BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15378 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

3271

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 14252 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sack for filling sand – Specification (second revision)

All

16500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Raw Material)	-	700	-
3.2(Tapes – Width )	-	700	-
3.2(Tapes – Linear Density )	-	700	-
3.3(Tying Cord)	-	700	-
3.3(Tying Cord)	-	700	-
3.3(Tying Cord)	-	700	-
3.4(Sack)	-	700	-
3.4.1(Seam)	-	700	-
3.4.1(Seam)	-	700	-
3.4.1(Seam)	-	700	-
3.4.1(Seam)	-	700	-
4.1 and Table 1 i a(Dimensions Outside Length)	-	700	-
4.1 and Table 1 i b(Dimensions Outside Width)	-	700	-
4.1 and Table 1 ii(Ends per dm )	-	700	-
4.1 and Table 1 iii(Picks per dm )	-	700	-
4.2 and Table 1 iv(Mass of sack )	-	700	-
4.1 and Table 1 v a(Average breaking strength of fabric Warpway )	-	700	-
4.1 and Table 1 v b(Average breaking strength of fabric Weftway )	-	700	-
4.1 and Table 1 vi(Average Breaking strength of bottom seam )	-	700	-
4.1 and Table 1 vii a(Elongation at break of fabric Lengthwise)	-	800	-
4.1 and Table 1 vii b(Elongation at break of fabric Widthwise )	-	800	-
4.1 and Table 1 viii(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	800	-
4.1 and Table 1 ix(Ash content )	-	800	-
3.1(Raw Material)	-	0	-
3.2(Tapes – Width )	-	0	-
3.2(Tapes – Linear Density )	-	0	-
3.3(Tying Cord)	-	0	-
3.3(Tying Cord)	-	0	-
3.3(Tying Cord)	-	0	-
3.4(Sack)	-	0	-
3.4.1(Seam)	-	0	-
3.4.1(Seam)	-	0	-
3.4.1(Seam)	-	0	-
3.4.1(Seam)	-	0	-
4.1 and Table 1 i a(Dimensions Outside Length)	-	0	-
4.1 and Table 1 i b(Dimensions Outside Width)	-	0	-
4.1 and Table 1 ii(Ends per dm )	-	0	-
4.1 and Table 1 iii(Picks per dm )	-	0	-
4.2 and Table 1 iv(Mass of sack )	-	0	-
4.1 and Table 1 v a(Average breaking strength of fabric Warpway )	-	0	-
4.1 and Table 1 v b(Average breaking strength of fabric Weftway )	-	0	-
4.1 and Table 1 vi(Average Breaking strength of bottom seam )	-	0	-
4.1 and Table 1 vii a(Elongation at break of fabric Lengthwise)	-	0	-
4.1 and Table 1 vii b(Elongation at break of fabric Widthwise )	-	0	-
4.1 and Table 1 viii(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	0	-
4.1 and Table 1 ix(Ash content )	-	0	-
3.2 (Mesh size and weight is g/cm2) (amendment 3)(Mesh size and weight is g/cm2)	-	0	-
3.1(Raw Material)	-	0	-
3.2(Tapes – Width )	-	0	-
3.2(Tapes – Linear Density )	-	0	-
3.3(Tying Cord)	-	0	-
3.3(Tying Cord)	-	0	-
3.3(Tying Cord)	-	0	-
3.4(Sack)	-	0	-
3.4.1(Seam)	-	0	-
3.4.1(Seam)	-	0	-
3.4.1(Seam)	-	0	-
3.4.1(Seam)	-	0	-
4.1 and Table 1 i a(Dimensions Outside Length)	-	0	-
4.1 and Table 1 i b(Dimensions Outside Width)	-	0	-
4.1 and Table 1 ii(Ends per dm )	-	0	-
4.1 and Table 1 iii(Picks per dm )	-	0	-
4.2 and Table 1 iv(Mass of sack )	-	0	-
4.1 and Table 1 v a(Average breaking strength of fabric Warpway )	-	0	-
4.1 and Table 1 v b(Average breaking strength of fabric Weftway )	-	0	-
4.1 and Table 1 vi(Average Breaking strength of bottom seam )	-	0	-
4.1 and Table 1 vii a(Elongation at break of fabric Lengthwise)	-	0	-
4.1 and Table 1 vii b(Elongation at break of fabric Widthwise )	-	0	-
4.1 and Table 1 viii(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	0	-
4.1 and Table 1 ix(Ash content )	-	0	-
3.1(Raw Material)	-	0	-
3.2(Tapes – Width )	-	0	-
3.2(Tapes – Linear Density )	-	0	-
3.3(Tying Cord)	-	0	-
3.3(Tying Cord)	-	0	-
3.3(Tying Cord)	-	0	-
3.4(Sack)	-	0	-
3.4.1(Seam)	-	0	-
3.4.1(Seam)	-	0	-
3.4.1(Seam)	-	0	-
3.4.1(Seam)	-	0	-
4.1 and Table 1 i a(Dimensions Outside Length)	-	0	-
4.1 and Table 1 i b(Dimensions Outside Width)	-	0	-
4.1 and Table 1 ii(Ends per dm )	-	0	-
4.1 and Table 1 iii(Picks per dm )	-	0	-
4.2 and Table 1 iv(Mass of sack )	-	0	-
4.1 and Table 1 v a(Average breaking strength of fabric Warpway )	-	0	-
4.1 and Table 1 v b(Average breaking strength of fabric Weftway )	-	0	-
4.1 and Table 1 vi(Average Breaking strength of bottom seam )	-	0	-
4.1 and Table 1 vii a(Elongation at break of fabric Lengthwise)	-	0	-
4.1 and Table 1 vii b(Elongation at break of fabric Widthwise )	-	0	-
4.1 and Table 1 viii(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	0	-
4.1 and Table 1 ix(Ash content )	-	0	-
3.2 (Mesh size and weight is g/cm2) (amendment 3)(Mesh size and weight is g/cm2)	-	0	-

08 May, 2028

-
Included w.e.f.29.09.2025

3272

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS 4246 (2025)

DOMESTIC GAS STOVE AND BUILT IN HOB FOR USE WITH LPG SPECIFICATION (Sixth Revision )

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(General - IS 4246 : 2025)	-	500	-
4.1(General - IS 4246 : 2025)	-	500	-
4.1.1(General - IS 4246 : 2025)	-	500	-
5(Materials - Cl. 5 of IS 5116)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1(Materials - IS 5116)	-	500	-
5.1(Materials - IS 5116)	-	500	-
5.1.1(Materials - IS 5116)	-	500	-
5.1.1(Materials - IS 5116)	-	500	-
5.2(Materials - IS 5116)	-	500	-
5.2(Materials - IS 5116)	-	500	-
5.3(Materials - IS 5116)	-	500	-
5.5(Materials - IS 5116)	-	500	-
5.5(Materials - IS 5116)	-	500	-
5.5(Materials - IS 5116)	-	500	-
5.7(Materials - IS 5116)	-	500	-
6.1(Design for Maintainance)	-	500	-
6.1(Design for Maintainance)	-	500	-
6.2(Design for Maintainance)	-	500	-
6.2(Design for Maintainance)	-	500	-
6.3(Design for Maintainance)	-	500	-
6.4(Design for Maintainance)	-	500	-
6.5(Design for Maintainance)	-	500	-
6.6(Design for Maintainance)	-	500	-
7.0(Rigidity and Stability)	-	500	-
7.1(Rigidity and Stability)	-	500	-
7.2(Rigidity and Stability)	-	500	-
7.3(Rigidity and Stability)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.2(Workmanship and Finish -)	-	500	-
8.3(Workmanship and Finish -)	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
10(Injector Jets)	-	500	-
10(Injector Jets)	-	500	-
10(Injector Jets)	-	500	-
10(Injector Jets)	-	500	-
10(Injector Jets)	-	500	-
10(Injector Jets)	-	500	-
11.1(Burners- Cl. 10 of IS 5116)	-	500	-
11.1(Burners- Cl. 10 of IS 5116)	-	500	-
11.1(Burners- Cl. 10 of IS 5116)	-	500	-
11.1(Burners- Cl. 10 of IS 5116)	-	500	-
11.1(Burners- Cl. 10 of IS 5116)	-	500	-
11.2(Burners)	-	500	-
11.3(Burners)	-	500	-
11.4(Burners)	-	500	-
12.1(Burner Pan Support)	-	500	-
12.2(Burner Pan Support)	-	500	-
12.3(Burner Pan Support)	-	500	-
13.1(Gas Soundness Test - Cl. 16 of IS 5116)	-	500	-
13,2(Gas Soundness Test)	-	500	-
13.2(Gas Leak Detector)	-	500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	500	-
14.2(Gas Inlet Connection)	-	500	-
14.2(Gas Inlet Connection)	-	500	-
14.2(Gas Inlet Connection)	-	500	-
14.2(Gas Inlet Connection)	-	500	-
14.3(Gas Inlet Connection)	-	500	-
14.4(Gas Inlet Connection)	-	500	-
14.5(Gas Inlet Connection - Cl. 17.3 of IS 5116)	-	500	-
14.6(Gas Inlet Connection)	-	500	-
15.0(Strength and Rigidity)	-	500	-
15.0(Strength and Rigidity)	-	500	-
15.0(Strength and Rigidity)	-	500	-
15.0(Strength and Rigidity)	-	500	-
17.0(Gas Consumption Test)	-	500	-
17.0(Gas Consumption Test)	-	500	-
17.0(Gas Consumption Test)	-	500	-
17.0(Gas Consumption Test)	-	500	-
17.0(Gas Consumption Test)	-	500	-
17.0(Gas Consumption Test)	-	500	-
17.2(Gas Consumption Test - For Gas Stoves)	-	500	-
17.2 (a)(Gas Consumption Test - For Gas Stoves)	-	500	-
17.2 (b)(Gas Consumption Test - For Gas Stoves)	-	500	-
17.2 (c)(Gas Consumption Test - For Gas Stoves)	-	500	-
17.3(Gas Consumption Test - For Built in Hobs)	-	500	-
17.3.1(Gas Consumption Test - For Built in Hobs)	-	500	-
17.3.2(Gas Consumption Test - For Built in Hobs)	-	500	-
18.1(Ignition and Flame Travel)	-	500	-
18.1(Ignition and Flame Travel)	-	500	-
18.2(Ignition and Flame Travel)	-	500	-
18.3(Ignition and Flame Travel)	-	500	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	500	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	500	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	500	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	500	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	500	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	500	-
19.1(Flame Stability)	-	500	-
19.1.1(Flame Stability)	-	500	-
19.2(Flame Stability)	-	500	-
19.3(Flame Stability)	-	500	-
20(Noise Control)	-	500	-
21(Flash Back)	-	500	-
22(Formation of Soot)	-	500	-
23(Resistance to Draught)	-	500	-
24.1(Combustion)	-	500	-
24.1(Combustion)	-	500	-
24.2(Combustion)	-	500	-
25.1(Fire Hazard and Limiting Temperatures)	-	500	-
25.1(Fire Hazard and Limiting Temperatures)	-	500	-
25.1(Fire Hazard and Limiting Temperatures)	-	500	-
25.1(Fire Hazard and Limiting Temperatures)	-	500	-
25.2(Fire Hazard and Limiting Temperatures)	-	500	-
26.1(Thermal Efficiency- Gas Stoves)	-	500	-
26.1(Thermal Efficiency- Gas Stoves)	-	500	-
26.1(Thermal Efficiency- Gas Stoves)	-	500	-
26.1(Thermal Efficiency- Gas Stoves)	-	500	-
26.1(Thermal Efficiency- Gas Stoves)	-	500	-
26.2(Thermal Efficiency- For Built in Hobs)	-	500	-
26.2(Thermal Efficiency- For Built in Hobs)	-	500	-
26.2(Thermal Efficiency- For Built in Hobs)	-	500	-
26.2(Thermal Efficiency- For Built in Hobs)	-	500	-
26.2(Thermal Efficiency- For Built in Hobs)	-	500	-

-
Included w.e.f 11.09.2025

3273

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 7092 : Part 1 (1992)

Aluminium alloy tubes for irrigation purposes - Specification: Part 1 welded tubes (Second Revision)

All Designation

16500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10(Marking)	-	0	-
5(Workmanship and Finish)	-	4000	-
8(Dimensions)	-	4500	-
7.2(Mechanical properties)	-	4000	-
7.3(Flattening test)	-	4000	-
7.4(Hydrostatic test)	-	0	(Testing Charge 16000)
10(Marking)	-	0	-
5(Workmanship and Finish)	-	0	-
8(Dimensions)	-	0	-
7.2(Mechanical properties)	-	0	-
7.3(Flattening test)	-	0	-
7.4(Hydrostatic test)	-	0	-
10(Marking)	-	0	-
5(Workmanship and Finish)	-	0	-
8(Dimensions)	-	0	-
7.2(Mechanical properties)	-	0	-
7.3(Flattening test)	-	0	-
7.4(Hydrostatic test)	-	0	-

-
Included w.e.f 09.10.2025

3274

Bombay Textiles Research Association (BTRA), Mumbai

7130206

IS 702 (2022)

SPECIFICATION FOR INDUSTRIAL BITUMEN

Industrial Bitumen

37500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6-Table 1-i)(Specific gravity at 27 °C)	-	2500	-
6-Table 1-ii)(Flash point, Cleveland open cup, °C, Min)	-	2500	-
6-Table 1-iii)(Softening point, °C)	-	5000	-
6-Table 1-iv)(Penetration at 25 °C, 100g, 5 sec, 1/10 mm)	-	5000	-
6-Table 1-v)(a) Loss on heating, percent by mass, Min b) Penetration of the residue at 25 °C, 100g, 5 s, percent of original, Min)	-	15000	Total Charges a and b
6-Table 1-vi)(Ductility at 27 °C, cm, Min)	-	5000	-
6-Table 1-vii)(Matter soluble in trichloroethylene, percent by mass, Min)	-	2500	-

-
Included w.e.f 09.10.2025

3275

EKO PRO ENGINEERS PRIVATE LIMITED (32/41), GHAZIABAD

9179706

IS 15844 : Part 3 (2024)

