BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15393 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

3901

VERTEX TESTING LABORATORY PRIVATE LIMITED, GHAZIABAD

8185906

IS 15477 (2019)

Adhesives for use with ceramic tiles and mosaics

Type-1/2/3/4/5

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Classification)	-	1000	-
5.1(Tensile Adhesion Strength )	-	2000	-
5.1(Tensile Adhesion Strength)	-	2000	-
5.2(Shear Adhesion Strength )	-	2000	-
5.2(Shear Adhesion Strength)	-	2000	-
5.2(Shear Adhesion Strength)	-	2000	-
5.3(OpenTime)	-	2000	-
5.4(Adjustment Time)	-	2000	-
5.5(Slip (Required for Vertical Application Only))	-	1000	-
5.6(Deformability (Required for VerticalApplication Only))	-	1000	-
8.2(Marking)	-	1000	-
4(Classification)	-	0	-
5.1(Tensile Adhesion Strength )	-	0	-
5.1(Tensile Adhesion Strength)	-	0	-
5.2(Shear Adhesion Strength )	-	0	-
5.2(Shear Adhesion Strength)	-	0	-
5.2(Shear Adhesion Strength)	-	0	-
5.3(OpenTime)	-	0	-
5.4(Adjustment Time)	-	0	-
5.5(Slip (Required for Vertical Application Only))	-	0	-
5.6(Deformability (Required for VerticalApplication Only))	-	0	-
8.2(Marking)	-	0	-

23 May, 2028

-
Included w.e.f 18.08.2025

3902

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 5897 (1985)

Specification for aluminium and aluminium alloy welding rods and wires and magnesium alloy welding rods (First Revision)

0.6,0.8,1.0,1.2,1.6,2.0,2.4,3.2,4.0,5.0 mm

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Supply of Material)	-	35000	-
4.1(Diameters of rods and wires)	-	35000	-
4.2(Length of Rods (Cut Lengths))	-	35000	-
5.1(Particular diameter of wire)	-	35000	-
5.2(Flanges of spools)	-	35000	-
6(Reeling Conditions)	-	35000	-
7.1(Filler rods and wires)	-	35000	-
7.2(Temper and Cast of Wire)	-	35000	-
9.1(Chemical composition of aluminium and aluminium alloy)	-	35000	-
9.2(Chemical composition of magnesium alloy filler rods)	-	35000	-
11(Usability Test)	-	35000	-
14(Marking)	-	35000	-

31 Dec, 2026

-
Included w.e.f. 29.07.2025

3903

POWERONIC TEST & RESEARCH CENTRE PRIVATE LIMITED, GREATER NOIDA

8170206

IS 4250 (2025)

Electric Food-Mixers (Liquidizers and Grinders) and Centrifugal Juicers ï¿½ Specification ( Second Revision )

ALL

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	100	-
Cl-5(General Conditions for the tests)	-	100	-
Cl-6(Classification)	-	100	-
Cl-7(Marking)	-	100	-
Cl-8(Safety Requirements)	-	100	-
Cl-9(Endurance fpr motor and base assembly)	-	1000	-
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	1500	-
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	1000	-
Cl-10.4(Idli Batter)	-	1000	-
Cl-10.5(Operational Tests for Juicers)	-	1000	-
Cl-11(Temperature Withstand Test for Bowl)	-	1000	-
Cl-12.1(Test for Switches)	-	1000	-
Cl-13(Strength of Assembly)	-	1500	-
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	500	-
Cl-14.2, Table-2 (ii)(Power input and current)	-	1000	-
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	1000	-
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	1000	-
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	1000	-
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	1000	-

11 Apr, 2028

-
Included w.e.f. 28.07.2025 Exclusion "Cl-19.11.4.1 (Electrostatic discharges) Cl-19.11.4.2 (Radiated fields) Cl-19.11.4.3 (Fast transient bursts) Cl-19.11.4.4 (Surge immunity test) Cl-19.11.4.5 (Immunity to conducted discharges) Cl-19.11.4.6 (Class 3 Voltage dips and interruptions) Cl-19.11.4.7 (Harmonics)"

3904

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 18471 (2025)

Fasteners - Drilling Screws with Tapping Screw Thread - Specification (first revision)

Drilling Screws with Tapping Screw Thread

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 4.0(Dimenssions.)	-	25000	-
Clause. 4.0(Thread size.)	-	25000	-
Clause. 4.0(Length)	-	25000	-
Clause.5.0(Dimenssions.)	-	25000	-
Clause.6.1(Steel drilling screws)	-	25000	-
Clause. 6.2(Stainless steel Drilling Screws)	-	25000	-
Clause. 7.0(Thhreads)	-	25000	-
Clause. 8.0(Tolerance)	-	25000	-
Clause 9.0(Finish(coating))	-	25000	-
Clause.10(Designation)	-	25000	-
Clause.10(Marking)	-	25000	-
Clause. 4.0(Dimenssions.)	-	-	-
Clause. 4.0(Thread size.)	-	-	-
Clause. 4.0(Length)	-	-	-
Clause.5.0(Dimenssions.)	-	-	-
Clause.6.1(Steel drilling screws)	-	-	-
Clause. 6.2(Stainless steel Drilling Screws)	-	-	-
Clause. 7.0(Thhreads)	-	-	-
Clause. 8.0(Tolerance)	-	-	-
Clause 9.0(Finish(coating))	-	-	-
Clause.10(Designation)	-	-	-
Clause.10(Marking)	-	-	-

31 Dec, 2026

-
Included w.e.f 23.07.2025

3905

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 10701 (2012)

Structural plywood - Specification (First Revision)

17250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.3(Glue Shear strength in dry state)	-	2000	For Glue shear strength
11.4.1(Resistance to Water)	-	2000	For resistance to water test
11.4.2(Resistance to Water)	-	2000	For resistance to water test
11.5(Resistance to Micro-organisms)	-	1000	For resistance to microorganisms, test
11.6(Tensile Strength)	-	6000	For mechanical tests
11.7.1(Compressive Strength, Bending Strength, Panel Shear Strength, Plate Shear Strength and Rolling Shear Strngth)	-	6000	For mechanical tests
11.8(Wet Bending Strength)	-	5999.98	For mechanical tests
Clause 11.2(Moisture content)	-	1250	For moisture content test
Cl-8(Dimension and tolerances)	-	5000	For dimension and other qualitative test
Cl-9(Workmanship and finish)	-	4999.99	For dimension and other qualitative test
Cl-7.1(Veneers)	-	5000	For dimension and other qualitative test
Cl-7.2(Construction)	-	5000	For dimension and other qualitative test
Cl-11.9(Retention of preservatives)	-	5000	For dimension and other qualitative test
Cl-4(Material)	-	5000	For dimension and other qualitative test
Cl-5(Plywood)	-	5000	For dimension and other qualitative test
Clause. 7.3(Consruction Inclination)	-	5000	For dimension and other qualitative test
Clause. 7.4(Moisture content)	-	1250	For moisture content test
Cl-8.2(Thicnkess)	-	5000	For dimension and other qualitative test
Cl-8.3.1(Length)	-	5000	For dimension and other qualitative test
Cl-8.3.1(width)	-	5000	For dimension and other qualitative test
Cl-8.3.1(Tolerances- Thickness)	-	5000	For dimension and other qualitative test
Cl-8.3.1(Edge Straightness)	-	5000	For dimension and other qualitative test
Cl-8.3.1(Squareness)	-	5000	For dimension and other qualitative test
Cl-11.6, Table-3 (i)((Modulus of Rupture: Across the Face Grain: Min Ind.))	-	5000	For dimension and other qualitative test
Cl-11.8, Table-4((Modulus of Rupture: Across the Face Grain: Avg))	-	5000	For dimension and other qualitative test
Cl-11.8, Table-4((Modulus of Rupture: Along the Face Grain: Min Ind))	-	5000	For dimension and other qualitative test
Cl-11.8, Table-4(Modulus of Rupture: Along the Face Grain: Avg))	-	5000	For dimension and other qualitative test
Cl-11.8, Table-4(Modulus of Elasticity: Across the Face Grain: Min Ind)	-	5000	For dimension and other qualitative test
Cl-11.8, Table-4((Modulus of Elasticity: Across the Face Grain: Avg))	-	5000	For dimension and other qualitative test
Cl-11.8, Table-4((Modulus of Elasticity: Along the Face Grain: Min Ind))	-	5000	For dimension and other qualitative test

-
Included w.e.f 22.07.2025

3906

DELHI TEST HOUSE (65) KUNDLI-2 SONIPAT

9138006

IS 18112 (2025)

DIGITAL TELEVISION RECEIVER FOR SATELLITE BROADCAST TRANSMISSION SPECIFICATION (First Revision)

410000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.4, Table-2, ii)(RF characteristics to be supported by the DTV receiver)	-	10000	-
Clause 4.3(Specifications)	-	10000	-
Clause 4.5(Safety Requirements)	-	35000	-
Clause 4.6(Electromagnetic Compatibility (EMC) Requirements)	-	150000	-
Clause 5(Marking)	-	5000	-
Clause 6(Operating Life Test)	-	30000	-
Clause 4.1, Table-1, i) a)(Hardware specification)	-	3000	-
Clause 4.1, Table-1, i) b)(Decompression and decoding of SDTV video)	-	5000	-
Clause 4.1, Table-1, i) c)(Decompression and decoding of HDTV video)	-	5000	-
Clause 4.1, Table-1, i) d)(Decompression and decoding of audio)	-	5000	-
Clause 4.1, Table-1, i) e)(Active Format descriptors)	-	5000	-
Clause 4.1, Table-1, i) f)(Captioning and Sub-titling)	-	5000	-
Clause 4.1, Table-1, i) g)(Teletext)	-	5000	-
Clause 4.1, Table-1, i) h)(Multi-language support)	-	2000	-
Clause 4.1, Table-1, i) j)(DTV receiver mixed Audio Description)	-	5000	-
Clause 4.1, Table-1, i) k)(Broadcast mixed audio description)	-	5000	-
Clause 4.1, Table-1, i) m)(Service demultiplexing)	-	5000	-
Clause 4.1, Table-1, i) n)(Data services)	-	5000	-
Clause 4.1, Table-1, i) p)(OSD)	-	5000	-
Clause 4.1, Table-1, i) q)(DTV character set)	-	5000	-
Clause 4.1, Table-1, i) r)(Electronic Service Guide (ESG) ‘Now/Next’)	-	5000	-
Clause 4.1, Table-1, i) s)(Time)	-	2000	-
Clause 4.1, Table-1, i) t)(Digital TV output)	-	2000	-
Clause 4.4, Table-2, i) b)(Frequency)	-	2000	-
Clause 4.4, Table-2, i) a)(Input voltage range)	-	2000	-
Clause 4.1,Table-1, ii) a)(Demodulation and FEC decoding)	-	5000	-
Clause 4.1, Table-1, ii) b)(DTV Receiver Installation)	-	2000	-
Clause 4.1, Table-1, ii) c)(Network evolution)	-	2000	-
Clause 4.4, Table-2, iii) c)(RF input impedance)	-	5000	-
Clause 4.1, Table-1, ii) d)(Services available)	-	2000	-
Clause 4.1, Table-1, ii) e)(Selection via Service List)	-	2000	-
Clause 4.1, Table-1, ii) f)(Selection via Numeric Entry)	-	2000	-
Clause 4.1, Table-1, ii) g)(Favourite Channel list)	-	2000	-
Clause 4.1, Table-1, ii) h)(Hidden Services)	-	2000	-
Clause 4.4, Table-2, iii) b)(Input frequency range)	-	5000	-
Clause 4.1, Table-1, ii) j)(Logical Channel Number for Satellite services)	-	2000	-
Clause 4.1, Table-1, ii) k)(RF input signal)	-	3000	-
Clause 4.1, Table-1, ii) m)(LNB supply current)	-	5000	-
Clause 4.1, Table-1, ii) n)(LNB supply voltage)	-	3000	-
Clause 4.1, Table-1, ii) p)(LNB Control)	-	2000	-
Clause 4.1, Table-1, ii) q)(Modulation/Demodulation parameters for DVB-S & DVB-S2 standard)	-	2000	-
Clause 4.4, Table-2, iii) a)(Input level per carrier)	-	5000	-
Clause 4.4, Table-2, iv) c)(RF input impedance)	-	5000	-
Clause 4.4, Table-2, iv) b)(Input frequency range)	-	5000	-
Clause 4.4, Table-2, iv) a)(Input level per carrier)	-	5000	-
Clause 4.4, Table-2, v)(Symbol rate)	-	5000	-
Clause 4.4, Table-2, vi)(RF input return loss)	-	5000	-
Clause 4.4, Table-2, vii)(DisEqC)	-	2000	-
Clause 4.4, Table-2, viii)(Operating ambient temperature range)	-	2000	-
Clause 4.4, Table-2, ix)(Operating humidity range)	-	2000	-
Clause 4.1, Table-1, iii) a)(Interfaces, Connectors)	-	2000	-
Clause 4.1, Table-1, iv)(Automatic software upgrade mechanism)	-	2000	-
Clause 4.1, Table-1, v) a)(Remote Control)	-	2000	-
Clause 4.1, Table-1, v) b)(Easy to use and simple documentation)	-	2000	-
Clause 3.1, Table-1, v) c)(Support package)	-	2000	-

31 Dec, 2026

-
Included w.e.f. 31.07.2025

3907

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 1254 (2025)

Corrugated Aluminium Sheet (Fifth Revision)

19000,19002,31000,31000A,31200,31500,31500B,31500C,40800,41352,51300,53800,81400,81400A

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(FREEDOM FROM DEFECTS)	-	15000	-
Cl-5(SUPPLY OF MATERIALS)	-	15000	-
Cl-6(PROFILE)	-	15000	-
Cl-7(MATERIAL)	-	15000	-
Cl-8.1(Tolerance on the thickness)	-	15000	-
Cl-8.2(Width)	-	15000	-
Cl-8.3(Length)	-	15000	-
Cl-8.4(Squareness)	-	15000	-
Cl-8.5(Depth and Pitch of the Corrugation)	-	15000	-
Cl-10(Finish)	-	15000	-
Cl-12(Marking)	-	15000	-
Cl-4(FREEDOM FROM DEFECTS)	-	-	-
Cl-5(SUPPLY OF MATERIALS)	-	-	-
Cl-6(PROFILE)	-	-	-
Cl-7(MATERIAL)	-	-	-
Cl-8.1(Tolerance on the thickness)	-	-	-
Cl-8.2(Width)	-	-	-
Cl-8.3(Length)	-	-	-
Cl-8.4(Squareness)	-	-	-
Cl-8.5(Depth and Pitch of the Corrugation)	-	-	-
Cl-10(Finish)	-	-	-
Cl-12(Marking)	-	-	-

31 Dec, 2026

-
Included w.e.f 23.07.2025

3908

VIRIDIAN TESTING LABORATORIES LLP, TIRUPUR

6169806

IS 17334 (2025)

Textiles - Medical/Surgical Gowns and Medical/Surgical Drapes - Specification (First Revision)

62600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(Workmanship and Finish)	-	0	-
Cl-5.1, 6.2 Table-1 (i)(Impact penetration (g))	-	2000	-
Cl-5.1, 6.2 Table-1 (ii)(Hydrostatic resistance (cmwc), the rate of rising at 60 cmwc/min)	-	2000	-
Cl-5.1, 6.2 Table-1 (iii)(Blood penetration resistance, pressure cycle upto 14 kPa, procedure D)	-	6000	-
Cl-5.1, 6.2 Table-1 (iv)(Viral penetration resistance, pressure cycle upto 14 kPa, procedure D)	-	15000	-
Cl-5.1, 6.2 Table-1 (vi)(Tensile strength (dry and wet) (N))	-	2000	-
Cl-5.1, 6.2 Table-1 (vii)(Bursting strength (dry and wet) (kPa))	-	2000	-
Cl-5.1, 6.2 Table-1 (viii)(Cleanliness-microbial (CFU/100 cm2))	-	3600	-
Cl-5.1, 6.2 Table-1 (ix)(Resistance to microbial penetration — Dry (CFU))	-	15000	-
Cl-5.1, 6.2 Table-1 (x)(Resistance to microbial penetration — Wet (IB))	-	15000	-
Cl-5.1, 6.2 Table-2 (i)(Impact penetration (g))	-	0	-
Cl-5.1, 6.2 Table-2 (ii)(Hydrostatic resistance (cmwc), the rate of rising at 60 cmwc/min)	-	0	-
Cl-5.1, 6.2 Table-2 (iii)(Blood penetration resistance, pressure cycle upto 14 kPa, procedure D)	-	0	-
Cl-5.1, 6.2 Table-2 (v)(Tensile strength (dry and wet) (N))	-	0	-
Cl-5.1, 6.2 Table-2 (vi)(Bursting strength (dry and wet) (kPa))	-	0	-
Cl-5.1, 6.2 Table-2 (vii)(Cleanliness-microbial (CFU/100 cm2))	-	0	-
Cl-5.3(Barrier Properties)	-	0	-
Cl-7(Marking)	-	0	-
Cl-5.1, 6.2 Table-2 (viii)(Resistance to microbial penetration — Dry (CFU))	-	0	-
Cl-5.1, 6.2 Table-2 (ix)(Resistance to microbial penetration — Wet (IB))	-	0	-
Cl-4(Workmanship and Finish)	-	0	-
Cl-5.1, 6.2 Table-1 (i)(Impact penetration (g))	-	0	-
Cl-5.1, 6.2 Table-1 (ii)(Hydrostatic resistance (cmwc), the rate of rising at 60 cmwc/min)	-	0	-
Cl-5.1, 6.2 Table-1 (iii)(Blood penetration resistance, pressure cycle upto 14 kPa, procedure D)	-	0	-
Cl-5.1, 6.2 Table-1 (iv)(Viral penetration resistance, pressure cycle upto 14 kPa, procedure D)	-	0	-
Cl-5.1, 6.2 Table-1 (vi)(Tensile strength (dry and wet) (N))	-	0	-
Cl-5.1, 6.2 Table-1 (vii)(Bursting strength (dry and wet) (kPa))	-	0	-
Cl-5.1, 6.2 Table-1 (viii)(Cleanliness-microbial (CFU/100 cm2))	-	0	-
Cl-5.1, 6.2 Table-1 (ix)(Resistance to microbial penetration — Dry (CFU))	-	0	-
Cl-5.1, 6.2 Table-1 (x)(Resistance to microbial penetration — Wet (IB))	-	0	-
Cl-5.1, 6.2 Table-2 (i)(Impact penetration (g))	-	0	-
Cl-5.1, 6.2 Table-2 (ii)(Hydrostatic resistance (cmwc), the rate of rising at 60 cmwc/min)	-	0	-
Cl-5.1, 6.2 Table-2 (iii)(Blood penetration resistance, pressure cycle upto 14 kPa, procedure D)	-	0	-
Cl-5.1, 6.2 Table-2 (v)(Tensile strength (dry and wet) (N))	-	0	-
Cl-5.1, 6.2 Table-2 (vi)(Bursting strength (dry and wet) (kPa))	-	0	-
Cl-5.1, 6.2 Table-2 (vii)(Cleanliness-microbial (CFU/100 cm2))	-	0	-
Cl-5.3(Barrier Properties)	-	0	-
Cl-7(Marking)	-	0	-
Cl-5.1, 6.2 Table-2 (viii)(Resistance to microbial penetration — Dry (CFU))	-	0	-
Cl-5.1, 6.2 Table-2 (ix)(Resistance to microbial penetration — Wet (IB))	-	0	-

20 Feb, 2028

-
Included w.e.f. 04.08.2025 Exclusion: Cl-5.1, 6.2 Table-1 (v) (Particle release), (xii) ("Breathability test (water vapour transmission rate), [g/m2/day, Max]"), (xi) (1) ("Biocompatibility evaluation test - Cytotoxicity"), (xi) (2) ("Biocompatibility evaluation test - Irritation"), (3) ("Biocompatibility evaluation test - Skin sensitization"), Cl-5.1, 6.2 Table-2 (iv) (Particle release), (x) (1) ("Biocompatibility evaluation test - Cytotoxicity"), (2) ("Biocompatibility evaluation test - Irritation"), Cl-5.1, 6.2 Table-2 (x) (3) ("Biocompatibility evaluation test - Skin sensitization")

3909

Accumetrix Testing Solutions Pvt. Ltd.

