BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15122 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

3421

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 3757 (1985)

Specification for high strength structural bolts (Second Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2 Table-1,2(Dimensions- d)	-	5500	Table 1 and Table 2- Rs 5500/-
2 Table-1,2(Dimensions- p)	-	0	-
2 Table-1,2(Dimensions- bref)	-	0	-
2 Table-1,2(Dimensions- c)	-	0	-
2 Table-1,2(Dimensions- da)	-	0	-
2 Table-1,2(Dimensions- ds)	-	0	-
2 Table-1,2(Dimensions- dw)	-	0	-
2 Table-1,2(Dimensions- e)	-	0	-
2 Table-1,2(Dimensions- k)	-	0	-
2 Table-1,2(Dimensions- kw)	-	0	-
2 Table-1,2(Dimensions- r)	-	0	-
3 Table-1,2(Dimensions- s)	-	0	-
4 Table-1,2(Dimensions- z)	-	0	-
5 Table-1,2(Dimensions- ls)	-	0	-
6 Table-1,2(Dimensions- lg)	-	0	-
6 Table-1,2(Dimensions- l)	-	0	-
6 Table-1,2(Dimensions- Angle)	-	0	-
2.3(Conformity of threads)	-	0	-
4(Tensile Test for Machined Test pc- Stress at 0.2% non-propotional elongation)	-	12500	Clause 4, mechanical prop- total 12500/-
4(Tensile Test for Machined Test pc- Tensile Strength)	-	0	-
4(Tensile Test for Machined Test pc- Elongation)	-	0	-
4(Tensile Test for Machined Test pc- Reduction area)	-	0	-
4(Tensile test for full size bolt- Ultimate Tensile Strength)	-	0	-
4(Tensile test for full size bolt- Vicker's Hardness)	-	0	-
4(Tensile test for full size bolt- Breaking Position)	-	0	-
4(Proof load test)	-	0	-
4(Wedge Load Test)	-	0	-
4(Head soundness test)	-	0	-
4(Torsional test)	-	0	-
4(Surface Integrity Test )	-	0	-
4(Impact Test)	-	0	-
4(Retempering test)	-	0	-
5.1(Finish)	-	2500	-
5.2(Galvanization- Uniformity of Zinc Coating)	-	6500	Clause 5.2- total 6500/-
5.2(Galvanization - Mass of zinc coating)	-	0	-
5.2(Galvanization - Passivation Test)	-	0	-
5.2(Galvanization - Adhesion of Zinc Coating)	-	0	-
5.2(Galvanization - Adhesion of Zinc Coating)	-	0	-
5.2(Galvanization - Adhesion of Zinc Coating)	-	0	-
4(Hardness test )	-	0	-
4(Decarburization test)	-	0	-
4(Surface discountinuties test)	-	0	-
2 Table-1,2(Dimensions- d)	-	0	-
2 Table-1,2(Dimensions- p)	-	0	-
2 Table-1,2(Dimensions- bref)	-	0	-
2 Table-1,2(Dimensions- c)	-	0	-
2 Table-1,2(Dimensions- da)	-	0	-
2 Table-1,2(Dimensions- ds)	-	0	-
2 Table-1,2(Dimensions- dw)	-	0	-
2 Table-1,2(Dimensions- e)	-	0	-
2 Table-1,2(Dimensions- k)	-	0	-
2 Table-1,2(Dimensions- kw)	-	0	-
2 Table-1,2(Dimensions- r)	-	0	-
3 Table-1,2(Dimensions- s)	-	0	-
4 Table-1,2(Dimensions- z)	-	0	-
5 Table-1,2(Dimensions- ls)	-	0	-
6 Table-1,2(Dimensions- lg)	-	0	-
6 Table-1,2(Dimensions- l)	-	0	-
6 Table-1,2(Dimensions- Angle)	-	0	-
2.3(Conformity of threads)	-	0	-
4(Tensile Test for Machined Test pc- Stress at 0.2% non-propotional elongation)	-	0	-
4(Tensile Test for Machined Test pc- Tensile Strength)	-	0	-
4(Tensile Test for Machined Test pc- Elongation)	-	0	-
4(Tensile Test for Machined Test pc- Reduction area)	-	0	-
4(Tensile test for full size bolt- Ultimate Tensile Strength)	-	0	-
4(Tensile test for full size bolt- Vicker's Hardness)	-	0	-
4(Tensile test for full size bolt- Breaking Position)	-	0	-
4(Proof load test)	-	0	-
4(Wedge Load Test)	-	0	-
4(Head soundness test)	-	0	-
4(Torsional test)	-	0	-
4(Surface Integrity Test )	-	0	-
4(Impact Test)	-	0	-
4(Retempering test)	-	0	-
5.1(Finish)	-	0	-
5.2(Galvanization- Uniformity of Zinc Coating)	-	0	-
5.2(Galvanization - Mass of zinc coating)	-	0	-
5.2(Galvanization - Passivation Test)	-	0	-
5.2(Galvanization - Adhesion of Zinc Coating)	-	0	-
5.2(Galvanization - Adhesion of Zinc Coating)	-	0	-
5.2(Galvanization - Adhesion of Zinc Coating)	-	0	-
4(Hardness test )	-	0	-
4(Decarburization test)	-	0	-
4(Surface discountinuties test)	-	0	-

08 Feb, 2027

-
included w.e.f 05-01-2026

3422

Amit Test and Calibration Centre (8172006)

8172006

IS 2082 (2018)

