1 |
IS 9873 : Part 3 (2020) |
Safety of Toys Part 3 Migration of Certain Elements ( Third Revision ) |
-
|
3000 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
4.1 - Table 1(Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010) |
- |
375 |
|
GST @ 18% Extra |
4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010) |
- |
375 |
|
375 GST @ 18% Extra |
4.1 - Table 1(Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010) |
- |
375 |
|
375 GST @ 18% Extra |
4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010) |
- |
375 |
|
375 GST @ 18% Extra |
4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010) |
- |
375 |
|
375 GST @ 18% Extra |
4.1 - Table 1(Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010) |
- |
375 |
|
375 GST @ 18% Extra |
4.1 - Table 1(Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010) |
- |
375 |
|
375 GST @ 18% Extra |
4.1 - Table 1(Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010) |
- |
375 |
|
375 GST @ 18% Extra |
4.1 - Table 1(Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010) |
- |
375 |
|
375 GST @ 18% Extra |
4.1 - Table 1(Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010) |
- |
375 |
|
375 GST @ 18% Extra |
4.1 - Table 1(Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010) |
- |
375 |
|
375 GST @ 18% Extra |
4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010) |
- |
375 |
|
375 GST @ 18% Extra |
4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010) |
- |
375 |
|
375 GST @ 18% Extra |
4.1 - Table 1(Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010) |
- |
375 |
|
375 GST @ 18% Extra |
4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010) |
- |
375 |
|
375 GST @ 18% Extra |
4.1 - Table 1(Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010) |
- |
375 |
|
375 GST @ 18% Extra |
|
Complete
|
|
26 Aug, 2024 |
- |
2 |
IS 616 (2017) |
Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision) |
-
|
45000 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
5(Marking and instructions) |
- |
2000 |
|
- |
7(Heating under normal operating conditions) |
- |
3000 |
|
- |
8(Constructional requirements with regard to the protection against electric shock) |
- |
3000 |
|
- |
9(Electric shock hazard under normal operating conditions) |
- |
3000 |
|
- |
10(Insulation requirements) |
- |
5000 |
|
- |
11(Fault conditions) |
- |
5000 |
|
- |
12(Mechanical strength) |
- |
5000 |
|
- |
13(CLEARANCES and CREEPAGE DISTANCES) |
- |
3000 |
|
- |
14(Components) |
- |
0 |
|
- |
15(TERMINALS) |
- |
3000 |
|
- |
16(External flexible cords) |
- |
4000 |
|
- |
17(Electrical connections and mechanical fixings) |
- |
3000 |
|
- |
19(Stability and mechanical hazards) |
- |
3000 |
|
- |
20(Resistance to fire) |
- |
3000 |
|
- |
|
Complete
|
|
26 Aug, 2024 |
- |
3 |
IS 16046 : Part 1 (2018) |
Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 1 Nickel Systems ( Second Revision ) |
-
|
80000 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
4(Parameter Measurement Tolerances) |
- |
0 |
|
Qualitative test |
5(General Safety Considerations) |
- |
0 |
|
Qualitative test |
5.1(General) |
- |
0 |
|
Qualitative test |
5.2(Insulation and Wiring) |
- |
0 |
|
Qualitative test |
5.3(Venting) |
- |
0 |
|
Qualitative test |
5.4(Temperature, Voltage and Current Management) |
- |
0 |
|
Qualitative test |
5.5(Terminal Contacts) |
- |
0 |
|
Qualitative test |
5.6(Assembly of Cells into batteries) |
- |
0 |
|
Qualitative test |
5.7(Quality Plan) |
- |
0 |
|
Qualitative test |
6(Tyoe Test amd Sample Size) |
- |
0 |
|
Qualitative test |
7(Specific requirements and tests) |
- |
0 |
|
Qualitative test |
7.1(Charging procedure for test purposes) |
- |
0 |
|
Qualitative test |
7.2(Intended Use) |
- |
20000 |
|
Charging discharging test range upto 100V & 500A available |
7.3(Reasonably foreseeable misuse) |
- |
45000 |
|
Nil |
8(Information for safety) |
- |
5000 |
|
Nil |
8.1(General) |
- |
0 |
|
Nil |
8.2(Small Cell and battery safety information) |
- |
0 |
|
Nil |
9(Marking) |
- |
5000 |
|
Nil |
9.1(Cell Marking) |
- |
0 |
|
Nil |
9.2(Battery Marking) |
- |
0 |
|
Nil |
9.4(Other information) |
- |
0 |
|
Nil |
10(Packaging) |
- |
5000 |
|
Nil |
|
Complete
|
|
26 Aug, 2024 |
- |
4 |
IS 16046 : Part 2 (2018) |
Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 2 Lithium Systems ( Second Revision ) |
-
|
70000 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
4(Parameter Measurement Tolerances) |
- |
0 |
|
Qualitative Test |
5(General Safety Considerations) |
- |
0 |
|
Qualitative Test |
5.1(General) |
- |
0 |
|
Qualitative Test |
5.2(Insulation and Wiring) |
- |
0 |
|
Qualitative Test |
5.3(Venting) |
- |
0 |
|
Qualitative Test |
5.4(Temperature, Voltage and Current Management) |
- |
0 |
|
Qualitative Test |
5.5(Terminal Contacts) |
- |
0 |
|
Qualitative Test |
5.6(Assembly of Cells into batteries) |
- |
0 |
|
Qualitative Test |
5.7(Quality Plan) |
- |
0 |
|
Qualitative Test |
5.8(Battery Safety Components) |
- |
0 |
|
Qualitative Test |
6(Tyoe Test amd Sample Size) |
- |
0 |
|
Qualitative Test |
7(Specific requirements and tests) |
- |
0 |
|
Qualitative Test |
7.1(Charging procedure for test purposes) |
- |
0 |
|
Test capacity upto 100V , 400A |
7.2(Intended Use) |
- |
10000 |
|
Nil |
7.3(Reasonably foreseeable misuse) |
- |
50000 |
|
Test capacity upto 100V , 400A |
8(Information for safety) |
- |
5000 |
|
Nil |
8.1(General) |
- |
0 |
|
Qualitative Test |
8.2(Small Cell and battery safety information) |
- |
0 |
|
Qualitative Test |
9(Marking) |
- |
5000 |
|
Nil |
9.1(Cell Marking) |
- |
0 |
|
Qualitative Test |
9.2(Battery Marking) |
- |
0 |
|
Qualitative Test |
9.3(Caution for ingestion of small cells and batteries) |
- |
0 |
|
Qualitative Test |
9.4(Other information) |
- |
0 |
|
Qualitative Test |
10(Packaging) |
- |
0 |
|
Qualitative Test |
|
Complete
|
|
26 Aug, 2024 |
- |
5 |
IS 12444 (2020) |
Copper Wire Rods for Electrical Applications — Specification ( First Revision ) |
-
|
30000 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
5.1 Table-1(Te) |
- |
1000 |
|
- |
5.1 Table-1(Se) |
- |
1000 |
|
- |
5.1 Table-1(Bi) |
- |
1000 |
|
- |
5.1 Table-1(Se+Te+Bi) |
- |
1000 |
|
- |
5.1 Table-1(Sb) |
- |
1000 |
|
- |
5.1 Table-1(As) |
- |
1000 |
|
- |
5.1 Table-1(Sn) |
- |
1000 |
|
- |
5.1 Table-1(Pb) |
- |
1000 |
|
- |
5.1 Table-1(Fe) |
- |
1000 |
|
- |
5.1 Table-1(Ni) |
- |
1000 |
|
- |
5.1 Table-1(S) |
- |
1000 |
|
- |
5.1 Table-1(Ag) |
- |
1000 |
|
- |
5.1 Table-1(O) |
- |
1000 |
|
- |
5.1 Table-1(Maximum Allowable Total Impurities) |
- |
1000 |
|
- |
6.1(Dimension) |
- |
1000 |
|
- |
6.2.2(Ovality) |
- |
1000 |
|
- |
7.0(Freedom from Defects) |
- |
1000 |
|
- |
8.1(Tensile Strength) |
- |
1000 |
|
- |
8.2(Surface Compression Test) |
- |
2000 |
|
- |
Table-4(Volume Resistivity) |
- |
2000 |
|
- |
Table-4(Mass Resistivity) |
- |
2000 |
|
- |
Table-4(Electrical Conductivity) |
- |
2000 |
|
- |
7.2(Surface Oxide) |
- |
2000 |
|
- |
10.5(Microscopic Examination) |
- |
2000 |
|
- |
|
Complete
|
|
26 Aug, 2024 |
- |
6 |
IS 21 (1992) |
Wrought aluminium and aluminium alloys for manufacture of utensils specification (Fourth Revision) |
-
|
16000 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
4.2,
Table 2 of IS:21 (Designation & Condition 64430, WP')(Bend Test (Radius of Bend)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 64430, WP')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 64430, WP')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 64430, WP')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 64430, WP')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 64430, WP')(Tensile Strength) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 64430, WP')(0.2 Percent Proof Stress) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 64430, 'W')(Bend Test (Radius of Bend)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 64430, 'W')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 64430, 'W')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 64430, 'W')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 64430, 'W')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 64430, 'W')(Tensile Strength) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 64430, 'W')(0.2 Percent Proof Stress) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 64430, 'O')(Bend Test (Radius of Bend)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 64430, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 64430, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 64430, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 64430, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 64430, 'O')(Tensile Strength) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H4')(Bend Test (Radius of Bend)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H4')(Tensile Strength) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H3')(Bend Test (Radius of Bend)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H3')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H3')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H3')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H3')(Tensile Strength) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H3')(0.2 Percent Proof Stress) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H2')(Bend Test (Radius of Bend)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H2')(Tensile Strength) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H2')(0.2 Percent Proof Stress) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H1')(Bend Test (Radius of Bend)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H1')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H1')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H1')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H1')(Tensile Strength) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H1')(0.2 Percent Proof Stress) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H3')(Bend Test (Radius of Bend)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H3')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H3')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H3')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H3')(Tensile Strength) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H3')(0.2 Percent Proof Stress) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H2')(Bend Test (Radius of Bend)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H2')(Tensile Strength) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H2')(0.2 Percent Proof Stress) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H1')(Bend Test (Radius of Bend)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H1')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H1')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H1')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H1')(Tensile Strength) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H1')(0.2 Percent Proof Stress) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'O')(Bend Test (Radius of Bend)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'O')(Tensile Strength) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H4')(Bend Test (Radius of Bend)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H4')(Tensile Strength) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H3')(Bend Test (Radius of Bend)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H3')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H3')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H3')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H3')(Tensile Strength) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H2')(Bend Test (Radius of Bend)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H2')(Tensile Strength) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H1')(Bend Test (Radius of Bend)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H1')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H1')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H1')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H1')(Tensile Strength) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'O')(Bend Test (Radius of Bend)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'O')(Tensile Strength) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Bend Test (Radius of Bend)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Tensile Strength) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Bend Test (Radius of Bend)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Tensile Strength) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Bend Test (Radius of Bend)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Tensile Strength) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Bend Test (Radius of Bend)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Tensile Strength) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'O')(Bend Test (Radius of Bend)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'O')(Tensile Strength) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Bend Test (Radius of Bend)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Tensile Strength) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Bend Test (Radius of Bend)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Tensile Strength) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Bend Test (Radius of Bend)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Tensile Strength) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Bend Test (Radius of Bend)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Tensile Strength) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'O')(Bend Test (Radius of Bend)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
100 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'O')(Tensile Strength) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19600, 'H4')(Bend Test (Radius of Bend)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19600, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19600, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19600, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19600, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19600, 'H4')(Tensile Strength) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19600, 'H2')(Bend Test (Radius of Bend)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19600, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19600, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19600, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19600, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19600, 'H2')(Tensile Strength) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19600, 'O')(Bend Test (Radius of Bend)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19600, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19600, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19600, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19600, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19600, 'O')(Tensile Strength) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Bend Test (Radius of Bend)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Tensile Strength) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Bend Test (Radius of Bend)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Tensile Strength) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19500, 'O')(Bend Test (Radius of Bend)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19500, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19500, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19500, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19500, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19500, 'O')(Tensile Strength) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Bend Test (Radius of Bend)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Tensile Strength) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Bend Test (Radius of Bend)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Tensile Strength) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Bend Test (Radius of Bend)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Tensile Strength) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Bend Test (Radius of Bend)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Tensile Strength) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'O')(Bend Test (Radius of Bend)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
0 |
|
- |
4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'O')(Tensile Strength) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 64430)(Aluminium) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 64430)(Lead) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 64430)(Chromium) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 64430)(Titanium and or other grain refining elements) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 64430)(Zinc) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 64430)(Manganese) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 64430)(Iron) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 64430)(Silicon) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 64430)(Magnesium) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 64430)(Copper) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 51000-B)(Aluminium) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 51000-B)(Lead) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 51000-B)(Chromium) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 51000-B)(Zinc) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 51000-B)(Manganese) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 51000-B)(Iron) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 51000-B)(Silicon) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 51000-B)(Magnesium) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 51000-B)(Copper) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 51000-A)(Aluminium) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 51000-A)(Lead) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 51000-A)(Chromium) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 51000-A)(Zinc) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 51000-A)(Manganese) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 51000-A)(Iron) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 51000-A)(Silicon) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 51000-A)(Magnesium) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 51000-A)(Copper) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 40800)(Aluminium) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 40800)(Lead) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 40800)(Titanium and or other grain refining elements) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 40800)(Zinc) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 40800)(Manganese) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 40800)(Iron) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 40800)(Silicon) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 40800)(Magnesium) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 40800)(Copper) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 31500)(Aluminium) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 31500)(Titanium and or other grain refining elements) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 31500)(Lead) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 31500)(Zinc) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 31500)(Manganese) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 31500)(Iron) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 31500)(Silicon) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 31500)(Magnesium) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 31500)(Copper) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 31000)(Aluminium) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 31000)(Lead) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 31000)(Chromium) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 31000)(Titanium and or other grain refining elements) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 31000)(Zinc) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 31000)(Manganese) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 31000)(Iron) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 31000)(Silicon) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 31000)(Magnesium) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 31000)(Copper) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 19600)(Aluminium) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 19600)(Cu+Si+Fe+Mn+Zn) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 19600)(Lead) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 19600)(Zinc) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 19600)(Manganese) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 19600)(Iron) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 19600)(Silicon) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 19600)(Copper) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 19500)(Aluminium) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 19500)(Cu+Si+Fe+Mn+Zn) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 19500)(Lead) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 19500)(Zinc) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 19500)(Manganese) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 19500)(Iron) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 19500)(Silicon) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 19500)(Copper) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 19000)(Lead) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 19000)(Cu+Mg+Si+Fe+Mn+Zn) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 19000)(Aluminium) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 19000)(Zinc) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 19000)(Manganese) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 19000)(Iron) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 19000)(Silicon) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 19000)(Magnesium) |
- |
0 |
|
- |
4.2,
Table 1of IS:21 (Designation 19000)(Copper) |
- |
0 |
|
- |
4.1, & 4.1.1(Lead) |
- |
0 |
|
- |
4.1.2(Aluminium) |
- |
0 |
|
- |
5(Marking) |
- |
0 |
|
- |
|
Complete
|
|
26 Aug, 2024 |
- |
7 |
IS 7534 (1985) |
Specificaiton for sliding locking bolts for use with padlocks |
-
|
20000 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
6.1 table 2(DIMENSIONS OF LOCKING BOLT) |
- |
2000 |
|
- |
5.1 table 2(1. The locking bolts shall have smooth sliding action.
