BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15634 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

4981

NSIC - Technical Services Centre, Rajkot

7104734

IS 12818 (2010)

Unplasticized polyvinyl chloride (Pvc - U) screen and casing pipes for bore/tubewells - Specification (Second Revision)

13150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.6(Vicat Softening Temperature IS 12235 (Part 2).)	-	1100	5% discount for BIS. Applicable for all test.
9.5(Tensile Strength IS 12235(Part 13))	-	1100	-
9.4 and Table 14(Resistance to External Blows at 0 ?C IS 12235 (Part 9))	-	1400	-
9.3(Density IS 12235 (Part 14))	-	500	-
9.2(Internal Diameter)	-	500	-
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Max)	-	500	-
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Min)	-	500	-
7.2 and Table 5, 6 & 7 Fig 1B(DIMENSIONS - Casing Pipes)	-	1000	-
9.7(Effect on Water a) Lead (first extraction) b) Lead (Third extraction) c) Dialkyl Tin C4 & higher homologues measured as Tin (Third extraction) d) Cadmium (All three extracts) e) Mercury (All three extracts) f) Other Toxic Substances )	-	3000	-
4.1.1 (VCM Content as per IS 10151 (Annex A))	-	3000	-
4.1.2(K-Value as per IS-4669)	-	950	-

14 Jun, 2028

-
-

4982

NSIC - Technical Services Centre, Rajkot

7104734

IS 4985 (2021)

UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision

25725 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-7.1(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6))	-	500	5% discount for BIS. Applicable for all test.
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	500	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	0	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation)	-	0	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	0	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	0	-
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	0	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	0	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	0	-
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	0	-
Cl- 7.2(Socket length (Take 4 reading & minimum will be reported))	-	0	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	0	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	0	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-	0	-
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	575	-
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	1100	-
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1100	-
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	500	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	11000	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	850	-
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	850	-
11.2(Resistance to External Blows at 0°C)	-	1400	-
10.3(Effect on Water Test)	-	3000	-
6.1.1(VCM Content)	-	3000	-
10.7(Sulphated Ash Content)	-	950	-
6.1.2(PVC Resin)	-	3950	K Value - 950 Rs VCM Content - 3000 Rs

14 Jun, 2028

-
-

4983

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 21 (2025)

Wrought Aluminium and Aluminium Alloys for Manufacture of Utensils - Specification (Fifth Revision)

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4(General requirements)	-	10500		-

-
-

4984

IEC TEST LABS LLP

8165726

IS 14494 (2019)

Elastomer insulated flexible cables for use in mines - Specification (First Revision)

55000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(CONDUCTOR)	-	1000	Rs. 55,000/- [ 1.1 kV ] Rs. 75,000/- [ 3.3 kV ] Rs. 125,000/- [ 3.8/6.6 kV ]
5(INSULATION)	-	1000	-
5.1(Power Cores)	-	1000	-
5.2(Pilot and Earth Cores)	-	1000	-
6(SEMI-CONDUCTING COMPOUND)	-	1000	-
7.1(TAPE : Proofed Tape)	-	1000	-
7.2(TAPE : Polyethylene Terephalate (PETP) or Polypropylene Base Tape)	-	1000	-
7.3(TAPE )	-	1000	-
8(CENTRE)	-	1000	-
9.1(FILLERS)	-	1000	-
9.2(FILLERS)	-	1000	-
10(CRADLE SEPARATOR)	-	1000	-
11.1(ARMOUR)	-	1000	-
11.2(ARMOUR)	-	1000	-
11.2 a)(ARMOURING: Tensile Strength)	-	2000	-
11.2 b)(ARMOURING: Elongation )	-	2000	-
11.2 c)(ARMOURING: Torsion Test (For round wire ) )	-	2000	-
11.2 d)(ARMOURING: Uniformity of zinc coating)	-	2000	-
11.2 e)(ARMOURING: Mass of zinc coating )	-	2000	-
12.1(SHEATH : Inner Sheath)	-	1000	-
12.2(SHEATH : Outer Sheath)	-	1000	-
13.1(REINFORCEMENT MATERIAL : Tape)	-	1000	-
13.2(REINFORCEMENT MATERIAL : Cord/Yarns)	-	1000	-
14.1(CONSTRUCTION : CONDUCTOR)	-	1000	-
14.2(CONSTRUCTION : CONDUCTOR)	-	1000	-
14.3(CONSTRUCTION : CONDUCTOR)	-	1000	-
14.4(CONSTRUCTION : CONDUCTOR)	-	1000	-
15(CONDUCTOR SCREENING)	-	1000	-
16.1(INSULATION)	-	1000	-
16.2(INSULATION : Thickness of Insulation)	-	2000	-
16.3(INSULATION : Tolerance on Insulation Thickness)	-	2000	-
16.4(INSULATION : Application of Insulation)	-	1000	-
16.5(INSULATION)	-	1000	-
17.1(INSULATION SCREEN)	-	1000	-
17.2(INSULATION SCREEN)	-	1000	-
17.3(INSULATION SCREEN)	-	1000	-
17.4(INSULATION SCREEN)	-	1000	-
18(PROTECTIVE SCREEN)	-	1000	-
19(CONDUCTANCE OF SCREEN)	-	1000	-
19.1(Individual Core Screen)	-	1000	-
19.2(Collective Screen)	-	1000	-
20.1(CORE IDENTIFICATION)	-	1000	-
20.2(Colour Scheme for Identification)	-	1000	-
20.3(Scheme for Identification by Numbering)	-	1000	-
21.1(LAYING UP OF CORES)	-	1000	-
21.2(LAYING UP OF CORES)	-	1000	-
21.3(LAYING UP OF CORES)	-	1000	-
21.4(LAYING UP OF CORES)	-	1000	-
22.1(INNER SHEATH)	-	1000	-
22.2(Thickness of Inner Sheath)	-	2000	-
22.3(INNER SHEATH)	-	1000	-
23.1(ARMOURING)	-	1000	-
23.2(ARMOURING)	-	1000	-
23.3(ARMOURING)	-	1000	-
23.4(ARMOURING)	-	1000	-
24.1(OUTER SHEATH)	-	1000	-
24.2(Thickness of Outer Sheath)	-	2000	-
24.3(Tolerance on Thickness of Outer Sheath)	-	2000	-
24.4(OUTER SHEATH)	-	1000	-
25.1(CABLE CONSTRUCTION AND DIMENSIONS)	-	2000	-
27.2(Bending test followed by partial discharge test;)	-	50000	-
27.4(Dielectric power factor test)	-	50000	-
27.5(Heating cycle test followed by partial discharge test;)	-	50000	-
27.6(Impulse voltage test; and)	-	50000	-
26.3(Special Provisions)	-	5000	-
27.8(Flammability Test)	-	5000	-
27.9(Water Absorption Test)	-	10000	-
28(IDENTIFICATION)	-	1000	-
29.1(PACKING AND MARKING)	-	1000	-
29.2(PACKING AND MARKING)	-	1000	-
30(BIS CERTIFICATION MARKING)	-	1000	-
Table 33®, Annex E(Electric tset on semi-conducting screen)	-	5000	-
Table 33(n), Cl. No. 27.7(High Voltage test for 4 hrs.)	-	30000	-
Table 33(j), Cl. No. 27.4(Dielectric Power Factor (as a function of Voltage))	-	50000	-
Table 33(h), Cl. No. 27.2(Partial discharge test)	-	50000	-
Table 33(f)(Insulation resistance)	-	10000	-
Table 33(e)(Tear resistance on sheath)	-	5000	-
Table 33(e)(Oil resistance - Elongation on sheath)	-	10000	-
Table 33(e)(Oil resistance - Tensile strength on sheath)	-	10000	-
Table 33(e)(Permanent set on Sheath)	-	5000	-
Table 33(e)(Hot set on Sheath)	-	5000	-
Table 33(e)(Ageing in air bomb - Elongation on Sheath)	-	10000	-
Table 33(e)(Ageing in air bomb - Tensile strength on Sheath)	-	10000	-
Table 33(e)(Elongation at break on Sheath)	-	10000	-
Table 33(e)(Tensile strength on Sheath)	-	10000	-
Table 33(d)(Ozone resistance on Insulation)	-	10000	-
Table 33(d)(Permanent set on Insulation)	-	5000	-
Table 33(d)(Hot set on Insulation)	-	5000	-
Table 33(d)(Ageing in air bomb - Elongation on Insulation)	-	10000	-
Table 33(d)(Ageing in air bomb - Tensile strength on Insulation)	-	10000	-
Table 33(d)(Ageing in air oven - Elongation on Insulation)	-	10000	-
Table 33(d)(Ageing in air oven - Tensile strength on Insulation)	-	10000	-
Table 33(d)(Elongation at break on Insulation)	-	10000	-
Table 33(d)(Tensile strength on Insulation)	-	10000	-
Table 33(c)(Resistivity of steel wire)	-	5000	-
Table 33(b)(Diameter of armour wire)	-	2000	-
Table 4(Copper purity test)	-	5000	-
Table 33(a)(Conductor resistance test)	-	5000	-
Table 33(a)(Annealing test)	-	2000	-
[ Cl.12.2 & Table 3 IS:6380-1984](Physical tests on Outer Sheath ( Without ageing))	-	5000	-
[ Cl.12.2 & Table 3 IS:6380-1984](Physical tests on Outer Sheath ( Without ageing))	-	5000	-
[ Cl.12.2 & Table 3 IS:6380-1984](Physical tests on Outer Sheath ( Without ageing))	-	5000	-
[ Cl.12.2 & Table 3 IS:6380-1984](Physical tests on Outer Sheath ( After ageing in air bomb)	-	5000	-
[ Cl.12.2 & Table 3 IS:6380-1984](Physical tests on Outer Sheath ( After ageing in air bomb)	-	5000	-
[ Cl.12.2 & Table 3 IS:6380-1984](Physical tests on Outer Sheath (Oil resistance test ))	-	5000	-
[ Cl.12.2 & Table 3 IS:6380-1984](Physical tests on Outer Sheath)	-	5000	-
[ Cl.12.2 & Table 3 IS:6380-1984](Physical tests on Outer Sheath (Hot set test))	-	5000	-
[ Cl.12.2 & Table 3 IS:6380-1984](Physical tests on Outer Sheath (Hot set test))	-	5000	-
[ Cl.12.2 & Table 3 IS:6380-1984](Physical tests on Outer Sheath (Hot set test))	-	5000	-
[ Table 2 of IS:6380-1984](Insulation resistance constant)	-	10000	-
[ Table 2 of IS:6380-1984](Insulation resistance constant)	-	10000	-
[ Cl.5 & Table 2 of IS:6380-1984](Physical tests on Outer Sheath ( Without ageing))	-	5000	-
[ Cl.5 & Table 2 of IS:6380-1984](Physical tests on Outer Sheath ( Without ageing))	-	5000	-
[ Cl.5 & Table 2 of IS:6380-1984](Physical tests on insulation (After ageing in air oven:))	-	5000	-
[ Cl.5 & Table 2 of IS:6380-1984](Physical tests on insulation (After ageing in air oven:))	-	5000	-
[ Cl.5 & Table 2 of IS:6380-1984](Physical tests on insulation (After ageing in air bomb ))	-	5000	-
[ Cl.5 & Table 2 of IS:6380-1984](Physical tests on insulation (After ageing in air bomb ))	-	5000	-
[ Cl.5 & Table 2 of IS:6380-1984](Physical tests on Insulation (Hot set test))	-	5000	-
[ Cl.5 & Table 2 of IS:6380-1984](Physical tests on Insulation (Hot set test))	-	5000	-
[ Cl.4 & 14](Conductor)	-	5000	-
[ Cl.4 & 14](Conductor)	-	5000	-
[ Cl.4 & 14](Conductor)	-	1000	-
[ Cl.4 & 14](Conductor)	-	1000	-
[ Cl.4 & 14](Conductor)	-	1000	-
[ Cl.4 & 14](Conductor)	-	1000	-
[ Cl.4 & 14](Conductor)	-	1000	-
[Cl.14.4](Conductor)	-	1000	-
Cl. 27.7(High voltage test for 4 hours)	-	30000	-

