BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15303 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

3751

Excel Surveyors Pvt. Ltd., Kolkata

5135906

IS 18573 (2024)

Cold formed welded carbon steel square and rectangular hollow sections for mechanical, general engineering and decorative purposes ï¿½ Specification

Grade-YSt 160, YSt 210, Yst 240, YSt 310, YSt 355

7100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 3.0(Types)	-	300	-
Clause.4.0(Carbon)	-	200	-
Clause.4.0(Sulphur)	-	200	-
Clause.4.0(Sulphur)	-	200	-
Clause.4.0(Phosphorus)	-	200	-
Clause.4.0(Silicon)	-	200	-
Clause.4.0(Manganese)	-	200	-
Clause.5.0(Supply of Material)	-	0	Exclusion
Clause.5.0(Supply of Material)	-	0	Exclusion
Clause.6.0(Workmanship)	-	200	-
Clause.7.0(Straightness)	-	200	-
Clause.8.0(Basis of Calculation)	-	300	-
Clause.9.0(Length)	-	250	-
Clause.10.0(Dimensions and properties)	-	500	-
Clause.10.0(Dimensions and properties)	-	0	-
Clause.11.0(General)	-	200	-
Clause.11.0(Outside Dimension)	-	350	-
Clause.11.0(Thickness)	-	150	-
Clause.11.0(Thickness)	-	0	-
Clause.11.0(Concavity and Convexity)	-	300	-
Clause.11.0(Squareness of Sides)	-	200	-
Clause.11.0(External Corner Radiius)	-	200	-
Clause.11.0(Straightness and twist)	-	300	-
Clause.12.0(Dimension Tolerances)	-	350	-
Clause.12.0(Dimension Tolerances)	-	0	-
Clause.13.0(Surface Protection)	-	500	-
Clause.14.0(Testing)	-	0	-
Clause.15.0(Tensile test)	-	700	-
Clause.15.0(Yield strength)	-	0	-
Clause.15.0(Elognation Percent)	-	0	-
Clause.18.0(Marking)	-	200	-
6(Workmanship)	-	0	-
10(Dimensions and Properties)	-	0	-
11(Measurement of Shape and Size)	-	500	-
12(Dimensions and Tolerances)	-	0	-
13(Surface Protection)	-	0	-
15(Tensile Test)	-	0	-

31 Dec, 2026

-
Included w.e.f 01.09.2025

3752

EMC Testing and Compliance LLP, Gurugram

8141526

IS 302 : Part 2 : Sec 42 (2024)

Household and Similar Electrical Appliancesï¿½Safety Part 2 Particular Requirements Section 42 Commercial electric forced convection ovens, steam cookers and steam-convection ovens

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	1000	-
8(Protection against access to live parts)	-	2000	-
10(Power input and current)	-	2500	-
11(Heating)	-	2000	-
13.1 &13.2(Leakage current test)	-	2000	-
13.1 &13.3(Electric strength test)	-	2000	-
14(Transient overvoltages)	-	2000	-
15(Moisture resistance)	-	3000	-
15.3(Moisture resistance)	-	2000	-
15.101(Moisture resistance)	-	2000	-
16.1 &16.2(Leakage current test)	-	2000	-
16.1 & 16.3(Electric strength test)	-	2000	-
17(Overload protection of transformers and associated circuits)	-	2000	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	2000	-
19.101(Abnormal operation)	-	2000	-
20.1(Stability and mechanical hazards)	-	2000	-
20.2(Stability and mechanical hazards)	-	2000	-
20.101(Stability and mechanical hazards)	-	2000	-
20.102(Stability and mechanical hazards)	-	2000	-
21(Mechanical strength)	-	2000	-
21.101(Mechanical strength)	-	2000	-
22(Construction)	-	2000	For clause 22
22.101(Construction)	-	1000	-
22.102(Construction)	-	1000	-
22.103(Construction)	-	1000	-
22.104(Construction)	-	1000	-
22.105(Construction)	-	1000	-
22.106(Construction)	-	1000	-
22.107(Construction)	-	1000	-
22.108(Construction)	-	1000	-
22.109(Construction)	-	1000	-
22.109(Construction)	-	1000	-
22.110(Construction)	-	1000	-
22.111(Construction)	-	1000	-
22.112(Construction)	-	1000	-
22.113(Construction)	-	1000	-
22.114(Construction)	-	1000	-
22.115(Construction)	-	1000	-
22.116(Construction)	-	1000	-
22.117(Construction)	-	1000	-
22.118(Construction)	-	1000	-
22.119(Construction)	-	1000	-
23(Internal wiring)	-	2000	-
24(Components)	-	1000	-
25("Supply connection and external flexible cords")	-	2000	-
26("Terminals for external conductors")	-	2000	-
27(Provision for earthing)	-	2000	-
28(Screws and connections)	-	2000	-
29("Clearances, creepage distances and solid insulation")	-	2000	-
30(Resistance to heat and fire)	-	2000	-
30.101(Resistance to heat and fire)	-	2000	-
31(Resistance to rusting)	-	2000	-

19 Jul, 2027

-
" Included w.e.f 20.11.2025 Exclusion: 32 (""Radiation, toxicity and similar hazards"") Cl 24 (Components) 19.11.4.1 to 19.11.4.7(EMI/EMC)"

3753

Excel Surveyors Pvt. Ltd., Kolkata

5135906

IS 4923 (2017)

Hollow steel sections for structural use - Specification (Third Revision)

Grade-YSt 210, YSt 240, YSt 310, YSt 355, YSt 420, YSt 460

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.7.1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	(For chemical test, the testing charges will be 800/-)
Cl.7.1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.7.1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.7.1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.7.1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.7.1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.7.1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.7.1(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.7.1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.7.1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.7.1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.7.1(Carbon Equivalent-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Depth))	-	50	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Width))	-	50	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Thickness))	-	50	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Weigth))	-	50	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Area of Section))	-	50	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia))	-	50	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about X-X))	-	50	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about Y-Y))	-	50	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration))	-	50	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration about X-X))	-	50	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Radius of Gyration about Y-Y))	-	50	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Elastic Modulus))	-	50	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about X-X))	-	50	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about Y-Y))	-	50	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus))	-	50	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus about X-X))	-	50	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Plastic Modulus about Y-Y))	-	50	-
Cl. 10.1, 14.1, 18.1(Straightness)	-	100	-
Cl. 10.2, Fig 1(Outside dimension (B))	-	50	-
Cl. 10.2, Fig 1(Outside dimension (H))	-	50	-
Cl. 10.2, Fig 1(Outside dimension (T))	-	50	-
Cl. 10.4, Fig 2(Concavity, X1)	-	100	-
Cl. 10.4, Fig 2(Convexity, X2)	-	100	-
Cl. 10.5, Fig 3(Squareness of side)	-	100	-
Cl. 10.6, Fig 4(External Corner Radius)	-	100	-
Cl. 10.7, Fig 5(Total twist, V)	-	200	-
Cl. 15.2, Table 3(Tensile Strength- IS 1608)	-	300	-
Cl. 15.2, Table 3(Yield Strength- IS 1608)	-	0	-
Cl. 15.2, Table 3(Elongation- IS 1608)	-	0	-
Cl. 14.1(Exact Length)	-	50	-
Cl. 14.1(Random Length)	-	50	-
Cl. 14.1(Weight on individual length)	-	100	-
Cl. 14.1(Weight on lots of 10 tonnes min)	-	0	Exclusion
Cl. 18, Note 2(Internal Fin Height (Only for Cold Formed))	-	100	-
7(Micro Alloying elements(Nb+V+Ti))	-	300	-
7(Carbon equivalent as CE)	-	200	-
10.4(Concavity/Convexity-SOP MT-23)	-	300	-
10.5(Squareness of corner/Sides-SOP MT-23)	-	300	-
10.6("External corner Radius/ Radii of corners-outside - SOP MT-23")	-	200	-
11(Oiling & Painting - IS 4923)	-	300	-
18.1(Height of the internal weld fin - IS 4923)	-	100	-
10.3(Thickness - IS 4923)	-	100	-
13(Marking)	-	100	-
Cl-19(Mechanical Tests)	-	0	-

31 Dec, 2026

-
Included w.e.f 01.09.2025

3754

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 17514 (2025)

Reusable Sanitary Pad/Sanitary Napkin/Period Panties - Specification (First Revision)

All

17000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3.1(Material- cover or the top sheet)	-	1000	-
Cl-3.2(Material- absorbent core;)	-	1000	-
Cl-3.3(Material- bottom layer.)	-	1000	-
Cl-4(MANUFACTURE, WORKMANSHIP AND FINISH)	-	1000	-
Cl-5(FASTENING MECHANISM)	-	1000	-
Cl-6, Table-1(Length (mm) (Absorbent Core Only))	-	1000	-
Cl-6, Table-1(Width (mm) (Absorbent Core Only))	-	1000	-
Cl-7(WASHING, DRYING AND HANDLING INSTRUCTION)	-	1000	-
Cl-8, Table-2 (i) (a)("Colour fastness to rubbing: Dry ")	-	1000	-
Cl-8, Table-2 (i) (b)(Colour fastness to rubbing: Wet)	-	1000	-
Cl-8, Table-2 (ii) (a)("Colour fastness to perspiration (acidic and alkaline): Colour change ")	-	500	-
Cl-8, Table-2 (ii) (b)(Colour fastness to perspiration (acidic and alkaline): Staining)	-	500	-
Cl-8, Table-2 (iii) (a)(Colour fastness to washing: Colour change)	-	500	-
Cl-8, Table-2 (iii) (b)(Colour fastness to washing: Staining)	-	500	-
Cl-8, Table-2 (iv)("Dimensional stability to washing, percentage, Max Length and width")	-	500	-
Cl-9.1(pH Value)	-	500	-
Cl-9.2(Ability to Withstand Pressure after Absorption)	-	500	-
Cl-9.3(Hygiene Testing Requirement)	-	500	-
Cl-9.3.1(Bacterial and Fungal Bioburden)	-	500	-
Cl-9.3.2(Test for Common Skin Pathogen — Staphylococcus Aureus)	-	500	-
Cl-9.3.3(Good Manufacturing Practice Guideline for Hygiene Requirement)	-	500	-
Cl-9.4(Biocompatibility Evaluation — Cytotoxicity, Irritation and Skin Sensitization)	-	0	-
Cl-9.5(Phthalate Test)	-	500	-
Cl-12(Marking)	-	500	-
Cl-10(Anti-bacterial activity value)	-	500	-
Cl-3.1(Material- cover or the top sheet)	-	0	-
Cl-3.2(Material- absorbent core;)	-	0	-
Cl-3.3(Material- bottom layer.)	-	0	-
Cl-4(MANUFACTURE, WORKMANSHIP AND FINISH)	-	0	-
Cl-5(FASTENING MECHANISM)	-	0	-
Cl-6, Table-1(Length (mm) (Absorbent Core Only))	-	0	-
Cl-6, Table-1(Width (mm) (Absorbent Core Only))	-	0	-
Cl-7(WASHING, DRYING AND HANDLING INSTRUCTION)	-	0	-
Cl-8, Table-2 (i) (a)("Colour fastness to rubbing: Dry ")	-	0	-
Cl-8, Table-2 (i) (b)(Colour fastness to rubbing: Wet)	-	0	-
Cl-8, Table-2 (ii) (a)("Colour fastness to perspiration (acidic and alkaline): Colour change ")	-	0	-
Cl-8, Table-2 (ii) (b)(Colour fastness to perspiration (acidic and alkaline): Staining)	-	0	-
Cl-8, Table-2 (iii) (a)(Colour fastness to washing: Colour change)	-	0	-
Cl-8, Table-2 (iii) (b)(Colour fastness to washing: Staining)	-	0	-
Cl-8, Table-2 (iv)("Dimensional stability to washing, percentage, Max Length and width")	-	0	-
Cl-9.1(pH Value)	-	0	-
Cl-9.2(Ability to Withstand Pressure after Absorption)	-	0	-
Cl-9.3(Hygiene Testing Requirement)	-	0	-
Cl-9.3.1(Bacterial and Fungal Bioburden)	-	0	-
Cl-9.3.2(Test for Common Skin Pathogen — Staphylococcus Aureus)	-	0	-
Cl-9.3.3(Good Manufacturing Practice Guideline for Hygiene Requirement)	-	0	-
Cl-9.4(Biocompatibility Evaluation — Cytotoxicity, Irritation and Skin Sensitization)	-	0	-
Cl-9.5(Phthalate Test)	-	0	-
Cl-12(Marking)	-	0	-
Cl-10(Anti-bacterial activity value)	-	0	-
Cl-3.1(Material- cover or the top sheet)	-	0	-
Cl-3.2(Material- absorbent core;)	-	0	-
Cl-3.3(Material- bottom layer.)	-	0	-
Cl-4(MANUFACTURE, WORKMANSHIP AND FINISH)	-	0	-
Cl-5(FASTENING MECHANISM)	-	0	-
Cl-6, Table-1(Length (mm) (Absorbent Core Only))	-	0	-
Cl-6, Table-1(Width (mm) (Absorbent Core Only))	-	0	-
Cl-7(WASHING, DRYING AND HANDLING INSTRUCTION)	-	0	-
Cl-8, Table-2 (i) (a)("Colour fastness to rubbing: Dry ")	-	0	-
Cl-8, Table-2 (i) (b)(Colour fastness to rubbing: Wet)	-	0	-
Cl-8, Table-2 (ii) (a)("Colour fastness to perspiration (acidic and alkaline): Colour change ")	-	0	-
Cl-8, Table-2 (ii) (b)(Colour fastness to perspiration (acidic and alkaline): Staining)	-	0	-
Cl-8, Table-2 (iii) (a)(Colour fastness to washing: Colour change)	-	0	-
Cl-8, Table-2 (iii) (b)(Colour fastness to washing: Staining)	-	0	-
Cl-8, Table-2 (iv)("Dimensional stability to washing, percentage, Max Length and width")	-	0	-
Cl-9.1(pH Value)	-	0	-
Cl-9.2(Ability to Withstand Pressure after Absorption)	-	0	-
Cl-9.3(Hygiene Testing Requirement)	-	0	-
Cl-9.3.1(Bacterial and Fungal Bioburden)	-	0	-
Cl-9.3.2(Test for Common Skin Pathogen — Staphylococcus Aureus)	-	0	-
Cl-9.3.3(Good Manufacturing Practice Guideline for Hygiene Requirement)	-	0	-
Cl-9.4(Biocompatibility Evaluation — Cytotoxicity, Irritation and Skin Sensitization)	-	0	-
Cl-9.5(Phthalate Test)	-	0	-
Cl-12(Marking)	-	0	-
Cl-10(Anti-bacterial activity value)	-	0	-
Cl-3.1(Material- cover or the top sheet)	-	-	-
Cl-3.2(Material- absorbent core;)	-	-	-
Cl-3.3(Material- bottom layer.)	-	-	-
Cl-4(MANUFACTURE, WORKMANSHIP AND FINISH)	-	-	-
Cl-5(FASTENING MECHANISM)	-	-	-
Cl-6, Table-1(Length (mm) (Absorbent Core Only))	-	-	-
Cl-6, Table-1(Width (mm) (Absorbent Core Only))	-	-	-
Cl-7(WASHING, DRYING AND HANDLING INSTRUCTION)	-	-	-
Cl-8, Table-2 (i) (a)("Colour fastness to rubbing: Dry ")	-	-	-
Cl-8, Table-2 (i) (b)(Colour fastness to rubbing: Wet)	-	-	-
Cl-8, Table-2 (ii) (a)("Colour fastness to perspiration (acidic and alkaline): Colour change ")	-	-	-
Cl-8, Table-2 (ii) (b)(Colour fastness to perspiration (acidic and alkaline): Staining)	-	-	-
Cl-8, Table-2 (iii) (a)(Colour fastness to washing: Colour change)	-	-	-
Cl-8, Table-2 (iii) (b)(Colour fastness to washing: Staining)	-	-	-
Cl-8, Table-2 (iv)("Dimensional stability to washing, percentage, Max Length and width")	-	-	-
Cl-9.1(pH Value)	-	-	-
Cl-9.2(Ability to Withstand Pressure after Absorption)	-	-	-
Cl-9.3(Hygiene Testing Requirement)	-	-	-
Cl-9.3.1(Bacterial and Fungal Bioburden)	-	-	-
Cl-9.3.2(Test for Common Skin Pathogen — Staphylococcus Aureus)	-	-	-
Cl-9.3.3(Good Manufacturing Practice Guideline for Hygiene Requirement)	-	-	-
Cl-9.4(Biocompatibility Evaluation — Cytotoxicity, Irritation and Skin Sensitization)	-	-	-
Cl-9.5(Phthalate Test)	-	-	-
Cl-12(Marking)	-	-	-
Cl-10(Anti-bacterial activity value)	-	-	-

08 May, 2028

-
Included w.e.f 16.09.2025 Excluding: Cl-9.4 (Biocompatibility Evaluation — Cytotoxicity, Irritation and Skin Sensitization)

3755

GLOBAL COMPLIANCE LABORATORY INDIA, GHAZIABAD

5172706

IS 302 : Part 2 : Sec 13 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 13 frying pans, deep fat fryers and similar appliances

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
32(Radiation ,Toxicity and similar hazards)	-	3000	-
31(Resistance to Rusting)	-	3000	-
30(Resistance to Heat, Fire and Tracking)	-	3000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	3000	-
28(Screws & Connections)	-	3000	-
27(Provision For Earthing)	-	3000	-
26(Terminals For External Conductors)	-	3000	-
25(Supply Connection & External Flexible Cables and Cords)	-	3000	-
23(Internal wiring)	-	3000	-
22(Construction)	-	3000	-
21(Mechanical strength)	-	3000	-
20(Stability & Mechanical Hazards)	-	3000	-
19(Abnormal Operation)	-	3000	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	3000	-
16(Leakage Current and Electric Strength)	-	3000	-
15(Moisture Resistance)	-	3000	-
14(Transient Over Voltage)	-	3000	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	3000	-
11(Temperature Rise/Heating)	-	3000	-
10(Power Input)	-	3000	-
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	3000	-
7(Marking/ Marking & Instructions)	-	3000	-
6(Classification)	-	3000	-
5(Rating)	-	3000	-
31(Resistance to Rusting)	-	3000	-
30(Resistance to Heat, Fire and Tracking)	-	3000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	3000	-
28(Screws & Connections)	-	3000	-
27(Provision For Earthing)	-	3000	-
26(Terminals For External Conductors)	-	3000	-
25(Supply Connection & External Flexible Cables and Cords)	-	3000	-
23(Internal wiring)	-	3000	-
22(Construction)	-	3000	-
21(Mechanical strength)	-	3000	-
20(Stability & Mechanical Hazards)	-	3000	-
19(Abnormal Operation)	-	3000	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	3000	-
16(Leakage Current and Electric Strength)	-	3000	-
15(Moisture Resistance)	-	3000	-
14(Transient Over Voltage)	-	3000	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	3000	-
11(Temperature Rise/Heating)	-	3000	-
10(Power Input)	-	3000	-
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	3000	-
7(Marking/ Marking & Instructions)	-	3000	-
6(Classification)	-	3000	-
5(Rating)	-	3000	-
32(Radiation ,Toxicity and similar hazards)	-	3000	-

20 Jun, 2029

-
Included w.e.f. 04.11.2025 Exclusion: "18 (Endurance) 19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.4 (Surge immunity test) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Harmonics) 24 (Components) 9 (Starting Of Motor Operated Appliances) "

3756

Excel Surveyors Pvt. Ltd., Kolkata

5135906

IS 10748 (2004)

Hot - Rolled steel strip for welded tubes and pipes - Specification (Second Revision)

Grade-1,2,3,4,5,6

4900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8 & Table 3(UTM)	-	500	-
Cl 9(Press)	-	500	-
Cl 11(Workmanship)	-	200	-
Cl 12 & 13(Length, Width & Thickness)	-	300	-
Cl 8 & Table 3(UTM)	-	0	-
Cl 9(Press)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 12 & 13(Length, Width & Thickness)	-	0	-
Cl 8 & Table 3(UTM)	-	0	-
Cl 9(Press)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 12 & 13(Length, Width & Thickness)	-	0	-
7.1(Carbon %)	-	50	-
7.1(Manganese %)	-	50	-
7.1(Phosphorus %)	-	50	-
7.1(Sulphur %)	-	50	-
7.1(Silicon %)	-	50	-
7.1( Copper %)	-	50	-
7.1( Aluminium %)	-	50	-
7.1( Nb)	-	50	-
7.1(V)	-	50	-
7.1( Ti)	-	50	-
7.1(Cr)	-	50	-
7.1(Mo)	-	50	-
7.1(Ni)	-	50	-
7.1( Nitrogen%)	-	50	-
7.1(CE)	-	50	-
7.1(Carbon %)	-	0	-
7.1(Manganese %)	-	0	-
7.1(Phosphorus %)	-	0	-
7.1(Sulphur %)	-	0	-
7.1(Silicon %)	-	0	-
7.1( Copper %)	-	0	-
7.1( Aluminium %)	-	0	-
7.1( Nb)	-	0	-
7.1(V)	-	0	-
7.1( Ti)	-	0	-
7.1(Cr)	-	0	-
7.1(Mo)	-	0	-
7.1(Ni)	-	0	-
7.1( Nitrogen%)	-	0	-
7.1(CE)	-	0	-
7.1(Carbon %)	-	0	-
7.1(Manganese %)	-	0	-
7.1(Phosphorus %)	-	0	-
7.1(Sulphur %)	-	0	-
7.1(Silicon %)	-	0	-
7.1( Copper %)	-	0	-
7.1( Aluminium %)	-	0	-
7.1( Nb)	-	0	-
7.1(V)	-	0	-
7.1( Ti)	-	0	-
7.1(Cr)	-	0	-
7.1(Mo)	-	0	-
7.1(Ni)	-	0	-
7.1( Nitrogen%)	-	0	-
7.1(CE)	-	0	-
Table 1 ( Clauses 7.1 ,7.2 )(TITANIUM)	-	0	-
Table 1 ( Clauses 7.1 ,7.2 )(VANADIUM)	-	0	-
Table 1 ( Clauses 7.1 ,7.2 )(NIOBIUM)	-	0	-
Table 1 ( Clauses 7.1 ,7.2 )(CARBON EQUIVELENT )	-	50	-
Table 1 ( Clauses 7.1 ,7.2 )(Molybdenum)	-	0	-
Table 1 ( Clauses 7.1 ,7.2 )(Chromium)	-	0	-
Table 1 ( Clauses 7.1 ,7.2 )(Nickel)	-	0	-
Table 1 ( Clauses 7.1 ,7.2 )( ALUMINIUM)	-	0	-
Table 1 ( Clauses 7.1 ,7.2 )(SILICON)	-	0	-
Table 1 ( Clauses 7.1 ,7.2 )(NITROGEN)	-	0	-
Table 1 ( Clauses 7.1 ,7.2 )(MANGANESE)	-	0	-
Table 1 ( Clauses 7.1 ,7.2 )(PHOSPHURS)	-	0	-
Table 1 ( Clauses 7.1 ,7.2 )(SULPHUR)	-	0	-
Table 1 ( Clauses 7.1 ,7.2 )( CARBON)	-	0	-
Cl. 14(Weight)	-	300	-
Cl. 12, 13(Camber)	-	300	-
Cl. 12, 13(Thickness)	-	100	-
Cl. 8, Table 3(Elongation)	-	0	-
Cl. 8, Table 3(Yield Stress)	-	0	-
Cl 12 & 13(Length, Width & Thickness)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 9(Press)	-	0	-
Cl 8 & Table 3(UTM)	-	0	-
Cl 8 & Table 3(UTM)	-	0	-
Cl 9(Press)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 12 & 13(Length, Width & Thickness)	-	0	-
7.0 (7)(Micro Alloying elements - IS:8811)	-	300	-
8.0 (1)(Tensile Strength-IS:1608(P1))	-	0	-
8.0 (2)(Yield Strength-IS:1608(P1))	-	0	-
8.0 (3)(Elongation on 5.65 SoA GL-IS:1608(P1))	-	0	-
12 (1)(Width - SOP MT-23)	-	0	-
12 (2)(Thickness- SOP MT-23)	-	0	-
12 (3)(Mass of Strip- SOP MT-23)	-	200	-
15.0 & 15.1(Coil edges - IS:10748)	-	100	-
15.0 & 15.2(Surface finish - IS:10748)	-	200	-
15.0 & 15.5(Telescopicity - IS:10748)	-	200	-
15(Condition of Coil)	-	100	-
16(Marking)	-	100	-
3.4(Vehicle Fuel System)	-	200	-
9(Protective Treatment)	-	200	-
Table 1 ( Clauses 7.1 ,7.2 )(Tungsten (W))	-	50	-
Table 1 ( Clauses 7.1 ,7.2 )(Boron (B))	-	50	-
CL 12(Average Width (04))	-	100	-
CL 12(Average Thickness (08))	-	100	-
Cl 8 & Table 3(UTM)	-	-	-
Cl 9(Press)	-	-	-
Cl 11(Workmanship)	-	-	-
Cl 12 & 13(Length, Width & Thickness)	-	-	-
Cl 8 & Table 3(UTM)	-	-	-
Cl 9(Press)	-	-	-
Cl 11(Workmanship)	-	-	-
Cl 12 & 13(Length, Width & Thickness)	-	-	-
Cl 8 & Table 3(UTM)	-	-	-
Cl 9(Press)	-	-	-
Cl 11(Workmanship)	-	-	-
Cl 12 & 13(Length, Width & Thickness)	-	-	-
7.1(Carbon %)	-	-	-
7.1(Manganese %)	-	-	-
7.1(Phosphorus %)	-	-	-
7.1(Sulphur %)	-	-	-
7.1(Silicon %)	-	-	-
7.1( Copper %)	-	-	-
7.1( Aluminium %)	-	-	-
7.1( Nb)	-	-	-
7.1(V)	-	-	-
7.1( Ti)	-	-	-
7.1(Cr)	-	-	-
7.1(Mo)	-	-	-
7.1(Ni)	-	-	-
7.1( Nitrogen%)	-	-	-
7.1(CE)	-	-	-
7.1(Carbon %)	-	-	-
7.1(Manganese %)	-	-	-
7.1(Phosphorus %)	-	-	-
7.1(Sulphur %)	-	-	-
7.1(Silicon %)	-	-	-
7.1( Copper %)	-	-	-
7.1( Aluminium %)	-	-	-
7.1( Nb)	-	-	-
7.1(V)	-	-	-
7.1( Ti)	-	-	-
7.1(Cr)	-	-	-
7.1(Mo)	-	-	-
7.1(Ni)	-	-	-
7.1( Nitrogen%)	-	-	-
7.1(CE)	-	-	-
7.1(Carbon %)	-	-	-
7.1(Manganese %)	-	-	-
7.1(Phosphorus %)	-	-	-
7.1(Sulphur %)	-	-	-
7.1(Silicon %)	-	-	-
7.1( Copper %)	-	-	-
7.1( Aluminium %)	-	-	-
7.1( Nb)	-	-	-
7.1(V)	-	-	-
7.1( Ti)	-	-	-
7.1(Cr)	-	-	-
7.1(Mo)	-	-	-
7.1(Ni)	-	-	-
7.1( Nitrogen%)	-	-	-
7.1(CE)	-	-	-
Cl. 14(Weight)	-	-	-
Cl. 12, 13(Camber)	-	-	-
Cl. 12, 13(Thickness)	-	-	-
Cl. 8, Table 3(Elongation)	-	-	-
Cl. 8, Table 3(Yield Stress)	-	-	-
Cl 12 & 13(Length, Width & Thickness)	-	-	-
Cl 11(Workmanship)	-	-	-
Cl 9(Press)	-	-	-
Cl 8 & Table 3(UTM)	-	-	-
Cl 8 & Table 3(UTM)	-	-	-
Cl 9(Press)	-	-	-
Cl 11(Workmanship)	-	-	-
Cl 12 & 13(Length, Width & Thickness)	-	-	-
7.0 (7)(Micro Alloying elements - IS:8811)	-	-	-
8.0 (1)(Tensile Strength-IS:1608(P1))	-	-	-
8.0 (2)(Yield Strength-IS:1608(P1))	-	-	-
8.0 (3)(Elongation on 5.65 SoA GL-IS:1608(P1))	-	-	-
12 (1)(Width - SOP MT-23)	-	-	-
12 (2)(Thickness- SOP MT-23)	-	-	-
12 (3)(Mass of Strip- SOP MT-23)	-	-	-
15.0 & 15.1(Coil edges - IS:10748)	-	-	-
15.0 & 15.2(Surface finish - IS:10748)	-	-	-
15.0 & 15.5(Telescopicity - IS:10748)	-	-	-
15(Condition of Coil)	-	-	-
16(Marking)	-	-	-
3.4(Vehicle Fuel System)	-	-	-
9(Protective Treatment)	-	-	-
Table 1 ( Clauses 7.1 ,7.2 )(Tungsten (W))	-	-	-
Table 1 ( Clauses 7.1 ,7.2 )(Boron (B))	-	-	-
CL 12(Average Width (04))	-	-	-
CL 12(Average Thickness (08))	-	-	-

