BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15634 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

4861

Stellar Test House, Noida

8171606

IS 5410 (2013)

Cement paint - Specification (Second Revision)

All Grade and Types

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4.8, 7.1 - Table 1 ix)(Recoating Properties)	-	500	-
Cl.4.8, 7.1 - Table 1 vi)(Resistance to dry rubbing)	-	500	-
Cl.4.8, 7.1 - Table 1 iv)(Fastness to light)	-	1000	-
Cl.4.8, 7.1 - Table 1 iii)(Colour)	-	1000	-
Cl.4.4(Lead Restriction)	-	1000	-
Cl.4.1(Composition - Hydrated Lime)	-	500	-
Cl.4.1(Composition - Portland Cement)	-	500	-
Cl.4.7(Keeping Properties)	-	500	-
Cl.4.8, 7.1 - Table 1 viii)(Pot life of mixed paint)	-	500	-
Cl.4.8, 7.1 - Table 1 vii)(Water Repellency)	-	1000	-
Cl.4.8, 7.1 - Table 1 v)(Residue on sieve (on dry material))	-	500	-
Cl.4.8, 7.1 - Table 1 ii)(Finish)	-	500	-
Cl.4.8, 7.1 - Table 1 i)(Drying Time, Hard Dry)	-	500	-
Cl.4.6(Durability)	-	1000	-
Cl.4.2(Preparation for Use)	-	200	-
Cl.4.1.1(Freedom from Organic Binders)	-	300	-

26 Sep, 2028

-
Included w.e.f. 14.08.2025

4862

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS 302 : Part 2 : Sec 13 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 13 frying pans, deep fat fryers and similar appliances

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
32(Radiation ,Toxicity and similar hazards)	-	1000	5% Discount for BIS
31(Resistance to Rusting)	-	1500	-
30(Resistance to Heat, Fire and Tracking)	-	5000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	5000	-
28(Screws & Connections)	-	1000	-
27(Provision For Earthing)	-	1000	-
26(Terminals For External Conductors)	-	2500	-
25(Supply Connection & External Flexible Cables and Cords)	-	5000	-
24(Components)	-	5000	-
23(Internal wiring)	-	2500	-
22(Construction)	-	5000	-
21(Mechanical strength)	-	1500	-
20(Stability & Mechanical Hazards)	-	1500	-
19(Abnormal Operation)	-	10000	-
18(Endurance)	-	100	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	1500	-
16(Leakage Current and Electric Strength)	-	1000	-
15(Moisture Resistance)	-	5000	-
14(Transient Over Voltage)	-	1500	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	1000	-
11(Temperature Rise/Heating)	-	5000	-
10(Power Input)	-	5000	-
9(Starting Of Motor Operated Appliances)	-	2500	-
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	2500	-
7(Marking/ Marking & Instructions)	-	1000	-
6(Classification)	-	500	-
5(Rating)	-	500	-
19.11.4.1(Electrostatic discharges)	-	25000	-
19.11.4.2(Radiated fields)	-	45000	-
19.11.4.3(Fast transient bursts)	-	25000	-
19.11.4.4(Surge immunity test)	-	25000	-
19.11.4.5(Immunity to conducted discharges)	-	30000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	25000	-
19.11.4.7(Harmonics)	-	25000	-

-
Included w.e.f. 18.08.2025

4863

Sleen India Biz venture Private Limited, Agra

9139736

IS 4605 (2020)

Crepe Bandage - Specification ( Second Revision )

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.5(Breaking Load)	-	450	-
8.3( Elasticity)	-	450	-
8.2( Weight per Unit Area)	-	250	-
8.1( Threads per Stated Length 2)Ends)	-	250	-
8.1( Threads per Stated Length 1)Ends)	-	0	Complete test price for cl. 8.1 is 500/-.
6.0( Workmanship and finish )	-	250	-
5.2(The selvedge )	-	250	-
5.1.2 (Weft Yarns)	-	400	-
5.1.1 (Warp Yarns)	-	0	Complete test price for cl. 5.12 is 500/-.
4 (Annexure B)(DIMENSIONS 2) Length (Stretched))	-	250	-
4.0( DIMENSIONS 1)Width (cm) (Unstretched))	-	250	-
3.0(MATERIAL)	-	400	-
Clause.8.7(Ether Soluble Substances)	-	400	-
Clause.8.6(Water Soluble Substances)	-	400	-
Clause.8.4(Chemical Neutrality)	-	500	-
Clause 3(Material used in manufacturing of crepe bandage)	-	0	-
Clause 3(Quality of Rayon)	-	0	-
Clause 4(Dimensions (width, cm and length , m))	-	0	-
Clause 5.1.1(Warp Yarns)	-	0	-
Clause 5.1.2(Weft Yarns)	-	0	-
Clause 8.1(Threads per Stated Length)	-	0	-
Clause 8.2(Weight per Unit Area)	-	0	-
Clause 8.3(Elasticity)	-	0	-
Clause 8.4(PH for Chemical neutrality)	-	0	-
Clause 8.5(Breaking Load , N)	-	0	-
Clause 8.6(Water Soluble Substances , percent)	-	0	-
Clause 8.7(Ether Soluble Substances, percent)	-	0	-

-
Included w.e.f. 04.08.2025

4864

Ace Test Labs & Metrology Pvt. Ltd., Sonipat

9162826

IS/IEC 62368 : Part 1 (2023)

Audio Video Information and Communication Technology Equipment - Part 1: Safety Requirements (Second Revision)