07 Sep, 2029

-
"1 Table 33®, Annex E (Electric tset on semi-conducting screen) Electrical Test Test Facility Not Available 2 27.2 (Bending test followed by partial discharge test;) Partial Discharge test Test Facility Not Available 3 27.4 (Dielectric power factor test) Dielectric Power Factor Test Test Facility Not Available 4 27.5 (Heating cycle test followed by partial discharge test;) Heating cycle test followed by partial discharge test Test Facility Not Available 5 27.6 (Impulse voltage test; and) Impulse Voltage test Test Facility Not Available 6 Table 33(j), Cl. No. 27.4 (Dielectric Power Factor (as a function of Voltage)) Dielectric Power Factor test Test Facility Not Available 7 Table 33(h), Cl. No. 27.2 (Partial discharge test) Partial discharge test Test Facility Not Available"

4985

Sleen India Biz venture Private Limited, Agra

9139736

IS 15041 (2001)

Textiles – Flat woven webbing slings made of man-made fibres for general services

Polyamide,Polyester and Polypropylene HTCM

22500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(REQUIREMENTS :-Webbing)	-	2500	-
4.1.2.1(Weaving)	-	1500	-
4.1.2.2(Weaving)	-	500	-
4.1.3(Width)	-	1000	-
4.1.4(Thickness)	-	500	-
4.1.5( Dyeing)	-	3000	-
4.1.6(Other Treatments, Afiertreatments or Coverings)	-	3000	-
4.2.1(Sewing of Slings)	-	250	-
4.2.2(Sewing of Slings)	-	250	-
4.2.3(Sewing of Slings)	-	250	-
4.2.3.1(Sewing of Slings)	-	250	-
4.2.4 (Sewing of Slings)	-	250	-
4.2.4.1(Sewing of Slings)	-	250	-
4.2.5(Sewing of Slings)	-	250	-
4.2.5.1(Sewing of Slings)	-	250	-
4.3.1,Fig. 10(Soft Eyes)	-	500	-
4.3.2(Soft Eyes)	-	500	-
4.4.1(End Fittings :General)	-	500	-
4.4.2(End Fittings :Material)	-	1000	-
4.4.3 (End Fittings :-Finish)	-	500	-
4.4.4 (End Fittings :-Form)	-	500	-
4.4.5 & 5.4(End Fittings :-Proof Testing)	-	1000	-
4.5 & 5.2(Working Load Limit)	-	2000	-
4.6 & A-2(Maximum Safe Working Load)	-	2000	-
6.1 (a)(MARKING)	-	1000	-
6.1 (b)(MARKING)	-	0	Complete test price for cl. 6.1 Marking is 1000/-.
6.1 (c)(MARKING)	-	0	Complete test price for cl. 6.1 Marking is 1000/-.
6.1 (d)(MARKING)	-	0	Complete test price for cl. 6.1 Marking is 1000/-.
6.1 (e)(MARKING)	-	0	Complete test price for cl. 6.1 Marking is 1000/-.
6.2(MARKING)	-	0	Complete test price for cl. 6.1 Marking is 1000/-.
4.1.1(REQUIREMENTS :-Webbing)	-	0	Repeated Clause.
4.1.2.1(Weaving)	-	0	Repeated Clause.
4.1.2.2(Weaving)	-	0	Repeated Clause.
4.1.3(Width)	-	0	Repeated Clause.
4.1.4(Thickness)	-	0	Repeated Clause.
4.1.5( Dyeing)	-	0	Repeated Clause.
4.1.6(Other Treatments, Afiertreatments or Coverings)	-	0	Repeated Clause.
4.2.1(Sewing of Slings)	-	0	Repeated Clause.
4.2.2(Sewing of Slings)	-	0	Repeated Clause.
4.2.3(Sewing of Slings)	-	0	Repeated Clause.
4.2.3.1(Sewing of Slings)	-	0	Repeated Clause.
4.2.4 (Sewing of Slings)	-	0	Repeated Clause.
4.2.4.1(Sewing of Slings)	-	0	Repeated Clause.
4.2.5(Sewing of Slings)	-	0	Repeated Clause.
4.2.5.1(Sewing of Slings)	-	0	Repeated Clause.
4.3.1,Fig. 10(Soft Eyes)	-	0	Repeated Clause.
4.3.2(Soft Eyes)	-	0	Repeated Clause.
4.4.1(End Fittings :General)	-	0	Repeated Clause.
4.4.2(End Fittings :Material)	-	0	Repeated Clause.
4.4.3 (End Fittings :-Finish)	-	0	Repeated Clause.
4.4.4 (End Fittings :-Form)	-	0	Repeated Clause.
4.4.5 & 5.4(End Fittings :-Proof Testing)	-	0	Repeated Clause.
4.5 & 5.2(Working Load Limit)	-	0	Repeated Clause.
4.6 & A-2(Maximum Safe Working Load)	-	0	Repeated Clause.
6.1 (a)(MARKING)	-	0	Repeated Clause.
6.1 (b)(MARKING)	-	0	Repeated Clause.
6.1 (c)(MARKING)	-	0	Repeated Clause.
6.1 (d)(MARKING)	-	0	Repeated Clause.
6.1 (e)(MARKING)	-	0	Repeated Clause.
6.2(MARKING)	-	0	Repeated Clause.
4.1.1(REQUIREMENTS :-Webbing)	-	0	Repeated Clause.
4.1.2.1(Weaving)	-	0	Repeated Clause.
4.1.2.2(Weaving)	-	0	Repeated Clause.
4.1.3(Width)	-	0	Repeated Clause.
4.1.4(Thickness)	-	0	Repeated Clause.
4.1.5( Dyeing)	-	0	Repeated Clause.
4.1.6(Other Treatments, Afiertreatments or Coverings)	-	0	Repeated Clause.
4.2.1(Sewing of Slings)	-	0	Repeated Clause.
4.2.2(Sewing of Slings)	-	0	Repeated Clause.
4.2.3(Sewing of Slings)	-	0	Repeated Clause.
4.2.3.1(Sewing of Slings)	-	0	Repeated Clause.
4.2.4 (Sewing of Slings)	-	0	Repeated Clause.
4.2.4.1(Sewing of Slings)	-	0	Repeated Clause.
4.2.5(Sewing of Slings)	-	0	Repeated Clause.
4.2.5.1(Sewing of Slings)	-	0	Repeated Clause.
4.3.1,Fig. 10(Soft Eyes)	-	0	Repeated Clause.
4.3.2(Soft Eyes)	-	0	Repeated Clause.
4.4.1(End Fittings :General)	-	0	Repeated Clause.
4.4.2(End Fittings :Material)	-	0	Repeated Clause.
4.4.3 (End Fittings :-Finish)	-	0	Repeated Clause.
4.4.4 (End Fittings :-Form)	-	0	Repeated Clause.
4.4.5 & 5.4(End Fittings :-Proof Testing)	-	0	Repeated Clause.
4.5 & 5.2(Working Load Limit)	-	0	Repeated Clause.
4.6 & A-2(Maximum Safe Working Load)	-	0	Repeated Clause.
6.1 (a)(MARKING)	-	0	Repeated Clause.
6.1 (b)(MARKING)	-	0	Repeated Clause.
6.1 (c)(MARKING)	-	0	Repeated Clause.
6.1 (d)(MARKING)	-	0	Repeated Clause.
6.1 (e)(MARKING)	-	0	Repeated Clause.
6.2(MARKING)	-	0	Repeated Clause.
4.1.1(REQUIREMENTS :-Webbing)	-	0	Repeated Clause.
4.1.2.1(Weaving)	-	0	Repeated Clause.
4.1.2.2(Weaving)	-	0	Repeated Clause.
4.1.3(Width)	-	0	Repeated Clause.
4.1.4(Thickness)	-	0	Repeated Clause.
4.1.5( Dyeing)	-	0	Repeated Clause.
4.1.6(Other Treatments, Afiertreatments or Coverings)	-	0	Repeated Clause.
4.2.1(Sewing of Slings)	-	0	Repeated Clause.
4.2.3(Sewing of Slings)	-	0	Repeated Clause.
4.2.3.1(Sewing of Slings)	-	0	Repeated Clause.
4.2.4 (Sewing of Slings)	-	0	Repeated Clause.
4.2.4.1(Sewing of Slings)	-	0	Repeated Clause.
4.2.5(Sewing of Slings)	-	0	Repeated Clause.
4.2.5.1(Sewing of Slings)	-	0	Repeated Clause.
4.3.1,Fig. 10(Soft Eyes)	-	0	Repeated Clause.
4.3.2(Soft Eyes)	-	0	Repeated Clause.
4.4.1(End Fittings :General)	-	0	Repeated Clause.
4.4.2(End Fittings :Material)	-	0	Repeated Clause.
4.4.3 (End Fittings :-Finish)	-	0	Repeated Clause.
4.4.4 (End Fittings :-Form)	-	0	Repeated Clause.
4.4.5 & 5.4(End Fittings :-Proof Testing)	-	0	Repeated Clause.
4.5 & 5.2(Working Load Limit)	-	0	Repeated Clause.
4.6 & A-2(Maximum Safe Working Load)	-	0	Repeated Clause.
6.1 (a)(MARKING)	-	0	Repeated Clause.
6.1 (b)(MARKING)	-	0	Repeated Clause.
6.1 (c)(MARKING)	-	0	Repeated Clause.
6.1 (d)(MARKING)	-	0	Repeated Clause.
6.1 (e)(MARKING)	-	0	Repeated Clause.
6.2(MARKING)	-	0	Repeated Clause.
4.2.2(Sewing of Slings)	-	0	Repeated Clause.

