BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

14118 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

4771

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 2925 (1984)

Specification for industrial safety helmets (Second Revision)

All

12234 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1(Performance Requirements)	-	4500	-
8.2(Performance Requirements)	-	2500	-
8.3(Performance Requirements)	-	5500	-
8.4(Performance Requirements)	-	4500	-
8.5(Performance Requirements)	-	1500	-
8.6(Performance Requirements)	-	2000	-
7.1(Construction)	-	1500	-
6.1(Construction)	-	500	-
5.5(Construction)	-	500	-
5.4(Construction)	-	1000	-
5.3(Construction)	-	1000	-
5.2(Construction)	-	1500	-
5.1(Construction)	-	500	-
4.1(Sizes)	-	500	-
3.3(Material)	-	1500	-
3.2(Material)	-	1500	-
3.1(Material)	-	500	-

10 Mar, 2027

-
Included w.e.f 20.05.2025

4772

Ahmedabad Textile Industry's Research Association (ATIRA), Ahmedabad

7173002

IS 15851 (2009)

Textiles – Polyester cotton blended woven saris for uniforms

12050 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1 - 1 - (i)(Nominal count)	-	450	-
4.1 - 1 - (ii)(Length, m)	-	200	-
4.1 - 1 - (iii)(Overall width, cm)	-	200	-
4.1 - 1 - (iv)(Threads/dm)	-	300	-
4.1 - 1 - (v)(Mass, g/m2)	-	250	-
4.1 - 1 - (vi)(Fibres composition, percent)	-	950	-
4.1 - 1 - (vii)(Breaking strength on 5 cm × 20 cm strip, N (kgf))	-	650	-
4.1 - 1 - (viii)(Tear strength, N (kgf)	-	650	-
4.1 - 1 - (ix)(Dimensional stability to dry heat at)	-	450	-
4.1 - 1 - (xi)(Crease recovery angle in dry state degrees)	-	1200	-
4.1 - 1 - (xii)(Pilling resistance)	-	550	-
4.1 - 1 - (xiii)(Dimensional change on washing,)	-	1650	-
4.1 - 1 - (xiv)(pH Value of aqueous extract (Hot method))	-	350	-
4.1 - 1 - (xv)(Minimum colour fastness ratings to:)	-	4200	-

-
Included w.e.f 04.03.2025 Exclusion: Cl 4.1 - 1 - (x) (Soil release efficiency), Cl 4.3 (Anti-Bacterial Activity Value), Cl 4.2 (Limited Flame Spread Requirement)

4773

BIS, Eastern Regional Laboratory (ERL)

None

IS 5557 : Part 1 (2024)

All Rubber Gum Boots and Ankle Boots Part 1 Safety and Protective

For all type and veriety

Please see remarks View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5 (Design)	-
6 (Sizes and Fittines)	-
7 (Consturction)	-
8.1 (Lining Material)	-
8.2, Table-1 (i) (Width, mm, Min)	-
8.2, Table-1 (ii) (Breaking load, N, Min (50 cm grip length test specimen))	-
8.3, Table-2 (i) (Sewing thread for piping/binding")	-
8.4 (Use of Rubber material)	-
8.4.1, Table-3 (i) (Hardness, (IRHD))	-
8.4.1, Table-3 (ii) (Change in hardness after accelerated ageing at 100 ⁰C ± 2 ⁰C for 24 h)	-
8.5 (Upper material)	-
8.5.1 (Tensile Strength of upper)	-
8.5.2 (Thickness)	-
8.5.3 (Flexing Resistance)	-
8.5.4 (Abrasion Resistance)	-
8.6.1 (Thickness of Outsole)	-
8.6.2 (Tear Strength)	-
8.6.3 (Abrasion Resistance of Outsole)	-
8.6.4 (Flexing Resistance)	-
8.6.5 (Inter layer Bond Strength of outsole)	-
Cl-8.7 (Insocks material)	-
8.7.1 (Thickness of Insocks)	-
Cl-8.7.2 (Abrasion Resistance of Insock)	-
Cl-8.8.1 (Outsole/Heel)	-
Cl-8.9 (Leak Proof Test)	-
8.10 (Height of Upper)	-
8.11 (Adhesion Test for Rubberized Textile Upper)	-
Cl-8.12 (Upper Outsole Bond Strength)	-
Cl-8.13 (Internal Length of Toe Cap)	-
Cl-8.14 (Impact Resistance of Safety Footwear)	-
Cl-8.15 (Compression Resistance of Safety Footwear)	-
8.18 (Corrosion Resistant Test for Toe Caps)	-
9.1 (Penetration Resistance)	-
9.6 (Resistance to Fuel Oil)	-
11.2 (Marking)	-

-
Mech- Flame resistance property (Cl 9.3)

4774

SWASTIK ELECTRONICS TESTING CENTRE (OPC) PVT. LTD., GHAZIABAD

8163826

IS 302 : Part 2 : Sec 23 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 23 appliances for skin or hair care (First Revision)

24000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification)	-	1000	-
7(Marking/ Marking & Instructions)	-	1000	-
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	1000	-
9(Starting Of Motor Operated Appliances)	-	1000	-
10(Power Input & Current)	-	1000	-
11(Temperature Rise/Heating)	-	1000	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	1000	-
14(Transient Over Voltage)	-	1000	-
15(Moisture Resistance)	-	1000	-
16(Leakage Current and Electric Strength)	-	1000	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	1000	-
18(Endurance)	-	1000	-
19(Abnormal Operation)	-	1000	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
20(Stability & Mechanical Hazards)	-	1000	-
21(Mechanical strength)	-	1000	-
22(Construction)	-	500	-
22.32(CONSTRUCTION)	-	500	-
23(Internal wiring)	-	1000	-
24(Component)	-	1000	-
25(Supply Connection & External Flexible Cables and Cords)	-	1000	-
26(Terminals For External Conductors)	-	1000	-
27(Provision For Earthing)	-	1000	-
28(Screws & Connection)	-	1000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	1000	-
30(Resistance to Heat & Fire)	-	1500	-
31(Resistance to Rusting)	-	1500	-
32(Radiation ,Toxicity and similar hazards)	-	0	-
6(Classification)	-	0	-
7(Marking/ Marking & Instructions)	-	0	-
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	0	-
9(Starting Of Motor Operated Appliances)	-	0	-
10(Power Input & Current)	-	0	-
11(Temperature Rise/Heating)	-	0	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	0	-
14(Transient Over Voltage)	-	0	-
15(Moisture Resistance)	-	0	-
16(Leakage Current and Electric Strength)	-	0	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	0	-
18(Endurance)	-	0	-
19(Abnormal Operation)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
20(Stability & Mechanical Hazards)	-	0	-
21(Mechanical strength)	-	0	-
22(Construction)	-	0	-
22.32(CONSTRUCTION)	-	0	-
23(Internal wiring)	-	0	-
24(Component)	-	0	-
25(Supply Connection & External Flexible Cables and Cords)	-	0	-
26(Terminals For External Conductors)	-	0	-
27(Provision For Earthing)	-	0	-
28(Screws & Connection)	-	0	-
29(Clearances, Creepage Distances & Solid Insulation)	-	0	-
30(Resistance to Heat & Fire)	-	0	-
31(Resistance to Rusting)	-	0	-
32(Radiation ,Toxicity and similar hazards)	-	0	-
6(Classification)	-	0	-
7(Marking/ Marking & Instructions)	-	0	-
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	0	-
9(Starting Of Motor Operated Appliances)	-	0	-
10(Power Input & Current)	-	0	-
11(Temperature Rise/Heating)	-	0	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	0	-
14(Transient Over Voltage)	-	0	-
15(Moisture Resistance)	-	0	-
16(Leakage Current and Electric Strength)	-	0	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	0	-
18(Endurance)	-	0	-
19(Abnormal Operation)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
20(Stability & Mechanical Hazards)	-	0	-
21(Mechanical strength)	-	0	-
22(Construction)	-	0	-
22.32(CONSTRUCTION)	-	0	-
23(Internal wiring)	-	0	-
24(Component)	-	0	-
25(Supply Connection & External Flexible Cables and Cords)	-	0	-
26(Terminals For External Conductors)	-	0	-
27(Provision For Earthing)	-	0	-
28(Screws & Connection)	-	0	-
29(Clearances, Creepage Distances & Solid Insulation)	-	0	-
30(Resistance to Heat & Fire)	-	0	-
31(Resistance to Rusting)	-	0	-
32(Radiation ,Toxicity and similar hazards)	-	0	-

15 May, 2028

-
Included w.e.f.06.05.2025 Exclusion Cl 19.11.4.1 to Cl19.11.4.7 (EMI/EMC) 24 (Component)

4775

Atmy Analytical Labs Pvt. Ltd., Faridabad

8167506

IS 15298 : Part 2 (2024)

Personal Protective Equipment Part 2 Safety Footwear (ISO 20345 : 2021, MOD) (Third Revision)