Sports Footwear Part 3 Professional Sports Footwear

ALL

53000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6(Size and Fittings)	-	500	-
Cl-5(Design)	-	400	-
Cl-6(Size and Fittings)	-	500	-
Cl.7.1.1(Upper to Mid Sole/Out Sole, Upper to Composite Sole (Applicable Only When the Sole is Composite) and Out Sole to Mid Sole (Multilayer, if Present), Bond Performance)	-	600	-
Cl.7.1.2(Energy Absorption at Seat Region)	-	600	-
Cl.7.1.1(Upper to Mid Sole/Out Sole, Upper to Composite Sole (Applicable Only When the Sole is Composite) and Out Sole to Mid Sole (Multilayer, if Present), Bond Performance)	-	600	-
Cl.7.1.2(Energy Absorption at Seat Region)	-	700	-
Cl.7.1.3(Complete Shoe Flexing)	-	800	-
Cl.7.1.4(Washability)	-	600	-
Cl.7.1.5(Slip Resistance)	-	700	-
Cl.7.1.6(Heel Drop)	-	500	-
Cl.7.2 Table-2 S.No- (i)("Flexing resistance, Min a) Dry condition b) Wet condition")	-	600	-
Cl.7.2 Table-2 S.No- (ii)(Tear strength (average force), N, Min)	-	600	-
Cl.7.2 Table-2 S.No- (iii)("Colour fastness rubbing a-Dry b-Wet")	-	500	-
Cl.7.2 Table-2 S.No- (iv)("a) Water vapour permeability b) Water vapour coefficient")	-	500	-
Cl.7.2 Table-2 S.No- (v)(Stitch tear strength N/mm, Min)	-	600	-
Cl.7.2 Table-2 S.No- (vi)(Colour fastness to light grey scale rate)	-	500	-
Cl.7.2 Table-2 S.No- (vii)(Tensile strength)	-	600	-
Cl.7.2 Table-2 S.No- (viii)(Elongation at break, percent)	-	600	-
Cl.7.2 Table-2 S.No- (ix)("Abrasion test a) Dry b) Wet")	-	600	-
Cl.7.2 Table-3 S.No- (i)(Breaking strength, N/mm, Min)	-	600	-
Cl.7.2 Table-3 S.No- (ii)(Elongation at break, percent, Min)	-	600	-
Cl.7.2 Table-3 S.No- (iii)(Tear strength, N, Min)	-	600	-
Cl.7.2 Table-3 S.No- (iv)(Strength at needle perforation)	-	500	-
Cl.7.2 Table-3 S.No- (v)("Flexing resistance a-Dry condition, b) Wet condition")	-	500	-
Cl.7.2 Table-3 S.No- (vi)("a) Water vapour permeability b) Water vapour coefficient")	-	500	-
Cl.7.2 Table-3 S.No- (vii)(Hydrolysis resistance)	-	600	-
Cl.7.2 Table-3 S.No- (viii)(Colour fastness to light grey scale rate)	-	600	-
Cl.7.2 Table-3 S.No- (ix)(Bursting strength)	-	700	-
Cl.7.3 Table-4 S.No- (i)(Tear strength, N, Min)	-	600	-
Cl.7.3 Table-4 S.No- (ii)("Abrasion resistance, a) Dry b) Wet ")	-	700	-
Cl.7.3 Table-4 S.No- (iii)(Colour fastness to rubbing, grey scale rate with 10 rubs on dry or wet, Min)	-	600	-
Cl.7.3 Table-4 S.No- (iv)(Colour fastness to perspiration (contact method) grey scale rate, Min)	-	600	-
Cl.7.3 Table-4 S.No- (v)("a-Water vapour permeability b-Water vapour coefficient")	-	500	-
Cl.7.4 Table-5 S.No- (i)(Flexing index, Min)	-	600	-
Cl.7.4 Table-5 S.No- (ii)(Abrasion resistance)	-	600	-
Cl.7.4 Table-5 S.No- (iii)("a) Water absorption b) Water desorption")	-	600	-
Cl.7.5 Table-6 S.No- (i)("Abrasion resistance a) Dry condition b) Wet condition")	-	600	-
Cl.7.5 Table-6 S.No- (ii)("a) Water absorption b) Water desorption")	-	700	-
Cl.7.5 Table-6 S.No- (iii)(Heat resistance shrinkage linear, percent, Max)	-	700	-
Cl.7.6 Table-7 S.No- (i)(Abrasion resistance)	-	700	-
Cl.7.6 Table-7 S.No- (ii)("Flexing resistance a) Bennewart Method b) Ross flexing method")	-	600	-
Cl.7.6 Table-7 S.No- (iii)(Hydrolysis resistance)	-	700	-
Cl.7.6 Table-7 S.No- (iv)(Tear strength, N/mm, Min)	-	600	-
Cl.7.6 Table-7 S.No- (v)(Tensile strength)	-	600	-
Cl.7.6 Table-7 S.No- (vi)(Elongation at break percent, Min)	-	600	-
Cl.7.6 Table-7 S.No- (vii)(Compression set percent, Max)	-	600	-
Cl.7.7 Table-8 S.No- (i)("Compression set, percent, Max a) For EVA b) For all other material")	-	700	-
Cl.7.7 Table-8 S.No- (ii)(Split tear strength)	-	700	-
Cl.7.7 Table-8 S.No- (iii)(Heat shrinkage, percent, Ma)	-	700	-
Cl.7.7 Table-8 S.No- (iii)(Elongation at break, percent, Min)	-	600	-
Cl.7.7 Table-8 S.No- (iv)(Elongation at break, percent, Min)	-	700	-
Cl.7.8 Table-9 S.No- (i)(First dry collapsing load, hardness, N, Min)	-	500	-
Cl.7.8 Table-9 S.No- (ii)(Resilience, percent, Min)	-	600	-
Cl.7.8 Table-9 S.No- (iii)(Moisture resistance, percent, Min)	-	700	-
Cl.7.8 Table-9 S.No- (iv)("a) Initial dry area shape retention, percent, Min b) Area shape retention after 10th collapse, dry, percent, Min ")	-	600	-
Cl.7.8 Table-9 S.No- (v)(Peel strength, N/nm, Min)	-	700	-
Cl.7.9 Table-10 S.No- (i)("Peel strength, N/mm, Min a) Initial b) After 5 000 wear cycles")	-	700	-
Cl.7.9 Table-10 S.No- (ii)("Shear strength, kPa, Min a) Initial b) After 5 000 wear cycles")	-	600	-
Cl.7.10 Table-11 S.No- (i)(Limit of useful extension, percent, Min)	-	700	-
Cl.7.10 Table-11 S.No- (ii)(Needle strength, N/mm, Min)	-	600	-
Cl.7.11 Table-12 S.No- (i)(Breaking strength of lace)	-	700	-
Cl.7.11 Table-12 S.No- (ii)(Lace tag strength)	-	600	-
Cl.7.11 Table-12 S.No- (iii)(Lace to lace abrasion)	-	600	-
Cl.7.11 Table-12 S.No- (iv)(Colour fastness to water (for lace) (Contact method))	-	700	-
Cl.7.11 Table-12 S.No- (v)(Strength of buckle/ski hook/D-ring,)	-	800	-
Cl.7.11 Table-12 S.No- (vi)("Corrosion resistance (applicable for all including decorative metal part) ")	-	800	-
Cl.7.11 Table-13 S.No- (i)(Corrosion resistance (applicable for metallic spikes))	-	900	-
Cl-7.12.1, Table no. 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	900	-
Cl-7.12.1, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	900	-
Cl-7.12.1, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(vii)(Formaldehyde)	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(ix)(PCP-TeCP-TriCP polychlorophenols)	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(x)(pH)	-	500	-
Cl-7.12.1, Table no. 1 of IS 17011,(xi)(Phthalates (each individual phthalate))	-	800	-
C-7.12.1, Table no. 1 of IS 17011,(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	800	-
Cl-7.12.2(PVC is present in sports shoe)	-	700	-
Cl- 8.1(Marking)	-	500	-
Cl-6(Size and Fittings)	-	500	-
Cl-5(Design)	-	500	-
Cl-6(Size and Fittings)	-	500	-
Cl.7.1.1(Upper to Mid Sole/Out Sole, Upper to Composite Sole (Applicable Only When the Sole is Composite) and Out Sole to Mid Sole (Multilayer, if Present), Bond Performance)	-	500	-
Cl.7.1.2(Energy Absorption at Seat Region)	-	600	-
Cl.7.1.1(Upper to Mid Sole/Out Sole, Upper to Composite Sole (Applicable Only When the Sole is Composite) and Out Sole to Mid Sole (Multilayer, if Present), Bond Performance)	-	600	-
Cl.7.1.2(Energy Absorption at Seat Region)	-	600	-
Cl.7.1.3(Complete Shoe Flexing)	-	600	-
Cl.7.1.4(Washability)	-	700	-
Cl.7.1.5(Slip Resistance)	-	700	-
Cl.7.1.6(Heel Drop)	-	700	-
Cl.7.2 Table-2 S.No- (i)("Flexing resistance, Min a) Dry condition b) Wet condition")	-	700	-
Cl.7.2 Table-2 S.No- (ii)(Tear strength (average force), N, Min)	-	1000	-
Cl.7.2 Table-2 S.No- (iii)("Colour fastness rubbing a-Dry b-Wet")	-	1000	-
Cl.7.2 Table-2 S.No- (iv)("a) Water vapour permeability b) Water vapour coefficient")	-	1000	-
Cl.7.2 Table-2 S.No- (v)(Stitch tear strength N/mm, Min)	-	700	-
Cl.7.2 Table-2 S.No- (vi)(Colour fastness to light grey scale rate)	-	800	-
Cl.7.2 Table-2 S.No- (vii)(Tensile strength)	-	1000	-
Cl.7.2 Table-2 S.No- (viii)(Elongation at break, percent)	-	1000	-
Cl.7.2 Table-2 S.No- (ix)("Abrasion test a) Dry b) Wet")	-	1000	-
Cl.7.2 Table-3 S.No- (i)(Breaking strength, N/mm, Min)	-	1000	-
Cl.7.2 Table-3 S.No- (ii)(Elongation at break, percent, Min)	-	700	-
Cl.7.2 Table-3 S.No- (iii)(Tear strength, N, Min)	-	600	-
Cl.7.2 Table-3 S.No- (iv)(Strength at needle perforation)	-	700	-
Cl.7.2 Table-3 S.No- (v)("Flexing resistance a-Dry condition, b) Wet condition")	-	700	-
Cl.7.2 Table-3 S.No- (vi)("a) Water vapour permeability b) Water vapour coefficient")	-	500	-
Cl.7.2 Table-3 S.No- (vii)(Hydrolysis resistance)	-	700	-
Cl.7.2 Table-3 S.No- (viii)(Colour fastness to light grey scale rate)	-	700	-
Cl.7.2 Table-3 S.No- (ix)(Bursting strength)	-	700	-
Cl.7.3 Table-4 S.No- (i)(Tear strength, N, Min)	-	700	-
Cl.7.3 Table-4 S.No- (ii)("Abrasion resistance, a) Dry b) Wet ")	-	600	-
Cl.7.3 Table-4 S.No- (iii)(Colour fastness to rubbing, grey scale rate with 10 rubs on dry or wet, Min)	-	700	-
Cl.7.3 Table-4 S.No- (iv)(Colour fastness to perspiration (contact method) grey scale rate, Min)	-	700	-
Cl.7.3 Table-4 S.No- (v)("a-Water vapour permeability b-Water vapour coefficient")	-	700	-
Cl.7.4 Table-5 S.No- (i)(Flexing index, Min)	-	500	-
Cl.7.4 Table-5 S.No- (ii)(Abrasion resistance)	-	500	-
Cl.7.4 Table-5 S.No- (iii)("a) Water absorption b) Water desorption")	-	700	-
Cl.7.5 Table-6 S.No- (i)("Abrasion resistance a) Dry condition b) Wet condition")	-	700	-
Cl.7.5 Table-6 S.No- (ii)("a) Water absorption b) Water desorption")	-	700	-
Cl.7.5 Table-6 S.No- (iii)(Heat resistance shrinkage linear, percent, Max)	-	600	-
Cl.7.6 Table-7 S.No- (i)(Abrasion resistance)	-	600	-
Cl.7.6 Table-7 S.No- (ii)("Flexing resistance a) Bennewart Method b) Ross flexing method")	-	700	-
Cl.7.6 Table-7 S.No- (iii)(Hydrolysis resistance)	-	700	-
Cl.7.6 Table-7 S.No- (iv)(Tear strength, N/mm, Min)	-	1000	-
Cl.7.6 Table-7 S.No- (v)(Tensile strength)	-	1000	-
Cl.7.6 Table-7 S.No- (vi)(Elongation at break percent, Min)	-	1000	-
Cl.7.6 Table-7 S.No- (vii)(Compression set percent, Max)	-	1000	-
Cl.7.7 Table-8 S.No- (i)("Compression set, percent, Max a) For EVA b) For all other material")	-	1000	-
Cl.7.7 Table-8 S.No- (ii)(Split tear strength)	-	1000	-
Cl.7.7 Table-8 S.No- (iii)(Heat shrinkage, percent, Ma)	-	1000	-
Cl.7.7 Table-8 S.No- (iii)(Elongation at break, percent, Min)	-	1000	-
Cl.7.7 Table-8 S.No- (iv)(Elongation at break, percent, Min)	-	1000	-
Cl.7.8 Table-9 S.No- (i)(First dry collapsing load, hardness, N, Min)	-	1000	-
Cl.7.8 Table-9 S.No- (ii)(Resilience, percent, Min)	-	1000	-
Cl.7.8 Table-9 S.No- (iii)(Moisture resistance, percent, Min)	-	1000	-
Cl.7.8 Table-9 S.No- (iv)("a) Initial dry area shape retention, percent, Min b) Area shape retention after 10th collapse, dry, percent, Min ")	-	1000	-
Cl.7.8 Table-9 S.No- (v)(Peel strength, N/nm, Min)	-	1000	-
Cl.7.9 Table-10 S.No- (i)("Peel strength, N/mm, Min a) Initial b) After 5 000 wear cycles")	-	500	-
Cl.7.9 Table-10 S.No- (ii)("Shear strength, kPa, Min a) Initial b) After 5 000 wear cycles")	-	600	-
Cl.7.10 Table-11 S.No- (i)(Limit of useful extension, percent, Min)	-	700	-
Cl.7.10 Table-11 S.No- (ii)(Needle strength, N/mm, Min)	-	700	-
Cl.7.11 Table-12 S.No- (i)(Breaking strength of lace)	-	700	-
Cl.7.11 Table-12 S.No- (ii)(Lace tag strength)	-	600	-
Cl.7.11 Table-12 S.No- (iii)(Lace to lace abrasion)	-	600	-
Cl.7.11 Table-12 S.No- (iv)(Colour fastness to water (for lace) (Contact method))	-	600	-
Cl.7.11 Table-12 S.No- (v)(Strength of buckle/ski hook/D-ring,)	-	700	-
Cl.7.11 Table-12 S.No- (vi)("Corrosion resistance (applicable for all including decorative metal part) ")	-	600	-
Cl.7.11 Table-13 S.No- (i)(Corrosion resistance (applicable for metallic spikes))	-	500	-
Cl-7.12.1, Table no. 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(vii)(Formaldehyde)	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(ix)(PCP-TeCP-TriCP polychlorophenols)	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(x)(pH)	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(xi)(Phthalates (each individual phthalate))	-	1000	-
C-7.12.1, Table no. 1 of IS 17011,(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	1000	-
Cl-7.12.2(PVC is present in sports shoe)	-	1000	-
Cl- 8.1(Marking)	-	1000	-
Cl-6(Size and Fittings)	-	500	-
Cl-5(Design)	-	200	-
Cl-6(Size and Fittings)	-	500	-
Cl.7.1.1(Upper to Mid Sole/Out Sole, Upper to Composite Sole (Applicable Only When the Sole is Composite) and Out Sole to Mid Sole (Multilayer, if Present), Bond Performance)	-	500	-
Cl.7.1.2(Energy Absorption at Seat Region)	-	1000	-
Cl.7.1.1(Upper to Mid Sole/Out Sole, Upper to Composite Sole (Applicable Only When the Sole is Composite) and Out Sole to Mid Sole (Multilayer, if Present), Bond Performance)	-	500	-
Cl.7.1.2(Energy Absorption at Seat Region)	-	1000	-
Cl.7.1.3(Complete Shoe Flexing)	-	1000	-
Cl.7.1.4(Washability)	-	0	-
Cl.7.1.5(Slip Resistance)	-	1000	-
Cl.7.1.6(Heel Drop)	-	400	-
Cl.7.2 Table-2 S.No- (i)("Flexing resistance, Min a) Dry condition b) Wet condition")	-	1000	-
Cl.7.2 Table-2 S.No- (ii)(Tear strength (average force), N, Min)	-	500	-
Cl.7.2 Table-2 S.No- (iii)("Colour fastness rubbing a-Dry b-Wet")	-	500	-
Cl.7.2 Table-2 S.No- (iv)("a) Water vapour permeability b) Water vapour coefficient")	-	1000	-
Cl.7.2 Table-2 S.No- (v)(Stitch tear strength N/mm, Min)	-	1000	-
Cl.7.2 Table-2 S.No- (vi)(Colour fastness to light grey scale rate)	-	1000	-
Cl.7.2 Table-2 S.No- (vii)(Tensile strength)	-	1000	-
Cl.7.2 Table-2 S.No- (viii)(Elongation at break, percent)	-	1000	-
Cl.7.2 Table-2 S.No- (ix)("Abrasion test a) Dry b) Wet")	-	1000	-
Cl.7.2 Table-3 S.No- (i)(Breaking strength, N/mm, Min)	-	1000	-
Cl.7.2 Table-3 S.No- (ii)(Elongation at break, percent, Min)	-	1000	-
Cl.7.2 Table-3 S.No- (iii)(Tear strength, N, Min)	-	1000	-
Cl.7.2 Table-3 S.No- (iv)(Strength at needle perforation)	-	1000	-
Cl.7.2 Table-3 S.No- (v)("Flexing resistance a-Dry condition, b) Wet condition")	-	1000	-
Cl.7.2 Table-3 S.No- (vi)("a) Water vapour permeability b) Water vapour coefficient")	-	1000	-
Cl.7.2 Table-3 S.No- (vii)(Hydrolysis resistance)	-	1000	-
Cl.7.2 Table-3 S.No- (viii)(Colour fastness to light grey scale rate)	-	1000	-
Cl.7.2 Table-3 S.No- (ix)(Bursting strength)	-	1000	-
Cl.7.3 Table-4 S.No- (i)(Tear strength, N, Min)	-	1000	-
Cl.7.3 Table-4 S.No- (ii)("Abrasion resistance, a) Dry b) Wet ")	-	1000	-
Cl.7.3 Table-4 S.No- (iii)(Colour fastness to rubbing, grey scale rate with 10 rubs on dry or wet, Min)	-	1000	-
Cl.7.3 Table-4 S.No- (iv)(Colour fastness to perspiration (contact method) grey scale rate, Min)	-	1000	-
Cl.7.3 Table-4 S.No- (v)("a-Water vapour permeability b-Water vapour coefficient")	-	1000	-
Cl.7.4 Table-5 S.No- (i)(Flexing index, Min)	-	1000	-
Cl.7.4 Table-5 S.No- (ii)(Abrasion resistance)	-	1000	-
Cl.7.4 Table-5 S.No- (iii)("a) Water absorption b) Water desorption")	-	1000	-
Cl.7.5 Table-6 S.No- (i)("Abrasion resistance a) Dry condition b) Wet condition")	-	1000	-
Cl.7.5 Table-6 S.No- (ii)("a) Water absorption b) Water desorption")	-	1000	-
Cl.7.5 Table-6 S.No- (iii)(Heat resistance shrinkage linear, percent, Max)	-	1000	-
Cl.7.6 Table-7 S.No- (i)(Abrasion resistance)	-	1000	-
Cl.7.6 Table-7 S.No- (ii)("Flexing resistance a) Bennewart Method b) Ross flexing method")	-	1000	-
Cl.7.6 Table-7 S.No- (iii)(Hydrolysis resistance)	-	1000	-
Cl.7.6 Table-7 S.No- (iv)(Tear strength, N/mm, Min)	-	500	-
Cl.7.6 Table-7 S.No- (v)(Tensile strength)	-	1000	-
Cl.7.6 Table-7 S.No- (vi)(Elongation at break percent, Min)	-	1000	-
Cl.7.6 Table-7 S.No- (vii)(Compression set percent, Max)	-	1000	-
Cl.7.7 Table-8 S.No- (i)("Compression set, percent, Max a) For EVA b) For all other material")	-	1000	-
Cl.7.7 Table-8 S.No- (ii)(Split tear strength)	-	1000	-
Cl.7.7 Table-8 S.No- (iii)(Heat shrinkage, percent, Ma)	-	1000	-
Cl.7.7 Table-8 S.No- (iii)(Elongation at break, percent, Min)	-	1000	-
Cl.7.7 Table-8 S.No- (iv)(Elongation at break, percent, Min)	-	1000	-
Cl.7.8 Table-9 S.No- (i)(First dry collapsing load, hardness, N, Min)	-	1000	-
Cl.7.8 Table-9 S.No- (ii)(Resilience, percent, Min)	-	1000	-
Cl.7.8 Table-9 S.No- (iii)(Moisture resistance, percent, Min)	-	1000	-
Cl.7.8 Table-9 S.No- (iv)("a) Initial dry area shape retention, percent, Min b) Area shape retention after 10th collapse, dry, percent, Min ")	-	1000	-
Cl.7.8 Table-9 S.No- (v)(Peel strength, N/nm, Min)	-	1000	-
Cl.7.9 Table-10 S.No- (i)("Peel strength, N/mm, Min a) Initial b) After 5 000 wear cycles")	-	1000	-
Cl.7.9 Table-10 S.No- (ii)("Shear strength, kPa, Min a) Initial b) After 5 000 wear cycles")	-	1000	-
Cl.7.10 Table-11 S.No- (i)(Limit of useful extension, percent, Min)	-	1000	-
Cl.7.10 Table-11 S.No- (ii)(Needle strength, N/mm, Min)	-	1000	-
Cl.7.11 Table-12 S.No- (i)(Breaking strength of lace)	-	1000	-
Cl.7.11 Table-12 S.No- (ii)(Lace tag strength)	-	1000	-
Cl.7.11 Table-12 S.No- (iii)(Lace to lace abrasion)	-	1000	-
Cl.7.11 Table-12 S.No- (iv)(Colour fastness to water (for lace) (Contact method))	-	1000	-
Cl.7.11 Table-12 S.No- (v)(Strength of buckle/ski hook/D-ring,)	-	1000	-
Cl.7.11 Table-12 S.No- (vi)("Corrosion resistance (applicable for all including decorative metal part) ")	-	1000	-
Cl.7.11 Table-13 S.No- (i)(Corrosion resistance (applicable for metallic spikes))	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(vii)(Formaldehyde)	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(ix)(PCP-TeCP-TriCP polychlorophenols)	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(x)(pH)	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(xi)(Phthalates (each individual phthalate))	-	1000	-
C-7.12.1, Table no. 1 of IS 17011,(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	1000	-
Cl-7.12.2(PVC is present in sports shoe)	-	1000	-
Cl- 8.1(Marking)	-	400	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	1000	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	1000	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	1000	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	1000	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	1000	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	1000	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	1000	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	1000	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	1000	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	1000	-
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	1000	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	1000	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	1000	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	1000	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	1000	-
Cl.8 - Table No 1(Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988)	-	1000	-
Cl.4.1 (Table B-1 Sl I)(Aromatic Amines: 4-aminobiphenyl)	-	1000	-
Cl.4.1 (Table B-1 Sl II)(Aromatic Amines: Benzidine)	-	1000	-
Cl.4.1 (Table B-1 Sl III)(Aromatic Amines: 4-chloro-o-toluidine)	-	1000	-
Cl.4.1 (Table B-1 Sl IV)(Aromatic Amines: 2-naphthylamine)	-	1000	-
Cl.4.1 (Table B-1 Sl V)(Aromatic Amines :o-aminoazotoluene)	-	1000	-
Cl.4.1 (Table B-1 Sl VI)(Aromatic Amines: 2-amino-4-nitrotoluenem)	-	1000	-
Cl.4.1 (Table B-1 Sl VII)(Aromatic Amines: p-chloroaniline)	-	1000	-
Cl.4.1 (Table B-1 Sl VIII)(Aromatic Amines: 2,4-diaminoanisole)	-	1000	-
Cl.4.1 (Table B-1 Sl IX)(Aromatic Amines : 4,4’- diaminodiphenylmethane:)	-	1000	-
Cl.4.1 (Table B-1 Sl X)(Aromatic Amines : 3,3’-dichlorobenzidine)	-	1000	-
Cl.4.1 (Table B-1 Sl XI)(Aromatic Amines : 3,3’-dimethoxybenzidine)	-	1000	-
Cl.4.1 (Table B-1 Sl XII)(Aromatic Amines : 3,3’-dimethylbenzidine)	-	1000	-
Cl.4.1 (Table B-1 Sl XIII)(Aromatic Amines: 3,3’-dimethyl-4,4’-diaminodiphenylmethane)	-	1000	-
Cl.4.1 (Table B-1 Sl XIV)(Aromatic Amines : p-cresi)	-	1000	-
Cl.4.1 (Table B-1 Sl XV)(Aromatic Amines : 4,4’-methylene-bis(2-chloroaniline):)	-	1000	-
Cl.4.1 (Table B-1 Sl XVI)(Aromatic Amines :4,4’-oxydianiline)	-	1000	-
Cl.4.1 (Table B-1 Sl XVII)(Aromatic Amines:4,4’-thiodianiline)	-	1000	-
Cl.4.1 (Table B-1 Sl XVIII)(Aromatic Amines :o-toluidine:)	-	1000	-
Cl.4.1 (Table B-1 Sl XIX)(Aromatic Amines: 2,4-toluylendiamine)	-	1000	-
Cl.4.1 (Table B-1 Sl XX)(Aromatic Amines: 2,4,5-trimethylaniline)	-	1000	-
Cl.4.1 (Table B-1 Sl XXI)(Aromatic Amines :2,4-dimethylaniline)	-	1000	-
Cl.4.1 (Table B-1 Sl XXII)(Aromatic Amines: 2,6-dimethylaniline:)	-	1000	-
Cl.4.1 (Table B-1 Sl XXIII)(Aromatic Amines :2-methoxyaniline)	-	1000	-
Cl.4.1 (Table B-1 Sl XXIV)(Aromatic Amines :4-aminoazobenzene)	-	1000	-
Cl.4.1 (Table B-11)(PCP-TeCP-TriCP polychlorophenols)	-	1000	-

