BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

14050 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

3391

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 8699 (1977)

Specification for pvc coated fabrics for footwear industry

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1.1 and 4.1, Table - 1 (ii)(Total Mass)	-	200	-
3.1.1 and 4.1, Table - 1 (iii)(Breaking Strength Warp direction)	-	1000	-
3.1.1 and 4.1, Table - 1 (iii)(Breaking Strength Weft direction)	-	1000	-
3.1.1 and 4.1, Table - 1 (iv)("Resistance to damage by flexing Stage I ")	-	2000	-
3.1.1 and 4.1, Table - 1 (iv)("Resistance to damage by flexing Stage II ")	-	2000	-
3.1.1 and 4.1, Table - 1 (v)(Thickness)	-	200	-
4.2(Appearance)	-	500	-
4.3(Colour , Grain, Embossing and finish)	-	500	-
4.4.1(Resistance to cold)	-	3000	-
4.4.2(Colour fastness to Dry and Wet Rubbing)	-	3000	-
4.4.3(Colour fastness to light)	-	8000	-
4.4.4(Resistance to heat and loss of mass of coating on heating)	-	2000	-
4.4.5(Stability at Vulcanization Temperature)	-	2000	-
4.5(Resistance to Gelling)	-	2000	-
4.5.1(Embossing on Grain)	-	1000	-
4.6(Adhesion of print (for Printed PVC Coated fabrics))	-	500	-
4.7(Adhesion of coating)	-	400	-

26 Jul, 2027

-
Included w.e.f.17.06.2025

3392

ADARSH SCIENTIFIC RESEARCH CENTER AND TESTING LABORATORY PVT. LTD., PANVEL

7175806

IS 14543 (2024)

Packaged Drinking Water Other than Packaged Natural Mineral Water Specification Third Revision

15500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.3(Appearance)	-	50	-
5.4/Annex D/i(P,P-DDT)	-	300	-
5.4/Annex D/ii(Lindane)	-	300	-
5.4/Annex D/iv(b-Endosulfan)	-	300	-
5.4/Annex D/xvi(Dieldrin)	-	300	-
5.4/Annex D/xvi(Aldrin)	-	300	-
5.4/Annex D/i(O,P-DDT)	-	300	-
5.4/Annex D/iv(a-Endosulfan)	-	300	-
5.4/Annex D/iii(d-HCH)	-	300	-
5.4/Annex D/i(O,P-DDD)	-	300	-
5.4/Annex D/i(P,P-DDE)	-	300	-
5.4/Annex D/i(O,P-DDE)	-	300	-
5.4/Annex D/iii(a-HCH)	-	300	-
5.4/Annex D/iii(β- HCH)	-	300	-
5.4/Annex D/iv(Endosulfan sulfate)	-	300	-
5.4/Annex D/i(P,P-DDD)	-	300	-
5.4/Annex D/xii(Alachlor)	-	300	-
5.4/Annex D/vii(Chlorpyrifos)	-	300	-
5.4/Annex D/x(Butachlor)	-	300	-
5.4/Annex D/vi(Ethion)	-	300	-
5.4/Annex D/xiv(Methyl parathion)	-	300	-
5.4/Annex D/xv(Malathion)	-	300	-
5.4/Annex D/viii(Phorate)	-	300	-
5.4/Annex D/v(Monochrotophos)	-	300	-
5.4/Annex D/xiii(Atrazine)	-	300	-
5.4/Annex D/viii(Phorate sulphoxide)	-	300	-
5.4/Annex D/viii(Phorate sulfone)	-	300	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	300	-
5.4/Annex D/xxviii(Malaoxon)	-	300	-
5.4/Annex D/xi(Isoproturon)	-	300	-
5.4/Annex D/ix(2,4 –D)	-	300	-
Cl-5.1(General Requirements)	-	100	-
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	150	-
Cl-5.2.2(Coliform)	-	150	-
Cl-5.2.3(Staphylococcus aureus)	-	150	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	150	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	150	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	150	-
Cl-5.2.7(Yeast and mould)	-	150	-
Cl-5.2.8(Salmonella)	-	150	-
Cl-5.2.9(Vibrio cholera)	-	150	-
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	100	-
Cl-5.3, Table-1 (ii)(Odour)	-	100	-
Cl-5.3, Table-1 (iii)(Taste)	-	100	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	150	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	200	-
Cl-5.3, Table-1 (vi)(pH)	-	50	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	150	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	150	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	150	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	150	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	200	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	200	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	200	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	150	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	150	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	150	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	100	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	150	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	200	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	100	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	150	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	150	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	150	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	200	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	200	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	200	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	200	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	200	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	150	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	150	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	250	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	150	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	150	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	150	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	250	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	150	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	150	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	150	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	300	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	300	-
Cl-5.3, Table-3 (x)(Uranium)	-	250	-
Cl-5.4 (i)(Pesticide residues considered individually)	-	300	-
Cl-5.4 (ii)(Total pesticide residue)	-	300	-
Cl-5.2.3(Faecal streptococci)	-	150	-
Cl-5.2.8(shigella)	-	150	-
Cl-5.2.9(V.parahaemolyticus)	-	150	-
5.2.6(Aerobic Microbial Count @ 20 to 22 deg C)	-	150	-
5.4 i)(Dieldrin)	-	300	-
5.4 i)(Aldrin)	-	300	-
5.4 i)(Malathion)	-	300	-
5.4, i)("oxygen analogue of Malathion (Malaoxon)")	-	300	-
5.4 i)(Methyl Paraoxon)	-	300	-
5.4 i)(Methyl Parathion)	-	300	-
5.4 i)(Atrazine)	-	300	-
5.4 i)(Alachlor)	-	300	-
5.4 i)(Isoproturon)	-	300	-
5.4 i)(Butachlor)	-	300	-
5.4 i)(2,4-D)	-	300	-
5.4 i)(Phorate sulphone)	-	300	-
5.4 i)(Phorate sulphoxide)	-	300	-
5.4 i)(Phorate)	-	300	-
5.4 i)(Chlorpyrifos)	-	300	-
5.4 i)(Ethion)	-	300	-
5.4 i)(Monocrotophos)	-	300	-
5.4 i)(Endosulfan Sulphate)	-	300	-
5.4 i)(beta-Endosulfan)	-	300	-
5.4 i)(alpha-Endosulfan)	-	300	-
5.4 i)(Delta-HCH)	-	300	-
5.4 i)(beta-HCH)	-	300	-
5.4 i)(alpha-HCH)	-	300	-
5.4 i)(Gamma-HCH (Lindane))	-	300	-
5.4 i)(p,p DDD)	-	300	-
5.4 i)(o,p DDD)	-	300	-
5.4 i)(p,p DDE)	-	300	-
5.4, i)(o,p DDE)	-	300	-
5.4 i)(p,p DDT)	-	300	-
5.4 i)(o,p DDT)	-	300	-
Table 3, x)(Uranium)	-	250	-

14 Jan, 2027

-
Exclusion: Cl-5.3, Table-4 (i) (Alpha emitters, Becquerel (Bq/l), Cl-5.3, Table-4 (ii) (Beta emitters, Becquerel (Bq/l)

3393

Ace Test Labs & Metrology Pvt. Ltd., Sonipat

9162826

IS 302 : Part 2 : Sec 8 (2024)

Household and Similar Electrical Appliances âSafety Part 2 Particular Requirements Section 8 Shavers, Hair Clippers and Similar Appliances (First Revision)

29500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	500	-
8(Protection against access to live parts)	-	2000	-
10(Power input and current)	-	2000	-
11(Heating)	-	3000	-
12(Charging of metal-ion batteries)	-	2000	-
13.1 &13.2(Leakage current test)	-	3000	-
13.1 &13.3(Electric strength test)	-	3000	-
14(Transient overvoltages)	-	3000	-
15(Moisture resistance)	-	3000	-
15.3(Moisture resistance)	-	3000	-
16.1 &16.2(Leakage current test)	-	3000	-
16.1 & 16.3(Electric strength test)	-	2000	-
17(Overload protection of transformers and associated circuits)	-	2000	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	2000	-
19.101(Abnormal operation)	-	2000	-
20.1(Stability and mechanical hazards)	-	2000	-
20.2(Stability and mechanical hazards)	-	2000	-
21(Mechanical strength)	-	2000	-
21.101(Mechanical strength)	-	2000	-
21.102(Mechanical strength)	-	2000	-
21.103(Mechanical strength)	-	2000	-
22(Construction)	-	2000	-
22.101(Construction)	-	2000	-
22.102(Construction)	-	2000	-
22.103(Construction)	-	2000	-
23(Internal wiring)	-	2000	-
24(Components)	-	2000	-
25("Supply connection and external flexible cords")	-	2000	-
26("Terminals for external conductors")	-	2000	-
27(Provision for earthing)	-	2000	-
28(Screws and connections)	-	2000	-
29("Clearances, creepage distances and solid insulation")	-	2000	-
30(Resistance to heat and fire)	-	2000	-
31(Resistance to rusting)	-	2000	-
32("Radiation, toxicity and similar hazards")	-	2000	-
7(Marking and instructions)	-	2000	-
8(Protection against access to live parts)	-	3000	-
10(Power input and current)	-	3000	-
11(Heating)	-	3000	-
12(Charging of metal-ion batteries)	-	2000	-
13.1 &13.2(Leakage current test)	-	3000	-
13.1 &13.3(Electric strength test)	-	3000	-
14(Transient overvoltages)	-	2000	-
15(Moisture resistance)	-	3000	-
15.3(Moisture resistance)	-	3000	-
16.1 &16.2(Leakage current test)	-	3000	-
16.1 & 16.3(Electric strength test)	-	2000	-
17(Overload protection of transformers and associated circuits)	-	2000	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	2000	-
19.101(Abnormal operation)	-	2000	-
20.1(Stability and mechanical hazards)	-	2000	-
20.2(Stability and mechanical hazards)	-	2000	-
21(Mechanical strength)	-	2000	-
21.101(Mechanical strength)	-	2000	-
21.102(Mechanical strength)	-	2000	-
21.103(Mechanical strength)	-	2000	-
22(Construction)	-	2000	-
22.101(Construction)	-	2000	-
22.102(Construction)	-	2000	-
22.103(Construction)	-	2000	-
23(Internal wiring)	-	2000	-
24(Components)	-	2000	-
25("Supply connection and external flexible cords")	-	2000	-
26("Terminals for external conductors")	-	2000	-
27(Provision for earthing)	-	2000	-
28(Screws and connections)	-	2000	-
29("Clearances, creepage distances and solid insulation")	-	2000	-
30(Resistance to heat and fire)	-	2000	-
31(Resistance to rusting)	-	2000	-
32("Radiation, toxicity and similar hazards")	-	2000	-

14 Nov, 2027

-
Included w.e.f. 21.08.2025 Exclusion: "19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.4 (Surge immunity test) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Harmonics)"

3394

Global Scientific Solution (P) Ltd.

8189526

IS 368 (2014)

Electric immersion water heaters - Specification (Fifth Revision)

Rated voltage being not more than 250 V.

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 of IS 302-‐2-‐201:2008(Classification)	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.8 of IS 302‐2-201: 2008(Protection Against Access to Live Parts)	-	1000	-
Cl.10 of IS 302‐2‐201:2008(Power Input and Current )	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl. 12 of IS 368:2014(Operation under overload conditions of appliances with heating elements)	-	1000	-
Cl.13 of IS 302-2-201: 2008(Leakage Current & Electric Strength at Operating Temperature)	-	2000	-
Cl.13 of IS 302-2-201: 2009(Leakage Current & Electric Strength at Operating Temperature)	-	2000	-
Cl.14 of IS 302‐2-201:2008(Transient Over Voltages )	-	1000	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	2000	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	2000	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	2000	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	2000	-
Cl.17 of IS 302‐2-201: 2008(Overload Protection of Transformers & Associated Circuits)	-	1000	-
Cl.18 of IS 368:2014(Endurance)	-	2000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.20 of IS 302-2-201: 2008(Stability & Mechanical Hazards)	-	1000	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	1000	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	1000	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	1000	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	1000	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	1000	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	1000	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	1000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	1000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	1000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	1000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	1000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	1000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	1000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	1000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.26 of IS 302-2-201: 2008(Terminals for External Conductors)	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.28 of IS 302-2-201: 2008(Screws & Connections )	-	1000	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	1000	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	1000	-
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	1000	-
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	1000	-
Cl.31 of IS 302-2-201:2008(Resistance of Rusting )	-	1000	-
Cl.32 of IS 302-2-201:2008(Radiation, Toxicity and Similar Hazards)	-	1000	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
4(GENERAL REQUIREMENT)	-	1000	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-

31 Oct, 2028

-
Cl. 19.11.4.1 to Cl. 19.11.4.7 (EMI/EMC), Cl. 24, Cl. 32.2, Cl. 15.1.1(IPX7-8), Cl 12 as per IS 302-2-201

3395

JUBILANT PHARMA AND CHEMICAL LAB (OPC) PVT.LTD, NAVI MUMBAI

7169416

IS 13428 (2024)

PACKAGED NATURAL MINERAL WATER - SPECIFICATION Third Revision

11500.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2/Table 1/i(Colour)	-	50.00	-
6.2/Table 1/ii(Odour)	-	50.00	-
6.2/Table 1/iii(Taste)	-	50.00	-
6.2/Table 1/iv(Turbidity)	-	50.00	--
6.2/Table 1/v(Total Dissoved)	-	200.00	--
6.2/Table 1/vi(pH Value)	-	50.00	--
6.2/Table 2/i(Nitrate)	-	125.00	--
6.2/Table 2/ii(Nitrite)	-	125.00	--
6.2/Table 2/iii(Sulphide)	-	125.00	--
6.2/Table 2/iv(Manganese)	-	125.00	--
6.2/Table 2/v(Copper)	-	125.00	--
6.2/Table 2/vi(Fluoride)	-	125.00	--
6.2/Table 2/vii(Barium)	-	125.00	--
6.2/Table 2/viii(Antimony)	-	125.00	--
6.2/Table 2/ix(Borate)	-	125.00	--
6.2/Table 2/x(Silver)	-	125.00	--
6.2/Table 2/xi(Chloride)	-	125.00	--
6.2/Table 2/xii(Sulphate)	-	125.00	--
6.2/Table 2/xiii(Magnesium)	-	125.00	--
6.2/Table 2/xiv(Calcium)	-	125.00	--
6.2/Table 2/xv(Sodium)	-	125.00	--
6.2/Table 2/xvi(Alkalinity)	-	125.00	--
6.2/Table 2/xvii(Selenium)	-	125.00	--
6.2/Table 2/xviii(Mineral Oil)	-	350.00	--
6.2/Table 2/xix(Phenolic Compounds)	-	200.00	--
6.2/Table 2/xx(Anionic Surface active agents)	-	250.00	--
6.2/Table 3/i(Arsenic)	-	125.00	--
6.2/Table 3/ii(Cadmium)	-	125.00	--
6.2/Table 3/iii(Cyanide)	-	125.00	--
6.2/Table 3/iv(Chromium)	-	125.00	--
6.2/Table 3/v(Mercury)	-	125.00	--
6.2/Table 3/vi(Lead)	-	125.00	--
6.2/Table 3/vii(Nickel)	-	125.00	--
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	400.00	--
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	400.00	--
6.2/Table 3/x(Uranium)	-	500.00	--
Cl- 6.3, Annex N (i)(P,P -DDE)	-	0.00	--
Cl- 6.3, Annex N (i)(O,P -DDE)	-	0.00	--
Cl- 6.3, Annex N (i)(P,P- DDT)	-	0.00	--
Cl- 6.3, Annex N (i)(O,P -DDT)	-	0.00	--
Cl-6.3, Annex N (i)(P,P- DDD)	-	0.00	--
Cl-6.3, Annex N (i)(O,P-DDD)	-	0.00	--
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	0.00	--
Cl- 6.3, Annex N (iii)(α-HCH)	-	0.00	--
Cl- 6.3, Annex N (iii)(β-HCH)	-	0.00	--
Cl- 6.3, Annex N (iii)(δ - HCH)	-	0.00	--
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	0.00	--
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	0.00	--
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	0.00	--
Cl- 6.3, Annex N (v)(Monocrotophos)	-	0.00	--
Cl- 6.3, Annex N (vi)(Ethion)	-	0.00	--
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	0.00	--
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	0.00	--
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	0.00	--
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	0.00	--
Cl- 6.3, Annex N (ix)(2,4-D)	-	0.00	--
Cl- 6.3, Annex N (x)(Butachlor)	-	0.00	--
Cl- 6.3, Annex N (xi)(Isoproturon)	-	0.00	--
Cl- 6.3, Annex N (xii)(Alachlor)	-	0.00	--
Cl- 6.3, Annex N (xiii)(Atrazine)	-	0.00	--
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	0.00	--
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	0.00	--
Cl- 6.3, Annex N (xvi)(Aldrin)	-	0.00	--
Cl-6.3, Annex N (XVI)(Dieldrin)	-	1000.00	Total Pesticides Residue charges is Rs. 1000/- +GST
6.1.1(Escherichia coli)	-	300.00	--
6.1.2(Coliform)	-	300.00	--
6.1.3(Faecal Streptococci)	-	300.00	--
6.1.4(Sulphite Reducing Anaerobe)	-	300.00	--
6.1.5(Pseudomonas aeruginosa)	-	300.00	--
6.1.6(Yeast and moould)	-	300.00	--
6.1.7(Salmonella)	-	300.00	--
6.1.8(Vibrio Cholera)	-	300.00	--
Cl-6.1.3(Staphylococcus aureus)	-	300.00	--
Cl-6.1.7(Shigella)	-	300.00	--
Cl-6.1.8(V. parahaemolyticus)	-	300.00	--
Cl- 6.3, Annex N (xv)(Malathion)	-	300	--

12 Dec, 2027

-
Exclusion Cl 6.2/Table 4/i (Alpha emitters, Bq/l, Max) Cl 6.2/Table 4/ii (Beta emitters, Bq/l, Max)

3396

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 6809 (1990)

Rehabilitation equipment - Fixed height walking frame - Specification (First Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3.1(shape and dimensions)	-	500	-
Cl-4.1(Framework)	-	2500	-
Cl-4.2(Hand Grip)	-	500	-
Cl-4.3(Ferrule)	-	500	-
Cl-4.4(Washers, Screws and Rivets)	-	2500	-
Cl-5(Construction)	-	500	-
Cl-6(Workmanship and finish)	-	100	-
Cl-7.1(Stability Test)	-	1000	-
Cl-7.2(Load Test)	-	1000	-
Cl-8(Marking)	-	500	-
Cl-3.1(shape and dimensions)	-	0	-
Cl-4.1(Framework)	-	0	-
Cl-4.2(Hand Grip)	-	0	-
Cl-4.3(Ferrule)	-	0	-
Cl-4.4(Washers, Screws and Rivets)	-	0	-
Cl-5(Construction)	-	0	-
Cl-6(Workmanship and finish)	-	0	-
Cl-7.1(Stability Test)	-	0	-
Cl-7.2(Load Test)	-	0	-
Cl-8(Marking)	-	0	-

26 Jul, 2027

-
Included w.e.f 03.06.2025

3397

ACCURATE TEST SOLUTIONS LLP (F21), NOIDA

8141226

IS 4246 (2002)

Domestic gas stoves for use with liquefied petroleum gases - Specification (Fifth Revision)

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.24(Annexure E)(on no account the carbon monoxidel carbon dioxide ratio of the exhaust gases of any burner. operating at any consumption at which the burner is stable at gas inlet pressure from 2452 kN/m2 to 3432 kN/m2 (25 gf/cm2 to 35 gf/cm2), exceed 0.02.)	-	500	-
Cl.23(There shall be no extinction of the flames on any of the burners operating at maximum consumption when the appliance is placed in a general (not localized) current of air with a velocity of 2 m/s, as measured with a rotating vane anemometer. The location of the appliance relative to neighboring walls and the direction of the draught shall be varied to correspond to likely conditions of appliance installation. This applies for all pressures from 2452 kN/m2 to 3432 kN/m2 (25 gf/cm2 to 35 gf/cm2).)	-	500	-
24 (Annex - E)(Combustion (CO and CO2 ratio))	-	500	-
4.1(Requirement)	-	500	-
5(Materials)	-	500	-
6(Design for Maintenance)	-	500	-
7(Rigidity and Stability)	-	500	-
8(Workmanship and Finish)	-	500	-
9(Gas Taps)	-	500	-
10(Injector Jets)	-	500	-
11(Burners)	-	500	-
12(Burner Pan Supports)	-	500	-
13.1(Gas Soundness)	-	500	-
13.2(Gas Leak Detector)	-	1000	-
14(Gas Inlet Connections)	-	500	-
15(Strength and Rigidity)	-	500	-
16(General Conditions of Test)	-	500	-
17.1.1(Gas Consumption)	-	500	-
18(Ignition and Flame Travel)	-	500	-
19(Flame Stability)	-	500	-
20(Noise Control)	-	500	-
21(Flash Back)	-	500	-
22(Formation of Soot)	-	500	-
23(Resistance to Draught)	-	500	-
24(Combustion)	-	500	-
25(Fire Hazard and Limiting Temperature)	-	1000	-
26(Thermal Efficiency)	-	1000	-
27.1(Type Tests)	-	500	-
27.2(Routine Tests)	-	500	-
29(Marking)	-	500	-
30(Packing)	-	500	-
5.1.2(Toughened glass- Adhesive tape)	-	500	-
5.1.3(Thermal Shock test)	-	500	-
24 (Annex - E)(Combustion (CO and CO2 ratio))	-	500	-
4.1(Requirement)	-	500	-
5(Materials)	-	500	-
6(Design for Maintenance)	-	500	-
7(Rigidity and Stability)	-	500	-
8(Workmanship and Finish)	-	500	-
9(Gas Taps)	-	500	-
10(Injector Jets)	-	500	-
11(Burners)	-	500	-
12(Burner Pan Supports)	-	500	-
13.1(Gas Soundness)	-	500	-
13.2(Gas Leak Detector)	-	1000	-
14(Gas Inlet Connections)	-	500	-
15(Strength and Rigidity)	-	500	-
16(General Conditions of Test)	-	500	-
17.1.1(Gas Consumption)	-	500	-
18(Ignition and Flame Travel)	-	500	-
19(Flame Stability)	-	500	-
20(Noise Control)	-	500	-
21(Flash Back)	-	500	-
22(Formation of Soot)	-	500	-
23(Resistance to Draught)	-	500	-
24(Combustion)	-	500	-
25(Fire Hazard and Limiting Temperature)	-	1000	-
26(Thermal Efficiency)	-	1000	-
27.1(Type Tests)	-	500	-
27.2(Routine Tests)	-	500	-
29(Marking)	-	500	-
30(Packing)	-	500	-
5.1.2(Toughened glass- Adhesive tape)	-	500	-
5.1.3(Thermal Shock test)	-	500	-
24 (Annex - E)(Combustion (CO and CO2 ratio))	-	-	-
4.1(Requirement)	-	-	-
5(Materials)	-	-	-
6(Design for Maintenance)	-	-	-
7(Rigidity and Stability)	-	-	-
8(Workmanship and Finish)	-	-	-
9(Gas Taps)	-	-	-
10(Injector Jets)	-	-	-
11(Burners)	-	-	-
12(Burner Pan Supports)	-	-	-
13.1(Gas Soundness)	-	-	-
13.2(Gas Leak Detector)	-	-	-
14(Gas Inlet Connections)	-	-	-
15(Strength and Rigidity)	-	-	-
16(General Conditions of Test)	-	-	-
17.1.1(Gas Consumption)	-	-	-
18(Ignition and Flame Travel)	-	-	-
19(Flame Stability)	-	-	-
20(Noise Control)	-	-	-
21(Flash Back)	-	-	-
22(Formation of Soot)	-	-	-
23(Resistance to Draught)	-	-	-
24(Combustion)	-	-	-
25(Fire Hazard and Limiting Temperature)	-	-	-
26(Thermal Efficiency)	-	-	-
27.1(Type Tests)	-	-	-
27.2(Routine Tests)	-	-	-
29(Marking)	-	-	-
30(Packing)	-	-	-
5.1.2(Toughened glass- Adhesive tape)	-	-	-
5.1.3(Thermal Shock test)	-	-	-

