BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15123 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

451

QUALITY INTERNATIONAL RESEARCH & LABORATORIES PRIVATE LIMITED

5197006

IS 432 : Part 2 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 2 Hard-Drawn Steel Wire

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4.1(Workmanship)	-	500	-
Cl 5 & 6(Diameter)	-	500	-
Cl 7(UTM)	-	1500	-
Cl 8.3(Bending To Both Side At 90°, Then Straight)	-	1500	-
Cl 4.1(Workmanship)	-	500	-
Cl 5 & 6(Diameter)	-	500	-
Cl 7(UTM)	-	1500	-
Cl 8.3(Bending To Both Side At 90°, Then Straight)	-	1500	-
Cl 4.1(Workmanship)	-	500	-
Cl 5 & 6(Diameter)	-	500	-
Cl 7(UTM)	-	1500	-
Cl 8.3(Bending To Both Side At 90°, Then Straight)	-	1500	-
Clause 3.1.1(Sulphur)	-	500	-
Clause 3.1.1(Phosphorus)	-	500	-
Cl. 7.1(Elongation)	-	500	-
Cl. 7.1(Proof Stress 0.2 %)	-	1500	-
Cl. 6.2(Length)	-	500	-
Clause 3(Nitrogen)	-	500	-
Clause 3(Nitrogen)	-	500	-
Clause 7.1(Total Elongation over a gauge length of 8 D Where D is the dia of wire)	-	1500	-
Clause 7.1(Proof Stress (0.2 percent ))	-	1500	-
Clause 7.1(Ultimate Tensile Stress)	-	1500	-
Cl 8.3(Bending To Both Side At 90°, Then Straight)	-	1500	-
Cl 7(UTM)	-	1500	-
Cl 5 & 6(Diameter)	-	500	-
Cl 4.1(Workmanship)	-	500	-
Clause 8.3(IS 1716)	-	500	-
Clause 7.1(IS 1608 Part 1)	-	1500	-
Clause 8.3(IS 1716)	-	500	-
Clause 7.1(IS 1608 Part 1)	-	1500	-
Clause 8.3(Reverse Bend test)	-	1500	-
7.0 & 7.1(0.2% Proof Strength - IS: 1608 (P1))	-	1500	-
7.0 & 7.1(Elongation on SoA 5.65mm GL - IS: 1608 (P1))	-	1500	-
10(Marking)	-	500	-
Clause 7.1(Ultimate tensile stress)	-	1500	-
Clause 8.3(Reverse Bend test)	-	1500	-
Clause 8.3(Reverse Bend test)	-	1500	-

-
Included w.e.f 16.03.2026

452

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 16703 (2017)

Textiles - High density polyethylene (HDPE) polypropylene (PP) woven sacks for packaging of 25 kg polymer materials - Specification

32200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Mass of Bale)	-	500	-
5.2 Table 1(Dimensions)	-	500	-
5.2 Table 1(Dimensions)	-	500	-
5.2 Table 1(Dimensions)	-	500	-
5.2 Table 1(Dimensions)	-	500	-
5.2 Table 1(Ends per dm)	-	500	-
5.2 Table 1(Picks per dm)	-	500	-
5.2 Table 1(Mass of sack, Gusseted type, g - IS 1964)	-	500	-
5.2 Table 1(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N) (kgf): - IS 1969 (Part 1))	-	3000	-
5.2 Table 1(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N2) (kgf): - IS 1969 (Part 1))	-	3000	-
5.2 Table 1(Breaking strength of bottom seam (Ravelled strip method), Min, N) (kgf) - IS 9030)	-	3000	-
5.2 Table 1(Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-	3000	-
5.2 Table 1(Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-	3000	-
5.2 Table 1(Drop impact strength)	-	200	-
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,a) For UV stabilized sacks)	-	3000	-
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,b) For non- UV stabilized sacks)	-	11000	-
4.6(Capacity)	-	250	-
4.3.1(Bottom Seam)	-	250	-
4.3(Sacks)	-	250	-
4.2,5.1,5.2,5.3,5.4(Breaking strenght after U.V. Exposure (Warp/Weft))	-	3000	-
4.2,5.1,5.2,5.3,5.4,(UV Resistance (192 hrs)(100 x 65+92x40))	-	11000	-
4.2(Linear Density)	-	500	-
4.2(Width of tape)	-	500	-
Cl-4.4(Lamination Mass)	-	250	-
Cl-4.5(Liner- Thickness)	-	250	-
Cl-4.2 (Amendment No-2)(un-laminated fabric mass)	-	250	-
Cl-4.5(Liner- Width)	-	250	-
Cl-4.5(Liner- Visible defects)	-	250	-

-
included w.e.f 16.03.2026

453

QUALITY INTERNATIONAL RESEARCH & LABORATORIES PRIVATE LIMITED

5197006

IS 17404 (2020)

Electrogalvanized Hot Rolled and Cold Reduced Carbon Steel Sheets and Strips ” Specification

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(C -IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Mn - IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(P - IS 228 )	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(S - IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(N - IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Al - IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Si - IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Cu - IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Micro alloy element- IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Boron in micro alloy element- IS 228)	-	500	-
7.1 (As per IS 5986)(CE- IS 228)	-	500	-
8.3.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Yield strength - IS 1608(Pt-1))	-	500	-
8.3.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Tensile Strength - IS 1608(Pt-1))	-	500	-
8.3.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Elongation - IS 1608(Pt-1))	-	500	-
9.1, 9.1.1-Table 1(Coating Mass per Surface, Min - IS 12860 & IS 6745)	-	500	-
9.1, 9.1.1-Table 1(Coating Mass per Surface, Max - IS 12860 & IS 6746)	-	500	-
9.2.2-Table 2(Coating Adhesion Test- IS 17404)	-	500	-
10.1(Coil Internal Diameter-IS17404)	-	500	-
10.2 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Width)	-	500	-
10.2 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Length)	-	500	-
10.2 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Thickness)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(C -IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Mn - IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(P - IS 228 )	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(S - IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(N - IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Al - IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Si - IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Cu - IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Micro alloy element- IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Boron in micro alloy element- IS 228)	-	500	-
7.1 (As per IS 5986)(CE- IS 228)	-	500	-
8.3.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Yield strength - IS 1608(Pt-1))	-	500	-
8.3.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Tensile Strength - IS 1608(Pt-1))	-	500	-
8.3.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Elongation - IS 1608(Pt-1))	-	500	-
9.1, 9.1.1-Table 1(Coating Mass per Surface, Min - IS 12860 & IS 6745)	-	500	-
9.1, 9.1.1-Table 1(Coating Mass per Surface, Max - IS 12860 & IS 6746)	-	500	-
9.2.2-Table 2(Coating Adhesion Test- IS 17404)	-	500	-
10.1(Coil Internal Diameter-IS17404)	-	500	-
10.2 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Width)	-	500	-
10.2 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Length)	-	500	-
10.2 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Thickness)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(C -IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Mn - IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(P - IS 228 )	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(S - IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(N - IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Al - IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Si - IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Cu - IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Micro alloy element- IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Boron in micro alloy element- IS 228)	-	500	-
7.1 (As per IS 5986)(CE- IS 228)	-	500	-
8.3.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Yield strength - IS 1608(Pt-1))	-	500	-
8.3.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Tensile Strength - IS 1608(Pt-1))	-	500	-
8.3.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Elongation - IS 1608(Pt-1))	-	500	-
9.1, 9.1.1-Table 1(Coating Mass per Surface, Min - IS 12860 & IS 6745)	-	500	-
9.1, 9.1.1-Table 1(Coating Mass per Surface, Max - IS 12860 & IS 6746)	-	500	-
9.2.2-Table 2(Coating Adhesion Test- IS 17404)	-	500	-
10.1(Coil Internal Diameter-IS17404)	-	500	-
10.2 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Width)	-	500	-
10.2 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Length)	-	500	-
10.2 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Thickness)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(C -IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Mn - IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(P - IS 228 )	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(S - IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(N - IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Al - IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Si - IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Cu - IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Micro alloy element- IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Boron in micro alloy element- IS 228)	-	500	-
7.1 (As per IS 5986)(CE- IS 228)	-	500	-
8.3.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Yield strength - IS 1608(Pt-1))	-	500	-
8.3.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Tensile Strength - IS 1608(Pt-1))	-	500	-
8.3.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Elongation - IS 1608(Pt-1))	-	500	-
9.1, 9.1.1-Table 1(Coating Mass per Surface, Min - IS 12860 & IS 6745)	-	500	-
9.1, 9.1.1-Table 1(Coating Mass per Surface, Max - IS 12860 & IS 6746)	-	500	-
9.2.2-Table 2(Coating Adhesion Test- IS 17404)	-	500	-
10.1(Coil Internal Diameter-IS17404)	-	500	-
10.2 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Width)	-	500	-
10.2 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Length)	-	500	-
10.2 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Thickness)	-	500	-
13.1(Marking)	-	500	-
13.1(Marking)	-	500	-

-
Included w.e.f 16.03.2026

454

QUALITY INTERNATIONAL RESEARCH & LABORATORIES PRIVATE LIMITED

5197006

IS 18513 (2023)

Hot-Dip Zinc- Aluminium-Magnesium Alloy Coated Steel Sheets Plates and Strips - Specification

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 5.4(Surface Finish)	-	500	-
Clause. 7.0(Material)	-	500	-
Clause. 8.0(Coating Adherence)	-	500	-
Clause. 8.0(Coating Mass)	-	500	-
Clause. 10.0(Tensile Test)	-	2500	-
Clause. 10.0(Yield Stress or Proof stress)	-	1500	-
Clause. 10.0(Elongation)	-	2500	-
Clause. 10.0(Plastic strain Ratio)	-	2500	-
Clause. 10.0(Tensile Strain Hardening Component)	-	2500	-
Clause. 10.0(Bake Hardening Index)	-	3500	-
Clause. 10.0(Hardness Test)	-	1500	-
Clause. 10.0(Bend Test)	-	500	-
Clause.11.0(Dimensions, Shape & Tolerances)	-	500	-
7(C)	-	500	-
7(Mn)	-	500	-
7(P)	-	500	-
7(S)	-	500	-
7(Si)	-	500	-
7(N)	-	500	-
7(Cr)	-	500	-
7(Mo)	-	500	-
7(Ni)	-	500	-
7(Al)	-	500	-
7(B)	-	500	-
7(Ti)	-	500	-
7(V)	-	500	-
7(Nb)	-	500	-

-
Included w.e.f 16.03.2026

455

JBS TESTING SOLUTIONS (Unit-2) (24), Jalandhar

9172306

IS 16205 : Part 24 (2017)

Conduit Systems for Cable Management part 24 Particular Requirements Conduit Systems Buried Under Ground

Except EMI/EMC

33500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.1(Classification - Resistance to Compression)	-	5000	-
6.1.2(Classification - Resistance to Impact)	-	5000	-
6.1.3(Classification - Resistance to Bending)	-	5000	-
6.1.4 of IS 16205 (Part 1) : 2017(Classification - Tensile Strength)	-	3500	For complete dimensions and other qualitative tests
6.1.5 of IS 16205 (Part 1) : 2017(Classification - Suspended Load Capacity)	-	5000	-
6.3 of IS 16205 (Part 1) : 2017(Classification - According to Electrical Characteristics)	-	5000	-
6.4 of IS 16205 (Part 1) : 2017(Classification - According to Resistance to External Influences)	-	5000	-
6.5 of IS 16205 (Part 1) : 2017(Classification - According to Resistance to Flame Propogation)	-	0	-
7.1(Marking and Documentation)	-	0	-
7.1.2(Marking and Documentation)	-	0	-
7.1.3(Marking and Documentation)	-	0	-
7.1.101(Marking and Documentation)	-	0	-
7.2(Marking and Documentation)	-	0	-
7.5 of IS 16205 (Part 1) : 2017(Marking and Documentation)	-	0	-
7.6 of IS 16205 (Part 1) : 2017(Marking and Documentation)	-	0	-
7.101(Marking and Documentation)	-	0	-
7.102(Marking and Documentation)	-	0	-
8 Table 101(Dimensions)	-	0	-
8 Table 101(Dimensions)	-	3500	For dimensions and other qualitative tests
9.1 of IS 16205 (Part 1) : 2017(Construction)	-	0	-
9.2 of IS 16205 (Part 1) : 2017(Construction)	-	0	-
9.4 of IS 16205 (Part 1) : 2017(Construction)	-	0	-
9.5 of IS 16205 (Part 1) : 2017(Construction)	-	0	-
9.6 of IS 16205 (Part 1) : 2017(Construction)	-	0	-
10.1(Mechanical Strength)	-	0	-
10.2(Compression Test)	-	0	-
10.3(Impact Test)	-	0	-
10.4(Bending Test)	-	0	-
13.1.3(Spread of fire)	-	0	-
13.1.3.1(Spread of fire)	-	0	-
13.1.3.2(Spread of fire)	-	0	-
14.0(External Influences)	-	0	-
14.2 of IS 16205 (Part 1) : 2017(Resistance against corrosion)	-	0	-
15.0(Electromagnetic Compatibility)	-	0	-
15(Mech)(Electromagnetic Compatibility)	-	0	-
14.2 of IS 16205 (Part 1) : 2017(Mech)(Resistance against corrosion)	-	0	-
14(Mech)(External Influences)	-	0	-
13.1.3.2(Mech)(Spread of fire)	-	0	-
13.1.3.1(Mech)(Spread of fire)	-	0	-
13.1.3(Mech)(Spread of fire)	-	0	-
10.4(Mech)(Bending Test)	-	0	-
10.3(Mech)(Impact Test)	-	0	-
10.2(Mech)(Compression Test)	-	0	-
10.1(Mech)(Mechanical Strength )	-	0	-
9.6 of IS 16205 (Part 1) : 2017(Mech)(Construction)	-	0	-
9.5 of IS 16205 (Part 1) : 2017(Mech)(Construction)	-	0	-
9.4 of IS 16205 (Part 1) : 2017(Mech)(Construction)	-	0	-
9.2 of IS 16205 (Part 1) : 2017(Mech)(Construction)	-	0	-
9.1 of IS 16205 (Part 1) : 2017(Mech)(Construction)	-	0	-
8 Table 101(Mech)(Dimensions)	-	0	-
8 Table 101(Mech)(Dimensions)	-	0	-
7.102(Mech)(Marking and Documentation)	-	0	-
7.101(Mech)(Marking and Documentation)	-	0	-
7.6 of IS 16205 (Part 1) : 2017(Mech)(Marking and Documentation)	-	0	-
7.5 of IS 16205 (Part 1) : 2017(Mech)(Marking and Documentation)	-	0	-
7.2(Mech)(Marking and Documentation)	-	0	-
7.1.101(Mech)(Marking and Documentation)	-	0	-
7.1.3(Mech)(Marking and Documentation)	-	0	-
7.1.2(Mech)(Marking and Documentation)	-	0	-
7.1(Mech)(Marking and Documentation)	-	0	-
6.5 of IS 16205 (Part 1) : 2017(Mech)(Classification - According to Resistance to Flame Propogation)	-	0	-
6.4 of IS 16205 (Part 1) : 2017(Mech)(Classification - According to Resistance to External Influences)	-	0	-
6.3 of IS 16205 (Part 1) : 2017(Mech)(Classification - According to Electrical Characteristics)	-	0	-
6.1.5 of IS 16205 (Part 1) : 2017(Mech)(Classification - Suspended Load Capacity)	-	0	-
6.1.4 of IS 16205 (Part 1) : 2017(Mech)(Classification - Tensile Strength)	-	0	-
6.1.3(Mech)(Classification - Resistance to Bending)	-	0	-
6.1.2(Mech)(Classification - Resistance to Impact)	-	0	-
6.1.1 (Mech)(Classification - Resistance to Compression)	-	0	-

