BIS - LIMS (Laboratory Information Management System)

EMC Testing and Compliance LLP, Gurugram

115, Pace City-1, Sector 37, Gurugram, Gurugram, Haryana, 122001

8130427070 info@emclab.co.in

Scope List

Reset

151 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 251 (2024)

SODA ASH, TECHNICAL â SPECIFICATION (fifth revision)

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1("Description ( IS 251 : 2024 )")	-	1000	-
4.2("Bulk Density ( IS 251 : 2024 )")	-	1000	-
4.3("Volatile Matter Content ( IS 251 : 2024 )")	-	1000	-
4.4("Sieve Analysis of Dense Grade Soda Ash ( IS 251 : 2024 )")	-	1000	-
4.4.1("Material retained on 1.70 mm IS Sieve ( IS 251 : 2024 )")	-	1000	-
4.4.1("Material passing through 75 μm IS Sieve ( IS 251 : 2024 )")	-	1000	-
4.5 Table 1 (i)("Total alkalinity (as Na₂CO₃) ( IS 251 : 2024 )")	-	1000	-
4.5 Table 1 (ii)("Matter insoluble in water ( IS 251 : 2024 )")	-	1000	-
4.5 Table 1 (iii)("Sulphate (Na₂SO₄) ( IS 251 : 2024 )")	-	1000	-
4.5 Table 1 (iv)("Chloride (as NaCl) ( IS 251 : 2024 )")	-	1000	-
4.5 Table 1 (5)("Iron (as Fe₂O₃) ( IS 251 : 2024 )")	-	1000	-

19 Jul, 2027

-
Included w.e.f.18.08.2025

IS 14756 (2024)

Stainless Steel Utensils - Specification (THIRD REVISION)

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 3.1(Material used for manufacturing utensils)	-	1000	-
Cl 3.2(Material used for composite bottom)	-	1000	-
Cl 3.3(Material used for body of utensil of 3-ply construction)	-	1000	-
Cl 3.4(Material used for stainless steel lid)	-	1000	-
Cl 3.5(Material used for tempered glass lid)	-	1000	-
Cl 3.5(Material used for stainless steel rim)	-	1000	-
Cl 4.2 & Table 1(Minimum Sheet Thickness for Body of Utensil)	-	1000	-
Cl 4.2 & Table 2(Minimum Sheet Thickness for Lid of Utensil)	-	1000	-
Cl 4.2(Thickness of the finished utensil)	-	1000	-
Cl 4.3(Classification)	-	1000	-
Cl 4.4 (i)(Thickness of Aluminium disc/core)	-	1000	-
Cl 4.4 (ii)(Thickness of Protector/cowl)	-	1000	-
Cl 4.5(Minimum sheet thickness (3-ply utensil))	-	1000	-
Cl 4.5(Thickness of finished utensil (3-ply utensil))	-	1000	-
Cl 5.1(Manufacturing defect & visual appearance)	-	1000	-
CL 5.2(Accessibility for cleaning)	-	1000	-
Cl 5.3(Joining of handles to the utensils)	-	1000	-
Cl 5.4(Requirement for handles)	-	1000	-
Cl 5.5(Welding (Finish))	-	1000	-
Cl 5.6(Finish of 3-ply utensil)	-	1000	-
Cl 5.7(Requirement for coating)	-	1000	-
Cl 6.4(Dry Heat Test (for Cladded Utensils Only))	-	2500	-
Cl 6.5(Coating Thickness Test (for Copper Deposit))	-	2500	-
Cl 6.6(Thermal shock test (3-ply construction utensil body))	-	2500	-
Cl 6.7(Nominal Capacity Test)	-	2500	-
Cl 8(Marking)	-	1000	-
3.1(a) Carbon)	-	1000	-
3.1(b) Silicon)	-	1000	-
3.1(c)Manganese)	-	1000	-
3.1(d) Nickel)	-	1000	-
3.1(Chromium)	-	1000	-
3.1(Sulphu)	-	1000	-
3.1(Phosphorus)	-	1000	-
Stainless Steel Utensils - Specification (THIRD REVISION)(Copper)	-	1000	-
3.1(Nitrogen)	-	1000	-
3.2 a(a) Carbon)	-	1000	-
3.2 a(b) Silicon)	-	1000	-
68995(Manganese)	-	1000	-
3.2 a(d) Nickel)	-	1000	-
3.2 a(Chromium)	-	1000	-
3.2 a(Sulphur)	-	1000	-
3.2 a(g) Phosphorus)	-	1000	-
3.2 a(h) Copper)	-	1000	-
3.2 a(Nitrogen)	-	1000	-
3.2 b(a) Aluminium)	-	1000	-
3.2 b(b) Copper)	-	1000	-
3.2 b(c) Magnesium)	-	1000	-
3.2 b(d) Silicon)	-	1000	-
3.2 b(e) Iron)	-	1000	-
3.2 b(f) Manganese)	-	1000	-
3.2 b(d) Silicon)	-	1000	-
3.2 b(e) Iron)	-	1000	-
3.2 b(f) Manganese)	-	1000	-
3.2 b(g) Zinc)	-	1000	-
3.2 b(h) Titanium)	-	1000	-
3.2 b(i) Chromium)	-	1000	-
3.2 b(j) Cu+Si+Fe+Mn+Zn+mg)	-	1000	-
3.2 b(k) Lead)	-	1000	-
3.2 c(a) Carbon)	-	1000	-
3.2 c(b) Silicon)	-	1000	-
3.2 c(c) Manganese)	-	1000	-
3.2 c(d) Nickel)	-	1000	-
3.2 c(e) Chromium)	-	1000	-
3.2 c(f) Sulphur)	-	1000	-
3.2 c(g) Phosphorus)	-	1000	-
3.3(a) Inner layer)	-	1000	-
3.3(b) Middlelayer)	-	1000	-
3.3(c) Outerlayer)	-	1000	-
3.4(a) Carbon)	-	1000	-
3.4(b) Silicon)	-	1000	-
3.4(c) Manganese)	-	1000	-
3.4(d) Nickel)	-	1000	-
3.4(e) Chromium)	-	1000	-
3.4(f) Sulphur)	-	1000	-
3.4(g) Phosphorus)	-	1000	-
3.4(h) Copper)	-	1000	-
3.4(i) Nitrogen)	-	1000	-
3.4(Thickness stainless steel lid)	-	1000	-
3.5(If the utensils provided with tempered glass lid)	-	1000	-
4.1(Shapes and Dimensions)	-	1000	-
4.2(Thickness of the sheet)	-	1000	-
4.3(Classifications)	-	1000	-
4.3(Core Thickness for 3-ply Construction (asper IS15960))	-	1000	-
4.3(Thickness of protective layer (as per IS 15960))	-	1000	-
4.4(Thickness of 3ply full body utensil)	-	1000	-
5(Workmanship and finish)	-	1000	-
5.4(Handles)	-	1000	-
4.1 of IS 13395(Construction)	-	1000	-
4.2 of IS 13395(Materials)	-	1000	-
4.3 of IS 13395(Selection and Size)	-	1000	-
4.4 of Is 13395(Position of Handle and Knob with Respect to Cookware)	-	1000	-
4.5 of IS 13395(Attachment to Cookware)	-	1000	-
5.2 of IS 13395(Bending Strength)	-	1000	-
5.3 of IS 13395(Torque Strength)	-	1000	-
5.4 of IS 13395(Impact Strength)	-	1000	-
5.5 of IS 13395(Fatigue Resistance 15 000 cycles withstand)	-	1000	-
5.6 of IS 13395(Leakage)	-	1500	-
5.7 of IS 13395(Thermal Insulation)	-	1500	-
5.8 of IS 13395(Heat Resistance)	-	2000	-
5.9 of IS 13395(Washing Resistance)	-	1000	-
5.10 of IS 13395(Burning Resistance)	-	1000	-
5.5(Material comes in contact with food)	-	2000	-
6.1(Staining Test)	-	2000	-
6.2(Mechanical Shock Test)	-	2000	-
6.3(Thermal Shock Test)	-	2000	-
6.4(Dry Heat Test)	-	2000	-
6.6(Heat test)	-	2000	-
6.7.1(Nominal Capacity Test)	-	2000	-
6.7.2(Internal diameter of utensil)	-	2000	-
Cl 5.8(Coating thickness test)	-	2000	-
Cl 5.8(Coating adhesion test)	-	2000	-
Cl 5.8.1(Thermal shock test (Coating))	-	2000	-
Cl 6.1(Staining Test (Type Test - Frequency Once in a Year))	-	2000	-
Cl 6.2(Mechanical Shock Test (for Cladded Utensils Only))	-	2000	-
Cl 6.3(Thermal Shock Test (for Cladded Utensils Only))	-	2000	-

19 Jul, 2027

-
Included w.e.f 30.01.2026

IS 302 : Part 2 : Sec 24 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 24 refrigerators, food - Freezers and ice - Makers

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
31(Resistance to rusting)	-	2000	-
30.3(Resistance to heat and fire)	-	2000	-
30.2(Resistance to heat and fire)	-	2000	-
30.1(Resistance to heat and fire)	-	2000	-
30.1(Resistance to heat and fire)	-	2000	-
29.2 & 29.3(Clearances, creepage distances )	-	2000	-
29.1 and table 2(creepage and Clearances distances )	-	2000	-
28.2 to 28.4(Screws and connections)	-	2000	-
28.1, Table No.-14(Screws and connections)	-	2000	-
27.5(Provision for earthing)	-	2000	-
27.1 to 27.4(Provision for earthing)	-	2000	-
26.10 & 26.13(Terminals for external conductors)	-	2000	-
26.9(Terminals for external conductors)	-	2000	-
26.1 to 26.8(Terminals for external conductors)	-	2000	-
25.7 to 25.13(Supply connection and external flexible cords)	-	2000	-
25.6(Supply connection and external flexible cords)	-	2000	-
25.4(Supply connection and external flexible cords)	-	2000	-
25.4(Supply connection and external flexible cords)	-	2000	-
25.3(Supply connection and external flexible cords)	-	2000	-
25.2(Supply connection and external flexible cords)	-	2000	-
25.1(Supply connection and external flexible cords)	-	2000	-
24.2 ,24.3,24.5 & 24.6(Components)	-	2000	-
24.1(Components)	-	2000	-
23.5 to 23.8(Internal wiring)	-	2000	-
23.4(Internal wiring)	-	2000	-
23.3(Internal wiring)	-	2000	-
23.1 & 23.2(Internal wiring)	-	2000	-
22.101 to 22.103(Constructions)	-	2000	-
22.13 to 22.33(Constructions)	-	2000	-
22.12(Constructions)	-	2000	-
22.11(Constructions)	-	2000	-
22.7 to 22.10(Constructions)	-	2000	-
22.6(Constructions)	-	2000	-
22.5(Constructions)	-	2000	-
22.4(Constructions)	-	2000	-
22.3(Constructions)	-	2000	-
22.2(Constructions)	-	2000	-
22.1(Constructions)	-	2000	-
21.2(MECHANICAL STRENGTH)	-	2000	-
21.1(MECHANICAL STRENGTH)	-	2000	-
20.2(Stability and mechanical hazards)	-	2000	-
20.1(Stability and mechanical hazards)	-	2000	-
19.103(ABNORMAL OPERATION)	-	2000	-
19.102(ABNORMAL OPERATION)	-	2000	-
19.101(ABNORMAL OPERATION)	-	2000	-
19.11(ABNORMAL OPERATION)	-	2000	-
19.9(ABNORMAL OPERATION)	-	2000	-
19.7(ABNORMAL OPERATION)	-	2000	-
19(ABNORMAL OPERATION)	-	2000	-
17(Over load Protection )	-	2000	-
16.4(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	2000	-
16.3 & table(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	2000	-
16.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	2000	-
16 & 16.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	2000	-
15.103(Moisture resistance)	-	2000	-
15.102(Moisture resistance)	-	2000	-
15.101(Moisture resistance)	-	2000	-
15.4(Moisture resistance)	-	2000	-
15.3(Moisture resistance)	-	2000	-
15.2(Moisture resistance)	-	2000	-
15(Moisture resistance)	-	5000	-
14( RADIO AND TELEVISION INTERFERENCE SUPPRESSION )	-	2000	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	2000	-
12,12.1,12.2 & 12.3(Heating)	-	2000	-
11.103(TEMPERATURE RISE)	-	2000	-
11.102(TEMPERATURE RISE)	-	2000	-
11.101(TEMPERATURE RISE)	-	2000	-
11.1(TEMPERATURE RISE)	-	2000	-
11.8(TEMPERATURE RISE)	-	2000	-
11.7(TEMPERATURE RISE)	-	2000	-
11.6(TEMPERATURE RISE)	-	2000	-
11.5(TEMPERATURE RISE)	-	2000	-
11.4(TEMPERATURE RISE)	-	2000	-
11.2(TEMPERATURE RISE)	-	2000	-
11(TEMPERATURE RISE)	-	2000	-
10.1,10.2 10.101,10.102( Input and Current)	-	2000	-
9.2(Startability Test)	-	2000	-
9.1(Startability Test)	-	2000	-
9(Starting of motor operated Appliances)	-	2000	-
8.1.5(Protection against access to live parts)	-	2000	-
8.1.4(Protection against access to live parts)	-	2000	-
8.1.3(Protection against access to live parts)	-	2000	-
8.1.2(Protection against access to live parts)	-	2000	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	2000	-
7.1 , 7.12, 7.14,7.15(Marking)	-	2000	-
31(Resistance to rusting)	-	2000	-
30.3(Resistance to heat and fire)	-	2000	-
30.2(Resistance to heat and fire)	-	2000	-
30.1(Resistance to heat and fire)	-	2000	-
30.1(Resistance to heat and fire)	-	2000	-
29.2 & 29.3(Clearances, creepage distances )	-	2000	-
29.1 and table 2(creepage and Clearances distances )	-	2000	-
28.2 to 28.4(Screws and connections)	-	2000	-
28.1, Table No.-14(Screws and connections)	-	2000	-
27.5(Provision for earthing)	-	2000	-
27.1 to 27.4(Provision for earthing)	-	2000	-
26.10 & 26.13(Terminals for external conductors)	-	2000	-
26.9(Terminals for external conductors)	-	2000	-
26.1 to 26.8(Terminals for external conductors)	-	2000	-
25.7 to 25.13(Supply connection and external flexible cords)	-	2000	-
25.6(Supply connection and external flexible cords)	-	2000	-
25.4(Supply connection and external flexible cords)	-	2000	-
25.4(Supply connection and external flexible cords)	-	2000	-
25.3(Supply connection and external flexible cords)	-	2000	-
25.2(Supply connection and external flexible cords)	-	2000	-
25.1(Supply connection and external flexible cords)	-	2000	-
24.2 ,24.3,24.5 & 24.6(Components)	-	2000	-
24.1(Components)	-	2000	-
23.5 to 23.8(Internal wiring)	-	2000	-
23.4(Internal wiring)	-	2000	-
23.3(Internal wiring)	-	2000	-
23.1 & 23.2(Internal wiring)	-	2000	-
22.101 to 22.103(Constructions)	-	2000	-
22.13 to 22.33(Constructions)	-	2000	-
22.12(Constructions)	-	2000	-
22.11(Constructions)	-	2000	-
22.7 to 22.10(Constructions)	-	2000	-
22.6(Constructions)	-	2000	-
22.5(Constructions)	-	2000	-
22.4(Constructions)	-	2000	-
22.3(Constructions)	-	2000	-
22.2(Constructions)	-	2000	-
22.1(Constructions)	-	2000	-
21.2(MECHANICAL STRENGTH)	-	2000	-
21.1(MECHANICAL STRENGTH)	-	2000	-
20.2(Stability and mechanical hazards)	-	2000	-
20.1(Stability and mechanical hazards)	-	2000	-
19.103(ABNORMAL OPERATION)	-	2000	-
19.102(ABNORMAL OPERATION)	-	2000	-
19.101(ABNORMAL OPERATION)	-	2000	-
19.11(ABNORMAL OPERATION)	-	2000	-
19.9(ABNORMAL OPERATION)	-	2000	-
19.7(ABNORMAL OPERATION)	-	2000	-
19(ABNORMAL OPERATION)	-	2000	-
17(Over load Protection )	-	2000	-
16.4(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	2000	-
16.3 & table(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	2000	-
16.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	2000	-
16 & 16.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	2000	-
15.103(Moisture resistance)	-	2000	-
15.102(Moisture resistance)	-	2000	-
15.101(Moisture resistance)	-	2000	-
15.4(Moisture resistance)	-	2000	-
15.3(Moisture resistance)	-	2000	-
15.2(Moisture resistance)	-	2000	-
15(Moisture resistance)	-	5000	-
14( RADIO AND TELEVISION INTERFERENCE SUPPRESSION )	-	2000	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	2000	-
12,12.1,12.2 & 12.3(Heating)	-	2000	-
11.103(TEMPERATURE RISE)	-	2000	-
11.102(TEMPERATURE RISE)	-	2000	-
11.101(TEMPERATURE RISE)	-	2000	-
11.1(TEMPERATURE RISE)	-	2000	-
11.8(TEMPERATURE RISE)	-	2000	-
11.7(TEMPERATURE RISE)	-	2000	-
11.6(TEMPERATURE RISE)	-	2000	-
11.5(TEMPERATURE RISE)	-	2000	-
11.4(TEMPERATURE RISE)	-	2000	-
11.2(TEMPERATURE RISE)	-	2000	-
11(TEMPERATURE RISE)	-	2000	-
10.1,10.2 10.101,10.102( Input and Current)	-	2000	-
9.2(Startability Test)	-	2000	-
9.1(Startability Test)	-	2000	-
9(Starting of motor operated Appliances)	-	2000	-
8.1.5(Protection against access to live parts)	-	2000	-
8.1.4(Protection against access to live parts)	-	2000	-
8.1.3(Protection against access to live parts)	-	2000	-
8.1.2(Protection against access to live parts)	-	2000	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	2000	-
7.1 , 7.12, 7.14,7.15(Marking)	-	2000	-
6(Classifications)	-	2000	-
6(Classifications)	-	2000	-

19 Jul, 2027

-
Included w.e.f.22.07.2025 exclusion Cl 19.11.4.1 to 19.11.4.7(EMI/EMC) 32 (Radiation, toxicity and similar hazards)

IS 302 : Part 2 : Sec 4 (1993)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 4 spin extractors

