BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15393 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

3871

AADIDEV TEST & RESEARCH CENTRE LLP

8194926

IS 398 : Part 4 (1994)

Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Freedom from Defects)	-	500	-
7.1 Table-1(Dimensional measurement of wires)	-	1000	-
7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor)	-	1500	-
8.1(Joints in wires-Conductors Containing Seven Wires)	-	500	-
8.2(Joints in wires-Conductors Containing More Than Seven Wires)	-	500	-
9.1(Stranding)	-	500	-
9.2 Table 3(Lay Ratio of stranded conductors)	-	1000	-
9.3(Direction of Lay)	-	500	-
9.4(Multiple layers of wires)	-	500	-
11(Packing and Marking)	-	0	-
12.2 Table 1(Breaking Load Test- Before Stranding)	-	1500	-
12.2 Table 1(Breaking Load Test- After Stranding)	-	1500	-
12.3 Table 1(Elongation Test- Before Stranding)	-	1000	-
12.3 Table 1(Elongation Test- After Stranding)	-	1000	-
12.4 Table 1(Resistance of Aluminium wire)	-	1000	-
9.2(Lay Ratio 24 wire layer)	-	1000	-
9.2(Lay Ratio 18 wire layer)	-	1000	-
9.2(Lay Ratio 12 wire layer)	-	1000	-
9.2(Lay Ratio 3/6 wire layer)	-	1000	-
7.2.1(Sizes)	-	0	-
Cl-7.2 (7.2.1, 7.2.2), Table-2(Stranding and Wire Dia)	-	500	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Overall Dia)	-	500	-
Cl. 7.2 (7.2.1, 7.2.2), Table 2(Approx Mass)	-	500	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Calculated Maximum Resistance at 20°C)	-	2000	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Calculated Breaking Load)	-	2000	-

29 Dec, 2028

-
-

3872

AADIDEV TEST & RESEARCH CENTRE LLP

8194926

IS 398 : Part 1 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	800	-
12.3, Table-1(Breaking load before stranding)	-	1500	-
12.3, Table-1(Breaking load after stranding)	-	1500	-
12.4(Wrapping test)	-	500	-
12.5, Table 1(Resistance test)	-	1500	-
12.6, Table 3(Measurement of lay ratio)	-	500	-
9.3(Stranding)	-	500	-
6(Freedom from defects)	-	800	-
7.2.1(Sizes)	-	500	-
8, 8.1, 8.2(Joint in wires, except during stranding)	-	500	-
9.2(Lay ratio)	-	1000	-
9.4(Multiple layer of wires)	-	500	-
4.1(Resistivity)	-	1000	-
4.2(Density)	-	0	-
4.3(Constant-Mass Temperature Coefficient of Resistance)	-	0	-
4.4(Coefficient of Linear Expansion)	-	0	-
5(Material)	-	0	-
7.1.1(Nominal Sizes)	-	800	-
7.2.2(Resistance)	-	1000	-

29 Dec, 2028

-
-

3873

Central institute of Petrochemicals Engineering & Technology (CIPET), Raipur

5163604

IS 13487 (2024)

Irrigation Equipment — Emitters — Specification

Uniformity Category -A , Uniformity Category -B

4575.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Connections)	-	500.00	For BIS 4575/- and for Other 6100/- GST Extra
Cl-5.2(Emitter Ends)	-	500.00	GST Extra
Cl-5.3(Materials)	-	2425.00	(Optional ) Material Test and GST Extra
Cl-6.1(Test Specimens)	-	500.00	GST Extra
Cl-6.2.1(polyethylene pipe)	-	0.00	Already added clause no 6.1
Cl-6.2.2("grease or chemicals ")	-	0.00	Already added clause no 6.1
Cl-6.2.3(water temperature)	-	0.00	Already added clause no 6.1
Cl-6.3(Accuracy or Measuring Devices)	-	0.00	-
Cl-7.1(Construction and Workmanship)	-	500.00	GST EXTRA
Cl-7.2(Flow Paths in Emitter)	-	500.00	GST EXTRA
Cl-7.3(Resistance to Hydrostatic Pressure)	-	1000.00	GST EXTRA
Cl-7.4(Emitter Pull-Out)	-	500.00	GST EXTRA
Cl-7.4.1(In-Line Emitters)	-	0.00	GST EXTRA
Cl-7.4.2(On-Line Emitters)	-	0.00	GST EXTRA
Cl-8.1.1(Uniformity of Emission Rate)	-	1000.00	GST EXTRA
Cl-8.1.2(Emission Rate as Function of Inlet Pressure)	-	1000.00	GST EXTRA
Cl-8.1.3(Determination of Emitter Exponent)	-	600.00	GST EXTRA
Cl-9(Marking)	-	0.00	-

25 Apr, 2028

-
Included w.e.f.22.07.2025

3874

Samridhi Test House Pvt. Ltd.

8184706

IS 15225 (2002)

Chlorinated polyvinyl chloride compounds used for pipes and fittings - Specifications

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Designation)	-	500	-
4.2.1(Data block 1)	-	500	-
4.2.2(Data block 2)	-	500	-
4.2.3, Table1(Data block 3)	-	500	-
4.2.4, table 2(Data block 4)	-	500	-
4.2.5, table 3(Data block 5)	-	500	-
4.2.6(Data block 6)	-	500	-
8.1.1(Resin k-value)	-	1000	-
8.1.2(Resin chlorine content)	-	4000	-
8.1.3(Form)	-	200	-
8.1.4(Compound chlorine content)	-	4000	-
8.1.5(Appearance)	-	200	-
8.2.1(Vicat softening temperature)	-	1700	-
8.2.2(Charpy impact strength)	-	1700	-
8.2.3(Tensile strength)	-	1700	-
8.2.4(Tensile modulus)	-	1700	-
8.3(Ash content)	-	900	-
4(Designation)	-	0	-
4.2.1(Data block 1)	-	0	-
4.2.2(Data block 2)	-	0	-
4.2.3, Table1(Data block 3)	-	0	-
4.2.4, table 2(Data block 4)	-	0	-
4.2.5, table 3(Data block 5)	-	0	-
4.2.6(Data block 6)	-	0	-
8.1.1(Resin k-value)	-	0	-
8.1.2(Resin chlorine content)	-	0	-
8.1.3(Form)	-	0	-
8.1.4(Compound chlorine content)	-	0	-
8.1.5(Appearance)	-	0	-
8.2.1(Vicat softening temperature)	-	0	-
8.2.2(Charpy impact strength)	-	0	-
8.2.3(Tensile strength)	-	0	-
8.2.4(Tensile modulus)	-	0	-
8.3(Ash content)	-	0	-
4(Designation)	-	0	-
4.2.1(Data block 1)	-	0	-
4.2.2(Data block 2)	-	0	-
4.2.3, Table1(Data block 3)	-	0	-
4.2.4, table 2(Data block 4)	-	0	-
4.2.5, table 3(Data block 5)	-	0	-
4.2.6(Data block 6)	-	0	-
8.1.1(Resin k-value)	-	0	-
8.1.2(Resin chlorine content)	-	0	-
8.1.3(Form)	-	0	-
8.1.4(Compound chlorine content)	-	0	-
8.1.5(Appearance)	-	0	-
8.2.1(Vicat softening temperature)	-	0	-
8.2.2(Charpy impact strength)	-	0	-
8.2.3(Tensile strength)	-	0	-
8.2.4(Tensile modulus)	-	0	-
8.3(Ash content)	-	0	-

-
Included w.e.f. 14.08.2025

3875

Vimta Labs Limited (6132436), Hyderabad

6132436

IS 17566 (2021)

Key locks for security Equipment-Specification

200000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CLAUSE NO-5(CONSTRUCTION)	-	15000	-
"CLAUSE NO-6 TABLE NO -1 (i)"(Body of lock, Bolts, Stump)	-	15000	-
"CLAUSE NO-6 TABLE NO -1 (ii)"(Lock lever)	-	15000	-
"CLAUSE NO-6 TABLE NO -1 (iii)"(Lever springs)	-	15000	-
"CLAUSE NO-6 TABLE NO -1(iv)"(Keys)	-	15000	-
CLAUSE NO -8.1(Endurance Test)	-	100000	-
CLAUSE NO -8.2(Bolt forcing test)	-	20000	-
CLAUSE NO -8.3(Salt Spray Corrosion Test)	-	30000	-
CLAUSE NO -8.4(Key Strength Test)	-	10000	-
CLAUSE NO -9(Marking)	-	5000	-
CLAUSE NO-5(CONSTRUCTION)	-	15000	-
"CLAUSE NO-6 TABLE NO -1 (i)"(Body of lock, Bolts, Stump)	-	15000	-
"CLAUSE NO-6 TABLE NO -1 (ii)"(Lock lever)	-	15000	-
"CLAUSE NO-6 TABLE NO -1 (iii)"(Lever springs)	-	15000	-
"CLAUSE NO-6 TABLE NO -1(iv)"(Keys)	-	15000	-
CLAUSE NO -8.1(Endurance Test)	-	100000	-
CLAUSE NO -8.2(Bolt forcing test)	-	20000	-
CLAUSE NO -8.3(Salt Spray Corrosion Test)	-	30000	-
CLAUSE NO -8.4(Key Strength Test)	-	20000	-
CLAUSE NO -9(Marking)	-	5000	-
CLAUSE NO-5(CONSTRUCTION)	-	15000	-
"CLAUSE NO-6 TABLE NO -1 (i)"(Body of lock, Bolts, Stump)	-	15000	-
"CLAUSE NO-6 TABLE NO -1 (ii)"(Lock lever)	-	15000	-
"CLAUSE NO-6 TABLE NO -1 (iii)"(Lever springs)	-	15000	-
"CLAUSE NO-6 TABLE NO -1(iv)"(Keys)	-	15000	-
CLAUSE NO -8.1(Endurance Test)	-	100000	-
CLAUSE NO -8.2(Bolt forcing test)	-	20000	-
CLAUSE NO -8.3(Salt Spray Corrosion Test)	-	30000	-
CLAUSE NO -8.4(Key Strength Test)	-	20000	-
CLAUSE NO -9(Marking)	-	5000	-
CLAUSE NO-5(CONSTRUCTION)	-	15000	-
"CLAUSE NO-6 TABLE NO -1 (i)"(Body of lock, Bolts, Stump)	-	15000	-
"CLAUSE NO-6 TABLE NO -1 (ii)"(Lock lever)	-	15000	-
"CLAUSE NO-6 TABLE NO -1 (iii)"(Lever springs)	-	15000	-
"CLAUSE NO-6 TABLE NO -1(iv)"(Keys)	-	15000	-
CLAUSE NO -8.1(Endurance Test)	-	100000	-
CLAUSE NO -8.2(Bolt forcing test)	-	20000	-
CLAUSE NO -8.3(Salt Spray Corrosion Test)	-	30000	-
CLAUSE NO -8.4(Key Strength Test)	-	10000	-
CLAUSE NO -9(Marking)	-	5000	-
CLAUSE NO-5(CONSTRUCTION)	-	15000	-
"CLAUSE NO-6 TABLE NO -1 (i)"(Body of lock, Bolts, Stump)	-	15000	-
"CLAUSE NO-6 TABLE NO -1 (ii)"(Lock lever)	-	15000	-
"CLAUSE NO-6 TABLE NO -1 (iii)"(Lever springs)	-	10000	-
"CLAUSE NO-6 TABLE NO -1(iv)"(Keys)	-	10000	-
CLAUSE NO -8.1(Endurance Test)	-	100000	-
CLAUSE NO -8.2(Bolt forcing test)	-	10000	-
CLAUSE NO -8.3(Salt Spray Corrosion Test)	-	30000	-
CLAUSE NO -8.4(Key Strength Test)	-	15000	-
CLAUSE NO -9(Marking)	-	5000	-

25 Oct, 2027

-
Included w.e.f 04.11.2025

3876

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 330 (2023)

CHROMIUM TRIOXIDE - SPECIFICATION Third Revision

4430 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4.1 (Description)	-
Cl-4.2 (Solubility)	-
Cl-4.3, 4.4 Table-1 (i) (Chromium trioxide (as CrO3), percent by mass, Min)	-
Cl-4.3, 4.4 Table-1 (ii) (Matter insoluble in water, percent by mass, Max)	-
Cl-4.3, 4.4 Table-1 (iii) (Sulphates (as SO4), percent by mass, Max)	-
Cl-4.3, 4.4 Table-1 (iv) (Alkali salts (as Na2O), percent by mass, Max)	-
Cl-4.3, 4.4 Table-1 (v) (Chlorides (as Cl), percent by mass, Max)	-
Cl-4.3, 4.4 Table-1 (vi) (Nitrates (as NO2), percent by mass, Max)	-
Cl-4.4, Table-2 (ii) (Iron (as Fe), percent by mass, Max)	-

-
-

3877

Advance Firetec and Research Lab Pvt. Ltd

8176606

IS 903 (2025)

Fire Hose Delivery Couplings, Branch Pipe, Nozzles and Nozzle Spanner - Specification (Fifth Revision)

