BIS - LIMS (Laboratory Information Management System)

Alpha Test House Private Limited, Delhi

487/25, Near Prachin Shiv Mandir Peeragarhi, DELHI, New Delhi, Delhi, 110087

9711227171 electrical@alphatesthouse.com

Scope List

Reset

96 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 1258 (2005)

Bayonet lamp holders (Fourth Revision)

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1(Marking )	-	60	-
8.2(Marking )	-	60	-
8.3(Marking )	-	60	-
8.4(Marking )	-	60	-
8.5(Marking )	-	60	-
8.6(Marking )	-	50	-
8.7(Marking )	-	50	-
8.8(Marking )	-	60	-
6(Rating )	-	400	-
6(Rating )	-	400	-
7(Classification)	-	400	-
7.2(Classification)	-	100	-
7.3(Classification)	-	100	-
7.4(Classification)	-	100	-
7.5(Classification)	-	100	-
7.6(Classification)	-	100	-
9.1(Dimensions)	-	500	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.2(Dimensions)	-	150	-
9.3(Dimensions)	-	150	-
9.3(Dimensions)	-	150	-
9.3(Dimensions)	-	150	-
9.3(Dimensions)	-	150	-
9.3(Dimensions)	-	150	-
9.3(Dimensions)	-	150	-
9.3(Dimensions)	-	150	-
10(Protection against electric shock )	-	1000	-
11.1(Terminals)	-	125	-
11.2(Terminals)	-	125	-
11.3(Terminals)	-	125	-
11.3(Terminals)	-	125	-
11.3(Terminals)	-	125	-
11.3(Terminals)	-	125	-
11.3(Terminals)	-	125	-
11.3(Terminals)	-	125	-
11.4(Terminals)	-	125	-
12(Provision for Earthing)	-	1000	-
13.1(Construction)	-	110	-
13.1(Construction (Data Sheet No 7005-10))	-	110	-
13.1(Construction (Data Sheet No 7005-10& 7006-15A))	-	110	-
13.2(Construction (Data Sheet No 7005-10& 7006-15A))	-	110	-
13.3(Construction )	-	110	-
13.4(Construction )	-	110	-
13.5(Construction)	-	110	-
13.2 ,13.6 & 13.7 (Construction)	-	110	-
13.2 ,13.6 & 13.8(Construction)	-	110	-
13.11(Construction)	-	110	-
14(Construction)	-	500	-
15.1(Moisture Resistance, Insulation Resistance and Electric Strength)	-	700	-
15.2(Moisture Resistance, Insulation Resistance and Electric Strength)	-	700	-
15.3(Moisture Resistance, Insulation Resistance and Electric Strength)	-	700	-
16.1(Mechanical Strength)	-	500	-
16.1(Mechanical Strength)	-	60	-
16.2(Mechanical Strength)	-	60	-
16.3(Mechanical Strength)	-	60	-
16.4(Mechanical Strength)	-	60	-
16.5(Mechanical Strength)	-	60	-
16.6 & Table - 6(Mechanical Strength)	-	60	-
16.7(Mechanical Strength)	-	60	-
16.8(Mechanical Strength)	-	60	-
17(Screws,current-carrying parts and connections)	-	500	-
18(Creepage distances and Clearances)	-	500	-
18.1, Table 8(Creepage distances and Clearances)	-	500	-
18.1, Table 8(Creepage distances and Clearances)	-	500	-
18.1, Table 8(Creepage distances and Clearances)	-	500	-
18.1, Table 8(Creepage distances and Clearances)	-	500	-
18.1, Table 8(Creepage distances and Clearances)	-	500	-
18.1, Table 8(Creepage distances and Clearances)	-	500	-
18.1, Table 8(Creepage distances and Clearances)	-	500	-
19.1(General resistance to heat)	-	375	-
19.2(General resistance to heat)	-	375	-
19.3(General resistance to heat)	-	375	-
19.4(Resistance to heat test)	-	375	-
20.1(Resistance to heat, fire and tracking)	-	500	-
20.3(Resistance to heat, fire and tracking)	-	500	-
20.4(Resistance to heat, fire and tracking)	-	500	-
20.5(Resistance to tracking)	-	500	-
21.1(Resistance to excessive residual stresses and to rusting)	-	500	-
21.1(Resistance to excessive residual stresses and to rusting)	-	500	-
8.1(Marking )	-	500	-
8.1(Marking )	-	60	-
8.1(Marking )	-	60	-
8.1(Marking )	-	60	-
8.1(Marking )	-	60	-
8.1(Marking )	-	60	-
8.1(Marking )	-	60	-
8.1(Marking )	-	60	-
8.1(Marking )	-	60	-
8.1(Marking )	-	60	-
8.1(Marking )	-	60	-
8.1(Marking )	-	60	-
8.1(Marking )	-	60	-
8.2(Marking )	-	60	-
8.2(Marking )	-	60	-
8.2(Marking )	-	60	-
8.3(Marking )	-	60	-
8.4(Marking )	-	60	-
8.5(Marking )	-	60	-
8.6(Marking )	-	60	-
8.7(Marking )	-	60	-
8.8(Marking )	-	60	-
6(Rating )	-	400	-
6(Rating )	-	400	-
7(Classification)	-	500	-
7.2(Classification)	-	100	-
7.3(Classification)	-	100	-
7.4(Classification)	-	100	-
7.5(Classification)	-	100	-
7.6(Classification)	-	100	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.2(Dimensions)	-	150	-
