure 2))	-	500	-
5(Dimensions (Type 2 C Drums Figure 2))	-	500	-
5(Dimensions (Type 2 C Drums Figure 2))	-	500	-
5(Dimensions (Type 2 C Drums Figure 2))	-	500	-
5(Dimensions (Type 2 C Drums Figure 2))	-	500	-
5(Dimensions (Type 2 D Drums Figure 2))	-	500	-
5(Dimensions (Type 2 D Drums Figure 2))	-	500	-
Dimensions (Type 2 D Drums Figure 2)(D3 Diameter over chime 585 Max)	-	500	-
5(Dimensions (Type 2 D Drums Figure 2))	-	500	-
5(Dimensions (Type 2 D Drums Figure 2))	-	500	-
5(Dimensions (Type 2 D Drums Figure 2))	-	500	-
5(Dimensions (Type 2 D Drums Figure 2))	-	500	-
5(Dimensions (Type 2 D Drums Figure 2))	-	500	-
6(Material)	-	0	-

-
Included w.e.f. 26.02.2026

IS 2547 : Part 1 (1976)

Specification for gypsum building plaster: Part 1 excluding premixed lightweight plasters

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.1, Table-1(Beta hemihydrate, SO3)	-	8000	-
Clause 4.1, Table-1(Beta hemihydrate, CaO)	-	8000	-
Clause 4.1, Table-1(Beta hemihydrate, Soluble magnesium salts as MgO)	-	8000	-
Clause 4.1, Table-1(Beta hemihydrate, Soluble sodium salts as Na2O)	-	8000	-
Clause 4.1, Table-1(Beta hemihydrate,. Loss of ignition)	-	8000	-
Clause 4.1, Table-1(Retarded Hemihydrate Gypsum Plaster, SO3)	-	8000	-
Clause 4.1, Table-1(Retarded Hemihydrate Gypsum Plaster, CaO)	-	8000	-
Clause 4.1, Table-1(Retarded Hemihydrate Gypsum Plaster, Soluble magnesium salts as MgO)	-	8000	-
Clause 4.1, Table-1(Retarded Hemihydrate Gypsum Plaster, Soluble sodium salts as Na2O)	-	8000	-
Clause 4.1, Table-1(Retarded Hemihydrate Gypsum Plaster, Loss of ignition)	-	8000	-
Clause 4.1, Table-1(Retarded Hemihydrate Gypsum Plaster, Free lime)	-	8000	-
Clause 4.1, Table-1(Anhydrous Gypsum plaster,. SO3)	-	8000	-
Clause 4.1, Table-1(Anhydrous Gypsum plaster,. CaO)	-	8000	-
Clause 4.1, Table-1(Anhydrous Gypsum plaster,. Soluble magnesium salts as MgO)	-	8000	-
Clause 4.1, Table-1(Anhydrous Gypsum plaster,. Soluble sodium salts as Na2O)	-	8000	-
Clause 4.1, Table-1(Anhydrous Gypsum plaster,. Loss on ignition)	-	8000	-
Clause 4.1, Table-1(Keene's Plaster, SO3)	-	8000	-
Clause 4.1, Table-1(Keene's Plaster, CaO)	-	8000	-
Clause 4.1, Table-1(Keene's Plaster, Soluble magnesium salts as MgO)	-	8000	-
Clause 4.1, Table-1(Keene's Plaster, Soluble sodium salts as Na2O)	-	8000	-
Clause 4.1, Table-1(Keene's Plaster, Loss of ignition)	-	8000	-
Cl 5.2, Table 2(Plaster Sand Mixture & Neat Plaster)	-	8000	-
Cl 5.2, Table 3(Transverse Strength)	-	8000	-
Cl 5.2, Table 4(Soundness)	-	8000	-
Cl 5.2, Table 5(Mechanical Resistance Of Set Neat Plaster )	-	8000	-
Cl 5.2, Table 6(Residue On 1.18 mm IS Sieve Precent)	-	8000	-
Cl 5.2, Table 7(Expansion On Setting %Max)	-	8000	-
Cl 5.2, Table 7(Expansion On Setting %Max)	-	8000	-
Cl 5.2, Table 6(Residue On 1.18 mm IS Sieve Precent)	-	8000	-
Cl 5.2, Table 5(Mechanical Resistance Of Set Neat Plaster )	-	8000	-
Cl 5.2, Table 4(Soundness)	-	8000	-
Cl 5.2, Table 3(Transverse Strength)	-	8000	-
Cl 5.2, Table 2(Plaster Sand Mixture & Neat Plaster)	-	8000	-
5.1(Purity)	-	8000	-