FIRE HOSE DELIVERY COUPLINGS, BRANCH PIPE, NOZZLES AND NOZZLE SPANNER

43400.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 5.2, 6.2, 7.2, 10.2(Dimensions & Tolerances)	-	18000.00	Separately for Cl. No. 5.2 as per Fig. 2A & 2B - 6000.00 / For Cl. No. 6.2 as per Fig. 3 - 4000.00 / For Cl. No. 7.2 as per Fig. 4 - 4000.00 / For Cl. No. 10.2 as per Fig. 5 - 4000.00.
As per Clause 9.1(Hydraulic test)	-	18000.00	Separately for Delivery Coupling (Cl. No. 5.4) - 6000.00 / For Branch Pipe (Cl. No. 6.4) - 6000.00 / and For Nozzles (Cl. No. 7.4) - 6000.00.
As per Clause 10.4(Deflection test requirement)	-	4000.00	-
Cl. 10.4(Deflection test requirement)	-	0.0	Repeated One.
Cl. 4(WORKMANSHIP AND FINISH)	-	2000.00	Separately for Delivery Coupling - 500.00 / For Branch Pipe - 500.00 / For Nozzles - 500.00 / and For Nozzle Spanner - 500.00.
Cl. 5("INSTANTANEOUS DELIVERY HOSE COUPLINGS")	-	0.0	-
Cl. 5.1(Design)	-	200	As per Fig. 1.
Cl. 5.4(Testing)	-	0.0	Repeated One.
Cl. 6(BRANCH PIPE)	-	0.0	-
Cl. 6.4(Testing)	-	0.0	Repeated One.
Cl. 7(NOZZLES)	-	0.0	-
Cl. 7.4(Testing)	-	0.0	Repeated One.
Cl. 9.1(PERFORMANCE TEST)	-	0.0	Repeated One.
Cl. 9.1(Hydraulic Test)	-	0.0	Repeated One.
Cl. 10(NOZZLE SPANNER)	-	0.0	-
Cl. 11(MARKING)	-	800.00	Separately for Delivery Coupling - 200.00 / For Branch Pipe - 200.00 / For Nozzles - 200.00 / and For Nozzle Spanner - 200.00.
Cl-4(Workmanship and Finish)	-	0.0	Repeated One.
Cl-5.4(DELIVERY HOSE COUPLINGS- Hydraulic test)	-	0.0	Repeated One.
Cl-6.1(BRANCH PIPE -Design)	-	200	As per Fig. 3 .
Cl-6.4(BRANCH PIPE -Hydraulic test)	-	0.0	Repeated One.
Cl-7.1(NOZZLES -Design)	-	200.00	As per Fig. 4.
Cl-7.4(NOZZLES -Hydraulic test)	-	0.0	Repeated One.
Cl-10.3(NOZZLE SPANNER - Anti-corrosive treatment)	-	0.0	-

03 Mar, 2027

-
Included w.e.f.22.07.2025 Exclusion Cl. 5.3 (Materials) Cl. 6.3 (Materials) Cl. 7.3 (Materials) Cl. 8 (Materials) Cl-10.1 (NOZZLE SPANNER - Material)

3878

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET) : IPT-BHUBANESWAR

5102634

IS 12786 (2024)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification (first revision)

Class of Pipe (based on Working Pressure) :1,2 or 3

14413 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Material)	-	6044	-
Cl-4.2(Carbon content of finished PE lateral pipe)	-	1219	-
Cl-5.1(Dimensions of pipes and wall thicknesses)	-	375	-
Cl-6.0(Visual Appearance)	-	375	-
Cl-7.1(Hydraulic Characteristics- Internal pressure creep rupture test)	-	750	-
Cl-7.1(Hydraulic Characteristics- quality acceptance test)	-	2250	-
Cl-7.2(Reversion Test)	-	1025	-
Cl-7.3(Tensile Test)	-	1475	-
Cl-7.3.1(Test Piece)	-	0	-
Cl-7.3.2(Procedure)	-	0	-
Cl-7.4(Susceptibility to Environmental Stress Cracking)	-	900	-
Cl-8.0(Supply of pipes)	-	0	-
Cl-9.0(Coiling)	-	0	-
Cl-10.0(Sampling and criteria for conformity)	-	0	-
Cl-11(Marking)	-	0	-
5.1 & Table 1(Dimensions of Pipes - Outside diameters)	-	0	-
5.1 & Table 1(Dimensions of Pipes - Wall thickness)	-	0	-
6(Visual Appearance)	-	0	-
7.1 & Table 2(Hydraulic Characteristics)	-	0	-
7.1 & Table 2(Hydraulic Characteristics)	-	0	-
7.2(Reversion Test)	-	0	-
7.3(Tensile Strength)	-	0	-
7.3(Elongation at Break)	-	0	-
7.4(SusceptibiIity to Environmental Stress Cracking)	-	0	-
4.2(a)(Carbon Black Content-IS 2530)	-	0	-
4.2(b)(Carbon Black Dispersion-IS 2530)	-	0	-
3(Class of Pipe)	-	0	-
Cl-4.1(Material)	-	0	-
Cl-4.2(Carbon content of finished PE lateral pipe)	-	0	-
Cl-5.1(Dimensions of pipes and wall thicknesses)	-	0	-
Cl-6.0(Visual Appearance)	-	0	-
Cl-7.1(Hydraulic Characteristics- Internal pressure creep rupture test)	-	0	-
Cl-7.1(Hydraulic Characteristics- quality acceptance test)	-	0	-
Cl-7.2(Reversion Test)	-	0	-
Cl-7.3(Tensile Test)	-	0	-
Cl-7.3.1(Test Piece)	-	0	-
Cl-7.3.2(Procedure)	-	0	-
Cl-7.4(Susceptibility to Environmental Stress Cracking)	-	0	-
Cl-8.0(Supply of pipes)	-	0	-
Cl-9.0(Coiling)	-	0	-
Cl-10.0(Sampling and criteria for conformity)	-	0	-
Cl-11(Marking)	-	0	-
5.1 & Table 1(Dimensions of Pipes - Outside diameters)	-	0	-
5.1 & Table 1(Dimensions of Pipes - Wall thickness)	-	0	-
6(Visual Appearance)	-	0	-
7.1 & Table 2(Hydraulic Characteristics)	-	0	-
7.1 & Table 2(Hydraulic Characteristics)	-	0	-
7.2(Reversion Test)	-	0	-
7.3(Tensile Strength)	-	0	-
7.3(Elongation at Break)	-	0	-
7.4(SusceptibiIity to Environmental Stress Cracking)	-	0	-
4.2(a)(Carbon Black Content-IS 2530)	-	0	-
4.2(b)(Carbon Black Dispersion-IS 2530)	-	0	-
3(Class of Pipe)	-	0	-
Cl-4.1(Material)	-	0	-
Cl-4.2(Carbon content of finished PE lateral pipe)	-	0	-
Cl-5.1(Dimensions of pipes and wall thicknesses)	-	0	-
Cl-6.0(Visual Appearance)	-	0	-
Cl-7.1(Hydraulic Characteristics- Internal pressure creep rupture test)	-	0	-
Cl-7.1(Hydraulic Characteristics- quality acceptance test)	-	0	-
Cl-7.2(Reversion Test)	-	0	-
Cl-7.3(Tensile Test)	-	0	-
Cl-7.3.1(Test Piece)	-	0	-
Cl-7.3.2(Procedure)	-	0	-
Cl-7.4(Susceptibility to Environmental Stress Cracking)	-	0	-
Cl-8.0(Supply of pipes)	-	0	-
Cl-9.0(Coiling)	-	0	-
Cl-10.0(Sampling and criteria for conformity)	-	0	-
Cl-11(Marking)	-	0	-
5.1 & Table 1(Dimensions of Pipes - Outside diameters)	-	0	-
5.1 & Table 1(Dimensions of Pipes - Wall thickness)	-	0	-
6(Visual Appearance)	-	0	-
7.1 & Table 2(Hydraulic Characteristics)	-	0	-
7.1 & Table 2(Hydraulic Characteristics)	-	0	-
7.2(Reversion Test)	-	0	-
7.3(Tensile Strength)	-	0	-
7.3(Elongation at Break)	-	0	-
7.4(SusceptibiIity to Environmental Stress Cracking)	-	0	-
4.2(a)(Carbon Black Content-IS 2530)	-	0	-
4.2(b)(Carbon Black Dispersion-IS 2530)	-	0	-
3(Class of Pipe)	-	0	-

31 Dec, 2026

-
Included w.e.f.31.07.2025

3879

Atckon Laboratories LLP, Bahadurgarh

8186436

IS 2185 : Part 1 (2005)

Concrete masonry units - Specification: Part 1 hollow and solid concrete blocks (Third Revision)

ALL

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.1(PHYSICAL REQUIREMENTS-General)	-	1000	-
9.2 & 4.2(PHYSICAL REQUIREMENTS-Nominal Dimensions 1.Length 2.Hight 3. Width)	-	1000	-
9.2 & 4.2.3(Nominal Dimensions-variation in the length of units )	-	1000	-
9.2 & 4.2.3(Nominal Dimensions -variation in height and width of units )	-	1000	-
9.2 & 4.2.4, Table-1(Nominal Dimensions-thickness of the face shell)	-	2000	-
9.2 & 4.2.4, Table-1(Nominal Dimensions-thickness of the Web shell)	-	2000	-
9.3 & 5.1 & 5.2 Table 2(PHYSICAL REQUIREMENTS-Blocks Density - 1.Hollow (Open and Closed Cavity) Concrete Block- Grade Aor Grade B 2.Solid Concrete Block — Grade C)	-	2000	-
9.4- Table 2(PHYSICAL REQUIREMENTS - Compressive Strength 1.Minimum Average Compressive Strength of Units 2.Minimum Average Compressive Strength of Individual Unit)	-	2000	-
9.5(PHYSICAL REQUIREMENTS -Water Absorption)	-	1000	-
9.6(PHYSICAL REQUIREMENTS -Drying Shrinkage)	-	1000	-
9.7(PHYSICAL REQUIREMENTS -Moisture Movement)	-	1000	-
15(Marking)	-	0	-

19 Jun, 2028

-
Included w.e.f 22.07.2025

3880

ATCC TEST LABS LLP

8172626

IS 14927 : Part 2 (2001)

Cable Trunking and Ducting Systems for Electrical Installations : Part 2 Cable Trunking and Ducting Systems Intended for Mounting on Walls or Ceiling