Stationary storage type electric water heaters - Specification (Fifth Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
6(Classification )	-	100	-
6(Classification )	-	100	-
(Cl.8 of IS 302-2-21:2011)(Protection Against Access to Live Parts)	-	1000	-
(Cl.10 of IS 302-2-21: 2011)(Power Input & Current)	-	1000	-
(Cl.11 of 302-2-21:2011)(Heating)	-	1500	-
(Cl.11 of 302-2-21:2011)(Heating)	-	1500	-
(Cl.11 of 302-2-21:2011)(Heating)	-	1500	-
(Cl.13 of IS 302-2-21:2011)(Leakage Current )	-	600	-
(Cl.13 of IS 302-2-21:2011)(Electrical Strength at Operating Temperature)	-	1000	-
(Cl.14ofIS302-2-21:2011)(Transient Over Voltages)	-	1000	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	1000	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	1000	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	1000	-
(Cl.17 of IS 302-2-21:2011)(Overload protection of transformers & associated circuits)	-	1000	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	2000	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	2000	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	2000	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	2000	-
(Cl.20 of IS 302-2-21:2011)(Stability & Mechanical Hazards)	-	1000	-
(Cl.21ofIS302-2-21:2011)(Mechanical strength)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl.24ofIS302-221:2011)(Component)	-	500	-
(Cl.24ofIS302-221:2011)(Component)	-	500	-
(Cl.24ofIS302-221:2011)(Component)	-	500	-
(Cl.24ofIS302-221:2011)(Component)	-	500	-
(Cl.24ofIS302-221:2011)(Component)	-	500	-
(Cl.24ofIS302-221:2011)(Component)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	1000	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	1000	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	1000	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	1000	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	1000	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	1000	-
(Cl.28 of IS 302-2-21:2011)(Screws & Connections)	-	500	-
(Cl.29ofIS302-2-21:2011)(Clearances, Creepage Distances and Solid Insulation)	-	500	-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	800	-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	500	-
(Cl.31 of IS 302-2-21:2011)(Resistance to Rusting)	-	500	-
(Cl.15 of IS 2082:2018)(Verification of the Rated Capacity)	-	1000	-
(Cl.16 of IS 2082:2018)(Standing Loss per 24 Hours)	-	5000	-
(Cl.17 of IS 2082:2018)(Hot Water Output)	-	2000	-
(Cl.18 of IS 2082:2018)( Reheating Time)	-	2000	-
(Cl.19 of IS 2082:2018)(Mixing Factor)	-	2000	-
(Cl.20 of IS 2082:2018)(Deviation of Dial Calibration)	-	2000	-
(Cl.21 of IS 2082:2018)(Cyclic Temperature Variation)	-	2000	-
(Cl.22 of IS 2082:2018)(Finish)	-	2000	-
Cl.22 of IS 2082:2018(Finish)	-	2000	-
Cl.21 of IS 2082:2018(Cyclic Temperature Variation)	-	2000	-
Cl.20 of IS 2082:2018(Deviation of Dial Calibration)	-	2000	-
Cl.19 of IS 2082:2018(Mixing Factor)	-	2000	-
Cl.18 of IS 2082:2018( Reheating Time)	-	2000	-
Cl.17 of IS 2082:2018(Hot Water Output)	-	2000	-
Cl.16 of IS 2082:2018(Standing Loss per 24 Hours)	-	5000	-
Cl.15 of IS 2082:2018(Verification of the Rated Capacity)	-	1000	-
Cl.31 of IS 302-2-21:2018(Resistance to Rusting)	-	1000	-
Cl.30.2 of IS 302-1:2008(Resistance to Heat & Fire : Glow wire test )	-	1500	-
Cl.30.1 of IS 302-1:2008(Resistance to Heat & Fire : Ball pressure test )	-	1500	-
Cl.29.2 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage distance )	-	500	-
Cl.29.1 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance distance )	-	500	-
Cl.28 of IS 302-2-21:2018(Screws & Connections)	-	800	-
Cl.27.5 of IS 302-1:2008(Provision for Earthing : ECR )	-	1000	-
Cl.27 of IS 302-2-21:2018(Provision for Earthing)	-	1000	-
Cl.26 of IS 302-2-21: 2018(Terminals for External Conductors)	-	500	-
Cl.25.18 of IS 302-1:2008(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test - displacement )	-	1000	-
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test )	-	1000	-
Cl.25.12 of IS 302-1:2008(Supply Connection & External Flexible Cords : Moulding of supply cord )	-	1000	-
Cl.25.10 of IS 302-1:2008(Supply Connection & External Flexible Cords : Colour of Earthing conductor )	-	1000	-
Cl.25.8 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : Resistance of supply cord )	-	1000	-
Cl.25.5 of IS 302-1:2008(Supply Connection & External Flexible Cords : Type of attachment )	-	1000	-
Cl.25 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : connection to the supply mains)	-	1000	-
Cl.24.102 of IS 302-221:2018(Component : Operation of thermal cut-out )	-	500	-
Cl.24.101 of IS302-221:2018(Component : Location of non self reseting thermal cut out )	-	500	-
Cl.24of IS 302-221:2018(Component : Relevent Indian standards )	-	500	-
Cl. 23 of IS 302-1:2008(Internal Wiring : color identification for earthing conductor )	-	500	-
Cl. 23 of IS 302-1:2008(Internal Wiring )	-	500	-
Cl.22.111 of IS 302-2-21:2018(Construction : Resistance to vacuum )	-	2000	-
Cl.22.110 of IS 302-2-21:2018(Construction : meterial of connections )	-	2000	-
Cl.22.110 of IS 302-2-21:2018(Construction : Material of Inner conatiner )	-	2000	-
Cl.22.109 of IS 302-2-21:2018(Construction : Drain for appliance having a capacity of more than 15 liter)	-	2000	-
Cl.22.108 of IS 302-2-21:2018(Construction : fixing to wall )	-	2000	-
Cl.22.107 of IS 302-2-21:2018(Construction : Position of Heating elements and thermal control sensor)	-	2000	-
Cl.22.106 of IS 302-2-21:2018(Construction : Operation of thermal cut- out )	-	2000	-
Cl.22.104 of IS 302-2-21:2018(Construction : Outlet of open outlet heater )	-	2000	-
Cl.22.103 of IS 302-2-21:2018(Construction : Operation of Pressure relieve devices )	-	2000	-
Cl.22.102 of IS 302-2-21:2018(Construction : repeated drawing of water temp )	-	2000	-
Cl.22.101 of IS 302-2-21:2018(Construction : rated pressure of closed water heater )	-	2000	-
Cl.22.47 of IS 302-2-21:2018 (Construction : Water pressure test )	-	2000	-
Cl.22.44 of IS 302-1:2008(Construction : Shape and decoration of enclosure)	-	2000	-
Cl.22.34, Cl 22.35 of IS 302-1:2008(Construction : Shaft of operating Knobs )	-	2000	-
Cl.22.33 of IS 302-1:2008(Construction : Direct contact of liquids )	-	2000	-
Cl 22.26 ,Cl.22.28, Cl 22.29, Cl 22.30 , Cl 22.31, Cl 22.32 of IS 302-1:2008(Construction : Supplymentry/ double / reinforced insulation for Class II/ Class III appliance )	-	2000	-
Cl.22.18 Of IS 302-1:2008(Construction : Resistance to corrosion )	-	2000	-
Cl.22.17 of IS 302-1:2008(Construction : Spacers )	-	2000	-
Cl.22.14 of IS 302-1:2008(Construction : ragged or sharp edges)	-	2000	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knob, grips, levers and similar parts)	-	2000	-
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable part )	-	2000	-
Cl.22.7 of IS 302-1:2008(Construction: adequate safeguards against the risk of excessive pressure)	-	2000	-
Cl.22.6 of IS 302-2-21:2018(Construction : Size of drain hole )	-	2000	-
Cl.22.6 of IS 302-1:2008(Construction : Effect of water on 3 insulation )	-	2000	-
Cl.22.2 of IS 302-1:2008(Construction : Provision to ensure all pole disconnection )	-	2000	-
Cl.22.1 of IS 302-1:2008(Construction : IP test )	-	2000	-
Cl.21.2 of IS 302-1:2008(Mechanical strength : prevent penetration by sharp implements. )	-	1000	-
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	1000	-
Cl.20 of IS 302-1:2008(Stability & Mechanical Hazards)	-	1000	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : leakage from container during test)	-	2000	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : High Voltage )	-	2000	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Insulation of the supply cable or cord)	-	2000	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Wall ceiling temp. of test corner )	-	2000	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : emission of flame or molten metal or poisonous or ignitable gas )	-	2000	-
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	800	-
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Leakage current )	-	800	-
Cl.15 of IS 302-2-21-2018(Moisture Resistance)	-	1000	-
Cl.14 of IS 302-2-21:2018(Transient Over Voltages)	-	1000	-
Cl.13 of IS 302-2-21:2018(3 Strength at Operating Temperature)	-	1000	-
Cl.13 of IS 302-2-21:2018(Leakage Current )	-	800	-
Cl.11 of 302-2-21:2018(Heating : Room Temp.)	-	1500	-
Cl.11 of 302-2-21:2018(Heating : Temp of Rubber or PVC insulation of internal and external wiring)	-	1500	-
Cl.11 of 302-2-21:2018(Heating : Temp of Walls, ceilings and floor of the test corner )	-	1500	-
Cl.10 of IS 302-2-21: 2018(Power Input & Current)	-	2000	-
Cl.8 of IS 302-2-21:2018(Protection Against Access to Live Parts)	-	1000	-
7.101(Marking : Indifiction of water inlet and water outlet )	-	100	-
7.14(Marking : Legibility and durability)	-	100	-
7.13(Marking : Official language of Instruction )	-	100	-
7.11(Marking : Indication of controls )	-	100	-
7.8(Marking : Terminals )	-	100	-
7.6(Marking : Symbol used )	-	100	-
7.1(Marking : Warning for Open- outlet )	-	100	-
7.1(Marking : Statement for pressure reducing valve ( For rated pressure less than 0.6 MPa))	-	100	-
7.1(Marking : Statement for a pressure-relief device)	-	100	-
7.1(Marking : Rated capacity)	-	100	-
7.1(Marking : Rated pressure)	-	100	-
7.1(Marking : Country of manufacture)	-	100	-
7.1(Marking: IP Number)	-	100	-
7.1(Marking: Symbol for Class II)	-	100	-
7.1(Marking: Model or type reference)	-	100	-
7.1(Marking: Name, trademark or identification mark of manufacturer )	-	100	-
7.1(Marking : Rated power input)	-	100	-
7.1(Marking : Symbol for nature of supply )	-	100	-
7.1(Marking : Rated Voltage )	-	100	-
Cl.32 of IS 302-1:2008()	-	100	-
4(GENERAL REQUIREMENT)	-	100	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	100	-
12(THERMOSTAT SETTING)	-	100	-
Cl-10(Mounting of the water heater)	-	100	-
Cl-11(Measurements of stored water temperature)	-	1000	-
Cl-12(Thermostat setting)	-	100	-
Cl-13(Measurement of energy consumption)	-	1500	-
Cl-14(Verification of the rated capacity)	-	1000	-
(Cl.22 of IS 302-2-21:2018)(Constructions)	-	2000	-
(Cl.22 of IS 302-2-21:2018)(Constructions)	-	2000	-
(Cl.22.108 of IS 302-2-21:2018)(Constructions)	-	2000	-
(Cl.22.6 of IS 302-2-21:2018)(Constructions)	-	2000	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	2000	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	2000	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	2000	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	2000	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	2000	-
(Cl.22.101 of IS 302-2-21:2018)(Constructions)	-	2000	-
(Cl.22.105 of IS 302-2-21:2018)(Constructions)	-	2000	-
(Cl.22.101 of IS 302-2-21:2018)(Constructions)	-	2000	-
(Cl.22.103 of IS 302-2-21:2018)(Constructions)	-	2000	-
(Cl.22.104 of IS 302-2-21:2018)(Constructions)	-	2000	-
(Cl.22.104 of IS 302-2-21:2018)(Constructions)	-	2000	-
(Cl.22.105 of IS 302-2-21:2018)(Constructions)	-	2000	-
(Cl.22.109 of IS 302-2-21:2018)(Constructions)	-	2000	-
(Cl.24.101 of IS 302-2-21:2018)(Components)	-	500	-
(Cl.25 of IS 302-2-21:2018)(Supply Connection and External Flexible cords)	-	500	-
19.11.4.1(Electrostatic discharges)	-	500	-
19.11.4.2(Radiated fields)	-	500	-
19.11.4.3(Fast transient bursts)	-	500	-
19.11.4.4(Surge Immunity Test)	-	1000	-
19.11.4.5(Immunity to conductivity Discharge)	-	1000	-
19.11.4.6(Class 3 voltage dips and interruptions)	-	1000	-
19.11.4.7(Hormonics)	-	1000	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
6(Classification )	-	100	-
6(Classification )	-	100	-
(Cl.8 of IS 302-2-21:2011)(Protection Against Access to Live Parts)	-	1000	-
(Cl.10 of IS 302-2-21: 2011)(Power Input & Current)	-	1000	-
(Cl.11 of 302-2-21:2011)(Heating)	-	1000	-
(Cl.11 of 302-2-21:2011)(Heating)	-	1000	-
(Cl.11 of 302-2-21:2011)(Heating)	-	1000	-
(Cl.13 of IS 302-2-21:2011)(Leakage Current )	-	1000	-
(Cl.13 of IS 302-2-21:2011)(Electrical Strength at Operating Temperature)	-	1500	-
(Cl.14ofIS302-2-21:2011)(Transient Over Voltages)	-	1500	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	1500	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	1500	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	1500	-
(Cl.17 of IS 302-2-21:2011)(Overload protection of transformers & associated circuits)	-	1500	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	1000	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	1000	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	1000	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	1000	-
(Cl.20 of IS 302-2-21:2011)(Stability & Mechanical Hazards)	-	1000	-
(Cl.21ofIS302-2-21:2011)(Mechanical strength)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	100	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl.24ofIS302-221:2011)(Component)	-	1000	-
(Cl.24ofIS302-221:2011)(Component)	-	1000	-
(Cl.24ofIS302-221:2011)(Component)	-	1000	-
(Cl.24ofIS302-221:2011)(Component)	-	1000	-
(Cl.24ofIS302-221:2011)(Component)	-	1000	-
(Cl.24ofIS302-221:2011)(Component)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	1000	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	1000	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	1000	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	1000	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	1000	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	1000	-
(Cl.28 of IS 302-2-21:2011)(Screws & Connections)	-	1000	-
(Cl.29ofIS302-2-21:2011)(Clearances, Creepage Distances and Solid Insulation)	-	1000	-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	1500	-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	1500	-
(Cl.31 of IS 302-2-21:2011)(Resistance to Rusting)	-	1500	-
(Cl.15 of IS 2082:2018)(Verification of the Rated Capacity)	-	100	-
(Cl.16 of IS 2082:2018)(Standing Loss per 24 Hours)	-	2000	-
(Cl.17 of IS 2082:2018)(Hot Water Output)	-	2000	-
(Cl.18 of IS 2082:2018)( Reheating Time)	-	2000	-
(Cl.19 of IS 2082:2018)(Mixing Factor)	-	2000	-
(Cl.20 of IS 2082:2018)(Deviation of Dial Calibration)	-	2000	-
(Cl.21 of IS 2082:2018)(Cyclic Temperature Variation)	-	1500	-
(Cl.22 of IS 2082:2018)(Finish)	-	0	-
Cl.32 of IS 302-1:2008()	-	1000	-
4(GENERAL REQUIREMENT)	-	100	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	100	-
12(THERMOSTAT SETTING)	-	100	-
Cl-10(Mounting of the water heater)	-	1000	-
Cl-11(Measurements of stored water temperature)	-	1000	-
Cl-12(Thermostat setting)	-	1000	-
Cl-13(Measurement of energy consumption)	-	1000	-
Cl-14(Verification of the rated capacity)	-	100	-
(Cl.22 of IS 302-2-21:2018)(Constructions)	-	100	-
(Cl.22 of IS 302-2-21:2018)(Constructions)	-	100	-
(Cl.22.108 of IS 302-2-21:2018)(Constructions)	-	100	-
(Cl.22.6 of IS 302-2-21:2018)(Constructions)	-	100	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	100	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	100	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	100	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	100	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	100	-
(Cl.22.101 of IS 302-2-21:2018)(Constructions)	-	100	-
(Cl.22.105 of IS 302-2-21:2018)(Constructions)	-	100	-
(Cl.22.101 of IS 302-2-21:2018)(Constructions)	-	100	-
(Cl.22.103 of IS 302-2-21:2018)(Constructions)	-	100	-
(Cl.22.104 of IS 302-2-21:2018)(Constructions)	-	100	-
(Cl.22.104 of IS 302-2-21:2018)(Constructions)	-	100	-
(Cl.22.105 of IS 302-2-21:2018)(Constructions)	-	100	-
(Cl.22.109 of IS 302-2-21:2018)(Constructions)	-	100	-
(Cl.24.101 of IS 302-2-21:2018)(Components)	-	100	-
(Cl.25 of IS 302-2-21:2018)(Supply Connection and External Flexible cords)	-	100	-
7(Marking)	-	-	-
7(Marking)	-	-	-
7(Marking)	-	-	-
7(Marking)	-	-	-
7(Marking)	-	-	-
7(Marking)	-	-	-
7(Marking)	-	-	-
7(Marking)	-	-	-
7(Marking)	-	-	-
7(Marking)	-	-	-
7(Marking)	-	-	-
7(Marking)	-	-	-
7(Marking)	-	-	-
7(Marking)	-	-	-
7(Marking)	-	-	-
7(Marking)	-	-	-
7(Marking)	-	-	-
7(Marking)	-	-	-
7(Marking)	-	-	-
7(Marking)	-	-	-
7(Marking)	-	-	-
7(Marking)	-	-	-
7(Marking)	-	-	-
7(Marking)	-	-	-
7(Marking)	-	-	-
7(Marking)	-	-	-
7(Marking)	-	-	-
7(Marking)	-	-	-
6(Classification )	-	-	-
6(Classification )	-	-	-
(Cl.8 of IS 302-2-21:2011)(Protection Against Access to Live Parts)	-	-	-
(Cl.10 of IS 302-2-21: 2011)(Power Input & Current)	-	-	-
(Cl.11 of 302-2-21:2011)(Heating)	-	-	-
(Cl.11 of 302-2-21:2011)(Heating)	-	-	-
(Cl.11 of 302-2-21:2011)(Heating)	-	-	-
(Cl.13 of IS 302-2-21:2011)(Leakage Current )	-	-	-
(Cl.13 of IS 302-2-21:2011)(Electrical Strength at Operating Temperature)	-	-	-
(Cl.14ofIS302-2-21:2011)(Transient Over Voltages)	-	-	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	-	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	-	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	-	-
(Cl.17 of IS 302-2-21:2011)(Overload protection of transformers & associated circuits)	-	-	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	-	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	-	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	-	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	-	-
(Cl.20 of IS 302-2-21:2011)(Stability & Mechanical Hazards)	-	-	-
(Cl.21ofIS302-2-21:2011)(Mechanical strength)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	-	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	-	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	-	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	-	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	-	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	-	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	-	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	-	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	-	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	-	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	-	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	-	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	-	-
(Cl.24ofIS302-221:2011)(Component)	-	-	-
(Cl.24ofIS302-221:2011)(Component)	-	-	-
(Cl.24ofIS302-221:2011)(Component)	-	-	-
(Cl.24ofIS302-221:2011)(Component)	-	-	-
(Cl.24ofIS302-221:2011)(Component)	-	-	-
(Cl.24ofIS302-221:2011)(Component)	-	-	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	-	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	-	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	-	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	-	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	-	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	-	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	-	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	-	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	-	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	-	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	-	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	-	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	-	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	-	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	-	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	-	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	-	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	-	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	-	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	-	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	-	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	-	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	-	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	-	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	-	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	-	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	-	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	-	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	-	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	-	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	-	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	-	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	-	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	-	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	-	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	-	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	-	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	-	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	-	-
(Cl.28 of IS 302-2-21:2011)(Screws & Connections)	-	-	-
(Cl.29ofIS302-2-21:2011)(Clearances, Creepage Distances and Solid Insulation)	-	-	-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	-	-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	-	-
(Cl.31 of IS 302-2-21:2011)(Resistance to Rusting)	-	-	-
(Cl.15 of IS 2082:2018)(Verification of the Rated Capacity)	-	-	-
(Cl.16 of IS 2082:2018)(Standing Loss per 24 Hours)	-	-	-
(Cl.17 of IS 2082:2018)(Hot Water Output)	-	-	-
(Cl.18 of IS 2082:2018)( Reheating Time)	-	-	-
(Cl.19 of IS 2082:2018)(Mixing Factor)	-	-	-
(Cl.20 of IS 2082:2018)(Deviation of Dial Calibration)	-	-	-
(Cl.21 of IS 2082:2018)(Cyclic Temperature Variation)	-	-	-
(Cl.22 of IS 2082:2018)(Finish)	-	-	-
Cl.32 of IS 302-1:2008()	-	-	-
4(GENERAL REQUIREMENT)	-	-	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	-	-
12(THERMOSTAT SETTING)	-	-	-
Cl-10(Mounting of the water heater)	-	-	-
Cl-11(Measurements of stored water temperature)	-	-	-
Cl-12(Thermostat setting)	-	-	-
Cl-13(Measurement of energy consumption)	-	-	-
Cl-14(Verification of the rated capacity)	-	-	-
(Cl.22 of IS 302-2-21:2018)(Constructions)	-	-	-
(Cl.22 of IS 302-2-21:2018)(Constructions)	-	-	-
(Cl.22.108 of IS 302-2-21:2018)(Constructions)	-	-	-
(Cl.22.6 of IS 302-2-21:2018)(Constructions)	-	-	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	-	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	-	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	-	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	-	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	-	-
(Cl.22.101 of IS 302-2-21:2018)(Constructions)	-	-	-
(Cl.22.105 of IS 302-2-21:2018)(Constructions)	-	-	-
(Cl.22.101 of IS 302-2-21:2018)(Constructions)	-	-	-
(Cl.22.103 of IS 302-2-21:2018)(Constructions)	-	-	-
(Cl.22.104 of IS 302-2-21:2018)(Constructions)	-	-	-
(Cl.22.104 of IS 302-2-21:2018)(Constructions)	-	-	-
(Cl.22.105 of IS 302-2-21:2018)(Constructions)	-	-	-
(Cl.22.109 of IS 302-2-21:2018)(Constructions)	-	-	-
(Cl.24.101 of IS 302-2-21:2018)(Components)	-	-	-
(Cl.25 of IS 302-2-21:2018)(Supply Connection and External Flexible cords)	-	-	-

