BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15632 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

3241

National Institute of secondary steel technology

9135004

IS 15647 (2006)

Hot rolled steel narrow width strip for welded tubes and pipes

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(UTM)	-	1500	-
Cl 9(Press)	-	500	-
Cl 12(Length, Width & Thickness)	-	500	-

24 Oct, 2028

-
-

3242

National Institute of secondary steel technology

9135004

IS 2830 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes - Specification (Third Revision)

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Carbon %)	-	1000	-
6.1(Silicon %)	-	1000	-
6.1(Manganese %)	-	1000	-
6.1(Phosphorus %)	-	1000	-
6.1(Sulphur %)	-	1000	-
6.1( Nitrogen%)	-	2000	-
Cl 11(Length, Width & Thickness)	-	500	-
Cl 9(Workmanship)	-	500	-
Cl 10.2(Workmanship)	-	500	-

24 Oct, 2028

-
-

3243

National Institute of secondary steel technology

9135004

IS 2831 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (Ordinary Quality) - Specification (Fourth Revision)

8700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1, Table 1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	AS PER STANDARD
Cl. 6.1, Table 1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	AS PER STANDARD
Cl. 6.1, Table 1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	AS PER STANDARD
Cl. 6.1, Table 1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	AS PER STANDARD
Cl. 6.1, Table 1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	AS PER STANDARD
Cl. 6.1, Table 1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2000	AS PER STANDARD
Cl. 6.1, Table 1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	AS PER STANDARD
Cl. 6.1, Table 1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	AS PER STANDARD
Cl. 6.1, Table 1(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	AS PER STANDARD
Cl. 6.1, Table 1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	AS PER STANDARD
Cl. 6.1, Table 1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	AS PER STANDARD
9( FREEDOM FROM DEFECTS)	-	500	AS PER STANDARD
11 & 12(DIMENSIONS and Tolerances)	-	500	AS PER STANDARD
10.1.a)( Macro examination IS 11371)	-	1500	AS PER STANDARD
10.1.b)( Sulphur print tests IS 12037)	-	2000	AS PER STANDARD

24 Oct, 2028

-
-

3244

National Institute of secondary steel technology

9135004

IS 1079 (2017)

Hot rolled carbon steel sheet, plate and strip - Specification (Seventh Revision)

8185 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Carbon %)	-	500	AS PER STANDARD
6.1(Manganese %)	-	500	AS PER STANDARD
6.1(Silicon %)	-	500	AS PER STANDARD
6.1(Sulphur %)	-	500	AS PER STANDARD
6.1(Phosphorus %)	-	500	AS PER STANDARD
6.1( Nitrogen%)	-	2000	AS PER STANDARD
6.1( Aluminium %)	-	1500	AS PER STANDARD
6.1( Copper %)	-	1500	AS PER STANDARD
6.1( Nb)	-	1500	AS PER STANDARD
6.1(V)	-	1500	AS PER STANDARD
6.1( Ti)	-	1500	AS PER STANDARD
Cl 8(UTM)	-	500	AS PER STANDARD
Cl 13(Length, Width & Thickness)	-	500	AS PER STANDARD
Cl 9(Press)	-	500	AS PER STANDARD

24 Oct, 2028

-
-

3245

National Institute of secondary steel technology

9135004

IS 1341 (2018)

Steel Butt Hinges - Specification (Sixth Revision)

1500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
TABLE-1 (Clause-4)( CARBON)	-	500	-
TABLE-1 (Clause-4)(MANGANESE)	-	500	-
TABLE-1 (Clause-4)(SILICON)	-	500	-
TABLE-1 (Clause-4)(SULPHUR)	-	500	-
TABLE-1 (Clause-4)(PHOSPHURS)	-	500	-
TABLE-1 (Clause-4)( ALUMINIUM)	-	1500	-
TABLE-1 (Clause-4)(Nickel)	-	1500	-
TABLE-1 (Clause-4)(Chromium)	-	1500	-
TABLE-1 (Clause-4)(Molybdenum)	-	1500	-
TABLE-1 (Clause-4)(NIOBIUM)	-	1500	-
TABLE-1 (Clause-4)(VANADIUM)	-	1500	-
TABLE-1 (Clause-4)(TITANIUM)	-	1500	-
3 Tables 2 to 9(Types)	-	1000	-

24 Oct, 2028

-
-

3246

National Institute of secondary steel technology

9135004

IS 432 : Part 1 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild Steel and Medium Tensile Steel Bars

2500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause -4, 4.1( CARBON)	-	500	-
Clause -4, 4.1(MANGANESE)	-	500	-
Clause -4, 4.1(SILICON)	-	500	-
Clause -4, 4.1(SULPHUR)	-	500	-
Clause -4, 4.1(PHOSPHURS)	-	500	-
Clause -4, 4.1(NITROGEN)	-	2000	-
Clause -4, 4.1( ALUMINIUM)	-	1500	-
Clause -4, 4.1(Nickel)	-	1500	-
Clause -4, 4.1(Chromium)	-	1500	-
Clause -4, 4.1(Molybdenum)	-	1500	-
Clause -4, 4.1(NIOBIUM)	-	1500	-
Clause -4, 4.2(VANADIUM)	-	1500	-
Clause -4, 4.3(TITANIUM)	-	1500	-
Cl 8(Physical Requirements)	-	1500	-
Cl 6.1(Diameter)	-	500	-
Cl 6.2(Weight)	-	500	-

24 Oct, 2028

-
-

3247

National Institute of secondary steel technology

9135004

IS 432 : Part 2 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 2 Hard-Drawn Steel Wire

2500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 3.1.1(Sulphur)	-	500	-
Clause 3.1.1(Phosphorus)	-	500	-
Cl 7(UTM)	-	1500	-
Cl 5 & 6(Diameter)	-	500	-
Cl 8.3(Bending To Both Side At 90°, Then Straight)	-	500	-

24 Oct, 2028

-
-

3248

National Institute of secondary steel technology

9135004

IS 1038 (1983)

Specification For Steel Doors, Windows And Ventilators

5500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.(Size-Height)	-	500	-
6.1.1.2(Macro Examination)	-	1500	-
6.1.1.3(Micro Examination)	-	1500	-
4.1(Size-Width)	-	500	-
6.2(Side Hung Shutter- Thickness of hinge)	-	500	-
6.2(Side Hung Shutter- Pin diameter)	-	500	-
6.2(Side Hung Shutter-Width of hinge)	-	500	-

24 Oct, 2028

-
-

3249

National Institute of secondary steel technology

9135004

IS 7887 (1992)

Mild steel wire rod for general engineering purposes - Specification (First Revision)

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Carbon %)	-	600	-
6.1(Manganese %)	-	600	-
6.1(Silicon %)	-	600	-
6.1(Sulphur %)	-	600	-
6.1(Phosphorus %)	-	600	-
6.1( Aluminium %)	-	1500	-
Cl 9(Nominal Diameter & Out Of Shape)	-	500	-
6.1(Silicon %)	-	1000	-

24 Oct, 2028

-
-

3250

National Institute of secondary steel technology

9135004

IS 277 (2018)

Galvanized steel strips and sheets (Plain And Corrugated) - Specification (Seventh Revision)

All grades and sizes testing available

3000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.4(Mass of Coating: Single Spot Test)	-	2500	-
Cl 10(Galvanising Test)	-	2500	-
Cl 8.1(UTM)	-	500	-
Cl 14(Length, Width & Thickness)	-	500	-
Cl 13(Weight)	-	500	-
Cl 8.2(Press)	-	500	-
Cl. 14 & Cl. 15(Pitch of corrugation (average of 4))	-	500	-
Cl. 14 & Cl. 15(Depth of corrugation (average of 4))	-	500	-
Cl. 14 & Cl. 15 (Cl. 14 & Cl 15 (Number of Corrugation))	-	500	-
Cl. 14 & Cl. 15 (Cl. 14 & Cl 15 (Difference between Diagonal))	-	500	-
Cl. 14 & Cl. 15 (Cl. 14 & Cl. 15 (Thickness))	-	500	-
Cl. 8.1 (Cl. 8.1 (Tensile Strength))	-	500	-
Cl. 8.1 (Cl. 8.1 (Yield Stress))	-	500	-
Cl. 8.1 (Cl. 8.1 (Percentage Elongation ))	-	500	-

24 Oct, 2028

-
-

3251

National Institute of secondary steel technology

9135004

IS 210 (2009)

Grey iron castings - Specification (First Revision)

All Grades and size

4050 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-	1000	AS PER REQUIREMENT
15, Table 3(TENSIL.E TEST- IS 1608 Part1 )	-	1500	Dumble Sample Preparation Rs.500/-
16, Table 3(Hardness Test)	-	500	AS PER STANDARD
13(SIZE OF TEST BARS-Diameter)	-	250	AS PER STANDARD
13(SIZE OF TEST BARS-Length)	-	250	AS PER STANDARD
17,Annex B(TRANSVERSE TEST)	-	500	AS PER STANDARD
10.1(FREEDOM FROM DEFECTS)	-	500	AS PER STANDARD

24 Oct, 2028

-
-

3252

Ghaziabad Testing Laboratories Pvt Ltd, Ghaziabad

8125006

IS 398 : Part 6 (2021)

Aluminium Conductors For Overhead Transmission Purposes Part 6: High conductivity aluminium alloy stranded conductors

148000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
16.2(Visual Examination)	-	1000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	4000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	4000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	4000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	4000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
16.4, Table 2(Measurement of Diameter of Individual Aluminium Alloy Wires)	-	4000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
16.5, Table 2(Breaking Load Test - before stranding)	-	1000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
16.5, Table 2(Breaking Load Test - after stranding)	-	2000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
16.6, Table 1(Elongation Test - before stranding)	-	2000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
16.6, Table 1(Elongation Test - after stranding)	-	5000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
16.7, Table 2(Resistivity Test)	-	13000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
16.8(Wrapping Test)	-	5000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
11(Stranding)	-	3000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
8(Freedom from defects)	-	1000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
16.9, Table 3(Ultimate Tensile Strength on Stranded Conductor)	-	25000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
16.10, Table 3(d.c. Resistance Test on Stranded Conductor)	-	12000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
16.11(Stress-strain Test)	-	40000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
Cl-5(MATERIAL COMPOSITION)	-	5600	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
Cl-7, Table-1(Diameter of Wire (mm))	-	3000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
Cl-7, Table-1(Minimum Tensile Strength of Wire)	-	5000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
Cl-7, Table-1(Minimum Elongation on 250 mm (percent))	-	5000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
Cl-8(Freedom from Defects)	-	1000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
Cl-9.1.1(Wires-Nominal Sizes)	-	2500	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
Cl-9.2.1(Stranded Conductors- Size)	-	3000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
Cl-10(Joints in Wires)	-	5000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-

30 Sep, 2027

-
Included w.e.f 18.11.2025

3253

CIPET, Chennai

6104634

IS 15328 (2003)