9188436

IS 13801 (2013)

Chequered Cement Concrete Tiles -

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
(Cl 7, 8 &9)(Length, Breadth, Thickness, Difference in length of side between the longest side and shorterst side in the sample shall not exceed 1 mm, Half tiles, Difference in Thickness between the thickest and thinnest tile in the sample shall not exceed 10 percent of minimum thickness, Depth of chequred groove, Thickness of wearing layer.)	-	500	-
Cl 12.1(Concavity & Convexity )	-	200	-
Cl 12.2(Longest gap between the arms of the square and the edge of the title shall not exceed 2 percent of the length.)	-	200	-
Cl 12.3(Shall not exceed 1 percent of the length of the edge.)	-	200	-
Cl 12.4(Water absorption)	-	500	-
Cl 12.5(Wet transverse strength)	-	1500	-
Cl 12.6(Resistance to wear)	-	2500	-
Cl 11(Finish)	-	100	-
8.3(Thickness of wearing layer)	-	200	-
(Cl 7, 8 &9)(Length, Breadth, Thickness, Difference in length of side between the longest side and shorterst side in the sample shall not exceed 1 mm, Half tiles, Difference in Thickness between the thickest and thinnest tile in the sample shall not exceed 10 percent of minimum thickness, Depth of chequred groove, Thickness of wearing layer.)	-	500	-
Cl 12.1(Concavity & Convexity )	-	200	-
Cl 12.2(Longest gap between the arms of the square and the edge of the title shall not exceed 2 percent of the length.)	-	200	-
Cl 12.3(Shall not exceed 1 percent of the length of the edge.)	-	200	-
Cl 12.4(Water absorption)	-	500	-
Cl 12.5(Wet transverse strength)	-	1500	-
Cl 12.6(Resistance to wear)	-	2500	-
Cl 11(Finish)	-	100	-
(Cl 7, 8 &9)(Length, Breadth, Thickness, Difference in length of side between the longest side and shorterst side in the sample shall not exceed 1 mm, Half tiles, Difference in Thickness between the thickest and thinnest tile in the sample shall not exceed 10 percent of minimum thickness, Depth of chequred groove, Thickness of wearing layer.)	-	500	-
Cl 12.1(Concavity & Convexity )	-	200	-
Cl 12.2(Longest gap between the arms of the square and the edge of the title shall not exceed 2 percent of the length.)	-	200	-
Cl 12.3(Shall not exceed 1 percent of the length of the edge.)	-	200	-
Cl 12.4(Water absorption)	-	500	-
Cl 12.5(Wet transverse strength)	-	1500	-
Cl 12.6(Resistance to wear)	-	2500	-
Cl 11(Finish)	-	100	-
Cl 11(Finish)	-	100	-
Cl 12.6(Resistance to wear)	-	2500	-
Cl 12.5(Wet transverse strength)	-	1500	-
Cl 12.4(Water absorption)	-	500	-
Cl 12.3(Shall not exceed 1 percent of the length of the edge.)	-	200	-
Cl 12.2(Longest gap between the arms of the square and the edge of the title shall not exceed 2 percent of the length.)	-	200	-
Cl 12.1(Concavity & Convexity )	-	200	-
(Cl 7, 8 &9)(Length, Breadth, Thickness, Difference in length of side between the longest side and shorterst side in the sample shall not exceed 1 mm, Half tiles, Difference in Thickness between the thickest and thinnest tile in the sample shall not exceed 10 percent of minimum thickness, Depth of chequred groove, Thickness of wearing layer.)	-	500	-

19 Sep, 2028

-
-

3910

Intertek India Private Limited, New Delhi (E-26)

8136626

IS/IEC 62368 : Part 1 (2023)

Audio Video Information and Communication Technology Equipment - Part 1: Safety Requirements (Second Revision)

