BIS - LIMS (Laboratory Information Management System)

BIS, Northern Regional Laboratory (NRL)

B-69, Industrial Focal Point, Phase VII, Mohali, Mohali, S.A.S Nagar, Punjab, 160059

- nrol@bis.gov.in

Scope List

Reset

304 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 13428 (2024)

PACKAGED NATURAL MINERAL WATER - SPECIFICATION Third Revision

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1.1 (Escherichia coli)	-
6.1.2 (Coliform)	-
6.1.3 (Faecal Streptococci)	-
Cl-6.1.3 (Staphylococcus aureus)	-
6.1.4 (Sulphite Reducing Anaerobe)	-
6.1.5 (Pseudomonas aeruginosa)	-
6.1.6 (Yeast and moould)	-
6.1.7 (Salmonella)	-
Cl-6.1.7 (Shigella)	-
6.1.8 (Vibrio Cholera)	-
Cl-6.1.8 (V. parahaemolyticus)	-
6.2/Table 1/i (Colour)	-
6.2/Table 1/ii (Odour)	-
6.2/Table 1/iii (Taste)	-
6.2/Table 1/iv (Turbidity)	-
6.2/Table 1/v (Total Dissoved)	-
6.2/Table 1/vi (pH Value)	-
6.2/Table 2/i (Nitrate)	-
6.2/Table 2/ii (Nitrite)	-
6.2/Table 2/iii (Sulphide)	-
6.2/Table 2/iv (Manganese)	-
6.2/Table 2/v (Copper)	-
6.2/Table 2/vi (Fluoride)	-
6.2/Table 2/vii (Barium)	-
6.2/Table 2/viii (Antimony)	-
6.2/Table 2/ix (Borate)	-
6.2/Table 2/x (Silver)	-
6.2/Table 2/xi (Chloride)	-
6.2/Table 2/xii (Sulphate)	-
6.2/Table 2/xiii (Magnesium)	-
6.2/Table 2/xiv (Calcium)	-
6.2/Table 2/xv (Sodium)	-
6.2/Table 2/xvi (Alkalinity)	-
6.2/Table 2/xvii (Selenium)	-
6.2/Table 2/xviii (Mineral Oil)	-
6.2/Table 2/xix (Phenolic Compounds)	-
6.2/Table 2/xx (Anionic Surface active agents)	-
6.2/Table 3/i (Arsenic)	-
6.2/Table 3/ii (Cadmium)	-
6.2/Table 3/iii (Cyanide)	-
6.2/Table 3/iv (Chromium)	-
6.2/Table 3/v (Mercury)	-
6.2/Table 3/vi (Lead)	-
6.2/Table 3/vii (Nickel)	-
6.2/Table 3/viii (Polychlorinated biphenyle (PCB))	-
6.2/Table 3/ix (Polynuclear aromatic hydrocarbons)	-
6.2/Table 3/x (Uranium)	-

Partial

MICROBIOLOGICAL COMPLETE, Chemical Cyanide and RARs not available

IS 14543 (2024)

Packaged Drinking Water Other than Packaged Natural Mineral Water Specification Third Revision

