BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15393 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

3661

RTRC LIMITED, GURUGRAM

9177406

IS 12444 (2020)

Copper Wire Rods for Electrical Applications — Specification ( First Revision )

Copper Wire Rods for Electrical Applications — Specification

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1 Table-1(Te)	-	1000	-
5.1 Table-1(Se)	-	1000	-
5.1 Table-1(Bi)	-	1000	-
5.1 Table-1(Se+Te+Bi)	-	0	-
5.1 Table-1(Sb)	-	1000	-
5.1 Table-1(As)	-	1000	-
5.1 Table-1(Sn)	-	1000	-
5.1 Table-1(Pb)	-	1000	-
5.1 Table-1(Fe)	-	1000	-
5.1 Table-1(Ni)	-	1000	-
5.1 Table-1(S)	-	1000	-
5.1 Table-1(Ag)	-	1000	-
5.1 Table-1(O)	-	1000	-
5.1 Table-1(Maximum Allowable Total Impurities)	-	500	-
6.1(Dimension)	-	0	-
6.2.2(Ovality)	-	0	-
7.0(Freedom from Defects)	-	0	-
8.1(Tensile Strength)	-	2500	-
8.2(Surface Compression Test)	-	1000	-
Cl-9.1, Table-4(Volume Resistivity)	-	2500	-
Cl-9.1, Table-4(Mass Resistivity)	-	0	-
Cl-9.1, Table-4(Electrical Conductivity)	-	0	-
10.5(Microscopic Examination)	-	0	-
9.2.1.1(Electrical Properties)	-	0	-
9.2.1.2(Electrical Properties)	-	0	-
9.2.1.3(Electrical Properties)	-	0	-
13(Mechanical Strength)	-	0	-
8.2.2(Calculated resistance)	-	0	-
Cl-9.2.2(Electrical Properties)	-	0	-
7.2(Surface Oxide)	-	1500	-
Cl-9.1, Table-4(Volume Resistivity)	-	0	-
Cl-9.1, Table-4(Mass Resistivity)	-	0	-
Cl-9.1, Table-4(Electrical Conductivity)	-	0	-
10.5(Microscopic Examination)	-	0	-
9.2.1.1(Electrical Properties)	-	0	-
9.2.1.2(Electrical Properties)	-	0	-
9.2.1.3(Electrical Properties)	-	0	-
13(Mechanical Strength)	-	0	-
8.2.2(Calculated resistance)	-	0	-
Cl-9.2.2(Electrical Properties)	-	0	-
7.2(Surface Oxide)	-	0	-
Cl-9.1, Table-4(Volume Resistivity)	-	0	-
Cl-9.1, Table-4(Mass Resistivity)	-	0	-
Cl-9.1, Table-4(Electrical Conductivity)	-	0	-
10.5(Microscopic Examination)	-	0	-
9.2.1.1(Electrical Properties)	-	0	-
9.2.1.2(Electrical Properties)	-	0	-
9.2.1.3(Electrical Properties)	-	0	-
13(Mechanical Strength)	-	0	-
8.2.2(Calculated resistance)	-	0	-
Cl-9.2.2(Electrical Properties)	-	0	-
7.2(Surface Oxide)	-	0	-
Cl-9.1, Table-4(Volume Resistivity)	-	0	-
Cl-9.1, Table-4(Mass Resistivity)	-	0	-
Cl-9.1, Table-4(Electrical Conductivity)	-	0	-
10.5(Microscopic Examination)	-	0	-
9.2.1.1(Electrical Properties)	-	0	-
9.2.1.2(Electrical Properties)	-	0	-
9.2.1.3(Electrical Properties)	-	0	-
13(Mechanical Strength)	-	0	-
8.2.2(Calculated resistance)	-	0	-
Cl-9.2.2(Electrical Properties)	-	0	-
7.2(Surface Oxide)	-	0	-
Cl-9.1, Table-4(Volume Resistivity)	-	0	-
Cl-9.1, Table-4(Mass Resistivity)	-	0	-
Cl-9.1, Table-4(Electrical Conductivity)	-	0	-
10.5(Microscopic Examination)	-	0	-
9.2.1.1(Electrical Properties)	-	0	-
9.2.1.2(Electrical Properties)	-	0	-
9.2.1.3(Electrical Properties)	-	0	-
13(Mechanical Strength)	-	0	-
8.2.2(Calculated resistance)	-	0	-
Cl-9.2.2(Electrical Properties)	-	0	-
7.2(Surface Oxide)	-	0	-
Cl-9.1, Table-4(Volume Resistivity)	-	0	-
Cl-9.1, Table-4(Mass Resistivity)	-	0	-
Cl-9.1, Table-4(Electrical Conductivity)	-	0	-
10.5(Microscopic Examination)	-	0	-
9.2.1.1(Electrical Properties)	-	0	-
9.2.1.2(Electrical Properties)	-	0	-
9.2.1.3(Electrical Properties)	-	0	-
13(Mechanical Strength)	-	0	-
8.2.2(Calculated resistance)	-	0	-
Cl-9.2.2(Electrical Properties)	-	0	-
7.2(Surface Oxide)	-	0	-
Cl-9.1, Table-4(Volume Resistivity)	-	0	-
Cl-9.1, Table-4(Mass Resistivity)	-	0	-
Cl-9.1, Table-4(Electrical Conductivity)	-	0	-
10.5(Microscopic Examination)	-	0	-
9.2.1.1(Electrical Properties)	-	0	-
9.2.1.2(Electrical Properties)	-	0	-
9.2.1.3(Electrical Properties)	-	0	-
13(Mechanical Strength)	-	0	-
8.2.2(Calculated resistance)	-	0	-
Cl-9.2.2(Electrical Properties)	-	0	-
7.2(Surface Oxide)	-	0	-
Cl-9.1, Table-4(Volume Resistivity)	-	0	-
Cl-9.1, Table-4(Mass Resistivity)	-	0	-
Cl-9.1, Table-4(Electrical Conductivity)	-	0	-
10.5(Microscopic Examination)	-	0	-
9.2.1.1(Electrical Properties)	-	0	-
9.2.1.2(Electrical Properties)	-	0	-
9.2.1.3(Electrical Properties)	-	0	-
13(Mechanical Strength)	-	0	-
8.2.2(Calculated resistance)	-	0	-
Cl-9.2.2(Electrical Properties)	-	0	-
7.2(Surface Oxide)	-	0	-
Cl-9.1, Table-4(Volume Resistivity)	-	0	-
Cl-9.1, Table-4(Mass Resistivity)	-	0	-
Cl-9.1, Table-4(Electrical Conductivity)	-	0	-
10.5(Microscopic Examination)	-	0	-
9.2.1.1(Electrical Properties)	-	0	-
9.2.1.2(Electrical Properties)	-	0	-
9.2.1.3(Electrical Properties)	-	0	-
13(Mechanical Strength)	-	0	-
8.2.2(Calculated resistance)	-	0	-
Cl-9.2.2(Electrical Properties)	-	0	-
7.2(Surface Oxide)	-	0	-
Cl-9.1, Table-4(Volume Resistivity)	-	0	-
Cl-9.1, Table-4(Mass Resistivity)	-	0	-
Cl-9.1, Table-4(Electrical Conductivity)	-	0	-
10.5(Microscopic Examination)	-	0	-
9.2.1.1(Electrical Properties)	-	0	-
9.2.1.2(Electrical Properties)	-	0	-
9.2.1.3(Electrical Properties)	-	0	-
13(Mechanical Strength)	-	0	-
8.2.2(Calculated resistance)	-	0	-
Cl-9.2.2(Electrical Properties)	-	0	-
7.2(Surface Oxide)	-	0	-
Cl-9.1, Table-4(Volume Resistivity)	-	0	-
Cl-9.1, Table-4(Mass Resistivity)	-	0	-
Cl-9.1, Table-4(Electrical Conductivity)	-	0	-
10.5(Microscopic Examination)	-	0	-
9.2.1.1(Electrical Properties)	-	0	-
9.2.1.2(Electrical Properties)	-	0	-
9.2.1.3(Electrical Properties)	-	0	-
13(Mechanical Strength)	-	0	-
8.2.2(Calculated resistance)	-	0	-
Cl-9.2.2(Electrical Properties)	-	0	-
7.2(Surface Oxide)	-	0	-
Cl-9.1, Table-4(Volume Resistivity)	-	0	-
Cl-9.1, Table-4(Mass Resistivity)	-	0	-
Cl-9.1, Table-4(Electrical Conductivity)	-	0	-
10.5(Microscopic Examination)	-	0	-
9.2.1.1(Electrical Properties)	-	0	-
9.2.1.2(Electrical Properties)	-	0	-
9.2.1.3(Electrical Properties)	-	0	-
13(Mechanical Strength)	-	0	-
8.2.2(Calculated resistance)	-	0	-
Cl-9.2.2(Electrical Properties)	-	0	-
7.2(Surface Oxide)	-	0	-
Cl-9.1, Table-4(Volume Resistivity)	-	0	-
Cl-9.1, Table-4(Mass Resistivity)	-	0	-
Cl-9.1, Table-4(Electrical Conductivity)	-	0	-
10.5(Microscopic Examination)	-	0	-
9.2.1.1(Electrical Properties)	-	0	-
9.2.1.2(Electrical Properties)	-	0	-
9.2.1.3(Electrical Properties)	-	0	-
13(Mechanical Strength)	-	0	-
8.2.2(Calculated resistance)	-	0	-
Cl-9.2.2(Electrical Properties)	-	0	-
7.2(Surface Oxide)	-	0	-
Cl-9.1, Table-4(Volume Resistivity)	-	0	-
Cl-9.1, Table-4(Mass Resistivity)	-	0	-
Cl-9.1, Table-4(Electrical Conductivity)	-	0	-
10.5(Microscopic Examination)	-	0	-
9.2.1.1(Electrical Properties)	-	0	-
9.2.1.2(Electrical Properties)	-	0	-
9.2.1.3(Electrical Properties)	-	0	-
13(Mechanical Strength)	-	0	-
8.2.2(Calculated resistance)	-	0	-
Cl-9.2.2(Electrical Properties)	-	0	-
7.2(Surface Oxide)	-	0	-
Cl-9.1, Table-4(Volume Resistivity)	-	0	-
Cl-9.1, Table-4(Mass Resistivity)	-	0	-
Cl-9.1, Table-4(Electrical Conductivity)	-	0	-
10.5(Microscopic Examination)	-	0	-
9.2.1.1(Electrical Properties)	-	0	-
9.2.1.2(Electrical Properties)	-	0	-
9.2.1.3(Electrical Properties)	-	0	-
13(Mechanical Strength)	-	0	-
8.2.2(Calculated resistance)	-	0	-
Cl-9.2.2(Electrical Properties)	-	0	-
7.2(Surface Oxide)	-	0	-

03 Apr, 2027

-
Included w.e.f 16.09.2025

3662

Sleen India Biz venture Private Limited, Agra

9139736

IS 3980 (1982)

Specification for porous metal powder oil - Impregnated bearings (First Revision)

10250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2(Types )	-	500	-
3(Material )	-	2500	-
4.2(Dimensions and Tolerances)	-	1000	-
5(Manufacture, Workmanship and Finish)	-	1000	-
6(Designation )	-	250	-
7.1(Density )	-	1000	-
7.2(Porosity )	-	1500	-
7.3(Radial Crushing Strength )	-	2250	-
10(Marking)	-	250	-

-
Included w.e.f.26.08.2025

3663

TUV SUD SOUTH ASIA PRIVATE LIMITED RANIPET

6191806

IS 6719 (1972)

Solid Pvc Soles And Heels

4900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 3.1,3.2,3.3,3.4,3.5(Material)	-	500	-
Cl. 3.1,3.2,3.3,3.4,3.5(Material)	-	500	-
3.6 (i)(Relative density )	-	400	-
3.6.1(Hardness )	-	400	-
Table 1 (Flexing resistance)(Table 1 (Flexing resistance, Bennewart method, cut growth at the end of 30 000 cycles, mm, Max))	-	1200	-
Table 1 (Abrasion resistance)(Abrasion resistance at applied force of 10 N (volume loss), mm3, Max)	-	960	-
3.6 (iv)(Tear Strength a) Force Part b) Back Part )	-	480	-
3.6 (iii)(Elongation at break, percent )	-	480	-
3.6 (ii)(Tensile Strength )	-	480	-
6 ,6.1,6.2,6.3(Test Method)	-	500	-
Cl. 6.4(Measurement of thickness)	-	400	-
Table 1 Cl. 3.6, Sl No (iv)("Lead (as Pb), Shoes for infants, children and boys and girls, ppm")	-	1200	-
Table 1 Cl. 3.6, Sl No (iv)("Lead (as Pb), for other sized shoes, ppm ")	-	1200	-
Table 1 Cl. 3.6, Sl No (iii)(Volatility, Percent by mass)	-	1200	-

02 Dec, 2028

-
-

3664

Classic Testing & Research Centre (B17), Noida

8180826

IS 17550 : Part 1 (2024)

Household Refrigerating Appliances - Characteristics and Test Methods Part 1 General Requirements (First Revision)

205000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(MARKING)	-	15000	-
8(MATERIALS, DESIGN, AND MANUFACTURE)	-	15000	-
9(Testing The Air Tightness Of Door Or Lid Seal(S))	-	15000	-
10(Testing The Opening Force Of Door(S) Or Lid(S))	-	15000	-
11(Testing The Durability Of Hinges And Handles Of Door(S) And Lid(S)	-	15000	-
12(Testing The Mechanical Strength Of Shelves And Similar Components)	-	15000	-
14(Ice-Making Test (If Applicable))	-	15000	-
15(Test For Absence Of Odour And Taste)	-	20000	-
16(Safety Requirements)	-	20000	-

15 Oct, 2027

-
Included w.e.f 19.12.2025

3665

TUV SUD SOUTH ASIA PRIVATE LIMITED RANIPET

6191806

IS 13893 (1994)

Polyurethane soles semirigid - specification

4900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Design)	-	500	-
4.2 (Amendment 2)(Thickness)	-	400	-
4.3.1 Table 1 i) (Amendment 2)(Relative Density)	-	400	-
4.3.1 Table 1 ii) (Amendment 2)(Hardness, degree, Shore A)	-	400	-
4.3.1 Table 1 iii) (Amendment 2)(Abrasion Resistance at applied force of 10 N)	-	960	-
4.3.1 Table 1 iv) (Amendment 2)(Flexing Resistance, Bennewart method)	-	1200	-
4.3.1 Table 1 v) (Amendment 2)(Hydrolysis Resistance, cut growth after 150000 flexes)	-	5200	-
4.3.1 Table 1 vi) (Amendment 2)(Tensile Strength)	-	480	-
4.3.1 Table 1 vii) (Amendment 2)(Elongation at break)	-	480	-
4.3.1 Table 1 viii) (Amendment 2)(Tear Strength (average force))	-	480	-
Cl.5, 5.1, 5.2(Packing And Marking)	-	500	-
4.3.2(Ageing test)	-	4000	-

02 Dec, 2028

-
-

3666

TUV SUD SOUTH ASIA PRIVATE LIMITED RANIPET

6191806

IS 17043 : Part 2 (2024)

Shoes: Shoes for General Purpose

59900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Shape and Design)	-	400	-
Cl-5.3(Material)	-	500	-
Cl-5.4, Table-1 (i)(Bond strength, N/mm, Min Upper to outsole, N/mm, Min)	-	600	-
Cl-5.4, Table-1 (ii)(Inter layer bond strength,= N/mm, Min Midsole to outsole, N/mm, Min)	-	600	-
Cl-5.4, Table-1 (iii)(Whole shoe flexing, flexes)	-	1600	-
Cl-5.4, Table-1 (iv)(Water proofness on complete shoe)	-	2000	-
Cl-5.4, Table-1 (v)(Slip resistance, Cof(1), Min dry and wet* (quarry tile))	-	2800	-
Cl-5.4, Table-1 (vi)(Attachment strength of strap and buckle/D-ring N)	-	600	-
Cl-5.4, Table-1 (vii)(Attachment strength of strap and velcro , N, Min)	-	600	-
Cl-5.4, Table-1 (viii)(Strength of eyelet attachment, N, Min)	-	600	-
Cl-5.4, Table-1 (ix)(Heel pull off strength, N, Min)	-	600	-
Cl-5.4, Table-1 (x)(Top piece attachment strength, N, Min)	-	600	-
Cl-5.4, Table-1 (xi)(Seam strength, N/mm, Min)	-	440	-
Cl-5.4, Table-1 (xii)(Whole shoe topline strength, N, Min)	-	600	-
Cl-5.4, Table-1 (xiii)(Abrasion resistance (volume loss), mm3)	-	960	-
Cl-5.4, Table-1 (xvi)(Hydrolysis resistance,(4) cut growth at 150 000 flexes, mm, Max)	-	5200	-
Cl-6.1.1, Table-2 (i)(Tear trength, N)	-	440	-
Cl-6.1.1, Table-2 (ii)(Flexing resistance, flexes)	-	1000	-
Cl-6.1.1, Table-2 (iii)(Colour fastness to rubbing (marring/staining))	-	480	-
Cl-6.1.1, Table-2 (iv)(Colour fastness to water (contact method- multi fabrics))	-	480	-
Cl-6.1.1, Table-2 (v)(Water vapour permeability,mg/cm2 /h, Min Water vapour coefficient,mg/cm2 , Min)	-	1000	-
Cl-6.1.1, Table-2 (vi)(Stitch tear strength, N/mm, Min)	-	440	-
Cl-6.1.1, Table-2 (vii)(Abrasion resistance)	-	800	-
Cl-6.1.2, Table-3 (i)(Colour fastness to light, Marring, Min)	-	800	-
Cl-6.1.2, Table-3 (ii)(Water resistance)	-	800	-
Cl-6.1.2, Table-3 (iii)(Flexing resistance, flexes at (-) 5 °C 25 000 flexes)	-	1200	-
Cl-6.1.3, Table- 4 (i)(Breaking strength, N/mm, Min Elongation at break, percent, Min)	-	440	-
Cl-6.1.3, Table- 4 (ii)(Tear Strength, N, Min)	-	440	-
Cl-6.1.3, Table- 4 (iii)(Strength at needle perforation, N/mm, Min)	-	440	-
Cl-6.1.3, Table- 4 (iv)(Flexing resistance, Flexes)	-	1000	-
Cl-6.1.3, Table- 4 (v)(Water vapour permeability (WVP), mg/cm2 /h, Min)	-	1000	-
Cl-6.1.3, Table- 4 (vi)(Hydrolysis resistance)	-	5200	-
Cl-6.1.3, Table- 4 (vii)(Abrasion resistance)	-	800	-
Cl-6.1.4, Table-5 (i)(Colour fastness to light, Marring, Min)	-	800	-
Cl-6.1.4, Table- 5 (ii)(Flexing resistance, flexes at (-) 5 ºC, s 25 000 flexes)	-	1200	-
Cl-6.2, Table-6 (i)(Tear strength, N, Min)	-	440	-
Cl-6.2, Table-6 (ii)(Abrasion resistance)	-	800	-
Cl-6.2, Table-6 (iii)(Colour fastness rubbing (crocking))	-	480	-
Cl-6.2, Table-6 (iv)(Colour fastness to perspiration)	-	480	-
Cl-6.2, Table-6 (v)(Water vapour permeability, mg/cm2 /h, Min Water vapour coefficient, mg/cm2, Min)	-	1800	-
Cl-6.3, Table-7 (i)(Flexing index, Min)	-	800	-
Cl-6.3, Table-7 (ii)(Abrasion resistance at 400 cycles)	-	800	-
Cl-6.3, Table-7 (iii)(Water absorption, mg/cm2 , Min Water desorption, percent, Min)	-	800	-
Cl-6.4, Table-8 (i)(Thickness, mm, Min)	-	400	-
Cl-6.4, Table-8 (ii)(Abrasion resistance)	-	800	-
Cl-6.4, Table-8 (iii)(Water absorption, mg/cm2 , Min Water desorption, percent, Min)	-	800	-
Cl-6.5.1, , Table-9 (i)(Flexing resistance)	-	1200	-
Cl-6.5.1, , Table-9 (ii)(Hydrolysis resistance, cut growth at 150 000 flexes, mm, Max)	-	5200	-
Cl-6.5.1, , Table-9 (iii)(Compression set, percent, Max)	-	800	-
Cl-6.5.2.1, Table-10 (i)(Grain crack index, Min)	-	500	-
Cl-6.5.2.1, Table-10 (ii)(Density, g/cm3 , Min)	-	400	-
Cl-6.5.2.1, Table-10 (iii)(Abrasion resistance, mm/kcs, Max)	-	1200	-
Cl-6.5.2.2, Table-11 (i)(Water resistance, (dynamic method))	-	1000	-
Cl-6.5.2.3, Table-12 (i)(Hardness, Min)	-	400	-
Cl-6.5.2.3, Table-12 (ii)(Density, g/cm3 , Max)	-	400	-
Cl-6.5.2.3, Table-12 (iii)(Abrasion resistance (volume loss), mm3 , Max)	-	960	-
Cl-6.5.2.3, Table-12 (iv)(Bond Strength between Rubber top-lift and adjacent material, N/mm, Min)	-	600	-
Cl-6.6, Table-13 (i)(Heat shrinkage, percent, Max)	-	800	-
Cl-6.6, Table-13 (ii)(Split tear strength, kg/25 mm, Min)	-	480	-
Cl-6.6, Table-13 (iii)(Compression set, percent, Max)	-	800	-
Cl-6.7, Table-14 (i)(Hardness, N)	-	400	-
Cl-6.7, Table-14 (ii)(Resilience, percent)	-	1000	-
Cl-6.7, Table-14 (iii)(Moisture resistance, percent)	-	1000	-
Cl-6.7, Table-14 (iv)(Area shape retention, percent (a) Initial, Min b) After 10 collapsing load, Min)	-	1000	-
Cl-6.7, Table-14 (v)(Adhesion strength, N/mm)	-	1000	-
Cl-6.8, Table-15 (i)(Peel strength, N/mm a) Initial, Min b) After 5 000 wear cycles, Min)	-	2750	-
Cl- 6.8, Table-15 (ii)(a) Shear strength, kPa b) Initial, Min)	-	600	-
Cl- 6.9, Table-16 (i)(Limit of useful extension, percent, Min)	-	1000	-
Cl- 6.9, Table-16 (ii)(Needle strength, N/mm, Min)	-	440	-
Cl-6.10, Table-17 (i)(Lace breaking strength, N, Min)	-	600	-
Cl-6.10, Table-17 (ii)(Lace tag strength, N, Min)	-	600	-
Cl-6.10, Table-17 (iii)(Lace to lace abrasion resistance, cycles)	-	1200	-
Cl-6.10, Table-17 (iv)(Colour fastness to water for lace contact methodstaining Gray scale rate , Min)	-	480	-
Cl-6.10, Table-17 (v)(Corrosion resistance)	-	800	-
Cl-6.11, Table-18 (i)(Fatigue resistance, cycles, Min)	-	480	-
Cl-6.11, Table-18 (ii)(Security of puller attachment strength, N, Min)	-	480	-
Cl-6.11, Table-18 (iii)(Lateral load, N, Min)	-	480	-
Cl-6.11, Table-18 (iv)(End attachment strength, N, Min)	-	480	-
CL. 5.4, Table 1, Sl No (xv)("Lead content (as Pb) ppm, Max (applicable only for PVC")	-	1200	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(i)(Allergenic and carcinogenic disperse dyes)	-	2800	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	2400	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	2400	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(iv)(Chromium (VI))	-	1200	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(v)(Dimethyl fumarate (DMFU))	-	2800	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(vi)(Formaldehyde (free or released by partial hydrolysis))	-	960	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(vii)(Formaldehyde)	-	960	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(viii)(Organotin compounds)	-	4000	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(ix)(PCP-TeCP-TriCP polychlorophenols)	-	2800	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(x)(pH)	-	400	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(xi)(Phthalates (each individual phthalate))	-	6400	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(xii)(Nickel, on skin contact)	-	1600	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	2800	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	2800	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	2800	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	2800	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	2800	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	2800	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	2800	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	2800	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	2800	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	2800	-
Shoes: Shoes for General Purpose(Organotin: Monobutyltin)	-	2800	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	2800	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	2800	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	2800	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	2800	-
Cl.1.4.1 of IS 17011(DMFU)	-	2800	-
Cl. No.8.6.1,Table 1 of IS 17011(Chromium)	-	1200	-
Cl. No.8.6.1,Table 1 of IS 17011(Formaldehyde (free or released by partial hydrolysis))	-	960	-
Cl. No.8.6.1,Table 1 of IS 17011(pH)	-	400	-
Cl. No.8.6.1,Table 1 of IS 17011(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	1600	-
Cl.4.1 (Table B-1 Sl I)(Aromatic Amines: 4-aminobiphenyl)	-	2400	-
Cl.4.1 (Table B-1 Sl II)(Aromatic Amines: Benzidine)	-	2400	-
Cl.4.1 (Table B-1 Sl III)(Aromatic Amines: 4-chloro-o-toluidine)	-	2400	-
Cl.4.1 (Table B-1 Sl IV)(Aromatic Amines: 2-naphthylamine)	-	2400	-
Cl.4.1 (Table B-1 Sl V)(Aromatic Amines :o- aminoazotoluene)	-	2400	-
Cl.4.1 (Table B-1 Sl VI)(Aromatic Amines: 2-amino-4-nitrotoluenem)	-	2400	-
Cl.4.1 (Table B-1 Sl VII)(Aromatic Amines: p-chloroaniline)	-	2400	-
Cl.4.1 (Table B-1 Sl VIII)(Aromatic Amines: 2,4-diaminoanisole)	-	2400	-
Cl.4.1 (Table B-1 Sl X)(Aromatic Amines : 3,3’-dichlorobenzidine)	-	2400	-
Cl.4.1 (Table B-1 Sl XI)(Aromatic Amines : 3,3’-dimethoxybenzidine)	-	2400	-
Cl.4.1 (Table B-1 Sl XII)(Aromatic Amines : 3,3’-dimethylbenzidine)	-	2400	-
Cl.4.1 (Table B-1 Sl XIII)(Aromatic Amines: 3,3’-dimethyl-4,4’-diaminodiphenylmethane)	-	2400	-
Cl.4.1 (Table B-1 Sl XIV)(Aromatic Amines : p-cresi)	-	2400	-
Cl.4.1 (Table B-1 Sl XV)(Aromatic Amines : 4,4’-methylene-bis(2-chloroaniline):)	-	2400	-
Cl.4.1 (Table B-1 Sl XVI)(Aromatic Amines :4,4’-oxydianiline)	-	2400	-
Cl.4.1 (Table B-1 Sl XVII)(Aromatic Amines:4,4’-thiodianiline)	-	2400	-
Cl.4.1 (Table B-1 Sl XVIII)(Aromatic Amines :o-toluidine:)	-	2400	-
Cl.4.1 (Table B-1 Sl XIX)(Aromatic Amines: 2,4-toluylendiamine)	-	2400	-
Cl.4.1 (Table B-1 Sl XX)(Aromatic Amines: 2,4,5-trimethylaniline)	-	2400	-
Cl.4.1 (Table B-1 Sl XXI)(Aromatic Amines :2,4-dimethylaniline)	-	2400	-
Cl.4.1 (Table B-1 Sl XXII)(Aromatic Amines: 2,6-dimethylaniline:)	-	2400	-
Cl.4.1 (Table B-1 Sl XXIV)(Aromatic Amines :4-aminoazobenzene)	-	2400	-
Cl.4.1 (Table B-3 Sl I)(Allergenic Disperse Dyes :Disperse blue 3)	-	2800	-
Cl.4.1 (Table B-3 Sl II)(Allergenic Disperse Dyes :Disperse blue 7)	-	280	-
Cl.4.1 (Table B-3 Sl III)(Allergenic Disperse Dyes :Disperse blue 26)	-	2800	-
Cl.4.1 (Table B-3 Sl IV)(Allergenic Disperse Dyes :Disperse blue 102)	-	2800	-
Cl.4.1 (Table B-3 Sl V)(Allergenic Disperse Dyes: Disperse brown 1)	-	2800	-
Cl.4.1 (Table B-3 Sl VI)(Allergenic Disperse Dyes :Disperse yellow 1)	-	2800	-
Cl.4.1 (Table B-3 Sl VII)(Allergenic Disperse Dyes :Disperse yellow 9)	-	2800	-
Cl.4.1 (Table B-3 Sl VIII)(Allergenic Disperse Dyes :Disperse yellow 39)	-	2800	-
Cl.4.1 (Table B-3 Sl IX)(Allergenic Disperse Dyes :Disperse yellow 49)	-	2800	-
Cl.4.1 (Table B-3 Sl X)(Allergenic Disperse Dyes :Disperse orange 1)	-	2800	-
Cl.4.1 (Table B-3 Sl XI)(Allergenic Disperse Dyes :Disperse red 11)	-	2800	-
Cl.4.1 (Table B-3 Sl XII)(Allergenic Disperse Dyes :Disperse red 17)	-	2800	-
Cl.4.1 (Table B-3 Sl XIII)(Allergenic Disperse Dyes :Disperse yellow 7)	-	2800	-
Cl.4.1 (Table B-3 Sl XIV)(Allergenic Disperse Dyes :Disperse yellow 56)	-	2800	-
Cl.4.1 (Table B-3 Sl XV)(Allergenic Disperse Dyes :Disperse red 151)	-	2800	-
Cl.4.1 (Table B-3 Sl XVI)(Allergenic Disperse Dyes :Solvent red 23)	-	2800	-
Cl.4.1 (Table B-4 Sl I)(Carcinogenic Disperse Dyes :Navy blue)	-	2800	-
Cl.4.1 (Table B-4 Sl II)(Carcinogenic Disperse Dyes: Disperse blue 1)	-	2800	-
Cl.4.1 (Table B-4 Sl III)(Carcinogenic Disperse Dyes: Disperse blue 35)	-	2800	-
Cl.4.1 (Table B-4 Sl IV)(Carcinogenic Disperse Dyes :Disperse blue 106)	-	2800	-
Cl.4.1 (Table B-4 Sl V)(Carcinogenic Disperse Dyes: Disperse blue 124)	-	2800	-
Cl.4.1 (Table B-4 Sl VI)(Carcinogenic Disperse Dyes :Disperse yellow 3)	-	2800	-
Cl.4.1 (Table B-4 Sl VII)(Carcinogenic Disperse Dyes: Disperse orange 3)	-	2800	-
Cl.4.1 (Table B-4 Sl VIII)(Carcinogenic Disperse Dyes :Disperse orange 37/59/76a))	-	2800	-
Cl.4.1 (Table B-4 Sl IX)(Carcinogenic Disperse Dyes :Disperse red 1)	-	2800	-
Cl.4.1 (Table B-4 Sl X)(Carcinogenic Disperse Dyes :Basic red 9)	-	2800	-
Cl.4.1 (Table B-4 Sl XI)(Carcinogenic Disperse Dyes :Violet 3)	-	2800	-
Cl.4.1 (Table B-4 Sl XII)(Carcinogenic Disperse Dyes Disperse yellow 23)	-	2800	-
Cl.4.1 (Table B-3)(Allergenic and Carcinogenic Disperse Dyes)	-	2800	-
Cl.4.1 (Table B-11)(PCP-TeCP-TriCP polychlorophenols)	-	2800	-
Cl-8.1(Marking)	-	500	-
CL. 5.4, Table 1, Sl No (xiv) & Table 1 of IS 17011(pH, Min)	-	400	-
Cl-5.4, Table-1 (xiv)(Chemical requirements(3))	-	30000	-
Cl-5.4, Table-1 (xv)(Lead content (as Pb) ppm, Max)	-	1200	-
Cl.4.1 (Table B-1 Sl XXIII)(Aromatic Amines :2-methoxyaniline)	-	2800	-