53900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.2(Design)	-	53900	-
Cl 5.2.2, Table 4(" Height of upper ")	-	53900	-
Cl 5.2.3(Heel area)	-	53900	-
Cl 5.3.1.1(Construction of whole footwear)	-	53900	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	53900	-
Cl 5.3.2.1(Toe protection - general)	-	53900	-
Cl 5.3.2.2(Internal length)	-	53900	-
Cl 5.3.2.3(Width of toecap flange)	-	53900	-
Cl 5.3.2.4.1(Corrosion resistance of Class I footwear and hybrid mounted footwear)	-	53900	-
Cl 5.3.2.4.2(Corrosion resistance of Class II and hybrid moulded footwear)	-	53900	-
Cl 5.3.2.5(Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-	53900	-
Cl 5.3.2.6(Impact resistance)	-	53900	-
Cl 5.3.2.7(Compression resistance)	-	53900	-
Cl 5.3.3(Leak proofness)	-	53900	-
Cl 5.3.4("Specific ergonomic features ")	-	53900	-
Cl 5.3.5.2, Table 7(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	53900	-
Cl 5.3.6, Table no 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	53900	-
Cl 5.3.6, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	53900	-
Cl 5.3.6, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	53900	-
Cl 5.3.6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	53900	-
Cl 5.3.6, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	53900	-
Cl 5.3.6, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	53900	-
Cl 5.3.6, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	53900	-
Cl 5.3.6, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	53900	-
Cl 5.3.6, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	53900	-
Cl 5.3.6, Table no 1 of IS 17011 (x)(pH)	-	53900	-
Cl 5.3.6, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	53900	-
Cl 5.3.6, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	53900	-
Cl 5.3.7(Seam strength)	-	53900	-
Cl 5.3.8(Lead Content ( National Annex A))	-	53900	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	53900	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	53900	-
Cl 5.4.2(Thickness)	-	53900	-
Cl 5.4.3(Tear strength)	-	53900	-
Cl 5.4.4, Table 11(Tensile properties- Tensile strength)	-	53900	-
Cl 5.4.4, Table 11(Tensile properties- Breaking Force)	-	53900	-
Cl 5.4.4, Table 11(Tensile properties-Modulus at 100 % elongation)	-	53900	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	53900	-
Cl 5.4.5(Flexing resistance)	-	53900	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	53900	-
Cl 5.4.7(Resistance to hydrolysis)	-	53900	-
Cl 5.5.2(Lining- Tear strength)	-	53900	-
Cl 5.5.3(Lining- Abrasion resistance)	-	53900	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	53900	-
Cl 5.6.2, Table 14(Tear strength of tongue)	-	53900	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	53900	-
Cl 5.7.2(Water permeability of insock)	-	53900	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	53900	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	53900	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	53900	-
Cl 5.8.2.1, Table 15(Thickness of Outsole)	-	53900	-
Cl 5.8.2.2(Cleated area)	-	53900	-
Cl 5.8.2.3(Cleat height)	-	53900	-
Cl 5.8.3(Outsole- Tear strength)	-	53900	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	53900	-
Cl 5.8.5(Outsole-Flexing resistance)	-	53900	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	53900	-
Cl 5.8.7(Interlayer bond strength)	-	53900	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	53900	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	53900	-
Personal protective equipment: Part 2 safety footwear(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	53900	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	53900	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	53900	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	53900	-
Cl 6.2.1.4.2.1(Corrosion resistance of perforation resistant metallic insert for Class I footwear and hybrid mounted footwear)	-	53900	-
Cl 6.2.1.4.2.2(Corrosion resistance of perforation resistant metallic insert for Class II footwear and hybrid moulded footwear)	-	53900	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	53900	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	53900	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	53900	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	53900	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	53900	-
Cl 6.2.4(Energy absorption of seat region)	-	53900	-
Cl 6.2.5(Water resistance)	-	53900	-
Cl 6.2.6.1(Metatarsal protection - Construction)	-	53900	-
Cl 6.2.6.2("Metatarsal protection-Impact resistance of metatarsal protective device ")	-	53900	-
Cl 6.2.7(Ankle protection)	-	53900	-
Cl 6.2.8.2(Cut resistance footwear- design)	-	53900	-
Cl 6.2.8.2(Dimensions and construction of protective area of Cut resistance footwear)	-	53900	-
Cl 6.2.8.3(Resistance to cutting)	-	53900	-
Cl 6.2.9(Scuff cap)	-	53900	-
Cl 6.2.10 , Table 19("Slip resistance on ceramic tile floor with glycerine ")	-	53900	-
Cl 6.3(Upper — Water penetration and absorption)	-	53900	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	53900	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	53900	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	53900	-
Cl 6.4.3.2(Design of Ladder grip)	-	53900	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	53900	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	53900	-
Cl 7, Table 20("Marking ")	-	53900	-
Cl 5.2(Design)	-	53900	-
Cl 5.2.2, Table 4(" Height of upper ")	-	53900	-
Cl 5.2.3(Heel area)	-	53900	-
Cl 5.3.1.1(Construction of whole footwear)	-	53900	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	53900	-
Cl 5.3.2.1(Toe protection - general)	-	53900	-
Cl 5.3.2.2(Internal length)	-	53900	-
Cl 5.3.2.3(Width of toecap flange)	-	53900	-
Cl 5.3.2.4.1(Corrosion resistance of Class I footwear and hybrid mounted footwear)	-	53900	-
Cl 5.3.2.4.2(Corrosion resistance of Class II and hybrid moulded footwear)	-	53900	-
Cl 5.3.2.5(Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-	53900	-
Cl 5.3.2.6(Impact resistance)	-	53900	-
Cl 5.3.2.7(Compression resistance)	-	53900	-
Cl 5.3.3(Leak proofness)	-	53900	-
Cl 5.3.4("Specific ergonomic features ")	-	53900	-
Cl 5.3.5.2, Table 7(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	53900	-
Cl 5.3.6, Table no 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	53900	-
Cl 5.3.6, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	53900	-
Cl 5.3.6, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	53900	-
Cl 5.3.6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	53900	-
Cl 5.3.6, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	53900	-
Cl 5.3.6, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	53900	-
Cl 5.3.6, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	53900	-
Cl 5.3.6, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	53900	-
Cl 5.3.6, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	53900	-
Cl 5.3.6, Table no 1 of IS 17011 (x)(pH)	-	53900	-
Cl 5.3.6, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	53900	-
Cl 5.3.6, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	53900	-
Cl 5.3.7(Seam strength)	-	53900	-
Cl 5.3.8(Lead Content ( National Annex A))	-	53900	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	53900	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	53900	-
Cl 5.4.2(Thickness)	-	53900	-
Cl 5.4.3(Tear strength)	-	53900	-
Cl 5.4.4, Table 11(Tensile properties- Tensile strength)	-	53900	-
Cl 5.4.4, Table 11(Tensile properties- Breaking Force)	-	53900	-
Cl 5.4.4, Table 11(Tensile properties-Modulus at 100 % elongation)	-	53900	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	53900	-
Cl 5.4.5(Flexing resistance)	-	53900	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	53900	-
Cl 5.4.7(Resistance to hydrolysis)	-	53900	-
Cl 5.5.2(Lining- Tear strength)	-	53900	-
Cl 5.5.3(Lining- Abrasion resistance)	-	53900	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	53900	-
Cl 5.6.2, Table 14(Tear strength of tongue)	-	53900	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	53900	-
Cl 5.7.2(Water permeability of insock)	-	53900	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	53900	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	53900	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	53900	-
Cl 5.8.2.1, Table 15(Thickness of Outsole)	-	53900	-
Cl 5.8.2.2(Cleated area)	-	53900	-
Cl 5.8.2.3(Cleat height)	-	53900	-
Cl 5.8.3(Outsole- Tear strength)	-	53900	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	53900	-
Cl 5.8.5(Outsole-Flexing resistance)	-	53900	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	53900	-
Cl 5.8.7(Interlayer bond strength)	-	53900	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	53900	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	53900	-
Personal protective equipment: Part 2 safety footwear(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	53900	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	53900	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	53900	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	53900	-
Cl 6.2.1.4.2.1(Corrosion resistance of perforation resistant metallic insert for Class I footwear and hybrid mounted footwear)	-	53900	-
Cl 6.2.1.4.2.2(Corrosion resistance of perforation resistant metallic insert for Class II footwear and hybrid moulded footwear)	-	53900	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	53900	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	53900	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	53900	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	53900	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	53900	-
Cl 6.2.4(Energy absorption of seat region)	-	53900	-
Cl 6.2.5(Water resistance)	-	53900	-
Cl 6.2.6.1(Metatarsal protection - Construction)	-	53900	-
Cl 6.2.6.2("Metatarsal protection-Impact resistance of metatarsal protective device ")	-	53900	-
Cl 6.2.7(Ankle protection)	-	53900	-
Cl 6.2.8.2(Cut resistance footwear- design)	-	53900	-
Cl 6.2.8.2(Dimensions and construction of protective area of Cut resistance footwear)	-	53900	-
Cl 6.2.8.3(Resistance to cutting)	-	53900	-
Cl 6.2.9(Scuff cap)	-	53900	-
Cl 6.2.10 , Table 19("Slip resistance on ceramic tile floor with glycerine ")	-	53900	-
Cl 6.3(Upper — Water penetration and absorption)	-	53900	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	53900	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	53900	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	53900	-
Cl 6.4.3.2(Design of Ladder grip)	-	53900	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	53900	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	53900	-
Cl 7, Table 20("Marking ")	-	53900	-
Cl 5.2(Design)	-	0	-
Cl 5.2.2, Table 4(" Height of upper ")	-	0	-
Cl 5.2.3(Heel area)	-	0	-
Cl 5.3.1.1(Construction of whole footwear)	-	0	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	0	-
Cl 5.3.2.1(Toe protection - general)	-	0	-
Cl 5.3.2.2(Internal length)	-	0	-
Cl 5.3.2.3(Width of toecap flange)	-	0	-
Cl 5.3.2.4.1(Corrosion resistance of Class I footwear and hybrid mounted footwear)	-	0	-
Cl 5.3.2.4.2(Corrosion resistance of Class II and hybrid moulded footwear)	-	0	-
Cl 5.3.2.5(Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-	0	-
Cl 5.3.2.6(Impact resistance)	-	0	-
Cl 5.3.2.7(Compression resistance)	-	0	-
Cl 5.3.3(Leak proofness)	-	0	-
Cl 5.3.4("Specific ergonomic features ")	-	0	-
Cl 5.3.5.2, Table 7(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	0	-
Cl 5.3.6, Table no 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	0	-
Cl 5.3.6, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl 5.3.6, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl 5.3.6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	0	-
Cl 5.3.6, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	0	-
Cl 5.3.6, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	-
Cl 5.3.6, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	0	-
Cl 5.3.6, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	0	-
Cl 5.3.6, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	-
Cl 5.3.6, Table no 1 of IS 17011 (x)(pH)	-	0	-
Cl 5.3.6, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	0	-
Cl 5.3.6, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	0	-
Cl 5.3.7(Seam strength)	-	0	-
Cl 5.3.8(Lead Content ( National Annex A))	-	0	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	0	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	0	-
Cl 5.4.2(Thickness)	-	0	-
Cl 5.4.3(Tear strength)	-	0	-
Cl 5.4.4, Table 11(Tensile properties- Tensile strength)	-	0	-
Cl 5.4.4, Table 11(Tensile properties- Breaking Force)	-	0	-
Cl 5.4.4, Table 11(Tensile properties-Modulus at 100 % elongation)	-	0	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	0	-
Cl 5.4.5(Flexing resistance)	-	0	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	0	-
Cl 5.4.7(Resistance to hydrolysis)	-	0	-
Cl 5.5.2(Lining- Tear strength)	-	0	-
Cl 5.5.3(Lining- Abrasion resistance)	-	0	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	0	-
Cl 5.6.2, Table 14(Tear strength of tongue)	-	0	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	0	-
Cl 5.7.2(Water permeability of insock)	-	0	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	0	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	0	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	0	-
Cl 5.8.2.1, Table 15(Thickness of Outsole)	-	0	-
Cl 5.8.2.2(Cleated area)	-	0	-
Cl 5.8.2.3(Cleat height)	-	0	-
Cl 5.8.3(Outsole- Tear strength)	-	0	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	0	-
Cl 5.8.5(Outsole-Flexing resistance)	-	0	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	0	-
Cl 5.8.7(Interlayer bond strength)	-	0	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	0	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	0	-
Personal protective equipment: Part 2 safety footwear(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	0	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	0	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	0	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	0	-
Cl 6.2.1.4.2.1(Corrosion resistance of perforation resistant metallic insert for Class I footwear and hybrid mounted footwear)	-	0	-
Cl 6.2.1.4.2.2(Corrosion resistance of perforation resistant metallic insert for Class II footwear and hybrid moulded footwear)	-	0	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	0	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	0	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	0	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	0	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	0	-
Cl 6.2.4(Energy absorption of seat region)	-	0	-
Cl 6.2.5(Water resistance)	-	0	-
Cl 6.2.6.1(Metatarsal protection - Construction)	-	0	-
Cl 6.2.6.2("Metatarsal protection-Impact resistance of metatarsal protective device ")	-	0	-
Cl 6.2.7(Ankle protection)	-	0	-
Cl 6.2.8.2(Cut resistance footwear- design)	-	0	-
Cl 6.2.8.2(Dimensions and construction of protective area of Cut resistance footwear)	-	0	-
Cl 6.2.8.3(Resistance to cutting)	-	0	-
Cl 6.2.9(Scuff cap)	-	0	-
Cl 6.2.10 , Table 19("Slip resistance on ceramic tile floor with glycerine ")	-	0	-
Cl 6.3(Upper — Water penetration and absorption)	-	0	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	0	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	0	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	0	-
Cl 6.4.3.2(Design of Ladder grip)	-	0	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	0	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	0	-
Cl 7, Table 20("Marking ")	-	0	-
Cl 5.2(Design)	-	-	-
Cl 5.2.2, Table 4(" Height of upper ")	-	-	-
Cl 5.2.3(Heel area)	-	-	-
Cl 5.3.1.1(Construction of whole footwear)	-	-	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	-	-
Cl 5.3.2.1(Toe protection - general)	-	-	-
Cl 5.3.2.2(Internal length)	-	-	-
Cl 5.3.2.3(Width of toecap flange)	-	-	-
Cl 5.3.2.4.1(Corrosion resistance of Class I footwear and hybrid mounted footwear)	-	-	-
Cl 5.3.2.4.2(Corrosion resistance of Class II and hybrid moulded footwear)	-	-	-
Cl 5.3.2.5(Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-	-	-
Cl 5.3.2.6(Impact resistance)	-	-	-
Cl 5.3.2.7(Compression resistance)	-	-	-
Cl 5.3.3(Leak proofness)	-	-	-
Cl 5.3.4("Specific ergonomic features ")	-	-	-
Cl 5.3.5.2, Table 7(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	-	-
Cl 5.3.6, Table no 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	-	-
Cl 5.3.6, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (x)(pH)	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	-	-
Cl 5.3.7(Seam strength)	-	-	-
Cl 5.3.8(Lead Content ( National Annex A))	-	-	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	-	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	-	-
Cl 5.4.2(Thickness)	-	-	-
Cl 5.4.3(Tear strength)	-	-	-
Cl 5.4.4, Table 11(Tensile properties- Tensile strength)	-	-	-
Cl 5.4.4, Table 11(Tensile properties- Breaking Force)	-	-	-
Cl 5.4.4, Table 11(Tensile properties-Modulus at 100 % elongation)	-	-	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	-	-
Cl 5.4.5(Flexing resistance)	-	-	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	-	-
Cl 5.4.7(Resistance to hydrolysis)	-	-	-
Cl 5.5.2(Lining- Tear strength)	-	-	-
Cl 5.5.3(Lining- Abrasion resistance)	-	-	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	-	-
Cl 5.6.2, Table 14(Tear strength of tongue)	-	-	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	-	-
Cl 5.7.2(Water permeability of insock)	-	-	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	-	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	-	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	-	-
Cl 5.8.2.1, Table 15(Thickness of Outsole)	-	-	-
Cl 5.8.2.2(Cleated area)	-	-	-
Cl 5.8.2.3(Cleat height)	-	-	-
Cl 5.8.3(Outsole- Tear strength)	-	-	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	-	-
Cl 5.8.5(Outsole-Flexing resistance)	-	-	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	-	-
Cl 5.8.7(Interlayer bond strength)	-	-	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	-	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	-	-
Personal protective equipment: Part 2 safety footwear(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	-	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	-	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	-	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	-	-
Cl 6.2.1.4.2.1(Corrosion resistance of perforation resistant metallic insert for Class I footwear and hybrid mounted footwear)	-	-	-
Cl 6.2.1.4.2.2(Corrosion resistance of perforation resistant metallic insert for Class II footwear and hybrid moulded footwear)	-	-	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	-	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	-	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	-	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	-	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	-	-
Cl 6.2.4(Energy absorption of seat region)	-	-	-
Cl 6.2.5(Water resistance)	-	-	-
Cl 6.2.6.1(Metatarsal protection - Construction)	-	-	-
Cl 6.2.6.2("Metatarsal protection-Impact resistance of metatarsal protective device ")	-	-	-
Cl 6.2.7(Ankle protection)	-	-	-
Cl 6.2.8.2(Cut resistance footwear- design)	-	-	-
Cl 6.2.8.2(Dimensions and construction of protective area of Cut resistance footwear)	-	-	-
Cl 6.2.8.3(Resistance to cutting)	-	-	-
Cl 6.2.9(Scuff cap)	-	-	-
Cl 6.2.10 , Table 19("Slip resistance on ceramic tile floor with glycerine ")	-	-	-
Cl 6.3(Upper — Water penetration and absorption)	-	-	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	-	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	-	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	-	-
Cl 6.4.3.2(Design of Ladder grip)	-	-	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	-	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	-	-
Cl 7, Table 20("Marking ")	-	-	-

25 Feb, 2027

-
Included w.e.f 13.03.2025

4776

Alpha Test House Private Limited, Delhi

8131026

IS 16614 : Part 1 (2018)

Double- Capped LED Linear Lamps Part1 Safety Specification

61000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General)	-	1000	-
5(Marking)	-	1000	-
6.1(Interchangeability)	-	1000	-
6.2(Mass)	-	1000	-
6.3(Dimensions)	-	1000	-
6.3(Dimensions)	-	1000	-
6.4(Temperature)	-	5000	-
6.5("Safety Due to Wrong Starter-Lamp Combination")	-	5000	-
7(PIN-SAFETY DURING INSERTION)	-	5000	-
8("PROTECTION AGAINST ACCIDENTAL CONTACT WITH LIVE PARTS")	-	5000	-
9(Mechanical requirements for Caps)	-	5000	-
10(Cap Temperature Rise)	-	5000	-
11(Resistance to Heat)	-	5000	-
12(RESISTANCE TO FLAME AND IGNITION)	-	5000	-
13(FAULT CONDITIONS)	-	5000	-
14(CREEPAGE DISTANCES AND CLEARANCES)	-	5000	-
15("LAMPS WITH PROTECTION AGAINST DUST AND MOISTURE ")	-	5000	-
4(General)	-	1000	-
5(Marking)	-	1000	-
6.1(Interchangeability)	-	1000	-
6.2(Mass)	-	1000	-
6.3(Dimensions)	-	1000	-
6.3(Dimensions)	-	1000	-
6.4(Temperature)	-	5000	-
6.5("Safety Due to Wrong Starter-Lamp Combination")	-	5000	-
7(PIN-SAFETY DURING INSERTION)	-	5000	-
8("PROTECTION AGAINST ACCIDENTAL CONTACT WITH LIVE PARTS")	-	5000	-
9(Mechanical requirements for Caps)	-	5000	-
10(Cap Temperature Rise)	-	5000	-
11(Resistance to Heat)	-	5000	-
12(RESISTANCE TO FLAME AND IGNITION)	-	5000	-
13(FAULT CONDITIONS)	-	5000	-
14(CREEPAGE DISTANCES AND CLEARANCES)	-	5000	-
15("LAMPS WITH PROTECTION AGAINST DUST AND MOISTURE ")	-	5000	-
4(General)	-	1000	-
5(Marking)	-	1000	-
6.1(Interchangeability)	-	1000	-
6.2(Mass)	-	1000	-
6.3(Dimensions)	-	1000	-
6.3(Dimensions)	-	1000	-
6.4(Temperature)	-	5000	-
6.5("Safety Due to Wrong Starter-Lamp Combination")	-	5000	-
7(PIN-SAFETY DURING INSERTION)	-	5000	-
8("PROTECTION AGAINST ACCIDENTAL CONTACT WITH LIVE PARTS")	-	5000	-
9(Mechanical requirements for Caps)	-	5000	-
10(Cap Temperature Rise)	-	5000	-
11(Resistance to Heat)	-	5000	-
12(RESISTANCE TO FLAME AND IGNITION)	-	5000	-
13(FAULT CONDITIONS)	-	5000	-
14(CREEPAGE DISTANCES AND CLEARANCES)	-	5000	-
15("LAMPS WITH PROTECTION AGAINST DUST AND MOISTURE ")	-	5000	-

17 May, 2027

-
Included w.e.f 04.08.2025

4777

PLANET ANALYSIS PRIVATE LIMITED, KANPUR

9125906

IS 15298 : Part 3 (2024)

Personal Protective Equipment Part 3 Protective Footwear (ISO 20346 : 2021, MOD) (Third Revision)

42000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.2(Design)	-	300	5% DISCOUNT to BIS Sample only Basic Test Charges Rs. 42000.00 (Mechanical Test-Rs 15000, Chemical Test-Rs 27000) Additional Parameter Rs. 7500.00 as whole & Individual additional parameter as per clausewise RATE
Cl 5.2.2(" Height of upper ")	-	200	5% DISCOUNT to BIS Sample only Basic Test Charges Rs. 42000.00 (Mechanical Test-Rs 15000, Chemical Test Rs 27000) Additional Parameter Rs. 7500.00 as whole & Individual additional parameter as per clausewise RATE
Cl 5.2.3(Heel area)	-	200	-
Cl 5.3.1.1(Construction of whole footwear)	-	300	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	600	-
Cl 5.3.2.1(Toe protection - general)	-	300	-
Cl 5.3.2.2(Internal length)	-	200	-
Cl 5.3.2.3(Width of toecap flange)	-	200	-
Cl 5.3.2.4.1(Corrosion resistance of Class I footwear and hybrid mounted footwear)	-	500	-
Cl 5.3.2.4.2(Corrosion resistance of Class II and hybrid moulded footwear)	-	500	-
Cl 5.3.2.5(Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-	500	-
Cl 5.3.2.6(Impact resistance)	-	600	-
Cl 5.3.2.7(Compression resistance)	-	600	-
Cl 5.3.3(Leak proofness)	-	500	-
Cl 5.3.4("Specific ergonomic features ")	-	500	-
Cl 5.3.5.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	1500	-
Cl 5.3.6, Table no 1 of IS 17011 (i)(Allergenic and carcinogenic disperse dyes)	-	2500	-
Cl 5.3.6, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl 5.3.6, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl 5.3.6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	2000	-
Cl 5.3.6, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	2500	-
Cl 5.3.6, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	3000	-
Cl 5.3.6, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	3000	-
Cl 5.3.6, Table no 1 of IS 17011 (x)(pH)	-	500	-
Cl 5.3.6, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	4000	-
Cl 5.3.6, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	1500	-
Cl 5.3.7(Seam strength)	-	500	-
Cl 5.3.8(Lead Content ( National Annex A))	-	1000	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	300	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	300	-
Cl 5.4.2(Thickness)	-	300	-
Cl 5.4.3(Tear strength)	-	500	-
Cl 5.4.4, Table 11(Tensile properties- Tensile strength)	-	500	-
Cl 5.4.4, Table 11(Tensile properties- Breaking Force)	-	500	-
Cl 5.4.4, Table 11(Tensile properties-Modulus at 100 % elongation)	-	500	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	250	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	750	Cl 5.4.5 (Flexing resistance) 750
Cl 5.4.6(Water vapour permeability and coefficient)	-	800	-
Cl 5.4.7(Resistance to hydrolysis)	-	2000	-
Cl 5.5.2(Lining- Tear strength)	-	500	-
Cl 5.5.3(Lining- Abrasion resistance)	-	1000	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	800	-
Cl 5.6.2(Tear strength of tongue)	-	500	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	300	-
Cl 5.7.2(Water permeability of insock)	-	500	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	6000	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	1000	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	1000	-
Cl 5.8.2.1(Thickness of Outsole)	-	300	-
Cl 5.8.2.2(Cleated area)	-	300	-
Cl 5.8.2.3(Cleat height)	-	300	-
Cl 5.8.3(Outsole- Tear strength)	-	500	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	800	-
Cl 5.8.5(Outsole-Flexing resistance)	-	800	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	1500	-
Cl 5.8.7(Interlayer bond strength)	-	600	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	500	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	500	-
Cl 6.2.1.1.4(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	500	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	300	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	300	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	1000	-
Cl 6.2.1.4.2.1(Corrosion resistance of perforation resistant metallic insert for Class I footwear and hybrid mounted footwear)	-	500	-
Cl 6.2.1.4.2.2(Corrosion resistance of perforation resistant metallic insert for Class II footwear and hybrid moulded footwear)	-	500	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	500	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	1000	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	1000	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	500	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	800	-
Cl 6.2.4(Energy absorption of seat region)	-	500	-
Cl 6.2.5(Water resistance)	-	500	-
Cl 6.2.6.1(Metatarsal protection - Construction)	-	300	-
Cl 6.2.6.2("Metatarsal protection-Impact resistance of metatarsal protective device ")	-	500	-
Cl 6.2.7(Ankle protection)	-	500	-
Cl 6.2.8.2(Cut resistance footwear- design)	-	500	-
Cl 6.2.8.2(Dimensions and construction of protective area of Cut resistance footwear)	-	300	-
Cl 6.2.8.3(Resistance to cutting)	-	500	-
Cl 6.2.9(Scuff cap)	-	600	-
Cl 6.2.10("Slip resistance on ceramic tile floor with glycerine ")	-	1500	-
Cl 6.3(Upper — Water penetration and absorption)	-	800	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	500	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	600	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	800	-
Cl 6.4.3.2(Design of Ladder grip)	-	200	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	300	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	300	-
Cl 7("Marking ")	-	0	-
Cl 7("Marking ")	-	0	5% DISCOUNT to BIS Sample only Basic Test Charges Rs. 42000.00 (Mechanical Test-Rs 15000, Chemical Test-Rs 27000) Additional Parameter Rs. 7500.00 as whole & Individual additional parameter as per clausewise RATE

