BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15632 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

3631

Sleen India Biz venture Private Limited, Agra

9139736

IS 12254 (2021)

POLYVINYLCHLORIDE PVC INDUSTRIAL BOOTS - SPECIFICATION Second Revision

48150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2(Size)	-	100	-
5.3(Height)	-	200	-
5.4.2(Ergonomic feature)	-	400	-
5.4.3(Sole bond)	-	600	-
5.4.4(Slip resistance)	-	1000	-
5.4.5(Leak proofness)	-	500	-
5.4.6.1(Toe caps General)	-	200	-
5.4.6.2(Internal length of toecaps)	-	200	-
5.4.6.3(Corrosion resistance)	-	500	-
5.4.6.4(Impact resistance)	-	600	-
5.4.6.5(Compression resistance)	-	600	-
5.4.7(Colour)	-	200	-
5.5.1(Upper material)	-	150	-
5.5.1(Upper Thickness)	-	150	-
5.5.2(Upper tensile strength)	-	600	-
5.5.3(Upper flexing)	-	600	-
5.5.4(Upper Hardness)	-	500	-
5.6.1(Lining material)	-	200	-
5.6.2(Lining Tear strength)	-	600	-
5.6.3(Lining abrasion)	-	800	-
5.6.4(Lining adhesion with upper)	-	800	-
5.7.1(Insole material)	-	400	-
5.7.1(Insole thickness)	-	300	-
5.7.2(Insole abrasion)	-	650	-
5.7.3(Water absorption and desorption)	-	600	-
5.8.2(Eyelets material)	-	200	-
5.8.2(Lace material)	-	200	-
5.8.2(Lace length)	-	200	-
5.8.2(Lace breaking load)	-	450	-
5.9.1(Insock material)	-	200	-
5.9.2(Inscok abrasion resistance)	-	600	-
5.9.3(Insock water absorption and desorption)	-	600	-
5.8.2(Closing thread breaking load)	-	450	-
5.11.1(Outsole material)	-	200	-
5.11.1(Outsole thickness)	-	250	-
5.11.2(Outsole density)	-	250	-
5.11.3(Outsole Interlayer bond)	-	450	-
5.11.4(Outsole tear)	-	500	-
5.11.5(Outsole Abrasion)	-	600	-
5.11.6(Outsole hardness)	-	400	-
5.11.7(Outsole flexing)	-	550	-
5.4.8.1(Conductive Footwear)	-	2000	-
5.4.8.2(Antistatic Footwear)	-	2000	-
5.4.8.3.2(Penetration resistance)	-	800	-
5.4.8.4(Cut resistance)	-	600	-
5.5.5(Upper Cold flex resistance)	-	1000	-
5.4.8.5(Outsole resistance to acid and alkali)	-	1000	-
5.4.8.6(Outsole resistance to fuel oil)	-	1000	-
5.11.8(Outsole cold flex resistance)	-	1000	-
6.1(Volatility)	-	300	-
6.2(Lead content)	-	1000	-
Table 1 as per IS 17011 2018(pH)	-	500	-
Table 1 as per IS 17011 2018(Phthalates (each individual phthalate))	-	2500	-
Table 1 as per IS 17011 2018(Nickel, on skin contact)	-	1500	-
Table 1 as per IS 17011 2018(Allergenic and carcinogenic disperse dyes)	-	3000	-
Table 1 as per IS 17011 2018(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Table 1 as per IS 17011 2018(Aromatic amines released from Azo dyes (each individual amine))	-	0	Repeated clause
Table 1 as per IS 17011 2018(Chromium (VI))	-	1000	-
Table 1 as per IS 17011 2018(Dimethyl fumarate (DMFU))	-	2000	-
Table 1 as per IS 17011 2018(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Table 1 as per IS 17011 2018(Formaldehyde)	-	1000	-
Table 1 as per IS 17011 2018(Organotin compounds)	-	2000	-
Table 1 as per IS 17011 2018(PCP-TeCP-TriCP polychlorophenols)	-	2000	-
5.10(Closing Thread (If used))	-	600	-
Cl.6.1(Volatility- IS 12240 (Part 4))	-	0	-
Cl.6.2(Lead Content-IS 12240 (Part 5),)	-	0	-

-
Included w.e.f 08.12.2025

3632

Atckon Laboratories LLP, Bahadurgarh

8186436

IS 733 (1983)

Specification for wrought aluminium and aluminium alloy bars, rods and sections (For General Engineering Purposes) (Third Revision)

ALL TYPES

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4(Freedom from Defects)	-	6000	-
Cl. 5.1, Table 2(0.2 Percent proof stress- IS 1816)	-	6000	-
Cl. 5.1, Table 2(Tensile Strength- IS 1816)	-	6000	-
Cl. 5.1, Table 2(Elongation on 50 mm or 5.65√So Gauge Length)	-	6000	-
Cl. 0.4, 5.1, Table 1(Aluminium- IS 504 or by any other suitable instrumental method)	-	6000	-
Cl. 0.4, 5.1, Table 1(Copper- IS 504 or by any other suitable instrumental method)	-	6000	-
Cl. 0.4, 5.1, Table 1(Magnesium- IS 504 or by any other suitable instrumental method)	-	6000	-
Cl. 0.4, 5.1, Table 1(Silicon- IS 504 or by any other suitable instrumental method)	-	6000	-
Cl. 0.4, 5.1, Table 1(Iron- IS 504 or by any other suitable instrumental method)	-	6000	-
Cl. 0.4, 5.1, Table 1(Zinc- IS 504 or by any other suitable instrumental method)	-	6000	-
Cl. 0.4, 5.1, Table 1(Aluminium- IS 504 or by any other suitable instrumental method)	-	6000	-
Cl. 0.4, 5.1, Table 1(Titanium and / or other grain refining elements - IS 504 or by any other suitable instrumental method)	-	6000	-
Cl. 0.4, 5.1, Table 1(Chromium- IS 504 or by any other suitable instrumental method)	-	6000	-
Cl. 0.4, 5.1, Table 1(Ti+ V- IS 504 or by any other suitable instrumental method)	-	6000	-
Cl. 0.4, 5.1, Table 1(Total Impurities- IS 504 or by any other suitable instrumental method)	-	6000	-
Cl. 0.4, 5.1, Table 1(Cr+ Mn- IS 504 or by any other suitable instrumental method)	-	6000	-
7(Dimension - IS 3965)	-	6000	-
11(Marking)	-	6000	-
Table-1, Clause - 5.1(Copper)	-	6000	-
Table-1, Clause - 5.1(Iron)	-	6000	-
Table-1, Clause - 5.1(Magnesium)	-	6000	-
Table-1, Clause - 5.1(Manganese)	-	6000	-
Table-1, Clause - 5.1(Titanium)	-	6000	-
Table-1, Clause - 5.1(Silicon)	-	6000	-
Table-1, Clause - 5.1(Chromium)	-	6000	-
Table-1, Clause - 5.1(Zinc)	-	6000	-

-
Included w.e.f. 09.10.2025

3633

Ratlam Smart Laboratory (IOCL)

8192614

IS 1571 (2018)

Aviation turbine fuels, kerosine type, jet - A - 1 - Specification (Tenth Revision)

33200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3.2.2, 3.2.6, Table-1 (a)(Visual appearance)	-	200	-
Cl-3.2.2, 3.2.6, Table-1 (B)(Colour)	-	1130	-
Cl-3.2.2, 3.2.6, Table-1, (ii) (a)(Total acidi,t y mg KOHM/ga, x)	-	1530	-
Cl-3.2.2, 3.2.6, Table-1, (iii) (a), 1)(Distillation:- Initial boiling point, °)	-	0	-
Cl-3.2.2, 3.2.6, Table-1, (iii) (a), 2)(Distillation:- 10 percent recovery °Cv/,v , Max)	-	0	-
Cl-3.2.2, 3.2.6, Table-1, (iii) (a), 3)(Distillation:- 50 percent recovery °C, v/v)	-	0	-
Cl-3.2.2, 3.2.6, Table-1, (iii) (a), 3)(Distillation:- 50 percent recovery °C, v/v)	-	0	-
Cl-3.2.2, 3.2.6, Table-1, (iii) (a), 4)(Distillation:- 90 percent recovery °C, v/v)	-	0	-
Cl-3.2.2, 3.2.6, Table- 1, (iii) (a), 5)(Distillation:- Final boiling point,°C, Max)	-	2650	-
Cl-3.2.2, 3.2.6, Table-1, (iii) (a), 7)(Distillation:- Loss, percent v/v, Max)	-	0	-
Cl-3.2.2, 3.2.6, Table-1, (iii) (a), 6)(Distillation:- Residue, percent v/v, Max)	-	0	-
Cl-3.2.2, 3.2.6, Table-1, (iii) (b)(Flash point ( Abel ), °C, Min)	-	1900	-
Cl-3.2.2, 3.2.6, Table-1, (iii) (c)(Density at 15°C,kg/m3)	-	1130	-
Cl-3.2.2, 3.2.6, Table- 1, (iv) (a)(Fluidity:- Freezing point, °C, Max)	-	2270	-
Cl-3.2.2, 3.2.6, Table-1, (iv) (b)(Fluidity:- Kinematic viscosity at minus 20°C, mm2/s, Max)	-	2270	-
Cl-3.2.2, 3.2.6, Table-1, (v) (a)(Specific energy10) MJ/kg, Min)	-	2480	-
Cl-3.2.2, 3.2.6, Table-1, (v) (b)(Smoke point, mm, Min or)	-	1130	-
Cl-3.2.2, 3.2.6, Table-1, (v) (b) 2)(Naphthalenes, percent v/v, Max)	-	2650	-
Cl-3.2.2, 3.2.6, Table-1, (vi) (a)(Copper strip corrosion for 2 h at 100°C)	-	1130	-
Cl-3.2.2, 3.2.6, Table-1, (vi) (b)("Silver stripcorrosion12) classification, for 4 h at 50°C, Max")	-	1340	-
Cl-3.2.2, 3.2.6, Table-1, (viii)(Contaminants: Existent gum, mg/100 ml, Max)	-	2070	-
Cl-3.2.2, 3.2.6, Table-1, (ii) (b)(Aromatics, percent by vol (Defense requirements))	-	2650	-
Cl-3.2.2, 3.2.6, Table-1, (ii) (c)(Total sulphur percent by mass, Max (Defense requirements))	-	2650	-
Cl-3.2.2, 3.2.6, Table-1, (x)(Conductivity: Electrical conductivity, pS/m19))	-	1340	-
Cl-3.2.2, 3.2.6, Table-1, (ix) a)(Water reaction: Interface rating16), Max)	-	780	-
Cl-3.2.2, 3.2.6, Table-1, (ii) (d)(Sulphur mercaptan, percent m/m. (Defense requirements))	-	1900	-

05 Dec, 2028

-
Excluding: Cl-3.1 (General-Material) Cl-3.2 (Composition) Cl-3.2.1 (Antioxidants) Cl-3.2.2 (Metal Deactivator Additive (MDA)) Cl-3.2.3 (Static Dissipater Additive (SDA)) Cl-3.2.4 (Lubricity Improver Additive (LIA)) Cl-3.2.5 (Fuel System Icing Inhibitor (FSII)) Cl-3.2.7 (Leak Detection Additive) Cl-5.2 (Marking) Cl-3.2.2, 3.2.6, Table-1 (c) (Particulate contamination, at point of 1.02) manufacture, mg/l, Max) Cl-3.2.2, 3.2.6, Table-1 (d) 1) (Particulate, at point of manufacture, cumulative channel particle counts:- ≥ 4 μm©) Cl-3.2.2, 3.2.6, Table-1 (d) 2) (Particulate, at point of manufacture, cumulative channel particle counts:- ≥6 μm(c) Cl-3.2.2, 3.2.6, Table-1 (d) 3) (Particulate, at point of manufacture, cumulative channel particle counts:- ≥14 μm©) Cl-3.2.2, 3.2.6, Table-1 (d) 4) (Particulate, at point of manufacture, cumulative channel particle counts:- ≥21 μm©)Cl-3.2.2, 3.2.6, Table-1 (d) 5) (Particulate, at point of manufacture, cumulative channel particle counts:-≥25 μm©) Cl-3.2.2, 3.2.6, Table-1 (d) 6) (Particulate, at point of manufacture, cumulative channel particle counts:- ≥30 μm©) Cl-3.2.2, 3.2.6, Table-1, (ii) (b) ("Aromatics, percent by volMumaex, or Total Aromatics, percent by volume, Max") Cl-3.2.2, 3.2.6, Table-1, (ii) (c) (Total sulphur percent by mass, Max) Cl-3.2.2, 3.2.6, Table-1, (ii) (d) (Sulphur mercaptan, percent m/m. Max) Cl-3.2.2, 3.2.6, Table-1, (ii) (e) (Doctor Test) Cl-3.2.2, 3.2.6, Table-1, (ii) (f), 1) ("Refining components, at the point of manufacture) :- Non Hydro processed Components, percent v/v") Cl-3.2.2, 3.2.6, Table-1, (ii) (f), 2) ("Refining components, at the point of manufacture8) :- Mildly Hydro processed Components, percent v/v") Cl-3.2.2, 3.2.6, Table-1, (ii) (f), 3) ("Refining components, at the point of manufacture) :- Severely Hydro processed Components, percent v/v") Cl-3.2.2, 3.2.6, Table-1, (vii) (a) (Filter pressure differential, mm Hg, Max) Cl-3.2.2, 3.2.6, Table-1, (vii) (b) 1) (Tube rating, visual (VTR)) Cl-3.2.2, 3.2.6, Table-1, (vii) (b) 2) (ITR or ETR, average over area of 2.5 mm2 in nm) Cl-3.2.2, 3.2.6, Table-1, (ix) b), 1) ("Micro-separometer rating18) at the point of manufacture: - MSEP without SDA, Min") Cl-3.2.2, 3.2.6, Table-1, (ix) b), 2) ("Micro-separometer rating18) at the point of manufacture: MSEP with SDA, Min") Cl-3.2.2, 3.2.6, Table- 1, (xi) (Lubricity: Wear scar diameter, mm, Max) Cl-3.2.2, 3.2.6, Table-1, (xii) (Identified Incidental Materials :- Fatty Acid Methyl Ester, mg/kg, Max) Cl-5.2 (Marking) Cl-3.2.2, 3.2.6, Table-1, (vi) (b) (Silver stripcorrosion12) classification, for 4 h at 50°C, (Defense requirements)) Cl-3.2.2, 3.2.6, Table- 1, (xi) (Lubricity: Wear scar diameter, mm (defense requirements)) Cl-3.2.2, 3.2.6, Table-1, (ii) (f), 4) ("Refining components, at the point of manufacture) :- Synthetic Components, percenvt/ v") Amendment No.5 Table 3 Clause G-2.5 i (Thermal stability) Amendment No.5 Table 3 Clause G-2.5 i (Test temperature for 2.5 h) Amendment No.5 Table 3 Clause G-2.5 i (Tube Rating) Amendment No.5 Table 3 Clause G-2.5 i (Annex B VTR) Amendment No.5 Table 3 Clause G-2.5 i (Annex C ITR or Annex D ETR, average over an area of 2.5 mm2) Amendment No.5 Table 3 Clause G-2.5 i (Pressure differential) Amendment No.5 Table 3 Clause G-2.5 ii (Fluidity-Freezing point) Amendment No.5 Table 3 Clause G-2.5 ii (Fluidity-Viscosity at - 40 ℃) Amendment No.5 Table 3 Clause G-2.5 iii (Aromatics) Amendment No.5 Table 3 Clause G-2.5 iv (Volatility- Distillation-T50 to T10, ℃) Amendment No.5 Table 3 Clause G-2.5 iv (Volatility- Distillation-T90 to T10, ℃) Amendment No.5 Table 3 Clause G-2.5 v (Lubricity) Amendment No.5 Table 3 Clause G-2.5 vi (Unconverted fatty acid esters and fatty acids)

3634

Rajkot Metlab Services LLP, Rajkot

7183706

IS 277 (2018)

Galvanized steel strips and sheets (Plain And Corrugated) - Specification (Seventh Revision)