31 Dec, 2026

-
Included w.e.f. 04.09.2025

3757

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 18163 (2023)

Textiles Light weight jute sacking bags for packing 35 kg groundnut with shell Specification

All

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Manufacture)	-	890	-
4.1.1(Manufacture)	-	890	-
4.2(Seam)	-	890	-
4.2(Seam)	-	890	-
4.2(Seam)	-	890	-
Cl-4.2(Seam)	-	890	-
Cl-4.3(Safety Stitch)	-	890	-
Cl-7(Marking)	-	890	-
Cl-4.4(Hemming at the Mouth)	-	890	-
4.4(Hemming at the Mouth)	-	890	-
Cl-4.5(Freedom from Defects)	-	890	-
Cl-5.2, Table 2 (i)(Total number of bags per bale)	-	890	-
Cl-5.2, Table 2 (ii)(Number of bags per bundle)	-	890	-
Cl-5.2, Table 2 (iii)(Contract mass of a bale, kg)	-	890	-
Cl-5.2, Table 2 (iv)(Corrected net mass of a bale, kg)	-	890	-
Cl-5.2, Table 2 (v)(Number of joined bags per bundle of 25 bags)	-	890	-
Cl-5.3(contract moisture regain)	-	890	-
Cl-5.4.2(Additional Requirements for Labelling as Environment Friendly Products (Optional)- Specific Requirements)	-	890	-
Cl-4.1.1 & 5.1, Table 1, i (a)(Dimensions-Outside length, cm)	-	890	-
Cl-4.1.1 & 5.1, Table 1, i (b)(Dimensions- Outside width, cm)	-	890	-
Cl-4.1.1 & 5.1, Table 1 (ii)(Ends/dm)	-	890	-
Cl-4.1.1 & 5.1, Table 1, iii(Picks/dm)	-	890	-
Cl-4.1.1 & 5.1, Table 1, iv(Corrected mass/bag, g, percent)	-	890	-
Cl-4.1.1 & 5.1, Table 1, v (a)(Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): - Warp way)	-	890	-
Cl-4.1.1 & 5.1, Table 1, v (b)(Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): - Weft way)	-	890	-
Cl-4.1.1 & 5.1, Table 1, vi(Average seam strength (5 cm × 20 cm ravelled strip), Min, N (kgf))	-	890	-
Cl-4.1.1 & 5.1, Table 1, vii(Moisture regain, percent, Max)	-	890	-
Cl-4.1.1 & 5.1, Table 1, viii(Oil content on dry de-oiled material, Max)	-	890	-
Cl-4.1(Manufacture)	-	890	-
4.1.1(Manufacture)	-	890	-
4.2(Seam)	-	890	-
4.2(Seam)	-	890	-
4.2(Seam)	-	890	-
Cl-4.2(Seam)	-	890	-
Cl-4.3(Safety Stitch)	-	890	-
Cl-7(Marking)	-	890	-
Cl-4.4(Hemming at the Mouth)	-	890	-
4.4(Hemming at the Mouth)	-	890	-
Cl-4.5(Freedom from Defects)	-	890	-
Cl-5.2, Table 2 (i)(Total number of bags per bale)	-	890	-
Cl-5.2, Table 2 (ii)(Number of bags per bundle)	-	890	-
Cl-5.2, Table 2 (iii)(Contract mass of a bale, kg)	-	890	-
Cl-5.2, Table 2 (iv)(Corrected net mass of a bale, kg)	-	890	-
Cl-5.2, Table 2 (v)(Number of joined bags per bundle of 25 bags)	-	890	-
Cl-5.3(contract moisture regain)	-	890	-
Cl-5.4.2(Additional Requirements for Labelling as Environment Friendly Products (Optional)- Specific Requirements)	-	890	-
Cl-4.1.1 & 5.1, Table 1, i (a)(Dimensions-Outside length, cm)	-	890	-
Cl-4.1.1 & 5.1, Table 1, i (b)(Dimensions- Outside width, cm)	-	890	-
Cl-4.1.1 & 5.1, Table 1 (ii)(Ends/dm)	-	890	-
Cl-4.1.1 & 5.1, Table 1, iii(Picks/dm)	-	890	-
Cl-4.1.1 & 5.1, Table 1, iv(Corrected mass/bag, g, percent)	-	890	-
Cl-4.1.1 & 5.1, Table 1, v (a)(Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): - Warp way)	-	890	-
Cl-4.1.1 & 5.1, Table 1, v (b)(Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): - Weft way)	-	890	-
Cl-4.1.1 & 5.1, Table 1, vi(Average seam strength (5 cm × 20 cm ravelled strip), Min, N (kgf))	-	890	-
Cl-4.1.1 & 5.1, Table 1, vii(Moisture regain, percent, Max)	-	890	-
Cl-4.1.1 & 5.1, Table 1, viii(Oil content on dry de-oiled material, Max)	-	890	-

08 May, 2028

-
Included w.e.f. 01.09.2025

3758

Atckon Laboratories LLP, Bahadurgarh

8186436

IS 2494 : Part 2 (1993)

V - Belts - Endless V - Belts for industrial purposes: Part 2 fire resistant and antistatic V - Belts - Specification

ALL

35400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Fire Resistant Antistatic V-belts)	-	35400	-
3.2(Antistatic V-belts)	-	35400	-
5(Requirements)	-	35400	-
7.1(Fire Resistance Test)	-	35400	-
7.2(Electrical Resistance Test)	-	35400	-
7.3(Tensile Test)	-	35400	-
8(Designation)	-	35400	-
9(Marking)	-	35400	-

-
Included w.e.f.26.08.2025

3759

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 4246 (2025)

DOMESTIC GAS STOVE AND BUILT IN HOB FOR USE WITH LPG SPECIFICATION (Sixth Revision )

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(General - IS 4246 : 2025)	-	500	-
4.1(General - IS 4246 : 2025)	-	0	-
4.1.1(General - IS 4246 : 2025)	-	0	-
5(Materials - Cl. 5 of IS 5116)	-	1000	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1(Materials - IS 5116)	-	0	-
5.1(Materials - IS 5116)	-	0	-
5.1.1(Materials - IS 5116)	-	0	-
5.1.1(Materials - IS 5116)	-	500	-
5.2(Materials - IS 5116)	-	0	-
5.2(Materials - IS 5116)	-	1000	-
5.3(Materials - IS 5116)	-	500	-
5.5(Materials - IS 5116)	-	500	-
5.5(Materials - IS 5116)	-	0	-
5.5(Materials - IS 5116)	-	0	-
5.7(Materials - IS 5116)	-	500	-
6.1(Design for Maintainance)	-	500	-
6.1(Design for Maintainance)	-	0	-
6.2(Design for Maintainance)	-	0	-
6.2(Design for Maintainance)	-	0	-
6.3(Design for Maintainance)	-	0	-
6.4(Design for Maintainance)	-	0	-
6.5(Design for Maintainance)	-	0	-
6.6(Design for Maintainance)	-	0	-
7.0(Rigidity and Stability)	-	500	-
7.1(Rigidity and Stability)	-	0	-
7.2(Rigidity and Stability)	-	0	-
7.3(Rigidity and Stability)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.2(Workmanship and Finish -)	-	500	-
8.3(Workmanship and Finish -)	-	800	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	900	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
10(Injector Jets)	-	900	-
10(Injector Jets)	-	0	-
10(Injector Jets)	-	0	-
10(Injector Jets)	-	0	-
10(Injector Jets)	-	0	-
10(Injector Jets)	-	0	-
11.1(Burners- Cl. 10 of IS 5116)	-	0	-
11.1(Burners- Cl. 10 of IS 5116)	-	700	-
11.1(Burners- Cl. 10 of IS 5116)	-	0	-
11.1(Burners- Cl. 10 of IS 5116)	-	0	-
11.1(Burners- Cl. 10 of IS 5116)	-	0	-
11.2(Burners)	-	0	-
11.3(Burners)	-	0	-
11.4(Burners)	-	0	-
12.1(Burner Pan Support)	-	700	-
12.2(Burner Pan Support)	-	0	-
12.3(Burner Pan Support)	-	0	-
13.1(Gas Soundness Test - Cl. 16 of IS 5116)	-	700	-
13,2(Gas Soundness Test)	-	0	-
13.2(Gas Leak Detector)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	900	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.2(Gas Inlet Connection)	-	500	-
14.2(Gas Inlet Connection)	-	0	-
14.2(Gas Inlet Connection)	-	0	-
14.2(Gas Inlet Connection)	-	0	-
14.3(Gas Inlet Connection)	-	0	-
14.4(Gas Inlet Connection)	-	0	-
14.5(Gas Inlet Connection - Cl. 17.3 of IS 5116)	-	0	-
14.6(Gas Inlet Connection)	-	0	-
15.0(Strength and Rigidity)	-	600	-
15.0(Strength and Rigidity)	-	0	-
15.0(Strength and Rigidity)	-	0	-
15.0(Strength and Rigidity)	-	0	-
17.0(Gas Consumption Test)	-	1200	-
17.0(Gas Consumption Test)	-	0	-
17.0(Gas Consumption Test)	-	0	-
17.0(Gas Consumption Test)	-	0	-
17.0(Gas Consumption Test)	-	0	-
17.0(Gas Consumption Test)	-	0	-
17.2(Gas Consumption Test - For Gas Stoves)	-	0	-
17.2 (a)(Gas Consumption Test - For Gas Stoves)	-	0	-
17.2 (b)(Gas Consumption Test - For Gas Stoves)	-	0	-
17.2 (c)(Gas Consumption Test - For Gas Stoves)	-	0	-
17.3(Gas Consumption Test - For Built in Hobs)	-	0	-
17.3.1(Gas Consumption Test - For Built in Hobs)	-	0	-
17.3.2(Gas Consumption Test - For Built in Hobs)	-	0	-
18.1(Ignition and Flame Travel)	-	1000	-
18.1(Ignition and Flame Travel)	-	0	-
18.2(Ignition and Flame Travel)	-	0	-
18.3(Ignition and Flame Travel)	-	0	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	0	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	0	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	0	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	0	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	0	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	0	-
19.1(Flame Stability)	-	500	-
19.1.1(Flame Stability)	-	0	-
19.2(Flame Stability)	-	0	-
19.3(Flame Stability)	-	0	-
20(Noise Control)	-	500	-
21(Flash Back)	-	500	-
22(Formation of Soot)	-	500	-
23(Resistance to Draught)	-	500	-
24.1(Combustion)	-	500	-
24.1(Combustion)	-	0	-
24.2(Combustion)	-	0	-
25.1(Fire Hazard and Limiting Temperatures)	-	1000	-
25.1(Fire Hazard and Limiting Temperatures)	-	0	-
25.1(Fire Hazard and Limiting Temperatures)	-	0	-
25.1(Fire Hazard and Limiting Temperatures)	-	0	-
25.2(Fire Hazard and Limiting Temperatures)	-	0	-
26.1(Thermal Efficiency- Gas Stoves)	-	2000	-
26.1(Thermal Efficiency- Gas Stoves)	-	0	-
26.1(Thermal Efficiency- Gas Stoves)	-	0	-
26.1(Thermal Efficiency- Gas Stoves)	-	0	-
26.1(Thermal Efficiency- Gas Stoves)	-	0	-
26.2(Thermal Efficiency- For Built in Hobs)	-	0	-
26.2(Thermal Efficiency- For Built in Hobs)	-	0	-
26.2(Thermal Efficiency- For Built in Hobs)	-	0	-
26.2(Thermal Efficiency- For Built in Hobs)	-	0	-
26.2(Thermal Efficiency- For Built in Hobs)	-	0	-
4.1(General - IS 4246 : 2025)	-	-	-
4.1(General - IS 4246 : 2025)	-	-	-
4.1.1(General - IS 4246 : 2025)	-	-	-
5(Materials - Cl. 5 of IS 5116)	-	-	-
5.1.1(Materials - Toughened glass, if provided,)	-	-	-
5.1.1(Materials - Toughened glass, if provided,)	-	-	-
5.1.1(Materials - Toughened glass, if provided,)	-	-	-
5.1.1(Materials - Toughened glass, if provided,)	-	-	-
5.1.1(Materials - Toughened glass, if provided,)	-	-	-
5.1.1(Materials - Toughened glass, if provided,)	-	-	-
5.1.1(Materials - Toughened glass, if provided,)	-	-	-
5.1.1(Materials - Toughened glass, if provided,)	-	-	-
5.1.1(Materials - Toughened glass, if provided,)	-	-	-
5.1(Materials - IS 5116)	-	-	-
5.1(Materials - IS 5116)	-	-	-
5.1.1(Materials - IS 5116)	-	-	-
5.1.1(Materials - IS 5116)	-	-	-
5.2(Materials - IS 5116)	-	-	-
5.2(Materials - IS 5116)	-	-	-
5.3(Materials - IS 5116)	-	-	-
5.5(Materials - IS 5116)	-	-	-
5.5(Materials - IS 5116)	-	-	-
5.5(Materials - IS 5116)	-	-	-
5.7(Materials - IS 5116)	-	-	-
6.1(Design for Maintainance)	-	-	-
6.1(Design for Maintainance)	-	-	-
6.2(Design for Maintainance)	-	-	-
6.2(Design for Maintainance)	-	-	-
6.3(Design for Maintainance)	-	-	-
6.4(Design for Maintainance)	-	-	-
6.5(Design for Maintainance)	-	-	-
6.6(Design for Maintainance)	-	-	-
7.0(Rigidity and Stability)	-	-	-
7.1(Rigidity and Stability)	-	-	-
7.2(Rigidity and Stability)	-	-	-
7.3(Rigidity and Stability)	-	-	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	-	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	-	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	-	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	-	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	-	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	-	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	-	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	-	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	-	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	-	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	-	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	-	-
8.2(Workmanship and Finish -)	-	-	-
8.3(Workmanship and Finish -)	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
10(Injector Jets)	-	-	-
10(Injector Jets)	-	-	-
10(Injector Jets)	-	-	-
10(Injector Jets)	-	-	-
10(Injector Jets)	-	-	-
10(Injector Jets)	-	-	-
11.1(Burners- Cl. 10 of IS 5116)	-	-	-
11.1(Burners- Cl. 10 of IS 5116)	-	-	-
11.1(Burners- Cl. 10 of IS 5116)	-	-	-
11.1(Burners- Cl. 10 of IS 5116)	-	-	-
11.1(Burners- Cl. 10 of IS 5116)	-	-	-
11.2(Burners)	-	-	-
11.3(Burners)	-	-	-
11.4(Burners)	-	-	-
12.1(Burner Pan Support)	-	-	-
12.2(Burner Pan Support)	-	-	-
12.3(Burner Pan Support)	-	-	-
13.1(Gas Soundness Test - Cl. 16 of IS 5116)	-	-	-
13,2(Gas Soundness Test)	-	-	-
13.2(Gas Leak Detector)	-	-	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	-	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	-	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	-	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	-	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	-	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	-	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	-	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	-	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	-	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	-	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	-	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	-	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	-	-
14.2(Gas Inlet Connection)	-	-	-
14.2(Gas Inlet Connection)	-	-	-
14.2(Gas Inlet Connection)	-	-	-
14.2(Gas Inlet Connection)	-	-	-
14.3(Gas Inlet Connection)	-	-	-
14.4(Gas Inlet Connection)	-	-	-
14.5(Gas Inlet Connection - Cl. 17.3 of IS 5116)	-	-	-
14.6(Gas Inlet Connection)	-	-	-
15.0(Strength and Rigidity)	-	-	-
15.0(Strength and Rigidity)	-	-	-
15.0(Strength and Rigidity)	-	-	-
15.0(Strength and Rigidity)	-	-	-
17.0(Gas Consumption Test)	-	-	-
17.0(Gas Consumption Test)	-	-	-
17.0(Gas Consumption Test)	-	-	-
17.0(Gas Consumption Test)	-	-	-
17.0(Gas Consumption Test)	-	-	-
17.0(Gas Consumption Test)	-	-	-
17.2(Gas Consumption Test - For Gas Stoves)	-	-	-
17.2 (a)(Gas Consumption Test - For Gas Stoves)	-	-	-
17.2 (b)(Gas Consumption Test - For Gas Stoves)	-	-	-
17.2 (c)(Gas Consumption Test - For Gas Stoves)	-	-	-
17.3(Gas Consumption Test - For Built in Hobs)	-	-	-
17.3.1(Gas Consumption Test - For Built in Hobs)	-	-	-
17.3.2(Gas Consumption Test - For Built in Hobs)	-	-	-
18.1(Ignition and Flame Travel)	-	-	-
18.1(Ignition and Flame Travel)	-	-	-
18.2(Ignition and Flame Travel)	-	-	-
18.3(Ignition and Flame Travel)	-	-	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	-	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	-	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	-	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	-	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	-	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	-	-
19.1(Flame Stability)	-	-	-
19.1.1(Flame Stability)	-	-	-
19.2(Flame Stability)	-	-	-
19.3(Flame Stability)	-	-	-
20(Noise Control)	-	-	-
21(Flash Back)	-	-	-
22(Formation of Soot)	-	-	-
23(Resistance to Draught)	-	-	-
24.1(Combustion)	-	-	-
24.1(Combustion)	-	-	-
24.2(Combustion)	-	-	-
25.1(Fire Hazard and Limiting Temperatures)	-	-	-
25.1(Fire Hazard and Limiting Temperatures)	-	-	-
25.1(Fire Hazard and Limiting Temperatures)	-	-	-
25.1(Fire Hazard and Limiting Temperatures)	-	-	-
25.2(Fire Hazard and Limiting Temperatures)	-	-	-
26.1(Thermal Efficiency- Gas Stoves)	-	-	-
26.1(Thermal Efficiency- Gas Stoves)	-	-	-
26.1(Thermal Efficiency- Gas Stoves)	-	-	-
26.1(Thermal Efficiency- Gas Stoves)	-	-	-
26.1(Thermal Efficiency- Gas Stoves)	-	-	-
26.2(Thermal Efficiency- For Built in Hobs)	-	-	-
26.2(Thermal Efficiency- For Built in Hobs)	-	-	-
26.2(Thermal Efficiency- For Built in Hobs)	-	-	-
26.2(Thermal Efficiency- For Built in Hobs)	-	-	-
26.2(Thermal Efficiency- For Built in Hobs)	-	-	-

-
Included w.e.f 13.11.2025

3760

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 18162 (2023)

Textiles Light weight jute sacking bags for packing 50 kg pulses and soyabean Specification

