BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15122 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

3331

ACCURATE TEST SOLUTIONS LLP

8192806

IS 17425 (2020)

Irrigation Equipment - Quick Coupled Polyethylene Pipes and Fittings for Sprinkler Irrigation Systems - Specification

40 MM TO 200 MM, CLASS 1 TO 4

38000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Dimensions of pipe - i) Outside diameter)	-	1000	-
5(Dimensions of pipe - ii) Wall thickness minimum)	-	1000	-
6(Visual Appearance)	-	500	-
7.1(Hydraulic Characteristics - Quality test)	-	2000	-
7.1(Hydraulic Characteristics - Acceptance test)	-	3000	-
7.2(Reversion Test)	-	2000	-
7.3(Tensile Test- i) Tensile Strength)	-	2000	-
7.3(Tensile Test - ii)Elongation at Break)	-	2000	-
7.4(Fusion Compatibility Test- a) Quality test)	-	2000	-
7.4(Fusion Compatibility Test- b) Acceptance test)	-	3000	-
7.5(Density)	-	2000	-
7.6(Melt Flow Rate)	-	2000	-
7.6(Melt Flow Rate)	-	2000	-
4.2(Carbon black- a)carbon content)	-	2000	-
4.2(Carbon black- b) Dispersion of carbon black)	-	1000	-
7.6(Melt now Rate (MFR))	-	2000	-
7.5(Density)	-	2000	-
7.4 Table-2(Fusion Compatibility Test)	-	3000	-
7.3(Tensile Test)	-	2000	-
7.2(Reversion Test)	-	2000	-
7.1 Table -2(Hydraulic Characteristics)	-	5000	-
6.1(VISUAL APPEARANCE)	-	500	-
5.1.2(Ovality)	-	1000	-
5.1 table -1(DIMENSIONS OF PIPES)	-	3000	-
4.3(Anti-oxidant)	-	2000	-
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	2000	-
4.1.2(The MFR of the material shall be between 0.2 to 1.1 (both inclusive) when tested at 190 T at a nominal load of 50 N by the method prescribed in 7 of IS 2530. The MFR of the material shall also be within 20% of the value declared by the manufacturer.’)	-	2000	-
4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-	2000	-
4.1(melt flow rating (MFR) shall not exceed 1.10 g/10 min.)	-	2000	-
3(CLASSIFICATION OF PIPES)	-	500	-
4.1(Quick Coupled Male and Female Couplers)	-	5000	-
4.1(Quick Coupled Male and Female Couplers)	-	5000	-
4.1.3(Workmanship and appearance)	-	500	-
4.1.4(Holding attachments for coupler parts)	-	2000	-
6.1.3(Weldability Test- a) Quality test)	-	2000	-
6.1.3(Weldability Test- b) Acceptance test)	-	2000	-
3(Quick Coupled pipes)	-	2000	-
3(QUICK COUPLED PIPES)	-	2000	-
4(QUICK COUPLED FITTINGS)	-	2000	-
4.1 (a)(Quick Coupled Male and Female Couplers)	-	2000	-
4.1 (b)(HDPE couplers —)	-	3000	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Aluminium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Copper Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Magnesium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Silicon Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Iron Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Manganese Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Zinc Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Titanium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Chromium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Remarks)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Aluminium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Copper Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Magnesium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Silicon Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Iron Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Manganese Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Zinc Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Titanium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Chromium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Remarks)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Aluminium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Copper Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Magnesium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Silicon Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Iron Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Manganese Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Zinc Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Titanium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Chromium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Remarks)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Aluminium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Copper Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Magnesium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Silicon Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Iron Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Manganese Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Zinc Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Titanium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Chromium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Remarks)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Aluminium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Copper Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Magnesium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Silicon Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Iron Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Manganese Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Zinc Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Titanium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Chromium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Cr + Mn)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Aluminium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Copper Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Magnesium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Silicon Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Iron Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Manganese Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Zinc Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Titanium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Chromium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Cr + Mn)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Aluminium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Copper Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Magnesium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Silicon Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Iron Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Manganese Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Zinc Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Titanium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Chromium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Cr + Mn)	-	0	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Copper Content)	-	0	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Silicon Content)	-	0	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Magnesium Content)	-	0	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Iron Content)	-	0	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Manganese Content)	-	0	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Nickel Content)	-	0	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Zinc Content)	-	0	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Lead Content)	-	0	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Tin Content)	-	0	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Titanium Content)	-	0	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Aluminium Content)	-	0	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Carbon Content)	-	0	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Manganese Content)	-	0	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Sulphur Content)	-	0	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Phosphorous Content)	-	0	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1) Al-Killed(Aluminium Content)	-	0	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1) Si-Killed(Silicon Content)	-	0	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1) Al-Si-Killed(Silicon Content)	-	0	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1) Al-Si-Killed(Aluminium Content)	-	0	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 10(Cabon Black Content)	-	2000	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	2000	-
4.1 .1.2.1(HDPE couplers)	-	2000	-
4.1 .1.2.2(HDPE couplers)	-	2000	-
4.1.4(a)(Holding Attachments for Coupler Parts)	-	2000	-
4.1.4(b)(Holding Attachments for Coupler Parts)	-	2000	-
4.2.1(Quick Coupled ~pe HDPE Fittings)	-	3000	-
4.2.2(Quick Coupled ~pe HDPE Fittings)	-	3000	-
4.2.3(Quick Coupled ~pe HDPE Fittings)	-	3000	-
4.2.4(Quick Coupled ~pe HDPE Fittings)	-	3000	-
4.2.6(Quick Coupled ~pe HDPE Fittings)	-	3000	-
4.2.7(Quick Coupled ~pe HDPE Fittings)	-	3000	-
4.2.7(1 Dimensions of Quick Coupled Pipes and Fittings)	-	3000	-
4.2.7(Reducers Table 1 and 2 of IS 8008 (Part 4))	-	3000	-
4.2.7(Ferrule reducers Table 1 of IS 8008 (Part 5))	-	3000	-
4.2.7(Pipe ends Table 1 of IS 8008 (Part 6))	-	3000	-
4.2.7(End caps Table 1 of IS 8008 (Part 9))	-	3000	-
4.2.7(Insert vatve couplers Table 1 of IS 8008 (Part 3))	-	3000	-
4.2.7(Valve openers Table 1 of IS 8008 (Part 2))	-	3000	-
5.2(Dimensions of Quick Coupled Sprinkler Saddles Table 1.)	-	3000	-
6.1(Quick Coupled Pipes and Fittings)	-	3000	-
6.1.1, 6.1.1.1(Leakage Test)	-	4000	-
6.1.1, 6.1.1.1(Leakage Test)	-	4000	-
6.1.2, 6.1.2.1(Hydraulic Proof Test)	-	5000	-
6.1.2.2(Hydraulic Proof Test)	-	5000	-
6.1.2.2(Hydraulic Proof Test)	-	5000	-
6.1.3, 6.1.3.1(Weldability Test)	-	4000	-
6.1.3.1.1(Weldability Test)	-	4000	-
6.1.3.2(Quick coupled fittings)	-	1000	-
6.2, 6.2.1(Quick Coupled Fittings)	-	1000	-
7.2.1(Visual and Workmanship Requirement)	-	500	-
6.2 b(Material Identification - Male & Female Coupler)	-	1000	-
6.3.3(Material Identification - Insert Valve Coupler)	-	1000	-
6.3.3(Material Identification - Insert Valve Coupler)	-	1000	-
6.3.4()	-	0	-
6.3.5(Material Identification - Saddle)	-	1000	-
6.3.5(Material Identification - Pipe Ends)	-	1000	-
6.3.6(Quick Coupled Pump Connectors - Visual)	-	1000	-
4.2(Metallic Couplers)	-	0	-
4.2(Metallic Couplers)	-	0	-
7.2.1(Leakage Test)	-	3000	-
Cl.4.1.3(Den sity Test)	-	2000	-
Cl.4.1.3(MFR Test)	-	2000	-
Cl.4.1.3(MFR Test)	-	2000	-
Cl.4.1.3(MFR Test)	-	2000	-
Cl.4.1.3(MFR Test)	-	2000	-
Cl.4.1.3(Thermal Stabi lity)	-	2000	-
Cl.4.1.3(Thermal Stabi lity)	-	2000	-
Cl.4.1.3, T-1(Volatile Matter)	-	2000	-
Cl.4.1.3, T-1(Volatile Matter)	-	2000	-
Cl.4.1.3, T-1(Volatile Matter)	-	2000	-
Cl.4.1.3, T-1(Volatile Matter)	-	2000	-
Cl.4.1.3, T-1(Volatile Matter)	-	2000	-
Cl.4.1.3, T-1(Volatile Matter)	-	2000	-
Cl.4.1.3, T-1(Volatile Matter)	-	2000	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.4(Carbon Black Content)	-	2000	-
Cl.4.1.4(Carbon Black Content)	-	2000	-
Cl.4.1.4(Carbon Black Content)	-	2000	-
Cl.4.1.4(Carbon Black Di spersion)	-	2000	-
Cl.4.1.4(Carbon Black Di spersion)	-	2000	-
Cl.4.1.4(Carbon Black Di spersion)	-	2000	-
Cl.5(Di men sion)	-	2000	-
Cl.5.1.l(Outside Diameter)	-	2000	-
Cl.5.1.l(Outside Diameter)	-	2000	-
Cl.6.2.L(Wall Thickness)	-	2000	-
Cl.6.2.4(Workmanship and Appearance)	-	500	-
Cl.6.2.6(Rubber Ring Hardness)	-	2000	-
Cl.6.2.6(Ageing Test)	-	2000	-
Cl.7.1.l(Visual Anneara nce)	-	500	-
Cl.7.1.2(Hydraulic Characteristic)	-	5000	-
Cl.7.1.2(Hydraulic Characteristic)	-	5000	-
Cl.7.1.2(Hydraulic Characteristic)	-	5000	-
Cl.7.1.2(Hydraulic Characteristic)	-	5000	-
Cl.7.1.3(Reversion Test)	-	2000	-
Cl.7.1.3(Reversion Test)	-	2000	-
Cl.7.1.4(Tensile Test)	-	3000	-
Cl.7.1.4(Tensile Test)	-	3000	-
Cl.7.1.4(Tensile Test)	-	3000	-
Cl.7.1.4(Elongation)	-	3000	-
Cl.7.1.4(Elongation)	-	3000	-
Cl.7.1.5(Fusion Compatibility)	-	3000	-
Cl.7.1.5(Fusion Compatibility)	-	3000	-
Cl.7.1.5(Fusion Compatibility)	-	3000	-
Cl.7.1.5(Fusion Compatibility)	-	3000	-
Cl.7.1.6(Corrected Density)	-	2000	-
Cl.7.1.7(MFR Test)	-	2000	-
Cl.7.1.7(MFR Test)	-	2000	-
Cl.7.1.7(MFR Test)	-	2000	-
Cl.7.1.7(MFR Test)	-	2000	-
Cl.7.2.l(Leakage Test)	-	4000	-
Cl.7.2.l(Leakage Test)	-	4000	-
Cl.7.2.l(Leakage Test)	-	4000	-
Cl.7.2.l(Leakage Test)	-	4000	-
Cl.7.2.l(Leakage Test)	-	4000	-
Cl.7.2.2(Cl.7.2.2)	-	0	-
Cl.7.2.3(Weld ability Test)	-	4000	-
Cl.7.2.3(Weld ability Test)	-	4000	-
6.2 (iii) Rubber Rings (a) Shore hardness(Shore hardness)	-	2000	-
6.2 (iii) Rubber Rings (b) Accelerated Storage test(Accelerated Storage test)	-	2000	-
5(Dimensions of pipe (outside diameter, ovality, wall thickness))	-	3000	-
6.1(Thermal Stability (OIT))	-	2000	-
6.1(Volatile Matter)	-	2000	-
6.1(Water content)	-	0	-
6.1(Tensile strength at Yield & Elongation at break)	-	2000	-
6.1(Carbon Black Content)	-	2000	-
6.1(Carbon Black Dispersion)	-	2000	-
6.2.1(Base Density x 2)	-	2000	-
6.2.1(Melt Flow Index x 2)	-	2000	-
6.2.1(Thermal Stability (OIT) x 2)	-	2000	-
6.2.1(Volatile Matter x 2)	-	2000	-
6.2.1(Water content x 2)	-	0	-
6.2.1(Carbon Black Content x 2)	-	2000	-
6.2.1(Carbon Black Dispersion x 2)	-	2000	-
6.2.1(Wall thickness of male & female coupler)	-	1000	-
6.2.4(Workmanship and appearance (Visual))	-	500	-
6.2.5(Holding attachment for coupler parts)	-	2000	-
6.2.5(Material Composition (Chemical Analysis))	-	0	-
4.2.2(Coating thickness (Hot dip Galvanized or Electroplated or Passivated or Powder Coated))	-	0	-
6.2.6(Material Identification (Chemical Analysis))	-	0	-
6.2.6(Color)	-	0	-
6.2.6(Rubber Ring Hardness Shore – A (Before Ageing))	-	2000	-
6.2.6(Ageing Charges for rubber ring)	-	3000	-
7.1.1(Visual appearance of pipes)	-	500	-
7.1.2(Hydraulic Characteristics)	-	5000	-
7.1.2((a) Acceptance Test (48 hrs) / 80˚ C)	-	5000	-
7.1.2((b) Type test ( 165 hrs) / 80˚ C)	-	8000	-
7.1.3(Reversion)	-	2000	-
7.1.4(Tensile strength & elongation)	-	3000	-
7.1.5(Fusion Compatibility test)	-	3000	-
7.1.5((a) Acceptance Test (48 hrs) / 80˚ C)	-	4000	-
7.1.5((b) Type test ( 165 hrs) / 80˚ C)	-	6000	-
7.1.6(Corrected Density)	-	2000	-
7.1.6(Base Density)	-	2000	-
7.1.6(Carbon black Content)	-	2000	-
7.1.7(Melt Flow Rate (MFR))	-	2000	-
7.2.1(Leakage test 1hour / 27°C)	-	4000	-
7.2.2(Hydraulic Proof test 1hour / 27°C)	-	5000	-
7.2.3((a) Acceptance Test (48 hrs) / 80˚ C)	-	5000	-
7.2.3((b) Type test ( 165 hrs) / 80˚ C)	-	6000	-
8(Supply of pipe (Visual))	-	500	-
4.1.1 (Table-1)(Density)	-	2000	-
4.1.1 (Table-1)(Melt Flow Index)	-	2000	-
4.1.1 (Table-1)(Oxidation Induction Time)	-	2000	-
4.1.1 (Table-1)(Volatile Matter)	-	2000	-
4.1.1 (Table-1)(Water content)	-	0	-
4.1.1 (Table-1)(Tensile strength at Yield & Elongation at break)	-	3000	-
4.1.4(Carbon Black Content)	-	2000	-
4.1.4(Carbon Black Dispersion)	-	2000	-
4.1.1(Polyethylene material)	-	5000	-
4.1.3, Table 1,(i)(Bass density)	-	2000	-
4.1.3, Table 1,(ii)(Melt flow rate)	-	2000	-
4.1.3, Table 1,(iii)(Thermal stability)	-	2000	-
4.1.3, Table 1,(iv)(Volatile matter)	-	2000	-
4.1.3, Table 1,(v)(Water content)	-	0	-
4.1.3, Table 1,(vi)(Minimum tensile strength at yield)	-	3000	-
4.1.3, Table 1,(vii)(Minimum elongation at break)	-	3000	-
4.1.4(The Carbon Content and Dispersion)	-	2000	-
4.1.5(Carbon Black Specification)	-	2000	-
4.1.6(Antioxidant)	-	3000	-
4.1.7(Rework Material)	-	0	-
4.2(Metallic Couplers)	-	0	-
5.1, Table 1,(i)(Plain pipes)	-	500	-
5.1, Table 1,(ii)(90° Bends and tee)	-	3000	-
5.1, Table 1,(iii)(Base pipe )	-	3000	-
5.1, Table 1,(iv)(PCN)	-	4000	-
5.1, Table 1,(v)(Reducers, ferrule reducers)	-	4000	-
5.1, Table 1,(vi)(End caps, insert valve coupler, valve openers)	-	4000	-
5.1, Table 1,(vii)(Riser pipe and socket)	-	4000	-
7.1.1(Visual Appearance and Workmanship)	-	500	-
7.1.2(Hydraulic Performance Characteristic)	-	6000	-
7.1.3(Reversion Test)	-	2000	-
7.1.4(Tensile Test)	-	3000	-
7.1.5(Fusion Compatibility Test)	-	4000	-
7.1.6(Corrected Density)	-	2000	-
7.1.7(Melt flow rate)	-	2000	-
7.2.1(Leakage Test)	-	4000	-
7.2.2(Hydraulic Proof Test)	-	5000	-
7.2.3(Weldability Test)	-	4000	-
7.3(Quick Couple Fitting)	-	4000	-
10(Marking)	-	500	-
5.1.2(Squareness)	-	1000	-
Cl 6.3.5, Table 5 Dimension of Quick Coupled Sprinkler Saddles (Foot Batten)(Table 5 Dimension of Quick Coupled Sprinkler Saddles (Foot Batten))	-	4000	-
4.2.5(Quick Coupled ~pe HDPE Fittings)	-	4000	-
Cl.4.1.3, T-1(Water Content)	-	0	-