04 Jul, 2027

-
Included w.e.f. 27.08.2025

3398

Bharat Test House Pvt Ltd 781 Sonipat Haryana

9137826

IS 4250 (2025)

Electric Food-Mixers (Liquidizers and Grinders) and Centrifugal Juicers ï¿½ Specification ( Second Revision )

Electric Food-Mixers (Liquidizers and Grinders) and Centrifugal Juicers - Specification

143000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	100	-
Cl-5(General Conditions for the tests)	-	100	-
Cl-6(Classification)	-	100	-
Cl-7(Marking)	-	100	-
Cl-8(Safety Requirements)	-	12500	-
Cl-9(Endurance fpr motor and base assembly)	-	2500	-
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	600	-
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	200	-
Cl-10.4(Idli Batter)	-	600	-
Cl-10.5(Operational Tests for Juicers)	-	600	-
Cl-11(Temperature Withstand Test for Bowl)	-	200	-
Cl-12.1(Test for Switches)	-	200	-
Cl-13(Strength of Assembly)	-	400	-
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	400	-
Cl-14.2, Table-2 (ii)(Power input and current)	-	500	-
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	500	-
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	1500	-
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	500	-
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	400	-
Cl-19.11.4.1(Electrostatic discharges)	-	125000	EMI/EMC Test facility is available under our other BIS recognized lab.
Cl-19.11.4.2(Radiated fields)	-	125000	EMI/EMC Test facility is available under our other BIS recognized lab.
Cl-19.11.4.3(Fast transient bursts)	-	125000	EMI/EMC Test facility is available under our other BIS recognized lab.
Cl-19.11.4.4(Surge immunity test)	-	125000	EMI/EMC Test facility is available under our other BIS recognized lab.
Cl-19.11.4.5(Immunity to conducted discharges)	-	125000	EMI/EMC Test facility is available under our other BIS recognized lab.
Cl-19.11.4.6(Class 3 Voltage dips and interruptions)	-	125000	EMI/EMC Test facility is available under our other BIS recognized lab.
Cl-19.11.4.7(Harmonics)	-	125000	EMI/EMC Test facility is available under our other BIS recognized lab.
Cl-4(General Requirements)	-	100	-
Cl-5(General Conditions for the tests)	-	100	-
Cl-6(Classification)	-	100	-
Cl-7(Marking)	-	100	-
Cl-8(Safety Requirements)	-	12500	-
Cl-9(Endurance fpr motor and base assembly)	-	2500	-
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	600	-
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	200	-
Cl-10.4(Idli Batter)	-	600	-
Cl-10.5(Operational Tests for Juicers)	-	600	-
Cl-11(Temperature Withstand Test for Bowl)	-	200	-
Cl-12.1(Test for Switches)	-	400	-
Cl-13(Strength of Assembly)	-	400	-
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	400	-
Cl-14.2, Table-2 (ii)(Power input and current)	-	500	-
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	500	-
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	500	-
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	500	-
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	400	-
Cl-19.11.4.1(Electrostatic discharges)	-	125000	EMI/EMC Test facility is available under our other BIS recognized lab.
Cl-19.11.4.2(Radiated fields)	-	125000	EMI/EMC Test facility is available under our other BIS recognized lab.
Cl-19.11.4.3(Fast transient bursts)	-	125000	EMI/EMC Test facility is available under our other BIS recognized lab.
Cl-19.11.4.4(Surge immunity test)	-	125000	EMI/EMC Test facility is available under our other BIS recognized lab.
Cl-19.11.4.5(Immunity to conducted discharges)	-	125000	EMI/EMC Test facility is available under our other BIS recognized lab.
Cl-19.11.4.6(Class 3 Voltage dips and interruptions)	-	125000	EMI/EMC Test facility is available under our other BIS recognized lab.
Cl-19.11.4.7(Harmonics)	-	125000	EMI/EMC Test facility is available under our other BIS recognized lab.
Cl-4(General Requirements)	-	100	-
Cl-5(General Conditions for the tests)	-	100	-
Cl-6(Classification)	-	100	-
Cl-7(Marking)	-	100	-
Cl-8(Safety Requirements)	-	12500	-
Cl-9(Endurance fpr motor and base assembly)	-	2500	-
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	600	-
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	200	-
Cl-10.4(Idli Batter)	-	600	-
Cl-10.5(Operational Tests for Juicers)	-	600	-
Cl-11(Temperature Withstand Test for Bowl)	-	200	-
Cl-12.1(Test for Switches)	-	200	-
Cl-13(Strength of Assembly)	-	400	-
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	400	-
Cl-14.2, Table-2 (ii)(Power input and current)	-	500	-
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	500	-
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	1500	-
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	500	-
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	400	-
Cl-19.11.4.1(Electrostatic discharges)	-	125000	EMI/EMC Test facility is available under our other BIS recognized lab.
Cl-19.11.4.2(Radiated fields)	-	125000	EMI/EMC Test facility is available under our other BIS recognized lab.
Cl-19.11.4.3(Fast transient bursts)	-	125000	EMI/EMC Test facility is available under our other BIS recognized lab.
Cl-19.11.4.4(Surge immunity test)	-	125000	EMI/EMC Test facility is available under our other BIS recognized lab.
Cl-19.11.4.5(Immunity to conducted discharges)	-	125000	EMI/EMC Test facility is available under our other BIS recognized lab.
Cl-19.11.4.6(Class 3 Voltage dips and interruptions)	-	125000	EMI/EMC Test facility is available under our other BIS recognized lab.
Cl-19.11.4.7(Harmonics)	-	125000	EMI/EMC Test facility is available under our other BIS recognized lab.

31 Dec, 2026

-
Included w.e.f 26.08.2025

3399

ACE TEST HOUSE PRIVATE LIMITED (8161906), NEW DELHI

8161906

IS 2191 : Part 1 (2022)

WOODEN FLUSH DOOR SHUTTERS CELLULAR TUBULAR AND HOLLOW CORE TYPE SPECIFICATION PART 1 PLYWOOD FACE PANELS Fifth Revision

BWP,MR,8DS20,8DS21,9DS20,9DS21,10DS20,10DS21,12DT20,12DT21

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(Sizes)	-	0	-
Cl-6.1.1(Species of timber)	-	0	-
Cl-6.3(Cross-Bands)	-	0	-
Cl-6.4.1(Commercial face veneers)	-	0	-
Cl-6.4.2(Decorative face veneers)	-	0	-
Cl-6.7(Particle Board)	-	0	-
Cl-6.8(Laminated veneer lumber (LVL), veneer laminated lumber (VLL), Medium Density Fibre (MDF))	-	0	-
Cl-11.1(Dimensions and Squareness Test)	-	1300	-
Cl-11.2(General Flatness Test)	-	1500	-
Cl-11.3(Local Planeness Test)	-	1500	-
Cl-11.4(Impact Indentation Test)	-	1500	-
Cl-11.5(Flexure Test)	-	2000	-
Cl-11.6(Edge Loading Test)	-	1500	-
Cl-11.7(Shock Resistance Test)	-	2000	-
Cl-11.8(Buckling Resistance Test)	-	1500	-
Cl-11.9(Slamming Test)	-	1000	-
Cl-11.10(Misuse Test)	-	1000	-
Cl-11.11(Varying Humidity Test)	-	1500	-
Cl-11.12(End Immersion Test)	-	2500	-
Cl-11.13(Knife Test)	-	1500	-
Cl-11.14(Glue Adhesion Test)	-	1500	-
Cl-11.15(Screw Withdrawal Resistance Test)	-	2500	-
Cl-12.2(Sample Size)	-	0	-
Cl-14(Marking)	-	0	-
Cl-6.1.2(Moisture content of timber)	-	500	-
Cl-9(Workmanship and Finish)	-	200	-
Cl-6.1.3(Defects)	-	0	-
Cl-6.2(Plywood)	-	0	-
Cl-6.5(Cross-bands and face veneers)	-	0	-
Cl-6.6(Adhesives)	-	0	-
Cl-7(Construction)	-	0	-
Cl-8(Fittings)	-	0	-
Cl-5(Sizes)	-	0	-
Cl-6.1.1(Species of timber)	-	0	-
Cl-6.3(Cross-Bands)	-	0	-
Cl-6.4.1(Commercial face veneers)	-	0	-
Cl-6.4.2(Decorative face veneers)	-	0	-
Cl-6.7(Particle Board)	-	0	-
Cl-6.8(Laminated veneer lumber (LVL), veneer laminated lumber (VLL), Medium Density Fibre (MDF))	-	0	-
Cl-11.1(Dimensions and Squareness Test)	-	0	-
Cl-11.2(General Flatness Test)	-	0	-
Cl-11.3(Local Planeness Test)	-	0	-
Cl-11.4(Impact Indentation Test)	-	0	-
Cl-11.5(Flexure Test)	-	0	-
Cl-11.6(Edge Loading Test)	-	0	-
Cl-11.7(Shock Resistance Test)	-	0	-
Cl-11.8(Buckling Resistance Test)	-	0	-
Cl-11.9(Slamming Test)	-	0	-
Cl-11.10(Misuse Test)	-	0	-
Cl-11.11(Varying Humidity Test)	-	0	-
Cl-11.12(End Immersion Test)	-	0	-
Cl-11.13(Knife Test)	-	0	-
Cl-11.14(Glue Adhesion Test)	-	0	-
Cl-11.15(Screw Withdrawal Resistance Test)	-	0	-
Cl-12.2(Sample Size)	-	0	-
Cl-14(Marking)	-	0	-
Cl-6.1.2(Moisture content of timber)	-	0	-
Cl-9(Workmanship and Finish)	-	0	-
Cl-6.1.3(Defects)	-	0	-
Cl-6.2(Plywood)	-	0	-
Cl-6.5(Cross-bands and face veneers)	-	0	-
Cl-6.6(Adhesives)	-	0	-
Cl-7(Construction)	-	0	-
Cl-8(Fittings)	-	0	-

26 Aug, 2027

-
Included w.e.f.06.05.2025

3400

ALPHA TEST HOUSE SERVICES LLP (Unit-1), MOHALI

9184906

IS 848 (2006)

Synthetic resin adhesives for plywood (Phenolic And Aminoplastic) - Specification (Second Revision)

all

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4 Table (i)(BWP (BOiling WaterProof))	-	8500	-
4 Table (i)(BWR (Boiling Water Resistant))	-	8500	-
5,7.4(Keeping Quality (Resistance to heat Polymerization))	-	8500	-
4 Table (i)(MR (Moisture Ressistant))	-	8500	-
7.4(Acidity and Alkalinity ( pH))	-	8500	-

25 Apr, 2028

-
Included w.e.f 19.05.2025

3401

WELL TECH TEST AND RESEARCH CENTER, DERABASSI

9177306

IS 2062 (2011)

Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)

TABLE 1 AND TABLE

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 18(Weight)	-	10000	-
Cl 15(Length, Width & Thickness)	-	10000	-
Cl 12(Sudden Load Applied)	-	10000	-
Cl 11.3(Press)	-	10000	-
Cl 10.3(UTM)	-	10000	-
Cl 7(Workmanship)	-	10000	-
Cl 18(Weight)	-	10000	-
Cl 15(Length, Width & Thickness)	-	10000	-
Cl 12(Sudden Load Applied)	-	10000	-
Cl 11.3(Press)	-	10000	-
Cl 10.3(UTM)	-	10000	-
Cl 7(Workmanship)	-	10000	-
Cl 18(Weight)	-	10000	-
Cl 15(Length, Width & Thickness)	-	10000	-
Cl 12(Sudden Load Applied)	-	10000	-
Cl 11.3(Press)	-	10000	-
Cl 10.3(UTM)	-	10000	-
Cl 7(Workmanship)	-	10000	-
Clause - 5, 8.1 & 8.2(E650, CARBON +EQUIVELENT )	-	10000	-
Cl. 15 (Cl. 15 Channel Section: Sweep)	-	10000	-
Cl. 15(Cl. 15 Channel Section: Camber)	-	10000	-
Cl. 15(Cl. 15 Channel Section: Flatness of Web (Concavity))	-	10000	-
Cl. 15(Cl. 15 Channel Section: Flatness of Web (Convexity))	-	10000	-
Cl. 15(Cl. 15 Channel Section: Flange Out of Square)	-	10000	-
Cl. 15(Cl. 15 Channel Section: Width of Flange)	-	10000	-
Cl. 15(Cl. 15 Channel Section: Depth)	-	10000	-
Cl. 15(Cl. 15 Square Bar: Out of Square)	-	10000	-
Cl. 15(Cl. 15 Square Bar: Side Width: Minimum)	-	10000	-
Cl. 15(Cl. 15 Square Bar: Side Width: Maximum)	-	10000	-
Cl. 15(Cl. 15 Round Bar: Out of Shape)	-	10000	-
Cl. 15(Cl. 15 Round Bar: Diameter Minimum)	-	10000	-
Cl. 15(Cl. 15 Round Bar: Diameter Maximum)	-	10000	-
Cl. 10.3 (Cl. 10.3 (Elongation %))	-	10000	-
Cl. 10.3 (Cl. 10.3 (Yield Stress))	-	10000	-
Cl. 10.3 (Cl. 10.3 (Tensile Strength))	-	10000	-
Clause - 5, 8.1 & 8.2(E650, ALUMINIUM)	-	10000	-
Clause - 5, 8.1 & 8.2(E650, SILICON)	-	10000	-
Clause - 5, 8.1 & 8.2(E650, NITROGEN)	-	10000	-
Clause - 5, 8.1 & 8.2(E650 ,MANGANESE)	-	10000	-
Clause - 5, 8.1 & 8.2(E650, PHOSPHURS)	-	10000	-
Clause - 5, 8.1 & 8.2(E650, SULPHUR)	-	10000	-
Clause - 5, 8.1 & 8.2(E650, CARBON)	-	10000	-
Clause - 5, 8.1 & 8.2(E600, CARBON +EQUIVELENT )	-	10000	-
Clause - 5, 8.1 & 8.2(E600, ALUMINIUM)	-	10000	-
Clause - 5, 8.1 & 8.2(E600, SILICON)	-	10000	-
Clause - 5, 8.1 & 8.2(E600, NITROGEN)	-	10000	-
Clause - 5, 8.1 & 8.2(E600 ,MANGANESE)	-	10000	-
Clause - 5, 8.1 & 8.2(E600, PHOSPHURS)	-	10000	-
Clause - 5, 8.1 & 8.2(E600, SULPHUR)	-	10000	-
Clause - 5, 8.1 & 8.2(E600, CARBON)	-	10000	-
Clause - 5, 8.1 & 8.2(E550, CARBON +EQUIVELENT )	-	10000	-
Clause - 5, 8.1 & 8.2(E550, ALUMINIUM)	-	10000	-
Clause - 5, 8.1 & 8.2(E550, NITROGEN)	-	10000	-
Clause - 5, 8.1 & 8.2(E550, SILICON)	-	10000	-
Clause - 5, 8.1 & 8.2(E550 ,MANGANESE)	-	10000	-
Clause - 5, 8.1 & 8.2(E550, PHOSPHURS)	-	10000	-
Clause - 5, 8.1 & 8.2(E550, SULPHUR)	-	10000	-
Clause - 5, 8.1 & 8.2(E550, CARBON)	-	10000	-
Clause - 5, 8.1 & 8.2(E450, CARBON +EQUIVELENT )	-	10000	-
Clause - 5, 8.1 & 8.2(E450, ALUMINIUM)	-	10000	-
Clause - 5, 8.1 & 8.2(E450, SILICON)	-	10000	-
Clause - 5, 8.1 & 8.2(E450, NITROGEN)	-	10000	-
Clause - 5, 8.1 & 8.2(E450 ,MANGANESE)	-	10000	-
Clause - 5, 8.1 & 8.2(E450, PHOSPHURS)	-	10000	-
Clause - 5, 8.1 & 8.2(E450, SULPHUR)	-	10000	-
Clause - 5, 8.1 & 8.2(E450, CARBON)	-	10000	-
Clause - 5, 8.1 & 8.2(E410, CARBON +EQUIVELENT )	-	10000	-
Clause - 5, 8.1 & 8.2(E410, ALUMINIUM)	-	10000	-
Clause - 5, 8.1 & 8.2(E410, SILICON)	-	10000	-
Clause - 5, 8.1 & 8.2(E410, NITROGEN)	-	10000	-
Clause - 5, 8.1 & 8.2(E410 ,MANGANESE)	-	10000	-
Clause - 5, 8.1 & 8.2(E410, PHOSPHURS)	-	10000	-
Clause - 5, 8.1 & 8.2(E410, SULPHUR)	-	10000	-
Clause - 5, 8.1 & 8.2(E410, CARBON)	-	10000	-
Clause - 5, 8.1 & 8.2(E350, CARBON +EQUIVELENT )	-	10000	-
Clause - 5, 8.1 & 8.2(E350, ALUMINIUM)	-	10000	-
Clause - 5, 8.1 & 8.2(E350, SILICON)	-	10000	-
Clause - 5, 8.1 & 8.2(E350, NITROGEN)	-	10000	-
Clause - 5, 8.1 & 8.2(E350 ,MANGANESE)	-	10000	-
Clause - 5, 8.1 & 8.2(E350, PHOSPHURS)	-	10000	-
Clause - 5, 8.1 & 8.2(E350, SULPHUR)	-	10000	-
Clause - 5, 8.1 & 8.2(E350, CARBON)	-	10000	-
Clause - 5, 8.1 & 8.2(E300, CARBON +EQUIVELENT )	-	10000	-
Clause - 5, 8.1 & 8.2(E300, ALUMINIUM)	-	10000	-
Clause - 5, 8.1 & 8.2(E300, SILICON)	-	10000	-
Clause - 5, 8.1 & 8.2(E300, NITROGEN)	-	10000	-
Clause - 5, 8.1 & 8.2(E300 ,MANGANESE)	-	10000	-
Clause - 5, 8.1 & 8.2(E300, PHOSPHURS)	-	10000	-
Clause - 5, 8.1 & 8.2(E300, SULPHUR)	-	10000	-
Clause - 5, 8.1 & 8.2(E300, CARBON)	-	10000	-
Clause - 5, 8.1 & 8.2(E275, CARBON +EQUIVELENT )	-	10000	-
Clause - 5, 8.1 & 8.2(E275, ALUMINIUM)	-	10000	-
Clause - 5, 8.1 & 8.2(E275, SILICON)	-	10000	-
Clause - 5, 8.1 & 8.2(E275, NITROGEN)	-	10000	-
Clause - 5, 8.1 & 8.2(E275 ,MANGANESE)	-	10000	-
Clause - 5, 8.1 & 8.2(E275, PHOSPHURS)	-	10000	-
Clause - 5, 8.1 & 8.2(E275, SULPHUR)	-	10000	-
Clause - 5, 8.1 & 8.2(E275, CARBON)	-	10000	-
Clause - 5, 8.1 & 8.2(E250, CARBON +EQUIVELENT )	-	10000	-
Clause - 5, 8.1 & 8.2(E250, ALUMINIUM)	-	10000	-
Clause - 5, 8.1 & 8.2(E250, SILICON)	-	10000	-
Clause - 5, 8.1 & 8.2(E250, NITROGEN)	-	10000	-
Clause - 5, 8.1 & 8.2(E250 ,MANGANESE)	-	10000	-
Clause - 5, 8.1 & 8.2(E250, PHOSPHURS)	-	10000	-
Clause - 5, 8.1 & 8.2(E250, SULPHUR)	-	10000	-
Clause - 5, 8.1 & 8.2(E250, CARBON)	-	10000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon Equivalent- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
Cl. 15, 16(Off Centre of Web)	-	10000	-
Cl. 15, 16(Flange out of square (I beam))	-	10000	-
Cl. 15, 16(Width of flange (I Beam))	-	10000	-
Cl. 15, 16(Depth (I Beam))	-	10000	-
Cl. 15, 16(Mass (Plate))	-	10000	-
Cl. 15, 16(Flange Slope)	-	10000	-
Cl. 15, 16(Web Thickness)	-	10000	-
Cl. 15, 16(Flange Thickness)	-	10000	-
Cl. 15, 16(Out of Square (Flat))	-	10000	-
Cl. 15, 16(Width )	-	10000	-
Cl. 15, 16(Thickness )	-	10000	-
Cl. 15, 16(Sectional Area )	-	10000	-
Cl. 15, 16(Camber (Angle))	-	10000	-
Cl. 15, 16(Out of Square (Angle))	-	10000	-
Cl. 15, 16(Weight)	-	10000	-
Cl. 15, 16(Leg Length Difference (Angle))	-	10000	-
Cl. 15, 16(Leg Length B (Angle))	-	10000	-
Cl. 15, 16(Leg Length A (Angle))	-	10000	-
Cl. 15, 16(Toe Radius R2)	-	10000	-
Cl. 15, 16(Root Radius R1)	-	10000	-
Cl 18(Weight)	-	10000	-
Cl 15(Length, Width & Thickness)	-	10000	-
Cl 12(Sudden Load Applied)	-	10000	-
Cl 11.3(Press)	-	10000	-
Cl 10.3(UTM)	-	10000	-
Cl 7(Workmanship)	-	10000	-
Cl 7(Workmanship)	-	10000	-
Cl 10.3(UTM)	-	10000	-
Cl 11.3(Press)	-	10000	-
Cl 12(Sudden Load Applied)	-	10000	-
Cl 15(Length, Width & Thickness)	-	10000	-
Cl 18(Weight)	-	10000	-
Clause 8, Table 1, Note 2(Any Instrumental Method/Chemical Method)	-	10000	-
Clause 8, Table 1, Note 5(Any Instrumental Method/Chemical Method)	-	10000	-
Clause 8, Table 1, Note 5(Any Instrumental Method/Chemical Method)	-	10000	-
Clause 8, Table 1, Note 5(By Calculation)	-	10000	-
Clause 8, Table 1, Note 6(Any Instrumental Method/Chemical Method)	-	10000	-
Clause 8, Table 1, Note 6(By Calculation)	-	10000	-
Clause 7(IS 2062)	-	10000	-
Clause 11.3(IS 1599)	-	10000	-
Clause 12(IS 1757)	-	10000	-
Clause 15, Table 4(IS 2062)	-	10000	-
16(Tolerance)	-	10000	-
20(Marking)	-	10000	-
20(MARKING)	-	10000	-
8(Micro Alloying elements)	-	10000	-
8(Niobium as Nb)	-	10000	-
8(Vanadium as V)	-	10000	-
8(Titanium as Ti)	-	10000	-
10(Tensile Strength-IS:1608(P1)-22)	-	10000	-
10(Yield Stress-IS:1608(P1)-22)	-	10000	-
10(Elongation on SoA 5.65mm GL)	-	10000	-
15(Sectional Area)	-	10000	-
15(Dimension -D)	-	10000	-
15(Dimension -B)	-	10000	-
15(Thickness - t)	-	10000	-
15(Thickness - T)	-	10000	-
15(Flange Slope)	-	10000	-
15(Radius R1)	-	10000	-
15(Radius R2)	-	10000	-
15(Mass -SOP MT-23)	-	10000	-
15(Sectional Area)	-	10000	-
15(Dimension -D)	-	10000	-
15(Dimension -B)	-	10000	-
15(Thickness - t)	-	10000	-
15(Thickness - T)	-	10000	-
15(Radius R1)	-	10000	-
15(Radius R2)	-	10000	-
15(Mass -SOP MT-23)	-	10000	-
15(Sectional Area)	-	10000	-
15(Dimensions AxB)	-	10000	-
15(Thickness - t)	-	10000	-
15(Radius -R1)	-	10000	-
15(Radius -R2)	-	10000	-
15(Diameter)	-	10000	-
15(Sectional Area)	-	10000	-
15(Mass per metre)	-	10000	-
15(Mass per metre)	-	10000	-
15(Ovality)	-	10000	-
15(Side Width)	-	10000	-
15(Sectional Area)	-	10000	-
15(Mass per metre)	-	10000	-
15(Out of Square)	-	10000	-
9(Preparation of test sample)	-	10000	-
Clause 8, Table 1, Note 2(Aluminium)	-	10000	-
Clause 8, Table 1, Note 5(Niobium)	-	10000	-
Clause 8, Table 1, Note 5(Titanium)	-	10000	-
Clause 8, Table 1, Note 5(Nb+V+Ti)	-	10000	-
Clause 8, Table 1, Note 6(Boron)	-	10000	-
Clause 8, Table 1, Note 6(Cr+Ni)	-	10000	-
Clause 7(Freedom from Defect)	-	10000	-
Clause 11.3(Bend Test)	-	10000	-
Clause 12(Impact Test)	-	10000	-
Clause 15, Table 4(Dimension)	-	10000	-
5(General Requirements)	-	10000	-
4(MARKING)	-	10000	-
15(Mass -SOP MT-23)	-	10000	-