-
Included w.e.f 14.01.2026 Cl.7.1.4 (Washability)

3276

BUREAU VERITAS CONSUMER PRODUCTS SERVICES INDIA PRIVATE LIMITED, NOIDA

8127706

IS 17631 (2022)

Work Chairs - Specification

Furniture

77000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
clause 4(DESIGN AND WORKMANSHIP)	-	1000	-
clause 5(DIMENSIONS)	-	1000	-
Cl-6.1 (a)(Resistance to mechanical damage)	-	3000	-
Cl-6.2 (a) (1)(For Fabric and Synthetic Leather:- Breaking load)	-	1000	-
Cl-7.3.1(Front Edge Overturning)	-	1000	-
Cl-7.3.2(Forwards Overturning)	-	1000	-
Cl-7.3.3(Forwards Overturning for Chairs with Foot Rest)	-	1000	-
Cl-7.3.4(Sideways Overturning for Chairs Without Arm Rests)	-	1000	-
Cl-6.1 (b)(Pencil hardness)	-	1000	-
Cl-6.1 (c)(Resistance to wet heat;)	-	2000	-
Cl-6.1 (d)(Resistance to dry heat;)	-	2000	-
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	3000	-
Cl-6.1 (f)(Resistance to marking by cold oils and fats;)	-	3000	-
Cl-6.1 (g)(Adhesive performance)	-	2000	-
Cl-6.2 (a) (2)(For Fabric and Synthetic Leather:- Elongation at break)	-	1000	-
Cl-6.2 (a) (3)(For Fabric and Synthetic Leather:- Tear strength)	-	600	-
Cl-6.2 (a) (4)(For Fabric and Synthetic Leather:- Colour fastness to light)	-	1500	-
Cl-6.2 (a) (5)(For Fabric and Synthetic Leather:- Colour fastness to rubbing)	-	500	-
Cl-6.2 (a) (6)(For Fabric and Synthetic Leather:- Colour fastness to perspiration)	-	500	-
Cl-6.2 (a) (7)(For Fabric and Synthetic Leather:- Colour fastness to water)	-	500	-
Cl-6.2 (a) (8)(For Fabric and Synthetic Leather:- Pilling resistance)	-	1000	-
Cl-6.2 (a) (9)(For Fabric and Synthetic Leather:- Coating adhesion strength)	-	1100	-
Cl-6.2 (a) (10)(For Fabric and Synthetic Leather:- Seam slippage)	-	1000	-
Cl-6.2 (a) (11)(For Fabric and Synthetic Leather:- Resistance to damage by flexing)	-	1500	-
Cl-6.2 (a) (12)(For Fabric and Synthetic Leather:- Abrasion resistance)	-	1000	-
Cl-6.2 (a) (13)(For Fabric and Synthetic Leather:- Bursting strength)	-	1500	-
Cl-6.2 (a) (14)(For Fabric and Synthetic Leather:- Resistance to cold)	-	2000	-
Cl-6.2 (b) (2)(For Natural Leather:- Flexing endurance)	-	1500	-
Cl-6.2 (b) (1)(For Natural Leather:- Tear strength)	-	650	-
Cl-6.2 (b) (3)(For Natural Leather: Finish adhesion)	-	1100	-
Cl-6.2 (b) (4)(For Natural Leather: Colour fastness to artificial light)	-	1500	-
Cl-6.2 (b) (5)(For Natural Leather: Colour fastness to rubbing)	-	1000	-
Cl-6.2 (b) (6)(For Natural Leather: Colour fastness to water spotting)	-	500	-
Cl-6.2 (b) (7)(For Natural Leather: Water vapour permeability)	-	1500	-
Cl-6.2 (b) (8)(For Natural Leather: Colour fastness to water)	-	500	-
Cl-7.3.5(Sideways Overturning for Chairs With Arm Rests)	-	1000	-
Cl-7.3.6(Rearwards Overturning for Chairs Without Back Rest Inclination)	-	1000	-
Cl-7.3.7(Rearwards Overturning for Chairs with Backrest Inclination)	-	1000	-
Cl-7.4.1(Seat Front Edge Static Load Test)	-	2000	-
Cl-7.4.2(Combined Seat and Back Static Load Test)	-	2000	-
Cl-7.4.3(Arm Rest Downward Static Load Test — Central)	-	2000	-
Cl-7.4.4(Arm Rest Downward Static Load Test — Front)	-	2000	-
Cl-7.4.5(Arm Rest Sideways Static Load Test)	-	2000	-
Cl-7.4.6(Foot Rest Static Load Test)	-	2000	-
Cl-7.5.1(Seat and Back Durability)	-	18000	-
Cl-7.5.2(Arm Rest Durability)	-	8000	-
Cl-7.5.3(Swivel Test)	-	10000	-
Cl-7.5.4(Foot-rest Durability)	-	8000	-
Cl-7.5.5(Castor and Chair-Base Durability)	-	10000	-

31 Dec, 2026

-
Included w.e.f. 11.09.2025

3277

Hi Physix Laboratory India Private Limited, Pune

7126926

IS 18112 (2025)

DIGITAL TELEVISION RECEIVER FOR SATELLITE BROADCAST TRANSMISSION SPECIFICATION (First Revision)

428000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.4, Table-2, ii)(RF characteristics to be supported by the DTV receiver)	-	0	-
Clause 4.3(Specifications)	-	50000	Separately covered as per IS 616
Clause 4.5(Safety Requirements)	-	0	-
Clause 4.6(Electromagnetic Compatibility (EMC) Requirements)	-	140000	-
Clause 5(Marking)	-	2000	-
Clause 6(Operating Life Test)	-	10000	-
Clause 4.1, Table-1, i) a)(Hardware specification)	-	3000	-
Clause 4.1, Table-1, i) b)(Decompression and decoding of SDTV video)	-	5000	-
Clause 4.1, Table-1, i) c)(Decompression and decoding of HDTV video)	-	5000	-
Clause 4.1, Table-1, i) d)(Decompression and decoding of audio)	-	5000	-
Clause 4.1, Table-1, i) e)(Active Format descriptors)	-	5000	-
Clause 4.1, Table-1, i) f)(Captioning and Sub-titling)	-	5000	-
Clause 4.1, Table-1, i) g)(Teletext)	-	5000	-
Clause 4.1, Table-1, i) h)(Multi-language support)	-	3000	-
Clause 4.1, Table-1, i) j)(DTV receiver mixed Audio Description)	-	3000	-
Clause 4.1, Table-1, i) k)(Broadcast mixed audio description)	-	3000	-
Clause 4.1, Table-1, i) m)(Service demultiplexing)	-	3000	-
Clause 4.1, Table-1, i) n)(Data services)	-	3000	-
Clause 4.1, Table-1, i) p)(OSD)	-	5000	-
Clause 4.1, Table-1, i) q)(DTV character set)	-	5000	-
Clause 4.1, Table-1, i) r)(Electronic Service Guide (ESG) ‘Now/Next’)	-	5000	-
Clause 4.1, Table-1, i) s)(Time)	-	5000	-
Clause 4.1, Table-1, i) t)(Digital TV output)	-	5000	-
Clause 4.4, Table-2, i) b)(Frequency)	-	5000	-
Clause 4.4, Table-2, i) a)(Input voltage range)	-	5000	-
Clause 4.1,Table-1, ii) a)(Demodulation and FEC decoding)	-	5000	-
Clause 4.1, Table-1, ii) b)(DTV Receiver Installation)	-	5000	-
Clause 4.1, Table-1, ii) c)(Network evolution)	-	5000	-
Clause 4.4, Table-2, iii) c)(RF input impedance)	-	0	-
Clause 4.1, Table-1, ii) d)(Services available)	-	5000	-
Clause 4.1, Table-1, ii) e)(Selection via Service List)	-	5000	-
Clause 4.1, Table-1, ii) f)(Selection via Numeric Entry)	-	5000	-
Clause 4.1, Table-1, ii) g)(Favourite Channel list)	-	5000	-
Clause 4.1, Table-1, ii) h)(Hidden Services)	-	5000	-
Clause 4.4, Table-2, iii) b)(Input frequency range)	-	5000	-
Clause 4.1, Table-1, ii) j)(Logical Channel Number for Satellite services)	-	5000	-
Clause 4.1, Table-1, ii) k)(RF input signal)	-	10000	-
Clause 4.1, Table-1, ii) m)(LNB supply current)	-	5000	-
Clause 4.1, Table-1, ii) n)(LNB supply voltage)	-	5000	-
Clause 4.1, Table-1, ii) p)(LNB Control)	-	5000	-
Clause 4.1, Table-1, ii) q)(Modulation/Demodulation parameters for DVB-S & DVB-S2 standard)	-	0	-
Clause 4.4, Table-2, iii) a)(Input level per carrier)	-	15000	-
Clause 4.4, Table-2, iv) c)(RF input impedance)	-	0	-
Clause 4.4, Table-2, iv) b)(Input frequency range)	-	5000	-
Clause 4.4, Table-2, iv) a)(Input level per carrier)	-	15000	-
Clause 4.4, Table-2, v)(Symbol rate)	-	5000	-
Clause 4.4, Table-2, vi)(RF input return loss)	-	0	-
Clause 4.4, Table-2, vii)(DisEqC)	-	5000	-
Clause 4.4, Table-2, viii)(Operating ambient temperature range)	-	0	-
Clause 4.4, Table-2, ix)(Operating humidity range)	-	0	-
Clause 4.1, Table-1, iii) a)(Interfaces, Connectors)	-	5000	-
Clause 4.1, Table-1, iv)(Automatic software upgrade mechanism)	-	5000	-
Clause 4.1, Table-1, v) a)(Remote Control)	-	5000	-
Clause 4.1, Table-1, v) b)(Easy to use and simple documentation)	-	5000	-
Clause 3.1, Table-1, v) c)(Support package)	-	3000	-

20 Jun, 2028

-
Included w.e.f. 13.11.2025

3278

ADS LABTECH, GHAZIABAD

8178326

IS 4985 (2021)

UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision

UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1(Colour)	-	200	.
10.1(Surface Finish)	-	200	.
7.2.1.1 Table3(Angle of taper (Note-1))	-	300	.
10.7(Sulphated Ash Content)	-	800	.
5(CLASSIFICATION OF PIPES)	-	400	.
Cl-7.1(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6))	-	500	.
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	500	.
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	500	.
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation)	-	500	.
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	500	.
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	500	.
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	500	.
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	500	.
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	500	.
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	500	.
Cl- 7.2(Socket length (Take 4 reading & minimum will be reported))	-	500	.
7.2.1(DIMENSIONS-Socket)	-	500	.
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	500	.
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	500	.
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-	500	.
7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-	500	.
7.2.1.2-Table 4(DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter)	-	500	.
8(SEALING RINGS)	-	500	.
9.1(PIPE ENDS)	-	500	.
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	500	.
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	500	.
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	500	.
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	500	.
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	500	.
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	500	.
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	4000	.
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	4000	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	4000	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	4000	-
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	4000	.
11.2(Resistance to External Blows at 0°C)	-	1000	.
10.3(Effect on Water Test)	-	4000	.
Cl-10.3 (i)(Effect on Lead (first extraction))	-	4000	.
Cl-10.3 (ii)(Effect on Lead (third extraction))	-	4000	.
7.1.3(mean outside diameter, outside diameter at any point, and wall thickness of plumbing pipes)	-	500	.
7.1.4(Length)	-	500	.
7.2.1.2b(Maximum inner diameter of groove)	-	500	.
13.1(Marking)	-	200	.
cL-13.1.1(Marking)	-	200	.
Cl-13.1.2(Marking)	-	200	.
6.1.2(PVC Resin)	-	2000	.
6.1.1(VCM Content)	-	2000	.
Cl-10.3 (iii)(Effect on Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	4000	.
Cl-10.3 (iv)(Effect on Cadmium)	-	4000	.
Cl-10.3 (v)(Effect on Mercury)	-	4000	.
Cl-10.3 (vi)(Other toxic substances such as ‘di-n-octyl-tin- mass) s-s bis iso-octyl mercapto acetate’ and ‘butyl stearate)	-	4000	.
10.1(Colour)	-	500	.
10.1(Surface Finish)	-	500	.
7.2.1.1 Table3(Angle of taper (Note-1))	-	500	.
10.7(Sulphated Ash Content)	-	500	.
5(CLASSIFICATION OF PIPES)	-	500	.
Cl-7.1(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6))	-	500	.
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	500	.
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	500	.
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation)	-	500	.
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	500	.
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	500	.
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	500	.
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	500	.
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	500	.
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	500	.
Cl- 7.2(Socket length (Take 4 reading & minimum will be reported))	-	500	.
7.2.1(DIMENSIONS-Socket)	-	500	.
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	500	.
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	500	.
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-	500	.
7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-	500	.
7.2.1.2-Table 4(DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter)	-	500	.
8(SEALING RINGS)	-	500	.
9.1(PIPE ENDS)	-	500	.
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	500	.
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	500	.
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	500	.
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	500	.
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	500	.
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	500	.
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	500	.
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	500	.
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	500	.
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	500	.
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	500	.
11.2(Resistance to External Blows at 0°C)	-	500	.
10.3(Effect on Water Test)	-	500	..
Cl-10.3 (i)(Effect on Lead (first extraction))	-	500	.
Cl-10.3 (ii)(Effect on Lead (third extraction))	-	500	.
7.1.3(mean outside diameter, outside diameter at any point, and wall thickness of plumbing pipes)	-	500	.
7.1.4(Length)	-	500	.
7.2.1.2b(Maximum inner diameter of groove)	-	500	.
13.1(Marking)	-	500	.
cL-13.1.1(Marking)	-	500	.
Cl-13.1.2(Marking)	-	500	.
6.1.2(PVC Resin)	-	500	.
6.1.1(VCM Content)	-	500	.
Cl-10.3 (iii)(Effect on Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	500	.
Cl-10.3 (iv)(Effect on Cadmium)	-	500	.
Cl-10.3 (v)(Effect on Mercury)	-	500	.
Cl-10.3 (vi)(Other toxic substances such as ‘di-n-octyl-tin- mass) s-s bis iso-octyl mercapto acetate’ and ‘butyl stearate)	-	500	.

15 May, 2027

-
-

3279

AJEO TESTING LABS PVT LTD, GHAZIABAD

8178606

IS 4923 (2017)

Hollow steel sections for structural use - Specification (Third Revision)

ALL GRADES

7200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.7.1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl.7.1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl.7.1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl.7.1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl.7.1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl.7.1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.7.1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl.7.1(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.7.1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.7.1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.7.1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl.7.1(Carbon Equivalent-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Depth))	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Width))	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Thickness))	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Weigth))	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Area of Section))	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia))	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about X-X))	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about Y-Y))	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration))	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration about X-X))	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Radius of Gyration about Y-Y))	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Elastic Modulus))	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about X-X))	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about Y-Y))	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus))	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus about X-X))	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Plastic Modulus about Y-Y))	-	0	-
Cl. 10.1, 14.1, 18.1(Straightness)	-	200	-
Cl. 10.2, Fig 1(Outside dimension (B))	-	200	-
Cl. 10.2, Fig 1(Outside dimension (H))	-	200	-
Cl. 10.2, Fig 1(Outside dimension (T))	-	200	-
Cl. 10.4, Fig 2(Concavity, X1)	-	200	-
Cl. 10.5, Fig 3(Squareness of side)	-	200	-
Cl. 10.6, Fig 4(External Corner Radius)	-	200	-
Cl. 10.7, Fig 5(Total twist, V)	-	200	-
Cl. 15.2, Table 3(Tensile Strength- IS 1608)	-	500	-
Cl. 15.2, Table 3(Yield Strength- IS 1608)	-	500	-
Cl. 15.2, Table 3(Elongation- IS 1608)	-	500	-
Cl. 14.1(Exact Length)	-	0	-
Cl. 14.1(Random Length)	-	0	-
Cl. 14.1(Weight on individual length)	-	500	-
Cl. 14.1(Weight on lots of 10 tonnes min)	-	0	-
Cl. 18, Note 2(Internal Fin Height (Only for Cold Formed))	-	500	-
7(Micro Alloying elements(Nb+V+Ti))	-	0	-
7(Carbon equivalent as CE)	-	0	-
10.4(Concavity/Convexity-SOP MT-23)	-	200	-
10.5(Squareness of corner/Sides-SOP MT-23)	-	200	-
10.6("External corner Radius/ Radii of corners-outside - SOP MT-23")	-	200	-
11(Oiling & Painting - IS 4923)	-	200	-
18.1(Height of the internal weld fin - IS 4923)	-	500	-
10.3(Thickness - IS 4923)	-	200	-
13(Marking)	-	0	-
Cl-19(Mechanical Tests)	-	0	-
Cl. 10.4, Fig 2(Convexity, X2)	-	200	-

-
included w.e.f 05.01.2026

3280

ALPHA TEST HOUSE SERVICES LLP (Unit-1), MOHALI

9184906

IS 208 (2020)

Door Handles - Specification ( Sixth Revision )

all

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10(PACKING)	-	7500	-
9.1(BIS Certification Marking)	-	7500	-
9(MARKING)	-	7500	-
6.2(Tolerance)	-	7500	-
6.1 Table2A & 2B and Fig 1,2,3,4(DIMENSIONS - Size 1. No. in each Lug 2. No. in a plate when a continious plate is used 3. Size Designation of Counter-sunk Head Wood Screws (as per IS 6760: 1972))	-	7500	-
6.1 Table2A & 2B and Fig 1,2,3,4(DIMENSIONS - Size (A,B,C,D,E,F,G,H,I))	-	7500	-
5.1(MANUFACTURE- General)	-	7500	-
3(TYPES-Doors handle shall be of the following types according to the materials used:)	-	7500	-
4.2 -Table 1- viii (Ref. Cl 4.1, Table 1 of IS 742 : 1981)(Chemical composition - Zinc- IS 2600:1964)	-	7500	-
4.2 -Table 1- viii (Ref. Cl 4.1, Table 1 of IS 742 : 1981)(Chemical composition - Impurities-Nickel- IS 2600:1964)	-	7500	-
4.2 -Table 1- viii (Ref. Cl 4.1, Table 1 of IS 742 : 1981)(Chemical composition - Impurities-Thallium and Indium- IS 2600:1964)	-	7500	-
4.2 -Table 1- viii (Ref. Cl 4.1, Table 1 of IS 742 : 1981)(Chemical composition - Impurities-Tin- IS 2600:1964)	-	7500	-
4.2 -Table 1- viii (Ref. Cl 4.1, Table 1 of IS 742 : 1981)(Chemical composition - Impurities-Cadmium- IS 2600:1964)	-	7500	-
Cl.5.1(General)	-	7500	-
Cl.6(Dimension)	-	7500	-
Cl.7(Finish)	-	7500	-
Cl.8.2(Cossosion Test)	-	7500	-
Cl.8.3(Quench Test)	-	7500	-
Cl.9(Sampling and criterion for conformity)	-	7500	-
Cl.10(Marking)	-	7500	-
Cl.11(Packing)	-	7500	-
Cl.8.3 (Amendment 1)(Anodizing Test)	-	7500	-