Unplasticized Non-Pressure Polyvinyl Chloride ( PVC -U ) Pipes for use in Underground Drainage and Sewerage Systems -

upto 315mm

27162.5 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1,6.1.1 IS 12235 (Part 1) Table 1(Dimension of Pipes: Mean outside Diameter, dem)	-	375	25% Discount on Test charges for BIS. GST not included
6.1,6.1.1 IS 12235 (Part 1) Table 1(Outside Diameter at any point, de)	-	0	-
6.1.2 IS 4985 Table 2(Wall Thickness, e )	-	0	-
6.1.3 (Length of Pipe)	-	375	25% Discount on Test charges for BIS. GST not included
6.1.4, Table 3(Dimensions of integral sockets and spigot ends :- a) Elastomeric Sealing Ringsockets and spigot ends i)Meean inside dia. Of socket, dsm)	-	375	25% Discount on Test charges for BIS. GST not included
6.1.4, Table 3(ii) Min. depth of engagement, A. )	-	0	-
6.1.4 Table 3(iii) Depth of sealing Zone C )	-	0	-
6.1.4, Table 3(v) Chamfer length, H : Approx.)	-	0	-
6.1.4.1 (wall thickness of sockets e2 min=0.9e )	-	0	-
6.1.4.1 (e3min=0.75e)	-	0	-
6.1.4, Table 4(b) Solvent Cement Joint sockets and spigot ends i) Mean inside dia. Of socket, dsm)	-	0	-
6.1.4, Table 4(ii) Length of Solvent Cement socket, l2 )	-	0	-
6.1.4, Table 4(iii) Length of spigot, l1, 100 mm Min.)	-	0	-
6.1.4, Table 4(iv) Chamfer length, H, 7 mm Approx.)	-	0	-
7(Physical characteristics )	-	375	25% Discount on Test charges for BIS. GST not included
7.1(Appearance:- )	-	0	-
7.1(Appearance:- )	-	0	-
7.2(Colour )	-	375	25% Discount on Test charges for BIS. GST not included
7.3 IS 1223S ( Part 2)(Vicat Softening Temperature When determined according to IS 1223S ( Part 2), shall not be lessthan 79°C.)	-	825	25% Discount on Test charges for BIS. GST not included
7.4 IS 1223S ( Part 5)(Longitudinal Reversion: When tested according to the methodprescribed in IS 1223S ( Part 5), shall not exceed ± 5 percent. The pipe shall not exhibit any blisters, bubbles or crackson completion of the test.)	-	1025	25% Discount on Test charges for BIS. GST not included
8(MECHANICAL CHARACTERISTICS)	-	0	-
8.1 Annex B(Resistance to External Blows at 0ºC: When tested according to the method prescribed in Annex B, the pipes hall have a true impact rate of not more than I0 percent.)	-	1325	25% Discount on Test charges for BIS. GST not included
8.2 Annex C Table 5(Ring Stiffness: When tested according to the method described in Annex C,the ring stiffness of the pipe shall be as stated in Table 5)	-	1325	25% Discount on Test charges for BIS. GST not included
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(Resistance to internal Hydrostatic Pressure(Type Test) a) Acceptance Test:(1h at 27 0 C) )	-	638.50	25% Discount on Test charges for BIS. GST not included
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(b) Type Test:(1000h at 60 0 C) )	-	8250	25% Discount on Test charges for BIS. GST not included
9 9.1, IS 5382(JOINTS:- a) Elastomeric Sealing Rings)	-	375	25% Discount on Test charges for BIS. GST not included
9.2 IS 14182(b) Solvent cement)	-	8262.50	25% Discount on Test charges for BIS. GST not included
10(Performance requirements)	-	0	-
10.1.1 Annex D(Internal hydrostatic pressure test for elastomeric sealing ring joints)	-	637.50	25% Discount on Test charges for BIS. GST not included
10.1.2 Annex E(Internal negative hydrostatic pressure test (internal vacuum) for elastomeric sealing ring joints)	-	750	25% Discount on Test charges for BIS. GST not included
10.2.1(Internal hydrostatic pressure test for solvent cemented Joints)	-	637.50	25% Discount on Test charges for BIS. GST not included
10.2.2(Internal negative hydrostatic pressure test (internal vacuum)for solvent cemented joints)	-	750	25% Discount on Test charges for BIS. GST not included
'7.5 (amdt.7)(Effect on Water (Type test))	-	2250	25% Discount on Test charges for BIS. GST not included
5.3(Qualitative)	-	0	-
12(Marking)	-	0	-
6.1.4, Table 3(iv) Length of spigot, l1)	-	0	-

31 Mar, 2027

-
Included w.e.f. 04.11.2025 Exclusion: 5,5.2 (Composition of the material The material shall contain a minimum of 0.3 percent of rutile grade titanium dioxide.)

3254

Samridhi Test House Pvt. Ltd.

8184706

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	300	-
8.1.1(Protection against live parts in all positions)	-	1000	-
8.1.2(Protection against live parts in openings)	-	1000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	1000	-
8.1.4(Protection against live parts against protective impedance)	-	1000	-
9(Starting of motor operation test requirements and tests)	-	1000	-
10.1(Power input)	-	1000	-
10.2(Current input)	-	1000	-
11.1(General)	-	300	-
11.2(General)	-	1000	-
11.3(Heating)	-	300	-
13.1(General)	-	300	-
13.2(Leakage current at operating temperature)	-	1500	-
13.3(Electric Strength at operating temperature)	-	1500	-
14(Transient Over Voltages)	-	1500	-
15.0(General)	-	300	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	2500	-
15.2(Spillage Test)	-	1000	-
15.3(Humidity Test)	-	1500	-
16.0(General)	-	500	-
16.1(General)	-	500	-
16.2(Leakage Current (after Clause 15))	-	1000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	1500	-
17(Over Load Protection of Transformers and associated circuits)	-	2000	-
18(Endurance Test requirements and tests)	-	1500	-
19(Abnormal Operation)	-	1500	-
20(Stability test)	-	1500	-
21(Mechanical Strength Test)	-	1500	-
22(Construction verification related test)	-	1500	-
23(General)	-	300	-
24(Components)	-	2000	-
25(Supply connection and external flexible cords)	-	2000	-
26(Terminals for external conductors)	-	2000	-
27(Provision for earthing)	-	2500	-
28(Screw test and connections)	-	2500	-
29(clearance, creepage distances and solid insulation)	-	1000	-
30.1(Ball pressure test)	-	1000	-
30.2(Glow Wire Test)	-	1000	-
30.2(Needle Flame Test)	-	1500	-
31(Resistance to Rusting)	-	1000	-
32(Radiation Toxicity and Similar Hazards)	-	1000	-
4(General requirement)	-	300	-
16(Leakage current and electric strength)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	2000	-
18(Endurance)	-	0	-
8.1.5(Live parts of built-in appliances)	-	1000	-
11.4(Heating appliances)	-	300	-
11.5(Motor-operated appliances)	-	300	-
11.6(Combined appliances)	-	300	-
11.7(Duration corresponding)	-	300	-
11.8(Temperature rise)	-	300	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
4(General Requirement)	-	300	-
5(General conditions for tests)	-	300	-
6(Classification- IS 302-1)	-	300	-

-
Included w.e.f. 30.10.2025 Exclusion: 19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.4 (Surge immunity test) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Harmonics) "(1)Cooking ranges, hobs, ovens and similar appliances, (2)Commercial Dispensing Appliances and Vending Machines, (3) spin extractors (For testing charges please refer relevant part 2 standard in LIMS)"

3255

DELHI TEST HOUSE, Azadhpur

8131406

IS 12406 (2025)

Medium Density Fibre Boards of Wood and Other Lignocellulosic Materials for General Purpose - Specification ( Third Revision )

ALL

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 7(Finish --IS 2380 (Part 2), IS 2380 (Part 3) & Visual)	-	500	Rs.- 16000/-
As per Clause 8, Table 2(Length -IS 2380 (Part 2))	-	500	Rs.- 16000/-
As per Clause 8, Table 2(Width - IS 2380 (Part 2))	-	500	Rs.- 16000/-
As per Clause 8, Table 2(Thickness - IS 2380 (Part 2))	-	500	Rs.- 16000/-
As per Clause 8, Table 2(Squareness, Max. - IS 2380 (Part 2))	-	500	Rs.- 16000/-
As per Clause 8, Table 2(Edge straightness, Max.)	-	500	Rs.- 16000/-
As per Clause 9.1 Table 3(Density -IS 2380 (Part 3))	-	500	Rs.- 16000/-
As per Clause 9.1 Table 3(Variation from mean density, --IS 2380 (Part 3))	-	500	Rs.- 16000/-
As per Clause 9.1 Table 3(Moisture Content -IS 2380 (Part 3))	-	1000	Rs.- 16000/-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of rupture (MoR), Min.-IS 2380 (Part 4))	-	1000	Rs.- 16000/-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of elasticity (MoE), Min. -(IS 2380 (Part 4))	-	1000	Rs.- 16000/-
As per Clause 9.1 Table 4, Table 5, Table 6, Table7(Internal bond strength, Min. - IS 2380 (Part 5))	-	1000	Rs.- 16000/-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(24 h thickness swelling (due to general absorption) Max. - IS 2380 (Part 17))	-	1000	Rs.- 16000/-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Screw withdrawal strength (face) , Min. -IS 2380 (Part 4))	-	1000	Rs.- 16000/-
As per Clause 9.1 Table 4, Table 5, table 6, Table 7(Screw withdrawal strength (edge) , Min. -IS 2380 (Part 4))	-	1000	Rs.- 16000/-
As per Clause 9.1 , Table 5, Table 6, Table 7(Moisture Resistance : Option 1 : Cyclic test (1. )Internal bond strength Min. -IS 2380 (Part 5) see note 1)	-	1000	Rs.- 16000/-
As per Clause 9.1 , Table 5, Table 6, Table 7(Moisture Resistance : Option 2 : Boil test (1.) Internal bond strength , Min.- IS 2380 (Part 5) see note 2)	-	1000	Rs.- 16000/-
As per Clause 9.1 , Table 9(Formaldehyde content Fc, mg/100 g for oven dry board -IS 13745)	-	3000	Rs.- 16000/-

17 Jun, 2027

-
"1 As per Clause 9.1 , Table 9 (Steady-state formaldehyde emission, Fc, mg/m3 (optional test)) STEADY-STATE FORMALDEHYDE EMISSION FACILITY IS NOT AVAILABLE 2 Cl-5.1 (Wood and Any Other Lignocellulosic Material) - IT IS FOR MANUFACTURER 3 Cl-5.2 (Adhesive) - IT IS FOR MANUFACTURER 4 Cl-5.3 (Sizing Material) - IT IS FOR MANUFACTURER 5 Cl-5.4 (Preservative Treatment) - IT IS FOR MANUFACTURER 6 Cl-6 (MANUFACTURE) - IT IS FOR MANUFACTURER"

3256

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 280 (2006)

Mild steel wire for general engineering purposes (Fourth Revision)