-
Included w.e.f. 26.02.2026

IS 2095 : Part 3 (2022)

Gypsum Plaster Boards - Specification Part 3 Reinforced Gypsum Plaster Boards Tiles Cornices and Mouldings Third Revision of IS 2095 Part 3

44000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
(Clause 4.1)("CaS04 . 2H2 O, Min")	-	44000	-
Clause 4.1 (ii))(Free water, percent)	-	44000	-
Clause 4.1 ( iii)(" pH a) Natural (mineral) gypsum b) By-product gypsum")	-	44000	-
Clause 4.1 ( iv)("SiO2 , Max")	-	44000	-
Clause 4.1 ( v)(Chloride content, Max)	-	44000	-
Clause 6.1.1("Dimensions of Gypsum Plaster Thickness, Length, Width (mm) ")	-	44000	-
Clause 6.1.2.1(Tolerance on straightness of edge)	-	44000	-
Clause 6.1.2.2(Tolerance on squarencess of edge)	-	44000	-
Clause 6.3(Density kg/m3)	-	44000	-
Clause 6.4.1(Fibre Reinforced Gypsum Plaster Board)	-	44000	-
Clause 6.4.2(Glass Reinforced Gypsum (GRG) Plaster Board)	-	44000	-
Clause 6.5(Impact Strength N-mm/mm2)	-	44000	-
Clause 6.6(Water Absorption)	-	44000	-
Clause 6.7(Jolting Test)	-	44000	-
Clause 9(MARKING)	-	44000	-

-
Included w.e.f. 26.02.2026

IS 2095 : Part 2 (2022)

Gypsum plaster boards - specification: Part 2 Coated laminated gypsum plaster boards Third Revision of IS 2095 Part 2

40500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.1 ( i)("CaS04 . 2H2 O, Min")	-	4000	-
Clause 4.1 (ii))(Free water, percent)	-	3000	-
Clause 4.1 ( iii)(" pH a) Natural (mineral) gypsum b) By-product gypsum")	-	4000	-
Clause 4.1 ( iv)("SiO2 , Max")	-	0	-
Clause 4.1 ( v)(Chloride content, Max)	-	0	-
(Clause 6.1.1)(Dimensions - Width,Length, Thickness (mm))	-	5000	-
(Clause 6.1.2)(Tolerance on Shape)	-	5000	-
(Clause 6.2)(Density)	-	3500	-
(Clause 6.3)(" Flexural Breaking Load ")	-	5000	-
(Clause 6.4)(Fire Resistance)	-	6500	-
(Clause 6.5)("Finish ")	-	0	-
(Clauses 7.1.2 )(Sampling of Gypsum Plaster Board)	-	0	-

-
Included w.e.f. 26.02.2026

IS 2095 : Part 1 (2023)

Gypsum Plaster Boards Specification Part 1 Plain Gypsum Plaster Boards

41000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 5.0(CaSO4.2H2O)	-	2500	-
Clause. 5.0(Free water (Natural / By -product))	-	2000	-
Clause. 5.0(pHvalue (Natural / By -product))	-	15000	-
Clause. 5.0(SiO2)	-	2500	-
Clause. 5.0(Chloride content)	-	2500	-
Clause. 6.0(Manufacturing)	-	500	-
Clause. 7.0(Dimensions)	-	3000	-
Clause. 7.0(Tolerances)	-	4000	-
Clause. 7.0(Density)	-	2500	-
Clause. 7.0(Flexural Breaking Load)	-	5000	-
Clause. 7.0(Impact Resistance)	-	5000	-
Clause. 7.0(Surface Hardness)	-	2000	-
Clause. 7.0(Loading Capability)	-	3500	-
Clause. 7.0(Water Absorption)	-	2000	-
Clause. 7.0(Fire Resistance)	-	500	-
Clause. 7.0(Finish)	-	2000	-
Cl-5.3(Paper Liner)	-	3000	-
Clause 7.1(Dimensions)	-	2500	-
(Clause 7.2)(Density)	-	5000	-
(Clause 7.3)(Flexural Load)	-	0	-
(Clause 7.4)(Impact Resistance)	-	0	-
(Clause 7.5)(Surface Hardness)	-	0	-
(Clause 7.6)(Loading Capability)	-	0	-
(Clause 7.7)(Water Absorption)	-	0	-
(Clause 7.8)(Fire Resistance)	-	0	-