-
Included w.e.f 28.07.2025

4986

SHRI KRISHNA TEST HOUSE PVT LTD (142)

8185606

IS 13273 (1991)

Vitreous enamelled inner tanks for storage water heater - specification

All

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 5.3.2.1(1238)	-	30000	-
Cl. 5.3.2.1(1238)	-	30000	-
Cl. 5.3.2.3(13273)	-	30000	-
Cl 5.3.2.2(13273)	-	30000	-
Cl. 5.3.3(13273)	-	30000	-
Cl. 5.3.2.2(3972(P-2/Sec-1))	-	30000	-
Cl. 5.3.2.2(3972(P-2/Sec-1))	-	30000	-
Cl. 5.3.2.2(3972(P-2/Sec-1))	-	30000	-
Cl. 5.3.2.2(3972(P-2/Sec-1))	-	30000	-
Cl. 5.3.2.5(13273)	-	30000	-
Cl. 5.4(13273)	-	30000	-
Cl. 5.5(13273)	-	30000	-

13 May, 2028

-
-

4987

Rajkot Metlab Services LLP, Rajkot

7183706

IS 204 : Part 2 (1992)

Tower bolts - Specification: Part 2 non - Ferrous metals (Fifth Revision)

5900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4 -Table 3- i (Ref. Cl 8, Table 1 Designation 63400 of IS 1285 : 2002)(Chemical composition - Aluminium - IS 504)	-	500	-
4 -Table 3- i (Ref. Cl 8 , Table 1 Designation 63400 of IS 1285 : 2002)(Chemical composition - Copper - IS 504)	-	500	-
4 -Table 3- i (Ref. Cl 8, Table 1 Designation 63400 of IS 1285 : 2002)(Chemical composition - Magnesium - IS 504)	-	500	-
4 -Table 3- i (Ref. Cl 8, Table 1 Designation 63400 of IS 1285 : 2002)(Chemical composition - Silicon - IS 504)	-	500	-
4 -Table 3- i (Ref. Cl 8 , Table 1 Designation 63400 of IS 1285 : 2002)(Chemical composition - Iron - IS 504)	-	500	-
4 -Table 3- i (Ref. Cl 8, Table 1 Designation 63400 of IS 1285 : 2002)(Chemical composition - Manganese - IS 504)	-	500	-
4 -Table 3- i (Ref. Cl 8, Table 1 Designation 63400 of IS 1285 : 2002)(Chemical composition - Zinc - IS 504)	-	500	-
4 -Table 3- i (Ref. Cl 8 , Table 1 Designation 63400 of IS 1285 : 2002)(Chemical composition - Titanium - IS 504)	-	500	-
4 -Table 3- i (Ref. Cl 8, Table 1 Designation 63400 of IS 1285 : 2002)(Chemical composition - Chromium - IS 504)	-	500	-
4 -Table 3- i (Ref. Cl 8, Table 1 Designation 63400 of IS 1285 : 2002)(Chemical composition - others - IS 504)	-	500	-
4 -Table 3- ii (Ref. Cl 5.1, Table 1 Designation 65032 of IS 733 : 1983)(Chemical composition - Aluminium - IS 504)	-	500	-
4 -Table 3- ii (Ref. Cl 5.1 , Table 1 Designation 65032 of IS 733 : 1983)(Chemical composition - Copper - IS 504)	-	500	-
4 -Table 3- ii (Ref. Cl 5.1 , Table 1 Designation 65032 of IS 733 : 1983)(Chemical composition - Magnesium - IS 504)	-	500	-
4 -Table 3- ii (Ref. Cl 5.1, Table 1 Designation 65032 of IS 733 : 1983)(Chemical composition - Silicon - IS 504)	-	500	-
4 -Table 3- ii (Ref. Cl 5.1 , Table 1 Designation 65032 of IS 733 : 1983)(Chemical composition - Iron - IS 504)	-	500	-
4 -Table 3- ii (Ref. Cl 5.1 , Table 1 Designation 65032 of IS 733 : 1983)(Chemical composition - Manganese - IS 504)	-	500	-
4 -Table 3- ii (Ref. Cl 5.1 , Table 1 Designation 65032 of IS 733 : 1983)(Chemical composition - Zinc - IS 504)	-	500	-
4 -Table 3- ii (Ref. Cl 5.1 , Table 1 Designation 65032 of IS 733 : 1983)(Chemical composition - Titanium and or other grain refining elements - IS 504)	-	500	-
4 -Table 3- ii (Ref. Cl 5.1, Table 1 Designation 65032 of IS 733 : 1983)(Chemical composition - Chromium - IS 504)	-	500	-
4 -Table 3- iii (Ref. Cl 6.1 , Table 1 Designation CuZn40 of IS 410 : 1977)(Chemical composition - Copper - IS 3635:1966)	-	500	-
4 -Table 3- iii (Ref. Cl 6.1 , Table 1 Designation CuZn40 of IS 410 : 1977)(Chemical composition - Lead - IS 3635:1966)	-	500	-
4 -Table 3- iii (Ref. Cl 6.1, Table 1 Designation CuZn40 of IS 410 : 1977)(Chemical composition - Iron - IS 3635:1966)	-	500	-
4 -Table 3- iii (Ref. Cl 6.1, Table 1 Designation CuZn40 of IS 410 : 1977)(Chemical composition - Total impurities (including Iron) - IS 3635:1966)	-	500	-
4 -Table 3- iii (Ref. Cl 6.1, Table 1 Designation CuZn40 of IS 410 : 1977)(Chemical composition - Zinc - IS 3635:1966)	-	500	-
4 -Table 3- iv (Ref. Cl 3.1, Table 1 Grade CB-2 of IS 292 : 1983)(Chemical composition - Copper plus incidental nickel - IS 3685:1966)	-	500	-
4 -Table 3- iv (Ref. Cl 3.1, Table 1 Grade CB-2 of IS 292 : 1983)(Chemical composition - Nickel - IS 3685:1966)	-	500	-
4 -Table 3- iv (Ref. Cl 3.1, Table 1 Grade CB-2 of IS 292 : 1983)(Chemical composition - Tin - IS 3685:1966)	-	500	-
4 -Table 3- iv (Ref. Cl 3.1, Table 1 Grade CB-2 of IS 292 : 1983)(Chemical composition - Iron - IS 3685:1966)	-	500	-
4 -Table 3- iv (Ref. Cl 3.1, Table 1 Grade CB-2 of IS 292 : 1983)(Chemical composition - Aluminium - IS 3685:1966)	-	500	-
4 -Table 3- iv (Ref. Cl 3.1, Table 1 Grade CB-2 of IS 292 : 1983)(Chemical composition - Zinc - IS 3685:1966)	-	500	-
4 -Table 3- v (Ref. Cl 8.1, Table 1 Grade II of IS 319 : 1974)(Chemical composition - Copper - IS 3685:1966)	-	500	-
4 -Table 3- v (Ref. Cl 8.1, Table 1 Grade II of IS 319 : 1974)(Chemical composition - Lead - IS 3685:1966)	-	500	-
4 -Table 3- v (Ref. Cl 8.1, Table 1 Grade II of IS 319 : 1974)(Chemical composition - Iron - IS 3685:1966)	-	500	-
4 -Table 3- v (Ref. Cl 8.1, Table 1 Grade II of IS 319 : 1974)(Chemical composition - Total other impurities excluding iron - IS 3685:1966)	-	500	-
4 -Table 3- v (Ref. Cl 8.1, Table 1 Grade II of IS 319 : 1974)(Chemical composition - Zinc- IS 3685:1966)	-	500	-
4 -Table 3- vi (Ref. Cl 4.1, Table 1 Alloy ZnAl4 of IS 742 : 1981)(Chemical composition - Aluminium- IS 2600:1964)	-	500	-
4 -Table 3- vi (Ref. Cl 4.1, Table 1 Alloy ZnAl4 of IS 742 : 1981)(Chemical composition - Magnesium- IS 2600:1964)	-	500	-
4 -Table 3- vi (Ref. Cl 4.1, Table 1 Alloy ZnAl4 of IS 742 : 1981)(Chemical composition - Impurities-Copper- IS 2600:1964)	-	500	-
4 -Table 3- vi (Ref. Cl 4.1, Table 1 Alloy ZnAl4 of IS 742 : 1981)(Chemical composition - Impurities-Iron- IS 2600:1964)	-	500	-
4 -Table 3- vi (Ref. Cl 4.1, Table 1 Alloy ZnAl4 of IS 742 : 1981)(Chemical composition - Impurities-Lead- IS 2600:1964)	-	500	-
4 -Table 3- vi (Ref. Cl 4.1, Table 1 Alloy ZnAl4 of IS 742 : 1981)(Chemical composition - Impurities-Cadmium- IS 2600:1964)	-	500	-
4 -Table 3- vi (Ref. Cl 4.1, Table 1 Alloy ZnAl4 of IS 742 : 1981)(Chemical composition - Impurities-Tin- IS 2600:1964)	-	500	-
4 -Table 3- vi (Ref. Cl 4.1, Table 1 Alloy ZnAl4 of IS 742 : 1981)(Chemical composition - Impurities-Thallium and Indium- IS 2600:1964)	-	500	-
4 -Table 3- vi (Ref. Cl 4.1, Table 1 Alloy ZnAl4 of IS 742 : 1981)(Chemical composition - Impurities-Nickel- IS 2600:1964)	-	500	-
4 -Table 3- vi (Ref. Cl 4.1, Table 1 Alloy ZnAl4 of IS 742 : 1981)(Chemical composition - Zinc- IS 2600:1964)	-	500	-
5.1(General)	-	500	-
5.2.1 Table 1(Particulars-Barrel Tower Bolts)	-	500	-
5.2.2 Table 2(Particulars-Skeleton Tower Bolts)	-	500	-
6.1- Table 1(Dimension of Barrel tower bolts-1.Size 2.Length of Bolt or Barrel-(A or B) 4.Width of Barrel-C 5.Dia of Bolt-D 6.Length of Socket-E 7.Thickness of Metal of Barrel (Brass or Zink Alloy/Aluminium alloy/Sheet Brass)-F 8.Dia of bore of barrel or socket- G )	-	500	-
6.1- Table 1(Dimension of barrel tower bolts-Minimum No. of equally Spaced holes in Barrel & Socket for wooden screw no 6)	-	500	-
6.2- Table 2(Dimension of Skeleton Tower Bolts 1.Size 2.Length of Bolt -A 3.Length of Bolt Plate -B 4.Width of Bolt Plate or Staple-C 5.Dia of Bolt-D 6.Length of Staple-E 7.Thickness of Plate or Socket (Brass /Aluminium alloy or Zink Alloy)-F 8.Dia of bore of Plate or Staple-G 9.Dia of shank of Knob )	-	500	-
6.2- Table 2(Dimension of Skeleton Tower Bolts- Nos of Staples)	-	500	-
6.2- Table 2(Dimension of Skeleton Tower Bolts-Minimum No. of Screw holes for wood screw no 4)	-	500	-
6.2- Table 3(PACKING)	-	500	-
7(Finish)	-	1000	-
8(Packing)	-	100	-
9(Scale of sampling)	-	100	-
10(Marking)	-	100	-

12 Jan, 2028

-
Included w.e.f 12.11.2025

4988

ARYAVRAT TEST HOUSE PRIVATE LIMITED

5191706

IS 7887 (1992)

Mild steel wire rod for general engineering purposes - Specification (First Revision)

