BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

14050 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

3361

Advance Firetec and Research Lab Pvt. Ltd

8176606

IS 17870 (2022)

COMMERCIAL PRESSURE COOKER SPECIFICATION

40400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Gross nominal capacity)	-	100	-
4.2(body of the cooker)	-	100	-
6.1.1(passage from the interior of the vesse)	-	200	For clause no- 6 & 6.1.1
6.1.2(pressure regulating device(PRD))	-	100	-
6.1.3(PRD with lifting attachment)	-	100	-
6.1.4(PRD Dead weight)	-	100	-
6.1.5(Vent pipe nut)	-	100	-
6.1.6(Metallic Chain (for linking PRD Sleeve with Vent Tube))	-	100	-
6.2(Safety Relief Device)	-	300	For Clause no- 6.2, 6.2.1 & 6.2.2
6.3(Temperature Responsive Pressure Relief Device)	-	3000	-
6.4(Handles and Knobs)	-	10000	For Clause no- 6.4 & all the performance test as per clause no-8.9
7.1(Body and lid)	-	100	-
7.2(Stand and Components)	-	100	-
11.1(Marking)	-	26000	For all the performance test as per clause no-8 (except-8.9, Handle & knobs)

03 Mar, 2027

-
Included w.e.f.04.07.2025 Exclusion Cl 7.4 (Hard Anodized cooker), Excluding Cl 5 Matarial

3362

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 16468 (2016)

Medical textiles â€“ Absorbent cotton (Sterile and non-sterile) â€“ Specification

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Workmanship and Finish)	-	200	-
4.1 - Table 1 - (i)(Fibre Identification)	-	2500	-
4.1 - Table 1 - (ii)(Foreign fibres)	-	2500	-
4.1 - Table 1 - (iii)(Neps max)	-	2500	-
4.1 - Table 1 - (iv)(Fluorescence)	-	4000	-
4.1 - Table 1 - (v)(Loss on drying)	-	1000	-
4.1 - Table 1 - (vi)(Absorbancy)	-	3000	-
4.1 - Table 1 - (vi) -(a)(Shrinking time)	-	3000	-
4.1 - Table 1 - (vi) -(b)(Water holding time)	-	3000	-
4.1 - Table 1 - (vii)(Ph of aqueous extract)	-	100	-
4.1 - Table 1 - (viii)(Extractable coloring matter)	-	2500	-
4.1 - Table 1 - (ix)(Water soluble substance)	-	1500	-
4.1 - Table 1 - (x)(Ether soluble substance)	-	1500	-
4.1 - Table 1 - (xi)(Sulphated ash)	-	1000	-
4.1 - Table 1 - (xiii)(Sterility)	-	0	-
6.1(Marking)	-	200	-
8(Packing)	-	200	-
4.1 - Table 1 - (xii)(Surface active substance)	-	2500	-

26 Jul, 2027

-
Included w.e.f 26.05.2025 Exclusion: Cl 4.1 - Table 1 - (xiii) (Sterility)

3363

Electrical Research and Development Association (ERDA), Vadodara, Gujarat

7101125

IS 374 (2019)

Specification for electric ceiling type fans and regulators (Third Revision)

600 mm to 1500 mm

43090 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	500	-
8.1,a(Marking )	-	0	-
8.1,b(Marking )	-	0	-
8.1,c(Marking )	-	0	-
8.1,d(Marking )	-	0	-
8.1,e(Marking )	-	0	-
8.1,f(Marking )	-	0	-
8.1,g(Marking )	-	0	-
8.2(Marking )	-	0	-
8.3,a(Marking )	-	0	-
8.3,b(Marking )	-	0	-
8.3,c(Marking )	-	0	-
8.3,d(Marking )	-	0	-
8.3,e(Marking )	-	0	-
8.4(Marking )	-	0	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	0	-
6.2(Rating)	-	0	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	500	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	500	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	850	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	500	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	0	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	6500	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	2850	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	0	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	500	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	650	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	500	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	1100	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	550	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	500	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	840	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	0	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	1150	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	500	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	500	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	500	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	500	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	0	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	2850	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	500	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	500	-
10.1(Speed Regulators)	-	2250	-
10.2(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.3(Speed Regulators)	-	0	-
10.4(Speed Regulators)	-	0	-
10.5(Speed Regulators)	-	0	-
10.6(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.8(Speed Regulators)	-	0	-
11.1(Starting)	-	500	-
11.2(Starting)	-	0	-
12(Interchangeability)	-	500	-
13(Silent Operation)	-	500	-
14.3 & Table 1(Test for Air Performance)	-	9800	-
14.3 & Table 1(Test for Air Performance)	-	0	-
14.4(Measurement of Speed of the Fan )	-	250	-
14.4(Measurement of Speed of the Fan )	-	0	-
14.5(Measurement of Power factor and Power Input)	-	250	-
14.5(Measurement of Power factor and Power Input)	-	0	-
16(Endurance Test)	-	2250	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
17(Test for Harmonic Distortion)	-	2450	-
15.1, 15.2(Air delivery and service value)	-	9800	-
Cl-9 (Cl-19.11.4.1 of IS 302-1)(Electrostatic discharge)	-	8500	if this test is applicable then additional test charge of Rs. 8500/- applicable above the regular test charge of Rs. 43090/-
Cl-9 (Cl-19.11.4.2 of IS 302-1)(Radiated Fields)	-	25000	if this test is applicable then additional test charge of Rs. 25000/- applicable above the regular test charge of Rs. 43090/-
Cl-9 (Cl-19.11.4.3 of IS 302-1)(Fast transient bursts)	-	8500	if this test is applicable then additional test charge of Rs. 8500/- applicable above the regular test charge of Rs. 43090/-
Cl-9 (Cl-19.11.4.4 of IS 302-1)(Surge Immunity test)	-	16000	if this test is applicable then additional test charge of Rs. 16000/- applicable above the regular test charge of Rs. 43090/-
Cl-9 (Cl-19.11.4.5 of IS 302-1)(Immunity to conducted discharge)	-	9500	if this test is applicable then additional test charge of Rs. 9500/- applicable above the regular test charge of Rs. 43090/-
Cl-9 (Cl-19.11.4.6 of IS 302-1)(Voltage dips and interruptions)	-	15800	if this test is applicable then additional test charge of Rs. 15800/- applicable above the regular test charge of Rs. 43090/-
(Cl.4.4 of IS 374: 2019)(Bearings)	-	0	-
(Cl. 4.5 of IS 374: 2019)(Brushless DC Motor)	-	0	-
(Cl.4.6 of IS 374: 2019)(Enclosure)	-	0	-
4(GENERAL REQUIREMENTS)	-	0	-
5(GENERAL NOTES ON TESTS)	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	500	-
8.1,a(Marking )	-	0	-
8.1,b(Marking )	-	0	-
8.1,c(Marking )	-	0	-
8.1,d(Marking )	-	0	-
8.1,e(Marking )	-	0	-
8.1,f(Marking )	-	0	-
8.1,g(Marking )	-	0	-
8.2(Marking )	-	0	-
8.3(Marking )	-	0	-
8.3,a(Marking )	-	0	-
8.3,b(Marking )	-	0	-
8.3,c(Marking )	-	0	-
8.3,d(Marking )	-	0	-
8.3,e(Marking )	-	0	-
8.4(Marking )	-	0	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	0	-
6.2(Rating)	-	0	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	500	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	500	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	850	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	500	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	0	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	6500	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	2850	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	0	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	500	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	650	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	500	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	1100	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	550	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	500	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	840	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	0	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	1150	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	500	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	500	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	500	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	500	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	0	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	2850	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	500	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	500	-
10.1(Speed Regulators)	-	2250	-
10.2(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.3(Speed Regulators)	-	0	-
10.4(Speed Regulators)	-	0	-
10.5(Speed Regulators)	-	0	-
10.6(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.8(Speed Regulators)	-	0	-
11.1(Starting)	-	500	-
11.2(Starting)	-	0	-
12(Interchangeability)	-	500	-
13(Silent Operation)	-	500	-
14.3 & Table 1(Test for Air Performance)	-	9800	-
14.3 & Table 1(Test for Air Performance)	-	0	-
14.4(Measurement of Speed of the Fan )	-	250	-
14.4(Measurement of Speed of the Fan )	-	0	-
14.5(Measurement of Power factor and Power Input)	-	250	-
14.5(Measurement of Power factor and Power Input)	-	0	-
16(Endurance Test)	-	2250	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
17(Test for Harmonic Distortion)	-	2450	-
Cl-9 (Cl-19.101 of IS 302-1)(Abnormal Operation)	-	0	-
(Cl. 17 of IS 302-2-80 :2017)(Overload protection of transformers and associated circuits)	-	500	-
(Cl. 7.6 of IS 302 Part 1)(Marking and Instructions)	-	500	-
Cl. 7.8 of IS 302-2-80 :2017(MARKING AND INSTRUCTIONS)	-	0	-
(Cl. 7.12 of IS 302-2-80 :2017)(Marking and Instructions)	-	0	-
(Cl. 7.12.1 of IS 302-2-80 :2017)(Marking and Instructions)	-	0	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 7.12.7 of IS 302-1: 2008(Marking and Instructions)	-	0	-
(Cl. 7.13 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 7.14 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 10.1 of IS 374: 2019)(SPEED REGULATORS)	-	2250	-
(Cl. 10.3 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.4 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.7 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.7 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.8 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 11.2 of IS 374: 2019)(STARTING)	-	500	-
(Cl. 13 of IS 374: 2019)(SILENT OPERATION)	-	500	-
(Cl. 15.1 of IS 374: 2019)(PERFORMANCE REQUIREMENTS)	-	9800	-
(Cl. 15.1 of IS 374: 2019)(PERFORMANCE REQUIREMENTS)	-	0	-
(Cl. 17 of IS 374: 2019(Test for Harmonic Distortion)	-	2450	-
(Cl. 8.2 of IS 302-1: 2008)(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	500	-
(Cl. 11 of IS 302-1: 2008)(HEATING)	-	850	-
(Cl. 15 of IS 302-1: 2008)(MOISTURE RESISTANCE)	-	2850	-
(Cl. 15 of IS 302-1: 2008)(MOISTURE RESISTANCE)	-	0	-
(Cl. 15 of IS 302-1: 2008.(MOISTURE RESISTANCE)	-	0	-
(Cl. 17 of IS 302-1: 2008)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	500	-
(Cl. 17 of IS 302-1: 2008)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	650	-
(Cl. 19.7 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19 of IS 302-2-80 :2017)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 20.102 of IS 302-2-80 :2017)(STABILITY AND MECHANICAL HAZARDS)	-	500	-
(Cl. 22.2 of IS 302-1: 2008)(CONSTRUCTION)	-	550	-
(Cl. 22.14 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.18 of IS 302-1: 2008)(Electric Ceiling type fan-Specification)	-	0	-
(Cl. 22.21 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.22 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.41 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.44 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.101 of IS 302-2-80: 2017)(CONSTRUCTION)	-	0	-
(Cl. 23.1 of IS 302-1: 2008)(INTERNAL WIRING)	-	500	-
(Cl. 23.2 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.4 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.5 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.6 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.7 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.9 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.10 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 24.1 of IS 302-1: 2008)(COMPONENTS)	-	840	-
(Cl. 24.5 of IS 302-1: 2008)(COMPONENTS)	-	0	-
(Cl. 24.105 of IS IS 302-2-80 :2017)(COMPONENTS)	-	0	-
(Cl. 26.1 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	500	-
(Cl. 26.8 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
(Cl. 26.9 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
(Cl. 26.10 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
(Cl. 27.1 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	500	-
(Cl. 27.2 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	0	-
(Cl. 27.4 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	0	-
(Cl. 27.5 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	0	-
(Cl. 28.4 of IS 302-1: 2008)(SCREWS AND CONNECTIONS)	-	500	-
(Cl. 30.2 of IS 302-1: 2008)(RESISTANCE TO HEAT AND FIRE)	-	2850	-
(Cl. 30.2 of IS 302-1: 2008)(RESISTANCE TO HEAT AND FIRE)	-	0	-
(Cl. 32 of IS 302-1: 2008)(Radiation, toxicity and similar hazards)	-	500	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	500	-
8.1,a(Marking )	-	0	-
8.1,b(Marking )	-	0	-
8.1,c(Marking )	-	0	-
8.1,d(Marking )	-	0	-
8.1,e(Marking )	-	0	-
8.1,f(Marking )	-	0	-
8.1,g(Marking )	-	0	-
8.2(Marking )	-	0	-
8.3,a(Marking )	-	0	-
8.3,b(Marking )	-	0	-
8.3,c(Marking )	-	0	-
8.3,d(Marking )	-	0	-
8.3,e(Marking )	-	0	-
8.4(Marking )	-	0	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	0	-
6.2(Rating)	-	0	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	500	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	500	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	850	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	500	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	0	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	6500	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	2850	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	0	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	500	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	650	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	500	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	1100	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	550	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	500	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	840	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	0	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	1150	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	500	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	500	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	500	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	500	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	0	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	2850	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	500	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	500	-
10.1(Speed Regulators)	-	2250	-
10.2(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.3(Speed Regulators)	-	0	-
10.4(Speed Regulators)	-	0	-
10.5(Speed Regulators)	-	0	-
10.6(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.8(Speed Regulators)	-	0	-
11.1(Starting)	-	500	-
11.2(Starting)	-	500	-
12(Interchangeability)	-	500	-
13(Silent Operation)	-	500	-
14.3 & Table 1(Test for Air Performance)	-	9800	-
14.3 & Table 1(Test for Air Performance)	-	0	-
14.4(Measurement of Speed of the Fan )	-	250	-
14.4(Measurement of Speed of the Fan )	-	0	-
14.5(Measurement of Power factor and Power Input)	-	250	-
14.5(Measurement of Power factor and Power Input)	-	0	-
16(Endurance Test)	-	2250	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
17(Test for Harmonic Distortion)	-	2450	-
15.1, 15.2(Air delivery and service value)	-	9800	-
Cl-9 (Cl-19.11.4.1 of IS 302-1)(Electrostatic discharge)	-	0	-
Cl-9 (Cl-19.11.4.2 of IS 302-1)(Radiated Fields)	-	0	-
Cl-9 (Cl-19.11.4.3 of IS 302-1)(Fast transient bursts)	-	0	-
Cl-9 (Cl-19.11.4.4 of IS 302-1)(Surge Immunity test)	-	0	-
Cl-9 (Cl-19.11.4.5 of IS 302-1)(Immunity to conducted discharge)	-	0	-
Cl-9 (Cl-19.11.4.6 of IS 302-1)(Voltage dips and interruptions)	-	0	-
(Cl.4.4 of IS 374: 2019)(Bearings)	-	0	-
(Cl. 4.5 of IS 374: 2019)(Brushless DC Motor)	-	0	-
(Cl.4.6 of IS 374: 2019)(Enclosure)	-	0	-
4(GENERAL REQUIREMENTS)	-	0	-
5(GENERAL NOTES ON TESTS)	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	500	-
8.1,a(Marking )	-	0	-
8.1,b(Marking )	-	0	-
8.1,c(Marking )	-	0	-
8.1,d(Marking )	-	0	-
8.1,e(Marking )	-	0	-
8.1,f(Marking )	-	0	-
8.1,g(Marking )	-	0	-
8.2(Marking )	-	0	-
8.3(Marking )	-	0	-
8.3,a(Marking )	-	0	-
8.3,b(Marking )	-	0	-
8.3,c(Marking )	-	0	-
8.3,d(Marking )	-	0	-
8.3,e(Marking )	-	0	-
8.4(Marking )	-	0	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	0	-
6.2(Rating)	-	0	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	500	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	500	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	850	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	500	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	0	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	6500	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	2850	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	0	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	500	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	650	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	500	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	1100	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	550	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	500	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	840	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	0	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	1150	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	500	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	500	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	500	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	500	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	0	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	2850	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	500	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	500	-
10.1(Speed Regulators)	-	2250	-
10.2(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.3(Speed Regulators)	-	0	-
10.4(Speed Regulators)	-	0	-
10.5(Speed Regulators)	-	0	-
10.6(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.8(Speed Regulators)	-	0	-
11.1(Starting)	-	500	-
11.2(Starting)	-	0	-
12(Interchangeability)	-	500	-
13(Silent Operation)	-	500	-
14.3 & Table 1(Test for Air Performance)	-	9800	-
14.3 & Table 1(Test for Air Performance)	-	0	-
14.4(Measurement of Speed of the Fan )	-	250	-
14.4(Measurement of Speed of the Fan )	-	0	-
14.5(Measurement of Power factor and Power Input)	-	250	-
14.5(Measurement of Power factor and Power Input)	-	0	-
16(Endurance Test)	-	2250	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
17(Test for Harmonic Distortion)	-	2450	-
Cl-9 (Cl-19.101 of IS 302-1)(Abnormal Operation)	-	0	-
(Cl. 17 of IS 302-2-80 :2017)(Overload protection of transformers and associated circuits)	-	500	-
(Cl. 7.6 of IS 302 Part 1)(Marking and Instructions)	-	500	-
Cl. 7.8 of IS 302-2-80 :2017(MARKING AND INSTRUCTIONS)	-	0	-
(Cl. 7.12 of IS 302-2-80 :2017)(Marking and Instructions)	-	0	-
(Cl. 7.12.1 of IS 302-2-80 :2017)(Marking and Instructions)	-	0	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 7.12.7 of IS 302-1: 2008(Marking and Instructions)	-	0	-
(Cl. 7.13 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 7.14 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 10.1 of IS 374: 2019)(SPEED REGULATORS)	-	2250	-
(Cl. 10.3 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.4 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.7 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.7 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.8 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 11.2 of IS 374: 2019)(STARTING)	-	500	-
(Cl. 13 of IS 374: 2019)(SILENT OPERATION)	-	500	-
(Cl. 15.1 of IS 374: 2019)(PERFORMANCE REQUIREMENTS)	-	9800	-
(Cl. 15.1 of IS 374: 2019)(PERFORMANCE REQUIREMENTS)	-	0	-
(Cl. 17 of IS 374: 2019(Test for Harmonic Distortion)	-	2450	-
(Cl. 8.2 of IS 302-1: 2008)(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	500	-
(Cl. 11 of IS 302-1: 2008)(HEATING)	-	850	-
(Cl. 15 of IS 302-1: 2008)(MOISTURE RESISTANCE)	-	2850	-
(Cl. 15 of IS 302-1: 2008)(MOISTURE RESISTANCE)	-	0	-
(Cl. 15 of IS 302-1: 2008.(MOISTURE RESISTANCE)	-	0	-
(Cl. 17 of IS 302-1: 2008)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	500	-
(Cl. 17 of IS 302-1: 2008)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	650	-
(Cl. 19.7 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19 of IS 302-2-80 :2017)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 20.102 of IS 302-2-80 :2017)(STABILITY AND MECHANICAL HAZARDS)	-	500	-
(Cl. 22.2 of IS 302-1: 2008)(CONSTRUCTION)	-	550	-
(Cl. 22.14 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.18 of IS 302-1: 2008)(Electric Ceiling type fan-Specification)	-	0	-
(Cl. 22.21 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.22 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.41 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.44 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.101 of IS 302-2-80: 2017)(CONSTRUCTION)	-	0	-
(Cl. 23.1 of IS 302-1: 2008)(INTERNAL WIRING)	-	500	-
(Cl. 23.2 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.4 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.5 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.6 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.7 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.9 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.10 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 24.1 of IS 302-1: 2008)(COMPONENTS)	-	840	-
(Cl. 24.5 of IS 302-1: 2008)(COMPONENTS)	-	0	-
(Cl. 24.105 of IS IS 302-2-80 :2017)(COMPONENTS)	-	500	-
(Cl. 26.1 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
(Cl. 26.8 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
(Cl. 26.9 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
(Cl. 26.10 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
(Cl. 27.1 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	500	-
(Cl. 27.2 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	0	-
(Cl. 27.4 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	0	-
(Cl. 27.5 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	0	-
(Cl. 28.4 of IS 302-1: 2008)(SCREWS AND CONNECTIONS)	-	500	-
(Cl. 30.2 of IS 302-1: 2008)(RESISTANCE TO HEAT AND FIRE)	-	2850	-
(Cl. 30.2 of IS 302-1: 2008)(RESISTANCE TO HEAT AND FIRE)	-	0	-
(Cl. 32 of IS 302-1: 2008)(Radiation, toxicity and similar hazards)	-	500	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-