-
Included w.e.f. 26.02.2026

IS 17876 (2022)

Stainless steel welded pipes and tubes for general service

22500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.0 (Table No.- 1)(Chemical Composition,% - IS 228)	-	3500	For complete chemical
10.1 (Table No.- 4)(Tensile Test,Mpa)	-	8000	For complete mechanical test
11(Transverse Tension Test,%)	-	1500	-
12 (Table No.- 5)(Hardness Test,HRC,HRB&BHN- IS 1500 (Part 1) or IS 1586 (Part 1))	-	500	-
13 (Table No.- 7)(Flange Test-IS 2330)	-	0	-
14(Reverse Flattaning Test)	-	1500	-
15(Flattaning Test-IS 2328)	-	1500	-
16 (Table No.- 8)(Grain Size,No.-IS 4748)	-	1500	-
18(Leak Tighteness Test)	-	2500	-
19("Corrosion Test-IS 10461 (Part 1) or IS 10461 (Part 2)")	-	3000	-
20(Eddy current test, Air under water test ,Radiographic tests)	-	0	-
22(Workmanship, Finish and Appearance)	-	500	For complete qualitative tests
23(Repair by Welding or Grinding)	-	0	-
24 (Table No.- 9,10&11)(Dimensions and Tolerances,mm)	-	8000	For complete mechanical tests
"Clause 8.1 and 8.2 - Table 1"(Carbon)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Silicon)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Mangnese)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Nickel)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Chromium)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Molybdenum)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Sulphur)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Phosphorous)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Nitrogen)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Copper)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Aluminium)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Titanium)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Niobium)	-	0	-
"Clause 19 IS 10461(Part 1)"(Corrosion Test)	-	0	-
Clause 10.1 - Table 4(Tensile Strength)	-	0	-
Clause 10.1 - Table 4(Yield Strength)	-	0	-
Clause 10.1 - Table 4(Percent Elongation)	-	0	-
Clause 11(Transverse Tension Test)	-	0	-
Clause 12(Hardness Test)	-	0	-
Clause 13(Flange Test)	-	0	-
Clause 14(Reverse Flattening Test)	-	0	-
Clause 15(Flattening Test)	-	0	-
Clause 16(Grain Size)	-	0	-
Clause 18()	-	0	-
"Clause 19 IS 10461(Part 2)"(Corrosion Test)	-	0	-
Clause 22(Workmanship, Finish & Appearance)	-	0	-
Clause 24 Annexure A, Table 9 Table 10(Dimensions & Tolerances)	-	0	-
8.1 & 8.2 (Table No.- 1)(Vanadium (V))	-	0	-
8.1 & 8.2 (Table No.- 1)(Tungstun (W))	-	0	-
8.1 & 8.2 (Table No.- 1)(Tantalum (Ta))	-	0	-
12.2(Hardness test)	-	0	-
17(Sampling)	-	0	-
25(Marking)	-	0	-
6.7, Table 7, ii)(c) Chromium VI)	-	0	-

-
Included w.e.f. 26.02.2026

IS 9763 (2000)

Plastics Bib Taps, Pillar Taps, Angle Valves and Stop Valves for Hot and Cold Water Services -

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
(Cl. 5)(Nominal Size)	-	2500	For Dimensional and qualitative tests
(Cl. 7)(Identification)	-	2500	For Dimensional and qualitative tests
(Cl. 7)(Identification)	-	2500	For Dimensional and qualitative tests
(Cl. 4)(Materials)	-	2500	For Dimensional and qualitative tests
(Cl.6 , Table 3)(Dimensions)	-	2500	For Dimensional and qualitative tests
(Cl 8)(Construction,Workmanship and Finish)	-	2500	For Dimensional and qualitative tests
(Cl 8)(Construction,Workmanship and Finish)	-	2500	For Dimensional and qualitative tests
(Cl 8)(Construction,Workmanship and Finish)	-	2500	For Dimensional and qualitative tests
(Cl 8)(Construction,Workmanship and Finish)	-	2500	For Dimensional and qualitative tests
(Cl 8)(Construction,Workmanship and Finish)	-	2500	For Dimensional and qualitative tests
(Cl 8.4)(Minimum Thickness)	-	2500	For Dimensional and qualitative tests
(Cl. 8.5)(Finish)	-	2500	For Dimensional and qualitative tests
(Cl 9.1)(Resistance to Residual Chlorine in Water)	-	1000	-
(Cl 9.2)(Drip Proofness Test)	-	1000	-
(Cl 9.3)(Thermal Shock Test )	-	1000	-
(Cl 9.4)(Hydraulic Pressure Test)	-	3000	For Hydrostatic and mechanical strength tests
(Cl 9.5)(Mechanical Strength Characteristics)	-	3000	For Hydrostatic and mechanical strength tests