20 Jan, 2028

-
-

4778

SIIR, Delhi Shriram Institute For Industrial Research

8102006

IS 12931 (2024)

Atrazine wettable powder WP - Specification First Revision

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Description - IS 12931:2024)	-	1000	30 % discount
3.3, Table 1 (i)(Atrazine Content - IS 12932:2024)	-	5000	30 % discount
3.3, Table 1 (ii)(Material passing through 75 micron IS sieve - IS 6940:1982)	-	1000	30 % discount
3.3, Table 1 (iii)(Suspensibility - IS 6940:1982)	-	1000	30 % discount
3.3, Table 1 (iv)(Acidity (as H2SO4) - IS 6940:1982)	-	500	30 % discount
3.3, Table 1 (iv)(Alkalinity (as NaOH) - IS 6940:1982)	-	500	30 % discount
3.3, Table 1 (v)(Wettability - IS 6940:1982)	-	1000	30 % discount

31 Dec, 2026

-
Included w.e.f 03.03.2025

4779

BIS, Eastern Regional Laboratory (ERL)

None

IS 5145 (1969)

Specification for walking sticks

Please see remarks. View breakup
Rs.525.00 excluding for Aluminium under `Material'.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-2.1 (Wood)	-
Cl.2.2 (ALUMINIUM)	-
Cl.4 (MANUFACTURE)	-
Cl.5 (WORKMANSHIP AND FINISH)	-
Cl.6.1 (STRENGTH TEST)	-
Cl.7 (MARKING)	-
Cl.8 (PACKING)	-

-
Mech- Except Material (Cl 2)

4780

SWASTIK ELECTRONICS TESTING CENTRE (OPC) PVT. LTD., GHAZIABAD

8163826

IS 302 : Part 2 : Sec 25 (2014)

Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 25 Microwave ovens

55000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	1000	-
7(Marking and instructions)	-	1000	-
8(Protection against live parts)	-	1500	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	0	-
10(POWER INPUT AND CURRENT)	-	2500	-
11(HEATING)	-	2500	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	2500	-
14(IMPULSE VOLTAGE TEST)	-	2500	-
15(HUMIDITY TREATMENT TEST)	-	3000	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	3000	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	2500	-
18(ENDURANCE)	-	2500	-
19(ABNORMAL OPERATION)	-	2500	-
Cl-19.11.4.1(Electrostatic discharge)	-	0	-
Cl-19.11.4.2(Radiated Fields)	-	0	-
Cl-19.11.4.3(Fast transient bursts)	-	0	-
Cl-19.11.4.4(Surge Immunity test)	-	0	-
Cl-19.11.4.5(Immunity to conducted discharge)	-	0	-
Cl-19.11.4.6(Voltage dips and interruptions)	-	0	-
Cl-19.11.4.7(Harmonics)	-	0	-
20(STABILITY AND MECHANICAL HAZARDS)	-	2000	-
21(MECHANICAL STRENGTH)	-	1000	-
22(CONSTRUCTION)	-	2000	-
22.32(Oxygen bomb for rubber material)	-	0	-
22.46(Software)	-	0	-
23(INTERNAL WIRING)	-	2000	-
24(COMPONENTS)	-	2500	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	2500	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	2500	-
27(PROVISION FOR EARTHING)	-	2500	-
28(SCREWS AND CONNECTIONS)	-	2000	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	3000	-
30(RESISTANCE TO HEAT AND FIRE)	-	2000	-
31(RESISTANCE TO RUSTING)	-	2000	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	2000	-
6.0(Classification)	-	0	-
7(Marking and instructions)	-	0	-
8(Protection against live parts)	-	0	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	0	-
10(POWER INPUT AND CURRENT)	-	0	-
11(HEATING)	-	0	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	0	-
14(IMPULSE VOLTAGE TEST)	-	0	-
15(HUMIDITY TREATMENT TEST)	-	0	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	0	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	0	-
18(ENDURANCE)	-	0	-
19(ABNORMAL OPERATION)	-	0	-
Cl-19.11.4.1(Electrostatic discharge)	-	0	-
Cl-19.11.4.2(Radiated Fields)	-	0	-
Cl-19.11.4.3(Fast transient bursts)	-	0	-
Cl-19.11.4.4(Surge Immunity test)	-	0	-
Cl-19.11.4.5(Immunity to conducted discharge)	-	0	-
Cl-19.11.4.6(Voltage dips and interruptions)	-	0	-
Cl-19.11.4.7(Harmonics)	-	0	-
20(STABILITY AND MECHANICAL HAZARDS)	-	0	-
21(MECHANICAL STRENGTH)	-	0	-
22(CONSTRUCTION)	-	0	-
22.32(Oxygen bomb for rubber material)	-	0	-
22.46(Software)	-	0	-
23(INTERNAL WIRING)	-	0	-
24(COMPONENTS)	-	0	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	0	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
27(PROVISION FOR EARTHING)	-	0	-
28(SCREWS AND CONNECTIONS)	-	0	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	0	-
30(RESISTANCE TO HEAT AND FIRE)	-	0	-
31(RESISTANCE TO RUSTING)	-	0	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	0	-

15 May, 2028

-
Included w.e.f.24.04.2025 Exclusion Cl.19.11.4.1 to Cl.19.11.4.7(EMI/EMC tests (Electrostatic Discharges, Radiant Fields, Fast Transient burst, Voltage surges, Injected current, voltage dips & Interruptions, Mains signals)) Cl 22.32 (Oxygen bomb for rubber material) Cl 22.46 (Software) Cl 24 (COMPONENTS)

4781

ACCURATE TEST SOLUTIONS LLP (F21), NOIDA

8141226

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General requirement)	-	9500	-
5(General conditions for the tests)	-	9500	-
6(Classification- IS 302-1)	-	9500	-
7(Marking and instructions)	-	9500	-
8.1.1(Protection against live parts in all positions)	-	9500	-
8.1.2(Protection against live parts in openings)	-	9500	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	9500	-
8.1.4(Protection against live parts against protective impedance)	-	9500	-
8.1.5(Live parts of built-in appliances)	-	9500	-
9(Starting of motor operation test requirements and tests)	-	9500	-
10.1(Power input)	-	9500	-
10.2(Current input)	-	9500	-
11.1(General)	-	9500	-
11.2(General)	-	9500	-
11.3(Heating)	-	9500	-
11.4(Heating appliances)	-	9500	-
11.5(Motor-operated appliances)	-	9500	-
11.6(Combined appliances)	-	9500	-
11.7(Duration corresponding)	-	9500	-
11.8(Temperature rise)	-	9500	-
12(Charging of metal-ion batteries)	-	9500	-
13(Leakage current and electric strength at operating temperature)	-	9500	-
13.2(Leakage current at operating temperature)	-	9500	-
13.3(Electric Strength at operating temperature)	-	9500	-
14(Transient Over Voltages)	-	9500	-
15.0(Moisture resistance)	-	9500	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	9500	-
15.2(Spillage Test)	-	9500	-
16.1(General)	-	9500	-
16.2(Leakage Current (after Clause 15))	-	9500	-
16.3(Electric Strength (after clause 15 and 16.2))	-	9500	-
16(Leakage current and electric strength)	-	9500	-
15.2(Moisture resistance)	-	9500	-
16.0(General)	-	9500	-
17(Overload protection of transformers and associated circuits)	-	9500	-
18(Endurance)	-	9500	-
19(Abnormal Operation)	-	9500	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	9500	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	9500	-
21.1(Mechanical Strength, IS 302-1)	-	9500	-
21.2(Mechanical Strength, IS 302-1)	-	9500	-
21.3(Mechanical Strength, IS 302-1)	-	9500	-
22.1(Construction, IS 302-1)	-	9500	-
22.5(Construction)	-	9500	-
22.6(Construction, IS 302-1)	-	9500	-
22.11(Construction, IS 302-1)	-	9500	-
22.16(Construction)	-	9500	-
22.32(Construction, IS 302-1)	-	9500	-
22.42(Construction)	-	9500	-
23.1(Internal Wiring, IS 302-1)	-	9500	-
23.3(Internal Wiring, IS 302-1)	-	9500	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	9500	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	9500	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	9500	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	9500	-
26(Terminals for external conductors)	-	9500	-
26.5(Terminals for external conductors)	-	9500	-
27.1(Provision for Earthing, IS 302-1)	-	9500	-
27.5(Provision for Earthing, IS 302-1)	-	9500	-
28(Screw test and connections)	-	9500	-
28.1(Screws and connections)	-	9500	-
29(clearance, creepage distances and solid insulation)	-	9500	-
30.1(Ball pressure test)	-	9500	-
30.2(Glow Wire Test)	-	9500	-
30.2(Needle Flame Test)	-	9500	-
31(Resistance to Rusting)	-	9500	-
32.1(Radiation Toxicity and Similar Hazards)	-	9500	-
22.2(Construction, IS 302-1)	-	9500	-
22.3(Construction, IS 302-1)	-	9500	-
B.22.4(Construction, IS 302-1)	-	9500	-
B.22.5(Construction, IS 302-1)	-	9500	-
A.2(Earth continuity test)	-	9500	-
Annex C(Ageing test on motors)	-	9500	-
Annex D(Thermal motor protectors)	-	9500	-
15.3(Humidity Test)	-	9500	-
19.17(Abnormal Operation, IS 302-1)	-	9500	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	9500	-
18(Endurance)	-	9500	-
17(Over Load Protection of Transformers and associated circuits)	-	9500	-
4(General requirement)	-	9500	-
5(General conditions for the tests)	-	9500	-
6(Classification- IS 302-1)	-	9500	-
7(Marking and instructions)	-	9500	-
8.1.1(Protection against live parts in all positions)	-	9500	-
8.1.2(Protection against live parts in openings)	-	9500	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	9500	-
8.1.4(Protection against live parts against protective impedance)	-	9500	-
8.1.5(Live parts of built-in appliances)	-	9500	-
9(Starting of motor operation test requirements and tests)	-	9500	-
10.1(Power input)	-	9500	-
10.2(Current input)	-	9500	-
11.1(General)	-	9500	-
11.2(General)	-	9500	-
11.3(Heating)	-	9500	-
11.4(Heating appliances)	-	9500	-
11.5(Motor-operated appliances)	-	9500	-
11.6(Combined appliances)	-	9500	-
11.7(Duration corresponding)	-	9500	-
11.8(Temperature rise)	-	9500	-
12(Charging of metal-ion batteries)	-	9500	-
13(Leakage current and electric strength at operating temperature)	-	9500	-
13.2(Leakage current at operating temperature)	-	9500	-
13.3(Electric Strength at operating temperature)	-	9500	-
14(Transient Over Voltages)	-	9500	-
15.0(Moisture resistance)	-	9500	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	9500	-
15.2(Spillage Test)	-	9500	-
16.1(General)	-	9500	-
16.2(Leakage Current (after Clause 15))	-	9500	-
16.3(Electric Strength (after clause 15 and 16.2))	-	9500	-
16(Leakage current and electric strength)	-	9500	-
15.2(Moisture resistance)	-	9500	-
16.0(General)	-	9500	-
17(Overload protection of transformers and associated circuits)	-	9500	-
18(Endurance)	-	9500	-
19(Abnormal Operation)	-	9500	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	9500	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	9500	-
21.1(Mechanical Strength, IS 302-1)	-	9500	-
21.2(Mechanical Strength, IS 302-1)	-	9500	-
21.3(Mechanical Strength, IS 302-1)	-	9500	-
22.1(Construction, IS 302-1)	-	9500	-
22.5(Construction)	-	9500	-
22.6(Construction, IS 302-1)	-	9500	-
22.11(Construction, IS 302-1)	-	9500	-
22.16(Construction)	-	9500	-
22.32(Construction, IS 302-1)	-	9500	-
22.42(Construction)	-	9500	-
23.1(Internal Wiring, IS 302-1)	-	9500	-
23.3(Internal Wiring, IS 302-1)	-	9500	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	9500	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	9500	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	9500	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	9500	-
26(Terminals for external conductors)	-	9500	-
26.5(Terminals for external conductors)	-	9500	-
27.1(Provision for Earthing, IS 302-1)	-	9500	-
27.5(Provision for Earthing, IS 302-1)	-	9500	-
28(Screw test and connections)	-	9500	-
28.1(Screws and connections)	-	9500	-
29(clearance, creepage distances and solid insulation)	-	9500	-
30.1(Ball pressure test)	-	9500	-
30.2(Glow Wire Test)	-	9500	-
30.2(Needle Flame Test)	-	9500	-
31(Resistance to Rusting)	-	9500	-
32.1(Radiation Toxicity and Similar Hazards)	-	9500	-
22.2(Construction, IS 302-1)	-	9500	-
22.3(Construction, IS 302-1)	-	9500	-
B.22.4(Construction, IS 302-1)	-	9500	-
B.22.5(Construction, IS 302-1)	-	9500	-
A.2(Earth continuity test)	-	9500	-
Annex C(Ageing test on motors)	-	9500	-
Annex D(Thermal motor protectors)	-	9500	-
15.3(Humidity Test)	-	9500	-
19.17(Abnormal Operation, IS 302-1)	-	9500	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	9500	-
18(Endurance)	-	9500	-
17(Over Load Protection of Transformers and associated circuits)	-	9500	-

04 Jul, 2027

-
Included w.e.f.17.03.2025 Exclusion Cl 19.11.4.1 to Cl 19.11.4.7 (EMI/EMC) Cl 24 (Components) "Domestic Electric Clothes Washing Machines (For testing charges please refer part 2 standard in LIMS)"

4782

Alpha Test House Private Limited, Delhi

8131026

IS/IEC 61683 (1999)

Photovoltaic systems - Power conditioners - Procedure for measuring efficiency

115000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Efficiency calculations)	-	1000	-
6(Efficiency test circuits)	-	50000	-
7(Loss measurement)	-	50000	-
Annex A(Power conditioner description)	-	1000	-
Annex B(Power efficiency and conversion factor)	-	1000	-
Annex C(Weighted average energy efficiency)	-	1000	-
Annex D(Derivation of efficiency tolerance in Table 2)	-	1000	-
4(Efficiency measurement conditions)	-	1000	-
4.1(DC power source for testing)	-	1000	-
4.2(Temperature)	-	1000	-
4.3(Output voltage and frequency)	-	1000	-
4.4(Input voltage)	-	1000	-
4.5(Ripple and distortion)	-	1000	-
4.6(Resistive loads/utility grid)	-	1000	-
4.7(Reactive loads)	-	1000	-
4.8(Resistive plus non-linear loads)	-	1000	-
4.9(Complex loads)	-	1000	-

17 May, 2027

-
Included w.e.f.17.03.2025

4783

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS 14286 : Part 1 : Sec 1 (2023)

Terrestrial photovoltaic PV modules Design qualification and type approval Part 1-1: Special requirements for testing of crystalline silicon photovoltaic PV modules Third Revision

1450000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-8(Major visual defects)	-	10000	-
Cl-11.1(Visual inspection)	-	10000	-
Cl-11.2(Maximum power determination)	-	200000	-
Cl-11.3(Insulation test)	-	200000	-
Cl-11.4(Measurement of temperature coefficients)	-	200000	-
Cl-11.5(Measurement of nominal module operating temperature)	-	10000	-
Cl-11.6(Performance at STC)	-	200000	-
Cl-11.7(Performance at low irradiance)	-	100000	-
Cl-11.8(Outdoor exposure test)	-	100000	-
Cl-11.9(Hot-spot endurance test)	-	100000	-
Cl-11.10(UV preconditioning test)	-	100000	-
Cl-11.11(Thermal cycling test)	-	200000	-
Cl-11.12(Humidity-freeze test)	-	200000	-
Cl-11.13(Damp heat test)	-	100000	-
Cl-11.14(Robustness of terminations test)	-	100000	-
Cl-11.15(Wet leakage current tes)	-	100000	-
Cl-11.16(Static mechanical load test)	-	100000	-
Cl-11.17(Hail test)	-	100000	-
Cl-11.18(Bypass diode thermal test)	-	100000	-
Cl-11.19(Stabilization)	-	100000	-
5(Marking and documentation)	-	100000	-
11.20(Cyclic (dynamic) mechanical load test (MQT 20))	-	100000	-
11.21(Potential induced degradation test (MQT 21))	-	100000	-
11.22(Bending test (MQT 22))	-	100000	-

26 Sep, 2027

-
Included w.e.f 04.03.2025

4784

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 14756 (2024)

Stainless Steel Utensils - Specification (THIRD REVISION)

