BIS - LIMS (Laboratory Information Management System)

ALPHA TEST HOUSE PRIVATE LIMITED

198-199, M.I.E, PHASE-I, BAHADURGARH, HARYANA-124507, Bahadurgarh, Jhajjar, Haryana, 124507

9711227171 info@alphatesthouse.com

Scope List

Reset

209 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

181

IS 11657 (1986)

Specification for phosphorus oxychloride, technical

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(Description )	-	1000	10% Discount for BIS
2.2, Table 1 and A-2 of IS 11657(Boiling Range ( 95 percent distillation by volume ))	-	2000	10% Discount for BIS
2.2, Table 1 and A-3 of IS 11657(Relative density at 27°C)	-	2000	10% Discount for BIS
2.2, Table 1 and A-4 of IS 11657(Assay ( as POCl3 ))	-	2000	10% Discount for BIS
2.1(Description )	-	0	-
2.2, Table 1 and A-2 of IS 11657(Boiling Range ( 95 percent distillation by volume ))	-	0	-
2.2, Table 1 and A-3 of IS 11657(Relative density at 27°C)	-	0	-
2.2, Table 1 and A-4 of IS 11657(Assay ( as POCl3 ))	-	0	-

Complete

26 Aug, 2024

-
Included w.e.f. 16-03-2022.

182

IS 3205 (1984)

Specification for precipitated barium carbonate, technical (First Revision)

7500 View breakup
Rs.7500/- (10% Discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Description)	-	500	10% Discount for BIS
3.2, Table 1 and Appendix A-2 of IS 3205(Barium (as Ba ) - for All Grades)	-	500	10% Discount for BIS
3.2, Table 1 and Appendix A-3 of IS 3205(Carbonate ( as CO3) - for All Grades)	-	500	10% Discount for BIS
3.2, Table 1 and Appendix A-4 of IS 3205(Moisture - For Grade 1 )	-	500	10% Discount for BIS
3.2, Table 1 and Appendix A-5 of IS 3205(Matter insolubile in hydrochloric acid - For Grade 1)	-	500	10% Discount for BIS
3.2, Table 1 and Appendix A-6 of IS 3205(Free Alkali - For Grade 2)	-	500	10% Discount for BIS
3.2, Table 1 and Appendix A-7 of IS 3205(Water Soluble Sulphide ( as BaS ) -For Grade 1)	-	500	-
3.2, Table 1 and Appendix A-8 of IS 3205(Total Sulphur ( as SO4 ) - For Grade 1)	-	500	-
3.2, Table 1 and Appendix A-9 of IS 3205(Alkali and other metasulphates ( as BaSO4 ) - For Grade 1 )	-	500	-
3.2, Table 1 and Appendix A-10 of IS 3205(Sodium Oxides ( as NaO2 ) - For Grade 1)	-	500	-
3.2, Table 1 and Appendix A-11 of IS 3205(Iron ( as Fe2O3) - For Grade 1)	-	250	-
3.2, Table 1 and Appendix A-12 of IS 3205(Tap Density - For Grade 1)	-	250	-
3.2, Table 1 and Appendix A-13 of IS 3205(Residue retained on 63 micron IS sieve - For Grade 1)	-	250	-
3.2, Table 1 and Appendix A-14 of IS 3205(Reaction efficiency ( after 45 minutes ) - For Grade 2)	-	250	-
3.1(Description)	-	0	-
3.2, Table 1 and Appendix A-2 of IS 3205(Barium (as Ba ) - for All Grades)	-	0	-
3.2, Table 1 and Appendix A-3 of IS 3205(Carbonate ( as CO3) - for All Grades)	-	0	-
3.2, Table 1 and Appendix A-4 of IS 3205(Moisture - For Grade 1 )	-	0	-
3.2, Table 1 and Appendix A-5 of IS 3205(Matter insolubile in hydrochloric acid - For Grade 1)	-	0	-
3.2, Table 1 and Appendix A-6 of IS 3205(Free Alkali - For Grade 2)	-	0	-
3.2, Table 1 and Appendix A-7 of IS 3205(Water Soluble Sulphide ( as BaS ) -For Grade 1)	-	0	-
3.2, Table 1 and Appendix A-8 of IS 3205(Total Sulphur ( as SO4 ) - For Grade 1)	-	0	-
3.2, Table 1 and Appendix A-9 of IS 3205(Alkali and other metasulphates ( as BaSO4 ) - For Grade 1 )	-	0	-
3.2, Table 1 and Appendix A-10 of IS 3205(Sodium Oxides ( as NaO2 ) - For Grade 1)	-	0	-
3.2, Table 1 and Appendix A-11 of IS 3205(Iron ( as Fe2O3) - For Grade 1)	-	0	-
3.2, Table 1 and Appendix A-12 of IS 3205(Tap Density - For Grade 1)	-	0	-
3.2, Table 1 and Appendix A-13 of IS 3205(Residue retained on 63 micron IS sieve - For Grade 1)	-	0	-
3.2, Table 1 and Appendix A-14 of IS 3205(Reaction efficiency ( after 45 minutes ) - For Grade 2)	-	0	-

Complete

26 Aug, 2024

-
Included w.e.f. 16-03-2022.

183

IS 336 (1973)

Specification for ether

9000 View breakup
Rs.9000/- (10% Discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl no .3.1(Description)	-	500	10% Discount for BIS
Cl no .3.2(Odour and Taste )	-	500	10% Discount for BIS
Cl no .3.4(Solubility )	-	500	10% Discount for BIS
Cl no .3.5 [ Table 1, Sl no.(i) ] Appendix A 2(Relative density at 20 °C Solvent Grade )	-	500	10% Discount for BIS
Cl no .3.5 [ Table 1, Sl no.(ii) ] Appendix A 3(Peroxides )	-	500	10% Discount for BIS
Cl no .3.5 [ Table 1, Sl no.(iii) ] Appendix A 4(Distillation Range Solvent Grade )	-	1000	10% Discount for BIS
Cl no .3.5 [ Table 1, Sl no.(v) ] Appendix A 6(Methyl alcohol )	-	1000	10% Discount for BIS
Cl no .3.5 [ Table 1, Sl no.(vi) ] Appendix A 7(Aldehydes and acetone )	-	1000	10% Discount for BIS
Cl no .3.5 [ Table 1, Sl no.(vii) ] Appendix A 8(Sulphurous acids and other free acids )	-	1000	10% Discount for BIS
Cl no .3.1(Description)	-	0	-
Cl no .3.2(Odour and Taste )	-	0	-
Cl no .3.4(Solubility )	-	0	-
Cl no .3.5 [ Table 1, Sl no.(i) ] Appendix A 2(Relative density at 20 °C Solvent Grade )	-	0	-
Cl no .3.5 [ Table 1, Sl no.(ii) ] Appendix A 3(Peroxides )	-	0	-
Cl no .3.5 [ Table 1, Sl no.(iii) ] Appendix A 4(Distillation Range Solvent Grade )	-	0	-
Cl no .3.5 [ Table 1, Sl no.(v) ] Appendix A 6(Methyl alcohol )	-	0	-
Cl no .3.5 [ Table 1, Sl no.(vi) ] Appendix A 7(Aldehydes and acetone )	-	0	-
Cl no .3.5 [ Table 1, Sl no.(vii) ] Appendix A 8(Sulphurous acids and other free acids )	-	0	-

Complete

26 Aug, 2024

-
Included w.e.f. 16-03-2022.

184

IS 297 (2001)

Sodium sulphide, technical - Specification (Second Revision)

8700 View breakup
Rs.8500/- (10% Discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2 (i)(Total Sulphide ( as Na2S))	-	700	10% Discount for BIS
3.2 (ii)(Hydrosulphide (as NaHS))	-	1200	10% Discount for BIS
3.2 (iii)(Excess Alkali (as Na2CO3))	-	1200	10% Discount for BIS
3.2 (vi)(Compounds ( as Na2S2O3))	-	1200	10% Discount for BIS
3.2 (v)(Iron and aluminum compound (Fe2O3))	-	1200	10% Discount for BIS
3.2 (vi)(Sodium Sulphate (Na2SO4))	-	1200	10% Discount for BIS
3.2 (vii)(Sodium Chloride ( as NaCI))	-	1000	10% Discount for BIS
3.2 (viii)(Water insoluble)	-	1000	10% Discount for BIS
3.2 (i)(Total Sulphide ( as Na2S))	-	0	-
3.2 (ii)(Hydrosulphide (as NaHS))	-	0	-
3.2 (iii)(Excess Alkali (as Na2CO3))	-	0	-
3.2 (vi)(Compounds ( as Na2S2O3))	-	0	-
3.2 (v)(Iron and aluminum compound (Fe2O3))	-	0	-
3.2 (vi)(Sodium Sulphate (Na2SO4))	-	0	-
3.2 (vii)(Sodium Chloride ( as NaCI))	-	0	-
3.2 (viii)(Water insoluble)	-	0	-

Complete

26 Aug, 2024

-
Included w.e.f. 16-03-2022.

185

IS 14709 (1999)

N - Butyl acrylate - Specification

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl No. 3 C-5 and D-5 [ Table 1, Sl no.(i) ] Annex A(Assay)	-	1000	10% Discount for BIS
Cl No. 3 C-5 and D-5 [ Table 1, Sl no.(ii)] Annex B(Acidity (as acrylic acid))	-	1500	10% Discount for BIS
Cl No. 3 C-5 and D-5 [ Table 1, Sl no.(iii)] Ref to IS 8768(Colour)	-	1500	10% Discount for BIS
Cl No. 3 C-5 and D-5 [ Table 1, Sl no.(iv)] Ref to IS 2362(Water)	-	1500	10% Discount for BIS
Cl No. 3 C-5 and D-5 [ Table 1, Sl no.(v)] Annex C(Inhibitors (as Butyl Etherhydroquinone))	-	1500	10% Discount for BIS

Complete

26 Aug, 2024

-
Included w.e.f. 16-03-2022.

186

IS 4985 (2021)

UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision

27500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1(Colour)	-	500	10% discount for BIS
10.1(Surface Finish)	-	500	10% discount for BIS
7.2.1.1 Table3(Angle of taper (Note-1))	-	500	10% discount for BIS
10.7(Sulphated Ash Content)	-	500	10% discount for BIS
5(CLASSIFICATION OF PIPES)	-	500	10% discount for BIS
7(DIMENSIONS-PIPE-Nominal Diameter)	-	500	10% discount for BIS
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	500	10% discount for BIS
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	500	10% discount for BIS
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation)	-	500	10% discount for BIS
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	500	10% discount for BIS
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	500	10% discount for BIS
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	500	10% discount for BIS
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	500	10% discount for BIS
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	500	10% discount for BIS
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	500	10% discount for BIS
7.2.1(DIMENSIONS-Socket)	-	500	10% discount for BIS
7.2.1(DIMENSIONS-Socket)	-	500	10% discount for BIS
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	500	10% discount for BIS
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	500	10% discount for BIS
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-	500	10% discount for BIS
7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-	500	10% discount for BIS
7.2.1.2-Table 4(DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter)	-	500	10% discount for BIS
8(SEALING RINGS)	-	500	10% discount for BIS
9.1(PIPE ENDS)	-	500	10% discount for BIS
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	500	10% discount for BIS
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	500	10% discount for BIS
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	500	10% discount for BIS
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	500	10% discount for BIS
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	500	10% discount for BIS
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	500	10% discount for BIS
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	500	10% discount for BIS
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	500	10% discount for BIS
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	500	10% discount for BIS
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	500	10% discount for BIS
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	500	10% discount for BIS
11.2(Resistance to External Blows at 0°C)	-	500	10% discount for BIS
7.1.3(mean outside diameter, outside diameter at any point, and wall thickness of plumbing pipes)	-	500	10% discount for BIS
7.1.4(Length)	-	500	10% discount for BIS
10.3(Effect on Water Test)	-	500	10% discount for BIS
10.1(Colour)	-	500	10% discount for BIS
10.1(Surface Finish)	-	500	10% discount for BIS
7.2.1.1 Table3(Angle of taper (Note-1))	-	500	10% discount for BIS
10.7(Sulphated Ash Content)	-	500	10% discount for BIS
5(CLASSIFICATION OF PIPES)	-	500	10% discount for BIS
7(DIMENSIONS-PIPE-Nominal Diameter)	-	500	10% discount for BIS
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	500	10% discount for BIS
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	500	10% discount for BIS
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation)	-	500	10% discount for BIS
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	500	10% discount for BIS
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	500	10% discount for BIS
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	500	10% discount for BIS
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	500	10% discount for BIS
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	500	10% discount for BIS
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	500	10% discount for BIS
7.2.1(DIMENSIONS-Socket)	-	500	10% discount for BIS
7.2.1(DIMENSIONS-Socket)	-	500	10% discount for BIS
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	500	10% discount for BIS
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	500	10% discount for BIS
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-	500	10% discount for BIS
7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-	500	10% discount for BIS
7.2.1.2-Table 4(DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter)	-	500	10% discount for BIS
8(SEALING RINGS)	-	500	10% discount for BIS
9.1(PIPE ENDS)	-	500	10% discount for BIS
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	500	10% discount for BIS
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	500	10% discount for BIS
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	500	10% discount for BIS
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	500	10% discount for BIS
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1000	10% discount for BIS
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	1000	10% discount for BIS
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	1000	10% discount for BIS
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	1000	10% discount for BIS
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	1000	10% discount for BIS
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	1000	10% discount for BIS
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	1000	10% discount for BIS
11.2(Resistance to External Blows at 0°C)	-	1000	10% discount for BIS
7.1.3(mean outside diameter, outside diameter at any point, and wall thickness of plumbing pipes)	-	500	10% discount for BIS
7.1.4(Length)	-	500	10% discount for BIS
10.3(Effect on Water Test)	-	1000	10% discount for BIS

Complete

26 Aug, 2024

-
-

187

IS 10702 (1992)

Rubber hawal chappal - Specification (Second Revision)

18500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Shape & Design)	-	500	10% Discount for BIS
5.3(Thickness )	-	500	10% Discount for BIS
5.4(Stud bolt)	-	500	10% Discount for BIS
5.4(Stud diameter)	-	500	10% Discount for BIS
5.4(Tear strength )	-	1000	10% Discount for BIS
5.4(Hardness (shore A)- after ageing)	-	1000	10% Discount for BIS
5.4(Hardness (Shore A))	-	1000	10% Discount for BIS
5.4(Breaking strength )	-	1000	10% Discount for BIS
5.4(Elongation at break )	-	1000	10% Discount for BIS
5.4(Tensile Strength )	-	1000	10% Discount for BIS
5.4(Relative density )	-	1000	10% Discount for BIS
5.4(Shrinkage test (at 100 C temp))	-	2000	10% Discount for BIS
5.4(Shrinkage test (at room temp))	-	1000	10% Discount for BIS
5.4(Split tear strength )	-	2000	10% Discount for BIS
5.4(Compression set)	-	2000	10% Discount for BIS
5.4(Hardness (Shore A))	-	1000	10% Discount for BIS
5.4(Relative density)	-	1000	10% Discount for BIS
6, 6.1, 6.2(Marking and packing)	-	500	10% Discount for BIS

Complete

26 Aug, 2024

-
Included w.e.f. 25-2-2022.