22 May, 2026

-
1. 6.4 of IS 16205 (Part 1) : 2017(Mech) (Classification - According to Resistance to External Influences) Resistance to external influence Except EMC Testing

456

QUALITY INTERNATIONAL RESEARCH & LABORATORIES PRIVATE LIMITED

5197006

IS 18385 (2023)

Hot- Dip galvanized/galvannealed Steels Sheet and strips for Automotive Applications- Specification

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 4.5(Surface Finish)	-	500	-
Clause. 5.0(Material)	-	500	-
Clause. 8.0(Tensile Test)	-	1500	-
Clause. 8.0(Yield Stress or Proof stress)	-	1500	-
Clause. 8.0(Elongation)	-	1500	-
Clause. 8.0(Plastic strain Ratio)	-	1500	-
Clause. 8.0(Tensile Strain Hardening Component)	-	1500	-
Clause. 8.0(Bake Hardening Index)	-	2500	-
Clause. 8.0(Hole Expansion Ratio)	-	2500	-
Clause. 8.0(Bend Test)	-	500	-
Clause.9.0(Coating Mass)	-	500	-
Clause.9.0(Coating Adherence)	-	500	-
Clause.10.0(Dimensions, Shape & Tolerances)	-	500	-
Clause.11.0(Freedom From Defects)	-	500	-
Clause.19.0(Mass)	-	500	-
7(C)	-	500	-
7(Mn)	-	500	-
7(S)	-	500	-
7(P)	-	500	-
7(Si)	-	500	-
7(B)	-	500	-
7(Ti)	-	500	-
7(Nb)	-	500	-
7(V)	-	500	-
7(N)	-	500	-
7(Al)	-	500	-
7(Cr)	-	500	-
7(Mo)	-	500	-
7(Ni)	-	500	-
6.4(Zinc and zinc alloy ingots used for Galvanizing)	-	2500	-

-
Included w.e.f 16.03.2026

457

QUALITY INTERNATIONAL RESEARCH & LABORATORIES PRIVATE LIMITED

5197006

IS 9295 (1983)

Specification for steel tubes for idlers for belt conveyors (First Revision)

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Sulphur- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	500	-
7.1(Phosphorous- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	500	-
8.1.1 Table 1(Tensile Strength- IS 1608(1))	-	500	-
8.1.1 Table 1(Yield Strength- IS 1608)	-	500	-
8.1.1 Table 1(Elongation Percent- IS 1608)	-	500	-
8.2(Drift Expansion Test- IS 2335)	-	500	-
8.3(Flattening Test- IS 2328)	-	500	-
9.1 Table 2(Outside Diameter)	-	500	-
9.1 Table 2(Thickness)	-	500	-
9.1 Table 2(Mass)	-	500	-
10(Hardness)	-	500	-
13.1.1(Ovality)	-	500	-
13.1.2(Eccentricity)	-	500	-
15.1(Straightness)	-	500	-
16.1(Length)	-	500	-
17.1(Surface Protection)	-	500	-
14.0(Workmanship)	-	500	-
6.2(Fin height)	-	500	-

-
Included w.e.f 16.03.2026

458

QUALITY INTERNATIONAL RESEARCH & LABORATORIES PRIVATE LIMITED

5197006

IS 4270 (2001)

Steel tubes used for water wells specification (Third Revision)

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6(Tensile Test & Flattening Test)	-	500	-
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	500	-
Cl 9(Pipe ends, Angle of bevel & Root Face )	-	500	-
Cl 10(Outer Diameter & Overall Length)	-	500	-
Cl 12(Bituminous Coating & Galvanizing )	-	500	-
Cl 14(Workmanship)	-	500	-
Cl 6(Tensile Test & Flattening Test)	-	500	-
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	500	-
Cl 9(Pipe ends, Angle of bevel & Root Face )	-	500	-
Cl 10(Outer Diameter & Overall Length)	-	500	-
Cl 12(Bituminous Coating & Galvanizing )	-	500	-
Cl 14(Workmanship)	-	500	-
Cl 6(Tensile Test & Flattening Test)	-	500	-
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	500	-
Cl 9(Pipe ends, Angle of bevel & Root Face )	-	500	-
Cl 10(Outer Diameter & Overall Length)	-	500	-
Cl 12(Bituminous Coating & Galvanizing )	-	500	-
Cl 14(Workmanship)	-	500	-
5.2(phosphorus)	-	500	-
5.2(sulphur)	-	500	-
Cl 14(Workmanship)	-	500	-
Cl 12(Bituminous Coating & Galvanizing )	-	500	-
Cl 10(Outer Diameter & Overall Length)	-	500	-
Cl 9(Pipe ends, Angle of bevel & Root Face )	-	500	-
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	500	-
Cl 6(Tensile Test & Flattening Test)	-	500	-
Cl 6(Tensile Test & Flattening Test)	-	500	-
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	500	-
Cl 9(Pipe ends, Angle of bevel & Root Face)	-	500	-
Cl 10(Outer Diameter & Overall Length)	-	500	-
Cl 12(Bituminous Coating & Galvanizing)	-	500	-
Cl 14(Workmanship)	-	500	-
11.0(Alignment test IS 4270: 2001)	-	500	-

-
Included w.e.f 16.03.2026 Exclusion: Cl. 8 (Hydrostatic test)

459

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 11652 (2017)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg cement – Specification (third revision)

24800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	400	-
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	250	-
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	250	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	250	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	250	-
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	250	-
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	250	-
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	250	-
4.1(Raw Material )	-	1000	-
4.2 (Fabric)	-	0	-
4.2 (Linear Density, 900 denier)	-	1000	-
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	250	-
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	500	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	0	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
4.3(Sacks)	-	1000	-
4.4(Seam )	-	1000	-
4.4(Seam )	-	0	-
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	0	-
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0	-
4.4(Seam The stitching shall be done with double fold over seam to)	-	0	-
4.4(to a depth of minimum 25 mm, so that so that)	-	0	-
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0	-
4.4(The number of stitches/dm shall be 14 ± 2.)	-	0	-
4.4(Seam)	-	0	-
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.5(Lamination )	-	1000	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	250	-
4.7(Valve for Filling of Sacks)	-	250	-
4.7(There shall be a double fold at the top seam and)	-	0	-
4.7(and then stitching shall be done through six layers.)	-	0	-
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	0	-
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	0	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	500	-
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	0	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	3000	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	0	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	1500	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	0	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	0	-
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	1500	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	1500	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	0	-
5/5.6 (UV Resistance, )	-	0	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	10600	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	0	-
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	0	-
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	0	-
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	0	-
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	0	-
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	0	-
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	0	-
4.1(Raw Material )	-	0	-
4.2 (Fabric)	-	0	-
4.2 (Linear Density, 900 denier)	-	0	-
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	0	-
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	0	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	0	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
4.3(Sacks)	-	0	-
4.4(Seam )	-	0	-
4.4(Seam )	-	0	-
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	0	-
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0	-
4.4(Seam The stitching shall be done with double fold over seam to)	-	0	-
4.4(to a depth of minimum 25 mm, so that so that)	-	0	-
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0	-
4.4(The number of stitches/dm shall be 14 ± 2.)	-	0	-
4.4(Seam)	-	0	-
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	0	-
4.7(Valve for Filling of Sacks)	-	0	-
4.7(There shall be a double fold at the top seam and)	-	0	-
4.7(and then stitching shall be done through six layers.)	-	0	-
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	0	-
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	0	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	0	-
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	0	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	0	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	0	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	0	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	0	-
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	0	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	0	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	0	-
5/5.6 (UV Resistance, )	-	0	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	0	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	0	-
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	0	-
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	0	-
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	0	-
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	0	-
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	0	-
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	0	-
4.1(Raw Material )	-	0	-
4.2 (Fabric)	-	0	-
4.2 (Linear Density, 900 denier)	-	0	-
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	0	-
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	0	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	0	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
4.3(Sacks)	-	0	-
4.4(Seam )	-	0	-
4.4(Seam )	-	0	-
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	0	-
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0	-
4.4(Seam The stitching shall be done with double fold over seam to)	-	0	-
4.4(to a depth of minimum 25 mm, so that so that)	-	0	-
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0	-
4.4(The number of stitches/dm shall be 14 ± 2.)	-	0	-
4.4(Seam)	-	0	-
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	0	-
4.7(Valve for Filling of Sacks)	-	0	-
4.7(There shall be a double fold at the top seam and)	-	0	-
4.7(and then stitching shall be done through six layers.)	-	0	-
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	0	-
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	0	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	0	-
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	0	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	0	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	0	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	0	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	0	-
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	0	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	0	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	0	-
5/5.6 (UV Resistance, )	-	0	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	0	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	0	-
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	0	-
Cl-5 Fig. 1- Table 1- Sr. no. ii(Ends per dm - Annex B 40 ± 2)	-	0	-
Cl-5 Fig. 1- Table 1-Sr. no. iii(Picks per dm-Annex B 40 ± 2)	-	0	-
Cl-5, Fig. 1- Table 1- Sr. no. i(Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm)	-	0	-
Cl-5, Fig. 1- Table 1- Sr. no. i(Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm)	-	0	-
Cl-5, Fig. 1- Table 1-Sr. no. i(Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm)	-	0	-
Cl-5, Fig. 1, Table 1(i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm)	-	0	-
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	0	-
4.1(Raw Material )	-	0	-
4.2 (Fabric)	-	0	-
4.2 (Linear Density, 900 denier)	-	0	-
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	0	-
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	0	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	0	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
4.3(Sacks)	-	0	-
4.4(Seam )	-	0	-
4.4(Seam )	-	0	-
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	0	-
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0	-
4.4(Seam The stitching shall be done with double fold over seam to)	-	0	-
4.4(to a depth of minimum 25 mm, so that so that)	-	0	-
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0	-
4.4(The number of stitches/dm shall be 14 ± 2.)	-	0	-
4.4(Seam)	-	0	-
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.4(Seam)	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.5(Lamination )	-	0	-
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	0	-
4.7(Valve for Filling of Sacks)	-	0	-
4.7(There shall be a double fold at the top seam and)	-	0	-
4.7(and then stitching shall be done through six layers.)	-	0	-
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	0	-
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	0	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	0	-
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	0	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	0	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	0	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	0	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	0	-
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	0	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	0	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	0	-
5/5.6 (UV Resistance, )	-	0	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	0	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	0	-

-
included w.e.f 16.03.2026

460

LPG Equipment Research Centre (LERC), Bengaluru

6141034

IS 713 (1981)

Specification for zinc base alloy ingots for die casting (Second Revision)

2700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.1("chemical composition")	-	100	-
Clause 4.2(Chemical composition)	-	100	-
Clause 5("Freedom from defects")	-	100	-
Clause 6("CHARACTERISTIC OF INGOTS")	-	100	-
Clause 10(Marking)	-	100	-
Clause 4.1 Table 1(Aluminium)	-	200	-
Clause 4.1 Table 1(Copper)	-	200	-
Clause 4.1 Table 1(Magnesium)	-	200	-
Clause 4.1 Table 1(Copper, Max)	-	200	-
Clause 4.1 Table 1(Lead, Max)	-	200	-
Clause 4.1 Table 1(Cadmium, Max)	-	200	-
Clause 4.1 Table 1(Tin, Max)	-	200	-
Clause 4.1 Table 1(Nickel, Max)	-	200	-
Clause 4.1 Table 1(Thallium and Indium, Max)	-	200	-
Clause 4.1 Table 1(Zinc)	-	200	-
Clause 4.1 Table 1(Iron, Max)	-	200	-

-
1. Clause 2 (Supply of material) Supply of material Applicable to manufacturer 2. Clause 3.1 (Manufacture) Manufacture Applicable to manufacturer.

461

QUALITY INTERNATIONAL RESEARCH & LABORATORIES PRIVATE LIMITED

5197006

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

All Grade / Type / Size / Designation

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9.4(Load In Other Direction From Bend)	-	500	-
Cl 9.3(Load In One Direction)	-	500	-
Cl 7.2(Weight)	-	500	-
Cl 6.1(Length, Width & Thickness)	-	500	-
Cl 5(Deformations and Surface Characteristics)	-	500	-
Cl 9.4(Load In Other Direction From Bend)	-	500	-
Cl 9.3(Load In One Direction)	-	500	-
Cl 7.2(Weight)	-	500	-
Cl 6.1(Length, Width & Thickness)	-	500	-
Cl 5(Deformations and Surface Characteristics)	-	500	-
Cl 9.4(Load In Other Direction From Bend)	-	500	-
Cl 9.3(Load In One Direction)	-	500	-
Cl 8.1(UTM)	-	1000	-
Cl 7.2(Weight)	-	500	-
Cl 6.1(Length, Width & Thickness)	-	500	-
Cl 5(Deformations and Surface Characteristics)	-	500	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON +EQUIVELENT )	-	500	-
4.1(Sulphur and phosphorous)	-	500	-
4.1(CE)	-	500	-
4.1( Nitrogen%)	-	500	-
4.1(Ni)	-	500	-
4.1(Mo)	-	500	-
4.1(Cr)	-	500	-
4.1( Ti)	-	500	-
4.1(V)	-	500	-
4.1( Nb)	-	500	-
4.1( Aluminium %)	-	500	-
4.1( Copper %)	-	500	-
4.1(Silicon %)	-	500	-
4.1(Sulphur %)	-	500	-
4.1(Phosphorus %)	-	500	-
4.1(Manganese %)	-	500	-
4.1(Carbon %)	-	500	-
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	500	-
Cl. 9.3, Table 4(Bend Test )	-	500	-
Cl. 8.1 Table 3(Elongation, percentage)	-	500	-
Cl. 8.1 Table 3(TS/YS ratio)	-	500	-
Cl. 8.1 Table 3(Tensile Strength (TS))	-	500	-
Cl. 8.1 Table 3(Yield Stress (YS))	-	500	-
Cl. 7.2 Table -2 (Nominal Mass)	-	500	-
Cl. 6.1(Nominal Size)	-	500	-
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-	500	-
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-	500	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR+PHOSPHUR)	-	500	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 MANGANESE)	-	500	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 NITROGEN)	-	500	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 PHOSPHURS)	-	500	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR)	-	500	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON )	-	500	-
Cl.4.2 of IS 1786 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl.4.2 of IS 1786 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl.4.2 of IS 1786 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl.4.2 of IS 1786 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl.4.2 of IS 1786 (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl.4.2 of IS 1786 (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl.4.2 of IS 1786 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl.4.2 of IS 1786 (Grade:- Fe 415D,Fe 415S, Fe 500D,Fe 500S,Fe 550D)(Carbon Equivalent)	-	500	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur & Phosphorous)	-	500	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Phosphorous- IS 228)	-	500	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur-IS 228)	-	500	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Carbon-IS 228)	-	500	-
8.18.1 Table 3(Total elongation at maximum force)	-	500	-
Cl 5(Deformations and Surface Characteristics)	-	500	-
5.7(PullOut (Bond Test))	-	10000	20000 upto 20mm 25000 above 20mm
4.2(Niobium (Nb))	-	500	-
4.2(Boron (B))	-	500	-
Cl. 5.7(Average compressive strength of cubes at 28 days)	-	500	-
Cl. 5.7(Bond Strength at 0.25 mm slip)	-	10000	-
Cl. 5.7(Date of testing of concrete cubes)	-	1000	-
Cl. 5.7(Date of casting of concrete cubes)	-	1000	-
Cl. 8.1 Table 3(TS/YS Ratio)	-	500	-
Cl. 5.3 (b)(The ribs contributing the projected area - Transverse Ribs)	-	500	-
Cl. 5.3 (a)(The ribs contributing the projected area - Longitudinal Ribs)	-	500	-
Cl. 8.1 Table 3(Maximum Extension)	-	500	-
Cl. 8.1 Table 3(Total Elongation at Maximum Force)	-	500	-
Cl. 6.2, 6.3 Table 1(Gross Cross Sectional Area, A)	-	500	-
Cl. 4.3(Visual Inspection.)	-	500	-
Cl. 5.2(Surface Characteristics)	-	500	-
Clause 9.4(Rebend Test)	-	500	-
Clause 6.3(Effective Cross-sectional Area)	-	500	-
Clause 8.1(Table 3)(Total Elongation at Maximum Force)	-	500	-
Cl 9.4(Load In Other Direction From Bend)	-	500	-
Cl 9.3(Load In One Direction)	-	500	-
Cl 8.1(UTM)	-	1000	-
Cl 7.2(Weight)	-	500	-
Cl 6.1(Length, Width & Thickness)	-	500	-
Cl 5(Deformations and Surface Characteristics)	-	500	-
Cl 5(Deformations and Surface Characteristics)	-	500	-
Cl 6.1(Length, Width & Thickness)	-	500	-
Cl 7.2(Weight)	-	500	-
Cl 8.1(UTM)	-	1000	-
Cl 9.3(Load In One Direction)	-	500	-
Cl 9.4(Load In Other Direction From Bend)	-	500	-
13(Identification and marking)	-	500	-
5.7(Pull-out test - IS:2770(P1))	-	10000	-
7.0 & 7.1(Specified lengths - SOP MT-23)	-	500	-
8.0 & 8.1("Total elongation at maximum force on 5.65 vSo mm GL. ")	-	500	-
4.3(Rolling and cold working of bars/wire)	-	500	-
7.1(Specified length)	-	500	-
9.1(Preparation of test sample)	-	500	-
9.2(Tensile test,IS:1608(Pt1)-2018)	-	1000	-
9.5(Retest)	-	1000	-
12(Inspection)	-	500	-
Clause 4.2 Note 2, Amendment 1 & 3(Nb+V+B+Ti)	-	500	-
Clause 4.2 Note 3, Amendment 1 & 3(Cr+Cu+Ni+Mo+P)	-	500	-
Clause 4.2, Amendment 3 Note 4("In order to ascertain whether sufficient quantities of nitrogen binding elements are present, following formula may be used, where all elements are in ppm. (N−120)< (Al free/10)+((Ti+V)/7)+(Nb/14)")	-	500	-
1()	-	500	-

