BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

14118 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

4831

MICRO, SMALL & MEDIUM ENTERPRISES - TESTING CENTRE (MSME), KOLKATA

5108204

IS 8329 (2000)

Centrifugally cast (Spun) ductile iron pressure pipes for water, gas and sewage - Specification (Third Revision)

Nominal Dia 80-2000 MM

13700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 10(Hardness & Tensile Test)	-	2500	Test Charge Rs. 1300/- for Hardness Test only as per Cl. 10.2 Test Charge Rs. 1200/- for Tensile Test only as per Cl. 10.1.5
Cl 11(Hydrostatic Test)	-	3800	-
Cl 13(Length, Diameter, Wall Thickness & Ovality)	-	6800	Test Charge Rs. 4400/- for Dimension as per Cl. 13 only + Test Charge Rs. 900/- for Ovality Cl. 15.3 & Rs. 900/- for Straightness Cl. 15.6; and Rs. 600 for Visual Cl. 7.2

31 Dec, 2026

-
-

4832

Ace Test Labs & Metrology Pvt. Ltd., Sonipat

9162826

IS 14257 (2019)

Lead - Acid storage batteries for motor vehicles with light weight and high cranking performance - Specification (First Revision)

660000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Rating)	-	5000	-
6(Capacities, Dimensions, Mass & Layout)	-	5000	-
8(Marking)	-	5000	-
9.3.1(Physical Examination)	-	5000	-
9.3.2(Dimensions and Layout)	-	5000	-
9.3.3(Marking)	-	5000	-
9.3.4(Capacity (5h Rate) Test)	-	250000	-
9.3.5(High Rate Discharge Test)	-	100000	-
9.3.6(Cold Cranking Performance Test (CCA))	-	100000	-
9.3.7(Reserve Capacity Test)	-	100000	-
9.3.8(Charge acceptance test)	-	100000	-
9.3.9(Water Consumption Test)	-	100000	-
9.3.10(Charge Retention Test)	-	100000	-
9.3.11(Light Load Endurance (LLE) Test)	-	100000	-
9.3.12(Life Cycle Test)	-	350000	-
9.3.13(Overcharge Endurance Test)	-	100000	-
9.3.14(Electrolyte Retention Test)	-	100000	-
9.3.15(Vibration Resistance Test)	-	100000	-
9.3.16(Strength of Terminal Test)	-	100000	-
9.3.17(Robustness to Fastening Test)	-	100000	-
9.3.18(Test For Dry-Charged Battery)	-	100000	-
4, Table no. 1(Direct-Current Potentiometers Third Revision)	-	10000	-
5(RATING)	-	5000	-
6, Table no. 2(CAPACITIES, DIMENSIONS, MASS AND LAYOUT)	-	5000	-
7(CHARGING)	-	150000	-
8(MARKING)	-	5000	-
5(Rating)	-	5000	-
6(Capacities, Dimensions, Mass & Layout)	-	150000	-
8(Marking)	-	5000	-
9.3.1(Physical Examination)	-	10000	-
9.3.2(Dimensions and Layout)	-	10000	-
9.3.3(Marking)	-	5000	-
9.3.4(Capacity (5h Rate) Test)	-	150000	-
9.3.5(High Rate Discharge Test)	-	100000	-
9.3.6(Cold Cranking Performance Test (CCA))	-	100000	-
9.3.7(Reserve Capacity Test)	-	100000	-
9.3.8(Charge acceptance test)	-	100000	-
9.3.9(Water Consumption Test)	-	50000	-
9.3.10(Charge Retention Test)	-	100000	-
9.3.11(Light Load Endurance (LLE) Test)	-	80000	-
9.3.12(Life Cycle Test)	-	350000	-
9.3.13(Overcharge Endurance Test)	-	100000	-
9.3.14(Electrolyte Retention Test)	-	100000	-
9.3.15(Vibration Resistance Test)	-	85000	-
9.3.16(Strength of Terminal Test)	-	80000	-
9.3.17(Robustness to Fastening Test)	-	80000	-
9.3.18(Test For Dry-Charged Battery)	-	50000	-
4, Table no. 1(Direct-Current Potentiometers Third Revision)	-	5000	-
5(RATING)	-	5000	-
6, Table no. 2(CAPACITIES, DIMENSIONS, MASS AND LAYOUT)	-	5000	-
7(CHARGING)	-	5000	-
8(MARKING)	-	5000	-

14 Nov, 2027

-
Included w.e.f 05.05.2025

4833

Ace Test Labs & Metrology Pvt. Ltd., Sonipat

9162826

IS 13369 (1992)

Stationary lead - Acid batteries (With Tubular Positive Plates) in monobloc container - Specification

350000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 11.2(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
Cl. 11.4(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
Cl. 11.4(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
Cl. 11.5(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
Cl. 11.8(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
Cl. 11.6(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
Cl. 11.7(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
Cl. 11.9(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
Cl. 11.10(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
5(MATERIALS )	-	5000	-
6(CONSTRUCTIONAL REQUIREMENTS)	-	5000	-
7(CAPACITY AND DIMENSIONS)	-	10000	-
8(MARKING AND PACKING)	-	10000	-
10(GENERAL REQUIREMENTS FOR TESTS)	-	5000	-
11(TESTS)	-	150000	-
Cl. 11.2(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
Cl. 11.4(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
Cl. 11.4(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
Cl. 11.5(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
Cl. 11.8(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
Cl. 11.6(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
Cl. 11.7(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
Cl. 11.9(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
Cl. 11.10(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
5(MATERIALS )	-	5000	-
6(CONSTRUCTIONAL REQUIREMENTS)	-	5000	-
7(CAPACITY AND DIMENSIONS)	-	5000	-
8(MARKING AND PACKING)	-	5000	-
10(GENERAL REQUIREMENTS FOR TESTS)	-	5000	-
11(TESTS)	-	50000	-

14 Nov, 2027

-
Included w.e.f 05.05.2025

4834

MICRO, SMALL & MEDIUM ENTERPRISES - TESTING CENTRE (MSME), KOLKATA

5108204

IS 418 (2004)

Tungsten filament lamps for domestic and similar general lighting purposes (Fourth Revision)

Lamp Rating : Upto 25 W, 40 W, 60 W, 100 W & 200 W

69375 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Lamp Dimensions, IS 418:2004)	-	1000	Total charge for GLS lamp testing as per IS-418 & IS 15518(Part 1) Safety i) upto 25W Total Rs.30,000/- ii) upto 40W Total Rs.37,500/- iii) upto 60W Total Rs. 46,875/- iv) upto 100W Total Rs.69,375/- v) upto 200W Total Rs. 1,25,000/-
7.2(Lamp Dimensions, IS 418:2004)	-	1000	Total charge for GLS lamp testing as per IS-418 & IS 15518(Part 1) Safety i) upto 25W Total Rs.30,000/- ii) upto 40W Total Rs.37,500/- iii) upto 60W Total Rs. 46,875/- iv) upto 100W Total Rs.69,375/- v) upto 200W Total Rs. 1,25,000/-
8.1(Wattage, IS 418)	-	2500	Total charge for GLS lamp testing as per IS-418 & IS 15518(Part 1) Safety i) upto 25W Total Rs.30,000/- ii) upto 40W Total Rs.37,500/- iii) upto 60W Total Rs. 46,875/- iv) upto 100W Total Rs.69,375/- v) upto 200W Total Rs. 1,25,000/-
8.2.1(Luminous Flux Initial, IS 418)	-	2500	Total charge for GLS lamp testing as per IS-418 & IS 15518(Part 1) Safety i) upto 25W Total Rs.30,000/- ii) upto 40W Total Rs.37,500/- iii) upto 60W Total Rs. 46,875/- iv) upto 100W Total Rs.69,375/- v) upto 200W Total Rs. 1,25,000/-
8.2.2(Luminous Flux Initial, IS 418)	-	2500	Total charge for GLS lamp testing as per IS-418 & IS 15518(Part 1) Safety i) upto 25W Total Rs.30,000/- ii) upto 40W Total Rs.37,500/- iii) upto 60W Total Rs. 46,875/- iv) upto 100W Total Rs.69,375/- v) upto 200W Total Rs. 1,25,000/-
9(Lumen Maintenance, IS 418)	-	8500	Total charge for GLS lamp testing as per IS-418 & IS 15518(Part 1) Safety i) upto 25W Total Rs.30,000/- ii) upto 40W Total Rs.37,500/- iii) upto 60W Total Rs. 46,875/- iv) upto 100W Total Rs.69,375/- v) upto 200W Total Rs. 1,25,000/-
10.1(Life Test Requirements, IS 418)	-	8500	Total charge for GLS lamp testing as per IS-418 & IS 15518(Part 1) Safety i) upto 25W Total Rs.30,000/- ii) upto 40W Total Rs.37,500/- iii) upto 60W Total Rs. 46,875/- iv) upto 100W Total Rs.69,375/- v) upto 200W Total Rs. 1,25,000/-
10.2(Life Test Requirements, IS 418)	-	8500	Total charge for GLS lamp testing as per IS-418 & IS 15518(Part 1) Safety i) upto 25W Total Rs.30,000/- ii) upto 40W Total Rs.37,500/- iii) upto 60W Total Rs. 46,875/- iv) upto 100W Total Rs.69,375/- v) upto 200W Total Rs. 1,25,000/-
6(Marking, IS 418)	-	500	Total charge for GLS lamp testing as per IS-418 & IS 15518(Part 1) Safety i) upto 25W Total Rs.30,000/- ii) upto 40W Total Rs.37,500/- iii) upto 60W Total Rs. 46,875/- iv) upto 100W Total Rs.69,375/- v) upto 200W Total Rs. 1,25,000/-

31 Dec, 2026

-
-

4835

Ace Test Labs & Metrology Pvt. Ltd., Sonipat

9162826

IS 15549 (2005)

Stationary valve regulated lead acid batteries - Specification

218000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.1(Endurance Life Cycle Test)	-	50000	-
12.9 & Annex C(Test for Oxygen Recombination Efficiency)	-	5000	-
12.8(Test for Vent Seal Operation)	-	5000	-
12.7 & Annex B(Test on Separators)	-	50000	-
12.6(Test for Retention of Charge)	-	50000	-
12.5(Watt Hour Efficiency)	-	50000	-
12.4(Ampere Hour Efficiency)	-	50000	-
12.3(Capacity Test at Other Discharge Rates)	-	100000	-
12.2(Test for C 1 Capacity)	-	100000	-
12.1(Test for C 10 Capacity)	-	100000	-
9(Temperature for Tests)	-	10000	-
8(Markings on Cell)	-	5000	-
7.5(Information to be Furnished by the Battery Supplier)	-	49999.98	-
7.4(Information to be Furnished by Purchaser with Enquiry/Order)	-	5000	-
7.3(Standard Cell Capacities)	-	5000	-
7.2(Designation of Cells)	-	5000	-
7.1(Rating )	-	5000	-
4(MATERIAL AND CONSTRUCTION)	-	5000	-
5(FLAME ARRESTOR)	-	5000	-
6(CHARGERS)	-	5000	-
7(RATING AND DESIGNATION)	-	5000	-
8(MARKINGS ON CELL)	-	5000	-
9(TEMPERATURE FOR TESTS)	-	5000	-
10(CLASSIFICATION OF TESTS)	-	5000	-
11(ACCEPTANCE TESTS)	-	100000	-
12(TESTS PROCEDURES)	-	10000	-
12.1(Endurance Life Cycle Test)	-	150000	-
12.9 & Annex C(Test for Oxygen Recombination Efficiency)	-	100000	-
12.8(Test for Vent Seal Operation)	-	10000	-
12.7 & Annex B(Test on Separators)	-	10000	-
12.6(Test for Retention of Charge)	-	100000	-
12.5(Watt Hour Efficiency)	-	100000	-
12.4(Ampere Hour Efficiency)	-	100000	-
12.3(Capacity Test at Other Discharge Rates)	-	100000	-
12.2(Test for C 1 Capacity)	-	100000	-
12.1(Test for C 10 Capacity)	-	100000	-
9(Temperature for Tests)	-	50000	-
8(Markings on Cell)	-	5000	-
7.5(Information to be Furnished by the Battery Supplier)	-	5000	-
7.4(Information to be Furnished by Purchaser with Enquiry/Order)	-	5000	-
7.3(Standard Cell Capacities)	-	5000	-
7.2(Designation of Cells)	-	5000	-
7.1(Rating )	-	5000	-
4(MATERIAL AND CONSTRUCTION)	-	5000	-
5(FLAME ARRESTOR)	-	5000	-
6(CHARGERS)	-	5000	-
7(RATING AND DESIGNATION)	-	5000	-
8(MARKINGS ON CELL)	-	5000	-
9(TEMPERATURE FOR TESTS)	-	50000	-
10(CLASSIFICATION OF TESTS)	-	5000	-
11(ACCEPTANCE TESTS)	-	100000	-
12(TESTS PROCEDURES)	-	5000	-

14 Nov, 2027

-
Included w.e.f 05.05.2025

4836

MICRO, SMALL & MEDIUM ENTERPRISES - TESTING CENTRE (MSME), KOLKATA

5108204

IS 1783 : Part 2 (2014)