9.3(Dimensions)	-	150	-
9.3(Dimensions)	-	150	-
9.3(Dimensions)	-	150	-
9.3(Dimensions)	-	150	-
9.3(Dimensions)	-	150	-
9.3(Dimensions)	-	1501	-
10(Protection against electric shock )	-	1000	-
11.1(Terminals)	-	125	-
11.2(Terminals)	-	125	-
11.3(Terminals)	-	125	-
12.3(Terminals)	-	125	-
11.3(Terminals)	-	125	-
11.3(Terminals)	-	125	-
11.3(Terminals)	-	125	-
11.3(Terminals)	-	125	-
11.4(Terminals)	-	125	-
12(Provision for Earthing)	-	125	-
13.1(Construction)	-	110	-
13.1(Construction (Data Sheet No 7005-10))	-	110	-
13.1(Construction (Data Sheet No 7005-10& 7006-15A))	-	110	-
13.2(Construction (Data Sheet No 7005-10& 7006-15A))	-	110	-
13.3(Construction )	-	110	-
13.4(Construction )	-	110	-
13.5(Construction)	-	110	-
13.2 ,13.6 & 13.7 (Construction)	-	110	-
13.2 ,13.6 & 13.8(Construction)	-	110	-
13.11(Construction)	-	110	-
14(Construction)	-	500	-
15.1(Moisture Resistance, Insulation Resistance and Electric Strength)	-	700	-
15.2(Moisture Resistance, Insulation Resistance and Electric Strength)	-	700	-
15.3(Moisture Resistance, Insulation Resistance and Electric Strength)	-	70060	-
16.1(Mechanical Strength)	-	60	-
16.1(Mechanical Strength)	-	60	-
16.2(Mechanical Strength)	-	60	-
16.3(Mechanical Strength)	-	60	-
16.4(Mechanical Strength)	-	60	-
16.5(Mechanical Strength)	-	60	-
16.6 & Table - 6(Mechanical Strength)	-	60	-
16.7(Mechanical Strength)	-	60	-
16.8(Mechanical Strength)	-	60	-
17(Screws,current-carrying parts and connections)	-	500	-
18(Creepage distances and Clearances)	-	500	-
18(Creepage distances and Clearances)	-	500	-
18(Creepage distances and Clearances)	-	500	-
18(Creepage distances and Clearances)	-	500	-
18(Creepage distances and Clearances)	-	500	-
18(Creepage distances and Clearances)	-	500	-
18(Creepage distances and Clearances)	-	500	-
18(Creepage distances and Clearances)	-	500	-
19.1(General resistance to heat)	-	375	-
19.2(General resistance to heat)	-	375	-
19.3(General resistance to heat)	-	375	-
19.4(Resistance to heat test)	-	500	-
20.1(Resistance to heat, fire and tracking)	-	500	-
20.3(Resistance to heat, fire and tracking)	-	500	-
20.4(Resistance to heat, fire and tracking)	-	500	-
20.5(Resistance to tracking)	-	500	-
21.1(Resistance to excessive residual stresses and to rusting)	-	500	-
21.1(Resistance to excessive residual stresses and to rusting)	-	500	-
8.1(Marking )	-	-	-
8.2(Marking )	-	-	-
8.3(Marking )	-	-	-
8.4(Marking )	-	-	-
8.5(Marking )	-	-	-
8.6(Marking )	-	-	-
8.7(Marking )	-	-	-
8.8(Marking )	-	-	-
6(Rating )	-	-	-
6(Rating )	-	-	-
7(Classification)	-	-	-
7.2(Classification)	-	-	-
7.3(Classification)	-	-	-
7.4(Classification)	-	-	-
7.5(Classification)	-	-	-
7.6(Classification)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.2(Dimensions)	-	-	-
9.3(Dimensions)	-	-	-
9.3(Dimensions)	-	-	-
9.3(Dimensions)	-	-	-
9.3(Dimensions)	-	-	-
9.3(Dimensions)	-	-	-
9.3(Dimensions)	-	-	-
9.3(Dimensions)	-	-	-
10(Protection against electric shock )	-	-	-
11.1(Terminals)	-	-	-
11.2(Terminals)	-	-	-
11.3(Terminals)	-	-	-
11.3(Terminals)	-	-	-
11.3(Terminals)	-	-	-
11.3(Terminals)	-	-	-
11.3(Terminals)	-	-	-
11.3(Terminals)	-	-	-
11.4(Terminals)	-	-	-
12(Provision for Earthing)	-	-	-
13.1(Construction)	-	-	-
13.1(Construction (Data Sheet No 7005-10))	-	-	-
13.1(Construction (Data Sheet No 7005-10& 7006-15A))	-	-	-
13.2(Construction (Data Sheet No 7005-10& 7006-15A))	-	-	-
13.3(Construction )	-	-	-
13.4(Construction )	-	-	-
13.5(Construction)	-	-	-
13.2 ,13.6 & 13.7 (Construction)	-	-	-
13.2 ,13.6 & 13.8(Construction)	-	-	-
13.11(Construction)	-	-	-
14(Construction)	-	-	-
15.1(Moisture Resistance, Insulation Resistance and Electric Strength)	-	-	-
15.2(Moisture Resistance, Insulation Resistance and Electric Strength)	-	-	-
15.3(Moisture Resistance, Insulation Resistance and Electric Strength)	-	-	-
16.1(Mechanical Strength)	-	-	-
16.1(Mechanical Strength)	-	-	-
16.2(Mechanical Strength)	-	-	-
16.3(Mechanical Strength)	-	-	-
16.4(Mechanical Strength)	-	-	-
