BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15393 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

3931

National Test House (NWR) - NTH, Jaipur

8122904

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	500	--
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	500	--
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	500	--
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	500	--
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	500	--
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	500	--
7 Table-3 iii b(Setting Time Final)	-	500	--
7 Table-3 iii a(Setting Time Initial)	-	500	--
7 Table-3 ii b(Expansion after aeration)	-	1000	--
7 Table-3 ii b(Expansion by Autoclave)	-	1000	--
7 Table-3 ii a(Expansion by Le Chatelier)	-	2000	--
7 Table-3 i.(Fineness)	-	1000	--
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	500	--
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	500	--
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	500	--
6.1 Table-2 viii(Alkali content)	-	1000	-
6.1 Table-2 vii(Chloride content)	-	500	-
6.1 Table-2 vi(Loss on ignition)	-	500	-
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	500	-
6.1 Table-2 iv(Magnesia)	-	1000	-
6.1 Table-2 iii.(Insoluble residue)	-	500	-
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	500	-
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	500	-

31 Dec, 2026

-
-

3932

National Test House (NWR) - NTH, Jaipur

8122904

IS 1237 (2012)

Cement Concrete Flooring Tiles - Specification

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7.1(Length, Breadth, Minimum thickness, Difference in length of side between the longest side and shorterst side, Half tiles, Difference in Thickness between the thickest and thinnest tile, Thickness of wearing layer)	-	100	-
Cl 7.1(Length, Breadth, Minimum thickness, Difference in length of side between the longest side and shorterst side, Half tiles, Difference in Thickness between the thickest and thinnest tile, Thickness of wearing layer)	-	0	-
Cl 7.1(Length, Breadth, Minimum thickness, Difference in length of side between the longest side and shorterst side, Half tiles, Difference in Thickness between the thickest and thinnest tile, Thickness of wearing layer)	-	100	-
Cl 7.1(Length, Breadth, Minimum thickness, Difference in length of side between the longest side and shorterst side, Half tiles, Difference in Thickness between the thickest and thinnest tile, Thickness of wearing layer)	-	100	-
Cl 7.1(Length, Breadth, Minimum thickness, Difference in length of side between the longest side and shorterst side, Half tiles, Difference in Thickness between the thickest and thinnest tile, Thickness of wearing layer)	-	100	-
Cl 7.1(Length, Breadth, Minimum thickness, Difference in length of side between the longest side and shorterst side, Half tiles, Difference in Thickness between the thickest and thinnest tile, Thickness of wearing layer)	-	100	-
Cl 11(Suface Finish)	-	100	-
Cl 12.2(Concavity & Convexity )	-	500	-
Cl 12.3(The Maximum gap between the arms of the square and the edge of the title shall notexceed 2 percent of the length.)	-	500	-
Cl 12.4(Shall not exceed 1 percent of the length of the edge.)	-	500	-
Cl 12.5(Water absorption)	-	1000	-
Cl 12.6(Wet transverse strength )	-	2000	-
Cl 12.7(Resistance to wear)	-	2000	-

31 Dec, 2026

-
-

3933

National Test House (NWR) - NTH, Jaipur

8122904

IS 1489 (Part 1) (2015)

Portland pozzolana cement - Specification: Part 1 fly Ash Based

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	2000	--
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1000	--
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1000	--
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1000	--
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	500	--
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	500	--
7 -Table 2- ii- b(Expansion after aeration- 4031 Part 3)	-	1000	--
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	1000	--
7 -Table 2- ii- a(Expansion after aeration - 4031 Part 3)	-	2000	--
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	2000	--
7 -Table 2- i(Fineness 4031 Part 2)	-	1000	--
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	1000	-
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	750	-
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	750	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	750	-
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	1000	-
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	750	-

31 Dec, 2026

-
-

3934

National Test House (NWR) - NTH, Jaipur

8122904

IS 1659 (2004)

Block boards - Specification (Fourth Revision)

BWP-DEC, BWP-COM, MR-DEC, MR-COM

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.3, 6.3.3, IS 303(Visual Inspection - Permissible Defects - IS 303 [test method for COMMERCIAL type])	-	500	-
8.1.3, 6.3.3, IS 1328(Visual Inspection - Permissible Defects - IS 1328 [test method for DECORATIVE type])	-	500	-
7.3(Dimensional Requirements - Length - 8.1.4)	-	100	-
7.3(Dimensional Requirements - Width - 8.1.4)	-	100	-
7.3(Dimensional Requirements - Thickness - Annexure E)	-	100	-
7.3(Dimensional Requirements - Edge Straightness - Annexure D)	-	100	-
7.3(Dimensional Requirements - Squareness - Annexure D)	-	100	-
7.3(Dimensional Requirements - Variation in thickness - Annexure E)	-	0	-
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 90% RH - Annexure F)	-	500	-
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 40% RH - Annexure F)	-	500	-
9.2.1(Dimensional Changes caused by humidity - Change in Thickness - at 90% RH - Annexure F)	-	0	-
9.2.1(Dimensional Changes caused by humidity - Change in thickness - at 40% RH - Annexure F)	-	0	-
9.2.1(Dimensional Changes caused by humidity - Delamination - Annexure F)	-	0	-
9.2.1(Dimensional Changes caused by humidity Change in local planeness - Annexure F)	-	0	-
9.2.2 (Resistance to water - Annexure G, Annexure H [For BWP grade])	-	2000	-
9.2.2 (Resistance to water - Annexure G, Annexure H [For MR Grade])	-	2000	-
9.2.3(Adhesion of Plies - Annexure H)	-	0	-
9.2.4(Mycological Test [for MR grade only] - Annexure J)	-	2000	-
9.2.5(Modulus of rupture - AVERAGE - Annexure K)	-	1000	-
9.2.5(Modulus of rupture - MINIMUM INDIVIDUAL - Annexure K)	-	0	-
9.2.5(Modulus of elasticity - AVERAGE - Annexure K)	-	1000	-
9.2.5(Modulus of elasticity - MINIMUM INDIVIDUAL - Annexure K)	-	0	-
9.2.6(Spot test - Annexure L)	-	2000	-

31 Dec, 2026

-
-

3935

National Test House (NWR) - NTH, Jaipur

8122904

IS 8041 (1990)

Rapid hardening portland cement - Specific4tion (Second Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Fineness 4031 Part 2)	-	1000	--
6.2.1(Expansion by Le Chatelier- 4031 Part 3)	-	1000	--
6.2.1.1(Expansion after aeration - 4031 Part 3)	-	1000	--
6.2.1(Expansion by Autoclave- 4031 Part 3)	-	1000	--
6.2.1.1(Expansion after aeration- 4031 Part 3)	-	1000	--
6.3 a)(Setting Time Initial- 4031 Part 5)	-	500	--
6.3 b)(Setting Time Final- 4031 Part 5)	-	500	--
6.4 a)(Compressive Strength At 24 hrs ± 30 minutes - IS 4031 Part 6)	-	1000	--
6.4 b)(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1000	--
5.1 - Table - 1 iii(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	500	-
5.1 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	1000	-
5.1 - Table - 1 ii(Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985)	-	500	-
5.1 - Table - 1 iv(Magnesia - Cl 4.8 of IS 4032:1985)	-	1000	-
5.1 - Table - 1 v(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	500	-
5.1 - Table - 1 vi(Total loss on ignition - Cl 4.2 of IS 4032:1985)	-	500	-

31 Dec, 2026

-
-

3936

National Test House (NWR) - NTH, Jaipur

8122904

IS 383 (2016)

Coarse and Fine Aggregate for Concrete - Specification (Third Revision)

Coarse/Fine

17250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 5.1(General)	-	15000	-
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (coarse aggregate))	-	0	-
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (fine aggregate))	-	1000	-
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (coarse aggregate ))	-	500	-
5.2- TABLE-2- (iv) IS-2386 (P-2)(Soft fragments (coarse aggregate))	-	500	-
5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (coarse aggregate ))	-	500	-
5.5 Na2so4/5.5.1 Maso4/5.5.1 (Soundness)	-	2000	-
5.5-IS: 2386 (P-5)(Soundness (fine aggregate))	-	2000	-
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (fine aggregate))	-	0	-
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (fine aggregate ))	-	500	-
5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (fine aggregate ))	-	500	-
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Organic impurities (fine aggregate))	-	500	-
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (coarse aggregate))	-	500	-
5.2- TABLE-2- (Note-3) IS-2386 (P-2)(Mica content (fine aggregate))	-	500	-

31 Dec, 2026

-
-

3937

National Test House (NWR) - NTH, Jaipur

8122904

IS 15477 (2019)

Adhesives for use with ceramic tiles and mosaics

Type-I, II, III, IV, V

21000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Classification)	-	1000	-
5.1(Tensile Adhesion Strength )	-	2500	-
5.1(Tensile Adhesion Strength)	-	2500	-
5.2(Shear Adhesion Strength )	-	3000	-
5.2(Shear Adhesion Strength)	-	3000	-
5.2(Shear Adhesion Strength)	-	3000	-
5.3(OpenTime)	-	1000	-
5.4(Adjustment Time)	-	1000	-
5.5(Slip (Required for Vertical Application Only))	-	3000	-
5.6(Deformability (Required for VerticalApplication Only))	-	3000	-

31 Dec, 2026

-
-

3938

National Test House (NWR) - NTH, Jaipur

8122904

IS 2202 : Part 1 (1999)

Wooden flush door shutters (Solid Core Type) - Specification: Part 1 plywood face panels (Sixth Revision)

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.15(Screw Withdrawal Strength - IS 4020 (Pt-16))	-	1000	-
11.15(Screw Withdrawal Resistance test - IS 4020 (Pt-16))	-	0	-
11.14(Glue Adhesion Test - IS 4020(Pt-15))	-	1000	-
11.13(Knife Test - IS 4020(Pt-14))	-	1000	-
11.12(End Immersion Test - IS 4020(Pt-13))	-	1000	-
11.11(Maximum departure from the general planeness - IS 4020(Pt-12))	-	1000	-
11.11(The recovery of the original size after subjecting the door to high and low humidity- IS 4020(Pt-12))	-	3000	-
11.1(Misuse Test - IS 4020(Pt-11))	-	1000	-
11.9(Slamming Test - IS 4020(Pt-10))	-	1000	-
11.8(Residual deformation after 15 minutes of unloading - IS 4020(Pt-9))	-	1500	-
11.8(Initial deflection - IS 4020(Pt-9))	-	0	-
11.8(Buckling Test - IS 4020(Pt-9))	-	0	-
11.7(Shock Resistance Test -IS 4020(Pt-8))	-	1500	-
11.7(Shock Resistance Test -IS 4020(Pt-8))	-	0	-
11.6(Residual lateral buckling - IS 4020(Pt-7))	-	1500	-
11.6(Lateral buckling during loading - IS 4020(Pt-7))	-	0	-
11.6(Residual deflection after removal of load - IS 4020(Pt-7))	-	0	-
11.6(Deflection of the edge at maximum load - IS 4020(Pt-7))	-	1500	-
11.5(Residual deflection - IS 4020(Pt-6))	-	0	-
11.5(Deflection at maximum load - IS 4020(Pt-6))	-	0	-
11.4(Depth of indentation - IS 4020(Pt-5))	-	1000	-
11.3(Depth of deviation - IS 4020(Pt-4))	-	0	-
11.2( Twist, cupping & wrapping - IS 4020 (Pt-3))	-	1000	-
11.1( Squareness Test - IS 4020 (Pt-2))	-	1000	-
11.1(Variation in thickness - IS 4020 (Pt-2))	-	0	-
11.1(Thickness - IS 4020 (Pt-2))	-	1000	-
11.1(Width- IS 4020 (Pt-2))	-	1000	-
11.1(Height - IS 4020 (Pt-2))	-	1000	-
9.3(Workmanship & finish - IS 2202(Pt-1))	-	1000	-
9.2(Workmanship & finish - IS 2202(Pt-1))	-	0	-
6.2(Plywood)	-	0	-

31 Dec, 2026

-
-

3939

National Test House (NWR) - NTH, Jaipur

8122904

IS 456 (2000)

Plain and reinforced concrete - Code of practice (Fourth Revision)

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4-Table-1 (v)-IS: 3025(P-17)(Suspended matter)	-	1000	-
5.4-Table-1 (iv)-IS: 3025(P-32)(Chloride)	-	1000	-
5.4-Table-1 (ii)-IS: 3025(P-24)(Sulphate)	-	1000	-
5.4-Table-1 (i)-IS: 3025(P-18)(In-Organic)	-	1000	-
5.4-Table-1 (i)-IS: 3025(P-18)(Organic )	-	1000	-
5.4.2-IS: 3025(P-11)(Ph)	-	1000	-
Cl 5.4 (b)(Alkalinity)	-	1000	-
Cl 5.4 (a)(Acidity)	-	1000	-

31 Dec, 2026

-
-

3940

National Test House (NWR) - NTH, Jaipur

8122904

IS 1489 : Part 2 (2015)

Portland - Pozzolana cement - Specification: Part 2 calcined clay based

Calcined clay based

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 -Table 2- i(Fineness 4031 Part 2)	-	1000	-
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	500	-
7 -Table 2- ii- a(Expansion after aeration - 4031 Part 3)	-	0	-
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	500	-
7 -Table 2- ii- b(Expansion after aeration- 4031 Part 3)	-	0	-
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	500	-
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	500	-
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1000	-
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1000	-
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1000	-
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	1000	-
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	500	-
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	1000	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	500	-
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	1000	-
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	1000	-
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	2000	-