08 Dec, 2028

-
Cl 4.2 (Material Composition for Metallic Couplers)

3332

ACCURATE TEST SOLUTIONS LLP

8192806

IS 14885 (2022)

Polyethylene Pipes for the Supply of Gaseous Fuels ï¿½ Specification (First Revision)

16 MM TO 630 MM

220000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Grade of material)	-	500	-
4.3(Nominal Diameter)	-	500	-
4.4(Colour)	-	500	-
5.1(Polyethylene compound)	-	2000	-
5.3(Anti-oxidant)	-	2000	-
5.4(U-V stabilizer)	-	0	-
5.7(PE Compound Quality Evaluation)	-	3000	-
5.5(Effect of Gas condensate on the Hydrostatic strength)	-	5000	-
5.6(Resistance to Weathering)	-	20000	-
6.1(Mean out side Diameter (For less than or equal to 25 mm- Average of 8 , For higher diameters average of 6))	-	1000	-
6.1(Out of Roundness (Ovality))	-	1000	-
6.2(Wall thickness (Take 8 reading and Average will be repoted))	-	1000	-
7(Finish)	-	500	-
8.1(Internal pressure creep rupture test for plain at 80 deg. C for 165h)	-	8000	-
8.1(Internal pressure creep rupture test for plain pipes at 20 deg. C for 100h)	-	5000	-
8.1(Internal pressure creep rupture test for plain pipes at 80 deg. C for 1000 h)	-	5000	-
8.2(Reversion Test)	-	2000	-
8.3(Density)	-	2000	-
8.6(Thermal Stability (Oxidation Induction Time))	-	2000	-
8.7(Volatile Matter Content)	-	2000	-
8.8(Tensile Properties (Tensile Yield Strength and Elongation at Break))	-	3000	-
8.9(Resistance to Weathering)	-	20000	-
6.4(Length of Pipe)	-	1000	-
8.4(Melt Flow Rate (MFR))	-	2000	-
8.5(Pigment Dispersion)	-	2000	-
8.10(Slow Crack Growth Rate Test)	-	6000	-
8.11(Squeeze-off)	-	5000	-
5.1, 5.7 Table 2(i) Conventional density (of base polymer))	-	2000	-
5.1, 5.7 Table 2(ii) Melt flow rate (MFR))	-	2000	-
5.1, 5.7 Table 2(iii) Thermal stability (oxidation induction time))	-	2000	-
5.1, 5.7 Table 2(iv) Volatile content)	-	2000	-
5.1, 5.7 Table 2(v) Water content1))	-	0	-
5.1, 5.7 Table 2(vi) Pigment dispersion)	-	2000	-
5.1, 5.7 Table 3(iv) Resistance to slow crack growth rate)	-	6000	-
5.3(Anti-Oxidant)	-	2000	-
5.4(U.V. Stabilizer)	-	0	-
5.5(Effects of Gas Condensate on the Hydrostatic Strength)	-	8000	-
5.6(ii) Hydraulic characteristics)	-	20000	-
5.6(iii) Thermal stability (Oxidation induction time))	-	2000	-
6(Dimensions of pipes)	-	2000	-
7(Finish)	-	500	-
8.1(Hydraulic Characteristics)	-	20000	-
8.2(Reversion test)	-	2000	-
8.3(Density)	-	2000	-
8.4(Melt Flow Rate)	-	2000	-
8.5(Pigment Dispersion)	-	2000	-
8.6(Thermal Stability (Oxidation Induction Time))	-	2000	-
8.7(Volatile Matter Content)	-	2000	-
8.9(Resistance to Weathering)	-	20000	-
8.8(Tensile Properties (Tensile Yield Strength and Elongation at Break))	-	2000	-
8.10(Slow Crack Growth Rate Test)	-	6000	-
8.11(Squeeze-of)	-	5000	-
10(Marking)	-	500	-

08 Dec, 2028

-
Cl 5.4 (U V Stabilizer)

3333

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 13983 (1994)

Stainless Steel Sinks For Domestic Purposes

ALL

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9(Marking)	-	300	-
4(Type)	-	300	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Carbon Content)	-	300	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Silicon Content)	-	300	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Manganese Content)	-	300	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Nickel Content)	-	300	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Chromium Content)	-	300	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Sulphur Content)	-	300	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Phouphorous Content)	-	300	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Nitrogen Content)	-	300	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Carbon Content)	-	300	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Silicon Content)	-	300	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Manganese Content)	-	300	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Nickel Content)	-	300	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Chromium Content)	-	300	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Sulphur Content)	-	300	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Phouphorous Content)	-	300	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Nitrogen Content)	-	300	-
6(Thickness of sheet/strip)	-	300	-
6(Depth of bowl)	-	300	-
6(Internal dimensions of the bowl)	-	300	-
6(Bowl locating limits)	-	300	-
6(Co-ordinating sizes)	-	300	-
7.1(Consruction and workmanship)	-	300	-
7.1.1(Consruction and workmanship)	-	300	-
7.2(Consruction and workmanship)	-	300	-
7.2.1(Consruction and workmanship)	-	300	-
7.3(Drainers)	-	300	-
7.4(Waste outlet)	-	300	-
7.5(Tap holes)	-	300	-
7.6(Overflows)	-	300	-
8(Finish)	-	300	-
5(MATERIALS)	-	300	-
6.1.1(Thickness of Sheet/Strip)	-	300	-
6.1.2(Thickness of Sheet/Strip)	-	300	-
6.2(Depth of Bowls)	-	300	-
6.3(Internal Dimensions of Bowls)	-	300	-
6.4.1(Bowl Locating Limits)	-	300	-
6.5(Coordinating Sizes)	-	300	-
7.1(CONSTRUCTION AND WORKMANSHIP)	-	300	-
7.1.1(CONSTRUCTION AND WORKMANSHIP)	-	300	-
7.2.1(CONSTRUCTION AND WORKMANSHIP)	-	300	-
7.3(CONSTRUCTION AND WORKMANSHIP)	-	300	-
7.4(Waste Outlet)	-	300	-
7.5(Tap Holes)	-	200	-
7.6(OVERFLOW)	-	200	-
Clause no. 4(types)	-	200	-
Caluse no. 5("Material -Austenitic stainless steel of Grade Designation")	-	200	-
Clause no. 6.1(Thickness of sheet)	-	200	-
Clause no. 6.2(Depth of Bowls)	-	200	-
Clause no. 6.3(Internal dimensions of bowls)	-	100	-
Clause no. 6.4(Bowl Locating Limits)	-	100	-
Clause no. 6.5, Table No. 1(Dimension of the sink)	-	100	-
Clause no. 7(Construction and workmanship)	-	100	-
Clause no. 8(Finish)	-	100	-
Clause no. 9(Mark)	-	100	-
9(Marking)	-	0	-
4(Type)	-	0	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Carbon Content)	-	0	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Silicon Content)	-	0	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Manganese Content)	-	0	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Nickel Content)	-	0	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Chromium Content)	-	0	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Sulphur Content)	-	0	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Phouphorous Content)	-	0	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Nitrogen Content)	-	0	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Carbon Content)	-	0	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Silicon Content)	-	0	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Manganese Content)	-	0	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Nickel Content)	-	0	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Chromium Content)	-	0	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Sulphur Content)	-	0	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Phouphorous Content)	-	0	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Nitrogen Content)	-	0	-
6(Thickness of sheet/strip)	-	0	-
6(Depth of bowl)	-	0	-
6(Internal dimensions of the bowl)	-	0	-
6(Bowl locating limits)	-	0	-
6(Co-ordinating sizes)	-	0	-
7.1(Consruction and workmanship)	-	0	-
7.1.1(Consruction and workmanship)	-	0	-
7.2(Consruction and workmanship)	-	0	-
7.2.1(Consruction and workmanship)	-	0	-
7.3(Drainers)	-	0	-
7.4(Waste outlet)	-	0	-
7.5(Tap holes)	-	0	-
7.6(Overflows)	-	0	-
8(Finish)	-	0	-
5(MATERIALS)	-	0	-
6.1.1(Thickness of Sheet/Strip)	-	0	-
6.1.2(Thickness of Sheet/Strip)	-	0	-
6.2(Depth of Bowls)	-	0	-
6.3(Internal Dimensions of Bowls)	-	0	-
6.4.1(Bowl Locating Limits)	-	0	-
6.5(Coordinating Sizes)	-	0	-
7.1(CONSTRUCTION AND WORKMANSHIP)	-	0	-
7.1.1(CONSTRUCTION AND WORKMANSHIP)	-	0	-
7.2.1(CONSTRUCTION AND WORKMANSHIP)	-	0	-
7.3(CONSTRUCTION AND WORKMANSHIP)	-	0	-
7.4(Waste Outlet)	-	0	-
7.5(Tap Holes)	-	0	-
7.6(OVERFLOW)	-	0	-
Clause no. 4(types)	-	0	-
Caluse no. 5("Material -Austenitic stainless steel of Grade Designation")	-	0	-
Clause no. 6.1(Thickness of sheet)	-	0	-
Clause no. 6.2(Depth of Bowls)	-	0	-
Clause no. 6.3(Internal dimensions of bowls)	-	0	-
Clause no. 6.4(Bowl Locating Limits)	-	0	-
Clause no. 6.5, Table No. 1(Dimension of the sink)	-	0	-
Clause no. 7(Construction and workmanship)	-	0	-
Clause no. 8(Finish)	-	0	-
Clause no. 9(Mark)	-	0	-

08 May, 2028

-
Included w.e.f.22.09.2025

3334

AJEO TESTING LABS PVT LTD, GHAZIABAD

8178606

IS 280 (2006)

Mild steel wire for general engineering purposes (Fourth Revision)

ALL

7600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	0	-
Cl 9(Tensile Test On UTM)	-	1500	-
Cl 11(Workmanship)	-	0	-
Cl 13(Workmanship)	-	0	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	0	-
Cl 9(Tensile Test On UTM)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 13(Workmanship)	-	0	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	0	-
Cl 9(Tensile Test On UTM)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 13(Workmanship)	-	0	-
6 AND AS PER IS 7887(ALUMINIUM)	-	0	-
6 AND AS PER IS 7887(PHOSPHORUS)	-	200	-
6 AND AS PER IS 7887(SULPHUR)	-	200	-
6 AND AS PER IS 7887(MANGANESE)	-	200	-
6 AND AS PER IS 7887(SILICON)	-	200	-
6 AND AS PER IS 7887(CARBON)	-	200	-
7 & 8(Ovality)	-	0	-
7 & 8(Diameter)	-	500	-
9.2(Wrapping Test)	-	1200	-
9.3(Bend test)	-	500	-
10(Finish)	-	200	-
11(Coating test)	-	2000	-
13(Freedom from defects)	-	500	-
Cl 13(Workmanship)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 9(Tensile Test On UTM)	-	0	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	0	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	0	-
Cl 9(Tensile Test On UTM)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 13(Workmanship)	-	0	-
Clause 6 and Note 3 of IS 7887(Any Instrumental Method/Chemical Method)	-	0	-
Clause 6 and Note 3 of IS 7887(Copper)	-	200	-
14(Packing)	-	0	-
15(Marking)	-	0	-
Clause 6 and Note 3 of IS 7887(Copper)	-	0	-
CL 08(AVG Outer dia (08))	-	0	-
CL 08(MAX OVALITY (08))	-	0	-
6 AND AS PER IS 7887(MICRO ALLOY)	-	0	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	0	-
Cl 9(Tensile Test On UTM)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 13(Workmanship)	-	0	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	0	-
Cl 9(Tensile Test On UTM)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 13(Workmanship)	-	0	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	0	-
Cl 9(Tensile Test On UTM)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 13(Workmanship)	-	0	-
9.3(Bend test)	-	0	-
10(Finish)	-	0	-
11(Coating test)	-	0	-
13(Freedom from defects)	-	0	-
Cl 13(Workmanship)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 9(Tensile Test On UTM)	-	0	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	0	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	0	-
Cl 9(Tensile Test On UTM)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 13(Workmanship)	-	0	-
Clause 6 and Note 3 of IS 7887(Any Instrumental Method/Chemical Method)	-	0	-
Clause 6 and Note 3 of IS 7887(Copper)	-	0	-
14(Packing)	-	0	-
15(Marking)	-	0	-
Clause 6 and Note 3 of IS 7887(Copper)	-	0	-
CL 08(AVG Outer dia (08))	-	0	-
CL 08(MAX OVALITY (08))	-	0	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	0	-
Cl 9(Tensile Test On UTM)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 13(Workmanship)	-	0	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	0	-
Cl 9(Tensile Test On UTM)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 13(Workmanship)	-	0	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	0	-
Cl 9(Tensile Test On UTM)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 13(Workmanship)	-	0	-
9.3(Bend test)	-	0	-
10(Finish)	-	0	-
11(Coating test)	-	0	-
13(Freedom from defects)	-	0	-
Cl 13(Workmanship)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 9(Tensile Test On UTM)	-	0	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	0	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	0	-
Cl 9(Tensile Test On UTM)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 13(Workmanship)	-	0	-
Clause 6 and Note 3 of IS 7887(Any Instrumental Method/Chemical Method)	-	0	-
Clause 6 and Note 3 of IS 7887(Copper)	-	0	-
14(Packing)	-	0	-
15(Marking)	-	0	-
Clause 6 and Note 3 of IS 7887(Copper)	-	0	-
CL 08(AVG Outer dia (08))	-	0	-
CL 08(MAX OVALITY (08))	-	0	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	0	-
Cl 9(Tensile Test On UTM)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 13(Workmanship)	-	0	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	0	-
Cl 9(Tensile Test On UTM)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 13(Workmanship)	-	0	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	0	-
Cl 9(Tensile Test On UTM)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 13(Workmanship)	-	0	-
9.3(Bend test)	-	0	-
10(Finish)	-	0	-
11(Coating test)	-	0	-
13(Freedom from defects)	-	0	-
Cl 13(Workmanship)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 9(Tensile Test On UTM)	-	0	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	0	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	0	-
Cl 9(Tensile Test On UTM)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 13(Workmanship)	-	0	-
Clause 6 and Note 3 of IS 7887(Any Instrumental Method/Chemical Method)	-	0	-
Clause 6 and Note 3 of IS 7887(Copper)	-	0	-
14(Packing)	-	0	-
15(Marking)	-	0	-
Clause 6 and Note 3 of IS 7887(Copper)	-	0	-
CL 08(AVG Outer dia (08))	-	0	-
CL 08(MAX OVALITY (08))	-	0	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	0	-
Cl 9(Tensile Test On UTM)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 13(Workmanship)	-	0	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	0	-
Cl 9(Tensile Test On UTM)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 13(Workmanship)	-	0	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	0	-
Cl 9(Tensile Test On UTM)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 13(Workmanship)	-	0	-
9.3(Bend test)	-	0	-
10(Finish)	-	0	-
11(Coating test)	-	0	-
13(Freedom from defects)	-	0	-
Cl 13(Workmanship)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 9(Tensile Test On UTM)	-	0	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	0	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	0	-
Cl 9(Tensile Test On UTM)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 13(Workmanship)	-	0	-
Clause 6 and Note 3 of IS 7887(Any Instrumental Method/Chemical Method)	-	0	-
Clause 6 and Note 3 of IS 7887(Copper)	-	0	-
14(Packing)	-	0	-
15(Marking)	-	0	-
Clause 6 and Note 3 of IS 7887(Copper)	-	0	-
CL 08(AVG Outer dia (08))	-	0	-
CL 08(MAX OVALITY (08))	-	0	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	0	-
Cl 9(Tensile Test On UTM)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 13(Workmanship)	-	0	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	0	-
Cl 9(Tensile Test On UTM)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 13(Workmanship)	-	0	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	0	-
Cl 9(Tensile Test On UTM)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 13(Workmanship)	-	0	-
9.3(Bend test)	-	0	-
10(Finish)	-	0	-
11(Coating test)	-	0	-
13(Freedom from defects)	-	0	-
Cl 13(Workmanship)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 9(Tensile Test On UTM)	-	0	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	0	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	0	-
Cl 9(Tensile Test On UTM)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 13(Workmanship)	-	0	-
Clause 6 and Note 3 of IS 7887(Any Instrumental Method/Chemical Method)	-	0	-
Clause 6 and Note 3 of IS 7887(Copper)	-	0	-
14(Packing)	-	0	-
15(Marking)	-	0	-
Clause 6 and Note 3 of IS 7887(Copper)	-	0	-
CL 08(AVG Outer dia (08))	-	0	-
CL 08(MAX OVALITY (08))	-	0	-