16.5(Mechanical Strength)	-	-	-
16.6 & Table - 6(Mechanical Strength)	-	-	-
16.7(Mechanical Strength)	-	-	-
16.8(Mechanical Strength)	-	-	-
17(Screws,current-carrying parts and connections)	-	-	-
18(Creepage distances and Clearances)	-	-	-
18.1, Table 8(Creepage distances and Clearances)	-	-	-
18.1, Table 8(Creepage distances and Clearances)	-	-	-
18.1, Table 8(Creepage distances and Clearances)	-	-	-
18.1, Table 8(Creepage distances and Clearances)	-	-	-
18.1, Table 8(Creepage distances and Clearances)	-	-	-
18.1, Table 8(Creepage distances and Clearances)	-	-	-
18.1, Table 8(Creepage distances and Clearances)	-	-	-
19.1(General resistance to heat)	-	-	-
19.2(General resistance to heat)	-	-	-
19.3(General resistance to heat)	-	-	-
19.4(Resistance to heat test)	-	-	-
20.1(Resistance to heat, fire and tracking)	-	-	-
20.3(Resistance to heat, fire and tracking)	-	-	-
20.4(Resistance to heat, fire and tracking)	-	-	-
20.5(Resistance to tracking)	-	-	-
21.1(Resistance to excessive residual stresses and to rusting)	-	-	-
21.1(Resistance to excessive residual stresses and to rusting)	-	-	-
8.1(Marking )	-	-	-
8.1(Marking )	-	-	-
8.1(Marking )	-	-	-
8.1(Marking )	-	-	-
8.1(Marking )	-	-	-
8.1(Marking )	-	-	-
8.1(Marking )	-	-	-
8.1(Marking )	-	-	-
8.1(Marking )	-	-	-
8.1(Marking )	-	-	-
8.1(Marking )	-	-	-
8.1(Marking )	-	-	-
8.1(Marking )	-	-	-
8.2(Marking )	-	-	-
8.2(Marking )	-	-	-
8.2(Marking )	-	-	-
8.3(Marking )	-	-	-
8.4(Marking )	-	-	-
8.5(Marking )	-	-	-
8.6(Marking )	-	-	-
8.7(Marking )	-	-	-
8.8(Marking )	-	-	-
6(Rating )	-	-	-
6(Rating )	-	-	-
7(Classification)	-	-	-
7.2(Classification)	-	-	-
7.3(Classification)	-	-	-
7.4(Classification)	-	-	-
7.5(Classification)	-	-	-
7.6(Classification)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.2(Dimensions)	-	-	-
9.3(Dimensions)	-	-	-
9.3(Dimensions)	-	-	-
9.3(Dimensions)	-	-	-
9.3(Dimensions)	-	-	-
9.3(Dimensions)	-	-	-
9.3(Dimensions)	-	-	-
10(Protection against electric shock )	-	-	-
11.1(Terminals)	-	-	-
11.2(Terminals)	-	-	-
11.3(Terminals)	-	-	-
12.3(Terminals)	-	-	-
11.3(Terminals)	-	-	-
11.3(Terminals)	-	-	-
11.3(Terminals)	-	-	-
11.3(Terminals)	-	-	-
11.4(Terminals)	-	-	-
12(Provision for Earthing)	-	-	-
13.1(Construction)	-	-	-
13.1(Construction (Data Sheet No 7005-10))	-	-	-
13.1(Construction (Data Sheet No 7005-10& 7006-15A))	-	-	-
13.2(Construction (Data Sheet No 7005-10& 7006-15A))	-	-	-
13.3(Construction )	-	-	-
13.4(Construction )	-	-	-
13.5(Construction)	-	-	-
13.2 ,13.6 & 13.7 (Construction)	-	-	-
13.2 ,13.6 & 13.8(Construction)	-	-	-
13.11(Construction)	-	-	-
14(Construction)	-	-	-
15.1(Moisture Resistance, Insulation Resistance and Electric Strength)	-	-	-
15.2(Moisture Resistance, Insulation Resistance and Electric Strength)	-	-	-
15.3(Moisture Resistance, Insulation Resistance and Electric Strength)	-	-	-
16.1(Mechanical Strength)	-	-	-
16.1(Mechanical Strength)	-	-	-
16.2(Mechanical Strength)	-	-	-
16.3(Mechanical Strength)	-	-	-
16.4(Mechanical Strength)	-	-	-
16.5(Mechanical Strength)	-	-	-
16.6 & Table - 6(Mechanical Strength)	-	-	-
16.7(Mechanical Strength)	-	-	-
16.8(Mechanical Strength)	-	-	-
17(Screws,current-carrying parts and connections)	-	-	-
18(Creepage distances and Clearances)	-	-	-
18(Creepage distances and Clearances)	-	-	-
18(Creepage distances and Clearances)	-	-	-
18(Creepage distances and Clearances)	-	-	-
18(Creepage distances and Clearances)	-	-	-
18(Creepage distances and Clearances)	-	-	-
18(Creepage distances and Clearances)	-	-	-
18(Creepage distances and Clearances)	-	-	-
19.1(General resistance to heat)	-	-	-
19.2(General resistance to heat)	-	-	-
19.3(General resistance to heat)	-	-	-
19.4(Resistance to heat test)	-	-	-
20.1(Resistance to heat, fire and tracking)	-	-	-
20.3(Resistance to heat, fire and tracking)	-	-	-
20.4(Resistance to heat, fire and tracking)	-	-	-
20.5(Resistance to tracking)	-	-	-
21.1(Resistance to excessive residual stresses and to rusting)	-	-	-
21.1(Resistance to excessive residual stresses and to rusting)	-	-	-