30 Nov, 2028

-
Included w.e.f 20.06.2025 Exclusion: Cl 9(Cl 19.11.4.7 of IS 302-1)Harmonics

3364

Global Scientific Solution (P) Ltd.

8189526

IS 8978 (1992)

Specification for electric instantaneous water heaters (Second Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.7 of IS 302-2-35:2017(Marking)	-	1000	-
Cl.7 of IS 302-2-35:2017(Marking)	-	1000	-
Cl.7 of IS 302-2-35:2017(Marking)	-	1000	-
Cl.7 of IS 302-2-35:2017(Marking)	-	1000	-
Cl.7 of IS 302-2-35:2017(Marking)	-	1000	-
Cl.7 of IS 302-2-35:2017(Marking)	-	1000	-
Cl.7 of IS 302-2-35:2017(Marking)	-	1000	-
Cl.7 of IS 302-2-35:2017(Marking)	-	1000	-
Cl.7 of IS 302-2-35:2017(Marking)	-	1000	-
Cl.7 of IS 302-2-35:2017(Marking)	-	1000	-
Cl.7 of IS 302-2-35:2017(Marking)	-	1000	-
Cl.7 of IS 302-2-35:2017(Marking)	-	1000	-
Cl.7 of IS 302-2-35:2017(Marking)	-	1000	-
Cl.7 of IS 302-2-35:2017(Marking)	-	1000	-
Cl.7 of IS 302-2-35:2017(Marking)	-	1000	-
Cl.7 of IS 302-2-35:2017(Marking)	-	1000	-
Cl.7 of IS 302-2-35:2017(Marking)	-	1000	-
Cl.7 of IS 302-2-35:2017(Marking)	-	1000	-
Cl.7 of IS 302-2-35:2017(Marking)	-	1000	-
Cl.7 of IS 302-2-35:2017(Marking)	-	1000	-
Cl.7 of IS 302-2-35:2017(Marking)	-	1000	-
Cl.7 of IS 302-2-35:2017(Marking)	-	1000	-
Cl.7 of IS 302-2-35:2017(Marking)	-	1000	-
Cl.7 of IS 302-2-35:2017(Marking)	-	1000	-
Cl.7 of IS 302-2-35:2017(Marking)	-	1000	-
Cl.6 of IS 302-2-35:2017(Classification)	-	1000	-
Cl.6 of IS 302-2-35:2017(Classification)	-	1000	-
Cl.24 of IS 302-2-35:2017(Component )	-	1000	-
Cl.8 of IS 302-2-35:2017(Protection Against Access To Live Parts)	-	1000	-
Cl.10 of IS 302-2- 35:2011(Power Input & Current )	-	1000	-
Cl.11 of 302-2-35:2017(Heating)	-	1000	-
Cl.11 of 302-2-35:2017(Heating)	-	1000	-
Cl.11 of 302-2-35:2017(Heating)	-	1000	-
Cl.25.15 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Cord grip test )	-	1000	-
Cl.11 of 302-2-35:2017(Heating)	-	1000	-
Cl.13 of IS 302-2-35:2017(Leakage Current & Electrical Strength at Operating Temperature )	-	2000	-
Cl.13 of IS 302-2-35:2017(Leakage Current & Electrical Strength at Operating Temperature )	-	2000	-
Cl.14 of IS 302-2-35:2017(Transient Over Voltages )	-	1000	-
Cl.15 of IS 302-2-35-2011(Moisture Resistance )	-	2000	-
Cl.15 of IS 302-2-35-2011(Moisture Resistance )	-	2000	-
Cl.16 of IS 302-2-35:2011(Leakage Current and Electric Strength)	-	2000	-
Cl.16 of IS 302-2-35:2011(Leakage Current and Electric Strength)	-	2000	-
Cl.17 IS 302-2-35:2017(Overload Protection of Transformers & Associated circuits )	-	1000	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	1000	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	1000	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	1000	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	1000	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	1000	-
Cl.20 of IS 302-2-35-2011(Stability & Mechanical Hazards )	-	1000	-
Cl.21.1 of IS 302-2-35-2011(Mechanical strength)	-	1000	-
Cl. 21.2 of IS 302-1:2008(Mechanical strength)	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	1000	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	1000	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	1000	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	1000	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	1000	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	1000	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	1000	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	1000	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	1000	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	1000	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	1000	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	1000	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	1000	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	1000	-
Cl.24 of IS 302-2-35:2017(Component )	-	1000	-
Cl.24 of IS 302-2-35:2017(Component )	-	1000	-
Cl.24 of IS 302-2-35:2017(Component )	-	1000	-
Cl.24 of IS 302-2-35:2017(Component )	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	1000	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	1000	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	1000	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	1000	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	1000	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	1000	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	1000	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	1000	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	1000	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	1000	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	1000	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	1000	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	1000	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	1000	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	1000	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	1000	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	1000	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	1000	-
Cl.28 of IS 302-2-35:2017(Screws and Connections )	-	1000	-
Cl.29 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation)	-	1000	-
Cl.29 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation)	-	1000	-
Cl.29 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation)	-	1000	-
Cl.30 of IS 302-2-35: 2011(Resistance to Heat and Fire)	-	1000	-
Cl.30 of IS 302-2-35: 2011(Resistance to Heat and Fire)	-	1000	-
Cl.31 of IS 302-2-35: 2011(Resistance to Rusting )	-	1000	-
Cl.32 of IS 302-2-35: 2011(Radiation, Toxicity and Similar Hazards )	-	1000	-
Cl.10 of IS 8978 : 1992(Finish)	-	1000	-
Cl.11 of IS 8978 : 1992(Operation of flow switch)	-	1000	-
Cl.12 of IS 8978 : 1992(Endurance)	-	1000	-
Cl.12 of IS 8978 : 1992(Endurance)	-	1000	-
Cl.10 of IS 8978 : 1992(Finish)	-	1000	-
Cl.31 of IS 302-2-35: 2017(Resistance to Rusting )	-	1000	-
Cl.30.2 of IS 302-1:2008(Resistance to Heat and Fire)	-	1000	-
Cl.30.1 of IS 302-1:2008(Resistance to Heat and Fire)	-	1000	-
Cl.29.2 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation : Creepage distance )	-	1000	-
Cl.29.1 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation : Clearance distance )	-	1000	-
Cl.28 of IS 302-2-35:2017(Screws and Connections )	-	1000	-
Cl.27.5 of IS 302-2-35:2017(Provision for Earthing : ECR )	-	1000	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	1000	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	1000	-
Cl.25.18 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25.15 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Cord grip test - displacement )	-	1000	-
Cl.25.12 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Moulding of supply cord )	-	1000	-
Cl.25.10 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Colour of Earthing conductor )	-	1000	-
Cl.25.8 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Resistance of supply cord )	-	1000	-
Cl.25.5 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Type of attachment )	-	1000	-
Cl.25.1 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : connection to the supply mains)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.24 of IS 302-2-35:2017(Component )	-	1000	-
Cl.23 of IS 302-2-35:2017(Internal Wiring ; Colour of earthing conductor)	-	1000	-
Cl.23 of IS 302-2-35:2017(Internal Wiring)	-	1000	-
Cl.22.110 of IS 302-2-35:2017(Construction : Provision for fixing to wall )	-	1000	-
Cl.22.109 of IS 302-2-35:2017(Construction : Operation of presure switch of open outlet water heater )	-	1000	-
Cl.22.108 of IS 302-2-35:2017(Construction : Temperature of outlet water intended to supply for showring )	-	1000	-
Cl.22.107 of IS 302-2-35:2017(Construction : Temperature of outlet )	-	1000	-
Cl.22.106 of IS 302-2-35:2017(Construction : Operation of thermal cut out for closed water heater )	-	1000	-
Cl.22.104 of IS 302-2-35:2017(Construction : Pressure in open outlet water heaters )	-	1000	-
Cl.22.103 of IS 302-2-35:2017(Construction : Pressure relief device operation for closed water heater )	-	1000	-
Cl.22.102 of IS 302-2-35:2017(Construction : excessive temperature of outlet )	-	1000	-
Cl.22.101 of IS 302-2-35:2017(Construction : Rated pressure of closed water heater )	-	1000	-
Cl.22.47 of IS 302-2-35:2017(Construction : Water pressure test )	-	1000	-
Cl.22.44 of IS 302-1:2008(Construction : Shape and decoration )	-	1000	-
Cl.22.33 of IS 302-1:2008(Construction : Direct contact of liquids )	-	1000	-
Cl 22.26 ,Cl.22.28, Cl 22.29, Cl 22.30 , Cl 22.31, Cl 22.32 of IS 302-1:2008(Construction : Supplymentry/ double / reinforced insulation for Class II/ Class III appliance )	-	1000	-
Cl.22.18 of IS 302-1:2008(Construction : Resistance to corrosion )	-	1000	-
Cl.22.17 of IS 302-1:2008(Construction : Spacers )	-	1000	-
Cl.22.14 of IS 302-1:2008(Construction : Ragged or sharp edges )	-	1000	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knob, grips, levers and similar parts )	-	1000	-
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable parts )	-	1000	-
Cl.22.7 of IS 302-1:2008(Construction : safeguards against the risk of excessive pressure. )	-	1000	-
Cl.22.6 of IS 302-2-35:2017(Construction : size of drain hole )	-	1000	-
Cl.22.6 of IS 302-1:2008(Construction : effect of water on 3 insulation )	-	1000	-
Cl.22.2 of IS 302-1:2008(Construction : connection to supply mains )	-	1000	-
Cl.22.1 of IS 302-1:2008(Construction : IP test )	-	1000	-
Cl. 21.2 of IS 302-1:2008(Mechanical strength : prevent penetration by sharp implements. )	-	1000	-
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	1000	-
Cl.20 of IS 302-2-35:2017(Stability & Mechanical Hazards )	-	1000	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : effect on container)	-	1000	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : High voltage)	-	1000	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : Temperature rise of insulation of supply cord)	-	1000	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : Temperature rise of test corner)	-	1000	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : Emission of flames, molten metal ,or poisonous or ignitable gas)	-	1000	-
Cl.16 of IS 302-2-35:2017(Leakage Current and Electric Strength (After Humidity))	-	1000	-
Cl.16 of IS 302-2-35:2017(Leakage Current and Electric Strength (After Humidity))	-	1000	-
Cl.15 of IS 302-2-35:2017(Moisture Resistance )	-	1000	-
Cl.14 of IS 302-2-35:2017(Transient Over Voltages )	-	1000	-
Cl.13 of IS 302-2-35:2017(Leakage Current & 3 Strength at Operating Temperature : High voltage )	-	1000	-
Cl.13 of IS 302-2-35:2017(Leakage Current & 3 Strength at Operating Temperature )	-	1000	-
Cl.11 of 302-2-35:2017(Heating : room temperature)	-	1000	-
Cl.11 of 302-2-35:2017(Heating : Insulation of supply cord)	-	1000	-
Cl.11 of 302-2-35:2017(Heating : Temperature rise of test corner)	-	1000	-
Cl.10 of IS 302-2- 35:2017(Power Input & Current )	-	1000	-
Cl.8 of IS 302-2-35:2017(Protection Against Access To Live Parts)	-	1000	-
Cl.7.102 of IS 302-2-35:2017(Marking : Standard mark)	-	1000	-
Cl.7.101 of IS 302-2-35:2017(Marking : Woter inlet and outlet idetification)	-	1000	-
Cl.7.15 of IS 302-1:2008(Marking : Position of marking)	-	1000	-
Cl.7.14 of IS 302-1:2008(Marking ; Legibility and durability)	-	1000	-
Cl.7.13 of IS 302-1:2008(Marking : Language)	-	1000	-
Cl.7.10 & 7.11 of IS 302-1:2008(Marking : Indication for direction of control)	-	1000	-
Cl.7.8 of IS 302-1:2008(Marking : Terminal for connection )	-	1000	-
Cl.7.6 of IS 302-1:2008(Marking : Symbols)	-	1000	-
Cl.7.1 of IS 302-2-35:2017(Marking : rated pressure)	-	1000	-
Cl.7.1 of IS 302-1:2008(Marking : Country of manufacture)	-	1000	-
Cl.7.1 of IS 302-1:2008(Marking : IP number )	-	1000	-
Cl.7.1 of IS 302-1:2008(Marking : Symbol for class II)	-	1000	-
Cl.7.1 of IS 302-1:2008(Marking : Molel or type)	-	1000	-
Cl.7.1 of IS 302-1:2008(Marking : Manufacture identification)	-	1000	-
Cl.7.1 of IS 302-1:2008(Marking : Rated power input)	-	1000	-
Cl.7.1 of IS 302-1:2008(Marking : Nature of supply)	-	1000	-
Cl.7.1 of IS 302-1:2008(Marking : Rated Voltage)	-	1000	-
4(GENERAL REQUIREMENTS)	-	1000	-
5(GENERAL NOTE ON TEST)	-	1000	-
Cl-19.11.4.1(Electrostatic discharge)	-	0	-
Cl-19.11.4.2(Radiated Fields)	-	0	-
Cl-19.11.4.3(Fast transient bursts)	-	0	-
Cl-19.11.4.4(Surge Immunity test)	-	0	-
Cl-19.11.4.5(Immunity to conducted discharge)	-	0	-
Cl-19.11.4.6(Voltage dips and interruptions)	-	0	-
Cl-19.11.4.7(Harmonics)	-	0	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
(Cl.7.1 of IS 302-2-35:2017)(Marking)	-	1000	-
(Cl.7.101 of IS 302-2-35:2017)(Marking)	-	1000	-
(Cl.8.1.1 of IS 8978:1992)(Marking)	-	1000	-
(Cl.19.13 of IS 302-2-35:2017)(Abnormal operation)	-	1000	-
(Cl.19.13 of IS 302-2-35:2017)(Abnormal operation)	-	1000	-
(Cl.22 of IS 302-2-35:2017)(Construction)	-	1000	-
(Cl.22 of IS 302-2-35:2017)(Construction)	-	1000	-
(Cl.22 of IS 302-2-35:2017)(Construction)	-	1000	-
(Cl.22 of IS 302-2-35:2017)(Construction)	-	1000	-
(Cl.22 of IS 302-2-35:2017)(Construction)	-	1000	-
(Cl.22 of IS 302-2-35:2017)(Construction)	-	1000	-
(Cl.22 of IS 302-2-35:2017)(Construction)	-	1000	-
(Cl.22 of IS 302-2-35:2017)(Construction)	-	1000	-
(Cl.22 of IS 302-2-35:2017)(Construction)	-	1000	-
(Cl.22 of IS 302-2-35:2017)(Construction)	-	1000	-
(Cl.23 of IS 302-2-35:2017)(Internal wiring)	-	1000	-
(Cl.23 of IS 302-2-35:2017)(Internal wiring)	-	1000	-
(Cl.23 of IS 302-2-35:2017)(Internal wiring)	-	1000	-
(Cl.23 of IS 302-2-35:2017)(Internal wiring)	-	1000	-
(Cl.24 of IS 302-2-35:2017)(Components)	-	1000	-
(Cl.24 of IS 302-2-35:2017)(Components)	-	1000	-
(Cl.24 of IS 302-2-35:2017)(Components)	-	1000	-
(Cl.24 of IS 302-2-35:2017)(Components)	-	1000	-
(Cl.24 of IS 302-2-35:2017)(Components)	-	1000	-
(Cl.25.8 of IS 302-2-35:2017)(Supply Connection and External Flexible cords)	-	1000	-
(CL.27.5 of IS 302-2-35:2017)(Provision for Earthing)	-	1000	-
Cl.22.34, Cl 22.35 of IS 302-1:2008(Construction : Shaft of operating Knobs )	-	1000	-