3500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8.1(UTM)	-	1500	-
Cl 8.2(Press)	-	100	-
Cl 10(Galvanising Test)	-	500	-
Cl 12(Workmanship)	-	100	-
Cl 13(Weight)	-	100	-
Cl 14(Length, Width & Thickness)	-	300	-
Cl 8.1(UTM)	-	1500	-
Cl 8.2(Press)	-	100	-
Cl 10(Galvanising Test)	-	500	-
Cl 12(Workmanship)	-	100	-
Cl 13(Weight)	-	100	-
Cl 14(Length, Width & Thickness)	-	300	-
Cl 8.1(UTM)	-	1500	-
Cl 8.2(Press)	-	100	-
Cl 10(Galvanising Test)	-	500	-
Cl 12(Workmanship)	-	100	-
Cl 13(Weight)	-	100	-
Cl 14(Length, Width & Thickness)	-	300	-
7.4(Mass of Coating: Single Spot Test)	-	500	-
7.4(Mass of Coating: Triple Spot Test)	-	500	-
7.4(Mass of Coating: Single Spot Test)	-	500	-
7.4(Mass of Coating: Triple Spot Test)	-	500	-
7.4(Mass of Coating: Single Spot Test)	-	500	-
7.4(Mass of Coating: Triple Spot Test)	-	500	-
7.1 & 10.2(Mass of Coating: Single Spot Test)	-	500	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	500	-
7.1 & 10.2(Mass of Coating: Single Spot Test)	-	500	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	500	-
7.1 & 10.2(Mass of Coating: Single Spot Test)	-	500	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	500	-
7.1 & 10.2(Mass of Coating: Single Spot Test)	-	500	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	500	-
7.1 & 10.2(Mass of Coating: Single Spot Test)	-	500	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	500	-
7.1 & 10.2(Mass of Coating: Single Spot Test)	-	500	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	500	-
7.1 & 10.2(Mass of Coating: Single Spot Test)	-	500	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	500	-
7.1 & 10.2(Mass of Coating: Single Spot Test)	-	500	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	500	-
7.1 & 10.2(Mass of Coating: Single Spot Test)	-	500	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	500	-
5.1(phosphorus)	-	500	-
5.1(copper)	-	500	-
5.1(nitrogen)	-	500	-
5.1(nitrogen)	-	500	-
5.1(micro alloy)	-	500	-
5.1(micro alloy)	-	500	-
5.1(aluminium)	-	500	-
5.1(silicon )	-	500	-
5.1(silicon )	-	500	-
5.1(aluminium)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
5.1(Titanium)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
Cl. 17(Marking )	-	100	-
Cl. 14 & Cl. 15(Pitch of corrugation (average of 4))	-	300	-
Cl. 14 & Cl. 15(Depth of corrugation (average of 4))	-	300	-
Cl. 14 & Cl. 15 (Cl. 14 & Cl 15 (Number of Corrugation))	-	300	-
Cl. 14 & Cl. 15 (Cl. 14 & Cl 15 (Difference between Diagonal))	-	300	-
Cl. 14 & Cl. 15 (Cl. 14 & Cl. 15 (Thickness))	-	300	-
Cl. 14 (Cl. 14 & Cl 15 (Width))	-	300	-
Cl. 14 (Cl. 14 & Cl 15 (Length))	-	300	-
Cl.12(Freedom from defects)	-	100	-
Cl. 8.1 (Cl. 8.1 (Percentage Elongation ))	-	500	-
Cl. 8.1 (Cl. 8.1 (Yield Stress))	-	500	-
Cl. 8.1 (Cl. 8.1 (Tensile Strength))	-	500	-
cl 5.1, T-1, Note-6, For reinforced steel(P)	-	500	-
cl 5.1, T-1, Note-5, For Microalloying elements(Nb+V+Ti+B)	-	500	-
cl 5.1, T-1, Note-5, For Microalloying elements(B)	-	500	-
cl 5.1, T-1, Note-5, For Microalloying elements(Ti)	-	500	-
cl 5.1, T-1, Note-5, For Microalloying elements(V)	-	500	-
cl 5.1, T-1, Note-5, For Microalloying elements(Nb)	-	500	-
cl 5.1, T-1, Note-4, For Cu bearing quality(Cu)	-	500	-
cl 5.1, T-1, Note-2, When Al-Si killed(Si)	-	500	-
cl 5.1, T-1, Note-2, When Al-Si killed(Al)	-	500	-
cl 5.1, T-1, Note-2, When Si killed(Si)	-	500	-
cl 5.1, T-1, Note-2, When Al killed(Al)	-	500	-
cl 5.1, T-1, Note-3(N2)	-	500	-
cl 5.1, T-1, designation For GP 550(P)	-	500	-
cl 5.1, T-1, designation For GP 550(S)	-	500	-
cl 5.1, T-1, designation For GP 550(Mn)	-	500	-
cl 5.1, T-1, designation For GP 550(C)	-	500	-
cl 5.1, T-1, Note-3(N2)	-	500	-
cl 5.1, T-1, designation For GP 450(P)	-	500	-
cl 5.1, T-1, designation For GP 450(S)	-	500	-
cl 5.1, T-1, designation For GP 450(Mn)	-	500	-
cl 5.1, T-1, designation For GP 450(C)	-	500	-
cl 5.1, T-1, Note-3(N2)	-	500	-
cl 5.1, T-1, designation For GP 350 class-2(P)	-	500	-
cl 5.1, T-1, designation For GP 350 class-2(S)	-	500	-
cl 5.1, T-1, designation For GP 350 class-2(Mn)	-	500	-
cl 5.1, T-1, designation For GP 350 class-2(C)	-	500	-
cl 5.1, T-1, Note-3(N2)	-	500	-
cl 5.1, T-1, designation For GP 350 class-1(P)	-	500	-
cl 5.1, T-1, designation For GP 350 class-1(S)	-	500	-
cl 5.1, T-1, designation For GP 350 class-1(Mn)	-	500	-
cl 5.1, T-1, designation For GP 350 class-1(C)	-	500	-
cl 5.1, T-1, Note-3(N2)	-	500	-
cl 5.1, T-1, designation For GP 300(P)	-	500	-
cl 5.1, T-1, designation For GP 300(S)	-	500	-
cl 5.1, T-1, designation For GP 300(Mn)	-	500	-
cl 5.1, T-1, designation For GP 300(C)	-	500	-
cl 5.1, T-1, Note-3(N2)	-	500	-
cl 5.1, T-1, designation For GP275(P)	-	500	-
cl 5.1, T-1, designation For GP275(S)	-	500	-
cl 5.1, T-1, designation For GP275(Mn)	-	500	-
cl 5.1, T-1, designation For GP275(C)	-	500	-
cl 5.1, T-1, Note-3(N2)	-	500	-
cl 5.1, T-1, designation For GP250(P)	-	500	-
cl 5.1, T-1, designation For GP250(S)	-	500	-
cl 5.1, T-1, designation For GP250(Mn)	-	500	-
cl 5.1, T-1, designation For GP250(C)	-	500	-
cl 5.1, T-1, Note-3(N2)	-	500	-
cl 5.1, T-1, designation For GP230(P)	-	500	-
cl 5.1, T-1, designation For GP230(S)	-	500	-
cl 5.1, T-1, designation For GP230(Mn)	-	500	-
cl 5.1, T-1, designation For GP230(C)	-	500	-
cl 5.1, T-1, Note-3(N2)	-	500	-
cl 5.1, T-1, designation For GPIF(P)	-	500	-
cl 5.1, T-1, designation For GPIF(S)	-	500	-
cl 5.1, T-1, designation For GPIF(Mn)	-	500	-
cl 5.1, T-1, designation For GPIF(C)	-	500	-
cl 5.1, T-1, Note-3(N2)	-	500	-
cl 5.1, T-1, designation For GPED(P)	-	500	-
cl 5.1, T-1, designation For GPED(S)	-	500	-
cl 5.1, T-1, designation For GPED(Mn)	-	500	-
cl 5.1, T-1, designation For GPED(C)	-	500	-
cl 5.1, T-1, Note-3(N2)	-	500	-
cl 5.1, T-1, designation For GPD(P)	-	500	-
cl 5.1, T-1, designation For GPD(S)	-	500	-
cl 5.1, T-1, designation For GPD(Mn)	-	500	-
cl 5.1, T-1, designation For GPD(C)	-	500	-
cl 5.1, T-1, Note-3(N2)	-	500	-
cl 5.1, T-1, designation For GPL(P)	-	500	-
cl 5.1, T-1, designation For GPL(S)	-	500	-
cl 5.1, T-1, designation For GPL(Mn)	-	500	-
cl 5.1, T-1, designation For GPL(C)	-	500	-
cl 5.1, T-1, Note-3(N2)	-	500	-
cl 5.1, T-1, designation For GC(P)	-	500	-
cl 5.1, T-1, designation For GC(S)	-	500	-
cl 5.1, T-1, designation For GC(Mn)	-	500	-
cl 5.1, T-1, designation For GC(C)	-	500	-
cl 5.1, T-1, Note-3(N2)	-	500	-
cl 5.1, T-1, designation For GPH (P)	-	500	-
cl 5.1, T-1, designation For GPH (S)	-	500	-
cl 5.1, T-1, designation For GPH (Mn)	-	500	-
cl 5.1, T-1, designation For GPH (C)	-	500	-
cl 5.1, T-1, Note-3(N2)	-	500	-
cl 5.1, T-1, designation For GP (P)	-	500	-
cl 5.1, T-1, designation For GP (S)	-	500	-
cl 5.1, T-1, designation For GP (Mn)	-	500	-
cl 5.1, T-1, designation For GP (C)	-	500	-
Cl.15.1.3.1(Overall width after corrugation)	-	300	-
Cl.15.1.3.1(Overall width before corrugation)	-	300	-
Cl. 9(Surface roughness)	-	100	-
Cl 14(Length, Width & Thickness)	-	300	-
Cl 13(Weight)	-	100	-
Cl 12(Workmanship)	-	100	-
Cl 10(Galvanising Test)	-	500	-
Cl 8.2(Press)	-	100	-
Cl 8.1(UTM)	-	1500	-
Cl 8.1(UTM)	-	1500	-
Cl 8.2(Press)	-	100	-
Cl 10(Galvanising Test)	-	1500	-
Cl 12(Workmanship)	-	100	-
Cl 13(Weight)	-	100	-
Cl 14.1(Thickness of plain sheet ( average of 8))	-	300	-
5(Titanium as Ti)	-	500	-
5(Niobium as Nb)	-	500	-
5(Boron as B)	-	500	-
5(Micro Alloying Elements (Nb+V+Ti + B))	-	500	-
5(Copper as Cu)	-	500	-
6(Tensile Strength-IS:1608(P1))	-	500	-
6(Yield Strength-IS:1608(P1))	-	500	-
6(Elongation-IS:1608(P1))	-	500	-
7.1(Zinc Coating Conformation)	-	500	-
7.3(X-Ray fluorescence method)	-	500	-
7.6(Coating finish type)	-	500	-
7.7(Surface treatment)	-	100	-
8.3(Bend test miniral diameter)	-	1000	-
Cl. 5.1(Carbon)	-	500	-
Cl. 5.1(Sulphur)	-	500	-
Cl. 5.1(Phosphorous)	-	500	-
Cl. 5.1(Manganese)	-	500	-
Cl. 5.1(Silicon)	-	500	-
Cl. 5.1(Titanium)	-	500	-
Cl. 5.1(Nitrogen)	-	500	-
Cl-5.1(Aluminium)	-	500	-
Cl. 5.1(Copper)	-	500	-
Cl. 5.1(Boron)	-	500	-
Cl. 5.1(Niobium)	-	500	-
Cl. 5.1(Vanadium)	-	500	-
Cl. 5.1(Ti+Nb+V+B)	-	500	-

12 Jan, 2028

-
Included w.e.f 31.12.2025 Exclusion : Cl. 9 (Surface roughness)

3635

REACT COMPLIANCE AND TESTING LABORATORIES LLP, BENGALURU

6130526

IS 16242 : Part 1 (2025)

Uninterruptible power systems UPS Part 1 Safety requirements (first revision)

100000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.2(Fault and abnormal conditions)	-	5000	-
Cl-4.3(Short-circuit and overload protection)	-	5000	-
Cl-4.3.101(AC input current)	-	1000	-
Cl-4.3.104(Protection of the energy storage device)	-	1000	-
Cl-4.3.103(AC input short-circuit current)	-	5000	-
Cl-4.3.105(Unsynchronised load transfer)	-	1000	-
Cl-4.4(Protection against electric shock)	-	5000	-
Cl-4.4.2.2.2(Selection tables for contact area and skin humidity condition)	-	1000	-
Cl-4.4.3.3(Protection by means of enclosures or barriers- Openings)	-	5000	-
Cl-4.4.7.1.1(Influencing factors)	-	1000	-
Cl-4.4.7.1.3(Overvoltage category (OVC))	-	1000	-
Cl-4.4.7.7(PWB spacings for functional insulation)	-	1000	-
Cl-4.4.9(Capacitor discharge)	-	1000	-
Cl-4.5.2(Service access areas)	-	1000	-
Cl-4.6.2.2(Components within a circuit representing a fire hazard)	-	1000	-
Cl-4.6.3.1(General)	-	1000	-
Cl-4.6.3.2(Flammability of enclosure materials)	-	5000	-
Cl-4.6.3.3.2(Openings in the top and side of fire enclosures)	-	5000	-
Cl-4.6.4.1(Temperature limits- Internal parts)	-	5000	-
Cl- 4.6.5(Limited power sources)	-	5000	-
Cl-4.7(Protection against mechanical hazards)	-	1000	-
Clause 4(Protection against hazards)	-	1000	-
Cl-4.7.101(Protection in service access area)	-	1000	-
Cl-4.8 .101(Equipment with multiple sources of supply- General)	-	1000	-
Clause 5(Test requirements)	-	1000	-
Clause 5.2.2(Mechanical tests)	-	1000	-
Clause 5.2.3(Electrical tests)	-	1000	-
Cl-4.9(Protection against environmental stresses)	-	1000	-
Cl-4.10(Protection against sonic pressure hazards)	-	1000	-
Clause 5.2.4("Abnormal operation tests")	-	1000	-
Cl-4.11(Wiring and connections)	-	1000	-
Clause 5.2.5(Material tests)	-	1000	-
Clause 5.2.6(Environmental tests)	-	1000	-
Cl-4.11.101.1(Non-detachable cords- Cord guard)	-	1000	-
Clause 5.2.7(Hydrostatic pressure test)	-	1000	-
Cl-4.11.101.2(Cord anchorages and strain relief)	-	1000	-
Clause 6(Information and marking requirements)	-	1000	-
Cl-4.101.1(Emergency switching (disconnect) device)	-	1000	-
Clause 6.1.101(Durability)	-	1000	-
Cl-4.101.2(Normal disconnect devices)	-	1000	-
Cl-4.102.1(Stored energy source- General)	-	1000	-
Cl-4.102.2(Accessibility and maintainability)	-	1000	-
Cl-4.102.3(Distance between battery cells)	-	5000	-
Cl- 4.102.5(Electrolyte spillage)	-	1000	-
Cl- 4.102.6(Ventilation and hydrogen concentration)	-	1000	-
Cl- 4.102.8.1(Overcurrent and earth fault protection)	-	5000	-
Cl- 4.102.8.2(Location of protective devices)	-	5000	-
Cl-4.102.8.3(Rating of protective devices)	-	5000	-
Cl-4.103(UPS connection to telecommunication lines)	-	5000	-
Cl-5.1.5.3(Operating parameters for tests)	-	5000	-
Cl-5.1.7(Test overview)	-	5000	-
Cl-5.2.2.2(Non-accessibility test)	-	5000	-
Cl-5.2.2.4.4(Drop test)	-	5000	-
Cl-4.8.102(Backfeed protection)	-	5000	-
Cl- 4.102.7(Charging voltages)	-	5000	-
Cl-5.2.2.6.101(Wall or ceiling mounted equipment test)	-	5000	-
Cl-5.2.2.6.102(Rack mounted equipment test)	-	5000	-
Cl-5.2.2.101(Cord guard test)	-	5000	-
Cl-5.2.3.9(Limited power source test)	-	5000	-
Cl-5.2.3.10(Temperature rise test)	-	5000	-
Cl-5.2.3.101.1(Backfeed protection test- General)	-	5000	-
Cl-5.2.3.101.2(Test for pluggable UPS)	-	5000	-
Cl-5.2.3.101.3(Test for permanently connected UPS)	-	5000	-
Cl-5.2.3.101.4(Method to simulate the load-induced change of reference potential for pluggable UPS)	-	5000	-
Cl-5.2.3.101.5(Solid-state backfeed protection)	-	5000	-
Cl-5.2.3.102(Input current test)	-	5000	-
Cl-5.2.3.103(Short-time withstand current test)	-	5000	-
Cl-5.2.3103.3(Input port short-time withstand current rating)	-	5000	-
Cl-5.2.3.104(Transformer protection test)	-	5000	-
Cl- 5.2.3.105(Unsynchronised load transfer test)	-	5000	-
Cl-5.2.4.1(Abnormal operation and simulated faults tests- General)	-	5000	-
Cl-5.2.6.4(Vibration test)	-	5000	-
Cl-5.2.6.5(Salt mist test)	-	0	-
Cl-5.2.6.6(Dust and sand test)	-	0	-
Cl-6(Information and marking requirements)	-	1000	-
Cl-4.3.102(Transformer protection)	-	1000	-
Cl-4.4.7.1.2(Pollution degree)	-	1000	-
Cl-4.6(Protection against fire and thermal hazards)	-	1000	-
Cl-4.2(Fault and abnormal conditions)	-	5000	-
Cl-4.3(Short-circuit and overload protection)	-	5000	-
Cl-4.3.101(AC input current)	-	5000	-
Cl-4.3.104(Protection of the energy storage device)	-	5000	-
Cl-4.3.103(AC input short-circuit current)	-	5000	-
Cl-4.3.105(Unsynchronised load transfer)	-	5000	-
Cl-4.4(Protection against electric shock)	-	5000	-
Cl-4.4.2.2.2(Selection tables for contact area and skin humidity condition)	-	5000	-
Cl-4.4.3.3(Protection by means of enclosures or barriers- Openings)	-	5000	-
Cl-4.4.7.1.1(Influencing factors)	-	5000	-
Cl-4.4.7.1.3(Overvoltage category (OVC))	-	5000	-
Cl-4.4.7.7(PWB spacings for functional insulation)	-	5000	-
Cl-4.4.9(Capacitor discharge)	-	5000	-
Cl-4.5.2(Service access areas)	-	5000	-
Cl-4.6.2.2(Components within a circuit representing a fire hazard)	-	5000	-
Cl-4.6.3.1(General)	-	5000	-
Cl-4.6.3.2(Flammability of enclosure materials)	-	5000	-
Cl-4.6.3.3.2(Openings in the top and side of fire enclosures)	-	5000	-
Cl-4.6.4.1(Temperature limits- Internal parts)	-	5000	-
Cl- 4.6.5(Limited power sources)	-	5000	-
Cl-4.7(Protection against mechanical hazards)	-	5000	-
Clause 4(Protection against hazards)	-	5000	-
Cl-4.7.101(Protection in service access area)	-	5000	-
Cl-4.8 .101(Equipment with multiple sources of supply- General)	-	5000	-
Clause 5(Test requirements)	-	5000	-
Clause 5.2.2(Mechanical tests)	-	5000	-
Clause 5.2.3(Electrical tests)	-	5000	-
Cl-4.9(Protection against environmental stresses)	-	5000	-
Cl-4.10(Protection against sonic pressure hazards)	-	5000	-
Clause 5.2.4("Abnormal operation tests")	-	5000	-
Cl-4.11(Wiring and connections)	-	5000	-
Clause 5.2.5(Material tests)	-	5000	-
Clause 5.2.6(Environmental tests)	-	5000	-
Cl-4.11.101.1(Non-detachable cords- Cord guard)	-	5000	-
Clause 5.2.7(Hydrostatic pressure test)	-	5000	-
Cl-4.11.101.2(Cord anchorages and strain relief)	-	5000	-
Clause 6(Information and marking requirements)	-	5000	-
Cl-4.101.1(Emergency switching (disconnect) device)	-	5000	-
Clause 6.1.101(Durability)	-	5000	-
Cl-4.101.2(Normal disconnect devices)	-	5000	-
Cl-4.102.1(Stored energy source- General)	-	5000	-
Cl-4.102.2(Accessibility and maintainability)	-	5000	-
Cl-4.102.3(Distance between battery cells)	-	5000	-
Cl- 4.102.5(Electrolyte spillage)	-	5000	-
Cl- 4.102.6(Ventilation and hydrogen concentration)	-	5000	-
Cl- 4.102.8.1(Overcurrent and earth fault protection)	-	5000	-
Cl- 4.102.8.2(Location of protective devices)	-	5000	-
Cl-4.102.8.3(Rating of protective devices)	-	5000	-
Cl-4.103(UPS connection to telecommunication lines)	-	5000	-
Cl-5.1.5.3(Operating parameters for tests)	-	5000	-
Cl-5.1.7(Test overview)	-	5000	-
Cl-5.2.2.2(Non-accessibility test)	-	5000	-
Cl-5.2.2.4.4(Drop test)	-	5000	-
Cl-4.8.102(Backfeed protection)	-	5000	-
Cl- 4.102.7(Charging voltages)	-	5000	-
Cl-5.2.2.6.101(Wall or ceiling mounted equipment test)	-	5000	-
Cl-5.2.2.6.102(Rack mounted equipment test)	-	5000	-
Cl-5.2.2.101(Cord guard test)	-	5000	-
Cl-5.2.3.9(Limited power source test)	-	5000	-
Cl-5.2.3.10(Temperature rise test)	-	5000	-
Cl-5.2.3.101.1(Backfeed protection test- General)	-	5000	-
Cl-5.2.3.101.2(Test for pluggable UPS)	-	5000	-
Cl-5.2.3.101.3(Test for permanently connected UPS)	-	5000	-
Cl-5.2.3.101.4(Method to simulate the load-induced change of reference potential for pluggable UPS)	-	5000	-
Cl-5.2.3.101.5(Solid-state backfeed protection)	-	5000	-
Cl-5.2.3.102(Input current test)	-	5000	-
Cl-5.2.3.103(Short-time withstand current test)	-	5000	-
Cl-5.2.3103.3(Input port short-time withstand current rating)	-	5000	-
Cl-5.2.3.104(Transformer protection test)	-	5000	-
Cl- 5.2.3.105(Unsynchronised load transfer test)	-	5000	-
Cl-5.2.4.1(Abnormal operation and simulated faults tests- General)	-	5000	-
Cl-5.2.6.4(Vibration test)	-	5000	-
Cl-5.2.6.5(Salt mist test)	-	5000	-
Cl-5.2.6.6(Dust and sand test)	-	5000	-
Cl-6(Information and marking requirements)	-	5000	-
Cl-4.3.102(Transformer protection)	-	5000	-
Cl-4.4.7.1.2(Pollution degree)	-	5000	-
Cl-4.6(Protection against fire and thermal hazards)	-	5000	-

10 Mar, 2027

-
Included w.e.f 19.12.2025 Exclusion: Cl 5.2.5.2 - High current arcing ignition test, Cl-5.2.3.101.5 (Solid-state backfeed protection) , Cl-5.2.3.103 (Short-time withstand current test) (Products with Icw/Icc exceeding 10kA is not accepted for testing.)