-
Included w.e.f. 10.07.2024

IS 15787 (2008)

Switch - Socket - Outlets (Non - Interlock Type)

26550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.30 IS 15787:2008(Additional tests on pins providing with insulating sleeves)	-	0	Rs.22500 (Upto 10A), Rs.26550 (Above 10A)
Cl.29 IS 15787:2008(Resistance to Rusting)	-	1000	Rs.22500 (Upto 10A), Rs.26550 (Above 10A)
Cl.28 IS 15787:2008(Resistance of insulating material to Abnormal Heat , To Fire & To tracking )	-	850	Rs.22500 (Upto 10A), Rs.26550 (Above 10A)
Cl.27 IS 15787:2008(Creepage distance, clearances & Distance through sealing compounds)	-	500	Rs.22500 (Upto 10A), Rs.26550 (Above 10A)
Cl.26 IS 15787:2008(Screws, current carrying parts & connections)	-	500	Rs.22500 (Upto 10A), Rs.26550 (Above 10A)
Cl.25 IS 15787:2008(Resistance to heat )	-	1000	Rs.22500 (Upto 10A), Rs.26550 (Above 10A)
Cl.24 IS 15787:2008(Mechanical strength)	-	1000	Rs.22500 (Upto 10A), Rs.26550 (Above 10A)
Cl.23 IS 15787:2008(Flexible cables & their connections)	-	0	Rs.22500 (Upto 10A), Rs.26550 (Above 10A)
Cl.22 IS 15787:2008(Force necessary to withdraw the plug )	-	1000	Rs.22500 (Upto 10A), Rs.26550 (Above 10A)
Cl.21 IS 15787:2008(Normal operation )	-	3000	Rs.22500 (Upto 10A), Rs.26550 (Above 10A)
Cl.20 IS 15787:2008(Making & Breaking )	-	2000	Rs.22500 (Upto 10A), Rs.26550 (Above 10A)
Cl.19 IS 15787:2008(Temperature rise )	-	1000	Rs.22500 (Upto 10A), Rs.26550 (Above 10A)
Cl.18 IS 15787:2008(Operation of Earthing Contacts)	-	600	Rs.22500 (Upto 10A), Rs.26550 (Above 10A)
Cl.17 IS 15787:2008(Insulation resistance & electric strength )	-	1500	Rs.22500 (Upto 10A), Rs.26550 (Above 10A)
Cl.16 IS 15787:2008(Resistance to ageing,To harmful ingress of water and To Humidity)	-	1500	Rs.22500 (Upto 10A), Rs.26550 (Above 10A)
Cl.15 IS 15787:2008(Interlocked Socket-outlet )	-	0	Rs.22500 (Upto 10A), Rs.26550 (Above 10A)
Cl.14 IS 15787:2008(Construction of Plugs and Portable Socket- Outlet )	-	1000	Rs.22500 (Upto 10A), Rs.26550 (Above 10A)
Cl.13 IS 15787:2008(Construction of fixed socket outlet)	-	1000	Rs.22500 (Upto 10A), Rs.26550 (Above 10A)
Cl.12 IS 15787:2008(Terminals)	-	1500	Rs.22500 (Upto 10A), Rs.26550 (Above 10A)
Cl.11 IS 15787:2008(Provision for earthing )	-	1000	Rs.22500 (Upto 10A), Rs.26550 (Above 10A)
Cl.10 IS 15787:2008(Protection against to electric shock )	-	1000	Rs.22500 (Upto 10A), Rs.26550 (Above 10A)
Cl.9 IS 15787:2008(Checking of dimension)	-	1000	Rs.22500 (Upto 10A), Rs.26550 (Above 10A)
Cl.8 IS 15787:2008(Marking )	-	1000	Rs.22500 (Upto 10A), Rs.26550 (Above 10A)
Cl.7 IS 15787:2008(Classification)	-	800	Rs.22500 (Upto 10A), Rs.26550 (Above 10A)
Cl.6 IS 15787:2008(Ratings )	-	550	Rs.22500 (Upto 10A), Rs.26550 (Above 10A)
Cl.30 IS 15787:2008(Additional tests on pins providing with insulating sleeves)	-	0	-
Cl.29 IS 15787:2008(Resistance to Rusting)	-	0	-
Cl.28 IS 15787:2008(Resistance of insulating material to Abnormal Heat , To Fire & To tracking )	-	0	-
Cl.27 IS 15787:2008(Creepage distance, clearances & Distance through sealing compounds)	-	0	-
Cl.26 IS 15787:2008(Screws, current carrying parts & connections)	-	0	-
Cl.25 IS 15787:2008(Resistance to heat )	-	0	-
Cl.24 IS 15787:2008(Mechanical strength)	-	0	-
Cl.23 IS 15787:2008(Flexible cables & their connections)	-	0	-
Cl.22 IS 15787:2008(Force necessary to withdraw the plug )	-	0	-
Cl.21 IS 15787:2008(Normal operation )	-	0	-
Cl.20 IS 15787:2008(Making & Breaking )	-	0	-
Cl.19 IS 15787:2008(Temperature rise )	-	0	-
Cl.18 IS 15787:2008(Operation of Earthing Contacts)	-	0	-
Cl.17 IS 15787:2008(Insulation resistance & electric strength )	-	0	-
Cl.16 IS 15787:2008(Resistance to ageing,To harmful ingress of water and To Humidity)	-	0	-
Cl.15 IS 15787:2008(Interlocked Socket-outlet )	-	0	-
Cl.14 IS 15787:2008(Construction of Plugs and Portable Socket- Outlet )	-	0	-
Cl.13 IS 15787:2008(Construction of fixed socket outlet)	-	0	-
Cl.12 IS 15787:2008(Terminals)	-	0	-
Cl.11 IS 15787:2008(Provision for earthing )	-	0	-
Cl.10 IS 15787:2008(Protection against to electric shock )	-	0	-
Cl.9 IS 15787:2008(Checking of dimension)	-	0	-
Cl.8 IS 15787:2008(Marking )	-	0	-
Cl.7 IS 15787:2008(Classification)	-	0	-
Cl.6 IS 15787:2008(Ratings )	-	0	-

