| 3781 |
Khunti Smart Laboratory, Indian Oil Corporation Limited (IOCL)
| 9194614
| IS 15464 (2022) |
ANHYDROUS ETHANOL FOR USE AS BLENDING COMPONENT IN MOTOR GASOLINE SPECIFICATION First Revision |
- |
16690 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.3(Acidity) |
- |
400 |
|
- |
| 4.4-Table 1-ii)(Relative density at 15.6/15.6 °C, Max) |
- |
1130 |
|
- |
| 4.4-Table 1-iii)(Ethanol, percent, v/v, Min1)). (excluding denaturant)) |
- |
1340 |
|
- |
| 4.4-Table 1-iv)(Ethanol, percent, v/v, Min1). (excluding denaturant)) |
- |
1340 |
|
- |
| 4.4-Table 1-vii)(Residue on evaporation, percent by mass, Max.) |
- |
2070 |
|
- |
| 4.4-Table 1-viii)(Acidity (as CH3 COOH), mg/kg, Max.) |
- |
400 |
|
- |
| 4.4-Table 1-ix)(Alkalinity, mg/kg, Max.) |
- |
400 |
|
- |
| 4.4-Table 1-x)(Aldehyde (as CH3 CHO) content, mg/l, Max) |
- |
1900 |
|
- |
| 4.4-Table 1-xv)(Sulfur content, mg/kg, Max.) |
- |
4710 |
|
- |
| 4.4-Table 1-xvii)(Water content, percent v/v, Max.) |
- |
4160 |
|
- |
| 4.4-Table 1-xix)(Miscibility with water) |
- |
380 |
|
- |
| 4.4-Table 1-i)(Appearance) |
- |
200 |
|
- |
|
22 Dec, 2028 |
-
Exclusion: 4.1 (Description) 4.2 (Denaturant) 4.4-Table 1-v) (Higher saturated alcohols (C3-C5), percent, v/v, Max) 4.4-Table 1-vi) (Boiling point, °C, Min.) 4.4-Table 1-xi) (Electrical conductivity, µS/m, Max) 4.4-Table 1-xii) (Copper, mg/kg, Max.) 4.4-Table 1-xiii) (pHe) 4.4-Table 1-xiv) (Inorganic chloride, mg/kg, Max.)
4.4-Table 1-xvi) (Sulphate content, mg/kg Max.) 4.4-Table 1-xviii) (Hydrocarbons, percent v/v) 5.1 (Packing) 5.2 (Marking) 4.4-Table 1 iv (Methanol) |
| 3782 |
Khunti Smart Laboratory, Indian Oil Corporation Limited (IOCL)
| 9194614
| IS 1459 (2018) |
Kerosene - Specification (Fourth Revision) |
- |
10990 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.2-Table 1-i)(Appearance) |
- |
200 |
|
- |
| 4.2-Table 1-v)(Copper strip corrosion for 3 h at 50°C) |
- |
1130 |
|
- |
| 4.2-Table 1-vi)(Density at 15°C, kg/m3) |
- |
1130 |
|
- |
| 4.2-Table 1-vii)(Distillation
a)Percent recovered below200°C, percent (v/v), Min
b)Final boiling point, °C, Max
) |
- |
2650 |
|
- |
| 4.2-Table 1-viii)(Flash point ( Abel), °C, Min) |
- |
1900 |
|
- |
| 4.2-Table 1-ix)(Smoke Point4), mm, Min) |
- |
1130 |
|
- |
| 4.2-Table 1-x)(Total Sulphur Content, percent, m/m, Max) |
- |
2650 |
|
- |
| 4.2-Table 1-iv)(Colour
a)Saybolt (in cas of undyedKerosene)3), Min
b)Visual (in case of dyed Kerosene)) |
- |
200 |
|
- |
|
22 Dec, 2028 |
-
Scope restricted to dyed kerosene.
Exclusion: 4.2-Table 1-ii) (Acidity, inorganic) 4.2-Table 1-iii) (Burning quality2) a)Char Value, mg/kg of oil consumed, Max b)Bloom on glass Chimney) 5.1 (Packing) 5.2 (Marking) |
| 3783 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 863 (1988) |
Specification for cotton bandage cloth, non-sterilized (second revision) |
- |
2400 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Table 1 (Ends, ) |
- |
|
|
|
| Table 1 (Picks,) |
- |
|
|
|
| Table 1 (Mass, g/m²,) |
- |
|
|
|
| Table 1 (Length, m) |
- |
|
|
|
| Table 1 (Width, cm,) |
- |
|
|
|
|
- |
-
Mech: All tests except Yarn, Fiber identification, (Color fastness to light and sterility (optional)) |
| 3784 |
Indian Oil Corporation Ltd(IOCL) Bhubaneswar Terminal Laboratory
| 5192114
| IS 17021 (2018) |
E 20 fuel - Admixture of anhydrous ethanol and gasoline - As fuel for spark ignited engine powered vehicles - Specification |
- |
17689 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.2-Table 1-i)(Appearance) |
- |
200 |
|
(i) Testing Charges are in INR
(ii) This testing Charge is for FY 2025-26
(iii)Annual increment is 5%
(iv) Applicable GST is 18% |
| 4.2-Table 1-ii)(Colour) |
- |
200 |
|
i) Testing Charges are in INR
(ii) This testing Charge is for FY 2025-26
(iii)Annual increment is 5%
(iv) Applicable GST is 18% |
| 4.2-Table 1-iii)(Density at 15°C, kg/m3) |
- |
1130 |
|
i) Testing Charges are in INR
(ii) This testing Charge is for FY 2025-26
(iii)Annual increment is 5%
(iv) Applicable GST is 18% |
| 4.2-Table 1-iv)(Distillation
a) percent evaporated at 70 °C
(E70 °C), percent v/v
b) percent evaporated at 100 °C
(E100 °C), percent v/v
c) percent evaporated at 150 °C
(E150 °C ), percent v/v, Min
d) Final Boiling Point, °C, Max
e) Residue, percent by volume, Max) |
- |
2650 |
|
i) Testing Charges are in INR
(ii) This testing Charge is for FY 2025-26
(iii)Annual increment is 5%
(iv) Applicable GST is 18% |
| 4.2-Table 1-vii)(Gum content (Solvent washed), g/m3 , Max) |
- |
2070 |
|
i) Testing Charges are in INR
(ii) This testing Charge is for FY 2025-26
(iii)Annual increment is 5%
(iv) Applicable GST is 18% |
| 4.2-Table 1-viii)(Total Sulphur, mg/kg, Max) |
- |
4710 |
|
i) Testing Charges are in INR
(ii) This testing Charge is for FY 2025-26
(iii)Annual increment is 5%
(iv) Applicable GST is 18% |
| 4.2-Table 1-xiii)(Copper strip corrosion (3 h at 50 °C), Max) |
- |
1130 |
|
i) Testing Charges are in INR
(ii) This testing Charge is for FY 2025-26
(iii)Annual increment is 5%
(iv) Applicable GST is 18% |
| 4.2-Table 1-xx)(Ethanol content6), percent, v/v) |
- |
690 |
|
i) Testing Charges are in INR
(ii) This testing Charge is for FY 2025-26
(iii)Annual increment is 5%
(iv) Applicable GST is 18% |
| 4.3(Ethanol Content) |
- |
690 |
|
i) Testing Charges are in INR
(ii) This testing Charge is for FY 2025-26
(iii)Annual increment is 5%
(iv) Applicable GST is 18% |
| 4.2-Table 1-xxiii (Amendment No.3)(Water content) |
- |
4160 |
|
i) Testing Charges are in INR
(ii) This testing Charge is for FY 2025-26
(iii)Annual increment is 5%
(iv) Applicable GST is 18% |
|
03 Dec, 2028 |
-
4.1 (Description)
4.2-Table 1-ix) (Lead Content (as Pb), g/l, Max)
4.2-Table 1-v) (Research Octane Number (RON), Min)
4.2-Table 1-vi) (Motor Octane Number (MON), Min)
4.2-Table 1-x) (Reid Vapour pressure at 38°C, kPa, Max)
4.2-Table 1-xi) (Vapour Lock Index (VLI), Max a) Summer2) b) Other Months)
4.2-Table 1-xii) (Benzene content, percent by volume, Max)
4.2-Table 1-xiv) (Water tolerance of gasoline-alcohol blends, temperature for phase separation, °C, Max a) other months b) Winter3))
4.2-Table 1-xix) (Oxygen content, percent by mass, Max)
4.2-Table 1-xv) (Engine intake system cleanliness)
4.2-Table 1-xvi) (Olefin content, percent by volume, Max)
4.2-Table 1-xvii) (Oxidation stability, minutes, Min)
4.2-Table 1-xviii) (Aromatic content5), percent by volume, Max)
4.2-Table 1-xxi) (Oxygenates percent by volume, Max a) Ethers containing 5 or more “C” atoms per molecules such as MTBE, ETBE or TAME b) Any other oxygenates)
4.2-Table 1-xxii) (Motor Gasoline Content, percent, v/v)
4.4 (Organic Oxygenates)
4.5 (Phosphorous)
6.1 (Packing)
6.2 (Marking) |
| 3785 |
SWASTIK ELECTRONICS TESTING CENTRE (OPC) PVT. LTD., GHAZIABAD
| 8163826
| IS 16270 (2023) |
Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test |
-- |
400000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-4.1(Photovoltaic Energy System) |
- |
0 |
|
N/A |
| Cl-4.2(Secondary Cells and Batteries) |
- |
0 |
|
N/A |
| Cl-4.3(General Operating Conditions) |
- |
0 |
|
N/A |
| Cl-4.3.8(Storage) |
- |
0 |
|
N/A |
| Cl-4.3.9(Operating Temperature) |
- |
0 |
|
N/A |
| Cl-5.1(Mechanical Endurance) |
- |
0 |
|
N/A |
| Cl-5.2(Charge Efficiency) |
- |
0 |
|
N/A |
| Cl-5.3(Deep Discharge Protection) |
- |
0 |
|
N/A |
| Cl-5.4(Marking) |
- |
1500 |
|
N/A |
| Cl-5.5(Safety) |
- |
0 |
|
N/A |
| Cl-5.6(Documentation) |
- |
0 |
|
N/A |
| Cl-6(Functional characteristice) |
- |
0 |
|
N/A |
| Cl-7(General test conditions) |
- |
0 |
|
N/A |
| Cl-8.1(Capacity Test) |
- |
50000 |
|
N/A |
| Cl-8.2(Endurance Test) |
- |
80000 |
|
N/A |
| Cl-8.3(Charge Retention Test) |
- |
70000 |
|
N/A |
| Cl-8.4(Cycle Endurance in Photovoltaic Application (Extreme Conditions)) |
- |
140000 |
|
N/A |
| Cl-8.5(Sulphation Test (Applicable for Lead Acid Batteries only)) |
- |
28500 |
|
N/A |
| Cl-8.6(Water Loss Test (Valid for Flooded Lead Acid Batteries only)) |
- |
25000 |
|
N/A |
| Cl-9.1(Type Tests) |
- |
0 |
|
N/A |
| Cl-9.2(Acceptance Test) |
- |
0 |
|
N/A |
| 4.3.7.1(Specific gravity) |
- |
5000 |
|
N/A |
|
15 May, 2028 |
-
Included w.e.f 13.11.2025 |
| 3786 |
Indian Oil Corporation Ltd(IOCL) Bhubaneswar Terminal Laboratory
| 5192114
| IS 2796 (2017) |
Motor gasoline - Specification (Sixth Revision) |
- |
12780 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (i)(Appearance) |
- |
200 |
|
(i)Testing Charges in INR
(ii)This testing charge is for FY: 2025-26.
(iii)Annual increment is 5%
(iv) Applicable GST is 18% |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ii), a)("Colour:
MG 91") |
- |
200 |
|
(i)Testing Charges in INR
(ii)This testing charge is for FY: 2025-26.
(iii)Annual increment is 5%
(iv) Applicable GST is 18% |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iii)(Density at 15°C, kg/m³) |
- |
1130 |
|
(i)Testing Charges in INR
(ii)This testing charge is for FY: 2025-26.
(iii)Annual increment is 5%
(iv) Applicable GST is 18% |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (a)(percent evaporated at 70°C (E 70°C), percent v/v: Motor gasoline) |
- |
2650 |
|
(i)Testing Charges in INR
(ii)This testing charge is for FY: 2025-26.
(iii)Annual increment is 5%
(iv) Applicable GST is 18% |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (b)(percent evaporated at 100°C (E 100 °C), percent v/v) |
- |
2650 |
|
(i)Testing Charges in INR
(ii)This testing charge is for FY: 2025-26.
(iii)Annual increment is 5%
(iv) Applicable GST is 18% |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (c)(percent evaporated at 150°C (E 150 °C), percent v/v, Min) |
- |
2650 |
|
(i)Testing Charges in INR
(ii)This testing charge is for FY: 2025-26.
(iii)Annual increment is 5%
(iv) Applicable GST is 18% |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (d)(Final boiling point, °C, Max) |
- |
2650 |
|
(i)Testing Charges in INR
(ii)This testing charge is for FY: 2025-26.
(iii)Annual increment is 5%
(iv) Applicable GST is 18% |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (e)(Residue, percent by volume, Max) |
- |
2650 |
|
(i)Testing Charges in INR
(ii)This testing charge is for FY: 2025-26.
(iii)Annual increment is 5%
(iv) Applicable GST is 18% |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (vii)(Gum content (Solvent washed), g/m3, Max) |
- |
2070 |
|
(i)Testing Charges in INR
(ii)This testing charge is for FY: 2025-26.