16 Apr, 2029

-
"1 19.11.4.1 (Electrostatic discharges) Electrostatic discharge Electrostatic discharge is appeared in the portal test list but the same is not specified and related to the specification IS 2082 2 19.11.4.2 (Radiated fields) Radiated Fields Radiated Fields is appeared in the portal test list but the same is not specified and related to the specification IS 2082 3 19.11.4.3 (Fast transient bursts) Fast Transient bursts Fast Transient bursts is appeared in the portal test list but the same is not specified and related to the specification IS 2082 4 19.11.4.4 (Surge Immunity Test) Surge Immunity Test Surge Immunity Test is appeared in the portal test list but the same is not specified and related to the specification IS 2082 5 19.11.4.5 (Immunity to conductivity Discharge) Immunity to conductivity Discharge Immunity to conductivity Discharge is appeared in the portal test list but the same is not specified and related to the specification IS 2082 6 19.11.4.6 (Class 3 voltage dips and interruptions) Class 3 voltage dips and interruptions Class 3 voltage dips and interruptions is appeared in the portal test list but the same is not specified and related to the specification IS 2082 7 19.11.4.7 (Hormonics) Harmonics Harmonics is appeared in the portal test list but the same is not specified and related to the specification IS 2082 "

3423

RTRC LIMITED, GURUGRAM

9177406

IS 5484 (2023)

EC GRADE ALUMINIUM ROD PRODUCED BY CONTINUOUS CASTING AND ROLLING - SPECIFICATION

Electrical conductor(EC) grade aluminum redraw rods

11500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6.1(Grades and chemical composition of EC grade aluminium rod produced)	-	5000	-
Cl-6.2(Chemical analysis of the material)	-	0	-
Cl.6.1 as per IS 4026(Silicon - IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.6.1 as per IS 4026(Iron - IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.6.1 as per IS 4026(Copper - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.6.1 as per IS 4026(Manganese - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.6.1 as per IS 4026(Magnesium - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.6.1 as per IS 4026(Chromium - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.6.1 as per IS 4026(Zinc - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.6.1 as per IS 4026(Titanium - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-
Cl-5(Manufacture)	-	0	-
Cl-7.1(General condition for delivery and inspection relating)	-	0	-
Cl-9(Ultimate tensile strength and elongation)	-	2500	-
Cl-10.1(Resistivity)	-	2500	-
Cl-10.1(electrical conductivity)	-	0	-
Cl-10.1.1(Resistivity and Conductivity Limit)	-	0	-
Cl-11(Dimensions)	-	500	-
Cl-13(Finish and freedom from defects)	-	500	-
Cl-14(Rejection and retest)	-	0	-
Cl-16(Marking)	-	0	-
CL 9(ULTIMATE TENSILE STRENGTH AND ELONGATION)	-	0	-
CL 11(DIMENSIONS)	-	0	-
CL 13(FINISH AND FREEDOM FROM DEFECTS)	-	0	-
9(Elongation)	-	0	-
12(Joint)	-	0	-
Cl-6.1(Grades and chemical composition of EC grade aluminium rod produced)	-	0	-
Cl-6.2(Chemical analysis of the material)	-	0	-
Cl.6.1 as per IS 4026(Silicon - IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.6.1 as per IS 4026(Iron - IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.6.1 as per IS 4026(Copper - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.6.1 as per IS 4026(Manganese - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.6.1 as per IS 4026(Magnesium - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.6.1 as per IS 4026(Chromium - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.6.1 as per IS 4026(Zinc - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.6.1 as per IS 4026(Titanium - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-
Cl-5(Manufacture)	-	0	-
Cl-7.1(General condition for delivery and inspection relating)	-	0	-
Cl-9(Ultimate tensile strength and elongation)	-	0	-
Cl-10.1(Resistivity)	-	0	-
Cl-10.1(electrical conductivity)	-	0	-
Cl-10.1.1(Resistivity and Conductivity Limit)	-	0	-
Cl-11(Dimensions)	-	0	-
Cl-13(Finish and freedom from defects)	-	0	-
Cl-14(Rejection and retest)	-	0	-
Cl-16(Marking)	-	0	-
CL 9(ULTIMATE TENSILE STRENGTH AND ELONGATION)	-	0	-
CL 11(DIMENSIONS)	-	0	-
CL 13(FINISH AND FREEDOM FROM DEFECTS)	-	0	-
9(Elongation)	-	0	-
12(Joint)	-	0	-
Cl-6.1(Grades and chemical composition of EC grade aluminium rod produced)	-	0	-
Cl-6.2(Chemical analysis of the material)	-	0	-
Cl.6.1 as per IS 4026(Silicon - IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.6.1 as per IS 4026(Iron - IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.6.1 as per IS 4026(Copper - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.6.1 as per IS 4026(Manganese - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.6.1 as per IS 4026(Magnesium - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.6.1 as per IS 4026(Chromium - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.6.1 as per IS 4026(Zinc - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.6.1 as per IS 4026(Titanium - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-
Cl-5(Manufacture)	-	0	-
Cl-7.1(General condition for delivery and inspection relating)	-	0	-
Cl-9(Ultimate tensile strength and elongation)	-	0	-
Cl-10.1(Resistivity)	-	0	-
Cl-10.1(electrical conductivity)	-	0	-
Cl-10.1.1(Resistivity and Conductivity Limit)	-	0	-
Cl-11(Dimensions)	-	0	-
Cl-13(Finish and freedom from defects)	-	0	-
Cl-14(Rejection and retest)	-	0	-
Cl-16(Marking)	-	0	-
CL 9(ULTIMATE TENSILE STRENGTH AND ELONGATION)	-	0	-
CL 11(DIMENSIONS)	-	0	-
CL 13(FINISH AND FREEDOM FROM DEFECTS)	-	0	-
9(Elongation)	-	0	-
12(Joint)	-	0	-

03 Apr, 2027

-
Included w.e.f 12.09.2025

3424

BIS, Central Laboratory (CL)

None

IS 10709 (1983)

Specification for brass wires for fourdrinier cloth

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

-
NA

3425

EMC Testing and Compliance LLP, Gurugram

8141526

IS 18163 (2023)

Textiles Light weight jute sacking bags for packing 35 kg groundnut with shell Specification

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Manufacture)	-	1000	-
4.1.1(Manufacture)	-	0	-
4.2(Seam)	-	1000	-
4.2(Seam)	-	0	-
4.2(Seam)	-	0	-
Cl-4.2(Seam)	-	0	-
Cl-4.3(Safety Stitch)	-	1000	-
Cl-7(Marking)	-	0	-
Cl-4.4(Hemming at the Mouth)	-	1000	-
4.4(Hemming at the Mouth)	-	0	-
Cl-4.5(Freedom from Defects)	-	1000	-
Cl-5.2, Table 2 (i)(Total number of bags per bale)	-	0	-
Cl-5.2, Table 2 (ii)(Number of bags per bundle)	-	0	-
Cl-5.2, Table 2 (iii)(Contract mass of a bale, kg)	-	0	-
Cl-5.2, Table 2 (iv)(Corrected net mass of a bale, kg)	-	0	-
Cl-5.2, Table 2 (v)(Number of joined bags per bundle of 25 bags)	-	0	-
Cl-5.3(contract moisture regain)	-	0	-
Cl-5.4.2(Additional Requirements for Labelling as Environment Friendly Products (Optional)- Specific Requirements)	-	0	-
Cl-4.1.1 & 5.1, Table 1, i (a)(Dimensions-Outside length, cm)	-	1000	-
Cl-4.1.1 & 5.1, Table 1, i (b)(Dimensions- Outside width, cm)	-	0	-
Cl-4.1.1 & 5.1, Table 1 (ii)(Ends/dm)	-	0	-
Cl-4.1.1 & 5.1, Table 1, iii(Picks/dm)	-	1000	-
Cl-4.1.1 & 5.1, Table 1, iv(Corrected mass/bag, g, percent)	-	1000	-
Cl-4.1.1 & 5.1, Table 1, v (a)(Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): - Warp way)	-	9000	-
Cl-4.1.1 & 5.1, Table 1, v (b)(Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): - Weft way)	-	9000	-
Cl-4.1.1 & 5.1, Table 1, vi(Average seam strength (5 cm × 20 cm ravelled strip), Min, N (kgf))	-	9000	-
Cl-4.1.1 & 5.1, Table 1, vii(Moisture regain, percent, Max)	-	3000	-
Cl-4.1.1 & 5.1, Table 1, viii(Oil content on dry de-oiled material, Max)	-	3000	-

19 Jul, 2027

-
Included w.e.f. 29.09.2025

3426

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 17803 (2022)

POTABLE WATER BOTTLES (COPPER, STAINLESS STEEL, ALUMINIUM) SPECIFICATION

ALL

29000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Manufacture and Workmanship)	-	500	-
5.3(Manufacture and Workmanship)	-	500	-
7.1(Materials)	-	500	-
7.1.1(copper bottle - copper)	-	500	-
7.1.1(copper bottle – lead)	-	500	-
7.1.1(copper bottle – bismuth)	-	500	-
7.1.1(copper bottle – oxygen)	-	500	-
7.1.1(copper bottle – total impurities)	-	500	-
7.1.3.3(o-ring or washer - Defects)	-	500	-
7.1.4(Auxillary closure- Bisphenol A (BPA))	-	500	-
7.1.8(Anodic coating)	-	500	-
7.1.8(Hard Anodized)	-	500	-
7.1.9(External coating– Limit of Lead)	-	500	-
7.1.9(External coating– Limit of Cadmium)	-	500	-
7.2(Capacity)	-	500	-
7.3, 7.3.1, 7.3.2(Impact resistance Test/ Drop Impact Test/ Pendulum Impact test)	-	500	-
7.4(Test for strength of shoulder strap)	-	500	-
7.5(Test for cord)	-	500	-
7.7(Leakage test)	-	500	-
7.8(Staining test)	-	500	-
7.9(Lever, device for operating or Regulating flow test)	-	500	-
7.10(Stability test)	-	500	-
7.11(Load test)	-	500	-
7.12(Food safe test/Leaching test)	-	500	-
7.12(Water potability)	-	500	-
7.13(Turbidity)	-	500	-
7.13(pH value)	-	500	-
7.13(Taste threshold)	-	500	-
7.13(Colour, Hazen units)	-	500	-
7.13(Odour)	-	500	-
7.13(Total dissolved solids)	-	500	-
9.1(Marking)	-	500	-
7.1.3(Overall Migration test (IS 9845 : 1998))	-	500	-
Cl. 7.1.5(PERFORMANCE TEST (Lever device ))	-	500	-
7.1.1.1(copper bottle – Thickness)	-	500	-
7.1.2.1(Stainless steel bottle (thickness))	-	500	-
7.1.2.1(Stainless steel bottle (material))	-	500	-
7.1.2 Note 2(Aluminium bottle (Material))	-	500	-
7.1.3.1(Stopper Material)	-	500	-
7.1.3.2(o-ring or washer Overall migration)	-	500	-
7.1.4(Auxillary closure - Material)	-	500	-
7.1.9(External coating - Thickness test)	-	500	-
7.1.9(External coating - Salt water corrosion test)	-	500	-
7.1.9(External coating - Adhesion test)	-	500	-
7.3.1.3 (Amendment 1)(Drop impact test - Free fall test)	-	500	-
7.3.1.2 (Amendment 1)(Drop impact test - Vertical hang)	-	1000	-
7.3.1.1 (Amendment 1)(Drop impact test - Horizontal Hang)	-	1000	-
Cl 7.6(Test for cord chain)	-	1000	-
7.1.2 (Note 1), Annex B (Amendment 1)- Sensorial test(Annex B (Amendment 1)- Sensorial test)	-	500	-
15. 7.1.2 (Note 1), Annex A (Amendment 1)- Leaching of food grade stainless steel(Annex A (Amendment 1)- Leaching of food grade stainless steel)	-	500	-

08 May, 2028

-
Included w.e.f.22.09.2025

3427

Testtex India Laboratories Private Limited, Noida

8138306

IS 17043 : Part 1 (2024)