30 Mar, 2027

-
Included w.e.f.28.07.2025 Exclusion Cl 13 (Y Groove Cracking Test) Cl 14.1 (Soundness test) Cl 14.2 (Grain Size) Cl 14.2 (Inclusion)

3402

Global Scientific Solution (P) Ltd.

8189526

IS 366 (1991)

Electric iron - Specification (Fourth Revision)

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.0(Classification (as per Cl.6 of IS 302-2-3 and Cl.6.1 of IS 302-1))	-	500	-
7.0(Classification (as per Cl.6 of IS 302-2-3 and Cl.6.2 of IS 302-1))	-	500	-
9.0(Protection against access to live parts (as per Cl. 8 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Power input and current (as per Cl. 10 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Leakage current and Electric Strength at Operating Temperature (as per Cl. 13 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Leakage current and Electric Strength at Operating Temperature (as per Cl. 13 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Transient Overvoltage (as per of Cl. 14 of IS 302-2-3 and Table 6 of IS 302-1))	-	1000	-
9.0(Moisture Resistance (as per of Cl.15 of IS 302-2-3 and IS 302-1))	-	2000	-
9.0(Moisture Resistance (as per of Cl.15 of IS 302-2-3 and IS 302-1))	-	2000	-
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Staibilty and mechanical hazards (as per of Cl.20 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Mechanical strength (as per of Cl.21 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Components (as per of Cl.24 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Terminals for external conductors (as per of Cl.26 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Screw and connections (as per of Cl.28 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Screw and connections (as per of Cl.28 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Clearances, creepage distances and solid insulation (as per of Cl.29 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Clearances, creepage distances and solid insulation (as per of Cl.29 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Resistance to Heat and Fire (as per of Cl.30 of IS 302-2-3 and IS 302-1))	-	2000	-
9.0(Resistance to Rusting (as per of Cl.31 of IS 302-2-3 and IS 302-1))	-	1000	-
10.0(Measurement of Heating up time)	-	1000	-
10.0(Measurement of Heating up time)	-	1000	-
11.0(Measurement of sole plate temperature)	-	1000	-
11.0(Measurement of sole plate temperature)	-	1000	-
11.0(Measurement of sole plate temperature)	-	1000	-
11.0(Measurement of sole plate temperature)	-	1000	-
12.0(Measurement of Tempearture Distribution)	-	1000	-
13.0(Measurement of Initial overswing temperature and Heating up excess temperature)	-	1000	-
13.0(Measurement of Initial overswing temperature and Heating up excess temperature)	-	1000	-
16.0(Measurement of Thermostatic staibility)	-	1000	-
16.0(Measurement of Thermostatic staibility)	-	1000	-
16.0(Measurement of Thermostatic staibility)	-	1000	-
16.0(Measurement of Thermostatic staibility)	-	1000	-
16.0(Measurement of Thermostatic staibility)	-	1000	-
16.0(Measurement of Thermostatic staibility)	-	1000	-
7.0(Classification (as per Cl.6 of IS 302-2-3 and Cl.6.1 of IS 302-1))	-	1000	-
9.0(Protection against access to live parts (as per Cl. 8 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Power input and current (as per Cl. 10 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Leakage current and Electric Strength at Operating Temperature (as per Cl. 13 of IS 302-2-3 and IS 302-1))	-	2000	-
9.0(Leakage current and Electric Strength at Operating Temperature (as per Cl. 13 of IS 302-2-3 and IS 302-1))	-	2000	-
9.0(Transient Overvoltage (as per of Cl. 14 of IS 302-2-3 and Table 6 of IS 302-1))	-	1000	-
9.0(Moisture Resistance (as per of Cl.15 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Moisture Resistance (as per of Cl.15 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Staibilty and mechanical hazards (as per of Cl.20 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Mechanical strength (as per of Cl.21 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Components (as per of Cl.24 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Terminals for external conductors (as per of Cl.26 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Screw and connections (as per of Cl.28 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Screw and connections (as per of Cl.28 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Clearances, creepage distances and solid insulation (as per of Cl.29 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Clearances, creepage distances and solid insulation (as per of Cl.29 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Resistance to Heat and Fire (as per of Cl.30 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Resistance to Rusting (as per of Cl.31 of IS 302-2-3 and IS 302-1))	-	1000	-
10.0(Measurement of Heating up time)	-	1000	-
10.0(Measurement of Heating up time)	-	1000	-
11.0(Measurement of sole plate temperature)	-	1000	-
11.0(Measurement of sole plate temperature)	-	1000	-
11.0(Measurement of sole plate temperature)	-	1000	-
11.0(Measurement of sole plate temperature)	-	1000	-
12.0(Measurement of Tempearture Distribution)	-	1000	-
13.0(Measurement of Initial overswing temperature and Heating up excess temperature)	-	1000	-
13.0(Measurement of Initial overswing temperature and Heating up excess temperature)	-	1000	-
14.0(Measurement of Cyclic fluctuation of temperature of hottest point )	-	1000	-
16.0(Measurement of Thermostatic staibility)	-	1000	-
16.0(Measurement of Thermostatic staibility)	-	1000	-
16.0(Measurement of Thermostatic staibility)	-	1000	-
16.0(Measurement of Thermostatic staibility)	-	1000	-
16.0(Measurement of Thermostatic staibility)	-	1000	-
16.0(Measurement of Thermostatic staibility)	-	1000	-
6(Measurement of Thermostatic staibility)	-	1000	-
15(MEASUREMENT OF TEMPERATURE DROP UNDER LOAD)	-	1000	-
17(Measurement of Thermostatic staibility)	-	1000	-
16 of IS 302-2-3(Leakage current electric strength)	-	1000	-
4(GENERAL REQUIREMENTS)	-	1000	-
5(GENERAL NOTES ON TESTS)	-	1000	-
8(Marking)	-	1000	-
(Cl.8 of IS 366:1991 )(Marking and Instructions)	-	1000	-
(Cl.8 of IS 366:1991 )(Marking and Instructions)	-	1000	-
(Cl.8 of IS 366:1991 )(Marking and Instructions)	-	1000	-
(Cl.8 of IS 366:1991 )(Marking and Instructions)	-	1000	-
(Cl.11 of IS 302-2-3 :2007)(Heating)	-	1000	-
(Cl.22 of IS 302-2-3 :2007)(Construction)	-	1000	-
(Cl.22 of IS 302-2-3 :2007)(Construction)	-	1000	-
(Cl.32 of IS 302-2-3 :2007)(Radiation, Toxicity and similar)	-	1000	-
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	1000	-
14.0(Measurement of Cyclic fluctuation of temperature of hottest point )	-	1000	-
7.0(Classification (as per Cl.6 of IS 302-2-3 and Cl.6.2 of IS 302-1))	-	1000	-

31 Oct, 2028

-
Cl. 19.11.4.1 to Cl. 19.11.4.7 (EMI/EMC), Cl. 24, Cl. 32.2, Cl. 15.1.1(IPX7-8), Cl 12 as per IS 302-2-3, Steam Iron

3403

ACCURATE TEST SOLUTIONS LLP (F21), NOIDA

8141226

IS 16270 (2023)

Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

320000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Photovoltaic Energy System)	-	1000	5 % Discount for BIS.
Cl-4.2(Secondary Cells and Batteries)	-	1000	5 % Discount for BIS.
Cl-4.3(General Operating Conditions)	-	1000	5 % Discount for BIS.
Cl-4.3.8(Storage)	-	1000	5 % Discount for BIS.
Cl-4.3.9(Operating Temperature)	-	1000	5 % Discount for BIS.
Cl-5.1(Mechanical Endurance)	-	1000	5 % Discount for BIS.
Cl-5.2(Charge Efficiency)	-	1000	5 % Discount for BIS.
Cl-5.3(Deep Discharge Protection)	-	1000	5 % Discount for BIS.
Cl-5.4(Marking)	-	1000	5 % Discount for BIS.
Cl-5.5(Safety)	-	1000	5 % Discount for BIS.
Cl-5.6(Documentation)	-	1000	5 % Discount for BIS.
Cl-6(Functional characteristice)	-	1000	5 % Discount for BIS.
Cl-7(General test conditions)	-	1000	5 % Discount for BIS.
Cl-8.1(Capacity Test)	-	58000	5 % Discount for BIS.
Cl-8.2(Endurance Test)	-	40000	5 % Discount for BIS.
Cl-8.3(Charge Retention Test)	-	50000	5 % Discount for BIS.
Cl-8.4(Cycle Endurance in Photovoltaic Application (Extreme Conditions))	-	60000	5 % Discount for BIS.
Cl-8.5(Sulphation Test (Applicable for Lead Acid Batteries only))	-	50000	5 % Discount for BIS.
Cl-8.6(Water Loss Test (Valid for Flooded Lead Acid Batteries only))	-	45000	5 % Discount for BIS.
Cl-9.1(Type Tests)	-	1000	5 % Discount for BIS.
Cl-9.2(Acceptance Test)	-	1000	5 % Discount for BIS.
4.3.7.1(Specific gravity)	-	2000	5 % Discount for BIS.

04 Jul, 2027

-
Included w.e.f 18.07.2025

3404

DELHI TEST HOUSE (65) KUNDLI-2 SONIPAT

9138006

IS 3315 (2024)

Direct Evaporative Air Cooler â Specification (Fourth Revision)

75000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Enclosure)	-	4000	-
Cl-5.2(Filter Pads)	-	750	-
Cl-5.3(Sump Tank Capacities)	-	1500	-
Cl-5.4(Blower/Fan)	-	1000	-
Cl-5.4.3(Fan motor)	-	1000	-
Cl-5.5(Pump Set)	-	1000	-
Cl-5.6.1(Electrical wiring and connection)	-	2500	-
Cl-5.6.2(Suitable power cable)	-	1000	-
Cl-5.7(Switches)	-	250	-
Cl-6(Rating Requirement)	-	1000	-
Cl-8.1(Performance Requirement)	-	3000	-
Cl-8.2(Sound Test)	-	5000	-
Cl-8.3(Air Delivery (Air Flow) Test)	-	15000	-
Cl-8.4(Cooling Efficiency Test)	-	12000	-
Cl-8.5(Power Consumption)	-	2000	-
Cl-8.6(EER Calculation Method)	-	2000	-
Cl-8.7(Drop Test)	-	5000	-
Cl-8.8(Air Cooler Blower/Fan Reliability Test)	-	2000	-
Cl-12.2.1(General Running Tests)	-	1000	-
Cl-12.2.2(Protection against Electric Shock)	-	1500	-
Cl-12.2.3(High Voltage Tests)	-	2500	-
Cl-12.2.4(Leakage Current)	-	2500	-
Cl-12.2.5(Provision for Earthing)	-	2500	-
Cl-12.2.6(Finish)	-	1000	-
Cl-13(Additional Requirement for ECO-Mark)	-	1000	-
Cl-14(Storage)	-	3000	-

31 Dec, 2026

-
Included w.e.f.28.07.2025

3405

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 7404 : Part 1 (1991)

Paper covered copper conductors - Specification: Part 1 round conductors (First Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General test conditions )	-	100	-
5(Conductor )	-	500	-
5.1(Material )	-	1000	-
5.2(Diameter )	-	1000	-
6.1(Grade of Paper)	-	7000	-
7(Application of paper )	-	1500	-
8(Overall diameter and increase in diameter )	-	500	-
8.1(Double Paper Covering Ordinary (0) and Fine (F))	-	500	-
8.2(Multiple Paper Covering Special (S))	-	500	-
8.3(Measuring Equipment)	-	500	-
8.4(Measuring Method)	-	500	-
9(Packing and marking )	-	500	-
4(General test conditions )	-	0	-
5(Conductor )	-	0	-
5.1(Material )	-	0	-
5.2(Diameter )	-	0	-
6.1(Grade of Paper)	-	0	-
7(Application of paper )	-	0	-
8(Overall diameter and increase in diameter )	-	0	-
8.1(Double Paper Covering Ordinary (0) and Fine (F))	-	0	-
8.2(Multiple Paper Covering Special (S))	-	0	-
8.3(Measuring Equipment)	-	0	-
8.4(Measuring Method)	-	0	-
9(Packing and marking )	-	0	-
4(General test conditions )	-	0	-
5(Conductor )	-	0	-
5.1(Material )	-	0	-
5.2(Diameter )	-	0	-
6.1(Grade of Paper)	-	0	-
7(Application of paper )	-	0	-
8(Overall diameter and increase in diameter )	-	0	-
8.1(Double Paper Covering Ordinary (0) and Fine (F))	-	0	-
8.2(Multiple Paper Covering Special (S))	-	0	-
8.3(Measuring Equipment)	-	0	-
8.4(Measuring Method)	-	0	-
9(Packing and marking )	-	0	-
4(General test conditions )	-	0	-
5(Conductor )	-	0	-
5.1(Material )	-	0	-
5.2(Diameter )	-	0	-
6.1(Grade of Paper)	-	0	-
7(Application of paper )	-	0	-
8(Overall diameter and increase in diameter )	-	0	-
8.1(Double Paper Covering Ordinary (0) and Fine (F))	-	0	-
8.2(Multiple Paper Covering Special (S))	-	0	-
8.3(Measuring Equipment)	-	0	-
8.4(Measuring Method)	-	0	-
9(Packing and marking )	-	0	-

26 Jul, 2027

-
Included w.e.f. 31.07.2025

3406

Intertek India Private Limited (Food Services), Hyderabad

6126316

IS 13428 (2024)

PACKAGED NATURAL MINERAL WATER - SPECIFICATION Third Revision

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.1(Escherichia coli)	-	4000	Testing charges for Microbiological parameters - Rs4000
6.1.2(Coliform)	-	0	-
6.1.3(Faecal Streptococci)	-	0	-
6.1.4(Sulphite Reducing Anaerobe)	-	0	-
6.1.5(Pseudomonas aeruginosa)	-	0	-
6.1.6(Yeast and moould)	-	0	-
6.1.7(Salmonella)	-	0	-
6.1.8(Vibrio Cholera)	-	0	-
Cl-6.1.8(V. parahaemolyticus)	-	0	-
Cl-6.1.7(Shigella)	-	0	-
6.2/Table 1/i(Colour)	-	1000	Testing charges for proximate parameters Rs1000
6.2/Table 1/ii(Odour)	-	0	-
6.2/Table 1/iii(Taste)	-	0	-
6.2/Table 1/iv(Turbidity)	-	0	-
6.2/Table 1/v(Total Dissoved)	-	0	-
6.2/Table 1/vi(pH Value)	-	0	-
6.2/Table 2/i(Nitrate)	-	0	-
6.2/Table 2/ii(Nitrite)	-	0	-
6.2/Table 2/iii(Sulphide)	-	0	-
6.2/Table 2/iv(Manganese)	-	0	-
6.2/Table 2/v(Copper)	-	2600	Testing charges for Metals & minerals _ Rs 2600
6.2/Table 2/vi(Fluoride)	-	0	-
6.2/Table 2/vii(Barium)	-	0	-
6.2/Table 2/xi(Chloride)	-	0	-
6.2/Table 2/x(Silver)	-	0	-
6.2/Table 2/xii(Sulphate)	-	0	-
6.2/Table 2/xiii(Magnesium)	-	0	-
6.2/Table 2/xiv(Calcium)	-	0	-
6.2/Table 2/xv(Sodium)	-	0	-
6.2/Table 2/xvi(Alkalinity)	-	0	-
6.2/Table 2/xvii(Selenium)	-	0	-
6.2/Table 2/xviii(Mineral Oil)	-	0	-
6.2/Table 2/xix(Phenolic Compounds)	-	0	-
6.2/Table 2/xx(Anionic Surface active agents)	-	0	-
6.2/Table 3/i(Arsenic)	-	0	-
6.2/Table 3/ii(Cadmium)	-	0	-
6.2/Table 3/iii(Cyanide)	-	0	-
6.2/Table 3/iv(Chromium)	-	0	-
6.2/Table 3/v(Mercury)	-	0	-
6.2/Table 3/vi(Lead)	-	0	-
6.2/Table 3/vii(Nickel)	-	0	-
6.2/Table 3/x(Uranium)	-	0	-
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	3000	Testing charges for PCB Rs 3000
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	3000	Testing charges for PAH Rs 3000
Cl- 6.3, Annex N (i)(P,P -DDE)	-	4400	Testing charges for Pesticides Rs 4400
Cl- 6.3, Annex N (i)(O,P -DDE)	-	0	-
Cl- 6.3, Annex N (i)(P,P- DDT)	-	0	-
Cl- 6.3, Annex N (i)(O,P -DDT)	-	0	-
Cl-6.3, Annex N (i)(P,P- DDD)	-	0	-
Cl-6.3, Annex N (i)(O,P-DDD)	-	0	-
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	0	-
Cl- 6.3, Annex N (iii)(α-HCH)	-	0	-
Cl- 6.3, Annex N (iii)(β-HCH)	-	0	-
Cl- 6.3, Annex N (iii)(δ - HCH)	-	0	-
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	0	-
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	0	-
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	0	-
Cl- 6.3, Annex N (v)(Monocrotophos)	-	0	-
Cl- 6.3, Annex N (vi)(Ethion)	-	0	-
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	0	-
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	0	-
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	0	-
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	0	-
Cl- 6.3, Annex N (ix)(2,4-D)	-	0	-
Cl- 6.3, Annex N (x)(Butachlor)	-	0	-
Cl- 6.3, Annex N (xi)(Isoproturon)	-	0	-
Cl- 6.3, Annex N (xii)(Alachlor)	-	0	-
Cl- 6.3, Annex N (xiii)(Atrazine)	-	0	-
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	0	-
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	0	-
Cl- 6.3, Annex N (xv)(Malathion)	-	0	-
Cl- 6.3, Annex N (xvi)(Aldrin)	-	0	-
Cl-6.3, Annex N (XVI)(Dieldrin)	-	0	-
Cl-6.1.3(Staphylococcus aureus)	-	0	-
Cl- 6.3, Annex N (xv)(malaoxon)	-	0	-
6.2/Table 2/viii(Antimony)	-	0	-
6.2/Table 2/ix(Borate)	-	0	-
6.1.1(Escherichia coli)	-	-	-
6.1.2(Coliform)	-	-	-
6.1.3(Faecal Streptococci)	-	-	-
6.1.4(Sulphite Reducing Anaerobe)	-	-	-
6.1.5(Pseudomonas aeruginosa)	-	-	-
6.1.6(Yeast and moould)	-	-	-
6.1.7(Salmonella)	-	-	-
6.1.8(Vibrio Cholera)	-	-	-
Cl-6.1.8(V. parahaemolyticus)	-	-	-
Cl-6.1.7(Shigella)	-	-	-
6.2/Table 1/i(Colour)	-	-	-
6.2/Table 1/ii(Odour)	-	-	-
6.2/Table 1/iii(Taste)	-	-	-
6.2/Table 1/iv(Turbidity)	-	-	-
6.2/Table 1/v(Total Dissoved)	-	-	-
6.2/Table 1/vi(pH Value)	-	-	-
6.2/Table 2/i(Nitrate)	-	-	-
6.2/Table 2/ii(Nitrite)	-	-	-
6.2/Table 2/iii(Sulphide)	-	-	-
6.2/Table 2/iv(Manganese)	-	-	-
6.2/Table 2/v(Copper)	-	-	-
6.2/Table 2/vi(Fluoride)	-	-	-
6.2/Table 2/vii(Barium)	-	-	-
6.2/Table 2/xi(Chloride)	-	-	-
6.2/Table 2/x(Silver)	-	-	-
6.2/Table 2/xii(Sulphate)	-	-	-
6.2/Table 2/xiii(Magnesium)	-	-	-
6.2/Table 2/xiv(Calcium)	-	-	-
6.2/Table 2/xv(Sodium)	-	-	-
6.2/Table 2/xvi(Alkalinity)	-	-	-
6.2/Table 2/xvii(Selenium)	-	-	-
6.2/Table 2/xviii(Mineral Oil)	-	-	-
6.2/Table 2/xix(Phenolic Compounds)	-	-	-
6.2/Table 2/xx(Anionic Surface active agents)	-	-	-
6.2/Table 3/i(Arsenic)	-	-	-
6.2/Table 3/ii(Cadmium)	-	-	-
6.2/Table 3/iii(Cyanide)	-	-	-
6.2/Table 3/iv(Chromium)	-	-	-
6.2/Table 3/v(Mercury)	-	-	-
6.2/Table 3/vi(Lead)	-	-	-
6.2/Table 3/vii(Nickel)	-	-	-
6.2/Table 3/x(Uranium)	-	-	-
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	-	-
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	-	-
Cl- 6.3, Annex N (i)(P,P -DDE)	-	-	-
Cl- 6.3, Annex N (i)(O,P -DDE)	-	-	-
Cl- 6.3, Annex N (i)(P,P- DDT)	-	-	-
Cl- 6.3, Annex N (i)(O,P -DDT)	-	-	-
Cl-6.3, Annex N (i)(P,P- DDD)	-	-	-
Cl-6.3, Annex N (i)(O,P-DDD)	-	-	-
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	-	-
Cl- 6.3, Annex N (iii)(α-HCH)	-	-	-
Cl- 6.3, Annex N (iii)(β-HCH)	-	-	-
Cl- 6.3, Annex N (iii)(δ - HCH)	-	-	-
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	-	-
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	-	-
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	-	-
Cl- 6.3, Annex N (v)(Monocrotophos)	-	-	-
Cl- 6.3, Annex N (vi)(Ethion)	-	-	-
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	-	-
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	-	-
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	-	-
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	-	-
Cl- 6.3, Annex N (ix)(2,4-D)	-	-	-
Cl- 6.3, Annex N (x)(Butachlor)	-	-	-
Cl- 6.3, Annex N (xi)(Isoproturon)	-	-	-
Cl- 6.3, Annex N (xii)(Alachlor)	-	-	-
Cl- 6.3, Annex N (xiii)(Atrazine)	-	-	-
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	-	-
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	-	-
Cl- 6.3, Annex N (xv)(Malathion)	-	-	-
Cl- 6.3, Annex N (xvi)(Aldrin)	-	-	-
Cl-6.3, Annex N (XVI)(Dieldrin)	-	-	-
Cl-6.1.3(Staphylococcus aureus)	-	-	-
Cl- 6.3, Annex N (xv)(malaoxon)	-	-	-
6.2/Table 2/viii(Antimony)	-	-	-
6.2/Table 2/ix(Borate)	-	-	-