167000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(General- materials, components)	-	400	10% discount offered to samples received from BIS.
Cl-4.2(Energy source classifications)	-	400	10% discount offered to samples received from BIS.
Cl-4.3(Protection against energy sources)	-	400	10% discount offered to samples received from BIS.
Cl-4.4(Safeguards)	-	400	10% discount offered to samples received from BIS.
Cl-4.5(Explosion)	-	400	10% discount offered to samples received from BIS.
Cl-4.6(Fixing of conductors and conductive parts)	-	400	10% discount offered to samples received from BIS.
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	1000	10% discount offered to samples received from BIS.
Cl-4.8(Equipment containing coin or button cell batteries)	-	1000	10% discount offered to samples received from BIS.
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	1000	10% discount offered to samples received from BIS.
Cl-4.10(Components requirements)	-	1000	10% discount offered to samples received from BIS.
Cl-5.1(General- Electrically-caused injury)	-	1000	10% discount offered to samples received from BIS.
Cl-5.2(Classification and limits of electrical energy sources)	-	2000	10% discount offered to samples received from BIS.
Cl-5.3(Protection against electrical energy sources)	-	2000	10% discount offered to samples received from BIS.
Cl-5.4(Insulation materials and requirements)	-	10000	10% discount offered to samples received from BIS.
Cl-5.5(Components as safeguards)	-	750	10% discount offered to samples received from BIS.
Cl-5.6(Protective conductor)	-	750	10% discount offered to samples received from BIS.
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	2000	10% discount offered to samples received from BIS.
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	2000	10% discount offered to samples received from BIS.
Cl-6.1(General- Electrically-caused fire)	-	1000	10% discount offered to samples received from BIS.
Cl-6.2(Classification of power sources and potential ignition sources)	-	2000	10% discount offered to samples received from BIS.
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	1000	10% discount offered to samples received from BIS.
Cl-6.4(Safeguards against fire under single fault conditions)	-	2000	10% discount offered to samples received from BIS.
Cl-6.5(Internal and external wiring)	-	1000	10% discount offered to samples received from BIS.
Cl-7.1(General- Injury caused by hazardous substances)	-	0	Applied in Exclusion
Cl-7.2(Reduction of exposure to hazardous substances)	-	500	10% discount offered to samples received from BIS.
Cl-7.3(Ozone exposure)	-	500	10% discount offered to samples received from BIS.
Cl-7.4(Use of personal safeguards or personal protective equipment (PPE)	-	500	10% discount offered to samples received from BIS.
Cl-7.5(Use of instructional safeguards and instructions)	-	500	10% discount offered to samples received from BIS.
Cl-8.1(General- Mechanically-caused injury)	-	1000	10% discount offered to samples received from BIS.
Cl-8.2(Mechanical energy source classifications)	-	1000	10% discount offered to samples received from BIS.
Cl-8.3(Safeguards against mechanical energy sources)	-	1000	10% discount offered to samples received from BIS.
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	1000	10% discount offered to samples received from BIS.
Cl-8.5(Safeguards against moving parts)	-	1000	10% discount offered to samples received from BIS.
Cl-8.6(Stability of equipment)	-	2000	10% discount offered to samples received from BIS.
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	5000	10% discount offered to samples received from BIS.
Cl-8.8(Handle strength)	-	1200	10% discount offered to samples received from BIS.
Cl-8.9(Wheels or casters attachment requirements)	-	1200	10% discount offered to samples received from BIS.
Cl-8.10(Carts, stands, and similar carriers)	-	1200	10% discount offered to samples received from BIS.
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	5000	10% discount offered to samples received from BIS.
Cl-9.1(General-Thermal burn injury)	-	750	10% discount offered to samples received from BIS.
Cl-9.2(Thermal energy source classifications)	-	750	10% discount offered to samples received from BIS.
Cl-9.3(Touch temperature limits)	-	5000	10% discount offered to samples received from BIS.
Cl-9.4(Safeguards against thermal energy sources)	-	750	10% discount offered to samples received from BIS.
Cl-9.5(Requirements for safeguards)	-	750	10% discount offered to samples received from BIS.
Cl-9.6(Requirements for wireless power transmitters)	-	5000	10% discount offered to samples received from BIS.
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	750	10% discount offered to samples received from BIS.
Annex B-2(Normal operating conditions)	-	1200	10% discount offered to samples received from BIS.
Annex B-3(Simulated abnormal operating conditions)	-	1200	10% discount offered to samples received from BIS.
Annex B-4(Simulated single fault conditions)	-	1200	10% discount offered to samples received from BIS.
Annex D-1(Impulse test generators)	-	5000	10% discount offered to samples received from BIS.
Annex D-2(Antenna interface test generator)	-	5000	10% discount offered to samples received from BIS.
Annex E-1(Electrical energy source classification for audio signals)	-	750	10% discount offered to samples received from BIS.
Annex E-2(Audio signals used during test)	-	750	10% discount offered to samples received from BIS.
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	5000	10% discount offered to samples received from BIS.
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	750	10% discount offered to samples received from BIS.
Annex F-2(Letter symbols and graphical symbols)	-	750	10% discount offered to samples received from BIS.
Annex F-3(Equipment markings)	-	750	10% discount offered to samples received from BIS.
Annex F-4(Instructions)	-	750	10% discount offered to samples received from BIS.
Annex F-5(Instructional safeguards)	-	750	10% discount offered to samples received from BIS.
Annex H-1(General- Criteria for telephone ringing signals)	-	750	10% discount offered to samples received from BIS.
Annex H-2(Method A)	-	1200	10% discount offered to samples received from BIS.
Annex H-3(Method B)	-	1200	10% discount offered to samples received from BIS.
Annex I(Overvoltage categories (see IEC 60364-4-44))	-	0	Applied in Exclusion
Annex K-1(General- Safety interlocks)	-	500	10% discount offered to samples received from BIS.
Annex K-2(Components of the safety interlock safeguard mechanism)	-	500	10% discount offered to samples received from BIS.
Annex K-3(Inadvertent change of operating mode)	-	500	10% discount offered to samples received from BIS.
Annex K-4(Interlock safeguard override)	-	500	10% discount offered to samples received from BIS.
Annex K-5(Fail-safe)	-	500	10% discount offered to samples received from BIS.
Annex K-6(Mechanically operated safety interlocks)	-	500	10% discount offered to samples received from BIS.
Annex K-7(Interlock circuit isolation)	-	500	10% discount offered to samples received from BIS.
Annex L-1(General requirements)	-	300	10% discount offered to samples received from BIS.
Annex L-2(Permanently connected equipment)	-	300	10% discount offered to samples received from BIS.
Annex L-3()	-	300	10% discount offered to samples received from BIS.
Annex L-4(Single-phase equipment)	-	300	10% discount offered to samples received from BIS.
Annex L-5(Three-phase equipment)	-	300	10% discount offered to samples received from BIS.
Annex L-6(Switches as disconnect devices)	-	300	10% discount offered to samples received from BIS.
Annex L-7(Plugs as disconnect devices)	-	300	10% discount offered to samples received from BIS.
Annex L-8(Multiple power sources)	-	300	10% discount offered to samples received from BIS.
Annex L-9(Compliance criteria)	-	300	10% discount offered to samples received from BIS.
Annex M-1(General requirements)	-	300	10% discount offered to samples received from BIS.
Annex M-2(Safety of batteries and their cells)	-	5000	10% discount offered to samples received from BIS.
Annex M-3(Protection circuits for batteries provided within the equipment)	-	1200	10% discount offered to samples received from BIS.
Annex M-4(Additional safeguards for equipment containing a secondary lithium battery)	-	1200	10% discount offered to samples received from BIS.
Annex M-5(Risk of burn due to short-circuit during carrying)	-	1200	10% discount offered to samples received from BIS.
Annex M-6(Safeguards against short-circuits)	-	750	10% discount offered to samples received from BIS.
Annex M-7(Risk of explosion from lead acid and NiCd batteries)	-	1200	10% discount offered to samples received from BIS.
Annex M-8("Protection against internal ignition from external spark sources of rechargeable batteries with aqueous electrolyte")	-	1200	10% discount offered to samples received from BIS.
Annex M-9(Preventing electrolyte spillage)	-	750	10% discount offered to samples received from BIS.
Annex N(Electrochemical potentials (V))	-	1000	10% discount offered to samples received from BIS.
Annex O(Measurement of creepage distances and clearances)	-	750	10% discount offered to samples received from BIS.
Annex P-1(General-Safeguards against conductive objects)	-	750	10% discount offered to samples received from BIS.
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	750	10% discount offered to samples received from BIS.
Annex P-3(Safeguards against spillage of internal liquids)	-	750	10% discount offered to samples received from BIS.
Annex P-4(Metallized coatings and adhesives securing parts)	-	5000	10% discount offered to samples received from BIS.
Annex Q-1(Limited power source)	-	750	10% discount offered to samples received from BIS.
Annex Q-2(Test for external circuits – paired conductor cable)	-	750	10% discount offered to samples received from BIS.
Annex R(Limited short-circuit test)	-	0	Applied in Exclusion
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	1200	10% discount offered to samples received from BIS.
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	750	10% discount offered to samples received from BIS.
Annex S-4(Flammability classification of materials)	-	0	Applied in Exclusion
Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W)	-	2000	10% discount offered to samples received from BIS.
Annex T-1(General-Mechanical strength tests)	-	1000	10% discount offered to samples received from BIS.
Annex T-2(Steady force test, 10 N)	-	1000	10% discount offered to samples received from BIS.
Annex T-3(Steady force test, 30 N)	-	750	10% discount offered to samples received from BIS.
Annex T-5(Steady force test, 250 N)	-	2000	10% discount offered to samples received from BIS.
Annex T-6(Enclosure impact test)	-	1000	10% discount offered to samples received from BIS.
Annex T-7(Drop test)	-	1000	10% discount offered to samples received from BIS.
Annex T-8(Stress relief test)	-	3000	10% discount offered to samples received from BIS.
Annex T-9(Glass impact test)	-	1000	10% discount offered to samples received from BIS.
Annex T-10(Glass fragmentation test)	-	500	10% discount offered to samples received from BIS.
Annex T-11(Test for telescoping or rod antennas)	-	2000	10% discount offered to samples received from BIS.
Annex V-1(Accessible parts of equipment)	-	2000	10% discount offered to samples received from BIS.
Annex V-2(Accessible part criterion)	-	2000	10% discount offered to samples received from BIS.
Annex W(Comparison of terms introduced in this document)	-	300	10% discount offered to samples received from BIS.
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	700	10% discount offered to samples received from BIS.
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	5000	10% discount offered to samples received from BIS.
Annex Y-4(Gaskets)	-	0	Applied in Exclusion
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	5000	10% discount offered to samples received from BIS.
Annex T-4(Steady force test, 100 N)	-	750	10% discount offered to samples received from BIS.
Annex S-3(Flammability tests for the bottom of a fire enclosure)	-	2000	10% discount offered to samples received from BIS.
Cl-4.1(General- materials, components)	-	0	Repeated
Cl-4.2(Energy source classifications)	-	0	Repeated
Cl-4.3(Protection against energy sources)	-	0	Repeated
Cl-4.4(Safeguards)	-	0	Repeated
Cl-4.5(Explosion)	-	0	Repeated
Cl-4.6(Fixing of conductors and conductive parts)	-	0	Repeated
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	0	Repeated
Cl-4.8(Equipment containing coin or button cell batteries)	-	0	Repeated
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	0	Repeated
Cl-4.10(Components requirements)	-	0	-
Cl-5.1(General- Electrically-caused injury)	-	0	-
Cl-5.2(Classification and limits of electrical energy sources)	-	0	-
Cl-5.3(Protection against electrical energy sources)	-	0	-
Cl-5.4(Insulation materials and requirements)	-	0	-
Cl-5.5(Components as safeguards)	-	0	-
Cl-5.6(Protective conductor)	-	0	-
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	0	-
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	0	-
Cl-6.1(General- Electrically-caused fire)	-	0	-
Cl-6.2(Classification of power sources and potential ignition sources)	-	0	-
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	0	-
Cl-6.4(Safeguards against fire under single fault conditions)	-	0	-
Cl-6.5(Internal and external wiring)	-	0	-
Cl-8.1(General- Mechanically-caused injury)	-	0	-
Cl-8.2(Mechanical energy source classifications)	-	0	-
Cl-8.3(Safeguards against mechanical energy sources)	-	0	-
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	0	-
Cl-8.5(Safeguards against moving parts)	-	0	-
Cl-8.6(Stability of equipment)	-	0	-
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	0	-
Cl-8.8(Handle strength)	-	0	-
Cl-8.9(Wheels or casters attachment requirements)	-	0	-
Cl-8.10(Carts, stands, and similar carriers)	-	0	-
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	0	-
Cl-9.1(General-Thermal burn injury)	-	0	-
Cl-9.2(Thermal energy source classifications)	-	0	-
Cl-9.3(Touch temperature limits)	-	0	-
Cl-9.4(Safeguards against thermal energy sources)	-	0	-
Cl-9.5(Requirements for safeguards)	-	0	-
Cl-9.6(Requirements for wireless power transmitters)	-	0	-
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	0	-
Annex B-2(Normal operating conditions)	-	0	-
Annex B-3(Simulated abnormal operating conditions)	-	0	-
Annex B-4(Simulated single fault conditions)	-	0	-
Annex D-1(Impulse test generators)	-	0	-
Annex D-2(Antenna interface test generator)	-	0	-
Annex E-1(Electrical energy source classification for audio signals)	-	0	-
Annex E-2(Audio signals used during test)	-	0	-
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	0	-
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	0	-
Annex F-2(Letter symbols and graphical symbols)	-	0	-
Annex F-3(Equipment markings)	-	0	-
Annex F-4(Instructions)	-	0	-
Annex F-5(Instructional safeguards)	-	0	-
Annex H-1(General- Criteria for telephone ringing signals)	-	0	-
Annex H-2(Method A)	-	0	-
Annex H-3(Method B)	-	0	-
Annex I(Overvoltage categories (see IEC 60364-4-44))	-	0	-
Annex K-1(General- Safety interlocks)	-	0	-
Annex K-3(Inadvertent change of operating mode)	-	0	-
Annex K-4(Interlock safeguard override)	-	0	-
Annex K-5(Fail-safe)	-	0	-
Annex L-1(General requirements)	-	0	-
Annex L-2(Permanently connected equipment)	-	0	-
Annex L-3()	-	0	-
Annex L-4(Single-phase equipment)	-	0	-
Annex L-5(Three-phase equipment)	-	0	-
Annex L-6(Switches as disconnect devices)	-	0	-
Annex L-7(Plugs as disconnect devices)	-	0	-
Annex L-8(Multiple power sources)	-	0	-
Annex L-9(Compliance criteria)	-	0	-
Annex M-1(General requirements)	-	0	-
Annex M-2(Safety of batteries and their cells)	-	0	-
Annex M-3(Protection circuits for batteries provided within the equipment)	-	0	-
Annex M-4(Additional safeguards for equipment containing a secondary lithium battery)	-	0	-
Annex M-5(Risk of burn due to short-circuit during carrying)	-	0	-
Annex M-6(Safeguards against short-circuits)	-	0	-
Annex M-7(Risk of explosion from lead acid and NiCd batteries)	-	0	-
Annex M-8("Protection against internal ignition from external spark sources of rechargeable batteries with aqueous electrolyte")	-	0	-
Annex M-9(Preventing electrolyte spillage)	-	0	-
Annex O(Measurement of creepage distances and clearances)	-	0	-
Annex P-1(General-Safeguards against conductive objects)	-	0	-
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	0	-
Annex P-3(Safeguards against spillage of internal liquids)	-	0	-
Annex Q-1(Limited power source)	-	0	-
Annex Q-2(Test for external circuits – paired conductor cable)	-	0	-
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	0	-
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	0	-
Annex S-3(Flammability tests for the bottom of a fire enclosure)	-	0	-
Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W)	-	0	-
Annex T-1(General-Mechanical strength tests)	-	0	-
Annex T-2(Steady force test, 10 N)	-	0	-
Annex T-3(Steady force test, 30 N)	-	0	-
Annex T-5(Steady force test, 250 N)	-	0	-
Annex T-6(Enclosure impact test)	-	0	-
Annex T-7(Drop test)	-	0	-
Annex T-8(Stress relief test)	-	0	-
Annex T-9(Glass impact test)	-	0	-
Annex T-11(Test for telescoping or rod antennas)	-	0	-
Annex V-1(Accessible parts of equipment)	-	0	-
Annex V-2(Accessible part criterion)	-	0	-
Annex W(Comparison of terms introduced in this document)	-	0	-
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	0	-
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	0	-
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	0	-
Annex T-4(Steady force test, 100 N)	-	0	-
Cl-4.1(General- materials, components)	-	0	-
Cl-4.2(Energy source classifications)	-	0	-
Cl-4.3(Protection against energy sources)	-	0	-
Cl-4.4(Safeguards)	-	0	-
Cl-4.5(Explosion)	-	0	-
Cl-4.6(Fixing of conductors and conductive parts)	-	0	-
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	0	-
Cl-4.8(Equipment containing coin or button cell batteries)	-	0	-
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	0	-
Cl-4.10(Components requirements)	-	0	-
Cl-5.1(General- Electrically-caused injury)	-	0	-
Cl-5.2(Classification and limits of electrical energy sources)	-	0	-
Cl-5.3(Protection against electrical energy sources)	-	0	-
Cl-5.4(Insulation materials and requirements)	-	0	-
Cl-5.5(Components as safeguards)	-	0	-
Cl-5.6(Protective conductor)	-	0	-
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	0	-
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	0	-
Cl-6.1(General- Electrically-caused fire)	-	0	-
Cl-6.2(Classification of power sources and potential ignition sources)	-	0	-
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	0	-
Cl-6.4(Safeguards against fire under single fault conditions)	-	0	-
Cl-6.5(Internal and external wiring)	-	0	-
Cl-8.1(General- Mechanically-caused injury)	-	0	-
Cl-8.2(Mechanical energy source classifications)	-	0	-
Cl-8.3(Safeguards against mechanical energy sources)	-	0	-
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	0	-
Cl-8.5(Safeguards against moving parts)	-	0	-
Cl-8.6(Stability of equipment)	-	0	-
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	0	-
Cl-8.8(Handle strength)	-	0	-
Cl-8.9(Wheels or casters attachment requirements)	-	0	-
Cl-8.10(Carts, stands, and similar carriers)	-	0	-
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	0	-
Cl-9.1(General-Thermal burn injury)	-	0	-
Cl-9.2(Thermal energy source classifications)	-	0	-
Cl-9.3(Touch temperature limits)	-	0	-
Cl-9.4(Safeguards against thermal energy sources)	-	0	-
Cl-9.5(Requirements for safeguards)	-	0	-
Cl-9.6(Requirements for wireless power transmitters)	-	0	-
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	0	-
Annex B-2(Normal operating conditions)	-	0	-
Annex B-3(Simulated abnormal operating conditions)	-	0	-
Annex B-4(Simulated single fault conditions)	-	0	-
Annex D-1(Impulse test generators)	-	0	-
Annex D-2(Antenna interface test generator)	-	0	-
Annex E-1(Electrical energy source classification for audio signals)	-	0	-
Annex E-2(Audio signals used during test)	-	0	-
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	0	-
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	0	-
Annex F-2(Letter symbols and graphical symbols)	-	0	-
Annex F-3(Equipment markings)	-	0	-
Annex F-4(Instructions)	-	0	-
Annex F-5(Instructional safeguards)	-	0	-
Annex H-1(General- Criteria for telephone ringing signals)	-	0	-
Annex H-2(Method A)	-	0	-
Annex H-3(Method B)	-	0	-
Annex L-1(General requirements)	-	0	-
Annex L-2(Permanently connected equipment)	-	0	-
Annex L-3()	-	0	-
Annex L-4(Single-phase equipment)	-	0	-
Annex L-5(Three-phase equipment)	-	0	-
Annex L-6(Switches as disconnect devices)	-	0	-
Annex L-7(Plugs as disconnect devices)	-	0	-
Annex L-8(Multiple power sources)	-	0	-
Annex L-9(Compliance criteria)	-	0	-
Annex M-1(General requirements)	-	0	-
Annex M-2(Safety of batteries and their cells)	-	0	-
Annex M-3(Protection circuits for batteries provided within the equipment)	-	0	-
Annex M-4(Additional safeguards for equipment containing a secondary lithium battery)	-	0	-
Annex M-5(Risk of burn due to short-circuit during carrying)	-	0	-
Annex M-6(Safeguards against short-circuits)	-	0	-
Annex M-7(Risk of explosion from lead acid and NiCd batteries)	-	0	-
Annex M-8("Protection against internal ignition from external spark sources of rechargeable batteries with aqueous electrolyte")	-	0	-
Annex M-9(Preventing electrolyte spillage)	-	0	-
Annex O(Measurement of creepage distances and clearances)	-	0	-
Annex P-1(General-Safeguards against conductive objects)	-	0	-
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	0	-
Annex P-3(Safeguards against spillage of internal liquids)	-	0	-
Annex Q-1(Limited power source)	-	0	-
Annex Q-2(Test for external circuits – paired conductor cable)	-	0	-
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	0	-
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	0	-
Annex S-3(Flammability tests for the bottom of a fire enclosure)	-	0	-
Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W)	-	0	-
Annex T-1(General-Mechanical strength tests)	-	0	-
Annex T-2(Steady force test, 10 N)	-	0	-
Annex T-3(Steady force test, 30 N)	-	0	-
Annex T-5(Steady force test, 250 N)	-	0	-
Annex T-6(Enclosure impact test)	-	0	-
Annex T-7(Drop test)	-	0	-
Annex T-8(Stress relief test)	-	0	-
Annex T-9(Glass impact test)	-	0	-
Annex T-11(Test for telescoping or rod antennas)	-	0	-
Annex V-1(Accessible parts of equipment)	-	0	-
Annex V-2(Accessible part criterion)	-	0	-
Annex W(Comparison of terms introduced in this document)	-	0	-
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	0	-
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	0	-
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	0	-
Annex T-4(Steady force test, 100 N)	-	0	-
Cl-4.1(General- materials, components)	-	0	-
Cl-4.2(Energy source classifications)	-	0	-
Cl-4.3(Protection against energy sources)	-	0	-
Cl-4.4(Safeguards)	-	0	-
Cl-4.5(Explosion)	-	0	-
Cl-4.6(Fixing of conductors and conductive parts)	-	0	-
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	0	-
Cl-4.8(Equipment containing coin or button cell batteries)	-	0	-
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	0	-
Cl-4.10(Components requirements)	-	0	-
Cl-5.1(General- Electrically-caused injury)	-	0	-
Cl-5.2(Classification and limits of electrical energy sources)	-	0	-
Cl-5.3(Protection against electrical energy sources)	-	0	-
Cl-5.4(Insulation materials and requirements)	-	0	-
Cl-5.5(Components as safeguards)	-	0	-
Cl-5.6(Protective conductor)	-	0	-
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	0	-
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	0	-
Cl-6.1(General- Electrically-caused fire)	-	0	-
Cl-6.2(Classification of power sources and potential ignition sources)	-	0	-
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	0	-
Cl-6.4(Safeguards against fire under single fault conditions)	-	0	-
Cl-6.5(Internal and external wiring)	-	0	-
Cl-8.1(General- Mechanically-caused injury)	-	0	-
Cl-8.2(Mechanical energy source classifications)	-	0	-
Cl-8.3(Safeguards against mechanical energy sources)	-	0	-
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	0	-
Cl-8.5(Safeguards against moving parts)	-	0	-
Cl-8.6(Stability of equipment)	-	0	-
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	0	-
Cl-8.8(Handle strength)	-	0	-
Cl-8.9(Wheels or casters attachment requirements)	-	0	-
Cl-8.10(Carts, stands, and similar carriers)	-	0	-
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	0	-
Cl-9.1(General-Thermal burn injury)	-	0	-
Cl-9.2(Thermal energy source classifications)	-	0	-
Cl-9.3(Touch temperature limits)	-	0	-
Cl-9.4(Safeguards against thermal energy sources)	-	0	-
Cl-9.5(Requirements for safeguards)	-	0	-
Cl-9.6(Requirements for wireless power transmitters)	-	0	-
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	0	-
Annex B-2(Normal operating conditions)	-	0	-
Annex B-3(Simulated abnormal operating conditions)	-	0	-
Annex B-4(Simulated single fault conditions)	-	0	-
Annex D-1(Impulse test generators)	-	0	-
Annex D-2(Antenna interface test generator)	-	0	-
Annex E-1(Electrical energy source classification for audio signals)	-	0	-
Annex E-2(Audio signals used during test)	-	0	-
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	0	-
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	0	-
Annex F-2(Letter symbols and graphical symbols)	-	0	-
Annex F-3(Equipment markings)	-	0	-
Annex F-4(Instructions)	-	0	-
Annex F-5(Instructional safeguards)	-	0	-
Annex H-1(General- Criteria for telephone ringing signals)	-	0	-
Annex H-2(Method A)	-	0	-
Annex H-3(Method B)	-	0	-
Annex L-1(General requirements)	-	0	-
Annex L-2(Permanently connected equipment)	-	0	-
Annex L-3()	-	0	-
Annex L-4(Single-phase equipment)	-	0	-
Annex L-5(Three-phase equipment)	-	0	-
Annex L-6(Switches as disconnect devices)	-	0	-
Annex L-7(Plugs as disconnect devices)	-	0	-
Annex L-8(Multiple power sources)	-	0	-
Annex L-9(Compliance criteria)	-	0	-
Annex M-1(General requirements)	-	0	-
Annex M-2(Safety of batteries and their cells)	-	0	-
Annex M-3(Protection circuits for batteries provided within the equipment)	-	0	-
Annex M-4(Additional safeguards for equipment containing a secondary lithium battery)	-	0	-
Annex M-5(Risk of burn due to short-circuit during carrying)	-	0	-
Annex M-6(Safeguards against short-circuits)	-	0	-
Annex M-7(Risk of explosion from lead acid and NiCd batteries)	-	0	-
Annex M-8("Protection against internal ignition from external spark sources of rechargeable batteries with aqueous electrolyte")	-	0	-
Annex M-9(Preventing electrolyte spillage)	-	0	-
Annex O(Measurement of creepage distances and clearances)	-	0	-
Annex P-1(General-Safeguards against conductive objects)	-	0	-
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	0	-
Annex P-3(Safeguards against spillage of internal liquids)	-	0	-
Annex Q-1(Limited power source)	-	0	-
Annex Q-2(Test for external circuits – paired conductor cable)	-	0	-
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	0	-
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	0	-
Annex S-3(Flammability tests for the bottom of a fire enclosure)	-	0	-
Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W)	-	0	-
Annex T-1(General-Mechanical strength tests)	-	0	-
Annex T-2(Steady force test, 10 N)	-	0	-
Annex T-3(Steady force test, 30 N)	-	0	-
Annex T-5(Steady force test, 250 N)	-	0	-
Annex T-6(Enclosure impact test)	-	0	-
Annex T-7(Drop test)	-	0	-
Annex T-8(Stress relief test)	-	0	-
Annex T-9(Glass impact test)	-	0	-
Annex T-11(Test for telescoping or rod antennas)	-	0	-
Annex V-1(Accessible parts of equipment)	-	0	-
Annex V-2(Accessible part criterion)	-	0	-
Annex W(Comparison of terms introduced in this document)	-	0	-
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	0	-
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	0	-
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	0	-
Annex T-4(Steady force test, 100 N)	-	0	-
Annex G-4(Connectors)	-	500	10% discount offered to samples received from BIS.
Annex G-6(Wire insulation)	-	2000	10% discount offered to samples received from BIS.
Annex J-2(Type tests)	-	1000	10% discount offered to samples received from BIS.
Annex Y-6(Mechanical strength of enclosures)	-	1000	10% discount offered to samples received from BIS.
Cl-7.2(Reduction of exposure to hazardous substances)	-	0	Repeated Entry
Cl-7.3(Ozone exposure)	-	0	Repeated Entry
Cl-7.4(Use of personal safeguards or personal protective equipment (PPE)	-	0	Repeated Entry
Cl-7.5(Use of instructional safeguards and instructions)	-	0	Repeated Entry
Annex T-10(Glass fragmentation test)	-	0	-
Annex K-1(General- Safety interlocks)	-	0	-
Annex K-2(Components of the safety interlock safeguard mechanism)	-	0	-
Annex K-3(Inadvertent change of operating mode)	-	0	-
Annex K-4(Interlock safeguard override)	-	0	-
Annex K-5(Fail-safe)	-	0	-
Annex K-6(Mechanically operated safety interlocks)	-	0	-
Annex K-7(Interlock circuit isolation)	-	0	-
Annex N(Electrochemical potentials (V))	-	0	-
Annex P-4(Metallized coatings and adhesives securing parts)	-	0	-
Cl-4.1(General- materials, components)	-	0	-
Cl-4.2(Energy source classifications)	-	0	-
Cl-4.3(Protection against energy sources)	-	0	-
Cl-4.4(Safeguards)	-	0	-
Cl-4.5(Explosion)	-	0	-
Cl-4.6(Fixing of conductors and conductive parts)	-	0	-
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	0	-
Cl-4.8(Equipment containing coin or button cell batteries)	-	0	-
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	0	-
Cl-4.10(Components requirements)	-	0	-
Cl-5.1(General- Electrically-caused injury)	-	0	-
Cl-5.2(Classification and limits of electrical energy sources)	-	0	-
Cl-5.3(Protection against electrical energy sources)	-	0	-
Cl-5.4(Insulation materials and requirements)	-	0	-
Cl-5.5(Components as safeguards)	-	0	-
Cl-5.6(Protective conductor)	-	0	-
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	0	-
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	0	-
Cl-6.1(General- Electrically-caused fire)	-	0	-
Cl-6.2(Classification of power sources and potential ignition sources)	-	0	-
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	0	-
Cl-6.4(Safeguards against fire under single fault conditions)	-	0	-
Cl-6.5(Internal and external wiring)	-	0	-
Cl-8.1(General- Mechanically-caused injury)	-	0	-
Cl-8.2(Mechanical energy source classifications)	-	0	-
Cl-8.3(Safeguards against mechanical energy sources)	-	0	-
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	0	-
Cl-8.5(Safeguards against moving parts)	-	0	-
Cl-8.6(Stability of equipment)	-	0	-
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	0	-
Cl-8.8(Handle strength)	-	0	-
Cl-8.9(Wheels or casters attachment requirements)	-	0	-
Cl-8.10(Carts, stands, and similar carriers)	-	0	-
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	0	-
Cl-9.1(General-Thermal burn injury)	-	0	-
Cl-9.2(Thermal energy source classifications)	-	0	-
Cl-9.3(Touch temperature limits)	-	0	-
Cl-9.4(Safeguards against thermal energy sources)	-	0	-
Cl-9.5(Requirements for safeguards)	-	0	-
Cl-9.6(Requirements for wireless power transmitters)	-	0	-
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	0	-
Annex B-2(Normal operating conditions)	-	0	-
Annex B-3(Simulated abnormal operating conditions)	-	0	-
Annex B-4(Simulated single fault conditions)	-	0	-
Annex D-1(Impulse test generators)	-	0	-
Annex D-2(Antenna interface test generator)	-	0	-
Annex E-1(Electrical energy source classification for audio signals)	-	0	-
Annex E-2(Audio signals used during test)	-	0	-
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	0	-
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	0	-
Annex F-2(Letter symbols and graphical symbols)	-	0	-
Annex F-3(Equipment markings)	-	0	-
Annex F-4(Instructions)	-	0	-
Annex F-5(Instructional safeguards)	-	0	-
Annex H-1(General- Criteria for telephone ringing signals)	-	0	-
Annex H-2(Method A)	-	0	-
Annex H-3(Method B)	-	0	-
Annex L-1(General requirements)	-	0	-
Annex L-2(Permanently connected equipment)	-	0	-
Annex L-3()	-	0	-
Annex L-4(Single-phase equipment)	-	0	-
Annex L-5(Three-phase equipment)	-	0	-
Annex L-6(Switches as disconnect devices)	-	0	-
Annex L-7(Plugs as disconnect devices)	-	0	-
Annex L-8(Multiple power sources)	-	0	-
Annex L-9(Compliance criteria)	-	0	-
Annex M-1(General requirements)	-	0	-
Annex M-2(Safety of batteries and their cells)	-	0	-
Annex M-3(Protection circuits for batteries provided within the equipment)	-	0	-
Annex M-4(Additional safeguards for equipment containing a secondary lithium battery)	-	0	-
Annex M-5(Risk of burn due to short-circuit during carrying)	-	0	-
Annex M-6(Safeguards against short-circuits)	-	0	-
Annex M-7(Risk of explosion from lead acid and NiCd batteries)	-	0	-
Annex M-8("Protection against internal ignition from external spark sources of rechargeable batteries with aqueous electrolyte")	-	0	-
Annex M-9(Preventing electrolyte spillage)	-	0	-
Annex O(Measurement of creepage distances and clearances)	-	0	-
Annex P-1(General-Safeguards against conductive objects)	-	0	-
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	0	-
Annex P-3(Safeguards against spillage of internal liquids)	-	0	-
Annex Q-1(Limited power source)	-	0	-
Annex Q-2(Test for external circuits – paired conductor cable)	-	0	-
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	0	-
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	0	-
Annex S-3(Flammability tests for the bottom of a fire enclosure)	-	0	-
Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W)	-	0	-
Annex T-1(General-Mechanical strength tests)	-	0	-
Annex T-2(Steady force test, 10 N)	-	0	-
Annex T-3(Steady force test, 30 N)	-	0	-
Annex T-5(Steady force test, 250 N)	-	0	-
Annex T-6(Enclosure impact test)	-	0	-
Annex T-7(Drop test)	-	0	-
Annex T-8(Stress relief test)	-	0	-
Annex T-9(Glass impact test)	-	0	-
Annex T-11(Test for telescoping or rod antennas)	-	0	-
Annex V-1(Accessible parts of equipment)	-	0	-
Annex V-2(Accessible part criterion)	-	0	-
Annex W(Comparison of terms introduced in this document)	-	0	-
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	0	-
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	0	-
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	0	-
Annex T-4(Steady force test, 100 N)	-	0	-
Annex G-4(Connectors)	-	0	-
Annex G-6(Wire insulation)	-	0	-
Annex J-2(Type tests)	-	0	-
Annex Y-6(Mechanical strength of enclosures)	-	0	-
Cl-7.2(Reduction of exposure to hazardous substances)	-	0	-
Cl-7.3(Ozone exposure)	-	0	-
Cl-7.4(Use of personal safeguards or personal protective equipment (PPE)	-	0	-
Cl-7.5(Use of instructional safeguards and instructions)	-	0	-
Annex T-10(Glass fragmentation test)	-	0	-
Annex K-1(General- Safety interlocks)	-	0	-
Annex K-2(Components of the safety interlock safeguard mechanism)	-	0	-
Annex K-3(Inadvertent change of operating mode)	-	0	-
Annex K-4(Interlock safeguard override)	-	0	-
Annex K-5(Fail-safe)	-	0	-
Annex K-6(Mechanically operated safety interlocks)	-	0	-
Annex K-7(Interlock circuit isolation)	-	0	-
Annex N(Electrochemical potentials (V))	-	0	-
Annex P-4(Metallized coatings and adhesives securing parts)	-	0	-
Cl-4.1(General- materials, components)	-	0	-
Cl-4.2(Energy source classifications)	-	0	-
Cl-4.3(Protection against energy sources)	-	0	-
Cl-4.4(Safeguards)	-	0	-
Cl-4.5(Explosion)	-	0	-
Cl-4.6(Fixing of conductors and conductive parts)	-	0	-
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	0	-
Cl-4.8(Equipment containing coin or button cell batteries)	-	0	-
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	0	-
Cl-4.10(Components requirements)	-	0	-
Cl-5.1(General- Electrically-caused injury)	-	0	-
Cl-5.2(Classification and limits of electrical energy sources)	-	0	-
Cl-5.3(Protection against electrical energy sources)	-	0	-
Cl-5.4(Insulation materials and requirements)	-	0	-
Cl-5.5(Components as safeguards)	-	0	-
Cl-5.6(Protective conductor)	-	0	-
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	0	-
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	0	-
Cl-6.1(General- Electrically-caused fire)	-	0	-
Cl-6.2(Classification of power sources and potential ignition sources)	-	0	-
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	0	-
Cl-6.4(Safeguards against fire under single fault conditions)	-	0	-
Cl-6.5(Internal and external wiring)	-	0	-
Cl-8.1(General- Mechanically-caused injury)	-	0	-
Cl-8.2(Mechanical energy source classifications)	-	0	-
Cl-8.3(Safeguards against mechanical energy sources)	-	0	-
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	0	-
Cl-8.5(Safeguards against moving parts)	-	0	-
Cl-8.6(Stability of equipment)	-	0	-
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	0	-
Cl-8.8(Handle strength)	-	0	-
Cl-8.9(Wheels or casters attachment requirements)	-	0	-
Cl-8.10(Carts, stands, and similar carriers)	-	0	-
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	0	-
Cl-9.1(General-Thermal burn injury)	-	0	-
Cl-9.2(Thermal energy source classifications)	-	0	-
Cl-9.3(Touch temperature limits)	-	0	-
Cl-9.4(Safeguards against thermal energy sources)	-	0	-
Cl-9.5(Requirements for safeguards)	-	0	-
Cl-9.6(Requirements for wireless power transmitters)	-	0	-
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	0	-
Annex B-2(Normal operating conditions)	-	0	-
Annex B-3(Simulated abnormal operating conditions)	-	0	-
Annex B-4(Simulated single fault conditions)	-	0	-
Annex D-1(Impulse test generators)	-	0	-
Annex D-2(Antenna interface test generator)	-	0	-
Annex E-1(Electrical energy source classification for audio signals)	-	0	-
Annex E-2(Audio signals used during test)	-	0	-
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	0	-
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	0	-
Annex F-2(Letter symbols and graphical symbols)	-	0	-
Annex F-3(Equipment markings)	-	0	-
Annex F-4(Instructions)	-	0	-
Annex F-5(Instructional safeguards)	-	0	-
Annex H-1(General- Criteria for telephone ringing signals)	-	0	-
Annex H-2(Method A)	-	0	-
Annex H-3(Method B)	-	0	-
Annex L-1(General requirements)	-	0	-
Annex L-2(Permanently connected equipment)	-	0	-
Annex L-3()	-	0	-
Annex L-4(Single-phase equipment)	-	0	-
Annex L-5(Three-phase equipment)	-	0	-
Annex L-6(Switches as disconnect devices)	-	0	-
Annex L-7(Plugs as disconnect devices)	-	0	-
Annex L-8(Multiple power sources)	-	0	-
Annex L-9(Compliance criteria)	-	0	-
Annex M-1(General requirements)	-	0	-
Annex M-2(Safety of batteries and their cells)	-	0	-
Annex M-3(Protection circuits for batteries provided within the equipment)	-	0	-
Annex M-4(Additional safeguards for equipment containing a secondary lithium battery)	-	0	-
Annex M-5(Risk of burn due to short-circuit during carrying)	-	0	-
Annex M-6(Safeguards against short-circuits)	-	0	-
Annex M-7(Risk of explosion from lead acid and NiCd batteries)	-	0	-
Annex M-8("Protection against internal ignition from external spark sources of rechargeable batteries with aqueous electrolyte")	-	0	-
Annex M-9(Preventing electrolyte spillage)	-	0	-
Annex O(Measurement of creepage distances and clearances)	-	0	-
Annex P-1(General-Safeguards against conductive objects)	-	0	-
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	0	-
Annex P-3(Safeguards against spillage of internal liquids)	-	0	-
Annex Q-1(Limited power source)	-	0	-
Annex Q-2(Test for external circuits – paired conductor cable)	-	0	-
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	0	-
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	0	-
Annex S-3(Flammability tests for the bottom of a fire enclosure)	-	0	-
Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W)	-	0	-
Annex T-1(General-Mechanical strength tests)	-	0	-
Annex T-2(Steady force test, 10 N)	-	0	-
Annex T-3(Steady force test, 30 N)	-	0	-
Annex T-5(Steady force test, 250 N)	-	0	-
Annex T-6(Enclosure impact test)	-	0	-
Annex T-7(Drop test)	-	0	-
Annex T-8(Stress relief test)	-	0	-
Annex T-9(Glass impact test)	-	0	-
Annex T-11(Test for telescoping or rod antennas)	-	0	-
Annex V-1(Accessible parts of equipment)	-	0	-
Annex V-2(Accessible part criterion)	-	0	-
Annex W(Comparison of terms introduced in this document)	-	0	-
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	0	-
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	0	-
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	0	-
Annex T-4(Steady force test, 100 N)	-	0	-
Annex G-4(Connectors)	-	0	-
Annex G-6(Wire insulation)	-	0	-
Annex J-2(Type tests)	-	0	-
Annex Y-6(Mechanical strength of enclosures)	-	0	-
Cl-7.2(Reduction of exposure to hazardous substances)	-	0	-
Cl-7.3(Ozone exposure)	-	0	-
Cl-7.4(Use of personal safeguards or personal protective equipment (PPE)	-	0	-
Cl-7.5(Use of instructional safeguards and instructions)	-	0	-
Annex T-10(Glass fragmentation test)	-	0	-
Annex K-1(General- Safety interlocks)	-	0	-
Annex K-2(Components of the safety interlock safeguard mechanism)	-	0	-
Annex K-3(Inadvertent change of operating mode)	-	0	-
Annex K-4(Interlock safeguard override)	-	0	-
Annex K-5(Fail-safe)	-	0	-
Annex K-6(Mechanically operated safety interlocks)	-	0	-
Annex K-7(Interlock circuit isolation)	-	0	-
Annex N(Electrochemical potentials (V))	-	0	-
Annex P-4(Metallized coatings and adhesives securing parts)	-	0	-
Cl-4.1(General- materials, components)	-	0	-
Cl-4.2(Energy source classifications)	-	0	-
Cl-4.3(Protection against energy sources)	-	0	-
Cl-4.4(Safeguards)	-	0	-
Cl-4.5(Explosion)	-	0	-
Cl-4.6(Fixing of conductors and conductive parts)	-	0	-
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	0	-
Cl-4.8(Equipment containing coin or button cell batteries)	-	0	-
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	0	-
Cl-4.10(Components requirements)	-	0	-
Cl-5.1(General- Electrically-caused injury)	-	0	-
Cl-5.2(Classification and limits of electrical energy sources)	-	0	-
Cl-5.3(Protection against electrical energy sources)	-	0	-
Cl-5.4(Insulation materials and requirements)	-	0	-
Cl-5.5(Components as safeguards)	-	0	-
Cl-5.6(Protective conductor)	-	0	-
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	0	-
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	0	-
Cl-6.1(General- Electrically-caused fire)	-	0	-
Cl-6.2(Classification of power sources and potential ignition sources)	-	0	-
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	0	-
Cl-6.4(Safeguards against fire under single fault conditions)	-	0	-
Cl-6.5(Internal and external wiring)	-	0	-
Cl-8.1(General- Mechanically-caused injury)	-	0	-
Cl-8.2(Mechanical energy source classifications)	-	0	-
Cl-8.3(Safeguards against mechanical energy sources)	-	0	-
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	0	-
Cl-8.5(Safeguards against moving parts)	-	0	-
Cl-8.6(Stability of equipment)	-	0	-
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	0	-
Cl-8.8(Handle strength)	-	0	-
Cl-8.9(Wheels or casters attachment requirements)	-	0	-
Cl-8.10(Carts, stands, and similar carriers)	-	0	-
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	0	-
Cl-9.1(General-Thermal burn injury)	-	0	-
Cl-9.2(Thermal energy source classifications)	-	0	-
Cl-9.3(Touch temperature limits)	-	0	-
Cl-9.4(Safeguards against thermal energy sources)	-	0	-
Cl-9.5(Requirements for safeguards)	-	0	-
Cl-9.6(Requirements for wireless power transmitters)	-	0	-
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	0	-
Annex B-2(Normal operating conditions)	-	0	-
Annex B-3(Simulated abnormal operating conditions)	-	0	-
Annex B-4(Simulated single fault conditions)	-	0	-
Annex D-1(Impulse test generators)	-	0	-
Annex D-2(Antenna interface test generator)	-	0	-
Annex E-1(Electrical energy source classification for audio signals)	-	0	-
Annex E-2(Audio signals used during test)	-	0	-
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	0	-
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	0	-
Annex F-2(Letter symbols and graphical symbols)	-	0	-
Annex F-3(Equipment markings)	-	0	-
Annex F-4(Instructions)	-	0	-
Annex F-5(Instructional safeguards)	-	0	-
Annex H-1(General- Criteria for telephone ringing signals)	-	0	-
Annex H-2(Method A)	-	0	-
Annex H-3(Method B)	-	0	-
Annex L-1(General requirements)	-	0	-
Annex L-2(Permanently connected equipment)	-	0	-
Annex L-3()	-	0	-
Annex L-4(Single-phase equipment)	-	0	-
Annex L-5(Three-phase equipment)	-	0	-
Annex L-6(Switches as disconnect devices)	-	0	-
Annex L-7(Plugs as disconnect devices)	-	0	-
Annex L-8(Multiple power sources)	-	0	-
Annex L-9(Compliance criteria)	-	0	-
Annex M-1(General requirements)	-	0	-
Annex M-2(Safety of batteries and their cells)	-	0	-
Annex M-3(Protection circuits for batteries provided within the equipment)	-	0	-
Annex M-4(Additional safeguards for equipment containing a secondary lithium battery)	-	0	-
Annex M-5(Risk of burn due to short-circuit during carrying)	-	0	-
Annex M-6(Safeguards against short-circuits)	-	0	-
Annex M-7(Risk of explosion from lead acid and NiCd batteries)	-	0	-
Annex M-8("Protection against internal ignition from external spark sources of rechargeable batteries with aqueous electrolyte")	-	0	-
Annex M-9(Preventing electrolyte spillage)	-	0	-
Annex O(Measurement of creepage distances and clearances)	-	0	-
Annex P-1(General-Safeguards against conductive objects)	-	0	-
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	0	-
Annex P-3(Safeguards against spillage of internal liquids)	-	0	-
Annex Q-1(Limited power source)	-	0	-
Annex Q-2(Test for external circuits – paired conductor cable)	-	0	-
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	0	-
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	0	-
Annex S-3(Flammability tests for the bottom of a fire enclosure)	-	0	-
Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W)	-	0	-
Annex T-1(General-Mechanical strength tests)	-	0	-
Annex T-2(Steady force test, 10 N)	-	0	-
Annex T-3(Steady force test, 30 N)	-	0	-
Annex T-5(Steady force test, 250 N)	-	0	-
Annex T-6(Enclosure impact test)	-	0	-
Annex T-7(Drop test)	-	0	-
Annex T-8(Stress relief test)	-	0	-
Annex T-9(Glass impact test)	-	0	-
Annex T-11(Test for telescoping or rod antennas)	-	0	-
Annex V-1(Accessible parts of equipment)	-	0	-
Annex V-2(Accessible part criterion)	-	0	-
Annex W(Comparison of terms introduced in this document)	-	0	-
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	0	-
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	0	-
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	0	-
Annex T-4(Steady force test, 100 N)	-	0	-
Annex G-4(Connectors)	-	0	-
Annex G-6(Wire insulation)	-	0	-
Annex J-2(Type tests)	-	0	-
Annex Y-6(Mechanical strength of enclosures)	-	0	-
Cl-7.2(Reduction of exposure to hazardous substances)	-	0	-
Cl-7.3(Ozone exposure)	-	0	-
Cl-7.4(Use of personal safeguards or personal protective equipment (PPE)	-	0	-
Cl-7.5(Use of instructional safeguards and instructions)	-	0	-
Annex T-10(Glass fragmentation test)	-	0	-
Annex K-1(General- Safety interlocks)	-	0	-
Annex K-2(Components of the safety interlock safeguard mechanism)	-	0	-
Annex K-3(Inadvertent change of operating mode)	-	0	-
Annex K-4(Interlock safeguard override)	-	0	-
Annex K-5(Fail-safe)	-	0	-
Annex K-6(Mechanically operated safety interlocks)	-	0	-
Annex K-7(Interlock circuit isolation)	-	0	-
Annex N(Electrochemical potentials (V))	-	0	-
Annex P-4(Metallized coatings and adhesives securing parts)	-	0	-
Annex D-3(Electronic pulse generator)	-	0	-
Annex G-1(Switches)	-	0	-
Annex G-2(Relays)	-	0	-
Annex G-3(Protective devices)	-	0	-
Annex G-5(Wound components)	-	0	-
Annex G-7(Mains power supply cords and interconnection cables)	-	0	-
Annex G-8(Varistors)	-	0	-
Annex G-9(Integrated circuit (IC) current limiters)	-	0	-
Annex G-10(Resistors)	-	0	-
Annex G-11(Capacitors and RC units)	-	0	-
Annex G-12(Optocouplers)	-	0	-
Annex G-13(Printed boards)	-	0	-
Annex G-14(Coatings on component terminals)	-	0	-
Annex G-15(Pressurized liquid filled components or LFC assemblies)	-	0	-
Annex G-16(IC that includes a capacitor discharge function (ICX))	-	0	-
Annex J-1(General-Insulated winding wires for use without interleaved insulation)	-	0	-
Annex J-3(Testing during manufacturing)	-	0	-
Annex M-10(Instructions to prevent reasonably foreseeable misuse)	-	0	-
Annex S-4(Flammability classification of materials)	-	0	-
Annex S-6(Grille covering material, cloth, and reticulated foam)	-	0	-
Annex Y-2(Resistance to UV radiation)	-	0	-
Annex Y-3(Resistance to corrosion)	-	0	-
Annex A(Examples of equipment within the scope of this document)	-	0	-
Cl-7.1(General- Injury caused by hazardous substances)	-	0	-
Annex Y-4(Gaskets)	-	0	-
Annex R(Limited short-circuit test)	-	0	-
Annex I(Overvoltage categories (see IEC 60364-4-44))	-	0	-