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	0	-
Cl 9(Tensile Test On UTM)	-	1000	-
Cl 11(Workmanship)	-	0	-
Cl 13(Workmanship)	-	0	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	0	-
Cl 9(Tensile Test On UTM)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 13(Workmanship)	-	0	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	0	-
Cl 9(Tensile Test On UTM)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 13(Workmanship)	-	0	-
6 AND AS PER IS 7887(PHOSPHORUS)	-	700	-
6 AND AS PER IS 7887(SULPHUR)	-	700	-
6 AND AS PER IS 7887(MANGANESE)	-	700	-
6 AND AS PER IS 7887(SILICON)	-	700	-
6 AND AS PER IS 7887(CARBON)	-	700	-
7 & 8(Ovality)	-	0	-
7 & 8(Diameter)	-	0	-
9.2(Wrapping Test)	-	1000	-
9.3(Bend test)	-	1000	-
10(Finish)	-	0	-
11(Coating test)	-	600	-
13(Freedom from defects)	-	200	-
Cl 13(Workmanship)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 9(Tensile Test On UTM)	-	0	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	0	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	0	-
Cl 9(Tensile Test On UTM)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 13(Workmanship)	-	0	-
14(Packing)	-	0	-
15(Marking)	-	200	-
CL 08(AVG Outer dia (08))	-	0	-
CL 08(MAX OVALITY (08))	-	0	-
Clause 6 and Note 3 of IS 7887(Any Instrumental Method/Chemical Method)	-	0	-
Clause 6 and Note 3 of IS 7887(Copper)	-	0	-
Clause 6 and Note 3 of IS 7887(Copper)	-	0	-
6 AND AS PER IS 7887(MICRO ALLOY)	-	0	-
6 AND AS PER IS 7887(ALUMINIUM)	-	0	-

-
included w.e.f 05-01-2026

3257

Umwelt Research Lab Private Limited, Pune

7175516

IS 15410 (2025)

PLASTIC BOTTLES/CONTAINERS FOR PACKAGING OF NATURAL MINERAL WATER AND PACKAGED DRINKING WATER - SPECIFICATION (first revision)

All

18425 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.1.1(Materials for Primary Packaging (Container))	-	600	Testing Charges for Complete Testing 18425/- and 15% Discount on Full Testing for BIS Samples.
Clause 4.1.2.1(Material for Closures (a) Closure materials (Aluminium))	-	100	-
Clause 4.1.2.1(Material for Closures (b) Plastic Materials)	-	100	-
Clause 4.1.2.1(Material for Closures (c) Combination of plastics and metal)	-	100	-
Clause 4.1.2.2(Materials for Primary Packaging-Closure colourants)	-	100	-
Clause 4.1.2.3(Materials for Primary Packaging-Sleeves for the closure)	-	100	-
Clause 4.1.3(Materials for Primary Packaging-Wad)	-	500	-
Clause 4.2(Design, Shape and Dimensions)	-	150	-
Clause 4.3("Manufacture, Workmanship, Finish and Appearance")	-	150	-
Clause 4.4(Capacity (Nominal))	-	300	-
Clause 4.4(Capacity (Brimfull))	-	300	-
Clause 4.5(Wall Thickness Top)	-	150	-
Clause 4.5(Wall Thickness Middle)	-	150	-
Clause 4.5(Wall Thickness Bottom)	-	150	-
Clause 4.6.1.1(Colour-Transparency)	-	300	-
Clause 4.6.1.2(Colour-Tint)	-	300	-
Clause 4.6.2(Leakage Test (Closure Leakage) cls. 6.1 of IS 2798)	-	300	-
Clause 4.6.2(Leakage Test (Vibration Leakage) cls. 6.2 of IS 2798)	-	300	-
Clause 4.6.3.1(Drop Impact test)	-	350	-
Clause 4.6.3.2(Stack Load test)	-	350	-
Clause 4.6.4.1(Overall Migration Container)	-	500	-
Clause 4.6.4.1(Overall Migration Closure)	-	500	-
Clause 4.6.4.2(Specific Migration Container Barium)	-	875	-
Clause 4.6.4.2(Specific Migration Container Cobalt)	-	875	-
Clause 4.6.4.2(Specific Migration Container Copper)	-	875	-
Clause 4.6.4.2(Specific Migration Container Iron)	-	875	-
Clause 4.6.4.2(Specific Migration Container Lithium)	-	875	-
Clause 4.6.4.2(Specific Migration Container Manganese)	-	875	-
Clause 4.6.4.2(Specific Migration Container Zinc)	-	875	-
Clause 4.6.4.2(Specific Migration Container Antimony)	-	875	-
Clause 4.6.4.2(Specific Migration Container Phthalic acid, bis (2- ethylhexyl) ester (DEHP))	-	875	-
Clause 4.6.4.2(Specific Migration Closure Barium)	-	875	-
Clause 4.6.4.2(Specific Migration Closure Cobalt)	-	875	-
Clause 4.6.4.2(Specific Migration Closure Copper)	-	875	-
Clause 4.6.4.2(Specific Migration Closure Iron)	-	875	-
Clause 4.6.4.2(Specific Migration Closure Lithium)	-	875	-
Clause 4.6.4.2(Specific Migration Closure Manganese)	-	875	-
Clause 4.6.4.2(Specific Migration Closure Zinc)	-	875	-
Clause 4.6.4.2(Specific Migration Closure Antimony)	-	875	-
Clause 4.6.4.2(Specific Migration Closure Phthalic acid, bis (2- ethylhexyl) ester (DEHP))	-	875	-
Clause 4.6.4.3(Colour migration Container)	-	875	-
Clause 4.6.4.3(Colour migration Closure)	-	875	-
Clause 4.6.5(Water Potability Test (Taste))	-	1500	-
Clause 4.6.5(Water Potability Test (odour))	-	1500	-
Clause 5.1(Marking)	-	0	-

26 Dec, 2026

-
Included w.e.f 16.12.2025

3258

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 7098 : Part 1 (2025)

Crosslinked Polyethylene Insulated Thermoplastic Sheathed Cables - Specification Part 1 For Working Voltages up to and Including 1 100 Volts (Second Revision)

ALL

15900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(Conductors -Material)	-	0	-
Cl-5, Table-1 (i)(Tensile strength)	-	500	Single core (normal)-16000 Single core (FR)-31000 Single core (FRLSH)-36000 Single core (LSHF)-43000 Additional Charge 1500 for each core
Cl-5, Table-1 (ii) (a)(Elongation at break- Ageing in air oven)	-	500	-
Cl-5, Table-1 (ii) (b)(Variation in tensile strength, from that without ageing)	-	500	Single core (normal)-16000 Single core (Cat-C1)-31000 Single core (Cat-C2)-36000 Single core (Cat-C3)-43000 Additional Charge Rs.1500 for each additional core
Cl-5, Table-1 (ii) (c)(Variation in elongation at break, from that without ageing)	-	0	-
Cl-5, Table-1 (iii) (a)(Hot set- Treatment;)	-	500	-
Cl-5, Table-1 (iii) (b)(Hot set- Elongation under load)	-	0	-
Cl-5, Table-1 (iii) (c)(Hot set- Permanent elongation after cooling)	-	0	-
Cl-5, Table-1 (iv)(Shrinkage)	-	500	-
Cl-5, Table-1 (v)(Water absorption (gravimetric))	-	500	-
Cl-5, Table-1 (vi)(Volume resistivity)	-	500	-
Cl-6.1 (a)(Fillers and inner sheath- Vulcanized or unvulcanized rubber)	-	0	-
Cl-6.1 (B)(Fillers and inner sheath- Thermoplastic materials)	-	0	-
Cl-7(Armouring)	-	0	-
Cl-8(Outer Sheath)	-	0	-
Cl-10.3(Tolerance on Thickness of Insulation)	-	0	-
Cl-11(Core Identification)	-	0	-
Cl-12(Laying up of Cores)	-	0	-
Cl-13(Inner Sheath (Common Covering))	-	500	-
Cl-14.1(Armouring- Application)	-	0	-
Cl-14.1.2(armour round wires/formed wires)	-	0	-
Cl-14.2(Type of Armour)	-	0	-
Cl-14.3(Dimensions)	-	500	-
Cl-14.4(Joints)	-	0	-
Cl-14.5(Resistance)	-	500	-
Cl-15.3(Thickness of Outer Sheath)	-	500	-
Cl-16.1 (i) (a)(Test on conductor: Annealing test (for copper);)	-	500	-
Cl-16.1 (i) (b)(Test on conductor: Tensile test (for aluminium);)	-	500	-
Cl-16.1 (i) (c)(Test on conductor: Wrapping test (for aluminium);)	-	500	-
Cl-16.1 (i) (d)(Test on conductor: Resistance test)	-	500	-
Cl-14.6 (a)(Physical tests on round wires/formed wires- Tensile strength)	-	500	-
Cl-14.6 (b)(Physical tests on round wires/formed wires- Elongation at break)	-	500	-
Cl-14.6 (c)(Physical tests on round wires/formed wires- Torsion test for round wires)	-	500	-
Cl-14.6 (d)(Physical tests on round wires/formed wires- Winding test for formed wires)	-	500	-
Cl-14.6 (e)(Physical tests on round wires/formed wires- Uniformity of zinc coating)	-	500	-
Cl-14.6 (f)(Physical tests on round wires/formed wires- Mass of zinc coating)	-	500	-
Cl-14.6 (g)(Physical tests on round wires/formed wires- Resistivity.)	-	500	-
Cl-10, 13, 15(Test for thickness of insulation and sheath)	-	500	-
Cl-16.1 (v) (1)(PVC Sheath- Tensile strength and elongation at break;)	-	1000	-
Cl-16.1 (v) (2)(PVC Sheath- Ageing in air oven)	-	1000	-
Cl-16.1 (v) (3)(PVC Sheath- Loss of mass in air oven)	-	1000	-
Cl-16.1 (v) (5)(PVC Sheath- Hot deformation test)	-	1000	-
Cl-16.1 (v) (6)(PVC Sheath- Heat shock test)	-	500	-
Cl-16.1 (v) (7)(PVC Sheath- Thermal stability)	-	500	-
Cl-8.3-Table 1A(PE Sheath- Carbon black content)	-	5500	-
Cl-8.3-Table 1A(PE Sheath- Tensile strength and elongation at break before and after ageing)	-	0	As applicable
Cl-8.3-Table 1A(PE Sheath- Hot deformation)	-	0	As applicable
Cl-8.3-Table 1A(PE Sheath- Shrinkage test.)	-	0	As applicable
Cl- Table 1B(LSHF Sheath- Tensile strength and elongation at break before and after ageing)	-	0	As applicable
Cl- Table 1B(LSHF Sheath- Hot deformation)	-	0	As applicable
Cl- Table 1B(LSHF Sheath- Water absorption test)	-	0	As applicable
Cl- Table 1B(LSHF Sheath- Shrinkage test)	-	0	As applicable
Cl-17.2(High voltage test)	-	0	As applicable
Cl-17.3(Flammability test)	-	0	-
Cl-17.4(Oxygen index test (FR, FR-LSH or LSHF Sheath))	-	2500	Additional charges, if applicable
Cl-17.5(Flame retardance test on single cable)	-	2500	Additional charges, if applicable
Cl-17.6(Flame retardance test on bunched cables (FR, FR-LSH or LSHF Sheathed Cables))	-	10000	Additional charges, if applicable
Cl-17.7(Test for halogen acid evolution (FR-LSH or LSHF Outer Sheath))	-	2500	Additional charges, if applicable
Cl-17.8(Smoke density test (FR-LSH or LSHF Sheath))	-	2500	Additional charges, if applicable
Cl-17.9(Temperature index test; (FR, FR-LSH or LSHF Sheath))	-	0	Additional charges, if applicable
Cl-17.10(Test for pH and conductivity of LSHF Sheath)	-	3500	Additional charges, if applicable
Cl-17.11(Test for light transmission for LSHF Sheathed Cables)	-	3500	Additional charges, if applicable
Cl-16.4 (i)(Cold bend test for outer sheath)	-	0	As applicable
Cl-16.4 (ii)(Cold impact test for outer sheath)	-	0	As applicable
Cl-16.4 (iii)(Cold elongation test for LSHF sheath)	-	0	-