-
Included w.e.f. 26.02.2026

IS 14735 (1999)

Unplasticized Polyvinyl Chloride (UPVC) Injection Moulded Fittings for Soil and Waste Discharge System for Inside and Outside Buildings Including Ventilation and Rain Water System -

12800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
19(Marking)	-	500	For complete qualitative tests
3(Type of Fitting)	-	500	For complete qualitative tests
4(Size Designation)	-	500	For complete qualitative tests
5(Colour of fittings)	-	500	For complete qualitative tests
7.1,Table 1(Wall thickness)	-	1500	For complete dimensional tests
7.2 ,Table 2&3(Socket Dimensions)	-	1500	For complete dimensional tests
7.3(Dimensions of waste trap(Nahani Trap)	-	1500	For complete dimensional tests
8(Sealing Rings)	-	1500	For complete dimensional tests
10(Workmanship)	-	500	For complete qualitative tests
11(Design requirements)	-	500	For complete qualitative tests
11.1(Solvent cement type or Rubber ring type)	-	500	For complete qualitative tests
11.2(Socket and spigot configeration)	-	500	For complete qualitative tests
11.4,Table 5(Vent cowl)	-	500	For complete qualitative tests
11.5,Table 6(Pipe Clips)	-	500	For complete qualitative tests
12(Physical test requirements)	-	500	For complete qualitative tests
12.1(Visual appearance)	-	500	For complete qualitative tests
12.2(Stress relief test)	-	2500	-
12.3(Vicat softening tempewrature)	-	2500	-
Cl.13, IS 12235 (P-7)-2004, (Resistance to Sulphuric Acid)	-	2000	-
Cl.14, Annex A(Titanium Di-Oxide Content)	-	1000	-
Cl.15, Annex B(Sulphated Ash Content)	-	1000	-
16(Mechanical Properties)	-	2000	For complete mechanical tests
16.1(Impact test)	-	2000	For complete mechanical tests
17(Watet tightness of joint)	-	2000	For complete mechanical tests
12.4(Effect on water test)	-	5000	additional, if required (For complete effect on water test parameters)
7.4(Chamfer)	-	1500	For complete dimensional tests
11.3(Access Openings)	-	500	For complete qualitative tests
Table 4(Dimension of Access Openings)	-	1500	For complete dimensional tests
Cl 12.4(Effect on Water Lead (first extraction))	-	5000	additional, if required (For complete effect on water test parameters)
Cl 12.4(Effect on Water Lead (third extraction))	-	5000	additional, if required (For complete effect on water test parameters)
Cl 12.4(Effect on Water Dialkyl tin C4 and higher homologues(measured as tin )(third extraction ))	-	5000	additional, if required (For complete effect on water test parameters)
Cl 12.4(Effect on Water Cadmium (mean of first extraction, second extraction and third extraction))	-	5000	additional, if required (For complete effect on water test parameters)
Cl 12.4(Effect on Water Mercury (mean of first extraction, second extraction and third extraction))	-	5000	additional, if required (For complete effect on water test parameters)
19(Marking)	-	500	For complete qualitative tests
3(Type of Fitting)	-	0	-
4(Size Designation)	-	0	-
5(Colour of fittings)	-	0	-
7.1,Table 1(Wall thickness)	-	0	-
7.2 ,Table 2&3(Socket Dimensions)	-	0	-
7.3(Dimensions of waste trap(Nahani Trap)	-	0	-
8(Sealing Rings)	-	0	-
10(Workmanship)	-	0	-
11(Design requirements)	-	0	-
11.1(Solvent cement type or Rubber ring type)	-	0	-
11.2(Socket and spigot configeration)	-	0	-
11.4,Table 5(Vent cowl)	-	0	-
11.5,Table 6(Pipe Clips)	-	0	-
12(Physical test requirements)	-	0	-
12.1(Visual appearance)	-	0	-
12.2(Stress relief test)	-	0	-
12.3(Vicat softening tempewrature)	-	0	-
Cl.13, IS 12235 (P-7)-2004, (Resistance to Sulphuric Acid)	-	0	-
Cl.14, Annex A(Titanium Di-Oxide Content)	-	0	-
Cl.15, Annex B(Sulphated Ash Content)	-	0	-
16(Mechanical Properties)	-	0	-
16.1(Impact test)	-	0	-
17(Watet tightness of joint)	-	0	-
12.4(Effect on water test)	-	0	-
7.4(Chamfer)	-	0	-
11.3(Access Openings)	-	0	-
Table 4(Dimension of Access Openings)	-	0	-
Cl 12.4(Effect on Water Lead (first extraction))	-	0	-
Cl 12.4(Effect on Water Lead (third extraction))	-	0	-
Cl 12.4(Effect on Water Dialkyl tin C4 and higher homologues(measured as tin )(third extraction ))	-	0	-
Cl 12.4(Effect on Water Cadmium (mean of first extraction, second extraction and third extraction))	-	0	-
Cl 12.4(Effect on Water Mercury (mean of first extraction, second extraction and third extraction))	-	0	-