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(GENERAL REQUIREMENTS)	-	2000	-
4(GENERAL NOTES ON TESTS)	-	2000	-
5(RATING)	-	2000	-
6(CLASSIFICATION)	-	2000	-
7(MARKING)	-	2000	-
8(PROTECTION AGAINST ELECTRIC SHOCK)	-	2000	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	2000	-
10(INPUT AND CURRENT)	-	2000	-
11(HEATING)	-	2000	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	2000	-
14(RADIO AND TELEVISION INTERFERENCE SUPPRESSION)	-	2000	-
15(MOISTURE RESISTANCE)	-	3000	-
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH (AFTER HUMIDITY TREATMENT))	-	2000	-
17(OVERLOAD PROTECTION)	-	2000	-
19(ABNORMAL OPERATION)	-	2000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	2000	-
21(MECHANICAL STRENGTH)	-	2000	-
22(CONSTRUCTION)	-	2000	-
23(INTERNAL WIRING)	-	2000	-
24(COMPONENTS)	-	2000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	2000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	2000	-
27(PROVISION FOR EARTHING)	-	2000	-
28(SCREWS AND CONNECTIONS)	-	2000	-
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	2000	-
30(RESISTANCE TO HEAT, FIRE AND TRACKING)	-	2000	-
31(RESISTANCE TO RUSTING)	-	2000	-
3(GENERAL REQUIREMENTS)	-	2000	-
4(GENERAL NOTES ON TESTS)	-	2000	-
5(RATING)	-	2000	-
6(CLASSIFICATION)	-	2000	-
7(MARKING)	-	2000	-
8(PROTECTION AGAINST ELECTRIC SHOCK)	-	2000	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	2000	-
10(INPUT AND CURRENT)	-	2000	-
11(HEATING)	-	2000	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	2000	-
14(RADIO AND TELEVISION INTERFERENCE SUPPRESSION)	-	2000	-
15(MOISTURE RESISTANCE)	-	3000	-
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH (AFTER HUMIDITY TREATMENT))	-	2000	-
17(OVERLOAD PROTECTION)	-	2000	-
19(ABNORMAL OPERATION)	-	2000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	2000	-
21(MECHANICAL STRENGTH)	-	2000	-
22(CONSTRUCTION)	-	2000	-
23(INTERNAL WIRING)	-	2000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	2000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	2000	-
27(PROVISION FOR EARTHING)	-	2000	-
28(SCREWS AND CONNECTIONS)	-	2000	-
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	2000	-
30(RESISTANCE TO HEAT, FIRE AND TRACKING)	-	2000	-
31(RESISTANCE TO RUSTING)	-	2000	-

19 Jul, 2027

-
Included w.e.f 11.07.2025 Exclusion: Cl 19.11.4.1-19.11.4.7(EMI/EMC), Cl 24 Component

IS 302 : Part 2 : Sec 46 (1993)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 46 electric steam cookers

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General)	-	2000	-
5(Rating)	-	2000	-
6(Classification)	-	2000	-
7(Marking)	-	2000	-
8("8 PROTECTION AGAINST ELECTRIC SHOCK ")	-	2000	-
9("STARTING OF MOTOR-OPERATING APPLIANCES ")	-	2000	-
10(INPUT AND CURRENT)	-	2000	-
11(TEMPERATURE RISE)	-	2000	-
12("OPERATION UNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS")	-	2000	-
13(" ELECTRICAL INSULATION AND LEKAGE CURRENT AT OPERATING TEMPERATURE ")	-	2000	-
14("RADIO AND TELEVISION INTERFERENCE SUPPRESSION")	-	0	-
15(MOISTURE RESISTANCE)	-	3000	-
16("INSULATION RESlSTANCE AND specified in 16.2. ELECTRIC SHOCK STRENGTH ( AFTER HUMIDITY TREATMENT )")	-	2000	-
17(OVERLOAD PROTECTION)	-	2000	-
19(ABNORMAL OPERATION)	-	2000	-
20("STABILITY AND MECHANICAL HAZARDS")	-	2000	-
21(MECHANICAL STRENGTH)	-	2000	-
21(MECHANICAL STRENGTH)	-	2000	-
22(CONSTRUCTION)	-	2000	-
22(CONSTRUCTION)	-	2000	-
23(INTERNAL WIRING)	-	2000	-
24(COMPONENTS)	-	2000	-
25("SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS ")	-	2000	-
26("TERMINALS FOR EXTERNAL CONDUCTORS")	-	2000	-
27(PROVISION FOR EARTHING)	-	2000	-
28(SCREWS AND CONNECTIONS)	-	2000	-
30("RESISTANCE TO HEAT, FIRE AND TRACKING ")	-	2000	-
31(RESISTANCE TO RUSTING)	-	2000	-
31(RESISTANCE TO RUSTING)	-	2000	-
20("STABILITY AND MECHANICAL HAZARDS")	-	2000	-
21(MECHANICAL STRENGTH)	-	2000	-
22(CONSTRUCTION)	-	2000	-
23(INTERNAL WIRING)	-	2000	-
24(COMPONENTS)	-	2000	-
25("SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS ")	-	2000	-
26("TERMINALS FOR EXTERNAL CONDUCTORS")	-	2000	-
27(PROVISION FOR EARTHING)	-	2000	-
28(SCREWS AND CONNECTIONS)	-	2000	-
30("RESISTANCE TO HEAT, FIRE AND TRACKING ")	-	2000	-
31(RESISTANCE TO RUSTING)	-	2000	-

19 Jul, 2027

-
Included w.e.f.22.07.2025 Exclusion Cl 19.11.4.1 to 19.11.4.7(EMI/EMC) 32 (Radiation, toxicity and similar hazards)

IS 302 : Part 2 : Sec 45 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 45 electric heating tools

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Rating)	-	2000	-
6(Classification)	-	2000	-
7(Marking)	-	2000	-
8(Protection against Access to Live Parts)	-	2000	-
9(Starting Of Motor Operated Appliances)	-	2000	-
10("Power Input & Current")	-	2000	-
11(Temperature Rise/ Heating)	-	2000	-
12(Operation Under Overload Condition)	-	2000	-
13(Electric Insulation at Operating Temperature)	-	2000	-
14("Radio and Television Interference Suppression / Transient Over Voltage ")	-	2000	-
15(Moisture Resistance)	-	3000	-
16(Insulation Resistance and Electric Strength/ Leakage Current and Electric Strength (After Humidity Treatment))	-	2000	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	2000	-
18(Endurance)	-	0	-
19(Abnormal Operation)	-	2000	-
20(Stability & Mechanical Hazards)	-	2000	-
21(Mechanical strength)	-	2000	-
22(Construction)	-	2000	-
23(Internal Wiring)	-	2000	-
24(Components)	-	2000	-
25(Supply Connection & External Flexible Cords)	-	2000	-
26(Terminals For External Conductors)	-	2000	-
27(Provision For Earthing)	-	2000	-
28(Screws & Connections)	-	2000	-
29(Creepage Distances & Clearances)	-	2000	-
30(Resistance to Heat, Fire and Tracking)	-	2000	-
XXV of Table 101(Resistance to Rusting)	-	2000	-
4(General Requirement)	-	2000	-

19 Jul, 2027

-
Included w.e.f.22.07.2025 Exclusion Cl 19.11.4.1 to 19.11.4.7(EMI/EMC) 32 (Radiation, toxicity and similar hazards)

IS 302 : Part 2 : Sec 32 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 32 massage appliances

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 31 302-2-32 : 1994(Resistance to Rusting)	-	2000	-
Cl. 30 302-2-32 : 1994(Resistance to Heat Fire & Tracking )	-	2000	-
Cl. 29 302-2-32 : 1994(Clearances, Creepage Distances & Solid insulation )	-	2000	-
Cl. 28 302-2-32 : 1994(Screws & Connections)	-	2000	-
Cl. 27 302-2-32 : 1994(Provision for Earthing )	-	2000	-
Cl. 26 302-2-32 : 1994(Terminals for External conductors )	-	2000	-
Cl. 25 302-2-32 : 1994(Supply Connection & External Flexible Cords)	-	2000	-
Cl. 24 302-2-32 : 1994(Components)	-	2000	-
Cl. 23 302-2-32 : 1994(Internal Wiring)	-	2000	-
Cl. 22 302-2-32 : 1994(Construction )	-	2000	-
Cl. 21 302-2-32 : 1994(Mechanical strength)	-	2000	-
Cl. 20 302-2-32 : 1994(Stability & Mechanical Hazards)	-	2000	-
Cl. 19 302-2-32 : 1994(Abnormal Operation )	-	2000	-
Cl. 18 302-2-32 : 1994(Endurance)	-	0	-
Cl. 17 302-2-32 : 1994(Overload Protection of Transformers and Associated Circuit)	-	2000	-
Cl. 16 302-2-32 : 1994(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	2000	-
Cl. 15 302-2-32: 1994(Moisture Resistance Test )	-	3000	-
Cl. 14 302-2-32 : 1994(Radio and television interference suppression / Transient over voltages)	-	2000	-
Cl. 13 302-2-32 : 1994(Leakage Current & Electric Strength at Operating Temperature)	-	2000	-
Cl. 11 302-2-32 : 1994(Temperature Rise)	-	2000	-
Cl. 10 302-2-32 : 1994(Power Input and Current )	-	2000	-
Cl. 9 302-2-32 : 1994(Protection Against Electric Shock)	-	2000	-
Cl. 8 302-2-32 : 1994(Starting of motor operated appliances)	-	2000	-
Cl. 7 302-2-32 : 1994(Marking)	-	2000	-
(CI. 6 IS 302-2-32 : 1994(Classification )	-	2000	-

19 Jul, 2027

-
Included w.e.f.22.07.2025 Exclusion Cl 19.11.4.1 to 19.11.4.7(EMI/EMC) 32 (Radiation, toxicity and similar hazards)

IS 302 : Part 2 : Sec 209 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 209 low speed food grinding machines

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 31 302-2-209 : 1994(Resistance to Rusting)	-	2000	-
Cl. 30 302-2-209 : 1994(Resistance to Heat Fire & Tracking )	-	2000	-
Cl. 29 302-2-209 : 1994(Clearances, Creepage Distances & Solid insulation )	-	2000	-
Cl. 28 302-2-209 : 1994(Screws & Connections)	-	2000	-
Cl. 27 302-2-209 : 1994(Provision for Earthing )	-	2000	-
Cl. 26 302-2-209 : 1994(Terminals for External conductors )	-	2000	-
Cl. 25 302-2-209 : 1994(Supply Connection & External Flexible Cords)	-	2000	-
Cl. 24 302-2-209 : 1994(Components)	-	2000	-
Cl. 23 302-2-209 : 1994(Internal Wiring)	-	2000	-
Cl. 22 302-2-209 : 1994(Construction )	-	2000	-
Cl. 21 302-2-209 : 1994(Mechanical strength)	-	2000	-
Cl. 20 302-2-209 : 1994(Stability & Mechanical Hazards)	-	2000	-
Cl. 19 302-2-209 : 1994(Abnormal Operation )	-	2000	-
Cl. 18 302-2-209 : 1994(Endurance)	-	0	-
Cl. 17 302-2-209 : 1994(Overload Protection of Transformers and Associated Circuit)	-	2000	-
Cl. 16 302-2-209 : 1994(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	2000	-
Cl. 15 302-2-209 : 1994(Moisture Resistance Test )	-	3000	-
Cl. 14 302-2-209 : 1994(Radio and television interference suppression / Transient over voltages)	-	2000	-
Cl. 13 302-2-209 : 1994(Leakage Current & Electric Strength at Operating Temperature)	-	2000	-
Cl. 11 302-2-209 : 1994(Temperature Rise)	-	2000	-
Cl. 10 302-2-209 : 1994(Power Input and Current )	-	2000	-
Cl. 9 302-2-209 : 1994(Starting of motor operated appliances)	-	2000	-
Cl. 8 302-2-209 : 1994(Protection Against Electric Shock )	-	2000	-
Cl. 7 302-2-209 : 1994(Marking)	-	2000	-
(CI. 6 IS 302-2-209 : 1994(Classification )	-	2000	-
Cl. 5 IS 302-2-209 :1994(Rating)	-	2000	-
Cl. 31 302-2-209 : 1994(Resistance to Rusting)	-	2000	-
Cl. 30 302-2-209 : 1994(Resistance to Heat Fire & Tracking )	-	2000	-
Cl. 29 302-2-209 : 1994(Clearances, Creepage Distances & Solid insulation )	-	2000	-
Cl. 28 302-2-209 : 1994(Screws & Connections)	-	2000	-
Cl. 27 302-2-209 : 1994(Provision for Earthing )	-	2000	-
Cl. 26 302-2-209 : 1994(Terminals for External conductors )	-	2000	-
Cl. 25 302-2-209 : 1994(Supply Connection & External Flexible Cords)	-	2000	-
Cl. 23 302-2-209 : 1994(Internal Wiring)	-	2000	-
Cl. 22 302-2-209 : 1994(Construction )	-	2000	-
Cl. 21 302-2-209 : 1994(Mechanical strength)	-	2000	-
Cl. 20 302-2-209 : 1994(Stability & Mechanical Hazards)	-	2000	-
Cl. 19 302-2-209 : 1994(Abnormal Operation )	-	2000	-
Cl. 18 302-2-209 : 1994(Endurance)	-	2000	-
Cl. 17 302-2-209 : 1994(Overload Protection of Transformers and Associated Circuit)	-	2000	-
Cl. 16 302-2-209 : 1994(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	2000	-
Cl. 15 302-2-209 : 1994(Moisture Resistance Test )	-	2000	-
Cl. 14 302-2-209 : 1994(Radio and television interference suppression / Transient over voltages)	-	2000	-
Cl. 13 302-2-209 : 1994(Leakage Current & Electric Strength at Operating Temperature)	-	2000	-
Cl. 11 302-2-209 : 1994(Temperature Rise)	-	2000	-
Cl. 10 302-2-209 : 1994(Power Input and Current )	-	2000	-
Cl. 9 302-2-209 : 1994(Starting of motor operated appliances)	-	2000	-
Cl. 8 302-2-209 : 1994(Protection Against Electric Shock )	-	2000	-
Cl. 7 302-2-209 : 1994(Marking)	-	2000	-
(CI. 6 IS 302-2-209 : 1994(Classification )	-	2000	-
Cl. 5 IS 302-2-209 :1994(Rating)	-	2000	-

19 Jul, 2027

-
Included w.e.f 11.07.2025 Exclusion: Cl 19.11.4.1-19.11.4.7(EMI/EMC), Cl 24 Component, Cl 32 (Radiation Hazard)

IS 302 : Part 2 : Sec 208 (1994)

Safety of household and similar electrtcal appliances: Part 2 particular requirements: Sec 208 single walled baking ovens

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(GENERAL REQUIREMENT)	-	2000	-
4(GENERAL NOTES ON TESTS)	-	2000	-
5(RATING)	-	2000	-
6(CLASSIFICATION)	-	2000	-
7(MARKING)	-	2000	-
8(PROTECTION AGAINST ELECTRIC SHOCK)	-	2000	-
10(INPUT AND CURRENT)	-	2000	-
11(TEMPERATURE RISE)	-	2000	-
12(OPERATLON UNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS)	-	2000	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	2000	-
14(RADIO AND TELEVISION INTERFERENCE SUPPRESSION)	-	0	-
15(MOISTURE RESESTANCE)	-	3000	-
16(INSULATION RESISTANCE AND ELECTRIC SHOCK STRENGTH ( AFTER HUMIDITY TREATMENT ))	-	2000	-
17(OVERLOAD PROTECTION)	-	2000	-
19(ABNORMAL OPERATION)	-	2000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	2000	-
21(MECHANICAL STRENGTH)	-	2000	-
22(CONSTRUCTION)	-	2000	-
23(INTERNAL WIRING)	-	2000	-
24(COMPONENTS)	-	2000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	2000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	2000	-
27(PROVISION FOR EARTHING)	-	2000	-
28(SCREWS AND CONNECTIONS)	-	2000	-
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	2000	-
30(RESISTANCE TO HEAT, FIRE AND TACKING)	-	2000	-
31(RESISTANCE TO RUSTING)	-	2000	-
101.1(Type Tests)	-	0	-
101.2(Acceptance Tests)	-	0	-
101.3(Routine Tests)	-	0	-

19 Jul, 2027

-
Included w.e.f.22.07.2025 Exclusion Cl 19.11.4.1 to 19.11.4.7(EMI/EMC) 32 (Radiation, toxicity and similar hazards)

IS 302 : Part 2 : Sec 206 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 206 electric coffee makers

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
31(Resistance to Rusting)	-	2000	-
30(Resistance to Heat, Fire and Tracking)	-	2000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	2000	-
28(Screws & Connection)	-	2000	-
27(Provision For Earthing)	-	2000	-
26(Terminals For External Conductors)	-	2000	-
25(Supply Connection & External Flexible Cables and Cords)	-	2000	-
24(Component)	-	2000	-
23(Internal wiring)	-	2000	-
22(Construction)	-	2000	-
21(Mechanical strength)	-	2000	-
20(Stability & Mechanical Hazards)	-	2000	-
19(Abnormal Operation)	-	2000	-
18(Endurance)	-	3000	-
17(Overload Protection)	-	2000	-
16(Insulation resistance and Electric Strength (After humidity treatment))	-	2000	-
15(Moisture Resistance)	-	3000	-
14(Radio and television interference suppression/ Transient Overvoltages)	-	2000	-
13(Electrical insulation and Leakage Current at Operating Temperature)	-	2000	-
12(Operation under overload conditions of appliances with heating elements)	-	2000	-
11(Temperature Rise/Heating)	-	2000	-
10(Input)	-	2000	-
9(Starting Of Motor Operated Appliances)	-	2000	-
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	2000	-
7(Marking/ Marking & Instructions)	-	2000	-
6(Classification)	-	2000	-
5(Rating)	-	2000	-

19 Jul, 2027

-
Included w.e.f 10.07.2025 Exclusion : Cl 19.11.4.1-19.11.4.7(EMI/EMC), Cl 32 Radiation, toxicity and similar hazards

IS 302 : Part 2 : Sec 204 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 204 electric water boilers