02 Dec, 2028

-
-

3667

TUV SUD SOUTH ASIA PRIVATE LIMITED RANIPET

6191806

IS 10702 (2023)

Hawai Chappal-Specification

33900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Material)	-	500	-
4.2(Length)	-	500	-
4.3(Thickness)	-	400	-
Cl-4.4, Table -1 S. No-1 (i) (Amendment No-1)(Compression set at constant stress)	-	800	-
Cl-4.4, Table -1 S. No-1 (ii) (Amendment No-1)(Split tear strength)	-	480	-
Cl-4.4, Table -1 S. No-1 (iii) (a)(Amendment No-1)("Shrinkage at Shrinkage at 50 °C ± 1 °C for 2 h for polymeric material, percent, Max ")	-	800	-
Cl-4.4, Table -1 S. No-1 (iii)(b) (Amendment No-1)(Shrinkage at 100 °C ± 1 °C for 1 h for rubber, percent, Max)	-	800	-
Cl-4.4, Table -1 S. No-1 (v) (Amendment No-1)(Flexing resistance: Maximum cut growth,)	-	1200	-
Cl-4.4, Table -1 S. No-1 (iv) (Amendment No-1)(Abrasion resistance at applied force)	-	960	-
Cl-4.4, Table -1 S. No-1 (vi) (Amendment No-1)(Hydrolysis resistance:Maximum cut growth)	-	5200	-
Cl-4.4, Table -2 S. No-1 (i), a (Amendment No-1)("Breaking strength for Strap to strap 1-Solid strap 2-Cellular strap")	-	480	-
Cl-4.4, Table -2 S. No-1 (i), b (Amendment No-1)("Breaking strength for Toe portion to strap 1-Solid strap 2-Cellular strap")	-	480	-
Cl-4.4, Table -2 S. No-1 (i), c (Amendment No-1)("Elongation at break , percent, Min 1-Solid strap 2-Cellular strap")	-	480	-
Cl-4.4, Table -3 S. No-1 (i), (Amendment No-1)(Toe post attachment strength)	-	600	-
Cl-4.4, Table -3 S. No-1 (ii), (Amendment No-1)(Attachment strength of rear strap)	-	600	-
Cl-4.4, Table -3 S. No-1 (iii), (Amendment No-1)(Inter layer bond strength)	-	600	-
Cl. No.5.1,Table no.1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	5600	-
Cl. No.5.1,Table no.1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	2400	-
Cl. No.5.1,Table no.1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	2400	-
Cl. No.5.1,Table no.1 of IS 17011(iv)(Chromium (VI))	-	1200	-
Cl. No.5.1,Table no.1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	2800	-
Cl. No.5.1,Table no.1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	960	-
Cl. No.5.1,Table no.1 of IS 17011(vii)(Formaldehyde)	-	960	-
Cl. No.5.1,Table no.1 of IS 17011(viii)(Organotin compounds)	-	4000	-
Cl. No.5.1,Table no.1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	2800	-
Cl. No.5.1,Table no.1 of IS 17011(x)(pH)	-	400	-
Cl. No.5.1,Table no.1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	4000	-
Cl. No.5.1,Table no.1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	1600	-
Cl.No. 5.2(lead content)	-	1200	-
5(CHEMICAL REQUIREMENT FOR HAWAI CHAPPAL)	-	23100	-
Cl-4.4, Table -1 S. No-1 (vii) (Amendment No-1)(Chemical requirements)	-	23100	-
Cl-4.4, Table -1 S. No-1 (viii) (Amendment No-1)("Lead content (as Pb), ppm, Max")	-	1200	-
Cl-4.4, Table -2 S. No-1 (ii), (Amendment No-1)(Chemical requirements)	-	1200	Only for Lead test
Cl-4.4, Table -2 S. No-1 (iii), (Amendment No-1)(Lead content (as Pb), in ppm, Max)	-	1200	-
Cl.4.4 - Table No 1 - Sl. No.-vii(pH- IS 1390:2022)	-	400	-
Cl.4.4 - Table No 1 - Sl. No.-viii("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	1200	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	2800	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	2800	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	2800	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	2800	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	2800	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	2800	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	2800	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	4000	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	4000	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	4000	-
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	4000	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	4000	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	4000	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	4000	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	4000	-
Hawai Chappal-Specification(Formaldehyde (free or released by partial hydrolysis))	-	960	-
Cl. No.8.6.1,Table 1 of IS 17011(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	1600	-
Cl.8 - Table No 1(Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988)	-	1200	-
Cl.4.1 (Table B-3)(Allergenic and Carcinogenic Disperse Dyes)	-	5600	-
Cl.4.1 (Table B-1 Sl I)(Aromatic Amines: 4-aminobiphenyl)	-	2400	-
Cl.4.1 (Table B-1 Sl II)(Aromatic Amines: Benzidine)	-	2400	-
Cl.4.1 (Table B-1 Sl III)(Aromatic Amines: 4-chloro-o-toluidine)	-	2400	-
Cl.4.1 (Table B-1 Sl IV)(Aromatic Amines: 2-naphthylamine)	-	2400	-
Cl.4.1 (Table B-1 Sl V)(Aromatic Amines :o-aminoazotoluene)	-	2400	-
Cl.4.1 (Table B-1 Sl VI)(Aromatic Amines: 2-amino-4-nitrotoluenem)	-	2400	-
Cl.4.1 (Table B-1 Sl VII)(Aromatic Amines: p-chloroaniline)	-	2400	-
Cl.4.1 (Table B-1 Sl VIII)(Aromatic Amines: 2,4-diaminoanisole)	-	2400	-
Cl.4.1 (Table B-1 Sl IX)(Aromatic Amines : 4,4’- diaminodiphenylmethane:)	-	2400	-
Cl.4.1 (Table B-1 Sl X)(Aromatic Amines : 3,3’-dichlorobenzidine)	-	2400	-
Cl.4.1 (Table B-1 Sl XI)(Aromatic Amines : 3,3’-dimethoxybenzidine)	-	2400	-
Cl.4.1 (Table B-1 Sl XII)(Aromatic Amines : 3,3’-dimethylbenzidine)	-	2400	-
Cl.4.1 (Table B-1 Sl XIII)(Aromatic Amines: 3,3’-dimethyl-4,4’-diaminodiphenylmethane)	-	2400	-
Cl.4.1 (Table B-1 Sl XIV)(Aromatic Amines : p-cresidine)	-	2400	-
Cl.4.1 (Table B-1 Sl XV)(Aromatic Amines : 4,4’-methylene-bis(2-chloroaniline):)	-	2400	-
Cl.4.1 (Table B-1 Sl XVI)(Aromatic Amines :4,4’-oxydianiline)	-	2400	-
Cl.4.1 (Table B-1 Sl XVII)(Aromatic Amines:4,4’-thiodianiline)	-	2400	-
Cl.4.1 (Table B-1 Sl XVIII)(Aromatic Amines :o-toluidine:)	-	2400	-
Cl.4.1 (Table B-1 Sl XIX)(Aromatic Amines: 2,4-toluylendiamine)	-	2400	-
Cl.4.1 (Table B-1 Sl XX)(Aromatic Amines: 2,4,5-trimethylaniline)	-	2400	-
Cl.4.1 (Table B-1 Sl XXI)(Aromatic Amines :2,4-dimethylaniline)	-	2400	-
Cl.4.1 (Table B-1 Sl XXII)(Aromatic Amines: 2,6-dimethylaniline:)	-	2400	-
Cl.4.1 (Table B-1 Sl XXIII)(Aromatic Amines :2-methoxyaniline)	-	2400	-
Cl.4.1 (Table B-1 Sl XXIV)(Aromatic Amines :4-aminoazobenzene)	-	2400	-
Cl-4 ((Amendment No-1)(Category And Type)	-	500	Actual Charge based on Material
6(MARKING AND PACKING)	-	500	Actual Charge based on Material
Clause 4.1 - 4.1.1(Bottom Material)	-	500	Actual Charge based on Material
Clause 4.1 - 4.1.2(Strap Material)	-	500	Actual Charge based on Material
Clause 4.1 - 4.1.3(Material)	-	500	Actual Charge based on Material
Clause 4.3 - 4.3.2(Thickness)	-	400	Actual Charge based on Material
Clause 4.1 - 4.1.4(Material)	-	500	Actual Charge based on Material
Clause 4.2(Material)	-	500	Actual Charge based on Material

02 Dec, 2028

-
-

3668

TUV SUD SOUTH ASIA PRIVATE LIMITED RANIPET

6191806

IS 3735 (1996)

Canvas Shoes, Rubber Sole

15900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4.5 Consolidation Test IS 3400 (Part 5) : 1986 (From the quarter, cut a strip of 25.0 ± 0.5 mm width along the leagth of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30N (3.0 kgf) for each of the teat piecea (see Note under 4.4).')	-	1000	-
CL.4.6 Mass(The mass of one pair of finished shoes of size 8 shall not exceed 750 g with an increase or decrease of 25 g for each bigger or smaller size respectively)	-	500	-
Cl.4.4 Adhesion Test(From the upper-foxing portion where it is adhered to the canvas, parallel to the waist of sole, cut a strip of length 100 mm and width 8 mm. Separate out the plies initially by breaking the bond to a length of about 75 mm. Carry out the test on two specimens in accordance with IS 3400 (Part 5) : 1986. There shall be no further separation within 1 minute at a load of 1 kg for each of the two specimens.)	-	600	-
Cl.4.3.8( A rubber foxing shall be fixed all round the sole and heel. The colour shall be as agreed to between the purchaser and the supplier. )	-	1000	-
Cl.4.3.8(The foxing, not less than 18 mm wide, shall not extend beyond the edges of the sole at the bottom)	-	500	-
Cl.4.3.5( Five pairs of eyelets shall be fitted in each shoe. The eyelets shall be properly clenched without any distortion. It shall properly match the colour of the upper canvas, or as agreed to between the purchaser and the supplier.)	-	500	-
Cl.4.3.3( The counter shall be stitched at the back, set from bottom of lining and bound flat on top edge with white/scoured binding material cut in bias and formed as a tape. T )	-	500	-
Cl.4.3.3(he number of stitches shall be 30 to 40 per decimetre. The counter binding shall meet the binding of the upper at the centre top edge of the heel.)	-	500	-
Cl.4.3.3(The edges of quarter shall be bound with dyed cotton binding material or matching to the colour of the upper, cut in bias and formed as a tape.)	-	500	-
Cl.'4.3.2( Back of the upper shall be reinforced with a strip of upper material when there is a seam.')	-	500	-
CL.4.2 Shape and Design IS 1638 : 1969(Cl 4.2.1 The shoes shall be made according to design and pattern as agreed to between the purchaser and the supplier. Size and fittings of the shoes shall be in accordance with IS 1638 : 1969 unless otherwise specified by the purchaser.)	-	500	-
Cl.4.2.2( The recommended design of canvas shoes is shown in Fig. 1.)	-	500	-
Cl.4.1.6.2 Ageing col 4 of Table 5.(The shoes shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the shoes shall conform to the physical requirements prescribed in col 4 of Table 5. )	-	4000	-
Cl.4.1.6.2 Ageing (None of the rubber components of the shoes shall show any sign of tackiness or crack developed after ageing, when examined visually)	-	1000	-
" CL. 5.1, Cl. 5.2, Cl. 5.2.1, Cl. 5.2.1.1(Packing and marking ")	-	500	-
4.1.1 (Drill) (End & Picks/dm)	-	500	-
4.1.1 (canvas )(Breaking Load )	-	440	-
4.1.1 (canvas )(End & Picks/dm)	-	500	-
4.1.1.1(Colorfastness to light )	-	800	-
4.1.6(Elongation at break )	-	440	-
4.1.6(Tensile strength)	-	440	-
4.1.6(Hardness (after accelerated ))	-	400	-
4.1.6(Flexing resistance test)	-	1200	-
4.1.6(Hardness )	-	400	-
4.1.6(Relative density)	-	400	-
Cl.4.1.6.2 Ageing col 4 of Table 5.(The shoes shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the shoes shall conform to the physical requirements prescribed in col 4 of Table 5. )	-	4000	-
Cl.4.1.6.2 Ageing (None of the rubber components of the shoes shall show any sign of tackiness or crack developed after ageing, when examined visually)	-	1000	-
4.1.1 Upper, Sl No. (i) of Table 1(The upper shall consist of over layer of cotton, manmade or blended conforming' to the requirements given in Sl No. (i) of Table 1 as an overlayer and cotton drill conforming to the requirements given in Sl No. (ii) of Table 1, as an inner layer or lining. The two fabrics shall be firmly adhered together with rubber compound. )	-	500	-
Cl.4.1.2 Binding Material(IS 1954 : 1990) (IS1969 : 1985)(Cotton tape NEWAR used as binding material shall conform to the requirements prescribed in col 3 of Table 2, when tested in accordance with the methods referred to in col 4 of the table.)	-	500	-
Cl.4.3 Construction Cl 4.3.1( The upper shall be stitched on a lock stitch machine and the number of stitches shall be 30 to 40 per dm.)	-	500	-
Cl.4.3.3( The counter shall be stitched at the back, set from bottom of lining and bound flat on top edge with white/scoured binding material cut in bias and formed as a tape. T )	-	500	-
Cl.4.3.3(he number of stitches shall be 30 to 40 per decimetre. The counter binding shall meet the binding of the upper at the centre top edge of the heel.)	-	500	-
Cl.4.3.3(The edges of quarter shall be bound with dyed cotton binding material or matching to the colour of the upper, cut in bias and formed as a tape.)	-	500	-
Cl.4.3.4 (The vantp shall be strengthened with a rubber toe-cap (see Fig. 1).)	-	500	-
Cl.4.3.6( The shoes shall be free from folds, wrinkles in the upper, blisters, embedded foreign matters and excessive surface markings. In appearance, general workmanship, finish and all other respects, not defined in the standard, the shoes shall be similar to the sample approved by the purchaser, if any)	-	500	-
CL.4.3.7( The soles shall be of even substance and ofone layer only.)	-	500	-
Cl.4.3.8( A rubber foxing shall be fixed all round the sole and heel. The colour shall be as agreed to between the purchaser and the supplier. )	-	500	-
Cl.4.3.8(The foxing, not less than 18 mm wide, shall not extend beyond the edges of the sole at the bottom)	-	500	-
Cl.4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast todaylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454: 1985. However in case of dispute the method prescribed in IS 686 : 1985 shall be considered as referee method.)	-	1400	-
Cl.4.1.2.1 Anmex B.(Cotton, manmade or blended shall be used as binding material.' 'Coloured cotton tapes shall have fastness to day light of rating as and if agreed to between the purchaser and the supplier when tested in accordance with IS 686 : 1985. The black tapes shall be free from sulphur dyes when tested in accordance with Annex B.')	-	500	-
Cl.4.1.4(.Brass, steel or aluminium eyelets of 7.5 mm diameter and wall thickness 0.30 to 0.35 mm shall be used.')	-	500	-
Cl.4.1.5 Laces( The shoes shall be provided with fabric braided laces either matching the shade of the upper or black or The length of the lace shall be 60 ± 3 cm )	-	500	-
Cl.4.1.5 Laces(and shallhave the breaking strength of not less than 250 N when tested between 18 cm grips in accordance with IS 1969 : 1985, the rate of traverse of power actuated grip being 300 mm/min.)	-	600	-
Cl.4.1.5 Laces Annex B(In case the laces are black, the same shall pass the test for freedom from sulpher dyes when tested in accordance with Annex B. The two ends of the lace shall be provided with suitable metal or plastic tips.)	-	400	-
Cl.4.1.6 Rubber Components(The rubber components shall conform to the requirements given in Table 4, when tested from finished boots.However in case it is not possible to cut the test pieces from the made up boots then 4.1.5.3 of IS 13695 : 1993 shall be followed.')	-	500	-
Cl.4.1 (Table B-3 Sl I)(Allergenic and Carcinogenic Disperse Dyes)	-	5600	-
Cl.4.1 (Table B-11)(PCP-TeCP-TriCP polychlorophenols)	-	2800	-

02 Dec, 2028

-
(Clause 4.1.2.1 & 4.1.2.2 - Mechanical Laundering)

3669

Aaditech Test and Calibration Lab LLP

8179926

IS 302 : Part 2 : Sec 6 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 6 cooking ranges, hobs, ovens and similar appliances (First Revision)

Their rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral, and 480 V for other appliances.

17000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	500	-
7.0(Marking and instructions)	-	1000	-
8.0(Protection against access to live part test)	-	500	-
9.0(Starting of motor-operated appliances test)	-	0	-
10.0(Power Input and current test)	-	500	-
11.0(Heating test)	-	1000	-
13.0(Leakage current and electric strength test)	-	1000	-
14.0(Transient voltages)	-	0	-
15.0(Moisture Resistance)	-	2000	-
16.0(Leakage current and electric strength test)	-	1000	-
17.0(Overload protection of transformers test)	-	0	-
18.0(Endurance test)	-	0	-
19.0(Abnormal Operations)	-	1000	-
20.0(Stability and Mechanical Hazards)	-	500	-
21.0(Mechanical Strength)	-	500	-
22.0(Construction verification related tests)	-	500	-
23.0(Internal wiring)	-	500	-
24.0(Components)	-	500	-
25.0(Supply connections and External Flexible Cords)	-	1000	-
26.0(Terminal for External Conductors)	-	500	-
27.0(Provision for Earthing)	-	500	-
28.0(Screws and connections)	-	500	-
29.0(Clearances and Creepage distances and solid insulation)	-	500	-
30.0(Resistance to heat and fire)	-	2000	-
31.0(Resistance to rusting)	-	1000	-
32.0(Radiation, Toxicity and Similar hazards)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
4(General Requirements)	-	0	-
5(General condition for the tests)	-	0	-
22.111(Pyrolytic self-cleaning)	-	0	-
6.0(Classification)	-	0	-
7.0(Marking and instructions)	-	0	-
8.0(Protection against access to live part test)	-	0	-
9.0(Starting of motor-operated appliances test)	-	0	-
10.0(Power Input and current test)	-	0	-
11.0(Heating test)	-	0	-
13.0(Leakage current and electric strength test)	-	0	-
14.0(Transient voltages)	-	0	-
15.0(Moisture Resistance)	-	0	-
16.0(Leakage current and electric strength test)	-	0	-
17.0(Overload protection of transformers test)	-	0	-
18.0(Endurance test)	-	0	-
19.0(Abnormal Operations)	-	0	-
20.0(Stability and Mechanical Hazards)	-	0	-
21.0(Mechanical Strength)	-	0	-
22.0(Construction verification related tests)	-	0	-
23.0(Internal wiring)	-	0	-
24.0(Components)	-	0	-
25.0(Supply connections and External Flexible Cords)	-	0	-
26.0(Terminal for External Conductors)	-	0	-
27.0(Provision for Earthing)	-	0	-
28.0(Screws and connections)	-	0	-
29.0(Clearances and Creepage distances and solid insulation)	-	0	-
30.0(Resistance to heat and fire)	-	0	-
31.0(Resistance to rusting)	-	0	-
32.0(Radiation, Toxicity and Similar hazards)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
4(General Requirements)	-	0	-
5(General condition for the tests)	-	0	-
22.111(Pyrolytic self-cleaning)	-	0	-
6.0(Classification)	-	0	-
7.0(Marking and instructions)	-	0	-
8.0(Protection against access to live part test)	-	0	-
9.0(Starting of motor-operated appliances test)	-	0	-
10.0(Power Input and current test)	-	0	-
11.0(Heating test)	-	0	-
13.0(Leakage current and electric strength test)	-	0	-
14.0(Transient voltages)	-	0	-
15.0(Moisture Resistance)	-	0	-
16.0(Leakage current and electric strength test)	-	0	-
17.0(Overload protection of transformers test)	-	0	-
18.0(Endurance test)	-	0	-
19.0(Abnormal Operations)	-	0	-
20.0(Stability and Mechanical Hazards)	-	0	-
21.0(Mechanical Strength)	-	0	-
22.0(Construction verification related tests)	-	0	-
23.0(Internal wiring)	-	0	-
24.0(Components)	-	0	-
25.0(Supply connections and External Flexible Cords)	-	0	-
26.0(Terminal for External Conductors)	-	0	-
27.0(Provision for Earthing)	-	0	-
28.0(Screws and connections)	-	0	-
29.0(Clearances and Creepage distances and solid insulation)	-	0	-
30.0(Resistance to heat and fire)	-	0	-
31.0(Resistance to rusting)	-	0	-
32.0(Radiation, Toxicity and Similar hazards)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
4(General Requirements)	-	0	-
5(General condition for the tests)	-	0	-
22.111(Pyrolytic self-cleaning)	-	0	-
6.0(Classification)	-	0	-
7.0(Marking and instructions)	-	0	-
8.0(Protection against access to live part test)	-	0	-
9.0(Starting of motor-operated appliances test)	-	0	-
10.0(Power Input and current test)	-	0	-
11.0(Heating test)	-	0	-
13.0(Leakage current and electric strength test)	-	0	-
14.0(Transient voltages)	-	0	-
15.0(Moisture Resistance)	-	0	-
16.0(Leakage current and electric strength test)	-	0	-
17.0(Overload protection of transformers test)	-	0	-
18.0(Endurance test)	-	0	-
19.0(Abnormal Operations)	-	0	-
20.0(Stability and Mechanical Hazards)	-	0	-
21.0(Mechanical Strength)	-	0	-
22.0(Construction verification related tests)	-	0	-
23.0(Internal wiring)	-	0	-
24.0(Components)	-	0	-
25.0(Supply connections and External Flexible Cords)	-	0	-
26.0(Terminal for External Conductors)	-	0	-
27.0(Provision for Earthing)	-	0	-
28.0(Screws and connections)	-	0	-
29.0(Clearances and Creepage distances and solid insulation)	-	0	-
30.0(Resistance to heat and fire)	-	0	-
31.0(Resistance to rusting)	-	0	-
32.0(Radiation, Toxicity and Similar hazards)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
4(General Requirements)	-	0	-
5(General condition for the tests)	-	0	-
22.111(Pyrolytic self-cleaning)	-	0	-