(iii)Annual increment is 5%
(iv) Applicable GST is 18% |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (viii)(Total sulphur, mg/kg, Max) |
- |
4710 |
|
(i)Testing Charges in INR
(ii)This testing charge is for FY: 2025-26.
(iii)Annual increment is 5%
(iv) Applicable GST is 18% |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xiii)(Copper strip corrosion, for 3 h at 50°C, Max) |
- |
1130 |
|
(i)Testing Charges in INR
(ii)This testing charge is for FY: 2025-26.
(iii)Annual increment is 5%
(iv) Applicable GST is 18% |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xx)(Ethanol content, percent by volume: a) Motor gasoline) |
- |
690 |
|
(i)Testing Charges in INR
(ii)This testing charge is for FY: 2025-26.
(iii)Annual increment is 5%
(iv) Applicable GST is 18% |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xx)(Ethanol content, percent by volume: a):- E10) |
- |
690 |
|
(i)Testing Charges in INR
(ii)This testing charge is for FY: 2025-26.
(iii)Annual increment is 5%
(iv) Applicable GST is 18% |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ii), b)("Colour:
MG 95") |
- |
200 |
|
(i)Testing Charges in INR
(ii)This testing charge is for FY: 2025-26.
(iii)Annual increment is 5%
(iv) Applicable GST is 18% |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (a)(percent evaporated at 70°C (E 70°C), percent v/v: E10) |
- |
2650 |
|
(i)Testing Charges in INR
(ii)This testing charge is for FY: 2025-26.
(iii)Annual increment is 5%
(iv) Applicable GST is 18% |
|
03 Dec, 2028 |
-
Cl-4.1 (General- Requirements)
Cl-4.1.2 (Antioxidants)
Cl-4.1.3 (Metal Deactivators)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ix) (Lead content (as Pb ), g/l, Max)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ixi) (Oxygen content, percent by mass, Max)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (v) (a) (Research octane number (RON), Min: MG 91)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (v) (b) (Research octane number (RON), Min: MG 95)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (vi) (a) (Motor octane number (MON),Min: MG 91)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (vi) (b) (Motor octane number (MON),Min: MG 95)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (x) (a) (Reid vapour pressure (RVP) at 38°C, kPa , Max: MG(without ethanol))
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (x) (b) (Reid vapour pressure (RVP) at 38°C, kPa , Max: Ethanol blended MG)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xi) (a) (Vapour lock index (VLI),Max :- MG (without ethanol))
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xi) (b) (Vapour lock index (VLI),Max :- MG (with 5 percent v/v ethanol))
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xi) (c) (Vapour lock index (VLI),Max :- E10)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xii) (Benzene content, percent by volume, Max)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xiv) (a) (Water tolerance of motor gasoline-alcohol blends, temperature for phase separation:- Winter, °C, Max)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xiv) (b) (Water tolerance of motor gasoline-alcohol blends, temperature for phase separation:- Other months, °C, Max)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xv) (Engine intake system cleanliness)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xvi) (a) (Olefin content, percent by volume, Max: MG 91)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xvi) (b) (Olefin content, percent by volume, Max :MG 95)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xvii) (Oxidation stability, minutes, Min)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xviii) (Aromatics content, percent by volume, Max)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (XXI) (Oxygenates percent by volume, Max)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (XXI) (Oxygenates percent by volume, Max:- Ethers containing 5 or more ‘C’ atoms per molecules such as MTBE, ETBE or TAME)
Cl-4.1.5 (Motor gasoline multifunctional additives (MFA),)
Cl-4.2.1 (Organic Oxygenates- Permitted Components)
Cl-4.3 (Other Requirements)
Cl-5.2 (Markeing) |
| 3787 |
Perfect International Testing Lab
| 8187826
| IS 302 : Part 2 : Sec 46 (1993) |
Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 46 electric steam cookers |
-- |
24000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4(General) |
- |
250 |
|
N/A |
| 5(Rating) |
- |
500 |
|
N/A |
| 6(Classification) |
- |
250 |
|
N/A |
| 7(Marking) |
- |
1000 |
|
N/A |
| 8("8 PROTECTION AGAINST ELECTRIC
SHOCK ") |
- |
1000 |
|
N/A |
| 9("STARTING OF MOTOR-OPERATING
APPLIANCES ") |
- |
0 |
|
N/A |
| 10(INPUT AND CURRENT) |
- |
1000 |
|
N/A |
| 11(TEMPERATURE RISE) |
- |
1000 |
|
N/A |
| 12("OPERATION UNDER OVERLOAD
CONDITIONS OF APPLIANCES WITH
HEATING ELEMENTS") |
- |
0 |
|
N/A |
| 13(" ELECTRICAL INSULATION AND LEKAGE
CURRENT AT OPERATING TEMPERATURE ") |
- |
1000 |
|
N/A |
| 14("RADIO AND TELEVISION
INTERFERENCE SUPPRESSION") |
- |
1000 |
|
N/A |
| 15(MOISTURE RESISTANCE) |
- |
1000 |
|
N/A |
| 16("INSULATION RESlSTANCE AND
specified in 16.2.
ELECTRIC SHOCK STRENGTH ( AFTER
HUMIDITY TREATMENT )") |
- |
1000 |
|
N/A |
| 17(OVERLOAD PROTECTION) |
- |
1000 |
|
N/A |
| 19(ABNORMAL OPERATION) |
- |
1000 |
|
N/A |
| 19.11.4.1(Electrostatic discharges) |
- |
1000 |
|
N/A |
| 19.11.4.2(Radiated fields) |
- |
0 |
|
N/A |
| 19.11.4.3(Fast transient bursts) |
- |
0 |
|
N/A |
| 19.11.4.4(Surge immunity test) |
- |
1000 |
|
N/A |
| 19.11.4.5(Immunity to conducted discharges) |
- |
0 |
|
N/A |
| 19.11.4.6(Class 3 Voltage dips and interruptions) |
- |
0 |
|
N/A |
| 19.11.4.7(Harmonics) |
- |
0 |
|
N/A |
| 20("STABILITY AND MECHANICAL
HAZARDS") |
- |
1000 |
|
N/A |
| 21(MECHANICAL STRENGTH) |
- |
500 |
|
N/A |
| 21(MECHANICAL STRENGTH) |
- |
500 |
|
N/A |
| 22(CONSTRUCTION) |
- |
500 |
|
N/A |
| 22(CONSTRUCTION) |
- |
500 |
|
N/A |
| 23(INTERNAL WIRING) |
- |
1000 |
|
N/A |
| 24(COMPONENTS) |
- |
1000 |
|
N/A |
| 25("SUPPLY CONNECTION AND EXTERNAL
FLEXIBLE CABLES AND CORDS ") |
- |
1000 |
|
N/A |
| 26("TERMINALS FOR EXTERNAL
CONDUCTORS") |
- |
1000 |
|
N/A |
| 27(PROVISION FOR EARTHING) |
- |
1000 |
|
N/A |
| 28(SCREWS AND CONNECTIONS) |
- |
1000 |
|
N/A |
| 30("RESISTANCE TO HEAT, FIRE AND
TRACKING ") |
- |
1000 |
|
N/A |
| 31(RESISTANCE TO RUSTING) |
- |
500 |
|
N/A |
| 31(RESISTANCE TO RUSTING) |
- |
500 |
|
- |
| 32(RADIATION HAZARDS) |
- |
0 |
|
N/A |
| 19.11.4.1(Electrostatic discharges) |
- |
0 |
|
N/A |
| 19.11.4.2(Radiated fields) |
- |
0 |
|
N/A |
| 19.11.4.3(Fast transient bursts) |
- |
0 |
|
N/A |
| 19.11.4.2(Radiated fields) |
- |
0 |
|
N/A |
| 19.11.4.4(Surge immunity test) |
- |
0 |
|
N/A |
| 19.11.4.5(Immunity to conducted discharges) |
- |
0 |
|
N/A |
| 19.11.4.6(Class 3 Voltage dips and interruptions) |
- |
0 |
|
N/A |
| 19.11.4.7(Harmonics) |
- |
0 |
|
N/A |
| 20("STABILITY AND MECHANICAL
HAZARDS") |
- |
0 |
|
N/A |
| 21(MECHANICAL STRENGTH) |
- |
0 |
|
N/A |
| 22(CONSTRUCTION) |
- |
0 |
|
N/A |
| 23(INTERNAL WIRING) |
- |
0 |
|
N/A |
| 24(COMPONENTS) |
- |
0 |
|
N/A |
| 25("SUPPLY CONNECTION AND EXTERNAL
FLEXIBLE CABLES AND CORDS ") |
- |
0 |
|
N/A |
| 26("TERMINALS FOR EXTERNAL
CONDUCTORS") |
- |
0 |
|
N/A |
| 27(PROVISION FOR EARTHING) |
- |
0 |
|
N/A |
| 28(SCREWS AND CONNECTIONS) |
- |
0 |
|
N/A |
| 30("RESISTANCE TO HEAT, FIRE AND
TRACKING ") |
- |
0 |
|
N/A |
| 31(RESISTANCE TO RUSTING) |
- |
0 |
|
N/A |
| 32(RADIATION HAZARDS) |
- |
0 |
|
N/A |
| 4(General) |
- |
0 |
|
N/A |
| 5(Rating) |
- |
0 |
|
N/A |
| 6(Classification) |
- |
0 |
|
N/A |
| 7(Marking) |
- |
0 |
|
N/A |
| 8("8 PROTECTION AGAINST ELECTRIC
SHOCK ") |
- |
0 |
|
N/A |
| 9("STARTING OF MOTOR-OPERATING
APPLIANCES ") |
- |
0 |
|
N/A |
| 10(INPUT AND CURRENT) |
- |
0 |
|
N/A |
| 11(TEMPERATURE RISE) |
- |
0 |
|
N/A |
| 12("OPERATION UNDER OVERLOAD
CONDITIONS OF APPLIANCES WITH
HEATING ELEMENTS") |
- |
0 |
|
N/A |
| 13(" ELECTRICAL INSULATION AND LEKAGE
CURRENT AT OPERATING TEMPERATURE ") |
- |
0 |
|
N/A |
| 14("RADIO AND TELEVISION
INTERFERENCE SUPPRESSION") |
- |
0 |
|
N/A |
| 15(MOISTURE RESISTANCE) |
- |
0 |
|
N/A |
| 16("INSULATION RESlSTANCE AND
specified in 16.2.
ELECTRIC SHOCK STRENGTH ( AFTER
HUMIDITY TREATMENT )") |
- |
0 |
|
N/A |
| 17(OVERLOAD PROTECTION) |
- |
0 |
|
N/A |
| 19(ABNORMAL OPERATION) |
- |
0 |
|
N/A |
| 19.11.4.1(Electrostatic discharges) |
- |
0 |
|
N/A |
| 19.11.4.2(Radiated fields) |
- |
0 |
|
N/A |
| 19.11.4.3(Fast transient bursts) |
- |
0 |
|
N/A |
| 19.11.4.4(Surge immunity test) |
- |
0 |
|
N/A |
| 19.11.4.5(Immunity to conducted discharges) |
- |
0 |
|
N/A |
| 19.11.4.6(Class 3 Voltage dips and interruptions) |
- |
0 |
|
N/A |
| 19.11.4.7(Harmonics) |
- |
0 |
|
N/A |
| 20("STABILITY AND MECHANICAL
HAZARDS") |
- |
0 |
|
N/A |
| 21(MECHANICAL STRENGTH) |
- |
0 |
|
N/A |
| 21(MECHANICAL STRENGTH) |
- |
0 |
|
N/A |
| 22(CONSTRUCTION) |
- |
0 |
|
N/A |
| 22(CONSTRUCTION) |
- |
0 |
|
N/A |
| 23(INTERNAL WIRING) |
- |
0 |
|
N/A |
| 24(COMPONENTS) |
- |
0 |
|
N/A |
| 25("SUPPLY CONNECTION AND EXTERNAL
FLEXIBLE CABLES AND CORDS ") |
- |
0 |
|
N/A |
| 26("TERMINALS FOR EXTERNAL
CONDUCTORS") |
- |
0 |
|
N/A |
| 27(PROVISION FOR EARTHING) |
- |
0 |
|
N/A |
| 28(SCREWS AND CONNECTIONS) |
- |
0 |
|
N/A |
| 30("RESISTANCE TO HEAT, FIRE AND
TRACKING ") |
- |
0 |
|
N/A |
| 31(RESISTANCE TO RUSTING) |
- |
0 |
|
N/A |
| 31(RESISTANCE TO RUSTING) |
- |
0 |
|
N/A |
| 32(RADIATION HAZARDS) |
- |
0 |
|
N/A |
| 19.11.4.1(Electrostatic discharges) |
- |
0 |
|
N/A |
| 19.11.4.2(Radiated fields) |
- |
0 |
|
N/A |
| 19.11.4.3(Fast transient bursts) |
- |
0 |
|
N/A |
| 19.11.4.2(Radiated fields) |
- |
0 |
|
N/A |
| 19.11.4.4(Surge immunity test) |
- |
0 |
|
N/A |
| 19.11.4.5(Immunity to conducted discharges) |
- |
0 |
|
N/A |
| 19.11.4.6(Class 3 Voltage dips and interruptions) |
- |
0 |
|
N/A |
| 19.11.4.7(Harmonics) |
- |
0 |
|
N/A |
| 20("STABILITY AND MECHANICAL
HAZARDS") |
- |
0 |
|
N/A |
| 21(MECHANICAL STRENGTH) |
- |
0 |
|
N/A |
| 22(CONSTRUCTION) |
- |
0 |
|
N/A |
| 23(INTERNAL WIRING) |
- |
0 |
|
N/A |
| 24(COMPONENTS) |
- |
0 |
|
N/A |
| 25("SUPPLY CONNECTION AND EXTERNAL
FLEXIBLE CABLES AND CORDS ") |
- |
0 |
|
N/A |
| 26("TERMINALS FOR EXTERNAL
CONDUCTORS") |
- |
0 |
|
N/A |
| 27(PROVISION FOR EARTHING) |
- |
0 |
|
N/A |
| 28(SCREWS AND CONNECTIONS) |
- |
0 |
|
N/A |
| 30("RESISTANCE TO HEAT, FIRE AND
TRACKING ") |
- |
0 |
|
N/A |
| 31(RESISTANCE TO RUSTING) |
- |
0 |
|
N/A |
| 32(RADIATION HAZARDS) |
- |
0 |
|
N/A |
| 4(General) |
- |
- |
|
- |
| 5(Rating) |
- |
- |
|
- |
| 6(Classification) |
- |
- |
|
- |
| 7(Marking) |
- |
- |
|
- |
| 8("8 PROTECTION AGAINST ELECTRIC
SHOCK ") |
- |
- |
|
- |
| 9("STARTING OF MOTOR-OPERATING
APPLIANCES ") |
- |
- |
|
- |
| 10(INPUT AND CURRENT) |
- |
- |
|
- |
| 11(TEMPERATURE RISE) |
- |
- |
|
- |
| 12("OPERATION UNDER OVERLOAD
CONDITIONS OF APPLIANCES WITH
HEATING ELEMENTS") |
- |
- |
|
- |
| 13(" ELECTRICAL INSULATION AND LEKAGE
CURRENT AT OPERATING TEMPERATURE ") |
- |
- |
|
- |
| 14("RADIO AND TELEVISION
INTERFERENCE SUPPRESSION") |
- |
- |
|
- |
| 15(MOISTURE RESISTANCE) |
- |
- |
|
- |
| 16("INSULATION RESlSTANCE AND
specified in 16.2.
