BIS - LIMS (Laboratory Information Management System)

EMC Testing and Compliance LLP

115, Pace City-1, Sector 37, Gurugram, Gurugram, Haryana, 122001

8130427070 info@emclab.co.in

Scope List

Reset

73 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 9873 : Part 1 (2019)

Safety of toys: Part 1 safety aspects related to mechanical and physical properties (Fourth Revision)

Electric & Non-Electric Toys

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 - 5.24.2( Reasonably foreseeable abuse -Drop Test)	-	200	-
4.2 - 5.24.3( Reasonably foreseeable abuse -Tip-over test for large and bulky toys)	-	200	-
4.2 - 5.24.4( Reasonably foreseeable abuse -Dynamic strength test for wheeled ride-on toys other than toy scooters)	-	200	-
4.2 - 5.24.5( Reasonably foreseeable abuse -Torque test)	-	200	-
4.2 - 5.24.6.2( Reasonably foreseeable abuse -Tension test for seams in soft-filled (stuffed) toys. beanbag-type toys, and other similar filled toys)	-	200	-
4.2 - 5.24.6.3( Reasonably foreseeable abuse -Tension test for pompoms)	-	200	-
4.2 - 5.24.6.4( Reasonably foreseeable abuse -Tension test for protective components)	-	200	-
4.2 - 5.24.6.5( Reasonably foreseeable abuse -Tension test for a projectile with a suction cup)	-	200	-
4.2 - 5.24.7( Reasonably foreseeable abuse -Compression test)	-	200	-
4.2 - 5.24.8.2( Reasonably foreseeable abuse-Flexure test-Wires and other metallic components intended to be bent)	-	200	-
4.2 - 5.24.8.3( Reasonably foreseeable abuse -Flexure test-Wires likely to be bent)	-	200	-
4.3.2 - 5.21( Expanding materials)	-	2000	-
4.4.1 - 5.2(Small parts-For children under 36 months)	-	200	-
4.4.2 - 5.2(Small parts-For children 36 months and over but under 72 months )	-	200	-
4.5.1.2 - 5.3(Shape, size and strength of certain toys-Squeeze toys, rattles, and certain other toys and components of toys-Test for shape and size of certain toys)	-	200	-
4.5.1.3 - 5.3(Shape, size and strength of certain toys-Other toys or components of toys with nearly spherical, hemispherical, circular flared, or dome-shaped ends of toys having a mass less than 0,5 kg and intended for children under 18 months-Test for shape and size of certain toys)	-	200	-
4.5.1.4 - 5.3(Shape, size and strength of certain toys-Toy fasteners (e.g. nails, bolts, screws, and pegs) with nearly spherical, hemispherical, or dome-shaped ends intended for children 18 months and over but under 48 months-Test for shape and size of certain toys)	-	200	-
4.5.2 - 5.4(Shape, size and strength of certain toys-Small balls-Small balls test)	-	200	-
4.5.3 - 5.5(Shape, size and strength of certain toys-Pompoms-Test for pompoms)	-	200	-
4.5.4 - 5.6(Shape, size and strength of certain toys- Pre-school play figures-Test for pre-school play figures)	-	200	-
4.5.5(Shape, size and strength of certain toys-Toy pacifiers-Nipple length)	-	200	-
4.5.6(Shape, size and strength of certain toys-Balloons)	-	200	-
4.5.7(Shape, size and strength of certain toys-Marbles)	-	200	-
4.5.8 - a(Shape, size and strength of certain toys-Hemispheric-shaped toys-No of Opening)	-	200	-
4.5.8 - a(Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening in Base)	-	200	-
4.5.8 - b(Shape, size and strength of certain toys-Hemispheric-shaped toys-Extension of divider)	-	200	-
4.5.8 - c(Shape, size and strength of certain toys-Hemispheric-shaped toys-No of Opening)	-	200	-
4.5.8 - c(Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening )	-	200	-
4.5.8 - d(Shape, size and strength of certain toys-Hemispheric-shaped toys)	-	200	-
4.5.8 - d(Shape, size and strength of certain toys-Hemispheric-shaped toys-The maximum distance between centrelines of adjacent peaks )	-	200	-
4.5.8 - d(Shape, size and strength of certain toys-Hemispheric-shaped toys-Minimum depth)	-	200	-
4.6.1 a - 5.8(Edges-Accessible sharp edges of glass or metal-Sharp edge test)	-	200	-
4.6.1 b(Edges-Accessible sharp edges of glass or metal- gap between the edge and the adjacent surface)	-	200	-
4.6.2(Edges-Functional sharp edges)	-	200	-
4.6.3 - 5.8(Edges-Edges on metal toys-Sharp edge test)	-	200	-
4.6.4( Edges-Edges on moulded toys)	-	200	-
4.6.5( Edges-Edges on exposed bolts or threaded rod)	-	200	-
4.7.1 - 5.9(Points-Accessible sharp points-sharp-point test)	-	200	-
4.7.2 - a(Points-Functional sharp points)	-	200	-
4.7.2 - b(Points-Functional sharp points)	-	200	-
4.7.3 (Wooden toys)	-	200	-
4.8.1(Projections-General requirments)	-	200	-
4.9(a) - 5.24.8.2( Metal wires and rods-wires and other metallic components intended to be bent)	-	200	-
4.9(b) - 5.24.8.3( Metal wires and rods-wires likely to be bent)	-	200	-
4.9 - c( Metal wires and rods)	-	200	-
4.9 - c - 5.8( Metal wires and rods-Sharp edge test)	-	200	-
4.9 - c - 5.9( Metal wires and rods-Sharp Point test)	-	200	-
4.9 - c( Metal wires and rods-Minimum dia of spokes)	-	200	-
4.10(a) - 5.10(Plastic film or plastic bags in packaging and in toys-average thickness)	-	200	-
4.10(a) - 5.10(Plastic film or plastic bags in packaging and in toys- individual thickness)	-	200	-
4.11.2.1(a) - 5.11.2( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-Length of cords and electrical cables)	-	200	-
4.11.2.1(b) - 5.11.3( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-breakaway feature separation test)	-	200	-
4.11.2.1(b) - 5.11.2( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-Length of cords and electrical cables after breakaway feature separation test)	-	200	-
4.11.2.2 - 5.11.2( Cords-Cords in toys intended for children under 18 months--Other cords-free length )	-	200	-
4.11.3.3 ( Cords-Cords in toys intended for children 18 months and over but under 36 months-Other cords without a free end )	-	200	-
4.11.3.2( Cords-Cords in toys intended for children 18 months and over but under 36 months-Other cords)	-	200	-
4.11.4(a) - 5.11.4.1(Cords-Fixed loops and nooses intended for children under 36 months-Test for fixed loops and nooses-Head probe push test)	-	200	-
4.11.4(a) - 5.11.4.2(Cords-Fixed loops and nooses intended for children under 36 months-Test for fixed loops and nooses-Elastic materials)	-	200	-
4.11.4(b) - 5.11.3(Cords-Fixed loops and nooses intended for children under 36 months-Breakaway feature separation test)	-	200	-
4.11.5 - 5.11.2(Cords-Cords on pull toys-free length)	-	200	-
4.11.6(Cords- Electrical cables)	-	500	-
4.11.7 - 5.11.1(Cords- Diameter of certain cords intended for children under 36 months-cords cross-sectional dimension)	-	200	-
4.11.8 - 5.11.5(Cords- Self-retracting cords intended for children under 36 months-self-retracting cords)	-	200	-
4.11.9.1(Cords-Toys intended to be strung across a cradle, cot, perambulator or carriage)	-	200	-
4.11.9.2 (Cords-Toys otherwise intended to be attached to a cradle, cot, perambulator or carriage)	-	200	-
4.11.10(Cords-Cords on toy bags)	-	200	-
4.11.11 - 5.11.6( Cords, strings and lines for flying toys- electrical resistance)	-	200	-
4.11.11( Cords, strings and lines for flying toys- )	-	200	-
4.12.1(a - 1)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	200	-
4.12.1(a - 2)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	200	-
4.12.1(a - 3) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys-toy pushchairs and perambulators)	-	200	-
4.12.2 (a) - 5.22.3(Folding mechanisms-Other toys with folding mechanisms)	-	500	-
4.12.1(a - 4)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.12.3(Folding mechanisms-Hinge line clearance)	-	500	-
4.13.1(Holes, clearances and accessibility of mechanisms-Circular holes in rigid materials)	-	500	-
4.13.2 (Holes, clearances and accessibility of mechanisms-Accessible clearances for movable segments)	-	500	-
4.13.3(Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys)	-	500	-
4.13.3 - 5.7(Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys-accessibility of a part or component)	-	500	-
4.13.3(Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys)	-	500	-
4.13.4(Holes, clearances and accessibility of mechanisms-Other driving mechanisms)	-	500	-
4.13.5(Holes, clearances and accessibility of mechanisms-Winding keys)	-	500	-
4.14(a)(Springs)	-	500	-
4.14(b)(Springs)	-	500	-
4.14(c)(Springs)	-	500	-
4.15.1.1 - 5.12.2( Stability and overload requirements-Stability of ride-on toys and seats-Sideways stability, feet available for stabilization)	-	500	-
4.15.1.2 - 5.12.3( Stability and overload requirements-Stability of ride-on toys and seats-Sideways stability, feet unavailable for stabilization)	-	500	-
4.15.1.3 - 5.12.4( Stability and overload requirements-Stability of ride-on toys and seats-Fore and aft stability Test)	-	500	-
4.15.2 - 5.12.5( Stability and overload requirements-Overload requirements for ride-on toys and seats-overload test for ride-on toys and seats)	-	500	-
4.15.2 - 5.24.4( Stability and overload requirements-Overload requirements for ride-on toys and seats-dynamic strength test for wheeled ride-on toys other than toy scooters)	-	500	-
4.15.3 - 5.12.6( Stability and overload requirements-Stability of stationary floor toy-Stability test of stationary floor toys)	-	500	-
4.16.1(Enclosures-Ventilation)	-	500	-
4.16.2.1 - 5.13.1(Enclosures-Closures-Lids, doors and similar devices-Test For closures)	-	500	-
4.16.2.2(a)(Enclosures-Closures-Lid support for toy chests and similar toys)	-	500	-
4.16.1(Enclosures-Ventilation-No of openings)	-	500	-
4.16.1(Enclosures-Ventilation-Area of Each openings(If two openings))	-	500	-
4.16.1(Enclosures-Ventilation-Distance between openings(If two openings))	-	500	-
4.16.1(Enclosures-Ventilation-Area of Each openings(If One opening))	-	500	-
4.16.2.2(a) - 5.13.2.1(Enclosures-Closures-Lid support for toy chests and similar toys-Test For lid support)	-	500	-
4.16.2.2(a) - 5.13.2.2(Enclosures-Closures-Lid support for toy chests and similar toys- After durability test for toy chest lids)	-	500	-
4.16.2.2(a) - 5.13.2.2(Enclosures-Closures-Lid support for toy chests and similar toys-Test For lid support After durability test for toy chest lids)	-	500	-
4.16.2.2(b) - 5.13.2.2(Enclosures-Closures-Lid support for toy chests and similar toys-durability test for toy chest lids)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 1)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 2)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 3) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys-toy pushchairs and perambulators)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 4)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 5) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(b - 1)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(b - 2) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(b - 3) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.2 (a) - 5.22.3(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Other toys with folding mechanisms)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.2 (b)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Other toys with folding mechanisms)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.3(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Hinge line clearance)	-	500	-
4.16.2.2(d)(Enclosures-Closures-Lid support for toy chests and similar toys)	-	500	-
4.16.3(Enclosures-Toys that enclose the head)	-	500	-
4.16.3(Enclosures-Toys that enclose the head-No of openings)	-	500	-
4.16.3(Enclosures-Toys that enclose the head-Area of Each openings(If two openings))	-	500	-
4.16.3(Enclosures-Toys that enclose the head-Distance between openings(If two openings))	-	500	-
4.17 - 5.14(Simulated protective equipment, such as helmets, hats and goggles-Impact test for toys that cover the face)	-	500	-
4.17(Simulated protective equipment, such as helmets, hats and goggles)	-	500	-
4.18.2(a) - 5.36(Projectile toys-Projectiles-tip assessment of rigid projectiles)	-	500	-
4.18.2(b)(Projectile toys-Projectiles)	-	500	-
4.18.2(c)(Projectile toys-Projectiles)	-	500	-
4.18.2(c)(Projectile toys-Projectiles-Radius)	-	500	-
4.18.2(d) - 5.37(Projectile toys-Projectiles-length of suction cup projectiles)	-	500	-
4.18.2(d) - 5.37 - 5.24.5(Projectile toys-Projectiles-length of suction cup projectiles After torque test)	-	500	-
4.18.2(d) - 5.37 - 5.24.6.5(Projectile toys-Projectiles-length of suction cup projectiles After tension test for a projectile with a suction cup)	-	500	-
4.18.2 - e - 5.24.5(Projectile toys-Projectiles-torque test)	-	500	-
4.18.2 - e - 5.24.6.5(Projectile toys-Projectiles-tension test for a projectile with a suction cup)	-	500	-
4.18.3(a) - 5.2(Projectile toys-Projectile toys with stored energy-small parts test)	-	500	-
4.18.3(a) - 5.3 - 5.24(Projectile toys-Projectile toys with stored energy-small parts test after reasonably foreseeable abuse testing)	-	500	-
4.18.3(a) - 5.4(Projectile toys-Projectile toys with stored energy--small parts test after (wall impact test for projectiles)	-	500	-
4.18.3(b) - 5.15.1.3.3(Projectile toys-Projectile toys with stored energy-determination of kinetic energy per area of contact)	-	500	-
4.18.3(c ) - 5.24.5(Projectile toys-Projectile toys with stored energy-torque test)	-	500	-
4.18.3(c ) - 5.24.6.4(Projectile toys-Projectile toys with stored energy- tension test for protective components)	-	500	-
4.18.3(c )(Projectile toys-Projectile toys with stored energy)	-	500	-
4.18.3(d) - 5.15.2(Projectile toys-Projectile toys with stored energy-Wall impact test for projectiles)	-	500	-
4.18.3(e )(Projectile toys-Projectile toys with stored energystored energy-Discharge mechanism)	-	500	-
4.18.4.1 - 5.20(Projectile toys-Projectile toys without stored energy-Mouth-actuated projectile toys-durability of mouth-actuated toys)	-	500	-
4.18.4.2(a) - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-determination of the kinetic energy per area of contact when the contact area of the dart shall be at least 3 cm^2)	-	500	-
4.18.4.2(b)(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart)	-	500	-
4.18.4.2(c ) - 5.24.5(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After torque test)	-	500	-
4.18.4.2(c ) - 5.24.5(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-Contact area After torque test)	-	500	-
4.18.4.2(c ) - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After tension test for protective components)	-	500	-
4.18.4.3 - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)-kinetic energy per area)	-	500	-
4.18.4.6 - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-After tension test for protective components)	-	500	-
4.18.4.6 - 5.24.6.4 - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-kinetic energy per area After tension test for protective components)	-	500	-
4.19(Rotors and propellers)	-	500	-
4.2(Aquatic toys)	-	500	-
4.21(a)(Braking)	-	500	-
4.21(a)(Braking-brake performance for mechanically or electrically powered ride-on toys other than toy bicycles)	-	500	-
4.21(b)(braking)	-	500	-
4.22.1(Toy bicycles-Instructions for use)	-	500	-
4.22.2(Toy bicycles-Determination of maximum saddle height)	-	500	-
4.22.3 - 5.16.1(Toy bicycles-Braking requirements-determination of free-wheeling facility)	-	500	-
4.22.3 (Toy bicycles-Braking requirements- brake lever dimension(d))	-	500	-
4.22.3 (Toy bicycles-Braking requirements- lever Length(l))	-	500	-
4.22.3 - 5.16.3(Toy bicycles-Braking requirements- brake performance for toy bicycles)	-	500	-
4.23 - 5.17(Speed limitation of electrically driven ride-on toys-determination of speed of electrically driven ride-on toys)	-	5000	-
4.24(a) - 5.18(Toys containing a heat source-determination of temperature increases)	-	2000	-
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand-(Parts made of metals))	-	2000	-
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand(Parts made of glass or porcelain))	-	2000	-
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand(Parts made of Plastic or wood ))	-	2000	-
4.24(c) - 5.18(Toys containing a heat source- rise in temperature of other accessible parts of the toy(Parts made of metals))	-	2000	-
4.24(c) - 5.18(Toys containing a heat source- rise in temperature of other accessible parts of the toy( Parts made of other materials))	-	2000	-
4.25 - 5.19(Liquid-filled toys-leakage of liquid-filled toys)	-	500	-
4.25(Liquid-filled toys)	-	500	-
4.26(a) - 5.2( Mouth-actuated toys-small parts test)	-	500	-
4.26(b) - 5.24.5 - 5.3( Mouth-actuated toys-small parts test after torque test)	-	500	-
4.26(b) - 5.24.6.1 - 5.4( Mouth-actuated toys-small parts test after tension test, general procedure)	-	500	-
4.26(c ) - 5.20 - 5.2( Mouth-actuated toys-small parts test after durability of mouth-actuated toys)	-	500	-
4.27(Toy roller skates, toy inline skates and toy skateboards)	-	500	-
4.28( Percussion caps specifically designed for use in toys)	-	500	-
4.29(a) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	5000	-
4.29(b) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	5000	-
4.29(c) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	5000	-
4.29(d) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	5000	-
4.29(e) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	5000	-
4.29(f) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	5000	-
4.29(g) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	5000	-
4.30.2(Toy scooters-Warnings and instructions for use)	-	100	-
4.30.3 - 5.26 - 5.8(Toy scooters-Strength-After static strength for toy scooters- sharp edge test)	-	200	-
4.30.3 - 5.26 - 5.9(Toy scooters-Strength-static strength for toy scooters-sharp-point test)	-	200	-
4.30.3 - 5.26(Toy scooters-Strength-static strength for toy scooters)	-	200	-
4.30.3 - 5.27 - 5.8(Toy scooters-Strength-dynamic strength for toy scooters- sharp-edge test)	-	200	-
4.30.3 - 5.27(Toy scooters-Strength-dynamic strength for toy scooters)	-	200	-
4.30.3 - 5.29(Toy scooters-Strength-strength of toy scooter steering tubes)	-	5000	-
4.30.4 - 5.12.2(Toy scooters-Stability-sideways stability test, feet available for stabilization)	-	200	-
4.30.5(a)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	500	-
4.30.5(b)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	500	-
4.30.5(c)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	500	-
4.30.5(d)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	500	-
4.30.5(e)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	500	-
4.30.5(f) - 5.30( Toy scooters-Adjustable and folding steering tubes and handlebars-resistance to separation of handlebar)	-	500	-
4.30.6 ( Toy scooters-Braking)	-	500	-
4.30.6 - 5.28( Toy scooters-Braking- force required to hold the toy)	-	500	-
4.30.7( Toy scooters-Wheel size(diameter))	-	500	-
4.30.8(Toy scooters-Projections)	-	500	-
4.30.8(Toy scooters-Projections(rounded handlebar grips or plugs Diameter))	-	500	-
4.30.8(Toy scooters-Projections(rounded handlebar grips or plugs space from end))	-	500	-
4.31(Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over)	-	500	-
4.31.1 - 5.32(Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over-magnetic flux index)	-	500	-
4.31.1 - 5.2(Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over-small parts test)	-	500	-
4.31.2(a) - 5.32(Magnets and magnetic components-All other toys with magnets and magnetic components-magnetic flux index)	-	500	-
4.31.2(b) - 5.34 - 5.2(Magnets and magnetic components-All other toys with magnets and magnetic components-soaking test for magnets-small parts test)	-	500	-
4.31.2(c ) - 5.31 - 5.24.2 - 5.24.3 - 5.24.5 - 5.24.6.1 - 5.24.6.2 - 5.33 - 5.31 - 5.32(Magnets and magnetic components-All other toys with magnets and magnetic components-magnetic flux index After Following tests: -tension test for magnets; -drop test/tip over test for large and bulky toys; -torque test; -tension test, general procedure; -tension test for seams in soft-filled (stuffed) toys, beanbag-type toys and other similar filled toys, if applicable; -impact test for magnets; -compression test; -tension test for magnets;)	-	500	-
4.31.2(c ) - 5.31 - 5.24.2 - 5.24.3 - 5.24.5 - 5.24.6.1 - 5.24.6.2 - 5.33 - 5.31 - 5.2(Magnets and magnetic components-All other toys with magnets and magnetic components-small parts test After Following tests: -tension test for magnets; -drop test/tip over test for large and bulky toys; -torque test; -tension test, general procedure; -tension test for seams in soft-filled (stuffed) toys, beanbag-type toys and other similar filled toys, if applicable; -impact test for magnets; -compression test; -tension test for magnets;)	-	500	-
4.32 - 5.38.2( Yo-yo balls - length (lo) of the yo-yo ball tether)	-	500	-
4.32 - 5.38.1( Yo-yo balls - The ratio of the mass m (in grams) to the elastic constant k of the yo-yo ball tether(m/k))	-	500	-
4.33 - 5.11.3(Straps intended to be worn fully or partially around the neck-breakaway feature separation test)	-	500	-
4.34(Sledges and toboggans with cords for pulling)	-	500	-
4.35.3 - 5.39(Jaw entrapment in handles and steering wheels-jaw entrapment test)	-	500	-
9873 (Part - 2) 4.5 - 5.5(Soft-filled toys-Test for soft-filled toys )	-	2000	-
9873 (Part - 2) 4.5 - 5.5(Soft-filled toys-rate of spread of flame )	-	2000	For Single unit
9873 (Part - 2) 4.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	2000	For Single unit
9873 (Part - 2) 4.4 - 5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	2000	For Single unit
9873 (Part - 2) 4.4 - 5.4(Toys intended to be entered by a child-rate of spread of flame)	-	2000	For Single unit
9873 (Part - 2) 4.3(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play)	-	2000	For Single unit
9873 (Part - 9) 3(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	5000	For Single unit
9873 (Part - 9) 3(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	5000	For Single unit
9873 (Part - 9) 3(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	5000	For Single unit
9873 (Part - 9) 3(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	5000	For Single unit
9873 (Part - 3) 4.1 - Table 1(Selenium (Se) - Cl 7,8,9 )	-	3000	For Single unit
9873 (Part - 3) 4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 )	-	3000	For Single unit
9873 (Part - 3) 4.1 - Table 1(Lead (Pb) - Cl 7,8,9 )	-	3000	For Single unit
9873 (Part - 3) 4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 )	-	3000	For Single unit
9873 (Part - 3) 4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9)	-	3000	For Single unit
9873 (Part - 3) 4.1 - Table 1(Barium (Ba) - Cl 7,8,9 )	-	3000	For Single unit
9873 (Part - 3) 4.1 - Table 1(Arsenic (As) - Cl 7,8,9 )	-	3000	For Single unit
9873 (Part - 3) 4.1 - Table 1(Antimony (Sb) - Cl 7,8,9)	-	3000	For Single unit
5.24.6.1(Tension Test General procedure)	-	200	-
4.1(Normal use)	-	200	-
4.3.1(Material quality)	-	200	-
4.1(General)	-	200	-