All

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Manufacture)	-	800	-
4.1.1(Manufacture)	-	800	-
4.2(Seam)	-	800	-
4.2(Seam)	-	800	-
4.2(Seam)	-	800	-
4.2(Seam)	-	800	-
4.3(Safety Stitch)	-	800	-
4.3(Safety Stitch)	-	800	-
4.4(Hemming at the Mouth)	-	800	-
4.4(Hemming at the Mouth)	-	800	-
Cl-4.5(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
Cl-4.1.1 & 5.1, Table 1, i (a)(Dimensions-Outside length, cm)	-	800	-
Cl-4.1.1 & 5.1, Table 1, i (b)(Dimensions- Outside width, cm)	-	800	-
Cl-4.1.1 & 5.1, Table 1 (ii)(Ends/dm)	-	800	-
Cl-4.1.1 & 5.1, Table 1, iii(Picks/dm)	-	800	-
Cl-4.1.1 & 5.1, Table 1, iv(Corrected mass/bag, g, percent)	-	800	-
Cl-4.1.1 & 5.1, Table 1, v (a)(Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): - Warp way)	-	800	-
Cl-4.1.1 & 5.1, Table 1, v (b)(Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): - Weft way)	-	800	-
Cl-4.1.1 & 5.1, Table 1, vi(Average seam strength (5 cm × 20 cm ravelled strip), Min, N (kgf))	-	800	-
Cl-4.1.1 & 5.1, Table 1, vii(Moisture regain, percent, Max)	-	800	-
Cl-4.1.1 & 5.1, Table 1, viii(Oil content on dry de-oiled material, Max)	-	800	-
5.1, Table 1, v(Warpway -IS 9113 (Cl.8.6.2))	-	800	-
5.1, Table 1, v(Average breaking load of sacking (ravelled strip method, 10.0 cm × 20.0 cm), Min, N (kgf) Warpway:)	-	800	-
5.1, Table 1, v(Average breaking load of sacking (ravelled strip method, 10.0 cm × 20.0 cm), Min, N (kgf) Weftway:)	-	800	-
4.1(Manufacture)	-	800	-
4.1.1(Manufacture)	-	800	-
4.2(Seam)	-	800	-
4.2(Seam)	-	800	-
4.2(Seam)	-	800	-
4.2(Seam)	-	800	-
4.3(Safety Stitch)	-	800	-
4.3(Safety Stitch)	-	800	-
4.4(Hemming at the Mouth)	-	800	-
4.4(Hemming at the Mouth)	-	800	-
Cl-4.5(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
Cl-4.1.1 & 5.1, Table 1, i (a)(Dimensions-Outside length, cm)	-	800	-
Cl-4.1.1 & 5.1, Table 1, i (b)(Dimensions- Outside width, cm)	-	800	-
Cl-4.1.1 & 5.1, Table 1 (ii)(Ends/dm)	-	800	-
Cl-4.1.1 & 5.1, Table 1, iii(Picks/dm)	-	800	-
Cl-4.1.1 & 5.1, Table 1, iv(Corrected mass/bag, g, percent)	-	800	-
Cl-4.1.1 & 5.1, Table 1, v (a)(Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): - Warp way)	-	800	-
Cl-4.1.1 & 5.1, Table 1, v (b)(Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): - Weft way)	-	800	-
Cl-4.1.1 & 5.1, Table 1, vi(Average seam strength (5 cm × 20 cm ravelled strip), Min, N (kgf))	-	800	-
Cl-4.1.1 & 5.1, Table 1, vii(Moisture regain, percent, Max)	-	800	-
Cl-4.1.1 & 5.1, Table 1, viii(Oil content on dry de-oiled material, Max)	-	800	-
5.1, Table 1, v(Warpway -IS 9113 (Cl.8.6.2))	-	800	-
5.1, Table 1, v(Average breaking load of sacking (ravelled strip method, 10.0 cm × 20.0 cm), Min, N (kgf) Warpway:)	-	800	-
5.1, Table 1, v(Average breaking load of sacking (ravelled strip method, 10.0 cm × 20.0 cm), Min, N (kgf) Weftway:)	-	800	-
4.1(Manufacture)	-	800	-
4.1.1(Manufacture)	-	800	-
4.2(Seam)	-	800	-
4.2(Seam)	-	800	-
4.2(Seam)	-	800	-
4.2(Seam)	-	800	-
4.3(Safety Stitch)	-	800	-
4.3(Safety Stitch)	-	800	-
4.4(Hemming at the Mouth)	-	800	-
4.4(Hemming at the Mouth)	-	800	-
Cl-4.5(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
Cl-4.1.1 & 5.1, Table 1, i (a)(Dimensions-Outside length, cm)	-	800	-
Cl-4.1.1 & 5.1, Table 1, i (b)(Dimensions- Outside width, cm)	-	800	-
Cl-4.1.1 & 5.1, Table 1 (ii)(Ends/dm)	-	800	-
Cl-4.1.1 & 5.1, Table 1, iii(Picks/dm)	-	800	-
Cl-4.1.1 & 5.1, Table 1, iv(Corrected mass/bag, g, percent)	-	800	-
Cl-4.1.1 & 5.1, Table 1, v (a)(Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): - Warp way)	-	800	-
Cl-4.1.1 & 5.1, Table 1, v (b)(Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): - Weft way)	-	800	-
Cl-4.1.1 & 5.1, Table 1, vi(Average seam strength (5 cm × 20 cm ravelled strip), Min, N (kgf))	-	800	-
Cl-4.1.1 & 5.1, Table 1, vii(Moisture regain, percent, Max)	-	800	-
Cl-4.1.1 & 5.1, Table 1, viii(Oil content on dry de-oiled material, Max)	-	800	-
5.1, Table 1, v(Warpway -IS 9113 (Cl.8.6.2))	-	800800	-
5.1, Table 1, v(Average breaking load of sacking (ravelled strip method, 10.0 cm × 20.0 cm), Min, N (kgf) Warpway:)	-	800	-
5.1, Table 1, v(Average breaking load of sacking (ravelled strip method, 10.0 cm × 20.0 cm), Min, N (kgf) Weftway:)	-	800	-
4.1(Manufacture)	-	800	-
4.1.1(Manufacture)	-	800	-
4.2(Seam)	-	800	-
4.2(Seam)	-	800	-
4.2(Seam)	-	800	-
4.2(Seam)	-	800	-
4.3(Safety Stitch)	-	800	-
4.3(Safety Stitch)	-	800	-
4.4(Hemming at the Mouth)	-	800	-
4.4(Hemming at the Mouth)	-	800	-
Cl-4.5(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	800	-
Cl-4.1.1 & 5.1, Table 1, i (a)(Dimensions-Outside length, cm)	-	800	-
Cl-4.1.1 & 5.1, Table 1, i (b)(Dimensions- Outside width, cm)	-	800	-
Cl-4.1.1 & 5.1, Table 1 (ii)(Ends/dm)	-	800	-
Cl-4.1.1 & 5.1, Table 1, iii(Picks/dm)	-	800	-
Cl-4.1.1 & 5.1, Table 1, iv(Corrected mass/bag, g, percent)	-	800	-
Cl-4.1.1 & 5.1, Table 1, v (a)(Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): - Warp way)	-	800	-
Cl-4.1.1 & 5.1, Table 1, v (b)(Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): - Weft way)	-	800	-
Cl-4.1.1 & 5.1, Table 1, vi(Average seam strength (5 cm × 20 cm ravelled strip), Min, N (kgf))	-	800	-
Cl-4.1.1 & 5.1, Table 1, vii(Moisture regain, percent, Max)	-	800	-
Cl-4.1.1 & 5.1, Table 1, viii(Oil content on dry de-oiled material, Max)	-	800	-
5.1, Table 1, v(Warpway -IS 9113 (Cl.8.6.2))	-	800	-
5.1, Table 1, v(Average breaking load of sacking (ravelled strip method, 10.0 cm × 20.0 cm), Min, N (kgf) Warpway:)	-	800	-
5.1, Table 1, v(Average breaking load of sacking (ravelled strip method, 10.0 cm × 20.0 cm), Min, N (kgf) Weftway:)	-	1000	-

08 May, 2028

-
Included w.e.f 04.09.2025

3761

Excel Surveyors Pvt. Ltd., Kolkata

5135906

IS 9685 (2002)

Textiles – Sand bags – Specification (first revision)

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Sacking)	-	400	-
Cl-4.2(Vent at the mouth, tying cord)	-	200	-
Cl-4.3(Seam)	-	800	-
Cl- 4.4(Hem or Selvedge at the mouth)	-	200	-
Cl-4.5(Joined Bag)	-	800	-
Cl-4.6(Freedom from Defects)	-	200	-
Cl-5.1, Table-1 (i)("Dimensions, cm a) Outside length")	-	300	-
Cl-5.1, Table-1 (i)("Dimensions, cm b) Outside width")	-	300	-
Cl-5.1, Table-1 (ii)("Corrected mass per bag, g: a) Unproofed")	-	600	(for unproofed)
Cl-5.1, Table-1 (ii)("Corrected mass per bag, g: b) Proofed")	-	600	(for proof)
Cl-5.1, Table-1 (iii)(Average breaking load of seam [ ravened strip method, [5 cm x 20 cm] A4irr,N ( kgf): Warpway)	-	1000	-
Cl-5.1, Table-1 (iii)(Average breaking load of seam [ ravened strip method, [5 cm x 20 cm] A4irr,N ( kgf): Weftway)	-	0	-
Cl-5.2(Rot-Proofing)	-	1000	-
Cl-5.3, Table-2 (i)(Total number of bags per bale)	-	0	-
Cl-5.3, Table-2 (ii)(Number of joined bags per bundle of 25 bags)	-	0	-
Cl-5.3, Table-2 (iii)(Corrected net mass ofa bale)	-	0	-
Cl-5.3, Table-2 (iv)(Moisture regain, percent, Max)	-	600	-
Cl-5.3, Table-2 (v)(Oil content on dry deoiled material basis, percent, A4ax)	-	600	-
Cl-5.4(Moisture)	-	0	-
Cl-7(Marking)	-	0	-

31 Dec, 2026

-
Included w.e.f 01.09.2025 Exclusion: Cl-7 (Marking), Cl-5.4 (Moisture), Cl-5.3, Table-2 (iii) (Corrected net mass ofa bale), Cl-5.3, Table-2 (ii) (Number of joined bags per bundle of 25 bags), Cl-5.3, Table-2 (i) (Total number of bags per bale)

3762

GLOBAL COMPLIANCE LABORATORY INDIA, GHAZIABAD

5172706

IS 302 : Part 2 : Sec 8 (1994)

Safety of household and similar electrical appliances : part 2 particular requirements, section 8 electrical shavers hair, clippers and similar appliances

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
31(Resistance to Rusting)	-	3000	-
30(Resistance to Heat & Fire)	-	3000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	3000	-
28(Screws & Connection)	-	3000	-
27(Provision For Earthing)	-	3000	-
26(Terminals For External Conductors)	-	3000	-
25(Supply Connection & External Flexible Cables and Cords)	-	3000	-
23(Internal wiring)	-	3000	-
22(Construction)	-	3000	-
21(Mechanical strength)	-	3000	-
20(Stability & Mechanical Hazards)	-	3000	-
19(Abnormal Operation)	-	3000	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	3000	-
16(Leakage Current and Electric Strength)	-	3000	-
15(Moisture Resistance)	-	3000	-
14(Radio and Television Interference Suppression/ Transient Over Voltage)	-	3000	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	3000	-
11(Temperature Rise/Heating)	-	3000	-
10(Power Input & Current)	-	3000	-
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	3000	-
7(Marking/ Marking & Instructions)	-	3000	-
6(Classification)	-	3000	-
5(Rating)	-	3000	-
31(Resistance to Rusting)	-	3000	-
30(Resistance to Heat & Fire)	-	3000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	3000	-
28(Screws & Connection)	-	3000	-
27(Provision For Earthing)	-	3000	-
26(Terminals For External Conductors)	-	3000	-
25(Supply Connection & External Flexible Cables and Cords)	-	3000	-
23(Internal wiring)	-	3000	-
22(Construction)	-	3000	-
21(Mechanical strength)	-	3000	-
20(Stability & Mechanical Hazards)	-	3000	-
19(Abnormal Operation)	-	3000	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	3000	-
16(Leakage Current and Electric Strength)	-	3000	-
15(Moisture Resistance)	-	3000	-
14(Radio and Television Interference Suppression/ Transient Over Voltage)	-	3000	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	3000	-
11(Temperature Rise/Heating)	-	3000	-
10(Power Input & Current)	-	3000	-
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	3000	-
7(Marking/ Marking & Instructions)	-	3000	-
6(Classification)	-	3000	-
5(Rating)	-	3000	-
31(Resistance to Rusting)	-	3000	-
30(Resistance to Heat & Fire)	-	3000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	3000	-
28(Screws & Connection)	-	3000	-
27(Provision For Earthing)	-	3000	-
26(Terminals For External Conductors)	-	3000	-
25(Supply Connection & External Flexible Cables and Cords)	-	3000	-
23(Internal wiring)	-	3000	-
22(Construction)	-	3000	-
21(Mechanical strength)	-	3000	-
20(Stability & Mechanical Hazards)	-	3000	-
19(Abnormal Operation)	-	3000	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	3000	-
16(Leakage Current and Electric Strength)	-	3000	-
15(Moisture Resistance)	-	3000	-
14(Radio and Television Interference Suppression/ Transient Over Voltage)	-	3000	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	3000	-
11(Temperature Rise/Heating)	-	3000	-
10(Power Input & Current)	-	3000	-
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	3000	-
7(Marking/ Marking & Instructions)	-	3000	-
6(Classification)	-	3000	-
5(Rating)	-	3000	-
31(Resistance to Rusting)	-	3000	-
30(Resistance to Heat & Fire)	-	3000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	3000	-
28(Screws & Connection)	-	3000	-
27(Provision For Earthing)	-	3000	-
26(Terminals For External Conductors)	-	3000	-
25(Supply Connection & External Flexible Cables and Cords)	-	3000	-
23(Internal wiring)	-	3000	-
22(Construction)	-	3000	-
21(Mechanical strength)	-	3000	-
20(Stability & Mechanical Hazards)	-	3000	-
19(Abnormal Operation)	-	3000	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	3000	-
16(Leakage Current and Electric Strength)	-	3000	-
15(Moisture Resistance)	-	3000	-
14(Radio and Television Interference Suppression/ Transient Over Voltage)	-	3000	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	3000	-
11(Temperature Rise/Heating)	-	3000	-
10(Power Input & Current)	-	3000	-
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	3000	-
7(Marking/ Marking & Instructions)	-	3000	-
6(Classification)	-	3000	-
5(Rating)	-	3000	-

20 Jun, 2029

3763

Atckon Laboratories LLP, Bahadurgarh

8186436

IS 2494 : Part 1 (1994)

V - Belts - Endless V - Belts for industrial purposes: Part 1 general purpose - Specification (Second Revision)

ALL

4200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.0(Marking)	-	4200	-
10.1(Elongation)	-	4200	-
10.1(Tensile Strength)	-	4200	-
8.0(Transmitting Capacities)	-	4200	-
7.2.2(Matched Belts - Code)	-	4200	-
7.2.1(Matched Belts - Difference)	-	4200	-
7.1(Belt Pitch Length)	-	4200	-
6.0(Designation)	-	4200	-
5 Table 2B(Cross sectional dimension)	-	4200	-
5 Table 2B(Cross sectional dimension)	-	4200	-
5 Table 2A(Cross sectional dimension)	-	4200	-
5 Table 2A(Cross sectional dimension)	-	4200	-
5 Table 2A(Cross sectional dimension)	-	4200	-
5 Table 2A(Cross sectional dimension)	-	4200	-
5 Table 2A(Cross sectional dimension)	-	4200	-
5 Table 2A(Cross sectional dimension)	-	4200	-
5 Table 2A(Cross sectional dimension)	-	4200	-
5 Table 2A(Cross sectional dimension)	-	4200	-
5 Table 2A(Cross sectional dimension)	-	4200	-
5 Table 1(Cross sectional dimension)	-	4200	-
5 Table 1(Cross sectional dimension)	-	4200	-
5 Table 1(Cross sectional dimension)	-	4200	-
5 Table 1(Cross sectional dimension)	-	4200	-
4.1(Material and Workmanship)	-	4200	-
4.1(Material -Reinforcing polyester cord/fabric of the V-belts)	-	4200	-
4.1(Material and Workmanship)	-	4200	-
7.2(Test Matched Belts)	-	4200	-
5 & 11(Test Belt ride position of top surface of belt with respect to top of pully groove.)	-	4200	-
Clause 5 Table 1(Nominal Pitch Width (Wp))	-	4200	-
Clause 5 Table 1(Nominal Height (T))	-	4200	-
Clause 5 Table 1(Nominal Included Angle (A))	-	4200	-
Clause 5 Table 1(Nominal Pitch Width (W))	-	4200	-
Cl-4.3(Presence of polychloroprene rubber on outside jacket of V-belt)	-	4200	-
7.2(Test Matched Belts)	-	4200	-
5 & 11(Test Belt ride position of top surface of belt with respect to top of pully groove.)	-	4200	-
Clause 5 Table 1(Nominal Pitch Width (Wp))	-	4200	-
Clause 5 Table 1(Nominal Height (T))	-	4200	-
Clause 5 Table 1(Nominal Included Angle (A))	-	4200	-
Clause 5 Table 1(Nominal Pitch Width (W))	-	4200	-
Cl-4.3(Presence of polychloroprene rubber on outside jacket of V-belt)	-	4200	-

-
Included w.e.f.26.08.2025

3764

AJEO TESTING LABS PVT LTD, GHAZIABAD

8178606

IS 1239 : Part 1 (2004)

Steel tubes, tubulars and other wrought steel fittings - Specification: Part 1 steel tubes (Sixth Revision)

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Outer Diameter, Thickness & Mass)	-	0	-
Cl 12(Workmanship)	-	200	-
Cl 14(Tensile Test, Flattening Test & Bend Test)	-	0	-
Clause 14.1.1(Elongation Percent)	-	500	-
Cl. 8, 9 Table 3,4 & 5(Mass of Tube)	-	500	-
Cl. 14.3(Flattening test (Over 50 mm NB))	-	500	-
Cl. 14.2(Bend Test (uto and including 50 mm NB))	-	500	-
Cl. 6.5(Height of Internal Fin)	-	300	-
Cl. 8 Table 3,4 & 5(Outside Diameter)	-	300	-
Cl. 8, 9 Table 3,4 & 5(Thickness)	-	300	-
10.1(Thared Joints(IS:554))	-	200	-
Clause 11.1(Random Length)	-	200	-
Clause 11.3(Approximate Length)	-	200	-
Clause 11.2(Exact Length)	-	200	-
12 AND AS PER IS 4736(MASS OF ZINC COATING)	-	500	-
12 AND AS PER IS 4736(UNIFORMITY OF ZINC COATING)	-	500	-
Cl. 14.1(Tensile Strength)	-	1000	-
Cl. 6.1.1, table1 of IS 1239(Part1)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 6.1.1, table1 of IS 1239(Part1)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 6.1.1, table1 of IS 1239(Part1)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 6.1.1, table1 of IS 1239(Part1)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
6.1.1(CARBON)	-	0	-
6.1.1(SULPHUR)	-	0	-
6.1.1(PHOSPHORUS)	-	0	-
6.1.1(MANGANESE)	-	0	-
6.2 AND AS PER IS 10748(CARBON)	-	0	-
6.2 AND AS PER IS 10748(SULPHUR)	-	0	-
6.2 AND AS PER IS 10748(PHOSPHORUS)	-	0	-
6.2 AND AS PER IS 10748(MANGANESE)	-	0	-
6.2 AND AS PER IS 10748(CARBON EQUIVALENT)	-	0	-
6.2 AND AS PER IS 10748(SILICON)	-	200	-
6.2 AND AS PER IS 10748(ALUMINIUM)	-	200	-
6.2 AND AS PER IS 10748(MICRO ALLOY)	-	0	-
STEEI-I TUBES, TUBULARS AND OTHER WROUGHT STEEL FITTINGS(NITROGEN)	-	0	-
6.2 AND AS PER IS 10748(COPPER)	-	200	-
6.2 AND AS PER IS 513(CARBON)	-	0	-
6.2 AND AS PER IS 513(SULPHUR)	-	0	-
6.2 AND AS PER IS 513(PHOSPHORUS)	-	0	-
6.2 AND AS PER IS 513(MANGANESE)	-	0	-
6.2 AND AS PER IS 513(SILICON)	-	0	-
6.2 AND AS PER IS 513(ALUMINIUM)	-	0	-
6.2 AND AS PER IS 513(MICRO ALLOY)	-	0	-
6.2 AND AS PER IS 513(NITROGEN)	-	200	-
Clause - 6.1.1, Table-1(CARBON)	-	0	-
Clause - 6.1.1, Table-1(SULPHUR)	-	0	-
Clause - 6.1.1, Table-1(PHOSPHURS)	-	0	-
Clause - 6.1.1, Table-1(MANGANESE)	-	0	-
Clause - 6.1.1, Table-1(NITROGEN)	-	0	-
Clause - 6.1.1, Table-1(SILICON)	-	0	-
Clause - 6.1.1, Table-1(ALUMINIUM)	-	0	-
6.2 AND AS PER IS 10748(CARBON)	-	0	-
6.2 AND AS PER IS 10748(SULPHUR)	-	0	-
6.2 AND AS PER IS 10748(PHOSPHORUS)	-	0	-
6.2 AND AS PER IS 10748(MANGANESE)	-	0	-
6.2 AND AS PER IS 10748(CARBON EQUIVALENT)	-	0	-
6.2 AND AS PER IS 10748(SILICON)	-	0	-
6.2 AND AS PER IS 10748(ALUMINIUM)	-	0	-
6.2 AND AS PER IS 10748(MICRO ALLOY)	-	0	-
6.2 AND AS PER IS 10748(NITROGEN)	-	0	-
6.2 AND AS PER IS 10748(COPPER)	-	0	-
6.2 AND AS PER IS 513(CARBON)	-	0	-
6.2 AND AS PER IS 513(SULPHUR)	-	0	-
6.2 AND AS PER IS 513(PHOSPHORUS)	-	0	-
6.2 AND AS PER IS 513(MANGANESE)	-	0	-
6.2 AND AS PER IS 513(SILICON)	-	0	-
6.2 AND AS PER IS 513(ALUMINIUM)	-	0	-
6.2 AND AS PER IS 513(ALUMINIUM)	-	0	-
6.2 AND AS PER IS 513(MICRO ALLOY)	-	0	-
6.2 AND AS PER IS 513(NITROGEN)	-	0	-
12 AND AS PER IS 4736(UNIFORMITY OF ZINC COATING)	-	0	-
8.0 (b)(Thickness- SOP MT-23)	-	0	-
8.0 (c)(Mass of Tube- SOP MT-23)	-	0	-
12.1(Galvanizing)	-	0	-
12.2(Galvanizing)	-	0	-
17.0 & 17.1(Marking -IS:1239 (P1))	-	0	-
17.0 & 17.2(Colour Band - IS:1239 (P1))	-	0	-
17.0 & 17.4(Length of colour band - IS:1239 (P1))	-	0	-
10.2(Plain end)	-	0	-
13.0(Leak Proof Test)	-	2000	-
11(Length & tolerance)	-	0	-
14.2 & 14.3(Bend/Flattening test)	-	0	-
15(Workmanship)	-	0	-
Cl 10.1(Manufacturing )	-	0	-
Cl. 15(Workmanship)	-	0	-
Cl. 14.1.1(Elongation)	-	0	-
Cl. 3.3, 10.2(Plain End)	-	0	-
Cl. 11(Length)	-	0	-
Clause 8.1 (Table3,4,5)(Nominal Bore)	-	0	-
Cl 15(Workmanship)	-	0	-
Cl 14(Tensile Test, Flattening Test & Bend Test)	-	0	-
Cl 12(Workmanship)	-	0	-
Cl 10.1.1(Manufacturing)	-	0	-
Cl 10.1(Manufacturing)	-	0	-
Cl 8(Outer Diameter, Thickness & Mass)	-	0	-
7, 6.1.1(ALUMINIUM)	-	0	-
7, 6.1.1(SILICON)	-	0	-
7, 6.1.1(NITROGEN)	-	0	-
7, 6.1.1(MANGANESE)	-	0	-
7, 6.1.1(PHOSPHURS)	-	0	-
Cl 10.1(Manufacturing )	-	0	-
Cl 10.1.1(Manufacturing )	-	0	-
7, 6.1.1(SULPHUR)	-	0	-
7, 6.1.1(CARBON)	-	0	-
Cl 15(Workmanship)	-	0	-
Cl 15(Workmanship)	-	0	-
Cl 8(Outer Diameter, Thickness & Mass)	-	0	-
Cl 10.1.1(Manufacturing )	-	0	-
Cl 12(Workmanship)	-	0	-
Cl 14(Tensile Test, Flattening Test & Bend Test)	-	0	-
Cl 14(Tensile Test, Flattening Test & Bend Test)	-	0	-
Cl 15(Workmanship)	-	0	-
Cl 8(Outer Diameter, Thickness & Mass)	-	0	-
Cl 10.1.1(Manufacturing )	-	0	-
Cl 12(Workmanship)	-	0	-
Cl 10.1(Manufacturing )	-	0	-
Cl 8(Outer Diameter, Thickness & Mass)	-	0	-
Cl 12(Workmanship)	-	0	-
Cl 14(Tensile Test, Flattening Test & Bend Test)	-	0	-
Clause 14.1.1(Elongation Percent)	-	0	-
Cl. 8, 9 Table 3,4 & 5(Mass of Tube)	-	0	-
Cl. 14.3(Flattening test (Over 50 mm NB))	-	0	-
Cl. 14.2(Bend Test (uto and including 50 mm NB))	-	0	-
Cl. 6.5(Height of Internal Fin)	-	0	-
Cl. 8 Table 3,4 & 5(Outside Diameter)	-	0	-
Cl. 8, 9 Table 3,4 & 5(Thickness)	-	0	-
10.1(Thared Joints(IS:554))	-	0	-
Clause 11.1(Random Length)	-	0	-
Clause 11.2(Exact Length)	-	0	-
12 AND AS PER IS 4736(MASS OF ZINC COATING)	-	0	-
12 AND AS PER IS 4736(UNIFORMITY OF ZINC COATING)	-	0	-
Cl. 14.1(Tensile Strength)	-	0	-
Cl. 6.1.1, table1 of IS 1239(Part1)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 6.1.1, table1 of IS 1239(Part1)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 6.1.1, table1 of IS 1239(Part1)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 6.1.1, table1 of IS 1239(Part1)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
6.1.1(CARBON)	-	0	-
6.1.1(SULPHUR)	-	0	-
6.1.1(PHOSPHORUS)	-	0	-
6.1.1(MANGANESE)	-	0	-
6.2 AND AS PER IS 10748(CARBON)	-	0	-
6.2 AND AS PER IS 10748(SULPHUR)	-	0	-
6.2 AND AS PER IS 10748(PHOSPHORUS)	-	0	-
6.2 AND AS PER IS 10748(MANGANESE)	-	0	-
6.2 AND AS PER IS 10748(CARBON EQUIVALENT)	-	0	-
6.2 AND AS PER IS 10748(SILICON)	-	0	-
6.2 AND AS PER IS 10748(ALUMINIUM)	-	0	-
6.2 AND AS PER IS 10748(MICRO ALLOY)	-	0	-
STEEI-I TUBES, TUBULARS AND OTHER WROUGHT STEEL FITTINGS(NITROGEN)	-	0	-
6.2 AND AS PER IS 10748(COPPER)	-	0	-
6.2 AND AS PER IS 513(CARBON)	-	0	-
6.2 AND AS PER IS 513(SULPHUR)	-	0	-
6.2 AND AS PER IS 513(PHOSPHORUS)	-	0	-
6.2 AND AS PER IS 513(MANGANESE)	-	0	-
6.2 AND AS PER IS 513(SILICON)	-	0	-
6.2 AND AS PER IS 513(ALUMINIUM)	-	0	-
6.2 AND AS PER IS 513(MICRO ALLOY)	-	0	-
6.2 AND AS PER IS 513(NITROGEN)	-	0	-
Clause - 6.1.1, Table-1(CARBON)	-	0	-
Clause - 6.1.1, Table-1(SULPHUR)	-	0	-
Clause - 6.1.1, Table-1(PHOSPHURS)	-	0	-
Clause - 6.1.1, Table-1(MANGANESE)	-	0	-
Clause - 6.1.1, Table-1(NITROGEN)	-	0	-
Clause - 6.1.1, Table-1(SILICON)	-	0	-
Clause - 6.1.1, Table-1(ALUMINIUM)	-	0	-
6.2 AND AS PER IS 10748(CARBON)	-	0	-
6.2 AND AS PER IS 10748(SULPHUR)	-	0	-
6.2 AND AS PER IS 10748(PHOSPHORUS)	-	0	-
6.2 AND AS PER IS 10748(MANGANESE)	-	0	-
6.2 AND AS PER IS 10748(CARBON EQUIVALENT)	-	0	-
6.2 AND AS PER IS 10748(SILICON)	-	0	-
6.2 AND AS PER IS 10748(ALUMINIUM)	-	0	-
6.2 AND AS PER IS 10748(MICRO ALLOY)	-	0	-
6.2 AND AS PER IS 10748(NITROGEN)	-	0	-
6.2 AND AS PER IS 10748(COPPER)	-	0	-
6.2 AND AS PER IS 513(CARBON)	-	0	-
6.2 AND AS PER IS 513(SULPHUR)	-	0	-
6.2 AND AS PER IS 513(PHOSPHORUS)	-	0	-
6.2 AND AS PER IS 513(MANGANESE)	-	0	-
6.2 AND AS PER IS 513(SILICON)	-	0	-
6.2 AND AS PER IS 513(ALUMINIUM)	-	0	-
6.2 AND AS PER IS 513(ALUMINIUM)	-	0	-
6.2 AND AS PER IS 513(MICRO ALLOY)	-	0	-
6.2 AND AS PER IS 513(NITROGEN)	-	0	-
12 AND AS PER IS 4736(UNIFORMITY OF ZINC COATING)	-	0	-
8.0 (b)(Thickness- SOP MT-23)	-	0	-
8.0 (c)(Mass of Tube- SOP MT-23)	-	0	-
12.1(Galvanizing)	-	0	-
12.2(Galvanizing)	-	0	-
17.0 & 17.1(Marking -IS:1239 (P1))	-	0	-
17.0 & 17.2(Colour Band - IS:1239 (P1))	-	0	-
17.0 & 17.4(Length of colour band - IS:1239 (P1))	-	0	-
10.2(Plain end)	-	0	-
13.0(Leak Proof Test)	-	0	-
11(Length & tolerance)	-	0	-
14.2 & 14.3(Bend/Flattening test)	-	0	-
15(Workmanship)	-	0	-
Cl 10.1(Manufacturing )	-	0	-
Cl. 15(Workmanship)	-	0	-
Cl. 14.1.1(Elongation)	-	0	-
Cl. 3.3, 10.2(Plain End)	-	0	-
Cl. 11(Length)	-	0	-
Clause 8.1 (Table3,4,5)(Nominal Bore)	-	0	-
Cl 15(Workmanship)	-	0	-
Cl 14(Tensile Test, Flattening Test & Bend Test)	-	0	-
Cl 12(Workmanship)	-	0	-
Cl 10.1.1(Manufacturing)	-	0	-
Cl 10.1(Manufacturing)	-	0	-
Cl 8(Outer Diameter, Thickness & Mass)	-	0	-
7, 6.1.1(ALUMINIUM)	-	0	-
7, 6.1.1(SILICON)	-	0	-
7, 6.1.1(NITROGEN)	-	0	-
7, 6.1.1(MANGANESE)	-	0	-
7, 6.1.1(PHOSPHURS)	-	0	-
Cl 10.1(Manufacturing )	-	0	-
Cl 10.1.1(Manufacturing )	-	0	-
7, 6.1.1(SULPHUR)	-	0	-
7, 6.1.1(CARBON)	-	0	-
Cl 15(Workmanship)	-	0	-
Cl 15(Workmanship)	-	0	-
Cl 8(Outer Diameter, Thickness & Mass)	-	0	-
Cl 10.1.1(Manufacturing )	-	0	-
Cl 12(Workmanship)	-	0	-
Cl 14(Tensile Test, Flattening Test & Bend Test)	-	0	-
Cl 14(Tensile Test, Flattening Test & Bend Test)	-	0	-
Cl 15(Workmanship)	-	0	-
Cl 8(Outer Diameter, Thickness & Mass)	-	0	-
Cl 10.1.1(Manufacturing )	-	0	-
Cl 12(Workmanship)	-	0	-
Cl 10.1(Manufacturing )	-	0	-
Clause 11.3(Approximate Length)	-	0	-