-
Included w.e.f. 21.08.2025 Exclusion: "19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.4 (Surge immunity test) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Harmonics) 32.0 (Radiation, Toxicity and Similar hazards) "

3670

Atckon Laboratories LLP, Bahadurgarh

8186436

IS 1117 (2018)

Laboratory glassware - Single - Volume pipettes (Second Revision)

all

13500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.1&3(Marking)	-	500	-
3(Class of Accuracy)	-	500	-
4.1(Nominal capacities)	-	500	-
4.2(Accuracy)	-	500	-
5.1(Material)	-	500	-
5.1(Material)	-	500	-
5.1.1(Limit of Alkalinity)	-	500	-
5.2(Pattern of Pipette)	-	500	-
5.3(Workmanship & Finish)	-	500	-
5.4(i) Distance of graduation line from top of pipette.)	-	500	-
5.4(ii) Distance from graduation line to top of bulb(pattern 2))	-	500	-
5.4(iii)Distance from graduation line to tip of jet (Pattern 1))	-	500	-
5.4(iv) Wall thickness)	-	500	-
5.4(a) pattern 2 pipette of 1 and 2ml )	-	500	-
5.4(b) Other pipettes)	-	500	-
5.4(v) Dia. of safety bulb (if provided ))	-	500	-
5.4(vi)Distance from top of pipette to bottom of safety bulb )	-	500	-
5.4(vii) Overall length, L)	-	500	-
5.4(viii) Length of suction tube, L1 )	-	500	-
5.4(ix) Length of delivery tube, L2 )	-	500	-
5.4(x) Internal dia. of suction tube D1 )	-	500	-
5.4(xi) External dia. of bulb D2 )	-	500	-
5.4(xii) External dia. of delivery tube D3 )	-	500	-
5.5(Delivery Time)	-	500	-
5.5(Delivery Time)	-	500	-
5.6&7(Graduation line & Visibility )	-	500	-
6.1.2(Marking)	-	500	-
6.1.1&3(Marking)	-	500	-
3(Class of Accuracy)	-	500	-
4.1(Nominal capacities)	-	500	-
4.2(Accuracy)	-	500	-
5.1(Material)	-	500	-
5.1(Material)	-	500	-
5.1.1(Limit of Alkalinity)	-	500	-
5.2(Pattern of Pipette)	-	500	-
5.3(Workmanship & Finish)	-	500	-
5.4(i) Distance of graduation line from top of pipette.)	-	500	-
5.4(ii) Distance from graduation line to top of bulb(pattern 2))	-	500	-
5.4(iii)Distance from graduation line to tip of jet (Pattern 1))	-	500	-
5.4(iv) Wall thickness)	-	500	-
5.4(a) pattern 2 pipette of 1 and 2ml )	-	500	-
5.4(b) Other pipettes)	-	500	-
5.4(v) Dia. of safety bulb (if provided ))	-	500	-
5.4(vi)Distance from top of pipette to bottom of safety bulb )	-	500	-
5.4(vii) Overall length, L)	-	500	-
5.4(viii) Length of suction tube, L1 )	-	500	-
5.4(ix) Length of delivery tube, L2 )	-	500	-
5.4(x) Internal dia. of suction tube D1 )	-	500	-
5.4(xi) External dia. of bulb D2 )	-	500	-
5.4(xii) External dia. of delivery tube D3 )	-	500	-
5.5(Delivery Time)	-	500	-
5.5(Delivery Time)	-	500	-
5.6&7(Graduation line & Visibility )	-	500	-
6.1.2(Marking)	-	500	-
6.1.1&3(Marking)	-	500	-
3(Class of Accuracy)	-	500	-
4.1(Nominal capacities)	-	500	-
4.2(Accuracy)	-	500	-
5.1(Material)	-	500	-
5.1(Material)	-	500	-
5.1.1(Limit of Alkalinity)	-	500	-
5.2(Pattern of Pipette)	-	500	-
5.3(Workmanship & Finish)	-	500	-
5.4(i) Distance of graduation line from top of pipette.)	-	500	-
5.4(ii) Distance from graduation line to top of bulb(pattern 2))	-	500	-
5.4(iii)Distance from graduation line to tip of jet (Pattern 1))	-	500	-
5.4(iv) Wall thickness)	-	500	-
5.4(a) pattern 2 pipette of 1 and 2ml )	-	500	-
5.4(b) Other pipettes)	-	500	-
5.4(v) Dia. of safety bulb (if provided ))	-	500	-
5.4(vi)Distance from top of pipette to bottom of safety bulb )	-	500	-
5.4(vii) Overall length, L)	-	500	-
5.4(viii) Length of suction tube, L1 )	-	500	-
5.4(ix) Length of delivery tube, L2 )	-	500	-
5.4(x) Internal dia. of suction tube D1 )	-	500	-
5.4(xi) External dia. of bulb D2 )	-	500	-
5.4(xii) External dia. of delivery tube D3 )	-	500	-
5.5(Delivery Time)	-	500	-
5.5(Delivery Time)	-	500	-
5.6&7(Graduation line & Visibility )	-	500	-
6.1.2(Marking)	-	500	-
4.1(unit of volume)	-	500	-
4.2(delivery volume)	-	500	-
4.3(reference temperature)	-	500	-
5.1(Types and Classes of accuracy)	-	500	-
5.2(Types of single- volume pipette)	-	500	-
Clause- 6.0(Maximum Permissible error)	-	500	-
7.1(Material)	-	500	-
7.2(Shape)	-	500	-
7.3(Bulb)	-	500	-
7.4(Dimensions)	-	500	-
7.5(Top of Pipette)	-	500	-
7.6(Delivery Jet)	-	500	-
7.7(Delivery Time)	-	500	-
7.8(Waiting Time)	-	500	-
Clause- 8.0(Graduation Line)	-	500	-
Clause- 9.0(Setting of the Meniscus)	-	500	-
Clause-10.0(Marking)	-	500	-
Cl-7.4, Table-2 (i)(Overall length)	-	500	-
Cl-7.4, Table-2 (ii)(Internal diameter at the graduation line)	-	500	-
Cl-7.4, Table-2 (iii)(Length of suction tube⎯ valid only for bulb pattern pipettes)	-	500	-
Cl-7.4, Table-2 (iv)(Length of delivery tube ⎯ valid only for bulb pattern pipettes)	-	500	-
Cl-7.4, Table-2 (v)(External diameter of delivery tube ⎯ valid only for bulb pattern pipettes)	-	500	-
Cl-7.4, Table-2 (vi)(External diameter of bulb ⎯ valid only for bulb pattern pipettes)	-	500	-
Cl-7.4, Table-2 (vii)(External diameter of tube ⎯ valid only for straight pattern pipettes)	-	500	-
Cl-7.4, Table-3 (i)(Distance of graduation line from top of pipette (one-mark pipettes))	-	500	-
Cl-7.4, Table-3 (ii)(Distance from graduation line to tip of jet (one-mark pipettes) ⎯ valid only for straight pattern pipettes)	-	500	-
Cl-7.4, Table-3 (iii)(Distance from graduation line to tip of jet (one-mark pipettes) ⎯ valid only for straight pattern pipettes)	-	500	-
Cl-7.4, Table-3 (iv)(Wall thickness (one-mark pipettes) ⎯ bulb pattern pipettes)	-	500	-
Cl-7.4, Table-3 (v)(Wall thickness (one-mark pipettes) ⎯ straight pattern pipettes)	-	500	-
Cl-7.4, Table-4 (i)(Distance of upper graduation line from top of pipette (two-mark pipettes))	-	500	-
Cl-7.4, Table-4 (ii)(Distance of upper graduation line from top of pipette (two-mark pipettes))	-	500	-
Cl-7.4, Table-4 (iii)(Distance from upper graduation line to tip of jet (two-mark pipettes) ⎯ valid only for straight pattern pipettes)	-	500	-
Cl-7.4, Table-4 (iv)(Distance from lower graduation line to bottom of bulb (two-mark pipettes))	-	500	-
Cl-7.4, Table-4 (v)(Distance from lower graduation line to tip of jet (two-mark pipettes))	-	500	-
Cl-7.4, Table-4 (vi)(Wall thickness (two-mark pipettes) ⎯ bulb pattern pipettes)	-	500	-
Cl-7.4, Table-4 (vii)(Wall thickness (two-mark pipettes) ⎯ straight pattern pipettes)	-	500	-
Cl-11(Visibility of graduation lines, figures and inscriptions)	-	500	-
Cl-12(Colour coding)	-	500	-
Cl-12(Colour coding)	-	500	-

19 Jun, 2028

-
Included w.e.f 18.08.2025

3671

Sleen India Biz venture Private Limited, Agra

9139736

IS 4215 (1983)

Specification for ring type needle bearings (First Revision)

14250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2(Types )	-	250	-
3(Material)	-	4000	-
4(Hardness)	-	1500	-
5.1(Dimensions for radial, without inner rings )	-	3000	-
5.2(Dimensions for radial, with inner rings )	-	0	Complete Test price for cl.5 dimension is 3000/-.
5.3(Dimensions for bearing without inner rings)	-	0	Complete Test price for cl.5 dimension is 3000/-.
5.4(Dimensions for bearing with inner rings )	-	0	Complete Test price for cl.5 dimension is 3000/-.
5.5(Dimensions for needle bearings without outer rings)	-	0	Complete Test price for cl.5 dimension is 3000/-.
5.6(Dimensions for needle thrust bearings)	-	0	Complete Test price for cl.5 dimension is 3000/-.
5.7(Dimensions for combined needle bearings)	-	0	Complete Test price for cl.5 dimension is 3000/-.
5.8(Dimensional tolerances for needle bearing )	-	0	Complete Test price for cl.5 dimension is 3000/-.
6(Designation )	-	250	-
7(Workmanship and Finish)	-	2500	-
8(Packing and Marking)	-	250	-

-
Included w.e.f.26.08.2025

3672

EKO PRO ENGINEERS PRIVATE LIMITED (32/41), GHAZIABAD

9179706

IS 1989 : Part 2 (1986)

Specification for leather safety boots and shoes: Part 2 for heavy metal industries (Fourth Revision)

ALL

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Marking)	-	500	-
7(Design)	-	500	-
8(a) Upper Leather)	-	400	-
8(b) Lining Leather)	-	400	-
8(c) Bottom Material)	-	500	-
8(d) Steel Toe Cap)	-	400	-
8(e) Tape)	-	300	-
8(f) Bottom Filling)	-	400	-
8(g) Eyelet)	-	300	-
8(h) Toe Compound)	-	400	-
8(i) Threads)	-	300	-
8(j) Rivets)	-	400	-
8(k) Screw Wire)	-	500	-
8(l) Heel Pin)	-	500	-
8(m) Shank)	-	500	-
8(n) Laces)	-	400	-
8(o) Tongue Lining)	-	500	-
8(p) Adhesive)	-	300	-
8(q) Strengthening Piece)	-	300	-
8(r) Leather Components)	-	500	-
9(Manufacture)	-	400	-
10(Finish)	-	300	-
11(a) Boots with Leather Sole and Heel)	-	500	-
11(b) Boots with Rubber Sole and Heel)	-	400	-
12(Performance Test)	-	400	-
13(Design)	-	500	-
14(a) Upper Leather)	-	400	-
14(b) Lining Leather)	-	500	-
14(c) Bottom Material)	-	400	-
14(d) Steel Toe Cap)	-	400	-
14(e) Tape)	-	400	-
14(f) Bottom Filling)	-	500	-
14(g) Eyelet)	-	500	-
14(h) Toe Compound)	-	400	-
14(i) Threads)	-	300	-
14(j) Rivets)	-	300	-
14(k) Screw Wire)	-	400	-
14(l) Heel Pin)	-	400	-
14(m) Shank)	-	400	-
14(n) Laces)	-	400	-
14(o) Tongue Lining)	-	400	-
14(p) Adhesive)	-	400	-
14(q) Leather Components)	-	400	-
15(Manufacture)	-	300	-
16(Finish)	-	400	-
17(a) Shoes with Leather Sole and Heel)	-	500	-
17(b) Shoes with Rubber Sole and Heel)	-	500	-
18(Performance Test)	-	1000	-
4(Marking)	-	300	-
7(Design)	-	400	-
8(a) Upper Leather)	-	1000	-
8(b) Lining Leather)	-	1000	-
8(c) Bottom Material)	-	1000	-
8(d) Steel Toe Cap)	-	400	-
8(e) Tape)	-	500	-
8(f) Bottom Filling)	-	1000	-
8(g) Eyelet)	-	400	-
8(h) Toe Compound)	-	400	-
8(i) Threads)	-	400	-
8(j) Rivets)	-	400	-
8(k) Screw Wire)	-	300	-
8(l) Heel Pin)	-	300	-
8(m) Shank)	-	300	-
8(n) Laces)	-	400	-
8(o) Tongue Lining)	-	400	-
8(p) Adhesive)	-	400	-
8(q) Strengthening Piece)	-	400	-
8(r) Leather Components)	-	400	-
9(Manufacture)	-	400	-
10(Finish)	-	400	-
11(a) Boots with Leather Sole and Heel)	-	400	-
11(b) Boots with Rubber Sole and Heel)	-	400	-
12(Performance Test)	-	500	-
13(Design)	-	400	-
14(a) Upper Leather)	-	400	-
14(b) Lining Leather)	-	400	-
14(c) Bottom Material)	-	500	-
14(d) Steel Toe Cap)	-	400	-
14(e) Tape)	-	400	-
14(f) Bottom Filling)	-	400	-
14(g) Eyelet)	-	500	-
14(h) Toe Compound)	-	500	-
14(i) Threads)	-	400	-
14(j) Rivets)	-	400	-
14(k) Screw Wire)	-	300	-
14(l) Heel Pin)	-	400	-
14(m) Shank)	-	300	-
14(n) Laces)	-	300	-
14(o) Tongue Lining)	-	300	-
14(p) Adhesive)	-	300	-
14(q) Leather Components)	-	500	-
15(Manufacture)	-	400	-
16(Finish)	-	400	-
17(a) Shoes with Leather Sole and Heel)	-	500	-
17(b) Shoes with Rubber Sole and Heel)	-	500	-
18(Performance Test)	-	1000	-
4(Marking)	-	400	-
7(Design)	-	400	-
8(a) Upper Leather)	-	400	-
8(b) Lining Leather)	-	400	-
8(c) Bottom Material)	-	300	-
8(d) Steel Toe Cap)	-	400	-
8(e) Tape)	-	300	-
8(f) Bottom Filling)	-	400	-
8(g) Eyelet)	-	300	-
8(h) Toe Compound)	-	400	-
8(i) Threads)	-	400	-
10(Finish)	-	400	-
8(j) Rivets)	-	400	-
8(k) Screw Wire)	-	300	-
8(l) Heel Pin)	-	400	-
8(m) Shank)	-	400	-
8(n) Laces)	-	300	-
8(o) Tongue Lining)	-	300	-
8(p) Adhesive)	-	400	-
8(q) Strengthening Piece)	-	400	-
8(r) Leather Components)	-	500	-
9(Manufacture)	-	400	-
11(a) Boots with Leather Sole and Heel)	-	400	-
11(b) Boots with Rubber Sole and Heel)	-	400	-
12(Performance Test)	-	1000	-
13(Design)	-	400	-
14(a) Upper Leather)	-	400	-
14(b) Lining Leather)	-	300	-
14(c) Bottom Material)	-	400	-
14(d) Steel Toe Cap)	-	400	-
14(e) Tape)	-	300	-
14(f) Bottom Filling)	-	400	-
14(g) Eyelet)	-	400	-
14(h) Toe Compound)	-	400	-
14(i) Threads)	-	300	-
14(j) Rivets)	-	400	-
14(k) Screw Wire)	-	300	-
14(l) Heel Pin)	-	300	-
14(m) Shank)	-	400	-
14(n) Laces)	-	400	-
14(o) Tongue Lining)	-	400	-
14(p) Adhesive)	-	500	-
14(q) Leather Components)	-	400	-
15(Manufacture)	-	500	-
16(Finish)	-	400	-
17(a) Shoes with Leather Sole and Heel)	-	300	-
17(b) Shoes with Rubber Sole and Heel)	-	400	-
18(Performance Test)	-	1000	-

-
Included w.e.f.18.08.2025

3673

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS 302 : Part 2 : Sec 74 (2024)

Household and Similar Electrical Appliancesï¿½Safety Part 2 Particular Requirements Section 74 Portable immersion heaters

175000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	500	Additional Testing Charge For EMI/EMC:- 20,0000/-
8(Protection against access to live parts)	-	2500	-
10(Power input and current)	-	5000	-
10(Power input and current)	-	5000	-
11(Heating)	-	10000	-
13.1 &13.2(Leakage current test)	-	5000	-
13.1 &13.3(Electric strength test)	-	5000	-
14(Transient overvoltages)	-	5000	-
15(Moisture resistance)	-	5000	-
15.3(Moisture resistance)	-	10000	-
16.1 &16.2(Leakage current test)	-	5000	-
16.1 & 16.3(Electric strength test)	-	0	-
17(Overload protection of transformers and associated circuits)	-	5000	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	10000	-
20.1(Stability and mechanical hazards)	-	5000	-
20.2(Stability and mechanical hazards)	-	0	-
21(Mechanical strength)	-	2500	-
22(Construction)	-	5000	-
23(Internal wiring)	-	5000	-
24(Components)	-	5000	-
24.101(Components)	-	0	-
25("Supply connection and external flexible cords")	-	5000	-
26("Terminals for external conductors")	-	5000	-
27(Provision for earthing)	-	5000	-
28(Screws and connections)	-	5000	-
29("Clearances, creepage distances and solid insulation")	-	5000	-
30(Resistance to heat and fire)	-	5000	-
30.101(Resistance to heat and fire)	-	0	-
31(Resistance to rusting)	-	2500	-
32("Radiation, toxicity and similar hazards")	-	2500	-
Cl 19.11.4.1(Electrostatic discharges)	-	25000	-
Cl 19.11.4.2(Radiated fields)	-	45000	-
Cl 19.11.4.3(Fast transient bursts)	-	25000	-
Cl 19.11.4.4(Voltage surges)	-	25000	-
Cl 19.11.4.5(Immunity to conducted disturbances)	-	30000	-
Cl 19.11.4.6(Voltage dips and interruptions)	-	25000	-
Cl 19.11.4.7(Harmonics and inter-harmonics)	-	25000	-
Cl 19.11.4.8(Abnormal operation)	-	10000	-

-
Included w.e.f.21.08.2025

3674

Stellar Test House, Noida

8171606

IS 427 (2013)

Distemper, dry, colour as required - Specification (Third Revision)

All Grade and Types

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3.1(Lead restriction)	-	500	-
4.2.2 & 7, Table-1(iv)(Colour)	-	1000	-
4.2.2 & 7, Table-1(v)(Fastness to light)	-	1500	-
4.2.2 & 7, Table-1(vii)(Recoating properties)	-	500	-
4.2.2 & 7, Table-1(viii)(Resistance to alkali)	-	500	-
4.2.2 & 7, Table-1(ix)(Resistance to dry rubbing)	-	500	-
4.1(Form and Condition)	-	200	-
4.2.1(Composition)	-	300	-
4.2.2 & 7, Table-1(i)(Drying time)	-	500	-
4.2.2 & 7, Table-1(ii)(Consistency)	-	500	-
4.2.2 & 7, Table-1(iii)(Finish)	-	500	-
4.2.2 & 7, Table-1(vi)(Residue on seive)	-	1000	-

26 Sep, 2028

-
Included w.e.f. 14.08.2025

3675

PAAM Testing Labs Private Limited, Greater Noida

8185506

IS 14735 (1999)

Unplasticized Polyvinyl Chloride (UPVC) Injection Moulded Fittings for Soil and Waste Discharge System for Inside and Outside Buildings Including Ventilation and Rain Water System -

11500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
19(Marking)	-	100	-
3(Type of Fitting)	-	100	-
4(Size Designation)	-	100	-
5(Colour of fittings)	-	200	-
7.1,Table 1(Wall thickness)	-	500	-
7.2 ,Table 2&3(Socket Dimensions)	-	1000	-
7.3(Dimensions of waste trap(Nahani Trap)	-	500	-
8(Sealing Rings)	-	1000	-
10(Workmanship)	-	200	-
11(Design requirements)	-	200	-
11.1(Solvent cement type or Rubber ring type)	-	1000	-
11.2(Socket and spigot configeration)	-	500	-
11.4,Table 5(Vent cowl)	-	500	-
11.5,Table 6(Pipe Clips)	-	500	-
12(Physical test requirements)	-	0	-
12.1(Visual appearance)	-	200	-
12.2(Stress relief test)	-	1500	-
12.3(Vicat softening tempewrature)	-	1500	-
Cl.13, IS 12235 (P-7)-2004, (Resistance to Sulphuric Acid)	-	1500	-
Cl.14, Annex A(Titanium Di-Oxide Content)	-	2000	-
Cl.15, Annex B(Sulphated Ash Content)	-	1500	-
16(Mechanical Properties)	-	5000	-
16.1(Impact test)	-	2000	-
17(Watet tightness of joint)	-	1000	-
12.4(Effect on water test)	-	5000	-
7.4(Chamfer)	-	500	-
11.3(Access Openings)	-	500	-
Table 4(Dimension of Access Openings)	-	500	-
Cl 12.4(Effect on Water Lead (first extraction))	-	0	-
Cl 12.4(Effect on Water Lead (third extraction))	-	0	-
Cl 12.4(Effect on Water Dialkyl tin C4 and higher homologues(measured as tin )(third extraction ))	-	0	-
Cl 12.4(Effect on Water Cadmium (mean of first extraction, second extraction and third extraction))	-	0	-
Cl 12.4(Effect on Water Mercury (mean of first extraction, second extraction and third extraction))	-	0	-
19(Marking)	-	0	-
3(Type of Fitting)	-	0	-
4(Size Designation)	-	0	-
5(Colour of fittings)	-	0	-
7.1,Table 1(Wall thickness)	-	0	-
7.2 ,Table 2&3(Socket Dimensions)	-	0	-
7.3(Dimensions of waste trap(Nahani Trap)	-	0	-
8(Sealing Rings)	-	0	-
10(Workmanship)	-	0	-
11(Design requirements)	-	0	-
11.1(Solvent cement type or Rubber ring type)	-	0	-
11.2(Socket and spigot configeration)	-	0	-
11.4,Table 5(Vent cowl)	-	0	-
11.5,Table 6(Pipe Clips)	-	0	-
12(Physical test requirements)	-	0	-
12.1(Visual appearance)	-	0	-
12.2(Stress relief test)	-	0	-
12.3(Vicat softening tempewrature)	-	0	-
Cl.13, IS 12235 (P-7)-2004, (Resistance to Sulphuric Acid)	-	0	-
Cl.14, Annex A(Titanium Di-Oxide Content)	-	0	-
Cl.15, Annex B(Sulphated Ash Content)	-	0	-
16(Mechanical Properties)	-	0	-
16.1(Impact test)	-	0	-
17(Watet tightness of joint)	-	0	-
12.4(Effect on water test)	-	0	-
7.4(Chamfer)	-	0	-
11.3(Access Openings)	-	0	-
Table 4(Dimension of Access Openings)	-	0	-
Cl 12.4(Effect on Water Lead (first extraction))	-	0	-
Cl 12.4(Effect on Water Lead (third extraction))	-	0	-
Cl 12.4(Effect on Water Dialkyl tin C4 and higher homologues(measured as tin )(third extraction ))	-	0	-
Cl 12.4(Effect on Water Cadmium (mean of first extraction, second extraction and third extraction))	-	0	-
Cl 12.4(Effect on Water Mercury (mean of first extraction, second extraction and third extraction))	-	0	-

08 May, 2028

-
included w.e.f 11-12-2025.