2. All sharp edges and corners shall be removed and finished smooth.
3. All screw holes shall be countersunk to suit the countersunk head wood
screws) |
- |
2000 |
|
- |
7.1(Mild steel locking bolts copper oxidized) |
- |
2000 |
|
- |
7.1(Mild steel locking bolts Electrogalvanised) |
- |
2000 |
|
- |
7.1(Aluminium alloy bolt anodized) |
- |
2000 |
|
- |
7.1(Anodic Coatic) |
- |
2000 |
|
- |
5.1.1(Bolt Plate) |
- |
3000 |
|
- |
5.1.2(Bolt) |
- |
3000 |
|
- |
4(Mild steel sheet, Aluminium alloy sheet) |
- |
2000 |
|
- |
|
Complete
|
|
26 Aug, 2024 |
- |
8 |
IS 734 (1975) |
Specification for wrought aluminium and aluminium alloy forging stock and forgings (For General Engineering Purposes) (Second Revision) |
-
|
16000 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
5.1 table 1(chemical composition) |
- |
8500 |
|
- |
5.1 table 2(0.2% proof strength) |
- |
2500 |
|
- |
5.1 table 2(Tensile strength) |
- |
2000 |
|
- |
5.1 table 2(Elongation) |
- |
3000 |
|
- |
|
Complete
|
|
26 Aug, 2024 |
- |
9 |
IS 16333 : Part 3 (2022) |
Mobile phone handsets: Part 3 Indian language support for mobile phone handsets - Specific requirements(Second Revision) |
-
|
30000 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
5.1(Inputting of text) |
- |
15000 |
|
- |
5.2(Message Readability) |
- |
15000 |
|
- |
|
Complete
|
|
26 Aug, 2024 |
- |
10 |
IS 1989 : Part 1 (1986) |
Specification for leather safety boots and shoes: Part 1 for miners (Fourth Revision) |
-
|
23000 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
4.1 (a)(Marking) |
- |
1150 |
|
- |
4.1 (b)(Marking) |
- |
1150 |
|
- |
4.1 (c)(Marking) |
- |
1150 |
|
- |
4.1 (d)(Marking) |
- |
1150 |
|
- |
4.1 (e)(Marking) |
- |
1150 |
|
- |
7.1(Design) |
- |
1150 |
|
- |
10.1(Finish) |
- |
1150 |
|
- |
10.3(Finish) |
- |
1150 |
|
- |
10.4(Finish) |
- |
1150 |
|
- |
11.1(Mass
Boots with Leather Sole and Heel) |
- |
1150 |
|
- |
11.2(Mass
Boots with Rubber Sole and Heel) |
- |
1150 |
|
- |
12(Performance test) |
- |
1150 |
|
- |
13(Design) |
- |
1150 |
|
- |
16.1(Finish) |
- |
1150 |
|
- |
16.2(Finish) |
- |
1150 |
|
- |
16.3(Finish) |
- |
1150 |
|
- |
16.4(Finish) |
- |
1150 |
|
- |
17.1(Mass
Shoes with Leather Sole and Heel) |
- |
1150 |
|
- |
17.2(Mass
Shoes with Rubber Sole and Heel) |
- |
1150 |
|
- |
18(Performance test) |
- |
1150 |
|
- |
|
Complete
|
|
26 Aug, 2024 |
- |
11 |
IS 6719 (1972) |
Solid Pvc Soles And Heels |
-
|
4800 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
3.6.1(Hardness ) |
- |
400 |
|
- |
3.6 (vi)(Lead (as Pb) ppm) |
- |
400 |
|
- |
3.6 (v)(Volatility, percent by means ) |
- |
400 |
|
- |
3.6 (iv)(Tear Strength a) Force Part b) Back Part ) |
- |
400 |
|
- |
3.6 (iii)(Elongation at break, percent ) |
- |
400 |
|
- |
3.6 (ii)(Tensile Strength ) |
- |
400 |
|
- |
3.6 (i)(Relative density ) |
- |
400 |
|
- |
Cl. 3.1,3.2,3.3,3.4,3.5(Material) |
- |
400 |
|
- |
6 ,6.1,6.2,6.3(Test Method) |
- |
400 |
|
- |
Cl. 3.1,3.2,3.3,3.4,3.5(Material) |
- |
400 |
|
- |
Cl. 6.4(Measurement of thickness) |
- |
400 |
|
- |
|
Complete
|
|
26 Aug, 2024 |
- |
12 |
IS 6664 (1992) |
Rubber microcellular sheets for soles and heels - Specification (First Revision) |
-
|
9000 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
4, Cl.4.1,4.1.1,4.1.2(Requirements) |
- |
333 |
|
- |
Cl.4 Cl.4.1.3 And 8.3,Table1, i)(Relative density) |
- |
333 |
|
- |
Cl.4 Cl.4.1.3 And 8.3,Table1, ii)(Hardness, Shore A durometer min) |
- |
333 |
|
- |
Cl.4 Cl.4.1.3 And 8.3,Table1, iii)(Change in Hardness after ageing at 100±1°C for 24hr) |
- |
333 |
|
- |
Cl.4 Cl.4.1.3 And 8.3,Table1, iv)(Compression set at constant stress percent, Max) |
- |
333 |
|
- |
Cl.4 Cl.4.1.3 And 8.3,Table1, v)(Split tear strength, kg,Min) |
- |
333 |
|
- |
Cl.4 Cl.4.1.3 And 8.3,Table1, vi)(Room Temperature shrinkage at 27±2°C for 2weeks, percent, Max) |
- |
333 |
|
- |
Cl.4 Cl.4.1.3 And 8.3,Table1, vii)(Heat shrinkage test at 100±1°C for 1 hour max) |
- |
333 |
|
- |
Cl.4 Cl.4.1.3 And 8.3,Table1, viii)(Water absorption , percent by mass, Max) |
- |
333 |
|
- |
Cl.4 Cl.4.1.3 And 8.3,Table1, ix)(Flexing resistance) |
- |
333 |
|
- |
5, 5.1(Marking) |
- |
333 |
|
- |
4.2(Size & Thickness ) |
- |
333 |
|
- |
6, 6.1(Packing) |
- |
333 |
|
- |
"Cl.4 ,Cl.4.1,4.1.1,4.1.2(Requirements
") |
- |
333 |
|
- |
Cl.4.1.3 And 8.3,Table1(i) Relative density) |
- |
333 |
|
- |
Cl.4.1.3 And 8.3,Table1(ii) Hardness, Shore A durometer min) |
- |
333 |
|
- |
Cl.4.1.3 And 8.3,Table1(iii) Change in Hardness after ageing at 100±1°C for 24hr) |
- |
333 |
|
- |
Cl.4.1.3 And 8.3,Table1(iv) Compression set at constant stress percent, Max) |
- |
333 |
|
- |
Cl.4.1.3 And 8.3,Table1(vi) Room Temperature shrinkage at 27±2°C for 2weeks, percent, Max) |
- |
333 |
|
- |
Cl.4.1.3 And 8.3,Table1(vii) Heat shrinkage test at 100±1°C for 1 hour max) |
- |
333 |
|
- |
Cl.4.1.3 And 8.3,Table1(viii)Water absorption , percent by mass, Max) |
- |
333 |
|
- |
Cl.4.1.3 And 8.3,Table1(ix)Flexing resistance) |
- |
333 |
|
- |
5, 5.1(Marking) |
- |
333 |
|
- |
6, 6.1(Packing) |
- |
333 |
|
- |
|
Complete
|
|
26 Aug, 2024 |
- |
13 |
IS 1989 : Part 2 (1986) |
Specification for leather safety boots and shoes: Part 2 for heavy metal industries (Fourth Revision) |
-
|
23000 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
4(Marking) |
- |
242 |
|
- |
7(Design) |
- |
158 |
|
- |
8(a) Upper Leather) |
- |
158 |
|
- |
8(b) Lining Leather) |
- |
158 |
|
- |
8(c) Bottom Material) |
- |
158 |
|
- |
8(d) Steel Toe Cap) |
- |
158 |
|
- |
8(e) Tape) |
- |
158 |
|
- |
8(f) Bottom Filling) |
- |
158 |
|
- |
8(g) Eyelet) |
- |
158 |
|
- |
8(h) Toe Compound) |
- |
158 |
|
- |
8(i) Threads) |
- |
158 |
|
- |
8(j) Rivets) |
- |
158 |
|
- |
8(k) Screw Wire) |
- |
158 |
|
- |
8(l) Heel Pin) |
- |
158 |
|
- |
8(m) Shank) |
- |
158 |
|
- |
8(n) Laces) |
- |
158 |
|
- |
8(o) Tongue Lining) |
- |
158 |
|
- |
8(p) Adhesive) |
- |
158 |
|
- |
8(q) Strengthening Piece) |
- |
158 |
|
- |
8(r) Leather Components) |
- |
158 |
|
- |
9(Manufacture) |
- |
158 |
|
- |
10(Finish) |
- |
158 |
|
- |
11(a) Boots with Leather Sole and Heel) |
- |
158 |
|
- |
11(b) Boots with Rubber Sole and Heel) |
- |
158 |
|
- |
12(Performance Test) |
- |
158 |
|
- |
13(Design) |
- |
158 |
|
- |
14(a) Upper Leather) |
- |
158 |
|
- |
14(b) Lining Leather) |
- |
158 |
|
- |
14(c) Bottom Material) |
- |
158 |
|
- |
14(d) Steel Toe Cap) |
- |
158 |
|
- |
14(e) Tape) |
- |
158 |
|
- |
14(f) Bottom Filling) |
- |
158 |
|
- |
14(g) Eyelet) |
- |
158 |
|
- |
14(h) Toe Compound) |
- |
158 |
|
- |
14(i) Threads) |
- |
158 |
|
- |
14(j) Rivets) |
- |
158 |
|
- |
14(k) Screw Wire) |
- |
158 |
|
- |
14(l) Heel Pin) |
- |
158 |
|
- |
14(m) Shank) |
- |
158 |
|
- |
14(n) Laces) |
- |
158 |
|
- |
14(o) Tongue Lining) |
- |
158 |
|
- |
14(p) Adhesive) |
- |
158 |
|
- |
14(q) Leather Components) |
- |
158 |
|
- |
15(Manufacture) |
- |
158 |
|
- |
16(Finish) |
- |
158 |
|
- |
17(a) Shoes with Leather Sole and Heel) |
- |
158 |
|
- |
17(b) Shoes with Rubber Sole and Heel) |
- |
158 |
|
- |
18(Performance Test) |
- |
158 |
|
- |
4(Marking) |
- |
158 |
|
- |
7(Design) |
- |
158 |
|
- |
8(a) Upper Leather) |
- |
158 |
|
- |
8(b) Lining Leather) |
- |
158 |
|
- |
8(c) Bottom Material) |
- |
158 |
|
- |
8(d) Steel Toe Cap) |
- |
158 |
|
- |
8(e) Tape) |
- |
158 |
|
- |
8(f) Bottom Filling) |
- |
158 |
|
- |
8(g) Eyelet) |
- |
158 |
|
- |
8(h) Toe Compound) |
- |
158 |
|
- |
8(j) Rivets) |
- |
158 |
|
- |
8(k) Screw Wire) |
- |
158 |
|
- |
8(m) Shank) |
- |
158 |
|
- |
8(n) Laces) |
- |
158 |
|
- |
8(o) Tongue Lining) |
- |
158 |
|
- |
8(p) Adhesive) |
- |
158 |
|
- |
8(q) Strengthening Piece) |
- |
158 |
|
- |
8(r) Leather Components) |
- |
158 |
|
- |
9(Manufacture) |
- |
158 |
|
- |
10(Finish) |
- |
158 |
|
- |
11(a) Boots with Leather Sole and Heel) |
- |
158 |
|
- |
11(b) Boots with Rubber Sole and Heel) |
- |
158 |
|
- |
12(Performance Test) |
- |
158 |
|
- |
13(Design) |
- |
158 |
|
- |
14(a) Upper Leather) |
- |
158 |
|
- |
14(b) Lining Leather) |
- |
158 |
|
- |
14(c) Bottom Material) |
- |
158 |
|
- |
14(d) Steel Toe Cap) |
- |
158 |
|
- |
14(f) Bottom Filling) |
- |
158 |
|
- |
14(g) Eyelet) |
- |
158 |
|
- |
14(h) Toe Compound) |
- |
158 |
|
- |
14(i) Threads) |
- |
158 |
|
- |
14(j) Rivets) |
- |
158 |
|
- |
14(k) Screw Wire) |
- |
158 |
|
- |
14(l) Heel Pin) |
- |
158 |
|
- |
14(m) Shank) |
- |
158 |
|
- |
14(n) Laces) |
- |
158 |
|
- |
14(p) Adhesive) |
- |
158 |
|
- |
14(q) Leather Components) |
- |
158 |
|
- |
15(Manufacture) |
- |
158 |
|
- |
16(Finish) |
- |
158 |
|
- |
17(a) Shoes with Leather Sole and Heel) |
- |
158 |
|
- |
17(b) Shoes with Rubber Sole and Heel) |
- |
158 |
|
- |
7(Design) |
- |
158 |
|
- |
8(a) Upper Leather) |
- |
158 |
|
- |
8(b) Lining Leather) |
- |
158 |
|
- |
8(c) Bottom Material) |
- |
158 |
|
- |
8(d) Steel Toe Cap) |
- |
158 |
|
- |
8(e) Tape) |
- |
158 |
|
- |
8(f) Bottom Filling) |
- |
158 |
|
- |
8(g) Eyelet) |
- |
158 |
|
- |
8(h) Toe Compound) |
- |
158 |
|
- |
8(i) Threads) |
- |
158 |
|
- |
8(j) Rivets) |
- |
158 |
|
- |
8(k) Screw Wire) |
- |
158 |
|
- |
8(l) Heel Pin) |
- |
158 |
|
- |
8(m) Shank) |
- |
158 |
|
- |
8(n) Laces) |
- |
158 |
|
- |
8(o) Tongue Lining) |
- |
158 |
|
- |
8(p) Adhesive) |
- |
158 |
|
- |
8(q) Strengthening Piece) |
- |
158 |
|
- |
8(r) Leather Components) |
- |
158 |
|
- |
9(Manufacture) |
- |
158 |
|
- |
10(Finish) |
- |
158 |
|
- |
11(a) Boots with Leather Sole and Heel) |
- |
158 |
|
- |
11(b) Boots with Rubber Sole and Heel) |
- |
158 |
|
- |
12(Performance Test) |
- |
158 |
|
- |
13(Design) |
- |
158 |
|
- |
14(a) Upper Leather) |
- |
158 |
|
- |
14(b) Lining Leather) |
- |
158 |
|
- |
14(d) Steel Toe Cap) |
- |
158 |
|
- |
14(e) Tape) |
- |
158 |
|
- |
14(f) Bottom Filling) |
- |
158 |
|
- |
14(g) Eyelet) |
- |
158 |
|
- |
14(h) Toe Compound) |
- |
158 |
|
- |
14(i) Threads) |
- |
158 |
|
- |
14(j) Rivets) |
- |
158 |
|
- |
14(k) Screw Wire) |
- |
158 |
|
- |
14(l) Heel Pin) |
- |
158 |
|
- |
14(n) Laces) |
- |
158 |
|
- |
14(o) Tongue Lining) |
- |
158 |
|
- |
14(p) Adhesive) |
- |
158 |
|
- |
14(q) Leather Components) |
- |
158 |
|
- |
15(Manufacture) |
- |
158 |
|
- |
16(Finish) |
- |
158 |
|
- |
17(a) Shoes with Leather Sole and Heel) |
- |
158 |
|
- |
17(b) Shoes with Rubber Sole and Heel) |
- |
158 |
|
- |
18(Performance Test) |
- |
158 |
|
- |
|
Complete
|
|
26 Aug, 2024 |
- |
14 |
IS 11226 (1993) |
Leather safety footwear having direct moulded rubber sole specification (First Revision) |
-
|
22000 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
5.1(REQUIREMENTS) |
- |
560 |
|
- |
5.2(Materials) |
- |
536 |
|
- |
5.2.1(Materials) |
- |
536 |
|
- |
5.2.1.1(Materials) |
- |
536 |
|
- |
5.2.2(Materials) |
- |
536 |
|
- |
5.2.3(Materials) |
- |
536 |
|
- |
5.2.4(Materials) |
- |
536 |
|
- |
5.2.5(Materials) |
- |
536 |
|
- |
5.2.6(Materials) |
- |
536 |
|
- |
5.2.6.1(Materials) |
- |
536 |
|
- |
5.2.6.2(Materials) |
- |
536 |
|
- |
5.2.6.3(Materials) |
- |
536 |
|
- |
5.2.7(Materials) |
- |
536 |
|
- |
5.2.8(Materials) |
- |
536 |
|
- |
5.2.9(Materials) |
- |
536 |
|
- |
5.2.10(Materials) |
- |
536 |
|
- |
5.2.11(Materials) |
- |
536 |
|
- |
5.2.11.1(Materials) |
- |
536 |
|
- |
5.2.11.2(Materials) |
- |
536 |
|
- |
5.2.11.3(Materials) |
- |
536 |
|
- |
5.3(Components) |
- |
536 |
|
- |
5.4( Manufacture ) |
- |
536 |
|
- |
5.4.1( Manufacture ) |
- |
536 |
|
- |
5.4.8(Workmanship and Finish) |
- |
536 |
|
- |
5.5(Mass) |
- |
536 |
|
- |
5.6(Performance Test) |
- |
536 |
|
- |
5.7(Adhesion Test on Moulded Bottoms) |
- |
536 |
|
- |
7(MARKING) |
- |
536 |
|
- |
5.7(Toe adhesion ) |
- |
536 |
|
- |
5.5(Mass per pairs) |
- |
536 |
|
- |
5.4.8(Leg height) |
- |
536 |
|
- |
5.4(Dimension ) |
- |
536 |
|
- |
5.3 & 5.4.2(Thickness of components ) |
- |
536 |
|
- |
5.2.11.2(Flexing resistance) |
- |
536 |
|
- |
5.2.11.2(Resistance to Fuel Oil) |
- |
536 |
|
- |
5.2.11.2(Elongation at break) |
- |
536 |
|
- |
5.2.11.2(Tensile Strength) |
- |
536 |
|
- |
5.2.11.2(Hardness (Shore A)) |
- |
536 |
|
- |
5.2.11(Hardness (IRHD)-after ageing) |
- |
536 |
|
- |
5.2.11(Relative density ) |
- |
536 |
|
- |
|
Complete
|
|
26 Aug, 2024 |
- |
15 |
IS 17037 (2018) |
Anti riot shoes - Specification |
-
|
52000 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
5.0(Innocuosness test IS 17011) |
- |
30000 |
|
- |
4.16.2(Breaking load & lag retention) |
- |
309 |
|
- |
4.16.1(Length of laces ) |
- |
309 |
|
- |
4.15(D-ring and Hooks ) |
- |
309 |
|
- |
4.15.10(Resistance to fuel oil ) |
- |
309 |
|
- |
4.15.9(Resistance to hot contact ) |
- |
309 |
|
- |
4.15.8(Flex resistance ) |
- |
309 |
|
- |
4.15.7(Abrasion resistance ) |
- |
309 |
|
- |
4.15.6(Tear Strength) |
- |
309 |
|
- |
4.14.5(Ageing test) |
- |
309 |
|
- |
4.14.4(Hardness (IRHD)) |
- |
309 |
|
- |
4.14.3(Density ) |
- |
309 |
|
- |
4.14.2(Thickness ) |
- |
309 |
|
- |
4.14.1(Meterial) |
- |
309 |
|
- |
4.13(Breaking Strength of thread) |
- |
309 |
|
- |
4.12.2(Tear Strength) |
- |
309 |
|
- |
4.12.1(Thickness ) |
- |
309 |
|
- |
4.11.2(Tear Strength) |
- |
309 |
|
- |
4.11.1(Thickness) |
- |
309 |
|
- |
4.10(Counter stiffener thickness) |
- |
309 |
|
- |
4.9.3(Water absorption & desorption ) |
- |
309 |
|
- |
4.9.2(Abrasion resistance ) |
- |
309 |
|
- |
4.9.1(Meterial) |
- |
309 |
|
- |
4.8.3(Water absorption & desorption ) |
- |
309 |
|
- |
4.8.2(Abrasion resistance ) |
- |
309 |
|
- |
4.8.1(Meterial) |
- |
309 |
|
- |
4.7.5(Water vapour permeability & coefficent ) |
- |
309 |
|
- |
4.7.4(Abrasion resistance ) |
- |
309 |
|
- |
4.7.3(Tear Strength) |
- |
309 |
|
- |
4.7.1(Meterial) |
- |
309 |
|
- |