Shoes - Specification Part 1 Shoes for Services

39000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.2(Design)	-	200	-
Cl-4.3.1(Size)	-	200	-
Cl-4.3.2(Weight)	-	200	-
Cl-4.4(Height of Upper)	-	200	-
Cl-4.5, S.Cl-4.5.2(Ergonomic Feature)	-	1000	-
Cl-4.5, S.Cl-4.5.3(Bond Strength)	-	0	Refer 4.5.3.1 & 4.5.3.2
Cl- 4.5.3.1(Upper-outsole bond strength)	-	700	-
Cl.4.5.3.2(Interlayer bond strength)	-	700	-
Cl-4.5, S.Cl-4.5.4(Slip Resistance)	-	2000	-
Cl-4.5.5.1(Electrical Properties-Antistatic footwear)	-	3500	-
Cl-4.5, S.Cl-4.5.6(Heat Insulation of Sole Complex)	-	1000	-
Cl-4.5, S.Cl-4.5.7(Cold Insulation of Sole Complex)	-	1000	-
Cl-4.6.1(Material)	-	200	-
Cl.4.5.8(Energy Absorption of Seat Region)	-	1000	-
Cl-4.6.2(Tear Strength)	-	500	-
Cl-4.6.3(Water Vapour Permeability and Coefficient)	-	1000	-
Cl-4.6.4(Water Penetration and Water Absorption)	-	1000	-
Cl-4.7.1(Material)	-	200	-
Cl-4.7.2(Tear Strength)	-	500	-
Cl-4.7.3(Abrasion Resistance)	-	1000	-
Cl-4.7.4(Water Vapour Permeability and Coefficient)	-	1000	-
Cl. 4.8.1(Material)	-	200	-
Cl-4.8.2(Abrasion Resistance)	-	500	-
Cl-4.8.3(Water Absorption and Desorption)	-	1000	-
Cl-4.9.2(Water Absorption and Desorption)	-	1000	-
4.9 Insocks(Insock thickness)	-	200	-
Cl-4.9.1(Material)	-	200	-
Cl-4.9.3(Abrasion Resistance)	-	1000	-
Cl-4.10(Toe Puff and Counter Stiffener)	-	200	-
Cl-4.11.1(Material)	-	200	-
Cl-4.11.2(Tear Strength)	-	500	-
Cl-4.12(Closing Thread)	-	500	-
Cl-4.13.3(Moulded Density)	-	500	-
Cl-4.13.4(Hardness)	-	500	-
Cl-4.13.5(Ageing Test)	-	700	-
Cl-4.13.6(Tear Strength)	-	500	-
Cl-4.13.7(Abrasion Resistance)	-	1000	-
Cl-4.13.8(Flexing Resistance)	-	1000	-
Cl-4.14(Eyelet)	-	1500	-
Cl-4.15.1(Material)	-	200	-
Cl-4.15.2(Breaking Load and Tag Retention)	-	1000	-
Cl-7(Marking)	-	0	-
Cl-5, Table 1 of IS 17011 (i)(Allergenic and carcinogenic disperse dyes)	-	6000	-
Cl-5, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	2000	-
Cl-5, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	2000	-
Cl-5, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	750	-
Cl-5, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	3000	-
Cl-5, Table no 1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl-5, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	1000	-
Cl-5, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	3000	-
Cl-5, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	3000	-
Cl-5, Table no 1 of IS 17011 (x)(pH)	-	500	-
Cl-5, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	4000	-
Cl-5, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	5000	-
Cl-4.13.2(Thickness)	-	200	-
Cl-4.13.1(Material)	-	200	-
Cl-5(Chemical Requirements)	-	0	Refer individual chemical tests above

-
Included w.e.f. 04.11.2025

3428

Fire Test & Research Laboratory, Sonipat

8123835

IS 8442 (2024)

Stand Post Type Water and Water-cum-Foam Monitor for Fire Fighting - Specification (Second Revision)

Stand Post Type Water and Water-cum-Foam Monitor

31600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3.1(Dimensions of inlet flanges)	-	1200	-
Cl-3.2(Monitors)	-	1200	-
Cl-3.3(shape of the monitor)	-	400	-
Cl-3.4(General)	-	400	-
Cl-6(Workmanship and Finish)	-	400	-
Cl-7(Anti Corrosive Treatment)	-	1000	-
Cl-8(PAINTING)	-	400	-
Cl-9.1(Water Monitor)	-	4500	-
Cl-9.2.1(water-cum-foam monitor with water foam nozzle)	-	14000	-
Cl-9.2.2(water-cum-foam monitor with foam barrel)	-	0	Repeat Test
Cl-10(LEAKAGE TEST)	-	3500	-
Cl-12(Marking)	-	100	-
Cl-5(Construction)	-	4500	-
Cl-3.1(Dimensions of inlet flanges)	-	0	Repeat Test
Cl-3.2(Monitors)	-	0	Repeat Test
Cl-3.3(shape of the monitor)	-	0	Repeat Test
Cl-3.4(General)	-	0	Repeat Test
Cl-6(Workmanship and Finish)	-	0	Repeat Test
Cl-7(Anti Corrosive Treatment)	-	0	Repeat Test
Cl-8(PAINTING)	-	0	Repeat Test
Cl-9.1(Water Monitor)	-	0	Repeat Test
Cl-9.2.1(water-cum-foam monitor with water foam nozzle)	-	0	Repeat Test
Cl-9.2.2(water-cum-foam monitor with foam barrel)	-	0	Repeat Test
Cl-10(LEAKAGE TEST)	-	0	Repeat Test
Cl-12(Marking)	-	0	Repeat Test
Cl-5(Construction)	-	0	Repeat Test
Cl-3.1(Dimensions of inlet flanges)	-	-	-
Cl-3.2(Monitors)	-	-	-
Cl-3.3(shape of the monitor)	-	-	-
Cl-3.4(General)	-	-	-
Cl-6(Workmanship and Finish)	-	-	-
Cl-7(Anti Corrosive Treatment)	-	-	-
Cl-8(PAINTING)	-	-	-
Cl-9.1(Water Monitor)	-	-	-
Cl-9.2.1(water-cum-foam monitor with water foam nozzle)	-	-	-
Cl-9.2.2(water-cum-foam monitor with foam barrel)	-	-	-
Cl-10(LEAKAGE TEST)	-	-	-
Cl-12(Marking)	-	-	-
Cl-5(Construction)	-	-	-

31 Dec, 2026

-
Included w.e.f. 29.10.2025 Excluding Cl.4 (Material)

3429

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 9550 (2024)

Bright Steel Bars â Specification (Second Revision)

14900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(Supply of material and product designation)	-	500	-
Cl-6(Chemical Composition)	-	3500	-
Cl-7(mechanical properties)	-	6500	-
Cl-8.1(Dimensions)	-	1500	-
Cl-8.2.1, Table-1(Cold drawn or heattreated and cold drawn)	-	500	-
Cl-8.2.1, Table-1(Cold drawn, heat treated)	-	0	-
Cl-8.2.1, Table-1(Peeled/turned)	-	0	-
Cl-8.2.1, Table-1(Polished)	-	0	-
Cl-8.2.1.1(Tolerances on dimensions)	-	0	-
Cl-8.2.2, Table-2 (i)(Manufacturing lengtha)	-	500	-
Cl-8.2.2, Table-2 (ii)(Stock lengtha)	-	500	-
Cl-8.2.2, Table-2 (iii)(Cut to length)	-	500	-
Cl-9(Surface condiotn)	-	2000	-
Cl-14(Marking)	-	500	-
Clause. 6.0(chemical composition)	-	0	-
Clause. 6.0(Sillicon)	-	0	-
Clause. 6.0(Carbon)	-	0	-
Clause. 6.0(Copper)	-	0	-
Clause. 6.0(Manganese)	-	0	-
Clause. 6.0(Molybdenum)	-	0	-
Clause. 6.0(Chromium)	-	0	-
Clause. 6.0(Nickel)	-	0	-
Clause. 6.0(Sulphur)	-	0	-
Clause. 6.0(Phosphorus)	-	0	-
Clause. 6.0(Vanadium)	-	0	-
Clause. 6.0(Titanium)	-	0	-
Clause. 6.0(Boron)	-	0	-
Clause. 6.0(Aluminium)	-	0	-
Clause. 7.0(Brinell Hardness)	-	1000	-
Clause. 7.0(Tensile test)	-	0	-
Clause. 7.0(Yeild stress)	-	0	-
Clause. 7.0(Elongation)	-	0	-
Clause. 8.0(Dimension)	-	0	-
Clause. 8.0(Tolerence)	-	0	-
clause. 9.0(Surface condition)	-	0	-
clause. 9.0(Decarburization)	-	1000	-
clause.-10.0(Sampling)	-	0	-
clause.- 11.0(other tests)	-	1500	-
Clause. -12.0(Retest)	-	0	-
Clasue.- 13.0(Surface Protection)	-	1500	-
Clasue.- 14.0(Marking)	-	0	-

08 Feb, 2027

-
Included w.e.f.12.09.2025

3430

RTRC LIMITED, GURUGRAM

9177406

IS 398 : Part 2 (2025)

Aluminium Conductor for Overhead Transmission Purposes - Specification Part 2 Aluminium Conductors Galvanized Steel Reinforced (Fourth Revision)

Aluminium Conductor for Overhead Transmission Purposes — Specification Part 2 Aluminium Conductors Galvanized Steel Reinforced

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6(Material)	-	1000	Type Test-Rs 18000 up to 100 sq mm. Rs 100000 (150 Sq mm to 200 sq mm). Rs 150000 (400 sq mm to 560 sq mm).
Cl-6.1.1(chemical composition of high carbon steel)	-	0	-
Cl-6.2(zinc used for galvanizing)	-	0	-
Cl-7(Freedom From Defects)	-	1000	Type Test-Rs 18000 up to 100 sq mm. Rs 100000 (150 Sq mm to 200 sq mm). Rs 150000 (400 sq mm to 560 sq mm).
Cl-8.1(Wires-Nominal Sizes)	-	1000	Type Test-Rs 18000 up to 100 sq mm. Rs 100000 (150 Sq mm to 200 sq mm). Rs 150000 (400 sq mm to 560 sq mm).
Cl-8.2(Aluminum Conductors, Galvanized Steel- Reinforced)	-	1000	-
Cl-9.1(Joint in Wires)	-	0	-
Cl-9.2(Aluminium Wires)	-	0	-
Cl-9.3(Galvanized Steel Wires)	-	0	-
Cl-10.2(Lay Ratio of Aluminium Conductors Galvanized Steel-Reinforced)	-	5000	-
Cl-13.3(Conductor- Visual examination)	-	1000	-
Cl- 13.5(Conductor- Measurement of lay ratio/direction of lay)	-	5000	-
Cl- 13.12(Conductor- d.c. Resistance test on stranded conductor)	-	5000	-
Cl-13.4(Aluminium wires-Measurement of diameter)	-	2000	-
Cl- 13.6(Aluminium wires -Breaking load test)	-	5000	-
Cl- 13.8(Aluminium wires- Wrapping test)	-	2500	-
Cl- 13.9(Aluminium wires- d.c. resistance test)	-	5000	-
Cl- 13.11(Aluminium wires Procedure qualification test on welded joint of aluminium strands)	-	0	-
Cl- 13.4(Steel wires- Measurement of diameter)	-	2000	-
Cl- 13.6(Steel wires- Breaking load test)	-	2000	-
Cl- 13.7(Steel wires- Ductility test)	-	2000	-
Cl- 13.8(Steel wires- Wrapping test)	-	2000	-
Cl- 13.10(Steel wires- Galvanizing test)	-	2500	-
Cl-13.7.1(Torsion Test)	-	2500	-
Cl-13.7.2(Elongation Test)	-	2500	-
Cl-11.1(Standard Length)	-	1000	-
Cl-11.2(Random Lengths)	-	0	-

03 Apr, 2027

-
Included w.e.f 11.09.2025 Exclusion: Cl- 13.13 (Conductor- Surface condition test on stranded conductor),Cl- 13.14 (Conductor- Ultimate tensile strength test on stranded conductor),Cl- 13.15 (Conductor- Corona test) and Cl-13.16 (Conductor- Radio interference voltage test)

3431

EMC Testing and Compliance LLP, Gurugram

8141526

IS 18162 (2023)

Textiles Light weight jute sacking bags for packing 50 kg pulses and soyabean Specification

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Manufacture)	-	1000	-
4.1.1(Manufacture)	-	0	-
4.2(Seam)	-	1000	-
4.2(Seam)	-	0	-
4.2(Seam)	-	0	-
4.2(Seam)	-	0	-
4.3(Safety Stitch)	-	1000	-
4.3(Safety Stitch)	-	0	-
4.4(Hemming at the Mouth)	-	1000	-
4.4(Hemming at the Mouth)	-	0	-
Cl-4.5(Freedom from Defects)	-	1000	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	0	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	0	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	0	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	0	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	0	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	0	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	0	-
Cl-4.1.1 & 5.1, Table 1, i (a)(Dimensions-Outside length, cm)	-	2500	-
Cl-4.1.1 & 5.1, Table 1, i (b)(Dimensions- Outside width, cm)	-	0	Repeated
Cl-4.1.1 & 5.1, Table 1 (ii)(Ends/dm)	-	0	Repeated
Cl-4.1.1 & 5.1, Table 1, iii(Picks/dm)	-	2500	-
Cl-4.1.1 & 5.1, Table 1, iv(Corrected mass/bag, g, percent)	-	2500	-
Cl-4.1.1 & 5.1, Table 1, v (a)(Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): - Warp way)	-	2500	-
Cl-4.1.1 & 5.1, Table 1, v (b)(Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): - Weft way)	-	0	Repeated
Cl-4.1.1 & 5.1, Table 1, vi(Average seam strength (5 cm × 20 cm ravelled strip), Min, N (kgf))	-	2500	-
Cl-4.1.1 & 5.1, Table 1, vii(Moisture regain, percent, Max)	-	3000	-
Cl-4.1.1 & 5.1, Table 1, viii(Oil content on dry de-oiled material, Max)	-	3000	-
5.1, Table 1, v(Warpway -IS 9113 (Cl.8.6.2))	-	3000	-
5.1, Table 1, v(Average breaking load of sacking (ravelled strip method, 10.0 cm × 20.0 cm), Min, N (kgf) Warpway:)	-	3000	-
5.1, Table 1, v(Average breaking load of sacking (ravelled strip method, 10.0 cm × 20.0 cm), Min, N (kgf) Weftway:)	-	3000	-