95000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(General- materials, components)	-	2000	-
Cl-4.2(Energy source classifications)	-	2000	-
Cl-4.3(Protection against energy sources)	-	2000	-
Cl-4.4(Safeguards)	-	2000	-
Cl-4.5(Explosion)	-	2000	-
Cl-4.6(Fixing of conductors and conductive parts)	-	2000	-
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	2000	-
Cl-4.8(Equipment containing coin or button cell batteries)	-	2000	-
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	2000	-
Cl-4.10(Components requirements)	-	2000	-
Cl-5.1(General- Electrically-caused injury)	-	2000	-
Cl-5.2(Classification and limits of electrical energy sources)	-	2000	-
Cl-5.3(Protection against electrical energy sources)	-	2000	-
Cl-5.4(Insulation materials and requirements)	-	2000	-
Cl-5.5(Components as safeguards)	-	2000	-
Cl-5.6(Protective conductor)	-	2000	-
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	2000	-
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	5000	-
Cl-6.1(General- Electrically-caused fire)	-	5000	-
Cl-6.2(Classification of power sources and potential ignition sources)	-	5000	-
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	5000	-
Cl-6.4(Safeguards against fire under single fault conditions)	-	5000	-
Cl-6.5(Internal and external wiring)	-	5000	-
Cl-7.1(General- Injury caused by hazardous substances)	-	5000	-
Cl-7.2(Reduction of exposure to hazardous substances)	-	5000	-
Cl-7.3(Ozone exposure)	-	5000	-
Cl-7.4(Use of personal safeguards or personal protective equipment (PPE)	-	5000	-
Cl-7.5(Use of instructional safeguards and instructions)	-	5000	-
Cl-8.1(General- Mechanically-caused injury)	-	5000	-
Cl-8.2(Mechanical energy source classifications)	-	5000	-
Cl-8.3(Safeguards against mechanical energy sources)	-	5000	-
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	5000	-
Cl-8.5(Safeguards against moving parts)	-	5000	-
Cl-8.6(Stability of equipment)	-	5000	-
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	5000	-
Cl-8.8(Handle strength)	-	5000	-
Cl-8.9(Wheels or casters attachment requirements)	-	5000	-
Cl-8.10(Carts, stands, and similar carriers)	-	5000	-
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	5000	-
Cl-9.1(General-Thermal burn injury)	-	5000	-
Cl-9.2(Thermal energy source classifications)	-	5000	-
Cl-9.3(Touch temperature limits)	-	5000	-
Cl-9.4(Safeguards against thermal energy sources)	-	5000	-
Cl-9.5(Requirements for safeguards)	-	5000	-
Cl-9.6(Requirements for wireless power transmitters)	-	5000	-
Cl-10.1(General-Radiation)	-	5000	-
Cl-10.2(Radiation energy source classifications)	-	5000	-
Cl-10.3(Safeguards against laser radiation)	-	5000	-
Cl-10.4("Safeguards against optical radiation from lamps and lamp systems (including LED types)")	-	5000	-
Cl-10.5(Safeguards against X-radiation)	-	5000	-
Cl-10.6(Safeguards against acoustic energy sources)	-	5000	-
Annex A(Examples of equipment within the scope of this document)	-	5000	-
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	5000	-
Annex B-2(Normal operating conditions)	-	5000	-
Annex B-3(Simulated abnormal operating conditions)	-	5000	-
Annex B-4(Simulated single fault conditions)	-	5000	-
Annex C-1(Protection of materials in equipment from UV radiation)	-	5000	-
Annex C-2(UV light conditioning test)	-	5000	-
Annex D-1(Impulse test generators)	-	5000	-
Annex D-2(Antenna interface test generator)	-	5000	-
Annex D-3(Electronic pulse generator)	-	5000	-
Annex E-1(Electrical energy source classification for audio signals)	-	5000	-
Annex E-2(Audio signals used during test)	-	5000	-
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	5000	-
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	5000	-
Annex F-2(Letter symbols and graphical symbols)	-	5000	-
Annex F-3(Equipment markings)	-	5000	-
Annex F-4(Instructions)	-	5000	-
Annex F-5(Instructional safeguards)	-	5000	-
Annex G-1(Switches)	-	5000	-
Annex G-2(Relays)	-	5000	-
Annex G-3(Protective devices)	-	5000	-
Annex G-4(Connectors)	-	5000	-
Annex G-5(Wound components)	-	5000	-
Annex G-6(Wire insulation)	-	5000	-
Annex G-7(Mains power supply cords and interconnection cables)	-	5000	-
Annex G-8(Varistors)	-	5000	-
Annex G-9(Integrated circuit (IC) current limiters)	-	5000	-
Annex G-10(Resistors)	-	5000	-
Annex G-11(Capacitors and RC units)	-	5000	-
Annex G-12(Optocouplers)	-	5000	-
Annex G-13(Printed boards)	-	5000	-
Annex G-14(Coatings on component terminals)	-	5000	-
Annex G-15(Pressurized liquid filled components or LFC assemblies)	-	5000	-
Annex G-16(IC that includes a capacitor discharge function (ICX))	-	5000	-
Annex H-1(General- Criteria for telephone ringing signals)	-	5000	-
Annex H-2(Method A)	-	5000	-
Annex H-3(Method B)	-	5000	-
Annex I(Overvoltage categories (see IEC 60364-4-44))	-	5000	-
Annex J-1(General-Insulated winding wires for use without interleaved insulation)	-	5000	-
Annex J-2(Type tests)	-	5000	-
Annex J-3(Testing during manufacturing)	-	5000	-
Annex K-1(General- Safety interlocks)	-	5000	-
Annex K-2(Components of the safety interlock safeguard mechanism)	-	5000	-
Annex K-3(Inadvertent change of operating mode)	-	5000	-
Annex K-4(Interlock safeguard override)	-	5000	-
Annex K-5(Fail-safe)	-	5000	-
Annex K-6(Mechanically operated safety interlocks)	-	5000	-
Annex K-7(Interlock circuit isolation)	-	5000	-
Annex L-1(General requirements)	-	5000	-
Annex L-2(Permanently connected equipment)	-	5000	-
Annex L-3()	-	5000	-
Annex L-4(Single-phase equipment)	-	5000	-
Annex L-5(Three-phase equipment)	-	5000	-
Annex L-6(Switches as disconnect devices)	-	5000	-
Annex L-7(Plugs as disconnect devices)	-	5000	-
Annex L-8(Multiple power sources)	-	5000	-
Annex L-9(Compliance criteria)	-	5000	-
Annex M-1(General requirements)	-	5000	-
Annex M-2(Safety of batteries and their cells)	-	5000	-
Annex M-3(Protection circuits for batteries provided within the equipment)	-	5000	-
Annex M-4(Additional safeguards for equipment containing a secondary lithium battery)	-	5000	-
Annex M-5(Risk of burn due to short-circuit during carrying)	-	5000	-
Annex M-6(Safeguards against short-circuits)	-	5000	-
Annex M-7(Risk of explosion from lead acid and NiCd batteries)	-	5000	-
Annex M-8("Protection against internal ignition from external spark sources of rechargeable batteries with aqueous electrolyte")	-	5000	-
Annex M-9(Preventing electrolyte spillage)	-	5000	-
Annex M-10(Instructions to prevent reasonably foreseeable misuse)	-	5000	-
Annex N(Electrochemical potentials (V))	-	5000	-
Annex O(Measurement of creepage distances and clearances)	-	5000	-
Annex P-1(General-Safeguards against conductive objects)	-	5000	-
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	5000	-
Annex P-3(Safeguards against spillage of internal liquids)	-	5000	-
Annex P-4(Metallized coatings and adhesives securing parts)	-	5000	-
Annex Q-1(Limited power source)	-	5000	-
Annex Q-2(Test for external circuits – paired conductor cable)	-	5000	-
Annex R(Limited short-circuit test)	-	5000	-
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	5000	-
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	5000	-
Annex S-3(Flammability tests for the bottom of a fire enclosure)	-	5000	-
Annex S-4(Flammability classification of materials)	-	5000	-
Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W)	-	5000	-
Annex S-6(Grille covering material, cloth, and reticulated foam)	-	5000	-
Annex T-1(General-Mechanical strength tests)	-	5000	-
Annex T-2(Steady force test, 10 N)	-	5000	-
Annex T-3(Steady force test, 30 N)	-	5000	-
Annex T-4(Steady force test, 100 N)	-	5000	-
Annex T-5(Steady force test, 250 N)	-	5000	-
Annex T-6(Enclosure impact test)	-	5000	-
Annex T-7(Drop test)	-	5000	-
Annex T-8(Stress relief test)	-	5000	-
Annex T-9(Glass impact test)	-	5000	-
Annex T-10(Glass fragmentation test)	-	5000	-
Annex T-11(Test for telescoping or rod antennas)	-	5000	-
Annex U("Mechanical strength of CRTs and protection against the effects of implosion")	-	5000	-
Annex V-1(Accessible parts of equipment)	-	5000	-
Annex V-2(Accessible part criterion)	-	5000	-
Annex W(Comparison of terms introduced in this document)	-	5000	-
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	5000	-
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	5000	-
Annex Y-2(Resistance to UV radiation)	-	5000	-
Annex Y-3(Resistance to corrosion)	-	5000	-
Annex Y-4(Gaskets)	-	5000	-
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	5000	-
Annex Y-6(Mechanical strength of enclosures)	-	5000	-
Cl-4.1(General- materials, components)	-	5000	-
Cl-4.2(Energy source classifications)	-	5000	-
Cl-4.3(Protection against energy sources)	-	5000	-
Cl-4.4(Safeguards)	-	5000	-
Cl-4.5(Explosion)	-	5000	-
Cl-4.6(Fixing of conductors and conductive parts)	-	5000	-
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	5000	-
Cl-4.8(Equipment containing coin or button cell batteries)	-	5000	-
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	5000	-
Cl-4.10(Components requirements)	-	5000	-
Cl-5.1(General- Electrically-caused injury)	-	5000	-
Cl-5.2(Classification and limits of electrical energy sources)	-	5000	-
Cl-5.3(Protection against electrical energy sources)	-	5000	-
Cl-5.4(Insulation materials and requirements)	-	5000	-
Cl-5.5(Components as safeguards)	-	5000	-
Cl-5.6(Protective conductor)	-	5000	-
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	5000	-
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	5000	-
Cl-6.1(General- Electrically-caused fire)	-	5000	-
Cl-6.2(Classification of power sources and potential ignition sources)	-	5000	-
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	5000	-
Cl-6.4(Safeguards against fire under single fault conditions)	-	5000	-
Cl-6.5(Internal and external wiring)	-	5000	-
Cl-7.1(General- Injury caused by hazardous substances)	-	5000	-
Cl-7.2(Reduction of exposure to hazardous substances)	-	5000	-
Cl-7.3(Ozone exposure)	-	5000	-
Cl-7.4(Use of personal safeguards or personal protective equipment (PPE)	-	5000	-
Cl-7.5(Use of instructional safeguards and instructions)	-	5000	-
Cl-8.1(General- Mechanically-caused injury)	-	5000	-
Cl-8.2(Mechanical energy source classifications)	-	5000	-
Cl-8.3(Safeguards against mechanical energy sources)	-	5000	-
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	5000	-
Cl-8.5(Safeguards against moving parts)	-	5000	-
Cl-8.6(Stability of equipment)	-	5000	-
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	5000	-
Cl-8.8(Handle strength)	-	5000	-
Cl-8.9(Wheels or casters attachment requirements)	-	5000	-
Cl-8.10(Carts, stands, and similar carriers)	-	5000	-
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	5000	-
Cl-9.1(General-Thermal burn injury)	-	5000	-
Cl-9.2(Thermal energy source classifications)	-	5000	-
Cl-9.3(Touch temperature limits)	-	5000	-
Cl-9.4(Safeguards against thermal energy sources)	-	5000	-
Cl-9.5(Requirements for safeguards)	-	5000	-
Cl-9.6(Requirements for wireless power transmitters)	-	5000	-
Cl-10.1(General-Radiation)	-	5000	-
Cl-10.2(Radiation energy source classifications)	-	5000	-
Cl-10.3(Safeguards against laser radiation)	-	5000	-
Cl-10.4("Safeguards against optical radiation from lamps and lamp systems (including LED types)")	-	5000	-
Cl-10.5(Safeguards against X-radiation)	-	5000	-
Cl-10.6(Safeguards against acoustic energy sources)	-	5000	-
Annex A(Examples of equipment within the scope of this document)	-	5000	-
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	5000	-
Annex B-2(Normal operating conditions)	-	5000	-
Annex B-3(Simulated abnormal operating conditions)	-	5000	-
Annex B-4(Simulated single fault conditions)	-	5000	-
Annex C-1(Protection of materials in equipment from UV radiation)	-	5000	-
Annex C-2(UV light conditioning test)	-	5000	-
Annex D-1(Impulse test generators)	-	5000	-
Annex D-2(Antenna interface test generator)	-	5000	-
Annex D-3(Electronic pulse generator)	-	5000	-
Annex E-1(Electrical energy source classification for audio signals)	-	5000	-
Annex E-2(Audio signals used during test)	-	5000	-
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	5000	-
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	5000	-
Annex F-2(Letter symbols and graphical symbols)	-	5000	-
Annex F-3(Equipment markings)	-	5000	-
Annex F-4(Instructions)	-	5000	-
Annex F-5(Instructional safeguards)	-	5000	-
Annex G-1(Switches)	-	5000	-
Annex G-2(Relays)	-	5000	-
Annex G-3(Protective devices)	-	5000	-
Annex G-4(Connectors)	-	5000	-
Annex G-5(Wound components)	-	5000	-
Annex G-6(Wire insulation)	-	5000	-
Annex G-7(Mains power supply cords and interconnection cables)	-	5000	-
Annex G-8(Varistors)	-	5000	-
Annex G-9(Integrated circuit (IC) current limiters)	-	5000	-
Annex G-10(Resistors)	-	5000	-
Annex G-11(Capacitors and RC units)	-	5000	-
Annex G-12(Optocouplers)	-	5000	-
Annex G-13(Printed boards)	-	5000	-
Annex G-14(Coatings on component terminals)	-	5000	-
Annex G-15(Pressurized liquid filled components or LFC assemblies)	-	5000	-
Annex G-16(IC that includes a capacitor discharge function (ICX))	-	5000	-
Annex H-1(General- Criteria for telephone ringing signals)	-	5000	-
Annex H-2(Method A)	-	5000	-
Annex H-3(Method B)	-	5000	-
Annex I(Overvoltage categories (see IEC 60364-4-44))	-	5000	-
Annex J-1(General-Insulated winding wires for use without interleaved insulation)	-	5000	-
Annex J-2(Type tests)	-	5000	-
Annex J-3(Testing during manufacturing)	-	5000	-
Annex K-1(General- Safety interlocks)	-	5000	-
Annex K-2(Components of the safety interlock safeguard mechanism)	-	5000	-
Annex K-3(Inadvertent change of operating mode)	-	5000	-
Annex K-4(Interlock safeguard override)	-	5000	-
Annex K-5(Fail-safe)	-	5000	-
Annex K-6(Mechanically operated safety interlocks)	-	5000	-
Annex K-7(Interlock circuit isolation)	-	5000	-
Annex L-1(General requirements)	-	5000	-
Annex L-2(Permanently connected equipment)	-	5000	-
Annex L-3()	-	5000	-
Annex L-4(Single-phase equipment)	-	5000	-
Annex L-5(Three-phase equipment)	-	5000	-
Annex L-6(Switches as disconnect devices)	-	5000	-
Annex L-7(Plugs as disconnect devices)	-	5000	-
Annex L-8(Multiple power sources)	-	5000	-
Annex L-9(Compliance criteria)	-	5000	-
Annex M-1(General requirements)	-	5000	-
Annex M-2(Safety of batteries and their cells)	-	5000	-
Annex M-3(Protection circuits for batteries provided within the equipment)	-	5000	-
Annex M-4(Additional safeguards for equipment containing a secondary lithium battery)	-	5000	-
Annex M-5(Risk of burn due to short-circuit during carrying)	-	5000	-
Annex M-6(Safeguards against short-circuits)	-	5000	-
Annex M-7(Risk of explosion from lead acid and NiCd batteries)	-	5000	-
Annex M-8("Protection against internal ignition from external spark sources of rechargeable batteries with aqueous electrolyte")	-	5000	-
Annex M-9(Preventing electrolyte spillage)	-	5000	-
Annex M-10(Instructions to prevent reasonably foreseeable misuse)	-	5000	-
Annex N(Electrochemical potentials (V))	-	5000	-
Annex O(Measurement of creepage distances and clearances)	-	5000	-
Annex P-1(General-Safeguards against conductive objects)	-	5000	-
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	5000	-
Annex P-3(Safeguards against spillage of internal liquids)	-	5000	-
Annex P-4(Metallized coatings and adhesives securing parts)	-	5000	-
Annex Q-1(Limited power source)	-	5000	-
Annex Q-2(Test for external circuits – paired conductor cable)	-	5000	-
Annex R(Limited short-circuit test)	-	5000	-
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	5000	-
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	5000	-
Annex S-3(Flammability tests for the bottom of a fire enclosure)	-	5000	-
Annex S-4(Flammability classification of materials)	-	5000	-
Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W)	-	5000	-
Annex S-6(Grille covering material, cloth, and reticulated foam)	-	5000	-
Annex T-1(General-Mechanical strength tests)	-	5000	-
Annex T-2(Steady force test, 10 N)	-	5000	-
Annex T-3(Steady force test, 30 N)	-	5000	-
Annex T-4(Steady force test, 100 N)	-	5000	-
Annex T-5(Steady force test, 250 N)	-	5000	-
Annex T-6(Enclosure impact test)	-	5000	-
Annex T-7(Drop test)	-	5000	-
Annex T-8(Stress relief test)	-	5000	-
Annex T-9(Glass impact test)	-	5000	-
Annex T-10(Glass fragmentation test)	-	5000	-
Annex T-11(Test for telescoping or rod antennas)	-	5000	-
Annex V-1(Accessible parts of equipment)	-	5000	-
Annex V-2(Accessible part criterion)	-	5000	-
Annex W(Comparison of terms introduced in this document)	-	5000	-
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	5000	-
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	5000	-
Annex Y-2(Resistance to UV radiation)	-	5000	-
Annex Y-3(Resistance to corrosion)	-	5000	-
Annex Y-4(Gaskets)	-	5000	-
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	5000	-
Annex Y-6(Mechanical strength of enclosures)	-	5000	-
Cl-4.1(General- materials, components)	-	5000	-
Cl-4.2(Energy source classifications)	-	5000	-
Cl-4.3(Protection against energy sources)	-	5000	-
Cl-4.4(Safeguards)	-	5000	-
Cl-4.5(Explosion)	-	5000	-
Cl-4.6(Fixing of conductors and conductive parts)	-	5000	-
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	5000	-
Cl-4.8(Equipment containing coin or button cell batteries)	-	5000	-
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	5000	-
Cl-4.10(Components requirements)	-	5000	-
Cl-5.1(General- Electrically-caused injury)	-	5000	-
Cl-5.2(Classification and limits of electrical energy sources)	-	5000	-
Cl-5.3(Protection against electrical energy sources)	-	5000	-
Cl-5.4(Insulation materials and requirements)	-	5000	-
Cl-5.5(Components as safeguards)	-	5000	-
Cl-5.6(Protective conductor)	-	5000	-
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	5000	-
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	5000	-
Cl-6.1(General- Electrically-caused fire)	-	5000	-
Cl-6.2(Classification of power sources and potential ignition sources)	-	5000	-
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	5000	-
Cl-6.4(Safeguards against fire under single fault conditions)	-	5000	-
Cl-6.5(Internal and external wiring)	-	5000	-
Cl-7.1(General- Injury caused by hazardous substances)	-	5000	-
Cl-7.2(Reduction of exposure to hazardous substances)	-	5000	-
Cl-7.3(Ozone exposure)	-	5000	-
Cl-7.4(Use of personal safeguards or personal protective equipment (PPE)	-	5000	-
Cl-7.5(Use of instructional safeguards and instructions)	-	5000	-
Cl-8.1(General- Mechanically-caused injury)	-	5000	-
Cl-8.2(Mechanical energy source classifications)	-	5000	-
Cl-8.3(Safeguards against mechanical energy sources)	-	5000	-
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	5000	-
Cl-8.5(Safeguards against moving parts)	-	5000	-
Cl-8.6(Stability of equipment)	-	5000	-
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	5000	-
Cl-8.8(Handle strength)	-	5000	-
Cl-8.9(Wheels or casters attachment requirements)	-	5000	-
Cl-8.10(Carts, stands, and similar carriers)	-	5000	-
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	5000	-
Cl-9.1(General-Thermal burn injury)	-	5000	-
Cl-9.2(Thermal energy source classifications)	-	5000	-
Cl-9.3(Touch temperature limits)	-	5000	-
Cl-9.4(Safeguards against thermal energy sources)	-	5000	-
Cl-9.5(Requirements for safeguards)	-	5000	-
Cl-9.6(Requirements for wireless power transmitters)	-	5000	-
Cl-10.1(General-Radiation)	-	5000	-
Cl-10.2(Radiation energy source classifications)	-	5000	-
Cl-10.3(Safeguards against laser radiation)	-	5000	-
Cl-10.4("Safeguards against optical radiation from lamps and lamp systems (including LED types)")	-	5000	-
Cl-10.5(Safeguards against X-radiation)	-	5000	-
Cl-10.6(Safeguards against acoustic energy sources)	-	5000	-
Annex A(Examples of equipment within the scope of this document)	-	5000	-
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	5000	-
Annex B-2(Normal operating conditions)	-	5000	-
Annex B-3(Simulated abnormal operating conditions)	-	5000	-
Annex B-4(Simulated single fault conditions)	-	5000	-
Annex C-1(Protection of materials in equipment from UV radiation)	-	5000	-
Annex C-2(UV light conditioning test)	-	5000	-
Annex D-1(Impulse test generators)	-	5000	-
Annex D-2(Antenna interface test generator)	-	5000	-
Annex E-1(Electrical energy source classification for audio signals)	-	5000	-
Annex E-2(Audio signals used during test)	-	5000	-
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	5000	-
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	5000	-
Annex F-2(Letter symbols and graphical symbols)	-	5000	-
Annex F-3(Equipment markings)	-	5000	-
Annex F-4(Instructions)	-	5000	-
Annex F-5(Instructional safeguards)	-	5000	-
Annex G-1(Switches)	-	5000	-
Annex G-2(Relays)	-	5000	-
Annex G-3(Protective devices)	-	5000	-
Annex G-4(Connectors)	-	5000	-
Annex G-5(Wound components)	-	5000	-
Annex G-6(Wire insulation)	-	5000	-
Annex G-7(Mains power supply cords and interconnection cables)	-	5000	-
Annex G-8(Varistors)	-	5000	-
Annex G-9(Integrated circuit (IC) current limiters)	-	5000	-
Annex G-10(Resistors)	-	5000	-
Annex G-11(Capacitors and RC units)	-	5000	-
Annex G-12(Optocouplers)	-	5000	-
Annex G-13(Printed boards)	-	5000	-
Annex G-14(Coatings on component terminals)	-	5000	-
Annex G-15(Pressurized liquid filled components or LFC assemblies)	-	5000	-
Annex G-16(IC that includes a capacitor discharge function (ICX))	-	5000	-
Annex H-1(General- Criteria for telephone ringing signals)	-	5000	-
Annex H-2(Method A)	-	5000	-
Annex H-3(Method B)	-	5000	-
Annex I(Overvoltage categories (see IEC 60364-4-44))	-	5000	-
Annex J-1(General-Insulated winding wires for use without interleaved insulation)	-	5000	-
Annex J-2(Type tests)	-	5000	-
Annex J-3(Testing during manufacturing)	-	5000	-
Annex K-1(General- Safety interlocks)	-	5000	-
Annex K-2(Components of the safety interlock safeguard mechanism)	-	5000	-
Annex K-3(Inadvertent change of operating mode)	-	5000	-
Annex K-4(Interlock safeguard override)	-	5000	-
Annex K-5(Fail-safe)	-	5000	-
Annex K-6(Mechanically operated safety interlocks)	-	5000	-
Annex K-7(Interlock circuit isolation)	-	5000	-
Annex L-1(General requirements)	-	5000	-
Annex L-2(Permanently connected equipment)	-	5000	-
Annex L-3()	-	5000	-
Annex L-4(Single-phase equipment)	-	5000	-
Annex L-5(Three-phase equipment)	-	5000	-
Annex L-6(Switches as disconnect devices)	-	5000	-
Annex L-7(Plugs as disconnect devices)	-	5000	-
Annex L-8(Multiple power sources)	-	5000	-
Annex L-9(Compliance criteria)	-	5000	-
Annex M-1(General requirements)	-	5000	-
Annex M-2(Safety of batteries and their cells)	-	5000	-
Annex M-3(Protection circuits for batteries provided within the equipment)	-	5000	-
Annex M-4(Additional safeguards for equipment containing a secondary lithium battery)	-	5000	-
Annex M-5(Risk of burn due to short-circuit during carrying)	-	5000	-
Annex M-6(Safeguards against short-circuits)	-	5000	-
Annex M-7(Risk of explosion from lead acid and NiCd batteries)	-	5000	-
Annex M-8("Protection against internal ignition from external spark sources of rechargeable batteries with aqueous electrolyte")	-	5000	-
Annex M-9(Preventing electrolyte spillage)	-	5000	-
Annex M-10(Instructions to prevent reasonably foreseeable misuse)	-	5000	-
Annex N(Electrochemical potentials (V))	-	5000	-
Annex O(Measurement of creepage distances and clearances)	-	5000	-
Annex P-1(General-Safeguards against conductive objects)	-	5000	-
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	5000	-
Annex P-3(Safeguards against spillage of internal liquids)	-	5000	-
Annex P-4(Metallized coatings and adhesives securing parts)	-	5000	-
Annex Q-1(Limited power source)	-	5000	-
Annex Q-2(Test for external circuits – paired conductor cable)	-	5000	-
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	5000	-
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	5000	-
Annex S-3(Flammability tests for the bottom of a fire enclosure)	-	5000	-
Annex S-4(Flammability classification of materials)	-	5000	-
Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W)	-	5000	-
Annex S-6(Grille covering material, cloth, and reticulated foam)	-	5000	-
Annex T-1(General-Mechanical strength tests)	-	5000	-
Annex T-2(Steady force test, 10 N)	-	5000	-
Annex T-3(Steady force test, 30 N)	-	5000	-
Annex T-4(Steady force test, 100 N)	-	5000	-
Annex T-5(Steady force test, 250 N)	-	5000	-
Annex T-6(Enclosure impact test)	-	5000	-
Annex T-7(Drop test)	-	5000	-
Annex T-8(Stress relief test)	-	5000	-
Annex T-9(Glass impact test)	-	5000	-
Annex T-10(Glass fragmentation test)	-	5000	-
Annex T-11(Test for telescoping or rod antennas)	-	5000	-
Annex V-1(Accessible parts of equipment)	-	5000	-
Annex V-2(Accessible part criterion)	-	5000	-
Annex W(Comparison of terms introduced in this document)	-	5000	-
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	5000	-
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	5000	-
Annex Y-2(Resistance to UV radiation)	-	5000	-
Annex Y-3(Resistance to corrosion)	-	5000	-
Annex Y-4(Gaskets)	-	5000	-
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	5000	-
Annex Y-6(Mechanical strength of enclosures)	-	5000	-