-
Included w.e.f. 14.10.2025

3765

SHRIRAM FOOD AND PHARMA RESEARCH CENTRE, GHAZIABAD

9179606

IS 9873 : Part 7 (2017)

Safety of toys: Part 7 requirements and test methods for finger paints

17000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.1 (Colourants used in finger paint shall not have any of the health hazard classifications set out in 4.1 (hazard class 3.1 to 3.10) - ISO 8124)	-	133	-
4.2.2 - Table 1, 2(Finger Paint shall not contain Azo colourants that by cleavage of one or more azo groups can produce the primary aromatic amines - Annex C)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 1(Preservatives - Benzoic acid, sodium benzoate (as acid) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 2(Preservatives - Ammonium benzoate calcium benzoate, potassium benzoate, magnesium benzoate, MEA-benzoate, methyl benzoate, ethyl benzoate, propyl benzoate, butyl benzoate, isobutyl benzoate, isopropyl benzoate, phenyl benzoate (as acid) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 3(Preservatives - Propionic acid,, ammonium propionate, calcium propionate, magnesium propionate, potassium propionate, sodium propionate (as acid) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 4(Preservatives - Hexa-2,4-dienoic acid and its salts: Sorbic acid, calcium sorbate, sodium sorbate potassium sorbate (as acid) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 5(Preservatives - Paraformaldehyde (free-formaldehyde)- EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 6(Preservatives - Biphenyl-2-ol (o-Phenylphenol), sodium o-phenylphenate, potassium o-phenylphenate, MEA o-phenylphenate (expressed as the phenol) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 7(Preservatives - Pyrithione zinc - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 8(Preservatives - Inorganic sulfites and hydrogen-sulfites: Sodium sulfite, ammonium bisulfite, ammonium sulfite, potassium sulfite, potassium, hydrogen sulfite, sodium bisulfite, sodium metabisulfite, potassium metabisulfite (as free SO2) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 9(Preservatives - Chlorobutanol - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 10(Preservatives -4-Hydroxybenzoic acid, methylparaben, potassium ethylparaben, potassium paraben, sodium methylparaben, sodium ethylparaben, ethylparaben, sodium paraben, potassium methylparaben, calcium paraben, phenylparaben (as acid) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 11(Preservatives - 3-Acetyl-6-methylpyran-2,4 (3H)-dione and its salts: Dehydroacetic acid, sodium dehydroacetate (as acid) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 12(Preservatives - Formic acid, sodium formate (as acid) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 13(Preservatives - 3,3’-Dibromo-4,4’-hexamethylenedioxydi-benzamidine and its salts (including isethionate) (Dibromohexamidine isethionate) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 14(Preservatives - Undec-10- enoic acid and its salts: Undecylenic acid, potassium undecylenate, sodium undecylenate, calcium undecylenate, TEA-undecylenate, MEA-undecylenate (as acid) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 15(Preservatives - 5- Pyrimidinamine, 1,3- bis (2-ethylhexyl)-5- methylhexahydropyrimidin-5-amine (Hexetidine) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 16(Preservatives - 2-Bromo-2-nitropropane-1,3-diol (Bronopol) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 17(Preservatives - 2,4-Dichlorobenzyl alcohol - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 18(Preservatives - 1-(4-Chlorophenyl)-3-(3,4-dichlorophenyl) urea (Triclocarban) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 19(Preservatives - 5-Chloro-2- (2,4- dichlorophenoxy) phenol (Triclosan) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 20(Preservatives - Chloroxylenol - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 21(Preservatives -N,N″-methylenebis[N′-[3-(hydroxymethyl)-2,5-dioxoimidazolidin-4-yl]urea] (Imidazolidinyl urea) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 22(Preservatives -Poly(methylene),.alpha.,.omega.-bis[[[(aminoiminomethyl) amino]iminomethyl] amino]-, dihydrochloride (Polyaminopropyl biguanide) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 23(Preservatives - 2-Phenoxyethanol - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 24(Preservatives - Methenamine - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 25(Preservatives - Methenamine-3-chloro-allylochloride (Quaternium-15) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 26(Preservatives -1-(4-Chlorophenoxy)-1-(imidazol-1-yl)-3,3-dimethylbutan-2-one (Climbazole) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 27(Preservatives - 1,3-Bis (hydroxymethyl)-5,5-dimethylimidazolidine-2,4-dione (DMDM Hydantoin) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 28(Preservatives - 1-Hydroxy-4-methyl-6-(2,4,4- trimethylpentyl) 2-pyridon and its monoethanolamine salt (Piroctone Olamine) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 29(Preservatives - 2,2’-methylenebis(6-bromo-4-chlorophenol) (Bromochlorophene) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 30(Preservatives - 4-Isopropyl-m-cresol (o-Cymen-5-ol) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 31(Preservatives - Mixture of 5-Chloro-2-methyl-isothiazol-3(2H)-one and 2-methylisothiazol-3(2H)-one with magnesium chloride and magnesium nitrate (of a mixture in the ratio 3:1 of 5-chloro-2-methylisothiazol 3(2H)-one and 2-methylisothiazol-3 (2H)-one) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 32(Preservatives - 2-methylisothiazol-3(2H)-one (MIT) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 33(Preservatives - 2-Benzyl-4-chlorophenol (Chlorophene) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 34(Preservatives - 2-Chloroacetamide - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 35(Preservatives - N,N″-bis(4-chlorophenyl)-3,12-diimino-2,4,11,13-tetraazatetradecanediamidine and its digluconate, diacetate and dihydrochloride: Chlorhexidine, Chlorhexidine Diacetate, Chlorhexidine Digluconate Chlorhexidine Dihydrochloride (as chlorhexidine) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 36(Preservatives - Alkyl (C 12–22) trimethyl ammonium bromide and chloride: Behentrimonium chloride, cetrimonium bromide, cetrimonium chloride, laurtrimonium bromide, laurtrimonium chloride, steartrimonium bromide, steartrimonium chloride - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 37(Preservatives - 4,4-Dimethyl-1,3-oxazolidine - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 38(Preservatives - N-(Hydroxymethyl)-N-(dihydroxymethyl-1,3-dioxo-2,5-imidazolidinyl-4)-N’-(hydroxymethyl) urea (Diazolidinyl Urea) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 39(Preservatives -Benzenecarboximidamide, 4,4’-(1,6-hexanediyl-bis-(oxy))-bis-(3-nitrobenzamidine) and its salts (including isethionate and phydroxybenzoate): hexamidine, hexamidine diisethionate, hexamidine paraben - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 40(Preservatives - Pentane-1,5-dial (Glutaraldehyde, Glutaral) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 41(Preservatives - 3-(p-Chlorophenoxy)-propane-1,2 diol (Chlorphenesin) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 42(Preservatives - Sodium N-hydroxymethyl-glycinate - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 43(Preservatives - Benzenemethanaminium, N,Ndimethyl-N-[2-[2-[4-(1,1,3,3,- tetramethylbutyl)phenoxy] ethoxy] ethyl]-, chloride (Benzethonium Chloride)- EU Cosmetics Legislation)	-	133	-
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	133	-
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	133	-
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	133	-
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	133	-
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	133	-
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	133	-
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	133	-
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	133	-
4.5.1.1 - Table 1(Primary aromatic amines - Annex C)	-	133	-
4.5.1.2 - Table 2(Individual carcinogenic primary aromatic amines - Annex C)	-	133	-
4.5.1.2 - Table 2(Total,carcinogenic primary aromatic amines - Annex C)	-	133	-
4.5.2 - Table 3(Impurities - Polychlorinated biphenyls - Annex C)	-	133	-
4.5.2 - Table 3(IImpurities- Hexachlorobenzene - Annex C)	-	133	-
4.5.2 - Table 3(Impurities - Benzo (α) pyrene - Annex C)	-	133	-
4.6 - Table 4(Taste and smell - Finger paints shall not be sweetened, flavoured or fragranced - Cl 4.6)	-	133	-
4.7(pH value - ISO 787-9)	-	133	-
4.8(shall only use binding agents, extenders, humectants and surfactants which are not classified with any of the health hazards set out in in 4.1 (hazards class 3.1 to 3.10))	-	133	-
4.9(N-Nitrosamines - N-nitrosodiethanolamine (NDELA) - n EN 71–12:2013, 7.2.1 and Clause 8)	-	133	-
4.1(Container - Containers used for finger paints shall not have a design that is likely to be mistaken by children with containers of foodstuffs or drinks)	-	133	-
4.2.1 (Colourants used in finger paint shall not have any of the health hazard classifications set out in 4.1 (hazard class 3.1 to 3.10) - ISO 8124)	-	133	-
4.2.2 - Table 1, 2(Finger Paint shall not contain Azo colourants that by cleavage of one or more azo groups can produce the primary aromatic amines - Annex C)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 1(Preservatives - Benzoic acid, sodium benzoate (as acid) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 2(Preservatives - Ammonium benzoate calcium benzoate, potassium benzoate, magnesium benzoate, MEA-benzoate, methyl benzoate, ethyl benzoate, propyl benzoate, butyl benzoate, isobutyl benzoate, isopropyl benzoate, phenyl benzoate (as acid) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 3(Preservatives - Propionic acid,, ammonium propionate, calcium propionate, magnesium propionate, potassium propionate, sodium propionate (as acid) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 4(Preservatives - Hexa-2,4-dienoic acid and its salts: Sorbic acid, calcium sorbate, sodium sorbate potassium sorbate (as acid) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 5(Preservatives - Paraformaldehyde (free-formaldehyde)- EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 6(Preservatives - Biphenyl-2-ol (o-Phenylphenol), sodium o-phenylphenate, potassium o-phenylphenate, MEA o-phenylphenate (expressed as the phenol) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 7(Preservatives - Pyrithione zinc - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 8(Preservatives - Inorganic sulfites and hydrogen-sulfites: Sodium sulfite, ammonium bisulfite, ammonium sulfite, potassium sulfite, potassium, hydrogen sulfite, sodium bisulfite, sodium metabisulfite, potassium metabisulfite (as free SO2) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 9(Preservatives - Chlorobutanol - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 10(Preservatives -4-Hydroxybenzoic acid, methylparaben, potassium ethylparaben, potassium paraben, sodium methylparaben, sodium ethylparaben, ethylparaben, sodium paraben, potassium methylparaben, calcium paraben, phenylparaben (as acid) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 11(Preservatives - 3-Acetyl-6-methylpyran-2,4 (3H)-dione and its salts: Dehydroacetic acid, sodium dehydroacetate (as acid) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 12(Preservatives - Formic acid, sodium formate (as acid) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 13(Preservatives - 3,3’-Dibromo-4,4’-hexamethylenedioxydi-benzamidine and its salts (including isethionate) (Dibromohexamidine isethionate) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 14(Preservatives - Undec-10- enoic acid and its salts: Undecylenic acid, potassium undecylenate, sodium undecylenate, calcium undecylenate, TEA-undecylenate, MEA-undecylenate (as acid) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 15(Preservatives - 5- Pyrimidinamine, 1,3- bis (2-ethylhexyl)-5- methylhexahydropyrimidin-5-amine (Hexetidine) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 16(Preservatives - 2-Bromo-2-nitropropane-1,3-diol (Bronopol) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 17(Preservatives - 2,4-Dichlorobenzyl alcohol - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 18(Preservatives - 1-(4-Chlorophenyl)-3-(3,4-dichlorophenyl) urea (Triclocarban) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 19(Preservatives - 5-Chloro-2- (2,4- dichlorophenoxy) phenol (Triclosan) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 20(Preservatives - Chloroxylenol - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 21(Preservatives -N,N″-methylenebis[N′-[3-(hydroxymethyl)-2,5-dioxoimidazolidin-4-yl]urea] (Imidazolidinyl urea) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 22(Preservatives -Poly(methylene),.alpha.,.omega.-bis[[[(aminoiminomethyl) amino]iminomethyl] amino]-, dihydrochloride (Polyaminopropyl biguanide) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 23(Preservatives - 2-Phenoxyethanol - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 24(Preservatives - Methenamine - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 25(Preservatives - Methenamine-3-chloro-allylochloride (Quaternium-15) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 26(Preservatives -1-(4-Chlorophenoxy)-1-(imidazol-1-yl)-3,3-dimethylbutan-2-one (Climbazole) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 27(Preservatives - 1,3-Bis (hydroxymethyl)-5,5-dimethylimidazolidine-2,4-dione (DMDM Hydantoin) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 28(Preservatives - 1-Hydroxy-4-methyl-6-(2,4,4- trimethylpentyl) 2-pyridon and its monoethanolamine salt (Piroctone Olamine) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 29(Preservatives - 2,2’-methylenebis(6-bromo-4-chlorophenol) (Bromochlorophene) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 30(Preservatives - 4-Isopropyl-m-cresol (o-Cymen-5-ol) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 31(Preservatives - Mixture of 5-Chloro-2-methyl-isothiazol-3(2H)-one and 2-methylisothiazol-3(2H)-one with magnesium chloride and magnesium nitrate (of a mixture in the ratio 3:1 of 5-chloro-2-methylisothiazol 3(2H)-one and 2-methylisothiazol-3 (2H)-one) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 32(Preservatives - 2-methylisothiazol-3(2H)-one (MIT) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 33(Preservatives - 2-Benzyl-4-chlorophenol (Chlorophene) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 34(Preservatives - 2-Chloroacetamide - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 35(Preservatives - N,N″-bis(4-chlorophenyl)-3,12-diimino-2,4,11,13-tetraazatetradecanediamidine and its digluconate, diacetate and dihydrochloride: Chlorhexidine, Chlorhexidine Diacetate, Chlorhexidine Digluconate Chlorhexidine Dihydrochloride (as chlorhexidine) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 36(Preservatives - Alkyl (C 12–22) trimethyl ammonium bromide and chloride: Behentrimonium chloride, cetrimonium bromide, cetrimonium chloride, laurtrimonium bromide, laurtrimonium chloride, steartrimonium bromide, steartrimonium chloride - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 37(Preservatives - 4,4-Dimethyl-1,3-oxazolidine - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 38(Preservatives - N-(Hydroxymethyl)-N-(dihydroxymethyl-1,3-dioxo-2,5-imidazolidinyl-4)-N’-(hydroxymethyl) urea (Diazolidinyl Urea) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 39(Preservatives -Benzenecarboximidamide, 4,4’-(1,6-hexanediyl-bis-(oxy))-bis-(3-nitrobenzamidine) and its salts (including isethionate and phydroxybenzoate): hexamidine, hexamidine diisethionate, hexamidine paraben - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 40(Preservatives - Pentane-1,5-dial (Glutaraldehyde, Glutaral) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 41(Preservatives - 3-(p-Chlorophenoxy)-propane-1,2 diol (Chlorphenesin) - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 42(Preservatives - Sodium N-hydroxymethyl-glycinate - EU Cosmetics Legislation)	-	133	-
4.3 - Annex - D- Table D.1 - Ref 43(Preservatives - Benzenemethanaminium, N,Ndimethyl-N-[2-[2-[4-(1,1,3,3,- tetramethylbutyl)phenoxy] ethoxy] ethyl]-, chloride (Benzethonium Chloride)- EU Cosmetics Legislation)	-	133	-
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	133	-
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	133	-
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	133	-
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	133	-
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	133	-
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	133	-
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	133	-
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	133	-
4.5.1.1 - Table 1(Primary aromatic amines - Annex C)	-	133	-
4.5.1.2 - Table 2(Individual carcinogenic primary aromatic amines - Annex C)	-	133	-
4.5.1.2 - Table 2(Total,carcinogenic primary aromatic amines - Annex C)	-	133	-
4.5.2 - Table 3(Impurities - Polychlorinated biphenyls - Annex C)	-	133	-
4.5.2 - Table 3(IImpurities- Hexachlorobenzene - Annex C)	-	133	-
4.5.2 - Table 3(Impurities - Benzo (α) pyrene - Annex C)	-	133	-
4.6 - Table 4(Taste and smell - Finger paints shall not be sweetened, flavoured or fragranced - Cl 4.6)	-	133	-
4.7(pH value - ISO 787-9)	-	133	-
4.8(shall only use binding agents, extenders, humectants and surfactants which are not classified with any of the health hazards set out in in 4.1 (hazards class 3.1 to 3.10))	-	133	-
4.9(N-Nitrosamines - N-nitrosodiethanolamine (NDELA) - n EN 71–12:2013, 7.2.1 and Clause 8)	-	133	-
4.1(Container - Containers used for finger paints shall not have a design that is likely to be mistaken by children with containers of foodstuffs or drinks)	-	133	-

20 Aug, 2027

-
Included w.e.f. 13.11.2025

3766

TUV Rheinland (India) Pvt., Ltd., Bengaluru (6162126)

6162126

IS/IEC 61730 : PART 2 (2023)

Photovoltaic (PV) Module - Safety Qualification Part 2 Requirements for Testing (Second Revision)