-
included w.e.f 24.02.2026

IS 16014 (2024)

MECHANICALLY WOVEN DOUBLE-TWISTED HEXAGONAL WIRE MESH GABIONS REVET MATTRESSES ROCK FALL NETTING AND OTHER PRODUCTS FOR CIVIL ENGINEERING PURPOSES GALVANIZED STEEL WIRE OR GALVANIZED STEEL WIRE WITH POLYMER COATING SPECIFICATION ( Second Revision )

310000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(Material and Manufacture)	-	1000	-
Cl-5.1.1(Class 1 double-twisted mesh)	-	1000	-
Cl-5.1.2(Class 2 double-twisted mesh)	-	1000	-
Cl-5.4.1(Galvanized Rings)	-	3000	-
Cl-5.4.2(Stainless Steel Fasteners)	-	3000	-
Cl-6.1(Tensile Strength)	-	6000	-
Cl-6.2, Table-7 (i)(Mesh wire dia, mm)	-	6000	-
Cl-6.2, Table-7 (ii)(Tensile Strength Parallel to twist, kN/m)	-	6000	-
Cl-5.3(Lacing wire and stiffeners)	-	6000	-
Cl-7.1.1(Mass of Zinc/Zinc Alloy Coating)	-	4500	-
Cl-7.1.2(Adhesion of Zinc/Zinc Alloy Coating)	-	4000	-
Cl-7.1.3(Ageing and Corrosion Resistance)	-	4000	-
Cl-7.2 (a)(Specific gravity)	-	2000	-
Cl-7.2 (b)(Tensile strength)	-	3500	-
Cl-7.2 (c)(Hardness)	-	3500	-
Cl-7.2 (d)(Resistance of polymer coating to sodium chloride solution)	-	2500	-
Cl-7.2 (e)(Salt spray exposure)	-	4000	-
Cl-7.2 (f)(Modulus of Elasticity)	-	4000	-
Cl-7.2 (g)(Brittleness Temperature)	-	4000	-
Cl-7.2 (h)(Resistance to UV rays)	-	82000	-
Cl-8.12(Mesh Opening Tolerances)	-	2000	-
Cl-9(Workmanship)	-	500	-
Cl-12.1(Tensile Strength of Wire Mesh Panel)	-	5000	-
Cl-12.2(Punch Test)	-	5000	-
Cl-12.3(Pull-Apart Resistance Test/Selvedge Strength Test/Panel to Panel Connection)	-	5000	-
Cl-12.4(Metallic Coating Mass)	-	5000	-
Cl-12.5(Polymer Coating Thickness)	-	5000	-
Cl-12.6(Polymer Coating)	-	5000	-
Cl-12.7.1(Abrasion Resistance Test)	-	5000	-
Cl-12.7.2(Corrosion Spread Test)	-	5000	-
Cl-5.5, 8.1, 8.2, 8.9, Table-1,2, 3, 4, 5, (i)(Mesh wire dia, mm)	-	500	-
Cl-5.5, 8.1, 8.2, 8.9, Table-1,2, 3, 4, 5, (ii)(Edge/Selvedge wire dia, mm)	-	500	-
Cl-5.5, 8.1, 8.2, 8.9, Table-1,2, 3, 4, 5, (iii)(Lacing wire dia, mm)	-	500	-
Cl-5.5, 8.1, 8.2, 8.9, Table-1,2, 3, 4, 5, (iv)(Polymer coating thickness,mm)	-	500	-
Cl-5.5, 8.1, 8.2, 8.9, Table-1,2, 3, 4, 5, (v)(Typical sizes Length ×Width × Height(m))	-	500	-
Cl-5.5, 8.1, 8.2, 8.9, Table-1,2, 3, 4, 5, (vi)(Tolerances in size of Units)	-	500	-
Cl-5.5, 8.1, 8.2, 8.11, Table-6 (i)(Mesh wire dia, mm)	-	500	-
Cl-5.5, 8.1, 8.2, 8.11, Table-6 (ii)(Edge/Selvedge wire dia, mm)	-	500	-
Cl-5.5, 8.1, 8.2, 8.11, Table-6 (iii)(Lacing wire dia, mm)	-	500	-
Cl-5.5, 8.1, 8.2, 8.11, Table-6 (iv)(Polymer coating thickness, mm)	-	500	-