27 Apr, 2029

-
Included w.e.f 13.10.2025 Exclusion: Annex U ("Mechanical strength of CRTs and protection against the effects of implosion"), Cl-10.1 (General-Radiation), Cl-10.2 (Radiation energy source classifications), Cl-10.3 (Safeguards against laser radiation), Cl-10.4 ("Safeguards against optical radiation from lamps and lamp systems (including LED types)"), Cl-10.5 (Safeguards against X-radiation), Cl-10.6 (Safeguards against acoustic energy sources), Annex C-1 (Protection of materials in equipment from UV radiation), Annex C-2 (UV light conditioning test)

3911

INDIAN TESTING LABORATORY PRIVATE LIMITED, GREATER NOIDA

8171306

IS 21 (2025)

Wrought Aluminium and Aluminium Alloys for Manufacture of Utensils - Specification (Fifth Revision)

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General requirements)	-	5000	-
Cl-5.1(Material)	-	5000	-
Cl-5.2(Chemical composition and mechanical properties of grades in Cl 5.1)	-	5000	-
Cl-5.3.1 a("Wrought Aluminium (with Minimum 99 Percent Al Content)- Iron+ Silicon")	-	2000	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Chromium")	-	1000	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Magnesium")	-	1000	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Manganese")	-	1000	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Nickel")	-	1000	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Zinc")	-	1000	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Titanium")	-	1000	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Tin")	-	1000	-
Cl-5.3.1 c("Wrought Aluminium (with Minimum 99 Percent Al Content)- Copper")	-	1000	-
Cl-5.3.1 Note 1("Wrought Aluminium (with Minimum 99 Percent Al Content)- Aluminium")	-	1000	-
Cl-5.3.1 d("Wrought Aluminium (with Minimum 99 Percent Al Content)- Others")	-	3000	-
Cl-5.3.2, Table-1 (i)(Wrought Aluminium Alloys-Silicon)	-	1000	-
Cl-5.3.2, Table-1 (ii)(Wrought Aluminium Alloys-Iron)	-	1000	-
Cl-5.3.2, Table-1 (iii)(Wrought Aluminium Alloys-Copper)	-	1000	-
Cl-5.3.2, Table-1 (iv)(Wrought Aluminium Alloys-Manganese)	-	1000	-
Cl-5.3.2, Table-1 (v)(Wrought Aluminium Alloys-Magnesium)	-	1000	-
Cl-5.3.2, Table-1 (vi)(Wrought Aluminium Alloys-Chromium)	-	1000	-
Cl-5.3.2, Table-1 (vii)(Wrought Aluminium Alloys-Nickel)	-	1000	-
Cl-5.3.2, Table-1 (viii)(Wrought Aluminium Alloys-Zinc)	-	1000	-
Cl-5.3.2, Table-1 (ix)(Wrought Aluminium Alloys -Zirconium)	-	1000	-
Cl-5.3.2, Table-1 (x)(Wrought Aluminium Alloys - Titanium)	-	1000	-
Cl-5.3.2, Table-1 (Note 3)(Wrought Aluminium Alloys- Aluminium)	-	1000	-
Cl-5.3.2, Table-1 (xi)(Wrought Aluminium Alloys- Others)	-	3000	-
Cl 5.4(Lead)	-	1000	-
Cl 5.4(Cadmium)	-	1000	-
Cl 5.4(Arsenic)	-	1000	-
Cl-7(Dimension)	-	2000	-
Cl-8(EARING TEST (OPTIONAL TEST))	-	2000	-

15 Aug, 2028

-
Included w.e.f.22.07.2025

3912

Sleen India Biz venture Private Limited, Agra

9139736

IS 17988 (2022)

CHLORINATED POLYVINYL CHLORIDE CPVC RESIN SPECIFICATION

Grade 1,Grade 2 and Grade 3

25500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Grades)	-	500	-
5.1(Basic Resin)	-	2000	-
5.2 Table - 1 (i)(K Value for PVC resin, Min)	-	2000	-
5.2 Table - 1 (ii)(Inherent Viscosity, Min)	-	2000	-
5.2 Table - 1 (iii)(Sieve Analysis, material retained on 250- micron sieve, percent by weight, Max)	-	1500	-
5.2 Table - 1 (iv)(Average Particle Size, micron)	-	1500	-
5.2 Table - 1 (v)(Apparent density, g/ml)	-	1500	-
5.2 Table - 1 (vi)(Dry Flow of 140 g, sec, Max)	-	1000	-
5.2 Table - 1 (vii)(Volatile Matter, percent, Max)	-	1000	-
5.2 Table - 1 (viii)(Chlorine Content, percent, Min)	-	3000	-
5.2 Table - 1 (ix)(RVCM Content, ppm, Max)	-	4500	-
5.2 Table - 1 (x)(Foreign Matter, Max)	-	1000	-
6(SPECIAL REQUIREMENTS OF POLYMER USED FOR MOULDING)	-	3750	-
7(Packing and Marking)	-	250	-

-
Included w.e.f. 28.07.2025

3913

Accumetrix Testing Solutions Pvt. Ltd.