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(GENERAL REQUIREMENT)	-	2000	-
4(GENERAL NOTES ON TESTS)	-	2000	-
5(RATING)	-	2000	-
6(CLASSIFICATION)	-	2000	-
7(MARKING)	-	2000	-
8(PROTECTION AGAINST ELECTRIC SHOCK)	-	2000	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	0	-
10(INPUT AND CURRENT)	-	3000	-
11(TEMPRATURE RISE)	-	2000	-
12(OPERATION TJNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS)	-	2000	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	2000	-
14(RADIO AND TELEVISION INTERFERENCE SUPPRESSION)	-	0	-
15(MOISTURE RESISTANCE)	-	3000	-
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	2000	-
17(OVERLOAD PROTECTION)	-	2000	-
18(ENDURANCE )	-	0	-
19(ABNORMAL OPERATION)	-	2000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	2000	-
21(MECHANICAL STRENGTH)	-	2000	-
22(CONSTRUCTION)	-	2000	-
23(INTERNAL WIRING)	-	2000	-
24(COMPONENTS)	-	2000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	2000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	2000	-
27(PROVISION FOR EARTHING)	-	2000	-
28(SCREWS AND CONNECTIONS)	-	2000	-
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	2000	-
30(RESISTANCE TO HEAT, FIRE AND TACKING)	-	2000	-
31(RESISTANCE TO RUSTING)	-	2000	-
101.1(Type Tests)	-	2000	-
101.2(Acceptance Tests)	-	2000	-
101.3(Routine Tests)	-	2000	-

19 Jul, 2027

-
Included w.e.f.22.07.2025 Exclusion Cl 19.11.4.1 to 19.11.4.7(EMI/EMC) 32 (Radiation, toxicity and similar hazards)

IS 302 : Part 2 : Sec 203 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 203 electric call bells and buzzers for indoor use

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Rating)	-	2000	-
6(Classification)	-	2000	-
7(Marking)	-	2000	-
8(Protection against Access to Live Parts)	-	2000	-
9(Starting Of Motor Operated Appliances)	-	0	-
10("Power Input & Current")	-	0	-
11(Temperature Rise/ Heating)	-	3000	-
12(Operation Under Overload Conditions of Appliances with heating Element)	-	0	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	3000	-
14("Radio and Television Interference Suppression / Transient Over Voltage ")	-	0	-
15(Moisture Resistance)	-	5000	-
16(Leakage Current and Electric Strength/ Insulation Resistance and Electric Strength (After Humidity treatment))	-	2000	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	2000	-
18(Endurance)	-	0	-
19(Abnormal Operation)	-	2000	-
20(Stability & Mechanical Hazards)	-	2000	-
21(Mechanical strength)	-	2000	-
22(Construction)	-	2000	-
23(Internal Wiring)	-	2000	-
24(Components)	-	2000	-
25(Supply Connection & External Flexible Cords)	-	2000	-
26(Terminals For External Conductors)	-	2000	-
27(Provision For Earthing)	-	2000	-
28(Screws & Connections)	-	2000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	2000	-
30(Resistance to Heat & Fire)	-	2000	-
31(Resistance to Rusting)	-	2000	-

19 Jul, 2027

-
Included w.e.f.22.07.2025 Exclusion Cl 19.11.4.1 to 19.11.4.7(EMI/EMC) 32 (Radiation, toxicity and similar hazards)

IS 302 : Part 2 : Sec 11 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 11 tumbler dryers

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(GENERAL REQUIREMENT)	-	2000	-
4(GENERAL NOTES ON TESTS)	-	2000	-
5(RATING)	-	2000	-
6(CLASSIFICATION)	-	2000	-
7(MARKING)	-	2000	-
8(PROTECTION AGAINST ELECTRIC SHOCK)	-	2000	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	0	-
10(INPUT AND CURRENT)	-	2000	-
11(HEATING)	-	2000	-
12(OPERATION TJNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS)	-	0	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	2000	-
14(RADIO AND TELEVISION INTERFERENCE SUPPRESSION)	-	2000	-
15(MOISTURE RESISTANCE)	-	3000	-
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	2000	-
17(OVERLOAD PROTECTION)	-	2000	-
18(ENDURANCE )	-	0	-
19(ABNORMAL OPERATION)	-	2000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	2000	-
21(MECHANICAL STRENGTH)	-	2000	-
22(CONSTRUCTION)	-	2000	-
23(INTERNAL WIRING)	-	2000	-
24(COMPONENTS)	-	2000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	2000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	2000	-
27(PROVISION FOR EARTHING)	-	2000	-
28(SCREWS AND CONNECTIONS)	-	2000	-
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	2000	-
30(RESISTANCE TO HEAT, FIRE AND TACKING)	-	2000	-
31(RESISTANCE TO RUSTING)	-	2000	-
101.1(Type Tests)	-	2000	-
101.2(Acceptance Tests)	-	2000	-
101.3(Routine Tests)	-	2000	-
3(GENERAL REQUIREMENT)	-	2000	-
4(GENERAL NOTES ON TESTS)	-	2000	-
5(RATING)	-	2000	-
6(CLASSIFICATION)	-	2000	-
7(MARKING)	-	2000	-
8(PROTECTION AGAINST ELECTRIC SHOCK)	-	2000	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	0	-
10(INPUT AND CURRENT)	-	2000	-
11(HEATING)	-	2000	-
12(OPERATION TJNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS)	-	0	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	2000	-
14(RADIO AND TELEVISION INTERFERENCE SUPPRESSION)	-	2000	-
15(MOISTURE RESISTANCE)	-	2000	-
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	2000	-
17(OVERLOAD PROTECTION)	-	2000	-
18(ENDURANCE )	-	0	-
19(ABNORMAL OPERATION)	-	2000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	2000	-
21(MECHANICAL STRENGTH)	-	2000	-
22(CONSTRUCTION)	-	2000	-
23(INTERNAL WIRING)	-	2000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	2000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	2000	-
27(PROVISION FOR EARTHING)	-	2000	-
28(SCREWS AND CONNECTIONS)	-	2000	-
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	2000	-
30(RESISTANCE TO HEAT, FIRE AND TACKING)	-	2000	-
31(RESISTANCE TO RUSTING)	-	2000	-
101.1(Type Tests)	-	2000	-
101.2(Acceptance Tests)	-	2000	-
101.3(Routine Tests)	-	2000	-
3(GENERAL REQUIREMENT)	-	-	-
4(GENERAL NOTES ON TESTS)	-	-	-
5(RATING)	-	-	-
6(CLASSIFICATION)	-	-	-
7(MARKING)	-	-	-
8(PROTECTION AGAINST ELECTRIC SHOCK)	-	-	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	-	-
10(INPUT AND CURRENT)	-	-	-
11(HEATING)	-	-	-
12(OPERATION TJNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS)	-	-	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	-	-
14(RADIO AND TELEVISION INTERFERENCE SUPPRESSION)	-	-	-
15(MOISTURE RESISTANCE)	-	-	-
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	-	-
17(OVERLOAD PROTECTION)	-	-	-
18(ENDURANCE )	-	-	-
19(ABNORMAL OPERATION)	-	-	-
20(STABILITY AND MECHANICAL HAZARDS)	-	-	-
21(MECHANICAL STRENGTH)	-	-	-
22(CONSTRUCTION)	-	-	-
23(INTERNAL WIRING)	-	-	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	-	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	-	-
27(PROVISION FOR EARTHING)	-	-	-
28(SCREWS AND CONNECTIONS)	-	-	-
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	-	-
30(RESISTANCE TO HEAT, FIRE AND TACKING)	-	-	-
31(RESISTANCE TO RUSTING)	-	-	-
101.1(Type Tests)	-	-	-
101.2(Acceptance Tests)	-	-	-
101.3(Routine Tests)	-	-	-

19 Jul, 2027

-
Included w.e.f.22.07.2025 Exclusion Cl 19.11.4.1 to 19.11.4.7(EMI/EMC) 32 (Radiation, toxicity and similar hazards)

IS 302 : Part 2 : SEC 31 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 31 range hoods

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No - 5(GENERAL CONDITIONS FOR THE TESTS)	-	2000	-
Clause No - 5.18(linear and angular dimension)	-	2000	-
Clause No - 6.2(harmfull ingress of water)	-	2000	-
Clause No - 8.1.1("PROTECTION AGAINST ACCESS TO LIVE PART- test probe B")	-	2000	-
Clause No - 8.1.2("PROTECTION AGAINST ACCESS TO LIVE PART - test probe 13")	-	2000	-
Clause No - 8.2(Addition)	-	2000	-
Clause No - 10.1, Table No. -1(power input deviation)	-	2000	-
Clause No - 13.3("LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE")	-	2000	-
Clause No - 13.3,Table No.- 4(voltage for electrical strength)	-	2000	-
Clause No - 14(Impulse test voltage)	-	2000	-
Clause No - 15.1.1(MOISTURE RESISTANCE)	-	3000	-
Clause No -19.7(test is repeated with the capacitor short circuited)	-	2000	-
Clause No -21.1(Mechanical strength)	-	2000	-
Clause No -22.1(construction)	-	2000	-
Clause No -22.11(push force applied)	-	2000	-
Clause No -24.1.2(safety isolating transformer)	-	2000	-
Clause No -24.1.3(for switches)	-	2000	-
Clause No -24.1.4(for automatic control)	-	2000	-
Clause No -24.1.5(for innterconnection couplers)	-	2000	-
Clause No -24.4(plug and socket)	-	2000	-
Clause No -25.8, Table no -11(conductor resistance)	-	2000	-
Clause No -25.5(dimension for pins)	-	2000	-
Clause No -27.6(for circuit board)	-	2000	-
Clause No -29.2(comparative tracking index)	-	2000	-
Clause No -29.3.3(dry heat test)	-	2000	-
Clause No -30.2.1(glow wire test)	-	2000	-
Clause No -30.101("incorporate combustible material")	-	2000	-
15(MOISTURE RESISTANCE)	-	3000	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	2000	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	2000	-
18(ENDURANCE)	-	0	-
28(SCREWS AND CONNECTIONS)	-	2000	-
31(RESISTANCE TO RUSTING)	-	2000	-
22(CONSTRUCTION)	-	2000	-
24(COMPONENTS)	-	2000	-
11(Heating)	-	2000	-

19 Jul, 2027

-
Included w.e.f 10.07.2025 Exclusion : Cl 19.11.4.1-19.11.4.7(EMI/EMC), Cl 32 Radiation, toxicity and similar hazards

IS 302 : Part 2 : Sec 13 (2024)

Household and Similar Electrical Appliances âSafety Part 2 Particular Requirements Section 13 Deep Fat Fryers, Frying Pans and Similar Appliances (First Revision)

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	2000	-
8(Protection against access to live parts)	-	2000	-
10(Power input and current)	-	2000	-
11(Heating)	-	2000	-
13.1 &13.2(Leakage current test)	-	2000	-
13.1 &13.3(Electric strength test)	-	2000	-
14(Transient overvoltages)	-	2000	-
15(Moisture resistance)	-	3000	-
15.3(Moisture resistance)	-	2000	-
15.101(Moisture resistance)	-	2000	-
16.1 &16.2(Leakage current test)	-	2000	-
16.1 & 16.3(Electric strength test)	-	2000	-
17(Overload protection of transformers and associated circuits)	-	2000	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	2000	-
19.101 to to 19.102(Abnormal operation)	-	2000	-
20(Stability and mechanical hazards)	-	2000	-
21(Mechanical strength)	-	2000	-
22(Construction)	-	2000	-
22.101(Construction)	-	2000	-
23(Internal wiring)	-	2000	-
24(Components)	-	2000	-
25("Supply connection and external flexible cords")	-	2000	-
26("Terminals for external conductors")	-	2000	-
27(Provision for earthing)	-	2000	-
28(Screws and connections)	-	2000	-
29("Clearances, creepage distances and solid insulation")	-	2000	-
30(Resistance to heat and fire)	-	2000	-
31(Resistance to rusting)	-	2000	-
7(Marking and instructions)	-	2000	-
8(Protection against access to live parts)	-	2000	-
10(Power input and current)	-	2000	-
11(Heating)	-	2000	-
13.1 &13.2(Leakage current test)	-	2000	-
13.1 &13.3(Electric strength test)	-	2000	-
14(Transient overvoltages)	-	2000	-
15(Moisture resistance)	-	2000	-
15.3(Moisture resistance)	-	2000	-
15.101(Moisture resistance)	-	2000	-
16.1 &16.2(Leakage current test)	-	2000	-
16.1 & 16.3(Electric strength test)	-	2000	-
17(Overload protection of transformers and associated circuits)	-	2000	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	2000	-
19.101 to to 19.102(Abnormal operation)	-	2000	-
20(Stability and mechanical hazards)	-	2000	-
21(Mechanical strength)	-	2000	-
22(Construction)	-	2000	-
22.101(Construction)	-	2000	-
23(Internal wiring)	-	2000	-
24(Components)	-	2000	-
25("Supply connection and external flexible cords")	-	2000	-
26("Terminals for external conductors")	-	2000	-
27(Provision for earthing)	-	2000	-
28(Screws and connections)	-	2000	-
29("Clearances, creepage distances and solid insulation")	-	2000	-
30(Resistance to heat and fire)	-	2000	-
31(Resistance to rusting)	-	2000	-

19 Jul, 2027

-
Included w.e.f.22.07.2025 Exclusion Cl 19.11.4.1 to 19.11.4.7(EMI/EMC) 32 (Radiation, toxicity and similar hazards)

IS 302 : Part 2 : Sec 59 (2024)

Household and Similar Electrical Appliances â Safety Part 2 Particular Requirements Section 59 Insect Killers (First Revision)

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General)	-	2000	-
5(General conditions for the tests)	-	2000	-
6(Classification)	-	2000	-
7(Marking and instructions)	-	2000	-
8("8 PROTECTION AGAINST ELECTRIC SHOCK ")	-	2000	-
10(Power input and current)	-	2000	-
11(Heating)	-	2000	-
11.3(Heating)	-	2000	-
11.7(Heating)	-	2000	-
11.8(Heating)	-	2000	-
12(Charging of metal-ion batteries)	-	2500	-
13(Leakage current and electric strength at operating temperature)	-	2000	-
14(Transient overvoltages)	-	3000	-
15(MOISTURE RESISTANCE)	-	2000	-
16(Leakage current and electric strength)	-	2000	-
17(Overload protection of transformers and associated circuits)	-	2000	-
19(ABNORMAL OPERATION)	-	2000	-
21(MECHANICAL STRENGTH)	-	2000	-
22(CONSTRUCTION)	-	2000	-
23(INTERNAL WIRING)	-	2000	-
24(COMPONENTS)	-	2000	-
25("SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS ")	-	2000	-
26("TERMINALS FOR EXTERNAL CONDUCTORS")	-	2000	-
27(PROVISION FOR EARTHING)	-	2000	-
28(SCREWS AND CONNECTIONS)	-	2000	-
30("RESISTANCE TO HEAT, FIRE AND TRACKING ")	-	2000	-
31(RESISTANCE TO RUSTING)	-	3000	-
32(Radiation, toxicity and similar hazards)	-	2000	-
29(Clearances, creepage distances and solid insulation)	-	2000	-
20("STABILITY AND MECHANICAL HAZARDS")	-	2000	-
4(General)	-	2000	-
5(General conditions for the tests)	-	2000	-
6(Classification)	-	2000	-
7(Marking and instructions)	-	2000	-
8("8 PROTECTION AGAINST ELECTRIC SHOCK ")	-	2000	-
10(Power input and current)	-	2000	-
11(Heating)	-	2000	-
11.3(Heating)	-	2000	-
11.7(Heating)	-	2000	-
11.8(Heating)	-	2000	-
12(Charging of metal-ion batteries)	-	2500	-
13(Leakage current and electric strength at operating temperature)	-	2000	-
14(Transient overvoltages)	-	2000	-
15(MOISTURE RESISTANCE)	-	3000	-
16(Leakage current and electric strength)	-	2000	-
17(Overload protection of transformers and associated circuits)	-	2000	-
19(ABNORMAL OPERATION)	-	2000	-
21(MECHANICAL STRENGTH)	-	2000	-
22(CONSTRUCTION)	-	2000	-
23(INTERNAL WIRING)	-	2000	-
24(COMPONENTS)	-	2000	-
25("SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS ")	-	2000	-
26("TERMINALS FOR EXTERNAL CONDUCTORS")	-	2000	-
27(PROVISION FOR EARTHING)	-	2000	-
28(SCREWS AND CONNECTIONS)	-	2000	-
30("RESISTANCE TO HEAT, FIRE AND TRACKING ")	-	2000	-
31(RESISTANCE TO RUSTING)	-	2000	-
29(Clearances, creepage distances and solid insulation)	-	2000	-
20("STABILITY AND MECHANICAL HAZARDS")	-	2000	-

19 Jul, 2027

-
Included w.e.f 10.07.2025 Exclusion : Cl 19.11.4.1-19.11.4.7(EMI/EMC), Cl 32 Radiation, toxicity and similar hazards

IS 17266 (2019)