19 Jul, 2027

-
-

IS 15298 : Part 2 (2024)

Personal Protective Equipment Part 2 Safety Footwear (ISO 20345 : 2021, MOD) (Third Revision)

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.2(Design)	-	1000	-
Cl 5.2.2, Table 4(" Height of upper ")	-	1000	-
Cl 5.2.3(Heel area)	-	1000	-
Cl 5.3.1.1(Construction of whole footwear)	-	1000	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	1000	-
Cl 5.3.2.1(Toe protection - general)	-	1000	-
Cl 5.3.2.2(Internal length)	-	1000	-
Cl 5.3.2.3(Width of toecap flange)	-	1000	-
Cl 5.3.2.4.1(Corrosion resistance of Class I footwear and hybrid mounted footwear)	-	1000	-
Cl 5.3.2.4.2(Corrosion resistance of Class II and hybrid moulded footwear)	-	1000	-
Cl 5.3.2.5(Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-	1000	-
Cl 5.3.2.6(Impact resistance)	-	1000	-
Cl 5.3.2.7(Compression resistance)	-	1000	-
Cl 5.3.3(Leak proofness)	-	1000	-
Cl 5.3.4("Specific ergonomic features ")	-	1000	-
Cl 5.3.5.2, Table 7(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	1000	-
Cl 5.3.6, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (x)(pH)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	1000	-
Cl 5.3.7(Seam strength)	-	1000	-
Cl 5.3.8(Lead Content ( National Annex A))	-	1000	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	1000	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	1000	-
Cl 5.4.2(Thickness)	-	1000	-
Cl 5.4.3(Tear strength)	-	1000	-
Cl 5.4.4, Table 11(Tensile properties- Tensile strength)	-	1000	-
Cl 5.4.4, Table 11(Tensile properties- Breaking Force)	-	1000	-
Cl 5.4.4, Table 11(Tensile properties-Modulus at 100 % elongation)	-	1000	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	1000	-
Cl 5.4.5(Flexing resistance)	-	1000	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	1000	-
Cl 5.4.7(Resistance to hydrolysis)	-	1000	-
Cl 5.5.2(Lining- Tear strength)	-	1000	-
Cl 5.5.3(Lining- Abrasion resistance)	-	1000	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	1000	-
Cl 5.6.2, Table 14(Tear strength of tongue)	-	1000	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	1000	-
Cl 5.7.2(Water permeability of insock)	-	1000	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	1000	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	1000	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	1000	-
Cl 5.8.2.1, Table 15(Thickness of Outsole)	-	1000	-
Cl 5.8.2.2(Cleated area)	-	1000	-
Cl 5.8.2.3(Cleat height)	-	1000	-
Cl 5.8.3(Outsole- Tear strength)	-	1000	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	1000	-
Cl 5.8.5(Outsole-Flexing resistance)	-	1000	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	1000	-
Cl 5.8.7(Interlayer bond strength)	-	1000	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	1000	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	1000	-
Personal protective equipment: Part 2 safety footwear(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	1000	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	1000	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	1000	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	1000	-
Cl 6.2.1.4.2.1(Corrosion resistance of perforation resistant metallic insert for Class I footwear and hybrid mounted footwear)	-	1000	-
Cl 6.2.1.4.2.2(Corrosion resistance of perforation resistant metallic insert for Class II footwear and hybrid moulded footwear)	-	1000	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	1000	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	1000	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	1000	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	1000	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	1000	-
Cl 6.2.5(Water resistance)	-	1000	-
Cl 6.2.4(Energy absorption of seat region)	-	1000	-
Cl 6.2.6.1(Metatarsal protection - Construction)	-	1000	-
Cl 6.2.6.2("Metatarsal protection-Impact resistance of metatarsal protective device ")	-	1000	-
Cl 6.2.7(Ankle protection)	-	1000	-
Cl 6.2.8.2(Cut resistance footwear- design)	-	1000	-
Cl 6.2.8.2(Dimensions and construction of protective area of Cut resistance footwear)	-	1000	-
Cl 6.2.8.3(Resistance to cutting)	-	1000	-
Cl 6.2.9(Scuff cap)	-	1000	-
Cl 6.2.10 , Table 19("Slip resistance on ceramic tile floor with glycerine ")	-	1000	-
Cl 6.3(Upper — Water penetration and absorption)	-	1000	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	1000	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	1000	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	1000	-
Cl 6.4.3.2(Design of Ladder grip)	-	1000	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	1000	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	1000	-
Cl 7, Table 20("Marking ")	-	1000	-

19 Jul, 2027

-
-

IS 15844 : Part 3 (2024)

Sports Footwear Part 3 Professional Sports Footwear

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6(Size and Fittings)	-	100	-
Cl-5(Design)	-	100	-
Cl-6(Size and Fittings)	-	100	-
Cl.7.1.1(Upper to Mid Sole/Out Sole, Upper to Composite Sole (Applicable Only When the Sole is Composite) and Out Sole to Mid Sole (Multilayer, if Present), Bond Performance)	-	1080	-
Cl.7.1.2(Energy Absorption at Seat Region)	-	700	-
Cl.7.1.1(Upper to Mid Sole/Out Sole, Upper to Composite Sole (Applicable Only When the Sole is Composite) and Out Sole to Mid Sole (Multilayer, if Present), Bond Performance)	-	1080	-
Cl.7.1.2(Energy Absorption at Seat Region)	-	700	-
Cl.7.1.3(Complete Shoe Flexing)	-	1500	-
Cl.7.1.4(Washability)	-	1000	-
Cl.7.1.5(Slip Resistance)	-	2500	-
Cl.7.1.6(Heel Drop)	-	180	-
Cl.7.2 Table-2 S.No- (i)("Flexing resistance, Min a) Dry condition b) Wet condition")	-	1500	-
Cl.7.2 Table-2 S.No- (ii)(Tear strength (average force), N, Min)	-	500	-
Cl.7.2 Table-2 S.No- (iii)("Colour fastness rubbing a-Dry b-Wet")	-	500	-
Cl.7.2 Table-2 S.No- (iv)("a) Water vapour permeability b) Water vapour coefficient")	-	700	-
Cl.7.2 Table-2 S.No- (v)(Stitch tear strength N/mm, Min)	-	500	-
Cl.7.2 Table-2 S.No- (vii)(Tensile strength)	-	250	-
Cl.7.2 Table-2 S.No- (viii)(Elongation at break, percent)	-	250	-
Cl.7.2 Table-2 S.No- (ix)("Abrasion test a) Dry b) Wet")	-	1350	-
Cl.7.2 Table-3 S.No- (i)(Breaking strength, N/mm, Min)	-	250	-
Cl.7.2 Table-3 S.No- (ii)(Elongation at break, percent, Min)	-	250	-
Cl.7.2 Table-3 S.No- (iii)(Tear strength, N, Min)	-	500	-
Cl.7.2 Table-3 S.No- (iv)(Strength at needle perforation)	-	600	-
Cl.7.2 Table-3 S.No- (v)("Flexing resistance a-Dry condition, b) Wet condition")	-	1500	-
Cl.7.2 Table-3 S.No- (vi)("a) Water vapour permeability b) Water vapour coefficient")	-	700	-
Cl.7.2 Table-3 S.No- (vii)(Hydrolysis resistance)	-	2700	-
Cl.7.2 Table-3 S.No- (ix)(Bursting strength)	-	1000	-
Cl.7.3 Table-4 S.No- (i)(Tear strength, N, Min)	-	500	-
Cl.7.3 Table-4 S.No- (ii)("Abrasion resistance, a) Dry b) Wet ")	-	500	-
Cl.7.3 Table-4 S.No- (iii)(Colour fastness to rubbing, grey scale rate with 10 rubs on dry or wet, Min)	-	300	-
Cl.7.3 Table-4 S.No- (iv)(Colour fastness to perspiration (contact method) grey scale rate, Min)	-	500	-
Cl.7.3 Table-4 S.No- (v)("a-Water vapour permeability b-Water vapour coefficient")	-	700	-
Cl.7.4 Table-5 S.No- (i)(Flexing index, Min)	-	800	-
Cl.7.4 Table-5 S.No- (ii)(Abrasion resistance)	-	1350	-
Cl.7.4 Table-5 S.No- (iii)("a) Water absorption b) Water desorption")	-	700	-
Cl.7.5 Table-6 S.No- (i)("Abrasion resistance a) Dry condition b) Wet condition")	-	1350	-
Cl.7.5 Table-6 S.No- (ii)("a) Water absorption b) Water desorption")	-	700	-
Cl.7.5 Table-6 S.No- (iii)(Heat resistance shrinkage linear, percent, Max)	-	1000	-
Cl.7.6 Table-7 S.No- (i)(Abrasion resistance)	-	1080	-
Cl.7.6 Table-7 S.No- (ii)("Flexing resistance a) Bennewart Method b) Ross flexing method")	-	1080	-
Cl.7.6 Table-7 S.No- (iii)(Hydrolysis resistance)	-	2700	-
Cl.7.6 Table-7 S.No- (iv)(Tear strength, N/mm, Min)	-	500	-
Cl.7.6 Table-7 S.No- (v)(Tensile strength)	-	250	-
Cl.7.6 Table-7 S.No- (vi)(Elongation at break percent, Min)	-	250	-
Cl.7.6 Table-7 S.No- (vii)(Compression set percent, Max)	-	1000	-
Cl.7.7 Table-8 S.No- (i)("Compression set, percent, Max a) For EVA b) For all other material")	-	1000	-
Cl.7.7 Table-8 S.No- (ii)(Split tear strength)	-	500	-
Cl.7.7 Table-8 S.No- (iii)(Heat shrinkage, percent, Ma)	-	1000	-
Cl.7.7 Table-8 S.No- (iii)(Elongation at break, percent, Min)	-	250	-
Cl.7.7 Table-8 S.No- (iv)(Elongation at break, percent, Min)	-	250	-
Cl.7.8 Table-9 S.No- (i)(First dry collapsing load, hardness, N, Min)	-	800	-
Cl.7.8 Table-9 S.No- (ii)(Resilience, percent, Min)	-	800	-
Cl.7.8 Table-9 S.No- (iii)(Moisture resistance, percent, Min)	-	800	-
Cl.7.8 Table-9 S.No- (iv)("a) Initial dry area shape retention, percent, Min b) Area shape retention after 10th collapse, dry, percent, Min ")	-	800	-
Cl.7.8 Table-9 S.No- (v)(Peel strength, N/nm, Min)	-	1080	-
Cl.7.9 Table-10 S.No- (i)("Peel strength, N/mm, Min a) Initial b) After 5 000 wear cycles")	-	1500	-
Cl.7.9 Table-10 S.No- (ii)("Shear strength, kPa, Min a) Initial b) After 5 000 wear cycles")	-	1500	-
Cl.7.10 Table-11 S.No- (i)(Limit of useful extension, percent, Min)	-	1000	-
Cl.7.10 Table-11 S.No- (ii)(Needle strength, N/mm, Min)	-	600	-
Cl.7.11 Table-12 S.No- (i)(Breaking strength of lace)	-	250	-
Cl.7.11 Table-12 S.No- (ii)(Lace tag strength)	-	250	-
Cl.7.11 Table-12 S.No- (iii)(Lace to lace abrasion)	-	800	-
Cl.7.11 Table-12 S.No- (iv)(Colour fastness to water (for lace) (Contact method))	-	500	-
Cl.7.11 Table-12 S.No- (v)(Strength of buckle/ski hook/D-ring,)	-	800	-
Cl.7.11 Table-12 S.No- (vi)("Corrosion resistance (applicable for all including decorative metal part) ")	-	900	-
Cl.7.11 Table-13 S.No- (i)(Corrosion resistance (applicable for metallic spikes))	-	900	-
Cl-7.12.1, Table no. 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	4500	-
Cl-7.12.1, Table no. 1 of IS 17011,(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	2000	-
Cl-7.12.1, Table no. 1 of IS 17011,(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	2000	-
Cl-7.12.1, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	1350	-
Cl-7.12.1, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	3700	-
Cl-7.12.1, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	2500	-
Cl-7.12.1, Table no. 1 of IS 17011,(vii)(Formaldehyde)	-	2500	-
Cl-7.12.1, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	3600	-
Cl-7.12.1, Table no. 1 of IS 17011,(ix)(PCP-TeCP-TriCP polychlorophenols)	-	3000	-
Cl-7.12.1, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	3600	-
Cl-7.12.1, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	2500	-
Cl-7.12.1, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	3700	-
Cl-7.12.1, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	1350	-
Cl-7.12.1, Table no. 1 of IS 17011,(x)(pH)	-	300	-
Cl-7.12.1, Table no. 1 of IS 17011,(xi)(Phthalates (each individual phthalate))	-	3600	-
C-7.12.1, Table no. 1 of IS 17011,(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	1500	-
Cl-7.12.2(PVC is present in sports shoe)	-	500	-
Cl- 8.1(Marking)	-	150	-

19 Jul, 2027

-
-

IS 17043 : Part 2 (2024)

Shoes: Shoes for General Purpose

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Shape and Design)	-	100	-
Cl-5.3(Material)	-	100	-
Cl-5.4, Table-1 (i)(Bond strength, N/mm, Min Upper to outsole, N/mm, Min)	-	1080	-
Cl-5.4, Table-1 (ii)(Inter layer bond strength,= N/mm, Min Midsole to outsole, N/mm, Min)	-	1080	-
Cl-5.4, Table-1 (iii)(Whole shoe flexing, flexes)	-	1080	-
Cl-5.4, Table-1 (iv)(Water proofness on complete shoe)	-	1500	-
Cl-5.4, Table-1 (v)(Slip resistance, Cof(1), Min dry and wet* (quarry tile))	-	2500	-
Cl-5.4, Table-1 (vi)(Attachment strength of strap and buckle/D-ring N)	-	800	-
Cl-5.4, Table-1 (vii)(Attachment strength of strap and velcro , N, Min)	-	1000	-
Cl-5.4, Table-1 (viii)(Strength of eyelet attachment, N, Min)	-	100	-
Cl-5.4, Table-1 (ix)(Heel pull off strength, N, Min)	-	1200	-
Cl-5.4, Table-1 (x)(Top piece attachment strength, N, Min)	-	800	-
Cl-5.4, Table-1 (xi)(Seam strength, N/mm, Min)	-	900	-
Cl-5.4, Table-1 (xii)(Whole shoe topline strength, N, Min)	-	800	-
Cl-5.4, Table-1 (xiii)(Abrasion resistance (volume loss), mm3)	-	1080	-
Cl-5.4, Table-1 (xiv)(Chemical requirements(3))	-	30000	-
Cl-5.4, Table-1 (xv)(Lead content (as Pb) ppm, Max)	-	630	-
Cl-5.4, Table-1 (xvi)(Hydrolysis resistance,(4) cut growth at 150 000 flexes, mm, Max)	-	2700	-
Cl-6.1.1, Table-2 (i)(Tear trength, N)	-	500	-
Cl-6.1.1, Table-2 (ii)(Flexing resistance, flexes)	-	1080	-
Cl-6.1.1, Table-2 (iii)(Colour fastness to rubbing (marring/staining))	-	1000	-
Cl-6.1.1, Table-2 (iv)(Colour fastness to water (contact method- multi fabrics))	-	1000	-
Cl-6.1.1, Table-2 (v)(Water vapour permeability,mg/cm2 /h, Min Water vapour coefficient,mg/cm2 , Min)	-	700	-
Cl-6.1.1, Table-2 (vi)(Stitch tear strength, N/mm, Min)	-	500	-
Cl-6.1.3, Table- 4 (vii)(Abrasion resistance)	-	1080	-
Cl-6.1.2, Table-3 (i)(Colour fastness to light, Marring, Min)	-	1000	-
Cl-6.1.2, Table-3 (ii)(Water resistance)	-	1000	-
Cl-6.1.2, Table-3 (iii)(Flexing resistance, flexes at (-) 5 °C 25 000 flexes)	-	1080	-
Cl-6.1.3, Table- 4 (i)(Breaking strength, N/mm, Min Elongation at break, percent, Min)	-	250	-
Cl-6.1.3, Table- 4 (ii)(Tear Strength, N, Min)	-	500	-
Cl-6.1.3, Table- 4 (iii)(Strength at needle perforation, N/mm, Min)	-	600	-
Cl-6.1.3, Table- 4 (iv)(Flexing resistance, Flexes)	-	1500	-
Cl-6.1.3, Table- 4 (v)(Water vapour permeability (WVP), mg/cm2 /h, Min)	-	700	-
Cl-6.1.3, Table- 4 (vi)(Hydrolysis resistance)	-	2700	-
Cl-6.1.4, Table-5 (i)(Colour fastness to light, Marring, Min)	-	1000	-
Cl-6.1.4, Table- 5 (ii)(Flexing resistance, flexes at (-) 5 ºC, s 25 000 flexes)	-	1500	-
Cl-6.2, Table-6 (i)(Tear strength, N, Min)	-	500	-
Cl-6.2, Table-6 (ii)(Abrasion resistance)	-	1080	-
Cl-6.2, Table-6 (iii)(Colour fastness rubbing (crocking))	-	1000	-
Cl-6.2, Table-6 (iv)(Colour fastness to perspiration)	-	1000	-
Cl-6.2, Table-6 (v)(Water vapour permeability, mg/cm2 /h, Min Water vapour coefficient, mg/cm2, Min)	-	700	-
Cl-6.3, Table-7 (i)(Flexing index, Min)	-	800	-
Cl-6.3, Table-7 (ii)(Abrasion resistance at 400 cycles)	-	1080	-
Cl-6.3, Table-7 (iii)(Water absorption, mg/cm2 , Min Water desorption, percent, Min)	-	700	-
Cl-6.4, Table-8 (i)(Thickness, mm, Min)	-	180	-
Cl-6.4, Table-8 (ii)(Abrasion resistance)	-	1080	-
Cl-6.4, Table-8 (iii)(Water absorption, mg/cm2 , Min Water desorption, percent, Min)	-	700	-
Cl-6.5.1, , Table-9 (i)(Flexing resistance)	-	1080	-
Cl-6.5.1, , Table-9 (ii)(Hydrolysis resistance, cut growth at 150 000 flexes, mm, Max)	-	2700	-
Cl-6.5.1, , Table-9 (iii)(Compression set, percent, Max)	-	1000	-
Cl-6.5.2.1, Table-10 (i)(Grain crack index, Min)	-	900	-
Cl-6.5.2.1, Table-10 (ii)(Density, g/cm3 , Min)	-	300	-
Cl-6.5.2.1, Table-10 (iii)(Abrasion resistance, mm/kcs, Max)	-	1080	-
Cl-6.5.2.2, Table-11 (i)(Water resistance, (dynamic method))	-	1000	-
Cl-6.5.2.3, Table-12 (i)(Hardness, Min)	-	600	-
Cl-6.5.2.3, Table-12 (ii)(Density, g/cm3 , Max)	-	300	-
Cl-6.5.2.3, Table-12 (iii)(Abrasion resistance (volume loss), mm3 , Max)	-	1080	-
Cl-6.5.2.3, Table-12 (iv)(Bond Strength between Rubber top-lift and adjacent material, N/mm, Min)	-	1080	-
Cl-6.6, Table-13 (i)(Heat shrinkage, percent, Max)	-	1000	-
Cl-6.6, Table-13 (ii)(Split tear strength, kg/25 mm, Min)	-	500	-
Cl-6.6, Table-13 (iii)(Compression set, percent, Max)	-	1000	-
Cl-6.7, Table-14 (i)(Hardness, N)	-	600	-
Cl-6.7, Table-14 (ii)(Resilience, percent)	-	800	-
Cl-6.7, Table-14 (iii)(Moisture resistance, percent)	-	800	-
Cl-6.10, Table-17 (i)(Lace breaking strength, N, Min)	-	250	-
Cl-6.10, Table-17 (ii)(Lace tag strength, N, Min)	-	250	-
Cl-6.10, Table-17 (iii)(Lace to lace abrasion resistance, cycles)	-	800	-
Cl-6.10, Table-17 (iv)(Colour fastness to water for lace contact methodstaining Gray scale rate , Min)	-	500	-
Cl-6.10, Table-17 (v)(Corrosion resistance)	-	900	-
Cl-6.11, Table-18 (i)(Fatigue resistance, cycles, Min)	-	1500	-
Cl-6.11, Table-18 (ii)(Security of puller attachment strength, N, Min)	-	800	-
Cl-6.11, Table-18 (iii)(Lateral load, N, Min)	-	800	-
Cl-6.11, Table-18 (iv)(End attachment strength, N, Min)	-	800	-
Cl-8.1(Marking)	-	150	-
Cl-6.7, Table-14 (iv)(Area shape retention, percent (a) Initial, Min b) After 10 collapsing load, Min)	-	800	-
Cl-6.7, Table-14 (v)(Adhesion strength, N/mm)	-	1080	-
Cl-6.8, Table-15 (i)(Peel strength, N/mm a) Initial, Min b) After 5 000 wear cycles, Min)	-	1500	-
Cl- 6.8, Table-15 (ii)(a) Shear strength, kPa b) Initial, Min)	-	1500	-
Cl- 6.9, Table-16 (i)(Limit of useful extension, percent, Min)	-	1000	-
Cl- 6.9, Table-16 (ii)(Needle strength, N/mm, Min)	-	600	-
Cl-6.1.1, Table-2 (vii)(Abrasion resistance)	-	1080	-