3676

TUV SUD SOUTH ASIA PRIVATE LIMITED RANIPET

6191806

IS 15844 : Part 3 (2024)

Sports Footwear Part 3 Professional Sports Footwear

79900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(Design)	-	500	-
Cl-6(Size and Fittings)	-	500	-
Cl.7.1.1(Upper to Mid Sole/Out Sole, Upper to Composite Sole (Applicable Only When the Sole is Composite) and Out Sole to Mid Sole (Multilayer, if Present), Bond Performance)	-	600	-
Cl.7.1.2(Energy Absorption at Seat Region)	-	800	-
Cl.7.1.3(Complete Shoe Flexing)	-	1600	-
Cl.7.1.4(Washability)	-	2000	-
Cl.7.1.5(Slip Resistance)	-	2800	-
Cl.7.1.6(Heel Drop)	-	600	-
Cl.7.2 Table-2 S.No- (i)("Flexing resistance, Min a) Dry condition b) Wet condition")	-	1000	-
Cl.7.2 Table-2 S.No- (ii)(Tear strength (average force), N, Min)	-	440	-
Cl.7.2 Table-2 S.No- (iii)("Colour fastness rubbing a-Dry b-Wet")	-	480	-
Cl.7.2 Table-2 S.No- (iv)("a) Water vapour permeability b) Water vapour coefficient")	-	2800	-
Cl.7.2 Table-2 S.No- (v)(Stitch tear strength N/mm, Min)	-	440	-
Cl.7.2 Table-2 S.No- (vi)(Colour fastness to light grey scale rate)	-	800	-
Cl.7.2 Table-2 S.No- (vii)(Tensile strength)	-	440	-
Cl.7.2 Table-2 S.No- (viii)(Elongation at break, percent)	-	440	-
Cl.7.2 Table-2 S.No- (ix)("Abrasion test a) Dry b) Wet")	-	800	-
Cl.7.2 Table-3 S.No- (i)(Breaking strength, N/mm, Min)	-	440	-
Cl.7.2 Table-3 S.No- (ii)(Elongation at break, percent, Min)	-	440	-
Cl.7.2 Table-3 S.No- (iii)(Tear strength, N, Min)	-	440	-
Cl.7.2 Table-3 S.No- (iv)(Strength at needle perforation)	-	440	-
Cl.7.2 Table-3 S.No- (v)("Flexing resistance a-Dry condition, b) Wet condition")	-	1000	-
Cl.7.2 Table-3 S.No- (vi)("a) Water vapour permeability b) Water vapour coefficient")	-	2800	-
Cl.7.2 Table-3 S.No- (vii)(Hydrolysis resistance)	-	4000	-
Cl.7.2 Table-3 S.No- (viii)(Colour fastness to light grey scale rate)	-	800	-
Cl.7.2 Table-3 S.No- (ix)(Bursting strength)	-	440	-
Cl.7.3 Table-4 S.No- (i)(Tear strength, N, Min)	-	440	-
Cl.7.3 Table-4 S.No- (ii)("Abrasion resistance, a) Dry b) Wet ")	-	800	-
Cl.7.3 Table-4 S.No- (iii)(Colour fastness to rubbing, grey scale rate with 10 rubs on dry or wet, Min)	-	480	-
Cl.7.3 Table-4 S.No- (iv)(Colour fastness to perspiration (contact method) grey scale rate, Min)	-	480	-
Cl.7.3 Table-4 S.No- (v)("a-Water vapour permeability b-Water vapour coefficient")	-	2800	-
Cl.7.4 Table-5 S.No- (i)(Flexing index, Min)	-	400	-
Cl.7.4 Table-5 S.No- (ii)(Abrasion resistance)	-	800	-
Cl.7.4 Table-5 S.No- (iii)("a) Water absorption b) Water desorption")	-	800	-
Cl.7.5 Table-6 S.No- (i)("Abrasion resistance a) Dry condition b) Wet condition")	-	800	-
Cl.7.5 Table-6 S.No- (ii)("a) Water absorption b) Water desorption")	-	800	-
Cl.7.5 Table-6 S.No- (iii)(Heat resistance shrinkage linear, percent, Max)	-	800	-
Cl.7.6 Table-7 S.No- (i)(Abrasion resistance)	-	960	-
Cl.7.6 Table-7 S.No- (ii)("Flexing resistance a) Bennewart Method b) Ross flexing method")	-	1200	-
Cl.7.6 Table-7 S.No- (iii)(Hydrolysis resistance)	-	5200	-
Cl.7.6 Table-7 S.No- (iv)(Tear strength, N/mm, Min)	-	480	-
Cl.7.6 Table-7 S.No- (v)(Tensile strength)	-	480	-
Cl.7.6 Table-7 S.No- (vi)(Elongation at break percent, Min)	-	480	-
Cl.7.6 Table-7 S.No- (vii)(Compression set percent, Max)	-	800	-
Cl.7.7 Table-8 S.No- (i)("Compression set, percent, Max a) For EVA b) For all other material")	-	800	-
Cl.7.7 Table-8 S.No- (ii)(Split tear strength)	-	440	-
Cl.7.7 Table-8 S.No- (iii)(Heat shrinkage, percent, Ma)	-	800	-
Cl.7.7 Table-8 S.No- (iv)(Elongation at break, percent, Min)	-	440	-
Cl.7.8 Table-9 S.No- (i)(First dry collapsing load, hardness, N, Min)	-	1000	-
Cl.7.8 Table-9 S.No- (ii)(Resilience, percent, Min)	-	1000	-
Cl.7.8 Table-9 S.No- (iii)(Moisture resistance, percent, Min)	-	1000	-
Cl.7.8 Table-9 S.No- (iv)("a) Initial dry area shape retention, percent, Min b) Area shape retention after 10th collapse, dry, percent, Min ")	-	1000	-
Cl.7.8 Table-9 S.No- (v)(Peel strength, N/nm, Min)	-	1000	-
Cl.7.9 Table-10 S.No- (i)("Peel strength, N/mm, Min a) Initial b) After 5 000 wear cycles")	-	2400	-
Cl.7.9 Table-10 S.No- (ii)("Shear strength, kPa, Min a) Initial b) After 5 000 wear cycles")	-	2400	-
Cl.7.10 Table-11 S.No- (i)(Limit of useful extension, percent, Min)	-	1000	-
Cl.7.10 Table-11 S.No- (ii)(Needle strength, N/mm, Min)	-	440	-
Cl.7.11 Table-12 S.No- (i)(Breaking strength of lace)	-	600	-
Cl.7.11 Table-12 S.No- (ii)(Lace tag strength)	-	600	-
Cl.7.11 Table-12 S.No- (iii)(Lace to lace abrasion)	-	1200	-
Cl.7.11 Table-12 S.No- (iv)(Colour fastness to water (for lace) (Contact method))	-	480	-
Cl.7.11 Table-12 S.No- (v)(Strength of buckle/ski hook/D-ring,)	-	600	-
Cl.7.11 Table-12 S.No- (vi)("Corrosion resistance (applicable for all including decorative metal part) ")	-	800	-
Cl.7.11 Table-13 S.No- (i)(Corrosion resistance (applicable for metallic spikes))	-	800	-
Cl-7.12.1, Table no. 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	5600	-
Cl-7.12.1, Table no. 1 of IS 17011,(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	2400	-
Cl-7.12.1, Table no. 1 of IS 17011,(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	2400	-
Cl-7.12.1, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	1200	-
Cl-7.12.1, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	2800	-
Cl-7.12.1, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	960	-
Cl-7.12.1, Table no. 1 of IS 17011,(vii)(Formaldehyde)	-	960	-
Cl-7.12.1, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	4000	-
Cl-7.12.1, Table no. 1 of IS 17011,(ix)(PCP-TeCP-TriCP polychlorophenols)	-	2800	-
Cl-7.12.1, Table no. 1 of IS 17011,(x)(pH)	-	400	-
Cl-7.12.1, Table no. 1 of IS 17011,(xi)(Phthalates (each individual phthalate))	-	4000	-
C-7.12.1, Table no. 1 of IS 17011,(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	1600	-
Cl-7.12.2(PVC is present in sports shoe)	-	1200	-
Cl-7.12.1, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	4000	-
Cl-7.12.1, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	960	-
Cl-7.12.1, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	2800	-
Cl-7.12.1, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	1200	-
Cl- 8.1(Marking)	-	500	-

02 Dec, 2028

-
-

3677

Sleen India Biz venture Private Limited, Agra

9139736

IS 14478 (1997)

Plain bearings - Thick - Walled bushes, plain and flange type, full - Round (without any joint or slit) - Specification

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Dimensions)	-	1000	-
5.1(Tolerances)	-	1000	-
6(Material )	-	2500	-
7(Lubrication oil holes and oil grooves)	-	500	-
8(Surface roughiness)	-	3000	-
9(Designation)	-	500	-
10(Marking)	-	500	-
11(Packing)	-	500	-

-
Included w.e.f.26.08.2025

3678

Aaditech Test and Calibration Lab LLP

8179926

IS 302 : Part 2 : Sec 3 (2024)

Household and Similar Electrical Appliances âSafety Part 2 Particular Requirements Section 3 Electric Irons (Second Revision)

Rated voltage being not more than 250V include direct current (DC) supplied appliances and battery-operated appliances.

21000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General requirement)	-	0	-
Cl-7(Marking and instructions)	-	1000	-
Cl-8(Protection against access to live parts)	-	500	-
Cl-10(Power input and current)	-	1000	-
Cl-11(Heating)	-	2000	-
Cl-12(Charging of metal-ion batteries)	-	0	-
Cl-13(Leakage current and electric strength at operating temperature)	-	1000	-
Cl-14(Transient overvoltages)	-	0	-
Cl-15(Moisture resistance)	-	2000	-
Cl-16(Leakage current and electric strength)	-	1000	-
Cl-17(Overload protection of transformers and associated circuits)	-	0	-
Cl-18(Endurance)	-	0	-
Cl-19(Abnormal operation)	-	2000	-
Cl-20(Stability and mechanical hazards)	-	500	-
Cl-21(Mechanical strength)	-	1000	-
Cl-22(Construction)	-	500	-
Cl-23(Internal wiring)	-	1000	-
Cl-24(Components)	-	500	-
Cl-25(Supply connection and external flexible cords)	-	2000	-
Cl-26(Terminals for external conductors)	-	500	-
Cl-27(Provision for earthing)	-	1000	-
Cl-28(Screws and connections)	-	500	-
Cl-29(Clearances, creepage distances and solid insulation)	-	500	-
Cl-30(Resistance to heat and fire)	-	2000	-
Cl-31(Resistance to rusting)	-	1000	-
Cl-32(Radiation, toxicity and similar hazards)	-	0	-
Cl-4(General requirement)	-	0	-
Cl-7(Marking and instructions)	-	0	-
Cl-8(Protection against access to live parts)	-	0	-
Cl-10(Power input and current)	-	0	-
Cl-11(Heating)	-	0	-
Cl-12(Charging of metal-ion batteries)	-	0	-
Cl-13(Leakage current and electric strength at operating temperature)	-	0	-
Cl-14(Transient overvoltages)	-	0	-
Cl-15(Moisture resistance)	-	0	-
Cl-16(Leakage current and electric strength)	-	0	-
Cl-17(Overload protection of transformers and associated circuits)	-	0	-
Cl-18(Endurance)	-	0	-
Cl-19(Abnormal operation)	-	0	-
Cl-20(Stability and mechanical hazards)	-	0	-
Cl-21(Mechanical strength)	-	0	-
Cl-22(Construction)	-	0	-
Cl-23(Internal wiring)	-	0	-
Cl-24(Components)	-	0	-
Cl-25(Supply connection and external flexible cords)	-	0	-
Cl-26(Terminals for external conductors)	-	0	-
Cl-27(Provision for earthing)	-	0	-
Cl-28(Screws and connections)	-	0	-
Cl-29(Clearances, creepage distances and solid insulation)	-	0	-
Cl-30(Resistance to heat and fire)	-	0	-
Cl-31(Resistance to rusting)	-	0	-
Cl-32(Radiation, toxicity and similar hazards)	-	0	-
Cl-4(General requirement)	-	0	-
Cl-7(Marking and instructions)	-	0	-
Cl-8(Protection against access to live parts)	-	0	-
Cl-10(Power input and current)	-	0	-
Cl-11(Heating)	-	0	-
Cl-12(Charging of metal-ion batteries)	-	0	-
Cl-13(Leakage current and electric strength at operating temperature)	-	0	-
Cl-14(Transient overvoltages)	-	0	-
Cl-15(Moisture resistance)	-	0	-
Cl-16(Leakage current and electric strength)	-	0	-
Cl-17(Overload protection of transformers and associated circuits)	-	0	-
Cl-18(Endurance)	-	0	-
Cl-19(Abnormal operation)	-	0	-
Cl-20(Stability and mechanical hazards)	-	0	-
Cl-21(Mechanical strength)	-	0	-
Cl-22(Construction)	-	0	-
Cl-23(Internal wiring)	-	0	-
Cl-24(Components)	-	0	-
Cl-25(Supply connection and external flexible cords)	-	0	-
Cl-26(Terminals for external conductors)	-	0	-
Cl-27(Provision for earthing)	-	0	-
Cl-28(Screws and connections)	-	0	-
Cl-29(Clearances, creepage distances and solid insulation)	-	0	-
Cl-30(Resistance to heat and fire)	-	0	-
Cl-31(Resistance to rusting)	-	0	-
Cl-32(Radiation, toxicity and similar hazards)	-	0	-
Cl-4(General requirement)	-	0	-
Cl-7(Marking and instructions)	-	0	-
Cl-8(Protection against access to live parts)	-	0	-
Cl-10(Power input and current)	-	0	-
Cl-11(Heating)	-	0	-
Cl-12(Charging of metal-ion batteries)	-	0	-
Cl-13(Leakage current and electric strength at operating temperature)	-	0	-
Cl-14(Transient overvoltages)	-	0	-
Cl-15(Moisture resistance)	-	0	-
Cl-16(Leakage current and electric strength)	-	0	-
Cl-17(Overload protection of transformers and associated circuits)	-	0	-
Cl-18(Endurance)	-	0	-
Cl-19(Abnormal operation)	-	0	-
Cl-20(Stability and mechanical hazards)	-	0	-
Cl-21(Mechanical strength)	-	0	-
Cl-22(Construction)	-	0	-
Cl-23(Internal wiring)	-	0	-
Cl-24(Components)	-	0	-
Cl-25(Supply connection and external flexible cords)	-	0	-
Cl-26(Terminals for external conductors)	-	0	-
Cl-27(Provision for earthing)	-	0	-
Cl-28(Screws and connections)	-	0	-
Cl-29(Clearances, creepage distances and solid insulation)	-	0	-
Cl-30(Resistance to heat and fire)	-	0	-
Cl-31(Resistance to rusting)	-	0	-
Cl-32(Radiation, toxicity and similar hazards)	-	0	-
Cl-4(General requirement)	-	0	-
Cl-7(Marking and instructions)	-	0	-
Cl-8(Protection against access to live parts)	-	0	-
Cl-10(Power input and current)	-	0	-
Cl-11(Heating)	-	0	-
Cl-12(Charging of metal-ion batteries)	-	0	-
Cl-13(Leakage current and electric strength at operating temperature)	-	0	-
Cl-14(Transient overvoltages)	-	0	-
Cl-15(Moisture resistance)	-	0	-
Cl-16(Leakage current and electric strength)	-	0	-
Cl-17(Overload protection of transformers and associated circuits)	-	0	-
Cl-18(Endurance)	-	0	-
Cl-19(Abnormal operation)	-	0	-
Cl-20(Stability and mechanical hazards)	-	0	-
Cl-21(Mechanical strength)	-	0	-
Cl-22(Construction)	-	0	-
Cl-23(Internal wiring)	-	0	-
Cl-24(Components)	-	0	-
Cl-25(Supply connection and external flexible cords)	-	0	-
Cl-26(Terminals for external conductors)	-	0	-
Cl-27(Provision for earthing)	-	0	-
Cl-28(Screws and connections)	-	0	-
Cl-29(Clearances, creepage distances and solid insulation)	-	0	-
Cl-30(Resistance to heat and fire)	-	0	-
Cl-31(Resistance to rusting)	-	0	-
Cl-32(Radiation, toxicity and similar hazards)	-	0	-
Cl-4(General requirement)	-	0	-
Cl-7(Marking and instructions)	-	0	-
Cl-8(Protection against access to live parts)	-	0	-
Cl-10(Power input and current)	-	0	-
Cl-11(Heating)	-	0	-
Cl-12(Charging of metal-ion batteries)	-	0	-
Cl-13(Leakage current and electric strength at operating temperature)	-	0	-
Cl-14(Transient overvoltages)	-	0	-
Cl-15(Moisture resistance)	-	0	-
Cl-16(Leakage current and electric strength)	-	0	-
Cl-17(Overload protection of transformers and associated circuits)	-	0	-
Cl-18(Endurance)	-	0	-
Cl-19(Abnormal operation)	-	0	-
Cl-20(Stability and mechanical hazards)	-	0	-
Cl-21(Mechanical strength)	-	0	-
Cl-22(Construction)	-	0	-
Cl-23(Internal wiring)	-	0	-
Cl-24(Components)	-	0	-
Cl-25(Supply connection and external flexible cords)	-	0	-
Cl-26(Terminals for external conductors)	-	0	-
Cl-27(Provision for earthing)	-	0	-
Cl-28(Screws and connections)	-	0	-
Cl-29(Clearances, creepage distances and solid insulation)	-	0	-
Cl-30(Resistance to heat and fire)	-	0	-
Cl-31(Resistance to rusting)	-	0	-
Cl-32(Radiation, toxicity and similar hazards)	-	0	-

-
Included w.e.f.01.10.2025 Exclusion "Cl-32 (Radiation, toxicity and similar hazards) Cl-12 (Charging of metal-ion batteries) Cl-24 (Components)

3679

TUV SUD SOUTH ASIA PRIVATE LIMITED RANIPET

6191806

IS 6721 (2023)

SANDAL AND SLIPPERS SPECIFICATION First revision

39900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No.4(SHAPE AND DESIGN)	-	500	-
Cl. No.5("SIZE AND FITTINGS ")	-	500	-
Cl. No.6("CONSTRUCTION ")	-	500	-
Cl. No.7(MATERIAL)	-	500	-
Cl.8 Table-1 S.No 1, (i) (Amendment No-1)(Bond strength , N/mm, Min)	-	600	-
Cl.8 Table-1 S.No 1, (ii) (Amendment No-1)(Toe post attachment strength)	-	600	-
Cl.8 Table-1 S.No 1, (iii) (Amendment No-1)(Toe ring attachment strength)	-	600	-
Cl.8 Table-1 S.No 1, (iv) (Amendment No-1)(Strap to outsole strength N, Min)	-	600	-
Cl.8 Table-1 S.No 1, (v) (Amendment No-1)(Attachment strength of back strap and buckle/D-ring N, Min)	-	600	-
Cl.8 Table-1 S.No 1, (vi) (Amendment No-1)(Limit of useful extension, percent, Min)	-	1000	-
Cl.8 Table-1 S.No 1, (vii) (Amendment No-1)(Attachment strength of back strap and velcro, N, Mi)	-	600	-
Cl.8 Table-1 S.No 1, (viii) (Amendment No-1)(Hydrolysis resistance)	-	5200	-
Cl.8 Table-1 S.No 1, (ix) (Amendment No-1)(Heel pull off strength)	-	600	-
Cl.8 Table-1 S.No 1, (x) (Amendment No-1)(Inter layer bond strength)	-	600	-
Cl.8 Table-1 S.No 1, (xi) (Amendment No-1)(Slip resistance, coefficient of friction (COF)3)	-	2800	-
Cl.8 Table-1 S.No 1, (xii) (Amendment No-1)(Abrasion resistance, (volume loss) mm3 , Max)	-	960	-
Cl.8 Table-1 S.No 1, (xiii) (Amendment No-1)("Flexing resistance (Belt method or Bennewart flex method)")	-	1200	-
Cl.9 Table-2 S.No 1, (i) a (Amendment No-1)(Tear strength for other than moulded upper material)	-	440	-
Cl.9 Table-2 S.No 1, (ii) (Amendment No-1)(Flexing endurance)	-	1200	-
Cl.9 Table-3 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	440	-
Cl.9 Table-3 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	800	-
Cl.9 Table-4 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	440	-
Cl.9 Table-4 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	800	-
Cl.9 Table-5 S.No 1, (i) (Amendment No-1)(Grain crack index)	-	400	-
Cl.9 Table-5 S.No 1, (ii) (Amendment No-1)(Density, g/cm3 , Min)	-	400	-
Cl.9 Table-5 S.No 1, (iii) (Amendment No-1)(Abrasion resistance, mm/kcs)	-	960	-
Cl.9 Table-6 S.No 1, (i) (Amendment No-1)("Density, g/cm3 , Min (a)-Cellular, (b) Solid ")	-	400	-
Cl. No.8.6.1,Table 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	5600	-
Cl. No.8.6.1,Table 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	2400	-
Cl. No.8.6.1,Table 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	2400	-
Cl. No.8.6.1,Table 1 of IS 17011(iv)(Chromium (VI))	-	1200	-
Cl. No.8.6.1,Table 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	2800	-
Cl. No.8.6.1,Table 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	960	-
Cl. No.8.6.1,Table 1 of IS 17011(vii)(Formaldehyde)	-	960	-
Cl. No.8.6.1,Table 1 of IS 17011(viii)(Organotin compounds)	-	4000	-
Cl. No.8.6.1,Table 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	2800	-
Cl. No.8.6.1,Table 1 of IS 17011(x)(pH)	-	400	-
Cl. No.8.6.1,Table 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	4000	-
Cl. No.8.6.1,Table 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	1600	-
Cl. No.8.6.2(Lead content)	-	1200	-
Cl-5 ((Amendment No-1)(Category And Type)	-	500	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	2450	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	2450	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	2450	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	2450	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	2450	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	2450	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	2450	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	4000	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	4000	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	4000	-
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	4000	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	4000	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	4000	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	4000	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	4000	-
Cl.4.1 (Table B-1 Sl I)(Aromatic Amines: 4-aminobiphenyl)	-	2400	-
Cl.4.1 (Table B-1 Sl II)(Aromatic Amines: Benzidine)	-	2400	-
Cl.4.1 (Table B-1 Sl III)(Aromatic Amines: 4-chloro-o-toluidine)	-	2400	-
Cl.4.1 (Table B-1 Sl IV)(Aromatic Amines: 2-naphthylamine)	-	2400	-
Cl.4.1 (Table B-1 Sl V)(Aromatic Amines :o-aminoazotoluene)	-	2400	-
Cl.4.1 (Table B-1 Sl VI)(Aromatic Amines: 2-amino-4-nitrotoluenem)	-	2400	-
Cl.4.1 (Table B-1 Sl VII)(Aromatic Amines: p-chloroaniline)	-	2400	-
Cl.4.1 (Table B-1 Sl VIII)(Aromatic Amines: 2,4-diaminoanisole)	-	2400	-
Cl.4.1 (Table B-1 Sl IX)(Aromatic Amines : 4,4’- diaminodiphenylmethane:)	-	2400	-
Cl.4.1 (Table B-1 Sl X)(Aromatic Amines : 3,3’-dichlorobenzidine)	-	2400	-
Cl.4.1 (Table B-1 Sl XI)(Aromatic Amines : 3,3’-dimethoxybenzidine)	-	2400	-
Cl.4.1 (Table B-1 Sl XIII)(Aromatic Amines: 3,3’-dimethyl-4,4’-diaminodiphenylmethane)	-	2400	-
Cl.4.1 (Table B-1 Sl XIV)(Aromatic Amines : p-cresi)	-	2400	-
Cl.4.1 (Table B-1 Sl XV)(Aromatic Amines : 4,4’-methylene-bis(2-chloroaniline):)	-	2400	-
Cl.4.1 (Table B-1 Sl XVI)(Aromatic Amines :4,4’-oxydianiline)	-	2400	-
Cl.4.1 (Table B-1 Sl XVII)(Aromatic Amines:4,4’-thiodianiline)	-	2400	-
Cl.4.1 (Table B-1 Sl XVIII)(Aromatic Amines :o-toluidine:)	-	2400	-
Cl.4.1 (Table B-1 Sl XIX)(Aromatic Amines: 2,4-toluylendiamine)	-	2400	-
Cl.4.1 (Table B-1 Sl XX)(Aromatic Amines: 2,4,5-trimethylaniline)	-	2400	-
Cl.4.1 (Table B-1 Sl XXI)(Aromatic Amines :2,4-dimethylaniline)	-	2400	-
Cl.4.1 (Table B-1 Sl XXIII)(Aromatic Amines :2-methoxyaniline)	-	2400	-
Cl.4.1 (Table B-1 Sl XXIV)(Aromatic Amines :4-aminoazobenzene)	-	2400	-
Cl.4.1 (Table B-3 Sl I)(Allergenic Disperse Dyes :Disperse blue 3)	-	2800	-
Cl.4.1 (Table B-3 Sl II)(Allergenic Disperse Dyes :Disperse blue 7)	-	2800	-
Cl.4.1 (Table B-3 Sl III)(Allergenic Disperse Dyes :Disperse blue 26)	-	2800	-
Cl.4.1 (Table B-3 Sl IV)(Allergenic Disperse Dyes :Disperse blue 102)	-	2800	-
Cl.4.1 (Table B-3 Sl V)(Allergenic Disperse Dyes: Disperse brown 1)	-	2800	-
Cl.4.1 (Table B-3 Sl VI)(Allergenic Disperse Dyes :Disperse yellow 1)	-	2800	-
Cl.4.1 (Table B-3 Sl VII)(Allergenic Disperse Dyes :Disperse yellow 9)	-	2800	-
Cl.4.1 (Table B-3 Sl VIII)(Allergenic Disperse Dyes :Disperse yellow 39)	-	2800	-
Cl.4.1 (Table B-3 Sl IX)(Allergenic Disperse Dyes :Disperse yellow 49)	-	2800	-
Cl.4.1 (Table B-3 Sl X)(Allergenic Disperse Dyes :Disperse orange 1)	-	2800	-
Cl.4.1 (Table B-3 Sl XI)(Allergenic Disperse Dyes :Disperse red 11)	-	2800	-
Cl.4.1 (Table B-3 Sl XII)(Allergenic Disperse Dyes :Disperse red 17)	-	2800	-
Cl.4.1 (Table B-3 Sl XIII)(Allergenic Disperse Dyes :Disperse yellow 7)	-	2800	-
Cl.4.1 (Table B-3 Sl XIV)(Allergenic Disperse Dyes :Disperse yellow 56)	-	2800	-
Cl.4.1 (Table B-3 Sl XV)(Allergenic Disperse Dyes :Disperse red 151)	-	2800	-
Cl.4.1 (Table B-3 Sl XVI)(Allergenic Disperse Dyes :Solvent red 23)	-	2800	-
Cl.4.1 (Table B-4 Sl I)(Carcinogenic Disperse Dyes :Navy blue)	-	2800	-
Cl.4.1 (Table B-4 Sl II)(Carcinogenic Disperse Dyes: Disperse blue 1)	-	2800	-
Cl.4.1 (Table B-4 Sl III)(Carcinogenic Disperse Dyes: Disperse blue 35)	-	2800	-
Cl.4.1 (Table B-4 Sl IV)(Carcinogenic Disperse Dyes :Disperse blue 106)	-	2800	-
Cl.4.1 (Table B-4 Sl V)(Carcinogenic Disperse Dyes: Disperse blue 124)	-	2800	-
Cl.4.1 (Table B-4 Sl VI)(Carcinogenic Disperse Dyes :Disperse yellow 3)	-	2800	-
Cl.4.1 (Table B-4 Sl VII)(Carcinogenic Disperse Dyes: Disperse orange 3)	-	2800	-
Cl.4.1 (Table B-4 Sl VIII)(Carcinogenic Disperse Dyes :Disperse orange 37/59/76a))	-	2800	-
Cl.4.1 (Table B-4 Sl IX)(Carcinogenic Disperse Dyes :Disperse red 1)	-	2800	-
Cl.4.1 (Table B-4 Sl X)(Carcinogenic Disperse Dyes :Basic red 9)	-	2800	-
Cl.4.1 (Table B-4 Sl XI)(Carcinogenic Disperse Dyes :Violet 3)	-	2800	-
Cl.4.1 (Table B-4 Sl XII)(Carcinogenic Disperse Dyes Disperse yellow 23)	-	2800	-
Cl.4.1 (Table B-1 Sl XXII)(Aromatic Amines: 2,6-dimethylaniline:)	-	2400	-
Cl.4.1 (Table B-3)(Allergenic and Carcinogenic Disperse Dyes)	-	5600	-
Cl.4.1 (Table B-11)(PCP-TeCP-TriCP polychlorophenols)	-	2800	-
Cl.8 Table-1 S.No 1, (xiv) (Amendment No-1)(Chemical Requirements)	-	29000	-
Cl.8 - Table No 1 - Sl. No.-xiv(pH- IS 1390:2022)	-	400	-
Cl.8 - Table No 1 - Sl. No.-xv("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	1200	-
Cl.8 - Table No 1 - Sl. No.-xiv(pH- IS 1390:2022)	-	400	-
Cl.8 - Table No 1 - Sl. No.-xv("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	1200	-
Cl.4.1 (Table B-1 Sl XII)(Aromatic Amines : 3,3’-dimethylbenzidine)	-	2400	-
Cl-10 (Amendment No-1)(Marking)	-	500	-
Cl.9 Table-2 S.No 1, (i) b (Amendment No-1)(Tear strength For all moulded upper material)	-	440	-
Cl. No.8.("Requirement of Complete Sandal and Slipper (Chemical Requirements) ")	-	29000	-
Cl.8 Table-1 S.No 1, (xv) (Amendment No-1)(Lead content (as Pb)7 ppm)	-	1200	-