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	500	-
7.1(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7.1(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7.1(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7.1(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7.2(Marking (as per Cl 7.2 of IS:14927(Pt-I ):2001))	-	0	-
8.1( Dimensions (As per cl.8.1 of IS 14927(Pt-1) : 2001))	-	500	-
8.2(Dimensions (As per cl.8.2 of IS 14927(Pt-1) : 2001)	-	0	-
8.3, table 2( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
8.3, table 2( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
8.3, table 2( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
9.1(Construction ( As per Cl. 9.1 of IS 14927(Pt-1):2001))	-	500	-
9.1(Construction)	-	0	-
9.2(Construction ( As per Cl. 9.2 of IS 14927(Pt-1):2001))	-	0	-
9.2(Construction ( As per Cl. 9.2 of IS 14927(Pt-1):2001))	-	0	-
9.2(Construction ( As per Cl. 9.2 of IS 14927(Pt-1):2001))	-	0	-
9.2(Construction ( As per Cl. 9.2 of IS 14927(Pt-1):2001))	-	0	-
9.3(Construction ( As per Cl. 9.3 of IS 14927(Pt-1):2001))	-	0	-
9.3.1(Construction ( As per Cl. 9.3.1 of IS 14927(Pt-1):2001))	-	500	-
9.3.2, table 3(Construction ( As per Cl. 9.3.2, Table-3 of IS 14927(Pt-1):2001))	-	0	-
9.4.1(Construction [Access to Live Parts (As per Cl. 9.4.1 of IS 14927(Pt-1):2001)])	-	0	-
9.5(Construction (As per Cl. 9.5 of IS 14927(Pt-1):2001))	-	0	-
9.6.2(Construction [Membranes (As per Cl.9.6.2 of IS: 14927 (Pt-1):2001)])	-	500	-
9.6.4(Construction [Membranes (As per Cl.9.6.4 of IS: 14927 (Pt-1):2001)])	-	0	-
9.7.2, table 4(Construction [Glands (As per Cl.9.7.2 and Table-4 of IS: 14927 (Pt-1):2001)] )	-	0	-
10(Mechanical Properties )	-	500	-
10.2(Cable supporting test for Surface mounting (As per Cl.10.2))	-	500	-
10.2(Cable supporting test for Surface mounting (As per Cl.10.2))	-	0	-
10.2(Cable supporting test for Surface mounting (As per Cl.10.2))	-	0	-
10.2(Cable supporting test for Surface mounting (As per Cl.10.2))	-	0	-
10.2(Cable supporting test for Surface mounting (As per Cl.10.2))	-	0	-
10.2.3(Cable supporting test for Surface mounting (As per Cl.10.2.3))	-	0	-
10.2.3(Cable supporting test for Surface mounting (As per Cl.10.2.3))	-	0	-
10.2.3(Cable supporting test for Surface mounting (As per Cl.10.2.3))	-	0	-
10.2.3(Cable supporting test for Surface mounting (As per Cl.10.2.3))	-	0	-
10.3(Impact Test [ Cl.10.3 ])	-	500	-
10.3.4(Impact Test (As per Cl. 10.3.4 of IS: 14927(Pt-1):2001) )	-	0	-
10.4(Linear Deflection Test [ Cl.10.4 ])	-	500	-
10.5(External load Test [ Cl.10.5 ])	-	1000	-
11.1.1(Resistance to flame propagation (As per Cl. 11.1.1))	-	1000	-
11.1.1(Resistance to flame propagation (As per Cl. 11.1.1))	-	1000	-
12.2(Electrical continuity Test for earthing or bonding [ Cl.12.2 ])	-	1000	-
12.2(Electrical continuity Test for earthing or bonding [ Cl.12.2 ])	-	0	-
12.3(Electrical Insulating Strength and Insulation Resistance Test. [ Cl.12.3 ])	-	0	-
12.3(Electrical Insulating Strength and Insulation Resistance Test. [ Cl.12.3 ])	-	0	-
12.3(Electrical Insulating Strength and Insulation Resistance Test. [ Cl.12.3 ])	-	500	-
13(External Influences )	-	500	-
7(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7.101(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7.102(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7(Marking (as per Cl 7.2 of IS:14927(Pt-I ):2001))	-	0	-
8( Dimensions (As per cl.8.1 of IS 14927(Pt-1) : 2001))	-	500	-
8(Dimensions (As per cl.8.2 of IS 14927(Pt-1) : 2001)	-	500	-
8( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
8( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
8( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
8( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
8( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
8( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	500	-
8( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
8( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
9(Construction ( As per Cl. 9.1 of IS 14927(Pt-1):2001))	-	0	-
9.1.101(Construction)	-	500	-
9(Construction ( As per Cl. 9.2 of IS 14927(Pt-1):2001))	-	500	-
9(Construction ( As per Cl. 9.2 of IS 14927(Pt-1):2001))	-	0	-
9(Construction ( As per Cl. 9.2 of IS 14927(Pt-1):2001))	-	500	-
9(Construction ( As per Cl. 9.2 of IS 14927(Pt-1):2001))	-	0	-
9(Construction ( As per Cl. 9.3 of IS 14927(Pt-1):2001))	-	0	-
9(Construction ( As per Cl. 9.3.1 of IS 14927(Pt-1):2001))	-	0	-
9(Construction ( As per Cl. 9.3.2, Table-3 of IS 14927(Pt-1):2001))	-	0	-
9(Construction [Access to Live Parts (As per Cl. 9.4.1 of IS 14927(Pt-1):2001)])	-	0	-
9(Construction (As per Cl. 9.5 of IS 14927(Pt-1):2001))	-	0	-
9(Construction [Membranes (As per Cl.9.6.2 of IS: 14927 (Pt-1):2001)])	-	500	-
9(Construction [Membranes (As per Cl.9.6.4 of IS: 14927 (Pt-1):2001)])	-	0	-
9(Construction [Glands (As per Cl.9.7.2 and Table-4 of IS: 14927 (Pt-1):2001)] )	-	0	-
10(Mechanical Properties )	-	1000	-
10(Cable supporting test for Surface mounting (As per Cl.10.2))	-	500	-
10(Cable supporting test for Surface mounting (As per Cl.10.2))	-	500	-
10(Cable supporting test for Surface mounting (As per Cl.10.2))	-	0	-
10(Cable supporting test for Surface mounting (As per Cl.10.2))	-	0	-
10(Cable supporting test for Surface mounting (As per Cl.10.2))	-	0	-
10(Cable supporting test for Surface mounting (As per Cl.10.2.3))	-	0	-
10(Cable supporting test for Surface mounting (As per Cl.10.2.3))	-	0	-
10(Cable supporting test for Surface mounting (As per Cl.10.2.3))	-	0	-
10(Cable supporting test for Surface mounting (As per Cl.10.2.3))	-	0	-
10(Impact Test [ Cl.10.3 ])	-	1000	-
10(Impact Test (As per Cl. 10.3.4 of IS: 14927(Pt-1):2001) )	-	500	-
10(Linear Deflection Test [ Cl.10.4 ])	-	500	-
10(External load Test [ Cl.10.5 ])	-	500	-
11(Resistance to flame propagation (As per Cl. 11.1.1))	-	500	-
11(Resistance to flame propagation (As per Cl. 11.1.1))	-	500	-
12(Electrical continuity Test for earthing or bonding [ Cl.12.2 ])	-	500	-
12(Electrical continuity Test for earthing or bonding [ Cl.12.2 ])	-	500	-
12(Electrical Insulating Strength and Insulation Resistance Test. [ Cl.12.3 ])	-	500	-
12(Electrical Insulating Strength and Insulation Resistance Test. [ Cl.12.3 ])	-	500	-
12(Electrical Insulating Strength and Insulation Resistance Test. [ Cl.12.3 ])	-	500	-
13(External Influences )	-	500	-
4(General Requirements)	-	0	-
5(General Conditions for test)	-	0	-
7(Marking)	-	500	-
8(Dimensions)	-	500	-
9(Construction)	-	500	-
10(Mechanical Properties)	-	500	-
11(Resistance to flame propagation)	-	500	-
12(Electrical characteristics)	-	500	-
13(External Influences)	-	500	-

-
Included w.e.f 14.08.2025

3881

Standard Testing and Compliance Private Limited

6178726

IS 18112 (2025)

DIGITAL TELEVISION RECEIVER FOR SATELLITE BROADCAST TRANSMISSION SPECIFICATION (First Revision)

Digital Television Receiver for Satellite Broadcast Transmission — Specification

205000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.4, Table-2, ii)(RF characteristics to be supported by the DTV receiver)	-	5000	-
Clause 4.3(Specifications)	-	5000	-
Clause 4.5(Safety Requirements)	-	5000	-
Clause 5(Marking)	-	5000	-
Clause 6(Operating Life Test)	-	5000	-
Clause 4.1, Table-1, i) a)(Hardware specification)	-	5000	-
Clause 4.1, Table-1, i) b)(Decompression and decoding of SDTV video)	-	5000	-
Clause 4.1, Table-1, i) c)(Decompression and decoding of HDTV video)	-	5000	-
Clause 4.1, Table-1, i) d)(Decompression and decoding of audio)	-	5000	-
Clause 4.1, Table-1, i) e)(Active Format descriptors)	-	5000	-
Clause 4.1, Table-1, i) f)(Captioning and Sub-titling)	-	5000	-
Clause 4.1, Table-1, i) g)(Teletext)	-	5000	-
Clause 4.1, Table-1, i) h)(Multi-language support)	-	5000	-
Clause 4.1, Table-1, i) j)(DTV receiver mixed Audio Description)	-	5000	-
Clause 4.1, Table-1, i) k)(Broadcast mixed audio description)	-	5000	-
Clause 4.1, Table-1, i) m)(Service demultiplexing)	-	5000	-
Clause 4.1, Table-1, i) n)(Data services)	-	5000	-
Clause 4.1, Table-1, i) p)(OSD)	-	5000	-
Clause 4.1, Table-1, i) q)(DTV character set)	-	5000	-
Clause 4.1, Table-1, i) r)(Electronic Service Guide (ESG) ‘Now/Next’)	-	5000	-
Clause 4.1, Table-1, i) s)(Time)	-	5000	-
Clause 4.1, Table-1, i) t)(Digital TV output)	-	5000	-
Clause 4.4, Table-2, i) b)(Frequency)	-	5000	-
Clause 4.4, Table-2, i) a)(Input voltage range)	-	5000	-
Clause 4.1,Table-1, ii) a)(Demodulation and FEC decoding)	-	5000	-
Clause 4.1, Table-1, ii) b)(DTV Receiver Installation)	-	5000	-
Clause 4.1, Table-1, ii) c)(Network evolution)	-	5000	-
Clause 4.4, Table-2, iii) c)(RF input impedance)	-	5000	-
Clause 4.1, Table-1, ii) d)(Services available)	-	5000	-
Clause 4.1, Table-1, ii) e)(Selection via Service List)	-	5000	-
Clause 4.1, Table-1, ii) f)(Selection via Numeric Entry)	-	5000	-
Clause 4.1, Table-1, ii) g)(Favourite Channel list)	-	5000	-
Clause 4.1, Table-1, ii) h)(Hidden Services)	-	5000	-
Clause 4.4, Table-2, iii) b)(Input frequency range)	-	5000	-
Clause 4.1, Table-1, ii) j)(Logical Channel Number for Satellite services)	-	5000	-
Clause 4.1, Table-1, ii) k)(RF input signal)	-	5000	-
Clause 4.1, Table-1, ii) m)(LNB supply current)	-	5000	-
Clause 4.1, Table-1, ii) n)(LNB supply voltage)	-	5000	-
Clause 4.1, Table-1, ii) p)(LNB Control)	-	5000	-
Clause 4.1, Table-1, ii) q)(Modulation/Demodulation parameters for DVB-S & DVB-S2 standard)	-	5000	-
Clause 4.4, Table-2, iii) a)(Input level per carrier)	-	5000	-
Clause 4.4, Table-2, iv) c)(RF input impedance)	-	5000	-
Clause 4.4, Table-2, iv) b)(Input frequency range)	-	5000	-
Clause 4.4, Table-2, iv) a)(Input level per carrier)	-	5000	-
Clause 4.4, Table-2, v)(Symbol rate)	-	5000	-
Clause 4.4, Table-2, vi)(RF input return loss)	-	5000	-
Clause 4.4, Table-2, vii)(DisEqC)	-	5000	-
Clause 4.4, Table-2, viii)(Operating ambient temperature range)	-	5000	-
Clause 4.4, Table-2, ix)(Operating humidity range)	-	5000	-
Clause 4.1, Table-1, iii) a)(Interfaces, Connectors)	-	5000	-
Clause 4.1, Table-1, iv)(Automatic software upgrade mechanism)	-	5000	-
Clause 4.1, Table-1, v) a)(Remote Control)	-	5000	-
Clause 4.1, Table-1, v) b)(Easy to use and simple documentation)	-	5000	-
Clause 3.1, Table-1, v) c)(Support package)	-	5000	-
Clause 4.4, Table-2, ii)(RF characteristics to be supported by the DTV receiver)	-	5000	-
Clause 4.3(Specifications)	-	5000	-
Clause 4.5(Safety Requirements)	-	5000	-
Clause 5(Marking)	-	5000	-
Clause 6(Operating Life Test)	-	5000	-
Clause 4.1, Table-1, i) a)(Hardware specification)	-	5000	-
Clause 4.1, Table-1, i) b)(Decompression and decoding of SDTV video)	-	5000	-
Clause 4.1, Table-1, i) c)(Decompression and decoding of HDTV video)	-	5000	-
Clause 4.1, Table-1, i) d)(Decompression and decoding of audio)	-	5000	-
Clause 4.1, Table-1, i) e)(Active Format descriptors)	-	5000	-
Clause 4.1, Table-1, i) f)(Captioning and Sub-titling)	-	5000	-
Clause 4.1, Table-1, i) g)(Teletext)	-	5000	-
Clause 4.1, Table-1, i) h)(Multi-language support)	-	5000	-
Clause 4.1, Table-1, i) j)(DTV receiver mixed Audio Description)	-	5000	-
Clause 4.1, Table-1, i) k)(Broadcast mixed audio description)	-	5000	-
Clause 4.1, Table-1, i) m)(Service demultiplexing)	-	5000	-
Clause 4.1, Table-1, i) n)(Data services)	-	5000	-
Clause 4.1, Table-1, i) p)(OSD)	-	5000	-
Clause 4.1, Table-1, i) q)(DTV character set)	-	5000	-
Clause 4.1, Table-1, i) r)(Electronic Service Guide (ESG) ‘Now/Next’)	-	5000	-
Clause 4.1, Table-1, i) s)(Time)	-	5000	-
Clause 4.1, Table-1, i) t)(Digital TV output)	-	5000	-
Clause 4.4, Table-2, i) b)(Frequency)	-	5000	-
Clause 4.4, Table-2, i) a)(Input voltage range)	-	5000	-
Clause 4.1,Table-1, ii) a)(Demodulation and FEC decoding)	-	5000	-
Clause 4.1, Table-1, ii) b)(DTV Receiver Installation)	-	5000	-
Clause 4.1, Table-1, ii) c)(Network evolution)	-	5000	-
Clause 4.4, Table-2, iii) c)(RF input impedance)	-	5000	-
Clause 4.1, Table-1, ii) d)(Services available)	-	5000	-
Clause 4.1, Table-1, ii) e)(Selection via Service List)	-	5000	-
Clause 4.1, Table-1, ii) f)(Selection via Numeric Entry)	-	5000	-
Clause 4.1, Table-1, ii) g)(Favourite Channel list)	-	5000	-
Clause 4.1, Table-1, ii) h)(Hidden Services)	-	5000	-
Clause 4.4, Table-2, iii) b)(Input frequency range)	-	5000	-
Clause 4.1, Table-1, ii) j)(Logical Channel Number for Satellite services)	-	5000	-
Clause 4.1, Table-1, ii) k)(RF input signal)	-	5000	-
Clause 4.1, Table-1, ii) m)(LNB supply current)	-	5000	-
Clause 4.1, Table-1, ii) n)(LNB supply voltage)	-	5000	-
Clause 4.1, Table-1, ii) p)(LNB Control)	-	5000	-
Clause 4.1, Table-1, ii) q)(Modulation/Demodulation parameters for DVB-S & DVB-S2 standard)	-	5000	-
Clause 4.4, Table-2, iii) a)(Input level per carrier)	-	5000	-
Clause 4.4, Table-2, iv) c)(RF input impedance)	-	5000	-
Clause 4.4, Table-2, iv) b)(Input frequency range)	-	5000	-
Clause 4.4, Table-2, iv) a)(Input level per carrier)	-	5000	-
Clause 4.4, Table-2, v)(Symbol rate)	-	5000	-
Clause 4.4, Table-2, vi)(RF input return loss)	-	5000	-
Clause 4.4, Table-2, vii)(DisEqC)	-	5000	-
Clause 4.4, Table-2, viii)(Operating ambient temperature range)	-	5000	-
Clause 4.4, Table-2, ix)(Operating humidity range)	-	5000	-
Clause 4.1, Table-1, iii) a)(Interfaces, Connectors)	-	5000	-
Clause 4.1, Table-1, iv)(Automatic software upgrade mechanism)	-	5000	-
Clause 4.1, Table-1, v) a)(Remote Control)	-	5000	-
Clause 4.1, Table-1, v) b)(Easy to use and simple documentation)	-	5000	-
Clause 3.1, Table-1, v) c)(Support package)	-	5000	-