3636

Ratlam Smart Laboratory (IOCL)

8192614

IS 1460 (2025)

Automotive Diesel Fuel - Specification (seventh revision)

17790 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3.1.4 , 3.2, Table-1 (i)(Appearance)	-	200	-
Cl-3.1.4 , 3.2, Table-1 (vi)(Cetane index, Min)	-	0.00	-
Cl-3.1.4 , 3.2, Table-1 (vii) (a)(Pour point3, °C, Max: Winter)	-	1900	-
Cl-3.1.4 , 3.2, Table-1 (vii) (b)(Pour point3, °C, Max: Summer)	-	1900	-
Cl-3.1.4 , 3.2, Table-1 (viii)(Copper strip corrosion for 3 h at 50 °C, Max)	-	1130	-
Cl-3.1.4 , 3.2, Table-1 (ix)(Distillation, 95 percent v/v recovery, °C, Max)	-	2650	-
Cl-3.1.4 , 3.2, Table-1 (x)(Flash point, Abel4, °C, Min)	-	1900	-
Cl-3.1.4 , 3.2, Table-1 (xi)(Kinematic viscosity, mm2/s, at 40 °C)	-	2270	-
Cl-3.1.4 , 3.2, Table-1 (xiii)(Density at 15 °C, kg/m3)	-	1130	-
Cl-3.1.4 , 3.2, Table-1 (xiv)(Total sulphur, mg/kg, Max)	-	4710	-

05 Dec, 2028

-
Excluding: Cl-3.1 (General- Requirements) Cl-3.2 (Composition) Cl-3.1.4 , 3.2, Table-1 (ii) C (Total Acid Number (TAN), mg of KOH/g, Max) Cl-3.1.4 , 3.2, Table-1 (iii) (Ash, percent by mass, Max) Cl-3.1.4 , 3.2, Table-1 (iv) (Carbon residue, on 10 percent residue, percent by mass, Max) Cl-3.1.4 , 3.2, Table-1 (v) (Cetane number, Min) Cl-3.1.4 , 3.2, Table-1 (xii) (Total contamination, mg/kg, Max) Cl-3.1.4 , 3.2, Table-1 (xv) (Water content, mg/kg, Max) Cl-3.1.4 , 3.2, Table-1 (xvi) (a) (Cold Filter Plugging Point (CFPP), °C, Max: Winter) Cl-3.1.4 , 3.2, Table-1 (xvii) (Oxidation stability, g/m3, Max) Cl-3.1.4 , 3.2, Table-1 (xvii) (Oxidation stability, minutes, Min) Cl-3.1.4 , 3.2, Table-1 (xviii) (Oxidation stability (for diesel fuel having FAME content of above 2 percent v/v), hours, Min) Cl-3.1.4 , 3.2, Table-1 (xviii) (Oxidation stability (for diesel fuel having FAME content of above 2 percent v/v), minutes, Min) Cl-3.1.4 , 3.2, Table-1 (xix) (Polycyclic Aromatic Hydrocarbon (PAH), percent by mass, Max) Cl-3.1.4 , 3.2, Table-1 (xx) (Lubricity, wear scar diameter (wsd) at 60 ºC, μm, Max) Cl-3.1.4 , 3.2, Table-1 (xxi) (FAME content, percent v/v, Max) Cl-5.2 (Marking) Cl-3.1.4 , 3.2, Table-1 (xvi) (b) (Cold Filter Plugging Point (CFPP), °C, Max: Summer)

3637

Ratlam Smart Laboratory (IOCL)

8192614

IS 2796 (2017)

Motor gasoline - Specification (Sixth Revision)

12780 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (i)(Appearance)	-	200	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ii), a)("Colour: MG 91")	-	200	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ii), b)("Colour: MG 95")	-	0	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iii)(Density at 15°C, kg/m³)	-	1130	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (a)(percent evaporated at 70°C (E 70°C), percent v/v: Motor gasoline)	-	0	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (a)(percent evaporated at 70°C (E 70°C), percent v/v: E10)	-	0	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (b)(percent evaporated at 100°C (E 100 °C), percent v/v)	-	0	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (c)(percent evaporated at 150°C (E 150 °C), percent v/v, Min)	-	0	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (d)(Final boiling point, °C, Max)	-	2650	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (e)(Residue, percent by volume, Max)	-	0	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (vii)(Gum content (Solvent washed), g/m3, Max)	-	2070	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (viii)(Total sulphur, mg/kg, Max)	-	4710	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xx)(Ethanol content, percent by volume: a) Motor gasoline)	-	690	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xiii)(Copper strip corrosion, for 3 h at 50°C, Max)	-	1130	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xx)(Ethanol content, percent by volume: a):- E10)	-	0	-

05 Dec, 2028

-
Excluding: Cl-4.1 (General- Requirements) Cl-4.1.2 (Antioxidants) Cl-4.1.3 (Metal Deactivators) Cl-4.1.5 (Motor gasoline multifunctional additives (MFA),) Cl-4.2.1 (Organic Oxygenates- Permitted Components) Cl-4.3 (Other Requirements) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (v) (a) (Research octane number (RON), Min: MG 91) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (v) (b) (Research octane number (RON), Min: MG 95) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (vi) (a) (Motor octane number (MON),Min: MG 91) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (vi) (b) (Motor octane number (MON),Min: MG 95) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ix) (Lead content (as Pb ), g/l, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (x) (a) (Reid vapour pressure (RVP) at 38°C, kPa , Max: MG(without ethanol)) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (x) (b) (Reid vapour pressure (RVP) at 38°C, kPa , Max: Ethanol blended MG) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xi) (a) (Vapour lock index (VLI),Max :- MG (without ethanol)) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xi) (b) (Vapour lock index (VLI),Max :- MG (with 5 percent v/v ethanol)) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xi) (c) (Vapour lock index (VLI),Max :- E10) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xii) (Benzene content, percent by volume, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xiv) (a) (Water tolerance of motor gasoline-alcohol blends, temperature for phase separation:- Winter, °C, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xiv) (b) (Water tolerance of motor gasoline-alcohol blends, temperature for phase separation:- Other months, °C, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xv) (Engine intake system cleanliness) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xvi) (a) (Olefin content, percent by volume, Max: MG 91) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xvi) (b) (Olefin content, percent by volume, Max :MG 95) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xvii) (Oxidation stability, minutes, Min) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xviii) (Aromatics content, percent by volume, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ixi) (Oxygen content, percent by mass, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (XXI) (Oxygenates percent by volume, Max:- Ethers containing 5 or more ‘C’ atoms per molecules such as MTBE, ETBE or TAME) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (XXI) (Oxygenates percent by volume, Max) Cl-5.2 (Markeing)

3638

MANMAD LABORATORY (IOCL)

7195514

IS 2796 (2017)

Motor gasoline - Specification (Sixth Revision)

12780 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (i)(Appearance)	-	200	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ii), a)("Colour: MG 91")	-	200	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xiii)(Copper strip corrosion, for 3 h at 50°C, Max)	-	1130	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iii)(Density at 15°C, kg/m³)	-	1130	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (a)(percent evaporated at 70°C (E 70°C), percent v/v: Motor gasoline)	-	2650	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (a)(percent evaporated at 70°C (E 70°C), percent v/v: E10)	-	0	Testing charges Included in percent evaporated at 70°C (E 70°C), percent v/v: Motor gasoline
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (b)(percent evaporated at 100°C (E 100 °C), percent v/v)	-	0	Testing charges Included in percent evaporated at 70°C (E 70°C), percent v/v: Motor gasoline
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (c)(percent evaporated at 150°C (E 150 °C), percent v/v, Min)	-	0	Testing charges Included in percent evaporated at 70°C (E 70°C), percent v/v: Motor gasoline
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (d)(Final boiling point, °C, Max)	-	0	Testing charges Included in percent evaporated at 70°C (E 70°C), percent v/v: Motor gasoline
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (e)(Residue, percent by volume, Max)	-	0	Testing charges Included in percent evaporated at 70°C (E 70°C), percent v/v: Motor gasoline
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (vii)(Gum content (Solvent washed), g/m3, Max)	-	2070	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (viii)(Total sulphur, mg/kg, Max)	-	4710	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xx)(Ethanol content, percent by volume: a) Motor gasoline)	-	690	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xx)(Ethanol content, percent by volume: a):- E10)	-	0	Testing charges Included in Ethanol content, percent by volume: a) Motor gasoline
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ii), b)("Colour: MG 95")	-	0	Testing charges Included in Color : MG 91"

08 Jan, 2029

3639

MANMAD LABORATORY (IOCL)

7195514

IS 15464 (2022)

ANHYDROUS ETHANOL FOR USE AS BLENDING COMPONENT IN MOTOR GASOLINE SPECIFICATION First Revision

10460 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3(Acidity)	-	400	-
4.4-Table 1-x)(Aldehyde (as CH3 CHO) content, mg/l, Max)	-	1900	-
4.4-Table 1-ix)(Alkalinity, mg/kg, Max.)	-	0	INCLUDED WITH ACIDITY
4.4-Table 1-i)(Appearance)	-	200	-
4.4-Table 1-iii)(Ethanol, percent, v/v, Min1)). (excluding denaturant))	-	1340	-
4.4-Table 1-iv)(Ethanol, percent, v/v, Min1). (excluding denaturant))	-	0	Testing charge included in Ethanol, percent, v/v, Min1)). (excluding denaturant) , 4.4- table 1-iii
4.4-Table 1-xix)(Miscibility with water)	-	380	-
4.4-Table 1-ii)(Relative density at 15.6/15.6 °C, Max)	-	1130	-
4.4-Table 1-xv)(Sulfur content, mg/kg, Max.)	-	4710	-
4.4-Table 1-viii)(Acidity (as CH3 COOH), mg/kg, Max.)	-	400	-

08 Jan, 2029

-
Excluding: 4.1 (Description) 4.2 (Denaturant) 4.4-Table 1-v) (Higher saturated alcohols (C3-C5), percent, v/v, Max) 4.4-Table 1-vi) (Boiling point, °C, Min.) 4.4-Table 1-vii) (Residue on evaporation, percent by mass, Max.) 4.4-Table 1-xi) (Electrical conductivity, µS/m, Max) 4.4-Table 1-xii) (Copper, mg/kg, Max.) 4.4-Table 1-xiii) (pHe) 4.4-Table 1-xiv) (Inorganic chloride, mg/kg, Max.) 4.4-Table 1-xvi) (Sulphate content, mg/kg Max.) 4.4-Table 1-xvii) (Water content, percent v/v, Max.) 4.4-Table 1-xviii) (Hydrocarbons, percent v/v) 5.1 (Packing) 5.2 (Marking) 7.1 (Tests shall be conducted) 4.4-Table 1 iv (Methanol)

3640

Rajkot Metlab Services LLP, Rajkot

7183706

IS 2501 (1995)

Solid drawn copper tubesfor general engineering purposes - Specification (Third Revision)

All Grade / Type / Size / Designation

9950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No.5(Grades)	-	100	-
Cl. No.6(CONDITION)	-	100	-
Cl. No. 7(FREEDOM FROM DEFECTS)	-	100	-
Cl. No. 8.1(Dimensions)	-	300	-
Cl. No. 8.2(Tolerances)	-	100	-
Cl. No. 9(CHEMICAL COMPOSITION)	-	3500	-
Cl. No. 10.1.1, Table no. 1(Tensile Test)	-	1000	-
Cl. No. 10.2(Flattening and Doubling-Over Test)	-	1000	-
Cl. No. 10.3(Drift Expanding Test)	-	1000	-
Cl. No. 10.4(Non-Destructive Testing)	-	1000	-
Cl. No. 10.5("Microscopic Examination ( for 0 Condition Only )")	-	1000	-
Cl. No. 13(Marking)	-	100	-
10.6(Hydrogen Embrittlement Test)	-	3500	-
Cl. No.5(Grades)	-	-	-
Cl. No.6(CONDITION)	-	-	-
Cl. No. 7(FREEDOM FROM DEFECTS)	-	-	-
Cl. No. 8.1(Dimensions)	-	-	-
Cl. No. 8.2(Tolerances)	-	-	-
Cl. No. 9(CHEMICAL COMPOSITION)	-	-	-
Cl. No. 10.1.1, Table no. 1(Tensile Test)	-	-	-
Cl. No. 10.2(Flattening and Doubling-Over Test)	-	-	-
Cl. No. 10.3(Drift Expanding Test)	-	-	-
Cl. No. 10.4(Non-Destructive Testing)	-	-	-
Cl. No. 10.5("Microscopic Examination ( for 0 Condition Only )")	-	-	-
Cl. No. 13(Marking)	-	-	-
10.6(Hydrogen Embrittlement Test)	-	-	-

12 Jan, 2028

-
1. 10.6 (Hydrogen Embrittlement Test) Hydrogen Embrittlement Test In accordance with Clause 11 of IS 2501, the Hydrogen Embrittlement Test is required to ensure the suitability of copper for heating in a reducing atmosphere. This test is excluded from the current scope as the chemical composition (Clause 7) confirms the material grade as [Insert Grade, e.g., ETP], and the tubes are intended for applications where high-temperature hydrogen exposure is not a service condition.

3641

Eastern Regional Laboratory (IOCL), Howrah Terminal

5192414

IS 2796 (2017)

Motor gasoline - Specification (Sixth Revision)

30300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iii)(Density at 15°C, kg/m³)	-	1130	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (a)(percent evaporated at 70°C (E 70°C), percent v/v: Motor gasoline)	-	2650	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (a)(percent evaporated at 70°C (E 70°C), percent v/v: E10)	-	2650	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (b)(percent evaporated at 100°C (E 100 °C), percent v/v)	-	2650	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (c)(percent evaporated at 150°C (E 150 °C), percent v/v, Min)	-	2650	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (d)(Final boiling point, °C, Max)	-	2650	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (e)(Residue, percent by volume, Max)	-	2650	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (v) (a)(Research octane number (RON), Min: MG 91)	-	18210	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (v) (b)(Research octane number (RON), Min: MG 95)	-	18210	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (vii)(Gum content (Solvent washed), g/m3, Max)	-	2070	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (viii)(Total sulphur, mg/kg, Max)	-	4710	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xx)(Ethanol content, percent by volume: a) Motor gasoline)	-	660	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xx)(Ethanol content, percent by volume: a):- E10)	-	660	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xiii)(Copper strip corrosion, for 3 h at 50°C, Max)	-	1130	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (i)(Appearance)	-	200	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ii), a)("Colour: MG 91")	-	200	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ii), b)("Colour: MG 95")	-	200	-

04 Dec, 2028

-
Cl-4.1 (General- Requirements) Cl-4.1.2 (Antioxidants) Cl-4.1.3 (Metal Deactivators) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ix) (Lead content (as Pb ), g/l, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ixi) (Oxygen content, percent by mass, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (vi) (a) (Motor octane number (MON),Min: MG 91) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (vi) (b) (Motor octane number (MON),Min: MG 95) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (x) (a) (Reid vapour pressure (RVP) at 38°C, kPa , Max: MG(without ethanol)) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (x) (b) (Reid vapour pressure (RVP) at 38°C, kPa , Max: Ethanol blended MG) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xi) (a) (Vapour lock index (VLI),Max :- MG (without ethanol)) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xi) (b) (Vapour lock index (VLI),Max :- MG (with 5 percent v/v ethanol)) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xi) (c) (Vapour lock index (VLI),Max :- E10) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xii) (Benzene content, percent by volume, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xiv) (a) (Water tolerance of motor gasoline-alcohol blends, temperature for phase separation:- Winter, °C, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xiv) (b) (Water tolerance of motor gasoline-alcohol blends, temperature for phase separation:- Other months, °C, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xv) (Engine intake system cleanliness) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xvi) (a) (Olefin content, percent by volume, Max: MG 91) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xvi) (b) (Olefin content, percent by volume, Max :MG 95) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xvii) (Oxidation stability, minutes, Min) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xviii) (Aromatics content, percent by volume, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (XXI) (Oxygenates percent by volume, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (XXI) (Oxygenates percent by volume, Max:- Ethers containing 5 or more ‘C’ atoms per molecules such as MTBE, ETBE or TAME) Cl-4.1.5 (Motor gasoline multifunctional additives (MFA),) Cl-4.2.1 (Organic Oxygenates- Permitted Components) Cl-4.3 (Other Requirements) Cl-5.2 (Markeing)

3642

Samridhi Test House Pvt. Ltd.

8184706

IS 13488 (2008)

Irrigation equipment - Emitting pipe systems - Specification (First Revision)

All Grade / Type / Size / Designation etc.