31 Oct, 2028

-
Cl. 19.11.4.1 to Cl. 19.11.4.7 (EMI/EMC), Cl. 24, Cl. 32.2, Cl. 15.1.1(IPX7-8), Cl 12 as per IS 302-2-35

3365

EKO PRO ENGINEERS PRIVATE LIMITED (32/41), GHAZIABAD

9179706

IS 17569 (2021)

Insulated Containers for Food Storage — Specification

29000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Manufacture and Workmanship)	-	200	-
5.3(Manufacture and Workmanship)	-	200	-
7.1(Material)	-	200	-
7.1.2(Thickness)	-	500	-
7.1.2.1(Requirements and Tests(Material) – Outer Protective Case and Accessories – Lead)	-	500	-
7.1.2.1(Requirements and Tests(Material) – Outer Protective Case and Accessories – Cadmium)	-	500	-
7.1.2.8(Bisphenol A(BPA))	-	1500	-
7.3(Capacity)	-	200	-
7.4(Heat Retention Capability)	-	500	-
7.5(Cold Retention Capability)	-	500	-
7.6.1(Drop Impact Test)	-	500	-
7.6.2(Pendulum Impact Test)	-	500	-
7.7(Fixing Strength of the Handle)	-	500	-
7.8(Test for Strength of Shoulder Strap)	-	500	-
7.9(Leakage Test)	-	500	-
7.10(Joint Leak Test)	-	500	-
7.11(Staining Test)	-	500	-
7.12("Check for PUF (Polyurethane Foam) or any Other Similar Thermal Insulation Material ")	-	500	-
7.13.1(Length of the Shoulder Strap)	-	500	-
7.13.2(Stability of Insulated Container)	-	500	-
7.13.3(Cleaning)	-	500	-
7.14(Seepage Test)	-	500	-
9.1(Marking)	-	200	-
9.2(BIS certification marking)	-	200	-
10(Packaging)	-	200	-
CLAUSE 5.2(Welding Defects)	-	200	-
CLAUSE 7.1(Materials)	-	200	-
CLAUSE 7.1.2.2(Thickness of plastic)	-	300	-
"CLAUSE 7.1.2.1 "(Minimum Thickness of Outer Container)	-	500	-
"CLAUSE 7.1.2.1 "(Coating Thickness)	-	500	-
"CLAUSE 7.1.2.1 "(Salt Water Corrosion Test)	-	500	-
CLAUSE 7.1.2.1(Adhesion Test)	-	500	-
CLAUSE 7.1.2.1(Lead Limit)	-	800	-
CLAUSE 7.1.2.1(Cadmium Limit)	-	800	-
CLAUSE 7.1.2.3(Outer container or lid - thickness)	-	500	-
CLAUSE 7.3(Capacity)	-	250	-
CLAUSE 7.4(Heat Retention Capability)	-	500	-
CLAUSE 7.5(Cold Retention Capability)	-	500	-
CLAUSE 7.6.1(Drop Impact)	-	500	-
CLAUSE 7.6.2(Pendulum Impact)	-	500	-
CLAUSE 7.7(Fixing Strength of Handle)	-	500	-
CLAUSE 7.8(Test for Strength of Shoulder Strap)	-	500	-
CLAUSE 7.9(Leakage Test)	-	500	-
CLAUSE 7.10(Joint Leak Test)	-	500	-
CLAUSE 7.11(Staining Test)	-	500	-
CLAUSE 7.12(Checking of PUF insulation)	-	500	-
CLAUSE 7.13.1(Length of the Shoulder Strap)	-	500	-
CLAUSE 7.13.2(Stability of Flask)	-	500	-
CLAUSE 7.1.1(Material - inner container)	-	500	-
C 7.1.1 Note Annex C(Test for leaching of food grade stainless steel)	-	500	-
CL 7.1.1 Note- Annex D(Sensational test method)	-	500	-
Cl 7.1.2.2(Polymer - test for BPA)	-	5000	-
Cl 7.1.2.4(Silicon gasket - overall migration)	-	500	-
Cl 7.1.2.4(Silicon gasket - defects)	-	200	-
Cl 7.1.2.5(Performance requirement for glass lid - Fragmentation test (Cl 8.15.1 of IS 2347))	-	200	-
Cl 7.1.2.5(Performance requirement for glass lid - Ball drop test (Cl 8.15.2 of IS 2347))	-	200	-
Cl 7.1.2.5(Performance requirement for glass lid - Thermal shock test (Cl 8.15.3 of IS 2347))	-	200	-
Cl 7.1.2.5(Performance requirement for glass lid - Free fall test (Cl 8.15.4 of IS 2347))	-	200	-
Cl 7.1.2.5(Thickness of steel rim)	-	500	-
Cl 7.1.2.5(Thickness of glass lid)	-	500	-
Cl 7.1.2.6(Thermal insulating material)	-	500	-
Cl 7.1.2.7(Additional lid)	-	300	-
Cl 7.1.2.8(Hot/Cold Box - thickness)	-	300	-
Cl 7.1.2.9(Internal utensils- material)	-	300	-
Cl 7.1.2.9(Internal utensils- thickness)	-	300	-
Cl 7.1.2.9(Internal utensils - thickness of plastic lid)	-	300	-
Cl 7.1.2.9(Test for BPA)	-	300	-
CLAUSE 7.1.2.3(Outer container or lid - material)	-	300	-
5(Manufacture and Workmanship)	-	0	-
5.3(Manufacture and Workmanship)	-	0	-
7.1(Material)	-	0	-
7.1.2(Thickness)	-	0	-
7.1.2.1(Requirements and Tests(Material) – Outer Protective Case and Accessories – Lead)	-	0	-
7.1.2.1(Requirements and Tests(Material) – Outer Protective Case and Accessories – Cadmium)	-	0	-
7.1.2.8(Bisphenol A(BPA))	-	0	-
7.3(Capacity)	-	0	-
7.4(Heat Retention Capability)	-	0	-
7.5(Cold Retention Capability)	-	0	-
7.6.1(Drop Impact Test)	-	0	-
7.6.2(Pendulum Impact Test)	-	0	-
7.7(Fixing Strength of the Handle)	-	0	-
7.8(Test for Strength of Shoulder Strap)	-	0	-
7.9(Leakage Test)	-	0	-
7.10(Joint Leak Test)	-	0	-
7.11(Staining Test)	-	0	-
7.12("Check for PUF (Polyurethane Foam) or any Other Similar Thermal Insulation Material ")	-	0	-
7.13.1(Length of the Shoulder Strap)	-	0	-
7.13.2(Stability of Insulated Container)	-	0	-
7.13.3(Cleaning)	-	0	-
7.14(Seepage Test)	-	0	-
9.1(Marking)	-	0	-
9.2(BIS certification marking)	-	0	-
10(Packaging)	-	0	-
CLAUSE 5.2(Welding Defects)	-	0	-
CLAUSE 7.1(Materials)	-	0	-
CLAUSE 7.1.2.2(Thickness of plastic)	-	0	-
"CLAUSE 7.1.2.1 "(Minimum Thickness of Outer Container)	-	0	-
"CLAUSE 7.1.2.1 "(Coating Thickness)	-	0	-
"CLAUSE 7.1.2.1 "(Salt Water Corrosion Test)	-	0	-
CLAUSE 7.1.2.1(Adhesion Test)	-	0	-
CLAUSE 7.1.2.1(Lead Limit)	-	0	-
CLAUSE 7.1.2.1(Cadmium Limit)	-	0	-
CLAUSE 7.1.2.3(Outer container or lid - thickness)	-	0	-
CLAUSE 7.3(Capacity)	-	0	-
CLAUSE 7.4(Heat Retention Capability)	-	0	-
CLAUSE 7.5(Cold Retention Capability)	-	0	-
CLAUSE 7.6.1(Drop Impact)	-	0	-
CLAUSE 7.6.2(Pendulum Impact)	-	0	-
CLAUSE 7.7(Fixing Strength of Handle)	-	0	-
CLAUSE 7.8(Test for Strength of Shoulder Strap)	-	0	-
CLAUSE 7.9(Leakage Test)	-	0	-
CLAUSE 7.10(Joint Leak Test)	-	0	-
CLAUSE 7.11(Staining Test)	-	0	-
CLAUSE 7.12(Checking of PUF insulation)	-	0	-
CLAUSE 7.13.1(Length of the Shoulder Strap)	-	0	-
CLAUSE 7.13.2(Stability of Flask)	-	0	-
CLAUSE 7.1.1(Material - inner container)	-	0	-
C 7.1.1 Note Annex C(Test for leaching of food grade stainless steel)	-	0	-
CL 7.1.1 Note- Annex D(Sensational test method)	-	0	-
Cl 7.1.2.2(Polymer - test for BPA)	-	0	-
Cl 7.1.2.4(Silicon gasket - overall migration)	-	0	-
Cl 7.1.2.4(Silicon gasket - defects)	-	0	-
Cl 7.1.2.5(Performance requirement for glass lid - Fragmentation test (Cl 8.15.1 of IS 2347))	-	0	-
Cl 7.1.2.5(Performance requirement for glass lid - Ball drop test (Cl 8.15.2 of IS 2347))	-	0	-
Cl 7.1.2.5(Performance requirement for glass lid - Thermal shock test (Cl 8.15.3 of IS 2347))	-	0	-
Cl 7.1.2.5(Performance requirement for glass lid - Free fall test (Cl 8.15.4 of IS 2347))	-	0	-
Cl 7.1.2.5(Thickness of steel rim)	-	0	-
Cl 7.1.2.5(Thickness of glass lid)	-	0	-
Cl 7.1.2.6(Thermal insulating material)	-	0	-
Cl 7.1.2.7(Additional lid)	-	0	-
Cl 7.1.2.8(Hot/Cold Box - thickness)	-	0	-
Cl 7.1.2.9(Internal utensils- material)	-	0	-
Cl 7.1.2.9(Internal utensils- thickness)	-	0	-
Cl 7.1.2.9(Internal utensils - thickness of plastic lid)	-	0	-
Cl 7.1.2.9(Test for BPA)	-	0	-
CLAUSE 7.1.2.3(Outer container or lid - material)	-	0	-
5(Manufacture and Workmanship)	-	-	-
5.3(Manufacture and Workmanship)	-	-	-
7.1(Material)	-	-	-
7.1.2(Thickness)	-	-	-
7.1.2.1(Requirements and Tests(Material) – Outer Protective Case and Accessories – Lead)	-	-	-
7.1.2.1(Requirements and Tests(Material) – Outer Protective Case and Accessories – Cadmium)	-	-	-
7.1.2.8(Bisphenol A(BPA))	-	-	-
7.3(Capacity)	-	-	-
7.4(Heat Retention Capability)	-	-	-
7.5(Cold Retention Capability)	-	-	-
7.6.1(Drop Impact Test)	-	-	-
7.6.2(Pendulum Impact Test)	-	-	-
7.7(Fixing Strength of the Handle)	-	-	-
7.8(Test for Strength of Shoulder Strap)	-	-	-
7.9(Leakage Test)	-	-	-
7.10(Joint Leak Test)	-	-	-
7.11(Staining Test)	-	-	-
7.12("Check for PUF (Polyurethane Foam) or any Other Similar Thermal Insulation Material ")	-	-	-
7.13.1(Length of the Shoulder Strap)	-	-	-
7.13.2(Stability of Insulated Container)	-	-	-
7.13.3(Cleaning)	-	-	-
7.14(Seepage Test)	-	-	-
9.1(Marking)	-	-	-
9.2(BIS certification marking)	-	-	-
10(Packaging)	-	-	-
CLAUSE 5.2(Welding Defects)	-	-	-
CLAUSE 7.1(Materials)	-	-	-
CLAUSE 7.1.2.2(Thickness of plastic)	-	-	-
"CLAUSE 7.1.2.1 "(Minimum Thickness of Outer Container)	-	-	-
"CLAUSE 7.1.2.1 "(Coating Thickness)	-	-	-
"CLAUSE 7.1.2.1 "(Salt Water Corrosion Test)	-	-	-
CLAUSE 7.1.2.1(Adhesion Test)	-	-	-
CLAUSE 7.1.2.1(Lead Limit)	-	-	-
CLAUSE 7.1.2.1(Cadmium Limit)	-	-	-
CLAUSE 7.1.2.3(Outer container or lid - thickness)	-	-	-
CLAUSE 7.3(Capacity)	-	-	-
CLAUSE 7.4(Heat Retention Capability)	-	-	-
CLAUSE 7.5(Cold Retention Capability)	-	-	-
CLAUSE 7.6.1(Drop Impact)	-	-	-
CLAUSE 7.6.2(Pendulum Impact)	-	-	-
CLAUSE 7.7(Fixing Strength of Handle)	-	-	-
CLAUSE 7.8(Test for Strength of Shoulder Strap)	-	-	-
CLAUSE 7.9(Leakage Test)	-	-	-
CLAUSE 7.10(Joint Leak Test)	-	-	-
CLAUSE 7.11(Staining Test)	-	-	-
CLAUSE 7.12(Checking of PUF insulation)	-	-	-
CLAUSE 7.13.1(Length of the Shoulder Strap)	-	-	-
CLAUSE 7.13.2(Stability of Flask)	-	-	-
CLAUSE 7.1.1(Material - inner container)	-	-	-
C 7.1.1 Note Annex C(Test for leaching of food grade stainless steel)	-	-	-
CL 7.1.1 Note- Annex D(Sensational test method)	-	-	-
Cl 7.1.2.2(Polymer - test for BPA)	-	-	-
Cl 7.1.2.4(Silicon gasket - overall migration)	-	-	-
Cl 7.1.2.4(Silicon gasket - defects)	-	-	-
Cl 7.1.2.5(Performance requirement for glass lid - Fragmentation test (Cl 8.15.1 of IS 2347))	-	-	-
Cl 7.1.2.5(Performance requirement for glass lid - Ball drop test (Cl 8.15.2 of IS 2347))	-	-	-
Cl 7.1.2.5(Performance requirement for glass lid - Thermal shock test (Cl 8.15.3 of IS 2347))	-	-	-
Cl 7.1.2.5(Performance requirement for glass lid - Free fall test (Cl 8.15.4 of IS 2347))	-	-	-
Cl 7.1.2.5(Thickness of steel rim)	-	-	-
Cl 7.1.2.5(Thickness of glass lid)	-	-	-
Cl 7.1.2.6(Thermal insulating material)	-	-	-
Cl 7.1.2.7(Additional lid)	-	-	-
Cl 7.1.2.8(Hot/Cold Box - thickness)	-	-	-
Cl 7.1.2.9(Internal utensils- material)	-	-	-
Cl 7.1.2.9(Internal utensils- thickness)	-	-	-
Cl 7.1.2.9(Internal utensils - thickness of plastic lid)	-	-	-
Cl 7.1.2.9(Test for BPA)	-	-	-
CLAUSE 7.1.2.3(Outer container or lid - material)	-	-	-