19 Jul, 2027

-
-

IS 15844 : Part 1 (2023)

SPORTS FOOTWEAR PART -1 GENERAL PURPOSEFirst Revision

63000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl No.4.1(Sampling and Conditioning)	-	180	-
Cl No.4.2(Construction)	-	100	-
Cl No.4.3(Whole Footwear)	-	100	-
4.3.1(Insole)	-	100	-
4.3.2(Toe spring height)	-	180	-
4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	1080	-
4.3.4("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	1080	-
4.3.5(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	1080	-
4.3.6(Energy Absorption at Seat Region)	-	630	-
4.3.7(Complete Shoe Flexing)	-	1500	-
4.3.8(Washability)	-	1000	-
4.3.9(Slip Resistance)	-	2500	-
Cl No.4.4 , Table No. 2 , i) , a)(Flexing resistance, Dry condition)	-	1500	-
Cl No.4.4 , Table No. 2 , i) , b)(Flexing resistance, Wet condition)	-	1500	-
Cl No.4.4 , Table No. 2 , ii)(Tear strength (average force), Min, N)	-	500	-
Cl No.4.4 , Table No. 2 , iii) , a)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Dry: (rubbing) Rating: (Marring and staining) ")	-	500	-
Cl No.4.4 , Table No. 2 , iii) , b)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Wet: (rubbing) Rating: (Marring and staining)")	-	500	-
Cl No.4.4 , Table No. 2 , iv) , a)(Water vapour permeability, mg/cm2h, Min)	-	700	-
Cl No.4.4 , Table No. 2 , iv) , b)(Water vapour coefficient, mg/cm2 , Min)	-	700	-
Cl No.4.4 , Table No. 2 , v)(Stitch tear strength (double hole), N/mm, Min)	-	500	-
Cl No.4.4 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Min Rating: (Marring)")	-	1000	-
Cl No.4.4 , Table No. 2 , i)(Breaking strength, N/mm, Min)	-	500	-
Cl No.4.4 , Table No. 2 , ii)(Elongation at break, percent Min)	-	500	-
Cl No.4.4 , Table No. 2 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	500	-
Cl No.4.4 , Table No. 2 , iv) , a)(Flexing resistance, Dry condition)	-	1500	-
Cl No.4.4 , Table No. 2 , iv) , b)(Flexing resistance, ,Wet condition)	-	1500	-
Cl No.4.4 , Table No. 2 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	700	-
Cl No.4.4 , Table No. 2 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	700	-
Cl No.4.6 , Table No. 4 , i)(Thickness, mm, Min)	-	180	-
Cl No.4.6 , Table No. 4 , ii)(Flexing index, Min)	-	500	-
Cl No.4.6 , Table No. 4 , iii)(Abrasion resistance, at 400 cycles)	-	1350	-
Cl No.4.6 , Table No. 4 , iv) , a)(Water Absorption, mg/cm2 , Min)	-	700	-
Cl No.4.6 , Table No. 4 , iv) , b)(Water Desorption, percent, Min)	-	700	-
Cl No.4.7, Table No. 5 , i)(Thickness, mm, Min)	-	180	-
Cl No.4.7, Table No. 5 , ii)(Abrasion resistance, cycles)	-	1080	-
Cl No.4.7, Table No. 5 , iii) , a)(Water Absorption, mg/cm2 , Min)	-	700	-
Cl No.4.7, Table No. 5 , iii) , b)(Water Desorption, percent, Min)	-	700	-
Cl No.4.8 , Table No. 6 , i)(Abrasion resistance (Volume loss), mm3 , Max)	-	1080	-
Cl No.4.8 , Table No. 6 , ii)("Flexing resistance Belt Method at 90 diameter Mandrel or Bennewart method, cut growth, Max")	-	1080	-
Cl No.4.8 , Table No. 6 , iii)("Hydrolysis resistance, cut growth after 150 000 flexes, in mm, Max")	-	2700	-
Cl No.4.9 , Table No. 7 , i)(Compression set, percent, Max)	-	1000	-
Cl No.4.9 , Table No. 7 , ii)(Split tear strength, kg/25 mm, Min)	-	500	-
Cl No.4.9 , Table No. 7 , iii)(Heat shrinkage, percent, Max)	-	1000	-
Cl No.4.10 , Table No. 8 , i)(First dry collapsing load, hardness, N, Min)	-	800	-
Cl No.4.10 , Table No. 8 , ii)(Resilience, percent, Min)	-	800	-
Cl No.4.10 , Table No. 8 , iii)(Moisture resistance, percent, Min)	-	800	-
Cl No.4.10 , Table No. 8 , iv) , a)(Initial dry area shape retention, percent, Min)	-	800	-
Cl No.4.11 , Table No. 9 , i)(Peel strength, N/mm, Min)	-	1500	-
Cl No.4.11 , Table No. 9 , ii)(Shear strength, kPa , Min)	-	1500	-
Cl No.4.12 , Table No. 10 , i)(Limit of useful extension, percent, Min)	-	1000	-
Cl No.4.13 , Table No. 11 , i)(Breaking strength of lace, N, Min)	-	800	-
Cl No.4.13 , Table No. 11 , ii)(Lace tag strength, N, Min)	-	800	-
Cl No.4.13 , Table No. 11 , iii)(Lace to lace abrasion,)	-	1000	-
Cl No.4.13 , Table No. 11 , iv)("Colour fastness to water Gray Scale Rate, Min Rating")	-	500	-
Cl No.4.13 , Table No. 11 , v)(Strength of Buckle/Ski hook, N, Min)	-	800	-
Cl No.4.13 , Table No. 11 , vi)(Corrosion resistance)	-	900	-
Cl No . 4.14("Chemical Requirement on Complete Product for all Types of Sports Shoe")	-	35000	with chemical test 63000; without 28000 per sample 10% discount to BIS
Cl No . 5(MARKING AND PACKING)	-	180	-
Cl No . 4.14, Table no. 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	4500	-
Cl No . 4.14, Table no. 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3700	-
Cl No . 4.14, Table no. 1 of IS 17011(iv)(Chromium (VI))	-	2100	-
Cl No . 4.14, Table no. 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	5000	-
Cl No . 4.14, Table no. 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	2500	-
Cl No . 4.14, Table no. 1 of IS 17011(vii)(Formaldehyde)	-	2500	-
Cl No . 4.14, Table no. 1 of IS 17011(viii)(Organotin compounds)	-	7000	-
Cl No . 4.14, Table no. 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	4500	-
Cl No . 4.14, Table no. 1 of IS 17011(x)(pH)	-	500	-
Cl No . 4.14, Table no. 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	6000	-
Cl No . 4.14, Table no. 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	3500	-
Cl-5, Table -1 S. No-(i) (Amendment No-1)(Insole)	-	100	-
Cl-5, Table -1 S. No- (ii) (Amendment No-1)(Toe spring height)	-	180	-
Cl-5, Table -1 S. No- (iii) (Amendment No-1)("Bond performance (a) Upper to sole/mid sole/composite sole (b) Interlayer bond strength")	-	2160	-
Cl-5, Table -1 S. No- (iv) (Amendment No-1)(Energy absorption at seat region)	-	630	-
Cl-5, Table -1 S. No- (v) (Amendment No-1)(Complete shoe flexing)	-	1500	-
Cl-5, Table -1 S. No-(vi) (Amendment No-1)(Washability)	-	1000	-
Cl-5, Table -1 S. No- (vii) (Amendment No-1)(Slip resistance, coefficient of friction (COF),)	-	2500	-
Cl-5, Table -1 S. No- (viii) (Amendment No-1)("Abrasion resistance a-Cellular sole b-Solid sole")	-	1500	-
Cl-5, Table -1 S. No- (x) (Amendment No-1)(Chemical requirements)	-	35000	-
Cl-5, Table -1 S. No- (xi) (Amendment No-1)(Hydrolysis resistance)	-	2700	-
Cl-5, Table -1 S. No- (xii) (Amendment No-1)(Lead content)	-	650	-
Cl-6, Table -2 S. No- (i) (Amendment No-1)(Tear strength)	-	500	-
Cl-6, Table -2 S. No- (ii) (Amendment No-1)("Colour fastness rubbing a-Dry: (rubbing) b-Wet: (rubbing)")	-	500	-
Cl-6, Table -4 S. No- (iii),(Amendment No-1)(Colour fastness to rubbing , grey scale rate with 10 rubs on dry or wet, Min)	-	500	-
Cl-6, Table -2 S. No- (iii), b) (Amendment No-1)(Water vapour coefficient)	-	630	-
Cl-6, Table -2 S. No- (iv),(Amendment No-1)(Stitch tear strength)	-	500	-
Cl-6, Table -2 S. No- (v),(Amendment No-1)(Colour fastness to light grey scale rate,)	-	1000	-
Cl-6, Table -3 S. No- (i),(Amendment No-1)(Breaking strength, N/mm, Min)	-	500	-
Cl-6, Table -3 S. No- (ii),(Amendment No-1)("Elongation at break a-Tighter direction b-Stretch direction")	-	500	-
Cl-6, Table -5 S. No-(iii), (Amendment No-1)(Abrasion resistance,)	-	1350	-
Cl-6, Table -5 S. No- (iv), a (Amendment No-1)(Water absorption)	-	630	-
Cl-6, Table -6 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	100	-
Cl-6, Table -6 S. No- (ii), (Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	1080	-
Cl-6, Table -6 S. No- (iii),a (Amendment No-1)(Water absorption)	-	350	-
Cl-6, Table -6 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	350	-
Cl-6, Table -7 S. No- (i), (Amendment No-1)(Flexing resistance (Belt method or Bennewart method))	-	1080	-
Cl-6, Table -7 S. No- (ii), (Amendment No-1)(Hydrolysis resistance, cut growth after flexes)	-	2700	-
Cl-6, Table -8 S. No- (i), (Amendment No-1)("Compression set, percent, Max a) For EVA b) For all other materials")	-	1000	-
Cl-6, Table -8 S. No- (ii), (Amendment No-1)(Split tear strength)	-	500	-
Cl-6, Table -8 S. No- (iii), (Amendment No-1)(Heat shrinkage)	-	1000	-
Cl-6, Table -9 S. No- (i), (Amendment No-1)(First dry collapsing load, hardness)	-	800	-
Cl-6, Table -9 S. No- (ii), (Amendment No-1)(Resilience, percent)	-	800	-
Cl-6, Table -9 S. No- (iii), (Amendment No-1)(Moisture resistance)	-	800	-
Cl-6, Table -9 S. No- (iv), a (Amendment No-1)(Initial dry area shape retention)	-	800	-
Cl-6, Table -10 S. No- (i), (Amendment No-1)("Peel strength a) Initial b) After 5 000 wear cycles")	-	1500	-
Cl-6, Table -10 S. No- (ii), (Amendment No-1)("Shear strength a) Initial b) After 5 000 wear cycles")	-	1500	-
Cl-6, Table -11 S. No- (i), (Amendment No-1)(Limit of useful extension)	-	1000	-
Cl-6, Table -12 S. No- (i), (Amendment No-1)(Breaking strength of lace)	-	500	-
Cl-6, Table -12 S. No- (ii), (Amendment No-1)(Lace tag strength)	-	500	-
Cl-6, Table -12 S. No- (iii), (Amendment No-1)(Lace to lace abrasion)	-	800	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	500	-
Cl-6, Table -12 S. No (v), (Amendment No-1)(Strength of buckle/ski hook)	-	800	-
Cl-6, Table -12 S. No- (vi), (Amendment No-1)(Corrosion resistance)	-	900	-

19 Jul, 2027

-
-

IS 302 : Part 2 : Sec 12 (1993)

Safety of household and similar electrical appliances - Specification: Part 2 particular requirements: Sec 12 warming plates and similar appliances

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Rating)	-	500	-
6(Classification)	-	500	-
7(Marking)	-	1000	-
8(Protection against Access to Live Parts)	-	2000	-
9(Starting Of Motor Operated Appliances)	-	0	-
10("Power Input & Current")	-	2000	-
11(Temperature Rise/ Heating)	-	5000	-
12(Operation Under Overload Conditions of Appliances with heating Element)	-	0	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	5000	-
14("Radio and Television Interference Suppression / Transient Over Voltage ")	-	10000	-
15(Moisture Resistance)	-	5000	-
16(Insulation Resistance and Electric Strength/ Leakage Current and Electric Strength)	-	5000	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	5000	-
18(Endurance)	-	1000	-
19(Abnormal Operation)	-	5000	-
20(Stability & Mechanical Hazards)	-	2000	-
21(Mechanical strength)	-	2000	-
22(Construction)	-	2000	-
23(Internal Wiring)	-	2000	-
24(Components)	-	2000	-
25(Supply Connection & External Flexible Cords)	-	2000	-
26(Terminals For External Conductors)	-	2000	-
27(Provision For Earthing)	-	2000	-
28(Screws & Connections)	-	2000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	2000	-
30(Resistance to Heat & Fire)	-	5000	-
31(Resistance to Rusting)	-	2000	-
32(Radiation hazards)	-	2000	-

19 Jul, 2027

-
Included w.e.f 26.06.2025 Exclusion: Cl 19.11.4.1-19.11.4.7(EMI/EMC)

IS 302 : Part 2 : Sec 26 (2014)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 26 clocks (First Revision)

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	1000	-
7(Marking and instructions)	-	1000	-
8(Protection against live parts)	-	2000	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	0	-
10(POWER INPUT AND CURRENT)	-	2000	-
11(HEATING)	-	5000	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	5000	-
14(TRANSIENT OVERVOLTAGES)	-	10000	-
15(MOISTURE RESISTANCE)	-	5000	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	5000	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	5000	-
18(ENDURANCE)	-	0	-
19(ABNORMAL OPERATION)	-	5000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	2000	-
21(MECHANICAL STRENGTH)	-	2000	-
22(CONSTRUCTION)	-	2000	-
23(INTERNAL WIRING)	-	2000	-
24(COMPONENTS)	-	2000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	2000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	2000	-
27(PROVISION FOR EARTHING)	-	2000	-
28(SCREWS AND CONNECTIONS)	-	2000	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	2000	-
30(RESISTANCE TO HEAT AND FIRE)	-	5000	-
31(RESISTANCE TO RUSTING)	-	2000	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	2000	-
22.16(Automatic cord reel)	-	1000	-
22.32(Oxygen bomb for rubber material)	-	1000	-
22.47(Water pressure inlet)	-	1000	-
22.3(Flexing test)	-	1000	-
24(Components)	-	2000	-
5(General conditions for the tests)	-	500	-
4(General Requirements)	-	500	-
22.46(Software)	-	2000	-

19 Jul, 2027

-
Included w.e.f 26.06.2025 Exclusion: Cl 19.11.4.1-19.11.4.7(EMI/EMC)

IS 302 : Part 2 : Sec 202 (1992)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 202 electric stoves

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	500	-
6(Classification- IS 302-1)	-	5000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.3(Marking- IS 302-1)	-	1000	-
7.4(Marking- IS 302-1)	-	1000	-
7.6(Marking- IS 302-1)	-	1000	-
7.11(Marking- IS 302-1)	-	1000	-
7.12(Marking- IS 302-1)	-	1000	-
7.13(Marking- IS 302-1)	-	1000	-
7.14(Marking- IS 302-1)	-	1000	-
7.15(Marking- IS 302-1)	-	1000	-
7.101(Marking)	-	1000	-
8( Protection Against Electric Shock, IS 302-1)	-	2000	-
10(Power Input and Current, IS 302-1)	-	2000	-
11(Heating, IS 302-1)	-	5000	-
11(Heating, IS 302-1)	-	5000	-
11(Heating, IS 302-1)	-	5000	-
11(Heating, IS 302-1)	-	5000	-
11(Heating, IS 302-1)	-	5000	-
11(Heating, IS 302-1)	-	5000	-
11(Heating, IS 302-1)	-	5000	-
12(Operation under overload conditions of appliances with heating elements, IS 302-2-202: 1992)	-	0	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	5000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	5000	-
15.1(Moisture Resistance, IS 302-1)	-	5000	-
15.3(Moisture Resistance, IS 302-1)	-	5000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	5000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	5000	-
19.2(Abnormal Operation, IS 302-1)	-	5000	-
19.2(Abnormal Operation, IS 302-1)	-	5000	-
19.3(Abnormal Operation, IS 302-1)	-	5000	-
19.3(Abnormal Operation, IS 302-1)	-	5000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	2000	-
21.1(Mechanical Strength, IS 302-1 & IS 302-2-202)	-	2000	-
22(Construction, IS 302-1)	-	2000	-
22.101(Construction)	-	2000	-
22.102(Construction)	-	2000	-
22.103(Construction)	-	2000	-
22.104(Construction)	-	2000	-
22.105(Construction)	-	2000	-
22.105.1(Construction)	-	2000	-
22.105.2(Construction)	-	2000	-
22.106(Construction)	-	2000	-
22.107(Construction)	-	2000	-
11.107.1(Construction)	-	0	-
23.1(Internal Wiring, IS 302-1)	-	2000	-
23.2(Internal Wiring, IS 302-1)	-	2000	-
23.8(Internal Wiring, IS 302-1)	-	2000	-
23.9(Internal Wiring, IS 302-1)	-	2000	-
23.10(Internal Wiring, IS 302-1)	-	2000	-
24.1(Components, IS 302-1)	-	2000	-
24.2(Components, IS 302-1)	-	2000	-
24.101(Components)	-	2000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.4(Supply Connection and External Flexible Cords)	-	2000	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
26(Terminals for External Conductors, IS 302-1)	-	2000	-
27.1(Provision for Earthing, IS 302-1)	-	2000	-
27.2(Provision for Earthing, IS 302-1)	-	2000	-
27.3(Provision for Earthing, IS 302-1)	-	2000	-
27.4(Provision for Earthing, IS 302-1)	-	2000	-
27.5(Provision for Earthing, IS 302-1)	-	2000	-
28(Screws & Connections, IS 302-1)	-	2000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	2000	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	2000	-
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	5000	-
30.2(Resistance to Heat, Fire & Tracking, IS 302-1)	-	5000	-
31(Resistance of Rusting, IS 302-1)	-	1000	-

19 Jul, 2027

-
Included w.e.f.24.06.2025 Exclusion (EMI/EMC) Cl 19.11.4.1 to Cl 19.11.4.7

IS 302 : Part 2 : Sec 30 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 30 room heaters (First Revision)