Cl-5.5, 8.1, 8.2, 8.11, Table-6 (v)(Typical size Length × Width)	-	500	-
Cl-5.5, 8.1, 8.2, 8.11, Table-6 (vi)(Tolerances in size of netting rolls)	-	500	-
Cl-6.2, 11.2, 12.2 (b), Table-7 (i)(Mesh wire dia,)	-	500	-
Cl-6.2, 11.2, 12.2 (b), Table-7 (ii)(Tensile Strength Parallel to twist,)	-	3000	-
Cl-6.2, 11.2, 12.2 (b), Table-7 (iii)(Tensile Strength Perpendicular to twist, kN/m)	-	3000	-
Cl-6.2, 11.2, 12.2 (b), Table-7 (iv)(Selvedge Strength, kN/m)	-	3500	-
Cl-6.2, 11.2, 12.2 (b), Table-7 (v)(Punch Strength, kN)	-	4000	-
Cl-6.2, 11.2, 12.2 (b), Table-7 (vi)(Panel to panel connection(lacing wire/ fasteners), kN/m)	-	4000	-
Cl-13(Marking)	-	500	-

-
Included w.e.f. 26.02.2026

IS 4621 (1975)

Specification for indicating bolts for use in public baths and lavatories (First Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4(DIMENSIONS AND TOLERANCES)	-	2000	-
Clause 7(WORKMANSHIP AND FINISH)	-	2000	-
Clause 4.1(Dimension and tolerance)	-	2000	-
Clause 5.2 Table 2(i)(Body, knob and indicating spindle)	-	2000	-
Clause 5.2 Table 2(ii)(Indicating disc)	-	2000	-
Clause 5.2 Table 2(iii)(Gears)	-	2000	-
Clause 7(Workmanship and finish)	-	2000	-
Clause 8(Marking)	-	400	-
Clause 9(Packing)	-	400	-
Cl-6(Manufacture)	-	200	-
5.0 Table -2(Tensile strength)	-	4000	-
IS 1868, Cl 10.0(Sulphur Dioxide test)	-	4000	-
Cl .5 Table-2(Elongation)	-	4000	-
IS 1868, cl 14(Resistance to crazing deformation)	-	4000	-
IS 1868, cl. 16(Light Reflection Property)	-	4000	-
IS 1868, cl. 15.0(Fastness of light)	-	4000	-
IS 1868, cl. 17.0(Electrical Breakdown Potential)	-	4000	-
IS 1868, cl. 18(continuity of the Anodizing Coating)	-	4000	-
IS 1868, cl. 12.0(Corrosion Resistance)	-	4000	-
IS 1868, cl. 12(CASS Test)	-	4000	-
IS 1868, cl. 12(AAS Test)	-	4000	-
IS 1868, cl. 13.0(Abrasion Resistance)	-	4000	-
Cl-5.0, Table-2(Tensile Strength)	-	4000	-
Cl-5.0, Table-2(Elongation)	-	4000	-
IS:1868, Clause-10.0(Sulphur Dioxide Test)	-	4000	-
IS:1868, Clause-14.0(Resistance to crazing deformation)	-	4000	-
IS:1868, Clause-16.0(Light reflection property)	-	4000	-
IS:1868, Clause-15.0(Fastness to light)	-	4000	-
IS:1868, Clause-15.0(Fastness to light)	-	4000	-
IS:1868, Clause-17.0(Electrical Breakdown Potential)	-	4000	-
IS:1868, Clause-18.0(Continuity of the Anodizing Coating)	-	4000	-
IS:1868, Clause-12.0(Corrosion Resistance)	-	4000	-
IS:1868, Clause-12.0(CASS Test)	-	4000	-
IS:1868, Clause-12.0(AAS Test)	-	4000	-
IS:1868, Clause-13.0(Abrasion Resistance)	-	4000	-