188

IS 17043 (2018)

Derby shoes - Specification

24000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.15.2(Breaking load & tag retention)	-	352	10% Discount for BIS
4.15.1(Length of laces )	-	352	10% Discount for BIS
4.14(Eyelet pull out test)	-	352	10% Discount for BIS
4.13.8(Flex resistance )	-	352	10% Discount for BIS
4.13.7(Abrasion resistance )	-	352	10% Discount for BIS
4.13.6(Tear Strength)	-	352	10% Discount for BIS
4.13.5(Ageing test)	-	352	10% Discount for BIS
4.13.4(Hardness (IRHD))	-	352	10% Discount for BIS
4.13.3(Density )	-	352	10% Discount for BIS
4.13.2(Thickness )	-	352	10% Discount for BIS
4.13.1(Meterial)	-	352	10% Discount for BIS
4.12(Breaking Strength of thread)	-	352	10% Discount for BIS
4.11.2(Tear Strength)	-	355	10% Discount for BIS
4.11.1(Thickness )	-	355	10% Discount for BIS
4.10(Toe Puff & counter stiffener thickness )	-	355	10% Discount for BIS
4.9.3(Abrasion resistance )	-	352	10% Discount for BIS
4.9.2(Water absorption & desorption )	-	352	10% Discount for BIS
4.9.1(Thickness )	-	352	10% Discount for BIS
4.8.3(Water absorption & desorption )	-	352	10% Discount for BIS
4.8.2(Abrasion )	-	355	10% Discount for BIS
4.8.1(Thickness )	-	352	10% Discount for BIS
4.7.4(Water vapour permeability & coefficent )	-	352	10% Discount for BIS
4.7.3(Abrasion resistance )	-	352	10% Discount for BIS
4.7.2(Tear Strength)	-	355	10% Discount for BIS
4.7.1(Thickness )	-	352	10% Discount for BIS
4.6.4(Water penetration and water absorption)	-	352	10% Discount for BIS
4.6.3(Water vapour permeability & coefficent )	-	352	10% Discount for BIS
4.6.2(Tear Strength)	-	352	10% Discount for BIS
4.6.1(Thickness )	-	352	10% Discount for BIS
4.5.8(Energy absorption of seat region )	-	352	10% Discount for BIS
4.5.7(Cold insulation tester )	-	355	10% Discount for BIS
4.5.6(Heat insulation of sole complex)	-	352	10% Discount for BIS
4.5.5.1(Electrical Properties Antistatic )	-	352	10% Discount for BIS
4.5.4(Slip Resitance)	-	352	10% Discount for BIS
4.5.3.2(Interayer bond strength)	-	352	10% Discount for BIS
4.5.3.1(Upper/outsole bond strength)	-	352	10% Discount for BIS
4.5.2(Ergonomic Feature)	-	352	10% Discount for BIS
4.5.1(Contruction)	-	352	10% Discount for BIS
4.4(Height of upper )	-	352	10% Discount for BIS
4.3.2(Weight)	-	352	10% Discount for BIS
4.3.1(Size)	-	352	10% Discount for BIS
4.2(Design )	-	355	10% Discount for BIS
4.1(General)	-	352	10% Discount for BIS
4.1, Table 1(Physical Requirements for Derby Shoes)	-	352	10% Discount for BIS
4.3.2., Table 2(Maximum Weight of Derby Shoe Pair)	-	352	10% Discount for BIS
4.4, Table 3(Height of the Upper)	-	352	10% Discount for BIS
4.5.3(Bond Strength)	-	352	10% Discount for BIS
4.9(Insocks)	-	352	10% Discount for BIS
6.1(Scale of Sampling)	-	352	10% Discount for BIS
6.2(Methods of Selecting Footwear)	-	352	10% Discount for BIS
6.3.1(Visual and Tactile Examination)	-	352	10% Discount for BIS
6.3.2(Dimensional Characteristics)	-	352	10% Discount for BIS
6.3.3.2(Tests for chemical requirements)	-	352	10% Discount for BIS
6.3.3.1(Tests for physical requirements)	-	355	10% Discount for BIS
7(Marking)	-	352	10% Discount for BIS

Complete

26 Aug, 2024

-
-

189

IS 15298 : part 4 (2017)

Personal protective equipment: Part 4 occupational footwear (Second Revision)

21000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 1(CLASS I)	-	270	10% Discount for BIS
Table 1(CLASS II)	-	270	10% Discount for BIS
5.2.2.1(General)	-	270	10% Discount for BIS
5.2.2.2(Height of upper)	-	270	10% Discount for BIS
5.2.2.3(Seat region)	-	270	10% Discount for BIS
5.3.2.1(Construction)	-	322	10% Discount for BIS
5.3.1.2(Upper/outsole bond strength)	-	322	10% Discount for BIS
5.3.2.2(Leakproofness)	-	322	10% Discount for BIS
5.3.2.3(Specific ergonomic features )	-	322	10% Discount for BIS
5.3.4.1(Slip resistance)	-	322	10% Discount for BIS
5.3.4.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (SLS) solution)	-	322	10% Discount for BIS
5.3.4.3(Slip resistance on steel floor with glycerine )	-	322	10% Discount for BIS
5.3.4.4(Slip resistance on ceramic tile floor with SLS and on steel floor with glycerine )	-	322	10% Discount for BIS
5.4.2.1(Upper)	-	322	10% Discount for BIS
5.4.2.2(Thickness )	-	322	10% Discount for BIS
5.4.2.3(Tear strenth)	-	270	10% Discount for BIS
5.4.2.4(Tensile properties)	-	270	10% Discount for BIS
5.4.2.5(Flexing resistance )	-	270	10% Discount for BIS
5.4.2.6(Water vapour permeability and coefficient )	-	270	10% Discount for BIS
5.4.2.8(Hydrolysis)	-	270	10% Discount for BIS
5.5.2.1(Tear strength )	-	270	10% Discount for BIS
5.5.2.2(Abrasion resistance )	-	270	10% Discount for BIS
5.5.2.3(Water vapour permeability and coefficient )	-	270	10% Discount for BIS
5.6(Tongue )	-	270	10% Discount for BIS
5.6.2.1(Tear strength )	-	270	10% Discount for BIS
5.7.2.1(Insole and insock )	-	270	10% Discount for BIS
5.7.2.3(Water absorption and desorption )	-	270	10% Discount for BIS
5.7.4.1(Abrasion resistance )	-	270	10% Discount for BIS
5.7.4.2(Abrasion resistance )	-	270	10% Discount for BIS
5.8.2.1(Outsole)	-	270	10% Discount for BIS
5.8.1.1(Thickness )	-	290	10% Discount for BIS
5.8.1.2(Cleated area )	-	270	10% Discount for BIS
5.8.1.3(Cleat height)	-	270	10% Discount for BIS
5.8.2.2(Tear strength )	-	270	10% Discount for BIS
5.8.2.4(Flexing resistance )	-	270	10% Discount for BIS
5.8.2.5(Hydrolysis )	-	270	10% Discount for BIS
5.8.2.6(Interlayer bond strength )	-	270	10% Discount for BIS
6.2.1.4(Flex resistance of penetration-resistant inserts )	-	270	10% Discount for BIS
6.2.1.5.1(Corrosion resistance of penetration-resistant metallic inserts)	-	270	10% Discount for BIS
6.2.2.1(Conductive footwear)	-	270	10% Discount for BIS
6.2.2.2(Antistatic footwear)	-	270	10% Discount for BIS
6.2.3.1(Heat insulation of sole complex )	-	270	10% Discount for BIS
6.2.3.2(Cold insulation of sole complex)	-	270	10% Discount for BIS
6.2.2.4(Energy absorption of seat region )	-	270	10% Discount for BIS
6.3.2.2(Upper- water penetration)	-	270	10% Discount for BIS
7(a)(Marking)	-	270	10% Discount for BIS
7(b)(Marking)	-	270	10% Discount for BIS
7(c)(Marking)	-	270	10% Discount for BIS
7(d)(Marking)	-	270	10% Discount for BIS
7(e)(Marking)	-	270	10% Discount for BIS
5.4.2.7(pH value )	-	270	10% Discount for BIS
5.4.2.9(Chromium VI content )	-	270	10% Discount for BIS
5.5.2.4(pH value )	-	270	10% Discount for BIS
5.5.2.5(Chromium VI content )	-	270	10% Discount for BIS
5.6.2.2(pH value )	-	270	10% Discount for BIS
5.6.2.3(Chromium VI content )	-	270	10% Discount for BIS
5.7.2.2(Insole and insock )	-	270	10% Discount for BIS
5.7.2.5(Chromium VI content )	-	270	10% Discount for BIS
5.8.2.3(Abrasion resistance )	-	270	10% Discount for BIS
Table 1(CLASS I)	-	270	10% Discount for BIS
Table 1(CLASS II)	-	270	10% Discount for BIS
5.2.2.1(General)	-	270	10% Discount for BIS
5.2.2.2(Height of upper)	-	270	10% Discount for BIS
5.2.2.3(Seat region)	-	270	10% Discount for BIS
5.3.2.1(Construction)	-	270	10% Discount for BIS
5.3.1.2(Upper/outsole bond strength)	-	270	10% Discount for BIS
5.3.2.2(Leakproofness)	-	270	10% Discount for BIS
5.3.2.3(Specific ergonomic features )	-	270	10% Discount for BIS
5.3.4.1(Slip resistance)	-	270	10% Discount for BIS
5.3.4.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (SLS) solution)	-	270	10% Discount for BIS
5.3.4.3(Slip resistance on steel floor with glycerine )	-	270	10% Discount for BIS
5.3.4.4(Slip resistance on ceramic tile floor with SLS and on steel floor with glycerine )	-	270	10% Discount for BIS
5.4.2.1(Upper)	-	270	10% Discount for BIS
5.4.2.2(Thickness )	-	270	10% Discount for BIS
5.4.2.3(Tear strenth)	-	270	10% Discount for BIS
5.4.2.4(Tensile properties)	-	270	10% Discount for BIS
5.4.2.5(Flexing resistance )	-	270	10% Discount for BIS
5.4.2.6(Water vapour permeability and coefficient )	-	270	10% Discount for BIS
5.4.2.8(Hydrolysis)	-	270	10% Discount for BIS
5.5.2.1(Tear strength )	-	270	10% Discount for BIS
5.5.2.2(Abrasion resistance )	-	270	10% Discount for BIS
5.5.2.3(Water vapour permeability and coefficient )	-	270	10% Discount for BIS
5.6(Tongue )	-	270	10% Discount for BIS
5.6.2.1(Tear strength )	-	270	10% Discount for BIS
5.7.2.1(Insole and insock )	-	270	10% Discount for BIS
5.7.2.3(Water absorption and desorption )	-	270	10% Discount for BIS
5.7.4.1(Abrasion resistance )	-	270	10% Discount for BIS
5.7.4.2(Abrasion resistance )	-	270	10% Discount for BIS
5.8.2.1(Outsole)	-	270	10% Discount for BIS
5.8.1.1(Thickness )	-	270	10% Discount for BIS
5.8.1.2(Cleated area )	-	270	10% Discount for BIS
5.8.1.3(Cleat height)	-	270	10% Discount for BIS
5.8.2.2(Tear strength )	-	270	10% Discount for BIS
5.8.2.4(Flexing resistance )	-	270	10% Discount for BIS
5.8.2.5(Hydrolysis )	-	270	10% Discount for BIS
5.8.2.6(Interlayer bond strength )	-	270	10% Discount for BIS
6.2.1.4(Flex resistance of penetration-resistant inserts )	-	270	10% Discount for BIS
6.2.1.5.1(Corrosion resistance of penetration-resistant metallic inserts)	-	270	10% Discount for BIS
6.2.2.1(Conductive footwear)	-	270	10% Discount for BIS
6.2.2.2(Antistatic footwear)	-	270	10% Discount for BIS
6.2.3.1(Heat insulation of sole complex )	-	270	10% Discount for BIS
6.2.3.2(Cold insulation of sole complex)	-	270	10% Discount for BIS
6.2.2.4(Energy absorption of seat region )	-	270	10% Discount for BIS
6.3.2.2(Upper- water penetration)	-	270	10% Discount for BIS
7(a)(Marking)	-	270	10% Discount for BIS
7(b)(Marking)	-	270	10% Discount for BIS
7(c)(Marking)	-	270	10% Discount for BIS
7(d)(Marking)	-	270	10% Discount for BIS
7(e)(Marking)	-	270	10% Discount for BIS
5.4.2.7(pH value )	-	270	10% Discount for BIS
5.4.2.9(Chromium VI content )	-	270	10% Discount for BIS
5.5.2.4(pH value )	-	270	10% Discount for BIS
5.5.2.5(Chromium VI content )	-	270	10% Discount for BIS
5.6.2.2(pH value )	-	270	10% Discount for BIS
5.6.2.3(Chromium VI content )	-	270	10% Discount for BIS
5.7.2.2(Insole and insock )	-	270	10% Discount for BIS
5.7.2.5(Chromium VI content )	-	270	10% Discount for BIS
5.8.2.3(Abrasion resistance )	-	270	10% Discount for BIS

Complete

26 Aug, 2024

-
-

190

IS 15298 : Part 3 (2019)

Personal protective equipment: Part 3 protective footwear (Second Revision)

21000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.2 Table-2(Height of upper)	-	362	10% Discount for BIS
5.2.3 Table-2(Seat Region)	-	362	10% Discount for BIS
5.3.1.1 Table-2(Construction)	-	362	10% Discount for BIS
5.3.1.2 Table-2(Upper/Outsole Bond)	-	362	10% Discount for BIS
5.3.2.1 Table-2(General)	-	362	10% Discount for BIS
5.3.2.2 Table-2(Internal Length of toe cap)	-	362	10% Discount for BIS
5.3.2.3 Table-2(Impact Resistance -T- )	-	362	10% Discount for BIS
5.3.2.4 Table-2(Compression)	-	362	10% Discount for BIS
5.3.2.5 Table-2(Behaviour of toe cap)	-	362	10% Discount for BIS
5.3.3 Table-2(Leak Proofness)	-	362	10% Discount for BIS
5.3.4 Table-2(Specific Ergonomic)	-	362	10% Discount for BIS
5.3.5.2 Table-2(Slip Resistance SRA)	-	362	10% Discount for BIS
5.3.5.3 Table-2(Slip Resistance SRB)	-	362	10% Discount for BIS
5.3.5.4 Table-2(Slip Resistance SRC)	-	362	10% Discount for BIS
5.4.1 Table-2(General)	-	362	10% Discount for BIS
5.4.2 Table-2(Thickness)	-	362	10% Discount for BIS
5 4 3 Table-2(Tear Strength)	-	362	10% Discount for BIS
5.4.4 Table-2(Tensile Properties)	-	362	10% Discount for BIS
5.4.5 Table-2(Flexing Resistance)	-	362	10% Discount for BIS
5.4.6 Table-2(Water Vapour Permeability & Coefficient)	-	362	10% Discount for BIS
5 4.8 Table-2(Hydrolysis)	-	362	10% Discount for BIS
5.5.1 Table-2(Tear Strength)	-	362	10% Discount for BIS
5.5.2 Table-2(Abrasion Resistance)	-	362	10% Discount for BIS
5.5.3 Table-2(Water Vapour Permeability & Coefficient)	-	362	10% Discount for BIS
5.6.1 Table-2(Tear Strength)	-	362	10% Discount for BIS
5.7.1 Table-3(Thickness)	-	362	10% Discount for BIS
5.7.3 Table-3(Water Absorption &)	-	362	10% Discount for BIS
5.7.4.1 Table-3(Insole Abrasion)	-	362	10% Discount for BIS
5.7.4.2 Table-3(Abrasion)	-	362	10% Discount for BIS
5.8.1 Table-2(Design)	-	362	10% Discount for BIS
5.8.2 Table-2(Tear Strength)	-	362	10% Discount for BIS
5.8.3 Table-3(Abrasion Resistance)	-	362	10% Discount for BIS
5.8.4 Table-3(Flexing Resistance)	-	362	10% Discount for BIS
5.8.5 Table-3(Hydrolysis)	-	362	10% Discount for BIS
5.8.6 Table-2(Interlayer BondStrength)	-	362	10% Discount for BIS
6.2.2.1 Table-18(Electrical Properties)	-	362	10% Discount for BIS
6.2.2.2 Table-18(Antistatic Footwear)	-	362	10% Discount for BIS
6.2.3.1 Table-18(Heat Insulated Comp)	-	362	10% Discount for BIS
6.2.3.2 Table-18(Cold Insulated)	-	362	10% Discount for BIS
6.2.4 Table-18(Energy Absorption of seat region)	-	362	10% Discount for BIS
6.3 Table-18(Water Penetration & Absorption)	-	362	10% Discount for BIS
Cl.4, Table1, Annex A ISO 20344 :2011(Classification and designs)	-	362	10% Discount for BIS
Cl. 5,Cl.5.1Table 2, Table 3(General)	-	362	10% Discount for BIS
Cl. 5.2, Cl.5.2.1, Figure 3,(General)	-	362	10% Discount for BIS
Cl.5.3.5.1, Cl.5.3.5.2,Cl.5.3.5.3 or 5.3.5.4 IS 15298 (Part1):2015,ISO 20344:2011,5.11(General)	-	362	10% Discount for BIS
8(Information to be supplied)	-	362	10% Discount for BIS
Cl.8.1 IS 15298 Part 3:2018, ISO 20346 :2014(General)	-	362	10% Discount for BIS
8.2(Electrical properties)	-	362	10% Discount for BIS
8.2.2(Antistatic footwear)	-	362	10% Discount for BIS
8.3(Insocks)	-	362	10% Discount for BIS
5.4 9 Table-2(Chrome VI)	-	362	10% Discount for BIS
5 4.7 Table-2( )	-	362	10% Discount for BIS
5.5.4 Table-2(pH Value)	-	362	10% Discount for BIS
5.5.5 Table-2(Chrome VI)	-	362	10% Discount for BIS
5.6.2 Table-2(pH Value)	-	362	10% Discount for BIS
5.6.3 Table-2(Chromium VI)	-	362	10% Discount for BIS
5.7.2 Table-3(pH Value)	-	362	10% Discount for BIS
5.7.5 Table-3(Chromium VI)	-	362	10% Discount for BIS

Complete

26 Aug, 2024

-
-

191

IS 13334 : Part 2 (2014)

Skimmed milk powder - Specification: Part 2 extra grade (First Revision)

5500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 1 (ix)(Bacterial count (IS 5402))	-	400	10% Discount for BIS
Table 1 (x)(Coliform count (IS 5401 - Part 1))	-	300	10% Discount for BIS
Table 1 (xi)(Escherichia coli (IS 5887 - Part 1))	-	300	10% Discount for BIS
Table 1 (xii)(Coagulase positive Staphylococcus aureus (IS 5887 - Part 2))	-	200	10% Discount for BIS
Table 1 (xiii)(Salmonella (IS 5887 - Part 3))	-	200	10% Discount for BIS
Table 1 (xiv)(a)(Spore Count: a)Aerobic (Bacillus cereus) Type m (IS 5887 - Part 6))	-	200	10% Discount for BIS
Table 1 (xiv)(b)(Spore Count: b) Anaerobic (Sulfite reducing Clostridia) Type m (ISO 15213 : 2003))	-	200	-
Table 1 (xv)(Listeria monocytogenes (IS 14988 - Part 2 : 2001))	-	200	-
Table 1 (xiv)(a)(Spore Count: a) Aerobic (Bacillus cereus) Type M (IS 5887 - Part 6))	-	200	-
Table 1 (xiv)(b)(Spore Count: b) Anaerobic (Sulfite reducing Clostridia) Type M (ISO 15213 : 2003))	-	200	-
Table 1 (ix)(Bacterial count (IS 5402))	-	200	-
Table 1 (x)(Coliform count (IS 5401 - Part 1))	-	200	-
Table 1 (xi)(Escherichia coli (IS 5887 - Part 1))	-	200	-
Table 1 (xii)(Coagulase positive Staphylococcus aureus (IS 5887 - Part 2))	-	200	-
Table 1 (xiii)(Salmonella (IS 5887 - Part 3))	-	200	-
Table 1 (xiv)(a)(Spore Count: a)Aerobic (Bacillus cereus) Type m (IS 5887 - Part 6))	-	200	-
Table 1 (xiv)(b)(Spore Count: b) Anaerobic (Sulfite reducing Clostridia) Type m (ISO 15213 : 2003))	-	200	-
Table 1 (xv)(Listeria monocytogenes (IS 14988 - Part 2 : 2001))	-	200	-
Table 1 (xiv)(a)(Spore Count: a) Aerobic (Bacillus cereus) Type M (IS 5887 - Part 6))	-	200	-
Table 1 (xiv)(b)(Spore Count: b) Anaerobic (Sulfite reducing Clostridia) Type M (ISO 15213 : 2003))	-	200	-
Clause no 4(Description)	-	100	-
Clause no 5.2(freedom from extraneous matter)	-	100	-
Clause no 5.4(Flavour)	-	100	-
Table 1 (i)(Moisture (IS 116231or 16072))	-	100	-
Table 1 (ii)(Milk protein in milk solids not fat (IS 72192))	-	100	-
Table 1 (iii)(Milk fat (IS 117213) or Annex B)	-	100	-
Table 1 (iv)(Insolubility index (IS 12759))	-	100	-
Table 1 (v)(Total ash (on dry basis), Annex B of IS 14433)	-	100	-
Table 1 (vi)(Titratable acidity (IS 11766))	-	100	-
Table 1 (vii)(Lactate content (IS 11202))	-	100	-
Table 1 (viii)(Scorched particles (equivalent to Disc B) (IS 13500))	-	100	-

Complete

26 Aug, 2024

-
Included w.e.f. 25-2-2022.