14 Nov, 2027

-
Included w.e.f 05.12.2025 Exclusion: Annex U ("Mechanical strength of CRTs and protection against the effects of implosion"), Annex D-3 (Electronic pulse generator), Annex R (Limited short-circuit test)

4865

National Test House (NR) - NTH, Ghaziabad

8101304

IS 5557 : Part 1 (2024)

All Rubber Gum Boots and Ankle Boots Part 1 Safety and Protective

25000 View breakup
-

Clause No.	Exclusion	Remark
Cl-5(Design)	-	-
6(Sizes and Fittines)	-	-
7(Consturction)	-	-
8.1(Lining Material)	-	-
8.2, Table-1 (i)(Width, mm, Min)	-	-
8.2, Table-1 (ii)(Breaking load, N, Min (50 cm grip length test specimen))	-	-
8.3, Table-2 (i)(Sewing thread for piping/binding")	-	-
8.4(Use of Rubber material)	-	-
8.4.1, Table-3 (i)(Hardness, (IRHD))	-	-
8.4.1, Table-3 (ii)(Change in hardness after accelerated ageing at 100 ⁰C ± 2 ⁰C for 24 h)	-	-
8.5(Upper material)	-	-
8.5.1(Tensile Strength of upper)	-	-
8.5.2(Thickness)	-	-
8.5.3(Flexing Resistance)	-	-
8.5.4(Abrasion Resistance)	-	-
8.6.1(Thickness of Outsole)	-	-
8.6.2(Tear Strength)	-	-
8.6.5(Inter layer Bond Strength of outsole)	-	-
8.6.3(Abrasion Resistance of Outsole)	-	-
Cl-8.7(Insocks material)	-	-
8.7.1(Thickness of Insocks)	-	-
Cl-8.7.2(Abrasion Resistance of Insock)	-	-
Cl-8.8.1(Outsole/Heel)	-	-
Cl-8.9(Leak Proof Test)	-	-
8.10(Height of Upper)	-	-
8.11(Adhesion Test for Rubberized Textile Upper)	-	-
Cl-8.12(Upper Outsole Bond Strength)	-	-
Cl-8.13(Internal Length of Toe Cap)	-	-
Cl-8.14(Impact Resistance of Safety Footwear)	-	-
Cl-8.15(Compression Resistance of Safety Footwear)	-	-
8.16(Banned Chemicals)	-	-
8.17(Ceramic Tile Floor with sodium lauryl sulphate (NaLS))	-	-
8.17(Steel Floor with Glycerine)	-	-
8.18(Corrosion Resistant Test for Toe Caps)	-	-
9.1(Penetration Resistance)	-	-
9.2(Antistatic Footwear)	-	-
9.3(Flame Resistance Property)	-	-
9.4(Electrical Resistance)	-	-
9.5(Resistance to Acid and Alkali- Limited contact with chemicals),)	-	-
9.5(Resistance to Acid and Alkali- Prolonged contact with chemicals)	-	-
9.6(Resistance to Fuel Oil)	-	-
11.2(Marking)	-	-
8.6.4(Flexing Resistance)	-	-
Cl-5(Design)	-	-
6(Sizes and Fittines)	-	-
7(Consturction)	-	-
8.1(Lining Material)	-	-
8.2, Table-1 (i)(Width, mm, Min)	-	-
8.2, Table-1 (ii)(Breaking load, N, Min (50 cm grip length test specimen))	-	-
8.3, Table-2 (i)(Sewing thread for piping/binding")	-	-
8.4(Use of Rubber material)	-	-
8.4.1, Table-3 (i)(Hardness, (IRHD))	-	-
8.4.1, Table-3 (ii)(Change in hardness after accelerated ageing at 100 ⁰C ± 2 ⁰C for 24 h)	-	-
8.5(Upper material)	-	-
8.5.1(Tensile Strength of upper)	-	-
8.5.2(Thickness)	-	-
8.5.3(Flexing Resistance)	-	-
8.5.4(Abrasion Resistance)	-	-
8.6.1(Thickness of Outsole)	-	-
8.6.2(Tear Strength)	-	-
8.6.5(Inter layer Bond Strength of outsole)	-	-
8.6.3(Abrasion Resistance of Outsole)	-	-
Cl-8.7(Insocks material)	-	-
8.7.1(Thickness of Insocks)	-	-
Cl-8.7.2(Abrasion Resistance of Insock)	-	-
Cl-8.8.1(Outsole/Heel)	-	-
Cl-8.9(Leak Proof Test)	-	-
8.10(Height of Upper)	-	-
8.11(Adhesion Test for Rubberized Textile Upper)	-	-
Cl-8.12(Upper Outsole Bond Strength)	-	-
Cl-8.13(Internal Length of Toe Cap)	-	-
Cl-8.14(Impact Resistance of Safety Footwear)	-	-
Cl-8.15(Compression Resistance of Safety Footwear)	-	-
8.16(Banned Chemicals)	-	-
8.17(Ceramic Tile Floor with sodium lauryl sulphate (NaLS))	-	-
8.17(Steel Floor with Glycerine)	-	-
8.18(Corrosion Resistant Test for Toe Caps)	-	-
9.1(Penetration Resistance)	-	-
9.2(Antistatic Footwear)	-	-
9.3(Flame Resistance Property)	-	-
9.4(Electrical Resistance)	-	-
9.5(Resistance to Acid and Alkali- Limited contact with chemicals),)	-	-
9.5(Resistance to Acid and Alkali- Prolonged contact with chemicals)	-	-
9.6(Resistance to Fuel Oil)	-	-
11.2(Marking)	-	-
8.6.4(Flexing Resistance)	-	-