-
Included w.e.f. 01.05.2024

IS 17505 : Part 1 (2021)

Specification for Thermosetting Insulated Fire Survival Cables for Fixed Installation having Low Emission of Smoke and Corrosive Gases when Affected by Fire for Working Voltages upto and including 1100 Vac and 1500 Vdc

140000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	1000	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	500	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	1000	-
Cl. 11,14,16, Table 4 and Table 6 of IS 17505 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 36)-1984(Diameter of armour Wire)	-	250	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 37)-1984(Tensile strength and elongation at break)	-	250	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 38)-1984(Torsion Test on galvanised steel wire for armouring)	-	250	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 39)-1984(Winding Test for Formed Wires)	-	250	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 40)-1984(Uniformity of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	350	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 41)-1984(Mass of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	350	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 42)-1984(Resistivity test)	-	500	-
Table 1 and Table 2 of IS 17505 -1: 2021, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	3000	-
Cl 18.2 of IS 17505-1:2021 & IS:10810 (Part 45)-1984(High voltage test)	-	2000	-
Table 1 of IS 17505-1 :2021 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	2000	-
Cl. 18.6 of IS 17505-1:2021 & IS:10810 (Part 58)-1998(Oxygen index)	-	3000	-
Cl. 18.7 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	3000	-
Table-1 & Table-2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	3000	-
Specification for thermosetting insulated fire survival cables for fixed installation having low emission of smoke and corrosive gases when affected by fire for working voltages upto and including 1100 V A.C. and 1500 V D.C(Hot deformation)	-	500	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	10000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	10000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	10000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	10000	-
Table 1 of IS 17505-1: 2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	500	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 30)-1984(Hot set test)	-	2000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone Resistance test)	-	5000	-
Cl 18.5.1 of IS 17505-1 :2021 & IS:10810 (Part 61)-1988(Flame test on single cable)	-	2000	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 7)-1984(Tensile strength and elongation at break.)	-	1500	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Cl 18.6 of IS 17505-1: 2021 & IS:10810 (Part 58)-1998(Oxygen Index.)	-	0	-
Cl 18.8 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	0	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone resistance test)	-	0	-
Table 2 of IS 17505-1:2021 & IS:10810 (Part 15)-1984(Hot deformation)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	500	-
Cl 18.2of IS 17505-1:2021 & IS:10810 (Part 45)-1984.(High Voltage test.)	-	0	-
Cl 18.5of IS 17505-1:2021 & IS:10810 (Part 53)-1984(Flammability Test)	-	1000	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 20)-1984(Cold bend test)	-	500	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	0	-
Cl 18.5 of IS 17505-1:2021 & IS:10810 (Part 61)-1988(Flammability Test)	-	0	-
Cl 18.9 of IS 17505-1:2021(Water immersion test ( effect of water on sheath of cable))	-	2000	-
Cl 18.8 of IS 17505-1:2021& IS:10810 (Part 63)-1993(Smoke density test)	-	5000	-
Cl. 3.5, 18.4 & Annex-E of IS 17505-1:2021(Circuit integrity test under fire)	-	45000	-
Cl. 17.1 Table 9 (iv) e(Heat Shock)	-	500	-
Cl. 17.1 Table 9 (iv) h(Water absorption (Gravimetric))	-	3000	-
Cl. 17.1 Table 9 (vii) b(Flame test on bunched cable)	-	5000	-
Cl. 17.1 Table 9 (ix)(Abrasion resistance test)	-	5000	-
IS 191:2007 & IS 440(Copper purity test)	-	0	-

-
Included w.e.f. 01.05.2024 Exclusion: IS 191:2007 & IS 440 (Copper Purity Test)

IS 3854 (2023)

Switches for Domestic and Similar Purposes - Specification (Third Revision)

25000 View breakup
Rs. 20000/- up to 32A, Rs. 25000/- for over 32A

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	500	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-5(General notes on tests)	-	500	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-6(Rating)	-	500	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-7(Classification)	-	800	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-8(Marking)	-	1000	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-9(Checking of dimensions)	-	1000	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-10.1, 10.2(Prevention of Access to Live Parts)	-	400	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-10.3(Requirements for Accessible Metal Parts)	-	150	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-10.4(Requirements for Insulation of the Mechanism)	-	150	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl. 10.5(Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-	100	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-10.6(Requirements for Switches Operated Indirectly)	-	100	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-10.7(Requirements for Switches with Replaceable Pull Cord)	-	100	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-11(Provision for earthing)	-	1000	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-12(Terminals)	-	1500	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-13(Constructional requirements)	-	1000	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-14(Mechanism)	-	1200	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-15.1(Resistance to Ageing)	-	500	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-15.2(Protection Provided by Enclosures of Switches)	-	1000	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-15.3(Resistance to Humidity)	-	500	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-16.1(General)	-	0	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-16.2(Test for Measuring the Insulation Resistance)	-	500	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-16.3(Electric Strength Test)	-	500	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-17(Temperature rise)	-	1000	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-18(Making and breaking capacity)	-	2000	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-19(Normal operation)	-	3000	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-20(Mechanical strength)	-	1000	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-21(Resistance to heat)	-	1000	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-22(Screws, current carrying parts and connections)	-	1000	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-23(Creepage distances, clearances and distance through sealing compound)	-	1000	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-24.1(Resistance to abnormal heat and fire)	-	500	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-24.2(Resistance to tracking)	-	500	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-25(Resistance to rusting)	-	1000	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-4(General Requirements)	-	-	-
Cl-5(General notes on tests)	-	-	-
Cl-6(Rating)	-	-	-
Cl-7(Classification)	-	-	-
Cl-8(Marking)	-	-	-
Cl-9(Checking of dimensions)	-	-	-
Cl-10.1, 10.2(Prevention of Access to Live Parts)	-	-	-
Cl-10.3(Requirements for Accessible Metal Parts)	-	-	-
Cl-10.4(Requirements for Insulation of the Mechanism)	-	-	-
Cl. 10.5(Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-	-	-
Cl-10.6(Requirements for Switches Operated Indirectly)	-	-	-
Cl-10.7(Requirements for Switches with Replaceable Pull Cord)	-	-	-
Cl-11(Provision for earthing)	-	-	-
Cl-12(Terminals)	-	-	-
Cl-13(Constructional requirements)	-	-	-
Cl-14(Mechanism)	-	-	-
Cl-15.1(Resistance to Ageing)	-	-	-
Cl-15.2(Protection Provided by Enclosures of Switches)	-	-	-
Cl-15.3(Resistance to Humidity)	-	-	-
Cl-16.1(General)	-	-	-
Cl-16.2(Test for Measuring the Insulation Resistance)	-	-	-
Cl-16.3(Electric Strength Test)	-	-	-
Cl-17(Temperature rise)	-	-	-
Cl-18(Making and breaking capacity)	-	-	-
Cl-19(Normal operation)	-	-	-
Cl-20(Mechanical strength)	-	-	-
Cl-21(Resistance to heat)	-	-	-
Cl-22(Screws, current carrying parts and connections)	-	-	-
Cl-23(Creepage distances, clearances and distance through sealing compound)	-	-	-
Cl-24.1(Resistance to abnormal heat and fire)	-	-	-
Cl-24.2(Resistance to tracking)	-	-	-
Cl-25(Resistance to rusting)	-	-	-