26 Aug, 2027

-
Included w.e.f.22.07.2025

3366

AADCO TESTING & RESEARCH LABORATORY PVT LTD (F28), GHAZIABAD

8141606

IS 4270 (2001)

Steel tubes used for water wells specification (Third Revision)

ALL GRADES AND SIZES AND TYPES

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6(Tensile Test & Flattening Test)	-	1500	-
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	1500	-
Cl 9(Pipe ends, Angle of bevel & Root Face )	-	500	-
Cl 10(Outer Diameter & Overall Length)	-	500	-
Cl 12(Bituminous Coating & Galvanizing )	-	2000	-
Cl 14(Workmanship)	-	500	-
Cl 6(Tensile Test & Flattening Test)	-	1500	-
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	1500	-
Cl 9(Pipe ends, Angle of bevel & Root Face )	-	500	-
Cl 10(Outer Diameter & Overall Length)	-	500	-
Cl 12(Bituminous Coating & Galvanizing )	-	2000	-
Cl 14(Workmanship)	-	500	-
Cl 6(Tensile Test & Flattening Test)	-	1500	-
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	1500	-
Cl 9(Pipe ends, Angle of bevel & Root Face )	-	500	-
Cl 10(Outer Diameter & Overall Length)	-	500	-
Cl 12(Bituminous Coating & Galvanizing )	-	2000	-
Cl 14(Workmanship)	-	500	-
5.2(phosphorus)	-	500	-
5.2(sulphur)	-	500	-
Cl 14(Workmanship)	-	500	-
Cl 12(Bituminous Coating & Galvanizing )	-	2000	-
Cl 10(Outer Diameter & Overall Length)	-	500	-
Cl 9(Pipe ends, Angle of bevel & Root Face )	-	500	-
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	1500	-
Cl 6(Tensile Test & Flattening Test)	-	1500	-
Cl 6(Tensile Test & Flattening Test)	-	1500	-
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	1500	-
Cl 9(Pipe ends, Angle of bevel & Root Face)	-	500	-
Cl 10(Outer Diameter & Overall Length)	-	500	-
Cl 12(Bituminous Coating & Galvanizing)	-	2000	-
Cl 14(Workmanship)	-	500	-
11.0(Alignment test IS 4270: 2001)	-	500	-
Cl. 8(Hydrostatic test)	-	2500	-

26 Jul, 2027

-
Included w.e.f 13.05.2025

3367

AADCO TESTING & RESEARCH LABORATORY PVT LTD (F28), GHAZIABAD

8141606

IS 3589 (2001)

Steel pipes for water and sewage (168.3 To 2540 Mm Outside Diameter) - Specification (Third Revision)

ALL SIZES AND GRADES

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1 Table 2 Table 3(Carbon Content IS 228)	-	500	-
8.1 Table 2 Table 3(Carbon Content IS 228)	-	500	-
8.1 Table 2 Table 3(Carbon Content IS 228)	-	500	-
8.1 Table 2 Table 3(Manganese Content IS 228)	-	500	-
8.1 Table 2 Table 3(Manganese Content IS 228)	-	500	-
8.1 Table 2 Table 3(Manganese Content IS 228)	-	500	-
8.1 Table 2 Table 3(Phosphorus Content IS 228)	-	500	-
8.1 Table 2 Table 3(Sulphur Content IS 228)	-	500	-
9.3(Guided bend test(For SAW Pipes))	-	1000	-
10(Hydaulic pressure test)	-	2500	-
11.1, Table 5.(Outside Diameter (OD))	-	500	-
11.1, Table 5.(Thickness)	-	500	-
11.1, Table 5.(Mass)	-	500	-
12.3.3(Ovality)	-	500	-
12.5(Strightness)	-	500	-
14.1(Visual inspection, Appearance and Workmanship)	-	500	-
14.2(Visual inspection, Appearance and Workmanship)	-	500	-
14.3(Visual inspection, Appearance and Workmanship)	-	500	-
14.4(Visual inspection, Appearance and Workmanship-Dent Depth(Above 610 mm OD))	-	500	-
14.4(Visual inspection, Appearance and Workmanship-Dent Length)	-	500	-
14.4(Visual inspection, Appearance and Workmanship-Dent Length)	-	500	-
8.1(CE)	-	500	-
8.1(CE)	-	500	-
8.1(CE)	-	500	-
9.3(Guided Bend Test (for SAW Pipes))	-	1000	-
9.2.3(Flattening Test for seamless pipes)	-	1500	-
9.2.1(Flattening test for ERW pipes )	-	1500	-
9.1(Tensile test-Yield Strength)	-	2500	-
9.1(Tensile test-Strength)	-	2500	-
9.1(Tensile test- Elongation)	-	2500	-
18(Marking)	-	500	-
18(Marking)	-	500	-
14.4(Visual inspection, Appearance and Workmanship-Dent Depth(below 610 mm OD))	-	500	-

26 Jul, 2027

-
Included w.e.f 13.05.2025

3368

EKO PRO ENGINEERS PRIVATE LIMITED (32/41), GHAZIABAD

9179706

IS 17526 (2021)

STAINLESS STEEL VACUUM FLASKS - SPECIFICATION

28000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Manufacture and Workmanship)	-	300	-
5.3(Manufacture and Workmanship)	-	300	-
7.1.1(Material- Inner containers)	-	1000	-
7.1.2(Outer protective case and accessories - Thickness)	-	1000	-
7.1.2.1(Coating - Limit of lead)	-	500	-
7.1.2.1(Coating - Limit of Cadmium)	-	500	-
7.1.4(Auxillary closure "Bisphenol A (BPA)")	-	1200	-
7.3(Capacity)	-	200	-
7.4(Heat Retention Capability)	-	1000	-
7.5(Cold Retention Capability)	-	1000	-
7.6.1(Drop Impact Test)	-	1000	-
7.6.2(Pendulum Impact Test)	-	1000	-
7.7(Fixing Strength of the Handle)	-	1000	-
7.8(Test for Strength of Shoulder Strap)	-	1000	-
7.8.1(Test for strength of cord)	-	1000	-
7.9(Leakage Test)	-	1000	-
7.10(Joint Leak Test)	-	1000	-
7.11(Staining Test)	-	1000	-
7.12(Length of the Shoulder Strap)	-	1000	-
7.13(Stability of Flask/Bottle)	-	1000	-
7.14(Pour Test)	-	1000	-
9.1(Marking)	-	200	-
9.2(BIS certification marking)	-	200	-
10(Packaging)	-	200	-
7.1.2(Outer protective case and accessories - Material)	-	1000	-
7.1.2.1(Coating- Thickness test)	-	1000	-
7.1.2.1(Coating- Adhesion test)	-	4000	-
7.1.2.1(Coating- Salt Water corrosion test)	-	500	-
7.2(Arrangement for holding and suspension)	-	500	-
7.15 (Amendment 1)(Endurance test for O-Ring, Washer and Stopper)	-	3500	-
7.1.3(Overall migration)	-	1000	-
7.1.3 (Amendment 1)(O-Ring and washer- Hardness)	-	500	-
7.1.3 (Amendment 1)(O-Ring and washer-- BPA)	-	500	-
7.1.3(Stopper Material)	-	500	-

26 Aug, 2027

-
Included w.e.f.19.05.2025

3369

Robust Testing Solutions Private Limited, Alwar

8173526

IS 7098 : Part 2 (2011)

Crosslinked polyethylene insulated thermoplastic sheathed cables - Specification: Part 2 for working voltages from 3.3 kV up to and including 33 kV (Second Revision)

CROSSLINKED POLYETHYLENE INSULATED THERMOPLASTIC SHEATHED CABLES — SPECIFICATION PART 2 FOR WORKING VOLTAGES FROM 3.3 kV UP TO AND INCLUDING 33 kV

175000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(CONDUCTOR)	-	0	-
4.1.1(CONDUCTOR)	-	0	-
5(INSULATION)	-	0	Complete testing Charge : Rs.1,75,000/- for Single core cable; Rs.2,25,000/- for Three core cable up to 19/33 kV. and Rs.3,90,000/- for Single core cable; Rs.5,90,,000/- for Three core cable for 33/33 kV.
6(SCREENING)	-	0	-
6.1.1(SCREENING : - Non-metallic — Semiconducting Compound)	-	0	-
6.1.2(SCREENING : - Non-magnetic Metallic Tape for Single Core Unscreened and Unarmoured Cables)	-	0	-
7(FILLERS AND INNER SHEATH)	-	0	-
9(OUTER SHEATH )	-	0	-
10.1(CONDUCTOR)	-	0	-
10.2(CONDUCTOR)	-	0	-
11(CONDUCTOR SCREENING)	-	0	-
12.1(INSULATION)	-	0	-
12.2(INSULATION : Thickness of Insulation)	-	2500	-
12.3(INSULATION : Tolerance on Thickness of Insulation)	-	0	-
12.4(Eccentricity and Ovality)	-	2500	-
12.5(INSULATION : Application of Insulation)	-	0	-
13.1(INSULATION SCREENING)	-	0	-
13.2(INSULATION SCREENING)	-	0	-
13.3(INSULATION SCREENING)	-	0	-
13.4(INSULATION SCREENING)	-	0	-
14.1(CORE IDENTIFICATION)	-	22000	Additional Charge, Rs 22000/- for each additional Core
14.1.1(CORE IDENTIFICATION)	-	0	-
15.1(LAVING UP OF CORES)	-	0	-
16.1(INNER SHEATH (COMMON COVERING))	-	0	-
16.2(INNER SHEATH (COMMON COVERING))	-	0	-
16.2.1(INNER SHEATH (COMMON COVERING))	-	0	-
16.3(INNER SHEATH (COMMON COVERING) : Thickness of Inner Sheath)	-	0	-
16.3.1(INNER SHEATH (COMMON COVERING) : Thickness of Inner Sheath)	-	500	-
17.1(ARMOURING : Application )	-	0	-
17.1.1(ARMOURING )	-	0	-
17.1.2(ARMOURING )	-	0	-
17.1.3(ARMOURING )	-	0	-
17.2(ARMOURING : Type of armour )	-	0	-
17.2.1(ARMOURING : Type of armour )	-	0	-
17.2(ARMOURING : Coverage )	-	1500	-
8.1(ARMOURING)	-	0	-
8.2(ARMOURING)	-	0	-
17.3(ARMOURING : Dimension )	-	1500	-
17.4(ARMOURING : Joints)	-	0	-
16.4(ARMOURING : Resistance)	-	3000	-
20.4(Dielectric power factor test : As a function of temperature)	-	5000	-
18.1(OUTER SHEATH)	-	0	-
18.2(OUTER SHEATH: Colour)	-	0	-
18.3(Thicknes of outer sheath : average )	-	500	-
18.3(Thicknes of outer sheath : minimum )	-	0	-
19.1 i) a)(Annealing test (for copper))	-	2500	-
19.1 i) b)(Tensile test (for aluminium) - Before stranding )	-	2500	-
19.1 i) b)(Tensile test (for aluminium) - After stranding )	-	0	-
19.1 i) c)(Wrapping test ( for aluminium))	-	0	-
19.1 i) d)(Resistance test - Main conductor )	-	3000	-
19.1 i) d)(Resistance test - Neutral conductor )	-	0	-
19.1 iii) a)(Phyaical tests for insulation : Tensile Test)	-	1500	-
19.1 iii) a)(Phyaical tests for insulation : Elongation )	-	1000	-
19.1 iii) b)(Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	2500	-
19.1 iii) b)(Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	2500	-
19.1 iii) c)(Degree of cross linking )	-	0	-
19.1 iii) d)(Phyaical tests for insulation : Hot set )	-	3000	-
19.1 iii) d)(Phyaical tests for insulation : Permanent set )	-	0	-
19.1 iii) e)(Phyaical tests for insulation : Shrinkage )	-	2500	-
19.1 iii) e)(Phyaical tests for insulation : Shrinkage - Crack observed )	-	0	-
19.1 iii) f)(Insulation: Waterabsorption(gravimetric))	-	5000	-
19.1 v) a)(Test for strippability of semiconducting strippable insulation screen (when applicable))	-	1000	-
19.1 v) b)(Volume resistivity)	-	4000	-
19.1 vi) a)(Physical tests for outer sheath : Tensile stregth )	-	1000	-
19.1 vi) a)(Physical tests for outer sheath : Elongation )	-	0	-
19.1 vi) b)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	2500	-
19.1 vi) b)(Physical tests for outer sheath -Ageing in air oven : Elongation )	-	2500	-
19.1 vi) b)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	0	-
19.1 vi) b)(Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	0	-
19.1 vi) c)(Phyaical tests for Sheath : Shrinkage )	-	1000	-
19.1 vi) c)(Phyaical tests for Sheath : Shrinkage - Crack observed )	-	0	-
19.1 vi) d)(Sheath : Hot deformation)	-	2000	-
19.1 vi) e)(Loss of massIn air oven)	-	1500	-
19.1 vi) f)(Sheath : Heat shock test)	-	2000	-
19.1 vi) g)(Sheath : Thermalstability)	-	1000	-
19.1 vi) h)(Carbon black content of polythene sheath )	-	3000	-
19.1 vii)(Thermal ageing test for complete cable - Tensile stregth )	-	2500	-
19.1 vii)(Thermal ageing test for complete cable- Elogation )	-	2500	-
19.1 vii)(Thermal ageing test for complete cable- Resistivity )	-	2500	-
19.1 xi)(Insulation resistance test : volume resistivity )	-	3000	-
20.2(Partial discharge test)	-	22000	-
20.3(Bending test)	-	4000	-
20.4(Dielectric power factor test : As a function of voltage)	-	6000	-
20.5(Heating Cycle Test)	-	22000	-
20.6(Impulse withstand test (Rated voltage, kV 3.8/6.6 Impulse voltage, kV 60))	-	22000	Additional charges, if applicable
20.7(High voltage test)	-	12000	-
20.8(Flammability test)	-	3000	-
20.1(Oxygen Index Test)	-	2500	-
20.11(Flame Retardance Test on Single Cables)	-	2000	-
20.12(Flame Retardance Test on Bunched Cables)	-	8000	Additional charges, if applicable
20.13(Test for Halogen Acid Gas Evolution)	-	5000	Additional charges, if applicable
20.14( Test for Smoke Density)	-	4000	Additional charges, if applicable
20.15(Temperature Index)	-	0	Additional charges, if applicable
21.1(IDENTIFICATION : Manufacturer's Identification)	-	0	-
21.2(IDENTIFICATION : Cable Identification)	-	0	-
21.3(IDENTIFICATION : Cable Code)	-	0	-
20.3 (a)(Partial discharge test (Bending test))	-	0	-
20.5 (a)(PD test (heating cycle test))	-	0	-
20.6(Impulse Withstand Test (Rated voltage, kV 6.35/11 Impulse voltage, kV 75))	-	20000	-
20.6(Impulse Withstand Test (Rated voltage, kV 11/11 Impulse voltage, kV 95))	-	20000	-
20.6(Impulse Withstand Test (Rated voltage, kV 12.7/22 Impulse voltage, kV 125))	-	20000	-
20.6(Impulse Withstand Test (Rated voltage, kV 19/33 Impulse voltage, kV 170))	-	20000	-
Cl-20.6(Impulse Withstand Test (Rated voltage, kv 33/33 Impulse voltage , kv 250))	-	20000	-
Cl. 8(Conductor)	-	0	-
Cl. 8(Conductor)	-	0	-
Cl. 8(Conductor)	-	0	-
Cl.8 & 17(Armouring)	-	0	-
Cl. 17.5(Armouring : Resistance of Armour,)	-	0	-
Cl.8 & 17(Armouring : Tensile Strength)	-	0	-
Cl.8 & 17(Armouring : Elongation)	-	0	-
Cl.8 & 17(Armouring : Torsion Test (For Round Steel Wire Only))	-	0	-
Cl.8 & 17(Armouring: Winding Test ( For formed steel wire only))	-	0	-
Cl.8 & 17(Armouring : Application)	-	0	-
Cl.8 & 17(Armouring : Uniformity of Zinc Coating)	-	0	-
Cl.8 & 17(Armouring: Mass of Zinc Coating)	-	0	-
Cl.8 & 17(Armouring : Resistivity Test)	-	0	-
Cl.8 & 17(Armouring: Cold Impact Test (For outer Sheath))	-	0	-
Cl. 13.5.1 and Table 7(Armouring: Resistance Test for Armouring (Other than Mining Cables))	-	0	-