Drums large, fixed ends - Specification: Part 2 grade B drums (Fourth Revision)

All

14400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Material)	-	5000	-
4(Capacity)	-	600	-
5(Dimensions (Type 1 C Drums Figure 1))	-	1900	Total charge for Dimension Rs 1900/-
5(Dimensions (Type 1 D Drums Figure 1))	-	1900	Total charge for Dimension Rs 1900/-
5(Dimensions (Type 1 C Drums Figure 2))	-	1900	Total charge for Dimension Rs 1900/-
5(Dimensions (Type 1 D Drums Figure 2))	-	1900	Total charge for Dimension Rs 1900/-
7(Construction)	-	600	-
7.1(Construction)	-	600	-
7.2(Construction)	-	600	-
7.3(Construction)	-	600	-
7.4(Construction)	-	600	-
7.5(Construction)	-	600	-
7.7(Construction)	-	600	Total charge for Cl. 7 Construction is Rs. 600/-
8(Finish )	-	600	-
9.1(Leakage at air pressure )	-	1300	-
9.2(Drop Test)	-	2500	-
9.3(Hydraulic Pressure Test)	-	1300	-
5(Dimensions (Type 2 C Drums Figure 2))	-	1900	Total charge for Dimension Rs 1900/-
5(Dimensions (Type 2 D Drums Figure 2))	-	1900	Total charge for Dimension Rs 1900/-

31 Dec, 2026

-
-

4837

MICRO, SMALL & MEDIUM ENTERPRISES - TESTING CENTRE (MSME), KOLKATA

5108204

IS 1537 (1976)

Specification for vertically cast iron pressure pipes for water, gas and sewage (First Revision)

Size-Nominal Diameter 80- 1500

11300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1 to 10.6(Coating )	-	2000	-
3.1 , 6 of IS 210( The composition of cast iron shall be left to the discretion of the manufacturer)	-	600	-
4.1(Tensile Strength)	-	2500	Cl 4.1 + 4.2
4.2(Hardness test)	-	2500	Cl 4.1 + 4.2
6.1(Hydrostatic test)	-	2500	-
7.1 & Table 2(DE)	-	3100	Total Total charge for Dimension as per Cl 7 Rs. 3100/-
7.1 & Table 2(DI)	-	3100	-
7.1 & Table 2(P)	-	3100	-
7.1 & Table 2(g)	-	3100	-
7.1 & Table 2(h)	-	3100	-
7.1 & Table 2(DC)	-	3100	-
7.1 & Table 2(c)	-	3100	-
7.1 & Table 2(f)	-	3100	-
7.1 & Table 3(DI)	-	3100	-
7.1 & Table 3(P)	-	3100	-
7.1 & Table 3(g)	-	3100	-
7.1 & Table 3(h)	-	3100	-
7.1 & Table 4(D)	-	3100	-
7.1 & Table 4(a)	-	3100	-
7.1 & Table 4(b)	-	3100	-
7.1 & Table 4(s)	-	3100	-
7.1 & Table 4(r)	-	3100	-
7.1 & Table 5(D)	-	3100	-
7.1 & Table 5(C)	-	3100	-
7.1 & Table 5(Holes Number)	-	3100	-
7.1 & Table 5(Holes Diameter)	-	3100	-
7.1 & Table 5(Diameter of Bolts)	-	3100	-
7.1 & Table 6 to 8(DE)	-	3100	-
7.1 & Table 6 to 8(t)	-	3100	-
7.1 & Table 6 to 8(Mass of one meter barrel (Approx))	-	3100	-
7.1 & Table 6 to 8(Socket mass (Approx))	-	3100	-
7.1 & Table 6 to 8(Total mass for one working length in meter)	-	3100	-
8.4(Permissible deviation from a straight line)	-	3100	-
9.1,Table 9(DE)	-	3100	-
9.1,Table 9(e)	-	3100	-
9.1,Table 9(Flange, Mass of one meter (Approx))	-	3100	-
9.1,Table 9(Mass of one flange (Approx))	-	3100	-
9.1,Table 9(Working Length)	-	3100	-

31 Dec, 2026

-
Cl 6.1 Housing test (Hydrostatic test upto 300mm. Above 300mm test can be carried at unit premises)

4838

MICRO, SMALL & MEDIUM ENTERPRISES - TESTING CENTRE (MSME), KOLKATA

5108204

IS 1038 (1983)

Specification For Steel Doors, Windows And Ventilators

All size as per IS

6800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.1.1(Visual Inspection Test)	-	2500	-
6.1.1.2(Macro Examination)	-	1400	-
6.1.1.3(Micro Examination)	-	1000	-
5(Material-Rolled Steel Section)	-	1900	Total Charge for Dimension Test Rs. 1900/-
5(Material-Coupling Section)	-	1900	Total Charge for Dimension Test Rs. 1900/-
5(Material-Glass Panels)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.1(Frames)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.1.1.4(Fillet Weld Test)	-	1000	-
6.2(Side Hung Shutter)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2(Side Hung Shutter- Thickness of hinge)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2(Side Hung Shutter- Pin diameter)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2(Side Hung Shutter-Width of hinge)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.2 & 6.2.2.1(Handle and Handle Plate-Material of handel )	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.2 & 6.2.2.1(Handle and Handle Plate-Material of handel plate)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.2 & 6.2.2.1(Handle and Handle Plate)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.2 & 6.2.2.1(Handle and Handle Plate-Height of handle plate)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.3(Peg Stay - Material)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.3(Peg Stay - Thickness)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.3(Peg Stay - Dimensions-A)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.3(Peg Stay - Dimensions-B)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.3(Peg Stay - Dimensions-C)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.3(Peg Stay - Dimensions-D)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.3(Peg Stay - Dimensions-E)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.3(Peg Stay - Dimensions-F)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.3(Peg Stay - Dimensions-G)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.3(Peg Stay - Dimensions-H)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.3(Peg Stay - Dimensions-J)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.3(Peg Stay - Dimensions-K)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.3(Peg Stay - Dimensions-L)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.3(Peg Stay - Dimensions-M)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.3(Top Hung Ventilator)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.3(Top Hung Ventilator-Thickness of hinge)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.3(Top Hung Ventilator-Pin diameter)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.3(Top Hung Ventilator-Width of hinge)	-	1900	Total Charge for Dimension Test Rs. 1900/-
7.1(Position of Holes)	-	1900	Total Charge for Dimension Test Rs. 1900/-
7.2 Table 2(Position of Fixing Screws)	-	1900	Total Charge for Dimension Test Rs. 1900/-
7.2 Table 2(Lugs-A)	-	1900	Total Charge for Dimension Test Rs. 1900/-
7.2 Table 2(Lugs-B)	-	1900	Total Charge for Dimension Test Rs. 1900/-
7.2 Table 2(Lugs-C)	-	1900	Total Charge for Dimension Test Rs. 1900/-
7.2 Table 2(Lugs-D)	-	1900	Total Charge for Dimension Test Rs. 1900/-
7.2 Table 2(Lugs-E)	-	1900	Total Charge for Dimension Test Rs. 1900/-
7.2 Table 2(Lugs-F)	-	1900	Total Charge for Dimension Test Rs. 1900/-
7.2 Table 2(Lugs-G)	-	1900	Total Charge for Dimension Test Rs. 1900/-

31 Dec, 2026

-
-

4839

MICRO, SMALL & MEDIUM ENTERPRISES - TESTING CENTRE (MSME), KOLKATA

5108204

IS 1785 : Part 2 (1983)

Specification for plain hard drawn steel wire for prestressed concrete: Part 2 as - Drawn wire (First Revision)

All

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1.1(PHOSPHORUS)	-	5000	-
3.1.1(SULPHUR)	-	5000	-
Clause 3.4(Surface Finish)	-	1000	-
Cl 5.1(Diameter)	-	1300	-
Cl 6.1(Tensile Test On UTM)	-	1200	-
Cl 6.2(Tensile Test On UTM)	-	1200	-
Cl. 7.4(0.2 % Proof Stress )	-	1563	-
Cl. 7.5(Ductility/ Reverse Bend Test)	-	1600	-

31 Dec, 2026

-
-

4840

MICRO, SMALL & MEDIUM ENTERPRISES - TESTING CENTRE (MSME), KOLKATA

5108204

IS 6701 (1985)

Specification for tungsten filament miscellaneous electric lamps (First Revision)

Upto 15W

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 3 of IS 6701:1985(REQUIREMENTS FOR MECHANICAL AND PHYSICAL CHARACTERISTICS)	-	6500	-
Cl 5 of IS 6701:1985(MARKING)	-	500	-
6.2.1(Wattage)	-	2500	-
6.2.1(Lumens)	-	2500	-
6.2.2(Average Life)	-	3000	-

31 Dec, 2026

-
-

4841

MICRO, SMALL & MEDIUM ENTERPRISES - TESTING CENTRE (MSME), KOLKATA

5108204

IS 4038 (1986)

Foot Valves For Water Works Purposes

Size- 25, 32, 40, 50, 65, 80, 100, 125, 150, 200, 250,

9400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Coating)	-	5000	-
4.1(MANUFACTURE-Type)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.2(MANUFACTURE)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.3(MANUFACTURE- Housings)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.4(MANUFACTURE- Flanges)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.4.2-Table 2(MANUFACTURE- Flanges-DIMENSIONS AND DRILLING OF FLANGES-Size)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.4.2-Table 2(MANUFACTURE- Flanges-DIMENSIONS AND DRILLING OF FLANGES-D)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.4.2-Table 2(MANUFACTURE- Flanges-DIMENSIONS AND DRILLING OF FLANGES-Rhickness of flange)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.4.2-Table 2(MANUFACTURE- Flanges-DIMENSIONS AND DRILLING OF FLANGES-C)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.4.2-Table 2(MANUFACTURE- Flanges-DIMENSIONS AND DRILLING OF FLANGES-A)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.4.2-Table 2(MANUFACTURE- Flanges-DIMENSIONS AND DRILLING OF FLANGES-d)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.4.2-Table 2(MANUFACTURE- Flanges-DIMENSIONS AND DRILLING OF FLANGES-Dia of bolt)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.5(MANUFACTURE- Screwed Ends-screwed-ends Polygon side)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.5(MANUFACTURE- Screwed Ends-screwed)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.5-Table 3(MANUFACTURE- Screwed Ends-screwed-DIMENSIONS OF SCREWED-END FOOT VALVES-Nominal Size)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.5-Table 3(MANUFACTURE- Screwed Ends-screwed-DIMENSIONS OF SCREWED-END FOOT VALVES-L)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.5.1-Table 3(MANUFACTURE- Screwed Ends-screwed-DIMENSIONS OF SCREWED-END FOOT VALVES-H)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.5.2-Table 4(MANUFACTURE- Screwed Ends-screwed-DIMENSIONS OF SCREWED-END FOOT VALVES-Nominal size)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.5.2-Table 4(MANUFACTURE- Screwed Ends-screwed-DIMENSIONS OF SCREWED-END FOOT VALVES-D)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.6(MANUFACTURE- Strainers )	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.6(MANUFACTURE- Strainers -Thickness)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.6-Table 5(MANUFACTURE- Strainers -DIMENSIONS OF STRAINER HOLES -Nominal Size)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.6-Table 5(MANUFACTURE- Strainers -DIMENSIONS OF STRAINER HOLES -Maximum dia of Hole(Ciecular))	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.6-Table 5(MANUFACTURE- Strainers -DIMENSIONS OF STRAINER HOLES -MAXIMUM VALUE FOR THE Small dimension of the hole(Non-circular))	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.7(MANUFACTURE-Bolts and Nuts-)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
6.1.1(Seat Test)	-	2500	Total charge for Hydraulic Test is Rs, 2500/-
6.1.2(Housing Test)	-	2500	Total charge for Hydraulic Test is Rs, 2500/-

31 Dec, 2026

-
Cl 6.1.2 Housing test (Hydrostatic test upto 300mm. Above 300mm test can be carried at unit premises)

4842

MICRO, SMALL & MEDIUM ENTERPRISES - TESTING CENTRE (MSME), KOLKATA

5108204

IS 7181 (1986)

Specification for horizontally cast iron double flanged pipes for water, gas and sewage (First Revision)

All

5400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Manufacture)	-	600	-
3.3(Manufacture)	-	600	-
3.4(Manufacture)	-	600	-
6.1(Hydrostatic Test)	-	1900	-
7.1(Sizes and Mass)	-	2300	-
7.2(Sizes and Mass)	-	2300	-
7.3(Sizes and Mass)	-	2900	Cl. 7.0, 7.1, 7.2, 7.3, 8 Dimensional Verification 2300.00 Cl. 7.3, 8 Weight Measurement 600.00
7.4(Sizes and Mass Dimensions of Flange)	-	0	-
5.1(Tensile Test)	-	0	-

31 Dec, 2026

-
Hydrostatic test upto 300mm. Above 300mm test can be carried at unit premises

4843

MICRO, SMALL & MEDIUM ENTERPRISES - TESTING CENTRE (MSME), KOLKATA

5108204

IS 6528 (1995)