31 Dec, 2026

-
-

3941

National Test House (NWR) - NTH, Jaipur

8122904

IS 12406 (2003)

Medium density fibre boards for general purpose - Specification (First Revision)

Flat pressed single layer Type, Gr 1 & Gr2

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7(Finish)	-	500	-
Cl 8(Dimensions & Tolerances)	-	500	-
Cl 8(Dimensions & Tolerances)	-	0	-
Cl 8(Dimensions & Tolerances)	-	0	-
Cl 11.4(Test For Density)	-	1000	-
Cl 11.4(Test For Density)	-	0	-
Cl 11.5(Test For Moisture Content)	-	1000	-
Cl 11.5(Test For Moisture Content)	-	0	-
Cl 11.7.1(Due To General Absorption)	-	1000	-
Cl 11.9(Test For Internal Bond)	-	2000	-
Cl 11.9(Test For Internal Bond)	-	2000	-
Cl 11.8(Tesr For Modulus Of Elasticity & Mudulus Of Rupture)	-	2000	-
Cl 11.8(Tesr For Modulus Of Elasticity & Mudulus Of Rupture)	-	2000	-
Cl 11.8(Tesr For Modulus Of Elasticity & Mudulus Of Rupture)	-	0	-
Cl 11.10(Test For Screw Withdrawal Strength)	-	1000	-
Cl 11.10(Test For Screw Withdrawal Strength)	-	0	-

31 Dec, 2026

-
-

3942

National Test House (NWR) - NTH, Jaipur

8122904

IS 8042 (2015)

White portland cement - Specification (Third Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 -Table 2- i(Fineness 4031 Part 2)	-	1000	--
6 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	1000	--
6 -Table 2- ii- a(Expansion after aeration - 4031 Part 3)	-	1000	--
6 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	1000	--
6-Table 2- ii- b(Expansion after aeration- 4031 Part 3)	-	1000	--
6 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	500	--
6 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	500	--
6 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1000	--
6 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1000	--
6 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1000	--
6 -Table 2- vi(Degree of whiteness-Annex B)	-	3000	--
5 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	500	-
5 - Table - 1 ii(Iron oxide - Cl 4.5 of IS 4032:1985)	-	500	-
5 - Table - 1 iii(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	500	-
5 - Table - 1 iv(Magnesia - Cl 4.8 of IS 4032:1985)	-	1000	-
5 - Table - 1 v(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	500	-
5 - Table - 1 vi(Loss on ignition - Cl 4.2 of IS 4032:1985)	-	500	-
5 - Table - 1 vii(Chloride content - Cl 4.13 of IS 4032:1985)	-	500	-

31 Dec, 2026

-
-

3943

National Test House (NWR) - NTH, Jaipur

8122904

IS 4990 (2011)

Plywood for concrete shuttering works - Specification (Third Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.2(DIMENSIONS & TOLERANCES )	-	1000	--
7.2(DIMENSIONS & TOLERANCES )	-	1000	--
7.3(DIMENSIONS & TOLERANCES )	-	1000	--
7.4(DIMENSIONS & TOLERANCES )	-	1000	--
7.4(DIMENSIONS & TOLERANCES )	-	1000	--
8.1(WORKMANSHIP AND FINISH )	-	1000	--
8.3(WORKMANSHIP AND FINISH )	-	1000	--
10.1.1(MOISTURE CONTENT)	-	2000	--
10.1.2, 10.1.2.1 (Table-1)(GLUE ADHESION IN DRY STATE)	-	2000	--
10.1.2, 10.1.2.2(GLUE ADHESION IN DRY STATE)	-	2000	---
10.1.3, 10.1.3.1.1 (Table-1)(RESISTANCE TO WATER TEST)	-	2000	--
10.1.3, 10.1.3.1.2(RESISTANCE TO WATER TEST)	-	2000	--
10.1.4(RESISTANCE TO WATER TEST)	-	2000	---
10.1.5(MYCOLOGICAL TEST )	-	2000	--
10.1.5, 10.1.5.1 (Table-1)(MYCOLOGICAL TEST )	-	2000	--
10.1.5.2(MYCOLOGICAL TEST )	-	2000	--
Cl. 10.1.6(Cl. 10.1.6 (Tensile Strength: Sum of the Tensile Strength in two directions))	-	3000	---
Cl. 10.1.6 (Cl. 10.1.6 (Tensile Strength: Perpendicular to grain))	-	3000	--
Cl. 10.1.6(Cl. 10.1.6 (Tensile Strength: Parallel to grain))	-	3000	--
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Rupture: Across the Face Grain: Minimum Individual))	-	3000	--
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Rupture: Across the Face Grain: Average))	-	3000	--
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Rupture: Along the Face Grain: Minimum Individual))	-	3000	--
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Rupture: Along the Face Grain: Average))	-	3000	--
Cl. 10.1.7 (Table 2)(Cl. 10.1.7 (Table 2) (Modulus of Elasticity: Across the Face Grain: Minimum Individual))	-	3000	--
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Elasticity: Across the Face Grain: Average))	-	3000	--
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Elasticity: Along the Face Grain: Minimum Individual))	-	3000	--
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Elasticity: Along the Face Grain: Average))	-	3000	--
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Rupture: Across the Face Grain: Minimum Individual))	-	3000	--
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Rupture: Across the Face Grain: Average))	-	3000	--
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Rupture: Along the Face Grain: Minimum Individual))	-	3000	--
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Rupture: Along the Face Grain: Average))	-	3000	--
Cl. 10.1.8 (Table 3)(Cl. 10.1.8 (Table 3) (Modulus of Elasticity: Across the Face Grain: Minimum Individual))	-	3000	--
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Elasticity: Across the Face Grain: Average))	-	3000	--
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Elasticity: Along the Face Grain: Minimum Individual))	-	3000	--
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Elasticity: Along the Face Grain: Average))	-	3000	--
10.1.9(RETENTION OF PRESERVATIVE)	-	5000	--

31 Dec, 2026

-
-

3944

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 1364 : Part 3 (2018)

Hexagon Head Bolts, Screws and Nuts of Product Grades A and B Part 2 Hexagon Head Screws ( Size Range M 1.6 to M 64 ) ( Fifth Revision )

Hexagon Nuts, Style 1 (Size Range M 1.6 To M 64)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 3(Dimension)	-	6000	-
Cl. 4 and Table 3(Threads and tolerances)	-	9000	-
Cl. 4 and Table 3(Mechanical Properties)	-	4500	-
Cl. 4 and Table 3(Finish – Coating)	-	3500	-
Cl. 4 and Table 3(Surface integrity)	-	2500	-
Cl. 3(Dimension)	-	0	-
Cl. 4 and Table 3(Threads and tolerances)	-	0	-
Cl. 4 and Table 3(Mechanical Properties)	-	0	-
Cl. 4 and Table 3(Finish – Coating)	-	0	-
Cl. 4 and Table 3(Surface integrity)	-	0	-
Cl. 3(Dimension)	-	0	-
Cl. 4 and Table 3(Threads and tolerances)	-	0	-
Cl. 4 and Table 3(Mechanical Properties)	-	0	-
Cl. 4 and Table 3(Finish – Coating)	-	0	-
Cl. 4 and Table 3(Surface integrity)	-	0	-

-
Included w.e.f. 01.09.2025

3945

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 1364 : Part 2 (2023)

Hexagon head bolts screws and nuts of product grades A and B Part 2 Hexagon head screws (Size range M1.6 to M64 ) (Sixth revision of IS 1364 (Part 2))

All Grade / Type / Size / Designation

19000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(Dimensions)	-	2500	-
Cl-5, Table-5(General requirements)	-	2500	-
Cl-5, Table-5(Thread-Tolerance class)	-	1000	-
Cl-5, Table-5(Mechanical properties-Steel)	-	3500	-
Cl-5, Table-5(Mechanical properties-Stainless steel)	-	3500	-
Cl-5, Table-5(Tolerances- Product grade)	-	2000	-
Cl-5, Table-5(Surface condition -Electroplated coatings)	-	2500	-
Cl-5, Table-5(Surface condition- Non-electrolytically applied zinc flake)	-	2500	-
Cl-5, Table-5(Surface condition - Hot dip galvanized coatings)	-	2500	-
Cl-5, Table-5("Surface integrity -Limits for surface discontinuities")	-	2500	-
Cl-6(Marking)	-	500	-

-
Included w.e.f. 31.07.2025

3946

Central institute of Petrochemicals Engineering & Technology (CIPET), Raipur

5163604

IS 12786 (2024)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification (first revision)

12 MM TO 32 MM

13700.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Material)	-	6900.00	BIS test charge 13700/- and Other test charge 17725/- GST Extra Material test charge BIS 5331/- and Other test charge 6900/ - GST extra .
Cl-4.2(Carbon content of finished PE lateral pipe)	-	925.00	GST extra
Cl-5.1(Dimensions of pipes and wall thicknesses)	-	500.00	GST extra
Cl-6.0(Visual Appearance)	-	500.00	GST extra
Cl-7.1(Hydraulic Characteristics- Internal pressure creep rupture test)	-	1000.00	GST extra
Cl-7.1(Hydraulic Characteristics- quality acceptance test)	-	3000.00	GST extra
Cl-7.2(Reversion Test)	-	1200.00	specimen charge 500/- GST Extra
Cl-7.3(Tensile Test)	-	1800.00	GST Extra
Cl-7.3.1(Test Piece)	-	500.00	specimen charge GST Extra
Cl-7.3.2(Procedure)	-	0.00	GST Extra
Cl-7.4(Susceptibility to Environmental Stress Cracking)	-	1200.00	GST Extra
Cl-8.0(Supply of pipes)	-	0.00	-
Cl-9.0(Coiling)	-	0.00	-
Cl-10.0(Sampling and criteria for conformity)	-	0.00	-
Cl-11(Marking)	-	0.00	-
3(Class of Pipe)	-	0.00	-
5.1 & Table 1(Dimensions of Pipes - Outside diameters)	-	0.00	already added clause no.5.0
5.1 & Table 1(Dimensions of Pipes - Wall thickness)	-	0.00	already added clause no.5.0
6(Visual Appearance)	-	0.00	-
7.1 & Table 2(Hydraulic Characteristics)	-	0.00	-
7.1 & Table 2(Hydraulic Characteristics)	-	0.00	-
7.2(Reversion Test)	-	0.00	-
7.3(Tensile Strength)	-	0.00	-
7.3(Elongation at Break)	-	0.00	-
7.4(SusceptibiIity to Environmental Stress Cracking)	-	0.00	-
4.2(a)(Carbon Black Content-IS 2530)	-	0.00	-
4.2(b)(Carbon Black Dispersion-IS 2530)	-	700.00	GST EXTRA

25 Apr, 2028

-
Included w.e.f.22.07.2025

3947

AADIDEV TEST & RESEARCH CENTRE LLP

8194926

IS 7098 : Part 1 (1988)

Specification for crosslinked polyethylene insulated pvc sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision)