4.6.4(Water penetration and water absorption) |
- |
309 |
|
- |
4.6.3(Water vapour permeability & coefficent ) |
- |
309 |
|
- |
4.6.2(Tear Strength) |
- |
309 |
|
- |
4.6.1(Thickness ) |
- |
309 |
|
- |
4.5.11(Water resistance machine method) |
- |
309 |
|
- |
4.5.11(Water Resistance Tray method ) |
- |
309 |
|
- |
4.5.11(Thickness Toe puff & counter stiffener) |
- |
309 |
|
- |
4.5.10(Energy absorption of seat region ) |
- |
309 |
|
- |
4.5.9(Cold insulation of sole complex) |
- |
309 |
|
- |
4.5.8(Heat insulation of sole complex) |
- |
309 |
|
- |
4.5.7.1(Antistatic test) |
- |
309 |
|
- |
4.5.6.4(Compression resistance) |
- |
309 |
|
- |
4.5.6.3(Impact resistance ) |
- |
309 |
|
- |
4.5.6.2(Internal Toe cap length) |
- |
309 |
|
- |
4.5.6.1(General) |
- |
309 |
|
- |
4.5.5.4(Ageing test) |
- |
309 |
|
- |
4.5.5.3(Nail penetraion Insert ) |
- |
309 |
|
- |
4.5.5.2(Flex resistance ) |
- |
309 |
|
- |
4.5.5.1(Dimension) |
- |
309 |
|
- |
4.5.4(Slip Resitance) |
- |
309 |
|
- |
4.5.3.2(Interayer bond strength) |
- |
309 |
|
- |
4.5.3.1(Upper/outsole bond strength) |
- |
309 |
|
- |
4.5.2(Ergonomic Feature) |
- |
309 |
|
- |
4.5.1(Contruction) |
- |
309 |
|
- |
4.4(Height of upper ) |
- |
309 |
|
- |
4.3.2(Weight) |
- |
309 |
|
- |
4.3.1(Size) |
- |
309 |
|
- |
4.2(Design ) |
- |
309 |
|
- |
4.1(General) |
- |
309 |
|
- |
4.9(Insocks) |
- |
309 |
|
- |
5(Chemical Requirements) |
- |
309 |
|
- |
6.1(Scale of Sampling) |
- |
309 |
|
- |
6.2(Methods of Selecting Footwear) |
- |
309 |
|
- |
6.3.1(Visual and Tactile Examination) |
- |
309 |
|
- |
6.3.2(Dimensional Characteristics) |
- |
309 |
|
- |
6.3.3.1(Tests for physical requirements) |
- |
309 |
|
- |
6.3.3.2(Tests for chemical requirements) |
- |
309 |
|
- |
7(Marking) |
- |
309 |
|
- |
4.4, Table 2(Shoe size) |
- |
309 |
|
- |
4.4, Table 2(Height) |
- |
309 |
|
- |
6.1.3, Table 3(Scale of Sampling and Permissible Number of Defectives for Tests on Whole Footwear) |
- |
309 |
|
- |
|
Complete
|
|
26 Aug, 2024 |
- |
16 |
IS 13893 (1994) |
Polyurethane soles semirigid - specification |
-
|
8000 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
4.3.2(Ageing test) |
- |
674 |
|
- |
4.3(Ross Flex test) |
- |
666 |
|
- |
4.3(Abrasion Resistance) |
- |
666 |
|
- |
4.3(Elongation at break) |
- |
666 |
|
- |
4.3(Tensile Strength ) |
- |
666 |
|
- |
4.3(Hardness Shore(A)) |
- |
666 |
|
- |
4.3(Relative density ) |
- |
666 |
|
- |
4.2(Thickness ) |
- |
666 |
|
- |
4.1(Design) |
- |
666 |
|
- |
5, 5.1, 5.2(Packing And Marking) |
- |
666 |
|
- |
Cl.5, 5.1, 5.2(Packing And Marking) |
- |
666 |
|
- |
|
Complete
|
|
26 Aug, 2024 |
- |
17 |
IS 12254 (2021) |
POLYVINYLCHLORIDE PVC INDUSTRIAL BOOTS - SPECIFICATION Second Revision |
-
|
55500 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
5.2(Size) |
- |
510 |
|
- |
5.3(Height) |
- |
510 |
|
- |
5.4.2(Ergonomic feature) |
- |
510 |
|
- |
5.4.4(Slip resistance) |
- |
510 |
|
- |
5.4.5(Leak proofness) |
- |
510 |
|
- |
5.4.6.1(Toe caps General) |
- |
510 |
|
- |
5.4.6.2(Internal length of toecaps) |
- |
510 |
|
- |
5.4.6.3(Corrosion resistance) |
- |
510 |
|
- |
5.4.6.4(Impact resistance) |
- |
510 |
|
- |
5.4.6.5(Compression resistance) |
- |
510 |
|
- |
5.4.7(Colour) |
- |
510 |
|
- |
5.5.1(Upper material) |
- |
510 |
|
- |
5.5.1(Upper Thickness) |
- |
510 |
|
- |
5.5.2(Upper tensile strength) |
- |
510 |
|
- |
5.5.3(Upper flexing) |
- |
510 |
|
- |
5.5.4(Upper Hardness) |
- |
510 |
|
- |
5.6.1(Lining material) |
- |
510 |
|
- |
5.6.2(Lining Tear strength) |
- |
510 |
|
- |
5.6.3(Lining abrasion) |
- |
510 |
|
- |
5.6.4(Lining adhesion with upper) |
- |
510 |
|
- |
5.7.1(Insole material) |
- |
510 |
|
- |
5.7.1(Insole thickness) |
- |
510 |
|
- |
5.7.2(Insole abrasion) |
- |
510 |
|
- |
5.7.3(Water absorption and desorption) |
- |
510 |
|
- |
5.8.2(Eyelets material) |
- |
510 |
|
- |
5.8.2(Lace material) |
- |
510 |
|
- |
5.8.2(Lace breaking load) |
- |
510 |
|
- |
5.9.1(Insock material) |
- |
510 |
|
- |
5.9.2(Inscok abrasion resistance) |
- |
510 |
|
- |
5.9.3(Insock water absorption and desorption) |
- |
510 |
|
- |
5.8.2(Closing thread breaking load) |
- |
510 |
|
- |
5.11.1(Outsole material) |
- |
510 |
|
- |
5.11.1(Outsole thickness) |
- |
510 |
|
- |
5.11.2(Outsole density) |
- |
510 |
|
- |
5.11.3(Outsole Interlayer bond) |
- |
510 |
|
- |
5.11.4(Outsole tear) |
- |
510 |
|
- |
5.11.5(Outsole Abrasion) |
- |
510 |
|
- |
5.11.6(Outsole hardness) |
- |
510 |
|
- |
5.11.7(Outsole flexing) |
- |
510 |
|
- |
5.4.8.1(Conductive Footwear) |
- |
510 |
|
- |
5.4.8.2(Antistatic Footwear) |
- |
510 |
|
- |
5.4.8.3.2(Penetration resistance) |
- |
510 |
|
- |
5.4.8.4(Cut resistance) |
- |
510 |
|
- |
5.5.5(Upper Cold flex resistance) |
- |
510 |
|
- |
5.4.8.5(Outsole resistance to acid and alkali) |
- |
510 |
|
- |
5.4.8.6(Outsole resistance to fuel oil) |
- |
510 |
|
- |
5.11.8(Outsole cold flex resistance) |
- |
510 |
|
- |
6.1(Volatility) |
- |
510 |
|
- |
6.2(Lead content) |
- |
510 |
|
- |
Table 1 as per IS 17011 2018(pH) |
- |
2500 |
|
- |
Table 1 as per IS 17011 2018(Phthalates (each individual phthalate)) |
- |
2500 |
|
- |
Table 1 as per IS 17011 2018(Nickel, on skin contact) |
- |
2500 |
|
- |
Table 1 as per IS 17011 2018(Allergenic and carcinogenic disperse dyes) |
- |
2500 |
|
- |
Table 1 as per IS 17011 2018(Aromatic amines released from Azo dyes (each individual amine)) |
- |
2500 |
|
- |
Table 1 as per IS 17011 2018(Aromatic amines released from Azo dyes (each individual amine)) |
- |
2500 |
|
- |
Table 1 as per IS 17011 2018(Chromium (VI)) |
- |
2500 |
|
- |
Table 1 as per IS 17011 2018(Dimethyl fumarate (DMFU)) |
- |
2500 |
|
- |
Table 1 as per IS 17011 2018(Formaldehyde (free or released by partial hydrolysis)) |
- |
2500 |
|
- |
Table 1 as per IS 17011 2018(Formaldehyde) |
- |
2500 |
|
- |
Table 1 as per IS 17011 2018(Organotin compounds) |
- |
2500 |
|
- |
Table 1 as per IS 17011 2018(PCP-TeCP-TriCP polychlorophenols) |
- |
2500 |
|
- |
5.10(Closing Thread (If used)) |
- |
510 |
|
- |
|
Complete
|
|
26 Aug, 2024 |
- |
18 |
IS 302 : Part 2 : Sec 7 (2024) |
Safety of Household And Similar Electrical Appliances Part 2 Particular Requirements Section 7: Domestic Electric Clothes Washing Machines |
-
|
55000 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
4(GENERAL REQUIREMENT) |
- |
0 |
|
- |
6(CLASSIFICATION) |
- |
100 |
|
5% Discount for BIS |
7(MARKING AND INSTRUCTIONS) |
- |
100 |
|
- |
8(PROTECTION AGAINST ACCESS TO LIVE PARTS) |
- |
600 |
|
- |
10(POWER INPUT AND CURRENT) |
- |
1500 |
|
- |
11(HEATING) |
- |
2000 |
|
- |
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE) |
- |
1000 |
|
- |
14(TRANSIENT OVERVOLTAGES) |
- |
3000 |
|
- |
15(MOISTURE RESISTANCE) |
- |
6000 |
|
- |
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH) |
- |
1000 |
|
- |
17("OVERLOAD PROTECTION OF
TRANSFORMERS AND ASSOCIATED CIRCUITS ") |
- |
250 |
|
- |
17("OVERLOAD PROTECTION OF
TRANSFORMERS AND ASSOCIATED CIRCUITS ") |
- |
250 |
|
- |
18(ENDURANCE) |
- |
10000 |
|
- |
19(ABNORMAL OPERATION) |
- |
8000 |
|
Extra EMI/EMC Charges: 180000/- |
19.11.4.1(Electrostatic discharges) |
- |
10000 |
|
- |
19.11.4.2(Radiated fields) |
- |
80000 |
|
- |
19.11.4.3(Fast transient bursts) |
- |
10000 |
|
- |
19.11.4.4(Surge immunity test) |
- |
10000 |
|
- |
19.11.4.5(Immunity to conducted discharges) |
- |
50000 |
|
- |
19.11.4.6(Class 3 Voltage dips and interruptions) |
- |
10000 |
|
- |
19.11.4.7(Harmonics) |
- |
10000 |
|
- |
20(STABILITY AND MECHANICAL HAZARDS) |
- |
2000 |
|
- |
21(MECHANICAL STRENGTH) |
- |
1500 |
|
- |
22(CONSTRUCTION) |
- |
1500 |
|
- |
23(INTERNAL WIRING) |
- |
500 |
|
- |
24(COMPONENTS) |
- |
5000 |
|
- |
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS) |
- |
4000 |
|
- |
26(TERMINALS FOR EXTERNAL CONDUCTORS) |
- |
100 |
|
- |
27(PROVISION FOR EARTHING) |
- |
500 |
|
- |
28(SCREWS AND CONNECTIONS) |
- |
100 |
|
- |
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION) |
- |
1000 |
|
- |
30(RESISTANCE TO HEAT AND FIRE) |
- |
3000 |
|
- |
31(RESISTANCE TO RUSTING) |
- |
2000 |
|
- |
4(GENERAL REQUIREMENT) |
- |
0 |
|
- |
6(CLASSIFICATION) |
- |
0 |
|
- |
7(MARKING AND INSTRUCTIONS) |
- |
0 |
|
- |
8(PROTECTION AGAINST ACCESS TO LIVE PARTS) |
- |
0 |
|
- |
10(POWER INPUT AND CURRENT) |
- |
0 |
|
- |
11(HEATING) |
- |
0 |
|
- |
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE) |
- |
0 |
|
- |
14(TRANSIENT OVERVOLTAGES) |
- |
0 |
|
- |
15(MOISTURE RESISTANCE) |
- |
0 |
|
- |
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH) |
- |
0 |
|
- |
17("OVERLOAD PROTECTION OF
TRANSFORMERS AND ASSOCIATED CIRCUITS ") |
- |
0 |
|
- |
17("OVERLOAD PROTECTION OF
TRANSFORMERS AND ASSOCIATED CIRCUITS ") |
- |
0 |
|
- |
18(ENDURANCE) |
- |
0 |
|
- |
19(ABNORMAL OPERATION) |
- |
0 |
|
- |
19.11.4.1(Electrostatic discharges) |
- |
0 |
|
- |
19.11.4.2(Radiated fields) |
- |
0 |
|
- |
19.11.4.3(Fast transient bursts) |
- |
0 |
|
- |
19.11.4.4(Surge immunity test) |
- |
0 |
|
- |
19.11.4.5(Immunity to conducted discharges) |
- |
0 |
|
- |
19.11.4.6(Class 3 Voltage dips and interruptions) |
- |
0 |
|
- |
19.11.4.7(Harmonics) |
- |
0 |
|
- |
20(STABILITY AND MECHANICAL HAZARDS) |
- |
0 |
|
- |
21(MECHANICAL STRENGTH) |
- |
0 |
|
- |
22(CONSTRUCTION) |
- |
0 |
|
- |
23(INTERNAL WIRING) |
- |
0 |
|
- |
24(COMPONENTS) |
- |
0 |
|
- |
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS) |
- |
0 |
|
- |
26(TERMINALS FOR EXTERNAL CONDUCTORS) |
- |
0 |
|
- |
27(PROVISION FOR EARTHING) |
- |
0 |
|
- |
28(SCREWS AND CONNECTIONS) |
- |
0 |
|
- |
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION) |
- |
0 |
|
- |
30(RESISTANCE TO HEAT AND FIRE) |
- |
0 |
|
- |
31(RESISTANCE TO RUSTING) |
- |
0 |
|
- |
19.13(ABNORMAL OPERATION) |
- |
0 |
|
- |
19.101(Abnormal Operation) |
- |
0 |
|
- |
19.102(Abnormal Operation) |
- |
0 |
|
- |
|
Complete
|
|
26 Aug, 2024 |
- |
19 |
IS 15844 : Part 1 (2023) |
SPORTS FOOTWEAR PART -1 GENERAL PURPOSEFirst Revision |
-
|
63085 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
Cl No.4.1(Sampling and Conditioning) |
- |
501 |
|
- |
Cl No.4.2(Construction) |
- |
501 |
|
- |
Cl No.4.3(Whole Footwear) |
- |
501 |
|
- |
4.3.1(Insole) |
- |
501 |
|
- |
4.3.2(Toe spring height) |
- |
501 |
|
- |
4.3.3(Upper to Mid Sole/Out Sole Bond Performance) |
- |
501 |
|
- |
4.3.4("Upper to Composite Sole Bond Performance
(Applicable Only When the Sole is Composite)") |
- |
501 |
|
- |
4.3.5(Out Sole to Mid Sole (Multilayer) Bond Performance) |
- |
501 |
|
- |
4.3.6(Energy Absorption at Seat Region) |
- |
501 |
|
- |
4.3.7(Complete Shoe Flexing) |
- |
501 |
|
- |
4.3.8(Washability) |
- |
501 |
|
- |
4.3.9(Slip Resistance) |
- |
501 |
|
- |
Cl No.4.4 , Table No. 2 , i) , a)(Flexing resistance, Dry condition) |
- |
501 |
|
- |
Cl No.4.4 , Table No. 2 , i) , b)(Flexing resistance, Wet condition) |
- |
501 |
|
- |
Cl No.4.4 , Table No. 2 , ii)(Tear strength (average force), Min, N) |
- |
501 |
|
- |
Cl No.4.4 , Table No. 2 , iii) , a)("Colour fastness rubbing (To and fro) Grey scale rate, Min ,
Dry: (rubbing) Rating: (Marring and staining) ") |
- |
501 |
|
- |
Cl No.4.4 , Table No. 2 , iii) , b)("Colour fastness rubbing (To and fro) Grey scale rate, Min ,
Wet: (rubbing) Rating: (Marring and staining)") |
- |
501 |
|
- |
Cl No.4.4 , Table No. 2 , iv) , a)(Water vapour permeability, mg/cm2h, Min) |
- |
501 |
|
- |
Cl No.4.4 , Table No. 2 , iv) , b)(Water vapour coefficient, mg/cm2 , Min) |
- |
501 |
|
- |
Cl No.4.4 , Table No. 2 , v)(Stitch tear strength (double hole), N/mm, Min) |
- |
501 |
|
- |
Cl No.4.4 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate,
Min Rating: (Marring)") |
- |
501 |
|
- |
Cl No.4.4 , Table No. 2 , i)(Breaking strength, N/mm, Min) |
- |
501 |
|
- |
Cl No.4.4 , Table No. 2 , ii)(Elongation at break, percent Min) |
- |
501 |
|
- |
Cl No.4.4 , Table No. 2 , iii)(Tear strength, N, Min For Fabric: For all other materials) |
- |
501 |
|
- |
Cl No.4.4 , Table No. 2 , iv) , a)(Flexing resistance, Dry condition) |
- |
501 |
|
- |
Cl No.4.4 , Table No. 2 , iv) , b)(Flexing resistance, ,Wet condition) |
- |
501 |
|
- |
Cl No.4.4 , Table No. 2 , v) , a)(Water vapour permeability, mg/cm2h, Min) |
- |
501 |
|
- |
Cl No.4.4 , Table No. 2 , v) , b)("Water vapour coefficient, mg/cm2 , Min
") |
- |
501 |
|
- |
Cl No.4.4 , Table No. 2 , vi)(Hydrolysis resistance) |
- |
501 |
|
- |
Cl No.4.4 , Table No. 2 , vii)(Bursting Strength, kg/cm2 , Min) |
- |
501 |
|
- |
Cl No.4.5 , Table No. 3 , i)(Tear strength, N, Min) |
- |
501 |
|
- |
Cl No.4.5 , Table No. 3 , ii)(Abrasion resistance, cycles) |
- |
501 |
|
- |
Cl No.4.5 , Table No. 3 , iii)("Colour fastness to rubbing (crocking), Grey scale
rate with 10 rubs on dry or wet, Min") |
- |
501 |
|
- |
Cl No.4.5 , Table No. 3 , iv)("Colour fastness to perspiration (contact method)
Grey scale rate, Min") |
- |
501 |
|
- |
Cl No.4.5 , Table No. 3 , v) , a)(Water vapour permeability, mg/cm2h, Min) |
- |
501 |
|
- |
Cl No.4.5 , Table No. 3 , v) , b)("Water vapour coefficient, mg/cm2 , Min
") |
- |
501 |
|
- |
Cl No.4.6 , Table No. 4 , i)(Thickness, mm, Min) |
- |
501 |
|
- |
Cl No.4.6 , Table No. 4 , ii)(Flexing index, Min) |
- |
501 |
|
- |
Cl No.4.6 , Table No. 4 , iii)(Abrasion resistance, at 400 cycles) |
- |
501 |
|
- |
Cl No.4.6 , Table No. 4 , iv) , a)(Water Absorption, mg/cm2 , Min) |
- |
501 |
|
- |
Cl No.4.6 , Table No. 4 , iv) , b)(Water Desorption, percent, Min) |
- |
501 |
|
- |
Cl No.4.7, Table No. 5 , i)(Thickness, mm, Min) |
- |
501 |
|
- |
Cl No.4.7, Table No. 5 , ii)(Abrasion resistance, cycles) |
- |
501 |
|
- |
