BIS - LIMS (Laboratory Information Management System)

Alpha Test House Private Limited, Delhi

487/25, Near Prachin Shiv Mandir Peeragarhi, DELHI, New Delhi, Delhi, 110087

9711227171 electrical@alphatesthouse.com

Scope List

Reset

87 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

45000 View breakup
Rs.29,000/- for Electronic games (Video), Rs.45,000/- for Plasma/ LCD/LED TVs of screen size upto 66", Rs.29,000/- for optical disc player with built in amplifiers of input power 200W and above, Rs.29,000/- for Amplifiers with input power 2000W and above, Rs.45,000/- for Electronic musical system with input power 200W and above, Rs.45,000/- for Power adopters for audio, video & similar electronic apparatus. ADDITIONAL PRODUCTED INCLUDED W.E.F.02-07-2020 -Rs.45,000/- for Television other than plasma / LCD / LED/ TV. Electronic Musical System with input power below 200W, Wireless Headphone & Earphone. ADDITIONAL PRODUCTS FOR PHASE V INCLUDED W.E.F. 05-11-2020: Rs.45000/- for Wireless microphone, video Camera, Webcam (finished product), Smart speakers (with and without display), Bluetooth speakers.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	2000	Nil
7(Heating under normal operating conditions)	-	8000	Nil
8(Constructional requirements with regard to the protection against electric shock)	-	3000	Nil
9(Electric shock hazard under normal operating conditions)	-	5000	Nil
10(Insulation requirements)	-	3000	Nil
11(Fault conditions)	-	5000	Nil
12(Mechanical strength)	-	3000	Nil
13(CLEARANCES and CREEPAGE DISTANCES)	-	3000	Nil
15(TERMINALS)	-	2000	Nil
16(External flexible cords)	-	2000	Nil
19(Stability and mechanical hazards)	-	3000	Nil
20(Resistance to fire)	-	3000	Nil
17(Electrical connections and mechanical fixings)	-	2000	Nil
14(Components)	-	1000	Nil

-
REVISED VERSION IS 616:2017. Excluding: lonizing radiation test (CI.6.1), Laser radiation (C1.6.2), Requirements for insulated winding wires for use without additional interleaved insulation (C1.8.16), Endurance test for wound components with insulated winding wires without additional interleaved insulation (C1.8.17), Printed Boards(Cl.13.5), Component (Cl.14), Mechanical strength of picture tubes & Protection against the effect of implosion (Cl.18)

IS 16103 : Part 1 (2012)

Led modules for general lighting: Part 1 safety requirements

37500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	2000	NIL
8(Terminals)	-	2000	NIL
9(PROVISION FOR EARTHING)	-	2000	NIL
10(Protection against accidental contact with live parts)	-	3000	NIL
11(Mositure Resistance and Insulation)	-	5000	NIL
12(Electric Strength)	-	3000	NIL
13(Fault conditions)	-	5000	NIL
15(Construction)	-	500	NIL
16(Creepage distance and clearances)	-	2000	NIL
17(Screws, current carrying parts and connections)	-	5000	NIL
18(Resistance to heat, fire and tracking)	-	3000	NIL
19(Resistance to corrosion)	-	4000	NIL
21(Heat management)	-	1000	NIL

-
Included w.e.f. 02-07-2020.

IS 1554 : Part 1 (1988)

Specification for pvc insulated (Heavy Duty) electric cables: Part 1 for working voltages up to and including 1100 v (Third Revision)

1100 V

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1(CONSTRUCTION : CONDUCTOR)	-	10	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring , Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
9.2(INSULATION : Thickness of Insulation)	-	50	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
11.1(LAYING UP OF CORES)	-	10	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
12.3(INNER SHEATH :Thickness of Inner Sheath)	-	50	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
13.1.2(Armouring: Coverage )	-	300	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
13.3(Armouring : Dimensions -Formed wire )	-	100	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
13.5.2(ARMOURING : Resistance)	-	100	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
13.6 a)(ARMOURING: Tensile Strength)	-	100	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	100	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	100	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	100	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
13.6 f)(ARMOURING: Mass of zinc coating )	-	100	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
13.6 g)(ARMOURING: Resistivity)	-	100	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
14.4.1(Thickness of Outer Sheath : Unarmowed Cables)	-	50	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
14.4.2(Thickness of Outer Sheath : Armoured Cables)	-	50	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
15.1 a) 1)(Tests on conductor : Annealing test ( for copper ))	-	150	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
15.1 a) 2)(Tensile test (for aluminium) - Before stranding )	-	150	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
15.1 a) 2)(Tensile test (for aluminium) - After stranding )	-	150	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
15.1 d)1)(Phyaical tests for insulation : Tensile Test)	-	250	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
15.1 d)1)(Phyaical tests for insulation : Elongation )	-	250	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
15.1 d)1)(Physical tests for sheath : Elongation )	-	250	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
15.1 d)2)(Phyaical tests for insulation- Ageing in air Oven : Tensile Test)	-	250	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
15.1 d)2)(Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	400	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	400	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
15.1 d)3)(Phyaical tests for insulation : Shrinkage )	-	50	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
15.1 d)3)(Phyaical tests for insulation : Shrinkage - Crack observed )	-	50	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
15.1 d)3)(Phyaical tests for Sheath : Shrinkage )	-	50	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
15.1 d)3)(Phyaical tests for Sheath : Shrinkage - Crack observed )	-	50	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
15.1 d)4)(Hot deformation : Insulation )	-	200	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
15.1 d)4)(Hot deformation : Sheath )	-	100	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
15.1 d)5)( Loss of mass in air oven- Insulation )	-	400	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
15.1 d)5)( Loss of mass in air oven- sheath )	-	400	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
15.1 d)6)(Heat shock test- Insulation )	-	50	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
15.1 d)6)(Heat shock test- sheath )	-	50	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
15.1 d)7)(Thermal stability- insulation )	-	50	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
15.1 e)(Insulation resistance test : Volume Resistivity )	-	200	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
15.1 e)(Insulation resistance test : IR Constant )	-	200	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
15.1 f)(High voltage test ( water immersion test ))	-	250	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
15.1 g)(High voltage test at room temperature)	-	250	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
15.4 a)(Cold bend test- Insulation ( Optional test))	-	100	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
15.4 a)(Cold bend test- Sheath ( Optional test))	-	100	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
15.4 b)(Cold impact test- Insulation ( Optional test))	-	100	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
15.4 b)(Cold impact test- Sheath ( Optional test))	-	100	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
16.4(Flammability Test)	-	100	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
3.1(MATERIALS : CONDUCTOR)	-	10	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
4.1.1(INSULATION : General Purjose Insulaiion)	-	10	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
4.1.2(INSULATION : Heat Resisting Insulation)	-	10	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
5.1(MATERIALS : FILLER AND INNER SHEATH)	-	10	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
5.2(MATERIALS : FILLER AND INNER SHEATH)	-	10	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
6.1(MATERIALS : ARMGURING)	-	10	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
6.2(MATERIALS : ARMGURING)	-	10	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
7.1.1(OUTER SHEATH : For Cables with General Purpose InsuIafion)	-	10	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
7.1.2(OUTER SHEATH : For Cables with Heat Resisting InsuIalion)	-	10	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
8.2(CONSTRUCTION : CONDUCTOR)	-	10	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
9.1(INSULATION )	-	10	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
9.3(INSULATION :Tolerance on Thickness of Insulation)	-	10	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
9.4(INSULATION : Application of Insulation)	-	10	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
10.1(CORE IDENTIFICATION)	-	10	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
10.2(CORE IDENTIFICATION)	-	10	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
10.3(CORE IDENTIFICATION)	-	10	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
10.3.1(Arrangement of Marking)	-	10	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
11.2(LAYING UP OF CORES)	-	10	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
12.1(INNER SHEATH)	-	10	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
12.2(INNER SHEATH)	-	10	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
12.3.1(INNER SHEATH :Thickness of Inner Sheath)	-	100	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
13.1.1(ARMOURING : Application)	-	10	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
13.1.3(ARMOURING : Direction of lay )	-	10	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
13.1.4(ARMOURING : Application)	-	10	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
13.2(ARMOURING : Type of Armour)	-	10	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
13.2.1(ARMOURING : Type of Armour)	-	10	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
13.3(Armouring : Dimensions -Wire Diameter)	-	100	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
13.4(ARMOURING : Joints)	-	10	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
13.5.1(ARMOURING : Resistance)	-	10	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
13.6 b)(ARMOURING: Elongation )	-	100	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
14.1(OUTER SHEATH)	-	10	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
14.2(OUTER SHEATH)	-	10	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
14.3(OUTER SHEATH : Colour )	-	10	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
15.1 a) 3)(Tests on conductor : Wrapping test ( for aluminium ))	-	100	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
15.1 a) 4)(Tests on conductor : Conductor resistance test)	-	100	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
15.1 a) 4)(Resistance test - Neutral conductor )	-	100	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
15.1 d)1)(Physical tests for sheath : Tensile stregth )	-	100	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
15.1 d)2)(Phyaical tests for insulation - Ageing in air oven : Elongation )	-	400	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
15.1 d)2)(Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	400	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	400	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation )	-	400	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	400	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
15.1 d)7)(Thermal stability- Sheath )	-	100	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
15.1 g)(High voltage test at room temperature)	-	220	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
15.4 c)(Armour resistance test ( for other than mining cables ).- Optional test )	-	10	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
16.1(DETAILS OF TESTS : General)	-	10	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
16.2(DETAILS OF TESTS : High Voltage Test at Room Temperature)	-	0	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
16.3.1(High Voltage Test ( Water Immersion Test ) : a.c. Test)	-	500	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
16.3.2(High Voltage Test ( Water Immersion Test ) : d.c. Test)	-	850	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
16.5(Oxygen Index Test)	-	1500	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
16.6(Flame Retardance Test on Single Cables)	-	2000	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
16.7(Flame Retardance Test on Bunched Cables)	-	3500	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
16.9(Test for Halogen Acid Gas Evolution)	-	1000	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
16.1(Temperature Index)	-	2000	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
17.1(IDENTIFICATION : Manufacturer’s Identification)	-	10	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
17.2(IDENTIFICATION : Cable Identification)	-	10	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
17.2.1(IDENTIFICATION : Cable Identification)	-	10	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
17.3(IDENTIFICATION : Cable Code)	-	10	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
15.1.e(Insulation resistance Test- Insulation resistance At Maximum rated temperature temperature)	-	200	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
15.1.e(Insulation resistance Test- Insulation resistance constant At Room temperature)	-	200	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
15.1.e(Insulation resistance Test- Volume Resistivity At Maximum rated temperature temperature)	-	200	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
15.1.e(Insulation resistance Test- Volume Resistivity At Room temperature)	-	200	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
16.4(Flammability Test- Un affected portion)	-	50	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
16.4(Flammability Test- Period of Burning)	-	50	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
9.3(Minimum Thickness of Reduce core insulation)	-	50	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
9.2(Thickness of Reduce core insulation)	-	50	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.
3.1 Table 2 IS 8130(Number of wires in the conductor)	-	10	Rs.6000/- for single core cable and Rs.1000/- for each additional core, Rs.1000/- for armouring, Rs.9000/- additional for FR and Rs.12000/- additional for FRLSH.