1897000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.2(Visual inspection MST 01)	-	30000	10% Discount to BIS
10.3(Performance at STC MST 02)	-	30000	10% Discount to BIS
10.4(Maximum power determination MST 03)	-	25000	10% Discount to BIS
10.5(Insulation thickness test MST 04)	-	60000	10% Discount to BIS
10.6(Durability of markings MST 05)	-	10000	10% Discount to BIS
10.7(Sharp edge test MST 06)	-	10000	10% Discount to BIS
10.8(Bypass diode functionality test MST 07)	-	10000	10% Discount to BIS
10.9(Accessibility test MST 11)	-	15000	10% Discount to BIS
10.1(Cut susceptibility test MST 12)	-	25000	10% Discount to BIS
10.11(Continuity test of equipotential bonding MST 13)	-	25000	10% Discount to BIS
10.12(Impulse voltage test MST 14)	-	75000	10% Discount to BIS
10.13(Insulation test MST 16)	-	25000	10% Discount to BIS
10.14(Wet leakage current test MST 17)	-	25000	10% Discount to BIS
10.16(Hot-spot endurance test MST 22)	-	75000	10% Discount to BIS
10.17(Fire test MST 23)	-	300000	10% Discount to BIS
10.18(Ignitability test MST 24)	-	30000	10% Discount to BIS
10.19(Bypass diode thermal test MST 25)	-	50000	10% Discount to BIS
10.20(Reverse current overload test MST 26)	-	50000	10% Discount to BIS
10.21(Module breakage test MST 32)	-	25000	10% Discount to BIS
10.22(Screw connections test MST 33)	-	10000	10% Discount to BIS
10.23(Static mechanical load test MST 34)	-	75000	10% Discount to BIS
10.24(Peel test MST 35)	-	10000	10% Discount to BIS
10.25(Lap shear strength test MST 36)	-	10000	10% Discount to BIS
10.26(Materials creep test MST 37)	-	35000	10% Discount to BIS
10.27(Robustness of terminations test MST 42)	-	10000	10% Discount to BIS
10.28(Thermal cycling test MST 51)	-	187000	10% Discount to BIS
10.29(Humidity freeze test MST 52)	-	275000	10% Discount to BIS
10.30(Damp heat test MST 53)	-	75000	10% Discount to BIS
10.31(UV test MST 54)	-	175000	10% Discount to BIS
10.32(Cold conditioning test MST 55)	-	35000	10% Discount to BIS
10.33(Dry heat conditioning test MST 56)	-	30000	10% Discount to BIS
10.34(Evaluation of insulation coordination MST 57)	-	75000	10% Discount to BIS

10 Sep, 2027

-
Included w.e.f 09.09.2025

3767

Excel Surveyors Pvt. Ltd., Kolkata

5135906

IS 14738 (2017)

Flexible intermediate bulk containers (Fibcs) - Specification (First Revision)

FIBC, Heavy Duty Resuable FIBC, Standard Duty Resuable FIBC

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Materials)	-	0	-
Cl-4.1.3(Breaking force)	-	500	-
Cl-4.1.4(UV-resistance)	-	7000	FOR UV RESISTANCE TEST , THE CHARGES WILL BE 7000/-
Cl-4.2(Construction)	-	300	-
Cl-4.3(Design)	-	200	-
Cl-5.1(Perfromance Test)	-	0	-
Cl-5.2(Selection of FIBC for Testing)	-	0	-
Cl-6.1(Cyclic Top Lift Test)	-	7000	FOR ALL CYCLIC TEST , THE CHARGES WILL BE 7000/-
Cl-6.1.1.1(Heavy duty re-usable FIBC)	-	0	-
Cl-6.1.1.2(Standard duty re-usable FIBC)	-	0	-
Cl-6.1.1.3(Single-trip FIBC)	-	0	-
Cl-6.1.1.4(Criteria for Conformity)	-	0	-
Cl-6.2.1(Compression/Stacking Test- Applicability)	-	1000	FOR COMPRESSION/ STACKING TEST , THE CHARGES WILLBE 1000/-
Cl-6.2.2(Calculation of the Superimposed Load)	-	0	-
Cl-6.2.3(Duration of the Test)	-	0	-
Cl-6.2.4(Criteria for Passing the Test)	-	0	-
Cl-8(Marking)	-	0	-
Cl-4.1(Materials)	-	0	-
Cl-4.1.3(Breaking force)	-	0	-
Cl-4.1.4(UV-resistance)	-	0	-
Cl-4.2(Construction)	-	0	-
Cl-4.3(Design)	-	0	-
Cl-5.1(Perfromance Test)	-	0	-
Cl-5.2(Selection of FIBC for Testing)	-	0	-
Cl-6.1(Cyclic Top Lift Test)	-	0	-
Cl-6.1.1.1(Heavy duty re-usable FIBC)	-	0	-
Cl-6.1.1.2(Standard duty re-usable FIBC)	-	0	-
Cl-6.1.1.3(Single-trip FIBC)	-	0	-
Cl-6.1.1.4(Criteria for Conformity)	-	0	-
Cl-6.2.1(Compression/Stacking Test- Applicability)	-	0	-
Cl-6.2.2(Calculation of the Superimposed Load)	-	0	-
Cl-6.2.3(Duration of the Test)	-	0	-
Cl-6.2.4(Criteria for Passing the Test)	-	0	-
Cl-8(Marking)	-	0	-

31 Dec, 2026

-
Included w.e.f. 01.01.2026 Cl-8 (Marking)

3768

SHRIRAM FOOD AND PHARMA RESEARCH CENTRE, GHAZIABAD

9179606

IS 9873 : Part 9 (2017)

Safety of Toys Part 9 Certain Phthalates Esters in Toys and Children's Products

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	625	-
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	625	-
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	625	-
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	625	-
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	625	-
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	625	-
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	625	-
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	625	-

20 Aug, 2027

-
Included w.e.f. 04.11.2025

3769

GLOBAL COMPLIANCE LABORATORY INDIA, GHAZIABAD

5172706

IS 302 : Part 2 : Sec 59 (1999)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 59 insect killers

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 32 302-2-59 : 1999(Radiation Hazards)	-	3000	-
Cl. 31 302-2-59 : 1999(Resistance to Rusting)	-	3000	-
Cl. 30 302-2-59 : 1999(Resistance to Heat Fire & Tracking )	-	3000	-
Cl. 29 302-2-59 : 1999(Clearances, Creepage Distances & Solid insulation )	-	3000	-
Cl. 28 302-2-59 : 1999(Screws & Connections)	-	3000	-
Cl. 27 302-2-59 : 1999(Provision for Earthing )	-	3000	-
Cl. 26 302-2-59 : 1999(Terminals for External conductors )	-	3000	-
Cl. 25 302-2-59 : 1999(Supply Connection & External Flexible Cords)	-	3000	-
Cl. 23 302-2-59 : 1999(Internal Wiring)	-	3000	-
Cl. 22 302-2-59 : 1999(Construction )	-	3000	-
Cl. 21 302-2-59 : 1999(Mechanical strength)	-	3000	-
Cl. 20 302-2-59 : 1999(Stability & Mechanical Hazards)	-	3000	-
Cl. 19 302-2-59 : 1999(Abnormal Operation )	-	3000	-
Cl. 17 302-2-59 : 1999(Overload Protection of Transformers and Associated Circuit)	-	3000	-
Cl. 16 302-2-59 : 1999(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	3000	-
Cl. 15 302-2-59 : 1999(Moisture Resistance Test )	-	3000	-
Cl. 14 302-2-59 : 1999(Radio and television interference suppression / Transient over voltages)	-	3000	-
Cl. 13 302-2-59 : 1999(Leakage Current & Electric Strength at Operating Temperature)	-	3000	-
Cl. 11 302-2-59 : 1999(Temperature Rise)	-	3000	-
Cl. 10 302-2-59 : 1999(Power Input and Current )	-	3000	-
Cl. 8 302-2-59 : 1999(Protection Against Electric Shock )	-	3000	-
Cl. 7 302-2-59 : 1999(Marking)	-	3000	-
(CI. 6 IS 302-2-59 : 1999(Classification )	-	3000	-
Cl. 9 302-2-59 : 1999(Starting of motor operated appliances)	-	3000	-
Cl. 32 302-2-59 : 1999(Radiation Hazards)	-	3000	-
Cl. 31 302-2-59 : 1999(Resistance to Rusting)	-	3000	-
Cl. 30 302-2-59 : 1999(Resistance to Heat Fire & Tracking )	-	3000	-
Cl. 29 302-2-59 : 1999(Clearances, Creepage Distances & Solid insulation )	-	3000	-
Cl. 28 302-2-59 : 1999(Screws & Connections)	-	3000	-
Cl. 27 302-2-59 : 1999(Provision for Earthing )	-	3000	-
Cl. 26 302-2-59 : 1999(Terminals for External conductors )	-	3000	-
Cl. 25 302-2-59 : 1999(Supply Connection & External Flexible Cords)	-	3000	-
Cl. 23 302-2-59 : 1999(Internal Wiring)	-	3000	-
Cl. 22 302-2-59 : 1999(Construction )	-	3000	-
Cl. 21 302-2-59 : 1999(Mechanical strength)	-	3000	-
Cl. 20 302-2-59 : 1999(Stability & Mechanical Hazards)	-	3000	-
Cl. 19 302-2-59 : 1999(Abnormal Operation )	-	3000	-
Cl. 17 302-2-59 : 1999(Overload Protection of Transformers and Associated Circuit)	-	3000	-
Cl. 16 302-2-59 : 1999(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	3000	-
Cl. 15 302-2-59 : 1999(Moisture Resistance Test )	-	3000	-
Cl. 14 302-2-59 : 1999(Radio and television interference suppression / Transient over voltages)	-	3000	-
Cl. 13 302-2-59 : 1999(Leakage Current & Electric Strength at Operating Temperature)	-	3000	-
Cl. 11 302-2-59 : 1999(Temperature Rise)	-	3000	-
Cl. 10 302-2-59 : 1999(Power Input and Current )	-	3000	-
Cl. 8 302-2-59 : 1999(Protection Against Electric Shock )	-	3000	-
Cl. 7 302-2-59 : 1999(Marking)	-	3000	-
(CI. 6 IS 302-2-59 : 1999(Classification )	-	3000	-
Cl. 32 302-2-59 : 1999(Radiation Hazards)	-	3000	-
Cl. 31 302-2-59 : 1999(Resistance to Rusting)	-	3000	-
Cl. 30 302-2-59 : 1999(Resistance to Heat Fire & Tracking )	-	3000	-
Cl. 29 302-2-59 : 1999(Clearances, Creepage Distances & Solid insulation )	-	3000	-
Cl. 28 302-2-59 : 1999(Screws & Connections)	-	3000	-
Cl. 27 302-2-59 : 1999(Provision for Earthing )	-	3000	-
Cl. 26 302-2-59 : 1999(Terminals for External conductors )	-	3000	-
Cl. 25 302-2-59 : 1999(Supply Connection & External Flexible Cords)	-	3000	-
Cl. 23 302-2-59 : 1999(Internal Wiring)	-	3000	-
Cl. 22 302-2-59 : 1999(Construction )	-	3000	-
Cl. 21 302-2-59 : 1999(Mechanical strength)	-	3000	-
Cl. 20 302-2-59 : 1999(Stability & Mechanical Hazards)	-	3000	-
Cl. 19 302-2-59 : 1999(Abnormal Operation )	-	3000	-
Cl. 17 302-2-59 : 1999(Overload Protection of Transformers and Associated Circuit)	-	3000	-
Cl. 16 302-2-59 : 1999(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	3000	-
Cl. 15 302-2-59 : 1999(Moisture Resistance Test )	-	3000	-
Cl. 14 302-2-59 : 1999(Radio and television interference suppression / Transient over voltages)	-	3000	-
Cl. 13 302-2-59 : 1999(Leakage Current & Electric Strength at Operating Temperature)	-	3000	-
Cl. 11 302-2-59 : 1999(Temperature Rise)	-	3000	-
Cl. 10 302-2-59 : 1999(Power Input and Current )	-	3000	-
Cl. 8 302-2-59 : 1999(Protection Against Electric Shock )	-	3000	-
Cl. 7 302-2-59 : 1999(Marking)	-	3000	-
(CI. 6 IS 302-2-59 : 1999(Classification )	-	3000	-
Cl. 32 302-2-59 : 1999(Radiation Hazards)	-	3000	-
Cl. 31 302-2-59 : 1999(Resistance to Rusting)	-	3000	-
Cl. 30 302-2-59 : 1999(Resistance to Heat Fire & Tracking )	-	3000	-
Cl. 29 302-2-59 : 1999(Clearances, Creepage Distances & Solid insulation )	-	3000	-
Cl. 28 302-2-59 : 1999(Screws & Connections)	-	3000	-
Cl. 27 302-2-59 : 1999(Provision for Earthing )	-	3000	-
Cl. 26 302-2-59 : 1999(Terminals for External conductors )	-	3000	-
Cl. 25 302-2-59 : 1999(Supply Connection & External Flexible Cords)	-	3000	-
Cl. 23 302-2-59 : 1999(Internal Wiring)	-	3000	-
Cl. 22 302-2-59 : 1999(Construction )	-	3000	-
Cl. 21 302-2-59 : 1999(Mechanical strength)	-	3000	-
Cl. 20 302-2-59 : 1999(Stability & Mechanical Hazards)	-	3000	-
Cl. 19 302-2-59 : 1999(Abnormal Operation )	-	3000	-
Cl. 17 302-2-59 : 1999(Overload Protection of Transformers and Associated Circuit)	-	3000	-
Cl. 16 302-2-59 : 1999(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	3000	-
Cl. 15 302-2-59 : 1999(Moisture Resistance Test )	-	3000	-
Cl. 14 302-2-59 : 1999(Radio and television interference suppression / Transient over voltages)	-	3000	-
Cl. 13 302-2-59 : 1999(Leakage Current & Electric Strength at Operating Temperature)	-	3000	-
Cl. 11 302-2-59 : 1999(Temperature Rise)	-	3000	-
Cl. 10 302-2-59 : 1999(Power Input and Current )	-	3000	-
Cl. 8 302-2-59 : 1999(Protection Against Electric Shock )	-	3000	-
Cl. 7 302-2-59 : 1999(Marking)	-	3000	-
(CI. 6 IS 302-2-59 : 1999(Classification )	-	3000	-
Cl. 32 302-2-59 : 1999(Radiation Hazards)	-	3000	-
Cl. 31 302-2-59 : 1999(Resistance to Rusting)	-	3000	-
Cl. 30 302-2-59 : 1999(Resistance to Heat Fire & Tracking )	-	3000	-
Cl. 29 302-2-59 : 1999(Clearances, Creepage Distances & Solid insulation )	-	3000	-
Cl. 28 302-2-59 : 1999(Screws & Connections)	-	3000	-
Cl. 27 302-2-59 : 1999(Provision for Earthing )	-	3000	-
Cl. 26 302-2-59 : 1999(Terminals for External conductors )	-	3000	-
Cl. 25 302-2-59 : 1999(Supply Connection & External Flexible Cords)	-	3000	-
Cl. 23 302-2-59 : 1999(Internal Wiring)	-	3000	-
Cl. 22 302-2-59 : 1999(Construction )	-	3000	-
Cl. 21 302-2-59 : 1999(Mechanical strength)	-	3000	-
Cl. 20 302-2-59 : 1999(Stability & Mechanical Hazards)	-	3000	-
Cl. 19 302-2-59 : 1999(Abnormal Operation )	-	3000	-
Cl. 17 302-2-59 : 1999(Overload Protection of Transformers and Associated Circuit)	-	3000	-
Cl. 16 302-2-59 : 1999(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	3000	-
Cl. 15 302-2-59 : 1999(Moisture Resistance Test )	-	3000	-
Cl. 14 302-2-59 : 1999(Radio and television interference suppression / Transient over voltages)	-	3000	-
Cl. 13 302-2-59 : 1999(Leakage Current & Electric Strength at Operating Temperature)	-	3000	-
Cl. 11 302-2-59 : 1999(Temperature Rise)	-	3000	-
Cl. 10 302-2-59 : 1999(Power Input and Current )	-	3000	-
Cl. 8 302-2-59 : 1999(Protection Against Electric Shock )	-	3000	-
Cl. 7 302-2-59 : 1999(Marking)	-	3000	-
(CI. 6 IS 302-2-59 : 1999(Classification )	-	3000	-
Cl. 32 302-2-59 : 1999(Radiation Hazards)	-	3000	-
Cl. 31 302-2-59 : 1999(Resistance to Rusting)	-	3000	-
Cl. 30 302-2-59 : 1999(Resistance to Heat Fire & Tracking )	-	3000	-
Cl. 29 302-2-59 : 1999(Clearances, Creepage Distances & Solid insulation )	-	3000	-
Cl. 28 302-2-59 : 1999(Screws & Connections)	-	3000	-
Cl. 27 302-2-59 : 1999(Provision for Earthing )	-	3000	-
Cl. 26 302-2-59 : 1999(Terminals for External conductors )	-	3000	-
Cl. 25 302-2-59 : 1999(Supply Connection & External Flexible Cords)	-	3000	-
Cl. 23 302-2-59 : 1999(Internal Wiring)	-	3000	-
Cl. 22 302-2-59 : 1999(Construction )	-	3000	-
Cl. 21 302-2-59 : 1999(Mechanical strength)	-	3000	-
Cl. 20 302-2-59 : 1999(Stability & Mechanical Hazards)	-	3000	-
Cl. 19 302-2-59 : 1999(Abnormal Operation )	-	3000	-
Cl. 17 302-2-59 : 1999(Overload Protection of Transformers and Associated Circuit)	-	3000	-
Cl. 16 302-2-59 : 1999(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	3000	-
Cl. 15 302-2-59 : 1999(Moisture Resistance Test )	-	3000	-
Cl. 14 302-2-59 : 1999(Radio and television interference suppression / Transient over voltages)	-	3000	-
Cl. 13 302-2-59 : 1999(Leakage Current & Electric Strength at Operating Temperature)	-	3000	-
Cl. 11 302-2-59 : 1999(Temperature Rise)	-	3000	-
Cl. 10 302-2-59 : 1999(Power Input and Current )	-	3000	-
Cl. 8 302-2-59 : 1999(Protection Against Electric Shock )	-	3000	-
Cl. 7 302-2-59 : 1999(Marking)	-	3000	-
(CI. 6 IS 302-2-59 : 1999(Classification )	-	3000	-

20 Jun, 2029

-
Included w.e.f 26.11.2025 Excluding EMI/EMC –Cl- 19.11.4.1 to 19.11.4.7 Cl.24 (Component)"

3770

Alpha Test House Private Limited, Delhi

8131026

IS/IEC 62368 : Part 1 (2023)

Audio Video Information and Communication Technology Equipment - Part 1: Safety Requirements (Second Revision)

192000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(General- materials, components)	-	500	-
Cl-4.2(Energy source classifications)	-	500	-
Cl-4.3(Protection against energy sources)	-	500	-
Cl-4.4(Safeguards)	-	500	-
Cl-4.5(Explosion)	-	2200	-
Cl-4.6(Fixing of conductors and conductive parts)	-	2200	-
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	2200	-
Cl-4.8(Equipment containing coin or button cell batteries)	-	2200	-
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	2200	-
Cl-4.10(Components requirements)	-	500	-
Cl-5.1(General- Electrically-caused injury)	-	500	-
Cl-5.2(Classification and limits of electrical energy sources)	-	500	-
Cl-5.3(Protection against electrical energy sources)	-	2200	-
Cl-5.4(Insulation materials and requirements)	-	2400	-
Cl-5.5(Components as safeguards)	-	2200	-
Cl-5.6(Protective conductor)	-	2200	-
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	2200	-
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	2200	-
Cl-6.1(General- Electrically-caused fire)	-	500	-
Cl-6.2(Classification of power sources and potential ignition sources)	-	500	-
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	2200	-
Cl-6.4(Safeguards against fire under single fault conditions)	-	2200	-
Cl-6.5(Internal and external wiring)	-	2200	-
Cl-7.1(General- Injury caused by hazardous substances)	-	500	-
Cl-7.2(Reduction of exposure to hazardous substances)	-	2200	-
Cl-7.3(Ozone exposure)	-	500	-
Cl-7.4(Use of personal safeguards or personal protective equipment (PPE)	-	500	-
Cl-7.5(Use of instructional safeguards and instructions)	-	500	-
Cl-8.1(General- Mechanically-caused injury)	-	500	-
Cl-8.2(Mechanical energy source classifications)	-	500	-
Cl-8.3(Safeguards against mechanical energy sources)	-	500	-
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	2200	-
Cl-8.5(Safeguards against moving parts)	-	2200	-
Cl-8.6(Stability of equipment)	-	2200	-
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	2200	-
Cl-8.8(Handle strength)	-	2200	-
Cl-8.9(Wheels or casters attachment requirements)	-	2200	-
Cl-8.10(Carts, stands, and similar carriers)	-	2200	-
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	2200	-
Cl-9.1(General-Thermal burn injury)	-	500	-
Cl-9.2(Thermal energy source classifications)	-	500	-
Cl-9.3(Touch temperature limits)	-	500	-
Cl-9.4(Safeguards against thermal energy sources)	-	2200	-
Cl-9.5(Requirements for safeguards)	-	500	-
Cl-9.6(Requirements for wireless power transmitters)	-	2200	-
Cl-10.1(General-Radiation)	-	500	-
Cl-10.2(Radiation energy source classifications)	-	500	-
Cl-10.3(Safeguards against laser radiation)	-	0	-
Cl-10.4("Safeguards against optical radiation from lamps and lamp systems (including LED types)")	-	500	-
Cl-10.5(Safeguards against X-radiation)	-	0	-
Cl-10.6(Safeguards against acoustic energy sources)	-	0	-
Annex A(Examples of equipment within the scope of this document)	-	500	-
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	500	-
Annex B-2(Normal operating conditions)	-	500	-
Annex B-3(Simulated abnormal operating conditions)	-	500	-
Annex B-4(Simulated single fault conditions)	-	500	-
Annex C-1(Protection of materials in equipment from UV radiation)	-	0	-
Annex C-2(UV light conditioning test)	-	0	-
Annex D-1(Impulse test generators)	-	500	-
Annex D-2(Antenna interface test generator)	-	500	-
Annex D-3(Electronic pulse generator)	-	500	-
Annex E-1(Electrical energy source classification for audio signals)	-	500	-
Annex E-2(Audio signals used during test)	-	500	-
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	500	-
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	500	-
Annex F-2(Letter symbols and graphical symbols)	-	500	-
Annex F-3(Equipment markings)	-	2200	-
Annex F-4(Instructions)	-	500	-
Annex F-5(Instructional safeguards)	-	500	-
Annex G-1(Switches)	-	500	-
Annex G-2(Relays)	-	2200	-
Annex G-3(Protective devices)	-	2200	-
Annex G-4(Connectors)	-	2200	-
Annex G-5(Wound components)	-	2200	-
Annex G-6(Wire insulation)	-	2200	-
Annex G-7(Mains power supply cords and interconnection cables)	-	2200	-
Annex G-8(Varistors)	-	2200	-
Annex G-9(Integrated circuit (IC) current limiters)	-	500	-
Annex G-10(Resistors)	-	2200	-
Annex G-11(Capacitors and RC units)	-	2200	-
Annex G-12(Optocouplers)	-	500	-
Annex G-13(Printed boards)	-	2200	-
Annex G-14(Coatings on component terminals)	-	2200	-
Annex G-15(Pressurized liquid filled components or LFC assemblies)	-	2200	-
Annex G-16(IC that includes a capacitor discharge function (ICX))	-	2200	-
Annex H-1(General- Criteria for telephone ringing signals)	-	2200	-
Annex H-2(Method A)	-	2200	-
Annex H-3(Method B)	-	2200	-
Annex I(Overvoltage categories (see IEC 60364-4-44))	-	500	-
Annex J-1(General-Insulated winding wires for use without interleaved insulation)	-	500	-
Annex J-2(Type tests)	-	2200	-
Annex J-3(Testing during manufacturing)	-	2200	-
Annex K-1(General- Safety interlocks)	-	500	-
Annex K-2(Components of the safety interlock safeguard mechanism)	-	2200	-
Annex K-3(Inadvertent change of operating mode)	-	2200	-
Annex K-4(Interlock safeguard override)	-	2200	-
Annex K-5(Fail-safe)	-	500	-
Annex K-6(Mechanically operated safety interlocks)	-	500	-
Annex K-7(Interlock circuit isolation)	-	2200	-
Annex L-1(General requirements)	-	500	-
Annex L-2(Permanently connected equipment)	-	500	-
Annex L-3()	-	500	-
Annex L-4(Single-phase equipment)	-	500	-
Annex L-5(Three-phase equipment)	-	500	-
Annex L-6(Switches as disconnect devices)	-	500	-
Annex L-7(Plugs as disconnect devices)	-	500	-
Annex L-8(Multiple power sources)	-	500	-
Annex L-9(Compliance criteria)	-	500	-
Annex M-1(General requirements)	-	500	-
Annex M-2(Safety of batteries and their cells)	-	500	-
Annex M-3(Protection circuits for batteries provided within the equipment)	-	2200	-
Annex M-4(Additional safeguards for equipment containing a secondary lithium battery)	-	2200	-
Annex M-5(Risk of burn due to short-circuit during carrying)	-	500	-
Annex M-6(Safeguards against short-circuits)	-	500	-
Annex M-7(Risk of explosion from lead acid and NiCd batteries)	-	500	-
Annex M-8("Protection against internal ignition from external spark sources of rechargeable batteries with aqueous electrolyte")	-	500	-
Annex M-9(Preventing electrolyte spillage)	-	500	-
Annex M-10(Instructions to prevent reasonably foreseeable misuse)	-	500	-
Annex N(Electrochemical potentials (V))	-	500	-
Annex O(Measurement of creepage distances and clearances)	-	2200	-
Annex P-1(General-Safeguards against conductive objects)	-	500	-
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	2200	-
Annex P-3(Safeguards against spillage of internal liquids)	-	500	-
Annex P-4(Metallized coatings and adhesives securing parts)	-	2200	-
Annex Q-1(Limited power source)	-	2200	-
Annex Q-2(Test for external circuits – paired conductor cable)	-	2200	-
Annex R(Limited short-circuit test)	-	2200	-
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	2200	-
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	2200	-
Annex S-3(Flammability tests for the bottom of a fire enclosure)	-	2200	-
Annex S-4(Flammability classification of materials)	-	500	-
Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W)	-	500	-
Annex S-6(Grille covering material, cloth, and reticulated foam)	-	500	-
Annex T-1(General-Mechanical strength tests)	-	500	-
Annex T-2(Steady force test, 10 N)	-	2200	-
Annex T-3(Steady force test, 30 N)	-	2200	-
Annex T-4(Steady force test, 100 N)	-	2200	-
Annex T-5(Steady force test, 250 N)	-	2200	-
Annex T-6(Enclosure impact test)	-	2200	-
Annex T-7(Drop test)	-	2200	-
Annex T-8(Stress relief test)	-	2200	-
Annex T-9(Glass impact test)	-	500	-
Annex T-10(Glass fragmentation test)	-	2200	-
Annex T-11(Test for telescoping or rod antennas)	-	2200	-
Annex U("Mechanical strength of CRTs and protection against the effects of implosion")	-	500	-
Annex V-1(Accessible parts of equipment)	-	2200	-
Annex V-2(Accessible part criterion)	-	500	-
Annex W(Comparison of terms introduced in this document)	-	500	-
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	500	-
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	500	-
Annex Y-2(Resistance to UV radiation)	-	0	-
Annex Y-3(Resistance to corrosion)	-	2200	-
Annex Y-4(Gaskets)	-	2200	-
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	2200	-
Annex Y-6(Mechanical strength of enclosures)	-	2200	-

