BIS - LIMS (Laboratory Information Management System)

BIS, Northern Regional Laboratory (NRL)

B-69, Industrial Focal Point, Phase VII, Mohali, Mohali, S.A.S Nagar, Punjab, 160059

- nrol@bis.gov.in

Scope List

Reset

299 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 2404 (1993)

Malt extract - Specification (Second Revision)

6600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

-
Microbiological testing complete Excluding Refractive Index, Reducing Sugar

IS 2385 (1977)

Specification for hot - Rolled mild steel sheet and strip in coil form for cold - Reduced tinplate and cold - Reduced blackplate (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 5.1, 5.2 (carbon)	-
Cl. 5.1, 5.2 (Manganese)	-
Cl. 5.1, 5.2 (Sulphur)	-
Cl. 5.1, 5.2 (Phosphorus)	-
Cl. 5.1, 5.2 (Nitrogen )	-
Cl. 5.1, 5.2 (aluminium)	-
Cl. 5.1, 5.2 (copper)	-
Cl. 5.1, 5.2 (silicon)	-
Cl. 5.1, 5.2 (chromium)	-

-
Excluding Al, Cu, Cr

IS 9294 (1979)

Cold-Rolled Stainless Steel Strips for Razor Blades

1725/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Carbon- appropriate parts of IS 228)	-
4.1 (Manganese- appropriate parts of IS 228)	-
4.1 (Silicon- appropriate parts of IS 228)	-
4.1 (Sulphur- appropriate parts of IS 228)	-
4.1 (Phosphorous- appropriate parts of IS 228)	-
4.1 (Chromium- appropriate parts of IS 228)	-
4.3 (Nickel- appropriate parts of IS 228)	-
4.3 (Molybdenum- appropriate parts of IS 228)	-
4.3 (Copper- appropriate parts of IS 229)	-

-
Excluding Microstructure, Hardness test, surface finish, Microalloying elements

IS 8951 (2001)

Steel cast billet ignots, billets and blooms for production of high carbon steel wire rods - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4,7.1 & 7.2 Table 1 (Carbon- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Manganese- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Silicon- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Sulphur- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Phosphorous- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Copper- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Nickel- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Chromium- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Nitrogen- IS 228 or any other established instrumental /Chemical method)	-

-
Excluding Cu, Ni, Cr

IS 8917 (1978)

Specification for steel plates for galvanizing pots

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 5.1 (Silicon, Max.)	-
Clause 5.1 (Phosphorous, Max.)	-
Clause 5.1 (Sulphur)	-
Clause 5.1 (Manganese)	-
Clause 5.1 (Carbon)	-

-
Excluding Silicon

IS 8748 (1978)

Specification for forged/rolled CTC segments

Rs.1050/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 3.1, Table 1 (Chromium)	-
Clause 3.1, Table 1 (Nickel )	-
Clause 3.1, Table 1 (Phosphorous)	-
Clause 3.1, Table 1 (Sulphur, Max)	-
Clause 3.1, Table 1 (Manganese)	-
Clause 3.1, Table 1 (Silicon, Max)	-
Clause 3.1, Table 1 (Carbon)	-

-
Excluding Ni, Cr

IS 8566 (1977)

Specification for steel wire for reeds

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 4.1 (Phosphorous, Max.)	-
Clause 4.1 (Sulphur)	-
Clause 4.1 (Carbon)	-

-
Test facility is complete

IS 8565 (1977)

Specification for heald wire

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 4.1 (Phosphorous, Max.)	-
Clause 4.1 (Sulphur)	-
Clause 4.1 (Manganese)	-
Clause 4.1 (Silicon)	-
Clause 4.1 (Carbon)	-

-
Test facility is complete

IS 8564 (1977)

Specification for steel wire for nipples for spokes

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 5.1 (Tellurium )	-
Clause 5.1 (Lead)	-
Clause 5.1 (Phosphorous, Max.)	-
Clause 5.1 (Sulphur)	-
Clause 5.1 (Manganese)	-
Clause 5.1 (Silicon, Max.)	-
Clause 5.1 (Carbon)	-