-
Included w.e.f. 09.10.2025

3335

VERTEX TESTING LABORATORY PRIVATE LIMITED, GHAZIABAD

8185906

IS 1659 (2004)

Block boards - Specification (Fourth Revision)

BWP,MR/Decorative,Commercial/All Size

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.2.6(Spot test - Annexure L)	-	800	-
9.2.5(Modulus of elasticity - MINIMUM INDIVIDUAL - Annexure K)	-	500	-
9.2.5(Modulus of elasticity - AVERAGE - Annexure K)	-	100	-
9.2.5(Modulus of rupture - MINIMUM INDIVIDUAL - Annexure K)	-	500	-
9.2.5(Modulus of rupture - AVERAGE - Annexure K)	-	100	-
9.2.4(Mycological Test [for MR grade only] - Annexure J)	-	500	-
9.2.3(Adhesion of Plies - Annexure H)	-	500	-
9.2.2 (Resistance to water - Annexure G, Annexure H [For MR Grade])	-	300	-
9.2.2 (Resistance to water - Annexure G, Annexure H [For BWP grade])	-	100	-
9.2.1(Dimensional Changes caused by humidity Change in local planeness - Annexure F)	-	200	-
9.2.1(Dimensional Changes caused by humidity - Delamination - Annexure F)	-	200	-
9.2.1(Dimensional Changes caused by humidity - Change in thickness - at 40% RH - Annexure F)	-	200	-
9.2.1(Dimensional Changes caused by humidity - Change in Thickness - at 90% RH - Annexure F)	-	200	-
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 40% RH - Annexure F)	-	200	-
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 90% RH - Annexure F)	-	200	-
7.3(Dimensional Requirements - Variation in thickness - Annexure E)	-	200	-
7.3(Dimensional Requirements - Squareness - Annexure D)	-	200	-
7.3(Dimensional Requirements - Edge Straightness - Annexure D)	-	200	-
7.3(Dimensional Requirements - Thickness - Annexure E)	-	200	-
7.3(Dimensional Requirements - Width - 8.1.4)	-	200	-
7.3(Dimensional Requirements - Length - 8.1.4)	-	200	-
8.1.3, 6.3.3, IS 1328(Visual Inspection - Permissible Defects - IS 1328 [test method for DECORATIVE type])	-	200	-
8.1.3, 6.3.3, IS 303(Visual Inspection - Permissible Defects - IS 303 [test method for COMMERCIAL type])	-	200	-
9.2.6 (mechanical)(Spot test - Annexure L)	-	500	-
cl. 11(marking)	-	100	-
cl. 11.1(marking - BIS certification marking)	-	100	-
Cl-10(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	100	-
6.2(Core- Moisture & Width)	-	300	-
6.3(Cross Bands and Faces- Moisture content)	-	300	-
6.3.1(Thickness of cross band and face veneers)	-	300	-
Cl-7.1(Thickness)	-	300	-
Cl-7.2(Sizes)	-	300	-

23 May, 2028

-
Included w.e.f 16.09.2025

3336

ACCURATE TEST SOLUTIONS LLP

8192806

IS 14333 (2022)

Polyethylene Pipes for Sewerage and Industrial Chemicals and Effluent ï¿½ Specification (First Revision)

63 MM TO 630 MM

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.1,T2("Base Density (At 27°C Temp.)-IS 7328:2020 ")	-	2000	-
5.2.1,T2(Melt Flow Rate (At 190°C /5kg)-IS 2530:1963)	-	2000	-
5.2.1,T2(Thermal Stability(Oxidation Induction Time)-IS 4984:2016(Annexure-B))	-	2000	-
5.2.1,T2("Water Content-IS 4984:2016 (Annexure-D)")	-	0	-
5.2.1.1, T2(Compound Density-IS 7328:2020)	-	2000	-
5.2.1.1, T2("Compound carbon black -IS 2530:1963 content")	-	2000	-
5.2.1.1, T2(Compound Toluene extract - Any Method)	-	2000	-
5.2.1.1, T2(Compound maximum volatile matter -IS 4984:2016 (Annexure-C))	-	2000	-
5.2.1.1, T2(Compound carbon black particle size- Any Method)	-	0	-
5.2.1.1, T2(Compound ash content - Any Method)	-	2000	-
5.2.1.1, T2("Compound carbon black -IS 2530:1963 dispersion")	-	2000	-
5.3(Density of Higher olefin - IS 7328:2020)	-	0	-
5.3(Olefin Constituents- 14333-2022)	-	0	-
5.3(Loading of Carbon Black - IS 2530:1963)	-	2000	-
5.3(Ash content- Any Method)	-	2000	-
5.3(Toluene extract - Any Method)	-	2000	-
5.3("Maximum volatile matter -IS 4984:2016 (Annexure-C)")	-	2000	-
5.3(Carbon black particle size - Any Method)	-	0	-
5.4(Antioxidant - Any Method)	-	2000	-
6(Pipe Description - IS 14333-2022)	-	500	-
6.2(Colour- IS 14333-2022)	-	500	-
7.1(Visual Appearance- IS 14333-2022)	-	500	-
7.2(Length- IS 14333-2022)	-	1000	-
7.3(Coiling- IS 14333-2022)	-	1000	-
7.4,T3 of IS 4984(Outside Diameter-IS 4984-2016)	-	1000	-
7.4,T4 of IS 4984(wall Thickness-IS 4984-2016)	-	1000	-
7.4,T3 of IS 4984(Ovality-IS 4984-2016)	-	1000	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 27 oC , Test Period - 100 hrs.-IS 4984-2016 (Annexure-E))	-	4000	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E))	-	3000	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 165 hrs.-IS 4984-2016 (Annexure-E))	-	5000	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 1000 hrs.-IS 4984-2016 (Annexure-E))	-	10000	-
8.1.2, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E))	-	3000	-
8.2("Longitudinal Reversion Test - IS 4984-2016 (Annexure-F)")	-	2000	-
8.3(Carbon black content- IS 2530-1963)	-	2000	-
8.3(Carbon black content Dispersion- IS 2530-1963)	-	2000	-
8.4(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963)	-	2000	-
8.5(Oxidation Induction Time -IS 4984:2016(Annexure-B))	-	2000	-
8.6(Density-IS 7328:2020)	-	2000	-
8.7("Tensile Strength for Butt Fusion - IS 4984-2016 (Annexure-G)")	-	3000	-
8.8,T5("Tensile - IS 4984-2016 (Annexure-H)")	-	2000	-
8.8,T5("Elongation -IS 4984-2016 (Annexure-H)")	-	2000	-
8.9(Slow Crack Growth Rate{Internal Pressure creep Rupture test, Temperature - 80±1 oC , Test Pressure – 0.80MPa, Test Period - 500 hrs.-IS 4984-2016 (Annexure-E &J))	-	5000	-
5.2.1,T2("Volatile Matter- IS 4984:2016 (Annexure-C)")	-	2000	-

08 Dec, 2028

-
Scope restriction up-to OD of 630 mm

3337

Akshat Test Lab & Calibration Services, Ghaziabad

8186526

IS 555 (1979)

Specification for electric table type fans and regulators (Third Revision)

Specification for electric table type fans and regulators

33000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.16(Creepage Distances and Clearances)	-	1000	-
10.14(Cord Grip Test)	-	1000	-
10.13, 7.4(Mechanical Endurance Test (for Regulators Only))	-	2000	-
10.12(Moisture Resistance Test)	-	1000	-
10.11(Protection against Electric Shock)	-	1000	-
10.1(Earthing Connection)	-	1000	-
10.9(Fan Speed and Input)	-	2000	-
10.8(Construction)	-	2000	-
10.7(Insulation-Resistance Test (Shall follow Moisture Resistance Test Cl.10.12))	-	1000	-
10.6(High Voltage Test)	-	1000	-
10.5(Leakage Current)	-	1000	-
10.4(Temperature-Rise Test)	-	1000	-
10.3(Air Delivery Test)	-	3000	-
9.0(Marking)	-	1000	-
7.11(Oscillating Mechanism)	-	1000	-
7.9(Interchangeability)	-	500	-
7.8(Speed Regulators)	-	1000	-
6.0(Design and General Construction)	-	1000	-
5.0(Rated Frequency)	-	500	-
4.0(Rated Voltages)	-	500	-
3.0(Size, Speed and Types)	-	500	-
7.1(Protection Against Electric Shock)	-	1000	-
7.2(Electrical Insulation Under Normal Operating Conditions)	-	1000	-
7.3(Temperature-rise)	-	1000	-
7.5(Creepage Distances and Clearances)	-	1000	-
7.6(Finish)	-	500	-
7.7(Insulating Materials)	-	500	-
7.10(Oscillating Mechanism)	-	1000	-
8.1, 8.2(Air delivery and service value)	-	3000	TYPE TEST FOR BIS-12000/- FOR OTHER 33000
10.13, 7.4(Mechanical Endurance Test (for Regulators Only))	-	0	-
7.1(Protection Against Electric Shock)	-	0	-
7.2(Electrical Insulation Under Normal Operating Conditions)	-	0	-
7.3(Temperature-rise)	-	0	-
7.5(Creepage Distances and Clearances)	-	0	-
7.6(Finish)	-	0	-
7.7(Insulating Materials)	-	0	-
7.10(Oscillating Mechanism)	-	0	-
8.1, 8.2(Air delivery and service value)	-	0	TYPE TEST FOR BIS-12000/- FOR OTHER 33000

-
Included w.e.f. 09.10.2025

3338

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 17635 (2022)

Beds - Specification

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CLAUSE 4(Design and workmanship)	-	1000	-
CLAUSE 5(Dimensions)	-	5000	-
CLAUSE 6(SURFACE PERFORMANCE)	-	0	-
CLAUSE 6.2(Fabric and Leather (Synthetic and Natural) Performance)	-	0	-
CLAUSE 7(SAFETY TESTS)	-	1500	-
CLAUSE 7.3(Stability Test)	-	0	-
CLAUSE 7.4(Vertical Static Load Tests)	-	3000	-
CLAUSE 7.5(Horizontal Static Load Tests)	-	0	-
CLAUSE 7.5.2(Horizontal Static Load Test of Beds Without Headboard)	-	0	-
CLAUSE 7.6.1(Vertical Durability Test of Bed Base)	-	0	-
CLAUSE 7.6.2(Horizontal Durability Test of Bed Frame)	-	0	-
CLAUSE 7.6.3(Horizontal Durability Test of Headboards)	-	0	-
CLAUSE 7.7(Vertical Impact Test)	-	4000	-
CLAUSE 8.1(Mechanisms for Lifting Bed Bases)	-	4500	-
CLAUSE 8.2(Extendable Storage Elements)	-	4000	-
Cl-5(Dimensions)	-	0	-
Cl-6.1 (a)(Resistance to mechanical damage)	-	1500	-
Cl-6.1 (b)(Pencil hardness)	-	1000	-
Cl-6.1 (c)(Resistance to wet heat)	-	2500	-
Cl-6.1 (d)(Resistance to dry heat)	-	2500	-
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	2000	-
Cl-6.1 (f)(Resistance to marking by cold oils and fats)	-	2000	-
Cl-6.1 (g)(Adhesive performance)	-	1000	-
Cl-6.2 (a) 1(Breaking load)	-	0	-
Cl-6.2 (a) 3(Tear strength)	-	1500	-
Cl-6.2 (a) 4(Colour fastness to light)	-	14000	-
Cl-6.2 (a) 5(Colour fastness to rubbing)	-	2500	-
Cl-6.2 (a) 6(Colour fastness to perspiration)	-	1500	-
Cl-6.2 (a) 7(Colour fastness to water)	-	2000	-
Cl-6.2 (a) 8(Pilling resistance)	-	2000	-
Cl-6.2 (a) 9(Coating adhesion strength)	-	1500	-
Cl-6.2 (a) 10(Seam slippage)	-	1500	-
Cl-6.2 (a) 11(Resistance to damage by flexing)	-	2000	-
Cl-6.2 (a) 12(Abrasion resistance)	-	1500	-
Cl-6.2 (a) 13(Bursting strength)	-	1500	-
Cl-6.2 (a) 14(Resistance to cold)	-	2000	-
Cl-6.2 (b) 1(Tear strength)	-	1500	-
Cl-6.2 (b) 2(Flexing endurance)	-	2500	-
Cl-6.2 (b) 3(Finish adhesion)	-	1000	-
Cl-6.2 (b) 4(Colour fastness to artificial light)	-	15000	-
Cl-6.2 (b) 5(Colour fastness to rubbing)	-	2000	-
Cl-6.2 (b) 6(Colour fastness to water spotting)	-	1500	-
Cl-6.2 (b) 7(Water vapour permeability)	-	2000	-
Cl-6.2 (b) 8(Colour fastness to water)	-	1500	-
Cl-7.1(Safety Tests)	-	0	-
Cl-7.2(Safety Tests)	-	0	-
Cl-7.3(Stability Test)	-	2000	-
Cl-7.4.1(Vertical Static Load on Bed Base)	-	2500	-
Cl-7.4.2(Vertical Static Load on Side Rail)	-	2000	-
Cl-7.5.1(Horizontal Static Load on Headboard)	-	2500	-
Cl-7.5.2(Horizontal Static Load Test of Beds Without Headboard)	-	2000	-
Cl-7.6.1(Vertical Durability Test of Bed Base)	-	3000	-
Cl-7.6.2(Horizontal Durability Test of Bed Frame)	-	2500	-
Cl-7.6.3(Horizontal Durability Test of Headboards)	-	1500	-
Cl-7.7(Vertical Impact Test)	-	3000	-
Cl-8.1.2(Durability of Mechanisms for Lifting Bed Bases)	-	2500	-
Cl-8.2.2(Durability of Extendable Storage Elements)	-	2500	-
Cl-10(Marking)	-	0	-
Cl-6.2 (a) 2(Elongation at break)	-	1000	-