1100 Volts Grade

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(CONDUCTOR: MATERIALS)	-	0	-
4(INSULATION : MATERIALS)	-	0	-
5.1(FILLER AND INNER SHEATH)	-	0	-
5.2(FILLER AND INNER SHEATH)	-	0	-
6(ARMOURING)	-	0	-
7(OUTER SHEATH)	-	0	-
8.1(CONDUCTOR: CONSTRUCTION)	-	0	-
8.2(PROTECTIVE BARRIER)	-	0	-
8.3(SIZE OF NEUTRAL CONDUCTOR)	-	0	-
9.1(Insulation Applied by extrusicn)	-	0	-
9.2(Thickness of Insulation - Average)	-	200	-
9.3(Thickness of Insulation - Minimum)	-	200	-
9.4(Application of Insulation)	-	0	-
10.1(Core Identification)	-	0	-
10.2(Core Identification- Neutral)	-	0	-
10.3(Core Identification by number )	-	0	-
10.4(Core Identification by number - Neutral )	-	0	-
11(LAVING UP OF CORES)	-	0	-
12.1 & 12.2(Inner sheath : Application)	-	0	-
12.3(Thickness of Inner Sheath)	-	200	-
13.1(Armouring: Application)	-	0	-
13.1.2(Armouring: Coverage )	-	250	-
13.1.3(Armouring: Direction of Lay )	-	200	-
13.2(Type of armour )	-	0	-
13.3(Armouring : Dimensions -Wire Diameter)	-	250	-
13.3(Armouring : Dimensions -Formed wire )	-	250	-
13.4(Armour: Joint)	-	0	-
13.5(Armouring : Resistance Test)	-	500	-
13.6 a)(ARMOURING: Tensile Strength)	-	1000	-
13.6 b)(ARMOURING: Elongation )	-	1000	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	1000	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	500	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	1000	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	1000	-
13.6 g)(ARMOURING: Resistivity)	-	500	-
14.1(Outer Sheath : Application)	-	0	-
14.2(Colour of outer sheath)	-	0	-
14.3(Thickness of outer sheath - AVERAGE)	-	200	-
14.3(Thickness of outer sheath - minimum)	-	200	-
15.1 a) i)(Annealing Test ( For copper wire ) )	-	500	-
15.1 a) ii)(Tensile test (for aluminium) - Before stranding )	-	500	-
15.1 a) ii)(Tensile test (for aluminium) - After stranding )	-	500	-
15.1 a) iii)(Wrapping test (for aluminium))	-	200	-
15.1 a) iv)(Resistance test - Main conductor)	-	1000	-
15.1 a) iv)(Resistance test - Neutral conductor)	-	500	-
15.1 d) i) (Phyaical tests for insulation : Tensile Test)	-	1000	-
15.1 d) i) (Phyaical tests for insulation : Elongation)	-	500	-
15.1 d) ii) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	1000	-
15.1 d) ii) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	1000	-
15.1 d) iii) (Phyaical tests for insulation : Hot set )	-	1000	-
15.1 d) iii) (Phyaical tests for insulation : Permanent set )	-	500	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage )	-	1000	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage - Crack observed )	-	1000	-
15.1 d) v) (Insulation: Waterabsorption(gravimetric))	-	5000	-
15.1 e) i) (Physical tests for outer sheath : Tensile stregth)	-	1000	-
15.1 e) i) (Physical tests for outer sheath : Elongation)	-	1000	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	1000	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation )	-	1000	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	500	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	500	-
15.1 e) iii) (Sheath: Loss of mass in air oven)	-	3500	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage )	-	1000	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage - Crack observed )	-	200	-
15.1 e) v) (Sheath : Hot deformation)	-	1000	-
15.1 e) vi) (Sheath : Heat shock test)	-	1000	-
15.1 e) vii) (Sheath : Thermalstability)	-	1000	-
15.1 f)(INSULATION RESISTANCE TEST : Volume resistivity )	-	1000	-
16.2(HIGH VOLTAGE TEST )	-	500	-
16.3(FLAMMABILITY TEST : Period of Burning )	-	500	-
16.3(FLAMMABILITY TEST : Unaffected length )	-	500	-
16.9(Oxygen Index Test)	-	2500	-
16.1(Flame Retardance Test on Single Cables)	-	500	-
16.11(Flame Retardance Test on Bunched Cables)	-	4000	-
16.13(Test for Halogen Acid Gas Evolution)	-	3500	-
16.14(Temperature Index)	-	2500	-
17.1(Manufacturer'. identification)	-	0	-
17.2(cable Indentification )	-	0	-
17.3(cable Code )	-	0	-
15.4 (a)(Cold bend)	-	1000	-
15.4 (b)(Cold impact)	-	1000	-
Table 1(Ageing in air oven - Elongation on Insulation)	-	1000	-
Table 1(Ageing in air oven - Tensile strength on Insulation)	-	1000	-
Table 1(Ageing in air oven - Elongation on Insulation)	-	1000	-
Table 1(Ageing in air oven - Tensile strength on Insulation)	-	1000	-
Cl No. 16.15(Smoke density test)	-	3000	-
Table 2(Cold Impact test for Outer sheath)	-	500	-
Table 2(Cold bend test for Outer sheath)	-	500	-
Cl 16(Halogen Acid Gas Test)	-	3500	-
Cl 16(Halogen Acid Gas Test)	-	0	-
Cl 16(Halogen Acid Gas Test)	-	0	-
Cl.8(Conductor)	-	0	-
Cl.8(Conductor)	-	0	-
Cl.8(Conductor)	-	0	-
Cl.15.4(Cold Bend Test (for outer sheath))	-	500	-
Cl.15.4(Cold Impact Test (For outer sheath))	-	500	-
Cl.13.5.1 and Table 7(Resistance Test for Armouring (other than mining Cables))	-	500	-

29 Dec, 2028

-
Table 4 (Copper purity test)

3948

ALAIPURIA TEST HOUSE PRIVATE LIMITED, GHAZIABAD

8180426

IS 302 : Part 2 : Sec 202 (1992)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 202 electric stoves

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	200	-
6(Classification- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.3(Marking- IS 302-1)	-	0	-
7.4(Marking- IS 302-1)	-	0	-
7.6(Marking- IS 302-1)	-	0	-
7.11(Marking- IS 302-1)	-	0	-
7.12(Marking- IS 302-1)	-	0	-
7.13(Marking- IS 302-1)	-	0	-
7.14(Marking- IS 302-1)	-	0	-
7.15(Marking- IS 302-1)	-	0	-
7.101(Marking)	-	0	-
8( Protection Against Electric Shock, IS 302-1)	-	500	-
10(Power Input and Current, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
12(Operation under overload conditions of appliances with heating elements, IS 302-2-202: 1992)	-	500	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	500	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	0	-
15.1(Moisture Resistance, IS 302-1)	-	1000	-
15.3(Moisture Resistance, IS 302-1)	-	500	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	500	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	0	-
19.2(Abnormal Operation, IS 302-1)	-	1000	-
19.2(Abnormal Operation, IS 302-1)	-	500	-
19.3(Abnormal Operation, IS 302-1)	-	1000	-
19.3(Abnormal Operation, IS 302-1)	-	0	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	500	-
21.1(Mechanical Strength, IS 302-1 & IS 302-2-202)	-	500	-
22(Construction, IS 302-1)	-	1000	-
22.101(Construction)	-	0	-
22.102(Construction)	-	0	-
22.103(Construction)	-	0	-
22.104(Construction)	-	0	-
22.105(Construction)	-	0	-
22.105.1(Construction)	-	0	-
22.105.2(Construction)	-	0	-
22.106(Construction)	-	0	-
22.107(Construction)	-	0	-
11.107.1(Construction)	-	0	-
23.1(Internal Wiring, IS 302-1)	-	500	-
23.2(Internal Wiring, IS 302-1)	-	0	-
23.8(Internal Wiring, IS 302-1)	-	500	-
23.9(Internal Wiring, IS 302-1)	-	0	-
23.10(Internal Wiring, IS 302-1)	-	0	-
24.1(Components, IS 302-1)	-	500	-
24.2(Components, IS 302-1)	-	0	-
24.101(Components)	-	0	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.4(Supply Connection and External Flexible Cords)	-	0	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
26(Terminals for External Conductors, IS 302-1)	-	500	-
27.1(Provision for Earthing, IS 302-1)	-	500	-
27.2(Provision for Earthing, IS 302-1)	-	0	-
27.3(Provision for Earthing, IS 302-1)	-	0	-
27.4(Provision for Earthing, IS 302-1)	-	0	-
27.5(Provision for Earthing, IS 302-1)	-	0	-
28(Screws & Connections, IS 302-1)	-	500	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	500	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	0	0
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	500	-
30.2(Resistance to Heat, Fire & Tracking, IS 302-1)	-	500	-
31(Resistance of Rusting, IS 302-1)	-	500	-

03 Oct, 2027

-
Included w.e.f 04.08.2025 Exclusion: Cl 19.11.4.1-19.11.4.7(EMI/EMC)

3949

GLOBAL COMPLIANCE LABORATORY INDIA, GHAZIABAD

5172706

IS 302 : Part 2 : Sec 15 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 15 appliances for heating liquids (First Revision)