-
Included w.e.f. 22.03.2024

IS 16047 : Part 3 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Secondary Lithium Cells and Batteries for Portable Applications Part 3 Prismatic and Cylindrical Lithium Secondary Cells, and Batteries Made From Them ( First Revision )

300000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Cell Designation and Marking)	-	5000	-
7.1, 7.2(Charging Procedure for Test Purpose)	-	10000	-
7.3.1(Discharge Performance at 20°C (Rated Capacity))	-	15000	-
7.3.2("Discharge Performance at -20°C ")	-	20000	-
7.3.3(High Rate Discharge Performance at 20°C)	-	15000	-
7.4(Charge (capacity) Retention and Recovery)	-	40000	-
7.5(Charge (Capacity) Recovery After Long Term Storage)	-	80000	-
7.6.2(Endurance In Cycles at a Rate of 0.2It A)	-	50000	-
7.6.3("Endurance in Cycles at a Rate of 0.5It A (Accelerated Test Procedure) ")	-	50000	-
7.7(Battery Internal Resistance)	-	10000	-

-
Included w.e.f. 22.03.2024 Exclusion: Cl.7.8 (Electrostatic Discharge (ESD))

IS 3854 (1997)

Switches for domestic and similar purposes - Specification (Second Revision)

10000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Marking)	-	20	-
8(Marking)	-	20	-
8(Marking)	-	20	-
8(Marking)	-	20	-
8(Marking)	-	20	-
8(Marking)	-	20	-
8(Marking)	-	20	-
8(Marking)	-	20	-
8(Marking)	-	20	-
8.9(Marking)	-	20	Test
8(Marking)	-	20	-
6(Rating)	-	20	-
6(Rating)	-	20	-
7(Classification)	-	20	-
7(Classification)	-	20	-
7(Classification)	-	20	-
7(Classification)	-	20	-
7(Classification)	-	20	-
7(Classification)	-	20	-
7(Classification)	-	20	-
7(Classification)	-	20	-
7(Classification)	-	20	-
10(Protection against Electric Shock)	-	20	Test
11.1(Provision for earthing)	-	20	Test
12(Terminals)	-	20	Test
12.2.1(Terminals)	-	20	-
12(Terminals)	-	20	-
12.2.2(Connection of conductor)	-	20	-
12.2.3(Mechanical strength of terminals)	-	20	-
12.2.3(Mechanical strength of terminals)	-	20	-
12.2.4(Resistance to corrosion)	-	20	-
12.2.4(Resistance to corrosion)	-	20	-
12.2.5(Undue damage to conductor)	-	50	Test
12.2.7(Insertion of conductor)	-	20	Test
12.2.9(Locking against accidental loosening)	-	20	Test
12.2.11(Distance between screw and conductor)	-	20	Test
12.2.11(Distance between screw and conductor)	-	20	-
12.3.2(Screwless terminals)	-	20	Test
12.3.3(Connectin of conductor)	-	20	-
12.3.4(Material of terminals)	-	20	-
12.3.5(Clamping)	-	20	Test
12.3.5(Clamping)	-	20	-
12.3.7(v) Interconnection of conductors [Cl. 12.3.7])	-	20	-
12.3.7(v) Interconnection of conductors [Cl. 12.3.7])	-	20	-
12.3.11(vi) Electrical & Thermal Stresses [Cl 12.3.11])	-	20	Test
12.3.11(vi) Electrical & Thermal Stresses [Cl 12.3.11])	-	20	-
12.3.12(vii) Deflection Stresses [Cl. 12.3.12])	-	20	Test
13.1(a) Insulating lining, barriers and the like [Cl 13.1])	-	20	-
13.2(b) Construction of switch [Cl 13.2])	-	20	-
13.2(i) Installation Test)	-	20	Test
13.3(c) Covers,cover plates and actuating members [Cl 13.3])	-	20	Test
13.4(d) Ordinary switches [Cl 13.4])	-	20	Test
13.5(e) Rotary switches [Cl 13.5])	-	20	Test
13.6(f) Screws and other means [Cl 13.6])	-	20	-
13.7(g) Combination of switches or switches and socket outlets [Cl 13.7])	-	20	-
13.8(h) Assessories combined with switches [Cl. 13.8])	-	20	-
13.9(j) Switches other than ordinary switches [Cl. 13.9])	-	20	Test
13.9(j) Switches other than ordinary switches [Cl. 13.9])	-	20	-
13.9(j) Switches other than ordinary switches [Cl. 13.9])	-	20	-
13.9(j) Switches other than ordinary switches [Cl. 13.9])	-	20	-
13.9(j) Switches other than ordinary switches [Cl. 13.9])	-	20	-
13.9(j) Switches other than ordinary switches [Cl. 13.9])	-	20	-
13.9(j) Switches other than ordinary switches [Cl. 13.9])	-	20	-
13.1(k) Switches to be installed in a box [Cl. 13.10])	-	20	-
13.11(l) Surface type switches other than ordinary switch [Cl. 13.11])	-	20	Test
13.12, 13.13, 13.14(m) Inlet opening [Cl. 13.12.13.13 & 13.14])	-	20	Test