1 , 2 , 3, 4 , 4M , 5, 6 , 6M, 7 , 7M, 8 ,8M, 9 , 10 , 10M

5500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Workmanship)	-	200	-
Cl 9(Nominal Diameter & Out Of Shape)	-	200	-
Cl 8(Workmanship)	-	200	-
Cl 9(Nominal Diameter & Out Of Shape)	-	200	-
Cl 8(Freedom from defects)	-	200	-
Cl 9(Nominal Diameter & Out Of Shape)	-	200	-
6.1(Carbon %)	-	200	-
6.1(Manganese %)	-	200	-
6.1(Phosphorus %)	-	200	-
6.1(Sulphur %)	-	200	-
6.1(Silicon %)	-	200	-
6.1( Aluminium %)	-	200	-
6.1(Carbon %)	-	200	-
6.1(Manganese %)	-	200	-
6.1(Phosphorus %)	-	200	-
6.1(Sulphur %)	-	200	-
6.1(Silicon %)	-	200	-
6.1( Aluminium %)	-	200	-
6.1(Carbon %)	-	200	-
6.1(Manganese %)	-	200	-
6.1(Phosphorus %)	-	200	-
6.1(Sulphur %)	-	200	-
6.1(Silicon %)	-	200	-
6.1( Aluminium %)	-	200	-
Cl. 9(Out of Shape)	-	200	-
Cl 9(Nominal Diameter & Out Of Shape)	-	200	-
Cl 8(Workmanship)	-	200	-
Cl 8(Workmanship)	-	200	-
Cl 9(Nominal Diameter & Out Of Shape)	-	200	-
Table 1 Note 3(Any Instrumental Method/Chemical Method)	-	800	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	800	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	800	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	800	-
Amendment 1(By Calculation)	-	200	-
Table 1 Note 3(Any Instrumental Method/Chemical Method)	-	800	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	800	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	800	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	800	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	800	-
Amendment 1(By Calculation)	-	800	-
Table 1 Note 3(Copper)	-	200	-
Amendment 1(Niobium)	-	200	-
Amendment 1(Vanadium)	-	200	-
Amendment 1(Titanium)	-	200	-
Amendment 1(Micro Alloying Element (Nb+V+Ti))	-	800	-
9.1(Diameter - SOP-MT-23)	-	200	-
9.3(Out of Shape - SOP-MT-23)	-	200	-
11(Marking)	-	200	-
Table 1 Note 3(Copper)	-	200	-
Amendment 1(Niobium)	-	200	-
Amendment 1(Vanadium)	-	200	-
Amendment 1(Titanium)	-	200	-
Amendment 1(Micro Alloying Element (Nb+V+Ti))	-	800	-
Cl 9("1.Outer dia (08) 2.Out of shape (08)")	-	200	-
Cl 9(Avarage Outer dia (08))	-	200	-
Cl 9(Maximum Out of shape (08))	-	200	-

28 Nov, 2028

-
-

4989

Rajkot Metlab Services LLP, Rajkot

7183706

IS 204 : Part 1 (1991)

Tower bolts - Specification: Part 1 ferrous metals (Fifth Revision)

5900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4 -Table 5- i (Ref. Cl 7, Table 3, HR1 grade of IS 1079 : 2017)(Chemical composition - Carbon - IS 228)	-	500	-
4 -Table 5- i (Ref. Cl 7, Table 3, HR1 grade of IS 1079 : 2017)(Chemical composition - Manganese - IS 228)	-	500	-
4 -Table 5- i (Ref. Cl 7, Table 3, HR1 grade of IS 1079 : 2017)(Chemical composition - Phosphorus - IS 228)	-	500	-
4 -Table 5- i (Ref. Cl 7, Table 3, HR1 grade of IS 1079 : 2017)(Chemical composition - Sulphur - IS 228)	-	500	-
4 -Table 5- ii (Ref. Cl 5, Table 1, E300-C grade of IS 2062 : 2011)(Chemical composition - Carbon - IS 228)	-	500	-
4 -Table 5- ii (Ref. Cl 5, Table 1, E300-C grade of IS 2062 : 2011)(Chemical composition - Manganese - IS 228)	-	500	-
4 -Table 5- ii (Ref. Cl 5, Table 1, E300-C grade of IS 2062 : 2011)(Chemical composition - Sulphur - IS 228)	-	500	-
4 -Table 5- ii (Ref. Cl 5, Table 1, E300-C grade of IS 2062 : 2011)(Chemical composition - Phosphorus - IS 228)	-	500	-
4 -Table 5- ii (Ref. Cl 5, Table 1, E300-C grade of IS 2062 : 2011)(Chemical composition - Silicon - IS 228)	-	500	-
4 -Table 5- ii (Ref. Cl 5, Table 1, E300-C grade of IS 2062 : 2011)(Chemical composition - Carbon Equivalen(CE) - IS 228)	-	500	-
4 -Table 5- iii (Ref. Cl 6.1 of IS 210 : 2009)(Chemical composition - Sulphur and/or Phosphorous)	-	500	-
4 -Table 5- iii (Ref. Cl 9.1 of IS 210 : 2009)(The microstructure shall be substantially free of primary cementite and/ or massive stead ite and shall consist oftlake graphite in a matrix offerrite or pearlite or mixture thereof.)	-	3000	-
4 -Table 5- iii (Ref. Cl 9.1.1 of IS 210 : 2009)(Graphite structute Distribution - IS 7754)	-	3000	-
5.1(General)	-	100	-
5.2.1 Table 1(Particulars-Barrel Tower Bolts)	-	200	-
5.2.2 Table 2(Particulars-Sami Barrel Tower Bolts)	-	200	-
5.2.3 Table 3(Particulars-Riveted or Spot Welded Tower Bolts)	-	200	-
5.2.4 Table 4(Particulars-Skeleton Tower Bolts)	-	200	-
6.1- Table 1(Dimension of Barrel tower bolts-1.Size 2.Length of Bolt-A 3.Length of Barrel-B 4.Width of Barrel-C 5.Dia of Bolt-D 6.Length of Socket-E 7.Thickness of mild steel sheet for barrel-F 8.Dia of bore of barrel or socket- G )	-	200	-
6.1- Table 1(Dimension of Barrel tower bolts-Minimum No. of equally Spaced Screw holes in Barrel and Socket for wood screw no 6)	-	200	-
6.2- Table 2(Dimension of Sami Barrel Tower Bolts 1.Size 2.Length of Bolt-A 3.Length of Bolt Plate-B 4.Width of Bolt Plate-C 5.Dia of Bolt-D 6.Length of Socket-E 7.Thickness of Bolt Plate or Socket-F 8.Dia of bore of Bolt Plate or socket G )	-	200	-
6.2- Table 2(Dimension of Sami Barrel Tower Bolts-Minimum No. of equally Spaced Screw holes in Bolt Plate and Socket for wood screw no 6)	-	200	-
6.3- Table 3(Dimension of Riveted or Spot Welded Tower Bolts- 1.Size 2.Length of Bolt-A 3.Length of Bolt Plate-B 4.Width of Bolt Plate-C 5.Dia of Bolt-D 6.Length of Socket-E 7. Length of Strap-E" 8.Thickness of Back Plate -F 9.Thickness of Socket or Upper Plate and Strap- F" 10.Dia of bore of Bolt Plate or socket- G 11. Length of Alternative Socket-H )	-	200	-
6.3- Table 3(Dimension of Riveted or Spot Welded Tower Bolts-Minimum No. of equally Spaced Screw holes in Bolt Plate and Socket for wood screw no 6)	-	200	-
6.4- Table 4(Dimension of Skeleton Tower Bolts 1.Size 2.Length of Bolt-A 3.Length of Bolt Plate-B 4.Width of Bolt Plate-C 5.Dia of Bolt-D 6.Length of Staple-E 7.Thickness of Plate or Staple -F 8.Dia of bore of Plate or Staple-G 9.Dia of shank of Knob-J)	-	200	-
6.4- Table 4(Dimension of Skeleton Tower Bolts- Nos of Staples)	-	200	-
6.4- Table 4(Dimension of Skeleton Tower Bolts-Minimum No. of Screw holes for wood screw no 6)	-	200	-
8.1(MARKING- .)	-	200	-
8.1.1,(MARKING- )	-	200	-
9(PACKING)	-	200	-
7(Finish)	-	1000	-

12 Jan, 2028

-
Included w.e.f 12.09.2025

4990

Eminent International Testing Center Private Limited

6190736

IS 14900 (2018)

Transparent float glass - Specification (First Revision)

Transparent Float Glass

98775.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4.1(A glass shall be deemed to be manufactured using float glass technology if the tin side of the glass can be identified by the UV light test as prescribed in Annex A.)	-	5800.00	-
Cl.4.2 ( Annexure B Table 1)(The minimum value for visual light transmission for a flat, transparent clear float glass, when measured as per Annex B, shall be as prescribed in Table 1)	-	5800.00	-
Cl.4.3.1 (Table 2)(Float glass thickness shall be measured with micrometer or calipers, which is graduated to 0.01 mm or with a measuring instrument having an equivalent accuracy. The tolerances on thickness shall be as specified in Table 2.)	-	5800.00	-
Cl.4.3.2.1(the finished pane shall not be larger than a prescribed rectangle of dimensions (W + v, L + v), or smaller than a prescribed rectangle of dimensions (W – v, L – v), where v is the maximum tolerance on nominal dimensions. The corresponding sides of the prescribed rectangles shall be parallel to each other and these rectangles shall have a common centre (see Fig.1).)	-	5800.00	-
Cl.4.3.2.2(The length and width of the glass on cut sizes shall be measured with a steel scale (tape) which is graduated to 1 mm. The measurement shall be made on adjacent two sides. The tolerances on nominal dimensions length L, and width W, shall be ± 5mm.)	-	5800.00	-
Cl.4.3.3(The tolerances on diagonals shall be as specified in Table 3.)	-	5800.00	-
Cl.4.4 (Annex C Table 8)(The glass shall be viewed under the conditions of observation as described in Annex C, and the angle at which there is no optical distortion shall be noted. This angle shall not be less than the appropriate critical viewing angle (see Table 8).)	-	16200.00	-
Cl.4.5.1(see Table 4(Spot faults are categorized based on their size (see Table 4). Determination of spot faults shall be done in accordance with Annex D. The maximum permissible number of the different categories of spot faults shall be as per Tables 5 and 6.)	-	16200.00	-
Cl.4.5.2(Annexure E)(There shall be no reams, strings and lines distinguished visually when tested in accordance with Annex E.)	-	16200.00	-
4.3.1(Thickness)	-	5125.00	-
4.3.1(Thickness test)	-	5125.00	-
4.3.1(Thickness test)	-	5125.00	-

-
-

4991

TRUSTIN ANALYTICAL SOLUTIONS PRIVATE LIMITED, CHENNAI

6139136

IS 13422 (2024)

Single-use Sterile Rubber Surgical Gloves ï¿½ Specification (First Revision)