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 (Classification)	-	500	-
Cl.6 (Classification)	-	500	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7(Marking and Instructions)	-	1000	-
Cl.7(Marking and Instructions)	-	1000	-
Cl.7(Marking and Instructions)	-	1000	-
Cl.7.3(Marking and Instructions)	-	1000	-
Cl.7.3(Marking and Instructions)	-	1000	-
Cl.7.3(Marking and Instructions)	-	1000	-
Cl.7.4(Marking and Instructions)	-	1000	-
Cl.7.5(Marking and Instructions)	-	1000	-
Cl.7.6 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.8 of IS :302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.9 of IS :302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.10 of IS :302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.11 of IS :302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12.1 & IS:302-1:2009(Marking and Instructions)	-	1000	-
Cl.7.13 of IS 302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.14 of IS302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.14(Marking and Instructions)	-	1000	-
Cl.7.14(Marking and Instructions)	-	1000	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.101(Marking and Instructions)	-	1000	-
Cl.8 & IS:302-1:2008(Protection Against Access to Live Parts)	-	2000	-
Cl.10 & IS:302-1:2008(Power Input and Current)	-	2000	-
Cl.11 & IS:302-1:2008(Heating)	-	5000	-
Cl.11 & IS:302-1:2008(Heating)	-	5000	-
Cl.11 & IS:302-1:2008(Heating)	-	5000	-
Cl.11 & IS:302-1:2008(Heating)	-	5000	-
Cl.11 & IS:302-1:2008(Heating)	-	5000	-
Cl.11 & IS:302-1:2008(Heating)	-	5000	-
Cl.11 & IS:302-1:2008(Heating)	-	5000	-
Cl.11 & IS:302-1:2008(Heating)	-	5000	-
Cl.11 & IS:302-1:2008(Heating)	-	5000	-
Cl.11 & IS:302-1:2008(Heating)	-	5000	-
Cl.11 & IS:302-1:2008(Heating)	-	5000	-
Cl.11 & IS:302-1:2008(Heating)	-	5000	-
Cl.11 & IS:302-1:2008(Heating)	-	5000	-
Cl.11 & IS:302-1:2008(Heating)	-	5000	-
Cl.11 & IS:302-1:2008(Heating)	-	5000	-
Cl.11 & IS:302-1:2008(Heating)	-	5000	-
Cl.11.8(Heating)	-	5000	-
Cl.11.8(Heating)	-	5000	-
Cl.11.8(Heating)	-	5000	-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	5000	-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	5000	-
Cl.14 & IS:302-1:2008(Transient Over Voltages)	-	10000	-
Cl.15 & IS: 302-1:2008(Moisture Resistance )	-	5000	-
Cl.15.3 of IS 302-1:200(Moisture Resistance )	-	5000	-
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	5000	-
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	5000	-
Cl.17 & IS:302-1:2008(Over load Protection of Transformers and Associated Circuits )	-	5000	-
Cl.18 (Endurance. )	-	0	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	2000	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	2000	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	2000	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	2000	-
Cl.19.101(Abnormal Operation.)	-	2000	-
Cl.19.102(Abnormal Operation.)	-	2000	-
Cl.19.103(Abnormal Operation.)	-	2000	-
Cl.19.104(Abnormal Operation.)	-	2000	-
Cl.19.105(Abnormal Operation.)	-	2000	-
Cl.19.106(Abnormal Operation.)	-	2000	-
Table 8 of IS 302-1:2008(Abnormal Operation.)	-	2000	-
Cl.19.107(Abnormal Operation.)	-	2000	-
Cl.19.108(Abnormal Operation.)	-	2000	-
Cl.19.109(Abnormal Operation.)	-	2000	-
Cl.19.110(Abnormal Operation.)	-	2000	-
Cl.19.111(Abnormal Operation.)	-	2000	-
Cl.19.112(Abnormal Operation.)	-	2000	-
Cl.19.113(Abnormal Operation.)	-	2000	-
Cl.19.114(Abnormal Operation.)	-	2000	-
Cl.20 & IS:302-1:2008(Stability & Mechanical Hazards)	-	2000	-
Cl.21 & IS:302-1:2008)(Mechanical Strength.)	-	2000	-
Cl.21.2 of IS 302-1:2008(Mechanical Strength.)	-	2000	-
Cl.21.101 (Mechanical Strength.)	-	2000	-
Cl.21.102(Mechanical Strength.)	-	2000	-
Cl.21.103(Mechanical Strength.)	-	2000	-
Cl.22.1 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.5 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.6 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.7 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.8 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.9 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.11(Construction)	-	2000	-
Cl.22.12 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.13 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.14 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.15 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.18 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.20 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.21 of IS 302-1:2008(Construction)	-	2000	-
Cl.23 & IS:302-1:2008(Internal Wiring )	-	2000	-
Cl.23.4 & Cl.29 of 302-1:2008(Internal Wiring )	-	2000	-
Cl.23.5 of 302-1:2008(Internal Wiring )	-	2000	-
Cl.23.7 of 302-1:2008(Internal Wiring )	-	2000	-
C.23.7 of 302-1:2008(Internal Wiring )	-	2000	-
Cl.24.1 of 302-1:2008(Component)	-	2000	-
Cl.24.1 of 302-1:2008(Component)	-	2000	-
Cl.24.1.3 (Component)	-	2000	-
Cl.24.1.3 (Component)	-	2000	-
Cl.24.1.3 (Component)	-	2000	-
Cl.24.1.3 (Component)	-	2000	-
C.24.1.4(Component)	-	2000	-
C.24.2 of 302-1:2008(Component)	-	2000	-
Cl.24.10(Component)	-	2000	-
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords )	-	2000	-
Cl. 25.2 of IS 3021:2008(Supply Connection and External Flexible Cords )	-	2000	-
Cl. 25.3 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	2000	-
Cl. 25.4 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	2000	-
Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords )	-	2000	-
Cl.25.6 of 302-1:2008(Supply Connection and External Flexible Cords )	-	2000	-
Cl.25.7.(Supply Connection and External Flexible Cords )	-	2000	-
Cl.25.8(Supply Connection and External Flexible Cords )	-	2000	-
Cl. 25.9(Supply Connection and External Flexible Cords )	-	2000	-
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords )	-	2000	-
Cl. 25.11(Supply Connection and External Flexible Cords )	-	2000	-
Cl. 25.12(Supply Connection and External Flexible Cords )	-	2000	-
Cl. 25.13(Supply Connection and External Flexible Cords )	-	2000	-
Cl.25.14 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	2000	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	2000	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	2000	-
Cl.25.17 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	2000	-
Cl.25.18(Supply Connection and External Flexible Cords )	-	2000	-
Cl.25.20(Supply Connection and External Flexible Cords )	-	2000	-
Cl.26.1 of IS 302-1:2008(Terminal for External Conductors )	-	2000	-
Cl.26.10 of IS 302-1:2008(Terminal for External Conductors )	-	2000	-
Cl.26.11 of IS 302-1:2008(Terminal for External Conductors )	-	2000	-
Cl.27.1 of 302-1:2008(Provision for Earthing.)	-	2000	-
Cl.27.5 of 302-1:2008(Provision for Earthing.)	-	2000	-
Cl.28 of 302-1:2008(Screws and Connections.)	-	2000	-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	2000	-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	2000	-
Cl.30 & IS:302-1:2008(Resistance to Heat and Fire)	-	5000	-
Cl.30.2.2 of 302-1:2008(Resistance to Heat and Fire)	-	5000	-
Cl.31 & IS:302-1:2008(Resistance to Rusting.)	-	2000	-
Cl.32 & IS:302-1:2008(Radition,Toxicity and similar Hazards.)	-	2000	-
Cl.31 of IS:302-1:2008(Resistance to Rusting.)	-	2000	-
Cl.30.2 of 302-1:2008(Resistance to Heat and Fire : Resistance to fire)	-	5000	-
Cl.30.1 of IS:302-1:2008(Resistance to Heat and Fire: Resistance to heat. )	-	5000	-
Cl.29.2 of IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage Distance)	-	2000	-
Cl.29.1 of IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance )	-	2000	-
Cl.28 of 302-1:2008(Screws and Connections.)	-	2000	-
Cl.27.5 of 302-1:2008(Provision for Earthing : ECR)	-	2000	-
Cl.27.1 of 302-1:2008(Provision for Earthing )	-	2000	-
Cl.26 of IS 302-1:2008(Terminal for External Conductors )	-	2000	-
Cl.25.20 of 302-1:2008(Supply Connection and External Flexible Cords : Additional insulation )	-	2000	-
Cl.25.18 of 302-1:2008(Supply Connection and External Flexible Cords : Arrangement of cord anchorages )	-	2000	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords : Cord grip test - displacement)	-	2000	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords : Cord grip test - strain at terminals )	-	2000	-
Cl. 25.13 of 302-1:2008(Supply Connection and External Flexible Cords : Inlet opening of supply cords )	-	2000	-
Cl. 25.12 of 302-1:2008(Supply Connection and External Flexible Cords : Moulding of cords )	-	2000	-
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords : Colour of earthing wire )	-	2000	-
Cl. 25.9 of 302-1:2008(Supply Connection and External Flexible Cords : Contact with sharp edge )	-	2000	-
Cl.25.8 of 302-1:2008(Supply Connection and External Flexible Cords : Resistance of supply wires )	-	2000	-
Cl.25.7 of IS:302-2-30:2007(Supply Connection and External Flexible Cords : Supply cords material )	-	2000	-
Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords : Type of attachments )	-	2000	-
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords : Means of connection )	-	2000	-
Cl.24 of IS:302-2-30:2007(Component)	-	2000	-
Cl.23.7 of 302-1:2008(Internal Wiring : Colour of earting conductor )	-	2000	-
Cl.23 of IS:302-1:2008(Internal Wiring )	-	2000	-
Cl.22.106 of IS:302-2-30:2007(Construction : Checking of thermostats, timers or similar means for visibl glowing radiant heaters)	-	2000	-
Cl.22.106 of IS:302-2-30:2007(Construction : Checking of openings on the underside)	-	2000	-
Cl.22.102 & Cl 22.103 of IS:302-2-30:2007(Construction : Fireguard )	-	2000	-
Cl.22.101 of IS:302-2-30:2007(Construction : Prevention to contact with heating element)	-	2000	-
Cl.22.24 of IS:302-2-30:2007(Construction : test of bare heating element)	-	2000	-
Cl.22.18 of IS 302-1:2008(Construction : Resistance to corrosion )	-	2000	-
Cl.22.15 of IS 302-1:2008(Construction : Storage hooks for flexible cords)	-	2000	-
Cl.22.14 of IS 302-1:2008(Construction : ragged and sharp edges)	-	2000	-
Cl.22.13 of IS 302-1:2008(Construction : Position of handles )	-	2000	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knobs,grips,lever and similer parts )	-	2000	-
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable parts )	-	2000	-
Cl.22.7 of IS:302-2-30:2007(Construction : Pressure test of oil heater )	-	2000	-
Cl.21.101 of IS:302-2-30:2007(Mechanical Strength : fire gaurd deformation test )	-	2000	-
Cl.21.2 of IS 302-1:2008(Mechanical Strength : Pentration by sharp implementation )	-	2000	-
Cl.21.1 of IS:302-1:2008)(Mechanical Strength : Rough handling )	-	2000	-
Cl.20 of IS:302-2-30:2007(Stability of Mechanical Hazards)	-	2000	-
Cl.19.114 of IS:302-2-30:2007(Abnormal Operation : the temp. of the surface of the container for oil heaters )	-	2000	-
Cl.19.112 of IS:302-2-30:2007(Abnormal Operation : Ignition of bleached cotton gauge)	-	2000	-
Cl.19.111 of IS:302-2-30:2007(Abnormal Operation : Ignition of flannelette for Visibly glowing heaters)	-	2000	-
Cl.19.110 of IS:302-2-30:2007(Abnormal Operation : operation against wall for visibly glowing radiant heaters )	-	2000	-
Cl.19.109 of IS:302-2-30:2007(Abnormal Operation : operation against wall for fan heater )	-	2000	-
Cl.19.106 of IS:302-2-30:2007(Abnormal Operation : Locked rotor of fan hetear )	-	2000	-
Cl.19.103 , Cl 19.104 of IS:302-2-30:2007(Abnormal Operation : Operation after Covering by cotton)	-	2000	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : High Voltage )	-	2000	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : temp rise of supply cord )	-	2000	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : Temp rise of test corner )	-	2000	-
Cl.19 of IS:302-1:2008(Abnormal Operation : Emission of molten or poisonous or ignitable gas)	-	2000	-
Cl.16 of IS:302-1:2008(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	2000	-
Cl.16 of IS:302-1:2008(Leakage current and Electric strength (After humidity): Leakage current )	-	2000	-
Cl.15 of IS 302-1:2008(Moisture Resistance )	-	2000	-
Cl.14 of IS:302-1:2008(Transient Over Voltages)	-	2000	-
Cl.13 of IS:302-1:2008(Leakage Current of Electric Strength at operating temp. )	-	2000	-
Cl.13 of IS:302-1:2008(Leakage Current of Electric Strength at operating temp. )	-	2000	-
Cl.11 of IS:302-2:30: 2007(Heating : Room temperature)	-	2000	-
Cl.11.8 of IS:302-2:30: 2007(Heating : For liquid filled radiators the temp. rise of the outer surface of the liquid container)	-	2000	-
Cl.11 of IS:302-2:30: 2007(Heating : Temperature rise in winding)	-	2000	-
Cl.11 of IS:302-2:30: 2007(Heating : Air-outlet grills)	-	2000	-
Cl.11 of IS:302-2:30: 2007(Heating : Surfaces of handles, knobs, grips and similar parts)	-	2000	-
Cl.11 of IS:302-2:30: 2007(Heating : Wooden supports, walls, ceiling and floor of the test corner)	-	2000	-
Cl.11 of IS:302-2:30: 2007(Heating : PVC Insulation )	-	2000	-
Cl.10 of IS:302-1:2008(Power Input and Current)	-	2000	-
Cl.8 of IS:302-1:2008(Protection Against Access to Live Parts)	-	2000	-
Cl.7.101 of IS:302-2:30: 2007(Marking and Instructions : standard mark. )	-	2000	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions : Visibility of marking concerning covering)	-	2000	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions : discernibility from the out side )	-	2000	-
Cl.7.14 of IS:302-2:30: 2007(Marking and Instructions : Height of “Do not cover”)	-	2000	-
Cl.7.14 of IS:302-2:30: 2007(Marking and Instructions : height of symbol)	-	2000	-
Cl.7.14 of IS302-1:2008(Marking and Instructions : Legibility and durability )	-	2000	-
Cl.7.13 of IS 302-1:2008(Marking and Instructions : Languge of instruction and texts )	-	2000	-
Cl.7.11 of IS :302-1:2008(Marking and Instructions : Controls )	-	2000	-
Cl.7.9 of IS :302-1:2008(Marking and Instructions : switches )	-	2000	-
Cl.7.8 of IS :302-1:2008(Marking and Instructions : terminals )	-	2000	-
Cl.7.6 of IS:302-1:2008(Marking and Instructions : Symbols )	-	2000	-
Cl.7.5 of IS:302-1:2008(Marking and Instructions : upper of lower limit of the rated power input )	-	2000	-
Cl 7.1 & Cl.7.6 of IS:302-2:30: 2007(Marking and Instructions : Do not cover )	-	2000	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Country of manufacture )	-	2000	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Symbol for Class-II )	-	2000	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Model or type )	-	2000	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Name , trade-mark or identification mark of the manufacturer )	-	2000	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : rated power input )	-	2000	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Nature of supply )	-	2000	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Rated Voltage )	-	2000	-

19 Jul, 2027

-
Included w.e.f 26.06.2025 Exclusion: Cl 19.11.4.1-19.11.4.7(EMI/EMC)

IS 302 : Part 2 : Sec 9 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 9 toasters, grills, roasters and similar appliances (First Revision)

Toasters, Grills, Roasters and Similar Appliances

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.32(Verification)	-	0	-
Cl.31(Verification)	-	0	-
Cl.30(Verification)	-	0	-
CL.29(Verification)	-	0	-
Cl.28(Verification)	-	0	-
Cl.27(Verification)	-	0	-
Cl.26(Verification)	-	0	-
Cl.25(Verification)	-	0	-
Cl.24(Verification)	-	0	-
Cl.23(Verification)	-	0	-
Cl.22(Verification)	-	0	-
Cl.21(Verification)	-	0	-
Cl.20(Verification)	-	0	-
Cl.19(Verification)	-	0	-
Cl. 16(Verification)	-	0	-
Cl.15(Verification)	-	0	-
Cl.14(Verification)	-	0	-
Cl.13(Verification)	-	0	-
Cl.11(Verification)	-	0	-
Cl.10(Verification)	-	0	-
Cl.8(Verification)	-	0	-
Cl. 7(Verification)	-	0	-
Cl. 6(Verification)	-	0	-
Cl. 32 IS 302-2-9(Radiation, Toxicity and similar hazards)	-	3000	-
Cl. 31 IS 302-2-9(Resistance To Rusting )	-	3000	-
Cl. 30 IS 302-2-9(Resistance To Heat, Fire And Tracking)	-	3000	-
Cl. 29 IS 302-2-9(Creepage Distances, Clearances And Distances Through Insulation)	-	3000	-
Cl. 28 IS 302-2-9(Screws and Connections)	-	2000	-
Cl. 27 IS 302-2-9(Provision For Earthing )	-	2000	-
Cl. 26 IS 302-2-9(Terminal For External Conductors )	-	2000	-
Cl. 25 IS 302-2-9(Supply Connections and External Flexible Cables and Cords )	-	2000	-
Cl. 24 IS 302-2-9(Components)	-	2000	-
Cl. 23 IS 302-2-9(Internal Wiring)	-	3000	-
Cl. 22 IS 302-2-9(Construction )	-	5000	-
Cl. 21 IS 302-2-9(Mechanical Strength)	-	3000	-
Cl. 20 IS 302-2-9(Stability and mechanical Hazards)	-	2000	-
Cl. 19 IS 302-2-9(Abnormal Operation )	-	3000	-
Cl. 18 IS 302-2-9(Endurance)	-	0	-
Cl. 17 IS 302-2-9(Overload protection of transformers and associated circuits.)	-	2000	-
Cl. 16 IS 302-2-9(Leakage Current and Electric strength )	-	2000	-
Cl. 15 IS 302-2-9(Moisture Resistance)	-	3000	-
Cl. 14 IS 302-2-9(Transient overvoltage)	-	3000	-
Cl. 13 IS 302-2-9(Leakage Current & Electric Strength at Operating Temperature)	-	3000	-
Cl. 11 IS 302-2-9(Heating)	-	4000	-
Cl. 10 IS 302-2-9(Power Input and Current )	-	3000	-
Cl. 9 IS 302-2-9(Starting of motor operated appliances)	-	0	-
Cl. 8 IS 302-2-9(Protection against access to live parts)	-	4000	-
Cl. 7 IS 302-2-9(Marking and Instruction)	-	2000	-
Cl. 6 IS 302-2-9(Classification)	-	2000	-
32(Radiation, toxicity and similar hazards)	-	3000	-
31(Resistance to rusting)	-	3000	-
31(Resistance to rusting)	-	3000	-
30.2.4(Resistance to heat and fire)	-	1000	-
30.2(Resistance to heat and fire)	-	1500	-
30.1(Resistance to heat and fire)	-	1500	-
29.3(Clearances, creepage distances and solid insulation)	-	1000	-
29.2(Clearances, creepage distances and solid insulation)	-	1000	-
29.2(Clearances, creepage distances and solid insulation)	-	1000	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	1000	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	1000	-
28.2 to 28.4(Screws and connections)	-	1500	-
28.1, Table No.-14(Screws and connections)	-	1500	-
27.6(Provision for earthing)	-	1000	-
27.5(Provision for earthing)	-	1000	-
27.1 to 27.4(Provision for earthing)	-	1000	-
26.10 & 26.11(Terminals for external conductors)	-	1000	-
26.9(Terminals for external conductors)	-	1000	-
26.1 to 26.8(Terminals for external conductors)	-	1000	-
25.16 to 25.25(Supply connection and external flexible cords)	-	1000	-
25.15(Supply connection and external flexible cords)	-	1000	-
25.14(Supply connection and external flexible cords)	-	1000	-
25.14(Supply connection and external flexible cords)	-	1000	-
25.9 to 25.13(Supply connection and external flexible cords)	-	1000	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	1000	-
25.5 to 25.7(Supply connection and external flexible cords)	-	1000	-
25.4(Supply connection and external flexible cords)	-	1000	-
25.3(Supply connection and external flexible cords)	-	1000	-
25.2(Supply connection and external flexible cords)	-	1000	-
25.1(Supply connection and external flexible cords)	-	1000	-
24.101(Components)	-	1000	-
24.101(Components)	-	1000	-
24.2 to 24.6(Components)	-	1000	-
24.1(Components)	-	1000	-
23.6 to 23.10(Internal wiring)	-	1000	-
23.5(Internal wiring)	-	1000	-
23.4(Internal wiring)	-	1000	-
23.3(Internal wiring)	-	1000	-
23.1 & 23.2(Internal wiring)	-	1000	-
22.111(Constructions)	-	1000	-
22.111(Constructions)	-	1000	-
22.11o(Constructions)	-	1000	-
22.109(Constructions)	-	1000	-
22.108(Constructions)	-	1000	-
22.101 to 22.107(Constructions)	-	1000	-
22.13 to 22.48(Constructions)	-	1000	-
22.12(Constructions)	-	1000	-
22.11(Constructions)	-	1000	-
22.11(Constructions)	-	1000	-
22.7 to 22.10(Constructions)	-	1000	-
22.6(Constructions)	-	1000	-
22.5(Constructions)	-	1000	-
22.4(Constructions)	-	1000	-
22.3(Constructions)	-	1000	-
22.2(Constructions)	-	1000	-
22.1(Constructions)	-	1000	-
21.101(MECHANICAL STRENGTH)	-	1000	-
21.101(MECHANICAL STRENGTH)	-	1000	-
21.2(MECHANICAL STRENGTH)	-	1000	-
21.1(MECHANICAL STRENGTH)	-	1000	-
20.2(Stability and mechanical hazards)	-	1000	-
20.1(Stability and mechanical hazards)	-	1000	-
19.104(ABNORMAL OPERATION)	-	1000	-
19.103(ABNORMAL OPERATION)	-	1000	-
19.102(ABNORMAL OPERATION)	-	1000	-
19.101(ABNORMAL OPERATION)	-	1000	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
16.3(Insulation resistance test)	-	1000	-
16.3(Electric strength test)	-	1000	-
16.1 & 16.2(Leakage current test)	-	1000	-
15.3(Moisture resistance)	-	1000	-
15.3(Moisture resistance)	-	1000	-
15.3(Moisture resistance)	-	1000	-
15.2(Moisture resistance)	-	1000	-
15.2(Moisture resistance)	-	1000	-
15.2(Moisture resistance)	-	1000	-
15.2(Moisture resistance)	-	1000	-
15.1(Moisture resistance)	-	1000	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	1000	-
13.3 and Table No.- 4(Electric strength test)	-	1000	-
13.1, 13.2(Leakage current test)	-	1000	-
13.1, 13.2(Leakage current test)	-	1000	-
11.101(Heating)	-	1000	-
11.1 to 11.8, Table No.-3(Heating)	-	1000	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	1000	-
8.1.5(Protection against access to live parts)	-	1000	-
8.1.4(Protection against access to live parts)	-	1000	-
8.1.3(Protection against access to live parts)	-	1000	-
8.1.2(Protection against access to live parts)	-	1000	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	1000	-
7.14(Legibility & Durability of Markings test)	-	1000	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	1000	-
32(Radiation, toxicity and similar hazards)	-	1000	-
31(Resistance to rusting)	-	3000	-
31(Resistance to rusting)	-	3000	-
30.2.4(Resistance to heat and fire)	-	1000	-
30.2(Resistance to heat and fire)	-	1000	-
30.1(Resistance to heat and fire)	-	1000	-
29.3(Clearances, creepage distances and solid insulation)	-	1000	-
29.2(Clearances, creepage distances and solid insulation)	-	1000	-
29.2(Clearances, creepage distances and solid insulation)	-	1000	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	1000	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	1000	-
28.2 to 28.4(Screws and connections)	-	1000	-
28.1, Table No.-14(Screws and connections)	-	1000	-
27.6(Provision for earthing)	-	1000	-
27.5(Provision for earthing)	-	1000	-
27.1 to 27.4(Provision for earthing)	-	1000	-
26.10 & 26.11(Terminals for external conductors)	-	1000	-
26.9(Terminals for external conductors)	-	1000	-
26.1 to 26.8(Terminals for external conductors)	-	1000	-
25.16 to 25.25(Supply connection and external flexible cords)	-	1000	-
25.15(Supply connection and external flexible cords)	-	1000	-
25.14(Supply connection and external flexible cords)	-	1000	-
25.14(Supply connection and external flexible cords)	-	1000	-
25.9 to 25.13(Supply connection and external flexible cords)	-	1000	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	1000	-
25.5 to 25.7(Supply connection and external flexible cords)	-	1000	-
25.4(Supply connection and external flexible cords)	-	1000	-
25.3(Supply connection and external flexible cords)	-	1000	-
25.2(Supply connection and external flexible cords)	-	1000	-
25.1(Supply connection and external flexible cords)	-	1000	-
24.101(Components)	-	1000	-
24.101(Components)	-	1000	-
24.2 to 24.6(Components)	-	1000	-
24.1(Components)	-	1000	-
23.6 to 23.10(Internal wiring)	-	1000	-
23.5(Internal wiring)	-	1000	-
23.4(Internal wiring)	-	1000	-
23.3(Internal wiring)	-	1000	-
23.1 & 23.2(Internal wiring)	-	1000	-
22.111(Constructions)	-	1000	-
22.111(Constructions)	-	1000	-
22.11o(Constructions)	-	1000	-
22.109(Constructions)	-	1000	-
22.108(Constructions)	-	1000	-
22.101 to 22.107(Constructions)	-	1000	-
22.13 to 22.48(Constructions)	-	1000	-
22.12(Constructions)	-	1000	-
22.11(Constructions)	-	1000	-
22.11(Constructions)	-	1000	-
22.7 to 22.10(Constructions)	-	1000	-
22.6(Constructions)	-	1000	-
22.5(Constructions)	-	1000	-
22.4(Constructions)	-	1000	-
22.3(Constructions)	-	1000	-
22.2(Constructions)	-	1000	-
22.1(Constructions)	-	1000	-
21.101(MECHANICAL STRENGTH)	-	1000	-
21.101(MECHANICAL STRENGTH)	-	1000	-
21.2(MECHANICAL STRENGTH)	-	1000	-
21.1(MECHANICAL STRENGTH)	-	1000	-
20.2(Stability and mechanical hazards)	-	1000	-
20.1(Stability and mechanical hazards)	-	1000	-
19.104(ABNORMAL OPERATION)	-	1000	-
19.103(ABNORMAL OPERATION)	-	1000	-
19.102(ABNORMAL OPERATION)	-	1000	-
19.101(ABNORMAL OPERATION)	-	1000	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	2000	-
16.3(Insulation resistance test)	-	1000	-
16.3(Electric strength test)	-	1000	-
16.1 & 16.2(Leakage current test)	-	1000	-
15.3(Moisture resistance)	-	1000	-
15.3(Moisture resistance)	-	1000	-
15.3(Moisture resistance)	-	1000	-
15.2(Moisture resistance)	-	1000	-
15.2(Moisture resistance)	-	1000	-
15.2(Moisture resistance)	-	1000	-
15.2(Moisture resistance)	-	1000	-
15.1(Moisture resistance)	-	1000	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	1000	-
13.3 and Table No.- 4(Electric strength test)	-	1000	-
13.1, 13.2(Leakage current test)	-	1000	-
13.1, 13.2(Leakage current test)	-	1000	-
11.101(Heating)	-	1000	-
11.1 to 11.8, Table No.-3(Heating)	-	1000	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	1000	-
8.1.5(Protection against access to live parts)	-	1000	-
8.1.4(Protection against access to live parts)	-	1000	-
8.1.3(Protection against access to live parts)	-	1000	-
8.1.2(Protection against access to live parts)	-	1000	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	1000	-
7.14(Legibility & Durability of Markings test)	-	1000	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	1000	-
32(Radiation ,Toxicity and similar hazards)	-	1000	-
31(Resistance to Rusting)	-	1000	-
30(Resistance to Heat & Fire)	-	1000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	1000	-
28(Screws & Connections)	-	1000	-
27(Provision For Earthing)	-	2000	-
26(Terminals For External Conductors)	-	2000	-
25(Supply Connection & External Flexible Cords)	-	2000	-
24(Components)	-	2000	-
23(Internal wiring)	-	3000	-
22(Construction)	-	5000	-
21(Mechanical strength)	-	3000	-
20(Stability & Mechanical Hazards)	-	2000	-
19(Abnormal Operation)	-	3000	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	2000	-
16(Leakage Current and Electric Strength)	-	2000	-
15(Moisture Resistance)	-	3000	-
14(Transient Over Voltage)	-	3000	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	3000	-
11(Temperature Rise/ Heating)	-	4000	-
10(Power Input & Current)	-	3000	-
9(Starting Of Motor Operated Appliances)	-	0	-
8(Protection against access to live parts)	-	4000	-
32(Radiation ,Toxicity and similar hazards)	-	3000	-
31(Resistance to Rusting)	-	3000	-
30(Resistance to Heat & Fire)	-	3000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	3000	-
28(Screws & Connections)	-	2000	-
27(Provision For Earthing)	-	2000	-
26(Terminals For External Conductors)	-	2000	-
25(Supply Connection & External Flexible Cords)	-	2000	-
24(Components)	-	2000	-
23(Internal wiring)	-	3000	-
22(Construction)	-	5000	-
21(Mechanical strength)	-	3000	-
20(Stability & Mechanical Hazards)	-	2000	-
19(Abnormal Operation)	-	3000	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	2000	-
16(Leakage Current and Electric Strength)	-	2000	-
15(Moisture Resistance)	-	3000	-
14(Transient Over Voltage)	-	3000	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	3000	-
11(Temperature Rise/ Heating)	-	4000	-
10(Power Input & Current)	-	3000	-
9(Starting Of Motor Operated Appliances)	-	0	-
8(Protection against access to live parts)	-	4000	-