-
(C-1 & C-2 category included w.e.f. 23.02.2024)

IS 16046 : Part 2 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 2 Lithium Systems ( Second Revision )

70000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(General)	-	1000	Nil
5.2(Insulation and Wiring)	-	3000	Nil
6(Type Test and Sample Size)	-	4000	Nil
7.1(Charging procedure for test purposes)	-	7000	Nil
7.2(Intended Use)	-	8000	Nil
7.3(Reasonably foreseeable misuse)	-	11000	Nil
8.2(Small Cell and battery safety information)	-	2000	Nil
4(Parameter Measurement Tolerances)	-	2000	Nil
5(General Safety Considerations)	-	2000	Nil
5.3(Venting)	-	2000	Nil
5.4(Temperature, Voltage and Current Management)	-	2000	Nil
5.5(Terminal Contacts)	-	2000	Nil
5.6(Assembly of Cells into batteries)	-	2000	Nil
5.7(Quality Plan)	-	2000	Nil
5.8(Battery Safety Components)	-	2000	Nil
7(Specific requirements and tests)	-	2000	Nil
8(Information for safety)	-	2000	Nil
8.1(General)	-	2000	Nil
9(Marking)	-	2000	Nil
9.1(Cell Marking)	-	2000	Nil
9.2(Battery Marking)	-	2000	Nil
9.3(Caution for ingestion of small cells and batteries)	-	2000	Nil
9.4(Other information)	-	2000	Nil
10(Packaging)	-	2000	Nil

-
REVISED VERSION Included w.e.f. 28.11.2018. Exclusion : Clause 7.3.1 of IS 16047: Part 3

IS 16046 : Part 1 (2018)

80000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2(Insulation and Wiring)	-	2000	NIL
6(Tyoe Test amd Sample Size)	-	1500	Nil
7.1(Charging procedure for test purposes)	-	10500	Nil
7.2(Intended Use)	-	11000	Nil
7.3(Reasonably foreseeable misuse)	-	11000	Nil
8.2(Small Cell and battery safety information)	-	10000	Nil
4(Parameter Measurement Tolerances)	-	1000	Nil
5(General Safety Considerations)	-	2000	Nil
5.1(General)	-	2000	Nil
5.3(Venting)	-	2000	Nil
5.4(Temperature, Voltage and Current Management)	-	2000	Nil
5.5(Terminal Contacts)	-	2000	Nil
5.6(Assembly of Cells into batteries)	-	2000	Nil
5.7(Quality Plan)	-	2000	Nil
8(Information for safety)	-	2000	Nil
8.1(General)	-	2000	Nil
9(Marking)	-	2000	Nil
9.1(Cell Marking)	-	2000	Nil
9.2(Battery Marking)	-	2000	Nil
9.3(Caution for ingestion of small cells and batteries)	-	2000	Nil
9.4(Other information)	-	2000	Nil
10(Packaging)	-	2000	Nil
7(Specific requirements and tests)	-	3000	Nil

-
REVISED VERSION Included w.e.f. 28.11.2018.

IS 10322 : Part 5 : Sec 8 (2013)

Luminaires: Part 5 particular requirements: Sec 8 emergency lighting

75000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Marking)	-	2000	n/a
7.0(Construction)	-	7000	n/a
8.0(Creepage Distance and Clearances)	-	4000	n/a
9.0(Provision for earthing)	-	2000	n/a
10.0(Terminals)	-	5000	n/a
11.0(External & Internal Wiring)	-	4000	n/a
12.0(Protection against electric shock)	-	8000	n/a
13.0(Endurance Tests and Thermal Tests)	-	8000	n/a
14.0(Resistance to Dust & Moisture)	-	6000	n/a
15.0(Insulation Resistance and Electric Strength)	-	2000	n/a
16.0(Resistance to Heat , fire and tracking)	-	4000	n/a
17.0(Functional Safety)	-	3000	n/a
18.0(Changeover Operation)	-	4000	n/a
19.0(High Temperature Operation)	-	4000	n/a
20.0(BATTERY CHARGERS FOR SELFCONTAINED EMERGENCY LUMINAIRES)	-	4000	n/a
21.0(TEST DEVICES FOR EMERGENCY OPERATION)	-	4000	n/a
22.0(REST MODE AND INIHIBITION MODE FACILITIES)	-	2000	n/a
4(General Test Requireements)	-	1000	n/a
5(Classification of Luminaires')	-	1000	n/a

-
Included w.e.f. 28.11.2018.

IS 10322 : Part 5 : Sec 7 (2017)

Luminaires: Part 5 particular requirements: Sec 7 lighting chains (First Revision)

75000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
20.6(Marking)	-	2000	n/a
20.7(Construction)	-	10000	n/a
20.8(Creepage Distance and Clearances)	-	8000	n/a
20.10(Terminals)	-	10000	n/a
20.11(External & Internal Wiring)	-	8000	n/a
20.12(Protection against electric shock)	-	8000	n/a
20.13(Endurance Tests and Thermal Tests)	-	10000	n/a
20.14(Resistance to Dust & Moisture)	-	8000	n/a
20.15(Insulation Resistance and Electric Strength)	-	5000	n/a
20.16(Resistance to Heat , fire and tracking)	-	4000	n/a
20.4(General Test Requireements)	-	1000	n/a
20.5(Classification of Luminaires')	-	1000	n/a

-
REVISED VERSION OF 2017 INCLUDED w.e.f. 17.04.2018

IS 10322 : Part 5 : Sec 6 (2013)

Luminaires: Part 5 particular requirements: Sec 6 handlamps

75000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Marking)	-	2000	n/a
7.0(Construction)	-	10000	n/a
8.0(Creepage Distance and Clearances)	-	8000	n/a
9.0(Provision for earthing)	-	6000	n/a
10.0(Terminals)	-	8000	n/a
11.0(External & Internal Wiring)	-	6000	n/a
12.0(Protection against electric shock)	-	8000	n/a
13.0(Endurance Tests and Thermal Tests)	-	10000	n/a
14.0(Resistance to Dust & Moisture)	-	8000	n/a
15.0(Insulation Resistance and Electric Strength)	-	3000	n/a
16.0(Resistance to Heat , fire and tracking)	-	4000	n/a
4(General Test Requireements)	-	1000	n/a
5(Classification of Luminaires')	-	500	n/a
8.2(Packing -Each Package shall bear the following Particulars)	-	500	n/a

-
-

IS 10322 : Part 5 : Sec 5 (2013)

Luminaires: Part 5 particular requirements: Sec 5 floodlights (First Revision)

75000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Marking)	-	2000	n/a
7.0(Construction)	-	8000	n/a
8.0(Creepage Distance and Clearances)	-	5000	n/a
9.0(Provision for earthing)	-	5000	n/a
10.0(Terminals)	-	5000	n/a
11.0(External & Internal Wiring)	-	5000	n/a
12.0(Protection against electric shock)	-	5000	n/a
13.0(Endurance Tests and Thermal Tests)	-	8000	n/a
14.0(Resistance to Dust & Moisture)	-	8000	n/a
15.0(Insulation Resistance and Electric Strength)	-	5000	n/a
16.0(Resistance to Heat , fire and tracking)	-	5000	n/a
17.0(Photometric Test)	-	12000	n/a
4(General Test Requireements)	-	1000	n/a
5(Classification of Luminaires')	-	1000	n/a

-
For rated voltage up to 300V.

IS 10322 : PART 5 : SEC 3 (2012)

Luminaires: Part 5 particular requirements: Sec 3 luminaires for road and street lighting (First Revision)

75000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Marking)	-	2000	n/a
7.0(Construction)	-	8000	n/a
8.0(Creepage Distance and Clearances)	-	5000	n/a
9.0(Provision for earthing)	-	5000	n/a
10.0(Terminals)	-	5000	n/a
11.0(External & Internal Wiring)	-	5000	n/a
12.0(Protection against electric shock)	-	5000	n/a
13.0(Endurance Tests and Thermal Tests)	-	8000	n/a
14.0(Resistance to Dust & Moisture)	-	8000	n/a
15.0(Insulation Resistance and Electric Strength)	-	5000	n/a
16.0(Resistance to Heat , fire and tracking)	-	5000	n/a
17.0(Photometric Test)	-	12000	n/a
4(General Test Requireements)	-	1000	n/a
5(Classification of Luminaires')	-	1000	n/a

-
For rated voltage up to 300V.

IS 694 (2010)

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision)