-
Included w.e.f 16.03.2026

462

JBS TESTING SOLUTIONS (Unit-2) (24), Jalandhar

9172306

IS 16542 (2016)

Direct insertion type storage water tank for all glass evacuated tubes solar collector - Specification

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.3(Ideal Heating Test)	-	5000	-
8.2(Leakage Test)	-	5000	-
8.4(Integral Test)	-	5000	-
8.5(Performance Test)	-	5000	-
7.6(Thermal Shock Test for Inner Sealing)	-	5000	-
7.7(Thermal Shock Test for outer Sealing)	-	5000	-
6(GENERAL REQUIREMENTS)	-	5000	-
8.1(Measurement of Storage Water Tank Capacity)	-	5000	-

22 May, 2026

-
included w.e.f 16.03.2026

463

CIPET, KOCHI

6137634

IS 14887 (2014)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

25968 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Tapes – Width and Thickness ( IS 6192/IS 11197))	-	187.5	25% Discount on test charges
3.2(Tapes – Linear Density (IS 6192/IS 11197))	-	375	25% Discount on test charges
3.2(Tapes – Tenacity (IS 6192/IS 11197))	-	975	25% Discount on test charges
3.2(Tapes – Elongation at point of rupture (IS 6192/IS 11197))	-	0	Included in test charge for tenacity
3.2(Tapes – Heat Shrinkage (HDPE) (Cl. 3.2 and IS 6192))	-	525	25% Discount on test charges
3.2(Tapes – Colour Fastness for pigmented tapes (IS 6192/IS 11197))	-	637.5	25% Discount on test charges
3.2(Tapes – Dimensional stability (PP) (IS 11197))	-	525	25% Discount on test charges
3.2(Unlaminated Fabric Mass )	-	225	25% Discount on test charges
3.3.1(Bottom seam (IS 10789))	-	187.5	25% Discount on test charges
4.1 and 3.4(Mass of bale (Cl. 4.1), Capacity (Cl 3.4))	-	187.5	25% Discount on test charges
4.2 and Table 1 ii(Dimensions )	-	375	25% Discount on test charges
5.2 and Table 1 iii(Ends per dm )	-	187.5	25% Discount on test charges
5.2 and Table 1 iv(Picks per dm )	-	187.5	25% Discount on test charges
4.2 and Table 1 v(Mass of sack )	-	375	25% Discount on test charges
4.2 and Table 1 vi(Average breaking strength of fabric )	-	975	25% Discount on test charges
4.2 and Table 1 vi(Breaking strength of bottom seam )	-	975	25% Discount on test charges
4.2 and Table 1 viii(Elongation at break of fabric )	-	975	25% Discount on test charges
4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	12130	Specimen condition charges and test charges for breaking strength both directions included
4.2 and Table 1 x(Ash content )	-	900	25% Discount on test charges
3.2(Tapes – Linear Density (IS 6192/IS 11197))	-	0	Repetition of test
3.2(Tapes – Tenacity (IS 6192/IS 11197))	-	0	Repetition of test
3.2(Tapes – Elongation at point of rupture (IS 6192/IS 11197))	-	0	Repetition of test
3.2(Tapes – Heat Shrinkage (HDPE) (Cl. 3.2 and IS 6192))	-	0	Repetition of test
3.2(Tapes – Colour Fastness for pigmented tapes (IS 6192/IS 11197))	-	0	Repetition of test
3.2(Tapes – Dimensional stability (PP) (IS 11197))	-	0	Repetition of test
3.2(Unlaminated Fabric Mass )	-	0	Repetition of test
3.3.1(Bottom seam (IS 10789))	-	0	Repetition of test0
4.1 and 3.4(Mass of bale (Cl. 4.1), Capacity (Cl 3.4))	-	0	Repetition of test
4.2 and Table 1 ii(Dimensions )	-	0	Repetition of test
5.2 and Table 1 iii(Ends per dm )	-	0	Repetition of test
5.2 and Table 1 iv(Picks per dm )	-	0	Repetition of test
4.2 and Table 1 v(Mass of sack )	-	0	Repetition of test
4.2 and Table 1 vi(Average breaking strength of fabric )	-	0	Repetition of test
4.2 and Table 1 vi(Breaking strength of bottom seam )	-	0	Repetition of test
4.2 and Table 1 viii(Elongation at break of fabric )	-	0	Repetition of test
4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	0	Repetition of test
4.2 and Table 1 x(Ash content )	-	0	Repetition of test
3.1(Material Identification)	-	1500	25% discount on test charges
3.1(Overall Migration)	-	1275	25% discount on test charges
3.2(Density)	-	525	25% discount on test charges
Cl 3.2 (Mesh size)(Mesh size)	-	375	25% discount on test charges
Cl 3.2 (Weight in g/m2) (Amendment 3)(Weight in g/m2)	-	375	25% discount on test charges
3.3.2(Mouth)	-	0	Repetition of test
3.2(MFI)	-	825	25% discount on test charges
3.2(Tapes – Width and Thickness ( IS 6192/IS 11197))	-	0	Repetition of test

31 Dec, 2026

-
Included w.e.f 24.03.2026

464

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 17569 (2021)

Insulated Containers for Food Storage — Specification

UP To 20000 ml.

31000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Manufacture and Workmanship)	-	31000	-
5.3(Manufacture and Workmanship)	-	31000	-
7.1(Material)	-	31000	-
7.1.2(Thickness)	-	31000	-
7.1.2.1(Requirements and Tests(Material) – Outer Protective Case and Accessories – Lead)	-	31000	-
7.1.2.1(Requirements and Tests(Material) – Outer Protective Case and Accessories – Cadmium)	-	31000	-
7.1.2.8(Bisphenol A(BPA))	-	0	-
7.3(Capacity)	-	31000	-
7.4(Heat Retention Capability)	-	31000	-
7.5(Cold Retention Capability)	-	31000	-
7.6.1(Drop Impact Test)	-	31000	-
7.6.2(Pendulum Impact Test)	-	31000	-
7.7(Fixing Strength of the Handle)	-	31000	-
7.8(Test for Strength of Shoulder Strap)	-	31000	-
7.9(Leakage Test)	-	31000	-
7.10(Joint Leak Test)	-	31000	-
7.11(Staining Test)	-	31000	-
7.12("Check for PUF (Polyurethane Foam) or any Other Similar Thermal Insulation Material ")	-	31000	-
7.13.1(Length of the Shoulder Strap)	-	31000	-
7.13.2(Stability of Insulated Container)	-	31000	-
7.13.3(Cleaning)	-	31000	-
7.14(Seepage Test)	-	31000	-
9.1(Marking)	-	31000	-
9.2(BIS certification marking)	-	31000	-
10(Packaging)	-	31000	-
CLAUSE 5.2(Welding Defects)	-	31000	-
CLAUSE 7.1(Materials)	-	31000	-
CLAUSE 7.1.2.2(Thickness of plastic)	-	31000	-
"CLAUSE 7.1.2.1 "(Minimum Thickness of Outer Container)	-	31000	-
"CLAUSE 7.1.2.1 "(Coating Thickness)	-	31000	-
"CLAUSE 7.1.2.1 "(Salt Water Corrosion Test)	-	31000	-
CLAUSE 7.1.2.1(Adhesion Test)	-	31000	-
CLAUSE 7.1.2.1(Lead Limit)	-	31000	-
CLAUSE 7.1.2.1(Cadmium Limit)	-	31000	-
CLAUSE 7.1.2.3(Outer container or lid - thickness)	-	31000	-
CLAUSE 7.3(Capacity)	-	31000	-
CLAUSE 7.4(Heat Retention Capability)	-	31000	-
CLAUSE 7.5(Cold Retention Capability)	-	31000	-
CLAUSE 7.6.1(Drop Impact)	-	31000	-
CLAUSE 7.6.2(Pendulum Impact)	-	31000	-
CLAUSE 7.7(Fixing Strength of Handle)	-	31000	-
CLAUSE 7.8(Test for Strength of Shoulder Strap)	-	31000	-
CLAUSE 7.9(Leakage Test)	-	31000	-
CLAUSE 7.10(Joint Leak Test)	-	31000	-
CLAUSE 7.11(Staining Test)	-	31000	-
CLAUSE 7.12(Checking of PUF insulation)	-	31000	-
CLAUSE 7.13.1(Length of the Shoulder Strap)	-	31000	-
CLAUSE 7.13.2(Stability of Flask)	-	31000	-
CLAUSE 7.1.1(Material - inner container)	-	31000	-
C 7.1.1 Note Annex C(Test for leaching of food grade stainless steel)	-	31000	-
CL 7.1.1 Note- Annex D(Sensational test method)	-	31000	-
Cl 7.1.2.2(Polymer - test for BPA)	-	0	-
Cl 7.1.2.4(Silicon gasket - overall migration)	-	31000	-
Cl 7.1.2.4(Silicon gasket - defects)	-	31000	-
Cl 7.1.2.5(Performance requirement for glass lid - Fragmentation test (Cl 8.15.1 of IS 2347))	-	31000	-
Cl 7.1.2.5(Performance requirement for glass lid - Ball drop test (Cl 8.15.2 of IS 2347))	-	31000	-
Cl 7.1.2.5(Performance requirement for glass lid - Thermal shock test (Cl 8.15.3 of IS 2347))	-	31000	-
Cl 7.1.2.5(Performance requirement for glass lid - Free fall test (Cl 8.15.4 of IS 2347))	-	31000	-
Cl 7.1.2.5(Thickness of steel rim)	-	31000	-
Cl 7.1.2.5(Thickness of glass lid)	-	31000	-
Cl 7.1.2.6(Thermal insulating material)	-	31000	-
Cl 7.1.2.7(Additional lid)	-	31000	-
Cl 7.1.2.8(Hot/Cold Box - thickness)	-	31000	-
Cl 7.1.2.9(Internal utensils- material)	-	31000	-
Cl 7.1.2.9(Internal utensils- thickness)	-	31000	-
Cl 7.1.2.9(Internal utensils - thickness of plastic lid)	-	31000	-
Cl 7.1.2.9(Test for BPA)	-	0	-
CLAUSE 7.1.2.3(Outer container or lid - material)	-	31000	-

-
Included w.e.f 24.03.2026 For flasks other than plastic (polymer based)

465

LPG Equipment Research Centre (LERC), Bengaluru

6141034

IS 18616 (2024)

PIEZOELECTRIC SPARK LIGHTER FOR GAS BURNING APPLIANCES SPECIFICATION

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(Material)	-	15000	-
Cl-5(Spring)	-	15000	-
Cl-6(Workmanship and finish)	-	15000	-
Cl-7.1, 7.2.2, Table-1(Diameter mm)	-	15000	-
Cl-7.1, 7.2.2, Table-1(Length mm)	-	15000	-
Cl-7.1, 7.2.2, Table-1(Capacitance Min pF)	-	15000	-
Cl-7.1, 7.2.2, Table-1(Capacitance Min pF)	-	15000	-
Cl-7.2.1(Visual Examination)	-	15000	-
Cl-7.2.2(Dimensions)	-	15000	-
Cl-7.2.3(Durability)	-	15000	-
Cl-7.2.4(Electrostatic Capacity (Capacitance))	-	15000	-
Cl-7.2.5(Output Voltage)	-	15000	-
Cl-7.2.6(Insulation)	-	15000	-
Cl-7.2.7(Insulation Resistance)	-	15000	-
Cl-7.2.8(Heat Resistance)	-	15000	-
Cl-7.2.9(Humidity Characteristics)	-	15000	-
Cl-7.2.10(Moisture Proof Characteristics)	-	15000	-
Cl-7.3(Criteria of Acceptance)	-	15000	-
Cl-8.1(Spark Generation)	-	15000	-
Cl-8.2(Resistance to Dropping)	-	15000	-
Cl-8.2.1(Drop Test)	-	15000	-
Cl-8.3(Resistance to Elevated Temperature)	-	15000	-
Cl-8.4(Humidity Resistance)	-	15000	-
Cl-8.6(Endurance Test)	-	15000	-

-
included w.e.f 17.03.2026

466

Akshat Test Lab & Calibration Services, Ghaziabad

8186526

IS 302 : Part 2 : Sec 206 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 206 electric coffee makers