9400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Materials - shall be resistant to fertilizers and chemicals commonly employed in irrigation, and shall be suitable for use with water at temperatures up to 60°C and at pressures designed for the emitting pipe)	-	100	-
5.1.2 (Ref. Cl 4.1.a of IS 12786 : 1989)(Potyethylene - higher olefins constituent )	-	300	-
5.1.2 (Ref. Cl 4.1.b of IS 12786 : 1989)(Potyethylene - anti-oxidant)	-	100	-
5.1.2 (Ref. Cl 4.1.c.i of IS 12786 : 1989)(Density)	-	300	-
5.1.2 (Ref. Cl 4.1.c.ii of IS 12786 : 1989)(Toluene extract - Annex A of IS 12786:1989)	-	300	-
5.1.2 (Ref. Cl 4.1.c.iii of IS 12786 : 1989)(Volatile matter - Annex B of IS 12786:1989)	-	100	-
5.1.2 (Ref. Cl 4.1.c & 4.2.a of IS 12786 : 1989)(Carbon Black content - IS 2530 : 1963)	-	100	-
5.1.2 (Ref. Cl 4.2.b of IS 12786 : 1989)(The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	100	-
5.1.2 (Ref. Cl 4.3 of IS 12786 : 1989)(Addition of not more than 10 percent of the manufactures own rework material produced during the manufacture and works testing of pipe complying with this standard is permitted. No other rework material shall be used)	-	100	-
6.2.2(Fittings)	-	100	-
6.3(General)	-	100	-
6.3(General)	-	100	-
8.1.2(Uniformity of Emission Rate for Unregulated Emitting Pipes)	-	300	-
8.1.3(Uniformity of Emission Rate for Regulated Emitting Pipes)	-	300	-
8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure)	-	300	-
8.2.1(Unregu/Qt~d Emining Pipe)	-	100	-
8.2.2(Regulated Emitting Pipes)	-	200	-
8.3.1(Wall Thickness ofEmitting Pipe)	-	100	-
8.3.2(Inside Diameter ofEmitting Pipe)	-	100	-
8.3.3(Flow Paths in Emitting Unit)	-	100	-
8.4.1(Resistance to Hydrostatic Pressure at Ambient Temperature)	-	200	-
8.4.2(Resistance to Hydrostatic Pressure at Elevated Temperature)	-	300	-
8.5(Resistance to Tension at Elevated Temperature)	-	300	-
8.5(Resistance to Tension at Elevated Temperature)	-	100	-
8.5(Resistance to Tension at Elevated Temperature)	-	100	-
8.6(Resistance to Pull Out of Joints Between Fitting and Emitting IS 13479)	-	100	-
8.7.1(Resistance of PE Emitting Pipe to Environmental Stress Cracking -Acceptance Test Annex D of IS 12786)	-	200	-
8.7.2(Resistance of PE Emitting Pipe to Environmental Stress Cracking - Type Test Annex D of IS 12786)	-	200	-
8.8(Determination of Emitting Unit Exponent)	-	200	-
9.1(DESIGNATION - Non regulated Emitting Pipe)	-	100	-
9.2(DESIGNATION - Regulated Emitting Pipe)	-	100	-
4.1 a(Identification)	-	200	-
4.1 a(Identification)	-	200	-
4.1 c(Volatile matter Extract)	-	200	-
4.1 d(Density)	-	100	-
4.1 d(MFI @ 1900C/2.16 Kg)	-	100	-
4.2(Carbon black dispersion)	-	300	-
5.1(Materials)	-	100	-
6.1.1, Table 1,(i)(Nominal Diameter)	-	100	-
6.1.1, Table 1,(ii)(Inside Diameter)	-	100	-
6.1.1, Table 1,(iii)(Tolerance on I.D)	-	100	-
6.1.1, Table 1,(iv)(Wall Thickness)	-	100	-
6.2(Fittings)	-	100	-
6.3(General)	-	100	-
7.1(Test Specimens)	-	100	-
7.2(Order of Tests)	-	200	-
7.3(Testing Conditions)	-	100	-
7.4(Accuracy of Measuring Devices)	-	100	-
8.1(Uniformity of Emission Rate)	-	100	-
8.1.2(Unregulated Emitting Pipes)	-	100	-
8.1.3(Regulated Emitting Pipes)	-	100	-
8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure)	-	100	-
8.2.1(Unregulated Emitting Pipes)	-	100	-
8.2.2(Regulated Emitting Pipes)	-	100	-
8.3.1(Wall Thickness ofEmitting Pipe)	-	100	-
8.3.3(Flow Paths in Emitting Unit)	-	100	-
8.3.4(Spacing of Emitter Units)	-	100	-
8.4(Resistance of Emitting Pipes to Hydrostatic Pressure)	-	100	-
8.5(Resistance to Tension at Elevated Temperature)	-	100	-
8.6(Resistance to Pull Out ofJoints Between Fitting and Emitting)	-	100	-
8.7.1(Acceptance Test)	-	100	-
8.7.2(Type Test)	-	100	-
8.8(Determination of Emitting Unit Exponen)	-	100	-
9.1(Non-regulated Emitting Pipe)	-	100	-
9.2(Regulated Emitting Pipe)	-	100	-
10.1(Marking)	-	100	-
8.3.2(Inside Diameter ofEmitting Pipe)	-	100	-
4.2(Carbon black content)	-	100	-
8.3.4(Spacing ofEmitter Units)	-	100	-
5.1(Materials - shall be resistant to fertilizers and chemicals commonly employed in irrigation, and shall be suitable for use with water at temperatures up to 60°C and at pressures designed for the emitting pipe)	-	0	-
5.1.2 (Ref. Cl 4.1.a of IS 12786 : 1989)(Potyethylene - higher olefins constituent )	-	0	-
5.1.2 (Ref. Cl 4.1.b of IS 12786 : 1989)(Potyethylene - anti-oxidant)	-	0	-
5.1.2 (Ref. Cl 4.1.c.i of IS 12786 : 1989)(Density)	-	0	-
5.1.2 (Ref. Cl 4.1.c.ii of IS 12786 : 1989)(Toluene extract - Annex A of IS 12786:1989)	-	0	-
5.1.2 (Ref. Cl 4.1.c.iii of IS 12786 : 1989)(Volatile matter - Annex B of IS 12786:1989)	-	0	-
5.1.2 (Ref. Cl 4.1.c & 4.2.a of IS 12786 : 1989)(Carbon Black content - IS 2530 : 1963)	-	0	-
5.1.2 (Ref. Cl 4.2.b of IS 12786 : 1989)(The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	0	-
5.1.2 (Ref. Cl 4.3 of IS 12786 : 1989)(Addition of not more than 10 percent of the manufactures own rework material produced during the manufacture and works testing of pipe complying with this standard is permitted. No other rework material shall be used)	-	0	-
6.2.2(Fittings)	-	0	-
6.3(General)	-	0	-
6.3(General)	-	0	-
8.1.2(Uniformity of Emission Rate for Unregulated Emitting Pipes)	-	0	-
8.1.3(Uniformity of Emission Rate for Regulated Emitting Pipes)	-	0	-
8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure)	-	0	-
8.2.1(Unregu/Qt~d Emining Pipe)	-	0	-
8.2.2(Regulated Emitting Pipes)	-	0	-
8.3.1(Wall Thickness ofEmitting Pipe)	-	0	-
8.3.2(Inside Diameter ofEmitting Pipe)	-	0	-
8.3.3(Flow Paths in Emitting Unit)	-	0	-
8.4.1(Resistance to Hydrostatic Pressure at Ambient Temperature)	-	0	-
8.4.2(Resistance to Hydrostatic Pressure at Elevated Temperature)	-	0	-
8.5(Resistance to Tension at Elevated Temperature)	-	0	-
8.5(Resistance to Tension at Elevated Temperature)	-	0	-
8.5(Resistance to Tension at Elevated Temperature)	-	0	-
8.6(Resistance to Pull Out of Joints Between Fitting and Emitting IS 13479)	-	0	-
8.7.1(Resistance of PE Emitting Pipe to Environmental Stress Cracking -Acceptance Test Annex D of IS 12786)	-	0	-
8.7.2(Resistance of PE Emitting Pipe to Environmental Stress Cracking - Type Test Annex D of IS 12786)	-	0	-
8.8(Determination of Emitting Unit Exponent)	-	0	-
9.1(DESIGNATION - Non regulated Emitting Pipe)	-	0	-
9.2(DESIGNATION - Regulated Emitting Pipe)	-	0	-
4.1 a(Identification)	-	0	-
4.1 a(Identification)	-	0	-
4.1 c(Volatile matter Extract)	-	0	-
4.1 d(Density)	-	0	-
4.1 d(MFI @ 1900C/2.16 Kg)	-	0	-
4.2(Carbon black dispersion)	-	0	-
5.1(Materials)	-	0	-
6.1.1, Table 1,(i)(Nominal Diameter)	-	0	-
6.1.1, Table 1,(ii)(Inside Diameter)	-	0	-
6.1.1, Table 1,(iii)(Tolerance on I.D)	-	0	-
6.1.1, Table 1,(iv)(Wall Thickness)	-	0	-
6.2(Fittings)	-	0	-
6.3(General)	-	0	-
7.1(Test Specimens)	-	0	-
7.2(Order of Tests)	-	0	-
7.3(Testing Conditions)	-	0	-
7.4(Accuracy of Measuring Devices)	-	0	-
8.1(Uniformity of Emission Rate)	-	0	-
8.1.2(Unregulated Emitting Pipes)	-	0	-
8.1.3(Regulated Emitting Pipes)	-	0	-
8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure)	-	0	-
8.2.1(Unregulated Emitting Pipes)	-	0	-
8.2.2(Regulated Emitting Pipes)	-	0	-
8.3.1(Wall Thickness ofEmitting Pipe)	-	0	-
8.3.3(Flow Paths in Emitting Unit)	-	0	-
8.3.4(Spacing of Emitter Units)	-	0	-
8.4(Resistance of Emitting Pipes to Hydrostatic Pressure)	-	0	-
8.5(Resistance to Tension at Elevated Temperature)	-	0	-
8.6(Resistance to Pull Out ofJoints Between Fitting and Emitting)	-	0	-
8.7.1(Acceptance Test)	-	0	-
8.7.2(Type Test)	-	0	-
8.8(Determination of Emitting Unit Exponen)	-	0	-
9.1(Non-regulated Emitting Pipe)	-	0	-
9.2(Regulated Emitting Pipe)	-	0	-
10.1(Marking)	-	0	-
8.3.2(Inside Diameter ofEmitting Pipe)	-	0	-
4.2(Carbon black content)	-	0	-
8.3.4(Spacing ofEmitter Units)	-	0	-

-
Included w.e.f 12.11.2025

3643

MANMAD LABORATORY (IOCL)

7195514

IS 17021 (2018)

E 20 fuel - Admixture of anhydrous ethanol and gasoline - As fuel for spark ignited engine powered vehicles - Specification

12780 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2-Table 1-i)(Appearance)	-	200	-
4.2-Table 1-iii)(Density at 15°C, kg/m3)	-	1130	-
4.2-Table 1-iv)(Distillation a) percent evaporated at 70 °C (E70 °C), percent v/v b) percent evaporated at 100 °C (E100 °C), percent v/v c) percent evaporated at 150 °C (E150 °C ), percent v/v, Min d) Final Boiling Point, °C, Max e) Residue, percent by volume, Max)	-	2650	-
4.2-Table 1-vii)(Gum content (Solvent washed), g/m3 , Max)	-	2070	-
4.2-Table 1-viii)(Total Sulphur, mg/kg, Max)	-	4710	-
4.2-Table 1-xiii)(Copper strip corrosion (3 h at 50 °C), Max)	-	1130	-
4.2-Table 1-xx)(Ethanol content6), percent, v/v)	-	690	-
4.3(Ethanol Content)	-	0	Testing charges included in Ethanol content6), percent, v/v
4.2-Table 1-ii)(Colour)	-	200	-

08 Jan, 2029

-
Excluding: 4.1 (Description) 4.2-Table 1-v) (Research Octane Number (RON), Min) 4.2-Table 1-vi) (Motor Octane Number (MON), Min) 4.2-Table 1-ix) (Lead Content (as Pb), g/l, Max) 4.2-Table 1-x) (Reid Vapour pressure at 38°C, kPa, Max) 4.2-Table 1-xi) (Vapour Lock Index (VLI), Max a) Summer2) b) Other Months) 4.2-Table 1-xii) (Benzene content, percent by volume, Max) 4.2-Table 1-xiv) (Water tolerance of gasoline-alcohol blends, temperature for phase separation, °C, Max a) other months b) Winter3)) 4.2-Table 1-xv) (Engine intake system cleanliness) 4.2-Table 1-xvi) (Olefin content, percent by volume, Max) 4.2-Table 1-xvii) (Oxidation stability, minutes, Min) 4.2-Table 1-xviii) (Aromatic content5), percent by volume, Max) 4.2-Table 1-xix) (Oxygen content, percent by mass, Max) 4.2-Table 1-xxi) (Oxygenates percent by volume, Max a) Ethers containing 5 or more “C” atoms per molecules such as MTBE, ETBE or TAME b) Any other oxygenates) 4.2-Table 1-xxii) (Motor Gasoline Content, percent, v/v) 4.4 (Organic Oxygenates) 4.5 (Phosphorous) 6.1 (Packing) 6.2 (Marking) 4.2-Table 1-xxiii (Amendment No.3) (Water content)

3644

Atckon Laboratories LLP, Bahadurgarh

8186436

IS 617 (2024)

Aluminium and Aluminium Alloys Ingots for Remelting and Castings for General Engineering Purposes â Specification (Fourth Revision)

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6.1, Table-1(Si)	-	14500	-
Cl-6.1, Table-1(Fe)	-	14500	-
Cl-6.1, Table-1(Cu)	-	14500	-
Cl-6.1, Table-1(Mn)	-	14500	-
Cl-6.1, Table-1(Mg)	-	14500	-
Cl-6.1, Table-1(Cr)	-	14500	-
Cl-6.1, Table-1(Ni)	-	14500	-
Cl-6.1, Table-1(Zn)	-	14500	-
Cl-6.1, Table-1(Pb)	-	14500	-
Cl-6.1, Table-1(Sn)	-	14500	-
Cl-6.1, Table-1(Ti)	-	14500	-
Cl-6.1, Table-1(Others elements Each)	-	14500	-
Cl-6.1, Table-1(Others elements Total)	-	14500	-
Cl-6.1, Table-1(Aluminium)	-	14500	-
Cl-6.2(The chemical analysis)	-	14500	-
Cl-7.1, Table-2(Sand-Cast Alloys- Tensile Strength)	-	14500	-
Cl-7.1, Table-2(Sand-Cast Alloys- Proof Stress)	-	14500	-
Cl-7.1, Table-2(Sand-Cast Alloys- Elongation)	-	14500	-
Cl-7.1, Table-2(Sand-Cast Alloys- Brinell Hardness HBW)	-	14500	-
Cl-7.1, Table-3(Chill Cast Alloys- Tensile Strength)	-	14500	-
Cl-7.1, Table-3(Chill Cast Alloys- Proof Stress)	-	14500	-
Cl-7.1, Table-3(Chill Cast Alloys- Elongation)	-	14500	-
Cl-7.1, Table-3(Chill Cast Alloys- Brinell Hardness HBW)	-	14500	-
Cl-7.1, Table-4(Investment-Cast Alloys- Tensile Strength)	-	14500	-
Cl-7.1, Table-4(Investment-Cast Alloys- Proof Stress)	-	14500	-
Cl-7.1, Table-4(Investment-Cast Alloys- Elongation)	-	14500	-
Cl-7.1, Table-4(Investment-Cast Alloys-Brinell Hardness)	-	14500	-
Cl-7.2(Tensile Tests)	-	14500	-
Cl-7.3(Test Pieces)	-	14500	-
Cl-7.4(Hardness)	-	14500	-
Cl-8(Freedom from Defects)	-	14500	-
Cl-11(RETEST)	-	14500	-
Cl-13(Marking)	-	14500	-
Cl. 6(Silicon)	-	14500	-
Cl. 6(Iron)	-	14500	-
Cl. 6(Copper)	-	14500	-
Cl. 6(Manganese)	-	14500	-
Cl. 6(Magnesium)	-	14500	-
Cl. 6(Chromium)	-	14500	-
Cl. 6(Nickel)	-	14500	-
Cl. 6(Zinc)	-	14500	-
Cl. 6(Lead)	-	14500	-
Cl. 6(Tin)	-	14500	-
Cl. 6(Titanium)	-	14500	-
Cl. 6(Others Element Each)	-	14500	-
Cl. 6(Others Element Total)	-	14500	-
Cl. 6(Aluminium)	-	14500	-
Cl. 6(Silver)	-	14500	-
Cl. 6(Zirconium)	-	14500	-
Cl. 6(Titanium+Zirconium)	-	14500	-
Cl. 6(Antimony)	-	14500	-
Cl. 6(Cobalt)	-	14500	-
Cl. 6(Antimony+Cobalt)	-	14500	-
Cl. 6(Beryllium)	-	14500	-
10(Pressure Test)	-	14500	-

-
Included w.e.f. 09.10.2025

3645

Rajkot Metlab Services LLP, Rajkot

7183706

IS 21 (2025)

Wrought Aluminium and Aluminium Alloys for Manufacture of Utensils - Specification (Fifth Revision)

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General requirements)	-	100	-
Cl-5.1(Material)	-	100	-
Cl-5.2(Chemical composition and mechanical properties of grades in Cl 5.1)	-	3000	-
Cl-5.3.1 a("Wrought Aluminium (with Minimum 99 Percent Al Content)- Iron+ Silicon")	-	500	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Chromium")	-	500	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Magnesium")	-	500	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Manganese")	-	500	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Nickel")	-	500	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Zinc")	-	500	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Titanium")	-	500	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Tin")	-	500	-
Cl-5.3.1 c("Wrought Aluminium (with Minimum 99 Percent Al Content)- Copper")	-	500	-
Cl-5.3.1 Note 1("Wrought Aluminium (with Minimum 99 Percent Al Content)- Aluminium")	-	500	-
Cl-5.3.1 d("Wrought Aluminium (with Minimum 99 Percent Al Content)- Others")	-	500	-
Cl-5.3.2, Table-1 (i)(Wrought Aluminium Alloys-Silicon)	-	500	-
Cl-5.3.2, Table-1 (ii)(Wrought Aluminium Alloys-Iron)	-	500	-
Cl-5.3.2, Table-1 (iii)(Wrought Aluminium Alloys-Copper)	-	500	-
Cl-5.3.2, Table-1 (iv)(Wrought Aluminium Alloys-Manganese)	-	500	-
Cl-5.3.2, Table-1 (v)(Wrought Aluminium Alloys-Magnesium)	-	500	-
Cl-5.3.2, Table-1 (vi)(Wrought Aluminium Alloys-Chromium)	-	500	-
Cl-5.3.2, Table-1 (vii)(Wrought Aluminium Alloys-Nickel)	-	500	-
Cl-5.3.2, Table-1 (viii)(Wrought Aluminium Alloys-Zinc)	-	500	-
Cl-5.3.2, Table-1 (ix)(Wrought Aluminium Alloys -Zirconium)	-	500	-
Cl-5.3.2, Table-1 (x)(Wrought Aluminium Alloys - Titanium)	-	500	-
Cl-5.3.2, Table-1 (Note 3)(Wrought Aluminium Alloys- Aluminium)	-	500	-
Cl-5.3.2, Table-1 (xi)(Wrought Aluminium Alloys- Others)	-	500	-
Cl 5.4(Lead)	-	500	-
Cl 5.4(Cadmium)	-	500	-
Cl 5.4(Arsenic)	-	500	-
Cl-7(Dimension)	-	300	-
Cl-8(EARING TEST (OPTIONAL TEST))	-	100	-
Cl-4(General requirements)	-	100	-
Cl-5.1(Material)	-	100	-
Cl-5.2(Chemical composition and mechanical properties of grades in Cl 5.1)	-	3000	-
Cl-5.3.1 a("Wrought Aluminium (with Minimum 99 Percent Al Content)- Iron+ Silicon")	-	500	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Chromium")	-	500	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Magnesium")	-	500	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Manganese")	-	500	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Nickel")	-	500	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Zinc")	-	500	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Titanium")	-	500	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Tin")	-	500	-
Cl-5.3.1 c("Wrought Aluminium (with Minimum 99 Percent Al Content)- Copper")	-	500	-
Cl-5.3.1 Note 1("Wrought Aluminium (with Minimum 99 Percent Al Content)- Aluminium")	-	500	-
Cl-5.3.1 d("Wrought Aluminium (with Minimum 99 Percent Al Content)- Others")	-	500	-
Cl-5.3.2, Table-1 (i)(Wrought Aluminium Alloys-Silicon)	-	500	-
Cl-5.3.2, Table-1 (ii)(Wrought Aluminium Alloys-Iron)	-	500	-
Cl-5.3.2, Table-1 (iii)(Wrought Aluminium Alloys-Copper)	-	500	-
Cl-5.3.2, Table-1 (iv)(Wrought Aluminium Alloys-Manganese)	-	500	-
Cl-5.3.2, Table-1 (v)(Wrought Aluminium Alloys-Magnesium)	-	500	-
Cl-5.3.2, Table-1 (vi)(Wrought Aluminium Alloys-Chromium)	-	500	-
Cl-5.3.2, Table-1 (vii)(Wrought Aluminium Alloys-Nickel)	-	500	-
Cl-5.3.2, Table-1 (viii)(Wrought Aluminium Alloys-Zinc)	-	500	-
Cl-5.3.2, Table-1 (ix)(Wrought Aluminium Alloys -Zirconium)	-	500	-
Cl-5.3.2, Table-1 (x)(Wrought Aluminium Alloys - Titanium)	-	500	-
Cl-5.3.2, Table-1 (Note 3)(Wrought Aluminium Alloys- Aluminium)	-	500	-
Cl-5.3.2, Table-1 (xi)(Wrought Aluminium Alloys- Others)	-	500	-
Cl 5.4(Lead)	-	500	-
Cl 5.4(Cadmium)	-	500	-
Cl 5.4(Arsenic)	-	500	-
Cl-7(Dimension)	-	300	-
Cl-8(EARING TEST (OPTIONAL TEST))	-	100	-