02 Dec, 2028

-
-

3680

Central institute of Petrochemicals Engineering & Technology (CIPET), Raipur

5163604

IS 8008 (2022)

Injection Moulded/Machined Polyethylene Fittings for Water Supply ï¿½ Specification ( Second Revision )

20 MM TO 315 MM

22869.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Material)	-	700.00	For BIS test 22869/- and For Other 29825/- GST Extra
4.2(Material)	-	3300.00	MFI test 1100/- GST Extra
4.1(Material)	-	1400.00	Volatile content test 700/- & Water content test 700/- & GST Extra
4.2(Material)	-	2200.00	OIT test 2200/-& GST Extra
4.3(Rework Material)	-	2200.00	Overt all migration test 1700/- Specimen charge 500/- & GST Extra
5(COLOUR)	-	500.00	GST Extra
6.1(The nominal outside diameter)	-	500.00	GST Extra
6.2(Bends, tees, pipe ends and end caps designation)	-	500.00	GST Extra
7(WELD LENGTH)	-	500.00	GST Extra
8(VISUAL APPEARANCE)	-	500.00	GST Extra
9.1(DIMENSIONS OF FITTINGS)	-	500.00	GST Extra
9.2(DIMENSIONS OF FITTINGS)	-	0.00	-
9.3(DIMENSIONS OF FITTINGS)	-	500.00	GST Extra
10.1.1(Length of Pipe for Welding Test)	-	0.00	-
10.1.2(Sandwich Flange Hydraulic Testing)	-	0.00	-
10.2(Carbon Black Content and Dispersion)	-	1625.00	CBC test 925/- & CBD 700/-
10.3(Melt Flow Rate)	-	1100.00	GST Extra
10.4(Density)	-	700.00	GST Extra
10.5(Oxidation Induction Time)	-	2200.00	GST Extra
10.6(Overall Migration)	-	2200.00	specimen charge 500/- GST Extra
11.1(Type Tests)	-	5300.00	For 1656 hr .@ 80 o C ,Specimen charge 500/-
11.2(Acceptance Tests)	-	6100.00	For 100 hr @ 27 oC test 4000/- & 48 hr @ 80 oC test 1600/- specimen charge 500/- GST Extra

25 Apr, 2028

-
Included w.e.f.31.07.2025

3681

Sleen India Biz venture Private Limited, Agra

9139736

IS 10203 (1982)

Technical supply conditions for thin - Walled plain bearings

13500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Materials)	-	2500	-
4(Dimensions and Tolerances )	-	1000	-
5(Workmanship)	-	1500	-
6(Surface Finish )	-	3000	-
7(Chemical Composition )	-	2500	-
9(Packing )	-	3000	-
10(Marking)	-	500	-

-
Included w.e.f 01.08.2025

3682

Atckon Laboratories LLP, Bahadurgarh

8186436

IS 915 (2012)

Laboratory glassware - One - Mark volumetric flasks (Third Revision)

ALL

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1(Material)	-	500	-
Table 1(Nominal Capacity)	-	0	-
Table 1(Internal Neck Diameter)	-	500	-
Table 1(Distance of graduation line)	-	500	-
Table 1(Overall Height)	-	500	-
Table 1(Bulb Diameter)	-	500	-
Table 1(Base Diameter)	-	500	-
Table 1(Wall Thickness)	-	500	-
Table 1(Ground joint k4)	-	500	-
Table 1(Ground joint k6)	-	500	-
8.3(Shape)	-	500	-
8.4(Neck)	-	500	-
8.5(Stopper)	-	500	-
8.6(Dimensions)	-	500	-
9.0(Graduation Line)	-	500	-
Table-2(Nominal capacity)	-	500	-
Table-2(Internal neck diameter)	-	500	-
Table-2(Distance of graduation line 1))	-	500	-
Table-2(Overall height 2))	-	500	-
Table-2(Bulb diameter)	-	500	-
Table-2(Base diameter)	-	500	-
Table-2(Wall thickness)	-	500	-
Table-2(Ground joint 3) k4)	-	500	-
Table-2(Ground joint 3) k6)	-	500	-
12.1(Visibility of graduation line, figures and marking)	-	500	-
12.2(Visibility of graduation line, figures and marking)	-	500	-
Clause. 7.0(Accuracy)	-	500	-

19 Jun, 2028

-
Included w.e.f 18.08.2025

3683

TUV SUD SOUTH ASIA PRIVATE LIMITED RANIPET

6191806

IS 15844 : Part 2 (2023)

SPORTS FOOTWEAR PART -2 PERFORMANCE SPORTS FOOTWEAR

79900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(SAMPLING AND CONDITIONING)	-	500	-
5(DESIGN)	-	500	-
6(SIZE AND FITTINGS)	-	500	-
7.1.1(Whole Footwear)	-	79900	-
7.1.2(Upper to Mid Sole/Out Sole Bond Performance)	-	600	-
7.1.3("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	600	-
7.1.4(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	600	-
7.1.5(Energy Absorption at Seat Region)	-	800	-
7.1.6(Complete Shoe Flexing)	-	1600	-
7.1.7(Washability)	-	2000	-
7.1.8(Slip Resistance)	-	2800	-
7.1.9(Heel Drop)	-	600	-
7.2 , Table No. 2 , i)(Flexing resistance)	-	1000	-
7.2 , Table No. 2 , ii)(Tear strength (average force))	-	440	-
7.2 , Table No. 2 , iii)("Colour fastness rubbing (To and fro) Grey scale rate Dry: (rubbing) Rating: (Marring and staining) ")	-	480	-
7.2 , Table No. 2 , iv) ,a)(Water vapour permeability)	-	1000	-
7.2 , Table No. 2 , iv) ,b)(Water vapour coefficient)	-	1800	-
7.2 , Table No. 2 , v)(Stitch tear strength (double hole))	-	440	-
7.2 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Rating: (Marring)")	-	800	-
7.2 , Table No. 2 , vii)(Tensile strength)	-	440	-
7.2 , Table No. 2 , viii)(Elongation at break,)	-	440	-
7.2 , Table No. 2 , ix)("Water penetration and water absorption after 60 Minutes Water absorption %, Max Water penetration Gms, Max")	-	800	-
7.2 , Table No. 2 , x)(Abrasion test (for unlined upper))	-	800	-
7.2 , Table No. 3 , i)(Breaking strength "As per Method 1 of IS 7016 (Part 2)/ ISO 1421 : 2016 or ISO 17706")	-	440	-
7.2 , Table No. 3 , ii)(Elongation at break)	-	440	-
7.2 , Table No. 3 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	440	-
7.2 , Table No. 3 , iv)(Strength at needle perforation)	-	440	-
7.2 , Table No. 3 , v)("Flexing resistance, no crack/damage to coating/ lamination / upper material till prescribed cycles")	-	1000	-
7.2 , Table No. 3 , vi) , a)(Water vapour permeability,)	-	1000	-
7.2 , Table No. 3 , vi) , b)("Water vapour coefficient, ")	-	1800	-
7.2 , Table No. 3 , vii)(Hydrolysis resistance)	-	4000	-
7.2 , Table No. 3 , viii)(Colour fastness to light grey scale rate)	-	800	-
7.2 , Table No. 3 , ix)(Bursting Strength,)	-	400	-
7.3 , Table No. 4 , i)(Tear strength,)	-	440	-
7.3 , Table No. 4 , ii)(Abrasion resistance, cycles)	-	800	-
7.3 , Table No. 4 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, ")	-	480	-
7.3 , Table No. 4 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, ")	-	480	-
7.3 , Table No. 4 , v) , a)(Water vapour permeability,)	-	1000	-
7.3 , Table No. 4 , v) , b)("Water vapour coefficient, " As per IS 15298 (Part 1))	-	1800	-
7.4 , Table No. 5 , ii)(Flexing index)	-	400	-
7.4 , Table No. 5 , iii)(Abrasion resistance, at 400 cycles)	-	800	-
7.4 , Table No. 5 , iv) , a)(Water Absorption,)	-	800	-
7.4 , Table No. 5 , iv) , b)(Water Desorption)	-	800	-
7.5 , Table No. 6 , i)(Thickness)	-	400	-
7.5 , Table No. 6 , ii)(Abrasion resistance, cycles As per IS 15298 (Part 1))	-	800	-
7.5 , Table No. 6 , iii) , a)(Water Absorption)	-	800	-
7.5 , Table No. 6 , iii) , b)(Water Desorption)	-	800	-
7.5 , Table No. 6 , iv)(Heat resistance shrinkage linear)	-	800	-
7.6 , Table No. 7 , i)(Abrasion resistance (volume loss))	-	960	-
7.6 , Table No. 7 , ii)(Flexing resistance)	-	1200	-
7.6 , Table No. 7 , iii)(Hydrolysis resistance, cut growth after 1 50 000 flexes)	-	5200	-
7.6 , Table No. 7 , iv)(Tear strength)	-	480	-
7.6 , Table No. 7 , v)(Tensile strength)	-	480	-
7.6 , Table No. 7 , vi)(Elongation at break)	-	480	-
7.6 , Table No. 7 , vii)(Compression set)	-	800	-
7.7 , Table No. 8 , i)(Compression set)	-	800	-
7.7 , Table No. 8 , ii)(Split tear strength,)	-	440	-
7.7 , Table No. 8 , iii)(Heat shrinkage,)	-	800	-
7.7 , Table No. 8 , iv)(Elongation at break,)	-	440	-
7.8 , Table No. 9 , i)(First dry collapsing load, hardness)	-	1000	-
7.8 , Table No. 9 , ii)(Resilience)	-	1000	-
7.8 , Table No. 9 , iii)(Moisture resistance)	-	1000	-
7.8 , Table No. 9 , iv) , a)(Initial dry area shape retention)	-	1000	-
7.8 , Table No. 9 , iv) , b)(Area shape retention after 10th collapse, dry)	-	1000	-
7.8 , Table No. 9 , v)(Peel strength)	-	1000	-
7.9 , Table No. 10 , i)(Peel strength)	-	1000	-
7.9 , Table No. 10 , ii)(Shear strength)	-	600	-
7.10 , Table No. 11 , i)(Limit of useful extension,)	-	1000	-
7.10 , Table No. 11 , ii)(Needle strength,)	-	440	-
7.11 , Table No. 12 , i)(Breaking strength of lace,)	-	600	-
7.11 , Table No. 12 , ii)(Lace tag strength,)	-	600	-
7.11 , Table No. 12 , iii)(Lace to lace abrasion,)	-	1200	-
7.11 , Table No. 12 , iv)("Colour fastness to water Gray Scale Rate")	-	480	-
7.11 , Table No. 12 , v)(Strength of Buckle/Ski hook)	-	600	-
7.11 , Table No. 12 , vi)(Corrosion resistance)	-	800	-
7.12, Table no. 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	5600	-
7.12, Table no. 1 of IS 17011,(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	2400	-
7.12, Table no. 1 of IS 17011,(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	2400	-
7.12, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	1050	-
7.12, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	2800	-
7.12, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	960	-
7.12, Table no. 1 of IS 17011,(vii)(Formaldehyde)	-	960	-
7.12, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	4000	-
7.12, Table no. 1 of IS 17011,(ix)(PCP-TeCP-TriCP polychlorophenols)	-	2800	-
7.12, Table no. 1 of IS 17011,(x)(pH)	-	400	-
7.12, Table no. 1 of IS 17011,(xi)(Phthalates (each individual phthalate))	-	4000	-
7.12, Table no. 1 of IS 17011,(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	1600	-
7.12.2 (Amendment 1)(Lead content)	-	1200	-
7.4 , Table No. 5 , i)(Thickness)	-	400	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	2800	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	2800	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	2800	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	2800	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	2800	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	2800	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	2800	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	4000	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	4000	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	4000	-
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	4000	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	4000	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	4000	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	4000	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	4000	-
Cl.4.1 (Table B-1 Sl I)(Aromatic Amines: 4-aminobiphenyl)	-	2400	-
Cl.4.1 (Table B-1 Sl II)(Aromatic Amines: Benzidine)	-	2400	-
Cl.4.1 (Table B-1 Sl III)(Aromatic Amines: 4-chloro-o-toluidine)	-	2400	-
Cl.4.1 (Table B-1 Sl IV)(Aromatic Amines: 2-naphthylamine)	-	2400	-
Cl.4.1 (Table B-1 Sl V)(Aromatic Amines :o-aminoazotoluene)	-	2400	-
Cl.4.1 (Table B-1 Sl VI)(Aromatic Amines: 2-amino-4-nitrotoluenem)	-	2400	-
Cl.4.1 (Table B-1 Sl VII)(Aromatic Amines: p-chloroaniline)	-	2400	-
Cl.4.1 (Table B-1 Sl VIII)(Aromatic Amines: 2,4-diaminoanisole)	-	2400	-
Cl.4.1 (Table B-1 Sl IX)(Aromatic Amines : 4,4’- diaminodiphenylmethane:)	-	2400	-
Cl.4.1 (Table B-1 Sl X)(Aromatic Amines : 3,3’-dichlorobenzidine)	-	2400	-
Cl.4.1 (Table B-1 Sl XI)(Aromatic Amines : 3,3’-dimethoxybenzidine)	-	2400	-
Cl.4.1 (Table B-1 Sl XII)(Aromatic Amines : 3,3’-dimethylbenzidine)	-	2400	-
Cl.4.1 (Table B-1 Sl XIII)(Aromatic Amines: 3,3’-dimethyl-4,4’-diaminodiphenylmethane)	-	2400	-
Cl.4.1 (Table B-1 Sl XIV)(Aromatic Amines : p-cresi)	-	2400	-
Cl.4.1 (Table B-1 Sl XV)(Aromatic Amines : 4,4’-methylene-bis(2-chloroaniline):)	-	2400	-
Cl.4.1 (Table B-1 Sl XVI)(Aromatic Amines :4,4’-oxydianiline)	-	2400	-
Cl.4.1 (Table B-1 Sl XVII)(Aromatic Amines:4,4’-thiodianiline)	-	2400	-
Cl.4.1 (Table B-1 Sl XVIII)(Aromatic Amines :o-toluidine:)	-	2400	-
Cl.4.1 (Table B-1 Sl XIX)(Aromatic Amines: 2,4-toluylendiamine)	-	2400	-
Cl.4.1 (Table B-1 Sl XX)(Aromatic Amines: 2,4,5-trimethylaniline)	-	2400	-
Cl.4.1 (Table B-1 Sl XXI)(Aromatic Amines :2,4-dimethylaniline)	-	2400	-
Cl.4.1 (Table B-1 Sl XXII)(Aromatic Amines: 2,6-dimethylaniline:)	-	2400	-
Cl.4.1 (Table B-1 Sl XXIII)(Aromatic Amines :2-methoxyaniline)	-	2400	-
Cl.4.1 (Table B-1 Sl XXIV)(Aromatic Amines :4-aminoazobenzene)	-	2400	-
Cl.4.1 (Table B-3 Sl I)(Allergenic Disperse Dyes :Disperse blue 3)	-	2800	-
Cl.4.1 (Table B-3 Sl II)(Allergenic Disperse Dyes :Disperse blue 7)	-	2800	-
Cl.4.1 (Table B-3 Sl III)(Allergenic Disperse Dyes :Disperse blue 26)	-	2800	-
Cl.4.1 (Table B-3 Sl IV)(Allergenic Disperse Dyes :Disperse blue 102)	-	2800	-
Cl.4.1 (Table B-3 Sl V)(Allergenic Disperse Dyes: Disperse brown 1)	-	2800	-
Cl.4.1 (Table B-3 Sl VI)(Allergenic Disperse Dyes :Disperse yellow 1)	-	2800	-
Cl.4.1 (Table B-3 Sl VII)(Allergenic Disperse Dyes :Disperse yellow 9)	-	2800	-
Cl.4.1 (Table B-3 Sl VIII)(Allergenic Disperse Dyes :Disperse yellow 39)	-	2800	-
Cl.4.1 (Table B-3 Sl IX)(Allergenic Disperse Dyes :Disperse yellow 49)	-	2800	-
Cl.4.1 (Table B-3 Sl X)(Allergenic Disperse Dyes :Disperse orange 1)	-	2800	-
Cl.4.1 (Table B-3 Sl XI)(Allergenic Disperse Dyes :Disperse red 11)	-	2800	-
Cl.4.1 (Table B-3 Sl XII)(Allergenic Disperse Dyes :Disperse red 17)	-	2800	-
Cl.4.1 (Table B-3 Sl XIII)(Allergenic Disperse Dyes :Disperse yellow 7)	-	2800	-
Cl.4.1 (Table B-3 Sl XIV)(Allergenic Disperse Dyes :Disperse yellow 56)	-	2800	-
Cl.4.1 (Table B-3 Sl XV)(Allergenic Disperse Dyes :Disperse red 151)	-	2800	-
Cl.4.1 (Table B-3 Sl XVI)(Allergenic Disperse Dyes :Solvent red 23)	-	2800	-
Cl.4.1 (Table B-4 Sl I)(Carcinogenic Disperse Dyes :Navy blue)	-	2800	-
Cl.4.1 (Table B-4 Sl II)(Carcinogenic Disperse Dyes: Disperse blue 1)	-	2800	-
Cl.4.1 (Table B-4 Sl III)(Carcinogenic Disperse Dyes: Disperse blue 35)	-	2800	-
Cl.4.1 (Table B-4 Sl IV)(Carcinogenic Disperse Dyes :Disperse blue 106)	-	2800	-
Cl.4.1 (Table B-4 Sl V)(Carcinogenic Disperse Dyes: Disperse blue 124)	-	2800	-
Cl.4.1 (Table B-4 Sl VI)(Carcinogenic Disperse Dyes :Disperse yellow 3)	-	2800	-
Cl.4.1 (Table B-4 Sl VII)(Carcinogenic Disperse Dyes: Disperse orange 3)	-	2800	-
Cl.4.1 (Table B-4 Sl VIII)(Carcinogenic Disperse Dyes :Disperse orange 37/59/76a))	-	2800	-
Cl.4.1 (Table B-4 Sl IX)(Carcinogenic Disperse Dyes :Disperse red 1)	-	2800	-
Cl.4.1 (Table B-4 Sl X)(Carcinogenic Disperse Dyes :Basic red 9)	-	2800	-
Cl.4.1 (Table B-4 Sl XI)(Carcinogenic Disperse Dyes :Violet 3)	-	2800	-
Cl.4.1 (Table B-4 Sl XII)(Carcinogenic Disperse Dyes Disperse yellow 23)	-	2800	-
Cl.4.1 (Table B-3)(Allergenic and Carcinogenic Disperse Dyes)	-	5600	-
Cl.4.1 (Table B-11)(PCP-TeCP-TriCP polychlorophenols)	-	2800	-
7.12("Chemical Requirement on Complete Product for All Types of Sports Shoe")	-	40000	-
8(MARKING AND PACKING)	-	500	-

02 Dec, 2028

-
-

3684

Aaditech Test and Calibration Lab LLP

8179926

IS 14772 (2020)

Boxes and Enclosures for Electrical Accessories for Household and Similar Fixed Electrical Installations — General Requirements ( First Revision )

Electrical accessories with a rated voltage not exceeding 440 V a.c. intended for household or similar fixed electrical installations, either indoors or outdoors.

26000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Nature of material)	-	500	-
7.2(Type of installation)	-	500	-
7.3(Types of inlets)	-	500	-
7.4(Clamping means)	-	500	-
7.5(Minimum temperature during installation)	-	500	-
7.6, 7.7, 7.8(The degree of ingress protection)	-	1000	-
7.9(The provision for fixing accessories to the boxes )	-	500	-
7.1(The method of fixing the terminals)	-	500	-
8.1(marking)	-	500	-
8.2(By Inspection and The marking is rubbed by hand 15s width a piece of cloth soaked with water and again for 15s with a piece of cloth soaked with petroleum spirit.)	-	500	-
8.3(BIS Certification Marking)	-	500	-
9.0(Dimensions)	-	500	-
10.0(Protection against electric shock)	-	500	-
11.0(PROVISION FOR EARTHING)	-	500	-
12.0(Constructions)	-	2000	-
13.0(Resistance to ingress of solid objects)	-	2000	-
13.0(Resistance toharmful ingress of water)	-	2000	-
13.0(Resistance to ageing)	-	2000	-
14.0(insultation resistance)	-	500	-
14.0(electric strength)	-	500	-
15.0(Mechanical strength)	-	1000	-
16.0(resistance to heat)	-	1000	-
17.0(creepage distance)	-	500	-
17.0(clearances)	-	500	-
17.0(distance through seating compund)	-	500	-
18.0(Resistance to insulating material to abnormal heat and fire)	-	2000	-
19.0(Resistance to tracking)	-	1000	-
20.0(Resistance to corrosion)	-	2000	-
21.0(Electromagnetic compatibility (EMC))	-	0	-

-
Included w.e.f. 18.08.2025 Exclusion: 21.0 (Electromagnetic compatibility (EMC))

3685

Dashmesh Test Lab Private Limited

8186926

IS 4159 (2021)