Cl No.4.7, Table No. 5 , iii) , a)(Water Absorption, mg/cm2 , Min) |
- |
501 |
|
- |
Cl No.4.7, Table No. 5 , iii) , b)(Water Desorption, percent, Min) |
- |
501 |
|
- |
Cl No.4.8 , Table No. 6 , i)(Abrasion resistance (Volume loss), mm3 , Max) |
- |
501 |
|
- |
Cl No.4.8 , Table No. 6 , ii)("Flexing resistance Belt Method at 90 diameter Mandrel
or
Bennewart method, cut growth, Max") |
- |
501 |
|
- |
Cl No.4.8 , Table No. 6 , iii)("Hydrolysis resistance, cut growth after 150 000
flexes, in mm, Max") |
- |
501 |
|
- |
Cl No.4.9 , Table No. 7 , i)(Compression set, percent, Max) |
- |
501 |
|
- |
Cl No.4.9 , Table No. 7 , ii)(Split tear strength, kg/25 mm, Min) |
- |
501 |
|
- |
Cl No.4.9 , Table No. 7 , iii)(Heat shrinkage, percent, Max) |
- |
501 |
|
- |
Cl No.4.10 , Table No. 8 , i)(First dry collapsing load, hardness, N, Min) |
- |
501 |
|
- |
Cl No.4.10 , Table No. 8 , ii)(Resilience, percent, Min) |
- |
501 |
|
- |
Cl No.4.10 , Table No. 8 , iii)(Moisture resistance, percent, Min) |
- |
501 |
|
- |
Cl No.4.10 , Table No. 8 , iv) , a)(Initial dry area shape retention, percent, Min) |
- |
501 |
|
- |
Cl No.4.10 , Table No. 8 , iv) , b)(Area shape retention after 10th collapse, dry, percent, Min) |
- |
501 |
|
- |
Cl No.4.11 , Table No. 9 , i)(Peel strength, N/mm, Min) |
- |
501 |
|
- |
Cl No.4.11 , Table No. 9 , ii)(Shear strength, kPa , Min) |
- |
501 |
|
- |
Cl No.4.12 , Table No. 10 , i)(Limit of useful extension, percent, Min) |
- |
501 |
|
- |
Cl No.4.13 , Table No. 11 , i)(Breaking strength of lace, N, Min) |
- |
501 |
|
- |
Cl No.4.13 , Table No. 11 , ii)(Lace tag strength, N, Min) |
- |
501 |
|
- |
Cl No.4.13 , Table No. 11 , iii)(Lace to lace abrasion,) |
- |
501 |
|
- |
Cl No.4.13 , Table No. 11 , iv)("Colour fastness to water
Gray Scale Rate, Min Rating") |
- |
501 |
|
- |
Cl No.4.13 , Table No. 11 , v)(Strength of Buckle/Ski hook, N, Min) |
- |
501 |
|
- |
Cl No.4.13 , Table No. 11 , vi)(Corrosion resistance) |
- |
501 |
|
- |
Cl No . 4.14("Chemical Requirement on Complete Product
for all Types of Sports Shoe") |
- |
2307 |
|
- |
Cl No . 5(MARKING AND PACKING) |
- |
501 |
|
- |
Cl No . 4.14, Table no. 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes) |
- |
2307 |
|
- |
Cl No . 4.14, Table no. 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine)) |
- |
2307 |
|
- |
Cl No . 4.14, Table no. 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine)) |
- |
2307 |
|
- |
Cl No . 4.14, Table no. 1 of IS 17011(iv)(Chromium (VI)) |
- |
2307 |
|
- |
Cl No . 4.14, Table no. 1 of IS 17011(v)(Dimethyl fumarate (DMFU)) |
- |
2307 |
|
- |
Cl No . 4.14, Table no. 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis)) |
- |
2307 |
|
- |
Cl No . 4.14, Table no. 1 of IS 17011(vii)(Formaldehyde) |
- |
2307 |
|
- |
Cl No . 4.14, Table no. 1 of IS 17011(viii)(Organotin compounds) |
- |
2307 |
|
- |
Cl No . 4.14, Table no. 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols) |
- |
2307 |
|
- |
Cl No . 4.14, Table no. 1 of IS 17011(x)(pH) |
- |
2307 |
|
- |
Cl No . 4.14, Table no. 1 of IS 17011(xi)(Phthalates (each individual phthalate)) |
- |
2307 |
|
- |
Cl No . 4.14, Table no. 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB)) |
- |
2307 |
|
- |
Clause 4.2 - 4.2.1(Construction) |
- |
0 |
|
- |
Clause 4.2 - 4.2.2(Construction) |
- |
0 |
|
- |
Clause 4.3 - 4.3.1(Whole Footwear) |
- |
0 |
|
- |
Clause 4.3 - 4.3.2(Whole Footwear) |
- |
0 |
|
- |
Clause 4.3 - 4.3.3(Upper to Mid Sole/Out Sole Bond Performance) |
- |
0 |
|
- |
Clause 4.3 - 4.3.4(Upper to Composite Sole Bond Performance(Applicable Only When the Sole is Composite)) |
- |
0 |
|
- |
Clause 4.3 - 4.3.5(Out Sole to Mid Sole (Multilayer) Bond) |
- |
0 |
|
- |
Clause 4.3 - 4.3.7(Complete Shoe Flexing) |
- |
0 |
|
- |
Clause 4.4, Table 1 ii)(Tear strength) |
- |
0 |
|
- |
Clause 4.4, Table 1 iv)-a(Water Vapour Permeability) |
- |
0 |
|
- |
Clause 4.4, Table 1 iv)-b(Water Vapour Coeffecient) |
- |
0 |
|
- |
Clause 4.4, Table 1 v)(Stitch Tear Strength(Double Hole)) |
- |
0 |
|
- |
Clause 4.4, Table 2 i)(Breaking Strength) |
- |
0 |
|
- |
Clause 4.4, Table 2 ii)(Elongation at break) |
- |
0 |
|
- |
Clause 4.4, Table 2 iii)(Tear strength) |
- |
0 |
|
- |
Clause 4.4, Table 2 v)-a(Water Vapour Permeability) |
- |
0 |
|
- |
Clause 4.4, Table 2 v)-b(Water Vapour Coeffecient) |
- |
0 |
|
- |
Clause 4.5, Table 3 i)(Tear strength) |
- |
0 |
|
- |
Clause 4.5, Table 3 ii)(Abrasion Resistance) |
- |
0 |
|
- |
Clause 4.5, Table 3 v)-a(Water Vapour Permeability) |
- |
0 |
|
- |
Clause 4.5, Table 3 v)-b(Water Vapour Coeffecient) |
- |
0 |
|
- |
Clause 4.6, Table 4 i)(Thickness) |
- |
0 |
|
- |
Clause 4.6, Table 4 ii)(Abrasion Resistance) |
- |
0 |
|
- |
Clause 4.6, Table 4 iv)-a(Water Absorption) |
- |
0 |
|
- |
Clause 4.6, Table 4 iv)-b(Water Desorption) |
- |
0 |
|
- |
Clause 4.7, Table 5 i)(Thickness) |
- |
0 |
|
- |
Clause 4.7, Table 5 ii)(Abrasion Resistance) |
- |
0 |
|
- |
Clause 4.7, Table 5 iii)-a(Water Absorption) |
- |
0 |
|
- |
Clause 4.7, Table 5 iii)-b(Water Desorption) |
- |
0 |
|
- |
Clause 4.8, Table 6 i)(Abrasion Resistance) |
- |
0 |
|
- |
Clause 4.8, Table 6 ii)(Flexing Resistance) |
- |
0 |
|
- |
Clause 4.8, Table 6 iii)(Hydrolysis Resistance) |
- |
0 |
|
- |
Clause 4.9, Table 7 ii)(Split Tear strength) |
- |
0 |
|
- |
Clause 4.9, Table 7 iii)(Heat shrinkage) |
- |
0 |
|
- |
Cl-5, Table -1 S. No-(i) (Amendment No-1)(Insole) |
- |
0 |
|
- |
Cl-5, Table -1 S. No- (ii) (Amendment No-1)(Toe spring height) |
- |
0 |
|
- |
|
Complete
|
|
26 Aug, 2024 |
- |
20 |
IS 17043 : Part 2 (2024) |
Shoes: Shoes for General Purpose |
-
|
54900 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
Cl-5.1(Shape and Design) |
- |
900 |
|
- |
Cl-5.3(Material) |
- |
1000 |
|
- |
Cl-5.4 S.No (1), i(Bond strength, N/mm, Min Upper to outsole, N/mm, Min) |
- |
1000 |
|
- |
Cl-5.4, S.No (1), ii(Inter layer bond strength,= N/mm, Min Midsole to outsole, N/mm, Min) |
- |
1000 |
|
- |
Cl-5.4, S.No (1), iii(Whole shoe flexing, flexes) |
- |
1000 |
|
- |
Cl-5.4, S.No (1), iv(Water proofness on complete shoe) |
- |
1000 |
|
- |
Cl-5.4, S.No (1), v(Slip resistance, Cof(1), Min dry and wet* (quarry tile)) |
- |
1000 |
|
- |
Cl-5.4, S.No (1), vi(Attachment strength of strap and buckle/D-ring N) |
- |
1000 |
|
- |
Cl-5.4, S.No (1), vii(Attachment strength of strap and velcro , N, Min) |
- |
1000 |
|
- |
Cl-5.4, S.No (1), viii(Strength of eyelet attachment, N, Min) |
- |
1000 |
|
- |
Cl-5.4, S.No (1), ix(Heel pull off strength, N, Min) |
- |
1000 |
|
- |
Cl-5.4, S.No (1), x(Top piece attachment strength, N, Min) |
- |
1000 |
|
- |
Cl-5.4, S.No (1), xi(Seam strength, N/mm, Min) |
- |
1000 |
|
- |
Cl-5.4, S.No (1), xii(Whole shoe topline strength, N, Min) |
- |
1000 |
|
- |
Cl-5.4, S.No (1), xiii(Abrasion resistance (volume loss), mm3) |
- |
1000 |
|
- |
Cl-5.4, S.No (1), xiv(Chemical requirements(3)) |
- |
1000 |
|
- |
Cl-5.4, S.No (1), xv(Lead content (as Pb) ppm, Max) |
- |
1000 |
|
- |
Cl-5.4, S.No (1), xvi(Hydrolysis resistance,(4) cut growth at 150 000 flexes, mm, Max) |
- |
1000 |
|
- |
Cl-6.1.1, S.No (1), i(Tear trength, N) |
- |
1000 |
|
- |
Cl-6.1.1, S.No (1), ii(Flexing resistance, flexes) |
- |
1000 |
|
- |
Cl-6.1.1, S.No (1), iii(Colour fastness to rubbing (marring/staining)) |
- |
1000 |
|
- |
Cl-6.1.1, S.No (1), iv(Colour fastness to water (contact method- multi fabrics)) |
- |
1000 |
|
- |
Cl-6.1.1 S.No (1), v(Water vapour permeability,mg/cm2 /h, Min Water vapour coefficient,mg/cm2 , Min) |
- |
1000 |
|
- |
Cl-6.1.1 S.No (1), vi(Stitch tear strength, N/mm, Min) |
- |
1000 |
|
- |
Cl-6.1.1, S.No (1), vii(Abrasion resistance) |
- |
1000 |
|
- |
Cl-6.1.2, S.No (1), i(Colour fastness to light, Marring, Min) |
- |
1000 |
|
- |
Cl-6.1.2, S.No (1), ii(Water resistance) |
- |
1000 |
|
- |
Cl-6.1.2, S.No (1), iii(Flexing resistance, flexes at (-) 5 °C 25 000 flexes) |
- |
1000 |
|
- |
Cl-6.1.3, S.No (1), i(Breaking strength, N/mm, Min Elongation at break, percent, Min) |
- |
1000 |
|
- |
Cl-6.1.3, S.No (1), ii(Tear Strength, N, Min) |
- |
1000 |
|
- |
Cl-6.1.3, S.No (1), iii(Strength at needle perforation, N/mm, Min) |
- |
1000 |
|
- |
Cl-6.1.3, S.No (1), iv(Flexing resistance, Flexes) |
- |
1000 |
|
- |
Cl-6.1.3, S.No (1), v(Water vapour permeability (WVP), mg/cm2 /h, Min) |
- |
1000 |
|
- |
Cl-6.1.3, S.No (1), vi(Hydrolysis resistance) |
- |
1000 |
|
- |
Cl-6.1.3, S.No (1), vii(Abrasion resistance) |
- |
1000 |
|
- |
Cl-6.1.4, S.No (1), i(Colour fastness to light, Marring, Min) |
- |
1000 |
|
- |
Cl-6.1.4, S.No (1), ii(Flexing resistance, flexes at (-) 5 ºC, s 25 000 flexes) |
- |
1000 |
|
- |
Cl-6.2, S.No (1), i(Tear strength, N, Min) |
- |
1000 |
|
- |
Cl-6.2 S.No (1), ii(Abrasion resistance) |
- |
1000 |
|
- |
Cl-6.2 S.No (1), iii(Colour fastness rubbing (crocking)) |
- |
1000 |
|
- |
Cl-6.2, S.No (1), iv(Colour fastness to perspiration) |
- |
1000 |
|
- |
Cl-6.2, S.No (1), v(Water vapour permeability, mg/cm2 /h, Min Water vapour coefficient, mg/cm2, Min) |
- |
1000 |
|
- |
Cl-6.3, S.No (1), i(Flexing index, Min) |
- |
1000 |
|
- |
Cl-6.3, S.No (1), ii(Abrasion resistance at 400 cycles) |
- |
1000 |
|
- |
Cl-6.3, S.No (1), iii(Water absorption, mg/cm2 , Min
Water desorption, percent, Min) |
- |
1000 |
|
- |
Cl-6.4, S.No (1), i(Thickness, mm, Min) |
- |
1000 |
|
- |
Cl-6.4, S.No (1), ii(Abrasion resistance) |
- |
1000 |
|
- |
Cl-6.4, S.No (1), iii(Water absorption, mg/cm2 , Min
Water desorption, percent, Min) |
- |
1000 |
|
- |
Cl-6.5.1, S.No (1), i(Flexing resistance) |
- |
1000 |
|
- |
Cl-6.5.1, S.No (1), ii(Hydrolysis resistance, cut growth at 150 000 flexes, mm, Max) |
- |
1000 |
|
- |
Cl-6.5.1, S.No (1), iii(Compression set, percent, Max) |
- |
1000 |
|
- |
Cl-6.5.2.1, S.No (1), i(Grain crack index, Min) |
- |
1000 |
|
- |
Cl-6.5.2.1, S.No (1), ii(Density, g/cm3 , Min) |
- |
1000 |
|
- |
Cl-6.5.2.1, S.No (1), iii(Abrasion resistance, mm/kcs, Max) |
- |
1000 |
|
- |
Cl-6.5.2.2, S.No (1), i(Water resistance, (dynamic method)) |
- |
0 |
|
- |
Cl-6.5.2.3, S.No (1), i(Hardness, Min) |
- |
0 |
|
- |
Cl-6.5.2.3, S.No (1), ii(Density, g/cm3 , Max) |
- |
0 |
|
- |
Cl-6.5.2.3 S.No (1), iii(Abrasion resistance (volume loss), mm3 , Max) |
- |
0 |
|
- |
Cl-6.5.2.3, S.No (1), iv(Bond Strength between Rubber top-lift and adjacent material, N/mm, Min) |
- |
0 |
|
- |
Cl-6.6, S.No (1), i(Heat shrinkage, percent, Max) |
- |
0 |
|
- |
Cl-6.6, S.No (1), ii(Split tear strength, kg/25 mm, Min) |
- |
0 |
|
- |
Cl-6.6, S.No (1), iii(Compression set, percent, Max) |
- |
0 |
|
- |
Cl-6.7, S.No (1), i(Hardness, N) |
- |
0 |
|
- |
Cl-6.7, S.No (1), ii(Resilience, percent) |
- |
0 |
|
- |
Cl-6.7, S.No (1), iii(Moisture resistance, percent) |
- |
0 |
|
- |
Cl-6.9, S.No (1), ii(Needle strength, N/mm, Min) |
- |
0 |
|
- |
Cl-6.10, S.No (1), i(Lace breaking strength, N, Min) |
- |
0 |
|
- |
Cl-6.10, S.No (1), ii(Lace tag strength, N, Min) |
- |
0 |
|
- |
Cl-6.10, S.No (1), iii(Lace to lace abrasion resistance, cycles) |
- |
0 |
|
- |
Cl-6.10, S.No (1), iv(Colour fastness to water for lace contact methodstaining Gray scale rate , Min) |
- |
0 |
|
- |
Cl-6.10, S.No (1), v(Corrosion resistance) |
- |
0 |
|
- |
Cl-6.11, S.No (1), i(Fatigue resistance, cycles, Min) |
- |
0 |
|
- |
Cl-6.11, S.No (1), ii(Security of puller attachment strength, N, Min) |
- |
0 |
|
- |
Cl-6.11, S.No (1), iii(Lateral load, N, Min) |
- |
0 |
|
- |
Cl-6.11, S.No (1), iv(End attachment strength, N, Min) |
- |
0 |
|
- |
Cl-8.1(Marking) |
- |
0 |
|
- |
Cl-8.1(Marking) |
- |
0 |
|
- |
Cl-6.7, S.No (1), iv(Area shape retention, percent
(a) Initial, Min
b) After 10 collapsing load, Min) |
- |
0 |
|
- |
Cl-6.7, S.No (1), v(Adhesion strength, N/mm) |
- |
0 |
|
- |
Cl-6.8, S. No. (1) i(Peel strength, N/mm
a) Initial, Min
b) After 5 000 wear cycles, Min) |
- |
0 |
|
- |
Cl- 6.8, S. No. 1(ii)(a) Shear strength, kPa
b) Initial, Min) |
- |
0 |
|
- |
Cl- 6.9, S. No. (1) i(Limit of useful extension, percent,
Min) |
- |
0 |
|
- |
Cl- 6.9, S. No. (1) ii(Needle strength, N/mm, Min) |
- |
0 |
|
- |
|
Complete
|
|
26 Aug, 2024 |
- |
21 |
IS 6721 (2023) |
SANDAL AND SLIPPERS SPECIFICATION First revision |
-
|
46700 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
Cl. No.4(SHAPE AND DESIGN) |
- |
366 |
|
- |
Cl. No.5("SIZE AND FITTINGS
") |
- |
366 |
|
- |
Cl. No.6("CONSTRUCTION
") |
- |
366 |
|
- |
Cl. No.7(MATERIAL) |
- |
366 |
|
- |
Cl. No.8.1, Table no. 1(i),a("Tear strength, (other
than moulded upper material)
") |
- |
366 |
|
- |
Cl. No.8.1, Table no. 1(i),b("For all moulded upper material
") |
- |
366 |
|
- |
Cl. No.8.1, Table no. 1(ii)(Flexing endurance) |
- |
366 |
|
- |
Cl. No.8.2,Table no. 2(i)(Tear strength) |
- |
366 |
|
- |
Cl. No.8.2,Table no. 2(ii),a("Abrasion resistance-
At dry condition") |
- |
366 |
|
- |
Cl. No.8.2,Table no. 2(ii),b("Abrasion resistance-
At wet condition") |
- |
366 |
|
- |
Cl. No.8.3,Table no. 3(i)(Tear strength) |
- |
366 |
|
- |
Cl. No.8.3,Table no. 3(ii),a("Abrasion resistance-
At dry condition") |
- |
366 |
|
- |
Cl. No.8.4,Table no. 4(i)(Grain crack index) |
- |
366 |
|
- |
Cl. No.8.4,Table no. 4(ii)(Density) |
- |
366 |
|
- |
Cl. No.8.4,Table no. 4(iii)(Abrasion resistance) |
- |
366 |
|
- |
Cl. No.8.4,Table no. 5(i)(Density) |
- |
366 |
|
- |
Cl. No.8.4,Table no. 5(ii)("Abrasion resistance, Volume
loss ") |
- |
366 |
|
- |
Cl. No.8.4, Table no. 5(iii)("Flexing resistance, At 30 000
flexes") |
- |
366 |
|
- |
Cl. No.8.5, Table no. 6(i)("Bond strength, N/mm, Min
(Applicable when fore part is fully covered or strap
width is more than 25 mm)") |
- |
366 |
|
- |
Cl. No.8.5, Table no. 6(ii)("Toe post attachment strength, N, Min