12 Jan, 2028

-
Included w.e.f 31.12.2025

3646

EMC Testing and Compliance LLP, Gurugram

8141526

IS 3315 (2024)

Direct Evaporative Air Cooler â Specification (Fourth Revision)

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Enclosure)	-	2000	-
Cl-5.2(Filter Pads)	-	2000	-
Cl-5.3(Sump Tank Capacities)	-	2000	-
Cl-5.4(Blower/Fan)	-	2000	-
Cl-5.4.3(Fan motor)	-	2000	-
Cl-5.5(Pump Set)	-	2000	-
Cl-5.6.1(Electrical wiring and connection)	-	2000	-
Cl-5.6.2(Suitable power cable)	-	2000	-
Cl-6(Rating Requirement)	-	2000	-
Cl-8.1(Performance Requirement)	-	2000	-
Cl-8.2(Sound Test)	-	5000	-
Cl-8.3(Air Delivery (Air Flow) Test)	-	5000	-
Cl-8.4(Cooling Efficiency Test)	-	5000	-
Cl-8.5(Power Consumption)	-	5000	-
Cl-8.6(EER Calculation Method)	-	5000	-
Cl-8.7(Drop Test)	-	5000	-
Cl-8.8(Air Cooler Blower/Fan Reliability Test)	-	5000	-
Cl-12.2.1(General Running Tests)	-	5000	-
Cl-12.2.2(Protection against Electric Shock)	-	5000	-
Cl-12.2.3(High Voltage Tests)	-	5000	-
Cl-12.2.4(Leakage Current)	-	5000	-
Cl-12.2.5(Provision for Earthing)	-	5000	-
Cl-12.2.6(Finish)	-	2000	-
Cl-13(Additional Requirement for ECO-Mark)	-	5000	-
Cl-14(Storage)	-	5000	-
Cl-5.7(Switches)	-	2000	-

19 Jul, 2027

-
-

3647

Samridhi Test House Pvt. Ltd.

8184706

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

Household and Similar Electrical Appliances

44500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12(Charging of metal-ion batteries)	-	1000	-
6(Classification- IS 302-1)	-	500	-
5(General conditions for the tests)	-	500	-
19.11.4.7(Harmonics)	-	0	EMI/EMC test facility not available
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	EMI/EMC test facility not available
19.11.4.5(Immunity to conducted discharges)	-	0	EMI/EMC test facility not available
19.11.4.4(Surge immunity test)	-	0	EMI/EMC test facility not available
19.11.4.3(Fast transient bursts)	-	0	EMI/EMC test facility not available
19.11.4.2(Radiated fields)	-	0	EMI/EMC test facility not available
19.11.4.1(Electrostatic discharges)	-	0	EMI/EMC test facility not available
11.8(Temperature rise)	-	5000	-
11.7(Duration corresponding)	-	2500	-
11.6(Combined appliances)	-	2500	-
11.5(Motor-operated appliances)	-	2500	-
11.4(Heating appliances)	-	2500	-
8.1.5(Live parts of built-in appliances)	-	2500	-
18(Endurance)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	2000	-
16(Leakage current and electric strength)	-	1000	-
4(General requirement)	-	500	-
32.1(Radiation Toxicity and Similar Hazards)	-	1000	-
31(Resistance to Rusting)	-	1000	-
30.2(Needle Flame Test)	-	1000	-
30.2(Glow Wire Test)	-	1000	-
30.1(Ball pressure test)	-	1000	-
29(clearance, creepage distances and solid insulation)	-	2000	-
28(Screw test and connections)	-	1000	-
27.1(Provision for Earthing, IS 302-1)	-	2000	-
26(Terminals for external conductors)	-	1000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
24(Components)	-	3000	-
23.1(Internal Wiring, IS 302-1)	-	1000	-
22.1(Construction, IS 302-1)	-	5000	-
21.1(Mechanical Strength, IS 302-1)	-	2000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
19(Abnormal Operation)	-	2000	-
18(Endurance)	-	0	-
17(Over Load Protection of Transformers and associated circuits)	-	0	-
16.3(Electric Strength (after clause 15 and 16.2))	-	1000	-
16.2(Leakage Current (after Clause 15))	-	1000	-
16.1(General)	-	1000	-
16.0(General)	-	3000	-
15.3(Humidity Test)	-	1000	-
15.2(Spillage Test)	-	1000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	4900	-
15.0(Moisture resistance)	-	5000	-
14(Transient Over Voltages)	-	1000	-
13.3(Electric Strength at operating temperature)	-	1000	-
13.2(Leakage current at operating temperature)	-	1000	-
13(Leakage current and electric strength at operating temperature)	-	1000	-
11.3(Heating)	-	1000	-
11.2(General)	-	500	-
11.1(General)	-	500	-
10.2(Current input)	-	1000	-
10.1(Power input)	-	1000	-
9(Starting of motor operation test requirements and tests)	-	1000	-
8.1.4(Protection against live parts against protective impedance)	-	1000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	1000	-
8.1.2(Protection against live parts in openings)	-	1000	-
8.1.1(Protection against live parts in all positions)	-	1000	-
7(Marking and instructions)	-	500	-
A.2(Earth continuity test)	-	1000	-
Annex C(Ageing test on motors)	-	1000	-
Annex D(Thermal motor protectors)	-	1000	-
15.2(Moisture resistance)	-	1000	-
19.17(Abnormal Operation, IS 302-1)	-	1000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
21.2(Mechanical Strength, IS 302-1)	-	1000	-
21.3(Mechanical Strength, IS 302-1)	-	1000	-
22.5(Construction)	-	0	EMI/EMC test facility not available.
22.6(Construction, IS 302-1)	-	1000	-
22.11(Construction, IS 302-1)	-	1000	-
22.16(Construction)	-	1000	-
22.32(Construction, IS 302-1)	-	0	Oxygen Bomb with Pressure Gauge not available
22.42(Construction)	-	1000	-
23.3(Internal Wiring, IS 302-1)	-	1000	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	5000	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
26.5(Terminals for external conductors)	-	1000	-
27.5(Provision for Earthing, IS 302-1)	-	1000	-
28.1(Screws and connections)	-	1000	-
22.2(Construction, IS 302-1)	-	1000	-
22.3(Construction, IS 302-1)	-	1000	-
B.22.4(Construction, IS 302-1)	-	1000	-
B.22.5(Construction, IS 302-1)	-	1000	-

-
"Domestic Electric Clothes Washing Machines (For testing charges please refer part 2 standard in LIMS)"

3648

ACE TEST HOUSE PVT. LTD.

8187926

IS 302 : Part 2 : Sec 14 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 14 electric kitchen machines (First Revision)

Electric Kitchen Machines

16050 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	100	-
6(Classification- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	50	-
7.1(Marking- IS 302-1)	-	50	-
7.1(Marking- IS 302-1)	-	50	-
7.1(Marking- IS 302-1)	-	50	-
7.1(Marking- IS 302-1)	-	50	-
7.1(Marking- IS 302-1)	-	50	-
7.1(Marking- IS 302-1)	-	50	-
7.1(Marking- IS 302-1)	-	50	-
7.3(Marking- IS 302-1)	-	50	-
7.4(Marking- IS 302-1)	-	50	-
7.6(Marking- IS 302-1)	-	50	-
7.7(Marking- IS 302-1)	-	50	-
7.8(Marking- IS 302-1)	-	50	-
7.11(Marking- IS 302-1)	-	50	-
7.12(Marking- IS 302-1)	-	50	-
7.13(Marking- IS 302-1)	-	50	-
7.14(Marking- IS 302-1)	-	50	-
7.15(Marking- IS 302-1)	-	50	-
7.101(Marking)	-	50	-
8( Protection Against Electric Shock, IS 302-1)	-	300	-
10(Power Input and Current, IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	400	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	400	-
15.1(Moisture Resistance, IS 302-1)	-	400	-
15.2(Moisture Resistance, IS 302-1)	-	400	-
15(Moisture Resistance, IS 302-1)	-	100	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	400	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	400	-
19.7(Abnormal Operation, IS 302-1)	-	100	-
19.8(Abnormal Operation, IS 302-1)	-	100	-
19.9(Abnormal Operation, IS 302-1)	-	100	-
19.1(Abnormal Operation, IS 302-1)	-	100	-
19.101(Abnormal Operation)	-	100	-
19.102(Abnormal Operation)	-	100	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	100	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	100	-
20.101(Stability & Mechanical Hazards)	-	100	-
20.102(Stability & Mechanical Hazards)	-	100	-
20.103(Stability & Mechanical Hazards)	-	100	-
20.104(Stability & Mechanical Hazards)	-	100	-
20.105(Stability & Mechanical Hazards)	-	100	-
20.106(Stability & Mechanical Hazards)	-	100	-
20.107(Stability & Mechanical Hazards)	-	100	-
20.108(Stability & Mechanical Hazards)	-	100	-
20.109(Stability & Mechanical Hazards)	-	100	-
20.110(Stability & Mechanical Hazards)	-	100	-
20.111(Stability & Mechanical Hazards)	-	100	-
20.112(Stability & Mechanical Hazards)	-	100	-
20.113(Stability & Mechanical Hazards)	-	100	-
20.114(Stability & Mechanical Hazards)	-	100	-
20.115(Stability & Mechanical Hazards)	-	100	-
20.116(Stability & Mechanical Hazards)	-	100	-
21.1(Mechanical Strength, IS 302-1)	-	250	-
21.2(Mechanical Strength, IS 302-1)	-	250	-
22(Construction, IS 302-1)	-	100	-
22.101(Construction)	-	100	-
22.102(Construction)	-	100	-
23.1(Internal Wiring, IS 302-1)	-	100	-
23.2(Internal Wiring, IS 302-1)	-	100	-
23.3(Internal Wiring, IS 302-1)	-	100	-
23.4(Internal Wiring, IS 302-1)	-	100	-
23.5(Internal Wiring, IS 302-1)	-	100	-
23.6(Internal Wiring, IS 302-1)	-	100	-
23.7(Internal Wiring, IS 302-1)	-	100	-
23.8(Internal Wiring, IS 302-1)	-	100	-
23.9(Internal Wiring, IS 302-1)	-	100	-
23.10(Internal Wiring, IS 302-1)	-	100	-
24.1(Components, IS 302-1)	-	100	-
24.2(Components, IS 302-1)	-	100	-
24.5(Components, IS 302-1)	-	100	-
24.6(Components, IS 302-1)	-	100	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
26(Terminals for External Conductors, IS 302-1)	-	500	-
27(Provision for Earthing, IS 302-1)	-	100	-
27.2(Provision for Earthing, IS 302-1)	-	100	-
27.3(Provision for Earthing, IS 302-1)	-	100	-
27.4(Provision for Earthing, IS 302-1)	-	100	-
27.5(Provision for Earthing, IS 302-1)	-	100	-
28(Screws & Connections, IS 302-1)	-	400	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	400	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	400	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	700	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	700	-
31(Resistance of Rusting, IS 302-1)	-	300	-
4(GENERAL REQUIREMENTS)	-	100	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	100	-
27(Provision for Earthing)	-	100	-
29(Clearances, Creepage distances and Solid Insulation)	-	100	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	100	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	100	-

08 Sep, 2028

-
-

3649

ACE TEST HOUSE PVT. LTD.

8187926

IS 302 : Part 2 : Sec 30 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 30 room heaters (First Revision)