ELECTRIC SHOCK STRENGTH ( AFTER
HUMIDITY TREATMENT )") |
- |
- |
|
- |
| 17(OVERLOAD PROTECTION) |
- |
- |
|
- |
| 19(ABNORMAL OPERATION) |
- |
- |
|
- |
| 19.11.4.1(Electrostatic discharges) |
- |
- |
|
- |
| 19.11.4.2(Radiated fields) |
- |
- |
|
- |
| 19.11.4.3(Fast transient bursts) |
- |
- |
|
- |
| 19.11.4.4(Surge immunity test) |
- |
- |
|
- |
| 19.11.4.5(Immunity to conducted discharges) |
- |
- |
|
- |
| 19.11.4.6(Class 3 Voltage dips and interruptions) |
- |
- |
|
- |
| 19.11.4.7(Harmonics) |
- |
- |
|
- |
| 20("STABILITY AND MECHANICAL
HAZARDS") |
- |
- |
|
- |
| 21(MECHANICAL STRENGTH) |
- |
- |
|
- |
| 21(MECHANICAL STRENGTH) |
- |
- |
|
- |
| 22(CONSTRUCTION) |
- |
- |
|
- |
| 22(CONSTRUCTION) |
- |
- |
|
- |
| 23(INTERNAL WIRING) |
- |
- |
|
- |
| 24(COMPONENTS) |
- |
- |
|
- |
| 25("SUPPLY CONNECTION AND EXTERNAL
FLEXIBLE CABLES AND CORDS ") |
- |
- |
|
- |
| 26("TERMINALS FOR EXTERNAL
CONDUCTORS") |
- |
- |
|
- |
| 27(PROVISION FOR EARTHING) |
- |
- |
|
- |
| 28(SCREWS AND CONNECTIONS) |
- |
- |
|
- |
| 30("RESISTANCE TO HEAT, FIRE AND
TRACKING ") |
- |
- |
|
- |
| 31(RESISTANCE TO RUSTING) |
- |
- |
|
- |
| 31(RESISTANCE TO RUSTING) |
- |
- |
|
- |
| 32(RADIATION HAZARDS) |
- |
- |
|
- |
| 19.11.4.1(Electrostatic discharges) |
- |
- |
|
- |
| 19.11.4.2(Radiated fields) |
- |
- |
|
- |
| 19.11.4.3(Fast transient bursts) |
- |
- |
|
- |
| 19.11.4.2(Radiated fields) |
- |
- |
|
- |
| 19.11.4.4(Surge immunity test) |
- |
- |
|
- |
| 19.11.4.5(Immunity to conducted discharges) |
- |
- |
|
- |
| 19.11.4.6(Class 3 Voltage dips and interruptions) |
- |
- |
|
- |
| 19.11.4.7(Harmonics) |
- |
- |
|
- |
| 20("STABILITY AND MECHANICAL
HAZARDS") |
- |
- |
|
- |
| 21(MECHANICAL STRENGTH) |
- |
- |
|
- |
| 22(CONSTRUCTION) |
- |
- |
|
- |
| 23(INTERNAL WIRING) |
- |
- |
|
- |
| 24(COMPONENTS) |
- |
- |
|
- |
| 25("SUPPLY CONNECTION AND EXTERNAL
FLEXIBLE CABLES AND CORDS ") |
- |
- |
|
- |
| 26("TERMINALS FOR EXTERNAL
CONDUCTORS") |
- |
- |
|
- |
| 27(PROVISION FOR EARTHING) |
- |
- |
|
- |
| 28(SCREWS AND CONNECTIONS) |
- |
- |
|
- |
| 30("RESISTANCE TO HEAT, FIRE AND
TRACKING ") |
- |
- |
|
- |
| 31(RESISTANCE TO RUSTING) |
- |
- |
|
- |
| 32(RADIATION HAZARDS) |
- |
- |
|
- |
|
02 Sep, 2028 |
-
Included w.e.f 19.12.2025
"32 (RADIATION HAZARDS)
Cl-19.11.4.2 (Radiated Fields)
Cl-19.11.4.3 (Fast transient bursts)
Cl-19.11.4.5 (Immunity to conducted discharge)
Cl-19.11.4.6 (Voltage dips and interruptions)
Cl-19.11.4.7 (Harmonics)
24 (COMPONENTS)" |
| 3788 |
Atharva Laboratories Pvt. Ltd. (D115A), Noida (8134206)
| 8134206
| IS 12361 (2023) |
Partially Hydrogenated Rice Bran Fatty Acids - Specification (first revision of IS 12361) |
- |
13000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.2(Description) |
- |
300 |
|
- |
| 3.3 Table 1 (i)(Moisture) |
- |
1000 |
|
- |
| 3.3 Table 1 (ii)(Saponification value) |
- |
1200 |
|
- |
| 3.3 Table 1 (iii)(Acid value shall not differfrom saponification value) |
- |
1500 |
|
- |
| 3.3 Table 1 (iv)(Iodine Value) |
- |
1500 |
|
- |
| 3.3 Table 1 (v)(Mineral Acidity) |
- |
1500 |
|
- |
| 3.3 Table 1 (vi)(Ash) |
- |
1500 |
|
- |
| 3.3 Table 1 (vii)(Unsaponifiable matter) |
- |
1500 |
|
- |
| 3.3 Table 1 (viii)(Titre) |
- |
1500 |
|
- |
| 3.3 Table 1 (ix)(Colour in a 1-in cell on the Lovibond scale expressed as Y + 5R) |
- |
1500 |
|
- |
|
21 Jul, 2028 |
-
Included w.e.f. 12.11.2025 |
| 3789 |
Khunti Smart Laboratory, Indian Oil Corporation Limited (IOCL)
| 9194614
| IS 1460 (2025) |
Automotive Diesel Fuel - Specification (seventh revision) |
- |
26860 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-3.1.4 , 3.2, Table-1 (i)(Appearance) |
- |
200 |
|
- |
| Cl-3.1.4 , 3.2, Table-1 (ii) C(Total Acid Number (TAN), mg of KOH/g, Max) |
- |
1140 |
|
- |
| Cl-3.1.4 , 3.2, Table-1 (vi)(Cetane index, Min) |
- |
3770 |
|
- |
| Cl-3.1.4 , 3.2, Table-1 (viii)(Copper strip corrosion for 3 h at 50 °C, Max) |
- |
1130 |
|
- |
| Cl-3.1.4 , 3.2, Table-1 (ix)(Distillation, 95 percent v/v recovery, °C, Max) |
- |
2650 |
|
- |
| Cl-3.1.4 , 3.2, Table-1 (x)(Flash point, Abel4, °C, Min) |
- |
1900 |
|
- |
| Cl-3.1.4 , 3.2, Table-1 (xi)(Kinematic viscosity, mm2/s, at 40 °C) |
- |
2270 |
|
- |
| Cl-3.1.4 , 3.2, Table-1 (xiii)(Density at 15 °C, kg/m3) |
- |
1130 |
|
- |
| Cl-3.1.4 , 3.2, Table-1 (xiv)(Total sulphur, mg/kg, Max) |
- |
4710 |
|
- |
| Cl-3.1.4 , 3.2, Table-1 (xvi) (a)(Cold Filter Plugging Point (CFPP)3, °C, Max: Winter) |
- |
1900 |
|
- |
| Cl-3.1.4 , 3.2, Table-1 (xvi) (b)(Cold Filter Plugging Point (CFPP)3, °C, Max: Summer) |
- |
1900 |
|
- |
| Cl-3.1.4 , 3.2, Table-1 (vii) (a)(Pour point3, °C, Max: Winter) |
- |
1900 |
|
- |
| Cl-3.1.4 , 3.2, Table-1 (vii) (b)(Pour point3, °C, Max: Summer) |
- |
1900 |
|
- |
| Cl-3.1.4 , 3.2, Table-1 (xv)(Water content, mg/kg, Max) |
- |
4160 |
|
- |
|
22 Dec, 2028 |
-
Exclusion: Cl-3.1.4 , 3.2, Table-1 (iii) (Ash, percent by mass, Max) Cl-3.1.4 , 3.2, Table-1 (iv) (Carbon residue, on 10 percent residue1, percent by mass, Max) Cl-3.1.4 , 3.2, Table-1 (v) (Cetane number, Min) Cl-3.1.4 , 3.2, Table-1 (xii) (Total contamination, mg/kg, Max) Cl-3.1.4 , 3.2, Table-1 (xvii) (Oxidation stability6, g/m3, Max) Cl-3.1.4 , 3.2, Table-1 (xvii) (Oxidation stability6, minutes, Min) Cl-3.1.4 , 3.2, Table-1 (xviii) (Oxidation stability (for diesel fuel having FAME content of above 2 percent v/v), hours, Min) Cl-3.1.4 , 3.2, Table-1 (xviii) (Oxidation stability (for diesel fuel having FAME content of above 2 percent v/v), minutes, Min) Cl-3.1.4 , 3.2, Table-1 (xix) (Polycyclic Aromatic Hydrocarbon (PAH), percent by mass, Max) Cl-3.1.4 , 3.2, Table-1 (xx) (Lubricity, wear scar diameter (wsd) at 60 ºC, μm, Max) Cl-3.1.4 , 3.2, Table-1 (xxi) (FAME content7, percent v/v, Max) Cl-5.2 (Marking) Cl-3.1 (General- Requirements) Cl-3.2 (Composition) |
| 3790 |
INDIAN TEST HOUSE PRIVATE LIMITED, MURADNAGAR
| 8183336
| IS 12823 (2025) |
Prelaminated Medium Density Particle Boards from Wood and other Lignocellulosic Material Specification (Second Revision) |
REG-Grade A,TYPE 1, TYPE 2, TYPE 3, TYPE 4, REG GRADE B, TYPE 1 ,TYPE2,TYPE3, TYPE 4,MR GRADE , TYPE 1, TYPE 2,TYPE3, TYPE4, HMR GRADE TYPE 1, TYPE2, TYPE3 ,TYPE 4, |
11500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| As per Clause 5(Material - IS 3087) |
- |
100 |
|
- |
| As per Clause 8 Table 2(Length -IS 2380 (Part 2)) |
- |
100 |
|
- |
| As per Clause 8 Table 2(Width - IS 2380 (Part 2)) |
- |
100 |
|
- |
| As per Clause 8 Table 2(Thickness - IS 2380 (Part 2)) |
- |
100 |
|
- |
| As per Clause 8 Table 2(Squareness, Max -IS 2380 (Part 2)) |
- |
100 |
|
- |
| As per Clause 8 Table 2(Edge Straighness, Max - IS 2380 (Part 2)) |
- |
100 |
|
- |
| As per Clause 9.1 Table 3(Density -IS 2380 (Part 3)) |
- |
1000 |
|
- |
| As per Clause 9.1 Table 3(Variation from mean density, --IS 2380 (Part 3)) |
- |
1000 |
|
- |
| As per Clause 9.1 Table 3(Moisture Content -IS 2380 (Part 3)) |
- |
500 |
|
- |
| As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of rupture (MoR), Min.-IS 2380 (Part 4)) |
- |
1000 |
|
- |
| As per Clause 9.1 Table 4, Table 6, Table 7(Modulus of elasticity (MoE), Min. -(IS 2380 (Part 4)) |
- |
1000 |
|
- |
| As per Clause 9.1 Table 4, Table 5, Table 6, Table7(Internal bond strength, Min. - IS 2380 (Part 5)) |
- |
500 |
|
- |
| As per Clause 9.1 Table 6, Table 7(24 h thickness swelling (due to general absorption) Max. - IS 2380 (Part 17)) |
- |
500 |
|
- |
| As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Screw withdrawal strength (face) , Min. -IS 2380 (Part 4)) |
- |
500 |
|
- |
| As per Clause 9.1 Table 4, Table 5, table 6, Table 7(Screw withdrawal strength (edge) , Min. -IS 2380 (Part 4)) |
- |
500 |
|
- |
| As per Clause 9.1 , Table 6, Table 7(Moisture Resistance : Option 1 : Cyclic test (1. )Internal bond strength Min. -IS 2380 (Part 5) see note 1) |
- |
500 |
|
- |
| As per Clause 9.1 , Table 6, Table 7(Moisture Resistance : Option 2 : Boil test (1.) Internal bond strength , Min.- IS 2380 (Part 5) see note 2) |
- |
500 |
|
- |
| As per Clause 9.1 , Table 8(Abrasion resistance in number of revolutions Min. --Annex. B) |
- |
500 |
|
- |
| As per Clause 9.1 , Table 8(Resiatnce to stream/water vapour - Annex. C) |
- |
500 |
|
- |
| As per Clause 9.1 , Table 8(Resitance to crack -Annex. D) |
- |
500 |
|
- |
| As per Clause 9.1 , Table 8(Resistance to cigarette burn -Annex. E) |
- |
500 |
|
- |
| As per Clause 9.1 , Table 8(Resiatnce to stain - Annex. F) |
- |
500 |
|
- |
| As per Clause 9.1 , Table 9(Formaldehyde content Fc, mg/100 g for oven dry board -IS 13745) |
- |
1500 |
|
- |
|
30 Dec, 2027 |
-
Included w.e.f 14.10.2025
Exclusion: Clause 9.1 , Table 9 (Steady-state formaldehyde emission, Fc, mg/m3 (optional test)) |
| 3791 |
Rajkot Metlab Services LLP, Rajkot
| 7183706
| IS 1364 : Part 3 (2018) |
Hexagon Head Bolts, Screws and Nuts of Product Grades A and B Part 2 Hexagon Head Screws ( Size Range M 1.6 to M 64 ) ( Fifth Revision ) |
- |
22800 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. 3(Dimension) |
- |
4000 |