Mineral Filled Sheathed Heating Elements

upto 5000W

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
"Cl. 6 IS 4159:2021"(Classification)	-	100	-
"Cl. 8 IS 4159:2021"(Protection against access to live parts)	-	1000	-
Cl.7.1 of IS 4159:2021(Marking)	-	1000	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.2 of IS 4159:2021(Marking)	-	0	-
Cl.7.3 of IS 4159:2021(Marking)	-	0	-
"Cl. 9 IS 4159:2021"(Starting of motor operated appliances)	-	0	-
"Cl. 10 IS 4159:2021"(Power Input and Current)	-	1000	-
"Cl. 11 IS 4159:2021"(Heating)	-	1000	-
"Cl. 13 IS 4159:2021"(Leakage Current & Electrical Strength at Operating Temperature)	-	1000	-
"Cl. 14 IS 4159:2021"(Transient Over Voltage)	-	1000	-
"Cl. 15 IS 4159:2021"(Moisture Resistance)	-	1000	-
"Cl. 16 IS 4159:2021"(Leakage Current and Electric strength)	-	1000	-
"Cl. 17 IS 4159:2021"(Overload protection of transformers and associated circuits.)	-	1000	-
"Cl. 18 IS 4159:2021"(Endurance)	-	1000	-
"Cl. 19 IS 4159:2021"(Abnormal Operation)	-	1000	-
"Cl. 20 IS 4159:2021"(Stability and mechanical Hazards)	-	500	-
"Cl. 21 IS 4159:2021"(Mechanical Strength)	-	500	-
"Cl. 22 IS 4159:2021"(Construction)	-	500	-
"Cl. 23 IS 4159:2021"(Internal Wiring)	-	500	-
"Cl. 24 IS 4159:2021"(Components)	-	500	-
"Cl. 25 IS 4159:2021"(Supply Connections and External Flexible Cables and Cords)	-	500	-
"Cl. 26 IS 4159:2021"(Terminal For External Conductors)	-	500	-
"Cl. 27 IS 4159:2021"(Provision For Earthing)	-	500	-
"Cl. 28 IS 4159:2021"(Screws and Connections)	-	500	-
"Cl. 29 IS 4159:2021"(Creepage Distances, Clearances And Distances Through Insulation)	-	500	-
"Cl. 30 IS 4159:2021"(Resistance To Heat, Fire And Tracking)	-	1000	-
"Cl. 31 IS 4159:2021"(Resistance To Rusting)	-	500	-
"Cl. 102 IS 4159:2021"(Leakage and hydrostatic strength (for oil heating elements))	-	1000	-
Cl.22.103 of IS 4159:2021(Construction)	-	0	-
Cl.22.104 of IS 4159:2021(Construction)	-	0	-
Cl.22.106 of IS 4159:2021(Construction)	-	0	-
Cl.22.107 of IS 4159:2021(Construction)	-	0	-
Cl.22.108 of IS 4159:2021(Construction)	-	0	-
Cl.22.109 of IS 4159:2021(Construction)	-	0	-
Cl.22.110 of IS 4159:2021(Construction)	-	0	-
Cl.22.111 of IS 4159:2021(Construction)	-	0	-
Cl.27 & IS 302-1: 2008(Provision for Earthing)	-	500	-
Cl.27 & IS 302-1: 2008(Provision for Earthing)	-	0	-
Cl.28.1 & IS 302-1: 2008(Screws & Connection)	-	0	-
Cl.28.4 IS 302-1: 2008(Screws & Connection)	-	500	-
Cl. 29.1 & IS 302-1: 2008(Creepage Distances & Clearances)	-	500	-
Cl. 29.2 & IS 302-1: 2009(Creepage Distances & Clearances)	-	0	-
Cl.19.2 of IS 302-1: 2008(Abnormal Operation)	-	1000	-
Cl.19.3 of IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.10 of IS 302-1:2008(Power Input & Current)	-	1000	-
Cl.11 of IS 4159:2021 & IS 302‐1:2008(Heating)	-	1000	-
Cl.11 of IS 4159:2021 & IS 302‐1:2008(Heating)	-	0	-
Cl.11.2 of IS 4159:2021(Heating)	-	0	-
Cl.11.101 of IS 4159:2021(Heating)	-	0	-
Cl.22.101 of IS 4159:2021(Construction)	-	0	-
Cl.22.102 of IS 4159:2021(Construction)	-	0	-
Cl.22.105 of IS 4159:2021(Construction)	-	0	-
Cl.18 of IS 4159:2021(Endurance Test)	-	1000	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.22.106(CONSTRUCTION)	-	0	-
"Cl. 6 IS 4159:2021"(Classification)	-	0	-
"Cl. 8 IS 4159:2021"(Protection against access to live parts)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.2 of IS 4159:2021(Marking)	-	0	-
Cl.7.3 of IS 4159:2021(Marking)	-	0	-
"Cl. 9 IS 4159:2021"(Starting of motor operated appliances)	-	0	-
"Cl. 10 IS 4159:2021"(Power Input and Current)	-	0	-
"Cl. 11 IS 4159:2021"(Heating)	-	0	-
"Cl. 13 IS 4159:2021"(Leakage Current & Electrical Strength at Operating Temperature)	-	0	-
"Cl. 14 IS 4159:2021"(Transient Over Voltage)	-	0	-
"Cl. 15 IS 4159:2021"(Moisture Resistance)	-	0	-
"Cl. 16 IS 4159:2021"(Leakage Current and Electric strength)	-	0	-
"Cl. 17 IS 4159:2021"(Overload protection of transformers and associated circuits.)	-	0	-
"Cl. 18 IS 4159:2021"(Endurance)	-	0	-
"Cl. 19 IS 4159:2021"(Abnormal Operation)	-	0	-
"Cl. 20 IS 4159:2021"(Stability and mechanical Hazards)	-	0	-
"Cl. 21 IS 4159:2021"(Mechanical Strength)	-	0	-
"Cl. 22 IS 4159:2021"(Construction)	-	0	-
"Cl. 23 IS 4159:2021"(Internal Wiring)	-	0	-
"Cl. 24 IS 4159:2021"(Components)	-	0	-
"Cl. 25 IS 4159:2021"(Supply Connections and External Flexible Cables and Cords)	-	0	-
"Cl. 26 IS 4159:2021"(Terminal For External Conductors)	-	0	-
"Cl. 27 IS 4159:2021"(Provision For Earthing)	-	0	-
"Cl. 28 IS 4159:2021"(Screws and Connections)	-	0	-
"Cl. 29 IS 4159:2021"(Creepage Distances, Clearances And Distances Through Insulation)	-	0	-
"Cl. 30 IS 4159:2021"(Resistance To Heat, Fire And Tracking)	-	0	-
"Cl. 31 IS 4159:2021"(Resistance To Rusting)	-	0	-
"Cl. 102 IS 4159:2021"(Leakage and hydrostatic strength (for oil heating elements))	-	0	-
Cl.22.103 of IS 4159:2021(Construction)	-	0	-
Cl.22.104 of IS 4159:2021(Construction)	-	0	-
Cl.22.106 of IS 4159:2021(Construction)	-	0	-
Cl.22.107 of IS 4159:2021(Construction)	-	0	-
Cl.22.108 of IS 4159:2021(Construction)	-	0	-
Cl.22.109 of IS 4159:2021(Construction)	-	0	-
Cl.22.110 of IS 4159:2021(Construction)	-	0	-
Cl.22.111 of IS 4159:2021(Construction)	-	0	-
Cl.27 & IS 302-1: 2008(Provision for Earthing)	-	0	-
Cl.27 & IS 302-1: 2008(Provision for Earthing)	-	0	-
Cl.28.1 & IS 302-1: 2008(Screws & Connection)	-	0	-
Cl.28.4 IS 302-1: 2008(Screws & Connection)	-	0	-
Cl. 29.1 & IS 302-1: 2008(Creepage Distances & Clearances)	-	0	-
Cl. 29.2 & IS 302-1: 2009(Creepage Distances & Clearances)	-	0	-
Cl.19.2 of IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19.3 of IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.10 of IS 302-1:2008(Power Input & Current)	-	0	-
Cl.11 of IS 4159:2021 & IS 302‐1:2008(Heating)	-	0	-
Cl.11 of IS 4159:2021 & IS 302‐1:2008(Heating)	-	0	-
Cl.11.2 of IS 4159:2021(Heating)	-	0	-
Cl.11.101 of IS 4159:2021(Heating)	-	0	-
Cl.22.101 of IS 4159:2021(Construction)	-	0	-
Cl.22.102 of IS 4159:2021(Construction)	-	0	-
Cl.22.105 of IS 4159:2021(Construction)	-	0	-
Cl.18 of IS 4159:2021(Endurance Test)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.22.106(CONSTRUCTION)	-	0	-
"Cl. 6 IS 4159:2021"(Classification)	-	0	-
"Cl. 8 IS 4159:2021"(Protection against access to live parts)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.2 of IS 4159:2021(Marking)	-	0	-
Cl.7.3 of IS 4159:2021(Marking)	-	0	-
"Cl. 9 IS 4159:2021"(Starting of motor operated appliances)	-	0	-
"Cl. 10 IS 4159:2021"(Power Input and Current)	-	0	-
"Cl. 11 IS 4159:2021"(Heating)	-	0	-
"Cl. 13 IS 4159:2021"(Leakage Current & Electrical Strength at Operating Temperature)	-	0	-
"Cl. 14 IS 4159:2021"(Transient Over Voltage)	-	0	-
"Cl. 15 IS 4159:2021"(Moisture Resistance)	-	0	-
"Cl. 16 IS 4159:2021"(Leakage Current and Electric strength)	-	0	-
"Cl. 17 IS 4159:2021"(Overload protection of transformers and associated circuits.)	-	0	-
"Cl. 18 IS 4159:2021"(Endurance)	-	0	-
"Cl. 19 IS 4159:2021"(Abnormal Operation)	-	0	-
"Cl. 20 IS 4159:2021"(Stability and mechanical Hazards)	-	0	-
"Cl. 21 IS 4159:2021"(Mechanical Strength)	-	0	-
"Cl. 22 IS 4159:2021"(Construction)	-	0	-
"Cl. 23 IS 4159:2021"(Internal Wiring)	-	0	-
"Cl. 24 IS 4159:2021"(Components)	-	0	-
"Cl. 25 IS 4159:2021"(Supply Connections and External Flexible Cables and Cords)	-	0	-
"Cl. 26 IS 4159:2021"(Terminal For External Conductors)	-	0	-
"Cl. 27 IS 4159:2021"(Provision For Earthing)	-	0	-
"Cl. 28 IS 4159:2021"(Screws and Connections)	-	0	-
"Cl. 29 IS 4159:2021"(Creepage Distances, Clearances And Distances Through Insulation)	-	0	-
"Cl. 30 IS 4159:2021"(Resistance To Heat, Fire And Tracking)	-	0	-
"Cl. 31 IS 4159:2021"(Resistance To Rusting)	-	0	-
Cl.22.103 of IS 4159:2021(Construction)	-	0	-
Cl.22.104 of IS 4159:2021(Construction)	-	0	-
Cl.22.106 of IS 4159:2021(Construction)	-	0	-
Cl.22.107 of IS 4159:2021(Construction)	-	0	-
Cl.22.108 of IS 4159:2021(Construction)	-	0	-
Cl.22.109 of IS 4159:2021(Construction)	-	0	-
Cl.22.110 of IS 4159:2021(Construction)	-	0	-
Cl.22.111 of IS 4159:2021(Construction)	-	0	-
Cl.27 & IS 302-1: 2008(Provision for Earthing)	-	0	-
Cl.27 & IS 302-1: 2008(Provision for Earthing)	-	0	-
Cl.28.1 & IS 302-1: 2008(Screws & Connection)	-	0	-
Cl.28.4 IS 302-1: 2008(Screws & Connection)	-	0	-
Cl. 29.1 & IS 302-1: 2008(Creepage Distances & Clearances)	-	0	-
Cl. 29.2 & IS 302-1: 2009(Creepage Distances & Clearances)	-	0	-
Cl.19.2 of IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19.3 of IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.10 of IS 302-1:2008(Power Input & Current)	-	0	-
Cl.11 of IS 4159:2021 & IS 302‐1:2008(Heating)	-	0	-
Cl.11 of IS 4159:2021 & IS 302‐1:2008(Heating)	-	0	-
Cl.11.2 of IS 4159:2021(Heating)	-	0	-
Cl.11.101 of IS 4159:2021(Heating)	-	0	-
Cl.22.101 of IS 4159:2021(Construction)	-	0	-
Cl.22.102 of IS 4159:2021(Construction)	-	0	-
Cl.22.105 of IS 4159:2021(Construction)	-	0	-
Cl.18 of IS 4159:2021(Endurance Test)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.22.106(CONSTRUCTION)	-	0	-
"Cl. 6 IS 4159:2021"(Classification)	-	0	-
"Cl. 8 IS 4159:2021"(Protection against access to live parts)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.2 of IS 4159:2021(Marking)	-	0	-
Cl.7.3 of IS 4159:2021(Marking)	-	0	-
"Cl. 9 IS 4159:2021"(Starting of motor operated appliances)	-	0	-
"Cl. 10 IS 4159:2021"(Power Input and Current)	-	0	-
"Cl. 11 IS 4159:2021"(Heating)	-	0	-
"Cl. 13 IS 4159:2021"(Leakage Current & Electrical Strength at Operating Temperature)	-	0	-
"Cl. 14 IS 4159:2021"(Transient Over Voltage)	-	0	-
"Cl. 15 IS 4159:2021"(Moisture Resistance)	-	0	-
"Cl. 16 IS 4159:2021"(Leakage Current and Electric strength)	-	0	-
"Cl. 17 IS 4159:2021"(Overload protection of transformers and associated circuits.)	-	0	-
"Cl. 18 IS 4159:2021"(Endurance)	-	0	-
"Cl. 19 IS 4159:2021"(Abnormal Operation)	-	0	-
"Cl. 20 IS 4159:2021"(Stability and mechanical Hazards)	-	0	-
"Cl. 21 IS 4159:2021"(Mechanical Strength)	-	0	-
"Cl. 22 IS 4159:2021"(Construction)	-	0	-
"Cl. 23 IS 4159:2021"(Internal Wiring)	-	0	-
"Cl. 24 IS 4159:2021"(Components)	-	0	-
"Cl. 25 IS 4159:2021"(Supply Connections and External Flexible Cables and Cords)	-	0	-
"Cl. 26 IS 4159:2021"(Terminal For External Conductors)	-	0	-
"Cl. 27 IS 4159:2021"(Provision For Earthing)	-	0	-
"Cl. 28 IS 4159:2021"(Screws and Connections)	-	0	-
"Cl. 29 IS 4159:2021"(Creepage Distances, Clearances And Distances Through Insulation)	-	0	-
"Cl. 30 IS 4159:2021"(Resistance To Heat, Fire And Tracking)	-	0	-
"Cl. 31 IS 4159:2021"(Resistance To Rusting)	-	0	-
Cl.22.103 of IS 4159:2021(Construction)	-	0	-
Cl.22.104 of IS 4159:2021(Construction)	-	0	-
Cl.22.106 of IS 4159:2021(Construction)	-	0	-
Cl.22.107 of IS 4159:2021(Construction)	-	0	-
Cl.22.108 of IS 4159:2021(Construction)	-	0	-
Cl.22.109 of IS 4159:2021(Construction)	-	0	-
Cl.22.110 of IS 4159:2021(Construction)	-	0	-
Cl.22.111 of IS 4159:2021(Construction)	-	0	-
Cl.27 & IS 302-1: 2008(Provision for Earthing)	-	0	-
Cl.27 & IS 302-1: 2008(Provision for Earthing)	-	0	-
Cl.28.1 & IS 302-1: 2008(Screws & Connection)	-	0	-
Cl.28.4 IS 302-1: 2008(Screws & Connection)	-	0	-
Cl. 29.1 & IS 302-1: 2008(Creepage Distances & Clearances)	-	0	-
Cl. 29.2 & IS 302-1: 2009(Creepage Distances & Clearances)	-	0	-
Cl.19.2 of IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19.3 of IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.10 of IS 302-1:2008(Power Input & Current)	-	0	-
Cl.11 of IS 4159:2021 & IS 302‐1:2008(Heating)	-	0	-
Cl.11 of IS 4159:2021 & IS 302‐1:2008(Heating)	-	0	-
Cl.11.2 of IS 4159:2021(Heating)	-	0	-
Cl.11.101 of IS 4159:2021(Heating)	-	0	-
Cl.22.101 of IS 4159:2021(Construction)	-	0	-
Cl.22.102 of IS 4159:2021(Construction)	-	0	-
Cl.22.105 of IS 4159:2021(Construction)	-	0	-
Cl.18 of IS 4159:2021(Endurance Test)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.22.106(CONSTRUCTION)	-	0	-
"Cl. 6 IS 4159:2021"(Classification)	-	0	-
"Cl. 8 IS 4159:2021"(Protection against access to live parts)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.2 of IS 4159:2021(Marking)	-	0	-
Cl.7.3 of IS 4159:2021(Marking)	-	0	-
"Cl. 9 IS 4159:2021"(Starting of motor operated appliances)	-	0	-
"Cl. 10 IS 4159:2021"(Power Input and Current)	-	0	-
"Cl. 11 IS 4159:2021"(Heating)	-	0	-
"Cl. 13 IS 4159:2021"(Leakage Current & Electrical Strength at Operating Temperature)	-	0	-
"Cl. 14 IS 4159:2021"(Transient Over Voltage)	-	0	-
"Cl. 15 IS 4159:2021"(Moisture Resistance)	-	0	-
"Cl. 16 IS 4159:2021"(Leakage Current and Electric strength)	-	0	-
"Cl. 17 IS 4159:2021"(Overload protection of transformers and associated circuits.)	-	0	-
"Cl. 18 IS 4159:2021"(Endurance)	-	0	-
"Cl. 19 IS 4159:2021"(Abnormal Operation)	-	0	-
"Cl. 20 IS 4159:2021"(Stability and mechanical Hazards)	-	0	-
"Cl. 21 IS 4159:2021"(Mechanical Strength)	-	0	-
"Cl. 22 IS 4159:2021"(Construction)	-	0	-
"Cl. 23 IS 4159:2021"(Internal Wiring)	-	0	-
"Cl. 24 IS 4159:2021"(Components)	-	0	-
"Cl. 25 IS 4159:2021"(Supply Connections and External Flexible Cables and Cords)	-	0	-
"Cl. 26 IS 4159:2021"(Terminal For External Conductors)	-	0	-
"Cl. 27 IS 4159:2021"(Provision For Earthing)	-	0	-
"Cl. 28 IS 4159:2021"(Screws and Connections)	-	0	-
"Cl. 29 IS 4159:2021"(Creepage Distances, Clearances And Distances Through Insulation)	-	0	-
"Cl. 30 IS 4159:2021"(Resistance To Heat, Fire And Tracking)	-	0	-
"Cl. 31 IS 4159:2021"(Resistance To Rusting)	-	0	-
Cl.22.103 of IS 4159:2021(Construction)	-	0	-
Cl.22.104 of IS 4159:2021(Construction)	-	0	-
Cl.22.106 of IS 4159:2021(Construction)	-	0	-
Cl.22.107 of IS 4159:2021(Construction)	-	0	-
Cl.22.108 of IS 4159:2021(Construction)	-	0	-
Cl.22.109 of IS 4159:2021(Construction)	-	0	-
Cl.22.110 of IS 4159:2021(Construction)	-	0	-
Cl.22.111 of IS 4159:2021(Construction)	-	0	-
Cl.27 & IS 302-1: 2008(Provision for Earthing)	-	0	-
Cl.27 & IS 302-1: 2008(Provision for Earthing)	-	0	-
Cl.28.1 & IS 302-1: 2008(Screws & Connection)	-	0	-
Cl.28.4 IS 302-1: 2008(Screws & Connection)	-	0	-
Cl. 29.1 & IS 302-1: 2008(Creepage Distances & Clearances)	-	0	-
Cl. 29.2 & IS 302-1: 2009(Creepage Distances & Clearances)	-	0	-
Cl.19.2 of IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19.3 of IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.10 of IS 302-1:2008(Power Input & Current)	-	0	-
Cl.11 of IS 4159:2021 & IS 302‐1:2008(Heating)	-	0	-
Cl.11 of IS 4159:2021 & IS 302‐1:2008(Heating)	-	0	-
Cl.11.2 of IS 4159:2021(Heating)	-	0	-
Cl.11.101 of IS 4159:2021(Heating)	-	0	-
Cl.22.101 of IS 4159:2021(Construction)	-	0	-
Cl.22.102 of IS 4159:2021(Construction)	-	0	-
Cl.22.105 of IS 4159:2021(Construction)	-	0	-
Cl.18 of IS 4159:2021(Endurance Test)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.22.106(CONSTRUCTION)	-	0	-

22 Jul, 2028

-
Included w.e.f. 01.09.2025 Exclusion: "19.11.4.7 (Harmonics) 19.11.4.4 (Surge immunity test) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.3 (Fast transient bursts) 19.11.4.2 (Radiated fields) 19.11.4.1 (Electrostatic discharges) ""Cl. 102 IS 4159:2021"" (Leakage and hydrostatic strength (for oil heating elements)) "

3686

Excel Surveyors Pvt. Ltd., Kolkata

5135906

IS 16703 (2017)

Textiles - High density polyethylene (HDPE) polypropylene (PP) woven sacks for packaging of 25 kg polymer materials - Specification

11500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Mass of Bale)	-	0	-
5.2 Table 1(Dimensions)	-	400	-
5.2 Table 1(Dimensions)	-	0	-
5.2 Table 1(Dimensions)	-	0	-
5.2 Table 1(Dimensions)	-	0	-
5.2 Table 1(Ends per dm)	-	200	-
5.2 Table 1(Picks per dm)	-	200	-
5.2 Table 1(Mass of sack, Gusseted type, g - IS 1964)	-	500	-
5.2 Table 1(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N) (kgf): - IS 1969 (Part 1))	-	700	-
5.2 Table 1(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N2) (kgf): - IS 1969 (Part 1))	-	0	-
5.2 Table 1(Breaking strength of bottom seam (Ravelled strip method), Min, N) (kgf) - IS 9030)	-	700	-
5.2 Table 1(Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-	0	-
5.2 Table 1(Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-	0	-
5.2 Table 1(Drop impact strength)	-	800	-
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,a) For UV stabilized sacks)	-	600	-
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,b) For non- UV stabilized sacks)	-	0	-
4.6(Capacity)	-	200	-
4.3.1(Bottom Seam)	-	500	-
4.3(Sacks)	-	150	-
4.2,5.1,5.2,5.3,5.4(Breaking strenght after U.V. Exposure (Warp/Weft))	-	0	-
4.2,5.1,5.2,5.3,5.4,(UV Resistance (192 hrs)(100 x 65+92x40))	-	5000	-
4.2(Linear Density)	-	300	-
4.2(Width of tape)	-	200	-
Cl-4.4(Lamination Mass)	-	200	-
Cl-4.5(Liner- Thickness)	-	200	-
Cl-4.2 (Amendment No-2)(un-laminated fabric mass)	-	350	-
Cl-4.5(Liner- Width)	-	200	Please declare length of liner
Cl-4.5(Liner- Visible defects)	-	100	-

31 Dec, 2026

-
Included w.e.f.04.08.2025 Exclusion 5.1 (Mass of Bale)

3687

Testtex India Laboratories Private Limited, Noida

8138306

IS 15298 : Part 3 (2024)

Personal Protective Equipment Part 3 Protective Footwear (ISO 20346 : 2021, MOD) (Third Revision)

Protective Footwear (Third Revision)

39000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.2(Design)	-	200	-
Cl 5.2.2(" Height of upper ")	-	200	-
Cl 5.2.3(Heel area)	-	200	-
Cl 5.3.1.1(Construction of whole footwear)	-	200	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	700	-
Cl 5.3.2.1(Toe protection - general)	-	200	-
Cl 5.3.2.2(Internal length)	-	200	-
Cl 5.3.2.3(Width of toecap flange)	-	200	-
Cl 5.3.2.4.1(Corrosion resistance of Class I footwear and hybrid mounted footwear)	-	500	-
Cl 5.3.2.4.2(Corrosion resistance of Class II and hybrid moulded footwear)	-	500	-
Cl 5.3.2.5(Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-	3000	-
Cl 5.3.2.6(Impact resistance)	-	1000	-
Cl 5.3.2.7(Compression resistance)	-	1000	-
Cl 5.3.3(Leak proofness)	-	500	-
Cl 5.3.4("Specific ergonomic features ")	-	500	-
Cl 5.3.5.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	2000	-
Cl 5.3.7(Seam strength)	-	500	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	200	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	200	-
Cl 5.4.2(Thickness)	-	200	-
Cl 5.4.3(Tear strength)	-	500	-
Cl 5.4.4, Table 11(Tensile properties- Tensile strength)	-	500	-
Cl 5.4.4, Table 11(Tensile properties- Breaking Force)	-	500	-
Cl 5.4.4, Table 11(Tensile properties-Modulus at 100 % elongation)	-	500	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	500	-
Cl 5.4.5(Flexing resistance)	-	1000	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	1000	-
Cl 5.4.7(Resistance to hydrolysis)	-	3500	-
Cl 5.5.2(Lining- Tear strength)	-	500	-
Cl 5.5.3(Lining- Abrasion resistance)	-	1000	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	1000	-
Cl 5.6.2(Tear strength of tongue)	-	500	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	200	-
Cl 5.7.2(Water permeability of insock)	-	1000	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	1000	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	500	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	1000	-
Cl 5.8.2.1(Thickness of Outsole)	-	200	-
Cl 5.8.2.2(Cleated area)	-	200	-
Cl 5.8.2.3(Cleat height)	-	200	-
Cl 5.8.3(Outsole- Tear strength)	-	500	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	1000	-
Cl 5.8.5(Outsole-Flexing resistance)	-	1000	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	3500	-
Cl 5.8.7(Interlayer bond strength)	-	500	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	1000	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	1000	-
Cl 6.2.1.1.4(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	1000	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	200	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	200	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	1000	-
Cl 6.2.1.4.2.1(Corrosion resistance of perforation resistant metallic insert for Class I footwear and hybrid mounted footwear)	-	500	-
Cl 6.2.1.4.2.2(Corrosion resistance of perforation resistant metallic insert for Class II footwear and hybrid moulded footwear)	-	500	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	3000	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	3500	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	3500	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	1000	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	1000	-
Cl 6.2.4(Energy absorption of seat region)	-	1000	-
Cl 6.2.5(Water resistance)	-	1000	-
Cl 6.2.6.1(Metatarsal protection - Construction)	-	200	-
Cl 6.2.6.2("Metatarsal protection-Impact resistance of metatarsal protective device ")	-	2000	-
Cl 6.2.8.2(Cut resistance footwear- design)	-	200	-
Cl 6.2.8.2(Dimensions and construction of protective area of Cut resistance footwear)	-	4000	-
Cl 6.2.8.3(Resistance to cutting)	-	4000	-
Cl 6.2.9(Scuff cap)	-	1000	-
Cl 6.2.10("Slip resistance on ceramic tile floor with glycerine ")	-	2000	-
Cl 6.3(Upper — Water penetration and absorption)	-	1000	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	1000	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	1000	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	500	-
Cl 6.4.3.2(Design of Ladder grip)	-	200	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	200	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	200	-
Cl 5.3.6, Table no 1 of IS 17011 (i)(Allergenic and carcinogenic disperse dyes)	-	6000	-
Cl 5.3.6, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	2000	-
Cl 5.3.6, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	2000	-
Cl 5.3.6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	750	-
Cl 5.3.6, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	3000	-
Cl 5.3.6, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	3000	-
Cl 5.3.6, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	3000	-
Cl 5.3.6, Table no 1 of IS 17011 (x)(pH)	-	500	-
Cl 5.3.6, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	4000	-
Cl 5.3.6, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	5000	-
Cl 5.3.8(Lead Content ( National Annex A))	-	1000	-
Cl 7("Marking ")	-	0	-
Cl 7("Marking ")	-	0	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	0	repeated clause.
Cl 5.2(Design)	-	-	-
Cl 5.2.2(" Height of upper ")	-	-	-
Cl 5.2.3(Heel area)	-	-	-
Cl 5.3.1.1(Construction of whole footwear)	-	-	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	-	-
Cl 5.3.2.1(Toe protection - general)	-	-	-
Cl 5.3.2.2(Internal length)	-	-	-
Cl 5.3.2.3(Width of toecap flange)	-	-	-
Cl 5.3.2.4.1(Corrosion resistance of Class I footwear and hybrid mounted footwear)	-	-	-
Cl 5.3.2.4.2(Corrosion resistance of Class II and hybrid moulded footwear)	-	-	-
Cl 5.3.2.5(Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-	-	-
Cl 5.3.2.6(Impact resistance)	-	-	-
Cl 5.3.2.7(Compression resistance)	-	-	-
Cl 5.3.3(Leak proofness)	-	-	-
Cl 5.3.4("Specific ergonomic features ")	-	-	-
Cl 5.3.5.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	-	-
Cl 5.3.7(Seam strength)	-	-	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	-	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	-	-
Cl 5.4.2(Thickness)	-	-	-
Cl 5.4.3(Tear strength)	-	-	-
Cl 5.4.4, Table 11(Tensile properties- Tensile strength)	-	-	-
Cl 5.4.4, Table 11(Tensile properties- Breaking Force)	-	-	-
Cl 5.4.4, Table 11(Tensile properties-Modulus at 100 % elongation)	-	-	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	-	-
Cl 5.4.5(Flexing resistance)	-	-	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	-	-
Cl 5.4.7(Resistance to hydrolysis)	-	-	-
Cl 5.5.2(Lining- Tear strength)	-	-	-
Cl 5.5.3(Lining- Abrasion resistance)	-	-	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	-	-
Cl 5.6.2(Tear strength of tongue)	-	-	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	-	-
Cl 5.7.2(Water permeability of insock)	-	-	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	-	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	-	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	-	-
Cl 5.8.2.1(Thickness of Outsole)	-	-	-
Cl 5.8.2.2(Cleated area)	-	-	-
Cl 5.8.2.3(Cleat height)	-	-	-
Cl 5.8.3(Outsole- Tear strength)	-	-	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	-	-
Cl 5.8.5(Outsole-Flexing resistance)	-	-	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	-	-
Cl 5.8.7(Interlayer bond strength)	-	-	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	-	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	-	-
Cl 6.2.1.1.4(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	-	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	-	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	-	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	-	-
Cl 6.2.1.4.2.1(Corrosion resistance of perforation resistant metallic insert for Class I footwear and hybrid mounted footwear)	-	-	-
Cl 6.2.1.4.2.2(Corrosion resistance of perforation resistant metallic insert for Class II footwear and hybrid moulded footwear)	-	-	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	-	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	-	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	-	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	-	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	-	-
Cl 6.2.4(Energy absorption of seat region)	-	-	-
Cl 6.2.5(Water resistance)	-	-	-
Cl 6.2.6.1(Metatarsal protection - Construction)	-	-	-
Cl 6.2.6.2("Metatarsal protection-Impact resistance of metatarsal protective device ")	-	-	-
Cl 6.2.8.2(Cut resistance footwear- design)	-	-	-
Cl 6.2.8.2(Dimensions and construction of protective area of Cut resistance footwear)	-	-	-
Cl 6.2.8.3(Resistance to cutting)	-	-	-
Cl 6.2.9(Scuff cap)	-	-	-
Cl 6.2.10("Slip resistance on ceramic tile floor with glycerine ")	-	-	-
Cl 6.3(Upper — Water penetration and absorption)	-	-	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	-	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	-	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	-	-
Cl 6.4.3.2(Design of Ladder grip)	-	-	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	-	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (i)(Allergenic and carcinogenic disperse dyes)	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	-	-
Cl 5.3.6, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (x)(pH)	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	-	-
Cl 5.3.8(Lead Content ( National Annex A))	-	-	-
Cl 7("Marking ")	-	-	-
Cl 7("Marking ")	-	-	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	-	-

-
Included w.e.f 11.09.2025 Exclusion: Cl 6.2.7 (Ankle protection)

3688

TUV SUD SOUTH ASIA PRIVATE LIMITED RANIPET

6191806

IS 15844 : Part 1 (2023)