6800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 3.1(Material used for manufacturing utensils)	-	1300	-
Cl 3.2(Material used for composite bottom)	-	1300	-
Cl 3.3(Material used for body of utensil of 3-ply construction)	-	1300	-
Cl 3.4(Material used for stainless steel lid)	-	1300	-
Cl 3.5(Material used for tempered glass lid)	-	1300	-
Cl 3.5(Material used for stainless steel rim)	-	1300	-
Cl 4.2 & Table 1(Minimum Sheet Thickness for Body of Utensil)	-	300	-
Cl 4.2 & Table 2(Minimum Sheet Thickness for Lid of Utensil)	-	300	-
Cl 4.2(Thickness of the finished utensil)	-	300	-
Cl 4.3(Classification)	-	300	-
Cl 4.4 (i)(Thickness of Aluminium disc/core)	-	300	-
Cl 4.4 (ii)(Thickness of Protector/cowl)	-	300	-
Cl 4.5(Minimum sheet thickness (3-ply utensil))	-	300	-
Cl 4.5(Thickness of finished utensil (3-ply utensil))	-	300	-
Cl 5.1(Manufacturing defect & visual appearance)	-	100	-
CL 5.2(Accessibility for cleaning)	-	100	-
Cl 5.3(Joining of handles to the utensils)	-	100	-
Cl 5.4(Requirement for handles)	-	100	-
Cl 5.5(Welding (Finish))	-	100	-
Cl 5.6(Finish of 3-ply utensil)	-	100	-
Cl 5.7(Requirement for coating)	-	100	-
Cl 5.8(Coating thickness test)	-	300	-
Cl 5.8(Coating adhesion test)	-	300	-
Cl 5.8.1(Thermal shock test (Coating))	-	500	-
Cl 6.1(Staining Test (Type Test - Frequency Once in a Year))	-	400	-
Cl 6.2(Mechanical Shock Test (for Cladded Utensils Only))	-	500	-
Cl 6.3(Thermal Shock Test (for Cladded Utensils Only))	-	500	-
Cl 6.4(Dry Heat Test (for Cladded Utensils Only))	-	500	-
Cl 6.5(Coating Thickness Test (for Copper Deposit))	-	500	-
Cl 6.6(Thermal shock test (3-ply construction utensil body))	-	500	-
Cl 6.7(Nominal Capacity Test)	-	300	-
Cl 8(Marking)	-	0	-
3.1(a) Carbon)	-	1500	-
3.1(b) Silicon)	-	1500	-
3.1(c)Manganese)	-	1500	-
3.1(d) Nickel)	-	1500	-
3.1(Chromium)	-	1500	-
3.1(Sulphu)	-	1500	-
3.1(Phosphorus)	-	1500	-
Stainless Steel Utensils - Specification (THIRD REVISION)(Copper)	-	1500	-
3.1(Nitrogen)	-	1500	-
3.2 a(a) Carbon)	-	1500	-
3.2 a(b) Silicon)	-	1500	-
68995(Manganese)	-	1500	-
3.2 a(d) Nickel)	-	1500	-
3.2 a(Chromium)	-	1500	-
3.2 a(Sulphur)	-	1500	-
3.2 a(g) Phosphorus)	-	1500	-
3.2 a(h) Copper)	-	1500	-
3.2 a(Nitrogen)	-	1500	-
3.2 b(a) Aluminium)	-	1500	-
3.2 b(b) Copper)	-	1500	-
3.2 b(c) Magnesium)	-	1500	-
3.2 b(d) Silicon)	-	1500	-
3.2 b(e) Iron)	-	1500	-
3.2 b(f) Manganese)	-	1500	-
3.2 b(d) Silicon)	-	1500	-
3.2 b(e) Iron)	-	1500	-
3.2 b(f) Manganese)	-	1500	-
3.2 b(g) Zinc)	-	1500	-
3.2 b(h) Titanium)	-	1500	-
3.2 b(i) Chromium)	-	1500	-
3.2 b(j) Cu+Si+Fe+Mn+Zn+mg)	-	1500	-
3.2 b(k) Lead)	-	1500	-
3.2 c(a) Carbon)	-	1500	-
3.2 c(b) Silicon)	-	1500	-
3.2 c(c) Manganese)	-	1500	-
3.2 c(d) Nickel)	-	1500	-
3.2 c(e) Chromium)	-	1500	-
3.2 c(f) Sulphur)	-	1500	-
3.2 c(g) Phosphorus)	-	1500	-
3.3(a) Inner layer)	-	1500	-
3.3(b) Middlelayer)	-	1500	-
3.3(c) Outerlayer)	-	1500	-
3.4(a) Carbon)	-	1500	-
3.4(b) Silicon)	-	1500	-
3.4(c) Manganese)	-	1500	-
3.4(d) Nickel)	-	1500	-
3.4(e) Chromium)	-	1500	-
3.4(f) Sulphur)	-	1500	-
3.4(g) Phosphorus)	-	1500	-
3.4(h) Copper)	-	1500	-
3.4(i) Nitrogen)	-	1500	-
3.4(Thickness stainless steel lid)	-	1500	-
3.5(If the utensils provided with tempered glass lid)	-	1500	-
4.1(Shapes and Dimensions)	-	300	-
4.2(Thickness of the sheet)	-	300	-
4.3(Classifications)	-	300	-
4.3(Core Thickness for 3-ply Construction (asper IS15960))	-	300	-
4.3(Thickness of protective layer (as per IS 15960))	-	300	-
4.4(Thickness of 3ply full body utensil)	-	300	-
5(Workmanship and finish)	-	300	-
5.4(Handles)	-	100	-
4.1 of IS 13395(Construction)	-	100	-
4.2 of IS 13395(Materials)	-	100	-
4.3 of IS 13395(Selection and Size)	-	100	-
4.4 of Is 13395(Position of Handle and Knob with Respect to Cookware)	-	100	-
4.5 of IS 13395(Attachment to Cookware)	-	100	-
5.2 of IS 13395(Bending Strength)	-	100	-
5.3 of IS 13395(Torque Strength)	-	100	-
5.4 of IS 13395(Impact Strength)	-	100	-
5.5 of IS 13395(Fatigue Resistance 15 000 cycles withstand)	-	100	-
5.6 of IS 13395(Leakage)	-	100	-
5.7 of IS 13395(Thermal Insulation)	-	100	-
5.8 of IS 13395(Heat Resistance)	-	100	-
5.9 of IS 13395(Washing Resistance)	-	100	-
5.10 of IS 13395(Burning Resistance)	-	100	-
5.5(Material comes in contact with food)	-	100	-
6.1(Staining Test)	-	400	-
6.2(Mechanical Shock Test)	-	500	-
6.3(Thermal Shock Test)	-	500	-
6.4(Dry Heat Test)	-	500	-
6.6(Heat test)	-	500	-
6.7.1(Nominal Capacity Test)	-	300	-
6.7.2(Internal diameter of utensil)	-	300	-
Cl 3.1(Material used for manufacturing utensils)	-	0	-
Cl 3.2(Material used for composite bottom)	-	0	-
Cl 3.3(Material used for body of utensil of 3-ply construction)	-	0	-
Cl 3.4(Material used for stainless steel lid)	-	0	-
Cl 3.5(Material used for tempered glass lid)	-	0	-
Cl 3.5(Material used for stainless steel rim)	-	0	-
Cl 4.2 & Table 1(Minimum Sheet Thickness for Body of Utensil)	-	0	-
Cl 4.2 & Table 2(Minimum Sheet Thickness for Lid of Utensil)	-	0	-
Cl 4.2(Thickness of the finished utensil)	-	0	-
Cl 4.3(Classification)	-	0	-
Cl 4.4 (i)(Thickness of Aluminium disc/core)	-	0	-
Cl 4.4 (ii)(Thickness of Protector/cowl)	-	0	-
Cl 4.5(Minimum sheet thickness (3-ply utensil))	-	0	-
Cl 4.5(Thickness of finished utensil (3-ply utensil))	-	0	-
Cl 5.1(Manufacturing defect & visual appearance)	-	0	-
CL 5.2(Accessibility for cleaning)	-	0	-
Cl 5.3(Joining of handles to the utensils)	-	0	-
Cl 5.4(Requirement for handles)	-	0	-
Cl 5.5(Welding (Finish))	-	0	-
Cl 5.6(Finish of 3-ply utensil)	-	0	-
Cl 5.7(Requirement for coating)	-	0	-
Cl 5.8(Coating thickness test)	-	0	-
Cl 5.8(Coating adhesion test)	-	0	-
Cl 5.8.1(Thermal shock test (Coating))	-	0	-
Cl 6.1(Staining Test (Type Test - Frequency Once in a Year))	-	0	-
Cl 6.2(Mechanical Shock Test (for Cladded Utensils Only))	-	0	-
Cl 6.3(Thermal Shock Test (for Cladded Utensils Only))	-	0	-
Cl 6.4(Dry Heat Test (for Cladded Utensils Only))	-	0	-
Cl 6.5(Coating Thickness Test (for Copper Deposit))	-	0	-
Cl 6.6(Thermal shock test (3-ply construction utensil body))	-	0	-
Cl 6.7(Nominal Capacity Test)	-	0	-
Cl 8(Marking)	-	0	-
3.1(a) Carbon)	-	0	-
3.1(b) Silicon)	-	0	-
3.1(c)Manganese)	-	0	-
3.1(d) Nickel)	-	0	-
3.1(Chromium)	-	0	-
3.1(Sulphu)	-	0	-
3.1(Phosphorus)	-	0	-
Stainless Steel Utensils - Specification (THIRD REVISION)(Copper)	-	0	-
3.1(Nitrogen)	-	0	-
3.2 a(a) Carbon)	-	0	-
3.2 a(b) Silicon)	-	0	-
68995(Manganese)	-	0	-
3.2 a(d) Nickel)	-	0	-
3.2 a(Chromium)	-	0	-
3.2 a(Sulphur)	-	0	-
3.2 a(g) Phosphorus)	-	0	-
3.2 a(h) Copper)	-	0	-
3.2 a(Nitrogen)	-	0	-
3.2 b(a) Aluminium)	-	0	-
3.2 b(b) Copper)	-	0	-
3.2 b(c) Magnesium)	-	0	-
3.2 b(d) Silicon)	-	0	-
3.2 b(e) Iron)	-	0	-
3.2 b(f) Manganese)	-	0	-
3.2 b(d) Silicon)	-	0	-
3.2 b(e) Iron)	-	0	-
3.2 b(f) Manganese)	-	0	-
3.2 b(g) Zinc)	-	0	-
3.2 b(h) Titanium)	-	0	-
3.2 b(i) Chromium)	-	0	-
3.2 b(j) Cu+Si+Fe+Mn+Zn+mg)	-	0	-
3.2 b(k) Lead)	-	0	-
3.2 c(a) Carbon)	-	0	-
3.2 c(b) Silicon)	-	0	-
3.2 c(c) Manganese)	-	0	-
3.2 c(d) Nickel)	-	0	-
3.2 c(e) Chromium)	-	0	-
3.2 c(f) Sulphur)	-	0	-
3.2 c(g) Phosphorus)	-	0	-
3.3(a) Inner layer)	-	0	-
3.3(b) Middlelayer)	-	0	-
3.3(c) Outerlayer)	-	0	-
3.4(a) Carbon)	-	0	-
3.4(b) Silicon)	-	0	-
3.4(c) Manganese)	-	0	-
3.4(d) Nickel)	-	0	-
3.4(e) Chromium)	-	0	-
3.4(f) Sulphur)	-	0	-
3.4(g) Phosphorus)	-	0	-
3.4(h) Copper)	-	0	-
3.4(i) Nitrogen)	-	0	-
3.4(Thickness stainless steel lid)	-	0	-
3.5(If the utensils provided with tempered glass lid)	-	0	-
4.1(Shapes and Dimensions)	-	0	-
4.2(Thickness of the sheet)	-	0	-
4.3(Classifications)	-	0	-
4.3(Core Thickness for 3-ply Construction (asper IS15960))	-	0	-
4.3(Thickness of protective layer (as per IS 15960))	-	0	-
4.4(Thickness of 3ply full body utensil)	-	0	-
5(Workmanship and finish)	-	0	-
5.4(Handles)	-	0	-
4.1 of IS 13395(Construction)	-	0	-
4.2 of IS 13395(Materials)	-	0	-
4.3 of IS 13395(Selection and Size)	-	0	-
4.4 of Is 13395(Position of Handle and Knob with Respect to Cookware)	-	0	-
4.5 of IS 13395(Attachment to Cookware)	-	0	-
5.2 of IS 13395(Bending Strength)	-	0	-
5.3 of IS 13395(Torque Strength)	-	0	-
5.4 of IS 13395(Impact Strength)	-	0	-
5.5 of IS 13395(Fatigue Resistance 15 000 cycles withstand)	-	0	-
5.6 of IS 13395(Leakage)	-	0	-
5.7 of IS 13395(Thermal Insulation)	-	0	-
5.8 of IS 13395(Heat Resistance)	-	0	-
5.9 of IS 13395(Washing Resistance)	-	0	-
5.10 of IS 13395(Burning Resistance)	-	0	-
5.5(Material comes in contact with food)	-	0	-
6.1(Staining Test)	-	0	-
6.2(Mechanical Shock Test)	-	0	-
6.3(Thermal Shock Test)	-	0	-
6.4(Dry Heat Test)	-	0	-
6.6(Heat test)	-	0	-
6.7.1(Nominal Capacity Test)	-	0	-
6.7.2(Internal diameter of utensil)	-	0	-
Cl 3.1(Material used for manufacturing utensils)	-	0	-
Cl 3.2(Material used for composite bottom)	-	0	-
Cl 3.3(Material used for body of utensil of 3-ply construction)	-	0	-
Cl 3.4(Material used for stainless steel lid)	-	0	-
Cl 3.5(Material used for tempered glass lid)	-	0	-
Cl 3.5(Material used for stainless steel rim)	-	0	-
Cl 4.2 & Table 1(Minimum Sheet Thickness for Body of Utensil)	-	0	-
Cl 4.2 & Table 2(Minimum Sheet Thickness for Lid of Utensil)	-	0	-
Cl 4.2(Thickness of the finished utensil)	-	0	-
Cl 4.3(Classification)	-	0	-
Cl 4.4 (i)(Thickness of Aluminium disc/core)	-	0	-
Cl 4.4 (ii)(Thickness of Protector/cowl)	-	0	-
Cl 4.5(Minimum sheet thickness (3-ply utensil))	-	0	-
Cl 4.5(Thickness of finished utensil (3-ply utensil))	-	0	-
Cl 5.1(Manufacturing defect & visual appearance)	-	0	-
CL 5.2(Accessibility for cleaning)	-	0	-
Cl 5.3(Joining of handles to the utensils)	-	0	-
Cl 5.4(Requirement for handles)	-	0	-
Cl 5.5(Welding (Finish))	-	0	-
Cl 5.6(Finish of 3-ply utensil)	-	0	-
Cl 5.7(Requirement for coating)	-	0	-
Cl 5.8(Coating thickness test)	-	0	-
Cl 5.8(Coating adhesion test)	-	0	-
Cl 5.8.1(Thermal shock test (Coating))	-	0	-
Cl 6.1(Staining Test (Type Test - Frequency Once in a Year))	-	0	-
Cl 6.2(Mechanical Shock Test (for Cladded Utensils Only))	-	0	-
Cl 6.3(Thermal Shock Test (for Cladded Utensils Only))	-	0	-
Cl 6.4(Dry Heat Test (for Cladded Utensils Only))	-	0	-
Cl 6.5(Coating Thickness Test (for Copper Deposit))	-	0	-
Cl 6.6(Thermal shock test (3-ply construction utensil body))	-	0	-
Cl 6.7(Nominal Capacity Test)	-	0	-
Cl 8(Marking)	-	0	-
3.1(a) Carbon)	-	0	-
3.1(b) Silicon)	-	0	-
3.1(c)Manganese)	-	0	-
3.1(d) Nickel)	-	0	-
3.1(Chromium)	-	0	-
3.1(Sulphu)	-	0	-
3.1(Phosphorus)	-	0	-
Stainless Steel Utensils - Specification (THIRD REVISION)(Copper)	-	0	-
3.1(Nitrogen)	-	0	-
3.2 a(a) Carbon)	-	0	-
3.2 a(b) Silicon)	-	0	-
68995(Manganese)	-	0	-
3.2 a(d) Nickel)	-	0	-
3.2 a(Chromium)	-	0	-