|
- |
| Cl. 4 and Table 3(Threads and tolerances) |
- |
5000 |
|
- |
| Cl. 4 and Table 3(Mechanical Properties) |
- |
11000 |
|
- |
| Cl. 4 and Table 3(Finish – Coating) |
- |
4000 |
|
- |
| Cl. 4 and Table 3(Surface integrity) |
- |
8000 |
|
- |
|
12 Jan, 2028 |
-
Included w.e.f 12.11.2025 |
| 3792 |
INDIAN TEST HOUSE PRIVATE LIMITED, MURADNAGAR
| 8183336
| IS 12406 (2025) |
Medium Density Fibre Boards of Wood and Other Lignocellulosic Materials for General Purpose - Specification ( Third Revision ) |
REG-Grade,MR GRADE, HMR GRADE -GP , HMR GRADE -FN |
8500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| As per Clause 7(Finish --IS 2380 (Part 2), IS 2380 (Part 3) & Visual) |
- |
100 |
|
- |
| As per Clause 8, Table 2(Length -IS 2380 (Part 2)) |
- |
100 |
|
- |
| As per Clause 8, Table 2(Width - IS 2380 (Part 2)) |
- |
100 |
|
- |
| As per Clause 8, Table 2(Thickness - IS 2380 (Part 2)) |
- |
100 |
|
- |
| As per Clause 8, Table 2(Squareness, Max. - IS 2380 (Part 2)) |
- |
100 |
|
- |
| As per Clause 8, Table 2(Edge straightness, Max.) |
- |
100 |
|
- |
| As per Clause 9.1 Table 3(Density -IS 2380 (Part 3)) |
- |
100 |
|
- |
| As per Clause 9.1 Table 3(Variation from mean density, --IS 2380 (Part 3)) |
- |
500 |
|
- |
| As per Clause 9.1 Table 3(Moisture Content -IS 2380 (Part 3)) |
- |
500 |
|
- |
| As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of rupture (MoR), Min.-IS 2380 (Part 4)) |
- |
1000 |
|
- |
| As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of elasticity (MoE), Min. -(IS 2380 (Part 4)) |
- |
1000 |
|
- |
| As per Clause 9.1 Table 4, Table 5, Table 6, Table7(Internal bond strength, Min. - IS 2380 (Part 5)) |
- |
1000 |
|
- |
| As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(24 h thickness swelling (due to general absorption) Max. - IS 2380 (Part 17)) |
- |
1000 |
|
- |
| As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Screw withdrawal strength (face) , Min. -IS 2380 (Part 4)) |
- |
1000 |
|
- |
| As per Clause 9.1 Table 4, Table 5, table 6, Table 7(Screw withdrawal strength (edge) , Min. -IS 2380 (Part 4)) |
- |
1000 |
|
- |
| As per Clause 9.1 , Table 5, Table 6, Table 7(Moisture Resistance : Option 1 : Cyclic test (1. )Internal bond strength Min. -IS 2380 (Part 5) see note 1) |
- |
1000 |
|
- |
| As per Clause 9.1 , Table 5, Table 6, Table 7(Moisture Resistance : Option 2 : Boil test (1.) Internal bond strength , Min.- IS 2380 (Part 5) see note 2) |
- |
1000 |
|
- |
| As per Clause 9.1 , Table 9(Formaldehyde content Fc, mg/100 g for oven dry board -IS 13745) |
- |
1500 |
|
- |
|
30 Dec, 2027 |
-
Included w.e.f 14.10.2025
Exclusion: Clause 9.1 , Table 9 (Steady-state formaldehyde emission, Fc, mg/m3 (optional test)) |
| 3793 |
Khunti Smart Laboratory, Indian Oil Corporation Limited (IOCL)
| 9194614
| IS 2796 (2017) |
Motor gasoline - Specification (Sixth Revision) |
- |
12780 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (i)(Appearance) |
- |
200 |
|
- |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ii), a)("Colour:
MG 91") |
- |
200 |
|
- |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iii)(Density at 15°C, kg/m³) |
- |
1130 |
|
- |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (a)(percent evaporated at 70°C (E 70°C), percent v/v: Motor gasoline) |
- |
2650 |
|
COMBINED CHARGES FOR , PARAMETERS 70,100,150, FBP & RESIDUE |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (b)(percent evaporated at 100°C (E 100 °C), percent v/v) |
- |
2650 |
|
COMBINED CHARGES FOR , PARAMETERS 70,100,150, FBP & RESIDUE. |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (c)(percent evaporated at 150°C (E 150 °C), percent v/v, Min) |
- |
2650 |
|
COMBINED CHARGES FOR , PARAMETERS 70,100,150, FBP & RESIDUE |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (d)(Final boiling point, °C, Max) |
- |
2650 |
|
COMBINED CHARGES FOR , PARAMETERS 70,100,150, FBP & RESIDUE |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (e)(Residue, percent by volume, Max) |
- |
2650 |
|
COMBINED CHARGES FOR , PARAMETERS 70,100,150, FBP & RESIDUE |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (vii)(Gum content (Solvent washed), g/m3, Max) |
- |
2070 |
|
- |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (viii)(Total sulphur, mg/kg, Max) |
- |
4710 |
|
- |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xiii)(Copper strip corrosion, for 3 h at 50°C, Max) |
- |
1130 |
|
- |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ii), b)("Colour:
MG 95") |
- |
200 |
|
- |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (a)(percent evaporated at 70°C (E 70°C), percent v/v: E10) |
- |
2650 |
|
COMBINED CHARGES FOR , PARAMETERS 70,100,150, FBP & RESIDUE |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xx)(Ethanol content, percent by volume: a) Motor gasoline) |
- |
690 |
|
- |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xx)(Ethanol content, percent by volume: a):- E10) |
- |
690 |
|
- |
|
22 Dec, 2028 |
-
Excluding: Cl-4.1.4, 4.2.2 & 4.4, Table-1 (v) (a) (Research octane number (RON), Min: MG 91) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (v) (b) (Research octane number (RON), Min: MG 95) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (vi) (a) (Motor octane number (MON),Min: MG 91) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (vi) (b) (Motor octane number (MON),Min: MG 95) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ix) (Lead content (as Pb ), g/l, Max Cl-4.1.4, 4.2.2 & 4.4, Table-1 (x) (a) (Reid vapour pressure (RVP) at 38°C, kPa , Max: MG(without ethanol)) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (x) (b) (Reid vapour pressure (RVP) at 38°C, kPa , Max: Ethanol blended MG) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xi) (a) (Vapour lock index (VLI),Max :- MG (without ethanol)) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xii) (Benzene content, percent by volume, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xiv) (a) (Water tolerance of motor gasoline-alcohol blends, temperature for phase separation:- Winter, °C, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xv) (Engine intake system cleanliness) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xvi) (a) (Olefin content, percent by volume, Max: MG 91) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xvi) (b) (Olefin content, percent by volume, Max :MG 95) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xvii) (Oxidation stability, minutes, Min) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xviii) (Aromatics content, percent by volume, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ixi) (Oxygen content, percent by mass, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (XXI) (Oxygenates percent by volume, Max:- Ethers containing 5 or more ‘C’ atoms per molecules such as MTBE, ETBE or TAME) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xi) (b) (Vapour lock index (VLI),Max :- MG (with 5 percent v/v ethanol)) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xi) (c) (Vapour lock index (VLI),Max :- E10) Cl-4.1 (General- Requirements) Cl-4.1.2 (Antioxidants) Cl-4.1.3 (Metal Deactivators) Cl-4.1.5 (Motor gasoline multifunctional additives (MFA),) Cl-4.2.1 (Organic Oxygenates- Permitted Components) Cl-4.3 (Other Requirements) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xiv) (b) (Water tolerance of motor gasoline-alcohol blends, temperature for phase separation:- Other months, °C, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ixi) (Oxygen content, percent by mass, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (XXI) (Oxygenates percent by volume, Max:- Ethers containing 5 or more ‘C’ atoms per molecules such as MTBE, ETBE or TAME) Cl-5.2 (Marketing) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (XXI) (Oxygenates percent by volume, Max) |
| 3794 |
ACCURATE TEST SOLUTIONS LLP (F21), NOIDA
| 8141226
| IS 7872 (2020) |
Deep Freezers - Specification ( Second Revision ) |
- |
155000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 10.2.12(Temperature rise test) |
- |
10000 |
|
- |
| 10.2.11(Measurement ) |
- |
1000 |
|
- |
| 10.2.10.1(Test packages and life time) |
- |
1000 |
|
- |
| 10.2.10(Full load test) |
- |
8000 |
|
- |
| 10.2.8(Earth resistance test ) |
- |
1000 |
|
- |
| 10.2.7(Leakage current test ) |
- |
1000 |
|
- |
| 10.2.6(Insulation resistance test) |
- |
1000 |
|
- |
| 10.2.5(High voltage test) |
- |
1000 |
|
- |
| 10.2.3(Thermal insulation test ) |
- |
10000 |
|
- |
| 10.2.2(Machanical strength of shelves and similar components) |
- |
2000 |
|
- |
| 10.2.1(Door seal test ) |
- |
4000 |
|
- |
| 9.2.2(Power consumption & percentage running time) |
- |
20000 |
|
- |
| 9.2.1(Pull down time) |
- |
8000 |
|
- |
| 9.1(No load test) |
- |
8000 |
|
- |
| 6.11(Volume measurement Water fill method) |
- |
7000 |
|
- |
| 6(Measurement of freezer storage
capacity) |
- |
7000 |
|
- |
| 5.1(Sound level) |
- |
6000 |
|
- |
| 5.6(External surface condensation test) |
- |
10000 |
|
- |
| 5.5(Strength Pressure test for components) |
- |