SPORTS FOOTWEAR PART -1 GENERAL PURPOSEFirst Revision

69900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl No.4.1(Sampling and Conditioning)	-	500	-
Clause 4.2 - 4.2.1(Construction)	-	500	-
Cl-5, Table -1 S. No-(i) (Amendment No-1)(Insole)	-	500	-
Cl-5, Table -1 S. No- (ii) (Amendment No-1)(Toe spring height)	-	500	-
Cl-5, Table -1 S. No- (iii) (Amendment No-1)("Bond performance (a) Upper to sole/mid sole/composite sole (b) Interlayer bond strength")	-	600	-
Cl-5, Table -1 S. No- (iv) (Amendment No-1)(Energy absorption at seat region)	-	800	-
Cl-5, Table -1 S. No- (v) (Amendment No-1)(Complete shoe flexing)	-	1600	-
Cl-5, Table -1 S. No-(vi) (Amendment No-1)(Washability)	-	2000	-
Cl-5, Table -1 S. No- (vii) (Amendment No-1)(Slip resistance, coefficient of friction (COF),)	-	2800	-
Cl-5, Table -1 S. No- (viii) (Amendment No-1)("Abrasion resistance a-Cellular sole b-Solid sole")	-	960	-
Cl-5, Table -1 S. No- (xi) (Amendment No-1)(Hydrolysis resistance)	-	5200	-
Cl-6, Table -2 S. No- (i) (Amendment No-1)(Tear strength)	-	440	-
Cl-6, Table -2 S. No- (ii) (Amendment No-1)("Colour fastness rubbing a-Dry: (rubbing) b-Wet: (rubbing)")	-	480	-
Cl-6, Table -2 S. No- (iii), a) (Amendment No-1)(Water vapour permeability)	-	1000	-
Cl-6, Table -2 S. No- (iii), b) (Amendment No-1)(Water vapour coefficient)	-	1800	-
Cl-6, Table -2 S. No- (iv),(Amendment No-1)(Stitch tear strength)	-	440	-
Cl-6, Table -2 S. No- (v),(Amendment No-1)(Colour fastness to light grey scale rate,)	-	800	-
Cl-6, Table -3 S. No- (i),(Amendment No-1)(Breaking strength, N/mm, Min)	-	440	-
Cl-6, Table -3 S. No- (ii),(Amendment No-1)("Elongation at break a-Tighter direction b-Stretch direction")	-	440	-
Cl-6, Table -3 S. No- (iii),(Amendment No-1)("Tear strength, N, Min a) For fabric b) For all other materials")	-	440	-
Cl-6, Table -3 S. No- (iv),(Amendment No-1)("Flexing resistance a- Dry condition b-Wet condition")	-	1000	-
Cl-6, Table -3 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	1000	-
Cl-6, Table -3 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	1800	-
Cl-6, Table -3 S. No- (vi), (Amendment No-1)(Hydrolysis resistance)	-	4000	-
Cl-6, Table -3 S. No- (vii), (Amendment No-1)(Bursting strength)	-	400	-
Cl-6, Table -4 S. No- (i),(Amendment No-1)(Tear strength, N, Min)	-	440	-
Cl-6, Table -4 S. No- (ii),(Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	800	-
Cl-6, Table -4 S. No- (iii),(Amendment No-1)(Colour fastness to rubbing , grey scale rate with 10 rubs on dry or wet, Min)	-	440	-
Cl-6, Table -4 S. No- (iv),(Amendment No-1)(Colour fastness to perspiration)	-	440	-
Cl-6, Table -4 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	1000	-
Cl-6, Table -4 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	1800	-
Cl-6, Table -5 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	400	-
Cl-6, Table -5 S. No-(ii), (Amendment No-1)(Flexing index, Min)	-	800	-
Cl-6, Table -5 S. No-(iii), (Amendment No-1)(Abrasion resistance,)	-	800	-
Cl-6, Table -5 S. No- (iv), a (Amendment No-1)(Water absorption)	-	800	-
Cl-6, Table -5 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	800	-
Cl-6, Table -6 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	400	-
Cl-6, Table -6 S. No- (ii), (Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	800	-
Cl-6, Table -6 S. No- (iii),a (Amendment No-1)(Water absorption)	-	800	-
Cl-6, Table -6 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	800	-
Cl-6, Table -7 S. No- (i), (Amendment No-1)(Flexing resistance (Belt method or Bennewart method))	-	1200	-
Cl-6, Table -7 S. No- (ii), (Amendment No-1)(Hydrolysis resistance, cut growth after flexes)	-	5200	-
Cl-6, Table -8 S. No- (i), (Amendment No-1)("Compression set, percent, Max a) For EVA b) For all other materials")	-	800	-
Cl-6, Table -8 S. No- (ii), (Amendment No-1)(Split tear strength)	-	440	-
Cl-6, Table -8 S. No- (iii), (Amendment No-1)(Heat shrinkage)	-	800	-
Cl-6, Table -9 S. No- (i), (Amendment No-1)(First dry collapsing load, hardness)	-	1000	-
Cl-6, Table -9 S. No- (ii), (Amendment No-1)(Resilience, percent)	-	1000	-
Cl-6, Table -9 S. No- (iii), (Amendment No-1)(Moisture resistance)	-	1000	-
Cl-6, Table -9 S. No- (iv), a (Amendment No-1)(Initial dry area shape retention)	-	1000	-
Cl-6, Table -9 S. No- (iv), b (Amendment No-1)(Area shape retention after 10th collapse)	-	1000	-
Cl-6, Table -10 S. No- (i), (Amendment No-1)("Peel strength a) Initial b) After 5 000 wear cycles")	-	2400	-
Cl-6, Table -10 S. No- (ii), (Amendment No-1)("Shear strength a) Initial b) After 5 000 wear cycles")	-	2400	-
Cl-6, Table -11 S. No- (i), (Amendment No-1)(Limit of useful extension)	-	1000	-
Cl-6, Table -12 S. No- (i), (Amendment No-1)(Breaking strength of lace)	-	600	-
Cl-6, Table -12 S. No- (ii), (Amendment No-1)(Lace tag strength)	-	600	-
Cl-6, Table -12 S. No- (iii), (Amendment No-1)(Lace to lace abrasion)	-	1200	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	480	-
Cl-6, Table -12 S. No (v), (Amendment No-1)(Strength of buckle/ski hook)	-	600	-
Cl-6, Table -12 S. No- (vi), (Amendment No-1)(Corrosion resistance)	-	800	-
Cl No . 4.14, Table no. 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	5600	-
Cl No . 4.14, Table no. 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	2400	-
Cl No . 4.14, Table no. 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	2400	-
Cl No . 4.14, Table no. 1 of IS 17011(iv)(Chromium (VI))	-	1200	-
Cl No . 4.14, Table no. 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	2800	-
Cl No . 4.14, Table no. 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	960	-
Cl No . 4.14, Table no. 1 of IS 17011(vii)(Formaldehyde)	-	960	-
Cl No . 4.14, Table no. 1 of IS 17011(viii)(Organotin compounds)	-	4000	-
Cl No . 4.14, Table no. 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	2800	-
Cl No . 4.14, Table no. 1 of IS 17011(x)(pH)	-	400	-
Cl No . 4.14, Table no. 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	4000	-
Cl No . 4.14, Table no. 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	1600	-
Clause 4.2 - 4.2.2(Construction)	-	500	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	480	-
Cl-5, Table -1 S. No- (x) (Amendment No-1)(Chemical requirements)	-	42000	-
Cl-5, Table -1 S. No- (xii) (Amendment No-1)(Lead content)	-	1200	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	2800	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	2800	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	2800	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	2800	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	2800	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	2800	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	2800	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	4000	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	4000	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	4000	-
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	4000	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	4000	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	4000	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	4000	-
Cl.4.1 (Table B-1 Sl I)(Aromatic Amines: 4-aminobiphenyl)	-	2800	-
Cl.4.1 (Table B-1 Sl II)(Aromatic Amines: Benzidine)	-	2800	-
Cl.4.1 (Table B-1 Sl III)(Aromatic Amines: 4-chloro-o-toluidine)	-	2800	-
Cl.4.1 (Table B-1 Sl IV)(Aromatic Amines: 2-naphthylamine)	-	2800	-
Cl.4.1 (Table B-1 Sl V)(Aromatic Amines :o-aminoazotoluene)	-	2800	-
Cl.4.1 (Table B-1 Sl VI)(Aromatic Amines: 2-amino-4-nitrotoluenem)	-	2800	-
Cl.4.1 (Table B-1 Sl VII)(Aromatic Amines: p-chloroaniline)	-	2800	-
Cl.4.1 (Table B-1 Sl VIII)(Aromatic Amines: 2,4-diaminoanisole)	-	2800	-
Cl.4.1 (Table B-1 Sl IX)(Aromatic Amines : 4,4’- diaminodiphenylmethane:)	-	2800	-
Cl.4.1 (Table B-1 Sl X)(Aromatic Amines : 3,3’-dichlorobenzidine)	-	2800	-
Cl.4.1 (Table B-1 Sl XI)(Aromatic Amines : 3,3’-dimethoxybenzidine)	-	2800	-
Cl.4.1 (Table B-1 Sl XII)(Aromatic Amines : 3,3’-dimethylbenzidine)	-	2800	-
Cl.4.1 (Table B-1 Sl XIII)(Aromatic Amines: 3,3’-dimethyl-4,4’-diaminodiphenylmethane)	-	2800	-
Cl.4.1 (Table B-1 Sl XIV)(Aromatic Amines : p-cresi)	-	2800	-
Cl.4.1 (Table B-1 Sl XV)(Aromatic Amines : 4,4’-methylene-bis(2-chloroaniline):)	-	2800	-
Cl.4.1 (Table B-1 Sl XVI)(Aromatic Amines :4,4’-oxydianiline)	-	2800	-
Cl.4.1 (Table B-1 Sl XVII)(Aromatic Amines:4,4’-thiodianiline)	-	2800	-
Cl.4.1 (Table B-1 Sl XIX)(Aromatic Amines: 2,4-toluylendiamine)	-	2800	-
Cl.4.1 (Table B-1 Sl XX)(Aromatic Amines: 2,4,5-trimethylaniline)	-	2800	-
Cl.4.1 (Table B-1 Sl XXI)(Aromatic Amines :2,4-dimethylaniline)	-	2800	-
Cl.4.1 (Table B-1 Sl XXII)(Aromatic Amines: 2,6-dimethylaniline:)	-	2800	-
Cl.4.1 (Table B-1 Sl XXIII)(Aromatic Amines :2-methoxyaniline)	-	2800	-
Cl.4.1 (Table B-1 Sl XXIV)(Aromatic Amines :4-aminoazobenzene)	-	2800	-
Cl.4.1 (Table B-3 Sl I)(Allergenic Disperse Dyes :Disperse blue 3)	-	2800	-
Cl.4.1 (Table B-3 Sl II)(Allergenic Disperse Dyes :Disperse blue 7)	-	2800	-
Cl.4.1 (Table B-3 Sl III)(Allergenic Disperse Dyes :Disperse blue 26)	-	2800	-
Cl.4.1 (Table B-3 Sl IV)(Allergenic Disperse Dyes :Disperse blue 102)	-	2800	-
Cl.4.1 (Table B-3 Sl V)(Allergenic Disperse Dyes: Disperse brown 1)	-	2800	-
Cl.4.1 (Table B-3 Sl VI)(Allergenic Disperse Dyes :Disperse yellow 1)	-	2800	-
Cl.4.1 (Table B-3 Sl VII)(Allergenic Disperse Dyes :Disperse yellow 9)	-	2800	-
Cl.4.1 (Table B-3 Sl VIII)(Allergenic Disperse Dyes :Disperse yellow 39)	-	2800	-
Cl.4.1 (Table B-3 Sl IX)(Allergenic Disperse Dyes :Disperse yellow 49)	-	2800	-
Cl.4.1 (Table B-3 Sl X)(Allergenic Disperse Dyes :Disperse orange 1)	-	2800	-
Cl.4.1 (Table B-3 Sl XI)(Allergenic Disperse Dyes :Disperse red 11)	-	2800	-
Cl.4.1 (Table B-3 Sl XII)(Allergenic Disperse Dyes :Disperse red 17)	-	2800	-
Cl.4.1 (Table B-3 Sl XIII)(Allergenic Disperse Dyes :Disperse yellow 7)	-	2800	-
Cl.4.1 (Table B-3 Sl XIV)(Allergenic Disperse Dyes :Disperse yellow 56)	-	2800	-
Cl.4.1 (Table B-3 Sl XV)(Allergenic Disperse Dyes :Disperse red 151)	-	2800	-
Cl.4.1 (Table B-3 Sl XVI)(Allergenic Disperse Dyes :Solvent red 23)	-	2800	-
Cl.4.1 (Table B-4 Sl I)(Carcinogenic Disperse Dyes :Navy blue)	-	2800	-
Cl.4.1 (Table B-4 Sl II)(Carcinogenic Disperse Dyes: Disperse blue 1)	-	2800	-
Cl.4.1 (Table B-4 Sl III)(Carcinogenic Disperse Dyes: Disperse blue 35)	-	2800	-
Cl.4.1 (Table B-4 Sl IV)(Carcinogenic Disperse Dyes :Disperse blue 106)	-	2800	-
Cl.4.1 (Table B-4 Sl V)(Carcinogenic Disperse Dyes: Disperse blue 124)	-	2800	-
Cl.4.1 (Table B-4 Sl VI)(Carcinogenic Disperse Dyes :Disperse yellow 3)	-	2800	-
Cl.4.1 (Table B-4 Sl VIII)(Carcinogenic Disperse Dyes :Disperse orange 37/59/76a))	-	2800	-
Cl.4.1 (Table B-4 Sl IX)(Carcinogenic Disperse Dyes :Disperse red 1)	-	2800	-
Cl.4.1 (Table B-4 Sl X)(Carcinogenic Disperse Dyes :Basic red 9)	-	2800	-
Cl.4.1 (Table B-4 Sl XI)(Carcinogenic Disperse Dyes :Violet 3)	-	2800	-
Cl.4.1 (Table B-4 Sl XII)(Carcinogenic Disperse Dyes Disperse yellow 23)	-	2800	-
Cl.4.1 (Table B-11)(PCP-TeCP-TriCP polychlorophenols)	-	2800	-
Cl.4.1 (Table B-3)(Allergenic and Carcinogenic Disperse Dyes)	-	5600	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	4000	-
Cl.4.1 (Table B-1 Sl XVIII)(Aromatic Amines :o-toluidine:)	-	2400	-
Cl.4.1 (Table B-4 Sl VII)(Carcinogenic Disperse Dyes: Disperse orange 3)	-	2800	-
Cl No . 5(MARKING AND PACKING)	-	500	-

02 Dec, 2028

-
-

3689

Atckon Laboratories LLP, Bahadurgarh

8186436

IS 878 (2008)

Laboratory glassware - Graduated measuring cylinders (Second Revision)

ALL

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table-1(Nominal capacity)	-	500	-
Table-1(Overall height)	-	500	-
Table-1(Distance from top of scale to top of cylinder)	-	500	-
Table-1(Internal height to highest graduation line)	-	500	-
Table-1(Sub-divisions)	-	500	-
Table-1(capacity at lowest graduation line)	-	500	-
Cl-9.1(Wall thickness)	-	500	-
Cl-9.2(Stability)	-	500	-
Cl-9.3(Base)	-	500	-
Cl-9.4(Rim and spout)	-	500	-
Cl-9.5(Neck and stopper)	-	500	-
Cl-9.6, Table-2(Nominal capacity)	-	500	-
Cl-9.6, Table-2(Overall height)	-	500	-
Cl-9.6, Table-2(Distance from top of scale to top of cylinder)	-	500	-
Cl-9.6, Table-2(Internal height to highest graduation line)	-	500	-
Cl-9.6, Table-2(Sub divisions)	-	500	-
Cl-9.6, Table-2(capacity at lowest graduation line)	-	500	-
Cl-10.1(Graduation)	-	500	-
Cl-10.2(Figuring)	-	500	-
Cl-11(Accuracy testing)	-	500	-
Cl-13(Visibility of graduation lines, figures and marking)	-	0	-
Clause. 8.0(Material)	-	0	-
Table- 1(Max. Permissible Error (Class- a))	-	0	-
Table- 1(Max. Permissible Error (Class- b))	-	0	-
Table- 2(Max. Permissible Error (Type-2))	-	0	-

19 Jun, 2028

-
Included w.e.f 18.08.2025

3690

Unique Test House LLP

9134536

IS 11587 (1986)

Specification for structural weather resistant steels

WR-Fe- 480A, 480B, 500, Plates, Strips, Sections, Angle, Tees, Beams, Channels, Flats, All Size.