1100V

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.2(Legibility)	-	10	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
11.1(Durability)	-	10	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
10.9(Additional ageing test (OU cables only) -HV test (at 60±3oC))	-	1250	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
10.4(Flammability test- Unaffected portion)	-	100	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
table 1 e) 3) (IR constant- max. Temp)	-	250	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
10.2(HV (room temperature))	-	300	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
10.1(HV (water immersion))	-	600	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
10.8(Smoke density rating)	-	3000	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
10.6(Halogen evolution)	-	2000	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
10.7(Temperature index)	-	2500	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
10.5(Oxygen index)	-	2500	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
Table 1 iii) d) 9)(Cold impact for sheath)	-	100	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
Table 1 iii) d) 8)(Cold bend for sheath)	-	100	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
Table 1 iii) c) 9)(Cold impact for insulation)	-	100	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
Table 1 iii) c) 8)(Cold bend for insulation)	-	100	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
Table 1 iii) d) 7)(Thermal stability- Sheath )	-	125	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
Table 1 iii) c) 7)(Thermal stability- Insulation )	-	125	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
Table 1 iii) d) 6)(Hot deformation -Indentation depth - Sheath )	-	140	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
Table 1 iii) c) 6)(Hot deformation - Indentation depth- Insulation)	-	140	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
Table 1 iii) d) 5)(Heat shock-Sheath )	-	100	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
Table 1 iii) c) 5)(Heat shock-Insulation )	-	100	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
Table 1 iii) c) 4)(Shrinkage-Insulation)	-	100	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
Table 1 iii) d) 2)(Loss of mass- Sheath )	-	400	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
Table 1 iii) c) 2)(Loss of mass- Insulation )	-	400	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
Table 1 iii) d) 3)(Sheath- Elongation variation)	-	300	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
Table 1 iii) d) 3)(Sheath- TS variation)	-	300	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
Table 1 iii) d) 3)(Sheath- Elongation (After ageing))	-	300	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
Table 1 iii) d) 3)(Sheath- Tensile strength (After ageing))	-	300	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
Table 1 iii) d) 1)(Sheath- Elongation (Without ageing))	-	300	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
Table 1 iii) d) 1)(Sheath -Tensile strength (Without ageing))	-	100	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
8.3(Thickness of Sheath)	-	50	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
5.3(Thickness of Insulation)	-	50	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
9.1(Ovality)	-	50	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
9(Overall dimensions)	-	50	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
10.11(Per sulphate test (for tinned Cu cable only))	-	350	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
4.2(Conductor resistance test)	-	250	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
4.1(Wrapping test (for Al))	-	50	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
4.1(Tensile test (for Al)- After Stranding)	-	50	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
4.1(Tensile test (for Al)-Before Stranding)	-	50	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
4.1(Annealing test (for copper))	-	100	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
(Cl.16.1) (Cl.19.1)(Conductor- Diameter )	-	50	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
4.1(Conductor - Material)	-	10	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
13(Cable code)	-	10	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
11(Identification)	-	10	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
10.4(Flammability test-Burning after flame removal)	-	100	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
table 1 e) 3) (IR constant- Room temp )	-	250	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
table 1 e) 3) (Volume Resistivity - Maximum temp)	-	250	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
table 1 e) 3) (Volume Resistivity - Room temp )	-	250	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
10.1(HV (water immersion))	-	300	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
Table 1(Category Code)	-	10	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
Table 1 iii) d) 4)(Cracks Observed)	-	20	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
Table 1 iii) d) 4)(Shrinkage- Sheath )	-	100	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
Table 1 iii) c) 4)(Cracks Observed)	-	50	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
Table 1 iii) c) 3)(Elongation (After ageing))	-	300	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
Table 1 iii) c) 3)(Tensile strength (After ageing))	-	300	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
Table 1 iii) c) 3)(Elongation variation)	-	300	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
Table 1 iii) c) 3)(TS variation)	-	300	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
Table 1 iii) c) 1)(Elongation (Without ageing))	-	300	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
Table 1 iii) c) 1)(Tensile strength (Without ageing))	-	100	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
(Cl. 18.1.4) (Cl. 19.1.5) (Cl. 20.1.4) (Cl. 22.1.4)(Colour of Sheath)	-	10	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
5.2(Application )	-	10	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
(Cl.6.1.3 of IS 8130:2013)(Flexible Conductors (Classes 5))	-	10	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
(Cl.6.1.3 of IS 8130:2013)( Flexible Conductors (Classes 5))	-	10	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors(Class-2))	-	10	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
(Cl.6.1.3 of IS 8130:2013)(Stranded compacted circular conductors and shaped conductors (Class 2))	-	10	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors (Class-2))	-	10	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors (Class-2))	-	10	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
(Cl.6.1.3 of IS 8130:2013)(Solid Conductor (Class 1))	-	10	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
(Cl.6.1 of IS 8130:2013)(Solid Conductor (Class 1))	-	10	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
(Cl.6.1 of IS 8130:2013)(Solid Conductor (Class 1))	-	10	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
(Cl.16.1) (Cl.19.1)(Conductor)	-	10	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
(Cl.16.1) (Cl.19.1)(Conductor)	-	10	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
(Cl.16.1) (Cl.19.1)(Conductor)	-	10	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
(Cl. 18.1.3) (Cl. 19.1.4) (Cl. 20.1.3) (Cl. 21.1.3) (Cl. 22.1.3)(Assembly of cores )	-	20	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
12(CONSTRUCTION Core Identification)	-	20	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
8.1(Sheath Material )	-	20	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
7(Binder Tape)	-	20	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
6.2(Filler)	-	20	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
6.1(Filler)	-	20	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
5.1(Insulation)	-	20	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
4.4(Joints in Conductor)	-	20	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
4.4(Joints in Conductor)	-	10	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
4.1(Conductor - Material)	-	10	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
10.11(Persulphate Test )	-	200	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
12.0(Core identification)	-	10	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
4, IS 8130(Construction of conductor)	-	10	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
Table 2, IS 8130(No fo wire in a conductor)	-	10	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
8.3(Minimum thickness of Sheath)	-	50	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.
5.3(Avarage thickness of insulation)	-	50	Rs.9000/- for single core cable and Rs.1000/- for each additional core, Rs.5000/- additional for FR and Rs.10000/- additional for FRLSH.

-
-

IS 10322 : Part 5 : Sec 2 (2012)

Luminaires: Part 5 particular requirements: Sec 2 recessed luminaires (First Revision)

75000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Marking)	-	2000	n/a
7(Construction)	-	8000	n/a
8(Creepage Distance and Clearances)	-	5000	n/a
9(Provision for earthing)	-	5000	n/a
10(Terminals)	-	5000	n/a
11(External & Internal Wiring)	-	5000	n/a
12(Protection against electric shock)	-	5000	n/a
13(Endurance Tests and Thermal Tests)	-	8000	n/a
14(Resistance to Dust and Moisture)	-	8000	n/a
15(Insulation Resistance and Electric Strength)	-	5000	n/a
16(Resistance to Heat , fire and tracking)	-	5000	n/a
17(Photometric Test)	-	13000	n/a
4(General Test Requireements)	-	500	n/a
5(Classification of Luminaires')	-	500	n/a

-
For rated voltage up to 300V.

IS 15885 : Part 2 : Sec 13 (2012)

Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	2000	Nil
8(Protection against accidental contact with live parts)	-	4000	Nil
9(Terminals)	-	5000	Nil
10(PROVISION FOR EARTHING)	-	2000	Nil
11(MOISTURE RESISTANCE)	-	6000	Nil
12(Electric Strength)	-	2000	Nil
14(Fault conditions)	-	4000	Nil
15(Transformer heating)	-	5000	Nil
16(Construction)	-	2000	Nil
17(Creepage distance and clearances)	-	2000	Nil
18(Screws, current carrying parts and connections)	-	3000	Nil
19(Resistance to heat, fire and tracking)	-	5000	Nil
20(Resistance to corrosion)	-	2000	Nil
13(Thermal endurance test for winding of ballasts)	-	1000	Nil

-
Excluding: Components: Enclosure, bridging resistor in primary circuit capacitor and RC units, RF suppression (X-Y capacitors)inductor, MOVR/VDRSMPS/Mains transformer, PCB material, Metal base PCB for LED, Transparent cover bobbin, Insulated tape, Heat shrinkage sleeve, Connector, Fuse, internal wire LED, Optocoupler, EMI/EMC filter, Winding wire, Thin sheet material

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

4950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Marking)	-	50	Inspection
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	50	Test
7.1.1(Maximum and minimum outside diameter of socket)	-	50	Test
7.1.1 Table-2(Length of Socket end)	-	50	Test
7.1.2(Maximum and minimum outside diameter of conduit)	-	50	Test
7.2(Minimum inside diameter of conduit)	-	100	Test
7.3(Length of conduit)	-	100	Test
7.4(Unifomity of The wall Thickness)	-	150	Test
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	400	Test
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	500	Test
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	1500	Test
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	300	Test
10(Resistance to Heat -Ball presure test)	-	250	Test
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	250	Test
12(Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	600	Test
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	500	Test
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	0	Test
6.3(Standard Mark on Conduit)	-	0	Test
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	0	Test
12(3 Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	200	Test
12(3 Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	200	Test
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	50	Test
11.0(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	0	Test
10.0(Resistance to Heat -Ball presure test)	-	100	Test
9.5 Fig.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	0	Test
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	0	Test
9.3(Compression Test (after removal of force) as per caluse 9.3.3 of IS: 9537 (Part 1)-1980)	-	0	Test
9.3(Compression Test at Full force applied (On load))	-	0	Test
9.2(Bending Test At Low Temp (-5 ±2°C))	-	0	Test
9.2(Bending Test At Room Temp)	-	0	Test
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	0	Test
7.4(Unifomity of The wall Thickness)	-	0	Test
7.3(Length of conduit)	-	0	Test
7.2 Fig.3(Minimum inside diameter of conduit)	-	0	Test
7.1.2 Fig.2(Minimum outside diameter of conduit)	-	0	Test
7.1.2 Fig.1(Maximum outside diameter of conduit)	-	0	Test
7.1.1 Table-2(Length of Socket end)	-	0	Test
7.1.1 Fig.8(Maximum inside diameter of socket)	-	0	Test
7.1.1 Fig.7(Maximum outside diameter of socket)	-	0	Test
6.3(Standard Mark on Conduit)	-	0	Test
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	0	Test
6.1 - d(Marking)	-	0	Test
6.1 - c(Marking)	-	0	Test
6.1 - b(Marking)	-	0	Test
6.1 - a(Marking)	-	0	Test

-
-

IS 16102 : Part 1 (2012)

Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

45000 View breakup
Rs. 45,000/- for Self-Ballasted LED Lamps for General lighting services: Safety Requirements. [5% discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	2000	n/a
6(Interchangeability)	-	8000	n/a
7(Protection against accidental contact with live parts)	-	5000	n/a
8(Insulation Resistance and Electric Strength)	-	5000	n/a
9(MECHANICAL STRENGTH)	-	4000	n/a
10(cap temperature)	-	5000	n/a
11(Resistance to Heat)	-	4000	n/a
12(Resistance to Flame and Ignition)	-	5000	n/a
13(Fault conditions)	-	5000	n/a
14(Creepage distance and clearances)	-	2000	n/a

-
Restricted to cap type B22d, E14 and E27 only.

IS 302 : Part 2 : Sec 203 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 203 electric call bells and buzzers for indoor use

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Rating)	-	50	-
6(Classification)	-	50	-
7(Marking)	-	500	-
8(Protection against Access to Live Parts)	-	500	-
9(Starting Of Motor Operated Appliances)	-	0	-
10("Power Input & Current")	-	1000	-
11(Temperature Rise/ Heating)	-	1300	-
12(Operation Under Overload Conditions of Appliances with heating Element)	-	0	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	1500	-
14("Radio and Television Interference Suppression / Transient Over Voltage ")	-	1000	-
15(Moisture Resistance)	-	1300	-
16(Leakage Current and Electric Strength/ Insulation Resistance and Electric Strength (After Humidity treatment))	-	2000	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	0	-
18(Endurance)	-	0	-
19(Abnormal Operation)	-	0	-
20(Stability & Mechanical Hazards)	-	0	-
21(Mechanical strength)	-	1000	-
22(Construction)	-	1000	-
23(Internal Wiring)	-	1000	-
24(Components)	-	1000	-
25(Supply Connection & External Flexible Cords)	-	1000	-
26(Terminals For External Conductors)	-	1000	-
27(Provision For Earthing)	-	1000	-
28(Screws & Connections)	-	1000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	1000	-
30(Resistance to Heat & Fire)	-	1800	-
31(Resistance to Rusting)	-	1000	-
32(Radiation hazards)	-	1000	-

-
Included .w.e.f.11.02.2025 Exclusion Cl 24.1.1, 24.1.2 & 24.1.5 (Components) Cl 19.11.4.1 to 19.11.4.7 (EMI/EMC)

IS 302 : Part 2 : Sec 2 (1997)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 2 vacuum cleaners and water suction cleaning appliances

27000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Rating)	-	50	-
6(Classification)	-	50	-
7(Marking)	-	1000	-
8(Protection against Access to Live Parts)	-	1000	-
9(Starting Of Motor Operated Appliances)	-	500	-
10("Power Input & Current")	-	1000	-
11(Temperature Rise/ Heating)	-	1800	-
12(OPERATION UNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS)	-	0	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	1500	-
14(RADIO AND TELEVISION INTERFERENCE SUPPRESSION)	-	1000	-
15(MOISTURE RESISTANCE)	-	1800	-
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( AFTER HUMIDITY TREATMENT ))	-	1500	-
17(OVERLOAD PROTECTION)	-	1000	-
19(ABNORMAL OPERATION)	-	1500	-
20(STABILITY AND MECHANICAL HAZARDS)	-	1000	-
21(MECHANICAL STRENGTH)	-	1000	-
22(Construction)	-	1000	-
23(INTERNAL WIRING)	-	1000	-
24(COMPONENTS)	-	1000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	1000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1000	-
27(PROVISION FOR EARTHING)	-	1000	-
28(SCREWS AND CONNECTIONS)	-	1000	-
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	1000	-
30(RESISTANCE TO HEAT, FIRE AND TRACKING)	-	1800	-
31(RESISTANCE TO RUSTING)	-	1000	-
32(RADIATION HAZARDS)	-	1000	-

-
Included w.e.f. 24.12.2024. Excluding Cl 19.11.4.1 to 19.11.4.7 (EMI/EMC Tests), Cl 24.1.1, 24.1.2 & 24.1.5 (Components).