19 Jul, 2027

-
Included w.e.f 26.06.2025 Exclusion: Cl 19.11.4.1-19.11.4.7(EMI/EMC)

IS 17861 (2022)

TEXTILE BOOTS WITH POLYMERIC SOLE JUNGLE BOOTS - SPECIFICATION Third Revision

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause-5.1(Design)	-	100	-
Clause-5.2(Size and Fitting)	-	100	-
Clause-5.3(Height of Upper)	-	1080	-
Clause-5.4(Weight)	-	150	-
Clause-5.5.1(Construction)	-	100	-
Clause-5.5.2(Upper – Outsole Bond Strength)	-	1080	-
Clause-5.5.3(Consolidation Test (For Type 1 and Type 2))	-	1000	-
Clause-5.5.4(Ergonomic Features)	-	300	-
Clause-5.5.5(Slip Resistance)	-	2500	-
Clause-5.5.6(Energy Absorption of Seat Region)	-	630	-
Clause-5.5.7(Water Resistance)	-	1000	-
Clause-5.6.1(Penetration Resistance)	-	630	-
Clause-5.6.2(Electrical Resistance (Antistatic))	-	1500	-
Clause-5.6.3(Heat Insulation of Sole Complex)	-	900	-
Clause-5.6.4(Cold Insulation of Sole Complex)	-	900	-
Clause-5.7.1(Material)	-	150	-
Clause-5.7.2(Tear Strength)	-	500	-
Clause-5.7.3(Water Vapour Permeability and Coefficient)	-	630	-
Clause-5.7.4(Colour Fastness:Washing)	-	1000	-
Clause-5.8.2(Tear Strength)	-	500	-
Clause-5.8.3(Abrasion Resistance)	-	500	-
Clause-5.8.4(Water Vapour Permeability and Coefficient)	-	700	-
Clause-5.9.1(Tear Strength)	-	500	-
Clause-5.10.1(Binding Tape)	-	500	-
Clause-5.11.1(Closing Thread)	-	100	-
Clause-5.12.1(Material and Thickness)	-	250	-
Clause-5.12.2(Abrasion Resistance)	-	1350	-
Clause-5.12.3(Water Absorption and Desorption)	-	630	-
Clause-5.13.1(Material and Thickness)	-	250	-
Clause-5.13.2(Abrasion Resistance)	-	1080	-
Clause-5.13.3(Bond Strength of Textile Layer and Insock)	-	1080	-
Clause-5.15(Toe Puff and Counter Stiffener)	-	250	-
Clause-5.16.1(Material)	-	150	-
Clause-5.16.2(Thickness)	-	150	-
Clause-5.16.3(Sole Density)	-	300	-
Clause-5.16.4(Hardness)	-	600	-
Clause-5.16.5(Ageing)	-	200	-
Clause-5.16.6(Tear Strength)	-	500	-
Clause-5.16.7(Abrasion Resistance)	-	1080	-
Clause-5.16.8(Flexing Resistance)	-	1080	-
Clause-5.16.9(Hydrolysis)	-	2700	-
Clause-5.16.10(Interlayer Bond Strength)	-	1080	-
Clause-5.17(Eyelets)	-	100	-
Clause-5.18.1(Material)	-	100	-
Clause-5.18.2(Colour Fastness (Light, Washing))	-	1000	-
Clause-5.18.3(Breaking Load and Tag Retention)	-	500	-
Clause-5.18.4.1(Lace to lace)	-	800	-
Clause-5.18.4.2(Lace to eyelet)	-	600	-
Clause-6, Table no. 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	3000	-
Clause-7(Marking)	-	100	-
Cl-5.11.2(Colour fastness to washing)	-	1000	-
Cl-5.11.2(Colour fastness to perspiration)	-	1000	-
Cl-5.10.2(Colour fastness to washing)	-	1000	-
Cl 5.9(Outer Toe Cap (minimum thickness))	-	500	-
Cl- 6, Table No 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	2500	-
Cl-6, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	2500	-
Cl-6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	2500	-
Cl-6, Table no-1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	1350	-
Cl-6, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	1350	-
Cl-6, Table no-1 of IS 17011 (vii)(Formaldehyde)	-	1350	-
Cl-6, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	3700	-
Cl-6, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	2500	-
Cl-6, Table no 1 of IS 17011 (x)(pH)	-	2500	-
Cl-6, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	4500	-
Cl-6, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	2500	-
Cl-5.7.5 (Amendment No-1)(Water Repellency)	-	1000	-
Cl-5.7.5 (Amendment No-1)(Water Resistance)	-	1000	-
Cl-5.9.2 (Amendment No-1)(Abrasion Resistance Test)	-	1500	-

19 Jul, 2027

-
-

IS 3735 (1996)

Canvas Shoes, Rubber Sole

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4.5 Consolidation Test IS 3400 (Part 5) : 1986 (From the quarter, cut a strip of 25.0 ± 0.5 mm width along the leagth of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30N (3.0 kgf) for each of the teat piecea (see Note under 4.4).')	-	800	-
4.1.1 Upper, Sl No. (i) of Table 1(The upper shall consist of over layer of cotton, manmade or blended conforming' to the requirements given in Sl No. (i) of Table 1 as an overlayer and cotton drill conforming to the requirements given in Sl No. (ii) of Table 1, as an inner layer or lining. The two fabrics shall be firmly adhered together with rubber compound. )	-	500	-
Cl.4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast todaylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454: 1985. However in case of dispute the method prescribed in IS 686 : 1985 shall be considered as referee method.)	-	500	-
Cl.4.1.2 Binding Material(IS 1954 : 1990) (IS1969 : 1985)(Cotton tape NEWAR used as binding material shall conform to the requirements prescribed in col 3 of Table 2, when tested in accordance with the methods referred to in col 4 of the table.)	-	500	-
Cl.4.1.2.1 Anmex B.(Cotton, manmade or blended shall be used as binding material.' 'Coloured cotton tapes shall have fastness to day light of rating as and if agreed to between the purchaser and the supplier when tested in accordance with IS 686 : 1985. The black tapes shall be free from sulphur dyes when tested in accordance with Annex B.')	-	500	-
Cl.4.1.3.1( Sewing thread cotton, manmade or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification.')	-	500	-
Cl.4.1.3.2 (IS 2454 : 1985) IS 765 : 1979 IS 971 : 1966( The colour of the threads shall be as agreedto between the purchaser and the supplier. The dyed threads shall conform to the following requirements or IS 686 : 1985'.)	-	500	-
Cl.4.1.4(.Brass, steel or aluminium eyelets of 7.5 mm diameter and wall thickness 0.30 to 0.35 mm shall be used.')	-	500	-
Cl.4.1.5 Laces( The shoes shall be provided with fabric braided laces either matching the shade of the upper or black or The length of the lace shall be 60 ± 3 cm )	-	500	-
Cl.4.1.6 Rubber Components(The rubber components shall conform to the requirements given in Table 4, when tested from finished boots.However in case it is not possible to cut the test pieces from the made up boots then 4.1.5.3 of IS 13695 : 1993 shall be followed.')	-	500	-
Cl.4.1.6.2 Ageing col 4 of Table 5.(The shoes shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the shoes shall conform to the physical requirements prescribed in col 4 of Table 5. )	-	500	-
Cl.4.1.6.2 Ageing (None of the rubber components of the shoes shall show any sign of tackiness or crack developed after ageing, when examined visually)	-	500	-
Cl.4.1.6.3 Thickness of components in Table 6.(Individual components of the shoes shall comply with the thickness and material requirements prescribed in Table 6.)	-	500	-
CL.4.2 Shape and Design IS 1638 : 1969(Cl 4.2.1 The shoes shall be made according to design and pattern as agreed to between the purchaser and the supplier. Size and fittings of the shoes shall be in accordance with IS 1638 : 1969 unless otherwise specified by the purchaser.)	-	2000	-
Cl.4.2.2( The recommended design of canvas shoes is shown in Fig. 1.)	-	500	-
Cl.4.3 Construction Cl 4.3.1( The upper shall be stitched on a lock stitch machine and the number of stitches shall be 30 to 40 per dm.)	-	1000	-
Cl.'4.3.2( Back of the upper shall be reinforced with a strip of upper material when there is a seam.')	-	500	-
Cl.4.3.3( The counter shall be stitched at the back, set from bottom of lining and bound flat on top edge with white/scoured binding material cut in bias and formed as a tape. T )	-	500	-
Cl.4.3.4 (The vantp shall be strengthened with a rubber toe-cap (see Fig. 1).)	-	500	-
Cl.4.3.5( Five pairs of eyelets shall be fitted in each shoe. The eyelets shall be properly clenched without any distortion. It shall properly match the colour of the upper canvas, or as agreed to between the purchaser and the supplier.)	-	500	-
Cl.4.3.6( The shoes shall be free from folds, wrinkles in the upper, blisters, embedded foreign matters and excessive surface markings. In appearance, general workmanship, finish and all other respects, not defined in the standard, the shoes shall be similar to the sample approved by the purchaser, if any)	-	500	-
CL.4.3.7( The soles shall be of even substance and ofone layer only.)	-	500	-
Cl.4.3.8( A rubber foxing shall be fixed all round the sole and heel. The colour shall be as agreed to between the purchaser and the supplier. )	-	500	-
Cl.4.4 Adhesion Test(From the upper-foxing portion where it is adhered to the canvas, parallel to the waist of sole, cut a strip of length 100 mm and width 8 mm. Separate out the plies initially by breaking the bond to a length of about 75 mm. Carry out the test on two specimens in accordance with IS 3400 (Part 5) : 1986. There shall be no further separation within 1 minute at a load of 1 kg for each of the two specimens.)	-	1000	-
CL.4.6 Mass(The mass of one pair of finished shoes of size 8 shall not exceed 750 g with an increase or decrease of 25 g for each bigger or smaller size respectively)	-	1000	-
4.1.1.2(Colorfastness to washing)	-	1000	-

19 Jul, 2027

-
-

IS 15844 : Part 2 (2023)

SPORTS FOOTWEAR PART -2 PERFORMANCE SPORTS FOOTWEAR

68000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.12, Table no. 1 of IS 17011,(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	3500	-
7.12, Table no. 1 of IS 17011,(xi)(Phthalates (each individual phthalate))	-	6000	-
7.12, Table no. 1 of IS 17011,(x)(pH)	-	500	-
7.12, Table no. 1 of IS 17011,(ix)(PCP-TeCP-TriCP polychlorophenols)	-	4500	-
7.12, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	7000	-
7.12, Table no. 1 of IS 17011,(vii)(Formaldehyde)	-	2500	-
7.12, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	5000	-
7.12, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	2100	-
7.12, Table no. 1 of IS 17011,(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3700	-
7.12, Table no. 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	4500	-
8(MARKING AND PACKING)	-	180	-
4(SAMPLING AND CONDITIONING)	-	180	-
5(DESIGN)	-	180	-
6(SIZE AND FITTINGS)	-	180	-
7.1.1(Whole Footwear)	-	180	-
7.1.2(Upper to Mid Sole/Out Sole Bond Performance)	-	1080	-
7.1.3("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	1080	-
7.1.4(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	1080	-
7.1.5(Energy Absorption at Seat Region)	-	700	-
7.1.6(Complete Shoe Flexing)	-	1500	-
7.1.7(Washability)	-	1000	-
7.1.8(Slip Resistance)	-	2500	-
7.1.9(Heel Drop)	-	180	-
7.2 , Table No. 2 , i)(Flexing resistance)	-	1500	-
7.2 , Table No. 2 , ii)(Tear strength (average force))	-	500	-
7.2 , Table No. 2 , iii)("Colour fastness rubbing (To and fro) Grey scale rate Dry: (rubbing) Rating: (Marring and staining) ")	-	500	-
7.2 , Table No. 2 , iv) ,a)(Water vapour permeability)	-	700	-
7.2 , Table No. 2 , vii)(Tensile strength)	-	500	-
7.2 , Table No. 2 , viii)(Elongation at break,)	-	500	-
7.2 , Table No. 2 , ix)("Water penetration and water absorption after 60 Minutes Water absorption %, Max Water penetration Gms, Max")	-	700	-
7.2 , Table No. 2 , x)(Abrasion test (for unlined upper))	-	1350	-
7.2 , Table No. 3 , i)(Breaking strength "As per Method 1 of IS 7016 (Part 2)/ ISO 1421 : 2016 or ISO 17706")	-	500	-
7.2 , Table No. 3 , ii)(Elongation at break)	-	500	-
7.2 , Table No. 3 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	500	-
7.2 , Table No. 3 , iv)(Strength at needle perforation)	-	600	-
7.2 , Table No. 3 , v)("Flexing resistance, no crack/damage to coating/ lamination / upper material till prescribed cycles")	-	1500	-
7.2 , Table No. 3 , vi) , a)(Water vapour permeability,)	-	700	-
7.2 , Table No. 3 , vi) , b)("Water vapour coefficient, ")	-	700	-
7.2 , Table No. 3 , vii)(Hydrolysis resistance)	-	2700	-
7.2 , Table No. 3 , viii)(Colour fastness to light grey scale rate)	-	300	-
7.2 , Table No. 3 , ix)(Bursting Strength,)	-	1000	-
7.3 , Table No. 4 , ii)(Abrasion resistance, cycles)	-	500	-
7.3 , Table No. 4 , i)(Tear strength,)	-	500	-
7.3 , Table No. 4 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, ")	-	500	-
7.3 , Table No. 4 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, ")	-	300	-
7.3 , Table No. 4 , v) , b)("Water vapour coefficient, " As per IS 15298 (Part 1))	-	700	-
7.4 , Table No. 5 , i)(Thickness)	-	180	-
7.4 , Table No. 5 , ii)(Flexing index)	-	800	-
7.4 , Table No. 5 , iii)(Abrasion resistance, at 400 cycles)	-	1350	-
7.4 , Table No. 5 , iv) , a)(Water Absorption,)	-	700	-
7.4 , Table No. 5 , iv) , b)(Water Desorption)	-	700	-
7.5 , Table No. 6 , i)(Thickness)	-	180	-
7.5 , Table No. 6 , ii)(Abrasion resistance, cycles As per IS 15298 (Part 1))	-	1350	-
7.5 , Table No. 6 , iii) , a)(Water Absorption)	-	700	-
7.5 , Table No. 6 , iv)(Heat resistance shrinkage linear)	-	1000	-
7.6 , Table No. 7 , i)(Abrasion resistance (volume loss))	-	1350	-
7.6 , Table No. 7 , ii)(Flexing resistance)	-	1080	-
7.6 , Table No. 7 , iii)(Hydrolysis resistance, cut growth after 1 50 000 flexes)	-	2700	-
7.6 , Table No. 7 , iv)(Tear strength)	-	500	-
7.6 , Table No. 7 , v)(Tensile strength)	-	500	-
7.8 , Table No. 9 , i)(First dry collapsing load, hardness)	-	800	-
7.6 , Table No. 7 , vii)(Compression set)	-	800	-
7.7 , Table No. 8 , i)(Compression set)	-	800	-
7.7 , Table No. 8 , ii)(Split tear strength,)	-	500	-
7.7 , Table No. 8 , iii)(Heat shrinkage,)	-	1000	-
7.8 , Table No. 9 , ii)(Resilience)	-	800	-
7.8 , Table No. 9 , iii)(Moisture resistance)	-	800	-
7.8 , Table No. 9 , iv) , a)(Initial dry area shape retention)	-	800	-
7.8 , Table No. 9 , iv) , b)(Area shape retention after 10th collapse, dry)	-	800	-
7.8 , Table No. 9 , v)(Peel strength)	-	1500	-
7.9 , Table No. 10 , i)(Peel strength)	-	1500	-
7.9 , Table No. 10 , ii)(Shear strength)	-	1500	-
7.10 , Table No. 11 , i)(Limit of useful extension,)	-	1000	-
7.10 , Table No. 11 , ii)(Needle strength,)	-	600	-
7.11 , Table No. 12 , i)(Breaking strength of lace,)	-	500	-
7.11 , Table No. 12 , ii)(Lace tag strength,)	-	500	-
7.11 , Table No. 12 , iii)(Lace to lace abrasion,)	-	800	-
7.11 , Table No. 12 , iv)("Colour fastness to water Gray Scale Rate")	-	500	-
7.11 , Table No. 12 , v)(Strength of Buckle/Ski hook)	-	800	-
7.11 , Table No. 12 , vi)(Corrosion resistance)	-	900	-
7.12("Chemical Requirement on Complete Product for All Types of Sports Shoe")	-	35000	TOTAL PRICE WITH CHEMICAL TEST 68000; WITHOUT CHEMICAL TEST 33000 10% DISCOUNT TO BIS
7.12.2 (Amendment 1)(Lead content)	-	5000	-
7.12.2 (Amendment 1)(Lead content)	-	2000	-