Electric coffee makers

22600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
32(Radiation hazards)	-	1000	-
31(Resistance to Rusting)	-	1000	-
30(Resistance to Heat, Fire and Tracking)	-	1500	-
29(Clearances, Creepage Distances & Solid Insulation)	-	1050	-
28(Screws & Connection)	-	1000	-
27(Provision For Earthing)	-	1500	-
26(Terminals For External Conductors)	-	1000	-
25(Supply Connection & External Flexible Cables and Cords)	-	1500	-
24(Component)	-	2000	Exclusion: (Capacitors for radio interference suppression, isolating transformer, Switches, Automatic control, coupler) (Cl.24.1.1, 24.1.2, 24.1.3, 24.1.4, 24.1.5)
23(Internal wiring)	-	1000	-
22(Construction)	-	2000	Exclusion: (IP test for IPX9, Automatic cord reel, Oxygen bomb, Software evaluation, water pressure) (Cl. 22.1, 22.16, 22.32, 22.46, 22.47)
21(Mechanical strength)	-	1000	-
20(Stability & Mechanical Hazards)	-	1000	-
19(Abnormal Operation)	-	1500	-
18(Endurance)	-	4000	-
17(Overload Protection)	-	1000	-
16(Insulation resistance and Electric Strength (After humidity treatment))	-	1500	-
15(Moisture Resistance)	-	1500	Exclusion: (IP test for IPX9 Cl. 15.1)
14(Radio and television interference suppression/ Transient Overvoltages)	-	1500	-
13(Electrical insulation and Leakage Current at Operating Temperature)	-	1500	-
12(Operation under overload conditions of appliances with heating elements)	-	1000	-
11(Temperature Rise/Heating)	-	1500	-
10(Input)	-	1500	-
9(Starting Of Motor Operated Appliances)	-	1000	-
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	1500	-
7(Marking/ Marking & Instructions)	-	1000	-
6(Classification)	-	100	-
5(Rating)	-	100	For BIS Type test 22000/- only. For others type test 35000/- only.
32(Radiation hazards)	-	0	-
31(Resistance to Rusting)	-	0	-
30(Resistance to Heat, Fire and Tracking)	-	0	-
29(Clearances, Creepage Distances & Solid Insulation)	-	0	-
28(Screws & Connection)	-	0	-
27(Provision For Earthing)	-	0	-
26(Terminals For External Conductors)	-	0	-
25(Supply Connection & External Flexible Cables and Cords)	-	0	-
24(Component)	-	0	-
23(Internal wiring)	-	0	-
22(Construction)	-	0	-
21(Mechanical strength)	-	0	-
20(Stability & Mechanical Hazards)	-	0	-
19(Abnormal Operation)	-	0	-
18(Endurance)	-	0	-
17(Overload Protection)	-	0	-
16(Insulation resistance and Electric Strength (After humidity treatment))	-	0	-
15(Moisture Resistance)	-	0	-
14(Radio and television interference suppression/ Transient Overvoltages)	-	0	-
13(Electrical insulation and Leakage Current at Operating Temperature)	-	0	-
12(Operation under overload conditions of appliances with heating elements)	-	0	-
11(Temperature Rise/Heating)	-	0	-
10(Input)	-	0	-
9(Starting Of Motor Operated Appliances)	-	0	-
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	0	-
7(Marking/ Marking & Instructions)	-	0	-
6(Classification)	-	0	-
5(Rating)	-	0	-

-
Included w.e.f 24.03.2026 Exclusion: Cl 19.11.4.1-19.11.4.7(EMI/EMC)

467

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 5504 (2025)

Spiral Welded Pipes - Specification (Second Revision)

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 6.1, S.No. i)(Carbon)	-	14000		for HST, additional testing charges

-
-

468

EKO PRO ENGINEERS PRIVATE LIMITED (32/41), GHAZIABAD

9179706

IS 15298 : Part 3 (2024)

Personal Protective Equipment Part 3 Protective Footwear (ISO 20346 : 2021, MOD) (Third Revision)

ALL

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.2(Design)	-	50000	-
Cl 5.2.2(" Height of upper ")	-	50000	-
Cl 5.2.3(Heel area)	-	50000	-
Cl 5.3.1.1(Construction of whole footwear)	-	50000	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	50000	-
Cl 5.3.2.1(Toe protection - general)	-	50000	-
Cl 5.3.2.2(Internal length)	-	50000	-
Cl 5.3.2.3(Width of toecap flange)	-	50000	-
Cl 5.3.2.4.1(Corrosion resistance of Class I footwear and hybrid mounted footwear)	-	50000	-
Cl 5.3.2.4.2(Corrosion resistance of Class II and hybrid moulded footwear)	-	50000	-
Cl 5.3.2.5(Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-	600	-
Cl 5.3.2.6(Impact resistance)	-	50000	-
Cl 5.3.2.7(Compression resistance)	-	50000	-
Cl 5.3.3(Leak proofness)	-	50000	-
Cl 5.3.4("Specific ergonomic features ")	-	50000	-
Cl 5.3.5.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	50000	-
Cl 5.3.6, Table no 1 of IS 17011 (i)(Allergenic and carcinogenic disperse dyes)	-	50000	-
Cl 5.3.6, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	50000	-
Cl 5.3.6, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	50000	-
Cl 5.3.6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	50000	-
Cl 5.3.6, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	50000	-
Cl 5.3.6, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	50000	-
Cl 5.3.6, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	50000	-
Cl 5.3.6, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	50000	-
Cl 5.3.6, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	50000	-
Cl 5.3.6, Table no 1 of IS 17011 (x)(pH)	-	50000	-
Cl 5.3.6, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	50000	-
Cl 5.3.6, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	50000	-
Cl 5.3.7(Seam strength)	-	50000	-
Cl 5.3.8(Lead Content ( National Annex A))	-	50000	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	50000	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	50000	-
Cl 5.4.2(Thickness)	-	50000	-
Cl 5.4.3(Tear strength)	-	50000	-
Cl 5.4.4, Table 11(Tensile properties- Breaking Force)	-	50000	-
Cl 5.4.4, Table 11(Tensile properties-Modulus at 100 % elongation)	-	50000	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	50000	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	50000	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	50000	-
Cl 5.4.7(Resistance to hydrolysis)	-	50000	-
Cl 5.5.2(Lining- Tear strength)	-	50000	-
Cl 5.5.3(Lining- Abrasion resistance)	-	50000	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	50000	-
Cl 5.6.2(Tear strength of tongue)	-	50000	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	50000	-
Cl 5.7.2(Water permeability of insock)	-	50000	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	50000	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	50000	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	50000	-
Cl 5.8.2.1(Thickness of Outsole)	-	50000	-
Cl 5.8.2.2(Cleated area)	-	50000	-
Cl 5.8.3(Outsole- Tear strength)	-	50000	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	50000	-
Cl 5.8.5(Outsole-Flexing resistance)	-	50000	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	50000	-
Cl 5.8.7(Interlayer bond strength)	-	50000	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	50000	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	50000	-
Cl 6.2.1.1.4(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	50000	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	50000	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	50000	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	50000	-
Cl 6.2.1.4.2.1(Corrosion resistance of perforation resistant metallic insert for Class I footwear and hybrid mounted footwear)	-	50000	-
Cl 6.2.1.4.2.2(Corrosion resistance of perforation resistant metallic insert for Class II footwear and hybrid moulded footwear)	-	50000	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	50000	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	50000	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	50000	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	50000	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	50000	-
Cl 6.2.4(Energy absorption of seat region)	-	50000	-
Cl 6.2.5(Water resistance)	-	50000	-
Cl 6.2.6.1(Metatarsal protection - Construction)	-	50000	-
Cl 6.2.6.2("Metatarsal protection-Impact resistance of metatarsal protective device ")	-	50000	-
Cl 6.2.7(Ankle protection)	-	0	-
Cl 6.2.8.2(Cut resistance footwear- design)	-	50000	-
Cl 6.2.8.2(Dimensions and construction of protective area of Cut resistance footwear)	-	50000	-
Cl 6.2.8.3(Resistance to cutting)	-	50000	-
Cl 6.2.9(Scuff cap)	-	50000	-
Cl 6.2.10("Slip resistance on ceramic tile floor with glycerine ")	-	50000	-
Cl 6.3(Upper — Water penetration and absorption)	-	50000	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	50000	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	50000	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	50000	-
Cl 6.4.3.2(Design of Ladder grip)	-	50000	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	50000	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	50000	-
Cl 7("Marking ")	-	50000	-
Cl 7("Marking ")	-	50000	-
Cl 5.4.5(Flexing resistance)	-	50000	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	50000	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	50000	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	50000	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	50000	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	50000	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	50000	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	50000	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	50000	-
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	50000	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	50000	-
Cl 5.4.4, Table 11(Tensile properties- Tensile strength)	-	50000	-
Cl 5.8.2.3(Cleat height)	-	50000	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	50000	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	50000	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	50000	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	50000	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	50000	-
Cl. No.8.6.1,Table 1 of IS 17011(Formaldehyde (free or released by partial hydrolysis))	-	50000	-
Cl. No.8.6.1,Table 1 of IS 17011(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	50000	-
Cl.8 - Table No 1(Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988)	-	50000	-
Cl.4.1 (Table B-3)(Allergenic and Carcinogenic Disperse Dyes)	-	50000	-
Cl.4.1 (Table B-1 Sl I)(Aromatic Amines: 4-aminobiphenyl)	-	50000	-
Cl.4.1 (Table B-1 Sl II)(Aromatic Amines: Benzidine)	-	50000	-
Cl.4.1 (Table B-1 Sl III)(Aromatic Amines: 4-chloro-o-toluidine)	-	50000	-
Cl.4.1 (Table B-1 Sl IV)(Aromatic Amines: 2-naphthylamine)	-	50000	-
Cl.4.1 (Table B-1 Sl V)(Aromatic Amines :o-aminoazotoluene)	-	50000	-
Cl.4.1 (Table B-1 Sl VI)(Aromatic Amines: 2-amino-4-nitrotoluenem)	-	50000	-
Cl.4.1 (Table B-1 Sl VII)(Aromatic Amines: p-chloroaniline)	-	50000	-
Cl.4.1 (Table B-1 Sl VIII)(Aromatic Amines: 2,4-diaminoanisole)	-	50000	-
Cl.4.1 (Table B-1 Sl IX)(Aromatic Amines : 4,4’- diaminodiphenylmethane:)	-	50000	-
Cl.4.1 (Table B-1 Sl X)(Aromatic Amines : 3,3’-dichlorobenzidine)	-	50000	-
Cl.4.1 (Table B-1 Sl XI)(Aromatic Amines : 3,3’-dimethoxybenzidine)	-	50000	-
Cl.4.1 (Table B-1 Sl XII)(Aromatic Amines : 3,3’-dimethylbenzidine)	-	50000	-
Cl.4.1 (Table B-1 Sl XIII)(Aromatic Amines: 3,3’-dimethyl-4,4’-diaminodiphenylmethane)	-	50000	-
Cl.4.1 (Table B-1 Sl XV)(Aromatic Amines : 4,4’-methylene-bis(2-chloroaniline):)	-	50000	-
Cl.4.1 (Table B-1 Sl XVI)(Aromatic Amines :4,4’-oxydianiline)	-	50000	-
Cl.4.1 (Table B-1 Sl XVII)(Aromatic Amines:4,4’-thiodianiline)	-	50000	-
Cl.4.1 (Table B-1 Sl XVIII)(Aromatic Amines :o-toluidine:)	-	50000	-
Cl.4.1 (Table B-1 Sl XIX)(Aromatic Amines: 2,4-toluylendiamine)	-	50000	-
Cl.4.1 (Table B-1 Sl XX)(Aromatic Amines: 2,4,5-trimethylaniline)	-	50000	-
Cl.4.1 (Table B-1 Sl XXI)(Aromatic Amines :2,4-dimethylaniline)	-	50000	-
Cl.4.1 (Table B-1 Sl XXII)(Aromatic Amines: 2,6-dimethylaniline:)	-	50000	-
Cl.4.1 (Table B-1 Sl XXIII)(Aromatic Amines :2-methoxyaniline)	-	50000	-
Cl.4.1 (Table B-1 Sl XXIV)(Aromatic Amines :4-aminoazobenzene)	-	50000	-
Cl.4.1 (Table B-1 Sl XIV)(Aromatic Amines : p-cresidine)	-	50000	-

-
-

469

EKO PRO ENGINEERS PRIVATE LIMITED (32/41), GHAZIABAD

9179706

IS 15298 : part 4 (2024)

Personal Protective Equipment Part 4 Occupational Footwear (ISO 20347 : 2021, MOD) (Third Revision)

ALL

39000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.2(Design)	-	500	-
Cl 5.2.2(" Height of upper ")	-	500	-
Cl 5.2.3(Heel area)	-	500	-
Cl 5.3.1.1(Construction of whole footwear)	-	500	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	500	-
Cl 5.3.2(Leak proofness)	-	500	-
Cl 5.3.3(Specific ergonomic features)	-	500	-
Cl 5.3.4.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	500	-
Cl 5.3.5, Table no 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	500	-
Cl 5.3.5, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	500	-
Cl 5.3.5, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	500	-
Cl 5.3.5, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	500	-
Cl 5.3.5, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	500	-
Cl 5.3.5, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	500	-
Cl 5.3.5, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	500	-
Cl 5.3.5, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	500	-
Cl 6.2.5(Water resistance)	-	800	-
Cl 5.3.5, Table no 1 of IS 17011 (x)(pH)	-	500	-
Cl 5.3.5, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	500	-
Cl 5.3.5, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	500	-
Cl 5.3.6(Seam strength)	-	500	-
Cl 5.3.7(Lead Content ( National Annex A))	-	500	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	500	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	500	-
Cl 5.4.2(Thickness)	-	500	-
Cl 5.4.3(Tear strength)	-	800	-
Cl 5.4.4, Table 9(Tensile properties- Tensile strength)	-	800	-
Cl 5.4.4, Table 9(Tensile properties- Breaking Force)	-	800	-
Cl 5.4.4, Table 9(Tensile properties-Modulus at 100 % elongation)	-	800	-
Cl 5.4.4, Table 9(Tensile properties- Elongation at break)	-	800	-
Cl 5.4.5(Flexing resistance)	-	800	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	800	-
Cl 5.4.7(Resistance to hydrolysis)	-	800	-
Cl 5.5.2(Lining- Tear strength)	-	800	-
Cl 5.5.3(Lining- Abrasion resistance)	-	800	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	800	-
Cl 5.6.2(Tear strength of tongue)	-	800	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	500	-
Cl 5.7.2(Water permeability of insock)	-	800	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	800	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	800	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	800	-
Cl 5.8.2.1(Thickness of Outsole)	-	500	-
Cl 5.8.2.2(Cleated area)	-	500	-
Cl 5.8.2.3(Cleat height)	-	500	-
Cl 5.8.3(Outsole- Tear strength)	-	800	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	800	-
Cl 5.8.5(Outsole-Flexing resistance)	-	800	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	800	-
Cl 5.8.7(Interlayer bond strength)	-	800	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	800	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	800	-
Cl 6.2.1.1.4(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	800	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	800	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	800	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	800	-
Cl 6.2.1.4.2.1(ISO 20344:2021, 5.11.2)	-	800	-
Cl 6.2.1.4.2.2(ISO 20344:2021, 5.6.2.1)	-	800	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	800	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	800	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	800	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	800	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	800	-
Cl 6.2.4(Energy absorption of seat region)	-	800	-
Cl 6.2.6(Ankle protection)	-	0	-
Cl 6.2.7.1(Cut resistance footwear- design)	-	800	-
Cl 6.2.7.2(Dimensions and construction of protective area of Cut resistance footwear)	-	500	-
Cl 6.2.7.3(Resistance to cutting)	-	500	-
Cl 6.2.8(Scuff cap)	-	500	-
Cl 6.2.9("Slip resistance on ceramic tile floor with glycerine ")	-	800	-
Cl 6.3(Upper — Water penetration and absorption)	-	800	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	800	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	800	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	800	-
Cl 6.4.3.2(Design of Ladder grip)	-	800	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	800	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	800	-
Cl 7("Marking ")	-	500	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	800	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	800	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	800	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	800	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	800	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	800	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	800	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	800	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	800	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	800	-
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	800	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	800	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	800	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	800	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	800	-
Cl. No.8.6.1,Table 1 of IS 17011(Chromium)	-	600	-
Cl. No.8.6.1,Table 1 of IS 17011(Formaldehyde (free or released by partial hydrolysis))	-	600	-
Cl. No.8.6.1,Table 1 of IS 17011(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	600	-
Cl.8 - Table No 1(Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988)	-	600	-
Cl.4.1 (Table B-3 Sl I)(Allergenic Disperse Dyes :Disperse blue 3)	-	600	-
Cl.4.1 (Table B-3 Sl II)(Allergenic Disperse Dyes :Disperse blue 7)	-	600	-
Cl.4.1 (Table B-3 Sl III)(Allergenic Disperse Dyes :Disperse blue 26)	-	600	-
Cl.4.1 (Table B-3 Sl IV)(Allergenic Disperse Dyes :Disperse blue 102)	-	600	-
Cl.4.1 (Table B-3 Sl V)(Allergenic Disperse Dyes: Disperse brown 1)	-	600	-
Cl.4.1 (Table B-3 Sl VI)(Allergenic Disperse Dyes :Disperse yellow 1)	-	600	-
Cl.4.1 (Table B-3 Sl VII)(Allergenic Disperse Dyes :Disperse yellow 9)	-	600	-
Cl.4.1 (Table B-3 Sl VIII)(Allergenic Disperse Dyes :Disperse yellow 39)	-	600	-
Cl.4.1 (Table B-3 Sl IX)(Allergenic Disperse Dyes :Disperse yellow 49)	-	600	-
Cl.4.1 (Table B-3 Sl X)(Allergenic Disperse Dyes :Disperse orange 1)	-	600	-
Cl.4.1 (Table B-3 Sl XI)(Allergenic Disperse Dyes :Disperse red 11)	-	600	-
Cl.4.1 (Table B-3 Sl XII)(Allergenic Disperse Dyes :Disperse red 17)	-	600	-
Cl.4.1 (Table B-3 Sl XIII)(Allergenic Disperse Dyes :Disperse yellow 7)	-	600	-
Cl.4.1 (Table B-3 Sl XIV)(Allergenic Disperse Dyes :Disperse yellow 56)	-	600	-
Cl.4.1 (Table B-3 Sl XV)(Allergenic Disperse Dyes :Disperse red 151)	-	600	-
Cl.4.1 (Table B-3 Sl XVI)(Allergenic Disperse Dyes :Solvent red 23)	-	600	-
Cl.4.1 (Table B-4 Sl I)(Carcinogenic Disperse Dyes :Navy blue)	-	600	-
Cl.4.1 (Table B-4 Sl II)(Carcinogenic Disperse Dyes: Disperse blue 1)	-	600	-
Cl.4.1 (Table B-4 Sl III)(Carcinogenic Disperse Dyes: Disperse blue 35)	-	600	-
Cl.4.1 (Table B-4 Sl IV)(Carcinogenic Disperse Dyes :Disperse blue 106)	-	600	-
Cl.4.1 (Table B-4 Sl V)(Carcinogenic Disperse Dyes: Disperse blue 124)	-	600	-
Cl.4.1 (Table B-4 Sl VI)(Carcinogenic Disperse Dyes :Disperse yellow 3)	-	600	-
Cl.4.1 (Table B-4 Sl VII)(Carcinogenic Disperse Dyes: Disperse orange 3)	-	600	-
Cl.4.1 (Table B-4 Sl VIII)(Carcinogenic Disperse Dyes :Disperse orange 37/59/76a))	-	600	-
Cl.4.1 (Table B-4 Sl IX)(Carcinogenic Disperse Dyes :Disperse red 1)	-	600	-
Cl.4.1 (Table B-4 Sl X)(Carcinogenic Disperse Dyes :Basic red 9)	-	600	-
Cl.4.1 (Table B-4 Sl XI)(Carcinogenic Disperse Dyes :Violet 3)	-	600	-
Cl.4.1 (Table B-4 Sl XII)(Carcinogenic Disperse Dyes Disperse :yellow 23)	-	600	-
Cl 5.3.4.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution (ii))	-	800	-