08 Feb, 2027

-
Included w.e.f.22.09.2025

3339

ACCURATE TEST SOLUTIONS LLP

8192806

IS 13592 (2013)

Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System

40 MM T0 315 MM, TYPE A&B

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5(Surface colour of the pipes shall be dark shade of grey)	-	500	-
Cl6.3(The composition shall be based on PVC resin having a K-value of 64 or greater when tested in accordance with IS 4669)	-	2000	-
Cl.7.1(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6))	-	1000	-
Cl.7.1(Outside Diameter at any point (Take 8 reading reported minimum, maximum))	-	1000	-
Cl.7.1(Wall thickness "minimum,maximum" (Take 8 reading))	-	1000	-
Cl.7.2(Pipes shall be supplied in nominal lengths of 2, 3, 4 or 6 metres either plain or with socket for solvent cementing/grooved socket. Tolerances on specified length shall be + 10 mm and – 0 mm.The nominal length of the pipe with socket for solvent cementing/grooved socket shall be as given in Fig. 1.)	-	1000	-
Cl.7.3.1(Minimum wall thickness of socket on pipes shall be as given in Table 2 read with Fig. 2 and Fig. 3.)	-	1000	-
Cl.7.3.2(Dimensions of sockets for solvent cementing and grooved sockets of pipes shall be as given in Tables 3 and 4 respectively, read with Fig. 2 and 3.)	-	1000	-
Cl.8.1(The internal and external surface of the pipes shall be smooth and clean, and free from grooving and other defects. The end shall be clearly cut and shall be square with the axis of the pipe. The end may be chamfered on the plain side.)	-	500	-
Cl.8.2(When tested by the method described in IS 12235 (Part 5), a length of pipe sample of 200 ± 20 mm shall not alter in length by more than 5 percent. In the case of socket ended pipes, this test shall be carried out on the plain portion of pipe taken at least 100 mm away from the root of the socket.)	-	2000	-
Cl8.3(This test shall be carried out for socket end pipes only. When tested by the method described in IS 12235 (Part 6), the test specimens shall not show blisters, excessive delamination or cracking or signs of weld line splitting.)	-	2000	-
Cl.8.4(When determined in accordance with IS 12235 (Part 2), the vicat softening temperature of the specimen shall not be less than 79°C.)	-	2000	-
Cl.8.5(After the required period of exposure, the tensile strengths of two samples when tested as per IS 12235 (Part 13) shall not show difference of more than 20 percent of their initial tensile strengths)	-	8000	-
Cl. 9, IS 12235 Part 7(Resistance to Sulphuric Acid)	-	2000	-
Cl.10.1(When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than 10 percent. Mass of striker and height of fall shall be as per Annex A.)	-	2000	-
Cl.10.2(When determined in accordance with the method described in IS 12235 (Part 13), the tensile strength at break shall not be less than 45 MPa.)	-	2000	-
Cl.10.3(The axial shrinkage shall not exceed 2 percent when determined in accordance with Annex B.)	-	2000	-
Cl.11.(Jointing of solvent cementing joints is to be carried out using solvent conforming to IS 14182. Apply a pressure of 0.05 MPa for a period of 15 min and there should be no leakage at any joint.)	-	2500	-
Cl. 12, IS 12235 Part 11(Resistance to Di-Chloro-Methane)	-	2000	-
8.6(Effect on Water Test)	-	3000	-
14(Marking)	-	500	-
Cl 8.6(Effect on Water Lead (first extraction))	-	3000	-
Cl 8.6(Effect on Water Lead (first extraction))	-	3000	-
Cl 8.6(Effect on Water Lead (third extraction))	-	3000	-
Cl 8.6(Effect on Water Dialkyl tin C4 and higher homologues(measuredas tin )(third extraction ))	-	3000	-
Cl 8.6(Effect on Water Cadmium (mean of first extraction, second extraction and third extraction))	-	3000	-
Cl 8.6(Effect on Water Mercury (mean of first extraction, second extraction and third extraction))	-	3000	-

08 Dec, 2028

-
-

3340

ACCURATE TEST SOLUTIONS LLP

8192806

IS 13488 (2008)

Irrigation equipment - Emitting pipe systems - Specification (First Revision)

12 MM TO 25 MM, CLASS 1 TO 4

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Materials - shall be resistant to fertilizers and chemicals commonly employed in irrigation, and shall be suitable for use with water at temperatures up to 60°C and at pressures designed for the emitting pipe)	-	5000	-
5.1.2 (Ref. Cl 4.1.a of IS 12786 : 1989)(Potyethylene - higher olefins constituent )	-	1000	-
5.1.2 (Ref. Cl 4.1.b of IS 12786 : 1989)(Potyethylene - anti-oxidant)	-	1000	-
5.1.2 (Ref. Cl 4.1.c.i of IS 12786 : 1989)(Density)	-	1000	-
5.1.2 (Ref. Cl 4.1.c.ii of IS 12786 : 1989)(Toluene extract - Annex A of IS 12786:1989)	-	1000	-
5.1.2 (Ref. Cl 4.1.c.iii of IS 12786 : 1989)(Volatile matter - Annex B of IS 12786:1989)	-	1000	-
5.1.2 (Ref. Cl 4.1.c & 4.2.a of IS 12786 : 1989)(Carbon Black content - IS 2530 : 1963)	-	1000	-
5.1.2 (Ref. Cl 4.2.b of IS 12786 : 1989)(The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	1000	-
5.1.2 (Ref. Cl 4.3 of IS 12786 : 1989)(Addition of not more than 10 percent of the manufactures own rework material produced during the manufacture and works testing of pipe complying with this standard is permitted. No other rework material shall be used)	-	0	-
6.2.2(Fittings)	-	500	-
6.3(General)	-	500	-
6.3(General)	-	500	-
8.1.2(Uniformity of Emission Rate for Unregulated Emitting Pipes)	-	2000	-
8.1.3(Uniformity of Emission Rate for Regulated Emitting Pipes)	-	2000	-
8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure)	-	2000	-
8.2.1(Unregu/Qt~d Emining Pipe)	-	2000	-
8.2.2(Regulated Emitting Pipes)	-	2000	-
8.3.1(Wall Thickness ofEmitting Pipe)	-	1000	-
8.3.2(Inside Diameter ofEmitting Pipe)	-	1000	-
8.3.3(Flow Paths in Emitting Unit)	-	1000	-
8.3.4(Spacing ofEmitter Units)	-	1000	-
8.4.1(Resistance to Hydrostatic Pressure at Ambient Temperature)	-	3000	-
8.4.2(Resistance to Hydrostatic Pressure at Elevated Temperature)	-	3000	-
8.5(Resistance to Tension at Elevated Temperature)	-	3000	-
8.5(Resistance to Tension at Elevated Temperature)	-	2000	-
8.5(Resistance to Tension at Elevated Temperature)	-	2000	-
8.6(Resistance to Pull Out of Joints Between Fitting and Emitting IS 13479)	-	2000	-
8.7.1(Resistance of PE Emitting Pipe to Environmental Stress Cracking -Acceptance Test Annex D of IS 12786)	-	2000	-
8.7.2(Resistance of PE Emitting Pipe to Environmental Stress Cracking - Type Test Annex D of IS 12786)	-	2000	-
8.8(Determination of Emitting Unit Exponent)	-	3000	-
9.1(DESIGNATION - Non regulated Emitting Pipe)	-	2000	-
9.2(DESIGNATION - Regulated Emitting Pipe)	-	500	-
4.1 a(Identification)	-	500	-
4.1 a(Identification)	-	500	-
4.1 c(Volatile matter Extract)	-	0	-
4.1 d(Density)	-	0	-
4.1 d(MFI @ 1900C/2.16 Kg)	-	2000	-
4.2(Carbon black content)	-	2000	-
4.2(Carbon black dispersion)	-	2000	-
5.1(Materials)	-	5000	-
6.1.1, Table 1,(i)(Nominal Diameter)	-	500	-
6.1.1, Table 1,(ii)(Inside Diameter)	-	1000	-
6.1.1, Table 1,(iii)(Tolerance on I.D)	-	1000	-
6.1.1, Table 1,(iv)(Wall Thickness)	-	1000	-
6.2(Fittings)	-	1000	-
6.3(General)	-	1000	-
7.1(Test Specimens)	-	2000	-
7.2(Order of Tests)	-	1000	-
7.3(Testing Conditions)	-	1000	-
7.4(Accuracy of Measuring Devices)	-	0	-
8.1(Uniformity of Emission Rate)	-	3000	-
8.1.2(Unregulated Emitting Pipes)	-	3000	-
8.1.3(Regulated Emitting Pipes)	-	3000	-
8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure)	-	3000	-
8.2.1(Unregulated Emitting Pipes)	-	3000	-
8.2.2(Regulated Emitting Pipes)	-	3000	-
8.3.1(Wall Thickness ofEmitting Pipe)	-	1000	-
8.3.2(Inside Diameter ofEmitting Pipe)	-	1000	-
8.3.3(Flow Paths in Emitting Unit)	-	2000	-
8.3.4(Spacing of Emitter Units)	-	1000	-
8.4(Resistance of Emitting Pipes to Hydrostatic Pressure)	-	3000	-
8.5(Resistance to Tension at Elevated Temperature)	-	3000	-
8.6(Resistance to Pull Out ofJoints Between Fitting and Emitting)	-	3000	-
8.7.1(Acceptance Test)	-	5000	-
8.7.2(Type Test)	-	5000	-
8.8(Determination of Emitting Unit Exponen)	-	2000	-
9.1(Non-regulated Emitting Pipe)	-	2000	-
9.2(Regulated Emitting Pipe)	-	2000	-
10.1(Marking)	-	500	-

08 Dec, 2028

-
-

3341

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 17633 (2022)

Tables and Desks - Specification

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CLAUSE 4(Design and workmanship)	-	500	-
ClAUSE 5(Dimensions)	-	1000	-
CLAUSE 6(SURFACE PERFORMANCE REQUIRMENTS)	-	0	-
CLAUSE 7.2.1(Stability Under Vertical Load)	-	1500	-
CLAUSE 7.2.1.1(Test for tables that can be set to a height of 950 mm or less)	-	1500	-
CLAUSE 7.2.1.2(" Test for Tables that can be set to a height greater than 950 mm")	-	2000	-
CLAUSE 7.2.2(Stability with Extension Elements Open Place the table on the floor surface)	-	1500	-
CLAUSE 7.2.3(Stability Under Horizontal Load)	-	2500	-
CLAUSE 7.2.3.1(Test for tables that can be set to a height of 950 mm or less)	-	2000	-
CLAUSE 7.2.3.2(" Test for Tables that can be set to a height greater than 950 mm")	-	1500	-
CLAUSE 7.3.1(Strength under Vertical Static Force)	-	2500	-
CLAUSE 7.3.1.1(Stated load)	-	1500	-
CLAUSE 7.3.1.2(For occasional heavy loads)	-	2000	-
CLAUSE 7.3.2(Strength under horizontal static force)	-	2000	-
CLAUSE 7.4.1(Durability under Vertical Force)	-	3000	-
CLAUSE 7.4.2(Durability of the Height Adjustment Mechanism)	-	2000	-
CLAUSE 7.5.1(Durability and Stiffness Under Horizontal Force)	-	3000	-
CLAUSE 7.5.2(Durability under Horizontal Force)	-	3000	-
CLAUSE 7.5.3(Stiffness of the Structure Under Horizontal Force)	-	2000	-
CLAUSE 7.6.1(Vertical Impact Test)	-	3500	-
CLAUSE 7.6.2(Vertical Impact Test for Glass Table Tops)	-	2000	-
CLAUSE 7.6.3(Vertical Impact Test for All Other Table Tops)	-	2500	-
CLAUSE 7.7(Deflection of Table Tops)	-	1500	-
CLAUSE 7.8(Durability of Tables with Castors)	-	6000	-
CLAUSE 7.9(Drop Test)	-	2500	-
Cl - 5(Dimensions)	-	0	-
Cl-6 (a)(Resistance to mechanical damage)	-	1000	-
Cl-6 (b)(Pencil hardness)	-	1000	-
Cl-6 (c)(Resistance to wet heat)	-	1500	-
Cl-6 (d)(Resistance to dry heat)	-	1500	-
Cl-6 (e)(Resistance to marking by cold liquids)	-	1500	-
Cl-6 (f)(Resistance to marking by cold oils and fats)	-	2000	-
Cl-6 (g)(Adhesive performance)	-	1000	-
Cl-7.2.1(Stability Under Vertical Load)	-	0	-
Cl-7.2.2(Stability with Extension Elements Open)	-	0	-
Cl-7.2.3(Stability Under Horizontal Load)	-	0	-
Cl-7.3.1(Strength under Vertical Static Force)	-	0	-
Cl-7.3.2(Strength under horizontal static force)	-	0	-
Cl-7.4.1(Durability under Vertical Force)	-	0	-
Cl-7.4.2(Durability of the Height Adjustment Mechanism)	-	0	-
Cl-7.5.1(General)	-	0	-
Cl-7.5.2(Durability under Horizontal Force)	-	0	-
Cl-7.5.3(Stiffness of the Structure Under Horizontal Force)	-	0	-
Cl-7.6.1(General)	-	0	-
Cl-7.6.2(Vertical Impact Test for Glass Table Tops)	-	0	-
Cl-7.6.3(Vertical Impact Test for All Other Table Tops)	-	0	-
Cl-7.7(Deflection of Table Tops)	-	0	-
Cl-7.8(Durability of Tables with Castors)	-	0	-
Cl-7.9(Drop Test)	-	0	-
Cl-9(Marking)	-	0	-
7.1(General test conditions)	-	0	-