19 Jul, 2027

-
-

IS 302 : Part 2 : Sec 3 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 3 electric iron (First Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	100	-
6(Classification- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.3(Marking- IS 302-1)	-	100	-
7.4(Marking- IS 302-1)	-	100	-
7.6(Marking- IS 302-1)	-	100	-
7.7(Marking- IS 302-1)	-	100	-
7.8(Marking- IS 302-1)	-	100	-
7.11(Marking- IS 302-1)	-	100	-
7.12(Marking- IS 302-1)	-	100	-
7.13(Marking- IS 302-1)	-	100	-
7.14(Marking- IS 302-1)	-	100	-
7.15(Marking- IS 302-1)	-	100	-
7.101(Marking)	-	100	-
8( Protection Against Electric Shock, IS 302-1)	-	100	-
10(Power Input and Current, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	100	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	100	-
14(Transient Over Voltages, IS 302-1)	-	100	-
15.1(Moisture Resistance, IS 302-1)	-	100	-
15.2(Moisture Resistance, IS 302-1)	-	100	-
15.3(Moisture Resistance, IS 302-1)	-	100	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	100	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	100	-
19.4(Abnormal Operation, IS 302-1)	-	100	-
19.4(Abnormal Operation, IS 302-1)	-	100	-
19.5(Abnormal Operation, IS 302-1)	-	100	-
19.7(Abnormal Operation)	-	100	-
19.9(Abnormal Operation)	-	100	-
19.1(Abnormal Operation)	-	100	-
19.101(Abnormal Operation)	-	100	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	100	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	100	-
21.1(Mechanical Strength, IS 302-1)	-	100	-
21.2(Mechanical Strength, IS 302-1)	-	100	-
21.101(Mechanical Strength, IS 302-2-3)	-	100	-
22(Construction, IS 302-1)	-	100	-
22.101(Construction)	-	100	-
22.102(Construction)	-	100	-
22.103(Construction)	-	100	-
22.104(Construction)	-	100	-
22.105(Construction)	-	100	-
22.106(Construction)	-	100	-
22.107(Construction)	-	100	-
23.1(Internal Wiring, IS 302-1)	-	100	-
23.2(Internal Wiring, IS 302-1)	-	100	-
23.3(Internal Wiring, IS 302-1)	-	100	-
23.4(Internal Wiring, IS 302-1)	-	100	-
23.5(Internal Wiring, IS 302-1)	-	100	-
23.6(Internal Wiring, IS 302-1)	-	100	-
23.7(Internal Wiring, IS 302-1)	-	100	-
23.8(Internal Wiring, IS 302-1)	-	100	-
23.9(Internal Wiring, IS 302-1)	-	100	-
23.10(Internal Wiring, IS 302-1)	-	100	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
26(Terminals for External Conductors, IS 302-1)	-	100	-
27.1(Provision for Earthing, IS 302-1)	-	100	-
27.2(Provision for Earthing, IS 302-1)	-	100	-
27.3(Provision for Earthing, IS 302-1)	-	100	-
27.4(Provision for Earthing, IS 302-1)	-	100	-
27.5(Provision for Earthing, IS 302-1)	-	100	-
28(Screws & Connections, IS 302-1)	-	100	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	100	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	100	-
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	100	-
30.2(Resistance to Heat, Fire & Tracking, IS 302-1)	-	100	-
31(Resistance of Rusting, IS 302-1)	-	100	-
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	100	-
4(General requirement)	-	100	-
16(Leakage current and electric strength)	-	100	-
17(Overload protection of transformers and associated circuits)	-	100	-
17(Overload protection of transformers and associated circuits)	-	100	-
17(Overload protection of transformers and associated circuits)	-	100	-
18(Endurance)	-	100	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	100	-
19(Abnormal operation)	-	100	-
25(Supply Connection and External Flexible Cords)	-	100	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
19.5(Abnormal Operation, IS 302-1)	-	100	-

19 Jul, 2027

-
Included w.e.f 25.03.2025 Exclusion : Cl 19.11.4.1 to Cl 19.11.4.1(EMI/EMC), Cl 24 Components

IS 15298 : part 4 (2024)

Personal Protective Equipment Part 4 Occupational Footwear (ISO 20347 : 2021, MOD) (Third Revision)

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.2(Design)	-	1000	-
Cl 5.2.2(" Height of upper ")	-	1000	-
Cl 5.2.3(Heel area)	-	1000	-
Cl 5.3.1.1(Construction of whole footwear)	-	1000	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	1000	-
Cl 5.3.2(Leak proofness)	-	1000	-
Cl 5.3.3(Specific ergonomic features)	-	1000	-
Cl 5.3.4.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	1000	-
Cl 5.3.5, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (x)(pH)	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	1000	-
Cl 5.3.6(Seam strength)	-	1000	-
Cl 5.3.7(Lead Content ( National Annex A))	-	1000	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	1000	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	1000	-
Cl 5.4.2(Thickness)	-	1000	-
Cl 5.4.3(Tear strength)	-	1000	-
Cl 5.4.4, Table 9(Tensile properties- Tensile strength)	-	1000	-
Cl 5.4.4, Table 9(Tensile properties- Breaking Force)	-	1000	-
Cl 5.4.4, Table 9(Tensile properties-Modulus at 100 % elongation)	-	1000	-
Cl 5.4.4, Table 9(Tensile properties- Elongation at break)	-	1000	-
Cl 5.4.5(Flexing resistance)	-	1000	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	1000	-
Cl 5.4.7(Resistance to hydrolysis)	-	1000	-
Cl 5.5.2(Lining- Tear strength)	-	1000	-
Cl 5.5.3(Lining- Abrasion resistance)	-	1000	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	1000	-
Cl 5.6.2(Tear strength of tongue)	-	1000	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	1000	-
Cl 5.7.2(Water permeability of insock)	-	1000	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	1000	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	1000	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	1000	-
Cl 5.8.2.1(Thickness of Outsole)	-	1000	-
Cl 5.8.2.2(Cleated area)	-	1000	-
Cl 5.8.2.3(Cleat height)	-	1000	-
Cl 5.8.3(Outsole- Tear strength)	-	1000	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	1000	-
Cl 5.8.5(Outsole-Flexing resistance)	-	1000	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	1000	-
Cl 5.8.7(Interlayer bond strength)	-	1000	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	1000	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	1000	-
Cl 6.2.1.1.4(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	1000	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	1000	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	1000	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	1000	-
Cl 6.2.1.4.2.1(ISO 20344:2021, 5.11.2)	-	1000	-
Cl 6.2.1.4.2.2(ISO 20344:2021, 5.6.2.1)	-	1000	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	1000	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	1000	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	1000	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	1000	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	1000	-
Cl 6.2.4(Energy absorption of seat region)	-	1000	-
Cl 6.2.5(Water resistance)	-	1000	-
Cl 6.2.6(Ankle protection)	-	1000	-
Cl 6.2.7.1(Cut resistance footwear- design)	-	1000	-
Cl 6.2.7.2(Dimensions and construction of protective area of Cut resistance footwear)	-	1000	-
Cl 6.2.7.3(Resistance to cutting)	-	1000	-
Cl 6.2.8(Scuff cap)	-	1000	-
Cl 6.2.9("Slip resistance on ceramic tile floor with glycerine ")	-	1000	-
Cl 6.3(Upper — Water penetration and absorption)	-	1000	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	1000	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	1000	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	1000	-
Cl 6.4.3.2(Design of Ladder grip)	-	1000	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	1000	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	1000	-
Cl 7("Marking ")	-	500	-
Cl 5.2(Design)	-	1000	-
Cl 5.2.2(" Height of upper ")	-	1000	-
Cl 5.2.3(Heel area)	-	1000	-
Cl 5.3.1.1(Construction of whole footwear)	-	1000	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	1000	-
Cl 5.3.2(Leak proofness)	-	1000	-
Cl 5.3.3(Specific ergonomic features)	-	1000	-
Cl 5.3.4.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	1000	-
Cl 5.3.5, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (x)(pH)	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	1000	-
Cl 5.3.6(Seam strength)	-	1000	-
Cl 5.3.7(Lead Content ( National Annex A))	-	1000	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	1000	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	1000	-
Cl 5.4.2(Thickness)	-	1000	-
Cl 5.4.3(Tear strength)	-	1000	-
Cl 5.4.4, Table 9(Tensile properties- Tensile strength)	-	1000	-
Cl 5.4.4, Table 9(Tensile properties- Breaking Force)	-	1000	-
Cl 5.4.4, Table 9(Tensile properties-Modulus at 100 % elongation)	-	1000	-
Cl 5.4.4, Table 9(Tensile properties- Elongation at break)	-	1000	-
Cl 5.4.5(Flexing resistance)	-	1000	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	1000	-
Cl 5.4.7(Resistance to hydrolysis)	-	1000	-
Cl 5.5.2(Lining- Tear strength)	-	1000	-
Cl 5.5.3(Lining- Abrasion resistance)	-	1000	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	1000	-
Cl 5.6.2(Tear strength of tongue)	-	1000	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	1000	-
Cl 5.7.2(Water permeability of insock)	-	1000	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	1000	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	1000	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	1000	-
Cl 5.8.2.1(Thickness of Outsole)	-	1000	-
Cl 5.8.2.2(Cleated area)	-	1000	-
Cl 5.8.2.3(Cleat height)	-	1000	-
Cl 5.8.3(Outsole- Tear strength)	-	1000	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	1000	-
Cl 5.8.5(Outsole-Flexing resistance)	-	1000	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	1000	-
Cl 5.8.7(Interlayer bond strength)	-	1000	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	1000	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	1000	-
Cl 6.2.1.1.4(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	1000	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	1000	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	1000	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	1000	-
Cl 6.2.1.4.2.1(ISO 20344:2021, 5.11.2)	-	1000	-
Cl 6.2.1.4.2.2(ISO 20344:2021, 5.6.2.1)	-	1000	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	1000	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	1000	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	1000	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	1000	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	1000	-
Cl 6.2.4(Energy absorption of seat region)	-	1000	-
Cl 6.2.5(Water resistance)	-	1000	-
Cl 6.2.6(Ankle protection)	-	1000	-
Cl 6.2.7.1(Cut resistance footwear- design)	-	1000	-
Cl 6.2.7.2(Dimensions and construction of protective area of Cut resistance footwear)	-	1000	-
Cl 6.2.7.3(Resistance to cutting)	-	1000	-
Cl 6.2.8(Scuff cap)	-	1000	-
Cl 6.2.9("Slip resistance on ceramic tile floor with glycerine ")	-	1000	-
Cl 6.3(Upper — Water penetration and absorption)	-	1000	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	1000	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	1000	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	1000	-
Cl 6.4.3.2(Design of Ladder grip)	-	1000	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	1000	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	1000	-
Cl 7("Marking ")	-	500	-

19 Jul, 2027

-
Included w.e.f 01.04.2025

IS 15298 : Part 3 (2024)

Personal Protective Equipment Part 3 Protective Footwear (ISO 20346 : 2021, MOD) (Third Revision)

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.2(Design)	-	1000	-
Cl 5.2.2(" Height of upper ")	-	1000	-
Cl 5.2.3(Heel area)	-	1000	-
Cl 5.3.1.1(Construction of whole footwear)	-	1000	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	1000	-
Cl 5.3.2.1(Toe protection - general)	-	1000	-
Cl 5.3.2.2(Internal length)	-	1000	-
Cl 5.3.2.3(Width of toecap flange)	-	1000	-
Cl 5.3.2.4.1(Corrosion resistance of Class I footwear and hybrid mounted footwear)	-	1000	-
Cl 5.3.2.4.2(Corrosion resistance of Class II and hybrid moulded footwear)	-	1000	-
Cl 5.3.2.5(Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-	1000	-
Cl 5.3.2.6(Impact resistance)	-	1000	-
Cl 5.3.2.7(Compression resistance)	-	1000	-
Cl 5.3.3(Leak proofness)	-	1000	-
Cl 5.3.4("Specific ergonomic features ")	-	1000	-
Cl 5.3.5.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (i)(Allergenic and carcinogenic disperse dyes)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	1000	-
Cl 5.3.6, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (x)(pH)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	1000	-
Cl 5.3.7(Seam strength)	-	1000	-
Cl 5.3.8(Lead Content ( National Annex A))	-	1000	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	1000	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	1000	-
Cl 5.4.2(Thickness)	-	1000	-
Cl 5.4.3(Tear strength)	-	1000	-
Cl 5.4.4, Table 11(Tensile properties- Tensile strength)	-	1000	-
Cl 5.4.4, Table 11(Tensile properties- Breaking Force)	-	1000	-
Cl 5.4.4, Table 11(Tensile properties-Modulus at 100 % elongation)	-	1000	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	1000	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	1000	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	1000	-
Cl 5.4.7(Resistance to hydrolysis)	-	1000	-
Cl 5.5.2(Lining- Tear strength)	-	1000	-
Cl 5.5.3(Lining- Abrasion resistance)	-	1000	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	1000	-
Cl 5.6.2(Tear strength of tongue)	-	1000	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	1000	-
Cl 5.7.2(Water permeability of insock)	-	1000	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	1000	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	1000	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	1000	-
Cl 5.8.2.1(Thickness of Outsole)	-	1000	-
Cl 5.8.2.2(Cleated area)	-	1000	-
Cl 5.8.2.3(Cleat height)	-	1000	-
Cl 5.8.3(Outsole- Tear strength)	-	1000	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	1000	-
Cl 5.8.5(Outsole-Flexing resistance)	-	1000	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	1000	-
Cl 5.8.7(Interlayer bond strength)	-	1000	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	1000	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	1000	-
Cl 6.2.1.1.4(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	1000	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	1000	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	1000	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	1000	-
Cl 6.2.1.4.2.1(Corrosion resistance of perforation resistant metallic insert for Class I footwear and hybrid mounted footwear)	-	1000	-
Cl 6.2.1.4.2.2(Corrosion resistance of perforation resistant metallic insert for Class II footwear and hybrid moulded footwear)	-	1000	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	1000	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	1000	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	1000	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	1000	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	1000	-
Cl 6.2.4(Energy absorption of seat region)	-	1000	-
Cl 6.2.5(Water resistance)	-	1000	-
Cl 6.2.6.1(Metatarsal protection - Construction)	-	1000	-
Cl 6.2.6.2("Metatarsal protection-Impact resistance of metatarsal protective device ")	-	1000	-
Cl 6.2.7(Ankle protection)	-	1000	-
Cl 6.2.8.2(Cut resistance footwear- design)	-	1000	-
Cl 6.2.8.2(Dimensions and construction of protective area of Cut resistance footwear)	-	1000	-
Cl 6.2.8.3(Resistance to cutting)	-	1000	-
Cl 6.2.9(Scuff cap)	-	1000	-
Cl 6.2.10("Slip resistance on ceramic tile floor with glycerine ")	-	1000	-
Cl 6.3(Upper — Water penetration and absorption)	-	1000	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	1000	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	1000	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	1000	-
Cl 6.4.3.2(Design of Ladder grip)	-	1000	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	1000	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	1000	-
Cl 7("Marking ")	-	1000	-
Cl 7("Marking ")	-	1000	-
Cl 5.2(Design)	-	-	-
Cl 5.2.2(" Height of upper ")	-	-	-
Cl 5.2.3(Heel area)	-	-	-
Cl 5.3.1.1(Construction of whole footwear)	-	-	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	-	-
Cl 5.3.2.1(Toe protection - general)	-	-	-
Cl 5.3.2.2(Internal length)	-	-	-
Cl 5.3.2.3(Width of toecap flange)	-	-	-
Cl 5.3.2.4.1(Corrosion resistance of Class I footwear and hybrid mounted footwear)	-	-	-
Cl 5.3.2.4.2(Corrosion resistance of Class II and hybrid moulded footwear)	-	-	-
Cl 5.3.2.5(Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-	-	-
Cl 5.3.2.6(Impact resistance)	-	-	-
Cl 5.3.2.7(Compression resistance)	-	-	-
Cl 5.3.3(Leak proofness)	-	-	-
Cl 5.3.4("Specific ergonomic features ")	-	-	-
Cl 5.3.5.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (i)(Allergenic and carcinogenic disperse dyes)	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	-	-
Cl 5.3.6, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (x)(pH)	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	-	-
Cl 5.3.7(Seam strength)	-	-	-
Cl 5.3.8(Lead Content ( National Annex A))	-	-	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	-	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	-	-
Cl 5.4.2(Thickness)	-	-	-
Cl 5.4.3(Tear strength)	-	-	-
Cl 5.4.4, Table 11(Tensile properties- Tensile strength)	-	-	-
Cl 5.4.4, Table 11(Tensile properties- Breaking Force)	-	-	-
Cl 5.4.4, Table 11(Tensile properties-Modulus at 100 % elongation)	-	-	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	-	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	-	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	-	-
Cl 5.4.7(Resistance to hydrolysis)	-	-	-
Cl 5.5.2(Lining- Tear strength)	-	-	-
Cl 5.5.3(Lining- Abrasion resistance)	-	-	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	-	-
Cl 5.6.2(Tear strength of tongue)	-	-	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	-	-
Cl 5.7.2(Water permeability of insock)	-	-	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	-	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	-	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	-	-
Cl 5.8.2.1(Thickness of Outsole)	-	-	-
Cl 5.8.2.2(Cleated area)	-	-	-
Cl 5.8.2.3(Cleat height)	-	-	-
Cl 5.8.3(Outsole- Tear strength)	-	-	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	-	-
Cl 5.8.5(Outsole-Flexing resistance)	-	-	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	-	-
Cl 5.8.7(Interlayer bond strength)	-	-	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	-	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	-	-
Cl 6.2.1.1.4(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	-	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	-	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	-	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	-	-
Cl 6.2.1.4.2.1(Corrosion resistance of perforation resistant metallic insert for Class I footwear and hybrid mounted footwear)	-	-	-
Cl 6.2.1.4.2.2(Corrosion resistance of perforation resistant metallic insert for Class II footwear and hybrid moulded footwear)	-	-	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	-	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	-	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	-	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	-	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	-	-
Cl 6.2.4(Energy absorption of seat region)	-	-	-
Cl 6.2.5(Water resistance)	-	-	-
Cl 6.2.6.1(Metatarsal protection - Construction)	-	-	-
Cl 6.2.6.2("Metatarsal protection-Impact resistance of metatarsal protective device ")	-	-	-
Cl 6.2.7(Ankle protection)	-	-	-
Cl 6.2.8.2(Cut resistance footwear- design)	-	-	-
Cl 6.2.8.2(Dimensions and construction of protective area of Cut resistance footwear)	-	-	-
Cl 6.2.8.3(Resistance to cutting)	-	-	-
Cl 6.2.9(Scuff cap)	-	-	-
Cl 6.2.10("Slip resistance on ceramic tile floor with glycerine ")	-	-	-
Cl 6.3(Upper — Water penetration and absorption)	-	-	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	-	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	-	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	-	-
Cl 6.4.3.2(Design of Ladder grip)	-	-	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	-	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	-	-
Cl 7("Marking ")	-	-	-
Cl 7("Marking ")	-	-	-