-
-

470

EKO PRO ENGINEERS PRIVATE LIMITED (32/37) GHAZIABAD

8164006

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

ALL

38000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12(Charging of metal-ion batteries)	-	0	Facility not Available
6(Classification- IS 302-1)	-	38000	-
5(General conditions for the tests)	-	38000	-
19.11.4.7(Harmonics)	-	0	Facility not Available
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	Facility not Available
19.11.4.5(Immunity to conducted discharges)	-	0	Facility not Available
19.11.4.4(Surge immunity test)	-	0	Facility not Available
19.11.4.3(Fast transient bursts)	-	0	Facility not Available
19.11.4.2(Radiated fields)	-	0	Facility not Available
19.11.4.1(Electrostatic discharges)	-	0	Facility not Available
11.8(Temperature rise)	-	38000	-
11.7(Duration corresponding)	-	38000	-
11.6(Combined appliances)	-	38000	-
11.5(Motor-operated appliances)	-	38000	-
11.4(Heating appliances)	-	38000	-
8.1.5(Live parts of built-in appliances)	-	38000	-
18(Endurance)	-	38000	-
17(Overload protection of transformers and associated circuits)	-	38000	-
16(Leakage current and electric strength)	-	38000	-
4(General requirement)	-	38000	-
32.1(Radiation Toxicity and Similar Hazards)	-	38000	-
31(Resistance to Rusting)	-	38000	-
30.2(Needle Flame Test)	-	38000	-
30.2(Glow Wire Test)	-	38000	-
30.1(Ball pressure test)	-	38000	-
29(clearance, creepage distances and solid insulation)	-	38000	-
28(Screw test and connections)	-	38000	-
27.1(Provision for Earthing, IS 302-1)	-	38000	-
26(Terminals for external conductors)	-	38000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	38000	-
24(Components)	-	0	-
23.1(Internal Wiring, IS 302-1)	-	38000	-
22.1(Construction, IS 302-1)	-	38000	-
21.1(Mechanical Strength, IS 302-1)	-	38000	-
19(Abnormal Operation)	-	38000	-
18(Endurance)	-	38000	-
17(Over Load Protection of Transformers and associated circuits)	-	38000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	38000	-
16.2(Leakage Current (after Clause 15))	-	38000	-
16.1(General)	-	38000	-
16.0(General)	-	38000	-
15.3(Humidity Test)	-	38000	-
15.2(Spillage Test)	-	38000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	0	IPX 3,IPX4,IPX5,IPX6,IPX7,IPX8,IPX9,IP5X,IP6X TEST Facility not Available, WE have only single phase testing Facility Available.
15.0(Moisture resistance)	-	38000	-
14(Transient Over Voltages)	-	38000	-
13.3(Electric Strength at operating temperature)	-	38000	-
13.2(Leakage current at operating temperature)	-	38000	-
13(Leakage current and electric strength at operating temperature)	-	38000	-
11.3(Heating)	-	38000	-
11.2(General)	-	38000	-
11.1(General)	-	38000	-
10.2(Current input)	-	38000	-
10.1(Power input)	-	38000	-
9(Starting of motor operation test requirements and tests)	-	38000	-
8.1.4(Protection against live parts against protective impedance)	-	38000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	38000	-
8.1.2(Protection against live parts in openings)	-	38000	-
8.1.1(Protection against live parts in all positions)	-	38000	-
7(Marking and instructions)	-	38000	-
A.2(Earth continuity test)	-	38000	-
Annex C(Ageing test on motors)	-	38000	-
Annex D(Thermal motor protectors)	-	38000	-
15.2(Moisture resistance)	-	38000	-
19.17(Abnormal Operation, IS 302-1)	-	38000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	38000	-
21.2(Mechanical Strength, IS 302-1)	-	38000	-
21.3(Mechanical Strength, IS 302-1)	-	38000	-
22.5(Construction)	-	38000	-
22.6(Construction, IS 302-1)	-	38000	-
22.11(Construction, IS 302-1)	-	38000	-
22.16(Construction)	-	38000	-
22.32(Construction, IS 302-1)	-	38000	-
22.42(Construction)	-	38000	-
23.3(Internal Wiring, IS 302-1)	-	38000	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	38000	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	38000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	38000	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	38000	-
26.5(Terminals for external conductors)	-	38000	-
27.5(Provision for Earthing, IS 302-1)	-	38000	-
28.1(Screws and connections)	-	38000	-
22.2(Construction, IS 302-1)	-	38000	-
22.3(Construction, IS 302-1)	-	38000	-
B.22.4(Construction, IS 302-1)	-	38000	-
B.22.5(Construction, IS 302-1)	-	38000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	38000	-

27 May, 2028

-
-

471

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 9962 (1981)

Specification for steel wire for needles

11450 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	4000	For complete chemical tests
5.1(Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	4000	For complete chemical tests
5.1(Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	4000	For complete chemical tests
5.1(Sulphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	4000	For complete chemical tests
5.1(Phosphorus- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	4000	For complete chemical tests
6(Nominal size of wire-IS 9962)	-	1000	For complete dimension and qualitative tests
7.1(Tensile Test - IS 1608(Pt -1))	-	6450	For complete mechanical tests
7.2(Test for Spheroidised -IS 9962)	-	6450	For complete mechanical tests
7.3(Decarburisation-IS 9962)	-	6450	For complete mechanical tests
8(Finish - IS 9962)	-	1000	For complete dimensional and qualitative tests
9(Freedom from defects-IS 9962)	-	1000	For complete dimensional and qualitative tests
Cl. 5.1(Phosphorus)	-	4000	For complete chemical tests
Cl. 5.1(Sulphur)	-	4000	For complete chemical tests
Cl. 5.1(Silicon)	-	4000	For complete chemical tests
Cl. 5.1(Manganese)	-	4000	For complete chemical tests
Cl. 5.1(Carbon)	-	4000	For complete chemical tests

-
included w.e.f 16.03.2026

472

Atckon Laboratories LLP, Bahadurgarh

8186436

IS 18509 (2024)

Cross-recessed Countersunk Head Wood Screws ï¿½ Specification

ALL SIZES

18500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 4.0(Dimenssions.)	-	2500	-
Clause. 4.0(Thread size.)	-	2500	-
Clause. 4.0(Length)	-	2500	-
Clause. 5.0(Material)	-	6000	-
Clause. 5.0(Thread And Screw ends)	-	6000	-
Clause. 5.0(Cross Recess)	-	6000	-
Clause. 5.0(Tolerances)	-	6000	-
Clause. 5.0(Surface Condition)	-	6000	-
Clause. 5.0(Surface Coating)	-	6000	-
Clause. 5.0(Acceptability)	-	6000	-
Clause.6.0(Torque Testing)	-	4000	-
Clause.7.0(Hardness)	-	4000	-
Clause.8.0(Designation)	-	1000	-
Clause.9.0(Marking)	-	1000	-

-
Included w.e.f. 16.03.2026

473

Atckon Laboratories LLP, Bahadurgarh

8186436

IS 18508 (2024)

Chipboard Screws ï¿½ Specification

ALL SIZES

18500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 4.0(Dimenssions.)	-	2000	-
Clause. 4.0(Thread size.)	-	2000	-
Clause. 4.0(Length)	-	2000	-
Clause. 5.0(Material)	-	5000	-
Clause. 5.0(Cross Recess)	-	5000	-
Clause. 5.0(Tolerances)	-	5000	-
Clause. 5.0(Surface Condition)	-	5000	-
Clause. 5.0(Surface Coating)	-	5000	-
Clause.6.0(Acceptability)	-	1000	-
Clause.6.0(Torque Testing)	-	2000	-
CClause.7.0(Hardness)	-	5000	-
Clause.8.0(Designation)	-	1000	-
Clause.9.0(Marking)	-	2500	-

-
Included w.e.f. 16.03.2026

474

Hi Physix Laboratory India Private Limited, Pune

7126926

IS 18689 (2024)

Household and Similar Electrical Appliances - Safety - Particular Requirements for Commercial Refrigerating Appliances and Ice-Makers with an Incorporated or Remote Refrigerant Unit or Motor-Compressor (IEC 60335-2-89 : 2019, MOD)

250000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	5000	-
8(Protection against access to live parts)	-	5000	-
10(Power input and current)	-	15000	-
10.101(Power input and current)	-	0	Testing Charges covered in Cl.10
11(Heating)	-	20000	-
13.1 &13.2(Leakage current test)	-	5000	-
13.1 &13.3(Electric strength test)	-	5000	-
14(Transient overvoltages)	-	10000	-
15(Moisture resistance)	-	15000	-
15.101,15.102,15.103(Moisture resistance)	-	0	Testing Charges covered in Cl.15
16.1 &16.2(Leakage current test)	-	5000	-
16.1 & 16.3(Electric strength test)	-	5000	-
17(Overload protection of transformers and associated circuits)	-	10000	-
19(Abnormal operation)	-	30000	Testing Charges Rs. 30000 /- is for Cl. 19 (Excluding EMI/EMC Tests of Cl.19.11.4.1 to Cl.19.11.4.7). If applicable, the testing charges Rs. 89000/- for EMI/EMC tests will be charged extra for the respective EMI/EMC tests.
19.101(Abnormal operation)	-	0	Testing charges covered in Cl.19
19.102(Abnormal operation)	-	0	Testing charges covered in Cl.19
19.103(Abnormal operation)	-	0	Testing charges covered in Cl.19
20(Stability and mechanical hazards)	-	10000	-
21(Mechanical strength)	-	10000	-
21.101(Mechanical strength)	-	0	Testing charges covered in Cl.21
21.102(Mechanical strength)	-	0	Testing charges covered in Cl.21
21.103(Mechanical strength)	-	0	Testing charges covered in Cl.21
22(Construction)	-	40000	-
23(Internal wiring)	-	5000	-
24(Components)	-	5000	-
25("Supply connection and external flexible cords")	-	5000	-
26("Terminals for external conductors")	-	5000	-
27(Provision for earthing)	-	5000	-
28(Screws and connections)	-	5000	-
29("Clearances, creepage distances and solid insulation")	-	10000	-
30("Resistance to heat and fire ")	-	15000	-
31(Resistance to rusting)	-	5000	-
7(Marking and instructions)	-	0	-
8(Protection against access to live parts)	-	0	-
10(Power input and current)	-	0	-
10.101(Power input and current)	-	0	-
11(Heating)	-	0	-
13.1 &13.2(Leakage current test)	-	0	-
13.1 &13.3(Electric strength test)	-	0	-
14(Transient overvoltages)	-	0	-
15(Moisture resistance)	-	0	-
15.101,15.102,15.103(Moisture resistance)	-	0	-
16.1 &16.2(Leakage current test)	-	0	-
16.1 & 16.3(Electric strength test)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
19(Abnormal operation)	-	0	-
19.101(Abnormal operation)	-	0	-
19.102(Abnormal operation)	-	0	-
19.103(Abnormal operation)	-	0	-
20(Stability and mechanical hazards)	-	0	-
21(Mechanical strength)	-	0	-
21.101(Mechanical strength)	-	0	-
21.102(Mechanical strength)	-	0	-
21.103(Mechanical strength)	-	0	-
22(Construction)	-	0	-
23(Internal wiring)	-	0	-
24(Components)	-	0	-
25("Supply connection and external flexible cords")	-	0	-
26("Terminals for external conductors")	-	0	-
27(Provision for earthing)	-	0	-
28(Screws and connections)	-	0	-
29("Clearances, creepage distances and solid insulation")	-	0	-
30("Resistance to heat and fire ")	-	0	-
31(Resistance to rusting)	-	0	-
7(Marking and instructions)	-	0	-
8(Protection against access to live parts)	-	0	-
10(Power input and current)	-	0	-
10.101(Power input and current)	-	0	-
11(Heating)	-	0	-
13.1 &13.2(Leakage current test)	-	0	-
13.1 &13.3(Electric strength test)	-	0	-
14(Transient overvoltages)	-	0	-
15(Moisture resistance)	-	0	-
15.101,15.102,15.103(Moisture resistance)	-	0	-
16.1 &16.2(Leakage current test)	-	0	-
16.1 & 16.3(Electric strength test)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
19(Abnormal operation)	-	0	-
19.101(Abnormal operation)	-	0	-
19.102(Abnormal operation)	-	0	-
19.103(Abnormal operation)	-	0	-
20(Stability and mechanical hazards)	-	0	-
21(Mechanical strength)	-	0	-
21.101(Mechanical strength)	-	0	-
21.102(Mechanical strength)	-	0	-
21.103(Mechanical strength)	-	0	-
22(Construction)	-	0	-
23(Internal wiring)	-	0	-
24(Components)	-	0	-
25("Supply connection and external flexible cords")	-	0	-
26("Terminals for external conductors")	-	0	-
27(Provision for earthing)	-	0	-
28(Screws and connections)	-	0	-
29("Clearances, creepage distances and solid insulation")	-	0	-
30("Resistance to heat and fire ")	-	0	-
31(Resistance to rusting)	-	0	-
7(Marking and instructions)	-	0	-
8(Protection against access to live parts)	-	0	-
10(Power input and current)	-	0	-
10.101(Power input and current)	-	0	-
11(Heating)	-	0	-
13.1 &13.2(Leakage current test)	-	0	-
13.1 &13.3(Electric strength test)	-	0	-
14(Transient overvoltages)	-	0	-
15(Moisture resistance)	-	0	-
15.101,15.102,15.103(Moisture resistance)	-	0	-
16.1 &16.2(Leakage current test)	-	0	-
16.1 & 16.3(Electric strength test)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
19(Abnormal operation)	-	0	-
19.101(Abnormal operation)	-	0	-
19.102(Abnormal operation)	-	0	-
19.103(Abnormal operation)	-	0	-
20(Stability and mechanical hazards)	-	0	-
21(Mechanical strength)	-	0	-
21.101(Mechanical strength)	-	0	-
21.102(Mechanical strength)	-	0	-
21.103(Mechanical strength)	-	0	-
22(Construction)	-	0	-
23(Internal wiring)	-	0	-
24(Components)	-	0	-
25("Supply connection and external flexible cords")	-	0	-
26("Terminals for external conductors")	-	0	-
27(Provision for earthing)	-	0	-
28(Screws and connections)	-	0	-
29("Clearances, creepage distances and solid insulation")	-	0	-
30("Resistance to heat and fire ")	-	0	-
31(Resistance to rusting)	-	0	-