(Applicable if toe post is present)") |
- |
366 |
|
- |
Cl. No.8.5, Table no. 6(iii)("Toe ring attachment strength, Min
(Applicable if toe ring is not integral part of upper") |
- |
366 |
|
- |
Cl. No.8.5, Table no. 6(iv)(Strap to outsole strength) |
- |
366 |
|
- |
Cl. No.8.5, Table no. 6(v)("Attachment strength of back strap and
Buckle/D-ring ") |
- |
366 |
|
- |
Cl. No.8.5, Table no. 6(vi)("Attachment strength of elastic, limit of useful
extension, percent") |
- |
366 |
|
- |
Cl. No.8.5, Table no. 6(vii)("Attachment strength of back strap and velcro, N,
Min (If, present)") |
- |
366 |
|
- |
Cl. No.8.5, Table no. 6(viii)("Hydrolysis resistance,
Cut growth after 150 000 flexes, mm, Max
(Applicable for PU sole only)") |
- |
366 |
|
- |
Cl. No.8.5, Table no. 6(ix)("Heel pull off strength, N, Min
(Applicable for heel height 40 mm and above
attached separately to the sandal/slipper)") |
- |
366 |
|
- |
Cl. No.8.5, Table no. 6(x)("Inter layer bond strength, N/mm,
(Applicable for multi-layer sole)") |
- |
366 |
|
- |
Cl. No.8.5, Table no. 6(xi)("Slip Resistance, Coefficient of Friction (COF)
(Not applicable for leather sole)
(To be carried out on quarry tiles)") |
- |
366 |
|
- |
Cl. No.8.("Requirement of Complete Sandal and Slipper
(Chemical Requirements) ") |
- |
2307 |
|
- |
Cl. No.9.(MARKING AND PACKING) |
- |
366 |
|
- |
Cl. No.8.6.1,Table 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes) |
- |
2307 |
|
- |
Cl. No.8.6.1,Table 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine)) |
- |
2307 |
|
- |
Cl. No.8.6.1,Table 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine)) |
- |
2307 |
|
- |
Cl. No.8.6.1,Table 1 of IS 17011(iv)(Chromium (VI)) |
- |
2307 |
|
- |
Cl. No.8.6.1,Table 1 of IS 17011(v)(Dimethyl fumarate (DMFU)) |
- |
2307 |
|
- |
Cl. No.8.6.1,Table 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis)) |
- |
2307 |
|
- |
Cl. No.8.6.1,Table 1 of IS 17011(vii)(Formaldehyde) |
- |
2307 |
|
- |
Cl. No.8.6.1,Table 1 of IS 17011(viii)(Organotin compounds) |
- |
2307 |
|
- |
Cl. No.8.6.1,Table 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols) |
- |
2307 |
|
- |
Cl. No.8.6.1,Table 1 of IS 17011(x)(pH) |
- |
2307 |
|
- |
Cl. No.8.6.1,Table 1 of IS 17011(xi)(Phthalates (each individual phthalate)) |
- |
2307 |
|
- |
Cl. No.8.6.1,Table 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB)) |
- |
2307 |
|
- |
Cl. No.8.6.2(Lead content) |
- |
366 |
|
- |
Cl. No.8.3,Table no. 3(ii),b("Abrasion resistance-
At wet condition") |
- |
0 |
|
- |
Cl-5 ((Amendment No-1)(Category And Type) |
- |
0 |
|
- |
Cl.8 Table-1 S.No 1, (i) (Amendment No-1)(Bond strength , N/mm, Min) |
- |
0 |
|
- |
Cl.8 Table-1 S.No 1, (ii) (Amendment No-1)(Toe post attachment strength) |
- |
0 |
|
- |
Cl.8 Table-1 S.No 1, (iii) (Amendment No-1)(Toe ring attachment strength) |
- |
0 |
|
- |
Cl.8 Table-1 S.No 1, (iv) (Amendment No-1)(Strap to outsole strength N, Min) |
- |
0 |
|
- |
Cl.8 Table-1 S.No 1, (v) (Amendment No-1)(Attachment strength of back strap and buckle/D-ring N, Min) |
- |
0 |
|
- |
Cl.8 Table-1 S.No 1, (vi) (Amendment No-1)(Limit of useful extension, percent, Min) |
- |
0 |
|
- |
Cl.8 Table-1 S.No 1, (vii) (Amendment No-1)(Attachment strength of back strap and velcro, N, Mi) |
- |
0 |
|
- |
Cl.8 Table-1 S.No 1, (viii) (Amendment No-1)(Hydrolysis resistance) |
- |
0 |
|
- |
Cl.8 Table-1 S.No 1, (ix) (Amendment No-1)(Heel pull off strength) |
- |
0 |
|
- |
Cl.8 Table-1 S.No 1, (x) (Amendment No-1)(Inter layer bond strength) |
- |
0 |
|
- |
Cl.8 Table-1 S.No 1, (xi) (Amendment No-1)(Slip resistance, coefficient of friction (COF)3) |
- |
0 |
|
- |
Cl.8 Table-1 S.No 1, (xii) (Amendment No-1)(Abrasion resistance, (volume loss) mm3 , Max) |
- |
0 |
|
- |
Cl.8 Table-1 S.No 1, (xiii) (Amendment No-1)("Flexing resistance (Belt method or
Bennewart flex method)") |
- |
0 |
|
- |
Cl.8 Table-1 S.No 1, (xiv) (Amendment No-1)(Chemical Requirements) |
- |
0 |
|
- |
Cl.8 Table-1 S.No 1, (xv) (Amendment No-1)(Lead content (as Pb)7 ppm) |
- |
0 |
|
- |
Cl.9 Table-2 S.No 1, (i) a (Amendment No-1)(Tear strength for other than moulded upper material) |
- |
0 |
|
- |
Cl.9 Table-2 S.No 1, (i) b (Amendment No-1)(Tear strength For all moulded upper material) |
- |
0 |
|
- |
Cl.9 Table-2 S.No 1, (ii) (Amendment No-1)(Flexing endurance) |
- |
0 |
|
- |
Cl.9 Table-3 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min) |
- |
0 |
|
- |
Cl.9 Table-3 S.No 1, (ii) (Amendment No-1)("Abrasion resistance
(a) dry condition
(b) wet condition") |
- |
0 |
|
- |
Cl.9 Table-4 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min) |
- |
0 |
|
- |
Cl.9 Table-4 S.No 1, (ii) (Amendment No-1)("Abrasion resistance
(a) dry condition
(b) wet condition") |
- |
0 |
|
- |
Cl.9 Table-5 S.No 1, (i) (Amendment No-1)(Grain crack index) |
- |
0 |
|
- |
Cl.9 Table-5 S.No 1, (ii) (Amendment No-1)(Density, g/cm3 , Min) |
- |
0 |
|
- |
Cl.9 Table-5 S.No 1, (iii) (Amendment No-1)(Abrasion resistance, mm/kcs) |
- |
0 |
|
- |
Cl.9 Table-6 S.No 1, (i) (Amendment No-1)("Density, g/cm3 , Min
(a)-Cellular, (b) Solid
") |
- |
0 |
|
- |
Cl-10 (Amendment No-1)(Marking) |
- |
0 |
|
- |
|
Complete
|
|
26 Aug, 2024 |
- |
22 |
IS 10702 (2023) |
Hawai Chappal-Specification |
-
|
45525 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
4.1(Material) |
- |
817 |
|
- |
4.2(Length) |
- |
817 |
|
- |
4.3(Thickness) |
- |
817 |
|
- |
4.4 , Table No. 1 , i)(Density) |
- |
817 |
|
- |
4.4 , Table No. 1 , ii)(2Compression set at constant stress) |
- |
817 |
|
- |
4.4 , Table No. 1 , iii)(3Split tear strength) |
- |
817 |
|
- |
4.4 , Table No. 1 , iv)("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material,
Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber") |
- |
817 |
|
- |
4.4 , Table No. 1 , v)(5Abrasion resistance at applied force) |
- |
817 |
|
- |
4.4 , Table No. 1 , vi)(Flexing resistance: Maximum cut growth at 50 000 flexes) |
- |
817 |
|
- |
4.4 , Table No. 1 , vii)(7 Hydrolysis resistance, Maximum cut growth at 50 000 flexes) |
- |
817 |
|
- |
4.4 , Table No . 2 , i)(Density , Solid strap, Cellular strap) |
- |
817 |
|
- |
4.4 , Table No . 2 , ii)("Breaking strength , Strap to strap and
Toe portion to strap , Elongation at break") |
- |
817 |
|
- |
4.4 , Table No . 2 , iii)(Minimum cross section of the stud) |
- |
817 |
|
- |
4.4 , Table No . 2 , iv)(Stud bolt) |
- |
817 |
|
- |
4.4 , Table No . 3 , i)(Toe post attachment strength) |
- |
817 |
|
- |
4.4 , Table No . 3 , ii)(Attachment strength of rear strap) |
- |
817 |
|
- |
4.4 , Table No . 3 , iii)(Inter layer bond strength) |
- |
817 |
|
- |
5(CHEMICAL REQUIREMENT FOR HAWAI CHAPPAL) |
- |
2307 |
|
- |
6(MARKING AND PACKING) |
- |
817 |
|
- |
Cl. No.5.1,Table no.1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes) |
- |
2307 |
|
- |
Cl. No.5.1,Table no.1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine)) |
- |
2307 |
|
- |
Cl. No.5.1,Table no.1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine)) |
- |
2307 |
|
- |
Cl. No.5.1,Table no.1 of IS 17011(iv)(Chromium (VI)) |
- |
2307 |
|
- |
Cl. No.5.1,Table no.1 of IS 17011(v)(Dimethyl fumarate (DMFU)) |
- |
2307 |
|
- |
Cl. No.5.1,Table no.1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis)) |
- |
2307 |
|
- |
Cl. No.5.1,Table no.1 of IS 17011(vii)(Formaldehyde) |
- |
2307 |
|
- |
Cl. No.5.1,Table no.1 of IS 17011(viii)(Organotin compounds) |
- |
2307 |
|
- |
Cl. No.5.1,Table no.1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols) |
- |
2307 |
|
- |
Cl. No.5.1,Table no.1 of IS 17011(x)(pH) |
- |
2307 |
|
- |
Cl. No.5.1,Table no.1 of IS 17011(xi)(Phthalates (each individual phthalate)) |
- |
2307 |
|
- |
Cl. No.5.1,Table no.1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB)) |
- |
2307 |
|
- |
Cl.No. 5.2(lead content) |
- |
817 |
|
- |
Clause 4.1 - 4.1.1(Bottom Material) |
- |
0 |
|
- |
Clause 4.1 - 4.1.2(Strap Material) |
- |
0 |
|
- |
Clause 4.1 - 4.1.3(Material) |
- |
0 |
|
- |
Clause 4.1 - 4.1.4(Material) |
- |
0 |
|
- |
Clause 4.2(Material) |
- |
0 |
|
- |
Clause 4.3 - 4.3.1(Thickness) |
- |
0 |
|
- |
Clause 4.3 - 4.3.2(Thickness) |
- |
0 |
|
- |
Clause 4.4 Table 1 -i)(Density, g/cm3, Min) |
- |
0 |
|
- |
Clause 4.4 Table 1 -iii)(Split tear strength, kg, Min) |
- |
0 |
|
- |
Clause 4.4 Table 1 -iv) - a("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, percent,
Max") |
- |
0 |
|
- |
Clause 4.4 Table 1 -iv) - b(Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber, percent, Max) |
- |
0 |
|
- |
Clause 4.4 Table 1 -v)(Abrasion resistance at applied force 5 N) |
- |
0 |
|
- |
Clause 4.4 Table 2 -i) - a("Density, g/cm3
Solid strap
") |
- |
0 |
|
- |
Clause 4.4 Table 2 -i) - b(Density, g/cm3 Cellular strap) |
- |
0 |
|
- |
Clause 4.4 Table 2 -ii) - a - 1("Breaking strength, kgf, Min
Strap to strap(Solid Strap)") |
- |
0 |
|
- |
Clause 4.4 Table 2 -ii) - a - 2("Breaking strength, kgf, Min
Strap to strap(Cellular Strap)") |
- |
0 |
|
- |
Clause 4.4 Table 2 -ii) - a - 3("Breaking strength, kgf, Min
Toe portion to strap(Solid Strap)") |
- |
0 |
|
- |
Clause 4.4 Table 2 -ii) - a - 4("Breaking strength, kgf, Min
Toe portion to strap(Cellular Strap)") |
- |
0 |
|
- |
Clause 4.4 Table 2 -ii) - b - 1("Elongation at break, percent
(Applicable to strap to strap
(V shape) Solid Strap") |
- |
0 |
|
- |
Clause 4.4 Table 2 -ii) - b - 2("Elongation at break, percent
(Applicable to strap to strap
(V shape) Cellular Strap") |
- |
0 |
|
- |
Clause 4.4 Table 2 -iii) - a("Minimum cross section of the
stud, mm,
Size 1 to 13 (Adult)") |
- |
0 |
|
- |
Clause 4.4 Table 2 -iii) - b("Minimum cross section of the
stud, mm,
Size 3 to 13 (Children)") |
- |
0 |
|
- |
Clause 4.4 Table 2 -iv) - a("Stud bolt, mm
Diameter/edge to edge length") |
- |
0 |
|
- |
Clause 4.4 Table 2 -iv) - b("Stud bolt, mm
Thickness") |
- |
0 |
|
- |
Clause 4.4 Table 3 -i)("Toe post attachment strength, N,
Min") |
- |
0 |
|
- |
Clause 4.4 Table 3 -ii)("Attachment strength of rear strap,
N, Min") |
- |
0 |
|
- |
Clause 4.4 Table 3 -iii)("Inter layer bond strength, N/mm,
Min") |
- |
0 |
|
- |
Cl-4 ((Amendment No-1)(Category And Type) |
- |
0 |
|
- |
Cl-4.4, Table -1 S. No-1 (i) (Amendment No-1)(Compression set at constant stress) |
- |
0 |
|
- |
Cl-4.4, Table -1 S. No-1 (ii) (Amendment No-1)(Split tear strength) |
- |
0 |
|
- |
Cl-4.4, Table -1 S. No-1 (iii) (a)(Amendment No-1)("Shrinkage at Shrinkage at 50 °C ± 1 °C for 2 h for polymeric material, percent, Max
") |
- |
0 |
|
- |
Cl-4.4, Table -1 S. No-1 (iii)(b) (Amendment No-1)(Shrinkage at 100 °C ± 1 °C for 1 h for rubber, percent, Max) |
- |
0 |
|
- |
Cl-4.4, Table -1 S. No-1 (iv) (Amendment No-1)(Abrasion resistance at applied force) |
- |
0 |
|
- |
Cl-4.4, Table -1 S. No-1 (v) (Amendment No-1)(Flexing resistance: Maximum cut growth,) |
- |
0 |
|
- |
Cl-4.4, Table -1 S. No-1 (vi) (Amendment No-1)(Hydrolysis resistance:Maximum cut growth) |
- |
0 |
|
- |
Cl-4.4, Table -1 S. No-1 (vii) (Amendment No-1)(Chemical requirements) |
- |
0 |
|
- |
Cl-4.4, Table -1 S. No-1 (viii) (Amendment No-1)("Lead content (as Pb),
ppm, Max") |
- |
0 |
|
- |
Cl-4.4, Table -2 S. No-1 (i), a (Amendment No-1)("Breaking strength for Strap to strap
1-Solid strap
2-Cellular strap") |
- |
0 |
|
- |
Cl-4.4, Table -2 S. No-1 (i), b (Amendment No-1)("Breaking strength for Toe portion to strap
1-Solid strap
2-Cellular strap") |
- |
0 |
|
- |
Cl-4.4, Table -2 S. No-1 (i), c (Amendment No-1)("Elongation at break , percent, Min
1-Solid strap
2-Cellular strap") |
- |
0 |
|
- |
Cl-4.4, Table -2 S. No-1 (ii), (Amendment No-1)(Chemical requirements) |
- |
0 |
|
- |
Cl-4.4, Table -2 S. No-1 (iii), (Amendment No-1)(Lead content (as Pb), in ppm, Max) |
- |
0 |
|
- |
Cl-4.4, Table -3 S. No-1 (i), (Amendment No-1)(Toe post attachment strength) |
- |
0 |
|
- |
Cl-4.4, Table -3 S. No-1 (ii), (Amendment No-1)(Attachment strength of rear strap) |
- |
0 |
|
- |
Cl-4.4, Table -3 S. No-1 (iii), (Amendment No-1)(Inter layer bond strength) |
- |
0 |
|
- |
|
Complete
|
|
26 Aug, 2024 |
- |
23 |
IS 1364 : Part 2 (2023) |
Hexagon head bolts screws and nuts of product grades A and B Part 2 Hexagon head screws (Size range M1.6 to M64 ) (Sixth revision of IS 1364 (Part 2)) |
-
|
25000 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
Cl-4(Dimensions) |
- |
2000 |
|
- |
Cl-5, Table-5(General requirements) |
- |
2000 |
|
- |
Cl-5, Table-5(Thread-Tolerance class) |
- |
2000 |
|
- |
Cl-5, Table-5(Mechanical properties-Steel) |
- |
2000 |
|
- |
Cl-5, Table-5(Mechanical properties-Stainless steel) |
- |
2000 |
|
- |
Cl-5, Table-5(Tolerances- Product grade) |
- |
2000 |
|
- |
Cl-5, Table-5(Surface condition -Electroplated coatings) |
- |
2000 |
|
- |
Cl-5, Table-5(Surface condition- Non-electrolytically applied zinc flake) |
- |
2000 |
|
- |
Cl-5, Table-5(Surface condition - Hot dip galvanized coatings) |
- |
2000 |
|
- |
Cl-5, Table-5("Surface integrity
-Limits for surface discontinuities") |
- |
2000 |
|
- |
Cl-6(Marking) |
- |
2000 |
|
- |
Cl-4(Dimensions) |
- |
2000 |
|
- |
Cl-5, Table-5(General requirements) |
- |
1000 |
|
- |
Cl-5, Table-5(Thread-Tolerance class) |
- |
0 |
|
- |
Cl-5, Table-5(Mechanical properties-Steel) |
- |
0 |
|
- |
Cl-5, Table-5(Mechanical properties-Stainless steel) |
- |
0 |
|
- |
Cl-5, Table-5(Tolerances- Product grade) |
- |
0 |
|
- |
Cl-5, Table-5(Surface condition -Electroplated coatings) |
- |
0 |
|
- |
Cl-5, Table-5(Surface condition- Non-electrolytically applied zinc flake) |
- |
0 |
|
- |
Cl-5, Table-5(Surface condition - Hot dip galvanized coatings) |
- |
0 |
|
- |
Cl-5, Table-5("Surface integrity
-Limits for surface discontinuities") |
- |
0 |
|
- |
Cl-6(Marking) |
- |