08 Feb, 2027

-
Included w.e.f 05.12.2025

3259

EKO PRO ENGINEERS PRIVATE LIMITED (32/41), GHAZIABAD

9179706

IS 5852 : Part 1 (2019)

Toe caps for protection of feet - Specification: Part 1 metallic toe caps (Fifth Revision)

ALL

3000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4/4.2/4.2.2-see Fig B-1(REQUIREMENTS- Dimensions-Width of Flange- as par Annex B.)	-	500	-
4/4.1(REQUIREMENTS- Finishing)	-	500	-
4/4.2/4.2.1-Table1(REQUIREMENTS- Dimensions-Internal Length- as par Annex A)	-	500	-
4/4.3- Table 2.(REQUIREMENTS-Impact Resistance- as par Annex C)	-	1000	-
4/4.4- Table 2.(REQUIREMENTS-Compression Resistance- as par Annex D)	-	1000	-
4/4.5(REQUIREMENTS-Corrosion Resistance- as par Annex E)	-	1200	-
4/4.2/4.2.2-see Fig B-1(REQUIREMENTS- Dimensions-Width of Flange- as par Annex B.)	-	500	-
4/4.1(REQUIREMENTS- Finishing)	-	500	-
4/4.2/4.2.1-Table1(REQUIREMENTS- Dimensions-Internal Length- as par Annex A)	-	500	-
4/4.3- Table 2.(REQUIREMENTS-Impact Resistance- as par Annex C)	-	1000	-
4/4.4- Table 2.(REQUIREMENTS-Compression Resistance- as par Annex D)	-	1200	-
4/4.2/4.2.2-see Fig B-1(REQUIREMENTS- Dimensions-Width of Flange- as par Annex B.)	-	500	-
4/4.1(REQUIREMENTS- Finishing)	-	500	-
4/4.2/4.2.1-Table1(REQUIREMENTS- Dimensions-Internal Length- as par Annex A)	-	500	-
4/4.3- Table 2.(REQUIREMENTS-Impact Resistance- as par Annex C)	-	1200	-
4/4.4- Table 2.(REQUIREMENTS-Compression Resistance- as par Annex D)	-	1200	-
4/4.5(REQUIREMENTS-Corrosion Resistance- as par Annex E)	-	1500	-
4.1(Finishing)	-	500	-
4.2.1 - 1(Minimum internal length in mm)	-	500	-
4.2.2(Width of Flange)	-	500	-
4.3(Impact Resistance)	-	1000	-
4.4(Compression Resistance)	-	1000	-
4.5(Corrosion Resistance)	-	1500	-
5(Marking)	-	500	-
6(Packing)	-	500	-
4/4.5(REQUIREMENTS-Corrosion Resistance- as par Annex E)	-	1500	-

-
Included w.e.f 08.12.2025

3260

DELHI TEST HOUSE, Azadhpur

8131406

IS 3087 (2025)

Medium Density Particle Boards of Wood and other Lignocellulosic Materials for General Purpose - Specification ( Third Revision )

ALL

19500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 7(Finish --IS 2380 (Part 2), IS 2380 (Part 3) & Visual)	-	500	RS. - 19500/-
As per Clause 8, Table 2(Length -IS 2380 (Part 2))	-	500	RS. - 19500/-
As per Clause 8, Table 2(Width - IS 2380 (Part 2))	-	500	RS. - 19500/-
As per Clause 8, Table 2(Thickness, Sanded/finished panel - IS 2380 (Part 2))	-	500	RS. - 19500/-
As per Clause 8, Table 2(Squareness, Max. - IS 2380 (Part 2))	-	500	RS. - 19500/-
As per Clause 8, Table 2(Edge straightness, Max. -IS 2380 (Part 2))	-	500	RS. - 19500/-
As per Clause 9.1 Table 3(Density -IS 2380 (Part 3))	-	1000	RS. - 19500/-
As per Clause 9.1 Table 3(Variation from mean density, --IS 2380 (Part 3))	-	1000	RS. - 19500/-
As per Clause 9.1 Table 3(Moisture Content -IS 2380 (Part 3))	-	1500	RS. - 19500/-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of rupture (MoR), Min.-IS 2380 (Part 4))	-	1500	RS. - 19500/-
As per Clause 9.1 Table 4, Table 6, Table 7(Modulus of elasticity (MoE), Min. -(IS 2380 (Part 4))	-	1500	RS. - 19500/-
As per Clause 9.1 Table 4, Table 5, Table 6, Table7(Internal bond strength, Min. - IS 2380 (Part 5))	-	1500	RS. - 19500/-
As per Clause 9.1 Table 6, Table 7(24 h thickness swelling (due to general absorption) Max. - IS 2380 (Part 17))	-	1500	RS. - 19500/-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Screw withdrawal strength (face) , Min. -IS 2380 (Part 4))	-	1500	RS. - 19500/-
As per Clause 9.1 Table 4, Table 5, table 6, Table 7(Screw withdrawal strength (edge) , Min. -IS 2380 (Part 4))	-	1000	RS. - 19500/-
As per Clause 9.1 , Table 6, Table 7(Moisture Resistance : Option 1 : Cyclic test (1. )Internal bond strength Min. -IS 2380 (Part 5) see note 1)	-	1000	RS. - 19500/-
As per Clause 9.1 , Table 6, Table 7(Moisture Resistance : Option 2 : Boil test (1.) Internal bond strength , Min.- IS 2380 (Part 5) see note 2)	-	1000	RS. - 19500/-
As per Clause 9.1 , Table 9(Formaldehyde content Fc, mg/100 g for oven dry board -IS 13745)	-	2500	RS. - 19500/-

17 Jun, 2027

-
Included w.e.f 12.11.2025 Exclusion: As per Clause 9.1 , Table 9 (Steady-state formaldehyde emission, Fc, mg/m3 (optional test))

3261

BIS, Southern Regional Laboratory (SRL)

None

IS 1239 : Part 1 (2004)

Steel Tubes, Tubulars and Other Wrought Steel Fittings : Part 1 Steel Tubes (BI-LINGUAL)

9200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
12 AND AS PER IS 4736 (UNIFORMITY OF ZINC COATING)	-
12 AND AS PER IS 4736 (MASS OF ZINC COATING)	-
6.2 AND AS PER IS 513 (CARBON)	-
6.2 AND AS PER IS 513 (PHOSPHORUS)	-
6.2 AND AS PER IS 513 (SULPHUR)	-
Cl. 15 (Workmanship)	-
Cl. 8, 9 Table 3,4 & 5 (Mass of Tube)	-
Cl. 14.3 (Flattening test (Over 50 mm NB))	-
Cl. 14.2 (Bend Test (uto and including 50 mm NB))	-
Cl. 14.1.1 (Elongation)	-
Cl. 14.1 (Tensile Strength)	-
6.2 AND AS PER IS 513 (NITROGEN)	-
6.2 AND AS PER IS 513 (MICRO ALLOY)	-
6.2 AND AS PER IS 513 (ALUMINIUM)	-
6.2 AND AS PER IS 513 (SILICON)	-
6.2 AND AS PER IS 10748 (MANGANESE)	-
6.2 AND AS PER IS 10748 (COPPER)	-

-
" 3m Chemical Facility is available Quantity: 5 Pieces of 5cm X 5cm Excluding excl bend test, joint (thread checking),hydrostatic test & Leak proof test (at manufacturer’s works).

3262

Aaditech Test and Calibration Lab LLP

8179926

IS 4246 (2025)

DOMESTIC GAS STOVE AND BUILT IN HOB FOR USE WITH LPG SPECIFICATION (Sixth Revision )