19 Jul, 2027

-
Included w.e.f. 29.09.2025

3432

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 733 (1983)

Specification for wrought aluminium and aluminium alloy bars, rods and sections (For General Engineering Purposes) (Third Revision)

12800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4(Freedom from Defects)	-	1000	-
Cl. 5.1, Table 2(0.2 Percent proof stress- IS 1816)	-	3500	-
Cl. 5.1, Table 2(Tensile Strength- IS 1816)	-	3500	-
Cl. 5.1, Table 2(Elongation on 50 mm or 5.65√So Gauge Length)	-	3500	-
Cl. 0.4, 5.1, Table 1(Aluminium- IS 504 or by any other suitable instrumental method)	-	6500	Rs. 6500 for entire Table- 1 (Chemical Properties)
Cl. 0.4, 5.1, Table 1(Copper- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Magnesium- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Silicon- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Iron- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Zinc- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Aluminium- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Titanium and / or other grain refining elements - IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Chromium- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Ti+ V- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Total Impurities- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Cr+ Mn- IS 504 or by any other suitable instrumental method)	-	0	-
7(Dimension - IS 3965)	-	1500	-
11(Marking)	-	500	-
Table-1, Clause - 5.1(Copper)	-	0	-
Table-1, Clause - 5.1(Iron)	-	0	-
Table-1, Clause - 5.1(Magnesium)	-	0	-
Table-1, Clause - 5.1(Manganese)	-	0	-
Table-1, Clause - 5.1(Titanium)	-	0	-
Table-1, Clause - 5.1(Silicon)	-	0	-
Table-1, Clause - 5.1(Chromium)	-	0	-
Table-1, Clause - 5.1(Zinc)	-	0	-

08 Feb, 2027

-
Included w.e.f.29.09.2025

3433

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 18297 (2023)

Cabinet Hinges

24900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Type & Size)	-	500	-
4.1(Type (a) Full Overlay (Fig-1))	-	0	-
4.2((b) Half Overlay (Fig-2))	-	0	-
4.1((b) Half Overlay (Fig-2))	-	0	-
4.1(c) Inset (Fig-2))	-	0	-
4.2(Size (Fig-2))	-	0	-
4.3(Manufacture & Purchaser)	-	500	-
5(Material (IS 18297))	-	1500	-
7.1(General Test Requirement (IS: 18297))	-	0	-
7.1.1(Preparatory Measures (IS:18297))	-	0	-
7.1.2(Limiting Deviations (IS:18297))	-	0	-
7.1.3(Application of Force (IS: 18297))	-	0	-
7.1.4(Sequence of Testing (IS 18297))	-	0	-
7.1.5.1(Mass (IS:18297))	-	1000	-
7.1.5.2((i) Face withdrawal of Screws (IS: 2380 P-14))	-	1000	-
7.1.5.2((ii) Density (IS 2380 P-3))	-	500	-
7.2(Over Load Test (IS 18297))	-	1500	-
7.2.1(Overload Test - Vertical Static overload test)	-	1500	-
7.2.2(Overload Test - Horizontal Static overload test)	-	1500	-
Cabinet Hinges(Functional Test (IS: 18297))	-	2000	-
Cabinet Hinges(Functional Test (IS: 18297))	-	0	-
7.3.2(First Vertical Static Load test (IS 18297))	-	2000	-
7.3.3(First Horizontal Static Load test (IS 18297))	-	1500	-
7.3.4(Slam shut test (IS 18297))	-	2000	-
7.3.6(Durability Test (IS 18297))	-	2500	-
7.3.7(Deflection Test (IS 18297))	-	2000	-
7.3.8(Second Vertical Static Test (IS 18297))	-	1500	-
7.3.9(Second Horizontal Static Test (IS: 18297))	-	1500	-
7.4(Crrosion Resistance (IS 18297))	-	2500	-
7.5(Finish (IS: 18297))	-	500	-
7.3.1(Operating Forces)	-	0	-
7.1.5.3(Standard door dimensions and masses)	-	500	-
7.3.5(Determination of Reference Point for the Door Sagging)	-	1500	-
6 Table 1(Manufacture(IS: 18297))	-	0	-

08 Feb, 2027

-
Included w.e.f.22.09.2025

3434

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 2501 (1995)

Solid drawn copper tubesfor general engineering purposes - Specification (Third Revision)

14900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No.5(Grades)	-	0	-
Cl. No.6(CONDITION)	-	0	-
Cl. No. 7(FREEDOM FROM DEFECTS)	-	500	-
Cl. No. 8.1(Dimensions)	-	1500	-
Cl. No. 8.2(Tolerances)	-	0	-
Cl. No. 9(CHEMICAL COMPOSITION)	-	3000	-
Cl. No. 10.1.1, Table no. 1(Tensile Test)	-	2500	-
Cl. No. 10.2(Flattening and Doubling-Over Test)	-	1500	-
Cl. No. 10.3(Drift Expanding Test)	-	2000	-
Cl. No. 10.4(Non-Destructive Testing)	-	3500	-
Cl. No. 10.5("Microscopic Examination ( for 0 Condition Only )")	-	2000	-
Cl. No. 13(Marking)	-	0	-
10.6(Hydrogen Embrittlement Test)	-	4000	-

08 Feb, 2027

-
Included w.e.f.22.09.2025

3435

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 613 (2000)

Copper rods and bars for electrical purposes - Specification (Third Revision)

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause no.3(SUPPLY OF MATERIAL)	-	500	-
Clause no.6(FREEDOM FROM DEFECTS)	-	500	-
Clause no.7(CONDITION OF SUPPLY)	-	500	-
Clause no.8(CHEMICAL COMPOSITION)	-	3000	-
Clause no.9.1, table no,1(" tensile test ")	-	2000	-
Clause no.9.2(Bend test)	-	2000	-
"Clause no.10.1 and 11.1.1 Table No. 2"(Dimensions and Tolerances)	-	1000	-
"Clause no.10.2 and Table No. 3"("Tolerances on Length of Bar Rod in Straight Length ")	-	500	-
"Clause no.10.4 and Table No. 4"(Corner Radius and Tolerances)	-	500	-
"Clause no.11 and Table No. 5"(Electrical Resistivity)	-	2500	-
Clause no. 13(packing)	-	0	-
Clause no. 14(Marking)	-	0	-
Clause no.3(SUPPLY OF MATERIAL)	-	0	-
Clause no.6(FREEDOM FROM DEFECTS)	-	0	-
Clause no.7(CONDITION OF SUPPLY)	-	0	-
Clause no.8(CHEMICAL COMPOSITION)	-	0	-
Clause no.9.1, table no,1(" tensile test ")	-	0	-
Clause no.9.2(Bend test)	-	0	-
"Clause no.10.1 and 11.1.1 Table No. 2"(Dimensions and Tolerances)	-	0	-
"Clause no.10.2 and Table No. 3"("Tolerances on Length of Bar Rod in Straight Length ")	-	0	-
"Clause no.10.4 and Table No. 4"(Corner Radius and Tolerances)	-	0	-
"Clause no.11 and Table No. 5"(Electrical Resistivity)	-	0	-
Clause no. 13(packing)	-	0	-
Clause no. 14(Marking)	-	0	-
Clause no.3(SUPPLY OF MATERIAL)	-	0	-
Clause no.6(FREEDOM FROM DEFECTS)	-	0	-
Clause no.7(CONDITION OF SUPPLY)	-	0	-
Clause no.8(CHEMICAL COMPOSITION)	-	0	-
Clause no.9.1, table no,1(" tensile test ")	-	0	-
Clause no.9.2(Bend test)	-	0	-
"Clause no.10.1 and 11.1.1 Table No. 2"(Dimensions and Tolerances)	-	0	-
"Clause no.10.2 and Table No. 3"("Tolerances on Length of Bar Rod in Straight Length ")	-	0	-
"Clause no.10.4 and Table No. 4"(Corner Radius and Tolerances)	-	0	-
"Clause no.11 and Table No. 5"(Electrical Resistivity)	-	0	-
Clause no. 13(packing)	-	0	-
Clause no. 14(Marking)	-	0	-

08 Feb, 2027

-
included w.e.f 05-01-2026.

3436

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 814 (2004)

Covered electrodes for manual metal arc welding of carbon and carbon manganese steel - Specification (Sixth Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 & 8.2(Carbon- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	1500	-
6 & 8.2(Silicon- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	1500	-
6 & 8.2(Phosphorous- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	1500	-
6 & 8.2(Sulphur- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	1500	-
6 & 8.2(Copper- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	1500	-
6 & 8.2(Vanadium- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	1500	-
6 & 8.2(Titanium- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	1500	-
6 & 8.2(Alumiminium- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	1500	-
6 & 8.2(Cr+Ni+Mo - Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	1500	-
6 & 8.2(Chromium- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	1500	-
6 & 8.2(Nickel- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	1500	-
6 & 8.2(Molybdenum- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	1500	-
6 & 8.2(Mn+Ni+Cr+Mo+V - Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	1500	-
7.1.1(Diameter of Core Wire)	-	500	-
7.1.2(Length of Electrodes)	-	500	-
7.2.1(Contact End)	-	500	-
7.2.2(Arc striking End)	-	500	-
7.3(Concentricity of Flux covering with core wire)	-	500	-
7.4(Defects of Core wire and Coverings)	-	500	-
9.1.2 Table 6 (Ultimate Tensile Strength-Annex F)	-	2500	-
9.1.2 Table 6 ( Yield Stress -Annex F)	-	2000	-
9.1.2 Table 6 (Percentage Elongation on Gauge Length-Annex F)	-	2000	-
9.1.3 Table 6 ( Impact Strength-Annex F)	-	2500	-
9.2(Butt Weld Bend Test-IS 1599)	-	2000	-
9.3(Running PerformanceTest-Annex H)	-	1500	-
9.4(Increased Metal Recovery Test-IS 13043)	-	3000	-
9.5(Diffusible Hydrogen Evaluation Test-IS 11802)	-	4500	-
9.6(Radiographic Test- IS 1182)	-	4000	-
CL 7.1.1(Average length of electrodes (10))	-	0	-
CL 7.2.1(Average length of Contact End (10))	-	0	-
CL 7.2.2(Average length of arc striking end (10))	-	0	-
6 & 8.2(Manganese- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	1500	-

08 Feb, 2027

-
included w.e.f 09-12-2025.

3437

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 17875 (2022)

Stainless Steel seamless pipes and tubes for general service

24900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.0 (Table No.- 1)(Chemical Composition,% - IS 228)	-	1500	-
10.1 (Table No.- 4)(Tensile Test,Mpa - IS 1608)	-	2000	-
11(Transverse Tension Test,%)	-	2000	-
12 (Table No.- 5)(Hardness Test,HRC,HRB&BHN- IS 1500 (Part 1) or IS 1586 (Part 1))	-	1500	-
13 (Table No.- 7)(Flaring Test)	-	1500	-
14(Flattaning Test-IS 2328)	-	1500	-
15.1 (Table No.- 8)(Grain Size,No.-IS 4748)	-	2500	-
17(Leak Tighteness Test)	-	3000	-
18("Corrosion Test-IS 10461 (Part 1) or IS 10461 (Part 2)")	-	3500	-
19(Eddy current test & Air under water)	-	2500	-
21(Workmanship, Finish and Appearance)	-	500	-
22(Repair by Welding or Grinding)	-	0	-
23 (Table No.- 9,10&11)(Dimensions and Tolerances,mm)	-	1000	-
"Clause 8.1 and 8.2 - Table 1"(Carbon)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Silicon)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Mangnese)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Nickel)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Chromium)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Molybdenum)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Sulphur)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Phosphorous)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Nitrogen)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Copper)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Aluminium)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Titanium)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Niobium)	-	500	-
"Clause 18 IS 10461(Part 1)"(Corrosion Test)	-	0	-
Clause 10.1 - Table 4(Tensile Strength)	-	0	-
Clause 10.1 - Table 4(Percent Elongation)	-	1500	-
Clause 11(Transverse Tension Test)	-	0	-
Clause 12(Hardness Test)	-	0	-
Clause 13(Flaring Test)	-	0	-
Clause 14(Flattening Test)	-	1500	-
Clause 15(Grain Size)	-	0	-
Clause 17(Leak Tightness Test)	-	0	-
"Clause 18 IS 10461(Part 2)"(Corrosion Test)	-	0	-
Clause 21(Workmanship, Finish & Appearance)	-	0	-
Clause 23 Annexure A, Table 9 Table 10(Dimensions & Tolerances)	-	0	-
10.2(Hardness test IS 1500 (part-1):2019)	-	0	-
12.2(Flaring test IS 17878:2022)	-	0	-
16(Sampling)	-	0	-
24(Marking)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(W)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Ta)	-	500	-
"Clause 8.1 and 8.2 - Table 2"(V)	-	500	-

08 Feb, 2027

-
included w.e.f 09-12-2025.