-
Excluding Pb, Te

IS 8563 (1977)

Specification for half round mild steel wlRe for the manufacture of split pins

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 5.1 (Phosphorous, Max.)	-
Clause 5.1 (Sulphur, Max.)	-
Clause 5.1 (Manganese)	-
Clause 5.1 (Carbon, Max.)	-

-
Test facility is complete

IS 4430 (1979)

Specification for mould steels (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 6 (Carbon)	-
Cl. 6 (Silicon)	-
Cl. 6 (Manganese)	-
Cl. 6 (Nickel)	-
Cl. 6 (Chromium)	-
Cl. 6 (Molybdenum)	-
Cl. 6 (Vanadium)	-
Cl. 6 (Tungsten)	-
Cl. 6 (Sulphur)	-
Cl. 6 (Phosphorus)	-
Cl. 6 (Copper)	-
Cl. 6 (Cobalt)	-

-
Excluding Cr, Ni, Mo, Cu and V

IS 4431 (1978)

Specification for carbon and carbon manganese free cutting steels (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 6 (Carbon)	-
Cl. 6 (Silicon)	-
Cl. 6 (Manganese)	-
Cl. 6 (Sulphur)	-
Cl. 6 (Phosphorus)	-
Cl. 6 (Chromium)	-
Cl. 6 (Molybdenum)	-
Cl. 6 (Nickel)	-
Cl. 6 (Copper)	-
Cl. 6 (Vanadium)	-

-
Excluding Cr, Ni, Mo, Cu and V

IS 4687 (1995)

Gaskets and packings - Gland packings asbestos - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 3.1.1.1 (Loss on Ignition)	-
Cl. 3.1.1.1 (loss on drying)	-

-
Test facility is complete

IS 4882 (1979)

Specification for low carbon steel wire for rivets for use in bearing industry (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1,4.1.1,5.1 (Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
4.1,4.1.1,5.1 (Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
4.1,4.1.1,5.1 (Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
4.1,4.1.1,5.1 (Sulphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
4.1,4.1.1,5.1 (Phosphorus- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
4.1,4.1.1,5.1 (Nitrogen- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-

-
Excluding Grain Size, Al

IS 9476 (1980)

Specification for cold-rolled steel strips for carbon steel razor blades

525 for Physical + carbide density test View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Carbon- IS 228)	-
4.1 (Manganese- IS 228)	-
4.1 (Silicon- IS 228)	-
4.1 (Sulphur- IS 228)	-
4.1 (Phosphorous- IS 228)	-
4.1 (Chromium- IS 228)	-
4.1 (Sulphur+Phosphorous- IS 228)	-
3.1 (Nitrogen- IS 228)	-

-
Excluding Cr

IS 9442 (1980)

Specification for hot-rolled steel plates, sheets and strips for manufacture of agricultural tillage discs

Rs 1425/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 5.1 (Carbon)	-
Clause 5.1 (Sulphur)	-
Clause 5.1 (Phosphorous)	-
Clause 5.1 (Manganese)	-
Clause 5.1 (Silicon)	-

-
Excluding Grain Size, Decaruburization

IS 9485 (1980)

Specification for cold - Reduced and hot - Rolled carbon steel sheet for porcelain enamelling

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 1.1, 5.1-5.2 (Carbon)	-
Cl. 1.1, 5.1-5.2 (Manganese)	-
Cl. 1.1, 5.1-5.2 (Sulphur)	-
Cl. 1.1, 5.1-5.2 (Phosphorus)	-
Cl. 1.1, 5.1-5.2 (Sulphur + Phosphorus)	-
Cl. 1.1, 5.1-5.2 (Titanium)	-
Cl. 1.1, 5.1-5.2 (columbium/Niobium)	-
Cl. 1.1, 5.1-5.2 (Nitrogen)	-