2000 |
|
- |
| 4.8(Doors & Fittings) |
- |
7000 |
|
- |
| 13(Marking and Instruction) |
- |
1000 |
|
- |
| 11.7(Pressure Test) |
- |
10000 |
|
- |
| 11.6(Thermal Insulation Test ( External Condensation)) |
- |
10000 |
|
- |
| 11.5(Mechanical Strength of Shelves and Similar Components) |
- |
2000 |
|
- |
| 11.4(Door Seal Test) |
- |
4000 |
|
- |
| 11.3(Temperature Rise Test) |
- |
10000 |
|
- |
| 11.2(Energy Consumption Test) |
- |
20000 |
|
- |
| 11.1(No load Pull down Test) |
- |
8000 |
|
- |
| 8(Freezer Storage Capacity) |
- |
7000 |
|
- |
| 7(Sound Pressure Level) |
- |
6000 |
|
- |
| 6(Safety Requirements) |
- |
70000 |
|
- |
| 5.4.4(Fatigue Test) |
- |
10000 |
|
- |
| 5.4.3(Individual Strength - Pressure Test) |
- |
10000 |
|
- |
| 5.4.2(Individual Strength - Pressure Test) |
- |
10000 |
|
- |
| 4.8(Door and Fittings) |
- |
7000 |
|
- |
| 13(Marking and Instruction) |
- |
1000 |
|
- |
| 11.7(Pressure Test) |
- |
10000 |
|
- |
| 11.6(Thermal Insulation Test ( External Condensation)) |
- |
10000 |
|
- |
| 11.5(Mechanical Strength of Shelves and Similar Components) |
- |
2000 |
|
- |
| 11.4(Door Seal Test) |
- |
4000 |
|
- |
| 11.3(Temperature Rise Test) |
- |
10000 |
|
- |
| 11.2(Energy Consumption Test) |
- |
20000 |
|
- |
| 11.1(No load Pull down Test) |
- |
8000 |
|
- |
| 8(Freezer Storage Capacity) |
- |
7000 |
|
- |
| 7(Sound Pressure Level) |
- |
6000 |
|
- |
| 6(Safety Requirements) |
- |
70000 |
|
- |
| 5.4.4(Fatigue Test) |
- |
10000 |
|
- |
| 5.4.3(Individual Strength - Pressure Test) |
- |
10000 |
|
- |
| 5.4.2(Individual Strength - Pressure Test) |
- |
10000 |
|
- |
| 4.8(Door and Fittings) |
- |
7000 |
|
- |
| 5(Refrigeration system) |
- |
10000 |
|
- |
| Cl-4.1(General Design) |
- |
500 |
|
- |
| Cl-4.2(Materials) |
- |
500 |
|
- |
| Cl-4.3(Finish) |
- |
10000 |
|
- |
| Cl-4.4(Thermal Insulation) |
- |
500 |
|
- |
| Cl-4.5(Fittings) |
- |
500 |
|
- |
| Cl-4.6(Hardware) |
- |
500 |
|
- |
| Cl-4.7(Interior Fittings) |
- |
500 |
|
- |
| Cl-4.8(Doors and Fittings) |
- |
7000 |
|
- |
| Cl-4.9(Disposal of Defrost / Condensate Water) |
- |
500 |
|
- |
| Cl-5.1(Construction) |
- |
500 |
|
- |
| Cl-5.2(Control of Operation) |
- |
500 |
|
- |
| Cl-5.3(Location of Components) |
- |
500 |
|
- |
| 6.5(For flammable refrigerant the units should comply with
IS/IEC 60335-2-89) |
- |
500 |
|
- |
| 6.2(The compressor shall comply with the requirements
of IS 10617) |
- |
500 |
|
- |
|
04 Jul, 2027 |
-
Included w.e.f 17.12.2025
Exclusion: Cl.24 of IS/IEC 60335-2-89 and EMI/EMC Tests as per Cl.19.11.4.1 to Cl.19.11.4.7 of IS/IEC 60335-2-89). |
| 3795 |
PIONEER TESTING LABORATORY PRIVATE LIMITED
| 8176806
| IS 18256 (2023) |
Solid Round Glass Fibre Reinforced Polymer (GFRP) Bars for Concrete Reinforcement - Specification |
All |
116000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| (clause 5.1)(Fibre content (mass fraction)) |
- |
4000 |
|
- |
| (clause 5.2)(Glass transition temperature) |
- |
8000 |
|
- |
| (clause 5.3)(Degree of Cure) |
- |
5000 |
|
- |
| (clause 5.4.2)(Measured cross sectional area) |
- |
2000 |
|
- |
| (Table 1)("Minimum bend radius in case of bent
bars") |
- |
4000 |
|
- |
| (clause 6.1 and 8.2.3)(Ultimate Tensile force) |
- |
5800 |
|
- |
| (clause 6.2)(Tensile modulus of elasticity) |
- |
7500 |
|
- |
| (clause 6.3)(Ultimate Tensile Strain) |
- |
3000 |
|
- |
| (clause 6.4)(Transverse shear strength) |
- |
5000 |
|
- |
| (clause 6.5)(Bond Strength) |
- |
15000 |
|
- |
| (clause 6.6)(Fatigue Tensile Strength) |
- |
0 |
|
- |
| (clause 6.7)(Creep Failure) |
- |
0 |
|
- |
| (clause 7.1)("Moisture absorption (Short term & Long
Term)") |
- |
10000 |
|
Short term = 2500,
Long-term = 7500 |
| (clause 7.2)(Resistance to Alkaline Environment) |
- |
35000 |
|
- |
| (clause 7.3)(Longitudinal Wicking) |
- |
0 |
|
- |
| (clause 8.2.4)(Guaranteed ultimate tensile force at 90 degree and tensile modulus of elasticity of bent bar) |
- |
12500 |
|
- |
|
- |
-
Included w.e.f. 04.11.2025
Exclusion: (clause 6.6) (Fatigue Tensile Strength), (clause 6.7) (Creep Failure), (clause 7.3) (Longitudinal Wicking) |
| 3796 |
MALKAPUR LABORATORY (IOCL)
| 6196614
| IS 1460 (2025) |
Automotive Diesel Fuel - Specification (seventh revision) |
- |
17960 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-3.1(General- Requirements) |
- |
0.0 |
|
- |
| Cl-3.1.4 , 3.2, Table-1 (xiii)(Density at 15 °C, kg/m3) |
- |
1130 |
|
Exclusive Tax |
| Cl-3.1.4 , 3.2, Table-1 (ix)(Distillation, 95 percent v/v recovery, °C, Max) |
- |
2650 |
|
- |
| Cl-3.1.4 , 3.2, Table-1 (xiv)(Total sulphur, mg/kg, Max) |
- |
4710 |
|
Exclusive Tax |
| Cl-3.1.4 , 3.2, Table-1 (vii) (a)(Pour point3, °C, Max: Winter) |
- |
1900 |
|
Exclusive Tax |
| Cl-3.1.4 , 3.2, Table-1 (x)(Flash point, Abel4, °C, Min) |
- |
1900 |
|
Exclusive Tax |
| Cl-3.1.4 , 3.2, Table-1 (i)(Appearance) |
- |
200 |
|
Exclusive Tax |
| Cl-3.1.4 , 3.2, Table-1 (vi)(Cetane index, Min) |
- |
3370 |
|
includes Density & Distillation tests
Exclusive Tax |
| Cl-3.1.4 , 3.2, Table-1 (vii) (b)(Pour point3, °C, Max: Summer) |
- |
1900 |
|
Exclusive Tax |
| Cl-3.1.4 , 3.2, Table-1 (iii)(Ash, percent by mass, Max) |
- |
2070 |
|
Exclusive Tax |
| Cl-3.1.4 , 3.2, Table-1 (viii)(Copper strip corrosion for 3 h at 50 °C, Max) |
- |
1130 |
|
Exclusive Tax |
| Cl-3.1.4 , 3.2, Table-1 (xi)(Kinematic viscosity, mm2/s, at 40 °C) |
- |
2270 |
|
Exclusive Tax |
|
09 Feb, 2029 |
-
Excluding: Cl-3.2 (Composition) Cl-3.1.4 , 3.2, Table-1 (ii) C (Total Acid Number (TAN), mg of KOH/g, Max) Cl-3.1.4 , 3.2, Table-1 (iii) (Ash, percent by mass, Max) Cl-3.1.4 , 3.2, Table-1 (iv) (Carbon residue, on 10 percent residue1, percent by mass, Max) Cl-3.1.4 , 3.2, Table-1 (v) (Cetane number, Min) Cl-3.1.4 , 3.2, Table-1 (xii) (Total contamination, mg/kg, Max) Cl-3.1.4 , 3.2, Table-1 (xv) (Water content, mg/kg, Max) Cl-3.1.4 , 3.2, Table-1 (xvi) (a) (Cold Filter Plugging Point (CFPP)3, °C, Max: Winter) Cl-3.1.4 , 3.2, Table-1 (xvi) (b) (Cold Filter Plugging Point (CFPP)3, °C, Max: Summer) Cl-3.1.4 , 3.2, Table-1 (xvii) (Oxidation stability6, g/m3, Max) Cl-3.1.4 , 3.2, Table-1 (xviii) (Oxidation stability (for diesel fuel having FAME content of above 2 percent v/v), hours, Min) Cl-3.1.4 , 3.2, Table-1 (xviii) (Oxidation stability (for diesel fuel having FAME content of above 2 percent v/v), minutes, Min) Cl-3.1.4 , 3.2, Table-1 (xvii) (Oxidation stability6, minutes, Min) Cl-3.1.4 , 3.2, Table-1 (xix) (Polycyclic Aromatic Hydrocarbon (PAH), percent by mass, Max) Cl-3.1.4 , 3.2, Table-1 (xx) (Lubricity, wear scar diameter (wsd) at 60 ºC, μm, Max) Cl-3.1.4 , 3.2, Table-1 (xxi) (FAME content7, percent v/v, Max) Cl-5.2 (Marking) Cl-3.1 (General- Requirements) |
| 3797 |
INDIAN TEST HOUSE PRIVATE LIMITED, MURADNAGAR
| 8183336
| IS 3087 (2025) |
Medium Density Particle Boards of Wood and other Lignocellulosic Materials for General Purpose - Specification ( Third Revision ) |
REG -GRADE-A , REG GRADE-B , MR Grade, HMR Grade |
11500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| As per Clause 7(Finish --IS 2380 (Part 2), IS 2380 (Part 3) & Visual) |
- |
100 |
|
- |
| As per Clause 8, Table 2(Length -IS 2380 (Part 2)) |
- |
100 |
|
- |
| As per Clause 8, Table 2(Width - IS 2380 (Part 2)) |
- |
100 |
|
- |
| As per Clause 8, Table 2(Thickness, Sanded/finished panel - IS 2380 (Part 2)) |
- |
100 |
|
- |
| As per Clause 8, Table 2(Squareness, Max. - IS 2380 (Part 2)) |
- |
100 |
|
- |
| As per Clause 8, Table 2(Edge straightness, Max. -IS 2380 (Part 2)) |
- |
100 |
|
- |
| As per Clause 9.1 Table 3(Density -IS 2380 (Part 3)) |
- |
500 |
|
- |
| As per Clause 9.1 Table 3(Variation from mean density, --IS 2380 (Part 3)) |
- |
500 |
|
- |
| As per Clause 9.1 Table 3(Moisture Content -IS 2380 (Part 3)) |
- |
500 |
|
- |
| As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of rupture (MoR), Min.-IS 2380 (Part 4)) |
- |
1000 |
|
- |
| As per Clause 9.1 Table 4, Table 6, Table 7(Modulus of elasticity (MoE), Min. -(IS 2380 (Part 4)) |
- |
1000 |
|
- |
| As per Clause 9.1 Table 4, Table 5, Table 6, Table7(Internal bond strength, Min. - IS 2380 (Part 5)) |
- |
1000 |
|
- |
| As per Clause 9.1 Table 6, Table 7(24 h thickness swelling (due to general absorption) Max. - IS 2380 (Part 17)) |
- |
1000 |
|
- |
| As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Screw withdrawal strength (face) , Min. -IS 2380 (Part 4)) |
- |
500 |
|
- |
| As per Clause 9.1 Table 4, Table 5, table 6, Table 7(Screw withdrawal strength (edge) , Min. -IS 2380 (Part 4)) |
- |
500 |
|
- |
| As per Clause 9.1 , Table 6, Table 7(Moisture Resistance : Option 1 : Cyclic test (1. )Internal bond strength Min. -IS 2380 (Part 5) see note 1) |
- |
500 |
|
- |
| As per Clause 9.1 , Table 6, Table 7(Moisture Resistance : Option 2 : Boil test (1.) Internal bond strength , Min.- IS 2380 (Part 5) see note 2) |
- |
500 |
|
- |
| As per Clause 9.1 , Table 9(Formaldehyde content Fc, mg/100 g for oven dry board -IS 13745) |
- |
1500 |
|
- |
|
30 Dec, 2027 |
-
Included w.e.f 14.10.2025