-
Included w.e.f.26.09.2025 Exclusion Cl-10.3 (safeguards against laser radiation) Cl-10.5 ( safeguards against X-radiation) Cl-10.6 (Safeguards against acoustic energy sources) Annex C-1 (Protection of materials in equipment from UV radiation) Annex c-2 (UV light conditioning test) Annex Y-2 (Resistance to UV radiation)

3771

EMC Testing and Compliance LLP, Gurugram

8141526

IS 11652 (2017)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg cement – Specification (third revision)

28000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	500	-
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	500	-
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	500	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	500	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	0	-
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	0	-
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	0	-
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	0	-
4.1(Raw Material )	-	500	-
4.2 (Fabric)	-	0	-
4.2 (Linear Density, 900 denier)	-	1000	-
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	500	-
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	500	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	500	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
4.3(Sacks)	-	1000	-
4.4(Seam )	-	1000	-
4.4(Seam )	-	0	-
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	0	-
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0	-
4.4(Seam The stitching shall be done with double fold over seam to)	-	0	-
4.4(to a depth of minimum 25 mm, so that so that)	-	500	-
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	500	-
4.4(The number of stitches/dm shall be 14 ± 2.)	-	500	-
4.4(Seam)	-	0	-
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.5(Lamination )	-	1000	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	500	-
4.7(Valve for Filling of Sacks)	-	500	-
4.7(There shall be a double fold at the top seam and)	-	0	-
4.7(and then stitching shall be done through six layers.)	-	0	-
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	0	-
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	500	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	0	-
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	0	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	2500	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	0	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	1500	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	0	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	0	-
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	1500	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	1500	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	0	-
5/5.6 (UV Resistance, )	-	0	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	10000	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	0	-
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	0	-
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	0	-
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	0	-
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	0	-
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	0	-
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	0	-
4.1(Raw Material )	-	0	-
4.2 (Fabric)	-	0	-
4.2 (Linear Density, 900 denier)	-	0	-
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	0	-
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	0	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	0	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
4.3(Sacks)	-	0	-
4.4(Seam )	-	0	-
4.4(Seam )	-	0	-
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	0	-
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0	-
4.4(Seam The stitching shall be done with double fold over seam to)	-	0	-
4.4(to a depth of minimum 25 mm, so that so that)	-	0	-
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0	-
4.4(The number of stitches/dm shall be 14 ± 2.)	-	0	-
4.4(Seam)	-	0	-
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	0	-
4.7(Valve for Filling of Sacks)	-	0	-
4.7(There shall be a double fold at the top seam and)	-	0	-
4.7(and then stitching shall be done through six layers.)	-	0	-
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	0	-
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	0	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	0	-
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	0	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	0	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	0	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	0	-
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	0	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	0	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	0	-
5/5.6 (UV Resistance, )	-	0	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	0	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	0	-
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	0	-
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	0	-
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	0	-
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	0	-
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	0	-
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	0	-
4.1(Raw Material )	-	0	-
4.2 (Fabric)	-	0	-
4.2 (Linear Density, 900 denier)	-	0	-
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	0	-
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	0	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	0	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
4.3(Sacks)	-	0	-
4.4(Seam )	-	0	-
4.4(Seam )	-	0	-
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	0	-
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0	-
4.4(Seam The stitching shall be done with double fold over seam to)	-	0	-
4.4(to a depth of minimum 25 mm, so that so that)	-	0	-
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0	-
4.4(The number of stitches/dm shall be 14 ± 2.)	-	0	-
4.4(Seam)	-	0	-
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	0	-
4.7(Valve for Filling of Sacks)	-	500	-
4.7(There shall be a double fold at the top seam and)	-	0	-
4.7(and then stitching shall be done through six layers.)	-	0	-
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	0	-
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	0	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	0	-
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	0	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	0	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	0	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	0	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	0	-
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	0	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	0	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	0	-
5/5.6 (UV Resistance, )	-	0	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	0	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	0	-
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	0	-
Cl-5 Fig. 1- Table 1- Sr. no. ii(Ends per dm - Annex B 40 ± 2)	-	0	-
Cl-5 Fig. 1- Table 1-Sr. no. iii(Picks per dm-Annex B 40 ± 2)	-	0	-
Cl-5, Fig. 1- Table 1- Sr. no. i(Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm)	-	0	-
Cl-5, Fig. 1- Table 1- Sr. no. i(Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm)	-	0	-
Cl-5, Fig. 1- Table 1-Sr. no. i(Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm)	-	0	-
Cl-5, Fig. 1, Table 1(i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm)	-	0	-
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	0	-
4.1(Raw Material )	-	0	-
4.2 (Fabric)	-	0	-
4.2 (Linear Density, 900 denier)	-	0	-
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	0	-
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	0	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	0	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
4.3(Sacks)	-	0	-
4.4(Seam )	-	0	-
4.4(Seam )	-	0	-
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	0	-
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0	-
4.4(Seam The stitching shall be done with double fold over seam to)	-	0	-
4.4(to a depth of minimum 25 mm, so that so that)	-	0	-
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0	-
4.4(The number of stitches/dm shall be 14 ± 2.)	-	0	-
4.4(Seam)	-	0	-
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	0	-
4.7(Valve for Filling of Sacks)	-	0	-
4.7(There shall be a double fold at the top seam and)	-	0	-
4.7(and then stitching shall be done through six layers.)	-	0	-
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	0	-
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	0	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	0	-
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	0	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	0	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	0	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	0	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	0	-
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	0	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	0	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	0	-
5/5.6 (UV Resistance, )	-	0	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	0	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	0	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	0	-

19 Jul, 2027

-
Included w.e.f 01.09.2025

3772

RTRC LIMITED, GURUGRAM

9177406

IS 7098 : Part 1 (2025)

Crosslinked Polyethylene Insulated Thermoplastic Sheathed Cables - Specification Part 1 For Working Voltages up to and Including 1 100 Volts (Second Revision)

CROSSLINKED POLYETHYLENE INSULATED PVC SHEATHED CABLES, FOR WORKING VOLTAGES UP TO AND INCLUDING 1100 VOLTS

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5, Table-1 (i)(Tensile strength)	-	500	Single core (normal)-16000 Single core (FR)-31000 Single core (FRLSH)-36000 Single core (LSHF)-43000 Additional Charge 1500 for each core
Cl-5, Table-1 (ii) (a)(Elongation at break- Ageing in air oven)	-	500	-
Cl-5, Table-1 (ii) (b)(Variation in tensile strength, from that without ageing)	-	500	Single core (normal)-16000 Single core (Cat-C1)-31000 Single core (Cat-C2)-36000 Single core (Cat-C3)-43000 Additional Charge Rs.1500 for each additional core
Cl-5, Table-1 (ii) (c)(Variation in elongation at break, from that without ageing)	-	0	-
Cl-5, Table-1 (iii) (a)(Hot set- Treatment;)	-	500	-
Cl-5, Table-1 (iii) (b)(Hot set- Elongation under load)	-	0	-
Cl-5, Table-1 (iii) (c)(Hot set- Permanent elongation after cooling)	-	0	-
Cl-5, Table-1 (iv)(Shrinkage)	-	500	-
Cl-5, Table-1 (v)(Water absorption (gravimetric))	-	500	-
Cl-5, Table-1 (vi)(Volume resistivity)	-	500	-
Cl-6.1 (a)(Fillers and inner sheath- Vulcanized or unvulcanized rubber)	-	0	-
Cl-6.1 (B)(Fillers and inner sheath- Thermoplastic materials)	-	0	-
Cl-7(Armouring)	-	0	-
Cl-8(Outer Sheath)	-	0	-
Cl-10.3(Tolerance on Thickness of Insulation)	-	0	-
Cl-11(Core Identification)	-	0	-
Cl-12(Laying up of Cores)	-	0	-
Cl-13(Inner Sheath (Common Covering))	-	500	-
Cl-14.1(Armouring- Application)	-	0	-
Cl-14.1.2(armour round wires/formed wires)	-	0	-
Cl-14.2(Type of Armour)	-	0	-
Cl-14.3(Dimensions)	-	500	-
Cl-14.4(Joints)	-	0	-
Cl-14.5(Resistance)	-	500	-
Cl-15.3(Thickness of Outer Sheath)	-	500	-
Cl-16.1 (i) (a)(Test on conductor: Annealing test (for copper);)	-	500	-
Cl-16.1 (i) (b)(Test on conductor: Tensile test (for aluminium);)	-	500	-
Cl-16.1 (i) (c)(Test on conductor: Wrapping test (for aluminium);)	-	500	-
Cl-16.1 (i) (d)(Test on conductor: Resistance test)	-	500	-
Cl-14.6 (a)(Physical tests on round wires/formed wires- Tensile strength)	-	500	-
Cl-14.6 (b)(Physical tests on round wires/formed wires- Elongation at break)	-	500	-
Cl-14.6 (c)(Physical tests on round wires/formed wires- Torsion test for round wires)	-	500	-
Cl-14.6 (d)(Physical tests on round wires/formed wires- Winding test for formed wires)	-	500	-
Cl-14.6 (e)(Physical tests on round wires/formed wires- Uniformity of zinc coating)	-	500	-
Cl-14.6 (f)(Physical tests on round wires/formed wires- Mass of zinc coating)	-	500	-
Cl-14.6 (g)(Physical tests on round wires/formed wires- Resistivity.)	-	500	-
Cl-10, 13, 15(Test for thickness of insulation and sheath)	-	500	-
Cl-16.1 (v) (1)(PVC Sheath- Tensile strength and elongation at break;)	-	1000	-
Cl-16.1 (v) (2)(PVC Sheath- Ageing in air oven)	-	1000	-
Cl-16.1 (v) (3)(PVC Sheath- Loss of mass in air oven)	-	1000	-
Cl-16.1 (v) (5)(PVC Sheath- Hot deformation test)	-	1000	-
Cl-16.1 (v) (6)(PVC Sheath- Heat shock test)	-	500	-
Cl-16.1 (v) (7)(PVC Sheath- Thermal stability)	-	500	-
Cl-8.3-Table 1A(PE Sheath- Carbon black content)	-	5500	As applicable
Cl-8.3-Table 1A(PE Sheath- Tensile strength and elongation at break before and after ageing)	-	0	As applicable
Cl-8.3-Table 1A(PE Sheath- Hot deformation)	-	0	As applicable
Cl-8.3-Table 1A(PE Sheath- Shrinkage test.)	-	0	As applicable
Cl- Table 1B(LSHF Sheath- Tensile strength and elongation at break before and after ageing)	-	0	As applicable
Cl- Table 1B(LSHF Sheath- Hot deformation)	-	0	As applicable
Cl- Table 1B(LSHF Sheath- Water absorption test)	-	0	As applicable
Cl- Table 1B(LSHF Sheath- Shrinkage test)	-	0	As applicable
Cl-17.2(High voltage test)	-	0	As applicable
Cl-17.3(Flammability test)	-	0	-
Cl-17.4(Oxygen index test (FR, FR-LSH or LSHF Sheath))	-	2500	Additional charges, if applicable
Cl-17.5(Flame retardance test on single cable)	-	2500	Additional charges, if applicable
Cl-17.6(Flame retardance test on bunched cables (FR, FR-LSH or LSHF Sheathed Cables))	-	10000	Additional charges, if applicable
Cl-17.7(Test for halogen acid evolution (FR-LSH or LSHF Outer Sheath))	-	2500	Additional charges, if applicable
Cl-17.8(Smoke density test (FR-LSH or LSHF Sheath))	-	2500	Additional charges, if applicable
Cl-17.9(Temperature index test; (FR, FR-LSH or LSHF Sheath))	-	0	Additional charges, if applicable
Cl-17.10(Test for pH and conductivity of LSHF Sheath)	-	3500	Additional charges, if applicable
Cl-17.11(Test for light transmission for LSHF Sheathed Cables)	-	3500	Additional charges, if applicable
Cl-16.4 (i)(Cold bend test for outer sheath)	-	0	As applicable
Cl-16.4 (ii)(Cold impact test for outer sheath)	-	0	As applicable
Cl-16.4 (iii)(Cold elongation test for LSHF sheath)	-	0	As applicable
Cl-4(Conductors -Material)	-	0	-
Cl-5, Table-1 (i)(Tensile strength)	-	0	-
Cl-5, Table-1 (ii) (a)(Elongation at break- Ageing in air oven)	-	0	-
Cl-5, Table-1 (ii) (b)(Variation in tensile strength, from that without ageing)	-	0	-
Cl-5, Table-1 (ii) (c)(Variation in elongation at break, from that without ageing)	-	0	-
Cl-5, Table-1 (iii) (a)(Hot set- Treatment;)	-	0	-
Cl-5, Table-1 (iii) (b)(Hot set- Elongation under load)	-	0	-
Cl-5, Table-1 (iii) (c)(Hot set- Permanent elongation after cooling)	-	0	-
Cl-5, Table-1 (iv)(Shrinkage)	-	0	-
Cl-5, Table-1 (v)(Water absorption (gravimetric))	-	0	-
Cl-5, Table-1 (vi)(Volume resistivity)	-	0	-
Cl-6.1 (a)(Fillers and inner sheath- Vulcanized or unvulcanized rubber)	-	0	-
Cl-6.1 (B)(Fillers and inner sheath- Thermoplastic materials)	-	0	-
Cl-7(Armouring)	-	0	-
Cl-8(Outer Sheath)	-	0	-
Cl-10.3(Tolerance on Thickness of Insulation)	-	0	-
Cl-11(Core Identification)	-	0	-
Cl-12(Laying up of Cores)	-	0	-
Cl-13(Inner Sheath (Common Covering))	-	0	-
Cl-14.1(Armouring- Application)	-	0	-
Cl-14.1.2(armour round wires/formed wires)	-	0	-
Cl-14.2(Type of Armour)	-	0	-
Cl-14.3(Dimensions)	-	0	-
Cl-14.4(Joints)	-	0	-
Cl-14.5(Resistance)	-	0	-
Cl-15.3(Thickness of Outer Sheath)	-	0	-
Cl-16.1 (i) (a)(Test on conductor: Annealing test (for copper);)	-	0	-
Cl-16.1 (i) (b)(Test on conductor: Tensile test (for aluminium);)	-	0	-
Cl-16.1 (i) (c)(Test on conductor: Wrapping test (for aluminium);)	-	0	-
Cl-16.1 (i) (d)(Test on conductor: Resistance test)	-	0	-
Cl-14.6 (a)(Physical tests on round wires/formed wires- Tensile strength)	-	0	-
Cl-14.6 (b)(Physical tests on round wires/formed wires- Elongation at break)	-	0	-
Cl-14.6 (c)(Physical tests on round wires/formed wires- Torsion test for round wires)	-	0	-
Cl-14.6 (d)(Physical tests on round wires/formed wires- Winding test for formed wires)	-	0	-
Cl-14.6 (e)(Physical tests on round wires/formed wires- Uniformity of zinc coating)	-	0	-
Cl-14.6 (f)(Physical tests on round wires/formed wires- Mass of zinc coating)	-	0	-
Cl-14.6 (g)(Physical tests on round wires/formed wires- Resistivity.)	-	0	-
Cl-10, 13, 15(Test for thickness of insulation and sheath)	-	0	-
Cl-16.1 (v) (1)(PVC Sheath- Tensile strength and elongation at break;)	-	0	-
Cl-16.1 (v) (2)(PVC Sheath- Ageing in air oven)	-	0	-
Cl-16.1 (v) (3)(PVC Sheath- Loss of mass in air oven)	-	0	-
Cl-16.1 (v) (5)(PVC Sheath- Hot deformation test)	-	0	-
Cl-16.1 (v) (6)(PVC Sheath- Heat shock test)	-	0	-
Cl-16.1 (v) (7)(PVC Sheath- Thermal stability)	-	0	-
Cl-8.3-Table 1A(PE Sheath- Carbon black content)	-	0	-
Cl-8.3-Table 1A(PE Sheath- Tensile strength and elongation at break before and after ageing)	-	0	-
Cl-8.3-Table 1A(PE Sheath- Hot deformation)	-	0	-
Cl-8.3-Table 1A(PE Sheath- Shrinkage test.)	-	0	-
Cl- Table 1B(LSHF Sheath- Tensile strength and elongation at break before and after ageing)	-	0	-
Cl- Table 1B(LSHF Sheath- Hot deformation)	-	0	-
Cl- Table 1B(LSHF Sheath- Water absorption test)	-	0	-
Cl- Table 1B(LSHF Sheath- Shrinkage test)	-	0	-
Cl-17.2(High voltage test)	-	0	-
Cl-17.3(Flammability test)	-	0	-
Cl-17.4(Oxygen index test (FR, FR-LSH or LSHF Sheath))	-	0	-
Cl-17.5(Flame retardance test on single cable)	-	0	-
Cl-17.6(Flame retardance test on bunched cables (FR, FR-LSH or LSHF Sheathed Cables))	-	0	-
Cl-17.7(Test for halogen acid evolution (FR-LSH or LSHF Outer Sheath))	-	0	-
Cl-17.8(Smoke density test (FR-LSH or LSHF Sheath))	-	0	-
Cl-17.9(Temperature index test; (FR, FR-LSH or LSHF Sheath))	-	0	-
Cl-17.10(Test for pH and conductivity of LSHF Sheath)	-	0	-
Cl-17.11(Test for light transmission for LSHF Sheathed Cables)	-	0	-
Cl-16.4 (i)(Cold bend test for outer sheath)	-	0	-
Cl-16.4 (ii)(Cold impact test for outer sheath)	-	0	-
Cl-16.4 (iii)(Cold elongation test for LSHF sheath)	-	0	-
Cl-4(Conductors -Material)	-	0	-
Cl-5, Table-1 (i)(Tensile strength)	-	0	-
Cl-5, Table-1 (ii) (a)(Elongation at break- Ageing in air oven)	-	0	-
Cl-5, Table-1 (ii) (b)(Variation in tensile strength, from that without ageing)	-	0	-
Cl-5, Table-1 (ii) (c)(Variation in elongation at break, from that without ageing)	-	0	-
Cl-5, Table-1 (iii) (a)(Hot set- Treatment;)	-	0	-
Cl-5, Table-1 (iii) (b)(Hot set- Elongation under load)	-	0	-
Cl-5, Table-1 (iii) (c)(Hot set- Permanent elongation after cooling)	-	0	-
Cl-5, Table-1 (iv)(Shrinkage)	-	0	-
Cl-5, Table-1 (v)(Water absorption (gravimetric))	-	0	-
Cl-5, Table-1 (vi)(Volume resistivity)	-	0	-
Cl-6.1 (a)(Fillers and inner sheath- Vulcanized or unvulcanized rubber)	-	0	-
Cl-6.1 (B)(Fillers and inner sheath- Thermoplastic materials)	-	0	-
Cl-7(Armouring)	-	0	-
Cl-8(Outer Sheath)	-	0	-
Cl-10.3(Tolerance on Thickness of Insulation)	-	0	-
Cl-11(Core Identification)	-	0	-
Cl-12(Laying up of Cores)	-	0	-
Cl-13(Inner Sheath (Common Covering))	-	0	-
Cl-14.1(Armouring- Application)	-	0	-
Cl-14.1.2(armour round wires/formed wires)	-	0	-
Cl-14.2(Type of Armour)	-	0	-
Cl-14.3(Dimensions)	-	0	-
Cl-14.4(Joints)	-	0	-
Cl-14.5(Resistance)	-	0	-
Cl-15.3(Thickness of Outer Sheath)	-	0	-
Cl-16.1 (i) (a)(Test on conductor: Annealing test (for copper);)	-	0	-
Cl-16.1 (i) (b)(Test on conductor: Tensile test (for aluminium);)	-	0	-
Cl-16.1 (i) (c)(Test on conductor: Wrapping test (for aluminium);)	-	0	-
Cl-16.1 (i) (d)(Test on conductor: Resistance test)	-	0	-
Cl-14.6 (a)(Physical tests on round wires/formed wires- Tensile strength)	-	0	-
Cl-14.6 (b)(Physical tests on round wires/formed wires- Elongation at break)	-	0	-
Cl-14.6 (c)(Physical tests on round wires/formed wires- Torsion test for round wires)	-	0	-
Cl-14.6 (d)(Physical tests on round wires/formed wires- Winding test for formed wires)	-	0	-
Cl-14.6 (e)(Physical tests on round wires/formed wires- Uniformity of zinc coating)	-	0	-
Cl-14.6 (f)(Physical tests on round wires/formed wires- Mass of zinc coating)	-	0	-
Cl-14.6 (g)(Physical tests on round wires/formed wires- Resistivity.)	-	0	-
Cl-10, 13, 15(Test for thickness of insulation and sheath)	-	0	-
Cl-16.1 (v) (1)(PVC Sheath- Tensile strength and elongation at break;)	-	0	-
Cl-16.1 (v) (2)(PVC Sheath- Ageing in air oven)	-	0	-
Cl-16.1 (v) (3)(PVC Sheath- Loss of mass in air oven)	-	0	-
Cl-16.1 (v) (5)(PVC Sheath- Hot deformation test)	-	0	-
Cl-16.1 (v) (6)(PVC Sheath- Heat shock test)	-	0	-
Cl-16.1 (v) (7)(PVC Sheath- Thermal stability)	-	0	-
Cl-8.3-Table 1A(PE Sheath- Carbon black content)	-	0	-
Cl-8.3-Table 1A(PE Sheath- Tensile strength and elongation at break before and after ageing)	-	0	-
Cl-8.3-Table 1A(PE Sheath- Hot deformation)	-	0	-
Cl-8.3-Table 1A(PE Sheath- Shrinkage test.)	-	0	-
Cl- Table 1B(LSHF Sheath- Tensile strength and elongation at break before and after ageing)	-	0	-
Cl- Table 1B(LSHF Sheath- Hot deformation)	-	0	-
Cl- Table 1B(LSHF Sheath- Water absorption test)	-	0	-
Cl- Table 1B(LSHF Sheath- Shrinkage test)	-	0	-
Cl-17.2(High voltage test)	-	0	-
Cl-17.3(Flammability test)	-	0	-
Cl-17.4(Oxygen index test (FR, FR-LSH or LSHF Sheath))	-	0	-
Cl-17.5(Flame retardance test on single cable)	-	0	-
Cl-17.6(Flame retardance test on bunched cables (FR, FR-LSH or LSHF Sheathed Cables))	-	0	-
Cl-17.7(Test for halogen acid evolution (FR-LSH or LSHF Outer Sheath))	-	0	-
Cl-17.8(Smoke density test (FR-LSH or LSHF Sheath))	-	0	-
Cl-17.9(Temperature index test; (FR, FR-LSH or LSHF Sheath))	-	0	-
Cl-17.10(Test for pH and conductivity of LSHF Sheath)	-	0	-
Cl-17.11(Test for light transmission for LSHF Sheathed Cables)	-	0	-
Cl-16.4 (i)(Cold bend test for outer sheath)	-	0	-
Cl-16.4 (ii)(Cold impact test for outer sheath)	-	0	-
Cl-16.4 (iii)(Cold elongation test for LSHF sheath)	-	0	-
Cl-4(Conductors -Material)	-	0	-
Cl-5, Table-1 (i)(Tensile strength)	-	-	-
Cl-5, Table-1 (ii) (a)(Elongation at break- Ageing in air oven)	-	-	-
Cl-5, Table-1 (ii) (b)(Variation in tensile strength, from that without ageing)	-	-	-
Cl-5, Table-1 (ii) (c)(Variation in elongation at break, from that without ageing)	-	-	-
Cl-5, Table-1 (iii) (a)(Hot set- Treatment;)	-	-	-
Cl-5, Table-1 (iii) (b)(Hot set- Elongation under load)	-	-	-
Cl-5, Table-1 (iii) (c)(Hot set- Permanent elongation after cooling)	-	-	-
Cl-5, Table-1 (iv)(Shrinkage)	-	-	-
Cl-5, Table-1 (v)(Water absorption (gravimetric))	-	-	-
Cl-5, Table-1 (vi)(Volume resistivity)	-	-	-
Cl-6.1 (a)(Fillers and inner sheath- Vulcanized or unvulcanized rubber)	-	-	-
Cl-6.1 (B)(Fillers and inner sheath- Thermoplastic materials)	-	-	-
Cl-7(Armouring)	-	-	-
Cl-8(Outer Sheath)	-	-	-
Cl-10.3(Tolerance on Thickness of Insulation)	-	-	-
Cl-11(Core Identification)	-	-	-
Cl-12(Laying up of Cores)	-	-	-
Cl-13(Inner Sheath (Common Covering))	-	-	-
Cl-14.1(Armouring- Application)	-	-	-
Cl-14.1.2(armour round wires/formed wires)	-	-	-
Cl-14.2(Type of Armour)	-	-	-
Cl-14.3(Dimensions)	-	-	-
Cl-14.4(Joints)	-	-	-
Cl-14.5(Resistance)	-	-	-
Cl-15.3(Thickness of Outer Sheath)	-	-	-
Cl-16.1 (i) (a)(Test on conductor: Annealing test (for copper);)	-	-	-
Cl-16.1 (i) (b)(Test on conductor: Tensile test (for aluminium);)	-	-	-
Cl-16.1 (i) (c)(Test on conductor: Wrapping test (for aluminium);)	-	-	-
Cl-16.1 (i) (d)(Test on conductor: Resistance test)	-	-	-
Cl-14.6 (a)(Physical tests on round wires/formed wires- Tensile strength)	-	-	-
Cl-14.6 (b)(Physical tests on round wires/formed wires- Elongation at break)	-	-	-
Cl-14.6 (c)(Physical tests on round wires/formed wires- Torsion test for round wires)	-	-	-
Cl-14.6 (d)(Physical tests on round wires/formed wires- Winding test for formed wires)	-	-	-
Cl-14.6 (e)(Physical tests on round wires/formed wires- Uniformity of zinc coating)	-	-	-
Cl-14.6 (f)(Physical tests on round wires/formed wires- Mass of zinc coating)	-	-	-
Cl-14.6 (g)(Physical tests on round wires/formed wires- Resistivity.)	-	-	-
Cl-10, 13, 15(Test for thickness of insulation and sheath)	-	-	-
Cl-16.1 (v) (1)(PVC Sheath- Tensile strength and elongation at break;)	-	-	-
Cl-16.1 (v) (2)(PVC Sheath- Ageing in air oven)	-	-	-
Cl-16.1 (v) (3)(PVC Sheath- Loss of mass in air oven)	-	-	-
Cl-16.1 (v) (5)(PVC Sheath- Hot deformation test)	-	-	-
Cl-16.1 (v) (6)(PVC Sheath- Heat shock test)	-	-	-
Cl-16.1 (v) (7)(PVC Sheath- Thermal stability)	-	-	-
Cl-8.3-Table 1A(PE Sheath- Carbon black content)	-	-	-
Cl-8.3-Table 1A(PE Sheath- Tensile strength and elongation at break before and after ageing)	-	-	-
Cl-8.3-Table 1A(PE Sheath- Hot deformation)	-	-	-
Cl-8.3-Table 1A(PE Sheath- Shrinkage test.)	-	-	-
Cl- Table 1B(LSHF Sheath- Tensile strength and elongation at break before and after ageing)	-	-	-
Cl- Table 1B(LSHF Sheath- Hot deformation)	-	-	-
Cl- Table 1B(LSHF Sheath- Water absorption test)	-	-	-
Cl- Table 1B(LSHF Sheath- Shrinkage test)	-	-	-
Cl-17.2(High voltage test)	-	-	-
Cl-17.3(Flammability test)	-	-	-
Cl-17.4(Oxygen index test (FR, FR-LSH or LSHF Sheath))	-	-	-
Cl-17.5(Flame retardance test on single cable)	-	-	-
Cl-17.6(Flame retardance test on bunched cables (FR, FR-LSH or LSHF Sheathed Cables))	-	-	-
Cl-17.7(Test for halogen acid evolution (FR-LSH or LSHF Outer Sheath))	-	-	-
Cl-17.8(Smoke density test (FR-LSH or LSHF Sheath))	-	-	-
Cl-17.9(Temperature index test; (FR, FR-LSH or LSHF Sheath))	-	-	-
Cl-17.10(Test for pH and conductivity of LSHF Sheath)	-	-	-
Cl-17.11(Test for light transmission for LSHF Sheathed Cables)	-	-	-
Cl-16.4 (i)(Cold bend test for outer sheath)	-	-	-
Cl-16.4 (ii)(Cold impact test for outer sheath)	-	-	-
Cl-16.4 (iii)(Cold elongation test for LSHF sheath)	-	-	-
Cl-4(Conductors -Material)	-	-	-