All

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(General - IS 4246 : 2025)	-	500	-
4.1(General - IS 4246 : 2025)	-	500	-
4.1.1(General - IS 4246 : 2025)	-	500	-
5(Materials - Cl. 5 of IS 5116)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1(Materials - IS 5116)	-	500	-
5.1(Materials - IS 5116)	-	500	-
5.1.1(Materials - IS 5116)	-	500	-
5.1.1(Materials - IS 5116)	-	500	-
5.2(Materials - IS 5116)	-	500	-
5.2(Materials - IS 5116)	-	500	-
5.3(Materials - IS 5116)	-	500	-
5.5(Materials - IS 5116)	-	500	-
5.5(Materials - IS 5116)	-	500	-
5.5(Materials - IS 5116)	-	500	-
5.7(Materials - IS 5116)	-	500	-
6.1(Design for Maintainance)	-	500	-
6.1(Design for Maintainance)	-	500	-
6.2(Design for Maintainance)	-	500	-
6.2(Design for Maintainance)	-	500	-
6.3(Design for Maintainance)	-	500	-
6.4(Design for Maintainance)	-	500	-
6.5(Design for Maintainance)	-	500	-
6.6(Design for Maintainance)	-	500	-
7.0(Rigidity and Stability)	-	500	-
7.1(Rigidity and Stability)	-	500	-
7.2(Rigidity and Stability)	-	500	-
7.3(Rigidity and Stability)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.2(Workmanship and Finish -)	-	500	-
8.3(Workmanship and Finish -)	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
10(Injector Jets)	-	500	-
10(Injector Jets)	-	500	-
10(Injector Jets)	-	500	-
10(Injector Jets)	-	500	-
10(Injector Jets)	-	500	-
10(Injector Jets)	-	500	-
11.1(Burners- Cl. 10 of IS 5116)	-	500	-
11.1(Burners- Cl. 10 of IS 5116)	-	500	-
11.1(Burners- Cl. 10 of IS 5116)	-	500	-
11.1(Burners- Cl. 10 of IS 5116)	-	500	-
11.1(Burners- Cl. 10 of IS 5116)	-	500	-
11.2(Burners)	-	500	-
11.3(Burners)	-	500	-
11.4(Burners)	-	500	-
12.1(Burner Pan Support)	-	500	-
12.2(Burner Pan Support)	-	500	-
12.3(Burner Pan Support)	-	500	-
13.1(Gas Soundness Test - Cl. 16 of IS 5116)	-	500	-
13,2(Gas Soundness Test)	-	500	-
13.2(Gas Leak Detector)	-	500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	500	-
14.2(Gas Inlet Connection)	-	500	-
14.2(Gas Inlet Connection)	-	500	-
14.2(Gas Inlet Connection)	-	500	-
14.2(Gas Inlet Connection)	-	500	-
14.3(Gas Inlet Connection)	-	500	-
14.4(Gas Inlet Connection)	-	500	-
14.5(Gas Inlet Connection - Cl. 17.3 of IS 5116)	-	500	-
14.6(Gas Inlet Connection)	-	500	-
15.0(Strength and Rigidity)	-	1000	-
15.0(Strength and Rigidity)	-	1000	-
15.0(Strength and Rigidity)	-	1000	-
15.0(Strength and Rigidity)	-	1000	-
17.0(Gas Consumption Test)	-	1500	-
17.0(Gas Consumption Test)	-	1500	-
17.0(Gas Consumption Test)	-	1500	-
17.0(Gas Consumption Test)	-	1500	-
17.0(Gas Consumption Test)	-	1500	-
17.0(Gas Consumption Test)	-	1500	-
17.2(Gas Consumption Test - For Gas Stoves)	-	1500	-
17.2 (a)(Gas Consumption Test - For Gas Stoves)	-	1500	-
17.2 (b)(Gas Consumption Test - For Gas Stoves)	-	1500	-
17.2 (c)(Gas Consumption Test - For Gas Stoves)	-	1500	-
17.3(Gas Consumption Test - For Built in Hobs)	-	1500	-
17.3.1(Gas Consumption Test - For Built in Hobs)	-	1500	-
17.3.2(Gas Consumption Test - For Built in Hobs)	-	1500	-
18.1(Ignition and Flame Travel)	-	1000	-
18.1(Ignition and Flame Travel)	-	1000	-
18.2(Ignition and Flame Travel)	-	1000	-
18.3(Ignition and Flame Travel)	-	1000	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	1000	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	1000	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	1000	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	1000	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	1000	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	1000	-
19.1(Flame Stability)	-	1000	-
19.1.1(Flame Stability)	-	1000	-
19.2(Flame Stability)	-	1000	-
19.3(Flame Stability)	-	1000	-
20(Noise Control)	-	500	-
21(Flash Back)	-	500	-
22(Formation of Soot)	-	500	-
23(Resistance to Draught)	-	1000	-
24.1(Combustion)	-	1000	-
24.1(Combustion)	-	1000	-
24.2(Combustion)	-	1000	-
25.1(Fire Hazard and Limiting Temperatures)	-	1500	-
25.1(Fire Hazard and Limiting Temperatures)	-	1500	-
25.1(Fire Hazard and Limiting Temperatures)	-	1500	-
25.1(Fire Hazard and Limiting Temperatures)	-	1500	-
25.2(Fire Hazard and Limiting Temperatures)	-	1500	-
26.1(Thermal Efficiency- Gas Stoves)	-	2000	-
26.1(Thermal Efficiency- Gas Stoves)	-	2000	-
26.1(Thermal Efficiency- Gas Stoves)	-	2000	-
26.1(Thermal Efficiency- Gas Stoves)	-	2000	-
26.1(Thermal Efficiency- Gas Stoves)	-	2000	-
26.2(Thermal Efficiency- For Built in Hobs)	-	2000	-
26.2(Thermal Efficiency- For Built in Hobs)	-	2000	-
26.2(Thermal Efficiency- For Built in Hobs)	-	2000	-
26.2(Thermal Efficiency- For Built in Hobs)	-	2000	-
26.2(Thermal Efficiency- For Built in Hobs)	-	2000	-
4.1(General - IS 4246 : 2025)	-	500	-
4.1(General - IS 4246 : 2025)	-	500	-
4.1.1(General - IS 4246 : 2025)	-	500	-
5(Materials - Cl. 5 of IS 5116)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1(Materials - IS 5116)	-	500	-
5.1(Materials - IS 5116)	-	500	-
5.1.1(Materials - IS 5116)	-	500	-
5.1.1(Materials - IS 5116)	-	500	-
5.2(Materials - IS 5116)	-	500	-
5.2(Materials - IS 5116)	-	500	-
5.3(Materials - IS 5116)	-	500	-
5.5(Materials - IS 5116)	-	500	-
5.5(Materials - IS 5116)	-	500	-
5.5(Materials - IS 5116)	-	500	-
5.7(Materials - IS 5116)	-	500	-
6.1(Design for Maintainance)	-	500	-
6.1(Design for Maintainance)	-	500	-
6.2(Design for Maintainance)	-	500	-
6.2(Design for Maintainance)	-	500	-
6.3(Design for Maintainance)	-	500	-
6.4(Design for Maintainance)	-	500	-
6.5(Design for Maintainance)	-	500	-
6.6(Design for Maintainance)	-	500	-
7.0(Rigidity and Stability)	-	500	-
7.1(Rigidity and Stability)	-	500	-
7.2(Rigidity and Stability)	-	500	-
7.3(Rigidity and Stability)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.2(Workmanship and Finish -)	-	500	-
8.3(Workmanship and Finish -)	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
10(Injector Jets)	-	1000	-
10(Injector Jets)	-	1000	-
10(Injector Jets)	-	1000	-
10(Injector Jets)	-	1000	-
10(Injector Jets)	-	1000	-
10(Injector Jets)	-	1000	-
11.1(Burners- Cl. 10 of IS 5116)	-	1000	-
11.1(Burners- Cl. 10 of IS 5116)	-	1000	-
11.1(Burners- Cl. 10 of IS 5116)	-	1000	-
11.1(Burners- Cl. 10 of IS 5116)	-	1000	-
11.1(Burners- Cl. 10 of IS 5116)	-	1000	-
11.2(Burners)	-	1000	-
11.3(Burners)	-	1000	-
11.4(Burners)	-	1000	-
12.1(Burner Pan Support)	-	1000	-
12.2(Burner Pan Support)	-	1000	-
12.3(Burner Pan Support)	-	1000	-
13.1(Gas Soundness Test - Cl. 16 of IS 5116)	-	1000	-
13,2(Gas Soundness Test)	-	1000	-
13.2(Gas Leak Detector)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.2(Gas Inlet Connection)	-	1000	-
14.2(Gas Inlet Connection)	-	1000	-
14.2(Gas Inlet Connection)	-	1000	-
14.2(Gas Inlet Connection)	-	1000	-
14.3(Gas Inlet Connection)	-	1000	-
14.4(Gas Inlet Connection)	-	1000	-
14.5(Gas Inlet Connection - Cl. 17.3 of IS 5116)	-	1000	-
14.6(Gas Inlet Connection)	-	1000	-
15.0(Strength and Rigidity)	-	1000	-
15.0(Strength and Rigidity)	-	1000	-
15.0(Strength and Rigidity)	-	1000	-
15.0(Strength and Rigidity)	-	1000	-
17.0(Gas Consumption Test)	-	2000	-
17.0(Gas Consumption Test)	-	2000	-
17.0(Gas Consumption Test)	-	2000	-
17.0(Gas Consumption Test)	-	2000	-
17.0(Gas Consumption Test)	-	2000	-
17.0(Gas Consumption Test)	-	2000	-
17.2(Gas Consumption Test - For Gas Stoves)	-	2000	-
17.2 (a)(Gas Consumption Test - For Gas Stoves)	-	2000	-
17.2 (b)(Gas Consumption Test - For Gas Stoves)	-	2000	-
17.2 (c)(Gas Consumption Test - For Gas Stoves)	-	2000	-
17.3(Gas Consumption Test - For Built in Hobs)	-	2000	-
17.3.1(Gas Consumption Test - For Built in Hobs)	-	2000	-
17.3.2(Gas Consumption Test - For Built in Hobs)	-	2000	-
18.1(Ignition and Flame Travel)	-	1500	-
18.1(Ignition and Flame Travel)	-	1500	-
18.2(Ignition and Flame Travel)	-	1500	-
18.3(Ignition and Flame Travel)	-	1500	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	1500	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	1500	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	1500	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	1500	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	1500	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	1500	-
19.1(Flame Stability)	-	1000	-
19.1.1(Flame Stability)	-	1000	-
19.2(Flame Stability)	-	1000	-
19.3(Flame Stability)	-	1000	-
20(Noise Control)	-	1000	-
21(Flash Back)	-	1000	-
22(Formation of Soot)	-	1000	-
23(Resistance to Draught)	-	1000	-
24.1(Combustion)	-	1500	-
24.1(Combustion)	-	1500	-
24.2(Combustion)	-	1500	-
25.1(Fire Hazard and Limiting Temperatures)	-	2500	-
25.1(Fire Hazard and Limiting Temperatures)	-	2500	-
25.1(Fire Hazard and Limiting Temperatures)	-	2500	-
25.1(Fire Hazard and Limiting Temperatures)	-	2500	-
25.2(Fire Hazard and Limiting Temperatures)	-	2500	-
26.1(Thermal Efficiency- Gas Stoves)	-	3000	-
26.1(Thermal Efficiency- Gas Stoves)	-	3000	-
26.1(Thermal Efficiency- Gas Stoves)	-	300	-
26.1(Thermal Efficiency- Gas Stoves)	-	2000	-
26.1(Thermal Efficiency- Gas Stoves)	-	2000	-
26.2(Thermal Efficiency- For Built in Hobs)	-	2000	-
26.2(Thermal Efficiency- For Built in Hobs)	-	2000	-
26.2(Thermal Efficiency- For Built in Hobs)	-	2000	-
26.2(Thermal Efficiency- For Built in Hobs)	-	2000	-
26.2(Thermal Efficiency- For Built in Hobs)	-	2000	-
4.1(General - IS 4246 : 2025)	-	0	-
4.1(General - IS 4246 : 2025)	-	0	-
4.1.1(General - IS 4246 : 2025)	-	0	-
5(Materials - Cl. 5 of IS 5116)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1(Materials - IS 5116)	-	0	-
5.1(Materials - IS 5116)	-	0	-
5.1.1(Materials - IS 5116)	-	0	-
5.1.1(Materials - IS 5116)	-	0	-
5.2(Materials - IS 5116)	-	0	-
5.2(Materials - IS 5116)	-	0	-
5.3(Materials - IS 5116)	-	0	-
5.5(Materials - IS 5116)	-	0	-
5.5(Materials - IS 5116)	-	0	-
5.5(Materials - IS 5116)	-	0	-
5.7(Materials - IS 5116)	-	0	-
6.1(Design for Maintainance)	-	0	-
6.1(Design for Maintainance)	-	0	-
6.2(Design for Maintainance)	-	0	-
6.2(Design for Maintainance)	-	0	-
6.3(Design for Maintainance)	-	0	-
6.4(Design for Maintainance)	-	0	-
6.5(Design for Maintainance)	-	0	-
6.6(Design for Maintainance)	-	0	-
7.0(Rigidity and Stability)	-	0	-
7.1(Rigidity and Stability)	-	0	-
7.2(Rigidity and Stability)	-	0	-
7.3(Rigidity and Stability)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.2(Workmanship and Finish -)	-	0	-
8.3(Workmanship and Finish -)	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
10(Injector Jets)	-	0	-
10(Injector Jets)	-	0	-
10(Injector Jets)	-	0	-
10(Injector Jets)	-	0	-
10(Injector Jets)	-	0	-
10(Injector Jets)	-	0	-
11.1(Burners- Cl. 10 of IS 5116)	-	0	-
11.1(Burners- Cl. 10 of IS 5116)	-	0	-
11.1(Burners- Cl. 10 of IS 5116)	-	0	-
11.1(Burners- Cl. 10 of IS 5116)	-	0	-
11.1(Burners- Cl. 10 of IS 5116)	-	0	-
11.2(Burners)	-	0	-
11.3(Burners)	-	0	-
11.4(Burners)	-	0	-
12.1(Burner Pan Support)	-	0	-
12.2(Burner Pan Support)	-	0	-
12.3(Burner Pan Support)	-	0	-
13.1(Gas Soundness Test - Cl. 16 of IS 5116)	-	0	-
13,2(Gas Soundness Test)	-	0	-
13.2(Gas Leak Detector)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.2(Gas Inlet Connection)	-	0	-
14.2(Gas Inlet Connection)	-	0	-
14.2(Gas Inlet Connection)	-	0	-
14.2(Gas Inlet Connection)	-	0	-
14.3(Gas Inlet Connection)	-	0	-
14.4(Gas Inlet Connection)	-	0	-
14.5(Gas Inlet Connection - Cl. 17.3 of IS 5116)	-	0	-
14.6(Gas Inlet Connection)	-	0	-
15.0(Strength and Rigidity)	-	0	-
15.0(Strength and Rigidity)	-	0	-
15.0(Strength and Rigidity)	-	0	-
15.0(Strength and Rigidity)	-	0	-
17.0(Gas Consumption Test)	-	0	-
17.0(Gas Consumption Test)	-	0	-
17.0(Gas Consumption Test)	-	0	-
17.0(Gas Consumption Test)	-	0	-
17.0(Gas Consumption Test)	-	0	-
17.0(Gas Consumption Test)	-	0	-
17.2(Gas Consumption Test - For Gas Stoves)	-	0	-
17.2 (a)(Gas Consumption Test - For Gas Stoves)	-	0	-
17.2 (b)(Gas Consumption Test - For Gas Stoves)	-	0	-
17.2 (c)(Gas Consumption Test - For Gas Stoves)	-	0	-
17.3(Gas Consumption Test - For Built in Hobs)	-	0	-
17.3.1(Gas Consumption Test - For Built in Hobs)	-	0	-
17.3.2(Gas Consumption Test - For Built in Hobs)	-	0	-
18.1(Ignition and Flame Travel)	-	0	-
18.1(Ignition and Flame Travel)	-	0	-
18.2(Ignition and Flame Travel)	-	0	-
18.3(Ignition and Flame Travel)	-	0	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	0	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	0	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	0	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	0	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	0	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	0	-
19.1(Flame Stability)	-	0	-
19.1.1(Flame Stability)	-	0	-
19.2(Flame Stability)	-	0	-
19.3(Flame Stability)	-	0	-
20(Noise Control)	-	0	-
21(Flash Back)	-	0	-
22(Formation of Soot)	-	0	-
23(Resistance to Draught)	-	0	-
24.1(Combustion)	-	0	-
24.1(Combustion)	-	0	-
24.2(Combustion)	-	0	-
25.1(Fire Hazard and Limiting Temperatures)	-	0	-
25.1(Fire Hazard and Limiting Temperatures)	-	0	-
25.1(Fire Hazard and Limiting Temperatures)	-	0	-
25.1(Fire Hazard and Limiting Temperatures)	-	0	-
25.2(Fire Hazard and Limiting Temperatures)	-	0	-
26.1(Thermal Efficiency- Gas Stoves)	-	0	-
26.1(Thermal Efficiency- Gas Stoves)	-	0	-
26.1(Thermal Efficiency- Gas Stoves)	-	0	-
26.1(Thermal Efficiency- Gas Stoves)	-	0	-
26.1(Thermal Efficiency- Gas Stoves)	-	0	-
26.2(Thermal Efficiency- For Built in Hobs)	-	0	-
26.2(Thermal Efficiency- For Built in Hobs)	-	0	-
26.2(Thermal Efficiency- For Built in Hobs)	-	0	-
26.2(Thermal Efficiency- For Built in Hobs)	-	0	-
26.2(Thermal Efficiency- For Built in Hobs)	-	0	-