Exclusion: Clause 9.1 , Table 9 (Steady-state formaldehyde emission, Fc, mg/m3 (optional test)) |
| 3798 |
Rajkot Metlab Services LLP, Rajkot
| 7183706
| IS 10748 (2004) |
Hot - Rolled steel strip for welded tubes and pipes - Specification (Second Revision) |
All Grade / Type / Size / Designation / Class |
11050 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 8 & Table 3(UTM) |
- |
1000 |
|
- |
| Cl 9(Press) |
- |
100 |
|
- |
| Cl 11(Workmanship) |
- |
100 |
|
- |
| Cl 12 & 13(Length, Width & Thickness) |
- |
200 |
|
- |
| Cl 8 & Table 3(UTM) |
- |
1000 |
|
- |
| Cl 9(Press) |
- |
100 |
|
- |
| Cl 11(Workmanship) |
- |
100 |
|
- |
| Cl 12 & 13(Length, Width & Thickness) |
- |
200 |
|
- |
| Cl 8 & Table 3(UTM) |
- |
1000 |
|
- |
| Cl 9(Press) |
- |
100 |
|
- |
| Cl 11(Workmanship) |
- |
100 |
|
- |
| Cl 12 & 13(Length, Width & Thickness) |
- |
200 |
|
- |
| 7.1(Carbon %) |
- |
500 |
|
- |
| 7.1(Manganese %) |
- |
500 |
|
- |
| 7.1(Phosphorus %) |
- |
500 |
|
- |
| 7.1(Sulphur %) |
- |
500 |
|
- |
| 7.1(Silicon %) |
- |
500 |
|
- |
| 7.1( Copper %) |
- |
500 |
|
- |
| 7.1( Aluminium %) |
- |
500 |
|
- |
| 7.1( Nb) |
- |
500 |
|
- |
| 7.1(V) |
- |
500 |
|
- |
| 7.1( Ti) |
- |
500 |
|
- |
| 7.1(Cr) |
- |
500 |
|
- |
| 7.1(Mo) |
- |
500 |
|
- |
| 7.1(Ni) |
- |
500 |
|
- |
| 7.1( Nitrogen%) |
- |
500 |
|
- |
| 7.1(CE) |
- |
500 |
|
- |
| 7.1(Carbon %) |
- |
500 |
|
- |
| 7.1(Manganese %) |
- |
500 |
|
- |
| 7.1(Phosphorus %) |
- |
500 |
|
- |
| 7.1(Sulphur %) |
- |
500 |
|
- |
| 7.1(Silicon %) |
- |
500 |
|
- |
| 7.1( Copper %) |
- |
500 |
|
- |
| 7.1( Aluminium %) |
- |
500 |
|
- |
| 7.1( Nb) |
- |
500 |
|
- |
| 7.1(V) |
- |
500 |
|
- |
| 7.1( Ti) |
- |
500 |
|
- |
| 7.1(Cr) |
- |
500 |
|
- |
| 7.1(Mo) |
- |
500 |
|
- |
| 7.1(Ni) |
- |
500 |
|
- |
| 7.1( Nitrogen%) |
- |
500 |
|
- |
| 7.1(CE) |
- |
500 |
|
- |
| 7.1(Carbon %) |
- |
500 |
|
- |
| 7.1(Manganese %) |
- |
500 |
|
- |
| 7.1(Phosphorus %) |
- |
500 |
|
- |
| 7.1(Sulphur %) |
- |
500 |
|
- |
| 7.1(Silicon %) |
- |
500 |
|
- |
| 7.1( Copper %) |
- |
500 |
|
- |
| 7.1( Aluminium %) |
- |
500 |
|
- |
| 7.1( Nb) |
- |
500 |
|
- |
| 7.1(V) |
- |
500 |
|
- |
| 7.1( Ti) |
- |
500 |
|
- |
| 7.1(Cr) |
- |
500 |
|
- |
| 7.1(Mo) |
- |
500 |
|
- |
| 7.1(Ni) |
- |
500 |
|
- |
| 7.1( Nitrogen%) |
- |
500 |
|
- |
| 7.1(CE) |
- |
500 |
|
- |
| Table 1 ( Clauses 7.1 ,7.2 )(TITANIUM) |
- |
500 |
|
- |
| Table 1 ( Clauses 7.1 ,7.2 )(VANADIUM) |
- |
500 |
|
- |
| Table 1 ( Clauses 7.1 ,7.2 )(NIOBIUM) |
- |
500 |
|
- |
| Table 1 ( Clauses 7.1 ,7.2 )(CARBON EQUIVELENT ) |
- |
500 |
|
- |
| Table 1 ( Clauses 7.1 ,7.2 )(Molybdenum) |
- |
500 |
|
- |
| Table 1 ( Clauses 7.1 ,7.2 )(Chromium) |
- |
500 |
|
- |
| Table 1 ( Clauses 7.1 ,7.2 )(Nickel) |
- |
500 |
|
- |
| Table 1 ( Clauses 7.1 ,7.2 )( ALUMINIUM) |
- |
500 |
|
- |
| Table 1 ( Clauses 7.1 ,7.2 )(SILICON) |
- |
500 |
|
- |
| Table 1 ( Clauses 7.1 ,7.2 )(NITROGEN) |
- |
500 |
|
- |
| Table 1 ( Clauses 7.1 ,7.2 )(MANGANESE) |
- |
500 |
|
- |
| Table 1 ( Clauses 7.1 ,7.2 )(PHOSPHURS) |
- |
500 |
|
- |
| Table 1 ( Clauses 7.1 ,7.2 )(SULPHUR) |
- |
500 |
|
- |
| Table 1 ( Clauses 7.1 ,7.2 )( CARBON) |
- |
500 |
|
- |
| Cl. 14(Weight) |
- |
100 |
|
- |
| Cl. 12, 13(Camber) |
- |
100 |
|
- |
| Cl. 12, 13(Thickness) |
- |
100 |
|
- |
| Cl. 8, Table 3(Elongation) |
- |
500 |
|
- |
| Cl. 8, Table 3(Yield Stress) |
- |
500 |
|
- |
| Cl 12 & 13(Length, Width & Thickness) |
- |
300 |
|
- |
| Cl 11(Workmanship) |
- |
100 |
|
- |
| Cl 9(Press) |
- |
100 |
|
- |
| Cl 8 & Table 3(UTM) |
- |
1000 |
|
- |
| Cl 8 & Table 3(UTM) |
- |
1000 |
|
- |
| Cl 9(Press) |
- |
100 |
|
- |
| Cl 11(Workmanship) |
- |
100 |
|
- |
| Cl 12 & 13(Length, Width & Thickness) |
- |
300 |
|
- |
| 7.0 (7)(Micro Alloying elements - IS:8811) |
- |
1500 |
|
- |
| 8.0 (1)(Tensile Strength-IS:1608(P1)) |
- |
500 |
|
- |
| 8.0 (2)(Yield Strength-IS:1608(P1)) |
- |
500 |
|
- |
| 8.0 (3)(Elongation on 5.65 SoA GL-IS:1608(P1)) |
- |
500 |
|
- |
| 12 (1)(Width - SOP MT-23) |
- |
100 |
|
- |
| 12 (2)(Thickness- SOP MT-23) |
- |
100 |
|
- |
| 12 (3)(Mass of Strip- SOP MT-23) |
- |
100 |
|
- |
| 15.0 & 15.1(Coil edges - IS:10748) |
- |
100 |
|
- |
| 15.0 & 15.2(Surface finish - IS:10748) |
- |
100 |
|
- |
| 15.0 & 15.5(Telescopicity - IS:10748) |
- |
100 |
|
- |
| 15(Condition of Coil) |
- |
100 |
|
- |
| 16(Marking) |
- |
100 |
|
- |
| 3.4(Vehicle Fuel System) |
- |
100 |
|
- |
| 9(Protective Treatment) |
- |
100 |
|
- |
| Table 1 ( Clauses 7.1 ,7.2 )(Tungsten (W)) |
- |
500 |
|
- |
| Table 1 ( Clauses 7.1 ,7.2 )(Boron (B)) |
- |
500 |
|
- |
| CL 12(Average Width (04)) |
- |
100 |
|
- |
| CL 12(Average Thickness (08)) |
- |
100 |
|
- |
|
12 Jan, 2028 |
-
Included w.e.f. 04.11.2025 |
| 3799 |
Rajkot Metlab Services LLP, Rajkot
| 7183706
| IS 1285 (2023) |
WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS EXTRUDED ROUND TUBE AND HOLLOW SECTIONS FOR GENERAL ENGINEERINGPURPOSES SPECIFICATION |
All Grade / Type / Size / Designation / Class |
12500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.1("The extruded round tube and hollow sections
shall be sound and visually free from harmful
defects. ") |
- |
1000 |
|
- |
| 6.2(Slight discoloration due to heat treatment, minor polishing marks and spiral marks due to roll straightening shall not be a cause for rejection.) |
- |
1000 |
|
- |
| 8("Dimensions and tolerances of the material shall be as laid down in the Indian Standards indicated
below:
a) Extruded round tube IS 2673; and
b) Extruded hollow sections IS 6477.") |
- |
1000 |
|
- |
| 9(" Extruded round tubes and hollow sections shall be made from alloys specified in IS 733.
9.2 The chemical analysis of the material shall be carried out either in accordance with the methods specified in IS 504 (Part 1 to 12) and IS 504 (Part 13 to 16) or by any other established instrumental/chemical method. In case of any dispute the method specified in relevant parts of IS 504 shall be used as referee method. However, when the method is not given in IS 504, the referee method shall be as agreed to between the purchaser
and the manufacturer. ") |
- |
1000 |
|
- |
| 10(Tensile test) |
- |
2500 |
|
- |
| Cl.9.1(Aluminium- IS 504 and its parts or any other intrumental/chemical methods) |
- |
1000 |
|
- |
| Cl.9.1(Copper- IS 504 and its parts or any other intrumental/chemical methods) |
- |
1000 |
|
- |
| Cl.9.1(Magnesium- IS 504 and its parts or any other intrumental/chemical methods) |
- |
1000 |
|
- |
| Cl.9.1(Silicon- IS 504 and its parts or any other intrumental/chemical methods) |
- |
1000 |
|
- |
| Cl.9.1(Iron- IS 504 and its parts or any other intrumental/chemical methods) |
- |
1000 |
|
- |
| Cl.9.1(Manganese- IS 504 and its parts or any other intrumental/chemical methods) |
- |
1000 |
|
- |
| Cl.9.1(Zinc- IS 504 and its parts or any other intrumental/chemical methods) |
- |
1000 |
|
- |
| Cl.9.1(Titanium and/ or other grain refining elements- IS 504 and its parts or any other intrumental/chemical methods) |
- |
1000 |
|
- |
| Cl.9.1(Chromium- IS 504 and its parts or any other intrumental/chemical methods) |
- |
1000 |
|
- |
| Cl.9.1(Remarks (Ti+V) - IS 504 and its parts or any other intrumental/chemical methods) |
- |
2000 |
|
- |
| Cl.9.1(Remarks (Cr+Mn) - IS 504 and its parts or any other intrumental/chemical methods) |
- |
2000 |
|
- |
| Cl.9.1(Remarks (Total Impurities)- IS 504 and its parts or any other intrumental/chemical methods) |
- |
2000 |
|
- |
|
12 Jan, 2028 |
-
Included w.e.f 08.12.2025 |
| 3800 |
INDIAN OIL CORPORATION LIMITED (IOCL), RAJBANDH TERMINAL LABORATORY
| 5190214
| IS 15464 (2022) |
ANHYDROUS ETHANOL FOR USE AS BLENDING COMPONENT IN MOTOR GASOLINE SPECIFICATION First Revision |
- |
18780.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.4-Table 1-ii)(Relative density at 15.6/15.6 °C, Max) |
- |
1130.00 |
|
- |
| 4.4-Table 1-viii)(Acidity (as CH3 COOH), mg/kg, Max.) |
- |
400.00 |
|
- |
| 4.4-Table 1-iii)(Ethanol, percent, v/v, Min1)). (excluding denaturant)) |
- |
1340.00 |
|
- |
| 4.4-Table 1-vii)(Residue on evaporation, percent by mass, Max.) |
- |
1900.00 |
|
- |
| 4.4-Table 1-i)(Appearance) |
- |
200.00 |
|
- |
| 4.4-Table 1-iv)(Ethanol, percent, v/v, Min1). (excluding denaturant)) |
- |
1130.00 |
|
- |
| 4.4-Table 1-x)(Aldehyde (as CH3 CHO) content, mg/l, Max) |
- |
1900.00 |
|
- |
| 4.4-Table 1-xii)(Copper, mg/kg, Max.) |
- |
1130.00 |
|
- |
| 4.4-Table 1-xv)(Sulfur content, mg/kg, Max.) |
- |
4710.00 |
|
- |
| 4.4-Table 1-xvii)(Water content, percent v/v, Max.) |
- |
4160.00 |
|
- |
| 4.4-Table 1-ix)(Alkalinity, mg/kg, Max.) |
- |
400.00 |
|
- |
|
10 Nov, 2028 |
-
Exclusion: 4.1 (Description)
4.2 (Denaturant)
4.3 (Acidity)
4.4-Table 1 iv (Methanol)
4.4-Table 1-v) (Higher saturated alcohols (C3-C5), percent, v/v, Max)
4.4-Table 1-vi) (Boiling point, °C, Min.)
4.4-Table 1-xi) (Electrical conductivity, µS/m, Max)
4.4-Table 1-xii) (Copper, mg/kg, Max.)
4.4-Table 1-xiii) (pHe)
4.4-Table 1-xiv) (Inorganic chloride, mg/kg, Max.)
4.4-Table 1-xix) (Miscibility with water)
4.4-Table 1-xvi) (Sulphate content, mg/kg Max.)