Textiles – Viscose staple fibres – Specification

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.5(Commercial Mass)	-	40000	-
3.1(Oil Pickup Unit)	-	40000	-
3.2(Abnormal Fibre and Other Matters)	-	40000	-
4/4.1 Table 1.( REQUIREMENTS)	-	40000	-
4.3(Freedom from Defects)	-	40000	-
4.3.1( Dirt/Grease)	-	40000	-
4.3.2 (Damaged/Bumped Fibres)	-	40000	-
4.3.3(Finish Oil Contamination)	-	40000	-
4.3.4(Texture Colour/Appearance)	-	40000	-
4.3.5(Fluorescent Oil)	-	40000	-
4.3.6(Slubs/Loops/Kinks)	-	40000	-
4.3.7(None)	-	40000	-
4.5(Commercial Mass)	-	40000	-
3.1(Oil Pickup Unit)	-	40000	-
3.2(Abnormal Fibre and Other Matters)	-	40000	-
4/4.1 Table 1.( REQUIREMENTS)	-	40000	-
4.3(Freedom from Defects)	-	40000	-
4.3.1( Dirt/Grease)	-	40000	-
4.3.2 (Damaged/Bumped Fibres)	-	40000	-
4.3.3(Finish Oil Contamination)	-	40000	-
4.3.4(Texture Colour/Appearance)	-	40000	-
4.3.5(Fluorescent Oil)	-	40000	-
4.3.6(Slubs/Loops/Kinks)	-	40000	-
4.3.7(None)	-	40000	-
4.5(Commercial Mass)	-	40000	-
3.1(Oil Pickup Unit)	-	40000	-
3.2(Abnormal Fibre and Other Matters)	-	40000	-
4/4.1 Table 1.( REQUIREMENTS)	-	40000	-
4.3(Freedom from Defects)	-	40000	-
4.3.1( Dirt/Grease)	-	40000	-
4.3.2 (Damaged/Bumped Fibres)	-	40000	-
4.3.3(Finish Oil Contamination)	-	40000	-
4.3.4(Texture Colour/Appearance)	-	40000	-
4.3.5(Fluorescent Oil)	-	40000	-
4.3.6(Slubs/Loops/Kinks)	-	40000	-
4.3.7(None)	-	40000	-
4.5(Commercial Mass)	-	40000	-
3.1(Oil Pickup Unit)	-	40000	-
3.2(Abnormal Fibre and Other Matters)	-	40000	-
4/4.1 Table 1.( REQUIREMENTS)	-	40000	-
4.3(Freedom from Defects)	-	40000	-
4.3.2 (Damaged/Bumped Fibres)	-	40000	-
4.3.3(Finish Oil Contamination)	-	40000	-
4.3.4(Texture Colour/Appearance)	-	40000	-
4.3.5(Fluorescent Oil)	-	40000	-
4.3.6(Slubs/Loops/Kinks)	-	40000	-
4.3.7(None)	-	40000	-
4.5(Commercial Mass)	-	40000	-
3.1(Oil Pickup Unit)	-	40000	-
3.2(Abnormal Fibre and Other Matters)	-	40000	-
4/4.1 Table 1.( REQUIREMENTS)	-	40000	-
4.3(Freedom from Defects)	-	40000	-
4.3.1( Dirt/Grease)	-	40000	-
4.3.2 (Damaged/Bumped Fibres)	-	40000	-
4.3.3(Finish Oil Contamination)	-	40000	-
4.3.4(Texture Colour/Appearance)	-	40000	-
4.3.5(Fluorescent Oil)	-	40000	-
4.3.6(Slubs/Loops/Kinks)	-	40000	-
4.3.7()	-	40000	-
Cl-4.2, Table-1 (i)(Denier (1.2), Max)	-	40000	-
Cl-4.2, Table-1 (ii)(Conditional tenacity, gpd Min)	-	40000	-
Cl-4.2, Table-1 (iii)(Whiteness (berger), percent, Min)	-	40000	-
Cl-4.2, Table-1 (iv)(Length, mm)	-	40000	-
Cl-4.2, Table-1 (vi)(Spinning faults, (> 19 mm) Max)	-	40000	-
Cl-4.2, Table-1 (vi)(Shirley faults, mg/kg, Max)	-	40000	-
Cl-4.2, Table-1 (vii)(Moisture, percent)	-	40000	-
Cl-4.2, Table-1 (viii)(Oil pickup, percent)	-	40000	-
Cl-4.2, Table-1 (ix)(pH)	-	40000	-
4.3.1( Dirt/Grease)	-	40000	-

19 Jul, 2027

-
Included w.e.f 10.07.2025 Exclusion: Table 2 Additional Requirements for ECO-Mark (Optional)

IS 3566 (2023)

TEXTILES - VISCOSE RAYON CUT STAPLE SPUN YARN - SPECIFICATION (SECOND REVISION)

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(GENERAL REQUIREMENTS)	-	40000	-
5.1 Table 1 (i)(Count, Ne)	-	40000	-
5.1 Table 1 (ii)(Count CV, percent, Max)	-	40000	-
5.1 Table 1 (iii)(CSP, Min)	-	40000	-
5.1 Table 1 (iv)(Lea breaking load CV, Percent, Max)	-	40000	-
5.1Tble 1 (v)(Yarn tenacity, cN/tex, Min)	-	40000	-
5.1 Table 1 (vi)(Breaking elongation, percent, Min)	-	40000	-
5.1 Table 1 (vii)(Yarn tenacity CV percent, Max)	-	40000	-
5.1Table 1 (viii)(Unevenness, percent Max)	-	40000	-
5.1 Table 1 (ix)(Unevenness CV, percent, Max)	-	40000	-
5.1 Table 1 (x)(Hairiness index, Max)	-	40000	-
5.1 Table 1 (xi)(Imperfections/km, Max)	-	40000	-
5.2 Table 2 (i)(Count, Ne)	-	40000	-
5.2 Table 2 (ii)(Count CV, percent, Max)	-	40000	-
5.2 Table 2 (iii)(Twist per meter)	-	40000	-
5.2 Table 2 (iv)(CSP, Min)	-	40000	-
5.2 Table 2 (v)(Lea breaking load CV, Percent, Max)	-	40000	-
5.2 Table 2 (vi)(Yarn tenacity, cN/tex, Min)	-	40000	-
5.2 Table 2(vii)(Yarn tenacity CV, percent, Max)	-	40000	-
5.2 Table 2 (viii)(Breaking elongation percent, Min)	-	40000	-
5.2 Table 2 (ix)(Unevenness, percent Max)	-	40000	-
5.2 Table 2 (x)(Unevenness CV, percent, Max)	-	40000	-
5.2 Table 2 (xi)(Hairiness index, Max)	-	40000	-
5.2 Table 2(xii)(Imperfections/km, Max)	-	40000	-
5.3.2(The average resultant count of the multifold yarn)	-	40000	-
5.3.3(The lea breaking strength of multifold yarn)	-	40000	-
5.3.4(The ply twist in the multifold yarn)	-	40000	-
5.3.6(The requirement for hairiness index)	-	40000	-
7(MARKING)	-	40000	-
Cl-5.3, Table-1 (i) (Amendment No.1)(Count, Ne)	-	40000	-
Cl-5.3, Table-1 (ii) (Amendment No.1)(Count CV, percent, Max)	-	40000	-
Cl-5.3, Table-1 (iii) (Amendment No.1)(CSP, Min)	-	40000	-
Cl-5.3, Table-1 (iv) (Amendment No.1)(Lea breaking load CV, Percent, Max)	-	40000	-
Cl-5.3, Table-1 (v) (Amendment No.1)(Yarn tenacity, cN/tex, Min)	-	40000	-
Cl-5.3, Table-1 (vi) (Amendment No.1)(Yarn tenacity CV, percent, Max)	-	40000	-
Cl-5.3, Table-1 (vii) (Amendment No.1)(Breaking elongation, percent, Min)	-	40000	-
Cl-5.3, Table-1 (viii) (Amendment No.1)(Unevenness, percent, Max)	-	40000	-
Cl-5.3, Table-1 (ix) (Amendment No.1)(Unevenness CV, percent, Max)	-	40000	-
Cl-5.3, Table-1 (x) (Amendment No.1)(Hairiness index, Max)	-	40000	-
Cl-5.3, Table-1 (xi) (Amendment No.1)(Imperfections/km, Max)	-	40000	-

19 Jul, 2027

-
Included w.e.f 11.07.2025

IS 17263 (2022)

Textiles - Polyester staples fibres - Specification (first revision)

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Classification (IS 17263))	-	1000	-
5(Identification (IS 17263))	-	30000	-
6 & Table-3(Mean Linear Density (IS 234))	-	2000	-
6 & Table-3(Cut Length (IS 10014 Part-1))	-	2000	-
6 & Table-3(Average Elongation at Break (IS 235))	-	2000	-
6 & Table-3(Average Tenacity (IS 235))	-	2000	-
6 & Table-3(Hollowness (IS 17263))	-	2000	-
6 & Table-3(Crimp Reoval (For filing nonwoven Fiber Only) (IS 17263))	-	2000	-
6 & Table-3(Sinking Time (For spun lace fiber only)(IS 17263))	-	2000	-
6 & Table-4(Isophthalic Acid (IS 16481))	-	2000	-
6 & Table-4(Phosphorus Content (IS 17263))	-	2000	-
6 & Table-4(Ultraviolet Resistence (IS 13162 Part-2))	-	35000	-
6 & Table-4(Water Soluble Matter (IS 3456))	-	2000	-
6 & Table-4(Silicon Content (IS 17263))	-	2000	-
6 & Table-4(Colour strength with reference to standard shade (IS 17263))	-	2000	-
6 & Table-4(Colour difference with reference to standard shade (IS 17263))	-	2000	-
6 & Table-4(L Colour Value (IS 17263))	-	2000	-
6 & Table-4(Whiteness Index (IS 17263))	-	2000	-
6 & Table-4(Resistance to ageing (fibres in sheet form at 40ºC for 168 h) (IS 7016Part-8))	-	35000	-
6 & Table-4(Dry heat (hot air) shrinkage at 180ºC, for 30 min (IS 17263))	-	2000	-
Cl-6.5(Commercial Mass (IS 7703 Part-3))	-	2000	-
6.4 & Table 6(Colour Fastness to Light (IS/ISO 105-B01))	-	5500	-
6.4 & Table 6(Colour Fastness to Washing (IS/ISO 105-C10))	-	2500	-
6.4 & Table 6(Colour Fastness to Rubbing (IS/ISO 105-X12))	-	2500	-
6.4 & Table 6("Colour Fastness to Perspiration (acidic and alkaline) (IS/ISO 105-E04)")	-	2500	-
8(Marking (IS 17263))	-	1000	-
6.2(Freedom from Major Defects)	-	2500	-
6.4- Table -6, Sl no. 2 (a)(Washing, Change in colour IS/ISO 105-C10)	-	2000	-
6.4- Table -6, Sl no. 2 (b)(Washing, Staining IS/ISO 105-C11)	-	2000	-
6.4- Table -6, Sl no. 3 (a)(Rubbing, Dry IS/ISO 105-X12)	-	2000	-
6.4- Table -6, Sl no. 3 (b)(Rubbing, Wet IS/ISO 105-X13)	-	2000	-
6.4- Table -6, Sl no. 4 (a)(Perspiration (acidic and alkaline), chenge in colour IS/ISO 105-E04)	-	2000	-
6.4- Table -6, Sl no. 4 (b)(Perspiration (acidic and alkaline), staining IS/ISO 105-E05)	-	2000	-
6.1 Table 4(Moisture regain % Max at equilibrium condition)	-	2000	-
6.2 Table 4(Colour Strength with reference to standard yarn, %)	-	2000	-
6.1 Table 4(Phosphorus content)	-	2000	-
6.1 Table 4(Water soluble matter %)	-	2000	-
6.1 Table 4(Colour strength with reference to std shade %)	-	2000	-
6.1 Table 4(Colour difference with ref to std shade measured asDE)	-	2000	-
6.1 Table 4(L colour value %)	-	2000	-
6.1 Table 3(Sinking time, s)	-	2000	-
6.1 Table 4(Whiteness index)	-	2000	-
6.4 Table 6(Colour Fastness to light)	-	5500	-
6.4 Table 6(Colour Fastness to washing , test 2)	-	2500	-
6.4 Table 6(Colour Fastness to Rubbing)	-	2500	-
6.4 Table 6(Colour Fastness to perspiration)	-	2500	-
6.1 Table 3(Mean Linear Density ,Denier)	-	2000	-
6.1 Table 3(Cut Length)	-	2000	-
6.1 Table 3(Average elongation at break, %)	-	2000	-
6.1 Table 3(Average tenacity,gpd)	-	2000	-
6.1 Table 3(Hollowness, %)	-	2000	-
6.1 Table 3(Crimp removal %)	-	2000	-
6.1 Table 3(Sinking time,s)	-	2000	-
6 & Table-4(Moisture Regain (IS 17263))	-	2500	-
6.3(Lustre/Brightness)	-	5500	-

19 Jul, 2027

-
Included w.e.f.22.07.2025 Exclusion 6 & Table-4 (Anti Microbial activity Value) and Table 7

IS 17265 (2023)

Textiles 100 Percent Polyester Spun Grey and White Yarns Specification Second Revision

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.No. 4(CLASSIFICATIONS)	-	1000	-
Cl.No. 5.1, Table no. 1("Designation of Yarn ")	-	2000	-
Cl.No.5.2 , Table no. 2(IDENTIFICATION AND DESCRIPTION)	-	8000	-
Cl.No. 6.1,6.2,8.2. Table no. 3(i)(Mean linear density (Count))	-	2000	-
Cl.No. 6.1,6.2,8.2. Table no. 3(ii)(Twist per metre,)	-	2000	-
Cl.No. 6.1,6.2,8.2. Table no. 3(iii)(Average Single yarn tenacity)	-	2000	-
Cl.No. 6.1,6.2,8.2. Table no. 3(iv)(Elongation)	-	2000	-
Cl.No. 6.1,6.2,8.2. Table no. 3(v)(Average Count strength product (CSP))	-	2000	-
Cl.No. 6.1,6.2,8.2. Table no. 3(vi)(Yarn hairiness index)	-	2000	-
Cl.No. 6.1,6.2,8.2. Table no. 3(vii)(Whiteness index of polyester spun yarn)	-	2000	-
Cl.No. 6.1,6.2 Table no. 4(i)(Moisture regain)	-	2000	-
Cl.No. 6.1,6.2 Table no. 4(ii)(Isophthalic Acid (IPA) content)	-	2000	-
Cl.No. 6.1,6.2 Table no. 4(iii)(Water soluble matter)	-	2000	-
Cl.No. 6.1,6.2 Table no. 4(iv)(Phosphorus content)	-	2500	-
Cl.No. 6.1,6.2 Table no. 4(v)(Ultraviolet resistance)	-	5000	-
Cl.No. 6.1,6.2 Table no. 4(vii)("Wettability of woven or knitted fabrics (about 150 gsm) made from the yarns")	-	2000	-
Cl.No. 6.1,6.2,8.2. Table no. 4(viii)("Wicking characteristic of woven or knitted fabrics (about 150 gsm) made from the yarn")	-	2000	-
Cl.No. 6.3(Freedom from Yarn Defects)	-	2000	-
Cl.No. 6.4, Table no. 5(Yarn Unevenness and Yarn Imperfections)	-	2000	-
Cl.No. 6.5,(Objectionable Faults)	-	2000	-
Cl.No. 6.6(Commercial Mass)	-	2000	-
Cl.No. 6.7, Table no. 7(i)("Light ")	-	2000	-
Cl.No. 6.7, Table no. 7(ii)(Washing)	-	2000	-
Cl.No. 6.7, Table no. 7(iii)(Rubbing)	-	2000	-
Cl.No. 6.7, Table no. 7(iv)(Perspiration)	-	3000	-
Cl.No.8(MARKING)	-	1000	-
Cl- 6.2.3(Lea breaking strength of folded yarn)	-	2000	-
Cl-6.2.4(Ply twist)	-	2000	-

19 Jul, 2027

-
Included w.e.f.22.07.2025 Excluding Cl. 6.1 6.2 Table 4 (vi) Antimicrobial activity value and Table 8

IS 17264 (2022)

Textiles - Polyester industrial yarn - Specification (first revision)

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Designation of Yarn (IS 17264))	-	5500	-
1(Microscopic and dissolution (IS 667))	-	30000	-
5.2.1 a(melting point)	-	2000	-
5.2.1 b(Staining Test (IS 667))	-	3000	-
5.2.2 & Table-1(Classification (IS 17264))	-	1000	-
5.2.2 & Table-1(Identification)	-	30000	-
6.3(Freedom from defects (IS 17264))	-	2500	-
6.1 & Table-3(Linear Density (IS 7703 Part-1))	-	2000	-
6.1 & Table-3(Tenacity (IS 7703 Part-2))	-	2000	-
6.1 & Table-3(Elongation (IS 7703 Part-2))	-	2000	-
6.1 & Table-3(Hot Air Shrinkage (IS 17264))	-	2000	-
6.2 & Table-4(Moisture regain (IS 17264))	-	2000	-
6.2 & Table-4(Isophthalic acid (IPA) content (IS 16481))	-	2000	-
6.2 & Table-4(Water soluble matter (IS 3456))	-	2000	-
6.2 & Table-4(Finish oil pick-up (IS 17264))	-	2000	-
6.2 & Table-4(Phosphorus content (IS 17264))	-	2000	-
6.2 & Table-4(Ultraviolet resistance (IS 13162 Part-2))	-	30000	-
6.2 & Table-4(Colour strength with reference to standard yarn (IS 17264))	-	2000	-
6.2 & Table-4(Colour difference with reference to standard yarn, measured as ΔE (IS 17264))	-	2000	-
6.4 & Table-5(Colour Fastness Rating to light (IS/ISO 105-B01))	-	5500	-
6.4 & Table-5(Colour Fastness Rating to Rubbing (IS/ISO 105-X12))	-	3000	-
8(Marking (IS 17264))	-	1000	-
5.2(Identification and Description, Annex J of IS 16481 & IS 667)	-	30000	-
6.4- Table -5, Sl no. 2 (a)(Rubbing, Dry IS/ISO 105-X12)	-	3000	-
6.4- Table -5, Sl no. 2 (b)(Rubbing, Wet IS/ISO 105-X13)	-	3000	-
6.5(Commercial mass)	-	2000	-
6.2 Table 4(Finish Oil Pickup)	-	2000	-
6.2 Table 4(Phosporus content)	-	2000	-
6.2 Table 4(Colour strength with reference to std yarn %)	-	2000	-
6.4 Table 5(Colour Fastness to Rubbing)	-	3000	-
6.1 Table 3(Linear Density, Denier (dtex))	-	2000	-
6.1 Table 3(Tenacity,gpd (cN/dtex))	-	2000	-
6.1 Table 3(Elongation %)	-	2000	-
6.1 Table 3(Hot Air Shrinkage %)	-	2000	-

19 Jul, 2027

-
Included w.e.f.22.07.2025 Excluding Table 6

IS 17262 (2022)

Textiles - Polyester partially oriented yarn (POY) - Specification (first revision)