Stainless steel wire - Specification (First Revision)

All

13900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Nitrogen)	-	5000	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Titanium)	-	5000	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Vanadium)	-	5000	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Boron)	-	5000	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Molybdenum)	-	5000	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Nickel)	-	5000	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Chromium)	-	5000	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Aluminium)	-	5000	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Silicon)	-	5000	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Manganese)	-	5000	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Phosphorous)	-	5000	--
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Sulphor)	-	5000	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Carbon)	-	5000	-
Cl 6(Workmanship)	-	600	-
15(Corrosion Resistance - IS:10461)	-	0	-
Cl 9.1 & Table 3(Diameter & Out Of Round)	-	1300	-
Cl 10(UTM)	-	2700	Tensile Strength & Elongation Percent 1200.00 Yield Strength 875.00 Reduction Percent 625.00
10.2(Reverse bend test-IS 1716)	-	1600	-
10.3(Torsion test- IS 1717)	-	1200	-
10.4(Wrapping test-IS 1755)	-	900	-

31 Dec, 2026

-
-

4844

MICRO, SMALL & MEDIUM ENTERPRISES - TESTING CENTRE (MSME), KOLKATA

5108204

IS 3975 (1999)

Low carbon galvanized steel wires, formed wires and tapes for armouring of cables - Specification (Third Revision)

Upto 300 Sq. mm Cable Size

11700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Dimensions)	-	1000	Rs. 4750 /- for Electrical test charge only
8.1(Mechanical Properties (as per table 5 of IS 1608))	-	1200	-
8.2(Mechanical Properties (as per IS 1717))	-	1200	-
8.3(Mechanical Properties (as per IS 1755))	-	1200	-
8.4(Mechanical Properties (as per IS 10810(Part- 42)))	-	3750	Electrical Resistance Test
9.1(Galvanizing Requirements )	-	1000	-
Clause 6.1, Table-1(Sulphur)	-	5000	-
Clause 6.1, Table-1(Phosphorus)	-	5000	-
6.2(Phosphorus %)	-	5000	-
6.2(Sulphur %)	-	5000	-
6.2( Nitrogen%)	-	5000	-
9.2(Galvanizing Requirements )	-	1000	-
11(Freedom from defects)	-	600	--
7(Dimensions)	-	1300	For Mechanical part
14(Marking)	-	600	-

31 Dec, 2026

-
-

4845

Amit Test and Calibration Centre (8172006)

8172006

IS 7098 : Part 2 (2011)

Crosslinked polyethylene insulated thermoplastic sheathed cables - Specification: Part 2 for working voltages from 3.3 kV up to and including 33 kV (Second Revision)

185000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(CONDUCTOR)	-	200	-
4.1.1(CONDUCTOR)	-	200	-
5(INSULATION)	-	200	-
6(SCREENING)	-	200	-
6.1.1(SCREENING : - Non-metallic — Semiconducting Compound)	-	200	-
6.1.2(SCREENING : - Non-magnetic Metallic Tape for Single Core Unscreened and Unarmoured Cables)	-	200	-
7(FILLERS AND INNER SHEATH)	-	200	-
8.1(ARMOURING)	-	200	-
8.2(ARMOURING)	-	200	-
9(OUTER SHEATH )	-	200	-
10.1(CONDUCTOR)	-	200	-
10.2(CONDUCTOR)	-	200	-
11(CONDUCTOR SCREENING)	-	200	-
12.1(INSULATION)	-	200	-
12.2(INSULATION : Thickness of Insulation)	-	1000	-
12.3(INSULATION : Tolerance on Thickness of Insulation)	-	500	-
12.4(Eccentricity and Ovality)	-	1000	-
12.5(INSULATION : Application of Insulation)	-	500	-
13.1(INSULATION SCREENING)	-	200	-
13.2(INSULATION SCREENING)	-	200	-
13.3(INSULATION SCREENING)	-	200	-
13.4(INSULATION SCREENING)	-	200	-
14.1(CORE IDENTIFICATION)	-	200	-
14.1.1(CORE IDENTIFICATION)	-	200	-
15.1(LAVING UP OF CORES)	-	200	-
16.1(INNER SHEATH (COMMON COVERING))	-	200	-
16.2(INNER SHEATH (COMMON COVERING))	-	200	-
16.2.1(INNER SHEATH (COMMON COVERING))	-	200	-
16.3(INNER SHEATH (COMMON COVERING) : Thickness of Inner Sheath)	-	1000	-
16.3.1(INNER SHEATH (COMMON COVERING) : Thickness of Inner Sheath)	-	1000	-
17.1(ARMOURING : Application )	-	200	-
17.1.1(ARMOURING )	-	200	-
17.1.2(ARMOURING )	-	200	-
17.1.3(ARMOURING )	-	200	-
17.2.1(ARMOURING : Type of armour )	-	200	-
17.2(ARMOURING : Coverage )	-	500	-
17.3(ARMOURING : Dimension )	-	1000	-
17.4(ARMOURING : Joints)	-	500	-
16.4(ARMOURING : Resistance)	-	2500	-
18.1(OUTER SHEATH)	-	500	-
18.2(OUTER SHEATH: Colour)	-	500	-
18.3(Thicknes of outer sheath : average )	-	1000	-
18.3(Thicknes of outer sheath : minimum )	-	1000	-
19.1 i) a)(Annealing test (for copper))	-	1000	-
19.1 i) b)(Tensile test (for aluminium) - Before stranding )	-	1000	-
19.1 i) b)(Tensile test (for aluminium) - After stranding )	-	1000	-
19.1 i) c)(Wrapping test ( for aluminium))	-	1000	-
19.1 i) d)(Resistance test - Main conductor )	-	5000	-
19.1 i) d)(Resistance test - Neutral conductor )	-	5000	-
19.1 iii) a)(Phyaical tests for insulation : Tensile Test)	-	2500	-
19.1 iii) a)(Phyaical tests for insulation : Elongation )	-	2500	-
19.1 iii) b)(Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	5000	-
19.1 iii) b)(Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	5000	-
19.1 iii) c)(Degree of cross linking )	-	1000	-
19.1 iii) d)(Phyaical tests for insulation : Hot set )	-	2500	-
19.1 iii) d)(Phyaical tests for insulation : Permanent set )	-	2500	-
19.1 iii) e)(Phyaical tests for insulation : Shrinkage )	-	1500	-
19.1 iii) e)(Phyaical tests for insulation : Shrinkage - Crack observed )	-	1500	-
19.1 iii) f)(Insulation: Waterabsorption(gravimetric))	-	7000	-
19.1 v) a)(Test for strippability of semiconducting strippable insulation screen (when applicable))	-	2500	-
19.1 v) b)(Volume resistivity)	-	5000	-
19.1 vi) a)(Physical tests for outer sheath : Tensile stregth )	-	2500	-
19.1 vi) b)(Physical tests for outer sheath -Ageing in air oven : Elongation )	-	5000	-
19.1 vi) b)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	5000	-
19.1 vi) b)(Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	5000	-
19.1 vi) c)(Phyaical tests for Sheath : Shrinkage )	-	1500	-
19.1 vi) c)(Phyaical tests for Sheath : Shrinkage - Crack observed )	-	1500	-
19.1 vi) d)(Sheath : Hot deformation)	-	5000	-
19.1 vi) e)(Loss of massIn air oven)	-	5000	-
19.1 vi) f)(Sheath : Heat shock test)	-	2500	-
19.1 vi) g)(Sheath : Thermalstability)	-	3000	-
19.1 vi) h)(Carbon black content of polythene sheath )	-	3500	-
19.1 vii)(Thermal ageing test for complete cable - Tensile stregth )	-	5000	-
19.1 vii)(Thermal ageing test for complete cable- Elogation )	-	5000	-
19.1 vii)(Thermal ageing test for complete cable- Resistivity )	-	5000	-
19.1 xi)(Insulation resistance test : volume resistivity )	-	3500	-
20.2(Partial discharge test)	-	45000	-
20.3(Bending test)	-	15000	-
20.4(Dielectric power factor test : As a function of voltage)	-	30000	-
20.4(Dielectric power factor test : As a function of temperature)	-	30000	-
20.5(Heating Cycle Test)	-	30000	-
20.6(Impulse withstand test (Rated voltage, kV 3.8/6.6 Impulse voltage, kV 60))	-	45000	-
20.7(High voltage test)	-	25000	-
20.8(Flammability test)	-	5000	-
20.1(Oxygen Index Test)	-	7000	-
20.11(Flame Retardance Test on Single Cables)	-	3000	-
20.12(Flame Retardance Test on Bunched Cables)	-	15000	-
20.13(Test for Halogen Acid Gas Evolution)	-	7000	-
20.14( Test for Smoke Density)	-	25000	-
20.15(Temperature Index)	-	7000	-
21.1(IDENTIFICATION : Manufacturer's Identification)	-	200	-
21.2(IDENTIFICATION : Cable Identification)	-	200	-
21.3(IDENTIFICATION : Cable Code)	-	200	-
20.3 (a)(Partial discharge test (Bending test))	-	45000	-
20.5 (a)(PD test (heating cycle test))	-	30000	-
20.6(Impulse Withstand Test (Rated voltage, kV 6.35/11 Impulse voltage, kV 75))	-	30000	-
20.6(Impulse Withstand Test (Rated voltage, kV 11/11 Impulse voltage, kV 95))	-	30000	-
20.6(Impulse Withstand Test (Rated voltage, kV 12.7/22 Impulse voltage, kV 125))	-	30000	-
20.6(Impulse Withstand Test (Rated voltage, kV 19/33 Impulse voltage, kV 170))	-	30000	-
Cl-20.6(Impulse Withstand Test (Rated voltage, kv 33/33 Impulse voltage , kv 250))	-	30000	-
Cl. 8(Conductor)	-	200	-
Cl. 8(Conductor)	-	200	-
Cl. 8(Conductor)	-	200	-
Cl.8 & 17(Armouring)	-	200	-
Cl. 17.5(Armouring : Resistance of Armour,)	-	2500	-
Cl.8 & 17(Armouring : Tensile Strength)	-	1500	-
Cl.8 & 17(Armouring : Elongation)	-	1500	-
Cl.8 & 17(Armouring : Torsion Test (For Round Steel Wire Only))	-	1500	-
Cl.8 & 17(Armouring: Winding Test ( For formed steel wire only))	-	1500	-
Cl.8 & 17(Armouring : Application)	-	200	-
Cl.8 & 17(Armouring : Uniformity of Zinc Coating)	-	1500	-
Cl.8 & 17(Armouring: Mass of Zinc Coating)	-	1500	-
Cl.8 & 17(Armouring : Resistivity Test)	-	2500	-
Cl.8 & 17(Armouring: Cold Impact Test (For outer Sheath))	-	3500	-
Cl. 13.5.1 and Table 7(Armouring: Resistance Test for Armouring (Other than Mining Cables))	-	2500	-
19.1 vi) a)(Physical tests for outer sheath : Elongation )	-	2500	-
19.1 vi) b)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	5000	-
17.2(ARMOURING : Type of armour )	-	200	-
4.1(CONDUCTOR)	-	-	-
4.1.1(CONDUCTOR)	-	-	-
5(INSULATION)	-	-	-
6(SCREENING)	-	-	-
6.1.1(SCREENING : - Non-metallic — Semiconducting Compound)	-	-	-
6.1.2(SCREENING : - Non-magnetic Metallic Tape for Single Core Unscreened and Unarmoured Cables)	-	-	-
7(FILLERS AND INNER SHEATH)	-	-	-
8.1(ARMOURING)	-	-	-
8.2(ARMOURING)	-	-	-
9(OUTER SHEATH )	-	-	-
10.1(CONDUCTOR)	-	-	-
10.2(CONDUCTOR)	-	-	-
11(CONDUCTOR SCREENING)	-	-	-
12.1(INSULATION)	-	-	-
12.2(INSULATION : Thickness of Insulation)	-	-	-
12.3(INSULATION : Tolerance on Thickness of Insulation)	-	-	-
12.4(Eccentricity and Ovality)	-	-	-
12.5(INSULATION : Application of Insulation)	-	-	-
13.1(INSULATION SCREENING)	-	-	-
13.2(INSULATION SCREENING)	-	-	-
13.3(INSULATION SCREENING)	-	-	-
13.4(INSULATION SCREENING)	-	-	-
14.1(CORE IDENTIFICATION)	-	-	-
14.1.1(CORE IDENTIFICATION)	-	-	-
15.1(LAVING UP OF CORES)	-	-	-
16.1(INNER SHEATH (COMMON COVERING))	-	-	-
16.2(INNER SHEATH (COMMON COVERING))	-	-	-
16.2.1(INNER SHEATH (COMMON COVERING))	-	-	-
16.3(INNER SHEATH (COMMON COVERING) : Thickness of Inner Sheath)	-	-	-
16.3.1(INNER SHEATH (COMMON COVERING) : Thickness of Inner Sheath)	-	-	-
17.1(ARMOURING : Application )	-	-	-
17.1.1(ARMOURING )	-	-	-
17.1.2(ARMOURING )	-	-	-
17.1.3(ARMOURING )	-	-	-
17.2.1(ARMOURING : Type of armour )	-	-	-
17.2(ARMOURING : Coverage )	-	-	-
17.3(ARMOURING : Dimension )	-	-	-
17.4(ARMOURING : Joints)	-	-	-
16.4(ARMOURING : Resistance)	-	-	-
18.1(OUTER SHEATH)	-	-	-
18.2(OUTER SHEATH: Colour)	-	-	-
18.3(Thicknes of outer sheath : average )	-	-	-
18.3(Thicknes of outer sheath : minimum )	-	-	-
19.1 i) a)(Annealing test (for copper))	-	-	-
19.1 i) b)(Tensile test (for aluminium) - Before stranding )	-	-	-
19.1 i) b)(Tensile test (for aluminium) - After stranding )	-	-	-
19.1 i) c)(Wrapping test ( for aluminium))	-	-	-
19.1 i) d)(Resistance test - Main conductor )	-	-	-
19.1 i) d)(Resistance test - Neutral conductor )	-	-	-
19.1 iii) a)(Phyaical tests for insulation : Tensile Test)	-	-	-
19.1 iii) a)(Phyaical tests for insulation : Elongation )	-	-	-
19.1 iii) b)(Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	-	-
19.1 iii) b)(Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	-	-
19.1 iii) c)(Degree of cross linking )	-	-	-
19.1 iii) d)(Phyaical tests for insulation : Hot set )	-	-	-
19.1 iii) d)(Phyaical tests for insulation : Permanent set )	-	-	-
19.1 iii) e)(Phyaical tests for insulation : Shrinkage )	-	-	-
19.1 iii) e)(Phyaical tests for insulation : Shrinkage - Crack observed )	-	-	-
19.1 iii) f)(Insulation: Waterabsorption(gravimetric))	-	-	-
19.1 v) a)(Test for strippability of semiconducting strippable insulation screen (when applicable))	-	-	-
19.1 v) b)(Volume resistivity)	-	-	-
19.1 vi) a)(Physical tests for outer sheath : Tensile stregth )	-	-	-
19.1 vi) b)(Physical tests for outer sheath -Ageing in air oven : Elongation )	-	-	-
19.1 vi) b)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	-	-
19.1 vi) b)(Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	-	-
19.1 vi) c)(Phyaical tests for Sheath : Shrinkage )	-	-	-
19.1 vi) c)(Phyaical tests for Sheath : Shrinkage - Crack observed )	-	-	-
19.1 vi) d)(Sheath : Hot deformation)	-	-	-
19.1 vi) e)(Loss of massIn air oven)	-	-	-
19.1 vi) f)(Sheath : Heat shock test)	-	-	-
19.1 vi) g)(Sheath : Thermalstability)	-	-	-
19.1 vi) h)(Carbon black content of polythene sheath )	-	-	-
19.1 vii)(Thermal ageing test for complete cable - Tensile stregth )	-	-	-
19.1 vii)(Thermal ageing test for complete cable- Elogation )	-	-	-
19.1 vii)(Thermal ageing test for complete cable- Resistivity )	-	-	-
19.1 xi)(Insulation resistance test : volume resistivity )	-	-	-
20.2(Partial discharge test)	-	-	-
20.3(Bending test)	-	-	-
20.4(Dielectric power factor test : As a function of voltage)	-	-	-
20.4(Dielectric power factor test : As a function of temperature)	-	-	-
20.5(Heating Cycle Test)	-	-	-
20.6(Impulse withstand test (Rated voltage, kV 3.8/6.6 Impulse voltage, kV 60))	-	-	-
20.7(High voltage test)	-	-	-
20.8(Flammability test)	-	-	-
20.1(Oxygen Index Test)	-	-	-
20.11(Flame Retardance Test on Single Cables)	-	-	-
20.12(Flame Retardance Test on Bunched Cables)	-	-	-
20.13(Test for Halogen Acid Gas Evolution)	-	-	-
20.14( Test for Smoke Density)	-	-	-
20.15(Temperature Index)	-	-	-
21.1(IDENTIFICATION : Manufacturer's Identification)	-	-	-
21.2(IDENTIFICATION : Cable Identification)	-	-	-
21.3(IDENTIFICATION : Cable Code)	-	-	-
20.3 (a)(Partial discharge test (Bending test))	-	-	-
20.5 (a)(PD test (heating cycle test))	-	-	-
20.6(Impulse Withstand Test (Rated voltage, kV 6.35/11 Impulse voltage, kV 75))	-	-	-
20.6(Impulse Withstand Test (Rated voltage, kV 11/11 Impulse voltage, kV 95))	-	-	-
20.6(Impulse Withstand Test (Rated voltage, kV 12.7/22 Impulse voltage, kV 125))	-	-	-
20.6(Impulse Withstand Test (Rated voltage, kV 19/33 Impulse voltage, kV 170))	-	-	-
Cl-20.6(Impulse Withstand Test (Rated voltage, kv 33/33 Impulse voltage , kv 250))	-	-	-
Cl. 8(Conductor)	-	-	-
Cl. 8(Conductor)	-	-	-
Cl. 8(Conductor)	-	-	-
Cl.8 & 17(Armouring)	-	-	-
Cl. 17.5(Armouring : Resistance of Armour,)	-	-	-
Cl.8 & 17(Armouring : Tensile Strength)	-	-	-
Cl.8 & 17(Armouring : Elongation)	-	-	-
Cl.8 & 17(Armouring : Torsion Test (For Round Steel Wire Only))	-	-	-
Cl.8 & 17(Armouring: Winding Test ( For formed steel wire only))	-	-	-
Cl.8 & 17(Armouring : Application)	-	-	-
Cl.8 & 17(Armouring : Uniformity of Zinc Coating)	-	-	-
Cl.8 & 17(Armouring: Mass of Zinc Coating)	-	-	-
Cl.8 & 17(Armouring : Resistivity Test)	-	-	-
Cl.8 & 17(Armouring: Cold Impact Test (For outer Sheath))	-	-	-
Cl. 13.5.1 and Table 7(Armouring: Resistance Test for Armouring (Other than Mining Cables))	-	-	-
19.1 vi) a)(Physical tests for outer sheath : Elongation )	-	-	-
19.1 vi) b)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	-	-
17.2(ARMOURING : Type of armour )	-	-	-