18 Mar, 2028

-
-

3407

KSA LABS LLP, Vadodara

7186606

IS 11652 (2017)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg cement – Specification (third revision)

All

29000 View breakup
-

Clause No.	Exclusion	Remark
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	-
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	-
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	-
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	-
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	-
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	-
4.1(Raw Material )	-	-
4.2 (Fabric)	-	-
4.2 (Linear Density, 900 denier)	-	-
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	-
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	-
4.3(Sacks)	-	-
4.4(Seam )	-	-
4.4(Seam )	-	-
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	-
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	-
4.4(Seam The stitching shall be done with double fold over seam to)	-	-
4.4(to a depth of minimum 25 mm, so that so that)	-	-
4.4(The number of stitches/dm shall be 14 ± 2.)	-	-
4.4(Seam)	-	-
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	-
4.4(Seam)	-	-
4.4(Seam)	-	-
4.4(Seam)	-	-
4.5(Lamination )	-	-
4.5(Lamination )	-	-
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	-
4.5(Lamination )	-	-
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	-
4.7(Valve for Filling of Sacks)	-	-
4.7(There shall be a double fold at the top seam and)	-	-
4.7(and then stitching shall be done through six layers.)	-	-
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	-
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	-
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	-
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	-
5/5.6 (UV Resistance, )	-	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	-
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	-
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	-
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	-
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	-
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	-
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	-
4.1(Raw Material )	-	-
4.2 (Fabric)	-	-
4.2 (Linear Density, 900 denier)	-	-
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	-
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	-
4.3(Sacks)	-	-
4.4(Seam )	-	-
4.4(Seam )	-	-
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	-
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	-
4.4(Seam The stitching shall be done with double fold over seam to)	-	-
4.4(to a depth of minimum 25 mm, so that so that)	-	-
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	-
4.4(The number of stitches/dm shall be 14 ± 2.)	-	-
4.4(Seam)	-	-
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	-
4.4(Seam)	-	-
4.4(Seam)	-	-
4.4(Seam)	-	-
4.5(Lamination )	-	-
4.5(Lamination )	-	-
4.5(Lamination )	-	-
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	-
4.7(Valve for Filling of Sacks)	-	-
4.7(There shall be a double fold at the top seam and)	-	-
4.7(and then stitching shall be done through six layers.)	-	-
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	-
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	-
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	-
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	-
5/5.6 (UV Resistance, )	-	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	-
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	-
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	-
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	-
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	-
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	-
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	-
4.1(Raw Material )	-	-
4.2 (Fabric)	-	-
4.2 (Linear Density, 900 denier)	-	-
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	-
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	-
4.3(Sacks)	-	-
4.4(Seam )	-	-
4.4(Seam )	-	-
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	-
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	-
4.4(Seam The stitching shall be done with double fold over seam to)	-	-
4.4(to a depth of minimum 25 mm, so that so that)	-	-
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	-
4.4(The number of stitches/dm shall be 14 ± 2.)	-	-
4.4(Seam)	-	-
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	-
4.4(Seam)	-	-
4.4(Seam)	-	-
4.4(Seam)	-	-
4.5(Lamination )	-	-
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	-
4.5(Lamination )	-	-
4.5(Lamination )	-	-
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	-
4.7(Valve for Filling of Sacks)	-	-
4.7(There shall be a double fold at the top seam and)	-	-
4.7(and then stitching shall be done through six layers.)	-	-
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	-
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	-
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	-
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	-
5/5.6 (UV Resistance, )	-	-
4.4(Seam The stitching shall be done with double fold over seam to)	-	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	-
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	-
Cl-5 Fig. 1- Table 1- Sr. no. ii(Ends per dm - Annex B 40 ± 2)	-	-
Cl-5 Fig. 1- Table 1-Sr. no. iii(Picks per dm-Annex B 40 ± 2)	-	-
Cl-5, Fig. 1- Table 1- Sr. no. i(Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm)	-	-
Cl-5, Fig. 1- Table 1- Sr. no. i(Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm)	-	-
Cl-5, Fig. 1- Table 1-Sr. no. i(Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm)	-	-
Cl-5, Fig. 1, Table 1(i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm)	-	-
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	-
4.1(Raw Material )	-	-
4.2 (Fabric)	-	-
4.2 (Linear Density, 900 denier)	-	-
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	-
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	-
4.4(Seam )	-	-
4.4(Seam )	-	-
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	-
4.4(to a depth of minimum 25 mm, so that so that)	-	-
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	-
4.4(The number of stitches/dm shall be 14 ± 2.)	-	-
4.4(Seam)	-	-
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	-
4.4(Seam)	-	-
4.4(Seam)	-	-
4.4(Seam)	-	-
4.5(Lamination )	-	-
4.5(Lamination )	-	-
4.5(Lamination )	-	-
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	-
4.7(Valve for Filling of Sacks)	-	-
4.7(There shall be a double fold at the top seam and)	-	-
4.7(and then stitching shall be done through six layers.)	-	-
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	-
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	-
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	-
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	-
5/5.6 (UV Resistance, )	-	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	-
4.3(Sacks)	-	-

24 Jun, 2028

-
-

3408

KSA LABS LLP, Vadodara

7186606

IS 4990 (2024)

PLYWOOD FOR CONCRETE SHUTTERING WORKS SPECIFICATION (Fourth Revision)

All

18000 View breakup
-

Clause No.	Exclusion	Remark
Cl-5.1(Timber)	-	-
Cl-5.2(Adhesives for Bonding of Veneers)	-	-
Cl-6.1(Manufacture)	-	-
Cl-6.2(Manufacture ( Thickness of veneers))	-	-
Cl-6.3(Manufacture ( Physical and mechanical properties of veneers))	-	-
Cl-6.5(Manufacture (Scarf joints))	-	-
Cl-7.1(Dimensions -length)	-	-
Cl-7.2(Thickness)	-	-
Cl-7.3(Squareness)	-	-
Cl-6.6(Manufacture ( Preservative treatment))	-	-
Cl-8.1, 8.2(Workmanship and finish)	-	-
Cl-10.3(Moisture Content)	-	-
Cl-10.4.1(Glue Adhesion in Dry State - Glue Shear Strength)	-	-
Cl-10.4.2(Glue Adhesion in Dry State - Adhesion of Plies)	-	-
Cl-10.5, 10.5.1(Resistance to Water Test)	-	-
Cl-10.5.1.1(Water Resistance Test-Glue shear strength)	-	-
Cl-10.5.1.2(Water Resistance Test-Adhesion of plies)	-	-
Cl-10.5.2(Water Resistance Test (Alternate method))	-	-
Cl-10.6(Water resistance test (Concrete shuttering Plywood))	-	-
Cl-10.7.1, Table-2(Mycological Test- Glue shear strengt)	-	-
Cl-10.7.2(Mycological Test- Adhesion of plies)	-	-
Cl-10.8(Tensile Strength)	-	-
Cl-10.9, Table-3 (i)(Along (parallel to the grain direction of the face veneer))	-	-
Cl-10.9, Table-3 (ii)(Across (perpendicular to the grain direction of the face veneer))	-	-
Cl-10.10, Table-4 (i) a(Wet Bending Strength -Modulus of Elasticity (MOE),- Average)	-	-
Cl-10.10, Table-4 (i) b(Wet Bending Strength - Modulus of Elasticity (MOE),- Minimum individual)	-	-
Cl-10.11(Retention of Preservative)	-	-
Cl-10.12(Formaldehyde Content Test)	-	-
Cl-6.4, 6.7(Manufacture (Plywood for concrete shuttering))	-	-

24 Jun, 2028

-
Exclusion: Cl-10.13 (Steady-State Formaldehyde Emission Test) Cl 10.5.2 Annex-D Alternate method for Water Resistance Test

3409

KSA LABS LLP, Vadodara

7186606

IS 710 (2024)

MARINE PLYWOOD - SPECIFICATION (Third Revision)

All

15000 View breakup
-

Clause No.	Exclusion	Remark
Cl-4.1(Timber)	-	-
Cl-4.2(Adhesive)	-	-
Cl-5.1(Veneers)	-	-
Cl-5.2.1(Glueing)	-	-
Cl -5.2.2(Thickness of Veneers)	-	-
Cl - 5.2.3.1(Joint in Veneers)	-	-
Cl - 5.2.3.2(Edge joints)	-	-
Cl - 5.2.3.3(End joints)	-	-
Cl - 5.2.3.4(Scarf joints)	-	-
Cl - 5.2.4(Grain Direction)	-	-
Cl-5.3(Treatment)	-	-
Cl-5.4(Moisture Content)	-	-
Cl-6.1(Dimensions (length))	-	-
Cl-6.2(Thickness)	-	-
Cl-6.3(Squareness)	-	-
Cl-7.1, 7.2, 7.3, 7.4, 7.5 & 7.6(Workmanship and finish)	-	-
Cl-9.3(Moisture Content)	-	-
Cl-9.4.2(Glue Adhesion in Dry State- Adhesion of Plies)	-	-
Cl-9.4.1(Glue Adhesion in Dry State- Glue Shear Strength -Average)	-	-
Cl-9.5.1.1(Glue Adhesion in Water Resistance - Glue Shear Strength -Average)	-	-
Cl-9.5.1.2(Water Resistance Test-Adhesion of plies)	-	-
Cl-9.5.2(Water Resistance Test)	-	-
Cl-9.6(Tensile Strength-Along the grain)	-	-
Cl-9.7(Mycological Test -Adhesion)	-	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	-
Cl-9.9, Table-3 (i) a(Wet Bending Strength- Modulus of Elasticity (MOE)- Average)	-	-
Cl-9.9, Table-3 (i) b(Wet Bending Strength- Modulus of Elasticity (MOE),-Minimum individual)	-	-
Cl-9.10(Retention of Preservative)	-	-
Cl-9.11(Formaldehyde Content Test)	-	-
Cl-9.4.2(Adhesion of Plies)	-	-
5.1.1(Defects in veneers)	-	-

24 Jun, 2028

-
Exclusion: Cl-9.12 (Steady-State Formaldehyde Emission Test) Cl 9.5.2 Annex-D Alternate method for Water Resistance Test

3410

KSA LABS LLP, Vadodara

7186606

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

ALL

12000 View breakup
-

Clause No.	Exclusion	Remark
Cl-5.1(Classification by appearance)	-	-
Cl-5.2, Table- 1 (i)(Blister)	-	-
Cl-5.2, Table- 1 (ii)(Checks)	-	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	-
Cl-5.2, Table- 1 (iv)(Dote)	-	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	-
Cl-5.2, Table- 1 (vi)(Joints)	-	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	-
Cl-5.2, Table- 1 (xi)(Patches)	-	-
Cl-5.2, Table- 1 (xii)(Splits)	-	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	-
Cl-6.1(Timber)	-	-
Cl-7.2.1(Thickness of veneers)	-	-
Cl-7.2.3(Grain Direction)	-	-
Cl-6.2(Adhesive)	-	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	-
Cl-7.2.5.2(Splits)	-	-
Cl-7.2.5.3(Overlap)	-	-
Cl-8.1(Dimensions -length)	-	-
Cl-8.2(Thickness of the plywood boards)	-	-
Cl-8.3(Squareness)	-	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	-
Cl-11.3.2(Mycological Test)	-	-
Cl-11.4(Moisture Content)	-	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	-
Cl-11.6(Formaldehyde Content Test)	-	-
Cl-9(WORKMANSHIP AND FINISH)	-	-
Cl-7.2.4(Scarf Joints)	-	-

24 Jun, 2028

-
Exclusion: Cl-11.7 (Steady-State Formaldehyde Emission Test)

3411

KSA LABS LLP, Vadodara

7186606

IS 1659 (2004)

Block boards - Specification (Fourth Revision)

Grade BWP & MR

9500 View breakup
-

Clause No.	Exclusion	Remark
9.2.6(Spot test - Annexure L)	-	-
9.2.5(Modulus of elasticity - MINIMUM INDIVIDUAL - Annexure K)	-	-
9.2.5(Modulus of elasticity - AVERAGE - Annexure K)	-	-
9.2.5(Modulus of rupture - MINIMUM INDIVIDUAL - Annexure K)	-	-
9.2.5(Modulus of rupture - AVERAGE - Annexure K)	-	-
9.2.3(Adhesion of Plies - Annexure H)	-	-
9.2.4(Mycological Test [for MR grade only] - Annexure J)	-	-
9.2.2 (Resistance to water - Annexure G, Annexure H [For MR Grade])	-	-
9.2.2 (Resistance to water - Annexure G, Annexure H [For BWP grade])	-	-
9.2.1(Dimensional Changes caused by humidity Change in local planeness - Annexure F)	-	-
9.2.1(Dimensional Changes caused by humidity - Delamination - Annexure F)	-	-
9.2.1(Dimensional Changes caused by humidity - Change in thickness - at 40% RH - Annexure F)	-	-
9.2.1(Dimensional Changes caused by humidity - Change in Thickness - at 90% RH - Annexure F)	-	-
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 40% RH - Annexure F)	-	-
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 90% RH - Annexure F)	-	-
7.3(Dimensional Requirements - Variation in thickness - Annexure E)	-	-
7.3(Dimensional Requirements - Squareness - Annexure D)	-	-
7.3(Dimensional Requirements - Edge Straightness - Annexure D)	-	-
7.3(Dimensional Requirements - Thickness - Annexure E)	-	-
7.3(Dimensional Requirements - Width - 8.1.4)	-	-
7.3(Dimensional Requirements - Length - 8.1.4)	-	-
8.1.3, 6.3.3, IS 1328(Visual Inspection - Permissible Defects - IS 1328 [test method for DECORATIVE type])	-	-
8.1.3, 6.3.3, IS 303(Visual Inspection - Permissible Defects - IS 303 [test method for COMMERCIAL type])	-	-
9.2.6 (mechanical)(Spot test - Annexure L)	-	-
cl. 11(marking)	-	-
cl. 11.1(marking - BIS certification marking)	-	-
6.2(Core- Moisture & Width)	-	-
6.3(Cross Bands and Faces- Moisture content)	-	-
6.3.1(Thickness of cross band and face veneers)	-	-
Cl-7.1(Thickness)	-	-
Cl-7.2(Sizes)	-	-

24 Jun, 2028

-
-

3412

KSA LABS LLP, Vadodara

7186606

IS 848 (2006)

Synthetic resin adhesives for plywood (Phenolic And Aminoplastic) - Specification (Second Revision)

BWP,BWR,MR Liquid Resin,Powder Resin, Film Adhesive

7400 View breakup
-

Clause No.	Exclusion	Remark
4 Table (i)(BWP (BOiling WaterProof))	-	-
4 Table (i)(BWR (Boiling Water Resistant))	-	-
4 Table (i)(MR (Moisture Ressistant))	-	-
7.4(Acidity and Alkalinity ( pH))	-	-
5,7.4(Keeping Quality (Resistance to heat Polymerization))	-	-

24 Jun, 2028

-
-

3413

Standard Testing Laboratory Private Limited

8170106

IS 6527 (1995)

Stainless steel wire rods - Specification (First Revision)