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	3000	-
7(Marking and instructions)	-	3000	-
8(Protection against live parts)	-	3000	-
10(POWER INPUT AND CURRENT)	-	3000	-
11(HEATING)	-	3000	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	3000	-
14(TRANSIENT OVERVOLTAGES)	-	3000	-
21(MECHANICAL STRENGTH)	-	3000	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	3000	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	3000	-
19(ABNORMAL OPERATION)	-	3000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	3000	-
22(CONSTRUCTION)	-	3000	-
23(INTERNAL WIRING)	-	3000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	3000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	3000	-
27(PROVISION FOR EARTHING)	-	3000	-
28(SCREWS AND CONNECTIONS)	-	3000	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	3000	-
30(RESISTANCE TO HEAT AND FIRE)	-	3000	-
31(RESISTANCE TO RUSTING)	-	3000	-
22.16(Automatic cord reel)	-	3000	-
22.32(Oxygen bomb for rubber material)	-	3000	-
22.47(Water pressure inlet)	-	3000	-
22.3(Flexing test)	-	3000	-
4(General requirements)	-	3000	-
5(General Conditions of tests)	-	3000	-
6(Classification- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.3(Marking- IS 302-1)	-	3000	-
7.4(Marking- IS 302-1)	-	3000	-
7.5(Marking- IS 302-1)	-	3000	-
7.6(Marking- IS 302-1)	-	3000	-
7.7(Marking- IS 302-1)	-	3000	-
7.8(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-2-15)	-	3000	-
6(Classification- IS 302-1)	-	3000	-
6(Classification- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
Marking- IS 302-1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-2-15)	-	3000	-
7.3(Marking- IS 302-1)	-	3000	-
7.4(Marking- IS 302-1)	-	3000	-
7.6(Marking- IS 302-1)	-	3000	-
7.7(Marking- IS 302-1)	-	3000	-
7.8(Marking- IS 302-1)	-	3000	-
7.9(Marking- IS 302-1)	-	3000	-
7.12(Marking- IS 302-2-15)	-	3000	-
7.12(Marking- IS 302-1)	-	3000	-
7.12.1(Marking- IS 302-1)	-	3000	-
7.12.3(Marking- IS 302-1)	-	3000	-
7.12.5(Marking- IS 302-1)	-	3000	-
7.12.6(Marking- IS 302-1)	-	3000	-
7.13(Marking- IS 302-1)	-	3000	-
7.14(Marking- IS 302-1)	-	3000	-
7.15(Marking- IS 302-1)	-	3000	-
7.101(Marking- IS 302-2-15)	-	3000	-
8(Protection Against Electric Shock, IS 302-1)	-	3000	-
10(Power Input and Current, IS 302-1)	-	3000	-
11(Heating, IS 302-1)	-	3000	-
11(Heating, IS 302-1)	-	3000	-
11(Heating, IS 302-1)	-	3000	-
11(Heating, IS 302-1)	-	3000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	3000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	3000	-
15.1(Moisture Resistance, IS 302-1)	-	3000	-
15.2(Spillage test as 15.2, IS 3.02-1 & 302-2-15)	-	3000	-
16(Leakage current as per Cl 16, IS 302-1)	-	3000	-
16(electric strength as per Cl 16, IS 302-1)	-	3000	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	3000	-
19.13(Abnormal Operation as per Cl 19, IS 302-2-15)	-	3000	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	3000	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	3000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	3000	-
21.1(Mechanical Strength, IS 302-1)	-	3000	-
21.2(Mechanical Strength, IS 302-1)	-	3000	-
22.1(Construction, IS 302-1)	-	3000	-
22.7(Construction as per Cl 22.7, IS 3.02-2-15)	-	3000	-
22.107(Construction as per Cl 22.7, IS 3.02-2-15)	-	3000	-
22.108(Construction as per Cl 22.8, IS 3.02-2-15)	-	3000	-
23.1(Internal Wiring, IS 302-1)	-	3000	-
23.2(Internal Wiring, IS 302-1)	-	3000	-
23.4(Internal Wiring, IS 302-1)	-	3000	-
23.5(Internal Wiring, IS 302-1)	-	3000	-
23.6(Internal Wiring, IS 302-1)	-	3000	-
23.7(Internal Wiring, IS 302-1)	-	3000	-
23.8(Internal Wiring, IS 302-1)	-	3000	-
23.9(Internal Wiring, IS 302-1)	-	3000	-
23.1O(Internal Wiring, IS 302-1)	-	3000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.9(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
26(Terminals for External Conductors, IS 302-1)	-	3000	-
27.1(Provision for Earthing, IS 302-1)	-	3000	-
27.2(Provision for Earthing, IS 302-1)	-	3000	-
27.3(Provision for Earthing, IS 302-1)	-	3000	-
27.4(Provision for Earthing, IS 302-1)	-	3000	-
27.5(Provision for Earthing, IS 302-1)	-	3000	-
28(Screws & Connections, IS 302-1)	-	3000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	3000	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	3000	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	3000	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	3000	-
31(Resistance of Rusting, IS 302-1)	-	3000	-
6(Classification- IS 302-1)	-	3000	-
7.5(Marking- IS 302-1)	-	3000	-
7.1O(Marking- IS 302-1)	-	3000	-
7.11(Marking- IS 302-1)	-	3000	-
15(MOISTURE RESISTANCE)	-	3000	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	3000	-
6.0(Classification)	-	3000	-
7(Marking and instructions)	-	3000	-
8(Protection against live parts)	-	3000	-
10(POWER INPUT AND CURRENT)	-	3000	-
11(HEATING)	-	3000	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	3000	-
14(TRANSIENT OVERVOLTAGES)	-	3000	-
21(MECHANICAL STRENGTH)	-	3000	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	3000	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	3000	-
19(ABNORMAL OPERATION)	-	3000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	3000	-
22(CONSTRUCTION)	-	3000	-
23(INTERNAL WIRING)	-	3000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	3000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	3000	-
27(PROVISION FOR EARTHING)	-	3000	-
28(SCREWS AND CONNECTIONS)	-	3000	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	3000	-
30(RESISTANCE TO HEAT AND FIRE)	-	3000	-
31(RESISTANCE TO RUSTING)	-	3000	-
22.16(Automatic cord reel)	-	3000	-
22.32(Oxygen bomb for rubber material)	-	3000	-
22.47(Water pressure inlet)	-	3000	-
22.3(Flexing test)	-	3000	-
4(General requirements)	-	3000	-
5(General Conditions of tests)	-	3000	-
6(Classification- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.3(Marking- IS 302-1)	-	3000	-
7.4(Marking- IS 302-1)	-	3000	-
7.5(Marking- IS 302-1)	-	3000	-
7.6(Marking- IS 302-1)	-	3000	-
7.7(Marking- IS 302-1)	-	3000	-
7.8(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-2-15)	-	3000	-
6(Classification- IS 302-1)	-	3000	-
6(Classification- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
Marking- IS 302-1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-2-15)	-	3000	-
7.3(Marking- IS 302-1)	-	3000	-
7.4(Marking- IS 302-1)	-	3000	-
7.6(Marking- IS 302-1)	-	3000	-
7.7(Marking- IS 302-1)	-	3000	-
7.8(Marking- IS 302-1)	-	3000	-
7.9(Marking- IS 302-1)	-	3000	-
7.12(Marking- IS 302-2-15)	-	3000	-
7.12(Marking- IS 302-1)	-	3000	-
7.12.1(Marking- IS 302-1)	-	3000	-
7.12.3(Marking- IS 302-1)	-	3000	-
7.12.5(Marking- IS 302-1)	-	3000	-
7.12.6(Marking- IS 302-1)	-	3000	-
7.13(Marking- IS 302-1)	-	3000	-
7.14(Marking- IS 302-1)	-	3000	-
7.15(Marking- IS 302-1)	-	3000	-
7.101(Marking- IS 302-2-15)	-	3000	-
8(Protection Against Electric Shock, IS 302-1)	-	3000	-
10(Power Input and Current, IS 302-1)	-	3000	-
11(Heating, IS 302-1)	-	3000	-
11(Heating, IS 302-1)	-	3000	-
11(Heating, IS 302-1)	-	3000	-
11(Heating, IS 302-1)	-	3000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	3000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	3000	-
15.1(Moisture Resistance, IS 302-1)	-	3000	-
15.2(Spillage test as 15.2, IS 3.02-1 & 302-2-15)	-	3000	-
16(Leakage current as per Cl 16, IS 302-1)	-	3000	-
16(electric strength as per Cl 16, IS 302-1)	-	3000	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	3000	-
19.13(Abnormal Operation as per Cl 19, IS 302-2-15)	-	3000	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	3000	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	3000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	3000	-
21.1(Mechanical Strength, IS 302-1)	-	3000	-
21.2(Mechanical Strength, IS 302-1)	-	3000	-
22.1(Construction, IS 302-1)	-	3000	-
22.7(Construction as per Cl 22.7, IS 3.02-2-15)	-	3000	-
22.107(Construction as per Cl 22.7, IS 3.02-2-15)	-	3000	-
22.108(Construction as per Cl 22.8, IS 3.02-2-15)	-	3000	-
23.1(Internal Wiring, IS 302-1)	-	3000	-
23.2(Internal Wiring, IS 302-1)	-	3000	-
23.4(Internal Wiring, IS 302-1)	-	3000	-
23.5(Internal Wiring, IS 302-1)	-	3000	-
23.6(Internal Wiring, IS 302-1)	-	3000	-
23.7(Internal Wiring, IS 302-1)	-	3000	-
23.8(Internal Wiring, IS 302-1)	-	3000	-
23.9(Internal Wiring, IS 302-1)	-	3000	-
23.1O(Internal Wiring, IS 302-1)	-	3000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.9(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
26(Terminals for External Conductors, IS 302-1)	-	3000	-
27.1(Provision for Earthing, IS 302-1)	-	3000	-
27.2(Provision for Earthing, IS 302-1)	-	3000	-
27.3(Provision for Earthing, IS 302-1)	-	3000	-
27.4(Provision for Earthing, IS 302-1)	-	3000	-
27.5(Provision for Earthing, IS 302-1)	-	3000	-
28(Screws & Connections, IS 302-1)	-	3000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	3000	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	3000	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	3000	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	3000	-
31(Resistance of Rusting, IS 302-1)	-	3000	-
6(Classification- IS 302-1)	-	3000	-
7.5(Marking- IS 302-1)	-	3000	-
7.1O(Marking- IS 302-1)	-	3000	-
7.11(Marking- IS 302-1)	-	3000	-
15(MOISTURE RESISTANCE)	-	3000	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	3000	-
6.0(Classification)	-	3000	-
7(Marking and instructions)	-	3000	-
8(Protection against live parts)	-	3000	-
10(POWER INPUT AND CURRENT)	-	3000	-
11(HEATING)	-	3000	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	3000	-
14(TRANSIENT OVERVOLTAGES)	-	3000	-
21(MECHANICAL STRENGTH)	-	3000	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	3000	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	3000	-
19(ABNORMAL OPERATION)	-	3000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	3000	-
22(CONSTRUCTION)	-	3000	-
23(INTERNAL WIRING)	-	3000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	3000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	3000	-
27(PROVISION FOR EARTHING)	-	3000	-
28(SCREWS AND CONNECTIONS)	-	3000	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	3000	-
30(RESISTANCE TO HEAT AND FIRE)	-	3000	-
31(RESISTANCE TO RUSTING)	-	3000	-
22.16(Automatic cord reel)	-	3000	-
22.32(Oxygen bomb for rubber material)	-	3000	-
22.47(Water pressure inlet)	-	3000	-
22.3(Flexing test)	-	3000	-
4(General requirements)	-	3000	-
5(General Conditions of tests)	-	3000	-
6(Classification- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.3(Marking- IS 302-1)	-	3000	-
7.4(Marking- IS 302-1)	-	3000	-
7.5(Marking- IS 302-1)	-	3000	-
7.6(Marking- IS 302-1)	-	3000	-
7.7(Marking- IS 302-1)	-	3000	-
7.8(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-2-15)	-	3000	-
6(Classification- IS 302-1)	-	3000	-
6(Classification- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
Marking- IS 302-1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-2-15)	-	3000	-
7.3(Marking- IS 302-1)	-	3000	-
7.4(Marking- IS 302-1)	-	3000	-
7.6(Marking- IS 302-1)	-	3000	-
7.7(Marking- IS 302-1)	-	3000	-
7.8(Marking- IS 302-1)	-	3000	-
7.9(Marking- IS 302-1)	-	3000	-
7.12(Marking- IS 302-2-15)	-	3000	-
7.12(Marking- IS 302-1)	-	3000	-
7.12.1(Marking- IS 302-1)	-	3000	-
7.12.3(Marking- IS 302-1)	-	3000	-
7.12.5(Marking- IS 302-1)	-	3000	-
7.12.6(Marking- IS 302-1)	-	3000	-
7.13(Marking- IS 302-1)	-	3000	-
7.14(Marking- IS 302-1)	-	3000	-
7.15(Marking- IS 302-1)	-	3000	-
7.101(Marking- IS 302-2-15)	-	3000	-
8(Protection Against Electric Shock, IS 302-1)	-	3000	-
10(Power Input and Current, IS 302-1)	-	3000	-
11(Heating, IS 302-1)	-	3000	-
11(Heating, IS 302-1)	-	3000	-
11(Heating, IS 302-1)	-	3000	-
11(Heating, IS 302-1)	-	3000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	3000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	3000	-
15.1(Moisture Resistance, IS 302-1)	-	3000	-
15.2(Spillage test as 15.2, IS 3.02-1 & 302-2-15)	-	3000	-
16(Leakage current as per Cl 16, IS 302-1)	-	3000	-
16(electric strength as per Cl 16, IS 302-1)	-	3000	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	3000	-
19.13(Abnormal Operation as per Cl 19, IS 302-2-15)	-	3000	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	3000	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	3000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	3000	-
21.1(Mechanical Strength, IS 302-1)	-	3000	-
21.2(Mechanical Strength, IS 302-1)	-	3000	-
22.1(Construction, IS 302-1)	-	3000	-
22.7(Construction as per Cl 22.7, IS 3.02-2-15)	-	3000	-
22.107(Construction as per Cl 22.7, IS 3.02-2-15)	-	3000	-
22.108(Construction as per Cl 22.8, IS 3.02-2-15)	-	3000	-
23.1(Internal Wiring, IS 302-1)	-	3000	-
23.2(Internal Wiring, IS 302-1)	-	3000	-
23.4(Internal Wiring, IS 302-1)	-	3000	-
23.5(Internal Wiring, IS 302-1)	-	3000	-
23.6(Internal Wiring, IS 302-1)	-	3000	-
23.7(Internal Wiring, IS 302-1)	-	3000	-
23.8(Internal Wiring, IS 302-1)	-	3000	-
23.9(Internal Wiring, IS 302-1)	-	3000	-
23.1O(Internal Wiring, IS 302-1)	-	3000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.9(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
26(Terminals for External Conductors, IS 302-1)	-	3000	-
27.1(Provision for Earthing, IS 302-1)	-	3000	-
27.2(Provision for Earthing, IS 302-1)	-	3000	-
27.3(Provision for Earthing, IS 302-1)	-	3000	-
27.4(Provision for Earthing, IS 302-1)	-	3000	-
27.5(Provision for Earthing, IS 302-1)	-	3000	-
28(Screws & Connections, IS 302-1)	-	3000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	3000	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	3000	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	3000	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	3000	-
31(Resistance of Rusting, IS 302-1)	-	3000	-
6(Classification- IS 302-1)	-	3000	-
7.5(Marking- IS 302-1)	-	3000	-
7.1O(Marking- IS 302-1)	-	3000	-
7.11(Marking- IS 302-1)	-	3000	-
15(MOISTURE RESISTANCE)	-	3000	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	3000	-

20 Jun, 2026

-
Included w.e.f. 14.10.2025 Exclusion: "18 (ENDURANCE) 19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.4 (Surge immunity test) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Harmonics) 22.106 (Interlocks) 24 (Components) 32 (RADIATION, TOXICITY AND SIMILAR HAZARDS) 9 (STARTING OF MOTOR-OPERATED APPLIANCES) "

3950

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 1364 : Part 1 (2023)

Hexagon head bolts, screws, and nuts of property grades A and B: Part 1 Hexagon head bolts (Size range M1.6 to M64) (sixth revision)

All Grade / Type / Size / Designation

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(Dimensions)	-	2500	-
Cl-5, Table-7(General requirements)	-	2500	-
Cl-5, Table-7(Thread-Tolerance class)	-	1000	-
Cl-5, Table-7(Mechanical properties- Steel)	-	2500	-
Cl-5, Table-7(Mechanical properties-Stainless steel)	-	2500	-
Cl-5, Table-7(Tolerances-Product grade)	-	500	-
Cl-5, Table-7(Surface condition -Electroplated coatings)	-	1500	-
Cl-5, Table-7(Surface condition- Non-electrolytically applied zinc flake)	-	1500	-
Cl-5, Table-7(Surface condition - Hot dip galvanized coatings)	-	1500	-
Cl-5, Table-7(Surface integrity- Limits for surface discontinuities)	-	1500	-
Cl-6(Marking)	-	500	-