25 Apr, 2028

-
Included w.e.f.22.09.2025

3281

ALPHA TEST HOUSE SERVICES LLP (Unit-1), MOHALI

9184906

IS 4992 (2024)

Door Handles for Mortice Locks â Specification (Second Revision)

All

19500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6.1(Fastening Elements and Spindle)	-	19500	-
Cl-6.2, Table-2 (i) a(Axial strength percent)	-	19500	-
Cl-6.2, Table-2 (i) b(Pre-load)	-	19500	-
Cl-6.2, Table-2 (i) c(Permanent deformation)	-	19500	-
Cl-6.3(Safety Requirements)	-	19500	-
Cl-6.4, Table-3 (1) a(Number of cycles)	-	19500	-
Cl-6.4, Table-3 (1) b(Force “P”)	-	19500	-
Cl-6.5(Corrosion Resistance)	-	19500	-
Cl-8(Marking)	-	19500	-

25 Apr, 2028

-
Included w.e.f.28.08.2025 Exclusion Cl-6.6 (Fire Resistance Test)

3282

National Research and Technology Consortium (NRTC), Parwanoo

9136024

IS 4250 (2025)

Electric Food-Mixers (Liquidizers and Grinders) and Centrifugal Juicers ï¿½ Specification ( Second Revision )

25000 View breakup
-

Clause No.	Exclusion	Remark
Cl-4(General Requirements)	-	included
Cl-5(General Conditions for the tests)	-	included
Cl-6(Classification)	-	included
Cl-7(Marking)	-	included
Cl-8(Safety Requirements)	-	included
Cl-9(Endurance fpr motor and base assembly)	-	included
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	included
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	included
Cl-10.4(Idli Batter)	-	included
Cl-10.5(Operational Tests for Juicers)	-	included
Cl-11(Temperature Withstand Test for Bowl)	-	included
Cl-12.1(Test for Switches)	-	included
Cl-13(Strength of Assembly)	-	included
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	included
Cl-14.2, Table-2 (ii)(Power input and current)	-	included
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	included
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	included
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	included
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	included
Cl-4(General Requirements)	-	included
Cl-5(General Conditions for the tests)	-	included
Cl-6(Classification)	-	included
Cl-7(Marking)	-	included
Cl-8(Safety Requirements)	-	included
Cl-9(Endurance fpr motor and base assembly)	-	included
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	included
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	included
Cl-10.4(Idli Batter)	-	included
Cl-10.5(Operational Tests for Juicers)	-	included
Cl-11(Temperature Withstand Test for Bowl)	-	included
Cl-12.1(Test for Switches)	-	included
Cl-13(Strength of Assembly)	-	included
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	included
Cl-14.2, Table-2 (ii)(Power input and current)	-	included
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	included
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	included
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	included
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	included
Cl-4(General Requirements)	-	included
Cl-5(General Conditions for the tests)	-	included
Cl-6(Classification)	-	included
Cl-7(Marking)	-	included
Cl-8(Safety Requirements)	-	included
Cl-9(Endurance fpr motor and base assembly)	-	included
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	included
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	included
Cl-10.4(Idli Batter)	-	included
Cl-10.5(Operational Tests for Juicers)	-	included
Cl-11(Temperature Withstand Test for Bowl)	-	included
Cl-12.1(Test for Switches)	-	included
Cl-13(Strength of Assembly)	-	included
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	included
Cl-14.2, Table-2 (ii)(Power input and current)	-	included
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	included
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	included
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	included
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	included

10 Apr, 2026

-
Included w.e.f.10.09.2025 Exclusion Cl 19.11.4.1 To Cl 19.11.4.7 EMI/EMC

3283

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 7056 (2024)

Textiles ï¿½ Cotton Towelling and Towels ï¿½ Specification (Second revison)

All

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3.1, Table-1(Count of Yarn, Ne)	-	830	-
Cl-3.1, Table-1(Threads per dm, Min)	-	830	-
Cl-3.1, Table-1(Mass, Min)	-	830	-
Cl-3.1, Table-1(Terry Ratio, Min)	-	830	-
Cl-3.1, Table-2(Count of Yarn, Ne)	-	830	-
Cl-3.1, Table-2(Threads per dm Min)	-	830	-
Cl-3.1, Table-2(Mass, Min)	-	830	-
Cl-3.2.1, Table-3 (i)(Identification of material)	-	830	-
Cl-3.2.1, Table-3 (ii)(Breaking load on 5.0 cm × 20 cm strips Min)	-	830	-
Cl-3.2.1, Table-3 (iii)(Scouring loss, percent, Max)	-	830	-
Cl-3.2.1, Table-3 (iv)(Dimensional change, percent, Max)	-	830	-
Cl-3.2.1, Table-3 (v)(pH value)	-	830	-
Cl-3.2.1, Table-3 (vi)(Wettability, Max)	-	830	-
Cl-3.2.1, Table-3 (vii), a(Minimum Colour Fastness Rating to Light)	-	830	-
Cl-3.2.1, Table-3 (vii), b(Minimum Colour Fastness Rating to Washing)	-	830	-
Cl-3.2.1, Table-3 (vii), c(Minimum Colour Fastness Rating to Hypochlorite)	-	830	-
Cl-3.2.2(Whiteness index)	-	830	-
Cl-3.3(Freedom from Defects)	-	830	-
Cl-3.4, Table-4(Minimum Dimensions-Width)	-	830	-
Cl-3.4, Table-4(Minimum Dimensions-Length)	-	830	-
Cl-3.5, Table-4(Maximum depth of plain heading)	-	830	-
Cl-3.6 (a)(Cotton sewing thread)	-	830	-
Cl-3.6 (b)(Polyester sewing thread)	-	830	-
Cl-3.7(Transverse Ends or End Hems)	-	830	-
Cl-3.8(Side Edges)	-	830	-
Cl-3.9(Stitching)	-	830	-
Cl-5(Marking)	-	830	-
Cl-3.1, Table-1(Count of Yarn, Ne- Warp, Ground, Pile Weft)	-	830	-
Cl-3.1, Table-1(Threads per dm, Min- Warp, Ground, Pile Weft)	-	830	-
Cl-3.1, Table-1(Mass, Min g/m2)	-	830	-
Cl-3.1, Table-1(Terry Ratio, Min)	-	830	-
Cl-3.1, Table-2(Count of Yarn, Ne- Warp)	-	830	-
Cl-3.1, Table-2(Count of Yarn, Ne- Weft)	-	830	-
Cl-3.1, Table-2(Threads per dm Min- Ends)	-	830	-
Cl-3.1, Table-2(Threads per dm Min- Picks)	-	830	-
Cl-3.1, Table-2(Mass, Min g/m2)	-	830	-
Cl-3.2.1, Table-3 (i)(Identification of material)	-	830	-
Cl-3.2.1, Table-3 (ii)("Breaking load on 5.0 cm × 20 cm strips a) Warpway")	-	830	-
Cl-3.2.1, Table-3 (ii)("Breaking load on 5.0 cm × 20 cm strips b) Weftway")	-	830	-
Cl-3.2.1, Table-3 (iii)(Scouring loss, percent, Max)	-	830	-
Cl-3.2.1, Table-3 (iv)(Dimensional change, percent, Max)	-	830	-
Cl-3.2.1, Table-3 (v)(pH value)	-	830	-
Cl-3.2.1, Table-3 (vi)(Wettability, Max)	-	830	-
Cl-3.2.1, Table-3 (vii)(Minimum colour fastness rating to: a) Light)	-	830	-
Cl-3.2.1, Table-3 (vii)(Minimum colour fastness rating to: b) Washing)	-	830	-
Cl-3.2.1, Table-3 (vii)(Minimum colour fastness rating to: c) Hypochlorite)	-	830	-
Cl-3.3(Freedom from Defects)	-	830	-
Cl-3.4, 3.5, Table-4(Minimum Dimensions- Width)	-	830	-
Cl-3.4, 3.5, Table-4(Minimum Dimensions- Length)	-	830	-
Cl-3.4, 3.5, Table-4(Maximum Heading)	-	830	-
Cl-3.7(Transverse Ends or End Hems)	-	830	-
Cl-3.8(Side Edges)	-	830	-
Cl-3.9(Stitching)	-	830	-
Cl-5(Marking)	-	830	-
Cl-3.1, Table-1(Count of Yarn, Ne)	-	830	-
Cl-3.1, Table-1(Threads per dm, Min)	-	830	-
Cl-3.1, Table-1(Mass, Min)	-	830	-
Cl-3.1, Table-1(Terry Ratio, Min)	-	830	-
Cl-3.1, Table-2(Count of Yarn, Ne)	-	830	-
Cl-3.1, Table-2(Threads per dm Min)	-	830	-
Cl-3.1, Table-2(Mass, Min)	-	830	-
Cl-3.2.1, Table-3 (i)(Identification of material)	-	830	-
Cl-3.2.1, Table-3 (ii)(Breaking load on 5.0 cm × 20 cm strips Min)	-	830	-
Cl-3.2.1, Table-3 (iii)(Scouring loss, percent, Max)	-	830	-
Cl-3.2.1, Table-3 (iv)(Dimensional change, percent, Max)	-	830	-
Cl-3.2.1, Table-3 (v)(pH value)	-	830	-
Cl-3.2.1, Table-3 (vi)(Wettability, Max)	-	830	-
Cl-3.2.1, Table-3 (vii), a(Minimum Colour Fastness Rating to Light)	-	830	-
Cl-3.2.1, Table-3 (vii), b(Minimum Colour Fastness Rating to Washing)	-	830	-
Cl-3.2.1, Table-3 (vii), c(Minimum Colour Fastness Rating to Hypochlorite)	-	830	-
Cl-3.2.2(Whiteness index)	-	830	-
Cl-3.3(Freedom from Defects)	-	830	-
Cl-3.4, Table-4(Minimum Dimensions-Width)	-	830	-
Cl-3.4, Table-4(Minimum Dimensions-Length)	-	830	-
Cl-3.5, Table-4(Maximum depth of plain heading)	-	830	-
Cl-3.6 (a)(Cotton sewing thread)	-	830	-
Cl-3.6 (b)(Polyester sewing thread)	-	830	-
Cl-3.7(Transverse Ends or End Hems)	-	830	-
Cl-3.8(Side Edges)	-	830	-
Cl-3.9(Stitching)	-	830	-
Cl-5(Marking)	-	830	-
Cl-3.1, Table-1(Count of Yarn, Ne- Warp, Ground, Pile Weft)	-	830	-
Cl-3.1, Table-1(Threads per dm, Min- Warp, Ground, Pile Weft)	-	830	-
Cl-3.1, Table-1(Mass, Min g/m2)	-	830	-
Cl-3.1, Table-1(Terry Ratio, Min)	-	830	-
Cl-3.1, Table-2(Count of Yarn, Ne- Warp)	-	830	-
Cl-3.1, Table-2(Count of Yarn, Ne- Weft)	-	830	-
Cl-3.1, Table-2(Threads per dm Min- Ends)	-	830	-
Cl-3.1, Table-2(Threads per dm Min- Picks)	-	830	-
Cl-3.1, Table-2(Mass, Min g/m2)	-	830	-
Cl-3.2.1, Table-3 (i)(Identification of material)	-	830	-
Cl-3.2.1, Table-3 (ii)("Breaking load on 5.0 cm × 20 cm strips a) Warpway")	-	830	-
Cl-3.2.1, Table-3 (ii)("Breaking load on 5.0 cm × 20 cm strips b) Weftway")	-	830	-
Cl-3.2.1, Table-3 (iii)(Scouring loss, percent, Max)	-	830	-
Cl-3.2.1, Table-3 (iv)(Dimensional change, percent, Max)	-	830	-
Cl-3.2.1, Table-3 (v)(pH value)	-	830	-
Cl-3.2.1, Table-3 (vi)(Wettability, Max)	-	830	-
Cl-3.2.1, Table-3 (vii)(Minimum colour fastness rating to: a) Light)	-	830	-
Cl-3.2.1, Table-3 (vii)(Minimum colour fastness rating to: b) Washing)	-	830	-
Cl-3.2.1, Table-3 (vii)(Minimum colour fastness rating to: c) Hypochlorite)	-	830	-
Cl-3.3(Freedom from Defects)	-	830	-
Cl-3.4, 3.5, Table-4(Minimum Dimensions- Width)	-	830	-
Cl-3.4, 3.5, Table-4(Minimum Dimensions- Length)	-	830	-
Cl-3.4, 3.5, Table-4(Maximum Heading)	-	830	-
Cl-3.7(Transverse Ends or End Hems)	-	830	-
Cl-3.8(Side Edges)	-	830	-
Cl-3.9(Stitching)	-	830	-
Cl-5(Marking)	-	830	-
Cl-3.1, Table-1(Count of Yarn, Ne)	-	830	-
Cl-3.1, Table-1(Threads per dm, Min)	-	830	-
Cl-3.1, Table-1(Mass, Min)	-	830	-
Cl-3.1, Table-1(Terry Ratio, Min)	-	830	-
Cl-3.1, Table-2(Count of Yarn, Ne)	-	830	-
Cl-3.1, Table-2(Threads per dm Min)	-	830	-
Cl-3.1, Table-2(Mass, Min)	-	830	-
Cl-3.2.1, Table-3 (i)(Identification of material)	-	830	-
Cl-3.2.1, Table-3 (ii)(Breaking load on 5.0 cm × 20 cm strips Min)	-	830	-
Cl-3.2.1, Table-3 (iii)(Scouring loss, percent, Max)	-	830	-
Cl-3.2.1, Table-3 (iv)(Dimensional change, percent, Max)	-	830	-
Cl-3.2.1, Table-3 (v)(pH value)	-	830	-
Cl-3.2.1, Table-3 (vi)(Wettability, Max)	-	830	-
Cl-3.2.1, Table-3 (vii), a(Minimum Colour Fastness Rating to Light)	-	830	-
Cl-3.2.1, Table-3 (vii), b(Minimum Colour Fastness Rating to Washing)	-	830	-
Cl-3.2.1, Table-3 (vii), c(Minimum Colour Fastness Rating to Hypochlorite)	-	830	-
Cl-3.2.2(Whiteness index)	-	830	-
Cl-3.3(Freedom from Defects)	-	830	-
Cl-3.4, Table-4(Minimum Dimensions-Width)	-	830	-
Cl-3.4, Table-4(Minimum Dimensions-Length)	-	830	-
Cl-3.5, Table-4(Maximum depth of plain heading)	-	830	-
Cl-3.6 (a)(Cotton sewing thread)	-	830	-
Cl-3.6 (b)(Polyester sewing thread)	-	830	-
Cl-3.7(Transverse Ends or End Hems)	-	830	-
Cl-3.8(Side Edges)	-	830	-
Cl-3.9(Stitching)	-	830	-
Cl-5(Marking)	-	830	-
Cl-3.1, Table-1(Count of Yarn, Ne- Warp, Ground, Pile Weft)	-	830	-
Cl-3.1, Table-1(Threads per dm, Min- Warp, Ground, Pile Weft)	-	830	-
Cl-3.1, Table-1(Mass, Min g/m2)	-	830	-
Cl-3.1, Table-1(Terry Ratio, Min)	-	830	-
Cl-3.1, Table-2(Count of Yarn, Ne- Warp)	-	830	-
Cl-3.1, Table-2(Count of Yarn, Ne- Weft)	-	830	-
Cl-3.1, Table-2(Threads per dm Min- Ends)	-	830	-
Cl-3.1, Table-2(Threads per dm Min- Picks)	-	830	-
Cl-3.1, Table-2(Mass, Min g/m2)	-	830	-
Cl-3.2.1, Table-3 (i)(Identification of material)	-	830	-
Cl-3.2.1, Table-3 (ii)("Breaking load on 5.0 cm × 20 cm strips a) Warpway")	-	830	-
Cl-3.2.1, Table-3 (ii)("Breaking load on 5.0 cm × 20 cm strips b) Weftway")	-	830	-
Cl-3.2.1, Table-3 (iii)(Scouring loss, percent, Max)	-	830	-
Cl-3.2.1, Table-3 (iv)(Dimensional change, percent, Max)	-	830	-
Cl-3.2.1, Table-3 (v)(pH value)	-	830	-
Cl-3.2.1, Table-3 (vi)(Wettability, Max)	-	830	-
Cl-3.2.1, Table-3 (vii)(Minimum colour fastness rating to: a) Light)	-	830	-
Cl-3.2.1, Table-3 (vii)(Minimum colour fastness rating to: b) Washing)	-	830	-
Cl-3.2.1, Table-3 (vii)(Minimum colour fastness rating to: c) Hypochlorite)	-	830	-
Cl-3.3(Freedom from Defects)	-	830	-
Cl-3.4, 3.5, Table-4(Minimum Dimensions- Width)	-	830	-
Cl-3.4, 3.5, Table-4(Minimum Dimensions- Length)	-	830	-
Cl-3.4, 3.5, Table-4(Maximum Heading)	-	830	-
Cl-3.7(Transverse Ends or End Hems)	-	830	-
Cl-3.8(Side Edges)	-	830	-
Cl-3.9(Stitching)	-	830	-
Cl-5(Marking)	-	830	-

08 May, 2028

-
Included w.e.f 04.09.2025

3284

VERTEX TESTING LABORATORY PRIVATE LIMITED, GHAZIABAD

8185906

IS 2202 : Part 1 (2023)