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.3 (Appearance)	-
Cl-5.3, Table-1 (i) (Colour, true colour units, Max)	-
Cl-5.3, Table-1 (ii) (Odour)	-
Cl-5.3, Table-1 (iii) (Taste)	-
Cl-5.3, Table-1 (iv) (Turbidity, nephelometric turbidity unit (NTU), Max)	-
Cl-5.3, Table-1 (v) (Total dissolved solids, mg/l, Max)	-
Cl-5.3, Table-1 (vi) (pH)	-
Cl-5.3, Table-2 (i) (Barium (as Ba))	-
Cl-5.3, Table-2 (ii) (Copper (as Cu))	-
Cl-5.3, Table-2 (iii) (Iron (as Fe))	-
Cl-5.3, Table-2 (v) (Nitrate (as NO3 ))	-
Cl-5.3, Table-2 (vi) (Nitrite (as NO2 ))	-
Cl-5.3, Table-2 (vii) (Fluoride (as F))	-
Cl-5.3, Table-2 (viii) (Zinc (as Zn))	-
Cl-5.3, Table-2 (ix) (Silver (as Ag))	-
Cl-5.3, Table-2 (x) (Aluminium (as A1))	-
Cl-5.3, Table-2 (xi) (Chloride (as Cl))	-
Cl-5.3, Table-2 (xii) (Selenium (as Se))	-
Cl-5.3, Table-2 (xiii) (Sulphate (as SO4 ))	-
Cl-5.3, Table-2 (xiv) (Alkalinity (as HCO3 ))	-
Cl-5.3, Table-2 (xv) (Calcium (as Ca))	-
Cl-5.3, Table-2 (xvi) (Magnesium (as Mg))	-
Cl-5.3, Table-2 (xvii) (Sodium (as Na))	-
Cl-5.3, Table-2 (xviii) (Residual free chlorine)	-
Cl-5.3, Table-2 (xix) (Phenolic compounds (as C6H5OH))	-
Cl-5.3, Table-2 (xx) (Mineral oil)	-
Cl-5.3, Table-2 (xxi) (Anionic surface active agents)	-
Cl-5.3, Table-2 (xxii) (Sulphide)	-
Cl-5.3, Table-2 (xxiii) (Antimony (as Sb))	-
Cl-5.3, Table-2 (xxiv) (Borates (as B))	-
Cl-5.3, Table-2 (xxv) (Bromates (as BrO3 ))	-
Cl-5.3, Table-3 (i) (Mercury (as Hg))	-
Cl-5.3, Table-3 (ii) (Cadmium (as Cd))	-
Cl-5.3, Table-3 (iii) (Arsenic (as As))	-
Cl-5.3, Table-3 (iv) (Cyanide (as CN))	-
Cl-5.3, Table-3 (v) (Lead (as Pb))	-
Cl-5.3, Table-3 (vi) (Chromium (as Cr))	-
Cl-5.3, Table-3 (vii) (Nickel (as Ni))	-
Cl-5.3, Table-3 (viii) (Polychlorinated biphenyl (PCB))	-
Cl-5.3, Table-3 (ix) (Polynuclear aromatic hydrocarbons)	-
Cl-5.3, Table-3 (x) (Uranium)	-
5.4/Annex D/i (P,P-DDT)	-
5.4/Annex D/i (O,P-DDT)	-
5.4/Annex D/i (O,P-DDD)	-
5.4/Annex D/i (P,P-DDE)	-
5.4/Annex D/i (O,P-DDE)	-
5.4/Annex D/i (P,P-DDD)	-
5.4/Annex D/ii (Lindane)	-
5.4/Annex D/iii (a-HCH)	-
5.4/Annex D/iii (β- HCH)	-
5.4/Annex D/iii (d-HCH)	-
5.4/Annex D/iv (a-Endosulfan)	-
5.4/Annex D/iv (b-Endosulfan)	-
5.4/Annex D/iv (Endosulfan sulfate)	-
5.4/Annex D/v (Monochrotophos)	-
5.4/Annex D/vi (Ethion)	-
5.4/Annex D/vii (Chlorpyrifos)	-
5.4/Annex D/viii (Phorate)	-
5.4/Annex D/viii (Phorate sulphoxide)	-
5.4/Annex D/viii (Phorate sulfone)	-
5.4/Annex D/ix (2,4 –D)	-
5.4/Annex D/x (Butachlor)	-
5.4/Annex D/xi (Isoproturon)	-
5.4/Annex D/xii (Alachlor)	-
5.4/Annex D/xiii (Atrazine)	-
5.4/Annex D/xiv (Methyl parathion)	-
5.4/Annex D/xxvii (Methyl paraoxon)	-
5.4/Annex D/xv (Malathion)	-
5.4/Annex D/xxviii (Malaoxon)	-
5.4/Annex D/xvi (Aldrin)	-
5.4/Annex D/xvi (Dieldrin)	-
Cl-5.2.1 (Escherichia coli or thermotolerant bacteria)	-
Cl-5.2.2 (Coliform)	-
Cl-5.2.3 (Faecal streptococci)	-
Cl-5.2.3 (Staphylococcus aureus)	-
Cl-5.2.4 (Sulphite Reducing Anaerobes)	-
Cl-5.2.5 (Pseudomonas Aeruginosa)	-
Cl-5.2.7 (Yeast and mould)	-
Cl-5.2.8 (Salmonella)	-
Cl-5.2.8 (shigella)	-
Cl-5.2.9 (Vibrio cholera)	-
Cl-5.2.9 (V.parahaemolyticus)	-
Cl-5.2.6 (Aerobic Microbial Count @ 37 deg C)	-
5.2.6 (Aerobic Microbial Count @ 20 to 22 deg C)	-