-
Included w.e.f. 31.07.2025

3951

RAHUL ENGINEERS LABORATORY PRIVATE LIMITED

8189106

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

ORDINARY PORTLAND CEMENT

21100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 Table-3 v(Transverse Strength - IS 4031 Part 8 (Optional))	-	4000	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iii b(Setting Time Final)	-	700	-
7 Table-3 iii a(Setting Time Initial)	-	700	-
7 Table-3 ii b(Expansion after aeration)	-	2400	-
7 Table-3 ii b(Expansion by Autoclave)	-	2400	-
7 Table-3 ii a(Expansion after aeration)	-	1500	-
7 Table-3 ii a(Expansion by Le Chatelier)	-	1500	-
7 Table-3 i.(Fineness)	-	2400	-
6.1 Table-2 viii(Alkali content)	-	600	-
6.1 Table-2 vii(Chloride content)	-	600	-
6.1 Table-2 vi(Loss on ignition)	-	600	-
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	600	-
6.1 Table-2 iv(Magnesia)	-	600	-
6.1 Table-2 iii.(Insoluble residue)	-	600	-
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	600	-
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	600	-
6 - Table - 1 viii(Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	600	-
6 - Table - 1 vii(Chloride content - Cl 4.13 of IS 4032:1985)	-	600	-
6 - Table - 1 vi(Loss on ignition - Cl 4.2 of IS 4032:1985)	-	600	-
6 - Table - 1 v(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	600	-
6 - Table - 1 iv(Magnesia - Cl 4.8 of IS 4032:1985)	-	600	-
6 - Table - 1 iii(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	600	-
6 - Table - 1 ii(Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985)	-	600	-
6 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	600	-
7 Table-3 v(Transverse Strength - IS 4031 Part 8 (Optional))	-	4000	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iii b(Setting Time Final)	-	700	-
7 Table-3 iii a(Setting Time Initial)	-	700	-
7 Table-3 ii b(Expansion after aeration)	-	2400	-
7 Table-3 ii b(Expansion by Autoclave)	-	2400	-
7 Table-3 ii a(Expansion after aeration)	-	1500	-
7 Table-3 ii a(Expansion by Le Chatelier)	-	1500	-
7 Table-3 i.(Fineness)	-	2400	-
6.1 Table-2 viii(Alkali content)	-	600	-
6.1 Table-2 vii(Chloride content)	-	600	-
6.1 Table-2 vi(Loss on ignition)	-	600	-
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	600	-
6.1 Table-2 iv(Magnesia)	-	600	-
6.1 Table-2 iii.(Insoluble residue)	-	600	-
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	600	-
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	600	-
6 - Table - 1 viii( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	600	-
6 - Table - 1 vii(Chloride content - Cl 4.13 of IS 4032:1985)	-	600	-
6 - Table - 1 vi(Loss on ignition - Cl 4.2 of IS 4032:1985)	-	600	-
6 - Table - 1 v(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	600	-
6 - Table - 1 iv(Magnesia - Cl 4.8 of IS 4032:1985)	-	600	-
6 - Table - 1 iii(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	600	-
6 - Table - 1 ii(Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985)	-	600	-
6 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	600	-
7.1.8(Pump efficiency shall be as per 11.4)	-	5000	-
Clause 7 Table 3, SI No. (v) (Compressive strength of Transverse Specimen, 672 ± 4 h)	-	1100	-
Clause 7 Table 3, SI No. (v) (Compressive strength of Transverse Specimen, 168 ± 2 h)	-	4000	-
Clause 7 Table 3, SI No. (v) (Compressive strength of Transverse Specimen, 72 ± 1 h)	-	4000	-
Clause 7 Table 3, SI No. (v) (Transverse Strength, 672 ± 4 h)	-	4000	-
Clause 7 Table 3, SI No. (v) (Transverse Strength, 168 ± 2 h)	-	4000	-
Clause 7 Table 3, SI No. (v) (Transverse Strength, 72 ± 1 h)	-	4000	-
7 Table-3 v(Transverse Strength - IS 4031 Part 8 (Optional))	-	4000	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iii b(Setting Time Final)	-	700	-
7 Table-3 iii a(Setting Time Initial)	-	700	-
7 Table-3 ii b(Expansion after aeration)	-	2400	-
7 Table-3 ii b(Expansion by Autoclave)	-	2400	-
7 Table-3 ii a(Expansion after aeration)	-	1500	-
7 Table-3 ii a(Expansion by Le Chatelier)	-	1500	-
7 Table-3 i.(Fineness)	-	2400	-
6.1 Table-2 viii(Alkali content)	-	600	-
6.1 Table-2 vii(Chloride content)	-	600	-
6.1 Table-2 vi(Loss on ignition)	-	600	-
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	600	-
6.1 Table-2 iv(Magnesia)	-	600	-
6.1 Table-2 iii.(Insoluble residue)	-	600	-
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	600	-
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	600	-
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	600	-
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	600	-
6.1 Table-2 iii.(Insoluble residue)	-	600	-
6.1 Table-2 iv(Magnesia)	-	600	-
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	600	-
6.1 Table-2 vi(Loss on ignition)	-	600	-
6.1 Table-2 vii(Chloride content)	-	600	-
7 Table-3 i.(Fineness)	-	2400	-
7 Table-3 ii a(Expansion by Le Chatelier)	-	1500	-
7 Table-3 ii a(Expansion after aeration)	-	1500	-
7 Table-3 ii b(Expansion by Autoclave)	-	2400	-
7 Table-3 ii b(Expansion after aeration)	-	2400	-
7 Table-3 iii a(Setting Time Initial)	-	700	-
7 Table-3 iii b(Setting Time Final)	-	700	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 v(Transverse Strength - IS 4031 Part 8 (Optional))	-	1100	-

-
Clause 7 Table 3, SI No. (v) (Transverse Strength, 168 ± 2 h) Clause 7 Table 3, SI No. (v) (Transverse Strength, 672 ± 4 h) Clause 7 Table 3, SI No. (v) (Transverse Strength, 72 ± 1 h)

3952

EKO PRO ENGINEERS PRIVATE LIMITED (32/37) GHAZIABAD

8164006

IS 2830 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes - Specification (Third Revision)

C15,C18,C20,C15MMn,C18MMn,C20MMn,C15HMn,C18HMn,C20HMn,C25HMn

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9(Workmanship)	-	500	-
Cl 10.1(Workmanship)	-	500	-
Cl 10.2(Workmanship)	-	500	-
Cl 10.2(Press)	-	500	-
Cl 10.3(Workmanship)	-	500	-
Cl 11(Length, Width & Thickness)	-	500	-
Cl 9(Workmanship)	-	500	-
Cl 10.1.a)(Workmanship)	-	500	-
Cl 10.1.b)(Workmanship)	-	500	-
Cl 10.2(Press)	-	500	-
Cl 10.3(Workmanship)	-	500	-
Cl 11(Length, Width & Thickness)	-	500	-
Cl 9(Workmanship)	-	500	-
Cl 10.1(Workmanship)	-	500	-
Cl 10.2(Workmanship)	-	500	-
Cl 10.2(Press)	-	500	-
Cl 10.3(Workmanship)	-	500	-
Cl 11(Length)	-	500	-
6.1(Carbon %)	-	500	-
6.1(Manganese %)	-	5000	-
6.1(Phosphorus %)	-	5000	-
6.1(Sulphur %)	-	5000	-
6.1(Silicon %)	-	5000	-
6.1( Copper %)	-	5000	-
6.1( Aluminium %)	-	5000	-
6.1( Nb)	-	5000	-
6.1(V)	-	5000	-
6.1( Ti)	-	5000	-
6.1(Cr)	-	5000	-
6.1(Mo)	-	5000	-
6.1(Ni)	-	5000	-
6.1( Nitrogen%)	-	5000	-
6.1(Carbon %)	-	5000	-
6.1(Manganese %)	-	5000	-
6.1(Phosphorus %)	-	5000	-
6.1(Sulphur %)	-	5000	-
6.1(Silicon %)	-	5000	-
6.1( Copper %)	-	5000	-
6.1( Aluminium %)	-	5000	-
6.1( Nb)	-	5000	-
6.1(V)	-	5000	-
6.1( Ti)	-	5000	-
6.1(Cr)	-	5000	-
6.1(Mo)	-	5000	-
6.1(Ni)	-	5000	-
6.1( Nitrogen%)	-	5000	-
6.1(Carbon %)	-	5000	-
6.1(Manganese %)	-	5000	-
6.1(Phosphorus %)	-	5000	-
6.1(Sulphur %)	-	5000	-
6.1(Silicon %)	-	5000	-
6.1( Copper %)	-	5000	-
6.1( Aluminium %)	-	5000	-
6.1( Nb)	-	5000	-
6.1(V)	-	5000	-
6.1( Ti)	-	5000	-
6.1(Cr)	-	5000	-
6.1(Mo)	-	5000	-
6.1(Ni)	-	5000	-
6.1(Nitrogen%)	-	5000	-
11(Thickness)	-	500	-
11(Width)	-	500	-
Clause 6.1(IS 2830 : 2012)	-	500	-
Cl. 11.2(Out of Squareness)	-	500	-
Cl. 10.3(Camber)	-	500	-
Cl. 10.2(Bend)	-	500	-
Clause 10.3(Camber)	-	500	-
Clause 10.2(Bend)	-	500	-
Cl 11(Length, Width & Thickness)	-	500	-
Cl 10.3(Workmanship)	-	500	-
Cl 10.2(Press)	-	500	-
Cl 10.2(Workmanship)	-	500	-
Cl 10.1(Workmanship)	-	500	-
Cl 9(Workmanship)	-	500	-
Cl 9(Workmanship)	-	500	-
Cl 10.1(Workmanship)	-	500	-
Cl 10.2(Workmanship)	-	500	-
Cl 10.2(Press)	-	500	-
Cl 10.3(Workmanship)	-	500	-
Cl 11(Length, Width & Thickness)	-	500	-
Clause 6, Table 1 Note : 1(By Calculation)	-	5000	-
Clause 6, Table 1 Note : 3(By Calculation)	-	5000	-
6(Carbon as C - IS:228)	-	5000	-
6(Manganese as Mn-IS:228)	-	5000	-
6(Sulphur as S- IS:228)	-	5000	-
6(carbon equivalent (CE))	-	5000	-
6(Micro alloying elements)	-	5000	-
6(Sulphur + Phosphorus)	-	5000	-
6(Copper as Cu)	-	5000	-
8(Selection of Test samples)	-	500	-
12(Tolerance - IS 2830)	-	500	-
13(Marking)	-	500	-
Clause 6, Table 1 Note : 1(Carbon Equivalent)	-	5000	-
Clause 6, Table 1 Note : 3(Nb+V+Ti)	-	5000	-
Clause 6, Table 1 Note : 9(S+P)	-	5000	-
Clause 9(Freedom from Defect)	-	500	-
4(Supply of material)	-	500	-
5(Manufacture)	-	500	-
6.1(Chemical method)	-	5000	-
6.2(Copper bearing quality)	-	5000	-
6.3(Check Analysis)	-	5000	-
10.2(Bend)	-	500	-
10.3(Chamber)	-	500	-
11(Dimensions)	-	500	-
12(Tolrences)	-	500	-
13(Marking)	-	500	-
Cl 6.1(Carbon)	-	5000	-
Cl 6.1(Sulphur)	-	5000	-
Cl 6.1(Phosphorous)	-	5000	-
Cl 6.1(Manganese)	-	5000	-
Cl 6.1(Silicon)	-	5000	-
Cl 6.1(Nitrogen)	-	5000	-
Cl 6.1(Carbon Equivalent)	-	5000	-
Cl 6.1(Aluminium)	-	5000	-
Cl 6.1(Nb)	-	5000	-
Cl 6.1(V)	-	5000	-
Cl 6.1(Ti)	-	5000	-
Cl 6.1(Nb+V+Ti)	-	5000	-
Cl 6.1(Sulphur+ Phosphorous)	-	5000	-
Cl 6.1(Copper)	-	5000	-

27 May, 2028

-
Included w.e.f 22.07.2025

3953

Sleen India Biz venture Private Limited, Agra

9139736

IS 2932 (2013)

Enamel, synthetic, exterior: (a) Undercoating (b) Finishing - Specification (Fourth Revision)