13.15(q) Requirements for membrane in inlet opening [ Cl. 13.15])	-	20	Test
13.15(q) Requirements for membrane in inlet opening [ Cl. 13.15])	-	20	-
13.15(q) Requirements for membrane in inlet opening [ Cl. 13.15])	-	20	-
13.15(q) Requirements for membrane in inlet opening [ Cl. 13.15])	-	20	-
14(Mechanism [Cl. 14])	-	20	-
14.4(Mechanism)	-	20	Test
15.1(Resistance to Ageing, to Harmful Ingress of water and to Humidity [Cl. 15]: Resistance to Ageing, [Cl. 15.1])	-	100	Test
15.2(b)Resistance to Harmful ingress of water [Cl. 15.2])	-	100	Test
15.2(b)Resistance to Harmful ingress of water [Cl. 15.2])	-	100	-
15.3(c) Resistance to Humidity [Cl. 15.3])	-	200	Test
16.1(Insulation resistance [Cl. 16.1])	-	200	Test
16.2( Electric Strength [Cl. 16.2])	-	200	Test
17(Temperature- rise [Cl. 17])	-	200	Test
18(Marking and breaking Capacity[Cl. 18])	-	250	-
18(Marking and breaking Capacity[Cl. 18])	-	250	Test
19(Normal Operation [Cl. 19] a) General & Operation)	-	500	-
19.2(Normal Operation (For AX type Switches) [Cl. 19.2])	-	500	-
19(b) Electric Strength)	-	200	-
19(c)Temperature-rise )	-	200	-
14.3(d)Test for arcing and sparking [Cl 14.3])	-	200	Test
19.2(Normal Operation (For AX type Switches) [Cl. 19.2])	-	200	Test
20(Mechanical Strength Test [Cl. 20])	-	20	Test
21(Resistance to Heat [Cl.21])	-	20	Test
21(Resistance to Heat [Cl.21])	-	20	-
21(Resistance to Heat [Cl.21])	-	20	-
22(Screw, Current Carrying Part And Connection [Cl.22])	-	20	-
22.1(i) Screw & Nuts [Cl.22.1])	-	20	Test
22.4(ii) Screw & rivets [Cl . 22.4])	-	20	-
22.3(iii) Electrical Connections [Cl.22.3])	-	20	-
22.5(iv) Current carrying part [Cl.22.5])	-	20	-
23.2(Creepage distances, clearances and distance through sealing compound [Cl.23])	-	20	Test
23(Creepage distances, clearances and distance through sealing compound [Cl.23])	-	20	-
23(Creepage distances, clearances and distance through sealing compound [Cl.23])	-	20	-
24.1.1(Resistance to Abnormal Heat & Fire [Cl.24.1] [Glow Wire Test] [Cl.24.1.1])	-	200	Test
24.2(Resistance to tracking [For Switch other than ordinary] [Cl.24.2])	-	200	Test
24.2(Resistance to tracking [For Switch other than ordinary] [Cl.24.2])	-	200	-
25 of IS 3854 : 1997(Resistance to rusting)	-	200	-
11.3(Provision for earthing)	-	20	-
11.2(Provision for earthing)	-	20	-
12.3.9(Screwless terminal fixing)	-	20	-
12.3.8(Screwless terminals design)	-	20	-
12.3.6(Connection)	-	20	-
12.3.1(Screwless terminals)	-	20	-
14.6(Mechanism)	-	20	-
14.5(Mechanism)	-	20	-
16.3(Flash test)	-	20	-
20.8(Mechanical Strength Test)	-	20	-
20.7(Mechanical Strength Test)	-	20	-
20.6(Mechanical Strength Test)	-	20	-
20.5(Mechanical Strength Test)	-	20	-
20.4(Mechanical Strength Test)	-	20	-
20.3(Mechanical Strength Test)	-	20	-
20.2(Mechanical Strength Test)	-	20	-
20.1(Mechanical Strength Test)	-	20	-
21.2(Resistance to Heat)	-	20	-
21.1(Resistance to Heat)	-	20	-
22.2(Measurement and manual test)	-	20	-
22.6(Inspection and chemical analysis)	-	20	-
24.1(Resistance of insulating material to abnormal heat, to fire and to tracking )	-	200	-
24(Resistance of insulating material to abnormal heat, to fire and to tracking )	-	200	-
23.2(Creepage distances, clearances & distance through sealing compound )	-	20	-
23.1(Creepage distances, clearances & distance through sealing compound )	-	20	-
22.7(Screws, current carrying parts and connections )	-	20	-
22.6(Screws, current carrying parts and connections )	-	20	-
22.5(Screws, current carrying parts and connections )	-	20	-
22.4(Screws, current carrying parts and connections )	-	20	-
22.3(Screws, current carrying parts and connections )	-	20	-
22.2(Screws, current carrying parts and connections )	-	20	-
22.1(Screws, current carrying parts and connections )	-	20	-
21.3(Resistance to heat )	-	40	-
21.2(Resistance to heat )	-	20	-
21.1(Resistance to heat )	-	20	-
20.9(Mechanical strength )	-	20	-
20.8(Mechanical strength )	-	10	-
20.7(Mechanical strength )	-	10	-