20 Jun, 2028

-
Included w.e.f. 08.04.2026 Exclusion: 22.32 (Construction)

475

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 4454 : Part 1 (2001)

Steel wire for mechanical springs - Specification: Part 1 cold drawn unalloyed steel wire (Third Revision)

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Workmanship)	-	200	-
Cl 9(Diameter & Difference Between Two Reading On Any Two Diameters)	-	200	-
Cl 10(Tensile Test, Wrap Test, Torsion Test, Bend Test, Coiling and Stretching, Cast of wire, Deep Etch Test & Decarburization Test)	-	3000	-
Cl 8(Workmanship)	-	200	-
Cl 9(Diameter & Difference Between Two Reading On Any Two Diameters)	-	250	-
Cl 10(Tensile Test, Wrap Test, Torsion Test, Bend Test, Coiling and Stretching, Cast of wire, Deep Etch Test & Decarburization Test)	-	3000	-
Cl 8(Workmanship)	-	3000	-
Cl 9(Diameter & Difference Between Two Reading On Any Two Diameters)	-	2999.99	-
Cl 10(Tensile Test, Wrap Test, Torsion Test, Bend Test, Coiling and Stretching, Cast of wire, Deep Etch Test & Decarburization Test)	-	3000	-
7.1, 7.2(copper)	-	200	-
7.1, 7.2(Vanadium)	-	200	-
7.1, 7.2(phosphorus)	-	200	-
7.1, 7.2(sulphur)	-	200	-
7.1, 7.2(manganese)	-	200	-
7.1, 7.2(silicon )	-	200	-
7.1, 7.2(carbon)	-	200	-
7.1, 7.2(copper)	-	200	-
7.1, 7.2(Chromium)	-	200	-
7.1, 7.2(phosphorus)	-	200	-
7.1, 7.2(sulphur)	-	200	-
7.1, 7.2(manganese)	-	200	-
7.1, 7.2(silicon )	-	200	-
7.1, 7.2(carbon)	-	200	-
7.1, 7.2(copper)	-	200	-
7.1, 7.2(Chromium)	-	200	-
7.1, 7.2(phosphorus)	-	200	-
7.1, 7.2(sulphur)	-	200	-
7.1, 7.2(manganese)	-	200	-
7.1, 7.2(silicon )	-	200	-
7.1, 7.2(carbon)	-	200	-
7.1, 7.2(copper)	-	200	-
7.1, 7.2(Vanadium)	-	200	-
7.1, 7.2(Chromium)	-	200	-
7.1, 7.2(phosphorus)	-	200	-
7.1, 7.2(sulphur)	-	200	-
7.1, 7.2(manganese)	-	200	-
7.1, 7.2(silicon )	-	200	-
7.1, 7.2(carbon)	-	200	-
7.1, 7.2(copper)	-	200	-
7.1, 7.2(Vanadium)	-	200	-
7.1, 7.2(Chromium)	-	200	-
7.1, 7.2(phosphorus)	-	200	-
7.1, 7.2(sulphur)	-	200	-
7.1, 7.2(manganese)	-	200	-
7.1, 7.2(silicon )	-	200	-
7.1, 7.2(carbon)	-	200	-
7.1, 7.2(copper)	-	200	-
7.1, 7.2(Vanadium)	-	200	-
7.1, 7.2(Chromium)	-	200	-
7.1, 7.2(phosphorus)	-	200	-
7.1, 7.2(sulphur)	-	200	-
7.1, 7.2(manganese)	-	200	-
7.1, 7.2(silicon )	-	200	-
7.1, 7.2(carbon)	-	200	-
7.1, 7.2(copper)	-	200	-
7.1, 7.2(Vanadium)	-	200	-
7.1, 7.2(Chromium)	-	200	-
7.1, 7.2(phosphorus)	-	200	-
7.1, 7.2(sulphur)	-	200	-
7.1, 7.2(manganese)	-	200	-
7.1, 7.2(silicon )	-	200	-
7.1, 7.2(carbon)	-	200	-
7.1, 7.2(copper)	-	200	-
7.1, 7.2(Vanadium)	-	200	-
7.1, 7.2(Chromium)	-	200	-
7.1, 7.2(phosphorus)	-	200	-
7.1, 7.2(sulphur)	-	200	-
7.1, 7.2(manganese)	-	200	-
7.1, 7.2(silicon )	-	200	-
7.1, 7.2(carbon)	-	200	-
7.1, 7.2(copper)	-	200	-
7.1, 7.2(Vanadium)	-	200	-
7.1, 7.2(Chromium)	-	200	-
7.1, 7.2(phosphorus)	-	200	-
7.1, 7.2(sulphur)	-	200	-
7.1, 7.2(manganese)	-	200	-
7.1, 7.2(silicon )	-	200	-
7.1, 7.2(carbon)	-	200	-
7.1, 7.2(copper)	-	200	-
7.1, 7.2(phosphorus)	-	200	-
7.1, 7.2(sulphur)	-	200	-
7.1, 7.2(manganese)	-	200	-
7.1, 7.2(silicon )	-	200	-
7.1, 7.2(carbon)	-	200	-
7.1, 7.2(copper)	-	200	-
7.1, 7.2(phosphorus)	-	200	-
7.1, 7.2(sulphur)	-	200	-
7.1, 7.2(manganese)	-	200	-
7.1, 7.2(silicon )	-	200	-
7.1, 7.2(carbon)	-	200	-
7.1, 7.2(copper)	-	200	-
7.1, 7.2(phosphorus)	-	200	-
7.1, 7.2(sulphur)	-	200	-
7.1, 7.2(manganese)	-	200	-
7.1, 7.2(silicon )	-	200	-
7.1, 7.2(carbon)	-	200	-
7.1, 7.2(nitrogen)	-	200	-
7.1, 7.2(micro alloy)	-	200	-
7.1, 7.2(cu + cr+ni)	-	200	-
7.1, 7.2(sulphur + phosphorus)	-	200	-
7.1, 7.2(copper)	-	200	-
7.1, 7.2(phosphorus)	-	200	-
7.1, 7.2(sulphur)	-	200	-
7.1, 7.2(manganese)	-	200	-
7.1, 7.2(silicon )	-	200	-
7.1, 7.2(carbon)	-	200	-
7.1, 7.2(cu + cr + ni)	-	200	-
7.1, 7.2(sulphur + phosphorus)	-	200	-
7.1, 7.2(copper)	-	200	-
7.1, 7.2(phosphorus)	-	200	-
7.1, 7.2(sulphur)	-	200	-
7.1, 7.2(manganese)	-	200	-
7.1, 7.2(silicon )	-	200	-
7.1, 7.2(carbon)	-	200	-
Cl 10(Tensile Test, Wrap Test, Torsion Test, Bend Test, Coiling and Stretching, Cast of wire, Deep Etch Test & Decarburization Test)	-	2999.98	-
Cl 9(Diameter & Difference Between Two Reading On Any Two Diameters)	-	200	-
Cl 8(Workmanship)	-	200	-
Cl 10(Tensile Test, Wrap Test, Torsion Test, Bend Test, Coiling and Stretching, Cast of wire, Deep Etch Test & Decarburization Test)	-	2999.99	-
Cl 9(Diameter & Difference Between Two Reading On Any Two Diameters)	-	199.98	-
Cl 8(Workmanship)	-	200	-
11(Coating and surface finish)	-	200	-
11(Coating & Surface finish)	-	200	-
15(Marking)	-	200	-
8(Freedom from defects)	-	200	-
11(Surface finish)	-	200	-
15(Marking)	-	200	-
11(Coating & Surface finish)	-	200	-
15(Marking)	-	200	-

-
included w.e.f 16.03.2026

476

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 814 (2004)

Covered electrodes for manual metal arc welding of carbon and carbon manganese steel - Specification (Sixth Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 & 8.2(Carbon- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	5000	For complete chemical tests
6 & 8.2(Silicon- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	5000	For complete chemical tests
6 & 8.2(Manganese- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	5000	For complete chemical tests
6 & 8.2(Phosphorous- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	5000	For complete chemical tests
6 & 8.2(Sulphur- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	5000	For complete chemical tests
6 & 8.2(Copper- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	5000	For complete chemical tests
6 & 8.2(Vanadium- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	5000	For complete chemical tests
6 & 8.2(Titanium- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	5000	For complete chemical tests
6 & 8.2(Alumiminium- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	5000	For complete chemical tests
6 & 8.2(Cr+Ni+Mo - Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	5000	For complete chemical tests
6 & 8.2(Chromium- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	5000	For complete chemical tests
6 & 8.2(Nickel- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	5000	For complete chemical tests
6 & 8.2(Molybdenum- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	5000	For complete chemical tests
6 & 8.2(Mn+Ni+Cr+Mo+V - Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	5000	For complete chemical tests
7.1.1(Diameter of Core Wire)	-	2500	For complete dimensional tests
7.1.2(Length of Electrodes)	-	2500	For complete dimensional tests
7.2.1(Contact End)	-	2500	For finish and other qualitative tests.
7.2.2(Arc striking End)	-	2500	For finish and other qualitative tests.
7.3(Concentricity of Flux covering with core wire)	-	2500	For finish and other qualitative tests.
7.4(Defects of Core wire and Coverings)	-	2500	For finish and other qualitative tests.
9.1.2 Table 6 (Ultimate Tensile Strength-Annex F)	-	12500	For complete mechanical tests
9.1.2 Table 6 ( Yield Stress -Annex F)	-	12500	For complete mechanical tests
9.1.2 Table 6 (Percentage Elongation on Gauge Length-Annex F)	-	12500	For complete mechanical tests
9.1.3 Table 6 ( Impact Strength-Annex F)	-	12500	For complete mechanical tests
9.2(Butt Weld Bend Test-IS 1599)	-	12500	For complete mechanical tests
9.3(Running PerformanceTest-Annex H)	-	2500	-
9.4(Increased Metal Recovery Test-IS 13043)	-	2500	-
9.5(Diffusible Hydrogen Evaluation Test-IS 11802)	-	12500	For complete mechanical tests
9.6(Radiographic Test- IS 1182)	-	0	Excluded
CL 7.1.1(Average length of electrodes (10))	-	2500	For complete dimensional tests
CL 7.2.1(Average length of Contact End (10))	-	2500	For complete dimensional tests
CL 7.2.2(Average length of arc striking end (10))	-	2500	For complete dimensional tests
6 & 8.2(Carbon- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	-	-
6 & 8.2(Silicon- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	-	-
6 & 8.2(Manganese- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	-	-
6 & 8.2(Phosphorous- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	-	-
6 & 8.2(Sulphur- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	-	-
6 & 8.2(Copper- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	-	-
6 & 8.2(Vanadium- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	-	-
6 & 8.2(Titanium- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	-	-
6 & 8.2(Alumiminium- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	-	-
6 & 8.2(Cr+Ni+Mo - Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	-	-
6 & 8.2(Chromium- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	-	-
6 & 8.2(Nickel- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	-	-
6 & 8.2(Molybdenum- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	-	-
6 & 8.2(Mn+Ni+Cr+Mo+V - Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	-	-
7.1.1(Diameter of Core Wire)	-	-	-
7.1.2(Length of Electrodes)	-	-	-
7.2.1(Contact End)	-	-	-
7.2.2(Arc striking End)	-	-	-
7.3(Concentricity of Flux covering with core wire)	-	-	-
7.4(Defects of Core wire and Coverings)	-	-	-
9.1.2 Table 6 (Ultimate Tensile Strength-Annex F)	-	-	-
9.1.2 Table 6 ( Yield Stress -Annex F)	-	-	-
9.1.2 Table 6 (Percentage Elongation on Gauge Length-Annex F)	-	-	-
9.1.3 Table 6 ( Impact Strength-Annex F)	-	-	-
9.2(Butt Weld Bend Test-IS 1599)	-	-	-
9.3(Running PerformanceTest-Annex H)	-	-	-
9.4(Increased Metal Recovery Test-IS 13043)	-	-	-
9.5(Diffusible Hydrogen Evaluation Test-IS 11802)	-	-	-
9.6(Radiographic Test- IS 1182)	-	-	-
CL 7.1.1(Average length of electrodes (10))	-	-	-
CL 7.2.1(Average length of Contact End (10))	-	-	-
CL 7.2.2(Average length of arc striking end (10))	-	-	-

-
included w.e.f 16.03.2026

477

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 6419 (1996)

Welding rods and bare electrodes for gas shielded arc welding of structural steel - Specification (First Revision)