3438

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 17954 (2023)

TELESCOPIC BALL BEARING DRAWER SLIDE SPECIFICATION

24900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.2, Table- 2 (i)(Internal channel)	-	500	-
Cl-4.2, Table- 2 (ii)(Outer channel)	-	500	-
Cl-4.2, Table- 2 (iii)(Track up to 550 mm)	-	500	-
Cl-4.2, Table- 2 (iv)(Track from 600 mm onwards)	-	500	-
Cl-4.2, Table- 2 (v)(Ball cage)	-	500	-
Cl-4.2, Table- 2 (vi)(Ball spacer)	-	500	-
Cl-5(Components and Manufacture)	-	0	-
Cl-5(Components and Manufacture)	-	0	-
Cl-6.1(Preparatory Measures)	-	0	-
Cl-6.2 (a)(Limiting Deviations- Force)	-	0	-
Cl-6.2 (b)(Limiting Deviations- Speed)	-	0	-
Cl-6.2 (c)(Limiting Deviations- Weights)	-	0	-
Cl-6.2 (d)(Limiting Deviations- Dimension)	-	0	-
Cl-6.3(Application of Forces)	-	0	-
Cl-6.4(Testing Equipment)	-	0	-
Cl-6.5(Sequence of testing)	-	0	-
Cl-7(Vertical Load Test)	-	4000	-
Cl-8(Horizontal Load Test)	-	4000	-
Cl-9(Durability Test)	-	5500	-
Cl-10(Deflection Test)	-	3500	-
Cl-11(Slam Test)	-	3500	-
Cl-12(Finish)	-	2500	-
Cl-5.11(Ball)	-	1000	-
Cl-5.10(Rivets)	-	1000	-
4.1(size of the telescopic ball bearing slide)	-	500	-
6.6 (amendment 1)(difference of the maximum forces for opening and closing)	-	500	-

08 Feb, 2027

-
Included w.e.f. 12.11.2025

3439

RTRC LIMITED, GURUGRAM

9177406

IS 5950 (2024)

Shot Firing Cables (for Use Other than in Shafts) - Specification (Second Revision)

Shot Firing Cables (for Use Other Than in Shafts) — Specification

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Section-2, Cl-3(CONDUCTOR)	-	150	-
Section-2, Cl-4(INSULATION)	-	150	-
Section-2, Cl-5(SHEATH)	-	150	-
Section-3, Cl-6(CONDUCTOR)	-	300	-
Section-3, Cl-7.1.1(Thickness of Insulation & Sheath)	-	300	-
Section-3, Cl-7.1.2(Type II)	-	250	-
Section-3, Cl-7.2(Tolerance on Thickness of Insulation)	-	100	-
Section-3, Cl-7.3(Colour of Insulation)	-	100	-
Section-3, Cl-8.1(Single-Core)	-	500	-
Section-3, Cl-8.2(Tolerance on Thickness of Sheath)	-	500	-
Section-3, Cl-8.3(Color of Sheath)	-	500	-
Cl-10.2(Voltage Test)	-	1000	-
Cl-10.3(Spark Test)	-	500	-
Cl-10.4(Flammability Test)	-	500	-
Cl-9.1 (a)(Annealing test;)	-	500	-
Cl-9.1 (b)(Conductor resistance test)	-	1000	-
Cl-9.1 (c)(Test for thickness of insulation and sheath)	-	500	-
Cl-9.1 (d) 1(Tensile strength and elongation at break)	-	500	-
Cl-9.1 (d) 2(Ageing in air oven)	-	500	-
Cl-9.1 (d) 3(Loss of mass test)	-	200	-
Cl-9.1 (d) 4(Hot deformation)	-	300	-
Cl-9.1 (d) 5(Heat shock)	-	500	-
Cl-9.1 (d) 6(hrinkage)	-	500	-
Cl-9.2 , e(Insulation resistance test)	-	500	-

03 Apr, 2027

-
Included w.e.f 29.09.2025

3440

RTRC LIMITED, GURUGRAM

9177406

IS 17046 (2018)

Fibre Optic Cable for Cable TV Application

130000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Design and construction of aerial metal free optical fibre cable)	-	0	-
3.2(Fibre used in the cable)	-	0	-
3.3(Self-supporting metal free aerial optical fibre cable)	-	0	-
3.4(Technical Requirements)	-	4500	-
3.5(Mechanical Characteristics)	-	4500	-
3.6(Environmental Characteristic of Fibre)	-	4500	-
3.7(Optical Fibre Cable Construction Specifications)	-	1000	-
3.8(Mechanical Characteristics and Tests on Optical Fibre Cable)	-	100000	-
4(Marking)	-	500	-

03 Apr, 2027

-
Included w.e.f 29.09.2025

3441

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 14756 (2024)

Stainless Steel Utensils - Specification (THIRD REVISION)

24900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 3.1(Material used for manufacturing utensils)	-	0	-
Cl 3.2(Material used for composite bottom)	-	0	-
Cl 3.3(Material used for body of utensil of 3-ply construction)	-	0	-
Cl 3.4(Material used for stainless steel lid)	-	0	-
Cl 3.5(Material used for tempered glass lid)	-	0	-
Cl 3.5(Material used for stainless steel rim)	-	0	-
Cl 4.2 & Table 1(Minimum Sheet Thickness for Body of Utensil)	-	1500	-
Cl 4.2 & Table 2(Minimum Sheet Thickness for Lid of Utensil)	-	1500	-
Cl 4.2(Thickness of the finished utensil)	-	1500	-
Cl 4.3(Classification)	-	500	-
Cl 4.4 (i)(Thickness of Aluminium disc/core)	-	1500	-
Cl 4.4 (ii)(Thickness of Protector/cowl)	-	1500	-
Cl 4.5(Minimum sheet thickness (3-ply utensil))	-	1500	-
Cl 4.5(Thickness of finished utensil (3-ply utensil))	-	1500	-
Cl 5.1(Manufacturing defect & visual appearance)	-	1000	-
CL 5.2(Accessibility for cleaning)	-	1000	-
Cl 5.3(Joining of handles to the utensils)	-	2500	-
Cl 5.4(Requirement for handles)	-	12000	-
Cl 5.5(Welding (Finish))	-	1000	-
Cl 5.6(Finish of 3-ply utensil)	-	1000	-
Cl 5.7(Requirement for coating)	-	1000	-
Cl 5.8(Coating thickness test)	-	1500	-
Cl 5.8(Coating adhesion test)	-	1500	-
Cl 5.8.1(Thermal shock test (Coating))	-	4000	-
Cl 6.1(Staining Test (Type Test - Frequency Once in a Year))	-	1500	-
Cl 6.2(Mechanical Shock Test (for Cladded Utensils Only))	-	1500	-
Cl 6.3(Thermal Shock Test (for Cladded Utensils Only))	-	2000	-
Cl 6.4(Dry Heat Test (for Cladded Utensils Only))	-	4000	-
Cl 6.5(Coating Thickness Test (for Copper Deposit))	-	3000	-
Cl 6.6(Thermal shock test (3-ply construction utensil body))	-	5000	-
Cl 6.7(Nominal Capacity Test)	-	1000	-
Cl 8(Marking)	-	0	-
3.1(a) Carbon)	-	0	-
3.1(b) Silicon)	-	0	-
3.1(c)Manganese)	-	0	-
3.1(d) Nickel)	-	0	-
3.1(Chromium)	-	0	-
3.1(Sulphu)	-	0	-
3.1(Phosphorus)	-	0	-
Stainless Steel Utensils - Specification (THIRD REVISION)(Copper)	-	0	-
3.1(Nitrogen)	-	500	-
3.2 a(a) Carbon)	-	500	-
3.2 a(b) Silicon)	-	500	-
68995(Manganese)	-	500	-
3.2 a(d) Nickel)	-	500	-
3.2 a(Chromium)	-	500	-
3.2 a(Sulphur)	-	500	-
3.2 a(g) Phosphorus)	-	500	-
3.2 a(h) Copper)	-	500	-
3.2 a(Nitrogen)	-	500	-
3.2 b(a) Aluminium)	-	500	-
3.2 b(b) Copper)	-	500	-
3.2 b(c) Magnesium)	-	500	-
3.2 b(d) Silicon)	-	500	-
3.2 b(e) Iron)	-	500	-
3.2 b(f) Manganese)	-	0	-
3.2 b(d) Silicon)	-	0	-
3.2 b(e) Iron)	-	0	-
3.2 b(f) Manganese)	-	0	-
3.2 b(g) Zinc)	-	0	-
3.2 b(h) Titanium)	-	0	-
3.2 b(i) Chromium)	-	0	-
3.2 b(j) Cu+Si+Fe+Mn+Zn+mg)	-	0	-
3.2 b(k) Lead)	-	0	-
3.2 c(a) Carbon)	-	0	-
3.2 c(b) Silicon)	-	0	-
3.2 c(c) Manganese)	-	0	-
3.2 c(d) Nickel)	-	0	-
3.2 c(e) Chromium)	-	0	-
3.2 c(f) Sulphur)	-	0	-
3.2 c(g) Phosphorus)	-	0	-
3.3(a) Inner layer)	-	0	-
3.3(b) Middlelayer)	-	0	-
3.3(c) Outerlayer)	-	0	-
3.4(a) Carbon)	-	0	-
3.4(b) Silicon)	-	0	-
3.4(c) Manganese)	-	0	-
3.4(d) Nickel)	-	0	-
3.4(e) Chromium)	-	0	-
3.4(f) Sulphur)	-	0	-
3.4(g) Phosphorus)	-	0	-
3.4(h) Copper)	-	0	-
3.4(i) Nitrogen)	-	0	-
3.4(Thickness stainless steel lid)	-	0	-
3.5(If the utensils provided with tempered glass lid)	-	0	-
4.1(Shapes and Dimensions)	-	0	-
4.2(Thickness of the sheet)	-	0	-
4.3(Classifications)	-	0	-
4.3(Core Thickness for 3-ply Construction (asper IS15960))	-	0	-
4.3(Thickness of protective layer (as per IS 15960))	-	0	-
4.4(Thickness of 3ply full body utensil)	-	0	-
5(Workmanship and finish)	-	0	-
5.4(Handles)	-	0	-
4.1 of IS 13395(Construction)	-	0	-
4.2 of IS 13395(Materials)	-	0	-
4.3 of IS 13395(Selection and Size)	-	0	-
4.4 of Is 13395(Position of Handle and Knob with Respect to Cookware)	-	0	-
4.5 of IS 13395(Attachment to Cookware)	-	0	-
5.2 of IS 13395(Bending Strength)	-	0	-
5.3 of IS 13395(Torque Strength)	-	0	-
5.4 of IS 13395(Impact Strength)	-	0	-
5.5 of IS 13395(Fatigue Resistance 15 000 cycles withstand)	-	0	-
5.6 of IS 13395(Leakage)	-	0	-
5.7 of IS 13395(Thermal Insulation)	-	0	-
5.8 of IS 13395(Heat Resistance)	-	0	-
5.9 of IS 13395(Washing Resistance)	-	0	-
5.10 of IS 13395(Burning Resistance)	-	0	-
5.5(Material comes in contact with food)	-	0	-
6.1(Staining Test)	-	0	-
6.2(Mechanical Shock Test)	-	0	-
6.3(Thermal Shock Test)	-	0	-
6.4(Dry Heat Test)	-	0	-
6.6(Heat test)	-	0	-
6.7.1(Nominal Capacity Test)	-	0	-
6.7.2(Internal diameter of utensil)	-	0	-
Annex C(Test for leaching)	-	0	-
Annex C(Sensorial test)	-	0	-
Cl 3.1(Material used for manufacturing utensils)	-	0	-
Cl 3.2(Material used for composite bottom)	-	0	-
Cl 3.3(Material used for body of utensil of 3-ply construction)	-	0	-
Cl 3.4(Material used for stainless steel lid)	-	0	-
Cl 3.5(Material used for tempered glass lid)	-	0	-
Cl 3.5(Material used for stainless steel rim)	-	0	-
Cl 4.2 & Table 1(Minimum Sheet Thickness for Body of Utensil)	-	0	-
Cl 4.2 & Table 2(Minimum Sheet Thickness for Lid of Utensil)	-	0	-
Cl 4.2(Thickness of the finished utensil)	-	0	-
Cl 4.3(Classification)	-	0	-
Cl 4.4 (i)(Thickness of Aluminium disc/core)	-	0	-
Cl 4.4 (ii)(Thickness of Protector/cowl)	-	0	-
Cl 4.5(Minimum sheet thickness (3-ply utensil))	-	0	-
Cl 4.5(Thickness of finished utensil (3-ply utensil))	-	0	-
Cl 5.1(Manufacturing defect & visual appearance)	-	0	-
CL 5.2(Accessibility for cleaning)	-	0	-
Cl 5.3(Joining of handles to the utensils)	-	0	-
Cl 5.4(Requirement for handles)	-	0	-
Cl 5.5(Welding (Finish))	-	0	-
Cl 5.6(Finish of 3-ply utensil)	-	0	-
Cl 5.7(Requirement for coating)	-	0	-
Cl 5.8(Coating thickness test)	-	0	-
Cl 5.8(Coating adhesion test)	-	0	-
Cl 5.8.1(Thermal shock test (Coating))	-	0	-
Cl 6.1(Staining Test (Type Test - Frequency Once in a Year))	-	0	-
Cl 6.2(Mechanical Shock Test (for Cladded Utensils Only))	-	0	-
Cl 6.3(Thermal Shock Test (for Cladded Utensils Only))	-	0	-
Cl 6.4(Dry Heat Test (for Cladded Utensils Only))	-	0	-
Cl 6.5(Coating Thickness Test (for Copper Deposit))	-	0	-
Cl 6.6(Thermal shock test (3-ply construction utensil body))	-	0	-
Cl 6.7(Nominal Capacity Test)	-	0	-
Cl 8(Marking)	-	0	-
3.1(a) Carbon)	-	0	-
3.1(b) Silicon)	-	0	-
3.1(c)Manganese)	-	0	-
3.1(d) Nickel)	-	0	-
3.1(Chromium)	-	0	-
3.1(Sulphu)	-	0	-
3.1(Phosphorus)	-	0	-
Stainless Steel Utensils - Specification (THIRD REVISION)(Copper)	-	0	-
3.1(Nitrogen)	-	0	-
3.2 a(a) Carbon)	-	0	-
3.2 a(b) Silicon)	-	0	-
68995(Manganese)	-	0	-
3.2 a(d) Nickel)	-	0	-
3.2 a(Chromium)	-	0	-
3.2 a(Sulphur)	-	0	-
3.2 a(g) Phosphorus)	-	0	-
3.2 a(h) Copper)	-	0	-
3.2 a(Nitrogen)	-	0	-
3.2 b(a) Aluminium)	-	0	-
3.2 b(b) Copper)	-	0	-
3.2 b(c) Magnesium)	-	0	-
3.2 b(d) Silicon)	-	0	-
3.2 b(e) Iron)	-	0	-
3.2 b(f) Manganese)	-	0	-
3.2 b(d) Silicon)	-	0	-
3.2 b(e) Iron)	-	0	-
3.2 b(f) Manganese)	-	0	-
3.2 b(g) Zinc)	-	0	-
3.2 b(h) Titanium)	-	0	-
3.2 b(i) Chromium)	-	0	-
3.2 b(j) Cu+Si+Fe+Mn+Zn+mg)	-	0	-
3.2 b(k) Lead)	-	0	-
3.2 c(a) Carbon)	-	0	-
3.2 c(b) Silicon)	-	0	-
3.2 c(c) Manganese)	-	0	-
3.2 c(d) Nickel)	-	0	-
3.2 c(e) Chromium)	-	0	-
3.2 c(f) Sulphur)	-	0	-
3.2 c(g) Phosphorus)	-	0	-
3.3(a) Inner layer)	-	0	-
3.3(b) Middlelayer)	-	0	-
3.3(c) Outerlayer)	-	0	-
3.4(a) Carbon)	-	0	-
3.4(b) Silicon)	-	0	-
3.4(c) Manganese)	-	0	-
3.4(d) Nickel)	-	0	-
3.4(e) Chromium)	-	0	-
3.4(f) Sulphur)	-	0	-
3.4(g) Phosphorus)	-	0	-
3.4(h) Copper)	-	0	-
3.4(i) Nitrogen)	-	0	-
3.4(Thickness stainless steel lid)	-	0	-
3.5(If the utensils provided with tempered glass lid)	-	0	-
4.1(Shapes and Dimensions)	-	0	-
4.2(Thickness of the sheet)	-	0	-
4.3(Classifications)	-	0	-
4.3(Core Thickness for 3-ply Construction (asper IS15960))	-	0	-
4.3(Thickness of protective layer (as per IS 15960))	-	0	-
4.4(Thickness of 3ply full body utensil)	-	0	-
5(Workmanship and finish)	-	0	-
5.4(Handles)	-	0	-
4.1 of IS 13395(Construction)	-	0	-
4.2 of IS 13395(Materials)	-	0	-
4.3 of IS 13395(Selection and Size)	-	0	-
4.4 of Is 13395(Position of Handle and Knob with Respect to Cookware)	-	0	-
4.5 of IS 13395(Attachment to Cookware)	-	0	-
5.2 of IS 13395(Bending Strength)	-	0	-
5.3 of IS 13395(Torque Strength)	-	0	-
5.4 of IS 13395(Impact Strength)	-	0	-
5.5 of IS 13395(Fatigue Resistance 15 000 cycles withstand)	-	0	-
5.6 of IS 13395(Leakage)	-	0	-
5.7 of IS 13395(Thermal Insulation)	-	0	-
5.8 of IS 13395(Heat Resistance)	-	0	-
5.9 of IS 13395(Washing Resistance)	-	0	-
5.10 of IS 13395(Burning Resistance)	-	0	-
5.5(Material comes in contact with food)	-	0	-
6.1(Staining Test)	-	0	-
6.2(Mechanical Shock Test)	-	0	-
6.3(Thermal Shock Test)	-	0	-
6.4(Dry Heat Test)	-	0	-
6.6(Heat test)	-	0	-
6.7.1(Nominal Capacity Test)	-	0	-
6.7.2(Internal diameter of utensil)	-	0	-
Annex C(Test for leaching)	-	0	-
Annex C(Sensorial test)	-	0	-