03 Apr, 2027

-
Included w.e.f.10.09.2025

3773

Elutech Laboratory and Calibration Services, Jaipur

9179806

IS 1117 (2018)

Laboratory glassware - Single - Volume pipettes (Second Revision)

Class- A, AS & B, Cap. upto 100 ml, Both One & Two mark

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.1&3(Marking)	-	15000	Complete testing charges for the product (Excluding raw material) is Rs. 15000
3(Class of Accuracy)	-	15000	-
4.1(Nominal capacities)	-	15000	-
4.2(Accuracy)	-	15000	-
5.1(Material)	-	15000	-
5.1.1(Limit of Alkalinity)	-	15000	-
5.2(Pattern of Pipette)	-	15000	-
5.3(Workmanship & Finish)	-	15000	-
5.4(i) Distance of graduation line from top of pipette.)	-	15000	-
5.4(ii) Distance from graduation line to top of bulb(pattern 2))	-	15000	-
5.4(iii)Distance from graduation line to tip of jet (Pattern 1))	-	15000	-
5.4(iv) Wall thickness)	-	15000	-
5.4(a) pattern 2 pipette of 1 and 2ml )	-	15000	-
5.4(b) Other pipettes)	-	15000	-
5.4(v) Dia. of safety bulb (if provided ))	-	15000	-
5.4(vi)Distance from top of pipette to bottom of safety bulb )	-	15000	-
5.4(vii) Overall length, L)	-	15000	-
5.4(viii) Length of suction tube, L1 )	-	15000	-
5.4(ix) Length of delivery tube, L2 )	-	15000	-
5.4(x) Internal dia. of suction tube D1 )	-	15000	-
5.4(xi) External dia. of bulb D2 )	-	15000	-
5.4(xii) External dia. of delivery tube D3 )	-	15000	-
5.5(Delivery Time)	-	15000	-
5.5(Delivery Time)	-	15000	-
5.6&7(Graduation line & Visibility )	-	15000	-
6.1.2(Marking)	-	15000	-
6.1.1&3(Marking)	-	15000	-
3(Class of Accuracy)	-	15000	-
4.1(Nominal capacities)	-	15000	-
4.2(Accuracy)	-	15000	-
5.1(Material)	-	15000	-
5.1(Material)	-	15000	-
5.1.1(Limit of Alkalinity)	-	15000	-
5.2(Pattern of Pipette)	-	15000	-
5.3(Workmanship & Finish)	-	15000	-
5.4(i) Distance of graduation line from top of pipette.)	-	15000	-
5.4(ii) Distance from graduation line to top of bulb(pattern 2))	-	15000	-
5.4(iii)Distance from graduation line to tip of jet (Pattern 1))	-	15000	-
5.4(iv) Wall thickness)	-	15000	-
5.4(a) pattern 2 pipette of 1 and 2ml )	-	15000	-
5.4(b) Other pipettes)	-	15000	-
5.4(v) Dia. of safety bulb (if provided ))	-	15000	-
5.4(vi)Distance from top of pipette to bottom of safety bulb )	-	15000	-
5.4(vii) Overall length, L)	-	15000	-
5.4(viii) Length of suction tube, L1 )	-	15000	-
5.4(ix) Length of delivery tube, L2 )	-	15000	-
5.4(x) Internal dia. of suction tube D1 )	-	15000	-
5.4(xi) External dia. of bulb D2 )	-	15000	-
5.4(xii) External dia. of delivery tube D3 )	-	15000	-
5.5(Delivery Time)	-	15000	-
5.5(Delivery Time)	-	15000	-
5.6&7(Graduation line & Visibility )	-	15000	-
6.1.2(Marking)	-	15000	-
6.1.1&3(Marking)	-	15000	-
3(Class of Accuracy)	-	15000	-
4.1(Nominal capacities)	-	15000	-
4.2(Accuracy)	-	15000	-
5.1(Material)	-	15000	-
5.1(Material)	-	15000	-
5.1.1(Limit of Alkalinity)	-	15000	-
5.2(Pattern of Pipette)	-	15000	-
5.3(Workmanship & Finish)	-	15000	-
5.4(i) Distance of graduation line from top of pipette.)	-	15000	-
5.4(ii) Distance from graduation line to top of bulb(pattern 2))	-	15000	-
5.4(iii)Distance from graduation line to tip of jet (Pattern 1))	-	15000	-
5.4(iv) Wall thickness)	-	15000	-
5.4(a) pattern 2 pipette of 1 and 2ml )	-	15000	-
5.4(b) Other pipettes)	-	15000	-
5.4(v) Dia. of safety bulb (if provided ))	-	15000	-
5.4(vi)Distance from top of pipette to bottom of safety bulb )	-	15000	-
5.4(vii) Overall length, L)	-	15000	-
5.4(viii) Length of suction tube, L1 )	-	15000	-
5.4(ix) Length of delivery tube, L2 )	-	15000	-
5.4(x) Internal dia. of suction tube D1 )	-	15000	-
5.4(xi) External dia. of bulb D2 )	-	15000	-
5.4(xii) External dia. of delivery tube D3 )	-	15000	-
5.5(Delivery Time)	-	15000	-
5.5(Delivery Time)	-	15000	-
5.6&7(Graduation line & Visibility )	-	15000	-
6.1.2(Marking)	-	15000	-
5.1(Material)	-	15000	-
4.1(unit of volume)	-	15000	-
4.2(delivery volume)	-	15000	-
4.3(reference temperature)	-	15000	-
5.1(Types and Classes of accuracy)	-	15000	-
5.2(Types of single- volume pipette)	-	15000	-
Clause- 6.0(Maximum Permissible error)	-	15000	-
7.1(Material)	-	15000	-
7.2(Shape)	-	15000	-
7.3(Bulb)	-	15000	-
7.4(Dimensions)	-	15000	-
7.5(Top of Pipette)	-	15000	-
7.6(Delivery Jet)	-	15000	-
7.7(Delivery Time)	-	15000	-
7.8(Waiting Time)	-	15000	-
Clause- 8.0(Graduation Line)	-	15000	-
Clause- 9.0(Setting of the Meniscus)	-	15000	-
Clause-10.0(Marking)	-	15000	-
Cl-7.4, Table-2 (i)(Overall length)	-	15000	-
Cl-7.4, Table-2 (ii)(Internal diameter at the graduation line)	-	15000	-
Cl-7.4, Table-2 (iii)(Length of suction tube⎯ valid only for bulb pattern pipettes)	-	15000	-
Cl-7.4, Table-2 (iv)(Length of delivery tube ⎯ valid only for bulb pattern pipettes)	-	15000	-
Cl-7.4, Table-2 (v)(External diameter of delivery tube ⎯ valid only for bulb pattern pipettes)	-	15000	-
Cl-7.4, Table-2 (vi)(External diameter of bulb ⎯ valid only for bulb pattern pipettes)	-	15000	-
Cl-7.4, Table-2 (vii)(External diameter of tube ⎯ valid only for straight pattern pipettes)	-	15000	-
Cl-7.4, Table-3 (i)(Distance of graduation line from top of pipette (one-mark pipettes))	-	15000	-
Cl-7.4, Table-3 (ii)(Distance from graduation line to tip of jet (one-mark pipettes) ⎯ valid only for straight pattern pipettes)	-	15000	-
Cl-7.4, Table-3 (iii)(Distance from graduation line to tip of jet (one-mark pipettes) ⎯ valid only for straight pattern pipettes)	-	15000	-
Cl-7.4, Table-3 (iv)(Wall thickness (one-mark pipettes) ⎯ bulb pattern pipettes)	-	15000	-
Cl-7.4, Table-3 (v)(Wall thickness (one-mark pipettes) ⎯ straight pattern pipettes)	-	15000	-
Cl-7.4, Table-4 (i)(Distance of upper graduation line from top of pipette (two-mark pipettes))	-	15000	-
Cl-7.4, Table-4 (ii)(Distance of upper graduation line from top of pipette (two-mark pipettes))	-	15000	-
Cl-7.4, Table-4 (iii)(Distance from upper graduation line to tip of jet (two-mark pipettes) ⎯ valid only for straight pattern pipettes)	-	15000	-
Cl-7.4, Table-4 (iv)(Distance from lower graduation line to bottom of bulb (two-mark pipettes))	-	15000	-
Cl-7.4, Table-4 (v)(Distance from lower graduation line to tip of jet (two-mark pipettes))	-	15000	-
Cl-7.4, Table-4 (vi)(Wall thickness (two-mark pipettes) ⎯ bulb pattern pipettes)	-	15000	-
Cl-7.4, Table-4 (vii)(Wall thickness (two-mark pipettes) ⎯ straight pattern pipettes)	-	15000	-
Cl-11(Visibility of graduation lines, figures and inscriptions)	-	15000	-
Cl-12(Colour coding)	-	15000	-
Cl-12(Colour coding)	-	15000	-

26 Aug, 2027

-
-

3774

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 17546 (2021)

Chlorinated polyvinyl chloride CPVC fittings for potable hot and cold water distribution supplies Specification

all

135000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Nominal Size(DN))	-	135000	-
3.2(Nominal Outside Diameter)	-	135000	-
3.3(Mean Inside Diameter of Socket at Entry)	-	135000	-
3.4(Mean Inside Diameter of Socket at Shoulder (Bottom))	-	135000	-
3.4(Mean Inside Diameter of Socket at Shoulder (Bottom))	-	135000	-
3.5(Out-of-Roundness (Ovality))	-	135000	-
3.6(Nominal Wall Thickness)	-	135000	-
3.7(Minimum Wall Thickness)	-	135000	-
3.8(Tolerance)	-	135000	-
3.9(Working Pressure)	-	135000	-
3.1(Standard Dimension Ratio)	-	135000	-
3.11(Type Tests)	-	135000	-
3.11(Acceptance Tests)	-	135000	-
6(Composition)	-	135000	-
7(Dimensions of fitting)	-	135000	-
8.2(Opacity)	-	135000	-
8.1(Visual Appearance)	-	135000	-
8.3(Stress Relief Test)	-	135000	-
8.4(Vicat softening Temperature)	-	135000	-
8.5(Density)	-	135000	-
8.6(Effect on water)	-	135000	-
9(Mechanical Properties)	-	135000	-
11(Marking)	-	135000	-
Cl-6.2.2(Compound Chlorine Content)	-	135000	-
Cl-6.2.5(Verification of the Malfunction Temperature)	-	135000	-
Cl-9.1(Hydrostatic Characteristics)	-	135000	-
Cl-9.2(Thermal Stability by Hydrostatic Pressure Testing)	-	135000	-

08 May, 2028

-
Included w.e.f 13.11.2025

3775

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 15801 (2008)

Polypropylene - Random copolymer pipes for hot and cold water supplies - Specification

all

135000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4( Designation)	-	135000	-
Cl 7(Dimensions Of Pipes)	-	135000	-
Cl 8(Visual Appearance)	-	135000	-
Cl 9.1(Hydraulic Characteristics)	-	135000	-
Cl 9.2(Fusion Compatibility)	-	135000	-
Cl 9.3(Reversion Test )	-	135000	-
Cl 9.4 & Annex B(Impact Strength)	-	135000	-
Cl 9.5(Density)	-	135000	-
Cl 9.6(Melt Flow Rate)	-	135000	-
Cl 9.7(Carbon Black Content & Dispersion)	-	135000	-
Cl 9.8(Thermal Stability By Hydrostatic Pressure Testing)	-	135000	-
Cl 9.9(Opacity)	-	135000	-
5(Colour)	-	135000	-

08 May, 2028

-
Included w.e.f.25.08.2025

3776

Dashmesh Test Lab Private Limited

8186926

IS 17153 (2019)