WOODEN FLUSH DOOR SHUTTERS SOLID CORE TYPE SPECIFICATION PART 1 PLYWOOD FACE PANELS Seventh Revision

MR,BWP/Decorative, Non Decorative/All Size/8DS20 to 12DT21

17000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.1(Workmanship & Finish)	-	200	-
9.2(Workmanship & Finish)	-	0	-
9.3(Workmanship & Finish)	-	0	-
11.1(Dimensions - Height)	-	200	-
11.1(Dimensions - Width)	-	200	-
11.1(Dimensions - Thickness)	-	200	-
11.1(Dimensions - Variation in thickness)	-	200	-
11.1(Dimensions - Squareness)	-	200	-
11.12(End immersion test)	-	300	-
11.13(Knife Test)	-	300	-
11.14(Glue Adhesion Test)	-	200	-
4(GRADE)	-	100	-
4(TYPE)	-	100	-
5(SIZES)	-	100	-
7.1.1(CONSTRUCTION-Blockboard Core)	-	100	-
7.1.1(CONSTRUCTION-Blockboard Core)	-	0	-
7.1.2(CONSTRUCTION-Blockboard Core)	-	0	-
7.3.2(CONSTRUCTION-Stiles and Rails)	-	100	-
7.3.2(a)(CONSTRUCTION-Stiles and Rails-Joints)	-	0	-
7.3.2(b)(CONSTRUCTION-Stiles and Rails-Joints)	-	0	-
7.3.2(c)(CONSTRUCTION-Stiles and Rails-Joints)	-	0	-
7.3.3(CONSTRUCTION-Stiles and Rails)	-	0	-
9.1(WORKMANSHIP AND FINISH)	-	0	-
9.2(WORKMANSHIP AND FINISH)	-	0	-
9.3(WORKMANSHIP AND FINISH)	-	0	-
11.1(Dimensions and Squareness Test)	-	100	-
11.1(Dimensions and Squareness Test)	-	100	-
11.1(Dimensions and Squareness Test)	-	100	-
11.1(Dimensions and Squareness Test)	-	100	-
11.1(Dimensions and Squareness Test)	-	100	-
11.2(General Flatness Test)	-	100	-
11.2(General Flatness Test)	-	0	-
11.2(General Flatness Test)	-	0	-
11.3(Local Planeness Test)	-	100	-
11.4(Impact Indentation Test)	-	200	-
11.4(Impact Indentation Test)	-	0	-
11.5(Flexure Test)	-	200	-
11.5(Flexure Test)	-	0	-
11.6(Edge Loading Test)	-	300	-
11.6(Edge Loading Test)	-	0	-
11.6(Edge Loading Test)	-	0	-
11.6(Edge Loading Test)	-	0	-
11.7.1(Shock Resistance Test)	-	300	-
11.7.2(Shock Resistance Test)	-	0	-
11.8(Buckling Test)	-	300	-
11.8(Buckling Test)	-	0	-
11.8(Buckling Test)	-	0	-
11.9.2(Slamming Test)	-	300	-
11.9.3(Slamming Test)	-	0	-
11.10(Misuse Test)	-	300	-
11.11(Varying Humidity Test)	-	500	-
11.11(Varying Humidity Test)	-	0	-
11.12(End Immersion Test)	-	300	-
11.13(Knife Test)	-	300	-
11.14(Glue Adhesion Test)	-	500	-
11.15(Screw Withdrawal Resistance Test)	-	800	-
11.15(Screw Withdrawal Resistance Test)	-	0	-
Clause 4.2(grades specified)	-	300	-
Clause 5(SIZES)	-	200	-
Clause 6.1.1(species of timber)	-	200	-
Clause 6.1.2(list of species)	-	200	-
Clause 6.1.3(moisture content)	-	500	-
Clause 6.2.1(Plywood)	-	300	-
Clause 6.2.2(Decorative plywood)	-	500	-
Clause 6.3(Cross-Bands)	-	300	-
Clause 6.4.1(Commercial Face Veneers)	-	300	-
Clause 6.4.2(Decorative Face Veneers)	-	200	-
Clause 6.6.1(Adhesives)	-	500	-
Clause 6.7(Particle Board)	-	500	-
Clause 6.8(Medium density fibre board)	-	500	-
Clause 6.9(Alternative Materials)	-	200	-
Clause 7.1(Blockboard Core)	-	200	-
Clause 7.2(Particle Board or Medium Density Fibre)	-	200	-
Clause 7.3(Stiles and Rails)	-	200	-
Clause 7.4(Levelling)	-	200	-
Clause 7.5(Face Panel)	-	200	-
Clause 7.6(Lipping)	-	200	-
Clause 7.7(Rebating)	-	200	-
Clause 7.8(Opening for Glazing)	-	200	-
Clause 7.9(Venetian)	-	200	-
Clause 8.1(Locks)	-	200	-
Clause 9(WORKMANSHIP AND FINISH)	-	200	-
Clause 10.1(Classification of Tests)	-	200	-
Clause 11.1(Dimensions and Squareness Test)	-	200	-
Clause 11.2(General Flatness Test)	-	200	-
Clause 11.3(Local Planeness Test)	-	200	-
Clause 11.4(Impact Indentation Test)	-	200	-
Clause 11.5(Flexure Test)	-	200	-
Clause 11.6(Edge Loading Test)	-	200	-
Clause 11.7(Shock Resistance Test)	-	200	-
Clause 11.8(Buckling Resistance Test)	-	200	-
Clause 11.9(Slamming Test)	-	200	-
Clause 11.10(Misuse Test)	-	200	-
Clause 11.11(Varying Humidity Test)	-	100	-
Clause 11.12(End Immersion Test)	-	100	-
Clause 11.13(Knife Test)	-	100	-
Clause 11.14(Glue Adhesion Test)	-	100	-
Clause 11.15(Screw Withdrawal Resistance Test)	-	100	-
Clause 12(SAMPLING AND CRITERIA FOR CONFORMITY)	-	100	-
Clause 13(ADDITIONAL REQUIREMENTS FOR ECO MARK)	-	100	-
Clause 14(Marking)	-	100	-
4(Grade, Type and Construction)	-	100	-
5(Sizes and Thickness)	-	100	-
6.1(Timber)	-	100	-
6.2(Plywood for flush door shutter)	-	0	-
6.3(Cross-Bands )	-	0	-
6.4.1(Commercial Face Veneers)	-	0	-
6.4.2(Decorative face veneers)	-	0	-
6.6(Adhesives)	-	0	-
6.7(Particle Board)	-	0	-
6.8(Medium Density Fibre)	-	0	-
6.9(Alternative Materials)	-	0	-
7(Construction)	-	0	-
8.1(Locks)	-	0	-
8.2(Other Fittings)	-	0	-
9(Workmanship and Finish)	-	0	-
10(Tests)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.2(General Flatness Test)	-	0	-
11.3(Local Planeness Test)	-	0	-
11.4(Impact Indentation Test)	-	0	-
11.5(Flexure Test)	-	0	-
11.6(Edge Loading Test)	-	0	-
11.7(Shock Resistance Test)	-	0	-
11.8(Buckling Resistance Test)	-	0	-
11.9(Slamming Test)	-	0	-
11.1(Misuse Test)	-	0	-
11.11(Varying Humidity Test)	-	0	-
11.12(End Immersion Test)	-	0	-
11.13(Knife Test)	-	0	-
11.14(Glue Adhesion Test)	-	0	-
11.15(Screw Withdrawal Resistance Test)	-	0	-
14(Marking )	-	0	-
Cl-13(ADDITIONAL REQUIREMENTS FOR ECO MARK)	-	0	-

23 May, 2028

-
Included w.e.f. 04.09.2025

3285

Excel Surveyors Pvt. Ltd., Kolkata

5135906

IS 3601 (2006)

Steel tubes for mechanical and general engineering purposes - Specification (Second Revision)

Types-WT;HFS;CDS; CEW (All Grades)

6900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Material)	-	100	-
13(Mechanical Testing)	-	0	-
6.0(Workmanship)	-	100	-
4.1(Sulphur-Percentage by mass)	-	100	-
4.1(Phosphorus-Percentage by mass)	-	100	-
8.0(Straightness)	-	100	-
19.1.1, 24.1.1, 28.1.1, 33.1.1(Dimensions- Outside Dia)	-	200	-
19.1.2, 24.1.2, 28.1.2, 33.1.2(Dimensions- Thickness)	-	100	-
11.1(Surface Protection)	-	300	-
11.2(Surface Protection)	-	0	-
13.1.3(Tensile Strength)	-	500	-
13.1.1(Yield Stress)	-	0	-
13.1.2(Elongation)	-	0	-
13.2(Flattening Test)	-	350	-
13.3(Bend Test (Strip))	-	500	-
13.4(Bend Test (Whole Tube))	-	500	-
13.5(Drift Expansion Test)	-	500	-
13.6(Crush Test)	-	500	-
19.1.3(Height of Internal Fin)	-	200	-
6.0(Workmanship)	-	0	-
4.1(Sulphur-Percentage by mass)	-	0	-
4.1(Phosphorus-Percentage by mass)	-	0	-
8.0(Straightness)	-	0	-
19.1.1, 24.1.1, 28.1.1, 33.1.1(Dimensions- Outside Dia)	-	0	-
19.1.2, 24.1.2, 28.1.2, 33.1.2(Dimensions- Thickness)	-	0	-
11.1(Surface Protection)	-	0	-
11.2(Surface Protection)	-	0	-
13.1.3(Tensile Strength)	-	0	-
13.1.1(Yield Stress)	-	0	-
13.1.2(Elongation)	-	0	-
13.2(Flattening Test)	-	0	-
13.3(Bend Test (Strip))	-	0	-
13.4(Bend Test (Whole Tube))	-	0	-
13.5(Drift Expansion Test)	-	0	-
13.6(Crush Test)	-	0	-
19.1.3(Height of Internal Fin)	-	200	-
Cl. 10 Annex B Cl. 17, Cl. 19(Moment of inertia)	-	200	-
Cl. 10 Annex B Cl. 17, Cl. 19(Radius of gyration)	-	200	-
Cl. 10 Annex B Cl. 17, Cl. 19(Modulus of section)	-	300	-
Cl. 10 Annex B Cl. 17, Cl. 19(Area of cross section)	-	200	-
Cl. 19.1.3(Internal Fin Height)	-	0	-
Cl. 10 Annex B Cl. 17, Cl. 19(Mass)	-	300	-
Cl. 9(Length)	-	150	-
4.0 (a)(Carbon as C - IS:8811)	-	100	-
4.0 (b)(Manganese as Mn - IS:8811)	-	100	-
4.0 (b)(Manganese as Mn - IS:8811)	-	0	-
4.0 (c)(Micro Alloying elements (Nb+V+Ti))	-	100	-
4.0 (f)(Nitrogen content)	-	100	-
9(Length -SOP MT-23)	-	0	-
10(Outside diameter-SOP MT-23)	-	0	-
10(Thickness - SOP MT-23)	-	0	-
10(Mass of Tube-SOP MT-23)	-	0	-
10(Area of Cross Section)	-	200	-
16(Marking)	-	100	-
CL 10("1.Outer dia (04) 2.Thickness (08)")	-	150	-
CL 10(Minimum Outer dia (04))	-	150	-
CL 10(Maximum Outer dia (04))	-	0	-
Cl-10(" Minimum Thickness (08)")	-	150	-
CL 10(Maximum Thickness (08))	-	150	-
4(Material)	-	-	-
13(Mechanical Testing)	-	-	-
Cl. 10 Annex B Cl. 17, Cl. 19(Moment of inertia)	-	-	-
Cl. 10 Annex B Cl. 17, Cl. 19(Radius of gyration)	-	-	-
Cl. 10 Annex B Cl. 17, Cl. 19(Modulus of section)	-	-	-
Cl. 10 Annex B Cl. 17, Cl. 19(Area of cross section)	-	-	-
Cl. 19.1.3(Internal Fin Height)	-	-	-
Cl. 10 Annex B Cl. 17, Cl. 19(Mass)	-	-	-
Cl. 9(Length)	-	-	-
4.0 (a)(Carbon as C - IS:8811)	-	-	-
4.0 (b)(Manganese as Mn - IS:8811)	-	-	-
4.0 (b)(Manganese as Mn - IS:8811)	-	-	-
4.0 (c)(Micro Alloying elements (Nb+V+Ti))	-	-	-
4.0 (f)(Nitrogen content)	-	-	-
9(Length -SOP MT-23)	-	-	-
10(Outside diameter-SOP MT-23)	-	-	-
10(Thickness - SOP MT-23)	-	-	-
10(Mass of Tube-SOP MT-23)	-	-	-
10(Area of Cross Section)	-	-	-
16(Marking)	-	-	-
CL 10("1.Outer dia (04) 2.Thickness (08)")	-	-	-
CL 10(Minimum Outer dia (04))	-	-	-
CL 10(Maximum Outer dia (04))	-	-	-
Cl-10(" Minimum Thickness (08)")	-	-	-
CL 10(Maximum Thickness (08))	-	-	-

31 Dec, 2026

-
Included w.e.f 12.11.2025

3286

ALPHA TEST HOUSE SERVICES LLP (Unit-1), MOHALI

9184906

IS 17954 (2023)

TELESCOPIC BALL BEARING DRAWER SLIDE SPECIFICATION

All

24000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.2, Table- 2 (i)(Internal channel)	-	24000	-
Cl-4.2, Table- 2 (ii)(Outer channel)	-	24000	-
Cl-4.2, Table- 2 (iii)(Track up to 550 mm)	-	24000	-
Cl-4.2, Table- 2 (iv)(Track from 600 mm onwards)	-	24000	-
Cl-4.2, Table- 2 (v)(Ball cage)	-	24000	-
Cl-4.2, Table- 2 (vi)(Ball spacer)	-	24000	-
Cl-5(Components and Manufacture)	-	24000	-
Cl-5(Components and Manufacture)	-	24000	-
Cl-6.1(Preparatory Measures)	-	24000	-
Cl-6.2 (a)(Limiting Deviations- Force)	-	24000	-
Cl-6.2 (b)(Limiting Deviations- Speed)	-	24000	-
Cl-6.2 (c)(Limiting Deviations- Weights)	-	24000	-
Cl-6.2 (d)(Limiting Deviations- Dimension)	-	24000	-
Cl-6.3(Application of Forces)	-	24000	-
Cl-6.4(Testing Equipment)	-	24000	-
Cl-6.5(Sequence of testing)	-	24000	-
Cl-7(Vertical Load Test)	-	24000	-
Cl-8(Horizontal Load Test)	-	24000	-
Cl-9(Durability Test)	-	24000	-
Cl-10(Deflection Test)	-	24000	-
Cl-11(Slam Test)	-	24000	-
Cl-12(Finish)	-	24000	-
Cl-5.11(Ball)	-	24000	-
Cl-5.10(Rivets)	-	24000	-
4.1(size of the telescopic ball bearing slide)	-	24000	-
6.6 (amendment 1)(difference of the maximum forces for opening and closing)	-	24000	-

25 Apr, 2028

-
Included w.e.f.28.08.2025

3287

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 16208 (2015)

Textiles - High density polyethylene (HDPE)/polypropylene (PP) woven sacks for packaging 10 kg, 15 kg, 20 kg, 25 kg and 30 kg foodgrains - Specification

All

19800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(TYPES)	-	300	-
4.1(Raw Material)	-	300	-
4.2(Tapes – Width IS 6192 and IS 11197)	-	300	-
4.2(Tapes – Linear Density )	-	300	-
4.2(Construction)	-	300	-
4.3(Sacks)	-	300	-
4.3.1(Bottom Seam)	-	300	-
4.3.1( The two rows of stitches shall be separated from each other)	-	300	-
4.3.1( The outer stitch)	-	300	-
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	300	-
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	300	-
4.3.1(The number of stitches/dm)	-	300	-
4.3.2(Mouth)	-	300	-
4.4 and Table 1 i(Capacity)	-	300	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	300	-
5.2 and Table 1 ii b(Dimensions Inside Width)	-	300	-
5.2 and Table 1 iii(Ends per dm )	-	300	-
5.2 and Table 1 iv(Picks per dm )	-	300	-
5.1 and Table 1 v(Mass of sack )	-	300	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	300	-
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	300	-
5.2 and Table 1 vi(Breaking strength of bottom seam )	-	300	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	300	-
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	300	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	300	-
5.2 and Table 1 x(Ash content )	-	300	-
3(TYPES)	-	300	-
4.1(Raw Material)	-	300	-
4.2(Tapes – Width IS 6192 and IS 11197)	-	300	-
4.2(Tapes – Linear Density )	-	300	-
4.2(Construction)	-	300	-
4.3(Sacks)	-	300	-
4.3.1(Bottom Seam)	-	300	-
4.3.1( The two rows of stitches shall be separated from each other)	-	300	-
4.3.1( The outer stitch)	-	300	-
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	300	-
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	300	-
4.3.1(The number of stitches/dm)	-	300	-
4.3.2(Mouth)	-	300	-
4.4 and Table 1 i(Capacity)	-	300	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	300	-
5.2 and Table 1 ii b(Dimensions Inside Width)	-	300	-
5.2 and Table 1 iii(Ends per dm )	-	300	-
5.2 and Table 1 iv(Picks per dm )	-	300	-
5.1 and Table 1 v(Mass of sack )	-	300	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	300	-
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	300	-
5.2 and Table 1 vi(Breaking strength of bottom seam )	-	300	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	300	-
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	300	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	300	-
5.2 and Table 1 x(Ash content )	-	300	-
4.2 (Mesh size and weight in g/cm2) (amendment 3)(Mesh size and weight in g/cm2)	-	300	-
3(TYPES)	-	300	-
4.1(Raw Material)	-	300	-
4.2(Tapes – Width IS 6192 and IS 11197)	-	300	-
4.2(Tapes – Linear Density )	-	300	-
4.2(Construction)	-	300	-
4.3(Sacks)	-	300	-
4.3.1(Bottom Seam)	-	300	-
4.3.1( The two rows of stitches shall be separated from each other)	-	300	-
4.3.1( The outer stitch)	-	300	-
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	300	-
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	300	-
4.3.1(The number of stitches/dm)	-	300	-
4.3.2(Mouth)	-	300	-
4.4 and Table 1 i(Capacity)	-	300	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	400	-
5.2 and Table 1 ii b(Dimensions Inside Width)	-	400	-
5.2 and Table 1 iii(Ends per dm )	-	400	-
5.2 and Table 1 iv(Picks per dm )	-	400	-
5.1 and Table 1 v(Mass of sack )	-	400	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	400	-
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	400	-
5.2 and Table 1 vi(Breaking strength of bottom seam )	-	400	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	400	-
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	400	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	400	-
5.2 and Table 1 x(Ash content )	-	400	-
3(TYPES)	-	400	-
4.1(Raw Material)	-	400	-
4.2(Tapes – Width IS 6192 and IS 11197)	-	400	-
4.2(Tapes – Linear Density )	-	400	-
4.2(Construction)	-	400	-
4.3(Sacks)	-	400	-
4.3.1(Bottom Seam)	-	400	-
4.3.1( The two rows of stitches shall be separated from each other)	-	400	-
4.3.1( The outer stitch)	-	400	-
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	400	-
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	400	-
4.3.1(The number of stitches/dm)	-	400	-
4.3.2(Mouth)	-	400	-
4.4 and Table 1 i(Capacity)	-	400	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	400	-
5.2 and Table 1 ii b(Dimensions Inside Width)	-	400	-
5.2 and Table 1 iii(Ends per dm )	-	400	-
5.2 and Table 1 iv(Picks per dm )	-	400	-
5.1 and Table 1 v(Mass of sack )	-	400	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	400	-
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	400	-
5.2 and Table 1 vi(Breaking strength of bottom seam )	-	400	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	400	-
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	400	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	400	-
5.2 and Table 1 x(Ash content )	-	400	-
4.2 (Mesh size and weight in g/cm2) (amendment 3)(Mesh size and weight in g/cm2)	-	400	-

08 May, 2028

-
Included w.e.f. 01.09.2025

3288

WELL TECH TEST AND RESEARCH CENTER, DERABASSI

9177306

IS 4329 (1967)

Specification for measuring (Travelling) microscope

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No. 3(Dimension)	-	3000	-
Cl. No. 4(General requirement)	-	3000	-
Cl. No. 5(Functional requirement)	-	3000	-
Cl. No. 6.1(stage)	-	2000	-
Cl. No. 6.2(Magnification)	-	2000	-
Cl. No. 6.3(Numerical aperture)	-	2000	-
Cl. No. 6.4(Resolving Power)	-	2000	-
Cl. No. 6.5(Moment of horizontal cartillage )	-	2000	-
Cl. No. 6.6(Vertical moment)	-	2000	-
Cl. No. 6.7.1(Cross wire)	-	2000	-
Cl. No. 6.8(Fine motion )	-	2000	-
Cl. No. 7(Marking)	-	1000	-
Cl. No. 3(Dimension)	-	0	REPEAT
Cl. No. 4(General requirement)	-	0	REPEAT
Cl. No. 5(Functional requirement)	-	0	REPEAT
Cl. No. 6.1(stage)	-	0	REPEAT
Cl. No. 6.2(Magnification)	-	0	REPEAT
Cl. No. 6.3(Numerical aperture)	-	0	REPEAT
Cl. No. 6.4(Resolving Power)	-	0	REPEAT
Cl. No. 6.5(Moment of horizontal cartillage )	-	0	REPEAT
Cl. No. 6.6(Vertical moment)	-	0	REPEAT
Cl. No. 6.7.1(Cross wire)	-	0	REPEAT
Cl. No. 6.8(Fine motion )	-	0	REPEAT
Cl. No. 7(Marking)	-	0	REPEAT
Cl. No. 3(Dimension)	-	0	REPEAT
Cl. No. 4(General requirement)	-	0	REPEAT
Cl. No. 5(Functional requirement)	-	0	REPEAT
Cl. No. 6.1(stage)	-	0	REPEAT
Cl. No. 6.2(Magnification)	-	0	REPEAT
Cl. No. 6.3(Numerical aperture)	-	0	REPEAT
Cl. No. 6.4(Resolving Power)	-	0	REPEAT
Cl. No. 6.5(Moment of horizontal cartillage )	-	0	REPEAT
Cl. No. 6.6(Vertical moment)	-	0	REPEAT
Cl. No. 6.7.1(Cross wire)	-	0	REPEAT
Cl. No. 6.8(Fine motion )	-	0	REPEAT
Cl. No. 7(Marking)	-	0	REPEAT