10 Jul, 2027

-
Included w.e.f.01.09.2025 Exclusion lause 4.6 (Electromagnetic Compatibility (EMC) Requirements)

3882

Advance Firetec and Research Lab Pvt. Ltd

8176606

IS 5290 (2025)

Landing Valves - Specification (Fourth Revision)

Normal Type and Pressure Regulating Type

21700.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6(FINISH)	-	500.00	For Cl. No. 6 (Finish) -200.00 + Cl. No. 3 - 150.00 + Cl. No. 4.1.1 / Cl. No. 4.1.2 - 150.00
Cl-7.1(Water Tightness Test for the Stop Valve)	-	5000.00	Cl. NO. 7.1.2 - 5000.00 / Cl. NO. 7.1.3 -5000.00
Cl-7.2(Hydrostatic Pressure Test)	-	5000.00	Cl. NO. 7.2.2 - 5000.00 / Cl. NO. 7.2.3 -5000.00
Cl-7.3(Flow Test)	-	5000.00	Cl. NO. 7.3.1 - 5000.00 / Cl. NO. 7.3.2 -5000.00
Cl-8(Marking)	-	200	-
Cl-4.3, Table-1(Flanged -Outer Diameter)	-	500.00	-
Cl-4.3, Table-1(Flanged - Thickness)	-	500.00	-
Cl-4.3, Table-1(Flanged -Pitch Circle Diameter (PCD))	-	500.00	-
Cl-4.3, Table-1(Flanged -No. of Holes × Diameter of Hole)	-	500.00	-
Cl-4.3, Table-1(Threaded)	-	500.00	-
Cl-4.2(shape and dimensions of)	-	3500.00	For Fig.1 - 1000.00 + Fig. 2- 2000.00 + Fig.5 - 500.00 / Fig.3 - 1000.00 + Fig.4 - 2000.00 + Fig.5 - 500.00
Cl-4.4(Outlet(s) of landing valve)	-	0.00	Testing charge is mentioned at Fig. 2 and Fig. 5.
Cl-4.4(dimensions- outlet adaptor)	-	0.00	Testing charge is mentioned at Fig. 2 and Fig. 5.
Cl-4.4(dimensions- Blank cap for outlet)	-	0.00	Testing charge is mentioned at Fig. 2 and Fig. 5.
Cl-6(FINISH)	-	0	Repeated One.
Cl-7.1(Water Tightness Test for the Stop Valve)	-	0	Repeated One.
Cl-7.2(Hydrostatic Pressure Test)	-	0	Repeated One.
Cl-7.3(Flow Test)	-	0	Repeated One.
Cl-8(Marking)	-	0	Repeated One.
Cl-4.3, Table-1(Flanged -Outer Diameter)	-	0	Repeated One.
Cl-4.3, Table-1(Flanged - Thickness)	-	0	Repeated One.
Cl-4.3, Table-1(Flanged -Pitch Circle Diameter (PCD))	-	0	Repeated One.
Cl-4.3, Table-1(Flanged -No. of Holes × Diameter of Hole)	-	0	Repeated One.
Cl-4.3, Table-1(Threaded)	-	0	Repeated One.
Cl-4.2(shape and dimensions of)	-	0	Repeated One.
Cl-4.4(Outlet(s) of landing valve)	-	0	Repeated One.
Cl-4.4(dimensions- outlet adaptor)	-	0	Repeated One.
Cl-4.4(dimensions- Blank cap for outlet)	-	0	Repeated One.
Cl-6(FINISH)	-	-	-
Cl-7.1(Water Tightness Test for the Stop Valve)	-	-	-
Cl-7.2(Hydrostatic Pressure Test)	-	-	-
Cl-7.3(Flow Test)	-	-	-
Cl-8(Marking)	-	-	-
Cl-4.3, Table-1(Flanged -Outer Diameter)	-	-	-
Cl-4.3, Table-1(Flanged - Thickness)	-	-	-
Cl-4.3, Table-1(Flanged -Pitch Circle Diameter (PCD))	-	-	-
Cl-4.3, Table-1(Flanged -No. of Holes × Diameter of Hole)	-	-	-
Cl-4.3, Table-1(Threaded)	-	-	-
Cl-4.2(shape and dimensions of)	-	-	-
Cl-4.4(Outlet(s) of landing valve)	-	-	-
Cl-4.4(dimensions- outlet adaptor)	-	-	-
Cl-4.4(dimensions- Blank cap for outlet)	-	-	-

03 Mar, 2027

-
Included w.e.f.23.09.2025 Exclusion Cl-5 (Material of Construction) Cl-5 (Finish)

3883

Aaditech Test and Calibration Lab LLP

8179926

IS 996 (2025)

SINGLE PHASE ac INDUCTION MOTORS FOR GENERAL PURPOSE (Fouth Revision)

Voltages upto and including 250 V and output upto and including 750W i.e blade/fan loaded motor applicable. W

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
10(Type of enclosures)	-	1000	-
11(Methods of cooling)	-	0	-
9.1(General construction (as per Cl. 9 & F-3))	-	0	-
9(General construction (as per Cl. 9 & F-3))	-	0	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	0	-
9(General construction (as per Cl. 9 & F-3))	-	0	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	0	-
9.4.13(General construction (as per Cl. 9 & F-3))	-	0	-
4.1(Rated Voltage)	-	0	-
4.2(Rated Frequency)	-	0	-
4.3(Rated Output)	-	0	-
4.4(Rated Speed)	-	0	-
7(Dimensions (Cl.App.F-4))	-	0	-
9.5(Earthing)	-	0	-
9.5(Earthing)	-	0	-
9.5(Earthing)	-	0	-
17.3 (a)(No load test at rated voltage and frequency )	-	1000	-
17.3 (a)(No load test at rated voltage and frequency)	-	0	-
17.3 (a)(No load test at rated voltage and frequency)	-	0	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	1000	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	0	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	0	-
12.1.1(Test for Breakaway starting current at rated voltage and frequency (Cl.12.1.1 & Cl. 12.5))	-	0	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	1000	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	0	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	0	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	0	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	1000	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	0	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	0	-
12.7(Insulation resistance test)	-	500	-
13.1(High voltage test)	-	500	-
13.2(Moisture proofness)	-	2000	-
13.2(Moisture proofness)	-	0	-
13.3(Leakage current test)	-	500	-
12.6(Vibration Severity)	-	500	-
15.1(ADDITIONAL TESTS (For ECO - MARK))	-	500	-
15.1.5(Noise Level)	-	250	-
15.2(Specific Requirements)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
10(Type of enclosures)	-	0	-
11(Methods of cooling)	-	0	-
9.1(General construction (as per Cl. 9 & F-3))	-	0	-
9(General construction (as per Cl. 9 & F-3))	-	0	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	0	-
9(General construction (as per Cl. 9 & F-3))	-	0	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	0	-
9.4.13(General construction (as per Cl. 9 & F-3))	-	0	-
4.1(Rated Voltage)	-	0	-
4.2(Rated Frequency)	-	0	-
4.3(Rated Output)	-	0	-
4.4(Rated Speed)	-	0	-
9.5(Earthing)	-	0	-
9.5(Earthing)	-	0	-
9.5(Earthing)	-	0	-
17.3 (a)(No load test at rated voltage and frequency )	-	0	-
17.3 (a)(No load test at rated voltage and frequency)	-	0	-
17.3 (a)(No load test at rated voltage and frequency)	-	0	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	0	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	0	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	0	-
12.1.1(Test for Breakaway starting current at rated voltage and frequency (Cl.12.1.1 & Cl. 12.5))	-	250	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	0	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	0	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	0	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	0	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	0	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	0	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	0	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	0	-
12.7(Insulation resistance test)	-	0	-
13.1(High voltage test)	-	0	-
13.2(Moisture proofness)	-	0	-
13.2(Moisture proofness)	-	0	-
13.3(Leakage current test)	-	0	-
12.6(Vibration Severity)	-	0	-
15.1(ADDITIONAL TESTS (For ECO - MARK))	-	500	-
15.1.5(Noise Level)	-	0	-
15.2(Specific Requirements)	-	0	-
9.0(Observation)	-	0	-
7.2(Dimensions)	-	0	-
11.0(Observation)	-	0	-
17.3 (j)(Observation)	-	0	-
9.5(Observation)	-	0	-
14.0(Observation)	-	0	-
16.0(Observation)	-	0	-
17.4 & 9.4.6.1(Observation)	-	0	-
17.3 (k)(Current)	-	0	-
17.3 (m)(Vibration)	-	0	-
17.3 (g)(Insulation Resistance)	-	0	-
17.3 (h)(Voltage)	-	0	-
17.3 (b)(Temperature)	-	0	-
17.3 (e)(Temperature)	-	0	-
17.3 (f)(Torque)	-	0	-
17.3 (c)(Current, Torque)	-	0	-
17.3 (d)(Voltage, Current, Power, Frequency, Speed, Efficiency, Power factor, Slip)	-	0	-
17.3 (a)(Voltage, Current, Power, Frequency, Speed)	-	0	-
14(Terminal marking)	-	0	-
12.1.2(Momentary overload for motors)	-	0	-
16(Observation)	-	0	-
14(Observation)	-	0	-
9.5(Observation)	-	0	-
17.3 (a)(Voltage, Current, Power, Frequency, Speed)	-	0	-
17.3 (d)(Voltage, Current, Power, Frequency, Speed, Efficiency, Power factor, Slip)	-	0	-
17.3 (c)(Current, Torque)	-	0	-
17.3 (f)(Torque)	-	0	-
17.3 (e)(Temperature)	-	0	-
17.3 (b)(Temperature)	-	0	-
17.3 (h)(Voltage)	-	0	-
17.3 (g)(Insulation Resistance)	-	0	-
17.3 (m)(Vibration)	-	0	-
17.3 (j)(Observation)	-	0	-
17.3 (k)(Current)	-	0	-
11(Observation)	-	0	-
17.4 & 9.4.6.1(Observation)	-	0	-
7.2(Dimensions)	-	0	-
9(Observation)	-	0	-
16(Observation)	-	0	-
14(Observation)	-	0	-
9.5(Observation)	-	0	-
17.3 (a)(Voltage, Current, Power, Frequency, Speed)	-	0	-
17.3 (d)(Voltage, Current, Power, Frequency, Speed, Efficiency, Power factor, Slip)	-	0	-
17.3 (c)(Current, Torque)	-	0	-
17.3 (f)(Torque)	-	0	-
17.3 (e)(Temperature)	-	0	-
17.3 (b)(Temperature)	-	0	-
17.3 (h)(Voltage)	-	0	-
17.3 (g)(Insulation Resistance)	-	0	-
17.3 (m)(Vibration)	-	0	-
17.3 (j)(Observation)	-	0	-
17.3 (k)(Current)	-	0	-
11(Observation)	-	0	-
17.4 & 9.4.6.1(Observation)	-	0	-
7.2(Dimensions)	-	0	-
9(Observation)	-	0	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	0	-
Cl-7(Dimensions)	-	0	-
Cl-9.1(Mounting)	-	0	-
Cl-9.2(Terminal Box)	-	0	-
Cl-9.3(Mounting Constructions)	-	0	-
Cl-9.3(Mounting Constructions)	-	0	-
Cl-9.4(Constructional Features)	-	0	-
Cl-9.5(Earthing)	-	0	-
Cl-10.1(Enclosures)	-	0	-
Cl-12.1(Torques)	-	0	-
Cl-12.1.2(Momentary overload test)	-	0	-
Cl-12.2(Temperature Rise)	-	0	-
Cl-12.3(Short Time Rating)	-	0	-
Cl-12.4(Method of Testing)	-	0	-
Cl-12.5(Performance Values)	-	0	-
Cl-12.6(Limits of Vibration Severity)	-	0	-
Cl-12.7(Insulation Resistance)	-	0	-
Cl-13.1(High Voltage Values)	-	0	-
Cl-13.2(Moisture Proofness)	-	0	-
Cl-13.3(Leakage Current)	-	0	-
Cl-14(Winding Resistance Measurement)	-	0	-
Cl-15(REDUCED VOLTAGE RUNNING UP TEST AT NO LOAD)	-	0	-
Cl-16(NOISE LEVEL)	-	0	-
Cl-17(OVER SPEED TEST)	-	0	-
Cl-18(TERMINAL MARKING)	-	0	-
Cl-12.1.1(Test for torues at rated voltage and frequency)	-	0	-
Cl-12.1.1(Pull up Torque at rated voltage and frequency)	-	0	-
Cl-12.1.1(Test for breakaway starting current at rated voltage and frequency)	-	0	-
Cl-12.1.2(Breakaway (starting) torque at rated voltage and frequency)	-	0	-
Cl-12.5.1(Test for full-load performance at rated voltage and frequency)	-	0	-
Cl-21.5(Acceptance Tests)	-	0	-
Cl-7(Dimensions)	-	0	-
Cl-9.1(Mounting)	-	0	-
Cl-9.2(Terminal Box)	-	0	-
Cl-9.3(Mounting Constructions)	-	0	-
Cl-9.3(Mounting Constructions)	-	0	-
Cl-9.4(Constructional Features)	-	0	-
Cl-9.5(Earthing)	-	0	-
Cl-10.1(Enclosures)	-	0	-
Cl-12.1(Torques)	-	0	-
Cl-12.1.2(Momentary overload test)	-	0	-
Cl-12.2(Temperature Rise)	-	0	-
Cl-12.3(Short Time Rating)	-	0	-
Cl-12.4(Method of Testing)	-	0	-
Cl-12.5(Performance Values)	-	0	-
Cl-12.6(Limits of Vibration Severity)	-	0	-
Cl-12.7(Insulation Resistance)	-	0	-
Cl-13.1(High Voltage Values)	-	0	-
Cl-13.2(Moisture Proofness)	-	0	-
Cl-13.3(Leakage Current)	-	0	-
Cl-14(Winding Resistance Measurement)	-	0	-
Cl-15(REDUCED VOLTAGE RUNNING UP TEST AT NO LOAD)	-	0	-
Cl-16(NOISE LEVEL)	-	0	-
Cl-17(OVER SPEED TEST)	-	0	-
Cl-18(TERMINAL MARKING)	-	0	-
Cl-12.1.1(Test for torues at rated voltage and frequency)	-	0	-
Cl-12.1.1(Pull up Torque at rated voltage and frequency)	-	0	-
Cl-12.1.1(Test for breakaway starting current at rated voltage and frequency)	-	0	-
Cl-12.1.2(Breakaway (starting) torque at rated voltage and frequency)	-	0	-
Cl-12.5.1(Test for full-load performance at rated voltage and frequency)	-	0	-
Cl-21.5(Acceptance Tests)	-	0	-
Cl-7(Dimensions)	-	0	-
Cl-9.1(Mounting)	-	0	-
Cl-9.2(Terminal Box)	-	0	-
Cl-9.3(Mounting Constructions)	-	0	-
Cl-9.3(Mounting Constructions)	-	0	-
Cl-9.4(Constructional Features)	-	0	-
Cl-9.5(Earthing)	-	0	-
Cl-10.1(Enclosures)	-	0	-
Cl-12.1(Torques)	-	0	-
Cl-12.1.2(Momentary overload test)	-	0	-
Cl-12.2(Temperature Rise)	-	0	-
Cl-12.3(Short Time Rating)	-	0	-
Cl-12.4(Method of Testing)	-	0	-
Cl-12.5(Performance Values)	-	0	-
Cl-12.6(Limits of Vibration Severity)	-	0	-
Cl-12.7(Insulation Resistance)	-	0	-
Cl-13.1(High Voltage Values)	-	0	-
Cl-13.2(Moisture Proofness)	-	0	-
Cl-13.3(Leakage Current)	-	0	-
Cl-14(Winding Resistance Measurement)	-	0	-
Cl-15(REDUCED VOLTAGE RUNNING UP TEST AT NO LOAD)	-	0	-
Cl-16(NOISE LEVEL)	-	0	-
Cl-17(OVER SPEED TEST)	-	0	-
Cl-18(TERMINAL MARKING)	-	0	-
Cl-12.1.1(Test for torues at rated voltage and frequency)	-	0	-
Cl-12.1.1(Pull up Torque at rated voltage and frequency)	-	0	-
Cl-12.1.1(Test for breakaway starting current at rated voltage and frequency)	-	0	-
Cl-12.1.2(Breakaway (starting) torque at rated voltage and frequency)	-	0	-
Cl-12.5.1(Test for full-load performance at rated voltage and frequency)	-	0	-
Cl-21.5(Acceptance Tests)	-	0	-