room heaters

16650 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 (Classification)	-	100	-
Cl.6 (Classification)	-	100	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7(Marking and Instructions)	-	50	-
Cl.7(Marking and Instructions)	-	50	-
Cl.7(Marking and Instructions)	-	50	-
Cl.7.3(Marking and Instructions)	-	50	-
Cl.7.3(Marking and Instructions)	-	50	-
Cl.7.3(Marking and Instructions)	-	50	-
Cl.7.4(Marking and Instructions)	-	50	-
Cl.7.5(Marking and Instructions)	-	50	-
Cl.7.6 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7.8 of IS :302-1:2008(Marking and Instructions)	-	50	-
Cl.7.9 of IS :302-1:2008(Marking and Instructions)	-	50	-
Cl.7.10 of IS :302-1:2008(Marking and Instructions)	-	50	-
Cl.7.11 of IS :302-1:2008(Marking and Instructions)	-	50	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7.12.1 & IS:302-1:2009(Marking and Instructions)	-	50	-
Cl.7.13 of IS 302-1:2008(Marking and Instructions)	-	50	-
Cl.7.14 of IS302-1:2008(Marking and Instructions)	-	50	-
Cl.7.14(Marking and Instructions)	-	50	-
Cl.7.14(Marking and Instructions)	-	50	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	50	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	50	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	50	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	50	-
Cl.7.101(Marking and Instructions)	-	50	-
Cl.8 & IS:302-1:2008(Protection Against Access to Live Parts)	-	400	-
Cl.10 & IS:302-1:2008(Power Input and Current)	-	700	-
Cl.11 & IS:302-1:2008(Heating)	-	50	-
Cl.11 & IS:302-1:2008(Heating)	-	50	-
Cl.11 & IS:302-1:2008(Heating)	-	50	-
Cl.11 & IS:302-1:2008(Heating)	-	50	-
Cl.11 & IS:302-1:2008(Heating)	-	50	-
Cl.11 & IS:302-1:2008(Heating)	-	50	-
Cl.11 & IS:302-1:2008(Heating)	-	50	-
Cl.11 & IS:302-1:2008(Heating)	-	50	-
Cl.11 & IS:302-1:2008(Heating)	-	50	-
Cl.11 & IS:302-1:2008(Heating)	-	50	-
Cl.11 & IS:302-1:2008(Heating)	-	50	-
Cl.11 & IS:302-1:2008(Heating)	-	50	-
Cl.11 & IS:302-1:2008(Heating)	-	50	-
Cl.11 & IS:302-1:2008(Heating)	-	50	-
Cl.11 & IS:302-1:2008(Heating)	-	50	-
Cl.11 & IS:302-1:2008(Heating)	-	50	-
Cl.11.8(Heating)	-	50	-
Cl.11.8(Heating)	-	50	-
Cl.11.8(Heating)	-	50	-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	300	-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	300	-
Cl.15 & IS: 302-1:2008(Moisture Resistance )	-	300	-
Cl.15.3 of IS 302-1:200(Moisture Resistance )	-	300	-
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	300	-
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	300	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	50	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	50	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	50	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	50	-
Cl.19.101(Abnormal Operation.)	-	50	-
Cl.19.102(Abnormal Operation.)	-	50	-
Cl.19.103(Abnormal Operation.)	-	50	-
Cl.19.104(Abnormal Operation.)	-	50	-
Cl.19.105(Abnormal Operation.)	-	50	-
Cl.19.106(Abnormal Operation.)	-	50	-
Table 8 of IS 302-1:2008(Abnormal Operation.)	-	50	-
Cl.19.107(Abnormal Operation.)	-	50	-
Cl.19.108(Abnormal Operation.)	-	50	-
Cl.19.109(Abnormal Operation.)	-	50	-
Cl.19.110(Abnormal Operation.)	-	50	-
Cl.19.111(Abnormal Operation.)	-	50	-
Cl.19.112(Abnormal Operation.)	-	50	-
Cl.19.113(Abnormal Operation.)	-	50	-
Cl.19.114(Abnormal Operation.)	-	50	-
Cl.20 & IS:302-1:2008(Stability & Mechanical Hazards)	-	300	-
Cl.21 & IS:302-1:2008)(Mechanical Strength.)	-	50	-
Cl.21.2 of IS 302-1:2008(Mechanical Strength.)	-	50	-
Cl.21.101 (Mechanical Strength.)	-	50	-
Cl.21.102(Mechanical Strength.)	-	50	-
Cl.21.103(Mechanical Strength.)	-	50	-
Cl.22.1 of IS 302-1:2008(Construction)	-	50	-
Cl.22.5 of IS 302-1:2008(Construction)	-	50	-
Cl.22.7 of IS 302-1:2008(Construction)	-	50	-
Cl.22.8 of IS 302-1:2008(Construction)	-	50	-
Cl.22.9 of IS 302-1:2008(Construction)	-	50	-
Cl.22.11(Construction)	-	50	-
Cl.22.12 of IS 302-1:2008(Construction)	-	50	-
Cl.22.13 of IS 302-1:2008(Construction)	-	50	-
Cl.22.14 of IS 302-1:2008(Construction)	-	50	-
Cl.22.15 of IS 302-1:2008(Construction)	-	50	-
Cl.22.18 of IS 302-1:2008(Construction)	-	50	-
Cl.22.21 of IS 302-1:2008(Construction)	-	50	-
Cl.23 & IS:302-1:2008(Internal Wiring )	-	50	-
Cl.23.4 & Cl.29 of 302-1:2008(Internal Wiring )	-	50	-
Cl.23.5 of 302-1:2008(Internal Wiring )	-	50	-
Cl.23.7 of 302-1:2008(Internal Wiring )	-	50	-
C.23.7 of 302-1:2008(Internal Wiring )	-	50	-
Cl.24.1 of 302-1:2008(Component)	-	50	-
Cl.24.1 of 302-1:2008(Component)	-	50	-
Cl.24.1.3 (Component)	-	50	-
Cl.24.1.3 (Component)	-	50	-
Cl.24.1.3 (Component)	-	50	-
Cl.24.1.3 (Component)	-	50	-
C.24.1.4(Component)	-	50	-
C.24.2 of 302-1:2008(Component)	-	50	-
Cl.24.10(Component)	-	50	-
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords )	-	50	-
Cl. 25.2 of IS 3021:2008(Supply Connection and External Flexible Cords )	-	50	-
Cl. 25.3 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	50	-
Cl. 25.4 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	50	-
Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords )	-	50	-
Cl.25.6 of 302-1:2008(Supply Connection and External Flexible Cords )	-	50	-
Cl.25.7.(Supply Connection and External Flexible Cords )	-	50	-
Cl.25.8(Supply Connection and External Flexible Cords )	-	50	-
Cl. 25.9(Supply Connection and External Flexible Cords )	-	50	-
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords )	-	50	-
Cl. 25.11(Supply Connection and External Flexible Cords )	-	50	-
Cl. 25.12(Supply Connection and External Flexible Cords )	-	50	-
Cl. 25.13(Supply Connection and External Flexible Cords )	-	50	-
Cl.25.14 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	50	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	50	-
Cl.25.17 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	50	-
Cl.25.18(Supply Connection and External Flexible Cords )	-	50	-
Cl.25.20(Supply Connection and External Flexible Cords )	-	50	-
Cl.26.1 of IS 302-1:2008(Terminal for External Conductors )	-	50	-
Cl.26.10 of IS 302-1:2008(Terminal for External Conductors )	-	50	-
Cl.26.11 of IS 302-1:2008(Terminal for External Conductors )	-	50	-
Cl.27.1 of 302-1:2008(Provision for Earthing.)	-	100	-
Cl.27.5 of 302-1:2008(Provision for Earthing.)	-	100	-
Cl.28 of 302-1:2008(Screws and Connections.)	-	300	-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	300	-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	300	-
Cl.30 & IS:302-1:2008(Resistance to Heat and Fire)	-	500	-
Cl.30.2.2 of 302-1:2008(Resistance to Heat and Fire)	-	300	-
Cl.31 & IS:302-1:2008(Resistance to Rusting.)	-	300	-
Cl.31 of IS:302-1:2008(Resistance to Rusting.)	-	0	-
Cl.30.2 of 302-1:2008(Resistance to Heat and Fire : Resistance to fire)	-	0	-
Cl.30.1 of IS:302-1:2008(Resistance to Heat and Fire: Resistance to heat. )	-	0	-
Cl.29.2 of IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage Distance)	-	0	-
Cl.29.1 of IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance )	-	0	-
Cl.28 of 302-1:2008(Screws and Connections.)	-	0	-
Cl.27.5 of 302-1:2008(Provision for Earthing : ECR)	-	0	-
Cl.27.1 of 302-1:2008(Provision for Earthing )	-	0	-
Cl.26 of IS 302-1:2008(Terminal for External Conductors )	-	50	-
Cl.25.20 of 302-1:2008(Supply Connection and External Flexible Cords : Additional insulation )	-	0	-
Cl.25.18 of 302-1:2008(Supply Connection and External Flexible Cords : Arrangement of cord anchorages )	-	0	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords : Cord grip test - displacement)	-	50	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords : Cord grip test - strain at terminals )	-	50	-
Cl. 25.13 of 302-1:2008(Supply Connection and External Flexible Cords : Inlet opening of supply cords )	-	50	-
Cl. 25.12 of 302-1:2008(Supply Connection and External Flexible Cords : Moulding of cords )	-	50	-
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords : Colour of earthing wire )	-	50	-
Cl. 25.9 of 302-1:2008(Supply Connection and External Flexible Cords : Contact with sharp edge )	-	50	-
Cl.25.8 of 302-1:2008(Supply Connection and External Flexible Cords : Resistance of supply wires )	-	50	-
Cl.25.7 of IS:302-2-30:2007(Supply Connection and External Flexible Cords : Supply cords material )	-	50	-
Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords : Type of attachments )	-	50	-
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords : Means of connection )	-	50	-
Cl.24 of IS:302-2-30:2007(Component)	-	50	-
Cl.23.7 of 302-1:2008(Internal Wiring : Colour of earting conductor )	-	50	-
Cl.23 of IS:302-1:2008(Internal Wiring )	-	50	-
Cl.22.106 of IS:302-2-30:2007(Construction : Checking of thermostats, timers or similar means for visibl glowing radiant heaters)	-	50	-
Cl.22.106 of IS:302-2-30:2007(Construction : Checking of openings on the underside)	-	50	-
Cl.22.102 & Cl 22.103 of IS:302-2-30:2007(Construction : Fireguard )	-	50	-
Cl.22.101 of IS:302-2-30:2007(Construction : Prevention to contact with heating element)	-	50	-
Cl.22.24 of IS:302-2-30:2007(Construction : test of bare heating element)	-	50	-
Cl.22.18 of IS 302-1:2008(Construction : Resistance to corrosion )	-	50	-
Cl.22.15 of IS 302-1:2008(Construction : Storage hooks for flexible cords)	-	50	-
Cl.22.14 of IS 302-1:2008(Construction : ragged and sharp edges)	-	50	-
Cl.22.13 of IS 302-1:2008(Construction : Position of handles )	-	50	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knobs,grips,lever and similer parts )	-	50	-
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable parts )	-	50	-
Cl.22.7 of IS:302-2-30:2007(Construction : Pressure test of oil heater )	-	50	-
Cl.21.101 of IS:302-2-30:2007(Mechanical Strength : fire gaurd deformation test )	-	50	-
Cl.21.2 of IS 302-1:2008(Mechanical Strength : Pentration by sharp implementation )	-	50	-
Cl.21.1 of IS:302-1:2008)(Mechanical Strength : Rough handling )	-	50	-
Cl.20 of IS:302-2-30:2007(Stability of Mechanical Hazards)	-	50	-
Cl.19.114 of IS:302-2-30:2007(Abnormal Operation : the temp. of the surface of the container for oil heaters )	-	50	-
Cl.19.112 of IS:302-2-30:2007(Abnormal Operation : Ignition of bleached cotton gauge)	-	50	-
Cl.19.111 of IS:302-2-30:2007(Abnormal Operation : Ignition of flannelette for Visibly glowing heaters)	-	50	-
Cl.19.110 of IS:302-2-30:2007(Abnormal Operation : operation against wall for visibly glowing radiant heaters )	-	50	-
Cl.19.109 of IS:302-2-30:2007(Abnormal Operation : operation against wall for fan heater )	-	50	-
Cl.19.106 of IS:302-2-30:2007(Abnormal Operation : Locked rotor of fan hetear )	-	50	-
Cl.19.103 , Cl 19.104 of IS:302-2-30:2007(Abnormal Operation : Operation after Covering by cotton)	-	50	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : High Voltage )	-	50	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : temp rise of supply cord )	-	50	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : Temp rise of test corner )	-	50	-
Cl.19 of IS:302-1:2008(Abnormal Operation : Emission of molten or poisonous or ignitable gas)	-	50	-
Cl.16 of IS:302-1:2008(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	0	-
Cl.16 of IS:302-1:2008(Leakage current and Electric strength (After humidity): Leakage current )	-	0	-
Cl.15 of IS 302-1:2008(Moisture Resistance )	-	0	-
Cl.13 of IS:302-1:2008(Leakage Current of Electric Strength at operating temp. )	-	0	-
Cl.13 of IS:302-1:2008(Leakage Current of Electric Strength at operating temp. )	-	0	-
Cl.11 of IS:302-2:30: 2007(Heating : Room temperature)	-	50	-
Cl.11.8 of IS:302-2:30: 2007(Heating : For liquid filled radiators the temp. rise of the outer surface of the liquid container)	-	50	-
Cl.11 of IS:302-2:30: 2007(Heating : Temperature rise in winding)	-	50	-
Cl.11 of IS:302-2:30: 2007(Heating : Air-outlet grills)	-	50	-
Cl.11 of IS:302-2:30: 2007(Heating : Surfaces of handles, knobs, grips and similar parts)	-	50	-
Cl.11 of IS:302-2:30: 2007(Heating : Wooden supports, walls, ceiling and floor of the test corner)	-	50	-
Cl.11 of IS:302-2:30: 2007(Heating : PVC Insulation )	-	50	-
Cl.10 of IS:302-1:2008(Power Input and Current)	-	0	-
Cl.8 of IS:302-1:2008(Protection Against Access to Live Parts)	-	0	-
Cl.7.101 of IS:302-2:30: 2007(Marking and Instructions : standard mark. )	-	50	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions : Visibility of marking concerning covering)	-	50	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions : discernibility from the out side )	-	50	-
Cl.7.14 of IS:302-2:30: 2007(Marking and Instructions : Height of “Do not cover”)	-	50	-
Cl.7.14 of IS:302-2:30: 2007(Marking and Instructions : height of symbol)	-	50	-
Cl.7.14 of IS302-1:2008(Marking and Instructions : Legibility and durability )	-	50	-
Cl.7.13 of IS 302-1:2008(Marking and Instructions : Languge of instruction and texts )	-	50	-
Cl.7.11 of IS :302-1:2008(Marking and Instructions : Controls )	-	50	-
Cl.7.9 of IS :302-1:2008(Marking and Instructions : switches )	-	50	-
Cl.7.8 of IS :302-1:2008(Marking and Instructions : terminals )	-	50	-
Cl.7.6 of IS:302-1:2008(Marking and Instructions : Symbols )	-	50	-
Cl.7.5 of IS:302-1:2008(Marking and Instructions : upper of lower limit of the rated power input )	-	50	-
Cl 7.1 & Cl.7.6 of IS:302-2:30: 2007(Marking and Instructions : Do not cover )	-	50	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Country of manufacture )	-	50	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Symbol for Class-II )	-	50	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Model or type )	-	50	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Name , trade-mark or identification mark of the manufacturer )	-	50	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : rated power input )	-	50	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Nature of supply )	-	50	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Rated Voltage )	-	50	-
Cl.22.6 of IS 302-1:2008(Construction)	-	50	-
Cl.22.20 of IS 302-1:2008(Construction)	-	50	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	50	-
Cl.17 & IS:302-1:2008(Over load Protection of Transformers and Associated Circuits )	-	200	-

08 Sep, 2028

-
-

3650

ACE TEST HOUSE PVT. LTD.

8187926

IS 302 : Part 2 : Sec 201 (2008)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 201 electric immersion water heaters (First Revision)

electric immersion water heaters

16050 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 of IS 302-‐2-‐201:2008(Classification)	-	300	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.8 of IS 302‐2-201: 2008(Protection Against Access to Live Parts)	-	300	-
Cl.10 of IS 302‐2‐201:2008(Power Input and Current )	-	400	-
Cl.11 of IS 302-2201: 2008(Heating)	-	150	-
Cl.11 of IS 302-2201: 2008(Heating)	-	150	-
Cl.11 of IS 302-2201: 2008(Heating)	-	150	-
Cl.11 of IS 302-2201: 2008(Heating)	-	150	-
Cl.11 of IS 302-2201: 2008(Heating)	-	150	-
Cl.11 of IS 302-2201: 2008(Heating)	-	150	-
Cl.11 of IS 302-2201: 2008(Heating)	-	150	-
Cl.11 of IS 302-2201: 2008(Heating)	-	150	-
Cl.11 of IS 302-2201: 2008(Heating)	-	150	-
Cl.11 of IS 302-2201: 2008(Heating)	-	150	-
Cl.11 of IS 302-2201: 2008(Heating)	-	150	-
Cl.13 of IS 302-2-201: 2008(Leakage Current & Electric Strength at Operating Temperature)	-	600	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	150	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	150	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	300	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	300	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	150	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	150	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	150	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	150	-
Cl.20 of IS 302-2-201: 2008(Stability & Mechanical Hazards)	-	100	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	100	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	100	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	100	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	100	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	100	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	100	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	100	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	100	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	100	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	100	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	100	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	100	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	100	-
Cl.24 of IS 302-2-201: 2008(Component)	-	100	-
Cl.24 of IS 302-2-201: 2008(Component)	-	100	-
Cl.24 of IS 302-2-201: 2008(Component)	-	100	-
Cl.24 of IS 302-2-201: 2008(Component)	-	100	-
Cl.24 of IS 302-2-201: 2008(Component)	-	100	-
Cl.24 of IS 302-2-201: 2008(Component)	-	100	-
Cl.24 of IS 302-2-201: 2008(Component)	-	100	-
Cl.24 of IS 302-2-201: 2008(Component)	-	100	-
Cl.24 of IS 302-2-201: 2008(Component)	-	100	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	150	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	150	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	150	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	150	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	150	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	150	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	150	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	150	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	150	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	150	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	150	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	150	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	150	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	150	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	150	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	150	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	150	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	150	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	150	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	150	-
Cl.26 of IS 302-2-201: 2008(Terminals for External Conductors)	-	100	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	200	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	200	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	200	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	200	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	200	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	200	-
Cl.28 of IS 302-2-201: 2008(Screws & Connections )	-	200	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	500	-
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	1000	-
Cl.31 of IS 302-2-201:2008(Resistance of Rusting )	-	300	-
Cl.32 of IS 302-2-201:2008(Radiation, Toxicity and Similar Hazards)	-	300	-
4(GENERAL REQUIREMENTS)	-	100	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	100	-
Cl.17 of IS 302‐2-201: 2008(Overload Protection of Transformers & Associated Circuits)	-	200	-

08 Sep, 2028

-
-

3651

ACE TEST HOUSE PVT. LTD.

8187926

IS 302 : Part 2 : Sec 202 (1992)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 202 electric stoves

electric stoves

17900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	150	-
6(Classification- IS 302-1)	-	150	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.3(Marking- IS 302-1)	-	100	-
7.4(Marking- IS 302-1)	-	100	-
7.6(Marking- IS 302-1)	-	100	-
7.11(Marking- IS 302-1)	-	100	-
7.12(Marking- IS 302-1)	-	100	-
7.14(Marking- IS 302-1)	-	100	-
7.15(Marking- IS 302-1)	-	100	-
7.101(Marking)	-	100	-
8( Protection Against Electric Shock, IS 302-1)	-	400	-
10(Power Input and Current, IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	150	-
11(Heating, IS 302-1)	-	150	-
11(Heating, IS 302-1)	-	150	-
11(Heating, IS 302-1)	-	150	-
11(Heating, IS 302-1)	-	150	-
11(Heating, IS 302-1)	-	150	-
11(Heating, IS 302-1)	-	150	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	700	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	700	-
15.1(Moisture Resistance, IS 302-1)	-	300	-
15.3(Moisture Resistance, IS 302-1)	-	300	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	700	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	700	-
19.2(Abnormal Operation, IS 302-1)	-	350	-
19.2(Abnormal Operation, IS 302-1)	-	350	-
19.3(Abnormal Operation, IS 302-1)	-	350	-
19.3(Abnormal Operation, IS 302-1)	-	350	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	350	-
21.1(Mechanical Strength, IS 302-1 & IS 302-2-202)	-	350	-
22(Construction, IS 302-1)	-	150	-
22.101(Construction)	-	150	-
22.102(Construction)	-	150	-
22.103(Construction)	-	150	-
22.104(Construction)	-	150	-
22.105(Construction)	-	150	-
22.105.1(Construction)	-	150	-
22.105.2(Construction)	-	150	-
22.106(Construction)	-	150	-
22.107(Construction)	-	150	-
11.107.1(Construction)	-	150	-
23.1(Internal Wiring, IS 302-1)	-	150	-
23.2(Internal Wiring, IS 302-1)	-	150	-
23.8(Internal Wiring, IS 302-1)	-	150	-
23.9(Internal Wiring, IS 302-1)	-	150	-
23.10(Internal Wiring, IS 302-1)	-	150	-
24.1(Components, IS 302-1)	-	150	-
24.2(Components, IS 302-1)	-	150	-
24.101(Components)	-	150	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.4(Supply Connection and External Flexible Cords)	-	100	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
26(Terminals for External Conductors, IS 302-1)	-	400	-
27.1(Provision for Earthing, IS 302-1)	-	100	-
27.2(Provision for Earthing, IS 302-1)	-	100	-
27.3(Provision for Earthing, IS 302-1)	-	100	-
27.4(Provision for Earthing, IS 302-1)	-	100	-
27.5(Provision for Earthing, IS 302-1)	-	100	-
28(Screws & Connections, IS 302-1)	-	400	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	150	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	150	-
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	800	-
30.2(Resistance to Heat, Fire & Tracking, IS 302-1)	-	800	-
31(Resistance of Rusting, IS 302-1)	-	300	-
7.13(Marking- IS 302-1)	-	100	-
12(Operation under overload conditions of appliances with heating elements, IS 302-2-202: 1992)	-	300	-
6(Classification- IS 302-1 )	-	150	-
6(Classification- IS 302-1)	-	150	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.3(Marking- IS 302-1)	-	100	-
7.4(Marking- IS 302-1)	-	100	-
7.6(Marking- IS 302-1)	-	100	-
7.11(Marking- IS 302-1)	-	100	-
7.12(Marking- IS 302-1)	-	100	-
7.14(Marking- IS 302-1)	-	100	-
7.15(Marking- IS 302-1)	-	100	-
7.101(Marking)	-	100	-
8( Protection Against Electric Shock, IS 302-1)	-	400	-
10(Power Input and Current, IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	150	-
11(Heating, IS 302-1)	-	150	-
11(Heating, IS 302-1)	-	150	-
11(Heating, IS 302-1)	-	150	-
11(Heating, IS 302-1)	-	150	-
11(Heating, IS 302-1)	-	150	-
11(Heating, IS 302-1)	-	150	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	700	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	700	-
15.1(Moisture Resistance, IS 302-1)	-	300	-
15.3(Moisture Resistance, IS 302-1)	-	300	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	700	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	700	-
19.2(Abnormal Operation, IS 302-1)	-	350	-
19.2(Abnormal Operation, IS 302-1)	-	350	-
19.3(Abnormal Operation, IS 302-1)	-	350	-
19.3(Abnormal Operation, IS 302-1)	-	350	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	350	-
21.1(Mechanical Strength, IS 302-1 & IS 302-2-202)	-	350	-
22(Construction, IS 302-1)	-	150	-
22.101(Construction)	-	150	-
22.102(Construction)	-	150	-
22.103(Construction)	-	150	-
22.104(Construction)	-	150	-
22.105(Construction)	-	150	-
22.105.1(Construction)	-	150	-
22.105.2(Construction)	-	150	-
22.106(Construction)	-	150	-
22.107(Construction)	-	150	-
11.107.1(Construction)	-	150	-
23.1(Internal Wiring, IS 302-1)	-	150	-
23.2(Internal Wiring, IS 302-1)	-	150	-
23.8(Internal Wiring, IS 302-1)	-	150	-
23.9(Internal Wiring, IS 302-1)	-	150	-
23.10(Internal Wiring, IS 302-1)	-	150	-
24.1(Components, IS 302-1)	-	150	-
24.2(Components, IS 302-1)	-	150	-
24.101(Components)	-	150	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.4(Supply Connection and External Flexible Cords)	-	100	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
26(Terminals for External Conductors, IS 302-1)	-	400	-
27.1(Provision for Earthing, IS 302-1)	-	100	-
27.2(Provision for Earthing, IS 302-1)	-	100	-
27.3(Provision for Earthing, IS 302-1)	-	100	-
27.4(Provision for Earthing, IS 302-1)	-	100	-
27.5(Provision for Earthing, IS 302-1)	-	100	-
28(Screws & Connections, IS 302-1)	-	400	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	150	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	150	-
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	800	-
30.2(Resistance to Heat, Fire & Tracking, IS 302-1)	-	800	-
31(Resistance of Rusting, IS 302-1)	-	300	-
7.13(Marking- IS 302-1)	-	100	-
12(Operation under overload conditions of appliances with heating elements, IS 302-2-202: 1992)	-	300	-

08 Sep, 2028

-
-

3652

ACE TEST HOUSE PVT. LTD.