Type 1 &2/Size : 5.5 to 9.0/Designation: Left or Right

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(Materials)	-	250	-
Cl-6(Sampling and selection of test pieces)	-	250	-
Cl-7.1(Dimensions)	-	2000	Length, width and Thickness
Cl-7.2(Watertightness)	-	3500	Max. 500 Pcs tested
Cl-7.3(Tensile properties)	-	1000	-
Cl-7.3.1(General)	-	250	-
Cl-7.3.2(Force at break and elongation at break before accelerated ageing)	-	2000	Before ageing
Cl-7.3.3(Force at break and elongation at break after accelerated ageing)	-	3000	Accelerated ageing
Cl-7.3.4(Force required to produce 300 % elongation)	-	500	-
Cl-7.4(Sterility)	-	2000	-
Cl-9(Marking.)	-	250	-
Cl-5(Materials)	-	0	-
Cl-6(Sampling and selection of test pieces)	-	0	-
Cl-7.1(Dimensions)	-	0	-
Cl-7.2(Watertightness)	-	0	-
Cl-7.3(Tensile properties)	-	0	-
Cl-7.3.1(General)	-	0	-
Cl-7.3.2(Force at break and elongation at break before accelerated ageing)	-	0	-
Cl-7.3.3(Force at break and elongation at break after accelerated ageing)	-	0	-
Cl-7.3.4(Force required to produce 300 % elongation)	-	0	-
Cl-7.4(Sterility)	-	0	-
Cl-9(Marking.)	-	0	-

-
Included w.e.f. 13.11.2025

4992

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 2508 (2024)

Polyethylene Films and Sheets â Specification (Fourth Revision)

All

27000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.4 Sl No. (i) of Table 1, Table 2, Table 3 & Table 4.(Density - IS 13360 : Part 3 : Sec 10 : 2021)	-	750	-
5.1.6(Black Film- Carbon black - IS 2508:2024)	-	1000	-
5.1.6(Ash content - IS 2508: 2024)	-	750	-
5.1.6(carbon black dispersion - IS 2530: 1963)	-	1000	-
5.1.1(Appearance)	-	200	-
5.1.2(Film Form)	-	500	-
5.1.3(Odour)	-	500	-
5.1.5(Melt Flow Index- IS 13360 : Part 4 : Sec 1 : subsec 1 or IS 13360 : Part 4 : Sec 1 : subsec 2)	-	1500	-
5.2.1.1/ Table-1,2,3 &4(Nominal Thickness, Annex C,)	-	250	-
5.2.1.2(Nominal Width)	-	250	-
6, Type 1 (LDPE/LLDPE) /Table-1("Tensile strength at break-Machine direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	1500	-
6/Table-1("Tensile strength at break-Transverse direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	1500	-
6/Table-1("Elongation % at break, -Machine direction,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	1000	-
6/Table-1("Elongation % at break, -Transverse direction,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	1000	-
6/Table-1("Ageing test at (70 ± 1) ºC for 7 days-Machine Direction, IS 7016 (Part 8) followed by IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	2000	-
6/Table-1("Ageing test at (70 ± 1) ºC for 7 days- Transverse Direction, IS 7016 (Part 8) followed by IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	2000	-
6/Table-1(Dart impact strength,Method B of IS 13360 (Part 5/Sec 6))	-	800	-
6/Table-1(Tear resistance -Machine direction, IS 13360 (Part 5/Sec 23))	-	1000	-
6/Table-1(Tear resistance-Transverse direction, IS 13360 (Part 5/Sec 23))	-	1000	-
" 7, Type 2 (HDPE/PE) /Table-2"("Tensile strength at break-Machine direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	0	-
" 7/Table-2"("Tensile strength at break-Transverse direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	0	-
" 7/Table-2"("Elongation % at break, -Machine direction,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	0	-
" 7/Table-2"("Elongation % at break, -Transverse direction,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	0	-
" 7/Table-2"("Ageing test at (70 ± 1) ºC for 7 days-Machine Direction, IS 7016 (Part 8) followed by IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
" 7/Table-2"("Ageing test at (70 ± 1) ºC for 7 days- Transverse Direction, IS 7016 (Part 8) followed by IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
" 7/Table-2"(Dart impact strength,Method B of IS 13360 (Part 5/Sec 6))	-	0	-
8, Type 3 (LDPE/LLDPE, PE) /Table-3("Average Tensile Break strength- Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
8/Table-3("Average Tensile Break strength- Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
8/Table-3("Average Tensile Break Elongation %-Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
8/Table-3("Average Tensile Break Elongation %-Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
8/Table-3(Average Tear resistance, IS 2508: 2024 Annex-D)	-	0	-
8/Table-3(Average Puncture resistance, IS 2508: 2024 Annex-E)	-	1000	-
9, Type 4 (HDPE/PE) /Table-4("Average Yield strength- Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1500	-
9/Table-4("Average Yield strength- Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1500	-
9/Table-4("Average Tensile Break strength- Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
9/Table-4("Average Tensile Break strength- Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
9/Table-4("Average Tensile yield Elongation %-Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1000	-
9/Table-4("Average Tensile yield Elongation %-Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1000	-
9/Table-4(Average Tensile Break Elongation %-Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3))	-	0	-
9/Table-4(Average Tensile Break Elongation -Transverse Direction, IS 13360 (Part 5/Sec 1) and S 13360 (Part 5/Sec 3))	-	0	-
9/Table-4(Average Tear resistance, IS 2508: 2024 Annex-D)	-	0	-
5.1.4 Sl No. (i) of Table 1, Table 2, Table 3 & Table 4.(Density - IS 13360 : Part 3 : Sec 10 : 2021)	-	0	-
5.1.6(Black Film- Carbon black - IS 2508:2024)	-	0	-
5.1.6(Ash content - IS 2508: 2024)	-	0	-
5.1.6(carbon black dispersion - IS 2530: 1963)	-	0	-
5.1.1(Appearance)	-	0	-
5.1.2(Film Form)	-	0	-
5.1.3(Odour)	-	0	-
5.1.5(Melt Flow Index- IS 13360 : Part 4 : Sec 1 : subsec 1 or IS 13360 : Part 4 : Sec 1 : subsec 2)	-	0	-
5.2.1.1/ Table-1,2,3 &4(Nominal Thickness, Annex C,)	-	0	-
5.2.1.2(Nominal Width)	-	0	-
6, Type 1 (LDPE/LLDPE) /Table-1("Tensile strength at break-Machine direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	0	-
6/Table-1("Tensile strength at break-Transverse direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	0	-
6/Table-1("Elongation % at break, -Machine direction,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	0	-
6/Table-1("Elongation % at break, -Transverse direction,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	0	-
6/Table-1("Ageing test at (70 ± 1) ºC for 7 days-Machine Direction, IS 7016 (Part 8) followed by IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
6/Table-1("Ageing test at (70 ± 1) ºC for 7 days- Transverse Direction, IS 7016 (Part 8) followed by IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
6/Table-1(Dart impact strength,Method B of IS 13360 (Part 5/Sec 6))	-	0	-
6/Table-1(Tear resistance -Machine direction, IS 13360 (Part 5/Sec 23))	-	0	-
6/Table-1(Tear resistance-Transverse direction, IS 13360 (Part 5/Sec 23))	-	0	-
" 7, Type 2 (HDPE/PE) /Table-2"("Tensile strength at break-Machine direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	0	-
" 7/Table-2"("Tensile strength at break-Transverse direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	0	-
" 7/Table-2"("Elongation % at break, -Machine direction,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	0	-
" 7/Table-2"("Elongation % at break, -Transverse direction,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	0	-
" 7/Table-2"("Ageing test at (70 ± 1) ºC for 7 days-Machine Direction, IS 7016 (Part 8) followed by IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
" 7/Table-2"("Ageing test at (70 ± 1) ºC for 7 days- Transverse Direction, IS 7016 (Part 8) followed by IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
" 7/Table-2"(Dart impact strength,Method B of IS 13360 (Part 5/Sec 6))	-	0	-
8, Type 3 (LDPE/LLDPE, PE) /Table-3("Average Tensile Break strength- Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
8/Table-3("Average Tensile Break strength- Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
8/Table-3("Average Tensile Break Elongation %-Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
8/Table-3("Average Tensile Break Elongation %-Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
8/Table-3(Average Tear resistance, IS 2508: 2024 Annex-D)	-	0	-
8/Table-3(Average Puncture resistance, IS 2508: 2024 Annex-E)	-	0	-
9, Type 4 (HDPE/PE) /Table-4("Average Yield strength- Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
9/Table-4("Average Yield strength- Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
9/Table-4("Average Tensile Break strength- Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
9/Table-4("Average Tensile Break strength- Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
9/Table-4("Average Tensile yield Elongation %-Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
9/Table-4("Average Tensile yield Elongation %-Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
9/Table-4(Average Tensile Break Elongation %-Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3))	-	0	-
9/Table-4(Average Tensile Break Elongation -Transverse Direction, IS 13360 (Part 5/Sec 1) and S 13360 (Part 5/Sec 3))	-	0	-
9/Table-4(Average Tear resistance, IS 2508: 2024 Annex-D)	-	0	-
Cl-4.2.3.1.4 (b)(Toluene Extract)	-	1500	-
Cl-4.2.3.1.4 (c)(Volatile Matter, Max)	-	1000	-
Cl-4.2.3.1.4 (d)(Carbon Black Particle Size)	-	0	-
Cl-4.2.3.1.4 (a)(Density)	-	0	-

-
Included w.e.f 16.12.2025 Exclusion: Cl-4.2.3.1.4 (e) (Tint Strength)

4993

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

9135626

IS 17550 : Part 3 (2025)

Household Refrigerating Appliances - Characteristics and Methods Of Test Part 3 Energy Consumption and Volume (First Revision)

Household Refrigerating Appliances

155000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.1, Annex A(set up for energy consumption)	-	25000	-
Clause 4.2, Annex B(Steady state power consumption)	-	25000	-
Clause 4.3, Annex C(Defrost and Recovery Energy and Temperature Change)	-	25000	-
Clause 4.4, Annex D(Defrost Frequency)	-	20500	-
Clause 4.5, Annex E(Number of Test Points and Interpolation)	-	17500	-
Clause 4.6, Annex G(Load Processing Efficiency)	-	17500	-
Clause 4.7, Annex F(Specified Auxiliaries)	-	17500	-
Clause 4.8, Annex H(Volume determination)	-	9500	-
Clause 4.8.1, Annex H(Rated total volume)	-	9500	-
Clause 5, 5.1, 5.2 Table 1(TARGET TEMPERATURES FOR ENERGY DETERMINATION)	-	0	-
Clause 6, 6.1 to 6.8(DETERMINATION OF ENERGY CONSUMPTION)	-	25000	-

19 Mar, 2029

-
Included w.e.f.22.07.2025

4994

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 884 (2025)

First-Aid Hose-Reel for Fire Fighting - Specification (Second Revision)

ALL

26800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4(Dimensions)	-	1000	-
Cl. 7(PERFORMANCE REQUIREMENT)	-	5000	For (1). Cl. No. 7.1 (HPT) - 2500 & (2). Cl. No 7.2 (Resistance to Leakage )-2500
Cl. 7.1(Hydrostatic pressure test)	-	2500	-
Cl. 7.2(Resistance to leakage)	-	2500	-
Cl. 7.3(Strength)	-	9000	For (1) Cl. No. 7.3.1(Impact Resistance Test -4500 & (2) Cl. No. 7.3.3(Load Resistance Test) -4500
Cl. 7.3.1(Impact resistance test)	-	4500	-
Cl. 7.3.2(Load Resistance Test)	-	4500	-
Cl. 7.4(Range and Water flow rate)	-	3500	-
Cl. 7.5(Swinging Arrangement)	-	1000	-
Cl. 7.6(Reel Action)	-	100	-
Cl. 8(WORKMANSHIP AND FINISH)	-	500	-
Cl. 8.2(Painting)	-	500	-
Cl. 7.7(Resistance to impact test for nozzle)	-	1000	-
Cl. 7.8("Ageing test for plastic made nozzle")	-	4000	-
Cl. 7.9("Resistance to external corrosion test")	-	5500	-
Cl. 5(MATERIAL)	-	1000	-
Cl. 6(CONSTRUCTION)	-	1000	-
Cl. 9(CRITERIA FOR CONFORMITY)	-	500	-
Cl. 10(MARKING)	-	0	-

08 Feb, 2027

-
-

4995

Samridhi Test House Pvt. Ltd.