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Heat Treatment)	-	8000	-
Cl 9(Tensile & Hardness)	-	8000	-
Cl 10(Diameter & Out Of Round)	-	8000	-
Cl 8(Heat Treatment)	-	8000	-
Cl 9(Tensile & Hardness)	-	8000	-
Cl 10(Diameter & Out Of Round)	-	8000	-
Cl 8(Heat Treatment)	-	8000	-
Cl 9(Tensile & Hardness)	-	8000	-
Cl 10(Diameter & Out Of Round)	-	8000	-
10 & 10.1, Dia over 20 mm (Out of round)	-	8000	-
10 & 10.1, Dia over 20 mm (Size, Tolerance)	-	8000	-
10 & 10.1, Dia over 16 mm upto 20 mm (Out of round)	-	8000	-
10 & 10.1, Dia over 16 mm upto 20 mm (Size, Tolerance)	-	8000	-
10 & 10.1, Dia over 9.5 mm upto 16 mm (Out of round)	-	8000	-
10 & 10.1, Dia over 9.5 mm upto 16 mm (Size, Tolerance)	-	8000	-
10 & 10.1, Dia- (5.5-9.5 mm)(Out of round)	-	8000	-
10 & 10.1, Dia- (5.5-9.5 mm)(Size, Tolerance)	-	8000	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr17Ni12Mo2)(Hardness)	-	8000	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr17Ni12Mo2)(%Elongation)	-	8000	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr17Ni12Mo2)(Ultimate Tensile Strength)	-	8000	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr17Ni12Mo2)(0.2% Proof Stress)	-	8000	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr17Ni12Mo2)(Hardness)	-	8000	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr17Ni12Mo2)(%Elongation)	-	8000	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr17Ni12Mo2)(Ultimate Tensile Strength)	-	8000	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr17Ni12Mo2)(0.2% Proof Stress)	-	8000	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr17Ni12Mo2)(Hardness)	-	8000	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr17Ni12Mo2)(%Elongation)	-	8000	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr17Ni12Mo2)(Ultimate Tensile Strength)	-	8000	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr17Ni12Mo2)(0.2% Proof Stress)	-	8000	-
9, Table 3 & 4 of IS:6527 (Designation X07Cr18Ni9)(Hardness)	-	8000	-
9, Table 3 & 4 of IS:6527 (Designation X07Cr18Ni9)(%Elongation)	-	8000	-
9, Table 3 & 4 of IS:6527 (Designation X07Cr18Ni9)(Ultimate Tensile Strength)	-	8000	-
9, Table 3 & 4 of IS:6527 (Designation X07Cr18Ni9)(0.2% Proof Stress)	-	8000	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr18Ni10)(Hardness)	-	8000	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr18Ni10)(%Elongation)	-	8000	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr18Ni10)(Ultimate Tensile Strength)	-	8000	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr18Ni10)(0.2% Proof Stress)	-	8000	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr18Ni11)(Hardness)	-	8000	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr18Ni11)(%Elongation)	-	8000	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr18Ni11)(Ultimate Tensile Strength)	-	8000	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr18Ni11)(0.2% Proof Stress)	-	8000	-
9, Table 3 & 4 of IS:6527 (Designation X30Cr13)(Hardness)	-	8000	-
9, Table 3 & 4 of IS:6527 (Designation X30Cr13)(Ultimate Tensile Strength)	-	8000	-
9, Table 3 & 4 of IS:6527 (Designation X20Cr13)(Hardness)	-	8000	-
9, Table 3 & 4 of IS:6527 (Designation X20Cr13)(Ultimate Tensile Strength)	-	8000	-
9, Table 3 & 4 of IS:6527 (Designation X12Cr13)(Hardness)	-	8000	-
9, Table 3 & 4 of IS:6527 (Designation X12Cr13)(%Elongation)	-	8000	-
9, Table 3 & 4 of IS:6527 (Designation X12Cr13)(Ultimate Tensile Strength)	-	8000	-
9, Table 3 & 4 of IS:6527 (Designation X12Cr13)(0.2% Proof Stress)	-	8000	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr13)(Hardness)	-	8000	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr13)(%Elongation)	-	8000	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr13)(Ultimate Tensile Strength)	-	8000	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr13)(0.2% Proof Stress)	-	8000	-
8(Steel Wire rod may be supplied in the annealed condition.)	-	8000	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Titanium)	-	8000	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Niobium)	-	8000	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Molybdenum)	-	8000	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Copper)	-	8000	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Nitrogen)	-	8000	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Phosphorous)	-	8000	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Sulphur)	-	8000	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Chromium)	-	8000	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Nickel)	-	8000	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Manganese)	-	8000	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Silicon)	-	8000	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Carbon)	-	8000	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Titanium)	-	8000	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Niobium)	-	8000	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Molybdenum)	-	8000	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Copper)	-	8000	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Phosphorous)	-	8000	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Sulphur)	-	8000	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Chromium)	-	8000	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Nickel)	-	8000	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Manganese)	-	8000	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Silicon)	-	8000	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Carbon)	-	8000	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Titanium)	-	8000	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Niobium)	-	8000	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Molybdenum)	-	8000	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Copper)	-	8000	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Phosphorous)	-	8000	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Sulphur)	-	8000	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Chromium)	-	8000	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Nickel)	-	8000	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Manganese)	-	8000	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Silicon)	-	8000	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Carbon)	-	8000	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Titanium)	-	8000	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Niobium)	-	8000	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Molybdenum)	-	8000	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Copper)	-	8000	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Phosphorous)	-	8000	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Sulphur)	-	8000	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Chromium)	-	8000	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Nickel)	-	8000	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Manganese)	-	8000	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Silicon)	-	8000	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Carbon)	-	8000	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Titanium)	-	8000	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Niobium)	-	8000	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Molybdenum)	-	8000	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Copper)	-	8000	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Phosphorous)	-	8000	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Sulphur)	-	8000	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Chromium)	-	8000	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Nickel)	-	8000	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Manganese)	-	8000	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Silicon)	-	8000	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Carbon)	-	8000	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Titanium)	-	8000	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Niobium)	-	8000	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Molybdenum)	-	8000	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Copper)	-	8000	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Phosphorous)	-	8000	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Sulphur)	-	8000	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Chromium)	-	8000	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Nickel)	-	8000	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Manganese)	-	8000	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Silicon)	-	8000	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Carbon)	-	8000	-
7, Table 1of IS:6527 (Designation X30Cr13)(Molybdenum)	-	8000	-
7, Table 1of IS:6527 (Designation X30Cr13)(Copper)	-	8000	-
7, Table 1of IS:6527 (Designation X30Cr13)(Phosphorous)	-	8000	-
7, Table 1of IS:6527 (Designation X30Cr13)(Sulphur)	-	8000	-
7, Table 1of IS:6527 (Designation X30Cr13)(Chromium)	-	8000	-
7, Table 1of IS:6527 (Designation X30Cr13)(Nickel)	-	8000	-
7, Table 1of IS:6527 (Designation X30Cr13)(Manganese)	-	8000	-
7, Table 1of IS:6527 (Designation X30Cr13)(Silicon)	-	8000	-
7, Table 1of IS:6527 (Designation X30Cr13)(Carbon)	-	8000	-
7, Table 1of IS:6527 (Designation X20Cr13)(Molybdenum)	-	8000	-
7, Table 1of IS:6527 (Designation X20Cr13)(Copper)	-	8000	-
7, Table 1of IS:6527 (Designation X20Cr13)(Phosphorous)	-	8000	-
7, Table 1of IS:6527 (Designation X20Cr13)(Sulphur)	-	8000	-
7, Table 1of IS:6527 (Designation X20Cr13)(Chromium)	-	8000	-
7, Table 1of IS:6527 (Designation X20Cr13)(Nickel)	-	8000	-
7, Table 1of IS:6527 (Designation X20Cr13)(Manganese)	-	8000	-
7, Table 1of IS:6527 (Designation X20Cr13)(Silicon)	-	8000	-
7, Table 1of IS:6527 (Designation X20Cr13)(Carbon)	-	8000	-
7, Table 1of IS:6527 (Designation X12Cr13)(Molybdenum)	-	8000	-
7, Table 1of IS:6527 (Designation X12Cr13)(Copper)	-	8000	-
7, Table 1of IS:6527 (Designation X12Cr13)(Phosphorous)	-	8000	-
7, Table 1of IS:6527 (Designation X12Cr13)(Sulphur)	-	8000	-
7, Table 1of IS:6527 (Designation X12Cr13)(Chromium)	-	8000	-
7, Table 1of IS:6527 (Designation X12Cr13)(Nickel)	-	8000	-
7, Table 1of IS:6527 (Designation X12Cr13)(Manganese)	-	8000	-
7, Table 1of IS:6527 (Designation X12Cr13)(Silicon)	-	8000	-
7, Table 1of IS:6527 (Designation X12Cr13)(Carbon)	-	8000	-
7, Table 1of IS:6527 (Designation X04Cr13)(Molybdenum)	-	8000	-
7, Table 1of IS:6527 (Designation X04Cr13)(Copper)	-	8000	-
7, Table 1of IS:6527 (Designation X04Cr13)(Aluminium)	-	8000	-
7, Table 1of IS:6527 (Designation X04Cr13)(Phosphorous)	-	8000	-
7, Table 1of IS:6527 (Designation X04Cr13)(Sulphur)	-	8000	-
7, Table 1of IS:6527 (Designation X04Cr13)(Chromium)	-	8000	-
7, Table 1of IS:6527 (Designation X04Cr13)(Nickel)	-	8000	-
7, Table 1of IS:6527 (Designation X04Cr13)(Manganese)	-	8000	-
7, Table 1of IS:6527 (Designation X04Cr13)(Silicon)	-	8000	-
7, Table 1of IS:6527 (Designation X04Cr13)(Carbon)	-	8000	-
6(The wire rods shall be smooth on surface and free from harmful surface defects)	-	8000	-
Cl. 10.1(Out of Round)	-	8000	-
Cl. 9.2 Table 4(Hardness)	-	8000	-
Cl. 9 .1 Table 3(Elongation)	-	8000	-
Cl. 9 .1 Table 3(0.2 % Proof Stress )	-	8000	-
Cl. 6(Freedom from defects)	-	8000	-
Cl 10(Diameter & Out Of Round)	-	8000	-
Cl 9(Tensile & Hardness)	-	8000	-
Cl 8(Heat Treatment)	-	8000	-
Cl 8(Heat Treatment)	-	8000	-
Cl 9(Tensile & Hardness)	-	8000	-
Cl 10(Diameter & Out Of Round)	-	8000	-
13(Corrosion resistance-IS 10461,Part-1 & 2)	-	8000	-
13(Corrosion Resistance - IS 10461)	-	8000	-
15(Marking)	-	8000	-

10 Apr, 2028

-
Included w.e.f 28.10.2025

3414

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 15911 (2010)

Structural steel (Ordinary Quality) - Specification

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table-1, 5.1, 8.1 & 8.2(Carbon: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	9500	For complete testing
Table-1, 5.1, 8.1 & 8.2(Sulphur: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	9500	For complete testing
Table-1, 5.1, 8.1 & 8.2(Phosphorous: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	9500	For complete testing
Table-1, 5.1, 8.1 & 8.2(Manganese: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	9500	For complete testing
Table-1, 5.1, 8.1 & 8.2(Silicon: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	9500	For complete testing
Table-1, 5.1, 8.1 & 8.2(Chromium: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	9500	For complete testing
Table-1, 5.1, 8.1 & 8.2(Molybdenum: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	9500	For complete testing
Table-1, 5.1, 8.1 & 8.2(Vanadium: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	9500	For complete testing
Table-1, 5.1, 8.1 & 8.2(Nickel: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	9500	For complete testing
Table-1, 5.1, 8.1 & 8.2(Copper: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	9500	For complete testing
Table-1, 5.1, 8.1 & 8.2(Aluminium: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	9500	For complete testing
Table-1, 5.1, 8.1 & 8.2(Nitrogen: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	9500	For complete testing
Table-1, 5.1, 8.1 & 8.2(Niobium: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	9500	For complete testing
Table-1, 5.1, 8.1 & 8.2(Titanium: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	9500	For complete testing
Table-1, 5.1, 8.1 & 8.2(Boron: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	9500	For complete testing
7(Freedom from defects)	-	9500	For complete testing
5 and 10.3.1(Tensile strength. IS 1608)	-	9500	For complete testing
5 and 10.3.1(Yield Stress. IS 1608)	-	9500	For complete testing
5 and 10.3.1(Percentage Elongation. . IS 1608)	-	9500	For complete testing
5 and 10.3.1(Internal Bend Diameter)	-	9500	For complete testing
11.3( Bend Test. IS 1599)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 2.1 of IS 808(Mass. IS 808)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 2.1 of IS 808(Sectional Area. IS 808)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 2.1 of IS 808(D)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 2.1 of IS 808(B)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 2.1 of IS 808(t)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 2.1 of IS 808(T)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 2.1 of IS 808(Flange Slop, Max α , )	-	9500	For complete testing
Cl 12 of IS 15911 and Table 2.1 of IS 808(R1)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 2.1 of IS 808(R2)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 2.1 of IS 808(Ix)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 2.1 of IS 808(Iy)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 2.1 of IS 808(rx)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 2.1 of IS 808(ry)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 2.1 of IS 808(Zx)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 2.1 of IS 808(Zy)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 2.2 of IS 808(Mass. IS 808)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 2.1 of IS 808(Sectional Area. IS 808)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 2.1 of IS 808(D)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 2.1 of IS 808(B)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 2.1 of IS 808(t)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 2.1 of IS 808(T)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 2.1 of IS 808(Flange Slop, Max α , )	-	9500	For complete testing
Cl 12 of IS 15911 and Table 2.1 of IS 808(R1)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 2.1 of IS 808(R2)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 2.1 of IS 808(Ix)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 2.1 of IS 808(Iy)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 2.1 of IS 808(rx)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 2.1 of IS 808(ry)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 2.1 of IS 808(Zx)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 2.1 of IS 808(Zy)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 3.1 of IS 808(Mass. IS 808)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 3.1 of IS 808(Sectional Area. IS 808)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 3.1 of IS 808(D)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 3.1 of IS 808(B)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 3.1 of IS 808(t)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 3.1 of IS 808(T)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 3.1 of IS 808(Flange Slop, Max α , )	-	9500	For complete testing
Cl 12 of IS 15911 and Table 3.1 of IS 808(R1)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 3.1 of IS 808(R2)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 3.1 of IS 808(Ix)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 3.1 of IS 808(Iy)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 3.1 of IS 808(rx)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 3.1 of IS 808(ry)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 3.1 of IS 808(Zx)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 3.1 of IS 808(Zy)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 4.1 of IS 808(Mass. IS 808)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 4.1 of IS 808(Sectional Area. IS 808)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 4.1 of IS 808(D)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 4.1 of IS 808(B)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 4.1 of IS 808(t)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 4.1 of IS 808(T)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 4.1 of IS 808(Flange Slop, Max α , )	-	9500	For complete testing
Cl 12 of IS 15911 and Table 4.1 of IS 808(R1)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 4.1 of IS 808(R2)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 4.1 of IS 808(Cy)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 4.1 of IS 808(Ix)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 4.1 of IS 808(Iy)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 4.1 of IS 808(rx)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 4.1 of IS 808(ry)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 4.1 of IS 808(Zx)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 4.1 of IS 808(Zy)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 5.1 of IS 808(Mass. IS 808)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 5.1 of IS 808(Sectional Area. IS 808)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 5.1 of IS 808(A*B)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 5.1 of IS 808(R1)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 5.1 of IS 808(R2)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 5.1 of IS 808(Cx)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 5.1 of IS 808(Cy)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 5.1 of IS 808(Ix)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 5.1 of IS 808(Iy)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 5.1 of IS 808(Ia( Max ))	-	9500	For complete testing
Cl 12 of IS 15911 and Table 5.1 of IS 808(Iv( Max ))	-	9500	For complete testing
Cl 12 of IS 15911 and Table 5.1 of IS 808(rx)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 5.1 of IS 808(ry)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 5.1 of IS 808(ru( Max ))	-	9500	For complete testing
Cl 12 of IS 15911 and Table 5.1 of IS 808(rv( Min ))	-	9500	For complete testing
Cl 12 of IS 15911 and Table 5.1 of IS 808(Zx)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 5.1 of IS 808(Zy )	-	9500	For complete testing
Cl 12 of IS 15911 and Table 6.1 of IS 808(Mass. IS 808)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 6.1 of IS 808(Sectional Area. IS 808)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 6.1 of IS 808(A*B)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 6.1 of IS 808(R1)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 6.1 of IS 808(R2)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 6.1 of IS 808(Cx)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 6.1 of IS 808(Cy)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 6.1 of IS 808(Tanα)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 6.1 of IS 808(Ix)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 6.1 of IS 808(Iy)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 6.1 of IS 808(Ia( Max ))	-	9500	For complete testing
Cl 12 of IS 15911 and Table 6.1 of IS 808(Iv( Max ))	-	9500	For complete testing
Cl 12 of IS 15911 and Table 6.1 of IS 808(rx)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 6.1 of IS 808(ry)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 6.1 of IS 808(ru( Max ))	-	9500	For complete testing
Cl 12 of IS 15911 and Table 6.1 of IS 808(rv( Min ))	-	9500	For complete testing
Cl 12 of IS 15911 and Table 6.1 of IS 808(Zx)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 6.1 of IS 808(Zy )	-	9500	For complete testing
Cl 12 of IS 15911 and Table 6.2 of IS 808(Mass. IS 808)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 6.2 of IS 808(Sectional Area. IS 808)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 6.2 of IS 808(A*B)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 6.2 of IS 808(R1)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 6.2 of IS 808(R2)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 6.2 of IS 808(Cx)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 6.2 of IS 808(Cy)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 6.2 of IS 808(Tanα)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 6.2 of IS 808(Ix)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 6.2 of IS 808(Iy)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 6.2 of IS 808(Ia( Max ))	-	9500	For complete testing
Cl 12 of IS 15911 and Table 6.2 of IS 808(Iv( Max ))	-	9500	For complete testing
Cl 12 of IS 15911 and Table 6.2 of IS 808(rx)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 6.2 of IS 808(ry)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 6.2 of IS 808(ru( Max ))	-	9500	For complete testing
Cl 12 of IS 15911 and Table 6.2 of IS 808(rv( Min ))	-	9500	For complete testing
Cl 12 of IS 15911 and Table 6.2 of IS 808(Zx)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 6.2 of IS 808(Zy )	-	9500	For complete testing
Cl 12 of IS 15911 and Table 1 of IS 1173(Clauses 3.1 , 5.1 and Table 1 of IS 1173)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 1 of IS 1252(Clauses 4.1 , 6.1 and Table 1 of IS 1252)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 2 of IS 1730(Clauses 4.1 , 4.2 and Table 1 of IS 1730)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 2 of IS 1730(Clauses 4.2 and Table 1 of IS 1730)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 3 of IS 1730(Clauses 4.3 and Table 1 of IS 1730)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 4 of IS 1730(Clauses 5.1 and Table 1 of IS 1730)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 5 of IS 1730(Clauses 5.2 and Table 1 of IS 1730)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 6 of IS 1730(Clauses 6.1 and Table 1 of IS 1730)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 7 of IS 1730(Clauses 6.2 and Table 1 of IS 1730)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 8 of IS 1730(Clauses 7.1, 7.2 and Table 1 of IS 1730)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 9 of IS 1730(Clauses 7.2 and Table 1 of IS 1730)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 1 of IS 1732(Clauses 3.1, 4.1,4.1.1 and Table 1 of IS 1732)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 2 of IS 1732(Clauses 3.1, 4.1,4.1.1 and Table 1 of IS 1732)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 1 of IS 1863(Clauses 4.1, 5.5 and Table 1 of IS 1863)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 2 of IS 1863(Clauses 5.1 and Table 2 of IS 1863)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 3 of IS 1863(Clauses 5.2 and Table 2 of IS 1863)	-	9500	For complete testing
Cl 12 of IS 15911 and Table 1 of IS 3954(Clauses 4, 6.1 and Table 2 of IS 3954)	-	9500	For complete testing
13(Tolerances)	-	9500	For complete testing
17(Marking)	-	9500	For complete testing
Table-1, 5.1, 8.1 & 8.2(Carbon: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	-	-
Table-1, 5.1, 8.1 & 8.2(Sulphur: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	-	-
Table-1, 5.1, 8.1 & 8.2(Phosphorous: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	-	-
Table-1, 5.1, 8.1 & 8.2(Manganese: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	-	-
Table-1, 5.1, 8.1 & 8.2(Silicon: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	-	-
Table-1, 5.1, 8.1 & 8.2(Chromium: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	-	-
Table-1, 5.1, 8.1 & 8.2(Molybdenum: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	-	-
Table-1, 5.1, 8.1 & 8.2(Vanadium: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	-	-
Table-1, 5.1, 8.1 & 8.2(Nickel: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	-	-
Table-1, 5.1, 8.1 & 8.2(Copper: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	-	-
Table-1, 5.1, 8.1 & 8.2(Aluminium: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	-	-
Table-1, 5.1, 8.1 & 8.2(Nitrogen: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	-	-
Table-1, 5.1, 8.1 & 8.2(Niobium: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	-	-
Table-1, 5.1, 8.1 & 8.2(Titanium: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	-	-
Table-1, 5.1, 8.1 & 8.2(Boron: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	-	-
7(Freedom from defects)	-	-	-
5 and 10.3.1(Tensile strength. IS 1608)	-	-	-
5 and 10.3.1(Yield Stress. IS 1608)	-	-	-
5 and 10.3.1(Percentage Elongation. . IS 1608)	-	-	-
5 and 10.3.1(Internal Bend Diameter)	-	-	-
11.3( Bend Test. IS 1599)	-	-	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(Mass. IS 808)	-	-	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(Sectional Area. IS 808)	-	-	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(D)	-	-	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(B)	-	-	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(t)	-	-	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(T)	-	-	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(Flange Slop, Max α , )	-	-	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(R1)	-	-	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(R2)	-	-	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(Ix)	-	-	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(Iy)	-	-	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(rx)	-	-	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(ry)	-	-	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(Zx)	-	-	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(Zy)	-	-	-
Cl 12 of IS 15911 and Table 2.2 of IS 808(Mass. IS 808)	-	-	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(Sectional Area. IS 808)	-	-	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(D)	-	-	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(B)	-	-	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(t)	-	-	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(T)	-	-	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(Flange Slop, Max α , )	-	-	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(R1)	-	-	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(R2)	-	-	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(Ix)	-	-	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(Iy)	-	-	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(rx)	-	-	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(ry)	-	-	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(Zx)	-	-	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(Zy)	-	-	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(Mass. IS 808)	-	-	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(Sectional Area. IS 808)	-	-	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(D)	-	-	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(B)	-	-	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(t)	-	-	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(T)	-	-	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(Flange Slop, Max α , )	-	-	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(R1)	-	-	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(R2)	-	-	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(Ix)	-	-	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(Iy)	-	-	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(rx)	-	-	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(ry)	-	-	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(Zx)	-	-	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(Zy)	-	-	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(Mass. IS 808)	-	-	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(Sectional Area. IS 808)	-	-	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(D)	-	-	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(B)	-	-	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(t)	-	-	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(T)	-	-	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(Flange Slop, Max α , )	-	-	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(R1)	-	-	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(R2)	-	-	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(Cy)	-	-	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(Ix)	-	-	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(Iy)	-	-	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(rx)	-	-	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(ry)	-	-	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(Zx)	-	-	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(Zy)	-	-	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(Mass. IS 808)	-	-	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(Sectional Area. IS 808)	-	-	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(A*B)	-	-	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(R1)	-	-	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(R2)	-	-	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(Cx)	-	-	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(Cy)	-	-	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(Ix)	-	-	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(Iy)	-	-	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(Ia( Max ))	-	-	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(Iv( Max ))	-	-	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(rx)	-	-	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(ry)	-	-	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(ru( Max ))	-	-	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(rv( Min ))	-	-	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(Zx)	-	-	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(Zy )	-	-	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(Mass. IS 808)	-	-	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(Sectional Area. IS 808)	-	-	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(A*B)	-	-	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(R1)	-	-	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(R2)	-	-	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(Cx)	-	-	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(Cy)	-	-	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(Tanα)	-	-	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(Ix)	-	-	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(Iy)	-	-	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(Ia( Max ))	-	-	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(Iv( Max ))	-	-	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(rx)	-	-	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(ry)	-	-	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(ru( Max ))	-	-	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(rv( Min ))	-	-	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(Zx)	-	-	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(Zy )	-	-	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(Mass. IS 808)	-	-	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(Sectional Area. IS 808)	-	-	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(A*B)	-	-	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(R1)	-	-	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(R2)	-	-	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(Cx)	-	-	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(Cy)	-	-	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(Tanα)	-	-	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(Ix)	-	-	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(Iy)	-	-	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(Ia( Max ))	-	-	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(Iv( Max ))	-	-	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(rx)	-	-	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(ry)	-	-	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(ru( Max ))	-	-	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(rv( Min ))	-	-	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(Zx)	-	-	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(Zy )	-	-	-
Cl 12 of IS 15911 and Table 1 of IS 1173(Clauses 3.1 , 5.1 and Table 1 of IS 1173)	-	-	-
Cl 12 of IS 15911 and Table 1 of IS 1252(Clauses 4.1 , 6.1 and Table 1 of IS 1252)	-	-	-
Cl 12 of IS 15911 and Table 2 of IS 1730(Clauses 4.1 , 4.2 and Table 1 of IS 1730)	-	-	-
Cl 12 of IS 15911 and Table 2 of IS 1730(Clauses 4.2 and Table 1 of IS 1730)	-	-	-
Cl 12 of IS 15911 and Table 3 of IS 1730(Clauses 4.3 and Table 1 of IS 1730)	-	-	-
Cl 12 of IS 15911 and Table 4 of IS 1730(Clauses 5.1 and Table 1 of IS 1730)	-	-	-
Cl 12 of IS 15911 and Table 5 of IS 1730(Clauses 5.2 and Table 1 of IS 1730)	-	-	-
Cl 12 of IS 15911 and Table 6 of IS 1730(Clauses 6.1 and Table 1 of IS 1730)	-	-	-
Cl 12 of IS 15911 and Table 7 of IS 1730(Clauses 6.2 and Table 1 of IS 1730)	-	-	-
Cl 12 of IS 15911 and Table 8 of IS 1730(Clauses 7.1, 7.2 and Table 1 of IS 1730)	-	-	-
Cl 12 of IS 15911 and Table 9 of IS 1730(Clauses 7.2 and Table 1 of IS 1730)	-	-	-
Cl 12 of IS 15911 and Table 1 of IS 1732(Clauses 3.1, 4.1,4.1.1 and Table 1 of IS 1732)	-	-	-
Cl 12 of IS 15911 and Table 2 of IS 1732(Clauses 3.1, 4.1,4.1.1 and Table 1 of IS 1732)	-	-	-
Cl 12 of IS 15911 and Table 1 of IS 1863(Clauses 4.1, 5.5 and Table 1 of IS 1863)	-	-	-
Cl 12 of IS 15911 and Table 2 of IS 1863(Clauses 5.1 and Table 2 of IS 1863)	-	-	-
Cl 12 of IS 15911 and Table 3 of IS 1863(Clauses 5.2 and Table 2 of IS 1863)	-	-	-
Cl 12 of IS 15911 and Table 1 of IS 3954(Clauses 4, 6.1 and Table 2 of IS 3954)	-	-	-
13(Tolerances)	-	-	-
17(Marking)	-	-	-

04 Dec, 2028

-
Included w.e.f.21.05.2025

3415

Vardhamana Testing Laboratory OPC Pvt. Ltd.