8187926

IS 302 : Part 2 : Sec 15 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 15 appliances for heating liquids (First Revision)

appliances for heating liquids

17400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	200	-
7(Marking and instructions)	-	500	Testing Charges of complete Cl. No. 7, IS 302 : Part 2 : Sec 15
8(Protection against live parts)	-	700	-
10(POWER INPUT AND CURRENT)	-	1000	Testing Charges of complete Cl. No. 10, IS 302 : Part 2 : Sec 15
11(HEATING)	-	700	Testing Charges of complete Cl. No. 11, IS 302 : Part 2 : Sec 15
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	1000	Testing Charges of complete Cl. No. 13, IS 302 : Part 2 : Sec 15
15(MOISTURE RESISTANCE)	-	1000	Testing Charges of complete Cl. No. 15, IS 302 : Part 2 : Sec 15
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1000	Testing Charges of complete Cl. No. 16, IS 302 : Part 2 : Sec 15
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	500	Testing Charges of complete Cl. No. 17, IS 302 : Part 2 : Sec 15
18(ENDURANCE)	-	1000	Testing Charges of complete Cl. No. 18, IS 302 : Part 2 : Sec 15
19(ABNORMAL OPERATION)	-	1000	Testing Charges of complete Cl. No. 19, IS 302 : Part 2 : Sec 15
20(STABILITY AND MECHANICAL HAZARDS)	-	1000	Testing Charges of complete Cl. No. 20, IS 302 : Part 2 : Sec 15
21(MECHANICAL STRENGTH)	-	1000	Testing Charges of complete Cl. No. 21, IS 302 : Part 2 : Sec 15
22(CONSTRUCTION)	-	500	Testing Charges of complete Cl. No. 22, IS 302 : Part 2 : Sec 15
23(INTERNAL WIRING)	-	500	Testing Charges of complete Cl. No. 23, IS 302 : Part 2 : Sec 15
24(COMPONENTS)	-	500	Testing Charges of complete Cl. No. 24, IS 302 : Part 2 : Sec 15
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	1000	Testing Charges of complete Cl. No. 25, IS 302 : Part 2 : Sec 15
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	100	Testing Charges of complete Cl. No. 26, IS 302 : Part 2 : Sec 15
27(PROVISION FOR EARTHING)	-	500	Testing Charges of complete Cl. No.27 , IS 302 : Part 2 : Sec 15
28(SCREWS AND CONNECTIONS)	-	500	Testing Charges of complete Cl. No.28 , IS 302 : Part 2 : Sec 15
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	500	Testing Charges of complete Cl. No. 29, IS 302 : Part 2 : Sec 15
30(RESISTANCE TO HEAT AND FIRE)	-	1000	Testing Charges of complete Cl. No. 30, IS 302 : Part 2 : Sec 15
31(RESISTANCE TO RUSTING)	-	500	-
4(General requirements)	-	50	-
5(General Conditions of tests)	-	50	-
6(Classification- IS 302-1)	-	0	-
6(Classification- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-2-15)	-	0	-
7.3(Marking- IS 302-1)	-	0	-
7.4(Marking- IS 302-1)	-	0	-
7.5(Marking- IS 302-1)	-	0	-
7.6(Marking- IS 302-1)	-	0	-
7.7(Marking- IS 302-1)	-	0	-
7.8(Marking- IS 302-1)	-	0	-
6(Classification- IS 302-1)	-	0	-
6(Classification- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	10	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
Marking- IS 302-1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-2-15)	-	0	-
7.3(Marking- IS 302-1)	-	0	-
7.4(Marking- IS 302-1)	-	0	-
7.5(Marking- IS 302-1)	-	0	-
7.6(Marking- IS 302-1)	-	0	-
7.7(Marking- IS 302-1)	-	0	-
7.8(Marking- IS 302-1)	-	0	-
7.9(Marking- IS 302-1)	-	0	-
7.1O(Marking- IS 302-1)	-	0	-
7.11(Marking- IS 302-1)	-	0	-
7.12(Marking- IS 302-2-15)	-	0	-
7.12(Marking- IS 302-1)	-	0	-
7.12.1(Marking- IS 302-1)	-	0	-
7.12.3(Marking- IS 302-1)	-	0	-
7.12.5(Marking- IS 302-1)	-	0	-
7.12.6(Marking- IS 302-1)	-	0	-
7.13(Marking- IS 302-1)	-	0	-
7.14(Marking- IS 302-1)	-	0	-
7.15(Marking- IS 302-1)	-	0	-
7.101(Marking- IS 302-2-15)	-	0	-
8(Protection Against Electric Shock, IS 302-1)	-	0	-
10(Power Input and Current, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	0	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	0	-
15.1(Moisture Resistance, IS 302-1)	-	0	-
15.2(Spillage test as 15.2, IS 3.02-1 & 302-2-15)	-	0	-
16(Leakage current as per Cl 16, IS 302-1)	-	0	-
16(electric strength as per Cl 16, IS 302-1)	-	0	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	0	-
19.13(Abnormal Operation as per Cl 19, IS 302-2-15)	-	0	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	0	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	0	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	0	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	0	-
21.1(Mechanical Strength, IS 302-1)	-	0	-
21.2(Mechanical Strength, IS 302-1)	-	0	-
22.1(Construction, IS 302-1)	-	0	-
22.7(Construction as per Cl 22.7, IS 3.02-2-15)	-	0	-
22.107(Construction as per Cl 22.7, IS 3.02-2-15)	-	0	-
22.108(Construction as per Cl 22.8, IS 3.02-2-15)	-	0	-
23.1(Internal Wiring, IS 302-1)	-	0	-
23.2(Internal Wiring, IS 302-1)	-	0	-
23.4(Internal Wiring, IS 302-1)	-	0	-
23.5(Internal Wiring, IS 302-1)	-	0	-
23.6(Internal Wiring, IS 302-1)	-	0	-
23.7(Internal Wiring, IS 302-1)	-	0	-
23.8(Internal Wiring, IS 302-1)	-	0	-
23.9(Internal Wiring, IS 302-1)	-	0	-
23.1O(Internal Wiring, IS 302-1)	-	0	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.9(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
26(Terminals for External Conductors, IS 302-1)	-	0	-
27.1(Provision for Earthing, IS 302-1)	-	0	-
27.2(Provision for Earthing, IS 302-1)	-	0	-
27.3(Provision for Earthing, IS 302-1)	-	0	-
27.4(Provision for Earthing, IS 302-1)	-	0	-
27.5(Provision for Earthing, IS 302-1)	-	0	-
28(Screws & Connections, IS 302-1)	-	0	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	0	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	0	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	0	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	0	-
31(Resistance of Rusting, IS 302-1)	-	0	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	0	-
22.16(Automatic cord reel)	-	0	Test facility not available
22.32(Oxygen bomb for rubber material)	-	0	Test facility not available
22.47(Water pressure inlet)	-	0	Test facility not available
22.106(Interlocks)	-	100	-
22.3(Flexing test)	-	100	-
24(Components)	-	0	-
6.0(Classification)	-	100	-
7(Marking and instructions)	-	100	-
8(Protection against live parts)	-	300	-
10(POWER INPUT AND CURRENT)	-	500	-
11(HEATING)	-	700	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	800	-
15(MOISTURE RESISTANCE)	-	800	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	800	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	250	-
18(ENDURANCE)	-	1000	-
19(ABNORMAL OPERATION)	-	1000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	250	-
21(MECHANICAL STRENGTH)	-	500	-
22(CONSTRUCTION)	-	500	-
23(INTERNAL WIRING)	-	500	-
24(COMPONENTS)	-	250	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	250	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	250	-
27(PROVISION FOR EARTHING)	-	250	-
28(SCREWS AND CONNECTIONS)	-	250	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	500	-
30(RESISTANCE TO HEAT AND FIRE)	-	1000	-
31(RESISTANCE TO RUSTING)	-	500	-
4(General requirements)	-	50	-
5(General Conditions of tests)	-	50	-
6(Classification- IS 302-1)	-	50	-
6(Classification- IS 302-1)	-	50	-
7.1(Marking- IS 302-1)	-	10	-
7.1(Marking- IS 302-1)	-	10	-
7.1(Marking- IS 302-1)	-	10	-
7.1(Marking- IS 302-1)	-	10	-
7.1(Marking- IS 302-1)	-	10	-
7.1(Marking- IS 302-1)	-	10	-
7.1(Marking- IS 302-1)	-	10	-
7.1(Marking- IS 302-1)	-	10	-
7.1(Marking- IS 302-2-15)	-	10	-
7.3(Marking- IS 302-1)	-	10	-
7.4(Marking- IS 302-1)	-	10	-
7.5(Marking- IS 302-1)	-	10	-
7.6(Marking- IS 302-1)	-	10	-
7.7(Marking- IS 302-1)	-	10	-
7.8(Marking- IS 302-1)	-	10	-
6(Classification- IS 302-1)	-	50	-
6(Classification- IS 302-1)	-	50	-
7.1(Marking- IS 302-1)	-	10	-
7.1(Marking- IS 302-1)	-	10	-
7.1(Marking- IS 302-1)	-	10	-
7.1(Marking- IS 302-1)	-	10	-
7.1(Marking- IS 302-1)	-	10	-
7.1(Marking- IS 302-1)	-	10	-
7.1(Marking- IS 302-1)	-	10	-
Marking- IS 302-1(Marking- IS 302-1)	-	10	-
7.1(Marking- IS 302-2-15)	-	10	-
7.3(Marking- IS 302-1)	-	10	-
7.4(Marking- IS 302-1)	-	10	-
7.5(Marking- IS 302-1)	-	10	-
7.6(Marking- IS 302-1)	-	10	-
7.7(Marking- IS 302-1)	-	10	-
7.8(Marking- IS 302-1)	-	10	-
7.9(Marking- IS 302-1)	-	10	-
7.1O(Marking- IS 302-1)	-	10	-
7.11(Marking- IS 302-1)	-	10	-
7.12(Marking- IS 302-2-15)	-	10	-
7.12(Marking- IS 302-1)	-	10	-
7.12.1(Marking- IS 302-1)	-	10	-
7.12.3(Marking- IS 302-1)	-	10	-
7.12.5(Marking- IS 302-1)	-	10	-
7.12.6(Marking- IS 302-1)	-	10	-
7.13(Marking- IS 302-1)	-	10	-
7.14(Marking- IS 302-1)	-	10	-
7.15(Marking- IS 302-1)	-	10	-
7.101(Marking- IS 302-2-15)	-	10	-
8(Protection Against Electric Shock, IS 302-1)	-	300	-
10(Power Input and Current, IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	500	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	500	-
15.1(Moisture Resistance, IS 302-1)	-	500	-
15.2(Spillage test as 15.2, IS 3.02-1 & 302-2-15)	-	500	-
16(Leakage current as per Cl 16, IS 302-1)	-	500	-
16(electric strength as per Cl 16, IS 302-1)	-	500	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	200	-
19.13(Abnormal Operation as per Cl 19, IS 302-2-15)	-	100	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	100	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	100	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	100	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	250	-
21.1(Mechanical Strength, IS 302-1)	-	100	-
21.2(Mechanical Strength, IS 302-1)	-	100	-
22.1(Construction, IS 302-1)	-	100	-
22.7(Construction as per Cl 22.7, IS 3.02-2-15)	-	100	-
22.107(Construction as per Cl 22.7, IS 3.02-2-15)	-	100	-
22.108(Construction as per Cl 22.8, IS 3.02-2-15)	-	100	-
23.1(Internal Wiring, IS 302-1)	-	100	-
23.2(Internal Wiring, IS 302-1)	-	100	-
23.4(Internal Wiring, IS 302-1)	-	100	-
23.5(Internal Wiring, IS 302-1)	-	250	-
23.6(Internal Wiring, IS 302-1)	-	100	-
23.7(Internal Wiring, IS 302-1)	-	100	-
23.8(Internal Wiring, IS 302-1)	-	100	-
23.9(Internal Wiring, IS 302-1)	-	100	-
23.1O(Internal Wiring, IS 302-1)	-	100	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.9(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
26(Terminals for External Conductors, IS 302-1)	-	250	-
27.1(Provision for Earthing, IS 302-1)	-	100	-
27.2(Provision for Earthing, IS 302-1)	-	100	-
27.3(Provision for Earthing, IS 302-1)	-	100	-
27.4(Provision for Earthing, IS 302-1)	-	100	-
27.5(Provision for Earthing, IS 302-1)	-	250	-
28(Screws & Connections, IS 302-1)	-	250	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	0	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	0	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	0	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	0	-
31(Resistance of Rusting, IS 302-1)	-	250	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	100	-
22.16(Automatic cord reel)	-	100	-
22.32(Oxygen bomb for rubber material)	-	100	-
22.47(Water pressure inlet)	-	100	-
22.106(Interlocks)	-	100	-
22.3(Flexing test)	-	100	-
24(Components)	-	50	-

08 Sep, 2028

-
-

3653

Rajkot Metlab Services LLP, Rajkot

7183706

IS 21 (1992)

Wrought aluminium and aluminium alloys for manufacture of utensils specification (Fourth Revision)

2800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(0.2 Percent Proof Stress)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(0.2 Percent Proof Stress)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'O')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'O')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H4')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H4')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H3')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H3')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H3')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H3')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H3')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H3')(0.2 Percent Proof Stress)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H2')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H2')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H2')(0.2 Percent Proof Stress)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H1')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H1')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H1')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H1')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H1')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H1')(0.2 Percent Proof Stress)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H3')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H3')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H3')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H3')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H3')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H3')(0.2 Percent Proof Stress)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H2')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H2')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H2')(0.2 Percent Proof Stress)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H1')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H1')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H1')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H1')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H1')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H1')(0.2 Percent Proof Stress)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'O')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'O')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H4')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H4')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H3')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H3')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H3')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H3')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H3')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H2')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H2')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H1')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H1')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H1')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H1')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H1')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'O')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'O')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'O')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'O')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'O')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'O')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H4')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H4')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H2')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H2')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'O')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'O')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'O')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'O')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'O')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'O')(Tensile Strength)	-	1000	-
4.2, Table 1of IS:21 (Designation 64430)(Aluminium)	-	500	-
4.2, Table 1of IS:21 (Designation 64430)(Lead)	-	500	-
4.2, Table 1of IS:21 (Designation 64430)(Chromium)	-	500	-
4.2, Table 1of IS:21 (Designation 64430)(Titanium and or other grain refining elements)	-	500	-
4.2, Table 1of IS:21 (Designation 64430)(Zinc)	-	500	-
4.2, Table 1of IS:21 (Designation 64430)(Manganese)	-	500	-
4.2, Table 1of IS:21 (Designation 64430)(Iron)	-	500	-
4.2, Table 1of IS:21 (Designation 64430)(Silicon)	-	500	-
4.2, Table 1of IS:21 (Designation 64430)(Magnesium)	-	500	-
4.2, Table 1of IS:21 (Designation 64430)(Copper)	-	500	-
4.2, Table 1of IS:21 (Designation 51000-B)(Aluminium)	-	500	-
4.2, Table 1of IS:21 (Designation 51000-B)(Lead)	-	500	-
4.2, Table 1of IS:21 (Designation 51000-B)(Chromium)	-	500	-
4.2, Table 1of IS:21 (Designation 51000-B)(Zinc)	-	500	-
4.2, Table 1of IS:21 (Designation 51000-B)(Manganese)	-	500	-
4.2, Table 1of IS:21 (Designation 51000-B)(Iron)	-	500	-
4.2, Table 1of IS:21 (Designation 51000-B)(Silicon)	-	500	-
4.2, Table 1of IS:21 (Designation 51000-B)(Magnesium)	-	500	-
4.2, Table 1of IS:21 (Designation 51000-B)(Copper)	-	500	-
4.2, Table 1of IS:21 (Designation 51000-A)(Aluminium)	-	500	-
4.2, Table 1of IS:21 (Designation 51000-A)(Lead)	-	500	-
4.2, Table 1of IS:21 (Designation 51000-A)(Chromium)	-	500	-
4.2, Table 1of IS:21 (Designation 51000-A)(Zinc)	-	500	-
4.2, Table 1of IS:21 (Designation 51000-A)(Manganese)	-	500	-
4.2, Table 1of IS:21 (Designation 51000-A)(Iron)	-	500	-
4.2, Table 1of IS:21 (Designation 51000-A)(Silicon)	-	500	-
4.2, Table 1of IS:21 (Designation 51000-A)(Magnesium)	-	500	-
4.2, Table 1of IS:21 (Designation 51000-A)(Copper)	-	500	-
4.2, Table 1of IS:21 (Designation 40800)(Aluminium)	-	500	-
4.2, Table 1of IS:21 (Designation 40800)(Lead)	-	500	-
4.2, Table 1of IS:21 (Designation 40800)(Titanium and or other grain refining elements)	-	500	-
4.2, Table 1of IS:21 (Designation 40800)(Zinc)	-	500	-
4.2, Table 1of IS:21 (Designation 40800)(Manganese)	-	500	-
4.2, Table 1of IS:21 (Designation 40800)(Iron)	-	500	-
4.2, Table 1of IS:21 (Designation 40800)(Silicon)	-	500	-
4.2, Table 1of IS:21 (Designation 40800)(Magnesium)	-	500	-
4.2, Table 1of IS:21 (Designation 40800)(Copper)	-	500	-
4.2, Table 1of IS:21 (Designation 31500)(Aluminium)	-	500	-
4.2, Table 1of IS:21 (Designation 31500)(Titanium and or other grain refining elements)	-	500	-
4.2, Table 1of IS:21 (Designation 31500)(Lead)	-	500	-
4.2, Table 1of IS:21 (Designation 31500)(Manganese)	-	500	-
4.2, Table 1of IS:21 (Designation 31500)(Iron)	-	500	-
4.2, Table 1of IS:21 (Designation 31500)(Silicon)	-	500	-
4.2, Table 1of IS:21 (Designation 31500)(Magnesium)	-	500	-
4.2, Table 1of IS:21 (Designation 31500)(Copper)	-	500	-
4.2, Table 1of IS:21 (Designation 31000)(Aluminium)	-	500	-
4.2, Table 1of IS:21 (Designation 31000)(Lead)	-	500	-
4.2, Table 1of IS:21 (Designation 31000)(Chromium)	-	500	-
4.2, Table 1of IS:21 (Designation 31000)(Titanium and or other grain refining elements)	-	500	-
4.2, Table 1of IS:21 (Designation 31000)(Zinc)	-	500	-
4.2, Table 1of IS:21 (Designation 31000)(Manganese)	-	500	-
4.2, Table 1of IS:21 (Designation 31000)(Iron)	-	500	-
4.2, Table 1of IS:21 (Designation 31000)(Silicon)	-	500	-
4.2, Table 1of IS:21 (Designation 31000)(Magnesium)	-	500	-
4.2, Table 1of IS:21 (Designation 31000)(Copper)	-	500	-
4.2, Table 1of IS:21 (Designation 19600)(Aluminium)	-	500	-
4.2, Table 1of IS:21 (Designation 19600)(Cu+Si+Fe+Mn+Zn)	-	500	-
4.2, Table 1of IS:21 (Designation 19600)(Lead)	-	500	-
4.2, Table 1of IS:21 (Designation 19600)(Zinc)	-	500	-
4.2, Table 1of IS:21 (Designation 19600)(Manganese)	-	500	-
4.2, Table 1of IS:21 (Designation 19600)(Iron)	-	500	-
4.2, Table 1of IS:21 (Designation 19600)(Silicon)	-	500	-
4.2, Table 1of IS:21 (Designation 19600)(Copper)	-	500	-
4.2, Table 1of IS:21 (Designation 19500)(Aluminium)	-	500	-
4.2, Table 1of IS:21 (Designation 19500)(Cu+Si+Fe+Mn+Zn)	-	500	-
4.2, Table 1of IS:21 (Designation 19500)(Lead)	-	500	-
4.2, Table 1of IS:21 (Designation 19500)(Zinc)	-	500	-
4.2, Table 1of IS:21 (Designation 19500)(Manganese)	-	500	-
4.2, Table 1of IS:21 (Designation 19500)(Iron)	-	500	-
4.2, Table 1of IS:21 (Designation 19500)(Silicon)	-	500	-
4.2, Table 1of IS:21 (Designation 19500)(Copper)	-	500	-
4.2, Table 1of IS:21 (Designation 19000)(Lead)	-	500	-
4.2, Table 1of IS:21 (Designation 19000)(Cu+Mg+Si+Fe+Mn+Zn)	-	500	-
4.2, Table 1of IS:21 (Designation 19000)(Aluminium)	-	500	-
4.2, Table 1of IS:21 (Designation 19000)(Zinc)	-	500	-
4.2, Table 1of IS:21 (Designation 19000)(Manganese)	-	500	-
4.2, Table 1of IS:21 (Designation 19000)(Iron)	-	500	-
4.2, Table 1of IS:21 (Designation 19000)(Silicon)	-	500	-
4.2, Table 1of IS:21 (Designation 19000)(Magnesium)	-	500	-
4.2, Table 1of IS:21 (Designation 19000)(Copper)	-	500	-
4.1, & 4.1.1(Lead)	-	500	-
4.1.2(Aluminium)	-	500	-
5(Marking)	-	100	-
Cl.4.2 Table 1(Silicon - IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.4.2 Table 1(Iron - IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.4.2 Table 1(Copper - IS 228 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.4.2 Table 1(Manganese - IS 228 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.4.2 Table 1(Magnesium - IS 228 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.4.2 Table 1(Chromium - IS 228 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.4.2 Table 1(Zinc - IS 228 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.4.2 Table 1(Titanium - IS 228 and its parts or any other intrumental/chemical methods)	-	500	-
4.2, Table 1of IS:21 (Designation 31500)(Zinc)	-	500	-