18300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Diameter)	-	2000	For complete dimensional tests
6(Reels for Wire)	-	2000	For finish and other qualitative tests
7(Reeling Condition)	-	2000	For finish and other qualitative tests
8(Dimension of Spools, Rims & Coils)	-	2000	For complete dimensional tests
9(Lengthof Rods)	-	2000	For complete dimensional tests
10.1(Finish)	-	2000	For finish and other qualitative tests
10.1(Copper Content of Coated Wire or Rod)	-	2000	For finish and other qualitative tests
10.2.1 Table 5(Tensile Strength-IS 1608(P-1))	-	9300	For complete mechanical tests
10.2.2 Table 6(Cast- As per Cl.10.2.2 )	-	2000	For finish and other qualitative tests
10.2.3 Table 6(Helix- As per Cl.10.2.3 )	-	2000	For finish and other qualitative tests
14.1 Table 7(Carbon-Relevant parts of IS 228)	-	5000	For complete Chemical tests
14.1 Table 7(Manganese-Relevant parts of IS 228)	-	5000	For complete Chemical tests
14.1 Table 7(Silicon-Relevant parts of IS 228)	-	5000	For complete Chemical tests
14.1 Table 7(Phosphorous-Relevant parts of IS 228)	-	5000	For complete Chemical tests
14.1 Table 7(Sulphur-Relevant parts of IS 228)	-	5000	For complete Chemical tests
14.1 Table 7(Nickel-Relevant parts of IS 228)	-	5000	For complete Chemical tests
14.1 Table 7(Chromium-Relevant parts of IS 228)	-	5000	For complete Chemical tests
14.1 Table 7(Molybdenum-Relevant parts of IS 228)	-	5000	For complete Chemical tests
14.1 Table 7(Vanadium-Relevant parts of IS 228)	-	5000	For complete Chemical tests
14.1 Table 7(Copper-Relevant parts of IS 228)	-	5000	For complete Chemical tests
14.1 Table 7(Titanium-Relevant parts of IS 228)	-	5000	For complete Chemical tests
14.1 Table 7(Zirconium-Relevant parts of IS 228)	-	5000	For complete Chemical tests
14.1 Table 7(Aluminium-Relevant parts of IS 228)	-	5000	For complete Chemical tests
14.1 Table 7(Mo+Ni+Cr-Relevant parts of IS 228)	-	5000	For complete Chemical tests
10.2.1(Welding rods and bare electrodes for gas shielded arc welding of structural steel)	-	2000	For finish and other qualitative tests
14.2(Soundness test)	-	0	Except RT
14.3.2(UTS)	-	9300	For complete mechanical tests
14.3.2(Yield Stress)	-	9300	For complete mechanical tests
14.3.2(% of Elongation)	-	9300	For complete mechanical tests
14.3.3(Impact Test)	-	9300	For complete mechanical tests

-
1. 14.2 (Soundness test) Soundness Test Except RT

478

TEKNOLAB QUALITY SERVICES PRIVATE LIMITED

8196926

IS 18689 (2024)

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	5000	-
8(Protection against access to live parts)	-	10000	-
10(Power input and current)	-	20000	-
10.101(Power input and current)	-	10000	-
11(Heating)	-	20000	-
13.1 &13.2(Leakage current test)	-	5000	-
13.1 &13.3(Electric strength test)	-	5000	-
14(Transient overvoltages)	-	5000	-
15(Moisture resistance)	-	10000	-
15.101,15.102,15.103(Moisture resistance)	-	5000	-
16.1 &16.2(Leakage current test)	-	5000	-
16.1 & 16.3(Electric strength test)	-	5000	-
17(Overload protection of transformers and associated circuits)	-	5000	-
19(Abnormal operation)	-	5000	-
19.101(Abnormal operation)	-	5000	-
19.102(Abnormal operation)	-	5000	-
19.103(Abnormal operation)	-	5000	-
20(Stability and mechanical hazards)	-	5000	-
21(Mechanical strength)	-	6000	-
21.101(Mechanical strength)	-	2000	-
21.102(Mechanical strength)	-	2000	-
21.103(Mechanical strength)	-	2000	-
22(Construction)	-	5000	-
23(Internal wiring)	-	2000	-
24(Components)	-	2000	-
25("Supply connection and external flexible cords")	-	2000	-
26("Terminals for external conductors")	-	2000	-
27(Provision for earthing)	-	5000	-
28(Screws and connections)	-	2000	-
29("Clearances, creepage distances and solid insulation")	-	2000	-
30("Resistance to heat and fire ")	-	2000	-
31(Resistance to rusting)	-	2000	-

-
Cl.22.32, Cl.24, Cl.19.11.4.1 to Cl.19.11.4.7(EMI/EMC Test), Cl. 15(IPX8 and IPX9)

479

EKO PRO ENGINEERS PRIVATE LIMITED (32/37) GHAZIABAD

8164006

IS 17153 (2019)

Domestic gas stoves for use with piped natural gas (PNG) - Specification

All Grade

37000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
26(Burner-5)	-	37000	-
26(Burner-4)	-	37000	-
26(Burner-3)	-	37000	-
26(Burner-2)	-	37000	-
26(Burner-1)	-	37000	-
25.2(With the Burner lighted on full on, the flame temperature at a height of H+20 mm)	-	37000	-
25.1(Temperature of synthetic rubber diaphragm in gas carrying components)	-	37000	-
25.1(Temperature of the surface in normal use)	-	37000	-
25.1(Temperature of the portion of the surface other than the working surface likely to be touched accidentally.)	-	37000	-
25.1(Rise of Temperature above room temperature in (Wall, Floor, Ceiling), after two hours of operation)	-	37000	-
24(Burner-5)	-	37000	-
24(Burner-4)	-	37000	-
24(Burner-3)	-	37000	-
24(Burner-2)	-	37000	-
24(Burner-1)	-	37000	-
23(When operated at pressure 20-25 gf/cm2 , there shall be no extinction of flame on any of the burneroperating at the max of the burner, when the appliance is placed in normal current of air with velocity of 2 m/s.)	-	37000	-
22(When operated at pressure 20-25 gf/cm2 , for one at full on position, no soot shall be deposited on burner or on the bottom of the vessel.)	-	37000	-
21(When operated at pressure 20-25 gf/cm2 for half an hour flame shall be reduced to simmer and then brought back to full on, operation shall be repeated five times, no flash back shall occur during the test.)	-	37000	-
20(Ignition of Burner flame, their operation and turning off shall not give rise to undue excessive noise during the operation.)	-	37000	-
19.3(Fixed Min Pilot flame shall be sufficient to relight the main burner at the 21 mbar gas inlet pressure.)	-	37000	-
19.2(Pilot Flame shall be Stable without lifting or soot deposition at gas inlet pressure from 20-25 gf/cm2)	-	37000	-
19.1.1(When the gas consumption of the burner is reduced to simmer after operating half an hour on full ON flame shall not extinguish, blow off, strike back or form soot at 21 mbar gas inlet pressure.)	-	37000	-
19.1(It shall be possible to operate stove with taps fully open at gas inlet pressure , without the flame extinguishing, blowing off or striking back and without the formation of soot.)	-	37000	-
18.4.1(The flame failure device if provided shall confirm to IS:5116)	-	37000	-
18.3(When the burner is ignited from a pilot flame and/or by an electric/electronic method, the ignition and flame travel shall be smooth at pressure……..)	-	37000	-
18.2(if the flame is applied to any of the outer row of the burner ports when the gas is flowing , flame travel shall be complete……..)	-	37000	-
18.1(Where the burner or burners are lighted by automatic ignition (Battery of flint operated or by a pilot flame , it shall not be possible for gas to be admitted to the main burner without being smoothly ignited by the pilot flame. Each burner should be at room temperature at the begining of the test and should be tested in turn. )	-	37000	-
18.1(There shall be easy and safe access of lighting each burner by matchstick and it shall be easy to see that the burner is lighted)	-	37000	-
17.3(When the gas consumption of the burner is reduced to simmer, the flame shall not extinguish, blow off, strike back or form soot, when tested with commercial PNG at 21 mbar gas inlet pressure.)	-	37000	-
17.2(Burner-5)	-	37000	-
17.2(Burner-4)	-	37000	-
17.2(Burner-3)	-	37000	-
17.2(Burner-2)	-	37000	-
17.2(Burner-1)	-	37000	-
17.2(Sim Rating Declared)	-	37000	-
17.1.2(Total Gas Consumption)	-	37000	-
17.1(Burner-5)	-	37000	-
17.1(Burner-4)	-	37000	-
17.1( Burner-3)	-	37000	-
17.1( Burner-2)	-	37000	-
17.1( Burner-1)	-	37000	-
17.1(Rating Declared)	-	37000	-
15.2(Fragmentation test of the toughened glass to )	-	37000	-
15.1(Verification of the strength of the gas stove surface of the toughened glass top against thermal stress)	-	37000	-
15(Width wise deflection)	-	37000	-
15(Length wise deflection)	-	37000	-
15(Vertical Deflection)	-	37000	-
14.5(The position of the gas inlet shall allow connection to a gas supply on either side of the appliances, the rear end or bottom is also permitted. It shall be possible to change gas inlet from one side to other side easily by standard tools.)	-	37000	-
14.4(Any other connection made from the main gas rail shall be only metallic.)	-	37000	-
14.4(The external surface of the gas rail shall be treated to resist corrosion)	-	37000	-
14.4(The wall thickness of main gas rail)	-	37000	-
14.4(The pipe/tube used for main gas rail shall be of mild steel)	-	37000	-
14.3(Screwed gas Inlet and outlet connections shall confirm to IS:554, Declared by party)	-	37000	-
14.2((e))	-	37000	-
14.2((d))	-	37000	-
14.2(( c))	-	37000	-
14.2((b))	-	37000	-
14.2(Shape of Nozzles as per fig. 3 : (a))	-	37000	-
14.2(Where Nozzles for flexible tubing are fitted, they shall be so positioned as to facilitate fitting of the tubing and also to prevent heating of the tubing to more than 60°C)	-	37000	-
14.1(Nozzle shall be machined from free cutting brass, MS, SS, Zinc)	-	37000	-
13(All gas carrying parts of the appliances should be sound and these parts when connected to form complete assembly shall also be sound against any gas leakage. The complete assembly shall be checked at 14.71 kN/m²)	-	37000	-
12.1.2(The material of the pan support shall be metallic.)	-	37000	-
12.1.1(Loose Pan support shall be so designed that it is not possible to place them firmly in other than proper position)	-	37000	-
12.1(Prongs of the Support shall have suitable taper to accommodate round bottom pans.)	-	37000	-
12.1(The design of the pan supports shall be such that it is practicable to support a pan of 100 mm diameter over at least one top burner without the use of loose rings and such that 125 mm diameter vessel remains stable over each burner. )	-	37000	-
11.7(The appliance comprising two or more burners shall include one burner having a rating of at least 1450 kCal/hr, based on net calorific value of the gas (When using domestic PNG))	-	37000	-
11.6(For Burners having centre flame, provision shall be made to protect the centre flame from pan resting directly on burner top and smothering the centre flame. )	-	37000	-
11.5(If the burner is made and assembled in two or more parts they shall be so designed to provide proper self locating arrangement so that they are always reassembled to its original design preventing any maladjustment in their assembly. This shall also be applicable for primary air regulators.)	-	37000	-
11.4(If primary air regulators are used, they shall be so designed that they are not easily maladjusted by the user and the construction shall be such that primary air adjustment can be made with the burner in place.)	-	37000	-
11.3(The tightness of the joints in the burner assembly shall not be depended upon adhesives or any kind of packing.)	-	37000	-
11.2(The Burner supports shall be rigid and shall be fixed in their place. Their construction shall ensure the stability of the burners and shall prevent their undue movement in a horizontal plane.)	-	37000	-
11.1(The construction of the burners and the assembly shall allow their dismantling from the supports easily with or without the use of tools)	-	37000	-
10.2(The Size of the jet in Litres per hour of flow of PNG at STP conditions shall be impressed upon it.)	-	37000	-
10.1.1(Injector Jet shall be made of metal , with or without ceramic tip. The melting point of the metal shall not be less than 650°C)	-	37000	-
10.1(Dimension- Threads)	-	37000	-
10.1(Dimension- Projection from the face of mounting, Nominal)	-	37000	-
10.1(Dimension- Across Flats)	-	37000	-
10.1(The Injector Jets shall be fixed calibrated type and it shall not be possible to loosen them without the use of tools.)	-	37000	-
9.12(The noting means adopted shall be sufficiently robust to withstand normal use without distortion or damage.)	-	37000	-
9.11.1(Simmer flame shall be obtained by fixed simmer orifice.)	-	37000	-
9.11(Taps having an 'OFF' position shall have positive stops at the 'OFF' and simmer position except that special purpose taps (for appliance incorporating auto or self ignition device))	-	37000	-
9.1(Screw-down valves shall be so designed that it is impossible to withdraw completely the valve stem in the normal operation of the tap.)	-	37000	-
9.9(Screws nuts etc., which regulate the tension of taps valve or springs shall not loosen in operation of the appliance. It shall not be possible to cause a leak during normal manual operation of tap.)	-	37000	-
9.8(All controls or taps shall be easy to operate at all temperatures normally attained in use)	-	37000	-
9.7(C1)	-	37000	-
9.7(B1)	-	37000	-
9.7(A1)	-	37000	-
9.7(D)	-	37000	-
9.7(C)	-	37000	-
9.7(B)	-	37000	-
9.7(A)	-	37000	-
9.7(Dimension of Taper plugs in off position:)	-	37000	-
9.6(Each taper plug tap shall be spring loaded to maintain a gas tight fit. Helical springs fitted in taps and valves shall have flattened ends, which shall be rounded before fitting.)	-	37000	-
9.5.1(Taps shall be lubricated with suitable grease, resistant to the action of the gas and capable of operating at the maximum temperature of 110°C.)	-	37000	-
9.5(Taps shall be so made that in normal use and reasonable application of lubricant, the gas passages do not become blocked.)	-	37000	-
9.4(Preferably all taps (Excluding pilot taps) should lock in the off position, but in all cases it shall be impossible to handle or tap to move accidentally…. )	-	37000	-
9.3(When Taps are fitted with adjustable stops, there shall be means of looking the stops in position. If screws are used for this purpose, they shall not lead into gas passages.)	-	37000	-
9.2(Taps shall be designed so that when placed in any position and viewed from a distance of 3 m, will definitely indicate whether the valve is open, closed or in intermediate position.)	-	37000	-
9.2(All Taps shall close in the same direction. The direction of rotation of knob from off-on-simmer shall be anti-clockwise.)	-	37000	-
9.2(The 'ON' "OFF" and any fixed position of tap handles shall be clearly and durably indicated or shall be obvious by design or position else some indication shall be provided.)	-	37000	-
9.1(The Appliance shall have at least one tap for each burner)	-	37000	-
8.7(The external Finished surfaces shall be easily cleanable.)	-	37000	-
8.6(All springs, screws, nuts and bolts which are visible or to be removed for maintenance, shall be of corrosion-resistant material or treated to resist corrosion.)	-	37000	-
8.5(Concealed Gas Supplies: Concealed tubular fittings liable to corrode shall be protected by bituminous paint or other equally protective material.)	-	37000	-
8.4 (b)(Resistance to Heating)	-	37000	-
8.4 (a)(Resistance to Abrasion)	-	37000	-
8.3.3(Corrosion Resistance test)	-	37000	-
8.3.2(Adhesion Test)	-	37000	-
8.3.1(Thickness of Chromium coating)	-	37000	-
8.3(Thickness of Nickel coating of the top flat surface of the body of electroplated stove.)	-	37000	-
8.2(Vitreous enameled component shall meet the requirement when tested in accordance with Annex E of IS:5116)	-	37000	-
8.1(The finishes shall, on visual examination, show no defects, such as pin-holes, blisters, roughness or exposed area of metal, which give rise to undualy rapid deterioration in use.)	-	37000	-
8.1(Parts, which will come in contact with the foodstuff, shall be capable of being hygienically cleaned.)	-	37000	-
8.1(The Finish of exposed parts shall be durable, easy to clean and not subject to excessive deterioration in normal use.)	-	37000	-
7(Rigidity and Stability : The appliance shall be so designed that it remains stable and shall not be easily overturned.)	-	37000	-
6.7(Thickness of Sheet)	-	37000	-
6.6(All nuts, bolts and fittings having spanner flats shall be capable of being moved by suitable spanner or be readily accessible to an adjustable spanner.)	-	37000	-
6.5(Parts, which are intented to be removable by the user, shall be easy to replace correctly and difficult to assemble incorrectly.)	-	37000	-
6.4(Burners and parts of Burner only of same rating , model and make shall be interchangeable or replaceable without effecting performance.)	-	37000	-
6.3(Burner ports shall be so designed and located that in normal use spilage of food shall not cause internal fouling of mixing tube and or blockage of injector jet.)	-	37000	-
6.2(The relative distance between the centres of the adjoining burner-)	-	37000	-
6.2(the parts of the burner shall not become disconnected during operation of the appliance.)	-	37000	-
6.1(The appliance, including all the component parts, shall be easy to clean and maintain in good working order, there shall be easy access to the accessories and controls for maintenance and adjustment.)	-	37000	-
5.8.3(The number of glass fragments contained in a 50 mm side square, when tested as Cl. 15.2)	-	37000	-
5.8.3(Toughened glass shall fragment into small particles.)	-	37000	-
5.8.2(Pan support for an uncovered burner in contact with the glass ceramic surface.The surface area of the pan support in contact with the glass ceramic)	-	37000	-
5.8.2(The toughened glass top shall ensure durability against damage in normal use)	-	37000	-
5.8.2(The means to hold the glass top of the gas stove shall not allow any stress or risk of mechanical change to the glass top.)	-	37000	-
5.8.1(Toughened glass top including their edges or corners shall not have fissures or scratches)	-	37000	-
5.7(Drip tray if provided shall be made of non-corrosive material)	-	37000	-
5.6(Meltiing poin of metal used in oven, griller or auxilliary or anyother combination)	-	37000	-
5.6(Melting point of metal for burner top)	-	37000	-
5.5(The main body of the burner including mixer head, mixing tube and burner head shall be of substantial and durable construction)	-	37000	-
5.4(Change in weight or volume of a non metallic material, when immerse in n-Pentane or PNG for 72 hours)	-	37000	-
5.3(Mercurous Nitrate test for copper and copper alloy Parts)	-	37000	-
5.2(The burner parts shall not melt or distort when burner is operated with flames flashed back for half an hour in the mixing tube.)	-	37000	-
5.1.1(Plastic components which are liable to heating (For example, tap handles push buttons etc.) shall be free of fissures, distortion, blemishes and discolouration)	-	37000	-
5.1(The use of low pressure rubber or plastic tubing fitted or pushed on nozzle is not recommended.)	-	37000	-
5.1(If flexible tubing is used, it shall not be fitted on the outlet side of any control which is capable of cutting of the gas completely, except where screwed metal connection are fitted.)	-	37000	-
5.1(The appliance shall be free from swarf, grit and other foreign matters.)	-	37000	-
4.3(No pressure regulator shall be included as part of the stove.)	-	37000	-
4.2(Rivets, Fastening screws and plugs , etc. shall not lead into gas passages.)	-	37000	-
4.1(The construction of all the parts of equipment shall be sound and of high standard of workmanship and appropriate finish. The construction shall ensure durability and shall comply with the safety requirements.)	-	37000	-
4.1(General)	-	37000	-
4.2(General)	-	37000	-
4.3(General)	-	37000	-
5.1(Materials)	-	37000	-
5.1(Materials)	-	37000	-
5.1(Materials)	-	37000	-
5.1(Materials)	-	37000	-
5.1.1(Materials)	-	37000	-
5.2(Materials)	-	37000	-
5.3(Materials)	-	37000	-
5.4(Materials)	-	37000	-
5.5(Materials)	-	37000	-
5.5(Materials)	-	37000	-
5.5(Materials)	-	37000	-
5.7(Materials)	-	37000	-
5.8.1(Materials)	-	37000	-
26(Thermal Efficiency)	-	37000	-
5.8.2 (a)(Materials)	-	37000	-
5.8.2 (a)(Materials)	-	37000	-
5.8.2 (a)(Materials)	-	37000	-
26(Thermal Efficiency)	-	37000	-
5.8.2 (a)(Materials)	-	37000	-
5.8.2 (a)(Materials)	-	37000	-
26(Thermal Efficiency)	-	37000	-
5.8.2 (a)(Materials)	-	37000	-
26(Thermal Efficiency)	-	37000	-
5.8.2 (b)(Materials)	-	37000	-
26(Thermal Efficiency)	-	37000	-
5.8.2 (c )(Materials)	-	37000	-
25.2(Fire Hazard and Limiting Temperature)	-	37000	-
5.8.2 (d)(Materials)	-	37000	-
25.1(Fire Hazard and Limiting Temperature)	-	37000	-
5.8.2 (d)(Materials)	-	37000	-
25.1(Fire Hazard and Limiting Temperature)	-	37000	-
25.1(Fire Hazard and Limiting Temperature)	-	37000	-
5.8.2 (e)(Materials)	-	37000	-
25.1(Fire Hazard and Limiting Temperature)	-	37000	-
5.8.2 (e)(Materials)	-	37000	-
5.8.2 (e)(Materials)	-	37000	-
24.2(Combustion)	-	37000	-
5.8.2 (e)(Materials)	-	37000	-
24.1(Combustion)	-	37000	-
5.8.2 (e)(Materials)	-	37000	-
24.1(Combustion)	-	37000	-
5.8.3 (a)(Materials)	-	37000	-
23(Resistance to Draught)	-	37000	-
5.8.3 (b)(Materials)	-	37000	-
5.8.3 (c)(Materials)	-	37000	-
22(Formation of soot)	-	37000	-
21(Flash Back)	-	37000	-
5.8.3 (d)(Materials)	-	37000	-
20(Noise Control)	-	37000	-
5.8.3 (e)(Materials)	-	37000	-
5.8.3 (f)(Materials)	-	37000	-
19.3(Flame Stability)	-	37000	-
6.1(Design for Maintenance)	-	37000	-
19.2(Flame Stability)	-	37000	-
6.1(Design for Maintenance)	-	37000	-
19.1.1(Flame Stability)	-	37000	-
6.2(Design for Maintenance)	-	37000	-
6.2(Design for Maintenance)	-	37000	-
19.1(Flame Stability)	-	37000	-
6.3(Design for Maintenance)	-	37000	-
18.4(Ignition and Flame Travel)	-	37000	-
6.4(Design for Maintenance)	-	37000	-
18.3(Ignition and Flame Travel)	-	37000	-
6.5(Design for Maintenance)	-	37000	-
18.2(Ignition and Flame Travel)	-	37000	-
18.1(Ignition and Flame Travel)	-	37000	-
18.1(Ignition and Flame Travel)	-	37000	-
6.6(Design for Maintenance)	-	37000	-
17.0(Gas Consumption)	-	37000	-
6.7(Design for Maintenance)	-	37000	-
17.0(Gas Consumption)	-	37000	-
17.0(Gas Consumption)	-	37000	-
17.0(Gas Consumption)	-	37000	-
17.0(Gas Consumption)	-	37000	-
17.0(Gas Consumption)	-	37000	-
17.0(Gas Consumption)	-	37000	-
17.0(Gas Consumption)	-	37000	-
17.0(Gas Consumption)	-	37000	-
9.11(Gas Taps)	-	37000	-
7.1(Rigidity and Stability)	-	37000	-
7.2(Rigidity and Stability)	-	37000	-
7.3(Rigidity and Stability)	-	37000	-
8.1(Workmanship and Finish)	-	37000	-
8.1(Workmanship and Finish)	-	37000	-
8.2 & 8.2.1(Workmanship and Finish)	-	37000	-
8.3(Workmanship and Finish)	-	37000	-
8.3(Workmanship and Finish)	-	37000	-
8.3.2(Workmanship and Finish)	-	37000	-
8.4 (a)(Workmanship and Finish)	-	37000	-
8.4 (b)(Workmanship and Finish)	-	37000	-
8.5(Workmanship and Finish)	-	37000	-
8.6(Workmanship and Finish)	-	37000	-
8.7(Workmanship and Finish)	-	37000	-
9.1(Gas Taps)	-	37000	-
9.2(Gas Taps)	-	37000	-
9.2(Gas Taps)	-	37000	-
9.2(Gas Taps)	-	37000	-
9.3(Gas Taps)	-	37000	-
9.4(Gas Taps)	-	37000	-
9.5(Gas Taps)	-	37000	-
9.11.1(Gas Taps)	-	37000	-
9.12(Gas Taps)	-	37000	-
10.1(Injector Jets)	-	37000	-
10.1 (a)(Injector Jets)	-	37000	-
10.1 (b)(Injector Jets)	-	37000	-
10.1 (c )(Injector Jets)	-	37000	-
10.1.1(Injector Jets)	-	37000	-
9.5.1(Gas Taps)	-	37000	-
10.2(Injector Jets)	-	37000	-
9.6(Gas Taps)	-	37000	-
11.1(Burners)	-	37000	-
9.7(Gas Taps)	-	37000	-
11.2(Burners)	-	37000	-
9.7(Gas Taps)	-	37000	-
11.3(Burners)	-	37000	-
9.7(Gas Taps)	-	37000	-
11.4(Burners)	-	37000	-
9.7(Gas Taps)	-	37000	-
9.7(Gas Taps)	-	37000	-
11.5(Burners)	-	37000	-
9.7(Gas Taps)	-	37000	-
11.6(Burners)	-	37000	-
9.7(Gas Taps)	-	37000	-
11.7(Burners)	-	37000	-
9.7(Gas Taps)	-	37000	-
9.8(Gas Taps)	-	37000	-
9.9(Gas Taps)	-	37000	-
9.10(Gas Taps)	-	37000	-
12.1(Pan Supports)	-	37000	-
12.1.1(Pan Supports)	-	37000	-
12.1.2(Pan Supports)	-	37000	-
13.1(Gas Soundness)	-	37000	-
14.1(Gas Inlet Connection)	-	37000	-
14.2(Gas Inlet Connection)	-	37000	-
14.2(Gas Inlet Connection)	-	37000	-
14.2(Gas Inlet Connection)	-	37000	-
14.2(Gas Inlet Connection)	-	37000	-
14.2(Gas Inlet Connection)	-	37000	-
14.2(Gas Inlet Connection)	-	37000	-
14.2(Gas Inlet Connection)	-	37000	-
14.3(Gas Inlet Connection)	-	37000	-
14.4(Gas Inlet Connection)	-	37000	-
14.4(Gas Inlet Connection)	-	37000	-
14.4(Gas Inlet Connection)	-	37000	-
14.4(Gas Inlet Connection)	-	37000	-
14.5(Gas Inlet Connection)	-	37000	-
14.5(Gas Inlet Connection)	-	37000	-
14.5(Gas Inlet Connection)	-	37000	-
15.0(Strength and Rigidity)	-	37000	-
15.0(Strength and Rigidity)	-	37000	-
15.0(Strength and Rigidity)	-	37000	-
15.0(Strength and Rigidity)	-	37000	-
17.0(Gas Consumption)	-	37000	-
17.0(Gas Consumption)	-	37000	-