23500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.3(Freedom from Coarse Particles)	-	1200	-
6.4(Skin Formation)	-	1200	-
6.5(Thinning Properties)	-	1200	-
6.6(Application Properties)	-	1200	-
6.8(Lead Restriction)	-	1700	-
6.9 Table 2 (1) a. Consistency ( Undercoating and Finishing ) )	-	1200	-
6.9 Table 2 (1) b. Viscosity by ford 80-120 s )	-	1200	-
6.9 Table 2 ( 2) Mass, ( Under coating ) )	-	1200	-
6.9 Table 2 ( 2) Mass, (Finishing ) )	-	1200	-
6.9 Table 2 (3) Drying time, a) Surface dry, ( Under coating ) )	-	1200	-
6.9 Table 2 (3) Drying time, a) Surface dry, ( Finishing ) )	-	1200	-
6.9 Table 2 (b) Hard dry ( Under coating ) )	-	1200	-
6.9 Table 2 (b) Hard dry, (Finishing ) )	-	1200	-
6.9 Table 2 (c) Tack free ( Under coating (Finishing ) )	-	1200	-
6.9 Table 2 (4) a) Finish (Under coating ) )	-	1200	-
6.9 Table 2 (4) a) Finish (Finishing) )	-	1200	-
6.9 Table 2 (b) ) Gloss 60º (Under coating ) )	-	1200	-
6.9 Table 2 (b) ) Gloss 60º (Finishing) )	-	1200	-
6.9 Table 2 (5) Fineness of grind,(Under coating ))	-	1200	-
6.9 Table 2 (5) Fineness of grind,(Finishing))	-	1200	-
6.9 Table 2 (6) Colour , (Finishing))	-	1200	-
6.9 Table 2 (7) Flexibility and adhesion: a) Scratch hardness No such scratch as to show the bare metal after Clause 3 of — (Load 1 000 g) ( Under coating & Finishing ) )	-	1200	-
6.9 Table 2 (b) Bend test (with 6.25 mm 48 h of air in type 1 apparatus) ( Under coating & Finishing ) )	-	1200	-
6.9 Table 2 (8) Flash point ( Under coating & Finishing ) )	-	1200	-
6.9 Table 2 (9) Composition: a) Volume solids ( Under coating ))	-	3000	-
6.9 Table 2 (9) Composition: a) Volume solids ( Finishing))	-	3000	-
6.9 Table 2 (9) Composition:b) Phthalic anhydride content of non-volatile vehicle ( Under coating & Finishing ))	-	3000	-
6.9 Table 2 (10) Resistance to acid ( Under coating & Finishing ))	-	1200	-
6.9 Table 2 (11) Resistance to alkali ( Under coating & Finishing ))	-	1200	-
6.9 Table 2 (12) Accelerated storage stability test ( Under coating & Finishing ))	-	1200	-
6.9 Table 2 (13) Keeping properties ( Under coating & Finishing ))	-	2000	-
6.9 Table 2 (14) Wet opacity ( Under coating & Finishing ))	-	1200	-
6.3(Freedom from Coarse Particles)	-	0	Repeated Clause.
6.4(Skin Formation)	-	0	Repeated Clause.
6.5(Thinning Properties)	-	0	Repeated Clause.
6.6(Application Properties)	-	0	Repeated Clause.
6.8(Lead Restriction)	-	0	Repeated Clause.
6.9 Table 2 (1) a. Consistency ( Undercoating and Finishing ) )	-	0	Repeated Clause.
6.9 Table 2 (1) b. Viscosity by ford 80-120 s )	-	0	Repeated Clause.
6.9 Table 2 ( 2) Mass, ( Under coating ) )	-	0	Repeated Clause.
6.9 Table 2 ( 2) Mass, (Finishing ) )	-	0	Repeated Clause.
6.9 Table 2 (3) Drying time, a) Surface dry, ( Under coating ) )	-	0	Repeated Clause.
6.9 Table 2 (3) Drying time, a) Surface dry, ( Finishing ) )	-	0	Repeated Clause.
6.9 Table 2 (b) Hard dry ( Under coating ) )	-	0	Repeated Clause.
6.9 Table 2 (b) Hard dry, (Finishing ) )	-	0	Repeated Clause.
6.9 Table 2 (c) Tack free ( Under coating (Finishing ) )	-	0	Repeated Clause.
6.9 Table 2 (4) a) Finish (Under coating ) )	-	0	Repeated Clause.
6.9 Table 2 (4) a) Finish (Finishing) )	-	0	Repeated Clause.
6.9 Table 2 (b) ) Gloss 60º (Under coating ) )	-	0	Repeated Clause.
6.9 Table 2 (b) ) Gloss 60º (Finishing) )	-	0	Repeated Clause.
6.9 Table 2 (5) Fineness of grind,(Under coating ))	-	0	Repeated Clause.
6.9 Table 2 (5) Fineness of grind,(Finishing))	-	0	Repeated Clause.
6.9 Table 2 (6) Colour , (Finishing))	-	0	Repeated Clause.
6.9 Table 2 (7) Flexibility and adhesion: a) Scratch hardness No such scratch as to show the bare metal after Clause 3 of — (Load 1 000 g) ( Under coating & Finishing ) )	-	0	Repeated Clause.
6.9 Table 2 (b) Bend test (with 6.25 mm 48 h of air in type 1 apparatus) ( Under coating & Finishing ) )	-	0	Repeated Clause.
6.9 Table 2 (8) Flash point ( Under coating & Finishing ) )	-	0	Repeated Clause.
6.9 Table 2 (9) Composition: a) Volume solids ( Under coating ))	-	0	Repeated Clause.
6.9 Table 2 (9) Composition: a) Volume solids ( Finishing))	-	0	Repeated Clause.
6.9 Table 2 (9) Composition:b) Phthalic anhydride content of non-volatile vehicle ( Under coating & Finishing ))	-	0	Repeated Clause.
6.9 Table 2 (10) Resistance to acid ( Under coating & Finishing ))	-	0	Repeated Clause.
6.9 Table 2 (11) Resistance to alkali ( Under coating & Finishing ))	-	0	Repeated Clause.
6.9 Table 2 (12) Accelerated storage stability test ( Under coating & Finishing ))	-	0	Repeated Clause.
6.9 Table 2 (13) Keeping properties ( Under coating & Finishing ))	-	0	Repeated Clause.
6.9 Table 2 (14) Wet opacity ( Under coating & Finishing ))	-	0	Repeated Clause.
6.7.1.3(QUV apparatus)	-	8000	-
6.2(Condition in container)	-	0	Repeated Clause.
7.2(Marking)	-	250	Repeated Clause.
7.3(BIS Certification Marking)	-	250	0
6.1.1(General- Rosin test)	-	500	-
6.1.2(Total Non-Volatile Content)	-	500	-
6.7.2(Bulk supply)	-	2000	-
6.7.2.1(Bulk supply-Gloss (specular 60º) retention)	-	0	complete Test price for cl. 6.7.2 is 2000/-.
6.7.2.2(Bulk supply- Film characteristics- Colour)	-	0	complete Test price for cl. 6.7.2 is 2000/-.
6.7.2.2(Bulk supply- Film characteristics- Colour)	-	0	complete Test price for cl. 6.7.2 is 2000/-.
6.7.2.2(Bulk supply- Film characteristics-Freedom from Checking)	-	0	complete Test price for cl. 6.7.2 is 2000/-.
6.7.2.2(Bulk supply- Film characteristics-Freedom from Cracking)	-	0	complete Test price for cl. 6.7.2 is 2000/-.
6.7.2.2(Bulk supply- Film characteristics-Freedom from Flaking)	-	0	complete Test price for cl. 6.7.2 is 2000/-.
6.7.2.2(Bulk supply- Film characteristics-Freedom from Chalking)	-	0	complete Test price for cl. 6.7.2 is 2000/-.
6.7.2.2(Bulk supply- Film characteristics-Freedom from Spotting)	-	0	complete Test price for cl. 6.7.2 is 2000/-.
6.7.2.2(Bulk supply- Film characteristics-Freedom from Blisters and Corrosion)	-	0	complete Test price for cl. 6.7.2 is 2000/-.
6.7.2.2(Bulk supply- Film characteristics-Protection against corrosion)	-	0	complete Test price for cl. 6.7.2 is 2000/-.
" 6.9 Table 2, xiii) Keeping properties "("Keeping properties 1. Visual observation (Corrosion and odour of putrefaction, rancidity or souring) [Cl 3.1 of IS 101 (Part 6/Sec 2)]")	-	0	Repeated Clause.
" 6.9 Table 2, xiii) Keeping properties "("Keeping properties 2. Change in skinning [Cl.3.1,Table 1 of IS 101 (Part 6/Sec 2)]")	-	0	Repeated Clause.
" 6.9 Table 2, xiii) Keeping properties "("Keeping properties 3. Degree of settling [Cl.3.2,Table 2 of IS 101 (Part 6/Sec 2)]")	-	0	Repeated Clause.
" 6.9 Table 2, xiii) Keeping properties "("Keeping properties 4. Observation of dried film [Cl.3.4, Table 1 of IS 101 (Part 6/Sec 2)]")	-	0	Repeated Clause.
" 6.9 Table 2, xiii) Keeping properties "("Keeping properties 5. Loss of mass resulting from Storage [Cl.3.5 of IS 101 (Part 6/Sec 2)]")	-	0	Repeated Clause.
6.7.1.3(QUV apparatus)	-	0	-
6.2(Condition in container)	-	0	-
7.2(Marking)	-	0	-
7.3(BIS Certification Marking)	-	0	-
6.1.1(General- Rosin test)	-	0	-
6.1.2(Total Non-Volatile Content)	-	0	-
6.7.2(Bulk supply)	-	0	-
6.7.2.1(Bulk supply-Gloss (specular 60º) retention)	-	0	-
6.7.2.2(Bulk supply- Film characteristics- Colour)	-	0	-
6.7.2.2(Bulk supply- Film characteristics- Colour)	-	0	-
6.7.2.2(Bulk supply- Film characteristics-Freedom from Checking)	-	0	-
6.7.2.2(Bulk supply- Film characteristics-Freedom from Cracking)	-	0	-
6.7.2.2(Bulk supply- Film characteristics-Freedom from Flaking)	-	0	-
6.7.2.2(Bulk supply- Film characteristics-Freedom from Chalking)	-	0	-
6.7.2.2(Bulk supply- Film characteristics-Freedom from Spotting)	-	0	-
6.7.2.2(Bulk supply- Film characteristics-Freedom from Blisters and Corrosion)	-	0	-
6.7.2.2(Bulk supply- Film characteristics-Protection against corrosion)	-	0	-
" 6.9 Table 2, xiii) Keeping properties "("Keeping properties 1. Visual observation (Corrosion and odour of putrefaction, rancidity or souring) [Cl 3.1 of IS 101 (Part 6/Sec 2)]")	-	0	-
" 6.9 Table 2, xiii) Keeping properties "("Keeping properties 2. Change in skinning [Cl.3.1,Table 1 of IS 101 (Part 6/Sec 2)]")	-	0	-
" 6.9 Table 2, xiii) Keeping properties "("Keeping properties 3. Degree of settling [Cl.3.2,Table 2 of IS 101 (Part 6/Sec 2)]")	-	0	-
" 6.9 Table 2, xiii) Keeping properties "("Keeping properties 4. Observation of dried film [Cl.3.4, Table 1 of IS 101 (Part 6/Sec 2)]")	-	0	-
" 6.9 Table 2, xiii) Keeping properties "("Keeping properties 5. Loss of mass resulting from Storage [Cl.3.5 of IS 101 (Part 6/Sec 2)]")	-	0	-

-
Included w.e.f. 07.08.2025

3954

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

250000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12(Charging of metal-ion batteries)	-	5000	5% Discount for BIS
6(Classification- IS 302-1)	-	100	-
5(General conditions for the tests)	-	100	-
19.11.4.7(Harmonics)	-	25000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	25000	-
19.11.4.5(Immunity to conducted discharges)	-	30000	-
19.11.4.4(Surge immunity test)	-	25000	-
19.11.4.3(Fast transient bursts)	-	25000	-
19.11.4.2(Radiated fields)	-	45000	-
19.11.4.1(Electrostatic discharges)	-	25000	-
11.8(Temperature rise)	-	10000	-
11.7(Duration corresponding)	-	0	-
11.6(Combined appliances)	-	10000	-
11.5(Motor-operated appliances)	-	10000	-
11.4(Heating appliances)	-	10000	-
8.1.5(Live parts of built-in appliances)	-	1000	-
18(Endurance)	-	5000	-
17(Overload protection of transformers and associated circuits)	-	5000	-
16(Leakage current and electric strength)	-	2500	-
4(General requirement)	-	500	-
32.1(Radiation Toxicity and Similar Hazards)	-	2000	-
31(Resistance to Rusting)	-	1000	-
30.2(Needle Flame Test)	-	2500	-
30.2(Glow Wire Test)	-	5000	-
30.1(Ball pressure test)	-	2000	-
29(clearance, creepage distances and solid insulation)	-	5000	-
28(Screw test and connections)	-	5000	-
27.1(Provision for Earthing, IS 302-1)	-	5000	-
26(Terminals for external conductors)	-	1500	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
24(Components)	-	5000	-
23.1(Internal Wiring, IS 302-1)	-	5000	-
22.1(Construction, IS 302-1)	-	10000	-
21.1(Mechanical Strength, IS 302-1)	-	2500	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	2000	-
19(Abnormal Operation)	-	10000	-
18(Endurance)	-	10000	-
17(Over Load Protection of Transformers and associated circuits)	-	0	-
16.3(Electric Strength (after clause 15 and 16.2))	-	0	-
16.2(Leakage Current (after Clause 15))	-	0	-
16.1(General)	-	0	-
16.0(General)	-	1000	-
15.3(Humidity Test)	-	5000	-
15.2(Spillage Test)	-	5000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	10000	-
15.0(Moisture resistance)	-	5000	-
14(Transient Over Voltages)	-	5000	-
13.3(Electric Strength at operating temperature)	-	1000	-
13.2(Leakage current at operating temperature)	-	1000	-
13(Leakage current and electric strength at operating temperature)	-	1000	-
11.3(Heating)	-	2500	-
11.2(General)	-	0	-
11.1(General)	-	5000	-
10.2(Current input)	-	0	-
10.1(Power input)	-	5000	-
9(Starting of motor operation test requirements and tests)	-	5000	-
8.1.4(Protection against live parts against protective impedance)	-	0	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	0	-
8.1.2(Protection against live parts in openings)	-	0	-
8.1.1(Protection against live parts in all positions)	-	0	-
7(Marking and instructions)	-	1000	-
A.2(Earth continuity test)	-	0	-
Annex C(Ageing test on motors)	-	500	-
Annex D(Thermal motor protectors)	-	500	-
15.2(Moisture resistance)	-	0	-
19.17(Abnormal Operation, IS 302-1)	-	0	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	0	-
21.2(Mechanical Strength, IS 302-1)	-	0	-
21.3(Mechanical Strength, IS 302-1)	-	0	-
22.5(Construction)	-	0	-
22.6(Construction, IS 302-1)	-	0	-
22.11(Construction, IS 302-1)	-	0	-
22.16(Construction)	-	0	-
22.32(Construction, IS 302-1)	-	0	-
22.42(Construction)	-	0	-
23.3(Internal Wiring, IS 302-1)	-	0	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	0	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
26.5(Terminals for external conductors)	-	0	-
27.5(Provision for Earthing, IS 302-1)	-	0	-
28.1(Screws and connections)	-	0	-
22.2(Construction, IS 302-1)	-	0	-
22.3(Construction, IS 302-1)	-	0	-
B.22.4(Construction, IS 302-1)	-	0	-
B.22.5(Construction, IS 302-1)	-	0	-
12(Charging of metal-ion batteries)	-	0	-
6(Classification- IS 302-1)	-	0	-
5(General conditions for the tests)	-	0	-
19.11.4.7(Harmonics)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
11.8(Temperature rise)	-	0	-
11.7(Duration corresponding)	-	0	-
11.6(Combined appliances)	-	0	-
11.5(Motor-operated appliances)	-	0	-
11.4(Heating appliances)	-	0	-
8.1.5(Live parts of built-in appliances)	-	0	-
18(Endurance)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
16(Leakage current and electric strength)	-	0	-
4(General requirement)	-	0	-
32.1(Radiation Toxicity and Similar Hazards)	-	0	-
31(Resistance to Rusting)	-	0	-
30.2(Needle Flame Test)	-	0	-
30.2(Glow Wire Test)	-	0	-
30.1(Ball pressure test)	-	0	-
29(clearance, creepage distances and solid insulation)	-	0	-
28(Screw test and connections)	-	0	-
27.1(Provision for Earthing, IS 302-1)	-	0	-
26(Terminals for external conductors)	-	0	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
24(Components)	-	0	-
23.1(Internal Wiring, IS 302-1)	-	0	-
22.1(Construction, IS 302-1)	-	0	-
21.1(Mechanical Strength, IS 302-1)	-	0	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	0	-
19(Abnormal Operation)	-	0	-
18(Endurance)	-	0	-
17(Over Load Protection of Transformers and associated circuits)	-	0	-
16.3(Electric Strength (after clause 15 and 16.2))	-	0	-
16.2(Leakage Current (after Clause 15))	-	0	-
16.1(General)	-	0	-
16.0(General)	-	0	-
15.3(Humidity Test)	-	0	-
15.2(Spillage Test)	-	0	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	0	-
15.0(Moisture resistance)	-	0	-
14(Transient Over Voltages)	-	0	-
13.3(Electric Strength at operating temperature)	-	0	-
13.2(Leakage current at operating temperature)	-	0	-
13(Leakage current and electric strength at operating temperature)	-	0	-
11.3(Heating)	-	0	-
11.2(General)	-	0	-
11.1(General)	-	0	-
10.2(Current input)	-	0	-
10.1(Power input)	-	0	-
9(Starting of motor operation test requirements and tests)	-	0	-
8.1.4(Protection against live parts against protective impedance)	-	0	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	0	-
8.1.2(Protection against live parts in openings)	-	0	-
8.1.1(Protection against live parts in all positions)	-	0	-
7(Marking and instructions)	-	0	-
A.2(Earth continuity test)	-	1000	-
Annex C(Ageing test on motors)	-	1000	-
Annex D(Thermal motor protectors)	-	1000	-
15.2(Moisture resistance)	-	1000	-
19.17(Abnormal Operation, IS 302-1)	-	5000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	5000	-
21.2(Mechanical Strength, IS 302-1)	-	0	-
21.3(Mechanical Strength, IS 302-1)	-	0	-
22.5(Construction)	-	0	-
22.6(Construction, IS 302-1)	-	0	-
22.11(Construction, IS 302-1)	-	0	-
22.16(Construction)	-	0	-
22.32(Construction, IS 302-1)	-	0	-
22.42(Construction)	-	0	-
23.3(Internal Wiring, IS 302-1)	-	0	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	0	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
26.5(Terminals for external conductors)	-	0	-
27.5(Provision for Earthing, IS 302-1)	-	0	-
28.1(Screws and connections)	-	0	-
22.2(Construction, IS 302-1)	-	0	-
22.3(Construction, IS 302-1)	-	0	-
B.22.4(Construction, IS 302-1)	-	0	-
B.22.5(Construction, IS 302-1)	-	0	-