3.2 a(Sulphur)	-	0	-
3.2 a(g) Phosphorus)	-	0	-
3.2 a(h) Copper)	-	0	-
3.2 a(Nitrogen)	-	0	-
3.2 b(a) Aluminium)	-	0	-
3.2 b(b) Copper)	-	0	-
3.2 b(c) Magnesium)	-	0	-
3.2 b(d) Silicon)	-	0	-
3.2 b(e) Iron)	-	0	-
3.2 b(f) Manganese)	-	0	-
3.2 b(d) Silicon)	-	0	-
3.2 b(e) Iron)	-	0	-
3.2 b(f) Manganese)	-	0	-
3.2 b(g) Zinc)	-	0	-
3.2 b(h) Titanium)	-	0	-
3.2 b(i) Chromium)	-	0	-
3.2 b(j) Cu+Si+Fe+Mn+Zn+mg)	-	0	-
3.2 b(k) Lead)	-	0	-
3.2 c(a) Carbon)	-	0	-
3.2 c(b) Silicon)	-	0	-
3.2 c(c) Manganese)	-	0	-
3.2 c(d) Nickel)	-	0	-
3.2 c(e) Chromium)	-	0	-
3.2 c(f) Sulphur)	-	0	-
3.2 c(g) Phosphorus)	-	0	-
3.3(a) Inner layer)	-	0	-
3.3(b) Middlelayer)	-	0	-
3.3(c) Outerlayer)	-	0	-
3.4(a) Carbon)	-	0	-
3.4(b) Silicon)	-	0	-
3.4(c) Manganese)	-	0	-
3.4(d) Nickel)	-	0	-
3.4(e) Chromium)	-	0	-
3.4(f) Sulphur)	-	0	-
3.4(g) Phosphorus)	-	0	-
3.4(h) Copper)	-	0	-
3.4(i) Nitrogen)	-	0	-
3.4(Thickness stainless steel lid)	-	0	-
3.5(If the utensils provided with tempered glass lid)	-	0	-
4.1(Shapes and Dimensions)	-	0	-
4.2(Thickness of the sheet)	-	0	-
4.3(Classifications)	-	0	-
4.3(Core Thickness for 3-ply Construction (asper IS15960))	-	0	-
4.3(Thickness of protective layer (as per IS 15960))	-	0	-
4.4(Thickness of 3ply full body utensil)	-	0	-
5(Workmanship and finish)	-	0	-
5.4(Handles)	-	0	-
4.1 of IS 13395(Construction)	-	0	-
4.2 of IS 13395(Materials)	-	0	-
4.3 of IS 13395(Selection and Size)	-	0	-
4.4 of Is 13395(Position of Handle and Knob with Respect to Cookware)	-	0	-
4.5 of IS 13395(Attachment to Cookware)	-	0	-
5.2 of IS 13395(Bending Strength)	-	0	-
5.3 of IS 13395(Torque Strength)	-	0	-
5.4 of IS 13395(Impact Strength)	-	0	-
5.5 of IS 13395(Fatigue Resistance 15 000 cycles withstand)	-	0	-
5.6 of IS 13395(Leakage)	-	0	-
5.7 of IS 13395(Thermal Insulation)	-	0	-
5.8 of IS 13395(Heat Resistance)	-	0	-
5.9 of IS 13395(Washing Resistance)	-	0	-
5.10 of IS 13395(Burning Resistance)	-	0	-
5.5(Material comes in contact with food)	-	0	-
6.1(Staining Test)	-	0	-
6.2(Mechanical Shock Test)	-	0	-
6.3(Thermal Shock Test)	-	0	-
6.4(Dry Heat Test)	-	0	-
6.6(Heat test)	-	0	-
6.7.1(Nominal Capacity Test)	-	0	-
6.7.2(Internal diameter of utensil)	-	0	-
Cl 3.1(Material used for manufacturing utensils)	-	0	-
Cl 3.2(Material used for composite bottom)	-	0	-
Cl 3.3(Material used for body of utensil of 3-ply construction)	-	0	-
Cl 3.4(Material used for stainless steel lid)	-	0	-
Cl 3.5(Material used for tempered glass lid)	-	0	-
Cl 3.5(Material used for stainless steel rim)	-	0	-
Cl 4.2 & Table 1(Minimum Sheet Thickness for Body of Utensil)	-	0	-
Cl 4.2 & Table 2(Minimum Sheet Thickness for Lid of Utensil)	-	0	-
Cl 4.2(Thickness of the finished utensil)	-	0	-
Cl 4.3(Classification)	-	0	-
Cl 4.4 (i)(Thickness of Aluminium disc/core)	-	0	-
Cl 4.4 (ii)(Thickness of Protector/cowl)	-	0	-
Cl 4.5(Minimum sheet thickness (3-ply utensil))	-	0	-
Cl 4.5(Thickness of finished utensil (3-ply utensil))	-	0	-
Cl 5.1(Manufacturing defect & visual appearance)	-	0	-
CL 5.2(Accessibility for cleaning)	-	0	-
Cl 5.3(Joining of handles to the utensils)	-	0	-
Cl 5.4(Requirement for handles)	-	0	-
Cl 5.5(Welding (Finish))	-	0	-
Cl 5.6(Finish of 3-ply utensil)	-	0	-
Cl 5.7(Requirement for coating)	-	0	-
Cl 5.8(Coating thickness test)	-	0	-
Cl 5.8(Coating adhesion test)	-	0	-
Cl 5.8.1(Thermal shock test (Coating))	-	0	-
Cl 6.1(Staining Test (Type Test - Frequency Once in a Year))	-	0	-
Cl 6.2(Mechanical Shock Test (for Cladded Utensils Only))	-	0	-
Cl 6.3(Thermal Shock Test (for Cladded Utensils Only))	-	0	-
Cl 6.4(Dry Heat Test (for Cladded Utensils Only))	-	0	-
Cl 6.5(Coating Thickness Test (for Copper Deposit))	-	0	-
Cl 6.6(Thermal shock test (3-ply construction utensil body))	-	0	-
Cl 6.7(Nominal Capacity Test)	-	0	-
Cl 8(Marking)	-	0	-
3.1(a) Carbon)	-	0	-
3.1(b) Silicon)	-	0	-
3.1(c)Manganese)	-	0	-
3.1(d) Nickel)	-	0	-
3.1(Chromium)	-	0	-
3.1(Sulphu)	-	0	-
3.1(Phosphorus)	-	0	-
Stainless Steel Utensils - Specification (THIRD REVISION)(Copper)	-	0	-
3.1(Nitrogen)	-	0	-
3.2 a(a) Carbon)	-	0	-
3.2 a(b) Silicon)	-	0	-
68995(Manganese)	-	0	-
3.2 a(d) Nickel)	-	0	-
3.2 a(Chromium)	-	0	-
3.2 a(Sulphur)	-	0	-
3.2 a(g) Phosphorus)	-	0	-
3.2 a(h) Copper)	-	0	-
3.2 a(Nitrogen)	-	0	-
3.2 b(a) Aluminium)	-	0	-
3.2 b(b) Copper)	-	0	-
3.2 b(c) Magnesium)	-	0	-
3.2 b(d) Silicon)	-	0	-
3.2 b(e) Iron)	-	0	-
3.2 b(f) Manganese)	-	0	-
3.2 b(d) Silicon)	-	0	-
3.2 b(e) Iron)	-	0	-
3.2 b(f) Manganese)	-	0	-
3.2 b(g) Zinc)	-	0	-
3.2 b(h) Titanium)	-	0	-
3.2 b(i) Chromium)	-	0	-
3.2 b(j) Cu+Si+Fe+Mn+Zn+mg)	-	0	-
3.2 b(k) Lead)	-	0	-
3.2 c(a) Carbon)	-	0	-
3.2 c(b) Silicon)	-	0	-
3.2 c(c) Manganese)	-	0	-
3.2 c(d) Nickel)	-	0	-
3.2 c(e) Chromium)	-	0	-
3.2 c(f) Sulphur)	-	0	-
3.2 c(g) Phosphorus)	-	0	-
3.3(a) Inner layer)	-	0	-
3.3(b) Middlelayer)	-	0	-
3.3(c) Outerlayer)	-	0	-
3.4(a) Carbon)	-	0	-
3.4(b) Silicon)	-	0	-
3.4(c) Manganese)	-	0	-
3.4(d) Nickel)	-	0	-
3.4(e) Chromium)	-	0	-
3.4(f) Sulphur)	-	0	-
3.4(g) Phosphorus)	-	0	-
3.4(h) Copper)	-	0	-
3.4(i) Nitrogen)	-	0	-
3.4(Thickness stainless steel lid)	-	0	-
3.5(If the utensils provided with tempered glass lid)	-	0	-
4.1(Shapes and Dimensions)	-	0	-
4.2(Thickness of the sheet)	-	0	-
4.3(Classifications)	-	0	-
4.3(Core Thickness for 3-ply Construction (asper IS15960))	-	0	-
4.3(Thickness of protective layer (as per IS 15960))	-	0	-
4.4(Thickness of 3ply full body utensil)	-	0	-
5(Workmanship and finish)	-	0	-
5.4(Handles)	-	0	-
4.1 of IS 13395(Construction)	-	0	-
4.2 of IS 13395(Materials)	-	0	-
4.3 of IS 13395(Selection and Size)	-	0	-
4.4 of Is 13395(Position of Handle and Knob with Respect to Cookware)	-	0	-
4.5 of IS 13395(Attachment to Cookware)	-	0	-
5.2 of IS 13395(Bending Strength)	-	0	-
5.3 of IS 13395(Torque Strength)	-	0	-
5.4 of IS 13395(Impact Strength)	-	0	-
5.5 of IS 13395(Fatigue Resistance 15 000 cycles withstand)	-	0	-
5.6 of IS 13395(Leakage)	-	0	-
5.7 of IS 13395(Thermal Insulation)	-	0	-
5.8 of IS 13395(Heat Resistance)	-	0	-
5.9 of IS 13395(Washing Resistance)	-	0	-
5.10 of IS 13395(Burning Resistance)	-	0	-
5.5(Material comes in contact with food)	-	0	-
6.1(Staining Test)	-	0	-
6.2(Mechanical Shock Test)	-	0	-
6.3(Thermal Shock Test)	-	0	-
6.4(Dry Heat Test)	-	0	-
6.6(Heat test)	-	0	-
6.7.1(Nominal Capacity Test)	-	0	-
6.7.2(Internal diameter of utensil)	-	0	-
Annex C(Test for leaching)	-	100	-
Annex C(Sensorial test)	-	100	-
Cl 3.1(Material used for manufacturing utensils)	-	0	-
Cl 3.2(Material used for composite bottom)	-	0	-
Cl 3.3(Material used for body of utensil of 3-ply construction)	-	0	-
Cl 3.4(Material used for stainless steel lid)	-	0	-
Cl 3.5(Material used for tempered glass lid)	-	0	-
Cl 3.5(Material used for stainless steel rim)	-	0	-
Cl 4.2 & Table 1(Minimum Sheet Thickness for Body of Utensil)	-	0	-
Cl 4.2 & Table 2(Minimum Sheet Thickness for Lid of Utensil)	-	0	-
Cl 4.2(Thickness of the finished utensil)	-	0	-
Cl 4.3(Classification)	-	0	-
Cl 4.4 (i)(Thickness of Aluminium disc/core)	-	0	-
Cl 4.4 (ii)(Thickness of Protector/cowl)	-	0	-
Cl 4.5(Minimum sheet thickness (3-ply utensil))	-	0	-
Cl 4.5(Thickness of finished utensil (3-ply utensil))	-	0	-
Cl 5.1(Manufacturing defect & visual appearance)	-	0	-
CL 5.2(Accessibility for cleaning)	-	0	-
Cl 5.3(Joining of handles to the utensils)	-	0	-
Cl 5.4(Requirement for handles)	-	0	-
Cl 5.5(Welding (Finish))	-	0	-
Cl 5.6(Finish of 3-ply utensil)	-	0	-
Cl 5.7(Requirement for coating)	-	0	-
Cl 5.8(Coating thickness test)	-	0	-
Cl 5.8(Coating adhesion test)	-	0	-
Cl 5.8.1(Thermal shock test (Coating))	-	0	-
Cl 6.1(Staining Test (Type Test - Frequency Once in a Year))	-	0	-
Cl 6.2(Mechanical Shock Test (for Cladded Utensils Only))	-	0	-
Cl 6.3(Thermal Shock Test (for Cladded Utensils Only))	-	0	-
Cl 6.4(Dry Heat Test (for Cladded Utensils Only))	-	0	-
Cl 6.5(Coating Thickness Test (for Copper Deposit))	-	0	-
Cl 6.6(Thermal shock test (3-ply construction utensil body))	-	0	-
Cl 6.7(Nominal Capacity Test)	-	0	-
Cl 8(Marking)	-	0	-
3.1(a) Carbon)	-	0	-
3.1(b) Silicon)	-	0	-
3.1(c)Manganese)	-	0	-
3.1(d) Nickel)	-	0	-
3.1(Chromium)	-	0	-
3.1(Sulphu)	-	0	-
3.1(Phosphorus)	-	0	-
Stainless Steel Utensils - Specification (THIRD REVISION)(Copper)	-	0	-
3.1(Nitrogen)	-	0	-
3.2 a(a) Carbon)	-	0	-
3.2 a(b) Silicon)	-	0	-
68995(Manganese)	-	0	-
3.2 a(d) Nickel)	-	0	-
3.2 a(Chromium)	-	0	-
3.2 a(Sulphur)	-	0	-
3.2 a(g) Phosphorus)	-	0	-
3.2 a(h) Copper)	-	0	-
3.2 a(Nitrogen)	-	0	-
3.2 b(a) Aluminium)	-	0	-
3.2 b(b) Copper)	-	0	-
3.2 b(c) Magnesium)	-	0	-
3.2 b(d) Silicon)	-	0	-
3.2 b(e) Iron)	-	0	-
3.2 b(f) Manganese)	-	0	-
3.2 b(d) Silicon)	-	0	-
3.2 b(e) Iron)	-	0	-
3.2 b(f) Manganese)	-	0	-
3.2 b(g) Zinc)	-	0	-
3.2 b(h) Titanium)	-	0	-
3.2 b(i) Chromium)	-	0	-
3.2 b(j) Cu+Si+Fe+Mn+Zn+mg)	-	0	-
3.2 b(k) Lead)	-	0	-
3.2 c(a) Carbon)	-	0	-
3.2 c(b) Silicon)	-	0	-
3.2 c(c) Manganese)	-	0	-
3.2 c(d) Nickel)	-	0	-
3.2 c(e) Chromium)	-	0	-
3.2 c(f) Sulphur)	-	0	-
3.2 c(g) Phosphorus)	-	0	-
3.3(a) Inner layer)	-	0	-
3.3(b) Middlelayer)	-	0	-
3.3(c) Outerlayer)	-	0	-
3.4(a) Carbon)	-	0	-
3.4(b) Silicon)	-	0	-
3.4(c) Manganese)	-	0	-
3.4(d) Nickel)	-	0	-
3.4(e) Chromium)	-	0	-
3.4(f) Sulphur)	-	0	-
3.4(g) Phosphorus)	-	0	-
3.4(h) Copper)	-	0	-
3.4(i) Nitrogen)	-	0	-
3.4(Thickness stainless steel lid)	-	0	-
3.5(If the utensils provided with tempered glass lid)	-	0	-
4.1(Shapes and Dimensions)	-	0	-
4.2(Thickness of the sheet)	-	0	-
4.3(Classifications)	-	0	-
4.3(Core Thickness for 3-ply Construction (asper IS15960))	-	0	-
4.3(Thickness of protective layer (as per IS 15960))	-	0	-
4.4(Thickness of 3ply full body utensil)	-	0	-
5(Workmanship and finish)	-	0	-
5.4(Handles)	-	0	-
4.1 of IS 13395(Construction)	-	0	-
4.2 of IS 13395(Materials)	-	0	-
4.3 of IS 13395(Selection and Size)	-	0	-
4.4 of Is 13395(Position of Handle and Knob with Respect to Cookware)	-	0	-
4.5 of IS 13395(Attachment to Cookware)	-	0	-
5.2 of IS 13395(Bending Strength)	-	0	-
5.3 of IS 13395(Torque Strength)	-	0	-
5.4 of IS 13395(Impact Strength)	-	0	-
5.5 of IS 13395(Fatigue Resistance 15 000 cycles withstand)	-	0	-
5.6 of IS 13395(Leakage)	-	0	-
5.7 of IS 13395(Thermal Insulation)	-	0	-
5.8 of IS 13395(Heat Resistance)	-	0	-
5.9 of IS 13395(Washing Resistance)	-	0	-
5.10 of IS 13395(Burning Resistance)	-	0	-
5.5(Material comes in contact with food)	-	0	-
6.1(Staining Test)	-	0	-
6.2(Mechanical Shock Test)	-	0	-
6.3(Thermal Shock Test)	-	0	-
6.4(Dry Heat Test)	-	0	-
6.6(Heat test)	-	0	-
6.7.1(Nominal Capacity Test)	-	0	-
6.7.2(Internal diameter of utensil)	-	0	-
Annex C(Test for leaching)	-	0	-
Annex C(Sensorial test)	-	0	-