9188436

IS 15658 (2021)

Concrete Paving Blocks - Specification ( First Revision )

15500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 7.2, Table No. 2, SI No. (i) (Width, W)	-	500	4000 for complete dimensions test.
Clause 7.2, Table No. 2, SI No. (ii) (Length, L)	-	500	4000 for complete dimensions test.
Clause 7.2, Table No. 2, SI No. (iii) (Thickness, Th)	-	500	4000 for complete dimensions test.
Clause 7.2, Table No. 2, SI No. (iv) (Aspect Ratio, L/Th)	-	500	4000 for complete dimensions test.
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Width)	-	500	4000 for complete dimensions test.
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Depth)	-	500	4000 for complete dimensions test.
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Thickness of wearing Layer)	-	400	4000 for complete dimensions test.
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Plan Area (Asp))	-	400	4000 for complete dimensions test.
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Ratio of wearing face area and Plan area (Asw/Asp))	-	400	4000 for complete dimensions test.
Clause 7.2 & 9.1.3, Table 2, SI No. (ix)(Deviation from squareness)	-	400	4000 for complete dimensions test.
Clause 7.3 & 9.1.4, Table 3, SI No. (i) b)(Water absorption (Average of three test specimens))	-	750	750 for water absorption test
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) a)(Indivdual Compressive strength (i))	-	1600	1600 for Compressive strength test
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) ii)(Dry Abrasion resistance (Average of three test specimens))	-	1200	1200 for dry abrasion strength
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) ii)(Wet Abrasion resistance (Average of three test specimens))	-	1200	1200 for wet abrasion strength
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) b)(Average Tensile splitting strength )	-	2400	2400 for Tensile Splitting Strength/Failure load per unit length test.
Clause 7.3 & 9.1.4, Table 3, SI No. (v) b)(Average Flexural strength )	-	4800	4800 for Flexural Strength/Breaking Load Test.
Clause 7.3, Annex G(Individual Breaking Load)	-	4800	4800 for Flexural Strength/Breaking Load Test.
Clause 7.3, Annex F(Individual Failure Load per unit Length)	-	2400	2400 for Tensile Splitting Strength/Failure load per unit length test.
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength (i))	-	4800	4800 for Flexural Strength/Breaking Load Test.
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength (i))	-	2400	2400 for Tensile Splitting Strength/Failure load per unit length test.
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) i)( Indivdual Wet Abrasion Resistance )	-	1200	1200 for wet abrasion strength
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) i)( Indivdual Dry Abrasion Resistance )	-	1200	1200 for Dry abrasion strength
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Compressive strength (Average of eight test specimens))	-	1600	1600 for Compressive strength test
Clause 7.3 & 9.1.4, Table 3, SI No. (i) a)( Indivdual Water absorption)	-	750	750 for water absorption test
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Indivdual Ratio of wearing face area and Plan area (Asw/Asp))	-	400	4000 for complete dimensions test.
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Indivdual Plan Area (Asp))	-	400	4000 for complete dimensions test.
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Indivdual Thickness of wearing Layer)	-	400	4000 for complete dimensions test.
Clause 7.3, Annex G(Average Breaking Load)	-	4800	4800 for Flexural Strength/Breaking Load Test.
Clause 7.3, Annex F(Average Failure Load per unit Length)	-	2400	2400 for Tensile Splitting Strength/Failure load per unit length test.
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Depth)	-	500	4000 for complete dimensions test.
Clause 7.2, Table No. 2, SI No. (iv) (Indivdual Aspect Ratio, L/Th)	-	400	4000 for complete dimensions test.
Clause 7.2, Table No. 2, SI No. (iii) (Indivdual Thickness, Th)	-	500	4000 for complete dimensions test.
Clause 7.2, Table No. 2, SI No. (i) (Indivdual Width, W)	-	500	4000 for complete dimensions test.
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Width)	-	500	4000 for complete dimensions test.
Clause 7.2, Table No. 2, SI No. (ii) (Indivdual Length, L)	-	500	4000 for complete dimensions test.
Clause 7.1.3 (Colour and Texture)	-	100	-
Clauses 7.1.2 & 9.1.2 (Visual Inspection)	-	100	-
Clause 7.1.1 (General Quality)	-	100	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Lower)	-	500	4000 for complete dimensions test.
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Lower)	-	500	4000 for complete dimensions test.
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Higher)	-	500	4000 for complete dimensions test.
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Higher)	-	500	4000 for complete dimensions test.
Clause 3.20(Spacer nibs)	-	500	4000 for complete dimensions test.
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Indivdual Compressive strength (ii))	-	1600	1600 for Compressive Strength Test.
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Indivdual Compressive strength - (iii))	-	1600	1600 for Compressive Strength Test.
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Indivdual Compressive strength -(iv))	-	1600	1600 for Compressive Strength Test.
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Indivdual Compressive strength - (v))	-	1600	1600 for Compressive Strength Test.
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength (ii))	-	4800	4800 for Flexural Strength/Breaking Load Test.
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength (iii))	-	4800	4800 for Flexural Strength/Breaking Load Test.
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength (ii))	-	2400	2400 for Tensile Splitting Strength/Failure load per unit length test.
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength (iii))	-	2400	2400 for Tensile Splitting Strength/Failure load per unit length test.

19 Sep, 2028

-
Exclusion: Freeze Thaw durability

3914

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 1254 (2025)

Corrugated Aluminium Sheet (Fifth Revision)

All Size

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(FREEDOM FROM DEFECTS)	-	1500	-
Cl-5(SUPPLY OF MATERIALS)	-	0	-
Cl-6(PROFILE)	-	0	-
Cl-7(MATERIAL)	-	0	If raw material is to be tested separate specimen to be sent to lab as per BIS Product Manual. (22500)
Cl-8.1(Tolerance on the thickness)	-	1500	-
Cl-8.2(Width)	-	1500	-
Cl-8.3(Length)	-	1500	-
Cl-8.4(Squareness)	-	2500	-
Cl-8.5(Depth and Pitch of the Corrugation)	-	2500	-
Cl-10(Finish)	-	1500	-
Cl-12(Marking)	-	0	-
Cl-4(FREEDOM FROM DEFECTS)	-	0	-
Cl-5(SUPPLY OF MATERIALS)	-	0	-
Cl-6(PROFILE)	-	0	-
Cl-7(MATERIAL)	-	0	-
Cl-8.1(Tolerance on the thickness)	-	0	-
Cl-8.2(Width)	-	0	-
Cl-8.3(Length)	-	0	-
Cl-8.4(Squareness)	-	0	-
Cl-8.5(Depth and Pitch of the Corrugation)	-	0	-
Cl-10(Finish)	-	0	-
Cl-12(Marking)	-	0	-

-
Included w.e.f 16.09.2025

3915

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 444 (2025)

Rubber Hoses, Textile-Reinforced, for General-Purpose Water Applications - Specification (Sixth Revision)

All

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(Material and Construction)	-	1000	-
Cl-6.1(Internal diameters and tolerances)	-	200	-
Cl-6.2(Concentricity)	-	200	-
Cl-6.3(Tolerance of length)	-	200	-
Cl-6.4(Minimum thickness of lining and cover)	-	300	-
Cl-7.1, Table-2 (i)(Minimum tensile strength)	-	1000	-
Cl-7.1, Table-2 (ii)(Minimum elongation at break)	-	1000	-
Cl-7.1, Table-2 (iii)("Resistance to ageing: Change in tensile strength from original value (max) . Change in elongation at break from original value (max)")	-	1500	-
Cl-7.2, Table-3 (i)(Proof pressure at 23 0 C)	-	2500	-
Cl-7.2, Table-3 (ii)(Change in length at proof pressure)	-	2500	-
Cl-7.2, Table-3 (iii)(Minimum burst pressure)	-	2500	-
Cl-7.2, Table-3 (iv)(Adhesion between component)	-	1000	-
Cl-7.2, Table-3 (v)(Ozone resistance)	-	3000	-
Cl-7.2, Table-3 (vi)(Flexibility at 23ºC)	-	1000	-
Cl-7.2, Table-3 (vii)(Low-temperature flexibility)	-	1000	-
Cl-8(Marking)	-	500	-
Cl-5(Material and Construction)	-	1000	-
Cl-6.1(Internal diameters and tolerances)	-	200	-
Cl-6.2(Concentricity)	-	200	-
Cl-6.3(Tolerance of length)	-	200	-
Cl-6.4(Minimum thickness of lining and cover)	-	300	-
Cl-7.1, Table-2 (i)(Minimum tensile strength)	-	1000	-
Cl-7.1, Table-2 (ii)(Minimum elongation at break)	-	1000	-
Cl-7.1, Table-2 (iii)("Resistance to ageing: Change in tensile strength from original value (max) . Change in elongation at break from original value (max)")	-	1500	-
Cl-7.2, Table-3 (i)(Proof pressure at 23 0 C)	-	1500	-
Cl-7.2, Table-3 (ii)(Change in length at proof pressure)	-	2500	-
Cl-7.2, Table-3 (iii)(Minimum burst pressure)	-	2500	-
Cl-7.2, Table-3 (iv)(Adhesion between component)	-	1000	-
Cl-7.2, Table-3 (v)(Ozone resistance)	-	3000	-
Cl-7.2, Table-3 (vi)(Flexibility at 23ºC)	-	1000	-
Cl-7.2, Table-3 (vii)(Low-temperature flexibility)	-	1000	-
Cl-8(Marking)	-	500	-

10 Mar, 2027

-
Included w.e.f. 22.09.2025

3916

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 1363 : Part 1 (2023)

Hexagon head bolts, screws and nuts of product grade C Part 1 Hexagon head bolts (Size range M5 to M64) (sixth revision)

Up to M33 Size

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Dimensions)	-	3500	-
5 - Table 5 (i)(General requirements)	-	2500	-
5 - Table 5 (ii)(Thread)	-	1000	-
5 - Table 5 (iii)(Mechanical properties)	-	2500	-
5 - Table 5 (iv)(Tolerances)	-	1000	-
5 - Table 5 (v)(Surface condition)	-	1500	-
5 - Table 5 (vi)(Surface integrity)	-	1000	-
5 - Table 5 (vii)(Acceptability)	-	1000	-
6(Marking and labelling)	-	500	-
7(Designation)	-	500	-
4(Dimensions)	-	0	-
5 - Table 5 (i)(General requirements)	-	0	-
5 - Table 5 (ii)(Thread)	-	0	-
5 - Table 5 (iii)(Mechanical properties)	-	0	-
5 - Table 5 (iv)(Tolerances)	-	0	-
5 - Table 5 (v)(Surface condition)	-	0	-
5 - Table 5 (vi)(Surface integrity)	-	0	-
5 - Table 5 (vii)(Acceptability)	-	0	-
6(Marking and labelling)	-	0	-
7(Designation)	-	0	-

-
Included w.e.f. 18.08.2025

3917

EMC Testing and Compliance LLP, Gurugram

8141526

IS 302 : Part 2 : Sec 201 (2008)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 201 electric immersion water heaters (First Revision)

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 of IS 302-‐2-‐201:2008(Classification)	-	2000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	2000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	2000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	2000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	2000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	2000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	2000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	2000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	2000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	2000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	2000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	2000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	2000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	2000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	2000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	2000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	2000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	2000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	2000	-
Cl.8 of IS 302‐2-201: 2008(Protection Against Access to Live Parts)	-	2000	-
Cl.10 of IS 302‐2‐201:2008(Power Input and Current )	-	2000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	2000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	2000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	2000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	2000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	2000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	2000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	2000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	2000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	2000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	2000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	2000	-
Cl.13 of IS 302-2-201: 2008(Leakage Current & Electric Strength at Operating Temperature)	-	2000	-
Cl.14 of IS 302‐2-201:2008(Transient Over Voltages )	-	2000	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	3000	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	3000	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	2000	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	2000	-
Cl.17 of IS 302‐2-201: 2008(Overload Protection of Transformers & Associated Circuits)	-	2000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	2000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	2000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	2000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	2000	-
Cl.20 of IS 302-2-201: 2008(Stability & Mechanical Hazards)	-	2000	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	2000	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	2000	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	2000	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	2000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	2000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	2000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	2000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	2000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	2000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	2000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	2000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	2000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	2000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	2000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	2000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	2000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	2000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	2000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	2000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	2000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	2000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	2000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	2000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	2000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	2000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	2000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	2000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	2000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	2000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	2000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	2000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	2000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	2000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	2000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	2000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	2000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	2000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	2000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	2000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	2000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	2000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	2000	-
Cl.26 of IS 302-2-201: 2008(Terminals for External Conductors)	-	2000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	2000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	2000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	2000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	2000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	2000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	2000	-
Cl.28 of IS 302-2-201: 2008(Screws & Connections )	-	2000	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	2000	-
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	2000	-
Cl.31 of IS 302-2-201:2008(Resistance of Rusting )	-	2000	-
4(GENERAL REQUIREMENTS)	-	2000	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	2000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	2000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	2000	-

19 Jul, 2027

-
Included w.e.f.04.08.2025 Exclusion " Cl. 32 IS 302-2-35 (Radiation, Toxicity and similar hazards) Cl 19.11.4.1 to Cl 19.11.4.7

3918

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 21 (2025)

Wrought Aluminium and Aluminium Alloys for Manufacture of Utensils - Specification (Fifth Revision)

All Size

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.2(Chemical composition and mechanical properties of grades in Cl 5.1)	-	10000	-
Cl-5.3.1 a("Wrought Aluminium (with Minimum 99 Percent Al Content)- Iron+ Silicon")	-	10000	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Chromium")	-	10000	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Magnesium")	-	10000	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Manganese")	-	10000	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Nickel")	-	10000	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Zinc")	-	10000	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Titanium")	-	10000	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Tin")	-	10000	-
Cl-5.3.1 c("Wrought Aluminium (with Minimum 99 Percent Al Content)- Copper")	-	10000	-
Cl-5.3.1 Note 1("Wrought Aluminium (with Minimum 99 Percent Al Content)- Aluminium")	-	10000	-
Cl-5.3.1 d("Wrought Aluminium (with Minimum 99 Percent Al Content)- Others")	-	10000	-
Cl-5.3.2, Table-1 (i)(Wrought Aluminium Alloys-Silicon)	-	10000	-
Cl-5.3.2, Table-1 (ii)(Wrought Aluminium Alloys-Iron)	-	10000	-
Cl-5.3.2, Table-1 (iii)(Wrought Aluminium Alloys-Copper)	-	10000	-
Cl-5.3.2, Table-1 (iv)(Wrought Aluminium Alloys-Manganese)	-	10000	-
Cl-5.3.2, Table-1 (v)(Wrought Aluminium Alloys-Magnesium)	-	10000	-
Cl-5.3.2, Table-1 (vi)(Wrought Aluminium Alloys-Chromium)	-	10000	-
Cl-5.3.2, Table-1 (vii)(Wrought Aluminium Alloys-Nickel)	-	10000	-
Cl-5.3.2, Table-1 (viii)(Wrought Aluminium Alloys-Zinc)	-	10000	-
Cl-5.3.2, Table-1 (ix)(Wrought Aluminium Alloys -Zirconium)	-	10000	-
Cl-5.3.2, Table-1 (x)(Wrought Aluminium Alloys - Titanium)	-	10000	-
Cl-5.3.2, Table-1 (Note 3)(Wrought Aluminium Alloys- Aluminium)	-	10000	-
Cl-5.3.2, Table-1 (xi)(Wrought Aluminium Alloys- Others)	-	10000	-
Cl 5.4(Lead)	-	10000	-
Cl 5.4(Cadmium)	-	10000	-
Cl 5.4(Arsenic)	-	10000	-
Cl-7(Dimension)	-	10000	-
Cl-5.1(Material)	-	10000	-
Cl-4(General requirements)	-	10000	-
Cl-8(EARING TEST (OPTIONAL TEST))	-	0	-
Cl-5.2(Chemical composition and mechanical properties of grades in Cl 5.1)	-	0	-
Cl-5.3.1 a("Wrought Aluminium (with Minimum 99 Percent Al Content)- Iron+ Silicon")	-	0	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Chromium")	-	0	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Magnesium")	-	0	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Manganese")	-	0	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Nickel")	-	0	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Zinc")	-	0	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Titanium")	-	0	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Tin")	-	0	-
Cl-5.3.1 c("Wrought Aluminium (with Minimum 99 Percent Al Content)- Copper")	-	0	-
Cl-5.3.1 Note 1("Wrought Aluminium (with Minimum 99 Percent Al Content)- Aluminium")	-	0	-
Cl-5.3.1 d("Wrought Aluminium (with Minimum 99 Percent Al Content)- Others")	-	0	-
Cl-5.3.2, Table-1 (i)(Wrought Aluminium Alloys-Silicon)	-	0	-
Cl-5.3.2, Table-1 (ii)(Wrought Aluminium Alloys-Iron)	-	0	-
Cl-5.3.2, Table-1 (iii)(Wrought Aluminium Alloys-Copper)	-	0	-
Cl-5.3.2, Table-1 (iv)(Wrought Aluminium Alloys-Manganese)	-	0	-
Cl-5.3.2, Table-1 (v)(Wrought Aluminium Alloys-Magnesium)	-	0	-
Cl-5.3.2, Table-1 (vi)(Wrought Aluminium Alloys-Chromium)	-	0	-
Cl-5.3.2, Table-1 (vii)(Wrought Aluminium Alloys-Nickel)	-	0	-
Cl-5.3.2, Table-1 (viii)(Wrought Aluminium Alloys-Zinc)	-	0	-
Cl-5.3.2, Table-1 (ix)(Wrought Aluminium Alloys -Zirconium)	-	0	-
Cl-5.3.2, Table-1 (x)(Wrought Aluminium Alloys - Titanium)	-	0	-
Cl-5.3.2, Table-1 (Note 3)(Wrought Aluminium Alloys- Aluminium)	-	0	-
Cl-5.3.2, Table-1 (xi)(Wrought Aluminium Alloys- Others)	-	0	-
Cl 5.4(Lead)	-	0	-
Cl 5.4(Cadmium)	-	0	-
Cl 5.4(Arsenic)	-	0	-
Cl-7(Dimension)	-	0	-
Cl-5.1(Material)	-	0	-
Cl-4(General requirements)	-	0	-
Cl-8(EARING TEST (OPTIONAL TEST))	-	0	-
Cl-5.2(Chemical composition and mechanical properties of grades in Cl 5.1)	-	0	-
Cl-5.3.1 a("Wrought Aluminium (with Minimum 99 Percent Al Content)- Iron+ Silicon")	-	0	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Chromium")	-	0	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Magnesium")	-	0	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Manganese")	-	0	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Nickel")	-	0	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Zinc")	-	0	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Titanium")	-	0	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Tin")	-	0	-
Cl-5.3.1 c("Wrought Aluminium (with Minimum 99 Percent Al Content)- Copper")	-	0	-
Cl-5.3.1 Note 1("Wrought Aluminium (with Minimum 99 Percent Al Content)- Aluminium")	-	0	-
Cl-5.3.1 d("Wrought Aluminium (with Minimum 99 Percent Al Content)- Others")	-	0	-
Cl-5.3.2, Table-1 (i)(Wrought Aluminium Alloys-Silicon)	-	0	-
Cl-5.3.2, Table-1 (ii)(Wrought Aluminium Alloys-Iron)	-	0	-
Cl-5.3.2, Table-1 (iii)(Wrought Aluminium Alloys-Copper)	-	0	-
Cl-5.3.2, Table-1 (iv)(Wrought Aluminium Alloys-Manganese)	-	0	-
Cl-5.3.2, Table-1 (v)(Wrought Aluminium Alloys-Magnesium)	-	0	-
Cl-5.3.2, Table-1 (vi)(Wrought Aluminium Alloys-Chromium)	-	0	-
Cl-5.3.2, Table-1 (vii)(Wrought Aluminium Alloys-Nickel)	-	0	-
Cl-5.3.2, Table-1 (viii)(Wrought Aluminium Alloys-Zinc)	-	0	-
Cl-5.3.2, Table-1 (ix)(Wrought Aluminium Alloys -Zirconium)	-	0	-
Cl-5.3.2, Table-1 (x)(Wrought Aluminium Alloys - Titanium)	-	0	-
Cl-5.3.2, Table-1 (Note 3)(Wrought Aluminium Alloys- Aluminium)	-	0	-
Cl-5.3.2, Table-1 (xi)(Wrought Aluminium Alloys- Others)	-	0	-
Cl 5.4(Lead)	-	0	-
Cl 5.4(Cadmium)	-	0	-
Cl 5.4(Arsenic)	-	0	-
Cl-7(Dimension)	-	0	-
Cl-5.1(Material)	-	0	-
Cl-4(General requirements)	-	0	-
Cl-8(EARING TEST (OPTIONAL TEST))	-	0	-

-
Included w.e.f 16.09.2025 Excluding: Cl-8 (EARTHING TEST (OPTIONAL TEST))