Partial

Microbiological parameter is complete. Cyanide and RARs not available

IS 13688 (2020)

Packaged Pasteurized Milk — Specification ( Second Revision )

ALL TYPE

Rs 12,939.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Table 2 (i), IS 5887 (Part 3) (Salmonella, m)	-
Table 2 (ii), IS 14988 (Part 2) (Listeria monocytogenes, m)	-
Table 2 (iii), IS 5402 (Aerobic plate count, m)	-
Table 2 (iv),IS 5401 (Part 1) (Coliform count, m)	-

Partial

MICROBIOLOGICAL TESTING COMPLETE

IS 10484 (2021)

Paneer - Specification

ALL TYPE

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Table 2 Clause 5.6 (i) (Aerobic plate count-Doc No.FAD 15 (02815) (Requirement limit specified for m class based on 2- Class sampling plan))	-
Table 2 Clause 5.6 (ii) (Coliform count- IS 5401 (Part 1) (Requirement limit specified for m class based on 2- Class sampling plan))	-
Table 2 Clause 5.6 (iii) (Staphylococcuus aureus- ( coagulase positive) IS 5887 (Part 2) (Requirement limit specified for m class based on 2- Class sampling plan))	-
Table 2 Clause 5.6 (iv) (Yeast & mould- IS 5403 (Requirement limit specified for m class based on 2- Class sampling plan))	-
Table 2 Clause 5.6 (v) (Escherichia Coli- IS 5887 (Part 1) (Requirement limit specified for m class based on 2- Class sampling plan))	-
Table 2 Clause 5.6 (vi) (Salmonella sp.- IS 5887 (Part 3) (Requirement limit specified for m class based on 2- Class sampling plan))	-
Table 2 Clause 5.6 (vii) (Listeria monocytogenes- IS 14988 (Part 1) (Requirement limit specified for m class based on 2- Class sampling plan))	-

Partial

MICROBIOLOGICAL TESTING COMPLETE

IS 9617 (2023)

DAHI ï¿½ SPECIFICATION (First Revision of IS 9617)

ALL TYPE

Rs. 19,600.0 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.5 Table 3 (i) (Coliform count/IS 5401(P-1))	-
5.5 Table 3 (ii) (Staphylococcus aureus/IS 5887(P-8/Sec-1))	-
5.5 Table 3 (iii) (Yeast & mould count/IS 16069(P-1))	-
5.5 Table 3 (iv) (E.coli/IS 5887(P-1):1976)	-
5.5 Table 3 (v) (Salmonella sp./IS 5887(P-3/Sec-1))	-
5.5 Table 3 (iv) (Listeria monocytogenes/IS 14988(P-1))	-

Partial

MICROBIOLOGICAL TESTING COMPLETE

IS 4709 (2021)

Flavoured Milk - Specification

Pasteurized Flavoured Milk

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Table 2 (Clause 8.3)(i) (Salmonella sp.- IS 5887(P-3) (Requirement limit specified for m class based on 2- Class sampling plan))	-
Table 2 (Clause 8.3)(ii) (L.monocytogenes- IS 14988(P-1) (Requirement limit specified for m class based on 2- Class sampling plan))	-
Table 2 (Clause 8.3)(iii) (Aerobic plate count- IS 5402 (Requirement limit specified for m class based on 2- Class sampling plan))	-
Table 2 (Clause 8.3)(iv) (Coliform count- IS 5401(P-1) (Requirement limit specified for m class based on 2- Class sampling plan))	-

Partial

MICROBIOLOGICAL TESTING PARTAL

IS 14433 (2022)

INFANT MILK SUBSTITUTES - SPECIFICATION (Second Revision of IS 14433)

TYPE -1 AND TYPE -2

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 5.10,Table 3, Sl No i) (Aerobic plate count)	-
Clause 5.10,Table 3, ,Sl No iii) (Staphylococcus aureus)	-
Clause 5.10,Table 3, ,Sl No iv) (yeast and mould count)	-
Clause 5.10,Table 3, ,Sl No v) (Salmonella sp.)	-
Clause 5.10,Table 3, ,Sl No vi) (Listeria monocytogenes)	-
CL 5.10, Table 3 (vi) (Bacillus cereus)	-
Clause 5.10,Table 3, ,Sl No viii) (Sulphitr reducing clostridia)	-
Clause 5.10,Table 3, ,Sl No ix) (Enterobacteriaceae)	-
Clause 5.10,Table 3, ,Sl No x) (Enterobacter sakazakii ( Cronobacter sp.))	-