-
Excluding Cupping test, Microalloying Elements

IS 9516 (1980)

Specification for heat resisting steels

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1,5.2,5.3 Table 4 (Carbon-Relevant parts of IS 228)	-
5.1,5.2,5.3 Table 4 (Silicon-Relevant parts of IS 228)	-
5.1,5.2,5.3 Table 4 (Manganese-Relevant parts of IS 228)	-
5.1,5.2,5.3 Table 4 (Nickel-Relevant parts of IS 228)	-
5.1,5.2,5.3 Table 4 (Chromium-Relevant parts of IS 228)	-
5.1,5.2,5.3 Table 4 (Nitrogen-Relevant parts of IS 228)	-
5.1,5.2,5.3 Table 4 (Sulphur-Relevant parts of IS 228)	-
5.1,5.2,5.3 Table 4 (Phosphorous-Relevant parts of IS 228)	-

-
Excluding Ni,Cu, Mo,V

IS 963 (1958)

Specification for chrome molybdenum steel bars and rods for aircraft purposes

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1 (Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1 (Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1 (Suphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1 (Phosphorous- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1 (Chromium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1 (Molybdenum- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1 (Nickel- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-

-
Excluding Cr, Mo,Ni

IS 9962 (1981)

Specification for steel wire for needles

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
5.1 (Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
5.1 (Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
5.1 (Sulphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
5.1 (Phosphorus- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-

-
Excluding Coating Test (Clause 10) Additional remark - 'uncoated' sample is required for chemical testing. Decarburization

IS 5489 (1975)

Specification for carburizing steels for use in bearing industry (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1,4.1.1 & 4.2 Table 1 (Carbon- Relevant parts of IS 228 )	-
4.1,4.1.1 & 4.2 Table 1 (Sulphur- Relevant parts of IS 228 )	-
4.1,4.1.1 & 4.2 Table 1 (Manganese- Relevant parts of IS 228 )	-
4.1,4.1.1 & 4.2 Table 1 (Phosphorous- Relevant parts of IS 228 )	-
4.1,4.1.1 & 4.2 Table 1 (Silicon- Relevant parts of IS 228 )	-

-
Excluding Cr, Ni, Mo, Cu, V

IS 3450 (1994)

Carbon papers - Handwriting - Specification (Second Revision)

3172.00 View breakup
Rs. 3172/- (only for description, substance & coating and keeping quality).

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (Description)	-
5.2 (Base Paper)	-
5.3 (Size)	-
5.4 (Carbon work)	-
5.3 (Resistance to curling)	-
Table- 1(i) (Substance of the)	-
Table- 1(ii) (Coating)	-
Table- 1(iii) (Durability)	-
Table- 1(iv) (Manifolding)	-
6 (Keeping quality)	-
Cl. 5.6 Table no 4 (Manifolding)	-
Cl. 5.6 Table no 3 (Durability)	-
Cl. 5.6 Table no 2 (Coating )	-
Cl. 5.6 Table no 1 (Substance of base paper)	-
Cl. 5.5 (Resistance.of Curling )	-
Cl. 5.4 (Carbon Work)	-
5.2 (Base Paper)	-

-
Excluding Durability and manifolding

IS 1997 (2008)

Laboratory glassware - Burettes (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
11 (Markings )	-
5.1 (Class of Accuracy)	-
5.2 (Types)	-
8 (Construction)	-
Table 2 (i) Scale length )	-
Table 3 ( ii) Overall length )	-
Table 4 (iii) Distance of Zero line from top of burette )	-
Table 5 (iv) Distance of lowest graduation line from the top of stopcock )	-
Table 6 (v) Length of tube of uniform bore below graduation line )	-
Table 7 (vi) Distance of end of jet from underside of stopcock )	-
8.2 ( c) Top of burette )	-
8.3 (d) Stopcock and similar devices)	-
8.4 (e) Stop Cock Leakage)	-
8.5 ( f) Delivery jet)	-
8.6 (g) Delivery time )	-
8.6 (g) Delivery time )	-
9 (Graduations, figuring and patterns )	-
9.1 (a) Graduations patterns )	-
9.2 (Position of graduation line)	-
9.3 (c) Marking of graduation lines )	-
12 (. Visibility of graduation line)	-