12 Jan, 2028

-
Included w.e.f 31.12.2025

3654

Standard Testing Laboratory Private Limited

8170106

IS 18256 (2023)

Solid Round Glass Fibre Reinforced Polymer (GFRP) Bars for Concrete Reinforcement - Specification

All except Cl 5.2,5.3,6.4,6.6,6.7,7.3,8.2.4

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
(clause 5.1)(Fibre content (mass fraction))	-	18000	-
(clause 5.2)(Glass transition temperature)	-	0	-
(clause 5.3)(Degree of Cure)	-	0	-
(clause 5.4.2)(Measured cross sectional area)	-	18000	-
(Table 1)("Minimum bend radius in case of bent bars")	-	18000	-
(clause 6.1 and 8.2.3)(Ultimate Tensile force)	-	18000	-
(clause 6.2)(Tensile modulus of elasticity)	-	18000	-
(clause 6.3)(Ultimate Tensile Strain)	-	18000	-
(clause 6.4)(Transverse shear strength)	-	0	-
(clause 6.5)(Bond Strength)	-	18000	Additional 6000 for Bond Strength
(clause 6.6)(Fatigue Tensile Strength)	-	0	-
(clause 6.7)(Creep Failure)	-	0	-
(clause 7.1)("Moisture absorption (Short term & Long Term)")	-	18000	-
(clause 7.2)(Resistance to Alkaline Environment)	-	18000	-
(clause 7.3)(Longitudinal Wicking)	-	0	-
(clause 8.2.4)(Guaranteed ultimate tensile force at 90 degree and tensile modulus of elasticity of bent bar)	-	0	-
(clause 5.1)(Fibre content (mass fraction))	-	18000	-
(clause 5.2)(Glass transition temperature)	-	0	-
(clause 5.3)(Degree of Cure)	-	0	-
(clause 5.4.2)(Measured cross sectional area)	-	18000	-
(Table 1)("Minimum bend radius in case of bent bars")	-	18000	-
(clause 6.1 and 8.2.3)(Ultimate Tensile force)	-	18000	-
(clause 6.2)(Tensile modulus of elasticity)	-	18000	-
(clause 6.3)(Ultimate Tensile Strain)	-	18000	-
(clause 6.4)(Transverse shear strength)	-	0	-
(clause 6.5)(Bond Strength)	-	18000	Additional 6000 for Bond Strength
(clause 6.6)(Fatigue Tensile Strength)	-	0	-
(clause 6.7)(Creep Failure)	-	0	-
(clause 7.1)("Moisture absorption (Short term & Long Term)")	-	18000	-
(clause 7.2)(Resistance to Alkaline Environment)	-	18000	-
(clause 7.3)(Longitudinal Wicking)	-	0	-
(clause 8.2.4)(Guaranteed ultimate tensile force at 90 degree and tensile modulus of elasticity of bent bar)	-	0	-

10 Apr, 2028

-
Included w.e.f. 15.10.2025 Exclusion : "(clause 5.2) (Glass transition temperature) (clause 5.3) (Degree of Cure) (clause 6.4) (Transverse shear strength) (clause 6.6) (Fatigue Tensile Strength) (clause 6.7) (Creep Failure) (clause 7.3) (Longitudinal Wicking) (clause 8.2.4) (Guaranteed ultimate tensile force at 90 degree and tensile modulus of elasticity of bent bar) "

3655

Atckon Laboratories LLP, Bahadurgarh

8186436

IS 18800 (2023)

Stainless steel feeding bottle for infants -- Specification

ALL GRADE

19000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4.1(Carbon - IS 228 and its parts or any other intrumental/chemical methods)	-	5000	-
Cl.4.1(Silicon - IS 228 and its parts or any other intrumental/chemical methods)	-	5000	-
Cl.4.1(Manganese - IS 228 and its parts or any other intrumental/chemical methods)	-	5000	-
Cl.4.1(Nickel - IS 228 and its parts or any other intrumental/chemical methods)	-	5000	-
Cl.4.1(Chromium - IS 228 and its parts or any other intrumental/chemical methods)	-	5000	-
Cl.4.1(Sulphur - IS 228 and its parts or any other intrumental/chemical methods)	-	5000	-
Cl.4.1(Phosphorous - IS 228 and its parts or any other intrumental/chemical methods)	-	5000	-
Cl.4.1(Nitrogen - IS 228 and its parts or any other intrumental/chemical methods)	-	5000	-
Cl.4.1(Molybdenum - IS 228 and its parts or any other intrumental/chemical methods)	-	5000	-
Cl.4.1(Copper - IS 228 and its parts or any other intrumental/chemical methods)	-	5000	-
Cl.4.1(Other Elements - IS 228 and its parts or any other intrumental/chemical methods)	-	5000	-
5.1.1(Description)	-	1000	-
5.1.2(Manufacture, Workmanship, Finish and Appearance)	-	1000	-
5.1.3(Wall Thickness)	-	1000	-
5.1.4(Capacity)	-	1000	-
5.2(Mechanical Requirements)	-	3000	-
5.3.1(Leakage Test)	-	1500	-
5.3.2(Drop Test)	-	1500	-
5.3.3(Compressive Deformation Resistance)	-	3000	-
5.3.4(Permanency of Pigments of Printed Container)	-	1000	-
5.1.1(Description)	-	1000	-
5.1.2(Manufacture, Workmanship, Finish and Appearance)	-	1000	-
5.1.3(Wall Thickness)	-	1000	-
5.1.4(Capacity)	-	1000	-
5.2(Mechanical Requirements)	-	3000	-
5.3.1(Leakage Test)	-	1500	-
5.3.2(Drop Test)	-	1500	-
5.3.3(Compressive Deformation Resistance)	-	3000	-
5.3.4(Permanency of Pigments of Printed Container)	-	1000	-
Cl.5.3.4(Permanency of Pigments - Annex D of IS 18800)	-	1000	-

-
Included w.e.f. 09.10.2025

3656

PATNA SMART LAB (IOCL)

9193014

IS 1459 (2018)

Kerosene - Specification (Fourth Revision)

13050 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2-Table 1-i)(Appearance)	-	200	-
4.2-Table 1-iv)(Colour a)Saybolt (in cas of undyedKerosene)3), Min b)Visual (in case of dyed Kerosene))	-	200	-
4.2-Table 1-v)(Copper strip corrosion for 3 h at 50°C)	-	1130	-
4.2-Table 1-vi)(Density at 15°C, kg/m3)	-	1130	-
4.2-Table 1-vii)(Distillation a)Percent recovered below200°C, percent (v/v), Min b)Final boiling point, °C, Max )	-	2650	-
4.2-Table 1-viii)(Flash point ( Abel), °C, Min)	-	1900	-
4.2-Table 1-ix)(Smoke Point4), mm, Min)	-	1130	-
4.2-Table 1-x)(Total Sulphur Content, percent, m/m, Max)	-	4710	-

08 Dec, 2028

-
Scope restricted to dyed kerosene. Excluding: 4.2-Table 1-ii) (Acidity, inorganic) 4.2-Table 1-iii) (Burning quality a)Char Value, mg/kg of oil consumed, Max b)Bloom on glass Chimney) 5.1 (Packing) 5.2 (Marking)

3657

Standard Testing Laboratory Private Limited

8170106

IS 7092 : Part 1 (1992)

Aluminium alloy tubes for irrigation purposes - Specification: Part 1 welded tubes (Second Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10(Marking)	-	15000	-
5(Workmanship and Finish)	-	15000	-
8(Dimensions)	-	15000	-
7.2(Mechanical properties)	-	15000	-
7.3(Flattening test)	-	15000	-
7.4(Hydrostatic test)	-	15000	-

10 Apr, 2028

-
Included w.e.f.08.10.2025

3658

PATNA SMART LAB (IOCL)

9193014

IS 15607 (2022)

Biodiesel B-100 - Fatty Acid Methyl Esters FAME Specification Second Revision

17600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4(CFPP - ASTM D6371 / EN 16329 / IS 1448 P:110 b) Winter)	-	1900	-
4.4(CFPP - ASTM D6371 / EN 16329 / IS 1448 P:110 a) Summer)	-	1900	-
4.4(Acid value - IS 1448 P:17)	-	400	-
4.4(Copper corrosion - IS 1448 P:15 / ISO 2160)	-	1130	-
4.4(Water content - IS 1448 P:40 / ISO 3733/ ISO 12937)	-	4160	-
4.4(Sulphur - ISO 20846 / ASTM D5453)	-	4710	-
4.4(Flash point (PMCC) - IS 1448 P:21 )	-	1900	-
4.4(Kinematic viscosity at 40°C - IS 1448 P:25/ ISO3104)	-	2270	-
4.4(Density at 15 oC - IS 1448 P:16/ ISO 3675/ ISO 12185/ ASTM D4052)	-	1130	-
4.4-Table 1-i)(Appearance, visual)	-	200	-
4.4-Table 1-ii)(Colour, visual)	-	200	-
4.4-Table 1-iii)(Density at 15 °C, kg/m3)	-	1130	-
4.4-Table 1-iv)(Kinematic viscosity at 40 °C, cSt)	-	2270	-
4.4-Table 1-v)(Flash point (PMCC)1) °C, Min)	-	1900	-
4.4-Table 1-vi)(Total Sulphur, mg/kg, Max)	-	4710	-
4.4-Table 1-ix)(Water content mg/kg, Max)	-	4160	-
4.4-Table 1-xi)(Copper strip corrosion, 3 h at 50 °C, Max)	-	1130	-
4.4-Table 1-xxvi)(Cold filter plugging point (CFPP), °C Max a) summer 18 – Part 110 b) winter3))	-	1900	-
4.4-Table 1-xiii)(Acid value, mg KOH/g, Max)	-	960	-

08 Dec, 2028

-
Excluding: 4.1 (General) 4.2 (Additives) 4.3 (The materials shall be free from grit) 4.4-Table 1-vii) (Carbon residue (MCR) 2) percent by mass, Max) 4.4-Table 1-viii) (Sulfated ash, percent by mass, Max) 4.4-Table 1-x) (Total contamination, mg/kg, Max) 4.4-Table 1-xii) (Cetane No., Min) 4.4-Table 1-xiv) (Methanol, percent by mass, Max) 4.4-Table 1-xv) (Ester content, percent by mass, Min) 4.4-Table 1-xvi) (Monoglycerides content, percent by mass, Max) 4.4-Table 1-xvii) (Diglyceride content, percent by mass, Max) 4.4-Table 1-xviii) (Triglyceride content, percent by mass, Max) 4.4-Table 1-xix) (Free Glycerol percent by mass, Max) 4.4-Table 1-xx) (Total Glycerol percent by mass, Max) 4.4-Table 1-xxi) (Phosphorous mg/kg, Max) 4.4-Table 1-xxii) (Sodium + Potassium mg/kg, Max) 4.4-Table 1-xxiii) (Calcium + Magnesium mg/kg, Max) 4.4-Table 1-xxiv) (Iodine value, gm iodine/100 gm, Max) 4.4-Table 1-xxv) (Oxidation stability, at 110 °C, Min hrs. Accelerated) 4.4-Table 1-xxvii) (Linolenic acid methyl ester, percent m/m, Max) 4.4-Table 1-xxviii) (Polyunsaturated (>4 double bonds) methyl ester percent m/m, Max) 5.1 (Packing) 5.2 (Marking)

3659

Standard Testing Laboratory Private Limited

8170106

IS 1285 (2023)

WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS EXTRUDED ROUND TUBE AND HOLLOW SECTIONS FOR GENERAL ENGINEERINGPURPOSES SPECIFICATION

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.9.1(Aluminium- IS 504 and its parts or any other intrumental/chemical methods)	-	6000	-
Cl.9.1(Copper- IS 504 and its parts or any other intrumental/chemical methods)	-	6000	-
Cl.9.1(Magnesium- IS 504 and its parts or any other intrumental/chemical methods)	-	6000	-
Cl.9.1(Silicon- IS 504 and its parts or any other intrumental/chemical methods)	-	6000	-
Cl.9.1(Iron- IS 504 and its parts or any other intrumental/chemical methods)	-	6000	-
Cl.9.1(Manganese- IS 504 and its parts or any other intrumental/chemical methods)	-	6000	-
Cl.9.1(Zinc- IS 504 and its parts or any other intrumental/chemical methods)	-	6000	-
Cl.9.1(Titanium and/ or other grain refining elements- IS 504 and its parts or any other intrumental/chemical methods)	-	6000	-
Cl.9.1(Chromium- IS 504 and its parts or any other intrumental/chemical methods)	-	6000	-
Cl.9.1(Remarks (Ti+V) - IS 504 and its parts or any other intrumental/chemical methods)	-	6000	-
Cl.9.1(Remarks (Cr+Mn) - IS 504 and its parts or any other intrumental/chemical methods)	-	6000	-
Cl.9.1(Remarks (Total Impurities)- IS 504 and its parts or any other intrumental/chemical methods)	-	6000	-
6(FREEDOM FROM DEFECTS)	-	6000	-
8(DIMENSIONS AND TOLERANCES)	-	6000	-
10(MECHANICAL PROPERTIES)	-	6000	-
Cl. 9(Aluminium)	-	6000	-
Cl. 9(Copper)	-	6000	-
Cl. 9(Magnesium)	-	6000	-
Cl. 9(Silicon)	-	6000	-
Cl. 9(Iron)	-	6000	-
Cl. 9(Manganese)	-	6000	-
Cl. 9(Zinc)	-	6000	-
Cl. 9(Titanium and/or other grain refining elements)	-	6000	-
Cl. 9(Chromium)	-	6000	-
Cl. 9(Ti+V)	-	6000	-
Cl. 9(Cr+Mn)	-	6000	-
Clause-10(Tensile strength)	-	6000	-

10 Apr, 2028

-
Included w.e.f.08.10.2025

3660

Atckon Laboratories LLP, Bahadurgarh

8186436

IS 21 (2025)

Wrought Aluminium and Aluminium Alloys for Manufacture of Utensils - Specification (Fifth Revision)

All Types

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General requirements)	-	9000	-
Cl-5.1(Material)	-	9000	-
Cl-5.2(Chemical composition and mechanical properties of grades in Cl 5.1)	-	9000	-
Cl-5.3.1 a("Wrought Aluminium (with Minimum 99 Percent Al Content)- Iron+ Silicon")	-	9000	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Chromium")	-	9000	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Magnesium")	-	9000	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Manganese")	-	9000	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Nickel")	-	9000	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Zinc")	-	9000	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Titanium")	-	9000	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Tin")	-	9000	-
Cl-5.3.1 c("Wrought Aluminium (with Minimum 99 Percent Al Content)- Copper")	-	9000	-
Cl-5.3.1 Note 1("Wrought Aluminium (with Minimum 99 Percent Al Content)- Aluminium")	-	9000	-
Cl-5.3.1 d("Wrought Aluminium (with Minimum 99 Percent Al Content)- Others")	-	9000	-
Cl-5.3.2, Table-1 (i)(Wrought Aluminium Alloys-Silicon)	-	9000	-
Cl-5.3.2, Table-1 (ii)(Wrought Aluminium Alloys-Iron)	-	9000	-
Cl-5.3.2, Table-1 (iii)(Wrought Aluminium Alloys-Copper)	-	9000	-
Cl-5.3.2, Table-1 (iv)(Wrought Aluminium Alloys-Manganese)	-	9000	-
Cl-5.3.2, Table-1 (v)(Wrought Aluminium Alloys-Magnesium)	-	9000	-
Cl-5.3.2, Table-1 (vi)(Wrought Aluminium Alloys-Chromium)	-	9000	-
Cl-5.3.2, Table-1 (vii)(Wrought Aluminium Alloys-Nickel)	-	9000	-
Cl-5.3.2, Table-1 (viii)(Wrought Aluminium Alloys-Zinc)	-	9000	-
Cl-5.3.2, Table-1 (ix)(Wrought Aluminium Alloys -Zirconium)	-	9000	-
Cl-5.3.2, Table-1 (x)(Wrought Aluminium Alloys - Titanium)	-	9000	-
Cl-5.3.2, Table-1 (Note 3)(Wrought Aluminium Alloys- Aluminium)	-	9000	-
Cl-5.3.2, Table-1 (xi)(Wrought Aluminium Alloys- Others)	-	9000	-
Cl 5.4(Lead)	-	9000	-
Cl 5.4(Cadmium)	-	9000	-
Cl 5.4(Arsenic)	-	9000	-
Cl-7(Dimension)	-	9000	-
Cl-8(EARING TEST (OPTIONAL TEST))	-	9000	-

-
Included w.e.f.08.10.2025

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number