0 |
|
- |
Cl-4(Dimensions) |
- |
0 |
|
- |
Cl-5, Table-5(General requirements) |
- |
0 |
|
- |
Cl-5, Table-5(Thread-Tolerance class) |
- |
0 |
|
- |
Cl-5, Table-5(Mechanical properties-Steel) |
- |
0 |
|
- |
Cl-5, Table-5(Mechanical properties-Stainless steel) |
- |
0 |
|
- |
Cl-5, Table-5(Tolerances- Product grade) |
- |
0 |
|
- |
Cl-5, Table-5(Surface condition -Electroplated coatings) |
- |
0 |
|
- |
Cl-5, Table-5(Surface condition- Non-electrolytically applied zinc flake) |
- |
0 |
|
- |
Cl-5, Table-5(Surface condition - Hot dip galvanized coatings) |
- |
0 |
|
- |
Cl-5, Table-5("Surface integrity
-Limits for surface discontinuities") |
- |
0 |
|
- |
Cl-6(Marking) |
- |
0 |
|
- |
|
Complete
|
|
26 Aug, 2024 |
- |
24 |
IS 1364 : Part 1 (2023) |
Hexagon head bolts, screws, and nuts of property grades A and B: Part 1 Hexagon head bolts (Size range M1.6 to M64) (sixth revision) |
-
|
25000 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
Cl-4(Dimensions) |
- |
2000 |
|
- |
Cl-5, Table-7(General requirements) |
- |
2000 |
|
- |
Cl-5, Table-7(Thread-Tolerance class) |
- |
2000 |
|
- |
Cl-5, Table-7(Mechanical properties- Steel) |
- |
2000 |
|
- |
Cl-5, Table-7(Mechanical properties-Stainless steel) |
- |
2000 |
|
- |
Cl-5, Table-7(Tolerances-Product grade) |
- |
2000 |
|
- |
Cl-5, Table-7(Surface condition -Electroplated coatings) |
- |
2000 |
|
- |
Cl-5, Table-7(Surface condition- Non-electrolytically applied zinc flake) |
- |
2000 |
|
- |
Cl-5, Table-7(Surface condition - Hot dip galvanized coatings) |
- |
2000 |
|
- |
Cl-5, Table-7(Surface integrity- Limits for surface discontinuities) |
- |
2000 |
|
- |
Cl-6(Marking) |
- |
2000 |
|
- |
Cl-4(Dimensions) |
- |
2000 |
|
- |
Cl-5, Table-7(General requirements) |
- |
1000 |
|
- |
Cl-5, Table-7(Thread-Tolerance class) |
- |
0 |
|
- |
Cl-5, Table-7(Mechanical properties- Steel) |
- |
0 |
|
- |
Cl-5, Table-7(Mechanical properties-Stainless steel) |
- |
0 |
|
- |
Cl-5, Table-7(Tolerances-Product grade) |
- |
0 |
|
- |
Cl-5, Table-7(Surface condition -Electroplated coatings) |
- |
0 |
|
- |
Cl-5, Table-7(Surface condition- Non-electrolytically applied zinc flake) |
- |
0 |
|
- |
Cl-5, Table-7(Surface condition - Hot dip galvanized coatings) |
- |
0 |
|
- |
Cl-5, Table-7(Surface integrity- Limits for surface discontinuities) |
- |
0 |
|
- |
Cl-6(Marking) |
- |
0 |
|
- |
Cl-4(Dimensions) |
- |
0 |
|
- |
Cl-5, Table-7(General requirements) |
- |
0 |
|
- |
Cl-5, Table-7(Thread-Tolerance class) |
- |
0 |
|
- |
Cl-5, Table-7(Mechanical properties- Steel) |
- |
0 |
|
- |
Cl-5, Table-7(Mechanical properties-Stainless steel) |
- |
0 |
|
- |
Cl-5, Table-7(Tolerances-Product grade) |
- |
0 |
|
- |
Cl-5, Table-7(Surface condition -Electroplated coatings) |
- |
0 |
|
- |
Cl-5, Table-7(Surface condition- Non-electrolytically applied zinc flake) |
- |
0 |
|
- |
Cl-5, Table-7(Surface condition - Hot dip galvanized coatings) |
- |
0 |
|
- |
Cl-5, Table-7(Surface integrity- Limits for surface discontinuities) |
- |
0 |
|
- |
Cl-6(Marking) |
- |
0 |
|
- |
Cl-4(Dimensions) |
- |
- |
|
- |
Cl-5, Table-7(General requirements) |
- |
- |
|
- |
Cl-5, Table-7(Thread-Tolerance class) |
- |
- |
|
- |
Cl-5, Table-7(Mechanical properties- Steel) |
- |
- |
|
- |
Cl-5, Table-7(Mechanical properties-Stainless steel) |
- |
- |
|
- |
Cl-5, Table-7(Tolerances-Product grade) |
- |
- |
|
- |
Cl-5, Table-7(Surface condition -Electroplated coatings) |
- |
- |
|
- |
Cl-5, Table-7(Surface condition- Non-electrolytically applied zinc flake) |
- |
- |
|
- |
Cl-5, Table-7(Surface condition - Hot dip galvanized coatings) |
- |
- |
|
- |
Cl-5, Table-7(Surface integrity- Limits for surface discontinuities) |
- |
- |
|
- |
Cl-6(Marking) |
- |
- |
|
- |
|
Complete
|
|
26 Aug, 2024 |
- |
25 |
IS 383 (2016) |
Coarse and Fine Aggregate for Concrete - Specification (Third Revision) |
-
|
12500 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
5.4.1 (a)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value) |
- |
500 |
|
- |
5.4.1 (b)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value) |
- |
500 |
|
- |
5.4.2(a)( Aggregates Impact Value) |
- |
500 |
|
- |
5.4.2(b)( Aggregates Impact Value) |
- |
500 |
|
- |
5.4.3(a)( Aggregate Abrasion Value) |
- |
500 |
|
- |
5.4.3(b)( Aggregate Abrasion Value) |
- |
500 |
|
- |
6.1-Table 7(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Nominal Size of aggregate) |
- |
500 |
|
- |
6.1-Table 7(i)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 80 mm sieve ) |
- |
500 |
|
- |
6.1-Table 7(ii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 63 mm sieve ) |
- |
500 |
|
- |
6.1-Table 7(iii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 40 mm sieve ) |
- |
500 |
|
- |
6.1-Table 7(iv)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 20 mm sieve ) |
- |
500 |
|
- |
6.1-Table 7(v)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 16 mm sieve ) |
- |
500 |
|
- |
6.1-Table 7(vi)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 12.5 mm sieve ) |
- |
500 |
|
- |
6.1-Table 7(vii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 10 mm sieve ) |
- |
500 |
|
- |
6.1-Table 7(viii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 4.75 mm sieve ) |
- |
500 |
|
- |
6.1-Table 7(ix)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 2.36 mm sieve ) |
- |
500 |
|
- |
6.1.1-Table 8(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Class) |
- |
500 |
|
- |
6.1.1-Table 8(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Size) |
- |
500 |
|
- |
6.1.1-Table 8(i)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 160 mm Sieve) |
- |
500 |
|
- |
6.1.1-Table 8(i)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 80 mm Sieve) |
- |
500 |
|
- |
6.1.1-Table 8(ii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 80 mm Sieve) |
- |
500 |
|
- |
6.1.1-Table 8(ii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 40 mm Sieve) |
- |
500 |
|
- |
6.1.1-Table 8(iii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 40 mm Sieve) |
- |
500 |
|
- |
6.1.1-Table 8(iii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 20 mm Sieve) |
- |
500 |
|
- |
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 20 mm Sieve) |
- |
500 |
|
- |
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 4.75 mm Sieve) |
- |
0 |
|
- |
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 2.36 mm Sieve) |
- |
0 |
|
- |
6.2-Table 7(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Nominal Size of aggregate) |
- |
0 |
|
- |
6.2-Table 7(i)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 80 mm sieve) |
- |
0 |
|
- |
6.2-Table 7(ii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 63 mm sieve) |
- |
0 |
|
- |
6.2-Table 7(iii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 40 mm sieve) |
- |
0 |
|
- |
6.2-Table 7(iv)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 20 mm sieve) |
- |
0 |
|
- |
6.2-Table 7(v)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 16 mm sieve) |
- |
0 |
|
- |
6.2-Table 7(vi)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 12.5 mm sieve) |
- |
0 |
|
- |
6.2-Table 7(vii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 10 mm sieve) |
- |
0 |
|
- |
6.2-Table 7(viii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 4.75 mm sieve) |
- |
0 |
|
- |
6.2-Table 7(ix)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 2.36 mm sieve) |
- |
0 |
|
- |
6.3-Table 9(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Grading Zone) |
- |
0 |
|
- |
6.3-Table 9(i)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 10mm Sieve ) |
- |
0 |
|
- |
6.3-Table 9(ii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 4.75mm Sieve ) |
- |
0 |
|
- |
6.3-Table 9(iii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 2.36mm Sieve ) |
- |
0 |
|
- |
6.3-Table 9(iv)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 1.18mm Sieve ) |
- |
0 |
|
- |
6.3-Table 9(v)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 600µm Sieve ) |
- |
0 |
|
- |
6.3-Table 9(vi)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 300µm Sieve ) |
- |
0 |
|
- |
6.3-Table 9(vii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 150µm Sieve ) |
- |
0 |
|
- |
6.4-Table 10(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Nominal Size ) |
- |
0 |
|
- |
6.4-Table 10(i)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 80mm Sieve ) |
- |
0 |
|
- |
6.4-Table 10(ii)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 40mm Sieve ) |
- |
0 |
|
- |
6.4-Table 10(iii)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 20mm Sieve ) |
- |
0 |
|
- |
6.4-Table 10(iv)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 4.75mm Sieve ) |
- |
0 |
|
- |
6.4-Table 10(v)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 600µm Sieve ) |
- |
0 |
|
- |
6.4-Table 10(vi)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 150µm Sieve ) |
- |
0 |
|
- |
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(fine aggregate)) |
- |
0 |
|
- |
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (fine aggregate)) |
- |
0 |
|
- |
5.7-Table-3-(III) IS:14959 (P-2)(Water soluble chloride content (fine aggregate)) |
- |
0 |
|
- |
5.7-Table-3-(II) IS:4032(Total sulphate content (fine aggregate)) |
- |
0 |
|
- |
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (fine aggregate)) |
- |
0 |
|
- |
5.5-IS: 2386 (P-5)(Soundness (fine aggregate)) |
- |
0 |
|
- |
5.2- TABLE-2- (Note-3) IS-2386 (P-2)(Mica content (fine aggregate)) |
- |
0 |
|
- |
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Effect of organic impurities on strength of mortar (fine aggregate)) |
- |
0 |
|
- |
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Effect of organic impurities on strength of mortar (fine aggregate)) |
- |
0 |
|
- |
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Organic impurities (fine aggregate)) |
- |
0 |
|
- |
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (fine aggregate)) |
- |
0 |
|
- |
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (fine aggregate)) |
- |
0 |
|
- |
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (fine aggregate )) |
- |
0 |
|
- |
5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (fine aggregate )) |
- |
0 |
|
- |
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(coarse aggregate)) |
- |
0 |
|
- |
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (coarse aggregate)) |
- |
0 |
|
- |
5.7-Table-3-(III) BN EN: 1744(Water soluble chloride content (coarse aggregate)) |
- |
0 |
|
- |
5.7-Table-3-(II) BN EN: 1744(Total sulphate content (coarse aggregate)) |
- |
0 |
|
- |
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (coarse aggregate)) |
- |
0 |
|
- |
5.5-IS: 2386 (P-5)(Soundness (coarse aggregate)) |
- |
0 |
|
- |
5.3-IS: 2386 (P-1)(Combined elongation & flakiness index (coarse aggregate)) |
- |
0 |
|
- |
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (coarse aggregate)) |
- |
0 |
|
- |
5.2- TABLE-2- (iv) IS-2386 (P-2)(Soft fragments (coarse aggregate)) |
- |
0 |
|
- |
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (coarse aggregate)) |
- |
0 |
|
- |
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (coarse aggregate )) |
- |
0 |
|
- |
5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (coarse aggregate )) |
- |
0 |
|
- |
5.5(Soundness By Magnesium Sulphate) |
- |
0 |
|
- |
7.2(Moisture Content) |
- |
0 |
|
- |
7.2(Bulking Of Fine Aggregate) |
- |
0 |
|
- |
7.2(Bulk Density loose) |
- |
0 |
|
- |
7.2(Bulk Density Rodded) |
- |
0 |
|
- |
5.5(Soundness By Magnesium Sulphate) |
- |
0 |
|
- |
7.2(Moisture Content) |
- |
0 |
|
- |
7.2(Bulk Density loose) |
- |
0 |
|
- |
7.2(Bulk Density Rodded) |
- |
0 |
|
- |
5.3(Elongation Index) |
- |
0 |
|
- |
5.3(Flakiness Index) |
- |
0 |
|
- |
5.6(Alkali Agregate Reaction ) |
- |
0 |
|
- |
5.7 table 3(WaterAbsorption) |
- |
0 |
|
- |
5.7 table 3(Specific Gravity) |
- |
0 |
|
- |
5.3(Flakiness & Elongation) |
- |
0 |
|
- |
5.5 Na2so4/5.5.1 Maso4/5.5.1 (Soundness) |
- |
0 |
|
- |
5.7 table 4 (Calcium oxide) |
- |
0 |
|
- |
5.5 Na2so4/5.5.1 Maso4/5.5.1 (Soundness) |
- |
0 |
|
- |
5.2 (5.2.2, 5.2.1, 5.2.3, shale table-2 ) (Deleterious material (Clay lumps, coal & lignite, material finer than 75 micron IS sieve, Soft fragments,shale)) |
- |
0 |
|
- |
3.2.2
Table 3 ii)
IS 1963(Basicity as CaO/SiO2) |
- |
0 |
|
- |
Clause 5.7- Table 3 (i) (TotalAlkali content as Na2O equivalent ) |
- |
0 |
|
- |
Clause 5.6(Nature of Aggregate) |
- |
0 |
|
- |
Clause 5.6(Dissolved Silica) |
- |
0 |
|
- |
Clause 5.6(Reduction in Alkalinity) |
- |
0 |
|
- |
Clause 5.1(General) |
- |
0 |
|
- |
Clause 5.1(General) |
- |
0 |
|
- |
Table 4 Cl. 5.7 (ii)(Total Sulphur as S) |
- |
0 |
|
- |
Table 4 Cl. 5.7 (iii)(Total iron as FeO) |
- |
0 |
|
- |
Table 5 Cl. 5.7 (i)(Calcium oxide as CaO,) |
- |
0 |
|
- |
Table 5 Cl. 5.7 (ii)(Magnesium oxide as MgO) |
- |
0 |
|
- |
Table 5 Cl. 5.7 (iii)(Total iron as FeO) |
- |
0 |
|
- |
Table 5 Cl. 5.7 (iv)(Basicity as CaO/SiO2) |
- |
0 |
|
- |
Table 6 Cl. 5.7 (i)(Calcium oxide as CaO) |
- |
0 |
|
- |
Table 6 Cl. 5.7 (ii)(Total sulphur as S) |
- |
0 |
|
- |
Table 6 Cl. 5.7 (iii)(Total iron as FeO) |
- |
0 |
|
- |
Table 6 Cl. 5.7 (iv)() |
- |
0 |
|
- |
Table 6 Cl. 5.7 (iv)() |
- |
0 |
|
- |
5.4.1 (a)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value) |
- |
- |
|
- |
5.4.1 (b)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value) |
- |
- |
|
- |
5.4.2(a)( Aggregates Impact Value) |
- |
- |
|
- |
5.4.2(b)( Aggregates Impact Value) |
- |
- |
|
- |
5.4.3(a)( Aggregate Abrasion Value) |
- |
- |
|
- |
5.4.3(b)( Aggregate Abrasion Value) |
- |
- |
|
- |