-
Excluding Material and Accuracy test not available,

IS 1065 : Part 1 (2019)

Stable bleaching powder - Specification: Part 1 household and industrial use (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.2 (Description)	-
5.2.1 (Description)	-
5.3 Table-1 i (Available chlorine)	-
5.3 Table-1 ii (Stability, loss of Chlorine on the basis of initial available chlorine )	-
5.3 Table-1 iiii (Moisture, percent by mass. )	-
5.3 - Table 1 - Sl No - iv (Particle Size (passing through 1.70 mm IS Sieve) - Annex D)	-
Clause 5.4 (Keeping Quality )	-
Clause 5.3 Table 1 (Available Chlorine)	-

-
Test facility is complete

IS 9873 : Part 2 (2017)

Safety of toys: Part 2 flammability (Third Revision)

Rs.2144/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2.3-5.3 (Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy-Duration of the flame after the removal of the test flame)	-
4.2.3-5.3 (Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy- maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-
4.2.4-5.3 (Toys to be worn on the head-Full or partial moulded head masks-Duration of the flame after the removal of the test flame)	-
4.2.4-5.3 (Toys to be worn on the head-Full or partial moulded head masks-maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-

-
Test facility is complete

IS 9873 : Part 4 (2017)

Safety of toys: Part 4 swings, slides and similar activity toys for indoor and outdoor family domestic use

Rs.5475/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.5.2 (Stability of activity toys with a free height of fall of 600 mm or less)	-
4.7.1.1 and A.4.7. (Stability of swings and other activity toys with crossbeams)	-
4.4.1 (Head and neck entrapment)	-
4.7.3.2 (Toddler swings without a crossbeam)	-
4.7.4 (Impact from swing elements - swing elements shall not impart an average peak value of acceleration)	-
4.7.4 (Impact from swing elements - Average surface compression)	-

-
Test facility is complete

IS 9873 : Part 1 (2019)

Safety of toys: Part 1 safety aspects related to mechanical and physical properties (Fourth Revision)