08 Feb, 2027

-
included w.e.f 26.11.2025

3442

RTRC LIMITED, GURUGRAM

9177406

IS 2465 (1984)

Specification for cables for motor vehicles (Second Revision)

specification for cables for motor vehicles

28350 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Insulation)	-	200	-
7.3(Insulation)	-	200	-
8(Core Identification)	-	200	-
9(Laying up of cores)	-	200	-
10.1.1(Sheathing )	-	200	-
10.2(Sheathing )	-	0	-
3 & 6(Flexibility class)	-	200	-
3 & 6(Construction)	-	200	-
3 & 6(Diameter of wire(mm))	-	1000	-
3 & 6(Annealing test)	-	500	-
3 & 6(Persulphate Test)	-	1000	-
3 & 6(Conductor resistance Test (ohm/km at 20˚c))	-	1000	-
7.2, 10.3, 11(Dimensions & thickness )	-	200	-
7.2, 10.3, 11(Dimensions & thickness )	-	0	-
7.2, 10.3, 11(Overall Dimension (mm))	-	0	-
4.2 & 12.1(Without Ageing For Insulation Tensile Strength (N/mm²))	-	500	-
4.2 & 12.1, (f), 1(elongation at break (N/mm²))	-	0	-
4.2 & 12.1, (f), 1(Tensile Strength at break (N/mm²))	-	0	-
4.2 & 12.1, (e), 1(elongation test at break)	-	0	-
4.2 & 12.1, (e), 1(Tensile strength at break)	-	0	-
4.2 & 12.1, (f), 2(Ageing in air oven)	-	2500	-
4.2 & 12.1, (f), 3(Ageing in oxygen bomb)	-	1000	-
4.2 & 12.1, (e), 2(After Ageing in air oven)	-	0	-
4.2 & 12.1, (e), 3(Loss of mass test (mg/cm²) of Insulation)	-	1000	-
4.2 & 12.1, (e), 3(Loss of mass test (mg/cm²) of Sheath)	-	0	-
4.2 & 12.1, (e), 4(Hot deformation test (%) of Insulation)	-	1000	-
4.2 & 12.1, (e), 4(Hot deformation test (%) of Sheath)	-	0	-
4.2 & 12.1, (e), 5(Heat Shock Test of Insulation)	-	1000	-
4.2 & 12.1, (e), 5(Heat Shock Test of Sheath)	-	0	-
4.2 & 12.1, (e), 6(Shrinkage Test (%) of Insulation)	-	500	-
4.2 & 12.1, (e), 6(Shrinkage Test (%) of Sheath)	-	0	-
14(High Voltage Test)	-	3500	-
15(SPARK TEST FOR SINGLE CORE GENERAL WIRING CABLES)	-	1000	-
16.1(CAPACITANCE TEST FOR PVC INSULATION IGNITION CABLE)	-	1000	-
17.1(OZONE RESISTANCE TEST FOR IGNITION CABLES)	-	2000	-
18.1(EFFECT OF HEAT ON FLEXIBILITY FOR IGNITION CABLES)	-	0	-
19.1(EFFECT OF OIL ON IGNITION CABLES)	-	1000	-
19.2(EFFECT OF OIL ON IGNITION CABLES)	-	0	-
20.3(EFFECT OF LUBRICATING OIL)	-	0	-
20.3(EFFECT OF LUBRICATING OIL)	-	0	-
20.3(EFFECT OF BRAKE FLUID)	-	1000	-
20.3(EFFECT OF BRAKE FLUID)	-	0	-
20.3(EFFECT OF DIESEL)	-	500	-
20.3(EFFECT OF DIESEL)	-	0	-
20.3(Increase in average diameter %)	-	0	-
20.3(Wrapping test)	-	250	-
21.1(EFFECT OF COOLING ON FLEXIBILITY)	-	500	-
21.2(EFFECT OF COOLING ON FLEXIBILITY)	-	0	-
21.2(EFFECT OF COOLING ON FLEXIBILITY)	-	0	-
22.1(FLAMMABILITY TEST)	-	3000	-
22.1(FLAMMABILITY TEST)	-	0	-
23.1(Manufacturer's Identification)	-	0	-
23.1(Manufacturer's Identification)	-	0	-
24.1(PACKING AND MARKING)	-	0	-
24.2(PACKING AND MARKING)	-	0	-
24.2.1(PACKING AND MARKING)	-	0	-
12.1.b(Persulphate test (when applicable))	-	1000	-
6.1, 12.3, 12.1.c(Conductor Resistance)	-	0	-
12.1.e4(Hot deformation)	-	1000	-
12.1.e5(Heat Shock)	-	0	-
CL.12.1 (e) 2(Tensile Strength After Ageing)	-	0	-
CL.12.1 (e) 2(Elongation After Ageing)	-	0	-
CL.12.1 (e) 2(Tensile Strength Variation)	-	0	-
CL.12.1 (e) 2(Elongation Variation)	-	0	-
CL.12.1 (e) 2(Elongation Variation)	-	0	-
Cl.12 (e) 5(Heat shock test)	-	0	-
Cl.12 (e) 4(Hot Deformation Test)	-	0	-
Cl.12 (e) 6(Shrinkage Test)	-	0	-
Cl.12 (e) 6(Shrinkage Test (Cracks Observed))	-	0	-
Cl. 12.1 (e) 3(Loss of Mass Insulation)	-	1000	-

03 Apr, 2027

-
Included w.e.f 29.09.2025

3443

RTRC LIMITED, GURUGRAM

9177406

IS 9567 (2001)

Tin or tin - Lead coated copper wire - Specificaiton (First Revision)

Tin or tin-lead coated copper wire — specification

15400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Material)	-	0	-
4.2(Resistivity)	-	1000	-
4.3(Details of Coating)	-	0	-
4.4(Diameter of Coated Wire)	-	2000	-
5(Packing and Marking)	-	0	-
6.3.1(Resistance Test)	-	1000	-
6.4.1(Measurement of Diameter)	-	1000	-
6.4.2(Elongation and Breaking Strength Test)	-	2000	-
6.4.3(Bend Test)	-	1000	-
6.4.4(Solderability Test)	-	1000	-
6.4.5(Continuity of Coating Test)	-	1000	-
6.4.6(Adherence of Coating Test)	-	1000	-

03 Apr, 2027

-
Included w.e.f 29.09.2025

3444

Ace Test Labs & Metrology Pvt. Ltd., Sonipat

9162826

IS 996 (2025)

SINGLE PHASE ac INDUCTION MOTORS FOR GENERAL PURPOSE (Fouth Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-7(Dimensions)	-	2000	-
Cl-9.1(Mounting)	-	2000	-
Cl-9.2(Terminal Box)	-	2000	-
Cl-9.3(Mounting Constructions)	-	2000	-
Cl-9.3(Mounting Constructions)	-	2000	-
Cl-9.4(Constructional Features)	-	2000	-
Cl-9.5(Earthing)	-	2000	-
Cl-10.1(Enclosures)	-	2000	-
Cl-12.1(Torques)	-	2000	-
Cl-12.1.2(Momentary overload test)	-	2000	-
Cl-12.2(Temperature Rise)	-	2000	-
Cl-12.3(Short Time Rating)	-	2000	-
Cl-12.4(Method of Testing)	-	2000	-
Cl-12.5(Performance Values)	-	2000	-
Cl-12.6(Limits of Vibration Severity)	-	2000	-
Cl-12.7(Insulation Resistance)	-	2000	-
Cl-13.1(High Voltage Values)	-	2000	-
Cl-13.2(Moisture Proofness)	-	2000	-
Cl-13.3(Leakage Current)	-	2000	-
Cl-14(Winding Resistance Measurement)	-	2000	-
Cl-15(REDUCED VOLTAGE RUNNING UP TEST AT NO LOAD)	-	2000	-
Cl-16(NOISE LEVEL)	-	2000	-
Cl-17(OVER SPEED TEST)	-	2000	-
Cl-18(TERMINAL MARKING)	-	2000	-
Cl-12.1.1(Test for torues at rated voltage and frequency)	-	2000	-
Cl-12.1.1(Pull up Torque at rated voltage and frequency)	-	2000	-
Cl-12.1.1(Test for breakaway starting current at rated voltage and frequency)	-	2000	-
Cl-12.1.2(Breakaway (starting) torque at rated voltage and frequency)	-	2000	-
Cl-12.5.1(Test for full-load performance at rated voltage and frequency)	-	2000	-
Cl-21.5(Acceptance Tests)	-	2000	-
Cl-7(Dimensions)	-	2000	-
Cl-9.1(Mounting)	-	2000	-
Cl-9.2(Terminal Box)	-	2000	-
Cl-9.3(Mounting Constructions)	-	2000	-
Cl-9.3(Mounting Constructions)	-	2000	-
Cl-9.4(Constructional Features)	-	2000	-
Cl-9.5(Earthing)	-	2000	-
Cl-10.1(Enclosures)	-	2000	-
Cl-12.1(Torques)	-	2000	-
Cl-12.1.2(Momentary overload test)	-	2000	-
Cl-12.2(Temperature Rise)	-	2000	-
Cl-12.3(Short Time Rating)	-	2000	-
Cl-12.4(Method of Testing)	-	2000	-
Cl-12.5(Performance Values)	-	2000	-
Cl-12.6(Limits of Vibration Severity)	-	2000	-
Cl-12.7(Insulation Resistance)	-	2000	-
Cl-13.1(High Voltage Values)	-	2000	-
Cl-13.2(Moisture Proofness)	-	2000	-
Cl-13.3(Leakage Current)	-	2000	-
Cl-14(Winding Resistance Measurement)	-	2000	-
Cl-15(REDUCED VOLTAGE RUNNING UP TEST AT NO LOAD)	-	2000	-
Cl-16(NOISE LEVEL)	-	2000	-
Cl-17(OVER SPEED TEST)	-	2000	-
Cl-18(TERMINAL MARKING)	-	2000	-
Cl-12.1.1(Test for torues at rated voltage and frequency)	-	2000	-
Cl-12.1.1(Pull up Torque at rated voltage and frequency)	-	2000	-
Cl-12.1.1(Test for breakaway starting current at rated voltage and frequency)	-	2000	-
Cl-12.1.2(Breakaway (starting) torque at rated voltage and frequency)	-	2000	-
Cl-12.5.1(Test for full-load performance at rated voltage and frequency)	-	2000	-
Cl-21.5(Acceptance Tests)	-	2000	-