26 Jul, 2027

-
Included w.e.f 24.06.2025

4785

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 1363 : Part 1 (2023)

Hexagon head bolts, screws and nuts of product grade C Part 1 Hexagon head bolts (Size range M5 to M64) (sixth revision)

Size range M5 to M64

17500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(Dimensions)	-	17500	-
Cl-5, Table-5(General requirements)	-	17500	-
Cl-5, Table-5(Thread-Tolerance class)	-	17500	-
Cl-5, Table-5(Mechanical properties- Property class, Symbol)	-	17500	-
Cl-5, Table-5(Tolerances-Product grade)	-	17500	-
Cl-5, Table-5(Surface condition -Electroplated coatings)	-	17500	-
Cl-5, Table-5(Surface condition- Non-electrolytically applied zinc flake)	-	17500	-
Cl-5, Table-5(Surface condition - Hot dip galvanized coatings)	-	17500	-
Cl-5, Table-5(Surface integrity- Limits for surface discontinuities)	-	17500	-
Cl-6(Marking)	-	17500	-

31 Dec, 2026

-
-

4786

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 1341 (2018)

Steel Butt Hinges - Specification (Sixth Revision)

LW,LWU,MWU,MW,BR,SQ,HW1,HW2

7800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3 Tables 2 to 9(Types)	-	7800	-
5.1 Tables 2 to 9 (2)(Size of Hinge)	-	7800	-
5.1 Tables 2 to 9 (3)(Length A)	-	7800	-
5.1 Tables 2 to 9 (4)(Breadth B)	-	7800	-
5.1 Tables 2 to 9 (4)(Breadth B1)	-	7800	-
5.1 Tables 2 to 9 (4)(Breadth B2)	-	7800	-
5.1 Tables 2 to 9 (5)(Thickness of Flap C)	-	7800	-
5.1 Tables 2 to 9 (6)(Diameter of Hinge Pin D)	-	7800	-
5.1 Tables 2 to 9 (7)(Number of Knuckles)	-	7800	-
5.1 Tables 2 to 9 (8)(Number of Screw Holes)	-	7800	-
5.1 Tables 2 to 9 (9)(Holes for Screw No.)	-	7800	-
6.1(General)	-	7800	-
6.1(General)	-	7800	-
6.1(General)	-	7800	-
6.2.1(Knuckles)	-	7800	-
6.3(Pins)	-	7800	-
6.4(Screw Holes)	-	7800	-
6.4.2(Position of Holes)	-	7800	-
6.4.2(X)	-	7800	-
6.4.2(Y)	-	7800	-
6.4.2(Z)	-	7800	-
6.4.2.1(Position of Holes)	-	7800	-
7(Finish)	-	7800	-
TABLE-1 (Clause-4)(TITANIUM)	-	7800	-
TABLE-1 (Clause-4)(VANADIUM)	-	7800	-
TABLE-1 (Clause-4)(NIOBIUM)	-	7800	-
TABLE-1 (Clause-4)(Molybdenum)	-	7800	-
TABLE-1 (Clause-4)(Chromium)	-	7800	-
TABLE-1 (Clause-4)(Nickel)	-	7800	-
TABLE-1 (Clause-4)( ALUMINIUM)	-	7800	-
TABLE-1 (Clause-4)(SILICON)	-	7800	-
TABLE-1 (Clause-4)(NITROGEN)	-	1500	-
TABLE-1 (Clause-4)(MANGANESE)	-	7800	-
TABLE-1 (Clause-4)(PHOSPHURS)	-	7800	-
TABLE-1 (Clause-4)(SULPHUR)	-	7800	-
TABLE-1 (Clause-4)( CARBON)	-	7800	-
Clause 4 Table 1(Manganese ( Pin))	-	7800	-
Clause 4 Table 1(Phosphorus ( Pin))	-	7800	-
Clause 4 Table 1(Sulphur ( Pin))	-	7800	-
Clause 4 Table 1(Carbon ( Pin))	-	7800	-
Clause 4 Table 1(Nitrogen ( Flap))	-	7800	-
Clause 4 Table 1(Manganese ( Flap))	-	7800	-
Clause 4 Table 1(Phosphorus ( Flap))	-	7800	-
Clause 4 Table 1(Sulphur ( Flap))	-	7800	-
Clause 4 Table 1(Carbon ( Flap))	-	7800	-
8(Marking)	-	7800	-
Cl 4 & Table 1(Sulphur- IS 228(Part 9))	-	7800	-
Cl 4 & Table 1(Carbon- IS 228(Part 1))	-	7800	-
Cl 4 & Table 1(Phosphorous- IS 228(Part 3))	-	7800	-
Cl 4 & Table 1(Manganese- IS 228(Part 2))	-	7800	-
Cl 4 & Table 1(Silicon- IS 228(Part 2))	-	7800	-
Cl 4 & Table 1(Nitrogen -IS 228(Part 19))	-	7800	-

31 Dec, 2026

-
-

4787

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 2041 (2024)

Steel Plates and Strips for Pressure Vessels Used at Moderate and Low Temperature â Specification (Fourth Revision)

Room temperature quality and Elevated temperature quality

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(General requirements)	-	0	NA
Cl-6(MANUFACTURE)	-	0	NA
Cl-7.1, Table-1(C)	-	600	-
Cl-7.1, Table-1(Si)	-	600	-
Cl-7.1, Table-1(Mn Max)	-	600	-
Cl-7.1, Table-1(P max)	-	600	-
Cl-7.1, Table-1(S Max)	-	600	-
Cl-7.1, Table-1(Al Max)	-	600	-
Cl-7.1, Table-1(N Max)	-	600	-
Cl-7.1, Table-1(Nb Max)	-	600	-
Cl-7.1, Table-1(V Max)	-	600	-
Cl-7.1, Table-1(Ti Max)	-	600	-
Cl-7.1, Table-1(Nb + V + Ti Max)	-	600	-
Cl-7.1, Table-1(Cr Max)	-	600	-
Cl-7.1, Table-1(Cu Max)	-	600	-
Cl-7.1, Table-1(Mo Max)	-	600	-
Cl-7.1, Table-1(Ni Max)	-	600	-
Cl-7.2, Table-2(Carbon)	-	0	NA
Cl-7.2, Table-2(Silicon)	-	0	NA
Cl-7.2, Table-2(Manganese)	-	0	NA
Cl-7.2, Table-2(Phosphorus)	-	0	NA
Cl-7.2, Table-2(Sulphur)	-	0	NA
Cl-7.2, Table-2(Niobium)	-	0	NA
Cl-7.2, Table-2(Vanadium)	-	0	NA
Cl-7.2, Table-2(Titanium)	-	0	NA
Cl-7.2, Table-2(Chromium)	-	0	NA
Cl-7.2, Table-2(Copper)	-	0	NA
Cl-7.2, Table-2(Molybdenum)	-	0	NA
Cl-7.2, Table-2(Nickel)	-	0	NA
Cl-8(HEAT-TREATMENT)	-	0	NA
Cl-9(FREEDOM FROM DEFECTS)	-	1000	-
Cl-9.3(Edge Imperfection)	-	1000	-
Cl-10(width ( average of 3))	-	1500	-
Cl-11(THEORETICAL MASS)	-	1000	-
Cl-12.1.1(Number of Tests)	-	0	NA
Cl-12.1.2(Orientation of Test Sample)	-	0	NA
Cl-12.1.3(Location of Test Sample)	-	0	NA
Cl-12.1.6(Tensile Test Result)	-	1500	-
Cl-12.2(Bend Test)	-	1500	-
Cl-12.3.1(Charpy impact test)	-	3000	-
Cl-12.3.2(Number of Tests)	-	0	NA
Cl-12.3.3(Orientation)	-	0	NA
Cl-12.5(Re-heat Treatment)	-	0	NA
Cl-14(RUST PROTECTION)	-	500	-
Cl-15(MARKING)	-	0	NA
Cl-4.1(General requirements)	-	-	-
Cl-6(MANUFACTURE)	-	-	-
Cl-7.1, Table-1(C)	-	-	-
Cl-7.1, Table-1(Si)	-	-	-
Cl-7.1, Table-1(Mn Max)	-	-	-
Cl-7.1, Table-1(P max)	-	-	-
Cl-7.1, Table-1(S Max)	-	-	-
Cl-7.1, Table-1(Al Max)	-	-	-
Cl-7.1, Table-1(N Max)	-	-	-
Cl-7.1, Table-1(Nb Max)	-	-	-
Cl-7.1, Table-1(V Max)	-	-	-
Cl-7.1, Table-1(Ti Max)	-	-	-
Cl-7.1, Table-1(Nb + V + Ti Max)	-	-	-
Cl-7.1, Table-1(Cr Max)	-	-	-
Cl-7.1, Table-1(Cu Max)	-	-	-
Cl-7.1, Table-1(Mo Max)	-	-	-
Cl-7.1, Table-1(Ni Max)	-	-	-
Cl-7.2, Table-2(Carbon)	-	-	-
Cl-7.2, Table-2(Silicon)	-	-	-
Cl-7.2, Table-2(Manganese)	-	-	-
Cl-7.2, Table-2(Phosphorus)	-	-	-
Cl-7.2, Table-2(Sulphur)	-	-	-
Cl-7.2, Table-2(Niobium)	-	-	-
Cl-7.2, Table-2(Vanadium)	-	-	-
Cl-7.2, Table-2(Titanium)	-	-	-
Cl-7.2, Table-2(Chromium)	-	-	-
Cl-7.2, Table-2(Copper)	-	-	-
Cl-7.2, Table-2(Molybdenum)	-	-	-
Cl-7.2, Table-2(Nickel)	-	-	-
Cl-8(HEAT-TREATMENT)	-	-	-
Cl-9(FREEDOM FROM DEFECTS)	-	-	-
Cl-9.3(Edge Imperfection)	-	-	-
Cl-10(width ( average of 3))	-	-	-
Cl-11(THEORETICAL MASS)	-	-	-
Cl-12.1.1(Number of Tests)	-	-	-
Cl-12.1.2(Orientation of Test Sample)	-	-	-
Cl-12.1.3(Location of Test Sample)	-	-	-
Cl-12.1.6(Tensile Test Result)	-	-	-
Cl-12.2(Bend Test)	-	-	-
Cl-12.3.1(Charpy impact test)	-	-	-
Cl-12.3.2(Number of Tests)	-	-	-
Cl-12.3.3(Orientation)	-	-	-
Cl-12.5(Re-heat Treatment)	-	-	-
Cl-14(RUST PROTECTION)	-	-	-
Cl-15(MARKING)	-	-	-

31 Dec, 2026

-
Included w.e.f. 17.02.2025 Exclusion: Cl-13 (ULTRASONIC TESTING), Cl-12.1.6 (Elevated Temperature Tensile as per IS 1608(P-2)

4788

Alpha Test House Private Limited, Delhi

8131026

IS 16270 (2023)

Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

550000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Photovoltaic Energy System)	-	3000	-
Cl-4.2(Secondary Cells and Batteries)	-	3000	-
Cl-4.3(General Operating Conditions)	-	3000	-
Cl-4.3.8(Storage)	-	3000	-
Cl-4.3.9(Operating Temperature)	-	3000	-
Cl-5.1(Mechanical Endurance)	-	3000	-
Cl-5.2(Charge Efficiency)	-	3000	-
Cl-5.3(Deep Discharge Protection)	-	3000	-
Cl-5.4(Marking)	-	3000	-
Cl-5.5(Safety)	-	3000	-
Cl-5.6(Documentation)	-	3000	-
Cl-6(Functional characteristice)	-	3000	-
Cl-7(General test conditions)	-	3000	-
Cl-8.1(Capacity Test)	-	100000	-
Cl-8.2(Endurance Test)	-	100000	-
Cl-8.3(Charge Retention Test)	-	100000	-
Cl-8.4(Cycle Endurance in Photovoltaic Application (Extreme Conditions))	-	100000	-
Cl-8.5(Sulphation Test (Applicable for Lead Acid Batteries only))	-	50000	-
Cl-8.6(Water Loss Test (Valid for Flooded Lead Acid Batteries only))	-	50000	-
Cl-9.1(Type Tests)	-	3000	-
Cl-9.2(Acceptance Test)	-	3000	-
4.3.7.1(Specific gravity)	-	5000	-

17 May, 2027

-
Included w.f.e.21.02.2025

4789

Alpha Test House Private Limited, Delhi

8131026

IS 17980 (2022)

Maximum Power Point Tracking Efficiency of Grid Connected Photovoltaic Inverters (First Revision)

520000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4.1 (a)(Static MPPT efficiency)	-	260000		-
Cl-4.1 (b)(Dynamic MPPT efficiency)	-	260000		-

17 May, 2027

-
Included w.e.f.17.03.2025

4790

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 12427 (2001)

Fasteners - Threaded steel fasteners - Hexagon head transmission tower bolts - Specification (First Revision)

M 12 - M 24

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9(Designation)	-	25000	-
Cl 3.1, Cl 3.2, Fig-1, Table-1 & Table-2(Dimensions)	-	25000	-
Cl 3.3, IS 4218(Pt 1 to 4) & IS 2334(Threads)	-	25000	-
Cl 5.1 & IS 14394(Nuts)	-	25000	-
Cl 5.2, IS 2016 & IS 4759(Washers)	-	25000	-
Cl 6.1 & IS 1367(Pt 3)(Bolt Tensile,Proof,Wedge Loading,Hardness Test)	-	25000	-
Cl 6.2(Bolt Shear Strength)	-	25000	-
Cl 7 & IS 1367(Pt 13)(Finish)	-	25000	-
Cl 8 & IS 1367(Pt 9/Sec1)(General Requirements)	-	25000	-
(Cl 8)(General Requirements)	-	25000	-
(Cl 7)(Finish)	-	25000	-
(Cl 7)(Finish)	-	25000	-
(Cl 6.2)(Shear Strength )	-	25000	-
(Cl 9.15)(Mechanical Properties)	-	25000	-
(Cl 9.14)(Mechanical Properties)	-	25000	-
(Cl 9.13)(Mechanical Properties)	-	25000	-
(Cl 9.12)(Mechanical Properties)	-	25000	-
(Cl 9.11)(Mechanical Properties)	-	25000	-
(Cl 9.10)(Mechanical Properties)	-	25000	-
(Cl 8.3)(Mechanical Properties)	-	25000	-
(Cl 9.9)(Mechanical Properties)	-	25000	-
(Cl 9.8)(Mechanical Properties)	-	25000	-
(Cl 9.7) (Mechanical Properties)	-	25000	-
(Cl 9.7) (Mechanical Properties)	-	25000	-
(Cl 9.7) (Mechanical Properties)	-	25000	-
(Cl 9.7) (Mechanical Properties)	-	25000	-
(Cl 9.6)(Mechanical Properties)	-	25000	-
(Cl 9.5)(Mechanical Properties)	-	25000	-
(Cl 9.4)(Mechanical Properties)	-	25000	-
(Cl 9.3)(Mechanical Properties)	-	25000	-
(Cl 9.3)(Mechanical Properties)	-	25000	-
(Cl 9.2)(Mechanical Properties)	-	25000	-
(Cl 9.1)(Mechanical Properties)	-	25000	-
Cl 6.1 & IS 1367(Pt 3)(Mechanical Properties)	-	25000	-
(Cl 5)(Matching Nuts & Washers)	-	25000	-
(Cl 5)(Matching Nuts & Washers)	-	25000	-
(Cl 3.3)(Threads)	-	25000	-
Cl 3 Table-1 & Table-2(Dimensions)	-	25000	-
Cl 3 Table-1 & Table-2(Dimensions)	-	25000	-
Cl 3 Table-1 & Table-2(Dimensions)	-	25000	-
Cl 3 Table-1 & Table-2(Dimensions)	-	25000	-
Cl 3 Table-1 & Table-2(Dimensions)	-	25000	-
Cl 3 Table-1 & Table-2(Dimensions)	-	25000	-
Cl 3 Table-1 & Table-2(Dimensions)	-	25000	-
Cl 3 Table-1 & Table-2(Dimensions)	-	25000	-
Cl 3 Table-1 & Table-2(Dimensions)	-	25000	-
Cl 3 Table-1 & Table-2(Dimensions)	-	25000	-
Cl 3 Table-1 & Table-2(Dimensions)	-	25000	-
Cl 3 Table-1 & Table-2(Dimensions)	-	25000	-
Cl 3 Table-1 & Table-2(Dimensions)	-	25000	-
Cl 3 Table-1 & Table-2(Dimensions)	-	25000	-
Cl 3 Table-1 & Table-2(Dimensions)	-	25000	-
Cl 3 Table-1 & Table-2(Dimensions)	-	25000	-
Cl 9(Designation)	-	25000	-
(Cl 9.3)(Mechanical Properties)	-	25000	-

31 Dec, 2026

-
-

4791

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET), RANCHI

5173614

IS 13488 (2008)

Irrigation equipment - Emitting pipe systems - Specification (First Revision)

Category- A & B

9544.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Materials - shall be resistant to fertilizers and chemicals commonly employed in irrigation, and shall be suitable for use with water at temperatures up to 60°C and at pressures designed for the emitting pipe)	-	6900.00	For Raw Material Identification: 1050/- Toluene Extract: 1100/- Volatile Content: 700/- Density: 700 + 625 /- MFI: 1100/- CBC: 925/- CBD: 700/-
5.1.2 (Ref. Cl 4.1.a of IS 12786 : 1989)(Potyethylene - higher olefins constituent )	-	0	-
5.1.2 (Ref. Cl 4.1.b of IS 12786 : 1989)(Potyethylene - anti-oxidant)	-	0	-
5.1.2 (Ref. Cl 4.1.c.i of IS 12786 : 1989)(Density)	-	700	-
5.1.2 (Ref. Cl 4.1.c.ii of IS 12786 : 1989)(Toluene extract - Annex A of IS 12786:1989)	-	1100	-
5.1.2 (Ref. Cl 4.1.c.iii of IS 12786 : 1989)(Volatile matter - Annex B of IS 12786:1989)	-	700	-
5.1.2 (Ref. Cl 4.1.c & 4.2.a of IS 12786 : 1989)(Carbon Black content - IS 2530 : 1963)	-	925	-
5.1.2 (Ref. Cl 4.2.b of IS 12786 : 1989)(The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	700	-
6.2.2(Fittings)	-	0	-
6.3(General)	-	500	For Visual Appearance
6.3(General)	-	0	-
5.1.2 (Ref. Cl 4.3 of IS 12786 : 1989)(Addition of not more than 10 percent of the manufactures own rework material produced during the manufacture and works testing of pipe complying with this standard is permitted. No other rework material shall be used)	-	0	-
8.1.2(Uniformity of Emission Rate for Unregulated Emitting Pipes)	-	1000	-
8.1.3(Uniformity of Emission Rate for Regulated Emitting Pipes)	-	0	-
8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure)	-	1000	-
8.2.1(Unregu/Qt~d Emining Pipe)	-	0	-
8.2.2(Regulated Emitting Pipes)	-	0	-
8.3.1(Wall Thickness ofEmitting Pipe)	-	250	-
8.3.2(Inside Diameter ofEmitting Pipe)	-	250	-
8.3.3(Flow Paths in Emitting Unit)	-	250	-
8.3.4(Spacing ofEmitter Units)	-	250	-
8.4.1(Resistance to Hydrostatic Pressure at Ambient Temperature)	-	1000	-
8.4.2(Resistance to Hydrostatic Pressure at Elevated Temperature)	-	1600	-
8.5(Resistance to Tension at Elevated Temperature)	-	1100	-
8.5(Resistance to Tension at Elevated Temperature)	-	0	-
8.5(Resistance to Tension at Elevated Temperature)	-	0	-
8.6(Resistance to Pull Out of Joints Between Fitting and Emitting IS 13479)	-	500	-
8.7.1(Resistance of PE Emitting Pipe to Environmental Stress Cracking -Acceptance Test Annex D of IS 12786)	-	1200	-
8.7.2(Resistance of PE Emitting Pipe to Environmental Stress Cracking - Type Test Annex D of IS 12786)	-	1600	-
8.8(Determination of Emitting Unit Exponent)	-	600	-
9.1(DESIGNATION - Non regulated Emitting Pipe)	-	0	-
9.2(DESIGNATION - Regulated Emitting Pipe)	-	0	-
4.1 a(Identification)	-	1050	-
4.1 a(Identification)	-	0	-
4.1 c(Volatile matter Extract)	-	700	-
4.1 d(Density)	-	700	-
4.1 d(MFI @ 1900C/2.16 Kg)	-	1100	-
4.2(Carbon black content)	-	925	-
4.2(Carbon black dispersion)	-	700	-
5.1(Materials)	-	0	-
6.1.1, Table 1,(i)(Nominal Diameter)	-	250	-
6.1.1, Table 1,(ii)(Inside Diameter)	-	250	-
6.1.1, Table 1,(iii)(Tolerance on I.D)	-	0	-
6.1.1, Table 1,(iv)(Wall Thickness)	-	250	-
6.2(Fittings)	-	0	-
6.3(General)	-	500	-
7.1(Test Specimens)	-	0	-
7.2(Order of Tests)	-	0	-
7.3(Testing Conditions)	-	0	-
7.4(Accuracy of Measuring Devices)	-	0	-
8.1(Uniformity of Emission Rate)	-	0	-
8.1.2(Unregulated Emitting Pipes)	-	0	-
8.1.3(Regulated Emitting Pipes)	-	0	-
8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure)	-	0	-
8.2.1(Unregulated Emitting Pipes)	-	0	-
8.2.2(Regulated Emitting Pipes)	-	0	-
8.3.1(Wall Thickness ofEmitting Pipe)	-	0	-
8.3.2(Inside Diameter ofEmitting Pipe)	-	0	-
8.3.3(Flow Paths in Emitting Unit)	-	0	-
8.3.4(Spacing of Emitter Units)	-	0	-
8.4(Resistance of Emitting Pipes to Hydrostatic Pressure)	-	0	-
8.5(Resistance to Tension at Elevated Temperature)	-	0	-
8.6(Resistance to Pull Out ofJoints Between Fitting and Emitting)	-	0	-
8.7.1(Acceptance Test)	-	0	-
8.7.2(Type Test)	-	0	-
8.8(Determination of Emitting Unit Exponen)	-	0	-
9.1(Non-regulated Emitting Pipe)	-	0	-
9.2(Regulated Emitting Pipe)	-	0	-
10.1(Marking)	-	0	-