Partial

MICROBIOLOGICAL TESTING COMPLETE

IS 15757 (2022)

FOLLOW-UP FORMULA-COMPLEMENTARY FOODS - SPECIFICATION (First Revision of IS 15757)

All

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 4.8,Table 2 ,Sl No i) (Aerobic plate count)	-
Clause 4.8,Table 2 ,Sl No ii) (Coliform Count)	-
Clause 4.8,Table 2 ,Sl No iii) (Staphylococcus aureus( Coagulase positive))	-
Clause 4.8,Table 2 ,Sl No iv) (Yeast and mould count)	-
Clause 4.8,Table 2 ,Sl No v) (Salmonella sp.)	-
Clause 4.8,Table 2 ,Sl No vi) (Listeria moncytogenes)	-
Clause 4.8,Table 2 ,Sl No vii) (Bacillus cereus)	-
Clause 4.8,Table 2 ,Sl No viii) (Sulphite reducing clostridia)	-
Clause 4.8,Table 2 ,Sl No ix) (Escherichia coli)	-

Partial

Microbiological testing Complete

IS 2347 (2023)

DOMESTIC PRESSURE COOKER ï¿½ SPECIFICATION

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Gross capacity)	-
4.2 (Body Capacity)	-
6 (Construction)	-
7 (Workmanship and Finish )	-
8.1 (Air Pressure Test )	-
8.2 (Proof Pressure Test )	-
8.6.2 (Tests for Removal of Lid under Pressure For inner Lid Cooker)	-
8.3 (Operating Test for Pressure Regulating Device )	-
8.4 (Test for Safety Relief Device )	-
8.5 (Bursting Pressure Test )	-
8.6.1 (Tests for Removal of Lid under Pressure For Outer Lid Cooker)	-

Partial

IS 14650 (2023)

UNALLOYED AND ALLOYED STEEL INGOT AND SEMI-FINISHED PRODUCTS FOR RE-ROLLING PURPOSES - SPECIFICATION (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause - 7.1 (CARBON)	-

Partial

except Microalloying Elements and optional tests

IS 9537 : Part 8 (2003)

Conduits for electrical installations - Specification: Part 8 rigid non - Threadable conduits of aluminium alloy

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause No. 7 (Testing Dimensions)	-
Clause No. 7 (Testing Dimensions)	-
Clause No. 8 (construction)	-
clause No. 9.3 (Compression Test)	-

Partial

Complete facility available

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5.1 (Classification by appearance)	-

Partial

All tests

IS 9873 : Part 3 (2020)

Safety of Toys Part 3 Migration of Certain Elements ( Third Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4.1 & 4.2,Table 1,sl.no-i (Sb)	-
Cl-4.1 & 4.2,Table 1,sl.no-ii (As)	-
Cl-4.1 & 4.2,Table 1,sl.no-iii (Ba)	-
Cl-4.1 & 4.2,Table 1,sl.no-iv (Cd)	-
Cl-4.1 & 4.2,Table 1,sl.no-v (Cr)	-
Cl-4.1 & 4.2,Table 1,sl.no-vi (Pb)	-
Cl-4.1 & 4.2,Table 1,sl.no-vii (Hg)	-
Cl-4.1 & 4.2,Table 1,sl.no-viii (Se)	-

Partial

Complete.

IS 14616 (1999)

Laminated veneer lumber specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Dimensions)	-
6.2 (Dimensions)	-

Complete

Test facility is complete

IS 2202 : Part 1 (2023)