192

IS 16333 : Part 3 (2017)

Mobile phone handsets: Part 3 indian language support for mobile phone handsets - Specific requirements (First Revision)

30000 View breakup
(10% Discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1(Inputting of text)	-	15000		Nil
5.2(Message Readability)	-	15000		Nil

Complete

26 Aug, 2024

-
Included w.e.f. 25-2-2022.

193

IS 13334 : Part 1 (2014)

Skimmed milk powder - Specification: Part 1 standard grade (Second Revision)

5200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.6(Bacterial count)	-	500	10% Discount for BIS
5.6(Coliform count )	-	500	10% Discount for BIS
5.6(Escherichia coli)	-	300	-
5.6(Coagulase positive Staphylococcus aureus)	-	300	10% Discount for BIS
5.6(Salmonella)	-	500	10% Discount for BIS
5.6(Spore count, Aerobic (Bacillus cereus))	-	300	-
5.6(Spore count, Anaerobic (Sulfite reducing Clostridia))	-	300	-
5.6(Listeria monocytogenes)	-	300	-
4(Description)	-	100	-
5.2(Absence of extraneous matter, added colour and added flavour)	-	100	-
Cl 5.4(The flavour of the product or of the reconstituted milk shall be pleasant and clean (see IS 10030).)	-	100	-
5.6(Moisture)	-	100	-
5.6(Milk protein in milk solids not fat)	-	300	-
5.6(Milk fat)	-	300	-
5.6(Insolubility index)	-	300	-
5.6(Total ash (on dry basis))	-	300	-
5.6(Titratable acidity (lactic acid))	-	300	-
5.6(Scorched particles)	-	300	-

Complete

26 Aug, 2024

-
Included w.e.f. 25-2-2022.

194

IS 1166 (1986)

Specification for condensed milk, partly skimmed and skimmed condensed milk (Second Revision)

7300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.10.2(Bacteria count)	-	800	10% Discount for BIS
Clause no 4.1.10.2(coliform count)	-	800	10% Discount for BIS
Clause no 4.1.10.3(Yeast & Mould count)	-	800	10% Discount for BIS
Clause no 4.1.10.4(S.aureus)	-	800	10% Discount for BIS
Clause no 4.1.1(Description)	-	100	-
4.1.4(Colour)	-	200	10% Discount for BIS
4.1.5(Flavour and Taste)	-	200	10% Discount for BIS
Table 1 (i) (Apendix B)(Total milk solids -Condensed Milk)	-	200	-
Table 1 (i) (Apendix B)(Total milk solids - Partly Skimmed Condenied Milk)	-	200	10% Discount for BIS
Table 1 (i) (Apendix B)(Total milk solids - Skirmned Condensed Milk)	-	300	10% Discount for BIS
Table 1 (ii) (IS : 11762- 1986)(Fat -Condensed Milk)	-	200	10% Discount for BIS
Table 1 (ii) (IS : 11762- 1986)(Fat -Partly Skimmed Condenied Milk)	-	300	10% Discount for BIS
Table 1 (ii) (IS : 11762- 1986)(Fat -Skirmned Condensed Milk)	-	250	10% Discount for BIS
Table 1 (iii) (Apendix C)(Sucrose -Condensed Milk)	-	250	10% Discount for BIS
Table 1 (iii) (Apendix C)(Sucrose -Partly Skimmed Condenied Milk)	-	250	10% Discount for BIS
Table 1 (iii) (Apendix C)(Sucrose -Skirmned Condensed Milk)	-	250	10% Discount for BIS
Table 1 (vi) (Apendix D)(Titratable acidity (as lactic acid) -Condensed Milk)	-	250	10% Discount for BIS
Table 1 (vi) (Apendix D)(Titratable acidity (as lactic acid) -Partly Skimmed Condenied Milk)	-	250	10% Discount for BIS
Table 1 (vi) (Apendix D)(Titratable acidity (as lactic acid) -Skirmned Condensed Milk)	-	250	10% Discount for BIS
Table 1 (v) (Apendix E)(Accelerated starage test -Condensed Milk)	-	250	10% Discount for BIS
Table 1 (v) (Apendix E)(Accelerated starage test -Partly Skimmed Condenied Milk)	-	250	10% Discount for BIS
Table 1 (v) (Apendix E)(Accelerated starage test -Skirmned Condensed Milk)	-	250	10% Discount for BIS

Complete

26 Aug, 2024

-
-

195

IS 14542 (1998)

Partly skimmed milk powder specification

3950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 1(i)(Moisture Type I (IS 11623))	-	100	-
Table 1(i)(Moisture Type II (IS 11623))	-	100	-
Table 1(ii)(Total solids (milk solids and added salts) Type I (IS 11623))	-	100	-
Table 1(ii)(Total solids (milk solids and added salts) Type II (IS 11623))	-	100	-
Table 1(iii)(Milk fat, Type I (IS I1722))	-	100	-
Table 1(iii)(Milk fat, Type II (IS I1722))	-	100	-
Cl 6.6.1(Bacterial Count (IS 5402))	-	100	-
Cl 6.6.2(Coliform Count ((IS 5402))	-	100	-
Table 1(iv)(Insolubility index, a) Roller dried Type I (IS 12759))	-	100	-
Table 1(iv)(Insolubility index, a) Roller dried Type II (IS 12759))	-	100	-
Table 1(iv)(Insolubility index, b) Spray dried Type I (IS 12759))	-	100	-
Table 1(iv)(Insolubility index, b) Spray dried Type II (IS 12759))	-	100	-
Table 1(v)(Total ash Type I (Annex B of IS 14433 - Part 1))	-	100	-
Table 1(v)(Total ash Type II (Annex B of IS 14433 - Part 1))	-	100	-
Table 1(vi)(Titratable acidity (as lactic acid) Type I (IS 11766))	-	100	-
Table 1(vi)(Titratable acidity (as lactic acid) Type II (IS 11766))	-	100	-
Cl 6.4(Flavour and Taste (IS 10030))	-	100	-
5.1(Description)	-	100	-
6.1(Etraneous matters, added colours and flavours)	-	100	-
6.7 i(Moisture)	-	100	-
6.7 ii(Total solids (milk solids and added salts))	-	100	-
6.7 iii(Milk Fat)	-	100	-
6.7 iv(Insolubiltiy index)	-	100	-
6.7 v(Total ash (on dry basis))	-	100	-
6.7 vi(Titratable acidity as lactic acid)	-	100	-
Table 1(i)(Moisture Type I (IS 11623))	-	100	-
Table 1(i)(Moisture Type II (IS 11623))	-	100	-
Table 1(ii)(Total solids (milk solids and added salts) Type I (IS 11623))	-	100	-
Table 1(ii)(Total solids (milk solids and added salts) Type II (IS 11623))	-	100	-
Table 1(iii)(Milk fat, Type I (IS I1722))	-	50	-
Table 1(iii)(Milk fat, Type II (IS I1722))	-	50	-
Cl 6.6.1(Bacterial Count (IS 5402))	-	50	-
Cl 6.6.2(Coliform Count ((IS 5402))	-	50	-
Table 1(iv)(Insolubility index, a) Roller dried Type I (IS 12759))	-	50	-
Table 1(iv)(Insolubility index, a) Roller dried Type II (IS 12759))	-	50	-
Table 1(iv)(Insolubility index, b) Spray dried Type I (IS 12759))	-	50	-
Table 1(iv)(Insolubility index, b) Spray dried Type II (IS 12759))	-	50	-
Table 1(v)(Total ash Type I (Annex B of IS 14433 - Part 1))	-	50	-
Table 1(v)(Total ash Type II (Annex B of IS 14433 - Part 1))	-	50	-
Table 1(vi)(Titratable acidity (as lactic acid) Type I (IS 11766))	-	50	-
Table 1(vi)(Titratable acidity (as lactic acid) Type II (IS 11766))	-	50	-
Cl 6.4(Flavour and Taste (IS 10030))	-	50	-
5.1(Description)	-	50	-
6.1(Etraneous matters, added colours and flavours)	-	50	-
6.7 i(Moisture)	-	50	-
6.7 ii(Total solids (milk solids and added salts))	-	50	-
6.7 iii(Milk Fat)	-	50	-
6.7 iv(Insolubiltiy index)	-	50	-
6.7 v(Total ash (on dry basis))	-	50	-
6.7 vi(Titratable acidity as lactic acid)	-	50	-

Complete

26 Aug, 2024

-
Included w.e.f. 25-2-2022.

196

IS 1165 (2002)

Milk powder - Specification (First Revision)

6900 View breakup
Rs.6900/- (10% Discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Description)	-	200	10% Discount for BIS
3.2(Flavour and Taste)	-	500	10% Discount for BIS
3.4.5(Moisture)	-	250	10% Discount for BIS
3.4.5(Total solids)	-	500	10% Discount for BIS
3.4.5(Fat)	-	500	10% Discount for BIS
3.4.5(Insolubility index)	-	500	10% Discount for BIS
3.4.5(Total ash)	-	500	10% Discount for BIS
3.4.5(Titratable acidity (lactic acid))	-	250	-
3.5(Bacterial count)	-	800	10% Discount for BIS
3.5.2(Coliform count)	-	800	10% Discount for BIS
3.5.3(Staphylococcus Aureus)	-	800	10% Discount for BIS
3.5.4(Salmonella)	-	800	10% Discount for BIS
3.5.5(Shigella)	-	800	10% Discount for BIS
3.1(Description)	-	0	-
3.2(Flavour and Taste)	-	0	-
3.4.5(Moisture)	-	0	-
3.4.5(Total solids)	-	0	-
3.4.5(Fat)	-	0	-
3.4.5(Insolubility index)	-	0	-
3.4.5(Total ash)	-	0	-
3.4.5(Titratable acidity (lactic acid))	-	0	-
3.5(Bacterial count)	-	0	-
3.5.2(Coliform count)	-	0	-
3.5.3(Staphylococcus Aureus)	-	0	-
3.5.4(Salmonella)	-	0	-
3.5.5(Shigella)	-	0	-

Complete

26 Aug, 2024

-
Included w.e.f. 25-2-2022.

197

IS 12084 (2018)

Morpholine - Specification (First Revision)

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Description)	-	500	10% Discount for BIS
4.2(IS 11255 (Part 6))	-	1000	10% Discount for BIS
4.3 - Table 1 - Sl No - i(Purity (as Morpholine) - Annex B)	-	1000	10% Discount for BIS
4.3 - Table 1 - Sl No - ii(Relative density, 20/20 oC - Annex C)	-	1000	10% Discount for BIS
4.3 - Table 1 - Sl No - v(Residue, on evaporation - Annex D)	-	1000	10% Discount for BIS
4.3 - Table 1 - Sl No - vi(Ash content - Annex E)	-	1000	10% Discount for BIS
4.3 - Table 1 - Sl No - vii(Iron ( as Fe ) - IS 3025 (Part 53))	-	1000	10% Discount for BIS
4.3 - Table 1 - Sl No - viii(Copper ( as Cu ) - IS 3025 (Part 42))	-	1000	10% Discount for BIS
4.3 - Table 1 - Sl No - ix(Nickel ( as Ni ) - IS 3025 (Part 54))	-	1000	10% Discount for BIS
4.3 - Table 1 - Sl No - x(Silica ( as SiO2 ) - IS 3025 (Part 35))	-	1000	10% Discount for BIS
4.3 - Table 1 - Sl No - vi(Chloride ( as Cl ) I IS 3025 (Part 32)	-	1000	10% Discount for BIS

Complete

26 Aug, 2024

-
Included w.e.f. 16-03-2022.

198

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

45000 View breakup
Rs.28,500/- For Wireless key boards

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.5(Components)	-	0	Nil
1.6(Power interface .)	-	2000	Nil
1.7(Markings and instructions)	-	0	Nil
2.1(Protection from electric shock and energy hazards)	-	500	Nil
2.3(TNV circuits)	-	1000	Nil
2.4(Limited current circuits)	-	500	Nil
2.5(Limited power sources .)	-	500	Nil
2.6(Provisions for earthing and bonding)	-	1000	Nil
2.7(Overcurrent and earth fault protection in primary circuits)	-	1000	Nil
2.8(Safety interlocks)	-	0	Nil
2.9(Electrical insulation)	-	1000	Nil
2.10(Clearances, creepage distances and distances through insulation)	-	1000	Nil
3.1(General)	-	2000	Nil
3.2(Connection to a mains supply)	-	1500	Nil
3.3(Wiring terminals for connection of external conductors)	-	1500	Nil
3.4(Disconnection from the mains supply)	-	2000	Nil
3.5(Interconnection of equipment)	-	0	visual inspection test
4.1(Stability)	-	1000	Nil
4.2(Mechanical strength)	-	1000	Nil
4.3(Design and construction)	-	1000	nil
4.4(Protection against hazardous moving parts)	-	2000	Nil
4.5(Thermal requirements)	-	2000	Nil
4.6(Openings in enclosures)	-	3000	Nil
4.7(Resistance to fire)	-	500	Nil
5.1(Touch current and protective conductor curren)	-	1500	Nil
5.2(Electric strength)	-	1500	Nil
5.3(Abnormal operating and fault conditions)	-	1000	Nil
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	1000	Nil
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	2500	Nil
6.3(Protection of the telecommunication wiring system from overheating)	-	2500	Nil
7.1(General)	-	0	visual inspection test
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	20000	Nil
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	2500	Nil
7.4(Insulation between primary circuits and cable distribution systems)	-	500	Nil
2.2(SELV circuits)	-	300	Nil
2.10.4.2(Material Group and Comparative Tracking Index)	-	200	Nil
2.10.5.3(Insulating Compound as Solid Insulation)	-	200	Nil
2.10.5.6(Thin sheet materials)	-	200	Nil
2.10.5.11(SMPS Transformer and Inductor)	-	300	Nil
2.10.5.12(Wires in wound components)	-	300	Nil
2.10.5.13(Winding wire)	-	300	Nil
2.10.5.14(Additional insulation in wound components)	-	200	Nil
2.10.6(PCB material)	-	200	Nil
2.10.8.2(Thermal conditioning (thermal ageing))	-	300	Nil
2.10.8.4(Abrasion resistance test)	-	500	Nil
2.10.9(Thermal Cycling)	-	500	Nil
2.10.10(Test for Pollution Degree 1 environment and for insulating compound)	-	500	Nil
2.10.11(Tests for semiconductor devices and for cemented joints)	-	500	Nil
2.10.12(Enclosed and sealed parts)	-	500	Nil
3.1.4(Internal wire)	-	500	Nil
3.2.4(Appliance inlet /connector)	-	500	Nil
3.2.5(Non re-wirable plug with PVC sheathed cable)	-	500	Nil
Annex K(Thermal Control)	-	500	Nil
Annex B(Motor tests under abnormal conditions)	-	500	Nil
Annex C(Transformers)	-	500	Nil
Annex DD(Requirements for the mounting means of a rack mounted equipment)	-	500	Nil

Complete

26 Aug, 2024

-
Included w.e.f. 26-11-2021. Exclusions: Components (Cl.1.5), Moving parts (Cl.2.8.5), Switches and relays (Cl.2.8.7),Semiconductor devices (Cl.2.10.5.4), Non separable thin sheet material (Cl.2.10.5.8 Annex-AA), AC power supply cord (Cl.3.2.5.1), Cathode ray tubes (Cl.4.2.8), Batteries (Cl.4.3.8), Oil and grease (Cl.4.3.9), Protection in operator wedge probe (household and home/office document /media shredders) (Cl.4.4.2), Ionizing radiation (Cl.4.3.13.2), Effect of ultraviolet (UV) radiation on materials (Cl.4.3.13.3), Human exposure of to ultraviolet (UV) radiation (Cl.4.3.13.4), Effect of lasers (including LEDs) (Cl.4.3.13.5), Insulating winding wires (Annex-U), Evaluation of IC current limiters (Annex-CC), household and home/office document /media shredders (Annex-EE)