-
Included w.e.f 18.11.2025

3263

ADS LABTECH, GHAZIABAD

8178326

IS 12818 (2010)

Unplasticized polyvinyl chloride (Pvc - U) screen and casing pipes for bore/tubewells - Specification (Second Revision)

UNPLASTICIZEDPOLYVINYLCHLORIDE(PVC-U) SCREENANDCASINGPIPESFOR BORE/TUBEWELLS

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.6(Vicat Softening Temperature IS 12235 (Part 2).)	-	1000	.
9.5(Tensile Strength IS 12235(Part 13))	-	3000	.
9.4 and Table 14(Resistance to External Blows at 0 ?C IS 12235 (Part 9))	-	1000	.
9.3(Density IS 12235 (Part 14))	-	1000	.
9.2(Internal Diameter)	-	1000	.
9.1( Visual Appearance)	-	1000	.
9.1(Visual Appearance)	-	1000	.
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	1000	.
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	1000	.
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	1000	.
4.1.2 (Ref. Cl 11 of IS 4669)(Composition -Sulphated ash content )	-	1000	.
4.1.2 (Ref. Cl 5.1. of IS 4669)(Composition - Loss on heating )	-	1000	.
4.1.1 (Ref. 3.4.1. of IS 10151)(Composition - The monomer content (VCM content) in the resin - Annex A ofIS 10151)	-	1000	.
5(COLOUR)	-	1000	.
8.4(Sealing elements a. Elastomeric material b. Shore A hardness of sealing Elements )	-	1000	.
7.5.1 7.5.2 (Slot Dimension (Table 10) Fig 2A & 2B a. Minimum number of slot on the circumference b. Σa±5% c. Mean value of approximate free passage area (%) for width of slot (w) d. Tolerance on width of slot (w) e. Width of material between slot (b))	-	1000	.
5.0(Colour of Pipes)	-	1000	.
9.7(Effect on Water a) Lead (first extraction) b) Lead (Third extraction) c) Dialkyl Tin C4 & higher homologues measured as Tin (Third extraction) d) Cadmium (All three extracts) e) Mercury (All three extracts) f) Other Toxic Substances )	-	2500	.
4.1.2(K-Value as per IS-4669)	-	1000	.
4.1.1 (VCM Content as per IS 10151 (Annex A))	-	1000	.
7.1(Screen Pipes)	-	1000	.
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	1000	.
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	1000	.
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	1000	.
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	1000	.
8.4(Sealing rings - Hardness)	-	1000	.
8.1 to 8.3 and Table 11 &12 Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES. IS 554.)	-	1000	.
8.1 to 8.3 and Table 11 &12 Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES. IS 554.)	-	1000	.
7.5 and Table 10 Fig 2A & 2B(Approximate Free Passage Area, in Percent (Mean Value) for Width of Slot (w))	-	1000	.
7.5 and Table 10 Fig 2A & 2B(Minimum number of slots on the circumference of the cross-section.)	-	1000	.
7.5 and Table 10 Fig 2A & 2B(Summation of slot lengths over internal circumference of the cross- section.)	-	1000	.
7.4 Table 8 & 9 Fig 1(Segmental length for Spigot (average of 4.0))	-	1000	.
7.4 Table 8 & 9 Fig 1(Segmental length,mm for socket (average of 4.0))	-	1000	.
7.4 Table 8 & 9 Fig 1(Segmental length, l3)	-	1000	.
7.4 Table 8 & 9 Fig 1(Effective length, l2)	-	1000	.
7.3.2(Rib height)	-	1000	.
7.3.1(No.of Ribs)	-	1000	.
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Max)	-	1000	.
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Min)	-	1000	.
7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Mean outside dia over connection,mm (Take 4 reading and maximum valu reported))	-	1000	.
7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point, Max)	-	1000	.
7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point , Min)	-	1000	.
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe , Max)	-	1000	.
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe, Min)	-	1000	.
7.2 and Table 5, 6 & 7 Fig 1B(Nominal Diameter)	-	1000	.
7.2 and Table 5, 6 & 7 Fig 1B(DIMENSIONS - Casing Pipes)	-	1000	.
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Wall thickness)	-	1000	.
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Mean Outer Diameter over Connection)	-	1000	.
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Outer Diameter at any point )	-	1000	.
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Mean Outer Diameter of Pipe)	-	1000	.
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Nominal Diameter)	-	1000	.
11(Marking)	-	1000	.
5.1(Materials)	-	1000	.
8(Packing)	-	1000	.
4.1.3(Cross Chain Length)	-	1000	.
7.2(Link Twisted (Cross chain))	-	1000	.
7.3(The Basic chains)	-	1000	.
7.9(Case Depth)	-	1000	.
8(Marking)	-	1000	.
Cl 9.7(Effect on Water Lead (first extraction))	-	3000	.
Cl 9.7(Effect on Water Lead (third extraction))	-	3000	.
Cl 9.7(Effect on Water Dialkyl tin C4 and higher homologues(measuredas tin )(third extraction ))	-	3000	.
Cl 9.7(Effect on Water Cadmium (mean of first extraction, second extraction and third extraction))	-	3000	.
Cl 9.7(Effect on Water Mercury (mean of first extraction, second extraction and third extraction))	-	3000	.
8.2(Threading of casing pipe As per IS 554 (from 40 to 80mm DN) Number of threads in 25.4mm Pitch (P) Height of thread (h) Major (Gauge Diameter) d Pitch(d2) Minor (d1) External Thread gauge length Nominal No. of turns of thread max min )	-	1000	.
8.3.1 & 8.3.2 (Threading of casing pipe (from 100 to 200 DN Table – 11 & Fig. 3A) & (from 250 to 400 DN Table – 12 & Fig. 4A) Outside diameter d1(+0, -0.3) d2 d3 D1 (+0.3, -0) D2 D4 D5 (+0.3, -0) Z h3 (+0, -0.1) H4 (+0, -0.1) )	-	1000	.
8.4(Width b)	-	1000	.

15 May, 2027

-
Included w.e.f 11.12.2025

3264

Customer Services & Development Center, HPCL-Mittal Energy Limited, Noida

8171106

IS 7328 (2020)

Specification for Polyethylene Material for Moulding and Extrusion ( Third Revision )

Polyethylene

1500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.1.1(Density)	-	1500	The test charge is in INR and for one sample
5.2.1.2(MFI)	-	1500	The test charge is in INR and for one sample
5.3.2 Table 6 IS 13360 (Part 5/Sec1)(Tensile strength at yield)	-	2000	The test charge is in INR and for one sample
5.3.2 Table 6 IS 13360 (Part 5/Sec1)(Elongation at yield)	-	2000	The test charge is in INR and for one sample
5.3.2 Table 6 IS 13360 (Part 5/Sec1)(Tensile strength at break)	-	2000	The test charge is in INR and for one sample
5.3.2 Table 6 IS 13360 (Part 5/Sec1)(Elongation at break)	-	2000	The test charge is in INR and for one sample
5.3.2 Table 6 IS 13360 (Part 5/Sec7)(Flexural modulas)	-	2000	The test charge is in INR and for one sample
5.3.2 Table 6 IS 13360 (Part 5/Sec4)(Izod/Charpy impact strength)	-	2000	The test charge is in INR and for one sample
5.3.2 Table 6 IS 13360 (Part 5/Sec11)(Shore Aor D hardness)	-	1500	The test charge is in INR and for one sample
5.3.2 Table 6 IS 13360 (Part 11/Sec1)(Coeffiicient of friction)	-	1500	The test charge is in INR and for one sample
5.3.2 Table 6 IS 13360 (Part 6/Sec3)(Heat deflection temperature)	-	2000	The test charge is in INR and for one sample
5.3.2 Table 6 IS 13360 (Part 6/Sec1)(Vicat softening temperature)	-	2000	The test charge is in INR and for one sample
Annex B of IS 4984 5.3.2 Table6(Oxidation induction time)	-	4000	The test charge is in INR and for one sample
4 of IS 7016 (part 8)(Oven ageing)	-	1800	The test charge is in INR for 24 hrs
IS 13360(part 9/Sec7)(Specular gloss)	-	1500	The test charge is in INR and for one sample
IS 13360(part 9/Sec5)(Haze or luminious transmittance)	-	1500	The test charge is in INR and for one sample
IS 13360(part 9/Sec9)/ASTME313(Yellowness index or whiteness index)	-	1500	The test charge is in INR and for one sample
5.3.2 Table 6 IS 13360 (Part 5/Sec23)(Tear Strength)	-	2000	The test charge is in INR and for one sample
5.3.2 Table 6 IS 13360 (Part 5/Sec6)(Dart Impact strength)	-	2000	The test charge is in INR and for one sample
Clause 6.4.2(Overall Migration, IS 9845, Annex D.2)	-	9500	-