-
Included w.e.f.18.08.2025

4866

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 12171 (2024)

Cotton Bales Specification Fourth Revision

All

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1.1(Staple Length)	-	500	-
Cl-5.1.2(Trash Content)	-	500	-
Cl-5.1.3(Moisture Content)	-	500	-
Cl-5.1.4(Strength of Fibre)	-	500	-
Cl-5.1.5(Micronaire Value)	-	500	-
Cl-5.1.6(Alternate Variety of the ginned cotton)	-	500	-
Cl-5.2.1(Dimensions)	-	500	-
Cl-5.2.2(Mass (Weight))	-	500	-
Cl-5.2.3(Bailing/Pressing)	-	500	-
Cl-5.2.3.1 (a)(Cotton fabric)	-	500	-
Cl-5.2.3.1 (b)(Baling hoops)	-	500	-
Cl-5.2.3.1 (c)(Cotton twine-Linear density)	-	500	-
Cl-5.2.3.1 (c)(Cotton twine- Breaking Load)	-	500	-
Cl-6(Marking)	-	500	-
5.1.1(Staple Length)	-	500	-
5.1.2(Trash Content)	-	500	-
5.1.3(Moisture Content)	-	500	-
5.1.4(Strength of Fibre)	-	500	-
5.1.5(Micronaire Value)	-	1000	-
Cl-5.1.1(Staple Length)	-	500	-
Cl-5.1.2(Trash Content)	-	500	-
Cl-5.1.3(Moisture Content)	-	500	-
Cl-5.1.4(Strength of Fibre)	-	500	-
Cl-5.1.5(Micronaire Value)	-	500	-
Cl-5.1.6(Alternate Variety of the ginned cotton)	-	500	-
Cl-5.2.1(Dimensions)	-	500	-
Cl-5.2.2(Mass (Weight))	-	500	-
Cl-5.2.3(Bailing/Pressing)	-	500	-
Cl-5.2.3.1 (a)(Cotton fabric)	-	500	-
Cl-5.2.3.1 (b)(Baling hoops)	-	500	-
Cl-5.2.3.1 (c)(Cotton twine-Linear density)	-	500	-
Cl-5.2.3.1 (c)(Cotton twine- Breaking Load)	-	500	-
Cl-6(Marking)	-	500	-
5.1.1(Staple Length)	-	500	-
5.1.2(Trash Content)	-	500	-
5.1.3(Moisture Content)	-	500	-
5.1.4(Strength of Fibre)	-	500	-
5.1.5(Micronaire Value)	-	500	-

08 May, 2028

-
Included w.e.f. 21.08.2025

4867

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 1660 (2024)

Wrought and Cast Aluminium Utensils Specification ( Second Revision )

28000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3.1.1, 3.1.2(Minimum Thickness of Sheet)	-	500	-
Cl-3.1.3, Table-2(Minimum Thickness at the Bottom)	-	0	-
Cl-3.1.3, Table-2(Minimium Thickness of Wall at the Top Edge)	-	0	-
Cl-3.1.3, Table-2(Minimum Cover Thickness)	-	0	-
Cl-5(Fabrication)	-	1500	-
Cl-6(Shape and Dimensions)	-	2000	-
Cl-7.1(Handles, when fitted)	-	0	-
Cl-7.2(Handles)	-	0	-
Cl-7.3 (Cl- 4.1 of IS 13395)(Construction)	-	3000	-
Cl-7.3 (Cl- 4.2 of IS 13395)(Materials)	-	2500	-
Cl-7.3 (Cl- 4.3 of IS 13395)(Selection and Size)	-	2500	-
Cl-7.3 (Cl- 4.4 of IS 13395)(Position of Handle and Knob with Respect to Cookware)	-	0	-
Cl-7.3 (Cl- 4.5 of IS 13395)(Attachment to Cookware)	-	0	-
Cl-7.3 (Cl- 5.2 of IS 13395)(Bending Strength)	-	0	-
Cl-7.3 (Cl- 5.3 of IS 13395)(Torque Strength)	-	0	-
Cl-7.3 (Cl- 5.4 of IS 13395)(Impact Strength)	-	1500	-
Cl-7.3 (Cl- 5.5 of IS 13395)(Fatigue Resistance)	-	0	-
Cl-7.3 (Cl- 5.6 of IS 13395)(Leakage)	-	0	-
Cl-7.3 (Cl- 5.7 of IS 13395)(Thermal Insulation)	-	0	-
Wrought and Cast Aluminium Utensils — Specification(Heat Resistance)	-	0	-
Cl-7.3 (Cl- 5.9 of IS 13395)(Washing Resistance (Type Test))	-	0	-
Cl-7.3 (Cl- 5.10 of IS 13395)(Burning Resistance)	-	0	-
Cl-8(Workmanship and Finish)	-	1000	-
Cl-8.3(Utensils, if anodized, fully or partially)	-	1000	-
Cl-8.3(Minimum nominal thickness)	-	0	-
Cl-8.3(Thickness of hard anodized)	-	0	-
Cl-8.3(Finish and appearance of hard anodized)	-	0	-
Cl-8.3(Abrasion resistance of hard anodized)	-	1500	-
Cl-8.3(Colour of hard anodized)	-	500	-
Cl-8.3(Hardness of hard anodized)	-	1000	-
Cl-8.7(The thickness test, adhesion test)	-	0	-
Cl-8.7(Minimum thickness of coating)	-	2000	-
Cl-8.10.1(Tests for Lunch Boxes- Performance Test)	-	1000	-
Cl-8.10.1(Tests for Lunch Boxes- Performance Test)	-	0	-
Cl-8.10.2(Tests for Lunch Boxes- Ground Nut Oil Test for Leakage)	-	1000	-
Cl-9.1(Normal Capacity)	-	0	-
Cl-9.2(Normal Capacity of internal diameter)	-	0	-
Cl-4.1(Main body of utensil)	-	0	-
Cl-8.6(Ceramic coating)	-	0	-
Cl-4.2(Material of strips)	-	0	-
Cl-4.3(Clips of lunch box)	-	0	-
Cl-4.3(Clips of lunch box)	-	0	-
Cl-4.3(Rivets used in lunch box)	-	0	-
Cl-4.4(Screws, studs/nuts, and locking loop)	-	0	-
Cl-4.5(Rivets for fixing of handles)	-	0	-
Cl-4.5(Material of cap)	-	0	-
Cl-8.11.1(Test(s) on Tempered Glass Lid- Fragmentation Test)	-	0	-
Cl-8.11.2(Test(s) on Tempered Glass Lid-Ball Drop Test)	-	0	-
Cl-8.11.3(Test(s) on Tempered Glass Lid- Thermal Shock Test)	-	0	-
Cl-8.11.4(Test(s) on Tempered Glass Lid- Free Fall Test)	-	0	-
Cl-8.8(Requirements of PTFE)	-	0	-
Cl-8.5(Non-stick unreinforced PTFE)	-	1500	-
Cl-4.1(Cast cookware)	-	0	-
Cl-4.1.1(Lids (material))	-	0	-
Cl-4.1.1(Minimum thickness of lid)	-	0	-
Cl-4.1.2(Minimum thickness of glass)	-	0	-
Cl-4.1.2(Material of rim)	-	0	-
Cl-4.1.2(Minimum thickness of rim)	-	0	-
Cl-4.2(Stainless steel handles, rivets and fittings)	-	0	-
Cl-4.6(Strips used for flame guards)	-	0	-
Cl-4.6(stainless steel)	-	0	-
Cl-8.7.1(Dry heat the cookware)	-	0	-
Cl-4.1(Other aluminum components and parts)	-	0	-
Wrought and Cast Aluminium Utensils — Specification(Lid of the cookware)	-	0	-
Cl-8.9(Material for induction plate)	-	0	-
Cl-8.9(Test for Induction compatible base)	-	0	-

-
Included w.e.f 28.08.2025

4868

EKO PRO ENGINEERS PRIVATE LIMITED (32/41), GHAZIABAD

9179706

IS 16994 (2018)

Footwear for Men and Women for Municipal Scavenging Work

ALL

24500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.6(Leak Proof test)	-	1000	-
8.4(Volatility & lead content )	-	1000	-
8.3(Compression Resistance)	-	500	-
8.3(Impact resistance )	-	500	-
8.2(Internal Toe cap length)	-	500	-
8.1(Height of upper )	-	300	-
8.0(Construction)	-	300	-
7.10(Ageing test)	-	400	-
7.9(Hydrolysis)	-	500	-
7.8(Insocks Material )	-	500	-
7.7.5(Upper / Outsole bond strength)	-	400	-
7.7.4(Interlayer Bond Strength )	-	500	-
7.7.3(Flexing Resistance )	-	1000	-
7.7.2(Abrasion Resistance)	-	1000	-
7.7.1(Tear Strength )	-	1000	-
7.7(Hardness (IRHD))	-	500	-
7.7(Thickness)	-	300	-
7.7(Density )	-	1000	-
7.6(Peel Strength )	-	1000	-
7.6(Shape retention)	-	1000	-
7.6(Moisture )	-	1000	-
7.6(Resilience test )	-	1000	-
7.6(1st Dry collapsing load, hardness)	-	1000	-
7.5(Insocks )	-	500	-
7.5(Insoles )	-	500	-
7.5(Water abrasion & desorption)	-	1000	-
7.5(Thickness )	-	500	-
7.4(Tensile Strength )	-	1000	-
7.4(Abrasion Resistance)	-	1000	-
7.4(Tear Strength )	-	1000	-
7.3(Flexing Resistance )	-	1000	-
7.3(Tensile Strength )	-	1000	-
7.3(Thickness )	-	300	-
7.3(Water Vapour permeability & coefficient )	-	1000	-
7.3(Tear Strength )	-	1000	-
7.1(Compression Tester)	-	1000	-
7.1(Impact resistance)	-	1000	-
Cl-7.4(water vapour permeability of lining)	-	1000	-
Cl-7.4(Water vapour coefficient of lining)	-	1000	-
Cl-7.3(Hydrolysis of upper)	-	1000	-
8.6(Leak Proof test)	-	1000	-
8.4(Volatility & lead content )	-	1000	-
8.3(Compression Resistance)	-	1000	-
8.3(Impact resistance )	-	1000	-
8.2(Internal Toe cap length)	-	500	-
8.1(Height of upper )	-	300	-
8.0(Construction)	-	400	-
7.10(Ageing test)	-	500	-
7.9(Hydrolysis)	-	500	-
7.8(Insocks Material )	-	500	-
7.7.5(Upper / Outsole bond strength)	-	500	-
7.7.4(Interlayer Bond Strength )	-	500	-
7.7.3(Flexing Resistance )	-	1000	-
7.7.2(Abrasion Resistance)	-	1000	-
7.7.1(Tear Strength )	-	1000	-
7.7(Hardness (IRHD))	-	500	-
7.7(Thickness)	-	300	-
7.7(Density )	-	500	-
7.6(Peel Strength )	-	1000	-
7.6(Shape retention)	-	500	-
7.6(Moisture )	-	500	-
7.6(Resilience test )	-	1000	-
7.6(1st Dry collapsing load, hardness)	-	500	-
7.5(Insocks )	-	500	-
7.5(Insoles )	-	500	-
7.5(Water abrasion & desorption)	-	500	-
7.5(Thickness )	-	300	-
7.4(Tensile Strength )	-	1000	-
7.4(Abrasion Resistance)	-	1000	-
7.4(Tear Strength )	-	1000	-
7.3(Flexing Resistance )	-	1000	-
7.3(Tensile Strength )	-	1000	-
7.3(Thickness )	-	300	-
7.3(Water Vapour permeability & coefficient )	-	400	-
7.3(Tear Strength )	-	1000	-
7.1(Compression Tester)	-	1000	-
7.1(Impact resistance)	-	500	-
Cl-7.4(water vapour permeability of lining)	-	500	-
Cl-7.4(Water vapour coefficient of lining)	-	500	-
Cl-7.3(Hydrolysis of upper)	-	1000	-

-
Included w.e.f.18.08.2025

4869

Stellar Test House, Noida

8171606

IS 3536 (2016)

Ready mixed paint, brushing, wood primer - Specification (Second Revision)