8178226

IS 302 : Part 2 : Sec 30 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 30 room heaters (First Revision)

Electric Room heater

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 (Classification)	-	0	-
Cl.6 (Classification)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7(Marking and Instructions)	-	0	-
Cl.7(Marking and Instructions)	-	0	-
Cl.7(Marking and Instructions)	-	0	-
Cl.7.3(Marking and Instructions)	-	0	-
Cl.7.3(Marking and Instructions)	-	0	-
Cl.7.3(Marking and Instructions)	-	0	-
Cl.7.4(Marking and Instructions)	-	0	-
Cl.7.5(Marking and Instructions)	-	0	-
Cl.7.6 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.8 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.9 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.10 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.11 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2009(Marking and Instructions)	-	0	-
Cl.7.13 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.14 of IS302-1:2008(Marking and Instructions)	-	0	-
Cl.7.14(Marking and Instructions)	-	0	-
Cl.7.14(Marking and Instructions)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.101(Marking and Instructions)	-	0	-
Cl.8 & IS:302-1:2008(Protection Against Access to Live Parts)	-	1000	-
Cl.10 & IS:302-1:2008(Power Input and Current)	-	2000	-
Cl.11 & IS:302-1:2008(Heating)	-	1500	-
Cl.11 & IS:302-1:2008(Heating)	-	1500	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11.8(Heating)	-	0	-
Cl.11.8(Heating)	-	0	-
Cl.11.8(Heating)	-	0	-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	1000	-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	0	-
Cl.14 & IS:302-1:2008(Transient Over Voltages)	-	1000	-
Cl.15 & IS: 302-1:2008(Moisture Resistance )	-	1500	-
Cl.15.3 of IS 302-1:200(Moisture Resistance )	-	0	-
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	1000	-
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	0	-
Cl.17 & IS:302-1:2008(Over load Protection of Transformers and Associated Circuits )	-	1000	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	1000	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	0	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	0	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	0	-
Cl.19.101(Abnormal Operation.)	-	0	-
Cl.19.102(Abnormal Operation.)	-	0	-
Cl.19.103(Abnormal Operation.)	-	0	-
Cl.19.104(Abnormal Operation.)	-	0	-
Cl.19.105(Abnormal Operation.)	-	0	-
Cl.19.106(Abnormal Operation.)	-	0	-
Table 8 of IS 302-1:2008(Abnormal Operation.)	-	0	-
Cl.19.107(Abnormal Operation.)	-	0	-
Cl.19.108(Abnormal Operation.)	-	0	-
Cl.19.109(Abnormal Operation.)	-	0	-
Cl.19.110(Abnormal Operation.)	-	0	-
Cl.19.111(Abnormal Operation.)	-	0	-
Cl.19.112(Abnormal Operation.)	-	0	-
Cl.19.113(Abnormal Operation.)	-	0	-
Cl.19.114(Abnormal Operation.)	-	0	-
Cl.20 & IS:302-1:2008(Stability & Mechanical Hazards)	-	1000	-
Cl.21 & IS:302-1:2008)(Mechanical Strength.)	-	1000	-
Cl.21.2 of IS 302-1:2008(Mechanical Strength.)	-	0	-
Cl.21.101 (Mechanical Strength.)	-	0	-
Cl.21.102(Mechanical Strength.)	-	0	-
Cl.21.103(Mechanical Strength.)	-	0	-
Cl.22.1 of IS 302-1:2008(Construction)	-	1000	-
Cl.22.5 of IS 302-1:2008(Construction)	-	0	-
Cl.22.6 of IS 302-1:2008(Construction)	-	0	-
Cl.22.7 of IS 302-1:2008(Construction)	-	0	-
Cl.22.8 of IS 302-1:2008(Construction)	-	0	-
Cl.22.9 of IS 302-1:2008(Construction)	-	0	-
Cl.22.11(Construction)	-	0	-
Cl.22.12 of IS 302-1:2008(Construction)	-	0	-
Cl.22.13 of IS 302-1:2008(Construction)	-	0	-
Cl.22.14 of IS 302-1:2008(Construction)	-	0	-
Cl.22.15 of IS 302-1:2008(Construction)	-	0	-
Cl.22.18 of IS 302-1:2008(Construction)	-	0	-
Cl.22.20 of IS 302-1:2008(Construction)	-	0	-
Cl.22.21 of IS 302-1:2008(Construction)	-	0	-
Cl.23 & IS:302-1:2008(Internal Wiring )	-	0	-
Cl.23.4 & Cl.29 of 302-1:2008(Internal Wiring )	-	1000	-
Cl.23.5 of 302-1:2008(Internal Wiring )	-	0	-
Cl.23.7 of 302-1:2008(Internal Wiring )	-	0	-
C.23.7 of 302-1:2008(Internal Wiring )	-	0	-
Cl.24.1 of 302-1:2008(Component)	-	500	-
Cl.24.1 of 302-1:2008(Component)	-	0	-
Cl.24.1.3 (Component)	-	0	-
Cl.24.1.3 (Component)	-	0	-
Cl.24.1.3 (Component)	-	0	-
Cl.24.1.3 (Component)	-	0	-
C.24.1.4(Component)	-	0	-
C.24.2 of 302-1:2008(Component)	-	0	-
Cl.24.10(Component)	-	0	-
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.2 of IS 3021:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.3 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	1000	-
Cl. 25.4 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.6 of 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.7.(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.8(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.9(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.11(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.12(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.13(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.14 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.17 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.18(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.20(Supply Connection and External Flexible Cords )	-	0	-
Cl.26.1 of IS 302-1:2008(Terminal for External Conductors )	-	0	-
Cl.26.10 of IS 302-1:2008(Terminal for External Conductors )	-	1000	-
Cl.26.11 of IS 302-1:2008(Terminal for External Conductors )	-	0	-
Cl.27.1 of 302-1:2008(Provision for Earthing.)	-	0	-
Cl.27.5 of 302-1:2008(Provision for Earthing.)	-	0	-
Cl.28 of 302-1:2008(Screws and Connections.)	-	1000	-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	1000	-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	0	-
Cl.30 & IS:302-1:2008(Resistance to Heat and Fire)	-	1000	-
Cl.30.2.2 of 302-1:2008(Resistance to Heat and Fire)	-	0	-
Cl.31 & IS:302-1:2008(Resistance to Rusting.)	-	1000	-
Cl.31 of IS:302-1:2008(Resistance to Rusting.)	-	0	-
Cl.30.2 of 302-1:2008(Resistance to Heat and Fire : Resistance to fire)	-	0	-
Cl.30.1 of IS:302-1:2008(Resistance to Heat and Fire: Resistance to heat. )	-	0	-
Cl.29.2 of IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage Distance)	-	0	-
Cl.29.1 of IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance )	-	0	-
Cl.28 of 302-1:2008(Screws and Connections.)	-	0	-
Cl.27.5 of 302-1:2008(Provision for Earthing : ECR)	-	1000	-
Cl.27.1 of 302-1:2008(Provision for Earthing )	-	0	-
Cl.26 of IS 302-1:2008(Terminal for External Conductors )	-	0	-
Cl.25.18 of 302-1:2008(Supply Connection and External Flexible Cords : Arrangement of cord anchorages )	-	0	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords : Cord grip test - displacement)	-	0	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords : Cord grip test - strain at terminals )	-	0	-
Cl. 25.13 of 302-1:2008(Supply Connection and External Flexible Cords : Inlet opening of supply cords )	-	0	-
Cl. 25.12 of 302-1:2008(Supply Connection and External Flexible Cords : Moulding of cords )	-	0	-
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords : Colour of earthing wire )	-	0	-
Cl. 25.9 of 302-1:2008(Supply Connection and External Flexible Cords : Contact with sharp edge )	-	0	-
Cl.25.8 of 302-1:2008(Supply Connection and External Flexible Cords : Resistance of supply wires )	-	0	-
Cl.25.7 of IS:302-2-30:2007(Supply Connection and External Flexible Cords : Supply cords material )	-	0	-
Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords : Type of attachments )	-	0	-
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords : Means of connection )	-	0	-
Cl.24 of IS:302-2-30:2007(Component)	-	0	-
Cl.23.7 of 302-1:2008(Internal Wiring : Colour of earting conductor )	-	0	-
Cl.23 of IS:302-1:2008(Internal Wiring )	-	0	-
Cl.22.106 of IS:302-2-30:2007(Construction : Checking of thermostats, timers or similar means for visibl glowing radiant heaters)	-	0	-
Cl.22.106 of IS:302-2-30:2007(Construction : Checking of openings on the underside)	-	0	-
Cl.22.102 & Cl 22.103 of IS:302-2-30:2007(Construction : Fireguard )	-	0	-
Cl.22.101 of IS:302-2-30:2007(Construction : Prevention to contact with heating element)	-	0	-
Cl.22.24 of IS:302-2-30:2007(Construction : test of bare heating element)	-	0	-
Cl.22.18 of IS 302-1:2008(Construction : Resistance to corrosion )	-	0	-
Cl.22.15 of IS 302-1:2008(Construction : Storage hooks for flexible cords)	-	0	-
Cl.22.14 of IS 302-1:2008(Construction : ragged and sharp edges)	-	0	-
Cl.22.13 of IS 302-1:2008(Construction : Position of handles )	-	0	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knobs,grips,lever and similer parts )	-	0	-
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable parts )	-	0	-
Cl.22.7 of IS:302-2-30:2007(Construction : Pressure test of oil heater )	-	0	-
Cl.21.101 of IS:302-2-30:2007(Mechanical Strength : fire gaurd deformation test )	-	0	-
Cl.21.2 of IS 302-1:2008(Mechanical Strength : Pentration by sharp implementation )	-	0	-
Cl.21.1 of IS:302-1:2008)(Mechanical Strength : Rough handling )	-	0	-
Cl.20 of IS:302-2-30:2007(Stability of Mechanical Hazards)	-	0	-
Cl.19.114 of IS:302-2-30:2007(Abnormal Operation : the temp. of the surface of the container for oil heaters )	-	0	-
Cl.19.112 of IS:302-2-30:2007(Abnormal Operation : Ignition of bleached cotton gauge)	-	0	-
Cl.19.111 of IS:302-2-30:2007(Abnormal Operation : Ignition of flannelette for Visibly glowing heaters)	-	0	-
Cl.19.110 of IS:302-2-30:2007(Abnormal Operation : operation against wall for visibly glowing radiant heaters )	-	0	-
Cl.19.109 of IS:302-2-30:2007(Abnormal Operation : operation against wall for fan heater )	-	0	-
Cl.19.106 of IS:302-2-30:2007(Abnormal Operation : Locked rotor of fan hetear )	-	0	-
Cl.19.103 , Cl 19.104 of IS:302-2-30:2007(Abnormal Operation : Operation after Covering by cotton)	-	0	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : High Voltage )	-	0	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : temp rise of supply cord )	-	0	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : Temp rise of test corner )	-	0	-
Cl.19 of IS:302-1:2008(Abnormal Operation : Emission of molten or poisonous or ignitable gas)	-	0	-
Cl.16 of IS:302-1:2008(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	0	-
Cl.16 of IS:302-1:2008(Leakage current and Electric strength (After humidity): Leakage current )	-	0	-
Cl.15 of IS 302-1:2008(Moisture Resistance )	-	0	-
Cl.14 of IS:302-1:2008(Transient Over Voltages)	-	0	-
Cl.13 of IS:302-1:2008(Leakage Current of Electric Strength at operating temp. )	-	0	-
Cl.13 of IS:302-1:2008(Leakage Current of Electric Strength at operating temp. )	-	0	-
Cl.11 of IS:302-2:30: 2007(Heating : Room temperature)	-	0	-
Cl.11.8 of IS:302-2:30: 2007(Heating : For liquid filled radiators the temp. rise of the outer surface of the liquid container)	-	0	-
Cl.11 of IS:302-2:30: 2007(Heating : Temperature rise in winding)	-	0	-
Cl.11 of IS:302-2:30: 2007(Heating : Air-outlet grills)	-	0	-
Cl.11 of IS:302-2:30: 2007(Heating : Surfaces of handles, knobs, grips and similar parts)	-	0	-
Cl.11 of IS:302-2:30: 2007(Heating : Wooden supports, walls, ceiling and floor of the test corner)	-	0	-
Cl.11 of IS:302-2:30: 2007(Heating : PVC Insulation )	-	0	-
Cl.10 of IS:302-1:2008(Power Input and Current)	-	0	-
Cl.8 of IS:302-1:2008(Protection Against Access to Live Parts)	-	0	-
Cl.7.101 of IS:302-2:30: 2007(Marking and Instructions : standard mark. )	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions : Visibility of marking concerning covering)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions : discernibility from the out side )	-	0	-
Cl.7.14 of IS:302-2:30: 2007(Marking and Instructions : Height of “Do not cover”)	-	0	-
Cl.7.14 of IS:302-2:30: 2007(Marking and Instructions : height of symbol)	-	0	-
Cl.7.14 of IS302-1:2008(Marking and Instructions : Legibility and durability )	-	0	-
Cl.7.13 of IS 302-1:2008(Marking and Instructions : Languge of instruction and texts )	-	0	-
Cl.7.11 of IS :302-1:2008(Marking and Instructions : Controls )	-	0	-
Cl.7.9 of IS :302-1:2008(Marking and Instructions : switches )	-	0	-
Cl.7.8 of IS :302-1:2008(Marking and Instructions : terminals )	-	0	-
Cl.7.6 of IS:302-1:2008(Marking and Instructions : Symbols )	-	0	-
Cl.7.5 of IS:302-1:2008(Marking and Instructions : upper of lower limit of the rated power input )	-	0	-
Cl 7.1 & Cl.7.6 of IS:302-2:30: 2007(Marking and Instructions : Do not cover )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Country of manufacture )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Symbol for Class-II )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Model or type )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Name , trade-mark or identification mark of the manufacturer )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : rated power input )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Nature of supply )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Rated Voltage )	-	0	-
Cl.25.20 of 302-1:2008(Supply Connection and External Flexible Cords : Additional insulation )	-	0	-

29 Apr, 2027

-
-

3416

Standard Testing Laboratory Private Limited

8170106

IS 6528 (2024)

Stainless steel wire - Specification ( Second Revision )

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 6(FREEDOM FROM DEFECTS)	-	10000	-
As per clause 7(CARBON)	-	10000	-
As per clause 7(SILICON)	-	10000	-
As per clause 7(MANGANESE)	-	10000	-
As per clause 7(PHOSPHORUS)	-	10000	-
As per clause 7(SULPHUR)	-	10000	-
As per clause 7(CHROMIUM)	-	10000	-
As per clause 7(MOLYBEDNUM)	-	10000	-
As per clause 7(NICKEL)	-	10000	-
As per clause 7(NITROGEN)	-	10000	-
As per clause 7(COPPER)	-	10000	-
As per clause 7(NIOBIUM)	-	10000	-
As per clause 7(TITANIUM)	-	10000	-
As per clause 7(ALUMINIUM)	-	10000	-
As per clause 8(HEAT TREATMENT)	-	10000	-
As per clause 9(Dimension Tolerance)	-	10000	-
As per clause 10(TENSILE TEST)	-	10000	-
As per clause 10.2(REVERSE BEND TEST)	-	10000	-
As per clause 10.3(TORSION TEST)	-	10000	-
As per clause 14(FINISH)	-	10000	-
As per clause 15(CORROSION RESISTANCE)	-	10000	-
As per clause 16.2(MARKING)	-	10000	-

10 Apr, 2028

-
Included w.e.f 05.05.2025

3417

Sleen India Biz venture Private Limited, Agra

9139736

IS 11652 (2017)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg cement – Specification (third revision)

HDPE/PP

30500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	500	-
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	250	-
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	250	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	250	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	250	-
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	250	-
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	250	-
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	250	-
4.1(Raw Material )	-	2000	-
4.2 (Fabric)	-	0	-
4.2 (Linear Density, 900 denier)	-	1000	-
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	250	-
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	500	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	0	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
4.3(Sacks)	-	1000	-
4.4(Seam )	-	1000	-
4.4(Seam )	-	0	-
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	0	-
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0	-
4.4(Seam The stitching shall be done with double fold over seam to)	-	0	-
4.4(to a depth of minimum 25 mm, so that so that)	-	250	-
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	250	-
4.4(The number of stitches/dm shall be 14 ± 2.)	-	0	-
4.4(Seam)	-	0	-
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.5(Lamination )	-	1000	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	250	-
4.7(Valve for Filling of Sacks)	-	250	-
4.7(There shall be a double fold at the top seam and)	-	0	-
4.7(and then stitching shall be done through six layers.)	-	0	-
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	0	-
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	500	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	0	-
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	0	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	3000	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	0	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	1500	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	0	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	0	-
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	1500	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	1500	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	0	-
5/5.6 (UV Resistance, )	-	0	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	11600	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	0	-
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	0	-
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	0	-
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	0	-
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	0	-
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	0	-
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	0	-
4.1(Raw Material )	-	0	-
4.2 (Fabric)	-	0	-
4.2 (Linear Density, 900 denier)	-	0	-
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	0	-
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	0	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	0	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
4.3(Sacks)	-	0	-
4.4(Seam )	-	0	-
4.4(Seam )	-	0	-
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	0	-
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0	-
4.4(Seam The stitching shall be done with double fold over seam to)	-	0	-
4.4(to a depth of minimum 25 mm, so that so that)	-	0	-
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0	-
4.4(The number of stitches/dm shall be 14 ± 2.)	-	0	-
4.4(Seam)	-	0	-
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	0	-
4.7(Valve for Filling of Sacks)	-	400	-
4.7(There shall be a double fold at the top seam and)	-	0	-
4.7(and then stitching shall be done through six layers.)	-	0	-
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	0	-
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	0	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	0	-
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	0	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	0	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	0	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	0	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	0	-
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	0	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	0	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	0	-
5/5.6 (UV Resistance, )	-	0	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	0	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	0	-
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	0	-
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	0	-
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	0	-
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	0	-
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	0	-
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	0	-
4.1(Raw Material )	-	0	-
4.2 (Fabric)	-	0	-
4.2 (Linear Density, 900 denier)	-	0	-
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	0	-
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	0	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	0	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
4.3(Sacks)	-	0	-
4.4(Seam )	-	0	-
4.4(Seam )	-	0	-
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	0	-
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0	-
4.4(Seam The stitching shall be done with double fold over seam to)	-	0	-
4.4(to a depth of minimum 25 mm, so that so that)	-	0	-
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0	-
4.4(The number of stitches/dm shall be 14 ± 2.)	-	0	-
4.4(Seam)	-	0	-
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	0	-
4.7(Valve for Filling of Sacks)	-	0	-
4.7(There shall be a double fold at the top seam and)	-	0	-
4.7(and then stitching shall be done through six layers.)	-	0	-
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	0	-
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	0	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	0	-
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	0	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	0	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	0	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	0	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	0	-
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	0	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	0	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	0	-
5/5.6 (UV Resistance, )	-	0	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	0	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	0	-
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	0	-
Cl-5 Fig. 1- Table 1- Sr. no. ii(Ends per dm - Annex B 40 ± 2)	-	0	-
Cl-5 Fig. 1- Table 1-Sr. no. iii(Picks per dm-Annex B 40 ± 2)	-	0	-
Cl-5, Fig. 1- Table 1- Sr. no. i(Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm)	-	0	-
Cl-5, Fig. 1- Table 1- Sr. no. i(Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm)	-	0	-
Cl-5, Fig. 1- Table 1-Sr. no. i(Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm)	-	0	-
Cl-5, Fig. 1, Table 1(i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm)	-	0	-
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	0	-
4.1(Raw Material )	-	0	-
4.2 (Fabric)	-	0	-
4.2 (Linear Density, 900 denier)	-	0	-
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	0	-
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	0	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	0	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
4.3(Sacks)	-	0	-
4.4(Seam )	-	0	-
4.4(Seam )	-	0	-
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	0	-
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0	-
4.4(Seam The stitching shall be done with double fold over seam to)	-	0	-
4.4(to a depth of minimum 25 mm, so that so that)	-	0	-
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0	-
4.4(The number of stitches/dm shall be 14 ± 2.)	-	0	-
4.4(Seam)	-	0	-
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	0	-
4.7(Valve for Filling of Sacks)	-	0	-
4.7(There shall be a double fold at the top seam and)	-	0	-
4.7(and then stitching shall be done through six layers.)	-	0	-
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	0	-
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	0	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	0	-
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	0	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	0	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	0	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	0	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	0	-
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	0	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	0	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	0	-
5/5.6 (UV Resistance, )	-	0	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	0	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	0	-
4.4(Seam)	-	0	`

15 May, 2027

-
Included w.e.f.19.05.2025

3418

EKO PRO ENGINEERS PRIVATE LIMITED (32/41), GHAZIABAD

9179706

IS 14756 (2024)

Stainless Steel Utensils - Specification (THIRD REVISION)