-
Included w.e.f 15.10.2025

3884

Sleen India Biz venture Private Limited, Agra

9139736

IS 14225 (2017)

Automotive vehicles - Locking systems and door retention components - General requirements (First Revision)

14250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(General Requirements)	-	250	-
Cl-4.2(Door Latches- hinged door system)	-	250	-
Cl-4.2(Door Latches- sliding door system)	-	250	-
Cl-5.1.1(Hinged Doors- Load Test One)	-	1000	-
Cl-5.1.2(Hinged Doors- Load Test Two)	-	1000	-
Cl-5.1.3(Hinged Doors- Load Test Three)	-	1000	-
Cl-5.1.4(Hinged Doors- Inertial Load)	-	2500	-
Cl-5.1.5(Hinged Doors- Door Hinges)	-	1500	-
Cl-5.2.1(Sliding Side Doors- Load Test One)	-	1500	-
Cl-5.2.2(Sliding Side Doors- Load Test Two)	-	1500	-
Cl-5.2.3(Sliding Side Doors- Inertial Load)	-	2500	-
Cl-5.3(Door Locks)	-	500	-
Cl-5.3.2(Rear Side Doors)	-	500	-
Cl-5.3.3(Back Doors)	-	500	-

-
Included w.e.f 18.12.2025

3885

DELHI TEST HOUSE (50) KUNDLI SONIPAT

9127026

IS 17550 : Part 3 (2025)

Household Refrigerating Appliances - Characteristics and Methods Of Test Part 3 Energy Consumption and Volume (First Revision)

150000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.1, Annex A(set up for energy consumption)	-	0	-
Clause 4.2, Annex B(Steady state power consumption)	-	0	-
Clause 4.3, Annex C(Defrost and Recovery Energy and Temperature Change)	-	0	-
Clause 4.4, Annex D(Defrost Frequency)	-	0	-
Clause 4.5, Annex E(Number of Test Points and Interpolation)	-	0	-
Clause 4.6, Annex G(Load Processing Efficiency)	-	0	-
Clause 4.7, Annex F(Specified Auxiliaries)	-	0	-
Clause 4.8, Annex H(Volume determination)	-	25000	-
Clause 4.8.1, Annex H(Rated total volume)	-	0	-
Clause 5, 5.1, 5.2 Table 1(TARGET TEMPERATURES FOR ENERGY DETERMINATION)	-	0	-
Clause 6, 6.1 to 6.8(DETERMINATION OF ENERGY CONSUMPTION)	-	125000	-

23 Jun, 2028

-
Included w.e.f. 28.07.2025

3886

PAAM Testing Labs Private Limited, Greater Noida

8185506

IS 884 (2025)

First-Aid Hose-Reel for Fire Fighting - Specification (Second Revision)

Type A and Type B

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4(Dimensions)	-	1500	Rs. 25000/- for complete testing excluded Material Test (Cl. 5).
Cl. 7(PERFORMANCE REQUIREMENT)	-	20000	-
Cl. 7.1(Hydrostatic pressure test)	-	5000	-
Cl. 7.2(Resistance to leakage)	-	2500	-
Cl. 7.3(Strength)	-	1500	-
Cl. 7.3.1(Impact resistance test)	-	1500	-
Cl. 7.3.2(Load Resistance Test)	-	1500	-
Cl. 7.4(Range and Water flow rate)	-	1500	-
Cl. 7.5(Swinging Arrangement)	-	1500	-
Cl. 7.6(Reel Action)	-	1000	-
Cl. 8(WORKMANSHIP AND FINISH)	-	250	-
Cl. 8.2(Painting)	-	250	-
Cl. 7.7(Resistance to impact test for nozzle)	-	2000	-
Cl. 7.8("Ageing test for plastic made nozzle")	-	2000	-
Cl. 7.9("Resistance to external corrosion test")	-	1000	-
Cl. 5(MATERIAL)	-	30000	1. Rs. 5500/- for Hub. 2. Rs. 5500/- for Sides. 3. Rs. 5000/- for Wall bracket/Mounting stand. 4. RS. 5000/- for Swivel joint. 5. Rs. 5500/- for Hose-reel tubing. 6. Rs. 5500/- for Nozzle. 7. Rs. 5000/- for Stop Valve. 8. Rs. 5500/- Pipework & Fittings
Cl. 6(CONSTRUCTION)	-	500	-
Cl. 9(CRITERIA FOR CONFORMITY)	-	100	-
Cl. 10(MARKING)	-	100	-

08 May, 2028

-
Included w.e.f 22.07.2025

3887

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

9135626

IS 18112 (2025)

DIGITAL TELEVISION RECEIVER FOR SATELLITE BROADCAST TRANSMISSION SPECIFICATION (First Revision)

Digital Television Receiver for Satellite Broadcast Transmission

360000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.4, Table-2, ii)(RF characteristics to be supported by the DTV receiver)	-	7500	Total Testing Charges: Rs.3,60,000/- (Safety: Rs.25,000/-, EMI/EMC: Rs.2Lakhs, Performance: Rs.1.30Lakhs, Operating Life Test: Rs.5,000/-)
Clause 4.3(Specifications)	-	0	-
Clause 4.5(Safety Requirements)	-	25000	-
Clause 4.6(Electromagnetic Compatibility (EMC) Requirements)	-	200000	-
Clause 5(Marking)	-	500	-
Clause 6(Operating Life Test)	-	7500	-
Clause 4.1, Table-1, i) a)(Hardware specification)	-	7500	-
Clause 4.1, Table-1, i) b)(Decompression and decoding of SDTV video)	-	7500	-
Clause 4.1, Table-1, i) c)(Decompression and decoding of HDTV video)	-	7500	-
Clause 4.1, Table-1, i) d)(Decompression and decoding of audio)	-	7500	-
Clause 4.1, Table-1, i) e)(Active Format descriptors)	-	7500	-
Clause 4.1, Table-1, i) f)(Captioning and Sub-titling)	-	7500	-
Clause 4.1, Table-1, i) g)(Teletext)	-	7500	-
Clause 4.1, Table-1, i) h)(Multi-language support)	-	7500	-
Clause 4.1, Table-1, i) j)(DTV receiver mixed Audio Description)	-	7500	-
Clause 4.1, Table-1, i) k)(Broadcast mixed audio description)	-	7500	-
Clause 4.1, Table-1, i) m)(Service demultiplexing)	-	7500	-
Clause 4.1, Table-1, i) n)(Data services)	-	7500	-
Clause 4.1, Table-1, i) p)(OSD)	-	10000	-
Clause 4.1, Table-1, i) q)(DTV character set)	-	7500	-
Clause 4.1, Table-1, i) r)(Electronic Service Guide (ESG) ‘Now/Next’)	-	7500	-
Clause 4.1, Table-1, i) s)(Time)	-	7500	-
Clause 4.1, Table-1, i) t)(Digital TV output)	-	7500	-
Clause 4.4, Table-2, i) b)(Frequency)	-	7500	-
Clause 4.4, Table-2, i) a)(Input voltage range)	-	7500	-
Clause 4.1,Table-1, ii) a)(Demodulation and FEC decoding)	-	7500	-
Clause 4.1, Table-1, ii) b)(DTV Receiver Installation)	-	7500	-
Clause 4.1, Table-1, ii) c)(Network evolution)	-	7500	-
Clause 4.4, Table-2, iii) c)(RF input impedance)	-	7500	-
Clause 4.1, Table-1, ii) d)(Services available)	-	7500	-
Clause 4.1, Table-1, ii) e)(Selection via Service List)	-	7500	-
Clause 4.1, Table-1, ii) f)(Selection via Numeric Entry)	-	7500	-
Clause 4.1, Table-1, ii) g)(Favourite Channel list)	-	7500	-
Clause 4.1, Table-1, ii) h)(Hidden Services)	-	7500	-
Clause 4.4, Table-2, iii) b)(Input frequency range)	-	7500	-
Clause 4.1, Table-1, ii) j)(Logical Channel Number for Satellite services)	-	7500	-
Clause 4.1, Table-1, ii) k)(RF input signal)	-	7500	-
Clause 4.1, Table-1, ii) m)(LNB supply current)	-	7500	-
Clause 4.1, Table-1, ii) n)(LNB supply voltage)	-	7500	-
Clause 4.1, Table-1, ii) p)(LNB Control)	-	7500	-
Clause 4.1, Table-1, ii) q)(Modulation/Demodulation parameters for DVB-S & DVB-S2 standard)	-	7500	-
Clause 4.4, Table-2, iii) a)(Input level per carrier)	-	7500	-
Clause 4.4, Table-2, iv) c)(RF input impedance)	-	7500	-
Clause 4.4, Table-2, iv) b)(Input frequency range)	-	7500	-
Clause 4.4, Table-2, iv) a)(Input level per carrier)	-	7500	-
Clause 4.4, Table-2, v)(Symbol rate)	-	7500	-
Clause 4.4, Table-2, vi)(RF input return loss)	-	7500	-
Clause 4.4, Table-2, vii)(DisEqC)	-	7500	-
Clause 4.4, Table-2, viii)(Operating ambient temperature range)	-	0	-
Clause 4.4, Table-2, ix)(Operating humidity range)	-	0	-
Clause 4.1, Table-1, iii) a)(Interfaces, Connectors)	-	0	-
Clause 4.1, Table-1, iv)(Automatic software upgrade mechanism)	-	0	-
Clause 4.1, Table-1, v) a)(Remote Control)	-	7500	-
Clause 4.1, Table-1, v) b)(Easy to use and simple documentation)	-	0	-
Clause 3.1, Table-1, v) c)(Support package)	-	0	-