All Types and Grade

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Lead Restriction)	-	1000	-
4.3, Table 1, (v)(Colour)	-	1000	-
4.3, Table 1, (vii)(Flash point)	-	500	-
4.3, Table 1, (viii),(a)(Volume solids, percent, Min)	-	500	-
4.3, Table 1, (ix)(Water content percent by mass, Max (if suspected to be present))	-	1000	-
4.3, Table 1, (x)(Resistance to water)	-	500	-
Clause-4.2(Lead Restriction)	-	1000	-
Clause-4.3 and 1.1 Table-1 S.No. 1 (v)(Colour)	-	1000	-
Clause-4.3 and 1.1 Table-1 S.No. 1 (vii)(Flash point)	-	500	-
Clause-4.3 and 1.1 Table-1 S.No. 1 (x)(Water content1) percent by mass,)	-	1000	-
Clause-4.3 and 1.1 Table-1 S.No. 1 (xi)(Resistance to water)	-	500	-
Clause-4.3 and 1.1 Table-1 S.No. 1 (ix)(Volume solids, percent, Min)	-	500	-
4.3 Table 1(i)(Drying time, h, Max)	-	500	-
4.3, Table 1,(i) (a)(Surface dry)	-	500	-
4.3, Table 1,(i) (b)(Hard dry)	-	500	-
4.3, Table 1, (ii)(Consistency)	-	500	-
4.3, Table 1, (iii)(Mass, in kg/10 litres, Min)	-	500	-
4.3, Table 1, (iv)(Finish)	-	300	-
4.3, Table 1, (vi), (a)(Bend test with Type 1 apparatus and 6.25 dia mandrel)	-	500	-
4.3, Table 1, (vi),(b)(Scratch hardness at a load of (500 g))	-	1000	-
4.3, Table 1, (xi)(Keeping properties)	-	500	-
5.1(Packing)	-	200	-
5.2(Marking)	-	200	-
Clause-4.3 and 1.1 Table-1 S.No. 1 (i)(Drying time,)	-	500	-
Clause-4.3 and 1.1 Table-1 S.No. 1 (ii)(Consistency)	-	500	-
Clause-4.3 and 1.1 Table-1 S.No. 1 (iii)(Mass, in kg/10 litres, Min)	-	500	-
Clause-4.3 and 1.1 Table-1 S.No. 1 (iv)(Finish)	-	300	-
Clause-4.3 and 1.1 Table-1 S.No. 1 (vi), (a)(Bend test with Type 1 apparatus and 6.25 dia mandrel)	-	500	-
Clause-4.3 and 1.1 Table-1 S.No. 1 (vi), (b)(Scratch hardness at a load of (500 g))	-	1000	-
Clause-4.3 and 1.1 Table-1 S.No. 1 (xii)(Keeping properties)	-	500	-
Clause-5(Packing and Marking )	-	200	-

26 Sep, 2028

-
Included w.e.f. 14.08.2025

4870

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 4923 (2017)

Hollow steel sections for structural use - Specification (Third Revision)

Hollow steel sections for structural use

12200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Depth))	-	500	5% discount for BIS
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Width))	-	500	5% discount for BIS
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Thickness))	-	500	5% discount for BIS
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Weigth))	-	500	5% discount for BIS
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Area of Section))	-	500	5% discount for BIS
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia))	-	500	5% discount for BIS
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about X-X))	-	500	5% discount for BIS
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about Y-Y))	-	500	5% discount for BIS
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration))	-	500	5% discount for BIS
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration about X-X))	-	500	5% discount for BIS
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Radius of Gyration about Y-Y))	-	500	5% discount for BIS
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Elastic Modulus))	-	500	5% discount for BIS
Cl. 14.1(Weight on lots of 10 tonnes min)	-	0	Nil
Cl. 10.2, Fig 1(Outside dimension (B))	-	500	5% discount for BIS
11(Oiling & Painting - IS 4923)	-	500	5% discount for BIS
13(Marking)	-	200	5% discount for BIS
Cl. 15.2, Table 3(Elongation- IS 1608)	-	500	5% discount for BIS
Cl. 15.2, Table 3(Yield Strength- IS 1608)	-	500	5% discount for BIS
Cl. 15.2, Table 3(Tensile Strength- IS 1608)	-	500	5% discount for BIS
Cl. 10.7, Fig 5(Total twist, V)	-	500	5% discount for BIS
Cl.7.1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	5% discount for BIS
Cl.7.1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	5% discount for BIS
Cl.7.1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	5% discount for BIS
Cl.7.1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	5% discount for BIS
Cl.7.1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	5% discount for BIS
Cl.7.1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	5% discount for BIS
Cl.7.1(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	5% discount for BIS
Cl.7.1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	5% discount for BIS
Cl.7.1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	5% discount for BIS
Cl.7.1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	5% discount for BIS
Cl.7.1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	5% discount for BIS
Cl.7.1(Carbon Equivalent-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about X-X))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about Y-Y))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus about X-X))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Plastic Modulus about Y-Y))	-	500	-
Cl. 10.1, 14.1, 18.1(Straightness)	-	500	-
Cl. 10.2, Fig 1(Outside dimension (H))	-	500	-
Cl. 10.2, Fig 1(Outside dimension (T))	-	500	-
Cl. 10.4, Fig 2(Concavity, X1)	-	500	-
Cl. 10.4, Fig 2(Convexity, X2)	-	500	-
Cl. 10.5, Fig 3(Squareness of side)	-	500	-
Cl. 14.1(Exact Length)	-	500	-
Cl. 14.1(Random Length)	-	500	-
Cl. 14.1(Weight on individual length)	-	500	-
Cl. 18, Note 2(Internal Fin Height (Only for Cold Formed))	-	500	-
7(Micro Alloying elements(Nb+V+Ti))	-	500	-
7(Carbon equivalent as CE)	-	500	-
10.4(Concavity/Convexity-SOP MT-23)	-	500	-
10.5(Squareness of corner/Sides-SOP MT-23)	-	500	-
10.6("External corner Radius/ Radii of corners-outside - SOP MT-23")	-	500	-
18.1(Height of the internal weld fin - IS 4923)	-	500	-
10.3(Thickness - IS 4923)	-	500	-
Cl-19(Mechanical Tests)	-	500	-
Cl. 10.6, Fig 4(External Corner Radius)	-	500	-

-
-

4871

CIPET, Lucknow

9102534

IS 13664 (1993)

Poly - Pallets for bag storage godowns - Specification

15525 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.5(End Plugs)	-	500	-
5.1 (Table-1)(Nominal Assembly Dimensions)	-	500	-
5.3(Dimensions and Cross Sectional Details of Members)	-	500	-
7(Material Identification)	-	2000	-
8.1(Type)	-	500	-
8.2(Stability)	-	500	-
8.3(Assembly)	-	500	-
8.4(Fastening)	-	500	-
8.6(Weight)	-	500	-
9.1.1 Table-2(Axial Crushing load)	-	1100	-
9.1.1 Table-2(Cross Sectional crushing load)	-	1100	-
9.1.1 Table-2(Ultimate bending load)	-	1100	-
9.1.2 Table-3(Shear Strength)	-	1100	-
9.1.2 Table-3(Ultimate tensile strength & Elongation)	-	1100	-
9.1.2 Table-3(Impact Strength)	-	1100	-
9.1.2 Table-3(Thermal Stability)	-	1300	-
9.1.2 Table-3(Water absorpation)	-	1100	-
9.1.2 Table-3(Chemical Resistance)	-	1600	-
9.1.2 Table-3(Bent Strength at yield)	-	1100	-
9.1.2 Table-3(Compressive strength at 10% deformation)	-	1100	-
9.1.3.1(Stacking Test)	-	1100	-
9.1.3.1(Bending Test)	-	1100	-
9.1.3.1(Corner Drop Test)	-	1100	-

31 Dec, 2026

-
-

4872

Quality Testing & Research Lab, Gautam Buddha Nagar

8184006

IS 15298 : Part 2 (2024)

Personal Protective Equipment Part 2 Safety Footwear (ISO 20345 : 2021, MOD) (Third Revision)

Type 1 / Type 2

52560 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.2(Design)	-	600	Gst Extra
Cl 5.2.2, Table 4(" Height of upper ")	-	600	-
Cl 5.2.3(Heel area)	-	800	-
Cl 5.3.1.1(Construction of whole footwear)	-	1500	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	1500	-
Cl 5.3.2.1(Toe protection - general)	-	1800	-
Cl 5.3.2.2(Internal length)	-	800	-
Cl 5.3.2.3(Width of toecap flange)	-	1200	-
Cl 5.3.2.4.1(Corrosion resistance of Class I footwear and hybrid mounted footwear)	-	1200	-
Cl 5.3.2.4.2(Corrosion resistance of Class II and hybrid moulded footwear)	-	1200	-
Cl 5.3.2.5(Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-	1000	-
Cl 5.3.2.6(Impact resistance)	-	1500	-
Cl 5.3.2.7(Compression resistance)	-	1200	-
Cl 5.3.3(Leak proofness)	-	1000	-
Cl 5.3.4("Specific ergonomic features ")	-	1000	-
Cl 5.3.5.2, Table 7(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	2500	-
Cl 5.3.6, Table no 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	1000	-
Cl 5.3.6, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (x)(pH)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	1000	-
Cl 5.3.7(Seam strength)	-	1200	-
Cl 5.3.8(Lead Content ( National Annex A))	-	1800	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	1200	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	1500	-
Cl 5.4.2(Thickness)	-	800	-
Cl 5.4.3(Tear strength)	-	1500	-
Cl 5.4.4, Table 11(Tensile properties- Tensile strength)	-	1500	-
Cl 5.4.4, Table 11(Tensile properties- Breaking Force)	-	1500	-
Cl 5.4.4, Table 11(Tensile properties-Modulus at 100 % elongation)	-	1500	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	1500	-
Cl 5.4.5(Flexing resistance)	-	1200	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	1800	-
Cl 5.4.7(Resistance to hydrolysis)	-	2500	-
Cl 5.5.2(Lining- Tear strength)	-	1000	-
Cl 5.5.3(Lining- Abrasion resistance)	-	800	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	1200	-
Cl 5.6.2, Table 14(Tear strength of tongue)	-	1000	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	1000	-
Cl 5.7.2(Water permeability of insock)	-	1400	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	1500	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	600	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	1200	-
Cl 5.8.2.1, Table 15(Thickness of Outsole)	-	800	-
Cl 5.8.2.2(Cleated area)	-	1000	-
Cl 5.8.2.3(Cleat height)	-	800	-
Cl 5.8.3(Outsole- Tear strength)	-	1000	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	1000	-
Cl 5.8.5(Outsole-Flexing resistance)	-	1200	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	2500	-
Cl 5.8.7(Interlayer bond strength)	-	1000	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	1200	-
Personal protective equipment: Part 2 safety footwear(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	1500	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	1200	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	1000	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	1800	-
Cl 6.2.1.4.2.1(Corrosion resistance of perforation resistant metallic insert for Class I footwear and hybrid mounted footwear)	-	1200	-
Cl 6.2.1.4.2.2(Corrosion resistance of perforation resistant metallic insert for Class II footwear and hybrid moulded footwear)	-	1200	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	1200	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	1500	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	1500	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	1800	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	1200	-
Cl 6.2.4(Energy absorption of seat region)	-	1500	-
Cl 6.2.5(Water resistance)	-	1000	-
Cl 6.2.6.1(Metatarsal protection - Construction)	-	1000	-
Cl 6.2.6.2("Metatarsal protection-Impact resistance of metatarsal protective device ")	-	1200	-
Cl 6.2.7(Ankle protection)	-	1000	-
Cl 6.2.8.2(Cut resistance footwear- design)	-	1000	-
Cl 6.2.8.2(Dimensions and construction of protective area of Cut resistance footwear)	-	800	-
Cl 6.2.8.3(Resistance to cutting)	-	1200	-
Cl 6.2.9(Scuff cap)	-	1800	-
Cl 6.2.10 , Table 19("Slip resistance on ceramic tile floor with glycerine ")	-	2500	-
Cl 6.3(Upper — Water penetration and absorption)	-	1200	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	1200	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	1500	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	1200	-
Cl 6.4.3.2(Design of Ladder grip)	-	1200	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	1500	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	800	-
Cl 7, Table 20("Marking ")	-	800	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	1200	-
Cl 5.2(Design)	-	800	-
Cl 5.2.2, Table 4(" Height of upper ")	-	1200	-
Cl 5.2.3(Heel area)	-	1500	-
Cl 5.3.1.1(Construction of whole footwear)	-	1800	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	1500	-
Cl 5.3.2.1(Toe protection - general)	-	1200	-
Cl 5.3.2.2(Internal length)	-	1500	-
Cl 5.3.2.3(Width of toecap flange)	-	1600	-
Cl 5.3.2.4.1(Corrosion resistance of Class I footwear and hybrid mounted footwear)	-	1200	-
Cl 5.3.2.4.2(Corrosion resistance of Class II and hybrid moulded footwear)	-	1500	-
Cl 5.3.2.5(Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-	1500	-
Cl 5.3.2.6(Impact resistance)	-	1200	-
Cl 5.3.2.7(Compression resistance)	-	1200	-
Cl 5.3.3(Leak proofness)	-	1600	-
Cl 5.3.4("Specific ergonomic features ")	-	1200	-
Cl 5.3.5.2, Table 7(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	1500	-
Cl 5.3.6, Table no 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	1000	-
Cl 5.3.6, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	1200	-
Cl 5.3.6, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	1200	-
Cl 5.3.6, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	1600	-
Cl 5.3.6, Table no 1 of IS 17011 (x)(pH)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	1200	-
Cl 5.3.6, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	1000	-
Cl 5.3.7(Seam strength)	-	1200	-
Cl 5.3.8(Lead Content ( National Annex A))	-	1200	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	1500	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	1300	-
Cl 5.4.2(Thickness)	-	1000	-
Cl 5.4.3(Tear strength)	-	1000	-
Cl 5.4.4, Table 11(Tensile properties- Tensile strength)	-	1000	-
Cl 5.4.4, Table 11(Tensile properties- Breaking Force)	-	2500	-
Cl 5.4.4, Table 11(Tensile properties-Modulus at 100 % elongation)	-	2500	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	2500	-
Cl 5.4.5(Flexing resistance)	-	1000	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	1000	-
Cl 5.4.7(Resistance to hydrolysis)	-	2500	-
Cl 5.5.2(Lining- Tear strength)	-	1200	-
Cl 5.5.3(Lining- Abrasion resistance)	-	1000	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	1000	-
Cl 5.6.2, Table 14(Tear strength of tongue)	-	1000	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	1000	-
Cl 5.7.2(Water permeability of insock)	-	1200	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	1500	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	1200	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	1200	-
Cl 5.8.2.1, Table 15(Thickness of Outsole)	-	1000	-
Cl 5.8.2.2(Cleated area)	-	800	-
Cl 5.8.2.3(Cleat height)	-	1600	-
Cl 5.8.3(Outsole- Tear strength)	-	1000	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	1200	-
Cl 5.8.5(Outsole-Flexing resistance)	-	1200	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	1200	-
Cl 5.8.7(Interlayer bond strength)	-	1500	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	1000	-
Personal protective equipment: Part 2 safety footwear(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	1200	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	1000	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	1200	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	1500	-
Cl 6.2.1.4.2.1(Corrosion resistance of perforation resistant metallic insert for Class I footwear and hybrid mounted footwear)	-	1200	-
Cl 6.2.1.4.2.2(Corrosion resistance of perforation resistant metallic insert for Class II footwear and hybrid moulded footwear)	-	1200	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	1400	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	1500	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	1500	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	1000	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	1200	-
Cl 6.2.4(Energy absorption of seat region)	-	1500	-
Cl 6.2.5(Water resistance)	-	1200	-
Cl 6.2.6.1(Metatarsal protection - Construction)	-	1000	-
Cl 6.2.6.2("Metatarsal protection-Impact resistance of metatarsal protective device ")	-	1500	-
Cl 6.2.7(Ankle protection)	-	1500	-
Cl 6.2.8.2(Cut resistance footwear- design)	-	1200	-
Cl 6.2.8.2(Dimensions and construction of protective area of Cut resistance footwear)	-	1000	-
Cl 6.2.8.3(Resistance to cutting)	-	1000	-
Cl 6.2.9(Scuff cap)	-	1200	-
Cl 6.2.10 , Table 19("Slip resistance on ceramic tile floor with glycerine ")	-	1500	-
Cl 6.3(Upper — Water penetration and absorption)	-	1500	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	1200	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	1000	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	1500	-
Cl 6.4.3.2(Design of Ladder grip)	-	1200	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	1200	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	1000	-
Cl 7, Table 20("Marking ")	-	1000	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	1200	-