23000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 3.1(Material used for manufacturing utensils)	-	7000	-
Cl 3.2(Material used for composite bottom)	-	7000	-
Cl 3.3(Material used for body of utensil of 3-ply construction)	-	7000	-
Cl 3.4(Material used for stainless steel lid)	-	7000	-
Cl 3.5(Material used for tempered glass lid)	-	7000	-
Cl 3.5(Material used for stainless steel rim)	-	7000	-
Cl 4.2 & Table 1(Minimum Sheet Thickness for Body of Utensil)	-	500	-
Cl 4.2 & Table 2(Minimum Sheet Thickness for Lid of Utensil)	-	500	-
Cl 4.2(Thickness of the finished utensil)	-	500	-
Cl 4.3(Classification)	-	0	-
Cl 4.4 (i)(Thickness of Aluminium disc/core)	-	500	-
Cl 4.4 (ii)(Thickness of Protector/cowl)	-	500	-
Cl 4.5(Minimum sheet thickness (3-ply utensil))	-	500	-
Cl 4.5(Thickness of finished utensil (3-ply utensil))	-	500	-
Cl 5.1(Manufacturing defect & visual appearance)	-	500	-
CL 5.2(Accessibility for cleaning)	-	250	-
Cl 5.3(Joining of handles to the utensils)	-	250	-
Cl 5.4(Requirement for handles)	-	14500	-
Cl 5.5(Welding (Finish))	-	250	-
Cl 5.6(Finish of 3-ply utensil)	-	250	-
Cl 5.7(Requirement for coating)	-	1500	-
Cl 5.8(Coating thickness test)	-	1500	-
Cl 5.8(Coating adhesion test)	-	1500	-
Cl 5.8.1(Thermal shock test (Coating))	-	1500	-
Cl 6.1(Staining Test (Type Test - Frequency Once in a Year))	-	1500	-
Cl 6.2(Mechanical Shock Test (for Cladded Utensils Only))	-	1000	-
Cl 6.3(Thermal Shock Test (for Cladded Utensils Only))	-	1500	-
Cl 6.4(Dry Heat Test (for Cladded Utensils Only))	-	1500	-
Cl 6.5(Coating Thickness Test (for Copper Deposit))	-	2500	-
Cl 6.6(Thermal shock test (3-ply construction utensil body))	-	1500	-
Cl 6.7(Nominal Capacity Test)	-	200	-
Cl 8(Marking)	-	250	-
3.1(a) Carbon)	-	7000	Already Mentioned
3.1(b) Silicon)	-	7000	Already Mentioned
3.1(c)Manganese)	-	7000	Already Mentioned
3.1(d) Nickel)	-	7000	Already Mentioned
3.1(Chromium)	-	7000	Already Mentioned
3.1(Sulphu)	-	7000	Already Mentioned
3.1(Phosphorus)	-	7000	Already Mentioned
Stainless Steel Utensils - Specification (THIRD REVISION)(Copper)	-	7000	Already Mentioned
3.1(Nitrogen)	-	7000	Already Mentioned
3.2 a(a) Carbon)	-	7000	Already Mentioned
3.2 a(b) Silicon)	-	7000	Already Mentioned
68995(Manganese)	-	7000	Already Mentioned
3.2 a(d) Nickel)	-	7000	Already Mentioned
3.2 a(Chromium)	-	7000	Already Mentioned
3.2 a(Sulphur)	-	7000	Already Mentioned
3.2 a(g) Phosphorus)	-	7000	Already Mentioned
3.2 a(h) Copper)	-	7000	Already Mentioned
3.2 a(Nitrogen)	-	7000	Already Mentioned
3.2 b(a) Aluminium)	-	7000	Already Mentioned
3.2 b(b) Copper)	-	7000	Already Mentioned
3.2 b(c) Magnesium)	-	7000	Already Mentioned
3.2 b(d) Silicon)	-	7000	Already Mentioned
3.2 b(e) Iron)	-	7000	Already Mentioned
3.2 b(f) Manganese)	-	7000	Already Mentioned
3.2 b(d) Silicon)	-	7000	Already Mentioned
3.2 b(e) Iron)	-	7000	Already Mentioned
3.2 b(f) Manganese)	-	7000	Already Mentioned
3.2 b(g) Zinc)	-	7000	Already Mentioned
3.2 b(h) Titanium)	-	7000	Already Mentioned
3.2 b(i) Chromium)	-	7000	Already Mentioned
3.2 b(j) Cu+Si+Fe+Mn+Zn+mg)	-	7000	Already Mentioned
3.2 b(k) Lead)	-	7000	Already Mentioned
3.2 c(a) Carbon)	-	7000	Already Mentioned
3.2 c(b) Silicon)	-	7000	Already Mentioned
3.2 c(c) Manganese)	-	7000	Already Mentioned
3.2 c(d) Nickel)	-	7000	Already Mentioned
3.2 c(e) Chromium)	-	7000	Already Mentioned
3.2 c(f) Sulphur)	-	7000	Already Mentioned
3.2 c(g) Phosphorus)	-	7000	Already Mentioned
3.3(a) Inner layer)	-	7000	Already Mentioned
3.3(b) Middlelayer)	-	7000	Already Mentioned
3.3(c) Outerlayer)	-	7000	Already Mentioned
3.4(a) Carbon)	-	7000	Already Mentioned
3.4(b) Silicon)	-	7000	Already Mentioned
3.4(c) Manganese)	-	7000	Already Mentioned
3.4(d) Nickel)	-	7000	Already Mentioned
3.4(e) Chromium)	-	7000	Already Mentioned
3.4(f) Sulphur)	-	7000	Already Mentioned
3.4(g) Phosphorus)	-	7000	Already Mentioned
3.4(h) Copper)	-	7000	Already Mentioned
3.4(i) Nitrogen)	-	7000	Already Mentioned
3.4(Thickness stainless steel lid)	-	7000	Already Mentioned
3.5(If the utensils provided with tempered glass lid)	-	7000	Already Mentioned
4.1(Shapes and Dimensions)	-	200	-
4.2(Thickness of the sheet)	-	0	Already Mentioned
4.3(Classifications)	-	0	Already Mentioned
4.3(Core Thickness for 3-ply Construction (asper IS15960))	-	200	-
4.3(Thickness of protective layer (as per IS 15960))	-	0	Already Mentioned
4.4(Thickness of 3ply full body utensil)	-	0	Already Mentioned
5(Workmanship and finish)	-	0	Already Mentioned
5.4(Handles)	-	0	Already Mentioned
4.1 of IS 13395(Construction)	-	0	Already Mentioned
4.2 of IS 13395(Materials)	-	0	Already Mentioned
4.3 of IS 13395(Selection and Size)	-	0	Already Mentioned
4.4 of Is 13395(Position of Handle and Knob with Respect to Cookware)	-	0	Already Mentioned
4.5 of IS 13395(Attachment to Cookware)	-	0	Already Mentioned
5.2 of IS 13395(Bending Strength)	-	0	Already Mentioned
5.3 of IS 13395(Torque Strength)	-	0	Already Mentioned
5.4 of IS 13395(Impact Strength)	-	0	Already Mentioned
5.5 of IS 13395(Fatigue Resistance 15 000 cycles withstand)	-	0	Already Mentioned
5.6 of IS 13395(Leakage)	-	0	Already Mentioned
5.7 of IS 13395(Thermal Insulation)	-	0	Already Mentioned
5.8 of IS 13395(Heat Resistance)	-	0	Already Mentioned
5.9 of IS 13395(Washing Resistance)	-	0	Already Mentioned
5.10 of IS 13395(Burning Resistance)	-	0	Already Mentioned
5.5(Material comes in contact with food)	-	0	Already Mentioned
6.1(Staining Test)	-	0	Already Mentioned
6.2(Mechanical Shock Test)	-	0	Already Mentioned
6.3(Thermal Shock Test)	-	0	Already Mentioned
6.4(Dry Heat Test)	-	0	Already Mentioned
6.6(Heat test)	-	0	Already Mentioned
6.7.1(Nominal Capacity Test)	-	0	Already Mentioned
6.7.2(Internal diameter of utensil)	-	0	Already Mentioned
Cl 3.1(Material used for manufacturing utensils)	-	0	-
Cl 3.2(Material used for composite bottom)	-	0	-
Cl 3.3(Material used for body of utensil of 3-ply construction)	-	0	-
Cl 3.4(Material used for stainless steel lid)	-	0	-
Cl 3.5(Material used for tempered glass lid)	-	0	-
Cl 3.5(Material used for stainless steel rim)	-	0	-
Cl 4.2 & Table 1(Minimum Sheet Thickness for Body of Utensil)	-	0	-
Cl 4.2 & Table 2(Minimum Sheet Thickness for Lid of Utensil)	-	0	-
Cl 4.2(Thickness of the finished utensil)	-	0	-
Cl 4.3(Classification)	-	0	-
Cl 4.4 (i)(Thickness of Aluminium disc/core)	-	0	-
Cl 4.4 (ii)(Thickness of Protector/cowl)	-	0	-
Cl 4.5(Minimum sheet thickness (3-ply utensil))	-	0	-
Cl 4.5(Thickness of finished utensil (3-ply utensil))	-	0	-
Cl 5.1(Manufacturing defect & visual appearance)	-	0	-
CL 5.2(Accessibility for cleaning)	-	0	-
Cl 5.3(Joining of handles to the utensils)	-	0	-
Cl 5.4(Requirement for handles)	-	0	-
Cl 5.5(Welding (Finish))	-	0	-
Cl 5.6(Finish of 3-ply utensil)	-	0	-
Cl 5.7(Requirement for coating)	-	0	-
Cl 5.8(Coating thickness test)	-	0	-
Cl 5.8(Coating adhesion test)	-	0	-
Cl 5.8.1(Thermal shock test (Coating))	-	0	-
Cl 6.1(Staining Test (Type Test - Frequency Once in a Year))	-	0	-
Cl 6.2(Mechanical Shock Test (for Cladded Utensils Only))	-	0	-
Cl 6.3(Thermal Shock Test (for Cladded Utensils Only))	-	0	-
Cl 6.4(Dry Heat Test (for Cladded Utensils Only))	-	0	-
Cl 6.5(Coating Thickness Test (for Copper Deposit))	-	0	-
Cl 6.6(Thermal shock test (3-ply construction utensil body))	-	0	-
Cl 6.7(Nominal Capacity Test)	-	0	-
Cl 8(Marking)	-	0	-
3.1(a) Carbon)	-	0	-
3.1(b) Silicon)	-	0	-
3.1(c)Manganese)	-	0	-
3.1(d) Nickel)	-	0	-
3.1(Chromium)	-	0	-
3.1(Sulphu)	-	0	-
3.1(Phosphorus)	-	0	-
Stainless Steel Utensils - Specification (THIRD REVISION)(Copper)	-	0	-
3.1(Nitrogen)	-	0	-
3.2 a(a) Carbon)	-	0	-
3.2 a(b) Silicon)	-	0	-
68995(Manganese)	-	0	-
3.2 a(d) Nickel)	-	0	-
3.2 a(Chromium)	-	0	-
3.2 a(Sulphur)	-	0	-
3.2 a(g) Phosphorus)	-	0	-
3.2 a(h) Copper)	-	0	-
3.2 a(Nitrogen)	-	0	-
3.2 b(a) Aluminium)	-	0	-
3.2 b(b) Copper)	-	0	-
3.2 b(c) Magnesium)	-	0	-
3.2 b(d) Silicon)	-	0	-
3.2 b(e) Iron)	-	0	-
3.2 b(f) Manganese)	-	0	-
3.2 b(d) Silicon)	-	0	-
3.2 b(e) Iron)	-	0	-
3.2 b(f) Manganese)	-	0	-
3.2 b(g) Zinc)	-	0	-
3.2 b(h) Titanium)	-	0	-
3.2 b(i) Chromium)	-	0	-
3.2 b(j) Cu+Si+Fe+Mn+Zn+mg)	-	0	-
3.2 b(k) Lead)	-	0	-
3.2 c(a) Carbon)	-	0	-
3.2 c(b) Silicon)	-	0	-
3.2 c(c) Manganese)	-	0	-
3.2 c(d) Nickel)	-	0	-
3.2 c(e) Chromium)	-	0	-
3.2 c(f) Sulphur)	-	0	-
3.2 c(g) Phosphorus)	-	0	-
3.3(a) Inner layer)	-	0	-
3.3(b) Middlelayer)	-	0	-
3.3(c) Outerlayer)	-	0	-
3.4(a) Carbon)	-	0	-
3.4(b) Silicon)	-	0	-
3.4(c) Manganese)	-	0	-
3.4(d) Nickel)	-	0	-
3.4(e) Chromium)	-	0	-
3.4(f) Sulphur)	-	0	-
3.4(g) Phosphorus)	-	0	-
3.4(h) Copper)	-	0	-
3.4(i) Nitrogen)	-	0	-
3.4(Thickness stainless steel lid)	-	0	-
3.5(If the utensils provided with tempered glass lid)	-	0	-
4.1(Shapes and Dimensions)	-	0	-
4.2(Thickness of the sheet)	-	0	-
4.3(Classifications)	-	0	-
4.3(Core Thickness for 3-ply Construction (asper IS15960))	-	0	-
4.3(Thickness of protective layer (as per IS 15960))	-	0	-
4.4(Thickness of 3ply full body utensil)	-	0	-
5(Workmanship and finish)	-	0	-
5.4(Handles)	-	0	-
4.1 of IS 13395(Construction)	-	0	-
4.2 of IS 13395(Materials)	-	0	-
4.3 of IS 13395(Selection and Size)	-	0	-
4.4 of Is 13395(Position of Handle and Knob with Respect to Cookware)	-	0	-
4.5 of IS 13395(Attachment to Cookware)	-	0	-
5.2 of IS 13395(Bending Strength)	-	0	-
5.3 of IS 13395(Torque Strength)	-	0	-
5.4 of IS 13395(Impact Strength)	-	0	-
5.5 of IS 13395(Fatigue Resistance 15 000 cycles withstand)	-	0	-
5.6 of IS 13395(Leakage)	-	0	-
5.7 of IS 13395(Thermal Insulation)	-	0	-
5.8 of IS 13395(Heat Resistance)	-	0	-
5.9 of IS 13395(Washing Resistance)	-	0	-
5.10 of IS 13395(Burning Resistance)	-	0	-
5.5(Material comes in contact with food)	-	0	-
6.1(Staining Test)	-	0	-
6.2(Mechanical Shock Test)	-	0	-
6.3(Thermal Shock Test)	-	0	-
6.4(Dry Heat Test)	-	0	-
6.6(Heat test)	-	0	-
6.7.1(Nominal Capacity Test)	-	0	-
6.7.2(Internal diameter of utensil)	-	0	-
Cl 3.1(Material used for manufacturing utensils)	-	0	-
Cl 3.2(Material used for composite bottom)	-	0	-
Cl 3.3(Material used for body of utensil of 3-ply construction)	-	0	-
Cl 3.4(Material used for stainless steel lid)	-	0	-
Cl 3.5(Material used for tempered glass lid)	-	0	-
Cl 3.5(Material used for stainless steel rim)	-	0	-
Cl 4.2 & Table 1(Minimum Sheet Thickness for Body of Utensil)	-	0	-
Cl 4.2 & Table 2(Minimum Sheet Thickness for Lid of Utensil)	-	0	-
Cl 4.2(Thickness of the finished utensil)	-	0	-
Cl 4.3(Classification)	-	0	-
Cl 4.4 (i)(Thickness of Aluminium disc/core)	-	0	-
Cl 4.4 (ii)(Thickness of Protector/cowl)	-	0	-
Cl 4.5(Minimum sheet thickness (3-ply utensil))	-	0	-
Cl 4.5(Thickness of finished utensil (3-ply utensil))	-	0	-
Cl 5.1(Manufacturing defect & visual appearance)	-	0	-
CL 5.2(Accessibility for cleaning)	-	0	-
Cl 5.3(Joining of handles to the utensils)	-	0	-
Cl 5.4(Requirement for handles)	-	0	-
Cl 5.5(Welding (Finish))	-	0	-
Cl 5.6(Finish of 3-ply utensil)	-	0	-
Cl 5.7(Requirement for coating)	-	0	-
Cl 5.8(Coating thickness test)	-	0	-
Cl 5.8(Coating adhesion test)	-	0	-
Cl 5.8.1(Thermal shock test (Coating))	-	0	-
Cl 6.1(Staining Test (Type Test - Frequency Once in a Year))	-	0	-
Cl 6.2(Mechanical Shock Test (for Cladded Utensils Only))	-	0	-
Cl 6.3(Thermal Shock Test (for Cladded Utensils Only))	-	0	-
Cl 6.4(Dry Heat Test (for Cladded Utensils Only))	-	0	-
Cl 6.5(Coating Thickness Test (for Copper Deposit))	-	0	-
Cl 6.6(Thermal shock test (3-ply construction utensil body))	-	0	-
Cl 6.7(Nominal Capacity Test)	-	0	-
Cl 8(Marking)	-	0	-
3.1(a) Carbon)	-	0	-
3.1(b) Silicon)	-	0	-
3.1(c)Manganese)	-	0	-
3.1(d) Nickel)	-	0	-
3.1(Chromium)	-	0	-
3.1(Sulphu)	-	0	-
3.1(Phosphorus)	-	0	-
Stainless Steel Utensils - Specification (THIRD REVISION)(Copper)	-	0	-
3.1(Nitrogen)	-	0	-
3.2 a(a) Carbon)	-	0	-
3.2 a(b) Silicon)	-	0	-
68995(Manganese)	-	0	-
3.2 a(d) Nickel)	-	0	-
3.2 a(Chromium)	-	0	-
3.2 a(Sulphur)	-	0	-
3.2 a(g) Phosphorus)	-	0	-
3.2 a(h) Copper)	-	0	-
3.2 a(Nitrogen)	-	0	-
3.2 b(a) Aluminium)	-	0	-
3.2 b(b) Copper)	-	0	-
3.2 b(c) Magnesium)	-	0	-
3.2 b(d) Silicon)	-	0	-
3.2 b(e) Iron)	-	0	-
3.2 b(f) Manganese)	-	0	-
3.2 b(d) Silicon)	-	0	-
3.2 b(e) Iron)	-	0	-
3.2 b(f) Manganese)	-	0	-
3.2 b(g) Zinc)	-	0	-
3.2 b(h) Titanium)	-	0	-
3.2 b(i) Chromium)	-	0	-
3.2 b(j) Cu+Si+Fe+Mn+Zn+mg)	-	0	-
3.2 b(k) Lead)	-	0	-
3.2 c(a) Carbon)	-	0	-
3.2 c(b) Silicon)	-	0	-
3.2 c(c) Manganese)	-	0	-
3.2 c(d) Nickel)	-	0	-
3.2 c(e) Chromium)	-	0	-
3.2 c(f) Sulphur)	-	0	-
3.2 c(g) Phosphorus)	-	0	-
3.3(a) Inner layer)	-	0	-
3.3(b) Middlelayer)	-	0	-
3.3(c) Outerlayer)	-	0	-
3.4(a) Carbon)	-	0	-
3.4(b) Silicon)	-	0	-
3.4(c) Manganese)	-	0	-
3.4(d) Nickel)	-	0	-
3.4(e) Chromium)	-	0	-
3.4(f) Sulphur)	-	0	-
3.4(g) Phosphorus)	-	0	-
3.4(h) Copper)	-	0	-
3.4(i) Nitrogen)	-	0	-
3.4(Thickness stainless steel lid)	-	0	-
3.5(If the utensils provided with tempered glass lid)	-	0	-
4.1(Shapes and Dimensions)	-	0	-
4.2(Thickness of the sheet)	-	0	-
4.3(Classifications)	-	0	-
4.3(Core Thickness for 3-ply Construction (asper IS15960))	-	0	-
4.3(Thickness of protective layer (as per IS 15960))	-	0	-
4.4(Thickness of 3ply full body utensil)	-	0	-
5(Workmanship and finish)	-	0	-
5.4(Handles)	-	0	-
4.1 of IS 13395(Construction)	-	0	-
4.2 of IS 13395(Materials)	-	0	-
4.3 of IS 13395(Selection and Size)	-	0	-
4.4 of Is 13395(Position of Handle and Knob with Respect to Cookware)	-	0	-
4.5 of IS 13395(Attachment to Cookware)	-	0	-
5.2 of IS 13395(Bending Strength)	-	0	-
5.3 of IS 13395(Torque Strength)	-	0	-
5.4 of IS 13395(Impact Strength)	-	0	-
5.5 of IS 13395(Fatigue Resistance 15 000 cycles withstand)	-	0	-
5.6 of IS 13395(Leakage)	-	0	-
5.7 of IS 13395(Thermal Insulation)	-	0	-
5.8 of IS 13395(Heat Resistance)	-	0	-
5.9 of IS 13395(Washing Resistance)	-	0	-
5.10 of IS 13395(Burning Resistance)	-	0	-
5.5(Material comes in contact with food)	-	0	-
6.1(Staining Test)	-	0	-
6.2(Mechanical Shock Test)	-	0	-
6.3(Thermal Shock Test)	-	0	-
6.4(Dry Heat Test)	-	0	-
6.6(Heat test)	-	0	-
6.7.1(Nominal Capacity Test)	-	0	-
6.7.2(Internal diameter of utensil)	-	0	-

26 Aug, 2027

-
Included w.e.f.17.06.2025

3419

LUCID LABORATORIES PRIVATE LIMITED, HYDERABAD

6121636

IS 1161 (2014)

Steel tubes for structural purposes - Specification (Fifth Revision)

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 AND AS PER IS 10748(CARBON)	-	300	-
Clause - 5.1, Table-3(SULPHUR)	-	300	-
Clause - 5.1, Table-3(PHOSPHURS)	-	300	-
Clause - 5.1, Table-3(MANGANESE)	-	300	-
Clause - 5.1, Table-3(SILICON)	-	300	-
Clause - 5.1, Table-3( ALUMINIUM)	-	300	-
5 AND AS PER IS 10748(CARBON EQUIVALENT)	-	300	-
5 AND AS PER IS 10748(MICRO ALLOY)	-	500	-
Cl 6(Outer Diameter, Thickness & Mass)	-	500	-
Cl 7(Workmanship)	-	500	-
8 AND AS PER IS 4736(MASS OF ZINC COATING)	-	1000	-
8 AND AS PER IS 4736(UNIFORMITY OF ZINC COATING)	-	1000	-
9(Straightness)	-	500	-
10(Lengths)	-	500	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	300	-
Cl. 11.2 Table 2(Yield strength)	-	250	-
Clause 11.2, Table -2(Elongation)	-	250	-
Cl 11.3.1(Cold bend test (upto & including 50 mm NB))	-	500	-
Cl 11.3.1(Flattening test (over 50 mm NB))	-	600	-

19 Apr, 2028

-
-

3420

LUCID LABORATORIES PRIVATE LIMITED, HYDERABAD

6121636

IS 15500 : Part 1 to 8 (2004)