199

IS 9473 (2002)

Respiratory protective devices - Filtering half masks to protect against particles - Specification (First Revision)

51500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1(Material)	-	2500	10% Discount to bis
Cl 5.2(Cleaning and Disinfecting)	-	500	10% Discount to bis
Cl 5.3(Practical Performance Test)	-	6500	10% Discount to bis
Cl 5.4(Leakage)	-	10000	10% Discount to bis
Cl 5.5(Compatibility with Skin)	-	500	10% Discount to bis
Cl 5.6(Flammability)	-	3500	10% Discount to bis
Cl 5.7(Carbon Dioxide Content of the Inhalation Air)	-	6500	10% Discount to bis
Cl 5.8(Head Harness)	-	8000	10% Discount to bis
Cl 5.9(Field of Vision)	-	3000	10% Discount to bis
Cl 5.10(Inhalation and Exhalation Valves)	-	5000	10% Discount to bis
Cl 5.11(Breathing Resistance)	-	5000	10% Discount to bis
Cl 5.12(Clogging (Coal & Dolomite))	-	0	Nil
Cl 5.13(De-mountable Parts)	-	500	10% Discount to bis
5.1. 1(Components/ Straps)	-	0	NIL
5.1.2(Face Piece)	-	0	NIL
5.1.3(Material Requirements)	-	0	NIL
5.1.4(Metal Parts)	-	0	NIL
5.4.1.a(Total Inward Leakage (AR-5 Samples) )	-	0	NIL
5.4.1.a(Total Inward Leakage (TC-5 Samples) )	-	0	NIL
5.4.1.b(Total lnward Leakage (AR- 5 Samples) )	-	0	NIL
5.4.1.b(Total Inward Leakage (TC -5 Samples))	-	0	NIL
5.6(Flammability (AR-2 Samples) )	-	0	Nil
5.6(Flammability (TC- 2 Samples) )	-	0	Nil
5.4.2(Penetration of Filter Material (AR-3 Samples) )	-	0	Nil
5.4.2(Penetration of Filter Material (TC-3 Samples) )	-	0	Nil
5.4.2(Penetration of Filter Material (SW-3 Samples) )	-	0	Nil
5.4.2(Penetration of Filter Material (MS-3 Samples) )	-	0	Nil
5.11(Breathing Resistance Test (m bar) Inh.30lpm (AR-3 Samples))	-	0	Nil
5.11(Breathing Resistance Test (m bar) Inh.30lpm (SW-3 Samples))	-	0	Nil
5.11(Breathing Resistance Test (m bar) Inh.30lpm (TC-3 Samples))	-	0	Nil
5.11(Breathing Resistance Test (m bar) Inh.95lpm (SW-3 Samples))	-	0	Nil
5.11(Breathing Resistance Test (m bar) Inh.95lpm (AR-3 Samples))	-	0	Nil
5.11(Breathing Resistance Test (m bar) Inh.95lpm (TC-3 Samples))	-	0	Nil
5.11(Breathing Resistance Test (m bar) Exh.160lpm (TC-3 Samples))	-	0	Nil
5.11(Breathing Resistance Test (m bar) Exh.160lpm (AR-3 Samples))	-	0	Nil
5.11(Breathing Resistance Test (m bar) Exh.160lpm (SW-3 Samples))	-	0	Nil
7.0(Instructions for Use)	-	0	Nil
6.2.2(Marking)	-	0	Nil
6.2.1(Marking)	-	0	Nil
6.1(Packing)	-	0	Nil
5.10.2.4(Exh. Valve Tensile Force (SW-1 Sample) )	-	0	Nil
5.10.2.4(Exh. Valve Tensile Force (AR-1 Sample) )	-	0	Nil
5.10.2.3(Exh. Valve Flow (TC-2 Samples))	-	0	Nil
5.10.2.3(Exh. Valve Flow (AR-1 Sample) )	-	0	Nil
5.10.2.2(Exhalation valve)	-	0	Nil
5.10.1(Inhalation valve)	-	0	Nil
5.8.1(Head Harness)	-	0	NIL
5.8.2(Head Harness)	-	0	NIL
5.11(Breathing Resistance Test (m bar) (SW-3 Samples) )	-	0	NIL
5.4.1(Total Inward Leakage (AR-5 Samples) )	-	0	NIL

Complete

26 Aug, 2024

-
-

200

IS 9873 : Part 7 (2017)

Safety of toys: Part 7 requirements and test methods for finger paints

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.1 (Colourants used in finger paint shall not have any of the health hazard classifications set out in 4.1 (hazard class 3.1 to 3.10) - ISO 8124)	-	500	GST @ 18% extra.
4.2.2 - Table 1, 2(Finger Paint shall not contain Azo colourants that by cleavage of one or more azo groups can produce the primary aromatic amines - Annex C)	-	500	GST @ 18% extra.
4.3 - Annex - D- Table D.1 - Ref 1(Preservatives - Benzoic acid, sodium benzoate (as acid) - EU Cosmetics Legislation)	-	500	GST @ 18% extra.
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	GST @ 18% extra.
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	GST @ 18% extra.
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	312.5	GST @ 18% extra.
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	312.5	GST @ 18% extra.
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	312.5	GST @ 18% extra.
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	312.5	GST @ 18% extra.
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	312.5	GST @ 18% extra.
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	312.5	GST @ 18% extra.
4.5.1.1 - Table 1(Primary aromatic amines - Annex C)	-	500	GST @ 18% extra.
4.5.1.2 - Table 2(Individual carcinogenic primary aromatic amines - Annex C)	-	500	GST @ 18% extra.
4.5.1.2 - Table 2(Total,carcinogenic primary aromatic amines - Annex C)	-	500	GST @ 18% extra.
4.5.2 - Table 3(Impurities - Polychlorinated biphenyls - Annex C)	-	500	GST @ 18% extra.
4.5.2 - Table 3(IImpurities- Hexachlorobenzene - Annex C)	-	500	GST @ 18% extra.
4.5.2 - Table 3(Impurities - Benzo (α) pyrene - Annex C)	-	500	GST @ 18% extra.
4.7(pH value - ISO 787-9)	-	500	GST @ 18% extra.
4.6 - Table 4(Taste and smell - Finger paints shall not be sweetened, flavoured or fragranced - Cl 4.6)	-	500	GST @ 18% extra.
4.9(N-Nitrosamines - N-nitrosodiethanolamine (NDELA) - n EN 71–12:2013, 7.2.1 and Clause 8)	-	1000	GST @ 18% extra.
4.1(Container - Containers used for finger paints shall not have a design that is likely to be mistaken by children with containers of foodstuffs or drinks)	-	500	GST @ 18% extra.
4.8(shall only use binding agents, extenders, humectants and surfactants which are not classified with any of the health hazards set out in in 4.1 (hazards class 3.1 to 3.10))	-	500	GST @ 18% extra.

Complete

26 Aug, 2024

-
-

201

IS 9873 : Part 4 (2017)

Safety of toys: Part 4 swings, slides and similar activity toys for indoor and outdoor family domestic use

19500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1 and 6.2.1( Strength of toys other than swings)	-	500	Nil
4.1.2 and A.4.1.2(Maximum height)	-	500	Nil
4.1.3 and A.4.1.3(Corners and edges on moving parts)	-	250	Nil
4.1.3 and A.4.1.3(Corners and edges other than moving parts)	-	250	Nil
4.1.4.1 and 6.7.1 and Fig.6(Protruding parts)	-	150	Nil
4.1.4.2 and 6.7.1 and Fig.7(All protrusions)	-	150	Nil
4.1.4.3 and 6.7.1 and Fig.8(Upright protrusions)	-	150	Nil
4.1.4.4 and 6.7.2 (Motion rides)	-	150	Nil
4.1.4.5 (Slides)	-	150	Nil
4.1.5 and A.4.1.5.(Climbing and swinging ropes, chains and cables)	-	150	Nil
4.1.6 (Open tubing IS 9873 -1 / ISO 8124-1.)	-	100	Nil
4.2 and A.4.2.(Barriers-Barriers for platforms from 760 mm to 1 000 mm above the ground)	-	166	Nil
4.2 and A.4.2.(Barriers-Barriers for platforms greater than 1 000 mm and up to 1 830 mm above the ground)	-	166	Nil
4.2 and A.4.2.(Barriers for platforms more than 1 830 mm above the ground)	-	166	Nil
4.2 and A.4.2.(Barriers for platforms from 760 mm to 1 000 mm above the ground shall have a maximum vertical opening of 610 mm between the lowermost member of the barrier and the platform that it surrounds.)	-	166	Nil
4.2 and A.4.2.(Barriers for platforms more than 1 000 mm above the ground shall be designed to minimize the likelihood of climbing. Openings within these barriers or between the barrier and the platform surface shall not permit the passage of the torso probe defined in 6.5.1)	-	150	Nil
4.2 and A.4.2. and 6.3(Dynamic strength of barriers and handrails)	-	170	Nil
4.3(Rung ladders, stepladders and stairways)	-	91	Nil
4.3 a and Fig.10(The rung or tread shall have a substantial horizontal stepping surface with a lateral width of 240 mm or more)	-	91	Nil
4.3 b and Fig.10(The distance between the upper surface of the rungs or treads on rung ladders or stepladders shall not be more than 310 mm and on stairways not more 230 mm when measured vertically in accordance with Figure 10.)	-	91	Nil
4.3 c(The surface of the tread shall not be slippery)	-	91	Nil
4.3 d(The diameter or cross-sectional dimension of the rungs on rung ladders)	-	91	Nil
4.3.e(The depth of treads on stepladders with closed risers or stairways)	-	91	Nil
4.3 f(The inclination of stairways)	-	91	Nil
4.3 f(The inclination of stepladders)	-	91	Nil
4.3 f(The inclination of rung ladders)	-	91	Nil
4.3 g(Stairways and stepladders with a height of 1 200 mm or more above the ground shall be provided with a means of continuous hand support from a height of 760 mm)	-	91	Nil
4.3 g(A means of continuous hand support from a height of 760 mm)	-	90	nIL
4.4.1 (Head and neck entrapment)	-	250	nIL
4.4.2(Entrapment of clothing and hair)	-	250	nIL
4.4.3(Entrapment of feet)	-	250	nIL
4.4.4(Entrapment of fingers)	-	250	nIL
4.5.1(Stability of activity toys other than slides, swings and toys with crossbeams - General)	-	666	Nil
4.5.2(Stability of activity toys with a free height of fall of 600 mm or less)	-	667	Nil
4.5.3(Stability of activity toys with a free height of fall of more than 600 mm)	-	667	Nil
4.6.1 and A.4.6.(Stability of slides)	-	93	Nil
4.6.2 a and A.4.6.(Retaining sides for slides -For slides with a height of more than 1 000 mm above the ground, the height, h, of the retaining sides shall be 100 mm or more)	-	93	Nil
4.6.2 b and A.4.6.(Retaining sides for slides - For slides with a height of 1 000 mm or less above the ground, the height, h, of the retaining sides shall be 50 mm or more.)	-	93	Nil
4.6.3 a and A.4.6.(Starting, sliding and run-out section on slides -The starting section for slides with a height of 1 000 mm or less above the ground shall have)	-	93	Nil
4.6.3 a and A.4.6.(Starting, sliding and run-out section on slides -The starting section for slides with a height of 1 000 mm or less above the ground shall have)	-	93	Nil
4.6.3 a and A.4.6.(Starting, sliding and run-out section on slides -The starting section for slides with a height of 1 000 mm or less above the ground shall have)	-	93	Nil
4.6.3 c and A.4.6.(Starting, sliding and run-out section on slides)	-	93	Nil
4.6.3 d and A.4.6.(The angle of inclination to the horizontal of the sliding section)	-	93	Nil
4.6.3 e and A.4.6.(The run-out section for the slide)	-	93	Nil
4.6.3 e and A.4.6.(The run-out section for the slide)	-	93	Nil
4.6.3 e and A.4.6.(The run-out section for the slide)	-	93	Nil
4.6.3 f and A.4.6.(The finishing end of the run-out section shall have a radius of 25 mm or more through at least 90°)	-	93	Nil
4.6.4 and A.4.6.(Roller slides)	-	93	Ni
4.6.4 and A.4.6.(Roller slides)	-	93	Nil
4.6.4 and A.4.6.(Roller slides)	-	93	Nil
4.6.4 and A.4.6.(Roller slides)	-	105	Nil
4.7.1.1 and A.4.7.(Stability of swings and other activity toys with crossbeams)	-	68	Nil
4.7.1.1 and A.4.7.(Stability of swings and other activity toys with crossbeams)	-	68	Nil
4.7.1.1 and A.4.7.(Stability of swings and other activity toys with crossbeams)	-	68	Nil
4.7.1.2 and A.4.7.(Swings with crossbeams more than 1 200 mm above the ground)	-	68	Nil
4.7.1.3 and A.4.7.(Swings intended for children under 36 months with crossbeams 1 200 mm or less above the ground)	-	68	Nil
4.7.2 and A.4.7.2(Strength of crossbeams, swing devices, suspension connectors and suspension couplings)	-	68	Nil
4.7.3.1(Swings intended for children under 36 months)	-	68	Nil
4.7.3.1(Swings intended for children under 36 months)	-	68	Nil
4.7.3.2(Toddler swings without a crossbeam)	-	68	Nil
4.7.5(Minimum clearance between swing elements, and similar equipment and adjacent structures)	-	68	Nil
4.7.5(Free swinging elements)	-	68	Nil
4.7.5(Elements excluding free swinging)	-	68	Nil
4.7.6 and A.4.7.6(Lateral stability of swing elements - The minimum distance between the suspension points of a swing measured along the crossbeam)	-	68	Nil
4.7.7(Minimum clearance between swing elements and the ground - The seating surface of swing elements with flexible means of suspension where the crossbeam height is greater than 1 200 mm)	-	68	Nil
4.7.7(Minimum clearance between swing elements and the ground - Footrests of swing elements)	-	68	Nl
4.7.8 a and A.4.7.8(Suspension connectors and means of suspension)	-	68	Nli
4.7.8 b and A.4.7.8(Suspension connectors and means of suspension)	-	68	Nil
4.7.8 c and A.4.7.8(Ropes used as means of suspension - Diameter )	-	68	Nil
4.7.8 d and A.4.7.8(Straps and chains - Width)	-	68	Nil
4.7.8 d and A.4.7.8(Accessible chains)	-	68	Nil
4.7.8 e and A.4.7.8(Suspension connectors and means of suspension)	-	68	Nil
4.7.8 f and A.4.7.8(Suspension connectors and means of suspension)	-	72	Nil
4.8(Seesaws - The central point of the sitting or standing position of the seesaw shall not exceed a height)	-	500	Nil
4.8(Seesaws - The sitting or standing position of the seesaw may swing out of the horizontal)	-	500	Nli
4.8(Seesaws )	-	500	Nil
4.9(Carousels and rocking toys)	-	667	Ni
4.9(Carousels and rocking toys)	-	667	Nil
4.9(Free height of fall for carousels and rocking toys)	-	666	Nil
4.10.1 and A.4.10(Inflatable activity toys - General)	-	181	Nil
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	181	Nil
4.10.3 and A.4.10(Connection tubes for continuous inflation)	-	181	Nil
4.10.4.1 and A.4.10(Containment - General)	-	181	Nil
4.10.4.2 and A.4.10(Platforms - Any platform intended for sitting or standing)	-	181	Nil
4.10.4.3 and A.4.10(Slopes shall be treated as a platform.)	-	181	Nil
4.10.4.3 and A.4.10(The first metre at the top of slopes)	-	181	Nil
4.10.4.3 and A.4.10(The remaining length of slopes greater than 30° that are 760 mm or more above the ground shall be provided with containing walls with a minimum height of 900 mm.)	-	181	Nil
4.10.4.4 and A.4.10(Safe collapse)	-	181	Nil
4.10.4.4 a and A.4.10(When tested in accordance with 6.9 the minimum time taken for the test load to reach its lowest point )	-	181	Nil
4.10.4.4 b and A.4.10(the opening of any tunnel or squeeze point under any platform shall not be reduced in height by more than 50 % within 30 s.)	-	190	Nil
4.11.1(Paddling pools - General)	-	400	Nil
4.11.2(Edges, points, and small parts)	-	400	Nil
4.11.2(Edges, points, and small parts)	-	400	Nil
4.11.3(Paddling pools with inflatable walls)	-	400	Nil
4.11.3(Paddling pools with inflatable walls)	-	400	Nil
5.1(Labelling)	-	375	Nil
5.2(Assembly and installation instructions)	-	375	Nil
5.3(Maintenance instructions)	-	375	Nil
5.4(Warnings)	-	375	Nil

Complete

26 Aug, 2024

-
Included w.e.f. 07-09-2020. Excluidng cl.4.7.4 Determination of Impact from Swing elements.