4.4-Table 1-xviii) (Hydrocarbons, percent v/v)
5.1 (Packing)
5.2 (Marking)
7.1 (Tests shall be conducted) |
| 3801 |
INDIAN OIL CORPORATION LIMITED (IOCL), RAJBANDH TERMINAL LABORATORY
| 5190214
| IS 15607 (2022) |
Biodiesel B-100 - Fatty Acid Methyl Esters FAME Specification Second Revision |
- |
21540.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.4-Table 1-i)(Appearance, visual) |
- |
200.00 |
|
- |
| 4.4-Table 1-ii)(Colour, visual) |
- |
200.00 |
|
- |
| 4.4-Table 1-iv)(Kinematic viscosity at 40 °C, cSt) |
- |
2270.00 |
|
- |
| 4.4-Table 1-iii)(Density at 15 °C, kg/m3) |
- |
1130.00 |
|
- |
| 4.4-Table 1-v)(Flash point (PMCC)1) °C, Min) |
- |
1900.00 |
|
- |
| 4.4-Table 1-vi)(Total Sulphur, mg/kg, Max) |
- |
4710.00 |
|
- |
| 4.4-Table 1-ix)(Water content mg/kg, Max) |
- |
4160.00 |
|
- |
| 4.4-Table 1-xi)(Copper strip corrosion, 3 h at 50 °C, Max) |
- |
1130.00 |
|
- |
| 4.4-Table 1-xiii)(Acid value, mg KOH/g, Max) |
- |
2270.00 |
|
- |
| 4.4-Table 1-xxvi)(Cold filter plugging point (CFPP), °C Max
a) summer 18 – Part 110
b) winter3)) |
- |
0.00 |
|
- |
|
10 Nov, 2028 |
-
Exclusion: 4.1 (General)
4.2 (Additives)
4.3 (The materials shall be free from grit)
4.4-Table 1-vii) (Carbon residue (MCR) 2) percent by mass, Max)
4.4-Table 1-viii) (Sulfated ash, percent by mass, Max)
4.4-Table 1-x) (Total contamination, mg/kg, Max)
4.4-Table 1-xii) (Cetane No., Min)
4.4-Table 1-xiv) (Methanol, percent by mass, Max)
4.4-Table 1-xix) (Free Glycerol percent by mass, Max)
4.4-Table 1-xv) (Ester content, percent by mass, Min)
4.4-Table 1-xvi) (Monoglycerides content, percent by mass, Max)
4.4-Table 1-xvii) (Diglyceride content, percent by mass, Max)
4.4-Table 1-xviii) (Triglyceride content, percent by mass, Max)
4.4-Table 1-xx) (Total Glycerol percent by mass, Max)
4.4-Table 1-xxi) (Phosphorous mg/kg, Max)
4.4-Table 1-xxii) (Sodium + Potassium mg/kg, Max)
4.4-Table 1-xxiii) (Calcium + Magnesium mg/kg, Max)
4.4-Table 1-xxiv) (Iodine value, gm iodine/100 gm, Max)
4.4-Table 1-xxv) (Oxidation stability, at 110 °C, Min hrs. Accelerated)
4.4-Table 1-xxvi) (Cold filter plugging point (CFPP), °C Max a) summer 18 – Part 110 b) winter3))
4.4-Table 1-xxvii) (Linolenic acid methyl ester, percent m/m, Max)
4.4-Table 1-xxviii) (Polyunsaturated (>_ 4 double bonds) methyl ester percent m/m, Max)
5.1 (Packing)
5.2 (Marking) |
| 3802 |
INDIAN OIL CORPORATION LIMITED (IOCL), RAJBANDH TERMINAL LABORATORY
| 5190214
| IS 1459 (2018) |
Kerosene - Specification (Fourth Revision) |
- |
10990.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.2-Table 1-i)(Appearance) |
- |
200.00 |
|
- |
| 4.2-Table 1-v)(Copper strip corrosion for 3 h at 50°C) |
- |
1130.00 |
|
- |
| 4.2-Table 1-vi)(Density at 15°C, kg/m3) |
- |
1130.00 |
|
- |
| 4.2-Table 1-vii)(Distillation
a)Percent recovered below200°C, percent (v/v), Min
b)Final boiling point, °C, Max
) |
- |
2650.00 |
|
- |
| 4.2-Table 1-viii)(Flash point ( Abel), °C, Min) |
- |
1900.00 |
|
- |
| 4.2-Table 1-ix)(Smoke Point4), mm, Min) |
- |
1130.00 |
|
- |
| 4.2-Table 1-x)(Total Sulphur Content, percent, m/m, Max) |
- |
2650.00 |
|
- |
| 4.2-Table 1-iv)(Colour
a)Saybolt (in cas of undyedKerosene)3), Min
b)Visual (in case of dyed Kerosene)) |
- |
200.00 |
|
- |
|
10 Nov, 2028 |
-
Exclusion: 4.2-Table 1-ii) (Acidity, inorganic)
4.2-Table 1-iii) (Burning quality2) a)Char Value, mg/kg of oil consumed, Max b)Bloom on glass Chimney)
4.2-Table 1-iv) (Colour a)Saybolt (in cas of undyedKerosene)3), Min b)Visual (in case of dyed Kerosene))
5.1 (Packing)
5.2 (Marking) |
| 3803 |
INDIAN OIL CORPORATION LIMITED (IOCL), RAJBANDH TERMINAL LABORATORY
| 5190214
| IS 1460 (2025) |
Automotive Diesel Fuel - Specification (seventh revision) |
- |
22310.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-3.1.4 , 3.2, Table-1 (xiii)(Density at 15 °C, kg/m3) |
- |
1130.00 |
|
without GST |
| Cl-3.1.4 , 3.2, Table-1 (xi)(Kinematic viscosity, mm2/s, at 40 °C) |
- |
2270.00 |
|
without GST |
| Cl-3.1.4 , 3.2, Table-1 (ix)(Distillation, 95 percent v/v recovery, °C, Max) |
- |
2650.00 |
|
without GST |
| Cl-3.1.4 , 3.2, Table-1 (x)(Flash point, Abel4, °C, Min) |
- |
1900.00 |
|
without GST |
| Cl-3.1.4 , 3.2, Table-1 (xiv)(Total sulphur, mg/kg, Max) |
- |
4710.00 |
|
without GST |
| Cl-3.1.4 , 3.2, Table-1 (viii)(Copper strip corrosion for 3 h at 50 °C, Max) |
- |
1130.00 |
|
without GST |
| Cl-3.1.4 , 3.2, Table-1 (vii) (a)(Pour point3, °C, Max: Winter) |
- |
1900.00 |
|
without GST |
| Cl-3.1.4 , 3.2, Table-1 (i)(Appearance) |
- |
200.00 |
|
without GST |
| Cl-3.1.4 , 3.2, Table-1 (xvi) (b)(Cold Filter Plugging Point (CFPP)3, °C, Max: Summer) |
- |
0.00 |
|
- |
| Cl-3.1.4 , 3.2, Table-1 (xvi) (a)(Cold Filter Plugging Point (CFPP)3, °C, Max: Winter) |
- |
0.00 |
|
- |
| Cl-3.1.4 , 3.2, Table-1 (vii) (b)(Pour point3, °C, Max: Summer) |
- |
1900.00 |
|
without GST |
| Cl-3.1.4 , 3.2, Table-1 (xv)(Water content, mg/kg, Max) |
- |
4160.00 |
|
- |
| Cl-3.1.4 , 3.2, Table-1 (vi)(Cetane index, Min) |
- |
3770.00 |
|
- |
| Cl-3.1.4 , 3.2, Table-1 (ii) C(Total Acid Number (TAN), mg of KOH/g, Max) |
- |
2270.00 |
|
- |
|
10 Nov, 2028 |
-
Exclusion: Cl-3.1 (General- Requirements)
Cl-3.1.4 , 3.2, Table-1 (iii) (Ash, percent by mass, Max)
Cl-3.1.4 , 3.2, Table-1 (iv) (Carbon residue, on 10 percent residue1, percent by mass, Max)
Cl-3.1.4 , 3.2, Table-1 (v) (Cetane number, Min)
Cl-3.1.4 , 3.2, Table-1 (xii) (Total contamination, mg/kg, Max)
Cl-3.1.4 , 3.2, Table-1 (xix) (Polycyclic Aromatic Hydrocarbon (PAH), percent by mass, Max)
Cl-3.1.4 , 3.2, Table-1 (xvi) (a) (Cold Filter Plugging Point (CFPP)3, °C, Max: Winter)
Cl-3.1.4 , 3.2, Table-1 (xvi) (b) (Cold Filter Plugging Point (CFPP)3, °C, Max: Summer)
Cl-3.1.4 , 3.2, Table-1 (xvii) (Oxidation stability6, g/m3, Max)
Cl-3.1.4 , 3.2, Table-1 (xvii) (Oxidation stability6, minutes, Min)
Cl-3.1.4 , 3.2, Table-1 (xvii) (Oxidation stability6, minutes, Min)
Cl-3.1.4 , 3.2, Table-1 (xviii) (Oxidation stability (for diesel fuel having FAME content of above 2 percent v/v), hours, Min)
Cl-3.1.4 , 3.2, Table-1 (xviii) (Oxidation stability (for diesel fuel having FAME content of above 2 percent v/v), minutes, Min)
Cl-3.1.4 , 3.2, Table-1 (xx) (Lubricity, wear scar diameter (wsd) at 60 ºC, μm, Max)
Cl-3.1.4 , 3.2, Table-1 (xxi) (FAME content7, percent v/v, Max)
Cl-3.2 (Composition)
Cl-5.2 (Marking) |
| 3804 |
INDIAN OIL CORPORATION LIMITED (IOCL), RAJBANDH TERMINAL LABORATORY
| 5190214
| IS 2796 (2017) |
Motor gasoline - Specification (Sixth Revision) |
- |
12090.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (i)(Appearance) |
- |
200.00 |
|
- |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ii), a)("Colour:
MG 91") |
- |
200.00 |
|
- |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iii)(Density at 15°C, kg/m³) |
- |
1130.00 |
|
- |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (a)(percent evaporated at 70°C (E 70°C), percent v/v: Motor gasoline) |
- |
2650.00 |
|
- |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (b)(percent evaporated at 100°C (E 100 °C), percent v/v) |
- |
2650.00 |
|
- |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (c)(percent evaporated at 150°C (E 150 °C), percent v/v, Min) |
- |
2650.00 |
|
- |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (d)(Final boiling point, °C, Max) |
- |
2650.00 |
|
- |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (e)(Residue, percent by volume, Max) |
- |
2650.00 |
|
- |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (vii)(Gum content (Solvent washed), g/m3, Max) |
- |
2070.00 |
|
- |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (viii)(Total sulphur, mg/kg, Max) |
- |
4170.00 |
|
- |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xiii)(Copper strip corrosion, for 3 h at 50°C, Max) |
- |
1130.00 |
|
- |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ii), b)("Colour:
MG 95") |
- |
200.00 |
|
- |
|
10 Nov, 2028 |
-
Exclusion:
Cl-4.1 (General- Requirements)
Cl-4.1.2 (Antioxidants)
Cl-4.1.3 (Metal Deactivators)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (a) (percent evaporated at 70°C (E 70°C), percent v/v: E10)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ix) (Lead content (as Pb ), g/l, Max)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ixi) (Ethanol content, percent by volume: a) Motor gasoline)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ixi) (Ethanol content, percent by volume: a):- E10)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ixi) (Oxygen content, percent by mass, Max)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (v) (a) (Research octane number (RON), Min: MG 91)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (v) (b) (Research octane number (RON), Min: MG 95)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (vi) (a) (Motor octane number (MON),Min: MG 91)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (vi) (b) (Motor octane number (MON),Min: MG 95)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (x) (a) (Reid vapour pressure (RVP) at 38°C, kPa , Max: MG(without ethanol))
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (x) (b) (Reid vapour pressure (RVP) at 38°C, kPa , Max: Ethanol blended MG)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xi) (a) (Vapour lock index (VLI),Max :- MG (without ethanol))
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xi) (b) (Vapour lock index (VLI),Max :- MG (with 5 percent v/v ethanol))
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xi) (c) (Vapour lock index (VLI),Max :- E10)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xii) (Benzene content, percent by volume, Max)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xiv) (a) (Water tolerance of motor gasoline-alcohol blends, temperature for phase separation:- Winter, °C, Max)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xiv) (b) (Water tolerance of motor gasoline-alcohol blends, temperature for phase separation:- Other months, °C, Max)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xv) (Engine intake system cleanliness)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xvi) (a) (Olefin content, percent by volume, Max: MG 91)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xvi) (b) (Olefin content, percent by volume, Max :MG 95)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xvii) (Oxidation stability, minutes, Min)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xviii) (Aromatics content, percent by volume, Max)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (XXI) (Oxygenates percent by volume, Max)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (XXI) (Oxygenates percent by volume, Max:- Ethers containing 5 or more ‘C’ atoms per molecules such as MTBE, ETBE or TAME)
Cl-4.1.5 (Motor gasoline multifunctional additives (MFA),)
Cl-4.2.1 (Organic Oxygenates- Permitted Components)
Cl-4.3 (Other Requirements)
Cl-5.2 (Markeing) |
| 3805 |
JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR
| 9164606
| IS 18256 (2023) |
Solid Round Glass Fibre Reinforced Polymer (GFRP) Bars for Concrete Reinforcement - Specification |
All tests except cl. 5.2, 5.3, 6.4, 6.5, 6.6, 6.7, 7.3, 8.2.4 |
19000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| (clause 5.1)(Fibre content (mass fraction)) |
- |
1500 |
|
- |
| (clause 5.2)(Glass transition temperature) |
- |
0 |
|
- |