6.1-Table 7(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Nominal Size of aggregate) |
- |
- |
|
- |
6.1-Table 7(i)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 80 mm sieve ) |
- |
- |
|
- |
6.1-Table 7(ii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 63 mm sieve ) |
- |
- |
|
- |
6.1-Table 7(iii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 40 mm sieve ) |
- |
- |
|
- |
6.1-Table 7(iv)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 20 mm sieve ) |
- |
- |
|
- |
6.1-Table 7(v)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 16 mm sieve ) |
- |
- |
|
- |
6.1-Table 7(vi)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 12.5 mm sieve ) |
- |
- |
|
- |
6.1-Table 7(vii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 10 mm sieve ) |
- |
- |
|
- |
6.1-Table 7(viii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 4.75 mm sieve ) |
- |
- |
|
- |
6.1-Table 7(ix)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 2.36 mm sieve ) |
- |
- |
|
- |
6.1.1-Table 8(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Class) |
- |
- |
|
- |
6.1.1-Table 8(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Size) |
- |
- |
|
- |
6.1.1-Table 8(i)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 160 mm Sieve) |
- |
- |
|
- |
6.1.1-Table 8(i)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 80 mm Sieve) |
- |
- |
|
- |
6.1.1-Table 8(ii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 80 mm Sieve) |
- |
- |
|
- |
6.1.1-Table 8(ii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 40 mm Sieve) |
- |
- |
|
- |
6.1.1-Table 8(iii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 40 mm Sieve) |
- |
- |
|
- |
6.1.1-Table 8(iii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 20 mm Sieve) |
- |
- |
|
- |
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 20 mm Sieve) |
- |
- |
|
- |
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 4.75 mm Sieve) |
- |
- |
|
- |
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 2.36 mm Sieve) |
- |
- |
|
- |
6.2-Table 7(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Nominal Size of aggregate) |
- |
- |
|
- |
6.2-Table 7(i)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 80 mm sieve) |
- |
- |
|
- |
6.2-Table 7(ii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 63 mm sieve) |
- |
- |
|
- |
6.2-Table 7(iii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 40 mm sieve) |
- |
- |
|
- |
6.2-Table 7(iv)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 20 mm sieve) |
- |
- |
|
- |
6.2-Table 7(v)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 16 mm sieve) |
- |
- |
|
- |
6.2-Table 7(vi)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 12.5 mm sieve) |
- |
- |
|
- |
6.2-Table 7(vii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 10 mm sieve) |
- |
- |
|
- |
6.2-Table 7(viii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 4.75 mm sieve) |
- |
- |
|
- |
6.2-Table 7(ix)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 2.36 mm sieve) |
- |
- |
|
- |
6.3-Table 9(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Grading Zone) |
- |
- |
|
- |
6.3-Table 9(i)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 10mm Sieve ) |
- |
- |
|
- |
6.3-Table 9(ii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 4.75mm Sieve ) |
- |
- |
|
- |
6.3-Table 9(iii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 2.36mm Sieve ) |
- |
- |
|
- |
6.3-Table 9(iv)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 1.18mm Sieve ) |
- |
- |
|
- |
6.3-Table 9(v)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 600µm Sieve ) |
- |
- |
|
- |
6.3-Table 9(vi)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 300µm Sieve ) |
- |
- |
|
- |
6.3-Table 9(vii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 150µm Sieve ) |
- |
- |
|
- |
6.4-Table 10(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Nominal Size ) |
- |
- |
|
- |
6.4-Table 10(i)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 80mm Sieve ) |
- |
- |
|
- |
6.4-Table 10(ii)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 40mm Sieve ) |
- |
- |
|
- |
6.4-Table 10(iii)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 20mm Sieve ) |
- |
- |
|
- |
6.4-Table 10(iv)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 4.75mm Sieve ) |
- |
- |
|
- |
6.4-Table 10(v)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 600µm Sieve ) |
- |
- |
|
- |
6.4-Table 10(vi)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 150µm Sieve ) |
- |
- |
|
- |
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(fine aggregate)) |
- |
- |
|
- |
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (fine aggregate)) |
- |
- |
|
- |
5.7-Table-3-(III) IS:14959 (P-2)(Water soluble chloride content (fine aggregate)) |
- |
- |
|
- |
5.7-Table-3-(II) IS:4032(Total sulphate content (fine aggregate)) |
- |
- |
|
- |
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (fine aggregate)) |
- |
- |
|
- |
5.5-IS: 2386 (P-5)(Soundness (fine aggregate)) |
- |
- |
|
- |
5.2- TABLE-2- (Note-3) IS-2386 (P-2)(Mica content (fine aggregate)) |
- |
- |
|
- |
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Effect of organic impurities on strength of mortar (fine aggregate)) |
- |
- |
|
- |
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Effect of organic impurities on strength of mortar (fine aggregate)) |
- |
- |
|
- |
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Organic impurities (fine aggregate)) |
- |
- |
|
- |
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (fine aggregate)) |
- |
- |
|
- |
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (fine aggregate)) |
- |
- |
|
- |
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (fine aggregate )) |
- |
- |
|
- |
5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (fine aggregate )) |
- |
- |
|
- |
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(coarse aggregate)) |
- |
- |
|
- |
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (coarse aggregate)) |
- |
- |
|
- |
5.7-Table-3-(III) BN EN: 1744(Water soluble chloride content (coarse aggregate)) |
- |
- |
|
- |
5.7-Table-3-(II) BN EN: 1744(Total sulphate content (coarse aggregate)) |
- |
- |
|
- |
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (coarse aggregate)) |
- |
- |
|
- |
5.5-IS: 2386 (P-5)(Soundness (coarse aggregate)) |
- |
- |
|
- |
5.3-IS: 2386 (P-1)(Combined elongation & flakiness index (coarse aggregate)) |
- |
- |
|
- |
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (coarse aggregate)) |
- |
- |
|
- |
5.2- TABLE-2- (iv) IS-2386 (P-2)(Soft fragments (coarse aggregate)) |
- |
- |
|
- |
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (coarse aggregate)) |
- |
- |
|
- |
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (coarse aggregate )) |
- |
- |
|
- |
5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (coarse aggregate )) |
- |
- |
|
- |
5.5(Soundness By Magnesium Sulphate) |
- |
- |
|
- |
7.2(Moisture Content) |
- |
- |
|
- |
7.2(Bulking Of Fine Aggregate) |
- |
- |
|
- |
7.2(Bulk Density loose) |
- |
- |
|
- |
7.2(Bulk Density Rodded) |
- |
- |
|
- |
5.5(Soundness By Magnesium Sulphate) |
- |
- |
|
- |
7.2(Moisture Content) |
- |
- |
|
- |
7.2(Bulk Density loose) |
- |
- |
|
- |
7.2(Bulk Density Rodded) |
- |
- |
|
- |
5.3(Elongation Index) |
- |
- |
|
- |
5.3(Flakiness Index) |
- |
- |
|
- |
5.6(Alkali Agregate Reaction ) |
- |
- |
|
- |
5.7 table 3(WaterAbsorption) |
- |
- |
|
- |
5.7 table 3(Specific Gravity) |
- |
- |
|
- |
5.3(Flakiness & Elongation) |
- |
- |
|
- |
5.5 Na2so4/5.5.1 Maso4/5.5.1 (Soundness) |
- |
- |
|
- |
5.7 table 4 (Calcium oxide) |
- |
- |
|
- |
5.5 Na2so4/5.5.1 Maso4/5.5.1 (Soundness) |
- |
- |
|
- |
5.2 (5.2.2, 5.2.1, 5.2.3, shale table-2 ) (Deleterious material (Clay lumps, coal & lignite, material finer than 75 micron IS sieve, Soft fragments,shale)) |
- |
- |
|
- |
3.2.2
Table 3 ii)
IS 1963(Basicity as CaO/SiO2) |
- |
- |
|
- |
Clause 5.7- Table 3 (i) (TotalAlkali content as Na2O equivalent ) |
- |
- |
|
- |
Clause 5.6(Nature of Aggregate) |
- |
- |
|
- |
Clause 5.6(Dissolved Silica) |
- |
- |
|
- |
Clause 5.6(Reduction in Alkalinity) |
- |
- |
|
- |
Clause 5.1(General) |
- |
- |
|
- |
Clause 5.1(General) |
- |
- |
|
- |
Table 4 Cl. 5.7 (ii)(Total Sulphur as S) |
- |
- |
|
- |
Table 4 Cl. 5.7 (iii)(Total iron as FeO) |
- |
- |
|
- |
Table 5 Cl. 5.7 (i)(Calcium oxide as CaO,) |
- |
- |
|
- |
Table 5 Cl. 5.7 (ii)(Magnesium oxide as MgO) |
- |
- |
|
- |
Table 5 Cl. 5.7 (iii)(Total iron as FeO) |
- |
- |
|
- |
Table 5 Cl. 5.7 (iv)(Basicity as CaO/SiO2) |
- |
- |
|
- |
Table 6 Cl. 5.7 (i)(Calcium oxide as CaO) |
- |
- |
|
- |
Table 6 Cl. 5.7 (ii)(Total sulphur as S) |
- |
- |
|
- |
Table 6 Cl. 5.7 (iii)(Total iron as FeO) |
- |
- |
|
- |
Table 6 Cl. 5.7 (iv)() |
- |
- |
|
- |
Table 6 Cl. 5.7 (iv)() |
- |
- |
|
- |
|
Complete
|
|
26 Aug, 2024 |
- |
26 |
IS 456 (2000) |
Plain and reinforced concrete - Code of practice (Fourth Revision) |
-
|
3100 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
5.4-Table-1 (v)-IS: 3025(P-17)(Suspended matter) |
- |
100 |
|
10% DISCOUNT TO BIS |
5.4-Table-1 (iv)-IS: 3025(P-32)(Chloride) |
- |
200 |
|
10% DISCOUNT TO BIS |
5.4-Table-1 (iii)-IS: 3025(P-32)(Chloride) |
- |
200 |
|
10% DISCOUNT TO BIS |
5.4-Table-1 (ii)-IS: 3025(P-24)(Sulphate) |
- |
200 |
|
10% DISCOUNT TO BIS |
5.4-Table-1 (i)-IS: 3025(P-18)(In-Organic) |
- |
200 |
|
10% DISCOUNT TO BIS |
5.4-Table-1 (i)-IS: 3025(P-18)(Organic ) |
- |
200 |
|
10% DISCOUNT TO BIS |
5.4.2-IS: 3025(P-11)(Ph) |
- |
200 |
|
10% DISCOUNT TO BIS |
5.4-(b)-IS: 3025 (P-23)(Volume of 0.02 N H2SO4 to neutralized 100 ml of water using mixed indicator) |
- |
200 |
|
10% DISCOUNT TO BIS |
5.4-(a)-IS: 3025 (P-22)(Volume of 0.02 N NaOH to neutralized 100 ml of water using phenolphthalein indicator) |
- |
200 |
|
10% DISCOUNT TO BIS |
Cl 5.4 Table 1 (v)(Suspended Matter) |
- |
200 |
|
10% DISCOUNT TO BIS |
Cl 5.4 Table 1 (iv)(Chloride) |
- |
200 |
|
10% DISCOUNT TO BIS |
Cl 5.4 Table 1 (iii)(Sulphate) |
- |
200 |
|
10% DISCOUNT TO BIS |
Cl 5.4 Table 1 (ii)(Inorganic Solids) |
- |
200 |
|
10% DISCOUNT TO BIS |
Cl 5.4 Table 1 (i)(Organic Solids) |
- |
200 |
|
10% DISCOUNT TO BIS |
Cl 5.4 .2(pH) |
- |
200 |
|
10% DISCOUNT TO BIS |
Cl 5.4 (b)(Alkalinity) |
- |
100 |
|
10% DISCOUNT TO BIS |
Cl 5.4 (a)(Acidity) |
- |
100 |
|
10% DISCOUNT TO BIS |
16.1(Average Compressive Strength) |
- |
0 |
|
10% DISCOUNT TO BIS |
16.1(Compressive Strength of Individual Samples ) |
- |
0 |
|
10% DISCOUNT TO BIS |
16.1(Compressive Strength of Individual Samples ) |
- |
0 |
|
10% DISCOUNT TO BIS |
16.1(Compressive Strength of Individual Samples ) |
- |
0 |
|
10% DISCOUNT TO BIS |
Clause 5.4(Description) |
- |
0 |
|
10% DISCOUNT TO BIS |
5.1(Cement) |
- |
0 |
|
10% DISCOUNT TO BIS |
5.6(Reinforcement) |
- |
0 |
|
10% DISCOUNT TO BIS |
5.3(Aggregates) |
- |
0 |
|
10% DISCOUNT TO BIS |
5.7(Storage of Materials) |
- |
0 |
|
10% DISCOUNT TO BIS |
7(Workability of Concrete) |
- |
0 |
|
10% DISCOUNT TO BIS |
8(Durability of concrete) |
- |
0 |
|
10% DISCOUNT TO BIS |
9(Concrete mix proportioning) |
- |
0 |
|
10% DISCOUNT TO BIS |
16.2(Flexural Strength) |
- |
0 |
|
10% DISCOUNT TO BIS |
17.4(Core test) |
- |
0 |
|
10% DISCOUNT TO BIS |
cl 5.4.4.3(Initial Setting Time) |
- |
0 |
|
10% DISCOUNT TO BIS |
cl 5.4.4.3(Initial Setting Time) |
- |
0 |
|
10% DISCOUNT TO BIS |
5.4-Table-1 (v)-IS: 3025(P-17)(Suspended matter) |
- |
- |
|
- |
5.4-Table-1 (iv)-IS: 3025(P-32)(Chloride) |
- |
- |
|
- |
5.4-Table-1 (iii)-IS: 3025(P-32)(Chloride) |
- |
- |
|
- |
5.4-Table-1 (ii)-IS: 3025(P-24)(Sulphate) |
- |
- |
|
- |
5.4-Table-1 (i)-IS: 3025(P-18)(In-Organic) |
- |
- |
|
- |
5.4-Table-1 (i)-IS: 3025(P-18)(Organic ) |
- |
- |
|
- |
5.4.2-IS: 3025(P-11)(Ph) |
- |
- |
|
- |
5.4-(b)-IS: 3025 (P-23)(Volume of 0.02 N H2SO4 to neutralized 100 ml of water using mixed indicator) |
- |
- |
|
- |
5.4-(a)-IS: 3025 (P-22)(Volume of 0.02 N NaOH to neutralized 100 ml of water using phenolphthalein indicator) |
- |
- |
|
- |
Cl 5.4 Table 1 (v)(Suspended Matter) |
- |
- |
|
- |
Cl 5.4 Table 1 (iv)(Chloride) |
- |
- |
|
- |
Cl 5.4 Table 1 (iii)(Sulphate) |
- |
- |
|
- |
Cl 5.4 Table 1 (ii)(Inorganic Solids) |
- |
- |
|
- |
Cl 5.4 Table 1 (i)(Organic Solids) |
- |
- |
|
- |
Cl 5.4 .2(pH) |
- |
- |
|
- |
Cl 5.4 (b)(Alkalinity) |
- |
- |
|
- |
Cl 5.4 (a)(Acidity) |
- |
- |
|
- |
16.1(Average Compressive Strength) |
- |
- |
|
- |
16.1(Compressive Strength of Individual Samples ) |
- |
- |
|
- |
16.1(Compressive Strength of Individual Samples ) |
- |
- |
|
- |
16.1(Compressive Strength of Individual Samples ) |
- |
- |
|
- |
Clause 5.4(Description) |
- |
- |
|
- |
5.1(Cement) |
- |
- |
|
- |
5.6(Reinforcement) |
- |
- |
|
- |
5.3(Aggregates) |
- |
- |
|
- |
5.7(Storage of Materials) |
- |
- |
|
- |
7(Workability of Concrete) |
- |
- |
|
- |
8(Durability of concrete) |
- |
- |
|
- |
9(Concrete mix proportioning) |
- |
- |
|
- |
16.2(Flexural Strength) |
- |
- |
|
- |
17.4(Core test) |
- |
- |
|
- |
cl 5.4.4.3(Initial Setting Time) |
- |
- |
|
- |
cl 5.4.4.3(Initial Setting Time) |
- |
- |
|
- |
|
Complete
|
|
26 Aug, 2024 |
- |
27 |
IS 17190 (2020) |
Grouts for Filling of Joints of Tiles and Stones - Specification |
-
|
40000 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
5-Table 1-(i)(Linear shrinkage, percent, Max) |
- |
5000 |
|
- |
5-Table 1-(ii)(Water absorption after 30 min, percent, Max) |
- |
5000 |
|
- |
5-Table 1-(iii)(Water absorption after 240 min, percent, Max (optional)) |
- |
5000 |
|
- |
5-Table 1-(iv)(Compressive strength, MPa, Min) |
- |
5000 |
|
- |
5-Table 1-(v)(Flexural strength, MPa, Min) |
- |
5000 |