202

IS 9873 : Part 9 (2017)

Safety of Toys Part 9 Certain Phthalates Esters in Toys and Children's Products

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	625	GST@18% extra
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	625	GST@18% extra
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	625	GST@18% extra
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	625	GST@18% extra
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	625	GST@18% extra
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	625	GST@18% extra
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	625	GST@18% extra
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	625	GST@18% extra

Complete

26 Aug, 2024

-
Included w.e.f. 16.07.2019

203

IS 9873 : Part 1 (2019)

Safety of toys: Part 1 safety aspects related to mechanical and physical properties (Fourth Revision)

44500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 - 5.24.2( Reasonably foreseeable abuse -Drop Test)	-	27	GST@18% EXTRA
4.2 - 5.24.3( Reasonably foreseeable abuse -Tip-over test for large and bulky toys)	-	27	GST@18% EXTRA
4.2 - 5.24.4( Reasonably foreseeable abuse -Dynamic strength test for wheeled ride-on toys other than toy scooters)	-	30	GST@18% EXTRA
4.2 - 5.24.5( Reasonably foreseeable abuse -Torque test)	-	27	GST@18% EXTRA
4.2 - 5.24.6.2( Reasonably foreseeable abuse -Tension test for seams in soft-filled (stuffed) toys. beanbag-type toys, and other similar filled toys)	-	27	GST@18% EXTRA
4.2 - 5.24.6.3( Reasonably foreseeable abuse -Tension test for pompoms)	-	27	GST@18% EXTRA
4.2 - 5.24.6.4( Reasonably foreseeable abuse -Tension test for protective components)	-	27	GST@18% EXTRA
4.2 - 5.24.6.5( Reasonably foreseeable abuse -Tension test for a projectile with a suction cup)	-	27	GST@18% EXTRA
4.2 - 5.24.7( Reasonably foreseeable abuse -Compression test)	-	27	GST@18% EXTRA
4.2 - 5.24.8.2( Reasonably foreseeable abuse-Flexure test-Wires and other metallic components intended to be bent)	-	27	GST@18% EXTRA
4.2 - 5.24.8.3( Reasonably foreseeable abuse -Flexure test-Wires likely to be bent)	-	27	GST@18% EXTRA
4.3.2 - 5.21( Expanding materials)	-	100	GST@18% EXTRA
4.4.1 - 5.2(Small parts-For children under 36 months)	-	100	GST@18% EXTRA
4.4.2 - 5.2(Small parts-For children 36 months and over but under 72 months )	-	100	GST@18% EXTRA
4.5.1.2 - 5.3(Shape, size and strength of certain toys-Squeeze toys, rattles, and certain other toys and components of toys-Test for shape and size of certain toys)	-	20	GST@18% EXTRA
4.5.1.3 - 5.3(Shape, size and strength of certain toys-Other toys or components of toys with nearly spherical, hemispherical, circular flared, or dome-shaped ends of toys having a mass less than 0,5 kg and intended for children under 18 months-Test for shape and size of certain toys)	-	10	GST@18% EXTRA
4.5.1.4 - 5.3(Shape, size and strength of certain toys-Toy fasteners (e.g. nails, bolts, screws, and pegs) with nearly spherical, hemispherical, or dome-shaped ends intended for children 18 months and over but under 48 months-Test for shape and size of certain toys)	-	10	GST@18% EXTRA
4.5.2 - 5.4(Shape, size and strength of certain toys-Small balls-Small balls test)	-	10	GST@18% EXTRA
4.5.3 - 5.5(Shape, size and strength of certain toys-Pompoms-Test for pompoms)	-	10	GST@18% EXTRA
4.5.4 - 5.6(Shape, size and strength of certain toys- Pre-school play figures-Test for pre-school play figures)	-	10	GST@18% EXTRA
4.5.5(Shape, size and strength of certain toys-Toy pacifiers-Nipple length)	-	10	GST@18% EXTRA
4.5.6(Shape, size and strength of certain toys-Balloons)	-	10	GST@18% EXTRA
4.5.7(Shape, size and strength of certain toys-Marbles)	-	10	GST@18% EXTRA
4.5.8 - a(Shape, size and strength of certain toys-Hemispheric-shaped toys-No of Opening)	-	10	GST@18% EXTRA
4.5.8 - a(Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening in Base)	-	10	GST@18% EXTRA
4.5.8 - a(Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening not in Base)	-	10	GST@18% EXTRA
4.5.8 - b(Shape, size and strength of certain toys-Hemispheric-shaped toys-Extension of divider)	-	10	GST@18% EXTRA
4.5.8 - c(Shape, size and strength of certain toys-Hemispheric-shaped toys-No of Opening)	-	10	GST@18% EXTRA
4.5.8 - c(Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening )	-	10	GST@18% EXTRA
4.5.8 - c(Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening )	-	10	GST@18% EXTRA
4.5.8 - d(Shape, size and strength of certain toys-Hemispheric-shaped toys)	-	10	GST@18% EXTRA
4.5.8 - d(Shape, size and strength of certain toys-Hemispheric-shaped toys-The maximum distance between centrelines of adjacent peaks )	-	10	GST@18% EXTRA
4.5.8 - d(Shape, size and strength of certain toys-Hemispheric-shaped toys-Minimum depth)	-	10	GST@18% EXTRA
4.6.1 a - 5.8(Edges-Accessible sharp edges of glass or metal-Sharp edge test)	-	33	GST@18% EXTRA
4.6.1 b(Edges-Accessible sharp edges of glass or metal- gap between the edge and the adjacent surface)	-	33	GST@18% EXTRA
4.6.2(Edges-Functional sharp edges)	-	33	GST@18% EXTRA
4.6.3 - 5.8(Edges-Edges on metal toys-Sharp edge test)	-	33	GST@18% EXTRA
4.6.4( Edges-Edges on moulded toys)	-	33	GST@18% EXTRA
4.6.5( Edges-Edges on exposed bolts or threaded rod)	-	35	GST@18% EXTRA
4.7.1 - 5.9(Points-Accessible sharp points-sharp-point test)	-	50	GST@18% EXTRA
4.7.2 - a(Points-Functional sharp points)	-	50	GST@18% EXTRA
4.7.2 - b(Points-Functional sharp points)	-	50	GST@18% EXTRA
4.7.3 (Wooden toys)	-	50	GST@18% EXTRA
4.8.1(Projections-General requirments)	-	34	GST@18% EXTRA
4.8.1(Projections-General requirments)	-	33	GST@18% EXTRA
4.8.1(Projections-General requirments)	-	33	GST@18% EXTRA
4.9(a) - 5.24.8.2( Metal wires and rods-wires and other metallic components intended to be bent)	-	16	GST@18% EXTRA
4.9(b) - 5.24.8.3( Metal wires and rods-wires likely to be bent)	-	14	GST@18% EXTRA
4.9 - c( Metal wires and rods)	-	14	GST@18% EXTRA
4.9 - c - 5.8( Metal wires and rods-Sharp edge test)	-	14	GST@18% EXTRA
4.9 - c - 5.9( Metal wires and rods-Sharp Point test)	-	14	GST@18% EXTRA
4.9 - c( Metal wires and rods-Minimum dia of spokes)	-	14	GST@18% EXTRA
4.9 - c( Metal wires and rods-Spokes ends)	-	14	GST@18% EXTRA
4.10(a) - 5.10(Plastic film or plastic bags in packaging and in toys-average thickness)	-	34	GST@18% EXTRA
4.10(a) - 5.10(Plastic film or plastic bags in packaging and in toys- individual thickness)	-	33	GST@18% EXTRA
4.10(a) - 5.10(Plastic film or plastic bags in packaging and in toys- individual thickness)	-	33	GST@18% EXTRA
4.11.2.1(a) - 5.11.2( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-Length of cords and electrical cables)	-	4	GST@18% EXTRA
4.11.2.1(b) - 5.11.3( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-breakaway feature separation test)	-	4	GST@18% EXTRA
4.11.2.1(b) - 5.11.2( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-Length of cords and electrical cables after breakaway feature separation test)	-	4	GST@18% EXTRA
4.11.2.2 - 5.11.2( Cords-Cords in toys intended for children under 18 months--Other cords-free length )	-	7	GST@18% EXTRA
4.11.3.1(a) - 5.11.2( Cords-Cords in toys intended for children 18 months and over but under 36 months-Cords with the potential to tangle-Length of cords and electrical cables)	-	4	GST@18% EXTRA
4.11.3.1(b) - 5.11.3( Cords-Cords in toys intended for children 18 months and over but under 36 months-Cords with the potential to tangle-breakaway feature separation test)	-	4	GST@18% EXTRA
4.11.3.1(b) - 5.11.2( Cords-Cords in toys intended for children 18 months and over but under 36 months-Cords with the potential to tangle-Length of cords and electrical cables after breakaway feature separation test)	-	4	GST@18% EXTRA
4.11.3.2( Cords-Cords in toys intended for children 18 months and over but under 36 months-Other cords)	-	4	GST@18% EXTRA
4.11.3.3 ( Cords-Cords in toys intended for children 18 months and over but under 36 months-Other cords without a free end )	-	4	GST@18% EXTRA
4.11.4(a) - 5.11.4.1(Cords-Fixed loops and nooses intended for children under 36 months-Test for fixed loops and nooses-Head probe push test)	-	4	GST@18% EXTRA
4.11.4(a) - 5.11.4.2(Cords-Fixed loops and nooses intended for children under 36 months-Test for fixed loops and nooses-Elastic materials)	-	4	GST@18% EXTRA
4.11.4(b) - 5.11.3(Cords-Fixed loops and nooses intended for children under 36 months-Breakaway feature separation test)	-	4	GST@18% EXTRA
4.11.5 - 5.11.2(Cords-Cords on pull toys-free length)	-	4	GST@18% EXTRA
4.11.6(Cords- Electrical cables)	-	4	GST@18% EXTRA
4.11.7 - 5.11.1(Cords- Diameter of certain cords intended for children under 36 months-cords cross-sectional dimension)	-	4	GST@18% EXTRA
4.11.8 - 5.11.5(Cords- Self-retracting cords intended for children under 36 months-self-retracting cords)	-	4	GST@18% EXTRA
4.11.9.1(Cords-Toys intended to be strung across a cradle, cot, perambulator or carriage)	-	4	GST@18% EXTRA
4.11.9.2 (Cords-Toys otherwise intended to be attached to a cradle, cot, perambulator or carriage)	-	4	GST@18% EXTRA
4.11.10(Cords-Cords on toy bags)	-	5	GST@18% EXTRA
4.11.11 - 5.11.6( Cords, strings and lines for flying toys- electrical resistance)	-	10	GST@18% EXTRA
4.11.11( Cords, strings and lines for flying toys- )	-	10	GST@18% EXTRA
4.12.1(a - 1)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	10	GST@18% EXTRA
4.12.1(a - 2)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	10	GST@18% EXTRA
4.12.1(a - 3) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys-toy pushchairs and perambulators)	-	10	GST@18% EXTRA
4.12.1(a - 4)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	10	GST@18% EXTRA
4.12.1(a - 5) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	10	GST@18% EXTRA
4.12.1(b - 1)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	10	GST@18% EXTRA
4.12.1(b - 2) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	8	GST@18% EXTRA
4.12.1(b - 3) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	8	GST@18% EXTRA
4.12.2 (a) - 5.22.3(Folding mechanisms-Other toys with folding mechanisms)	-	8	GST@18% EXTRA
4.12.2 (b)(Folding mechanisms-Other toys with folding mechanisms)	-	8	GST@18% EXTRA
4.12.3(Folding mechanisms-Hinge line clearance)	-	8	GST@18% EXTRA
4.13.1(Holes, clearances and accessibility of mechanisms-Circular holes in rigid materials)	-	14	GST@18% EXTRA
4.13.2 (Holes, clearances and accessibility of mechanisms-Accessible clearances for movable segments)	-	14	GST@18% EXTRA
4.13.3(Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys)	-	14	GST@18% EXTRA
4.13.3 - 5.7(Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys-accessibility of a part or component)	-	14	GST@18% EXTRA
4.13.3(Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys)	-	14	GST@18% EXTRA
4.13.4(Holes, clearances and accessibility of mechanisms-Other driving mechanisms)	-	14	GST@18% EXTRA
4.13.5(Holes, clearances and accessibility of mechanisms-Winding keys)	-	16	GST@18% EXTRA
4.14(a)(Springs)	-	33	GST@18% EXTRA
4.14(b)(Springs)	-	33	GST@18% EXTRA
4.14(c)(Springs)	-	34	GST@18% EXTRA
4.15.1.1 - 5.12.2( Stability and overload requirements-Stability of ride-on toys and seats-Sideways stability, feet available for stabilization)	-	33	GST@18% EXTRA
4.15.1.2 - 5.12.3( Stability and overload requirements-Stability of ride-on toys and seats-Sideways stability, feet unavailable for stabilization)	-	33	GST@18% EXTRA
4.15.1.3 - 5.12.4( Stability and overload requirements-Stability of ride-on toys and seats-Fore and aft stability Test)	-	33	GST@18% EXTRA
4.15.2 - 5.12.5( Stability and overload requirements-Overload requirements for ride-on toys and seats-overload test for ride-on toys and seats)	-	33	GST@18% EXTRA
4.15.2 - 5.24.4( Stability and overload requirements-Overload requirements for ride-on toys and seats-dynamic strength test for wheeled ride-on toys other than toy scooters)	-	33	GST@18% EXTRA
4.15.3 - 5.12.6( Stability and overload requirements-Stability of stationary floor toy-Stability test of stationary floor toys)	-	35	GST@18% EXTRA
4.16.1(Enclosures-Ventilation)	-	3	GST@18% EXTRA
4.16.1(Enclosures-Ventilation-No of openings)	-	3	GST@18% EXTRA
4.16.1(Enclosures-Ventilation-Area of Each openings(If two openings))	-	3	GST@18% EXTRA
4.16.1(Enclosures-Ventilation-Distance between openings(If two openings))	-	3	GST@18% EXTRA
4.16.1(Enclosures-Ventilation-Area of Each openings(If One opening))	-	3	GST@18% EXTRA
4.16.1(Enclosures-Ventilation-spacing(If One opening))	-	3	GST@18% EXTRA
4.16.1(Enclosures-Ventilation)	-	3	GST@18% EXTRA
4.16.1(Enclosures-Ventilation)	-	3	GST@18% EXTRA
4.16.2.1(Enclosures-Closures-Lids, doors and similar devices)	-	3	GST@18% EXTRA
4.16.2.1 - 5.13.1(Enclosures-Closures-Lids, doors and similar devices-Test For closures)	-	3	GST@18% EXTRA
4.16.2.2(a)(Enclosures-Closures-Lid support for toy chests and similar toys)	-	3	GST@18% EXTRA
4.16.2.2(a) - 5.13.2.1(Enclosures-Closures-Lid support for toy chests and similar toys-Test For lid support)	-	3	GST@18% EXTRA
4.16.2.2(a) - 5.13.2.2(Enclosures-Closures-Lid support for toy chests and similar toys- After durability test for toy chest lids)	-	3	GST@18% EXTRA
4.16.2.2(a) - 5.13.2.2(Enclosures-Closures-Lid support for toy chests and similar toys-Test For lid support After durability test for toy chest lids)	-	3	GST@18% EXTRA
4.16.2.2(b) - 5.13.2.2(Enclosures-Closures-Lid support for toy chests and similar toys-durability test for toy chest lids)	-	3	GST@18% EXTRA
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 1)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	3	GST@18% EXTRA
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 2)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	3	GST@18% EXTRA
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 3) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys-toy pushchairs and perambulators)	-	3	GST@18% EXTRA
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 4)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	3	GST@18% EXTRA
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 5) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	3	GST@18% EXTRA
4.16.2.2(c) - 5.13.2.2 - 4.12.1(b - 1)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	3	GST@18% EXTRA
4.16.2.2(c) - 5.13.2.2 - 4.12.1(b - 2) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	3	GST@18% EXTRA
4.16.2.2(c) - 5.13.2.2 - 4.12.1(b - 3) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	3	GST@18% EXTRA
4.16.2.2(c) - 5.13.2.2 - 4.12.2 (a) - 5.22.3(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Other toys with folding mechanisms)	-	3	GST@18% EXTRA
4.16.2.2(c) - 5.13.2.2 - 4.12.2 (b)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Other toys with folding mechanisms)	-	3	GST@18% EXTRA
4.16.2.2(c) - 5.13.2.2 - 4.12.3(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Hinge line clearance)	-	3	GST@18% EXTRA
4.16.2.2(d)(Enclosures-Closures-Lid support for toy chests and similar toys)	-	7	GST@18% EXTRA
4.16.3(Enclosures-Toys that enclose the head)	-	3	GST@18% EXTRA
4.16.3(Enclosures-Toys that enclose the head-No of openings)	-	3	GST@18% EXTRA
4.16.3(Enclosures-Toys that enclose the head-Area of Each openings(If two openings))	-	3	GST@18% EXTRA
4.16.3(Enclosures-Toys that enclose the head-Distance between openings(If two openings))	-	3	GST@18% EXTRA
4.16.3(Enclosures-Toys that enclose the head-Area of Each openings(If One opening))	-	3	GST@18% EXTRA
4.17 - 5.14(Simulated protective equipment, such as helmets, hats and goggles-Impact test for toys that cover the face)	-	50	GST@18% EXTRA