-
included w.e.f 24.02.2026

IS 1328 (2025)

Veneered Decorative Plywood - Specification ( Fourth Revision )

Type 1 & Type 2

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 4.1(Grades)	-	10000		-

-
-

IS 2191 : Part 2 (2022)

WOODEN FLUSH DOOR SHUTTERS (CELLULAR, HOLLOW AND TUBULAR CORE TYPE) - SPECIFICATION PART 2 PARTICLE BOARD, HIGH DENSITY FIBRE BOARD, MEDIUM DENSITY FIBRE BOARD AND FIBRE HARDBOARD FACE PANELS (Fourth Revision)

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(Sizes and Tolerances)	-	2000	-
Cl-6.1.(Timber)	-	2000	-
Cl-6.2(Laminated veneer lumber (LVL), veneer laminated lumber (VLL), medium density fibre board (MDF), high density fibre board (HDF))	-	2000	-
Cl-6.3.1(Particle board)	-	2000	-
Cl-6.3.2(MDF board and HDF board)	-	2000	-
Cl-6.3.5(shutters with fibre hardboard face)	-	2000	-
Cl-8.1(Locks)	-	2000	-
Cl-10.1(various test)	-	2000	-
Cl-10.2(End Immersion Test)	-	4900	-
Cl-10.3(Glue Adhesion Test)	-	4500	-
Cl-13(Marking)	-	4500	-

-
included w.e.f 17.02.2026

IS 15961 (2025)

Hot Dip Aluminium-Zinc Alloy Metallic Coated Steel Strip and Sheet - Specification (First Revision)