02 Aug, 2026

-
Included w.e.f 17.06.2025

3370

EKO PRO ENGINEERS PRIVATE LIMITED (32/41), GHAZIABAD

9179706

IS 17790 (2022)

INSULATED FLASK FOR DOMESTIC USE SPECIFICATION

29000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Manufacture and Workmanship)	-	500	-
5.3(Welding Defects)	-	500	-
7.1(Material)	-	100	-
7.1.2.1 & 7.1.2.2(Thickness)	-	500	-
7.1.3(Coating Thickness)	-	1000	-
7.1.3(Material – coating cadmium)	-	1000	-
7.1.2.2(Bisphenol A (BPA))	-	1500	-
7.1.4.3(O-Ring / Washer- Defects)	-	500	-
7.2(Capacity)	-	250	-
7.3(Heat Retention Capability)	-	800	-
7.4(Cold Retention Capability)	-	800	-
7.5.1(Drop Impact Test)	-	800	-
7.5.2(Pendulum Impact Test)	-	800	-
7.6(Fixing Strength of the Handle)	-	800	-
7.7(Test for Strength of Shoulder Strap)	-	800	-
7.8(Test for strength of cord)	-	800	-
7.9(Leakage Test)	-	1200	-
7.10(Joint Leak Test)	-	1200	-
7.11(Staining Test)	-	1200	-
7.13(Seepage test)	-	1200	-
7.14(Test for Lever, device for operating Or regulating flow test)	-	1200	-
7.15(Test for length of the shoulder cap)	-	1200	-
7.16(Stability of Flask)	-	1200	-
7.17(Pour Test)	-	1200	-
9.1(Marking)	-	500	-
9.2(BIS certification marking)	-	100	-
10(Packaging)	-	500	-
7.1.3(Coating- Adhesion test)	-	1000	-
7.1.3(Coating - Thickness test)	-	1000	-
7.1.3(Coating- Salt water corrosion test)	-	1000	-
7.1.4.1(Stopper)	-	500	-
7.1.4.2(O-ring/washer- Overall migration)	-	500	-
7.1.4.2(O-ring/washer- Shore hardness)	-	500	-
7.1.4.2(O-ring/washer- BPA)	-	1200	-
7.1.5(Auxillary closure)	-	500	-
7.12(Check for PUF (Polyurethane Foam) or Any Other Similar Thermal Insulation Material)	-	500	-
7.18(Endurance Test for O-Ring, Washer and Stopper)	-	1000	-

26 Aug, 2027

-
Included w.e.f.19.05.2025

3371

Envirocare Labs Pvt Ltd, Thane

7120616

IS 14543 (2024)

Packaged Drinking Water Other than Packaged Natural Mineral Water Specification Third Revision

17000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	500	-
Cl-5.2.2(Coliform)	-	400	-
Cl-5.2.3(Staphylococcus aureus)	-	400	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	750	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	750	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	650	-
5.2.6(Aerobic Microbial Count @ 20 to 22 deg C)	-	650	-
Cl-5.2.7(Yeast and mould)	-	400	-
Cl-5.2.8(Salmonella)	-	750	-
Cl-5.2.8(shigella)	-	750	-
Cl-5.2.9(Vibrio cholera)	-	1000	-
Cl-5.2.9(V.parahaemolyticus)	-	1000	-
Cl-5.2.3(Faecal streptococci)	-	400	-
5.3/Table 2/xiii(Suphate)	-	350	-
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	100	-
Cl-5.3, Table-1 (ii)(Odour)	-	100	-
Cl-5.3, Table-1 (iii)(Taste)	-	100	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	150	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	300	-
Cl-5.3, Table-1 (vi)(pH)	-	150	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	500	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	350	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	350	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	450	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	700	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	700	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	1200	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	500	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	450	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	500	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	200	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	500	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	300	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	200	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	350	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	350	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	200	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	750	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	100	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	500	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	500	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	450	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	750	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	500	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	500	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	500	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	500	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	500	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	500	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	2000	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	1500	-
Table 3, x)(Uranium)	-	750	-
Cl-5.4 (ii)(Total pesticide residue)	-	6000	-
5.4/Annex D/i(P,P-DDT)	-	0	-
5.4/Annex D/ii(Lindane)	-	0	-
5.4/Annex D/iv(b-Endosulfan)	-	0	-
5.4/Annex D/xvi(Dieldrin)	-	0	-
5.4/Annex D/xvi(Aldrin)	-	0	-
5.4/Annex D/xv(Malathion)	-	0	-
5.4/Annex D/xiv(Methyl parathion)	-	0	-
5.4/Annex D/xiii(Atrazine)	-	0	-
5.4/Annex D/xii(Alachlor)	-	0	-
5.4 i)(Isoproturon)	-	0	-
5.4/Annex D/x(Butachlor)	-	0	-
5.4/Annex D/ix(2,4 –D)	-	0	-
5.4/Annex D/viii(Phorate)	-	0	-
5.4/Annex D/vii(Chlorpyrifos)	-	0	-
5.4/Annex D/vi(Ethion)	-	0	-
5.4 i)(Monocrotophos)	-	0	-
5.4/Annex D/iv(a-Endosulfan)	-	0	-
5.4/Annex D/iv(Endosulfan sulfate)	-	0	-
5.4/Annex D/iii(d-HCH)	-	0	-
5.4/Annex D/iii(a-HCH)	-	0	-
5.4/Annex D/iii(β- HCH)	-	0	-
5.4/Annex D/i(O,P-DDT)	-	0	-
5.4/Annex D/i(O,P-DDD)	-	0	-
5.4/Annex D/i(P,P-DDE)	-	0	-
5.4/Annex D/i(O,P-DDE)	-	0	-
5.4/Annex D/i(P,P-DDD)	-	0	-
5.3(Appearance)	-	0	-
5.4/Annex D/v(Monochrotophos)	-	0	-
5.4/Annex D/viii(Phorate sulphoxide)	-	0	-
5.4/Annex D/viii(Phorate sulfone)	-	0	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	500	-
Cl-5.3, Table-3 (x)(Uranium)	-	0	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	0	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	175	-
Cl-5.1(General Requirements)	-	0	-
5.4/Annex D/xi(Isoproturon)	-	0	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	0	-
5.4/Annex D/xxviii(Malaoxon)	-	0	-
Cl-5.4 (i)(Pesticide residues considered individually)	-	0	-
5.4 i)(p,p DDD)	-	0	-
5.4 i)(o,p DDD)	-	0	-
5.4 i)(p,p DDE)	-	0	-
5.4, i)(o,p DDE)	-	0	-
5.4 i)(p,p DDT)	-	0	-
5.4 i)(o,p DDT)	-	0	-
5.4 i)(Dieldrin)	-	0	-
5.4 i)(Aldrin)	-	0	-
5.4 i)(Malathion)	-	0	-
5.4, i)("oxygen analogue of Malathion (Malaoxon)")	-	0	-
5.4 i)(Methyl Paraoxon)	-	0	-
5.4 i)(Methyl Parathion)	-	0	-
5.4 i)(Atrazine)	-	0	-
5.4 i)(Alachlor)	-	0	-
5.4 i)(Butachlor)	-	0	-
5.4 i)(2,4-D)	-	0	-
5.4 i)(Phorate sulphone)	-	0	-
5.4 i)(Phorate sulphoxide)	-	0	-
5.4 i)(Phorate)	-	0	-
5.4 i)(Chlorpyrifos)	-	0	-
5.4 i)(Ethion)	-	0	-
5.4 i)(Endosulfan Sulphate)	-	0	-
5.4 i)(beta-Endosulfan)	-	0	-
5.4 i)(alpha-Endosulfan)	-	0	-
5.4 i)(Delta-HCH)	-	0	-
5.4 i)(beta-HCH)	-	0	-
5.4 i)(alpha-HCH)	-	0	-
5.4 i)(Gamma-HCH (Lindane))	-	0	-
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	0	-
Cl-5.2.2(Coliform)	-	0	-
Cl-5.2.3(Staphylococcus aureus)	-	0	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	0	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	0	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	0	-
5.2.6(Aerobic Microbial Count @ 20 to 22 deg C)	-	0	-
Cl-5.2.7(Yeast and mould)	-	0	-
Cl-5.2.8(Salmonella)	-	0	-
Cl-5.2.8(shigella)	-	0	-
Cl-5.2.9(Vibrio cholera)	-	0	-
Cl-5.2.9(V.parahaemolyticus)	-	0	-
Cl-5.2.3(Faecal streptococci)	-	0	-
5.3/Table 2/xiii(Suphate)	-	0	-
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	0	-
Cl-5.3, Table-1 (ii)(Odour)	-	0	-
Cl-5.3, Table-1 (iii)(Taste)	-	0	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	0	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	0	-
Cl-5.3, Table-1 (vi)(pH)	-	0	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	0	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	0	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	0	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	0	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	0	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	0	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	0	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	0	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	0	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	0	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	0	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	0	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	0	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	0	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	0	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	0	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	0	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	0	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	0	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	0	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	0	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	0	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	0	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	0	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	0	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	0	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	0	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	0	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	0	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	0	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	0	-
Table 3, x)(Uranium)	-	0	-
Cl-5.4 (ii)(Total pesticide residue)	-	0	-
5.4/Annex D/i(P,P-DDT)	-	0	-
5.4/Annex D/ii(Lindane)	-	0	-
5.4/Annex D/iv(b-Endosulfan)	-	0	-
5.4/Annex D/xvi(Dieldrin)	-	0	-
5.4/Annex D/xvi(Aldrin)	-	0	-
5.4/Annex D/xv(Malathion)	-	0	-
5.4/Annex D/xiv(Methyl parathion)	-	0	-
5.4/Annex D/xiii(Atrazine)	-	0	-
5.4/Annex D/xii(Alachlor)	-	0	-
5.4 i)(Isoproturon)	-	0	-
5.4/Annex D/x(Butachlor)	-	0	-
5.4/Annex D/ix(2,4 –D)	-	0	-
5.4/Annex D/viii(Phorate)	-	0	-
5.4/Annex D/vii(Chlorpyrifos)	-	0	-
5.4/Annex D/vi(Ethion)	-	0	-
5.4 i)(Monocrotophos)	-	0	-
5.4/Annex D/iv(a-Endosulfan)	-	0	-
5.4/Annex D/iv(Endosulfan sulfate)	-	0	-
5.4/Annex D/iii(d-HCH)	-	0	-
5.4/Annex D/iii(a-HCH)	-	0	-
5.4/Annex D/iii(β- HCH)	-	0	-
5.4/Annex D/i(O,P-DDT)	-	0	-
5.4/Annex D/i(O,P-DDD)	-	0	-
5.4/Annex D/i(P,P-DDE)	-	0	-
5.4/Annex D/i(O,P-DDE)	-	0	-
5.4/Annex D/i(P,P-DDD)	-	0	-
5.3(Appearance)	-	0	-
5.4/Annex D/v(Monochrotophos)	-	0	-
5.4/Annex D/viii(Phorate sulphoxide)	-	0	-
5.4/Annex D/viii(Phorate sulfone)	-	0	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	0	-
Cl-5.3, Table-3 (x)(Uranium)	-	0	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	0	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	0	-
Cl-5.1(General Requirements)	-	0	-
5.4/Annex D/xi(Isoproturon)	-	0	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	0	-
5.4/Annex D/xxviii(Malaoxon)	-	0	-
Cl-5.4 (i)(Pesticide residues considered individually)	-	0	-
5.4 i)(p,p DDD)	-	0	-
5.4 i)(o,p DDD)	-	0	-
5.4 i)(p,p DDE)	-	0	-
5.4, i)(o,p DDE)	-	0	-
5.4 i)(p,p DDT)	-	0	-
5.4 i)(o,p DDT)	-	0	-
5.4 i)(Dieldrin)	-	0	-
5.4 i)(Aldrin)	-	0	-
5.4 i)(Malathion)	-	0	-
5.4, i)("oxygen analogue of Malathion (Malaoxon)")	-	0	-
5.4 i)(Methyl Paraoxon)	-	0	-
5.4 i)(Methyl Parathion)	-	0	-
5.4 i)(Atrazine)	-	0	-
5.4 i)(Alachlor)	-	0	-
5.4 i)(Butachlor)	-	0	-
5.4 i)(2,4-D)	-	0	-
5.4 i)(Phorate sulphone)	-	0	-
5.4 i)(Phorate sulphoxide)	-	0	-
5.4 i)(Phorate)	-	0	-
5.4 i)(Chlorpyrifos)	-	0	-
5.4 i)(Ethion)	-	0	-
5.4 i)(Endosulfan Sulphate)	-	0	-
5.4 i)(beta-Endosulfan)	-	0	-
5.4 i)(alpha-Endosulfan)	-	0	-
5.4 i)(Delta-HCH)	-	0	-
5.4 i)(beta-HCH)	-	0	-
5.4 i)(alpha-HCH)	-	0	-
5.4 i)(Gamma-HCH (Lindane))	-	0	-
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	0	-
Cl-5.2.2(Coliform)	-	0	-
Cl-5.2.3(Staphylococcus aureus)	-	0	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	0	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	0	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	0	-
5.2.6(Aerobic Microbial Count @ 20 to 22 deg C)	-	0	-
Cl-5.2.7(Yeast and mould)	-	0	-
Cl-5.2.8(Salmonella)	-	0	-
Cl-5.2.8(shigella)	-	0	-
Cl-5.2.9(Vibrio cholera)	-	0	-
Cl-5.2.9(V.parahaemolyticus)	-	0	-
Cl-5.2.3(Faecal streptococci)	-	0	-
5.3/Table 2/xiii(Suphate)	-	0	-
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	0	-
Cl-5.3, Table-1 (ii)(Odour)	-	0	-
Cl-5.3, Table-1 (iii)(Taste)	-	0	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	0	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	0	-
Cl-5.3, Table-1 (vi)(pH)	-	0	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	0	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	0	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	0	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	0	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	0	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	0	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	0	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	0	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	0	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	0	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	0	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	0	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	0	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	0	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	0	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	0	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	0	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	0	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	0	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	0	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	0	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	0	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	0	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	0	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	0	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	0	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	0	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	0	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	0	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	0	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	0	-
Table 3, x)(Uranium)	-	0	-
Cl-5.4 (ii)(Total pesticide residue)	-	0	-
5.4/Annex D/i(P,P-DDT)	-	0	-
5.4/Annex D/ii(Lindane)	-	0	-
5.4/Annex D/iv(b-Endosulfan)	-	0	-
5.4/Annex D/xvi(Dieldrin)	-	0	-
5.4/Annex D/xvi(Aldrin)	-	0	-
5.4/Annex D/xv(Malathion)	-	0	-
5.4/Annex D/xiv(Methyl parathion)	-	0	-
5.4/Annex D/xiii(Atrazine)	-	0	-
5.4/Annex D/xii(Alachlor)	-	0	-
5.4 i)(Isoproturon)	-	0	-
5.4/Annex D/x(Butachlor)	-	0	-
5.4/Annex D/ix(2,4 –D)	-	0	-
5.4/Annex D/viii(Phorate)	-	0	-
5.4/Annex D/vii(Chlorpyrifos)	-	0	-
5.4/Annex D/vi(Ethion)	-	0	-
5.4 i)(Monocrotophos)	-	0	-
5.4/Annex D/iv(a-Endosulfan)	-	0	-
5.4/Annex D/iv(Endosulfan sulfate)	-	0	-
5.4/Annex D/iii(d-HCH)	-	0	-
5.4/Annex D/iii(a-HCH)	-	0	-
5.4/Annex D/iii(β- HCH)	-	0	-
5.4/Annex D/i(O,P-DDT)	-	0	-
5.4/Annex D/i(O,P-DDD)	-	0	-
5.4/Annex D/i(P,P-DDE)	-	0	-
5.4/Annex D/i(O,P-DDE)	-	0	-
5.4/Annex D/i(P,P-DDD)	-	0	-
5.3(Appearance)	-	0	-
5.4/Annex D/v(Monochrotophos)	-	0	-
5.4/Annex D/viii(Phorate sulphoxide)	-	0	-
5.4/Annex D/viii(Phorate sulfone)	-	0	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	0	-
Cl-5.3, Table-3 (x)(Uranium)	-	0	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	0	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	0	-
Cl-5.1(General Requirements)	-	0	-
5.4/Annex D/xi(Isoproturon)	-	0	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	0	-
5.4/Annex D/xxviii(Malaoxon)	-	0	-
Cl-5.4 (i)(Pesticide residues considered individually)	-	0	-
5.4 i)(p,p DDD)	-	0	-
5.4 i)(o,p DDD)	-	0	-
5.4 i)(p,p DDE)	-	0	-
5.4, i)(o,p DDE)	-	0	-
5.4 i)(p,p DDT)	-	0	-
5.4 i)(o,p DDT)	-	0	-
5.4 i)(Dieldrin)	-	0	-
5.4 i)(Aldrin)	-	0	-
5.4 i)(Malathion)	-	0	-
5.4, i)("oxygen analogue of Malathion (Malaoxon)")	-	0	-
5.4 i)(Methyl Paraoxon)	-	0	-
5.4 i)(Methyl Parathion)	-	0	-
5.4 i)(Atrazine)	-	0	-
5.4 i)(Alachlor)	-	0	-
5.4 i)(Butachlor)	-	0	-
5.4 i)(2,4-D)	-	0	-
5.4 i)(Phorate sulphone)	-	0	-
5.4 i)(Phorate sulphoxide)	-	0	-
5.4 i)(Phorate)	-	0	-
5.4 i)(Chlorpyrifos)	-	0	-
5.4 i)(Ethion)	-	0	-
5.4 i)(Endosulfan Sulphate)	-	0	-
5.4 i)(beta-Endosulfan)	-	0	-
5.4 i)(alpha-Endosulfan)	-	0	-
5.4 i)(Delta-HCH)	-	0	-
5.4 i)(beta-HCH)	-	0	-
5.4 i)(alpha-HCH)	-	0	-
5.4 i)(Gamma-HCH (Lindane))	-	0	-
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	0	-
Cl-5.2.2(Coliform)	-	0	-
Cl-5.2.3(Staphylococcus aureus)	-	0	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	0	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	0	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	0	-
5.2.6(Aerobic Microbial Count @ 20 to 22 deg C)	-	0	-
Cl-5.2.7(Yeast and mould)	-	0	-
Cl-5.2.8(Salmonella)	-	0	-
Cl-5.2.8(shigella)	-	0	-
Cl-5.2.9(Vibrio cholera)	-	0	-
Cl-5.2.9(V.parahaemolyticus)	-	0	-
Cl-5.2.3(Faecal streptococci)	-	0	-
5.3/Table 2/xiii(Suphate)	-	0	-
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	0	-
Cl-5.3, Table-1 (ii)(Odour)	-	0	-
Cl-5.3, Table-1 (iii)(Taste)	-	0	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	0	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	0	-
Cl-5.3, Table-1 (vi)(pH)	-	0	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	0	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	0	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	0	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	0	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	0	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	0	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	0	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	0	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	0	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	0	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	0	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	0	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	0	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	0	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	0	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	0	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	0	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	0	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	0	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	0	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	0	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	0	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	0	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	0	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	0	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	0	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	0	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	0	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	0	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	0	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	0	-
Table 3, x)(Uranium)	-	0	-
Cl-5.4 (ii)(Total pesticide residue)	-	0	-
5.4/Annex D/i(P,P-DDT)	-	0	-
5.4/Annex D/ii(Lindane)	-	0	-
5.4/Annex D/iv(b-Endosulfan)	-	0	-
5.4/Annex D/xvi(Dieldrin)	-	0	-
5.4/Annex D/xvi(Aldrin)	-	0	-
5.4/Annex D/xv(Malathion)	-	0	-
5.4/Annex D/xiv(Methyl parathion)	-	0	-
5.4/Annex D/xiii(Atrazine)	-	0	-
5.4/Annex D/xii(Alachlor)	-	0	-
5.4 i)(Isoproturon)	-	0	-
5.4/Annex D/x(Butachlor)	-	0	-
5.4/Annex D/ix(2,4 –D)	-	0	-
5.4/Annex D/viii(Phorate)	-	0	-
5.4/Annex D/vii(Chlorpyrifos)	-	0	-
5.4/Annex D/vi(Ethion)	-	0	-
5.4 i)(Monocrotophos)	-	0	-
5.4/Annex D/iv(a-Endosulfan)	-	0	-
5.4/Annex D/iv(Endosulfan sulfate)	-	0	-
5.4/Annex D/iii(d-HCH)	-	0	-
5.4/Annex D/iii(a-HCH)	-	0	-
5.4/Annex D/iii(β- HCH)	-	0	-
5.4/Annex D/i(O,P-DDT)	-	0	-
5.4/Annex D/i(O,P-DDD)	-	0	-
5.4/Annex D/i(P,P-DDE)	-	0	-
5.4/Annex D/i(O,P-DDE)	-	0	-
5.4/Annex D/i(P,P-DDD)	-	0	-
5.3(Appearance)	-	0	-
5.4/Annex D/v(Monochrotophos)	-	0	-
5.4/Annex D/viii(Phorate sulphoxide)	-	0	-
5.4/Annex D/viii(Phorate sulfone)	-	0	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	0	-
Cl-5.3, Table-3 (x)(Uranium)	-	0	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	0	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	0	-
Cl-5.1(General Requirements)	-	0	-
5.4/Annex D/xi(Isoproturon)	-	0	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	0	-
5.4/Annex D/xxviii(Malaoxon)	-	0	-
Cl-5.4 (i)(Pesticide residues considered individually)	-	0	-
5.4 i)(p,p DDD)	-	0	-
5.4 i)(o,p DDD)	-	0	-
5.4 i)(p,p DDE)	-	0	-
5.4, i)(o,p DDE)	-	0	-
5.4 i)(p,p DDT)	-	0	-
5.4 i)(o,p DDT)	-	0	-
5.4 i)(Dieldrin)	-	0	-
5.4 i)(Aldrin)	-	0	-
5.4 i)(Malathion)	-	0	-
5.4, i)("oxygen analogue of Malathion (Malaoxon)")	-	0	-
5.4 i)(Methyl Paraoxon)	-	0	-
5.4 i)(Methyl Parathion)	-	0	-
5.4 i)(Atrazine)	-	0	-
5.4 i)(Alachlor)	-	0	-
5.4 i)(Butachlor)	-	0	-
5.4 i)(2,4-D)	-	0	-
5.4 i)(Phorate sulphone)	-	0	-
5.4 i)(Phorate sulphoxide)	-	0	-
5.4 i)(Phorate)	-	0	-
5.4 i)(Chlorpyrifos)	-	0	-
5.4 i)(Ethion)	-	0	-
5.4 i)(Endosulfan Sulphate)	-	0	-
5.4 i)(beta-Endosulfan)	-	0	-
5.4 i)(alpha-Endosulfan)	-	0	-
5.4 i)(Delta-HCH)	-	0	-
5.4 i)(beta-HCH)	-	0	-
5.4 i)(alpha-HCH)	-	0	-
5.4 i)(Gamma-HCH (Lindane))	-	0	-