08 Feb, 2027

-
Included w.e.f.22.09.2025

3342

ACCURATE TEST SOLUTIONS LLP

8192806

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

16 MM TO 63 MM, LIGHT, MEDIUM, HEAVY

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Marking)	-	500	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	500	-
6.3(Standard Mark on Conduit)	-	500	-
7.1.1(Maximum and minimum outside diameter of socket)	-	1000	-
7.1.1 Table-2(Length of Socket end)	-	1000	-
7.1.2(Maximum and minimum outside diameter of conduit)	-	1000	-
7.2(Minimum inside diameter of conduit)	-	1000	-
7.3(Length of conduit)	-	1000	-
7.4(Unifomity of The wall Thickness)	-	1000	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	500	-
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	1000	-
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	2000	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	2000	-
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	2000	-
10(Resistance to Heat -Ball presure test)	-	1500	-
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	1500	-
12(Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	2000	-
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	2000	-
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	0	-
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	0	-
12(3 Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	2000	-
12(3 Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	2000	-
11.0(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	1500	-
10.0(Resistance to Heat -Ball presure test)	-	2000	-
9.5 Fig.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	2000	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	2000	-
9.3(Compression Test (after removal of force) as per caluse 9.3.3 of IS: 9537 (Part 1)-1980)	-	2000	-
9.3(Compression Test at Full force applied (On load))	-	2000	-
9.2(Bending Test At Low Temp (-5 ±2°C))	-	2000	-
9.2(Bending Test At Room Temp)	-	1500	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	500	-
7.4(Unifomity of The wall Thickness)	-	2000	-
7.3(Length of conduit)	-	2000	-
7.2 Fig.3(Minimum inside diameter of conduit)	-	2000	-
7.1.2 Fig.2(Minimum outside diameter of conduit)	-	2000	-
7.1.2 Fig.1(Maximum outside diameter of conduit)	-	2000	-
7.1.1 Table-2(Length of Socket end)	-	1000	-
7.1.1 Fig.8(Maximum inside diameter of socket)	-	1000	-
7.1.1 Fig.7(Maximum outside diameter of socket)	-	1000	-
6.3(Standard Mark on Conduit)	-	500	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	500	-
6.1 - d(Marking)	-	500	-
6.1 - c(Marking)	-	500	-
6.1 - b(Marking)	-	500	-
6.1 - a(Marking)	-	500	-

08 Dec, 2028

-
-

3343

ACCURATE TEST SOLUTIONS LLP

8192806

IS 12786 (2024)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification (first revision)

CLASS-1,2&3 (16 TO 32 MM)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Material)	-	5000	-
Cl-4.2(Carbon content of finished PE lateral pipe)	-	2000	-
Cl-5.1(Dimensions of pipes and wall thicknesses)	-	2000	-
Cl-6.0(Visual Appearance)	-	500	-
Cl-7.1(Hydraulic Characteristics- Internal pressure creep rupture test)	-	3000	-
Cl-7.1(Hydraulic Characteristics- quality acceptance test)	-	3000	-
Cl-7.2(Reversion Test)	-	1500	-
Cl-7.3(Tensile Test)	-	2000	-
Cl-7.3.1(Test Piece)	-	1000	-
Cl-7.3.2(Procedure)	-	1000	-
Cl-7.4(Susceptibility to Environmental Stress Cracking)	-	2000	-
Cl-8.0(Supply of pipes)	-	1000	-
Cl-9.0(Coiling)	-	1000	-
Cl-10.0(Sampling and criteria for conformity)	-	0	-
Cl-11(Marking)	-	500	-
3(Class of Pipe)	-	500	-
5.1 & Table 1(Dimensions of Pipes - Outside diameters)	-	1000	-
5.1 & Table 1(Dimensions of Pipes - Wall thickness)	-	1000	-
6(Visual Appearance)	-	500	-
7.1 & Table 2(Hydraulic Characteristics)	-	3000	-
7.1 & Table 2(Hydraulic Characteristics)	-	3000	-
7.2(Reversion Test)	-	2000	-
7.3(Tensile Strength)	-	2000	-
7.3(Elongation at Break)	-	2000	-
7.4(SusceptibiIity to Environmental Stress Cracking)	-	2000	-
4.2(a)(Carbon Black Content-IS 2530)	-	2000	-
4.2(b)(Carbon Black Dispersion-IS 2530)	-	1500	-

08 Dec, 2028

-
-

3344

Intertek India Private Limited (Gujarat)

7166626

IS/IEC 61730 : PART 1 (2023)

Photovoltaic (PV) Module Safety Qualification Part 1 Requirements for Construction (Second Revision)

484375 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Classification, applications and intended use)	-	15625	-
6.2(Marking and documentation)	-	15625	-
6.3.2(Internal wiring)	-	15625	-
6.3.3(External wiring and cables)	-	15625	-
6.3.4(Module overcurrent protection rating)	-	15625	-
6.3.5(Connectors)	-	15625	-
6.3.6(Junction boxes)	-	15625	-
6.3.7(Frontsheets and backsheets)	-	15625	-
6.3.8(Insulation barriers)	-	15625	-
6.3.9(Electrical connections)	-	15625	-
6.3.10(Encapsulants)	-	15625	-
6.3.11(Bypass diodes)	-	15625	-
6.4(Mechanical and electromechanical connections)	-	15625	-
6.4.2(Screw connections)	-	15625	-
6.4.3(Rivets)	-	15625	-
6.4.4(Thread-cutting screws)	-	15625	-
6.4.5(Form/press/tight fit)	-	15625	-
6.4.6(Connections by adhesives)	-	15625	-
6.4.7(Other connections)	-	15625	-
6.5.2(Polymeric materials)	-	15625	-
6.5.2.3(Flammability)	-	15625	-
6.5.3.2(Current-carrying parts)	-	15625	-
6.5.4(Adhesives)	-	15625	-
6.6.2(Protection against accessibility to hazardous live parts)	-	15625	-
6.6.3(Insulation coordination)	-	15625	-
6.6.3.2.1(Pollution degree)	-	15625	-
6.6.3.3(Creepage distance)	-	15625	-
6.6.3.4(Clearance)	-	15625	-
6.6.4(Distance through functional and relied upon insulation)	-	15625	-
6.6.4.3(Cemented joints)	-	15625	-
6.6.4.4(Distance through functional insulation)	-	15625	-
5(Classification, applications and intended use)	-	-	-
6.2(Marking and documentation)	-	-	-
6.3.2(Internal wiring)	-	-	-
6.3.3(External wiring and cables)	-	-	-
6.3.4(Module overcurrent protection rating)	-	-	-
6.3.5(Connectors)	-	-	-
6.3.6(Junction boxes)	-	-	-
6.3.7(Frontsheets and backsheets)	-	-	-
6.3.8(Insulation barriers)	-	-	-
6.3.9(Electrical connections)	-	-	-
6.3.10(Encapsulants)	-	-	-
6.3.11(Bypass diodes)	-	-	-
6.4(Mechanical and electromechanical connections)	-	-	-
6.4.2(Screw connections)	-	-	-
6.4.3(Rivets)	-	-	-
6.4.4(Thread-cutting screws)	-	-	-
6.4.5(Form/press/tight fit)	-	-	-
6.4.6(Connections by adhesives)	-	-	-
6.4.7(Other connections)	-	-	-
6.5.2(Polymeric materials)	-	-	-
6.5.2.3(Flammability)	-	-	-
6.5.3.2(Current-carrying parts)	-	-	-
6.5.4(Adhesives)	-	-	-
6.6.2(Protection against accessibility to hazardous live parts)	-	-	-
6.6.3(Insulation coordination)	-	-	-
6.6.3.2.1(Pollution degree)	-	-	-
6.6.3.3(Creepage distance)	-	-	-
6.6.3.4(Clearance)	-	-	-
6.6.4(Distance through functional and relied upon insulation)	-	-	-
6.6.4.3(Cemented joints)	-	-	-
6.6.4.4(Distance through functional insulation)	-	-	-

-
Included w.e.f 08.12.2025

3345

Planet Electro Labs Private Limited, Wazirpur

8185226

IS 302 : Part 2 : Sec 203 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 203 electric call bells and buzzers for indoor use

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Rating)	-	1100	-
6(Classification)	-	1100	-
7(Marking)	-	1100	-
8(Protection against Access to Live Parts)	-	1100	-
9(Starting Of Motor Operated Appliances)	-	1100	-
10("Power Input & Current")	-	1100	-
Cl 19.11.4.7(Harmonics)	-	1100	-
11(Temperature Rise/ Heating)	-	1100	-
12(Operation Under Overload Conditions of Appliances with heating Element)	-	1100	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	1100	-
14("Radio and Television Interference Suppression / Transient Over Voltage ")	-	1100	-
15(Moisture Resistance)	-	1100	-
16(Leakage Current and Electric Strength/ Insulation Resistance and Electric Strength (After Humidity treatment))	-	1100	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	1100	-
18(Endurance)	-	1100	-
19(Abnormal Operation)	-	1100	-
20(Stability & Mechanical Hazards)	-	1100	-
21(Mechanical strength)	-	1100	-
22(Construction)	-	1100	-
23(Internal Wiring)	-	1100	-
24(Components)	-	1100	-
25(Supply Connection & External Flexible Cords)	-	1100	-
26(Terminals For External Conductors)	-	1100	-
27(Provision For Earthing)	-	1100	-
28(Screws & Connections)	-	1100	-
29(Clearances, Creepage Distances & Solid Insulation)	-	1100	-
30(Resistance to Heat & Fire)	-	1100	-
31(Resistance to Rusting)	-	1100	-
32(Radiation hazards)	-	1100	-
Cl 19.11.4.1(Electrostatic discharges)	-	1100	-
Cl 19.11.4.2(Radiated fields)	-	1100	-
Cl 19.11.4.3(Fast transient bursts)	-	1100	-
Cl 19.11.4.4(Surge immunity test)	-	1600	-
Cl 19.11.4.5(Immunity to conducted discharges)	-	1600	-
Cl 19.11.4.6(Class 3 Voltage dips and interruptions)	-	1600	-
5(Rating)	-	2000	-
6(Classification)	-	2000	-
7(Marking)	-	2000	-
8(Protection against Access to Live Parts)	-	5000	-
9(Starting Of Motor Operated Appliances)	-	5000	-
10("Power Input & Current")	-	5000	-
11(Temperature Rise/ Heating)	-	5000	-
12(Operation Under Overload Conditions of Appliances with heating Element)	-	6000	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	6000	-
15(Moisture Resistance)	-	8000	-
16(Leakage Current and Electric Strength/ Insulation Resistance and Electric Strength (After Humidity treatment))	-	5000	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	5000	-
18(Endurance)	-	10000	-
19(Abnormal Operation)	-	8000	-
20(Stability & Mechanical Hazards)	-	5000	-
21(Mechanical strength)	-	5000	-
22(Construction)	-	5000	-
23(Internal Wiring)	-	5000	-
24(Components)	-	5000	-
25(Supply Connection & External Flexible Cords)	-	5000	-
26(Terminals For External Conductors)	-	5000	-
27(Provision For Earthing)	-	5000	-
28(Screws & Connections)	-	5000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	5000	-
30(Resistance to Heat & Fire)	-	8000	-
31(Resistance to Rusting)	-	10000	-
32(Radiation hazards)	-	5000	-
Cl 19.11.4.1(Electrostatic discharges)	-	0	-
Cl 19.11.4.2(Radiated fields)	-	0	-
Cl 19.11.4.3(Fast transient bursts)	-	0	-
Cl 19.11.4.4(Surge immunity test)	-	0	-
Cl 19.11.4.5(Immunity to conducted discharges)	-	0	-
Cl 19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
Cl 19.11.4.7(Harmonics)	-	0	-

08 May, 2028

-
Included w.e.f 29.10.2025 Exclusion: Cl 14 ("Radio and Television Interference Suppression / Transient Over Voltage ")

3346

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 17636 (2021)