WOODEN FLUSH DOOR SHUTTERS SOLID CORE TYPE SPECIFICATION PART 1 PLYWOOD FACE PANELS Seventh Revision

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
9.1 (Workmanship & Finish)	-
9.2 (Workmanship & Finish)	-
9.3 (Workmanship & Finish)	-
11.1 (Dimensions - Height)	-
11.1 (Dimensions - Width)	-
11.1 (Dimensions - Thickness)	-
11.1 (Dimensions - Variation in thickness)	-
11.1 (Dimensions - Squareness)	-
4 (GRADE)	-
4 (TYPE)	-
5 (SIZES)	-
Clause 6.2.1 (Plywood)	-
Clause 6.2.2 (Decorative plywood)	-
11.2 (General Flatness Test)	-
11.2 (General Flatness Test)	-
11.2 (General Flatness Test)	-
11.3 (Local Planeness Test)	-
11.4 (Impact Indentation Test)	-
11.4 (Impact Indentation Test)	-
11.5 (Flexure Test)	-
11.5 (Flexure Test)	-
11.6 (Edge Loading Test)	-
11.6 (Edge Loading Test)	-
11.6 (Edge Loading Test)	-
11.7.1 (Shock Resistance Test)	-
11.7.2 (Shock Resistance Test)	-
11.8 (Buckling Test)	-
11.8 (Buckling Test)	-
11.8 (Buckling Test)	-
11.9.2 (Slamming Test)	-
11.9.3 (Slamming Test)	-
11.10 (Misuse Test)	-
11.11 (Varying Humidity Test)	-
11.11 (Varying Humidity Test)	-
11.12 (End Immersion Test)	-
11.13 (Knife Test)	-
11.14 (Glue Adhesion Test)	-
11.15 (Screw Withdrawal Resistance Test)	-
11.15 (Screw Withdrawal Resistance Test)	-

Complete

Test facility is complete

IS 398 : Part 6 (2021)

Aluminium Conductors For Overhead Transmission Purposes Part 6: High conductivity aluminium alloy stranded conductors

Aluminium Conductor

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
16.2 (Visual Examination)	-
16.3, Table 4 (Measurement of Lay Ratio / Direction of Lay)	-
16.3, Table 4 (Measurement of Lay Ratio / Direction of Lay)	-
16.3, Table 4 (Measurement of Lay Ratio / Direction of Lay)	-
16.3, Table 4 (Measurement of Lay Ratio / Direction of Lay)	-
16.4, Table 2 (Measurement of Diameter of Individual Aluminium Alloy Wires)	-
16.5, Table 2 (Breaking Load Test - before stranding)	-
16.5, Table 2 (Breaking Load Test - after stranding)	-
16.6, Table 1 (Elongation Test - before stranding)	-
16.6, Table 1 (Elongation Test - after stranding)	-
16.7, Table 2 (Resistivity Test)	-
16.8 (Wrapping Test)	-
11 (Stranding)	-
8 (Freedom from defects)	-

Partial

Excluding Except CI. 16.9 Ultimate tensile test, Cl. 16.10 DC resistance test and CI.16.11 Stress Strain Test

IS 13095 (2020)

Butterfly Valves for General Purposes ( First Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.0 (VALVE END CONNECTIONS)	-
5.0 (SERVICE APPLICATIONS)	-
6.0 ( NOMINAL SIZES )	-
7.0 (NOMINAL PRESSURES)	-
7.2 (Class designations)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Flange-D)	-
9.1.1 ( Double Flanged Body Ends)	-
9.2.2 (Wafer Body Ends)	-
10.1 -Table1 (FACE TO FACE DIMENSIONS)	-
13.0 (SEATING AND LININGS)	-
14.0 (BEARINGS)	-
14.2 (BEARINGS)	-
14.3 (BEARINGS)	-
16.0 (OPERATION)	-
17.1 (Performance Testing)	-
17.2 (Body Test)	-
17.3 (Seat Test)	-
17.4 (Disc Strength Test)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges-IS 6418 (Table 2/3/6/7/10)- Flange-b)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges-IS 6418 (Table 2/3/6/7/10)- Rasied Face-d4)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges-IS 6418 (Table 2/3/6/7/10)- Rasied Face-f)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Bolting )	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Drilling -Nos. )	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Drilling -d2)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Drilling -k)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Neck -d3)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Neck- r)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Flange-D)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Flange-b)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Rasied Face-d4)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Rasied Face-f)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Bolting)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Drilling -Nos. )	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Drilling -d2 )	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Drilling -k)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Neck -d3)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Neck-r)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Pipe O.D.- d1)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Flange - D)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Flange - b)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Raised Face - d4)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Raised Face - f)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Bolting)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Drilling - Nos.)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Drilling -d2)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Drilling -k)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Flange -D)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Flange - b)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Raised Face - d4)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Raised Face - f)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Bolting)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Drilling - Nos.)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Drilling -d2)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Drilling -k)	-

Partial

Chemical tests not available

IS 1658 (2006)

Fibre hardboards - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7 Table-1 (Dimensions and tolerances in accordance with Annex A&B)	-
6 (Workability and finish)	-