Domestic gas stoves for use with piped natural gas (PNG) - Specification

ALL TYPE

41500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
26(Burner-5)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
26(Burner-4)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
26(Burner-3)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
26(Burner-2)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
26(Burner-1)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
25.2(With the Burner lighted on full on, the flame temperature at a height of H+20 mm)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
25.1(Temperature of synthetic rubber diaphragm in gas carrying components)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
25.1(Temperature of the surface in normal use)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
25.1(Temperature of the portion of the surface other than the working surface likely to be touched accidentally.)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
25.1(Rise of Temperature above room temperature in (Wall, Floor, Ceiling), after two hours of operation)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
24(Burner-5)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
24(Burner-4)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
24(Burner-3)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
24(Burner-2)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
24(Burner-1)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
23(When operated at pressure 20-25 gf/cm2 , there shall be no extinction of flame on any of the burneroperating at the max of the burner, when the appliance is placed in normal current of air with velocity of 2 m/s.)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
22(When operated at pressure 20-25 gf/cm2 , for one at full on position, no soot shall be deposited on burner or on the bottom of the vessel.)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
21(When operated at pressure 20-25 gf/cm2 for half an hour flame shall be reduced to simmer and then brought back to full on, operation shall be repeated five times, no flash back shall occur during the test.)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
20(Ignition of Burner flame, their operation and turning off shall not give rise to undue excessive noise during the operation.)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
19.3(Fixed Min Pilot flame shall be sufficient to relight the main burner at the 21 mbar gas inlet pressure.)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
19.2(Pilot Flame shall be Stable without lifting or soot deposition at gas inlet pressure from 20-25 gf/cm2)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
19.1.1(When the gas consumption of the burner is reduced to simmer after operating half an hour on full ON flame shall not extinguish, blow off, strike back or form soot at 21 mbar gas inlet pressure.)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
19.1(It shall be possible to operate stove with taps fully open at gas inlet pressure , without the flame extinguishing, blowing off or striking back and without the formation of soot.)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
18.4.1(The flame failure device if provided shall confirm to IS:5116)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
18.3(When the burner is ignited from a pilot flame and/or by an electric/electronic method, the ignition and flame travel shall be smooth at pressure……..)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
18.2(if the flame is applied to any of the outer row of the burner ports when the gas is flowing , flame travel shall be complete……..)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
18.1(Where the burner or burners are lighted by automatic ignition (Battery of flint operated or by a pilot flame , it shall not be possible for gas to be admitted to the main burner without being smoothly ignited by the pilot flame. Each burner should be at room temperature at the begining of the test and should be tested in turn. )	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
18.1(There shall be easy and safe access of lighting each burner by matchstick and it shall be easy to see that the burner is lighted)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
17.3(When the gas consumption of the burner is reduced to simmer, the flame shall not extinguish, blow off, strike back or form soot, when tested with commercial PNG at 21 mbar gas inlet pressure.)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
17.2(Burner-5)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
17.2(Burner-4)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
17.2(Burner-3)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
17.2(Burner-2)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
17.2(Burner-1)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
17.2(Sim Rating Declared)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
17.1.2(Total Gas Consumption)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
17.1(Burner-5)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
17.1(Burner-4)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
17.1( Burner-3)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
17.1( Burner-2)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
17.1( Burner-1)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
17.1(Rating Declared)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
15.2(Fragmentation test of the toughened glass to )	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
15.1(Verification of the strength of the gas stove surface of the toughened glass top against thermal stress)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
15(Width wise deflection)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
15(Length wise deflection)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
15(Vertical Deflection)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
14.5(The position of the gas inlet shall allow connection to a gas supply on either side of the appliances, the rear end or bottom is also permitted. It shall be possible to change gas inlet from one side to other side easily by standard tools.)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
14.4(Any other connection made from the main gas rail shall be only metallic.)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
14.4(The external surface of the gas rail shall be treated to resist corrosion)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
14.4(The wall thickness of main gas rail)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
14.4(The pipe/tube used for main gas rail shall be of mild steel)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
14.3(Screwed gas Inlet and outlet connections shall confirm to IS:554, Declared by party)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
14.2((e))	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
14.2((d))	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
14.2(( c))	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
14.2((b))	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
14.2(Shape of Nozzles as per fig. 3 : (a))	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
14.2(Where Nozzles for flexible tubing are fitted, they shall be so positioned as to facilitate fitting of the tubing and also to prevent heating of the tubing to more than 60°C)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
14.1(Nozzle shall be machined from free cutting brass, MS, SS, Zinc)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
13(All gas carrying parts of the appliances should be sound and these parts when connected to form complete assembly shall also be sound against any gas leakage. The complete assembly shall be checked at 14.71 kN/m²)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
12.1.2(The material of the pan support shall be metallic.)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
12.1.1(Loose Pan support shall be so designed that it is not possible to place them firmly in other than proper position)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
12.1(Prongs of the Support shall have suitable taper to accommodate round bottom pans.)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
12.1(The design of the pan supports shall be such that it is practicable to support a pan of 100 mm diameter over at least one top burner without the use of loose rings and such that 125 mm diameter vessel remains stable over each burner. )	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
11.7(The appliance comprising two or more burners shall include one burner having a rating of at least 1450 kCal/hr, based on net calorific value of the gas (When using domestic PNG))	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
11.6(For Burners having centre flame, provision shall be made to protect the centre flame from pan resting directly on burner top and smothering the centre flame. )	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
11.5(If the burner is made and assembled in two or more parts they shall be so designed to provide proper self locating arrangement so that they are always reassembled to its original design preventing any maladjustment in their assembly. This shall also be applicable for primary air regulators.)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
11.4(If primary air regulators are used, they shall be so designed that they are not easily maladjusted by the user and the construction shall be such that primary air adjustment can be made with the burner in place.)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
11.3(The tightness of the joints in the burner assembly shall not be depended upon adhesives or any kind of packing.)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
11.2(The Burner supports shall be rigid and shall be fixed in their place. Their construction shall ensure the stability of the burners and shall prevent their undue movement in a horizontal plane.)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
11.1(The construction of the burners and the assembly shall allow their dismantling from the supports easily with or without the use of tools)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
10.2(The Size of the jet in Litres per hour of flow of PNG at STP conditions shall be impressed upon it.)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
10.1.1(Injector Jet shall be made of metal , with or without ceramic tip. The melting point of the metal shall not be less than 650°C)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
10.1(Dimension- Threads)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
10.1(Dimension- Projection from the face of mounting, Nominal)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
10.1(Dimension- Across Flats)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
10.1(The Injector Jets shall be fixed calibrated type and it shall not be possible to loosen them without the use of tools.)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
9.12(The noting means adopted shall be sufficiently robust to withstand normal use without distortion or damage.)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
9.11.1(Simmer flame shall be obtained by fixed simmer orifice.)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
9.11(Taps having an 'OFF' position shall have positive stops at the 'OFF' and simmer position except that special purpose taps (for appliance incorporating auto or self ignition device))	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
9.1(Screw-down valves shall be so designed that it is impossible to withdraw completely the valve stem in the normal operation of the tap.)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
9.9(Screws nuts etc., which regulate the tension of taps valve or springs shall not loosen in operation of the appliance. It shall not be possible to cause a leak during normal manual operation of tap.)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
9.8(All controls or taps shall be easy to operate at all temperatures normally attained in use)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
9.7(C1)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
9.7(B1)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
9.7(A1)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
9.7(D)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
9.7(C)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
9.7(B)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
9.7(A)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
9.7(Dimension of Taper plugs in off position:)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
9.6(Each taper plug tap shall be spring loaded to maintain a gas tight fit. Helical springs fitted in taps and valves shall have flattened ends, which shall be rounded before fitting.)	-	4150041500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
9.5.1(Taps shall be lubricated with suitable grease, resistant to the action of the gas and capable of operating at the maximum temperature of 110°C.)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
9.5(Taps shall be so made that in normal use and reasonable application of lubricant, the gas passages do not become blocked.)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
9.4(Preferably all taps (Excluding pilot taps) should lock in the off position, but in all cases it shall be impossible to handle or tap to move accidentally…. )	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
9.3(When Taps are fitted with adjustable stops, there shall be means of looking the stops in position. If screws are used for this purpose, they shall not lead into gas passages.)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
9.2(Taps shall be designed so that when placed in any position and viewed from a distance of 3 m, will definitely indicate whether the valve is open, closed or in intermediate position.)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
9.2(All Taps shall close in the same direction. The direction of rotation of knob from off-on-simmer shall be anti-clockwise.)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
9.2(The 'ON' "OFF" and any fixed position of tap handles shall be clearly and durably indicated or shall be obvious by design or position else some indication shall be provided.)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
9.1(The Appliance shall have at least one tap for each burner)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
8.7(The external Finished surfaces shall be easily cleanable.)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
8.6(All springs, screws, nuts and bolts which are visible or to be removed for maintenance, shall be of corrosion-resistant material or treated to resist corrosion.)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
8.5(Concealed Gas Supplies: Concealed tubular fittings liable to corrode shall be protected by bituminous paint or other equally protective material.)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
8.4 (b)(Resistance to Heating)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
8.4 (a)(Resistance to Abrasion)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
8.3.3(Corrosion Resistance test)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
8.3.2(Adhesion Test)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
8.3.1(Thickness of Chromium coating)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
8.3(Thickness of Nickel coating of the top flat surface of the body of electroplated stove.)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
8.2(Vitreous enameled component shall meet the requirement when tested in accordance with Annex E of IS:5116)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
8.1(The finishes shall, on visual examination, show no defects, such as pin-holes, blisters, roughness or exposed area of metal, which give rise to undualy rapid deterioration in use.)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
8.1(Parts, which will come in contact with the foodstuff, shall be capable of being hygienically cleaned.)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
8.1(The Finish of exposed parts shall be durable, easy to clean and not subject to excessive deterioration in normal use.)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
7(Rigidity and Stability : The appliance shall be so designed that it remains stable and shall not be easily overturned.)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
6.7(Thickness of Sheet)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
6.6(All nuts, bolts and fittings having spanner flats shall be capable of being moved by suitable spanner or be readily accessible to an adjustable spanner.)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
6.5(Parts, which are intented to be removable by the user, shall be easy to replace correctly and difficult to assemble incorrectly.)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
6.4(Burners and parts of Burner only of same rating , model and make shall be interchangeable or replaceable without effecting performance.)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
6.3(Burner ports shall be so designed and located that in normal use spilage of food shall not cause internal fouling of mixing tube and or blockage of injector jet.)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
6.2(The relative distance between the centres of the adjoining burner-)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
6.2(the parts of the burner shall not become disconnected during operation of the appliance.)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
6.1(The appliance, including all the component parts, shall be easy to clean and maintain in good working order, there shall be easy access to the accessories and controls for maintenance and adjustment.)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
5.8.3(The number of glass fragments contained in a 50 mm side square, when tested as Cl. 15.2)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
5.8.3(Toughened glass shall fragment into small particles.)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
5.8.2(Pan support for an uncovered burner in contact with the glass ceramic surface.The surface area of the pan support in contact with the glass ceramic)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
5.8.2(The toughened glass top shall ensure durability against damage in normal use)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
5.8.2(The means to hold the glass top of the gas stove shall not allow any stress or risk of mechanical change to the glass top.)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
5.8.1(Toughened glass top including their edges or corners shall not have fissures or scratches)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
5.7(Drip tray if provided shall be made of non-corrosive material)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
5.6(Meltiing poin of metal used in oven, griller or auxilliary or anyother combination)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
5.6(Melting point of metal for burner top)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
5.5(The main body of the burner including mixer head, mixing tube and burner head shall be of substantial and durable construction)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
5.4(Change in weight or volume of a non metallic material, when immerse in n-Pentane or PNG for 72 hours)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
5.3(Mercurous Nitrate test for copper and copper alloy Parts)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
5.2(The burner parts shall not melt or distort when burner is operated with flames flashed back for half an hour in the mixing tube.)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
5.1.1(Plastic components which are liable to heating (For example, tap handles push buttons etc.) shall be free of fissures, distortion, blemishes and discolouration)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
5.1(The use of low pressure rubber or plastic tubing fitted or pushed on nozzle is not recommended.)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
5.1(If flexible tubing is used, it shall not be fitted on the outlet side of any control which is capable of cutting of the gas completely, except where screwed metal connection are fitted.)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
5.1(The appliance shall be free from swarf, grit and other foreign matters.)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
4.3(No pressure regulator shall be included as part of the stove.)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
4.2(Rivets, Fastening screws and plugs , etc. shall not lead into gas passages.)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
4.1(The construction of all the parts of equipment shall be sound and of high standard of workmanship and appropriate finish. The construction shall ensure durability and shall comply with the safety requirements.)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
4.1(General)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
4.2(General)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
4.3(General)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
5.1(Materials)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
5.1(Materials)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
5.1(Materials)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
5.1(Materials)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
5.1.1(Materials)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
5.2(Materials)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
5.3(Materials)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
5.4(Materials)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
5.5(Materials)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
5.5(Materials)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
5.5(Materials)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
5.7(Materials)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
5.8.1(Materials)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
26(Thermal Efficiency)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
5.8.2 (a)(Materials)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
5.8.2 (a)(Materials)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
5.8.2 (a)(Materials)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
26(Thermal Efficiency)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
5.8.2 (a)(Materials)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
5.8.2 (a)(Materials)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
26(Thermal Efficiency)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
5.8.2 (a)(Materials)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
26(Thermal Efficiency)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
5.8.2 (b)(Materials)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
26(Thermal Efficiency)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
5.8.2 (c )(Materials)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
25.2(Fire Hazard and Limiting Temperature)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
5.8.2 (d)(Materials)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
25.1(Fire Hazard and Limiting Temperature)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
5.8.2 (d)(Materials)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
25.1(Fire Hazard and Limiting Temperature)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
25.1(Fire Hazard and Limiting Temperature)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
5.8.2 (e)(Materials)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
25.1(Fire Hazard and Limiting Temperature)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
5.8.2 (e)(Materials)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
5.8.2 (e)(Materials)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
24.2(Combustion)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
5.8.2 (e)(Materials)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
24.1(Combustion)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
5.8.2 (e)(Materials)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
24.1(Combustion)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
5.8.3 (a)(Materials)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
5.8.3 (b)(Materials)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
5.8.3 (c)(Materials)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
22(Formation of soot)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
21(Flash Back)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
5.8.3 (d)(Materials)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
20(Noise Control)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
5.8.3 (e)(Materials)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
5.8.3 (f)(Materials)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
19.3(Flame Stability)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
6.1(Design for Maintenance)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
19.2(Flame Stability)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
6.1(Design for Maintenance)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
19.1.1(Flame Stability)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
6.2(Design for Maintenance)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
6.2(Design for Maintenance)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
19.1(Flame Stability)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
6.3(Design for Maintenance)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
18.4(Ignition and Flame Travel)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
6.4(Design for Maintenance)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
18.3(Ignition and Flame Travel)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
6.5(Design for Maintenance)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
18.2(Ignition and Flame Travel)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
18.1(Ignition and Flame Travel)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
18.1(Ignition and Flame Travel)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
6.6(Design for Maintenance)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
17.0(Gas Consumption)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
6.7(Design for Maintenance)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
17.0(Gas Consumption)	-	4150041500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
17.0(Gas Consumption)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
17.0(Gas Consumption)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
17.0(Gas Consumption)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
17.0(Gas Consumption)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
17.0(Gas Consumption)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
17.0(Gas Consumption)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
17.0(Gas Consumption)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
9.11(Gas Taps)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
7.1(Rigidity and Stability)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
7.2(Rigidity and Stability)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
7.3(Rigidity and Stability)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
8.1(Workmanship and Finish)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
8.1(Workmanship and Finish)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
8.2 & 8.2.1(Workmanship and Finish)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
8.3(Workmanship and Finish)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
8.3(Workmanship and Finish)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
8.3.2(Workmanship and Finish)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
8.4 (a)(Workmanship and Finish)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
8.4 (b)(Workmanship and Finish)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
8.5(Workmanship and Finish)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
8.6(Workmanship and Finish)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
8.7(Workmanship and Finish)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
9.1(Gas Taps)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
9.2(Gas Taps)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
9.2(Gas Taps)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
9.2(Gas Taps)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
9.3(Gas Taps)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
9.4(Gas Taps)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
9.5(Gas Taps)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
9.11.1(Gas Taps)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
9.12(Gas Taps)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
10.1(Injector Jets)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
10.1 (a)(Injector Jets)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
10.1 (b)(Injector Jets)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
10.1 (c )(Injector Jets)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
10.1.1(Injector Jets)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
9.5.1(Gas Taps)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
10.2(Injector Jets)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
9.6(Gas Taps)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
11.1(Burners)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
9.7(Gas Taps)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
11.2(Burners)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
9.7(Gas Taps)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
11.3(Burners)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
9.7(Gas Taps)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
11.4(Burners)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
9.7(Gas Taps)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
9.7(Gas Taps)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
11.5(Burners)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
9.7(Gas Taps)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
11.6(Burners)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
9.7(Gas Taps)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
11.7(Burners)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
9.7(Gas Taps)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
9.8(Gas Taps)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
9.9(Gas Taps)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
9.10(Gas Taps)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
12.1(Pan Supports)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
12.1.1(Pan Supports)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
12.1.2(Pan Supports)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
13.1(Gas Soundness)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
14.1(Gas Inlet Connection)	-	4150041500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
14.2(Gas Inlet Connection)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
14.2(Gas Inlet Connection)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
14.2(Gas Inlet Connection)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
14.2(Gas Inlet Connection)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
14.2(Gas Inlet Connection)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
14.2(Gas Inlet Connection)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
14.2(Gas Inlet Connection)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
14.3(Gas Inlet Connection)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
14.4(Gas Inlet Connection)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
14.4(Gas Inlet Connection)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
14.4(Gas Inlet Connection)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
14.4(Gas Inlet Connection)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
14.5(Gas Inlet Connection)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
14.5(Gas Inlet Connection)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
14.5(Gas Inlet Connection)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
15.0(Strength and Rigidity)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
15.0(Strength and Rigidity)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
15.0(Strength and Rigidity)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
15.0(Strength and Rigidity)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
17.0(Gas Consumption)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
17.0(Gas Consumption)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne
23(Resistance to Draught)	-	41500	Single Burner SS Body – Rs. 19,800/- Glass Top – Rs. 22,800/- Double Burner SS Body – Rs. 24,800/- Glass Top – Rs. 27,800/- Three Burner SS Body – Rs. 29,800/- Glass Top – Rs. 32,800/- Four Burner SS Body – Rs. 34,800/- Glass Top - Rs. 37,800/- Five Burne

22 Jul, 2028

-
Included w.e.f. 14.10.2025

3777

GLOBAL COMPLIANCE LABORATORY INDIA, GHAZIABAD

5172706

IS 302 : Part 2 : Sec 208 (1994)

Safety of household and similar electrtcal appliances: Part 2 particular requirements: Sec 208 single walled baking ovens

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(GENERAL REQUIREMENT)	-	3000	-
4(GENERAL NOTES ON TESTS)	-	3000	-
5(RATING)	-	3000	-
6(CLASSIFICATION)	-	3000	-
7(MARKING)	-	3000	-
8(PROTECTION AGAINST ELECTRIC SHOCK)	-	3000	-
10(INPUT AND CURRENT)	-	3000	-
11(TEMPERATURE RISE)	-	3000	-
12(OPERATLON UNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS)	-	3000	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	3000	-
14(RADIO AND TELEVISION INTERFERENCE SUPPRESSION)	-	3000	-
15(MOISTURE RESESTANCE)	-	3000	-
16(INSULATION RESISTANCE AND ELECTRIC SHOCK STRENGTH ( AFTER HUMIDITY TREATMENT ))	-	3000	-
17(OVERLOAD PROTECTION)	-	3000	-
19(ABNORMAL OPERATION)	-	3000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	3000	-
21(MECHANICAL STRENGTH)	-	3000	-
22(CONSTRUCTION)	-	3000	-
23(INTERNAL WIRING)	-	3000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	3000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	3000	-
27(PROVISION FOR EARTHING)	-	3000	-
28(SCREWS AND CONNECTIONS)	-	3000	-
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	3000	-
30(RESISTANCE TO HEAT, FIRE AND TACKING)	-	3000	-
31(RESISTANCE TO RUSTING)	-	3000	-
101.2(Acceptance Tests)	-	3000	-
101.3(Routine Tests)	-	3000	-
32(RADIATION HAZARDS)	-	3000	-
101.1(Type Tests)	-	3000	-

20 Jun, 2029

-
Included w.e.f 23.09.2025 Exclusion: Cl-19.11.4.1-Cl-19.11.4.7(EMI/EMC), Cl 24 (COMPONENTS)

3778

THE NATIONAL SMALL INDUSTRIES CORPORATION LIMITED, TECHNICAL SERVICES CENTRE - NSIC, Rajpura

9111924

IS 4250 (2025)

Electric Food-Mixers (Liquidizers and Grinders) and Centrifugal Juicers ï¿½ Specification ( Second Revision )

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	100	20% discount to BIS on testing charges
Cl-5(General Conditions for the tests)	-	100	20% discount to BIS on testing charges
Cl-6(Classification)	-	100	20% discount to BIS on testing charges
Cl-7(Marking)	-	100	20% discount to BIS on testing charges
Cl-8(Safety Requirements)	-	9700	Testing charges of test methods from Clause 8 to Clause 32 (20% discount to BIS on testing charges)
Cl-9(Endurance fpr motor and base assembly)	-	6000	20% discount to BIS on testing charges
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	400	20% discount to BIS on testing charges
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	200	20% discount to BIS on testing charges
Cl-10.4(Idli Batter)	-	300	20% discount to BIS on testing charges
Cl-10.5(Operational Tests for Juicers)	-	500	20% discount to BIS on testing charges
Cl-11(Temperature Withstand Test for Bowl)	-	300	20% discount to BIS on testing charges
Cl-12.1(Test for Switches)	-	100	20% discount to BIS on testing charges
Cl-13(Strength of Assembly)	-	100	20% discount to BIS on testing charges
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	500	20% discount to BIS on testing charges
Cl-14.2, Table-2 (ii)(Power input and current)	-	1000	20% discount to BIS on testing charges
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	1000	20% discount to BIS on testing charges
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	1500	20% discount to BIS on testing charges
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	1000	20% discount to BIS on testing charges
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	1000	20% discount to BIS on testing charges
Cl-4(General Requirements)	-	100	20% discount to BIS on testing charges
Cl-5(General Conditions for the tests)	-	100	20% discount to BIS on testing charges
Cl-6(Classification)	-	100	20% discount to BIS on testing charges
Cl-7(Marking)	-	100	20% discount to BIS on testing charges
Cl-8(Safety Requirements)	-	9700	Testing charges of test methods from Clause 8 to Clause 32 (20% discount to BIS on testing charges)
Cl-9(Endurance fpr motor and base assembly)	-	6000	20% discount to BIS on testing charges
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	400	20% discount to BIS on testing charges
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	200	20% discount to BIS on testing charges
Cl-10.4(Idli Batter)	-	300	20% discount to BIS on testing charges
Cl-10.5(Operational Tests for Juicers)	-	500	20% discount to BIS on testing charges
Cl-11(Temperature Withstand Test for Bowl)	-	300	20% discount to BIS on testing charges
Cl-12.1(Test for Switches)	-	100	20% discount to BIS on testing charges
Cl-13(Strength of Assembly)	-	100	20% discount to BIS on testing charges
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	500	20% discount to BIS on testing charges
Cl-14.2, Table-2 (ii)(Power input and current)	-	1000	20% discount to BIS on testing charges
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	1000	20% discount to BIS on testing charges
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	1000	20% discount to BIS on testing charges
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	1000	20% discount to BIS on testing charges
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	1000	20% discount to BIS on testing charges
Cl-4(General Requirements)	-	100	20% discount to BIS on testing charges
Cl-5(General Conditions for the tests)	-	100	20% discount to BIS on testing charges
Cl-6(Classification)	-	100	20% discount to BIS on testing charges
Cl-7(Marking)	-	100	20% discount to BIS on testing charges
Cl-8(Safety Requirements)	-	9700	Cl 8 to Cl 32, 20% discount to BIS on testing charges
Cl-9(Endurance fpr motor and base assembly)	-	6000	20% discount to BIS on testing charges
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	400	20% discount to BIS on testing charges
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	200	20% discount to BIS on testing charges
Cl-10.4(Idli Batter)	-	300	20% discount to BIS on testing charges
Cl-10.5(Operational Tests for Juicers)	-	500	20% discount to BIS on testing charges
Cl-11(Temperature Withstand Test for Bowl)	-	300	20% discount to BIS on testing charges
Cl-12.1(Test for Switches)	-	100	20% discount to BIS on testing charges
Cl-13(Strength of Assembly)	-	100	20% discount to BIS on testing charges
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	500	20% discount to BIS on testing charges
Cl-14.2, Table-2 (ii)(Power input and current)	-	1000	20% discount to BIS on testing charges
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	1000	20% discount to BIS on testing charges
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	1000	20% discount to BIS on testing charges
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	1000	20% discount to BIS on testing charges
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	1000	20% discount to BIS on testing charges
Cl-4(General Requirements)	-	100	20% discount to BIS on testing charges
Cl-5(General Conditions for the tests)	-	100	20% discount to BIS on testing charges
Cl-6(Classification)	-	100	20% discount to BIS on testing charges
Cl-7(Marking)	-	100	20% discount to BIS on testing charges
Cl-8(Safety Requirements)	-	9700	cl 8 to 32, 20% discount to BIS on testing charges
Cl-9(Endurance fpr motor and base assembly)	-	6000	20% discount to BIS on testing charges
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	400	20% discount to BIS on testing charges
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	200	20% discount to BIS on testing charges
Cl-10.4(Idli Batter)	-	300	20% discount to BIS on testing charges
Cl-10.5(Operational Tests for Juicers)	-	500	20% discount to BIS on testing charges
Cl-11(Temperature Withstand Test for Bowl)	-	300	20% discount to BIS on testing charges
Cl-12.1(Test for Switches)	-	100	20% discount to BIS on testing charges
Cl-13(Strength of Assembly)	-	100	20% discount to BIS on testing charges
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	500	20% discount to BIS on testing charges
Cl-14.2, Table-2 (ii)(Power input and current)	-	1000	20% discount to BIS on testing charges
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	1000	20% discount to BIS on testing charges
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	1000	20% discount to BIS on testing charges
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	1000	20% discount to BIS on testing charges
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	1000	20% discount to BIS on testing charges
Cl-4(General Requirements)	-	100	20% discount to BIS on testing charges
Cl-5(General Conditions for the tests)	-	100	20% discount to BIS on testing charges
Cl-6(Classification)	-	100	20% discount to BIS on testing charges
Cl-7(Marking)	-	100	20% discount to BIS on testing charges
Cl-8(Safety Requirements)	-	9700	Cl 8 to 32, 20% discount to BIS on testing charges
Cl-9(Endurance fpr motor and base assembly)	-	6000	20% discount to BIS on testing charges
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	400	20% discount to BIS on testing charges
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	200	20% discount to BIS on testing charges
Cl-10.4(Idli Batter)	-	300	20% discount to BIS on testing charges
Cl-10.5(Operational Tests for Juicers)	-	500	20% discount to BIS on testing charges
Cl-11(Temperature Withstand Test for Bowl)	-	300	20% discount to BIS on testing charges
Cl-12.1(Test for Switches)	-	100	20% discount to BIS on testing charges
Cl-13(Strength of Assembly)	-	100	20% discount to BIS on testing charges
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	500	20% discount to BIS on testing charges
Cl-14.2, Table-2 (ii)(Power input and current)	-	1000	20% discount to BIS on testing charges
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	1000	20% discount to BIS on testing charges
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	1000	20% discount to BIS on testing charges
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	1000	20% discount to BIS on testing charges
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	1000	20% discount to BIS on testing charges

31 Dec, 2026

-
Included w.e.f 29.10.2025 Exclusion: Cl 19.11.4.1-19.11.4.7 (EMI/EMC), Cl-8 (Safety Requirements)

3779

BIS, Central Laboratory (CL)

None

IS 2692 (1989)

Ferrules for water services ? specification

All

3450/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Nominal Size )	-

-
-

3780

Envirocare Labs Pvt Ltd, Thane

7120616

IS 5405 (2025)

Disposable Sanitary Napkin/Panty Liner/Maternity Pad/Period Panty - Specification ( Third Revision )

Thick napkins and thin napkins

10800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Cover/Top sheet)	-	0	-
3.2(Absorbent core)	-	0	-
3.3(Barrier or bottom sheet)	-	0	-
4.1(Types)	-	100	-
4.2(shapes)	-	100	-
5(Sizes)	-	50	-
Cl. 5 Table-1(Type)	-	0	-
Cl. 5 Table-1(Size class)	-	0	-
Cl. 5 Table-1(Length (Absorbent core only))	-	0	-
Cl. 5 Table-1(Width (Absorbent core only))	-	0	-
6.1(Manufacture, workmanship and finish)	-	0	-
6.2(Manufacture, workmanship and finish)	-	0	-
7.1(pH Test)	-	150	-
7.2("Ability to Withstand Pressure after Absorption: Liquid Absorption ml, Min")	-	500	-
7.3.1(Bacterial and Fungal Bioburden)	-	1000	-
7.3.2(Staphylococcus aureus)	-	400	-
Cl 7.5(Phthalate test- Combination)	-	8500	-
3.1(Cover/Top Sheet (non sterile gauze))	-	0	-
3.1(Cover/Top Sheet (sterile gauze))	-	0	-
5(Size)	-	0	-
Cl 7.5(Phthalate test- Di-iso-butyl phthalate (DIBP))	-	0	-
Cl 7.5(Phthalate Test- Di-n-butyl phthalate (DBP))	-	0	-
Cl 7.5(Phthalate Test- Benzylbutyl Phthalate (BBP))	-	0	-
Cl 7.5(Phthalate Test- Bis-(2-ethylhexyl) phthalate (DEHP))	-	0	-
Cl 7.5(Phthalate Test- Di-n-octyl phthalate (DNOP))	-	0	-
Cl 7.5(Phthalate Test- Di-iso-nonylphthalate (DINP))	-	0	-
Cl 7.5(Phthalate Test- Di-iso-decyl phthalate (DIDP))	-	0	-

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number