Deepwell handpumps, components and special tools - Specification

97000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2/2.3,(Refer 15500(Part 1 to 8)& 5 (Part 1)(Raw material)	-	1000	NIL
2/2.3,(Refer 15500(Part 1 to 8)& 9.4 (Part 1)(Dimensions & critical dimensions in conformance with the relevant figures in Part 4.)	-	900	NIL
2/2.3,(Refer fig 4.1 of Part4) & 9.4 (Part 1)(Dimensions of FIG.4.1 HEAD— STANDARD(For SDWP, VLOM-65 and VLOM-50))	-	900	NIL
2/2.3,(Refer fig 4.2 of Part4)(Dimensions of FIG. 4,2 HEAD— EWDP)	-	900	NIL
2/2.3,(Refer fig 4.3A of Part4)(Dimensions of Fig 4.3A Side Plate)	-	900	NIL
2/2.3,(Refer fig 4.3B of Part4)(Dimensions of Fig 4.3B Head Flange)	-	900	NIL
2/2.3,(Refer fig 4.3C of Part4)(Dimensions of Fig 4.3C Back Plate —Standard (For SDWP, VLOM-65 & VLOM-50))	-	500	NIL
2/2.3,(Refer fig 4.3D of Part4)(Dimensions of Fig 4.3D Bracket — Standard (For SDWP, VLOM-65 & VLOM-50))	-	500	NIL
2/2.3,(Refer fig 4.3E of Part4)(Dimensions of Fig 4.3E Back Plate — EDWP)	-	500	NIL
2/2.3,(Refer fig 4.3F of Part4)(Dimensions of Fig 4.3F Bracket — EDWP)	-	500	NIL
2/2.3,(Refer fig 4.3G of Part4)(Dimensions of Fig 4.3G Axle Bust — Right)	-	500	NIL
2/2.3,(Refer fig 4.3H of Part4)(Dimensions of Fig 4.3H Axle Bust — Left)	-	500	NIL
2/2.3,(Refer fig 4.3I of Part4)(Dimensions of Fig 4.3 I Front Top End Plate)	-	500	NIL
2/2.3,(Refer fig 4.3IJof Part4)(Dimensions of 4.3J Front Bottom End Plate)	-	500	NIL
2/2.3,(Refer fig 4.3IKof Part4)(Dimensions of Fig 4.3K Gusset — Standard w (For SDWP, VLOM-65 & VLOM-50))	-	500	NIL
2/2.3,(Refer fig 4.3L Jof Part4)(Dimensions of Fig 4.3L Gusset — EDWP (For EDWP) )	-	500	NIL
2/2.3,(Refer fig 4.4 Jof Part4)(Dimensions of FIG. 4.4 FRONTCOVER)	-	500	NIL
2/2.3,(Refer fig 4.5A of Part4)(Dimensions of FIG. 4.5A Flange for Third Plate)	-	500	NIL
2/2.3,(Refer fig 4.5 B of Part4)(Dimensions of FIG. 4.5B Guide Bush )	-	500	NIL
2/2.3,(Refer fig 4.6 of Part4)(Dimensions of FIG.4.6 HANDLE— STANDARD (For SDWP, VLOM-65 & VLOM-50))	-	500	NIL
2/2.3,(Refer fig 4.7 of Part4)(Dimensions of FIG.4.7 HANDLE— EDWP)	-	500	NIL
2/2.3,(Refer fig 4.8A of Part4)(Dimensions of FIG 4.8A Handle Bar — Standard (For SDWR VLOM-65 & VLOM-50))	-	500	NIL
2/2.3,(Refer fig 4.8B of Part4)(Dimensions of FIG 4.8B Handle Bar — EDWP)	-	500	NIL
2/2.3,(Refer fig 4.8C of Part4)(Dimensions of FIG 4.8C Chain Guide)	-	500	NIL
2/2.3,(Refer fig 4.8 D of Part4)(Dimensions of Fig 4.8D Bearing Housing )	-	500	NIL
2/2.3,(Refer fig 4.9 of Part4)(Dimensions of FIG. 4.9 CHAIN WITH COUPLING)	-	850	NIL
2/2.3,(Refer fig 4.10 of Part4)(Dimensions of FIG. 4.10 T-BAR (For EDWP only))	-	850	NIL
2/2.3,(Refer fig 4.11 of Part4)(Dimensions of FIG; 4.11 COUNTER WEIGHT (For EDWP only))	-	850	NIL
2/2.3,(Refer fig 4.12A of Part4)(Dimensions of Fig 4.1 2A Telescopic Stand — Standard (For borewell with 150 NB casing pipe)(For SDWP, VLOM-65 & VLOM-50))	-	850	NIL
2/2.3,(Refer fig 4.12B of Part4)(Dimensions of Fig 4.12B Normal Stand — Standard (For borewell with 1001125 NB casing pipe) (For SDWP, VLOM-65 & VLOM-50))	-	850	NIL
2/2.3,(Refer fig 4.13A of Part4)(Dimensions of Fig 4.1 3A Telescopic Stand — EDWP (For borewell with 150 NB casing pipe) FOR EDWP )	-	850	NIL
2/2.3,(Refer fig 4.13B of Part4)(Dimensions of Fig 4.1 3B Normal Stand — EDWP (For borewell with 100/125 NB casing pipe) FOR EDWP )	-	850	NIL
2/2.3,(Refer fig 4.14 A of Part4)(Dimensions of Fig 4.1 4A Stand Pipe — Standard (For SDWP, VLOM-65, VLOM-50))	-	850	NIL
2/2.3,(Refer fig 4.14 B of Part4)(Dimensions of Fig 4.14B Stand Pipe — EDWP (For EDWP))	-	850	NIL
2/2.3,(Refer fig 4.14 C of Part4)(Dimensions of Fig 4.14C Stand Flange)	-	850	NIL
2/2.3,(Refer fig 4.14 D of Part4)(Dimensions of Fig 4.14D Leg)	-	850	NIL
2/2.3,(Refer fig 4.14 E of Part4)(Dimensions of Fig 4.14E Gusset)	-	850	NIL
2/2.3,(Refer fig 4.14 F of Part4)(Dimensions of Fig 4.1 4F Reducer Coller)	-	850	NIL
2/2.3,(Refer fig 4.14 G of Part4)(Dimensions of Fig 4.14G Spike)	-	850	NIL
2/2.3,(Refer fig 4.15 of Part4)(Dimensions of FIG, 4.15 WATER TANK — 32 (For SDWP & EDWP))	-	850	NIL
2/2.3,(Refer fig 4.16 of Part4)(Dimensions of FIG. 4.16 WATERTANK— 50)	-	850	NIL
2/2.3,(Refer fig 4.17 of Part4)(Dimensions of FIG. 4.17 WATERTANK— 65)	-	850	NIL
2/2.3,(Refer fig 4.18A of Part4)(Dimensions of FIG. 4.1 8A Tank Pipe )	-	850	NIL
2/2.3,(Refer fig 4.18B of Part4)(Dimensions of FIG. 4.18B Tank Top Flange)	-	850	NIL
2/2.3,(Refer fig 4.18C of Part4)(Dimensions of FIG. 4.18C Spout)	-	850	NIL
2/2.3,(Refer fig 4.18D of Part4)(Dimensions of FIG 4.1 8D Gusset)	-	500	NIL
2/2.3,(Refer fig 4.18E of Part4)(Dimensions of FIG 4.18E Tank Bottom Flanae — 32 (For SWDP & EDW~))	-	850	NIL
2/2.3,(Refer fig 4.18F of Part4)(Dimensions of FIG 4.1 8F Riser Pipe Holder — 32 (For SWDP & EDWP))	-	850	NIL
2/2.3,(Refer fig 4.18G of Part4)(Dimensions of FIG 4. 18G Riser Pipe Holder — 50)	-	850	NIL
2/2.3,(Refer fig 4.18H of Part4)(Dimensions of FIG 4.1 8H Tank Bottom Flange — 50)	-	850	NIL
2/2.3,(Refer fig 4.18I of Part4)(Dimensions of FIG 4.18I Tank Bottom Flange — 65 )	-	850	NIL
2/2.3,(Refer fig 4.18J of Part4)(Dimensions of FIG 4.18J Riser Pipe Holder — 65 )	-	850	NIL
2/2.3,(Refer fig 4.19 of Part4)(Dimensions of FIGFIG. 4.19 CONE PLATE)	-	850	NIL
2/2.3,(Refer fig 4.20 A of Part4)(Dimensions of FIG 4.20A Cone Flange)	-	850	NIL
2/2.3,(Refer fig 4.20 B of Part4)(Dimensions of FIG 4.20B Steel Cone)	-	850	NIL
2/2.3,(Refer fig 4.21 of Part4)(Dimensions of FIG. 4.21 CONNECTING ROD)	-	850	NIL
2/2.3,(Refer fig 4.22of Part4)(Dimensions of FIG. 4.22 PLUNGER ROD — STANDARD (For SDWP))	-	850	NIL
2/2.3,(Refer fig 4.23of Part4)(Dimensions of FIG.4.23 PLUNGERROD — LONG (For EDWP, VLOM-65 & VLOM-50 ))	-	850	NIL
2/2.3,(Refer fig 4.24of Part4)(Dimensions of FIG. 4.24 HANDLEAXE )	-	850	NIL
2/2.3,(Refer fig 4.25 of Part4)(Dimensions of FIG. 4.25 PUSHROD )	-	850	NIL
2/2.3,(Refer fig 4.26 of Part4)(Dimensions of FIG. 4.26 BEARINGSPACER)	-	850	NIL
2/2.3,(Refer fig 4.27 of Part4)(Dimensions of FIG.4.27 WASHER)	-	850	NIL
2/2.3,(Refer fig 4.28 of Part4)(Dimensions of FIG. 4.28 SOCKET— 32 (For SDWP & EDWP))	-	850	NIL
2/2.3,(Refer fig 4.29 of Part4)(Dimensions of FIG. 4.29 SOCKET— 50 (For VLOM-50))	-	850	NIL
2/2.3,(Refer fig 4.30 of Part4)(Dimensions ofFIG. 4.30 SOCKET— 65 (For VLOM-65))	-	850	NIL
2/2.3,(Refer fig 5.1 of Part 5)(Dimensions of FIG. 5.1 CYLINDER BODY— STANDARD (For SDWP))	-	850	NIL
2/2.3,(Refer fig 5.2 of Part 5)(Dimensions of FIG. 5.2 CYLINDERBODY— LONG (For EDWP & VLOM-65))	-	850	NIL
2/2.3,(Refer fig 5.3 of Part 5)(Dimensions of FIG. 5.3 CYLINDERBODY— VLOM-50)	-	850	NIL
2/2.3,(Refer fig 5.4 of Part 5)(Dimensions of FIG. 5.4 REDUCERCAP (For SDWP & EDWP) )	-	850	NIL
2/2.3,(Refer fig 5.5A of Part 5)(Dimensions of FIG. 5.5 A CYLINDERCAPS— VLOM-65 (For SDWP & EDWP))	-	850	NIL
2/2.3,(Refer fig 5.5B of Part 5)(Dimensions of FIG. 5.5 BCYLINDERCAPS— V LOM-65 (For SDWP & EDWP))	-	850	NIL
2/2.3,(Refer fig 5.6 of Part 5)(Dimensions ofFIG. 5.6 CYLINDERCAPS— VLOM-50)	-	850	NIL
2/2.3,(Refer fig 6.1 of Part 6)(Dimensions of FIG. 6.1 A BRASS LINER)	-	850	NIL
2/2.3,(Refer fig 6.2 of Part 6)(Dimensions of FIG. 6.2 PLUNGERYOKE BODY (For SDWP, EDWP & VLOM-65))	-	850	NIL
2/2.3,(Refer fig 6.3 of Part 6)(Dimensions of FIG. 6.3 UPPERVALVE (For SDWP, EDWP & VLOM-65))	-	850	NIL
2/2.3,(Refer fig 6.4 of Part 6)(Dimensions of FIG. 6.4 BUCKETSPACER— STANDARII (For SDWP, EDWP & VLOM-65))	-	850	NIL
2/2.3,(Refer fig 6.5 of Part 6)(Dimensions of FIG.6.5 BUCKET SPACER — LOWER (For EDWP))	-	600	NIL
2/2.3,(Refer fig 6.6 of Part 6)(Dimensions of FIG. 6.6 FOLLOWER — SDWP )	-	600	NIL
2/2.3,(Refer fig 6.7 of Part 6)(Dimensions of FIG. 6.7 FOLLOWER— EDWP)	-	600	NIL
2/2.3,(Refer fig 6.9 of Part 6)(Dimensions of FIG. 6.9 CHECK VALVE— STANDARD (For SDWP & EDWP) )	-	600	NIL
2/2.3,(Refer fig 6.10 of Part 6)(Dimensions of FIG. 6.10 CHECKVALVE— VLOM-65)	-	600	NIL
2/2.3,(Refer fig 6.11 of Part 6)(Dimensions of FIG. 6.11 RUBBERSEATRETAINER (For SDWP & EDWP))	-	600	NIL
2/2.3,(Refer fig 6.12 of Part 6)(Dimensions of FIG. 6.12 CHECK VALVE SEAT— STAN~AR~ (For SDWP & EDWP))	-	600	NIL
2/2.3,(Refer fig 6.13 of Part 6)(Dimensions of FIG. 6.13 CHECK VALVE — VLOM-65)	-	600	NIL
2/2.3,(Refer fig 6.14 of Part 6)(Dimensions of FIG. 6.14 CAGE (For VLOM-65))	-	600	NIL
2/2.3,(Refer fig 6.15 of Part 6)(Dimensions of FIG. 6.15 PLUNGERVALVE BODY— VLOM-50)	-	600	NIL
2/2.3,(Refer fig 6.16 of Part 6)(Dimensions of FIG. 6.16 CHECKVALVE BODY— VLOM-50)	-	600	NIL
2/2.3,(Refer fig 7.1 of Part 7)(Dimensions of FIG. 7.1 PUMPBUCKET— STANDARD (For SDWP, EDWP & VLOM-65) )	-	600	NIL
2/2.3,(Refer fig 7.2 of Part 7)(Dimensions of FIG. 7.2 PUMP BUCKET — VLOM-50)	-	600	NIL
2/2.3,(Refer fig 7.3 of Part 7)(Dimensions of FIG. 7.3 SEALINGRING— STANDARD (For SDWP & EDWP))	-	600	NIL
2/2.3,(Refer fig 7.4 of Part 7)(Dimensions of FIG. 7.4 SEALING RING— VLOM-65)	-	600	NIL
2/2.3,(Refer fig 7.5 of Part 7)(Dimensions of FIG. 7.5 SEALINGRING— VLOM-50)	-	600	NIL
2/2.3,(Refer fig 7.6 of Part 7)(Dimensions of FIG. 7.6 UPPERVALVE SEATING (For SDWP, EDWP & VLOM-65))	-	600	NIL
2/2.3,(Refer fig 7.7 of Part 7)(Dimensions of FIG. 7.7 LOWERVALVE SEATING— STANDARD (For SDWP & EDWP) )	-	600	NIL
2/2.3,(Refer fig 7.8 of Part 7)(Dimensions of FIG. 7.8 LOWERVALVE SEATING— VLOM-65 68)	-	600	NIL
2/2.3,(Refer fig 7.9 of Part 7)(Dimensions ofFIG. 7.9 BOBBIN (For VLOM-50))	-	600	NIL
2/2.3,(Refer fig 7.10 of Part 7)(Dimensions of FIG. 7.10 O-RING— VLOM-65)	-	600	NIL
2/2.3,(Refer fig 7.11 of Part 7)(Dimensions of FIG. 7.11 O-RING—VLOM-50)	-	600	NIL
2/2.3,(Refer fig 7.12 of Part 7)(Dimensions of FIG. 7.12 RUBBER CONE— VLOM-65 )	-	600	NIL
2/2.3,(Refer fig 7.13 of Part 7)(Dimensions of FIG. 7.13 RUBBERCONE— VLOM-50)	-	600	NIL
2/2.3,(Refer fig 7.14 of Part 7)(Dimensions of FIG. 7.14 PIPE CENTRALIZER— VLOM-65 )	-	600	NIL
2/2.3,(Refer fig 7.15 of Part 7)(Dimensions of FIG.7.15 PIPECENTRALIZER— VLOM-50 )	-	600	NIL
3/3.3.1,(Refer Cl 9.4.1 and 9.4.3 15500(Part 1 )(Head and Cylinder Assemblies)	-	600	NIL
6.2 of Part 1 ,Refer IS 4759(Galvanizing)	-	600	NIL
6.2.1 of Part 1,Refer Cl 5.9 of IS 2629(Galvanizing)	-	600	NIL
9.2 of Part1, (Visual Tests)	-	600	NIL
2/2.3 ,Refer Fig 3.1(Dimensions of FIG.4.1 HEAD— STANDARD(For SDWP, VLOM-65 and VLOM-50))	-	600	NIL
2/2.3 ,Refer Fig 3.1(Dimensions of FIG. 4.4 FRONT COVER)	-	600	NIL
2/2.3 ,Refer Fig 3.1(Dimensions of FIG. 4.24 HANDLE AXE )	-	600	NIL
2/2.3 ,Refer Fig 3.1(Dimensions of FIG.4.27 WASHER)	-	600	NIL
2/2.3 ,Refer Fig 3.1 and Refer annex B( HexagonaI Nut — )	-	600	NIL
2/2.3 ,Refer Fig 3.3 and annex B(Hexagonal Bolt)	-	600	NIL
2/2.3 ,Refer Fig 3.1 and 3.2(Dimensions of FIG.4.6 HANDLE— STANDARD (For SDWP, VLOM-65 & VLOM-50))	-	600	NIL
2/2.3 ,Refer Fig 3.1 and 3.2(Dimensions of FIG. 4.9 CHAIN WITH COUPLING)	-	600	NIL
2/2.3 ,Refer Fig 3.1 and 3.2(Dimensions of FIG. 4.26 BEARING SPACER)	-	600	NIL
2/2.3 ,Refer Fig 3.1 and 3.2,Annex B(Prevailing Torque Type Hex. Nut)	-	600	NIL
2/2.3 ,Refer Fig 3.3 and 3.4(Hex. Bolt —)	-	500	NIL
2/2.3 ,Refer Fig 3.3 and 3.4(Ball bearing, single side shielded)	-	500	NIL
2/2.3 ,Refer Fig 3.5(Dimensions of FIG. 4.22 PLUNGER ROD — STANDARD (For SDWP))	-	500	NIL
2/2.3 ,Refer Fig 3.5(Dimensions of FIG. 5.1 CYLINDER BODY— STANDARD (For SDWP))	-	500	NIL
2/2.3 ,Refer Fig 3.5(Dimensions of FIG. 5.4 REDUCERCAP (For SDWP & EDWP) )	-	500	NIL
2/2.3 ,Refer Fig 3.5(Dimensions of FIG. 6.1 BRASS LINER)	-	500	NIL
2/2.3 ,Refer Fig 3.5(Dimensions of FIG. 7.3 SEALINGRING— STANDARD (For SDWP & EDWP))	-	500	NIL
2/2.3 ,Refer Fig 3.5 and 3.6(Dimensions of FIG. 6.2 PLUNGERYOKE BODY (For SDWP, EDWP & VLOM-65))	-	500	NIL
2/2.3 ,Refer Fig 3.5 and 3.6(Dimensions of FIG. 6.3 UPPERVALVE (For SDWP, EDWP & VLOM-65))	-	500	NIL
2/2.3 ,Refer Fig 3.5 and 3.6(Dimensions of FIG. 6.4 BUCKETSPACER— STANDARII (For SDWP, EDWP & VLOM-65))	-	500	NIL
2/2.3 ,Refer Fig 3.5 and 3.6(Dimensions of FIG. 6.6 FOLLOWER — SDWP )	-	500	NIL
2/2.3 ,Refer Fig 3.5 and 3.6(Dimensions of FIG. 6.9 CHECK VALVE— STANDARD (For SDWP & EDWP) )	-	500	NIL
2/2.3 ,Refer Fig 3.5 and 3.6(Dimensions of FIG. 6.11 RUBBERSEATRETAINER (For SDWP & EDWP))	-	500	NIL
2/2.3 ,Refer Fig 3.5 and 3.6(Dimensions of FIG. 6.12 CHECK VALVE SEAT— STAN~AR~ (For SDWP & EDWP))	-	500	NIL
2/2.3 ,Refer Fig 3.5 and 3.6(Dimensions of FIG. 7.1 PUMPBUCKET— STANDARD (For SDWP, EDWP & VLOM-65) )	-	500	NIL
2/2.3 ,Refer Fig 3.5 and 3.6(Dimensions of FIG. 7.6 UPPERVALVE SEATING (For SDWP, EDWP & VLOM-65))	-	500	NIL
2/2.3 ,Refer Fig 3.5 and 3.6(Dimensions of FIG. 7.7 LOWERVALVE SEATING— STANDARD (For SDWP & EDWP) )	-	500	NIL
2/2.3 ,Refer Fig 3.7(Dimensions of FIG.4.23 PLUNGERROD — LONG (For EDWP, VLOM-65 & VLOM-50 ))	-	500	NIL
2/2.3 ,Refer Fig 3.7(Dimensions of FIG. 5.2 CYLINDERBODY— LONG (For EDWP & VLOM-65))	-	500	NIL
2/2.3 ,Refer Fig 3.7(Dimensions of FIG. 5.5 A Upper CAPS— VLOM-65 (For SDWP & EDWP))	-	500	NIL
2/2.3 ,Refer Fig 3.7(Dimensions of FIG. 5.5 B Bottomr CAPS— VLOM-65 (For SDWP & EDWP))	-	500	NIL
2/2.3 ,Refer Fig 3.7(Dimensions of FIG. 6.1 B BRASS LINER)	-	500	NIL
2/2.3 ,Refer Fig 3.7(Dimensions of FIG. 7.4 SEALING RING— VLOM-65)	-	500	NIL
2/2.3 ,Refer Fig 3.7 and 3.8(Dimensions of FIG. 6.2 PLUNGERYOKE BODY (For SDWP, EDWP & VLOM-65))	-	500	NIL
2/2.3 ,Refer Fig 3.9 and 3.10(Dimensions of FIG. 6.16 CHECKVALVE BODY— VLOM-50)	-	500	NIL
2/2.3 ,Refer Fig 3.9 and 3.10(Dimensions of FIG. 7.2 PUMP BUCKET — VLOM-50)	-	500	NIL
2/2.3 ,Refer Fig 3.7 and 3.8(Dimensions of FIG. 7.6 UPPERVALVE SEATING (For SDWP, EDWP & VLOM-65))	-	500	NIL
2/2.3 ,Refer Fig 3.7 and 3.8(Dimensions of FIG. 7.10 O-RING— VLOM-65)	-	500	NIL
2/2.3 ,Refer Fig 3.7 and 3.8(Check Nut)	-	500	NIL
2/2.3 ,Refer Fig 3.9(Dimensions of FIG.4.23 PLUNGERROD — LONG (For EDWP, VLOM-65 & VLOM-50 ))	-	500	NIL

19 Apr, 2028

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number