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2(Identification and Description, Annex J of IS 16481 & IS 667)	-	5500	-
6.1 & 8.2 - Table -3, Sl no. 1(Nominal linear density, denier, IS 7703 (Part 1))	-	2000	-
6.1 & 8.2 - Table -3, Sl no. 2(Cross section)	-	2000	-
6.1 & 8.2 - Table -3, Sl no. 3(No. of filaments)	-	2000	-
6.1 & 8.2 - Table -3, Sl no. 4(Declared average tenacity, gpd, IS 7703 (Part 2))	-	2000	-
6.1 & 8.2 - Table -3, Sl no. 5(Declared elongation, percent, IS 7703 (Part 2))	-	2000	-
6.1 & 8.2 - Table -3, Sl no. 6(Interlace as nips per metre, Annex B)	-	2000	-
6.1 & 8.2 - Table -3, Sl no. 7(Unevenness of linear density, IS 7703 (Part 5))	-	9500	-
6.2- Table -4, Sl no. 1(Moisture regain, percent, Annex C)	-	2000	-
6.2- Table -4, Sl no. 2(Isophthalic acid (IPA) content in Virgin polyester yarn, Percent, Annex C of IS 16481)	-	2000	-
6.2- Table -4, Sl no. 2(Isophthalic acid (IPA) content in Dope dyed/white yarn, Percent, Annex C of IS 16482)	-	2000	-
6.2- Table -4, Sl no. 2(Isophthalic acid (IPA) content in Recycled polyester yarn, Percent, Annex C of IS 16483)	-	2000	-
6.2- Table -4, Sl no. 3(Water soluble matter, Percent, IS 3456)	-	2000	-
6.2- Table -4, Sl no. 4(Finish oil pick-up, percent, Annex D)	-	2000	-
6.2- Table -4, Sl no. 5(Phosphorus content, percent, Annex E)	-	2000	-
6.2- Table -4, Sl no. 6(Ultraviolet resistance, 500 h Percent retained strength, IS 13162 (Part 2))	-	5000	-
6.2- Table -4, Sl no. 8(Colour strength with reference to standard yarn, Percent, Annex F)	-	2000	-
6.2- Table -4, Sl no. 9(Colour difference with reference to standard yarn, measured as ΔE, Annex F)	-	2000	-
6.3(Freedom from Yarn Defects)	-	2000	-
6.4(Lustre/Brightness)	-	3500	-
6.5- Table -6, Sl no. 1(Light, Change in colour, IS/ISO 105-B01 or IS/ISO 105-B02)	-	5500	-
6.5- Table -6, Sl no. 2(Washing,IS/ISO 105-C10)	-	2500	-
6.5- Table -6, Sl no. 3(Rubbing, IS/ISO 105-X12)	-	2500	-
6.5- Table -6, Sl no. 4(Perspiration (acidic and alkaline), IS/ISO 105-E04)	-	2500	-
6.1 & 8.2 - Table -3, Sl no. 7 (a)(All deniers except microdeniers)	-	1000	-
6.1 & 8.2 - Table -3, Sl no. 7 (b)(Microdeniers)	-	1000	-
6.1 & 8.2 - Table -3, Sl no. 7 ©(Dope dyed (all deniers))	-	1000	-
6.3(Freedom from Yarn Defects)	-	1000	-
6.4(Lustre/Brightness)	-	1000	-
6.5(Colour Fastness Properties of Dyed POY)	-	1000	-
6.1 Table -3, Sl no. 1(Nominal linear density, denier, IS 7703 (Part 1))	-	1000	-
6.1 Table -3, Sl no. 2(Cross section)	-	1000	-
6.1 & 8.2 - Table -3, Sl no. 1(Nominal linear density, denier, IS 7703 (Part 1))	-	1000	-
6.1 & 8.2 - Table -3, Sl no. 2(Cross section)	-	1000	-
6.1 & 8.2 - Table -3, Sl no. 2(Cross section)	-	1000	-
6.1 & 8.2 - Table -3, Sl no. 3(No. of filaments)	-	1000	-
6.1 & 8.2 - Table -3, Sl no. 4(Declared average tenacity, gpd, IS 7703 (Part 2))	-	1000	-
6.1 & 8.2 - Table -3, Sl no. 5(Declared elongation, percent, IS 7703 (Part 2))	-	1000	-
6.1 & 8.2 - Table -3, Sl no. 6(Interlace as nips per metre, Annex B)	-	1000	-
6.5- Table -6, Sl no. 2 (a)(Washing, Change in colour IS/ISO 105-C10)	-	1000	-
6.5- Table -6, Sl no. 2 (b)(Washing, Staining IS/ISO 105-C11)	-	1000	-
6.5- Table -6, Sl no. 3 (a)(Rubbing, Dry IS/ISO 105-X12)	-	1000	-
6.5- Table -6, Sl no. 3 (b)(Rubbing, Wet IS/ISO 105-X13)	-	1000	-
6.5- Table -6, Sl no. 4 (a)(Perspiration (acidic and alkaline), chenge in colour IS/ISO 105-E04)	-	1000	-
6.5- Table -6, Sl no. 4 (b)(Perspiration (acidic and alkaline), staining IS/ISO 105-E05)	-	1000	-
6.6(Commercial mass)	-	1000	-
6.4 Table 5(Colour Fastness to Light)	-	1000	-
6.2 Table 4(Finish Oil Pickup, %)	-	1000	-
6.2 Table 4(Colour difference with reference to srtandard yarn, measured as DE)	-	1000	-
6.5 Table 6(Colour Fastness to light)	-	1000	-
6.5 Table 6(Colour Fastness to Rubbing)	-	1000	-
6.5 Table 6(Colour Fastness to perspiration)	-	1000	-
6.5 Table 6(Colour Fastness to perspiration)	-	1000	-
6.1 Table 3(Colour Fastness to washing , test 2)	-	1000	-
6.1 Table 3(Nominal Linear Density,denier)	-	1000	-
6.1 Table 3(Cross Section)	-	1000	-
6.1 Table 3(No of Filaments)	-	1000	-
6.1 Table 3(Average Tenacity,gpd)	-	1000	-
6.1 Table 3(Elongation ,Percent,Average)	-	1000	-
6.1 Table 3(Interlace as nips per meter)	-	1000	-
6.1 Table 3(Unevenness ,U Percent)	-	1000	-
6.1 Table 4(Water soluble matter %)	-	1000	-

19 Jul, 2027

-
Included w.e.f.22.07.2025 Excluding Cl. 6.2 Table 4 Antimicrobial activity value and Table 7

IS 17261 (2022)

Textiles - Polyester continuous filament fully drawn yarns - Specification (first revision)

Textiles — Viscose Rayon Cut Staple(Spun) Yarn

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Classification (IS 17261))	-	1000	-
5(Designation ( IS 17261))	-	6000	5.2.1 a) 2000/- 5.2.1 b) 2000/- 5.2.2) 2000/-
6.1 & Table-3(Linear Density)	-	2000	-
6.1 & Table-3(Uneveness U)	-	9000	-
6.1 & Table-3(Tenacity)	-	2000	-
6.1 & Table-3(Elongation)	-	2000	-
6.2 & Table-4(Moisture regain ( IS17261))	-	2000	-
6.2 & Table-4(Isophthalic acid (IPA) content (IS 16481))	-	5000	-
6.2 & Table-4(Water soluble matter (IS 3456))	-	2000	-
6.2 & Table-4(Finish oil pick-up ( IS17261))	-	2000	-
6.2 & Table-4(Phosphorus content ( IS17261))	-	2000	-
6.2 & Table-4(Ultraviolet resistance (IS 13162 (Part-2))	-	5000	-
6.2 & Table-4(Ultraviolet resistance (IS 13162 (Part-2))	-	5000	-
6.2 & Table-4(Colour strength with reference to standard yarn ( IS17261))	-	2000	-
6.2 & Table-4(Colour difference with reference to standard yarn, measured as ΔE ( IS17261))	-	2000	-
6.3(Freedom From Defects)	-	1000	-
6.5 & Table-6(Colour Fastness Rating To Light Change in colour)	-	5000	-
6.5 & Table-9(Colour Fastness Rating To Rubbing Dry)	-	2500	-
6.5 & Table-10(Colour Fastness Rating To Rubbing Wet)	-	2500	-
6.5 & Table-11(Colour Fastness Rating To Perspiration (acidic and alkaline) Change in colour)	-	2500	-
6.5 & Table-12(Colour Fastness Rating To Perspiration (acidic and alkaline) Staining)	-	2500	-
8(Marking (IS 17261))	-	1000	-
5.2(Identification and Description, Annex J of IS 16481 & IS 667)	-	2500	-
6.1 Table -3(Boiling water shrinkage, IS 17087)	-	2500	-
6.1 Table -3(Interlace as nips per metre, Annex B of IS 17262)	-	2000	-
6.1 Table -3(No. of filaments in multifilament yarn)	-	2000	-
6.2- Table -4, Sl no. 2 (a)(Isophthalic acid (IPA) content in Virgin polyester yarn, Percent, Annex C of IS 16481)	-	5000	-
6.2- Table -4, Sl no. 2 (b)(Isophthalic acid (IPA) content in Dope dyed/white yarn, Percent, Annex C of IS 16482)	-	5000	-
6.2- Table -4, Sl no. 2 (c)(Isophthalic acid (IPA) content in Recycled polyester yarn, Percent, Annex C of IS 16483)	-	5000	-
6.6(Commercial Mass, IS 7703)	-	2000	-
6.5 Table 6(Colour Fastness to Light)	-	5000	-
6.5 Table 6(Colour Fatness to Washing, Test 2)	-	2500	-
6.5 Table 6(Colour Fastness to Rubbing)	-	2500	-
6.5 Table 6(Colour Fastness to perspiration)	-	2500	-
6.2 Table 4(Moisture Regain , %)	-	2000	-
6.2 Table 4(Water soluble matter %)	-	2000	-
6.2 Table 4(Finish oil pickup, %)	-	2000	-
6.2 Table 4(Phosphorus content , %)	-	2000	-
6.2 Table 4(Phosphorus content , %)	-	2000	-
6.2 Table 4(Colour strength with refernce to standard yarn, %)	-	2000	-
6.2 Table 4(Colour difference with referece standard yarn, measure as DE)	-	2000	-
6.1 Table 3(Linear Density ,Denier (dtex))	-	2000	-
6.1 Table 3(Unevenness ,(U %))	-	9500	-
6.1 Table 3(Tenacity,gpd (cN/dtex))	-	2000	-
6.1 Table 3(Elongation %)	-	2000	-
6.1 Table 3(Boiling Water Shrinkage %)	-	2000	-
6.5 & Table-7(Colour Fastness Rating To Washing Change in colour)	-	2000	-
6.5 & Table-8(Colour Fastness Rating To Washing Staining)	-	2000	-
4(Classification (IS 17261))	-	1000	-
5(Designation ( IS 17261))	-	6000	-
6.1 & Table-3(Linear Density)	-	2000	-
6.1 & Table-3(Uneveness U)	-	9000	-
6.1 & Table-3(Tenacity)	-	2000	-
6.1 & Table-3(Elongation)	-	2000	-
6.2 & Table-4(Moisture regain ( IS17261))	-	2000	-
6.2 & Table-4(Isophthalic acid (IPA) content (IS 16481))	-	5000	-
6.2 & Table-4(Water soluble matter (IS 3456))	-	2000	-
6.2 & Table-4(Finish oil pick-up ( IS17261))	-	2000	-
6.2 & Table-4(Phosphorus content ( IS17261))	-	2000	-
6.2 & Table-4(Ultraviolet resistance (IS 13162 (Part-2))	-	5000	-
6.2 & Table-4(Ultraviolet resistance (IS 13162 (Part-2))	-	5000	-
6.2 & Table-4(Colour strength with reference to standard yarn ( IS17261))	-	2000	-
6.2 & Table-4(Colour difference with reference to standard yarn, measured as ΔE ( IS17261))	-	2000	-
6.3(Freedom From Defects)	-	1000	-
6.5 & Table-6(Colour Fastness Rating To Light Change in colour)	-	5000	-
6.5 & Table-9(Colour Fastness Rating To Rubbing Dry)	-	2500	-
6.5 & Table-10(Colour Fastness Rating To Rubbing Wet)	-	2500	-
6.5 & Table-11(Colour Fastness Rating To Perspiration (acidic and alkaline) Change in colour)	-	2500	-
6.5 & Table-12(Colour Fastness Rating To Perspiration (acidic and alkaline) Staining)	-	2500	-
8(Marking (IS 17261))	-	1000	-
5.2(Identification and Description, Annex J of IS 16481 & IS 667)	-	2500	-
6.1 Table -3(Boiling water shrinkage, IS 17087)	-	2500	-
6.1 Table -3(Interlace as nips per metre, Annex B of IS 17262)	-	2000	-
6.1 Table -3(No. of filaments in multifilament yarn)	-	2000	-
6.2- Table -4, Sl no. 2 (a)(Isophthalic acid (IPA) content in Virgin polyester yarn, Percent, Annex C of IS 16481)	-	5000	-
6.2- Table -4, Sl no. 2 (b)(Isophthalic acid (IPA) content in Dope dyed/white yarn, Percent, Annex C of IS 16482)	-	5000	-
6.2- Table -4, Sl no. 2 (c)(Isophthalic acid (IPA) content in Recycled polyester yarn, Percent, Annex C of IS 16483)	-	5000	-
6.6(Commercial Mass, IS 7703)	-	2500	-
6.5 Table 6(Colour Fastness to Light)	-	5000	-
6.5 Table 6(Colour Fatness to Washing, Test 2)	-	2500	-
6.5 Table 6(Colour Fastness to Rubbing)	-	2500	-
6.5 Table 6(Colour Fastness to perspiration)	-	5000	-
6.2 Table 4(Moisture Regain , %)	-	2000	-
6.2 Table 4(Water soluble matter %)	-	2000	-
6.2 Table 4(Finish oil pickup, %)	-	2000	-
6.2 Table 4(Phosphorus content , %)	-	2000	-
6.2 Table 4(Phosphorus content , %)	-	2000	-
6.2 Table 4(Colour strength with refernce to standard yarn, %)	-	2000	-
6.2 Table 4(Colour difference with referece standard yarn, measure as DE)	-	2000	-
6.1 Table 3(Linear Density ,Denier (dtex))	-	2000	-
6.1 Table 3(Unevenness ,(U %))	-	9000	-
6.1 Table 3(Tenacity,gpd (cN/dtex))	-	2000	-
6.1 Table 3(Elongation %)	-	2000	-
6.1 Table 3(Boiling Water Shrinkage %)	-	2500	-
6.5 & Table-7(Colour Fastness Rating To Washing Change in colour)	-	2500	-
6.5 & Table-8(Colour Fastness Rating To Washing Staining)	-	2500	-
6.4 & Table-5(Lustre/Brightness TiO2 Content)	-	2500	-

19 Jul, 2027

-
Included w.e.f.22.07.2025 Excluding Cl. 6.2 Table 4 Antimicrobial activity value. Table 7 (mention all)

IS 9873 : Part 1 (2019)

Safety of toys: Part 1 safety aspects related to mechanical and physical properties (Fourth Revision)