IS 16333 : Part 3 (2022)

Mobile phone handsets: Part 3 Indian language support for mobile phone handsets - Specific requirements(Second Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Inputting of text)	-	9000	-
5.2(Message Readability)	-	9000	-
6(Marking)	-	2000	-
"Cl.6.1 "(Marking)	-	2000	-
"Cl.6.2 "(BIS Certification Marking)	-	1000	-
4(Requirements)	-	0	-
5(Tests)	-	18000	-
6(Marking)	-	2000	-

-
Included w.e.f 19.08.2024

IS 16169 (2014)

Utility - Interconnected photovoltaic inverters - Test procedure of islanding prevention measures

157000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7, (Elec)(Documentation)	-	3000	-
6 to 6.2, (Elec)(Test for single or multi-phase inverter to Pass/fail criteria)	-	5000	-
Annex A, (Elec)(Islanding as it applies to PV systems)	-	1000	-
Annex B, (Elec)(Test for independent islanding device)	-	1000	-
6, (Elec)(Test for single or multi-phase inverter)	-	145000	-
7(Documentation)	-	3000	-
6 to 6.2(Test for single or multi-phase inverter to Pass/fail criteria)	-	5000	-
Annex A(Islanding as it applies to PV systems)	-	1000	-
Annex B(Test for independent islanding device)	-	1000	-
6(Test for single or multi-phase inverter)	-	145000	-

-
Included w.e.f 16.07.2024

IS 16614 : Part 2 (2022)

Double-Capped LED Linear Lamps Part 2 Performance Specification

195000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Requirements on Tests)	-	1000	-
5(Marking)	-	3000	-
6(Dimensions)	-	4000	-
7.1(General Test Conditions)	-	1000	-
7.2(Creation of LED Lamp Families to reduce test effort)	-	1000	-
8.1(Lamp Power)	-	3000	-
8.2(Power Factor)	-	1000	-
8.3(Harmonics)	-	4000	-
9.1(Luminous Flux)	-	5000	-
9.2(Luminous intensity distribution, peak intensity and beam angle)	-	5000	-
9.3(Luminous Efficacy)	-	5000	-
10(COLORIMETRIC CHARACTERISTICS)	-	5000	-
11(Lamp Life)	-	155000	-
12(Dimming)	-	0	-
14.1(Type Tests)	-	1000	-
14.2(Acceptance Tests)	-	1000	-
4(General Requirements on Tests)	-	1000	-
5(Marking)	-	3000	-
6(Dimensions)	-	4000	-
7.1(General Test Conditions)	-	1000	-
7.2(Creation of LED Lamp Families to reduce test effort)	-	1000	-
8.1(Lamp Power)	-	3000	-
8.2(Power Factor)	-	1000	-
8.3(Harmonics)	-	4000	-
9.1(Luminous Flux)	-	5000	-
9.2(Luminous intensity distribution, peak intensity and beam angle)	-	5000	-
9.3(Luminous Efficacy)	-	5000	-
10(COLORIMETRIC CHARACTERISTICS)	-	5000	-
11(Lamp Life)	-	155000	-
12(Dimming)	-	0	-
14.1(Type Tests)	-	1000	-
14.2(Acceptance Tests)	-	1000	-

-
Included w.e.f. 10.07.2024 Exclusion: Cl.8.4 (Emission of Radio Frequency Disturbances)

IS 11037 (2019)

Electronic Type Fan Regulators — Specification ( First Revision )

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.1 (a)(Marking )	-	83	-
9.1 (b)(Marking )	-	83	-
9.1 (c)(Marking )	-	83	-
9.1 (d)(Marking )	-	83	-
9.1 (e)(Marking )	-	83	-
9.1 (f)(Marking )	-	83	-
9.2(Marking )	-	500	-
6.1(Design and General Construction)	-	200	-
6.2(Design and General Construction)	-	200	-
6.3(Design and General Construction)	-	200	-
6.5(Design and General Construction)	-	200	-
6.6(Design and General Construction)	-	200	-
9.5.1 , 7.3(Temperature Rise)	-	1500	-
9.5.1 , 7.3 (a)(Temperature Rise )	-	750	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	750	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	750	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	750	-
9.5.2, 7.2(Leakage Current Test(as per Cl.13.2 of IS 302 (Part 1).)	-	1000	-
9.5.3(High Voltage Test)	-	1500	-
9.5.5(Earthing Connection)	-	1000	-
9.5.6(Protection against electric shock (as per Cl.8 of IS 302 (Part 1))	-	1000	-
7.6(General and safety requirements)	-	1000	-
7.7(Voltage drop)	-	1000	-
8.1(Performance)	-	300	-
8.2(Performance)	-	300	-
8.3(Performance)	-	300	-
9.5.7, 9.5.4(Moisture Resistance )	-	2500	-
7.4.1(a)(Mechanical strength )	-	500	-
7.4.1(b)(Mechanical strength )	-	500	-
9.5.8, (Mechanical strength (as per Cl.21.1 of IS 302-1:2008))	-	1500	-
9.5.9, 7.5, Table-1(Creepage Distances and Clearances (as per Cl. 29 of IS 302-1))	-	1000	-
9.5.9, 7.5, Table-1(Creepage Distances and Clearances (as per Cl. 29 of IS 302-1))	-	1000	-
9.5.10( Electrical Endurance Test)	-	3000	-
9.5.11.2(Environmental Tests)	-	5000	-
9.5.11.3(Environmental Tests)	-	3000	-
9.5.11.4(Environmental Tests)	-	4000	-
9.5.12(Resistance to Abnormal Heat and to Fire)	-	750	-
9.5.12.1(Resistance to Abnormal Heat and to Fire)	-	750	-
9.5.13(Resistance to Rusting )	-	1500	-
9.5.14(Checking of Dimensions)	-	1500	-
9.1(Marking )	-	500	-
9.1 (a)(Marking )	-	83	-
9.1 (b)(Marking )	-	83	-
9.1 (c)(Marking )	-	83	-
9.1 (d)(Marking )	-	83	-
9.1 (e)(Marking )	-	83	-
9.1 (f)(Marking )	-	83	-
9.2(Marking )	-	83	-
6.1(Design and General Construction)	-	200	-
6.2(Design and General Construction)	-	200	-
6.3(Design and General Construction)	-	200	-
6.5(Design and General Construction)	-	200	-
6.6(Design and General Construction)	-	200	-
9.5.1 , 7.3(Temperature Rise)	-	1500	-
9.5.1 , 7.3 (a)(Temperature Rise )	-	750	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	750	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	750	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	750	-
9.5.2, 7.2(Leakage Current Test(as per Cl.13.2 of IS 302 (Part 1).)	-	1000	-
9.5.3(High Voltage Test)	-	1000	-
9.5.5(Earthing Connection)	-	1000	-
9.5.6(Protection against electric shock (as per Cl.8 of IS 302 (Part 1))	-	1000	-
7.6(General and safety requirements)	-	1000	-
7.7(Voltage drop)	-	0	-
8.1(Performance)	-	300	-
8.2(Performance)	-	300	-
8.3(Performance)	-	300	-
9.5.7, 9.5.4(Moisture Resistance )	-	2500	-
7.4.1(Mechanical strength )	-	1000	-
7.4.1(a)(Mechanical strength )	-	500	-
7.4.1(b)(Mechanical strength )	-	500	-
9.5.8, (Mechanical strength (as per Cl.21.1 of IS 302-1:2008))	-	1500	-
9.5.9, 7.5, Table-1(Creepage Distances and Clearances (as per Cl. 29 of IS 302-1))	-	1000	-
9.5.9, 7.5, Table-1(Creepage Distances and Clearances (as per Cl. 29 of IS 302-1))	-	1000	-
9.5.10( Electrical Endurance Test)	-	3000	-
9.5.11.2(Environmental Tests)	-	3000	-
9.5.11.3(Environmental Tests)	-	3000	-
9.5.11.4(Environmental Tests)	-	4000	-
9.5.12(Resistance to Abnormal Heat and to Fire)	-	750	-
9.5.12.1(Resistance to Abnormal Heat and to Fire)	-	750	-
9.5.13(Resistance to Rusting )	-	1500	-
9.5.14(Checking of Dimensions)	-	1500	-

-
-

IS 1258 (2005)

Bayonet lamp holders (Fourth Revision)