8184706

IS 3315 (2024)

Direct Evaporative Air Cooler â Specification (Fourth Revision)

39500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Enclosure)	-	200	-
Cl-5.2(Filter Pads)	-	100	-
Cl-5.3(Sump Tank Capacities)	-	1500	-
Cl-5.4(Blower/Fan)	-	500	-
Cl-5.4.3(Fan motor)	-	1500	-
Cl-5.5(Pump Set)	-	1500	-
Cl-5.6.1(Electrical wiring and connection)	-	500	-
Cl-5.6.2(Suitable power cable)	-	900	-
Cl-5.7(Switches)	-	1900	-
Cl-6(Rating Requirement)	-	1900	-
Cl-8.1(Performance Requirement)	-	1900	-
Cl-8.2(Sound Test)	-	1500	-
Cl-8.3(Air Delivery (Air Flow) Test)	-	1500	-
Cl-8.4(Cooling Efficiency Test)	-	3900	-
Cl-8.5(Power Consumption)	-	1900	-
Cl-8.6(EER Calculation Method)	-	900	-
Cl-8.7(Drop Test)	-	1900	-
Cl-8.8(Air Cooler Blower/Fan Reliability Test)	-	1500	-
Cl-12.2.1(General Running Tests)	-	2000	-
Cl-12.2.2(Protection against Electric Shock)	-	900	-
Cl-12.2.3(High Voltage Tests)	-	1900	-
Cl-12.2.4(Leakage Current)	-	900	-
Cl-12.2.5(Provision for Earthing)	-	900	-
Cl-12.2.6(Finish)	-	900	-
Cl-13(Additional Requirement for ECO-Mark)	-	1900	-
Cl-14(Storage)	-	3900	-
Cl-5.1(Enclosure)	-	0	-
Cl-5.2(Filter Pads)	-	0	-
Cl-5.3(Sump Tank Capacities)	-	0	-
Cl-5.4(Blower/Fan)	-	0	-
Cl-5.4.3(Fan motor)	-	0	-
Cl-5.5(Pump Set)	-	0	-
Cl-5.6.1(Electrical wiring and connection)	-	0	-
Cl-5.6.2(Suitable power cable)	-	0	-
Cl-5.7(Switches)	-	0	-
Cl-6(Rating Requirement)	-	0	-
Cl-8.1(Performance Requirement)	-	0	-
Cl-8.2(Sound Test)	-	0	-
Cl-8.3(Air Delivery (Air Flow) Test)	-	0	-
Cl-8.4(Cooling Efficiency Test)	-	0	-
Cl-8.5(Power Consumption)	-	0	-
Cl-8.6(EER Calculation Method)	-	0	-
Cl-8.7(Drop Test)	-	0	-
Cl-8.8(Air Cooler Blower/Fan Reliability Test)	-	0	-
Cl-12.2.1(General Running Tests)	-	0	-
Cl-12.2.2(Protection against Electric Shock)	-	0	-
Cl-12.2.3(High Voltage Tests)	-	0	-
Cl-12.2.4(Leakage Current)	-	0	-
Cl-12.2.5(Provision for Earthing)	-	0	-
Cl-12.2.6(Finish)	-	0	-
Cl-13(Additional Requirement for ECO-Mark)	-	0	-
Cl-14(Storage)	-	0	-

-
Included w.e.f 11.09.2025

4996

Eminent International Testing Center Private Limited

6190736

IS 18648 (2024)

Classification and Performance Requirements for Doors Windows and Sliders - Specification

Classification and Performance Requirements for Doors, Windows and Sliders

789500.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 7.3(Doors, Windows and Sliders)	-	78750.00	-
As per Clause 7.3(Doors, Windows and Sliders)	-	78750.00	-
As per Clause 7.4.2(Doors, Windows and Sliders)	-	78750.00	-
As per Clause 7.4.3(Doors, Windows and Sliders)	-	78750.00	-
As per Clause 7.4.4(Doors, Windows and Sliders)	-	78750.00	-
As per Clause 7.5(Doors, Windows and Sliders)	-	383250.00	-
As per Clause 6.1.6(Doors, Windows and Sliders)	-	12500	-

-
For grade O only

4997

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

9135626

IS 17681 (2022)

Specification for Bottled water dispensers

Bottled Water Dispensers

230000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Construction)	-	1000	-
4.1(General Design)	-	1000	-
4.2(Materials)	-	1000	-
4.3(Finish)	-	1000	-
4.5(Hardware)	-	1000	-
4.6(Disposal of Waste Water)	-	1000	-
4.7(Hot Water Tank)	-	1000	-
4.8(Hermetically Sealed Compressor)	-	1000	-
4.9(Protective Guards)	-	1000	-
5(Refrigeration System)	-	1000	-
5.1(Pipes and Connections/Fitting)	-	1000	-
5.2(Control of Operation)	-	1000	-
6.1(General)	-	12500	-
6.1(Protection against electric shock (Cl. 8 of IS 302-2-24))	-	12500	-
6.1(Power Input & Current (Cl. 10 of IS 302-2-24))	-	12500	-
6.1(Temperature Rise/ Heating (Cl. 11 of IS 302-2-24))	-	12500	-
6.1("Insulation Resistance and Electric Strength/ Leakage Current and Electric Strength (Cl. 13 of IS 302-2-24)")	-	12500	-
6.1("Moisture Resistance (Cl. 15 of IS 302-2-24)")	-	12500	-
6.1("Insulation resistance and electric strength (After humidity treatment) (Cl. 16 of IS 302-2-24)")	-	12500	-
6.1("Provision For Earthing (Cl. 27 of IS 302-2-24)")	-	12500	-
6.1("Screws & Connections (Cl. 28 of IS 302-2-24)")	-	12500	-
6.2(Electrical Accessories)	-	1000	-
6.3(Salt Mist Test)	-	21000	-
7(Sound pressure level)	-	12500	-
10.1(Cooling Capacity Test)	-	22500	-
10.2(Maximum Operating Condition Test (Environmental))	-	22500	-
10.3(Maximum Operating Condition Test (Voltage))	-	17500	-
10.4(Heating Capacity Test)	-	27500	-
10.5(Annual Energy Consumption Test)	-	27500	-
10.6(Freeze-up Test)	-	27500	-
10.7(Door Opening and Closing Test)	-	17500	-
10.8(Door Seal Test)	-	5000	-
10.9(Pull-down Test)	-	10000	-
11(Marking and instruction)	-	2500	-
4.4(Thermal Insulation)	-	1000	-

19 Mar, 2029

-
Included w.e.f.22.07.2025

4998

ARYAVRAT TEST HOUSE PRIVATE LIMITED

5191706

IS 14255 (1995)

Aertal bunched cables - For working voltages up to and including 1100 Volts - Specification

XLPE / PE insulated Three / Single Phase Conductor With / Without Insulated Neutral Conductor and With/ Without Street Lighting Conductor with Nominal Cross Sectional Areas of Phase Conductor Upto and Including 95 mm²

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Phase/Street Lighting conductor)	-	250	-
4.2(Messenger (Neutral Conductor or Otherwise))	-	2000	-
5.1(Insulation)	-	750	-
6.1(Flexibility class)	-	100	-
6.2(Compactness)	-	100	-
6.2(No of strands)	-	100	-
6.2(Surface)	-	100	-
6.3(Protective barrier)	-	100	-
6.4(size of street lighting conductor)	-	250	-
6.5(Size of messenger conductor )	-	250	-
6.6(Joints in messenger conductor )	-	100	-
6.6(Direction of outer layer)	-	100	-
7.1(Insulation)	-	750	-
7.2( Thickness of insulation)	-	250	-
7.3(Tolerance on thickness of insulation )	-	250	-
7.4(Aplication of the insulation )	-	100	-
7.5(Colour of the insulation )	-	100	-
8.1(Core identification)	-	100	-
8.2(Core identification)	-	100	-
8.3(Identification by other means)	-	100	-
9.1(Assembly (Laying up))	-	250	-
9.2(Assembly (Laying up))	-	250	-
9.3(Direction of lay)	-	100	-
10.1 a) i)(Tests on phase/street light conductor: tensile test - Test method IS10810:Part 2)	-	250	-
10.1 a) ii)(Wrapping test - 10810: Part 3)	-	250	-
10.1 a) iii)(Resistance test - IS10810: Part 5)	-	500	-
10.1 b) i)(Test on messenger conductor: Breaking load - IS 10810: Part 2)	-	1000	-
10.1 b) ii)(Test on messenger conductor: Elongation test - Cl 11.3)	-	250	-
10.1 b) iii)(Test on messenger conductor: Resistance test - IS 10810: Part 5)	-	500	-
10.1 c) i)(Physical tests for XLPE Insulation: Tensile strength - IS 10810: Part 7)	-	250	-
10.1 c) i)(Physical tests for XLPE Insulation: elongation at break - IS 10810: part 7)	-	250	-
10.1 c) ii)(Ageing in air oven : Tensile strength variation - IS 10810:Part 11)	-	1000	-
10.1 c) ii)(Ageing in air oven : Elongation variation- IS 10810: Part 11)	-	1000	-
10.1 c) iii)(Hot set test: Elongation under load - IS 10810: Part 30)	-	750	-
10.1 c) iii)(Hot set test: Permanent elongation (set) after cooling - IS 10810: Part 30)	-	500	-
10.1 c) iv)(Shrinkage test : Shrinkage - 10810:Part 12)	-	500	-
10.1 c) iv)(Shrinkage test : Crack Observed - 10810:Part 12)	-	200	-
10.1 c) v)(Water ahsorption (Gravimetric) - IS 10810: Part 33 )	-	2500	-
10.1 d) i)(Physical test for PE insulation: Tensile strength - IS 10810: Part 7 )	-	250	-
10.1 d) i)(Physical test for PE insulation: elongation at break - IS 10810: Part 7)	-	250	-
10.1 d) ii)(Melt flow index- IS 10810: Part 23)	-	500	-
10.1 d) iv)(Vicat softening point -IS 10810: Part 22)	-	1000	-
10.1 d) v)(Environmental stress cracking -IS 10810:Part29)	-	1000	-
10.1 f)(Insulation resistance (Volume resistivity) test a) volume resistivity at 27°C - IS 10810: Part 43)	-	500	-
10.1 f)(Insulation resistance (Volume resistivity) test b) volume resistivity at 70°C - IS 10810: Part 43)	-	500	-
10.1 g)(High voltage test - IS10810:Part 45)	-	1000	-
11.4(Bending Test on the Completed Cable ( Optional) )	-	500	-
11.4(Bending Test on the Completed Cable ( Optional))	-	250	-
10.1 d) iii)(Carbon Black Content)	-	1000	-
6.1(Construction of phase conductor)	-	100	-
6.1(Number of wires (phase conductor))	-	100	-
6.1(Construction of Street Lighting conductor)	-	100	-
6.1(Number of wires (Street Lighting conductor))	-	100	-
12.1(Manufacturer's Identification)	-	100	-
12.2(Cable Identification)	-	100	-