09 Aug, 2026

-
Included.w.e.f.30.01.2025

4792

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 737 (2024)

WROUGHT ALUMINIUM AND ALUMINIUM ALLOY SHEET AND STRIP FOR GENERAL ENGINEERING PURPOSES SPECIFICATION (Fifth Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4(Ordering Information - IS 737)	-	0	NA
Cl. 4 (a)(Grade/ Thickness - IS 737)	-	0	NA
Cl. 4 (b)(Condition - IS 737)	-	0	NA
Cl. 4 (c)(Quantity in Kg - IS 737)	-	0	NA
Cl. 4 (d)(Size - Thickness X Width X Length (T X W X L) in mm for sheets and (T X W) in mm for Strips/ Coils - IS 737)	-	0	NA
Cl. 4 (e)(Coil ID and Coil Weight for Strips/ Coils - IS 737)	-	0	NA
Cl. 4 (f)(Core/ Spool Requirement for Coils - IS 737)	-	0	NA
Cl. 4 (g)(Packing Mode - IS 737)	-	0	NA
Cl. 5(Supply for Material - IS 737/ IS 10259)	-	0	NA
Cl. 6(Freedom from Defects - IS 737)	-	500	-
Cl. 7(Chemical Composition - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	0	-
Cl. 7(Si - IS 504 (Part-1)/ ASTM E 1251/ IS 11035)	-	500	Testing charges for Vanadium, Boron, Gallium, Phosphorus and Zirconium are Rs. 2500/- (Rs. 500/- for each parameter)
Cl. 7(Fe - IS 504 (Part-2)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Cu - IS 504 (Part-3)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Mn - IS 504 (Part-5)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Mg - IS 504 (Part-6)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Cr - IS 504 (Part-8)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Zn - IS 504 (Part-4)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Ti - IS 504 (Part-11)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Others (Each) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	1000	-
Cl. 7(Others (Total) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	0	Testing charges already mentioned above at Clause no. 7 (Others (Each) i.e. Rs. 1000/-
Cl. 7(Al - IS 504)	-	500	-
Cl. 8(Mechanical Properties - IS 1608 (Part-1))	-	0	-
Cl. 8.1(0.2% Proof Stress - IS 1608 (Part-1))	-	1500	-
Cl. 8.1(Tensile Strength - IS 1608 (Part-1))	-	1500	-
Cl. 8.1(Elongation on 50mm Gauge Length - IS 1608 (Part-1))	-	1000	-
Cl. 8.2(Bend Test - IS 1599)	-	1000	-
Cl. 9(Condition - IS 737/ IS 5052)	-	0	NA
Cl. 10(Dimensions and Tolerances - IS 737/ IS 2676)	-	1500	-
Cl. 11(Selection of Test Samples - IS 737)	-	0	NA
Cl. 11.1(Sheet and Strip of Aluminium or Non - Heat Treatable Aluminium Alloy - IS 737)	-	0	NA
Cl. 11.2(Sheet and Strip of Heat - Treatable Aluminium Alloys - IS 737)	-	0	NA
Cl. 12(Retests - IS 737/ IS 10259)	-	0	NA
Cl. 13(Packaging - IS 737/ IS 10259)	-	0	NA
Cl. 13.1(Marking - IS 737)	-	0	NA

31 Dec, 2026

-
Included .w.e.f.10.02.2025

4793

Institute for Auto Parts and Hand Tools Technology, Ludhiana

9126034

IS 18471 : Part 1 (2023)

Fasteners ï¿½ Cross Recessed Drilling Screws with Tapping Screw Thread Part 1 Pan Head

All grade, Type & Size as per IS 18471 -1

17650 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 3.0(Dimenssions.)	-	810	-
Clause. 3.0(Dimenssions.)	-	0	-
Clause. 3.0(Thread size.)	-	0	-
Clause. 3.0(Length)	-	0	-
Clause. 4.0(Material)	-	1200	-
Clause. 4.0(Thread)	-	0	-
Clause. 4.0(Cross recesses)	-	0	-
Clause. 4.0(Mechnical and functional properties.)	-	15640	-
Clause. 4.0(Finish)	-	0	-
Clause. 4.0(Acceptability)	-	0	-
Clause.5.0(Designation)	-	0	-
Clause.5.0(Marking)	-	0	-
Clause. 3.0(Dimenssions.)	-	0	-
Clause. 3.0(Dimenssions.)	-	0	-
Clause. 3.0(Thread size.)	-	0	-
Clause. 3.0(Length)	-	0	-
Clause. 4.0(Material)	-	0	-
Clause. 4.0(Thread)	-	0	-
Clause. 4.0(Cross recesses)	-	0	-
Clause. 4.0(Mechnical and functional properties.)	-	0	-
Clause. 4.0(Finish)	-	0	-
Clause. 4.0(Acceptability)	-	0	-
Clause.5.0(Designation)	-	0	-
Clause.5.0(Marking)	-	0	-
Clause. 3.0(Dimenssions.)	-	0	-
Clause. 3.0(Dimenssions.)	-	0	-
Clause. 3.0(Thread size.)	-	0	-
Clause. 3.0(Length)	-	0	-
Clause. 4.0(Material)	-	0	-
Clause. 4.0(Thread)	-	0	-
Clause. 4.0(Cross recesses)	-	0	-
Clause. 4.0(Mechnical and functional properties.)	-	0	-
Clause. 4.0(Finish)	-	0	-
Clause. 4.0(Acceptability)	-	0	-
Clause.5.0(Designation)	-	0	-
Clause.5.0(Marking)	-	0	0
Clause. 3.0(Dimenssions.)	-	0	-
Clause. 3.0(Dimenssions.)	-	0	-
Clause. 3.0(Thread size.)	-	0	-
Clause. 3.0(Length)	-	0	-
Clause. 4.0(Material)	-	0	-
Clause. 4.0(Thread)	-	0	-
Clause. 4.0(Cross recesses)	-	0	-
Clause. 4.0(Mechnical and functional properties.)	-	0	-
Clause. 4.0(Finish)	-	0	-
Clause. 4.0(Acceptability)	-	0	-
Clause.5.0(Designation)	-	0	-
Clause.5.0(Marking)	-	0	-
Clause. 3.0(Dimenssions.)	-	0	-
Clause. 3.0(Dimenssions.)	-	0	-
Clause. 3.0(Thread size.)	-	0	-
Clause. 3.0(Length)	-	0	-
Clause. 4.0(Material)	-	0	-
Clause. 4.0(Thread)	-	0	-
Clause. 4.0(Cross recesses)	-	0	-
Clause. 4.0(Mechnical and functional properties.)	-	0	-
Clause. 4.0(Finish)	-	0	-
Clause. 4.0(Acceptability)	-	0	0
Clause.5.0(Designation)	-	0	-
Clause.5.0(Marking)	-	0	-

17 Feb, 2028

-
Included w.e.f 03.06.2025

4794

SWASTIK ELECTRONICS TESTING CENTRE (OPC) PVT. LTD., GHAZIABAD

8163826

IS 302 : Part 2 : SEC 31 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 31 range hoods

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No - 5(GENERAL CONDITIONS FOR THE TESTS)	-	500	-
Clause No - 5.18(linear and angular dimension)	-	500	-
Clause No - 6.2(harmfull ingress of water)	-	1500	-
Clause No - 8.1.1("PROTECTION AGAINST ACCESS TO LIVE PART- test probe B")	-	1000	-
Clause No - 8.1.2("PROTECTION AGAINST ACCESS TO LIVE PART - test probe 13")	-	1000	-
Clause No - 8.2(Addition)	-	1000	-
Clause No - 10.1, Table No. -1(power input deviation)	-	2000	-
Clause No - 13.3("LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE")	-	1500	-
Clause No - 13.3,Table No.- 4(voltage for electrical strength)	-	1500	-
Clause No - 14(Impulse test voltage)	-	2000	-
15(MOISTURE RESISTANCE)	-	1500	-
Clause No - 15.1.1(MOISTURE RESISTANCE)	-	1500	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	2000	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	2000	-
18(ENDURANCE)	-	0	-
Clause No -19.7(test is repeated with the capacitor short circuited)	-	1000	-
Clause No -19.11.4.1(electrostatic discharge)	-	0	-
Clause No -19.11.4.2(radiated field)	-	0	-
Clause No -19.11.4.3(fast transient)	-	0	-
Clause No -19.11.4.4(Voltage dips and interruption)	-	0	-
Clause No -21.1(Mechanical strength)	-	1000	-
Clause No -22.1(construction)	-	2000	-
Clause No -22.11(push force applied)	-	1000	-
Clause No -24.1.2(safety isolating transformer)	-	1000	-
Clause No -24.1.3(for switches)	-	0	-
Clause No -24.1.4(for automatic control)	-	0	-
Clause No -24.1.5(for innterconnection couplers)	-	500	-
Clause No -25.5(dimension for pins)	-	500	-
Clause No -25.8, Table no -11(conductor resistance)	-	1000	-
Clause No -27.6(for circuit board)	-	1000	-
28(SCREWS AND CONNECTIONS)	-	1000	-
Clause No -29.2(comparative tracking index)	-	1000	-
Clause No -29.3.3(dry heat test)	-	1000	-
Clause No -30.2.1(glow wire test)	-	1000	-
Clause No -30.101("incorporate combustible material")	-	1000	-
31(RESISTANCE TO RUSTING)	-	1000	-
Clause No -24.4(plug and socket)	-	500	-
Clause No - 5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-
Clause No - 5.18(linear and angular dimension)	-	0	-
Clause No - 6.2(harmfull ingress of water)	-	0	-
Clause No - 8.1.1("PROTECTION AGAINST ACCESS TO LIVE PART- test probe B")	-	0	-
Clause No - 8.1.2("PROTECTION AGAINST ACCESS TO LIVE PART - test probe 13")	-	0	-
Clause No - 8.2(Addition)	-	0	-
Clause No - 10.1, Table No. -1(power input deviation)	-	0	-
Clause No - 13.3("LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE")	-	0	-
Clause No - 13.3,Table No.- 4(voltage for electrical strength)	-	0	-
Clause No - 14(Impulse test voltage)	-	0	-
15(MOISTURE RESISTANCE)	-	0	-
Clause No - 15.1.1(MOISTURE RESISTANCE)	-	0	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	0	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	0	-
18(ENDURANCE)	-	0	-
Clause No -19.7(test is repeated with the capacitor short circuited)	-	0	-
Clause No -19.11.4.1(electrostatic discharge)	-	0	-
Clause No -19.11.4.2(radiated field)	-	0	-
Clause No -19.11.4.3(fast transient)	-	0	-
Clause No -19.11.4.4(Voltage dips and interruption)	-	0	-
Clause No -21.1(Mechanical strength)	-	0	-
Clause No -22.1(construction)	-	0	-
Clause No -22.11(push force applied)	-	0	-
Clause No -24.1.2(safety isolating transformer)	-	0	-
Clause No -24.1.3(for switches)	-	0	-
Clause No -24.1.4(for automatic control)	-	0	-
Clause No -24.1.5(for innterconnection couplers)	-	0	-
Clause No -25.5(dimension for pins)	-	0	-
Clause No -25.8, Table no -11(conductor resistance)	-	0	-
Clause No -27.6(for circuit board)	-	0	-
28(SCREWS AND CONNECTIONS)	-	0	-
Clause No -29.2(comparative tracking index)	-	0	-
Clause No -29.3.3(dry heat test)	-	0	-
Clause No -30.2.1(glow wire test)	-	0	-
Clause No -30.101("incorporate combustible material")	-	0	-
31(RESISTANCE TO RUSTING)	-	0	-
Clause No -24.4(plug and socket)	-	0	-
Clause No - 5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-
Clause No - 5.18(linear and angular dimension)	-	0	-
Clause No - 6.2(harmfull ingress of water)	-	0	-
Clause No - 8.1.1("PROTECTION AGAINST ACCESS TO LIVE PART- test probe B")	-	0	-
Clause No - 8.1.2("PROTECTION AGAINST ACCESS TO LIVE PART - test probe 13")	-	0	-
Clause No - 8.2(Addition)	-	0	-
Clause No - 10.1, Table No. -1(power input deviation)	-	0	-
Clause No - 13.3("LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE")	-	0	-
Clause No - 13.3,Table No.- 4(voltage for electrical strength)	-	0	-
Clause No - 14(Impulse test voltage)	-	0	-
15(MOISTURE RESISTANCE)	-	0	-
Clause No - 15.1.1(MOISTURE RESISTANCE)	-	0	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	0	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	0	-
18(ENDURANCE)	-	0	-
Clause No -19.7(test is repeated with the capacitor short circuited)	-	0	-
Clause No -19.11.4.1(electrostatic discharge)	-	0	-
Clause No -19.11.4.2(radiated field)	-	0	-
Clause No -19.11.4.3(fast transient)	-	0	-
Clause No -19.11.4.4(Voltage dips and interruption)	-	0	-
Clause No -21.1(Mechanical strength)	-	0	-
Clause No -22.1(construction)	-	0	-
Clause No -22.11(push force applied)	-	0	-
Clause No -24.1.2(safety isolating transformer)	-	0	-
Clause No -24.1.3(for switches)	-	0	-
Clause No -24.1.4(for automatic control)	-	0	-
Clause No -24.1.5(for innterconnection couplers)	-	0	-
Clause No -25.5(dimension for pins)	-	0	-
Clause No -25.8, Table no -11(conductor resistance)	-	0	-
Clause No -27.6(for circuit board)	-	0	-
28(SCREWS AND CONNECTIONS)	-	0	-
Clause No -29.2(comparative tracking index)	-	0	-
Clause No -29.3.3(dry heat test)	-	0	-
Clause No -30.2.1(glow wire test)	-	0	-
Clause No -30.101("incorporate combustible material")	-	0	-
31(RESISTANCE TO RUSTING)	-	0	-
Clause No -24.4(plug and socket)	-	0	-

15 May, 2028

-
Included w.e.f.06.05.2025 Exclusion Clause No -19.11.4.1 to Clause No -19.11.4.4 Clause No -24.1.3 (for switches) Clause No -24.1.4 (for automatic control)

4795

PLANET ANALYSIS PRIVATE LIMITED, KANPUR

9125906

IS 15298 : Part 2 (2024)

Personal Protective Equipment Part 2 Safety Footwear (ISO 20345 : 2021, MOD) (Third Revision)