19 Jul, 2027

-
Included w.e.f 01.04.2025

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12(Charging of metal-ion batteries)	-	1000	-
6(Classification)	-	500	-
5(General conditions for the tests)	-	500	-
11.8(Temperature rise)	-	500	-
11.7(Duration corresponding)	-	500	-
11.6(Combined appliances)	-	500	-
11.5(Motor-operated appliances)	-	500	-
11.4(Heating appliances)	-	500	-
8.1.5(Live parts of built-in appliances)	-	500	-
17(Overload protection of transformers and associated circuits)	-	500	-
16(Leakage current and electric strength)	-	500	-
4(General requirement)	-	500	-
31(Resistance to Rusting)	-	500	-
30.2(Needle Flame Test)	-	500	-
30.2(Glow Wire Test)	-	500	-
30.1(Ball pressure test)	-	500	-
29(clearance, creepage distances and solid insulation)	-	500	-
28(Screw test and connections)	-	500	-
27(Provision for earthing)	-	500	-
26(Terminals for external conductors)	-	500	-
25(Supply connection and external flexible cords)	-	500	-
23(Internal wiring)	-	500	-
22(Construction)	-	500	-
21(Mechanical Strength)	-	500	-
20(Stability and mechanical hazards)	-	500	-
19(Abnormal Operation)	-	500	-
17(Over Load Protection of Transformers and associated circuits)	-	500	-
16.3(Electric Strength (after clause 15 and 16.2))	-	500	-
16.2(Leakage Current (after Clause 15))	-	500	-
16.1(General)	-	500	-
16.0(General)	-	500	-
15.3(Humidity Test)	-	500	-
15.2(Spillage Test)	-	500	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	500	-
14(Transient Over Voltages)	-	500	-
13.3(Electric Strength at operating temperature)	-	500	-
13.2(Leakage current at operating temperature)	-	500	-
13(Leakage current and electric strength at operating temperature)	-	500	-
11.3(Heating)	-	500	-
11.2(General)	-	500	-
11.1(General)	-	500	-
10.2(Current input)	-	500	-
10.1(Power input)	-	500	-
8.1.4(Protection against live parts against protective impedance)	-	500	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	500	-
8.1.2(Protection against live parts in openings)	-	500	-
8.1.1(Protection against live parts in all positions)	-	500	-
7(Marking and instructions)	-	500	-
A.2(Earth continuity test)	-	500	-
15.2(Moisture resistance)	-	500	-
19.17(Abnormal operation)	-	500	-
20.1(Stability and mechanical hazards)	-	500	-
21.2(Mechanical strength)	-	500	-
21.3(Mechanical strength)	-	500	-
22.5(Construction)	-	500	-
22.6(Construction)	-	500	-
22.11(Construction)	-	500	-
22.16(Construction)	-	500	-
22.32(Construction)	-	500	-
22.42(Construction)	-	500	-
23.3(Internal wiring)	-	500	-
25(Supply connection and external flexible cords)	-	500	-
25.7(Supply connection and external flexible cords)	-	500	-
25.14(Supply connection and external flexible cords)	-	500	-
25.15(Supply connection and external flexible cords)	-	500	-
26.5(Terminals for external conductors)	-	500	-
27.5(Provision for earthing)	-	500	-
28.1(Screws and connections)	-	500	-
B.22.1(Construction)	-	500	-
B.22.3(Construction)	-	500	-
B.22.4(Construction)	-	500	-
B.22.5(Construction)	-	500	-
18(Endurance)	-	0	-
9(Starting of motor operation test requirements and tests)	-	0	-
24(Components)	-	500	-
32(Radiation Toxicity and Similar Hazards)	-	500	-
18(Endurance)	-	0	-
15.0(Moisture resistance)	-	500	-
Annex C(Ageing test on motors)	-	500	-
Annex D(Thermal motor protectors)	-	500	-

19 Jul, 2027

-
Included w.e.f 25.03.2025 Exclusion: Cl 19.11.4.1 to Cl 19.11.4.7 (EMI/EMC)

IS 302 : Part 2 : Sec 80 (2017)

Household and similar electrical appliances - Safety: Part 2 - 80 particular requirements for fans (First Revision)

250V for 1Ph, 480V for 3Ph

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Marking and Instructions)	-	2000	10 % discount on BIS samples
7.0(Classification)	-	1000	10 % discount on BIS samples
8.0(Protection against access to live parts)	-	2000	10 % discount on BIS samples
10.0(Input and Current)	-	5000	10 % discount on BIS samples
11.0(Heating)	-	3000	10 % discount on BIS samples
13.0(Leakage Current and electric strength at operating temperature)	-	3000	10 % discount on BIS samples
14.0(Transient Overvoltage)	-	5000	10 % discount on BIS samples
15.0(Moisture resistance)	-	5000	10 % discount on BIS samples
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	3000	10 % discount on BIS samples
17.0(Overload Protection of transformer and associated circuit)	-	5000	10 % discount on BIS samples
19.0(Abnormal Operation)	-	5000	10 % discount on BIS samples
20.0(Stability and mechanical hazards)	-	5000	10 % discount on BIS samples; 302-2-80; A1: 2023
21.0(Mechanical Strength)	-	5000	10 % discount on BIS samples 302-2-80; A1: 2023
22.0(Construction)	-	5000	10 % discount on BIS samples
23.0(Internal Wiring)	-	5000	10 % discount on BIS samples
24.0(Components)	-	2000	10 % discount on BIS samples
25.0(Supply Connection and External Flexible Cords)	-	5000	10 % discount on BIS samples
26.0(Terminals for external conductors)	-	5000	10 % discount on BIS samples
27.0(Provision For Earthing)	-	5000	10 % discount on BIS samples
28.0(Screws and Connections)	-	5000	10 % discount on BIS samples
29.0(Creepage Distances and Clearances)	-	5000	10 % discount on BIS samples
30.0(Resistance To Heat and Fire)	-	5000	10 % discount on BIS samples
31.0(Resistance To Rusting)	-	5000	10 % discount on BIS samples

19 Jul, 2027

-
-

IS 6721 (2023)

SANDAL AND SLIPPERS SPECIFICATION First revision

47000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No.4(SHAPE AND DESIGN)	-	100	-
Cl. No.5("SIZE AND FITTINGS ")	-	100	-
Cl. No.6("CONSTRUCTION ")	-	100	-
Cl. No.7(MATERIAL)	-	100	-
Cl. No.8.1, Table no. 1(i),a("Tear strength, (other than moulded upper material) ")	-	500	-
Cl. No.8.1, Table no. 1(i),b("For all moulded upper material ")	-	1500	-
Cl. No.8.1, Table no. 1(ii)(Flexing endurance)	-	1500	-
Cl. No.8.2,Table no. 2(i)(Tear strength)	-	500	-
Cl. No.8.2,Table no. 2(ii),a("Abrasion resistance- At dry condition")	-	1350	-
Cl. No.8.2,Table no. 2(ii),b("Abrasion resistance- At wet condition")	-	1350	-
Cl. No.8.3,Table no. 3(i)(Tear strength)	-	500	-
Cl. No.8.3,Table no. 3(ii),a("Abrasion resistance- At dry condition")	-	1350	-
Cl. No.8.3,Table no. 3(ii),b("Abrasion resistance- At wet condition")	-	1350	-
Cl. No.8.4,Table no. 4(i)(Grain crack index)	-	900	-
Cl. No.8.4,Table no. 4(ii)(Density)	-	300	-
Cl. No.8.4,Table no. 4(iii)(Abrasion resistance)	-	1350	-
Cl. No.8.4,Table no. 5(i)(Density)	-	300	-
Cl. No.8.4,Table no. 5(ii)("Abrasion resistance, Volume loss ")	-	1080	-
Cl. No.8.4, Table no. 5(iii)("Flexing resistance, At 30 000 flexes")	-	1350	-
Cl. No.8.5, Table no. 6(i)("Bond strength, N/mm, Min (Applicable when fore part is fully covered or strap width is more than 25 mm)")	-	1080	-
Cl. No.8.5, Table no. 6(ii)("Toe post attachment strength, N, Min (Applicable if toe post is present)")	-	800	-
Cl. No.8.5, Table no. 6(iii)("Toe ring attachment strength, Min (Applicable if toe ring is not integral part of upper")	-	800	-
Cl. No.8.5, Table no. 6(iv)(Strap to outsole strength)	-	800	-
Cl. No.8.5, Table no. 6(v)("Attachment strength of back strap and Buckle/D-ring ")	-	800	-
Cl. No.8.5, Table no. 6(vi)("Attachment strength of elastic, limit of useful extension, percent")	-	800	-
Cl. No.8.5, Table no. 6(vii)("Attachment strength of back strap and velcro, N, Min (If, present)")	-	800	-
Cl. No.8.5, Table no. 6(viii)("Hydrolysis resistance, Cut growth after 150 000 flexes, mm, Max (Applicable for PU sole only)")	-	2700	-
Cl. No.8.5, Table no. 6(ix)("Heel pull off strength, N, Min (Applicable for heel height 40 mm and above attached separately to the sandal/slipper)")	-	1200	-
Cl. No.8.5, Table no. 6(x)("Inter layer bond strength, N/mm, (Applicable for multi-layer sole)")	-	1080	-
Cl. No.8.5, Table no. 6(xi)("Slip Resistance, Coefficient of Friction (COF) (Not applicable for leather sole) (To be carried out on quarry tiles)")	-	2500	-
Cl. No.8.("Requirement of Complete Sandal and Slipper (Chemical Requirements) ")	-	35000	WITH CHEMICAL TEST 47000, WITHOUT 12000 10% DISCOUNT TO BIS
Cl. No.9.(MARKING AND PACKING)	-	180	-
Cl. No.8.6.1,Table 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	4500	-
Cl. No.8.6.1,Table 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3700	-
Cl. No.8.6.1,Table 1 of IS 17011(iv)(Chromium (VI))	-	2100	-
Cl. No.8.6.1,Table 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	5000	-
Cl. No.8.6.1,Table 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	2500	-
Cl. No.8.6.1,Table 1 of IS 17011(vii)(Formaldehyde)	-	2500	-
Cl. No.8.6.1,Table 1 of IS 17011(viii)(Organotin compounds)	-	7000	-
Cl. No.8.6.1,Table 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	4500	-
Cl. No.8.6.1,Table 1 of IS 17011(x)(pH)	-	500	-
Cl. No.8.6.1,Table 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	6000	-
Cl. No.8.6.1,Table 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	3500	-
Cl. No.8.6.2(Lead content)	-	2000	-
Cl-5 ((Amendment No-1)(Category And Type)	-	0	-
Cl.8 Table-1 S.No 1, (i) (Amendment No-1)(Bond strength , N/mm, Min)	-	1080	-
Cl.8 Table-1 S.No 1, (ii) (Amendment No-1)(Toe post attachment strength)	-	800	-
Cl.8 Table-1 S.No 1, (iii) (Amendment No-1)(Toe ring attachment strength)	-	800	-
Cl.8 Table-1 S.No 1, (iv) (Amendment No-1)(Strap to outsole strength N, Min)	-	800	-
Cl.8 Table-1 S.No 1, (v) (Amendment No-1)(Attachment strength of back strap and buckle/D-ring N, Min)	-	800	-
Cl.8 Table-1 S.No 1, (vi) (Amendment No-1)(Limit of useful extension, percent, Min)	-	1000	-
Cl.8 Table-1 S.No 1, (vii) (Amendment No-1)(Attachment strength of back strap and velcro, N, Mi)	-	800	-
Cl.8 Table-1 S.No 1, (viii) (Amendment No-1)(Hydrolysis resistance)	-	2700	-
Cl.8 Table-1 S.No 1, (ix) (Amendment No-1)(Heel pull off strength)	-	1200	-
Cl.8 Table-1 S.No 1, (x) (Amendment No-1)(Inter layer bond strength)	-	1080	-
Cl.8 Table-1 S.No 1, (xi) (Amendment No-1)(Slip resistance, coefficient of friction (COF)3)	-	2500	-
Cl.8 Table-1 S.No 1, (xii) (Amendment No-1)(Abrasion resistance, (volume loss) mm3 , Max)	-	1080	-
Cl.8 Table-1 S.No 1, (xiii) (Amendment No-1)("Flexing resistance (Belt method or Bennewart flex method)")	-	1080	-
Cl.8 Table-1 S.No 1, (xiv) (Amendment No-1)(Chemical Requirements)	-	30000	-
Cl.8 Table-1 S.No 1, (xv) (Amendment No-1)(Lead content (as Pb)7 ppm)	-	650	-
Cl.9 Table-2 S.No 1, (i) a (Amendment No-1)(Tear strength for other than moulded upper material)	-	500	-
Cl.9 Table-2 S.No 1, (ii) (Amendment No-1)(Flexing endurance)	-	1500	-
Cl.9 Table-3 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	500	-
Cl.9 Table-3 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	1080	-
Cl.9 Table-4 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	500	-
Cl.9 Table-4 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	1080	-
Cl.9 Table-5 S.No 1, (i) (Amendment No-1)(Grain crack index)	-	900	-
Cl.9 Table-5 S.No 1, (ii) (Amendment No-1)(Density, g/cm3 , Min)	-	300	-
Cl.9 Table-5 S.No 1, (iii) (Amendment No-1)(Abrasion resistance, mm/kcs)	-	1350	-
Cl.9 Table-6 S.No 1, (i) (Amendment No-1)("Density, g/cm3 , Min (a)-Cellular, (b) Solid ")	-	300	-
Cl-10 (Amendment No-1)(Marking)	-	150	-

19 Jul, 2027

-
-

IS 10702 (2023)

Hawai Chappal-Specification

42000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Material)	-	180	-
4.2(Length)	-	180	-
4.3(Thickness)	-	180	-
4.4 , Table No. 1 , i)(Density)	-	300	-
4.4 , Table No. 1 , ii)(2Compression set at constant stress)	-	1000	-
4.4 , Table No. 1 , iii)(3Split tear strength)	-	500	-
4.4 , Table No. 1 , iv)("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber")	-	2000	-
4.4 , Table No. 1 , v)(5Abrasion resistance at applied force)	-	1080	-
4.4 , Table No. 1 , vi)(Flexing resistance: Maximum cut growth at 50 000 flexes)	-	1500	-
4.4 , Table No. 1 , vii)(7 Hydrolysis resistance, Maximum cut growth at 50 000 flexes)	-	2700	-
4.4 , Table No . 2 , i)(Density , Solid strap, Cellular strap)	-	300	-
4.4 , Table No . 2 , ii)("Breaking strength , Strap to strap and Toe portion to strap , Elongation at break")	-	500	-
4.4 , Table No . 2 , iii)(Minimum cross section of the stud)	-	180	-
4.4 , Table No . 2 , iv)(Stud bolt)	-	180	-
4.4 , Table No . 3 , i)(Toe post attachment strength)	-	800	-
4.4 , Table No . 3 , ii)(Attachment strength of rear strap)	-	800	-
4.4 , Table No . 3 , iii)(Inter layer bond strength)	-	1080	-
5(CHEMICAL REQUIREMENT FOR HAWAI CHAPPAL)	-	35000	WITHOUT CHEMICAL 7000 10% DISCOUNT TO BIS
6(MARKING AND PACKING)	-	150	-
Cl-4 ((Amendment No-1)(Category And Type)	-	0	-
Cl-4.4, Table -1 S. No-1 (i) (Amendment No-1)(Compression set at constant stress)	-	1000	-
Cl-4.4, Table -1 S. No-1 (ii) (Amendment No-1)(Split tear strength)	-	500	-
Cl-4.4, Table -1 S. No-1 (iii) (a)(Amendment No-1)("Shrinkage at Shrinkage at 50 °C ± 1 °C for 2 h for polymeric material, percent, Max ")	-	2000	-
Cl-4.4, Table -1 S. No-1 (iii)(b) (Amendment No-1)(Shrinkage at 100 °C ± 1 °C for 1 h for rubber, percent, Max)	-	1000	-
Cl-4.4, Table -1 S. No-1 (iv) (Amendment No-1)(Abrasion resistance at applied force)	-	1080	-
Cl-4.4, Table -1 S. No-1 (v) (Amendment No-1)(Flexing resistance: Maximum cut growth,)	-	1500	-
Cl-4.4, Table -1 S. No-1 (vi) (Amendment No-1)(Hydrolysis resistance:Maximum cut growth)	-	2700	-
Cl-4.4, Table -1 S. No-1 (vii) (Amendment No-1)(Chemical requirements)	-	30000	-
Cl-4.4, Table -1 S. No-1 (viii) (Amendment No-1)("Lead content (as Pb), ppm, Max")	-	650	-
Cl-4.4, Table -2 S. No-1 (i), a (Amendment No-1)("Breaking strength for Strap to strap 1-Solid strap 2-Cellular strap")	-	250	-
Cl-4.4, Table -2 S. No-1 (i), b (Amendment No-1)("Breaking strength for Toe portion to strap 1-Solid strap 2-Cellular strap")	-	250	-
Cl-4.4, Table -2 S. No-1 (i), c (Amendment No-1)("Elongation at break , percent, Min 1-Solid strap 2-Cellular strap")	-	250	-
Cl-4.4, Table -2 S. No-1 (ii), (Amendment No-1)(Chemical requirements)	-	30000	-
Cl-4.4, Table -2 S. No-1 (iii), (Amendment No-1)(Lead content (as Pb), in ppm, Max)	-	650	-
Cl-4.4, Table -3 S. No-1 (i), (Amendment No-1)(Toe post attachment strength)	-	800	-
Cl-4.4, Table -3 S. No-1 (ii), (Amendment No-1)(Attachment strength of rear strap)	-	800	-
Cl-4.4, Table -3 S. No-1 (iii), (Amendment No-1)(Inter layer bond strength)	-	1080	-

19 Jul, 2027

-
-

IS 17043 : Part 1 (2024)

Shoes - Specification Part 1 Shoes for Services

42000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.2(Design)	-	100	-
Cl-4.3.1(Size)	-	100	-
Cl-4.3.2(Weight)	-	150	-
Cl-4.4(Height of Upper)	-	180	-
Cl-4.5, S.Cl-4.5.2(Ergonomic Feature)	-	300	-
Cl-4.5, S.Cl-4.5.3(Bond Strength)	-	1080	-
Cl-4.5, S.Cl-4.5.4(Slip Resistance)	-	2500	-
Cl-4.5.5.1(Electrical Properties-Antistatic footwear)	-	3000	-
Cl-4.5, S.Cl-4.5.6(Heat Insulation of Sole Complex)	-	900	-
Cl-4.5, S.Cl-4.5.7(Cold Insulation of Sole Complex)	-	900	-
Cl-4.6.1(Material)	-	100	-
Cl-4.6.2(Tear Strength)	-	500	-
Cl-4.6.3(Water Vapour Permeability and Coefficient)	-	630	-
Cl-4.6.4(Water Penetration and Water Absorption)	-	630	-
Cl-4.7.1(Material)	-	100	-
Cl-4.7.2(Tear Strength)	-	500	-
Cl-4.7.3(Abrasion Resistance)	-	1080	-
Cl-4.7.4(Water Vapour Permeability and Coefficient)	-	630	-
Cl. 4.8.1(Material)	-	100	-
Cl-4.8.2(Abrasion Resistance)	-	800	-
Cl-4.8.3(Water Absorption and Desorption)	-	630	-
Cl-4.9.3(Abrasion Resistance)	-	1080	-
Cl-4.10(Toe Puff and Counter Stiffener)	-	280	-
Cl-4.11.1(Material)	-	100	-
Cl-4.11.2(Tear Strength)	-	500	-
Cl-4.12(Closing Thread)	-	100	-
Cl-4.13.2(Thickness)	-	100	-
Cl-4.13.3(Moulded Density)	-	300	-
Cl-4.13.4(Hardness)	-	600	-
Cl-4.13.5(Ageing Test)	-	2000	-
Cl-4.13.6(Tear Strength)	-	500	-
Cl-4.13.7(Abrasion Resistance)	-	1080	-
Cl-4.13.8(Flexing Resistance)	-	1080	-
Cl-4.14(Eyelet)	-	100	-
Cl-4.15.2(Breaking Load and Tag Retention)	-	500	-
Cl-5(Chemical Requirements)	-	30000	-
Cl-7(Marking)	-	150	-
Cl.4.5.8(Energy Absorption of Seat Region)	-	630	-
Cl- 4.5.3.1(Upper-outsole bond strength)	-	1080	-
Cl.4.5.3.2(Interlayer bond strength)	-	1080	-
Cl-4.2(Design)	-	100	-
Cl-4.3.1(Size)	-	100	-
Cl-4.3.2(Weight)	-	150	-
Cl-4.4(Height of Upper)	-	180	-
Cl-4.5, S.Cl-4.5.2(Ergonomic Feature)	-	300	-
Cl-4.5, S.Cl-4.5.3(Bond Strength)	-	1080	-
Cl-4.5, S.Cl-4.5.4(Slip Resistance)	-	2500	-
Cl-4.5.5.1(Electrical Properties-Antistatic footwear)	-	3000	-
Cl-4.5, S.Cl-4.5.6(Heat Insulation of Sole Complex)	-	900	-
Cl-4.5, S.Cl-4.5.7(Cold Insulation of Sole Complex)	-	900	-
Cl-4.6.1(Material)	-	100	-
Cl-4.6.2(Tear Strength)	-	500	-
Cl-4.6.3(Water Vapour Permeability and Coefficient)	-	630	-
Cl-4.6.4(Water Penetration and Water Absorption)	-	630	-
Cl-4.7.1(Material)	-	100	-
Cl-4.7.2(Tear Strength)	-	500	-
Cl-4.7.3(Abrasion Resistance)	-	1080	-
Cl-4.7.4(Water Vapour Permeability and Coefficient)	-	630	-
Cl. 4.8.1(Material)	-	100	-
Cl-4.8.2(Abrasion Resistance)	-	1080	-
Cl-4.8.3(Water Absorption and Desorption)	-	630	-
Cl-4.9.3(Abrasion Resistance)	-	1080	-
Cl-4.10(Toe Puff and Counter Stiffener)	-	280	-
Cl-4.11.1(Material)	-	100	-
Cl-4.11.2(Tear Strength)	-	500	-
Cl-4.12(Closing Thread)	-	100	-
Cl-4.13.2(Thickness)	-	100	-
Cl-4.13.3(Moulded Density)	-	300	-
Cl-4.13.4(Hardness)	-	600	-
Cl-4.13.5(Ageing Test)	-	2000	-
Cl-4.13.6(Tear Strength)	-	500	-
Cl-4.13.7(Abrasion Resistance)	-	1080	-
Cl-4.13.8(Flexing Resistance)	-	1080	-
Cl-4.14(Eyelet)	-	100	-
Cl-4.15.2(Breaking Load and Tag Retention)	-	500	-
Cl-5(Chemical Requirements)	-	30000	-
Cl-7(Marking)	-	150	-
Cl.4.5.8(Energy Absorption of Seat Region)	-	630	-
Cl- 4.5.3.1(Upper-outsole bond strength)	-	1080	-
Cl.4.5.3.2(Interlayer bond strength)	-	1080	-
Cl-4.9.1(Material)	-	100	-
Cl-4.9.2(Water Absorption and Desorption)	-	630	-
Cl-4.13.1(Material)	-	100	-
Cl-4.4(Height of Upper)	-	150	-
Cl-4.6.3(Water Vapour Permeability and Coefficient)	-	800	-
Cl-4.6.4(Water Penetration and Water Absorption)	-	800	-
Cl-4.7.4(Water Vapour Permeability and Coefficient)	-	800	-
Cl-4.8.2(Abrasion Resistance)	-	800	-
Cl-4.8.3(Water Absorption and Desorption)	-	800	-
Cl-7(Marking)	-	100	-
Cl-4.9.1(Material)	-	100	-
Cl-4.9.2(Water Absorption and Desorption)	-	1080	-
Cl-4.13.1(Material)	-	100	-