28 Nov, 2028

-
-

4999

DELHI TEST HOUSE, Azadhpur

8131406

IS 16240 (2023)

REVERSE OSMOSIS RO BASED POINT-OF-USE POU WATER TREATMENT SYSTEM FOR DRINKING PURPOSES SPECIFICATION first revision

77000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Overall migration limits)	-	5500	-
Cl-6.7(Pressure Test (Hydrostatic Test) — Type Test)	-	3500	-
Cl-6.8.2(Full Device Leakage Testing)	-	3500	-
Cl-6.3.2.1, 6.3.3.1 and B-1.2,Table 1, sl.no-i(Arsenic)	-	750	-
Cl-6.3.1(TDS Reduction)	-	750	-
Cl-6.3.2.1, 6.3.3.1 and B-1.2,Table 1, sl.no-ii(Cadmium)	-	750	-
Cl-6.3.2.1, 6.3.3.1 and B-1.2,Table 1, sl.no-iii(Chromium)	-	750	-
Cl-6.3.2.1, 6.3.3.1 and B-1.2,Table 1, sl.no-iv(Copper)	-	750	-
Cl-6.3.2.1, 6.3.3.1 and B-1.2,Table 1, sl.no-v(Fluoride)	-	750	-
Cl-6.3.2.1, 6.3.3.1 and B-1.2,Table 1, sl.no-vi(Lead)	-	750	-
Cl-6.3.2.1, 6.3.3.1 and B-1.2,Table 1, sl.no-vii(Mercury)	-	750	-
Cl-6.3.2.1, 6.3.3.1 and B-1.2,Table 1, sl.no-viii(Nitrate)	-	750	-
Cl-6.3.2.1, 6.3.3.1 and B-1.2,Table 1, sl.no-ix(Pesticides total)	-	10000	-
Cl-6.3.2.1, 6.3.3.1 and B-1.2,Table 1, sl.no-x(E. coli)	-	10000	-
Cl-6.4(Percent Recovery of Product Water and Hourly Production Rate)	-	2500	-
Cl-6.5.1(Excessive Leakage Current)	-	3500	-
Cl-6.5.2(High Voltage Test)	-	3500	-
Cl-6.5.3(Provision For Earthing)	-	3500	-
Cl-6.3.2.1, 6.3.3.1 and B-1.2,Table 1, sl.no-xi(MS-2 Coliphage (Virus))	-	20000	-
Cl-6.6(Power supply)	-	500	-
Cl-6.8.1(Routine Pressure Test (Pneumatic Test))	-	3500	-
Cl-5.1(Overall migration limits)	-	0	-
Cl-6.7(Pressure Test (Hydrostatic Test) — Type Test)	-	0	-
Cl-6.8.2(Full Device Leakage Testing)	-	0	-
Cl-6.3.2.1, 6.3.3.1 and B-1.2,Table 1, sl.no-i(Arsenic)	-	0	-
Cl-6.3.1(TDS Reduction)	-	0	-
Cl-6.3.2.1, 6.3.3.1 and B-1.2,Table 1, sl.no-ii(Cadmium)	-	0	-
Cl-6.3.2.1, 6.3.3.1 and B-1.2,Table 1, sl.no-iii(Chromium)	-	0	-
Cl-6.3.2.1, 6.3.3.1 and B-1.2,Table 1, sl.no-iv(Copper)	-	0	-
Cl-6.3.2.1, 6.3.3.1 and B-1.2,Table 1, sl.no-v(Fluoride)	-	0	-
Cl-6.3.2.1, 6.3.3.1 and B-1.2,Table 1, sl.no-vi(Lead)	-	0	-
Cl-6.3.2.1, 6.3.3.1 and B-1.2,Table 1, sl.no-vii(Mercury)	-	0	-
Cl-6.3.2.1, 6.3.3.1 and B-1.2,Table 1, sl.no-viii(Nitrate)	-	0	-
Cl-6.3.2.1, 6.3.3.1 and B-1.2,Table 1, sl.no-ix(Pesticides total)	-	0	-
Cl-6.3.2.1, 6.3.3.1 and B-1.2,Table 1, sl.no-x(E. coli)	-	0	-
Cl-6.4(Percent Recovery of Product Water and Hourly Production Rate)	-	0	-
Cl-6.5.1(Excessive Leakage Current)	-	0	-
Cl-6.5.2(High Voltage Test)	-	0	-
Cl-6.5.3(Provision For Earthing)	-	0	-
Cl-6.3.2.1, 6.3.3.1 and B-1.2,Table 1, sl.no-xi(MS-2 Coliphage (Virus))	-	0	-
Cl-6.6(Power supply)	-	0	-
Cl-6.8.1(Routine Pressure Test (Pneumatic Test))	-	-	-

17 Jun, 2027

-
Included w.e.f 04.11.2025 Exclusion: Cl-6.3.3.2.1,Table 2,sl.no-i (Cryptosporidium parvum), Cl-6.3.3.2.1,Table 2,sl.no-ii (Giardia lamblia)

5000

Eminent International Testing Center Private Limited

6190736

IS 17346 (2020)

Insulating Glazing Unit ” Specification

Insulting Glazing Unit

10325.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1.2(Thickness test)	-	5125.00		Testing Charges for Thickness Test
5.1.1(Dimension and Squarenes test)	-	5200.00		Combined Testing Charges for Dimension and Squareness

-
a) 5.2.1 - Dew/Frost Point Measurement b) 5.2.2 - Climate Test (Optional) c) Inert Gas Level Test (Optional)

5001

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

9135626

IS 7872 (2020)

Deep Freezers - Specification ( Second Revision )

Deep Freezers

162500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.2.12(Temperature rise test)	-	10000	-
10.2.11(Measurement )	-	0	-
10.2.10.1(Test packages and life time)	-	0	-
10.2.10(Full load test)	-	0	-
10.2.8(Earth resistance test )	-	0	-
10.2.7(Leakage current test )	-	0	-
10.2.6(Insulation resistance test)	-	0	-
10.2.5(High voltage test)	-	0	-
10.2.3(Thermal insulation test )	-	5000	-
10.2.2(Machanical strength of shelves and similar components)	-	4000	-
10.2.1(Door seal test )	-	4000	-
9.2.2(Power consumption & percentage running time)	-	0	-
9.2.1(Pull down time)	-	10000	-
9.1(No load test)	-	0	-
6.11(Volume measurement Water fill method)	-	0	-
6(Measurement of freezer storage capacity)	-	7500	-
5.1(Sound level)	-	5000	-
5.6(External surface condensation test)	-	5000	-
5.5(Strength Pressure test for components)	-	5000	-
4.8(Doors & Fittings)	-	5000	-
13(Marking and Instruction)	-	1000	-
11.7(Pressure Test)	-	5000	-
11.6(Thermal Insulation Test ( External Condensation))	-	5000	-
11.5(Mechanical Strength of Shelves and Similar Components)	-	4000	-
11.4(Door Seal Test)	-	4000	-
11.3(Temperature Rise Test)	-	10000	-
11.2(Energy Consumption Test)	-	22500	-
11.1(No load Pull down Test)	-	10000	-
8(Freezer Storage Capacity)	-	7500	-
7(Sound Pressure Level)	-	5000	-
6(Safety Requirements)	-	10000	-
5.4.4(Fatigue Test)	-	5000	-
5.4.3(Individual Strength - Pressure Test)	-	5000	-
5.4.2(Individual Strength - Pressure Test)	-	5000	-
4.8(Door and Fittings)	-	5000	-
13(Marking and Instruction)	-	1000	-
11.7(Pressure Test)	-	5000	-
11.6(Thermal Insulation Test ( External Condensation))	-	5000	-
11.5(Mechanical Strength of Shelves and Similar Components)	-	4000	-
11.4(Door Seal Test)	-	4000	-
11.3(Temperature Rise Test)	-	10000	-
11.2(Energy Consumption Test)	-	22500	-
11.1(No load Pull down Test)	-	10000	-
8(Freezer Storage Capacity)	-	7500	-
7(Sound Pressure Level)	-	5000	-
6(Safety Requirements)	-	71000	-
5.4.4(Fatigue Test)	-	5000	-
5.4.3(Individual Strength - Pressure Test)	-	5000	-
5.4.2(Individual Strength - Pressure Test)	-	5000	-
4.8(Door and Fittings)	-	5000	-
5(Refrigeration system)	-	5000	-
Cl-4.1(General Design)	-	5000	-
Cl-4.2(Materials)	-	5000	-
Cl-4.3(Finish)	-	5000	-
Cl-4.4(Thermal Insulation)	-	4000	-
Cl-4.5(Fittings)	-	5000	-
Cl-4.6(Hardware)	-	5000	-
Cl-4.7(Interior Fittings)	-	5000	-
Cl-4.8(Doors and Fittings)	-	5000	-
Cl-4.9(Disposal of Defrost / Condensate Water)	-	5000	-
Cl-5.1(Construction)	-	5000	-
Cl-5.2(Control of Operation)	-	5000	-
Cl-5.3(Location of Components)	-	5000	-
6.5(For flammable refrigerant the units should comply with IS/IEC 60335-2-89)	-	500	-
6.2(The compressor shall comply with the requirements of IS 10617)	-	500	-

19 Mar, 2029

-
Included w.e.f.22.07.2025

5002

BIS, Central Laboratory (CL)

None

IS 21 (2025)