25 May, 2027

-
Exclusion: Cl.5.3 Table-4 (i) Alpha Emitters, Cl.5.3 Table-4 (ii) (Beta Emitters)

3372

Global Scientific Solution (P) Ltd.

8189526

IS 4250 (2025)

Electric Food-Mixers (Liquidizers and Grinders) and Centrifugal Juicers ï¿½ Specification ( Second Revision )

Covers electric motor-driven food-mixers (grinders and liquidizers) and centrifugal juicers intended for household and similar use and designed for operation at voltages not exceeding 250 V a.c.

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	1000	-
Cl-5(General Conditions for the tests)	-	1000	-
Cl-6(Classification)	-	1000	-
Cl-7(Marking)	-	1000	-
Cl-8(Safety Requirements)	-	15000	-
Cl-9(Endurance fpr motor and base assembly)	-	2000	-
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	2000	-
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	2000	-
Cl-10.5(Operational Tests for Juicers)	-	2000	-
Cl-11(Temperature Withstand Test for Bowl)	-	1000	-
Cl-12.1(Test for Switches)	-	1000	-
Cl-13(Strength of Assembly)	-	1000	-
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	1000	-
Cl-14.2, Table-2 (ii)(Power input and current)	-	1000	-
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	2000	-
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	2000	-
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	2000	-
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	1000	-
Cl-19.11.4.1(Electrostatic discharges)	-	0	-
Cl-19.11.4.2(Radiated fields)	-	0	-
Cl-19.11.4.3(Fast transient bursts)	-	0	-
Cl-19.11.4.4(Surge immunity test)	-	0	-
Cl-19.11.4.5(Immunity to conducted discharges)	-	0	-
Cl-19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
Cl-19.11.4.7(Harmonics)	-	0	-
Cl-10.4(Idli Batter)	-	1000	-

31 Oct, 2028

-
Cl. 19.11.4.1 to Cl. 19.11.4.7 (EMI/EMC), Cl. 24, Cl. 32.2, Cl. 15.1.1(IPX7-8), Cl 12 as per IS 302-2-14

3373

Sleen India Biz venture Private Limited, Agra

9139736

IS 17399 (2020)

Textiles - Polypropylene ( PP )/ High Density Polyethylene ( HDPE ) Laminated Woven Sacks for Mail Sorting, Storage, Transport and Distribution - Specification

Type-I/Type-II/Type-III

32820 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(MANUFACTURE - Raw Materials)	-	2500	-
5.2(MANUFACTURE - Fabric for PP tapes & for HDPE tapes)	-	1800	-
5.2- Table 1- i)("REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm")	-	1500	-
5.2- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	250	-
5.2- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	250	-
5.2- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	500	-
5.2- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf) a) Lengthwise b) Widthwise)	-	3000	-
5.2- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min, N2), (kgf))	-	1500	-
5.2- Table 1- vii)("REQUIREMENTS - Elongation at break of fabric, percent: a) Lengthwise b) Widthwise")	-	0	-
5.2- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	1500	-
5.3(Lamination)	-	1500	-
5.4(Sack Fabrication)	-	500	-
5.5(Capacity)	-	500	-
6.1- Table 1- i)(REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm)	-	0	-
6.1- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	0	-
6.1- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	0	-
6.1- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	0	-
6.1- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf))	-	0	-
6.1- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min)	-	0	-
6.1- Table 1- vii)(REQUIREMENTS - Elongation at break of fabric, percent a) Lengthwise b) Widthwise)	-	0	-
6.1- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	0	-
6.4(UV Resistance Test)	-	16520	-
7(PRINTING, PACKAGING AND MARKING)	-	500	-
8(ATMOSPHERIC CONDITIONS FOR SAMPLE CONDITIONING AND TESTING)	-	500	-
Clause 5.1(Raw Materials)	-	0	-
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	0	-
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	0	-
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	0	-
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	0	-
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	0	-
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	0	-
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	0	-
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	0	-
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	0	-
Clause 5.3(Lamination with a thin film of polypropylene)	-	0	-
Clause 5.4(Sack Fabrication)	-	0	-
Clause 7.3(Marking on Sacks)	-	0	-
Clause 5.1(Raw Materials)	-	0	-
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	0	-
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	0	-
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	0	-
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	0	-
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	0	-
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	0	-
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	0	-
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	0	-
Clause 5.3(Lamination with a thin film of polypropylene)	-	0	-
Clause 7.3(Marking on Sacks)	-	0	-

15 May, 2027

-
Included w.e.f.19.05.2025

3374

KSA LABS LLP, Vadodara

7186606

IS 16703 (2017)

Textiles - High density polyethylene (HDPE) polypropylene (PP) woven sacks for packaging of 25 kg polymer materials - Specification

All

29000 View breakup
-

Clause No.	Exclusion	Remark
5.1(Mass of Bale)	-	-
5.2 Table 1(Dimensions)	-	-
5.2 Table 1(Dimensions)	-	-
5.2 Table 1(Dimensions)	-	-
5.2 Table 1(Dimensions)	-	-
5.2 Table 1(Ends per dm)	-	-
5.2 Table 1(Picks per dm)	-	-
5.2 Table 1(Mass of sack, Gusseted type, g - IS 1964)	-	-
5.2 Table 1(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N) (kgf): - IS 1969 (Part 1))	-	-
5.2 Table 1(Breaking strength of bottom seam (Ravelled strip method), Min, N) (kgf) - IS 9030)	-	-
5.2 Table 1(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N2) (kgf): - IS 1969 (Part 1))	-	-
5.2 Table 1(Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-	-
5.2 Table 1(Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-	-
5.2 Table 1(Drop impact strength)	-	-
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,a) For UV stabilized sacks)	-	-
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,b) For non- UV stabilized sacks)	-	-
4.6(Capacity)	-	-
4.3.1(Bottom Seam)	-	-
4.3(Sacks)	-	-
4.2,5.1,5.2,5.3,5.4(Breaking strenght after U.V. Exposure (Warp/Weft))	-	-
4.2,5.1,5.2,5.3,5.4,(UV Resistance (192 hrs)(100 x 65+92x40))	-	-
4.2(Linear Density)	-	-
4.2(Width of tape)	-	-
Cl-4.4(Lamination Mass)	-	-
Cl-4.5(Liner- Thickness)	-	-
Cl-4.2 (Amendment No-2)(un-laminated fabric mass)	-	-
Cl-4.5(Liner- Width)	-	-
Cl-4.5(Liner- Visible defects)	-	-

24 Jun, 2028

-
-

3375

Global Scientific Solution (P) Ltd.

8189526

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

Rated voltage being not more than 250 V for single phase appliances and 480V for other appliances including direct current (DC) supplied appliances and battery-operated appliances.

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12(Charging of metal-ion batteries)	-	2000	-
6(Classification- IS 302-1)	-	1000	-
5(General conditions for the tests)	-	1000	-
19.11.4.7(Harmonics)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
11.8(Temperature rise)	-	1000	-
11.7(Duration corresponding)	-	1000	-
11.6(Combined appliances)	-	1000	-
11.5(Motor-operated appliances)	-	1000	-
11.4(Heating appliances)	-	1000	-
8.1.5(Live parts of built-in appliances)	-	1000	-
18(Endurance)	-	3000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
16(Leakage current and electric strength)	-	2000	-
4(General requirement)	-	1000	-
32.1(Radiation Toxicity and Similar Hazards)	-	1000	-
31(Resistance to Rusting)	-	1000	-
30.2(Needle Flame Test)	-	1000	-
30.2(Glow Wire Test)	-	2000	-
30.1(Ball pressure test)	-	1000	-
29(clearance, creepage distances and solid insulation)	-	1000	-
28(Screw test and connections)	-	1000	-
27.1(Provision for Earthing, IS 302-1)	-	1000	-
26(Terminals for external conductors)	-	1000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
24(Components)	-	1000	-
23.1(Internal Wiring, IS 302-1)	-	1000	-
22.1(Construction, IS 302-1)	-	1000	-
21.1(Mechanical Strength, IS 302-1)	-	1000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
19(Abnormal Operation)	-	2000	-
18(Endurance)	-	3000	-
17(Over Load Protection of Transformers and associated circuits)	-	1000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	2000	-
16.2(Leakage Current (after Clause 15))	-	2000	-
16.1(General)	-	1000	-
16.0(General)	-	1000	-
15.3(Humidity Test)	-	2000	-
15.2(Spillage Test)	-	2000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	2000	-
15.0(Moisture resistance)	-	2000	-
14(Transient Over Voltages)	-	1000	-
13.3(Electric Strength at operating temperature)	-	1000	-
13.2(Leakage current at operating temperature)	-	1000	-
13(Leakage current and electric strength at operating temperature)	-	1000	-
11.3(Heating)	-	1000	-
11.2(General)	-	1000	-
11.1(General)	-	1000	-
10.2(Current input)	-	1000	-
10.1(Power input)	-	1000	-
9(Starting of motor operation test requirements and tests)	-	1000	-
8.1.4(Protection against live parts against protective impedance)	-	1000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	1000	-
8.1.2(Protection against live parts in openings)	-	1000	-
8.1.1(Protection against live parts in all positions)	-	1000	-
7(Marking and instructions)	-	1000	-
A.2(Earth continuity test)	-	1000	-
Annex C(Ageing test on motors)	-	2000	-
Annex D(Thermal motor protectors)	-	2000	-
15.2(Moisture resistance)	-	2000	-
19.17(Abnormal Operation, IS 302-1)	-	1000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
21.2(Mechanical Strength, IS 302-1)	-	1000	-
21.3(Mechanical Strength, IS 302-1)	-	1000	-
22.5(Construction)	-	1000	-
22.6(Construction, IS 302-1)	-	1000	-
22.11(Construction, IS 302-1)	-	1000	-
22.16(Construction)	-	1000	-
22.32(Construction, IS 302-1)	-	1000	-
22.42(Construction)	-	1000	-
23.3(Internal Wiring, IS 302-1)	-	1000	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	1000	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26.5(Terminals for external conductors)	-	1000	-
27.5(Provision for Earthing, IS 302-1)	-	1000	-
28.1(Screws and connections)	-	1000	-
22.2(Construction, IS 302-1)	-	1000	-
22.3(Construction, IS 302-1)	-	1000	-
B.22.4(Construction, IS 302-1)	-	1000	-
B.22.5(Construction, IS 302-1)	-	1000	-