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1(Marking )	-	60	-
8.2(Marking )	-	60	-
8.3(Marking )	-	60	-
8.4(Marking )	-	60	-
8.5(Marking )	-	60	-
8.6(Marking )	-	50	-
8.7(Marking )	-	50	-
8.8(Marking )	-	60	-
6(Rating )	-	400	-
6(Rating )	-	400	-
7(Classification)	-	400	-
7.2(Classification)	-	100	-
7.3(Classification)	-	100	-
7.4(Classification)	-	100	-
7.5(Classification)	-	100	-
7.6(Classification)	-	100	-
9.1(Dimensions)	-	500	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.2(Dimensions)	-	150	-
9.3(Dimensions)	-	150	-
9.3(Dimensions)	-	150	-
9.3(Dimensions)	-	150	-
9.3(Dimensions)	-	150	-
9.3(Dimensions)	-	150	-
9.3(Dimensions)	-	150	-
9.3(Dimensions)	-	150	-
10(Protection against electric shock )	-	1000	-
11.1(Terminals)	-	125	-
11.2(Terminals)	-	125	-
11.3(Terminals)	-	125	-
11.3(Terminals)	-	125	-
11.3(Terminals)	-	125	-
11.3(Terminals)	-	125	-
11.3(Terminals)	-	125	-
11.3(Terminals)	-	125	-
11.4(Terminals)	-	125	-
12(Provision for Earthing)	-	1000	-
13.1(Construction)	-	110	-
13.1(Construction (Data Sheet No 7005-10))	-	110	-
13.1(Construction (Data Sheet No 7005-10& 7006-15A))	-	110	-
13.2(Construction (Data Sheet No 7005-10& 7006-15A))	-	110	-
13.3(Construction )	-	110	-
13.4(Construction )	-	110	-
13.5(Construction)	-	110	-
13.2 ,13.6 & 13.7 (Construction)	-	110	-
13.2 ,13.6 & 13.8(Construction)	-	110	-
13.11(Construction)	-	110	-
14(Construction)	-	500	-
15.1(Moisture Resistance, Insulation Resistance and Electric Strength)	-	700	-
15.2(Moisture Resistance, Insulation Resistance and Electric Strength)	-	700	-
15.3(Moisture Resistance, Insulation Resistance and Electric Strength)	-	700	-
16.1(Mechanical Strength)	-	500	-
16.1(Mechanical Strength)	-	60	-
16.2(Mechanical Strength)	-	60	-
16.3(Mechanical Strength)	-	60	-
16.4(Mechanical Strength)	-	60	-
16.5(Mechanical Strength)	-	60	-
16.6 & Table - 6(Mechanical Strength)	-	60	-
16.7(Mechanical Strength)	-	60	-
16.8(Mechanical Strength)	-	60	-
17(Screws,current-carrying parts and connections)	-	500	-
18(Creepage distances and Clearances)	-	500	-
18.1, Table 8(Creepage distances and Clearances)	-	500	-
18.1, Table 8(Creepage distances and Clearances)	-	500	-
18.1, Table 8(Creepage distances and Clearances)	-	500	-
18.1, Table 8(Creepage distances and Clearances)	-	500	-
18.1, Table 8(Creepage distances and Clearances)	-	500	-
18.1, Table 8(Creepage distances and Clearances)	-	500	-
18.1, Table 8(Creepage distances and Clearances)	-	500	-
19.1(General resistance to heat)	-	375	-
19.2(General resistance to heat)	-	375	-
19.3(General resistance to heat)	-	375	-
19.4(Resistance to heat test)	-	375	-
20.1(Resistance to heat, fire and tracking)	-	500	-
20.3(Resistance to heat, fire and tracking)	-	500	-
20.4(Resistance to heat, fire and tracking)	-	500	-
20.5(Resistance to tracking)	-	500	-
21.1(Resistance to excessive residual stresses and to rusting)	-	500	-
21.1(Resistance to excessive residual stresses and to rusting)	-	500	-
8.1(Marking )	-	500	-
8.1(Marking )	-	60	-
8.1(Marking )	-	60	-
8.1(Marking )	-	60	-
8.1(Marking )	-	60	-
8.1(Marking )	-	60	-
8.1(Marking )	-	60	-
8.1(Marking )	-	60	-
8.1(Marking )	-	60	-
8.1(Marking )	-	60	-
8.1(Marking )	-	60	-
8.1(Marking )	-	60	-
8.1(Marking )	-	60	-
8.2(Marking )	-	60	-
8.2(Marking )	-	60	-
8.2(Marking )	-	60	-
8.3(Marking )	-	60	-
8.4(Marking )	-	60	-
8.5(Marking )	-	60	-
8.6(Marking )	-	60	-
8.7(Marking )	-	60	-
8.8(Marking )	-	60	-
6(Rating )	-	400	-
6(Rating )	-	400	-
7(Classification)	-	500	-
7.2(Classification)	-	100	-
7.3(Classification)	-	100	-
7.4(Classification)	-	100	-
7.5(Classification)	-	100	-
7.6(Classification)	-	100	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.2(Dimensions)	-	150	-
9.3(Dimensions)	-	150	-
9.3(Dimensions)	-	150	-
9.3(Dimensions)	-	150	-
9.3(Dimensions)	-	150	-
9.3(Dimensions)	-	150	-
9.3(Dimensions)	-	1501	-
10(Protection against electric shock )	-	1000	-
11.1(Terminals)	-	125	-
11.2(Terminals)	-	125	-
11.3(Terminals)	-	125	-
12.3(Terminals)	-	125	-
11.3(Terminals)	-	125	-
11.3(Terminals)	-	125	-
11.3(Terminals)	-	125	-
11.3(Terminals)	-	125	-
11.4(Terminals)	-	125	-
12(Provision for Earthing)	-	125	-
13.1(Construction)	-	110	-
13.1(Construction (Data Sheet No 7005-10))	-	110	-
13.1(Construction (Data Sheet No 7005-10& 7006-15A))	-	110	-
13.2(Construction (Data Sheet No 7005-10& 7006-15A))	-	110	-
13.3(Construction )	-	110	-
13.4(Construction )	-	110	-
13.5(Construction)	-	110	-
13.2 ,13.6 & 13.7 (Construction)	-	110	-
13.2 ,13.6 & 13.8(Construction)	-	110	-
13.11(Construction)	-	110	-
14(Construction)	-	500	-
15.1(Moisture Resistance, Insulation Resistance and Electric Strength)	-	700	-
15.2(Moisture Resistance, Insulation Resistance and Electric Strength)	-	700	-
15.3(Moisture Resistance, Insulation Resistance and Electric Strength)	-	70060	-
16.1(Mechanical Strength)	-	60	-
16.1(Mechanical Strength)	-	60	-
16.2(Mechanical Strength)	-	60	-
16.3(Mechanical Strength)	-	60	-
16.4(Mechanical Strength)	-	60	-
16.5(Mechanical Strength)	-	60	-
16.6 & Table - 6(Mechanical Strength)	-	60	-
16.7(Mechanical Strength)	-	60	-
16.8(Mechanical Strength)	-	60	-
17(Screws,current-carrying parts and connections)	-	500	-
18(Creepage distances and Clearances)	-	500	-
18(Creepage distances and Clearances)	-	500	-
18(Creepage distances and Clearances)	-	500	-
18(Creepage distances and Clearances)	-	500	-
18(Creepage distances and Clearances)	-	500	-
18(Creepage distances and Clearances)	-	500	-
18(Creepage distances and Clearances)	-	500	-
18(Creepage distances and Clearances)	-	500	-
19.1(General resistance to heat)	-	375	-
19.2(General resistance to heat)	-	375	-
19.3(General resistance to heat)	-	375	-
19.4(Resistance to heat test)	-	500	-
20.1(Resistance to heat, fire and tracking)	-	500	-
20.3(Resistance to heat, fire and tracking)	-	500	-
20.4(Resistance to heat, fire and tracking)	-	500	-
20.5(Resistance to tracking)	-	500	-
21.1(Resistance to excessive residual stresses and to rusting)	-	500	-
21.1(Resistance to excessive residual stresses and to rusting)	-	500	-
8.1(Marking )	-	-	-
8.2(Marking )	-	-	-
8.3(Marking )	-	-	-
8.4(Marking )	-	-	-
8.5(Marking )	-	-	-
8.6(Marking )	-	-	-
8.7(Marking )	-	-	-
8.8(Marking )	-	-	-
6(Rating )	-	-	-
6(Rating )	-	-	-
7(Classification)	-	-	-
7.2(Classification)	-	-	-
7.3(Classification)	-	-	-
7.4(Classification)	-	-	-
7.5(Classification)	-	-	-
7.6(Classification)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.2(Dimensions)	-	-	-
9.3(Dimensions)	-	-	-
9.3(Dimensions)	-	-	-
9.3(Dimensions)	-	-	-
9.3(Dimensions)	-	-	-
9.3(Dimensions)	-	-	-
9.3(Dimensions)	-	-	-
9.3(Dimensions)	-	-	-
10(Protection against electric shock )	-	-	-
11.1(Terminals)	-	-	-
11.2(Terminals)	-	-	-
11.3(Terminals)	-	-	-
11.3(Terminals)	-	-	-
11.3(Terminals)	-	-	-
11.3(Terminals)	-	-	-
11.3(Terminals)	-	-	-
11.3(Terminals)	-	-	-
11.4(Terminals)	-	-	-
12(Provision for Earthing)	-	-	-
13.1(Construction)	-	-	-
13.1(Construction (Data Sheet No 7005-10))	-	-	-
13.1(Construction (Data Sheet No 7005-10& 7006-15A))	-	-	-
13.2(Construction (Data Sheet No 7005-10& 7006-15A))	-	-	-
13.3(Construction )	-	-	-
13.4(Construction )	-	-	-
13.5(Construction)	-	-	-
13.2 ,13.6 & 13.7 (Construction)	-	-	-
13.2 ,13.6 & 13.8(Construction)	-	-	-
13.11(Construction)	-	-	-
14(Construction)	-	-	-
15.1(Moisture Resistance, Insulation Resistance and Electric Strength)	-	-	-
15.2(Moisture Resistance, Insulation Resistance and Electric Strength)	-	-	-
15.3(Moisture Resistance, Insulation Resistance and Electric Strength)	-	-	-
16.1(Mechanical Strength)	-	-	-
16.1(Mechanical Strength)	-	-	-
16.2(Mechanical Strength)	-	-	-
16.3(Mechanical Strength)	-	-	-
16.4(Mechanical Strength)	-	-	-
16.5(Mechanical Strength)	-	-	-
16.6 & Table - 6(Mechanical Strength)	-	-	-
16.7(Mechanical Strength)	-	-	-
16.8(Mechanical Strength)	-	-	-
17(Screws,current-carrying parts and connections)	-	-	-
18(Creepage distances and Clearances)	-	-	-
18.1, Table 8(Creepage distances and Clearances)	-	-	-
18.1, Table 8(Creepage distances and Clearances)	-	-	-
18.1, Table 8(Creepage distances and Clearances)	-	-	-
18.1, Table 8(Creepage distances and Clearances)	-	-	-
18.1, Table 8(Creepage distances and Clearances)	-	-	-
18.1, Table 8(Creepage distances and Clearances)	-	-	-
18.1, Table 8(Creepage distances and Clearances)	-	-	-
19.1(General resistance to heat)	-	-	-
19.2(General resistance to heat)	-	-	-
19.3(General resistance to heat)	-	-	-
19.4(Resistance to heat test)	-	-	-
20.1(Resistance to heat, fire and tracking)	-	-	-
20.3(Resistance to heat, fire and tracking)	-	-	-
20.4(Resistance to heat, fire and tracking)	-	-	-
20.5(Resistance to tracking)	-	-	-
21.1(Resistance to excessive residual stresses and to rusting)	-	-	-
21.1(Resistance to excessive residual stresses and to rusting)	-	-	-
8.1(Marking )	-	-	-
8.1(Marking )	-	-	-
8.1(Marking )	-	-	-
8.1(Marking )	-	-	-
8.1(Marking )	-	-	-
8.1(Marking )	-	-	-
8.1(Marking )	-	-	-
8.1(Marking )	-	-	-
8.1(Marking )	-	-	-
8.1(Marking )	-	-	-
8.1(Marking )	-	-	-
8.1(Marking )	-	-	-
8.1(Marking )	-	-	-
8.2(Marking )	-	-	-
8.2(Marking )	-	-	-
8.2(Marking )	-	-	-
8.3(Marking )	-	-	-
8.4(Marking )	-	-	-
8.5(Marking )	-	-	-
8.6(Marking )	-	-	-
8.7(Marking )	-	-	-
8.8(Marking )	-	-	-
6(Rating )	-	-	-
6(Rating )	-	-	-
7(Classification)	-	-	-
7.2(Classification)	-	-	-
7.3(Classification)	-	-	-
7.4(Classification)	-	-	-
7.5(Classification)	-	-	-
7.6(Classification)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.1(Dimensions)	-	-	-
9.2(Dimensions)	-	-	-
9.3(Dimensions)	-	-	-
9.3(Dimensions)	-	-	-
9.3(Dimensions)	-	-	-
9.3(Dimensions)	-	-	-
9.3(Dimensions)	-	-	-
9.3(Dimensions)	-	-	-
10(Protection against electric shock )	-	-	-
11.1(Terminals)	-	-	-
11.2(Terminals)	-	-	-
11.3(Terminals)	-	-	-
12.3(Terminals)	-	-	-
11.3(Terminals)	-	-	-
11.3(Terminals)	-	-	-
11.3(Terminals)	-	-	-
11.3(Terminals)	-	-	-
11.4(Terminals)	-	-	-
12(Provision for Earthing)	-	-	-
13.1(Construction)	-	-	-
13.1(Construction (Data Sheet No 7005-10))	-	-	-
13.1(Construction (Data Sheet No 7005-10& 7006-15A))	-	-	-
13.2(Construction (Data Sheet No 7005-10& 7006-15A))	-	-	-
13.3(Construction )	-	-	-
13.4(Construction )	-	-	-
13.5(Construction)	-	-	-
13.2 ,13.6 & 13.7 (Construction)	-	-	-
13.2 ,13.6 & 13.8(Construction)	-	-	-
13.11(Construction)	-	-	-
14(Construction)	-	-	-
15.1(Moisture Resistance, Insulation Resistance and Electric Strength)	-	-	-
15.2(Moisture Resistance, Insulation Resistance and Electric Strength)	-	-	-
15.3(Moisture Resistance, Insulation Resistance and Electric Strength)	-	-	-
16.1(Mechanical Strength)	-	-	-
16.1(Mechanical Strength)	-	-	-
16.2(Mechanical Strength)	-	-	-
16.3(Mechanical Strength)	-	-	-
16.4(Mechanical Strength)	-	-	-
16.5(Mechanical Strength)	-	-	-
16.6 & Table - 6(Mechanical Strength)	-	-	-
16.7(Mechanical Strength)	-	-	-
16.8(Mechanical Strength)	-	-	-
17(Screws,current-carrying parts and connections)	-	-	-
18(Creepage distances and Clearances)	-	-	-
18(Creepage distances and Clearances)	-	-	-
18(Creepage distances and Clearances)	-	-	-
18(Creepage distances and Clearances)	-	-	-
18(Creepage distances and Clearances)	-	-	-
18(Creepage distances and Clearances)	-	-	-
18(Creepage distances and Clearances)	-	-	-
18(Creepage distances and Clearances)	-	-	-
19.1(General resistance to heat)	-	-	-
19.2(General resistance to heat)	-	-	-
19.3(General resistance to heat)	-	-	-
19.4(Resistance to heat test)	-	-	-
20.1(Resistance to heat, fire and tracking)	-	-	-
20.3(Resistance to heat, fire and tracking)	-	-	-
20.4(Resistance to heat, fire and tracking)	-	-	-
20.5(Resistance to tracking)	-	-	-
21.1(Resistance to excessive residual stresses and to rusting)	-	-	-
21.1(Resistance to excessive residual stresses and to rusting)	-	-	-