23 Feb, 2028

-
Included w.e.f 03.11.2025

4873

Stellar Test House, Noida

8171606

IS 11883 (2017)

Ready mixed paint, brushing, red oxide, priming for metals specification (First Revision)

All grade and types

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause-4.2.1(Lead Restriction)	-	500	-
Clause-4.3 Table-1 S.No-1 (vi)(Colour)	-	500	-
Clause-4.3 Table-1 S.No-1 (vii)(Water content, percent by mass)	-	1000	-
Clause-4.3 Table-1 S.No-1 (ix), b)(Resistance to salt spray)	-	2000	-
Clause-4.3 Table-1 S.No-1 (x)(Flash point )	-	1000	-
Clause-4.1 (Composition-)	-	500	-
Clause-4.3 Table-1 S.No-1 (i)(Drying Time, h, Max)	-	1000	-
Clause-4.3 Table-1 S.No-1 (ii)(Consistency)	-	500	-
Clause-4.3 Table-1 S.No-1 (iii)(Finish)	-	500	-
Clause-4.3 Table-1 S.No-1 (iv)(Mass, kg/101, Min)	-	500	-
Clause-4.3 Table-1 S.No-1 (v)(Wet opacity )	-	500	-
Clause-4.3 Table-1 S.No-1 (viii), a)(Bend test (with 6.25 mm dia mandrel and type 1 apparatus))	-	500	-
Clause-4.3 Table-1 S.No-1 (viii), b)(Scratch hardness (load 1000 g))	-	1000	-
Clause-4.3 Table-1 S.No-1 (ix), a)(Resistance to humidity (expose for 4 days))	-	1000	-
Clause-4.3 Table-1 S.No-1 (xi)(Keeping properties)	-	500	-
Clause-5(Packing and Marking )	-	200	-
Clause-4.2.1(Lead Restriction)	-	0	-
Clause-4.3 Table-1 S.No-1 (vi)(Colour)	-	0	-
Clause-4.3 Table-1 S.No-1 (vii)(Water content, percent by mass)	-	0	-
Clause-4.3 Table-1 S.No-1 (ix), b)(Resistance to salt spray)	-	0	-
Clause-4.3 Table-1 S.No-1 (x)(Flash point )	-	0	-
Clause-4.1 (Composition-)	-	0	-
Clause-4.3 Table-1 S.No-1 (i)(Drying Time, h, Max)	-	0	-
Clause-4.3 Table-1 S.No-1 (ii)(Consistency)	-	0	-
Clause-4.3 Table-1 S.No-1 (iii)(Finish)	-	0	-
Clause-4.3 Table-1 S.No-1 (iv)(Mass, kg/101, Min)	-	0	-
Clause-4.3 Table-1 S.No-1 (v)(Wet opacity )	-	0	-
Clause-4.3 Table-1 S.No-1 (viii), a)(Bend test (with 6.25 mm dia mandrel and type 1 apparatus))	-	0	-
Clause-4.3 Table-1 S.No-1 (viii), b)(Scratch hardness (load 1000 g))	-	0	-
Clause-4.3 Table-1 S.No-1 (ix), a)(Resistance to humidity (expose for 4 days))	-	0	-
Clause-4.3 Table-1 S.No-1 (xi)(Keeping properties)	-	0	-
Clause-5(Packing and Marking )	-	0	-
Clause-4.2.1(Lead Restriction)	-	0	-
Clause-4.3 Table-1 S.No-1 (vi)(Colour)	-	0	-
Clause-4.3 Table-1 S.No-1 (vii)(Water content, percent by mass)	-	0	-
Clause-4.3 Table-1 S.No-1 (ix), b)(Resistance to salt spray)	-	0	-
Clause-4.3 Table-1 S.No-1 (x)(Flash point )	-	0	-
Clause-4.1 (Composition-)	-	0	-
Clause-4.3 Table-1 S.No-1 (i)(Drying Time, h, Max)	-	0	-
Clause-4.3 Table-1 S.No-1 (ii)(Consistency)	-	0	-
Clause-4.3 Table-1 S.No-1 (iii)(Finish)	-	0	-
Clause-4.3 Table-1 S.No-1 (iv)(Mass, kg/101, Min)	-	0	-
Clause-4.3 Table-1 S.No-1 (v)(Wet opacity )	-	0	-
Clause-4.3 Table-1 S.No-1 (viii), a)(Bend test (with 6.25 mm dia mandrel and type 1 apparatus))	-	0	-
Clause-4.3 Table-1 S.No-1 (viii), b)(Scratch hardness (load 1000 g))	-	0	-
Clause-4.3 Table-1 S.No-1 (ix), a)(Resistance to humidity (expose for 4 days))	-	0	-
Clause-4.3 Table-1 S.No-1 (xi)(Keeping properties)	-	0	-
Clause-5(Packing and Marking )	-	0	-
Clause-4.2.1(Lead Restriction)	-	0	-
Clause-4.3 Table-1 S.No-1 (vi)(Colour)	-	0	-
Clause-4.3 Table-1 S.No-1 (vii)(Water content, percent by mass)	-	0	-
Clause-4.3 Table-1 S.No-1 (ix), b)(Resistance to salt spray)	-	0	-
Clause-4.3 Table-1 S.No-1 (x)(Flash point )	-	0	-
Clause-4.1 (Composition-)	-	0	-
Clause-4.3 Table-1 S.No-1 (i)(Drying Time, h, Max)	-	0	-
Clause-4.3 Table-1 S.No-1 (ii)(Consistency)	-	0	-
Clause-4.3 Table-1 S.No-1 (iii)(Finish)	-	0	-
Clause-4.3 Table-1 S.No-1 (iv)(Mass, kg/101, Min)	-	0	-
Clause-4.3 Table-1 S.No-1 (v)(Wet opacity )	-	0	-
Clause-4.3 Table-1 S.No-1 (viii), a)(Bend test (with 6.25 mm dia mandrel and type 1 apparatus))	-	0	-
Clause-4.3 Table-1 S.No-1 (viii), b)(Scratch hardness (load 1000 g))	-	0	-
Clause-4.3 Table-1 S.No-1 (ix), a)(Resistance to humidity (expose for 4 days))	-	0	-
Clause-4.3 Table-1 S.No-1 (xi)(Keeping properties)	-	0	-
Clause-5(Packing and Marking )	-	0	-

26 Sep, 2028

-
included w.e.f 21.11.2025

4874

Rajkot Metlab Services LLP, Rajkot

7183706

IS 208 (2020)

Door Handles - Specification ( Sixth Revision )

7900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10(PACKING)	-	500	-
9.1(BIS Certification Marking)	-	500	-
9(MARKING)	-	500	-
6.2(Tolerance)	-	500	-
6.1 Table2A & 2B and Fig 1,2,3,4(DIMENSIONS - Size 1. No. in each Lug 2. No. in a plate when a continious plate is used 3. Size Designation of Counter-sunk Head Wood Screws (as per IS 6760: 1972))	-	1000	-
6.1 Table2A & 2B and Fig 1,2,3,4(DIMENSIONS - Size (A,B,C,D,E,F,G,H,I))	-	1000	-
5.1(MANUFACTURE- General)	-	1000	-
3(TYPES-Doors handle shall be of the following types according to the materials used:)	-	1000	-
4.2 -Table 1- viii (Ref. Cl 4.1, Table 1 of IS 742 : 1981)(Chemical composition - Zinc- IS 2600:1964)	-	1000	-
4.2 -Table 1- viii (Ref. Cl 4.1, Table 1 of IS 742 : 1981)(Chemical composition - Impurities-Nickel- IS 2600:1964)	-	1000	-
4.2 -Table 1- viii (Ref. Cl 4.1, Table 1 of IS 742 : 1981)(Chemical composition - Impurities-Thallium and Indium- IS 2600:1964)	-	1000	-
4.2 -Table 1- viii (Ref. Cl 4.1, Table 1 of IS 742 : 1981)(Chemical composition - Impurities-Tin- IS 2600:1964)	-	1000	-
4.2 -Table 1- viii (Ref. Cl 4.1, Table 1 of IS 742 : 1981)(Chemical composition - Impurities-Cadmium- IS 2600:1964)	-	1000	-
Cl.5.1(General)	-	1000	-
Cl.6(Dimension)	-	1000	-
Cl.7(Finish)	-	2000	-
Cl.8.2(Cossosion Test)	-	2000	-
Cl.8.3(Quench Test)	-	2000	-
Cl.9(Sampling and criterion for conformity)	-	100	-
Cl.10(Marking)	-	100	-
Cl.11(Packing)	-	100	-
Cl.8.3 (Amendment 1)(Anodizing Test)	-	1000	-

12 Jan, 2028

-
Included w.e.f.05.08.2025

4875

BIS, Central Laboratory (CL)

None

IS 2041 (2024)

Steel Plates and Strips for Pressure Vessels Used at Moderate and Low Temperature â Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-7.1, Table-1 (C)	-
Cl-7.1, Table-1 (Si)	-
Cl-7.1, Table-1 (Mn Max)	-
Cl-7.1, Table-1 (P max)	-
Cl-7.1, Table-1 (S Max)	-
Cl-7.1, Table-1 (Al Max)	-
Cl-7.1, Table-1 (N Max)	-
Cl-7.1, Table-1 (Nb Max)	-
Cl-7.1, Table-1 (V Max)	-
Cl-7.1, Table-1 (Ti Max)	-
Cl-7.1, Table-1 (Nb + V + Ti Max)	-
Cl-7.1, Table-1 (Cr Max)	-
Cl-7.1, Table-1 (Cu Max)	-
Cl-7.1, Table-1 (Mo Max)	-
Cl-7.2, Table-2 (Nickel)	-

-
-

4876

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 17526 (2021)