3919

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS 302 : Part 2 : Sec 9 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 9 toasters, grills, roasters and similar appliances (First Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.32(Verification)	-	0	5% Discount for BIS
Cl.31(Verification)	-	0	-
Cl.30(Verification)	-	0	-
CL.29(Verification)	-	0	-
Cl.28(Verification)	-	0	-
Cl.27(Verification)	-	0	-
Cl.26(Verification)	-	0	-
Cl.25(Verification)	-	0	-
Cl.24(Verification)	-	0	-
Cl.23(Verification)	-	0	-
Cl.22(Verification)	-	0	-
Cl.21(Verification)	-	0	-
Cl.20(Verification)	-	0	-
Cl.19(Verification)	-	0	-
Cl. 16(Verification)	-	0	-
Cl.15.1(Moisture Resistance)	-	0	-
Cl.14(Verification)	-	0	-
Cl.13(Verification)	-	0	-
Cl.11(Verification)	-	0	-
Cl.10(Verification)	-	0	-
Cl.8(Verification)	-	0	-
Cl. 7(Verification)	-	0	-
Cl. 6(Classification- IS 302-1)	-	0	-
Cl. 32 IS 302-2-9(Radiation, Toxicity and similar hazards)	-	500	-
Cl. 31 IS 302-2-9(Resistance To Rusting )	-	500	-
Cl. 30 IS 302-2-9(Resistance To Heat, Fire And Tracking)	-	2500	-
Cl. 29 IS 302-2-9(Creepage Distances, Clearances And Distances Through Insulation)	-	1500	-
Cl. 28 IS 302-2-9(Screws and Connections)	-	1000	-
Cl. 27 IS 302-2-9(Provision For Earthing )	-	500	-
Cl. 26 IS 302-2-9(Terminal For External Conductors )	-	1000	-
Cl. 25 IS 302-2-9(Supply Connections and External Flexible Cables and Cords )	-	5000	-
Cl. 24 IS 302-2-9(Components)	-	1000	-
Cl. 23 IS 302-2-9(Internal Wiring)	-	2500	-
Cl. 22 IS 302-2-9(Construction )	-	5000	-
Cl. 21 IS 302-2-9(Mechanical Strength)	-	1000	-
Cl. 20 IS 302-2-9(Stability and mechanical Hazards)	-	1500	-
Cl. 19 IS 302-2-9(Abnormal Operation )	-	5000	-
Cl. 18 IS 302-2-9(Endurance)	-	100	-
Cl. 17 IS 302-2-9(Overload protection of transformers and associated circuits.)	-	2500	-
Cl. 16 IS 302-2-9(Leakage Current and Electric strength )	-	1000	-
Cl. 15 IS 302-2-9(Moisture Resistance)	-	5000	-
Cl. 14 IS 302-2-9(Transient overvoltage)	-	500	-
Cl. 13.3 IS 302-2-9(Leakage Current & Electric Strength at Operating Temperature)	-	1000	-
Cl. 11 IS 302-2-9(Heating)	-	5000	-
Cl. 10 IS 302-2-9(Power Input and Current )	-	2500	-
Cl. 9 IS 302-2-9(Starting of motor operated appliances)	-	500	-
Cl. 8 IS 302-2-9(Protection against access to live parts)	-	2500	-
Cl. 7 IS 302-2-9(Marking and Instruction)	-	1000	-
Cl. 6 IS 302-2-9(Classification- IS 302-1)	-	500	-
32(Radiation, toxicity and similar hazards)	-	0	-
31(Resistance to rusting)	-	0	-
31(Resistance to rusting)	-	0	-
30.2.4(Resistance to heat and fire)	-	0	-
30.2(Resistance to heat and fire)	-	0	-
30.1(Resistance to heat and fire)	-	0	-
29.3(Clearances, creepage distances and solid insulation)	-	0	-
29.2(Clearances, creepage distances and solid insulation)	-	0	-
29.2(Clearances, creepage distances and solid insulation)	-	0	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	-
28.2 to 28.4(Screws and connections)	-	0	-
28.1, Table No.-14(Screws and connections)	-	0	-
27.6(Provision for earthing)	-	0	-
27.5(Provision for earthing)	-	0	-
27.1 to 27.4(Provision for earthing)	-	0	-
26.10 & 26.11(Terminals for external conductors)	-	0	-
26.9(Terminals for external conductors)	-	0	-
26.1 to 26.8(Terminals for external conductors)	-	0	-
25.16 to 25.25(Supply connection and external flexible cords)	-	0	-
25.15(Supply connection and external flexible cords)	-	0	-
25.14(Supply connection and external flexible cords)	-	0	-
25.14(Supply connection and external flexible cords)	-	0	-
25.9 to 25.13(Supply connection and external flexible cords)	-	0	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	0	-
25.5 to 25.7(Supply connection and external flexible cords)	-	0	-
25.4(Supply connection and external flexible cords)	-	0	-
25.3(Supply connection and external flexible cords)	-	0	-
25.2(Supply connection and external flexible cords)	-	0	-
25.1(Supply connection and external flexible cords)	-	0	-
24.101(Components)	-	0	-
24.101(Components)	-	0	-
24.2 to 24.6(Components)	-	0	-
24.1(Components)	-	0	-
23.6 to 23.10(Internal wiring)	-	0	-
23.5(Internal wiring)	-	0	-
23.4(Internal wiring)	-	0	-
23.3(Internal wiring)	-	0	-
23.1 & 23.2(Internal wiring)	-	0	-
22.111(Constructions)	-	1000	-
22.111(Constructions)	-	1000	-
22.11o(Constructions)	-	1000	-
22.109(Constructions)	-	1000	-
22.108(Constructions)	-	1000	-
22.101 to 22.107(Constructions)	-	1000	-
22.13 to 22.48(Constructions)	-	0	-
22.12(Constructions)	-	500	-
22.11(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.7 to 22.10(Constructions)	-	0	-
22.6(Constructions)	-	0	-
22.5(Constructions)	-	0	-
22.4(Constructions)	-	0	-
22.3(Constructions)	-	500	-
22.2(Constructions)	-	500	-
22.1(Constructions)	-	500	-
21.101(MECHANICAL STRENGTH)	-	1000	-
21.101(MECHANICAL STRENGTH)	-	0	-
21.2(MECHANICAL STRENGTH)	-	0	-
21.1(MECHANICAL STRENGTH)	-	0	-
20.2(Stability and mechanical hazards)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
19.104(ABNORMAL OPERATION)	-	1000	-
19.103(ABNORMAL OPERATION)	-	1000	-
19.102(ABNORMAL OPERATION)	-	1000	-
19.101(ABNORMAL OPERATION)	-	1000	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	500	-
17(Overload protection of transformers and associated circuits)	-	0	-
16.3(Insulation resistance test)	-	0	-
16.3(Electric strength test)	-	0	-
16.1 & 16.2(Leakage current test)	-	0	-
15.3(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.1(Moisture resistance)	-	0	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	0	-
13.3 and Table No.- 4(Electric strength test)	-	0	-
13.1, 13.2(Leakage current test)	-	0	-
13.1, 13.2(Leakage current test)	-	0	-
11.101(Heating)	-	0	-
11.1 to 11.8, Table No.-3(Heating)	-	0	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	0	-
8.1.5(Protection against access to live parts)	-	0	-
8.1.4(Protection against access to live parts)	-	0	-
8.1.3(Protection against access to live parts)	-	0	-
8.1.2(Protection against access to live parts)	-	0	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	0	-
7.14(Legibility & Durability of Markings test)	-	0	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	0	-
32(Radiation, toxicity and similar hazards)	-	0	-
31(Resistance to rusting)	-	0	-
31(Resistance to rusting)	-	0	-
30.2.4(Resistance to heat and fire)	-	0	-
30.2(Resistance to heat and fire)	-	0	-
30.1(Resistance to heat and fire)	-	0	-
29.3(Clearances, creepage distances and solid insulation)	-	0	-
29.2(Clearances, creepage distances and solid insulation)	-	0	-
29.2(Clearances, creepage distances and solid insulation)	-	0	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	-
28.2 to 28.4(Screws and connections)	-	0	-
28.1, Table No.-14(Screws and connections)	-	0	-
27.6(Provision for earthing)	-	0	-
27.5(Provision for earthing)	-	0	-
27.1 to 27.4(Provision for earthing)	-	0	-
26.10 & 26.11(Terminals for external conductors)	-	0	-
26.9(Terminals for external conductors)	-	0	-
26.1 to 26.8(Terminals for external conductors)	-	0	-
25.16 to 25.25(Supply connection and external flexible cords)	-	0	-
25.15(Supply connection and external flexible cords)	-	0	-
25.14(Supply connection and external flexible cords)	-	0	-
25.14(Supply connection and external flexible cords)	-	0	-
25.9 to 25.13(Supply connection and external flexible cords)	-	0	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	0	-
25.5 to 25.7(Supply connection and external flexible cords)	-	0	-
25.4(Supply connection and external flexible cords)	-	0	-
25.3(Supply connection and external flexible cords)	-	0	-
25.2(Supply connection and external flexible cords)	-	0	-
25.1(Supply connection and external flexible cords)	-	0	-
24.101(Components)	-	0	-
24.101(Components)	-	0	-
24.2 to 24.6(Components)	-	0	-
24.1(Components)	-	0	-
23.6 to 23.10(Internal wiring)	-	0	-
23.5(Internal wiring)	-	0	-
23.4(Internal wiring)	-	0	-
23.3(Internal wiring)	-	0	-
23.1 & 23.2(Internal wiring)	-	0	-
22.111(Constructions)	-	0	-
22.111(Constructions)	-	0	-
22.11o(Constructions)	-	0	-
22.109(Constructions)	-	0	-
22.108(Constructions)	-	0	-
22.101 to 22.107(Constructions)	-	0	-
22.13 to 22.48(Constructions)	-	0	-
22.12(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.7 to 22.10(Constructions)	-	0	-
22.6(Constructions)	-	0	-
22.5(Constructions)	-	0	-
22.4(Constructions)	-	0	-
22.3(Constructions)	-	0	-
22.2(Constructions)	-	0	-
22.1(Constructions)	-	0	-
21.101(MECHANICAL STRENGTH)	-	0	-
21.101(MECHANICAL STRENGTH)	-	0	-
21.2(MECHANICAL STRENGTH)	-	0	-
21.1(MECHANICAL STRENGTH)	-	0	-
20.2(Stability and mechanical hazards)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
19.104(ABNORMAL OPERATION)	-	0	-
19.103(ABNORMAL OPERATION)	-	0	-
19.102(ABNORMAL OPERATION)	-	0	-
19.101(ABNORMAL OPERATION)	-	0	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
16.3(Insulation resistance test)	-	0	-
16.3(Electric strength test)	-	0	-
16.1 & 16.2(Leakage current test)	-	0	-
15.3(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.1(Moisture resistance)	-	0	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	0	-
13.3 and Table No.- 4(Electric strength test)	-	0	-
13.1, 13.2(Leakage current test)	-	0	-
13.1, 13.2(Leakage current test)	-	0	-
11.101(Heating)	-	0	-
11.1 to 11.8, Table No.-3(Heating)	-	0	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	0	-
8.1.5(Protection against access to live parts)	-	0	-
8.1.4(Protection against access to live parts)	-	0	-
8.1.3(Protection against access to live parts)	-	0	-
8.1.2(Protection against access to live parts)	-	0	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	0	-
7.14(Legibility & Durability of Markings test)	-	0	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	0	-
32(Radiation ,Toxicity and similar hazards)	-	0	-
31(Resistance to Rusting)	-	0	-
30(Resistance to Heat & Fire)	-	0	-
29(Clearances, Creepage Distances & Solid Insulation)	-	0	-
28(Screws & Connections)	-	0	-
27(Provision For Earthing)	-	0	-
26(Terminals For External Conductors)	-	0	-
25(Supply Connection & External Flexible Cords)	-	0	-
24(Components)	-	0	-
23(Internal wiring)	-	0	-
22(Construction)	-	0	-
21(Mechanical strength)	-	0	-
20(Stability & Mechanical Hazards)	-	0	-
19(Abnormal Operation)	-	0	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	0	-
16(Leakage Current and Electric Strength)	-	0	-
15(Moisture Resistance)	-	0	-
14(Transient Over Voltage)	-	0	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	0	-
11(Temperature Rise/ Heating)	-	0	-
10(Power Input & Current)	-	0	-
9(Starting Of Motor Operated Appliances)	-	0	-
8(Protection against access to live parts)	-	0	-
32(Radiation ,Toxicity and similar hazards)	-	0	-
31(Resistance to Rusting)	-	0	-
30(Resistance to Heat & Fire)	-	0	-
29(Clearances, Creepage Distances & Solid Insulation)	-	0	-
28(Screws & Connections)	-	0	-
27(Provision For Earthing)	-	0	-
26(Terminals For External Conductors)	-	0	-
25(Supply Connection & External Flexible Cords)	-	0	-
24(Components)	-	0	-
23(Internal wiring)	-	0	-
22(Construction)	-	0	-
21(Mechanical strength)	-	0	-
20(Stability & Mechanical Hazards)	-	0	-
19(Abnormal Operation)	-	0	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	0	-
16(Leakage Current and Electric Strength)	-	0	-
15(Moisture Resistance)	-	0	-
14(Transient Over Voltage)	-	0	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	0	-
11(Temperature Rise/ Heating)	-	0	-
10(Power Input & Current)	-	0	-
9(Starting Of Motor Operated Appliances)	-	0	-
8(Protection against access to live parts)	-	0	-
19.11.4.1(Electrostatic discharges)	-	10000	-
19.11.4.2(Radiated fields)	-	15000	-
19.11.4.3(Fast transient bursts)	-	25000	-
19.11.4.4(Surge immunity test)	-	10000	-
19.11.4.5(Immunity to conducted discharges)	-	25000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	10000	-
19.11.4.7(Harmonics)	-	15000	-

-
Included w.e.f. 28.07.2025

3920

SWASTIK ELECTRONICS TESTING CENTRE (OPC) PVT. LTD., GHAZIABAD

8163826

IS/IEC 62368 : Part 1 (2023)

Audio Video Information and Communication Technology Equipment - Part 1: Safety Requirements (Second Revision)