-
Included w.e.f. 04.08.2025 "Domestic Electric Clothes Washing Machines (For testing charges please refer part 2 standard in LIMS)"

3955

PAAM Testing Labs Private Limited, Greater Noida

8185506

IS 513 : Part 1 (2016)

Cold reduced carbon steel sheet and strip: Part 1 cold forming and drawing purpose (Sixth Revision)

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Chemical Composition)	-	5000	-
8(Mechanical and Physical Properties)	-	5000	-
Cl 8(UTM)	-	1000	-
Cl 9(Workmanship)	-	100	-
Cl 9.6(Workmanship)	-	100	-
Cl 10(Workmanship)	-	100	-
Cl 11(Length, Width & Thickness)	-	1000	-
Cl 8(UTM)	-	1000	-
Cl 9.5(Workmanship)	-	100	-
Cl 9.6(Workmanship)	-	100	-
Cl 10(Workmanship)	-	100	-
Cl 11(Length, Width & Thickness)	-	1000	-
Cl 8(UTM)	-	0	-
Cl 9(Workmanship)	-	0	-
Cl 9.6(Workmanship)	-	0	-
Cl 10(Workmanship)	-	0	-
Cl 11(Length, Width & Thickness)	-	0	-
7.0(ALUMINIUM)	-	500	-
7.0(MICRO ALLOYS)	-	2500	-
7.0(NITROGEN)	-	1000	-
7.0(SILICON)	-	500	-
7.0(MANGANESE)	-	500	-
7.0(PHOSPHORUS)	-	500	-
7.0(SULPHUR)	-	500	-
7.0(CARBON)	-	500	-
Cl. 11(Out of square)	-	100	-
Cl. 11(Flatness)	-	100	-
Cl. 11(Camber)	-	100	-
Cl. 11(Width)	-	100	-
Cl. 11(Thickness)	-	500	-
Cl. 8.7(Bake Hardening Index)	-	800	-
Cl. 8.6 Table 5A, 5B & 5C(Tensile Strain Hardening Component (n-Value))	-	800	-
Cl. 8.5 Table 5A, 5B & 5C(Plastic Strain Ratio (r bar/r-90))	-	800	-
Cl. 8.4(Bend Test)	-	800	-
Cl. 8.3 Table 6(Hardness Test ( Only for CR0 & CR1))	-	1000	-
Cl. 8.2(Cupping Test(Only for sheet and coils CR2, CR3, CR4(having thickness 0.5 mm-2.0 mm))	-	1000	-
Cl. 8.1 & Table 5A, 5B & 5C(Elongation at 80 mm gauge length)	-	1000	-
Cl. 8.1 & Table 5A, 5B & 5C(Elongation at 50 mm gauge length)	-	1000	-
Cl. 8.1 & Table 5A, 5B & 5C(Yield Stress)	-	1000	-
Cl. 9 Table 8(Surface roughness)	-	1000	-
Cl 11(Length, Width & Thickness)	-	1000	-
Cl 10(Workmanship)	-	0	-
Cl 9.6(Workmanship)	-	0	-
Cl 9(Workmanship)	-	0	-
Cl 8(UTM)	-	0	-
Cl 8(UTM)	-	0	-
Cl 9(Workmanship)	-	0	-
Cl 9.6(Workmanship)	-	0	-
Cl 10(Workmanship)	-	0	-
Cl 11(Thickness (08))	-	0	-
Cl 7(UTM)	-	0	-
8.1(Mechanical)	-	0	-
8.2(Cupping test)	-	0	-
8.3(Hardness HRB/HV)	-	0	-
8.4(Bend Test)	-	0	-
8.5(Plastic strain ratio)	-	0	-
8.6(Tensile strain Hardening component)	-	0	-
8.7(Black Hardening Index)	-	0	-
9(Surface finish)	-	0	-
10(Freedom from defects)	-	100	-
13(Marking)	-	100	-
Cl. 7.3(Carbon)	-	0	-
Cl. 7.3(Manganese)	-	0	-
Cl. 7.3(Suphur)	-	0	-
Cl. 7.3(Phosphorus)	-	0	-
Cl. 7.3(Silicon)	-	500	-

08 May, 2028

-
-

3956

AA Electro Magnetic Laboratory Pvt Ltd, Gurugram

8165826

IS/IEC 62368 : Part 1 (2023)

Audio Video Information and Communication Technology Equipment - Part 1: Safety Requirements (Second Revision)

192300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(General- materials, components)	-	1500	-
Cl-4.2(Energy source classifications)	-	500	-
Cl-4.3(Protection against energy sources)	-	500	-
Cl-4.4(Safeguards)	-	500	-
Cl-4.5(Explosion)	-	500	-
Cl-4.6(Fixing of conductors and conductive parts)	-	800	-
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	600	-
Cl-4.8(Equipment containing coin or button cell batteries)	-	2500	-
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	500	-
Cl-4.10(Components requirements)	-	600	-
Cl-5.1(General- Electrically-caused injury)	-	600	-
Cl-5.2(Classification and limits of electrical energy sources)	-	2000	-
Cl-5.3(Protection against electrical energy sources)	-	2000	-
Cl-5.4(Insulation materials and requirements)	-	6000	-
Cl-5.5(Components as safeguards)	-	2500	-
Cl-5.6(Protective conductor)	-	2500	-
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	2500	-
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	1000	-
Cl-6.1(General- Electrically-caused fire)	-	600	-
Cl-6.2(Classification of power sources and potential ignition sources)	-	2500	-
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	2500	-
Cl-6.4(Safeguards against fire under single fault conditions)	-	2500	-
Cl-6.5(Internal and external wiring)	-	2500	-
Cl-7.1(General- Injury caused by hazardous substances)	-	400	-
Cl-7.2(Reduction of exposure to hazardous substances)	-	2500	-
Cl-7.3(Ozone exposure)	-	500	-
Cl-7.4(Use of personal safeguards or personal protective equipment (PPE)	-	400	-
Cl-7.5(Use of instructional safeguards and instructions)	-	400	-
Cl-8.1(General- Mechanically-caused injury)	-	400	-
Cl-8.2(Mechanical energy source classifications)	-	400	-
Cl-8.3(Safeguards against mechanical energy sources)	-	500	-
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	2500	-
Cl-8.5(Safeguards against moving parts)	-	2500	-
Cl-8.6(Stability of equipment)	-	2000	-
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	2000	-
Cl-8.8(Handle strength)	-	1500	-
Cl-8.9(Wheels or casters attachment requirements)	-	1000	-
Cl-8.10(Carts, stands, and similar carriers)	-	1000	-
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	1500	-
Cl-9.1(General-Thermal burn injury)	-	500	-
Cl-9.2(Thermal energy source classifications)	-	2500	-
Cl-9.3(Touch temperature limits)	-	4500	-
Cl-9.4(Safeguards against thermal energy sources)	-	600	-
Cl-9.5(Requirements for safeguards)	-	500	-
Cl-9.6(Requirements for wireless power transmitters)	-	0	-
Cl-10.1(General-Radiation)	-	0	-
Cl-10.2(Radiation energy source classifications)	-	0	-
Cl-10.3(Safeguards against laser radiation)	-	0	-
Cl-10.4("Safeguards against optical radiation from lamps and lamp systems (including LED types)")	-	0	-
Cl-10.6(Safeguards against acoustic energy sources)	-	0	-
Annex A(Examples of equipment within the scope of this document)	-	0	-
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	400	-
Annex B-2(Normal operating conditions)	-	5000	-
Annex B-3(Simulated abnormal operating conditions)	-	6000	-
Annex B-4(Simulated single fault conditions)	-	4000	-
Annex C-1(Protection of materials in equipment from UV radiation)	-	400	-
Annex C-2(UV light conditioning test)	-	5000	-
Annex D-1(Impulse test generators)	-	1500	-
Annex D-2(Antenna interface test generator)	-	0	-
Annex D-3(Electronic pulse generator)	-	0	-
Annex E-1(Electrical energy source classification for audio signals)	-	2500	-
Annex E-2(Audio signals used during test)	-	2500	-
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	2500	-
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	500	-
Annex F-2(Letter symbols and graphical symbols)	-	500	-
Annex F-3(Equipment markings)	-	500	-
Annex F-4(Instructions)	-	500	-
Annex F-5(Instructional safeguards)	-	500	-
Annex G-1(Switches)	-	15000	-
Annex G-2(Relays)	-	3000	-
Annex G-3(Protective devices)	-	2000	-
Annex G-4(Connectors)	-	2000	-
Annex G-5(Wound components)	-	2000	-
Annex G-6(Wire insulation)	-	2000	-
Annex G-7(Mains power supply cords and interconnection cables)	-	2000	-
Annex G-8(Varistors)	-	2000	-
Annex G-9(Integrated circuit (IC) current limiters)	-	2000	-
Annex G-10(Resistors)	-	2000	-
Annex G-11(Capacitors and RC units)	-	2000	-
Annex G-12(Optocouplers)	-	2000	-
Annex G-13(Printed boards)	-	2000	-
Annex G-14(Coatings on component terminals)	-	2000	-
Annex G-15(Pressurized liquid filled components or LFC assemblies)	-	2000	-
Annex G-16(IC that includes a capacitor discharge function (ICX))	-	2000	-
Annex H-1(General- Criteria for telephone ringing signals)	-	500	-
Annex H-2(Method A)	-	1500	-
Annex H-3(Method B)	-	500	-
Annex I(Overvoltage categories (see IEC 60364-4-44))	-	500	-
Annex J-1(General-Insulated winding wires for use without interleaved insulation)	-	0	-
Annex J-2(Type tests)	-	0	-
Annex J-3(Testing during manufacturing)	-	0	-
Annex K-1(General- Safety interlocks)	-	0	-
Annex K-2(Components of the safety interlock safeguard mechanism)	-	0	-
Annex K-3(Inadvertent change of operating mode)	-	0	-
Annex K-4(Interlock safeguard override)	-	0	-
Annex K-5(Fail-safe)	-	0	-
Annex K-6(Mechanically operated safety interlocks)	-	0	-
Annex K-7(Interlock circuit isolation)	-	0	-
Annex L-1(General requirements)	-	500	-
Annex L-2(Permanently connected equipment)	-	500	-
Annex L-3()	-	500	-
Annex L-4(Single-phase equipment)	-	500	-
Annex L-5(Three-phase equipment)	-	500	-
Annex L-6(Switches as disconnect devices)	-	500	-
Annex L-7(Plugs as disconnect devices)	-	500	-
Annex L-8(Multiple power sources)	-	500	-
Annex L-9(Compliance criteria)	-	500	-
Annex M-1(General requirements)	-	1000	-
Annex M-2(Safety of batteries and their cells)	-	1000	-
Annex M-3(Protection circuits for batteries provided within the equipment)	-	5000	-
Annex M-4(Additional safeguards for equipment containing a secondary lithium battery)	-	5000	-
Annex M-5(Risk of burn due to short-circuit during carrying)	-	1000	-
Annex M-6(Safeguards against short-circuits)	-	200	-
Annex M-7(Risk of explosion from lead acid and NiCd batteries)	-	200	-
Annex M-8("Protection against internal ignition from external spark sources of rechargeable batteries with aqueous electrolyte")	-	500	-
Annex M-9(Preventing electrolyte spillage)	-	500	-
Annex M-10(Instructions to prevent reasonably foreseeable misuse)	-	500	-
Annex N(Electrochemical potentials (V))	-	0	-
Annex O(Measurement of creepage distances and clearances)	-	2000	-
Annex P-1(General-Safeguards against conductive objects)	-	0	-
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	2500	-
Annex P-3(Safeguards against spillage of internal liquids)	-	2500	-
Annex P-4(Metallized coatings and adhesives securing parts)	-	500	-
Annex Q-1(Limited power source)	-	2000	-
Annex Q-2(Test for external circuits – paired conductor cable)	-	500	-
Annex R(Limited short-circuit test)	-	500	-
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	0	-
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	500	-
Annex S-3(Flammability tests for the bottom of a fire enclosure)	-	500	-
Annex S-4(Flammability classification of materials)	-	500	-
Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W)	-	500	-
Annex S-6(Grille covering material, cloth, and reticulated foam)	-	0	-
Annex T-1(General-Mechanical strength tests)	-	0	-
Annex T-2(Steady force test, 10 N)	-	200	-
Annex T-3(Steady force test, 30 N)	-	200	-
Annex T-4(Steady force test, 100 N)	-	200	-
Annex T-5(Steady force test, 250 N)	-	200	-
Annex T-6(Enclosure impact test)	-	500	-
Annex T-7(Drop test)	-	500	-
Annex T-8(Stress relief test)	-	500	-
Annex T-9(Glass impact test)	-	500	-
Annex T-10(Glass fragmentation test)	-	0	-
Annex T-11(Test for telescoping or rod antennas)	-	0	-
Annex V-1(Accessible parts of equipment)	-	0	-
Annex V-2(Accessible part criterion)	-	0	-
Annex W(Comparison of terms introduced in this document)	-	0	-
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	0	-
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	0	-
Annex Y-2(Resistance to UV radiation)	-	500	-
Annex Y-3(Resistance to corrosion)	-	500	-
Annex Y-4(Gaskets)	-	500	-
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	500	-
Annex Y-6(Mechanical strength of enclosures)	-	0	-
Cl-10.5(Safeguards against X-radiation)	-	500	-
Annex U("Mechanical strength of CRTs and protection against the effects of implosion")	-	0	-