30 Mar, 2027

-
Cl. No. 4 (General requirement) THERMAL EXPANSION COEFFICENT EQUIPMENT NOT AVAILABLE

3289

GLOBAL COMPLIANCE LABORATORY INDIA, GHAZIABAD

5172706

IS 302 : Part 2 : Sec 206 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 206 electric coffee makers

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
32(Radiation hazards)	-	3000	-
31(Resistance to Rusting)	-	3000	-
30(Resistance to Heat, Fire and Tracking)	-	3000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	3000	-
28(Screws & Connection)	-	3000	-
27(Provision For Earthing)	-	3000	-
26(Terminals For External Conductors)	-	3000	-
25(Supply Connection & External Flexible Cables and Cords)	-	3000	-
23(Internal wiring)	-	3000	-
22(Construction)	-	3000	-
21(Mechanical strength)	-	3000	-
20(Stability & Mechanical Hazards)	-	3000	-
19(Abnormal Operation)	-	3000	-
18(Endurance)	-	3000	-
17(Overload Protection)	-	3000	-
15(Moisture Resistance)	-	3000	-
14(Radio and television interference suppression/ Transient Overvoltages)	-	3000	-
13(Electrical insulation and Leakage Current at Operating Temperature)	-	3000	-
12(Operation under overload conditions of appliances with heating elements)	-	3000	-
11(Temperature Rise/Heating)	-	3000	-
10(Input)	-	3000	-
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	3000	-
7(Marking/ Marking & Instructions)	-	3000	-
6(Classification)	-	3000	-
5(Rating)	-	3000	-
16(Insulation resistance and Electric Strength (After humidity treatment))	-	3000	-

20 Jun, 2026

-
Included w.e.f. 29.09.2025 Exclusion: "24 (Component) 9 (Starting Of Motor Operated Appliances) 19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.4 (Surge immunity test) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Harmonics) "

3290

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 17549 (2021)

Textiles - Cotton Khadi Durries - Specification

All

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Yarn)	-	1000	-
4.2(Durries)	-	1000	-
5.1-Table 1-(i)(Count of Yarn)	-	1000	-
5.1-Table 1-(ii)(Ends)	-	1000	-
5.1-Table 1-(iii)(Picks)	-	1000	-
5.1-Table 1-(iv)(Mass g/m2)	-	1000	-
5.1-Table 1-(v)(Breaking Load 10x20 cm Strip N)	-	1000	-
5.2-Table 2-(i)(Fiber Identification)	-	1000	-
5.2-Table 2-(ii),(a)(Light)	-	1000	-
5.2-Table 2-(ii),(b)(Washing)	-	1000	-
5.2-Table 2-(ii),(c)(Color)	-	1000	-
5.3(Dimensions)	-	1000	-
6(Freedom From Defects)	-	2000	-
7(Marking)	-	2000	-
8(Packing)	-	2000	-
4.1(Yarn)	-	2000	-
4.2(Durries)	-	2000	-
5.1-Table 1-(i)(Count of Yarn)	-	2000	-
5.1-Table 1-(ii)(Ends)	-	2000	-
5.1-Table 1-(iii)(Picks)	-	2000	-
5.1-Table 1-(iv)(Mass g/m2)	-	2000	-
5.1-Table 1-(v)(Breaking Load 10x20 cm Strip N)	-	2000	-
5.2-Table 2-(i)(Fiber Identification)	-	2000	-
5.2-Table 2-(ii),(a)(Light)	-	2000	-
5.2-Table 2-(ii),(b)(Washing)	-	2000	-
5.2-Table 2-(ii),(c)(Color)	-	2000	-
5.3(Dimensions)	-	2000	-
6(Freedom From Defects)	-	3000	-
7(Marking)	-	0	-
8(Packing)	-	0	-

08 May, 2028

-
Included w.e.f. 01.09.2025

3291

Excel Surveyors Pvt. Ltd., Kolkata

5135906

IS 18573 (2024)

Cold formed welded carbon steel square and rectangular hollow sections for mechanical, general engineering and decorative purposes ï¿½ Specification

Grade-YSt 160, YSt 210, Yst 240, YSt 310, YSt 355

7100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 3.0(Types)	-	300	-
Clause.4.0(Carbon)	-	200	-
Clause.4.0(Sulphur)	-	200	-
Clause.4.0(Sulphur)	-	200	-
Clause.4.0(Phosphorus)	-	200	-
Clause.4.0(Silicon)	-	200	-
Clause.4.0(Manganese)	-	200	-
Clause.5.0(Supply of Material)	-	0	Exclusion
Clause.5.0(Supply of Material)	-	0	Exclusion
Clause.6.0(Workmanship)	-	200	-
Clause.7.0(Straightness)	-	200	-
Clause.8.0(Basis of Calculation)	-	300	-
Clause.9.0(Length)	-	250	-
Clause.10.0(Dimensions and properties)	-	500	-
Clause.10.0(Dimensions and properties)	-	0	-
Clause.11.0(General)	-	200	-
Clause.11.0(Outside Dimension)	-	350	-
Clause.11.0(Thickness)	-	150	-
Clause.11.0(Thickness)	-	0	-
Clause.11.0(Concavity and Convexity)	-	300	-
Clause.11.0(Squareness of Sides)	-	200	-
Clause.11.0(External Corner Radiius)	-	200	-
Clause.11.0(Straightness and twist)	-	300	-
Clause.12.0(Dimension Tolerances)	-	350	-
Clause.12.0(Dimension Tolerances)	-	0	-
Clause.13.0(Surface Protection)	-	500	-
Clause.14.0(Testing)	-	0	-
Clause.15.0(Tensile test)	-	700	-
Clause.15.0(Yield strength)	-	0	-
Clause.15.0(Elognation Percent)	-	0	-
Clause.18.0(Marking)	-	200	-
6(Workmanship)	-	0	-
10(Dimensions and Properties)	-	0	-
11(Measurement of Shape and Size)	-	500	-
12(Dimensions and Tolerances)	-	0	-
13(Surface Protection)	-	0	-
15(Tensile Test)	-	0	-

31 Dec, 2026

-
Included w.e.f 01.09.2025

3292

EMC Testing and Compliance LLP, Gurugram

8141526

IS 302 : Part 2 : Sec 42 (2024)

Household and Similar Electrical Appliancesï¿½Safety Part 2 Particular Requirements Section 42 Commercial electric forced convection ovens, steam cookers and steam-convection ovens

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	1000	-
8(Protection against access to live parts)	-	2000	-
10(Power input and current)	-	2500	-
11(Heating)	-	2000	-
13.1 &13.2(Leakage current test)	-	2000	-
13.1 &13.3(Electric strength test)	-	2000	-
14(Transient overvoltages)	-	2000	-
15(Moisture resistance)	-	3000	-
15.3(Moisture resistance)	-	2000	-
15.101(Moisture resistance)	-	2000	-
16.1 &16.2(Leakage current test)	-	2000	-
16.1 & 16.3(Electric strength test)	-	2000	-
17(Overload protection of transformers and associated circuits)	-	2000	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	2000	-
19.101(Abnormal operation)	-	2000	-
20.1(Stability and mechanical hazards)	-	2000	-
20.2(Stability and mechanical hazards)	-	2000	-
20.101(Stability and mechanical hazards)	-	2000	-
20.102(Stability and mechanical hazards)	-	2000	-
21(Mechanical strength)	-	2000	-
21.101(Mechanical strength)	-	2000	-
22(Construction)	-	2000	For clause 22
22.101(Construction)	-	1000	-
22.102(Construction)	-	1000	-
22.103(Construction)	-	1000	-
22.104(Construction)	-	1000	-
22.105(Construction)	-	1000	-
22.106(Construction)	-	1000	-
22.107(Construction)	-	1000	-
22.108(Construction)	-	1000	-
22.109(Construction)	-	1000	-
22.109(Construction)	-	1000	-
22.110(Construction)	-	1000	-
22.111(Construction)	-	1000	-
22.112(Construction)	-	1000	-
22.113(Construction)	-	1000	-
22.114(Construction)	-	1000	-
22.115(Construction)	-	1000	-
22.116(Construction)	-	1000	-
22.117(Construction)	-	1000	-
22.118(Construction)	-	1000	-
22.119(Construction)	-	1000	-
23(Internal wiring)	-	2000	-
24(Components)	-	1000	-
25("Supply connection and external flexible cords")	-	2000	-
26("Terminals for external conductors")	-	2000	-
27(Provision for earthing)	-	2000	-
28(Screws and connections)	-	2000	-
29("Clearances, creepage distances and solid insulation")	-	2000	-
30(Resistance to heat and fire)	-	2000	-
30.101(Resistance to heat and fire)	-	2000	-
31(Resistance to rusting)	-	2000	-

19 Jul, 2027

-
" Included w.e.f 20.11.2025 Exclusion: 32 (""Radiation, toxicity and similar hazards"") Cl 24 (Components) 19.11.4.1 to 19.11.4.7(EMI/EMC)"

3293

Excel Surveyors Pvt. Ltd., Kolkata

5135906

IS 4923 (2017)

Hollow steel sections for structural use - Specification (Third Revision)

Grade-YSt 210, YSt 240, YSt 310, YSt 355, YSt 420, YSt 460

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.7.1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	(For chemical test, the testing charges will be 800/-)
Cl.7.1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.7.1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.7.1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.7.1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.7.1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.7.1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.7.1(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.7.1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.7.1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.7.1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.7.1(Carbon Equivalent-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Depth))	-	50	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Width))	-	50	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Thickness))	-	50	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Weigth))	-	50	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Area of Section))	-	50	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia))	-	50	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about X-X))	-	50	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about Y-Y))	-	50	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration))	-	50	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration about X-X))	-	50	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Radius of Gyration about Y-Y))	-	50	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Elastic Modulus))	-	50	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about X-X))	-	50	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about Y-Y))	-	50	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus))	-	50	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus about X-X))	-	50	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Plastic Modulus about Y-Y))	-	50	-
Cl. 10.1, 14.1, 18.1(Straightness)	-	100	-
Cl. 10.2, Fig 1(Outside dimension (B))	-	50	-
Cl. 10.2, Fig 1(Outside dimension (H))	-	50	-
Cl. 10.2, Fig 1(Outside dimension (T))	-	50	-
Cl. 10.4, Fig 2(Concavity, X1)	-	100	-
Cl. 10.4, Fig 2(Convexity, X2)	-	100	-
Cl. 10.5, Fig 3(Squareness of side)	-	100	-
Cl. 10.6, Fig 4(External Corner Radius)	-	100	-
Cl. 10.7, Fig 5(Total twist, V)	-	200	-
Cl. 15.2, Table 3(Tensile Strength- IS 1608)	-	300	-
Cl. 15.2, Table 3(Yield Strength- IS 1608)	-	0	-
Cl. 15.2, Table 3(Elongation- IS 1608)	-	0	-
Cl. 14.1(Exact Length)	-	50	-
Cl. 14.1(Random Length)	-	50	-
Cl. 14.1(Weight on individual length)	-	100	-
Cl. 14.1(Weight on lots of 10 tonnes min)	-	0	Exclusion
Cl. 18, Note 2(Internal Fin Height (Only for Cold Formed))	-	100	-
7(Micro Alloying elements(Nb+V+Ti))	-	300	-
7(Carbon equivalent as CE)	-	200	-
10.4(Concavity/Convexity-SOP MT-23)	-	300	-
10.5(Squareness of corner/Sides-SOP MT-23)	-	300	-
10.6("External corner Radius/ Radii of corners-outside - SOP MT-23")	-	200	-
11(Oiling & Painting - IS 4923)	-	300	-
18.1(Height of the internal weld fin - IS 4923)	-	100	-
10.3(Thickness - IS 4923)	-	100	-
13(Marking)	-	100	-
Cl-19(Mechanical Tests)	-	0	-

31 Dec, 2026

-
Included w.e.f 01.09.2025

3294

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 17514 (2025)

Reusable Sanitary Pad/Sanitary Napkin/Period Panties - Specification (First Revision)

All

17000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3.1(Material- cover or the top sheet)	-	1000	-
Cl-3.2(Material- absorbent core;)	-	1000	-
Cl-3.3(Material- bottom layer.)	-	1000	-
Cl-4(MANUFACTURE, WORKMANSHIP AND FINISH)	-	1000	-
Cl-5(FASTENING MECHANISM)	-	1000	-
Cl-6, Table-1(Length (mm) (Absorbent Core Only))	-	1000	-
Cl-6, Table-1(Width (mm) (Absorbent Core Only))	-	1000	-
Cl-7(WASHING, DRYING AND HANDLING INSTRUCTION)	-	1000	-
Cl-8, Table-2 (i) (a)("Colour fastness to rubbing: Dry ")	-	1000	-
Cl-8, Table-2 (i) (b)(Colour fastness to rubbing: Wet)	-	1000	-
Cl-8, Table-2 (ii) (a)("Colour fastness to perspiration (acidic and alkaline): Colour change ")	-	500	-
Cl-8, Table-2 (ii) (b)(Colour fastness to perspiration (acidic and alkaline): Staining)	-	500	-
Cl-8, Table-2 (iii) (a)(Colour fastness to washing: Colour change)	-	500	-
Cl-8, Table-2 (iii) (b)(Colour fastness to washing: Staining)	-	500	-
Cl-8, Table-2 (iv)("Dimensional stability to washing, percentage, Max Length and width")	-	500	-
Cl-9.1(pH Value)	-	500	-
Cl-9.2(Ability to Withstand Pressure after Absorption)	-	500	-
Cl-9.3(Hygiene Testing Requirement)	-	500	-
Cl-9.3.1(Bacterial and Fungal Bioburden)	-	500	-
Cl-9.3.2(Test for Common Skin Pathogen — Staphylococcus Aureus)	-	500	-
Cl-9.3.3(Good Manufacturing Practice Guideline for Hygiene Requirement)	-	500	-
Cl-9.4(Biocompatibility Evaluation — Cytotoxicity, Irritation and Skin Sensitization)	-	0	-
Cl-9.5(Phthalate Test)	-	500	-
Cl-12(Marking)	-	500	-
Cl-10(Anti-bacterial activity value)	-	500	-
Cl-3.1(Material- cover or the top sheet)	-	0	-
Cl-3.2(Material- absorbent core;)	-	0	-
Cl-3.3(Material- bottom layer.)	-	0	-
Cl-4(MANUFACTURE, WORKMANSHIP AND FINISH)	-	0	-
Cl-5(FASTENING MECHANISM)	-	0	-
Cl-6, Table-1(Length (mm) (Absorbent Core Only))	-	0	-
Cl-6, Table-1(Width (mm) (Absorbent Core Only))	-	0	-
Cl-7(WASHING, DRYING AND HANDLING INSTRUCTION)	-	0	-
Cl-8, Table-2 (i) (a)("Colour fastness to rubbing: Dry ")	-	0	-
Cl-8, Table-2 (i) (b)(Colour fastness to rubbing: Wet)	-	0	-
Cl-8, Table-2 (ii) (a)("Colour fastness to perspiration (acidic and alkaline): Colour change ")	-	0	-
Cl-8, Table-2 (ii) (b)(Colour fastness to perspiration (acidic and alkaline): Staining)	-	0	-
Cl-8, Table-2 (iii) (a)(Colour fastness to washing: Colour change)	-	0	-
Cl-8, Table-2 (iii) (b)(Colour fastness to washing: Staining)	-	0	-
Cl-8, Table-2 (iv)("Dimensional stability to washing, percentage, Max Length and width")	-	0	-
Cl-9.1(pH Value)	-	0	-
Cl-9.2(Ability to Withstand Pressure after Absorption)	-	0	-
Cl-9.3(Hygiene Testing Requirement)	-	0	-
Cl-9.3.1(Bacterial and Fungal Bioburden)	-	0	-
Cl-9.3.2(Test for Common Skin Pathogen — Staphylococcus Aureus)	-	0	-
Cl-9.3.3(Good Manufacturing Practice Guideline for Hygiene Requirement)	-	0	-
Cl-9.4(Biocompatibility Evaluation — Cytotoxicity, Irritation and Skin Sensitization)	-	0	-
Cl-9.5(Phthalate Test)	-	0	-
Cl-12(Marking)	-	0	-
Cl-10(Anti-bacterial activity value)	-	0	-
Cl-3.1(Material- cover or the top sheet)	-	0	-
Cl-3.2(Material- absorbent core;)	-	0	-
Cl-3.3(Material- bottom layer.)	-	0	-
Cl-4(MANUFACTURE, WORKMANSHIP AND FINISH)	-	0	-
Cl-5(FASTENING MECHANISM)	-	0	-
Cl-6, Table-1(Length (mm) (Absorbent Core Only))	-	0	-
Cl-6, Table-1(Width (mm) (Absorbent Core Only))	-	0	-
Cl-7(WASHING, DRYING AND HANDLING INSTRUCTION)	-	0	-
Cl-8, Table-2 (i) (a)("Colour fastness to rubbing: Dry ")	-	0	-
Cl-8, Table-2 (i) (b)(Colour fastness to rubbing: Wet)	-	0	-
Cl-8, Table-2 (ii) (a)("Colour fastness to perspiration (acidic and alkaline): Colour change ")	-	0	-
Cl-8, Table-2 (ii) (b)(Colour fastness to perspiration (acidic and alkaline): Staining)	-	0	-
Cl-8, Table-2 (iii) (a)(Colour fastness to washing: Colour change)	-	0	-
Cl-8, Table-2 (iii) (b)(Colour fastness to washing: Staining)	-	0	-
Cl-8, Table-2 (iv)("Dimensional stability to washing, percentage, Max Length and width")	-	0	-
Cl-9.1(pH Value)	-	0	-
Cl-9.2(Ability to Withstand Pressure after Absorption)	-	0	-
Cl-9.3(Hygiene Testing Requirement)	-	0	-
Cl-9.3.1(Bacterial and Fungal Bioburden)	-	0	-
Cl-9.3.2(Test for Common Skin Pathogen — Staphylococcus Aureus)	-	0	-
Cl-9.3.3(Good Manufacturing Practice Guideline for Hygiene Requirement)	-	0	-
Cl-9.4(Biocompatibility Evaluation — Cytotoxicity, Irritation and Skin Sensitization)	-	0	-
Cl-9.5(Phthalate Test)	-	0	-
Cl-12(Marking)	-	0	-
Cl-10(Anti-bacterial activity value)	-	0	-
Cl-3.1(Material- cover or the top sheet)	-	-	-
Cl-3.2(Material- absorbent core;)	-	-	-
Cl-3.3(Material- bottom layer.)	-	-	-
Cl-4(MANUFACTURE, WORKMANSHIP AND FINISH)	-	-	-
Cl-5(FASTENING MECHANISM)	-	-	-
Cl-6, Table-1(Length (mm) (Absorbent Core Only))	-	-	-
Cl-6, Table-1(Width (mm) (Absorbent Core Only))	-	-	-
Cl-7(WASHING, DRYING AND HANDLING INSTRUCTION)	-	-	-
Cl-8, Table-2 (i) (a)("Colour fastness to rubbing: Dry ")	-	-	-
Cl-8, Table-2 (i) (b)(Colour fastness to rubbing: Wet)	-	-	-
Cl-8, Table-2 (ii) (a)("Colour fastness to perspiration (acidic and alkaline): Colour change ")	-	-	-
Cl-8, Table-2 (ii) (b)(Colour fastness to perspiration (acidic and alkaline): Staining)	-	-	-
Cl-8, Table-2 (iii) (a)(Colour fastness to washing: Colour change)	-	-	-
Cl-8, Table-2 (iii) (b)(Colour fastness to washing: Staining)	-	-	-
Cl-8, Table-2 (iv)("Dimensional stability to washing, percentage, Max Length and width")	-	-	-
Cl-9.1(pH Value)	-	-	-
Cl-9.2(Ability to Withstand Pressure after Absorption)	-	-	-
Cl-9.3(Hygiene Testing Requirement)	-	-	-
Cl-9.3.1(Bacterial and Fungal Bioburden)	-	-	-
Cl-9.3.2(Test for Common Skin Pathogen — Staphylococcus Aureus)	-	-	-
Cl-9.3.3(Good Manufacturing Practice Guideline for Hygiene Requirement)	-	-	-
Cl-9.4(Biocompatibility Evaluation — Cytotoxicity, Irritation and Skin Sensitization)	-	-	-
Cl-9.5(Phthalate Test)	-	-	-
Cl-12(Marking)	-	-	-
Cl-10(Anti-bacterial activity value)	-	-	-