31 Oct, 2028

-
Cl. 19.11.4.1 to Cl. 19.11.4.7 (EMI/EMC), Cl. 24, Cl. 32.2, Cl. 15.1.1(IPX7-8), Cl 12 "Domestic Electric Clothes Washing Machines (For testing charges please refer part 2 standard in LIMS)"

3376

FOOTWEAR DESIGN AND DEVELOPMENT INSTITUTE (FDDI), NOIDA

8112814

IS 15298 : part 4 (2024)

Personal Protective Equipment Part 4 Occupational Footwear (ISO 20347 : 2021, MOD) (Third Revision)

16500 View breakup
-

Clause No.	Exclusion	Remark
Cl 5.2(Design)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.2.2(" Height of upper ")	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.2.3(Heel area)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.3.1.1(Construction of whole footwear)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.3.1.2(Upper/outsole bond strength)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.3.2(Leak proofness)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.3.3(Specific ergonomic features)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.3.4.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.3.5, Table no 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.3.5, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.3.5, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.3.5, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.3.5, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.3.5, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.3.5, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.3.5, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.3.5, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.3.5, Table no 1 of IS 17011 (x)(pH)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.3.5, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.3.5, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.3.6(Seam strength)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.3.7(Lead Content ( National Annex A))	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.4.2(Thickness)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.4.3(Tear strength)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.4.4, Table 9(Tensile properties- Tensile strength)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.4.4, Table 9(Tensile properties- Breaking Force)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.4.4, Table 9(Tensile properties-Modulus at 100 % elongation)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.4.4, Table 9(Tensile properties- Elongation at break)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.4.5(Flexing resistance)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.4.6(Water vapour permeability and coefficient)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.4.7(Resistance to hydrolysis)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.5.2(Lining- Tear strength)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.5.3(Lining- Abrasion resistance)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.6.2(Tear strength of tongue)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.7.2(Water permeability of insock)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.8.2.1(Thickness of Outsole)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.8.2.2(Cleated area)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.8.2.3(Cleat height)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.8.3(Outsole- Tear strength)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.8.4(Outsole- Abrasion resistance)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.8.5(Outsole-Flexing resistance)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.8.7(Interlayer bond strength)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.2.1.1.4(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.2.1.2(Construction of perforation resistant insert)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.2.1.4.2.1(ISO 20344:2021, 5.11.2)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.2.1.4.2.2(ISO 20344:2021, 5.6.2.1)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.2.3.1(Heat insulation of outsole complex)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.2.3.2(Cold insulation of outsole complex)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.2.4(Energy absorption of seat region)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.2.5(Water resistance)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.2.6(Ankle protection)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.2.7.1(Cut resistance footwear- design)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.2.7.2(Dimensions and construction of protective area of Cut resistance footwear)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.2.7.3(Resistance to cutting)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.2.8(Scuff cap)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.2.9("Slip resistance on ceramic tile floor with glycerine ")	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.3(Upper — Water penetration and absorption)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.4.1(Resistance to hot contact - Outsole)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.4.3.2(Design of Ladder grip)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.4.3.4(Heel breast of Ladder grip)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 7("Marking ")	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.

31 May, 2028

-
Included w.e.f.18.06.2025

3377

Pulp and Paper Research Institute (PAPRI), Rayagada

5169006

IS 3303 (2024)

MATCH PAPER FOR MATCH BOX ï¿½ SPECIFICATION ( Third Revision )

Match paper for match box- Specification

4440 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Grammage (substance))	-	1110	5% to BIS
Cl-4.2, Table-1 (i)(Tear index, mN·m2/g, Min)	-	1110	5% to BIS
Cl-4.2, Table-1 (ii)(Tensile index, N·m/g, Min)	-	1110	5% to BIS
Cl-4.2, Table-1 (iii)(One-minute cobb test, Max)	-	1110	5% to BIS
Cl-4.1(Grammage (substance))	-	1110	5% to BIS
Cl-4.2, Table-1 (i)(Tear index, mN·m2/g, Min)	-	1110	5% to BIS
Cl-4.2, Table-1 (ii)(Tensile index, N·m/g, Min)	-	1110	5% to BIS
Cl-4.2, Table-1 (iii)(One-minute cobb test, Max)	-	1110	5% to BIS

13 Oct, 2027

-
Included w.e.f.28.05.2025 Exclusion Cl-4.3 (Additional Requirements for ECO-Mark)

3378

BIS, Western Regional Laboratory (WRL)

None

IS 15757 (2022)

FOLLOW-UP FORMULA-COMPLEMENTARY FOODS - SPECIFICATION (First Revision of IS 15757)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 4.8,Table 1 ,Sl No i) (Moisture)	-
Clause 4.8,Table 1 ,Sl No ii) (Total Milk Protein)	-
Clause 4.8,Table 1 ,Sl No iii) (Total Fat)	-
Clause 4.8,Table 2 ,Sl No iv) (Yeast and mould count)	-

-
-

3379

EMC Testing and Compliance LLP, Gurugram

8141526

IS 4250 (2025)

Electric Food-Mixers (Liquidizers and Grinders) and Centrifugal Juicers ï¿½ Specification ( Second Revision )

Mixers (Liquidizers and Grinders) and Centrifugal Juicers

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	500	-
Cl-5(General Conditions for the tests)	-	500	-
Cl-6(Classification)	-	500	-
Cl-7(Marking)	-	500	-
Cl-8(Safety Requirements)	-	30000	-
Cl-9(Endurance fpr motor and base assembly)	-	1000	-
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	500	-
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	500	-
Cl-10.4(Idli Batter)	-	500	-
Cl-10.5(Operational Tests for Juicers)	-	500	-
Cl-11(Temperature Withstand Test for Bowl)	-	500	-
Cl-12.1(Test for Switches)	-	500	-
Cl-13(Strength of Assembly)	-	500	-
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	500	-
Cl-14.2, Table-2 (ii)(Power input and current)	-	1000	-
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	500	-
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	1000	-
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	500	-
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	500	-

19 Jul, 2027

-
Included w.e.f.15.04.2025.

3380

Vimta labs Limited, Hyderabad

6102906

IS 7021 (2017)

Protein - Rich food supplements for infants and pre - School children - Specification (First Revision)

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3.3 Table 2(Coliform count)	-	300	nil
4.3.3 Table 2(Bacterial Count)	-	300	nil
4.3.3 Table 2(Protein)	-	500	nil
4.3.3 Table 2(Moisture)	-	300	nil
4.3.3 Table 2(Fat)	-	500	nil
4.3.3 Table 2(Total Ash)	-	300	nil
4.3.3 Table 2(Acid insoluble Ash)	-	300	nil
4.3.3 Table 2(Crude Fibre)	-	600	nil
4.3.3 Table 2(Crude Fibre)	-	600	nil

31 Mar, 2028

-
-

3381

Vimta labs Limited, Hyderabad

6102906

IS 1806 (2018)

Malted milk foods - Specification (Second Revision)

6970 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3-Table 1- ix(Bacterial count)	-	300	NIL
4.3-Table 1- i(Moisture)	-	300	Nil
4.3-Table 1- x(Coliform count)	-	300	nil
4.3-Table 1- xi(E. coli)	-	350	nil
4.3-Table 1- xii(Yeast and mould count)	-	350	nil
4.3-Table 1- xiii(Salmonella)	-	520	nil
4.3-Table 1- xiv(Shigella)	-	550	nil
4.3-Table 1- xv(Vibrio cholerae )	-	550	nil
4.3-Table 1- xv( V. parahaemolyticus)	-	500	nil
4.3-Table 1- xvi(Faecal streptococci )	-	600	nil
4.3-Table 1- xvi( Staphylococcusaureas)	-	550	nil
4.3-Table 1- ii(Total protein (N × 6.25) (on dry basis),)	-	600	NIL
4.3-Table 1- iii(Total fat (on dry basis))	-	600	NIL
4.3-Table 1- iv(Total ash (on dry basis))	-	300	NIL
4.3-Table 1- v(Acid insoluble ash (on dry basis) (in dilute HCl))	-	350	NIL
4.3-Table 1- vi(Solubility)	-	250	NIL
4.3-Table 1- vii(Cocoa powder (on dry basis))	-	400	NIL
4.3-Table 1- viii(Test for starch)	-	500	NIL

31 Mar, 2028

-
-

3382

Vimta labs Limited, Hyderabad

6102906

IS 13334 : Part 1 (2014)

Skimmed milk powder - Specification: Part 1 standard grade (Second Revision)

10430 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.6(Scorched particles)	-	1250	-
5.6(Titratable acidity (lactic acid))	-	500	-
5.6(Total ash (on dry basis))	-	300	-
5.6(Insolubility index)	-	1500	-
5.6(Milk fat)	-	750	-
5.6(Milk protein in milk solids not fat)	-	1000	-
5.6(Moisture)	-	750	-
5.2(Absence of extraneous matter, added colour and added flavour)	-	800	-
4(Description)	-	100	-
Cl 5.4(The flavour of the product or of the reconstituted milk shall be pleasant and clean (see IS 10030).)	-	500	-
5.6(Listeria monocytogenes)	-	1000	-
5.6(Spore count, Anaerobic (Sulfite reducing Clostridia))	-	1200	-
5.6(Spore count, Aerobic (Bacillus cereus))	-	700	-
5.6(Salmonella)	-	600	-
5.6(Coagulase positive Staphylococcus aureus)	-	500	-
5.6(Escherichia coli)	-	500	-
5.6(Coliform count )	-	300	-
5.6(Bacterial count)	-	300	-

31 Mar, 2028

-
-

3383

Vimta labs Limited, Hyderabad

6102906

IS 3865 (2001)

Beer - Specification (Third Revision)

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.9(Free from dirt and foreign matter)	-	0	Nil
5.9(Freedom from Sedimentation and Harmful)	-	500	Nil
5.9 S. No.1(i)(Ethanol Content 15 0 c,)	-	1500	Nil
5.9 (ii)(pH)	-	300	Nil
5.9 (iii)(Carbon dioxide)	-	1500	Nil
5.9 (iv)(Methyl alcohol)	-	1500	Nil

31 Mar, 2028

-
-

3384

Vimta labs Limited, Hyderabad

6102906

IS 6613 (2002)

Neutral spirit for alcoholic drinks - Specification (First Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4, Table 1(Relative density at 20/20°C)	-	500	NIL
4, Table 3(Miscibility with water)	-	500	NIL
4, Table 4(Acidity as acetic acid)	-	500	NIL
4, Table 5(Residue on evaporation, )	-	500	NIL
4, Table 7(Lead)	-	500	NIL
4, Table 8(Methyl alcohol )	-	1500	NIL
4, Table 9(Furfural)	-	100	NIL
4, Table 12(Copper ( as Cu ))	-	500	NIL
4, Table 2(Ethanol percent (v/v at 20°C))	-	1500	NIL
4, Table 6(Esters as CH3COOC2H5 )	-	1500	NIL
4, Table 11(Permanganate reaction time)	-	1500	NIL
4, Table 10(Aldehyde as acetaldehyde)	-	1000	NIL
4, Table 13(Higher alcohol as iso-amyl alcohol)	-	1500	-

31 Mar, 2028

-
-

3385

Vimta labs Limited, Hyderabad

6102906

IS 5286 (2005)

Alcoholic Drinks - Vodka - Specification (Second Revision)

9760 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 7.6, S. no.1(Residue on evaporation)	-	300	Nil
Clause 7.6, S. no.2(Volatile acids as acetic acid)	-	300	Nil
Clause 7.6, S. no.3(Esters as ethyl acetate)	-	1000	Nil
Clause 7.6, S. no.4(Higher alcohols as amyl alcohol)	-	1000	Nil
Clause 7.6, S. no.5(Aldehydes as acetaldehyde)	-	1500	Nil
Clause 7.6, S. no.6(Furfural)	-	1000	Nil
Clause 7.6, S. no.8(Methyl alcohol)	-	1500	Nil
Clause 7.6, S. no.7(Copper (as Cu))	-	500	Nil

31 Mar, 2028

-
-

3386

Vimta labs Limited, Hyderabad

6102906

IS 7058 (2005)

Table wines - Specification (Second Revision)

5760 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.8 Table 1(Volatile acidity expressed as acetic acid , All types)	-	100	NIL
7.8 Table 1(Tannins, All types)	-	400	NIL
7.8 Table 1(pH, All types)	-	100	NIL
7.8 Table 1(Reducing residual sugar , Dry white / Red )	-	400	NIL
7.8 Table 1(Total acids(as tartaric acid), All types)	-	150	NIL
7.1(ethyl Alcohol Content)	-	800	NIL
7.8 Table 1(Reducing residual sugar, Sparkling Wine )	-	400	NIL
7.8 Table 1(Free sulphur dioxide, All types)	-	400	NIL
7.8 Table 1(Reducing residual sugar, Sweet White /Red )	-	400	NIL
7.8 Table 1(Total sulphur dioxide, All types)	-	400	NIL
7.8 Table 1(Extracts, All types)	-	290	NIL
7.4(Freedom from Sedimentation and Harmful Ingredients)	-	300	nil
7.5(Colour and Additives)	-	500	nil
7.6(Taste and Aroma)	-	200	nil
7.8 Table 1(Volatile acidity expressed as acetic acid , All types)	-	200	nil
7.8 Table 1(Aldehydes as acetaldehyde (expressed in terms ofg/1 of absolute alcohol), All types)	-	500	nil
7.8 Table 1(Esters as ethyl acetate (expressed in terms of grams per Iitre of absolute alcohol),All types)	-	500	NIL
7.8 Table 1(Higher alcohols as amyl alcohol (expressed in terms ofg/1 of absolute alcohol), All types)	-	500	nil
7.8 Table 1(Copper (as Cu) , All types)	-	300	nil
7.8 Table 1(Iron (as Fe), All types)	-	300	NIL

31 Mar, 2028

-
-

3387

Vimta labs Limited, Hyderabad

6102906

IS 1374 (1992)

Poultry Feeds

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.3-Table 5-i(OPTIONAL- Maize)	-	750	-
4.2.3-Table 5-ii(OPTIONAL- Jowar)	-	750	-
4.2.3-Table 5-iii(OPTIONAL- Bajara)	-	750	-
4.2.3-Table 5-iv(OPTIONAL- Rice (broken))	-	750	-
4.2.3-Table 5-v(OPTIONAL- Wheat)	-	750	-
4.2.3-Table 5-vi(OPTIONAL- Barley Grain)	-	750	-
4.2.3-Table 5-vii(OPTIONAL- Rice Polish)	-	750	-
4.2.3-Table 5-viii(OPTIONAL- Ragi)	-	750	-
4.2.3-Table 5-ix(OPTIONAL- Tapioca Flour)	-	750	-
4.2.3-Table 5-x(OPTIONAL- Vegetable Fat)	-	750	-
4.2.3-Table 5-xi(OPTIONAL- Soy Extract)	-	750	-
4.2.3-Table 5-xii(OPTIONAL- Soy Meal)	-	750	-
4.2.3-Table 5-xiii(OPTIONAL- Groundnut Extract)	-	750	-
4.2.3-Table 5-xiv(OPTIONAL- Groundnut Meal)	-	750	-
4.2.3-Table 5-xv(OPTIONAL- Rapseed Extract)	-	750	-
4.2.3-Table 5-xvi(OPTIONAL- Sunflower Extract)	-	750	-
4.2.3-Table 5-xvii(OPTIONAL- Sesame Extract)	-	750	-
4.2.3-Table 5-xviii(OPTIONAL- Fullfat Soy)	-	750	-
4.2.3-Table 5-xix(OPTIONAL- Maize Gluten 42)	-	750	-
4.2.3-Table 5-xx(OPTIONAL- Maize Gluten 60)	-	750	-
4.2.3-Table 5-xxi(OPTIONAL- Fishmeal)	-	750	-
4.2.3-Table 5-xxii(OPTIONAL- Meat & Bonemeal)	-	750	-