Bunk Beds - Specification

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CLAUSE 4(DESIGN AND WORKMANSHIP)	-	0	-
CLAUSE 5(DIMENSIONS)	-	4000	-
CLAUSE 6(SURFACE PERFORMANCE)	-	0	-
CLAUSE 6.2(Fabric and Leather (Synthetic and Natural) Performance)	-	0	-
CLAUSE 7.5.1(Attachment, Deflection and Strength of Ladder and Treads)	-	4500	-
CLAUSE 7.6(Strength of Frame and Fastenings)	-	4500	-
CLAUSE 7.7(Stability Test)	-	3000	-
CLAUSE 7.8(Fastening of Upper Bed to Lower Bed)	-	2500	-
Cl-5(Dimensions)	-	0	-
Cl-6.1 (a)(Resistance to mechanical damage)	-	1000	-
Cl-6.1 (b)(Pencil hardness)	-	1000	-
Cl-6.1 (c)(Resistance to wet heat)	-	1500	-
Cl-6.1 (d)(Resistance to dry heat)	-	2000	-
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	2000	-
Cl-6.1 (f)(Resistance to marking by cold oils and fats)	-	2500	-
Cl-6.1 (g)(Adhesive performance)	-	1500	-
Cl-6.2 (a) 1(Breaking load)	-	2000	-
Cl-6.2 (a) 2(Elongation at break)	-	1000	-
Cl-6.2 (a) 3(Tear strength)	-	1500	-
Cl-6.2 (a) 4(Colour fastness to light)	-	15000	-
Cl-6.2 (a) 5(Colour fastness to rubbing)	-	3500	-
Cl-6.2 (a) 6(Colour fastness to perspiration)	-	2500	-
Cl-6.2 (a) 7(Colour fastness to water)	-	2500	-
Cl-6.2 (a) 8(Pilling resistance)	-	3000	-
Cl-6.2 (a) 9(Coating adhesion strength)	-	2000	-
Cl-6.2 (a) 10(Seam slippage)	-	2000	-
Cl-6.2 (a) 11(Resistance to damage by flexing)	-	4000	-
Cl-6.2 (a) 12(Abrasion resistance)	-	3500	-
Cl-6.2 (a) 13(Bursting strength)	-	2000	-
Cl-6.2 (a) 14(Resistance to cold)	-	2500	-
Cl-6.2 (b) 1(Tear strength)	-	1500	-
Cl-6.2 (b) 2(Flexing endurance)	-	3000	-
Cl-6.2 (b) 3(Finish adhesion)	-	2000	-
Cl-6.2 (b) 4(Colour fastness to artificial light)	-	15000	-
Cl-6.2 (b) 5(Colour fastness to rubbing)	-	3500	-
Cl-6.2 (b) 6(Colour fastness to water spotting)	-	1500	-
Cl-6.2 (b) 7(Water vapour permeability)	-	2500	-
Cl-6.2 (b) 8(Colour fastness to water)	-	2000	-
Cl-7.1(general test conditions)	-	0	-
Cl-7.2.1(Top Bed Safety Barriers)	-	500	-
Cl-7.2.2(Top Bed Safety Barriers)	-	500	-
Cl-7.2.3(Top Bed Safety Barriers)	-	500	-
Cl-7.2.4(Top Bed Safety Barriers)	-	500	-
Cl-7.3.1(Gaps)	-	500	-
Cl-7.3.2(Gaps)	-	500	-
Cl-7.4.1(Bed Base)	-	500	-
Cl-7.4.2(Bed Base)	-	500	-
Cl-7.5.1(Attachment, Deflection and Strength of Ladder and Treads)	-	0	-
Cl-7.5.2(Dimensions of Treads)	-	1500	-
Cl-7.6(Strength of Frame and Fastenings)	-	0	-
Cl-7.7(Stability)	-	0	-
Cl-7.8(Fastening of Upper Bed to Lower Bed)	-	2000	-
Cl-10(Marking)	-	0	-
CLAUSE 4(DESIGN AND WORKMANSHIP)	-	0	-
CLAUSE 5(DIMENSIONS)	-	0	-
CLAUSE 6(SURFACE PERFORMANCE)	-	0	-
CLAUSE 6.2(Fabric and Leather (Synthetic and Natural) Performance)	-	0	-
CLAUSE 7.5.1(Attachment, Deflection and Strength of Ladder and Treads)	-	0	-
CLAUSE 7.6(Strength of Frame and Fastenings)	-	0	-
CLAUSE 7.7(Stability Test)	-	0	-
CLAUSE 7.8(Fastening of Upper Bed to Lower Bed)	-	0	-
Cl-5(Dimensions)	-	0	-
Cl-6.1 (a)(Resistance to mechanical damage)	-	0	-
Cl-6.1 (b)(Pencil hardness)	-	0	-
Cl-6.1 (c)(Resistance to wet heat)	-	0	-
Cl-6.1 (d)(Resistance to dry heat)	-	0	-
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	0	-
Cl-6.1 (f)(Resistance to marking by cold oils and fats)	-	0	-
Cl-6.1 (g)(Adhesive performance)	-	0	-
Cl-6.2 (a) 1(Breaking load)	-	0	-
Cl-6.2 (a) 2(Elongation at break)	-	0	-
Cl-6.2 (a) 3(Tear strength)	-	0	-
Cl-6.2 (a) 4(Colour fastness to light)	-	0	-
Cl-6.2 (a) 5(Colour fastness to rubbing)	-	0	-
Cl-6.2 (a) 6(Colour fastness to perspiration)	-	0	-
Cl-6.2 (a) 7(Colour fastness to water)	-	0	-
Cl-6.2 (a) 8(Pilling resistance)	-	0	-
Cl-6.2 (a) 9(Coating adhesion strength)	-	0	-
Cl-6.2 (a) 10(Seam slippage)	-	0	-
Cl-6.2 (a) 11(Resistance to damage by flexing)	-	0	-
Cl-6.2 (a) 12(Abrasion resistance)	-	0	-
Cl-6.2 (a) 13(Bursting strength)	-	0	-
Cl-6.2 (a) 14(Resistance to cold)	-	0	-
Cl-6.2 (b) 1(Tear strength)	-	0	-
Cl-6.2 (b) 2(Flexing endurance)	-	0	-
Cl-6.2 (b) 3(Finish adhesion)	-	0	-
Cl-6.2 (b) 4(Colour fastness to artificial light)	-	0	-
Cl-6.2 (b) 5(Colour fastness to rubbing)	-	0	-
Cl-6.2 (b) 6(Colour fastness to water spotting)	-	0	-
Cl-6.2 (b) 7(Water vapour permeability)	-	0	-
Cl-6.2 (b) 8(Colour fastness to water)	-	0	-
Cl-7.1(general test conditions)	-	0	-
Cl-7.2.1(Top Bed Safety Barriers)	-	0	-
Cl-7.2.2(Top Bed Safety Barriers)	-	0	-
Cl-7.2.3(Top Bed Safety Barriers)	-	0	-
Cl-7.2.4(Top Bed Safety Barriers)	-	0	-
Cl-7.3.1(Gaps)	-	0	-
Cl-7.3.2(Gaps)	-	0	-
Cl-7.4.1(Bed Base)	-	0	-
Cl-7.4.2(Bed Base)	-	0	-
Cl-7.5.1(Attachment, Deflection and Strength of Ladder and Treads)	-	0	-
Cl-7.5.2(Dimensions of Treads)	-	0	-
Cl-7.6(Strength of Frame and Fastenings)	-	0	-
Cl-7.7(Stability)	-	0	-
Cl-7.8(Fastening of Upper Bed to Lower Bed)	-	0	-
Cl-10(Marking)	-	0	-

08 Feb, 2027

-
Included w.e.f.22.09.2025

3347

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 2266 (2024)

STEEL WIRE ROPES FOR GENERAL ENGINEERING PURPOSE - SPECIFICATION (Sixth Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(Minimum breaking force)	-	4500	-
Cl-6(Wire rope)	-	6500	-
Cl-7(Construction)	-	1500	-
Cl-8.1(Fibre Core)	-	2500	-
Cl-8.2(Steel Core)	-	2500	-
Cl-9(Joints)	-	1500	-
Cl-10(Galvanizing)	-	4500	-
Cl-12(Marking)	-	500	-
Cl-4(Rope size and Tolerance)	-	3500	-
Cl-5(Minimum breaking force)	-	0	-
Cl-6(Wire rope)	-	0	-
Cl-7(Construction)	-	0	-
Cl-8.1(Fibre Core)	-	0	-
Cl-8.2(Steel Core)	-	0	-
Cl-9(Joints)	-	0	-
Cl-10(Galvanizing)	-	0	-
Cl-12(Marking)	-	0	-
Cl-4(Rope size and Tolerance)	-	0	-
Cl-5(Minimum breaking force)	-	0	-
Cl-6(Wire rope)	-	0	-
Cl-7(Construction)	-	0	-
Cl-8.1(Fibre Core)	-	0	-
Cl-8.2(Steel Core)	-	0	-
Cl-9(Joints)	-	0	-
Cl-10(Galvanizing)	-	0	-
Cl-12(Marking)	-	0	-
Cl-4(Rope size and Tolerance)	-	0	-

08 Feb, 2027

-
Included w.e.f.22.09.2025

3348

Atckon Laboratories LLP, Bahadurgarh

8186436

IS 2191 : Part 2 (2022)

WOODEN FLUSH DOOR SHUTTERS (CELLULAR, HOLLOW AND TUBULAR CORE TYPE) - SPECIFICATION PART 2 PARTICLE BOARD, HIGH DENSITY FIBRE BOARD, MEDIUM DENSITY FIBRE BOARD AND FIBRE HARDBOARD FACE PANELS (Fourth Revision)

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(Sizes and Tolerances)	-	30000	-
Cl-6.1.(Timber)	-	30000	-
Cl-6.2(Laminated veneer lumber (LVL), veneer laminated lumber (VLL), medium density fibre board (MDF), high density fibre board (HDF))	-	30000	-
Cl-6.3.1(Particle board)	-	30000	-
Cl-6.3.2(MDF board and HDF board)	-	30000	-
Cl-6.3.5(shutters with fibre hardboard face)	-	30000	-
Cl-8.1(Locks)	-	30000	-
Cl-10.1(various test)	-	30000	-
Cl-10.2(End Immersion Test)	-	30000	-
Cl-10.3(Glue Adhesion Test)	-	30000	-
Cl-13(Marking)	-	30000	-
Cl-5(Sizes and Tolerances)	-	30000	-
Cl-6.1.(Timber)	-	30000	-
Cl-6.2(Laminated veneer lumber (LVL), veneer laminated lumber (VLL), medium density fibre board (MDF), high density fibre board (HDF))	-	30000	-
Cl-6.3.1(Particle board)	-	30000	-
Cl-6.3.2(MDF board and HDF board)	-	30000	-
Cl-6.3.5(shutters with fibre hardboard face)	-	30000	-
Cl-8.1(Locks)	-	30000	-
Cl-10.1(various test)	-	30000	-
Cl-10.2(End Immersion Test)	-	30000	-
Cl-10.3(Glue Adhesion Test)	-	30000	-
Cl-13(Marking)	-	30000	-

-
Included w.e.f.08.09.2025

3349

AJEO TESTING LABS PVT LTD, GHAZIABAD

8178606

IS 15961 (2012)

Hot dip aluminium - Zinc alloy metallic coated steel strip and sheet (Plain)

ALL

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(UTM)	-	0	-
Cl 9 & Table 2(Workmanship)	-	0	-
Cl 10(Coating Adhesion )	-	1000	-
Cl 11(Workmanship)	-	0	-
Cl 12(Weight)	-	500	-
Cl 13(Length, Width, Thickness, Camber, Deviation From Squareness & Deviation From Flatness)	-	0	-
Cl 8(UTM)	-	0	-
Cl 10(Coating Adhesion )	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 9 & Table 2(Workmanship)	-	0	-
Cl 12(Weight)	-	0	-
Cl 13(Length, Width, Thickness, Camber, Deviation From Squareness & Deviation From Flatness)	-	0	-
Cl 8(UTM)	-	0	-
Cl 9 & Table 2(Workmanship)	-	0	-
Cl 10(Coating Adhesion )	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 12(Weight)	-	0	-
Cl 13(Length, Width, Thickness, Camber, Deviation From Squareness & Deviation From Flatness)	-	0	-
Cl. 13.7(Deviation from Flatness (Steepness))	-	200	-
Cl. 13.6(Deviation from Squareness (Out of Square))	-	200	-
Cl. 13.5(Camber)	-	200	-
Cl. 13.4(Thickness)	-	200	-
Cl. 13.3(Width)	-	200	-
4, 5(CARBON)	-	200	-
4, 5(SULPHUR)	-	200	-
4, 5(PHOSPHURS)	-	200	-
4.5(MANGANESE)	-	200	-
4, 5(NITROGEN)	-	200	-
4, 5(SILICON)	-	200	-
4, 5(ALUMINIUM)	-	200	-
Cl 13(Length, Width, Thickness, Camber, Deviation From Squareness & Deviation From Flatness)	-	0	-
Cl 12(Weight)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 10(Coating Adhesion )	-	0	-
Cl 9 & Table 2(Workmanship)	-	0	-
Cl 8(UTM)	-	0	-
Cl 8(UTM)	-	0	-
Cl 9 & Table 2(Workmanship)	-	0	-
Cl 10(Coating Adhesion)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 12(Weight)	-	0	-
Cl 13(Length, Width, Thickness, Camber, Deviation From Squareness & Deviation From Flatness)	-	0	-
Clause 3.5(IS 15961)	-	0	-
Clause 8, Table 1(IS 1608 Part 1)	-	0	-
Clause 8, Table 1(IS 1608 Part 1)	-	0	-
Clause 8, Table 1(IS 1608 Part 1)	-	0	-
Clause 9(IS 15961)	-	0	-
Clause 9(IS 15961)	-	0	-
Clause 9(IS 15961)	-	0	-
Clause 9.7(IS 15961)	-	0	-
Clause 11(IS 15961)	-	0	-
Clause 12(IS 15961)	-	0	-
Clause 13.1(IS 15961)	-	0	-
Clause 13.2(IS 15961)	-	0	-
Clause 7.1(Any Instrumental Method/Chemical Method)	-	0	-
Clause 7.1(Any Instrumental Method/Chemical Method)	-	0	-
Clause 7.1(Any Instrumental Method/Chemical Method)	-	0	-
Clause 7.1(Any Instrumental Method/Chemical Method)	-	0	-
Clause 7.1(Any Instrumental Method/Chemical Method)	-	0	-
Clause 7.1(Any Instrumental Method/Chemical Method)	-	0	-
Clause 7.1(Any Instrumental Method/Chemical Method)	-	0	-
Clause 7.1(Any Instrumental Method/Chemical Method)	-	0	-
Clause 7.1(By Calculation)	-	0	-
7.1(Chemical composition %, IS 513)	-	0	-
8.0 (Table No.- 1)(Tensile Test MPa(T.S., Y.S. & El) - IS 1608)	-	0	-
9.0 (Table No.- 2)(Coating test, g/m2)	-	1000	-
10.0 (Table No.-3)(Coating adhesion test)	-	0	-
11(Freedom from defects)	-	500	-
12(Mass, kg)	-	500	-
13(Dimensions, Shape and Tolerances,mm-IS/ISO 16163)	-	0	-
7.1(Chemical composition %, IS 513)	-	0	-
8.0 (Table No.- 1)(Tensile Test MPa(T.S., Y.S. & El) - IS 1608)	-	0	-
9.0 (Table No.- 2)(Coating test, g/m2)	-	0	-
10.0 (Table No.-3)(Coating adhesion test)	-	0	-
11(Freedom from defects)	-	0	-
12(Mass, kg)	-	0	-
13(Dimensions, Shape and Tolerances,mm-IS/ISO 16163)	-	0	-
7.1(Chemical composition %, IS 513)	-	0	-
8.0 (Table No.- 1)(Tensile Test MPa(T.S., Y.S. & El) - IS 1608)	-	0	-
9.0 (Table No.- 2)(Coating test, g/m2)	-	0	-
10.0 (Table No.-3)(Coating adhesion test)	-	0	-
11(Freedom from defects)	-	0	-
12(Mass, kg)	-	0	-
13(Dimensions, Shape and Tolerances,mm-IS/ISO 16163)	-	0	-
Clause 3.5(Surface Finish)	-	0	-
Clause 8, Table 1(Tensile Strength)	-	500	-
Clause 8, Table 1(Yield Strength)	-	500	-
Clause 8, Table 1(Elongation)	-	500	-
Clause 9(Coating Test (Triple Spot Test) (Total Both Surface))	-	0	-
Clause 9(Coating Test (Triple Spot Test) (Total Both Surface))	-	0	-
Clause 9(Coating Test (Single Spot Test) (Total Both Surface))	-	0	-
Clause 9(Coating Test (Single Spot Test) (One Surface))	-	0	-
Clause 9.7(Differential Coating)	-	0	-
Clause 11(Freedom from Defect)	-	0	-
Clause 12(Mass)	-	0	-
Clause 13.1(Coil Internal Diameter)	-	200	-
Clause 13.2(Length Tolerance)	-	200	-
Clause 7.1(Chromium)	-	0	-
Clause 7.1(Nickel)	-	0	-
Clause 7.1(Niobium)	-	0	-
Clause 7.1(Vanadium)	-	0	-
Clause 7.1(Titanium)	-	0	-
Clause 7.1(Molybdenum)	-	0	-
Clause 7.1(Boron)	-	0	-
Clause 7.1(Calcium)	-	0	-
Clause 7.1(Chromium + Nickel + Niobium, Vanadium + Titanium + Molybdenum + Boron + Calcium)	-	0	-
Cl-13.2(Length Tolerance)	-	0	-
Cl-13.3(Width Tolerance)	-	0	-
Cl-13.4(Thickness Tolerance)	-	0	-

-
included w.e.f 05.01.2026

3350

ACCURATE TEST SOLUTIONS LLP

8192806

IS 12701 (1996)

Rotational moulded polyethylene water storage tanks - specification (First Revision)

200L - 20000L

19000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.3(Carbon Black Content )	-	1000	-
4.2.3(Carbon Dispersion Test)	-	1000	-
5(Types and Features )	-	500	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	1000	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	1000	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	1000	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	1000	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	1000	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	1000	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	1000	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	1000	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	1000	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	1000	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	1000	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	1000	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	1000	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	1000	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	1000	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	1000	-
5.3(Types and Features )	-	500	-
5.6(Types and Features )	-	500	-
6.1(Finish)	-	500	-
7.1.1(Resistance to Deformation)	-	1000	-
7.1.2(Resistance to Deformation)	-	1000	-
7.2(Resistance to Impact)	-	1500	-
7.3(Test for Top Load Resistance)	-	1500	-
7.4(Tensile Strength)	-	2000	-
7.5(Flexural Modulus)	-	2000	-
7.6(overall Migration)	-	2000	-
9.2.1(Man-Hole and Hand-Hole Lids)	-	1000	-
9.2(Man-Hole and Hand-Hole Lids)	-	1000	-
9.1(Man-Hole and Hand-Hole Lids)	-	1000	-
9.1(Lid Thickness)	-	1000	-
7.3(Test for Top Load Resistance)	-	1500	-
6.1(Finish)	-	500	-
5.4(Wall Thickness above effective height)	-	1000	-
5.2 Table 2 (7)(Minimum Wall Thickness)	-	1000	-
5.1 Table 1 (7)(Minimum Weight of Tank (Without Lid))	-	2000	-
4.2.1(Density)	-	2000	-
4.2.2(MFI)	-	2000	-
7.6(overall Migration)	-	2000	-
4.1(MATERIALS)	-	2000	-
4.2.2(MFR)	-	2000	-
4.2.1(Density)	-	2000	-
5.4(Wall Thickness)	-	1000	-
10(MARKING)	-	500	-
Cl-7.6(Overall Migration)	-	1500	-