19800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3.5(Surface Finish)	-	19800	For complete testing
Cl-4(Supply of Material - General requirements)	-	19800	For complete testing
Cl-5(Manufacture)	-	19800	For complete testing
Cl-7(C)	-	19800	For complete testing
Cl-7(Mn)	-	19800	For complete testing
Cl-7(S)	-	19800	For complete testing
Cl-7(P)	-	19800	For complete testing
Cl-7(Total aluminium)	-	19800	For complete testing
Cl-7(silicon)	-	19800	For complete testing
Cl-7(Nitrogen)	-	19800	For complete testing
Cl-7(Chromium,)	-	19800	For complete testing
Cl-7(Nickel,)	-	19800	For complete testing
Cl-7(Niobium,)	-	19800	For complete testing
Cl-7(Vanadium,)	-	19800	For complete testing
Cl-7(Titanium,)	-	19800	For complete testing
Cl-7(Molybdenum,)	-	19800	For complete testing
Cl-7(Boron,)	-	19800	For complete testing
Cl-7(Calcium)	-	19800	For complete testing
Cl-7(others,)	-	19800	For complete testing
Cl-7(Phosphorus)	-	19800	For complete testing
Cl-8.1(Test Piece)	-	19800	For complete testing
Cl-8.2(Testing Frequency)	-	19800	For complete testing
Cl-8.3, Table-1(Yield Strength)	-	19800	For complete testing
Cl-8.3, Table-1(Tensile Strength)	-	19800	For complete testing
Cl-8.3, Table-1(Elongation,)	-	19800	For complete testing
Cl-9(Coating Test)	-	19800	For complete testing
Cl-9.1, Table-2(Minimum Coating Mass (Total Both Surfaces)- Triple Spot)	-	19800	For complete testing
Cl-9.1, Table-2(Minimum Coating Mass (Total Both Surfaces)- Single Spot)	-	19800	For complete testing
Cl-9.1, Table-2(Minimum Coating Mass (One Surface) -Single Spot)	-	19800	For complete testing
Cl-9.4(Single Spot Coating Mass)	-	19800	For complete testing
Cl-9.5(Triple Spot Coating Mass)	-	19800	For complete testing
Cl-9.6(Differential Coating)	-	19800	For complete testing
Cl-10(Coating Adhesion Test)	-	19800	For complete testing
Cl-11(Freedom From Defects)	-	19800	For complete testing
Cl-12(Mass)	-	19800	For complete testing
Cl-13.1(Coil Internal Diameter)	-	19800	For complete testing
Cl-13.2(Length Tolerance)	-	19800	For complete testing
Cl-13.3(Width Tolerance)	-	19800	For complete testing
Cl-13.4(Thickness Tolerance)	-	19800	For complete testing
Cl-13.5(Camber)	-	19800	For complete testing
Cl-13.6(Deviation from Squareness (Out-of Square))	-	19800	For complete testing
Cl-13.7(Deviation from Flatness (Steepness))	-	19800	For complete testing
Cl-13.8(Profiled Sheets)	-	19800	For complete testing
Cl-16(Marking)	-	19800	For complete testing
Cl-3.5(Surface Finish)	-	-	-
Cl-4(Supply of Material - General requirements)	-	-	-
Cl-5(Manufacture)	-	-	-
Cl-7(C)	-	-	-
Cl-7(Mn)	-	-	-
Cl-7(S)	-	-	-
Cl-7(P)	-	-	-
Cl-7(Total aluminium)	-	-	-
Cl-7(silicon)	-	-	-
Cl-7(Nitrogen)	-	-	-
Cl-7(Chromium,)	-	-	-
Cl-7(Nickel,)	-	-	-
Cl-7(Niobium,)	-	-	-
Cl-7(Vanadium,)	-	-	-
Cl-7(Titanium,)	-	-	-
Cl-7(Molybdenum,)	-	-	-
Cl-7(Boron,)	-	-	-
Cl-7(Calcium)	-	-	-
Cl-7(others,)	-	-	-
Cl-7(Phosphorus)	-	-	-
Cl-8.1(Test Piece)	-	-	-
Cl-8.2(Testing Frequency)	-	-	-
Cl-8.3, Table-1(Yield Strength)	-	-	-
Cl-8.3, Table-1(Tensile Strength)	-	-	-
Cl-8.3, Table-1(Elongation,)	-	-	-
Cl-9(Coating Test)	-	-	-
Cl-9.1, Table-2(Minimum Coating Mass (Total Both Surfaces)- Triple Spot)	-	-	-
Cl-9.1, Table-2(Minimum Coating Mass (Total Both Surfaces)- Single Spot)	-	-	-
Cl-9.1, Table-2(Minimum Coating Mass (One Surface) -Single Spot)	-	-	-
Cl-9.4(Single Spot Coating Mass)	-	-	-
Cl-9.5(Triple Spot Coating Mass)	-	-	-
Cl-9.6(Differential Coating)	-	-	-
Cl-10(Coating Adhesion Test)	-	-	-
Cl-11(Freedom From Defects)	-	-	-
Cl-12(Mass)	-	-	-
Cl-13.1(Coil Internal Diameter)	-	-	-
Cl-13.2(Length Tolerance)	-	-	-
Cl-13.3(Width Tolerance)	-	-	-
Cl-13.4(Thickness Tolerance)	-	-	-
Cl-13.5(Camber)	-	-	-
Cl-13.6(Deviation from Squareness (Out-of Square))	-	-	-
Cl-13.7(Deviation from Flatness (Steepness))	-	-	-
Cl-13.8(Profiled Sheets)	-	-	-
Cl-16(Marking)	-	-	-

-
included w.e.f 17.02.2026

1
2
3
Next
Last

Bureau of Indian Standards

The National Standards Body of India

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

PLOT NO. 27, STREET NO. 2, ADJOINING FOCAL POINT ROAD, TRANSPORT NAGAR, JALANDHAR, PUNJAB, JALANDHAR, Jalandhar, Punjab, 144004

9988862929 jbstestingsolutions@gmail.com

Scope List