16 Apr, 2026

-
Included w.e.f.05.03.2025

4846

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 18340 (2023)

Vinyl Sulphone - Specification

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3.1(Description)	-	500	-
Cl-3.2, Table-1 (i)(Assay (by nitrite value), percent by mass (on dry basis), Min)	-	5000	-
Cl-3.2, Table-1 (i)(Assay (by HPLC1)), percent area (on dry basis),Min)	-	0	Testing charges already mentioned above at Cl-3.2, Table-1 (i) Assay (by nitrite value) i.e. Rs. 5000/-
Cl-3.2, Table-1 (ii)(Hydrolysis value, percent by mass (on 100 percent basis), Min)	-	2500	-
Cl-3.2, Table-1 (iii)(Matter insoluble in sodium carbonate solution percent by mass, Max)	-	2000	-
Cl-3.2, Table-1 (iv)(4-Chloroaniline content, percent by mass (on 100 percent basis), Max)	-	5000	-
Cl-4.2(Marking)	-	0	NA

31 Dec, 2026

-
Included w.e.f 20.03.2025

4847

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 11557 (1986)

Specification for 2 - Naphthylamine - 3 : 6 : 8 - Trisulphonic acid, technical

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(Description)	-	1000	-
2.2-Table 1-(i)(Matter insoluble in dilute sodium carbonate)	-	2000	-
2.2-Table 1-(ii)(Assay ( on dry basis ), percent by mass)	-	5000	-
2.2-Table 1-(iii)(Amide G. acid, percent by masss)	-	5000	-
3.1(Packing)	-	0	NA
3.2(Marking)	-	0	NA

31 Dec, 2026

-
Included w.e.f 20.03.2025

4848

QA TESTING LABORATORIES PRIVATE LIMITED, NOIDA

8169906

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

PE 63,PE 80,PE 100

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.9 table-6(Elongation at Break)	-	600	Facility Available
8.4( Melt Flow Rate)	-	500	Facility Available
Cl 8.3(Carbon Black Content)	-	500	Facility Available
Cl 8.3(Carbon Black Dispersion)	-	600	Facility Available
8.2(Longitudinal Reversion Test)	-	600	Facility Available
7.1(Visual Appearance)	-	500	Facility Available
Clause 8.6(Overall migration (surface of material))	-	500	Facility Available
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	600	Facility Available
8.5 (Oxidation Induction Time)	-	600	Facility Available
6.2.1(6.1.1 Identification Stripes)	-	500	Facility Available
Clause 7.1(Visual Apperance)	-	400	Facility Available
Cl. 8.3(Carbon Black Content)	-	300	Facility Available
Cl. 8.3(Carbon Black Dispersion)	-	300	Facility Available
Clause 8.6(Overall migration (stimulate))	-	500	Facility Available
8.6(Overall migration)	-	500	Facility Available
Clause 8.3(Carbon Black Dispersion)	-	500	Facility Available
Clause 8.3(Carbon Black content)	-	500	Facility Available
Cl 8.3(Carbon Black Content)	-	500	-
Cl 8.3(Carbon Black Dispersion)	-	500	-
7.1(Visual Appearance)	-	500	-
Clause 8.6(Overall migration (surface of material))	-	400	-
Clause 7.1(Visual Apperance)	-	400	-
Cl. 8.3(Carbon Black Content)	-	400	-
Cl. 8.3(Carbon Black Dispersion)	-	400	-
Clause 8.6(Overall migration (stimulate))	-	400	-
Clause 8.3(Carbon Black Dispersion)	-	400	-
Clause 8.3(Carbon Black content)	-	400	-
Cl 8.3(Carbon Black Content)	-	500	-
Cl 8.3(Carbon Black Dispersion)	-	500	-
7.1(Visual Appearance)	-	500	-
Clause 8.6(Overall migration (surface of material))	-	500	-
Clause 7.1(Visual Apperance)	-	500	-
Cl. 8.3(Carbon Black Content)	-	500	-
Cl. 8.3(Carbon Black Dispersion)	-	500	-
Clause 8.6(Overall migration (stimulate))	-	500	-
Clause 8.3(Carbon Black Dispersion)	-	500	-
Clause 8.3(Carbon Black content)	-	500	-

05 Apr, 2028

-
Included w.e.f.05.05.2025 8.8 (Tensile Strength for Butt-fusion) 7.3 (Coiling)

4849

UL INDIA PRIVATE LIMITED, BENGALURU

6120526

IS 12640 : Part 1 (2016)

Residual current operated circuitBreakers without integral overcurrent protection for household and similar uses (Rccbs): Part 1 general rules (Second Revision)

