BIS - LIMS (Laboratory Information Management System)

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

PLOT NO. 27, STREET NO. 2, ADJOINING FOCAL POINT ROAD, TRANSPORT NAGAR, JALANDHAR, PUNJAB, JALANDHAR, Jalandhar, Punjab, 144004

9988862929 jbstestingsolutions@gmail.com

Scope List

Reset

336 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

331

IS 13095 (2020)

Butterfly Valves for General Purposes ( First Revision )

50 mm to 650 mm

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0( NOMINAL SIZES )	-	2500	For dimensional and qualitative Tests
7.0(NOMINAL PRESSURES)	-	5000	For complete hydrostatic test
9.1.1 ( Double Flanged Body Ends)	-	2500	For dimensional and qualitative Tests
9.2.2(Wafer Body Ends)	-	2500	For dimensional and qualitative Tests
10.1 -Table1 (FACE TO FACE DIMENSIONS)	-	2500	For dimensional and qualitative Tests
11.0(Bodies)	-	2500	For dimensional and qualitative Tests
12.0(DISC AND SHAFT)	-	2500	For dimensional and qualitative Tests
14.0(BEARINGS)	-	2500	For dimensional and qualitative Tests
14.2(BEARINGS)	-	2500	For dimensional and qualitative Tests
14.3(BEARINGS)	-	2500	For dimensional and qualitative Tests
17.2(Body Test)	-	5000	For complete Hydrostatic Tests
17.4(Disc Strength Test)	-	5000	For complete Hydrostatic Tests
17.3(Seat Test)	-	5000	For complete Hydrostatic Tests
Cl. 15 Table 2(Materials)	-	7500	For each component (CI, Stainless Steel) - If required
6.0( NOMINAL SIZES )	-	2500	For dimensional and qualitative Tests
7.0(NOMINAL PRESSURES)	-	5000	For complete hydrostatic test
9.1.1 ( Double Flanged Body Ends)	-	2500	For dimensional and qualitative Tests
9.2.2(Wafer Body Ends)	-	2500	For dimensional and qualitative Tests
10.1 -Table1 (FACE TO FACE DIMENSIONS)	-	2500	For dimensional and qualitative Tests
11.0(Bodies)	-	2500	For dimensional and qualitative Tests
12.0(DISC AND SHAFT)	-	2500	For dimensional and qualitative Tests
14.0(BEARINGS)	-	2500	For dimensional and qualitative Tests
14.2(BEARINGS)	-	2500	For dimensional and qualitative Tests
14.3(BEARINGS)	-	2500	For dimensional and qualitative Tests
17.2(Body Test)	-	5000	For complete Hydrostatic Tests
17.4(Disc Strength Test)	-	5000	For complete Hydrostatic Tests
17.3(Seat Test)	-	5000	For complete Hydrostatic Tests
Cl. 15 Table 2(Materials)	-	7500	For each component (CI, Stainless Steel) - If required
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Flange-D)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges-IS 6418 (Table 2/3/6/7/10)- Flange-b)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges-IS 6418 (Table 2/3/6/7/10)- Rasied Face-d4)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges-IS 6418 (Table 2/3/6/7/10)- Rasied Face-f)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Bolting )	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Drilling -Nos. )	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Drilling -d2)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Drilling -k)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Neck -d3)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Neck- r)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Flange-D)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Flange-b)	-	2000	--
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Rasied Face-d4)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Rasied Face-f)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Bolting)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Drilling -Nos. )	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Drilling -d2 )	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Drilling -k)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Neck -d3)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Neck-r)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Pipe O.D.- d1)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Flange - D)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Flange - b)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Raised Face - d4)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Raised Face - f)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Bolting)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Drilling - Nos.)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Drilling -d2)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Drilling -k)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Flange -D)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Flange - b)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Raised Face - d4)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Raised Face - f)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Bolting)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Drilling - Nos.)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Drilling -d2)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Drilling -k)	-	2000	-

-
-

332

IS 14329 (1995)

Malleable iron castings - Specification

WM350 and WM400,BM300, BM320 and BM350, PM 450 to PM700

3500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.2.1, 10.1, Table 1(Nominal diameter)	-	250	-
9.2.1, 10.1, Table 1(Tolerances on nominal diameter)	-	2000	-
9.2.1, 10.1, Table 1(Shank Dimensions, Diameter)	-	2000	-
9.2.1, 10.1, Table 1(Shank Dimensions, Length)	-	2000	-
9.2.1, 10.1, Table 1(Gauge length)	-	2000	-
9.2.1, 10.1, Table 1(Length)	-	2000	-
9.2.1, 10.1, Table 1(Radius at shoulder)	-	2000	-
10.1(Tensile Test)	-	2000	-
10.2(Hardness Test)	-	500	-
8.0(FREEDOM FROM DEFECTS)	-	500	For complete hardness and qualitative tests

-
Included w.e.f. 21-09-2022.