42000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.2(Design)	-	300	5 % DISCOUNT to BIS Sample only Basic Test Charges Rs. 42000.00 (Mechanical Test- Rs 15000.00, Chemical Test- Rs 27000.00) Additional Parameter Rs. 7500.00 as whole Individual additional parameter as per clause wise
Cl 5.2.2, Table 4(" Height of upper ")	-	200	5 % DISCOUNT to BIS Sample only Basic Test Charges Rs. 42000.00 (Mechanical Test- Rs 15000.00, Chemical Test- Rs 27000.00) Additional Parameter Rs. 7500.00 as whole Individual additional parameter as per clause wise
Cl 5.2.3(Heel area)	-	200	-
Cl 5.3.1.1(Construction of whole footwear)	-	300	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	600	-
Cl 5.3.2.1(Toe protection - general)	-	300	-
Cl 5.3.2.2(Internal length)	-	200	-
Cl 5.3.2.3(Width of toecap flange)	-	200	-
Cl 5.3.2.4.1(Corrosion resistance of Class I footwear and hybrid mounted footwear)	-	500	-
Cl 5.3.2.4.2(Corrosion resistance of Class II and hybrid moulded footwear)	-	500	-
Cl 5.3.2.5(Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-	500	-
Cl 5.3.2.6(Impact resistance)	-	600	-
Cl 5.3.2.7(Compression resistance)	-	600	-
Cl 5.3.3(Leak proofness)	-	500	-
Cl 5.3.4("Specific ergonomic features ")	-	500	-
Cl 5.3.5.2, Table 7(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	1500	-
Cl 5.3.6, Table no 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	2500	-
Cl 5.3.6, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl 5.3.6, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl 5.3.6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	2000	-
Cl 5.3.6, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	2500	-
Cl 5.3.6, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	3000	-
Cl 5.3.6, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	3000	-
Cl 5.3.6, Table no 1 of IS 17011 (x)(pH)	-	500	-
Cl 5.3.6, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	4000	-
Cl 5.3.6, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	1500	-
Cl 5.3.7(Seam strength)	-	500	-
Cl 5.3.8(Lead Content ( National Annex A))	-	1000	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	300	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	300	-
Cl 5.4.2(Thickness)	-	300	-
Cl 5.4.3(Tear strength)	-	500	-
Cl 5.4.4, Table 11(Tensile properties- Tensile strength)	-	500	-
Cl 5.4.4, Table 11(Tensile properties- Breaking Force)	-	500	-
Cl 5.4.4, Table 11(Tensile properties-Modulus at 100 % elongation)	-	500	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	250	-
Cl 5.4.5(Flexing resistance)	-	750	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	800	-
Cl 5.4.7(Resistance to hydrolysis)	-	2000	-
Cl 5.5.2(Lining- Tear strength)	-	500	-
Cl 5.5.3(Lining- Abrasion resistance)	-	1000	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	800	-
Cl 5.6.2, Table 14(Tear strength of tongue)	-	500	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	300	-
Cl 5.7.2(Water permeability of insock)	-	500	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	600	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	1000	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	1000	-
Cl 5.8.2.1, Table 15(Thickness of Outsole)	-	300	-
Cl 5.8.2.2(Cleated area)	-	300	-
Cl 5.8.2.3(Cleat height)	-	300	-
Cl 5.8.3(Outsole- Tear strength)	-	500	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	800	-
Cl 5.8.5(Outsole-Flexing resistance)	-	800	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	1500	-
Cl 5.8.7(Interlayer bond strength)	-	600	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	500	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	500	-
Personal protective equipment: Part 2 safety footwear(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	500	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	300	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	300	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	1000	-
Cl 6.2.1.4.2.1(Corrosion resistance of perforation resistant metallic insert for Class I footwear and hybrid mounted footwear)	-	500	-
Cl 6.2.1.4.2.2(Corrosion resistance of perforation resistant metallic insert for Class II footwear and hybrid moulded footwear)	-	500	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	500	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	1000	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	1000	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	500	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	800	-
Cl 6.2.4(Energy absorption of seat region)	-	500	-
Cl 6.2.5(Water resistance)	-	500	-
Cl 6.2.6.1(Metatarsal protection - Construction)	-	300	-
Cl 6.2.6.2("Metatarsal protection-Impact resistance of metatarsal protective device ")	-	500	-
Cl 6.2.7(Ankle protection)	-	500	-
Cl 6.2.8.2(Cut resistance footwear- design)	-	500	-
Cl 6.2.8.2(Dimensions and construction of protective area of Cut resistance footwear)	-	300	-
Cl 6.2.8.3(Resistance to cutting)	-	500	-
Cl 6.2.9(Scuff cap)	-	600	-
Cl 6.2.10 , Table 19("Slip resistance on ceramic tile floor with glycerine ")	-	1500	-
Cl 6.3(Upper — Water penetration and absorption)	-	800	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	500	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	600	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	800	-
Cl 6.4.3.2(Design of Ladder grip)	-	200	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	300	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	300	-
Cl 7, Table 20("Marking ")	-	0	5 % DISCOUNT to BIS Sample only Basic Test Charges Rs. 42000.00 (Mechanical Test- Rs 15000.00, Chemical Test- Rs 27000.00) Additional Parameter Rs. 7500.00 as whole Individual additional parameter as per clause wise

20 Jan, 2028

-
-

4796

ACCURATE TEST SOLUTIONS LLP (F21), NOIDA

8141226

IS 302 : Part 2 : Sec 74 (2024)

Household and Similar Electrical Appliancesï¿½Safety Part 2 Particular Requirements Section 74 Portable immersion heaters

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	1000	-
8(Protection against access to live parts)	-	1000	-
10(Power input and current)	-	1000	-
10(Power input and current)	-	1000	-
11(Heating)	-	1000	-
13.1 &13.2(Leakage current test)	-	1000	-
13.1 &13.3(Electric strength test)	-	1000	-
14(Transient overvoltages)	-	1000	-
15(Moisture resistance)	-	1000	-
15.3(Moisture resistance)	-	2500	-
16.1 &16.2(Leakage current test)	-	1000	-
16.1 & 16.3(Electric strength test)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	1000	-
20.1(Stability and mechanical hazards)	-	1000	-
20.2(Stability and mechanical hazards)	-	1000	-
21(Mechanical strength)	-	1000	-
22(Construction)	-	1000	-
23(Internal wiring)	-	1000	-
25("Supply connection and external flexible cords")	-	1000	-
26("Terminals for external conductors")	-	1000	-
27(Provision for earthing)	-	1000	-
28(Screws and connections)	-	1000	-
29("Clearances, creepage distances and solid insulation")	-	1000	-
30(Resistance to heat and fire)	-	1000	-
30.101(Resistance to heat and fire)	-	1000	-
31(Resistance to rusting)	-	1000	-
32("Radiation, toxicity and similar hazards")	-	1000	-

04 Jul, 2027

-
Included w.e.f 11.02.2025 Exclusion : Cl 19.11.4.1 To Cl 19.11.4.8 (EMI/EMC), Cl 24 (Components)

4797

ATCC TEST LABS LLP

8172626

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

49000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12(Charging of metal-ion batteries)	-	4000	-
6(Classification- IS 302-1)	-	1000	-
5(General conditions for the tests)	-	500	-
11.8(Temperature rise)	-	500	-
11.7(Duration corresponding)	-	500	-
11.6(Combined appliances)	-	500	-
11.5(Motor-operated appliances)	-	500	-
11.4(Heating appliances)	-	500	-
8.1.5(Live parts of built-in appliances)	-	500	-
18(Endurance)	-	2000	-
17(Overload protection of transformers and associated circuits)	-	500	-
16(Leakage current and electric strength)	-	500	-
4(General requirement)	-	500	-
32.1(Radiation Toxicity and Similar Hazards)	-	500	-
31(Resistance to Rusting)	-	500	-
30.2(Needle Flame Test)	-	1000	-
30.2(Glow Wire Test)	-	1000	-
30.1(Ball pressure test)	-	1000	-
29(clearance, creepage distances and solid insulation)	-	500	-
28(Screw test and connections)	-	500	-
27.1(Provision for Earthing, IS 302-1)	-	1000	-
26(Terminals for external conductors)	-	500	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
24(Components)	-	500	-
23.1(Internal Wiring, IS 302-1)	-	500	-
22.1(Construction, IS 302-1)	-	500	-
21.1(Mechanical Strength, IS 302-1)	-	500	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	500	-
19(Abnormal Operation)	-	500	-
18(Endurance)	-	500	-
17(Over Load Protection of Transformers and associated circuits)	-	500	-
16.3(Electric Strength (after clause 15 and 16.2))	-	500	-
16.2(Leakage Current (after Clause 15))	-	500	-
16.1(General)	-	500	-
15.3(Humidity Test)	-	500	-
15.2(Spillage Test)	-	500	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	500	-
15.0(Moisture resistance)	-	500	-
14(Transient Over Voltages)	-	500	-
13.3(Electric Strength at operating temperature)	-	500	-
13.2(Leakage current at operating temperature)	-	500	-
13(Leakage current and electric strength at operating temperature)	-	500	-
11.3(Heating)	-	500	-
11.2(General)	-	500	-
11.1(General)	-	500	-
10.2(Current input)	-	1000	-
10.1(Power input)	-	1000	-
9(Starting of motor operation test requirements and tests)	-	500	-
8.1.4(Protection against live parts against protective impedance)	-	500	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	500	-
8.1.2(Protection against live parts in openings)	-	500	-
8.1.1(Protection against live parts in all positions)	-	500	-
7(Marking and instructions)	-	500	-
A.2(Earth continuity test)	-	500	-
Annex C(Ageing test on motors)	-	500	-
Annex D(Thermal motor protectors)	-	500	-
15.2(Moisture resistance)	-	500	-
19.17(Abnormal Operation, IS 302-1)	-	1000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	500	-
21.2(Mechanical Strength, IS 302-1)	-	500	-
21.3(Mechanical Strength, IS 302-1)	-	500	-
22.5(Construction)	-	500	-
22.6(Construction, IS 302-1)	-	500	-
22.11(Construction, IS 302-1)	-	500	-
22.16(Construction)	-	500	-
22.32(Construction, IS 302-1)	-	500	-
22.42(Construction)	-	500	-
23.3(Internal Wiring, IS 302-1)	-	500	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	500	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
26.5(Terminals for external conductors)	-	500	-
27.5(Provision for Earthing, IS 302-1)	-	500	-
28.1(Screws and connections)	-	500	-
22.2(Construction, IS 302-1)	-	500	-
22.3(Construction, IS 302-1)	-	500	-
B.22.4(Construction, IS 302-1)	-	500	-
B.22.5(Construction, IS 302-1)	-	500	-
16.0(General)	-	500	-
12(Charging of metal-ion batteries)	-	4000	-
6(Classification- IS 302-1)	-	1000	-
5(General conditions for the tests)	-	500	-
11.8(Temperature rise)	-	500	-
11.7(Duration corresponding)	-	500	-
11.6(Combined appliances)	-	500	-
11.5(Motor-operated appliances)	-	500	-
11.4(Heating appliances)	-	500	-
8.1.5(Live parts of built-in appliances)	-	500	-
18(Endurance)	-	2000	-
17(Overload protection of transformers and associated circuits)	-	500	-
16(Leakage current and electric strength)	-	500	-
4(General requirement)	-	500	-
32.1(Radiation Toxicity and Similar Hazards)	-	500	-
31(Resistance to Rusting)	-	500	-
30.2(Needle Flame Test)	-	1000	-
30.2(Glow Wire Test)	-	1000	-
30.1(Ball pressure test)	-	1000	-
29(clearance, creepage distances and solid insulation)	-	500	-
28(Screw test and connections)	-	500	-
27.1(Provision for Earthing, IS 302-1)	-	1000	-
26(Terminals for external conductors)	-	500	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
23.1(Internal Wiring, IS 302-1)	-	500	-
22.1(Construction, IS 302-1)	-	500	-
21.1(Mechanical Strength, IS 302-1)	-	500	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	500	-
19(Abnormal Operation)	-	500	-
18(Endurance)	-	500	-
17(Over Load Protection of Transformers and associated circuits)	-	500	-
16.3(Electric Strength (after clause 15 and 16.2))	-	500	-
16.2(Leakage Current (after Clause 15))	-	500	-
16.1(General)	-	500	-
15.3(Humidity Test)	-	500	-
15.2(Spillage Test)	-	500	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	500	-
15.0(Moisture resistance)	-	500	-
14(Transient Over Voltages)	-	500	-
13.3(Electric Strength at operating temperature)	-	500	-
13.2(Leakage current at operating temperature)	-	500	-
13(Leakage current and electric strength at operating temperature)	-	500	-
11.3(Heating)	-	500	-
11.2(General)	-	500	-
11.1(General)	-	500	-
10.2(Current input)	-	1000	-
10.1(Power input)	-	1000	-
9(Starting of motor operation test requirements and tests)	-	500	-
8.1.4(Protection against live parts against protective impedance)	-	500	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	500	-
8.1.2(Protection against live parts in openings)	-	500	-
8.1.1(Protection against live parts in all positions)	-	500	-
7(Marking and instructions)	-	500	-
A.2(Earth continuity test)	-	500	-
Annex C(Ageing test on motors)	-	500	-
Annex D(Thermal motor protectors)	-	500	-
15.2(Moisture resistance)	-	500	-
19.17(Abnormal Operation, IS 302-1)	-	1000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	500	-
21.2(Mechanical Strength, IS 302-1)	-	500	-
21.3(Mechanical Strength, IS 302-1)	-	500	-
22.5(Construction)	-	500	-
22.6(Construction, IS 302-1)	-	500	-
22.11(Construction, IS 302-1)	-	500	-
22.16(Construction)	-	500	-
22.32(Construction, IS 302-1)	-	500	-
22.42(Construction)	-	500	-
23.3(Internal Wiring, IS 302-1)	-	500	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	500	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
26.5(Terminals for external conductors)	-	500	-
27.5(Provision for Earthing, IS 302-1)	-	500	-
28.1(Screws and connections)	-	500	-
22.2(Construction, IS 302-1)	-	500	-
22.3(Construction, IS 302-1)	-	500	-
B.22.4(Construction, IS 302-1)	-	500	-
B.22.5(Construction, IS 302-1)	-	500	-
16.0(General)	-	500	-

15 Jun, 2026

-
included .w.e.f. 24.02.2025 EXCLUSION CL 19.11.4.1 (Electrostatic discharges) CL 19.11.4.2 (Radiated fields), 19.11.4.3 (Fast transient bursts), 19.11.4.4 (Surge immunity test), CL 19.11.4.5 (Immunity to conducted discharges) CL 19.11.4.6 (Class 3 Voltage dips and interruptions), 24 (Components) "Domestic Electric Clothes Washing Machines (For testing charges please refer part 2 standard in LIMS)"

4798

WELL TECH TEST AND RESEARCH CENTER, DERABASSI

9177306

IS 3589 (2001)

Steel pipes for water and sewage (168.3 To 2540 Mm Outside Diameter) - Specification (Third Revision)

STEEL GRADE Fe 33 TO Fe450, SEAMLESS/WELDED, TABLE 2 AND OD 168.3 TO 610 MM

9950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1 Table 2 Table 3(Carbon Content IS 228)	-	500	-
8.1 Table 2 Table 3(Carbon Content IS 228)	-	500	-
8.1 Table 2 Table 3(Carbon Content IS 228)	-	500	-
8.1 Table 2 Table 3(Manganese Content IS 228)	-	500	-
8.1 Table 2 Table 3(Manganese Content IS 228)	-	500	-
8.1 Table 2 Table 3(Manganese Content IS 228)	-	500	-
8.1 Table 2 Table 3(Phosphorus Content IS 228)	-	500	-
8.1 Table 2 Table 3(Sulphur Content IS 228)	-	500	-
9.3(Guided bend test(For SAW Pipes))	-	1500	-
10(Hydaulic pressure test)	-	1500	-
11.1, Table 5.(Outside Diameter (OD))	-	1000	-
11.1, Table 5.(Thickness)	-	500	-
11.1, Table 5.(Mass)	-	1000	-
12.3.3(Ovality)	-	1000	-
12.5(Strightness)	-	500	-
14.1(Visual inspection, Appearance and Workmanship)	-	500	-
14.2(Visual inspection, Appearance and Workmanship)	-	500	-
14.3(Visual inspection, Appearance and Workmanship)	-	500	-
14.4(Visual inspection, Appearance and Workmanship-Dent Depth(below 610 mm OD))	-	500	-
14.4(Visual inspection, Appearance and Workmanship-Dent Length)	-	500	-
14.4(Visual inspection, Appearance and Workmanship-Dent Length)	-	500	-
8.1(CE)	-	500	-
8.1(CE)	-	500	-
8.1(CE)	-	500	-
9.3(Guided Bend Test (for SAW Pipes))	-	1500	-
9.2.3(Flattening Test for seamless pipes)	-	1500	-
9.2.1(Flattening test for ERW pipes )	-	1000	-
9.1(Tensile test-Yield Strength)	-	1500	-
9.1(Tensile test-Strength)	-	1000	-
9.1(Tensile test- Elongation)	-	1000	-
18(Marking)	-	500	-
18(Marking)	-	500	-

30 Mar, 2027

-
Included w.e.f.07.07.2025 Remarks: Scope restricted upto 610mm. Exclusion: Hydraulic pressure test

4799

MICRO, SMALL & MEDIUM ENTERPRISES - TESTING CENTRE (MSME), KOLKATA

5108204

IS 8794 (1988)

Specification for cast iron detachable joints for use with asbestos cement pressure pipes (First Revision)

Nominal Dia 80-600 MM

6300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1, Table 2(External Dia of AC Pipe(D2))	-	1300	Total charge for Dimension Rs. 1300
6.1, Table 2(Inside diaFlange(DI))	-	1300	Total charge for Dimension Rs. 1300
6.1, Table 2(External Dia at Centre(DEC))	-	1300	Total charge for Dimension Rs. 1300
6.1, Table 2(Collar Width(Wc))	-	1300	Total charge for Dimension Rs. 1300
6.1, Table 2(Thickness(t))	-	1300	Total charge for Dimension Rs. 1300
6.1, Table 2(Radius of Curvature(R))	-	1300	Total charge for Dimension Rs. 1300
6.1, Table 3(Nominal Dia of Bolt(do))	-	1300	Total charge for Dimension Rs. 1300
6.1, Table 3(Minimum prefared length of bolt(L))	-	1300	Total charge for Dimension Rs. 1300
6.1, Table 4(Mass of joints)	-	1300	Total charge for Dimension Rs. 1300

31 Dec, 2026

-
-

4800

MICRO, SMALL & MEDIUM ENTERPRISES - TESTING CENTRE (MSME), KOLKATA

5108204

IS 10500 (2012)

Drinking water - Specification (Second Revision)

(a) Alpha Count, Bq/L (b) Beta Count, Bq/L

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4, Table (4), (i), (a)(Alpha emitters Bq/l, Max)	-	2500		-
4, Table (4), (i), (b)(Beta emitters Bq/l, Max)	-	2500		-

31 Dec, 2026

-
For Alpha and Beta Emitters only

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number