Complete

Test facility is complete

IS 3099 : Part 1 AND 2 (1992)

Microscopes - Slips and slidesspecification: Part 1 microscope slips: Part 2 microscope slides (First Revision)

Rs1800.00/, Rs.1200.00/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 3 (Dimensions Thickness)	-

Partial

Excluding Optical Properties

IS 4123 (1982)

Specification for chain pipe wrenches (First Revision)

Rs 2700.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 Table 1 (Dimensions- Nominal Size)	-
3 Table 1 (Dimensions- Capacity, D min)	-

Partial

Mechanical: Test facility is complete, Chemical: Material testing for carbon steel available only

IS 11279 (1985)

Specification for braille slate

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2 (Shape -and Dimensions Fig1,2,3)	-

Partial

Mechanical: Test facility is complete, Chemical: Finish -Anodic coating as per IS 1868 not available

IS 1117 (2018)

Laboratory glassware - Single - Volume pipettes (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1.1&3 (Marking)	-
3 (Class of Accuracy)	-
4.1 (Nominal capacities)	-
5.1 (Material)	-
5.1 (Material)	-
5.3 (Workmanship & Finish)	-
5.4 (i) Distance of graduation line from top of pipette.)	-
5.4 (ii) Distance from graduation line to top of bulb(pattern 2))	-
5.4 (iii)Distance from graduation line to tip of jet (Pattern 1))	-
5.4 (iv) Wall thickness)	-
5.4 (a) pattern 2 pipette of 1 and 2ml )	-
5.4 (b) Other pipettes)	-
5.4 (v) Dia. of safety bulb (if provided ))	-
5.4 (vi)Distance from top of pipette to bottom of safety bulb )	-
5.4 (vii) Overall length, L)	-
5.4 (viii) Length of suction tube, L1 )	-
5.4 (ix) Length of delivery tube, L2 )	-
5.4 (x) Internal dia. of suction tube D1 )	-
5.4 (xi) External dia. of bulb D2 )	-
5.4 (xii) External dia. of delivery tube D3 )	-
5.5 (Delivery Time)	-
5.6&7 (Graduation line & Visibility )	-

Partial

Excluding Accuracy test

IS 1381 : Part 2 (2019)

Laboratory glassware - Boiling flasks: Part 2 boiling flasks with conical ground joints (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (Type)	-
4 (Series of capacities)	-
6 (Dimensions)	-
6 (Dimensions)	-
6 (Dimensions)	-
6 (Dimensions)	-
7 (Ground glass joints)	-
9 (Marking)	-
9 (Marking)	-
9 (Marking)	-
9 (Marking)	-
5 (Material)	-

Partial

Excluding Thermal shock endurance, Material tests

IS 1381 : Part 1 (2003)

Laboratory glassware - Narrow - Necked boiling flasks (Second Revision)

Rs.3000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3, 4 (Type of Flask)	-
3.1, 4.1 (Series of Nominal Capacity)	-
3.2, 4.2 (Nominal Capacity )	-
3.4, 3.4.1 & 4.4, 4.4.1 (Construction- a) Stability )	-
3.4, 3.4.2 & 4.4, 4.4.2 (Construction- b) Neck )	-
3.5, 4.5 (Dimensions (in mm) (Table 1&2))	-
3.5.2 (Neck Length)	-
3.5.3, 4.5.2 (Dimensions of base )	-
3.5.4, 4.5.3 (Wall thickness)	-
5 (Marking )	-

Partial

Excluding cl 3.5.3 dimension of base for conical flask of 5000 ml, material test

IS 723 (1972)

Specification for steel countersunk head wire nails (First Revision)

- View breakup
Testing Charges for Mechanical testing for the product: Rs. 1950/- Testing charges for Chemical parameters in Table 1 is Rs. 3600/- Additional charge for testing of element apart from Table 1 of IS 7887 (Al, Si etc.) will be Rs. 1000/- extra for each element.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2 (Carbon- IS 228(Part 1))	-
2 (Sulphur- IS 228(Part 9))	-
2 (Phosphorous- IS 228(Part 3))	-
2 (Manganese- IS 228(Part 2))	-
2 (Silicon- IS 228(Part 2))	-

Partial

Test facility is not available in NRL

IS 458 (2021)

Precast Concrete Pipes (with and without Reinforcement) -

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.5.1.1 ((vi) Compressive strength,)	-