19 Mar, 2029

-
Included w.e.f 11.08.2025

3888

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 249 (2022)

SODIUM BICHROMATE TECHNICAL SPECIFICATION

4800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Description)	-
3.2 , Table No. 1 , i) (Free moisture and combined water)	-
3.2 , Table No. 1 , ii) (Sodium bichromate (Na2Cr2O7) content)	-
3.2 , Table No. 1 , iii) (Sulphates (as Na2SO4))	-
3.2 , Table No. 1 , iv) (Chlorides ( as NaCl ),)	-
3.2 , Table No. 1 , v) (Calcium compounds (as CaSO4),)	-
3.2 , Table No. 1 , vi) (Matter insoluble in water)	-
3.2 , Table No. 1 , vii) (pH value (of aqueous solution))	-

-
-

3889

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET) : IPT-BHUBANESWAR

5102634

IS 13487 (2024)

Irrigation Equipment — Emitters — Specification

Uniformity category A or uniformity category B

6825 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Connections)	-	375	-
Cl-5.2(Emitter Ends)	-	375	-
Cl-5.3(Materials)	-	0	-
Cl-6.1(Test Specimens)	-	375	-
Cl-6.2.1(polyethylene pipe)	-	1500	-
Cl-6.2.3(water temperature)	-	0	-
Cl-6.3(Accuracy or Measuring Devices)	-	0	-
Cl-7.1(Construction and Workmanship)	-	375	-
Cl-7.2(Flow Paths in Emitter)	-	375	-
Cl-7.3(Resistance to Hydrostatic Pressure)	-	750	-
Cl-7.4(Emitter Pull-Out)	-	375	-
Cl-7.4.1(In-Line Emitters)	-	0	-
Cl-7.4.2(On-Line Emitters)	-	0	-
Cl-8.1.1(Uniformity of Emission Rate)	-	750	-
Cl-8.1.2(Emission Rate as Function of Inlet Pressure)	-	750	-
Cl-8.1.3(Determination of Emitter Exponent)	-	450	-
Cl-9(Marking)	-	0	-
Cl-6.2.2("grease or chemicals ")	-	375	-
Cl-5.1(Connections)	-	0	-
Cl-5.2(Emitter Ends)	-	0	-
Cl-5.3(Materials)	-	0	-
Cl-6.1(Test Specimens)	-	0	-
Cl-6.2.1(polyethylene pipe)	-	0	-
Cl-6.2.3(water temperature)	-	0	-
Cl-6.3(Accuracy or Measuring Devices)	-	0	-
Cl-7.1(Construction and Workmanship)	-	0	-
Cl-7.2(Flow Paths in Emitter)	-	0	-
Cl-7.3(Resistance to Hydrostatic Pressure)	-	0	-
Cl-7.4(Emitter Pull-Out)	-	0	-
Cl-7.4.1(In-Line Emitters)	-	0	-
Cl-7.4.2(On-Line Emitters)	-	0	-
Cl-8.1.1(Uniformity of Emission Rate)	-	0	-
Cl-8.1.2(Emission Rate as Function of Inlet Pressure)	-	0	-
Cl-8.1.3(Determination of Emitter Exponent)	-	0	-
Cl-9(Marking)	-	0	-
Cl-6.2.2("grease or chemicals ")	-	0	-

31 Dec, 2026

-
Included w.e.f.22.07.2025

3890

INDIAN TESTING LABORATORY PRIVATE LIMITED, GREATER NOIDA

8171306

IS 444 (2025)

Rubber Hoses, Textile-Reinforced, for General-Purpose Water Applications - Specification (Sixth Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(Material and Construction)	-	500	-
Cl-6.1(Internal diameters and tolerances)	-	1000	-
Cl-6.2(Concentricity)	-	1000	-
Cl-6.3(Tolerance of length)	-	1000	-
Cl-6.4(Minimum thickness of lining and cover)	-	1000	-
Cl-7.1, Table-2 (i)(Minimum tensile strength)	-	2000	-
Cl-7.1, Table-2 (ii)(Minimum elongation at break)	-	2000	-
Cl-7.1, Table-2 (iii)("Resistance to ageing: Change in tensile strength from original value (max) . Change in elongation at break from original value (max)")	-	2000	-
Cl-7.2, Table-3 (i)(Proof pressure at 23 0 C)	-	2000	-
Cl-7.2, Table-3 (ii)(Change in length at proof pressure)	-	2000	-
Cl-7.2, Table-3 (iii)(Minimum burst pressure)	-	3000	-
Cl-7.2, Table-3 (iv)(Adhesion between component)	-	1500	-
Cl-7.2, Table-3 (v)(Ozone resistance)	-	5000	-
Cl-7.2, Table-3 (vi)(Flexibility at 23ºC)	-	2500	-
Cl-7.2, Table-3 (vii)(Low-temperature flexibility)	-	2500	-
Cl-8(Marking)	-	100	-

15 Aug, 2028

-
Included w.e.f.22.07.2025

3891

Excel Surveyors Pvt. Ltd., Kolkata

5135906

IS 7903 (2017)

Textiles – Tarpaulins made from high density polyethylene (HDPE) woven fabrics – Specification (fifth revision)

Type I - VII

20700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.4( Line/ Cord beading IS 7903)	-	300	-
4.0(Types IS 7903)	-	200	-
5.1.1(Coating Thickness)	-	200	-
5.1.1(Carbon Black Content)	-	700	-
5.1.1(Sandwich lamination thickness)	-	200	-
5.1.1(Mass of Finished Tarpaulin)	-	300	-
5.1.1(UV Exposure (144 hrs))	-	8000	UV EXPOSURE TEST FOR 200 HRS AS PER AMDT. NO. 2 OF IS 7903 - 2017 & IS 16703 - 2017
5.1.1(Agening)	-	2000	-
5.1.1(Lamination IS 7903)	-	200	-
5.1.2(Lamination IS 7903)	-	0	-
5.2.1(Construction IS 7903)	-	300	-
5.2.1(Construction IS 7903)	-	0	-
5.2.1(Construction IS 7903)	-	0	-
5.2.1(Construction IS 7903)	-	0	-
5.2.1(Construction IS 7903)	-	0	-
5.2.1(Construction IS 7903)	-	0	-
5.2.1(Construction IS 7903)	-	0	-
5.2.1(Construction IS 7903)	-	0	-
5.3(Joint/Seam, IS 7903)	-	300	-
5.4(Fixing of Eyelets, IS 7903)	-	300	-
5.4(Fixing of Eyelets ,IS 7903)	-	0	-
6.1 Table 1,i)(No of HDPE fabric layers ,IS 7903)	-	200	-
6.1 Table 1,ii)(No of lamination layers, IS 7903)	-	200	-
6.1 Table 1, iii)(Total no of layers in the finished tarpaulin, IS 7903)	-	200	-
6.1 Table 1,iv)(Mass of finished tarpaulin, Annex B ,IS 7903)	-	500	-
6.1 Table 1,v)(Mass of laminated fabric, Annex C , IS 7903)	-	500	-
6.1 Table 1vi)(Breaking strength before UV exposure,warp ,IS 1969 Part 1)	-	400	-
6.1 Table 1vi)(Breaking strength before UV exposure,weft, IS 1969 part 1)	-	400	-
6.1 Table 1 vii)(Elongation at break of fabric,warp, IS 1969 Part 1)	-	0	-
6.1 Table 1 vii)(Elongation at break of fabric,weft, IS 1969 Part1)	-	0	-
6.1 Table 1 viii)(Retention of breaking strength after UV exposure of 144h Warp, IS 13162 part 2& IS 1969 Part1 )	-	0	-
6.1 Table 1 viii)(Retention of breaking strength after UV exposure of 144h Weft , IS 13162 part 2& IS 1969 Part1 )	-	0	-
6.1 Table 1 ix)(Welded seam strength before UV exposure (Weft) , IS 1969 Part 1)	-	0	-
6.1 Table 1 x)(Retention of welded seam strength after UV exposure of 144h(Weft) ,IS 13162 part 2& IS 1969 Part1 )	-	0	-
6.1 Table 1 xi)(Trapezoidal tear strength, IS 14293)	-	800	-
6.1 Table 1 xii)(Puncture Resistance, Annex D of IS 7903)	-	700	-
6.1 Table 1 xiii)(Impact Failure load , at 1524 mmdrop, Annex E of IS 7903)	-	800	-
6.1 Table 1 xiv)(Color fastness to light (For color Tarpulines) , IS 2454)	-	700	-
6.1 Table 1 xv)(Ash Content, Annex F of IS 7903)	-	700	-
6.2(Length, IS 7903)	-	200	-
6.2(Width, IS 7903)	-	200	-
6.2(height, IS 7903)	-	200	-
6.3(Water Proofness,IS 7941)	-	300	-
6.3(Water Proofness, IS 7940)	-	300	-
3.4( Line/ Cord beading IS 7903)	-	0	-
4.0(Types IS 7903)	-	0	-
5.1.1(Lamination IS 7903)	-	0	-
5.1.2(Lamination IS 7903)	-	0	-
5.2.1(Construction IS 7903)	-	0	-
5.2.1(Construction IS 7903)	-	0	-
5.2.1(Construction IS 7903)	-	0	-
5.2.1(Construction IS 7903)	-	0	-
5.2.1(Construction IS 7903)	-	0	-
5.2.1(Construction IS 7903)	-	0	-
5.2.1(Construction IS 7903)	-	0	-
5.2.1(Construction IS 7903)	-	0	-
5.3(Joint/Seam, IS 7903)	-	0	-
5.4(Fixing of Eyelets, IS 7903)	-	0	-
5.4(Fixing of Eyelets ,IS 7903)	-	0	-
6.1 Table 1,i)(No of HDPE fabric layers ,IS 7903)	-	0	-
6.1 Table 1,ii)(No of lamination layers, IS 7903)	-	0	-
6.1 Table 1, iii)(Total no of layers in the finished tarpaulin, IS 7903)	-	0	-
6.1 Table 1,iv)(Mass of finished tarpaulin, Annex B ,IS 7903)	-	0	-
6.1 Table 1,v)(Mass of laminated fabric, Annex C , IS 7903)	-	0	-
6.1 Table 1vi)(Breaking strength before UV exposure,warp ,IS 1969 Part 1)	-	0	-
6.1 Table 1vi)(Breaking strength before UV exposure,weft, IS 1969 part 1)	-	0	-
6.1 Table 1 vii)(Elongation at break of fabric,warp, IS 1969 Part 1)	-	0	-
6.1 Table 1 vii)(Elongation at break of fabric,weft, IS 1969 Part1)	-	0	-
6.1 Table 1 viii)(Retention of breaking strength after UV exposure of 144h Warp, IS 13162 part 2& IS 1969 Part1 )	-	0	-
6.1 Table 1 viii)(Retention of breaking strength after UV exposure of 144h Weft , IS 13162 part 2& IS 1969 Part1 )	-	0	-
6.1 Table 1 ix)(Welded seam strength before UV exposure (Weft) , IS 1969 Part 1)	-	0	-
6.1 Table 1 x)(Retention of welded seam strength after UV exposure of 144h(Weft) ,IS 13162 part 2& IS 1969 Part1 )	-	0	-
6.1 Table 1 xi)(Trapezoidal tear strength, IS 14293)	-	0	-
6.1 Table 1 xii)(Puncture Resistance, Annex D of IS 7903)	-	0	-
6.1 Table 1 xiii)(Impact Failure load , at 1524 mmdrop, Annex E of IS 7903)	-	0	-
6.1 Table 1 xiv)(Color fastness to light (For color Tarpulines) , IS 2454)	-	0	-
6.1 Table 1 xv)(Ash Content, Annex F of IS 7903)	-	0	-
6.2(Length, IS 7903)	-	0	-
6.2(Width, IS 7903)	-	0	-
6.2(height, IS 7903)	-	0	-
6.3(Water Proofness,IS 7941)	-	0	-
6.3(Water Proofness, IS 7940)	-	0	-
6.2(dimension(l))	-	0	-
6.2(dimension(w))	-	0	-
6.2(dimension(h))	-	0	-
3.3(Eyelets (Dimesnions) i) Starting thickness of metal Aluminium min ii) Outside dia of flange‘A’ iii) Flange formed height ‘B’ iv) Pierced dia ‘C’ v) Overall length ‘D’ vi) Internal dia of Barrel when closed ‘E’ min vii) Thickness of compressed material between eyelet and washer F’ max viii) Outside diameter of barrel under the flange‘G’ )	-	500	-
3.3(Eyelets)	-	0	-
3.2(HDPE Fabric (Material Identification))	-	500	-
3.1(HDPE Tapes (Carbon Black Content))	-	700	HDPE TAPES TO BE PROVIDED BY THE PARTY
3.1(HDPE Tapes (Presence of UV-stabiliser))	-	700	HDPE TAPES TO BE PROVIDED BY THE PARTY
3.1(HDPE Tapes (Material Identification))	-	0	HDPE TAPES TO BE PROVIDED BY THE PARTY
3.1()	-	0	-
3.1()	-	0	-
3.1()	-	0	-
3.1()	-	0	-
4()	-	0	-
7(Marking)	-	0	-
3.1()	-	0	-
5.1.1(Coating Thickness)	-	0	-
5.1.1(Carbon Black Content)	-	0	-
5.1.1(Sandwich lamination thickness)	-	0	-
5.1.1(Mass of Finished Tarpaulin)	-	0	-
5.1.1(UV Exposure (144 hrs))	-	0	-
5.1.1(Agening)	-	0	-
3.1()	-	0	-
3.1()	-	0	-
3.1()	-	0	-
3.1()	-	0	-
4()	-	0	-
7(Marking)	-	0	-
3.1()	-	0	-