28 Jul, 2028

-
-

3265

Customer Services & Development Center, HPCL-Mittal Energy Limited, Noida

8171106

IS 10951 (2020)

Specification for Polypropylene ( PP ) Materials for Moulding and Extrusion ( Second Revision )

Specification of PP materials for Moulding & Extrusion

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 3.5.1,Table-3 or Clause 6.2.1.1(Melt Mass Flow-Rate (MFR) or Melt Flow Index,g/10min,IS 13360 (Part 4/Sec 1)/ASTM D1238)	-	1500	-
Clause 3.5.2,Table-4 or Clause 6.2.1.2(Flexural Modulus,Mpa,IS 13360 (Part 5/ Sec 7),ASTM D790)	-	2000	-
Clause 3.5.3,Table-5 or Clause 6.2.1.3(Izod Impact Strength,J/m,IS 13360 (Part 5/Sec 4)/ASTM D256)	-	2000	-
Clause 6.3.2,Table-8, Sl no.1(Tensile yield strength, Mpa,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 2))	-	2000	-
Clause 6.3.2,Table-8, Sl no.1(Elongation at yield, %, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 2))	-	2000	-
Clause 6.3.2,Table-8, Sl no.1(Tensile strength at break, Mpa, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 2))	-	2000	-
Clause 6.3.2,Table-8, Sl no.1(Elongation at break, percent, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 2))	-	2000	-
Clause 6.3.2,Table-8, Sl no.1(Charpy impact strength, KJ/m2, IS 13360 (Part 5/Sec 5))	-	2000	-
Clause 6.3.2,Table-8, Sl no.1(Hardness – Rockwell R, Shore D,IS 13360 (Part 5/Sec 13),IS 13360 (Part 5/Sec 11))	-	1500	-
Clause 6.3.2,Table-8, Sl no.2(Melting temperature,ᴼC,IS 13360 (Part 6/Sec 10))	-	4000	-
Clause 6.3.2,Table-8, Sl no.2(Temperature of deflection under load,°C,IS 13360 (Part 6/ Sec 3),IS 13360 (Part 6/ Sec 17))	-	2000	-
Clause 6.3.2,Table-8, Sl no.2(Vicat softening temperature, ᴼC,S 13360 (Part 6/Sec 1))	-	2000	-
Clause 6.3.2,Table-8, Sl no.4(Water absorption,%,IS 13360 (Part 8/ Sec 1))	-	1500	-
Clause 6.3.2,Table-8, Sl no.4(Density,kg/m3,IS 13360 (Part 3/ Sec 10),IS 13360 (Part 3/ Sec 11))	-	1500	-
Clause 3.5.1,Table-3 or Clause 6.2.1.1(Melt Mass Flow-Rate (MFR) or Melt Flow Index,g/10min,IS 13360 (Part 4/Sec 1)/ASTM D1238)	-	1500	-
Clause 3.5.2,Table-4 or Clause 6.2.1.2(Flexural Modulus,Mpa,IS 13360 (Part 5/ Sec 7),ASTM D790)	-	2000	-
Clause 3.5.3,Table-5 or Clause 6.2.1.3(Izod Impact Strength,J/m,IS 13360 (Part 5/Sec 4)/ASTM D256)	-	1999.99	-
Clause 6.3.2,Table-8, Sl no.1(Tensile yield strength, Mpa,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 2))	-	1999.98	-
Clause 6.3.2,Table-8, Sl no.1(Elongation at yield, %, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 2))	-	2000	-
Clause 6.3.2,Table-8, Sl no.1(Tensile strength at break, Mpa, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 2))	-	2000	-
Clause 6.3.2,Table-8, Sl no.1(Elongation at break, percent, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 2))	-	1999.99	-
Clause 6.3.2,Table-8, Sl no.1(Charpy impact strength, KJ/m2, IS 13360 (Part 5/Sec 5))	-	2000	-
Clause 6.3.2,Table-8, Sl no.1(Hardness – Rockwell R, Shore D,IS 13360 (Part 5/Sec 13),IS 13360 (Part 5/Sec 11))	-	1500	-
Clause 6.3.2,Table-8, Sl no.2(Melting temperature,ᴼC,IS 13360 (Part 6/Sec 10))	-	4000	-
Clause 6.3.2,Table-8, Sl no.2(Temperature of deflection under load,°C,IS 13360 (Part 6/ Sec 3),IS 13360 (Part 6/ Sec 17))	-	2000	-
Clause 6.3.2,Table-8, Sl no.2(Temperature of deflection under load,°C,IS 13360 (Part 6/ Sec 3),IS 13360 (Part 6/ Sec 17))	-	2000	-
Clause 6.3.2,Table-8, Sl no.2(Vicat softening temperature, ᴼC,S 13360 (Part 6/Sec 1))	-	2000	-
Clause 6.3.2,Table-8, Sl no.4(Water absorption,%,IS 13360 (Part 8/ Sec 1))	-	2000	-
Clause 6.3.2,Table-8, Sl no.4(Density,kg/m3,IS 13360 (Part 3/ Sec 10),IS 13360 (Part 3/ Sec 11))	-	1500	-
6.1(The material shall be uniform and free from foreign matter.)	-	1000	-
Clause 6.4.2(Overall Migration, IS 9845, Annex D.2)	-	9500	-

28 Jul, 2028

-
-

3266

EMC Testing and Compliance LLP, Gurugram

8141526

IS 302 : Part 2 : Sec 80 (2017)

Household and similar electrical appliances - Safety: Part 2 - 80 particular requirements for fans (First Revision)

250V for 1Ph, 480V for 3Ph

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Marking and Instructions)	-	1000	10 % discount on BIS samples
7.0(Classification)	-	1000	10 % discount on BIS samples
8.0(Protection against access to live parts)	-	2000	10 % discount on BIS samples
10.0(Input and Current)	-	4000	10 % discount on BIS samples
11.0(Heating)	-	2000	10 % discount on BIS samples
13.0(Leakage Current and electric strength at operating temperature)	-	2500	10 % discount on BIS samples
14.0(Transient Overvoltage)	-	4000	10 % discount on BIS samples
15.0(Moisture resistance)	-	4000	10 % discount on BIS samples
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	2500	10 % discount on BIS samples
17.0(Overload Protection of transformer and associated circuit)	-	4000	10 % discount on BIS samples
19.0(Abnormal Operation)	-	4000	10 % discount on BIS samples
20.0(Stability and mechanical hazards)	-	4000	10 % discount on BIS samples; 302-2-80; A1: 2023
21.0(Mechanical Strength)	-	4000	10 % discount on BIS samples 302-2-80; A1: 2023
22.0(Construction)	-	4000	10 % discount on BIS samples
23.0(Internal Wiring)	-	4000	10 % discount on BIS samples
24.0(Components)	-	2000	10 % discount on BIS samples
25.0(Supply Connection and External Flexible Cords)	-	4000	10 % discount on BIS samples
26.0(Terminals for external conductors)	-	4000	10 % discount on BIS samples
27.0(Provision For Earthing)	-	4000	10 % discount on BIS samples
28.0(Screws and Connections)	-	4000	10 % discount on BIS samples
29.0(Creepage Distances and Clearances)	-	4000	10 % discount on BIS samples
30.0(Resistance To Heat and Fire)	-	4000	10 % discount on BIS samples
31.0(Resistance To Rusting)	-	4000	10 % discount on BIS samples

19 Jul, 2027

-
-

3267

EMC Testing and Compliance LLP, Gurugram

8141526

IS 302 : Part 2 : Sec 35 (2017)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 35 electric instantaneous water heaters (Second Revision)

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.31(Verification)	-	1000	-
Cl.30(Verification)	-	1000	-
CL.29(Verification)	-	1000	-
Cl.28(Verification)	-	1000	-
Cl.27(Verification)	-	1000	-
Cl.26(Verification)	-	1000	-
Cl.25(Verification)	-	1000	-
Cl.24(Verification)	-	1000	-
Cl.23(Verification)	-	1000	-
Cl.22(Verification)	-	1000	-
Cl.21(Verification)	-	1000	-
Cl.20(Verification)	-	2000	-
Cl.19(Verification)	-	2000	-
Cl. 16(Verification)	-	2000	-
Cl.15(Verification)	-	2000	-
Cl.14(Verification)	-	2000	-
Cl.13(Verification)	-	2000	-
Cl.11(Verification)	-	2000	-
Cl.10(Verification)	-	2000	-
Cl.8(Verification)	-	2000	-
Cl. 7(Verification)	-	2000	-
Cl. 7(Verification)	-	2000	-
Cl. 31 IS 302-2-35(Resistance to Rusting)	-	2000	-
Cl. 30 IS 302-2-35(Resistance to Heat Fire & Tracking )	-	2000	-
Cl. 29 IS 302-2-35(Clearances, Creepage Distances & Solid insulation )	-	2000	-
Cl. 28 IS 302-2-35(Screws & Connections)	-	2000	-
Cl. 27 IS 302-2-35(Provision for Earthing )	-	2000	-
Cl. 26 IS 302-2-35(Terminals for External conductors )	-	2000	-
Cl. 25 IS 302-2-35(Supply Connection & External Flexible Cords)	-	2000	-
Cl. 24 IS 302-2-35(Components)	-	1000	-
Cl. 23 IS 302-2-35(Internal Wiring)	-	2000	-
Cl. 22 IS 302-2-35(Construction )	-	2000	-
Cl. 21 IS 302-2-35(Mechanical strength)	-	2000	-
Cl. 20 IS 302-2-35(Stability & Mechanical Hazards)	-	2000	-
Cl. 19 IS 302-2-35(Abnormal Operation )	-	2000	-
Cl. 18 IS 302-2-35(Endurance)	-	2000	-
Cl. 17 IS 302-2-35(Overload Protection of Transformers and Associated Circuit)	-	2000	-
Cl. 16 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	2000	-
Cl. 15 IS 302-2-35(Moisture Resistance Test )	-	3000	-
Cl. 14 IS 302-2-35(Radio and television interference suppression / Transient over voltages)	-	2000	-
Cl. 13 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature)	-	2000	-
Cl. 11 IS 302-2-35(Heating)	-	2000	-
Cl. 10 IS 302-2-35(Power Input and Current )	-	2000	-
Cl. 9 IS 302-2-35(Starting of motor operated appliances)	-	2000	-
Cl. 8 IS 302-2-35(Protection against access to live parts)	-	2000	-
Cl. 7 IS 302-2-35(Marking and Instruction)	-	1000	-
Cl. 6 IS 302-2-35(Classification)	-	1000	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	1000	-
4(GENERAL REQUIREMENT)	-	1000	-
Cl.17(Verification)	-	1000	-