STAINLESS STEEL VACUUM FLASKS - SPECIFICATION

ALL

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Manufacture and Workmanship)	-	1000	-
5.3(Manufacture and Workmanship)	-	1000	-
7.1.1(Material- Inner containers)	-	1000	-
7.1.2(Outer protective case and accessories - Thickness)	-	1000	-
7.1.2.1(Coating - Limit of lead)	-	1000	-
7.1.2.1(Coating - Limit of Cadmium)	-	1000	-
7.1.4(Auxillary closure "Bisphenol A (BPA)")	-	1000	-
7.3(Capacity)	-	1000	-
7.4(Heat Retention Capability)	-	1000	-
7.5(Cold Retention Capability)	-	1000	-
7.6.1(Drop Impact Test)	-	1000	-
7.6.2(Pendulum Impact Test)	-	1000	-
7.7(Fixing Strength of the Handle)	-	1000	-
7.8(Test for Strength of Shoulder Strap)	-	1000	-
7.8.1(Test for strength of cord)	-	1000	-
7.9(Leakage Test)	-	1000	-
7.10(Joint Leak Test)	-	1000	-
7.11(Staining Test)	-	1000	-
7.12(Length of the Shoulder Strap)	-	1000	-
7.13(Stability of Flask/Bottle)	-	1000	-
7.14(Pour Test)	-	1000	-
9.1(Marking)	-	1000	-
9.2(BIS certification marking)	-	1000	-
10(Packaging)	-	1000	-
7.1.2(Outer protective case and accessories - Material)	-	1000	-
7.1.2.1(Coating- Thickness test)	-	1000	-
7.1.2.1(Coating- Adhesion test)	-	1000	-
7.1.2.1(Coating- Salt Water corrosion test)	-	1000	-
7.2(Arrangement for holding and suspension)	-	1000	-
7.15 (Amendment 1)(Endurance test for O-Ring, Washer and Stopper)	-	1000	-
7.1.3(Overall migration)	-	0	-
7.1.3 (Amendment 1)(O-Ring and washer- Hardness)	-	0	-
7.1.3 (Amendment 1)(O-Ring and washer-- BPA)	-	0	-
7.1.3(Stopper Material)	-	0	-
5(Manufacture and Workmanship)	-	1000	-
5.3(Manufacture and Workmanship)	-	1000	-
7.1.1(Material- Inner containers)	-	1000	-
7.1.2(Outer protective case and accessories - Thickness)	-	1000	-
7.1.2.1(Coating - Limit of lead)	-	1000	-
7.1.2.1(Coating - Limit of Cadmium)	-	1000	-
7.1.4(Auxillary closure "Bisphenol A (BPA)")	-	1000	-
7.3(Capacity)	-	1000	-
7.4(Heat Retention Capability)	-	1000	-
7.5(Cold Retention Capability)	-	1000	-
7.6.1(Drop Impact Test)	-	1000	-
7.6.2(Pendulum Impact Test)	-	1000	-
7.7(Fixing Strength of the Handle)	-	1000	-
7.8(Test for Strength of Shoulder Strap)	-	1000	-
7.8.1(Test for strength of cord)	-	1000	-
7.9(Leakage Test)	-	1000	-
7.10(Joint Leak Test)	-	1000	-
7.11(Staining Test)	-	1000	-
7.12(Length of the Shoulder Strap)	-	1000	-
7.13(Stability of Flask/Bottle)	-	1000	-
7.14(Pour Test)	-	1000	-
9.1(Marking)	-	0	-
9.2(BIS certification marking)	-	1000	-
10(Packaging)	-	0	-
7.1.2(Outer protective case and accessories - Material)	-	1000	-
7.1.2.1(Coating- Thickness test)	-	1000	-
7.1.2.1(Coating- Adhesion test)	-	1000	-
7.1.2.1(Coating- Salt Water corrosion test)	-	1000	-
7.2(Arrangement for holding and suspension)	-	1000	-
7.15 (Amendment 1)(Endurance test for O-Ring, Washer and Stopper)	-	1000	-
7.1.3(Overall migration)	-	1000	-
7.1.3 (Amendment 1)(O-Ring and washer- Hardness)	-	1000	-
7.1.3 (Amendment 1)(O-Ring and washer-- BPA)	-	1000	-
7.1.3(Stopper Material)	-	1000	-

08 May, 2028

-
Included w.e.f 07.08.2025

4877

CIPET, Hyderabad

6111634

IS 2508 (2024)

Polyethylene Films and Sheets â Specification (Fourth Revision)

Polyethylene Films and Sheet

14938 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.4 Sl No. (i) of Table 1, Table 2, Table 3 & Table 4.(Density - IS 13360 : Part 3 : Sec 10 : 2021)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.6(Black Film- Carbon black - IS 2508:2024)	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.6(Ash content - IS 2508: 2024)	-	950	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.6(carbon black dispersion - IS 2530: 1963)	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.1(Appearance)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.2(Film Form)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.3(Odour)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.5(Melt Flow Index- IS 13360 : Part 4 : Sec 1 : subsec 1 or IS 13360 : Part 4 : Sec 1 : subsec 2)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
5.2.1.1/ Table-1,2,3 &4(Nominal Thickness, Annex C,)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
5.2.1.2(Nominal Width)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
6, Type 1 (LDPE/LLDPE) /Table-1("Tensile strength at break-Machine direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	1350	25% DISCOUNT ON TEST CHARGES FOR BIS
6/Table-1("Tensile strength at break-Transverse direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
6/Table-1("Elongation % at break, -Machine direction,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	2450	25% DISCOUNT ON TEST CHARGES FOR BIS
6/Table-1("Ageing test at (70 ± 1) ºC for 7 days-Machine Direction, IS 7016 (Part 8) followed by IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	4500	25% DISCOUNT ON TEST CHARGES FOR BIS
6/Table-1("Ageing test at (70 ± 1) ºC for 7 days- Transverse Direction, IS 7016 (Part 8) followed by IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	4500	25% DISCOUNT ON TEST CHARGES FOR BIS
6/Table-1(Dart impact strength,Method B of IS 13360 (Part 5/Sec 6))	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
6/Table-1(Tear resistance -Machine direction, IS 13360 (Part 5/Sec 23))	-	1350	25% DISCOUNT ON TEST CHARGES FOR BIS
6/Table-1(Tear resistance-Transverse direction, IS 13360 (Part 5/Sec 23))	-	1350	25% DISCOUNT ON TEST CHARGES FOR BIS
" 7, Type 2 (HDPE/PE) /Table-2"("Tensile strength at break-Machine direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	1350	25% DISCOUNT ON TEST CHARGES FOR BIS
" 7/Table-2"("Tensile strength at break-Transverse direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
" 7/Table-2"("Elongation % at break, -Machine direction,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	2450	25% DISCOUNT ON TEST CHARGES FOR BIS
" 7/Table-2"("Elongation % at break, -Transverse direction,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	2200	25% DISCOUNT ON TEST CHARGES FOR BIS
" 7/Table-2"("Ageing test at (70 ± 1) ºC for 7 days-Machine Direction, IS 7016 (Part 8) followed by IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	4500	25% DISCOUNT ON TEST CHARGES FOR BIS
" 7/Table-2"("Ageing test at (70 ± 1) ºC for 7 days- Transverse Direction, IS 7016 (Part 8) followed by IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	4500	25% DISCOUNT ON TEST CHARGES FOR BIS
" 7/Table-2"(Dart impact strength,Method B of IS 13360 (Part 5/Sec 6))	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
8, Type 3 (LDPE/LLDPE, PE) /Table-3("Average Tensile Break strength- Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1350	25% DISCOUNT ON TEST CHARGES FOR BIS
8/Table-3("Average Tensile Break strength- Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
8/Table-3("Average Tensile Break Elongation %-Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	2450	25% DISCOUNT ON TEST CHARGES FOR BIS
8/Table-3("Average Tensile Break Elongation %-Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	2200	25% DISCOUNT ON TEST CHARGES FOR BIS
8/Table-3(Average Tear resistance, IS 2508: 2024 Annex-D)	-	1350	25% DISCOUNT ON TEST CHARGES FOR BIS
8/Table-3(Average Puncture resistance, IS 2508: 2024 Annex-E)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
9, Type 4 (HDPE/PE) /Table-4("Average Yield strength- Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
9/Table-4("Average Yield strength- Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
9/Table-4("Average Tensile Break strength- Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
9/Table-4("Average Tensile Break strength- Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
9/Table-4("Average Tensile yield Elongation %-Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	2200	25% DISCOUNT ON TEST CHARGES FOR BIS
9/Table-4("Average Tensile yield Elongation %-Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	2450	25% DISCOUNT ON TEST CHARGES FOR BIS
9/Table-4(Average Tensile Break Elongation %-Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3))	-	24500	25% DISCOUNT ON TEST CHARGES FOR BIS
9/Table-4(Average Tensile Break Elongation -Transverse Direction, IS 13360 (Part 5/Sec 1) and S 13360 (Part 5/Sec 3))	-	2200	25% DISCOUNT ON TEST CHARGES FOR BIS
9/Table-4(Average Tear resistance, IS 2508: 2024 Annex-D)	-	2450	25% DISCOUNT ON TEST CHARGES FOR BIS
6/Table-1("Elongation % at break, -Transverse direction,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	2200	25% DISCOUNT ON TEST CHARGES FOR BIS

23 Feb, 2027

-
Included w.e.f 28.07.2025

4878

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS 302 : Part 2 : Sec 203 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 203 electric call bells and buzzers for indoor use

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Rating)	-	500	5% Discount For BIS
6(Classification)	-	500	-
7(Marking)	-	1000	-
8(Protection against Access to Live Parts)	-	2000	-
9(Starting Of Motor Operated Appliances)	-	500	-
10("Power Input & Current")	-	2000	-
11(Temperature Rise/ Heating)	-	5000	-
12(Operation Under Overload Conditions of Appliances with heating Element)	-	1500	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	1500	-
14("Radio and Television Interference Suppression / Transient Over Voltage ")	-	2000	-
15(Moisture Resistance)	-	5000	-
16(Leakage Current and Electric Strength/ Insulation Resistance and Electric Strength (After Humidity treatment))	-	1500	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	5000	-
18(Endurance)	-	5000	-
19(Abnormal Operation)	-	5000	-
20(Stability & Mechanical Hazards)	-	1000	-
21(Mechanical strength)	-	2000	-
22(Construction)	-	5000	-
23(Internal Wiring)	-	2000	-
24(Components)	-	2000	-
25(Supply Connection & External Flexible Cords)	-	1000	-
26(Terminals For External Conductors)	-	1500	-
27(Provision For Earthing)	-	1000	-
28(Screws & Connections)	-	1000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	1000	-
30(Resistance to Heat & Fire)	-	5000	-
31(Resistance to Rusting)	-	2000	-
32(Radiation hazards)	-	1000	-
Cl 19.11.4.1(Electrostatic discharges)	-	10000	-
Cl 19.11.4.2(Radiated fields)	-	25000	-
Cl 19.11.4.3(Fast transient bursts)	-	15000	-
Cl 19.11.4.4(Surge immunity test)	-	10000	-
Cl 19.11.4.5(Immunity to conducted discharges)	-	50000	-
Cl 19.11.4.6(Class 3 Voltage dips and interruptions)	-	10000	-
Cl 19.11.4.7(Harmonics)	-	20000	-

-
Included w.e.f.21.08.2025

4879

BIS, Central Laboratory (CL)

None

IS 17153 (2019)

Domestic gas stoves for use with piped natural gas (PNG) - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
25.1 (Temperature of the surface in normal use)	-

-
-

4880

EKO PRO ENGINEERS PRIVATE LIMITED (32/41), GHAZIABAD

9179706

IS 6719 (1972)

Solid Pvc Soles And Heels

ALL

3500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.6.1(Hardness )	-	300	-
3.6 (vi)(Lead (as Pb) ppm)	-	500	-
3.6 (v)(Volatility, percent by means )	-	400	-
3.6 (iv)(Tear Strength a) Force Part b) Back Part )	-	400	-
3.6 (iii)(Elongation at break, percent )	-	400	-
3.6 (ii)(Tensile Strength )	-	500	-
3.6 (i)(Relative density )	-	300	-
Cl. 3.1,3.2,3.3,3.4,3.5(Material)	-	400	-
6 ,6.1,6.2,6.3(Test Method)	-	300	-
Cl. 3.1,3.2,3.3,3.4,3.5(Material)	-	400	-
Cl. 6.4(Measurement of thickness)	-	200	-
Table 1 (Flexing resistance)(Table 1 (Flexing resistance, Bennewart method, cut growth at the end of 30 000 cycles, mm, Max))	-	300	-
Table 1 (Abrasion resistance)(Abrasion resistance at applied force of 10 N (volume loss), mm3, Max)	-	400	-
Table 1 Cl. 3.6, Sl No (iii)(Volatility, Percent by mass)	-	500	-
Table 1 Cl. 3.6, Sl No (iv)("Lead (as Pb), Shoes for infants, children and boys and girls, ppm")	-	500	-
Table 1 Cl. 3.6, Sl No (iv)("Lead (as Pb), for other sized shoes, ppm ")	-	500	-