31 Dec, 2026

-
Included w.e.f 28.07.2025

3892

Sleen India Biz venture Private Limited, Agra

9139736

IS 8058 (2018)

Pyridine - Specification (First Revision)

Grade 1, Grade 2 and Grade 3

16200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.4 - Table 1 - Sl No - xi(Colour, HU (Pt-Co scale) - IS 8768)	-	1000	-
4.4 - Table 1 - Sl No - x(Moisture content - Annex L)	-	1000	-
4.4 - Table 1 - Sl No - ix(Sulphates (as SO4) - Annex K)	-	1000	-
4.4 - Table 1 - Sl No - viii(Oxidizable substances - Annex J)	-	1000	-
4.4 - Table 1 - Sl No - vii(Copper (as Cu) - Annex H)	-	1000	-
4.4 - Table 1 - Sl No - vi(Chlorides (as Cl) - Annex G)	-	1000	-
4.4 - Table 1 - Sl No - v(Ammonium compounds (as NH4) - Annex E)	-	1000	-
4.4 - Table 1 - Sl No - iv(Residue on evaporation - Annex D)	-	1000	-
4.4 - Table 1 - Sl No - iii(Boiling range at 760 mm Hg - Annex C)	-	1000	-
4.4 - Table 1 - Sl No - ii(Pyridine content - Annex B)	-	3000	-
4.4 - Table 1 - Sl No - i(Relative density at 250C/250C - Annex A)	-	1000	-
4.3(Identity and Purity - (Annex B))	-	3000	-
4.2(Solubility)	-	0	-
4.1(Description)	-	200	-

-
Included w.e.f. 28.07.2025

3893

ARYAVRAT TEST HOUSE PRIVATE LIMITED

5191706

IS 210 (2009)

Grey iron castings - Specification (First Revision)

FG 150 to FG 400

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-	1000	-
7.1(WORKMANSHIP AND FINISH)	-	200	-
10.1(FREEDOM FROM DEFECTS)	-	200	-
10.2(FREEDOM FROM DEFECTS)	-	200	-
13(SIZE OF TEST BARS-Diameter)	-	200	-
13(SIZE OF TEST BARS-Length)	-	200	-
15, Table 3(TENSIL.E TEST- IS 1608 Part1 )	-	1000	-
16, Table 3(Hardness Test)	-	200	-
17,Annex B(TRANSVERSE TEST)	-	1000	-
18(HYDROSTATIC TEST)	-	2000	-
9(IS 7754)	-	500	-
9(IS 7754)	-	500	-
9(Microstructure)	-	500	-
21(Marking)	-	200	-
9(Microstructure)	-	500	-
7.2(Casting dimensions)	-	200	-
Cl-6(Phosprorus (P) - IS 12308 ( P-5))	-	400	-
18(HYDROSTATIC TEST)	-	1000	-
6(Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-	1000	-
7.1(WORKMANSHIP AND FINISH)	-	200	-
10.1(FREEDOM FROM DEFECTS)	-	200	-
10.2(FREEDOM FROM DEFECTS)	-	200	-
13(SIZE OF TEST BARS-Diameter)	-	200	-
13(SIZE OF TEST BARS-Length)	-	200	-
15, Table 3(TENSIL.E TEST- IS 1608 Part1 )	-	200	-
16, Table 3(Hardness Test)	-	200	-
17,Annex B(TRANSVERSE TEST)	-	1000	-

28 Nov, 2028

-
-

3894

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS 302 : Part 2 : Sec 45 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 45 electric heating tools

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Rating)	-	500	5% Discount for BIS
6(Classification)	-	500	-
7(Marking)	-	500	-
8(Protection against Access to Live Parts)	-	1000	-
9(Starting Of Motor Operated Appliances)	-	2000	-
10("Power Input & Current")	-	5000	-
11(Temperature Rise/ Heating)	-	5000	-
12(Operation Under Overload Condition)	-	1000	-
13(Electric Insulation at Operating Temperature)	-	1500	-
14("Radio and Television Interference Suppression / Transient Over Voltage ")	-	2500	-
15(Moisture Resistance)	-	5000	-
16(Insulation Resistance and Electric Strength/ Leakage Current and Electric Strength (After Humidity Treatment))	-	2000	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	5000	-
18(Endurance)	-	5000	-
19(Abnormal Operation)	-	10000	-
20(Stability & Mechanical Hazards)	-	1000	-
21(Mechanical strength)	-	2000	-
22(Construction)	-	5000	-
23(Internal Wiring)	-	2000	-
24(Components)	-	5000	-
25(Supply Connection & External Flexible Cords)	-	5000	-
26(Terminals For External Conductors)	-	2500	-
27(Provision For Earthing)	-	1000	-
28(Screws & Connections)	-	2000	-
29(Creepage Distances & Clearances)	-	5000	-
30(Resistance to Heat, Fire and Tracking)	-	5000	-
31(Radiation hazards)	-	2000	-
XXV of Table 101(Resistance to Rusting)	-	2000	-
4(General Requirement)	-	500	-
19.11.4.7(Harmonics)	-	10000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	10000	-
19.11.4.5(Immunity to conducted discharges)	-	25000	-
19.11.4.4(Surge immunity test)	-	10000	-
19.11.4.3(Fast transient bursts)	-	10000	-
19.11.4.2(Radiated fields)	-	25000	-
19.11.4.1(Electrostatic discharges)	-	10000	-

-
Included w.e.f. 18.08.2025

3895

Accumetrix Testing Solutions Pvt. Ltd.

9188436

IS 383 (2016)

Coarse and Fine Aggregate for Concrete - Specification (Third Revision)

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4.1 (a)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	900	-
5.4.1 (b)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	900	-
5.4.2(a)( Aggregates Impact Value)	-	350	-
5.4.2(b)( Aggregates Impact Value)	-	350	-
5.4.3(a)( Aggregate Abrasion Value)	-	700	-
5.4.3(b)( Aggregate Abrasion Value)	-	700	-
6.1-Table 7(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Nominal Size of aggregate)	-	350	-
6.1-Table 7(i)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 80 mm sieve )	-	100	-
6.1-Table 7(ii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 63 mm sieve )	-	100	-
6.1-Table 7(iii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 40 mm sieve )	-	100	-
6.1-Table 7(iv)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 20 mm sieve )	-	100	-
6.1-Table 7(v)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 16 mm sieve )	-	100	-
6.1-Table 7(vi)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 12.5 mm sieve )	-	100	-
6.1-Table 7(vii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 10 mm sieve )	-	100	-
6.1-Table 7(viii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 4.75 mm sieve )	-	100	-
6.1-Table 7(ix)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 2.36 mm sieve )	-	100	-
6.1.1-Table 8(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Class)	-	350	-
6.1.1-Table 8(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Size)	-	350	-
6.1.1-Table 8(i)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 80 mm Sieve)	-	100	-
6.1.1-Table 8(ii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 80 mm Sieve)	-	100	-
6.1.1-Table 8(ii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 40 mm Sieve)	-	100	-
6.1.1-Table 8(iii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 40 mm Sieve)	-	100	-
6.1.1-Table 8(iii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 20 mm Sieve)	-	100	-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 20 mm Sieve)	-	100	-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 4.75 mm Sieve)	-	100	-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 2.36 mm Sieve)	-	100	-
6.2-Table 7(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Nominal Size of aggregate)	-	350	-
6.2-Table 7(i)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 80 mm sieve)	-	100	-
6.2-Table 7(ii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 63 mm sieve)	-	100	-
6.2-Table 7(iii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 40 mm sieve)	-	100	-
6.2-Table 7(iv)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 20 mm sieve)	-	100	-
6.2-Table 7(v)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 16 mm sieve)	-	100	-
6.2-Table 7(vi)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 12.5 mm sieve)	-	100	-
6.2-Table 7(vii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 10 mm sieve)	-	100	-
6.2-Table 7(viii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 4.75 mm sieve)	-	100	-
6.2-Table 7(ix)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 2.36 mm sieve)	-	100	-
6.3-Table 9(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Grading Zone)	-	350	-
6.3-Table 9(i)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 10mm Sieve )	-	100	-
6.3-Table 9(ii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 4.75mm Sieve )	-	100	-
6.3-Table 9(iii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 2.36mm Sieve )	-	100	-
6.3-Table 9(iv)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 1.18mm Sieve )	-	100	-
6.3-Table 9(v)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 600µm Sieve )	-	100	-
6.3-Table 9(vi)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 300µm Sieve )	-	100	-
6.3-Table 9(vii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 150µm Sieve )	-	100	-
6.4-Table 10(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Nominal Size )	-	350	-
6.4-Table 10(i)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 80mm Sieve )	-	100	-
6.4-Table 10(ii)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 40mm Sieve )	-	100	-
6.4-Table 10(iii)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 20mm Sieve )	-	100	-
6.4-Table 10(iv)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 4.75mm Sieve )	-	100	-
6.4-Table 10(v)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 600µm Sieve )	-	100	-
6.4-Table 10(vi)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 150µm Sieve )	-	100	--
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(fine aggregate))	-	400	-
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (fine aggregate))	-	400	-
5.7-Table-3-(III) IS:14959 (P-2)(Water soluble chloride content (fine aggregate))	-	400	-
5.7-Table-3-(II) IS:4032(Total sulphate content (fine aggregate))	-	400	-
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (fine aggregate))	-	1500	-
5.5-IS: 2386 (P-5)(Soundness (fine aggregate))	-	1500	-
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Organic impurities (fine aggregate))	-	500	-
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (fine aggregate))	-	1000	-
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (fine aggregate))	-	1000	-
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (fine aggregate ))	-	1000	-
5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (fine aggregate ))	-	1000	-
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(coarse aggregate))	-	400	-
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (coarse aggregate))	-	400	-
5.7-Table-3-(III) BN EN: 1744(Water soluble chloride content (coarse aggregate))	-	400	-
5.7-Table-3-(II) BN EN: 1744(Total sulphate content (coarse aggregate))	-	400	-
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (coarse aggregate))	-	1500	-
5.5-IS: 2386 (P-5)(Soundness (coarse aggregate))	-	1500	-
5.3-IS: 2386 (P-1)(Combined elongation & flakiness index (coarse aggregate))	-	800	-
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (coarse aggregate))	-	1000	-
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (coarse aggregate))	-	1000	-
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (coarse aggregate ))	-	1000	-
5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (coarse aggregate ))	-	1000	-
7.2(Bulk Density loose)	-	1000	-
7.2(Bulk Density Rodded)	-	1000	-
7.2(Bulk Density loose)	-	1000	-
7.2(Bulk Density Rodded)	-	1000	-
5.3(Elongation Index)	-	800	-
5.3(Flakiness Index)	-	800	-
5.6(Alkali Agregate Reaction )	-	1500	-
5.7 table 3(WaterAbsorption)	-	400	-
5.7 table 3(Specific Gravity)	-	400	-
5.3(Flakiness & Elongation)	-	800	-
5.5 Na2so4/5.5.1 Maso4/5.5.1 (Soundness)	-	1500	-
5.5 Na2so4/5.5.1 Maso4/5.5.1 (Soundness)	-	1500	-
5.2 (5.2.2, 5.2.1, 5.2.3, shale table-2 ) (Deleterious material (Clay lumps, coal & lignite, material finer than 75 micron IS sieve, Soft fragments,shale))	-	1000	-
3.2.2 Table 3 ii) IS 1963(Basicity as CaO/SiO2)	-	1500	-
Clause 5.6(Dissolved Silica)	-	1500	-
Clause 5.6(Reduction in Alkalinity)	-	1500	-
5.5(Soundness By Magnesium Sulphate)	-	1500	-
5.5(Soundness By Magnesium Sulphate)	-	1500	-
5.2- TABLE-2- (iv) IS-2386 (P-2)(Soft fragments (coarse aggregate))	-	400	-
Clause 5.1(General)	-	300	-
5.2- TABLE-2- (Note-3) IS-2386 (P-2)(Mica content (fine aggregate))	-	200	-
7.2(Bulking Of Fine Aggregate)	-	200	-
Clause 5.7- Table 3 (i) (TotalAlkali content as Na2O equivalent )	-	300	-

19 Sep, 2028

-
Scope restricted to Aggregates from natural Resources only.