Partial

Product certification scheme is being operated on FT basis. Excluding three edge load and HST, Split tesnsile and compressive strength upto 1000KN load-

IS 4159 (2021)

Mineral Filled Sheathed Heating Elements

Mineral filled sheathed heating element

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
"Cl. 6 IS 4159:2021" (Classification)	-
"Cl. 8 IS 4159:2021" (Protection against access to live parts)	-
"Cl. 10 IS 4159:2021" (Power Input and Current)	-
"Cl. 11 IS 4159:2021" (Heating)	-
"Cl. 13 IS 4159:2021" (Leakage Current & Electrical Strength at Operating Temperature)	-
"Cl. 15 IS 4159:2021" (Moisture Resistance)	-
"Cl. 16 IS 4159:2021" (Leakage Current and Electric strength)	-
"Cl. 18 IS 4159:2021" (Endurance)	-
"Cl. 19 IS 4159:2021" (Abnormal Operation)	-
"Cl. 20 IS 4159:2021" (Stability and mechanical Hazards)	-
"Cl. 21 IS 4159:2021" (Mechanical Strength)	-
"Cl. 22 IS 4159:2021" (Construction)	-
"Cl. 23 IS 4159:2021" (Internal Wiring)	-
"Cl. 24 IS 4159:2021" (Components)	-
"Cl. 25 IS 4159:2021" (Supply Connections and External Flexible Cables and Cords)	-
"Cl. 26 IS 4159:2021" (Terminal For External Conductors)	-
"Cl. 27 IS 4159:2021" (Provision For Earthing)	-
"Cl. 28 IS 4159:2021" (Screws and Connections)	-
"Cl. 29 IS 4159:2021" (Creepage Distances, Clearances And Distances Through Insulation)	-
"Cl. 30 IS 4159:2021" (Resistance To Heat, Fire And Tracking)	-
"Cl. 31 IS 4159:2021" (Resistance To Rusting)	-
"Cl. 102 IS 4159:2021" (Leakage and hydrostatic strength (for oil heating elements))	-

Partial

Excluding water heating element rating above 3 kW and Except oil heaters

IS/ISO 3183 (2012)

Petroleum and Natural Gas Industries â€” Steel Pipe for Pipeline Transportation Systems ( First Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Partial

Excluding HST, Impact test, Microalloying Elements

IS 2046 (1995)

Decorative thermosetting synthetic resinbonded laminated sheets specification (Second Revision)

Rs. 2550.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 , Table 1 (CLASSIFICATION)	-
5.4.6 (Length and width of a full size Laminate)	-
5.4.7,Fig. 2 (Staightness of Edges)	-
5.4.8, Fig.3 (Squareness of the Laminates)	-
7.2 a) (Marking)	-

Partial

Test facility is not available in NRL

IS 12615 (2018)

Line operated three phase AC motors (IE Code) "Efficiency classes and performance specification" (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
15.2 (Rating)	-
18.3 (BIS Certification Marking )	-
8.0 (Earthing)	-
9.0 (Terminal Marking)	-
11.0 (DUTY AND RATING)	-
18.3 (Marking)	-
16.2.1 (Dimensions)	-
16.1.1 (Insulation Resistance Test)	-
16.1.2 (Measurement of Resistance of Windings of Stator)	-
16.1.3 (No Load Test)	-
16.1.4 (Locked Rotor Readings of Voltage, Current and Power Input at a Suitable Reduced Voltage)	-
16.1.5 (5 Reduced Voltage Running up Test at no-load (for squirrel cage motor up to 37 kW only))	-
16.1.6 (High Voltage Test)	-
16.2.2 (Locked Rotor Test)	-
16.2.2.3 (Determination of starting characteristics -locked rotor current)	-
16.2.2.3.1 (Direct proportion method)	-
16.2.3 (Full Load Test to Determine Efficiency, Power Factor and Slip)	-
16.2.4 (Temperature Rise Test)	-
16.2.5 (Momentary Overload Test)	-

Partial

Excluding For rating above 1 kW and optional test for all rating

1
2
3
Next
Last

Bureau of Indian Standards

The National Standards Body of India

BIS, Northern Regional Laboratory (NRL)

B-69, Industrial Focal Point, Phase VII, Mohali, Mohali, S.A.S Nagar, Punjab, 160059

- nrol@bis.gov.in

Scope List

No Record Found