120000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(General- materials, components)	-	1000	NA
Cl-4.2(Energy source classifications)	-	500	NA
Cl-4.3(Protection against energy sources)	-	500	NA
Cl-4.4(Safeguards)	-	500	NA
Cl-4.5(Explosion)	-	500	NA
Cl-4.6(Fixing of conductors and conductive parts)	-	800	NA
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	600	NA
Cl-4.8(Equipment containing coin or button cell batteries)	-	1500	NA
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	500	NA
Cl-4.10(Components requirements)	-	600	NA
Cl-5.1(General- Electrically-caused injury)	-	600	NA
Cl-5.2(Classification and limits of electrical energy sources)	-	1000	NA
Cl-5.3(Protection against electrical energy sources)	-	1000	NA
Cl-5.4(Insulation materials and requirements)	-	3000	NA
Cl-5.5(Components as safeguards)	-	2000	NA
Cl-5.6(Protective conductor)	-	1000	NA
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	1500	NA
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	1000	NA
Cl-6.1(General- Electrically-caused fire)	-	600	NA
Cl-6.2(Classification of power sources and potential ignition sources)	-	1000	NA
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	1000	NA
Cl-6.4(Safeguards against fire under single fault conditions)	-	1000	NA
Cl-6.5(Internal and external wiring)	-	1000	NA
Cl-7.1(General- Injury caused by hazardous substances)	-	400	NA
Cl-7.2(Reduction of exposure to hazardous substances)	-	1500	NA
Cl-7.3(Ozone exposure)	-	500	NA
Cl-7.4(Use of personal safeguards or personal protective equipment (PPE)	-	400	NA
Cl-7.5(Use of instructional safeguards and instructions)	-	400	NA
Cl-8.1(General- Mechanically-caused injury)	-	400	NA
Cl-8.2(Mechanical energy source classifications)	-	400	NA
Cl-8.3(Safeguards against mechanical energy sources)	-	500	NA
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	1000	NA
Cl-8.5(Safeguards against moving parts)	-	1000	NA
Cl-8.6(Stability of equipment)	-	1000	NA
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	1000	NA
Cl-8.8(Handle strength)	-	1000	NA
Cl-8.9(Wheels or casters attachment requirements)	-	1000	NA
Cl-8.10(Carts, stands, and similar carriers)	-	1000	NA
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	1500	NA
Cl-9.1(General-Thermal burn injury)	-	500	NA
Cl-9.2(Thermal energy source classifications)	-	1500	NA
Cl-9.3(Touch temperature limits)	-	2000	NA
Cl-9.4(Safeguards against thermal energy sources)	-	600	NA
Cl-9.5(Requirements for safeguards)	-	500	NA
Cl-9.6(Requirements for wireless power transmitters)	-	1000	NA
Cl-10.1(General-Radiation)	-	0	NA
Cl-10.2(Radiation energy source classifications)	-	0	NA
Cl-10.3(Safeguards against laser radiation)	-	0	NA
Cl-10.4("Safeguards against optical radiation from lamps and lamp systems (including LED types)")	-	0	NA
Cl-10.5(Safeguards against X-radiation)	-	0	NA
Cl-10.6(Safeguards against acoustic energy sources)	-	0	NA
Annex A(Examples of equipment within the scope of this document)	-	0	NA
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	400	NA
Annex B-2(Normal operating conditions)	-	2000	NA
Annex B-3(Simulated abnormal operating conditions)	-	2000	NA
Annex B-4(Simulated single fault conditions)	-	2000	NA
Annex C-1(Protection of materials in equipment from UV radiation)	-	0	NA
Annex C-2(UV light conditioning test)	-	0	NA
Annex D-1(Impulse test generators)	-	1500	NA
Annex D-2(Antenna interface test generator)	-	1500	NA
Annex D-3(Electronic pulse generator)	-	1500	NA
Annex E-1(Electrical energy source classification for audio signals)	-	1000	NA
Annex E-2(Audio signals used during test)	-	1000	NA
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	1000	NA
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	500	NA
Annex F-2(Letter symbols and graphical symbols)	-	500	NA
Annex F-3(Equipment markings)	-	500	NA
Annex F-4(Instructions)	-	500	NA
Annex F-5(Instructional safeguards)	-	400	NA
Annex G-1(Switches)	-	0	NA
Annex G-2(Relays)	-	0	NA
Annex G-3(Protective devices)	-	0	NA
Annex G-4(Connectors)	-	0	NA
Annex G-5(Wound components)	-	1000	NA
Annex G-6(Wire insulation)	-	1000	NA
Annex G-7(Mains power supply cords and interconnection cables)	-	1000	NA
Annex G-8(Varistors)	-	0	NA
Annex G-9(Integrated circuit (IC) current limiters)	-	0	NA
Annex G-10(Resistors)	-	1000	NA
Annex G-11(Capacitors and RC units)	-	0	NA
Annex G-12(Optocouplers)	-	0	NA
Annex G-13(Printed boards)	-	1000	NA
Annex G-14(Coatings on component terminals)	-	2000	NA
Annex G-15(Pressurized liquid filled components or LFC assemblies)	-	2000	NA
Annex G-16(IC that includes a capacitor discharge function (ICX))	-	1000	NA
Annex H-1(General- Criteria for telephone ringing signals)	-	1000	NA
Annex H-2(Method A)	-	1000	NA
Annex H-3(Method B)	-	1000	NA
Annex I(Overvoltage categories (see IEC 60364-4-44))	-	1000	NA
Annex J-1(General-Insulated winding wires for use without interleaved insulation)	-	1000	NA
Annex J-2(Type tests)	-	1000	NA
Annex J-3(Testing during manufacturing)	-	0	NA
Annex K-1(General- Safety interlocks)	-	0	NA
Annex K-2(Components of the safety interlock safeguard mechanism)	-	0	NA
Annex K-3(Inadvertent change of operating mode)	-	0	NA
Annex K-4(Interlock safeguard override)	-	0	NA
Annex K-5(Fail-safe)	-	0	NA
Annex K-6(Mechanically operated safety interlocks)	-	0	NA
Annex K-7(Interlock circuit isolation)	-	0	NA
Annex L-1(General requirements)	-	1000	NA
Annex L-2(Permanently connected equipment)	-	1000	NA
Annex L-3()	-	1000	NA
Annex L-4(Single-phase equipment)	-	1000	NA
Annex L-5(Three-phase equipment)	-	1000	NA
Annex L-6(Switches as disconnect devices)	-	1000	NA
Annex L-7(Plugs as disconnect devices)	-	1000	NA
Annex L-8(Multiple power sources)	-	1000	NA
Annex L-9(Compliance criteria)	-	1000	NA
Annex M-1(General requirements)	-	1000	NA
Annex M-2(Safety of batteries and their cells)	-	1000	NA
Annex M-3(Protection circuits for batteries provided within the equipment)	-	1000	NA
Annex M-4(Additional safeguards for equipment containing a secondary lithium battery)	-	2000	NA
Annex M-5(Risk of burn due to short-circuit during carrying)	-	1000	NA
Annex M-6(Safeguards against short-circuits)	-	500	NA
Annex M-7(Risk of explosion from lead acid and NiCd batteries)	-	0	NA
Annex M-8("Protection against internal ignition from external spark sources of rechargeable batteries with aqueous electrolyte")	-	0	NA
Annex M-9(Preventing electrolyte spillage)	-	500	NA
Annex M-10(Instructions to prevent reasonably foreseeable misuse)	-	500	NA
Annex N(Electrochemical potentials (V))	-	500	NA
Annex O(Measurement of creepage distances and clearances)	-	1000	NA
Annex P-1(General-Safeguards against conductive objects)	-	500	NA
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	1000	NA
Annex P-3(Safeguards against spillage of internal liquids)	-	1000	NA
Annex P-4(Metallized coatings and adhesives securing parts)	-	1000	NA
Annex Q-1(Limited power source)	-	1000	NA
Annex Q-2(Test for external circuits – paired conductor cable)	-	1000	NA
Annex R(Limited short-circuit test)	-	0	NA
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	1000	NA
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	1000	NA
Annex S-3(Flammability tests for the bottom of a fire enclosure)	-	0	NA
Annex S-4(Flammability classification of materials)	-	1000	NA
Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W)	-	1000	NA
Annex S-6(Grille covering material, cloth, and reticulated foam)	-	0	NA
Annex T-1(General-Mechanical strength tests)	-	500	NA
Annex T-2(Steady force test, 10 N)	-	500	NA
Annex T-3(Steady force test, 30 N)	-	500	NA
Annex T-4(Steady force test, 100 N)	-	500	NA
Annex T-5(Steady force test, 250 N)	-	500	NA
Annex T-6(Enclosure impact test)	-	500	NA
Annex T-7(Drop test)	-	500	NA
Annex T-8(Stress relief test)	-	500	NA
Annex T-9(Glass impact test)	-	500	NA
Annex T-10(Glass fragmentation test)	-	500	NA
Annex T-11(Test for telescoping or rod antennas)	-	500	NA
Annex U("Mechanical strength of CRTs and protection against the effects of implosion")	-	0	NA
Annex V-1(Accessible parts of equipment)	-	500	NA
Annex V-2(Accessible part criterion)	-	500	NA
Annex W(Comparison of terms introduced in this document)	-	500	NA
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	1900	NA
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	2000	NA
Annex Y-2(Resistance to UV radiation)	-	0	NA
Annex Y-3(Resistance to corrosion)	-	2000	NA
Annex Y-4(Gaskets)	-	0	NA
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	2000	NA
Annex Y-6(Mechanical strength of enclosures)	-	1500	NA
Cl-4.1(General- materials, components)	-	0	NA
Cl-4.2(Energy source classifications)	-	0	NA
Cl-4.3(Protection against energy sources)	-	0	NA
Cl-4.4(Safeguards)	-	0	NA
Cl-4.5(Explosion)	-	0	NA
Cl-4.6(Fixing of conductors and conductive parts)	-	0	NA
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	0	NA
Cl-4.8(Equipment containing coin or button cell batteries)	-	0	NA
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	0	NA
Cl-4.10(Components requirements)	-	0	NA
Cl-5.1(General- Electrically-caused injury)	-	0	NA
Cl-5.2(Classification and limits of electrical energy sources)	-	0	NA
Cl-5.3(Protection against electrical energy sources)	-	0	NA
Cl-5.4(Insulation materials and requirements)	-	0	NA
Cl-5.5(Components as safeguards)	-	0	NA
Cl-5.6(Protective conductor)	-	0	NA
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	0	NA
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	0	NA
Cl-6.1(General- Electrically-caused fire)	-	0	NA
Cl-6.2(Classification of power sources and potential ignition sources)	-	0	NA
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	0	NA
Cl-6.4(Safeguards against fire under single fault conditions)	-	0	NA
Cl-6.5(Internal and external wiring)	-	0	NA
Cl-7.1(General- Injury caused by hazardous substances)	-	0	NA
Cl-7.2(Reduction of exposure to hazardous substances)	-	0	NA
Cl-7.3(Ozone exposure)	-	0	NA
Cl-7.4(Use of personal safeguards or personal protective equipment (PPE)	-	0	NA
Cl-7.5(Use of instructional safeguards and instructions)	-	0	NA
Cl-8.1(General- Mechanically-caused injury)	-	0	NA
Cl-8.2(Mechanical energy source classifications)	-	0	NA
Cl-8.3(Safeguards against mechanical energy sources)	-	0	NA
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	0	NA
Cl-8.5(Safeguards against moving parts)	-	0	NA
Cl-8.6(Stability of equipment)	-	0	NA
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	0	NA
Cl-8.8(Handle strength)	-	0	NA
Cl-8.9(Wheels or casters attachment requirements)	-	0	NA
Cl-8.10(Carts, stands, and similar carriers)	-	0	NA
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	0	NA
Cl-9.1(General-Thermal burn injury)	-	0	NA
Cl-9.2(Thermal energy source classifications)	-	0	NA
Cl-9.3(Touch temperature limits)	-	0	NA
Cl-9.4(Safeguards against thermal energy sources)	-	0	NA
Cl-9.5(Requirements for safeguards)	-	0	NA
Cl-9.6(Requirements for wireless power transmitters)	-	0	NA
Cl-10.1(General-Radiation)	-	0	NA
Cl-10.2(Radiation energy source classifications)	-	0	NA
Cl-10.3(Safeguards against laser radiation)	-	0	NA
Cl-10.4("Safeguards against optical radiation from lamps and lamp systems (including LED types)")	-	0	NA
Cl-10.5(Safeguards against X-radiation)	-	0	NA
Cl-10.6(Safeguards against acoustic energy sources)	-	0	NA
Annex A(Examples of equipment within the scope of this document)	-	0	NA
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	0	NA
Annex B-2(Normal operating conditions)	-	0	NA
Annex B-3(Simulated abnormal operating conditions)	-	0	NA
Annex B-4(Simulated single fault conditions)	-	0	NA
Annex C-1(Protection of materials in equipment from UV radiation)	-	0	NA
Annex C-2(UV light conditioning test)	-	0	NA
Annex D-1(Impulse test generators)	-	0	NA
Annex D-2(Antenna interface test generator)	-	0	NA
Annex D-3(Electronic pulse generator)	-	0	NA
Annex E-1(Electrical energy source classification for audio signals)	-	0	NA
Annex E-2(Audio signals used during test)	-	0	NA
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	0	NA
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	0	NA
Annex F-2(Letter symbols and graphical symbols)	-	0	NA
Annex F-3(Equipment markings)	-	0	NA
Annex F-4(Instructions)	-	0	NA
Annex F-5(Instructional safeguards)	-	0	NA
Annex G-1(Switches)	-	0	NA
Annex G-2(Relays)	-	0	NA
Annex G-3(Protective devices)	-	0	NA
Annex G-4(Connectors)	-	0	NA
Annex G-5(Wound components)	-	0	NA
Annex G-6(Wire insulation)	-	0	NA
Annex G-7(Mains power supply cords and interconnection cables)	-	0	NA
Annex G-8(Varistors)	-	0	NA
Annex G-9(Integrated circuit (IC) current limiters)	-	0	NA
Annex G-10(Resistors)	-	0	NA
Annex G-11(Capacitors and RC units)	-	0	NA
Annex G-12(Optocouplers)	-	0	NA
Annex G-13(Printed boards)	-	0	NA
Annex G-14(Coatings on component terminals)	-	0	NA
Annex G-15(Pressurized liquid filled components or LFC assemblies)	-	0	NA
Annex G-16(IC that includes a capacitor discharge function (ICX))	-	0	NA
Annex H-1(General- Criteria for telephone ringing signals)	-	0	NA
Annex H-2(Method A)	-	0	NA
Annex H-3(Method B)	-	0	NA
Annex I(Overvoltage categories (see IEC 60364-4-44))	-	0	NA
Annex J-1(General-Insulated winding wires for use without interleaved insulation)	-	0	NA
Annex J-2(Type tests)	-	0	NA
Annex J-3(Testing during manufacturing)	-	0	NA
Annex K-1(General- Safety interlocks)	-	0	NA
Annex K-2(Components of the safety interlock safeguard mechanism)	-	0	NA
Annex K-3(Inadvertent change of operating mode)	-	0	NA
Annex K-4(Interlock safeguard override)	-	0	NA
Annex K-5(Fail-safe)	-	0	NA
Annex K-6(Mechanically operated safety interlocks)	-	0	NA
Annex K-7(Interlock circuit isolation)	-	0	NA
Annex L-1(General requirements)	-	0	NA
Annex L-2(Permanently connected equipment)	-	0	NA
Annex L-3()	-	0	NA
Annex L-4(Single-phase equipment)	-	0	NA
Annex L-5(Three-phase equipment)	-	0	NA
Annex L-6(Switches as disconnect devices)	-	0	NA
Annex L-7(Plugs as disconnect devices)	-	0	NA
Annex L-8(Multiple power sources)	-	0	NA
Annex L-9(Compliance criteria)	-	0	NA
Annex M-1(General requirements)	-	0	NA
Annex M-2(Safety of batteries and their cells)	-	0	NA
Annex M-3(Protection circuits for batteries provided within the equipment)	-	0	NA
Annex M-4(Additional safeguards for equipment containing a secondary lithium battery)	-	0	NA
Annex M-5(Risk of burn due to short-circuit during carrying)	-	0	NA
Annex M-6(Safeguards against short-circuits)	-	0	NA
Annex M-7(Risk of explosion from lead acid and NiCd batteries)	-	0	NA
Annex M-8("Protection against internal ignition from external spark sources of rechargeable batteries with aqueous electrolyte")	-	0	NA
Annex M-9(Preventing electrolyte spillage)	-	0	NA
Annex M-10(Instructions to prevent reasonably foreseeable misuse)	-	0	NA
Annex N(Electrochemical potentials (V))	-	0	NA
Annex O(Measurement of creepage distances and clearances)	-	0	NA
Annex P-1(General-Safeguards against conductive objects)	-	0	NA
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	0	NA
Annex P-3(Safeguards against spillage of internal liquids)	-	0	NA
Annex P-4(Metallized coatings and adhesives securing parts)	-	0	NA
Annex Q-1(Limited power source)	-	0	NA
Annex Q-2(Test for external circuits – paired conductor cable)	-	0	NA
Annex R(Limited short-circuit test)	-	0	NA
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	0	NA
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	0	NA
Annex S-3(Flammability tests for the bottom of a fire enclosure)	-	0	NA
Annex S-4(Flammability classification of materials)	-	0	NA
Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W)	-	0	NA
Annex S-6(Grille covering material, cloth, and reticulated foam)	-	0	NA
Annex T-1(General-Mechanical strength tests)	-	0	NA
Annex T-2(Steady force test, 10 N)	-	0	NA
Annex T-3(Steady force test, 30 N)	-	0	NA
Annex T-4(Steady force test, 100 N)	-	0	NA
Annex T-5(Steady force test, 250 N)	-	0	NA
Annex T-6(Enclosure impact test)	-	0	NA
Annex T-7(Drop test)	-	0	NA
Annex T-8(Stress relief test)	-	0	NA
Annex T-9(Glass impact test)	-	0	NA
Annex T-10(Glass fragmentation test)	-	0	NA
Annex T-11(Test for telescoping or rod antennas)	-	0	NA
Annex U("Mechanical strength of CRTs and protection against the effects of implosion")	-	0	NA
Annex V-1(Accessible parts of equipment)	-	0	NA
Annex V-2(Accessible part criterion)	-	0	NA
Annex W(Comparison of terms introduced in this document)	-	0	NA
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	0	NA
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	0	NA
Annex Y-2(Resistance to UV radiation)	-	0	NA
Annex Y-3(Resistance to corrosion)	-	0	NA
Annex Y-4(Gaskets)	-	0	NA
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	0	NA
Annex Y-6(Mechanical strength of enclosures)	-	0	NA

15 May, 2028

-
Included w.e.f.01.09.2025 Exclusion Cl-10.1 (General-Radiation) Cl-10.2 (Radiation energy source classifications) Cl-10.3 (Safeguards against laser radiation) Cl-10.4 ("Safeguards against optical radiation from lamps and lamp systems (including LED types)") Cl-10.5 (Safeguards against X-radiation) Cl-10.6 (Safeguards against acoustic energy sources) Annex C-1 (Protection of materials in equipment from UV radiation) Annex C-2 (UV light conditioning test) Annex M-7 (Risk of explosion from lead acid and NiCd batteries) Annex M-8 ("Protection against internal ignition from external spark sources of rechargeable batteries with aqueous electrolyte") Annex R (Limited short-circuit test) Annex S-3 (Flammability tests for the bottom of a fire enclosure) Annex S-6 (Grille covering material, cloth, and reticulated foam) Annex U ("Mechanical strength of CRTs and protection against the effects of implosion") Annex Y-2 (Resistance to UV radiation) Annex Y-4 (Gaskets)

3921

DELHI TEST HOUSE, Azadhpur

8131406

IS 21 (2025)

Wrought Aluminium and Aluminium Alloys for Manufacture of Utensils - Specification (Fifth Revision)

all

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Material)	-	3500	Rs. 1000 EXTRA PER OTHER ELEMENT
Cl-5.2(Chemical composition and mechanical properties of grades in Cl 5.1)	-	8500	Rs. 1000 EXTRA PER OTHER ELEMENT
Cl-5.3.1 a("Wrought Aluminium (with Minimum 99 Percent Al Content)- Iron+ Silicon")	-	500	Rs. 1000 EXTRA PER OTHER ELEMENT
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Chromium")	-	500	Rs. 1000 EXTRA PER OTHER ELEMENT
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Magnesium")	-	500	Rs. 1000 EXTRA PER OTHER ELEMENT
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Manganese")	-	500	Rs. 1000 EXTRA PER OTHER ELEMENT
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Nickel")	-	500	Rs. 1000 EXTRA PER OTHER ELEMENT
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Zinc")	-	500	Rs. 1000 EXTRA PER OTHER ELEMENT
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Titanium")	-	500	Rs. 1000 EXTRA PER OTHER ELEMENT
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Tin")	-	500	Rs. 1000 EXTRA PER OTHER ELEMENT
Cl-5.3.1 c("Wrought Aluminium (with Minimum 99 Percent Al Content)- Copper")	-	500	Rs. 1000 EXTRA PER OTHER ELEMENT
Cl-5.3.1 Note 1("Wrought Aluminium (with Minimum 99 Percent Al Content)- Aluminium")	-	500	Rs. 1000 EXTRA PER OTHER ELEMENT
Cl-5.3.2, Table-1 (i)(Wrought Aluminium Alloys-Silicon)	-	500	Rs. 1000 EXTRA PER OTHER ELEMENT
Cl-5.3.2, Table-1 (ii)(Wrought Aluminium Alloys-Iron)	-	500	Rs. 1000 EXTRA PER OTHER ELEMENT
Cl-5.3.2, Table-1 (iii)(Wrought Aluminium Alloys-Copper)	-	500	Rs. 1000 EXTRA PER OTHER ELEMENT
Cl-5.3.2, Table-1 (iv)(Wrought Aluminium Alloys-Manganese)	-	500	Rs. 1000 EXTRA PER OTHER ELEMENT
Cl-5.3.2, Table-1 (v)(Wrought Aluminium Alloys-Magnesium)	-	500	Rs. 1000 EXTRA PER OTHER ELEMENT
Cl-5.3.2, Table-1 (vi)(Wrought Aluminium Alloys-Chromium)	-	500	Rs. 1000 EXTRA PER OTHER ELEMENT
Cl-5.3.2, Table-1 (vii)(Wrought Aluminium Alloys-Nickel)	-	500	Rs. 1000 EXTRA PER OTHER ELEMENT
Cl-5.3.2, Table-1 (viii)(Wrought Aluminium Alloys-Zinc)	-	500	Rs. 1000 EXTRA PER OTHER ELEMENT
Cl-5.3.2, Table-1 (ix)(Wrought Aluminium Alloys -Zirconium)	-	500	Rs. 1000 EXTRA PER OTHER ELEMENT
Cl-5.3.2, Table-1 (x)(Wrought Aluminium Alloys - Titanium)	-	500	Rs. 1000 EXTRA PER OTHER ELEMENT
Cl-5.3.2, Table-1 (Note 3)(Wrought Aluminium Alloys- Aluminium)	-	500	Rs. 1000 EXTRA PER OTHER ELEMENT
Cl 5.4(Lead)	-	500	Rs. 1000 EXTRA PER OTHER ELEMENT
Cl 5.4(Cadmium)	-	500	Rs. 1000 EXTRA PER OTHER ELEMENT
Cl 5.4(Arsenic)	-	500	Rs. 1000 EXTRA PER OTHER ELEMENT
Cl-7(Dimension)	-	500	Rs. 1000 EXTRA PER OTHER ELEMENT
Cl-5.3.1 d("Wrought Aluminium (with Minimum 99 Percent Al Content)- Others")	-	1000	Rs. 1000 EXTRA PER OTHER ELEMENT
Cl-5.3.2, Table-1 (xi)(Wrought Aluminium Alloys- Others)	-	1000	Rs. 1000 EXTRA PER OTHER ELEMENT
Cl-5.1(Material)	-	-	-
Cl-5.2(Chemical composition and mechanical properties of grades in Cl 5.1)	-	-	-
Cl-5.3.1 a("Wrought Aluminium (with Minimum 99 Percent Al Content)- Iron+ Silicon")	-	-	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Chromium")	-	-	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Magnesium")	-	-	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Manganese")	-	-	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Nickel")	-	-	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Zinc")	-	-	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Titanium")	-	-	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Tin")	-	-	-
Cl-5.3.1 c("Wrought Aluminium (with Minimum 99 Percent Al Content)- Copper")	-	-	-
Cl-5.3.1 Note 1("Wrought Aluminium (with Minimum 99 Percent Al Content)- Aluminium")	-	-	-
Cl-5.3.2, Table-1 (i)(Wrought Aluminium Alloys-Silicon)	-	-	-
Cl-5.3.2, Table-1 (ii)(Wrought Aluminium Alloys-Iron)	-	-	-
Cl-5.3.2, Table-1 (iii)(Wrought Aluminium Alloys-Copper)	-	-	-
Cl-5.3.2, Table-1 (iv)(Wrought Aluminium Alloys-Manganese)	-	-	-
Cl-5.3.2, Table-1 (v)(Wrought Aluminium Alloys-Magnesium)	-	-	-
Cl-5.3.2, Table-1 (vi)(Wrought Aluminium Alloys-Chromium)	-	-	-
Cl-5.3.2, Table-1 (vii)(Wrought Aluminium Alloys-Nickel)	-	-	-
Cl-5.3.2, Table-1 (viii)(Wrought Aluminium Alloys-Zinc)	-	-	-
Cl-5.3.2, Table-1 (ix)(Wrought Aluminium Alloys -Zirconium)	-	-	-
Cl-5.3.2, Table-1 (x)(Wrought Aluminium Alloys - Titanium)	-	-	-
Cl-5.3.2, Table-1 (Note 3)(Wrought Aluminium Alloys- Aluminium)	-	-	-
Cl 5.4(Lead)	-	-	-
Cl 5.4(Cadmium)	-	-	-
Cl 5.4(Arsenic)	-	-	-
Cl-7(Dimension)	-	-	-
Cl-5.3.1 d("Wrought Aluminium (with Minimum 99 Percent Al Content)- Others")	-	-	-
Cl-5.3.2, Table-1 (xi)(Wrought Aluminium Alloys- Others)	-	-	-