RCCB

1545000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Marking)	-	500	For DP = 500, FP = 500, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
8.1.1(General)	-	500	For DP = 500, FP = 500, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
8.1.2(Mechanism)	-	1500	For DP = 1000, FP = 1500, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.3(Indelibility of marking)	-	1000	For DP = 1000, FP = 1000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
8.1.3 (Creepage distances)	-	1500	For DP = 1000, FP = 1500, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
8.1.3 i)(Clearance )	-	1500	For DP = 1000, FP = 1500, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.15(Trip-free mechanism)	-	3500	For DP = 2500, FP = 3500, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.4(Test of reliability of screws, current carrying parts and connections )	-	5000	For DP = 3000, FP = 5000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.5(Test of reliability of terminals for external conductors)	-	5500	For DP = 3500, FP = 5500, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.6(Protection against electric shock)	-	4000	For DP = 2000, FP = 4000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.13(Test of resistance to heat)	-	2500	For DP = 2000, FP = 2500, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
8.1.3(Clearances and creepage distances (internal parts) Clearances distances)	-	1500	For DP = 1000, FP = 1500, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.7.1(Dielectric Properties : Resistance to humidity)	-	15000	For DP = 15000, FP = 15000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.7.2 (Insulation resistance of main circuit)	-	7500	For DP = 5000, FP = 7500, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.7.7.1(Rated impulse withstand voltage)	-	13500	For DP = 11000, FP = 13500, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.8(Test of Temperature rise)	-	18000	For DP = 15000, FP = 18000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.22.2(Testing with temperature of 40)	-	38000	For DP = 30000, FP = 38000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.23(Verification of ageing of electronic components )	-	25500	For DP = 23000, FP = 25500, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.11.2.3(VERIFICATION OF PERFORMANCE AT Im)	-	60000	For DP = 49000, FP = 60000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.16 a)(Verification of the operation of the test device at the limits of rated voltage )	-	3000	For DP = 2000, FP = 3000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.16 b)(Verification of the operation of the test device at the limits of rated voltage )	-	3000	For DP = 2000, FP = 3000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.16 c)(Verification of the operation of the test device at the limits of rated voltage )	-	3000	For DP = 2000, FP = 3000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.12.1(Verification of resistance to mechanical shock)	-	11000	For DP = 9000, FP = 11000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.18.1(Verification of the limiting value of overcurrent in case of a load through an RCCB with two current paths)	-	11000	For DP = 9000, FP = 11000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.11.2.4 (Verification of the coordination between the RCCB and the SCPD)	-	75000	For DP = 60000, FP = 75000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.22.1(Climatic test)	-	90000	For DP = 90000, FP = 90000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.19.1( Verification of behaviour of RCCBs in case of current surges caused by impulse voltages (Current surge test for all RCCBs (0,5 µs/100 kHz ring wave test)))	-	16000	For DP = 12000, FP = 16000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.19.2(Verification of behaviour at surge currents up to 3000A (8/20 s surge current test))	-	16000	For DP = 12000, FP = 16000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.25(Resistance to rusting)	-	3000	For DP = 2000, FP = 3000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.14(Resistance to abnormal heat and to fire)	-	20000	For DP = 15000, FP = 20000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.7.7.4(Resistance of the insulation of open contacts and basic insulation against an impulse voltage in normal conditions)	-	13500	For DP = 11000, FP = 13500, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.7.7.5(Verification of the behaviour of components bridging the basic insulation)	-	12000	For DP = 10000, FP = 12000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.7.3(Dielectric strength of the main circuit)	-	7500	For DP = 5000, FP = 7500, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.7.4(Insulation resistance and dielectric strength of auxiliary circuits)	-	7500	For DP = 5000, FP = 7500, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.7.7.2(Verification of clearances with the impulse withstand voltage)	-	13500	For DP = 11000, FP = 13500, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.7.5(Secondary circuit of detection transformers)	-	11000	For DP = 10000, FP = 11000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.7.6(Capability of control circuits connected to the main circuits etc.)	-	11000	For DP = 10000, FP = 11000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.10(Mechanical and electrical endurance)	-	120000	For DP = 80000, FP = 120000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.9(Residual operating characteristics)	-	90000	For DP = 60000, FP = 90000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.17(Behaviour in the case of failure of the line voltage)	-	8000	For DP = 6000, FP = 8000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.21(DC components)	-	11000	For DP = 8000, FP = 11000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
(9.11.2.3c)(Verification of the suitability of RCCBs for use in IT-systems)	-	80000	For DP = 60000, FP = 80000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
(9.11.2.4 c)(Coordination at IΔc)	-	75000	For DP = 60000, FP = 75000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.11.2.2(Performance at Im)	-	75000	For DP = 60000, FP = 75000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.24 Annex-A, Test Sequence-H(Surges)	-	90000	For DP = 60000, FP = 90000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.24 Annex-A, Test Sequence-I(Conducted sine-wave form voltages or currents)	-	60000	For DP = 60000, FP = 60000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.24 Annex-A, Test Sequence-I(Radiated electromagnetic field)	-	120000	For DP = 120000, FP = 120000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.24 Annex-A, Test Sequence-I(Fast transients (bursts))	-	90000	For DP = 60000, FP = 90000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.24 Annex-A, Test Sequence-J(Conducted common mode disturbances)	-	135000	For DP = 90000, FP = 135000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.24 Annex-A, Test Sequence-J(Electrostatic discharges)	-	20000	For DP = 20000, FP = 20000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
6(Marking)	-	500	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
8.1.1(General)	-	500	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
8.1.2(Mechanism)	-	1500	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-1000 FP-1500
9.3(Indelibility of marking)	-	1000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
8.1.3 (Creepage distances)	-	1500	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-1000 FP-1500
8.1.3 i)(Clearance )	-	1500	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-1000 FP-1500
9.15(Trip-free mechanism)	-	3500	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-2500 FP-3500
9.4(Test of reliability of screws, current carrying parts and connections )	-	5000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-3000 FP-5000
9.5(Test of reliability of terminals for external conductors)	-	5500	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-3500 FP-5500
9.6(Protection against electric shock)	-	4000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-2000 FP-4000
9.13(Test of resistance to heat)	-	2500	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-2000 FP-2500
8.1.3(Clearances and creepage distances (internal parts) Clearances distances)	-	1500	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-1000 FP-1500
9.7.1(Dielectric Properties : Resistance to humidity)	-	15000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.7.2 (Insulation resistance of main circuit)	-	7500	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-5000 FP-7500
9.7.7.1(Rated impulse withstand voltage)	-	13500	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-11000 FP-13500
9.8(Test of Temperature rise)	-	18000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-15000 FP-18000
9.22.2(Testing with temperature of 40)	-	38000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-30000 FP-38000
9.23(Verification of ageing of electronic components )	-	25500	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-23000 FP-25500
9.11.2.3(VERIFICATION OF PERFORMANCE AT Im)	-	60000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-49000 FP-60000
9.16 a)(Verification of the operation of the test device at the limits of rated voltage )	-	3000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-2000 FP-3000
9.16 b)(Verification of the operation of the test device at the limits of rated voltage )	-	3000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-2000 FP-3000
9.16 c)(Verification of the operation of the test device at the limits of rated voltage )	-	3000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-2000 FP-3000
9.12.1(Verification of resistance to mechanical shock)	-	11000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-9000 FP-11000
9.18.1(Verification of the limiting value of overcurrent in case of a load through an RCCB with two current paths)	-	11000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-9000 FP-11000
9.11.2.4 (Verification of the coordination between the RCCB and the SCPD)	-	75000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-60000 FP-75000
9.22.1(Climatic test)	-	90000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.19.1( Verification of behaviour of RCCBs in case of current surges caused by impulse voltages (Current surge test for all RCCBs (0,5 µs/100 kHz ring wave test)))	-	16000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-12000 FP-16000
9.19.2(Verification of behaviour at surge currents up to 3000A (8/20 s surge current test))	-	16000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-12000 FP-16000
9.25(Resistance to rusting)	-	3000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.14(Resistance to abnormal heat and to fire)	-	20000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.7.7.4(Resistance of the insulation of open contacts and basic insulation against an impulse voltage in normal conditions)	-	13500	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.7.7.5(Verification of the behaviour of components bridging the basic insulation)	-	12000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.7.3(Dielectric strength of the main circuit)	-	7500	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.7.4(Insulation resistance and dielectric strength of auxiliary circuits)	-	7500	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.7.7.2(Verification of clearances with the impulse withstand voltage)	-	13500	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.7.5(Secondary circuit of detection transformers)	-	11000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.7.6(Capability of control circuits connected to the main circuits etc.)	-	11000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.10(Mechanical and electrical endurance)	-	120000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.9(Residual operating characteristics)	-	90000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.17(Behaviour in the case of failure of the line voltage)	-	8000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.21(DC components)	-	11000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
(9.11.2.3c)(Verification of the suitability of RCCBs for use in IT-systems)	-	80000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
(9.11.2.4 c)(Coordination at IΔc)	-	75000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.11.2.2(Performance at Im)	-	75000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.24 Annex-A, Test Sequence-H(Surges)	-	90000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.24 Annex-A, Test Sequence-I(Conducted sine-wave form voltages or currents)	-	60000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.24 Annex-A, Test Sequence-I(Radiated electromagnetic field)	-	120000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.24 Annex-A, Test Sequence-I(Fast transients (bursts))	-	90000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.24 Annex-A, Test Sequence-J(Conducted common mode disturbances)	-	135000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.24 Annex-A, Test Sequence-J(Electrostatic discharges)	-	20000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)

12 May, 2027

-
Included w.e.f, 10/04/2020 Exclusion : Cl.9.24 Annex-A, Test Sequence-H (Harmonics, inter harmonics), Cl.9.24 Annex-A, Test Sequence-H (Signalling voltages).

4850

UL INDIA PRIVATE LIMITED, BENGALURU

6120526

IS 12640 : Part 2 (2016)

Residual current operated circuit - Breakers with integral overcurrent protection for household and similar uses (Rcbos): Part 2 general rules

RCBO

1775000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.3(Clearances and creepage distances (internal parts))	-	1500	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-1000 FP-1500
9.7.1(Resistance to humidity)	-	15000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-15000 FP-15000
9.7.2(Insulation resistance of main circuit)	-	7500	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-5000 FP-7500
9.7.3 a)(Dielectric strength of the main circuit)	-	7500	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-5000 FP-7500
9.7.6(Capability of control circuits connected to the main circuit in respect of withstanding high d.c. voltages due to insulation measurements )	-	11000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-10000 FP-11000
9.8(Test of temperature-rise )	-	18000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-15000 FP-18000
9.22.2(Test with temperature of 40 ºC)	-	38000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-30000 FP-38000
9.12.11.2(PERFORMANCE AT REDUCED SHORT-CIRCUIT CURRENTS)	-	90000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-70000 FP-90000
9.12.12.1(VERIFICATION OF THE RCBO AFTER SHORT-CIRCUIT TEST : DIELECTRIC STRENGTH TEST)	-	110000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-80000 FP-110000
9.9.1.2(Verification of the operating characteristic under residual current conditions)	-	90000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-60000 FP-90000
9.16(Verification of the operation of the test device at the limits of rated voltage )	-	4000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-3000 FP-4000
9.13.1(Verification of resistance to mechanical shock )	-	11000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-9000 FP-11000
9.12.11.3(SHORT-CIRCUIT PERFORMANCE AT 1500 A)	-	139000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-101000 FP-139000
9.12.11.4(TEST AT SERVICE SHORT-CIRCUIT CAPACITY (Ics)	-	120000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-90000 FP-120000
9.22.1(Reliability (Climatic test))	-	90000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-90000 FP-90000
9.19.1(Current surge test for all RCBOs (0,5 µs/100 kHz ring wave test))	-	16000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-12000 FP-16000
6, 9.3(Indelibility of marking)	-	1500	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) Cl.#6 - DP=500, FP=500 Cl.#9.3, DP=1000, FP=1000
8.1.2 , 9.11(Trip-free mechanism)	-	5000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) Cl.#8.1.2 - DP=800, FP=1500 Cl.#9.3, DP=2100, FP=3500
9.4(Reliability of screws, current-carrying parts and connections)	-	5000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-3000 FP-5000
9.5(Test of reliability of screw-type terminals for external)	-	5500	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-3500 FP-5500
9.6(Protection against electric shock)	-	3200	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-2000 FP-3200
9.14(Resistance to heat)	-	2500	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-1800 FP-2500
9.25(Resistance to rusting)	-	3000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-2000 FP-3000
9.15(Resistance to abnormal heat and to fire)	-	20000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-15000 FP-20000
9.7.7.4(Resistance of the insulation of open contacts and basic insulation against an impulse voltage in normal conditions)	-	13500	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-11000 FP-13500
9.7.7.5(Verification of the behavior of components bridging the basic insulation)	-	12000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-10000 FP-12000
9.7.4(Insulation resistance and dielectric strength of auxiliary circuits)	-	7500	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-5000 FP-7500
9.7.7.1(testing procedure for the impulse withstand voltage tests)	-	13500	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-11000 FP-13500
9.7.7.2(Verification of clearances with the impulse withstand voltage)	-	13500	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-11000 FP-13500
9.7.5(Secondary circuit of detection transformers)	-	11000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-10000 FP-11000
9.7.7.3(Verification of leakage currents across open contacts)	-	2000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-1000 FP-2000
9.23(Ageing of electronic components)	-	25500	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-23000 FP-25500
9.10(Mechanical and electrical endurance)	-	70000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-50000 FP- 70000
9.17(Behaviour in case of failure of the line voltage)	-	8000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-6000 FP-8000
9.19(Behaviour in case of surge currents)	-	16000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-12000 FP-16000
9.21(DC components)	-	11000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-8000 FP-11000
9.12.13(Performance at IΔm)	-	70000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-57000 FP-70000
9.9.2(Overcurrent operating characteristics)	-	70000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-40000 FP-70000
9.12.11.4 b) (and 9.12.12)(Performance at service short-circuit capacity)	-	120000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-90000 FP-120000
9.12.11.4 c) (and 9.12.12.2)(Performance at rated short-circuit capacity)	-	120000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-90000 FP-120000
9.24 Annex-A, Test Sequence-H(Surges)	-	90000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-60000 FP-90000
9.24 Annex-A, Test Sequence-I(Conducted sine-wave form voltages or currents)	-	60000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-60000 FP- 60000
9.24 Annex-A, Test Sequence-I(Radiated electromagnetic field)	-	120000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-120000 FP-120000
9.24 Annex-A, Test Sequence-I(Fast transients (bursts))	-	90000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-60000 FP-90000
9.24 Annex-A, Test Sequence-J(Conducted common mode disturbances)	-	135000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-90000 FP-135000
9.24 Annex-A, Test Sequence-J(Electrostatic discharges)	-	20000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-20000 FP- 20000
8.1.1(General)	-	500	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-500 FP- 500
8.1.6(Noninterchangeability)	-	800	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-800 FP- 800
9.12.11.2.2(Short circuit test for verifying suitability of RCBOs for use in IT-systems)	-	110000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-80000 FP-110000
9.7.1(Resistance to humidity)	-	15000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP)
6, 9.3(Indelibility of marking)	-	0	-
8.1.2 , 9.11(Trip-free mechanism)	-	0	-
9.4(Reliability of screws, current-carrying parts and connections)	-	0	-
9.5(Test of reliability of screw-type terminals for external)	-	0	-
9.6(Protection against electric shock)	-	0	-
9.14(Resistance to heat)	-	0	-
9.25(Resistance to rusting)	-	0	-
9.15(Resistance to abnormal heat and to fire)	-	0	-
9.7.7.4(Resistance of the insulation of open contacts and basic insulation against an impulse voltage in normal conditions)	-	0	-
9.7.7.5(Verification of the behavior of components bridging the basic insulation)	-	0	-
9.7.4(Insulation resistance and dielectric strength of auxiliary circuits)	-	0	-
9.7.7.1(testing procedure for the impulse withstand voltage tests)	-	0	-
9.7.7.2(Verification of clearances with the impulse withstand voltage)	-	0	-
9.7.5(Secondary circuit of detection transformers)	-	0	-
9.7.7.3(Verification of leakage currents across open contacts)	-	0	-
9.23(Ageing of electronic components)	-	0	-
9.10(Mechanical and electrical endurance)	-	0	-
9.17(Behaviour in case of failure of the line voltage)	-	0	-
9.19(Behaviour in case of surge currents)	-	0	-
9.21(DC components)	-	0	-
9.12.13(Performance at IΔm)	-	0	-
9.9.2(Overcurrent operating characteristics)	-	0	-
9.12.11.4 b) (and 9.12.12)(Performance at service short-circuit capacity)	-	0	-
9.12.11.4 c) (and 9.12.12.2)(Performance at rated short-circuit capacity)	-	0	-
9.24 Annex-A, Test Sequence-H(Surges)	-	0	-
9.24 Annex-A, Test Sequence-I(Conducted sine-wave form voltages or currents)	-	0	-
9.24 Annex-A, Test Sequence-I(Radiated electromagnetic field)	-	0	-
9.24 Annex-A, Test Sequence-I(Fast transients (bursts))	-	0	-
9.24 Annex-A, Test Sequence-J(Conducted common mode disturbances)	-	0	-
9.24 Annex-A, Test Sequence-J(Electrostatic discharges)	-	0	-
8.1.1(General)	-	500	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-500 FP-500
8.1.6(Noninterchangeability)	-	800	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-800 FP-800