31 Mar, 2028

-
-

3388

Vimta labs Limited, Hyderabad

6102906

IS 1166 (1986)

Specification for condensed milk, partly skimmed and skimmed condensed milk (Second Revision)

10430 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 1 (i) (Apendix B)(Total milk solids -Condensed Milk)	-	500	-
Table 1 (i) (Apendix B)(Total milk solids - Partly Skimmed Condenied Milk)	-	500	-
Table 1 (i) (Apendix B)(Total milk solids - Skirmned Condensed Milk)	-	500	-
Table 1 (ii) (IS : 11762- 1986)(Fat -Condensed Milk)	-	500	-
Table 1 (ii) (IS : 11762- 1986)(Fat -Partly Skimmed Condenied Milk)	-	500	-
Table 1 (ii) (IS : 11762- 1986)(Fat -Skirmned Condensed Milk)	-	500	-
Table 1 (iii) (Apendix C)(Sucrose -Condensed Milk)	-	1500	-
Table 1 (iii) (Apendix C)(Sucrose -Partly Skimmed Condenied Milk)	-	1500	-
Table 1 (iii) (Apendix C)(Sucrose -Skirmned Condensed Milk)	-	1500	-
Table 1 (vi) (Apendix D)(Titratable acidity (as lactic acid) -Condensed Milk)	-	500	-
Table 1 (vi) (Apendix D)(Titratable acidity (as lactic acid) -Partly Skimmed Condenied Milk)	-	500	-
Table 1 (vi) (Apendix D)(Titratable acidity (as lactic acid) -Skirmned Condensed Milk)	-	500	-
Table 1 (v) (Apendix E)(Accelerated starage test -Condensed Milk)	-	5000	-
Table 1 (v) (Apendix E)(Accelerated starage test -Partly Skimmed Condenied Milk)	-	5000	-
Table 1 (v) (Apendix E)(Accelerated starage test -Skirmned Condensed Milk)	-	5000	-
Cl.5.1.10.1(Salmonella IS 5887 Part 3)	-	600	-
Cl.5.1.10.1(Shigella IS 5887 Part 7)	-	600	-
Cl.5.1.10.2(Coliform Count IS 5401 Part 1)	-	300	-
Cl.5.1.10.3(Yeast and Mould Count IS 5403)	-	400	-
Cl.5.1.10.4(Coagulase positive Staphylococcus aureus IS 5887 Part 2)	-	500	-
Cl.5.1.10.5(Escherichia coli IS 5887 Part 1)	-	500	-

31 Mar, 2028

-
-

3389

Vimta labs Limited, Hyderabad

6102906

IS 14542 (1998)

Partly skimmed milk powder specification

6039 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 1(i)(Moisture Type I (IS 11623))	-	300	-
Table 1(i)(Moisture Type II (IS 11623))	-	300	-
Table 1(ii)(Total solids (milk solids and added salts) Type I (IS 11623))	-	500	-
Table 1(ii)(Total solids (milk solids and added salts) Type II (IS 11623))	-	500	-
Table 1(iii)(Milk fat, Type I (IS I1722))	-	500	-
Table 1(iii)(Milk fat, Type II (IS I1722))	-	500	-
Table 1(iv)(Insolubility index, a) Roller dried Type I (IS 12759))	-	2000	-
Table 1(iv)(Insolubility index, a) Roller dried Type II (IS 12759))	-	2000	-
Table 1(iv)(Insolubility index, b) Spray dried Type I (IS 12759))	-	2000	-
Table 1(iv)(Insolubility index, b) Spray dried Type II (IS 12759))	-	2000	-
Table 1(v)(Total ash Type I (Annex B of IS 14433 - Part 1))	-	300	-
Table 1(v)(Total ash Type II (Annex B of IS 14433 - Part 1))	-	300	-
Table 1(vi)(Titratable acidity (as lactic acid) Type I (IS 11766))	-	500	-
Table 1(vi)(Titratable acidity (as lactic acid) Type II (IS 11766))	-	500	-
Cl 6.4(Flavour and Taste (IS 10030))	-	500	-
Cl 6.6.1(Bacterial Count (IS 5402))	-	300	-
Cl 6.6.2(Coliform Count ((IS 5402))	-	300	-

31 Mar, 2028

-
-

3390

Eureka Analytical Services Private Limited, Bengaluru

6171206

IS 2052 (2023)

Compounded feeds for cattle ï¿½ Specification

21000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl no.4.3,7.1, Table no. 1(i)(Moisture)	-	300	NA
Cl no.4.3,7.1, Table no. 1(ii)(Crude protein (N × 6.25))	-	550	NA
Cl no.4.3, 7.1,Table no. 1(iii)(Crude fat)	-	550	NA
Cl no.4.3 ,7.1, Table no. 1(iv)(Crude fibre)	-	425	NA
Cl no.4.3 ,7.1, Table no. 1(v)(Acid insoluble ash)	-	550	NA
Cl no.4.3,7.1Table no. 1(vi)("Salt (as NaCl based on Na or Cl), percent by mass")	-	400	NA
Cl no.4.3 7.1,Table no. 1(vii)(Calcium (as Ca))	-	425	NA
Cl no.4.3 ,7.1, Table no. 1(x)(Urea, percent by mass)	-	500	NA
Cl no.4.3,7.1, Table no. 1(xi)(Vitamin A)	-	2000	NA
Cl no.4.3,7.1,Table no. 1(xii)(Vitamin D)	-	3500	NA
Cl no.4.3 ,7.1, Table no. 1(xiii)(Vitamin E)	-	2000	NA
Cl no.4.3 ,7.1, Table no. 1(xiv)(Aflatoxin B1)	-	3000	NA+
Cl no.4.3 ,7.1, Table no. 1(xv)(Cadmium)	-	500	-
Cl no.4.1(General)	-	100	-
Cl no.4.3,7.1,Table no. 1(viii)(Total phosphorus)	-	800	-
Cl no.4.3,7.1,Table no. 1(ix)(Available phosphorus)	-	550	-
Cl no.4.2(Ingredients)	-	0	Not under analytical testing
4.2.2(Ratio of total nitrogen to sulphur/ IS/ISO 5983 (Part 1)* or IS/ISO 5983 (Part 2) ISO 16634-Sulphur-AnnexB (IS 1664 or EN 15621))	-	900	-
Cl no.5(Packing and marking)	-	0	Not under analytical testing
4.1(General)	-	100	-
4.3 Table no.1 (i)(Moisture/4 of IS 7874 (Part 1))	-	300	-
4.3 Table no.1 (ii)("Crude Protein(ODB)/IS/ISO 5983 (Part 1)* or IS 5983 (Part 2) or ISO 16634-1")	-	550	-
4.3 Table no.1 (iii)(Crude fat (ODB) /IS/ISO 6492)	-	550	-
4.3 Table no.1 (iv)("Crude fibre (ODB)/IS/ISO 6865 ")	-	425	-
4.3 Table no.1 (v)(Acid insoluble ash (ODB)/Annex A of IS 1712 or IS 14826*)	-	550	-
4.3 Table no.1 (vi)("Salt (ODB)(as NaCl based on Na or Cl)/4 of IS 7874 (Part 2)")	-	400	-
4.3 Table no.1 (vii)(Calcium(ODB) (as Ca)/IS 13433 (Part 1) or IS 15121* or EN 15621)	-	425	-
4.3 Table no.1 (viii)(Total phosphorus (ODB)/IS 14828* or EN 15621)	-	800	-
4.3 Table no.1 (ix)(Available phosphorus (ODB)/Annex F of IS 1374)	-	550	-
4.3 Table no.1 (x)(Urea (ODB)/IS 7874 (Part 1) or AOAC 967.07)	-	500	-
4.3 Table no.1 (xi)(Vitamin A(ODB)/IS 15120)	-	2000	-
4.3 Table no.1 (xii)("Vitamin D3 (ODB)/Annex C * or J. AOAC Int. 2012, Vol. 95, No. 5, Pages 1487–1494")	-	3500	-
4.3 Table no.1 (xiii)(Vitamin E(ODB)/IS 15948)	-	2100	-
4.3 Table no.1 (xiv)("Aflatoxin B1 (ODB)/IS/ISO 14718* or ISO 17375 or AOAC 2003.02")	-	3000	-
4.3 Table no.1 (xv)(Cadmium (ODB)/EN 17053)	-	425	-
Cl-4.2.1(Ingredients)	-	0	-
Cl-4.2.3(material)	-	0	-
Cl-4.2.4(Aflatoxin B1)	-	3000	-
Cl no.4.3,7.1, Table no. 1(i)(Moisture)	-	300	-
Cl no.4.3,7.1, Table no. 1(ii)(Crude protein (N × 6.25))	-	550	-
Cl no.4.3, 7.1,Table no. 1(iii)(Crude fat)	-	550	-
Cl no.4.3 ,7.1, Table no. 1(iv)(Crude fibre)	-	425	-
Cl no.4.3 ,7.1, Table no. 1(v)(Acid insoluble ash)	-	550	-
Cl no.4.3,7.1Table no. 1(vi)("Salt (as NaCl based on Na or Cl), percent by mass")	-	400	-
Cl no.4.3 7.1,Table no. 1(vii)(Calcium (as Ca))	-	425	-
Cl no.4.3 ,7.1, Table no. 1(x)(Urea, percent by mass)	-	500	-
Cl no.4.3,7.1, Table no. 1(xi)(Vitamin A)	-	2000	-
Cl no.4.3,7.1,Table no. 1(xii)(Vitamin D)	-	3500	-
Cl no.4.3 ,7.1, Table no. 1(xiii)(Vitamin E)	-	2100	-
Cl no.4.3 ,7.1, Table no. 1(xiv)(Aflatoxin B1)	-	3000	-
Cl no.4.3 ,7.1, Table no. 1(xv)(Cadmium)	-	425	-
Cl no.4.1(General)	-	100	-
Cl no.4.3,7.1,Table no. 1(viii)(Total phosphorus)	-	800	-
Cl no.4.3,7.1,Table no. 1(ix)(Available phosphorus)	-	550	-
Cl no.4.2(Ingredients)	-	0	-
4.2.2(Ratio of total nitrogen to sulphur/ IS/ISO 5983 (Part 1)* or IS/ISO 5983 (Part 2) ISO 16634-Sulphur-AnnexB (IS 1664 or EN 15621))	-	900	-
Cl no.5(Packing and marking)	-	0	-
4.1(General)	-	100	-
4.3 Table no.1 (i)(Moisture/4 of IS 7874 (Part 1))	-	300	-
4.3 Table no.1 (ii)("Crude Protein(ODB)/IS/ISO 5983 (Part 1)* or IS 5983 (Part 2) or ISO 16634-1")	-	550	-
4.3 Table no.1 (iii)(Crude fat (ODB) /IS/ISO 6492)	-	550	-
4.3 Table no.1 (iv)("Crude fibre (ODB)/IS/ISO 6865 ")	-	425	-
4.3 Table no.1 (v)(Acid insoluble ash (ODB)/Annex A of IS 1712 or IS 14826*)	-	550	-
4.3 Table no.1 (vi)("Salt (ODB)(as NaCl based on Na or Cl)/4 of IS 7874 (Part 2)")	-	400	-
4.3 Table no.1 (vii)(Calcium(ODB) (as Ca)/IS 13433 (Part 1) or IS 15121* or EN 15621)	-	425	-
4.3 Table no.1 (viii)(Total phosphorus (ODB)/IS 14828* or EN 15621)	-	800	-
4.3 Table no.1 (ix)(Available phosphorus (ODB)/Annex F of IS 1374)	-	550	-
4.3 Table no.1 (x)(Urea (ODB)/IS 7874 (Part 1) or AOAC 967.07)	-	500	-
4.3 Table no.1 (xi)(Vitamin A(ODB)/IS 15120)	-	2000	-
4.3 Table no.1 (xii)("Vitamin D3 (ODB)/Annex C * or J. AOAC Int. 2012, Vol. 95, No. 5, Pages 1487–1494")	-	3500	-
4.3 Table no.1 (xiii)(Vitamin E(ODB)/IS 15948)	-	2100	-
4.3 Table no.1 (xiv)("Aflatoxin B1 (ODB)/IS/ISO 14718* or ISO 17375 or AOAC 2003.02")	-	3000	-
4.3 Table no.1 (xv)(Cadmium (ODB)/EN 17053)	-	425	-
Cl-4.2.1(Ingredients)	-	0	-
Cl-4.2.3(material)	-	0	-
Cl-4.2.4(Aflatoxin B1)	-	3500	-
Cl no.4.3,7.1, Table no. 1(i)(Moisture)	-	-	-
Cl no.4.3,7.1, Table no. 1(ii)(Crude protein (N × 6.25))	-	-	-
Cl no.4.3, 7.1,Table no. 1(iii)(Crude fat)	-	-	-
Cl no.4.3 ,7.1, Table no. 1(iv)(Crude fibre)	-	-	-
Cl no.4.3 ,7.1, Table no. 1(v)(Acid insoluble ash)	-	-	-
Cl no.4.3,7.1Table no. 1(vi)("Salt (as NaCl based on Na or Cl), percent by mass")	-	-	-
Cl no.4.3 7.1,Table no. 1(vii)(Calcium (as Ca))	-	-	-
Cl no.4.3 ,7.1, Table no. 1(x)(Urea, percent by mass)	-	-	-
Cl no.4.3,7.1, Table no. 1(xi)(Vitamin A)	-	-	-
Cl no.4.3,7.1,Table no. 1(xii)(Vitamin D)	-	-	-
Cl no.4.3 ,7.1, Table no. 1(xiii)(Vitamin E)	-	-	-
Cl no.4.3 ,7.1, Table no. 1(xiv)(Aflatoxin B1)	-	-	-
Cl no.4.3 ,7.1, Table no. 1(xv)(Cadmium)	-	-	-
Cl no.4.1(General)	-	-	-
Cl no.4.3,7.1,Table no. 1(viii)(Total phosphorus)	-	-	-
Cl no.4.3,7.1,Table no. 1(ix)(Available phosphorus)	-	-	-
Cl no.4.2(Ingredients)	-	-	-
4.2.2(Ratio of total nitrogen to sulphur/ IS/ISO 5983 (Part 1)* or IS/ISO 5983 (Part 2) ISO 16634-Sulphur-AnnexB (IS 1664 or EN 15621))	-	-	-
Cl no.5(Packing and marking)	-	-	-
4.1(General)	-	-	-
4.3 Table no.1 (i)(Moisture/4 of IS 7874 (Part 1))	-	-	-
4.3 Table no.1 (ii)("Crude Protein(ODB)/IS/ISO 5983 (Part 1)* or IS 5983 (Part 2) or ISO 16634-1")	-	-	-
4.3 Table no.1 (iii)(Crude fat (ODB) /IS/ISO 6492)	-	-	-
4.3 Table no.1 (iv)("Crude fibre (ODB)/IS/ISO 6865 ")	-	-	-
4.3 Table no.1 (v)(Acid insoluble ash (ODB)/Annex A of IS 1712 or IS 14826*)	-	-	-
4.3 Table no.1 (vi)("Salt (ODB)(as NaCl based on Na or Cl)/4 of IS 7874 (Part 2)")	-	-	-
4.3 Table no.1 (vii)(Calcium(ODB) (as Ca)/IS 13433 (Part 1) or IS 15121* or EN 15621)	-	-	-
4.3 Table no.1 (viii)(Total phosphorus (ODB)/IS 14828* or EN 15621)	-	-	-
4.3 Table no.1 (ix)(Available phosphorus (ODB)/Annex F of IS 1374)	-	-	-
4.3 Table no.1 (x)(Urea (ODB)/IS 7874 (Part 1) or AOAC 967.07)	-	-	-
4.3 Table no.1 (xi)(Vitamin A(ODB)/IS 15120)	-	-	-
4.3 Table no.1 (xii)("Vitamin D3 (ODB)/Annex C * or J. AOAC Int. 2012, Vol. 95, No. 5, Pages 1487–1494")	-	-	-
4.3 Table no.1 (xiii)(Vitamin E(ODB)/IS 15948)	-	-	-
4.3 Table no.1 (xiv)("Aflatoxin B1 (ODB)/IS/ISO 14718* or ISO 17375 or AOAC 2003.02")	-	-	-
4.3 Table no.1 (xv)(Cadmium (ODB)/EN 17053)	-	-	-
Cl-4.2.1(Ingredients)	-	-	-
Cl-4.2.3(material)	-	-	-
Cl-4.2.4(Aflatoxin B1)	-	-	-

02 Aug, 2028

-
Included w.e.f.11.07.2025

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number