-
Included w.e.f. 10.07.2024

IS 15787 (2008)

Switch - Socket - Outlets (Non - Interlock Type)

26550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.30 IS 15787:2008(Additional tests on pins providing with insulating sleeves)	-	0	Rs.22500 (Upto 10A), Rs.26550 (Above 10A)
Cl.29 IS 15787:2008(Resistance to Rusting)	-	1000	Rs.22500 (Upto 10A), Rs.26550 (Above 10A)
Cl.28 IS 15787:2008(Resistance of insulating material to Abnormal Heat , To Fire & To tracking )	-	850	Rs.22500 (Upto 10A), Rs.26550 (Above 10A)
Cl.27 IS 15787:2008(Creepage distance, clearances & Distance through sealing compounds)	-	500	Rs.22500 (Upto 10A), Rs.26550 (Above 10A)
Cl.26 IS 15787:2008(Screws, current carrying parts & connections)	-	500	Rs.22500 (Upto 10A), Rs.26550 (Above 10A)
Cl.25 IS 15787:2008(Resistance to heat )	-	1000	Rs.22500 (Upto 10A), Rs.26550 (Above 10A)
Cl.24 IS 15787:2008(Mechanical strength)	-	1000	Rs.22500 (Upto 10A), Rs.26550 (Above 10A)
Cl.23 IS 15787:2008(Flexible cables & their connections)	-	0	Rs.22500 (Upto 10A), Rs.26550 (Above 10A)
Cl.22 IS 15787:2008(Force necessary to withdraw the plug )	-	1000	Rs.22500 (Upto 10A), Rs.26550 (Above 10A)
Cl.21 IS 15787:2008(Normal operation )	-	3000	Rs.22500 (Upto 10A), Rs.26550 (Above 10A)
Cl.20 IS 15787:2008(Making & Breaking )	-	2000	Rs.22500 (Upto 10A), Rs.26550 (Above 10A)
Cl.19 IS 15787:2008(Temperature rise )	-	1000	Rs.22500 (Upto 10A), Rs.26550 (Above 10A)
Cl.18 IS 15787:2008(Operation of Earthing Contacts)	-	600	Rs.22500 (Upto 10A), Rs.26550 (Above 10A)
Cl.17 IS 15787:2008(Insulation resistance & electric strength )	-	1500	Rs.22500 (Upto 10A), Rs.26550 (Above 10A)
Cl.16 IS 15787:2008(Resistance to ageing,To harmful ingress of water and To Humidity)	-	1500	Rs.22500 (Upto 10A), Rs.26550 (Above 10A)
Cl.15 IS 15787:2008(Interlocked Socket-outlet )	-	0	Rs.22500 (Upto 10A), Rs.26550 (Above 10A)
Cl.14 IS 15787:2008(Construction of Plugs and Portable Socket- Outlet )	-	1000	Rs.22500 (Upto 10A), Rs.26550 (Above 10A)
Cl.13 IS 15787:2008(Construction of fixed socket outlet)	-	1000	Rs.22500 (Upto 10A), Rs.26550 (Above 10A)
Cl.12 IS 15787:2008(Terminals)	-	1500	Rs.22500 (Upto 10A), Rs.26550 (Above 10A)
Cl.11 IS 15787:2008(Provision for earthing )	-	1000	Rs.22500 (Upto 10A), Rs.26550 (Above 10A)
Cl.10 IS 15787:2008(Protection against to electric shock )	-	1000	Rs.22500 (Upto 10A), Rs.26550 (Above 10A)
Cl.9 IS 15787:2008(Checking of dimension)	-	1000	Rs.22500 (Upto 10A), Rs.26550 (Above 10A)
Cl.8 IS 15787:2008(Marking )	-	1000	Rs.22500 (Upto 10A), Rs.26550 (Above 10A)
Cl.7 IS 15787:2008(Classification)	-	800	Rs.22500 (Upto 10A), Rs.26550 (Above 10A)
Cl.6 IS 15787:2008(Ratings )	-	550	Rs.22500 (Upto 10A), Rs.26550 (Above 10A)
Cl.30 IS 15787:2008(Additional tests on pins providing with insulating sleeves)	-	0	-
Cl.29 IS 15787:2008(Resistance to Rusting)	-	0	-
Cl.28 IS 15787:2008(Resistance of insulating material to Abnormal Heat , To Fire & To tracking )	-	0	-
Cl.27 IS 15787:2008(Creepage distance, clearances & Distance through sealing compounds)	-	0	-
Cl.26 IS 15787:2008(Screws, current carrying parts & connections)	-	0	-
Cl.25 IS 15787:2008(Resistance to heat )	-	0	-
Cl.24 IS 15787:2008(Mechanical strength)	-	0	-
Cl.23 IS 15787:2008(Flexible cables & their connections)	-	0	-
Cl.22 IS 15787:2008(Force necessary to withdraw the plug )	-	0	-
Cl.21 IS 15787:2008(Normal operation )	-	0	-
Cl.20 IS 15787:2008(Making & Breaking )	-	0	-
Cl.19 IS 15787:2008(Temperature rise )	-	0	-
Cl.18 IS 15787:2008(Operation of Earthing Contacts)	-	0	-
Cl.17 IS 15787:2008(Insulation resistance & electric strength )	-	0	-
Cl.16 IS 15787:2008(Resistance to ageing,To harmful ingress of water and To Humidity)	-	0	-
Cl.15 IS 15787:2008(Interlocked Socket-outlet )	-	0	-
Cl.14 IS 15787:2008(Construction of Plugs and Portable Socket- Outlet )	-	0	-
Cl.13 IS 15787:2008(Construction of fixed socket outlet)	-	0	-
Cl.12 IS 15787:2008(Terminals)	-	0	-
Cl.11 IS 15787:2008(Provision for earthing )	-	0	-
Cl.10 IS 15787:2008(Protection against to electric shock )	-	0	-
Cl.9 IS 15787:2008(Checking of dimension)	-	0	-
Cl.8 IS 15787:2008(Marking )	-	0	-
Cl.7 IS 15787:2008(Classification)	-	0	-
Cl.6 IS 15787:2008(Ratings )	-	0	-

-
Included w.e.f. 01.05.2024

IS 17505 : Part 1 (2021)

Specification for Thermosetting Insulated Fire Survival Cables for Fixed Installation having Low Emission of Smoke and Corrosive Gases when Affected by Fire for Working Voltages upto and including 1100 Vac and 1500 Vdc