24 Sep, 2026

-
Included w.e..f 28.07.2025

3957

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET) : IPT-BHUBANESWAR

5102634

IS 13422 (2024)

Single-use Sterile Rubber Surgical Gloves ï¿½ Specification (First Revision)

Type – 1 / Type – 2

10325 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(Materials)	-	1500	-
Cl-6(Sampling and selection of test pieces)	-	375	-
Cl-7.1(Dimensions)	-	375	-
Cl-7.2(Watertightness)	-	750	-
Cl-7.3(Tensile properties)	-	1475	-
Cl-7.3.1(General)	-	375	-
Cl-7.3.2(Force at break and elongation at break before accelerated ageing)	-	975	-
Cl-7.3.3(Force at break and elongation at break after accelerated ageing)	-	4500	-
Cl-7.3.4(Force required to produce 300 % elongation)	-	0	-
Cl-9(Marking.)	-	0	-
Cl-5(Materials)	-	0	-
Cl-6(Sampling and selection of test pieces)	-	0	-
Cl-7.1(Dimensions)	-	0	-
Cl-7.2(Watertightness)	-	0	-
Cl-7.3(Tensile properties)	-	0	-
Cl-7.3.1(General)	-	0	-
Cl-7.3.2(Force at break and elongation at break before accelerated ageing)	-	0	-
Cl-7.3.3(Force at break and elongation at break after accelerated ageing)	-	0	-
Cl-7.3.4(Force required to produce 300 % elongation)	-	0	-
Cl-9(Marking.)	-	0	-
Cl-5(Materials)	-	0	-
Cl-6(Sampling and selection of test pieces)	-	0	-
Cl-7.1(Dimensions)	-	0	-
Cl-7.2(Watertightness)	-	0	-
Cl-7.3(Tensile properties)	-	0	-
Cl-7.3.1(General)	-	0	-
Cl-7.3.2(Force at break and elongation at break before accelerated ageing)	-	0	-
Cl-7.3.3(Force at break and elongation at break after accelerated ageing)	-	0	-
Cl-7.3.4(Force required to produce 300 % elongation)	-	0	-
Cl-9(Marking.)	-	0	-
Cl-5(Materials)	-	0	-
Cl-6(Sampling and selection of test pieces)	-	0	-
Cl-7.1(Dimensions)	-	0	-
Cl-7.2(Watertightness)	-	0	-
Cl-7.3(Tensile properties)	-	0	-
Cl-7.3.1(General)	-	0	-
Cl-7.3.2(Force at break and elongation at break before accelerated ageing)	-	0	-
Cl-7.3.3(Force at break and elongation at break after accelerated ageing)	-	0	-
Cl-7.3.4(Force required to produce 300 % elongation)	-	0	-
Cl-9(Marking.)	-	0	-

31 Dec, 2026

-
Included w.e.f.22.07.2025 Exclusion Cl-7.4(sterlity))

3958

Hi Physix Laboratory India Private Limited, Pune

7126926

IS 13340 : PART 1 (2024)

Shunt Power Capacitors of the Self-Healing Type for a.c. Systems Having a Rated Voltage up to and Including 1 000 V Part 1 General - Performance, Testing and Rating - Safety Requirements - Guide for Installation and Operation (Second Revision)

upto 50kVAr

249650.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Capacitance measurement and output calculation)	-	24000.00	-
8(Measurement of the tangent of the loss angle (tan δ) of the capacitor)	-	11000.00	-
9(Voltage tests between terminals)	-	3000.00	-
10(Voltage tests between terminals and container)	-	3000.00	-
11(Voltage tests between terminals and container)	-	5500.00	-
12(Sealing test)	-	11000.00	-
13(Thermal stability test)	-	24000.00	-
14("Measurement of the tangent of the loss angle (tan δ) of the capacitor at elevated temperature")	-	24000.00	-
7(Capacitance measurement and output calculation)	-	0	-
15(Lightning impulse voltage test between terminals and container)	-	10000.00	-
16(Discharge test)	-	12000.00	-
17(Ageing test)	-	51150.00	-
18(Self-healing test)	-	11000.00	-
19(Destruction test)	-	31000.00	-
20(Maximum permissible voltage)	-	8000.00	-
20.1(Long-duration voltages)	-	0	-
20.2(Long-duration voltages)	-	0	-
21(Maximum permissible current)	-	8000.00	-
22(Discharge device)	-	5500.00	-
23("Container connections ")	-	5000.00	-
24(Protection of the environment)	-	0	-
25(Other safety requirements)	-	0	-
26(Marking of the unit)	-	1250.00	-
26.1(Rating plate)	-	0	-
26.2(Standardized connection symbols)	-	0	-
26.3(Warning plate)	-	0	-
27(Marking of the bank)	-	1250.00	-
27.1(Instruction sheet or rating plate)	-	0	-
27.2(Warning plate)	-	0	-
28(General)	-	0	-
29(9 Choice of the rated voltage)	-	0	-
30(Operating temperature)	-	0	-
31(Special service conditions)	-	0	-
32(2 Overvoltages)	-	0	-
33(Overload currents)	-	0	-
34(Switching and protective devices and connections)	-	0	-
36(Capacitors connected to systems with audio-frequency remote control)	-	0	-
36(Capacitors connected to systems with audio-frequency remote control)	-	0	-
37(Electromagnetic compatibility (EMC))	-	0	-
7(Capacitance measurement and output calculation)	-	0	-
8(Measurement of the tangent of the loss angle (tan δ) of the capacitor)	-	0	-
9(Voltage tests between terminals)	-	0	-
10(Voltage tests between terminals and container)	-	0	-
11(Voltage tests between terminals and container)	-	0	-
12(Sealing test)	-	0	-
13(Thermal stability test)	-	0	-
14("Measurement of the tangent of the loss angle (tan δ) of the capacitor at elevated temperature")	-	0	-
7(Capacitance measurement and output calculation)	-	0	-
15(Lightning impulse voltage test between terminals and container)	-	0	-
16(Discharge test)	-	0	-
17(Ageing test)	-	0	-
18(Self-healing test)	-	0	-
19(Destruction test)	-	0	-
20(Maximum permissible voltage)	-	0	-
20.1(Long-duration voltages)	-	0	-
20.2(Long-duration voltages)	-	0	-
21(Maximum permissible current)	-	0	-
22(Discharge device)	-	0	-
23("Container connections ")	-	0	-
24(Protection of the environment)	-	0	-
25(Other safety requirements)	-	0	-
26(Marking of the unit)	-	0	-
26.1(Rating plate)	-	0	-
26.2(Standardized connection symbols)	-	0	-
26.3(Warning plate)	-	0	-
27(Marking of the bank)	-	0	-
27.1(Instruction sheet or rating plate)	-	0	-
27.2(Warning plate)	-	0	-
28(General)	-	0	-
29(9 Choice of the rated voltage)	-	0	-
30(Operating temperature)	-	0	-
31(Special service conditions)	-	0	-
32(2 Overvoltages)	-	0	-
33(Overload currents)	-	0	-
34(Switching and protective devices and connections)	-	0	-
36(Capacitors connected to systems with audio-frequency remote control)	-	0	-
36(Capacitors connected to systems with audio-frequency remote control)	-	0	-
37(Electromagnetic compatibility (EMC))	-	0	-

20 Jun, 2028

-
Included w.e.f. 04.08.2025

3959

INDIAN TESTING LABORATORY PRIVATE LIMITED, GREATER NOIDA

8171306

IS 17953 (2023)

uPVC Profiles for Windows And Doors Specification

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No.5.1.1(UV Resistant Virgin Material)	-	2500	-
Cl. No.5.1.2(Non-UV Resistant Virgin Material)	-	2500	-
Cl. No.5.1.3, a), Table no. 1(i)(Monoextrusion or coextrusion of a layer of any visible surface)	-	800	-
Cl. No.5.1.3, a), Table no. 1(ii)("Non-visible surface and material covered by coextrusion")	-	800	-
Cl.No.5.2(Appearance of uPVC Profile)	-	1500	-
Cl.No.5.3.1and3.2.5, Table no. 2(i)(Depth (D))	-	1000	-
Cl.No.5.3.1and3.2.5, Table no. 2(ii)(Width (W))	-	1000	-
Cl.No.5.3.1and3.2.5, Table no. 2(iii)("Sight visible surface wall thickness, Max ")	-	1000	-
Cl.No.5.3.1and3.2.5, Table no. 2(iv)("Sight visible surface flatness, Max ")	-	1000	-
Cl.No.5.3.1and3.2.5, Table no. 2(v)(Parallelism, Max)	-	1000	-
Cl.No.5.3.2(Wall Thickness of Main Profiles)	-	1000	-
Cl.No.5.3.3(Tolerances on other Dimensions)	-	1000	-
Cl.No.5.3.4(Straightness)	-	1000	-
Cl.No.5.4(Mass of Profile)	-	2000	-
Cl.No.5.5("Heat Reversion ")	-	80000	-
Cl.No.5.6(Resistance to Impact of Falling Mass)	-	8000	-
Cl.No.5.7(Heat Ageing)	-	10000	-
Cl.No.5.8.1(Tensile Bending Test)	-	10000	-
Cl.No.5.8.2(Compression Bending Test)	-	10000	-
Cl.No.5.9.(Charpy Impact Resistance of Main Profile)	-	10000	-
Cl.No.5.10.(Resistance to Weathering)	-	800000	Complete Test Rs. 50000/-(Exclusive of Resistance to weathering test) Rs. 800000/- for Resistance to Weathering test.
Cl.No.5.11(Density)	-	2000	-
Cl.No.8(Marking)	-	100	-

15 Aug, 2028

-
Included w.e.f.22.07.2025

3960

National Test House (WR) - NTH, Mumbai

7107604

IS 513 : Part 2 (2016)

Cold reduced carbon steel sheet and strip: Part 2 high tensile and multi - Phase steel (Sixth Revision)

All ISC Grades and product range up to 3.00 mm

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7(UTM)	-	3000	NA
Cl. 7.2 Table 7(Bend Test)	-	1000	NA
Cl 9(Workmanship)	-	1000	NA
Cl 10(Length, Width & Thickness)	-	1000	NA
8.2(Erichson cupping test - IS 10175 for CR2, CR3, CR4 Grades from 0.5 - 2.0 mm Thickness)	-	1500	-
8.3(Rockwell Hardness test -HRB - IS:1586)	-	2000	-
7.3(Tensile strain hardening component - IS 15756)	-	3000	-
9(Freedom from defects)	-	1000	-
6.0(CARBON)	-	500	-
6.0(MANGANESE)	-	500	-
6.0(SILICON)	-	500	-
6.0(SULPHUR)	-	500	-
6.0(PHOSPHORUS)	-	500	-
6.0(MICRO ALLOYS)	-	500	-
6.0(ALUMINIUM)	-	500	-
6.0(NITROGEN)	-	500	-

24 Jul, 2025

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number