Wrought Aluminium and Aluminium Alloys for Manufacture of Utensils - Specification (Fifth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5.1 (Material)	-
Cl-5.2 (Chemical composition and mechanical properties of grades in Cl 5.1)	-
Cl-5.3.1 a ("Wrought Aluminium (with Minimum 99 Percent Al Content)- Iron+ Silicon")	-
Cl-5.3.1 b ("Wrought Aluminium (with Minimum 99 Percent Al Content)- Chromium")	-
Cl-5.3.1 b ("Wrought Aluminium (with Minimum 99 Percent Al Content)- Magnesium")	-
Cl-5.3.1 b ("Wrought Aluminium (with Minimum 99 Percent Al Content)- Manganese")	-
Cl-5.3.1 b ("Wrought Aluminium (with Minimum 99 Percent Al Content)- Nickel")	-
Cl-5.3.1 b ("Wrought Aluminium (with Minimum 99 Percent Al Content)- Zinc")	-
Cl-5.3.1 b ("Wrought Aluminium (with Minimum 99 Percent Al Content)- Titanium")	-
Cl-5.3.1 b ("Wrought Aluminium (with Minimum 99 Percent Al Content)- Tin")	-
Cl-5.3.1 c ("Wrought Aluminium (with Minimum 99 Percent Al Content)- Copper")	-
Cl-5.3.1 Note 1 ("Wrought Aluminium (with Minimum 99 Percent Al Content)- Aluminium")	-
Cl-5.3.1 d ("Wrought Aluminium (with Minimum 99 Percent Al Content)- Others")	-
Cl-5.3.2, Table-1 (i) (Wrought Aluminium Alloys-Silicon)	-
Cl-5.3.2, Table-1 (ii) (Wrought Aluminium Alloys-Iron)	-
Cl-5.3.2, Table-1 (iii) (Wrought Aluminium Alloys-Copper)	-
Cl-5.3.2, Table-1 (iv) (Wrought Aluminium Alloys-Manganese)	-
Cl-5.3.2, Table-1 (v) (Wrought Aluminium Alloys-Magnesium)	-
Cl-5.3.2, Table-1 (vi) (Wrought Aluminium Alloys-Chromium)	-
Cl-5.3.2, Table-1 (vii) (Wrought Aluminium Alloys-Nickel)	-
Cl-5.3.2, Table-1 (viii) (Wrought Aluminium Alloys-Zinc)	-
Cl-5.3.2, Table-1 (ix) (Wrought Aluminium Alloys -Zirconium)	-
Cl-5.3.2, Table-1 (x) (Wrought Aluminium Alloys - Titanium)	-
Cl-5.3.2, Table-1 (Note 3) (Wrought Aluminium Alloys- Aluminium)	-
Cl-5.3.2, Table-1 (xi) (Wrought Aluminium Alloys- Others)	-
Cl 5.4 (Lead)	-
Cl 5.4 (Cadmium)	-
Cl 5.4 (Arsenic)	-
Cl-7 (Dimension)	-
Cl-8 (EARING TEST (OPTIONAL TEST))	-
Cl-5.2, (Cl-8,Table 2 of IS 737) (0.2% Proof Stress)	-
Cl-5.2, (Cl-8,Table 2 of IS 737) (Tensile Strength)	-
Cl-5.2, (Cl-8,Table 2 of IS 737) (Elongation)	-
Cl-5.2, (Cl-8,Table 2 of IS 737) (Bend Test)	-

-
-

5003

BIS, Central Laboratory (CL)

None

IS 4351 (2024)

Steel Frames for Doors - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5, Table-1 (i) (Mild steel sheet (cold rolled))	-
Cl-5, Table-1 (ii) (Galvanized sheets — Plain grade)	-
Cl-5, Table-1 (iii) (Stainless steel Grade)	-
Cl-5, Table-1 (iv) (Pre-painted galvanized steel sheets)	-

-
-

5004

Eminent International Testing Center Private Limited

6190736

IS 2553 : Part 1 (2018)

Safety glass - Specification: Part 1 architectural, building and general uses (Fourth Revision)

Toughened Glass

66100.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.1 (Thickness -IS 17004 & IS 14900)	-	5125.00	Testing Charges for Thickness Measurement
5.2.2.1( Dimensions- Width )	-	5200.00	Testing Charges for Dimensions - width measurement
5.2.2.1( Dimensions- Length)	-	5200.00	Testing Charges for Dimensions - length measurement
5.2.2.2( Squareness)	-	5200.00	Combined Testing Charges for Dimension and Squareness
5.2.3 (Fragmentation Test- IS 17004)	-	6150.00	Testing Charges for Fragmentation Test
5.2.4-a( Flatness-Overall bow-IS 17004)	-	6350.00	Combined Testing Charges for Flatness test
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	6550.00	Combined Testing Charges for Flatness test
5.2.4-c( Flatness-Edge lift-IS 17006)	-	6550.00	Combined Testing Charges for Flatness test
5.2.4-d( Flatness-Local distortion-IS 17007)	-	6550.00	Combined Testing Charges for Flatness test
5.2.6( Surface Compression (Optional)- IS 17004)	-	6825.00	Testing Charges for Surface Compression Test
5.1.1(General)	-	1200	-
5.2.7(Four point bending)	-	5200	-

-
-

5005

BIS, Central Laboratory (CL)

None

IS 266 (2024)

Sulphuric Acid âSpecification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1, 4.1.1 (Technical Grade (Description))	-
4.1, 4.1.2 (Battery Grade (Concentrated) (Description))	-
4.1, 4.1.2 (Battery Grade (Dilute) (Description))	-
4.1, 4.1.3 (Chemically Pure Grade (Description))	-
4.1, 4.1.3 (Analytical Reagent Grade (Description))	-
4.3.1 & Table 1, S.No (i) ("Total acidity (as H2SO4) (Technical Grade)")	-
4.3.1 & Table 1, S.No (ii) ("Residue on ignition (Technical Grade)")	-
4.3.1 & Table 1, S.No (iii) ("Iron (as Fe) (Technical Grade)")	-
4.3.1 & Table 1, S.No (v) ("Heavy metals (as lead) (Technical Grade)")	-
4.3.1 & Table 1, S.No (vi) ("Arsenic (as As) (Technical Grade)")	-
4.3.2 & Table 1, S.No (i) ("Total acidity (as H2SO4) (Battery Grade Concentrated)")	-
4.3.2 & Table 1, S.No (ii) ("Residue on ignition (Battery Grade Concentrated)")	-
4.3.2 & Table 1, S.No (iii) ("Iron (as Fe) (Battery Grade Concentrated)")	-
Cl-4.2, Table-1 (xv) (Nitrates, nitrites and ammonia (as N), percent by mass, Max)	-
Cl-4.2, Table-1 (x) (Ammonia (as NH3), ppm, Max)	-
4.3.2 & Table 1, S.No (vii) ("Oxidizable impurities (as SO2), (Battery Grade Concentrated)")	-
4.3.2 & Table 1, S.No (viii) ("Organic Matter (Battery Grade Concentrated)")	-
4.1.3 & Table 1, S.No (iv) ("Chloride (Analytical Reagent Grade)")	-

-
-

5006

BIS, Central Laboratory (CL)

None

IS 2558 (2024)

Ponceau 4R, food grade - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2 and 7 Table 1 (i) (Total dye content - IS 2558:2024)	-
3.2 and 7 Table 1 (ii) (Loss on drying at 135° C and Chlorides and sulphates - IS 1699: 1995)	-
3.2 and 7 Table 1 (iii) (Water Insoluble Matter- IS 1699:1995)	-
3.2 and 7 Table 1 (iv) (Combined ether extracts- IS 1699:1995)	-
3.2 and 7 Table 1 (viii) (Lead - IS 1699:1995)	-
3.2 and 7 Table 1 (ix) (Arsenic- IS 1699:1995)	-
3.2 and 7 Table 1 (x) (Mercury - IS 1699:1995)	-
3.2 and 7 Table 1 (xi) (Copper - IS 1699:1995)	-
3.2 and 7 Table 1 (xii) (Chromium - IS 1699:1995)	-
3.2 and 7 Table 1 (xiii) (Cadmium - IS 1699:1995)	-

-
-

5007

BIS, Central Laboratory (CL)

None

IS 2124 (2023)

SODIUM BICARBONATE SPECIFICATION

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4.1 (Description)	-
Cl-4.2, Table-1 (i) (Total alkalinity (as NaHCO3) percent by mass, Min)	-
Cl-4.2, Table-1 (ii) (pH (1 percent aqueous solution), Max)	-
Cl-4.2, Table-1 (iii) (Chlorides (as Cl), percent by mass, Max)	-
Cl-4.2, Table-1 (iv) (Insoluble matter, percent by mass, Max)	-
Cl-4.2, Table-1 (v) (Sulphates (as SO4) percent by mass, Max)	-
Cl-4.2, Table-1 (vi) (Iron (as Fe), percent by mass Max)	-
Cl-4.2, Table-1 (vii) (Heavy metals (as Pb), ppm, Max)	-
Cl-4.2, Table-1 (viii) (Arsenic (as As), ppm, box)	-
Cl-4.2, Table-1 (ix) (Ammonium compounds (as NH4) ppm, Max)	-
Cl-4.2, Table-1 (x) (Phosphates (as P4), percent by mass, Max)	-
Cl-4.2, Table-1 (xi) (Calcium and magnesium (as Ca), percent by mass, Max)	-
Cl-4.2, Table-1 (xii) (Copper (as Cu), ppm, Max)	-
Cl-4.2, Table-1 (xiii) (Nitrates (as NO3), percent by mass, Max)	-
Cl-4.2, Table-1 (xiv) (Silicates (as SiO2), percent by mass, Max)	-
Cl-4.2, Table-1 (xv) (Potassium (as K), percent by mass, Max)	-
Cl-4.2, Table-1 (xvi) (Substances reducing iodine percent by mass, Max)	-

-
-

5008

BIS, Central Laboratory (CL)

None

IS 1855 (2024)

STRANDED STEEL WIRE ROPES FOR WINDING AND MAN-RIDING HAULAGES IN MINES - SPECIFICATION ( Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-6.2.1 (Fibre Core)	-

-
-

5009

BIS, Central Laboratory (CL)

None

IS 1698 (2024)

Indigo carmine, food grade - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Test for Colour- IS 1698:2024)	-
3.3 and 7 Table 1 (i) (Total dye content - IS 1698:2024)	-
3.3 and 7 Table 1 (ii) (Loss on drying at 135° C and Chlorides and sulphates - IS 1699: 1995)	-
3.3 and 7 Table 1 (iii) (Water Insoluble Matter- IS 1698:2024)	-
3.3 and 7 Table 1 (iv) (Combined ether extracts- IS 1698:2024)	-
3.3 and 7 Table 1 (ix) (Lead - IS 1699:1995)	-
3.3 and 7 Table 1 (x) (Arsenic- IS 1699:1995)	-
3.3 and 7 Table 1 (xi) (Mercury - IS 1699:1995)	-
3.3 and 7 Table 1 (xii) (Copper - IS 1699:1995)	-
3.3 and 7 Table 1 (xiii) (Chromium - IS 1699:1995)	-
3.3 and 7 Table 1 (xiv) (Cadmium - IS 1699:1995)	-

-
-

5010

BIS, Central Laboratory (CL)

None

IS 1697 (2024)

Erythrosine, food grade - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 and 7 Table 1 (i) (Total dye content - IS 1697:2024)	-
3.1 and 7 Table 1 (ii) (Loss on drying at 135° C and Chlorides and sulphates - IS 1699: 1995)	-
3.1 and 7 Table 1 (iii) (Water Insoluble Matter- IS 1699:1995)	-
3.1 and 7 Table 1 (iv) (Ether Extractable matter (alkaline)- IS 1699:1995)	-
3.1 and 7 Table 1 (x) (Lead - IS 1699:1995)	-
3.1 and 7 Table 1 (xi) (Arsenic- IS 1699:1995)	-
3.1 and 7 Table 1 (xii) (Mercury - IS 1699:1995)	-
3.1 and 7 Table 1 (xiii) (Copper - IS 1699:1995)	-
3.1 and 7 Table 1 (xiv) (Chromium - IS 1699:1995)	-
3.1 and 7 Table 1 (xv) (Cadmium - IS 1699:1995)	-
3.1 and 7 Table 1 (xvi) (Zinc - IS 1699:1995)	-
3.1 and 7 Table 1 (xi) (Arsenic- IS 1699:1995)	-

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number