| (clause 5.3)(Degree of Cure) |
- |
0 |
|
- |
| (clause 5.4.2)(Measured cross sectional area) |
- |
1500 |
|
- |
| (Table 1)("Minimum bend radius in case of bent
bars") |
- |
1500 |
|
- |
| (clause 6.1 and 8.2.3)(Ultimate Tensile force) |
- |
2500 |
|
- |
| (clause 6.2)(Tensile modulus of elasticity) |
- |
2500 |
|
- |
| (clause 6.3)(Ultimate Tensile Strain) |
- |
2500 |
|
- |
| (clause 6.4)(Transverse shear strength) |
- |
0 |
|
- |
| (clause 6.5)(Bond Strength) |
- |
0 |
|
- |
| (clause 6.6)(Fatigue Tensile Strength) |
- |
0 |
|
- |
| (clause 6.7)(Creep Failure) |
- |
0 |
|
- |
| (clause 7.1)("Moisture absorption (Short term & Long
Term)") |
- |
3500 |
|
- |
| (clause 7.2)(Resistance to Alkaline Environment) |
- |
3500 |
|
- |
| (clause 7.3)(Longitudinal Wicking) |
- |
0 |
|
- |
| (clause 8.2.4)(Guaranteed ultimate tensile force at 90 degree and tensile modulus of elasticity of bent bar) |
- |
0 |
|
- |
| (clause 5.1)(Fibre content (mass fraction)) |
- |
- |
|
- |
| (clause 5.2)(Glass transition temperature) |
- |
- |
|
- |
| (clause 5.3)(Degree of Cure) |
- |
- |
|
- |
| (clause 5.4.2)(Measured cross sectional area) |
- |
- |
|
- |
| (Table 1)("Minimum bend radius in case of bent
bars") |
- |
- |
|
- |
| (clause 6.1 and 8.2.3)(Ultimate Tensile force) |
- |
- |
|
- |
| (clause 6.2)(Tensile modulus of elasticity) |
- |
- |
|
- |
| (clause 6.3)(Ultimate Tensile Strain) |
- |
- |
|
- |
| (clause 6.4)(Transverse shear strength) |
- |
- |
|
- |
| (clause 6.5)(Bond Strength) |
- |
- |
|
- |
| (clause 6.6)(Fatigue Tensile Strength) |
- |
- |
|
- |
| (clause 6.7)(Creep Failure) |
- |
- |
|
- |
| (clause 7.1)("Moisture absorption (Short term & Long
Term)") |
- |
- |
|
- |
| (clause 7.2)(Resistance to Alkaline Environment) |
- |
- |
|
- |
| (clause 7.3)(Longitudinal Wicking) |
- |
- |
|
- |
| (clause 8.2.4)(Guaranteed ultimate tensile force at 90 degree and tensile modulus of elasticity of bent bar) |
- |
- |
|
- |
|
- |
-
Included w.e.f.26.09.2025
Exclusion
(clause 5.2) (Glass transition temperature)
(clause 5.3) (Degree of Cure)
(clause 6.4) (Transverse shear strength)
(clause 6.5) (Bond Strength)
(clause 6.6) (Fatigue Tensile Strength)
(clause 6.7) (Creep Failure)
(clause 7.3) (Longitudinal Wicking)
(clause 8.2.4) (Guaranteed ultimate tensile force at 90 degree and tensile modulus of elasticity of bent bar) |
| 3806 |
INDIAN TEST HOUSE PRIVATE LIMITED, MURADNAGAR
| 8183336
| IS 14587 (2025) |
Prelaminated Medium Density Fibre Boards of Wood and Other Lignocellulosic Materials - Specification ( Second Revision ) |
REG GRADE, MR GRADE, HMR -GP GRADE, HMR-FN GRADE ,TYPE 1, TYPE 2, TYPE 3, TYPE 4, |
14500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| As per Clause 8 Table 2(Length -IS 2380 (Part 2)) |
- |
500 |
|
- |
| As per Clause 8 Table 2(Width - IS 2380 (Part 2)) |
- |
500 |
|
- |
| As per Clause 8 Table 2(Thickness - IS 2380 (Part 2)) |
- |
500 |
|
- |
| As per Clause 8 Table 2(Squareness, Max -IS 2380 (Part 2)) |
- |
500 |
|
- |
| As per Clause 8 Table 2(Edge Straighness, Max - IS 2380 (Part 2)) |
- |
500 |
|
- |
| As per Clause 9.1 Table 3(Density -IS 2380 (Part 3)) |
- |
1000 |
|
- |
| As per Clause 9.1 Table 3(Variation from mean density, --IS 2380 (Part 3)) |
- |
1000 |
|
- |
| As per Clause 9.1 Table 3(Moisture Content -IS 2380 (Part 3)) |
- |
100 |
|
- |
| As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of rupture (MoR), Min.-IS 2380 (Part 4)) |
- |
100 |
|
- |
| As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of elasticity (MoE), Min. -(IS 2380 (Part 4)) |
- |
1000 |
|
- |
| As per Clause 9.1 Table 4, Table 5, Table 6, Table7(Internal bond strength, Min. - IS 2380 (Part 5)) |
- |
1000 |
|
- |
| As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(24 h thickness swelling (due to general absorption) Max. - IS 2380 (Part 17)) |
- |
1000 |
|
- |
| As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Screw withdrawal strength (face) , Min. -IS 2380 (Part 4)) |
- |
1000 |
|
- |
| As per Clause 9.1 Table 4, Table 5, table 6, Table 7(Screw withdrawal strength (edge) , Min. -IS 2380 (Part 4)) |
- |
1000 |
|
- |
| As per Clause 9.1 , Table 5, Table 6, Table 7(Moisture Resistance : Option 1 : Cyclic test (1. )Internal bond strength Min. -IS 2380 (Part 5) see note 1) |
- |
1000 |
|
- |
| As per Clause 9.1 , Table 5, Table 6, Table 7(Moisture Resistance : Option 2 : Boil test (1.) Internal bond strength , Min.- IS 2380 (Part 5) see note 2) |
- |
1000 |
|
- |
| As per Clause 9.1 , Table 8(Abrasion resistance in number of revolutions Min. --Annex. B) |
- |
1000 |
|
- |
| As per Clause 9.1 , Table 8(Resiatnce to stream/water vapour - Annex. C) |
- |
1000 |
|
- |
| As per Clause 9.1 , Table 8(Resitance to crack -Annex. D) |
- |
1000 |
|
- |
| As per Clause 9.1 , Table 8(Resistance to cigarette burn -Annex. E) |
- |
500 |
|
- |
| As per Clause 9.1 , Table 8(Resiatnce to stain - Annex. F) |
- |
500 |
|
- |
| As per Clause 9.1 , Table 8(Resiatnce to stain - Annex. F) |
- |
500 |
|
- |
| As per Clause 9.1 , Table 9(Formaldehyde content Fc, mg/100 g for oven dry board -IS 13745) |
- |
2500 |
|
- |
| As per Clause 9.1 , Table 9(Steady-state formaldehyde emission, Fc, mg/m3 (optional test)) |
- |
0 |
|
- |
| As per Clause 8 Table 2(Length -IS 2380 (Part 2)) |
- |
500 |
|
- |
| As per Clause 8 Table 2(Width - IS 2380 (Part 2)) |
- |
500 |
|
- |
| As per Clause 8 Table 2(Thickness - IS 2380 (Part 2)) |
- |
500 |
|
- |
| As per Clause 8 Table 2(Squareness, Max -IS 2380 (Part 2)) |
- |
500 |
|
- |
| As per Clause 8 Table 2(Edge Straighness, Max - IS 2380 (Part 2)) |
- |
500 |
|
- |
| As per Clause 9.1 Table 3(Density -IS 2380 (Part 3)) |
- |
500 |
|
- |
| As per Clause 9.1 Table 3(Variation from mean density, --IS 2380 (Part 3)) |
- |
500 |
|
- |
| As per Clause 9.1 Table 3(Moisture Content -IS 2380 (Part 3)) |
- |
500 |
|
- |
| As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of rupture (MoR), Min.-IS 2380 (Part 4)) |
- |
500 |
|
- |
| As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of elasticity (MoE), Min. -(IS 2380 (Part 4)) |
- |
500 |
|
- |
| As per Clause 9.1 Table 4, Table 5, Table 6, Table7(Internal bond strength, Min. - IS 2380 (Part 5)) |
- |
500 |
|
- |
| As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(24 h thickness swelling (due to general absorption) Max. - IS 2380 (Part 17)) |
- |
500 |
|
- |
| As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Screw withdrawal strength (face) , Min. -IS 2380 (Part 4)) |
- |
500 |
|
- |
| As per Clause 9.1 Table 4, Table 5, table 6, Table 7(Screw withdrawal strength (edge) , Min. -IS 2380 (Part 4)) |
- |
500 |
|
- |
| As per Clause 9.1 , Table 5, Table 6, Table 7(Moisture Resistance : Option 1 : Cyclic test (1. )Internal bond strength Min. -IS 2380 (Part 5) see note 1) |
- |
500 |
|
- |
| As per Clause 9.1 , Table 5, Table 6, Table 7(Moisture Resistance : Option 2 : Boil test (1.) Internal bond strength , Min.- IS 2380 (Part 5) see note 2) |
- |
500 |
|
- |
| As per Clause 9.1 , Table 8(Abrasion resistance in number of revolutions Min. --Annex. B) |
- |
1000 |
|
- |
| As per Clause 9.1 , Table 8(Resiatnce to stream/water vapour - Annex. C) |
- |
500 |
|
- |
| As per Clause 9.1 , Table 8(Resitance to crack -Annex. D) |
- |
500 |
|
- |
| As per Clause 9.1 , Table 8(Resistance to cigarette burn -Annex. E) |
- |
500 |
|
- |
| As per Clause 9.1 , Table 8(Resiatnce to stain - Annex. F) |
- |
500 |
|
- |
| As per Clause 9.1 , Table 8(Resiatnce to stain - Annex. F) |
- |
500 |
|
- |
| As per Clause 9.1 , Table 9(Formaldehyde content Fc, mg/100 g for oven dry board -IS 13745) |
- |
2500 |
|
- |
| As per Clause 9.1 , Table 9(Steady-state formaldehyde emission, Fc, mg/m3 (optional test)) |
- |
0 |
|
- |
|
30 Dec, 2027 |
-
Included w.e.f 14.10.2025
Exclusion: Clause 9.1 , Table 9 (Steady-state formaldehyde emission, Fc, mg/m3 (optional test)) |
| 3807 |
ACCURATE TEST SOLUTIONS LLP (F21), NOIDA
| 8141226
| IS 17550 : Part 3 (2025) |
Household Refrigerating Appliances - Characteristics and Methods Of Test Part 3 Energy Consumption and Volume (First Revision) |
- |
130000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Clause 4.1, Annex A(set up for energy consumption) |
- |
10000 |
|
- |
| Clause 4.2, Annex B(Steady state power consumption) |
- |
15000 |
|
- |
| Clause 4.3, Annex C(Defrost and Recovery Energy and Temperature Change) |
- |
15000 |
|
- |
| Clause 4.4, Annex D(Defrost Frequency) |
- |
20500 |
|
- |
| Clause 4.5, Annex E(Number of Test Points and Interpolation) |
- |
10000 |
|
- |
| Clause 4.6, Annex G(Load Processing Efficiency) |
- |
20000 |
|
- |
| Clause 4.7, Annex F(Specified Auxiliaries) |
- |
20000 |
|
- |
| Clause 4.8, Annex H(Volume determination) |
- |
9500 |
|
- |
| Clause 4.8.1, Annex H(Rated total volume) |
- |
9500 |
|
- |
| Clause 5, 5.1, 5.2 Table 1(TARGET TEMPERATURES FOR ENERGY DETERMINATION) |
- |
10000 |
|
- |
| Clause 6, 6.1 to 6.8(DETERMINATION OF ENERGY CONSUMPTION) |
- |
20000 |
|
- |
|
04 Jul, 2027 |
-
Included w.e.f 17.12.2025 |
| 3808 |
Indian Oil Corporation (IOCL) Mathura Terminal Laboratory
| 9197314
| IS 73 (2013) |
Paving bitumen - Specification (Fourth Revision) |
BITUMEN |
20000.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.2 Table 1(Absolute viscosity at 60°C, VG 40 ) |
- |
5460.00 |
|
- |
| 6.2 Table 1(Penetration at 25°C,VG 40 ) |
- |
4240 |
|
- |
| 6.2 Table 1(Kinematic viscosity at 135°C, VG 40 ) |
- |
4240.00 |
|
- |
| 6.2 Table 1(Softening point (R&B),VG 40 ) |
- |
3030.00 |
|
- |
| 6.2 Table 1(Solubility in trichloroethylene, All Grades) |
- |
3030.00 |
|
- |
|
12 Mar, 2029 |
-
- |
| 3809 |
Indian Oil Corporation (IOCL) Mathura Terminal Laboratory
| 9197314
| IS 1593 (2018) |
Fuel oils - Specification (Third Revision) |
Fuel Oils |
11550 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.2(Pour Point) |
- |
1900 |
|
- |
| 4.6-Table 1-v)(Density at 15°C kg/m3or Relative density at 15.6/15.6°C) |
- |
1140 |
|
- |
| 4.6-Table 1-vi)(Flash point (Pensky Martens (closed), °C, Min) |
- |
1900 |
|
- |
| 4.6-Table 1-ix)(Sulphur, total, percent by mass, Max2)) |
- |
2650 |
|
- |
| 4.6-Table 1-x)(Water content, percent by volume, Max) |
- |
1310 |
|
- |
| 4.6-Table 1-vii)(Kinematic viscosity in centistokes at 50°C) |
- |
2270 |
|
- |
| 4.6-Table 1-viii)(Sediment, percent by mass, Max) |
- |
1740 |
|
- |
|
12 Mar, 2029 |
-
- |
| 3810 |
Indian Oil Corporation (IOCL) Mathura Terminal Laboratory
| 9197314
| IS 15607 (2022) |
Biodiesel B-100 - Fatty Acid Methyl Esters FAME Specification Second Revision |
Biodiesel (B-100) fatty acid methyl ester |
13810.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.4-Table 1-ii)(Colour, visual) |
- |
200.00 |
|
- |
| 4.4-Table 1-i)(Appearance, visual) |
- |
200.00 |
|
- |
| 4.4-Table 1-iii)(Density at 15 °C, kg/m3) |
- |
1130.08 |
|
- |
| 4.4-Table 1-iv)(Kinematic viscosity at 40 °C, cSt) |
- |
1130.00 |
|
- |
| 4.4-Table 1-v)(Flash point (PMCC)1) °C, Min) |
- |
1900.00 |
|
- |
| 4.4-Table 1-vi)(Total Sulphur, mg/kg, Max) |
- |
4710.00 |
|
- |
| 4.4-Table 1-xxvi)(Cold filter plugging point (CFPP), °C Max
a) summer 18 – Part 110
b) winter3)) |
- |
2270.00 |
|
- |
| 4.4-Table 1-xi)(Copper strip corrosion, 3 h at 50 °C, Max) |
- |
1130.00 |
|
- |
| 4.4-Table 1-xiii)(Acid value, mg KOH/g, Max) |
- |
2270.00 |
|
- |
|
12 Mar, 2029 |
-
- |