12 May, 2027

-
Included w.e.f, 10/04/2020 Exclusion : Cl.9.24 Annex-A, Test Sequence-H (Harmonics, inter harmonics), Cl.9.24 Annex-A, Test Sequence-H (Signalling voltages).

4851

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 8637 (2020)

H Acid ? Specification ( Second Revision )

17000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Description)	-	500	-
3.2-Table 1-(i)(Purity (by nitrite value))	-	2500	-
3.2-Table 1-(ii)(Difference between nitrite value and coupling value)	-	2500	-
3.2-Table 1-(iii)(Matter insoluble in sodium carbonate solution)	-	1500	-
3.2-Table 1-(iv)(Purity (by HPCL))	-	4000	-
3.2-Table 1-(v)(Chromotropic acid content,)	-	3000	-
3.2-Table 1-(vi)(Koch’s acid content)	-	3000	-
4.1(Packing )	-	0	NA
4.2(Marking)	-	0	NA

31 Dec, 2026

-
Included w.e.f 20.03.2025

4852

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET), RANCHI

5173614

IS 13487 (1992)

Irrigation equipment - Emitters - Specification

Category - A & B

3825.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Construction and workmanship)	-	500	+ GST as applicable Total Test Charges = Rs. 5100/- (25 % Discount on Test Charges for BIS)
7.2(Flow path in emitters)	-	500	+ GST as applicable
7.3.1(Resistance to Hydrostatic pressure)	-	1000	+ GST as applicable
7.3.2(Resistance to Hydrostatic pressure)	-	0	-
7.3.3(Resistance to Hydrostatic pressure)	-	0	-
7.4.1(Emitter Pull Out In-line emitters)	-	500	+ GST as applicable
7.4.2(Emitter Pull Out On-line emitters)	-	0	-
8.1.2(Uniformity of Emission Rate Unregulated emitters)	-	1000	+ GST as applicable
8.1.2(Uniformity of Emission Rate Unregulated emitters)	-	0	-
8.1.3(Uniformity of Emission Rate Regulated emitters)	-	0	-
8.1.3(Uniformity of Emission Rate Regulated emitters)	-	0	-
8.2.2(Emission rate as a function of inlet pressure Unregulated emitters)	-	1000	+ GST as applicable
8.2.3(Emission rate as a function of inlet pressure Regulated emitters)	-	0	-
8.3(Determination of Emitter Exponent)	-	600	+ GST as applicable
4(Classification)	-	0	-
5.1(Connections)	-	0	-
5.2(Emitter Ends)	-	0	-
5.3(Materials)	-	0	-
6.1(Test Specimens)	-	0	-
6.2(Test Conditions)	-	0	-
6.3(Accuracy or Measuring Devices)	-	0	-
7.1(Construction and Workmanship)	-	0	-
7.2(Flow Paths In Emitter)	-	0	-
7.3(Resistance to Hydrostatic Pressure)	-	0	-
7.4(Emitter Pull-out)	-	0	-
7.4.1(In-Line Emitters)	-	0	-
7.4.2(On-Line Emitters)	-	0	-
8.1(Uniformity of Emission Rate)	-	0	-
8.1.1(Number of Test Samples)	-	0	-
8.1.2(Unregulated Emitters)	-	0	-
8.1.3(Regulated Emitters)	-	0	-
8.2(Emission Rate as a Function of Inlet Pressure)	-	0	-
8.2.1(Selection of Telt Sample)	-	0	-
8.2.2(Unregulated Emttters)	-	0	-
8.2.3(Regulated Emitters)	-	0	-
8.3(Determiaatlon of Emitter Exponent)	-	0	-
9(Marking)	-	0	-
7.1(Construction and workmanship)	-	0	-
7.2(Flow path in emitters)	-	0	-
7.3.1(Resistance to Hydrostatic pressure)	-	0	-
7.3.2(Resistance to Hydrostatic pressure)	-	0	-
7.3.3(Resistance to Hydrostatic pressure)	-	0	-
7.4.1(Emitter Pull Out In-line emitters)	-	0	-
7.4.2(Emitter Pull Out On-line emitters)	-	0	-
8.1.2(Uniformity of Emission Rate Unregulated emitters)	-	0	-
8.1.2(Uniformity of Emission Rate Unregulated emitters)	-	0	-
8.1.3(Uniformity of Emission Rate Regulated emitters)	-	0	-
8.1.3(Uniformity of Emission Rate Regulated emitters)	-	0	-
8.2.2(Emission rate as a function of inlet pressure Unregulated emitters)	-	0	-
8.2.3(Emission rate as a function of inlet pressure Regulated emitters)	-	0	-
8.3(Determination of Emitter Exponent)	-	0	-
4(Classification)	-	0	-
5.1(Connections)	-	0	-
5.2(Emitter Ends)	-	0	-
5.3(Materials)	-	0	-
6.1(Test Specimens)	-	0	-
6.2(Test Conditions)	-	0	-
6.3(Accuracy or Measuring Devices)	-	0	-
7.1(Construction and Workmanship)	-	0	-
7.2(Flow Paths In Emitter)	-	0	-
7.3(Resistance to Hydrostatic Pressure)	-	0	-
7.4(Emitter Pull-out)	-	0	-
7.4.1(In-Line Emitters)	-	0	-
7.4.2(On-Line Emitters)	-	0	-
8.1(Uniformity of Emission Rate)	-	0	-
8.1.1(Number of Test Samples)	-	0	-
8.1.2(Unregulated Emitters)	-	0	-
8.1.3(Regulated Emitters)	-	0	-
8.2(Emission Rate as a Function of Inlet Pressure)	-	0	-
8.2.1(Selection of Telt Sample)	-	0	-
8.2.2(Unregulated Emttters)	-	0	-
8.2.3(Regulated Emitters)	-	0	-
8.3(Determiaatlon of Emitter Exponent)	-	0	-
9(Marking)	-	0	-

09 Aug, 2026

-
Included.w.e.f.30.01.2025

4853

Rajkot Metlab Services LLP, Rajkot

7183706

IS 1030 (1998)

Carbon steel castings for general engineering purposes - Specification (Fifth Revision)

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CI.8.1, 8.3 and 8.4.1, Table-1(Carbon)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Sulpur)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Phosphorus)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1()	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Silicon)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Chromium)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Nickel)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Molybdenum)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Copper)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Vanadium)	-	1500	-
CI.13.2, Table-2(Tensile Test)	-	1500	-
CI.13.2, Table-2(Yield Stress)	-	1500	-
CI.13.2, Table-2(Elongation)	-	1500	-
CI.13.4, Table-2(Bend Test)	-	1000	-
CI.13.3(Impact Test)	-	2500	-
CI.13.3(Hydraulic Test)	-	1500	-
9(Workmanship & Finish)	-	100	-
10(Freedom from defects)	-	100	-
11(Fetting and dressing)	-	100	-
14(Non-destructive tests)	-	1500	-
16(Hydraulic test)	-	1500	-
18(Marking)	-	100	-
1()	-	1000	-
CI.8.1, 8.3 and 8.4.1, Table-1(Carbon)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Sulpur)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Phosphorus)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1()	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Silicon)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Chromium)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Nickel)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Molybdenum)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Copper)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Vanadium)	-	1500	-
CI.13.2, Table-2(Tensile Test)	-	1500	-
CI.13.2, Table-2(Yield Stress)	-	1500	-
CI.13.2, Table-2(Elongation)	-	1500	-
CI.13.4, Table-2(Bend Test)	-	1000	-
CI.13.3(Impact Test)	-	2500	-
CI.13.3(Hydraulic Test)	-	1500	-
9(Workmanship & Finish)	-	100	-
10(Freedom from defects)	-	100	-
11(Fetting and dressing)	-	100	-
14(Non-destructive tests)	-	1500	-
16(Hydraulic test)	-	1500	-
18(Marking)	-	100	-
1()	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Carbon)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Sulpur)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Phosphorus)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1()	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Silicon)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Chromium)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Nickel)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Molybdenum)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Copper)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Vanadium)	-	1500	-
CI.13.2, Table-2(Tensile Test)	-	1500	-
CI.13.2, Table-2(Yield Stress)	-	1500	-
CI.13.2, Table-2(Elongation)	-	1500	-
CI.13.4, Table-2(Bend Test)	-	1000	-
CI.13.3(Impact Test)	-	2500	-
CI.13.3(Hydraulic Test)	-	1500	-
9(Workmanship & Finish)	-	100	-
10(Freedom from defects)	-	100	-
11(Fetting and dressing)	-	100	-
14(Non-destructive tests)	-	1500	-
16(Hydraulic test)	-	1500	-
18(Marking)	-	1000	-
1()	-	1000	-
CI.8.1, 8.3 and 8.4.1, Table-1(Carbon)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Sulpur)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Phosphorus)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1()	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Silicon)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Chromium)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Nickel)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Molybdenum)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Copper)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Vanadium)	-	1500	-
CI.13.2, Table-2(Tensile Test)	-	1500	-
CI.13.2, Table-2(Yield Stress)	-	1500	-
CI.13.2, Table-2(Elongation)	-	1500	-
CI.13.4, Table-2(Bend Test)	-	1000	-
CI.13.3(Impact Test)	-	2500	-
CI.13.3(Hydraulic Test)	-	1500	-
9(Workmanship & Finish)	-	100	-
10(Freedom from defects)	-	100	-
11(Fetting and dressing)	-	100	-
14(Non-destructive tests)	-	1500	-
16(Hydraulic test)	-	1500	-
18(Marking)	-	100	-
1()	-	1000	-
CI.8.1, 8.3 and 8.4.1, Table-1(Carbon)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Sulpur)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Phosphorus)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1()	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Silicon)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Chromium)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Nickel)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Molybdenum)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Copper)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Vanadium)	-	1500	-
CI.13.2, Table-2(Tensile Test)	-	1500	-
CI.13.2, Table-2(Yield Stress)	-	1500	-
CI.13.2, Table-2(Elongation)	-	1500	-
CI.13.4, Table-2(Bend Test)	-	1000	-
CI.13.3(Impact Test)	-	2500	-
CI.13.3(Hydraulic Test)	-	1500	-
9(Workmanship & Finish)	-	100	-
10(Freedom from defects)	-	100	-
11(Fetting and dressing)	-	100	-
14(Non-destructive tests)	-	1500	-
16(Hydraulic test)	-	1500	-
18(Marking)	-	100	-
1()	-	1000	-

12 Jan, 2028

-
Included w.e.f.18.06.2025

4854

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 1239 : Part 1 (2004)