08 Dec, 2028

-
Scope restriction for capacity up-to 5000 litre

3351

Standard Testing and Compliance Private Limited

6178726

IS 16103 : Part 1 (2012)

Led modules for general lighting: Part 1 safety requirements

37500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	2500	-
8(Terminals)	-	2500	-
9(PROVISION FOR EARTHING)	-	2500	-
10(Protection against accidental contact with live parts)	-	3000	-
11(Mositure Resistance and Insulation)	-	5000	-
12(Electric Strength)	-	2500	-
13(Fault conditions)	-	2500	-
15(Construction)	-	2500	-
16(Creepage distance and clearances)	-	2500	-
17(Screws, current carrying parts and connections)	-	2500	-
18(Resistance to heat, fire and tracking)	-	5000	-
19(Resistance to corrosion)	-	2500	-
21(Heat management)	-	2000	-

10 Jul, 2027

-
Included w.e.f 10.10.2025

3352

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 17632 (2022)

General Purpose Chairs and Stools - Specification

77500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CLAUSE 5(DIMENSIONS)	-	3000	-
CLAUSE 6(SURFACE PERFORMANCE)	-	0	-
CLAUSE 6.2(Fabric and Leather (Synthetic and Natural) Performance)	-	0	-
CLAUSE 7.2.1(Forwards Overbalancing and Sideways Overbalancing for Chairs without Arms)	-	5000	-
CLAUSE 7.2.2(Rearwards Overbalancing)	-	6000	-
CLAUSE 7.2.3(Sideways Overbalancing for Chairs with Arms)	-	7000	-
CLAUSE 7.2.4(Sideways Overbalancing for Chairs with Arms)	-	5500	-
CLAUSE 7.3.1.1(Seat static load test)	-	5000	-
CLAUSE 7.3.1.2(Back static load test)	-	5000	-
CLAUSE 7.3.1.3(Armrests/Wings sideways static load test)	-	5000	-
CLAUSE 7.3.1.4(Arm downwards static load test)	-	4500	-
CLAUSE 7.3.1.5(Leg forward static load test)	-	5500	-
CLAUSE 7.3.1.6(Leg sideways static load test)	-	5500	-
CLAUSE 7.3.1.7(Diagonal base load test)	-	3500	-
CLAUSE 7.3.1.8(Foot rest static-load test)	-	4000	-
CLAUSE 7.3.2.1(Seat impact test)	-	4500	-
CLAUSE 7.3.2.2(Back impact test)	-	4500	-
CLAUSE 7.3.2.3(Arm impact test)	-	6000	-
CLAUSE 7.3.2.4(Drop test)	-	5000	-
CLAUSE 7.4.1(Seat Fatigue Test)	-	7000	-
CLAUSE 7.4.2(Back Fatigue Test)	-	6000	-
CLAUSE 7.4.3(Arm Rest Durability Test)	-	15000	-
Cl - 5(DIMENSIONS)	-	0	-
Cl-6.1 (a)(Resistance to mechanical damage)	-	1500	-
Cl-6.1 (b)(Pencil hardness)	-	1000	-
Cl-6.1 (c)(Resistance to wet heat)	-	1000	-
Cl-6.1 (d)(Resistance to dry heat)	-	1500	-
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	1500	-
Cl-6.1 (f)(Resistance to marking by cold oils and fats)	-	1500	-
Cl-6.1 (g)(Adhesive performance)	-	1500	-
Cl-6.2 (a) 1(Breaking load)	-	1000	-
Cl-6.2 (a) 2(Elongation at break)	-	1000	-
Cl-6.2 (a) 3(Tear strength)	-	1500	-
Cl-6.2 (a) 4(Colour fastness to light)	-	1500	-
Cl-6.2 (a) 5(Colour fastness to rubbing)	-	1500	-
Cl-6.2 (a) 6(Colour fastness to perspiration)	-	2000	-
Cl-6.2 (a) 7(Colour fastness to water)	-	2000	-
Cl-6.2 (a) 8(Pilling resistance)	-	1000	-
Cl-6.2 (a) 9(Coating adhesion strength)	-	500	-
Cl-6.2 (a) 10(Seam slippage)	-	1500	-
Cl-6.2 (a) 11(Resistance to damage by flexing)	-	1000	-
Cl-6.2 (a) 12(Abrasion resistance)	-	1500	-
Cl-6.2 (a) 13(Bursting strength)	-	1000	-
Cl-6.2 (a) 14(Resistance to cold)	-	1500	-
Cl-6.2 (b) 1(Tear strength)	-	1000	-
Cl-6.2 (b) 2(Flexing endurance)	-	1000	-
Cl-6.2 (b) 3(Finish adhesion)	-	1000	-
Cl-6.2 (b) 4(Colour fastness to artificial light)	-	1500	-
Cl-6.2 (b) 5(Colour fastness to rubbing)	-	1000	-
Cl-6.2 (b) 6(Colour fastness to water spotting)	-	1500	-
Cl-6.2 (b) 7(Water vapour permeability)	-	1000	-
Cl-6.2 (b) 8(Colour fastness to water)	-	1000	-
Cl-7.2.1(Forwards Overbalancing and Sideways Overbalancing for Chairs without Arms)	-	10000	-
Cl-7.2.2(Rearwards Overbalancing)	-	5500	-
Cl-7.2.3(Sideways Overbalancing for Chairs with Arms)	-	0	-
Cl-7.2.4(Stools/ Poufs (All Directions))	-	0	-
Cl-7.3.1(Static Load Test)	-	0	-
Cl-7.3.2(Impact Test)	-	0	-
Cl-7.4.1(Seat Fatigue Test)	-	0	-
Cl-7.4.2(Back Fatigue Test)	-	0	-
Cl-7.4.3(Arm Rest Durability)	-	0	-
Cl-9(Marking)	-	0	-
7.1(General test conditions)	-	0	-

08 Feb, 2027

-
Included w.e.f.22.09.2025

3353

Atckon Laboratories LLP, Bahadurgarh

8186436

IS 4990 (2024)

PLYWOOD FOR CONCRETE SHUTTERING WORKS SPECIFICATION (Fourth Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Timber)	-	25000	-
Cl-5.2(Adhesives for Bonding of Veneers)	-	25000	-
Cl-6.1(Manufacture)	-	25000	-
Cl-6.2(Manufacture ( Thickness of veneers))	-	25000	-
Cl-6.3(Manufacture ( Physical and mechanical properties of veneers))	-	25000	-
Cl-6.4, 6.7(Manufacture (Plywood for concrete shuttering))	-	25000	-
Cl-6.5(Manufacture (Scarf joints))	-	25000	-
Cl-6.6(Manufacture ( Preservative treatment))	-	25000	-
Cl-7.1(Dimensions -length)	-	25000	-
Cl-7.2(Thickness)	-	25000	-
Cl-7.3(Squareness)	-	25000	-
Cl-8.1, 8.2(Workmanship and finish)	-	25000	-
Cl-10.3(Moisture Content)	-	25000	-
Cl-10.4.1(Glue Adhesion in Dry State - Glue Shear Strength-WOOD FAILURE, Average)	-	25000	-
Cl-10.4.2(Glue Adhesion in Dry State - Adhesion of Plies)	-	25000	-
Cl-10.5, 10.5.1(Resistance to water test- glue shear strength- WOOD Failure, Average)	-	25000	-
Cl-10.5.1.1(Water Resistance Test-Glue shear strength)	-	25000	-
Cl-10.5.1.2(Water Resistance Test-Adhesion of plies)	-	25000	-
Cl-10.5.2(Water Resistance Test (Alternate method))	-	25000	-
Cl-10.6(Water resistance test (Concrete shuttering Plywood))	-	25000	-
Cl-10.7.1, Table-2(Mycological Test- Glue shear strengt)	-	25000	-
Cl-10.7.2(Mycological Test- Adhesion of plies)	-	25000	-
Cl-10.8(Tensile Strength)	-	25000	-
Cl-10.9, Table-3 (i)(Along (parallel to the grain direction of the face veneer))	-	25000	-
Cl-10.9, Table-3 (ii)(Across (perpendicular to the grain direction of the face veneer))	-	25000	-
Cl-10.10, Table-4 (i) a((Modulus of Elasticity: Across the Face Grain: Average) Wet Bending)	-	25000	-
Cl-10.10, Table-4 (i) b((Modulus of Rupture: Across the Face Grain: Minimum Individual) Wet Bending)	-	25000	-
Cl-10.11(Retention of Preservative)	-	25000	-
Cl-10.12(Formaldehyde Content Test)	-	25000	-
Cl-10.13(Steady-State Formaldehyde Emission Test)	-	25000	-
Cl-10.10, Table-4 (ii) a(Wet Bending Strength:- Modulus of Rupture: Across the Face Grain: Average))	-	25000	-
Cl-10.10, Table-4, (ii) b(Wet Bending Strength; (Modulus of Rupture: Along the Face Grain: Minimum Individual))	-	25000	-
Cl-10.4.1, 10.5.1.1 and 10.7.1, Table-2(Average Wood Failure)	-	25000	-
Cl-10.4.1, 10.5.1.1 and 10.7.1, Table-2(Average Failure Load, N -Dry State)	-	25000	-
Cl-10.4.1, 10.5.1.1 and 10.7.1, Table-2(Average Failure Load, N- Resistance to Water)	-	25000	-
Cl-10.4.1, 10.5.1.1 and 10.7.1, Table-2(Average Failure Load, N - Resistance to Micro-Organisms)	-	25000	-
Cl-10.8 (a)(Tensile strength)	-	25000	-
Cl-10.8 (b)(Tensile strength)	-	25000	-
Cl-10.8 (c)(Tensile strengths in both directions)	-	25000	-
Cl-7.1(Dimensions (width))	-	25000	-
Cl-7.3(Edge Straightness)	-	25000	-

-
Included w.e.f.08.09.2025

3354

Atckon Laboratories LLP, Bahadurgarh

8186436

IS 2202 : Part 2 (2022)

WOODEN FLUSH DOOR SHUTTERS SOLID CORE TYPE SPECIFICATION PART 2 PARTICLE BOARD HIGH DENSITY FIBRE BOARD MEDIUM DENSITY FIBRE BOARD AND HARDBOARD FACE PANELS Fourth Revision

28000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No - 6.1(Timber)	-	28000	-
Clause No -6.2(Alternative Materials (LVL)	-	28000	-
Clause No -6.2(Alternative Materials veneer laminated lumber (VLL))	-	28000	-
Clause No -6.2(Alternative Materials medium density fibre board (MDF))	-	28000	-
Clause No -6.2(Alternative Materials -plywood)	-	28000	-
Clause No -6.2(BWP grade flush door shutter)	-	28000	-
Clause No -6.3.1("Face Panels: Particle Board MDF/ HDF Fibre Hardboard")	-	28000	-
Clause No -6.4(Adhesive)	-	28000	-
Clause No -7.1(Construction)	-	28000	-
Clause No - 7.3(" MDF board or HDF board ")	-	28000	-
Clause No -9.2("Workmanship and finish")	-	28000	-
Clause No -10.1(tests for flush door shutters)	-	28000	-
Clause No -10.2(End Immersion Test)	-	27999.96	-
Clause No -10.3(Glue Adhesion Test)	-	28000	-
Clause No -11(SAMPLING AND CRITERIA FOR CONFORMITY)	-	28000	-
Clause No -12("ADDITIONAL REQUIREMENTS FOR ECO MARK")	-	28000	-
5(SIZES AND TOLERANCES)	-	28000	-
6.5(The swelling in thickness of the particle board, MDF and HDF board for core)	-	28000	-
Cl-6.3.3 (Amendment NO 1)(B D P V, P D P V and M D P V types of flush door)	-	28000	-
Cl-6.3.2(MDF board and HDF board)	-	28000	-
Cl-6.3.4(B N P V, P N P V and M N P V,)	-	28000	-
Cl-7.2(Face Panel)	-	28000	-
Cl-7.4 (Amendment No 1)(Door Blanks)	-	28000	-
Cl-8(Fittings)	-	28000	-
Clause No - 6.1(Timber)	-	27999.99	-
Clause No -6.2(Alternative Materials (LVL)	-	27999.98	-
Clause No -6.2(Alternative Materials veneer laminated lumber (VLL))	-	27999.98	-
Clause No -6.2(Alternative Materials medium density fibre board (MDF))	-	27999.97	-
Clause No -6.2(Alternative Materials -plywood)	-	27999.99	-
Clause No -6.2(BWP grade flush door shutter)	-	27999.98	-
Clause No -6.3.1("Face Panels: Particle Board MDF/ HDF Fibre Hardboard")	-	27999.98	-
Clause No -6.4(Adhesive)	-	27999.97	-
Clause No -7.1(Construction)	-	27999.98	-
Clause No - 7.3(" MDF board or HDF board ")	-	28000	-
Clause No -9.2("Workmanship and finish")	-	27999.99	-
Clause No -10.1(tests for flush door shutters)	-	27999.99	-
Clause No -10.2(End Immersion Test)	-	27999.99	-
Clause No -10.3(Glue Adhesion Test)	-	27999.98	-
Clause No -11(SAMPLING AND CRITERIA FOR CONFORMITY)	-	27999.97	-
Clause No -12("ADDITIONAL REQUIREMENTS FOR ECO MARK")	-	28000.03	-
5(SIZES AND TOLERANCES)	-	27999.98	-
6.5(The swelling in thickness of the particle board, MDF and HDF board for core)	-	27999.98	-
Cl-6.3.3 (Amendment NO 1)(B D P V, P D P V and M D P V types of flush door)	-	27999.98	-
Cl-6.3.2(MDF board and HDF board)	-	27999.98	-
Cl-6.3.4(B N P V, P N P V and M N P V,)	-	27999.96	-
Cl-7.2(Face Panel)	-	28000.02	-
Cl-7.4 (Amendment No 1)(Door Blanks)	-	27999.97	-
Cl-8(Fittings)	-	28000	-
Clause No - 6.1(Timber)	-	28000	-
Clause No -6.2(Alternative Materials (LVL)	-	28000	-
Clause No -6.2(Alternative Materials veneer laminated lumber (VLL))	-	28000	-
Clause No -6.2(Alternative Materials medium density fibre board (MDF))	-	28000	-
Clause No -6.2(Alternative Materials -plywood)	-	28000	-
Clause No -6.2(BWP grade flush door shutter)	-	28000	-
Clause No -6.3.1("Face Panels: Particle Board MDF/ HDF Fibre Hardboard")	-	28000	-
Clause No -6.4(Adhesive)	-	28000	-
Clause No -7.1(Construction)	-	28000	-
Clause No - 7.3(" MDF board or HDF board ")	-	28000	-
Clause No -9.2("Workmanship and finish")	-	28000	-
Clause No -10.1(tests for flush door shutters)	-	28000	-
Clause No -10.2(End Immersion Test)	-	28000	-
Clause No -10.3(Glue Adhesion Test)	-	28000	-
Clause No -11(SAMPLING AND CRITERIA FOR CONFORMITY)	-	28000	-
Clause No -12("ADDITIONAL REQUIREMENTS FOR ECO MARK")	-	28000	-
5(SIZES AND TOLERANCES)	-	28000	-
6.5(The swelling in thickness of the particle board, MDF and HDF board for core)	-	28000	-
Cl-6.3.3 (Amendment NO 1)(B D P V, P D P V and M D P V types of flush door)	-	28000	-
Cl-6.3.2(MDF board and HDF board)	-	28000	-
Cl-6.3.4(B N P V, P N P V and M N P V,)	-	28000	-
Cl-7.2(Face Panel)	-	28000	-
Cl-7.4 (Amendment No 1)(Door Blanks)	-	28000	-
Cl-8(Fittings)	-	28000	-