17 Jun, 2027

-
Included w.e.f. 30.07.2025 Exclusion: Cl-8 (EARING TEST (OPTIONAL TEST)), Cl-4 (General requirements)

3922

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS 302 : Part 2 : Sec 4 (1993)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 4 spin extractors

48000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(GENERAL REQUIREMENTS)	-	100	-
4(GENERAL NOTES ON TESTS)	-	100	-
5(RATING)	-	100	-
6(CLASSIFICATION)	-	500	-
7(MARKING)	-	500	-
8(PROTECTION AGAINST ELECTRIC SHOCK)	-	1000	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	1500	-
10(INPUT AND CURRENT)	-	2500	-
11(HEATING)	-	5000	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	2000	-
14(RADIO AND TELEVISION INTERFERENCE SUPPRESSION)	-	5000	-
15(MOISTURE RESISTANCE)	-	10000	-
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH (AFTER HUMIDITY TREATMENT))	-	2500	-
17(OVERLOAD PROTECTION)	-	5000	-
19(ABNORMAL OPERATION)	-	10000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	1000	-
21(MECHANICAL STRENGTH)	-	2500	-
22(CONSTRUCTION)	-	5000	-
23(INTERNAL WIRING)	-	2500	-
24(COMPONENTS)	-	2500	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	2500	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1000	-
27(PROVISION FOR EARTHING)	-	1000	-
28(SCREWS AND CONNECTIONS)	-	1000	-
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	5000	-
30(RESISTANCE TO HEAT, FIRE AND TRACKING)	-	2500	-
31(RESISTANCE TO RUSTING)	-	1000	-
19.11.4.1(Electrostatic discharges)	-	10000	-
19.11.4.2(Radiated fields)	-	10000	-
19.11.4.3(Fast transient bursts)	-	10000	-
19.11.4.4(Surge immunity test)	-	10000	-
19.11.4.5(Immunity to conducted discharges)	-	10000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	10000	-
19.11.4.7(Harmonics)	-	10000	-

-
Included w.e.f. 04.08.2025

3923

PAAM Testing Labs Private Limited, Greater Noida

8185506

IS 1239 : Part 1 (2004)

Steel Tubes, Tubulars and Other Wrought Steel Fittings : Part 1 Steel Tubes (BI-LINGUAL)

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12 AND AS PER IS 4736(UNIFORMITY OF ZINC COATING)	-	500	-
12 AND AS PER IS 4736(MASS OF ZINC COATING)	-	1000	-
6.2 AND AS PER IS 513(NITROGEN)	-	1000	-
6.2 AND AS PER IS 513(MICRO ALLOY)	-	2500	-
6.2 AND AS PER IS 513(ALUMINIUM)	-	1000	-
6.2 AND AS PER IS 513(SILICON)	-	1000	-
6.2 AND AS PER IS 513(MANGANESE)	-	1000	-
6.2 AND AS PER IS 513(PHOSPHORUS)	-	1000	-
6.2 AND AS PER IS 513(SULPHUR)	-	1000	-
6.2 AND AS PER IS 513(CARBON)	-	1000	-
6.2 AND AS PER IS 10748(COPPER)	-	1000	-
6.2 AND AS PER IS 10748(NITROGEN)	-	1000	-
6.2 AND AS PER IS 10748(MICRO ALLOY)	-	2500	-
6.2 AND AS PER IS 10748(ALUMINIUM)	-	1000	-
6.2 AND AS PER IS 10748(SILICON)	-	1000	-
6.2 AND AS PER IS 10748(CARBON EQUIVALENT)	-	2500	-
6.2 AND AS PER IS 10748(MANGANESE)	-	1000	-
6.2 AND AS PER IS 10748(PHOSPHORUS)	-	1000	-
6.2 AND AS PER IS 10748(SULPHUR)	-	1000	-
6.2 AND AS PER IS 10748(CARBON)	-	1000	-
Clause - 6.1.1, Table-1( ALUMINIUM)	-	1000	-
Clause - 6.1.1, Table-1(SILICON)	-	1000	-
Clause - 6.1.1, Table-1(NITROGEN)	-	1000	-
Clause - 6.1.1, Table-1(MANGANESE)	-	1000	-
Clause - 6.1.1, Table-1(PHOSPHURS)	-	1000	-
Clause - 6.1.1, Table-1(SULPHUR)	-	1000	-
Clause - 6.1.1, Table-1( CARBON)	-	1000	-
12 AND AS PER IS 4736(UNIFORMITY OF ZINC COATING)	-	500	-
12 AND AS PER IS 4736(MASS OF ZINC COATING)	-	1000	-
6.2 AND AS PER IS 513(NITROGEN)	-	1000	-
6.2 AND AS PER IS 513(MICRO ALLOY)	-	2500	-
6.2 AND AS PER IS 513(ALUMINIUM)	-	1000	-
6.2 AND AS PER IS 513(SILICON)	-	1000	-
6.2 AND AS PER IS 513(MANGANESE)	-	1000	-
6.2 AND AS PER IS 513(PHOSPHORUS)	-	1000	-
6.2 AND AS PER IS 513(SULPHUR)	-	1000	-
6.2 AND AS PER IS 513(CARBON)	-	1000	-
6.2 AND AS PER IS 10748(COPPER)	-	1000	-
6.2 AND AS PER IS 10748(NITROGEN)	-	1000	-
6.2 AND AS PER IS 10748(MICRO ALLOY)	-	2500	-
6.2 AND AS PER IS 10748(ALUMINIUM)	-	1000	-
6.2 AND AS PER IS 10748(SILICON)	-	1000	-
6.2 AND AS PER IS 10748(CARBON EQUIVALENT)	-	2500	-
6.2 AND AS PER IS 10748(MANGANESE)	-	1000	-
6.2 AND AS PER IS 10748(PHOSPHORUS)	-	1000	-
6.2 AND AS PER IS 10748(SULPHUR)	-	1000	-
6.2 AND AS PER IS 10748(CARBON)	-	1000	-
6.1.1(MANGANESE)	-	1000	-
6.1.1(PHOSPHORUS)	-	1000	-
6.1.1(SULPHUR)	-	1000	-
6.1.1(CARBON)	-	1000	-
Cl. 6.1.1, table1 of IS 1239(Part1)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 6.1.1, table1 of IS 1239(Part1)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 6.1.1, table1 of IS 1239(Part1)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 6.1.1, table1 of IS 1239(Part1)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 15(Workmanship)	-	100	-
Cl. 14.3(Flattening test (Over 50 mm NB))	-	500	-
Cl. 14.2(Bend Test (uto and including 50 mm NB))	-	500	-
Cl. 14.1.1(Elongation)	-	500	-
Cl. 14.1(Tensile Strength)	-	500	-
Cl. 3.3, 10.2(Plain End)	-	100	-
Cl. 11(Length)	-	100	-
Cl. 8, 9 Table 3,4 & 5(Mass of Tube)	-	200	-
Cl. 6.5(Height of Internal Fin)	-	100	-
Cl. 8, 9 Table 3,4 & 5(Thickness)	-	100	-
Cl. 8 Table 3,4 & 5(Outside Diameter)	-	500	-
Clause 14.1.1(Elongation Percent)	-	500	-
Clause 11.3(Approximate Length)	-	100	-
Clause 11.2(Exact Length)	-	100	-
Clause 11.1(Random Length)	-	100	-
Clause 8.1 (Table3,4,5)(Nominal Bore )	-	100	-
Cl 15(Workmanship)	-	100	-
Cl 14(Tensile Test, Flattening Test & Bend Test)	-	2000	-
Cl 12(Workmanship)	-	100	-
Cl 10.1.1(Manufacturing )	-	0	-
Cl 10.1(Manufacturing )	-	0	-
Cl 8(Outer Diameter, Thickness & Mass)	-	800	-
17(Marking)	-	100	-
cl.17(MARKING)	-	100	-
6.2(Carbon Equivalent as CE- IS:8811-98(RA12))	-	2500	-
CL 08 & 09("1.Outer dia (04) 2.Thickness (08)")	-	1000	-
CL 08 & 09(Minimum Outer dia (04))	-	500	-
CL 08 & 09(" Minimum Thickness (08)")	-	100	-
CL 08 & 09(Maximum Thickness (08))	-	100	-
CL 08 & 09(Maximum Outer dia (04))	-	100	-

08 May, 2028

-
Included w.e.f.01.09.2025

3924

National Test House (WR) - NTH, Mumbai

7107604

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

28000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.2 Table -2 (Nominal Mass)	-	1000	-
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-	1000	-
Cl. 8.1 Table 3(Tensile Strength (TS))	-	1000	-
Cl. 8.1 Table 3(Yield Stress (YS))	-	1000	-
Cl. 8.1 Table 3(Elongation, percentage)	-	1000	-
8.18.1 Table 3(Total elongation at maximum force)	-	1000	-
Cl. 8.1 Table 3(TS/YS Ratio)	-	500	-
Cl. 9.3, Table 4(Bend Test )	-	1500	-
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	1500	-
5.7(PullOut (Bond Test))	-	15000	-
4.1(Carbon %)	-	500	-
4.1(Manganese %)	-	500	-
4.1(Silicon %)	-	500	-
4.1(Sulphur %)	-	500	-
4.1(Phosphorus %)	-	500	-
4.1(Sulphur and phosphorous)	-	500	-
4.1( Aluminium %)	-	500	-
4.1( Copper %)	-	500	-
4.1( Nitrogen%)	-	500	-
4.1(CE)	-	500	-
Clause 4.2 Note 2, Amendment 1 & 3(Nb+V+B+Ti)	-	500	-
Clause 4.2 Note 3, Amendment 1 & 3(Cr+Cu+Ni+Mo+P)	-	500	-

24 Jul, 2025

-
-

3925

National Test House (WR) - NTH, Mumbai

7107604

IS 3589 (2001)

Steel pipes for water and sewage (168.3 To 2540 Mm Outside Diameter) - Specification (Third Revision)

Fe330, Fe410, Fe450 Size 168.3mm to 2540mm Dia

11500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.1(Tensile test-Yield Strength)	-	3000	-
9.1(Tensile test-Strength)	-	3000	-
9.1(Tensile test- Elongation)	-	3000	-
14.1(Visual inspection, Appearance and Workmanship)	-	1000	-
14.2(Visual inspection, Appearance and Workmanship)	-	1000	-
14.3(Visual inspection, Appearance and Workmanship)	-	1000	-
14.4(Visual inspection, Appearance and Workmanship-Dent Depth(below 610 mm OD))	-	1000	-
14.4(Visual inspection, Appearance and Workmanship-Dent Depth(Above 610 mm OD))	-	1000	-
14.4(Visual inspection, Appearance and Workmanship-Dent Length)	-	1000	-
9.3(Guided bend test(For SAW Pipes))	-	1000	-
10(Hydaulic pressure test)	-	1000	-
11.1, Table 5.(Outside Diameter (OD))	-	1000	-
11.1, Table 5.(Thickness)	-	1000	-
11.1, Table 5.(Mass)	-	1000	-
12.3.3(Ovality)	-	1000	-
12.5(Strightness)	-	1000	-
9.2.1(Flattening test for ERW pipes )	-	1000	-
9.2.3(Flattening Test for seamless pipes)	-	1000	-
8.1 Table 2 Table 3(Carbon Content IS 228)	-	500	-
8.1 Table 2 Table 3(Manganese Content IS 228)	-	500	-
8.1 Table 2 Table 3(Sulphur Content IS 228)	-	500	-
8.1 Table 2 Table 3(Phosphorus Content IS 228)	-	500	-
8.1(CE)	-	500	-

24 Jul, 2025

-
-

3926

National Test House (WR) - NTH, Mumbai

7107604

IS 1161 (2014)

Steel tubes for structural purposes - Specification (Fifth Revision)

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Outer Diameter - SOP MT-23)	-	1000	-
Cl. 6 , 6.2 Table 1(Thickness)	-	1000	-
Cl. 6 , 6.2 Table 1(Weight)	-	1000	-
9(Straightness)	-	1000	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	3000	-
13.0(Oiling and Painting - Visual)	-	1000	-
Cl 11.3.1(Cold bend test (upto & including 50 mm NB))	-	1000	-
Cl 11.3.1(Flattening test (over 50 mm NB))	-	1000	-
10(Lengths)	-	1000	-
Cl 7(Workmanship)	-	500	-
Cl 8(Workmanship)	-	500	-
Cl 9(Workmanship)	-	500	-
Cl 13(Workmanship)	-	1000	-
Cl. 11.2 Table 2(Yield strength)	-	1000	-
Cl. 11.2 Table 2(Elongation)	-	1000	-
8.0(Mass of Zinc coating - IS:6745)	-	1500	-
8.0(Uniformity of galvanized coating - IS 4736)	-	1500	-
8.0(Adhesion test-Pivoted Hammer Test - IS 4736)	-	1500	-
Clause - 5.1, Table-3( CARBON)	-	500	-
Clause - 5.1, Table-3(MANGANESE)	-	500	-
Clause - 5.1, Table-3(SILICON)	-	500	-
Clause - 5.1, Table-3(SULPHUR)	-	500	-
Clause - 5.1, Table-3(PHOSPHURS)	-	500	-
Clause - 5.1, Table-3( ALUMINIUM)	-	500	-
5 AND AS PER IS 10748(CARBON EQUIVALENT)	-	500	-
5 AND AS PER IS 10748(COPPER)	-	500	-
5 AND AS PER IS 10748(MICRO ALLOY)	-	500	-

24 Jul, 2025

-
-

3927

National Test House (WR) - NTH, Mumbai

7107604

IS 513 : Part 1 (2016)

Cold reduced carbon steel sheet and strip: Part 1 cold forming and drawing purpose (Sixth Revision)

Genral Purpose CR0, 1,2,3,4,5 and all new designations

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.0(ALUMINIUM)	-	500	-
7.0(MICRO ALLOYS)	-	500	-
7.0(NITROGEN)	-	500	-
7.0(SILICON)	-	500	-
7.0(MANGANESE)	-	500	-
7.0(PHOSPHORUS)	-	500	-
7.0(SULPHUR)	-	500	-
7.0(CARBON)	-	500	-
Cl 9(Workmanship)	-	500	-
Cl 8(UTM)	-	3000	-
Cl 11(Length, Width & Thickness)	-	1000	-
Cl 9.6(Workmanship)	-	500	-
Cl 10(Workmanship)	-	500	-
Cl. 8.7(Bake Hardening Index)	-	3000	-
Cl. 8.6 Table 5A, 5B & 5C(Tensile Strain Hardening Component (n-Value))	-	3000	-
Cl. 8.5 Table 5A, 5B & 5C(Plastic Strain Ratio (r bar/r-90))	-	3000	-
Cl. 8.4(Bend Test)	-	1500	-
Cl. 8.3 Table 6(Hardness Test ( Only for CR0 & CR1))	-	2000	-
Cl. 8.2(Cupping Test(Only for sheet and coils CR2, CR3, CR4(having thickness 0.5 mm-2.0 mm))	-	1500	-
Cl. 8.1 & Table 5A, 5B & 5C(Elongation at 80 mm gauge length)	-	1000	-
Cl. 8.1 & Table 5A, 5B & 5C(Elongation at 50 mm gauge length)	-	1000	-
Cl. 8.1 & Table 5A, 5B & 5C(Yield Stress)	-	1000	-

24 Jul, 2025

-
-

3928

National Test House (WR) - NTH, Mumbai

7107604

IS 14846 (2000)

Sluice valve for water works purposes (50 To 1200 mm size) - specification

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.2.1(Manufacture - Bodies and Bonnets)	-	500	-
7.5(Guides and Lugs)	-	500	-
7.7.2(Stem and Wedge Nuts)	-	500	-
7.7.3(Stem and Wedge Nuts)	-	500	-
7.7.4(Stem and Wedge Nuts)	-	500	-
7.3 Table 3A 1(Flanges)	-	2000	-
7.4.1(Wedges)	-	1000	-
7.7.1 Table 2,3(Dimension of Stem and Wedge Nuts)	-	2000	-
9(Coating)	-	500	-
10.1 Annex B-1(Hydraulic Test)	-	5000	-
10.1 Annex B-2(Hydraulic Test)	-	5000	-
10.2(Flaw Detection Test for Stems)	-	2500	-

24 Jul, 2025

-
-

3929

National Test House (WR) - NTH, Mumbai

7107604

IS 1239 : Part 1 (2004)

Steel Tubes, Tubulars and Other Wrought Steel Fittings : Part 1 Steel Tubes (BI-LINGUAL)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 15(Workmanship)	-	1000	-
Cl. 14.3(Flattening test (Over 50 mm NB))	-	1000	-
Cl. 14.2(Bend Test (uto and including 50 mm NB))	-	1000	-
Cl. 14.1.1(Elongation)	-	3000	-
Cl. 14.1(Tensile Strength)	-	3000	-
Cl. 3.3, 10.2(Plain End)	-	1000	-
Cl. 11(Length)	-	1000	-
Cl. 8, 9 Table 3,4 & 5(Mass of Tube)	-	1000	-
Cl. 6.5(Height of Internal Fin)	-	1000	-
Cl. 8, 9 Table 3,4 & 5(Thickness)	-	1000	-
Cl. 8 Table 3,4 & 5(Outside Diameter)	-	1000	-
Clause 14.1.1(Elongation Percent)	-	3000	-
Clause 11.3(Approximate Length)	-	1000	-
Clause 11.2(Exact Length)	-	1000	-
Clause 11.1(Random Length)	-	1000	-
Clause 8.1 (Table3,4,5)(Nominal Bore )	-	1000	-
12 AND AS PER IS 4736(UNIFORMITY OF ZINC COATING)	-	1500	-
12 AND AS PER IS 4736(MASS OF ZINC COATING)	-	1500	-
Clause - 6.1.1, Table-1( CARBON)	-	500	-
Clause - 6.1.1, Table-1(MANGANESE)	-	500	-
Clause - 6.1.1, Table-1(SULPHUR)	-	500	-
Clause - 6.1.1, Table-1(PHOSPHURS)	-	500	-

24 Jul, 2025

-
-

3930

National Test House (NWR) - NTH, Jaipur

8122904

IS 3812 (Part 1) (2013)

Pulverized fuel ash - Specification: Part 1 For use as pozzolana in cement, cement mortar and concrete

Siliceous/ Calcareous

13500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1-Table 2(ii)(PHYSICAL REQUIREMENTS-Particles retained on 45 micron IS sieve)	-	2000	--
7.1-Table 2(v)(PHYSICAL REQUIREMENTS-Soundness by autoclave test )	-	2000	--
7.1-Table 2(iv)(PHYSICAL REQUIREMENTS-Compressive strength at 28 days)	-	3000	--
7.1-Table 2(i)(PHYSICAL REQUIREMENTS-Fineness)	-	1000	--
Cl. 6.1, Table 1 - i(Silicon dioxide (SiO2) plus aluminium oxide (Al2O3) plus ironoxide (Fe2O3) - IS 1727)	-	500	-
Cl. 6.1, Table 1 - ii(Silicon dioxide (SiO2) - IS 1727)	-	500	-
Cl. 6.1, Table 1 - iii(Reactive Silica - Annex B)	-	500	-
Cl. 6.1, Table 1 - iv(Magnesium oxide (MgO) - IS 1727)	-	500	-
Cl. 6.1, Table 1 - v( Total sulphur as sulphur trioxide (SO3) - IS 1727)	-	500	-
Cl. 6.1, Table 1 - vi( Available alkalis as equivalent sodium oxide (Na2O) - Annex C)	-	2000	-
Cl. 6.1, Table 1 - vii( Total Chlorides - IS 4032)	-	500	-
Cl. 6.1, Table 1 - viii( Loss on ignition - IS 1727)	-	500	-
Cl. 6.2(Moisture content of the fly ash when supplied in dry condition - Annex D)	-	500	-
5.1, 7.1, table-2, iii(Lime reacitivity)	-	2500	-

31 Dec, 2026

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number