27 May, 2028

-
-

480

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 17632 (2022)

General Purpose Chairs and Stools - Specification

57000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CLAUSE 5(DIMENSIONS)	-	1500	-
CLAUSE 6(SURFACE PERFORMANCE)	-	6500	-
CLAUSE 6.2(Fabric and Leather (Synthetic and Natural) Performance)	-	12500	-
CLAUSE 7.2.1(Forwards Overbalancing and Sideways Overbalancing for Chairs without Arms)	-	1000	-
CLAUSE 7.2.2(Rearwards Overbalancing)	-	1000	-
CLAUSE 7.2.3(Sideways Overbalancing for Chairs with Arms)	-	1000	-
CLAUSE 7.2.4(Sideways Overbalancing for Chairs with Arms)	-	1000	-
CLAUSE 7.3.1.1(Seat static load test)	-	1800	-
CLAUSE 7.3.1.2(Back static load test)	-	1800	-
CLAUSE 7.3.1.3(Armrests/Wings sideways static load test)	-	1800	-
CLAUSE 7.3.1.4(Arm downwards static load test)	-	1800	-
CLAUSE 7.3.1.5(Leg forward static load test)	-	1800	-
CLAUSE 7.3.1.6(Leg sideways static load test)	-	1800	-
CLAUSE 7.3.1.7(Diagonal base load test)	-	1800	-
CLAUSE 7.3.1.8(Foot rest static-load test)	-	1800	-
CLAUSE 7.3.2.1(Seat impact test)	-	1800	-
CLAUSE 7.3.2.2(Back impact test)	-	1800	-
CLAUSE 7.3.2.3(Arm impact test)	-	1800	-
CLAUSE 7.3.2.4(Drop test)	-	1800	-
CLAUSE 7.4.1(Seat Fatigue Test)	-	12500	-
CLAUSE 7.4.2(Back Fatigue Test)	-	19000	-
CLAUSE 7.4.3(Arm Rest Durability Test)	-	13000	-
Cl - 5(DIMENSIONS)	-	1500	-
Cl-6.1 (a)(Resistance to mechanical damage)	-	1000	-
Cl-6.1 (b)(Pencil hardness)	-	1000	-
Cl-6.1 (c)(Resistance to wet heat)	-	1500	-
Cl-6.1 (d)(Resistance to dry heat)	-	1500	-
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	1000	-
Cl-6.1 (f)(Resistance to marking by cold oils and fats)	-	1000	-
Cl-6.1 (g)(Adhesive performance)	-	1500	-
Cl-6.2 (a) 1(Breaking load)	-	1000	-
Cl-6.2 (a) 2(Elongation at break)	-	1000	-
Cl-6.2 (a) 3(Tear strength)	-	1000	-
Cl-6.2 (a) 4(Colour fastness to light)	-	1500	-
Cl-6.2 (a) 5(Colour fastness to rubbing)	-	1000	-
Cl-6.2 (a) 6(Colour fastness to perspiration)	-	1000	-
Cl-6.2 (a) 7(Colour fastness to water)	-	1000	-
Cl-6.2 (a) 8(Pilling resistance)	-	1000	-
Cl-6.2 (a) 9(Coating adhesion strength)	-	1000	-
Cl-6.2 (a) 10(Seam slippage)	-	1000	-
Cl-6.2 (a) 11(Resistance to damage by flexing)	-	1000	-
Cl-6.2 (a) 12(Abrasion resistance)	-	1000	-
Cl-6.2 (a) 13(Bursting strength)	-	1000	-
Cl-6.2 (a) 14(Resistance to cold)	-	1000	-
Cl-6.2 (b) 1(Tear strength)	-	1000	-
Cl-6.2 (b) 2(Flexing endurance)	-	1000	-
Cl-6.2 (b) 3(Finish adhesion)	-	1000	-
Cl-6.2 (b) 4(Colour fastness to artificial light)	-	1000	-
Cl-6.2 (b) 5(Colour fastness to rubbing)	-	1000	-
Cl-6.2 (b) 6(Colour fastness to water spotting)	-	1000	-
Cl-6.2 (b) 7(Water vapour permeability)	-	1000	-
Cl-6.2 (b) 8(Colour fastness to water)	-	1000	-
Cl-7.2.1(Forwards Overbalancing and Sideways Overbalancing for Chairs without Arms)	-	0	-
Cl-7.2.2(Rearwards Overbalancing)	-	0	-
Cl-7.2.3(Sideways Overbalancing for Chairs with Arms)	-	0	-
Cl-7.2.4(Stools/ Poufs (All Directions))	-	0	-
Cl-7.3.1(Static Load Test)	-	0	-
Cl-7.3.2(Impact Test)	-	0	-
Cl-7.4.1(Seat Fatigue Test)	-	0	-
Cl-7.4.2(Back Fatigue Test)	-	0	-
Cl-7.4.3(Arm Rest Durability)	-	0	-
Cl-9(Marking)	-	0	-
7.1(General test conditions)	-	0	-

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number