Steel Tubes, Tubulars and Other Wrought Steel Fittings : Part 1 Steel Tubes (BI-LINGUAL)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12 AND AS PER IS 4736(UNIFORMITY OF ZINC COATING)	-	15000	-
12 AND AS PER IS 4736(MASS OF ZINC COATING)	-	15000	-
6.2 AND AS PER IS 513(NITROGEN)	-	15000	-
6.2 AND AS PER IS 513(MICRO ALLOY)	-	15000	-
6.2 AND AS PER IS 513(ALUMINIUM)	-	15000	-
6.2 AND AS PER IS 513(SILICON)	-	15000	-
6.2 AND AS PER IS 513(MANGANESE)	-	15000	-
6.2 AND AS PER IS 513(PHOSPHORUS)	-	15000	-
6.2 AND AS PER IS 513(SULPHUR)	-	15000	-
6.2 AND AS PER IS 513(CARBON)	-	15000	-
6.2 AND AS PER IS 10748(COPPER)	-	15000	-
6.2 AND AS PER IS 10748(NITROGEN)	-	15000	-
6.2 AND AS PER IS 10748(MICRO ALLOY)	-	15000	-
6.2 AND AS PER IS 10748(ALUMINIUM)	-	15000	-
6.2 AND AS PER IS 10748(SILICON)	-	15000	-
6.2 AND AS PER IS 10748(CARBON EQUIVALENT)	-	15000	-
6.2 AND AS PER IS 10748(MANGANESE)	-	15000	-
6.2 AND AS PER IS 10748(PHOSPHORUS)	-	15000	-
6.2 AND AS PER IS 10748(SULPHUR)	-	15000	-
6.2 AND AS PER IS 10748(CARBON)	-	15000	-
Clause - 6.1.1, Table-1( ALUMINIUM)	-	15000	-
Clause - 6.1.1, Table-1(SILICON)	-	15000	-
Clause - 6.1.1, Table-1(NITROGEN)	-	15000	-
Clause - 6.1.1, Table-1(MANGANESE)	-	15000	-
Clause - 6.1.1, Table-1(PHOSPHURS)	-	15000	-
Clause - 6.1.1, Table-1(SULPHUR)	-	15000	-
Clause - 6.1.1, Table-1( CARBON)	-	15000	-
12 AND AS PER IS 4736(UNIFORMITY OF ZINC COATING)	-	15000	-
12 AND AS PER IS 4736(MASS OF ZINC COATING)	-	15000	-
6.2 AND AS PER IS 513(NITROGEN)	-	15000	-
6.2 AND AS PER IS 513(MICRO ALLOY)	-	15000	-
6.2 AND AS PER IS 513(ALUMINIUM)	-	15000	-
6.2 AND AS PER IS 513(SILICON)	-	15000	-
6.2 AND AS PER IS 513(MANGANESE)	-	15000	-
6.2 AND AS PER IS 513(PHOSPHORUS)	-	15000	-
6.2 AND AS PER IS 513(SULPHUR)	-	15000	-
6.2 AND AS PER IS 513(CARBON)	-	15000	-
6.2 AND AS PER IS 10748(COPPER)	-	15000	-
6.2 AND AS PER IS 10748(NITROGEN)	-	15000	-
6.2 AND AS PER IS 10748(MICRO ALLOY)	-	15000	-
6.2 AND AS PER IS 10748(ALUMINIUM)	-	15000	-
6.2 AND AS PER IS 10748(SILICON)	-	15000	-
6.2 AND AS PER IS 10748(CARBON EQUIVALENT)	-	15000	-
6.2 AND AS PER IS 10748(MANGANESE)	-	15000	-
6.2 AND AS PER IS 10748(PHOSPHORUS)	-	15000	-
6.2 AND AS PER IS 10748(SULPHUR)	-	15000	-
6.2 AND AS PER IS 10748(CARBON)	-	15000	-
6.1.1(MANGANESE)	-	15000	-
6.1.1(PHOSPHORUS)	-	15000	-
6.1.1(SULPHUR)	-	15000	-
6.1.1(CARBON)	-	15000	-
Cl. 6.1.1, table1 of IS 1239(Part1)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000	-
Cl. 6.1.1, table1 of IS 1239(Part1)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000	-
Cl. 6.1.1, table1 of IS 1239(Part1)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000	-
Cl. 6.1.1, table1 of IS 1239(Part1)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000	-
Cl. 15(Workmanship)	-	15000	-
Cl. 14.3(Flattening test (Over 50 mm NB))	-	15000	-
Cl. 14.2(Bend Test (uto and including 50 mm NB))	-	15000	-
Cl. 14.1.1(Elongation)	-	15000	-
Cl. 14.1(Tensile Strength)	-	15000	-
Cl. 3.3, 10.2(Plain End)	-	15000	-
Cl. 11(Length)	-	15000	-
Cl. 8, 9 Table 3,4 & 5(Mass of Tube)	-	15000	-
Cl. 6.5(Height of Internal Fin)	-	15000	-
Cl. 8, 9 Table 3,4 & 5(Thickness)	-	15000	-
Cl. 8 Table 3,4 & 5(Outside Diameter)	-	15000	-
Clause 14.1.1(Elongation Percent)	-	15000	-
Clause 11.3(Approximate Length)	-	15000	-
Clause 11.2(Exact Length)	-	15000	-
Clause 11.1(Random Length)	-	15000	-
Clause 8.1 (Table3,4,5)(Nominal Bore )	-	15000	-
Cl 15(Workmanship)	-	15000	-
Cl 14(Tensile Test, Flattening Test & Bend Test)	-	15000	-
Cl 12(Workmanship)	-	15000	-
Cl 10.1.1(Manufacturing )	-	15000	-
Cl 10.1(Manufacturing )	-	15000	-
Cl 8(Outer Diameter, Thickness & Mass)	-	15000	-
17(Marking)	-	15000	-
cl.17(MARKING)	-	15000	-
6.2(Carbon Equivalent as CE- IS:8811-98(RA12))	-	15000	-

31 Dec, 2026

-
-

4855

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 5145 (1969)

Specification for walking sticks

Walking Sticks

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-2.1(Wood)	-	1000	-
Cl.2.2(ALUMINIUM)	-	4000	-
Cl.4(MANUFACTURE)	-	200	-
Cl.5(WORKMANSHIP AND FINISH)	-	200	-
Cl.6.1(STRENGTH TEST)	-	700	-
Cl.7(MARKING)	-	200	-
Cl.8(PACKING)	-	200	-
Cl-2.1(Wood)	-	0	-
Cl.2.2(ALUMINIUM)	-	0	-
Cl.4(MANUFACTURE)	-	0	-
Cl.5(WORKMANSHIP AND FINISH)	-	0	-
Cl.6.1(STRENGTH TEST)	-	0	-
Cl.7(MARKING)	-	0	-
Cl.8(PACKING)	-	0	-
Cl-2.1(Wood)	-	0	-
Cl.2.2(ALUMINIUM)	-	0	-
Cl.4(MANUFACTURE)	-	0	-
Cl.5(WORKMANSHIP AND FINISH)	-	0	-
Cl.6.1(STRENGTH TEST)	-	0	-
Cl.7(MARKING)	-	0	-
Cl.8(PACKING)	-	0	-
Cl-2.1(Wood)	-	0	-
Cl.2.2(ALUMINIUM)	-	0	-
Cl.4(MANUFACTURE)	-	0	-
Cl.5(WORKMANSHIP AND FINISH)	-	0	-
Cl.6.1(STRENGTH TEST)	-	0	-
Cl.7(MARKING)	-	0	-
Cl.8(PACKING)	-	0	-
Cl-3(Shapes and Dimensions)	-	500	-
Cl-6.2.1(Strength of joint between handle and the stick)	-	1000	-

26 Jul, 2027

-
Included w.e.f 25.02.2025

4856

CENTRAL POWER RESEARCH INSTITUTE (CPRI), BHOPAL

8100924

IS 15884 (2024)

ALTERNATING CURRENT DIRECT CONNECTED STATIC PREPAYMENT METERS FOR ACTIVE ENERGY CLASS 1 AND 2 SPECIFICATION

1065000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(GENERAL REQUIREMENTS)	-	30000	-
5.2.1(Spring Hammer Test)	-	800	-
5.2.2(Shock Test)	-	2150	-
5.2.3(Vibration Test)	-	2500	-
5.2.4(Test of Resistance to Heat and Fire)	-	8575	-
5.2.5(Tests of Protection against Penetration of Dust and Water)	-	14590	-
5.3.1(Dry Heat Test)	-	9950	-
5.3.2(Cold Test)	-	9950	-
5.3.3(Damp Heat Cyclic Test)	-	24375	-
5.4.1(Test of Power Consumption)	-	6600	-
5.4.2(Test of influence of voltage dips and interruptions)	-	2500	-
5.4.3(Test of Influence of Short-Time Overcurrent)	-	37500	-
5.4.4(Test of Influence of Self-Heating)	-	3000	-
5.4.5(Test of Influence of Heating)	-	2650	-
5.4.6.2(Impulse voltage test)	-	6600	-
5.4.6.3(a.c. voltage test)	-	650	-
5.4.6.4(Insulation resistance test)	-	590	-
5.5.2(Test of Immunity to Electrostatic Discharges)	-	19530	-
5.5.3(Test of Immunity to Electromagnetic HF Fields)	-	34740	-
5.5.4(Fast Transient Burst Test)	-	11590	-
5.5.5(Radio Interference Measurement)	-	13900	-
5.5.6(Surge Immunity Test)	-	6960	-
5.6.2(Test of Influence Quantities)	-	18600	-
5.6.3(Test of No-Load Condition)	-	1350	-
5.6.4(Test of Starting Condition)	-	1350	-
5.6.5(Test of Meter Constant)	-	1350	-
5.6.6(Interpretation of Test Results)	-	700	-
5.7(Test of the Load Switch operation for payment function)	-	18000	-
5.8(Test of Charging Functions)	-	1750	-
5.9(Interruption and Restoration of the Load for Emergency Credit Facility (if applicable))	-	1750	-
5.10(Tests of the Load Switch operation at Different Voltages and Temperature)	-	10000	-
6(FUNCTIONAL REQUIREMENTS)	-	5500	-

30 Jun, 2027

-
Included w.e.f 03.03.2025 Exclusion 5.5.5 (Radio Interference Measurement)

4857

Rajkot Metlab Services LLP, Rajkot

7183706

IS 1875 (1992)

Carbon steel billets, blooms, slabs and bars for forgings - Specification (Fifth Revision)