19 Jul, 2027

-
-

3268

CIPET, Hyderabad

6111634

IS 10951 (2020)

Specification for Polypropylene ( PP ) Materials for Moulding and Extrusion ( Second Revision )

Polypropylene ( PP ) Materials for Moulding and Extrus

20475 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 3.5.1,Table-3 or Clause 6.2.1.1(Melt Mass Flow-Rate (MFR) or Melt Flow Index,g/10min,IS 13360 (Part 4/Sec 1)/ASTM D1238)	-	1100	-
Clause 3.5.2,Table-4 or Clause 6.2.1.2(Flexural Modulus,Mpa,IS 13360 (Part 5/ Sec 7),ASTM D790)	-	1300	Specimen Preparation - 500
Clause 3.5.3,Table-5 or Clause 6.2.1.3(Izod Impact Strength,J/m,IS 13360 (Part 5/Sec 4)/ASTM D256)	-	1300	Specimen Preparation - 500
Clause 6.3.2,Table-8, Sl no.1(Tensile yield strength, Mpa,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 2))	-	1300	Specimen Preparation - 500
Clause 6.3.2,Table-8, Sl no.1(Elongation at yield, %, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 2))	-	0	-
Clause 6.3.2,Table-8, Sl no.1(Tensile strength at break, Mpa, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 2))	-	1300	-
Clause 6.3.2,Table-8, Sl no.1(Elongation at break, percent, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 2))	-	0	-
Clause 6.3.2,Table-8, Sl no.1(Charpy impact strength, KJ/m2, IS 13360 (Part 5/Sec 5))	-	1300	Specimen Preparation - 500
Clause 6.3.2,Table-8, Sl no.1(Hardness – Rockwell R, Shore D,IS 13360 (Part 5/Sec 13),IS 13360 (Part 5/Sec 11))	-	500	-
Clause 6.3.2,Table-8, Sl no.2(Melting temperature,ᴼC,IS 13360 (Part 6/Sec 10))	-	2000	-
Clause 6.3.2,Table-8, Sl no.2(Temperature of deflection under load,°C,IS 13360 (Part 6/ Sec 3),IS 13360 (Part 6/ Sec 17))	-	1100	Specimen Preparation - 500
Clause 6.3.2,Table-8, Sl no.2(Vicat softening temperature, ᴼC,S 13360 (Part 6/Sec 1))	-	1100	-
Clause 6.3.2,Table-8, Sl no.2(Flammability, mm/min,IS/ IEC 60695-11-10)	-	2900	-
Clause 6.3.2,Table-8, Sl no.3(Volume resistivity,IS 2071 (Part 1))	-	1100	Specimen Prepa - 500
Clause 6.3.2,Table-8, Sl no.3(Surface resistivity,IS 2071 (Part 1))	-	1100	-
Clause 6.3.2,Table-8, Sl no.4(Water absorption,%,IS 13360 (Part 8/ Sec 1))	-	600	Specimen Prepa - 500
Clause 6.3.2,Table-8, Sl no.4(Density,kg/m3,IS 13360 (Part 3/ Sec 10),IS 13360 (Part 3/ Sec 11))	-	700	Specimen charges - 500
Clause 6.4.2(Pigments and colourants, IS 9833, Annex D.1)	-	1700	-
Clause 6.4.2(Overall Migration, IS 9845, Annex D.2)	-	1700	Specimen - 300
6.1(The material shall be uniform and free from foreign matter.)	-	2000	-
Clause 6.3.2,Table-8, Sl no.2(Ignitability (Oxygen index), percent,IS 13360 (Part 6/Sec 19))	-	1200	total rates after 25 % discount + spec charges extra

23 Feb, 2027

-
-

3269

CIPET, Hyderabad

6111634

IS 7328 (2020)

Specification for Polyethylene Material for Moulding and Extrusion ( Third Revision )

Polyethylene Material for Moulding & Extrusion

79525 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.1.1(Density)	-	700	-
5.2.1.2(MFI)	-	1100	-
5.3.2 Table 6 IS 13360 (Part 5/Sec1)(Tensile strength at yield)	-	1300	Specimen Prep 500
5.3.2 Table 6 IS 13360 (Part 5/Sec1)(Elongation at yield)	-	0	-
5.3.2 Table 6 IS 13360 (Part 5/Sec1)(Tensile strength at break)	-	1300	Specimen Prep 500
5.3.2 Table 6 IS 13360 (Part 5/Sec1)(Elongation at break)	-	0	-
5.3.2 Table 6 IS 13360 (Part 5/Sec7)(Flexural modulas)	-	1300	Specimen Prep 500
5.3.2 Table 6 IS 13360 (Part 5/Sec23)(Tear Strength)	-	1300	-
5.3.2 Table 6 IS 13360 (Part 5/Sec6)(Dart Impact strength)	-	850	-
5.3.2 Table 6 IS 13360 (Part 5/Sec4)(Izod/Charpy impact strength)	-	1300	Spec -500
5.3.2 Table 6 IS 13360 (Part 5/Sec11)(Shore Aor D hardness)	-	500	-
5.3.2 Table 6 IS 13360 (Part 11/Sec1)(Coeffiicient of friction)	-	850	-
5.3.2 Table 6 IS 13360 (Part 6/Sec3)(Heat deflection temperature)	-	1100.0	Spec prep-500
5.3.2 Table 6 IS 13360 (Part 6/Sec1)(Vicat softening temperature)	-	1100.0	-
Annex B of IS 4984 5.3.2 Table6(Oxidation induction time)	-	2200.0	-
IS 3396(Surface resistivity)	-	1100	-
IS 3397(Volume resistivity)	-	1100.0	-
5.5.6 IS 2530(Carbon black dispersion)	-	700	-
5.4.3 10 ofIS 2530(Carbon black content)	-	925	-
IS 13360(part8/Sec1)(Water absorption)	-	600.0	Spec -500
5.4.35 15 ofIS 2530(Colour fastness to daylight)	-	19850.0	-
5.4.2 13 ofIS 2530(Colour fastness to water)	-	1750.0	-
5.4.1 12 of IS 2530(Colour bleeding)	-	3800.0	-
IS 13360(part 8/Sec9)(ESCR)	-	1200.0	-
IS 13360(part 9/Sec10)(Colour bleeding)	-	0	-
Annex C of IS4984(Volatile content)	-	700.0	-
4 of IS 7016 (part 8)(Oven ageing)	-	4200.0	-
IS 13360(part 9/Sec8)(Transparency)	-	1500.0	-
IS15827(Natural/artificial weathering)	-	1874000	For 10,700 Hours (at 420 nm, 0.35 W/m2). Amount may vary with exposure hours. Not included in Complete Testing Charges
IS 13360(part 9/Sec7)(Specular gloss)	-	1500.0	-
IS 13360(part 9/Sec5)(Haze or luminious transmittance)	-	1500.0	-
5.5.1(All additives used in the material which is meant for usage in contact with foodstuffs, pharmaceuticals and drinking water are given in IS 16738 for guidance purpose.)	-	0	-
5.5.2(When the products are used in contact with foodstuffs, pharmaceuticals and drinking water, its requirements with respect to the material shall also be met as per 3.3, 3.4 and 3.5 of IS 10146.)	-	2000.0	-
Clause 6.4.2(Pigments and colourants, IS 9833, Annex D.1)	-	17500.0	-
Clause 6.4.2(Overall Migration, IS 9845, Annex D.2)	-	1700	Natural weathering extra cost & discount 25 % on test charges

23 Feb, 2027

-
-

3270

Standard Testing Laboratory Private Limited

8170106

IS 617 (2024)

Aluminium and Aluminium Alloys Ingots for Remelting and Castings for General Engineering Purposes â Specification (Fourth Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6.1, Table-1(Si)	-	12000	-
Cl-6.1, Table-1(Fe)	-	12000	-
Cl-6.1, Table-1(Cu)	-	12000	-
Cl-6.1, Table-1(Mn)	-	12000	-
Cl-6.1, Table-1(Mg)	-	12000	-
Cl-6.1, Table-1(Cr)	-	12000	-
Cl-6.1, Table-1(Ni)	-	12000	-
Cl-6.1, Table-1(Zn)	-	12000	-
Cl-6.1, Table-1(Pb)	-	12000	-
Cl-6.1, Table-1(Sn)	-	12000	-
Cl-6.1, Table-1(Ti)	-	12000	-
Cl-6.1, Table-1(Others elements Each)	-	12000	-
Cl-6.1, Table-1(Others elements Total)	-	12000	-
Cl-6.1, Table-1(Aluminium)	-	12000	-
Cl-6.2(The chemical analysis)	-	12000	-
Cl-7.1, Table-2(Sand-Cast Alloys- Tensile Strength)	-	12000	-
Cl-7.1, Table-2(Sand-Cast Alloys- Proof Stress)	-	12000	-
Cl-7.1, Table-2(Sand-Cast Alloys- Elongation)	-	12000	-
Cl-7.1, Table-2(Sand-Cast Alloys- Brinell Hardness HBW)	-	12000	-
Cl-7.1, Table-3(Chill Cast Alloys- Tensile Strength)	-	12000	-
Cl-7.1, Table-3(Chill Cast Alloys- Proof Stress)	-	12000	-
Cl-7.1, Table-3(Chill Cast Alloys- Elongation)	-	12000	-
Cl-7.1, Table-3(Chill Cast Alloys- Brinell Hardness HBW)	-	12000	-
Cl-7.1, Table-4(Investment-Cast Alloys- Tensile Strength)	-	12000	-
Cl-7.1, Table-4(Investment-Cast Alloys- Proof Stress)	-	12000	-
Cl-7.1, Table-4(Investment-Cast Alloys- Elongation)	-	12000	-
Cl-7.1, Table-4(Investment-Cast Alloys-Brinell Hardness)	-	12000	-
Cl-7.2(Tensile Tests)	-	12000	-
Cl-7.3(Test Pieces)	-	12000	-
Cl-7.4(Hardness)	-	12000	-
Cl-8(Freedom from Defects)	-	12000	-
Cl-11(RETEST)	-	12000	-
Cl-13(Marking)	-	12000	-
Cl. 6(Silicon)	-	12000	-
Cl. 6(Iron)	-	12000	-
Cl. 6(Copper)	-	12000	-
Cl. 6(Manganese)	-	12000	-
Cl. 6(Magnesium)	-	12000	-
Cl. 6(Chromium)	-	12000	-
Cl. 6(Nickel)	-	12000	-
Cl. 6(Zinc)	-	12000	-
Cl. 6(Lead)	-	12000	-
Cl. 6(Tin)	-	12000	-
Cl. 6(Titanium)	-	12000	-
Cl. 6(Others Element Each)	-	12000	-
Cl. 6(Others Element Total)	-	12000	-
Cl. 6(Aluminium)	-	12000	-
Cl. 6(Silver)	-	12000	-
Cl. 6(Zirconium)	-	12000	-
Cl. 6(Titanium+Zirconium)	-	12000	-
Cl. 6(Antimony)	-	12000	-
Cl. 6(Cobalt)	-	12000	-
Cl. 6(Antimony+Cobalt)	-	12000	-
Cl. 6(Beryllium)	-	12000	-
10(Pressure Test)	-	12000	-

10 Apr, 2028

-
Included w.e.f 28.10.2025

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number