140000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	1000	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	500	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	1000	-
Cl. 11,14,16, Table 4 and Table 6 of IS 17505 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 36)-1984(Diameter of armour Wire)	-	250	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 37)-1984(Tensile strength and elongation at break)	-	250	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 38)-1984(Torsion Test on galvanised steel wire for armouring)	-	250	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 39)-1984(Winding Test for Formed Wires)	-	250	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 40)-1984(Uniformity of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	350	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 41)-1984(Mass of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	350	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 42)-1984(Resistivity test)	-	500	-
Table 1 and Table 2 of IS 17505 -1: 2021, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	3000	-
Cl 18.2 of IS 17505-1:2021 & IS:10810 (Part 45)-1984(High voltage test)	-	2000	-
Table 1 of IS 17505-1 :2021 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	2000	-
Cl. 18.6 of IS 17505-1:2021 & IS:10810 (Part 58)-1998(Oxygen index)	-	3000	-
Cl. 18.7 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	3000	-
Table-1 & Table-2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	3000	-
Specification for thermosetting insulated fire survival cables for fixed installation having low emission of smoke and corrosive gases when affected by fire for working voltages upto and including 1100 V A.C. and 1500 V D.C(Hot deformation)	-	500	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	10000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	10000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	10000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	10000	-
Table 1 of IS 17505-1: 2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	500	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 30)-1984(Hot set test)	-	2000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone Resistance test)	-	5000	-
Cl 18.5.1 of IS 17505-1 :2021 & IS:10810 (Part 61)-1988(Flame test on single cable)	-	2000	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 7)-1984(Tensile strength and elongation at break.)	-	1500	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Cl 18.6 of IS 17505-1: 2021 & IS:10810 (Part 58)-1998(Oxygen Index.)	-	0	-
Cl 18.8 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	0	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone resistance test)	-	0	-
Table 2 of IS 17505-1:2021 & IS:10810 (Part 15)-1984(Hot deformation)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	500	-
Cl 18.2of IS 17505-1:2021 & IS:10810 (Part 45)-1984.(High Voltage test.)	-	0	-
Cl 18.5of IS 17505-1:2021 & IS:10810 (Part 53)-1984(Flammability Test)	-	1000	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 20)-1984(Cold bend test)	-	500	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	0	-
Cl 18.5 of IS 17505-1:2021 & IS:10810 (Part 61)-1988(Flammability Test)	-	0	-
Cl 18.9 of IS 17505-1:2021(Water immersion test ( effect of water on sheath of cable))	-	2000	-
Cl 18.8 of IS 17505-1:2021& IS:10810 (Part 63)-1993(Smoke density test)	-	5000	-
Cl. 3.5, 18.4 & Annex-E of IS 17505-1:2021(Circuit integrity test under fire)	-	45000	-
Cl. 17.1 Table 9 (iv) e(Heat Shock)	-	500	-
Cl. 17.1 Table 9 (iv) h(Water absorption (Gravimetric))	-	3000	-
Cl. 17.1 Table 9 (vii) b(Flame test on bunched cable)	-	5000	-
Cl. 17.1 Table 9 (ix)(Abrasion resistance test)	-	5000	-
IS 191:2007 & IS 440(Copper purity test)	-	0	-

-
Included w.e.f. 01.05.2024 Exclusion: IS 191:2007 & IS 440 (Copper Purity Test)

IS 3854 (2023)

Switches for Domestic and Similar Purposes - Specification (Third Revision)

25000 View breakup
Rs. 20000/- up to 32A, Rs. 25000/- for over 32A

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	500	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-5(General notes on tests)	-	500	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-6(Rating)	-	500	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-7(Classification)	-	800	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-8(Marking)	-	1000	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-9(Checking of dimensions)	-	1000	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-10.1, 10.2(Prevention of Access to Live Parts)	-	400	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-10.3(Requirements for Accessible Metal Parts)	-	150	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-10.4(Requirements for Insulation of the Mechanism)	-	150	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl. 10.5(Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-	100	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-10.6(Requirements for Switches Operated Indirectly)	-	100	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-10.7(Requirements for Switches with Replaceable Pull Cord)	-	100	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-11(Provision for earthing)	-	1000	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-12(Terminals)	-	1500	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-13(Constructional requirements)	-	1000	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-14(Mechanism)	-	1200	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-15.1(Resistance to Ageing)	-	500	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-15.2(Protection Provided by Enclosures of Switches)	-	1000	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-15.3(Resistance to Humidity)	-	500	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-16.1(General)	-	0	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-16.2(Test for Measuring the Insulation Resistance)	-	500	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-16.3(Electric Strength Test)	-	500	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-17(Temperature rise)	-	1000	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-18(Making and breaking capacity)	-	2000	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-19(Normal operation)	-	3000	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-20(Mechanical strength)	-	1000	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-21(Resistance to heat)	-	1000	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-22(Screws, current carrying parts and connections)	-	1000	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-23(Creepage distances, clearances and distance through sealing compound)	-	1000	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-24.1(Resistance to abnormal heat and fire)	-	500	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-24.2(Resistance to tracking)	-	500	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-25(Resistance to rusting)	-	1000	Rs.20000 up to 32A, Rs.25000 for over 32 A.
Cl-4(General Requirements)	-	-	-
Cl-5(General notes on tests)	-	-	-
Cl-6(Rating)	-	-	-
Cl-7(Classification)	-	-	-
Cl-8(Marking)	-	-	-
Cl-9(Checking of dimensions)	-	-	-
Cl-10.1, 10.2(Prevention of Access to Live Parts)	-	-	-
Cl-10.3(Requirements for Accessible Metal Parts)	-	-	-
Cl-10.4(Requirements for Insulation of the Mechanism)	-	-	-
Cl. 10.5(Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-	-	-
Cl-10.6(Requirements for Switches Operated Indirectly)	-	-	-
Cl-10.7(Requirements for Switches with Replaceable Pull Cord)	-	-	-
Cl-11(Provision for earthing)	-	-	-
Cl-12(Terminals)	-	-	-
Cl-13(Constructional requirements)	-	-	-
Cl-14(Mechanism)	-	-	-
Cl-15.1(Resistance to Ageing)	-	-	-
Cl-15.2(Protection Provided by Enclosures of Switches)	-	-	-
Cl-15.3(Resistance to Humidity)	-	-	-
Cl-16.1(General)	-	-	-
Cl-16.2(Test for Measuring the Insulation Resistance)	-	-	-
Cl-16.3(Electric Strength Test)	-	-	-
Cl-17(Temperature rise)	-	-	-
Cl-18(Making and breaking capacity)	-	-	-
Cl-19(Normal operation)	-	-	-
Cl-20(Mechanical strength)	-	-	-
Cl-21(Resistance to heat)	-	-	-
Cl-22(Screws, current carrying parts and connections)	-	-	-
Cl-23(Creepage distances, clearances and distance through sealing compound)	-	-	-
Cl-24.1(Resistance to abnormal heat and fire)	-	-	-
Cl-24.2(Resistance to tracking)	-	-	-
Cl-25(Resistance to rusting)	-	-	-

-
Included w.e.f. 22.03.2024

IS 16047 : Part 3 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Secondary Lithium Cells and Batteries for Portable Applications Part 3 Prismatic and Cylindrical Lithium Secondary Cells, and Batteries Made From Them ( First Revision )

300000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Cell Designation and Marking)	-	5000	-
7.1, 7.2(Charging Procedure for Test Purpose)	-	10000	-
7.3.1(Discharge Performance at 20°C (Rated Capacity))	-	15000	-
7.3.2("Discharge Performance at -20°C ")	-	20000	-
7.3.3(High Rate Discharge Performance at 20°C)	-	15000	-
7.4(Charge (capacity) Retention and Recovery)	-	40000	-
7.5(Charge (Capacity) Recovery After Long Term Storage)	-	80000	-
7.6.2(Endurance In Cycles at a Rate of 0.2It A)	-	50000	-
7.6.3("Endurance in Cycles at a Rate of 0.5It A (Accelerated Test Procedure) ")	-	50000	-
7.7(Battery Internal Resistance)	-	10000	-

-
Included w.e.f. 22.03.2024 Exclusion: Cl.7.8 (Electrostatic Discharge (ESD))

IS 3854 (1997)

Switches for domestic and similar purposes - Specification (Second Revision)