8090 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7(Workmanship)	-	100	-
Cl 8(Diameter, Ovality & Weight)	-	100	-
Cl 9(UTM & HBW)	-	2500	-
Cl 12(Supplementary Requirements)	-	100	-
Cl 7(Workmanship)	-	100	-
Cl 8(Diameter, Ovality & Weight)	-	100	-
Cl 9(UTM & HBW)	-	2500	-
Cl 12(Supplementary Requirements)	-	100	-
Cl 7(Workmanship)	-	100	-
Cl 8(Diameter, Ovality & Weight)	-	100	-
Cl 9(UTM & HBW)	-	2500	-
Cl 12(Supplementary Requirements)	-	100	-
6.1, 6.2(cr + n + mo)	-	1500	-
6.1, 6.2(tin)	-	500	-
6.1, 6.2(boron)	-	500	-
6.1, 6.2(vanadium)	-	500	-
6.1, 6.2(molybdenum)	-	500	-
6.1, 6.2(copper)	-	500	-
6.1, 6.2(cromium)	-	500	-
6.1, 6.2(nickel)	-	500	-
6.1, 6.2(aluminium)	-	500	-
6.1, 6.2(phosphorus)	-	500	-
6.1, 6.2(sulphur)	-	500	-
6.1, 6.2(manganese)	-	500	-
6.1, 6.2(silicon )	-	500	-
6.1, 6.2(carbon)	-	500	-
6.1, 6.2(phosphorus)	-	500	-
6.1, 6.2(sulphur)	-	500	-
6.1, 6.2(manganese)	-	500	-
6.1, 6.2(silicon )	-	500	-
6.1, 6.2(carbon)	-	500	-
6.1, 6.2(phosphorus)	-	500	-
6.1, 6.2(sulphur)	-	500	-
6.1, 6.2(manganese)	-	500	-
6.1, 6.2(silicon )	-	500	-
6.1, 6.2(carbon)	-	500	-
6.1, 6.2(phosphorus)	-	500	-
6.1, 6.2(sulphur)	-	500	-
6.1, 6.2(manganese)	-	500	-
6.1, 6.2(silicon )	-	500	-
6.1, 6.2(carbon)	-	500	-
6.1, 6.2(phosphorus)	-	500	-
6.1, 6.2(sulphur)	-	500	-
6.1, 6.2(manganese)	-	500	-
6.1, 6.2(silicon )	-	500	-
6.1, 6.2(carbon)	-	500	-
6.1, 6.2(phosphorus)	-	500	-
6.1, 6.2(sulphur)	-	500	-
6.1, 6.2(manganese)	-	500	-
6.1, 6.2(silicon )	-	500	-
6.1, 6.2(carbon)	-	500	-
6.1, 6.2(phosphorus)	-	500	-
6.1, 6.2(sulphur)	-	500	-
6.1, 6.2(manganese)	-	500	-
6.1, 6.2(silicon )	-	500	-
6.1, 6.2(carbon)	-	500	-
6.1, 6.2(phosphorus)	-	500	-
6.1, 6.2(sulphur)	-	500	-
6.1, 6.2(manganese)	-	500	-
6.1, 6.2(silicon )	-	500	-
6.1, 6.2(carbon)	-	500	-
6.1, 6.2(phosphorus)	-	500	-
6.1, 6.2(sulphur)	-	500	-
6.1, 6.2(manganese)	-	500	-
6.1, 6.2(silicon )	-	500	-
6.1, 6.2(carbon)	-	500	-
6, table 1(Chemical Composition)	-	8000	-
7(Freedom from defects)	-	500	-
8(Dimensional Properties (Diameter))	-	500	-
8(Dimensional Properties (Ovality))	-	500	-
8(Dimensional Properties (Weight per Meter, kg))	-	500	-
9.1, table 2(Tensile Strength)	-	1500	-
9.1, table 2(Yield Strength)	-	1500	-
9.1, table 2(Elongation)	-	1500	-
9.2, table 2(hardness test)	-	1000	-
12.2(Bend Test)	-	1000	-
12.3(grain size)	-	1800	-
12.4(Macrostructure)	-	1800	-
12.5(Ultrasonic Test)	-	1800	-
12.6(Magnetic Particle Test)	-	1800	-
12.7(Blue Fracture Test)	-	1800	-
Cl 12(Supplementary Requirements)	-	100	-
Cl 9(UTM & HBW)	-	2500	-
Cl 8(Diameter, Ovality & Weight)	-	100	-
Cl 7(Workmanship)	-	100	-
Cl 7(Workmanship)	-	100	-
Cl 8(Diameter, Ovality & Weight)	-	100	-
Cl 9(UTM & HBW)	-	2500	-
Cl 12(Supplementary Requirements)	-	100	-
Clause 6, Table 1, Note 1(Cr+Ni+Mo)	-	1500	-
Clause 6, Table 1, Note 2(Cu +(10xTin))	-	1000	-
9.1(Tensile Strength - IS: 1608(P1))	-	1500	-
9.1(Yield Strength-IS:1608(P1))	-	1500	-
9.1(Elongation on SoA 5.65mm GL)	-	1500	-
9.2(Hardness-HB IS:1500 (P1))	-	1000	-
12.0 & 12.2(Bend Test - IS 1599)	-	1000	-
12.0 & 12.3(Grain Size - IS 4748)	-	1800	-
12.0 & 12.4(Macrostructure- IS 11371)	-	1800	-
12.0 & 12.5(Ultrasnoic Test)	-	1800	-
12.0 & 12.6(Magnetic Particle Test - IS 10138 (P3))	-	1800	-
5(Manufacture)	-	100	-
7(Freedom from defects)	-	100	-
13(Marking)	-	100	-
12.7(Blue fracture test (IS:1875-1985))	-	1800	-
Clause 6, Table 1, Note 1(Cr+Ni+Mo)	-	1500	-
Clause 6, Table 1, Note 2(Cu +(10xTin))	-	1000	-
Cl 7(Workmanship)	-	100	-
Cl 8(Diameter, Ovality & Weight)	-	100	-
Cl 9(UTM & HBW)	-	2500	-
Cl 12(Supplementary Requirements)	-	100	-
Cl 7(Workmanship)	-	100	-
Cl 8(Diameter, Ovality & Weight)	-	100	-
Cl 9(UTM & HBW)	-	2500	-
Cl 12(Supplementary Requirements)	-	100	-
Cl 7(Workmanship)	-	100	-
Cl 8(Diameter, Ovality & Weight)	-	100	-
Cl 9(UTM & HBW)	-	2500	-
Cl 12(Supplementary Requirements)	-	100	-
6, table 1(Chemical Composition)	-	1500	-
7(Freedom from defects)	-	100	-
8(Dimensional Properties (Diameter))	-	500	-
8(Dimensional Properties (Ovality))	-	500	-
8(Dimensional Properties (Weight per Meter, kg))	-	500	-
9.1, table 2(Tensile Strength)	-	1500	-
9.1, table 2(Yield Strength)	-	1500	-
9.1, table 2(Elongation)	-	1500	-
9.2, table 2(hardness test)	-	1000	-
12.2(Bend Test)	-	1000	-
12.3(grain size)	-	1800	-
12.4(Macrostructure)	-	1800	-
12.5(Ultrasonic Test)	-	1800	-
12.6(Magnetic Particle Test)	-	1800	-
12.7(Blue Fracture Test)	-	1800	-
Cl 12(Supplementary Requirements)	-	100	-
Cl 9(UTM & HBW)	-	2500	-
Cl 8(Diameter, Ovality & Weight)	-	100	-
Cl 7(Workmanship)	-	100	-
Cl 7(Workmanship)	-	100	-
Cl 8(Diameter, Ovality & Weight)	-	500	-
Cl 9(UTM & HBW)	-	2500	-
Cl 12(Supplementary Requirements)	-	100	-
Clause 6, Table 1, Note 1(Cr+Ni+Mo)	-	1500	-
Clause 6, Table 1, Note 2(Cu +(10xTin))	-	1500	-
9.1(Tensile Strength - IS: 1608(P1))	-	1500	-
9.1(Yield Strength-IS:1608(P1))	-	1500	-
9.1(Elongation on SoA 5.65mm GL)	-	1500	-
9.2(Hardness-HB IS:1500 (P1))	-	1000	-
12.0 & 12.2(Bend Test - IS 1599)	-	1000	-
12.0 & 12.3(Grain Size - IS 4748)	-	1800	-
12.0 & 12.4(Macrostructure- IS 11371)	-	1800	-
12.0 & 12.5(Ultrasnoic Test)	-	1800	-
12.0 & 12.6(Magnetic Particle Test - IS 10138 (P3))	-	1800	-
5(Manufacture)	-	100	-
7(Freedom from defects)	-	100	-
13(Marking)	-	100	-
12.7(Blue fracture test (IS:1875-1985))	-	1800	-
Clause 6, Table 1, Note 1(Cr+Ni+Mo)	-	1500	-
Clause 6, Table 1, Note 2(Cu +(10xTin))	-	1500	-
Cl 7(Workmanship)	-	100	-
Cl 8(Diameter, Ovality & Weight)	-	100	-
Cl 9(UTM & HBW)	-	2500	-
Cl 12(Supplementary Requirements)	-	100	-
Cl 7(Workmanship)	-	100	-
Cl 8(Diameter, Ovality & Weight)	-	100	-
Cl 9(UTM & HBW)	-	2500	-
Cl 12(Supplementary Requirements)	-	100	-
Cl 7(Workmanship)	-	100	-
Cl 8(Diameter, Ovality & Weight)	-	100	-
Cl 9(UTM & HBW)	-	2500	-
Cl 12(Supplementary Requirements)	-	100	-
6, table 1(Chemical Composition)	-	8000	-
7(Freedom from defects)	-	500	-
8(Dimensional Properties (Diameter))	-	500	-
8(Dimensional Properties (Ovality))	-	500	-
8(Dimensional Properties (Weight per Meter, kg))	-	500	-
9.1, table 2(Tensile Strength)	-	1500	-
9.1, table 2(Yield Strength)	-	1500	-
9.1, table 2(Elongation)	-	1500	-
9.2, table 2(hardness test)	-	1000	-
12.2(Bend Test)	-	1000	-
12.3(grain size)	-	1800	-
12.4(Macrostructure)	-	1800	-
12.5(Ultrasonic Test)	-	1800	-
12.6(Magnetic Particle Test)	-	1800	-
12.7(Blue Fracture Test)	-	1800	-
Cl 12(Supplementary Requirements)	-	100	-
Cl 9(UTM & HBW)	-	2500	-
Cl 8(Diameter, Ovality & Weight)	-	100	-
Cl 7(Workmanship)	-	100	-
Cl 7(Workmanship)	-	100	-
Cl 8(Diameter, Ovality & Weight)	-	100	-
Cl 9(UTM & HBW)	-	2500	-
Cl 12(Supplementary Requirements)	-	100	-
Clause 6, Table 1, Note 1(Cr+Ni+Mo)	-	1500	-
Clause 6, Table 1, Note 2(Cu +(10xTin))	-	1000	-
9.1(Tensile Strength - IS: 1608(P1))	-	1500	-
9.1(Yield Strength-IS:1608(P1))	-	1500	-
9.1(Elongation on SoA 5.65mm GL)	-	1500	-
9.2(Hardness-HB IS:1500 (P1))	-	1000	-
12.0 & 12.2(Bend Test - IS 1599)	-	1000	-
12.0 & 12.3(Grain Size - IS 4748)	-	1800	-
12.0 & 12.4(Macrostructure- IS 11371)	-	1800	-
12.0 & 12.5(Ultrasnoic Test)	-	1800	-
12.0 & 12.6(Magnetic Particle Test - IS 10138 (P3))	-	1800	-
5(Manufacture)	-	100	-
7(Freedom from defects)	-	100	-
13(Marking)	-	100	-
12.7(Blue fracture test (IS:1875-1985))	-	1800	-
Clause 6, Table 1, Note 1(Cr+Ni+Mo)	-	1500	-
Clause 6, Table 1, Note 2(Cu +(10xTin))	-	1000	-

12 Jan, 2028

-
Included w.e.f 06.06.2025

4858

TUV Rheinland (India) Pvt., Ltd., Bengaluru (6162126)

6162126

IS/IEC 61730 : PART 2 (2004)

Photovoltaic (PV) Module Safety Qualification Part 2 Requirements for Testing

1225000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1(Visual Inspection (MST 01))	-	75000	-
10.2(Accessibility test (MST 11))	-	50000	-
10.3(Cut susceptibility test (MST 12))	-	50000	-
10.4(Ground Continuity Test (MST 13))	-	75000	-
10.5(Impulse voltage test (MST 14))	-	100000	-
10.6(Dielectric withstand test (MST 16))	-	125000	-
10.7(Temperature test (MST 21))	-	150000	-
10.8(Fire test (MST 23))	-	400000	-
10.9(Reverse Current overload test (MST 26))	-	150000	-
10.10(Module breakage test (MST 32))	-	50000	-
Cl.5, Table 7(Thermal cycling (T200) (MST 51))	-	0	Testing charge for this clause included in IS 14286: 2010
Cl.5, Table 7(Thermal cycling (T50) (MST 51))	-	0	Testing charge for this clause included in IS 14286: 2010
Cl.5, Table 7(Humidity freeze (10HF) (MST 52))	-	0	Testing charge for this clause included in IS 14286: 2010
Cl.5, Table 7(Damp heat (DH1000) (MST 53))	-	0	Testing charge for this clause included in IS 14286: 2010
Cl.5, Table 7(UV resistance (MST 54))	-	0	Testing charge for this clause included in IS 14286: 2010
Cl.5, Table 7(Wet leakage current test (MST 17))	-	0	Testing charge for this clause included in IS 14286: 2010
Cl.5, Table 7(Robustness of termination test (MST 42))	-	0	Testing charge for this clause included in IS 14286: 2010
Cl.5, Table 7(Hot spot test (MST 22))	-	0	Testing charge for this clause included in IS 14286: 2010
Cl.5, Table 7(Mechanical load test (MST 34))	-	0	Testing charge for this clause included in IS 14286: 2010

10 Sep, 2027

-
-

4859

TUV Rheinland (India) Pvt., Ltd., Bengaluru (6162126)

6162126

IS/IEC 61730 : PART 1 (2004)

Photovoltaic (PV) Module Safety Qualification Part 1 Requirements for Construction

250000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Application classes)	-	25000	-
4(Construction requirements)	-	50000	-
5(Polymeric materials)	-	25000	-
6(Internal wiring and current-carrying parts)	-	25000	-
7(Connections)	-	25000	-
8(Bonding and grounding)	-	25000	-
9(Creepage and clearance distances)	-	25000	-
10(Field wiring compartments with covers)	-	25000	-
11(Marking)	-	25000	-

10 Sep, 2027

-
-

4860

TUV Rheinland (India) Pvt., Ltd., Bengaluru (6162126)

6162126

IS 14286 (2010)

Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval (First Revision)

850000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1(Visual inspection)	-	25000.00	-
10.2(Maximum power determination)	-	50000.00	-
10.3(Insulation test)	-	25000.00	-
10.4(Measurement of temperature coefficients)	-	50000.00	-
10.5(Measurement of NOCT)	-	50000.00	-
10.6(Performance at STC and NOCT)	-	10000.00	-
10.7(Performance at low irradiance)	-	7500.00	-
10.8(Outdoor exposure test)	-	7500.00	-
10.9(Hot-spot endurance test)	-	75000.00	-
10.10(UV preconditioning)	-	50000.00	-
10.11(Thermal cycling test)	-	150000.00	-
10.12(Humidity freeze test)	-	75000.00	-
10.13(Damp heat test)	-	75000.00	-
10.14(Robustness of termination test)	-	25000.00	-
10.15(Wet leakage current test)	-	25000.00	-
10.16(Mechanical load test)	-	50000.00	-
10.17(Hail test)	-	50000.00	-
10.18(Bypass diode thermal' test)	-	40000.00	-
4(Marking)	-	10000.00	-

10 Sep, 2027

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number