-
Included w.e.f.08.09.2025

3355

Northern India Textile Research Association (NITRA), Ghaziabad

8163504

IS 16890 (2024)

Textiles — Protective Clothing for Firefighters — Specification

111400 View breakup
-

Clause No.	Exclusion	Remark
Cl-5.1(General)	-	-
Cl-5.2.1(Configuration)	-	-
Cl-5.2.2(Restriction of Movement)	-	-
Cl-5.2.3(Multilayer Clothing Assemblies)	-	-
Cl-5.2.4(Seams)	-	-
Cl-5.2.5(Hardware)	-	-
Cl-5.2.6(Closure Systems)	-	-
Cl-5.2.7(Retroreflective Elements)	-	-
Cl-5.2.8(Sleeve Ends)	-	-
Cl-5.2.9(Clothing Mass)	-	-
Cl-5.2.11(Labels)	-	-
Cl-5.2.12(Size Designations)	-	-
Cl-7.2(Flame Resistance)	-	-
Cl-7.3(Heat Transfer (Flame Exposure))	-	-
Cl-7.4(Heat Transfer (Radiant Exposure))	-	-
Cl-7.5(Contact Heat)	-	-
Cl-7.6(Residual Strength of Material when Exposed to Radiant Heat)	-	-
Cl-7.7(Heat Resistance)	-	-
Cl-7.8(Tensile Strength)	-	-
Cl-7.8(Tensile Strength)	-	-
Cl-7.9(Tear Strength)	-	-
Cl-7.10(Cleaning-Shrinkage Resistance)	-	-
Cl-7.11(Liquid-Chemical Penetration Resistance)	-	-
Cl-7.12(Water-penetration Resistance)	-	-
Cl-7.13(Water-vapour Resistance)	-	-
Cl-8(Marking)	-	-
Cl-5.2.10(Ease of Cleaning)	-	-

-
Included w.e.f 11.09.2025

3356

Stellar Test House, Noida

8171606

IS 13759 (2017)

Polyurethane primer, zinc phosphate (Two - Pack) for exterior painting of railway coaches - Specification (First Revision)

All types and Grade

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause-4.3 & 7.1 Table-1 S.No-1 (v)(Colour)	-	1500	-
Clause-4.3 & 7.1 Table-1 S.No-1 (vii)(Volume solids percent, Min)	-	1500	-
Clause-4.3 & 7.1 Table-1 S.No-1 (ix)(Flash point, base and hardner each)	-	1000	-
Clause-4.3 & 7.1 Table-1 S.No-1 (x), a)(Resistance to humidity)	-	1000	-
Clause-4.3 & 7.1 Table-1 S.No-1 (x), b)(Resistance to salt spray expose for 500 h)	-	1000	-
Clause-4.2.1(Compounds of lead)	-	1500	-
Clause-4.3 & 7.1 Table-1 S.No-1 (i)(Consistency)	-	500	-
Clause-4.3 & 7.1 Table-1 S.No-1 (ii)(Viscosity by ford cup)	-	1000	-
Clause-4.3 & 7.1 Table-1 S.No-1 (iii)(Drying time, h, Max)	-	1500	-
Clause-4.3 & 7.1 Table-1 S.No-1 (iv)(Finish)	-	500	-
Clause-4.3 & 7.1 Table-1 S.No-1 (vi)(Dry film thickness, Min)	-	1000	-
Clause-4.3 & 7.1 Table-1 S.No-1 (viii), a)(Scratch hardness (Load 1 500 g))	-	1500	-
Clause-4.3 & 7.1 Table-1 S.No-1 (viii), b)(Bend test with 6.25 mm dia mandrel in type 1 apparatus )	-	1500	-
Clause-4.3 & 7.1 Table-2 S.No-1 (i)(Fineness of grind, Max)	-	1000	-
Clause-4.3 & 7.1 Table-2 S.No-1 (ii)(Pot life, h, Min)	-	1000	-
Clause-4.3 & 7.1 Table-2 S.No-1 (iii)(Mass, kg/10 litres, Min)	-	500	-
Clause-4.3 & 7.1 Table-2 S.No-1 (iv)(Keeping properties)	-	1000	-
Clause-5(Packing and Marking )	-	500	-
Clause-4.1 (Composition)	-	1500	-

26 Sep, 2028

-
Included w.e.f 14.10.2025

3357

ACCURATE TEST SOLUTIONS LLP

8192806

IS 4985 (2021)

UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision

CLASS-1TO 6, TYPE-A, TYPE B

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1(Colour)	-	500	-
10.1(Surface Finish)	-	500	-
7.2.1.1 Table3(Angle of taper (Note-1))	-	500	-
10.7(Sulphated Ash Content)	-	1500	-
5(CLASSIFICATION OF PIPES)	-	500	-
Cl-7.1(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6))	-	500	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	500	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	500	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation)	-	500	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	500	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	500	-
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	500	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	500	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	500	-
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	500	-
Cl- 7.2(Socket length (Take 4 reading & minimum will be reported))	-	500	-
7.2.1(DIMENSIONS-Socket)	-	500	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	500	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	500	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-	500	-
7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-	500	-
7.2.1.2-Table 4(DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter)	-	500	-
8(SEALING RINGS)	-	1000	-
9.1(PIPE ENDS)	-	500	-
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	500	-
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	500	-
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	1000	-
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	1500	-
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	2000	-
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	2000	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	5000	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	3000	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	5000	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	3000	-
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	3000	-
11.2(Resistance to External Blows at 0°C)	-	1500	-
10.3(Effect on Water Test)	-	2000	-
6.1.2(PVC Resin)	-	3000	-
7.1.3(mean outside diameter, outside diameter at any point, and wall thickness of plumbing pipes)	-	500	-
7.1.4(Length)	-	500	-
7.2.1.2b(Maximum inner diameter of groove)	-	500	-
13.1(Marking)	-	500	-
cL-13.1.1(Marking)	-	500	-
Cl-13.1.2(Marking)	-	500	-
Cl-10.3 (i)(Effect on Lead (first extraction))	-	2000	-
Cl-10.3 (ii)(Effect on Lead (third extraction))	-	2000	-
Cl-10.3 (iii)(Effect on Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	2000	-
Cl-10.3 (iv)(Effect on Cadmium)	-	2000	-
Cl-10.3 (v)(Effect on Mercury)	-	2000	-
Cl-10.3 (vi)(Other toxic substances such as ‘di-n-octyl-tin- mass) s-s bis iso-octyl mercapto acetate’ and ‘butyl stearate)	-	2000	-

08 Dec, 2028

-
Cl 6.1.1 (VCM Content)

3358

BIS, Central Laboratory (CL)

None

IS 1285 (2023)

WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS EXTRUDED ROUND TUBE AND HOLLOW SECTIONS FOR GENERAL ENGINEERINGPURPOSES SPECIFICATION

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
10 (MECHANICAL PROPERTIES)	-
Cl.9.1 (Aluminium- IS 504 and its parts or any other intrumental/chemical methods)	-
Cl.9.1 (Copper- IS 504 and its parts or any other intrumental/chemical methods)	-
Cl.9.1 (Magnesium- IS 504 and its parts or any other intrumental/chemical methods)	-
Cl.9.1 (Silicon- IS 504 and its parts or any other intrumental/chemical methods)	-
Cl.9.1 (Iron- IS 504 and its parts or any other intrumental/chemical methods)	-
Cl.9.1 (Manganese- IS 504 and its parts or any other intrumental/chemical methods)	-
Cl.9.1 (Zinc- IS 504 and its parts or any other intrumental/chemical methods)	-
Cl.9.1 (Titanium and/ or other grain refining elements- IS 504 and its parts or any other intrumental/chemical methods)	-
Cl.9.1 (Chromium- IS 504 and its parts or any other intrumental/chemical methods)	-
Cl.9.1 (Remarks (Cr+Mn) - IS 504 and its parts or any other intrumental/chemical methods)	-

-
-

3359

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 17631 (2022)

Work Chairs - Specification

79000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
clause 4(DESIGN AND WORKMANSHIP)	-	4500	-
clause 5(DIMENSIONS)	-	2500	-
Cl-6.1 (a)(Resistance to mechanical damage)	-	1000	-
Cl-6.2 (a) (1)(For Fabric and Synthetic Leather:- Breaking load)	-	1500	-
Cl-7.3.1(Front Edge Overturning)	-	5500	-
Cl-7.3.2(Forwards Overturning)	-	5000	-
Cl-7.3.3(Forwards Overturning for Chairs with Foot Rest)	-	5500	-
Cl-7.3.4(Sideways Overturning for Chairs Without Arm Rests)	-	8000	-
Cl-6.1 (b)(Pencil hardness)	-	1000	-
Cl-6.1 (c)(Resistance to wet heat;)	-	1000	-
Cl-6.1 (d)(Resistance to dry heat;)	-	1500	-
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	1500	-
Cl-6.1 (f)(Resistance to marking by cold oils and fats;)	-	1500	-
Cl-6.1 (g)(Adhesive performance)	-	1500	-
Cl-6.2 (a) (2)(For Fabric and Synthetic Leather:- Elongation at break)	-	1000	-
Cl-6.2 (a) (3)(For Fabric and Synthetic Leather:- Tear strength)	-	500	-
Cl-6.2 (a) (4)(For Fabric and Synthetic Leather:- Colour fastness to light)	-	1500	-
Cl-6.2 (a) (5)(For Fabric and Synthetic Leather:- Colour fastness to rubbing)	-	1500	-
Cl-6.2 (a) (6)(For Fabric and Synthetic Leather:- Colour fastness to perspiration)	-	2000	-
Cl-6.2 (a) (7)(For Fabric and Synthetic Leather:- Colour fastness to water)	-	2000	-
Cl-6.2 (a) (8)(For Fabric and Synthetic Leather:- Pilling resistance)	-	1000	-
Cl-6.2 (a) (9)(For Fabric and Synthetic Leather:- Coating adhesion strength)	-	500	-
Cl-6.2 (a) (10)(For Fabric and Synthetic Leather:- Seam slippage)	-	1000	-
Cl-6.2 (a) (11)(For Fabric and Synthetic Leather:- Resistance to damage by flexing)	-	1000	-
Cl-6.2 (a) (12)(For Fabric and Synthetic Leather:- Abrasion resistance)	-	1500	-
Cl-6.2 (a) (13)(For Fabric and Synthetic Leather:- Bursting strength)	-	1000	-
Cl-6.2 (a) (14)(For Fabric and Synthetic Leather:- Resistance to cold)	-	1000	-
Cl-6.2 (b) (2)(For Natural Leather:- Flexing endurance)	-	1500	-
Cl-6.2 (b) (1)(For Natural Leather:- Tear strength)	-	1000	-
Cl-6.2 (b) (3)(For Natural Leather: Finish adhesion)	-	1000	-
Cl-6.2 (b) (4)(For Natural Leather: Colour fastness to artificial light)	-	1500	-
Cl-6.2 (b) (5)(For Natural Leather: Colour fastness to rubbing)	-	1000	-
Cl-6.2 (b) (6)(For Natural Leather: Colour fastness to water spotting)	-	1500	-
Cl-6.2 (b) (7)(For Natural Leather: Water vapour permeability)	-	1000	-
Cl-6.2 (b) (8)(For Natural Leather: Colour fastness to water)	-	1000	-
Cl-7.3.5(Sideways Overturning for Chairs With Arm Rests)	-	4500	-
Cl-7.3.6(Rearwards Overturning for Chairs Without Back Rest Inclination)	-	1500	-
Cl-7.3.7(Rearwards Overturning for Chairs with Backrest Inclination)	-	1500	-
Cl-7.4.1(Seat Front Edge Static Load Test)	-	1500	-
Cl-7.4.2(Combined Seat and Back Static Load Test)	-	2000	-
Cl-7.4.3(Arm Rest Downward Static Load Test — Central)	-	2000	-
Cl-7.4.4(Arm Rest Downward Static Load Test — Front)	-	1500	-
Cl-7.4.5(Arm Rest Sideways Static Load Test)	-	2500	-
Cl-7.4.6(Foot Rest Static Load Test)	-	2000	-
Cl-7.5.1(Seat and Back Durability)	-	21000	-
Cl-7.5.2(Arm Rest Durability)	-	20000	-
Cl-7.5.3(Swivel Test)	-	18000	-
Cl-7.5.4(Foot-rest Durability)	-	15000	-
Cl-7.5.5(Castor and Chair-Base Durability)	-	18000	-

08 Feb, 2027

-
Included w.e.f.22.09.2025

3360

EMC Testing and Compliance LLP, Gurugram

8141526

IS 16709 (2017)

Textiles - Polypropylene (PP) woven, laminated, block bottom valve sacks for packaging of 50 kg cement - Specification

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(Sack Length)	-	500	-
4.1.2(Sack Width)	-	500	-
4.1.3(Top Closure Width and Bottom Closure Width)	-	500	-
4.1.4(Patch Length)	-	500	-
4.1.5(Patch Height)	-	500	-
4.1.6(Length of Valve)	-	500	-
4.1.7(Width of Valve Sleeve)	-	500	-
4.1.8(Length of Valve Sleeve)	-	500	-
5.1(Raw Material)	-	3000	-
5.2(Fabric)	-	500	-
5.2(Tape density and width)	-	1500	-
5.4(Lamination for PP)	-	2500	-
5.4(Lamination for LDPE)	-	2500	-
6.1(Mass of Bale)	-	500	-
6.2.1(Breaking Strength and Elongation at Break of Fabric)	-	3000	-
6.2.2(Weld Strength of Top and Bottom Closures)	-	3000	-
6.3(Drop Impact Testing of Filled Sacks)	-	3000	-
6.4(Ash Content)	-	1500	-
6.5(Air Permeability)	-	3500	-
8(Atomspheric Conditions for Conditioning and Testing)	-	500	-
Cl-5.6(Capacity)	-	500	-
Cl- 6.6, Table.-1 (ii)(Ends per dm)	-	500	-
Cl-6.6, Table-1 (iii)(Picks per dm)	-	500	-
Cl.6.6, Table-1 (vii)(Elongation at break of fabric)	-	500	-

19 Jul, 2027

-
Included w.e.f 22.09.2025

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number