14 Nov, 2027

-
Included w.e.f. 09.10.2025

3445

Hi Physix Laboratory India Private Limited, Pune

7126926

IS/IEC 61730 : PART 1 (2023)

Photovoltaic (PV) Module Safety Qualification Part 1 Requirements for Construction (Second Revision)

396000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Classification, applications and intended use)	-	5000	-
6.2(Marking and documentation)	-	10000	-
6.3.2(Internal wiring)	-	15000	-
6.3.3(External wiring and cables)	-	15000	-
6.3.4(Module overcurrent protection rating)	-	15000	-
6.3.5(Connectors)	-	15000	-
6.3.6(Junction boxes)	-	15000	-
6.3.7(Frontsheets and backsheets)	-	15000	-
6.3.8(Insulation barriers)	-	10000	-
6.3.9(Electrical connections)	-	15000	-
6.3.10(Encapsulants)	-	15000	-
6.3.11(Bypass diodes)	-	15000	-
6.4(Mechanical and electromechanical connections)	-	15000	-
6.4.2(Screw connections)	-	10000	-
6.4.3(Rivets)	-	10000	-
6.4.4(Thread-cutting screws)	-	10000	-
6.4.5(Form/press/tight fit)	-	15000	-
6.4.6(Connections by adhesives)	-	15000	-
6.4.7(Other connections)	-	15000	-
6.5.2(Polymeric materials)	-	15000	-
6.5.2.3(Flammability)	-	15000	-
6.5.3.2(Current-carrying parts)	-	15000	-
6.5.4(Adhesives)	-	15000	-
6.6.2(Protection against accessibility to hazardous live parts)	-	10000	-
6.6.3(Insulation coordination)	-	15000	-
6.6.3.2.1(Pollution degree)	-	5000	-
6.6.3.3(Creepage distance)	-	8000	-
6.6.3.4(Clearance)	-	8000	-
6.6.4(Distance through functional and relied upon insulation)	-	15000	-
6.6.4.3(Cemented joints)	-	10000	-
6.6.4.4(Distance through functional insulation)	-	15000	-

20 Jun, 2028

-
Included w.e.f.10.09.2025

3446

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 16090 (2013)

Geo-synthetics – Geo-textiles used as protection (or cushioning) materials – Specification

All

150000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.4, Table 1, (i)(Mass per unit area, g/m2)	-	2000	-
4.4, Table 1, (ii)(Tensile strength, kN/m)	-	2000	-
4.4, Table 1, (iii)(Trapezoidal tear strength, kN)	-	2000	-
4.5, Table 1, (iv)(CBR puncture resistance, kN)	-	2000	-
4.6, Table 1, (v)(Maximum UV resistance (after 500 h exposure), percent)	-	2000	-
6.2(Sampling)	-	2000	-
7(Packing)	-	2000	-
9.1(Identification)	-	2000	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class I(Mass per unit area, g/m2)	-	2000	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class I(Tensile strength, kN/m)	-	2000	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class I(Trapezoidal tear strength, kN)	-	2000	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class I(CBR puncture resistance, kN)	-	2000	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class I(Maximum UV resistance (after 500 h exposure), percent)	-	2000	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class II(Mass per unit area, g/m2)	-	2000	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class II(Tensile strength, kN/m)	-	2000	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class II(Trapezoidal tear strength, kN)	-	2000	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class II(Trapezoidal tear strength, kN)	-	2000	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class II(CBR puncture resistance, kN)	-	2000	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class II(Maximum UV resistance (after 500 h exposure), percent)	-	2000	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class III(Mass per unit area, g/m2)	-	2000	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class III(Tensile strength, kN/m)	-	2000	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class III(Trapezoidal tear strength, kN)	-	2000	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class III(CBR puncture resistance, kN)	-	2000	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class III(Maximum UV resistance (after 500 h exposure), percent)	-	2000	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class IV(Mass per unit area, g/m2)	-	2000	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class IV(Tensile strength, kN/m)	-	2000	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class IV(Trapezoidal tear strength, kN)	-	2000	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class IV(CBR puncture resistance, kN)	-	2000	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class IV(Maximum UV resistance (after 500 h exposure), percent)	-	2000	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class V(Mass per unit area, g/m2)	-	2000	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class V(Tensile strength, kN/m)	-	2000	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class V(Trapezoidal tear strength, kN)	-	2000	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class V(CBR puncture resistance, kN)	-	4000	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class V(Maximum UV resistance (after 500 h exposure), percent)	-	4000	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class VI(Mass per unit area, g/m2)	-	4000	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class VI(Tensile strength, kN/m)	-	4000	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class VI(Trapezoidal tear strength, kN)	-	4000	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class VI(CBR puncture resistance, kN)	-	4000	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class VI(Maximum UV resistance (after 500 h exposure), percent)	-	4000	-
4.3(Carbon black content and carbon black dispersion test)	-	4000	-

08 May, 2028

-
Included w.e.f.29.09.2025

3447

EMC Testing and Compliance LLP, Gurugram

8141526

IS 11951 (2024)

PUMPSET FOR DIRECT EVAPORATIVE AIR COOLER â SPECIFICATION (Second Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Non-Submersible Pumpset)	-	2000	-
5.1.2(Submersible Pumpset)	-	2000	-
6.1, 7.3, 9.1, 9.4.2, Table-1(Discharge Head, m)	-	2000	-
6.1, 7.3, 9.1, 9.4.2,Table-1(Minimum Discharge, l/min)	-	2000	-
6.1, 7.3, 9.1, 9.4.2, Table-1(Type 1 Motor Wattage)	-	2000	-
6.1, 7.3, 9.1, 9.4.2, Table-1(Type 2 Motor Wattage)	-	2000	-
6.1, 7.3, 9.1, 9.4.2, Table-2(Motor Wattage)	-	2000	-
6.1, 7.3, 9.1,9.4.2, Table-2(Minimum Discharge Head, Hd)	-	2000	-
6.1, 7.3, 9.1, 9.4.2,Table-2(Discharge Measurement Height, h)	-	2000	-
6.1, 7.3, 9.1, 9.4.2, Table-2(Minimum, Discharge*)	-	2000	-
Cl-8(GENERAL REQUIREMENTS)	-	10000	-
9.2(Tests on motor)	-	10000	-
9.3(Water Requirement)	-	1000	-
9.4.1(Reliability Tests)	-	1000	-
9.4.3(Ingress protection test)	-	5000	-
9.4.6(Dry Run Test)	-	5000	-
9.5(Routine Test)	-	8000	-
9.6(Type Test)	-	15000	-
9.7(Leakage current and electric strength at operating temperature)	-	5000	-
9.7(Moisture resistance)	-	5000	-
9.7(Leakage current and electric strength)	-	5000	-

19 Jul, 2027

-
Included w.e.f. 24.12.2025

3448

Central Institute of Petrochemicals Engineering & Technology (CIPET), Murthal

9121934

IS 14887 (2014)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

50 Kg

21430 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Tapes – Width and Thickness ( IS 6192/IS 11197))	-	500	Nil
3.2(Tapes – Linear Density (IS 6192/IS 11197))	-	700	Nil
3.2(Tapes – Tenacity (IS 6192/IS 11197))	-	1100	Nil
3.2(Tapes – Elongation at point of rupture (IS 6192/IS 11197))	-	1100	Nil
3.2(Tapes – Heat Shrinkage (HDPE) (Cl. 3.2 and IS 6192))	-	700	Nil
3.2(Tapes – Dimensional stability (PP) (IS 11197))	-	700	Nil
3.2(Unlaminated Fabric Mass )	-	500	Nil
3.3.1(Bottom seam (IS 10789))	-	1100	Nil
4.1 and 3.4(Mass of bale (Cl. 4.1), Capacity (Cl 3.4))	-	500	Nil
4.2 and Table 1 ii(Dimensions )	-	500	Nil
5.2 and Table 1 iii(Ends per dm )	-	500	Nil
5.2 and Table 1 iv(Picks per dm )	-	0	Ends & Picks including both test Charges is Rs. 250
4.2 and Table 1 v(Mass of sack )	-	500	Nil
4.2 and Table 1 vi(Average breaking strength of fabric )	-	1100	U.V light Exposure Test Charges Rs. 10180
4.2 and Table 1 vi(Breaking strength of bottom seam )	-	1100	Nil
4.2 and Table 1 viii(Elongation at break of fabric )	-	0	Charge for the same is included with Breaking strength of fabric charges
4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	1100	Nil
4.2 and Table 1 x(Ash content )	-	950	Nil
3.2(Tapes – Width and Thickness ( IS 6192/IS 11197))	-	500	Nil
3.1(Material Identification)	-	1050	Test Method-Chemical Analysis
3.1(Overall Migration)	-	1700	Overall Migration Distilled water/10 days/40°C Specimen Charges Rs. 625
3.2(Density)	-	500	Nil
3.2(MFI)	-	1100	Nil

09 Aug, 2028

-
-

3449

Central Institute of Petrochemicals Engineering & Technology (CIPET), Murthal

9121934

IS 11652 (2017)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg cement – Specification (third revision)

27680 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	500	Nil
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	500	Nil
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	0	Test Charges Included in Ends Test
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	500	Nil
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	0	Test Charges Included in Dimension Test
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	0	Test Charges Included in Dimension Test
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	0	Test Charges Included in Dimension Test
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	0	Test Charges Included in Dimension Test
4.1(Raw Material )	-	2000	Nil
4.2 (Linear Density, 900 denier)	-	500	Nil
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	500	Nil
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	500	Nil
4.3(Sacks)	-	500	Nil
4.4(Seam )	-	500	Nil
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	0	Test Charges Included in Seam Test
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0	Test Charges Included in Seam Test
4.4(Seam The stitching shall be done with double fold over seam to)	-	0	Test Charges Included in Seam Test
4.4(to a depth of minimum 25 mm, so that so that)	-	0	Test Charges Included in Seam Test
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0	Test Charges Included in Seam Test
4.4(The number of stitches/dm shall be 14 ± 2.)	-	0	Test Charges Included in Seam Test
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	500	Nil
4.7(Valve for Filling of Sacks)	-	500	Nil
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	0	Nil
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	1100	Nil
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	1100	Nil
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	1100	Nil
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	1100	Nil
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	0	Charges included in Breaking Strength
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	0	Charges included in Breaking Strength
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	1100	Nil
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	1200	Nil
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	1200	Nil
5/5.6 (UV Resistance, )	-	10180	Nil
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	1100	Nil
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	1100	Nil
4.5(Lamination )	-	500	Nil
4.2 (Fabric)	-	500	-

09 Aug, 2028

-
-

3450

Central Institute of Petrochemicals Engineering & Technology (CIPET), Murthal

9121934

IS 14252 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sack for filling sand – Specification (second revision)

21690 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Raw Material)	-	2000	Nil
3.2(Tapes – Width )	-	500	Nil
3.2(Tapes – Linear Density )	-	500	Nil
3.3(Tying Cord)	-	500	Nil
3.4(Sack)	-	500	Nil
3.4.1(Seam)	-	500	Nil
4.1 and Table 1 i a(Dimensions Outside Length)	-	500	Nil
4.1 and Table 1 i b(Dimensions Outside Width)	-	500	Nil
4.1 and Table 1 ii(Ends per dm )	-	500	Nil
4.1 and Table 1 iii(Picks per dm )	-	0	Test Charges included in Ends per dm
4.2 and Table 1 iv(Mass of sack )	-	500	Nil
4.1 and Table 1 v a(Average breaking strength of fabric Warpway )	-	1100	Nil
4.1 and Table 1 v b(Average breaking strength of fabric Weftway )	-	1100	Nil
4.1 and Table 1 vi(Average Breaking strength of bottom seam )	-	1100	Nil
4.1 and Table 1 vii a(Elongation at break of fabric Lengthwise)	-	0	Test Charges included in Breaking strength
4.1 and Table 1 vii b(Elongation at break of fabric Widthwise )	-	0	Test Charges included in Breaking strength
4.1 and Table 1 viii(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	12540	UV light exposure Rs. 10340 Breaking strength (warp & weft)
4.1 and Table 1 ix(Ash content )	-	1200	Nil
3.2 (Mesh size and weight is g/cm2) (amendment 3)(Mesh size and weight is g/cm2)	-	500	-

09 Aug, 2028

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number

No Record Found