333

IS 456 (2000)

Plain and reinforced concrete - Code of practice (Fourth Revision)

Water for Construction Purpose,Compressive strength fo

2500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
16.1(Average Compressive Strength)	-	2500	-
16.1(Average Compressive Strength)	-	2500	-
Cl 5.4 .2(pH)	-	300	-
Cl 5.4 Table 1 (iii)(Sulphate)	-	300	-
Cl 5.4 Table 1 (ii)(Inorganic Solids)	-	300	-
Cl 5.4 Table 1 (i)(Organic Solids)	-	300	-
Cl 5.4 Table 1 (v)(Suspended Matter)	-	300	-
5.4-(b)-IS: 3025 (P-23)(Volume of 0.02 N H2SO4 to neutralized 100 ml of water using mixed indicator)	-	1100	-
5.4-(a)-IS: 3025 (P-22)(Volume of 0.02 N NaOH to neutralized 100 ml of water using phenolphthalein indicator)	-	1100	-
16.1(Average Compressive Strength)	-	2500	-
Cl 5.4 .2(pH)	-	300	-
Cl 5.4 Table 1 (iii)(Sulphate)	-	300	-
Cl 5.4 Table 1 (ii)(Inorganic Solids)	-	300	-
Cl 5.4 Table 1 (i)(Organic Solids)	-	300	-
Cl 5.4 Table 1 (v)(Suspended Matter)	-	300	-
5.4-(b)-IS: 3025 (P-23)(Volume of 0.02 N H2SO4 to neutralized 100 ml of water using mixed indicator)	-	1100	-
5.4-(a)-IS: 3025 (P-22)(Volume of 0.02 N NaOH to neutralized 100 ml of water using phenolphthalein indicator)	-	1100	-
Cl 5.4 Table 1 (iv)(Chloride)	-	300	-

-
Included w.e.f. 21-09-2022.

334

IS 410 (1977)

Specification for cold rolled brass sheet, strip and foil (Third Revision)

Annealed, Quarter Hard, Half Hard, Hard, Extra Hard, Sp

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1.1(Tensile Test)	-	2000	For tensile and elongation test
Table-2(Vickers Hardness)	-	500	-
6.1 Table-1(Cu)	-	2000	-
Table-2(Thickness)	-	750	-
6.1 Table-1(Pb)	-	2000	-
6.1 Table-1(Fe)	-	2000	-
6.1 Table-1(Total impurities including iron)	-	2000	-
6.1 Table-1(Zn)	-	2000	-
4.0(Freedom from defects)	-	2000	-
Table-2(Elongation)	-	2000	For tensile and elongation test

-
Included w.e.f. 21-09-2022.

335

IS 16176 (2014)

Ratchet pipe threader for taper pipe threads (R - Series) - Specification

.½” to 6”

13700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Dimensions)	-	9000	For complete dimensional and qualitative tests.
6.2(Hardness)	-	700	-
9.1(Performance of thread testing)	-	4000	For complete thread parameters testing
4(Dimensions)	-	9000	For complete dimensional and qualitative tests.
6.2(Hardness)	-	700	For Hardness Test
9.1(Performance of thread testing)	-	4000	For complete thread parameters testing
7(Workmanship & Finish)	-	9000	For complete dimensional and qualitative tests.
5(Materials)	-	3500	For complete chemical tests (if required)
9.4(Measurement of gauging of threads)	-	4000	For complete gauging parameters test
9.3(Measurement of length of external thread)	-	4000	For complete gauging parameters test
9.2(Cutting of threads on a pipe testing)	-	4000	For complete gauging parameters test
6.3(To check the functioning of ratchet handle by rotating the locking pin 180°.)	-	9000	For complete dimensional and qualitative tests.
6.1(Manufacturing Quality (Visual))	-	9000	For complete dimensional and qualitative tests.
4(Dimensions)	-	-	-
6.2(Hardness)	-	-	-
9.1(Performance of thread testing)	-	-	-
7(Workmanship & Finish)	-	-	-
5(Materials)	-	-	-
9.4(Measurement of gauging of threads)	-	-	-
9.3(Measurement of length of external thread)	-	-	-
9.2(Cutting of threads on a pipe testing)	-	-	-
6.3(To check the functioning of ratchet handle by rotating the locking pin 180°.)	-	-	-
6.1(Manufacturing Quality (Visual))	-	-	-

-
Included w.e.f. 21-09-2022.

336

IS 319 (2007)

Free cutting brass bars, rods and section - Specification (Fifth Revision)

Annealed (Soft)(O),Half Hard(HB) and Hard (HD),GR 1,GR2

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.0(Dimension and Tolerances)	-	2500	For complete dimension and qualitative tests.
9.1 Table-2(Tensile Strength)	-	2500	-
9.2(Vickers Hardness)	-	2500	-
8.1 Table 1(Cu)	-	3000	For complete chemical tests
8.1 Table 1(Pb)	-	3000	For complete chemical tests
8.1 Table 1(Fe)	-	3000	-
8.1 Table 1(Total other impurities excluding iron)	-	3000	For complete chemical tests
8.1 Table 1(Zn)	-	3000	For complete chemical tests
10.1(Mercurous Nitrate Test)	-	3000	For complete chemical tests
5.0(Freedom from defects)	-	2500	For complete dimension and qualitative tests.

-
Included w.e.f. 21-09-2022.

Bureau of Indian Standards

The National Standards Body of India

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

PLOT NO. 27, STREET NO. 2, ADJOINING FOCAL POINT ROAD, TRANSPORT NAGAR, JALANDHAR, PUNJAB, JALANDHAR, Jalandhar, Punjab, 144004

9988862929 jbstestingsolutions@gmail.com

Scope List