4.17(Simulated protective equipment, such as helmets, hats and goggles)	-	50	GST@18% EXTRA
4.18.2(a) - 5.36(Projectile toys-Projectiles-tip assessment of rigid projectiles)	-	5	GST@18% EXTRA
4.18.2(b)(Projectile toys-Projectiles)	-	5	GST@18% EXTRA
4.18.2(c)(Projectile toys-Projectiles)	-	5	GST@18% EXTRA
4.18.2(c)(Projectile toys-Projectiles-Radius)	-	5	GST@18% EXTRA
4.18.2(d) - 5.37(Projectile toys-Projectiles-length of suction cup projectiles)	-	5	GST@18% EXTRA
4.18.2(d) - 5.37 - 5.24.5(Projectile toys-Projectiles-length of suction cup projectiles After torque test)	-	5	GST@18% EXTRA
4.18.2(d) - 5.37 - 5.24.6.5(Projectile toys-Projectiles-length of suction cup projectiles After tension test for a projectile with a suction cup)	-	5	GST@18% EXTRA
4.18.2 - e - 5.24.5(Projectile toys-Projectiles-torque test)	-	5	GST@18% EXTRA
4.18.2 - e - 5.24.6.5(Projectile toys-Projectiles-tension test for a projectile with a suction cup)	-	5	GST@18% EXTRA
4.18.3(a) - 5.2(Projectile toys-Projectile toys with stored energy-small parts test)	-	5	GST@18% EXTRA
4.18.3(a) - 5.3 - 5.24(Projectile toys-Projectile toys with stored energy-small parts test after reasonably foreseeable abuse testing)	-	5	GST@18% EXTRA
4.18.3(a) - 5.4(Projectile toys-Projectile toys with stored energy--small parts test after (wall impact test for projectiles)	-	5	GST@18% EXTRA
4.18.3(b)(Projectile toys-Projectile toys with stored energy)	-	5	GST@18% EXTRA
4.18.3(b)(Projectile toys-Projectile toys with stored energy)	-	5	GST@18% EXTRA
4.18.3(b) - 5.15.1.3.3(Projectile toys-Projectile toys with stored energy-determination of kinetic energy per area of contact)	-	5	GST@18% EXTRA
4.18.3(c ) - 5.24.5(Projectile toys-Projectile toys with stored energy-torque test)	-	5	GST@18% EXTRA
4.18.3(c ) - 5.24.6.4(Projectile toys-Projectile toys with stored energy- tension test for protective components)	-	5	GST@18% EXTRA
4.18.3(c )(Projectile toys-Projectile toys with stored energy)	-	5	GST@18% EXTRA
4.18.3(d) - 5.15.2(Projectile toys-Projectile toys with stored energy-Wall impact test for projectiles)	-	5	GST@18% EXTRA
4.18.3(e )(Projectile toys-Projectile toys with stored energystored energy-Discharge mechanism)	-	5	GST@18% EXTRA
4.18.4.1 - 5.20(Projectile toys-Projectile toys without stored energy-Mouth-actuated projectile toys-durability of mouth-actuated toys)	-	5	GST@18% EXTRA
4.18.4.2(a) - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-determination of the kinetic energy per area of contact when the contact area of the dart shall be at least 3 cm^2)	-	5	GST@18% EXTRA
4.18.4.2(b)(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart)	-	5	GST@18% EXTRA
4.18.4.2(b)(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart)	-	5	GST@18% EXTRA
4.18.4.2(b)(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart)	-	5	GST@18% EXTRA
4.18.4.2(c ) - 5.24.5(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After torque test)	-	5	GST@18% EXTRA
4.18.4.2(c ) - 5.24.5(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After torque test)	-	5	GST@18% EXTRA
4.18.4.2(c ) - 5.24.5(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-Contact area After torque test)	-	5	GST@18% EXTRA
4.18.4.2(c ) - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After tension test for protective components)	-	5	GST@18% EXTRA
4.18.4.2(c ) - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After tension test for protective components)	-	5	GST@18% EXTRA
4.18.4.2(c ) - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-Contact area After tension test for protective components)	-	5	GST@18% EXTRA
4.18.4.3 - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)-kinetic energy per area)	-	5	GST@18% EXTRA
4.18.4.3 - 5.15.2(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)-wall impact test for projectiles)	-	5	GST@18% EXTRA
4.18.4.3(a)(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)	-	3	GST@18% EXTRA
4.18.4.3(b)(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)	-	3	GST@18% EXTRA
4.18.4.3(c)(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)	-	3	GST@18% EXTRA
4.18.4.6 - 5.24.5(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-After torque test)	-	3	GST@18% EXTRA
4.18.4.6 - 5.24.5(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-After torque test)	-	3	GST@18% EXTRA
4.18.4.6 - 5.24.5 - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set- kinetic energy per area After torque test)	-	5	GST@18% EXTRA
4.18.4.6 - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-After tension test for protective components)	-	5	GST@18% EXTRA
4.18.4.6 - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-After tension test for protective components)	-	5	GST@18% EXTRA
4.18.4.6 - 5.24.6.4 - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-kinetic energy per area After tension test for protective components)	-	5	GST@18% EXTRA
4.19(Rotors and propellers)	-	100	GST@18% EXTRA
4.2(Aquatic toys)	-	50	GST@18% EXTRA
4.2(Aquatic toys)	-	50	GST@18% EXTRA
4.2(Aquatic toys)	-	50	GST@18% EXTRA
4.2(Aquatic toys)	-	50	GST@18% EXTRA
4.21(a)(Braking)	-	25	GST@18% EXTRA
4.21(a)(Braking-brake performance for mechanically or electrically powered ride-on toys other than toy bicycles)	-	25	GST@18% EXTRA
4.21(a)(braking)	-	25	GST@18% EXTRA
4.21(b)(braking)	-	25	GST@18% EXTRA
4.22.1(Toy bicycles-Instructions for use)	-	28	GST@18% EXTRA
4.22.2(Toy bicycles-Determination of maximum saddle height)	-	28	GST@18% EXTRA
4.22.2(Toy bicycles-Determination of maximum saddle height)	-	28	GST@18% EXTRA
4.22.3 - 5.16.1(Toy bicycles-Braking requirements-determination of free-wheeling facility)	-	28	GST@18% EXTRA
4.22.3 (Toy bicycles-Braking requirements- brake lever dimension(d))	-	28	GST@18% EXTRA
4.22.3 (Toy bicycles-Braking requirements- lever Length(l))	-	28	GST@18% EXTRA
4.22.3 - 5.16.3(Toy bicycles-Braking requirements- brake performance for toy bicycles)	-	32	GST@18% EXTRA
4.23 - 5.17(Speed limitation of electrically driven ride-on toys-determination of speed of electrically driven ride-on toys)	-	100	GST@18% EXTRA
4.24(a) - 5.18(Toys containing a heat source-determination of temperature increases)	-	20	GST@18% EXTRA
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand-(Parts made of metals))	-	16	GST@18% EXTRA
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand(Parts made of glass or porcelain))	-	16	GST@18% EXTRA
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand(Parts made of Plastic or wood ))	-	16	GST@18% EXTRA
4.24(c) - 5.18(Toys containing a heat source- rise in temperature of other accessible parts of the toy(Parts made of metals))	-	16	GST@18% EXTRA
4.24(c) - 5.18(Toys containing a heat source- rise in temperature of other accessible parts of the toy( Parts made of other materials))	-	16	GST@18% EXTRA
4.25 - 5.19(Liquid-filled toys-leakage of liquid-filled toys)	-	100	GST@18% EXTRA
4.25(Liquid-filled toys)	-	100	GST@18% EXTRA
4.26(a) - 5.2( Mouth-actuated toys-small parts test)	-	50	GST@18% EXTRA
4.26(b) - 5.24.5 - 5.3( Mouth-actuated toys-small parts test after torque test)	-	50	GST@18% EXTRA
4.26(b) - 5.24.6.1 - 5.4( Mouth-actuated toys-small parts test after tension test, general procedure)	-	50	GST@18% EXTRA
4.26(c ) - 5.20 - 5.2( Mouth-actuated toys-small parts test after durability of mouth-actuated toys)	-	50	GST@18% EXTRA
4.27(Toy roller skates, toy inline skates and toy skateboards)	-	100	GST@18% EXTRA
4.28( Percussion caps specifically designed for use in toys)	-	50	GST@18% EXTRA
4.28( Percussion caps specifically designed for use in toys)	-	50	GST@18% EXTRA
4.29(a) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	14	GST@18% EXTRA
4.29(b) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	14	GST@18% EXTRA
4.29(c) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	14	GST@18% EXTRA
4.29(d) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	14	GST@18% EXTRA
4.29(e) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	14	GST@18% EXTRA
4.29(f) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	14	GST@18% EXTRA
4.29(g) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	16	GST@18% EXTRA
4.30.2(Toy scooters-Warnings and instructions for use)	-	20	GST@18% EXTRA
4.30.3 - 5.26 - 5.8(Toy scooters-Strength-After static strength for toy scooters- sharp edge test)	-	20	GST@18% EXTRA
4.30.3 - 5.26 - 5.9(Toy scooters-Strength-static strength for toy scooters-sharp-point test)	-	20	GST@18% EXTRA
4.30.3 - 5.27(Toy scooters-Strength-dynamic strength for toy scooters)	-	20	GST@18% EXTRA
4.30.3 - 5.27(Toy scooters-Strength-dynamic strength for toy scooters)	-	20	GST@18% EXTRA
4.30.3 - 5.29(Toy scooters-Strength-strength of toy scooter steering tubes)	-	20	GST@18% EXTRA
4.30.3 - 5.29(Toy scooters-Strength-strength of toy scooter steering tubes)	-	20	GST@18% EXTRA
4.30.3 - 5.29(Toy scooters-Strength-strength of toy scooter steering tubes)	-	20	GST@18% EXTRA
4.30.4 - 5.12.2(Toy scooters-Stability-sideways stability test, feet available for stabilization)	-	20	GST@18% EXTRA
4.30.5(a)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	20	GST@18% EXTRA
4.30.5(a)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	20	GST@18% EXTRA
4.30.5(b)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	20	GST@18% EXTRA
4.30.5(c)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	20	GST@18% EXTRA
4.30.5(d)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	20	GST@18% EXTRA
4.30.5(e)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	20	GST@18% EXTRA
4.30.5(f) - 5.30( Toy scooters-Adjustable and folding steering tubes and handlebars-resistance to separation of handlebar)	-	20	GST@18% EXTRA
4.30.6 ( Toy scooters-Braking)	-	20	GST@18% EXTRA
4.30.6 ( Toy scooters-Braking)	-	20	GST@18% EXTRA
4.30.6 - 5.28( Toy scooters-Braking- force required to hold the toy)	-	40	GST@18% EXTRA
4.30.7( Toy scooters-Wheel size(diameter))	-	20	GST@18% EXTRA
4.30.8(Toy scooters-Projections)	-	40	GST@18% EXTRA
4.30.8(Toy scooters-Projections(rounded handlebar grips or plugs Diameter))	-	20	GST@18% EXTRA
4.30.8(Toy scooters-Projections(rounded handlebar grips or plugs space from end))	-	20	GST@18% EXTRA
4.31(Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over)	-	12	GST@18% EXTRA
4.31.1 - 5.32(Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over-magnetic flux index)	-	12	GST@18% EXTRA
4.31.1 - 5.2(Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over-small parts test)	-	12	GST@18% EXTRA
4.31.2(a) - 5.32(Magnets and magnetic components-All other toys with magnets and magnetic components-magnetic flux index)	-	12	GST@18% EXTRA
4.31.2(a) - 5.32(Magnets and magnetic components-All other toys with magnets and magnetic components-small parts test)	-	12	GST@18% EXTRA
4.31.2(b) - 5.34 - 5.2(Magnets and magnetic components-All other toys with magnets and magnetic components-soaking test for magnets-small parts test)	-	12	GST@18% EXTRA
4.31.2(c ) - 5.31 - 5.24.2 - 5.24.3 - 5.24.5 - 5.24.6.1 - 5.24.6.2 - 5.33 - 5.31 - 5.32(Magnets and magnetic components-All other toys with magnets and magnetic components-magnetic flux index After Following tests: -tension test for magnets; -drop test/tip over test for large and bulky toys; -torque test; -tension test, general procedure; -tension test for seams in soft-filled (stuffed) toys, beanbag-type toys and other similar filled toys, if applicable; -impact test for magnets; -compression test; -tension test for magnets;)	-	14	GST@18% EXTRA
4.31.2(c ) - 5.31 - 5.24.2 - 5.24.3 - 5.24.5 - 5.24.6.1 - 5.24.6.2 - 5.33 - 5.31 - 5.2(Magnets and magnetic components-All other toys with magnets and magnetic components-small parts test After Following tests: -tension test for magnets; -drop test/tip over test for large and bulky toys; -torque test; -tension test, general procedure; -tension test for seams in soft-filled (stuffed) toys, beanbag-type toys and other similar filled toys, if applicable; -impact test for magnets; -compression test; -tension test for magnets;)	-	14	GST@18% EXTRA
4.32 - 5.38.2( Yo-yo balls - length (lo) of the yo-yo ball tether)	-	50	GST@18% EXTRA
4.32 - 5.38.1( Yo-yo balls - The ratio of the mass m (in grams) to the elastic constant k of the yo-yo ball tether(m/k))	-	50	GST@18% EXTRA
4.33 - 5.11.3(Straps intended to be worn fully or partially around the neck-breakaway feature separation test)	-	100	GST@18% EXTRA
4.34(Sledges and toboggans with cords for pulling)	-	100	GST@18% EXTRA
4.35.3 - 5.39(Jaw entrapment in handles and steering wheels-jaw entrapment test)	-	100	GST@18% EXTRA
9873 (Part - 3) 4.1 - Table 1(Selenium (Se) - Cl 7,8,9 )	-	375	GST@18% EXTRA
9873 (Part - 3) 4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 )	-	375	GST@18% EXTRA
9873 (Part - 3) 4.1 - Table 1(Lead (Pb) - Cl 7,8,9 )	-	375	GST@18% EXTRA
9873 (Part - 3) 4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 )	-	375	GST@18% EXTRA
9873 (Part - 3) 4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9)	-	375	GST@18% EXTRA
9873 (Part - 3) 4.1 - Table 1(Barium (Ba) - Cl 7,8,9 )	-	375	GST@18% EXTRA
9873 (Part - 3) 4.1 - Table 1(Arsenic (As) - Cl 7,8,9 )	-	375	GST@18% EXTRA
9873 (Part - 3) 4.1 - Table 1(Antimony (Sb) - Cl 7,8,9)	-	375	GST@18% EXTRA
9873 (Part - 2) 4.5 - 5.5(Soft-filled toys-Test for soft-filled toys )	-	130	GST@18% EXTRA
9873 (Part - 2) 4.5 - 5.5(Soft-filled toys-rate of spread of flame )	-	130	GST@18% EXTRA
9873 (Part - 2) 4.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	120	GST@18% EXTRA
9873 (Part - 2) 4.4 - 5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	120	GST@18% EXTRA
9873 (Part - 2) 4.4 - 5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	120	GST@18% EXTRA
9873 (Part - 9) 3(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	1500	GST@18% EXTRA
9873 (Part - 9) 3(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	1000	GST@18% EXTRA
9873 (Part - 9) 3(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	1000	GST@18% EXTRA
9873 (Part - 9) 3(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	1500	GST@18% EXTRA
9873 (Part - 2) 4.4 - 5.4(Toys intended to be entered by a child-rate of spread of flame)	-	120	GST@18% EXTRA
9873 (Part - 2) 4.3(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play)	-	120	GST@18% EXTRA
9873 (Part - 2) 4.3 - 5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	120	GST@18% EXTRA
9873 (Part - 2) 4.3 - 5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-rate of spread of flame)	-	120	GST@18% EXTRA
9873 (Part - 1) 4.2.5 - 5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	100	GST@18% EXTRA
9873 (Part - 1) 4.2.5 - 5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-rate of spread of flame)	-	100	GST@18% EXTRA
9873 (Part - 7) 4.10(Container - Containers used for finger paints shall not have a design that is likely to be mistaken by children with containers of foodstuffs or drinks)	-	500	GST@18% EXTRA
9873 (Part - 7) 4.9(N-Nitrosamines - N-nitrosodiethanolamine (NDELA) - n EN 71–12:2013, 7.2.1 and Clause 8)	-	1000	GST@18% EXTRA
9873 (Part - 1) 4.2.4 - 5.3(Toys to be worn on the head-Full or partial moulded head masks-maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-	100	GST@18% EXTRA
9873 (Part - 1) 4.2.4 - 5.3(Toys to be worn on the head-Full or partial moulded head masks-Duration of the flame after the removal of the test flame)	-	100	GST@18% EXTRA
9873 (Part - 1) 4.2.3 - 5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy- maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-	100	GST@18% EXTRA
9873 (Part - 1) 4.2.3 - 5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy-Duration of the flame after the removal of the test flame)	-	100	GST@18% EXTRA