Electric & Non-Electric Toys

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 - 5.24.2( Reasonably foreseeable abuse -Drop Test)	-	200	-
4.2 - 5.24.3( Reasonably foreseeable abuse -Tip-over test for large and bulky toys)	-	200	-
4.2 - 5.24.4( Reasonably foreseeable abuse -Dynamic strength test for wheeled ride-on toys other than toy scooters)	-	200	-
4.2 - 5.24.5( Reasonably foreseeable abuse -Torque test)	-	200	-
4.2 - 5.24.6.2( Reasonably foreseeable abuse -Tension test for seams in soft-filled (stuffed) toys. beanbag-type toys, and other similar filled toys)	-	200	-
4.2 - 5.24.6.3( Reasonably foreseeable abuse -Tension test for pompoms)	-	200	-
4.2 - 5.24.6.4( Reasonably foreseeable abuse -Tension test for protective components)	-	200	-
4.2 - 5.24.6.5( Reasonably foreseeable abuse -Tension test for a projectile with a suction cup)	-	200	-
4.2 - 5.24.7( Reasonably foreseeable abuse -Compression test)	-	200	-
4.2 - 5.24.8.2( Reasonably foreseeable abuse-Flexure test-Wires and other metallic components intended to be bent)	-	200	-
4.2 - 5.24.8.3( Reasonably foreseeable abuse -Flexure test-Wires likely to be bent)	-	200	-
4.3.2 - 5.21( Expanding materials)	-	2000	-
4.4.1 - 5.2(Small parts-For children under 36 months)	-	200	-
4.4.2 - 5.2(Small parts-For children 36 months and over but under 72 months )	-	200	-
4.5.1.2 - 5.3(Shape, size and strength of certain toys-Squeeze toys, rattles, and certain other toys and components of toys-Test for shape and size of certain toys)	-	200	-
4.5.1.3 - 5.3(Shape, size and strength of certain toys-Other toys or components of toys with nearly spherical, hemispherical, circular flared, or dome-shaped ends of toys having a mass less than 0,5 kg and intended for children under 18 months-Test for shape and size of certain toys)	-	200	-
4.5.1.4 - 5.3(Shape, size and strength of certain toys-Toy fasteners (e.g. nails, bolts, screws, and pegs) with nearly spherical, hemispherical, or dome-shaped ends intended for children 18 months and over but under 48 months-Test for shape and size of certain toys)	-	200	-
4.5.2 - 5.4(Shape, size and strength of certain toys-Small balls-Small balls test)	-	200	-
4.5.3 - 5.5(Shape, size and strength of certain toys-Pompoms-Test for pompoms)	-	200	-
4.5.4 - 5.6(Shape, size and strength of certain toys- Pre-school play figures-Test for pre-school play figures)	-	200	-
4.5.5(Shape, size and strength of certain toys-Toy pacifiers-Nipple length)	-	200	-
4.5.6(Shape, size and strength of certain toys-Balloons)	-	200	-
4.5.7(Shape, size and strength of certain toys-Marbles)	-	200	-
4.5.8 - a(Shape, size and strength of certain toys-Hemispheric-shaped toys-No of Opening)	-	200	-
4.5.8 - a(Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening in Base)	-	200	-
4.5.8 - b(Shape, size and strength of certain toys-Hemispheric-shaped toys-Extension of divider)	-	200	-
4.5.8 - c(Shape, size and strength of certain toys-Hemispheric-shaped toys-No of Opening)	-	200	-
4.5.8 - c(Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening )	-	200	-
4.5.8 - d(Shape, size and strength of certain toys-Hemispheric-shaped toys)	-	200	-
4.5.8 - d(Shape, size and strength of certain toys-Hemispheric-shaped toys-The maximum distance between centrelines of adjacent peaks )	-	200	-
4.5.8 - d(Shape, size and strength of certain toys-Hemispheric-shaped toys-Minimum depth)	-	200	-
4.6.1 a - 5.8(Edges-Accessible sharp edges of glass or metal-Sharp edge test)	-	200	-
4.6.1 b(Edges-Accessible sharp edges of glass or metal- gap between the edge and the adjacent surface)	-	200	-
4.6.2(Edges-Functional sharp edges)	-	200	-
4.6.3 - 5.8(Edges-Edges on metal toys-Sharp edge test)	-	200	-
4.6.4( Edges-Edges on moulded toys)	-	200	-
4.6.5( Edges-Edges on exposed bolts or threaded rod)	-	200	-
4.7.1 - 5.9(Points-Accessible sharp points-sharp-point test)	-	200	-
4.7.2 - a(Points-Functional sharp points)	-	200	-
4.7.2 - b(Points-Functional sharp points)	-	200	-
4.7.3 (Wooden toys)	-	200	-
4.8.1(Projections-General requirments)	-	200	-
4.9(a) - 5.24.8.2( Metal wires and rods-wires and other metallic components intended to be bent)	-	200	-
4.9(b) - 5.24.8.3( Metal wires and rods-wires likely to be bent)	-	200	-
4.9 - c( Metal wires and rods)	-	200	-
4.9 - c - 5.8( Metal wires and rods-Sharp edge test)	-	200	-
4.9 - c - 5.9( Metal wires and rods-Sharp Point test)	-	200	-
4.9 - c( Metal wires and rods-Minimum dia of spokes)	-	200	-
4.10(a) - 5.10(Plastic film or plastic bags in packaging and in toys-average thickness)	-	200	-
4.10(a) - 5.10(Plastic film or plastic bags in packaging and in toys- individual thickness)	-	200	-
4.11.2.1(a) - 5.11.2( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-Length of cords and electrical cables)	-	200	-
4.11.2.1(b) - 5.11.3( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-breakaway feature separation test)	-	200	-
4.11.2.1(b) - 5.11.2( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-Length of cords and electrical cables after breakaway feature separation test)	-	200	-
4.11.2.2 - 5.11.2( Cords-Cords in toys intended for children under 18 months--Other cords-free length )	-	200	-
4.11.3.3 ( Cords-Cords in toys intended for children 18 months and over but under 36 months-Other cords without a free end )	-	200	-
4.11.3.2( Cords-Cords in toys intended for children 18 months and over but under 36 months-Other cords)	-	200	-
4.11.4(a) - 5.11.4.1(Cords-Fixed loops and nooses intended for children under 36 months-Test for fixed loops and nooses-Head probe push test)	-	200	-
4.11.4(a) - 5.11.4.2(Cords-Fixed loops and nooses intended for children under 36 months-Test for fixed loops and nooses-Elastic materials)	-	200	-
4.11.4(b) - 5.11.3(Cords-Fixed loops and nooses intended for children under 36 months-Breakaway feature separation test)	-	200	-
4.11.5 - 5.11.2(Cords-Cords on pull toys-free length)	-	200	-
4.11.6(Cords- Electrical cables)	-	500	-
4.11.7 - 5.11.1(Cords- Diameter of certain cords intended for children under 36 months-cords cross-sectional dimension)	-	200	-
4.11.8 - 5.11.5(Cords- Self-retracting cords intended for children under 36 months-self-retracting cords)	-	200	-
4.11.9.1(Cords-Toys intended to be strung across a cradle, cot, perambulator or carriage)	-	200	-
4.11.9.2 (Cords-Toys otherwise intended to be attached to a cradle, cot, perambulator or carriage)	-	200	-
4.11.10(Cords-Cords on toy bags)	-	200	-
4.11.11 - 5.11.6( Cords, strings and lines for flying toys- electrical resistance)	-	200	-
4.11.11( Cords, strings and lines for flying toys- )	-	200	-
4.12.1(a - 1)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	200	-
4.12.1(a - 2)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	200	-
4.12.1(a - 3) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys-toy pushchairs and perambulators)	-	200	-
4.12.2 (a) - 5.22.3(Folding mechanisms-Other toys with folding mechanisms)	-	500	-
4.12.1(a - 4)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.12.3(Folding mechanisms-Hinge line clearance)	-	500	-
4.13.1(Holes, clearances and accessibility of mechanisms-Circular holes in rigid materials)	-	500	-
4.13.2 (Holes, clearances and accessibility of mechanisms-Accessible clearances for movable segments)	-	500	-
4.13.3(Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys)	-	500	-
4.13.3 - 5.7(Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys-accessibility of a part or component)	-	500	-
4.13.3(Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys)	-	500	-
4.13.4(Holes, clearances and accessibility of mechanisms-Other driving mechanisms)	-	500	-
4.13.5(Holes, clearances and accessibility of mechanisms-Winding keys)	-	500	-
4.14(a)(Springs)	-	500	-
4.14(b)(Springs)	-	500	-
4.14(c)(Springs)	-	500	-
4.15.1.1 - 5.12.2( Stability and overload requirements-Stability of ride-on toys and seats-Sideways stability, feet available for stabilization)	-	500	-
4.15.1.2 - 5.12.3( Stability and overload requirements-Stability of ride-on toys and seats-Sideways stability, feet unavailable for stabilization)	-	500	-
4.15.1.3 - 5.12.4( Stability and overload requirements-Stability of ride-on toys and seats-Fore and aft stability Test)	-	500	-
4.15.2 - 5.12.5( Stability and overload requirements-Overload requirements for ride-on toys and seats-overload test for ride-on toys and seats)	-	500	-
4.15.2 - 5.24.4( Stability and overload requirements-Overload requirements for ride-on toys and seats-dynamic strength test for wheeled ride-on toys other than toy scooters)	-	500	-
4.15.3 - 5.12.6( Stability and overload requirements-Stability of stationary floor toy-Stability test of stationary floor toys)	-	500	-
4.16.1(Enclosures-Ventilation)	-	500	-
4.16.2.1 - 5.13.1(Enclosures-Closures-Lids, doors and similar devices-Test For closures)	-	500	-
4.16.2.2(a)(Enclosures-Closures-Lid support for toy chests and similar toys)	-	500	-
4.16.1(Enclosures-Ventilation-No of openings)	-	500	-
4.16.1(Enclosures-Ventilation-Area of Each openings(If two openings))	-	500	-
4.16.1(Enclosures-Ventilation-Distance between openings(If two openings))	-	500	-
4.16.1(Enclosures-Ventilation-Area of Each openings(If One opening))	-	500	-
4.16.2.2(a) - 5.13.2.1(Enclosures-Closures-Lid support for toy chests and similar toys-Test For lid support)	-	500	-
4.16.2.2(a) - 5.13.2.2(Enclosures-Closures-Lid support for toy chests and similar toys- After durability test for toy chest lids)	-	500	-
4.16.2.2(a) - 5.13.2.2(Enclosures-Closures-Lid support for toy chests and similar toys-Test For lid support After durability test for toy chest lids)	-	500	-
4.16.2.2(b) - 5.13.2.2(Enclosures-Closures-Lid support for toy chests and similar toys-durability test for toy chest lids)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 1)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 2)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 3) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys-toy pushchairs and perambulators)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 4)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 5) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(b - 1)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(b - 2) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(b - 3) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.2 (a) - 5.22.3(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Other toys with folding mechanisms)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.2 (b)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Other toys with folding mechanisms)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.3(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Hinge line clearance)	-	500	-
4.16.2.2(d)(Enclosures-Closures-Lid support for toy chests and similar toys)	-	500	-
4.16.3(Enclosures-Toys that enclose the head)	-	500	-
4.16.3(Enclosures-Toys that enclose the head-No of openings)	-	500	-
4.16.3(Enclosures-Toys that enclose the head-Area of Each openings(If two openings))	-	500	-
4.16.3(Enclosures-Toys that enclose the head-Distance between openings(If two openings))	-	500	-
4.17 - 5.14(Simulated protective equipment, such as helmets, hats and goggles-Impact test for toys that cover the face)	-	500	-
4.17(Simulated protective equipment, such as helmets, hats and goggles)	-	500	-
4.18.2(a) - 5.36(Projectile toys-Projectiles-tip assessment of rigid projectiles)	-	500	-
4.18.2(b)(Projectile toys-Projectiles)	-	500	-
4.18.2(c)(Projectile toys-Projectiles)	-	500	-
4.18.2(c)(Projectile toys-Projectiles-Radius)	-	500	-
4.18.2(d) - 5.37(Projectile toys-Projectiles-length of suction cup projectiles)	-	500	-
4.18.2(d) - 5.37 - 5.24.5(Projectile toys-Projectiles-length of suction cup projectiles After torque test)	-	500	-
4.18.2(d) - 5.37 - 5.24.6.5(Projectile toys-Projectiles-length of suction cup projectiles After tension test for a projectile with a suction cup)	-	500	-
4.18.2 - e - 5.24.5(Projectile toys-Projectiles-torque test)	-	500	-
4.18.2 - e - 5.24.6.5(Projectile toys-Projectiles-tension test for a projectile with a suction cup)	-	500	-
4.18.3(a) - 5.2(Projectile toys-Projectile toys with stored energy-small parts test)	-	500	-
4.18.3(a) - 5.3 - 5.24(Projectile toys-Projectile toys with stored energy-small parts test after reasonably foreseeable abuse testing)	-	500	-
4.18.3(a) - 5.4(Projectile toys-Projectile toys with stored energy--small parts test after (wall impact test for projectiles)	-	500	-
4.18.3(b) - 5.15.1.3.3(Projectile toys-Projectile toys with stored energy-determination of kinetic energy per area of contact)	-	500	-
4.18.3(c ) - 5.24.5(Projectile toys-Projectile toys with stored energy-torque test)	-	500	-
4.18.3(c ) - 5.24.6.4(Projectile toys-Projectile toys with stored energy- tension test for protective components)	-	500	-
4.18.3(c )(Projectile toys-Projectile toys with stored energy)	-	500	-
4.18.3(d) - 5.15.2(Projectile toys-Projectile toys with stored energy-Wall impact test for projectiles)	-	500	-
4.18.3(e )(Projectile toys-Projectile toys with stored energystored energy-Discharge mechanism)	-	500	-
4.18.4.1 - 5.20(Projectile toys-Projectile toys without stored energy-Mouth-actuated projectile toys-durability of mouth-actuated toys)	-	500	-
4.18.4.2(a) - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-determination of the kinetic energy per area of contact when the contact area of the dart shall be at least 3 cm^2)	-	500	-
4.18.4.2(b)(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart)	-	500	-
4.18.4.2(c ) - 5.24.5(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After torque test)	-	500	-
4.18.4.2(c ) - 5.24.5(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-Contact area After torque test)	-	500	-
4.18.4.2(c ) - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After tension test for protective components)	-	500	-
4.18.4.3 - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)-kinetic energy per area)	-	500	-
4.18.4.6 - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-After tension test for protective components)	-	500	-
4.18.4.6 - 5.24.6.4 - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-kinetic energy per area After tension test for protective components)	-	500	-
4.19(Rotors and propellers)	-	500	-
4.2(Aquatic toys)	-	500	-
4.21(a)(Braking)	-	500	-
4.21(a)(Braking-brake performance for mechanically or electrically powered ride-on toys other than toy bicycles)	-	500	-
4.21(b)(braking)	-	500	-
4.22.1(Toy bicycles-Instructions for use)	-	500	-
4.22.2(Toy bicycles-Determination of maximum saddle height)	-	500	-
4.22.3 - 5.16.1(Toy bicycles-Braking requirements-determination of free-wheeling facility)	-	500	-
4.22.3 (Toy bicycles-Braking requirements- brake lever dimension(d))	-	500	-
4.22.3 (Toy bicycles-Braking requirements- lever Length(l))	-	500	-
4.22.3 - 5.16.3(Toy bicycles-Braking requirements- brake performance for toy bicycles)	-	500	-
4.23 - 5.17(Speed limitation of electrically driven ride-on toys-determination of speed of electrically driven ride-on toys)	-	5000	-
4.24(a) - 5.18(Toys containing a heat source-determination of temperature increases)	-	2000	-
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand-(Parts made of metals))	-	2000	-
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand(Parts made of glass or porcelain))	-	2000	-
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand(Parts made of Plastic or wood ))	-	2000	-
4.24(c) - 5.18(Toys containing a heat source- rise in temperature of other accessible parts of the toy(Parts made of metals))	-	2000	-
4.24(c) - 5.18(Toys containing a heat source- rise in temperature of other accessible parts of the toy( Parts made of other materials))	-	2000	-
4.25 - 5.19(Liquid-filled toys-leakage of liquid-filled toys)	-	500	-
4.25(Liquid-filled toys)	-	500	-
4.26(a) - 5.2( Mouth-actuated toys-small parts test)	-	500	-
4.26(b) - 5.24.5 - 5.3( Mouth-actuated toys-small parts test after torque test)	-	500	-
4.26(b) - 5.24.6.1 - 5.4( Mouth-actuated toys-small parts test after tension test, general procedure)	-	500	-
4.26(c ) - 5.20 - 5.2( Mouth-actuated toys-small parts test after durability of mouth-actuated toys)	-	500	-
4.27(Toy roller skates, toy inline skates and toy skateboards)	-	500	-
4.28( Percussion caps specifically designed for use in toys)	-	500	-
4.29(a) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	5000	-
4.29(b) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	5000	-
4.29(c) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	5000	-
4.29(d) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	5000	-
4.29(e) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	5000	-
4.29(f) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	5000	-
4.29(g) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	5000	-
4.30.2(Toy scooters-Warnings and instructions for use)	-	100	-
4.30.3 - 5.26 - 5.8(Toy scooters-Strength-After static strength for toy scooters- sharp edge test)	-	200	-
4.30.3 - 5.26 - 5.9(Toy scooters-Strength-static strength for toy scooters-sharp-point test)	-	200	-
4.30.3 - 5.26(Toy scooters-Strength-static strength for toy scooters)	-	200	-
4.30.3 - 5.27 - 5.8(Toy scooters-Strength-dynamic strength for toy scooters- sharp-edge test)	-	200	-
4.30.3 - 5.27(Toy scooters-Strength-dynamic strength for toy scooters)	-	200	-
4.30.3 - 5.29(Toy scooters-Strength-strength of toy scooter steering tubes)	-	5000	-
4.30.4 - 5.12.2(Toy scooters-Stability-sideways stability test, feet available for stabilization)	-	200	-
4.30.5(a)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	500	-
4.30.5(b)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	500	-
4.30.5(c)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	500	-
4.30.5(d)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	500	-
4.30.5(e)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	500	-
4.30.5(f) - 5.30( Toy scooters-Adjustable and folding steering tubes and handlebars-resistance to separation of handlebar)	-	500	-
4.30.6 ( Toy scooters-Braking)	-	500	-
4.30.6 - 5.28( Toy scooters-Braking- force required to hold the toy)	-	500	-
4.30.7( Toy scooters-Wheel size(diameter))	-	500	-
4.30.8(Toy scooters-Projections)	-	500	-
4.30.8(Toy scooters-Projections(rounded handlebar grips or plugs Diameter))	-	500	-
4.30.8(Toy scooters-Projections(rounded handlebar grips or plugs space from end))	-	500	-
4.31(Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over)	-	500	-
4.31.1 - 5.32(Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over-magnetic flux index)	-	500	-
4.31.1 - 5.2(Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over-small parts test)	-	500	-
4.31.2(a) - 5.32(Magnets and magnetic components-All other toys with magnets and magnetic components-magnetic flux index)	-	500	-
4.31.2(b) - 5.34 - 5.2(Magnets and magnetic components-All other toys with magnets and magnetic components-soaking test for magnets-small parts test)	-	500	-
4.31.2(c ) - 5.31 - 5.24.2 - 5.24.3 - 5.24.5 - 5.24.6.1 - 5.24.6.2 - 5.33 - 5.31 - 5.32(Magnets and magnetic components-All other toys with magnets and magnetic components-magnetic flux index After Following tests: -tension test for magnets; -drop test/tip over test for large and bulky toys; -torque test; -tension test, general procedure; -tension test for seams in soft-filled (stuffed) toys, beanbag-type toys and other similar filled toys, if applicable; -impact test for magnets; -compression test; -tension test for magnets;)	-	500	-
4.31.2(c ) - 5.31 - 5.24.2 - 5.24.3 - 5.24.5 - 5.24.6.1 - 5.24.6.2 - 5.33 - 5.31 - 5.2(Magnets and magnetic components-All other toys with magnets and magnetic components-small parts test After Following tests: -tension test for magnets; -drop test/tip over test for large and bulky toys; -torque test; -tension test, general procedure; -tension test for seams in soft-filled (stuffed) toys, beanbag-type toys and other similar filled toys, if applicable; -impact test for magnets; -compression test; -tension test for magnets;)	-	500	-
4.32 - 5.38.2( Yo-yo balls - length (lo) of the yo-yo ball tether)	-	500	-
4.32 - 5.38.1( Yo-yo balls - The ratio of the mass m (in grams) to the elastic constant k of the yo-yo ball tether(m/k))	-	500	-
4.33 - 5.11.3(Straps intended to be worn fully or partially around the neck-breakaway feature separation test)	-	500	-
4.34(Sledges and toboggans with cords for pulling)	-	500	-
4.35.3 - 5.39(Jaw entrapment in handles and steering wheels-jaw entrapment test)	-	500	-
9873 (Part - 2) 4.5 - 5.5(Soft-filled toys-Test for soft-filled toys )	-	2000	-
9873 (Part - 2) 4.5 - 5.5(Soft-filled toys-rate of spread of flame )	-	2000	For Single unit
9873 (Part - 2) 4.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	2000	For Single unit
9873 (Part - 2) 4.4 - 5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	2000	For Single unit
9873 (Part - 2) 4.4 - 5.4(Toys intended to be entered by a child-rate of spread of flame)	-	2000	For Single unit
9873 (Part - 2) 4.3(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play)	-	2000	For Single unit
9873 (Part - 9) 3(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	5000	For Single unit
9873 (Part - 9) 3(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	5000	For Single unit
9873 (Part - 9) 3(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	5000	For Single unit
9873 (Part - 9) 3(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	5000	For Single unit
9873 (Part - 3) 4.1 - Table 1(Selenium (Se) - Cl 7,8,9 )	-	3000	For Single unit
9873 (Part - 3) 4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 )	-	3000	For Single unit
9873 (Part - 3) 4.1 - Table 1(Lead (Pb) - Cl 7,8,9 )	-	3000	For Single unit
9873 (Part - 3) 4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 )	-	3000	For Single unit
9873 (Part - 3) 4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9)	-	3000	For Single unit
9873 (Part - 3) 4.1 - Table 1(Barium (Ba) - Cl 7,8,9 )	-	3000	For Single unit
9873 (Part - 3) 4.1 - Table 1(Arsenic (As) - Cl 7,8,9 )	-	3000	For Single unit
9873 (Part - 3) 4.1 - Table 1(Antimony (Sb) - Cl 7,8,9)	-	3000	For Single unit
5.24.6.1(Tension Test General procedure)	-	200	-
4.1(Normal use)	-	200	-
4.3.1(Material quality)	-	200	-
4.1(General)	-	200	-