19 Jul, 2027

-
-

IS 13893 (1994)

Polyurethane soles semirigid - specification

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3.2(Ageing test)	-	2700	-
4.3(Ross Flex test)	-	2000	-
4.3(Flexural strength )	-	2000	-
4.3(Abrasion Resistance)	-	1080	-
4.3(Elongation at break)	-	500	-
4.3(Tensile Strength )	-	500	-
4.3(Hardness Shore(A))	-	300	-
4.3(Relative density )	-	300	-
4.2(Thickness )	-	180	-
4.1(Design)	-	150	-
Cl.5, 5.1, 5.2(Packing And Marking)	-	180	-
4.2 (Amendment 2)(Thickness)	-	100	-
4.3.1 Table 1 i) (Amendment 2)(Relative Density)	-	300	-
4.3.1 Table 1 iii) (Amendment 2)(Abrasion Resistance at applied force of 10 N)	-	1080	-
4.3.1 Table 1 iv) (Amendment 2)(Flexing Resistance, Bennewart method)	-	1080	-
4.3.1 Table 1 v) (Amendment 2)(Hydrolysis Resistance, cut growth after 150000 flexes)	-	2700	-
4.3.1 Table 1 vi) (Amendment 2)(Tensile Strength)	-	250	-
4.3.1 Table 1 vii) (Amendment 2)(Elongation at break)	-	250	-
4.3.1 Table 1 viii) (Amendment 2)(Tear Strength (average force))	-	500	-
4.3.1 Table 1 ii) (Amendment 2)(Hardness, degree, Shore A)	-	600	-

19 Jul, 2027

-
-

IS 5676 (1995)

Moulded solid rubber soles and heels - SpecificatlOn (Second Revision)

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5/5.1(REQUIREMENTS-General)	-	100	-
5/5.5- Table1(REQUIREMENTS-Thickness)	-	180	-
6(Marking and packing)	-	180	-
5/5.7- Table2(REQUIREMENTS- Physical Requirements- as per IS 3400 (Part 1, Part 2, Part 4, Part 9, Part 10, Part 16))	-	4000	-
Cl.6.1,6.2,6.3(Marking and packing)	-	180	-
5/5.2- Fig. 1 to 5(REQUIREMENTS-Design)	-	100	-
5/5.3/5.3.1(REQUIREMENTS- Construction)	-	150	-
5/5.6/5.6.1(REQUIREMENTS-Channel)	-	100	-
8.3(Measurement of thickness)	-	180	-
5.5 (Amendment 1)(Thickness)	-	180	-
5.7 Table 2 i) (Amendment 1)(Relative Density)	-	300	-
5.7, Table 2 ii) (Amendment 1)(Hardness, degree, Shore A)	-	600	-
5.7, Table 2 iv) (Amendment 1)(Abrasion Resistance at applied force of 10 N)	-	1080	-
5.7, Table 2 v) (Amendment 1)(Tensile strength)	-	250	-
5.7, Table 2 vi) (Amendment 1)(Elongation at break)	-	250	-
5.7, Table 2 vii) (Amendment 1)(Tear strength (average force))	-	500	-
5.7, Table 2 iii) (Amendment 1)(Flexing resistance)	-	1080	-

19 Jul, 2027

-
-

IS 374 (2019)

Specification for electric ceiling type fans and regulators (Third Revision)

Upto and including 250V supply for Household and simila

26250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	500	10% discount on BIS samples
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	500	10% discount on BIS samples
8.1,a(Marking )	-	500	10% discount on BIS samples
8.1,b(Marking )	-	500	10% discount on BIS samples
8.1,c(Marking )	-	500	10% discount on BIS samples
8.1,d(Marking )	-	500	10% discount on BIS samples
8.1,e(Marking )	-	500	10% discount on BIS samples
8.1,f(Marking )	-	500	10% discount on BIS samples
8.1,g(Marking )	-	500	10% discount on BIS samples
8.2(Marking )	-	500	10% discount on BIS samples
8.3,a(Marking )	-	500	10% discount on BIS samples
8.3,b(Marking )	-	500	10% discount on BIS samples
8.3,c(Marking )	-	500	10% discount on BIS samples
8.3,d(Marking )	-	500	10% discount on BIS samples
8.3,e(Marking )	-	500	10% discount on BIS samples
8.4(Marking )	-	500	10% discount on BIS samples
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	500	10% discount on BIS samples
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	500	10% discount on BIS samples
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	500	10% discount on BIS samples
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	500	10% discount on BIS samples
6.2(Rating)	-	500	10% discount on BIS samples
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	5000	10% discount on BIS samples
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	5000	10% discount on BIS samples
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	2000	10% discount on BIS samples
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	2000	10% discount on BIS samples
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	1000	10% discount on BIS samples
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	1000	10% discount on BIS samples
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
10.1(Speed Regulators)	-	2000	10% discount on BIS samples
10.2(Speed Regulators)	-	2000	10% discount on BIS samples
10.3(Speed Regulators)	-	2000	10% discount on BIS samples
10.4(Speed Regulators)	-	2000	10% discount on BIS samples
10.5(Speed Regulators)	-	2000	10% discount on BIS samples
10.6(Speed Regulators)	-	2000	10% discount on BIS samples
10.7(Speed Regulators)	-	2000	10% discount on BIS samples
10.8(Speed Regulators)	-	2000	10% discount on BIS samples
11.1(Starting)	-	2000	10% discount on BIS samples
11.2(Starting)	-	2000	10% discount on BIS samples
12(Interchangeability)	-	2000	10% discount on BIS samples
13(Silent Operation)	-	5000	10% discount on BIS samples
14.3 & Table 1(Test for Air Performance)	-	5000	10% discount on BIS samples
14.4(Measurement of Speed of the Fan )	-	4000	10% discount on BIS samples
14.5(Measurement of Power factor and Power Input)	-	4000	10% discount on BIS samples
16(Endurance Test)	-	5000	10% discount on BIS samples
17(Test for Harmonic Distortion)	-	4000	10% discount on BIS samples
4(GENERAL REQUIREMENTS)	-	1000	-
5(GENERAL NOTES ON TESTS)	-	1000	-
15.1, 15.2(Air delivery and service value)	-	12000	-

19 Jul, 2027

-
-

IS 17043 (2018)

Derby shoes - Specification

54000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Innocuosness test IS 17011)	-	35000	Innocuosness test price: 35000; without Innocuosness 19000 per sample 10% discount to BIS
4.15.2(Breaking load & tag retention)	-	500	-
4.15.1(Length of laces )	-	100	-
4.14(Eyelet pull out test)	-	100	-
4.13.8(Flex resistance )	-	1080	-
4.13.7(Abrasion resistance )	-	1080	-
4.13.6(Tear Strength)	-	800	-
4.13.5(Ageing test)	-	500	-
4.13.4(Hardness (IRHD))	-	2000	-
4.13.3(Density )	-	300	-
4.13.2(Thickness )	-	180	-
4.13.1(Meterial)	-	180	-
4.12(Breaking Strength of thread)	-	800	-
4.11.2(Tear Strength)	-	500	-
4.11.1(Thickness )	-	180	-
4.10(Toe Puff & counter stiffener thickness )	-	180	-
4.9.3(Abrasion resistance )	-	800	-
4.9.2(Water absorption & desorption )	-	630	-
4.9.1(Thickness )	-	180	-
4.8.3(Water absorption & desorption )	-	630	-
4.8.2(Abrasion )	-	800	-
4.8.1(Thickness )	-	180	-
4.7.4(Water vapour permeability & coefficent )	-	630	-
4.7.3(Abrasion resistance )	-	800	-
4.7.2(Tear Strength)	-	500	-
4.7.1(Thickness )	-	180	-
4.6.4(Water penetration and water absorption)	-	630	-
4.6.3(Water vapour permeability & coefficent )	-	630	-
4.6.2(Tear Strength)	-	500	-
4.6.1(Thickness )	-	180	-
4.5.8(Energy absorption of seat region )	-	630	-
4.5.7(Cold insulation tester )	-	900	-
4.5.6(Heat insulation of sole complex)	-	900	-
4.5.5.1(Electrical Properties Antistatic )	-	3000	-
4.5.4(Slip Resitance)	-	2500	-
4.5.3.2(Interayer bond strength)	-	1080	-
4.5.3.1(Upper/outsole bond strength)	-	1080	-
4.5.2(Ergonomic Feature)	-	300	-
4.5.1(Contruction)	-	100	-
4.4(Height of upper )	-	180	-
4.3.2(Weight)	-	180	-
4.3.1(Size)	-	180	-
4.2(Design )	-	180	-
4.1(General)	-	180	-
7(Marking)	-	150	-

19 Jul, 2027

-
-

IS 16994 (2018)

Footwear for Men and Women for Municipal Scavenging Work

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.6(Leak Proof test)	-	900	.
8.4(Volatility & lead content )	-	800	.
8.3(Compression Resistance)	-	630	.
8.3(Impact resistance )	-	630	.
8.2(Internal Toe cap length)	-	180	.
8.1(Height of upper )	-	1080	.
8.0(Construction)	-	180	.
7.10(Ageing test)	-	2000	.
7.9(Hydrolysis)	-	2700	.
7.8(Insocks Material )	-	100	.
7.7.5(Upper / Outsole bond strength)	-	1080	.
7.7.4(Interlayer Bond Strength )	-	1080	.
7.7.3(Flexing Resistance )	-	1080	.
7.7.2(Abrasion Resistance)	-	1080	.
7.7.1(Tear Strength )	-	500	.
7.7(Hardness (IRHD))	-	300	.
7.7(Thickness)	-	180	.
7.7(Density )	-	300	.
7.6(Peel Strength )	-	1080	.
7.6(Shape retention)	-	800	.
7.6(Moisture )	-	800	.
7.6(Resilience test )	-	800	.
7.6(1st Dry collapsing load, hardness)	-	800	.
7.5(Insocks )	-	800	.
7.5(Insoles )	-	1350	.
7.5(Water abrasion & desorption)	-	630	.
7.5(Thickness )	-	180	.
7.4(Tensile Strength )	-	500	.
7.4(Abrasion Resistance)	-	1350	.
7.4(Tear Strength )	-	500	.
7.3(Flexing Resistance )	-	1500	.
7.3(Tensile Strength )	-	500	.
7.3(Thickness )	-	180	.
7.3(Water Vapour permeability & coefficient )	-	700	.
7.3(Tear Strength )	-	1080	.
7.1(Compression Tester)	-	630	.
7.1(Impact resistance)	-	630	.

19 Jul, 2027

-
-

IS 17037 (2018)

Anti riot shoes - Specification

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Innocuosness test IS 17011)	-	35000	WITHOUT INNOCOUSNESS 25000 10% DISCOUNT TO BIS
4.16.2(Breaking load & lag retention)	-	1080	-
4.16.1(Length of laces )	-	180	-
4.15(D-ring and Hooks )	-	180	-
4.14.10(Resistance to fuel oil)	-	900	-
4.14.9(Resistance to hot contact)	-	800	-
4.14.8(Flex resistance)	-	2000	-
4.14.7(Abrasion resistance)	-	1080	-
4.14.6(Tear Strength)	-	500	-
4.14.5(Ageing test)	-	2000	-
4.14.4(Hardness (IRHD))	-	1500	-
4.14.3(Density )	-	180	-
4.14.2(Thickness )	-	180	-
4.14.1(Meterial)	-	180	-
4.13(Breaking Strength of thread)	-	180	-
4.12.2(Tear Strength)	-	500	-
4.12.1(Thickness )	-	180	-
4.11.2(Tear Strength)	-	500	-
4.11.1(Thickness)	-	180	-
4.10(Counter stiffener thickness)	-	100	-
4.9.3(Water absorption & desorption )	-	630	-
4.9.2(Abrasion resistance )	-	800	-

19 Jul, 2027

-
-

IS 17012 (2018)

High ankle tactical boots with pu - Rubber sole - Specification

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Innocuousness Test IS 17011)	-	35000	WITH INNCOUSNESS TEST 60000, WITHOUT 25000 PER SAMPLE 10% DISCOUNT TO BIS
4.16.2(Breaking Strength of lace )	-	430	-
4.16.1(Length of lace )	-	180	-
4.15(D-ring & Hooks )	-	180	-
6.1(Resistance to Fuel Oil)	-	1500	-
4.14.9(Resistance to hot contact )	-	1500	-
4.14.8(Flexing resistance )	-	900	-
4.14.7(Ageing test)	-	2500	-
4.14.6(Hardness (IRHD))	-	1080	-
4.14.5(Abrasion resistance )	-	900	-
4.14.4(Tear Strength)	-	630	-
4.14.3(Sole Density )	-	180	-
4.14.2(Thickness)	-	180	-
4.14.1(Meterial)	-	180	-
4.13(Breaking Strength of thread )	-	180	-
4.12.2(Tear Strength)	-	630	-
4.12.1(Thickness )	-	180	-
4.11.2(Tear Strength)	-	630	-
4.11.1(Thickness )	-	180	-
4.10.3(Water absorption & desorption percent)	-	2500	-
4.10.2(Abrasion resistance )	-	630	-
4.10.1(Meterial )	-	180	-
4.9.3(Water absorption & desorption percent)	-	2500	-
4.9.2(Abrasion resistance )	-	630	-
4.9.1(Thickness)	-	180	-
4.8(Thickness Toe puff & counter stiffener)	-	180	-
4.7.5(Water Vapour permeability & coefficient )	-	1080	-
4.7.4(Abrasion resistance )	-	630	-
4.7.3(Tear Strength)	-	900	-
4.7.2(Meterial Counter & Toungue)	-	180	-
4.7.1(Meterial vamp & Quarter)	-	180	-
4.6.3(Water Penetration and water absorption )	-	1080	-
4.6.2(Tear Strength)	-	630	-
4.6.1(Thickness )	-	180	-
4.5.8(Energy absorption of seat region )	-	630	-
4.5.7(Cold Insulation of sole complex)	-	900	-
4.5.6(Heat Insulation of sole Complex)	-	900	-
4.5.5(Antistatic test)	-	3000	-
4.5.4(Slip Resitance)	-	2500	-
4.5.3.2(Interayer bond strength)	-	1080	-
4.5.3.1(Upper/outsole bond strength)	-	1080	-
4.5.2(Ergonomic Feature)	-	300	-
4.5.1(Contruction)	-	180	-
4.4(Height of upper )	-	180	-
4.3.2(Weight)	-	180	-
4.3.1(Size)	-	180	-
4.2(Design )	-	180	-

19 Jul, 2027

-
-

IS 15298 : part 4 (2017)

Personal protective equipment: Part 4 occupational footwear (Second Revision)

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 1(CLASS I)	-	180	-
Table 1(CLASS II)	-	180	-
5.2.2.1(General)	-	180	-
5.2.2.2(Height of upper)	-	180	-
5.2.2.3(Seat region)	-	180	-
5.3.2.1(Construction)	-	180	-
5.3.1.2(Upper/outsole bond strength)	-	1080	-
5.3.2.2(Leakproofness)	-	900	-
5.3.2.3(Specific ergonomic features )	-	300	-
5.3.4.1(Slip resistance)	-	2500	-
5.3.4.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (SLS) solution)	-	2500	-
5.3.4.3(Slip resistance on steel floor with glycerine )	-	2500	-
5.3.4.4(Slip resistance on ceramic tile floor with SLS and on steel floor with glycerine )	-	2500	-
5.3.2.5(Innocuousness )	-	35000	WITH INNCOUUSNESS TOTAL TESTING CHARGE= 60,000 OTHERWISE 25,000 PER SAMPLE 10% Discount for BIS
5.4.2.1(Upper)	-	180	-
5.4.2.2(Thickness )	-	180	-
5.4.2.3(Tear strenth)	-	180	-
5.4.2.4(Tensile properties)	-	500	-
5.4.2.5(Flexing resistance )	-	1500	-
5.4.2.6(Water vapour permeability and coefficient )	-	630	-
5.4.2.7(pH value )	-	300	-
5.4.2.8(Hydrolysis)	-	2700	-
5.4.2.9(Chromium VI content )	-	1350	-
5.5.2.1(Tear strength )	-	500	-
5.5.2.2(Abrasion resistance )	-	1350	-
5.5.2.3(Water vapour permeability and coefficient )	-	630	-
5.5.2.4(pH value )	-	300	-
5.5.2.5(Chromium VI content )	-	1350	-
5.6(Tongue )	-	2000	-
5.6.2.1(Tear strength )	-	500	-
5.6.2.2(pH value )	-	300	-
5.6.2.3(Chromium VI content )	-	1350	-
5.7.2.1(Insole and insock )	-	500	-
5.7.2.2(Insole and insock )	-	500	-
5.7.2.3(Water absorption and desorption )	-	630	-
5.7.4.1(Abrasion resistance )	-	800	-
5.7.4.2(Abrasion resistance )	-	1350	-
5.7.2.5(Chromium VI content )	-	1350	-
5.8.2.1(Outsole)	-	1000	-
5.8.1.1(Thickness )	-	180	-
5.8.1.2(Cleated area )	-	180	-
5.8.1.3(Cleat height)	-	180	-
5.8.2.2(Tear strength )	-	500	-
5.8.2.3(Abrasion resistance )	-	1080	-
5.8.2.4(Flexing resistance )	-	1080	-
5.8.2.5(Hydrolysis )	-	2700	-
5.8.2.6(Interlayer bond strength )	-	1080	-
6.2.1.1(Metallic anti-penetration insert )	-	630	-
6.2.1.1.2(Non-metallic anti-penetration insert used as an insole)	-	630	-
6.2.1.2(Construction)	-	180	-
6.2.1.3(Dimensions )	-	450	-
6.2.1.4(Flex resistance of penetration-resistant inserts )	-	2000	-
6.2.1.5.1(Corrosion resistance of penetration-resistant metallic inserts)	-	900	-
6.2.1.5.2(Penetration-resistant non-metallic inserts)	-	6000	-
6.2.2.1(Conductive footwear)	-	3000	-
6.2.2.3(Electrically insulating footwear )	-	3000	-
6.2.2.2(Antistatic footwear)	-	3000	-
6.2.3.1(Heat insulation of sole complex )	-	900	-
6.2.3.2(Cold insulation of sole complex)	-	900	-
6.2.2.4(Energy absorption of seat region )	-	630	-
6.2.2.5(Water resistance )	-	1500	-
6.2.2.6(Ankle protection)	-	1000	-
6.2.7.1(Cut resistance foot wear)	-	3300	-
6.2.7.4(Pentration resistance)	-	630	-
6.3.2.2(Upper- water penetration)	-	630	-
6.4.2.1(Resistance to hot contact)	-	800	-
6.4.2.2(Resistance to fuel oil)	-	900	-
7(a)(Marking)	-	180	-

19 Jul, 2027

-
-

IS 15644 (2006)

Safety of electric toys

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.0(Marking and instructions)	-	1000	-
8.0(Power Input)	-	3000	-
9.0(Heating and abnormal operation)	-	3000	-
10.0(Electrical strength at operating temperature)	-	2000	-
11.1(Moisture resistance)	-	2500	-
11.2(Resistant to humidity)	-	2500	-
12.0(Electric strength at room temperature)	-	2000	-
13.0(Mechanical strength)	-	1000	-
14.1(Construction)	-	500	-
14.2(Construction)	-	500	-
14.3(Construction)	-	500	-
14.4(Construction)	-	500	-
14.5(Construction)	-	500	-
14.6(Construction)	-	500	-
14.7(Construction)	-	500	-
14.8(Construction)	-	500	-
14.9(Construction)	-	500	-
14.1(Construction)	-	500	-
14.11(Construction)	-	500	-
14.12(Construction)	-	500	-
14.13(Construction)	-	500	-
14.14(Construction)	-	500	-
15.1(Protection of cords and wires)	-	500	-
15.2(Protection of cords and wires)	-	500	-
16.0(Components)	-	2000	-
17 Table-1(Screws and connections)	-	1000	-
17 Table-1(Nominal daimeter of screws made of insulating material)	-	1000	-
18.0(Clearance and creepage distance)	-	1000	-
19.1(Ball pressure test IEC 60695-10-2)	-	500	-
19.2.1(Glow wire test IEC 60695-2-11)	-	500	-
19.2.2(Needle flame test)	-	1000	-
20.0(Radiation, toxicity and similar hazards)	-	2000	-
14.15(Construction)	-	500	-
14.16(Construction)	-	500	-
9873 (Part-9) 3(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	5000	-
9873 (Part-9) 3(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	5000	-
9873 (Part-9) 3(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	5000	-
9873 (Part-9) 3(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	5000	-
9873 (Part-3) 4.1 - Table 1(Selenium (Se) - Cl 7,8,9 )	-	3000	-
9873 (Part-3) 4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 )	-	3000	-
9873 (Part-3) 4.1 - Table 1(Lead (Pb) - Cl 7,8,9 )	-	3000	-
9873 (Part-3) 4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 )	-	3000	-
9873 (Part-3) 4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9)	-	3000	-
9873 (Part-3) 4.1 - Table 1(Barium (Ba) - Cl 7,8,9 )	-	3000	-
9873 (Part-3) 4.1 - Table 1(Arsenic (As) - Cl 7,8,9 )	-	3000	-
9873 (Part-3) 4.1 - Table 1(Antimony (Sb) - Cl 7,8,9)	-	3000	-

19 Jul, 2027

-
-

1
2
3
Next
Last

Bureau of Indian Standards

The National Standards Body of India

EMC Testing and Compliance LLP

115, Pace City-1, Sector 37, Gurugram, Gurugram, Haryana, 122001

8130427070 info@emclab.co.in

Scope List