10000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Marking)	-	20	-
8(Marking)	-	20	-
8(Marking)	-	20	-
8(Marking)	-	20	-
8(Marking)	-	20	-
8(Marking)	-	20	-
8(Marking)	-	20	-
8(Marking)	-	20	-
8(Marking)	-	20	-
8.9(Marking)	-	20	Test
8(Marking)	-	20	-
6(Rating)	-	20	-
6(Rating)	-	20	-
7(Classification)	-	20	-
7(Classification)	-	20	-
7(Classification)	-	20	-
7(Classification)	-	20	-
7(Classification)	-	20	-
7(Classification)	-	20	-
7(Classification)	-	20	-
7(Classification)	-	20	-
7(Classification)	-	20	-
10(Protection against Electric Shock)	-	20	Test
11.1(Provision for earthing)	-	20	Test
12(Terminals)	-	20	Test
12.2.1(Terminals)	-	20	-
12(Terminals)	-	20	-
12.2.2(Connection of conductor)	-	20	-
12.2.3(Mechanical strength of terminals)	-	20	-
12.2.3(Mechanical strength of terminals)	-	20	-
12.2.4(Resistance to corrosion)	-	20	-
12.2.4(Resistance to corrosion)	-	20	-
12.2.5(Undue damage to conductor)	-	50	Test
12.2.7(Insertion of conductor)	-	20	Test
12.2.9(Locking against accidental loosening)	-	20	Test
12.2.11(Distance between screw and conductor)	-	20	Test
12.2.11(Distance between screw and conductor)	-	20	-
12.3.2(Screwless terminals)	-	20	Test
12.3.3(Connectin of conductor)	-	20	-
12.3.4(Material of terminals)	-	20	-
12.3.5(Clamping)	-	20	Test
12.3.5(Clamping)	-	20	-
12.3.7(v) Interconnection of conductors [Cl. 12.3.7])	-	20	-
12.3.7(v) Interconnection of conductors [Cl. 12.3.7])	-	20	-
12.3.11(vi) Electrical & Thermal Stresses [Cl 12.3.11])	-	20	Test
12.3.11(vi) Electrical & Thermal Stresses [Cl 12.3.11])	-	20	-
12.3.12(vii) Deflection Stresses [Cl. 12.3.12])	-	20	Test
13.1(a) Insulating lining, barriers and the like [Cl 13.1])	-	20	-
13.2(b) Construction of switch [Cl 13.2])	-	20	-
13.2(i) Installation Test)	-	20	Test
13.3(c) Covers,cover plates and actuating members [Cl 13.3])	-	20	Test
13.4(d) Ordinary switches [Cl 13.4])	-	20	Test
13.5(e) Rotary switches [Cl 13.5])	-	20	Test
13.6(f) Screws and other means [Cl 13.6])	-	20	-
13.7(g) Combination of switches or switches and socket outlets [Cl 13.7])	-	20	-
13.8(h) Assessories combined with switches [Cl. 13.8])	-	20	-
13.9(j) Switches other than ordinary switches [Cl. 13.9])	-	20	Test
13.9(j) Switches other than ordinary switches [Cl. 13.9])	-	20	-
13.9(j) Switches other than ordinary switches [Cl. 13.9])	-	20	-
13.9(j) Switches other than ordinary switches [Cl. 13.9])	-	20	-
13.9(j) Switches other than ordinary switches [Cl. 13.9])	-	20	-
13.9(j) Switches other than ordinary switches [Cl. 13.9])	-	20	-
13.9(j) Switches other than ordinary switches [Cl. 13.9])	-	20	-
13.1(k) Switches to be installed in a box [Cl. 13.10])	-	20	-
13.11(l) Surface type switches other than ordinary switch [Cl. 13.11])	-	20	Test
13.12, 13.13, 13.14(m) Inlet opening [Cl. 13.12.13.13 & 13.14])	-	20	Test
13.15(q) Requirements for membrane in inlet opening [ Cl. 13.15])	-	20	Test
13.15(q) Requirements for membrane in inlet opening [ Cl. 13.15])	-	20	-
13.15(q) Requirements for membrane in inlet opening [ Cl. 13.15])	-	20	-
13.15(q) Requirements for membrane in inlet opening [ Cl. 13.15])	-	20	-
14(Mechanism [Cl. 14])	-	20	-
14.4(Mechanism)	-	20	Test
15.1(Resistance to Ageing, to Harmful Ingress of water and to Humidity [Cl. 15]: Resistance to Ageing, [Cl. 15.1])	-	100	Test
15.2(b)Resistance to Harmful ingress of water [Cl. 15.2])	-	100	Test
15.2(b)Resistance to Harmful ingress of water [Cl. 15.2])	-	100	-
15.3(c) Resistance to Humidity [Cl. 15.3])	-	200	Test
16.1(Insulation resistance [Cl. 16.1])	-	200	Test
16.2( Electric Strength [Cl. 16.2])	-	200	Test
17(Temperature- rise [Cl. 17])	-	200	Test
18(Marking and breaking Capacity[Cl. 18])	-	250	-
18(Marking and breaking Capacity[Cl. 18])	-	250	Test
19(Normal Operation [Cl. 19] a) General & Operation)	-	500	-
19.2(Normal Operation (For AX type Switches) [Cl. 19.2])	-	500	-
19(b) Electric Strength)	-	200	-
19(c)Temperature-rise )	-	200	-
14.3(d)Test for arcing and sparking [Cl 14.3])	-	200	Test
19.2(Normal Operation (For AX type Switches) [Cl. 19.2])	-	200	Test
20(Mechanical Strength Test [Cl. 20])	-	20	Test
21(Resistance to Heat [Cl.21])	-	20	Test
21(Resistance to Heat [Cl.21])	-	20	-
21(Resistance to Heat [Cl.21])	-	20	-
22(Screw, Current Carrying Part And Connection [Cl.22])	-	20	-
22.1(i) Screw & Nuts [Cl.22.1])	-	20	Test
22.4(ii) Screw & rivets [Cl . 22.4])	-	20	-
22.3(iii) Electrical Connections [Cl.22.3])	-	20	-
22.5(iv) Current carrying part [Cl.22.5])	-	20	-
23.2(Creepage distances, clearances and distance through sealing compound [Cl.23])	-	20	Test
23(Creepage distances, clearances and distance through sealing compound [Cl.23])	-	20	-
23(Creepage distances, clearances and distance through sealing compound [Cl.23])	-	20	-
24.1.1(Resistance to Abnormal Heat & Fire [Cl.24.1] [Glow Wire Test] [Cl.24.1.1])	-	200	Test
24.2(Resistance to tracking [For Switch other than ordinary] [Cl.24.2])	-	200	Test
24.2(Resistance to tracking [For Switch other than ordinary] [Cl.24.2])	-	200	-
25 of IS 3854 : 1997(Resistance to rusting)	-	200	-
11.3(Provision for earthing)	-	20	-
11.2(Provision for earthing)	-	20	-
12.3.9(Screwless terminal fixing)	-	20	-
12.3.8(Screwless terminals design)	-	20	-
12.3.6(Connection)	-	20	-
12.3.1(Screwless terminals)	-	20	-
14.6(Mechanism)	-	20	-
14.5(Mechanism)	-	20	-
16.3(Flash test)	-	20	-
20.8(Mechanical Strength Test)	-	20	-
20.7(Mechanical Strength Test)	-	20	-
20.6(Mechanical Strength Test)	-	20	-
20.5(Mechanical Strength Test)	-	20	-
20.4(Mechanical Strength Test)	-	20	-
20.3(Mechanical Strength Test)	-	20	-
20.2(Mechanical Strength Test)	-	20	-
20.1(Mechanical Strength Test)	-	20	-
21.2(Resistance to Heat)	-	20	-
21.1(Resistance to Heat)	-	20	-
22.2(Measurement and manual test)	-	20	-
22.6(Inspection and chemical analysis)	-	20	-
24.1(Resistance of insulating material to abnormal heat, to fire and to tracking )	-	200	-
24(Resistance of insulating material to abnormal heat, to fire and to tracking )	-	200	-
23.2(Creepage distances, clearances & distance through sealing compound )	-	20	-
23.1(Creepage distances, clearances & distance through sealing compound )	-	20	-
22.7(Screws, current carrying parts and connections )	-	20	-
22.6(Screws, current carrying parts and connections )	-	20	-
22.5(Screws, current carrying parts and connections )	-	20	-
22.4(Screws, current carrying parts and connections )	-	20	-
22.3(Screws, current carrying parts and connections )	-	20	-
22.2(Screws, current carrying parts and connections )	-	20	-
22.1(Screws, current carrying parts and connections )	-	20	-
21.3(Resistance to heat )	-	40	-
21.2(Resistance to heat )	-	20	-
21.1(Resistance to heat )	-	20	-
20.9(Mechanical strength )	-	20	-
20.8(Mechanical strength )	-	10	-
20.7(Mechanical strength )	-	10	-
20.6 & 24.4.2(Mechanical strength )	-	20	-
20.6 & 24.4.1(Mechanical strength )	-	20	-
20.5 & 24.4.2(Mechanical strength )	-	20	-
20.5 & 24.4.1(Mechanical strength )	-	20	-
20.4.2(Mechanical strength )	-	20	-
20.4.1(Mechanical strength )	-	20	-
20.4(Mechanical strength )	-	20	-
20.3(Mechanical strength )	-	20	-
20.2(Mechanical strength )	-	20	-
20.1(Mechanical strength )	-	20	-
19.2(Normal operation)	-	20	-
19.1(Normal operation)	-	500	-
18.2(Making and breaking capacity )	-	200	-
18.1(Making and breaking capacity )	-	200	-
16.3(Insulation resistance and electric strength )	-	100	-
16(Insulation resistance and electric strength )	-	100	-
15.3(Resistance to ageing, to harmful ingress of water and to humidity )	-	100	-
15.2.3(Resistance to ageing, to harmful ingress of water and to humidity )	-	100	-
15.2.2(Resistance to ageing, to harmful ingress of water and to humidity )	-	100	-
15.2.1(Resistance to ageing, to harmful ingress of water and to humidity )	-	100	-
15.2(Resistance to ageing, to harmful ingress of water and to humidity )	-	100	-
15.1(Resistance to ageing, to harmful ingress of water and to humidity )	-	100	-
15(Resistance to ageing, to harmful ingress of water and to humidity )	-	100	-
14.6(Mechanism)	-	10	-
14.5(Mechanism)	-	10	-
14.4(Mechanism)	-	10	-
14.3(Mechanism)	-	10	-
14.2(Mechanism)	-	10	-
14.1(Mechanism)	-	20	-
13.15.2(Constructional requirements )	-	20	-
13.15.1(Constructional requirements )	-	20	-
13.15(Constructional requirements )	-	20	-
13.14(Constructional requirements )	-	20	-
13.13(Constructional requirements )	-	20	-
13.12(Constructional requirements )	-	20	-
13.11(Constructional requirements )	-	20	-
13.1(Constructional requirements )	-	20	-
13.9(Constructional requirements )	-	20	-
13.8(Constructional requirements )	-	20	-
13.7(Constructional requirements )	-	20	-
13.6(Constructional requirements )	-	20	-
13.5(Constructional requirements )	-	20	-
13.4(Constructional requirements )	-	20	-
13.3.3(Constructional requirements )	-	20	-
13.3.2(Constructional requirements )	-	20	-
13.3.1(Constructional requirements )	-	20	-
13.3(Constructional requirements )	-	20	-
13.2(Constructional requirements )	-	20	-
13.1(Constructional requirements )	-	20	-
13(Constructional requirements )	-	20	-
12.3.12(Terminals)	-	20	-
12.3.11.b(Terminals)	-	20	-
12.3.11.a(Terminals)	-	20	-
12.3.10(Terminals)	-	20	-
12.3.9(Terminals)	-	20	-
12.3.8(Terminals)	-	20	-
12.3.6(Terminals)	-	20	-
12.2.6(Terminals)	-	20	-
12.2(Terminals)	-	20	-
12.1(Terminals)	-	20	-
11.4(Provision for earthing)	-	20	-
11.3(Provision for earthing)	-	20	-
11.2(Provision for earthing)	-	20	-
11.1(Provision for earthing)	-	20	-
10.7(Protection against electric shock )	-	20	-
10.6(Protection against electric shock )	-	20	-
10.5(Protection against electric shock )	-	20	-
10.4(Protection against electric shock )	-	20	-
10.3.2(Protection against electric shock )	-	20	-
10.3.1(Protection against electric shock )	-	20	-
10.3(Protection against electric shock )	-	20	-
10.2(Protection against electric shock )	-	20	-
10.1(Protection against electric shock )	-	20	-
8.1(Marking)	-	20	-
8.8(Marking)	-	20	-
8.7(Marking)	-	20	-
8.6(Marking)	-	20	-
8.5(Marking)	-	20	-
8.4(Marking)	-	20	-
8.3(Marking)	-	20	-
8.2(Marking)	-	20	-
8.1(Marking)	-	20	-
7.2(Classification)	-	20	-
7.1.8(Classification)	-	20	-
7.1.7(Classification)	-	20	-
7.1.6(Classification)	-	20	-
7.1.5(Classification)	-	20	-
7.1.4(Classification)	-	20	-
7.1.3(Classification)	-	20	-
7.1.2(Classification)	-	20	-
7.1.1(Classification)	-	20	-
7.1(Classification)	-	20	-
6.2(Ratings)	-	20	-
6.1(Ratings)	-	20	-
6(Ratings)	-	20	-
25(Resistance to Rusting)	-	200	-

-
Included w.e.f. 11.10.2018

Bureau of Indian Standards

The National Standards Body of India

Alpha Test House Private Limited, Delhi

487/25, Near Prachin Shiv Mandir Peeragarhi, DELHI, New Delhi, Delhi, 110087

9711227171 electrical@alphatesthouse.com

Scope List