16,189 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.35.3 - 5.39 (Jaw entrapment in handles and steering wheels-jaw entrapment test)	-
4.24(b) - 5.18 (Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand-(Parts made of metals))	-
4.24(b) - 5.18 (Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand(Parts made of Plastic or wood ))	-
4.24(b) - 5.18 (Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand(Parts made of glass or porcelain))	-
4.24(c) - 5.18 (Toys containing a heat source- rise in temperature of other accessible parts of the toy(Parts made of metals))	-
4.24(c) - 5.18 (Toys containing a heat source- rise in temperature of other accessible parts of the toy( Parts made of other materials))	-
4.18.4.3 - 5.15.1.3.3 (Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)-kinetic energy per area)	-
4.18.3(b) - 5.15.1.3.3 (Projectile toys-Projectile toys with stored energy-determination of kinetic energy per area of contact)	-
4.31.2(a) - 5.32 (Magnets and magnetic components-All other toys with magnets and magnetic components-magnetic flux index)	-
4.31.2(a) - 5.32 (Magnets and magnetic components-All other toys with magnets and magnetic components-small parts test)	-
4.4.1 - 5.2 (Small parts-For children under 36 months)	-
4.4.2 - 5.2 (Small parts-For children 36 months and over but under 72 months )	-
4.5.1.2 - 5.3 (Shape, size and strength of certain toys-Squeeze toys, rattles, and certain other toys and components of toys-Test for shape and size of certain toys)	-
4.5.1.4 - 5.3 (Shape, size and strength of certain toys-Toy fasteners (e.g. nails, bolts, screws, and pegs) with nearly spherical, hemispherical, or dome-shaped ends intended for children 18 months and over but under 48 months-Test for shape and size of certain toys)	-
4.5.4 - 5.6 (Shape, size and strength of certain toys- Pre-school play figures-Test for pre-school play figures)	-
4.5.2 - 5.4 (Shape, size and strength of certain toys-Small balls-Small balls test)	-
4.5.3 - 5.5 (Shape, size and strength of certain toys-Pompoms-Test for pompoms)	-
4.11.4(a) - 5.11.4.2 (Cords-Fixed loops and nooses intended for children under 36 months-Test for fixed loops and nooses-Elastic materials)	-
4.31.2(c ) - 5.31 - 5.24.2 - 5.24.3 - 5.24.5 - 5.24.6.1 - 5.24.6.2 - 5.33 - 5.31 - 5.32 (Magnets and magnetic components-All other toys with magnets and magnetic components-magnetic flux index After Following tests: -tension test for magnets; -drop test/tip over test for large and bulky toys; -torque test; -tension test, general procedure; -tension test for seams in soft-filled (stuffed) toys, beanbag-type toys and other similar filled toys, if applicable; -impact test for magnets; -compression test; -tension test for magnets;)	-
9873 (Part - 3) 4.1 - Table 1 (Selenium (Se) - Cl 7,8,9 )	-
9873 (Part - 3) 4.1 - Table 1 (Mercury (Hg) - Cl 7,8,9 )	-
9873 (Part - 3) 4.1 - Table 1 (Lead (Pb) - Cl 7,8,9 )	-
9873 (Part - 3) 4.1 - Table 1 (Chromium (Cr) - Cl 7,8,9 )	-
9873 (Part - 3) 4.1 - Table 1 (Cadmium (Cd) - Cl 7,8,9)	-
9873 (Part - 3) 4.1 - Table 1 (Barium (Ba) - Cl 7,8,9 )	-
9873 (Part - 3) 4.1 - Table 1 (Arsenic (As) - Cl 7,8,9 )	-
9873 (Part - 3) 4.1 - Table 1 (Antimony (Sb) - Cl 7,8,9)	-
9873 (Part - 9) 3 (Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-
9873 (Part - 9) 3 (Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-
9874 (Part - 4) 4.7.3.1 (Swings intended for children under 36 months)	-
9874 (Part - 4) 4.8 (Seesaws - The sitting or standing position of the seesaw may swing out of the horizontal)	-

-
Test facility is complete, except phthalates.

IS 412 (1975)

Specification for expanded metal steel sheets for general purposes (Second Revision)

675 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 3.2 (Sulphur)	-
Cl. 3.2 (Phosphorus)	-
Cl. 3.2 (Nitrogen)	-

-
Test facility is complete

IS 4432 (1988)

Specification for case hardening steels (First Revision)

Please see remarks. View breakup
Rs 11660/- excluding Grain size, Cleanliness of steel and additional tests For elements other than Table-1: Rs 1004/- per element

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
TABLE-1 (Clause-5) ( CARBON)	-
TABLE-1 (Clause-5) (SULPHUR)	-
TABLE-1 (Clause-5) (PHOSPHURS)	-
TABLE-1 (Clause-5) (MANGANESE)	-
TABLE-1 (Clause-5) (SILICON)	-
TABLE-1 (Clause-5) (NITROGEN)	-

-
Excluding Cr, Ni, Mo, Cu and V

IS 4409 (1973)

Specification for ferronickel (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.4, Table 1 (C)	-
Cl.4, Table 1 (Si)	-
Cl.4, Table 1 (Mn)	-
Cl.4, Table 1 (P)	-
Cl.4, Table 1 (S)	-

-
Chemical tests not available

First
Prev
2
3
4
5
Next
Last

Bureau of Indian Standards

The National Standards Body of India

BIS, Northern Regional Laboratory (NRL)

B-69, Industrial Focal Point, Phase VII, Mohali, Mohali, S.A.S Nagar, Punjab, 160059

- nrol@bis.gov.in

Scope List

No Record Found