08 May, 2028

-
Included w.e.f 16.09.2025 Excluding: Cl-9.4 (Biocompatibility Evaluation — Cytotoxicity, Irritation and Skin Sensitization)

3295

GLOBAL COMPLIANCE LABORATORY INDIA, GHAZIABAD

5172706

IS 302 : Part 2 : Sec 13 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 13 frying pans, deep fat fryers and similar appliances

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
32(Radiation ,Toxicity and similar hazards)	-	3000	-
31(Resistance to Rusting)	-	3000	-
30(Resistance to Heat, Fire and Tracking)	-	3000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	3000	-
28(Screws & Connections)	-	3000	-
27(Provision For Earthing)	-	3000	-
26(Terminals For External Conductors)	-	3000	-
25(Supply Connection & External Flexible Cables and Cords)	-	3000	-
23(Internal wiring)	-	3000	-
22(Construction)	-	3000	-
21(Mechanical strength)	-	3000	-
20(Stability & Mechanical Hazards)	-	3000	-
19(Abnormal Operation)	-	3000	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	3000	-
16(Leakage Current and Electric Strength)	-	3000	-
15(Moisture Resistance)	-	3000	-
14(Transient Over Voltage)	-	3000	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	3000	-
11(Temperature Rise/Heating)	-	3000	-
10(Power Input)	-	3000	-
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	3000	-
7(Marking/ Marking & Instructions)	-	3000	-
6(Classification)	-	3000	-
5(Rating)	-	3000	-
31(Resistance to Rusting)	-	3000	-
30(Resistance to Heat, Fire and Tracking)	-	3000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	3000	-
28(Screws & Connections)	-	3000	-
27(Provision For Earthing)	-	3000	-
26(Terminals For External Conductors)	-	3000	-
25(Supply Connection & External Flexible Cables and Cords)	-	3000	-
23(Internal wiring)	-	3000	-
22(Construction)	-	3000	-
21(Mechanical strength)	-	3000	-
20(Stability & Mechanical Hazards)	-	3000	-
19(Abnormal Operation)	-	3000	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	3000	-
16(Leakage Current and Electric Strength)	-	3000	-
15(Moisture Resistance)	-	3000	-
14(Transient Over Voltage)	-	3000	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	3000	-
11(Temperature Rise/Heating)	-	3000	-
10(Power Input)	-	3000	-
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	3000	-
7(Marking/ Marking & Instructions)	-	3000	-
6(Classification)	-	3000	-
5(Rating)	-	3000	-
32(Radiation ,Toxicity and similar hazards)	-	3000	-

20 Jun, 2026

-
Included w.e.f. 04.11.2025 Exclusion: "18 (Endurance) 19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.4 (Surge immunity test) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Harmonics) 24 (Components) 9 (Starting Of Motor Operated Appliances) "

3296

Excel Surveyors Pvt. Ltd., Kolkata

5135906

IS 10748 (2004)

Hot - Rolled steel strip for welded tubes and pipes - Specification (Second Revision)

Grade-1,2,3,4,5,6

4900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8 & Table 3(UTM)	-	500	-
Cl 9(Press)	-	500	-
Cl 11(Workmanship)	-	200	-
Cl 12 & 13(Length, Width & Thickness)	-	300	-
Cl 8 & Table 3(UTM)	-	0	-
Cl 9(Press)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 12 & 13(Length, Width & Thickness)	-	0	-
Cl 8 & Table 3(UTM)	-	0	-
Cl 9(Press)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 12 & 13(Length, Width & Thickness)	-	0	-
7.1(Carbon %)	-	50	-
7.1(Manganese %)	-	50	-
7.1(Phosphorus %)	-	50	-
7.1(Sulphur %)	-	50	-
7.1(Silicon %)	-	50	-
7.1( Copper %)	-	50	-
7.1( Aluminium %)	-	50	-
7.1( Nb)	-	50	-
7.1(V)	-	50	-
7.1( Ti)	-	50	-
7.1(Cr)	-	50	-
7.1(Mo)	-	50	-
7.1(Ni)	-	50	-
7.1( Nitrogen%)	-	50	-
7.1(CE)	-	50	-
7.1(Carbon %)	-	0	-
7.1(Manganese %)	-	0	-
7.1(Phosphorus %)	-	0	-
7.1(Sulphur %)	-	0	-
7.1(Silicon %)	-	0	-
7.1( Copper %)	-	0	-
7.1( Aluminium %)	-	0	-
7.1( Nb)	-	0	-
7.1(V)	-	0	-
7.1( Ti)	-	0	-
7.1(Cr)	-	0	-
7.1(Mo)	-	0	-
7.1(Ni)	-	0	-
7.1( Nitrogen%)	-	0	-
7.1(CE)	-	0	-
7.1(Carbon %)	-	0	-
7.1(Manganese %)	-	0	-
7.1(Phosphorus %)	-	0	-
7.1(Sulphur %)	-	0	-
7.1(Silicon %)	-	0	-
7.1( Copper %)	-	0	-
7.1( Aluminium %)	-	0	-
7.1( Nb)	-	0	-
7.1(V)	-	0	-
7.1( Ti)	-	0	-
7.1(Cr)	-	0	-
7.1(Mo)	-	0	-
7.1(Ni)	-	0	-
7.1( Nitrogen%)	-	0	-
7.1(CE)	-	0	-
Table 1 ( Clauses 7.1 ,7.2 )(TITANIUM)	-	0	-
Table 1 ( Clauses 7.1 ,7.2 )(VANADIUM)	-	0	-
Table 1 ( Clauses 7.1 ,7.2 )(NIOBIUM)	-	0	-
Table 1 ( Clauses 7.1 ,7.2 )(CARBON EQUIVELENT )	-	50	-
Table 1 ( Clauses 7.1 ,7.2 )(Molybdenum)	-	0	-
Table 1 ( Clauses 7.1 ,7.2 )(Chromium)	-	0	-
Table 1 ( Clauses 7.1 ,7.2 )(Nickel)	-	0	-
Table 1 ( Clauses 7.1 ,7.2 )( ALUMINIUM)	-	0	-
Table 1 ( Clauses 7.1 ,7.2 )(SILICON)	-	0	-
Table 1 ( Clauses 7.1 ,7.2 )(NITROGEN)	-	0	-
Table 1 ( Clauses 7.1 ,7.2 )(MANGANESE)	-	0	-
Table 1 ( Clauses 7.1 ,7.2 )(PHOSPHURS)	-	0	-
Table 1 ( Clauses 7.1 ,7.2 )(SULPHUR)	-	0	-
Table 1 ( Clauses 7.1 ,7.2 )( CARBON)	-	0	-
Cl. 14(Weight)	-	300	-
Cl. 12, 13(Camber)	-	300	-
Cl. 12, 13(Thickness)	-	100	-
Cl. 8, Table 3(Elongation)	-	0	-
Cl. 8, Table 3(Yield Stress)	-	0	-
Cl 12 & 13(Length, Width & Thickness)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 9(Press)	-	0	-
Cl 8 & Table 3(UTM)	-	0	-
Cl 8 & Table 3(UTM)	-	0	-
Cl 9(Press)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 12 & 13(Length, Width & Thickness)	-	0	-
7.0 (7)(Micro Alloying elements - IS:8811)	-	300	-
8.0 (1)(Tensile Strength-IS:1608(P1))	-	0	-
8.0 (2)(Yield Strength-IS:1608(P1))	-	0	-
8.0 (3)(Elongation on 5.65 SoA GL-IS:1608(P1))	-	0	-
12 (1)(Width - SOP MT-23)	-	0	-
12 (2)(Thickness- SOP MT-23)	-	0	-
12 (3)(Mass of Strip- SOP MT-23)	-	200	-
15.0 & 15.1(Coil edges - IS:10748)	-	100	-
15.0 & 15.2(Surface finish - IS:10748)	-	200	-
15.0 & 15.5(Telescopicity - IS:10748)	-	200	-
15(Condition of Coil)	-	100	-
16(Marking)	-	100	-
3.4(Vehicle Fuel System)	-	200	-
9(Protective Treatment)	-	200	-
Table 1 ( Clauses 7.1 ,7.2 )(Tungsten (W))	-	50	-
Table 1 ( Clauses 7.1 ,7.2 )(Boron (B))	-	50	-
CL 12(Average Width (04))	-	100	-
CL 12(Average Thickness (08))	-	100	-
Cl 8 & Table 3(UTM)	-	-	-
Cl 9(Press)	-	-	-
Cl 11(Workmanship)	-	-	-
Cl 12 & 13(Length, Width & Thickness)	-	-	-
Cl 8 & Table 3(UTM)	-	-	-
Cl 9(Press)	-	-	-
Cl 11(Workmanship)	-	-	-
Cl 12 & 13(Length, Width & Thickness)	-	-	-
Cl 8 & Table 3(UTM)	-	-	-
Cl 9(Press)	-	-	-
Cl 11(Workmanship)	-	-	-
Cl 12 & 13(Length, Width & Thickness)	-	-	-
7.1(Carbon %)	-	-	-
7.1(Manganese %)	-	-	-
7.1(Phosphorus %)	-	-	-
7.1(Sulphur %)	-	-	-
7.1(Silicon %)	-	-	-
7.1( Copper %)	-	-	-
7.1( Aluminium %)	-	-	-
7.1( Nb)	-	-	-
7.1(V)	-	-	-
7.1( Ti)	-	-	-
7.1(Cr)	-	-	-
7.1(Mo)	-	-	-
7.1(Ni)	-	-	-
7.1( Nitrogen%)	-	-	-
7.1(CE)	-	-	-
7.1(Carbon %)	-	-	-
7.1(Manganese %)	-	-	-
7.1(Phosphorus %)	-	-	-
7.1(Sulphur %)	-	-	-
7.1(Silicon %)	-	-	-
7.1( Copper %)	-	-	-
7.1( Aluminium %)	-	-	-
7.1( Nb)	-	-	-
7.1(V)	-	-	-
7.1( Ti)	-	-	-
7.1(Cr)	-	-	-
7.1(Mo)	-	-	-
7.1(Ni)	-	-	-
7.1( Nitrogen%)	-	-	-
7.1(CE)	-	-	-
7.1(Carbon %)	-	-	-
7.1(Manganese %)	-	-	-
7.1(Phosphorus %)	-	-	-
7.1(Sulphur %)	-	-	-
7.1(Silicon %)	-	-	-
7.1( Copper %)	-	-	-
7.1( Aluminium %)	-	-	-
7.1( Nb)	-	-	-
7.1(V)	-	-	-
7.1( Ti)	-	-	-
7.1(Cr)	-	-	-
7.1(Mo)	-	-	-
7.1(Ni)	-	-	-
7.1( Nitrogen%)	-	-	-
7.1(CE)	-	-	-
Cl. 14(Weight)	-	-	-
Cl. 12, 13(Camber)	-	-	-
Cl. 12, 13(Thickness)	-	-	-
Cl. 8, Table 3(Elongation)	-	-	-
Cl. 8, Table 3(Yield Stress)	-	-	-
Cl 12 & 13(Length, Width & Thickness)	-	-	-
Cl 11(Workmanship)	-	-	-
Cl 9(Press)	-	-	-
Cl 8 & Table 3(UTM)	-	-	-
Cl 8 & Table 3(UTM)	-	-	-
Cl 9(Press)	-	-	-
Cl 11(Workmanship)	-	-	-
Cl 12 & 13(Length, Width & Thickness)	-	-	-
7.0 (7)(Micro Alloying elements - IS:8811)	-	-	-
8.0 (1)(Tensile Strength-IS:1608(P1))	-	-	-
8.0 (2)(Yield Strength-IS:1608(P1))	-	-	-
8.0 (3)(Elongation on 5.65 SoA GL-IS:1608(P1))	-	-	-
12 (1)(Width - SOP MT-23)	-	-	-
12 (2)(Thickness- SOP MT-23)	-	-	-
12 (3)(Mass of Strip- SOP MT-23)	-	-	-
15.0 & 15.1(Coil edges - IS:10748)	-	-	-
15.0 & 15.2(Surface finish - IS:10748)	-	-	-
15.0 & 15.5(Telescopicity - IS:10748)	-	-	-
15(Condition of Coil)	-	-	-
16(Marking)	-	-	-
3.4(Vehicle Fuel System)	-	-	-
9(Protective Treatment)	-	-	-
Table 1 ( Clauses 7.1 ,7.2 )(Tungsten (W))	-	-	-
Table 1 ( Clauses 7.1 ,7.2 )(Boron (B))	-	-	-
CL 12(Average Width (04))	-	-	-
CL 12(Average Thickness (08))	-	-	-

31 Dec, 2026

-
Included w.e.f. 04.09.2025

3297

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 18163 (2023)

Textiles Light weight jute sacking bags for packing 35 kg groundnut with shell Specification

All

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Manufacture)	-	890	-
4.1.1(Manufacture)	-	890	-
4.2(Seam)	-	890	-
4.2(Seam)	-	890	-
4.2(Seam)	-	890	-
Cl-4.2(Seam)	-	890	-
Cl-4.3(Safety Stitch)	-	890	-
Cl-7(Marking)	-	890	-
Cl-4.4(Hemming at the Mouth)	-	890	-
4.4(Hemming at the Mouth)	-	890	-
Cl-4.5(Freedom from Defects)	-	890	-
Cl-5.2, Table 2 (i)(Total number of bags per bale)	-	890	-
Cl-5.2, Table 2 (ii)(Number of bags per bundle)	-	890	-
Cl-5.2, Table 2 (iii)(Contract mass of a bale, kg)	-	890	-
Cl-5.2, Table 2 (iv)(Corrected net mass of a bale, kg)	-	890	-
Cl-5.2, Table 2 (v)(Number of joined bags per bundle of 25 bags)	-	890	-
Cl-5.3(contract moisture regain)	-	890	-
Cl-5.4.2(Additional Requirements for Labelling as Environment Friendly Products (Optional)- Specific Requirements)	-	890	-
Cl-4.1.1 & 5.1, Table 1, i (a)(Dimensions-Outside length, cm)	-	890	-
Cl-4.1.1 & 5.1, Table 1, i (b)(Dimensions- Outside width, cm)	-	890	-
Cl-4.1.1 & 5.1, Table 1 (ii)(Ends/dm)	-	890	-
Cl-4.1.1 & 5.1, Table 1, iii(Picks/dm)	-	890	-
Cl-4.1.1 & 5.1, Table 1, iv(Corrected mass/bag, g, percent)	-	890	-
Cl-4.1.1 & 5.1, Table 1, v (a)(Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): - Warp way)	-	890	-
Cl-4.1.1 & 5.1, Table 1, v (b)(Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): - Weft way)	-	890	-
Cl-4.1.1 & 5.1, Table 1, vi(Average seam strength (5 cm × 20 cm ravelled strip), Min, N (kgf))	-	890	-
Cl-4.1.1 & 5.1, Table 1, vii(Moisture regain, percent, Max)	-	890	-
Cl-4.1.1 & 5.1, Table 1, viii(Oil content on dry de-oiled material, Max)	-	890	-
Cl-4.1(Manufacture)	-	890	-
4.1.1(Manufacture)	-	890	-
4.2(Seam)	-	890	-
4.2(Seam)	-	890	-
4.2(Seam)	-	890	-
Cl-4.2(Seam)	-	890	-
Cl-4.3(Safety Stitch)	-	890	-
Cl-7(Marking)	-	890	-
Cl-4.4(Hemming at the Mouth)	-	890	-
4.4(Hemming at the Mouth)	-	890	-
Cl-4.5(Freedom from Defects)	-	890	-
Cl-5.2, Table 2 (i)(Total number of bags per bale)	-	890	-
Cl-5.2, Table 2 (ii)(Number of bags per bundle)	-	890	-
Cl-5.2, Table 2 (iii)(Contract mass of a bale, kg)	-	890	-
Cl-5.2, Table 2 (iv)(Corrected net mass of a bale, kg)	-	890	-
Cl-5.2, Table 2 (v)(Number of joined bags per bundle of 25 bags)	-	890	-
Cl-5.3(contract moisture regain)	-	890	-
Cl-5.4.2(Additional Requirements for Labelling as Environment Friendly Products (Optional)- Specific Requirements)	-	890	-
Cl-4.1.1 & 5.1, Table 1, i (a)(Dimensions-Outside length, cm)	-	890	-
Cl-4.1.1 & 5.1, Table 1, i (b)(Dimensions- Outside width, cm)	-	890	-
Cl-4.1.1 & 5.1, Table 1 (ii)(Ends/dm)	-	890	-
Cl-4.1.1 & 5.1, Table 1, iii(Picks/dm)	-	890	-
Cl-4.1.1 & 5.1, Table 1, iv(Corrected mass/bag, g, percent)	-	890	-
Cl-4.1.1 & 5.1, Table 1, v (a)(Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): - Warp way)	-	890	-
Cl-4.1.1 & 5.1, Table 1, v (b)(Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): - Weft way)	-	890	-
Cl-4.1.1 & 5.1, Table 1, vi(Average seam strength (5 cm × 20 cm ravelled strip), Min, N (kgf))	-	890	-
Cl-4.1.1 & 5.1, Table 1, vii(Moisture regain, percent, Max)	-	890	-
Cl-4.1.1 & 5.1, Table 1, viii(Oil content on dry de-oiled material, Max)	-	890	-

08 May, 2028

-
Included w.e.f. 01.09.2025

3298

Atckon Laboratories LLP, Bahadurgarh

8186436

IS 2494 : Part 2 (1993)

V - Belts - Endless V - Belts for industrial purposes: Part 2 fire resistant and antistatic V - Belts - Specification

ALL

35400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Fire Resistant Antistatic V-belts)	-	35400	-
3.2(Antistatic V-belts)	-	35400	-
5(Requirements)	-	35400	-
7.1(Fire Resistance Test)	-	35400	-
7.2(Electrical Resistance Test)	-	35400	-
7.3(Tensile Test)	-	35400	-
8(Designation)	-	35400	-
9(Marking)	-	35400	-

19 Jun, 2028

-
Included w.e.f.26.08.2025

3299

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 4246 (2025)

DOMESTIC GAS STOVE AND BUILT IN HOB FOR USE WITH LPG SPECIFICATION (Sixth Revision )