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4(Grades)	-	100	...
Cl 8(Tensile Test)	-	100	...
Cl 9(Bend Test)	-	200	...
Cl 10(Impact Test)	-	200	...
Cl 11(Flattening Test)	-	100	..
Cl 12(Freedom from Defects)	-	200	...
Cl 13(Dimensions)	-	200	..
Cl 16(Mass)	-	200	...
Cl 4(Grades)	-	200	...
Cl 8(Tensile Test)	-	200	...
Cl 9(Bend Test)	-	200	...
Cl 10(Impact Test)	-	200	...
Cl 11(Flattening Test)	-	200	...
Cl 12(Freedom from Defects)	-	200	..
Cl 13(Dimensions)	-	100	...
Cl 16(Mass)	-	200	...
Clause 5.1, Table -1(WR-Fe 480 A, C )	-	100	...
Clause 5.1, Table -1(WR-Fe 480 A, Si)	-	100	...
Clause 5.1, Table -1(WR-Fe 480 A, Mn)	-	100	..
Clause 5.1, Table -1(WR-Fe 480 A, P )	-	100	..
Clause 5.1, Table -1(WR-Fe 480 A, S )	-	100	....
Clause 5.1, Table -1(WR-Fe 480 A, Cr )	-	100	....
Clause 5.1, Table -1(WR-Fe 480 A, Ni)	-	200	..
Clause 5.1, Table -1(WR-Fe 480 A, Cu)	-	200	....
Clause 5.1, Table -1(WR-Fe 480 B, C )	-	200	...
Clause 5.1, Table -1(WR-Fe 480 B, Si)	-	200	..
Clause 5.1, Table -1(WR-Fe 480 B, Mn)	-	100	...
Clause 5.1, Table -1(WR-Fe 480 B, P )	-	100	...
Clause 5.1, Table -1(WR-Fe 480 B, S )	-	100	....
Clause 5.1, Table -1(WR-Fe 480 B, Cr )	-	100	....
Clause 5.1, Table -1(WR-Fe 480 B, Cu)	-	100	...
Clause 5.1, Table -1(WR-Fe 480 B, V)	-	100	....
Clause 5.1, Table -1(WR-Fe 500, C)	-	100	...
Clause 5.1, Table -1(WR-Fe 500, Si)	-	100	...
Clause 5.1, Table -1(WR-Fe 500, Mn)	-	100	....
Clause 5.1, Table -1(WR-Fe 500, P)	-	100	....
Clause 5.1, Table -1(WR-Fe 500, S)	-	100	....
Clause 5.1, Table -1(WR-Fe 500, Cr)	-	100	.....
Clause 5.1, Table -1(WR-Fe 500, V)	-	100	......
Cl. 13, 14(Out of Square)	-	200	....
Cl. 13, 14(Square Size)	-	200	...
Cl. 13, 14(Out of Round)	-	200	....
Cl. 13, 14(Diameter)	-	100	.....
Cl. 13, 14(Sweep)	-	200	...
Cl. 13, 14(Flateness of Web (Channel))	-	200	...
Cl. 13, 14(Flange out of square or Out of parallel (Channel))	-	200	.....
Cl. 13, 14(Width of flange (Channel))	-	200	...
Cl. 13, 14(Depth (Channel))	-	200	.....
Cl. 13, 14(Off Centre of Web)	-	200	.....
Cl. 13, 14(Flange out of square (I beam))	-	100	....
Cl. 13, 14(Width of flange (I Beam))	-	200	......
Cl. 13, 14(Depth (I Beam))	-	200	.....
Cl. 13, 14(Mass (Plate))	-	200	.....
Cl. 13, 14(Flange Slope)	-	200	.....
Cl. 13, 14(Web Thickness)	-	100	.....
Cl. 13, 14(Flange Thickness)	-	100	.....
Cl. 13, 14(Out of Square (Flat))	-	200	.....
Cl. 13, 14(Width )	-	100	....
Cl. 13, 14(Thickness )	-	200	....
Cl. 13, 14(Sectional Area )	-	200	.....
Cl. 13, 14(Camber )	-	200	.....
Cl. 13, 14(Weight)	-	100	...
Cl. 13, 14(Leg Length Difference (Angle))	-	200	....
Cl. 13, 14(Leg Length B (Angle))	-	200	.....
Cl. 13, 14(Leg Length A (Angle))	-	200	.....
Cl. 13, 14(Toe Radius R2)	-	200	....
Cl. 13, 14(Root Radius R1)	-	200	.....
Cl. 8, Table 2(Elongation)	-	200	.....
Cl. 8, Table 2(Yield Stress)	-	100	....
Cl 16(Mass)	-	200	.....
Cl 13(Dimensions)	-	200	..
Cl 12(Freedom from Defects)	-	200	....
Cl 11(Flattening Test)	-	200	...
Cl 10(Impact Test)	-	200	.....
Cl 9(Bend Test)	-	200	......
Cl 8(Tensile Test)	-	200	.....
Cl 4(Grades)	-	200	......
Cl 4(Grades)	-	200	...
Cl 8(Tensile Test)	-	200	....
Cl 9(Bend Test)	-	200	..
Cl 10(Impact Test)	-	200	....
Cl 11(Flattening Test)	-	100	.....
Cl 12(Freedom from Defects)	-	100	...
Cl 13(Dimensions)	-	100	....
Cl 16(Mass)	-	100	.....
Cl. 13, 14(Out of Square (Angle))	-	100	....
Cl 4(Grades)	-	200	....
Cl 8(Tensile Test)	-	200	......
Cl 9(Bend Test)	-	200	.......
Cl 10(Impact Test)	-	200	.....
Cl 11(Flattening Test)	-	200	.....
Cl 12(Freedom from Defects)	-	200	......
Cl 13(Dimensions)	-	200	.....
Cl 16(Mass)	-	200	.....
Cl 4(Grades)	-	200	....
Cl 8(Tensile Test)	-	200	....
Cl 9(Bend Test)	-	200	....
Cl 10(Impact Test)	-	200	.....
Cl 11(Flattening Test)	-	200	.....
Cl 12(Freedom from Defects)	-	200	...
Cl 13(Dimensions)	-	200	.....
Cl 16(Mass)	-	100	...
Clause 5.1, Table -1(WR-Fe 480 A, C )	-	200	.....
Clause 5.1, Table -1(WR-Fe 480 A, Si)	-	200	....
Clause 5.1, Table -1(WR-Fe 480 A, Mn)	-	200	....
Clause 5.1, Table -1(WR-Fe 480 A, P )	-	200	.....
Clause 5.1, Table -1(WR-Fe 480 A, S )	-	200	....
Clause 5.1, Table -1(WR-Fe 480 A, Cr )	-	200	....
Clause 5.1, Table -1(WR-Fe 480 A, Ni)	-	200	....
Clause 5.1, Table -1(WR-Fe 480 A, Cu)	-	200	....
Clause 5.1, Table -1(WR-Fe 480 B, C )	-	200	......
Clause 5.1, Table -1(WR-Fe 480 B, Si)	-	200	.....
Clause 5.1, Table -1(WR-Fe 480 B, Mn)	-	200	....
Clause 5.1, Table -1(WR-Fe 480 B, P )	-	200	.....
Clause 5.1, Table -1(WR-Fe 480 B, S )	-	200	....
Clause 5.1, Table -1(WR-Fe 480 B, Cr )	-	200	.....
Clause 5.1, Table -1(WR-Fe 480 B, Cu)	-	200	......
Clause 5.1, Table -1(WR-Fe 480 B, V)	-	200	.....
Clause 5.1, Table -1(WR-Fe 500, C)	-	200	....
Clause 5.1, Table -1(WR-Fe 500, Si)	-	200	.....
Clause 5.1, Table -1(WR-Fe 500, Mn)	-	200	...
Clause 5.1, Table -1(WR-Fe 500, P)	-	200	....
Clause 5.1, Table -1(WR-Fe 500, S)	-	200	......
Clause 5.1, Table -1(WR-Fe 500, Cr)	-	200	....
Clause 5.1, Table -1(WR-Fe 500, V)	-	200	.....
Cl. 13, 14(Out of Square)	-	200	......
Cl. 13, 14(Square Size)	-	200	.....
Cl. 13, 14(Out of Round)	-	200	.....
Cl. 13, 14(Diameter)	-	200	......
Cl. 13, 14(Sweep)	-	200	....
Cl. 13, 14(Flateness of Web (Channel))	-	200	.....
Cl. 13, 14(Flange out of square or Out of parallel (Channel))	-	200	......
Cl. 13, 14(Width of flange (Channel))	-	200	.....
Cl. 13, 14(Depth (Channel))	-	100	......
Cl. 13, 14(Off Centre of Web)	-	200	......
Cl. 13, 14(Flange out of square (I beam))	-	200	.......
Cl. 13, 14(Width of flange (I Beam))	-	200	......
Cl. 13, 14(Depth (I Beam))	-	200	......
Cl. 13, 14(Mass (Plate))	-	200	......
Cl. 13, 14(Flange Slope)	-	200	......
Cl. 13, 14(Web Thickness)	-	200	......
Cl. 13, 14(Flange Thickness)	-	200	......
Cl. 13, 14(Out of Square (Flat))	-	100	....
Cl. 13, 14(Width )	-	200	.....
Cl. 13, 14(Thickness )	-	200	.....
Cl. 13, 14(Sectional Area )	-	200	.......
Cl. 13, 14(Camber )	-	200	......
Cl. 13, 14(Weight)	-	200	......
Cl. 13, 14(Leg Length Difference (Angle))	-	200	......
Cl. 13, 14(Leg Length B (Angle))	-	200	....
Cl. 13, 14(Leg Length A (Angle))	-	200	......
Cl. 13, 14(Toe Radius R2)	-	200	......
Cl. 13, 14(Root Radius R1)	-	100	......
Cl. 8, Table 2(Elongation)	-	200	.....
Cl. 8, Table 2(Yield Stress)	-	200	.....
Cl 16(Mass)	-	200	.....
Cl 13(Dimensions)	-	200	......
Cl 12(Freedom from Defects)	-	200	......
Cl 11(Flattening Test)	-	200	.....
Cl 10(Impact Test)	-	200	.....
Cl 9(Bend Test)	-	200	......
Cl 8(Tensile Test)	-	200	.....
Cl 4(Grades)	-	200	.....
Cl 4(Grades)	-	200	.....
Cl 8(Tensile Test)	-	200	....
Cl 9(Bend Test)	-	200	.....
Cl 10(Impact Test)	-	200	....
Cl 11(Flattening Test)	-	200	.....
Cl 12(Freedom from Defects)	-	200	.....
Cl 13(Dimensions)	-	200	.....
Cl 16(Mass)	-	200	.....
Cl. 13, 14(Out of Square (Angle))	-	200	......
Cl 4(Grades)	-	200	....
Cl 8(Tensile Test)	-	200	.....
Cl 9(Bend Test)	-	200	.....
Cl 10(Impact Test)	-	200	....
Cl 11(Flattening Test)	-	200	...
Cl 12(Freedom from Defects)	-	200	.....
Cl 13(Dimensions)	-	200	...
Cl 16(Mass)	-	200	...........
Cl 4(Grades)	-	200	.....
Cl 8(Tensile Test)	-	200	.....
Cl 9(Bend Test)	-	200	.....
Cl 10(Impact Test)	-	200	.....
Cl 11(Flattening Test)	-	200	....
Cl 12(Freedom from Defects)	-	200	.....
Cl 13(Dimensions)	-	200	....
Cl 16(Mass)	-	200	.....
Clause 5.1, Table -1(WR-Fe 480 A, C )	-	200	.....
Clause 5.1, Table -1(WR-Fe 480 A, Si)	-	200	......
Clause 5.1, Table -1(WR-Fe 480 A, Mn)	-	200	.....
Clause 5.1, Table -1(WR-Fe 480 A, P )	-	200	..........
Clause 5.1, Table -1(WR-Fe 480 A, S )	-	200	.......
Clause 5.1, Table -1(WR-Fe 480 A, Cr )	-	200	......
Clause 5.1, Table -1(WR-Fe 480 A, Ni)	-	200	.......
Clause 5.1, Table -1(WR-Fe 480 A, Cu)	-	200	......
Clause 5.1, Table -1(WR-Fe 480 B, C )	-	200	......
Clause 5.1, Table -1(WR-Fe 480 B, Si)	-	200	........
Clause 5.1, Table -1(WR-Fe 480 B, Mn)	-	200	.........
Clause 5.1, Table -1(WR-Fe 480 B, P )	-	200	.......
Clause 5.1, Table -1(WR-Fe 480 B, S )	-	200	..........
Clause 5.1, Table -1(WR-Fe 480 B, Cr )	-	200	........
Clause 5.1, Table -1(WR-Fe 480 B, Cu)	-	200	..........
Clause 5.1, Table -1(WR-Fe 480 B, V)	-	200	........
Clause 5.1, Table -1(WR-Fe 500, C)	-	200	..........
Clause 5.1, Table -1(WR-Fe 500, Si)	-	200	........
Clause 5.1, Table -1(WR-Fe 500, Mn)	-	200	..........
Clause 5.1, Table -1(WR-Fe 500, P)	-	200	......
Clause 5.1, Table -1(WR-Fe 500, S)	-	200	.....
Clause 5.1, Table -1(WR-Fe 500, Cr)	-	200	.......
Clause 5.1, Table -1(WR-Fe 500, V)	-	200	.........
Cl. 13, 14(Out of Square)	-	200	.......
Cl. 13, 14(Square Size)	-	200	........
Cl. 13, 14(Out of Round)	-	200	.......
Cl. 13, 14(Diameter)	-	200	.........
Cl. 13, 14(Sweep)	-	200	.......
Cl. 13, 14(Flateness of Web (Channel))	-	200	........
Cl. 13, 14(Flange out of square or Out of parallel (Channel))	-	200	......
Cl. 13, 14(Width of flange (Channel))	-	200	.......
Cl. 13, 14(Depth (Channel))	-	200	.......
Cl. 13, 14(Off Centre of Web)	-	200	.......
Cl. 13, 14(Flange out of square (I beam))	-	200	........
Cl. 13, 14(Width of flange (I Beam))	-	200	........
Cl. 13, 14(Depth (I Beam))	-	200	........
Cl. 13, 14(Mass (Plate))	-	200	.........
Cl. 13, 14(Flange Slope)	-	200	.........
Cl. 13, 14(Web Thickness)	-	200	...........
Cl. 13, 14(Flange Thickness)	-	200	......
Cl. 13, 14(Out of Square (Flat))	-	200	.......
Cl. 13, 14(Width )	-	200	.......
Cl. 13, 14(Thickness )	-	200	.........
Cl. 13, 14(Sectional Area )	-	200	........
Cl. 13, 14(Camber )	-	200	........
Cl. 13, 14(Weight)	-	200	......
Cl. 13, 14(Leg Length Difference (Angle))	-	200	.........
Cl. 13, 14(Leg Length B (Angle))	-	200	......
Cl. 13, 14(Leg Length A (Angle))	-	200	..........
Cl. 13, 14(Toe Radius R2)	-	200	......
Cl. 13, 14(Root Radius R1)	-	200	.......
Cl. 8, Table 2(Elongation)	-	200	........
Cl. 8, Table 2(Yield Stress)	-	200	........
Cl 16(Mass)	-	200	.......
Cl 13(Dimensions)	-	200	.......
Cl 12(Freedom from Defects)	-	200	.......
Cl 11(Flattening Test)	-	200	.......
Cl 10(Impact Test)	-	200	.........
Cl 9(Bend Test)	-	200	........
Cl 8(Tensile Test)	-	200	.......
Cl 4(Grades)	-	200	.........
Cl 4(Grades)	-	200	.........
Cl 8(Tensile Test)	-	200	.........
Cl 9(Bend Test)	-	200	.........
Cl 10(Impact Test)	-	200	.......
Cl 11(Flattening Test)	-	200	.........
Cl 12(Freedom from Defects)	-	200	........
Cl 13(Dimensions)	-	200	........
Cl 16(Mass)	-	200	.........
Cl. 13, 14(Out of Square (Angle))	-	200	...........
Cl 4(Grades)	-	200	..........
Cl 8(Tensile Test)	-	200	..
Cl 9(Bend Test)	-	200	..
Cl 10(Impact Test)	-	200	...
Cl 11(Flattening Test)	-	200	...
Cl 12(Freedom from Defects)	-	200	...
Cl 13(Dimensions)	-	200	..
Cl 16(Mass)	-	200	..
Cl 4(Grades)	-	200	...
Cl 8(Tensile Test)	-	200	..
Cl 9(Bend Test)	-	200	..
Cl 10(Impact Test)	-	200	...
Cl 11(Flattening Test)	-	200	....
Cl 12(Freedom from Defects)	-	200	...
Cl 13(Dimensions)	-	200	...
Cl 16(Mass)	-	200	...
Clause 5.1, Table -1(WR-Fe 480 A, C )	-	200	..
Clause 5.1, Table -1(WR-Fe 480 A, Si)	-	100	....
Clause 5.1, Table -1(WR-Fe 480 A, Mn)	-	100	...
Clause 5.1, Table -1(WR-Fe 480 A, P )	-	200	....
Clause 5.1, Table -1(WR-Fe 480 A, S )	-	200	.......
Clause 5.1, Table -1(WR-Fe 480 A, Cr )	-	200	...
Clause 5.1, Table -1(WR-Fe 480 A, Ni)	-	200	....
Clause 5.1, Table -1(WR-Fe 480 A, Cu)	-	200	.....
Clause 5.1, Table -1(WR-Fe 480 B, C )	-	200	....
Clause 5.1, Table -1(WR-Fe 480 B, Si)	-	200	...
Clause 5.1, Table -1(WR-Fe 480 B, Mn)	-	200	.....
Clause 5.1, Table -1(WR-Fe 480 B, P )	-	200	......
Clause 5.1, Table -1(WR-Fe 480 B, S )	-	200	..
Clause 5.1, Table -1(WR-Fe 480 B, Cr )	-	200	..
Clause 5.1, Table -1(WR-Fe 480 B, Cu)	-	200	.....
Clause 5.1, Table -1(WR-Fe 480 B, V)	-	200	...
Clause 5.1, Table -1(WR-Fe 500, C)	-	200	..
Clause 5.1, Table -1(WR-Fe 500, Si)	-	200	...
Clause 5.1, Table -1(WR-Fe 500, Mn)	-	200	...
Clause 5.1, Table -1(WR-Fe 500, P)	-	200	....
Clause 5.1, Table -1(WR-Fe 500, S)	-	200	...
Clause 5.1, Table -1(WR-Fe 500, Cr)	-	200	.....
Clause 5.1, Table -1(WR-Fe 500, V)	-	200	......
Cl. 13, 14(Out of Square)	-	200	....
Cl. 13, 14(Square Size)	-	200	...
Cl. 13, 14(Out of Round)	-	200	.......
Cl. 13, 14(Diameter)	-	200	.....
Cl. 13, 14(Sweep)	-	200	........
Cl. 13, 14(Flateness of Web (Channel))	-	200	......
Cl. 13, 14(Flange out of square or Out of parallel (Channel))	-	200	.......
Cl. 13, 14(Width of flange (Channel))	-	200	........
Cl. 13, 14(Depth (Channel))	-	200	....
Cl. 13, 14(Off Centre of Web)	-	200	......
Cl. 13, 14(Flange out of square (I beam))	-	200	......
Cl. 13, 14(Width of flange (I Beam))	-	200	......
Cl. 13, 14(Depth (I Beam))	-	200	....
Cl. 13, 14(Mass (Plate))	-	200	.....
Cl. 13, 14(Flange Slope)	-	200	....
Cl. 13, 14(Web Thickness)	-	200	..
Cl. 13, 14(Flange Thickness)	-	200	.....
Cl. 13, 14(Out of Square (Flat))	-	200	......
Cl. 13, 14(Width )	-	200	.....
Cl. 13, 14(Thickness )	-	200	......
Cl. 13, 14(Sectional Area )	-	200	........
Cl. 13, 14(Camber )	-	200	......
Cl. 13, 14(Weight)	-	200	.......
Cl. 13, 14(Leg Length Difference (Angle))	-	200	....
Cl. 13, 14(Leg Length B (Angle))	-	200	........
Cl. 13, 14(Leg Length A (Angle))	-	200	........
Cl. 13, 14(Toe Radius R2)	-	200	....
Cl. 13, 14(Root Radius R1)	-	200	.....
Cl. 8, Table 2(Elongation)	-	200	....
Cl. 8, Table 2(Yield Stress)	-	200	...
Cl 16(Mass)	-	200	.....
Cl 13(Dimensions)	-	200	...
Cl 12(Freedom from Defects)	-	200	.......
Cl 11(Flattening Test)	-	200	.......
Cl 10(Impact Test)	-	200	...
Cl 9(Bend Test)	-	200	....
Cl 8(Tensile Test)	-	200	...
Cl 4(Grades)	-	200	......
Cl 4(Grades)	-	200	....
Cl 8(Tensile Test)	-	200	......
Cl 9(Bend Test)	-	200	...
Cl 10(Impact Test)	-	200	....
Cl 11(Flattening Test)	-	200	....
Cl 12(Freedom from Defects)	-	200	.....
Cl 13(Dimensions)	-	200	......
Cl 16(Mass)	-	200	.....
Cl. 13, 14(Out of Square (Angle))	-	200	.......
Cl 4(Grades)	-	200	.....
Cl 8(Tensile Test)	-	200	...
Cl 9(Bend Test)	-	200	...
Cl 10(Impact Test)	-	200	...
Cl 11(Flattening Test)	-	200	......
Cl 12(Freedom from Defects)	-	200	.......
Cl 13(Dimensions)	-	200	........
Cl 16(Mass)	-	200	......
Cl 4(Grades)	-	200	......
Cl 8(Tensile Test)	-	200	...
Cl 9(Bend Test)	-	200	........
Cl 10(Impact Test)	-	200	.........
Cl 11(Flattening Test)	-	200	.........
Cl 12(Freedom from Defects)	-	200	.
Cl 13(Dimensions)	-	200	........
Cl 16(Mass)	-	200	......
Clause 5.1, Table -1(WR-Fe 480 A, C )	-	200	....
Clause 5.1, Table -1(WR-Fe 480 A, Si)	-	200	...
Clause 5.1, Table -1(WR-Fe 480 A, Mn)	-	200	..
Clause 5.1, Table -1(WR-Fe 480 A, P )	-	200	......
Clause 5.1, Table -1(WR-Fe 480 A, S )	-	200	.....
Clause 5.1, Table -1(WR-Fe 480 A, Cr )	-	200	...........
Clause 5.1, Table -1(WR-Fe 480 A, Ni)	-	200	.......
Clause 5.1, Table -1(WR-Fe 480 A, Cu)	-	200	.........
Clause 5.1, Table -1(WR-Fe 480 B, C )	-	200	.........
Clause 5.1, Table -1(WR-Fe 480 B, Si)	-	200	....
Clause 5.1, Table -1(WR-Fe 480 B, Mn)	-	200	...........
Clause 5.1, Table -1(WR-Fe 480 B, P )	-	200	........
Clause 5.1, Table -1(WR-Fe 480 B, S )	-	200	.......
Clause 5.1, Table -1(WR-Fe 480 B, Cr )	-	200	......
Clause 5.1, Table -1(WR-Fe 480 B, Cu)	-	200	..........
Clause 5.1, Table -1(WR-Fe 480 B, V)	-	200	......
Clause 5.1, Table -1(WR-Fe 500, C)	-	200	.........
Clause 5.1, Table -1(WR-Fe 500, Si)	-	200	.
Clause 5.1, Table -1(WR-Fe 500, Mn)	-	200	............
Clause 5.1, Table -1(WR-Fe 500, P)	-	200	......
Clause 5.1, Table -1(WR-Fe 500, S)	-	200	..........
Clause 5.1, Table -1(WR-Fe 500, Cr)	-	200	..........
Clause 5.1, Table -1(WR-Fe 500, V)	-	200	............
Cl. 13, 14(Out of Square)	-	200	........
Cl. 13, 14(Square Size)	-	200	...........
Cl. 13, 14(Out of Round)	-	200	......
Cl. 13, 14(Diameter)	-	200	.....
Cl. 13, 14(Sweep)	-	200	........
Cl. 13, 14(Flateness of Web (Channel))	-	200	........
Cl. 13, 14(Flange out of square or Out of parallel (Channel))	-	200	........
Cl. 13, 14(Width of flange (Channel))	-	200	.......
Cl. 13, 14(Depth (Channel))	-	200	........
Cl. 13, 14(Off Centre of Web)	-	200	.........
Cl. 13, 14(Flange out of square (I beam))	-	200	...
Cl. 13, 14(Width of flange (I Beam))	-	200	....
Cl. 13, 14(Depth (I Beam))	-	200	.......
Cl. 13, 14(Mass (Plate))	-	200	...
Cl. 13, 14(Flange Slope)	-	200	.........
Cl. 13, 14(Web Thickness)	-	200	.......
Cl. 13, 14(Flange Thickness)	-	200	.......
Cl. 13, 14(Out of Square (Flat))	-	200	.........
Cl. 13, 14(Width )	-	200	.....
Cl. 13, 14(Thickness )	-	200	.......
Cl. 13, 14(Sectional Area )	-	200	....
Cl. 13, 14(Camber )	-	200	.........
Cl. 13, 14(Weight)	-	200	.....
Cl. 13, 14(Leg Length Difference (Angle))	-	200	...
Cl. 13, 14(Leg Length B (Angle))	-	200	...
Cl. 13, 14(Leg Length A (Angle))	-	200	..........
Cl. 13, 14(Toe Radius R2)	-	200	........
Cl. 13, 14(Root Radius R1)	-	200	.....
Cl. 8, Table 2(Elongation)	-	200	...
Cl. 8, Table 2(Yield Stress)	-	200	........
Cl 16(Mass)	-	200	....
Cl 13(Dimensions)	-	200	.......
Cl 12(Freedom from Defects)	-	200	.....
Cl 11(Flattening Test)	-	200	..........
Cl 10(Impact Test)	-	200	....
Cl 9(Bend Test)	-	200	.........
Cl 8(Tensile Test)	-	200	.......
Cl 4(Grades)	-	200	.....
Cl 4(Grades)	-	200	......
Cl 8(Tensile Test)	-	200	......
Cl 9(Bend Test)	-	200	.......
Cl 10(Impact Test)	-	200	........
Cl 11(Flattening Test)	-	200	.........
Cl 12(Freedom from Defects)	-	200	.....
Cl 13(Dimensions)	-	200	......
Cl 16(Mass)	-	200	.........
Cl. 13, 14(Out of Square (Angle))	-	200	.......
Cl 4(Grades)	-	200	.........
Cl 8(Tensile Test)	-	200	.........
Cl 9(Bend Test)	-	200	.......
Cl 10(Impact Test)	-	200	.........
Cl 11(Flattening Test)	-	200	.........
Cl 12(Freedom from Defects)	-	200	......
Cl 13(Dimensions)	-	200	........
Cl 16(Mass)	-	200	....
Cl 4(Grades)	-	200	.........
Cl 8(Tensile Test)	-	200	.......
Cl 9(Bend Test)	-	200	.........
Cl 10(Impact Test)	-	200	.
Cl 11(Flattening Test)	-	200	....
Cl 12(Freedom from Defects)	-	200	....
Cl 13(Dimensions)	-	200	.......
Cl 16(Mass)	-	200	.......
Clause 5.1, Table -1(WR-Fe 480 A, C )	-	200	..........
Clause 5.1, Table -1(WR-Fe 480 A, Si)	-	200	......
Clause 5.1, Table -1(WR-Fe 480 A, Mn)	-	200	.......
Clause 5.1, Table -1(WR-Fe 480 A, P )	-	200	..........
Clause 5.1, Table -1(WR-Fe 480 A, S )	-	200	.......
Clause 5.1, Table -1(WR-Fe 480 A, Cr )	-	200	........
Clause 5.1, Table -1(WR-Fe 480 A, Ni)	-	200	........
Clause 5.1, Table -1(WR-Fe 480 A, Cu)	-	200	...
Clause 5.1, Table -1(WR-Fe 480 B, C )	-	200	.......
Clause 5.1, Table -1(WR-Fe 480 B, Si)	-	200	.........
Clause 5.1, Table -1(WR-Fe 480 B, Mn)	-	200	......
Clause 5.1, Table -1(WR-Fe 480 B, P )	-	200	...
Clause 5.1, Table -1(WR-Fe 480 B, S )	-	200	.
Clause 5.1, Table -1(WR-Fe 480 B, Cr )	-	200	......
Clause 5.1, Table -1(WR-Fe 480 B, Cu)	-	200	....
Clause 5.1, Table -1(WR-Fe 480 B, V)	-	200	......
Clause 5.1, Table -1(WR-Fe 500, C)	-	200	.
Clause 5.1, Table -1(WR-Fe 500, Si)	-	200	.
Clause 5.1, Table -1(WR-Fe 500, Mn)	-	200	..
Clause 5.1, Table -1(WR-Fe 500, P)	-	200	....
Clause 5.1, Table -1(WR-Fe 500, S)	-	100	.....
Clause 5.1, Table -1(WR-Fe 500, Cr)	-	100	...
Clause 5.1, Table -1(WR-Fe 500, V)	-	100	......
Cl. 13, 14(Out of Square)	-	200	......
Cl. 13, 14(Square Size)	-	200	......
Cl. 13, 14(Out of Round)	-	200	.........
Cl. 13, 14(Diameter)	-	200	.......
Cl. 13, 14(Sweep)	-	200	......
Cl. 13, 14(Flateness of Web (Channel))	-	200	.....
Cl. 13, 14(Flange out of square or Out of parallel (Channel))	-	200	.......
Cl. 13, 14(Width of flange (Channel))	-	200	......
Cl. 13, 14(Depth (Channel))	-	200	..
Cl. 13, 14(Off Centre of Web)	-	200	...
Cl. 13, 14(Flange out of square (I beam))	-	200	...
Cl. 13, 14(Width of flange (I Beam))	-	200	..
Cl. 13, 14(Depth (I Beam))	-	200	........
Cl. 13, 14(Mass (Plate))	-	200	.....
Cl. 13, 14(Flange Slope)	-	200	......
Cl. 13, 14(Web Thickness)	-	200	......
Cl. 13, 14(Flange Thickness)	-	200	...
Cl. 13, 14(Out of Square (Flat))	-	200	..
Cl. 13, 14(Width )	-	200	....
Cl. 13, 14(Thickness )	-	200	......
Cl. 13, 14(Sectional Area )	-	200	..
Cl. 13, 14(Camber )	-	200	.....
Cl. 13, 14(Weight)	-	200	...
Cl. 13, 14(Leg Length Difference (Angle))	-	200	......
Cl. 13, 14(Leg Length B (Angle))	-	200	....
Cl. 13, 14(Leg Length A (Angle))	-	200	...
Cl. 13, 14(Toe Radius R2)	-	200	.
Cl. 13, 14(Root Radius R1)	-	200	......
Cl. 8, Table 2(Elongation)	-	200	........
Cl. 8, Table 2(Yield Stress)	-	200	......
Cl 16(Mass)	-	200	......
Cl 13(Dimensions)	-	200	.
Cl 12(Freedom from Defects)	-	200	..
Cl 11(Flattening Test)	-	200	...
Cl 10(Impact Test)	-	200	.......
Cl 9(Bend Test)	-	200	......
Cl 8(Tensile Test)	-	200	....
Cl 4(Grades)	-	200	.....
Cl 4(Grades)	-	200	.....
Cl 8(Tensile Test)	-	200	.....
Cl 9(Bend Test)	-	200	....
Cl 10(Impact Test)	-	200	......
Cl 11(Flattening Test)	-	200	....
Cl 12(Freedom from Defects)	-	200	..........
Cl 13(Dimensions)	-	200	.......
Cl 16(Mass)	-	200	......
Cl. 13, 14(Out of Square (Angle))	-	200	........
Cl 4(Grades)	-	200	.....
Cl 8(Tensile Test)	-	200	......
Cl 9(Bend Test)	-	100	......
Cl 10(Impact Test)	-	100	......
Cl 11(Flattening Test)	-	100	.....
Cl 12(Freedom from Defects)	-	100	.....
Cl 13(Dimensions)	-	100	......
Cl 16(Mass)	-	100	......
Cl 4(Grades)	-	100	........
Cl 8(Tensile Test)	-	100	.......
Cl 9(Bend Test)	-	100	.....
Cl 10(Impact Test)	-	100	......
Cl 11(Flattening Test)	-	100	......
Cl 12(Freedom from Defects)	-	100	......
Cl 13(Dimensions)	-	100	...
Cl 16(Mass)	-	100	......
Clause 5.1, Table -1(WR-Fe 480 A, C )	-	100	......
Clause 5.1, Table -1(WR-Fe 480 A, Si)	-	100	......
Clause 5.1, Table -1(WR-Fe 480 A, Mn)	-	100	.......
Clause 5.1, Table -1(WR-Fe 480 A, P )	-	100	......
Clause 5.1, Table -1(WR-Fe 480 A, S )	-	100	.......
Clause 5.1, Table -1(WR-Fe 480 A, Cr )	-	100	........
Clause 5.1, Table -1(WR-Fe 480 A, Ni)	-	100	...........
Clause 5.1, Table -1(WR-Fe 480 A, Cu)	-	100	......
Clause 5.1, Table -1(WR-Fe 480 B, C )	-	100	..........
Clause 5.1, Table -1(WR-Fe 480 B, Si)	-	100	......
Clause 5.1, Table -1(WR-Fe 480 B, Mn)	-	100	..........
Clause 5.1, Table -1(WR-Fe 480 B, P )	-	100	.......
Clause 5.1, Table -1(WR-Fe 480 B, S )	-	100	..........
Clause 5.1, Table -1(WR-Fe 480 B, Cr )	-	100	......
Clause 5.1, Table -1(WR-Fe 480 B, Cu)	-	100	.......
Clause 5.1, Table -1(WR-Fe 480 B, V)	-	100	........
Clause 5.1, Table -1(WR-Fe 500, C)	-	100	.......
Clause 5.1, Table -1(WR-Fe 500, Si)	-	100	.......
Clause 5.1, Table -1(WR-Fe 500, Mn)	-	100	........
Clause 5.1, Table -1(WR-Fe 500, P)	-	100	.......
Clause 5.1, Table -1(WR-Fe 500, S)	-	100	......
Clause 5.1, Table -1(WR-Fe 500, Cr)	-	100	........
Clause 5.1, Table -1(WR-Fe 500, V)	-	100	.........
Cl. 13, 14(Out of Square)	-	100	.......
Cl. 13, 14(Square Size)	-	100	........
Cl. 13, 14(Out of Round)	-	100	......
Cl. 13, 14(Diameter)	-	100	........
Cl. 13, 14(Sweep)	-	200	....
Cl. 13, 14(Flateness of Web (Channel))	-	200	.......
Cl. 13, 14(Flange out of square or Out of parallel (Channel))	-	200	.....
Cl. 13, 14(Width of flange (Channel))	-	200	......
Cl. 13, 14(Depth (Channel))	-	200	...........
Cl. 13, 14(Off Centre of Web)	-	200	......
Cl. 13, 14(Flange out of square (I beam))	-	200	......
Cl. 13, 14(Width of flange (I Beam))	-	100	.......
Cl. 13, 14(Depth (I Beam))	-	200	......
Cl. 13, 14(Mass (Plate))	-	200	.......
Cl. 13, 14(Flange Slope)	-	200	.......
Cl. 13, 14(Web Thickness)	-	200	.......
Cl. 13, 14(Flange Thickness)	-	200	.....
Cl. 13, 14(Out of Square (Flat))	-	200	......
Cl. 13, 14(Width )	-	200	........
Cl. 13, 14(Thickness )	-	200	.........
Cl. 13, 14(Sectional Area )	-	200	.......
Cl. 13, 14(Camber )	-	200	........
Cl. 13, 14(Weight)	-	200	.........
Cl. 13, 14(Leg Length Difference (Angle))	-	200	...........
Cl. 13, 14(Leg Length B (Angle))	-	200	......
Cl. 13, 14(Leg Length A (Angle))	-	200	......
Cl. 13, 14(Toe Radius R2)	-	200	......
Cl. 13, 14(Root Radius R1)	-	200	......
Cl. 8, Table 2(Elongation)	-	200	......
Cl. 8, Table 2(Yield Stress)	-	200	.....
Cl 16(Mass)	-	200	......
Cl 13(Dimensions)	-	200	.......
Cl 12(Freedom from Defects)	-	200	.......
Cl 11(Flattening Test)	-	200	......
Cl 10(Impact Test)	-	200	.....
Cl 9(Bend Test)	-	200	....
Cl 8(Tensile Test)	-	200	.........
Cl 4(Grades)	-	200	.......
Cl 4(Grades)	-	200	.......
Cl 8(Tensile Test)	-	200	.......
Cl 9(Bend Test)	-	200	........
Cl 10(Impact Test)	-	100	....
Cl 11(Flattening Test)	-	100	......
Cl 12(Freedom from Defects)	-	100	....
Cl 13(Dimensions)	-	100	........
Cl 16(Mass)	-	100	.....
Cl. 13, 14(Out of Square (Angle))	-	100	......

07 Sep, 2028

-
Included w.e.f. 15.10.2025

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number