9873 (Part - 1) 4.2.2(b) - 5.3(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was less than 150 mm)	-	100	GST@18% EXTRA
9873 (Part - 1) 4.2.2(a) - 5.3(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was 150 mm or more)	-	100	GST@18% EXTRA
9873 (Part - 1) 4.2.2 - 5.2(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy-Duration of the flame after the removal of the test flame)	-	100	GST@18% EXTRA
9873 (Part - 7) 4.8(shall only use binding agents, extenders, humectants and surfactants which are not classified with any of the health hazards set out in in 4.1 (hazards class 3.1 to 3.10))	-	500	GST@18% EXTRA
9873 (Part - 4) 4.1.1 and 6.2.1( Strength of toys other than swings)	-	2000	GST@18% EXTRA
9873 (Part - 4) 4.1.2 and A.4.1.2(Maximum height)	-	500	GST@18% EXTRA
9873 (Part - 4) 4.1.3 and A.4.1.3(Corners and edges on moving parts)	-	250	GST@18% EXTRA
9873 (Part - 7) 4.7(pH value - ISO 787-9)	-	500	GST@18% EXTRA
9873 (Part - 7) 4.6 - Table 4(Taste and smell - Finger paints shall not be sweetened, flavoured or fragranced - Cl 4.6)	-	500	GST@18% EXTRA
9873 (Part - 7) 4.5.2 - Table 3(Impurities - Benzo (α) pyrene - Annex C)	-	777	GST@18% EXTRA
9873 (Part - 4) 4.1.4.1 and 6.7.1 and Fig.6(Protruding parts)	-	1002	GST@18% EXTRA
9873 (Part - 4) 4.1.4.2 and 6.7.1 and Fig.7(All protrusions)	-	200	GST@18% EXTRA
9873 (Part - 7) 4.5.2 - Table 3(IImpurities- Hexachlorobenzene - Annex C)	-	777	GST@18% EXTRA
9873 (Part - 7) 4.5.2 - Table 3(Impurities - Polychlorinated biphenyls - Annex C)	-	777	GST@18% EXTRA
9873 (Part - 7) 4.5.1.2 - Table 2(Total,carcinogenic primary aromatic amines - Annex C)	-	777	GST@18% EXTRA
9873 (Part - 7) 4.5.1.2 - Table 2(Individual carcinogenic primary aromatic amines - Annex C)	-	777	GST@18% EXTRA
9873 (Part - 7) 4.5.1.1 - Table 1(Primary aromatic amines - Annex C)	-	777	GST@18% EXTRA
9873 (Part - 7) 4.3 - Annex - D - Table D.1 - Ref 2(Preservatives - Ammonium benzoate calcium benzoate, potassium benzoate, magnesium benzoate, MEA-benzoate, methyl benzoate, ethyl benzoate, propyl benzoate, butyl benzoate, isobutyl benzoate, isopropyl benzoate, phenyl benzoate (as acid) - EU Cosmetics Legislation)	-	777	GST@18% EXTRA
9873 (Part - 7) 4.3 - Annex - D - Table D.1 - Ref 1(Preservatives - Benzoic acid, sodium benzoate (as acid) - EU Cosmetics Legislation)	-	777	GST@18% EXTRA
9873 (Part - 4) 4.1.4.4 and 6.7.2 (Motion rides)	-	100	GST@18% EXTRA
9873 (Part - 4) 4.1.4.5 and 6.7.1.2 and Fig.9(Slides)	-	100	GST@18% EXTRA
9873 (Part - 4) 4.1.4.5 (Slides)	-	100	GST@18% EXTRA
9873 (Part - 4) 4.1.5 and A.4.1.5.(Climbing and swinging ropes, chains and cables)	-	100	GST@18% EXTRA
9873 (Part - 4) 4.1.6 (Open tubing IS 9873 -1 / ISO 8124-1.)	-	100	GST@18% EXTRA
9873 (Part - 7) 4.2.2 - Table 1, 2(Finger Paint shall not contain Azo colourants that by cleavage of one or more azo groups can produce the primary aromatic amines - Annex C)	-	784	GST@18% EXTRA
9873 (Part - 7) 4.2.1 (Colourants used in finger paint shall not have any of the health hazard classifications set out in 4.1 (hazard class 3.1 to 3.10) - ISO 8124)	-	777	GST@18% EXTRA
9873 (Part - 4) 4.2 and A.4.2.(Barriers-Barriers for platforms from 760 mm to 1 000 mm above the ground)	-	100	GST@18% EXTRA
9873 (Part - 4) 4.2 and A.4.2.(Barriers-Barriers for platforms greater than 1 000 mm and up to 1 830 mm above the ground)	-	150	GST@18% EXTRA
9873 (Part - 4) 4.2 and A.4.2.(Barriers for platforms more than 1 830 mm above the ground)	-	150	GST@18% EXTRA
9873 (Part - 4) 4.2 and A.4.2.(Barriers for platforms from 760 mm to 1 000 mm above the ground shall have a maximum vertical opening of 610 mm between the lowermost member of the barrier and the platform that it surrounds.)	-	100	GST@18% EXTRA
9873 (Part - 4) 4.2 and A.4.2.(Barriers for platforms more than 1 000 mm above the ground shall be designed to minimize the likelihood of climbing. Openings within these barriers or between the barrier and the platform surface shall not permit the passage of the torso probe defined in 6.5.1)	-	100	GST@18% EXTRA
9873 (Part - 4) 4.2 and A.4.2. and 4.6.2 and 4.6.3(For barriers with an uneven top design)	-	100	GST@18% EXTRA
9873 (Part - 4) 4.2 and A.4.2. and 6.3(Dynamic strength of barriers and handrails)	-	300	GST@18% EXTRA
9873 (Part - 4) 4.3(Rung ladders, stepladders and stairways)	-	90	GST@18% EXTRA
9873 (Part - 4) 4.3 a and Fig.10(The rung or tread shall have a substantial horizontal stepping surface with a lateral width of 240 mm or more)	-	90	GST@18% EXTRA
9873 (Part - 4) 4.3 b and Fig.10(The distance between the upper surface of the rungs or treads on rung ladders or stepladders shall not be more than 310 mm and on stairways not more 230 mm when measured vertically in accordance with Figure 10.)	-	90	GST@18% EXTRA
9873 (Part - 4) 4.3 c(The surface of the tread shall not be slippery)	-	90	GST@18% EXTRA
9873 (Part - 4) 4.3 d(The diameter or cross-sectional dimension of the rungs on rung ladders)	-	90	GST@18% EXTRA
9873 (Part - 4) 4.3.e(The depth of treads on stepladders with closed risers or stairways)	-	90	GST@18% EXTRA
9873 (Part - 4) 4.3 f(The inclination of stairways)	-	90	GST@18% EXTRA
9873 (Part - 4) 4.1.4.3 and 6.7.1 and Fig.8(Upright protrusions)	-	100	GST@18% EXTRA
9873 (Part - 4) 4.1.5 and A.4.1.5.(Climbing and swinging ropes, chains and cables)	-	100	GST@18% EXTRA
9873 (Part - 4) 4.3 f(The inclination of stepladders)	-	90	GST@18% EXTRA
9873 (Part - 4) 4.3 f(The inclination of rung ladders)	-	90	GST@18% EXTRA
9873 (Part - 4) 4.3 g(Stairways and stepladders with a height of 1 200 mm or more above the ground shall be provided with a means of continuous hand support from a height of 760 mm)	-	100	GST@18% EXTRA
9873 (Part - 4) 4.3 g(A means of continuous hand support from a height of 760 mm)	-	90	GST@18% EXTRA
9873 (Part - 4) 4.4.1 (Head and neck entrapment)	-	250	GST@18% EXTRA
9873 (Part - 4) 4.4.2(Entrapment of clothing and hair)	-	250	GST@18% EXTRA
9873 (Part - 4) 4.4.3(Entrapment of feet)	-	250	GST@18% EXTRA
9873 (Part - 4) 4.4.4(Entrapment of fingers)	-	250	GST@18% EXTRA
9873 (Part - 4) 4.5.1(Stability of activity toys other than slides, swings and toys with crossbeams - General)	-	600	GST@18% EXTRA
9873 (Part - 4) 4.5.2(Stability of activity toys with a free height of fall of 600 mm or less)	-	700	GST@18% EXTRA
9873 (Part - 4) 4.5.3(Stability of activity toys with a free height of fall of more than 600 mm)	-	700	GST@18% EXTRA
9873 (Part - 4) 4.6.1 and A.4.6.(Stability of slides)	-	100	GST@18% EXTRA
9873 (Part - 4) 4.6.2 a and A.4.6.(Retaining sides for slides -For slides with a height of more than 1 000 mm above the ground, the height, h, of the retaining sides shall be 100 mm or more)	-	80	GST@18% EXTRA
9874 (Part - 4) 4.6.2 b and A.4.6.(Retaining sides for slides - For slides with a height of 1 000 mm or less above the ground, the height, h, of the retaining sides shall be 50 mm or more.)	-	80	GST@18% EXTRA
9874 (Part - 4) 4.6.3 a and A.4.6.(Starting, sliding and run-out section on slides -The starting section for slides with a height of 1 000 mm or less above the ground shall have)	-	80	GST@18% EXTRA
9874 (Part - 4) 4.6.3 a and A.4.6.(Starting, sliding and run-out section on slides -The starting section for slides with a height of 1 000 mm or less above the ground shall have)	-	80	GST@18% EXTRA
9874 (Part - 4) 4.6.3 a and A.4.6.(Starting, sliding and run-out section on slides -The starting section for slides with a height of 1 000 mm or less above the ground shall have)	-	80	GST@18% EXTRA
9874 (Part - 4) 4.6.3 b and A.4.6.(Starting, sliding and run-out section on slides-The starting section for slides with a height of more than 1 000 mm above the ground shall have)	-	80	GST@18% EXTRA
9874 (Part - 4) 4.6.3 b and A.4.6.(Starting, sliding and run-out section on slides-The starting section for slides with a height of more than 1 000 mm above the ground shall have)	-	80	GST@18% EXTRA
9874 (Part - 4) 4.6.3 b and A.4.6.(Starting, sliding and run-out section on slides-The starting section for slides with a height of more than 1 000 mm above the ground shall have)	-	80	GST@18% EXTRA
9874 (Part - 4) 4.6.3 c and A.4.6.(Starting, sliding and run-out section on slides)	-	80	GST@18% EXTRA
9874 (Part - 4) 4.6.3 d and A.4.6.(The angle of inclination to the horizontal of the sliding section)	-	80	GST@18% EXTRA
9874 (Part - 4) 4.6.3 e and A.4.6.(The run-out section for the slide)	-	75	GST@18% EXTRA
9874 (Part - 4) 4.6.3 e and A.4.6.(The run-out section for the slide)	-	75	GST@18% EXTRA
9874 (Part - 4) 4.6.3 e and A.4.6.(The run-out section for the slide)	-	75	GST@18% EXTRA
9874 (Part - 4) 4.6.3 f and A.4.6.(The finishing end of the run-out section shall have a radius of 25 mm or more through at least 90°)	-	75	GST@18% EXTRA
9874 (Part - 4) 4.6.4 and A.4.6.(Roller slides)	-	75	GST@18% EXTRA
9874 (Part - 4) 4.6.4 and A.4.6.(Roller slides)	-	75	GST@18% EXTRA
9874 (Part - 4) 4.6.4 and A.4.6.(Roller slides)	-	75	GST@18% EXTRA
9874 (Part - 4) 4.6.4 and A.4.6.(Roller slides)	-	75	GST@18% EXTRA
9874 (Part - 4) 4.7.1.1 and A.4.7.(Stability of swings and other activity toys with crossbeams)	-	60	GST@18% EXTRA
9874 (Part - 4) 4.7.1.1 and A.4.7.(Stability of swings and other activity toys with crossbeams)	-	60	GST@18% EXTRA
9874 (Part - 4) 4.7.1.2 and A.4.7.(Swings with crossbeams more than 1 200 mm above the ground)	-	60	GST@18% EXTRA
9874 (Part - 4) 4.7.1.3 and A.4.7.(Swings intended for children under 36 months with crossbeams 1 200 mm or less above the ground)	-	60	GST@18% EXTRA
9874 (Part - 4) 4.7.2 and A.4.7.2(Strength of crossbeams, swing devices, suspension connectors and suspension couplings)	-	60	GST@18% EXTRA
9874 (Part - 4) 4.7.3.1(Swings intended for children under 36 months)	-	60	GST@18% EXTRA
9874 (Part - 4) 4.7.3.2(Toddler swings without a crossbeam)	-	60	GST@18% EXTRA
9874 (Part - 4) 4.7.5(Minimum clearance between swing elements, and similar equipment and adjacent structures)	-	60	GST@18% EXTRA
9874 (Part - 4) 4.7.5(Free swinging elements)	-	60	GST@18% EXTRA
9874 (Part - 4) 4.7.5(Elements excluding free swinging)	-	60	GST@18% EXTRA
9874 (Part - 4) 4.7.6 and A.4.7.6(Lateral stability of swing elements - The minimum distance between the suspension points of a swing measured along the crossbeam)	-	120	GST@18% EXTRA
9874 (Part - 4) 4.7.7(Minimum clearance between swing elements and the ground - The seating surface of swing elements with flexible means of suspension where the crossbeam height is greater than 1 200 mm)	-	60	GST@18% EXTRA
9874 (Part - 4) 4.7.7(Minimum clearance between swing elements and the ground - The seating surface of swing elements with rigid means of suspension where the crossbeam height is greater than 1 200 mm)	-	60	GST@18% EXTRA
9874 (Part - 4) 4.7.7(Minimum clearance between swing elements and the ground - The seating surface of swing elements where the crossbeam height is 1 200 mm or less)	-	60	GST@18% EXTRA
9874 (Part - 4) 4.7.7(Minimum clearance between swing elements and the ground - Footrests of swing elements)	-	60	GST@18% EXTRA
9874 (Part - 4) 4.7.8 a and A.4.7.8(Suspension connectors and means of suspension)	-	60	GST@18% EXTRA
9874 (Part - 4) 4.7.8 b and A.4.7.8(Suspension connectors and means of suspension)	-	60	GST@18% EXTRA
9874 (Part - 4) 4.7.8 c and A.4.7.8(Ropes used as means of suspension - Diameter )	-	60	GST@18% EXTRA
9874 (Part - 4) 4.7.8 d and A.4.7.8(Straps and chains - Width)	-	60	GST@18% EXTRA
9874 (Part - 4) 4.7.8 d and A.4.7.8(Accessible chains)	-	60	GST@18% EXTRA
9874 (Part - 4) 4.7.8 e and A.4.7.8(Suspension connectors and means of suspension)	-	60	GST@18% EXTRA
9874 (Part - 4) 4.7.8 f and A.4.7.8(Suspension connectors and means of suspension)	-	60	GST@18% EXTRA
9874 (Part - 4) 4.8(Seesaws - The central point of the sitting or standing position of the seesaw shall not exceed a height)	-	500	GST@18% EXTRA
9874 (Part - 4) 4.8(Seesaws - The sitting or standing position of the seesaw may swing out of the horizontal)	-	500	GST@18% EXTRA
9874 (Part - 4) 4.8(Seesaws )	-	500	GST@18% EXTRA
9874 (Part - 4) 4.9(Carousels and rocking toys)	-	700	GST@18% EXTRA
9874 (Part - 4) 4.9(Free height of fall for carousels and rocking toys)	-	600	GST@18% EXTRA
9874 (Part - 4) 4.10.1 and A.4.10(Inflatable activity toys - General)	-	95	GST@18% EXTRA
9874 (Part - 4) 4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	95	GST@18% EXTRA
9874 (Part - 4) 4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	95	GST@18% EXTRA
9874 (Part - 4) 4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	95	GST@18% EXTRA
9874 (Part - 4) 4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	95	GST@18% EXTRA
9874 (Part - 4) 4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	95	GST@18% EXTRA
9874 (Part - 4) 4.10.3 and A.4.10(Connection tubes for continuous inflation)	-	95	GST@18% EXTRA
9874 (Part - 4) 4.10.4.1 and A.4.10(Containment - General)	-	95	GST@18% EXTRA
9874 (Part - 4) 4.10.4.1 and A.4.10(Containment - General)	-	95	GST@18% EXTRA
9874 (Part - 4) 4.10.4.1 and A.4.10(Containment - General)	-	95	GST@18% EXTRA
9874 (Part - 4) 4.10.4.2 and A.4.10(Platforms - Any platform intended for sitting or standing)	-	95	GST@18% EXTRA
9874 (Part - 4) 4.10.4.2 and A.4.10(Containment walls with a minimum height )	-	95	GST@18% EXTRA
9874 (Part - 4) 4.10.4.2 and A.4.10(Permanently roofed Containment walls)	-	95	GST@18% EXTRA
9874 (Part - 4) 4.10.4.3 and A.4.10(Slopes shall be treated as a platform.)	-	95	GST@18% EXTRA
9874 (Part - 4) 4.10.4.3 and A.4.10(The first metre at the top of slopes)	-	95	GST@18% EXTRA
9874 (Part - 4) 4.10.4.3 and A.4.10(The remaining length of slopes greater than 30° that are 760 mm or more above the ground shall be provided with containing walls with a minimum height of 900 mm.)	-	95	GST@18% EXTRA
9874 (Part - 4) 4.10.4.4 and A.4.10(Safe collapse)	-	95	GST@18% EXTRA
9874 (Part - 4) 4.10.4.4 a and A.4.10(When tested in accordance with 6.9 the minimum time taken for the test load to reach its lowest point )	-	100	GST@18% EXTRA
9874 (Part - 4) 4.10.4.4 b and A.4.10(the opening of any tunnel or squeeze point under any platform shall not be reduced in height by more than 50 % within 30 s.)	-	95	GST@18% EXTRA
9874 (Part - 4) 4.11.1(Paddling pools - General)	-	320	GST@18% EXTRA
9874 (Part - 4) 4.11.2(Edges, points, and small parts)	-	320	GST@18% EXTRA
9874 (Part - 4) 4.11.2(Edges, points, and small parts)	-	320	GST@18% EXTRA
9874 (Part - 4) 4.11.3(Paddling pools with inflatable walls)	-	320	GST@18% EXTRA
9874 (Part - 4) 4.11.3(Paddling pools with inflatable walls)	-	320	GST@18% EXTRA
9874 (Part - 4) 5.1(Labelling)	-	100	GST@18% EXTRA
9874 (Part - 4) 5.2(Assembly and installation instructions)	-	100	GST@18% EXTRA
9874 (Part - 4) 5.3(Maintenance instructions)	-	100	GST@18% EXTRA
9874 (Part - 4) 5.4(Warnings)	-	100	GST@18% EXTRA
9873 (Part - 4) 4.1.3 and A.4.1.3(Corners and edges other than moving parts)	-	250	GST@18% EXTRA
9874 (Part - 4) 4.9(Carousels and rocking toys)	-	700	GST@18% EXTRA
9874 (Part - 4) 4.10.4.1 and A.4.10(Containment - General)	-	95	GST@18% EXTRA
9873 (Part - 1) 4.30.3 - 5.26(Toy scooters-Strength-static strength for toy scooters)	-	0	GST@18% EXTRA
4.30.3 - 5.26(Toy scooters-Strength-static strength for toy scooters)	-	0	GST@18% EXTRA
4.30.3 - 5.27 - 5.8(Toy scooters-Strength-dynamic strength for toy scooters- sharp-edge test)	-	0	GST@18% EXTRA
4.30.3 - 5.27 - 5.9(Toy scooters-Strength-dynamic strength for toy scooters-sharp-point test)	-	0	GST@18% EXTRA
4.1(Normal use)	-	0	GST@18% EXTRA
5.24.6.1(Tension Test General procedure)	-	0	GST@18% EXTRA
4.3.1(Material quality)	-	0	GST@18% EXTRA