20.6 & 24.4.2(Mechanical strength )	-	20	-
20.6 & 24.4.1(Mechanical strength )	-	20	-
20.5 & 24.4.2(Mechanical strength )	-	20	-
20.5 & 24.4.1(Mechanical strength )	-	20	-
20.4.2(Mechanical strength )	-	20	-
20.4.1(Mechanical strength )	-	20	-
20.4(Mechanical strength )	-	20	-
20.3(Mechanical strength )	-	20	-
20.2(Mechanical strength )	-	20	-
20.1(Mechanical strength )	-	20	-
19.2(Normal operation)	-	20	-
19.1(Normal operation)	-	500	-
18.2(Making and breaking capacity )	-	200	-
18.1(Making and breaking capacity )	-	200	-
16.3(Insulation resistance and electric strength )	-	100	-
16(Insulation resistance and electric strength )	-	100	-
15.3(Resistance to ageing, to harmful ingress of water and to humidity )	-	100	-
15.2.3(Resistance to ageing, to harmful ingress of water and to humidity )	-	100	-
15.2.2(Resistance to ageing, to harmful ingress of water and to humidity )	-	100	-
15.2.1(Resistance to ageing, to harmful ingress of water and to humidity )	-	100	-
15.2(Resistance to ageing, to harmful ingress of water and to humidity )	-	100	-
15.1(Resistance to ageing, to harmful ingress of water and to humidity )	-	100	-
15(Resistance to ageing, to harmful ingress of water and to humidity )	-	100	-
14.6(Mechanism)	-	10	-
14.5(Mechanism)	-	10	-
14.4(Mechanism)	-	10	-
14.3(Mechanism)	-	10	-
14.2(Mechanism)	-	10	-
14.1(Mechanism)	-	20	-
13.15.2(Constructional requirements )	-	20	-
13.15.1(Constructional requirements )	-	20	-
13.15(Constructional requirements )	-	20	-
13.14(Constructional requirements )	-	20	-
13.13(Constructional requirements )	-	20	-
13.12(Constructional requirements )	-	20	-
13.11(Constructional requirements )	-	20	-
13.1(Constructional requirements )	-	20	-
13.9(Constructional requirements )	-	20	-
13.8(Constructional requirements )	-	20	-
13.7(Constructional requirements )	-	20	-
13.6(Constructional requirements )	-	20	-
13.5(Constructional requirements )	-	20	-
13.4(Constructional requirements )	-	20	-
13.3.3(Constructional requirements )	-	20	-
13.3.2(Constructional requirements )	-	20	-
13.3.1(Constructional requirements )	-	20	-
13.3(Constructional requirements )	-	20	-
13.2(Constructional requirements )	-	20	-
13.1(Constructional requirements )	-	20	-
13(Constructional requirements )	-	20	-
12.3.12(Terminals)	-	20	-
12.3.11.b(Terminals)	-	20	-
12.3.11.a(Terminals)	-	20	-
12.3.10(Terminals)	-	20	-
12.3.9(Terminals)	-	20	-
12.3.8(Terminals)	-	20	-
12.3.6(Terminals)	-	20	-
12.2.6(Terminals)	-	20	-
12.2(Terminals)	-	20	-
12.1(Terminals)	-	20	-
11.4(Provision for earthing)	-	20	-
11.3(Provision for earthing)	-	20	-
11.2(Provision for earthing)	-	20	-
11.1(Provision for earthing)	-	20	-
10.7(Protection against electric shock )	-	20	-
10.6(Protection against electric shock )	-	20	-
10.5(Protection against electric shock )	-	20	-
10.4(Protection against electric shock )	-	20	-
10.3.2(Protection against electric shock )	-	20	-
10.3.1(Protection against electric shock )	-	20	-
10.3(Protection against electric shock )	-	20	-
10.2(Protection against electric shock )	-	20	-
10.1(Protection against electric shock )	-	20	-
8.1(Marking)	-	20	-
8.8(Marking)	-	20	-
8.7(Marking)	-	20	-
8.6(Marking)	-	20	-
8.5(Marking)	-	20	-
8.4(Marking)	-	20	-
8.3(Marking)	-	20	-
8.2(Marking)	-	20	-
8.1(Marking)	-	20	-
7.2(Classification)	-	20	-
7.1.8(Classification)	-	20	-
7.1.7(Classification)	-	20	-
7.1.6(Classification)	-	20	-
7.1.5(Classification)	-	20	-
7.1.4(Classification)	-	20	-
7.1.3(Classification)	-	20	-
7.1.2(Classification)	-	20	-
7.1.1(Classification)	-	20	-
7.1(Classification)	-	20	-
6.2(Ratings)	-	20	-
6.1(Ratings)	-	20	-
6(Ratings)	-	20	-
25(Resistance to Rusting)	-	200	-

-
Included w.e.f. 11.10.2018

Bureau of Indian Standards

The National Standards Body of India

Alpha Test House Private Limited, Delhi

487/25, Near Prachin Shiv Mandir Peeragarhi, DELHI, New Delhi, Delhi, 110087

9711227171 electrical@alphatesthouse.com

Scope List