19 Jul, 2027

-
-

IS 15298 : Part 2 (2024)

Personal Protective Equipment Part 2 Safety Footwear (ISO 20345 : 2021, MOD) (Third Revision)

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.2(Design)	-	1000	-
Cl 5.2.2, Table 4(" Height of upper ")	-	1000	-
Cl 5.2.3(Heel area)	-	1000	-
Cl 5.3.1.1(Construction of whole footwear)	-	1000	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	1000	-
Cl 5.3.2.1(Toe protection - general)	-	1000	-
Cl 5.3.2.2(Internal length)	-	1000	-
Cl 5.3.2.3(Width of toecap flange)	-	1000	-
Cl 5.3.2.4.1(Corrosion resistance of Class I footwear and hybrid mounted footwear)	-	1000	-
Cl 5.3.2.4.2(Corrosion resistance of Class II and hybrid moulded footwear)	-	1000	-
Cl 5.3.2.5(Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-	1000	-
Cl 5.3.2.6(Impact resistance)	-	1000	-
Cl 5.3.2.7(Compression resistance)	-	1000	-
Cl 5.3.3(Leak proofness)	-	1000	-
Cl 5.3.4("Specific ergonomic features ")	-	1000	-
Cl 5.3.5.2, Table 7(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	1000	-
Cl 5.3.6, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (x)(pH)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	1000	-
Cl 5.3.7(Seam strength)	-	1000	-
Cl 5.3.8(Lead Content ( National Annex A))	-	1000	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	1000	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	1000	-
Cl 5.4.2(Thickness)	-	1000	-
Cl 5.4.3(Tear strength)	-	1000	-
Cl 5.4.4, Table 11(Tensile properties- Tensile strength)	-	1000	-
Cl 5.4.4, Table 11(Tensile properties- Breaking Force)	-	1000	-
Cl 5.4.4, Table 11(Tensile properties-Modulus at 100 % elongation)	-	1000	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	1000	-
Cl 5.4.5(Flexing resistance)	-	1000	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	1000	-
Cl 5.4.7(Resistance to hydrolysis)	-	1000	-
Cl 5.5.2(Lining- Tear strength)	-	1000	-
Cl 5.5.3(Lining- Abrasion resistance)	-	1000	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	1000	-
Cl 5.6.2, Table 14(Tear strength of tongue)	-	1000	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	1000	-
Cl 5.7.2(Water permeability of insock)	-	1000	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	1000	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	1000	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	1000	-
Cl 5.8.2.1, Table 15(Thickness of Outsole)	-	1000	-
Cl 5.8.2.2(Cleated area)	-	1000	-
Cl 5.8.2.3(Cleat height)	-	1000	-
Cl 5.8.3(Outsole- Tear strength)	-	1000	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	1000	-
Cl 5.8.5(Outsole-Flexing resistance)	-	1000	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	1000	-
Cl 5.8.7(Interlayer bond strength)	-	1000	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	1000	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	1000	-
Personal protective equipment: Part 2 safety footwear(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	1000	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	1000	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	1000	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	1000	-
Cl 6.2.1.4.2.1(Corrosion resistance of perforation resistant metallic insert for Class I footwear and hybrid mounted footwear)	-	1000	-
Cl 6.2.1.4.2.2(Corrosion resistance of perforation resistant metallic insert for Class II footwear and hybrid moulded footwear)	-	1000	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	1000	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	1000	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	1000	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	1000	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	1000	-
Cl 6.2.5(Water resistance)	-	1000	-
Cl 6.2.4(Energy absorption of seat region)	-	1000	-
Cl 6.2.6.1(Metatarsal protection - Construction)	-	1000	-
Cl 6.2.6.2("Metatarsal protection-Impact resistance of metatarsal protective device ")	-	1000	-
Cl 6.2.7(Ankle protection)	-	1000	-
Cl 6.2.8.2(Cut resistance footwear- design)	-	1000	-
Cl 6.2.8.2(Dimensions and construction of protective area of Cut resistance footwear)	-	1000	-
Cl 6.2.8.3(Resistance to cutting)	-	1000	-
Cl 6.2.9(Scuff cap)	-	1000	-
Cl 6.2.10 , Table 19("Slip resistance on ceramic tile floor with glycerine ")	-	1000	-
Cl 6.3(Upper — Water penetration and absorption)	-	1000	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	1000	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	1000	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	1000	-
Cl 6.4.3.2(Design of Ladder grip)	-	1000	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	1000	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	1000	-
Cl 7, Table 20("Marking ")	-	1000	-

19 Jul, 2027

-
-

IS 15844 : Part 3 (2024)

Sports Footwear Part 3 Professional Sports Footwear

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6(Size and Fittings)	-	100	-
Cl-5(Design)	-	100	-
Cl-6(Size and Fittings)	-	100	-
Cl.7.1.1(Upper to Mid Sole/Out Sole, Upper to Composite Sole (Applicable Only When the Sole is Composite) and Out Sole to Mid Sole (Multilayer, if Present), Bond Performance)	-	1080	-
Cl.7.1.2(Energy Absorption at Seat Region)	-	700	-
Cl.7.1.1(Upper to Mid Sole/Out Sole, Upper to Composite Sole (Applicable Only When the Sole is Composite) and Out Sole to Mid Sole (Multilayer, if Present), Bond Performance)	-	1080	-
Cl.7.1.2(Energy Absorption at Seat Region)	-	700	-
Cl.7.1.3(Complete Shoe Flexing)	-	1500	-
Cl.7.1.4(Washability)	-	1000	-
Cl.7.1.5(Slip Resistance)	-	2500	-
Cl.7.1.6(Heel Drop)	-	180	-
Cl.7.2 Table-2 S.No- (i)("Flexing resistance, Min a) Dry condition b) Wet condition")	-	1500	-
Cl.7.2 Table-2 S.No- (ii)(Tear strength (average force), N, Min)	-	500	-
Cl.7.2 Table-2 S.No- (iii)("Colour fastness rubbing a-Dry b-Wet")	-	500	-
Cl.7.2 Table-2 S.No- (iv)("a) Water vapour permeability b) Water vapour coefficient")	-	700	-
Cl.7.2 Table-2 S.No- (v)(Stitch tear strength N/mm, Min)	-	500	-
Cl.7.2 Table-2 S.No- (vii)(Tensile strength)	-	250	-
Cl.7.2 Table-2 S.No- (viii)(Elongation at break, percent)	-	250	-
Cl.7.2 Table-2 S.No- (ix)("Abrasion test a) Dry b) Wet")	-	1350	-
Cl.7.2 Table-3 S.No- (i)(Breaking strength, N/mm, Min)	-	250	-
Cl.7.2 Table-3 S.No- (ii)(Elongation at break, percent, Min)	-	250	-
Cl.7.2 Table-3 S.No- (iii)(Tear strength, N, Min)	-	500	-
Cl.7.2 Table-3 S.No- (iv)(Strength at needle perforation)	-	600	-
Cl.7.2 Table-3 S.No- (v)("Flexing resistance a-Dry condition, b) Wet condition")	-	1500	-
Cl.7.2 Table-3 S.No- (vi)("a) Water vapour permeability b) Water vapour coefficient")	-	700	-
Cl.7.2 Table-3 S.No- (vii)(Hydrolysis resistance)	-	2700	-
Cl.7.2 Table-3 S.No- (ix)(Bursting strength)	-	1000	-
Cl.7.3 Table-4 S.No- (i)(Tear strength, N, Min)	-	500	-
Cl.7.3 Table-4 S.No- (ii)("Abrasion resistance, a) Dry b) Wet ")	-	500	-
Cl.7.3 Table-4 S.No- (iii)(Colour fastness to rubbing, grey scale rate with 10 rubs on dry or wet, Min)	-	300	-
Cl.7.3 Table-4 S.No- (iv)(Colour fastness to perspiration (contact method) grey scale rate, Min)	-	500	-
Cl.7.3 Table-4 S.No- (v)("a-Water vapour permeability b-Water vapour coefficient")	-	700	-
Cl.7.4 Table-5 S.No- (i)(Flexing index, Min)	-	800	-
Cl.7.4 Table-5 S.No- (ii)(Abrasion resistance)	-	1350	-
Cl.7.4 Table-5 S.No- (iii)("a) Water absorption b) Water desorption")	-	700	-
Cl.7.5 Table-6 S.No- (i)("Abrasion resistance a) Dry condition b) Wet condition")	-	1350	-
Cl.7.5 Table-6 S.No- (ii)("a) Water absorption b) Water desorption")	-	700	-
Cl.7.5 Table-6 S.No- (iii)(Heat resistance shrinkage linear, percent, Max)	-	1000	-
Cl.7.6 Table-7 S.No- (i)(Abrasion resistance)	-	1080	-
Cl.7.6 Table-7 S.No- (ii)("Flexing resistance a) Bennewart Method b) Ross flexing method")	-	1080	-
Cl.7.6 Table-7 S.No- (iii)(Hydrolysis resistance)	-	2700	-
Cl.7.6 Table-7 S.No- (iv)(Tear strength, N/mm, Min)	-	500	-
Cl.7.6 Table-7 S.No- (v)(Tensile strength)	-	250	-
Cl.7.6 Table-7 S.No- (vi)(Elongation at break percent, Min)	-	250	-
Cl.7.6 Table-7 S.No- (vii)(Compression set percent, Max)	-	1000	-
Cl.7.7 Table-8 S.No- (i)("Compression set, percent, Max a) For EVA b) For all other material")	-	1000	-
Cl.7.7 Table-8 S.No- (ii)(Split tear strength)	-	500	-
Cl.7.7 Table-8 S.No- (iii)(Heat shrinkage, percent, Ma)	-	1000	-
Cl.7.7 Table-8 S.No- (iii)(Elongation at break, percent, Min)	-	250	-
Cl.7.7 Table-8 S.No- (iv)(Elongation at break, percent, Min)	-	250	-
Cl.7.8 Table-9 S.No- (i)(First dry collapsing load, hardness, N, Min)	-	800	-
Cl.7.8 Table-9 S.No- (ii)(Resilience, percent, Min)	-	800	-
Cl.7.8 Table-9 S.No- (iii)(Moisture resistance, percent, Min)	-	800	-
Cl.7.8 Table-9 S.No- (iv)("a) Initial dry area shape retention, percent, Min b) Area shape retention after 10th collapse, dry, percent, Min ")	-	800	-
Cl.7.8 Table-9 S.No- (v)(Peel strength, N/nm, Min)	-	1080	-
Cl.7.9 Table-10 S.No- (i)("Peel strength, N/mm, Min a) Initial b) After 5 000 wear cycles")	-	1500	-
Cl.7.9 Table-10 S.No- (ii)("Shear strength, kPa, Min a) Initial b) After 5 000 wear cycles")	-	1500	-
Cl.7.10 Table-11 S.No- (i)(Limit of useful extension, percent, Min)	-	1000	-
Cl.7.10 Table-11 S.No- (ii)(Needle strength, N/mm, Min)	-	600	-
Cl.7.11 Table-12 S.No- (i)(Breaking strength of lace)	-	250	-
Cl.7.11 Table-12 S.No- (ii)(Lace tag strength)	-	250	-
Cl.7.11 Table-12 S.No- (iii)(Lace to lace abrasion)	-	800	-
Cl.7.11 Table-12 S.No- (iv)(Colour fastness to water (for lace) (Contact method))	-	500	-
Cl.7.11 Table-12 S.No- (v)(Strength of buckle/ski hook/D-ring,)	-	800	-
Cl.7.11 Table-12 S.No- (vi)("Corrosion resistance (applicable for all including decorative metal part) ")	-	900	-
Cl.7.11 Table-13 S.No- (i)(Corrosion resistance (applicable for metallic spikes))	-	900	-
Cl-7.12.1, Table no. 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	4500	-
Cl-7.12.1, Table no. 1 of IS 17011,(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	2000	-
Cl-7.12.1, Table no. 1 of IS 17011,(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	2000	-
Cl-7.12.1, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	1350	-
Cl-7.12.1, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	3700	-
Cl-7.12.1, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	2500	-
Cl-7.12.1, Table no. 1 of IS 17011,(vii)(Formaldehyde)	-	2500	-
Cl-7.12.1, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	3600	-
Cl-7.12.1, Table no. 1 of IS 17011,(ix)(PCP-TeCP-TriCP polychlorophenols)	-	3000	-
Cl-7.12.1, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	3600	-
Cl-7.12.1, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	2500	-
Cl-7.12.1, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	3700	-
Cl-7.12.1, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	1350	-
Cl-7.12.1, Table no. 1 of IS 17011,(x)(pH)	-	300	-
Cl-7.12.1, Table no. 1 of IS 17011,(xi)(Phthalates (each individual phthalate))	-	3600	-
C-7.12.1, Table no. 1 of IS 17011,(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	1500	-
Cl-7.12.2(PVC is present in sports shoe)	-	500	-
Cl- 8.1(Marking)	-	150	-

19 Jul, 2027

-
-

IS 17043 : Part 2 (2024)

Shoes: Shoes for General Purpose

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Shape and Design)	-	100	-
Cl-5.3(Material)	-	100	-
Cl-5.4, Table-1 (i)(Bond strength, N/mm, Min Upper to outsole, N/mm, Min)	-	1080	-
Cl-5.4, Table-1 (ii)(Inter layer bond strength,= N/mm, Min Midsole to outsole, N/mm, Min)	-	1080	-
Cl-5.4, Table-1 (iii)(Whole shoe flexing, flexes)	-	1080	-
Cl-5.4, Table-1 (iv)(Water proofness on complete shoe)	-	1500	-
Cl-5.4, Table-1 (v)(Slip resistance, Cof(1), Min dry and wet* (quarry tile))	-	2500	-
Cl-5.4, Table-1 (vi)(Attachment strength of strap and buckle/D-ring N)	-	800	-
Cl-5.4, Table-1 (vii)(Attachment strength of strap and velcro , N, Min)	-	1000	-
Cl-5.4, Table-1 (viii)(Strength of eyelet attachment, N, Min)	-	100	-
Cl-5.4, Table-1 (ix)(Heel pull off strength, N, Min)	-	1200	-
Cl-5.4, Table-1 (x)(Top piece attachment strength, N, Min)	-	800	-
Cl-5.4, Table-1 (xi)(Seam strength, N/mm, Min)	-	900	-
Cl-5.4, Table-1 (xii)(Whole shoe topline strength, N, Min)	-	800	-
Cl-5.4, Table-1 (xiii)(Abrasion resistance (volume loss), mm3)	-	1080	-
Cl-5.4, Table-1 (xiv)(Chemical requirements(3))	-	30000	-
Cl-5.4, Table-1 (xv)(Lead content (as Pb) ppm, Max)	-	630	-
Cl-5.4, Table-1 (xvi)(Hydrolysis resistance,(4) cut growth at 150 000 flexes, mm, Max)	-	2700	-
Cl-6.1.1, Table-2 (i)(Tear trength, N)	-	500	-
Cl-6.1.1, Table-2 (ii)(Flexing resistance, flexes)	-	1080	-
Cl-6.1.1, Table-2 (iii)(Colour fastness to rubbing (marring/staining))	-	1000	-
Cl-6.1.1, Table-2 (iv)(Colour fastness to water (contact method- multi fabrics))	-	1000	-
Cl-6.1.1, Table-2 (v)(Water vapour permeability,mg/cm2 /h, Min Water vapour coefficient,mg/cm2 , Min)	-	700	-
Cl-6.1.1, Table-2 (vi)(Stitch tear strength, N/mm, Min)	-	500	-
Cl-6.1.3, Table- 4 (vii)(Abrasion resistance)	-	1080	-
Cl-6.1.2, Table-3 (i)(Colour fastness to light, Marring, Min)	-	1000	-
Cl-6.1.2, Table-3 (ii)(Water resistance)	-	1000	-
Cl-6.1.2, Table-3 (iii)(Flexing resistance, flexes at (-) 5 °C 25 000 flexes)	-	1080	-
Cl-6.1.3, Table- 4 (i)(Breaking strength, N/mm, Min Elongation at break, percent, Min)	-	250	-
Cl-6.1.3, Table- 4 (ii)(Tear Strength, N, Min)	-	500	-
Cl-6.1.3, Table- 4 (iii)(Strength at needle perforation, N/mm, Min)	-	600	-
Cl-6.1.3, Table- 4 (iv)(Flexing resistance, Flexes)	-	1500	-
Cl-6.1.3, Table- 4 (v)(Water vapour permeability (WVP), mg/cm2 /h, Min)	-	700	-
Cl-6.1.3, Table- 4 (vi)(Hydrolysis resistance)	-	2700	-
Cl-6.1.4, Table-5 (i)(Colour fastness to light, Marring, Min)	-	1000	-
Cl-6.1.4, Table- 5 (ii)(Flexing resistance, flexes at (-) 5 ºC, s 25 000 flexes)	-	1500	-
Cl-6.2, Table-6 (i)(Tear strength, N, Min)	-	500	-
Cl-6.2, Table-6 (ii)(Abrasion resistance)	-	1080	-
Cl-6.2, Table-6 (iii)(Colour fastness rubbing (crocking))	-	1000	-
Cl-6.2, Table-6 (iv)(Colour fastness to perspiration)	-	1000	-
Cl-6.2, Table-6 (v)(Water vapour permeability, mg/cm2 /h, Min Water vapour coefficient, mg/cm2, Min)	-	700	-
Cl-6.3, Table-7 (i)(Flexing index, Min)	-	800	-
Cl-6.3, Table-7 (ii)(Abrasion resistance at 400 cycles)	-	1080	-
Cl-6.3, Table-7 (iii)(Water absorption, mg/cm2 , Min Water desorption, percent, Min)	-	700	-
Cl-6.4, Table-8 (i)(Thickness, mm, Min)	-	180	-
Cl-6.4, Table-8 (ii)(Abrasion resistance)	-	1080	-
Cl-6.4, Table-8 (iii)(Water absorption, mg/cm2 , Min Water desorption, percent, Min)	-	700	-
Cl-6.5.1, , Table-9 (i)(Flexing resistance)	-	1080	-
Cl-6.5.1, , Table-9 (ii)(Hydrolysis resistance, cut growth at 150 000 flexes, mm, Max)	-	2700	-
Cl-6.5.1, , Table-9 (iii)(Compression set, percent, Max)	-	1000	-
Cl-6.5.2.1, Table-10 (i)(Grain crack index, Min)	-	900	-
Cl-6.5.2.1, Table-10 (ii)(Density, g/cm3 , Min)	-	300	-
Cl-6.5.2.1, Table-10 (iii)(Abrasion resistance, mm/kcs, Max)	-	1080	-
Cl-6.5.2.2, Table-11 (i)(Water resistance, (dynamic method))	-	1000	-
Cl-6.5.2.3, Table-12 (i)(Hardness, Min)	-	600	-
Cl-6.5.2.3, Table-12 (ii)(Density, g/cm3 , Max)	-	300	-
Cl-6.5.2.3, Table-12 (iii)(Abrasion resistance (volume loss), mm3 , Max)	-	1080	-
Cl-6.5.2.3, Table-12 (iv)(Bond Strength between Rubber top-lift and adjacent material, N/mm, Min)	-	1080	-
Cl-6.6, Table-13 (i)(Heat shrinkage, percent, Max)	-	1000	-
Cl-6.6, Table-13 (ii)(Split tear strength, kg/25 mm, Min)	-	500	-
Cl-6.6, Table-13 (iii)(Compression set, percent, Max)	-	1000	-
Cl-6.7, Table-14 (i)(Hardness, N)	-	600	-
Cl-6.7, Table-14 (ii)(Resilience, percent)	-	800	-
Cl-6.7, Table-14 (iii)(Moisture resistance, percent)	-	800	-
Cl-6.10, Table-17 (i)(Lace breaking strength, N, Min)	-	250	-
Cl-6.10, Table-17 (ii)(Lace tag strength, N, Min)	-	250	-
Cl-6.10, Table-17 (iii)(Lace to lace abrasion resistance, cycles)	-	800	-
Cl-6.10, Table-17 (iv)(Colour fastness to water for lace contact methodstaining Gray scale rate , Min)	-	500	-
Cl-6.10, Table-17 (v)(Corrosion resistance)	-	900	-
Cl-6.11, Table-18 (i)(Fatigue resistance, cycles, Min)	-	1500	-
Cl-6.11, Table-18 (ii)(Security of puller attachment strength, N, Min)	-	800	-
Cl-6.11, Table-18 (iii)(Lateral load, N, Min)	-	800	-
Cl-6.11, Table-18 (iv)(End attachment strength, N, Min)	-	800	-
Cl-8.1(Marking)	-	150	-
Cl-6.7, Table-14 (iv)(Area shape retention, percent (a) Initial, Min b) After 10 collapsing load, Min)	-	800	-
Cl-6.7, Table-14 (v)(Adhesion strength, N/mm)	-	1080	-
Cl-6.8, Table-15 (i)(Peel strength, N/mm a) Initial, Min b) After 5 000 wear cycles, Min)	-	1500	-
Cl- 6.8, Table-15 (ii)(a) Shear strength, kPa b) Initial, Min)	-	1500	-
Cl- 6.9, Table-16 (i)(Limit of useful extension, percent, Min)	-	1000	-
Cl- 6.9, Table-16 (ii)(Needle strength, N/mm, Min)	-	600	-
Cl-6.1.1, Table-2 (vii)(Abrasion resistance)	-	1080	-