Complete

26 Aug, 2024

-
Included w.e.f. 19 Aug 2020

204

IS 15410 (2003)

Containers for packaging of natural mineral water and packaged drinking water - Specification

5500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.6.5(MIGRATION TEST)	-	1000	10% discount to BIS
4.6.6(PORTABILITY TEST)	-	1000	10% discount to BIS
4.6.2(TRANSPARANCY)	-	500	10% discount to BIS
4.6.3(LEAKAGE TEST)	-	1000	10% discount to BIS
4.6.4(DROP TEST)	-	500	10% discount to BIS
4.0 (chem)(MATERIAL)	-	400	10% discount to BIS
4.5, IS:2798:1998(Wall thickness- Bottom, in mm)	-	200	10% discount to BIS
Cl. 4.5(Cl. 4.5 Wall Thickness (Middle))	-	200	10% discount to BIS
4.5, IS:2798:1998(Wall thickness- Top , in mm )	-	200	10% discount to BIS
Cl. 4.6.3(Cl. 4.6.3 Air Pressure Leakage)	-	0	NIL
4.6.3, clause 6 of IS:2798:1998(Leakage test- b. Vibration leakage)	-	0	NIL
4.6.3, clause 6 of IS:2798:1998(Leakage test- a. Closure leakage )	-	0	NIL
4.4 (b)(Brimful Capacity)	-	100	10% discount to BIS
4.1(Material)	-	100	10% discount to BIS
Cl. 4.4 (a)(Capacity)	-	100	10% discount to BIS
Cl. 4.3.2(Cl. 4.3.2 Finish & Appearance)	-	0	NIL
Cl. 4.2(Cl. 4.2 Design, Shape & Dimension)	-	100	10% discount to BIS
4.3 (chem)(Workmanship, Finish & Appearance)	-	100	10% discount to BIS
4.6.6 (chem)(Water Potability test (after 30 days) (a) Taste (b) Odour)	-	0	NIL
4.6.5 , IS:9845:1998 (chem)(Migration- a. Amount of extractive)	-	0	NIL
4.6.5 , IS:9845:1998 (chem)(Migration- b. Amount of extractive)	-	0	Nil
4.6.5 , IS:9845:1998 (chem)(Migration of Caps - a. Amount of extractive)	-	0	NIL
4.6.5.1 (chem)(Colour migration (Container))	-	0	NIL
4.6.5.1 (chem)(Colour migration (Caps))	-	0	NIL

Complete

26 Aug, 2024

-
Included w.e.f.21-08-2020

205

IS 13428 (2005)

Packaged natural mineral water specification (Second Revision)

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2 Table-1 i(Colour)	-	450	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-1 ii(Odour)	-	150	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-1 iii(Taste)	-	150	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-1 iv(Turbidity)	-	250	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-1 v(Total dissolved solids)	-	350	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-1 vi(pH)	-	150	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-2 i(Nitrate (as NO3))	-	350	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-2 ii(Nitrite (as NO2))	-	450	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-2 iii(Sulphide (as H2S))	-	350	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-2 iv(Manganese (as Mn))	-	350	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-2 v(Copper (as Cu))	-	350	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-2 vi(Zinc (as Zn))	-	350	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-2 vii(Flouride (as F))	-	250	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-2 viii(Barium (as Ba))	-	350	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-2 ix(Antimony (as Sb))	-	350	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-2 x(Borates (as B))	-	500	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-2 xi(Silver (as Ag))	-	350	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-2 xii(Chloride (as Cl))	-	250	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-2 xiii(Sulphate (as SO4),)	-	250	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-2 xiv(Magnesium (as Mg))	-	250	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-2 xv(Calcium (as Ca))	-	250	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-2 xvi(Sodium (as Na))	-	250	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-2 xvii(Alkalinity (as HCO3))	-	250	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-2 xviii(Selenium (as Se))	-	350	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-2 xix(Mineral Oil)	-	800	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-2 xx(Phenolic compounds (as C6H5OH))	-	450	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-2 xxi(Anionic surface active agents (as MBAS))	-	1000	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-3 i(Arsenic (as As))	-	500	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-3 ii(Cadmium (as Cd))	-	350	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-3 iii(Cyanide (as CN))	-	800	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-3 iv(Chromium (as Cr))	-	350	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-3 v(Mercury (as Hg))	-	500	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-3 vi(Lead (as Pb)	-	350	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-3 vii(Nickel (as Ni))	-	350	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-3 viii(Polychlorinated biphenyle (PCB))	-	1500	20% Discount to BIS. GST @18% will be charged extra.
6.2 Table-3 ix(Polynuclear aromatic hydrocarbons)	-	1500	20% Discount to BIS. GST @18% will be charged extra.
6.3(α-HCH)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(β-HCH)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(δ-HCH)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(γ-HCH (Lindane))	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(α Endosulfan)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(β Endosulfan)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(Endosulfan Sulphate)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(o,p DDD)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(p,p DDD)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(o,p DDE)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(p, DDE)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(o,p DDT)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(p,p DDT)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(Alachlor)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(Butachlor)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(Chlorpyrifos)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(Atrazine)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(Aldrin)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(Dieldrin)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(2,4-D)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(Ethion)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(Monocrotophos)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(Phorate)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(phorate sulphone)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(Phorate sulphoxide)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(Methyl Paraoxon)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(Methyl Parathion)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(Malaoxon)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(Malathion)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.3(Isoproturon)	-	120	20% Discount to BIS. GST @18% will be charged extra.
6.1.1(Escherichia coli(or thermotolerant bacteria))	-	350	20% Discount to BIS. GST @18% will be charged extra.
6.1.2(Coliform , bacteria)	-	350	20% Discount to BIS. GST @18% will be charged extra.
6.1.3(Faecal Streptococci )	-	200	20% Discount to BIS. GST @18% will be charged extra.
6.1.3(Staphylococcus Aureus)	-	200	20% Discount to BIS. GST @18% will be charged extra.
6.1.4(Sulphite Reducing Anaerobes )	-	400	20% Discount to BIS. GST @18% will be charged extra.
6.1.5(Pseudomonas Aeruginosa )	-	800	20% Discount to BIS. GST @18% will be charged extra.
6.1.6(Yeast and Mould )	-	400	20% Discount to BIS. GST @18% will be charged extra.
6.1.7(Salmonella )	-	200	20% Discount to BIS. GST @18% will be charged extra.
6.1.7(Shigella)	-	200	20% Discount to BIS. GST @18% will be charged extra.
6.1.8(Vibrio cholera )	-	200	20% Discount to BIS. GST @18% will be charged extra.
6.1.8(Vibrio parahemolyticus)	-	200	20% Discount to BIS. GST @18% will be charged extra.

Complete

26 Aug, 2024

-
Excluding: Radioactive Residues & Uranium (Cl.5.3, Table 3)

206

IS 15609 (2005)

Polyethylene flexible pouches for the packing of natural mineral water and packaged drinking water - Specification

6900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1 Annex E(Water Potability test (after 30 Days) a) Taste b) Odour)	-	0	18% GST EXTRA
6.1.4(Odour)	-	0	18% GST EXTRA
6.1.7 IS: 9845:1998(Migration- a. Amount of extractive )	-	500	18% GST EXTRA
6.1.7 IS: 9845:1998(Migration- b. Colour migration)	-	500	18% GST EXTRA
5(Material)	-	0	18% GST EXTRA
6.1.1(Description)	-	0	18% GST EXTRA
6.1.2(Film Form)	-	0	18% GST EXTRA
6.1.3(Winding of the Film )	-	0	18% GST EXTRA
6.1.5 A-2 of IS: 2508:2016(Thickness)	-	0	18% GST EXTRA
6.1.6(Width)	-	0	-
6.1.8 Annex 4 of IS:2508:2016(Tensile Strength a. Lengthwise direction)	-	400	18% GST EXTRA
6.1.8 Annex 4 of IS:2508:2016(Tensile Strength b. Crosswise direction)	-	400	18% GST EXTRA
6.1.9 Annex 4 of IS:2508:2016(Elongation at break - a. Lengthwise direction)	-	250	18% GST EXTRA
6.1.9 Annex 4 of IS:2508:2016(Elongation at break - b. Crosswise direction)	-	250	18% GST EXTRA
6.1.10 Annex -6 of IS:2508:2016(Dart impact Resistance)	-	500	18% GST EXTRA
7.2 Annex F(Stack Load test)	-	500	18% GST EXTRA
7.3 Annex G(Drop test )	-	500	18% GST EXTRA
7.4 Annex H(Ink adhesion test for printed pouches)	-	300	18% GST EXTRA
7.5 Annex J(Product resistance test for printed pouches)	-	300	18% GST EXTRA
Cl. 7.1(Vibration Leakage Test)	-	500	18% GST EXTRA
Clause 7.2(Water Potability test (after 30 Days) a) Taste b) Odour)	-	2000	18% GST EXTRA

Complete

26 Aug, 2024

-
Included w.e.f.21-08-2020

207

IS 9873 : Part 2 (2017)

Safety of toys: Part 2 flammability (Third Revision)

2000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.2-5.2(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy-Duration of the flame after the removal of the test flame)	-	111	10 % Discount to BIS
4.2.2(a)-5.2(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was 150 mm or more)	-	111	10 % Discount to BIS
4.2.2(b)-5.2(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was less than 150 mm)	-	111	10 % Discount to BIS
4.2.3-5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy-Duration of the flame after the removal of the test flame)	-	111	10 % Discount to BIS
4.2.3-5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy- maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-	111	10 % Discount to BIS
4.2.4-5.3(Toys to be worn on the head-Full or partial moulded head masks-Duration of the flame after the removal of the test flame)	-	111	10 % Discount to BIS
4.2.4-5.3(Toys to be worn on the head-Full or partial moulded head masks-maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-	111	10 % Discount to BIS
4.2.5-5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-rate of spread of flame)	-	111	10 % Discount to BIS
4.2.5-5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	111	10 % Discount to BIS
4.3-5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-rate of spread of flame)	-	111	10 % Discount to BIS
4.3-5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	111	10 % Discount to BIS
4.3(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play)	-	111	10 % Discount to BIS
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame)	-	111	10 % Discount to BIS
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	111	10 % Discount to BIS
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	111	10 % Discount to BIS
4.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	111	10 % Discount to BIS
4.5-5.5(Soft-filled toys-rate of spread of flame )	-	111	10 % Discount to BIS
4.5-5.5(Soft-filled toys-Test for soft-filled toys )	-	113	10 % Discount to BIS

Complete

26 Aug, 2024

-
Included w.e.f. 16.07.2019

208

IS 14543 (2016)

Packaged drinking water (Other Than Packaged Natural Mineral Water) - Specification (Second Revision)

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.3 Table-2 xxv(Bromates (as BrO3),)	-	2000	20% Discount for BIS. 18% GST will be charged extra.
5.2.9(Vibrio parahaemolyticus)	-	200	20% Discount for BIS. 18% GST will be charged extra.
5.2.9(Vibrio cholera)	-	200	20% Discount for BIS. 18% GST will be charged extra.
5.2.8(Shigella)	-	200	20% Discount for BIS. 18% GST will be charged extra.
5.2.8(Salmonella)	-	200	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-1 i(Colour)	-	450	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-1 ii(Odour)	-	150	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-1 iii(Taste)	-	150	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-1 iv(Turbidity)	-	250	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-1 v(Total dissolved solids)	-	350	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-1vi(pH)	-	150	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-2 i(Barium (as Ba))	-	350	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-2 ii(Copper (as Cu))	-	350	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-2 iii(Iron (as Fe),)	-	250	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-2 iv(Manganese (as Mn))	-	350	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-2 v(Nitrate (as NO3))	-	350	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-2 vi(Nitrite (as NO2))	-	450	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-2vii(Fluoride (as F))	-	250	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-2 viii(Zinc (as Zn))	-	350	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-2 ix(Silver (as Ag))	-	350	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-2 x(Aluminium (as Al))	-	500	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-2 xi(Chloride (as Cl))	-	250	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-2 xii(Selenium (as Se),)	-	350	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-2 xiii(Sulphate (as SO4),)	-	250	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-2 xiv(Alkaliniity (as HCO3))	-	250	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-2 xv(Calcium (as Ca),)	-	250	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-2 xvi(Magnesium (as Mg))	-	250	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-2 xvii(Sodium (as Na))	-	250	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-2 xviii(Residual free chlorine)	-	250	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-2 xix (Phenolic compounds (as C6H5OH))	-	450	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-2 xx(Mineral oil)	-	800	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-2 xxi (Anionic surface active agents (as MBAS))	-	1000	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-2 xxii(Sulphide (as H2S))	-	350	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-2 xxiii(Antimony (as Sb))	-	350	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-2 xxiv(Borates (as B))	-	500	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-3 i(Mercury (as Hg))	-	500	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-3 ii(Cadmium (as Cd))	-	350	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-3 iv (Cyanide (as CN))	-	800	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-3 v(Lead (as Pb))	-	500	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-3 vi(Chromium (as Cr))	-	350	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-3 vii(Nickel (as Ni))	-	350	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-3 iii(Arsenic (as As))	-	500	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-3 viii (Polychlorinated biphenyle (PCB))	-	1500	20% Discount for BIS. 18% GST will be charged extra.
5.3 Table-3 ix (Polynuclear aromatic hydrocarbons)	-	1500	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(alpha-HCH)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(beta-HCH)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(Gamma-HCH (Lindane))	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(Delta-HCH)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(alpha-Endosulfan)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(beta-Endosulfan)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(Endosulfan Sulphate)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(o,p DDD)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(p,p DDD)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(o,p DDE)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(p,p DDE)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(o,p DDT)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(p,p DDT)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(Alachlor)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(Butachlor)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(Chlorpyrifos)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(Atrazine)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(Aldrin)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(Dieldrin)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(2,4-D)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(Ethion)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(Monocrotophos)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(Phorate)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(Phorate sulphoxide)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(phorate sulphone)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(Malaoxon)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(Malathion)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(Methyl Paraoxon)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(Methyl Parathion)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.4 i)(Isoproturon)	-	120	20% Discount for BIS. 18% GST will be charged extra.
5.2.7(Yeast and Mould)	-	400	20% Discount for BIS. 18% GST will be charged extra.
5.2.6(Aerobic Microbial Count at 37°C)	-	200	20% Discount for BIS. 18% GST will be charged extra.
5.2.6(Aerobic Microbial Count at 20-22°C)	-	200	20% Discount for BIS. 18% GST will be charged extra.
5.2.5(Pseudomonas Aeruginosa)	-	800	20% Discount for BIS. 18% GST will be charged extra.
5.2.4(Sulphite Reducing Anaerobes)	-	400	20% Discount for BIS. 18% GST will be charged extra.
5.2.3(Staphylococcus Aureus)	-	200	20% Discount for BIS. 18% GST will be charged extra.
5.2.3(Faecal Streptococci)	-	200	20% Discount for BIS. 18% GST will be charged extra.
5.2.2(Coliform)	-	350	20% Discount for BIS. 18% GST will be charged extra.
5.2.1(Escherichia coli (or thermotolerant bacteria))	-	350	20% Discount for BIS. 18% GST will be charged extra.

Complete

26 Aug, 2024

-
-

209

IS 9873 : Part 3 (2017)

Safety of toys: Part 3 migration of certain elements (Second Revision)

3000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1 - Table 1(Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	375	GST @ 18% extra
4.1 - Table 1(Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	375	GST @ 18% extra
4.1 - Table 1(Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	375	GST @ 18% extra
4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	375	GST @ 18% extra
4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	375	GST @ 18% extra
4.1 - Table 1(Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	375	GST @ 18% extra
4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	375	GST @ 18% extra
4.1 - Table 1(Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	375	GST @ 18% extra

Complete

26 Aug, 2024

-
REVISED VERWION OF IS 9873 PT-3):2020 INCLUDED W.E.F. 20-07-2021.

Bureau of Indian Standards

The National Standards Body of India

ALPHA TEST HOUSE PRIVATE LIMITED

198-199, M.I.E, PHASE-I, BAHADURGARH, HARYANA-124507, Bahadurgarh, Jhajjar, Haryana, 124507

9711227171 info@alphatesthouse.com

Scope List