|
- |
5-Table 1-(vi)(Abrasion resistance, percent, Max) |
- |
5000 |
|
- |
5-Table 1-(vii)(Chemical resistance (optional)) |
- |
5000 |
|
- |
5-Table 1-(viii)(Transverse deformation, mm, Min) |
- |
5000 |
|
- |
6(Packing) |
- |
0 |
|
- |
7(Marking) |
- |
0 |
|
- |
5-Table 1-(i)(Linear shrinkage, percent, Max) |
- |
0 |
|
- |
5-Table 1-(ii)(Water absorption after 30 min, percent, Max) |
- |
0 |
|
- |
5-Table 1-(iii)(Water absorption after 240 min, percent, Max (optional)) |
- |
0 |
|
- |
5-Table 1-(iv)(Compressive strength, MPa, Min) |
- |
0 |
|
- |
5-Table 1-(v)(Flexural strength, MPa, Min) |
- |
0 |
|
- |
5-Table 1-(vi)(Abrasion resistance, percent, Max) |
- |
0 |
|
- |
5-Table 1-(vii)(Chemical resistance (optional)) |
- |
0 |
|
- |
5-Table 1-(viii)(Transverse deformation, mm, Min) |
- |
0 |
|
- |
6(Packing) |
- |
0 |
|
- |
7(Marking) |
- |
0 |
|
- |
|
Complete
|
|
26 Aug, 2024 |
- |
28 |
IS 17263 (2022) |
Textiles - Polyester staples fibres - Specification (first revision) |
-
|
45750 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
4.2(Classification (IS 17263)) |
- |
2500 |
|
- |
5(Identification (IS 17263)) |
- |
2500 |
|
- |
6 & Table-3(Mean Linear Density (IS 234)) |
- |
500 |
|
- |
6 & Table-3(Cut Length (IS 10014 Part-1)) |
- |
1250 |
|
- |
6 & Table-3(Average Elongation at Break (IS 235)) |
- |
1250 |
|
- |
6 & Table-3(Average Tenacity (IS 235)) |
- |
1250 |
|
- |
6 & Table-3(Hollowness (IS 17263)) |
- |
500 |
|
- |
6 & Table-3(Crimp Reoval (For filing nonwoven Fiber Only) (IS 17263)) |
- |
500 |
|
- |
6 & Table-3(Sinking Time (For spun lace fiber only)(IS 17263)) |
- |
500 |
|
- |
6 & Table-4(Moisture Regain (IS 17263)) |
- |
2500 |
|
- |
6 & Table-4(Isophthalic Acid (IS 16481)) |
- |
2500 |
|
- |
6 & Table-4(Phosphorus Content (IS 17263)) |
- |
2500 |
|
- |
6 & Table-4(Ultraviolet Resistence (IS 13162 Part-2)) |
- |
4000 |
|
- |
6 & Table-4(Water Soluble Matter (IS 3456)) |
- |
2500 |
|
- |
6 & Table-4(Anti Microbial activity Value (IS/ISO 20743)) |
- |
2500 |
|
- |
6 & Table-4(Silicon Content (IS 17263)) |
- |
1500 |
|
- |
6 & Table-4(Colour strength with reference to standard shade (IS 17263)) |
- |
1250 |
|
- |
6 & Table-4(Colour difference with reference to standard shade (IS 17263)) |
- |
1250 |
|
- |
6 & Table-4(L Colour Value (IS 17263)) |
- |
1000 |
|
- |
6 & Table-4(Whiteness Index (IS 17263)) |
- |
1000 |
|
- |
6 & Table-4(Resistance to ageing (fibres in sheet form at 40ºC for 168 h) (IS 7016Part-8)) |
- |
2000 |
|
- |
6 & Table-4(Dry heat (hot air) shrinkage at 180ºC, for 30 min (IS 17263)) |
- |
1000 |
|
- |
6 & Table-4(Commercial Mass (IS 7703 Part-3)) |
- |
3000 |
|
- |
6.4 & Table 6(Colour Fastness to Light (IS/ISO 105-B01)) |
- |
4000 |
|
- |
6.4 & Table 6(Colour Fastness to Washing (IS/ISO 105-C10)) |
- |
2500 |
|
- |
6.4 & Table 6(Colour Fastness to Rubbing (IS/ISO 105-X12)) |
- |
0 |
|
- |
6.4 & Table 6("Colour Fastness to Perspiration (acidic and
alkaline) (IS/ISO 105-E04)") |
- |
0 |
|
- |
6.6 & Table-7(Free and releasable formaldehyde,) |
- |
0 |
|
- |
6.6 & Table-7(Extractable heavy metals by artificial Acidic sweat/saliva (IS 15651)) |
- |
0 |
|
- |
6.6 & Table-7(Mercury (IS 15651)) |
- |
0 |
|
- |
6.6 & Table-7(b) Chromium III (IS 15651)) |
- |
0 |
|
- |
6.6 & Table-7(c) Chromium VI (IS 15651)) |
- |
0 |
|
- |
6.6 & Table-7(d) Lead (IS 15651)) |
- |
0 |
|
- |
6.6 & Table-7(e) Cadmium (IS 15651)) |
- |
0 |
|
- |
6.6 & Table-7(f) Copper (IS 15651)) |
- |
0 |
|
- |
6.6 & Table-7(g) Antimony (IS 15651)) |
- |
0 |
|
- |
6.6 & Table-7(Pentachlorophenol (IS 15651)) |
- |
0 |
|
- |
6.6 & Table-7(Pesticides (Sum parameter) (IS 15651)) |
- |
0 |
|
- |
6.6 & Table-7(Banned pesticides (IS 15651)) |
- |
0 |
|
- |
6.6 & Table-7(Banned azo colourants (arylamines) (IS 15570)) |
- |
0 |
|
- |
8(Marking (IS 17263)) |
- |
0 |
|
- |
6.2(Freedom from Major Defects) |
- |
0 |
|
- |
6.3(Lustre/Brightness) |
- |
0 |
|
- |
6.4- Table -6, Sl no. 2 (a)(Washing, Change in colour IS/ISO 105-C10) |
- |
0 |
|
- |
6.4- Table -6, Sl no. 2 (b)(Washing, Staining IS/ISO 105-C11) |
- |
0 |
|
- |
6.4- Table -6, Sl no. 3 (a)(Rubbing, Dry IS/ISO 105-X12) |
- |
0 |
|
- |
6.4- Table -6, Sl no. 3 (b)(Rubbing, Wet IS/ISO 105-X13) |
- |
0 |
|
- |
6.4- Table -6, Sl no. 4 (a)(Perspiration (acidic and alkaline), chenge in colour IS/ISO 105-E04) |
- |
0 |
|
- |
6.4- Table -6, Sl no. 4 (b)(Perspiration (acidic and alkaline), staining IS/ISO 105-E05) |
- |
0 |
|
- |
6.1 Table 4(Moisture regain % Max at equilibrium condition) |
- |
0 |
|
- |
6.2 Table 4(Colour Strength with reference to standard yarn, %) |
- |
0 |
|
- |
6.1 Table 4(Phosphorus content) |
- |
0 |
|
- |
6.1 Table 4(Water soluble matter %) |
- |
0 |
|
- |
6.1 Table 4(Colour strength with reference to std shade %) |
- |
0 |
|
- |
6.1 Table 4(Colour difference with ref to std shade measured asDE) |
- |
0 |
|
- |
6.1 Table 4(L colour value %) |
- |
0 |
|
- |
6.1 Table 3(Sinking time, s) |
- |
0 |
|
- |
6.1 Table 4(Whiteness index) |
- |
0 |
|
- |
6.4 Table 6(Colour Fastness to light) |
- |
0 |
|
- |
6.4 Table 6(Colour Fastness to washing , test 2) |
- |
0 |
|
- |
6.4 Table 6(Colour Fastness to Rubbing) |
- |
0 |
|
- |
6.4 Table 6(Colour Fastness to perspiration) |
- |
0 |
|
- |
6.1 Table 3(Mean Linear Density ,Denier) |
- |
0 |
|
- |
6.1 Table 3(Cut Length) |
- |
0 |
|
- |
6.1 Table 3(Average elongation at break, %) |
- |
0 |
|
- |
6.1 Table 3(Average tenacity,gpd) |
- |
0 |
|
- |
6.1 Table 3(Hollowness, %) |
- |
0 |
|
- |
6.1 Table 3(Crimp removal %) |
- |
0 |
|
- |
6.1 Table 3(Sinking time,s) |
- |
0 |
|
- |
|
Complete
|
|
26 Aug, 2024 |
- |
29 |
IS 17265 (2022) |
Textiles - 100 Percent polyester spun grey and white yarns - Specification (first revision) |
-
|
55700 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
4(Classification (IS 17265)) |
- |
2500 |
|
- |
5(Designation and description (IS 17265)) |
- |
2500 |
|
- |
5.2.1(Microscopic and dissolution test (IS 667)) |
- |
1500 |
|
- |
5.2.1(Microscopic and dissolution test (IS 667)) |
- |
2500 |
|
- |
5.2.1(Melting Point (16481)) |
- |
1500 |
|
- |
6 & Table 3(Mean linear density(Count) (IS 1315)) |
- |
1500 |
|
- |
6 & Table 3(CV (IS 1315)) |
- |
1000 |
|
- |
6 & Table 3(CV (IS 1315)) |
- |
2500 |
|
- |
6 & Table 3(Twist per meter (IS 832 Part-1 & 2)) |
- |
2700 |
|
- |
6 & Table 3(CV (IS 832 Part-1 & 2)) |
- |
2700 |
|
- |
6 & Table 3(Single Yarn tenacity (RKM) (IS 1670)) |
- |
2500 |
|
- |
6 & Table 3(CV (IS 1670)) |
- |
10000 |
|
- |
6 & Table 3(Elongation (IS 1670)) |
- |
2800 |
|
- |
6 & Table 3(CV (IS 1670)) |
- |
2500 |
|
- |
6 & Table 3(Coungth Strength Product (CSP) (IS 1671)) |
- |
2000 |
|
- |
6 & Table 3(Yarn Hairiness index (IS 17265)) |
- |
2500 |
|
- |
6 & Table 3(Yarn Hairiness index (IS 17265)) |
- |
2000 |
|
- |
6 & Table 3(Whiteness Index of polyester spun yarn (IS17263)) |
- |
2500 |
|
- |
6 & Table 4(Moisture regain (IS 17265)) |
- |
1500 |
|
- |
6 & Table 4(Isophthalic acid (IPA) content (IS 16481)) |
- |
2500 |
|
- |
6 & Table 4(Isophthalic acid (IPA) content (IS 16481)) |
- |
4000 |
|
- |
6 & Table 4(Water soluble matter (IS 3456)) |
- |
0 |
|
- |
6 & Table 4(Phosphorus content (IS 17265)) |
- |
0 |
|
- |
6 & Table 4(Ultraviolet resistance (IS 13162 Part2)) |
- |
0 |
|
- |
6 & Table 4(Anti-microbial activity value (IS/ISO 20743)) |
- |
0 |
|
- |
6 & Table 4(Wettability of woven or knitted fabrics (about 150 gsm) made from the yarn (IS 2349)) |
- |
0 |
|
- |
6 & Table 4(Wicking characteristic of woven or knitted fabrics (about 150 gsm) made from the yarn (IS 17265)) |
- |
0 |
|
- |
6.2.1(tenacity of multifold yarn including double yarn (IS 17265)) |
- |
0 |
|
- |
6.2.2(Resultant count of yarn and CV percentage (IS 1315)) |
- |
0 |
|
- |
6.3(Freedom from Defects (IS 17265)) |
- |
0 |
|
- |
6.4 & table 5(Yarn Unevenness and Yarn Imperfections) |
- |
0 |
|
- |
6.4 & table 5(U Percent) |
- |
0 |
|
- |
6.4 & table 5(CV) |
- |
0 |
|
- |
6.7 & Table 7(Colour Fastness Rating To Washing Change in colour (IS/ISO 105-C10)) |
- |
0 |
|
- |
6.7 & Table 7(Colour Fastness Rating To Washing Staining (IS/ISO 105-C10)) |
- |
0 |
|
- |
6.7 & Table 7(Colour Fastness Rating To Rubbing Dry (IS/ISO 105-X12)) |
- |
0 |
|
- |
6.7 & Table 7(Colour Fastness Rating To Rubbing Wet (IS/ISO 105-X12)) |
- |
0 |
|
- |
6.7 & Table 7(Colour Fastness Rating To Perspiration (acidic and alkaline) Change in colour (IS/ISO 105-E04)) |
- |
0 |
|
- |
6.7 & Table 7(Colour Fastness Rating To Perspiration (acidic and alkaline) Staining (IS/ISO 105-E04)) |
- |
0 |
|
- |
6.8 & Table 8(Free and releasable formaldehyde (IS 14563 (Part 1) and IS 14563 (Part 2))) |
- |
0 |
|
- |
6.8 & Table 8(Mercury (IS 15651)) |
- |
0 |
|
- |
6.8 & Table 8(Chromium III (IS 15651)) |
- |
0 |
|
- |
6.8 & Table 8(Chromium VI (IS 15651)) |
- |
0 |
|
- |
6.8 & Table 8(Lead (IS 15651)) |
- |
0 |
|
- |
6.8 & Table 8(Cadmium) |
- |
0 |
|
- |
6.8 & Table 8(Cadmium) |
- |
0 |
|
- |
6.8 & Table 8(Copper (IS 15651)) |
- |
0 |
|
- |
6.8 & Table 8(Antimony (IS 15651)) |
- |
0 |
|
- |
6.8 & Table 8(Pentachlorophenol (IS 15651)) |
- |
0 |
|
- |
6.8 & Table 8(Pesticides (sum parameter) (IS 15651)) |
- |
0 |
|
- |
6.8 & Table 8(Banned pesticides (IS 15651)) |
- |
0 |
|
- |
6.8 & Table 8(Banned azo colourants (arylamines) (IS 15570)) |
- |
0 |
|
- |
8.1(Marking (IS 17265)) |
- |
0 |
|
- |
6.1 Table 3(White index of poyster spun yarrn) |
- |
0 |
|
- |
6.1 Table 4(Moisture Regain , %) |
- |
0 |
|
- |
6.1 Table 4(Water soluble matter %) |
- |
0 |
|
- |
6.1 Table 4(Phosphorus content %) |
- |
0 |
|
- |
6.1 Table 7(Colour Fastness to light) |
- |
0 |
|
- |
6.1 Table 7(Colour Fastness to washing , test 2) |
- |
0 |
|
- |
6.1 Table 7(Colour Fastness to perspiration) |
- |
0 |
|
- |
6.1 Table 7(Colour Fastness to Rubbing) |
- |
0 |
|
- |
6.2 Table 4(Moisture Regain , %) |
- |
0 |
|
- |
6.2 Table 4(Water soluble matter %) |
- |
0 |
|
- |
6.2 Table 4(Colour difference with ref to std yarn measured asDE) |
- |
0 |
|
- |
6.1 Table 3(Finish Oil Pickup, %) |
- |
0 |
|
- |
6.1 Table 4(Moisture Regain , %) |
- |
0 |
|
- |
6.1 Table 4(Phosporus content , %) |
- |
0 |
|
- |
6.1 Table 3(Mean Linear Density (Count),Ne) |
- |
0 |
|
- |
6.1 Table 3(Twist per metre,Average) |
- |
0 |
|
- |
6.1 Table 3 100 Percent Polyester Spun Grey and White Yarns -Specification(Single Yarn Tenacity (RKM),g/tex) |
- |
0 |
|
- |
6.1 Table 3(Elongation %) |
- |
0 |
|
- |
6.1 Table 3(Count Strength Product (CSP)) |
- |
0 |
|
- |
6.1 Table 3(Yarn hairiness index) |
- |
0 |
|
- |
6.1 Table 5(Uneveness (U %)) |
- |
0 |
|
- |
|
Complete
|
|
26 Aug, 2024 |
- |
30 |
IS 17264 (2022) |
Textiles - Polyester industrial yarn - Specification (first revision) |
-
|
46400 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
4(Designation of Yarn (IS 17264)) |
- |
2500 |
|
- |
1(Microscopic and dissolution (IS 667)) |
- |
2500 |
|
- |
5.2.1 a(melting point) |
- |
2500 |
|
- |
5.2.1 b(Staining Test (IS 667)) |
- |
2500 |
|
- |
5.2.2 & Table-1(Classification (IS 17264)) |
- |
2500 |
|
- |
5.2.2 & Table-1(Identification) |
- |
2500 |
|
- |
6.3(Freedom from defects (IS 17264)) |
- |
3000 |
|
- |
6.1 & Table-3(Linear Density (IS 7703 Part-1)) |
- |
2500 |
|
- |
6.1 & Table-3(Tenacity (IS 7703 Part-2)) |
- |
2500 |
|
- |
6.1 & Table-3(Elongation (IS 7703 Part-2)) |
- |
5000 |
|
- |
6.1 & Table-3(Hot Air Shrinkage (IS 17264)) |
- |
4500 |
|
- |
6.2 & Table-4(Moisture regain (IS 17264)) |
- |
4500 |
|
- |
6.2 & Table-4(Isophthalic acid (IPA) content (IS 16481)) |
- |
3400 |
|
- |
6.2 & Table-4(Water soluble matter (IS 3456)) |
- |
4000 |
|
- |
6.2 & Table-4(Finish oil pick-up (IS 17264)) |
- |
2000 |
|
- |
6.2 & Table-4(Phosphorus content (IS 17264)) |
- |
0 |
|
- |
6.2 & Table-4(Ultraviolet resistance (IS 13162 Part-2)) |
- |
0 |
|
- |
6.2 & Table-4(Colour strength with reference to standard yarn (IS 17264)) |
- |
0 |
|
- |
6.4 & Table-5(Colour Fastness Rating to light (IS/ISO 105-B01)) |
- |
0 |
|
- |
6.4 & Table-5(Colour Fastness Rating to Rubbing (IS/ISO 105-X12)) |
- |
0 |
|
- |
8(Marking (IS 17264)) |
- |
0 |
|
- |
6.6 & Table-6(Free and releasable formaldehyde (IS 14563 Part-1 & 2)) |
- |
0 |
|
- |
6.6 & Table-6(Mercury (IS 15651)) |
- |
0 |
|
- |
6.6 & Table-6(Chromium III (IS 15651)) |
- |
0 |
|
- |
6.6 & Table-6(Chromium VI (IS 15651)) |
- |
0 |
|
- |
6.6 & Table-6(Lead (IS 15651)) |
- |
0 |
|
- |
6.6 & Table-6(Cadmium (IS 15651)) |
- |
0 |
|
- |
6.6 & Table-6(Copper (IS 15651)) |
- |
0 |
|
- |
6.6 & Table-6(Antimony (IS 15651)) |
- |
0 |
|
- |
6.6 & Table-6(Pentachlorophenol (IS 15651)) |
- |
0 |
|
- |
6.6 & Table-6(Pesticides (sum parameter) (IS 15651)) |
- |
0 |
|
- |
6.6 & Table-6(Banned pesticides (IS 15651)) |
- |
0 |
|
- |
6.6 & Table-6(Banned azo colourants (arylamines) (IS 15570)) |
- |
0 |
|
- |
5.2(Identification and Description, Annex J of IS 16481 & IS 667) |
- |
0 |
|
- |
6.4- Table -5, Sl no. 2 (a)(Rubbing, Dry IS/ISO 105-X12) |
- |
0 |
|
- |
6.4- Table -5, Sl no. 2 (b)(Rubbing, Wet IS/ISO 105-X13) |
- |
0 |
|
- |
6.5(Commercial mass) |
- |
0 |
|
- |
6.2 Table 4(Finish Oil Pickup) |
- |
0 |
|
- |
6.2 Table 4(Phosporus content) |
- |
0 |
|
- |
6.2 Table 4(Colour strength with reference to std yarn %) |
- |
0 |
|
- |
6.4 Table 5(Colour Fastness to Rubbing) |
- |
0 |
|
- |
6.1 Table 3(Linear Density, Denier (dtex)) |
- |
0 |
|
- |
6.1 Table 3(Tenacity,gpd (cN/dtex)) |
- |
0 |
|
- |
6.1 Table 3(Elongation %) |
- |
0 |
|
- |
6.1 Table 3(Hot Air Shrinkage %) |
- |
0 |
|
- |
6.2 & Table-4(Colour difference with reference to standard yarn, measured as ΔE (IS 17264)) |
- |
0 |
|
- |
|
Complete
|
|
26 Aug, 2024 |
- |