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(General - IS 4246 : 2025)	-	500	-
4.1(General - IS 4246 : 2025)	-	0	-
4.1.1(General - IS 4246 : 2025)	-	0	-
5(Materials - Cl. 5 of IS 5116)	-	1000	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1(Materials - IS 5116)	-	0	-
5.1(Materials - IS 5116)	-	0	-
5.1.1(Materials - IS 5116)	-	0	-
5.1.1(Materials - IS 5116)	-	500	-
5.2(Materials - IS 5116)	-	0	-
5.2(Materials - IS 5116)	-	1000	-
5.3(Materials - IS 5116)	-	500	-
5.5(Materials - IS 5116)	-	500	-
5.5(Materials - IS 5116)	-	0	-
5.5(Materials - IS 5116)	-	0	-
5.7(Materials - IS 5116)	-	500	-
6.1(Design for Maintainance)	-	500	-
6.1(Design for Maintainance)	-	0	-
6.2(Design for Maintainance)	-	0	-
6.2(Design for Maintainance)	-	0	-
6.3(Design for Maintainance)	-	0	-
6.4(Design for Maintainance)	-	0	-
6.5(Design for Maintainance)	-	0	-
6.6(Design for Maintainance)	-	0	-
7.0(Rigidity and Stability)	-	500	-
7.1(Rigidity and Stability)	-	0	-
7.2(Rigidity and Stability)	-	0	-
7.3(Rigidity and Stability)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.2(Workmanship and Finish -)	-	500	-
8.3(Workmanship and Finish -)	-	800	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	900	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
10(Injector Jets)	-	900	-
10(Injector Jets)	-	0	-
10(Injector Jets)	-	0	-
10(Injector Jets)	-	0	-
10(Injector Jets)	-	0	-
10(Injector Jets)	-	0	-
11.1(Burners- Cl. 10 of IS 5116)	-	0	-
11.1(Burners- Cl. 10 of IS 5116)	-	700	-
11.1(Burners- Cl. 10 of IS 5116)	-	0	-
11.1(Burners- Cl. 10 of IS 5116)	-	0	-
11.1(Burners- Cl. 10 of IS 5116)	-	0	-
11.2(Burners)	-	0	-
11.3(Burners)	-	0	-
11.4(Burners)	-	0	-
12.1(Burner Pan Support)	-	700	-
12.2(Burner Pan Support)	-	0	-
12.3(Burner Pan Support)	-	0	-
13.1(Gas Soundness Test - Cl. 16 of IS 5116)	-	700	-
13,2(Gas Soundness Test)	-	0	-
13.2(Gas Leak Detector)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	900	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.2(Gas Inlet Connection)	-	500	-
14.2(Gas Inlet Connection)	-	0	-
14.2(Gas Inlet Connection)	-	0	-
14.2(Gas Inlet Connection)	-	0	-
14.3(Gas Inlet Connection)	-	0	-
14.4(Gas Inlet Connection)	-	0	-
14.5(Gas Inlet Connection - Cl. 17.3 of IS 5116)	-	0	-
14.6(Gas Inlet Connection)	-	0	-
15.0(Strength and Rigidity)	-	600	-
15.0(Strength and Rigidity)	-	0	-
15.0(Strength and Rigidity)	-	0	-
15.0(Strength and Rigidity)	-	0	-
17.0(Gas Consumption Test)	-	1200	-
17.0(Gas Consumption Test)	-	0	-
17.0(Gas Consumption Test)	-	0	-
17.0(Gas Consumption Test)	-	0	-
17.0(Gas Consumption Test)	-	0	-
17.0(Gas Consumption Test)	-	0	-
17.2(Gas Consumption Test - For Gas Stoves)	-	0	-
17.2 (a)(Gas Consumption Test - For Gas Stoves)	-	0	-
17.2 (b)(Gas Consumption Test - For Gas Stoves)	-	0	-
17.2 (c)(Gas Consumption Test - For Gas Stoves)	-	0	-
17.3(Gas Consumption Test - For Built in Hobs)	-	0	-
17.3.1(Gas Consumption Test - For Built in Hobs)	-	0	-
17.3.2(Gas Consumption Test - For Built in Hobs)	-	0	-
18.1(Ignition and Flame Travel)	-	1000	-
18.1(Ignition and Flame Travel)	-	0	-
18.2(Ignition and Flame Travel)	-	0	-
18.3(Ignition and Flame Travel)	-	0	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	0	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	0	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	0	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	0	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	0	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	0	-
19.1(Flame Stability)	-	500	-
19.1.1(Flame Stability)	-	0	-
19.2(Flame Stability)	-	0	-
19.3(Flame Stability)	-	0	-
20(Noise Control)	-	500	-
21(Flash Back)	-	500	-
22(Formation of Soot)	-	500	-
23(Resistance to Draught)	-	500	-
24.1(Combustion)	-	500	-
24.1(Combustion)	-	0	-
24.2(Combustion)	-	0	-
25.1(Fire Hazard and Limiting Temperatures)	-	1000	-
25.1(Fire Hazard and Limiting Temperatures)	-	0	-
25.1(Fire Hazard and Limiting Temperatures)	-	0	-
25.1(Fire Hazard and Limiting Temperatures)	-	0	-
25.2(Fire Hazard and Limiting Temperatures)	-	0	-
26.1(Thermal Efficiency- Gas Stoves)	-	2000	-
26.1(Thermal Efficiency- Gas Stoves)	-	0	-
26.1(Thermal Efficiency- Gas Stoves)	-	0	-
26.1(Thermal Efficiency- Gas Stoves)	-	0	-
26.1(Thermal Efficiency- Gas Stoves)	-	0	-
26.2(Thermal Efficiency- For Built in Hobs)	-	0	-
26.2(Thermal Efficiency- For Built in Hobs)	-	0	-
26.2(Thermal Efficiency- For Built in Hobs)	-	0	-
26.2(Thermal Efficiency- For Built in Hobs)	-	0	-
26.2(Thermal Efficiency- For Built in Hobs)	-	0	-
4.1(General - IS 4246 : 2025)	-	-	-
4.1(General - IS 4246 : 2025)	-	-	-
4.1.1(General - IS 4246 : 2025)	-	-	-
5(Materials - Cl. 5 of IS 5116)	-	-	-
5.1.1(Materials - Toughened glass, if provided,)	-	-	-
5.1.1(Materials - Toughened glass, if provided,)	-	-	-
5.1.1(Materials - Toughened glass, if provided,)	-	-	-
5.1.1(Materials - Toughened glass, if provided,)	-	-	-
5.1.1(Materials - Toughened glass, if provided,)	-	-	-
5.1.1(Materials - Toughened glass, if provided,)	-	-	-
5.1.1(Materials - Toughened glass, if provided,)	-	-	-
5.1.1(Materials - Toughened glass, if provided,)	-	-	-
5.1.1(Materials - Toughened glass, if provided,)	-	-	-
5.1(Materials - IS 5116)	-	-	-
5.1(Materials - IS 5116)	-	-	-
5.1.1(Materials - IS 5116)	-	-	-
5.1.1(Materials - IS 5116)	-	-	-
5.2(Materials - IS 5116)	-	-	-
5.2(Materials - IS 5116)	-	-	-
5.3(Materials - IS 5116)	-	-	-
5.5(Materials - IS 5116)	-	-	-
5.5(Materials - IS 5116)	-	-	-
5.5(Materials - IS 5116)	-	-	-
5.7(Materials - IS 5116)	-	-	-
6.1(Design for Maintainance)	-	-	-
6.1(Design for Maintainance)	-	-	-
6.2(Design for Maintainance)	-	-	-
6.2(Design for Maintainance)	-	-	-
6.3(Design for Maintainance)	-	-	-
6.4(Design for Maintainance)	-	-	-
6.5(Design for Maintainance)	-	-	-
6.6(Design for Maintainance)	-	-	-
7.0(Rigidity and Stability)	-	-	-
7.1(Rigidity and Stability)	-	-	-
7.2(Rigidity and Stability)	-	-	-
7.3(Rigidity and Stability)	-	-	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	-	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	-	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	-	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	-	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	-	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	-	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	-	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	-	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	-	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	-	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	-	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	-	-
8.2(Workmanship and Finish -)	-	-	-
8.3(Workmanship and Finish -)	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
10(Injector Jets)	-	-	-
10(Injector Jets)	-	-	-
10(Injector Jets)	-	-	-
10(Injector Jets)	-	-	-
10(Injector Jets)	-	-	-
10(Injector Jets)	-	-	-
11.1(Burners- Cl. 10 of IS 5116)	-	-	-
11.1(Burners- Cl. 10 of IS 5116)	-	-	-
11.1(Burners- Cl. 10 of IS 5116)	-	-	-
11.1(Burners- Cl. 10 of IS 5116)	-	-	-
11.1(Burners- Cl. 10 of IS 5116)	-	-	-
11.2(Burners)	-	-	-
11.3(Burners)	-	-	-
11.4(Burners)	-	-	-
12.1(Burner Pan Support)	-	-	-
12.2(Burner Pan Support)	-	-	-
12.3(Burner Pan Support)	-	-	-
13.1(Gas Soundness Test - Cl. 16 of IS 5116)	-	-	-
13,2(Gas Soundness Test)	-	-	-
13.2(Gas Leak Detector)	-	-	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	-	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	-	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	-	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	-	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	-	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	-	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	-	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	-	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	-	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	-	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	-	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	-	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	-	-
14.2(Gas Inlet Connection)	-	-	-
14.2(Gas Inlet Connection)	-	-	-
14.2(Gas Inlet Connection)	-	-	-
14.2(Gas Inlet Connection)	-	-	-
14.3(Gas Inlet Connection)	-	-	-
14.4(Gas Inlet Connection)	-	-	-
14.5(Gas Inlet Connection - Cl. 17.3 of IS 5116)	-	-	-
14.6(Gas Inlet Connection)	-	-	-
15.0(Strength and Rigidity)	-	-	-
15.0(Strength and Rigidity)	-	-	-
15.0(Strength and Rigidity)	-	-	-
15.0(Strength and Rigidity)	-	-	-
17.0(Gas Consumption Test)	-	-	-
17.0(Gas Consumption Test)	-	-	-
17.0(Gas Consumption Test)	-	-	-
17.0(Gas Consumption Test)	-	-	-
17.0(Gas Consumption Test)	-	-	-
17.0(Gas Consumption Test)	-	-	-
17.2(Gas Consumption Test - For Gas Stoves)	-	-	-
17.2 (a)(Gas Consumption Test - For Gas Stoves)	-	-	-
17.2 (b)(Gas Consumption Test - For Gas Stoves)	-	-	-
17.2 (c)(Gas Consumption Test - For Gas Stoves)	-	-	-
17.3(Gas Consumption Test - For Built in Hobs)	-	-	-
17.3.1(Gas Consumption Test - For Built in Hobs)	-	-	-
17.3.2(Gas Consumption Test - For Built in Hobs)	-	-	-
18.1(Ignition and Flame Travel)	-	-	-
18.1(Ignition and Flame Travel)	-	-	-
18.2(Ignition and Flame Travel)	-	-	-
18.3(Ignition and Flame Travel)	-	-	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	-	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	-	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	-	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	-	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	-	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	-	-
19.1(Flame Stability)	-	-	-
19.1.1(Flame Stability)	-	-	-
19.2(Flame Stability)	-	-	-
19.3(Flame Stability)	-	-	-
20(Noise Control)	-	-	-
21(Flash Back)	-	-	-
22(Formation of Soot)	-	-	-
23(Resistance to Draught)	-	-	-
24.1(Combustion)	-	-	-
24.1(Combustion)	-	-	-
24.2(Combustion)	-	-	-
25.1(Fire Hazard and Limiting Temperatures)	-	-	-
25.1(Fire Hazard and Limiting Temperatures)	-	-	-
25.1(Fire Hazard and Limiting Temperatures)	-	-	-
25.1(Fire Hazard and Limiting Temperatures)	-	-	-
25.2(Fire Hazard and Limiting Temperatures)	-	-	-
26.1(Thermal Efficiency- Gas Stoves)	-	-	-
26.1(Thermal Efficiency- Gas Stoves)	-	-	-
26.1(Thermal Efficiency- Gas Stoves)	-	-	-
26.1(Thermal Efficiency- Gas Stoves)	-	-	-
26.1(Thermal Efficiency- Gas Stoves)	-	-	-
26.2(Thermal Efficiency- For Built in Hobs)	-	-	-
26.2(Thermal Efficiency- For Built in Hobs)	-	-	-
26.2(Thermal Efficiency- For Built in Hobs)	-	-	-
26.2(Thermal Efficiency- For Built in Hobs)	-	-	-
26.2(Thermal Efficiency- For Built in Hobs)	-	-	-

-
Included w.e.f 13.11.2025

3300

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 18162 (2023)

Textiles Light weight jute sacking bags for packing 50 kg pulses and soyabean Specification

All

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Manufacture)	-	800	-
4.1.1(Manufacture)	-	800	-
4.2(Seam)	-	800	-
4.2(Seam)	-	800	-
4.2(Seam)	-	800	-
4.2(Seam)	-	800	-
4.3(Safety Stitch)	-	800	-
4.3(Safety Stitch)	-	800	-
4.4(Hemming at the Mouth)	-	800	-
4.4(Hemming at the Mouth)	-	800	-
Cl-4.5(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
Cl-4.1.1 & 5.1, Table 1, i (a)(Dimensions-Outside length, cm)	-	800	-
Cl-4.1.1 & 5.1, Table 1, i (b)(Dimensions- Outside width, cm)	-	800	-
Cl-4.1.1 & 5.1, Table 1 (ii)(Ends/dm)	-	800	-
Cl-4.1.1 & 5.1, Table 1, iii(Picks/dm)	-	800	-
Cl-4.1.1 & 5.1, Table 1, iv(Corrected mass/bag, g, percent)	-	800	-
Cl-4.1.1 & 5.1, Table 1, v (a)(Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): - Warp way)	-	800	-
Cl-4.1.1 & 5.1, Table 1, v (b)(Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): - Weft way)	-	800	-
Cl-4.1.1 & 5.1, Table 1, vi(Average seam strength (5 cm × 20 cm ravelled strip), Min, N (kgf))	-	800	-
Cl-4.1.1 & 5.1, Table 1, vii(Moisture regain, percent, Max)	-	800	-
Cl-4.1.1 & 5.1, Table 1, viii(Oil content on dry de-oiled material, Max)	-	800	-
5.1, Table 1, v(Warpway -IS 9113 (Cl.8.6.2))	-	800	-
5.1, Table 1, v(Average breaking load of sacking (ravelled strip method, 10.0 cm × 20.0 cm), Min, N (kgf) Warpway:)	-	800	-
5.1, Table 1, v(Average breaking load of sacking (ravelled strip method, 10.0 cm × 20.0 cm), Min, N (kgf) Weftway:)	-	800	-
4.1(Manufacture)	-	800	-
4.1.1(Manufacture)	-	800	-
4.2(Seam)	-	800	-
4.2(Seam)	-	800	-
4.2(Seam)	-	800	-
4.2(Seam)	-	800	-
4.3(Safety Stitch)	-	800	-
4.3(Safety Stitch)	-	800	-
4.4(Hemming at the Mouth)	-	800	-
4.4(Hemming at the Mouth)	-	800	-
Cl-4.5(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
Cl-4.1.1 & 5.1, Table 1, i (a)(Dimensions-Outside length, cm)	-	800	-
Cl-4.1.1 & 5.1, Table 1, i (b)(Dimensions- Outside width, cm)	-	800	-
Cl-4.1.1 & 5.1, Table 1 (ii)(Ends/dm)	-	800	-
Cl-4.1.1 & 5.1, Table 1, iii(Picks/dm)	-	800	-
Cl-4.1.1 & 5.1, Table 1, iv(Corrected mass/bag, g, percent)	-	800	-
Cl-4.1.1 & 5.1, Table 1, v (a)(Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): - Warp way)	-	800	-
Cl-4.1.1 & 5.1, Table 1, v (b)(Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): - Weft way)	-	800	-
Cl-4.1.1 & 5.1, Table 1, vi(Average seam strength (5 cm × 20 cm ravelled strip), Min, N (kgf))	-	800	-
Cl-4.1.1 & 5.1, Table 1, vii(Moisture regain, percent, Max)	-	800	-
Cl-4.1.1 & 5.1, Table 1, viii(Oil content on dry de-oiled material, Max)	-	800	-
5.1, Table 1, v(Warpway -IS 9113 (Cl.8.6.2))	-	800	-
5.1, Table 1, v(Average breaking load of sacking (ravelled strip method, 10.0 cm × 20.0 cm), Min, N (kgf) Warpway:)	-	800	-
5.1, Table 1, v(Average breaking load of sacking (ravelled strip method, 10.0 cm × 20.0 cm), Min, N (kgf) Weftway:)	-	800	-
4.1(Manufacture)	-	800	-
4.1.1(Manufacture)	-	800	-
4.2(Seam)	-	800	-
4.2(Seam)	-	800	-
4.2(Seam)	-	800	-
4.2(Seam)	-	800	-
4.3(Safety Stitch)	-	800	-
4.3(Safety Stitch)	-	800	-
4.4(Hemming at the Mouth)	-	800	-
4.4(Hemming at the Mouth)	-	800	-
Cl-4.5(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
Cl-4.1.1 & 5.1, Table 1, i (a)(Dimensions-Outside length, cm)	-	800	-
Cl-4.1.1 & 5.1, Table 1, i (b)(Dimensions- Outside width, cm)	-	800	-
Cl-4.1.1 & 5.1, Table 1 (ii)(Ends/dm)	-	800	-
Cl-4.1.1 & 5.1, Table 1, iii(Picks/dm)	-	800	-
Cl-4.1.1 & 5.1, Table 1, iv(Corrected mass/bag, g, percent)	-	800	-
Cl-4.1.1 & 5.1, Table 1, v (a)(Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): - Warp way)	-	800	-
Cl-4.1.1 & 5.1, Table 1, v (b)(Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): - Weft way)	-	800	-
Cl-4.1.1 & 5.1, Table 1, vi(Average seam strength (5 cm × 20 cm ravelled strip), Min, N (kgf))	-	800	-
Cl-4.1.1 & 5.1, Table 1, vii(Moisture regain, percent, Max)	-	800	-
Cl-4.1.1 & 5.1, Table 1, viii(Oil content on dry de-oiled material, Max)	-	800	-
5.1, Table 1, v(Warpway -IS 9113 (Cl.8.6.2))	-	800800	-
5.1, Table 1, v(Average breaking load of sacking (ravelled strip method, 10.0 cm × 20.0 cm), Min, N (kgf) Warpway:)	-	800	-
5.1, Table 1, v(Average breaking load of sacking (ravelled strip method, 10.0 cm × 20.0 cm), Min, N (kgf) Weftway:)	-	800	-
4.1(Manufacture)	-	800	-
4.1.1(Manufacture)	-	800	-
4.2(Seam)	-	800	-
4.2(Seam)	-	800	-
4.2(Seam)	-	800	-
4.2(Seam)	-	800	-
4.3(Safety Stitch)	-	800	-
4.3(Safety Stitch)	-	800	-
4.4(Hemming at the Mouth)	-	800	-
4.4(Hemming at the Mouth)	-	800	-
Cl-4.5(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
Cl-4.1.1 & 5.1, Table 1, i (a)(Dimensions-Outside length, cm)	-	800	-
Cl-4.1.1 & 5.1, Table 1, i (b)(Dimensions- Outside width, cm)	-	800	-
Cl-4.1.1 & 5.1, Table 1 (ii)(Ends/dm)	-	800	-
Cl-4.1.1 & 5.1, Table 1, iii(Picks/dm)	-	800	-
Cl-4.1.1 & 5.1, Table 1, iv(Corrected mass/bag, g, percent)	-	800	-
Cl-4.1.1 & 5.1, Table 1, v (a)(Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): - Warp way)	-	800	-
Cl-4.1.1 & 5.1, Table 1, v (b)(Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): - Weft way)	-	800	-
Cl-4.1.1 & 5.1, Table 1, vi(Average seam strength (5 cm × 20 cm ravelled strip), Min, N (kgf))	-	800	-
Cl-4.1.1 & 5.1, Table 1, vii(Moisture regain, percent, Max)	-	800	-
Cl-4.1.1 & 5.1, Table 1, viii(Oil content on dry de-oiled material, Max)	-	800	-
5.1, Table 1, v(Warpway -IS 9113 (Cl.8.6.2))	-	800	-
5.1, Table 1, v(Average breaking load of sacking (ravelled strip method, 10.0 cm × 20.0 cm), Min, N (kgf) Warpway:)	-	800	-
5.1, Table 1, v(Average breaking load of sacking (ravelled strip method, 10.0 cm × 20.0 cm), Min, N (kgf) Weftway:)	-	1000	-

08 May, 2028

-
Included w.e.f 04.09.2025

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number