-
Included w.e.f. 01.09.2025

4881

BIS, Central Laboratory (CL)

None

IS 11805 (2007)

Polyethylene pouches for packaging liquid milk - Specification - (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.5 (Thickness)	-

-
-

4882

BIS, Central Laboratory (CL)

None

IS 14787 (2000)

Unplasticized pvc pipes (Ducts) and fittings for underground telecommunications cable installation - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1 (Diameter and wall thickness)	-

-
-

4883

BIS, Central Laboratory (CL)

None

IS 12232 : Part 2 (1995)

Irrigation equipment - Rotating sprinkler: Part 2 test method for uniformity of distribution (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Test of Construction and parts)	-

-
-

4884

BIS, Central Laboratory (CL)

None

IS 12232 : Part 1 (1996)

Irrigation equipment - Rotating sprinkler: Part 1 design and operational requirements (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2.1 (Construction and workmanship)	-

-
-

4885

BIS, Southern Regional Laboratory (SRL)

None

IS 2556 : Part 2 (2024)

Vitreous China Sanitary Appliances âSpecification Part 2 Specific Requirements of Washdown Water Closets (Sixth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
As per Clause 3 (General requirements - Chemical Resistance Test as per IS 2556 (Part 1))	-
As per Clause 3 (General requirements - Resistance to Staining and Burning as per IS 2556 (Part 1))	-
Cl-5 (DIMENSIONS AND TOLERANCES)	-
Cl-7 (FINISH)	-

-
-

4886

BIS, Central Laboratory (CL)

None

IS 12785 (1994)

Irrigation equipment - Strainer - Type filters - Specification (first revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1.1 (General)	-
4.1.1 (General)	-
4.1.1 (General)	-
4.1.1 (General)	-
4.1.1 (General - The hot dip galvanizing shall be done in accordance with IS 4736 with a minimum zinc coating)	-
4.1.1 (General - Thickness of powder coating IS 5116.)	-
4.1.2 (General)	-
4.1.3 (General)	-
4.1.4 (General)	-
4.2.1 (Strainer Housing)	-
4.2.3 (Strainer Housing)	-
4.3.1 (Connections IS 2643 : 1975.)	-
4.3.2 (Connections IS 6418 : 1971)	-
4.3.3 (Connections)	-
6.1 (MECHANiCAL TESTS)	-
6.2 (MECHANiCAL TESTS )	-
6.3 (MECHANiCAL TESTS )	-
6.4 (MECHANiCAL TESTS )	-
6.5 (MECHANiCAL TESTS )	-
7 (Marking)	-

-
-

4887

BIS, Central Laboratory (CL)

None

IS 13487 (2024)

Irrigation Equipment — Emitters — Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5.2 (Emitter Ends)	-
Cl-5.3 (Materials)	-
Cl-7.1 (Construction and Workmanship)	-
Cl-7.2 (Flow Paths in Emitter)	-
Cl-7.3 (Resistance to Hydrostatic Pressure)	-
Cl-7.4 (Emitter Pull-Out)	-
Cl-7.4.1 (In-Line Emitters)	-
Cl-7.4.2 (On-Line Emitters)	-
Cl-8.1.1 (Uniformity of Emission Rate)	-
Cl-8.1.2 (Emission Rate as Function of Inlet Pressure)	-
Cl-8.1.3 (Determination of Emitter Exponent)	-
Cl-9 (Marking)	-

-
-

4888

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 17790 (2022)

INSULATED FLASK FOR DOMESTIC USE SPECIFICATION

ALL

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Manufacture and Workmanship)	-	1000	-
5.3(Welding Defects)	-	1000	-
7.1(Material)	-	1000	-
7.1.2.1 & 7.1.2.2(Thickness)	-	1000	-
7.1.3(Coating Thickness)	-	1000	-
7.1.3(Material – coating cadmium)	-	1000	-
7.1.2.2(Bisphenol A (BPA))	-	1000	-
7.1.4.3(O-Ring / Washer- Defects)	-	1000	-
7.2(Capacity)	-	1000	-
7.3(Heat Retention Capability)	-	1000	-
7.4(Cold Retention Capability)	-	1000	-
7.5.1(Drop Impact Test)	-	1000	-
7.5.2(Pendulum Impact Test)	-	1000	-
7.6(Fixing Strength of the Handle)	-	1000	-
7.7(Test for Strength of Shoulder Strap)	-	1000	-
7.8(Test for strength of cord)	-	1000	-
7.9(Leakage Test)	-	1000	-
7.10(Joint Leak Test)	-	1000	-
7.11(Staining Test)	-	1000	-
7.13(Seepage test)	-	1000	-
7.14(Test for Lever, device for operating Or regulating flow test)	-	1000	-
7.15(Test for length of the shoulder cap)	-	1000	-
7.16(Stability of Flask)	-	1000	-
7.17(Pour Test)	-	1000	-
9.1(Marking)	-	1000	-
9.2(BIS certification marking)	-	1000	-
10(Packaging)	-	1000	-
7.1.3(Coating- Adhesion test)	-	1000	-
7.1.3(Coating - Thickness test)	-	1000	-
7.1.3(Coating- Salt water corrosion test)	-	1000	-
7.1.4.1(Stopper)	-	1000	-
7.1.4.2(O-ring/washer- Overall migration)	-	1000	-
7.1.4.2(O-ring/washer- Shore hardness)	-	1000	-
7.1.4.2(O-ring/washer- BPA)	-	1000	-
7.1.5(Auxillary closure)	-	1000	-
7.12(Check for PUF (Polyurethane Foam) or Any Other Similar Thermal Insulation Material)	-	1000	-
7.18(Endurance Test for O-Ring, Washer and Stopper)	-	1000	-
5.0(Manufacture and Workmanship)	-	-	-
5.3(Welding Defects)	-	-	-
7.1(Material)	-	-	-
7.1.2.1 & 7.1.2.2(Thickness)	-	-	-
7.1.3(Coating Thickness)	-	-	-
7.1.3(Material – coating cadmium)	-	-	-
7.1.2.2(Bisphenol A (BPA))	-	-	-
7.1.4.3(O-Ring / Washer- Defects)	-	-	-
7.2(Capacity)	-	-	-
7.3(Heat Retention Capability)	-	-	-
7.4(Cold Retention Capability)	-	-	-
7.5.1(Drop Impact Test)	-	-	-
7.5.2(Pendulum Impact Test)	-	-	-
7.6(Fixing Strength of the Handle)	-	-	-
7.7(Test for Strength of Shoulder Strap)	-	-	-
7.8(Test for strength of cord)	-	-	-
7.9(Leakage Test)	-	-	-
7.10(Joint Leak Test)	-	-	-
7.11(Staining Test)	-	-	-
7.13(Seepage test)	-	-	-
7.14(Test for Lever, device for operating Or regulating flow test)	-	-	-
7.15(Test for length of the shoulder cap)	-	-	-
7.16(Stability of Flask)	-	-	-
7.17(Pour Test)	-	-	-
9.1(Marking)	-	-	-
9.2(BIS certification marking)	-	-	-
10(Packaging)	-	-	-
7.1.3(Coating- Adhesion test)	-	-	-
7.1.3(Coating - Thickness test)	-	-	-
7.1.3(Coating- Salt water corrosion test)	-	-	-
7.1.4.1(Stopper)	-	-	-
7.1.4.2(O-ring/washer- Overall migration)	-	-	-
7.1.4.2(O-ring/washer- Shore hardness)	-	-	-
7.1.4.2(O-ring/washer- BPA)	-	-	-
7.1.5(Auxillary closure)	-	-	-
7.12(Check for PUF (Polyurethane Foam) or Any Other Similar Thermal Insulation Material)	-	-	-
7.18(Endurance Test for O-Ring, Washer and Stopper)	-	-	-
Cl-5.3(Welding Electrode)	-	-	-
Cl.7.1.2.1(Test for leaching)	-	-	-
Cl. 7.1.2.1(Sensorial Test)	-	-	-
Cl-7.1.3, Table-1(Lead Limit)	-	-	-

08 May, 2028

-
Included w.e.f. 18.08.2025

4889

Sleen India Biz venture Private Limited, Agra

9139736

IS 6100 (2021)

SPECIFICATION FOR SODIUM TRIPOLYPHOSPHATE ANHYDROUS TECHNICALSecond Revision of IS 6100

21800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Description - IS 6100:2021)	-	500	-
3.2(Sieve Analysis (Retained on 500 micron IS Sieve) - IS 6100:2021)	-	500	-
3.2(Sieve Analysis (Passing through 500 micron IS Sieve but retained on 150 micron IS sieve) - IS 6100:2021)	-	0	Complete test price for cl.3.2 is 500/-.
3.2(Sieve Analysis (Passing through 150 micron IS Sieve but retained on 75 micron IS sieve) - IS 6100:2021)	-	0	Complete test price for cl.3.2 is 500/-.
3.2(Sieve Analysis (Passing through 75 micron IS Sieve) - IS 6100:2021)	-	0	Complete test price for cl.3.2 is 500/-.
3.3/Table 1 (i)(Moisture - IS 6100:2021)	-	500	-
3.3/Table 1 (ii)(Matter insoluble in water - IS 6100:2021)	-	900	-
3.3/Table 1 (iii)(Phosphorus (as P2O5) - IS 6100:2021)	-	3000	-
3.3/Table 1 (iv)(pH - IS 6100:2021)	-	900	-
3.3/Table 1 (v)(Iron (as Fe2O3) - IS 6100:2021)	-	3000	-
3.3/Table 1 (vi)(Copper (as Cu) - IS 6100:2021)	-	3000	-
3.3/Table 1 (vii)(Lead (as Pb) - IS 6100:2021)	-	2000	-
3.3/Table 1 (viii)(Tripolyphosphate content (as Na5P3O10) - IS 6100:2021)	-	3000	-
3.3/Table 1 (ix)(Chloride (as NaCl) - IS 6100:2021)	-	1500	-
3.3/Table 1 (x)(Fluoride (as NaF) - IS 6100:2021)	-	1000	-
3.3/Table 1 (xi)(Bulk Density - IS 6100:2021)	-	1000	-
3.4(Temperature Rise - IS 6100:2021)	-	1500	-

-
Included w.e.f 01.08.2025

4890

AANKAN CALIBRATION AND TESTING CENTRE LLP, DANTLI

7184406

IS 12406 (2021)

Medium density fibre boards for general purpose - Specification

Grade 1&2,class E1&E2,Size: Thickness upto 70mm

17000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clauses 5.2, 9 and 10.2.2(Density)	-	1000	For Density Test
Clauses 5.2, 9 and 10.2.2(Density)	-	0	-
Clauses 5.2, 9 and 10.2.2(Variation from mean density)	-	0	-
Clauses 5.2, 9 and 10.2.2(Moisture Content)	-	1000	For Moisture Content Test
Clauses 5.2, 9 and 10.2.2(Variation from mean moisture content)	-	0	-
Clauses 5.2, 9 and 10.2.2(Linear expansion (Thickness Swelling in Water) Due to general Absorption after 24h soaking)	-	3000	For Linear expansion Test
Clauses 5.2, 9 and 10.2.2(Internal Bond Strength)	-	1000	For Internal Bond Strength Test
Clauses 5.2, 9 and 10.2.2(Internal Bond strength (i) (After Cyclic test) (ii) (After accelerated water resistance test))	-	3000	For Internal Bond Strength Test
Clauses 5.2, 9 and 10.2.2(Modulus of Rupture a) Avg. Value b) Min. Individual)	-	1000	For Modulus of rupture test
Clauses 5.2, 9 and 10.2.2(Modulus of Elasticity a) Avg. Value b) Min. Individual)	-	1000	For Modulus of elasticity test
Clauses 5.2, 9 and 10.2.2(Screw withdrawl strength (i) Face (ii) Edge (For thickness >12mm))	-	2000	For screw withdrwal strength test
Clauses 5.2, 9 and 10.2.2(Formaldehyde Content (i) For Formaldehyde Class, E1 (ii) For Formaldehyde Class, E2)	-	3000	For formaldehyde content test
Clauses 5.2, 9 and 10.2.2(Steady State Formaldehyde emission (Fc (i) For Formaldehyde Class, E1 (ii) For Formaldehyde Class, E2)	-	0	-
8(DIMENSIONS AND TOLERANCES)	-	1000	For DIMENSIONS Test
Cl-11(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	0	-
Cl 7(Finish)	-	0	-

-
Included w.e.f 04.08.2025 Exclusion: Clauses 5.2, 9 and 10.2.2 (Steady State Formaldehyde emission (Fc (i) For Formaldehyde Class, E1 (ii) For Formaldehyde Class, E2)

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number