3896

Sleen India Biz venture Private Limited, Agra

9139736

IS 14708 (1999)

Ethyl acrylate - Specification

19500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Packing)	-	250	-
4.2(Marking)	-	250	-
3.0- Table -1, Sl no. 1(Assay, percent by mass, Annex A)	-	5500	-
3.0- Table -1, Sl no. 2(Acidity (as acrylic acid), percent by mass, Annex B)	-	3000	-
3.0- Table -1, Sl no. 3(Colour, Pt-Co scale, IS 8768)	-	3000	-
3.0- Table -1, Sl no. 4(Water, percent by mass, IS 2362)	-	3000	-
3.0- Table -1, Sl no. 5(Inhibitors (as methyl etherhydroquinone), ppm, Annex C)	-	4500	-

-
Included w.e.f 28.07.2025

3897

Sleen India Biz venture Private Limited, Agra

9139736

IS 11557 (1986)

Specification for 2 - Naphthylamine - 3 : 6 : 8 - Trisulphonic acid, technical

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(Description)	-	1000	-
2.2-Table 1-(i)(Matter insoluble in dilute sodium carbonate)	-	3000	-
2.2-Table 1-(ii)(Assay ( on dry basis ), percent by mass)	-	3000	-
2.2-Table 1-(iii)(Amide G. acid, percent by masss)	-	3500	-
3.1(Packing)	-	1000	-
3.2(Marking)	-	500	-

-
Included w.e.f. 28.07.2025

3898

Accumetrix Testing Solutions Pvt. Ltd.

9188436

IS 456 (2000)

Plain and reinforced concrete - Code of practice (Fourth Revision)

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
16.1(Average Compressive Strength)	-	3000	3000 for cube compressive strength
16.1(Compressive Strength of Individual Samples )	-	3000	3000 for cube compressive strength
16.1(Compressive Strength of Individual Samples )	-	3000	3000 for cube compressive strength
16.1(Compressive Strength of Individual Samples )	-	3000	3000 for cube compressive strength
17.4(Core test)	-	3000	3000 for cube compressive strength
5.4-Table-1 (v)-IS: 3025(P-17)(Suspended matter)	-	100	-
5.4-Table-1 (iv)-IS: 3025(P-32)(Chloride)	-	150	-
5.4-Table-1 (iii)-IS: 3025(P-32)(Chloride)	-	150	-
5.4-Table-1 (ii)-IS: 3025(P-24)(Sulphate)	-	100	-
5.4-Table-1 (i)-IS: 3025(P-18)(In-Organic)	-	100	-
5.4-Table-1 (i)-IS: 3025(P-18)(Organic )	-	100	-
5.4.2-IS: 3025(P-11)(Ph)	-	100	-
5.4-(b)-IS: 3025 (P-23)(Volume of 0.02 N H2SO4 to neutralized 100 ml of water using mixed indicator)	-	100	-
5.4-(a)-IS: 3025 (P-22)(Volume of 0.02 N NaOH to neutralized 100 ml of water using phenolphthalein indicator)	-	100	-
Cl 5.4 Table 1 (v)(Suspended Matter)	-	100	-
Cl 5.4 Table 1 (iv)(Chloride)	-	150	-
Cl 5.4 Table 1 (iii)(Sulphate)	-	100	-
Cl 5.4 Table 1 (ii)(Inorganic Solids)	-	100	-
Cl 5.4 Table 1 (i)(Organic Solids)	-	100	-
Cl 5.4 .2(pH)	-	100	-
Cl 5.4 (b)(Alkalinity)	-	100	-
Cl 5.4 (a)(Acidity)	-	100	-

19 Sep, 2028

-
For Construction Water only For Compressive Strength only

3899

Accumetrix Testing Solutions Pvt. Ltd.

9188436

IS 5820 (2024)

PRECAST CONCRETE CABLE COVERS â SPECIFICATION (first revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-7.2(Dimensions)	-	2000	-
Cl-7.3(Impact Strength)	-	6000	-
Cl-7.1(cable covers)	-	2000	-

19 Sep, 2028

-
Exclusion: Materials Cl-4, Design Cl-6 (Optional)

3900

THE SOUTH INDIA TEXTILE RESEARCH ASSOCIATION (SITRA), COIMBATORE

6165234

IS 17334 (2025)

Textiles - Medical/Surgical Gowns and Medical/Surgical Drapes - Specification (First Revision)

Surgical Gown and Surgical Drape

47500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(Workmanship and Finish)	-	250	Level 1 - Rs.11,500 Level 2 - Rs.33,500 Level 3 - Rs.47,500 Level 4 - Rs.31,700
Cl-5.1, 6.2 Table-1 (i)(Impact penetration (g))	-	2500	Testing will be done at 6 locations
Cl-5.1, 6.2 Table-1 (ii)(Hydrostatic resistance (cmwc), the rate of rising at 60 cmwc/min)	-	3800	Testing will be done at 8 locations
Cl-5.1, 6.2 Table-1 (iii)(Blood penetration resistance, pressure cycle upto 14 kPa, procedure D)	-	4500	-
Cl-5.1, 6.2 Table-1 (iv)(Viral penetration resistance, pressure cycle upto 14 kPa, procedure D)	-	10000	-
Cl-5.1, 6.2 Table-1 (v)(Particle release)	-	4500	-
Cl-5.1, 6.2 Table-1 (vi)(Tensile strength (dry and wet) (N))	-	1500	Dry and wet in machine and cross direction
Cl-5.1, 6.2 Table-1 (vii)(Bursting strength (dry and wet) (kPa))	-	1100	Dry and wet condition
Cl-5.1, 6.2 Table-1 (viii)(Cleanliness-microbial (CFU/100 cm2))	-	3050	-
Cl-5.1, 6.2 Table-1 (ix)(Resistance to microbial penetration — Dry (CFU))	-	10000	-
Cl-5.1, 6.2 Table-1 (x)(Resistance to microbial penetration — Wet (IB))	-	14000	-
Cl-5.1, 6.2 Table-1 (xi) (1)("Biocompatibility evaluation test - Cytotoxicity")	-	2600	-
Cl-5.1, 6.2 Table-1 (xii)("Breathability test (water vapour transmission rate), [g/m2/day, Max]")	-	3700	-
Cl-5.1, 6.2 Table-2 (i)(Impact penetration (g))	-	0	Parameter Repeated
Cl-5.1, 6.2 Table-2 (ii)(Hydrostatic resistance (cmwc), the rate of rising at 60 cmwc/min)	-	0	Parameter Repeated
Cl-5.1, 6.2 Table-2 (iii)(Blood penetration resistance, pressure cycle upto 14 kPa, procedure D)	-	0	Parameter Repeated
Cl-5.1, 6.2 Table-2 (iv)(Particle release)	-	0	Parameter Repeated
Cl-5.1, 6.2 Table-2 (v)(Tensile strength (dry and wet) (N))	-	0	Parameter Repeated
Cl-5.1, 6.2 Table-2 (vi)(Bursting strength (dry and wet) (kPa))	-	0	Parameter Repeated
Cl-5.1, 6.2 Table-2 (vii)(Cleanliness-microbial (CFU/100 cm2))	-	0	Parameter Repeated
Cl-5.1, 6.2 Table-2 (viii)(Resistance to microbial penetration — Dry (CFU))	-	0	Parameter Repeated
Cl-5.1, 6.2 Table-2 (ix)(Resistance to microbial penetration — Wet (IB))	-	0	Parameter Repeated
Cl-5.1, 6.2 Table-2 (x) (1)("Biocompatibility evaluation test - Cytotoxicity")	-	0	Parameter Repeated
Cl-5.3(Barrier Properties)	-	250	-
Cl-7(Marking)	-	250	-
Cl-4(Workmanship and Finish)	-	0	Parameter repeated
Cl-5.1, 6.2 Table-1 (i)(Impact penetration (g))	-	0	Parameter repeated
Cl-5.1, 6.2 Table-1 (ii)(Hydrostatic resistance (cmwc), the rate of rising at 60 cmwc/min)	-	0	Parameter repeated
Cl-5.1, 6.2 Table-1 (iii)(Blood penetration resistance, pressure cycle upto 14 kPa, procedure D)	-	0	Parameter repeated
Cl-5.1, 6.2 Table-1 (iv)(Viral penetration resistance, pressure cycle upto 14 kPa, procedure D)	-	0	Parameter repeated
Cl-5.1, 6.2 Table-1 (v)(Particle release)	-	0	Parameter repeated
Cl-5.1, 6.2 Table-1 (vi)(Tensile strength (dry and wet) (N))	-	0	Parameter repeated
Cl-5.1, 6.2 Table-1 (vii)(Bursting strength (dry and wet) (kPa))	-	0	Parameter repeated
Cl-5.1, 6.2 Table-1 (viii)(Cleanliness-microbial (CFU/100 cm2))	-	0	Parameter repeated
Cl-5.1, 6.2 Table-1 (ix)(Resistance to microbial penetration — Dry (CFU))	-	0	Parameter repeated
Cl-5.1, 6.2 Table-1 (x)(Resistance to microbial penetration — Wet (IB))	-	0	Parameter repeated
Cl-5.1, 6.2 Table-1 (xi) (1)("Biocompatibility evaluation test - Cytotoxicity")	-	0	Parameter repeated
Cl-5.1, 6.2 Table-1 (xii)("Breathability test (water vapour transmission rate), [g/m2/day, Max]")	-	0	Parameter repeated
Cl-5.1, 6.2 Table-2 (i)(Impact penetration (g))	-	0	Parameter repeated
Cl-5.1, 6.2 Table-2 (ii)(Hydrostatic resistance (cmwc), the rate of rising at 60 cmwc/min)	-	0	Parameter repeated
Cl-5.1, 6.2 Table-2 (iii)(Blood penetration resistance, pressure cycle upto 14 kPa, procedure D)	-	0	Parameter repeated
Cl-5.1, 6.2 Table-2 (iv)(Particle release)	-	0	Parameter repeated
Cl-5.1, 6.2 Table-2 (v)(Tensile strength (dry and wet) (N))	-	0	Parameter repeated
Cl-5.1, 6.2 Table-2 (vi)(Bursting strength (dry and wet) (kPa))	-	0	Parameter repeated
Cl-5.1, 6.2 Table-2 (vii)(Cleanliness-microbial (CFU/100 cm2))	-	0	Parameter repeated
Cl-5.1, 6.2 Table-2 (viii)(Resistance to microbial penetration — Dry (CFU))	-	0	Parameter repeated
Cl-5.1, 6.2 Table-2 (ix)(Resistance to microbial penetration — Wet (IB))	-	0	Parameter repeated
Cl-5.1, 6.2 Table-2 (x) (1)("Biocompatibility evaluation test - Cytotoxicity")	-	0	Parameter repeated
Cl-5.3(Barrier Properties)	-	0	Parameter repeated
Cl-7(Marking)	-	0	Parameter repeated

-
Included w.e.f.01.09.2025 Exclusion Cl-5.1, 6.2 Table-1 (xi) (2) ("Biocompatibility evaluation test - Irritation") Cl-5.1, 6.2 Table-1 (xi) (3) ("Biocompatibility evaluation test - Skin sensitization")

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number