19 Jul, 2027

-
-

IS 15844 : Part 1 (2023)

SPORTS FOOTWEAR PART -1 GENERAL PURPOSEFirst Revision

63000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl No.4.1(Sampling and Conditioning)	-	180	-
Cl No.4.2(Construction)	-	100	-
Cl No.4.3(Whole Footwear)	-	100	-
4.3.1(Insole)	-	100	-
4.3.2(Toe spring height)	-	180	-
4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	1080	-
4.3.4("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	1080	-
4.3.5(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	1080	-
4.3.6(Energy Absorption at Seat Region)	-	630	-
4.3.7(Complete Shoe Flexing)	-	1500	-
4.3.8(Washability)	-	1000	-
4.3.9(Slip Resistance)	-	2500	-
Cl No.4.4 , Table No. 2 , i) , a)(Flexing resistance, Dry condition)	-	1500	-
Cl No.4.4 , Table No. 2 , i) , b)(Flexing resistance, Wet condition)	-	1500	-
Cl No.4.4 , Table No. 2 , ii)(Tear strength (average force), Min, N)	-	500	-
Cl No.4.4 , Table No. 2 , iii) , a)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Dry: (rubbing) Rating: (Marring and staining) ")	-	500	-
Cl No.4.4 , Table No. 2 , iii) , b)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Wet: (rubbing) Rating: (Marring and staining)")	-	500	-
Cl No.4.4 , Table No. 2 , iv) , a)(Water vapour permeability, mg/cm2h, Min)	-	700	-
Cl No.4.4 , Table No. 2 , iv) , b)(Water vapour coefficient, mg/cm2 , Min)	-	700	-
Cl No.4.4 , Table No. 2 , v)(Stitch tear strength (double hole), N/mm, Min)	-	500	-
Cl No.4.4 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Min Rating: (Marring)")	-	1000	-
Cl No.4.4 , Table No. 2 , i)(Breaking strength, N/mm, Min)	-	500	-
Cl No.4.4 , Table No. 2 , ii)(Elongation at break, percent Min)	-	500	-
Cl No.4.4 , Table No. 2 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	500	-
Cl No.4.4 , Table No. 2 , iv) , a)(Flexing resistance, Dry condition)	-	1500	-
Cl No.4.4 , Table No. 2 , iv) , b)(Flexing resistance, ,Wet condition)	-	1500	-
Cl No.4.4 , Table No. 2 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	700	-
Cl No.4.4 , Table No. 2 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	700	-
Cl No.4.6 , Table No. 4 , i)(Thickness, mm, Min)	-	180	-
Cl No.4.6 , Table No. 4 , ii)(Flexing index, Min)	-	500	-
Cl No.4.6 , Table No. 4 , iii)(Abrasion resistance, at 400 cycles)	-	1350	-
Cl No.4.6 , Table No. 4 , iv) , a)(Water Absorption, mg/cm2 , Min)	-	700	-
Cl No.4.6 , Table No. 4 , iv) , b)(Water Desorption, percent, Min)	-	700	-
Cl No.4.7, Table No. 5 , i)(Thickness, mm, Min)	-	180	-
Cl No.4.7, Table No. 5 , ii)(Abrasion resistance, cycles)	-	1080	-
Cl No.4.7, Table No. 5 , iii) , a)(Water Absorption, mg/cm2 , Min)	-	700	-
Cl No.4.7, Table No. 5 , iii) , b)(Water Desorption, percent, Min)	-	700	-
Cl No.4.8 , Table No. 6 , i)(Abrasion resistance (Volume loss), mm3 , Max)	-	1080	-
Cl No.4.8 , Table No. 6 , ii)("Flexing resistance Belt Method at 90 diameter Mandrel or Bennewart method, cut growth, Max")	-	1080	-
Cl No.4.8 , Table No. 6 , iii)("Hydrolysis resistance, cut growth after 150 000 flexes, in mm, Max")	-	2700	-
Cl No.4.9 , Table No. 7 , i)(Compression set, percent, Max)	-	1000	-
Cl No.4.9 , Table No. 7 , ii)(Split tear strength, kg/25 mm, Min)	-	500	-
Cl No.4.9 , Table No. 7 , iii)(Heat shrinkage, percent, Max)	-	1000	-
Cl No.4.10 , Table No. 8 , i)(First dry collapsing load, hardness, N, Min)	-	800	-
Cl No.4.10 , Table No. 8 , ii)(Resilience, percent, Min)	-	800	-
Cl No.4.10 , Table No. 8 , iii)(Moisture resistance, percent, Min)	-	800	-
Cl No.4.10 , Table No. 8 , iv) , a)(Initial dry area shape retention, percent, Min)	-	800	-
Cl No.4.11 , Table No. 9 , i)(Peel strength, N/mm, Min)	-	1500	-
Cl No.4.11 , Table No. 9 , ii)(Shear strength, kPa , Min)	-	1500	-
Cl No.4.12 , Table No. 10 , i)(Limit of useful extension, percent, Min)	-	1000	-
Cl No.4.13 , Table No. 11 , i)(Breaking strength of lace, N, Min)	-	800	-
Cl No.4.13 , Table No. 11 , ii)(Lace tag strength, N, Min)	-	800	-
Cl No.4.13 , Table No. 11 , iii)(Lace to lace abrasion,)	-	1000	-
Cl No.4.13 , Table No. 11 , iv)("Colour fastness to water Gray Scale Rate, Min Rating")	-	500	-
Cl No.4.13 , Table No. 11 , v)(Strength of Buckle/Ski hook, N, Min)	-	800	-
Cl No.4.13 , Table No. 11 , vi)(Corrosion resistance)	-	900	-
Cl No . 4.14("Chemical Requirement on Complete Product for all Types of Sports Shoe")	-	35000	with chemical test 63000; without 28000 per sample 10% discount to BIS
Cl No . 5(MARKING AND PACKING)	-	180	-
Cl No . 4.14, Table no. 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	4500	-
Cl No . 4.14, Table no. 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3700	-
Cl No . 4.14, Table no. 1 of IS 17011(iv)(Chromium (VI))	-	2100	-
Cl No . 4.14, Table no. 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	5000	-
Cl No . 4.14, Table no. 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	2500	-
Cl No . 4.14, Table no. 1 of IS 17011(vii)(Formaldehyde)	-	2500	-
Cl No . 4.14, Table no. 1 of IS 17011(viii)(Organotin compounds)	-	7000	-
Cl No . 4.14, Table no. 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	4500	-
Cl No . 4.14, Table no. 1 of IS 17011(x)(pH)	-	500	-
Cl No . 4.14, Table no. 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	6000	-
Cl No . 4.14, Table no. 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	3500	-
Cl-5, Table -1 S. No-(i) (Amendment No-1)(Insole)	-	100	-
Cl-5, Table -1 S. No- (ii) (Amendment No-1)(Toe spring height)	-	180	-
Cl-5, Table -1 S. No- (iii) (Amendment No-1)("Bond performance (a) Upper to sole/mid sole/composite sole (b) Interlayer bond strength")	-	2160	-
Cl-5, Table -1 S. No- (iv) (Amendment No-1)(Energy absorption at seat region)	-	630	-
Cl-5, Table -1 S. No- (v) (Amendment No-1)(Complete shoe flexing)	-	1500	-
Cl-5, Table -1 S. No-(vi) (Amendment No-1)(Washability)	-	1000	-
Cl-5, Table -1 S. No- (vii) (Amendment No-1)(Slip resistance, coefficient of friction (COF),)	-	2500	-
Cl-5, Table -1 S. No- (viii) (Amendment No-1)("Abrasion resistance a-Cellular sole b-Solid sole")	-	1500	-
Cl-5, Table -1 S. No- (x) (Amendment No-1)(Chemical requirements)	-	35000	-
Cl-5, Table -1 S. No- (xi) (Amendment No-1)(Hydrolysis resistance)	-	2700	-
Cl-5, Table -1 S. No- (xii) (Amendment No-1)(Lead content)	-	650	-
Cl-6, Table -2 S. No- (i) (Amendment No-1)(Tear strength)	-	500	-
Cl-6, Table -2 S. No- (ii) (Amendment No-1)("Colour fastness rubbing a-Dry: (rubbing) b-Wet: (rubbing)")	-	500	-
Cl-6, Table -4 S. No- (iii),(Amendment No-1)(Colour fastness to rubbing , grey scale rate with 10 rubs on dry or wet, Min)	-	500	-
Cl-6, Table -2 S. No- (iii), b) (Amendment No-1)(Water vapour coefficient)	-	630	-
Cl-6, Table -2 S. No- (iv),(Amendment No-1)(Stitch tear strength)	-	500	-
Cl-6, Table -2 S. No- (v),(Amendment No-1)(Colour fastness to light grey scale rate,)	-	1000	-
Cl-6, Table -3 S. No- (i),(Amendment No-1)(Breaking strength, N/mm, Min)	-	500	-
Cl-6, Table -3 S. No- (ii),(Amendment No-1)("Elongation at break a-Tighter direction b-Stretch direction")	-	500	-
Cl-6, Table -5 S. No-(iii), (Amendment No-1)(Abrasion resistance,)	-	1350	-
Cl-6, Table -5 S. No- (iv), a (Amendment No-1)(Water absorption)	-	630	-
Cl-6, Table -6 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	100	-
Cl-6, Table -6 S. No- (ii), (Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	1080	-
Cl-6, Table -6 S. No- (iii),a (Amendment No-1)(Water absorption)	-	350	-
Cl-6, Table -6 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	350	-
Cl-6, Table -7 S. No- (i), (Amendment No-1)(Flexing resistance (Belt method or Bennewart method))	-	1080	-
Cl-6, Table -7 S. No- (ii), (Amendment No-1)(Hydrolysis resistance, cut growth after flexes)	-	2700	-
Cl-6, Table -8 S. No- (i), (Amendment No-1)("Compression set, percent, Max a) For EVA b) For all other materials")	-	1000	-
Cl-6, Table -8 S. No- (ii), (Amendment No-1)(Split tear strength)	-	500	-
Cl-6, Table -8 S. No- (iii), (Amendment No-1)(Heat shrinkage)	-	1000	-
Cl-6, Table -9 S. No- (i), (Amendment No-1)(First dry collapsing load, hardness)	-	800	-
Cl-6, Table -9 S. No- (ii), (Amendment No-1)(Resilience, percent)	-	800	-
Cl-6, Table -9 S. No- (iii), (Amendment No-1)(Moisture resistance)	-	800	-
Cl-6, Table -9 S. No- (iv), a (Amendment No-1)(Initial dry area shape retention)	-	800	-
Cl-6, Table -10 S. No- (i), (Amendment No-1)("Peel strength a) Initial b) After 5 000 wear cycles")	-	1500	-
Cl-6, Table -10 S. No- (ii), (Amendment No-1)("Shear strength a) Initial b) After 5 000 wear cycles")	-	1500	-
Cl-6, Table -11 S. No- (i), (Amendment No-1)(Limit of useful extension)	-	1000	-
Cl-6, Table -12 S. No- (i), (Amendment No-1)(Breaking strength of lace)	-	500	-
Cl-6, Table -12 S. No- (ii), (Amendment No-1)(Lace tag strength)	-	500	-
Cl-6, Table -12 S. No- (iii), (Amendment No-1)(Lace to lace abrasion)	-	800	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	500	-
Cl-6, Table -12 S. No (v), (Amendment No-1)(Strength of buckle/ski hook)	-	800	-
Cl-6, Table -12 S. No- (vi), (Amendment No-1)(Corrosion resistance)	-	900	-

19 Jul, 2027

-
-

IS 302 : Part 2 : Sec 12 (1993)

Safety of household and similar electrical appliances - Specification: Part 2 particular requirements: Sec 12 warming plates and similar appliances

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Rating)	-	500	-
6(Classification)	-	500	-
7(Marking)	-	1000	-
8(Protection against Access to Live Parts)	-	2000	-
9(Starting Of Motor Operated Appliances)	-	0	-
10("Power Input & Current")	-	2000	-
11(Temperature Rise/ Heating)	-	5000	-
12(Operation Under Overload Conditions of Appliances with heating Element)	-	0	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	5000	-
14("Radio and Television Interference Suppression / Transient Over Voltage ")	-	10000	-
15(Moisture Resistance)	-	5000	-
16(Insulation Resistance and Electric Strength/ Leakage Current and Electric Strength)	-	5000	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	5000	-
18(Endurance)	-	1000	-
19(Abnormal Operation)	-	5000	-
20(Stability & Mechanical Hazards)	-	2000	-
21(Mechanical strength)	-	2000	-
22(Construction)	-	2000	-
23(Internal Wiring)	-	2000	-
24(Components)	-	2000	-
25(Supply Connection & External Flexible Cords)	-	2000	-
26(Terminals For External Conductors)	-	2000	-
27(Provision For Earthing)	-	2000	-
28(Screws & Connections)	-	2000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	2000	-
30(Resistance to Heat & Fire)	-	5000	-
31(Resistance to Rusting)	-	2000	-
32(Radiation hazards)	-	2000	-

19 Jul, 2027

-
Included w.e.f 26.06.2025 Exclusion: Cl 19.11.4.1-19.11.4.7(EMI/EMC)

IS 302 : Part 2 : Sec 26 (2014)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 26 clocks (First Revision)

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	1000	-
7(Marking and instructions)	-	1000	-
8(Protection against live parts)	-	2000	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	0	-
10(POWER INPUT AND CURRENT)	-	2000	-
11(HEATING)	-	5000	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	5000	-
14(TRANSIENT OVERVOLTAGES)	-	10000	-
15(MOISTURE RESISTANCE)	-	5000	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	5000	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	5000	-
18(ENDURANCE)	-	0	-
19(ABNORMAL OPERATION)	-	5000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	2000	-
21(MECHANICAL STRENGTH)	-	2000	-
22(CONSTRUCTION)	-	2000	-
23(INTERNAL WIRING)	-	2000	-
24(COMPONENTS)	-	2000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	2000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	2000	-
27(PROVISION FOR EARTHING)	-	2000	-
28(SCREWS AND CONNECTIONS)	-	2000	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	2000	-
30(RESISTANCE TO HEAT AND FIRE)	-	5000	-
31(RESISTANCE TO RUSTING)	-	2000	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	2000	-
22.16(Automatic cord reel)	-	1000	-
22.32(Oxygen bomb for rubber material)	-	1000	-
22.47(Water pressure inlet)	-	1000	-
22.3(Flexing test)	-	1000	-
24(Components)	-	2000	-
5(General conditions for the tests)	-	500	-
4(General Requirements)	-	500	-
22.46(Software)	-	2000	-

19 Jul, 2027

-
Included w.e.f 26.06.2025 Exclusion: Cl 19.11.4.1-19.11.4.7(EMI/EMC)

First
Prev
2
3
4
5
Next
Last

Bureau of Indian Standards

The National Standards Body of India

EMC Testing and Compliance LLP, Gurugram

115, Pace City-1, Sector 37, Gurugram, Gurugram, Haryana, 122001

8130427070 info@emclab.co.in

Scope List